aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2018-08-07 01:59:23 +0900
committerMathias Kresin <dev@kresin.me>2018-08-09 18:44:57 +0200
commit23519edbcaa9cfd24b5a6fff44770f0fa9e13f3c (patch)
treecdd6d5bfa0fb10a97dcac2910223502109141a51 /target
parent2e02fdb3637c7a0320d230a3232d61e874c1e4d1 (diff)
downloadupstream-23519edbcaa9cfd24b5a6fff44770f0fa9e13f3c.tar.gz
upstream-23519edbcaa9cfd24b5a6fff44770f0fa9e13f3c.tar.bz2
upstream-23519edbcaa9cfd24b5a6fff44770f0fa9e13f3c.zip
ath79: add support for Buffalo BHR-4GRV2
Buffalo BHR-4GRV2 is a wired router, based on Qualcomm Atheros QCA9558. Ported from ar71xx target. Specification: - Qualcomm Atheros QCA9558 - 64 MB of RAM - 16 MB of Flash - 5x 10/100/1000 Ethernet - QCA8337N - 4x LEDs, 2x keys - UART header on PCB - Vcc, TX, RX, GND from LED side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port of BHR-4GRV2 2. Connect power cable to BHR-4GRV2 and turn on it 3. Access to "http://192.168.12.1/" and open firmware update page ("ファームウェア更新") 4. Select the OpenWrt factory image and click update ("更新実行") button 5. Wait ~120 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target')
-rw-r--r--target/linux/ar71xx/image/tiny.mk9
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ath79/base-files/lib/upgrade/platform.sh4
-rw-r--r--target/linux/ath79/dts/qca9558_buffalo_bhr-4grv2.dts152
-rw-r--r--target/linux/ath79/image/Makefile1
-rw-r--r--target/linux/ath79/image/tiny.mk18
6 files changed, 179 insertions, 9 deletions
diff --git a/target/linux/ar71xx/image/tiny.mk b/target/linux/ar71xx/image/tiny.mk
index d96a7cd92d..86ed2c7f2b 100644
--- a/target/linux/ar71xx/image/tiny.mk
+++ b/target/linux/ar71xx/image/tiny.mk
@@ -1,12 +1,3 @@
-define Build/mkbuffaloimg
- $(STAGING_DIR_HOST)/bin/mkbuffaloimg -B $(BOARDNAME) \
- -R $$(($(subst k, * 1024,$(ROOTFS_SIZE)))) \
- -K $$(($(subst k, * 1024,$(KERNEL_SIZE)))) \
- -i $@ -o $@.new
- mv $@.new $@
-endef
-
-
define Device/bhr-4grv2
DEVICE_TITLE := Buffalo BHR-4GRV2
BOARDNAME := BHR-4GRV2
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 9ec78ece23..573bc80462 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -25,6 +25,10 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
+ buffalo,bhr-4grv2)
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
+ ;;
embeddedwireless,dorin)
ucidef_add_switch "switch0" \
"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
diff --git a/target/linux/ath79/base-files/lib/upgrade/platform.sh b/target/linux/ath79/base-files/lib/upgrade/platform.sh
index dfcf70487b..08039e0052 100644
--- a/target/linux/ath79/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/base-files/lib/upgrade/platform.sh
@@ -13,6 +13,10 @@ platform_do_upgrade() {
local board=$(board_name)
case "$board" in
+ buffalo,bhr-4grv2)
+ PART_NAME="rootfs:kernel"
+ default_do_upgrade "$ARGV"
+ ;;
*)
default_do_upgrade "$ARGV"
;;
diff --git a/target/linux/ath79/dts/qca9558_buffalo_bhr-4grv2.dts b/target/linux/ath79/dts/qca9558_buffalo_bhr-4grv2.dts
new file mode 100644
index 0000000000..25c673a58b
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_buffalo_bhr-4grv2.dts
@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ compatible = "buffalo,bhr-4grv2", "qca,qca9557";
+ model = "Buffalo BHR-4GRV2";
+
+ aliases {
+ led-status = &power;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power: power {
+ label = "bhr-4grv2:green:power";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ diag {
+ label = "bhr-4grv2:orange:diag";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ vpn_orange {
+ label = "bhr-4grv2:orange:vpn";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+
+ vpn_green {
+ label = "bhr-4grv2:green:vpn";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ debounce-interval = <60>;
+ };
+
+ eco {
+ label = "eco";
+ gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ debounce-interval = <60>;
+ };
+ };
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "rootfs";
+ reg = <0x050000 0xe30000>;
+ };
+
+ partition@e80000 {
+ label = "kernel";
+ reg = <0xe80000 0x170000>;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+
+ qca,ar8327-initvals = <
+ 0x04 0x80080080 /* PORT0 PAD MODE CTRL */
+ 0x0c 0x07600000 /* PORT6 PAD MODE CTRL */
+ 0x7c 0x0000007e /* PORT0_STATUS */
+ 0x94 0x0000007e /* PORT6 STATUS */
+ >;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+ phy-handle = <&phy0>;
+ pll-data = <0x56000000 0x00000101 0x00001616>;
+};
+
+&eth1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x6>;
+ pll-data = <0x03000101 0x00000101 0x00001616>;
+
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+};
+
+&uart {
+ status = "okay";
+};
diff --git a/target/linux/ath79/image/Makefile b/target/linux/ath79/image/Makefile
index 15f4c1883a..734f27e689 100644
--- a/target/linux/ath79/image/Makefile
+++ b/target/linux/ath79/image/Makefile
@@ -75,6 +75,7 @@ ifeq ($(SUBTARGET),nand)
include ./nand.mk
endif
ifeq ($(SUBTARGET),tiny)
+include ./tiny.mk
include ./tiny-netgear.mk
include ./tiny-tp-link.mk
endif
diff --git a/target/linux/ath79/image/tiny.mk b/target/linux/ath79/image/tiny.mk
new file mode 100644
index 0000000000..0a14fcdd5b
--- /dev/null
+++ b/target/linux/ath79/image/tiny.mk
@@ -0,0 +1,18 @@
+DEVICE_VARS += ROOTFS_SIZE
+
+define Device/buffalo_bhr-4grv2
+ ATH_SOC := qca9558
+ DEVICE_TITLE := Buffalo BHR-4GRV2
+ BOARDNAME := BHR-4GRV2
+ ROOTFS_SIZE := 14528k
+ KERNEL_SIZE := 1472k
+ IMAGE_SIZE := 16000k
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := \
+ append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | \
+ append-kernel | append-metadata | check-size $$$$(IMAGE_SIZE)
+ IMAGE/factory.bin := append-kernel | \
+ pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | mkbuffaloimg
+ SUPPORTED_DEVICES += bhr-4grv2
+endef
+TARGET_DEVICES += buffalo_bhr-4grv2