aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-04-01 21:54:58 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-04-06 09:58:11 +0200
commitc3083b96495685c6c37fa2a5d8ade0dfa845465e (patch)
tree54c30e5787a08e78e7950804f2c629626d012077 /target
parent4b8d274456db40f1ca202308a7a1fa93629aedb6 (diff)
downloadupstream-c3083b96495685c6c37fa2a5d8ade0dfa845465e.tar.gz
upstream-c3083b96495685c6c37fa2a5d8ade0dfa845465e.tar.bz2
upstream-c3083b96495685c6c37fa2a5d8ade0dfa845465e.zip
ipq806x: remove support for kernel 4.14
This target has been on kernel 4.19 for several months [1] and already uses kernel 5.4 as testing kernel. Therefore, it should not be necessary to keep support for kernel 4.14 as well. [1] 2a82e0e1ca0f ("ipq806x: switch to 4.19 kernel version") Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de> Acked-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> [ipq8065/nbg6817]
Diffstat (limited to 'target')
-rw-r--r--target/linux/ipq806x/config-4.14489
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts248
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts277
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts494
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts408
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts232
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts400
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts382
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts407
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi30
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts417
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts442
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts568
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts535
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi1410
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts386
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts513
-rw-r--r--target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi78
-rw-r--r--target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch71
-rw-r--r--target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch966
-rw-r--r--target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch40
-rw-r--r--target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch282
-rw-r--r--target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch616
-rw-r--r--target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch29
-rw-r--r--target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch147
-rw-r--r--target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch195
-rw-r--r--target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch352
-rw-r--r--target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch206
-rw-r--r--target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch129
-rw-r--r--target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch241
-rw-r--r--target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch209
-rw-r--r--target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch436
-rw-r--r--target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch160
-rw-r--r--target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch307
-rw-r--r--target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch66
-rw-r--r--target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch72
-rw-r--r--target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch26
-rw-r--r--target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch147
-rw-r--r--target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch52
-rw-r--r--target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch38
-rw-r--r--target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch55
-rw-r--r--target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch128
-rw-r--r--target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch90
-rw-r--r--target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch23
-rw-r--r--target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch29
-rw-r--r--target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch62
-rw-r--r--target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch23
-rw-r--r--target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch25
-rw-r--r--target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch627
-rw-r--r--target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch453
-rw-r--r--target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch93
-rw-r--r--target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch21
-rw-r--r--target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch189
-rw-r--r--target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch31
-rw-r--r--target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch16
-rw-r--r--target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch95
-rw-r--r--target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch85
-rw-r--r--target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch126
-rw-r--r--target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch114
-rw-r--r--target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch61
-rw-r--r--target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch69
-rw-r--r--target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch91
-rw-r--r--target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch25
-rw-r--r--target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch12
-rw-r--r--target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch183
-rw-r--r--target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch71
-rw-r--r--target/linux/ipq806x/patches-4.14/0075-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch50
-rw-r--r--target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch22
-rw-r--r--target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch11026
-rw-r--r--target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch177
70 files changed, 0 insertions, 26575 deletions
diff --git a/target/linux/ipq806x/config-4.14 b/target/linux/ipq806x/config-4.14
deleted file mode 100644
index 38f5c94507..0000000000
--- a/target/linux/ipq806x/config-4.14
+++ /dev/null
@@ -1,489 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_AMBA_PL08X is not set
-# CONFIG_APQ_GCC_8084 is not set
-# CONFIG_APQ_MMCC_8084 is not set
-CONFIG_AR8216_PHY=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-# CONFIG_ARCH_MDM9615 is not set
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_QCOM=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-# CONFIG_ARM_CPU_TOPOLOGY is not set
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_QCOM_CPUFREQ=y
-CONFIG_ARM_QCOM_CPUIDLE=y
-# CONFIG_ARM_SMMU is not set
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-# CONFIG_BINFMT_FLAT is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_MQ_PCI=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_BOUNCE=y
-CONFIG_BUS_TOPOLOGY_ADHOC=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLKSRC_QCOM=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_QCOM=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_GPIO=y
-# CONFIG_DEBUG_UART_8250 is not set
-CONFIG_DEBUG_UNCOMPRESS=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-# CONFIG_DWMAC_DWC_QOS_ETH is not set
-# CONFIG_DWMAC_GENERIC is not set
-CONFIG_DWMAC_IPQ806X=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ETHERNET_PACKET_MANGLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SMCCC=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CBPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HWMON=y
-CONFIG_HWSPINLOCK=y
-CONFIG_HWSPINLOCK_QCOM=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MSM=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_QUP=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-# CONFIG_IPQ_GCC_4019 is not set
-CONFIG_IPQ_GCC_806X=y
-# CONFIG_IPQ_GCC_8074 is not set
-# CONFIG_IPQ_LCC_806X is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_KPSS_XCC=y
-CONFIG_KRAITCC=y
-CONFIG_KRAIT_CLOCKS=y
-CONFIG_KRAIT_L2_ACCESSORS=y
-CONFIG_LIBFDT=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MDIO_GPIO=y
-# CONFIG_MDM_GCC_9615 is not set
-# CONFIG_MDM_LCC_9615 is not set
-# CONFIG_MFD_MAX77620 is not set
-CONFIG_MFD_QCOM_RPM=y
-# CONFIG_MFD_SPMI_PMIC is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=16
-CONFIG_MMC_QCOM_DML=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_MSM=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MSM_BUS_SCALING=y
-CONFIG_MSM_GCC_8660=y
-# CONFIG_MSM_GCC_8916 is not set
-# CONFIG_MSM_GCC_8960 is not set
-# CONFIG_MSM_GCC_8974 is not set
-# CONFIG_MSM_GCC_8994 is not set
-# CONFIG_MSM_GCC_8996 is not set
-# CONFIG_MSM_IOMMU is not set
-# CONFIG_MSM_LCC_8960 is not set
-# CONFIG_MSM_MMCC_8960 is not set
-# CONFIG_MSM_MMCC_8974 is not set
-# CONFIG_MSM_MMCC_8996 is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_QCOM=y
-# CONFIG_MTD_PHYSMAP_OF_VERSATILE is not set
-CONFIG_MTD_QCOM_SMEM_PARTS=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_FIT_FW=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_HWMON=y
-CONFIG_NET_DSA_QCA8K=y
-CONFIG_NET_DSA_TAG_QCA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=2
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_QCOM=y
-CONFIG_PCI_DEBUG=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_QCOM_APQ8064_SATA is not set
-CONFIG_PHY_QCOM_IPQ806X_SATA=y
-# CONFIG_PHY_QCOM_QMP is not set
-# CONFIG_PHY_QCOM_QUSB2 is not set
-# CONFIG_PHY_QCOM_UFS is not set
-CONFIG_PINCTRL=y
-# CONFIG_PINCTRL_APQ8064 is not set
-# CONFIG_PINCTRL_APQ8084 is not set
-# CONFIG_PINCTRL_IPQ4019 is not set
-CONFIG_PINCTRL_IPQ8064=y
-# CONFIG_PINCTRL_IPQ8074 is not set
-# CONFIG_PINCTRL_MDM9615 is not set
-CONFIG_PINCTRL_MSM=y
-# CONFIG_PINCTRL_MSM8660 is not set
-# CONFIG_PINCTRL_MSM8916 is not set
-# CONFIG_PINCTRL_MSM8960 is not set
-# CONFIG_PINCTRL_MSM8994 is not set
-# CONFIG_PINCTRL_MSM8996 is not set
-# CONFIG_PINCTRL_MSM8X74 is not set
-# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
-# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
-# CONFIG_PL330_DMA is not set
-CONFIG_PM_OPP=y
-CONFIG_POWER_RESET=y
-# CONFIG_POWER_RESET_BRCMKONA is not set
-CONFIG_POWER_RESET_MSM=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_QCOM_ADM=y
-CONFIG_QCOM_BAM_DMA=y
-CONFIG_QCOM_CLK_RPM=y
-# CONFIG_QCOM_EBI2 is not set
-CONFIG_QCOM_GDSC=y
-CONFIG_QCOM_GSBI=y
-CONFIG_QCOM_HFPLL=y
-# CONFIG_QCOM_IOMMU is not set
-CONFIG_QCOM_PM=y
-# CONFIG_QCOM_Q6V5_PIL is not set
-CONFIG_QCOM_QFPROM=y
-CONFIG_QCOM_RPMCC=y
-CONFIG_QCOM_SCM=y
-CONFIG_QCOM_SCM_32=y
-# CONFIG_QCOM_SMD is not set
-CONFIG_QCOM_SMEM=y
-# CONFIG_QCOM_SMP2P is not set
-# CONFIG_QCOM_SMSM is not set
-CONFIG_QCOM_TCSR=y
-CONFIG_QCOM_TSENS=y
-# CONFIG_QCOM_WCNSS_PIL is not set
-CONFIG_QCOM_WDT=y
-# CONFIG_QRTR is not set
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_CPU_STALL_TIMEOUT=21
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_QCOM_RPM=y
-# CONFIG_REGULATOR_QCOM_SPMI is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-# CONFIG_RPMSG_QCOM_SMD is not set
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SCHED_INFO is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_CADENCE_QUADSPI is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_QUP=y
-CONFIG_SPMI=y
-CONFIG_SPMI_MSM_PMIC_ARB=y
-CONFIG_SRCU=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-CONFIG_SWCONFIG=y
-CONFIG_SWCONFIG_LEDS=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_QCOM_8X16_PHY is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USE_OF=y
-CONFIG_VDSO=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
deleted file mode 100644
index 655f9fba37..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ /dev/null
@@ -1,248 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
- model = "Qualcomm IPQ8064/AP148";
- compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
- mdio-gpio0 = &mdio0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- pinmux@800000 {
- i2c4_pins: i2c4_pinmux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- bias-disable;
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- drive-strength = <10>;
- bias-none;
- };
- };
- nand_pins: nand_pins {
- mux {
- pins = "gpio34", "gpio35", "gpio36",
- "gpio37", "gpio38", "gpio39",
- "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- function = "nand";
- drive-strength = <10>;
- bias-disable;
- };
- pullups {
- pins = "gpio39";
- bias-pull-up;
- };
- hold {
- pins = "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- bias-bus-hold;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
- };
- };
-
- gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
- status = "ok";
- };
-
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
- };
-
- gsbi5: gsbi@1a200000 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "ok";
-
- spi4: spi@1a280000 {
- status = "ok";
- spi-max-frequency = <50000000>;
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 0>;
-
- flash: m25p80@0 {
- compatible = "s25fl256s1";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "qcom,smem";
- };
- };
- };
- };
-
- sata-phy@1b400000 {
- status = "ok";
- };
-
- sata@29000000 {
- status = "ok";
- };
-
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "ok";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "ok";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "ok";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "ok";
- };
-
- usb30@0 {
- status = "ok";
- };
-
- usb30@1 {
- status = "ok";
- };
-
- pcie0: pci@1b500000 {
- status = "ok";
- };
-
- pcie1: pci@1b700000 {
- status = "ok";
- force_gen1 = <1>;
- };
-
- nand@1ac00000 {
- status = "ok";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- cs0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "qcom,smem";
- };
- };
- };
-
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
- };
-
- gmac1: ethernet@37200000 {
- status = "ok";
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- gmac2: ethernet@37400000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-};
-
-&adm_dma {
- status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
deleted file mode 100644
index 7e589be2c3..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
+++ /dev/null
@@ -1,277 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
- model = "Qualcomm IPQ8064/AP161";
- compatible = "qcom,ipq8064-ap161", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
- mdio-gpio0 = &mdio0;
- };
-
- chosen {
- linux,stdout-path = "serial0:115200n8";
- };
-
- soc {
- pinmux@800000 {
- i2c4_pins: i2c4_pinmux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- bias-disable;
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- drive-strength = <10>;
- bias-none;
- };
- };
- nand_pins: nand_pins {
- mux {
- pins = "gpio34", "gpio35", "gpio36",
- "gpio37", "gpio38", "gpio39",
- "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- function = "nand";
- drive-strength = <10>;
- bias-disable;
- };
- pullups {
- pins = "gpio39";
- bias-pull-up;
- };
- hold {
- pins = "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- bias-bus-hold;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio2", "gpio27", "gpio28",
- "gpio29", "gpio30", "gpio31",
- "gpio32", "gpio51", "gpio52",
- "gpio59", "gpio60", "gpio61",
- "gpio62" , "gpio66";
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
- };
- };
-
- gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
- status = "ok";
- };
-
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
- };
-
- gsbi5: gsbi@1a200000 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "ok";
-
- spi4: spi@1a280000 {
- status = "ok";
- spi-max-frequency = <50000000>;
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 0>;
-
- flash: m25p80@0 {
- compatible = "s25fl256s1";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "qcom,smem";
- };
- };
- };
- };
-
- sata-phy@1b400000 {
- status = "ok";
- };
-
- sata@29000000 {
- status = "ok";
- };
-
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "ok";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "ok";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "ok";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "ok";
- };
-
- usb30@0 {
- status = "ok";
- };
-
- usb30@1 {
- status = "ok";
- };
-
- pcie0: pci@1b500000 {
- status = "ok";
- };
-
- pcie1: pci@1b700000 {
- status = "ok";
- force_gen1 = <1>;
- };
-
- pcie2: pci@1b900000 {
- status = "ok";
- };
-
- nand@1ac00000 {
- status = "ok";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- cs0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "qcom,smem";
- };
- };
- };
-
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x20080 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- qca,phy-rgmii-en;
- qca,txclk-delay-en;
- qca,rxclk-delay-en;
- };
-
- phy3: ethernet-phy@3 {
- device_type = "ethernet-phy";
- reg = <3>;
- };
- };
-
- gmac0: ethernet@37000000 {
- status = "ok";
- phy-mode = "rgmii";
- qcom,id = <0>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
- mdiobus = <&mdio0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- gmac1: ethernet@37200000 {
- status = "ok";
- phy-mode = "rgmii";
- qcom,id = <1>;
- mdiobus = <&mdio0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- gmac2: ethernet@37400000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <2>;
- mdiobus = <&mdio0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-};
-
-&adm_dma {
- status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
deleted file mode 100644
index c4fb2524c8..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+++ /dev/null
@@ -1,494 +0,0 @@
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "TP-Link Archer C2600";
- compatible = "tplink,c2600", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
- mdio-gpio0 = &mdio0;
-
- led-boot = &power;
- led-failsafe = &general;
- led-running = &power;
- led-upgrade = &general;
- label-mac-device = &gmac2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- pinmux@800000 {
- button_pins: button_pins {
- mux {
- pins = "gpio16", "gpio54", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- i2c4_pins: i2c4_pinmux {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio26", "gpio33",
- "gpio53", "gpio66";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- bias-pull-down;
- };
-
- data {
- pins = "gpio18", "gpio19";
- drive-strength = <10>;
- };
-
- cs {
- pins = "gpio20";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio21";
- drive-strength = <12>;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- usb0_pwr_en_pin: usb0_pwr_en_pin {
- mux {
- pins = "gpio25";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- output-high;
- };
- };
-
- usb1_pwr_en_pin: usb1_pwr_en_pin {
- mux {
- pins = "gpio23";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- output-high;
- };
- };
- };
-
- gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
- status = "ok";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
- };
-
- gsbi5: gsbi@1a200000 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "ok";
-
- spi5: spi@1a280000 {
- status = "ok";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash: m25p80@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- MIBIB@20000 {
- label = "MIBIB";
- reg = <0x20000 0x20000>;
- read-only;
- };
-
- SBL2@40000 {
- label = "SBL2";
- reg = <0x40000 0x20000>;
- read-only;
- };
-
- SBL3@60000 {
- label = "SBL3";
- reg = <0x60000 0x30000>;
- read-only;
- };
-
- DDRCONFIG@90000 {
- label = "DDRCONFIG";
- reg = <0x90000 0x10000>;
- read-only;
- };
-
- SSD@a0000 {
- label = "SSD";
- reg = <0xa0000 0x10000>;
- read-only;
- };
-
- TZ@b0000 {
- label = "TZ";
- reg = <0xb0000 0x30000>;
- read-only;
- };
-
- RPM@e0000 {
- label = "RPM";
- reg = <0xe0000 0x20000>;
- read-only;
- };
-
- fs-uboot@100000 {
- label = "fs-uboot";
- reg = <0x100000 0x70000>;
- read-only;
- };
-
- uboot-env@170000 {
- label = "uboot-env";
- reg = <0x170000 0x40000>;
- read-only;
- };
-
- radio@1b0000 {
- label = "radio";
- reg = <0x1b0000 0x40000>;
- read-only;
- };
-
- os-image@1f0000 {
- label = "os-image";
- reg = <0x1f0000 0x400000>;
- };
-
- rootfs@5f0000 {
- label = "rootfs";
- reg = <0x5f0000 0x1900000>;
- };
-
- defaultmac: default-mac@1ef0000 {
- label = "default-mac";
- reg = <0x1ef0000 0x00200>;
- read-only;
- };
-
- pin@1ef0200 {
- label = "pin";
- reg = <0x1ef0200 0x00200>;
- read-only;
- };
-
- product-info@1ef0400 {
- label = "product-info";
- reg = <0x1ef0400 0x0fc00>;
- read-only;
- };
-
- partition-table@1f00000 {
- label = "partition-table";
- reg = <0x1f00000 0x10000>;
- read-only;
- };
-
- soft-version@1f10000 {
- label = "soft-version";
- reg = <0x1f10000 0x10000>;
- read-only;
- };
-
- support-list@1f20000 {
- label = "support-list";
- reg = <0x1f20000 0x10000>;
- read-only;
- };
-
- profile@1f30000 {
- label = "profile";
- reg = <0x1f30000 0x10000>;
- read-only;
- };
-
- default-config@1f40000 {
- label = "default-config";
- reg = <0x1f40000 0x10000>;
- read-only;
- };
-
- user-config@1f50000 {
- label = "user-config";
- reg = <0x1f50000 0x40000>;
- read-only;
- };
-
- qos-db@1f90000 {
- label = "qos-db";
- reg = <0x1f90000 0x40000>;
- read-only;
- };
-
- usb-config@1fd0000 {
- label = "usb-config";
- reg = <0x1fd0000 0x10000>;
- read-only;
- };
-
- log@1fe0000 {
- label = "log";
- reg = <0x1fe0000 0x20000>;
- read-only;
- };
- };
- };
- };
-
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "ok";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "ok";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "ok";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "ok";
- };
-
- usb30@0 {
- status = "ok";
-
- pinctrl-0 = <&usb0_pwr_en_pin>;
- pinctrl-names = "default";
- };
-
- usb30@1 {
- status = "ok";
-
- pinctrl-0 = <&usb1_pwr_en_pin>;
- pinctrl-names = "default";
- };
-
- pcie0: pci@1b500000 {
- status = "ok";
- };
-
- pcie1: pci@1b700000 {
- status = "ok";
- force_gen1 = <1>;
- };
-
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
- };
-
- gmac1: ethernet@37200000 {
- status = "ok";
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- mtd-mac-address = <&defaultmac 0x8>;
- mtd-mac-address-increment = <1>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- gmac2: ethernet@37400000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- mtd-mac-address = <&defaultmac 0x8>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 49 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- ledswitch {
- label = "ledswitch";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_LIGHTS_TOGGLE>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- lan {
- label = "c2600:white:lan";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
- };
-
- usb4 {
- label = "c2600:white:usb_4";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb2 {
- label = "c2600:white:usb_2";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "c2600:white:wps";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- wan_amber {
- label = "c2600:amber:wan";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
- };
-
- wan_white {
- label = "c2600:white:wan";
- gpios = <&qcom_pinmux 33 GPIO_ACTIVE_LOW>;
- };
-
- power: power {
- label = "c2600:white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- general: general {
- label = "c2600:white:general";
- gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&adm_dma {
- status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
deleted file mode 100644
index 1760b1968f..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
+++ /dev/null
@@ -1,408 +0,0 @@
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Netgear Nighthawk X4 D7800";
- compatible = "netgear,d7800", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0xe000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
- mdio-gpio0 = &mdio0;
-
- led-boot = &power_white;
- led-failsafe = &power_amber;
- led-running = &power_white;
- led-upgrade = &power_amber;
- };
-
- chosen {
- bootargs = "rootfstype=squashfs noinitrd";
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- pinmux@800000 {
- button_pins: button_pins {
- mux {
- pins = "gpio6", "gpio54", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- i2c4_pins: i2c4_pinmux {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
- "gpio24","gpio26", "gpio53", "gpio64";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- mux {
- pins = "gpio34", "gpio35", "gpio36",
- "gpio37", "gpio38", "gpio39",
- "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- function = "nand";
- drive-strength = <10>;
- bias-disable;
- };
- pullups {
- pins = "gpio39";
- bias-pull-up;
- };
- hold {
- pins = "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- bias-bus-hold;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- usb0_pwr_en_pins: usb0_pwr_en_pins {
- mux {
- pins = "gpio15";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-high;
- };
- };
-
- usb1_pwr_en_pins: usb1_pwr_en_pins {
- mux {
- pins = "gpio16", "gpio68";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-high;
- };
- };
- };
-
- gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
- status = "ok";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
- };
-
- sata-phy@1b400000 {
- status = "ok";
- };
-
- sata@29000000 {
- ports-implemented = <0x1>;
- status = "ok";
- };
-
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "ok";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "ok";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "ok";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "ok";
- };
-
- usb30@0 {
- status = "ok";
-
- pinctrl-0 = <&usb0_pwr_en_pins>;
- pinctrl-names = "default";
- };
-
- usb30@1 {
- status = "ok";
-
- pinctrl-0 = <&usb1_pwr_en_pins>;
- pinctrl-names = "default";
- };
-
- pcie0: pci@1b500000 {
- status = "ok";
- reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-names = "default";
- };
-
- pcie1: pci@1b700000 {
- status = "ok";
- reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&pcie1_pins>;
- pinctrl-names = "default";
- force_gen1 = <1>;
- };
-
- nand@1ac00000 {
- status = "ok";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- cs0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- qcadata@0 {
- label = "qcadata";
- reg = <0x0000000 0x0c80000>;
- read-only;
- };
-
- APPSBL@c80000 {
- label = "APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
-
- APPSBLENV@1180000 {
- label = "APPSBLENV";
- reg = <0x1180000 0x0080000>;
- read-only;
- };
-
- art: art@1200000 {
- label = "art";
- reg = <0x1200000 0x0140000>;
- read-only;
- };
-
- artbak: art@1340000 {
- label = "artbak";
- reg = <0x1340000 0x0140000>;
- read-only;
- };
-
- kernel@1480000 {
- label = "kernel";
- reg = <0x1480000 0x0400000>;
- };
-
- ubi@1880000 {
- label = "ubi";
- reg = <0x1880000 0x1C00000>;
- };
-
- netgear@3480000 {
- label = "netgear";
- reg = <0x3480000 0x4480000>;
- read-only;
- };
-
- reserve@7900000 {
- label = "reserve";
- reg = <0x7900000 0x0700000>;
- read-only;
- };
- };
- };
- };
-
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
- };
-
- gmac1: ethernet@37200000 {
- status = "ok";
- phy-mode = "rgmii";
- phy-handle = <&phy4>;
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- mtd-mac-address = <&art 6>;
- };
-
- gmac2: ethernet@37400000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- mtd-mac-address = <&art 0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- usb1 {
- label = "d7800:white:usb1";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb2 {
- label = "d7800:white:usb2";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- power_amber: power_amber {
- label = "d7800:amber:power";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- wan_white {
- label = "d7800:white:wan";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- wan_amber {
- label = "d7800:amber:wan";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "d7800:white:wps";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
-
- esata {
- label = "d7800:white:esata";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
-
- power_white: power_white {
- label = "d7800:white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- wifi {
- label = "d7800:white:wifi";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&adm_dma {
- status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts
deleted file mode 100644
index f4cface193..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ /dev/null
@@ -1,232 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
- model = "Qualcomm IPQ8064/DB149";
- compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- alias {
- serial0 = &uart2;
- mdio-gpio0 = &mdio0;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- pinmux@800000 {
- i2c4_pins: i2c4_pinmux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- bias-disable;
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- drive-strength = <10>;
- bias-none;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- rgmii0_pins: rgmii0_pins {
- mux {
- pins = "gpio2", "gpio66";
- drive-strength = <8>;
- bias-disable;
- };
- };
- };
-
- gsbi2: gsbi@12480000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- uart2: serial@12490000 {
- status = "ok";
- };
- };
-
- gsbi5: gsbi@1a200000 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "ok";
-
- spi4: spi@1a280000 {
- status = "ok";
- spi-max-frequency = <50000000>;
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 0>;
-
- flash: m25p80@0 {
- compatible = "s25fl256s1";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
- m25p,fast-read;
-
- partition@0 {
- label = "lowlevel_init";
- reg = <0x0 0x1b0000>;
- };
-
- partition@1 {
- label = "u-boot";
- reg = <0x1b0000 0x80000>;
- };
-
- partition@2 {
- label = "u-boot-env";
- reg = <0x230000 0x40000>;
- };
-
- partition@3 {
- label = "caldata";
- reg = <0x270000 0x40000>;
- };
-
- partition@4 {
- label = "firmware";
- reg = <0x2b0000 0x1d50000>;
- };
- };
- };
- };
-
- sata-phy@1b400000 {
- status = "ok";
- };
-
- sata@29000000 {
- status = "ok";
- };
-
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "ok";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "ok";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "ok";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "ok";
- };
-
- usb30@0 {
- status = "ok";
- };
-
- usb30@1 {
- status = "ok";
- };
-
- pcie0: pci@1b500000 {
- status = "ok";
- };
-
- pcie1: pci@1b700000 {
- status = "ok";
- };
-
- pcie2: pci@1b900000 {
- status = "ok";
- };
-
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
-
- phy6: ethernet-phy@6 {
- reg = <6>;
- };
-
- phy7: ethernet-phy@7 {
- reg = <7>;
- };
- };
-
- gmac0: ethernet@37000000 {
- status = "ok";
- phy-mode = "rgmii";
- qcom,id = <0>;
- phy-handle = <&phy4>;
-
- pinctrl-0 = <&rgmii0_pins>;
- pinctrl-names = "default";
- };
-
- gmac1: ethernet@37200000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <1>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- gmac2: ethernet@37400000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <2>;
- phy-handle = <&phy6>;
- };
-
- gmac3: ethernet@37600000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <3>;
- phy-handle = <&phy7>;
- };
- };
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
deleted file mode 100644
index ca8376afd7..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ /dev/null
@@ -1,400 +0,0 @@
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Linksys EA8500 WiFi Router";
- compatible = "linksys,ea8500", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
- mdio-gpio0 = &mdio0;
-
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- chosen {
- bootargs = "console=ttyMSM0,115200n8";
- stdout-path = "serial0:115200n8";
- append-rootblock = "ubi.mtd="; /* append to bootargs adding the root deviceblock nbr from bootloader */
- };
-
- soc {
- pinmux@800000 {
- button_pins: button_pins {
- mux {
- pins = "gpio65", "gpio67", "gpio68";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- i2c4_pins: i2c4_pinmux {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio6", "gpio53", "gpio54";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- mux {
- pins = "gpio34", "gpio35", "gpio36",
- "gpio37", "gpio38", "gpio39",
- "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- function = "nand";
- drive-strength = <10>;
- bias-disable;
- };
- pullups {
- pins = "gpio39";
- bias-pull-up;
- };
- hold {
- pins = "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- bias-bus-hold;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
- };
- };
-
- gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
- status = "ok";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
- };
-
- sata-phy@1b400000 {
- status = "ok";
- };
-
- sata@29000000 {
- status = "ok";
- };
-
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "ok";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "ok";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "ok";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "ok";
- };
-
- usb30@0 {
- status = "ok";
- };
-
- usb30@1 {
- status = "ok";
- };
-
- pcie0: pci@1b500000 {
- status = "ok";
- force_gen1 = <1>;
- };
-
- pcie1: pci@1b700000 {
- status = "ok";
- };
-
- pcie2: pci@1b900000 {
- status = "ok";
- };
-
- nand@1ac00000 {
- status = "ok";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- cs0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0000000 0x0040000>;
- read-only;
- };
-
- MIBIB@40000 {
- label = "MIBIB";
- reg = <0x0040000 0x0140000>;
- read-only;
- };
-
- SBL2@180000 {
- label = "SBL2";
- reg = <0x0180000 0x0140000>;
- read-only;
- };
-
- SBL3@2c0000 {
- label = "SBL3";
- reg = <0x02c0000 0x0280000>;
- read-only;
- };
-
- DDRCONFIG@540000 {
- label = "DDRCONFIG";
- reg = <0x0540000 0x0120000>;
- read-only;
- };
-
- SSD@660000 {
- label = "SSD";
- reg = <0x0660000 0x0120000>;
- read-only;
- };
-
- TZ@780000 {
- label = "TZ";
- reg = <0x0780000 0x0280000>;
- read-only;
- };
-
- RPM@a00000 {
- label = "RPM";
- reg = <0x0a00000 0x0280000>;
- read-only;
- };
-
- art: art@c80000 {
- label = "art";
- reg = <0x0c80000 0x0140000>;
- read-only;
- };
-
- APPSBL@dc0000 {
- label = "APPSBL";
- reg = <0x0dc0000 0x0100000>;
- read-only;
- };
-
- u_env@ec0000 {
- label = "u_env";
- reg = <0x0ec0000 0x0040000>;
- };
-
- s_env@f00000 {
- label = "s_env";
- reg = <0x0f00000 0x0040000>;
- };
-
- devinfo@f40000 {
- label = "devinfo";
- reg = <0x0f40000 0x0040000>;
- };
-
- linux@f80000 {
- label = "kernel1";
- reg = <0x0f80000 0x2800000>; /* 3 MB spill to rootfs*/
- };
-
- rootfs@1280000 {
- label = "rootfs1";
- reg = <0x1280000 0x2500000>;
- };
-
- linux2@3780000 {
- label = "kernel2";
- reg = <0x3780000 0x2800000>;
- };
-
- rootfs2@3a80000 {
- label = "rootfs2";
- reg = <0x3a80000 0x2500000>;
- };
-
- syscfg@5f80000 {
- label = "syscfg";
- reg = <0x5f80000 0x2080000>;
- };
- };
- };
- };
-
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
- };
-
- gmac1: ethernet@37200000 {
- status = "ok";
- phy-mode = "rgmii";
- qcom,id = <1>;
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <1>;
- qcom,rgmii_delay = <0>;
- qcom,emulation = <0>;
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- //lan
- gmac2: ethernet@37400000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <2>;
- qcom,phy_mdio_addr = <0>; /* none */
- qcom,poll_required = <0>; /* no polling */
- qcom,rgmii_delay = <0>;
- qcom,emulation = <0>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- adm_dma: dma@18300000 {
- status = "ok";
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART >;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- wps {
- label = "ea8500:green:wps";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- };
-
- power: power {
- label = "ea8500:white:power";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- default-state = "keep";
- };
-
- wifi {
- label = "ea8500:green:wifi";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
deleted file mode 100644
index b6505dd541..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
+++ /dev/null
@@ -1,382 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- model = "Netgear Nighthawk X4 R7500";
- compatible = "netgear,r7500", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0xe000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
- mdio-gpio0 = &mdio0;
-
- led-boot = &power_white;
- led-failsafe = &power_amber;
- led-running = &power_white;
- led-upgrade = &power_amber;
- };
-
- chosen {
- bootargs = "rootfstype=squashfs noinitrd";
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- pinmux@800000 {
- button_pins: button_pins {
- mux {
- pins = "gpio6", "gpio54", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- i2c4_pins: i2c4_pinmux {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
- "gpio24","gpio26", "gpio53", "gpio64";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- mux {
- pins = "gpio34", "gpio35", "gpio36",
- "gpio37", "gpio38", "gpio39",
- "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- function = "nand";
- drive-strength = <10>;
- bias-disable;
- };
- pullups {
- pins = "gpio39";
- bias-pull-up;
- };
- hold {
- pins = "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- bias-bus-hold;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
- };
- };
-
- gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
- status = "ok";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
- };
-
- sata-phy@1b400000 {
- status = "ok";
- };
-
- sata@29000000 {
- status = "ok";
- };
-
- phy@100f8800 { /* USB3 port 1 HS phy */
- clocks = <&gcc USB30_0_UTMI_CLK>;
- status = "ok";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- clocks = <&gcc USB30_0_MASTER_CLK>;
- status = "ok";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- clocks = <&gcc USB30_1_UTMI_CLK>;
- status = "ok";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- clocks = <&gcc USB30_1_MASTER_CLK>;
- status = "ok";
- };
-
- usb30@0 {
- clocks = <&gcc USB30_1_MASTER_CLK>;
- status = "ok";
- };
-
- usb30@1 {
- clocks = <&gcc USB30_0_MASTER_CLK>;
- status = "ok";
- };
-
- pcie0: pci@1b500000 {
- status = "ok";
- };
-
- pcie1: pci@1b700000 {
- status = "ok";
- force_gen1 = <1>;
- };
-
- nand@1ac00000 {
- status = "ok";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- cs0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- qcadata@0 {
- label = "qcadata";
- reg = <0x0000000 0x0c80000>;
- read-only;
- };
-
- APPSBL@c80000 {
- label = "APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
-
- APPSBLENV@1180000 {
- label = "APPSBLENV";
- reg = <0x1180000 0x0080000>;
- read-only;
- };
-
- art: art@1200000 {
- label = "art";
- reg = <0x1200000 0x0140000>;
- read-only;
- };
-
- kernel@1340000 {
- label = "kernel";
- reg = <0x1340000 0x0400000>;
- };
-
- ubi@1740000 {
- label = "ubi";
- reg = <0x1740000 0x1600000>;
- };
-
- netgear@2d40000 {
- label = "netgear";
- reg = <0x2d40000 0x0c00000>;
- read-only;
- };
-
- reserve@3940000 {
- label = "reserve";
- reg = <0x3940000 0x46c0000>;
- read-only;
- };
- };
- };
- };
-
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
- };
-
- gmac1: ethernet@37200000 {
- status = "ok";
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- mtd-mac-address = <&art 6>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- gmac2: ethernet@37400000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- mtd-mac-address = <&art 0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- usb1 {
- label = "r7500:white:usb1";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb2 {
- label = "r7500:white:usb2";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- power_amber: power_amber {
- label = "r7500:amber:power";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- wan_white {
- label = "r7500:white:wan";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- wan_amber {
- label = "r7500:amber:wan";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "r7500:white:wps";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
-
- esata {
- label = "r7500:white:esata";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
-
- power_white: power_white {
- label = "r7500:white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- wifi {
- label = "r7500:white:wifi";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&tcsr {
- qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
- compatible = "qcom,tcsr";
-};
-
-&adm_dma {
- status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
deleted file mode 100644
index faec8b35ae..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
+++ /dev/null
@@ -1,407 +0,0 @@
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Netgear Nighthawk X4 R7500v2";
- compatible = "netgear,r7500v2", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
-
- rsvd@5fe00000 {
- reg = <0x5fe00000 0x200000>;
- reusable;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
- mdio-gpio0 = &mdio0;
-
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- chosen {
- bootargs = "rootfstype=squashfs noinitrd";
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- pinmux@800000 {
- button_pins: button_pins {
- mux {
- pins = "gpio6", "gpio54", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- i2c4_pins: i2c4_pinmux {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
- "gpio24","gpio26", "gpio53", "gpio64";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- mux {
- pins = "gpio34", "gpio35", "gpio36",
- "gpio37", "gpio38", "gpio39",
- "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- function = "nand";
- drive-strength = <10>;
- bias-disable;
- };
- pullups {
- pins = "gpio39";
- bias-pull-up;
- };
- hold {
- pins = "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- bias-bus-hold;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- usb0_pwr_en_pins: usb0_pwr_en_pins {
- mux {
- pins = "gpio15";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-high;
- };
- };
-
- usb1_pwr_en_pins: usb1_pwr_en_pins {
- mux {
- pins = "gpio16", "gpio68";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-high;
- };
- };
- };
-
- gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
- status = "ok";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
- };
-
- sata-phy@1b400000 {
- status = "ok";
- };
-
- sata@29000000 {
- status = "ok";
- };
-
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "ok";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "ok";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "ok";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "ok";
- };
-
- usb30@0 {
- status = "ok";
-
- pinctrl-0 = <&usb0_pwr_en_pins>;
- pinctrl-names = "default";
- };
-
- usb30@1 {
- status = "ok";
-
- pinctrl-0 = <&usb1_pwr_en_pins>;
- pinctrl-names = "default";
- };
-
- pcie0: pci@1b500000 {
- status = "ok";
- reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-names = "default";
- };
-
- pcie1: pci@1b700000 {
- status = "ok";
- reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&pcie1_pins>;
- pinctrl-names = "default";
- force_gen1 = <1>;
- };
-
- nand@1ac00000 {
- status = "ok";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- cs0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- qcadata@0 {
- label = "qcadata";
- reg = <0x0000000 0x0c80000>;
- read-only;
- };
-
- APPSBL@c80000 {
- label = "APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
-
- APPSBLENV@1180000 {
- label = "APPSBLENV";
- reg = <0x1180000 0x0080000>;
- read-only;
- };
-
- art: art@1200000 {
- label = "art";
- reg = <0x1200000 0x0140000>;
- read-only;
- };
-
- artbak: art@1340000 {
- label = "artbak";
- reg = <0x1340000 0x0140000>;
- read-only;
- };
-
- kernel@1480000 {
- label = "kernel";
- reg = <0x1480000 0x0400000>;
- };
-
- ubi@1880000 {
- label = "ubi";
- reg = <0x1880000 0x6080000>;
- };
-
- reserve@7900000 {
- label = "reserve";
- reg = <0x7900000 0x0700000>;
- read-only;
- };
- };
- };
- };
-
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0xaa545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
- };
-
- gmac1: ethernet@37200000 {
- status = "ok";
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- mtd-mac-address = <&art 6>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- gmac2: ethernet@37400000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- mtd-mac-address = <&art 0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- usb1 {
- label = "r7500v2:amber:usb1";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb3 {
- label = "r7500v2:amber:usb3";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- status {
- label = "r7500v2:amber:status";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- internet {
- label = "r7500v2:white:internet";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- label = "r7500v2:white:wan";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "r7500v2:white:wps";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
-
- esata {
- label = "r7500v2:white:esata";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
-
- power: power {
- label = "r7500v2:white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- wifi {
- label = "r7500v2:white:wifi";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&adm_dma {
- status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
deleted file mode 100644
index 8c522a897d..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
+++ /dev/null
@@ -1,30 +0,0 @@
-#include "qcom-ipq8064-v1.0.dtsi"
-
-/ {
- soc: soc {
-
- ss_phy_0: phy@110f8830 {
- rx_eq = <2>;
- tx_deamp_3_5db = <32>;
- mpll = <0xa0>;
- };
-
- ss_phy_1: phy@100f8830 {
- rx_eq = <2>;
- tx_deamp_3_5db = <32>;
- mpll = <0xa0>;
- };
-
- pcie0: pci@1b500000 {
- phy-tx0-term-offset = <0>;
- };
-
- pcie1: pci@1b700000 {
- phy-tx0-term-offset = <0>;
- };
-
- pcie2: pci@1b900000 {
- phy-tx0-term-offset = <0>;
- };
- };
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
deleted file mode 100644
index 2c224016b6..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
+++ /dev/null
@@ -1,417 +0,0 @@
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "TP-Link Archer VR2600v";
- compatible = "tplink,vr2600v", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
- mdio-gpio0 = &mdio0;
-
- led-boot = &power;
- led-failsafe = &general;
- led-running = &power;
- led-upgrade = &general;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- pinmux@800000 {
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio17",
- "gpio26", "gpio53", "gpio56", "gpio66";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- i2c4_pins: i2c4_pinmux {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- button_pins: button_pins {
- mux {
- pins = "gpio54", "gpio64", "gpio65", "gpio67", "gpio68";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- bias-pull-down;
- };
-
- data {
- pins = "gpio18", "gpio19";
- drive-strength = <10>;
- };
-
- cs {
- pins = "gpio20";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio21";
- drive-strength = <12>;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
- };
- };
-
- gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
- status = "ok";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
- };
-
- gsbi5: gsbi@1a200000 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "ok";
-
- spi4: spi@1a280000 {
- status = "ok";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash: W25Q128@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- MIBIB@20000 {
- label = "MIBIB";
- reg = <0x20000 0x20000>;
- read-only;
- };
-
- SBL2@40000 {
- label = "SBL2";
- reg = <0x40000 0x40000>;
- read-only;
- };
-
- SBL3@80000 {
- label = "SBL3";
- reg = <0x80000 0x80000>;
- read-only;
- };
-
- DDRCONFIG@100000 {
- label = "DDRCONFIG";
- reg = <0x100000 0x10000>;
- read-only;
- };
-
- SSD@110000 {
- label = "SSD";
- reg = <0x110000 0x10000>;
- read-only;
- };
-
- TZ@120000 {
- label = "TZ";
- reg = <0x120000 0x80000>;
- read-only;
- };
-
- RPM@1a0000 {
- label = "RPM";
- reg = <0x1a0000 0x80000>;
- read-only;
- };
-
- APPSBL@220000 {
- label = "APPSBL";
- reg = <0x220000 0x80000>;
- read-only;
- };
-
- APPSBLENV@2a0000 {
- label = "APPSBLENV";
- reg = <0x2a0000 0x40000>;
- read-only;
- };
-
- OLDART@2e0000 {
- label = "OLDART";
- reg = <0x2e0000 0x40000>;
- read-only;
- };
-
- kernel@320000 {
- label = "kernel";
- reg = <0x320000 0x300000>;
- };
-
- rootfs@620000 {
- label = "rootfs";
- reg = <0x620000 0x960000>;
- };
-
- defaultmac: default-mac@0xfaf100 {
- label = "default-mac";
- reg = <0xfaf100 0x00200>;
- read-only;
- };
-
- ART@fc0000 {
- label = "ART";
- reg = <0xfc0000 0x40000>;
- read-only;
- };
- };
- };
- };
-
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "ok";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "ok";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "ok";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "ok";
- };
-
- usb30@0 {
- status = "ok";
- };
-
- usb30@1 {
- status = "ok";
- };
-
- pcie0: pci@1b500000 {
- status = "ok";
- };
-
- pcie1: pci@1b700000 {
- status = "ok";
- force_gen1 = <1>;
- };
-
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- };
- };
-
- gmac1: ethernet@37200000 {
- status = "ok";
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- mtd-mac-address = <&defaultmac 0>;
- mtd-mac-address-increment = <1>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- gmac2: ethernet@37400000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- mtd-mac-address = <&defaultmac 0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- dect {
- label = "dect";
- gpios = <&qcom_pinmux 67 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_PHONE>;
- };
-
- ledswitch {
- label = "ledswitch";
- gpios = <&qcom_pinmux 68 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_LIGHTS_TOGGLE>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- dsl {
- label = "vr2600v:white:dsl";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb {
- label = "vr2600v:white:usb";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- lan {
- label = "vr2600v:white:lan";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g {
- label = "vr2600v:white:wlan2g";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g {
- label = "vr2600v:white:wlan5g";
- gpios = <&qcom_pinmux 17 GPIO_ACTIVE_HIGH>;
- };
-
- power: power {
- label = "vr2600v:white:power";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- phone {
- label = "vr2600v:white:phone";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- };
-
- wan {
- label = "vr2600v:white:wan";
- gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
- };
-
- general: general {
- label = "vr2600v:white:general";
- gpios = <&qcom_pinmux 66 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&adm_dma {
- status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
deleted file mode 100644
index e2a481723b..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
+++ /dev/null
@@ -1,442 +0,0 @@
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "NEC Aterm WG2600HP";
- compatible = "nec,wg2600hp", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
- mdio-gpio0 = &mdio0;
-
- led-boot = &power_green;
- led-failsafe = &power_red;
- led-running = &power_green;
- led-upgrade = &power_green;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x06000000 /* PAD0_MODE */
- 0x0000c 0x00080080 /* PAD6_MODE */
- 0x000e4 0x0006a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x0000004e /* PORT0_STATUS */
- 0x00094 0x0000004e /* PORT6_STATUS */
- >;
- };
-
- ethernet-phy@4 {
- reg = <4>;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- bridge {
- label = "bridge";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
-
- converter {
- label = "converter";
- gpios = <&qcom_pinmux 25 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- linux,input-type = <EV_SW>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- converter_green {
- label = "wg2600hp:green:converter";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_HIGH>;
- };
-
- power_red: power_red {
- label = "wg2600hp:red:power";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- active_green {
- label = "wg2600hp:green:active";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- active_red {
- label = "wg2600hp:red:active";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- power_green: power_green {
- label = "wg2600hp:green:power";
- gpios = <&qcom_pinmux 14 GPIO_ACTIVE_HIGH>;
- };
-
- converter_red {
- label = "wg2600hp:red:converter";
- gpios = <&qcom_pinmux 15 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g_green {
- label = "wg2600hp:green:wlan2g";
- gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
- };
-
- wlan2g_red {
- label = "wg2600hp:red:wlan2g";
- gpios = <&qcom_pinmux 56 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g_green {
- label = "wg2600hp:green:wlan5g";
- gpios = <&qcom_pinmux 57 GPIO_ACTIVE_HIGH>;
- };
-
- wlan5g_red {
- label = "wg2600hp:red:wlan5g";
- gpios = <&qcom_pinmux 58 GPIO_ACTIVE_HIGH>;
- };
-
- tv_green {
- label = "wg2600hp:green:tv";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
-
- tv_red {
- label = "wg2600hp:red:tv";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&gmac1 {
- status = "okay";
-
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- mtd-mac-address = <&PRODUCTDATA 6>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
-
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- mtd-mac-address = <&PRODUCTDATA 0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gsbi4 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C_UART>;
-};
-
-&gsbi4_serial {
- status = "okay";
-};
-
-&gsbi5 {
- status = "okay";
-
- qcom,mode = <GSBI_PROT_SPI>;
-
- spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0 0x20000>;
- read-only;
- };
-
- MIBIB@20000 {
- label = "MIBIB";
- reg = <0x20000 0x20000>;
- read-only;
- };
-
- SBL2@40000 {
- label = "SBL2";
- reg = <0x40000 0x40000>;
- read-only;
- };
-
- SBL3@80000 {
- label = "SBL3";
- reg = <0x80000 0x80000>;
- read-only;
- };
-
- DDRCONFIG@100000 {
- label = "DDRCONFIG";
- reg = <0x100000 0x10000>;
- read-only;
- };
-
- SSD@110000 {
- label = "SSD";
- reg = <0x110000 0x10000>;
- read-only;
- };
-
- TZ@120000 {
- label = "TZ";
- reg = <0x120000 0x80000>;
- read-only;
- };
-
- RPM@1a0000 {
- label = "RPM";
- reg = <0x1a0000 0x80000>;
- read-only;
- };
-
- APPSBL@220000 {
- label = "APPSBL";
- reg = <0x220000 0x80000>;
- read-only;
- };
-
- APPSBLENV@2a0000 {
- label = "APPSBLENV";
- reg = <0x2a0000 0x10000>;
- };
-
- PRODUCTDATA: PRODUCTDATA@2b0000 {
- label = "PRODUCTDATA";
- reg = <0x2b0000 0x30000>;
- read-only;
- };
-
- ART@2e0000 {
- label = "ART";
- reg = <0x2e0000 0x40000>;
- read-only;
- };
-
- TP@320000 {
- label = "TP";
- reg = <0x320000 0x40000>;
- read-only;
- };
-
- TINY@360000 {
- label = "TINY";
- reg = <0x360000 0x500000>;
- read-only;
- };
-
- firmware@860000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x860000 0x17a0000>;
- };
- };
- };
- };
-};
-
-&hs_phy_0 { /* USB3 port 0 HS phy */
- status = "okay";
-};
-
-&ss_phy_0 { /* USB3 port 0 SS phy */
- status = "okay";
-};
-
-&hs_phy_1 { /* USB3 port 1 HS phy */
- status = "okay";
-};
-
-&ss_phy_1 { /* USB3 port 1 SS phy */
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
-
- pinctrl-0 = <&usb_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
- force_gen1 = <1>;
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio16", "gpio54", "gpio24", "gpio25";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- i2c4_pins: i2c4_pinmux {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio6", "gpio7", "gpio8", "gpio9", "gpio14",
- "gpio15", "gpio55", "gpio56", "gpio57", "gpio58",
- "gpio64", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- bias-pull-down;
- };
-
- data {
- pins = "gpio18", "gpio19";
- drive-strength = <10>;
- };
-
- cs {
- pins = "gpio20";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio21";
- drive-strength = <12>;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- usb_pwr_en_pins: usb_pwr_en_pins {
- mux {
- pins = "gpio22";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- output-high;
- };
- };
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
deleted file mode 100644
index 14258d594e..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
+++ /dev/null
@@ -1,568 +0,0 @@
-/*
- * BSD LICENSE
- *
- * Copyright (C) 2017 Christian Mehlis <christian@m3hlis.de>
- * Copyright (C) 2018 Mathias Kresin <dev@kresin.me>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. Neither the names of the copyright holders nor the names of any
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include "qcom-ipq8064-v1.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
- compatible = "compex,wpq864", "qcom,ipq8064";
- model = "Compex WPQ864";
-
- aliases {
- mdio-gpio0 = &mdio0;
- serial0 = &gsbi4_serial;
- ethernet0 = &gmac1;
- ethernet1 = &gmac0;
-
- led-boot = &led_pass;
- led-failsafe = &led_fail;
- led-running = &led_pass;
- led-upgrade = &led_pass;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- rpm@108000 {
- pinctrl-0 = <&rpm_pins>;
- pinctrl-names = "default";
- };
-
- nand@1ac00000 {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- mt29f2g08abbeah4@0 {
- compatible = "qcom,nandcs";
-
- reg = <0>;
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0000000 0x0040000>;
- read-only;
- };
-
- MIBIB@40000 {
- label = "MIBIB";
- reg = <0x0040000 0x0140000>;
- read-only;
- };
-
- SBL2@180000 {
- label = "SBL2";
- reg = <0x0180000 0x0140000>;
- read-only;
- };
-
- SBL3@2c0000 {
- label = "SBL3";
- reg = <0x02c0000 0x0280000>;
- read-only;
- };
-
- DDRCONFIG@540000 {
- label = "DDRCONFIG";
- reg = <0x0540000 0x0120000>;
- read-only;
- };
-
- SSD@660000 {
- label = "SSD";
- reg = <0x0660000 0x0120000>;
- read-only;
- };
-
- TZ@780000 {
- label = "TZ";
- reg = <0x0780000 0x0280000>;
- read-only;
- };
-
- RPM@a00000 {
- label = "RPM";
- reg = <0x0a00000 0x0280000>;
- read-only;
- };
-
- APPSBL@c80000 {
- label = "APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
-
- APPSBLENV@1180000 {
- label = "APPSBLENV";
- reg = <0x1180000 0x0080000>;
- };
-
- ART@1200000 {
- label = "ART";
- reg = <0x1200000 0x0140000>;
- };
-
- ubi@1340000 {
- label = "ubi";
- reg = <0x1340000 0x4000000>;
- };
-
- BOOTCONFIG@5340000 {
- label = "BOOTCONFIG";
- reg = <0x5340000 0x0060000>;
- };
-
- SBL2-1@53a0000- {
- label = "SBL2_1";
- reg = <0x53a0000 0x0140000>;
- read-only;
- };
-
- SBL3-1@54e0000 {
- label = "SBL3_1";
- reg = <0x54e0000 0x0280000>;
- read-only;
- };
-
- DDRCONFIG-1@5760000 {
- label = "DDRCONFIG_1";
- reg = <0x5760000 0x0120000>;
- read-only;
- };
-
- SSD-1@5880000 {
- label = "SSD_1";
- reg = <0x5880000 0x0120000>;
- read-only;
- };
-
- TZ-1@59a0000 {
- label = "TZ_1";
- reg = <0x59a0000 0x0280000>;
- read-only;
- };
-
- RPM-1@5c20000 {
- label = "RPM_1";
- reg = <0x5c20000 0x0280000>;
- read-only;
- };
-
- BOOTCONFIG1@5ea0000 {
- label = "BOOTCONFIG1";
- reg = <0x5ea0000 0x0060000>;
- };
-
- APPSBL-1@5f00000 {
- label = "APPSBL_1";
- reg = <0x5f00000 0x0500000>;
- read-only;
- };
-
- ubi-1@6400000 {
- label = "ubi_1";
- reg = <0x6400000 0x4000000>;
- };
-
- unused@a400000 {
- label = "unused";
- reg = <0xa400000 0x5c00000>;
- };
- };
- };
- };
- };
-
- mdio0: mdio {
- #address-cells = <1>;
- #size-cells = <0>;
-
- compatible = "virtual,mdio-gpio";
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
-
- ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- >;
- };
-
- ethernet-phy@4 {
- reg = <4>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
-
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- rss4 {
- label = "wpq864:green:rss4";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- rss3 {
- label = "wpq864:green:rss3";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- rss2 {
- label = "wpq864:orange:rss2";
- gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
- };
-
- rss1 {
- label = "wpq864:red:rss1";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- led_pass: pass {
- label = "wpq864:green:pass";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- };
-
- led_fail: fail {
- label = "wpq864:green:fail";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- usb {
- label = "wpq864:green:usb";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb-pcie {
- label = "wpq864:green:usb-pcie";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
-
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
- };
-
- beeper {
- compatible = "gpio-beeper";
-
- pinctrl-0 = <&beeper_pins>;
- pinctrl-names = "default";
-
- gpios = <&qcom_pinmux 55 GPIO_ACTIVE_HIGH>;
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&gmac1 {
- status = "okay";
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "okay";
-
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gsbi4 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C_UART>;
-};
-
-&gsbi4_serial {
- status = "okay";
-
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-&gsbi5 {
- status = "okay";
-
- qcom,mode = <GSBI_PROT_SPI>;
-
- spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- s25fl256s1@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
- };
-};
-
-&hs_phy_0 { /* USB3 port 0 HS phy */
- status = "okay";
-};
-
-&hs_phy_1 { /* USB3 port 1 HS phy */
- status = "okay";
-};
-
-&ss_phy_0 { /* USB3 port 0 SS phy */
- status = "okay";
-
- rx_eq = <2>;
- tx_deamp_3_5db = <32>;
- mpll = <160>;
-};
-
-&ss_phy_1 { /* USB3 port 1 SS phy */
- status = "okay";
-
- rx_eq = <2>;
- tx_deamp_3_5db = <32>;
- mpll = <160>;
-};
-
-&pcie0 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- /delete-property/ perst-gpios;
-};
-
-&pcie1 {
- status = "okay";
-};
-
-&pcie2 {
- status = "okay";
-
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
- /delete-property/ perst-gpios;
-};
-
-&qcom_pinmux {
- pinctrl-names = "default";
- pinctrl-0 = <&state_default>;
-
- state_default: pinctrl0 {
- pcie0_pcie2_perst {
- pins = "gpio3";
- function = "gpio";
- drive-strength = <2>;
- bias-disable;
- output-high;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio22",
- "gpio23", "gpio24", "gpio25", "gpio53";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- button_pins: button_pins {
- mux {
- pins = "gpio54";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- beeper_pins: beeper_pins {
- mux {
- pins = "gpio55";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- rpm_pins: rpm_pins {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- drive-strength = <10>;
- bias-disable;
- };
- };
-
- uart0_pins: uart0_pins {
- mux {
- pins = "gpio10", "gpio11";
- function = "gsbi4";
- drive-strength = <10>;
- bias-disable;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19";
- function = "gsbi5";
- drive-strength = <10>;
- bias-pull-down;
- };
-
- clk {
- pins = "gpio21";
- function = "gsbi5";
- drive-strength = <12>;
- bias-pull-down;
- };
-
- cs {
- pins = "gpio20";
- function = "gpio";
- drive-strength = <10>;
- bias-pull-up;
- };
- };
-
- nand_pins: nand_pins {
- mux {
- pins = "gpio34", "gpio35", "gpio36", "gpio37",
- "gpio38", "gpio39", "gpio40", "gpio41",
- "gpio42", "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- function = "nand";
- drive-strength = <10>;
- bias-disable;
- };
-
- pullups {
- pins = "gpio39";
- bias-pull-up;
- };
-
- hold {
- pins = "gpio40", "gpio41", "gpio42", "gpio43",
- "gpio44", "gpio45", "gpio46", "gpio47";
- bias-bus-hold;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30",
- "gpio31", "gpio32", "gpio51", "gpio52",
- "gpio59", "gpio60", "gpio61", "gpio62";
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
- };
-};
-
-&usb3_0 {
- status = "okay";
-};
-
-
-&usb3_1 {
- status = "okay";
-};
-
-&tcsr {
- qcom,usb-ctrl-select = <TCSR_USB_SELECT_USB3_DUAL>;
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
deleted file mode 100644
index 7b5ee799ee..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
+++ /dev/null
@@ -1,535 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "qcom-ipq8064-v2.0.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Buffalo WXR-2533DHP";
- compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
-
- memory@42000000 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
-
- led-boot = &power;
- led-failsafe = &diag;
- led-running = &power;
- led-upgrade = &power;
- };
-
- chosen {
- /* use "ubi_rootfs" volume in "ubi" partition as rootfs */
- bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- nand@1ac00000 {
- status = "okay";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- cs@0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- ubi@0 {
- label = "ubi";
- reg = <0x0000000 0x4000000>;
- };
-
- rootfs_1@4000000 {
- label = "rootfs_1";
- reg = <0x4000000 0x4000000>;
- };
- };
- };
- };
-
- mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
- <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x07600000 /* PAD0_MODE */
- 0x00008 0x01000000 /* PAD5_MODE */
- 0x0000c 0x00000080 /* PAD6_MODE */
- 0x00050 0xcc35cc35 /* LED_CTRL0 */
- 0x00054 0xca35ca35 /* LED_CTRL1 */
- 0x00058 0xc935c935 /* LED_CTRL2 */
- 0x0005c 0x03ffff00 /* LED_CTRL3 */
- 0x000e4 0x0006a545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x0000007e /* PORT0_STATUS */
- 0x00094 0x0000007e /* PORT6_STATUS */
- >;
- };
-
- ethernet-phy@4 {
- reg = <4>;
- };
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- usb {
- label = "wxr-2533dhp:green:usb";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "usbport";
- trigger-sources = <&hub_port0 &hub_port1>;
- };
-
- guestport {
- label = "wxr-2533dhp:green:guestport";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- diag: diag {
- label = "wxr-2533dhp:orange:diag";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- internet_orange {
- label = "wxr-2533dhp:orange:internet";
- gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
- };
-
- internet_white {
- label = "wxr-2533dhp:white:internet";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- wireless_orange {
- label = "wxr-2533dhp:orange:wireless";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- wireless_white {
- label = "wxr-2533dhp:white:wireless";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
-
- router_orange {
- label = "wxr-2533dhp:orange:router";
- gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
- };
-
- router_white {
- label = "wxr-2533dhp:white:router";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
- };
-
- power: power {
- label = "wxr-2533dhp:white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- power {
- label = "power";
- gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_POWER>;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- eject {
- label = "eject";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_EJECTCD>;
- };
-
- guest {
- label = "guest";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_0>;
- };
-
- ap {
- label = "ap";
- gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- };
-
- router {
- label = "router";
- gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- };
-
- auto {
- label = "auto";
- gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>;
- linux,code = <BTN_1>;
- linux,input-type = <EV_SW>;
- };
- };
-};
-
-&adm_dma {
- status = "okay";
-};
-
-&gmac1 {
- status = "okay";
-
- phy-mode = "rgmii";
- qcom,id = <1>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- mtd-mac-address = <&ART 6>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gmac2 {
- status = "ok";
-
- phy-mode = "sgmii";
- qcom,id = <2>;
-
- mtd-mac-address = <&ART 0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-&gsbi4 {
- status = "okay";
- qcom,mode = <GSBI_PROT_I2C_UART>;
-};
-
-&gsbi4_serial {
- status = "okay";
-
- pinctrl-0 = <&uart0_pins>;
- pinctrl-names = "default";
-};
-
-&gsbi5 {
- status = "okay";
- qcom,mode = <GSBI_PROT_SPI>;
-
- spi@1a280000 {
- status = "okay";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- spi-max-frequency = <50000000>;
- reg = <0>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- SBL1@0 {
- label = "SBL1";
- reg = <0x0 0x10000>;
- read-only;
- };
-
- MIBIB@10000 {
- label = "MIBIB";
- reg = <0x10000 0x20000>;
- read-only;
- };
-
- SBL2@30000 {
- label = "SBL2";
- reg = <0x30000 0x30000>;
- read-only;
- };
-
- SBL3@60000 {
- label = "SBL3";
- reg = <0x60000 0x30000>;
- read-only;
- };
-
- DDRCONFIG@90000 {
- label = "DDRCONFIG";
- reg = <0x90000 0x10000>;
- read-only;
- };
-
- SSD@a0000 {
- label = "SSD";
- reg = <0xa0000 0x10000>;
- read-only;
- };
-
- TZ@b0000 {
- label = "TZ";
- reg = <0xb0000 0x30000>;
- read-only;
- };
-
- RPM@e0000 {
- label = "RPM";
- reg = <0xe0000 0x20000>;
- read-only;
- };
-
- APPSBL@100000 {
- label = "APPSBL";
- reg = <0x100000 0x70000>;
- read-only;
- };
-
- APPSBLENV@170000 {
- label = "APPSBLENV";
- reg = <0x170000 0x10000>;
- read-only;
- };
-
- ART: ART@180000 {
- label = "ART";
- reg = <0x180000 0x40000>;
- read-only;
- };
-
- BOOTCONFIG@1c0000 {
- label = "BOOTCONFIG";
- reg = <0x1c0000 0x10000>;
- read-only;
- };
-
- APPSBL_1@1d0000 {
- label = "APPSBL_1";
- reg = <0x1d0000 0x70000>;
- read-only;
- };
- };
- };
- };
-};
-
-&hs_phy_0 { /* USB3 port 0 HS phy */
- status = "okay";
-};
-
-&ss_phy_0 { /* USB3 port 0 SS phy */
- status = "okay";
-};
-
-&hs_phy_1 { /* USB3 port 1 HS phy */
- status = "okay";
-};
-
-&ss_phy_1 { /* USB3 port 1 SS phy */
- status = "okay";
-};
-
-&usb3_0 {
- status = "okay";
-
- pinctrl-0 = <&usb_pwr_en_pins>;
- pinctrl-names = "default";
-};
-
-&usb3_1 {
- status = "okay";
-};
-
-&dwc3_0 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port0: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&dwc3_1 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub_port1: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&pcie0 {
- status = "okay";
-};
-
-&pcie1 {
- status = "okay";
- force_gen1 = <1>;
-};
-
-&qcom_pinmux {
- button_pins: button_pins {
- mux {
- pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57",
- "gpio58", "gpio64", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22",
- "gpio23", "gpio24", "gpio25", "gpio26", "gpio53";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- uart0_pins: uart0_pins {
- mux {
- pins = "gpio10", "gpio11";
- function = "gsbi4";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- bias-pull-down;
- };
-
- data {
- pins = "gpio18", "gpio19";
- drive-strength = <10>;
- };
-
- cs{
- pins = "gpio20";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio21";
- drive-strength = <12>;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- nand_pins: nand_pins {
- mux {
- pins = "gpio34", "gpio35", "gpio36",
- "gpio37", "gpio38", "gpio39",
- "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- function = "nand";
- drive-strength = <10>;
- bias-disable;
- };
-
- pullups {
- pins = "gpio39";
- bias-pull-up;
- };
-
- hold {
- pins = "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- bias-bus-hold;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
- usb_pwr_en_pins: usb_pwr_en_pins {
- mux{
- pins = "gpio68";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- output-high;
- };
- };
-}; \ No newline at end of file
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi
deleted file mode 100644
index 8387460d27..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ /dev/null
@@ -1,1410 +0,0 @@
-/dts-v1/;
-
-#include "skeleton.dtsi"
-#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
- model = "Qualcomm IPQ8064";
- compatible = "qcom,ipq8064";
- interrupt-parent = <&intc>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu0: cpu@0 {
- compatible = "qcom,krait";
- enable-method = "qcom,kpss-acc-v1";
- device_type = "cpu";
- reg = <0>;
- next-level-cache = <&L2>;
- qcom,acc = <&acc0>;
- qcom,saw = <&saw0>;
- clocks = <&kraitcc 0>, <&kraitcc 4>;
- clock-names = "cpu", "l2";
- clock-latency = <100000>;
- cpu-supply = <&smb208_s2a>;
- voltage-tolerance = <5>;
- cooling-min-state = <0>;
- cooling-max-state = <10>;
- #cooling-cells = <2>;
- cpu-idle-states = <&CPU_SPC>;
- };
-
- cpu1: cpu@1 {
- compatible = "qcom,krait";
- enable-method = "qcom,kpss-acc-v1";
- device_type = "cpu";
- reg = <1>;
- next-level-cache = <&L2>;
- qcom,acc = <&acc1>;
- qcom,saw = <&saw1>;
- clocks = <&kraitcc 1>, <&kraitcc 4>;
- clock-names = "cpu", "l2";
- clock-latency = <100000>;
- cpu-supply = <&smb208_s2b>;
- cooling-min-state = <0>;
- cooling-max-state = <10>;
- #cooling-cells = <2>;
- cpu-idle-states = <&CPU_SPC>;
- };
-
- L2: l2-cache {
- compatible = "cache";
- cache-level = <2>;
- qcom,saw = <&saw_l2>;
- };
-
- qcom,l2 {
- qcom,l2-rates = <384000000 1000000000 1200000000>;
- };
-
- idle-states {
- CPU_SPC: spc {
- compatible = "qcom,idle-state-spc",
- "arm,idle-state";
- entry-latency-us = <400>;
- exit-latency-us = <900>;
- min-residency-us = <3000>;
- };
- };
- };
-
- thermal-zones {
- tsens_tz_sensor0 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tsens 0>;
-
- trips {
- cpu-critical-hi {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical_high";
- };
-
- cpu-config-hi {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "configurable_hi";
- };
-
- cpu-config-lo {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "configurable_lo";
- };
-
- cpu-critical-low {
- temperature = <0>;
- hysteresis = <2000>;
- type = "critical_low";
- };
- };
- };
-
- tsens_tz_sensor1 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tsens 1>;
-
- trips {
- cpu-critical-hi {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical_high";
- };
-
- cpu-config-hi {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "configurable_hi";
- };
-
- cpu-config-lo {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "configurable_lo";
- };
-
- cpu-critical-low {
- temperature = <0>;
- hysteresis = <2000>;
- type = "critical_low";
- };
- };
- };
-
- tsens_tz_sensor2 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tsens 2>;
-
- trips {
- cpu-critical-hi {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical_high";
- };
-
- cpu-config-hi {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "configurable_hi";
- };
-
- cpu-config-lo {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "configurable_lo";
- };
-
- cpu-critical-low {
- temperature = <0>;
- hysteresis = <2000>;
- type = "critical_low";
- };
- };
- };
-
- tsens_tz_sensor3 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tsens 3>;
-
- trips {
- cpu-critical-hi {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical_high";
- };
-
- cpu-config-hi {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "configurable_hi";
- };
-
- cpu-config-lo {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "configurable_lo";
- };
-
- cpu-critical-low {
- temperature = <0>;
- hysteresis = <2000>;
- type = "critical_low";
- };
- };
- };
-
- tsens_tz_sensor4 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tsens 4>;
-
- trips {
- cpu-critical-hi {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical_high";
- };
-
- cpu-config-hi {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "configurable_hi";
- };
-
- cpu-config-lo {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "configurable_lo";
- };
-
- cpu-critical-low {
- temperature = <0>;
- hysteresis = <2000>;
- type = "critical_low";
- };
- };
- };
-
- tsens_tz_sensor5 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tsens 5>;
-
- trips {
- cpu-critical-hi {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical_high";
- };
-
- cpu-config-hi {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "configurable_hi";
- };
-
- cpu-config-lo {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "configurable_lo";
- };
-
- cpu-critical-low {
- temperature = <0>;
- hysteresis = <2000>;
- type = "critical_low";
- };
- };
- };
-
- tsens_tz_sensor6 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tsens 6>;
-
- trips {
- cpu-critical-hi {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical_high";
- };
-
- cpu-config-hi {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "configurable_hi";
- };
-
- cpu-config-lo {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "configurable_lo";
- };
-
- cpu-critical-low {
- temperature = <0>;
- hysteresis = <2000>;
- type = "critical_low";
- };
- };
- };
-
- tsens_tz_sensor7 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tsens 7>;
-
- trips {
- cpu-critical-hi {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical_high";
- };
-
- cpu-config-hi {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "configurable_hi";
- };
-
- cpu-config-lo {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "configurable_lo";
- };
-
- cpu-critical-low {
- temperature = <0>;
- hysteresis = <2000>;
- type = "critical_low";
- };
- };
- };
-
- tsens_tz_sensor8 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tsens 8>;
-
- trips {
- cpu-critical-hi {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical_high";
- };
-
- cpu-config-hi {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "configurable_hi";
- };
-
- cpu-config-lo {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "configurable_lo";
- };
-
- cpu-critical-low {
- temperature = <0>;
- hysteresis = <2000>;
- type = "critical_low";
- };
- };
- };
-
- tsens_tz_sensor9 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tsens 9>;
-
- trips {
- cpu-critical-hi {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical_high";
- };
-
- cpu-config-hi {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "configurable_hi";
- };
-
- cpu-config-lo {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "configurable_lo";
- };
-
- cpu-critical-low {
- temperature = <0>;
- hysteresis = <2000>;
- type = "critical_low";
- };
- };
- };
-
- tsens_tz_sensor10 {
- polling-delay-passive = <0>;
- polling-delay = <0>;
- thermal-sensors = <&tsens 10>;
-
- trips {
- cpu-critical-hi {
- temperature = <125000>;
- hysteresis = <2000>;
- type = "critical_high";
- };
-
- cpu-config-hi {
- temperature = <105000>;
- hysteresis = <2000>;
- type = "configurable_hi";
- };
-
- cpu-config-lo {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "configurable_lo";
- };
-
- cpu-critical-low {
- temperature = <0>;
- hysteresis = <2000>;
- type = "critical_low";
- };
- };
- };
- };
-
- cpu-pmu {
- compatible = "qcom,krait-pmu";
- interrupts = <1 10 0x304>;
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
-
- nss@40000000 {
- reg = <0x40000000 0x1000000>;
- no-map;
- };
-
- smem: smem@41000000 {
- reg = <0x41000000 0x200000>;
- no-map;
- };
- };
-
- clocks {
- cxo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- pxo_board {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <25000000>;
- };
-
- sleep_clk: sleep_clk {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- #clock-cells = <0>;
- };
- };
-
- firmware {
- scm {
- compatible = "qcom,scm-ipq806x";
- };
- };
-
- kraitcc: clock-controller {
- compatible = "qcom,krait-cc-v1";
- #clock-cells = <1>;
- };
-
- qcom,pvs {
- qcom,pvs-format-a;
- qcom,speed0-pvs0-bin-v0 =
- < 1400000000 1250000 >,
- < 1200000000 1200000 >,
- < 1000000000 1150000 >,
- < 800000000 1100000 >,
- < 600000000 1050000 >,
- < 384000000 1000000 >;
-
- qcom,speed0-pvs1-bin-v0 =
- < 1400000000 1175000 >,
- < 1200000000 1125000 >,
- < 1000000000 1075000 >,
- < 800000000 1025000 >,
- < 600000000 975000 >,
- < 384000000 925000 >;
-
- qcom,speed0-pvs2-bin-v0 =
- < 1400000000 1125000 >,
- < 1200000000 1075000 >,
- < 1000000000 1025000 >,
- < 800000000 995000 >,
- < 600000000 925000 >,
- < 384000000 875000 >;
-
- qcom,speed0-pvs3-bin-v0 =
- < 1400000000 1050000 >,
- < 1200000000 1000000 >,
- < 1000000000 950000 >,
- < 800000000 900000 >,
- < 600000000 850000 >,
- < 384000000 800000 >;
- };
-
- soc: soc {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- compatible = "simple-bus";
-
- lpass@28100000 {
- compatible = "qcom,lpass-cpu";
- status = "disabled";
- clocks = <&lcc AHBIX_CLK>,
- <&lcc MI2S_OSR_CLK>,
- <&lcc MI2S_BIT_CLK>;
- clock-names = "ahbix-clk",
- "mi2s-osr-clk",
- "mi2s-bit-clk";
- interrupts = <0 85 1>;
- interrupt-names = "lpass-irq-lpaif";
- reg = <0x28100000 0x10000>;
- reg-names = "lpass-lpaif";
- };
-
- qfprom: qfprom@700000 {
- compatible = "qcom,qfprom", "syscon";
- reg = <0x700000 0x1000>;
- #address-cells = <1>;
- #size-cells = <1>;
- status = "okay";
- tsens_calib: calib@400 {
- reg = <0x400 0x10>;
- };
- tsens_backup: backup@410 {
- reg = <0x410 0x10>;
- };
- };
-
- rpm@108000 {
- compatible = "qcom,rpm-ipq8064";
- reg = <0x108000 0x1000>;
- qcom,ipc = <&l2cc 0x8 2>;
-
- interrupts = <0 19 0>,
- <0 21 0>,
- <0 22 0>;
- interrupt-names = "ack",
- "err",
- "wakeup";
-
- clocks = <&gcc RPM_MSG_RAM_H_CLK>;
- clock-names = "ram";
-
- #address-cells = <1>;
- #size-cells = <0>;
-
- rpmcc: clock-controller {
- compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc";
- #clock-cells = <1>;
- };
-
- regulators {
- compatible = "qcom,rpm-smb208-regulators";
-
- smb208_s1a: s1a {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1150000>;
-
- qcom,switch-mode-frequency = <1200000>;
-
- };
-
- smb208_s1b: s1b {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1150000>;
-
- qcom,switch-mode-frequency = <1200000>;
- };
-
- smb208_s2a: s2a {
- regulator-min-microvolt = < 800000>;
- regulator-max-microvolt = <1250000>;
-
- qcom,switch-mode-frequency = <1200000>;
- };
-
- smb208_s2b: s2b {
- regulator-min-microvolt = < 800000>;
- regulator-max-microvolt = <1250000>;
-
- qcom,switch-mode-frequency = <1200000>;
- };
- };
- };
-
- rng@1a500000 {
- compatible = "qcom,prng";
- reg = <0x1a500000 0x200>;
- clocks = <&gcc PRNG_CLK>;
- clock-names = "core";
- };
-
- qcom_pinmux: pinmux@800000 {
- compatible = "qcom,ipq8064-pinctrl";
- reg = <0x800000 0x4000>;
-
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- interrupts = <0 16 0x4>;
-
- pcie0_pins: pcie0_pinmux {
- mux {
- pins = "gpio3";
- function = "pcie1_rst";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie1_pins: pcie1_pinmux {
- mux {
- pins = "gpio48";
- function = "pcie2_rst";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
- pcie2_pins: pcie2_pinmux {
- mux {
- pins = "gpio63";
- function = "pcie3_rst";
- drive-strength = <2>;
- bias-disable;
- output-low;
- };
- };
- };
-
- intc: interrupt-controller@2000000 {
- compatible = "qcom,msm-qgic2";
- interrupt-controller;
- #interrupt-cells = <3>;
- reg = <0x02000000 0x1000>,
- <0x02002000 0x1000>;
- };
-
- timer@200a000 {
- compatible = "qcom,kpss-timer", "qcom,msm-timer";
- interrupts = <1 1 0x301>,
- <1 2 0x301>,
- <1 3 0x301>,
- <1 4 0x301>,
- <1 5 0x301>;
- reg = <0x0200a000 0x100>;
- clock-frequency = <25000000>,
- <32768>;
- clocks = <&sleep_clk>;
- clock-names = "sleep";
- cpu-offset = <0x80000>;
- };
-
- acc0: clock-controller@2088000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
- clock-output-names = "acpu0_aux";
- };
-
- acc1: clock-controller@2098000 {
- compatible = "qcom,kpss-acc-v1";
- reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
- clock-output-names = "acpu1_aux";
- };
-
- l2cc: clock-controller@2011000 {
- compatible = "qcom,kpss-gcc", "syscon";
- reg = <0x2011000 0x1000>;
- clock-output-names = "acpu_l2_aux";
- };
-
- saw0: regulator@2089000 {
- compatible = "qcom,saw2", "syscon";
- reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
- regulator;
- };
-
- saw1: regulator@2099000 {
- compatible = "qcom,saw2", "syscon";
- reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
- regulator;
- };
-
- saw_l2: regulator@02012000 {
- compatible = "qcom,saw2", "syscon";
- reg = <0x02012000 0x1000>;
- regulator;
- };
-
- sic_non_secure: sic-non-secure@12100000 {
- compatible = "syscon";
- reg = <0x12100000 0x10000>;
- };
-
- gsbi2: gsbi@12480000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <2>;
- reg = <0x12480000 0x100>;
- clocks = <&gcc GSBI2_H_CLK>;
- clock-names = "iface";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- syscon-tcsr = <&tcsr>;
-
- uart2: serial@12490000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x12490000 0x1000>,
- <0x12480000 0x1000>;
- interrupts = <0 195 0x0>;
- clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- i2c@124a0000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x124a0000 0x1000>;
- interrupts = <0 196 0>;
-
- clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- };
-
- gsbi4: gsbi@16300000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <4>;
- reg = <0x16300000 0x100>;
- clocks = <&gcc GSBI4_H_CLK>;
- clock-names = "iface";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- syscon-tcsr = <&tcsr>;
-
- gsbi4_serial: serial@16340000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x16340000 0x1000>,
- <0x16300000 0x1000>;
- interrupts = <0 152 0x0>;
- clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- i2c@16380000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x16380000 0x1000>;
- interrupts = <0 153 0>;
-
- clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- gsbi5: gsbi@1a200000 {
- compatible = "qcom,gsbi-v1.0.0";
- cell-index = <5>;
- reg = <0x1a200000 0x100>;
- clocks = <&gcc GSBI5_H_CLK>;
- clock-names = "iface";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- status = "disabled";
-
- syscon-tcsr = <&tcsr>;
-
- uart5: serial@1a240000 {
- compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
- reg = <0x1a240000 0x1000>,
- <0x1a200000 0x1000>;
- interrupts = <0 154 0x0>;
- clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
- };
-
- i2c@1a280000 {
- compatible = "qcom,i2c-qup-v1.1.1";
- reg = <0x1a280000 0x1000>;
- interrupts = <0 155 0>;
-
- clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- spi@1a280000 {
- compatible = "qcom,spi-qup-v1.1.1";
- reg = <0x1a280000 0x1000>;
- interrupts = <0 155 0>;
-
- clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
- clock-names = "core", "iface";
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
-
- sata_phy: sata-phy@1b400000 {
- compatible = "qcom,ipq806x-sata-phy";
- reg = <0x1b400000 0x200>;
-
- clocks = <&gcc SATA_PHY_CFG_CLK>;
- clock-names = "cfg";
-
- #phy-cells = <0>;
- status = "disabled";
- };
-
- sata@29000000 {
- compatible = "qcom,ipq806x-ahci", "generic-ahci";
- reg = <0x29000000 0x180>;
-
- ports-implemented = <0x1>;
-
- interrupts = <0 209 0x0>;
-
- clocks = <&gcc SFAB_SATA_S_H_CLK>,
- <&gcc SATA_H_CLK>,
- <&gcc SATA_A_CLK>,
- <&gcc SATA_RXOOB_CLK>,
- <&gcc SATA_PMALIVE_CLK>;
- clock-names = "slave_face", "iface", "core",
- "rxoob", "pmalive";
-
- assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
- assigned-clock-rates = <100000000>, <100000000>;
-
- phys = <&sata_phy>;
- phy-names = "sata-phy";
- status = "disabled";
- };
-
- qcom,ssbi@500000 {
- compatible = "qcom,ssbi";
- reg = <0x00500000 0x1000>;
- qcom,controller-type = "pmic-arbiter";
- };
-
- gcc: clock-controller@900000 {
- compatible = "qcom,gcc-ipq8064";
- reg = <0x00900000 0x4000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- #power-domain-cells = <1>;
- };
-
- tsens: thermal-sensor@900000 {
- compatible = "qcom,ipq8064-tsens";
- reg = <0x900000 0x3680>;
- nvmem-cells = <&tsens_calib>, <&tsens_backup>;
- nvmem-cell-names = "calib", "calib_backup";
- interrupts = <0 178 0>;
- #thermal-sensor-cells = <1>;
- };
-
- tcsr: syscon@1a400000 {
- compatible = "qcom,tcsr-ipq8064", "syscon";
- reg = <0x1a400000 0x100>;
- };
-
- lcc: clock-controller@28000000 {
- compatible = "qcom,lcc-ipq8064";
- reg = <0x28000000 0x1000>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- };
-
- sfpb_mutex_block: syscon@1200600 {
- compatible = "syscon";
- reg = <0x01200600 0x100>;
- };
-
- hs_phy_1: phy@100f8800 {
- compatible = "qcom,dwc3-hs-usb-phy";
- reg = <0x100f8800 0x30>;
- clocks = <&gcc USB30_1_UTMI_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- ss_phy_1: phy@100f8830 {
- compatible = "qcom,dwc3-ss-usb-phy";
- reg = <0x100f8830 0x30>;
- clocks = <&gcc USB30_1_MASTER_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- hs_phy_0: phy@110f8800 {
- compatible = "qcom,dwc3-hs-usb-phy";
- reg = <0x110f8800 0x30>;
- clocks = <&gcc USB30_0_UTMI_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- ss_phy_0: phy@110f8830 {
- compatible = "qcom,dwc3-ss-usb-phy";
- reg = <0x110f8830 0x30>;
- clocks = <&gcc USB30_0_MASTER_CLK>;
- clock-names = "ref";
- #phy-cells = <0>;
-
- status = "disabled";
- };
-
- usb3_0: usb30@0 {
- compatible = "qcom,dwc3";
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&gcc USB30_0_MASTER_CLK>;
- clock-names = "core";
-
- ranges;
-
- resets = <&gcc USB30_0_MASTER_RESET>;
- reset-names = "usb30_0_mstr_rst";
-
- status = "disabled";
-
- dwc3_0: dwc3@11000000 {
- compatible = "snps,dwc3";
- reg = <0x11000000 0xcd00>;
- interrupts = <0 110 0x4>;
- phys = <&hs_phy_0>, <&ss_phy_0>;
- phy-names = "usb2-phy", "usb3-phy";
- dr_mode = "host";
- snps,dis_u3_susphy_quirk;
- };
- };
-
- usb3_1: usb30@1 {
- compatible = "qcom,dwc3";
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&gcc USB30_1_MASTER_CLK>;
- clock-names = "core";
-
- ranges;
-
- resets = <&gcc USB30_1_MASTER_RESET>;
- reset-names = "usb30_1_mstr_rst";
-
- status = "disabled";
-
- dwc3_1: dwc3@10000000 {
- compatible = "snps,dwc3";
- reg = <0x10000000 0xcd00>;
- interrupts = <0 205 0x4>;
- phys = <&hs_phy_1>, <&ss_phy_1>;
- phy-names = "usb2-phy", "usb3-phy";
- dr_mode = "host";
- snps,dis_u3_susphy_quirk;
- };
- };
-
- pcie0: pci@1b500000 {
- compatible = "qcom,pcie-ipq8064";
- reg = <0x1b500000 0x1000
- 0x1b502000 0x80
- 0x1b600000 0x100
- 0x0ff00000 0x100000>;
- reg-names = "dbi", "elbi", "parf", "config";
- device_type = "pci";
- linux,pci-domain = <0>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000 /* downstream I/O */
- 0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
-
- interrupts = <GIC_SPI 35 IRQ_TYPE_NONE>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- clocks = <&gcc PCIE_A_CLK>,
- <&gcc PCIE_H_CLK>,
- <&gcc PCIE_PHY_CLK>,
- <&gcc PCIE_AUX_CLK>,
- <&gcc PCIE_ALT_REF_CLK>;
- clock-names = "core", "iface", "phy", "aux", "ref";
-
- assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
- assigned-clock-rates = <100000000>;
-
- resets = <&gcc PCIE_ACLK_RESET>,
- <&gcc PCIE_HCLK_RESET>,
- <&gcc PCIE_POR_RESET>,
- <&gcc PCIE_PCI_RESET>,
- <&gcc PCIE_PHY_RESET>,
- <&gcc PCIE_EXT_RESET>;
- reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-names = "default";
-
- perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-
- phy-tx0-term-offset = <7>;
-
- status = "disabled";
- };
-
- pcie1: pci@1b700000 {
- compatible = "qcom,pcie-ipq8064";
- reg = <0x1b700000 0x1000
- 0x1b702000 0x80
- 0x1b800000 0x100
- 0x31f00000 0x100000>;
- reg-names = "dbi", "elbi", "parf", "config";
- device_type = "pci";
- linux,pci-domain = <1>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000 /* downstream I/O */
- 0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
-
- interrupts = <GIC_SPI 57 IRQ_TYPE_NONE>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- clocks = <&gcc PCIE_1_A_CLK>,
- <&gcc PCIE_1_H_CLK>,
- <&gcc PCIE_1_PHY_CLK>,
- <&gcc PCIE_1_AUX_CLK>,
- <&gcc PCIE_1_ALT_REF_CLK>;
- clock-names = "core", "iface", "phy", "aux", "ref";
-
- assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
- assigned-clock-rates = <100000000>;
-
- resets = <&gcc PCIE_1_ACLK_RESET>,
- <&gcc PCIE_1_HCLK_RESET>,
- <&gcc PCIE_1_POR_RESET>,
- <&gcc PCIE_1_PCI_RESET>,
- <&gcc PCIE_1_PHY_RESET>,
- <&gcc PCIE_1_EXT_RESET>;
- reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
- pinctrl-0 = <&pcie1_pins>;
- pinctrl-names = "default";
-
- perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-
- phy-tx0-term-offset = <7>;
-
- status = "disabled";
- };
-
- pcie2: pci@1b900000 {
- compatible = "qcom,pcie-ipq8064";
- reg = <0x1b900000 0x1000
- 0x1b902000 0x80
- 0x1ba00000 0x100
- 0x35f00000 0x100000>;
- reg-names = "dbi", "elbi", "parf", "config";
- device_type = "pci";
- linux,pci-domain = <2>;
- bus-range = <0x00 0xff>;
- num-lanes = <1>;
- #address-cells = <3>;
- #size-cells = <2>;
-
- ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000 /* downstream I/O */
- 0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
-
- interrupts = <GIC_SPI 71 IRQ_TYPE_NONE>;
- interrupt-names = "msi";
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 0 0x7>;
- interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
- <0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
- <0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
- <0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
- clocks = <&gcc PCIE_2_A_CLK>,
- <&gcc PCIE_2_H_CLK>,
- <&gcc PCIE_2_PHY_CLK>,
- <&gcc PCIE_2_AUX_CLK>,
- <&gcc PCIE_2_ALT_REF_CLK>;
- clock-names = "core", "iface", "phy", "aux", "ref";
-
- assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
- assigned-clock-rates = <100000000>;
-
- resets = <&gcc PCIE_2_ACLK_RESET>,
- <&gcc PCIE_2_HCLK_RESET>,
- <&gcc PCIE_2_POR_RESET>,
- <&gcc PCIE_2_PCI_RESET>,
- <&gcc PCIE_2_PHY_RESET>,
- <&gcc PCIE_2_EXT_RESET>;
- reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
- pinctrl-0 = <&pcie2_pins>;
- pinctrl-names = "default";
-
- perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
-
- phy-tx0-term-offset = <7>;
-
- status = "disabled";
- };
-
- adm_dma: dma@18300000 {
- compatible = "qcom,adm";
- reg = <0x18300000 0x100000>;
- interrupts = <0 170 0>;
- #dma-cells = <1>;
-
- clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
- clock-names = "core", "iface";
-
- resets = <&gcc ADM0_RESET>,
- <&gcc ADM0_PBUS_RESET>,
- <&gcc ADM0_C0_RESET>,
- <&gcc ADM0_C1_RESET>,
- <&gcc ADM0_C2_RESET>;
- reset-names = "clk", "pbus", "c0", "c1", "c2";
- qcom,ee = <0>;
-
- status = "disabled";
- };
-
- nand@1ac00000 {
- compatible = "qcom,ipq806x-nand";
- reg = <0x1ac00000 0x800>;
-
- clocks = <&gcc EBI2_CLK>,
- <&gcc EBI2_AON_CLK>;
- clock-names = "core", "aon";
-
- dmas = <&adm_dma 3>;
- dma-names = "rxtx";
- qcom,cmd-crci = <15>;
- qcom,data-crci = <3>;
-
- status = "disabled";
-
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- nss_common: syscon@03000000 {
- compatible = "syscon";
- reg = <0x03000000 0x0000FFFF>;
- };
-
- qsgmii_csr: syscon@1bb00000 {
- compatible = "syscon";
- reg = <0x1bb00000 0x000001FF>;
- };
-
- stmmac_axi_setup: stmmac-axi-config {
- snps,wr_osr_lmt = <7>;
- snps,rd_osr_lmt = <7>;
- snps,blen = <16 0 0 0 0 0 0>;
- };
-
- gmac0: ethernet@37000000 {
- device_type = "network";
- compatible = "qcom,ipq806x-gmac";
- reg = <0x37000000 0x200000>;
- interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
-
- snps,axi-config = <&stmmac_axi_setup>;
- snps,pbl = <32>;
- snps,aal = <1>;
-
- qcom,nss-common = <&nss_common>;
- qcom,qsgmii-csr = <&qsgmii_csr>;
-
- clocks = <&gcc GMAC_CORE1_CLK>;
- clock-names = "stmmaceth";
-
- resets = <&gcc GMAC_CORE1_RESET>;
- reset-names = "stmmaceth";
-
- status = "disabled";
- };
-
- gmac1: ethernet@37200000 {
- device_type = "network";
- compatible = "qcom,ipq806x-gmac";
- reg = <0x37200000 0x200000>;
- interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
-
- snps,axi-config = <&stmmac_axi_setup>;
- snps,pbl = <32>;
- snps,aal = <1>;
-
- qcom,nss-common = <&nss_common>;
- qcom,qsgmii-csr = <&qsgmii_csr>;
-
- clocks = <&gcc GMAC_CORE2_CLK>;
- clock-names = "stmmaceth";
-
- resets = <&gcc GMAC_CORE2_RESET>;
- reset-names = "stmmaceth";
-
- status = "disabled";
- };
-
- gmac2: ethernet@37400000 {
- device_type = "network";
- compatible = "qcom,ipq806x-gmac";
- reg = <0x37400000 0x200000>;
- interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
-
- snps,axi-config = <&stmmac_axi_setup>;
- snps,pbl = <32>;
- snps,aal = <1>;
-
- qcom,nss-common = <&nss_common>;
- qcom,qsgmii-csr = <&qsgmii_csr>;
-
- clocks = <&gcc GMAC_CORE3_CLK>;
- clock-names = "stmmaceth";
-
- resets = <&gcc GMAC_CORE3_RESET>;
- reset-names = "stmmaceth";
-
- status = "disabled";
- };
-
- gmac3: ethernet@37600000 {
- device_type = "network";
- compatible = "qcom,ipq806x-gmac";
- reg = <0x37600000 0x200000>;
- interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "macirq";
-
- snps,axi-config = <&stmmac_axi_setup>;
- snps,pbl = <32>;
- snps,aal = <1>;
-
- qcom,nss-common = <&nss_common>;
- qcom,qsgmii-csr = <&qsgmii_csr>;
-
- clocks = <&gcc GMAC_CORE4_CLK>;
- clock-names = "stmmaceth";
-
- resets = <&gcc GMAC_CORE4_RESET>;
- reset-names = "stmmaceth";
-
- status = "disabled";
- };
-
- /* Temporary fixed regulator */
- vsdcc_fixed: vsdcc-regulator {
- compatible = "regulator-fixed";
- regulator-name = "SDCC Power";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- sdcc1bam:dma@12402000 {
- compatible = "qcom,bam-v1.3.0";
- reg = <0x12402000 0x8000>;
- interrupts = <0 98 0>;
- clocks = <&gcc SDC1_H_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- };
-
- sdcc3bam:dma@12182000 {
- compatible = "qcom,bam-v1.3.0";
- reg = <0x12182000 0x8000>;
- interrupts = <0 96 0>;
- clocks = <&gcc SDC3_H_CLK>;
- clock-names = "bam_clk";
- #dma-cells = <1>;
- qcom,ee = <0>;
- };
-
- amba {
- compatible = "arm,amba-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- sdcc1: sdcc@12400000 {
- status = "disabled";
- compatible = "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x00051180>;
- reg = <0x12400000 0x2000>;
- interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- max-frequency = <96000000>;
- non-removable;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- vmmc-supply = <&vsdcc_fixed>;
- dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
- dma-names = "tx", "rx";
- };
-
- sdcc3: sdcc@12180000 {
- compatible = "arm,pl18x", "arm,primecell";
- arm,primecell-periphid = <0x00051180>;
- status = "disabled";
- reg = <0x12180000 0x2000>;
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "cmd_irq";
- clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
- clock-names = "mclk", "apb_pclk";
- bus-width = <8>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- max-frequency = <192000000>;
- #mmc-ddr-1_8v;
- sd-uhs-sdr104;
- sd-uhs-ddr50;
- vqmmc-supply = <&vsdcc_fixed>;
- dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
- dma-names = "tx", "rx";
- };
- };
- };
-
- sfpb_mutex: sfpb-mutex {
- compatible = "qcom,sfpb-mutex";
- syscon = <&sfpb_mutex_block 4 4>;
-
- #hwlock-cells = <1>;
- };
-
- smem {
- compatible = "qcom,smem";
- memory-region = <&smem>;
- hwlocks = <&sfpb_mutex 3>;
- };
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
deleted file mode 100644
index 7cd1c7b567..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
+++ /dev/null
@@ -1,386 +0,0 @@
-#include "qcom-ipq8065.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "ZyXEL NBG6817";
- compatible = "zyxel,nbg6817", "qcom,ipq8065";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
- mdio-gpio0 = &mdio0;
- sdcc1 = &sdcc1;
-
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
- };
-
- chosen {
- bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd";
- stdout-path = "serial0:115200n8";
- append-rootblock = "root=/dev/mmcblk0p";
- };
-
- soc {
- pinmux@800000 {
- button_pins: button_pins {
- mux {
- pins = "gpio53", "gpio54", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- i2c4_pins: i2c4_pinmux {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- led_pins: led_pins {
- mux {
- pins = "gpio9", "gpio26", "gpio33", "gpio64";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
-
- clk {
- pins = "gpio1";
- input-disable;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
-
- tx {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
- input-disable;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- drive-strength = <10>;
- bias-none;
- };
-
- cs {
- pins = "gpio20";
- drive-strength = <12>;
- };
- };
-
- usb0_pwr_en_pins: usb0_pwr_en_pins {
- mux {
- pins = "gpio16", "gpio17";
- function = "gpio";
- drive-strength = <12>;
- };
-
- pwr {
- pins = "gpio17";
- bias-pull-down;
- output-high;
- };
-
- ovc {
- pins = "gpio16";
- bias-pull-up;
- };
- };
-
- usb1_pwr_en_pins: usb1_pwr_en_pins {
- mux {
- pins = "gpio14", "gpio15";
- function = "gpio";
- drive-strength = <12>;
- };
-
- pwr {
- pins = "gpio14";
- bias-pull-down;
- output-high;
- };
-
- ovc {
- pins = "gpio15";
- bias-pull-up;
- };
- };
- };
-
- gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
- status = "ok";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
- };
-
- gsbi5: gsbi@1a200000 {
- qcom,mode = <GSBI_PROT_SPI>;
- status = "ok";
-
- spi4: spi@1a280000 {
- status = "ok";
-
- pinctrl-0 = <&spi_pins>;
- pinctrl-names = "default";
-
- cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
-
- flash: m25p80@0 {
- compatible = "jedec,spi-nor";
- #address-cells = <1>;
- #size-cells = <1>;
- spi-max-frequency = <51200000>;
- reg = <0>;
-
- partitions {
- compatible = "qcom,smem";
- };
- };
- };
- };
-
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "ok";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "ok";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "ok";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "ok";
- };
-
- usb30@0 {
- status = "ok";
-
- pinctrl-0 = <&usb0_pwr_en_pins>;
- pinctrl-names = "default";
- };
-
- usb30@1 {
- status = "ok";
-
- pinctrl-0 = <&usb1_pwr_en_pins>;
- pinctrl-names = "default";
- };
-
- pcie0: pci@1b500000 {
- status = "ok";
- reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&pcie0_pins>;
- pinctrl-names = "default";
- };
-
- pcie1: pci@1b700000 {
- status = "ok";
- reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&pcie1_pins>;
- pinctrl-names = "default";
- force_gen1 = <1>;
- };
-
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0xaa545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
- 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
- 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
- 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
- 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
- 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
- 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
- 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
- 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
- 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
- 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
- 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
- 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
- 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- qca,ar8327-initvals = <
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x0000c 0x80 /* PAD6_MODE */
- >;
- };
- };
-
- gmac1: ethernet@37200000 {
- status = "ok";
- phy-mode = "rgmii";
- qcom,id = <1>;
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <0>;
- qcom,rgmii_delay = <1>;
- qcom,phy_mii_type = <0>;
- qcom,emulation = <0>;
- qcom,irq = <255>;
- mdiobus = <&mdio0>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- gmac2: ethernet@37400000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <2>;
- qcom,phy_mdio_addr = <0>; /* none */
- qcom,poll_required = <0>; /* no polling */
- qcom,rgmii_delay = <0>;
- qcom,phy_mii_type = <1>;
- qcom,emulation = <0>;
- qcom,irq = <258>;
- mdiobus = <&mdio0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- amba {
- sdcc1: sdcc@12400000 {
- status = "okay";
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- linux,input-type = <EV_SW>;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- internet {
- label = "nbg6817:white:internet";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
-
- power: power {
- label = "nbg6817:white:power";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- wifi2g {
- label = "nbg6817:amber:wifi2g";
- gpios = <&qcom_pinmux 33 GPIO_ACTIVE_HIGH>;
- };
-
- /* wifi2g amber from the manual is missing */
-
- wifi5g {
- label = "nbg6817:amber:wifi5g";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
-
- /* wifi5g amber from the manual is missing */
- };
-};
-
-&adm_dma {
- status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
deleted file mode 100644
index 447c0da696..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
+++ /dev/null
@@ -1,513 +0,0 @@
-#include "qcom-ipq8065.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Netgear Nighthawk X4S R7800";
- compatible = "netgear,r7800", "qcom,ipq8065", "qcom,ipq8064";
-
- memory@0 {
- reg = <0x42000000 0x1e000000>;
- device_type = "memory";
- };
-
- reserved-memory {
- #address-cells = <1>;
- #size-cells = <1>;
- ranges;
- rsvd@41200000 {
- reg = <0x41200000 0x300000>;
- no-map;
- };
-
- rsvd@5fe00000 {
- reg = <0x5fe00000 0x200000>;
- reusable;
- };
- };
-
- aliases {
- serial0 = &gsbi4_serial;
- mdio-gpio0 = &mdio0;
-
- led-boot = &power_white;
- led-failsafe = &power_amber;
- led-running = &power_white;
- led-upgrade = &power_amber;
- label-mac-device = &gmac2;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- soc {
- pinmux@800000 {
- button_pins: button_pins {
- mux {
- pins = "gpio6", "gpio54", "gpio65";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-up;
- };
- };
-
- i2c4_pins: i2c4_pinmux {
- mux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- drive-strength = <12>;
- bias-disable;
- };
- };
-
- led_pins: led_pins {
- pins = "gpio7", "gpio8", "gpio9", "gpio22", "gpio23",
- "gpio24","gpio26", "gpio53", "gpio64";
- function = "gpio";
- drive-strength = <2>;
- bias-pull-down;
- };
-
- nand_pins: nand_pins {
- mux {
- pins = "gpio34", "gpio35", "gpio36",
- "gpio37", "gpio38", "gpio39",
- "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- function = "nand";
- drive-strength = <10>;
- bias-disable;
- };
- pullups {
- pins = "gpio39";
- bias-pull-up;
- };
- hold {
- pins = "gpio40", "gpio41", "gpio42",
- "gpio43", "gpio44", "gpio45",
- "gpio46", "gpio47";
- bias-bus-hold;
- };
- };
-
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
-
- clk {
- pins = "gpio1";
- input-disable;
- };
- };
-
- rgmii2_pins: rgmii2_pins {
- mux {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
- function = "rgmii2";
- drive-strength = <8>;
- bias-disable;
- };
-
- tx {
- pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32" ;
- input-disable;
- };
- };
-
- spi_pins: spi_pins {
- mux {
- pins = "gpio18", "gpio19", "gpio21";
- function = "gsbi5";
- bias-pull-down;
- };
-
- data {
- pins = "gpio18", "gpio19";
- drive-strength = <10>;
- };
-
- cs {
- pins = "gpio20";
- drive-strength = <10>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio21";
- drive-strength = <12>;
- };
- };
-
- spi6_pins: spi6_pins {
- mux {
- pins = "gpio55", "gpio56", "gpio58";
- function = "gsbi6";
- bias-pull-down;
- };
-
- mosi {
- pins = "gpio55";
- drive-strength = <12>;
- };
-
- miso {
- pins = "gpio56";
- drive-strength = <14>;
- };
-
- cs {
- pins = "gpio57";
- drive-strength = <12>;
- bias-pull-up;
- };
-
- clk {
- pins = "gpio58";
- drive-strength = <12>;
- };
-
- reset {
- pins = "gpio33";
- drive-strength = <10>;
- bias-pull-down;
- output-high;
- };
- };
-
- usb0_pwr_en_pins: usb0_pwr_en_pins {
- mux {
- pins = "gpio15";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-high;
- };
- };
-
- usb1_pwr_en_pins: usb1_pwr_en_pins {
- mux {
- pins = "gpio16", "gpio68";
- function = "gpio";
- drive-strength = <12>;
- bias-pull-down;
- output-high;
- };
- };
- };
-
- gsbi@16300000 {
- qcom,mode = <GSBI_PROT_I2C_UART>;
- status = "ok";
- serial@16340000 {
- status = "ok";
- };
- /*
- * The i2c device on gsbi4 should not be enabled.
- * On ipq806x designs gsbi4 i2c is meant for exclusive
- * RPM usage. Turning this on in kernel manifests as
- * i2c failure for the RPM.
- */
- };
-
- sata-phy@1b400000 {
- status = "ok";
- };
-
- sata@29000000 {
- ports-implemented = <0x1>;
- status = "ok";
- };
-
- phy@100f8800 { /* USB3 port 1 HS phy */
- status = "ok";
- };
-
- phy@100f8830 { /* USB3 port 1 SS phy */
- status = "ok";
- };
-
- phy@110f8800 { /* USB3 port 0 HS phy */
- status = "ok";
- };
-
- phy@110f8830 { /* USB3 port 0 SS phy */
- status = "ok";
- };
-
- usb30@0 {
- status = "ok";
-
- pinctrl-0 = <&usb0_pwr_en_pins>;
- pinctrl-names = "default";
- };
-
- usb30@1 {
- status = "ok";
-
- pinctrl-0 = <&usb1_pwr_en_pins>;
- pinctrl-names = "default";
- };
-
- pcie0: pci@1b500000 {
- status = "ok";
- };
-
- pcie1: pci@1b700000 {
- status = "ok";
- force_gen1 = <1>;
- };
-
- nand@1ac00000 {
- status = "ok";
-
- pinctrl-0 = <&nand_pins>;
- pinctrl-names = "default";
-
- cs0 {
- reg = <0>;
- compatible = "qcom,nandcs";
-
- nand-ecc-strength = <4>;
- nand-bus-width = <8>;
- nand-ecc-step-size = <512>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- qcadata@0 {
- label = "qcadata";
- reg = <0x0000000 0x0c80000>;
- read-only;
- };
-
- APPSBL@c80000 {
- label = "APPSBL";
- reg = <0x0c80000 0x0500000>;
- read-only;
- };
-
- APPSBLENV@1180000 {
- label = "APPSBLENV";
- reg = <0x1180000 0x0080000>;
- read-only;
- };
-
- art: art@1200000 {
- label = "art";
- reg = <0x1200000 0x0140000>;
- read-only;
- };
-
- artbak: art@1340000 {
- label = "artbak";
- reg = <0x1340000 0x0140000>;
- read-only;
- };
-
- kernel@1480000 {
- label = "kernel";
- reg = <0x1480000 0x0400000>;
- };
-
- ubi@1880000 {
- label = "ubi";
- reg = <0x1880000 0x6080000>;
- };
-
- reserve@7900000 {
- label = "reserve";
- reg = <0x7900000 0x0700000>;
- read-only;
- };
- };
- };
- };
-
- mdio0: mdio {
- compatible = "virtual,mdio-gpio";
- #address-cells = <1>;
- #size-cells = <0>;
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
-
- phy0: ethernet-phy@0 {
- reg = <0>;
- qca,ar8327-initvals = <
- 0x00004 0x7600000 /* PAD0_MODE */
- 0x00008 0x1000000 /* PAD5_MODE */
- 0x0000c 0x80 /* PAD6_MODE */
- 0x000e4 0xaa545 /* MAC_POWER_SEL */
- 0x000e0 0xc74164de /* SGMII_CTRL */
- 0x0007c 0x4e /* PORT0_STATUS */
- 0x00094 0x4e /* PORT6_STATUS */
- 0x00970 0x1e864443 /* QM_PORT0_CTRL0 */
- 0x00974 0x000001c6 /* QM_PORT0_CTRL1 */
- 0x00978 0x19008643 /* QM_PORT1_CTRL0 */
- 0x0097c 0x000001c6 /* QM_PORT1_CTRL1 */
- 0x00980 0x19008643 /* QM_PORT2_CTRL0 */
- 0x00984 0x000001c6 /* QM_PORT2_CTRL1 */
- 0x00988 0x19008643 /* QM_PORT3_CTRL0 */
- 0x0098c 0x000001c6 /* QM_PORT3_CTRL1 */
- 0x00990 0x19008643 /* QM_PORT4_CTRL0 */
- 0x00994 0x000001c6 /* QM_PORT4_CTRL1 */
- 0x00998 0x1e864443 /* QM_PORT5_CTRL0 */
- 0x0099c 0x000001c6 /* QM_PORT5_CTRL1 */
- 0x009a0 0x1e864443 /* QM_PORT6_CTRL0 */
- 0x009a4 0x000001c6 /* QM_PORT6_CTRL1 */
- >;
- qca,ar8327-vlans = <
- 0x1 0x5e /* VLAN1 Ports 1/2/3/4/6 */
- 0x2 0x21 /* VLAN2 Ports 0/5 */
- >;
- };
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- qca,ar8327-initvals = <
- 0x000e4 0x6a545 /* MAC_POWER_SEL */
- 0x0000c 0x80 /* PAD6_MODE */
- >;
- };
- };
-
- gmac1: ethernet@37200000 {
- status = "ok";
- phy-mode = "rgmii";
- qcom,id = <1>;
- qcom,phy_mdio_addr = <4>;
- qcom,poll_required = <0>;
- qcom,rgmii_delay = <1>;
- qcom,phy_mii_type = <0>;
- qcom,emulation = <0>;
- qcom,irq = <255>;
- mdiobus = <&mdio0>;
-
- pinctrl-0 = <&rgmii2_pins>;
- pinctrl-names = "default";
-
- mtd-mac-address = <&art 6>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- gmac2: ethernet@37400000 {
- status = "ok";
- phy-mode = "sgmii";
- qcom,id = <2>;
- qcom,phy_mdio_addr = <0>; /* none */
- qcom,poll_required = <0>; /* no polling */
- qcom,rgmii_delay = <0>;
- qcom,phy_mii_type = <1>;
- qcom,emulation = <0>;
- qcom,irq = <258>;
- mdiobus = <&mdio0>;
-
- mtd-mac-address = <&art 0>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
- };
-
- keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&button_pins>;
- pinctrl-names = "default";
-
- wifi {
- label = "wifi";
- gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- reset {
- label = "reset";
- gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- debounce-interval = <60>;
- wakeup-source;
- };
-
- wps {
- label = "wps";
- gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- debounce-interval = <60>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&led_pins>;
- pinctrl-names = "default";
-
- power_white: power_white {
- label = "r7800:white:power";
- gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
- default-state = "keep";
- };
-
- power_amber: power_amber {
- label = "r7800:amber:power";
- gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
- };
-
- wan_white {
- label = "r7800:white:wan";
- gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
- };
-
- wan_amber {
- label = "r7800:amber:wan";
- gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
- };
-
- usb1 {
- label = "r7800:white:usb1";
- gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
- };
-
- usb2 {
- label = "r7800:white:usb2";
- gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
- };
-
- esata {
- label = "r7800:white:esata";
- gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
- };
-
- wifi {
- label = "r7800:white:wifi";
- gpios = <&qcom_pinmux 64 GPIO_ACTIVE_HIGH>;
- };
-
- wps {
- label = "r7800:white:wps";
- gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
- };
- };
-};
-
-&adm_dma {
- status = "ok";
-};
diff --git a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi
deleted file mode 100644
index 86de2bd8be..0000000000
--- a/target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ /dev/null
@@ -1,78 +0,0 @@
-#include "qcom-ipq8064-v2.0.dtsi"
-
-/ {
- model = "Qualcomm IPQ8065";
- compatible = "qcom,ipq8065", "qcom,ipq8064";
-
- qcom,pvs {
- qcom,pvs-format-a;
- qcom,speed0-pvs0-bin-v0 =
- < 1725000000 1262500 >,
- < 1400000000 1175000 >,
- < 1000000000 1100000 >,
- < 800000000 1050000 >,
- < 600000000 1000000 >,
- < 384000000 975000 >;
- qcom,speed0-pvs1-bin-v0 =
- < 1725000000 1225000 >,
- < 1400000000 1150000 >,
- < 1000000000 1075000 >,
- < 800000000 1025000 >,
- < 600000000 975000 >,
- < 384000000 950000 >;
- qcom,speed0-pvs2-bin-v0 =
- < 1725000000 1200000 >,
- < 1400000000 1125000 >,
- < 1000000000 1050000 >,
- < 800000000 1000000 >,
- < 600000000 950000 >,
- < 384000000 925000 >;
- qcom,speed0-pvs3-bin-v0 =
- < 1725000000 1175000 >,
- < 1400000000 1100000 >,
- < 1000000000 1025000 >,
- < 800000000 975000 >,
- < 600000000 925000 >,
- < 384000000 900000 >;
- qcom,speed0-pvs4-bin-v0 =
- < 1725000000 1150000 >,
- < 1400000000 1075000 >,
- < 1000000000 1000000 >,
- < 800000000 950000 >,
- < 600000000 900000 >,
- < 384000000 875000 >;
- qcom,speed0-pvs5-bin-v0 =
- < 1725000000 1100000 >,
- < 1400000000 1025000 >,
- < 1000000000 950000 >,
- < 800000000 900000 >,
- < 600000000 850000 >,
- < 384000000 825000 >;
- qcom,speed0-pvs6-bin-v0 =
- < 1725000000 1050000 >,
- < 1400000000 975000 >,
- < 1000000000 900000 >,
- < 800000000 850000 >,
- < 600000000 800000 >,
- < 384000000 775000 >;
- };
-
- soc: soc {
-
- rpm@108000 {
-
- regulators {
-
- smb208_s2a: s2a {
- regulator-min-microvolt = <775000>;
- regulator-max-microvolt = <1275000>;
- };
-
- smb208_s2b: s2b {
- regulator-min-microvolt = <775000>;
- regulator-max-microvolt = <1275000>;
- };
- };
- };
- };
-};
diff --git a/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch b/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
deleted file mode 100644
index 83d7bbc6f4..0000000000
--- a/target/linux/ipq806x/patches-4.14/0001-dtbindings-qcom_adm-Fix-channel-specifiers.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 28d0ed88f536dd639adf1b0c7c08e04be3c8f294 Mon Sep 17 00:00:00 2001
-From: Thomas Pedersen <twp@codeaurora.org>
-Date: Mon, 16 May 2016 17:58:50 -0700
-Subject: [PATCH 01/69] dtbindings: qcom_adm: Fix channel specifiers
-
-Original patch from Andy Gross.
-
-This patch removes the crci information from the dma
-channel property. At least one client device requires
-using more than one CRCI value for a channel. This does
-not match the current binding and the crci information
-needs to be removed.
-
-Instead, the client device will provide this information
-via other means.
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
-Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
----
- Documentation/devicetree/bindings/dma/qcom_adm.txt | 16 ++++++----------
- 1 file changed, 6 insertions(+), 10 deletions(-)
-
---- a/Documentation/devicetree/bindings/dma/qcom_adm.txt
-+++ b/Documentation/devicetree/bindings/dma/qcom_adm.txt
-@@ -4,8 +4,7 @@ Required properties:
- - compatible: must contain "qcom,adm" for IPQ/APQ8064 and MSM8960
- - reg: Address range for DMA registers
- - interrupts: Should contain one interrupt shared by all channels
--- #dma-cells: must be <2>. First cell denotes the channel number. Second cell
-- denotes CRCI (client rate control interface) flow control assignment.
-+- #dma-cells: must be <1>. First cell denotes the channel number.
- - clocks: Should contain the core clock and interface clock.
- - clock-names: Must contain "core" for the core clock and "iface" for the
- interface clock.
-@@ -22,7 +21,7 @@ Example:
- compatible = "qcom,adm";
- reg = <0x18300000 0x100000>;
- interrupts = <0 170 0>;
-- #dma-cells = <2>;
-+ #dma-cells = <1>;
-
- clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
- clock-names = "core", "iface";
-@@ -35,15 +34,12 @@ Example:
- qcom,ee = <0>;
- };
-
--DMA clients must use the format descripted in the dma.txt file, using a three
-+DMA clients must use the format descripted in the dma.txt file, using a two
- cell specifier for each channel.
-
--Each dmas request consists of 3 cells:
-+Each dmas request consists of two cells:
- 1. phandle pointing to the DMA controller
- 2. channel number
-- 3. CRCI assignment, if applicable. If no CRCI flow control is required, use 0.
-- The CRCI is used for flow control. It identifies the peripheral device that
-- is the source/destination for the transferred data.
-
- Example:
-
-@@ -55,7 +51,7 @@ Example:
-
- cs-gpios = <&qcom_pinmux 20 0>;
-
-- dmas = <&adm_dma 6 9>,
-- <&adm_dma 5 10>;
-+ dmas = <&adm_dma 6>,
-+ <&adm_dma 5>;
- dma-names = "rx", "tx";
- };
diff --git a/target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch b/target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch
deleted file mode 100644
index fedb8ed798..0000000000
--- a/target/linux/ipq806x/patches-4.14/0002-dmaengine-Add-ADM-driver.patch
+++ /dev/null
@@ -1,966 +0,0 @@
-From 563fa24db4e529c5a3311928d73a8a90531ee527 Mon Sep 17 00:00:00 2001
-From: Thomas Pedersen <twp@codeaurora.org>
-Date: Mon, 16 May 2016 17:58:51 -0700
-Subject: [PATCH 02/69] dmaengine: Add ADM driver
-
-Original patch by Andy Gross.
-
-Add the DMA engine driver for the QCOM Application Data Mover (ADM) DMA
-controller found in the MSM8x60 and IPQ/APQ8064 platforms.
-
-The ADM supports both memory to memory transactions and memory
-to/from peripheral device transactions. The controller also provides flow
-control capabilities for transactions to/from peripheral devices.
-
-The initial release of this driver supports slave transfers to/from peripherals
-and also incorporates CRCI (client rate control interface) flow control.
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
-Signed-off-by: Thomas Pedersen <twp@codeaurora.org>
----
- drivers/dma/qcom/Kconfig | 10 +
- drivers/dma/qcom/Makefile | 1 +
- drivers/dma/qcom/qcom_adm.c | 900 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 911 insertions(+)
- create mode 100644 drivers/dma/qcom/qcom_adm.c
-
---- a/drivers/dma/qcom/Kconfig
-+++ b/drivers/dma/qcom/Kconfig
-@@ -27,3 +27,13 @@ config QCOM_HIDMA
- (user to kernel, kernel to kernel, etc.). It only supports
- memcpy interface. The core is not intended for general
- purpose slave DMA.
-+
-+config QCOM_ADM
-+ tristate "Qualcomm ADM support"
-+ depends on ARCH_QCOM || (COMPILE_TEST && OF && ARM)
-+ select DMA_ENGINE
-+ select DMA_VIRTUAL_CHANNELS
-+ ---help---
-+ Enable support for the Qualcomm ADM DMA controller. This controller
-+ provides DMA capabilities for both general purpose and on-chip
-+ peripheral devices.
---- a/drivers/dma/qcom/Makefile
-+++ b/drivers/dma/qcom/Makefile
-@@ -4,3 +4,4 @@ obj-$(CONFIG_QCOM_HIDMA_MGMT) += hdma_mg
- hdma_mgmt-objs := hidma_mgmt.o hidma_mgmt_sys.o
- obj-$(CONFIG_QCOM_HIDMA) += hdma.o
- hdma-objs := hidma_ll.o hidma.o hidma_dbg.o
-+obj-$(CONFIG_QCOM_ADM) += qcom_adm.o
---- /dev/null
-+++ b/drivers/dma/qcom/qcom_adm.c
-@@ -0,0 +1,914 @@
-+/*
-+ * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/io.h>
-+#include <linux/init.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/interrupt.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/scatterlist.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/of_address.h>
-+#include <linux/of_irq.h>
-+#include <linux/of_dma.h>
-+#include <linux/reset.h>
-+#include <linux/clk.h>
-+#include <linux/dmaengine.h>
-+
-+#include "../dmaengine.h"
-+#include "../virt-dma.h"
-+
-+/* ADM registers - calculated from channel number and security domain */
-+#define ADM_CHAN_MULTI 0x4
-+#define ADM_CI_MULTI 0x4
-+#define ADM_CRCI_MULTI 0x4
-+#define ADM_EE_MULTI 0x800
-+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
-+#define ADM_EE_OFFS(ee) (ADM_EE_MULTI * ee)
-+#define ADM_CHAN_EE_OFFS(chan, ee) (ADM_CHAN_OFFS(chan) + ADM_EE_OFFS(ee))
-+#define ADM_CHAN_OFFS(chan) (ADM_CHAN_MULTI * chan)
-+#define ADM_CI_OFFS(ci) (ADM_CHAN_OFF(ci))
-+#define ADM_CH_CMD_PTR(chan, ee) (ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_CH_RSLT(chan, ee) (0x40 + ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_CH_FLUSH_STATE0(chan, ee) (0x80 + ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_CH_STATUS_SD(chan, ee) (0x200 + ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_CH_CONF(chan) (0x240 + ADM_CHAN_OFFS(chan))
-+#define ADM_CH_RSLT_CONF(chan, ee) (0x300 + ADM_CHAN_EE_OFFS(chan, ee))
-+#define ADM_SEC_DOMAIN_IRQ_STATUS(ee) (0x380 + ADM_EE_OFFS(ee))
-+#define ADM_CI_CONF(ci) (0x390 + ci * ADM_CI_MULTI)
-+#define ADM_GP_CTL 0x3d8
-+#define ADM_CRCI_CTL(crci, ee) (0x400 + crci * ADM_CRCI_MULTI + \
-+ ADM_EE_OFFS(ee))
-+
-+/* channel status */
-+#define ADM_CH_STATUS_VALID BIT(1)
-+
-+/* channel result */
-+#define ADM_CH_RSLT_VALID BIT(31)
-+#define ADM_CH_RSLT_ERR BIT(3)
-+#define ADM_CH_RSLT_FLUSH BIT(2)
-+#define ADM_CH_RSLT_TPD BIT(1)
-+
-+/* channel conf */
-+#define ADM_CH_CONF_SHADOW_EN BIT(12)
-+#define ADM_CH_CONF_MPU_DISABLE BIT(11)
-+#define ADM_CH_CONF_PERM_MPU_CONF BIT(9)
-+#define ADM_CH_CONF_FORCE_RSLT_EN BIT(7)
-+#define ADM_CH_CONF_SEC_DOMAIN(ee) (((ee & 0x3) << 4) | ((ee & 0x4) << 11))
-+
-+/* channel result conf */
-+#define ADM_CH_RSLT_CONF_FLUSH_EN BIT(1)
-+#define ADM_CH_RSLT_CONF_IRQ_EN BIT(0)
-+
-+/* CRCI CTL */
-+#define ADM_CRCI_CTL_MUX_SEL BIT(18)
-+#define ADM_CRCI_CTL_RST BIT(17)
-+
-+/* CI configuration */
-+#define ADM_CI_RANGE_END(x) (x << 24)
-+#define ADM_CI_RANGE_START(x) (x << 16)
-+#define ADM_CI_BURST_4_WORDS BIT(2)
-+#define ADM_CI_BURST_8_WORDS BIT(3)
-+
-+/* GP CTL */
-+#define ADM_GP_CTL_LP_EN BIT(12)
-+#define ADM_GP_CTL_LP_CNT(x) (x << 8)
-+
-+/* Command pointer list entry */
-+#define ADM_CPLE_LP BIT(31)
-+#define ADM_CPLE_CMD_PTR_LIST BIT(29)
-+
-+/* Command list entry */
-+#define ADM_CMD_LC BIT(31)
-+#define ADM_CMD_DST_CRCI(n) (((n) & 0xf) << 7)
-+#define ADM_CMD_SRC_CRCI(n) (((n) & 0xf) << 3)
-+
-+#define ADM_CMD_TYPE_SINGLE 0x0
-+#define ADM_CMD_TYPE_BOX 0x3
-+
-+#define ADM_CRCI_MUX_SEL BIT(4)
-+#define ADM_DESC_ALIGN 8
-+#define ADM_MAX_XFER (SZ_64K-1)
-+#define ADM_MAX_ROWS (SZ_64K-1)
-+#define ADM_MAX_CHANNELS 16
-+
-+struct adm_desc_hw_box {
-+ u32 cmd;
-+ u32 src_addr;
-+ u32 dst_addr;
-+ u32 row_len;
-+ u32 num_rows;
-+ u32 row_offset;
-+};
-+
-+struct adm_desc_hw_single {
-+ u32 cmd;
-+ u32 src_addr;
-+ u32 dst_addr;
-+ u32 len;
-+};
-+
-+struct adm_async_desc {
-+ struct virt_dma_desc vd;
-+ struct adm_device *adev;
-+
-+ size_t length;
-+ enum dma_transfer_direction dir;
-+ dma_addr_t dma_addr;
-+ size_t dma_len;
-+
-+ void *cpl;
-+ dma_addr_t cp_addr;
-+ u32 crci;
-+ u32 mux;
-+ u32 blk_size;
-+};
-+
-+struct adm_chan {
-+ struct virt_dma_chan vc;
-+ struct adm_device *adev;
-+
-+ /* parsed from DT */
-+ u32 id; /* channel id */
-+
-+ struct adm_async_desc *curr_txd;
-+ struct dma_slave_config slave;
-+ struct list_head node;
-+
-+ int error;
-+ int initialized;
-+};
-+
-+static inline struct adm_chan *to_adm_chan(struct dma_chan *common)
-+{
-+ return container_of(common, struct adm_chan, vc.chan);
-+}
-+
-+struct adm_device {
-+ void __iomem *regs;
-+ struct device *dev;
-+ struct dma_device common;
-+ struct device_dma_parameters dma_parms;
-+ struct adm_chan *channels;
-+
-+ u32 ee;
-+
-+ struct clk *core_clk;
-+ struct clk *iface_clk;
-+
-+ struct reset_control *clk_reset;
-+ struct reset_control *c0_reset;
-+ struct reset_control *c1_reset;
-+ struct reset_control *c2_reset;
-+ int irq;
-+};
-+
-+/**
-+ * adm_free_chan - Frees dma resources associated with the specific channel
-+ *
-+ * Free all allocated descriptors associated with this channel
-+ *
-+ */
-+static void adm_free_chan(struct dma_chan *chan)
-+{
-+ /* free all queued descriptors */
-+ vchan_free_chan_resources(to_virt_chan(chan));
-+}
-+
-+/**
-+ * adm_get_blksize - Get block size from burst value
-+ *
-+ */
-+static int adm_get_blksize(unsigned int burst)
-+{
-+ int ret;
-+
-+ switch (burst) {
-+ case 16:
-+ case 32:
-+ case 64:
-+ case 128:
-+ ret = ffs(burst>>4) - 1;
-+ break;
-+ case 192:
-+ ret = 4;
-+ break;
-+ case 256:
-+ ret = 5;
-+ break;
-+ default:
-+ ret = -EINVAL;
-+ break;
-+ }
-+
-+ return ret;
-+}
-+
-+/**
-+ * adm_process_fc_descriptors - Process descriptors for flow controlled xfers
-+ *
-+ * @achan: ADM channel
-+ * @desc: Descriptor memory pointer
-+ * @sg: Scatterlist entry
-+ * @crci: CRCI value
-+ * @burst: Burst size of transaction
-+ * @direction: DMA transfer direction
-+ */
-+static void *adm_process_fc_descriptors(struct adm_chan *achan,
-+ void *desc, struct scatterlist *sg, u32 crci, u32 burst,
-+ enum dma_transfer_direction direction)
-+{
-+ struct adm_desc_hw_box *box_desc = NULL;
-+ struct adm_desc_hw_single *single_desc;
-+ u32 remainder = sg_dma_len(sg);
-+ u32 rows, row_offset, crci_cmd;
-+ u32 mem_addr = sg_dma_address(sg);
-+ u32 *incr_addr = &mem_addr;
-+ u32 *src, *dst;
-+
-+ if (direction == DMA_DEV_TO_MEM) {
-+ crci_cmd = ADM_CMD_SRC_CRCI(crci);
-+ row_offset = burst;
-+ src = &achan->slave.src_addr;
-+ dst = &mem_addr;
-+ } else {
-+ crci_cmd = ADM_CMD_DST_CRCI(crci);
-+ row_offset = burst << 16;
-+ src = &mem_addr;
-+ dst = &achan->slave.dst_addr;
-+ }
-+
-+ while (remainder >= burst) {
-+ box_desc = desc;
-+ box_desc->cmd = ADM_CMD_TYPE_BOX | crci_cmd;
-+ box_desc->row_offset = row_offset;
-+ box_desc->src_addr = *src;
-+ box_desc->dst_addr = *dst;
-+
-+ rows = remainder / burst;
-+ rows = min_t(u32, rows, ADM_MAX_ROWS);
-+ box_desc->num_rows = rows << 16 | rows;
-+ box_desc->row_len = burst << 16 | burst;
-+
-+ *incr_addr += burst * rows;
-+ remainder -= burst * rows;
-+ desc += sizeof(*box_desc);
-+ }
-+
-+ /* if leftover bytes, do one single descriptor */
-+ if (remainder) {
-+ single_desc = desc;
-+ single_desc->cmd = ADM_CMD_TYPE_SINGLE | crci_cmd;
-+ single_desc->len = remainder;
-+ single_desc->src_addr = *src;
-+ single_desc->dst_addr = *dst;
-+ desc += sizeof(*single_desc);
-+
-+ if (sg_is_last(sg))
-+ single_desc->cmd |= ADM_CMD_LC;
-+ } else {
-+ if (box_desc && sg_is_last(sg))
-+ box_desc->cmd |= ADM_CMD_LC;
-+ }
-+
-+ return desc;
-+}
-+
-+/**
-+ * adm_process_non_fc_descriptors - Process descriptors for non-fc xfers
-+ *
-+ * @achan: ADM channel
-+ * @desc: Descriptor memory pointer
-+ * @sg: Scatterlist entry
-+ * @direction: DMA transfer direction
-+ */
-+static void *adm_process_non_fc_descriptors(struct adm_chan *achan,
-+ void *desc, struct scatterlist *sg,
-+ enum dma_transfer_direction direction)
-+{
-+ struct adm_desc_hw_single *single_desc;
-+ u32 remainder = sg_dma_len(sg);
-+ u32 mem_addr = sg_dma_address(sg);
-+ u32 *incr_addr = &mem_addr;
-+ u32 *src, *dst;
-+
-+ if (direction == DMA_DEV_TO_MEM) {
-+ src = &achan->slave.src_addr;
-+ dst = &mem_addr;
-+ } else {
-+ src = &mem_addr;
-+ dst = &achan->slave.dst_addr;
-+ }
-+
-+ do {
-+ single_desc = desc;
-+ single_desc->cmd = ADM_CMD_TYPE_SINGLE;
-+ single_desc->src_addr = *src;
-+ single_desc->dst_addr = *dst;
-+ single_desc->len = (remainder > ADM_MAX_XFER) ?
-+ ADM_MAX_XFER : remainder;
-+
-+ remainder -= single_desc->len;
-+ *incr_addr += single_desc->len;
-+ desc += sizeof(*single_desc);
-+ } while (remainder);
-+
-+ /* set last command if this is the end of the whole transaction */
-+ if (sg_is_last(sg))
-+ single_desc->cmd |= ADM_CMD_LC;
-+
-+ return desc;
-+}
-+
-+/**
-+ * adm_prep_slave_sg - Prep slave sg transaction
-+ *
-+ * @chan: dma channel
-+ * @sgl: scatter gather list
-+ * @sg_len: length of sg
-+ * @direction: DMA transfer direction
-+ * @flags: DMA flags
-+ * @context: transfer context (unused)
-+ */
-+static struct dma_async_tx_descriptor *adm_prep_slave_sg(struct dma_chan *chan,
-+ struct scatterlist *sgl, unsigned int sg_len,
-+ enum dma_transfer_direction direction, unsigned long flags,
-+ void *context)
-+{
-+ struct adm_chan *achan = to_adm_chan(chan);
-+ struct adm_device *adev = achan->adev;
-+ struct adm_async_desc *async_desc;
-+ struct scatterlist *sg;
-+ dma_addr_t cple_addr;
-+ u32 i, burst;
-+ u32 single_count = 0, box_count = 0, crci = 0;
-+ void *desc;
-+ u32 *cple;
-+ int blk_size = 0;
-+
-+ if (!is_slave_direction(direction)) {
-+ dev_err(adev->dev, "invalid dma direction\n");
-+ return NULL;
-+ }
-+
-+ /*
-+ * get burst value from slave configuration
-+ */
-+ burst = (direction == DMA_MEM_TO_DEV) ?
-+ achan->slave.dst_maxburst :
-+ achan->slave.src_maxburst;
-+
-+ /* if using flow control, validate burst and crci values */
-+ if (achan->slave.device_fc) {
-+
-+ blk_size = adm_get_blksize(burst);
-+ if (blk_size < 0) {
-+ dev_err(adev->dev, "invalid burst value: %d\n",
-+ burst);
-+ return ERR_PTR(-EINVAL);
-+ }
-+
-+ crci = achan->slave.slave_id & 0xf;
-+ if (!crci || achan->slave.slave_id > 0x1f) {
-+ dev_err(adev->dev, "invalid crci value\n");
-+ return ERR_PTR(-EINVAL);
-+ }
-+ }
-+
-+ /* iterate through sgs and compute allocation size of structures */
-+ for_each_sg(sgl, sg, sg_len, i) {
-+ if (achan->slave.device_fc) {
-+ box_count += DIV_ROUND_UP(sg_dma_len(sg) / burst,
-+ ADM_MAX_ROWS);
-+ if (sg_dma_len(sg) % burst)
-+ single_count++;
-+ } else {
-+ single_count += DIV_ROUND_UP(sg_dma_len(sg),
-+ ADM_MAX_XFER);
-+ }
-+ }
-+
-+ async_desc = kzalloc(sizeof(*async_desc), GFP_ATOMIC);
-+ if (!async_desc)
-+ return ERR_PTR(-ENOMEM);
-+
-+ if (crci)
-+ async_desc->mux = achan->slave.slave_id & ADM_CRCI_MUX_SEL ?
-+ ADM_CRCI_CTL_MUX_SEL : 0;
-+ async_desc->crci = crci;
-+ async_desc->blk_size = blk_size;
-+ async_desc->dma_len = single_count * sizeof(struct adm_desc_hw_single) +
-+ box_count * sizeof(struct adm_desc_hw_box) +
-+ sizeof(*cple) + 2 * ADM_DESC_ALIGN;
-+
-+ async_desc->cpl = kzalloc(async_desc->dma_len, GFP_ATOMIC);
-+ if (!async_desc->cpl)
-+ goto free;
-+
-+ async_desc->adev = adev;
-+
-+ /* both command list entry and descriptors must be 8 byte aligned */
-+ cple = PTR_ALIGN(async_desc->cpl, ADM_DESC_ALIGN);
-+ desc = PTR_ALIGN(cple + 1, ADM_DESC_ALIGN);
-+
-+ for_each_sg(sgl, sg, sg_len, i) {
-+ async_desc->length += sg_dma_len(sg);
-+
-+ if (achan->slave.device_fc)
-+ desc = adm_process_fc_descriptors(achan, desc, sg, crci,
-+ burst, direction);
-+ else
-+ desc = adm_process_non_fc_descriptors(achan, desc, sg,
-+ direction);
-+ }
-+
-+ async_desc->dma_addr = dma_map_single(adev->dev, async_desc->cpl,
-+ async_desc->dma_len,
-+ DMA_TO_DEVICE);
-+ if (dma_mapping_error(adev->dev, async_desc->dma_addr))
-+ goto free;
-+
-+ cple_addr = async_desc->dma_addr + ((void *)cple - async_desc->cpl);
-+
-+ /* init cmd list */
-+ dma_sync_single_for_cpu(adev->dev, cple_addr, sizeof(*cple),
-+ DMA_TO_DEVICE);
-+ *cple = ADM_CPLE_LP;
-+ *cple |= (async_desc->dma_addr + ADM_DESC_ALIGN) >> 3;
-+ dma_sync_single_for_device(adev->dev, cple_addr, sizeof(*cple),
-+ DMA_TO_DEVICE);
-+
-+ return vchan_tx_prep(&achan->vc, &async_desc->vd, flags);
-+
-+free:
-+ kfree(async_desc);
-+ return ERR_PTR(-ENOMEM);
-+}
-+
-+/**
-+ * adm_terminate_all - terminate all transactions on a channel
-+ * @achan: adm dma channel
-+ *
-+ * Dequeues and frees all transactions, aborts current transaction
-+ * No callbacks are done
-+ *
-+ */
-+static int adm_terminate_all(struct dma_chan *chan)
-+{
-+ struct adm_chan *achan = to_adm_chan(chan);
-+ struct adm_device *adev = achan->adev;
-+ unsigned long flags;
-+ LIST_HEAD(head);
-+
-+ spin_lock_irqsave(&achan->vc.lock, flags);
-+ vchan_get_all_descriptors(&achan->vc, &head);
-+
-+ /* send flush command to terminate current transaction */
-+ writel_relaxed(0x0,
-+ adev->regs + ADM_CH_FLUSH_STATE0(achan->id, adev->ee));
-+
-+ spin_unlock_irqrestore(&achan->vc.lock, flags);
-+
-+ vchan_dma_desc_free_list(&achan->vc, &head);
-+
-+ return 0;
-+}
-+
-+static int adm_slave_config(struct dma_chan *chan, struct dma_slave_config *cfg)
-+{
-+ struct adm_chan *achan = to_adm_chan(chan);
-+ unsigned long flag;
-+
-+ spin_lock_irqsave(&achan->vc.lock, flag);
-+ memcpy(&achan->slave, cfg, sizeof(struct dma_slave_config));
-+ spin_unlock_irqrestore(&achan->vc.lock, flag);
-+
-+ return 0;
-+}
-+
-+/**
-+ * adm_start_dma - start next transaction
-+ * @achan - ADM dma channel
-+ */
-+static void adm_start_dma(struct adm_chan *achan)
-+{
-+ struct virt_dma_desc *vd = vchan_next_desc(&achan->vc);
-+ struct adm_device *adev = achan->adev;
-+ struct adm_async_desc *async_desc;
-+
-+ lockdep_assert_held(&achan->vc.lock);
-+
-+ if (!vd)
-+ return;
-+
-+ list_del(&vd->node);
-+
-+ /* write next command list out to the CMD FIFO */
-+ async_desc = container_of(vd, struct adm_async_desc, vd);
-+ achan->curr_txd = async_desc;
-+
-+ /* reset channel error */
-+ achan->error = 0;
-+
-+ if (!achan->initialized) {
-+ /* enable interrupts */
-+ writel(ADM_CH_CONF_SHADOW_EN |
-+ ADM_CH_CONF_PERM_MPU_CONF |
-+ ADM_CH_CONF_MPU_DISABLE |
-+ ADM_CH_CONF_SEC_DOMAIN(adev->ee),
-+ adev->regs + ADM_CH_CONF(achan->id));
-+
-+ writel(ADM_CH_RSLT_CONF_IRQ_EN | ADM_CH_RSLT_CONF_FLUSH_EN,
-+ adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
-+
-+ achan->initialized = 1;
-+ }
-+
-+ /* set the crci block size if this transaction requires CRCI */
-+ if (async_desc->crci) {
-+ writel(async_desc->mux | async_desc->blk_size,
-+ adev->regs + ADM_CRCI_CTL(async_desc->crci, adev->ee));
-+ }
-+
-+ /* make sure IRQ enable doesn't get reordered */
-+ wmb();
-+
-+ /* write next command list out to the CMD FIFO */
-+ writel(ALIGN(async_desc->dma_addr, ADM_DESC_ALIGN) >> 3,
-+ adev->regs + ADM_CH_CMD_PTR(achan->id, adev->ee));
-+}
-+
-+/**
-+ * adm_dma_irq - irq handler for ADM controller
-+ * @irq: IRQ of interrupt
-+ * @data: callback data
-+ *
-+ * IRQ handler for the bam controller
-+ */
-+static irqreturn_t adm_dma_irq(int irq, void *data)
-+{
-+ struct adm_device *adev = data;
-+ u32 srcs, i;
-+ struct adm_async_desc *async_desc;
-+ unsigned long flags;
-+
-+ srcs = readl_relaxed(adev->regs +
-+ ADM_SEC_DOMAIN_IRQ_STATUS(adev->ee));
-+
-+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
-+ struct adm_chan *achan = &adev->channels[i];
-+ u32 status, result;
-+
-+ if (srcs & BIT(i)) {
-+ status = readl_relaxed(adev->regs +
-+ ADM_CH_STATUS_SD(i, adev->ee));
-+
-+ /* if no result present, skip */
-+ if (!(status & ADM_CH_STATUS_VALID))
-+ continue;
-+
-+ result = readl_relaxed(adev->regs +
-+ ADM_CH_RSLT(i, adev->ee));
-+
-+ /* no valid results, skip */
-+ if (!(result & ADM_CH_RSLT_VALID))
-+ continue;
-+
-+ /* flag error if transaction was flushed or failed */
-+ if (result & (ADM_CH_RSLT_ERR | ADM_CH_RSLT_FLUSH))
-+ achan->error = 1;
-+
-+ spin_lock_irqsave(&achan->vc.lock, flags);
-+ async_desc = achan->curr_txd;
-+
-+ achan->curr_txd = NULL;
-+
-+ if (async_desc) {
-+ vchan_cookie_complete(&async_desc->vd);
-+
-+ /* kick off next DMA */
-+ adm_start_dma(achan);
-+ }
-+
-+ spin_unlock_irqrestore(&achan->vc.lock, flags);
-+ }
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+/**
-+ * adm_tx_status - returns status of transaction
-+ * @chan: dma channel
-+ * @cookie: transaction cookie
-+ * @txstate: DMA transaction state
-+ *
-+ * Return status of dma transaction
-+ */
-+static enum dma_status adm_tx_status(struct dma_chan *chan, dma_cookie_t cookie,
-+ struct dma_tx_state *txstate)
-+{
-+ struct adm_chan *achan = to_adm_chan(chan);
-+ struct virt_dma_desc *vd;
-+ enum dma_status ret;
-+ unsigned long flags;
-+ size_t residue = 0;
-+
-+ ret = dma_cookie_status(chan, cookie, txstate);
-+ if (ret == DMA_COMPLETE || !txstate)
-+ return ret;
-+
-+ spin_lock_irqsave(&achan->vc.lock, flags);
-+
-+ vd = vchan_find_desc(&achan->vc, cookie);
-+ if (vd)
-+ residue = container_of(vd, struct adm_async_desc, vd)->length;
-+
-+ spin_unlock_irqrestore(&achan->vc.lock, flags);
-+
-+ /*
-+ * residue is either the full length if it is in the issued list, or 0
-+ * if it is in progress. We have no reliable way of determining
-+ * anything inbetween
-+ */
-+ dma_set_residue(txstate, residue);
-+
-+ if (achan->error)
-+ return DMA_ERROR;
-+
-+ return ret;
-+}
-+
-+/**
-+ * adm_issue_pending - starts pending transactions
-+ * @chan: dma channel
-+ *
-+ * Issues all pending transactions and starts DMA
-+ */
-+static void adm_issue_pending(struct dma_chan *chan)
-+{
-+ struct adm_chan *achan = to_adm_chan(chan);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&achan->vc.lock, flags);
-+
-+ if (vchan_issue_pending(&achan->vc) && !achan->curr_txd)
-+ adm_start_dma(achan);
-+ spin_unlock_irqrestore(&achan->vc.lock, flags);
-+}
-+
-+/**
-+ * adm_dma_free_desc - free descriptor memory
-+ * @vd: virtual descriptor
-+ *
-+ */
-+static void adm_dma_free_desc(struct virt_dma_desc *vd)
-+{
-+ struct adm_async_desc *async_desc = container_of(vd,
-+ struct adm_async_desc, vd);
-+
-+ dma_unmap_single(async_desc->adev->dev, async_desc->dma_addr,
-+ async_desc->dma_len, DMA_TO_DEVICE);
-+ kfree(async_desc->cpl);
-+ kfree(async_desc);
-+}
-+
-+static void adm_channel_init(struct adm_device *adev, struct adm_chan *achan,
-+ u32 index)
-+{
-+ achan->id = index;
-+ achan->adev = adev;
-+
-+ vchan_init(&achan->vc, &adev->common);
-+ achan->vc.desc_free = adm_dma_free_desc;
-+}
-+
-+static int adm_dma_probe(struct platform_device *pdev)
-+{
-+ struct adm_device *adev;
-+ struct resource *iores;
-+ int ret;
-+ u32 i;
-+
-+ adev = devm_kzalloc(&pdev->dev, sizeof(*adev), GFP_KERNEL);
-+ if (!adev)
-+ return -ENOMEM;
-+
-+ adev->dev = &pdev->dev;
-+
-+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ adev->regs = devm_ioremap_resource(&pdev->dev, iores);
-+ if (IS_ERR(adev->regs))
-+ return PTR_ERR(adev->regs);
-+
-+ adev->irq = platform_get_irq(pdev, 0);
-+ if (adev->irq < 0)
-+ return adev->irq;
-+
-+ ret = of_property_read_u32(pdev->dev.of_node, "qcom,ee", &adev->ee);
-+ if (ret) {
-+ dev_err(adev->dev, "Execution environment unspecified\n");
-+ return ret;
-+ }
-+
-+ adev->core_clk = devm_clk_get(adev->dev, "core");
-+ if (IS_ERR(adev->core_clk))
-+ return PTR_ERR(adev->core_clk);
-+
-+ ret = clk_prepare_enable(adev->core_clk);
-+ if (ret) {
-+ dev_err(adev->dev, "failed to prepare/enable core clock\n");
-+ return ret;
-+ }
-+
-+ adev->iface_clk = devm_clk_get(adev->dev, "iface");
-+ if (IS_ERR(adev->iface_clk)) {
-+ ret = PTR_ERR(adev->iface_clk);
-+ goto err_disable_core_clk;
-+ }
-+
-+ ret = clk_prepare_enable(adev->iface_clk);
-+ if (ret) {
-+ dev_err(adev->dev, "failed to prepare/enable iface clock\n");
-+ goto err_disable_core_clk;
-+ }
-+
-+ adev->clk_reset = devm_reset_control_get(&pdev->dev, "clk");
-+ if (IS_ERR(adev->clk_reset)) {
-+ dev_err(adev->dev, "failed to get ADM0 reset\n");
-+ ret = PTR_ERR(adev->clk_reset);
-+ goto err_disable_clks;
-+ }
-+
-+ adev->c0_reset = devm_reset_control_get(&pdev->dev, "c0");
-+ if (IS_ERR(adev->c0_reset)) {
-+ dev_err(adev->dev, "failed to get ADM0 C0 reset\n");
-+ ret = PTR_ERR(adev->c0_reset);
-+ goto err_disable_clks;
-+ }
-+
-+ adev->c1_reset = devm_reset_control_get(&pdev->dev, "c1");
-+ if (IS_ERR(adev->c1_reset)) {
-+ dev_err(adev->dev, "failed to get ADM0 C1 reset\n");
-+ ret = PTR_ERR(adev->c1_reset);
-+ goto err_disable_clks;
-+ }
-+
-+ adev->c2_reset = devm_reset_control_get(&pdev->dev, "c2");
-+ if (IS_ERR(adev->c2_reset)) {
-+ dev_err(adev->dev, "failed to get ADM0 C2 reset\n");
-+ ret = PTR_ERR(adev->c2_reset);
-+ goto err_disable_clks;
-+ }
-+
-+ reset_control_assert(adev->clk_reset);
-+ reset_control_assert(adev->c0_reset);
-+ reset_control_assert(adev->c1_reset);
-+ reset_control_assert(adev->c2_reset);
-+
-+ reset_control_deassert(adev->clk_reset);
-+ reset_control_deassert(adev->c0_reset);
-+ reset_control_deassert(adev->c1_reset);
-+ reset_control_deassert(adev->c2_reset);
-+
-+ adev->channels = devm_kcalloc(adev->dev, ADM_MAX_CHANNELS,
-+ sizeof(*adev->channels), GFP_KERNEL);
-+
-+ if (!adev->channels) {
-+ ret = -ENOMEM;
-+ goto err_disable_clks;
-+ }
-+
-+ /* allocate and initialize channels */
-+ INIT_LIST_HEAD(&adev->common.channels);
-+
-+ for (i = 0; i < ADM_MAX_CHANNELS; i++)
-+ adm_channel_init(adev, &adev->channels[i], i);
-+
-+ /* reset CRCIs */
-+ for (i = 0; i < 16; i++)
-+ writel(ADM_CRCI_CTL_RST, adev->regs +
-+ ADM_CRCI_CTL(i, adev->ee));
-+
-+ /* configure client interfaces */
-+ writel(ADM_CI_RANGE_START(0x40) | ADM_CI_RANGE_END(0xb0) |
-+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(0));
-+ writel(ADM_CI_RANGE_START(0x2a) | ADM_CI_RANGE_END(0x2c) |
-+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(1));
-+ writel(ADM_CI_RANGE_START(0x12) | ADM_CI_RANGE_END(0x28) |
-+ ADM_CI_BURST_8_WORDS, adev->regs + ADM_CI_CONF(2));
-+ writel(ADM_GP_CTL_LP_EN | ADM_GP_CTL_LP_CNT(0xf),
-+ adev->regs + ADM_GP_CTL);
-+
-+ ret = devm_request_irq(adev->dev, adev->irq, adm_dma_irq,
-+ 0, "adm_dma", adev);
-+ if (ret)
-+ goto err_disable_clks;
-+
-+ platform_set_drvdata(pdev, adev);
-+
-+ adev->common.dev = adev->dev;
-+ adev->common.dev->dma_parms = &adev->dma_parms;
-+
-+ /* set capabilities */
-+ dma_cap_zero(adev->common.cap_mask);
-+ dma_cap_set(DMA_SLAVE, adev->common.cap_mask);
-+ dma_cap_set(DMA_PRIVATE, adev->common.cap_mask);
-+
-+ /* initialize dmaengine apis */
-+ adev->common.directions = BIT(DMA_DEV_TO_MEM | DMA_MEM_TO_DEV);
-+ adev->common.residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
-+ adev->common.src_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+ adev->common.dst_addr_widths = DMA_SLAVE_BUSWIDTH_4_BYTES;
-+ adev->common.device_free_chan_resources = adm_free_chan;
-+ adev->common.device_prep_slave_sg = adm_prep_slave_sg;
-+ adev->common.device_issue_pending = adm_issue_pending;
-+ adev->common.device_tx_status = adm_tx_status;
-+ adev->common.device_terminate_all = adm_terminate_all;
-+ adev->common.device_config = adm_slave_config;
-+
-+ ret = dma_async_device_register(&adev->common);
-+ if (ret) {
-+ dev_err(adev->dev, "failed to register dma async device\n");
-+ goto err_disable_clks;
-+ }
-+
-+ ret = of_dma_controller_register(pdev->dev.of_node,
-+ of_dma_xlate_by_chan_id,
-+ &adev->common);
-+ if (ret)
-+ goto err_unregister_dma;
-+
-+ return 0;
-+
-+err_unregister_dma:
-+ dma_async_device_unregister(&adev->common);
-+err_disable_clks:
-+ clk_disable_unprepare(adev->iface_clk);
-+err_disable_core_clk:
-+ clk_disable_unprepare(adev->core_clk);
-+
-+ return ret;
-+}
-+
-+static int adm_dma_remove(struct platform_device *pdev)
-+{
-+ struct adm_device *adev = platform_get_drvdata(pdev);
-+ struct adm_chan *achan;
-+ u32 i;
-+
-+ of_dma_controller_free(pdev->dev.of_node);
-+ dma_async_device_unregister(&adev->common);
-+
-+ for (i = 0; i < ADM_MAX_CHANNELS; i++) {
-+ achan = &adev->channels[i];
-+
-+ /* mask IRQs for this channel/EE pair */
-+ writel(0, adev->regs + ADM_CH_RSLT_CONF(achan->id, adev->ee));
-+
-+ adm_terminate_all(&adev->channels[i].vc.chan);
-+ }
-+
-+ devm_free_irq(adev->dev, adev->irq, adev);
-+
-+ clk_disable_unprepare(adev->core_clk);
-+ clk_disable_unprepare(adev->iface_clk);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id adm_of_match[] = {
-+ { .compatible = "qcom,adm", },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, adm_of_match);
-+
-+static struct platform_driver adm_dma_driver = {
-+ .probe = adm_dma_probe,
-+ .remove = adm_dma_remove,
-+ .driver = {
-+ .name = "adm-dma-engine",
-+ .of_match_table = adm_of_match,
-+ },
-+};
-+
-+module_platform_driver(adm_dma_driver);
-+
-+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
-+MODULE_DESCRIPTION("QCOM ADM DMA engine driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch b/target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch
deleted file mode 100644
index b2a6afe0dd..0000000000
--- a/target/linux/ipq806x/patches-4.14/0030-clk-Disable-i2c-device-on-gsbi4.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 0c974b87829e007dc4fae94e20d488204e20e662 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 9 Mar 2017 08:16:10 +0100
-Subject: [PATCH 30/69] clk: Disable i2c device on gsbi4
-
-This patch was not annotated and comes from the v4.4 tree.
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/clk/qcom/gcc-ipq806x.c | 5 +++--
- 1 file changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -294,7 +294,7 @@ static struct clk_rcg gsbi1_uart_src = {
- .parent_names = gcc_pxo_pll8,
- .num_parents = 2,
- .ops = &clk_rcg_ops,
-- .flags = CLK_SET_PARENT_GATE,
-+ .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
- },
- },
- };
-@@ -312,7 +312,7 @@ static struct clk_branch gsbi1_uart_clk
- },
- .num_parents = 1,
- .ops = &clk_branch_ops,
-- .flags = CLK_SET_RATE_PARENT,
-+ .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
- },
- },
- };
-@@ -890,6 +890,7 @@ static struct clk_branch gsbi1_h_clk = {
- .hw.init = &(struct clk_init_data){
- .name = "gsbi1_h_clk",
- .ops = &clk_branch_ops,
-+ .flags = CLK_IGNORE_UNUSED,
- },
- },
- };
diff --git a/target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch b/target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch
deleted file mode 100644
index a7cfac5447..0000000000
--- a/target/linux/ipq806x/patches-4.14/0031-mtd-add-SMEM-parser-for-QCOM-platforms.patch
+++ /dev/null
@@ -1,282 +0,0 @@
-From d8eeb4de90e968ba32d956728c866f20752cf2c3 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Thu, 9 Mar 2017 08:18:08 +0100
-Subject: [PATCH 31/69] mtd: add SMEM parser for QCOM platforms
-
-On QCOM platforms using MTD devices storage (such as IPQ806x), SMEM is
-used to store partition layout. This new parser can now be used to read
-SMEM and use it to register an MTD layout according to its content.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
-Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
----
- drivers/mtd/Kconfig | 7 ++
- drivers/mtd/Makefile | 1 +
- drivers/mtd/qcom_smem_part.c | 228 +++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 236 insertions(+)
- create mode 100644 drivers/mtd/qcom_smem_part.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -194,6 +194,13 @@ config MTD_MYLOADER_PARTS
- You will still need the parsing functions to be called by the driver
- for your particular device. It won't happen automatically.
-
-+config MTD_QCOM_SMEM_PARTS
-+ tristate "QCOM SMEM partitioning support"
-+ depends on QCOM_SMEM
-+ help
-+ This provides partitions parser for QCOM devices using SMEM
-+ such as IPQ806x.
-+
- comment "User Modules And Translation Layers"
-
- #
---- /dev/null
-+++ b/drivers/mtd/qcom_smem_part.c
-@@ -0,0 +1,235 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/device.h>
-+#include <linux/slab.h>
-+
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/spi/spi.h>
-+#include <linux/module.h>
-+
-+#include <linux/soc/qcom/smem.h>
-+
-+/* Processor/host identifier for the application processor */
-+#define SMEM_HOST_APPS 0
-+
-+/* SMEM items index */
-+#define SMEM_AARM_PARTITION_TABLE 9
-+#define SMEM_BOOT_FLASH_TYPE 421
-+#define SMEM_BOOT_FLASH_BLOCK_SIZE 424
-+
-+/* SMEM Flash types */
-+#define SMEM_FLASH_NAND 2
-+#define SMEM_FLASH_SPI 6
-+
-+#define SMEM_PART_NAME_SZ 16
-+#define SMEM_PARTS_MAX 32
-+
-+struct smem_partition {
-+ char name[SMEM_PART_NAME_SZ];
-+ __le32 start;
-+ __le32 size;
-+ __le32 attr;
-+};
-+
-+struct smem_partition_table {
-+ u8 magic[8];
-+ __le32 version;
-+ __le32 len;
-+ struct smem_partition parts[SMEM_PARTS_MAX];
-+};
-+
-+/* SMEM Magic values in partition table */
-+static const u8 SMEM_PTABLE_MAGIC[] = {
-+ 0xaa, 0x73, 0xee, 0x55,
-+ 0xdb, 0xbd, 0x5e, 0xe3,
-+};
-+
-+static int qcom_smem_get_flash_blksz(u64 **smem_blksz)
-+{
-+ size_t size;
-+
-+ *smem_blksz = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_BLOCK_SIZE,
-+ &size);
-+
-+ if (IS_ERR(*smem_blksz)) {
-+ pr_err("Unable to read flash blksz from SMEM\n");
-+ return -ENOENT;
-+ }
-+
-+ if (size != sizeof(**smem_blksz)) {
-+ pr_err("Invalid flash blksz size in SMEM\n");
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int qcom_smem_get_flash_type(u64 **smem_flash_type)
-+{
-+ size_t size;
-+
-+ *smem_flash_type = qcom_smem_get(SMEM_HOST_APPS, SMEM_BOOT_FLASH_TYPE,
-+ &size);
-+
-+ if (IS_ERR(*smem_flash_type)) {
-+ pr_err("Unable to read flash type from SMEM\n");
-+ return -ENOENT;
-+ }
-+
-+ if (size != sizeof(**smem_flash_type)) {
-+ pr_err("Invalid flash type size in SMEM\n");
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+static int qcom_smem_get_flash_partitions(struct smem_partition_table **pparts)
-+{
-+ size_t size;
-+
-+ *pparts = qcom_smem_get(SMEM_HOST_APPS, SMEM_AARM_PARTITION_TABLE,
-+ &size);
-+
-+ if (IS_ERR(*pparts)) {
-+ pr_err("Unable to read partition table from SMEM\n");
-+ return -ENOENT;
-+ }
-+
-+ return 0;
-+}
-+
-+static int of_dev_node_match(struct device *dev, void *data)
-+{
-+ return dev->of_node == data;
-+}
-+
-+static bool is_spi_device(struct device_node *np)
-+{
-+ struct device *dev;
-+
-+ dev = bus_find_device(&spi_bus_type, NULL, np, of_dev_node_match);
-+ if (!dev)
-+ return false;
-+
-+ put_device(dev);
-+ return true;
-+}
-+
-+static int parse_qcom_smem_partitions(struct mtd_info *master,
-+ const struct mtd_partition **pparts,
-+ struct mtd_part_parser_data *data)
-+{
-+ struct smem_partition_table *smem_parts;
-+ u64 *smem_flash_type, *smem_blksz;
-+ struct mtd_partition *mtd_parts;
-+ struct device_node *of_node = master->dev.of_node;
-+ int i, ret;
-+
-+ /*
-+ * SMEM will only store the partition table of the boot device.
-+ * If this is not the boot device, do not return any partition.
-+ */
-+ ret = qcom_smem_get_flash_type(&smem_flash_type);
-+ if (ret < 0)
-+ return ret;
-+
-+ if ((*smem_flash_type == SMEM_FLASH_NAND && !mtd_type_is_nand(master))
-+ || (*smem_flash_type == SMEM_FLASH_SPI && !is_spi_device(of_node)))
-+ return 0;
-+
-+ /*
-+ * Just for sanity purpose, make sure the block size in SMEM matches the
-+ * block size of the MTD device
-+ */
-+ ret = qcom_smem_get_flash_blksz(&smem_blksz);
-+ if (ret < 0)
-+ return ret;
-+
-+ if (*smem_blksz != master->erasesize) {
-+ pr_err("SMEM block size differs from MTD block size\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Get partition pointer from SMEM */
-+ ret = qcom_smem_get_flash_partitions(&smem_parts);
-+ if (ret < 0)
-+ return ret;
-+
-+ if (memcmp(SMEM_PTABLE_MAGIC, smem_parts->magic,
-+ sizeof(SMEM_PTABLE_MAGIC))) {
-+ pr_err("SMEM partition magic invalid\n");
-+ return -EINVAL;
-+ }
-+
-+ /* Allocate and populate the mtd structures */
-+ mtd_parts = kcalloc(le32_to_cpu(smem_parts->len), sizeof(*mtd_parts),
-+ GFP_KERNEL);
-+ if (!mtd_parts)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < smem_parts->len; i++) {
-+ struct smem_partition *s_part = &smem_parts->parts[i];
-+ struct mtd_partition *m_part = &mtd_parts[i];
-+
-+ m_part->name = s_part->name;
-+ m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
-+ m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
-+
-+ /*
-+ * The last SMEM partition may have its size marked as
-+ * something like 0xffffffff, which means "until the end of the
-+ * flash device". In this case, truncate it.
-+ */
-+ if (m_part->offset + m_part->size > master->size)
-+ m_part->size = master->size - m_part->offset;
-+ }
-+
-+ *pparts = mtd_parts;
-+
-+ return smem_parts->len;
-+}
-+
-+static const struct of_device_id qcom_smem_of_match_table[] = {
-+ { .compatible = "qcom,smem" },
-+ {},
-+};
-+MODULE_DEVICE_TABLE(of, qcom_smem_of_match_table);
-+
-+static struct mtd_part_parser qcom_smem_parser = {
-+ .owner = THIS_MODULE,
-+ .parse_fn = parse_qcom_smem_partitions,
-+ .name = "qcom-smem",
-+ .of_match_table = qcom_smem_of_match_table,
-+};
-+
-+static int __init qcom_smem_parser_init(void)
-+{
-+ register_mtd_parser(&qcom_smem_parser);
-+ return 0;
-+}
-+
-+static void __exit qcom_smem_parser_exit(void)
-+{
-+ deregister_mtd_parser(&qcom_smem_parser);
-+}
-+
-+module_init(qcom_smem_parser_init);
-+module_exit(qcom_smem_parser_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Mathieu Olivari <mathieu@codeaurora.org>");
-+MODULE_DESCRIPTION("Parsing code for SMEM based partition tables");
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o
- obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o
- obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
-+obj-$(CONFIG_MTD_QCOM_SMEM_PARTS) += qcom_smem_part.o
- obj-y += parsers/
-
- # 'Users' - code which presents functionality to userspace.
diff --git a/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch b/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch
deleted file mode 100644
index e430329acd..0000000000
--- a/target/linux/ipq806x/patches-4.14/0032-phy-add-qcom-dwc3-phy.patch
+++ /dev/null
@@ -1,616 +0,0 @@
-From b9004f4fd23e4c614d71c972f3a9311665480e29 Mon Sep 17 00:00:00 2001
-From: Andy Gross <agross@codeaurora.org>
-Date: Thu, 9 Mar 2017 08:19:18 +0100
-Subject: [PATCH 32/69] phy: add qcom dwc3 phy
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
----
- drivers/phy/Kconfig | 12 +
- drivers/phy/Makefile | 1 +
- drivers/phy/phy-qcom-dwc3.c | 575 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 588 insertions(+)
- create mode 100644 drivers/phy/phy-qcom-dwc3.c
-
---- a/drivers/phy/qualcomm/Kconfig
-+++ b/drivers/phy/qualcomm/Kconfig
-@@ -56,3 +56,15 @@ config PHY_QCOM_USB_HSIC
- select GENERIC_PHY
- help
- Support for the USB HSIC ULPI compliant PHY on QCOM chipsets.
-+
-+config PHY_QCOM_DWC3
-+ tristate "QCOM DWC3 USB PHY support"
-+ depends on ARCH_QCOM
-+ depends on HAS_IOMEM
-+ depends on OF
-+ select GENERIC_PHY
-+ help
-+ This option enables support for the Synopsis PHYs present inside the
-+ Qualcomm USB3.0 DWC3 controller. This driver supports both HS and SS
-+ PHY controllers.
-+
---- a/drivers/phy/qualcomm/Makefile
-+++ b/drivers/phy/qualcomm/Makefile
-@@ -8,3 +8,4 @@ obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-
- obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o
- obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
- obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
-+obj-$(CONFIG_PHY_QCOM_DWC3) += phy-qcom-dwc3.o
---- /dev/null
-+++ b/drivers/phy/qualcomm/phy-qcom-dwc3.c
-@@ -0,0 +1,575 @@
-+/* Copyright (c) 2014-2015, Code Aurora Forum. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+* This program is distributed in the hope that it will be useful,
-+* but WITHOUT ANY WARRANTY; without even the implied warranty of
-+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+* GNU General Public License for more details.
-+*/
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/phy/phy.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+
-+/**
-+ * USB QSCRATCH Hardware registers
-+ */
-+#define QSCRATCH_GENERAL_CFG (0x08)
-+#define HSUSB_PHY_CTRL_REG (0x10)
-+
-+/* PHY_CTRL_REG */
-+#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24)
-+#define HSUSB_CTRL_USB2_SUSPEND BIT(23)
-+#define HSUSB_CTRL_UTMI_CLK_EN BIT(21)
-+#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20)
-+#define HSUSB_CTRL_USE_CLKCORE BIT(18)
-+#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17)
-+#define HSUSB_CTRL_COMMONONN BIT(11)
-+#define HSUSB_CTRL_ID_HV_CLAMP BIT(9)
-+#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8)
-+#define HSUSB_CTRL_CLAMP_EN BIT(7)
-+#define HSUSB_CTRL_RETENABLEN BIT(1)
-+#define HSUSB_CTRL_POR BIT(0)
-+
-+/* QSCRATCH_GENERAL_CFG */
-+#define HSUSB_GCFG_XHCI_REV BIT(2)
-+
-+/**
-+ * USB QSCRATCH Hardware registers
-+ */
-+#define SSUSB_PHY_CTRL_REG (0x00)
-+#define SSUSB_PHY_PARAM_CTRL_1 (0x04)
-+#define SSUSB_PHY_PARAM_CTRL_2 (0x08)
-+#define CR_PROTOCOL_DATA_IN_REG (0x0c)
-+#define CR_PROTOCOL_DATA_OUT_REG (0x10)
-+#define CR_PROTOCOL_CAP_ADDR_REG (0x14)
-+#define CR_PROTOCOL_CAP_DATA_REG (0x18)
-+#define CR_PROTOCOL_READ_REG (0x1c)
-+#define CR_PROTOCOL_WRITE_REG (0x20)
-+
-+/* PHY_CTRL_REG */
-+#define SSUSB_CTRL_REF_USE_PAD BIT(28)
-+#define SSUSB_CTRL_TEST_POWERDOWN BIT(27)
-+#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24)
-+#define SSUSB_CTRL_SS_PHY_EN BIT(8)
-+#define SSUSB_CTRL_SS_PHY_RESET BIT(7)
-+
-+/* SSPHY control registers */
-+#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * lane)
-+#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * lane)
-+
-+/* SSPHY SoC version specific values */
-+#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */
-+#define SSPHY_TX_DEEMPH_3_5DB 23 /* Override value for transmit
-+ preemphasis */
-+#define SSPHY_MPLL_VALUE 0 /* Override value for mpll */
-+
-+/* QSCRATCH PHY_PARAM_CTRL1 fields */
-+#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK 0x07f00000u
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK 0x000fc000u
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK 0x00003f00u
-+#define PHY_PARAM_CTRL1_LOS_BIAS_MASK 0x000000f8u
-+
-+#define PHY_PARAM_CTRL1_MASK \
-+ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \
-+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \
-+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \
-+ PHY_PARAM_CTRL1_LOS_BIAS_MASK)
-+
-+#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \
-+ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \
-+ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
-+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \
-+ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
-+#define PHY_PARAM_CTRL1_LOS_BIAS(x) \
-+ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
-+
-+/* RX OVRD IN HI bits */
-+#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13)
-+#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12)
-+#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11)
-+#define RX_OVRD_IN_HI_RX_EQ_MASK 0x0700
-+#define RX_OVRD_IN_HI_RX_EQ_SHIFT 8
-+#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7)
-+#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6)
-+#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5)
-+#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK 0x0018
-+#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2)
-+#define RX_OVRD_IN_HI_RX_RATE_MASK 0x0003
-+
-+/* TX OVRD DRV LO register bits */
-+#define TX_OVRD_DRV_LO_AMPLITUDE_MASK 0x007F
-+#define TX_OVRD_DRV_LO_PREEMPH_MASK 0x3F80
-+#define TX_OVRD_DRV_LO_PREEMPH_SHIFT 7
-+#define TX_OVRD_DRV_LO_EN BIT(14)
-+
-+/* SS CAP register bits */
-+#define SS_CR_CAP_ADDR_REG BIT(0)
-+#define SS_CR_CAP_DATA_REG BIT(0)
-+#define SS_CR_READ_REG BIT(0)
-+#define SS_CR_WRITE_REG BIT(0)
-+
-+struct qcom_dwc3_usb_phy {
-+ void __iomem *base;
-+ struct device *dev;
-+ struct clk *xo_clk;
-+ struct clk *ref_clk;
-+ u32 rx_eq;
-+ u32 tx_deamp_3_5db;
-+ u32 mpll;
-+};
-+
-+struct qcom_dwc3_phy_drvdata {
-+ struct phy_ops ops;
-+ u32 clk_rate;
-+};
-+
-+/**
-+ * Write register and read back masked value to confirm it is written
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @offset - register offset.
-+ * @mask - register bitmask specifying what should be updated
-+ * @val - value to write.
-+ */
-+static inline void qcom_dwc3_phy_write_readback(
-+ struct qcom_dwc3_usb_phy *phy_dwc3, u32 offset,
-+ const u32 mask, u32 val)
-+{
-+ u32 write_val, tmp = readl(phy_dwc3->base + offset);
-+
-+ tmp &= ~mask; /* retain other bits */
-+ write_val = tmp | val;
-+
-+ writel(write_val, phy_dwc3->base + offset);
-+
-+ /* Read back to see if val was written */
-+ tmp = readl(phy_dwc3->base + offset);
-+ tmp &= mask; /* clear other bits */
-+
-+ if (tmp != val)
-+ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n",
-+ val, offset);
-+}
-+
-+static int wait_for_latch(void __iomem *addr)
-+{
-+ u32 retry = 10;
-+
-+ while (true) {
-+ if (!readl(addr))
-+ break;
-+
-+ if (--retry == 0)
-+ return -ETIMEDOUT;
-+
-+ usleep_range(10, 20);
-+ }
-+
-+ return 0;
-+}
-+
-+/**
-+ * Write SSPHY register
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @addr - SSPHY address to write.
-+ * @val - value to write.
-+ */
-+static int qcom_dwc3_ss_write_phycreg(struct qcom_dwc3_usb_phy *phy_dwc3,
-+ u32 addr, u32 val)
-+{
-+ int ret;
-+
-+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
-+ writel(SS_CR_CAP_ADDR_REG, phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
-+ writel(SS_CR_CAP_DATA_REG, phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
-+
-+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
-+
-+err_wait:
-+ if (ret)
-+ dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
-+ return ret;
-+}
-+
-+/**
-+ * Read SSPHY register.
-+ *
-+ * @base - QCOM DWC3 PHY base virtual address.
-+ * @addr - SSPHY address to read.
-+ */
-+static int qcom_dwc3_ss_read_phycreg(void __iomem *base, u32 addr, u32 *val)
-+{
-+ int ret;
-+
-+ writel(addr, base + CR_PROTOCOL_DATA_IN_REG);
-+ writel(SS_CR_CAP_ADDR_REG, base + CR_PROTOCOL_CAP_ADDR_REG);
-+
-+ ret = wait_for_latch(base + CR_PROTOCOL_CAP_ADDR_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ /*
-+ * Due to hardware bug, first read of SSPHY register might be
-+ * incorrect. Hence as workaround, SW should perform SSPHY register
-+ * read twice, but use only second read and ignore first read.
-+ */
-+ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG);
-+
-+ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ /* throwaway read */
-+ readl(base + CR_PROTOCOL_DATA_OUT_REG);
-+
-+ writel(SS_CR_READ_REG, base + CR_PROTOCOL_READ_REG);
-+
-+ ret = wait_for_latch(base + CR_PROTOCOL_READ_REG);
-+ if (ret)
-+ goto err_wait;
-+
-+ *val = readl(base + CR_PROTOCOL_DATA_OUT_REG);
-+
-+err_wait:
-+ return ret;
-+}
-+
-+static int qcom_dwc3_hs_phy_init(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+ int ret;
-+ u32 val;
-+
-+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
-+ if (ret) {
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+ return ret;
-+ }
-+
-+ /*
-+ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
-+ * enable clamping, and disable RETENTION (power-on default is ENABLED)
-+ */
-+ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
-+ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN |
-+ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
-+ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
-+ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
-+
-+ /* use core clock if external reference is not present */
-+ if (!phy_dwc3->xo_clk)
-+ val |= HSUSB_CTRL_USE_CLKCORE;
-+
-+ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
-+ usleep_range(2000, 2200);
-+
-+ /* Disable (bypass) VBUS and ID filters */
-+ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
-+
-+ return 0;
-+}
-+
-+static int qcom_dwc3_hs_phy_exit(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+ clk_disable_unprepare(phy_dwc3->ref_clk);
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+ return 0;
-+}
-+
-+static int qcom_dwc3_ss_phy_init(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+ int ret;
-+ u32 data = 0;
-+
-+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
-+ if (ret)
-+ return ret;
-+
-+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
-+ if (ret) {
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+ return ret;
-+ }
-+
-+ /* reset phy */
-+ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+ writel(data | SSUSB_CTRL_SS_PHY_RESET,
-+ phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+ usleep_range(2000, 2200);
-+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+
-+ /* clear REF_PAD if we don't have XO clk */
-+ if (!phy_dwc3->xo_clk)
-+ data &= ~SSUSB_CTRL_REF_USE_PAD;
-+ else
-+ data |= SSUSB_CTRL_REF_USE_PAD;
-+
-+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+
-+ /* wait for ref clk to become stable, this can take up to 30ms */
-+ msleep(30);
-+
-+ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
-+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
-+
-+ /*
-+ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
-+ * in HS mode instead of SS mode. Workaround it by asserting
-+ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
-+ */
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x102D, &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data |= (1 << 7);
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x102D, data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base, 0x1010, &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~0xff0;
-+ data |= 0x20;
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x1010, data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ /*
-+ * Fix RX Equalization setting as follows
-+ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
-+ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
-+ */
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
-+ SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
-+ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
-+ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
-+ data |= phy_dwc3->rx_eq << RX_OVRD_IN_HI_RX_EQ_SHIFT;
-+ data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
-+ SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ /*
-+ * Set EQ and TX launch amplitudes as follows
-+ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
-+ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
-+ * LANE0.TX_OVRD_DRV_LO.EN set to 1.
-+ */
-+ ret = qcom_dwc3_ss_read_phycreg(phy_dwc3->base,
-+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
-+ data |= phy_dwc3->tx_deamp_3_5db << TX_OVRD_DRV_LO_PREEMPH_SHIFT;
-+ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
-+ data |= 0x6E;
-+ data |= TX_OVRD_DRV_LO_EN;
-+ ret = qcom_dwc3_ss_write_phycreg(phy_dwc3,
-+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
-+ if (ret)
-+ goto err_phy_trans;
-+
-+ qcom_dwc3_ss_write_phycreg(phy_dwc3, 0x30, phy_dwc3->mpll);
-+
-+ /*
-+ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
-+ * TX_FULL_SWING [26:20] amplitude to 110
-+ * TX_DEEMPH_6DB [19:14] to 32
-+ * TX_DEEMPH_3_5DB [13:8] set based on SoC version
-+ * LOS_BIAS [7:3] to 9
-+ */
-+ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);
-+
-+ data &= ~PHY_PARAM_CTRL1_MASK;
-+
-+ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
-+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
-+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
-+ PHY_PARAM_CTRL1_LOS_BIAS(0x9);
-+
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
-+ PHY_PARAM_CTRL1_MASK, data);
-+
-+err_phy_trans:
-+ return ret;
-+}
-+
-+static int qcom_dwc3_ss_phy_exit(struct phy *phy)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3 = phy_get_drvdata(phy);
-+
-+ /* Sequence to put SSPHY in low power state:
-+ * 1. Clear REF_PHY_EN in PHY_CTRL_REG
-+ * 2. Clear REF_USE_PAD in PHY_CTRL_REG
-+ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
-+ */
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_SS_PHY_EN, 0x0);
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_REF_USE_PAD, 0x0);
-+ qcom_dwc3_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
-+ SSUSB_CTRL_TEST_POWERDOWN, 0x0);
-+
-+ clk_disable_unprepare(phy_dwc3->ref_clk);
-+ clk_disable_unprepare(phy_dwc3->xo_clk);
-+
-+ return 0;
-+}
-+
-+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_hs_drvdata = {
-+ .ops = {
-+ .init = qcom_dwc3_hs_phy_init,
-+ .exit = qcom_dwc3_hs_phy_exit,
-+ .owner = THIS_MODULE,
-+ },
-+ .clk_rate = 60000000,
-+};
-+
-+static const struct qcom_dwc3_phy_drvdata qcom_dwc3_ss_drvdata = {
-+ .ops = {
-+ .init = qcom_dwc3_ss_phy_init,
-+ .exit = qcom_dwc3_ss_phy_exit,
-+ .owner = THIS_MODULE,
-+ },
-+ .clk_rate = 125000000,
-+};
-+
-+static const struct of_device_id qcom_dwc3_phy_table[] = {
-+ { .compatible = "qcom,dwc3-hs-usb-phy", .data = &qcom_dwc3_hs_drvdata },
-+ { .compatible = "qcom,dwc3-ss-usb-phy", .data = &qcom_dwc3_ss_drvdata },
-+ { /* Sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, qcom_dwc3_phy_table);
-+
-+static int qcom_dwc3_phy_probe(struct platform_device *pdev)
-+{
-+ struct qcom_dwc3_usb_phy *phy_dwc3;
-+ struct phy_provider *phy_provider;
-+ struct phy *generic_phy;
-+ struct resource *res;
-+ const struct of_device_id *match;
-+ const struct qcom_dwc3_phy_drvdata *data;
-+ struct device_node *np;
-+
-+ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
-+ if (!phy_dwc3)
-+ return -ENOMEM;
-+
-+ match = of_match_node(qcom_dwc3_phy_table, pdev->dev.of_node);
-+ data = match->data;
-+
-+ phy_dwc3->dev = &pdev->dev;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ phy_dwc3->base = devm_ioremap_resource(phy_dwc3->dev, res);
-+ if (IS_ERR(phy_dwc3->base))
-+ return PTR_ERR(phy_dwc3->base);
-+
-+ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
-+ if (IS_ERR(phy_dwc3->ref_clk)) {
-+ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
-+ return PTR_ERR(phy_dwc3->ref_clk);
-+ }
-+
-+ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
-+
-+ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
-+ if (IS_ERR(phy_dwc3->xo_clk)) {
-+ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
-+ phy_dwc3->xo_clk = NULL;
-+ }
-+
-+ /* Parse device node to probe HSIO settings */
-+ np = of_node_get(pdev->dev.of_node);
-+ if (!of_compat_cmp(match->compatible, "qcom,dwc3-ss-usb-phy",
-+ strlen(match->compatible))) {
-+
-+ if (of_property_read_u32(np, "rx_eq", &phy_dwc3->rx_eq) ||
-+ of_property_read_u32(np, "tx_deamp_3_5db",
-+ &phy_dwc3->tx_deamp_3_5db) ||
-+ of_property_read_u32(np, "mpll", &phy_dwc3->mpll)) {
-+
-+ dev_err(phy_dwc3->dev, "cannot get HSIO settings from device node, using default values\n");
-+
-+ /* Default HSIO settings */
-+ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
-+ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
-+ phy_dwc3->mpll = SSPHY_MPLL_VALUE;
-+ }
-+ }
-+
-+ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node,
-+ &data->ops);
-+
-+ if (IS_ERR(generic_phy))
-+ return PTR_ERR(generic_phy);
-+
-+ phy_set_drvdata(generic_phy, phy_dwc3);
-+ platform_set_drvdata(pdev, phy_dwc3);
-+
-+ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
-+ of_phy_simple_xlate);
-+
-+ if (IS_ERR(phy_provider))
-+ return PTR_ERR(phy_provider);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver qcom_dwc3_phy_driver = {
-+ .probe = qcom_dwc3_phy_probe,
-+ .driver = {
-+ .name = "qcom-dwc3-usb-phy",
-+ .owner = THIS_MODULE,
-+ .of_match_table = qcom_dwc3_phy_table,
-+ },
-+};
-+
-+module_platform_driver(qcom_dwc3_phy_driver);
-+
-+MODULE_ALIAS("platform:phy-qcom-dwc3");
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
-+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
-+MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");
diff --git a/target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch b/target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
deleted file mode 100644
index a6c7953aaa..0000000000
--- a/target/linux/ipq806x/patches-4.14/0033-ARM-qcom-automatically-select-PCI_DOMAINS-if-PCI-is-.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 48051ece78136e4235a2415a52797db56f8a4478 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Tue, 21 Apr 2015 19:09:07 -0700
-Subject: [PATCH 33/69] ARM: qcom: automatically select PCI_DOMAINS if PCI is
- enabled
-
-If multiple PCIe devices are present in the system, the kernel will
-panic at boot time when trying to scan the PCI buses. This happens on
-IPQ806x based platforms, which has 3 PCIe ports.
-
-Enabling this option allows the kernel to assign the pci-domains
-according to the device-tree content. This allows multiple PCIe
-controllers to coexist in the system.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/mach-qcom/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/mach-qcom/Kconfig
-+++ b/arch/arm/mach-qcom/Kconfig
-@@ -6,6 +6,7 @@ menuconfig ARCH_QCOM
- select ARM_AMBA
- select PINCTRL
- select QCOM_SCM if SMP
-+ select PCI_DOMAINS if PCI
- help
- Support for Qualcomm's devicetree based systems.
-
diff --git a/target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch b/target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch
deleted file mode 100644
index 5380f2c7f9..0000000000
--- a/target/linux/ipq806x/patches-4.14/0034-ARM-Add-Krait-L2-register-accessor-functions.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-From patchwork Fri Dec 8 09:42:19 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v4,01/12] ARM: Add Krait L2 register accessor functions
-From: Sricharan R <sricharan@codeaurora.org>
-X-Patchwork-Id: 10102101
-Message-Id: <1512726150-7204-2-git-send-email-sricharan@codeaurora.org>
-To: mturquette@baylibre.com, sboyd@codeaurora.org,
- devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
-Cc: sricharan@codeaurora.org, Mark Rutland <mark.rutland@arm.com>,
- Russell King <linux@arm.linux.org.uk>,
- Courtney Cavin <courtney.cavin@sonymobile.com>
-Date: Fri, 8 Dec 2017 15:12:19 +0530
-
-From: Stephen Boyd <sboyd@codeaurora.org>
-
-Krait CPUs have a handful of L2 cache controller registers that
-live behind a cp15 based indirection register. First you program
-the indirection register (l2cpselr) to point the L2 'window'
-register (l2cpdr) at what you want to read/write. Then you
-read/write the 'window' register to do what you want. The
-l2cpselr register is not banked per-cpu so we must lock around
-accesses to it to prevent other CPUs from re-pointing l2cpdr
-underneath us.
-
-Cc: Mark Rutland <mark.rutland@arm.com>
-Cc: Russell King <linux@arm.linux.org.uk>
-Cc: Courtney Cavin <courtney.cavin@sonymobile.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- arch/arm/common/Kconfig | 3 ++
- arch/arm/common/Makefile | 1 +
- arch/arm/common/krait-l2-accessors.c | 58 +++++++++++++++++++++++++++++++
- arch/arm/include/asm/krait-l2-accessors.h | 20 +++++++++++
- 4 files changed, 82 insertions(+)
- create mode 100644 arch/arm/common/krait-l2-accessors.c
- create mode 100644 arch/arm/include/asm/krait-l2-accessors.h
-
---- a/arch/arm/common/Kconfig
-+++ b/arch/arm/common/Kconfig
-@@ -7,6 +7,9 @@ config DMABOUNCE
- bool
- select ZONE_DMA
-
-+config KRAIT_L2_ACCESSORS
-+ bool
-+
- config SHARP_LOCOMO
- bool
-
---- a/arch/arm/common/Makefile
-+++ b/arch/arm/common/Makefile
-@@ -7,6 +7,7 @@ obj-y += firmware.o
-
- obj-$(CONFIG_SA1111) += sa1111.o
- obj-$(CONFIG_DMABOUNCE) += dmabounce.o
-+obj-$(CONFIG_KRAIT_L2_ACCESSORS) += krait-l2-accessors.o
- obj-$(CONFIG_SHARP_LOCOMO) += locomo.o
- obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
- obj-$(CONFIG_SHARP_SCOOP) += scoop.o
---- /dev/null
-+++ b/arch/arm/common/krait-l2-accessors.c
-@@ -0,0 +1,58 @@
-+/*
-+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/spinlock.h>
-+#include <linux/export.h>
-+
-+#include <asm/barrier.h>
-+#include <asm/krait-l2-accessors.h>
-+
-+static DEFINE_RAW_SPINLOCK(krait_l2_lock);
-+
-+void krait_set_l2_indirect_reg(u32 addr, u32 val)
-+{
-+ unsigned long flags;
-+
-+ raw_spin_lock_irqsave(&krait_l2_lock, flags);
-+ /*
-+ * Select the L2 window by poking l2cpselr, then write to the window
-+ * via l2cpdr.
-+ */
-+ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
-+ isb();
-+ asm volatile ("mcr p15, 3, %0, c15, c0, 7 @ l2cpdr" : : "r" (val));
-+ isb();
-+
-+ raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
-+}
-+EXPORT_SYMBOL(krait_set_l2_indirect_reg);
-+
-+u32 krait_get_l2_indirect_reg(u32 addr)
-+{
-+ u32 val;
-+ unsigned long flags;
-+
-+ raw_spin_lock_irqsave(&krait_l2_lock, flags);
-+ /*
-+ * Select the L2 window by poking l2cpselr, then read from the window
-+ * via l2cpdr.
-+ */
-+ asm volatile ("mcr p15, 3, %0, c15, c0, 6 @ l2cpselr" : : "r" (addr));
-+ isb();
-+ asm volatile ("mrc p15, 3, %0, c15, c0, 7 @ l2cpdr" : "=r" (val));
-+
-+ raw_spin_unlock_irqrestore(&krait_l2_lock, flags);
-+
-+ return val;
-+}
-+EXPORT_SYMBOL(krait_get_l2_indirect_reg);
---- /dev/null
-+++ b/arch/arm/include/asm/krait-l2-accessors.h
-@@ -0,0 +1,20 @@
-+/*
-+ * Copyright (c) 2011-2013, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __ASMARM_KRAIT_L2_ACCESSORS_H
-+#define __ASMARM_KRAIT_L2_ACCESSORS_H
-+
-+extern void krait_set_l2_indirect_reg(u32 addr, u32 val);
-+extern u32 krait_get_l2_indirect_reg(u32 addr);
-+
-+#endif
diff --git a/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch b/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch
deleted file mode 100644
index e65ca02980..0000000000
--- a/target/linux/ipq806x/patches-4.14/0035-clk-mux-Split-out-register-accessors-for-reuse.patch
+++ /dev/null
@@ -1,195 +0,0 @@
-From patchwork Fri Dec 8 09:42:20 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v4,02/12] clk: mux: Split out register accessors for reuse
-From: Sricharan R <sricharan@codeaurora.org>
-X-Patchwork-Id: 10102103
-Message-Id: <1512726150-7204-3-git-send-email-sricharan@codeaurora.org>
-To: mturquette@baylibre.com, sboyd@codeaurora.org,
- devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
-Cc: sricharan@codeaurora.org
-Date: Fri, 8 Dec 2017 15:12:20 +0530
-
-From: Stephen Boyd <sboyd@codeaurora.org>
-
-We want to reuse the logic in clk-mux.c for other clock drivers
-that don't use readl as register accessors. Fortunately, there
-really isn't much to the mux code besides the table indirection
-and quirk flags if you assume any bit shifting and masking has
-been done already. Pull that logic out into reusable functions
-that operate on an optional table and some flags so that other
-drivers can use the same logic.
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/clk-mux.c | 75 +++++++++++++++++++++++++++-----------------
- include/linux/clk-provider.h | 9 ++++--
- 2 files changed, 54 insertions(+), 30 deletions(-)
-
---- a/drivers/clk/clk-mux.c
-+++ b/drivers/clk/clk-mux.c
-@@ -26,35 +26,24 @@
- * parent - parent is adjustable through clk_set_parent
- */
-
--static u8 clk_mux_get_parent(struct clk_hw *hw)
-+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
-+ unsigned int *table, unsigned long flags)
- {
-- struct clk_mux *mux = to_clk_mux(hw);
- int num_parents = clk_hw_get_num_parents(hw);
-- u32 val;
--
-- /*
-- * FIXME need a mux-specific flag to determine if val is bitwise or numeric
-- * e.g. sys_clkin_ck's clksel field is 3 bits wide, but ranges from 0x1
-- * to 0x7 (index starts at one)
-- * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
-- * val = 0x4 really means "bit 2, index starts at bit 0"
-- */
-- val = clk_readl(mux->reg) >> mux->shift;
-- val &= mux->mask;
-
-- if (mux->table) {
-+ if (table) {
- int i;
-
- for (i = 0; i < num_parents; i++)
-- if (mux->table[i] == val)
-+ if (table[i] == val)
- return i;
- return -EINVAL;
- }
-
-- if (val && (mux->flags & CLK_MUX_INDEX_BIT))
-+ if (val && (flags & CLK_MUX_INDEX_BIT))
- val = ffs(val) - 1;
-
-- if (val && (mux->flags & CLK_MUX_INDEX_ONE))
-+ if (val && (flags & CLK_MUX_INDEX_ONE))
- val--;
-
- if (val >= num_parents)
-@@ -62,23 +51,53 @@ static u8 clk_mux_get_parent(struct clk_
-
- return val;
- }
-+EXPORT_SYMBOL_GPL(clk_mux_get_parent);
-
--static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
-+static u8 _clk_mux_get_parent(struct clk_hw *hw)
- {
- struct clk_mux *mux = to_clk_mux(hw);
- u32 val;
-- unsigned long flags = 0;
-
-- if (mux->table) {
-- index = mux->table[index];
-+ /*
-+ * FIXME need a mux-specific flag to determine if val is bitwise or
-+ * numeric e.g. sys_clkin_ck's clksel field is 3 bits wide,
-+ * but ranges from 0x1 to 0x7 (index starts at one)
-+ * OTOH, pmd_trace_clk_mux_ck uses a separate bit for each clock, so
-+ * val = 0x4 really means "bit 2, index starts at bit 0"
-+ */
-+ val = clk_readl(mux->reg) >> mux->shift;
-+ val &= mux->mask;
-+
-+ return clk_mux_get_parent(hw, val, mux->table, mux->flags);
-+}
-+
-+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
-+ unsigned long flags)
-+{
-+ unsigned int val = index;
-+
-+ if (table) {
-+ val = table[val];
- } else {
-- if (mux->flags & CLK_MUX_INDEX_BIT)
-- index = 1 << index;
-+ if (flags & CLK_MUX_INDEX_BIT)
-+ val = 1 << index;
-
-- if (mux->flags & CLK_MUX_INDEX_ONE)
-- index++;
-+ if (flags & CLK_MUX_INDEX_ONE)
-+ val++;
- }
-
-+ return val;
-+}
-+EXPORT_SYMBOL_GPL(clk_mux_reindex);
-+
-+static int clk_mux_set_parent(struct clk_hw *hw, u8 index)
-+{
-+ struct clk_mux *mux = to_clk_mux(hw);
-+ u32 val;
-+ unsigned long flags = 0;
-+
-+ index = clk_mux_reindex(index, mux->table, mux->flags);
-+
- if (mux->lock)
- spin_lock_irqsave(mux->lock, flags);
- else
-@@ -110,14 +129,14 @@ static int clk_mux_determine_rate(struct
- }
-
- const struct clk_ops clk_mux_ops = {
-- .get_parent = clk_mux_get_parent,
-+ .get_parent = _clk_mux_get_parent,
- .set_parent = clk_mux_set_parent,
- .determine_rate = clk_mux_determine_rate,
- };
- EXPORT_SYMBOL_GPL(clk_mux_ops);
-
- const struct clk_ops clk_mux_ro_ops = {
-- .get_parent = clk_mux_get_parent,
-+ .get_parent = _clk_mux_get_parent,
- };
- EXPORT_SYMBOL_GPL(clk_mux_ro_ops);
-
-@@ -125,7 +144,7 @@ struct clk_hw *clk_hw_register_mux_table
- const char * const *parent_names, u8 num_parents,
- unsigned long flags,
- void __iomem *reg, u8 shift, u32 mask,
-- u8 clk_mux_flags, u32 *table, spinlock_t *lock)
-+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock)
- {
- struct clk_mux *mux;
- struct clk_hw *hw;
---- a/include/linux/clk-provider.h
-+++ b/include/linux/clk-provider.h
-@@ -468,7 +468,7 @@ void clk_hw_unregister_divider(struct cl
- struct clk_mux {
- struct clk_hw hw;
- void __iomem *reg;
-- u32 *table;
-+ unsigned int *table;
- u32 mask;
- u8 shift;
- u8 flags;
-@@ -486,6 +486,11 @@ struct clk_mux {
- extern const struct clk_ops clk_mux_ops;
- extern const struct clk_ops clk_mux_ro_ops;
-
-+unsigned int clk_mux_get_parent(struct clk_hw *hw, unsigned int val,
-+ unsigned int *table, unsigned long flags);
-+unsigned int clk_mux_reindex(u8 index, unsigned int *table,
-+ unsigned long flags);
-+
- struct clk *clk_register_mux(struct device *dev, const char *name,
- const char * const *parent_names, u8 num_parents,
- unsigned long flags,
-@@ -506,7 +511,7 @@ struct clk_hw *clk_hw_register_mux_table
- const char * const *parent_names, u8 num_parents,
- unsigned long flags,
- void __iomem *reg, u8 shift, u32 mask,
-- u8 clk_mux_flags, u32 *table, spinlock_t *lock);
-+ u8 clk_mux_flags, unsigned int *table, spinlock_t *lock);
-
- void clk_unregister_mux(struct clk *clk);
- void clk_hw_unregister_mux(struct clk_hw *hw);
diff --git a/target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch b/target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
deleted file mode 100644
index 45314e70d5..0000000000
--- a/target/linux/ipq806x/patches-4.14/0038-clk-qcom-Add-support-for-High-Frequency-PLLs-HFPLLs.patch
+++ /dev/null
@@ -1,352 +0,0 @@
-From patchwork Fri Dec 8 09:42:21 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v4,03/12] clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
-From: Sricharan R <sricharan@codeaurora.org>
-X-Patchwork-Id: 10102083
-Message-Id: <1512726150-7204-4-git-send-email-sricharan@codeaurora.org>
-To: mturquette@baylibre.com, sboyd@codeaurora.org,
- devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
-Cc: sricharan@codeaurora.org
-Date: Fri, 8 Dec 2017 15:12:21 +0530
-
-From: Stephen Boyd <sboyd@codeaurora.org>
-
-HFPLLs are the main frequency source for Krait CPU clocks. Add
-support for changing the rate of these PLLs.
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/clk-hfpll.c | 253 +++++++++++++++++++++++++++++++++++++++++++
- drivers/clk/qcom/clk-hfpll.h | 54 +++++++++
- 3 files changed, 308 insertions(+)
- create mode 100644 drivers/clk/qcom/clk-hfpll.c
- create mode 100644 drivers/clk/qcom/clk-hfpll.h
-
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -10,6 +10,7 @@ clk-qcom-y += clk-rcg2.o
- clk-qcom-y += clk-branch.o
- clk-qcom-y += clk-regmap-divider.o
- clk-qcom-y += clk-regmap-mux.o
-+clk-qcom-y += clk-hfpll.o
- clk-qcom-y += reset.o
- clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
-
---- /dev/null
-+++ b/drivers/clk/qcom/clk-hfpll.c
-@@ -0,0 +1,253 @@
-+/*
-+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/export.h>
-+#include <linux/regmap.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/clk-provider.h>
-+#include <linux/spinlock.h>
-+
-+#include "clk-regmap.h"
-+#include "clk-hfpll.h"
-+
-+#define PLL_OUTCTRL BIT(0)
-+#define PLL_BYPASSNL BIT(1)
-+#define PLL_RESET_N BIT(2)
-+
-+/* Initialize a HFPLL at a given rate and enable it. */
-+static void __clk_hfpll_init_once(struct clk_hw *hw)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+
-+ if (likely(h->init_done))
-+ return;
-+
-+ /* Configure PLL parameters for integer mode. */
-+ if (hd->config_val)
-+ regmap_write(regmap, hd->config_reg, hd->config_val);
-+ regmap_write(regmap, hd->m_reg, 0);
-+ regmap_write(regmap, hd->n_reg, 1);
-+
-+ if (hd->user_reg) {
-+ u32 regval = hd->user_val;
-+ unsigned long rate;
-+
-+ rate = clk_hw_get_rate(hw);
-+
-+ /* Pick the right VCO. */
-+ if (hd->user_vco_mask && rate > hd->low_vco_max_rate)
-+ regval |= hd->user_vco_mask;
-+ regmap_write(regmap, hd->user_reg, regval);
-+ }
-+
-+ if (hd->droop_reg)
-+ regmap_write(regmap, hd->droop_reg, hd->droop_val);
-+
-+ h->init_done = true;
-+}
-+
-+static void __clk_hfpll_enable(struct clk_hw *hw)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+ u32 val;
-+
-+ __clk_hfpll_init_once(hw);
-+
-+ /* Disable PLL bypass mode. */
-+ regmap_update_bits(regmap, hd->mode_reg, PLL_BYPASSNL, PLL_BYPASSNL);
-+
-+ /*
-+ * H/W requires a 5us delay between disabling the bypass and
-+ * de-asserting the reset. Delay 10us just to be safe.
-+ */
-+ udelay(10);
-+
-+ /* De-assert active-low PLL reset. */
-+ regmap_update_bits(regmap, hd->mode_reg, PLL_RESET_N, PLL_RESET_N);
-+
-+ /* Wait for PLL to lock. */
-+ if (hd->status_reg) {
-+ do {
-+ regmap_read(regmap, hd->status_reg, &val);
-+ } while (!(val & BIT(hd->lock_bit)));
-+ } else {
-+ udelay(60);
-+ }
-+
-+ /* Enable PLL output. */
-+ regmap_update_bits(regmap, hd->mode_reg, PLL_OUTCTRL, PLL_OUTCTRL);
-+}
-+
-+/* Enable an already-configured HFPLL. */
-+static int clk_hfpll_enable(struct clk_hw *hw)
-+{
-+ unsigned long flags;
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+ u32 mode;
-+
-+ spin_lock_irqsave(&h->lock, flags);
-+ regmap_read(regmap, hd->mode_reg, &mode);
-+ if (!(mode & (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)))
-+ __clk_hfpll_enable(hw);
-+ spin_unlock_irqrestore(&h->lock, flags);
-+
-+ return 0;
-+}
-+
-+static void __clk_hfpll_disable(struct clk_hfpll *h)
-+{
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+
-+ /*
-+ * Disable the PLL output, disable test mode, enable the bypass mode,
-+ * and assert the reset.
-+ */
-+ regmap_update_bits(regmap, hd->mode_reg,
-+ PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL, 0);
-+}
-+
-+static void clk_hfpll_disable(struct clk_hw *hw)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ unsigned long flags;
-+
-+ spin_lock_irqsave(&h->lock, flags);
-+ __clk_hfpll_disable(h);
-+ spin_unlock_irqrestore(&h->lock, flags);
-+}
-+
-+static long clk_hfpll_round_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *parent_rate)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ unsigned long rrate;
-+
-+ rate = clamp(rate, hd->min_rate, hd->max_rate);
-+
-+ rrate = DIV_ROUND_UP(rate, *parent_rate) * *parent_rate;
-+ if (rrate > hd->max_rate)
-+ rrate -= *parent_rate;
-+
-+ return rrate;
-+}
-+
-+/*
-+ * For optimization reasons, assumes no downstream clocks are actively using
-+ * it.
-+ */
-+static int clk_hfpll_set_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long parent_rate)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+ unsigned long flags;
-+ u32 l_val, val;
-+ bool enabled;
-+
-+ l_val = rate / parent_rate;
-+
-+ spin_lock_irqsave(&h->lock, flags);
-+
-+ enabled = __clk_is_enabled(hw->clk);
-+ if (enabled)
-+ __clk_hfpll_disable(h);
-+
-+ /* Pick the right VCO. */
-+ if (hd->user_reg && hd->user_vco_mask) {
-+ regmap_read(regmap, hd->user_reg, &val);
-+ if (rate <= hd->low_vco_max_rate)
-+ val &= ~hd->user_vco_mask;
-+ else
-+ val |= hd->user_vco_mask;
-+ regmap_write(regmap, hd->user_reg, val);
-+ }
-+
-+ regmap_write(regmap, hd->l_reg, l_val);
-+
-+ if (enabled)
-+ __clk_hfpll_enable(hw);
-+
-+ spin_unlock_irqrestore(&h->lock, flags);
-+
-+ return 0;
-+}
-+
-+static unsigned long clk_hfpll_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+ u32 l_val;
-+
-+ regmap_read(regmap, hd->l_reg, &l_val);
-+
-+ return l_val * parent_rate;
-+}
-+
-+static void clk_hfpll_init(struct clk_hw *hw)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+ u32 mode, status;
-+
-+ regmap_read(regmap, hd->mode_reg, &mode);
-+ if (mode != (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL)) {
-+ __clk_hfpll_init_once(hw);
-+ return;
-+ }
-+
-+ if (hd->status_reg) {
-+ regmap_read(regmap, hd->status_reg, &status);
-+ if (!(status & BIT(hd->lock_bit))) {
-+ WARN(1, "HFPLL %s is ON, but not locked!\n",
-+ __clk_get_name(hw->clk));
-+ clk_hfpll_disable(hw);
-+ __clk_hfpll_init_once(hw);
-+ }
-+ }
-+}
-+
-+static int hfpll_is_enabled(struct clk_hw *hw)
-+{
-+ struct clk_hfpll *h = to_clk_hfpll(hw);
-+ struct hfpll_data const *hd = h->d;
-+ struct regmap *regmap = h->clkr.regmap;
-+ u32 mode;
-+
-+ regmap_read(regmap, hd->mode_reg, &mode);
-+ mode &= 0x7;
-+ return mode == (PLL_BYPASSNL | PLL_RESET_N | PLL_OUTCTRL);
-+}
-+
-+const struct clk_ops clk_ops_hfpll = {
-+ .enable = clk_hfpll_enable,
-+ .disable = clk_hfpll_disable,
-+ .is_enabled = hfpll_is_enabled,
-+ .round_rate = clk_hfpll_round_rate,
-+ .set_rate = clk_hfpll_set_rate,
-+ .recalc_rate = clk_hfpll_recalc_rate,
-+ .init = clk_hfpll_init,
-+};
-+EXPORT_SYMBOL_GPL(clk_ops_hfpll);
---- /dev/null
-+++ b/drivers/clk/qcom/clk-hfpll.h
-@@ -0,0 +1,54 @@
-+/*
-+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+#ifndef __QCOM_CLK_HFPLL_H__
-+#define __QCOM_CLK_HFPLL_H__
-+
-+#include <linux/clk-provider.h>
-+#include <linux/spinlock.h>
-+#include "clk-regmap.h"
-+
-+struct hfpll_data {
-+ u32 mode_reg;
-+ u32 l_reg;
-+ u32 m_reg;
-+ u32 n_reg;
-+ u32 user_reg;
-+ u32 droop_reg;
-+ u32 config_reg;
-+ u32 status_reg;
-+ u8 lock_bit;
-+
-+ u32 droop_val;
-+ u32 config_val;
-+ u32 user_val;
-+ u32 user_vco_mask;
-+ unsigned long low_vco_max_rate;
-+
-+ unsigned long min_rate;
-+ unsigned long max_rate;
-+};
-+
-+struct clk_hfpll {
-+ struct hfpll_data const *d;
-+ int init_done;
-+
-+ struct clk_regmap clkr;
-+ spinlock_t lock;
-+};
-+
-+#define to_clk_hfpll(_hw) \
-+ container_of(to_clk_regmap(_hw), struct clk_hfpll, clkr)
-+
-+extern const struct clk_ops clk_ops_hfpll;
-+
-+#endif
diff --git a/target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch b/target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch
deleted file mode 100644
index 884d564ae7..0000000000
--- a/target/linux/ipq806x/patches-4.14/0039-clk-qcom-Add-HFPLL-driver.patch
+++ /dev/null
@@ -1,206 +0,0 @@
-From patchwork Fri Dec 8 09:42:22 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v4,04/12] clk: qcom: Add HFPLL driver
-From: Sricharan R <sricharan@codeaurora.org>
-X-Patchwork-Id: 10102079
-Message-Id: <1512726150-7204-5-git-send-email-sricharan@codeaurora.org>
-To: mturquette@baylibre.com, sboyd@codeaurora.org,
- devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
-Cc: sricharan@codeaurora.org
-Date: Fri, 8 Dec 2017 15:12:22 +0530
-
-From: Stephen Boyd <sboyd@codeaurora.org>
-
-On some devices (MSM8974 for example), the HFPLLs are
-instantiated within the Krait processor subsystem as separate
-register regions. Add a driver for these PLLs so that we can
-provide HFPLL clocks for use by the system.
-
-Cc: <devicetree@vger.kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- .../devicetree/bindings/clock/qcom,hfpll.txt | 40 ++++++++
- drivers/clk/qcom/Kconfig | 8 ++
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/hfpll.c | 106 +++++++++++++++++++++
- 4 files changed, 155 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/clock/qcom,hfpll.txt
- create mode 100644 drivers/clk/qcom/hfpll.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/clock/qcom,hfpll.txt
-@@ -0,0 +1,40 @@
-+High-Frequency PLL (HFPLL)
-+
-+PROPERTIES
-+
-+- compatible:
-+ Usage: required
-+ Value type: <string>
-+ Definition: must be "qcom,hfpll"
-+
-+- reg:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: address and size of HPLL registers. An optional second
-+ element specifies the address and size of the alias
-+ register region.
-+
-+- clock-output-names:
-+ Usage: required
-+ Value type: <string>
-+ Definition: Name of the PLL. Typically hfpllX where X is a CPU number
-+ starting at 0. Otherwise hfpll_Y where Y is more specific
-+ such as "l2".
-+
-+Example:
-+
-+1) An HFPLL for the L2 cache.
-+
-+ clock-controller@f9016000 {
-+ compatible = "qcom,hfpll";
-+ reg = <0xf9016000 0x30>;
-+ clock-output-names = "hfpll_l2";
-+ };
-+
-+2) An HFPLL for CPU0. This HFPLL has the alias register region.
-+
-+ clock-controller@f908a000 {
-+ compatible = "qcom,hfpll";
-+ reg = <0xf908a000 0x30>, <0xf900a000 0x30>;
-+ clock-output-names = "hfpll0";
-+ };
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -196,3 +196,11 @@ config MSM_MMCC_8996
- Support for the multimedia clock controller on msm8996 devices.
- Say Y if you want to support multimedia devices such as display,
- graphics, video encode/decode, camera, etc.
-+
-+config QCOM_HFPLL
-+ tristate "High-Frequency PLL (HFPLL) Clock Controller"
-+ depends on COMMON_CLK_QCOM
-+ help
-+ Support for the high-frequency PLLs present on Qualcomm devices.
-+ Say Y if you want to support CPU frequency scaling on devices
-+ such as MSM8974, APQ8084, etc.
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -35,3 +35,4 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8
- obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
- obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
- obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
-+obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
---- /dev/null
-+++ b/drivers/clk/qcom/hfpll.c
-@@ -0,0 +1,106 @@
-+/*
-+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/of.h>
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/regmap.h>
-+
-+#include "clk-regmap.h"
-+#include "clk-hfpll.h"
-+
-+static const struct hfpll_data hdata = {
-+ .mode_reg = 0x00,
-+ .l_reg = 0x04,
-+ .m_reg = 0x08,
-+ .n_reg = 0x0c,
-+ .user_reg = 0x10,
-+ .config_reg = 0x14,
-+ .config_val = 0x430405d,
-+ .status_reg = 0x1c,
-+ .lock_bit = 16,
-+
-+ .user_val = 0x8,
-+ .user_vco_mask = 0x100000,
-+ .low_vco_max_rate = 1248000000,
-+ .min_rate = 537600000UL,
-+ .max_rate = 2900000000UL,
-+};
-+
-+static const struct of_device_id qcom_hfpll_match_table[] = {
-+ { .compatible = "qcom,hfpll" },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(of, qcom_hfpll_match_table);
-+
-+static const struct regmap_config hfpll_regmap_config = {
-+ .reg_bits = 32,
-+ .reg_stride = 4,
-+ .val_bits = 32,
-+ .max_register = 0x30,
-+ .fast_io = true,
-+};
-+
-+static int qcom_hfpll_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ struct device *dev = &pdev->dev;
-+ void __iomem *base;
-+ struct regmap *regmap;
-+ struct clk_hfpll *h;
-+ struct clk_init_data init = {
-+ .parent_names = (const char *[]){ "xo" },
-+ .num_parents = 1,
-+ .ops = &clk_ops_hfpll,
-+ };
-+
-+ h = devm_kzalloc(dev, sizeof(*h), GFP_KERNEL);
-+ if (!h)
-+ return -ENOMEM;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ regmap = devm_regmap_init_mmio(&pdev->dev, base, &hfpll_regmap_config);
-+ if (IS_ERR(regmap))
-+ return PTR_ERR(regmap);
-+
-+ if (of_property_read_string_index(dev->of_node, "clock-output-names",
-+ 0, &init.name))
-+ return -ENODEV;
-+
-+ h->d = &hdata;
-+ h->clkr.hw.init = &init;
-+ spin_lock_init(&h->lock);
-+
-+ return devm_clk_register_regmap(&pdev->dev, &h->clkr);
-+}
-+
-+static struct platform_driver qcom_hfpll_driver = {
-+ .probe = qcom_hfpll_probe,
-+ .driver = {
-+ .name = "qcom-hfpll",
-+ .of_match_table = qcom_hfpll_match_table,
-+ },
-+};
-+module_platform_driver(qcom_hfpll_driver);
-+
-+MODULE_DESCRIPTION("QCOM HFPLL Clock Driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:qcom-hfpll");
diff --git a/target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch b/target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch
deleted file mode 100644
index c3af0fa55c..0000000000
--- a/target/linux/ipq806x/patches-4.14/0040-clk-qcom-Add-IPQ806X-s-HFPLLs.patch
+++ /dev/null
@@ -1,129 +0,0 @@
-From patchwork Fri Dec 8 09:42:24 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v4,06/12] clk: qcom: Add IPQ806X's HFPLLs
-From: Sricharan R <sricharan@codeaurora.org>
-X-Patchwork-Id: 10102047
-Message-Id: <1512726150-7204-7-git-send-email-sricharan@codeaurora.org>
-To: mturquette@baylibre.com, sboyd@codeaurora.org,
- devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
-Cc: sricharan@codeaurora.org
-Date: Fri, 8 Dec 2017 15:12:24 +0530
-
-From: Stephen Boyd <sboyd@codeaurora.org>
-
-Describe the HFPLLs present on IPQ806X devices.
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/qcom/gcc-ipq806x.c | 82 ++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 82 insertions(+)
-
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -30,6 +30,7 @@
- #include "clk-pll.h"
- #include "clk-rcg.h"
- #include "clk-branch.h"
-+#include "clk-hfpll.h"
- #include "reset.h"
-
- static struct clk_pll pll0 = {
-@@ -113,6 +114,84 @@ static struct clk_regmap pll8_vote = {
- },
- };
-
-+static struct hfpll_data hfpll0_data = {
-+ .mode_reg = 0x3200,
-+ .l_reg = 0x3208,
-+ .m_reg = 0x320c,
-+ .n_reg = 0x3210,
-+ .config_reg = 0x3204,
-+ .status_reg = 0x321c,
-+ .config_val = 0x7845c665,
-+ .droop_reg = 0x3214,
-+ .droop_val = 0x0108c000,
-+ .min_rate = 600000000UL,
-+ .max_rate = 1800000000UL,
-+};
-+
-+static struct clk_hfpll hfpll0 = {
-+ .d = &hfpll0_data,
-+ .clkr.hw.init = &(struct clk_init_data){
-+ .parent_names = (const char *[]){ "pxo" },
-+ .num_parents = 1,
-+ .name = "hfpll0",
-+ .ops = &clk_ops_hfpll,
-+ .flags = CLK_IGNORE_UNUSED,
-+ },
-+ .lock = __SPIN_LOCK_UNLOCKED(hfpll0.lock),
-+};
-+
-+static struct hfpll_data hfpll1_data = {
-+ .mode_reg = 0x3240,
-+ .l_reg = 0x3248,
-+ .m_reg = 0x324c,
-+ .n_reg = 0x3250,
-+ .config_reg = 0x3244,
-+ .status_reg = 0x325c,
-+ .config_val = 0x7845c665,
-+ .droop_reg = 0x3314,
-+ .droop_val = 0x0108c000,
-+ .min_rate = 600000000UL,
-+ .max_rate = 1800000000UL,
-+};
-+
-+static struct clk_hfpll hfpll1 = {
-+ .d = &hfpll1_data,
-+ .clkr.hw.init = &(struct clk_init_data){
-+ .parent_names = (const char *[]){ "pxo" },
-+ .num_parents = 1,
-+ .name = "hfpll1",
-+ .ops = &clk_ops_hfpll,
-+ .flags = CLK_IGNORE_UNUSED,
-+ },
-+ .lock = __SPIN_LOCK_UNLOCKED(hfpll1.lock),
-+};
-+
-+static struct hfpll_data hfpll_l2_data = {
-+ .mode_reg = 0x3300,
-+ .l_reg = 0x3308,
-+ .m_reg = 0x330c,
-+ .n_reg = 0x3310,
-+ .config_reg = 0x3304,
-+ .status_reg = 0x331c,
-+ .config_val = 0x7845c665,
-+ .droop_reg = 0x3314,
-+ .droop_val = 0x0108c000,
-+ .min_rate = 600000000UL,
-+ .max_rate = 1800000000UL,
-+};
-+
-+static struct clk_hfpll hfpll_l2 = {
-+ .d = &hfpll_l2_data,
-+ .clkr.hw.init = &(struct clk_init_data){
-+ .parent_names = (const char *[]){ "pxo" },
-+ .num_parents = 1,
-+ .name = "hfpll_l2",
-+ .ops = &clk_ops_hfpll,
-+ .flags = CLK_IGNORE_UNUSED,
-+ },
-+ .lock = __SPIN_LOCK_UNLOCKED(hfpll_l2.lock),
-+};
-+
- static struct clk_pll pll14 = {
- .l_reg = 0x31c4,
- .m_reg = 0x31c8,
-@@ -2801,6 +2880,9 @@ static struct clk_regmap *gcc_ipq806x_cl
- [UBI32_CORE2_CLK_SRC] = &ubi32_core2_src_clk.clkr,
- [NSSTCM_CLK_SRC] = &nss_tcm_src.clkr,
- [NSSTCM_CLK] = &nss_tcm_clk.clkr,
-+ [PLL9] = &hfpll0.clkr,
-+ [PLL10] = &hfpll1.clkr,
-+ [PLL12] = &hfpll_l2.clkr,
- };
-
- static const struct qcom_reset_map gcc_ipq806x_resets[] = {
diff --git a/target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch b/target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch
deleted file mode 100644
index 5896ab3a26..0000000000
--- a/target/linux/ipq806x/patches-4.14/0041-clk-qcom-Add-support-for-Krait-clocks.patch
+++ /dev/null
@@ -1,241 +0,0 @@
-From patchwork Fri Dec 8 09:42:25 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v4,07/12] clk: qcom: Add support for Krait clocks
-From: Sricharan R <sricharan@codeaurora.org>
-X-Patchwork-Id: 10102051
-Message-Id: <1512726150-7204-8-git-send-email-sricharan@codeaurora.org>
-To: mturquette@baylibre.com, sboyd@codeaurora.org,
- devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
-Cc: sricharan@codeaurora.org
-Date: Fri, 8 Dec 2017 15:12:25 +0530
-
-From: Stephen Boyd <sboyd@codeaurora.org>
-
-The Krait clocks are made up of a series of muxes and a divider
-that choose between a fixed rate clock and dedicated HFPLLs for
-each CPU. Instead of using mmio accesses to remux parents, the
-Krait implementation exposes the remux control via cp15
-registers. Support these clocks.
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/qcom/Kconfig | 4 ++
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/clk-krait.c | 134 +++++++++++++++++++++++++++++++++++++++++++
- drivers/clk/qcom/clk-krait.h | 48 ++++++++++++++++
- 4 files changed, 187 insertions(+)
- create mode 100644 drivers/clk/qcom/clk-krait.c
- create mode 100644 drivers/clk/qcom/clk-krait.h
-
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -204,3 +204,7 @@ config QCOM_HFPLL
- Support for the high-frequency PLLs present on Qualcomm devices.
- Say Y if you want to support CPU frequency scaling on devices
- such as MSM8974, APQ8084, etc.
-+
-+config KRAIT_CLOCKS
-+ bool
-+ select KRAIT_L2_ACCESSORS
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -10,6 +10,7 @@ clk-qcom-y += clk-rcg2.o
- clk-qcom-y += clk-branch.o
- clk-qcom-y += clk-regmap-divider.o
- clk-qcom-y += clk-regmap-mux.o
-+clk-qcom-$(CONFIG_KRAIT_CLOCKS) += clk-krait.o
- clk-qcom-y += clk-hfpll.o
- clk-qcom-y += reset.o
- clk-qcom-$(CONFIG_QCOM_GDSC) += gdsc.o
---- /dev/null
-+++ b/drivers/clk/qcom/clk-krait.c
-@@ -0,0 +1,134 @@
-+/*
-+ * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/delay.h>
-+#include <linux/err.h>
-+#include <linux/clk-provider.h>
-+#include <linux/spinlock.h>
-+
-+#include <asm/krait-l2-accessors.h>
-+
-+#include "clk-krait.h"
-+
-+/* Secondary and primary muxes share the same cp15 register */
-+static DEFINE_SPINLOCK(krait_clock_reg_lock);
-+
-+#define LPL_SHIFT 8
-+static void __krait_mux_set_sel(struct krait_mux_clk *mux, int sel)
-+{
-+ unsigned long flags;
-+ u32 regval;
-+
-+ spin_lock_irqsave(&krait_clock_reg_lock, flags);
-+ regval = krait_get_l2_indirect_reg(mux->offset);
-+ regval &= ~(mux->mask << mux->shift);
-+ regval |= (sel & mux->mask) << mux->shift;
-+ if (mux->lpl) {
-+ regval &= ~(mux->mask << (mux->shift + LPL_SHIFT));
-+ regval |= (sel & mux->mask) << (mux->shift + LPL_SHIFT);
-+ }
-+ krait_set_l2_indirect_reg(mux->offset, regval);
-+ spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
-+
-+ /* Wait for switch to complete. */
-+ mb();
-+ udelay(1);
-+}
-+
-+static int krait_mux_set_parent(struct clk_hw *hw, u8 index)
-+{
-+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
-+ u32 sel;
-+
-+ sel = clk_mux_reindex(index, mux->parent_map, 0);
-+ mux->en_mask = sel;
-+ /* Don't touch mux if CPU is off as it won't work */
-+ if (__clk_is_enabled(hw->clk))
-+ __krait_mux_set_sel(mux, sel);
-+
-+ return 0;
-+}
-+
-+static u8 krait_mux_get_parent(struct clk_hw *hw)
-+{
-+ struct krait_mux_clk *mux = to_krait_mux_clk(hw);
-+ u32 sel;
-+
-+ sel = krait_get_l2_indirect_reg(mux->offset);
-+ sel >>= mux->shift;
-+ sel &= mux->mask;
-+ mux->en_mask = sel;
-+
-+ return clk_mux_get_parent(hw, sel, mux->parent_map, 0);
-+}
-+
-+const struct clk_ops krait_mux_clk_ops = {
-+ .set_parent = krait_mux_set_parent,
-+ .get_parent = krait_mux_get_parent,
-+ .determine_rate = __clk_mux_determine_rate_closest,
-+};
-+EXPORT_SYMBOL_GPL(krait_mux_clk_ops);
-+
-+/* The divider can divide by 2, 4, 6 and 8. But we only really need div-2. */
-+static long krait_div2_round_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *parent_rate)
-+{
-+ *parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), rate * 2);
-+ return DIV_ROUND_UP(*parent_rate, 2);
-+}
-+
-+static int krait_div2_set_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long parent_rate)
-+{
-+ struct krait_div2_clk *d = to_krait_div2_clk(hw);
-+ unsigned long flags;
-+ u32 val;
-+ u32 mask = BIT(d->width) - 1;
-+
-+ if (d->lpl)
-+ mask = mask << (d->shift + LPL_SHIFT) | mask << d->shift;
-+
-+ spin_lock_irqsave(&krait_clock_reg_lock, flags);
-+ val = krait_get_l2_indirect_reg(d->offset);
-+ val &= ~mask;
-+ krait_set_l2_indirect_reg(d->offset, val);
-+ spin_unlock_irqrestore(&krait_clock_reg_lock, flags);
-+
-+ return 0;
-+}
-+
-+static unsigned long
-+krait_div2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate)
-+{
-+ struct krait_div2_clk *d = to_krait_div2_clk(hw);
-+ u32 mask = BIT(d->width) - 1;
-+ u32 div;
-+
-+ div = krait_get_l2_indirect_reg(d->offset);
-+ div >>= d->shift;
-+ div &= mask;
-+ div = (div + 1) * 2;
-+
-+ return DIV_ROUND_UP(parent_rate, div);
-+}
-+
-+const struct clk_ops krait_div2_clk_ops = {
-+ .round_rate = krait_div2_round_rate,
-+ .set_rate = krait_div2_set_rate,
-+ .recalc_rate = krait_div2_recalc_rate,
-+};
-+EXPORT_SYMBOL_GPL(krait_div2_clk_ops);
---- /dev/null
-+++ b/drivers/clk/qcom/clk-krait.h
-@@ -0,0 +1,48 @@
-+/*
-+ * Copyright (c) 2013, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __QCOM_CLK_KRAIT_H
-+#define __QCOM_CLK_KRAIT_H
-+
-+#include <linux/clk-provider.h>
-+
-+struct krait_mux_clk {
-+ unsigned int *parent_map;
-+ u32 offset;
-+ u32 mask;
-+ u32 shift;
-+ u32 en_mask;
-+ bool lpl;
-+
-+ struct clk_hw hw;
-+ struct notifier_block clk_nb;
-+};
-+
-+#define to_krait_mux_clk(_hw) container_of(_hw, struct krait_mux_clk, hw)
-+
-+extern const struct clk_ops krait_mux_clk_ops;
-+
-+struct krait_div2_clk {
-+ u32 offset;
-+ u8 width;
-+ u32 shift;
-+ bool lpl;
-+
-+ struct clk_hw hw;
-+};
-+
-+#define to_krait_div2_clk(_hw) container_of(_hw, struct krait_div2_clk, hw)
-+
-+extern const struct clk_ops krait_div2_clk_ops;
-+
-+#endif
diff --git a/target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch b/target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
deleted file mode 100644
index 93c86ebb69..0000000000
--- a/target/linux/ipq806x/patches-4.14/0042-clk-qcom-Add-KPSS-ACC-GCC-driver.patch
+++ /dev/null
@@ -1,209 +0,0 @@
-From patchwork Fri Dec 8 09:42:26 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v4,08/12] clk: qcom: Add KPSS ACC/GCC driver
-From: Sricharan R <sricharan@codeaurora.org>
-X-Patchwork-Id: 10102023
-Message-Id: <1512726150-7204-9-git-send-email-sricharan@codeaurora.org>
-To: mturquette@baylibre.com, sboyd@codeaurora.org,
- devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
-Cc: sricharan@codeaurora.org
-Date: Fri, 8 Dec 2017 15:12:26 +0530
-
-From: Stephen Boyd <sboyd@codeaurora.org>
-
-The ACC and GCC regions present in KPSSv1 contain registers to
-control clocks and power to each Krait CPU and L2. For CPUfreq
-purposes probe these devices and expose a mux clock that chooses
-between PXO and PLL8.
-
-Cc: <devicetree@vger.kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- .../devicetree/bindings/arm/msm/qcom,kpss-acc.txt | 7 ++
- .../devicetree/bindings/arm/msm/qcom,kpss-gcc.txt | 28 +++++++
- drivers/clk/qcom/Kconfig | 8 ++
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/kpss-xcc.c | 96 ++++++++++++++++++++++
- 5 files changed, 140 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
- create mode 100644 drivers/clk/qcom/kpss-xcc.c
-
---- a/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
-+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-acc.txt
-@@ -21,10 +21,17 @@ PROPERTIES
- the register region. An optional second element specifies
- the base address and size of the alias register region.
-
-+- clock-output-names:
-+ Usage: optional
-+ Value type: <string>
-+ Definition: Name of the output clock. Typically acpuX_aux where X is a
-+ CPU number starting at 0.
-+
- Example:
-
- clock-controller@2088000 {
- compatible = "qcom,kpss-acc-v2";
- reg = <0x02088000 0x1000>,
- <0x02008000 0x1000>;
-+ clock-output-names = "acpu0_aux";
- };
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/msm/qcom,kpss-gcc.txt
-@@ -0,0 +1,28 @@
-+Krait Processor Sub-system (KPSS) Global Clock Controller (GCC)
-+
-+PROPERTIES
-+
-+- compatible:
-+ Usage: required
-+ Value type: <string>
-+ Definition: should be one of:
-+ "qcom,kpss-gcc"
-+
-+- reg:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: base address and size of the register region
-+
-+- clock-output-names:
-+ Usage: required
-+ Value type: <string>
-+ Definition: Name of the output clock. Typically acpu_l2_aux indicating
-+ an L2 cache auxiliary clock.
-+
-+Example:
-+
-+ l2cc: clock-controller@2011000 {
-+ compatible = "qcom,kpss-gcc";
-+ reg = <0x2011000 0x1000>;
-+ clock-output-names = "acpu_l2_aux";
-+ };
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -205,6 +205,14 @@ config QCOM_HFPLL
- Say Y if you want to support CPU frequency scaling on devices
- such as MSM8974, APQ8084, etc.
-
-+config KPSS_XCC
-+ tristate "KPSS Clock Controller"
-+ depends on COMMON_CLK_QCOM
-+ help
-+ Support for the Krait ACC and GCC clock controllers. Say Y
-+ if you want to support CPU frequency scaling on devices such
-+ as MSM8960, APQ8064, etc.
-+
- config KRAIT_CLOCKS
- bool
- select KRAIT_L2_ACCESSORS
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -36,4 +36,5 @@ obj-$(CONFIG_MSM_MMCC_8974) += mmcc-msm8
- obj-$(CONFIG_MSM_MMCC_8996) += mmcc-msm8996.o
- obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
- obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
-+obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
- obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
---- /dev/null
-+++ b/drivers/clk/qcom/kpss-xcc.c
-@@ -0,0 +1,96 @@
-+/* Copyright (c) 2014-2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+
-+static const char *aux_parents[] = {
-+ "pll8_vote",
-+ "pxo",
-+};
-+
-+static unsigned int aux_parent_map[] = {
-+ 3,
-+ 0,
-+};
-+
-+static const struct of_device_id kpss_xcc_match_table[] = {
-+ { .compatible = "qcom,kpss-acc-v1", .data = (void *)1UL },
-+ { .compatible = "qcom,kpss-gcc" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, kpss_xcc_match_table);
-+
-+static int kpss_xcc_driver_probe(struct platform_device *pdev)
-+{
-+ const struct of_device_id *id;
-+ struct clk *clk;
-+ struct resource *res;
-+ void __iomem *base;
-+ const char *name;
-+
-+ id = of_match_device(kpss_xcc_match_table, &pdev->dev);
-+ if (!id)
-+ return -ENODEV;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ if (id->data) {
-+ if (of_property_read_string_index(pdev->dev.of_node,
-+ "clock-output-names",
-+ 0, &name))
-+ return -ENODEV;
-+ base += 0x14;
-+ } else {
-+ name = "acpu_l2_aux";
-+ base += 0x28;
-+ }
-+
-+ clk = clk_register_mux_table(&pdev->dev, name, aux_parents,
-+ ARRAY_SIZE(aux_parents), 0, base, 0, 0x3,
-+ 0, aux_parent_map, NULL);
-+
-+ platform_set_drvdata(pdev, clk);
-+
-+ return PTR_ERR_OR_ZERO(clk);
-+}
-+
-+static int kpss_xcc_driver_remove(struct platform_device *pdev)
-+{
-+ clk_unregister_mux(platform_get_drvdata(pdev));
-+ return 0;
-+}
-+
-+static struct platform_driver kpss_xcc_driver = {
-+ .probe = kpss_xcc_driver_probe,
-+ .remove = kpss_xcc_driver_remove,
-+ .driver = {
-+ .name = "kpss-xcc",
-+ .of_match_table = kpss_xcc_match_table,
-+ },
-+};
-+module_platform_driver(kpss_xcc_driver);
-+
-+MODULE_DESCRIPTION("Krait Processor Sub System (KPSS) Clock Driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:kpss-xcc");
diff --git a/target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch b/target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch
deleted file mode 100644
index dcc10ec79c..0000000000
--- a/target/linux/ipq806x/patches-4.14/0043-clk-qcom-Add-Krait-clock-controller-driver.patch
+++ /dev/null
@@ -1,436 +0,0 @@
-From patchwork Fri Dec 8 09:42:27 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v4,09/12] clk: qcom: Add Krait clock controller driver
-From: Sricharan R <sricharan@codeaurora.org>
-X-Patchwork-Id: 10102061
-Message-Id: <1512726150-7204-10-git-send-email-sricharan@codeaurora.org>
-To: mturquette@baylibre.com, sboyd@codeaurora.org,
- devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
-Cc: sricharan@codeaurora.org
-Date: Fri, 8 Dec 2017 15:12:27 +0530
-
-From: Stephen Boyd <sboyd@codeaurora.org>
-
-The Krait CPU clocks are made up of a primary mux and secondary
-mux for each CPU and the L2, controlled via cp15 accessors. For
-Kraits within KPSSv1 each secondary mux accepts a different aux
-source, but on KPSSv2 each secondary mux accepts the same aux
-source.
-
-Cc: <devicetree@vger.kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- .../devicetree/bindings/clock/qcom,krait-cc.txt | 22 ++
- drivers/clk/qcom/Kconfig | 8 +
- drivers/clk/qcom/Makefile | 1 +
- drivers/clk/qcom/krait-cc.c | 350 +++++++++++++++++++++
- 4 files changed, 381 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
- create mode 100644 drivers/clk/qcom/krait-cc.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/clock/qcom,krait-cc.txt
-@@ -0,0 +1,22 @@
-+Krait Clock Controller
-+
-+PROPERTIES
-+
-+- compatible:
-+ Usage: required
-+ Value type: <string>
-+ Definition: must be one of:
-+ "qcom,krait-cc-v1"
-+ "qcom,krait-cc-v2"
-+
-+- #clock-cells:
-+ Usage: required
-+ Value type: <u32>
-+ Definition: must be 1
-+
-+Example:
-+
-+ kraitcc: clock-controller {
-+ compatible = "qcom,krait-cc-v1";
-+ #clock-cells = <1>;
-+ };
---- a/drivers/clk/qcom/Kconfig
-+++ b/drivers/clk/qcom/Kconfig
-@@ -213,6 +213,14 @@ config KPSS_XCC
- if you want to support CPU frequency scaling on devices such
- as MSM8960, APQ8064, etc.
-
-+config KRAITCC
-+ tristate "Krait Clock Controller"
-+ depends on COMMON_CLK_QCOM && ARM
-+ select KRAIT_CLOCKS
-+ help
-+ Support for the Krait CPU clocks on Qualcomm devices.
-+ Say Y if you want to support CPU frequency scaling.
-+
- config KRAIT_CLOCKS
- bool
- select KRAIT_L2_ACCESSORS
---- a/drivers/clk/qcom/Makefile
-+++ b/drivers/clk/qcom/Makefile
-@@ -38,3 +38,4 @@ obj-$(CONFIG_QCOM_CLK_RPM) += clk-rpm.o
- obj-$(CONFIG_QCOM_CLK_SMD_RPM) += clk-smd-rpm.o
- obj-$(CONFIG_KPSS_XCC) += kpss-xcc.o
- obj-$(CONFIG_QCOM_HFPLL) += hfpll.o
-+obj-$(CONFIG_KRAITCC) += krait-cc.o
---- /dev/null
-+++ b/drivers/clk/qcom/krait-cc.c
-@@ -0,0 +1,350 @@
-+/* Copyright (c) 2013-2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/clk.h>
-+#include <linux/clk-provider.h>
-+#include <linux/slab.h>
-+
-+#include "clk-krait.h"
-+
-+static unsigned int sec_mux_map[] = {
-+ 2,
-+ 0,
-+};
-+
-+static unsigned int pri_mux_map[] = {
-+ 1,
-+ 2,
-+ 0,
-+};
-+
-+static int
-+krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
-+{
-+ struct krait_div2_clk *div;
-+ struct clk_init_data init = {
-+ .num_parents = 1,
-+ .ops = &krait_div2_clk_ops,
-+ .flags = CLK_SET_RATE_PARENT,
-+ };
-+ const char *p_names[1];
-+ struct clk *clk;
-+
-+ div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
-+ if (!div)
-+ return -ENOMEM;
-+
-+ div->width = 2;
-+ div->shift = 6;
-+ div->lpl = id >= 0;
-+ div->offset = offset;
-+ div->hw.init = &init;
-+
-+ init.name = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
-+ if (!init.name)
-+ return -ENOMEM;
-+
-+ init.parent_names = p_names;
-+ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
-+ if (!p_names[0]) {
-+ kfree(init.name);
-+ return -ENOMEM;
-+ }
-+
-+ clk = devm_clk_register(dev, &div->hw);
-+ kfree(p_names[0]);
-+ kfree(init.name);
-+
-+ return PTR_ERR_OR_ZERO(clk);
-+}
-+
-+static int
-+krait_add_sec_mux(struct device *dev, int id, const char *s,
-+ unsigned int offset, bool unique_aux)
-+{
-+ struct krait_mux_clk *mux;
-+ static const char *sec_mux_list[] = {
-+ "acpu_aux",
-+ "qsb",
-+ };
-+ struct clk_init_data init = {
-+ .parent_names = sec_mux_list,
-+ .num_parents = ARRAY_SIZE(sec_mux_list),
-+ .ops = &krait_mux_clk_ops,
-+ .flags = CLK_SET_RATE_PARENT,
-+ };
-+ struct clk *clk;
-+
-+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
-+ if (!mux)
-+ return -ENOMEM;
-+
-+ mux->offset = offset;
-+ mux->lpl = id >= 0;
-+ mux->mask = 0x3;
-+ mux->shift = 2;
-+ mux->parent_map = sec_mux_map;
-+ mux->hw.init = &init;
-+
-+ init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
-+ if (!init.name)
-+ return -ENOMEM;
-+
-+ if (unique_aux) {
-+ sec_mux_list[0] = kasprintf(GFP_KERNEL, "acpu%s_aux", s);
-+ if (!sec_mux_list[0]) {
-+ clk = ERR_PTR(-ENOMEM);
-+ goto err_aux;
-+ }
-+ }
-+
-+ clk = devm_clk_register(dev, &mux->hw);
-+
-+ if (unique_aux)
-+ kfree(sec_mux_list[0]);
-+err_aux:
-+ kfree(init.name);
-+ return PTR_ERR_OR_ZERO(clk);
-+}
-+
-+static struct clk *
-+krait_add_pri_mux(struct device *dev, int id, const char *s,
-+ unsigned int offset)
-+{
-+ struct krait_mux_clk *mux;
-+ const char *p_names[3];
-+ struct clk_init_data init = {
-+ .parent_names = p_names,
-+ .num_parents = ARRAY_SIZE(p_names),
-+ .ops = &krait_mux_clk_ops,
-+ .flags = CLK_SET_RATE_PARENT,
-+ };
-+ struct clk *clk;
-+
-+ mux = devm_kzalloc(dev, sizeof(*mux), GFP_KERNEL);
-+ if (!mux)
-+ return ERR_PTR(-ENOMEM);
-+
-+ mux->mask = 0x3;
-+ mux->shift = 0;
-+ mux->offset = offset;
-+ mux->lpl = id >= 0;
-+ mux->parent_map = pri_mux_map;
-+ mux->hw.init = &init;
-+
-+ init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
-+ if (!init.name)
-+ return ERR_PTR(-ENOMEM);
-+
-+ p_names[0] = kasprintf(GFP_KERNEL, "hfpll%s", s);
-+ if (!p_names[0]) {
-+ clk = ERR_PTR(-ENOMEM);
-+ goto err_p0;
-+ }
-+
-+ p_names[1] = kasprintf(GFP_KERNEL, "hfpll%s_div", s);
-+ if (!p_names[1]) {
-+ clk = ERR_PTR(-ENOMEM);
-+ goto err_p1;
-+ }
-+
-+ p_names[2] = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
-+ if (!p_names[2]) {
-+ clk = ERR_PTR(-ENOMEM);
-+ goto err_p2;
-+ }
-+
-+ clk = devm_clk_register(dev, &mux->hw);
-+
-+ kfree(p_names[2]);
-+err_p2:
-+ kfree(p_names[1]);
-+err_p1:
-+ kfree(p_names[0]);
-+err_p0:
-+ kfree(init.name);
-+ return clk;
-+}
-+
-+/* id < 0 for L2, otherwise id == physical CPU number */
-+static struct clk *krait_add_clks(struct device *dev, int id, bool unique_aux)
-+{
-+ int ret;
-+ unsigned int offset;
-+ void *p = NULL;
-+ const char *s;
-+ struct clk *clk;
-+
-+ if (id >= 0) {
-+ offset = 0x4501 + (0x1000 * id);
-+ s = p = kasprintf(GFP_KERNEL, "%d", id);
-+ if (!s)
-+ return ERR_PTR(-ENOMEM);
-+ } else {
-+ offset = 0x500;
-+ s = "_l2";
-+ }
-+
-+ ret = krait_add_div(dev, id, s, offset);
-+ if (ret) {
-+ clk = ERR_PTR(ret);
-+ goto err;
-+ }
-+
-+ ret = krait_add_sec_mux(dev, id, s, offset, unique_aux);
-+ if (ret) {
-+ clk = ERR_PTR(ret);
-+ goto err;
-+ }
-+
-+ clk = krait_add_pri_mux(dev, id, s, offset);
-+err:
-+ kfree(p);
-+ return clk;
-+}
-+
-+static struct clk *krait_of_get(struct of_phandle_args *clkspec, void *data)
-+{
-+ unsigned int idx = clkspec->args[0];
-+ struct clk **clks = data;
-+
-+ if (idx >= 5) {
-+ pr_err("%s: invalid clock index %d\n", __func__, idx);
-+ return ERR_PTR(-EINVAL);
-+ }
-+
-+ return clks[idx] ? : ERR_PTR(-ENODEV);
-+}
-+
-+static const struct of_device_id krait_cc_match_table[] = {
-+ { .compatible = "qcom,krait-cc-v1", (void *)1UL },
-+ { .compatible = "qcom,krait-cc-v2" },
-+ {}
-+};
-+MODULE_DEVICE_TABLE(of, krait_cc_match_table);
-+
-+static int krait_cc_probe(struct platform_device *pdev)
-+{
-+ struct device *dev = &pdev->dev;
-+ const struct of_device_id *id;
-+ unsigned long cur_rate, aux_rate;
-+ int cpu;
-+ struct clk *clk;
-+ struct clk **clks;
-+ struct clk *l2_pri_mux_clk;
-+
-+ id = of_match_device(krait_cc_match_table, dev);
-+ if (!id)
-+ return -ENODEV;
-+
-+ /* Rate is 1 because 0 causes problems for __clk_mux_determine_rate */
-+ clk = clk_register_fixed_rate(dev, "qsb", NULL, 0, 1);
-+ if (IS_ERR(clk))
-+ return PTR_ERR(clk);
-+
-+ if (!id->data) {
-+ clk = clk_register_fixed_factor(dev, "acpu_aux",
-+ "gpll0_vote", 0, 1, 2);
-+ if (IS_ERR(clk))
-+ return PTR_ERR(clk);
-+ }
-+
-+ /* Krait configurations have at most 4 CPUs and one L2 */
-+ clks = devm_kcalloc(dev, 5, sizeof(*clks), GFP_KERNEL);
-+ if (!clks)
-+ return -ENOMEM;
-+
-+ for_each_possible_cpu(cpu) {
-+ clk = krait_add_clks(dev, cpu, id->data);
-+ if (IS_ERR(clk))
-+ return PTR_ERR(clk);
-+ clks[cpu] = clk;
-+ }
-+
-+ l2_pri_mux_clk = krait_add_clks(dev, -1, id->data);
-+ if (IS_ERR(l2_pri_mux_clk))
-+ return PTR_ERR(l2_pri_mux_clk);
-+ clks[4] = l2_pri_mux_clk;
-+
-+ /*
-+ * We don't want the CPU or L2 clocks to be turned off at late init
-+ * if CPUFREQ or HOTPLUG configs are disabled. So, bump up the
-+ * refcount of these clocks. Any cpufreq/hotplug manager can assume
-+ * that the clocks have already been prepared and enabled by the time
-+ * they take over.
-+ */
-+ for_each_online_cpu(cpu) {
-+ clk_prepare_enable(l2_pri_mux_clk);
-+ WARN(clk_prepare_enable(clks[cpu]),
-+ "Unable to turn on CPU%d clock", cpu);
-+ }
-+
-+ /*
-+ * Force reinit of HFPLLs and muxes to overwrite any potential
-+ * incorrect configuration of HFPLLs and muxes by the bootloader.
-+ * While at it, also make sure the cores are running at known rates
-+ * and print the current rate.
-+ *
-+ * The clocks are set to aux clock rate first to make sure the
-+ * secondary mux is not sourcing off of QSB. The rate is then set to
-+ * two different rates to force a HFPLL reinit under all
-+ * circumstances.
-+ */
-+ cur_rate = clk_get_rate(l2_pri_mux_clk);
-+ aux_rate = 384000000;
-+ if (cur_rate == 1) {
-+ pr_info("L2 @ QSB rate. Forcing new rate.\n");
-+ cur_rate = aux_rate;
-+ }
-+ clk_set_rate(l2_pri_mux_clk, aux_rate);
-+ clk_set_rate(l2_pri_mux_clk, 2);
-+ clk_set_rate(l2_pri_mux_clk, cur_rate);
-+ pr_info("L2 @ %lu KHz\n", clk_get_rate(l2_pri_mux_clk) / 1000);
-+ for_each_possible_cpu(cpu) {
-+ clk = clks[cpu];
-+ cur_rate = clk_get_rate(clk);
-+ if (cur_rate == 1) {
-+ pr_info("CPU%d @ QSB rate. Forcing new rate.\n", cpu);
-+ cur_rate = aux_rate;
-+ }
-+
-+ clk_set_rate(clk, aux_rate);
-+ clk_set_rate(clk, 2);
-+ clk_set_rate(clk, cur_rate);
-+ pr_info("CPU%d @ %lu KHz\n", cpu, clk_get_rate(clk) / 1000);
-+ }
-+
-+ of_clk_add_provider(dev->of_node, krait_of_get, clks);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver krait_cc_driver = {
-+ .probe = krait_cc_probe,
-+ .driver = {
-+ .name = "krait-cc",
-+ .of_match_table = krait_cc_match_table,
-+ },
-+};
-+module_platform_driver(krait_cc_driver);
-+
-+MODULE_DESCRIPTION("Krait CPU Clock Driver");
-+MODULE_LICENSE("GPL v2");
-+MODULE_ALIAS("platform:krait-cc");
diff --git a/target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch b/target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch
deleted file mode 100644
index d0eddc64c2..0000000000
--- a/target/linux/ipq806x/patches-4.14/0044-clk-Add-safe-switch-hook.patch
+++ /dev/null
@@ -1,160 +0,0 @@
-From patchwork Fri Dec 8 09:42:28 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v4,10/12] clk: qcom: Add safe switch hook for krait mux clocks
-From: Sricharan R <sricharan@codeaurora.org>
-X-Patchwork-Id: 10102057
-Message-Id: <1512726150-7204-11-git-send-email-sricharan@codeaurora.org>
-To: mturquette@baylibre.com, sboyd@codeaurora.org,
- devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
-Cc: sricharan@codeaurora.org
-Date: Fri, 8 Dec 2017 15:12:28 +0530
-
-When the Hfplls are reprogrammed during the rate change,
-the primary muxes which are sourced from the same hfpll
-for higher frequencies, needs to be switched to the 'safe
-secondary mux' as the parent for that small window. This
-is done by registering a clk notifier for the muxes and
-switching to the safe parent in the PRE_RATE_CHANGE notifier
-and back to the original parent in the POST_RATE_CHANGE notifier.
-
-Signed-off-by: Sricharan R <sricharan@codeaurora.org>
----
- drivers/clk/qcom/clk-krait.c | 2 ++
- drivers/clk/qcom/clk-krait.h | 3 +++
- drivers/clk/qcom/krait-cc.c | 56 ++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 61 insertions(+)
-
---- a/drivers/clk/qcom/clk-krait.c
-+++ b/drivers/clk/qcom/clk-krait.c
-@@ -60,6 +60,8 @@ static int krait_mux_set_parent(struct c
- if (__clk_is_enabled(hw->clk))
- __krait_mux_set_sel(mux, sel);
-
-+ mux->reparent = true;
-+
- return 0;
- }
-
---- a/drivers/clk/qcom/clk-krait.h
-+++ b/drivers/clk/qcom/clk-krait.h
-@@ -23,6 +23,9 @@ struct krait_mux_clk {
- u32 shift;
- u32 en_mask;
- bool lpl;
-+ u8 safe_sel;
-+ u8 old_index;
-+ bool reparent;
-
- struct clk_hw hw;
- struct notifier_block clk_nb;
---- a/drivers/clk/qcom/krait-cc.c
-+++ b/drivers/clk/qcom/krait-cc.c
-@@ -35,6 +35,49 @@ static unsigned int pri_mux_map[] = {
- 0,
- };
-
-+/*
-+ * Notifier function for switching the muxes to safe parent
-+ * while the hfpll is getting reprogrammed.
-+ */
-+static int krait_notifier_cb(struct notifier_block *nb,
-+ unsigned long event,
-+ void *data)
-+{
-+ int ret = 0;
-+ struct krait_mux_clk *mux = container_of(nb, struct krait_mux_clk,
-+ clk_nb);
-+ /* Switch to safe parent */
-+ if (event == PRE_RATE_CHANGE) {
-+ mux->old_index = krait_mux_clk_ops.get_parent(&mux->hw);
-+ ret = krait_mux_clk_ops.set_parent(&mux->hw, mux->safe_sel);
-+ mux->reparent = false;
-+ /*
-+ * By the time POST_RATE_CHANGE notifier is called,
-+ * clk framework itself would have changed the parent for the new rate.
-+ * Only otherwise, put back to the old parent.
-+ */
-+ } else if (event == POST_RATE_CHANGE) {
-+ if (!mux->reparent)
-+ ret = krait_mux_clk_ops.set_parent(&mux->hw,
-+ mux->old_index);
-+ }
-+
-+ return notifier_from_errno(ret);
-+}
-+
-+static int krait_notifier_register(struct device *dev, struct clk *clk,
-+ struct krait_mux_clk *mux)
-+{
-+ int ret = 0;
-+
-+ mux->clk_nb.notifier_call = krait_notifier_cb;
-+ ret = clk_notifier_register(clk, &mux->clk_nb);
-+ if (ret)
-+ dev_err(dev, "failed to register clock notifier: %d\n", ret);
-+
-+ return ret;
-+}
-+
- static int
- krait_add_div(struct device *dev, int id, const char *s, unsigned int offset)
- {
-@@ -79,6 +122,7 @@ static int
- krait_add_sec_mux(struct device *dev, int id, const char *s,
- unsigned int offset, bool unique_aux)
- {
-+ int ret;
- struct krait_mux_clk *mux;
- static const char *sec_mux_list[] = {
- "acpu_aux",
-@@ -102,6 +146,7 @@ krait_add_sec_mux(struct device *dev, in
- mux->shift = 2;
- mux->parent_map = sec_mux_map;
- mux->hw.init = &init;
-+ mux->safe_sel = 0;
-
- init.name = kasprintf(GFP_KERNEL, "krait%s_sec_mux", s);
- if (!init.name)
-@@ -117,6 +162,11 @@ krait_add_sec_mux(struct device *dev, in
-
- clk = devm_clk_register(dev, &mux->hw);
-
-+ ret = krait_notifier_register(dev, clk, mux);
-+ if (ret)
-+ goto unique_aux;
-+
-+unique_aux:
- if (unique_aux)
- kfree(sec_mux_list[0]);
- err_aux:
-@@ -128,6 +178,7 @@ static struct clk *
- krait_add_pri_mux(struct device *dev, int id, const char *s,
- unsigned int offset)
- {
-+ int ret;
- struct krait_mux_clk *mux;
- const char *p_names[3];
- struct clk_init_data init = {
-@@ -148,6 +199,7 @@ krait_add_pri_mux(struct device *dev, in
- mux->lpl = id >= 0;
- mux->parent_map = pri_mux_map;
- mux->hw.init = &init;
-+ mux->safe_sel = 2;
-
- init.name = kasprintf(GFP_KERNEL, "krait%s_pri_mux", s);
- if (!init.name)
-@@ -173,6 +225,10 @@ krait_add_pri_mux(struct device *dev, in
-
- clk = devm_clk_register(dev, &mux->hw);
-
-+ ret = krait_notifier_register(dev, clk, mux);
-+ if (ret)
-+ goto err_p3;
-+err_p3:
- kfree(p_names[2]);
- err_p2:
- kfree(p_names[1]);
diff --git a/target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch b/target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
deleted file mode 100644
index 86cb4b9a3e..0000000000
--- a/target/linux/ipq806x/patches-4.14/0045-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
+++ /dev/null
@@ -1,307 +0,0 @@
-From patchwork Fri Dec 8 09:42:29 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v4,11/12] cpufreq: Add module to register cpufreq on Krait CPUs
-From: Sricharan R <sricharan@codeaurora.org>
-X-Patchwork-Id: 10102075
-Message-Id: <1512726150-7204-12-git-send-email-sricharan@codeaurora.org>
-To: mturquette@baylibre.com, sboyd@codeaurora.org,
- devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
-Cc: sricharan@codeaurora.org
-Date: Fri, 8 Dec 2017 15:12:29 +0530
-
-From: Stephen Boyd <sboyd@codeaurora.org>
-
-Register a cpufreq-generic device whenever we detect that a
-"qcom,krait" compatible CPU is present in DT.
-
-Cc: <devicetree@vger.kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- .../devicetree/bindings/arm/msm/qcom,pvs.txt | 38 ++++
- drivers/cpufreq/Kconfig.arm | 9 +
- drivers/cpufreq/Makefile | 1 +
- drivers/cpufreq/qcom-cpufreq.c | 204 +++++++++++++++++++++
- 4 files changed, 252 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt
- create mode 100644 drivers/cpufreq/qcom-cpufreq.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt
-@@ -0,0 +1,38 @@
-+Qualcomm Process Voltage Scaling Tables
-+
-+The node name is required to be "qcom,pvs". There shall only be one
-+such node present in the root of the tree.
-+
-+PROPERTIES
-+
-+- qcom,pvs-format-a or qcom,pvs-format-b:
-+ Usage: required
-+ Value type: <empty>
-+ Definition: Indicates the format of qcom,speedX-pvsY-bin-vZ properties.
-+ If qcom,pvs-format-a is used the table is two columns
-+ (frequency and voltage in that order). If qcom,pvs-format-b is used the table is three columns (frequency, voltage,
-+ and current in that order).
-+
-+- qcom,speedX-pvsY-bin-vZ:
-+ Usage: required
-+ Value type: <prop-encoded-array>
-+ Definition: The PVS table corresponding to the speed bin X, pvs bin Y,
-+ and version Z.
-+Example:
-+
-+ qcom,pvs {
-+ qcom,pvs-format-a;
-+ qcom,speed0-pvs0-bin-v0 =
-+ < 384000000 950000 >,
-+ < 486000000 975000 >,
-+ < 594000000 1000000 >,
-+ < 702000000 1025000 >,
-+ < 810000000 1075000 >,
-+ < 918000000 1100000 >,
-+ < 1026000000 1125000 >,
-+ < 1134000000 1175000 >,
-+ < 1242000000 1200000 >,
-+ < 1350000000 1225000 >,
-+ < 1458000000 1237500 >,
-+ < 1512000000 1250000 >;
-+ };
---- a/drivers/cpufreq/Kconfig.arm
-+++ b/drivers/cpufreq/Kconfig.arm
-@@ -100,6 +100,15 @@ config ARM_OMAP2PLUS_CPUFREQ
- depends on ARCH_OMAP2PLUS
- default ARCH_OMAP2PLUS
-
-+config ARM_QCOM_CPUFREQ
-+ tristate "Qualcomm based"
-+ depends on ARCH_QCOM
-+ select PM_OPP
-+ help
-+ This adds the CPUFreq driver for Qualcomm SoC based boards.
-+
-+ If in doubt, say N.
-+
- config ARM_S3C_CPUFREQ
- bool
- help
---- a/drivers/cpufreq/Makefile
-+++ b/drivers/cpufreq/Makefile
-@@ -62,6 +62,7 @@ obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ) += me
- obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
- obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o
- obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o
-+obj-$(CONFIG_ARM_QCOM_CPUFREQ) += qcom-cpufreq.o
- obj-$(CONFIG_ARM_S3C24XX_CPUFREQ) += s3c24xx-cpufreq.o
- obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
- obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o
---- /dev/null
-+++ b/drivers/cpufreq/qcom-cpufreq.c
-@@ -0,0 +1,204 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/cpu.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_opp.h>
-+#include <linux/slab.h>
-+#include "cpufreq-dt.h"
-+
-+static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver)
-+{
-+ void __iomem *base;
-+ u32 pte_efuse;
-+
-+ *speed = *pvs = *pvs_ver = 0;
-+
-+ base = ioremap(0x007000c0, 4);
-+ if (!base) {
-+ pr_warn("Unable to read efuse data. Defaulting to 0!\n");
-+ return;
-+ }
-+
-+ pte_efuse = readl_relaxed(base);
-+ iounmap(base);
-+
-+ *speed = pte_efuse & 0xf;
-+ if (*speed == 0xf)
-+ *speed = (pte_efuse >> 4) & 0xf;
-+
-+ if (*speed == 0xf) {
-+ *speed = 0;
-+ pr_warn("Speed bin: Defaulting to %d\n", *speed);
-+ } else {
-+ pr_info("Speed bin: %d\n", *speed);
-+ }
-+
-+ *pvs = (pte_efuse >> 10) & 0x7;
-+ if (*pvs == 0x7)
-+ *pvs = (pte_efuse >> 13) & 0x7;
-+
-+ if (*pvs == 0x7) {
-+ *pvs = 0;
-+ pr_warn("PVS bin: Defaulting to %d\n", *pvs);
-+ } else {
-+ pr_info("PVS bin: %d\n", *pvs);
-+ }
-+}
-+
-+static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver)
-+{
-+ u32 pte_efuse, redundant_sel;
-+ void __iomem *base;
-+
-+ *speed = 0;
-+ *pvs = 0;
-+ *pvs_ver = 0;
-+
-+ base = ioremap(0xfc4b80b0, 8);
-+ if (!base) {
-+ pr_warn("Unable to read efuse data. Defaulting to 0!\n");
-+ return;
-+ }
-+
-+ pte_efuse = readl_relaxed(base);
-+ redundant_sel = (pte_efuse >> 24) & 0x7;
-+ *speed = pte_efuse & 0x7;
-+ /* 4 bits of PVS are in efuse register bits 31, 8-6. */
-+ *pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
-+ *pvs_ver = (pte_efuse >> 4) & 0x3;
-+
-+ switch (redundant_sel) {
-+ case 1:
-+ *speed = (pte_efuse >> 27) & 0xf;
-+ break;
-+ case 2:
-+ *pvs = (pte_efuse >> 27) & 0xf;
-+ break;
-+ }
-+
-+ /* Check SPEED_BIN_BLOW_STATUS */
-+ if (pte_efuse & BIT(3)) {
-+ pr_info("Speed bin: %d\n", *speed);
-+ } else {
-+ pr_warn("Speed bin not set. Defaulting to 0!\n");
-+ *speed = 0;
-+ }
-+
-+ /* Check PVS_BLOW_STATUS */
-+ pte_efuse = readl_relaxed(base + 0x4) & BIT(21);
-+ if (pte_efuse) {
-+ pr_info("PVS bin: %d\n", *pvs);
-+ } else {
-+ pr_warn("PVS bin not set. Defaulting to 0!\n");
-+ *pvs = 0;
-+ }
-+
-+ pr_info("PVS version: %d\n", *pvs_ver);
-+ iounmap(base);
-+}
-+
-+static int __init qcom_cpufreq_populate_opps(void)
-+{
-+ int len, rows, cols, i, k, speed, pvs, pvs_ver;
-+ char table_name[] = "qcom,speedXX-pvsXX-bin-vXX";
-+ struct device_node *np;
-+ struct device *dev;
-+ int cpu = 0;
-+
-+ np = of_find_node_by_name(NULL, "qcom,pvs");
-+ if (!np)
-+ return -ENODEV;
-+
-+ if (of_property_read_bool(np, "qcom,pvs-format-a")) {
-+ get_krait_bin_format_a(&speed, &pvs, &pvs_ver);
-+ cols = 2;
-+ } else if (of_property_read_bool(np, "qcom,pvs-format-b")) {
-+ get_krait_bin_format_b(&speed, &pvs, &pvs_ver);
-+ cols = 3;
-+ } else {
-+ return -ENODEV;
-+ }
-+
-+ snprintf(table_name, sizeof(table_name),
-+ "qcom,speed%d-pvs%d-bin-v%d", speed, pvs, pvs_ver);
-+
-+ if (!of_find_property(np, table_name, &len))
-+ return -EINVAL;
-+
-+ len /= sizeof(u32);
-+ if (len % cols || len == 0)
-+ return -EINVAL;
-+
-+ rows = len / cols;
-+
-+ for (i = 0, k = 0; i < rows; i++) {
-+ u32 freq, volt;
-+
-+ of_property_read_u32_index(np, table_name, k++, &freq);
-+ of_property_read_u32_index(np, table_name, k++, &volt);
-+ while (k % cols)
-+ k++; /* Skip uA entries if present */
-+ for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
-+ dev = get_cpu_device(cpu);
-+ if (!dev)
-+ return -ENODEV;
-+ if (dev_pm_opp_add(dev, freq, volt))
-+ pr_warn("failed to add OPP %u\n", freq);
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+static int __init qcom_cpufreq_driver_init(void)
-+{
-+ struct cpufreq_dt_platform_data pdata = { .independent_clocks = true };
-+ struct platform_device_info devinfo = {
-+ .name = "cpufreq-dt",
-+ .data = &pdata,
-+ .size_data = sizeof(pdata),
-+ };
-+ struct device *cpu_dev;
-+ struct device_node *np;
-+ int ret;
-+
-+ cpu_dev = get_cpu_device(0);
-+ if (!cpu_dev)
-+ return -ENODEV;
-+
-+ np = of_node_get(cpu_dev->of_node);
-+ if (!np)
-+ return -ENOENT;
-+
-+ if (!of_device_is_compatible(np, "qcom,krait")) {
-+ of_node_put(np);
-+ return -ENODEV;
-+ }
-+ of_node_put(np);
-+
-+ ret = qcom_cpufreq_populate_opps();
-+ if (ret)
-+ return ret;
-+
-+ return PTR_ERR_OR_ZERO(platform_device_register_full(&devinfo));
-+}
-+module_init(qcom_cpufreq_driver_init);
-+
-+MODULE_DESCRIPTION("Qualcomm CPUfreq driver");
-+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch b/target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch
deleted file mode 100644
index b3b3072bcb..0000000000
--- a/target/linux/ipq806x/patches-4.14/0046-cpufreq-qcom-independent-core-clocks.patch
+++ /dev/null
@@ -1,66 +0,0 @@
-From patchwork Fri Dec 8 09:42:30 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v4,12/12] cpufreq: dt: Reintroduce independent_clocks platform data
-From: Sricharan R <sricharan@codeaurora.org>
-X-Patchwork-Id: 10102073
-Message-Id: <1512726150-7204-13-git-send-email-sricharan@codeaurora.org>
-To: mturquette@baylibre.com, sboyd@codeaurora.org,
- devicetree@vger.kernel.org, linux-pm@vger.kernel.org,
- linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
- viresh.kumar@linaro.org, linux-arm-kernel@lists.infradead.org
-Cc: sricharan@codeaurora.org
-Date: Fri, 8 Dec 2017 15:12:30 +0530
-
-The Platform data was removed earlier by,
-'commit eb96924acddc ("cpufreq: dt: Kill platform-data")'
-since there were no users at that time.
-Now this is required when the each of the cpu clocks
-can be scaled independently, which is the case
-for krait cores. So reintroduce it.
-
-Signed-off-by: Sricharan R <sricharan@codeaurora.org>
----
- drivers/cpufreq/cpufreq-dt.c | 7 ++++++-
- drivers/cpufreq/cpufreq-dt.h | 6 ++++++
- 2 files changed, 12 insertions(+), 1 deletion(-)
-
---- a/drivers/cpufreq/cpufreq-dt.c
-+++ b/drivers/cpufreq/cpufreq-dt.c
-@@ -231,7 +231,10 @@ static int cpufreq_init(struct cpufreq_p
- }
-
- if (fallback) {
-- cpumask_setall(policy->cpus);
-+ struct cpufreq_dt_platform_data *pd = cpufreq_get_driver_data();
-+
-+ if (!pd || !pd->independent_clocks)
-+ cpumask_setall(policy->cpus);
-
- /*
- * OPP tables are initialized only for policy->cpu, do it for
-@@ -376,6 +379,8 @@ static int dt_cpufreq_probe(struct platf
- if (data && data->have_governor_per_policy)
- dt_cpufreq_driver.flags |= CPUFREQ_HAVE_GOVERNOR_PER_POLICY;
-
-+ dt_cpufreq_driver.driver_data = data;
-+
- ret = cpufreq_register_driver(&dt_cpufreq_driver);
- if (ret)
- dev_err(&pdev->dev, "failed register driver: %d\n", ret);
---- a/drivers/cpufreq/cpufreq-dt.h
-+++ b/drivers/cpufreq/cpufreq-dt.h
-@@ -13,6 +13,12 @@
- #include <linux/types.h>
-
- struct cpufreq_dt_platform_data {
-+ /*
-+ * True when each CPU has its own clock to control its
-+ * frequency, false when all CPUs are controlled by a single
-+ * clock.
-+ */
-+ bool independent_clocks;
- bool have_governor_per_policy;
- };
-
diff --git a/target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch b/target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch
deleted file mode 100644
index fe98980766..0000000000
--- a/target/linux/ipq806x/patches-4.14/0047-mtd-nand-Create-a-BBT-flag-to-access-bad-block-marke.patch
+++ /dev/null
@@ -1,72 +0,0 @@
-From c7c6a0f50f9ac3620c611ce06ba1f9fafea0444e Mon Sep 17 00:00:00 2001
-From: Archit Taneja <architt@codeaurora.org>
-Date: Mon, 3 Aug 2015 10:38:14 +0530
-Subject: [PATCH 47/69] mtd: nand: Create a BBT flag to access bad block
- markers in raw mode
-
-Some controllers can access the factory bad block marker from OOB only
-when they read it in raw mode. When ECC is enabled, these controllers
-discard reading/writing bad block markers, preventing access to them
-altogether.
-
-The bbt driver assumes MTD_OPS_PLACE_OOB when scanning for bad blocks.
-This results in the nand driver's ecc->read_oob() op to be called, which
-works with ECC enabled.
-
-Create a new BBT option flag that tells nand_bbt to force the mode to
-MTD_OPS_RAW. This would result in the correct op being called for the
-underlying nand controller driver.
-
-Reviewed-by: Andy Gross <agross@codeaurora.org>
-Signed-off-by: Archit Taneja <architt@codeaurora.org>
----
- drivers/mtd/nand/nand_base.c | 6 +++++-
- drivers/mtd/nand/nand_bbt.c | 6 +++++-
- include/linux/mtd/bbm.h | 6 ++++++
- 3 files changed, 16 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -481,7 +481,11 @@ static int nand_default_block_markbad(st
- } else {
- ops.len = ops.ooblen = 1;
- }
-- ops.mode = MTD_OPS_PLACE_OOB;
-+
-+ if (unlikely(chip->bbt_options & NAND_BBT_ACCESS_BBM_RAW))
-+ ops.mode = MTD_OPS_RAW;
-+ else
-+ ops.mode = MTD_OPS_PLACE_OOB;
-
- /* Write to first/last page(s) if necessary */
- if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
---- a/drivers/mtd/nand/nand_bbt.c
-+++ b/drivers/mtd/nand/nand_bbt.c
-@@ -420,7 +420,11 @@ static int scan_block_fast(struct mtd_in
- ops.oobbuf = buf;
- ops.ooboffs = 0;
- ops.datbuf = NULL;
-- ops.mode = MTD_OPS_PLACE_OOB;
-+
-+ if (unlikely(bd->options & NAND_BBT_ACCESS_BBM_RAW))
-+ ops.mode = MTD_OPS_RAW;
-+ else
-+ ops.mode = MTD_OPS_PLACE_OOB;
-
- for (j = 0; j < numpages; j++) {
- /*
---- a/include/linux/mtd/bbm.h
-+++ b/include/linux/mtd/bbm.h
-@@ -116,6 +116,12 @@ struct nand_bbt_descr {
- #define NAND_BBT_NO_OOB_BBM 0x00080000
-
- /*
-+ * Force MTD_OPS_RAW mode when trying to access bad block markes from OOB. To
-+ * be used by controllers which can access BBM only when ECC is disabled, i.e,
-+ * when in RAW access mode
-+ */
-+#define NAND_BBT_ACCESS_BBM_RAW 0x00100000
-+/*
- * Flag set by nand_create_default_bbt_descr(), marking that the nand_bbt_descr
- * was allocated dynamicaly and must be freed in nand_release(). Has no meaning
- * in nand_chip.bbt_options.
diff --git a/target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch b/target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch
deleted file mode 100644
index 7c78d444f8..0000000000
--- a/target/linux/ipq806x/patches-4.14/0048-PM-OPP-HACK-Allow-to-set-regulator-without-opp_list.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 5c294df1715d673f94f3b0a6e1ea3a426ca35e6e Mon Sep 17 00:00:00 2001
-From: Georgi Djakov <georgi.djakov@linaro.org>
-Date: Thu, 28 Apr 2016 16:20:12 +0300
-Subject: [PATCH 48/69] PM / OPP: HACK: Allow to set regulator without opp_list
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- drivers/base/power/opp/core.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/base/power/opp/core.c
-+++ b/drivers/base/power/opp/core.c
-@@ -1280,11 +1280,13 @@ struct opp_table *dev_pm_opp_set_regulat
- if (!opp_table)
- return ERR_PTR(-ENOMEM);
-
-+#if 0
- /* This should be called before OPPs are initialized */
- if (WARN_ON(!list_empty(&opp_table->opp_list))) {
- ret = -EBUSY;
- goto err;
- }
-+#endif
-
- /* Already have regulators set */
- if (opp_table->regulators) {
diff --git a/target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch b/target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch
deleted file mode 100644
index ef48e9f01b..0000000000
--- a/target/linux/ipq806x/patches-4.14/0049-PM-OPP-Support-adjusting-OPP-voltages-at-runtime.patch
+++ /dev/null
@@ -1,147 +0,0 @@
-From c949f08cf20fe82971fbdb4015daa38210da492e Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Fri, 18 Sep 2015 17:52:06 -0700
-Subject: [PATCH 49/69] PM / OPP: Support adjusting OPP voltages at runtime
-
-On some SoCs the Adaptive Voltage Scaling (AVS) technique is
-employed to optimize the operating voltage of a device. At a
-given frequency, the hardware monitors dynamic factors and either
-makes a suggestion for how much to adjust a voltage for the
-current frequency, or it automatically adjusts the voltage
-without software intervention. Add an API to the OPP library for
-the former case, so that AVS type devices can update the voltages
-for an OPP when the hardware determines the voltage should
-change. The assumption is that drivers like CPUfreq or devfreq
-will register for the OPP notifiers and adjust the voltage
-according to suggestions that AVS makes.
-
-Cc: Nishanth Menon <nm@ti.com>
-Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- drivers/base/power/opp/core.c | 77 +++++++++++++++++++++++++++++++++++++++++++
- include/linux/pm_opp.h | 11 +++++++
- 2 files changed, 88 insertions(+)
-
---- a/drivers/base/power/opp/core.c
-+++ b/drivers/base/power/opp/core.c
-@@ -1608,6 +1608,83 @@ put_table:
- }
-
- /**
-+ * dev_pm_opp_adjust_voltage() - helper to change the voltage of an OPP
-+ * @dev: device for which we do this operation
-+ * @freq: OPP frequency to adjust voltage of
-+ * @u_volt: new OPP voltage
-+ *
-+ * Change the voltage of an OPP with an RCU operation.
-+ *
-+ * Return: -EINVAL for bad pointers, -ENOMEM if no memory available for the
-+ * copy operation, returns 0 if no modifcation was done OR modification was
-+ * successful.
-+ *
-+ * Locking: The internal device_opp and opp structures are RCU protected.
-+ * Hence this function internally uses RCU updater strategy with mutex locks to
-+ * keep the integrity of the internal data structures. Callers should ensure
-+ * that this function is *NOT* called under RCU protection or in contexts where
-+ * mutex locking or synchronize_rcu() blocking calls cannot be used.
-+ */
-+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
-+ unsigned long u_volt)
-+{
-+ struct opp_table *opp_table;
-+ struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
-+ int r = 0;
-+
-+ /* keep the node allocated */
-+ new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
-+ if (!new_opp)
-+ return -ENOMEM;
-+
-+ mutex_lock(&opp_table_lock);
-+
-+ /* Find the opp_table */
-+ opp_table = _find_opp_table(dev);
-+ if (IS_ERR(opp_table)) {
-+ r = PTR_ERR(opp_table);
-+ dev_warn(dev, "%s: Device OPP not found (%d)\n", __func__, r);
-+ goto unlock;
-+ }
-+
-+ /* Do we have the frequency? */
-+ list_for_each_entry(tmp_opp, &opp_table->opp_list, node) {
-+ if (tmp_opp->rate == freq) {
-+ opp = tmp_opp;
-+ break;
-+ }
-+ }
-+ if (IS_ERR(opp)) {
-+ r = PTR_ERR(opp);
-+ goto unlock;
-+ }
-+
-+ /* Is update really needed? */
-+ if (opp->supplies[0].u_volt == u_volt)
-+ goto unlock;
-+ /* copy the old data over */
-+ *new_opp = *opp;
-+
-+ /* plug in new node */
-+ new_opp->supplies[0].u_volt = u_volt;
-+
-+ list_replace(&opp->node, &new_opp->node);
-+ mutex_unlock(&opp_table_lock);
-+ kfree(opp);
-+
-+ /* Notify the change of the OPP */
-+ blocking_notifier_call_chain(&opp_table->head, OPP_EVENT_ADJUST_VOLTAGE,
-+ new_opp);
-+
-+ return 0;
-+
-+unlock:
-+ mutex_unlock(&opp_table_lock);
-+ kfree(new_opp);
-+ return r;
-+}
-+
-+/**
- * dev_pm_opp_enable() - Enable a specific OPP
- * @dev: device for which we do this operation
- * @freq: OPP frequency to enable
---- a/include/linux/pm_opp.h
-+++ b/include/linux/pm_opp.h
-@@ -25,6 +25,7 @@ struct opp_table;
-
- enum dev_pm_opp_event {
- OPP_EVENT_ADD, OPP_EVENT_REMOVE, OPP_EVENT_ENABLE, OPP_EVENT_DISABLE,
-+ OPP_EVENT_ADJUST_VOLTAGE,
- };
-
- /**
-@@ -108,6 +109,9 @@ int dev_pm_opp_add(struct device *dev, u
- unsigned long u_volt);
- void dev_pm_opp_remove(struct device *dev, unsigned long freq);
-
-+int dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
-+ unsigned long u_volt);
-+
- int dev_pm_opp_enable(struct device *dev, unsigned long freq);
-
- int dev_pm_opp_disable(struct device *dev, unsigned long freq);
-@@ -208,6 +212,13 @@ static inline void dev_pm_opp_remove(str
- {
- }
-
-+static inline int
-+dev_pm_opp_adjust_voltage(struct device *dev, unsigned long freq,
-+ unsigned long u_volt)
-+{
-+ return 0;
-+}
-+
- static inline int dev_pm_opp_enable(struct device *dev, unsigned long freq)
- {
- return 0;
diff --git a/target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch b/target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch
deleted file mode 100644
index 22ae309801..0000000000
--- a/target/linux/ipq806x/patches-4.14/0051-PM-OPP-Add-a-helper-to-get-an-opp-regulator-for-devi.patch
+++ /dev/null
@@ -1,52 +0,0 @@
-From d06ca5e7a3cf726f5be5ffd96e93ccd798b8c09a Mon Sep 17 00:00:00 2001
-From: Georgi Djakov <georgi.djakov@linaro.org>
-Date: Thu, 12 May 2016 14:41:33 +0300
-Subject: [PATCH 51/69] PM / OPP: Add a helper to get an opp regulator for
- device
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- drivers/base/power/opp/core.c | 21 +++++++++++++++++++++
- include/linux/pm_opp.h | 1 +
- 2 files changed, 22 insertions(+)
-
---- a/drivers/base/power/opp/core.c
-+++ b/drivers/base/power/opp/core.c
-@@ -126,6 +126,27 @@ unsigned long dev_pm_opp_get_freq(struct
- }
- EXPORT_SYMBOL_GPL(dev_pm_opp_get_freq);
-
-+struct regulator *dev_pm_opp_get_regulator(struct device *dev)
-+{
-+ struct opp_table *opp_table;
-+ struct regulator *reg;
-+
-+ rcu_read_lock();
-+
-+ opp_table = _find_opp_table(dev);
-+ if (IS_ERR(opp_table)) {
-+ rcu_read_unlock();
-+ return ERR_CAST(opp_table);
-+ }
-+
-+ reg = opp_table->regulators[0];
-+
-+ rcu_read_unlock();
-+
-+ return reg;
-+}
-+EXPORT_SYMBOL_GPL(dev_pm_opp_get_regulator);
-+
- /**
- * dev_pm_opp_is_turbo() - Returns if opp is turbo OPP or not
- * @opp: opp for which turbo mode is being verified
---- a/include/linux/pm_opp.h
-+++ b/include/linux/pm_opp.h
-@@ -85,6 +85,7 @@ void dev_pm_opp_put_opp_table(struct opp
- unsigned long dev_pm_opp_get_voltage(struct dev_pm_opp *opp);
-
- unsigned long dev_pm_opp_get_freq(struct dev_pm_opp *opp);
-+struct regulator *dev_pm_opp_get_regulator(struct device *dev);
-
- bool dev_pm_opp_is_turbo(struct dev_pm_opp *opp);
-
diff --git a/target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch b/target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch
deleted file mode 100644
index 7cde22be0b..0000000000
--- a/target/linux/ipq806x/patches-4.14/0052-PM-OPP-Update-the-voltage-tolerance-when-adjusting-t.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 4533c285c2aedce6d4434d7b877066de3b1ecb33 Mon Sep 17 00:00:00 2001
-From: Georgi Djakov <georgi.djakov@linaro.org>
-Date: Thu, 25 Aug 2016 18:43:35 +0300
-Subject: [PATCH 52/69] PM / OPP: Update the voltage tolerance when adjusting
- the OPP
-
-When the voltage is adjusted, the voltage tolerance is not updated.
-This can lead to situations where the voltage min value is greater
-than the voltage max value. The final result is triggering a BUG()
-in the regulator core.
-Fix this by updating the voltage tolerance values too.
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- drivers/base/power/opp/core.c | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/drivers/base/power/opp/core.c
-+++ b/drivers/base/power/opp/core.c
-@@ -1652,6 +1652,7 @@ int dev_pm_opp_adjust_voltage(struct dev
- struct opp_table *opp_table;
- struct dev_pm_opp *new_opp, *tmp_opp, *opp = ERR_PTR(-ENODEV);
- int r = 0;
-+ unsigned long tol;
-
- /* keep the node allocated */
- new_opp = kmalloc(sizeof(*new_opp), GFP_KERNEL);
-@@ -1688,6 +1689,10 @@ int dev_pm_opp_adjust_voltage(struct dev
-
- /* plug in new node */
- new_opp->supplies[0].u_volt = u_volt;
-+ tol = u_volt * opp_table->voltage_tolerance_v1 / 100;
-+ new_opp->supplies[0].u_volt = u_volt;
-+ new_opp->supplies[0].u_volt_min = u_volt - tol;
-+ new_opp->supplies[0].u_volt_max = u_volt + tol;
-
- list_replace(&opp->node, &new_opp->node);
- mutex_unlock(&opp_table_lock);
diff --git a/target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch b/target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch
deleted file mode 100644
index 0d2862c609..0000000000
--- a/target/linux/ipq806x/patches-4.14/0053-regulator-add-smb208-support.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From ef10381ca4d01848ebedb4afb2c78feb8052f103 Mon Sep 17 00:00:00 2001
-From: Adrian Panella <ianchi74@outlook.com>
-Date: Thu, 9 Mar 2017 08:26:54 +0100
-Subject: [PATCH 53/69] regulator: add smb208 support
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
----
- Documentation/devicetree/bindings/mfd/qcom-rpm.txt | 4 ++++
- drivers/regulator/qcom_rpm-regulator.c | 9 +++++++++
- 2 files changed, 13 insertions(+)
-
---- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
-+++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt
-@@ -61,6 +61,7 @@ Regulator nodes are identified by their
- "qcom,rpm-pm8901-regulators"
- "qcom,rpm-pm8921-regulators"
- "qcom,rpm-pm8018-regulators"
-+ "qcom,rpm-smb208-regulators"
-
- - vdd_l0_l1_lvs-supply:
- - vdd_l2_l11_l12-supply:
-@@ -171,6 +172,9 @@ pm8018:
- s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
- l12, l14, lvs1
-
-+smb208:
-+ s1a, s1b, s2a, s2b
-+
- The content of each sub-node is defined by the standard binding for regulators -
- see regulator.txt - with additional custom properties described below:
-
---- a/drivers/regulator/qcom_rpm-regulator.c
-+++ b/drivers/regulator/qcom_rpm-regulator.c
-@@ -933,12 +933,21 @@ static const struct rpm_regulator_data r
- { }
- };
-
-+static const struct rpm_regulator_data rpm_smb208_regulators[] = {
-+ { "s1a", QCOM_RPM_SMB208_S1a, &smb208_smps, "vin_s1a" },
-+ { "s1b", QCOM_RPM_SMB208_S1b, &smb208_smps, "vin_s1b" },
-+ { "s2a", QCOM_RPM_SMB208_S2a, &smb208_smps, "vin_s2a" },
-+ { "s2b", QCOM_RPM_SMB208_S2b, &smb208_smps, "vin_s2b" },
-+ { }
-+};
-+
- static const struct of_device_id rpm_of_match[] = {
- { .compatible = "qcom,rpm-pm8018-regulators",
- .data = &rpm_pm8018_regulators },
- { .compatible = "qcom,rpm-pm8058-regulators", .data = &rpm_pm8058_regulators },
- { .compatible = "qcom,rpm-pm8901-regulators", .data = &rpm_pm8901_regulators },
- { .compatible = "qcom,rpm-pm8921-regulators", .data = &rpm_pm8921_regulators },
-+ { .compatible = "qcom,rpm-smb208-regulators", .data = &rpm_smb208_regulators },
- { }
- };
- MODULE_DEVICE_TABLE(of, rpm_of_match);
diff --git a/target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch b/target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch
deleted file mode 100644
index dcf0bcd3f2..0000000000
--- a/target/linux/ipq806x/patches-4.14/0054-cpufreq-dt-Handle-OPP-voltage-adjust-events.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 10577f74c35bd395951d1b2382c8d821089b5745 Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Fri, 18 Sep 2015 17:52:08 -0700
-Subject: [PATCH 54/69] cpufreq-dt: Handle OPP voltage adjust events
-
-On some SoCs the Adaptive Voltage Scaling (AVS) technique is
-employed to optimize the operating voltage of a device. At a
-given frequency, the hardware monitors dynamic factors and either
-makes a suggestion for how much to adjust a voltage for the
-current frequency, or it automatically adjusts the voltage
-without software intervention.
-
-In the former case, an AVS driver will call
-dev_pm_opp_modify_voltage() and update the voltage for the
-particular OPP the CPUs are using. Add an OPP notifier to
-cpufreq-dt so that we can adjust the voltage of the CPU when AVS
-updates the OPP.
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- drivers/cpufreq/cpufreq-dt.c | 68 ++++++++++++++++++++++++++++++++++++++++++--
- 1 file changed, 65 insertions(+), 3 deletions(-)
-
---- a/drivers/cpufreq/cpufreq-dt.c
-+++ b/drivers/cpufreq/cpufreq-dt.c
-@@ -32,6 +32,9 @@ struct private_data {
- struct device *cpu_dev;
- struct thermal_cooling_device *cdev;
- const char *reg_name;
-+ struct notifier_block opp_nb;
-+ struct mutex lock;
-+ unsigned long opp_freq;
- bool have_static_opps;
- };
-
-@@ -44,9 +47,16 @@ static struct freq_attr *cpufreq_dt_attr
- static int set_target(struct cpufreq_policy *policy, unsigned int index)
- {
- struct private_data *priv = policy->driver_data;
-+ int ret;
-+ unsigned long target_freq = policy->freq_table[index].frequency * 1000;
-+
-+ mutex_lock(&priv->lock);
-+ ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq);
-+ if (!ret)
-+ priv->opp_freq = target_freq;
-+ mutex_unlock(&priv->lock);
-
-- return dev_pm_opp_set_rate(priv->cpu_dev,
-- policy->freq_table[index].frequency * 1000);
-+ return ret;
- }
-
- /*
-@@ -87,6 +97,39 @@ node_put:
- return name;
- }
-
-+static int opp_notifier(struct notifier_block *nb, unsigned long event,
-+ void *data)
-+{
-+ struct dev_pm_opp *opp = data;
-+ struct private_data *priv = container_of(nb, struct private_data,
-+ opp_nb);
-+ struct device *cpu_dev = priv->cpu_dev;
-+ struct regulator *cpu_reg;
-+ unsigned long volt, freq;
-+ int ret = 0;
-+
-+ if (event == OPP_EVENT_ADJUST_VOLTAGE) {
-+ cpu_reg = dev_pm_opp_get_regulator(cpu_dev);
-+ if (IS_ERR(cpu_reg)) {
-+ ret = PTR_ERR(cpu_reg);
-+ goto out;
-+ }
-+ volt = dev_pm_opp_get_voltage(opp);
-+ freq = dev_pm_opp_get_freq(opp);
-+
-+ mutex_lock(&priv->lock);
-+ if (freq == priv->opp_freq) {
-+ ret = regulator_set_voltage_triplet(cpu_reg, volt, volt, volt);
-+ }
-+ mutex_unlock(&priv->lock);
-+ if (ret)
-+ dev_err(cpu_dev, "failed to scale voltage: %d\n", ret);
-+ }
-+
-+out:
-+ return notifier_from_errno(ret);
-+}
-+
- static int resources_available(void)
- {
- struct device *cpu_dev;
-@@ -153,6 +196,7 @@ static int cpufreq_init(struct cpufreq_p
- bool fallback = false;
- const char *name;
- int ret;
-+ struct srcu_notifier_head *opp_srcu_head;
-
- cpu_dev = get_cpu_device(policy->cpu);
- if (!cpu_dev) {
-@@ -246,10 +290,13 @@ static int cpufreq_init(struct cpufreq_p
- __func__, ret);
- }
-
-+ mutex_init(&priv->lock);
-+ dev_pm_opp_register_notifier(cpu_dev, &priv->opp_nb);
-+
- ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
- if (ret) {
- dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
-- goto out_free_opp;
-+ goto out_unregister_nb;
- }
-
- priv->cpu_dev = cpu_dev;
-@@ -285,6 +332,8 @@ static int cpufreq_init(struct cpufreq_p
-
- out_free_cpufreq_table:
- dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
-+out_unregister_nb:
-+ dev_pm_opp_unregister_notifier(cpu_dev, &priv->opp_nb);
- out_free_opp:
- if (priv->have_static_opps)
- dev_pm_opp_of_cpumask_remove_table(policy->cpus);
diff --git a/target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch b/target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch
deleted file mode 100644
index 1c26650b78..0000000000
--- a/target/linux/ipq806x/patches-4.14/0055-cpufreq-dt-Add-L2-frequency-scaling-support.patch
+++ /dev/null
@@ -1,90 +0,0 @@
-From 0759cdff49f1cf361bf503c13f7bcb33da43ab95 Mon Sep 17 00:00:00 2001
-From: Georgi Djakov <georgi.djakov@linaro.org>
-Date: Tue, 8 Sep 2015 11:24:41 +0300
-Subject: [PATCH 55/69] cpufreq-dt: Add L2 frequency scaling support
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- drivers/cpufreq/cpufreq-dt.c | 41 ++++++++++++++++++++++++++++++++++++++++-
- include/linux/cpufreq.h | 2 ++
- 2 files changed, 42 insertions(+), 1 deletion(-)
-
---- a/drivers/cpufreq/cpufreq-dt.c
-+++ b/drivers/cpufreq/cpufreq-dt.c
-@@ -49,11 +49,41 @@ static int set_target(struct cpufreq_pol
- struct private_data *priv = policy->driver_data;
- int ret;
- unsigned long target_freq = policy->freq_table[index].frequency * 1000;
-+ struct clk *l2_clk = policy->l2_clk;
-+ unsigned int l2_freq;
-+ unsigned long new_l2_freq = 0;
-
- mutex_lock(&priv->lock);
- ret = dev_pm_opp_set_rate(priv->cpu_dev, target_freq);
-- if (!ret)
-+
-+ if (!ret) {
-+ if (!IS_ERR(l2_clk) && policy->l2_rate[0] && policy->l2_rate[1] &&
-+ policy->l2_rate[2]) {
-+ static unsigned long krait_l2[CONFIG_NR_CPUS] = { };
-+ int cpu, ret = 0;
-+
-+ if (target_freq >= policy->l2_rate[2])
-+ new_l2_freq = policy->l2_rate[2];
-+ else if (target_freq >= policy->l2_rate[1])
-+ new_l2_freq = policy->l2_rate[1];
-+ else
-+ new_l2_freq = policy->l2_rate[0];
-+
-+ krait_l2[policy->cpu] = new_l2_freq;
-+ for_each_present_cpu(cpu)
-+ new_l2_freq = max(new_l2_freq, krait_l2[cpu]);
-+
-+ l2_freq = clk_get_rate(l2_clk);
-+
-+ if (l2_freq != new_l2_freq) {
-+ /* scale l2 with the core */
-+ ret = clk_set_rate(l2_clk, new_l2_freq);
-+ }
-+ }
-+
- priv->opp_freq = target_freq;
-+ }
-+
- mutex_unlock(&priv->lock);
-
- return ret;
-@@ -197,6 +227,8 @@ static int cpufreq_init(struct cpufreq_p
- const char *name;
- int ret;
- struct srcu_notifier_head *opp_srcu_head;
-+ struct device_node *l2_np;
-+ struct clk *l2_clk = NULL;
-
- cpu_dev = get_cpu_device(policy->cpu);
- if (!cpu_dev) {
-@@ -305,6 +337,13 @@ static int cpufreq_init(struct cpufreq_p
-
- policy->suspend_freq = dev_pm_opp_get_suspend_opp_freq(cpu_dev) / 1000;
-
-+ l2_clk = clk_get(cpu_dev, "l2");
-+ if (!IS_ERR(l2_clk))
-+ policy->l2_clk = l2_clk;
-+ l2_np = of_find_node_by_name(NULL, "qcom,l2");
-+ if (l2_np)
-+ of_property_read_u32_array(l2_np, "qcom,l2-rates", policy->l2_rate, 3);
-+
- ret = cpufreq_table_validate_and_show(policy, freq_table);
- if (ret) {
- dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
---- a/include/linux/cpufreq.h
-+++ b/include/linux/cpufreq.h
-@@ -73,6 +73,8 @@ struct cpufreq_policy {
- unsigned int cpu; /* cpu managing this policy, must be online */
-
- struct clk *clk;
-+ struct clk *l2_clk; /* L2 clock */
-+ unsigned int l2_rate[3]; /* L2 bus clock rate thresholds */
- struct cpufreq_cpuinfo cpuinfo;/* see above */
-
- unsigned int min; /* in kHz */
diff --git a/target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch b/target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch
deleted file mode 100644
index d9d76e409b..0000000000
--- a/target/linux/ipq806x/patches-4.14/0056-cpufreq-dt-Add-missing-rcu-locks.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 001a8dcb56ced58c518aaa10a4f0ba5e878705b6 Mon Sep 17 00:00:00 2001
-From: Georgi Djakov <georgi.djakov@linaro.org>
-Date: Tue, 17 May 2016 16:15:43 +0300
-Subject: [PATCH 56/69] cpufreq-dt: Add missing rcu locks
-
-Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
----
- drivers/cpufreq/cpufreq-dt.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/cpufreq/cpufreq-dt.c
-+++ b/drivers/cpufreq/cpufreq-dt.c
-@@ -144,8 +144,10 @@ static int opp_notifier(struct notifier_
- ret = PTR_ERR(cpu_reg);
- goto out;
- }
-+ rcu_read_lock();
- volt = dev_pm_opp_get_voltage(opp);
- freq = dev_pm_opp_get_freq(opp);
-+ rcu_read_unlock();
-
- mutex_lock(&priv->lock);
- if (freq == priv->opp_freq) {
diff --git a/target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch b/target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch
deleted file mode 100644
index 5bd58c8137..0000000000
--- a/target/linux/ipq806x/patches-4.14/0059-ARM-cpuidle-Add-cpuidle-support-for-QCOM-cpus.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 04ca10340f1b4d92e849724d322a7ca225d11539 Mon Sep 17 00:00:00 2001
-From: Lina Iyer <lina.iyer@linaro.org>
-Date: Wed, 25 Mar 2015 14:25:29 -0600
-Subject: [PATCH 59/69] ARM: cpuidle: Add cpuidle support for QCOM cpus
-
-Define ARM_QCOM_CPUIDLE config item to enable cpuidle support.
-
-Cc: Stephen Boyd <sboyd@codeaurora.org>
-Cc: Arnd Bergmann <arnd@arndb.de>
-Cc: Kevin Hilman <khilman@linaro.org>
-Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
-Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
----
- drivers/cpuidle/Kconfig.arm | 7 +++++++
- 1 file changed, 7 insertions(+)
-
---- a/drivers/cpuidle/Kconfig.arm
-+++ b/drivers/cpuidle/Kconfig.arm
-@@ -75,3 +75,10 @@ config ARM_MVEBU_V7_CPUIDLE
- depends on ARCH_MVEBU && !ARM64
- help
- Select this to enable cpuidle on Armada 370, 38x and XP processors.
-+
-+config ARM_QCOM_CPUIDLE
-+ bool "CPU Idle Driver for QCOM processors"
-+ depends on ARCH_QCOM
-+ select ARM_CPUIDLE
-+ help
-+ Select this to enable cpuidle on QCOM processors.
diff --git a/target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch b/target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch
deleted file mode 100644
index 581761f580..0000000000
--- a/target/linux/ipq806x/patches-4.14/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From fa71139b55e114aa8c3c4823ff8ee7d49ee810d4 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Wed, 29 Apr 2015 15:21:46 -0700
-Subject: [PATCH 60/69] HACK: arch: arm: force ZRELADDR on arch-qcom
-
-ARCH_QCOM is using the ARCH_MULTIPLATFORM option, as now recommended
-on most ARM architectures. This automatically calculate ZRELADDR by
-masking PHYS_OFFSET with 0xf8000000.
-
-However, on IPQ806x, the first ~20MB of RAM is reserved for the hardware
-network accelerators, and the bootloader removes this section from the
-layout passed from the ATAGS (when used).
-
-For newer bootloader, when DT is used, this is not a problem, we just
-reserve this memory in the device tree. But if the bootloader doesn't
-have DT support, then ATAGS have to be used. In this case, the ARM
-decompressor will position the kernel in this low mem, which will not be
-in the RAM section mapped by the bootloader, which means the kernel will
-freeze in the middle of the boot process trying to map the memory.
-
-As a work around, this patch allows disabling AUTO_ZRELADDR when
-ARCH_QCOM is selected. It makes the zImage usage possible on bootloaders
-which don't support device-tree, which is the case on certain early
-IPQ806x based designs.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- arch/arm/Kconfig | 2 +-
- arch/arm/Makefile | 2 ++
- arch/arm/mach-qcom/Makefile.boot | 1 +
- 3 files changed, 4 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/mach-qcom/Makefile.boot
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -341,7 +341,7 @@ config ARCH_MULTIPLATFORM
- depends on MMU
- select ARM_HAS_SG_CHAIN
- select ARM_PATCH_PHYS_VIRT
-- select AUTO_ZRELADDR
-+ select AUTO_ZRELADDR if !ARCH_QCOM
- select TIMER_OF
- select COMMON_CLK
- select GENERIC_CLOCKEVENTS
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -257,9 +257,11 @@ MACHINE := arch/arm/mach-$(word 1,$(mac
- else
- MACHINE :=
- endif
-+ifeq ($(CONFIG_ARCH_QCOM),)
- ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y)
- MACHINE :=
- endif
-+endif
-
- machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y))
- platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y)))
---- /dev/null
-+++ b/arch/arm/mach-qcom/Makefile.boot
-@@ -0,0 +1 @@
-+zreladdr-y+= 0x42208000
diff --git a/target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch b/target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch
deleted file mode 100644
index a4a957545b..0000000000
--- a/target/linux/ipq806x/patches-4.14/0061-mtd-rootfs-conflicts-with-OpenWrt-auto-mounting.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 5001f2e1a325b68dbf225bd17f69a4d3d975cca5 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 9 Mar 2017 09:31:44 +0100
-Subject: [PATCH 61/69] mtd: "rootfs" conflicts with OpenWrt auto mounting
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- drivers/mtd/qcom_smem_part.c | 4 ++++
- 1 file changed, 4 insertions(+)
-
---- a/drivers/mtd/qcom_smem_part.c
-+++ b/drivers/mtd/qcom_smem_part.c
-@@ -189,6 +189,10 @@ static int parse_qcom_smem_partitions(st
- m_part->size = le32_to_cpu(s_part->size) * (*smem_blksz);
- m_part->offset = le32_to_cpu(s_part->start) * (*smem_blksz);
-
-+ /* "rootfs" conflicts with OpenWrt auto mounting */
-+ if (mtd_type_is_nand(master) && !strcmp(m_part->name, "rootfs"))
-+ m_part->name = "ubi";
-+
- /*
- * The last SMEM partition may have its size marked as
- * something like 0xffffffff, which means "until the end of the
diff --git a/target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch b/target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch
deleted file mode 100644
index 717934315a..0000000000
--- a/target/linux/ipq806x/patches-4.14/0062-ipq806x-gcc-Added-the-enable-regs-and-mask-for-PRNG.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From a16fcf911a020e46439a3bb3e702463fc3159831 Mon Sep 17 00:00:00 2001
-From: Abhishek Sahu <absahu@codeaurora.org>
-Date: Wed, 18 Nov 2015 12:38:56 +0530
-Subject: [PATCH 62/69] ipq806x: gcc: Added the enable regs and mask for PRNG
-
-kernel got hanged while reading from /dev/hwrng at the
-time of PRNG clock enable
-
-Change-Id: I89856c7e19e6639508e6a2774304583a3ec91172
-Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
----
- drivers/clk/qcom/gcc-ipq806x.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/clk/qcom/gcc-ipq806x.c
-+++ b/drivers/clk/qcom/gcc-ipq806x.c
-@@ -1233,6 +1233,8 @@ static struct clk_rcg prng_src = {
- .parent_map = gcc_pxo_pll8_map,
- },
- .clkr = {
-+ .enable_reg = 0x2e80,
-+ .enable_mask = BIT(11),
- .hw.init = &(struct clk_init_data){
- .name = "prng_src",
- .parent_names = gcc_pxo_pll8,
diff --git a/target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch b/target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch
deleted file mode 100644
index 685b0c3ce1..0000000000
--- a/target/linux/ipq806x/patches-4.14/0063-1-ipq806x-tsens-driver.patch
+++ /dev/null
@@ -1,627 +0,0 @@
-From 3302e1e1a3cfa4e67fda2a61d6f0c42205d40932 Mon Sep 17 00:00:00 2001
-From: Rajith Cherian <rajith@codeaurora.org>
-Date: Tue, 14 Feb 2017 18:30:43 +0530
-Subject: [PATCH] ipq8064: tsens: Base tsens driver for IPQ8064
-
-Add TSENS driver template to support IPQ8064.
-This is a base file copied from tsens-8960.c
-
-Change-Id: I47c573fdfa2d898243c6a6ba952d1632f91391f7
-Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
-
-ipq8064: tsens: TSENS driver support for IPQ8064
-
-Support for IPQ8064 tsens driver. The driver works
-with the thermal framework. The driver overrides the
-following fucntionalities:
-
-1. Get current temperature.
-2. Get/Set trip temperatures.
-3. Enabled/Disable trip points.
-4. ISR for threshold generated interrupt.
-5. Notify userspace when trip points are hit.
-
-Change-Id: I8bc7204fd627d10875ab13fc1de8cb6c2ed7a918
-Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
----
- .../devicetree/bindings/thermal/qcom-tsens.txt | 1 +
- drivers/thermal/qcom/Makefile | 3 +-
- drivers/thermal/qcom/tsens-ipq8064.c | 551 +++++++++++++++++++++
- drivers/thermal/qcom/tsens.c | 3 +
- drivers/thermal/qcom/tsens.h | 2 +-
- 5 files changed, 558 insertions(+), 2 deletions(-)
- create mode 100644 drivers/thermal/qcom/tsens-ipq8064.c
-
---- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
-+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
-@@ -5,6 +5,7 @@ Required properties:
- - "qcom,msm8916-tsens" : For 8916 Family of SoCs
- - "qcom,msm8974-tsens" : For 8974 Family of SoCs
- - "qcom,msm8996-tsens" : For 8996 Family of SoCs
-+ - "qcom,ipq8064-tsens" : For IPQ8064
-
- - reg: Address range of the thermal registers
- - #thermal-sensor-cells : Should be 1. See ./thermal.txt for a description.
---- a/drivers/thermal/qcom/Makefile
-+++ b/drivers/thermal/qcom/Makefile
-@@ -1,2 +1,3 @@
- obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o
--qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o
-+qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-8996.o \
-+ tsens-ipq8064.o
---- /dev/null
-+++ b/drivers/thermal/qcom/tsens-ipq8064.c
-@@ -0,0 +1,551 @@
-+/*
-+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/bitops.h>
-+#include <linux/regmap.h>
-+#include <linux/thermal.h>
-+#include <linux/nvmem-consumer.h>
-+#include <linux/io.h>
-+#include <linux/interrupt.h>
-+#include "tsens.h"
-+
-+#define CAL_MDEGC 30000
-+
-+#define CONFIG_ADDR 0x3640
-+/* CONFIG_ADDR bitmasks */
-+#define CONFIG 0x9b
-+#define CONFIG_MASK 0xf
-+#define CONFIG_SHIFT 0
-+
-+#define STATUS_CNTL_8064 0x3660
-+#define CNTL_ADDR 0x3620
-+/* CNTL_ADDR bitmasks */
-+#define EN BIT(0)
-+#define SW_RST BIT(1)
-+#define SENSOR0_EN BIT(3)
-+#define SLP_CLK_ENA BIT(26)
-+#define MEASURE_PERIOD 1
-+#define SENSOR0_SHIFT 3
-+
-+/* INT_STATUS_ADDR bitmasks */
-+#define MIN_STATUS_MASK BIT(0)
-+#define LOWER_STATUS_CLR BIT(1)
-+#define UPPER_STATUS_CLR BIT(2)
-+#define MAX_STATUS_MASK BIT(3)
-+
-+#define THRESHOLD_ADDR 0x3624
-+/* THRESHOLD_ADDR bitmasks */
-+#define THRESHOLD_MAX_CODE 0x20000
-+#define THRESHOLD_MIN_CODE 0
-+#define THRESHOLD_MAX_LIMIT_SHIFT 24
-+#define THRESHOLD_MIN_LIMIT_SHIFT 16
-+#define THRESHOLD_UPPER_LIMIT_SHIFT 8
-+#define THRESHOLD_LOWER_LIMIT_SHIFT 0
-+#define THRESHOLD_MAX_LIMIT_MASK (THRESHOLD_MAX_CODE << \
-+ THRESHOLD_MAX_LIMIT_SHIFT)
-+#define THRESHOLD_MIN_LIMIT_MASK (THRESHOLD_MAX_CODE << \
-+ THRESHOLD_MIN_LIMIT_SHIFT)
-+#define THRESHOLD_UPPER_LIMIT_MASK (THRESHOLD_MAX_CODE << \
-+ THRESHOLD_UPPER_LIMIT_SHIFT)
-+#define THRESHOLD_LOWER_LIMIT_MASK (THRESHOLD_MAX_CODE << \
-+ THRESHOLD_LOWER_LIMIT_SHIFT)
-+
-+/* Initial temperature threshold values */
-+#define LOWER_LIMIT_TH 0x9d /* 95C */
-+#define UPPER_LIMIT_TH 0xa6 /* 105C */
-+#define MIN_LIMIT_TH 0x0
-+#define MAX_LIMIT_TH 0xff
-+
-+#define S0_STATUS_ADDR 0x3628
-+#define STATUS_ADDR_OFFSET 2
-+#define SENSOR_STATUS_SIZE 4
-+#define INT_STATUS_ADDR 0x363c
-+#define TRDY_MASK BIT(7)
-+#define TIMEOUT_US 100
-+
-+#define TSENS_EN BIT(0)
-+#define TSENS_SW_RST BIT(1)
-+#define TSENS_ADC_CLK_SEL BIT(2)
-+#define SENSOR0_EN BIT(3)
-+#define SENSOR1_EN BIT(4)
-+#define SENSOR2_EN BIT(5)
-+#define SENSOR3_EN BIT(6)
-+#define SENSOR4_EN BIT(7)
-+#define SENSORS_EN (SENSOR0_EN | SENSOR1_EN | \
-+ SENSOR2_EN | SENSOR3_EN | SENSOR4_EN)
-+#define TSENS_8064_SENSOR5_EN BIT(8)
-+#define TSENS_8064_SENSOR6_EN BIT(9)
-+#define TSENS_8064_SENSOR7_EN BIT(10)
-+#define TSENS_8064_SENSOR8_EN BIT(11)
-+#define TSENS_8064_SENSOR9_EN BIT(12)
-+#define TSENS_8064_SENSOR10_EN BIT(13)
-+#define TSENS_8064_SENSORS_EN (SENSORS_EN | \
-+ TSENS_8064_SENSOR5_EN | \
-+ TSENS_8064_SENSOR6_EN | \
-+ TSENS_8064_SENSOR7_EN | \
-+ TSENS_8064_SENSOR8_EN | \
-+ TSENS_8064_SENSOR9_EN | \
-+ TSENS_8064_SENSOR10_EN)
-+
-+#define TSENS_8064_SEQ_SENSORS 5
-+#define TSENS_8064_S4_S5_OFFSET 40
-+#define TSENS_FACTOR 1
-+
-+/* Trips: from very hot to very cold */
-+enum tsens_trip_type {
-+ TSENS_TRIP_STAGE3 = 0,
-+ TSENS_TRIP_STAGE2,
-+ TSENS_TRIP_STAGE1,
-+ TSENS_TRIP_STAGE0,
-+ TSENS_TRIP_NUM,
-+};
-+
-+u32 tsens_8064_slope[] = {
-+ 1176, 1176, 1154, 1176,
-+ 1111, 1132, 1132, 1199,
-+ 1132, 1199, 1132
-+ };
-+
-+/* Temperature on y axis and ADC-code on x-axis */
-+static inline int code_to_degC(u32 adc_code, const struct tsens_sensor *s)
-+{
-+ int degcbeforefactor, degc;
-+
-+ degcbeforefactor = (adc_code * s->slope) + s->offset;
-+
-+ if (degcbeforefactor == 0)
-+ degc = degcbeforefactor;
-+ else if (degcbeforefactor > 0)
-+ degc = (degcbeforefactor + TSENS_FACTOR/2)
-+ / TSENS_FACTOR;
-+ else
-+ degc = (degcbeforefactor - TSENS_FACTOR/2)
-+ / TSENS_FACTOR;
-+
-+ return degc;
-+}
-+
-+static int degC_to_code(int degC, const struct tsens_sensor *s)
-+{
-+ int code = ((degC * TSENS_FACTOR - s->offset) + (s->slope/2))
-+ / s->slope;
-+
-+ if (code > THRESHOLD_MAX_CODE)
-+ code = THRESHOLD_MAX_CODE;
-+ else if (code < THRESHOLD_MIN_CODE)
-+ code = THRESHOLD_MIN_CODE;
-+ return code;
-+}
-+
-+static int suspend_ipq8064(struct tsens_device *tmdev)
-+{
-+ int ret;
-+ unsigned int mask;
-+ struct regmap *map = tmdev->map;
-+
-+ ret = regmap_read(map, THRESHOLD_ADDR, &tmdev->ctx.threshold);
-+ if (ret)
-+ return ret;
-+
-+ ret = regmap_read(map, CNTL_ADDR, &tmdev->ctx.control);
-+ if (ret)
-+ return ret;
-+
-+ mask = SLP_CLK_ENA | EN;
-+
-+ ret = regmap_update_bits(map, CNTL_ADDR, mask, 0);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int resume_ipq8064(struct tsens_device *tmdev)
-+{
-+ int ret;
-+ struct regmap *map = tmdev->map;
-+
-+ ret = regmap_update_bits(map, CNTL_ADDR, SW_RST, SW_RST);
-+ if (ret)
-+ return ret;
-+
-+ ret = regmap_update_bits(map, CONFIG_ADDR, CONFIG_MASK, CONFIG);
-+ if (ret)
-+ return ret;
-+
-+ ret = regmap_write(map, THRESHOLD_ADDR, tmdev->ctx.threshold);
-+ if (ret)
-+ return ret;
-+
-+ ret = regmap_write(map, CNTL_ADDR, tmdev->ctx.control);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static void notify_uspace_tsens_fn(struct work_struct *work)
-+{
-+ struct tsens_sensor *s = container_of(work, struct tsens_sensor,
-+ notify_work);
-+
-+ sysfs_notify(&s->tzd->device.kobj, NULL, "type");
-+}
-+
-+static void tsens_scheduler_fn(struct work_struct *work)
-+{
-+ struct tsens_device *tmdev = container_of(work, struct tsens_device,
-+ tsens_work);
-+ unsigned int threshold, threshold_low, code, reg, sensor, mask;
-+ unsigned int sensor_addr;
-+ bool upper_th_x, lower_th_x;
-+ int adc_code, ret;
-+
-+ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, &reg);
-+ if (ret)
-+ return;
-+ reg = reg | LOWER_STATUS_CLR | UPPER_STATUS_CLR;
-+ ret = regmap_write(tmdev->map, STATUS_CNTL_8064, reg);
-+ if (ret)
-+ return;
-+
-+ mask = ~(LOWER_STATUS_CLR | UPPER_STATUS_CLR);
-+ ret = regmap_read(tmdev->map, THRESHOLD_ADDR, &threshold);
-+ if (ret)
-+ return;
-+ threshold_low = (threshold & THRESHOLD_LOWER_LIMIT_MASK)
-+ >> THRESHOLD_LOWER_LIMIT_SHIFT;
-+ threshold = (threshold & THRESHOLD_UPPER_LIMIT_MASK)
-+ >> THRESHOLD_UPPER_LIMIT_SHIFT;
-+
-+ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, &reg);
-+ if (ret)
-+ return;
-+
-+ ret = regmap_read(tmdev->map, CNTL_ADDR, &sensor);
-+ if (ret)
-+ return;
-+ sensor &= (uint32_t) TSENS_8064_SENSORS_EN;
-+ sensor >>= SENSOR0_SHIFT;
-+
-+ /* Constraint: There is only 1 interrupt control register for all
-+ * 11 temperature sensor. So monitoring more than 1 sensor based
-+ * on interrupts will yield inconsistent result. To overcome this
-+ * issue we will monitor only sensor 0 which is the master sensor.
-+ */
-+
-+ /* Skip if the sensor is disabled */
-+ if (sensor & 1) {
-+ ret = regmap_read(tmdev->map, tmdev->sensor[0].status, &code);
-+ if (ret)
-+ return;
-+ upper_th_x = code >= threshold;
-+ lower_th_x = code <= threshold_low;
-+ if (upper_th_x)
-+ mask |= UPPER_STATUS_CLR;
-+ if (lower_th_x)
-+ mask |= LOWER_STATUS_CLR;
-+ if (upper_th_x || lower_th_x) {
-+ /* Notify user space */
-+ schedule_work(&tmdev->sensor[0].notify_work);
-+ regmap_read(tmdev->map, sensor_addr, &adc_code);
-+ pr_debug("Trigger (%d degrees) for sensor %d\n",
-+ code_to_degC(adc_code, &tmdev->sensor[0]), 0);
-+ }
-+ }
-+ regmap_write(tmdev->map, STATUS_CNTL_8064, reg & mask);
-+
-+ /* force memory to sync */
-+ mb();
-+}
-+
-+static irqreturn_t tsens_isr(int irq, void *data)
-+{
-+ struct tsens_device *tmdev = data;
-+
-+ schedule_work(&tmdev->tsens_work);
-+ return IRQ_HANDLED;
-+}
-+
-+static void hw_init(struct tsens_device *tmdev)
-+{
-+ int ret;
-+ unsigned int reg_cntl = 0, reg_cfg = 0, reg_thr = 0;
-+ unsigned int reg_status_cntl = 0;
-+
-+ regmap_read(tmdev->map, CNTL_ADDR, &reg_cntl);
-+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl | TSENS_SW_RST);
-+
-+ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18)
-+ | (((1 << tmdev->num_sensors) - 1) << SENSOR0_SHIFT);
-+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
-+ regmap_read(tmdev->map, STATUS_CNTL_8064, &reg_status_cntl);
-+ reg_status_cntl |= LOWER_STATUS_CLR | UPPER_STATUS_CLR
-+ | MIN_STATUS_MASK | MAX_STATUS_MASK;
-+ regmap_write(tmdev->map, STATUS_CNTL_8064, reg_status_cntl);
-+ reg_cntl |= TSENS_EN;
-+ regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
-+
-+ regmap_read(tmdev->map, CONFIG_ADDR, &reg_cfg);
-+ reg_cfg = (reg_cfg & ~CONFIG_MASK) | (CONFIG << CONFIG_SHIFT);
-+ regmap_write(tmdev->map, CONFIG_ADDR, reg_cfg);
-+
-+ reg_thr |= (LOWER_LIMIT_TH << THRESHOLD_LOWER_LIMIT_SHIFT)
-+ | (UPPER_LIMIT_TH << THRESHOLD_UPPER_LIMIT_SHIFT)
-+ | (MIN_LIMIT_TH << THRESHOLD_MIN_LIMIT_SHIFT)
-+ | (MAX_LIMIT_TH << THRESHOLD_MAX_LIMIT_SHIFT);
-+
-+ regmap_write(tmdev->map, THRESHOLD_ADDR, reg_thr);
-+
-+ ret = devm_request_irq(tmdev->dev, tmdev->tsens_irq, tsens_isr,
-+ IRQF_TRIGGER_RISING, "tsens_interrupt", tmdev);
-+ if (ret < 0) {
-+ pr_err("%s: request_irq FAIL: %d\n", __func__, ret);
-+ return;
-+ }
-+
-+ INIT_WORK(&tmdev->tsens_work, tsens_scheduler_fn);
-+}
-+
-+static int init_ipq8064(struct tsens_device *tmdev)
-+{
-+ int ret, i;
-+ u32 reg_cntl, offset = 0;
-+
-+ init_common(tmdev);
-+ if (!tmdev->map)
-+ return -ENODEV;
-+
-+ /*
-+ * The status registers for each sensor are discontiguous
-+ * because some SoCs have 5 sensors while others have more
-+ * but the control registers stay in the same place, i.e
-+ * directly after the first 5 status registers.
-+ */
-+ for (i = 0; i < tmdev->num_sensors; i++) {
-+ if (i >= TSENS_8064_SEQ_SENSORS)
-+ offset = TSENS_8064_S4_S5_OFFSET;
-+
-+ tmdev->sensor[i].status = S0_STATUS_ADDR + offset
-+ + (i << STATUS_ADDR_OFFSET);
-+ tmdev->sensor[i].slope = tsens_8064_slope[i];
-+ INIT_WORK(&tmdev->sensor[i].notify_work,
-+ notify_uspace_tsens_fn);
-+ }
-+
-+ reg_cntl = SW_RST;
-+ ret = regmap_update_bits(tmdev->map, CNTL_ADDR, SW_RST, reg_cntl);
-+ if (ret)
-+ return ret;
-+
-+ reg_cntl |= SLP_CLK_ENA | (MEASURE_PERIOD << 18);
-+ reg_cntl &= ~SW_RST;
-+ ret = regmap_update_bits(tmdev->map, CONFIG_ADDR,
-+ CONFIG_MASK, CONFIG);
-+
-+ reg_cntl |= GENMASK(tmdev->num_sensors - 1, 0) << SENSOR0_SHIFT;
-+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
-+ if (ret)
-+ return ret;
-+
-+ reg_cntl |= EN;
-+ ret = regmap_write(tmdev->map, CNTL_ADDR, reg_cntl);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int calibrate_ipq8064(struct tsens_device *tmdev)
-+{
-+ int i;
-+ char *data, *data_backup;
-+
-+ ssize_t num_read = tmdev->num_sensors;
-+ struct tsens_sensor *s = tmdev->sensor;
-+
-+ data = qfprom_read(tmdev->dev, "calib");
-+ if (IS_ERR(data)) {
-+ pr_err("Calibration not found.\n");
-+ return PTR_ERR(data);
-+ }
-+
-+ data_backup = qfprom_read(tmdev->dev, "calib_backup");
-+ if (IS_ERR(data_backup)) {
-+ pr_err("Backup calibration not found.\n");
-+ return PTR_ERR(data_backup);
-+ }
-+
-+ for (i = 0; i < num_read; i++) {
-+ s[i].calib_data = readb_relaxed(data + i);
-+ s[i].calib_data_backup = readb_relaxed(data_backup + i);
-+
-+ if (s[i].calib_data_backup)
-+ s[i].calib_data = s[i].calib_data_backup;
-+ if (!s[i].calib_data) {
-+ pr_err("QFPROM TSENS calibration data not present\n");
-+ return -ENODEV;
-+ }
-+ s[i].slope = tsens_8064_slope[i];
-+ s[i].offset = CAL_MDEGC - (s[i].calib_data * s[i].slope);
-+ }
-+
-+ hw_init(tmdev);
-+
-+ return 0;
-+}
-+
-+static int get_temp_ipq8064(struct tsens_device *tmdev, int id, int *temp)
-+{
-+ int ret;
-+ u32 code, trdy;
-+ const struct tsens_sensor *s = &tmdev->sensor[id];
-+ unsigned long timeout;
-+
-+ timeout = jiffies + usecs_to_jiffies(TIMEOUT_US);
-+ do {
-+ ret = regmap_read(tmdev->map, INT_STATUS_ADDR, &trdy);
-+ if (ret)
-+ return ret;
-+ if (!(trdy & TRDY_MASK))
-+ continue;
-+ ret = regmap_read(tmdev->map, s->status, &code);
-+ if (ret)
-+ return ret;
-+ *temp = code_to_degC(code, s);
-+ return 0;
-+ } while (time_before(jiffies, timeout));
-+
-+ return -ETIMEDOUT;
-+}
-+
-+static int set_trip_temp_ipq8064(void *data, int trip, int temp)
-+{
-+ unsigned int reg_th, reg_cntl;
-+ int ret, code, code_chk, hi_code, lo_code;
-+ const struct tsens_sensor *s = data;
-+ struct tsens_device *tmdev = s->tmdev;
-+
-+ code_chk = code = degC_to_code(temp, s);
-+
-+ if (code < THRESHOLD_MIN_CODE || code > THRESHOLD_MAX_CODE)
-+ return -EINVAL;
-+
-+ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, &reg_cntl);
-+ if (ret)
-+ return ret;
-+
-+ ret = regmap_read(tmdev->map, THRESHOLD_ADDR, &reg_th);
-+ if (ret)
-+ return ret;
-+
-+ hi_code = (reg_th & THRESHOLD_UPPER_LIMIT_MASK)
-+ >> THRESHOLD_UPPER_LIMIT_SHIFT;
-+ lo_code = (reg_th & THRESHOLD_LOWER_LIMIT_MASK)
-+ >> THRESHOLD_LOWER_LIMIT_SHIFT;
-+
-+ switch (trip) {
-+ case TSENS_TRIP_STAGE3:
-+ code <<= THRESHOLD_MAX_LIMIT_SHIFT;
-+ reg_th &= ~THRESHOLD_MAX_LIMIT_MASK;
-+ break;
-+ case TSENS_TRIP_STAGE2:
-+ if (code_chk <= lo_code)
-+ return -EINVAL;
-+ code <<= THRESHOLD_UPPER_LIMIT_SHIFT;
-+ reg_th &= ~THRESHOLD_UPPER_LIMIT_MASK;
-+ break;
-+ case TSENS_TRIP_STAGE1:
-+ if (code_chk >= hi_code)
-+ return -EINVAL;
-+ code <<= THRESHOLD_LOWER_LIMIT_SHIFT;
-+ reg_th &= ~THRESHOLD_LOWER_LIMIT_MASK;
-+ break;
-+ case TSENS_TRIP_STAGE0:
-+ code <<= THRESHOLD_MIN_LIMIT_SHIFT;
-+ reg_th &= ~THRESHOLD_MIN_LIMIT_MASK;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ ret = regmap_write(tmdev->map, THRESHOLD_ADDR, reg_th | code);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static int set_trip_activate_ipq8064(void *data, int trip,
-+ enum thermal_trip_activation_mode mode)
-+{
-+ unsigned int reg_cntl, mask, val;
-+ const struct tsens_sensor *s = data;
-+ struct tsens_device *tmdev = s->tmdev;
-+ int ret;
-+
-+ if (!tmdev || trip < 0)
-+ return -EINVAL;
-+
-+ ret = regmap_read(tmdev->map, STATUS_CNTL_8064, &reg_cntl);
-+ if (ret)
-+ return ret;
-+
-+ switch (trip) {
-+ case TSENS_TRIP_STAGE3:
-+ mask = MAX_STATUS_MASK;
-+ break;
-+ case TSENS_TRIP_STAGE2:
-+ mask = UPPER_STATUS_CLR;
-+ break;
-+ case TSENS_TRIP_STAGE1:
-+ mask = LOWER_STATUS_CLR;
-+ break;
-+ case TSENS_TRIP_STAGE0:
-+ mask = MIN_STATUS_MASK;
-+ break;
-+ default:
-+ return -EINVAL;
-+ }
-+
-+ if (mode == THERMAL_TRIP_ACTIVATION_DISABLED)
-+ val = reg_cntl | mask;
-+ else
-+ val = reg_cntl & ~mask;
-+
-+ ret = regmap_write(tmdev->map, STATUS_CNTL_8064, val);
-+ if (ret)
-+ return ret;
-+
-+ /* force memory to sync */
-+ mb();
-+ return 0;
-+}
-+
-+const struct tsens_ops ops_ipq8064 = {
-+ .init = init_ipq8064,
-+ .calibrate = calibrate_ipq8064,
-+ .get_temp = get_temp_ipq8064,
-+ .suspend = suspend_ipq8064,
-+ .resume = resume_ipq8064,
-+ .set_trip_temp = set_trip_temp_ipq8064,
-+ .set_trip_activate = set_trip_activate_ipq8064,
-+};
-+
-+const struct tsens_data data_ipq8064 = {
-+ .num_sensors = 11,
-+ .ops = &ops_ipq8064,
-+};
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -72,6 +72,9 @@ static const struct of_device_id tsens_t
- }, {
- .compatible = "qcom,msm8996-tsens",
- .data = &data_8996,
-+ }, {
-+ .compatible = "qcom,ipq8064-tsens",
-+ .data = &data_ipq8064,
- },
- {}
- };
---- a/drivers/thermal/qcom/tsens.h
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -89,6 +89,6 @@ void compute_intercept_slope(struct tsen
- int init_common(struct tsens_device *);
- int get_temp_common(struct tsens_device *, int, int *);
-
--extern const struct tsens_data data_8916, data_8974, data_8960, data_8996;
-+extern const struct tsens_data data_8916, data_8974, data_8960, data_8996, data_ipq8064;
-
- #endif /* __QCOM_TSENS_H__ */
diff --git a/target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch b/target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch
deleted file mode 100644
index 944d1e575b..0000000000
--- a/target/linux/ipq806x/patches-4.14/0063-2-tsens-support-configurable-interrupts.patch
+++ /dev/null
@@ -1,453 +0,0 @@
-From 4e87400732c77765afae2ea89ed43837457aa604 Mon Sep 17 00:00:00 2001
-From: Rajith Cherian <rajith@codeaurora.org>
-Date: Wed, 1 Feb 2017 19:00:26 +0530
-Subject: [PATCH] ipq8064: tsens: Support for configurable interrupts
-
-Provide support for adding configurable high and
-configurable low trip temperatures. An interrupts is
-also triggerred when these trip points are hit. The
-interrupts can be activated or deactivated from sysfs.
-This functionality is made available only if
-CONFIG_THERMAL_WRITABLE_TRIPS is defined.
-
-Change-Id: Ib73f3f9459de4fffce7bb985a0312a88291f4934
-Signed-off-by: Rajith Cherian <rajith@codeaurora.org>
----
- .../devicetree/bindings/thermal/qcom-tsens.txt | 4 ++
- drivers/thermal/of-thermal.c | 63 ++++++++++++++++++----
- drivers/thermal/qcom/tsens.c | 43 ++++++++++++---
- drivers/thermal/qcom/tsens.h | 11 ++++
- drivers/thermal/thermal_core.c | 44 ++++++++++++++-
- include/linux/thermal.h | 14 +++++
- 6 files changed, 162 insertions(+), 17 deletions(-)
-
---- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
-+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt
-@@ -12,11 +12,15 @@ Required properties:
- - Refer to Documentation/devicetree/bindings/nvmem/nvmem.txt to know how to specify
- nvmem cells
-
-+Optional properties:
-+- interrupts: Interrupt which gets triggered when threshold is hit
-+
- Example:
- tsens: thermal-sensor@900000 {
- compatible = "qcom,msm8916-tsens";
- reg = <0x4a8000 0x2000>;
- nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
- nvmem-cell-names = "caldata", "calsel";
-+ interrupts = <0 178 0>;
- #thermal-sensor-cells = <1>;
- };
---- a/drivers/thermal/of-thermal.c
-+++ b/drivers/thermal/of-thermal.c
-@@ -95,7 +95,7 @@ static int of_thermal_get_temp(struct th
- {
- struct __thermal_zone *data = tz->devdata;
-
-- if (!data->ops->get_temp)
-+ if (!data->ops->get_temp || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EINVAL;
-
- return data->ops->get_temp(data->sensor_data, temp);
-@@ -106,7 +106,8 @@ static int of_thermal_set_trips(struct t
- {
- struct __thermal_zone *data = tz->devdata;
-
-- if (!data->ops || !data->ops->set_trips)
-+ if (!data->ops || !data->ops->set_trips
-+ || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EINVAL;
-
- return data->ops->set_trips(data->sensor_data, low, high);
-@@ -192,6 +193,9 @@ static int of_thermal_set_emul_temp(stru
- {
- struct __thermal_zone *data = tz->devdata;
-
-+ if (data->mode == THERMAL_DEVICE_DISABLED)
-+ return -EINVAL;
-+
- return data->ops->set_emul_temp(data->sensor_data, temp);
- }
-
-@@ -200,7 +204,7 @@ static int of_thermal_get_trend(struct t
- {
- struct __thermal_zone *data = tz->devdata;
-
-- if (!data->ops->get_trend)
-+ if (!data->ops->get_trend || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EINVAL;
-
- return data->ops->get_trend(data->sensor_data, trip, trend);
-@@ -289,7 +293,9 @@ static int of_thermal_set_mode(struct th
- mutex_unlock(&tz->lock);
-
- data->mode = mode;
-- thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-+
-+ if (mode == THERMAL_DEVICE_ENABLED)
-+ thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
-
- return 0;
- }
-@@ -299,7 +305,8 @@ static int of_thermal_get_trip_type(stru
- {
- struct __thermal_zone *data = tz->devdata;
-
-- if (trip >= data->ntrips || trip < 0)
-+ if (trip >= data->ntrips || trip < 0
-+ || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EDOM;
-
- *type = data->trips[trip].type;
-@@ -307,12 +314,39 @@ static int of_thermal_get_trip_type(stru
- return 0;
- }
-
-+static int of_thermal_activate_trip_type(struct thermal_zone_device *tz,
-+ int trip, enum thermal_trip_activation_mode mode)
-+{
-+ struct __thermal_zone *data = tz->devdata;
-+
-+ if (trip >= data->ntrips || trip < 0
-+ || (data->mode == THERMAL_DEVICE_DISABLED))
-+ return -EDOM;
-+
-+ /*
-+ * The configurable_hi and configurable_lo trip points can be
-+ * activated and deactivated.
-+ */
-+
-+ if (data->ops->set_trip_activate) {
-+ int ret;
-+
-+ ret = data->ops->set_trip_activate(data->sensor_data,
-+ trip, mode);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
- static int of_thermal_get_trip_temp(struct thermal_zone_device *tz, int trip,
- int *temp)
- {
- struct __thermal_zone *data = tz->devdata;
-
-- if (trip >= data->ntrips || trip < 0)
-+ if (trip >= data->ntrips || trip < 0
-+ || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EDOM;
-
- *temp = data->trips[trip].temperature;
-@@ -325,7 +359,8 @@ static int of_thermal_set_trip_temp(stru
- {
- struct __thermal_zone *data = tz->devdata;
-
-- if (trip >= data->ntrips || trip < 0)
-+ if (trip >= data->ntrips || trip < 0
-+ || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EDOM;
-
- if (data->ops->set_trip_temp) {
-@@ -347,7 +382,8 @@ static int of_thermal_get_trip_hyst(stru
- {
- struct __thermal_zone *data = tz->devdata;
-
-- if (trip >= data->ntrips || trip < 0)
-+ if (trip >= data->ntrips || trip < 0
-+ || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EDOM;
-
- *hyst = data->trips[trip].hysteresis;
-@@ -360,7 +396,8 @@ static int of_thermal_set_trip_hyst(stru
- {
- struct __thermal_zone *data = tz->devdata;
-
-- if (trip >= data->ntrips || trip < 0)
-+ if (trip >= data->ntrips || trip < 0
-+ || (data->mode == THERMAL_DEVICE_DISABLED))
- return -EDOM;
-
- /* thermal framework should take care of data->mask & (1 << trip) */
-@@ -435,6 +472,9 @@ thermal_zone_of_add_sensor(struct device
- if (ops->set_emul_temp)
- tzd->ops->set_emul_temp = of_thermal_set_emul_temp;
-
-+ if (ops->set_trip_activate)
-+ tzd->ops->set_trip_activate = of_thermal_activate_trip_type;
-+
- mutex_unlock(&tzd->lock);
-
- return tzd;
-@@ -729,7 +769,10 @@ static const char * const trip_types[] =
- [THERMAL_TRIP_ACTIVE] = "active",
- [THERMAL_TRIP_PASSIVE] = "passive",
- [THERMAL_TRIP_HOT] = "hot",
-- [THERMAL_TRIP_CRITICAL] = "critical",
-+ [THERMAL_TRIP_CRITICAL] = "critical_high",
-+ [THERMAL_TRIP_CONFIGURABLE_HI] = "configurable_hi",
-+ [THERMAL_TRIP_CONFIGURABLE_LOW] = "configurable_lo",
-+ [THERMAL_TRIP_CRITICAL_LOW] = "critical_low",
- };
-
- /**
---- a/drivers/thermal/qcom/tsens.c
-+++ b/drivers/thermal/qcom/tsens.c
-@@ -31,7 +31,7 @@ static int tsens_get_temp(void *data, in
-
- static int tsens_get_trend(void *p, int trip, enum thermal_trend *trend)
- {
-- const struct tsens_sensor *s = p;
-+ struct tsens_sensor *s = p;
- struct tsens_device *tmdev = s->tmdev;
-
- if (tmdev->ops->get_trend)
-@@ -40,9 +40,10 @@ static int tsens_get_trend(void *p, int
- return -ENOTSUPP;
- }
-
--static int __maybe_unused tsens_suspend(struct device *dev)
-+static int __maybe_unused tsens_suspend(void *data)
- {
-- struct tsens_device *tmdev = dev_get_drvdata(dev);
-+ struct tsens_sensor *s = data;
-+ struct tsens_device *tmdev = s->tmdev;
-
- if (tmdev->ops && tmdev->ops->suspend)
- return tmdev->ops->suspend(tmdev);
-@@ -50,9 +51,10 @@ static int __maybe_unused tsens_suspend
- return 0;
- }
-
--static int __maybe_unused tsens_resume(struct device *dev)
-+static int __maybe_unused tsens_resume(void *data)
- {
-- struct tsens_device *tmdev = dev_get_drvdata(dev);
-+ struct tsens_sensor *s = data;
-+ struct tsens_device *tmdev = s->tmdev;
-
- if (tmdev->ops && tmdev->ops->resume)
- return tmdev->ops->resume(tmdev);
-@@ -60,6 +62,30 @@ static int __maybe_unused tsens_resume(s
- return 0;
- }
-
-+static int __maybe_unused tsens_set_trip_temp(void *data, int trip, int temp)
-+{
-+ struct tsens_sensor *s = data;
-+ struct tsens_device *tmdev = s->tmdev;
-+
-+ if (tmdev->ops && tmdev->ops->set_trip_temp)
-+ return tmdev->ops->set_trip_temp(s, trip, temp);
-+
-+ return 0;
-+}
-+
-+static int __maybe_unused tsens_activate_trip_type(void *data, int trip,
-+ enum thermal_trip_activation_mode mode)
-+{
-+ struct tsens_sensor *s = data;
-+ struct tsens_device *tmdev = s->tmdev;
-+
-+ if (tmdev->ops && tmdev->ops->set_trip_activate)
-+ return tmdev->ops->set_trip_activate(s, trip, mode);
-+
-+ return 0;
-+}
-+
-+
- static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
-
- static const struct of_device_id tsens_table[] = {
-@@ -83,6 +109,8 @@ MODULE_DEVICE_TABLE(of, tsens_table);
- static const struct thermal_zone_of_device_ops tsens_of_ops = {
- .get_temp = tsens_get_temp,
- .get_trend = tsens_get_trend,
-+ .set_trip_temp = tsens_set_trip_temp,
-+ .set_trip_activate = tsens_activate_trip_type,
- };
-
- static int tsens_register(struct tsens_device *tmdev)
-@@ -131,7 +159,7 @@ static int tsens_probe(struct platform_d
- if (id)
- data = id->data;
- else
-- data = &data_8960;
-+ return -EINVAL;
-
- if (data->num_sensors <= 0) {
- dev_err(dev, "invalid number of sensors\n");
-@@ -146,6 +174,9 @@ static int tsens_probe(struct platform_d
- tmdev->dev = dev;
- tmdev->num_sensors = data->num_sensors;
- tmdev->ops = data->ops;
-+
-+ tmdev->tsens_irq = platform_get_irq(pdev, 0);
-+
- for (i = 0; i < tmdev->num_sensors; i++) {
- if (data->hw_ids)
- tmdev->sensor[i].hw_id = data->hw_ids[i];
---- a/drivers/thermal/qcom/tsens.h
-+++ b/drivers/thermal/qcom/tsens.h
-@@ -24,9 +24,12 @@ struct tsens_device;
- struct tsens_sensor {
- struct tsens_device *tmdev;
- struct thermal_zone_device *tzd;
-+ struct work_struct notify_work;
- int offset;
- int id;
- int hw_id;
-+ int calib_data;
-+ int calib_data_backup;
- int slope;
- u32 status;
- };
-@@ -41,6 +44,9 @@ struct tsens_sensor {
- * @suspend: Function to suspend the tsens device
- * @resume: Function to resume the tsens device
- * @get_trend: Function to get the thermal/temp trend
-+ * @set_trip_temp: Function to set trip temp
-+ * @get_trip_temp: Function to get trip temp
-+ * @set_trip_activate: Function to activate trip points
- */
- struct tsens_ops {
- /* mandatory callbacks */
-@@ -53,6 +59,9 @@ struct tsens_ops {
- int (*suspend)(struct tsens_device *);
- int (*resume)(struct tsens_device *);
- int (*get_trend)(struct tsens_device *, int, enum thermal_trend *);
-+ int (*set_trip_temp)(void *, int, int);
-+ int (*set_trip_activate)(void *, int,
-+ enum thermal_trip_activation_mode);
- };
-
- /**
-@@ -76,11 +85,13 @@ struct tsens_context {
- struct tsens_device {
- struct device *dev;
- u32 num_sensors;
-+ u32 tsens_irq;
- struct regmap *map;
- struct regmap_field *status_field;
- struct tsens_context ctx;
- bool trdy;
- const struct tsens_ops *ops;
-+ struct work_struct tsens_work;
- struct tsens_sensor sensor[0];
- };
-
---- a/drivers/thermal/thermal_sysfs.c
-+++ b/drivers/thermal/thermal_sysfs.c
-@@ -115,12 +115,48 @@ trip_point_type_show(struct device *dev,
- return sprintf(buf, "passive\n");
- case THERMAL_TRIP_ACTIVE:
- return sprintf(buf, "active\n");
-+ case THERMAL_TRIP_CONFIGURABLE_HI:
-+ return sprintf(buf, "configurable_hi\n");
-+ case THERMAL_TRIP_CONFIGURABLE_LOW:
-+ return sprintf(buf, "configurable_low\n");
-+ case THERMAL_TRIP_CRITICAL_LOW:
-+ return sprintf(buf, "critical_low\n");
- default:
- return sprintf(buf, "unknown\n");
- }
- }
-
- static ssize_t
-+trip_point_type_activate(struct device *dev, struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ struct thermal_zone_device *tz = to_thermal_zone(dev);
-+ int trip, ret;
-+ char *enabled = "enabled";
-+ char *disabled = "disabled";
-+
-+ if (!tz->ops->set_trip_activate)
-+ return -EPERM;
-+
-+ if (!sscanf(attr->attr.name, "trip_point_%d_type", &trip))
-+ return -EINVAL;
-+
-+ if (!strncmp(buf, enabled, strlen(enabled)))
-+ ret = tz->ops->set_trip_activate(tz, trip,
-+ THERMAL_TRIP_ACTIVATION_ENABLED);
-+ else if (!strncmp(buf, disabled, strlen(disabled)))
-+ ret = tz->ops->set_trip_activate(tz, trip,
-+ THERMAL_TRIP_ACTIVATION_DISABLED);
-+ else
-+ ret = -EINVAL;
-+
-+ if (ret)
-+ return ret;
-+
-+ return count;
-+}
-+
-+static ssize_t
- trip_point_temp_store(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
- {
-@@ -562,6 +598,12 @@ static int create_trip_attrs(struct ther
- tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
- attrs[indx] = &tz->trip_type_attrs[indx].attr.attr;
-
-+ if (IS_ENABLED(CONFIG_THERMAL_WRITABLE_TRIPS)) {
-+ tz->trip_type_attrs[indx].attr.store
-+ = trip_point_type_activate;
-+ tz->trip_type_attrs[indx].attr.attr.mode |= S_IWUSR;
-+ }
-+
- /* create trip temp attribute */
- snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
- "trip_point_%d_temp", indx);
---- a/include/linux/thermal.h
-+++ b/include/linux/thermal.h
-@@ -78,11 +78,19 @@ enum thermal_device_mode {
- THERMAL_DEVICE_ENABLED,
- };
-
-+enum thermal_trip_activation_mode {
-+ THERMAL_TRIP_ACTIVATION_DISABLED = 0,
-+ THERMAL_TRIP_ACTIVATION_ENABLED,
-+};
-+
- enum thermal_trip_type {
- THERMAL_TRIP_ACTIVE = 0,
- THERMAL_TRIP_PASSIVE,
- THERMAL_TRIP_HOT,
- THERMAL_TRIP_CRITICAL,
-+ THERMAL_TRIP_CONFIGURABLE_HI,
-+ THERMAL_TRIP_CONFIGURABLE_LOW,
-+ THERMAL_TRIP_CRITICAL_LOW,
- };
-
- enum thermal_trend {
-@@ -120,6 +128,8 @@ struct thermal_zone_device_ops {
- enum thermal_trip_type *);
- int (*get_trip_temp) (struct thermal_zone_device *, int, int *);
- int (*set_trip_temp) (struct thermal_zone_device *, int, int);
-+ int (*set_trip_activate) (struct thermal_zone_device *, int,
-+ enum thermal_trip_activation_mode);
- int (*get_trip_hyst) (struct thermal_zone_device *, int, int *);
- int (*set_trip_hyst) (struct thermal_zone_device *, int, int);
- int (*get_crit_temp) (struct thermal_zone_device *, int *);
-@@ -363,6 +373,8 @@ struct thermal_genl_event {
- * temperature.
- * @set_trip_temp: a pointer to a function that sets the trip temperature on
- * hardware.
-+ * @activate_trip_type: a pointer to a function to enable/disable trip
-+ * temperature interrupts
- */
- struct thermal_zone_of_device_ops {
- int (*get_temp)(void *, int *);
-@@ -370,6 +382,8 @@ struct thermal_zone_of_device_ops {
- int (*set_trips)(void *, int, int);
- int (*set_emul_temp)(void *, int);
- int (*set_trip_temp)(void *, int, int);
-+ int (*set_trip_activate)(void *, int,
-+ enum thermal_trip_activation_mode);
- };
-
- /**
diff --git a/target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch b/target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch
deleted file mode 100644
index 167278a701..0000000000
--- a/target/linux/ipq806x/patches-4.14/0064-clk-clk-rpm-fixes.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From d30840e2b1cf79d90392e6051b0c0b6006d29d8b Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 9 Mar 2017 09:32:40 +0100
-Subject: [PATCH 64/69] clk: clk-rpm fixes
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- .../devicetree/bindings/clock/qcom,rpmcc.txt | 1 +
- drivers/clk/qcom/clk-rpm.c | 35 ++++++++++++++++++++++
- include/dt-bindings/clock/qcom,rpmcc.h | 4 +++
- 3 files changed, 40 insertions(+)
-
---- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
-+++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt
-@@ -13,6 +13,7 @@ Required properties :
- "qcom,rpmcc-msm8916", "qcom,rpmcc"
- "qcom,rpmcc-msm8974", "qcom,rpmcc"
- "qcom,rpmcc-apq8064", "qcom,rpmcc"
-+ "qcom,rpmcc-ipq806x", "qcom,rpmcc"
-
- - #clock-cells : shall contain 1
-
---- a/drivers/clk/qcom/clk-rpm.c
-+++ b/drivers/clk/qcom/clk-rpm.c
-@@ -359,6 +359,16 @@ DEFINE_CLK_RPM(apq8064, sfab_clk, sfab_a
- DEFINE_CLK_RPM(apq8064, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
- DEFINE_CLK_RPM(apq8064, qdss_clk, qdss_a_clk, QCOM_RPM_QDSS_CLK);
-
-+/* ipq806x */
-+DEFINE_CLK_RPM(ipq806x, afab_clk, afab_a_clk, QCOM_RPM_APPS_FABRIC_CLK);
-+DEFINE_CLK_RPM(ipq806x, cfpb_clk, cfpb_a_clk, QCOM_RPM_CFPB_CLK);
-+DEFINE_CLK_RPM(ipq806x, daytona_clk, daytona_a_clk, QCOM_RPM_DAYTONA_FABRIC_CLK);
-+DEFINE_CLK_RPM(ipq806x, ebi1_clk, ebi1_a_clk, QCOM_RPM_EBI1_CLK);
-+DEFINE_CLK_RPM(ipq806x, sfab_clk, sfab_a_clk, QCOM_RPM_SYS_FABRIC_CLK);
-+DEFINE_CLK_RPM(ipq806x, sfpb_clk, sfpb_a_clk, QCOM_RPM_SFPB_CLK);
-+DEFINE_CLK_RPM(ipq806x, nss_fabric_0_clk, nss_fabric_0_a_clk, QCOM_RPM_NSS_FABRIC_0_CLK);
-+DEFINE_CLK_RPM(ipq806x, nss_fabric_1_clk, nss_fabric_1_a_clk, QCOM_RPM_NSS_FABRIC_1_CLK);
-+
- static struct clk_rpm *apq8064_clks[] = {
- [RPM_APPS_FABRIC_CLK] = &apq8064_afab_clk,
- [RPM_APPS_FABRIC_A_CLK] = &apq8064_afab_a_clk,
-@@ -380,13 +390,38 @@ static struct clk_rpm *apq8064_clks[] =
- [RPM_QDSS_A_CLK] = &apq8064_qdss_a_clk,
- };
-
-+static struct clk_rpm *ipq806x_clks[] = {
-+ [RPM_APPS_FABRIC_CLK] = &ipq806x_afab_clk,
-+ [RPM_APPS_FABRIC_A_CLK] = &ipq806x_afab_a_clk,
-+ [RPM_CFPB_CLK] = &ipq806x_cfpb_clk,
-+ [RPM_CFPB_A_CLK] = &ipq806x_cfpb_a_clk,
-+ [RPM_DAYTONA_FABRIC_CLK] = &ipq806x_daytona_clk,
-+ [RPM_DAYTONA_FABRIC_A_CLK] = &ipq806x_daytona_a_clk,
-+ [RPM_EBI1_CLK] = &ipq806x_ebi1_clk,
-+ [RPM_EBI1_A_CLK] = &ipq806x_ebi1_a_clk,
-+ [RPM_SYS_FABRIC_CLK] = &ipq806x_sfab_clk,
-+ [RPM_SYS_FABRIC_A_CLK] = &ipq806x_sfab_a_clk,
-+ [RPM_SFPB_CLK] = &ipq806x_sfpb_clk,
-+ [RPM_SFPB_A_CLK] = &ipq806x_sfpb_a_clk,
-+ [RPM_NSS_FABRIC_0_CLK] = &ipq806x_nss_fabric_0_clk,
-+ [RPM_NSS_FABRIC_0_A_CLK] = &ipq806x_nss_fabric_0_a_clk,
-+ [RPM_NSS_FABRIC_1_CLK] = &ipq806x_nss_fabric_1_clk,
-+ [RPM_NSS_FABRIC_1_A_CLK] = &ipq806x_nss_fabric_1_a_clk,
-+};
-+
- static const struct rpm_clk_desc rpm_clk_apq8064 = {
- .clks = apq8064_clks,
- .num_clks = ARRAY_SIZE(apq8064_clks),
- };
-
-+static const struct rpm_clk_desc rpm_clk_ipq806x = {
-+ .clks = ipq806x_clks,
-+ .num_clks = ARRAY_SIZE(ipq806x_clks),
-+};
-+
- static const struct of_device_id rpm_clk_match_table[] = {
- { .compatible = "qcom,rpmcc-apq8064", .data = &rpm_clk_apq8064 },
-+ { .compatible = "qcom,rpmcc-ipq806x", .data = &rpm_clk_ipq806x },
- { }
- };
- MODULE_DEVICE_TABLE(of, rpm_clk_match_table);
---- a/include/dt-bindings/clock/qcom,rpmcc.h
-+++ b/include/dt-bindings/clock/qcom,rpmcc.h
-@@ -37,6 +37,10 @@
- #define RPM_SYS_FABRIC_A_CLK 19
- #define RPM_SFPB_CLK 20
- #define RPM_SFPB_A_CLK 21
-+#define RPM_NSS_FABRIC_0_CLK 22
-+#define RPM_NSS_FABRIC_0_A_CLK 23
-+#define RPM_NSS_FABRIC_1_CLK 24
-+#define RPM_NSS_FABRIC_1_A_CLK 25
-
- /* SMD RPM clocks */
- #define RPM_SMD_XO_CLK_SRC 0
diff --git a/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch b/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch
deleted file mode 100644
index 0d2a4274c7..0000000000
--- a/target/linux/ipq806x/patches-4.14/0065-arm-override-compiler-flags.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From 4d8e29642661397a339ac3485f212c6360445421 Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 9 Mar 2017 09:33:32 +0100
-Subject: [PATCH 65/69] arm: override compiler flags
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/arm/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -67,7 +67,7 @@ KBUILD_CFLAGS += $(call cc-option,-fno-i
- # macro, but instead defines a whole series of macros which makes
- # testing for a specific architecture or later rather impossible.
- arch-$(CONFIG_CPU_32v7M) =-D__LINUX_ARM_ARCH__=7 -march=armv7-m -Wa,-march=armv7-m
--arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
-+arch-$(CONFIG_CPU_32v7) =-D__LINUX_ARM_ARCH__=7 -mcpu=cortex-a15
- arch-$(CONFIG_CPU_32v6) =-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
- # Only override the compiler option if ARMv6. The ARMv6K extensions are
- # always available in ARMv7
diff --git a/target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch
deleted file mode 100644
index f0cc3ed509..0000000000
--- a/target/linux/ipq806x/patches-4.14/0067-generic-Mangle-bootloader-s-kernel-arguments.patch
+++ /dev/null
@@ -1,189 +0,0 @@
-From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
-From: Adrian Panella <ianchi74@outlook.com>
-Date: Thu, 9 Mar 2017 09:37:17 +0100
-Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
-
-The command-line arguments provided by the boot loader will be
-appended to a new device tree property: bootloader-args.
-If there is a property "append-rootblock" in DT under /chosen
-and a root= option in bootloaders command line it will be parsed
-and added to DT bootargs with the form: <append-rootblock>XX.
-Only command line ATAG will be processed, the rest of the ATAGs
-sent by bootloader will be ignored.
-This is usefull in dual boot systems, to get the current root partition
-without afecting the rest of the system.
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
----
- arch/arm/Kconfig | 11 +++++
- arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++-
- init/main.c | 16 ++++++++
- 3 files changed, 98 insertions(+), 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1934,6 +1934,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
-
-+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ bool "Append rootblock parsing bootloader's kernel arguments"
-+ help
-+ The command-line arguments provided by the boot loader will be
-+ appended to a new device tree property: bootloader-args.
-+ If there is a property "append-rootblock" in DT under /chosen
-+ and a root= option in bootloaders command line it will be parsed
-+ and added to DT bootargs with the form: <append-rootblock>XX.
-+ Only command line ATAG will be processed, the rest of the ATAGs
-+ sent by bootloader will be ignored.
-+
- endchoice
-
- config CMDLINE
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -4,6 +4,8 @@
-
- #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
- #define do_extend_cmdline 1
-+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#define do_extend_cmdline 1
- #else
- #define do_extend_cmdline 0
- #endif
-@@ -67,6 +69,59 @@ static uint32_t get_cell_size(const void
- return cell_size;
- }
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+
-+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
-+{
-+ char *ptr, *end;
-+ char *root="root=";
-+ int i, l;
-+ const char *rootblock;
-+
-+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
-+ ptr = str - 1;
-+
-+ do {
-+ //first find an 'r' at the begining or after a space
-+ do {
-+ ptr++;
-+ ptr = strchr(ptr, 'r');
-+ if(!ptr) return dest;
-+
-+ } while (ptr != str && *(ptr-1) != ' ');
-+
-+ //then check for the rest
-+ for(i = 1; i <= 4; i++)
-+ if(*(ptr+i) != *(root+i)) break;
-+
-+ } while (i != 5);
-+
-+ end = strchr(ptr, ' ');
-+ end = end ? (end - 1) : (strchr(ptr, 0) - 1);
-+
-+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
-+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
-+ ptr = end + 1;
-+
-+ /* if append-rootblock property is set use it to append to command line */
-+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
-+ if(rootblock != NULL) {
-+ if(*dest != ' ') {
-+ *dest = ' ';
-+ dest++;
-+ len++;
-+ }
-+ if (len + l + i <= COMMAND_LINE_SIZE) {
-+ memcpy(dest, rootblock, l);
-+ dest += l - 1;
-+ memcpy(dest, ptr, i);
-+ dest += i;
-+ }
-+ }
-+ return dest;
-+}
-+#endif
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- char cmdline[COMMAND_LINE_SIZE];
-@@ -86,12 +141,21 @@ static void merge_fdt_bootargs(void *fdt
-
- /* and append the ATAG_CMDLINE */
- if (fdt_cmdline) {
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //save original bootloader args
-+ //and append ubi.mtd with root partition number to current cmdline
-+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
-+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
-+
-+#else
- len = strlen(fdt_cmdline);
- if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- *ptr++ = ' ';
- memcpy(ptr, fdt_cmdline, len);
- ptr += len;
- }
-+#endif
- }
- *ptr = '\0';
-
-@@ -148,7 +212,9 @@ int atags_to_fdt(void *atag_list, void *
- else
- setprop_string(fdt, "/chosen", "bootargs",
- atag->u.cmdline.cmdline);
-- } else if (atag->hdr.tag == ATAG_MEM) {
-+ }
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ else if (atag->hdr.tag == ATAG_MEM) {
- if (memcount >= sizeof(mem_reg_property)/4)
- continue;
- if (!atag->u.mem.size)
-@@ -187,6 +253,10 @@ int atags_to_fdt(void *atag_list, void *
- setprop(fdt, "/memory", "reg", mem_reg_property,
- 4 * memcount * memsize);
- }
-+#else
-+
-+ }
-+#endif
-
- return fdt_pack(fdt);
- }
---- a/init/main.c
-+++ b/init/main.c
-@@ -95,6 +95,10 @@
- #include <asm/sections.h>
- #include <asm/cacheflush.h>
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#include <linux/of.h>
-+#endif
-+
- static int kernel_init(void *);
-
- extern void init_IRQ(void);
-@@ -573,6 +577,18 @@ asmlinkage __visible void __init start_k
- page_alloc_init();
-
- pr_notice("Kernel command line: %s\n", boot_command_line);
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //Show bootloader's original command line for reference
-+ if(of_chosen) {
-+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
-+ if(prop)
-+ pr_notice("Bootloader command line (ignored): %s\n", prop);
-+ else
-+ pr_notice("Bootloader command line not present\n");
-+ }
-+#endif
-+
- /* parameters may set static keys */
- jump_label_init();
- parse_early_param();
diff --git a/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch
deleted file mode 100644
index e11378b42a..0000000000
--- a/target/linux/ipq806x/patches-4.14/0069-arm-boot-add-dts-files.patch
+++ /dev/null
@@ -1,31 +0,0 @@
-From 8f68331e14dff9a101f2d0e1d6bec84a031f27ee Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 9 Mar 2017 11:03:18 +0100
-Subject: [PATCH 69/69] arm: boot: add dts files
-
-Signed-off-by: John Crispin <john@phrozen.org>
----
- arch/arm/boot/dts/Makefile | 8 ++++++++
- 1 file changed, 8 insertions(+)
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -699,6 +699,18 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- qcom-apq8084-mtp.dtb \
- qcom-ipq4019-ap.dk01.1-c1.dtb \
- qcom-ipq8064-ap148.dtb \
-+ qcom-ipq8064-c2600.dtb \
-+ qcom-ipq8064-d7800.dtb \
-+ qcom-ipq8064-db149.dtb \
-+ qcom-ipq8064-ap161.dtb \
-+ qcom-ipq8064-ea8500.dtb \
-+ qcom-ipq8064-r7500.dtb \
-+ qcom-ipq8064-r7500v2.dtb \
-+ qcom-ipq8064-wg2600hp.dtb \
-+ qcom-ipq8064-wpq864.dtb \
-+ qcom-ipq8064-wxr-2533dhp.dtb \
-+ qcom-ipq8065-nbg6817.dtb \
-+ qcom-ipq8065-r7800.dtb \
- qcom-msm8660-surf.dtb \
- qcom-msm8960-cdp.dtb \
- qcom-msm8974-lge-nexus5-hammerhead.dtb \
diff --git a/target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch b/target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch
deleted file mode 100644
index b7e375dfb2..0000000000
--- a/target/linux/ipq806x/patches-4.14/0070-qcom-spm-fix-probe-order.patch
+++ /dev/null
@@ -1,16 +0,0 @@
-Check for SCM availability before attempting to use SPM
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/drivers/soc/qcom/spm.c
-+++ b/drivers/soc/qcom/spm.c
-@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru
- cpumask_t mask;
- bool use_scm_power_down = false;
-
-+ if (!qcom_scm_is_available())
-+ return -EPROBE_DEFER;
-+
- for (i = 0; ; i++) {
- state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
- if (!state_node)
diff --git a/target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch b/target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch
deleted file mode 100644
index b9f6e33be6..0000000000
--- a/target/linux/ipq806x/patches-4.14/0071-1-PCI-qcom-Fixed-IPQ806x-specific-clocks.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 86655aa14304ca88a8ce8847276147dbc1a83238 Mon Sep 17 00:00:00 2001
-From: Sham Muthayyan <smuthayy@codeaurora.org>
-Date: Tue, 19 Jul 2016 18:44:49 +0530
-Subject: PCI: qcom: Fixed IPQ806x specific clocks
-
-Change-Id: I488e1bc707d6a22b37a338f41935e3922009ba5e
-Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
----
- drivers/pci/host/pcie-qcom.c | 38 +++++++++++++++++++++++++++++++++-----
- 1 file changed, 33 insertions(+), 5 deletions(-)
-
---- a/drivers/pci/dwc/pcie-qcom.c
-+++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -91,6 +91,8 @@ struct qcom_pcie_resources_2_1_0 {
- struct clk *iface_clk;
- struct clk *core_clk;
- struct clk *phy_clk;
-+ struct clk *aux_clk;
-+ struct clk *ref_clk;
- struct reset_control *pci_reset;
- struct reset_control *axi_reset;
- struct reset_control *ahb_reset;
-@@ -249,6 +251,14 @@ static int qcom_pcie_get_resources_2_1_0
- if (IS_ERR(res->phy_clk))
- return PTR_ERR(res->phy_clk);
-
-+ res->aux_clk = devm_clk_get(dev, "aux");
-+ if (IS_ERR(res->aux_clk))
-+ return PTR_ERR(res->aux_clk);
-+
-+ res->ref_clk = devm_clk_get(dev, "ref");
-+ if (IS_ERR(res->ref_clk))
-+ return PTR_ERR(res->ref_clk);
-+
- res->pci_reset = devm_reset_control_get_exclusive(dev, "pci");
- if (IS_ERR(res->pci_reset))
- return PTR_ERR(res->pci_reset);
-@@ -281,6 +291,8 @@ static void qcom_pcie_deinit_2_1_0(struc
- clk_disable_unprepare(res->iface_clk);
- clk_disable_unprepare(res->core_clk);
- clk_disable_unprepare(res->phy_clk);
-+ clk_disable_unprepare(res->aux_clk);
-+ clk_disable_unprepare(res->ref_clk);
- regulator_disable(res->vdda);
- regulator_disable(res->vdda_phy);
- regulator_disable(res->vdda_refclk);
-@@ -324,16 +336,28 @@ static int qcom_pcie_init_2_1_0(struct q
- goto err_assert_ahb;
- }
-
-+ ret = clk_prepare_enable(res->core_clk);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable core clock\n");
-+ goto err_clk_core;
-+ }
-+
- ret = clk_prepare_enable(res->phy_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable phy clock\n");
- goto err_clk_phy;
- }
-
-- ret = clk_prepare_enable(res->core_clk);
-+ ret = clk_prepare_enable(res->aux_clk);
- if (ret) {
-- dev_err(dev, "cannot prepare/enable core clock\n");
-- goto err_clk_core;
-+ dev_err(dev, "cannot prepare/enable aux clock\n");
-+ goto err_clk_aux;
-+ }
-+
-+ ret = clk_prepare_enable(res->ref_clk);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable ref clock\n");
-+ goto err_clk_ref;
- }
-
- ret = reset_control_deassert(res->ahb_reset);
-@@ -389,10 +413,14 @@ static int qcom_pcie_init_2_1_0(struct q
- return 0;
-
- err_deassert_ahb:
-- clk_disable_unprepare(res->core_clk);
--err_clk_core:
-+ clk_disable_unprepare(res->ref_clk);
-+err_clk_ref:
-+ clk_disable_unprepare(res->aux_clk);
-+err_clk_aux:
- clk_disable_unprepare(res->phy_clk);
- err_clk_phy:
-+ clk_disable_unprepare(res->core_clk);
-+err_clk_core:
- clk_disable_unprepare(res->iface_clk);
- err_assert_ahb:
- regulator_disable(res->vdda_phy);
diff --git a/target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch b/target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch
deleted file mode 100644
index 8b9e5ff5d1..0000000000
--- a/target/linux/ipq806x/patches-4.14/0071-2-PCI-qcom-Fixed-IPQ806x-PCIE-reset-changes.patch
+++ /dev/null
@@ -1,85 +0,0 @@
-From 490d103232287eb51c92c49a4ef8865fd0a9d59e Mon Sep 17 00:00:00 2001
-From: Sham Muthayyan <smuthayy@codeaurora.org>
-Date: Tue, 19 Jul 2016 18:58:18 +0530
-Subject: PCI: qcom: Fixed IPQ806x PCIE reset changes
-
-Change-Id: Ia6590e960b9754b1e8b7a51f318788cd63e9e321
-Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
----
- drivers/pci/host/pcie-qcom.c | 24 +++++++++++++++++++-----
- 1 file changed, 19 insertions(+), 5 deletions(-)
-
---- a/drivers/pci/dwc/pcie-qcom.c
-+++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -98,6 +98,7 @@ struct qcom_pcie_resources_2_1_0 {
- struct reset_control *ahb_reset;
- struct reset_control *por_reset;
- struct reset_control *phy_reset;
-+ struct reset_control *ext_reset;
- struct regulator *vdda;
- struct regulator *vdda_phy;
- struct regulator *vdda_refclk;
-@@ -275,6 +276,10 @@ static int qcom_pcie_get_resources_2_1_0
- if (IS_ERR(res->por_reset))
- return PTR_ERR(res->por_reset);
-
-+ res->ext_reset = devm_reset_control_get(dev, "ext");
-+ if (IS_ERR(res->ext_reset))
-+ return PTR_ERR(res->ext_reset);
-+
- res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
- return PTR_ERR_OR_ZERO(res->phy_reset);
- }
-@@ -288,6 +293,7 @@ static void qcom_pcie_deinit_2_1_0(struc
- reset_control_assert(res->ahb_reset);
- reset_control_assert(res->por_reset);
- reset_control_assert(res->pci_reset);
-+ reset_control_assert(res->ext_reset);
- clk_disable_unprepare(res->iface_clk);
- clk_disable_unprepare(res->core_clk);
- clk_disable_unprepare(res->phy_clk);
-@@ -306,6 +312,12 @@ static int qcom_pcie_init_2_1_0(struct q
- u32 val;
- int ret;
-
-+ ret = reset_control_assert(res->ahb_reset);
-+ if (ret) {
-+ dev_err(dev, "cannot assert ahb reset\n");
-+ return ret;
-+ }
-+
- ret = regulator_enable(res->vdda);
- if (ret) {
- dev_err(dev, "cannot enable vdda regulator\n");
-@@ -324,16 +336,16 @@ static int qcom_pcie_init_2_1_0(struct q
- goto err_vdda_phy;
- }
-
-- ret = reset_control_assert(res->ahb_reset);
-+ ret = reset_control_deassert(res->ext_reset);
- if (ret) {
-- dev_err(dev, "cannot assert ahb reset\n");
-- goto err_assert_ahb;
-+ dev_err(dev, "cannot assert ext reset\n");
-+ goto err_reset_ext;
- }
-
- ret = clk_prepare_enable(res->iface_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable iface clock\n");
-- goto err_assert_ahb;
-+ goto err_iface;
- }
-
- ret = clk_prepare_enable(res->core_clk);
-@@ -422,7 +434,9 @@ err_clk_phy:
- clk_disable_unprepare(res->core_clk);
- err_clk_core:
- clk_disable_unprepare(res->iface_clk);
--err_assert_ahb:
-+err_iface:
-+ reset_control_assert(res->ext_reset);
-+err_reset_ext:
- regulator_disable(res->vdda_phy);
- err_vdda_phy:
- regulator_disable(res->vdda_refclk);
diff --git a/target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch b/target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch
deleted file mode 100644
index 57ee082c83..0000000000
--- a/target/linux/ipq806x/patches-4.14/0071-3-PCI-qcom-Fixed-IPQ806x-PCIE-init-changes.patch
+++ /dev/null
@@ -1,126 +0,0 @@
-From eddd13215d0f2b549ebc5f0e8796d5b1231f90a0 Mon Sep 17 00:00:00 2001
-From: Sham Muthayyan <smuthayy@codeaurora.org>
-Date: Tue, 19 Jul 2016 19:58:22 +0530
-Subject: PCI: qcom: Fixed IPQ806x PCIE init changes
-
-Change-Id: Ic319b1aec27a47809284759f8fcb6a8815b7cf7e
-Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
----
- drivers/pci/host/pcie-qcom.c | 62 +++++++++++++++++++++++++++++++++++++-------
- 1 file changed, 53 insertions(+), 9 deletions(-)
-
---- a/drivers/pci/dwc/pcie-qcom.c
-+++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -52,7 +52,13 @@
- #define PCIE_CAP_CPL_TIMEOUT_DISABLE 0x10
-
- #define PCIE20_PARF_PHY_CTRL 0x40
-+#define PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK (0x1f << 16)
-+#define PHY_CTRL_PHY_TX0_TERM_OFFSET(x) (x << 16)
-+
- #define PCIE20_PARF_PHY_REFCLK 0x4C
-+#define REF_SSP_EN BIT(16)
-+#define REF_USE_PAD BIT(12)
-+
- #define PCIE20_PARF_DBI_BASE_ADDR 0x168
- #define PCIE20_PARF_SLV_ADDR_SPACE_SIZE 0x16C
- #define PCIE20_PARF_MHI_CLOCK_RESET_CTRL 0x174
-@@ -83,6 +89,18 @@
- #define DBI_RO_WR_EN 1
-
- #define PERST_DELAY_US 1000
-+/* PARF registers */
-+#define PCIE20_PARF_PCS_DEEMPH 0x34
-+#define PCS_DEEMPH_TX_DEEMPH_GEN1(x) (x << 16)
-+#define PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x) (x << 8)
-+#define PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x) (x << 0)
-+
-+#define PCIE20_PARF_PCS_SWING 0x38
-+#define PCS_SWING_TX_SWING_FULL(x) (x << 8)
-+#define PCS_SWING_TX_SWING_LOW(x) (x << 0)
-+
-+#define PCIE20_PARF_CONFIG_BITS 0x50
-+#define PHY_RX0_EQ(x) (x << 24)
-
- #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
- #define SLV_ADDR_SPACE_SZ 0x10000000
-@@ -102,6 +120,7 @@ struct qcom_pcie_resources_2_1_0 {
- struct regulator *vdda;
- struct regulator *vdda_phy;
- struct regulator *vdda_refclk;
-+ uint8_t phy_tx0_term_offset;
- };
-
- struct qcom_pcie_resources_1_0_0 {
-@@ -179,6 +198,16 @@ struct qcom_pcie {
-
- #define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
-
-+static inline void
-+writel_masked(void __iomem *addr, u32 clear_mask, u32 set_mask)
-+{
-+ u32 val = readl(addr);
-+
-+ val &= ~clear_mask;
-+ val |= set_mask;
-+ writel(val, addr);
-+}
-+
- static void qcom_ep_reset_assert(struct qcom_pcie *pcie)
- {
- gpiod_set_value_cansleep(pcie->reset, 1);
-@@ -280,6 +309,10 @@ static int qcom_pcie_get_resources_2_1_0
- if (IS_ERR(res->ext_reset))
- return PTR_ERR(res->ext_reset);
-
-+ if (of_property_read_u8(dev->of_node, "phy-tx0-term-offset",
-+ &res->phy_tx0_term_offset))
-+ res->phy_tx0_term_offset = 0;
-+
- res->phy_reset = devm_reset_control_get_exclusive(dev, "phy");
- return PTR_ERR_OR_ZERO(res->phy_reset);
- }
-@@ -309,7 +342,6 @@ static int qcom_pcie_init_2_1_0(struct q
- struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
- struct dw_pcie *pci = pcie->pci;
- struct device *dev = pci->dev;
-- u32 val;
- int ret;
-
- ret = reset_control_assert(res->ahb_reset);
-@@ -378,15 +410,26 @@ static int qcom_pcie_init_2_1_0(struct q
- goto err_deassert_ahb;
- }
-
-- /* enable PCIe clocks and resets */
-- val = readl(pcie->parf + PCIE20_PARF_PHY_CTRL);
-- val &= ~BIT(0);
-- writel(val, pcie->parf + PCIE20_PARF_PHY_CTRL);
--
-- /* enable external reference clock */
-- val = readl(pcie->parf + PCIE20_PARF_PHY_REFCLK);
-- val |= BIT(16);
-- writel(val, pcie->parf + PCIE20_PARF_PHY_REFCLK);
-+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
-+
-+ /* Set Tx termination offset */
-+ writel_masked(pcie->parf + PCIE20_PARF_PHY_CTRL,
-+ PHY_CTRL_PHY_TX0_TERM_OFFSET_MASK,
-+ PHY_CTRL_PHY_TX0_TERM_OFFSET(res->phy_tx0_term_offset));
-+
-+ /* PARF programming */
-+ writel(PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
-+ PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
-+ PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
-+ pcie->parf + PCIE20_PARF_PCS_DEEMPH);
-+ writel(PCS_SWING_TX_SWING_FULL(0x78) |
-+ PCS_SWING_TX_SWING_LOW(0x78),
-+ pcie->parf + PCIE20_PARF_PCS_SWING);
-+ writel(PHY_RX0_EQ(0x4), pcie->parf + PCIE20_PARF_CONFIG_BITS);
-+
-+ /* Enable reference clock */
-+ writel_masked(pcie->parf + PCIE20_PARF_PHY_REFCLK,
-+ REF_USE_PAD, REF_SSP_EN);
-
- ret = reset_control_deassert(res->phy_reset);
- if (ret) {
diff --git a/target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch b/target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch
deleted file mode 100644
index 92100481c8..0000000000
--- a/target/linux/ipq806x/patches-4.14/0071-5-PCI-qcom-Programming-the-PCIE-iATU-for-IPQ806x.patch
+++ /dev/null
@@ -1,114 +0,0 @@
-From d27c303e828d7e42f339a459d2abfe30c51698e9 Mon Sep 17 00:00:00 2001
-From: Sham Muthayyan <smuthayy@codeaurora.org>
-Date: Tue, 26 Jul 2016 12:28:31 +0530
-Subject: PCI: qcom: Programming the PCIE iATU for IPQ806x
-
-Resolved PCIE EP detection errors caused due to missing iATU programming.
-
-Change-Id: Ie95c0f8cb940abc0192a8a3c4e825ddba54b72fe
-Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
----
- drivers/pci/host/pcie-qcom.c | 77 ++++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 77 insertions(+)
-
---- a/drivers/pci/dwc/pcie-qcom.c
-+++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -83,6 +83,30 @@
- #define PCIE20_CAP_LINK_1 (PCIE20_CAP + 0x14)
- #define PCIE_CAP_LINK1_VAL 0x2FD7F
-
-+#define PCIE20_CAP_LINKCTRLSTATUS (PCIE20_CAP + 0x10)
-+
-+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
-+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
-+
-+#define PCIE20_PLR_IATU_VIEWPORT 0x900
-+#define PCIE20_PLR_IATU_REGION_OUTBOUND (0x0 << 31)
-+#define PCIE20_PLR_IATU_REGION_INDEX(x) (x << 0)
-+
-+#define PCIE20_PLR_IATU_CTRL1 0x904
-+#define PCIE20_PLR_IATU_TYPE_CFG0 (0x4 << 0)
-+#define PCIE20_PLR_IATU_TYPE_MEM (0x0 << 0)
-+
-+#define PCIE20_PLR_IATU_CTRL2 0x908
-+#define PCIE20_PLR_IATU_ENABLE BIT(31)
-+
-+#define PCIE20_PLR_IATU_LBAR 0x90C
-+#define PCIE20_PLR_IATU_UBAR 0x910
-+#define PCIE20_PLR_IATU_LAR 0x914
-+#define PCIE20_PLR_IATU_LTAR 0x918
-+#define PCIE20_PLR_IATU_UTAR 0x91c
-+
-+#define MSM_PCIE_DEV_CFG_ADDR 0x01000000
-+
- #define PCIE20_PARF_Q2A_FLUSH 0x1AC
-
- #define PCIE20_MISC_CONTROL_1_REG 0x8BC
-@@ -251,6 +275,57 @@ static void qcom_pcie_2_1_0_ltssm_enable
- writel(val, pcie->elbi + PCIE20_ELBI_SYS_CTRL);
- }
-
-+static void qcom_pcie_prog_viewport_cfg0(struct qcom_pcie *pcie, u32 busdev)
-+{
-+ struct pcie_port *pp = &pcie->pci->pp;
-+
-+ /*
-+ * program and enable address translation region 0 (device config
-+ * address space); region type config;
-+ * axi config address range to device config address range
-+ */
-+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
-+ PCIE20_PLR_IATU_REGION_INDEX(0),
-+ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT);
-+
-+ writel(PCIE20_PLR_IATU_TYPE_CFG0, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1);
-+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2);
-+ writel(pp->cfg0_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR);
-+ writel((pp->cfg0_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR);
-+ writel((pp->cfg0_base + pp->cfg0_size - 1),
-+ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR);
-+ writel(busdev, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR);
-+ writel(0, pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR);
-+}
-+
-+static void qcom_pcie_prog_viewport_mem2_outbound(struct qcom_pcie *pcie)
-+{
-+ struct pcie_port *pp = &pcie->pci->pp;
-+
-+ /*
-+ * program and enable address translation region 2 (device resource
-+ * address space); region type memory;
-+ * axi device bar address range to device bar address range
-+ */
-+ writel(PCIE20_PLR_IATU_REGION_OUTBOUND |
-+ PCIE20_PLR_IATU_REGION_INDEX(2),
-+ pcie->pci->dbi_base + PCIE20_PLR_IATU_VIEWPORT);
-+
-+ writel(PCIE20_PLR_IATU_TYPE_MEM, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL1);
-+ writel(PCIE20_PLR_IATU_ENABLE, pcie->pci->dbi_base + PCIE20_PLR_IATU_CTRL2);
-+ writel(pp->mem_base, pcie->pci->dbi_base + PCIE20_PLR_IATU_LBAR);
-+ writel((pp->mem_base >> 32), pcie->pci->dbi_base + PCIE20_PLR_IATU_UBAR);
-+ writel(pp->mem_base + pp->mem_size - 1,
-+ pcie->pci->dbi_base + PCIE20_PLR_IATU_LAR);
-+ writel(pp->mem_bus_addr, pcie->pci->dbi_base + PCIE20_PLR_IATU_LTAR);
-+ writel(upper_32_bits(pp->mem_bus_addr),
-+ pcie->pci->dbi_base + PCIE20_PLR_IATU_UTAR);
-+
-+ /* 256B PCIE buffer setting */
-+ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
-+ writel(0x1, pcie->pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
-+}
-+
- static int qcom_pcie_get_resources_2_1_0(struct qcom_pcie *pcie)
- {
- struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-@@ -465,6 +540,9 @@ static int qcom_pcie_init_2_1_0(struct q
- writel(CFG_BRIDGE_SB_INIT,
- pci->dbi_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
-
-+ qcom_pcie_prog_viewport_cfg0(pcie, MSM_PCIE_DEV_CFG_ADDR);
-+ qcom_pcie_prog_viewport_mem2_outbound(pcie);
-+
- return 0;
-
- err_deassert_ahb:
diff --git a/target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch b/target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch
deleted file mode 100644
index 5dea084bfa..0000000000
--- a/target/linux/ipq806x/patches-4.14/0071-6-PCI-qcom-Force-GEN1-support.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 4910cfd150342ec7b038892262923c725a9c4001 Mon Sep 17 00:00:00 2001
-From: Sham Muthayyan <smuthayy@codeaurora.org>
-Date: Wed, 7 Sep 2016 16:44:28 +0530
-Subject: PCI: qcom: Force GEN1 support
-
-Change-Id: Ica54ddb737d7b851469deab1745f54bf431bd3f0
-Signed-off-by: Sham Muthayyan <smuthayy@codeaurora.org>
----
- drivers/pci/host/pcie-qcom.c | 13 +++++++++++++
- 1 file changed, 13 insertions(+)
-
---- a/drivers/pci/dwc/pcie-qcom.c
-+++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -129,6 +129,8 @@
- #define PCIE20_v3_PARF_SLV_ADDR_SPACE_SIZE 0x358
- #define SLV_ADDR_SPACE_SZ 0x10000000
-
-+#define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0
-+
- struct qcom_pcie_resources_2_1_0 {
- struct clk *iface_clk;
- struct clk *core_clk;
-@@ -218,6 +220,7 @@ struct qcom_pcie {
- struct phy *phy;
- struct gpio_desc *reset;
- struct qcom_pcie_ops *ops;
-+ uint32_t force_gen1;
- };
-
- #define to_qcom_pcie(x) dev_get_drvdata((x)->dev)
-@@ -532,6 +535,11 @@ static int qcom_pcie_init_2_1_0(struct q
-
- /* wait for clock acquisition */
- usleep_range(1000, 1500);
-+ if (pcie->force_gen1) {
-+ writel_relaxed((readl_relaxed(
-+ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2) | 1),
-+ pcie->pci->dbi_base + PCIE20_LNK_CONTROL2_LINK_STATUS2);
-+ }
-
-
- /* Set the Max TLP size to 2K, instead of using default of 4K */
-@@ -1382,6 +1390,8 @@ static int qcom_pcie_probe(struct platfo
- struct dw_pcie *pci;
- struct qcom_pcie *pcie;
- int ret;
-+ uint32_t force_gen1 = 0;
-+ struct device_node *np = pdev->dev.of_node;
-
- pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
- if (!pcie)
-@@ -1403,6 +1413,9 @@ static int qcom_pcie_probe(struct platfo
- if (IS_ERR(pcie->reset))
- return PTR_ERR(pcie->reset);
-
-+ of_property_read_u32(np, "force_gen1", &force_gen1);
-+ pcie->force_gen1 = force_gen1;
-+
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
- pcie->parf = devm_ioremap_resource(dev, res);
- if (IS_ERR(pcie->parf))
diff --git a/target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch b/target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch
deleted file mode 100644
index c7dfd53cb1..0000000000
--- a/target/linux/ipq806x/patches-4.14/0071-7-pcie-Set-PCIE-MRRS-and-MPS-to-256B.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From edff8f777c6321ca89bb950a382f409c4a126e28 Mon Sep 17 00:00:00 2001
-From: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
-Date: Thu, 15 Dec 2016 17:38:18 +0530
-Subject: pcie: Set PCIE MRRS and MPS to 256B
-
-Set Max Read Request Size and Max Payload Size to 256 bytes,
-per chip team recommendation.
-
-Change-Id: I097004be2ced1b3096ffc10c318aae0b2bb155e8
-Signed-off-by: Gokul Sriram Palanisamy <gpalan@codeaurora.org>
----
- drivers/pci/host/pcie-qcom.c | 37 +++++++++++++++++++++++++++++++++++++
- 1 file changed, 37 insertions(+)
-
-(limited to 'drivers/pci/host/pcie-qcom.c')
-
---- a/drivers/pci/dwc/pcie-qcom.c
-+++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -131,6 +131,14 @@
-
- #define PCIE20_LNK_CONTROL2_LINK_STATUS2 0xA0
-
-+#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b))
-+#define __mask(a, b) (((1 << ((a) + 1)) - 1) & ~((1 << (b)) - 1))
-+#define PCIE20_DEV_CAS 0x78
-+#define PCIE20_MRRS_MASK __mask(14, 12)
-+#define PCIE20_MRRS(x) __set(x, 14, 12)
-+#define PCIE20_MPS_MASK __mask(7, 5)
-+#define PCIE20_MPS(x) __set(x, 7, 5)
-+
- struct qcom_pcie_resources_2_1_0 {
- struct clk *iface_clk;
- struct clk *core_clk;
-@@ -1472,6 +1480,35 @@ static int qcom_pcie_probe(struct platfo
- return 0;
- }
-
-+static void qcom_pcie_fixup_final(struct pci_dev *dev)
-+{
-+ int cap, err;
-+ u16 ctl, reg_val;
-+
-+ cap = pci_pcie_cap(dev);
-+ if (!cap)
-+ return;
-+
-+ err = pci_read_config_word(dev, cap + PCI_EXP_DEVCTL, &ctl);
-+
-+ if (err)
-+ return;
-+
-+ reg_val = ctl;
-+
-+ if (((reg_val & PCIE20_MRRS_MASK) >> 12) > 1)
-+ reg_val = (reg_val & ~(PCIE20_MRRS_MASK)) | PCIE20_MRRS(0x1);
-+
-+ if (((ctl & PCIE20_MPS_MASK) >> 5) > 1)
-+ reg_val = (reg_val & ~(PCIE20_MPS_MASK)) | PCIE20_MPS(0x1);
-+
-+ err = pci_write_config_word(dev, cap + PCI_EXP_DEVCTL, reg_val);
-+
-+ if (err)
-+ pr_err("pcie config write failed %d\n", err);
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_ANY_ID, PCI_ANY_ID, qcom_pcie_fixup_final);
-+
- static const struct of_device_id qcom_pcie_match[] = {
- { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 },
- { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 },
diff --git a/target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch b/target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch
deleted file mode 100644
index 88bd7730c1..0000000000
--- a/target/linux/ipq806x/patches-4.14/0071-8-pcie-qcom-Fixed-pcie_phy_clk-branch-issue.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From b74bab6186131eea09459eedf5d737645a3559c9 Mon Sep 17 00:00:00 2001
-From: Abhishek Sahu <absahu@codeaurora.org>
-Date: Thu, 22 Dec 2016 11:18:45 +0530
-Subject: pcie: qcom: Fixed pcie_phy_clk branch issue
-
-Following backtraces are observed in PCIe deinit operation.
-
- Hardware name: Qualcomm (Flattened Device Tree)
- (unwind_backtrace) from [] (show_stack+0x10/0x14)
- (show_stack) from [] (dump_stack+0x84/0x98)
- (dump_stack) from [] (warn_slowpath_common+0x9c/0xb8)
- (warn_slowpath_common) from [] (warn_slowpath_fmt+0x30/0x40)
- (warn_slowpath_fmt) from [] (clk_branch_wait+0x114/0x120)
- (clk_branch_wait) from [] (clk_core_disable+0xd0/0x1f4)
- (clk_core_disable) from [] (clk_disable+0x24/0x30)
- (clk_disable) from [] (qcom_pcie_deinit_v0+0x6c/0xb8)
- (qcom_pcie_deinit_v0) from [] (qcom_pcie_host_init+0xe0/0xe8)
- (qcom_pcie_host_init) from [] (dw_pcie_host_init+0x3b0/0x538)
- (dw_pcie_host_init) from [] (qcom_pcie_probe+0x20c/0x2e4)
-
-pcie_phy_clk is generated for PCIe controller itself and the
-GCC controls its branch operation. This error is coming since
-the assert operations turn off the parent clock before branch
-clock. Now this patch moves clk_disable_unprepare before assert
-operations.
-
-Similarly, during probe function, the clock branch operation
-should be done after dessert operation. Currently, it does not
-generate any error since bootloader enables the pcie_phy_clk
-but the same error is coming during probe, if bootloader
-disables pcie_phy_clk.
-
-Change-Id: Ib29c154d10eb64363d9cc982ce5fd8107af5627d
-Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
----
- drivers/pci/host/pcie-qcom.c | 16 +++++++---------
- 1 file changed, 7 insertions(+), 9 deletions(-)
-
---- a/drivers/pci/dwc/pcie-qcom.c
-+++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -407,6 +407,7 @@ static void qcom_pcie_deinit_2_1_0(struc
- {
- struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-
-+ clk_disable_unprepare(res->phy_clk);
- reset_control_assert(res->pci_reset);
- reset_control_assert(res->axi_reset);
- reset_control_assert(res->ahb_reset);
-@@ -415,7 +416,6 @@ static void qcom_pcie_deinit_2_1_0(struc
- reset_control_assert(res->ext_reset);
- clk_disable_unprepare(res->iface_clk);
- clk_disable_unprepare(res->core_clk);
-- clk_disable_unprepare(res->phy_clk);
- clk_disable_unprepare(res->aux_clk);
- clk_disable_unprepare(res->ref_clk);
- regulator_disable(res->vdda);
-@@ -472,12 +472,6 @@ static int qcom_pcie_init_2_1_0(struct q
- goto err_clk_core;
- }
-
-- ret = clk_prepare_enable(res->phy_clk);
-- if (ret) {
-- dev_err(dev, "cannot prepare/enable phy clock\n");
-- goto err_clk_phy;
-- }
--
- ret = clk_prepare_enable(res->aux_clk);
- if (ret) {
- dev_err(dev, "cannot prepare/enable aux clock\n");
-@@ -541,6 +535,12 @@ static int qcom_pcie_init_2_1_0(struct q
- return ret;
- }
-
-+ ret = clk_prepare_enable(res->phy_clk);
-+ if (ret) {
-+ dev_err(dev, "cannot prepare/enable phy clock\n");
-+ goto err_deassert_ahb;
-+ }
-+
- /* wait for clock acquisition */
- usleep_range(1000, 1500);
- if (pcie->force_gen1) {
-@@ -566,8 +566,6 @@ err_deassert_ahb:
- err_clk_ref:
- clk_disable_unprepare(res->aux_clk);
- err_clk_aux:
-- clk_disable_unprepare(res->phy_clk);
--err_clk_phy:
- clk_disable_unprepare(res->core_clk);
- err_clk_core:
- clk_disable_unprepare(res->iface_clk);
diff --git a/target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch b/target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch
deleted file mode 100644
index 227a1b4e7a..0000000000
--- a/target/linux/ipq806x/patches-4.14/0071-9-pcie-qcom-change-duplicate-pci-reset-to-phy-reset.patch
+++ /dev/null
@@ -1,25 +0,0 @@
-From 1a9c48123bd09f75562b6a2ee0f0a7b2d533cd45 Mon Sep 17 00:00:00 2001
-From: Abhishek Sahu <absahu@codeaurora.org>
-Date: Thu, 22 Dec 2016 11:50:49 +0530
-Subject: pcie: qcom: change duplicate pci reset to phy reset
-
-The deinit issues reset_control_assert for pci twice and
-does not contain phy reset.
-
-Change-Id: Iba849963c7e5f9a2a1063f0e2e89635df70b8a99
-Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
----
- drivers/pci/host/pcie-qcom.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/pci/dwc/pcie-qcom.c
-+++ b/drivers/pci/dwc/pcie-qcom.c
-@@ -408,7 +408,7 @@ static void qcom_pcie_deinit_2_1_0(struc
- struct qcom_pcie_resources_2_1_0 *res = &pcie->res.v2_1_0;
-
- clk_disable_unprepare(res->phy_clk);
-- reset_control_assert(res->pci_reset);
-+ reset_control_assert(res->phy_reset);
- reset_control_assert(res->axi_reset);
- reset_control_assert(res->ahb_reset);
- reset_control_assert(res->por_reset);
diff --git a/target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch b/target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch
deleted file mode 100644
index 035281f66a..0000000000
--- a/target/linux/ipq806x/patches-4.14/0072-add-ipq806x-with-no-clocks.patch
+++ /dev/null
@@ -1,12 +0,0 @@
---- a/drivers/firmware/qcom_scm.c
-+++ b/drivers/firmware/qcom_scm.c
-@@ -422,6 +422,9 @@ static const struct of_device_id qcom_sc
- { .compatible = "qcom,scm-msm8996",
- .data = NULL, /* no clocks */
- },
-+ { .compatible = "qcom,scm-ipq806x",
-+ .data = NULL, /* no clocks */
-+ },
- { .compatible = "qcom,scm",
- .data = (void *)(SCM_HAS_CORE_CLK
- | SCM_HAS_IFACE_CLK
diff --git a/target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch b/target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
deleted file mode 100644
index f57773ef48..0000000000
--- a/target/linux/ipq806x/patches-4.14/0073-pinctrl-qom-use-scm_call-to-route-GPIO-irq-to-Apps.patch
+++ /dev/null
@@ -1,183 +0,0 @@
-From 2034addc7e193dc81d7ca60d8884832751b76758 Mon Sep 17 00:00:00 2001
-From: Ajay Kishore <akisho@codeaurora.org>
-Date: Tue, 24 Jan 2017 14:14:16 +0530
-Subject: pinctrl: qcom: use scm_call to route GPIO irq to Apps
-
-For IPQ806x targets, TZ protects the registers that are used to
-configure the routing of interrupts to a target processor.
-To resolve this, this patch uses scm call to route GPIO interrupts
-to application processor. Also the scm call interface is changed.
-
-Change-Id: Ib6c06829d04bc8c20483c36e63da92e26cdef9ce
-Signed-off-by: Ajay Kishore <akisho@codeaurora.org>
----
- drivers/firmware/qcom_scm-32.c | 17 +++++++++++++++++
- drivers/firmware/qcom_scm-64.c | 9 +++++++++
- drivers/firmware/qcom_scm.c | 13 +++++++++++++
- drivers/firmware/qcom_scm.h | 8 ++++++++
- drivers/pinctrl/qcom/pinctrl-msm.c | 34 ++++++++++++++++++++++++++++------
- include/linux/qcom_scm.h | 3 ++-
- 6 files changed, 77 insertions(+), 7 deletions(-)
-
---- a/drivers/firmware/qcom_scm-32.c
-+++ b/drivers/firmware/qcom_scm-32.c
-@@ -561,6 +561,24 @@ int __qcom_scm_pas_mss_reset(struct devi
- return ret ? : le32_to_cpu(out);
- }
-
-+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
-+{
-+ s32 ret;
-+
-+ ret = qcom_scm_call_atomic1(svc_id, cmd_id, arg1);
-+
-+ return ret;
-+}
-+
-+int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2)
-+{
-+ s32 ret;
-+
-+ ret = qcom_scm_call_atomic2(svc_id, cmd_id, arg1, arg2);
-+
-+ return ret;
-+}
-+
- int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
- {
- struct {
---- a/drivers/firmware/qcom_scm-64.c
-+++ b/drivers/firmware/qcom_scm-64.c
-@@ -366,6 +366,16 @@ int __qcom_scm_pas_mss_reset(struct devi
- return ret ? : res.a1;
- }
-
-+int __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1)
-+{
-+ return -ENOTSUPP;
-+}
-+
-+int __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2)
-+{
-+ return -ENOTSUPP;
-+}
-+
- int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
- {
- struct qcom_scm_desc desc = {0};
---- a/drivers/firmware/qcom_scm.c
-+++ b/drivers/firmware/qcom_scm.c
-@@ -470,3 +470,16 @@ static int __init qcom_scm_init(void)
- return platform_driver_register(&qcom_scm_driver);
- }
- subsys_initcall(qcom_scm_init);
-+
-+int qcom_scm_pinmux_read(u32 arg1)
-+{
-+ return __qcom_scm_pinmux_read(SCM_SVC_IO_ACCESS, SCM_IO_READ, arg1);
-+}
-+EXPORT_SYMBOL(qcom_scm_pinmux_read);
-+
-+int qcom_scm_pinmux_write(u32 arg1, u32 arg2)
-+{
-+ return __qcom_scm_pinmux_write(SCM_SVC_IO_ACCESS, SCM_IO_WRITE,
-+ arg1, arg2);
-+}
-+EXPORT_SYMBOL(qcom_scm_pinmux_write);
---- a/drivers/firmware/qcom_scm.h
-+++ b/drivers/firmware/qcom_scm.h
-@@ -58,6 +58,13 @@ extern int __qcom_scm_pas_auth_and_rese
- extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
- extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
-
-+#define SCM_IO_READ 1
-+#define SCM_IO_WRITE 2
-+#define SCM_SVC_IO_ACCESS 0x5
-+
-+s32 __qcom_scm_pinmux_read(u32 svc_id, u32 cmd_id, u32 arg1);
-+s32 __qcom_scm_pinmux_write(u32 svc_id, u32 cmd_id, u32 arg1, u32 arg2);
-+
- /* common error codes */
- #define QCOM_SCM_V2_EBUSY -12
- #define QCOM_SCM_ENOMEM -5
---- a/drivers/pinctrl/qcom/pinctrl-msm.c
-+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
-@@ -30,7 +30,8 @@
- #include <linux/reboot.h>
- #include <linux/pm.h>
- #include <linux/log2.h>
--
-+#include <linux/qcom_scm.h>
-+#include <linux/io.h>
- #include "../core.h"
- #include "../pinconf.h"
- #include "pinctrl-msm.h"
-@@ -646,6 +647,9 @@ static void msm_gpio_irq_ack(struct irq_
- const struct msm_pingroup *g;
- unsigned long flags;
- u32 val;
-+ u32 addr;
-+ int ret;
-+ const __be32 *reg;
-
- g = &pctrl->soc->groups[d->hwirq];
-
-@@ -684,11 +688,30 @@ static int msm_gpio_irq_set_type(struct
- else
- clear_bit(d->hwirq, pctrl->dual_edge_irqs);
-
-+ int ret = of_device_is_compatible(pctrl->dev->of_node,
-+ "qcom,ipq8064-pinctrl");
- /* Route interrupts to application cpu */
-- val = readl(pctrl->regs + g->intr_target_reg);
-- val &= ~(7 << g->intr_target_bit);
-- val |= g->intr_target_kpss_val << g->intr_target_bit;
-- writel(val, pctrl->regs + g->intr_target_reg);
-+ if (!ret) {
-+ val = readl(pctrl->regs + g->intr_target_reg);
-+ val &= ~(7 << g->intr_target_bit);
-+ val |= g->intr_target_kpss_val << g->intr_target_bit;
-+ writel(val, pctrl->regs + g->intr_target_reg);
-+ } else {
-+ const __be32 *reg = of_get_property(pctrl->dev->of_node, "reg", NULL);
-+ if (reg) {
-+ u32 addr = be32_to_cpup(reg) + g->intr_target_reg;
-+ val = qcom_scm_pinmux_read(addr);
-+ __iormb();
-+
-+ val &= ~(7 << g->intr_target_bit);
-+ val |= g->intr_target_kpss_val << g->intr_target_bit;
-+
-+ __iowmb();
-+ ret = qcom_scm_pinmux_write(addr, val);
-+ if (ret)
-+ pr_err("\n Routing interrupts to Apps proc failed");
-+ }
-+ }
-
- /* Update configuration for gpio.
- * RAW_STATUS_EN is left on for all gpio irqs. Due to the
-@@ -975,4 +998,3 @@ int msm_pinctrl_remove(struct platform_d
- return 0;
- }
- EXPORT_SYMBOL(msm_pinctrl_remove);
--
---- a/include/linux/qcom_scm.h
-+++ b/include/linux/qcom_scm.h
-@@ -43,6 +43,8 @@ extern int qcom_scm_set_remote_state(u32
- extern int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare);
- extern int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size);
- extern int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare);
-+extern s32 qcom_scm_pinmux_read(u32 arg1);
-+extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2);
- #else
-
- #include <linux/errno.h>
-@@ -76,5 +78,7 @@ qcom_scm_set_remote_state(u32 state,u32
- static inline int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare) { return -ENODEV; }
- static inline int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size) { return -ENODEV; }
- static inline int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare) { return -ENODEV; }
-+extern s32 qcom_scm_pinmux_read(u32 arg1) { return -ENODEV; }
-+extern s32 qcom_scm_pinmux_write(u32 arg1, u32 arg2) { return -ENODEV; }
- #endif
- #endif
diff --git a/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch b/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch
deleted file mode 100644
index ee410ca6fa..0000000000
--- a/target/linux/ipq806x/patches-4.14/0074-ipq806x-usb-Control-USB-master-reset.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From a86bda9f8a7965f0cedd347a9c04800eb9f41ea3 Mon Sep 17 00:00:00 2001
-From: Vasudevan Murugesan <vmuruges@codeaurora.org>
-Date: Tue, 21 Jul 2015 10:22:38 +0530
-Subject: ipq806x: usb: Control USB master reset
-
-During removal of the glue layer(dwc3-of-simple),
-USB master reset is set to active and during insertion
-it is de-activated.
-
-Change-Id: I537dc810f6cb2a46664ee674840145066432b957
-Signed-off-by: Vasudevan Murugesan <vmuruges@codeaurora.org>
-(cherry picked from commit 4611e13580a216812f85f0801b95442d02eeb836)
----
- drivers/usb/dwc3/dwc3-of-simple.c | 22 ++++++++++++++++++++++
- 1 file changed, 12 insertions(+)
-
-(limited to 'drivers/usb/dwc3/dwc3-of-simple.c')
-
---- a/drivers/usb/dwc3/dwc3-of-simple.c
-+++ b/drivers/usb/dwc3/dwc3-of-simple.c
-@@ -25,6 +25,7 @@
- #include <linux/platform_device.h>
- #include <linux/dma-mapping.h>
- #include <linux/clk.h>
-+#include <linux/reset.h>
- #include <linux/of.h>
- #include <linux/of_platform.h>
- #include <linux/pm_runtime.h>
-@@ -33,6 +34,8 @@ struct dwc3_of_simple {
- struct device *dev;
- struct clk **clks;
- int num_clocks;
-+ struct reset_control *mstr_rst_30_0;
-+ struct reset_control *mstr_rst_30_1;
- };
-
- static int dwc3_of_simple_clk_init(struct dwc3_of_simple *simple, int count)
-@@ -102,6 +105,20 @@ static int dwc3_of_simple_probe(struct p
- if (ret)
- return ret;
-
-+ simple->mstr_rst_30_0 = devm_reset_control_get(dev, "usb30_0_mstr_rst");
-+
-+ if (!IS_ERR(simple->mstr_rst_30_0))
-+ reset_control_deassert(simple->mstr_rst_30_0);
-+ else
-+ dev_dbg(simple->dev, "cannot get handle for USB PHY 0 master reset control\n");
-+
-+ simple->mstr_rst_30_1 = devm_reset_control_get(dev, "usb30_1_mstr_rst");
-+
-+ if (!IS_ERR(simple->mstr_rst_30_1))
-+ reset_control_deassert(simple->mstr_rst_30_1);
-+ else
-+ dev_dbg(simple->dev, "cannot get handle for USB PHY 1 master reset control\n");
-+
- ret = of_platform_populate(np, NULL, NULL, dev);
- if (ret) {
- for (i = 0; i < simple->num_clocks; i++) {
-@@ -130,6 +147,12 @@ static int dwc3_of_simple_remove(struct
- clk_put(simple->clks[i]);
- }
-
-+ if (!IS_ERR(simple->mstr_rst_30_0))
-+ reset_control_assert(simple->mstr_rst_30_0);
-+
-+ if (!IS_ERR(simple->mstr_rst_30_1))
-+ reset_control_assert(simple->mstr_rst_30_1);
-+
- of_platform_depopulate(dev);
-
- pm_runtime_disable(dev);
diff --git a/target/linux/ipq806x/patches-4.14/0075-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch b/target/linux/ipq806x/patches-4.14/0075-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch
deleted file mode 100644
index 2867239d1c..0000000000
--- a/target/linux/ipq806x/patches-4.14/0075-ipq8064-pinctrl-Fixed-missing-RGMII-pincontrol-defin.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From a3488aa9bed37c56e405967d44e821c484b5d6b9 Mon Sep 17 00:00:00 2001
-From: Ram Chandra Jangir <rjangir@codeaurora.org>
-Date: Fri, 28 Sep 2018 15:19:50 +0530
-Subject: [PATCH] ipq8064: pinctrl: Fixed missing RGMII pincontrol definitions
-
-Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
----
- drivers/pinctrl/qcom/pinctrl-ipq8064.c | 10 +++++-----
- 1 file changed, 5 insertions(+), 5 deletions(-)
-
---- a/drivers/pinctrl/qcom/pinctrl-ipq8064.c
-+++ b/drivers/pinctrl/qcom/pinctrl-ipq8064.c
-@@ -308,7 +308,7 @@ static const char * const gpio_groups[]
- };
-
- static const char * const mdio_groups[] = {
-- "gpio0", "gpio1", "gpio10", "gpio11",
-+ "gpio0", "gpio1", "gpio2", "gpio10", "gpio11", "gpio66",
- };
-
- static const char * const mi2s_groups[] = {
-@@ -412,8 +412,8 @@ static const char * const usb2_hsic_grou
- };
-
- static const char * const rgmii2_groups[] = {
-- "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-- "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62",
-+ "gpio2", "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+ "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62", "gpio66",
- };
-
- static const char * const sata_groups[] = {
-@@ -548,7 +548,7 @@ static const struct msm_function ipq8064
- static const struct msm_pingroup ipq8064_groups[] = {
- PINGROUP(0, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(1, mdio, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(2, gsbi5_spi_cs3, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(2, gsbi5_spi_cs3, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(3, pcie1_rst, pcie1_prsnt, pdm, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(4, pcie1_pwren_n, pcie1_pwren, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(5, pcie1_clk_req, pcie1_pwrflt, NA, NA, NA, NA, NA, NA, NA, NA),
-@@ -612,7 +612,7 @@ static const struct msm_pingroup ipq8064
- PINGROUP(63, pcie3_rst, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(64, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(65, pcie3_clk_req, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-- PINGROUP(66, NA, NA, NA, NA, NA, NA, NA, NA, NA, NA),
-+ PINGROUP(66, rgmii2, mdio, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(67, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- PINGROUP(68, usb2_hsic, NA, NA, NA, NA, NA, NA, NA, NA, NA),
- SDC_PINGROUP(sdc3_clk, 0x204a, 14, 6),
diff --git a/target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch b/target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch
deleted file mode 100644
index 2bd18ffa19..0000000000
--- a/target/linux/ipq806x/patches-4.14/105-mtd-nor-add-mx25l25635f.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-Subject: mtd: spi-nor: add mx25l25635f with SECT_4K
-
-This patch fixes an issue with the creation of the
-ubi volume on the AVM FRITZ!Box 4040. The mx25l25635f
-and mx25l25635e support SECT_4K which will set the
-erase size to 4K. This is used by ubi to calculate
-VID header offsets. Without this, uboot and linux
-disagrees about the layout and refuse to attach
-the ubi volume created by the other.
-
----
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -1036,7 +1036,7 @@ static const struct flash_info spi_nor_i
- { "mx25u6435f", INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
- { "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
- { "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
-- { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+ { "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SECT_4K) },
- { "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
- { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
- { "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
diff --git a/target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch b/target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch
deleted file mode 100644
index cd9fd895c5..0000000000
--- a/target/linux/ipq806x/patches-4.14/310-msm-adhoc-bus-support.patch
+++ /dev/null
@@ -1,11026 +0,0 @@
-From: Christian Lamparter <chunkeey@googlemail.com>
-Subject: BUS: add MSM_BUS
---- a/drivers/bus/Makefile
-+++ b/drivers/bus/Makefile
-@@ -11,6 +11,7 @@ obj-$(CONFIG_BRCMSTB_GISB_ARB) += brcmst
- obj-$(CONFIG_IMX_WEIM) += imx-weim.o
- obj-$(CONFIG_MIPS_CDMM) += mips_cdmm.o
- obj-$(CONFIG_MVEBU_MBUS) += mvebu-mbus.o
-+obj-$(CONFIG_BUS_TOPOLOGY_ADHOC)+= msm_bus/
-
- # Interconnect bus driver for OMAP SoCs.
- obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
---- a/drivers/bus/Kconfig
-+++ b/drivers/bus/Kconfig
-@@ -93,6 +93,8 @@ config MVEBU_MBUS
- Driver needed for the MBus configuration on Marvell EBU SoCs
- (Kirkwood, Dove, Orion5x, MV78XX0 and Armada 370/XP).
-
-+source "drivers/bus/msm_bus/Kconfig"
-+
- config OMAP_INTERCONNECT
- tristate "OMAP INTERCONNECT DRIVER"
- depends on ARCH_OMAP2PLUS
---- /dev/null
-+++ b/include/dt-bindings/msm/msm-bus-ids.h
-@@ -0,0 +1,869 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __MSM_BUS_IDS_H
-+#define __MSM_BUS_IDS_H
-+
-+/* Topology related enums */
-+#define MSM_BUS_FAB_DEFAULT 0
-+#define MSM_BUS_FAB_APPSS 0
-+#define MSM_BUS_FAB_SYSTEM 1024
-+#define MSM_BUS_FAB_MMSS 2048
-+#define MSM_BUS_FAB_SYSTEM_FPB 3072
-+#define MSM_BUS_FAB_CPSS_FPB 4096
-+
-+#define MSM_BUS_FAB_BIMC 0
-+#define MSM_BUS_FAB_SYS_NOC 1024
-+#define MSM_BUS_FAB_MMSS_NOC 2048
-+#define MSM_BUS_FAB_OCMEM_NOC 3072
-+#define MSM_BUS_FAB_PERIPH_NOC 4096
-+#define MSM_BUS_FAB_CONFIG_NOC 5120
-+#define MSM_BUS_FAB_OCMEM_VNOC 6144
-+#define MSM_BUS_FAB_MMSS_AHB 2049
-+#define MSM_BUS_FAB_A0_NOC 6145
-+#define MSM_BUS_FAB_A1_NOC 6146
-+#define MSM_BUS_FAB_A2_NOC 6147
-+
-+#define MSM_BUS_MASTER_FIRST 1
-+#define MSM_BUS_MASTER_AMPSS_M0 1
-+#define MSM_BUS_MASTER_AMPSS_M1 2
-+#define MSM_BUS_APPSS_MASTER_FAB_MMSS 3
-+#define MSM_BUS_APPSS_MASTER_FAB_SYSTEM 4
-+#define MSM_BUS_SYSTEM_MASTER_FAB_APPSS 5
-+#define MSM_BUS_MASTER_SPS 6
-+#define MSM_BUS_MASTER_ADM_PORT0 7
-+#define MSM_BUS_MASTER_ADM_PORT1 8
-+#define MSM_BUS_SYSTEM_MASTER_ADM1_PORT0 9
-+#define MSM_BUS_MASTER_ADM1_PORT1 10
-+#define MSM_BUS_MASTER_LPASS_PROC 11
-+#define MSM_BUS_MASTER_MSS_PROCI 12
-+#define MSM_BUS_MASTER_MSS_PROCD 13
-+#define MSM_BUS_MASTER_MSS_MDM_PORT0 14
-+#define MSM_BUS_MASTER_LPASS 15
-+#define MSM_BUS_SYSTEM_MASTER_CPSS_FPB 16
-+#define MSM_BUS_SYSTEM_MASTER_SYSTEM_FPB 17
-+#define MSM_BUS_SYSTEM_MASTER_MMSS_FPB 18
-+#define MSM_BUS_MASTER_ADM1_CI 19
-+#define MSM_BUS_MASTER_ADM0_CI 20
-+#define MSM_BUS_MASTER_MSS_MDM_PORT1 21
-+#define MSM_BUS_MASTER_MDP_PORT0 22
-+#define MSM_BUS_MASTER_MDP_PORT1 23
-+#define MSM_BUS_MMSS_MASTER_ADM1_PORT0 24
-+#define MSM_BUS_MASTER_ROTATOR 25
-+#define MSM_BUS_MASTER_GRAPHICS_3D 26
-+#define MSM_BUS_MASTER_JPEG_DEC 27
-+#define MSM_BUS_MASTER_GRAPHICS_2D_CORE0 28
-+#define MSM_BUS_MASTER_VFE 29
-+#define MSM_BUS_MASTER_VPE 30
-+#define MSM_BUS_MASTER_JPEG_ENC 31
-+#define MSM_BUS_MASTER_GRAPHICS_2D_CORE1 32
-+#define MSM_BUS_MMSS_MASTER_APPS_FAB 33
-+#define MSM_BUS_MASTER_HD_CODEC_PORT0 34
-+#define MSM_BUS_MASTER_HD_CODEC_PORT1 35
-+#define MSM_BUS_MASTER_SPDM 36
-+#define MSM_BUS_MASTER_RPM 37
-+#define MSM_BUS_MASTER_MSS 38
-+#define MSM_BUS_MASTER_RIVA 39
-+#define MSM_BUS_MASTER_SNOC_VMEM 40
-+#define MSM_BUS_MASTER_MSS_SW_PROC 41
-+#define MSM_BUS_MASTER_MSS_FW_PROC 42
-+#define MSM_BUS_MASTER_HMSS 43
-+#define MSM_BUS_MASTER_GSS_NAV 44
-+#define MSM_BUS_MASTER_PCIE 45
-+#define MSM_BUS_MASTER_SATA 46
-+#define MSM_BUS_MASTER_CRYPTO 47
-+#define MSM_BUS_MASTER_VIDEO_CAP 48
-+#define MSM_BUS_MASTER_GRAPHICS_3D_PORT1 49
-+#define MSM_BUS_MASTER_VIDEO_ENC 50
-+#define MSM_BUS_MASTER_VIDEO_DEC 51
-+#define MSM_BUS_MASTER_LPASS_AHB 52
-+#define MSM_BUS_MASTER_QDSS_BAM 53
-+#define MSM_BUS_MASTER_SNOC_CFG 54
-+#define MSM_BUS_MASTER_CRYPTO_CORE0 55
-+#define MSM_BUS_MASTER_CRYPTO_CORE1 56
-+#define MSM_BUS_MASTER_MSS_NAV 57
-+#define MSM_BUS_MASTER_OCMEM_DMA 58
-+#define MSM_BUS_MASTER_WCSS 59
-+#define MSM_BUS_MASTER_QDSS_ETR 60
-+#define MSM_BUS_MASTER_USB3 61
-+#define MSM_BUS_MASTER_JPEG 62
-+#define MSM_BUS_MASTER_VIDEO_P0 63
-+#define MSM_BUS_MASTER_VIDEO_P1 64
-+#define MSM_BUS_MASTER_MSS_PROC 65
-+#define MSM_BUS_MASTER_JPEG_OCMEM 66
-+#define MSM_BUS_MASTER_MDP_OCMEM 67
-+#define MSM_BUS_MASTER_VIDEO_P0_OCMEM 68
-+#define MSM_BUS_MASTER_VIDEO_P1_OCMEM 69
-+#define MSM_BUS_MASTER_VFE_OCMEM 70
-+#define MSM_BUS_MASTER_CNOC_ONOC_CFG 71
-+#define MSM_BUS_MASTER_RPM_INST 72
-+#define MSM_BUS_MASTER_RPM_DATA 73
-+#define MSM_BUS_MASTER_RPM_SYS 74
-+#define MSM_BUS_MASTER_DEHR 75
-+#define MSM_BUS_MASTER_QDSS_DAP 76
-+#define MSM_BUS_MASTER_TIC 77
-+#define MSM_BUS_MASTER_SDCC_1 78
-+#define MSM_BUS_MASTER_SDCC_3 79
-+#define MSM_BUS_MASTER_SDCC_4 80
-+#define MSM_BUS_MASTER_SDCC_2 81
-+#define MSM_BUS_MASTER_TSIF 82
-+#define MSM_BUS_MASTER_BAM_DMA 83
-+#define MSM_BUS_MASTER_BLSP_2 84
-+#define MSM_BUS_MASTER_USB_HSIC 85
-+#define MSM_BUS_MASTER_BLSP_1 86
-+#define MSM_BUS_MASTER_USB_HS 87
-+#define MSM_BUS_MASTER_PNOC_CFG 88
-+#define MSM_BUS_MASTER_V_OCMEM_GFX3D 89
-+#define MSM_BUS_MASTER_IPA 90
-+#define MSM_BUS_MASTER_QPIC 91
-+#define MSM_BUS_MASTER_MDPE 92
-+#define MSM_BUS_MASTER_USB_HS2 93
-+#define MSM_BUS_MASTER_VPU 94
-+#define MSM_BUS_MASTER_UFS 95
-+#define MSM_BUS_MASTER_BCAST 96
-+#define MSM_BUS_MASTER_CRYPTO_CORE2 97
-+#define MSM_BUS_MASTER_EMAC 98
-+#define MSM_BUS_MASTER_VPU_1 99
-+#define MSM_BUS_MASTER_PCIE_1 100
-+#define MSM_BUS_MASTER_USB3_1 101
-+#define MSM_BUS_MASTER_CNOC_MNOC_MMSS_CFG 102
-+#define MSM_BUS_MASTER_CNOC_MNOC_CFG 103
-+#define MSM_BUS_MASTER_TCU_0 104
-+#define MSM_BUS_MASTER_TCU_1 105
-+#define MSM_BUS_MASTER_CPP 106
-+#define MSM_BUS_MASTER_AUDIO 107
-+#define MSM_BUS_MASTER_PCIE_2 108
-+#define MSM_BUS_MASTER_BLSP_BAM 109
-+#define MSM_BUS_MASTER_USB2_BAM 110
-+#define MSM_BUS_MASTER_ADDS_DMA0 111
-+#define MSM_BUS_MASTER_ADDS_DMA1 112
-+#define MSM_BUS_MASTER_ADDS_DMA2 113
-+#define MSM_BUS_MASTER_ADDS_DMA3 114
-+#define MSM_BUS_MASTER_QPIC_BAM 115
-+#define MSM_BUS_MASTER_SDCC_BAM 116
-+#define MSM_BUS_MASTER_DDRC_SNOC 117
-+#define MSM_BUS_MASTER_WSS_0 118
-+#define MSM_BUS_MASTER_WSS_1 119
-+#define MSM_BUS_MASTER_ESS 120
-+#define MSM_BUS_MASTER_QDSS_BAMNDP 121
-+#define MSM_BUS_MASTER_QDSS_SNOC_CFG 122
-+#define MSM_BUS_MASTER_LAST 130
-+
-+#define MSM_BUS_SYSTEM_FPB_MASTER_SYSTEM MSM_BUS_SYSTEM_MASTER_SYSTEM_FPB
-+#define MSM_BUS_CPSS_FPB_MASTER_SYSTEM MSM_BUS_SYSTEM_MASTER_CPSS_FPB
-+
-+#define MSM_BUS_SNOC_MM_INT_0 10000
-+#define MSM_BUS_SNOC_MM_INT_1 10001
-+#define MSM_BUS_SNOC_MM_INT_2 10002
-+#define MSM_BUS_SNOC_MM_INT_BIMC 10003
-+#define MSM_BUS_SNOC_INT_0 10004
-+#define MSM_BUS_SNOC_INT_1 10005
-+#define MSM_BUS_SNOC_INT_BIMC 10006
-+#define MSM_BUS_SNOC_BIMC_0_MAS 10007
-+#define MSM_BUS_SNOC_BIMC_1_MAS 10008
-+#define MSM_BUS_SNOC_QDSS_INT 10009
-+#define MSM_BUS_PNOC_SNOC_MAS 10010
-+#define MSM_BUS_PNOC_SNOC_SLV 10011
-+#define MSM_BUS_PNOC_INT_0 10012
-+#define MSM_BUS_PNOC_INT_1 10013
-+#define MSM_BUS_PNOC_M_0 10014
-+#define MSM_BUS_PNOC_M_1 10015
-+#define MSM_BUS_BIMC_SNOC_MAS 10016
-+#define MSM_BUS_BIMC_SNOC_SLV 10017
-+#define MSM_BUS_PNOC_SLV_0 10018
-+#define MSM_BUS_PNOC_SLV_1 10019
-+#define MSM_BUS_PNOC_SLV_2 10020
-+#define MSM_BUS_PNOC_SLV_3 10021
-+#define MSM_BUS_PNOC_SLV_4 10022
-+#define MSM_BUS_PNOC_SLV_8 10023
-+#define MSM_BUS_PNOC_SLV_9 10024
-+#define MSM_BUS_SNOC_BIMC_0_SLV 10025
-+#define MSM_BUS_SNOC_BIMC_1_SLV 10026
-+#define MSM_BUS_MNOC_BIMC_MAS 10027
-+#define MSM_BUS_MNOC_BIMC_SLV 10028
-+#define MSM_BUS_BIMC_MNOC_MAS 10029
-+#define MSM_BUS_BIMC_MNOC_SLV 10030
-+#define MSM_BUS_SNOC_BIMC_MAS 10031
-+#define MSM_BUS_SNOC_BIMC_SLV 10032
-+#define MSM_BUS_CNOC_SNOC_MAS 10033
-+#define MSM_BUS_CNOC_SNOC_SLV 10034
-+#define MSM_BUS_SNOC_CNOC_MAS 10035
-+#define MSM_BUS_SNOC_CNOC_SLV 10036
-+#define MSM_BUS_OVNOC_SNOC_MAS 10037
-+#define MSM_BUS_OVNOC_SNOC_SLV 10038
-+#define MSM_BUS_SNOC_OVNOC_MAS 10039
-+#define MSM_BUS_SNOC_OVNOC_SLV 10040
-+#define MSM_BUS_SNOC_PNOC_MAS 10041
-+#define MSM_BUS_SNOC_PNOC_SLV 10042
-+#define MSM_BUS_BIMC_INT_APPS_EBI 10043
-+#define MSM_BUS_BIMC_INT_APPS_SNOC 10044
-+#define MSM_BUS_SNOC_BIMC_2_MAS 10045
-+#define MSM_BUS_SNOC_BIMC_2_SLV 10046
-+#define MSM_BUS_PNOC_SLV_5 10047
-+#define MSM_BUS_PNOC_SLV_6 10048
-+#define MSM_BUS_PNOC_INT_2 10049
-+#define MSM_BUS_PNOC_INT_3 10050
-+#define MSM_BUS_PNOC_INT_4 10051
-+#define MSM_BUS_PNOC_INT_5 10052
-+#define MSM_BUS_PNOC_INT_6 10053
-+#define MSM_BUS_PNOC_INT_7 10054
-+#define MSM_BUS_BIMC_SNOC_1_MAS 10055
-+#define MSM_BUS_BIMC_SNOC_1_SLV 10056
-+#define MSM_BUS_PNOC_A1NOC_MAS 10057
-+#define MSM_BUS_PNOC_A1NOC_SLV 10058
-+#define MSM_BUS_CNOC_A1NOC_MAS 10059
-+#define MSM_BUS_A0NOC_SNOC_MAS 10060
-+#define MSM_BUS_A0NOC_SNOC_SLV 10061
-+#define MSM_BUS_A1NOC_SNOC_SLV 10062
-+#define MSM_BUS_A1NOC_SNOC_MAS 10063
-+#define MSM_BUS_A2NOC_SNOC_MAS 10064
-+#define MSM_BUS_A2NOC_SNOC_SLV 10065
-+#define MSM_BUS_PNOC_SLV_7 10066
-+#define MSM_BUS_INT_LAST 10067
-+
-+#define MSM_BUS_SLAVE_FIRST 512
-+#define MSM_BUS_SLAVE_EBI_CH0 512
-+#define MSM_BUS_SLAVE_EBI_CH1 513
-+#define MSM_BUS_SLAVE_AMPSS_L2 514
-+#define MSM_BUS_APPSS_SLAVE_FAB_MMSS 515
-+#define MSM_BUS_APPSS_SLAVE_FAB_SYSTEM 516
-+#define MSM_BUS_SYSTEM_SLAVE_FAB_APPS 517
-+#define MSM_BUS_SLAVE_SPS 518
-+#define MSM_BUS_SLAVE_SYSTEM_IMEM 519
-+#define MSM_BUS_SLAVE_AMPSS 520
-+#define MSM_BUS_SLAVE_MSS 521
-+#define MSM_BUS_SLAVE_LPASS 522
-+#define MSM_BUS_SYSTEM_SLAVE_CPSS_FPB 523
-+#define MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB 524
-+#define MSM_BUS_SYSTEM_SLAVE_MMSS_FPB 525
-+#define MSM_BUS_SLAVE_CORESIGHT 526
-+#define MSM_BUS_SLAVE_RIVA 527
-+#define MSM_BUS_SLAVE_SMI 528
-+#define MSM_BUS_MMSS_SLAVE_FAB_APPS 529
-+#define MSM_BUS_MMSS_SLAVE_FAB_APPS_1 530
-+#define MSM_BUS_SLAVE_MM_IMEM 531
-+#define MSM_BUS_SLAVE_CRYPTO 532
-+#define MSM_BUS_SLAVE_SPDM 533
-+#define MSM_BUS_SLAVE_RPM 534
-+#define MSM_BUS_SLAVE_RPM_MSG_RAM 535
-+#define MSM_BUS_SLAVE_MPM 536
-+#define MSM_BUS_SLAVE_PMIC1_SSBI1_A 537
-+#define MSM_BUS_SLAVE_PMIC1_SSBI1_B 538
-+#define MSM_BUS_SLAVE_PMIC1_SSBI1_C 539
-+#define MSM_BUS_SLAVE_PMIC2_SSBI2_A 540
-+#define MSM_BUS_SLAVE_PMIC2_SSBI2_B 541
-+#define MSM_BUS_SLAVE_GSBI1_UART 542
-+#define MSM_BUS_SLAVE_GSBI2_UART 543
-+#define MSM_BUS_SLAVE_GSBI3_UART 544
-+#define MSM_BUS_SLAVE_GSBI4_UART 545
-+#define MSM_BUS_SLAVE_GSBI5_UART 546
-+#define MSM_BUS_SLAVE_GSBI6_UART 547
-+#define MSM_BUS_SLAVE_GSBI7_UART 548
-+#define MSM_BUS_SLAVE_GSBI8_UART 549
-+#define MSM_BUS_SLAVE_GSBI9_UART 550
-+#define MSM_BUS_SLAVE_GSBI10_UART 551
-+#define MSM_BUS_SLAVE_GSBI11_UART 552
-+#define MSM_BUS_SLAVE_GSBI12_UART 553
-+#define MSM_BUS_SLAVE_GSBI1_QUP 554
-+#define MSM_BUS_SLAVE_GSBI2_QUP 555
-+#define MSM_BUS_SLAVE_GSBI3_QUP 556
-+#define MSM_BUS_SLAVE_GSBI4_QUP 557
-+#define MSM_BUS_SLAVE_GSBI5_QUP 558
-+#define MSM_BUS_SLAVE_GSBI6_QUP 559
-+#define MSM_BUS_SLAVE_GSBI7_QUP 560
-+#define MSM_BUS_SLAVE_GSBI8_QUP 561
-+#define MSM_BUS_SLAVE_GSBI9_QUP 562
-+#define MSM_BUS_SLAVE_GSBI10_QUP 563
-+#define MSM_BUS_SLAVE_GSBI11_QUP 564
-+#define MSM_BUS_SLAVE_GSBI12_QUP 565
-+#define MSM_BUS_SLAVE_EBI2_NAND 566
-+#define MSM_BUS_SLAVE_EBI2_CS0 567
-+#define MSM_BUS_SLAVE_EBI2_CS1 568
-+#define MSM_BUS_SLAVE_EBI2_CS2 569
-+#define MSM_BUS_SLAVE_EBI2_CS3 570
-+#define MSM_BUS_SLAVE_EBI2_CS4 571
-+#define MSM_BUS_SLAVE_EBI2_CS5 572
-+#define MSM_BUS_SLAVE_USB_FS1 573
-+#define MSM_BUS_SLAVE_USB_FS2 574
-+#define MSM_BUS_SLAVE_TSIF 575
-+#define MSM_BUS_SLAVE_MSM_TSSC 576
-+#define MSM_BUS_SLAVE_MSM_PDM 577
-+#define MSM_BUS_SLAVE_MSM_DIMEM 578
-+#define MSM_BUS_SLAVE_MSM_TCSR 579
-+#define MSM_BUS_SLAVE_MSM_PRNG 580
-+#define MSM_BUS_SLAVE_GSS 581
-+#define MSM_BUS_SLAVE_SATA 582
-+#define MSM_BUS_SLAVE_USB3 583
-+#define MSM_BUS_SLAVE_WCSS 584
-+#define MSM_BUS_SLAVE_OCIMEM 585
-+#define MSM_BUS_SLAVE_SNOC_OCMEM 586
-+#define MSM_BUS_SLAVE_SERVICE_SNOC 587
-+#define MSM_BUS_SLAVE_QDSS_STM 588
-+#define MSM_BUS_SLAVE_CAMERA_CFG 589
-+#define MSM_BUS_SLAVE_DISPLAY_CFG 590
-+#define MSM_BUS_SLAVE_OCMEM_CFG 591
-+#define MSM_BUS_SLAVE_CPR_CFG 592
-+#define MSM_BUS_SLAVE_CPR_XPU_CFG 593
-+#define MSM_BUS_SLAVE_MISC_CFG 594
-+#define MSM_BUS_SLAVE_MISC_XPU_CFG 595
-+#define MSM_BUS_SLAVE_VENUS_CFG 596
-+#define MSM_BUS_SLAVE_MISC_VENUS_CFG 597
-+#define MSM_BUS_SLAVE_GRAPHICS_3D_CFG 598
-+#define MSM_BUS_SLAVE_MMSS_CLK_CFG 599
-+#define MSM_BUS_SLAVE_MMSS_CLK_XPU_CFG 600
-+#define MSM_BUS_SLAVE_MNOC_MPU_CFG 601
-+#define MSM_BUS_SLAVE_ONOC_MPU_CFG 602
-+#define MSM_BUS_SLAVE_SERVICE_MNOC 603
-+#define MSM_BUS_SLAVE_OCMEM 604
-+#define MSM_BUS_SLAVE_SERVICE_ONOC 605
-+#define MSM_BUS_SLAVE_SDCC_1 606
-+#define MSM_BUS_SLAVE_SDCC_3 607
-+#define MSM_BUS_SLAVE_SDCC_2 608
-+#define MSM_BUS_SLAVE_SDCC_4 609
-+#define MSM_BUS_SLAVE_BAM_DMA 610
-+#define MSM_BUS_SLAVE_BLSP_2 611
-+#define MSM_BUS_SLAVE_USB_HSIC 612
-+#define MSM_BUS_SLAVE_BLSP_1 613
-+#define MSM_BUS_SLAVE_USB_HS 614
-+#define MSM_BUS_SLAVE_PDM 615
-+#define MSM_BUS_SLAVE_PERIPH_APU_CFG 616
-+#define MSM_BUS_SLAVE_PNOC_MPU_CFG 617
-+#define MSM_BUS_SLAVE_PRNG 618
-+#define MSM_BUS_SLAVE_SERVICE_PNOC 619
-+#define MSM_BUS_SLAVE_CLK_CTL 620
-+#define MSM_BUS_SLAVE_CNOC_MSS 621
-+#define MSM_BUS_SLAVE_SECURITY 622
-+#define MSM_BUS_SLAVE_TCSR 623
-+#define MSM_BUS_SLAVE_TLMM 624
-+#define MSM_BUS_SLAVE_CRYPTO_0_CFG 625
-+#define MSM_BUS_SLAVE_CRYPTO_1_CFG 626
-+#define MSM_BUS_SLAVE_IMEM_CFG 627
-+#define MSM_BUS_SLAVE_MESSAGE_RAM 628
-+#define MSM_BUS_SLAVE_BIMC_CFG 629
-+#define MSM_BUS_SLAVE_BOOT_ROM 630
-+#define MSM_BUS_SLAVE_CNOC_MNOC_MMSS_CFG 631
-+#define MSM_BUS_SLAVE_PMIC_ARB 632
-+#define MSM_BUS_SLAVE_SPDM_WRAPPER 633
-+#define MSM_BUS_SLAVE_DEHR_CFG 634
-+#define MSM_BUS_SLAVE_QDSS_CFG 635
-+#define MSM_BUS_SLAVE_RBCPR_CFG 636
-+#define MSM_BUS_SLAVE_RBCPR_QDSS_APU_CFG 637
-+#define MSM_BUS_SLAVE_SNOC_MPU_CFG 638
-+#define MSM_BUS_SLAVE_CNOC_ONOC_CFG 639
-+#define MSM_BUS_SLAVE_CNOC_MNOC_CFG 640
-+#define MSM_BUS_SLAVE_PNOC_CFG 641
-+#define MSM_BUS_SLAVE_SNOC_CFG 642
-+#define MSM_BUS_SLAVE_EBI1_DLL_CFG 643
-+#define MSM_BUS_SLAVE_PHY_APU_CFG 644
-+#define MSM_BUS_SLAVE_EBI1_PHY_CFG 645
-+#define MSM_BUS_SLAVE_SERVICE_CNOC 646
-+#define MSM_BUS_SLAVE_IPS_CFG 647
-+#define MSM_BUS_SLAVE_QPIC 648
-+#define MSM_BUS_SLAVE_DSI_CFG 649
-+#define MSM_BUS_SLAVE_UFS_CFG 650
-+#define MSM_BUS_SLAVE_RBCPR_CX_CFG 651
-+#define MSM_BUS_SLAVE_RBCPR_MX_CFG 652
-+#define MSM_BUS_SLAVE_PCIE_CFG 653
-+#define MSM_BUS_SLAVE_USB_PHYS_CFG 654
-+#define MSM_BUS_SLAVE_VIDEO_CAP_CFG 655
-+#define MSM_BUS_SLAVE_AVSYNC_CFG 656
-+#define MSM_BUS_SLAVE_CRYPTO_2_CFG 657
-+#define MSM_BUS_SLAVE_VPU_CFG 658
-+#define MSM_BUS_SLAVE_BCAST_CFG 659
-+#define MSM_BUS_SLAVE_KLM_CFG 660
-+#define MSM_BUS_SLAVE_GENI_IR_CFG 661
-+#define MSM_BUS_SLAVE_OCMEM_GFX 662
-+#define MSM_BUS_SLAVE_CATS_128 663
-+#define MSM_BUS_SLAVE_OCMEM_64 664
-+#define MSM_BUS_SLAVE_PCIE_0 665
-+#define MSM_BUS_SLAVE_PCIE_1 666
-+#define MSM_BUS_SLAVE_PCIE_0_CFG 667
-+#define MSM_BUS_SLAVE_PCIE_1_CFG 668
-+#define MSM_BUS_SLAVE_SRVC_MNOC 669
-+#define MSM_BUS_SLAVE_USB_HS2 670
-+#define MSM_BUS_SLAVE_AUDIO 671
-+#define MSM_BUS_SLAVE_TCU 672
-+#define MSM_BUS_SLAVE_APPSS 673
-+#define MSM_BUS_SLAVE_PCIE_PARF 674
-+#define MSM_BUS_SLAVE_USB3_PHY_CFG 675
-+#define MSM_BUS_SLAVE_IPA_CFG 676
-+#define MSM_BUS_SLAVE_A0NOC_SNOC 677
-+#define MSM_BUS_SLAVE_A1NOC_SNOC 678
-+#define MSM_BUS_SLAVE_A2NOC_SNOC 679
-+#define MSM_BUS_SLAVE_HMSS_L3 680
-+#define MSM_BUS_SLAVE_PIMEM_CFG 681
-+#define MSM_BUS_SLAVE_DCC_CFG 682
-+#define MSM_BUS_SLAVE_QDSS_RBCPR_APU_CFG 683
-+#define MSM_BUS_SLAVE_PCIE_2_CFG 684
-+#define MSM_BUS_SLAVE_PCIE20_AHB2PHY 685
-+#define MSM_BUS_SLAVE_A0NOC_CFG 686
-+#define MSM_BUS_SLAVE_A1NOC_CFG 687
-+#define MSM_BUS_SLAVE_A2NOC_CFG 688
-+#define MSM_BUS_SLAVE_A1NOC_MPU_CFG 689
-+#define MSM_BUS_SLAVE_A2NOC_MPU_CFG 690
-+#define MSM_BUS_SLAVE_A0NOC_SMMU_CFG 691
-+#define MSM_BUS_SLAVE_A1NOC_SMMU_CFG 692
-+#define MSM_BUS_SLAVE_A2NOC_SMMU_CFG 693
-+#define MSM_BUS_SLAVE_LPASS_SMMU_CFG 694
-+#define MSM_BUS_SLAVE_MMAGIC_CFG 695
-+#define MSM_BUS_SLAVE_VENUS_THROTTLE_CFG 696
-+#define MSM_BUS_SLAVE_SSC_CFG 697
-+#define MSM_BUS_SLAVE_DSA_CFG 698
-+#define MSM_BUS_SLAVE_DSA_MPU_CFG 699
-+#define MSM_BUS_SLAVE_DISPLAY_THROTTLE_CFG 700
-+#define MSM_BUS_SLAVE_SMMU_CPP_CFG 701
-+#define MSM_BUS_SLAVE_SMMU_JPEG_CFG 702
-+#define MSM_BUS_SLAVE_SMMU_MDP_CFG 703
-+#define MSM_BUS_SLAVE_SMMU_ROTATOR_CFG 704
-+#define MSM_BUS_SLAVE_SMMU_VENUS_CFG 705
-+#define MSM_BUS_SLAVE_SMMU_VFE_CFG 706
-+#define MSM_BUS_SLAVE_A0NOC_MPU_CFG 707
-+#define MSM_BUS_SLAVE_VMEM_CFG 708
-+#define MSM_BUS_SLAVE_CAMERA_THROTTLE_CFG 700
-+#define MSM_BUS_SLAVE_VMEM 709
-+#define MSM_BUS_SLAVE_AHB2PHY 710
-+#define MSM_BUS_SLAVE_PIMEM 711
-+#define MSM_BUS_SLAVE_SNOC_VMEM 712
-+#define MSM_BUS_SLAVE_PCIE_2 713
-+#define MSM_BUS_SLAVE_RBCPR_MX 714
-+#define MSM_BUS_SLAVE_RBCPR_CX 715
-+#define MSM_BUS_SLAVE_PRNG_APU_CFG 716
-+#define MSM_BUS_SLAVE_PERIPH_MPU_CFG 717
-+#define MSM_BUS_SLAVE_GCNT 718
-+#define MSM_BUS_SLAVE_ADSS_CFG 719
-+#define MSM_BUS_SLAVE_ADSS_VMIDMT_CFG 720
-+#define MSM_BUS_SLAVE_QHSS_APU_CFG 721
-+#define MSM_BUS_SLAVE_MDIO 722
-+#define MSM_BUS_SLAVE_FEPHY_CFG 723
-+#define MSM_BUS_SLAVE_SRIF 724
-+#define MSM_BUS_SLAVE_LAST 730
-+#define MSM_BUS_SLAVE_DDRC_CFG 731
-+#define MSM_BUS_SLAVE_DDRC_APU_CFG 732
-+#define MSM_BUS_SLAVE_MPU0_CFG 733
-+#define MSM_BUS_SLAVE_MPU1_CFG 734
-+#define MSM_BUS_SLAVE_MPU2_CFG 734
-+#define MSM_BUS_SLAVE_ESS_VMIDMT_CFG 735
-+#define MSM_BUS_SLAVE_ESS_APU_CFG 736
-+#define MSM_BUS_SLAVE_USB2_CFG 737
-+#define MSM_BUS_SLAVE_BLSP_CFG 738
-+#define MSM_BUS_SLAVE_QPIC_CFG 739
-+#define MSM_BUS_SLAVE_SDCC_CFG 740
-+#define MSM_BUS_SLAVE_WSS0_VMIDMT_CFG 741
-+#define MSM_BUS_SLAVE_WSS0_APU_CFG 742
-+#define MSM_BUS_SLAVE_WSS1_VMIDMT_CFG 743
-+#define MSM_BUS_SLAVE_WSS1_APU_CFG 744
-+#define MSM_BUS_SLAVE_SRVC_PCNOC 745
-+#define MSM_BUS_SLAVE_SNOC_DDRC 746
-+#define MSM_BUS_SLAVE_A7SS 747
-+#define MSM_BUS_SLAVE_WSS0_CFG 748
-+#define MSM_BUS_SLAVE_WSS1_CFG 749
-+#define MSM_BUS_SLAVE_PCIE 750
-+#define MSM_BUS_SLAVE_USB3_CFG 751
-+#define MSM_BUS_SLAVE_CRYPTO_CFG 752
-+#define MSM_BUS_SLAVE_ESS_CFG 753
-+#define MSM_BUS_SLAVE_SRVC_SNOC 754
-+
-+#define MSM_BUS_SYSTEM_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_SYSTEM_FPB
-+#define MSM_BUS_CPSS_FPB_SLAVE_SYSTEM MSM_BUS_SYSTEM_SLAVE_CPSS_FPB
-+
-+/*
-+ * ID's used in RPM messages
-+ */
-+#define ICBID_MASTER_APPSS_PROC 0
-+#define ICBID_MASTER_MSS_PROC 1
-+#define ICBID_MASTER_MNOC_BIMC 2
-+#define ICBID_MASTER_SNOC_BIMC 3
-+#define ICBID_MASTER_SNOC_BIMC_0 ICBID_MASTER_SNOC_BIMC
-+#define ICBID_MASTER_CNOC_MNOC_MMSS_CFG 4
-+#define ICBID_MASTER_CNOC_MNOC_CFG 5
-+#define ICBID_MASTER_GFX3D 6
-+#define ICBID_MASTER_JPEG 7
-+#define ICBID_MASTER_MDP 8
-+#define ICBID_MASTER_MDP0 ICBID_MASTER_MDP
-+#define ICBID_MASTER_MDPS ICBID_MASTER_MDP
-+#define ICBID_MASTER_VIDEO 9
-+#define ICBID_MASTER_VIDEO_P0 ICBID_MASTER_VIDEO
-+#define ICBID_MASTER_VIDEO_P1 10
-+#define ICBID_MASTER_VFE 11
-+#define ICBID_MASTER_CNOC_ONOC_CFG 12
-+#define ICBID_MASTER_JPEG_OCMEM 13
-+#define ICBID_MASTER_MDP_OCMEM 14
-+#define ICBID_MASTER_VIDEO_P0_OCMEM 15
-+#define ICBID_MASTER_VIDEO_P1_OCMEM 16
-+#define ICBID_MASTER_VFE_OCMEM 17
-+#define ICBID_MASTER_LPASS_AHB 18
-+#define ICBID_MASTER_QDSS_BAM 19
-+#define ICBID_MASTER_SNOC_CFG 20
-+#define ICBID_MASTER_BIMC_SNOC 21
-+#define ICBID_MASTER_CNOC_SNOC 22
-+#define ICBID_MASTER_CRYPTO 23
-+#define ICBID_MASTER_CRYPTO_CORE0 ICBID_MASTER_CRYPTO
-+#define ICBID_MASTER_CRYPTO_CORE1 24
-+#define ICBID_MASTER_LPASS_PROC 25
-+#define ICBID_MASTER_MSS 26
-+#define ICBID_MASTER_MSS_NAV 27
-+#define ICBID_MASTER_OCMEM_DMA 28
-+#define ICBID_MASTER_PNOC_SNOC 29
-+#define ICBID_MASTER_WCSS 30
-+#define ICBID_MASTER_QDSS_ETR 31
-+#define ICBID_MASTER_USB3 32
-+#define ICBID_MASTER_USB3_0 ICBID_MASTER_USB3
-+#define ICBID_MASTER_SDCC_1 33
-+#define ICBID_MASTER_SDCC_3 34
-+#define ICBID_MASTER_SDCC_2 35
-+#define ICBID_MASTER_SDCC_4 36
-+#define ICBID_MASTER_TSIF 37
-+#define ICBID_MASTER_BAM_DMA 38
-+#define ICBID_MASTER_BLSP_2 39
-+#define ICBID_MASTER_USB_HSIC 40
-+#define ICBID_MASTER_BLSP_1 41
-+#define ICBID_MASTER_USB_HS 42
-+#define ICBID_MASTER_USB_HS1 ICBID_MASTER_USB_HS
-+#define ICBID_MASTER_PNOC_CFG 43
-+#define ICBID_MASTER_SNOC_PNOC 44
-+#define ICBID_MASTER_RPM_INST 45
-+#define ICBID_MASTER_RPM_DATA 46
-+#define ICBID_MASTER_RPM_SYS 47
-+#define ICBID_MASTER_DEHR 48
-+#define ICBID_MASTER_QDSS_DAP 49
-+#define ICBID_MASTER_SPDM 50
-+#define ICBID_MASTER_TIC 51
-+#define ICBID_MASTER_SNOC_CNOC 52
-+#define ICBID_MASTER_GFX3D_OCMEM 53
-+#define ICBID_MASTER_GFX3D_GMEM ICBID_MASTER_GFX3D_OCMEM
-+#define ICBID_MASTER_OVIRT_SNOC 54
-+#define ICBID_MASTER_SNOC_OVIRT 55
-+#define ICBID_MASTER_SNOC_GVIRT ICBID_MASTER_SNOC_OVIRT
-+#define ICBID_MASTER_ONOC_OVIRT 56
-+#define ICBID_MASTER_USB_HS2 57
-+#define ICBID_MASTER_QPIC 58
-+#define ICBID_MASTER_IPA 59
-+#define ICBID_MASTER_DSI 60
-+#define ICBID_MASTER_MDP1 61
-+#define ICBID_MASTER_MDPE ICBID_MASTER_MDP1
-+#define ICBID_MASTER_VPU_PROC 62
-+#define ICBID_MASTER_VPU 63
-+#define ICBID_MASTER_VPU0 ICBID_MASTER_VPU
-+#define ICBID_MASTER_CRYPTO_CORE2 64
-+#define ICBID_MASTER_PCIE_0 65
-+#define ICBID_MASTER_PCIE_1 66
-+#define ICBID_MASTER_SATA 67
-+#define ICBID_MASTER_UFS 68
-+#define ICBID_MASTER_USB3_1 69
-+#define ICBID_MASTER_VIDEO_OCMEM 70
-+#define ICBID_MASTER_VPU1 71
-+#define ICBID_MASTER_VCAP 72
-+#define ICBID_MASTER_EMAC 73
-+#define ICBID_MASTER_BCAST 74
-+#define ICBID_MASTER_MMSS_PROC 75
-+#define ICBID_MASTER_SNOC_BIMC_1 76
-+#define ICBID_MASTER_SNOC_PCNOC 77
-+#define ICBID_MASTER_AUDIO 78
-+#define ICBID_MASTER_MM_INT_0 79
-+#define ICBID_MASTER_MM_INT_1 80
-+#define ICBID_MASTER_MM_INT_2 81
-+#define ICBID_MASTER_MM_INT_BIMC 82
-+#define ICBID_MASTER_MSS_INT 83
-+#define ICBID_MASTER_PCNOC_CFG 84
-+#define ICBID_MASTER_PCNOC_INT_0 85
-+#define ICBID_MASTER_PCNOC_INT_1 86
-+#define ICBID_MASTER_PCNOC_M_0 87
-+#define ICBID_MASTER_PCNOC_M_1 88
-+#define ICBID_MASTER_PCNOC_S_0 89
-+#define ICBID_MASTER_PCNOC_S_1 90
-+#define ICBID_MASTER_PCNOC_S_2 91
-+#define ICBID_MASTER_PCNOC_S_3 92
-+#define ICBID_MASTER_PCNOC_S_4 93
-+#define ICBID_MASTER_PCNOC_S_6 94
-+#define ICBID_MASTER_PCNOC_S_7 95
-+#define ICBID_MASTER_PCNOC_S_8 96
-+#define ICBID_MASTER_PCNOC_S_9 97
-+#define ICBID_MASTER_QDSS_INT 98
-+#define ICBID_MASTER_SNOC_INT_0 99
-+#define ICBID_MASTER_SNOC_INT_1 100
-+#define ICBID_MASTER_SNOC_INT_BIMC 101
-+#define ICBID_MASTER_TCU_0 102
-+#define ICBID_MASTER_TCU_1 103
-+#define ICBID_MASTER_BIMC_INT_0 104
-+#define ICBID_MASTER_BIMC_INT_1 105
-+#define ICBID_MASTER_CAMERA 106
-+#define ICBID_MASTER_RICA 107
-+#define ICBID_MASTER_PCNOC_S_5 129
-+#define ICBID_MASTER_PCNOC_INT_2 124
-+#define ICBID_MASTER_PCNOC_INT_3 125
-+#define ICBID_MASTER_PCNOC_INT_4 126
-+#define ICBID_MASTER_PCNOC_INT_5 127
-+#define ICBID_MASTER_PCNOC_INT_6 128
-+#define ICBID_MASTER_PCIE_2 119
-+#define ICBID_MASTER_MASTER_CNOC_A1NOC 116
-+#define ICBID_MASTER_A0NOC_SNOC 110
-+#define ICBID_MASTER_A1NOC_SNOC 111
-+#define ICBID_MASTER_A2NOC_SNOC 112
-+#define ICBID_MASTER_PNOC_A1NOC 117
-+#define ICBID_MASTER_ROTATOR 120
-+#define ICBID_MASTER_SNOC_VMEM 114
-+#define ICBID_MASTER_VENUS_VMEM 121
-+#define ICBID_MASTER_HMSS 118
-+#define ICBID_MASTER_BIMC_SNOC_1 109
-+#define ICBID_MASTER_CNOC_A1NOC 116
-+#define ICBID_MASTER_CPP 115
-+#define ICBID_MASTER_BLSP_BAM 130
-+#define ICBID_MASTER_USB2_BAM 131
-+#define ICBID_MASTER_ADSS_DMA0 132
-+#define ICBID_MASTER_ADSS_DMA1 133
-+#define ICBID_MASTER_ADSS_DMA2 134
-+#define ICBID_MASTER_ADSS_DMA3 135
-+#define ICBID_MASTER_QPIC_BAM 136
-+#define ICBID_MASTER_SDCC_BAM 137
-+#define ICBID_MASTER_DDRC_SNOC 138
-+#define ICBID_MASTER_WSS_0 139
-+#define ICBID_MASTER_WSS_1 140
-+#define ICBID_MASTER_ESS 141
-+#define ICBID_MASTER_PCIE 142
-+#define ICBID_MASTER_QDSS_BAMNDP 143
-+#define ICBID_MASTER_QDSS_SNOC_CFG 144
-+
-+#define ICBID_SLAVE_EBI1 0
-+#define ICBID_SLAVE_APPSS_L2 1
-+#define ICBID_SLAVE_BIMC_SNOC 2
-+#define ICBID_SLAVE_CAMERA_CFG 3
-+#define ICBID_SLAVE_DISPLAY_CFG 4
-+#define ICBID_SLAVE_OCMEM_CFG 5
-+#define ICBID_SLAVE_CPR_CFG 6
-+#define ICBID_SLAVE_CPR_XPU_CFG 7
-+#define ICBID_SLAVE_MISC_CFG 8
-+#define ICBID_SLAVE_MISC_XPU_CFG 9
-+#define ICBID_SLAVE_VENUS_CFG 10
-+#define ICBID_SLAVE_GFX3D_CFG 11
-+#define ICBID_SLAVE_MMSS_CLK_CFG 12
-+#define ICBID_SLAVE_MMSS_CLK_XPU_CFG 13
-+#define ICBID_SLAVE_MNOC_MPU_CFG 14
-+#define ICBID_SLAVE_ONOC_MPU_CFG 15
-+#define ICBID_SLAVE_MNOC_BIMC 16
-+#define ICBID_SLAVE_SERVICE_MNOC 17
-+#define ICBID_SLAVE_OCMEM 18
-+#define ICBID_SLAVE_GMEM ICBID_SLAVE_OCMEM
-+#define ICBID_SLAVE_SERVICE_ONOC 19
-+#define ICBID_SLAVE_APPSS 20
-+#define ICBID_SLAVE_LPASS 21
-+#define ICBID_SLAVE_USB3 22
-+#define ICBID_SLAVE_USB3_0 ICBID_SLAVE_USB3
-+#define ICBID_SLAVE_WCSS 23
-+#define ICBID_SLAVE_SNOC_BIMC 24
-+#define ICBID_SLAVE_SNOC_BIMC_0 ICBID_SLAVE_SNOC_BIMC
-+#define ICBID_SLAVE_SNOC_CNOC 25
-+#define ICBID_SLAVE_IMEM 26
-+#define ICBID_SLAVE_OCIMEM ICBID_SLAVE_IMEM
-+#define ICBID_SLAVE_SNOC_OVIRT 27
-+#define ICBID_SLAVE_SNOC_GVIRT ICBID_SLAVE_SNOC_OVIRT
-+#define ICBID_SLAVE_SNOC_PNOC 28
-+#define ICBID_SLAVE_SNOC_PCNOC ICBID_SLAVE_SNOC_PNOC
-+#define ICBID_SLAVE_SERVICE_SNOC 29
-+#define ICBID_SLAVE_QDSS_STM 30
-+#define ICBID_SLAVE_SDCC_1 31
-+#define ICBID_SLAVE_SDCC_3 32
-+#define ICBID_SLAVE_SDCC_2 33
-+#define ICBID_SLAVE_SDCC_4 34
-+#define ICBID_SLAVE_TSIF 35
-+#define ICBID_SLAVE_BAM_DMA 36
-+#define ICBID_SLAVE_BLSP_2 37
-+#define ICBID_SLAVE_USB_HSIC 38
-+#define ICBID_SLAVE_BLSP_1 39
-+#define ICBID_SLAVE_USB_HS 40
-+#define ICBID_SLAVE_USB_HS1 ICBID_SLAVE_USB_HS
-+#define ICBID_SLAVE_PDM 41
-+#define ICBID_SLAVE_PERIPH_APU_CFG 42
-+#define ICBID_SLAVE_PNOC_MPU_CFG 43
-+#define ICBID_SLAVE_PRNG 44
-+#define ICBID_SLAVE_PNOC_SNOC 45
-+#define ICBID_SLAVE_PCNOC_SNOC ICBID_SLAVE_PNOC_SNOC
-+#define ICBID_SLAVE_SERVICE_PNOC 46
-+#define ICBID_SLAVE_CLK_CTL 47
-+#define ICBID_SLAVE_CNOC_MSS 48
-+#define ICBID_SLAVE_PCNOC_MSS ICBID_SLAVE_CNOC_MSS
-+#define ICBID_SLAVE_SECURITY 49
-+#define ICBID_SLAVE_TCSR 50
-+#define ICBID_SLAVE_TLMM 51
-+#define ICBID_SLAVE_CRYPTO_0_CFG 52
-+#define ICBID_SLAVE_CRYPTO_1_CFG 53
-+#define ICBID_SLAVE_IMEM_CFG 54
-+#define ICBID_SLAVE_MESSAGE_RAM 55
-+#define ICBID_SLAVE_BIMC_CFG 56
-+#define ICBID_SLAVE_BOOT_ROM 57
-+#define ICBID_SLAVE_CNOC_MNOC_MMSS_CFG 58
-+#define ICBID_SLAVE_PMIC_ARB 59
-+#define ICBID_SLAVE_SPDM_WRAPPER 60
-+#define ICBID_SLAVE_DEHR_CFG 61
-+#define ICBID_SLAVE_MPM 62
-+#define ICBID_SLAVE_QDSS_CFG 63
-+#define ICBID_SLAVE_RBCPR_CFG 64
-+#define ICBID_SLAVE_RBCPR_CX_CFG ICBID_SLAVE_RBCPR_CFG
-+#define ICBID_SLAVE_RBCPR_QDSS_APU_CFG 65
-+#define ICBID_SLAVE_CNOC_MNOC_CFG 66
-+#define ICBID_SLAVE_SNOC_MPU_CFG 67
-+#define ICBID_SLAVE_CNOC_ONOC_CFG 68
-+#define ICBID_SLAVE_PNOC_CFG 69
-+#define ICBID_SLAVE_SNOC_CFG 70
-+#define ICBID_SLAVE_EBI1_DLL_CFG 71
-+#define ICBID_SLAVE_PHY_APU_CFG 72
-+#define ICBID_SLAVE_EBI1_PHY_CFG 73
-+#define ICBID_SLAVE_RPM 74
-+#define ICBID_SLAVE_CNOC_SNOC 75
-+#define ICBID_SLAVE_SERVICE_CNOC 76
-+#define ICBID_SLAVE_OVIRT_SNOC 77
-+#define ICBID_SLAVE_OVIRT_OCMEM 78
-+#define ICBID_SLAVE_USB_HS2 79
-+#define ICBID_SLAVE_QPIC 80
-+#define ICBID_SLAVE_IPS_CFG 81
-+#define ICBID_SLAVE_DSI_CFG 82
-+#define ICBID_SLAVE_USB3_1 83
-+#define ICBID_SLAVE_PCIE_0 84
-+#define ICBID_SLAVE_PCIE_1 85
-+#define ICBID_SLAVE_PSS_SMMU_CFG 86
-+#define ICBID_SLAVE_CRYPTO_2_CFG 87
-+#define ICBID_SLAVE_PCIE_0_CFG 88
-+#define ICBID_SLAVE_PCIE_1_CFG 89
-+#define ICBID_SLAVE_SATA_CFG 90
-+#define ICBID_SLAVE_SPSS_GENI_IR 91
-+#define ICBID_SLAVE_UFS_CFG 92
-+#define ICBID_SLAVE_AVSYNC_CFG 93
-+#define ICBID_SLAVE_VPU_CFG 94
-+#define ICBID_SLAVE_USB_PHY_CFG 95
-+#define ICBID_SLAVE_RBCPR_MX_CFG 96
-+#define ICBID_SLAVE_PCIE_PARF 97
-+#define ICBID_SLAVE_VCAP_CFG 98
-+#define ICBID_SLAVE_EMAC_CFG 99
-+#define ICBID_SLAVE_BCAST_CFG 100
-+#define ICBID_SLAVE_KLM_CFG 101
-+#define ICBID_SLAVE_DISPLAY_PWM 102
-+#define ICBID_SLAVE_GENI 103
-+#define ICBID_SLAVE_SNOC_BIMC_1 104
-+#define ICBID_SLAVE_AUDIO 105
-+#define ICBID_SLAVE_CATS_0 106
-+#define ICBID_SLAVE_CATS_1 107
-+#define ICBID_SLAVE_MM_INT_0 108
-+#define ICBID_SLAVE_MM_INT_1 109
-+#define ICBID_SLAVE_MM_INT_2 110
-+#define ICBID_SLAVE_MM_INT_BIMC 111
-+#define ICBID_SLAVE_MMU_MODEM_XPU_CFG 112
-+#define ICBID_SLAVE_MSS_INT 113
-+#define ICBID_SLAVE_PCNOC_INT_0 114
-+#define ICBID_SLAVE_PCNOC_INT_1 115
-+#define ICBID_SLAVE_PCNOC_M_0 116
-+#define ICBID_SLAVE_PCNOC_M_1 117
-+#define ICBID_SLAVE_PCNOC_S_0 118
-+#define ICBID_SLAVE_PCNOC_S_1 119
-+#define ICBID_SLAVE_PCNOC_S_2 120
-+#define ICBID_SLAVE_PCNOC_S_3 121
-+#define ICBID_SLAVE_PCNOC_S_4 122
-+#define ICBID_SLAVE_PCNOC_S_6 123
-+#define ICBID_SLAVE_PCNOC_S_7 124
-+#define ICBID_SLAVE_PCNOC_S_8 125
-+#define ICBID_SLAVE_PCNOC_S_9 126
-+#define ICBID_SLAVE_PRNG_XPU_CFG 127
-+#define ICBID_SLAVE_QDSS_INT 128
-+#define ICBID_SLAVE_RPM_XPU_CFG 129
-+#define ICBID_SLAVE_SNOC_INT_0 130
-+#define ICBID_SLAVE_SNOC_INT_1 131
-+#define ICBID_SLAVE_SNOC_INT_BIMC 132
-+#define ICBID_SLAVE_TCU 133
-+#define ICBID_SLAVE_BIMC_INT_0 134
-+#define ICBID_SLAVE_BIMC_INT_1 135
-+#define ICBID_SLAVE_RICA_CFG 136
-+#define ICBID_SLAVE_PCNOC_S_5 189
-+#define ICBID_SLAVE_PCNOC_S_7 124
-+#define ICBID_SLAVE_PCNOC_INT_2 184
-+#define ICBID_SLAVE_PCNOC_INT_3 185
-+#define ICBID_SLAVE_PCNOC_INT_4 186
-+#define ICBID_SLAVE_PCNOC_INT_5 187
-+#define ICBID_SLAVE_PCNOC_INT_6 188
-+#define ICBID_SLAVE_USB3_PHY_CFG 182
-+#define ICBID_SLAVE_IPA_CFG 183
-+
-+#define ICBID_SLAVE_A0NOC_SNOC 141
-+#define ICBID_SLAVE_A1NOC_SNOC 142
-+#define ICBID_SLAVE_A2NOC_SNOC 143
-+#define ICBID_SLAVE_BIMC_SNOC_1 138
-+#define ICBID_SLAVE_PIMEM 167
-+#define ICBID_SLAVE_PIMEM_CFG 168
-+#define ICBID_SLAVE_DCC_CFG 155
-+#define ICBID_SLAVE_QDSS_RBCPR_APU_CFG 168
-+#define ICBID_SLAVE_A0NOC_CFG 144
-+#define ICBID_SLAVE_PCIE_2_CFG 165
-+#define ICBID_SLAVE_PCIE20_AHB2PHY 163
-+#define ICBID_SLAVE_PCIE_2 164
-+#define ICBID_SLAVE_A1NOC_CFG 147
-+#define ICBID_SLAVE_A1NOC_MPU_CFG 148
-+#define ICBID_SLAVE_A1NOC_SMMU_CFG 149
-+#define ICBID_SLAVE_A2NOC_CFG 150
-+#define ICBID_SLAVE_A2NOC_MPU_CFG 151
-+#define ICBID_SLAVE_A2NOC_SMMU_CFG 152
-+#define ICBID_SLAVE_AHB2PHY 153
-+#define ICBID_SLAVE_HMSS_L3 161
-+#define ICBID_SLAVE_LPASS_SMMU_CFG 161
-+#define ICBID_SLAVE_MMAGIC_CFG 162
-+#define ICBID_SLAVE_SSC_CFG 177
-+#define ICBID_SLAVE_VENUS_THROTTLE_CFG 178
-+#define ICBID_SLAVE_DISPLAY_THROTTLE_CFG 156
-+#define ICBID_SLAVE_CAMERA_THROTTLE_CFG 154
-+#define ICBID_SLAVE_DSA_CFG 157
-+#define ICBID_SLAVE_DSA_MPU_CFG 158
-+#define ICBID_SLAVE_SMMU_CPP_CFG 171
-+#define ICBID_SLAVE_SMMU_JPEG_CFG 172
-+#define ICBID_SLAVE_SMMU_MDP_CFG 173
-+#define ICBID_SLAVE_SMMU_ROTATOR_CFG 174
-+#define ICBID_SLAVE_SMMU_VENUS_CFG 175
-+#define ICBID_SLAVE_SMMU_VFE_CFG 176
-+#define ICBID_SLAVE_A0NOC_MPU_CFG 145
-+#define ICBID_SLAVE_A0NOC_SMMU_CFG 146
-+#define ICBID_SLAVE_VMEM_CFG 180
-+#define ICBID_SLAVE_VMEM 179
-+#define ICBID_SLAVE_PNOC_A1NOC 139
-+#define ICBID_SLAVE_SNOC_VMEM 140
-+#define ICBID_SLAVE_RBCPR_MX 170
-+#define ICBID_SLAVE_RBCPR_CX 169
-+#define ICBID_SLAVE_PRNG_APU_CFG 190
-+#define ICBID_SLAVE_PERIPH_MPU_CFG 191
-+#define ICBID_SLAVE_GCNT 192
-+#define ICBID_SLAVE_ADSS_CFG 193
-+#define ICBID_SLAVE_ADSS_APU 194
-+#define ICBID_SLAVE_ADSS_VMIDMT_CFG 195
-+#define ICBID_SLAVE_QHSS_APU_CFG 196
-+#define ICBID_SLAVE_MDIO 197
-+#define ICBID_SLAVE_FEPHY_CFG 198
-+#define ICBID_SLAVE_SRIF 199
-+#define ICBID_SLAVE_DDRC_CFG 200
-+#define ICBID_SLAVE_DDRC_APU_CFG 201
-+#define ICBID_SLAVE_DDRC_MPU0_CFG 202
-+#define ICBID_SLAVE_DDRC_MPU1_CFG 203
-+#define ICBID_SLAVE_DDRC_MPU2_CFG 210
-+#define ICBID_SLAVE_ESS_VMIDMT_CFG 211
-+#define ICBID_SLAVE_ESS_APU_CFG 212
-+#define ICBID_SLAVE_USB2_CFG 213
-+#define ICBID_SLAVE_BLSP_CFG 214
-+#define ICBID_SLAVE_QPIC_CFG 215
-+#define ICBID_SLAVE_SDCC_CFG 216
-+#define ICBID_SLAVE_WSS0_VMIDMT_CFG 217
-+#define ICBID_SLAVE_WSS0_APU_CFG 218
-+#define ICBID_SLAVE_WSS1_VMIDMT_CFG 219
-+#define ICBID_SLAVE_WSS1_APU_CFG 220
-+#define ICBID_SLAVE_SRVC_PCNOC 221
-+#define ICBID_SLAVE_SNOC_DDRC 222
-+#define ICBID_SLAVE_A7SS 223
-+#define ICBID_SLAVE_WSS0_CFG 224
-+#define ICBID_SLAVE_WSS1_CFG 225
-+#define ICBID_SLAVE_PCIE 226
-+#define ICBID_SLAVE_USB3_CFG 227
-+#define ICBID_SLAVE_CRYPTO_CFG 228
-+#define ICBID_SLAVE_ESS_CFG 229
-+#define ICBID_SLAVE_SRVC_SNOC 230
-+#endif
---- /dev/null
-+++ b/include/dt-bindings/msm/msm-bus-rule-ops.h
-@@ -0,0 +1,32 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __MSM_BUS_RULE_OPS_H
-+#define __MSM_BUS_RULE_OPS_H
-+
-+#define FLD_IB 0
-+#define FLD_AB 1
-+#define FLD_CLK 2
-+
-+#define OP_LE 0
-+#define OP_LT 1
-+#define OP_GE 2
-+#define OP_GT 3
-+#define OP_NOOP 4
-+
-+#define RULE_STATE_NOT_APPLIED 0
-+#define RULE_STATE_APPLIED 1
-+
-+#define THROTTLE_ON 0
-+#define THROTTLE_OFF 1
-+
-+#endif
---- /dev/null
-+++ b/drivers/bus/msm_bus/Kconfig
-@@ -0,0 +1,19 @@
-+config BUS_TOPOLOGY_ADHOC
-+ bool "ad-hoc bus scaling topology"
-+ depends on ARCH_QCOM
-+ default n
-+ help
-+ This option enables a driver that can handle adhoc bus topologies.
-+ Adhoc bus topology driver allows one to many connections and maintains
-+ directionality of connections by explicitly listing device connections
-+ thus avoiding illegal routes.
-+
-+config MSM_BUS_SCALING
-+ bool "Bus scaling driver"
-+ depends on BUS_TOPOLOGY_ADHOC
-+ default n
-+ help
-+ This option enables bus scaling on MSM devices. Bus scaling
-+ allows devices to request the clocks be set to rates sufficient
-+ for the active devices needs without keeping the clocks at max
-+ frequency when a slower speed is sufficient.
---- /dev/null
-+++ b/drivers/bus/msm_bus/Makefile
-@@ -0,0 +1,12 @@
-+#
-+# Makefile for msm-bus driver specific files
-+#
-+obj-y += msm_bus_bimc.o msm_bus_noc.o msm_bus_core.o msm_bus_client_api.o \
-+ msm_bus_id.o
-+obj-$(CONFIG_OF) += msm_bus_of.o
-+
-+obj-y += msm_bus_fabric_adhoc.o msm_bus_arb_adhoc.o msm_bus_rules.o
-+obj-$(CONFIG_OF) += msm_bus_of_adhoc.o
-+obj-$(CONFIG_CORESIGHT) += msm_buspm_coresight_adhoc.o
-+
-+obj-$(CONFIG_DEBUG_FS) += msm_bus_dbg.o
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm-bus-board.h
-@@ -0,0 +1,198 @@
-+/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef __ASM_ARCH_MSM_BUS_BOARD_H
-+#define __ASM_ARCH_MSM_BUS_BOARD_H
-+
-+#include <linux/types.h>
-+#include <linux/input.h>
-+
-+enum context {
-+ DUAL_CTX,
-+ ACTIVE_CTX,
-+ NUM_CTX
-+};
-+
-+struct msm_bus_fabric_registration {
-+ unsigned int id;
-+ const char *name;
-+ struct msm_bus_node_info *info;
-+ unsigned int len;
-+ int ahb;
-+ const char *fabclk[NUM_CTX];
-+ const char *iface_clk;
-+ unsigned int offset;
-+ unsigned int haltid;
-+ unsigned int rpm_enabled;
-+ unsigned int nmasters;
-+ unsigned int nslaves;
-+ unsigned int ntieredslaves;
-+ bool il_flag;
-+ const struct msm_bus_board_algorithm *board_algo;
-+ int hw_sel;
-+ void *hw_data;
-+ uint32_t qos_freq;
-+ uint32_t qos_baseoffset;
-+ u64 nr_lim_thresh;
-+ uint32_t eff_fact;
-+ uint32_t qos_delta;
-+ bool virt;
-+};
-+
-+struct msm_bus_device_node_registration {
-+ struct msm_bus_node_device_type *info;
-+ unsigned int num_devices;
-+ bool virt;
-+};
-+
-+enum msm_bus_bw_tier_type {
-+ MSM_BUS_BW_TIER1 = 1,
-+ MSM_BUS_BW_TIER2,
-+ MSM_BUS_BW_COUNT,
-+ MSM_BUS_BW_SIZE = 0x7FFFFFFF,
-+};
-+
-+struct msm_bus_halt_vector {
-+ uint32_t haltval;
-+ uint32_t haltmask;
-+};
-+
-+extern struct msm_bus_fabric_registration msm_bus_apps_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_sys_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_mm_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_sys_fpb_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_cpss_fpb_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_def_fab_pdata;
-+
-+extern struct msm_bus_fabric_registration msm_bus_8960_apps_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8960_sys_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8960_mm_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8960_sg_mm_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8960_sys_fpb_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8960_cpss_fpb_pdata;
-+
-+extern struct msm_bus_fabric_registration msm_bus_8064_apps_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8064_sys_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8064_mm_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8064_sys_fpb_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8064_cpss_fpb_pdata;
-+
-+extern struct msm_bus_fabric_registration msm_bus_9615_sys_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_9615_def_fab_pdata;
-+
-+extern struct msm_bus_fabric_registration msm_bus_8930_apps_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8930_sys_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8930_mm_fabric_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8930_sys_fpb_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8930_cpss_fpb_pdata;
-+
-+extern struct msm_bus_fabric_registration msm_bus_8974_sys_noc_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8974_mmss_noc_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8974_bimc_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8974_ocmem_noc_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8974_periph_noc_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8974_config_noc_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_8974_ocmem_vnoc_pdata;
-+
-+extern struct msm_bus_fabric_registration msm_bus_9625_sys_noc_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_9625_bimc_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_9625_periph_noc_pdata;
-+extern struct msm_bus_fabric_registration msm_bus_9625_config_noc_pdata;
-+
-+extern int msm_bus_device_match_adhoc(struct device *dev, void *id);
-+
-+void msm_bus_rpm_set_mt_mask(void);
-+int msm_bus_board_rpm_get_il_ids(uint16_t *id);
-+int msm_bus_board_get_iid(int id);
-+
-+#define NFAB_MSM8226 6
-+#define NFAB_MSM8610 5
-+
-+/*
-+ * These macros specify the convention followed for allocating
-+ * ids to fabrics, masters and slaves for 8x60.
-+ *
-+ * A node can be identified as a master/slave/fabric by using
-+ * these ids.
-+ */
-+#define FABRIC_ID_KEY 1024
-+#define SLAVE_ID_KEY ((FABRIC_ID_KEY) >> 1)
-+#define MAX_FAB_KEY 7168 /* OR(All fabric ids) */
-+#define INT_NODE_START 10000
-+
-+#define GET_FABID(id) ((id) & MAX_FAB_KEY)
-+
-+#define NODE_ID(id) ((id) & (FABRIC_ID_KEY - 1))
-+#define IS_SLAVE(id) ((NODE_ID(id)) >= SLAVE_ID_KEY ? 1 : 0)
-+#define CHECK_ID(iid, id) (((iid & id) != id) ? -ENXIO : iid)
-+
-+/*
-+ * The following macros are used to format the data for port halt
-+ * and unhalt requests.
-+ */
-+#define MSM_BUS_CLK_HALT 0x1
-+#define MSM_BUS_CLK_HALT_MASK 0x1
-+#define MSM_BUS_CLK_HALT_FIELDSIZE 0x1
-+#define MSM_BUS_CLK_UNHALT 0x0
-+
-+#define MSM_BUS_MASTER_SHIFT(master, fieldsize) \
-+ ((master) * (fieldsize))
-+
-+#define MSM_BUS_SET_BITFIELD(word, fieldmask, fieldvalue) \
-+ { \
-+ (word) &= ~(fieldmask); \
-+ (word) |= (fieldvalue); \
-+ }
-+
-+
-+#define MSM_BUS_MASTER_HALT(u32haltmask, u32haltval, master) \
-+ MSM_BUS_SET_BITFIELD(u32haltmask, \
-+ MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
-+ MSM_BUS_CLK_HALT_FIELDSIZE), \
-+ MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
-+ MSM_BUS_CLK_HALT_FIELDSIZE))\
-+ MSM_BUS_SET_BITFIELD(u32haltval, \
-+ MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
-+ MSM_BUS_CLK_HALT_FIELDSIZE), \
-+ MSM_BUS_CLK_HALT<<MSM_BUS_MASTER_SHIFT((master),\
-+ MSM_BUS_CLK_HALT_FIELDSIZE))\
-+
-+#define MSM_BUS_MASTER_UNHALT(u32haltmask, u32haltval, master) \
-+ MSM_BUS_SET_BITFIELD(u32haltmask, \
-+ MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
-+ MSM_BUS_CLK_HALT_FIELDSIZE), \
-+ MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
-+ MSM_BUS_CLK_HALT_FIELDSIZE))\
-+ MSM_BUS_SET_BITFIELD(u32haltval, \
-+ MSM_BUS_CLK_HALT_MASK<<MSM_BUS_MASTER_SHIFT((master),\
-+ MSM_BUS_CLK_HALT_FIELDSIZE), \
-+ MSM_BUS_CLK_UNHALT<<MSM_BUS_MASTER_SHIFT((master),\
-+ MSM_BUS_CLK_HALT_FIELDSIZE))\
-+
-+#define RPM_BUS_SLAVE_REQ 0x766c7362
-+#define RPM_BUS_MASTER_REQ 0x73616d62
-+
-+enum msm_bus_rpm_slave_field_type {
-+ RPM_SLAVE_FIELD_BW = 0x00007762,
-+};
-+
-+enum msm_bus_rpm_mas_field_type {
-+ RPM_MASTER_FIELD_BW = 0x00007762,
-+ RPM_MASTER_FIELD_BW_T0 = 0x30747762,
-+ RPM_MASTER_FIELD_BW_T1 = 0x31747762,
-+ RPM_MASTER_FIELD_BW_T2 = 0x32747762,
-+};
-+
-+#include <dt-bindings/msm/msm-bus-ids.h>
-+
-+
-+#endif /*__ASM_ARCH_MSM_BUS_BOARD_H */
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm-bus.h
-@@ -0,0 +1,139 @@
-+/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef _ARCH_ARM_MACH_MSM_BUS_H
-+#define _ARCH_ARM_MACH_MSM_BUS_H
-+
-+#include <linux/types.h>
-+#include <linux/input.h>
-+#include <linux/platform_device.h>
-+
-+/*
-+ * Macros for clients to convert their data to ib and ab
-+ * Ws : Time window over which to transfer the data in SECONDS
-+ * Bs : Size of the data block in bytes
-+ * Per : Recurrence period
-+ * Tb : Throughput bandwidth to prevent stalling
-+ * R : Ratio of actual bandwidth used to Tb
-+ * Ib : Instantaneous bandwidth
-+ * Ab : Arbitrated bandwidth
-+ *
-+ * IB_RECURRBLOCK and AB_RECURRBLOCK:
-+ * These are used if the requirement is to transfer a
-+ * recurring block of data over a known time window.
-+ *
-+ * IB_THROUGHPUTBW and AB_THROUGHPUTBW:
-+ * These are used for CPU style masters. Here the requirement
-+ * is to have minimum throughput bandwidth available to avoid
-+ * stalling.
-+ */
-+#define IB_RECURRBLOCK(Ws, Bs) ((Ws) == 0 ? 0 : ((Bs)/(Ws)))
-+#define AB_RECURRBLOCK(Ws, Per) ((Ws) == 0 ? 0 : ((Bs)/(Per)))
-+#define IB_THROUGHPUTBW(Tb) (Tb)
-+#define AB_THROUGHPUTBW(Tb, R) ((Tb) * (R))
-+
-+struct msm_bus_vectors {
-+ int src; /* Master */
-+ int dst; /* Slave */
-+ uint64_t ab; /* Arbitrated bandwidth */
-+ uint64_t ib; /* Instantaneous bandwidth */
-+};
-+
-+struct msm_bus_paths {
-+ int num_paths;
-+ struct msm_bus_vectors *vectors;
-+};
-+
-+struct msm_bus_scale_pdata {
-+ struct msm_bus_paths *usecase;
-+ int num_usecases;
-+ const char *name;
-+ /*
-+ * If the active_only flag is set to 1, the BW request is applied
-+ * only when at least one CPU is active (powered on). If the flag
-+ * is set to 0, then the BW request is always applied irrespective
-+ * of the CPU state.
-+ */
-+ unsigned int active_only;
-+};
-+
-+/* Scaling APIs */
-+
-+/*
-+ * This function returns a handle to the client. This should be used to
-+ * call msm_bus_scale_client_update_request.
-+ * The function returns 0 if bus driver is unable to register a client
-+ */
-+
-+#if (defined(CONFIG_MSM_BUS_SCALING) || defined(CONFIG_BUS_TOPOLOGY_ADHOC))
-+int __init msm_bus_fabric_init_driver(void);
-+uint32_t msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata);
-+int msm_bus_scale_client_update_request(uint32_t cl, unsigned int index);
-+void msm_bus_scale_unregister_client(uint32_t cl);
-+/* AXI Port configuration APIs */
-+int msm_bus_axi_porthalt(int master_port);
-+int msm_bus_axi_portunhalt(int master_port);
-+
-+#else
-+static inline int __init msm_bus_fabric_init_driver(void) { return 0; }
-+
-+static inline uint32_t
-+msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata)
-+{
-+ return 1;
-+}
-+
-+static inline int
-+msm_bus_scale_client_update_request(uint32_t cl, unsigned int index)
-+{
-+ return 0;
-+}
-+
-+static inline void
-+msm_bus_scale_unregister_client(uint32_t cl)
-+{
-+}
-+
-+static inline int msm_bus_axi_porthalt(int master_port)
-+{
-+ return 0;
-+}
-+
-+static inline int msm_bus_axi_portunhalt(int master_port)
-+{
-+ return 0;
-+}
-+#endif
-+
-+#if defined(CONFIG_OF) && defined(CONFIG_MSM_BUS_SCALING)
-+struct msm_bus_scale_pdata *msm_bus_pdata_from_node(
-+ struct platform_device *pdev, struct device_node *of_node);
-+struct msm_bus_scale_pdata *msm_bus_cl_get_pdata(struct platform_device *pdev);
-+void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata);
-+#else
-+static inline struct msm_bus_scale_pdata
-+*msm_bus_cl_get_pdata(struct platform_device *pdev)
-+{
-+ return NULL;
-+}
-+
-+static inline struct msm_bus_scale_pdata *msm_bus_pdata_from_node(
-+ struct platform_device *pdev, struct device_node *of_node)
-+{
-+ return NULL;
-+}
-+
-+static inline void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata)
-+{
-+}
-+#endif
-+#endif /*_ARCH_ARM_MACH_MSM_BUS_H*/
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_adhoc.h
-@@ -0,0 +1,141 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef _ARCH_ARM_MACH_MSM_BUS_ADHOC_H
-+#define _ARCH_ARM_MACH_MSM_BUS_ADHOC_H
-+
-+#include <linux/types.h>
-+#include <linux/device.h>
-+#include "msm-bus-board.h"
-+#include "msm-bus.h"
-+#include "msm_bus_rules.h"
-+#include "msm_bus_core.h"
-+
-+struct msm_bus_node_device_type;
-+struct link_node {
-+ uint64_t lnode_ib[NUM_CTX];
-+ uint64_t lnode_ab[NUM_CTX];
-+ int next;
-+ struct device *next_dev;
-+ struct list_head link;
-+ uint32_t in_use;
-+};
-+
-+/* New types introduced for adhoc topology */
-+struct msm_bus_noc_ops {
-+ int (*qos_init)(struct msm_bus_node_device_type *dev,
-+ void __iomem *qos_base, uint32_t qos_off,
-+ uint32_t qos_delta, uint32_t qos_freq);
-+ int (*set_bw)(struct msm_bus_node_device_type *dev,
-+ void __iomem *qos_base, uint32_t qos_off,
-+ uint32_t qos_delta, uint32_t qos_freq);
-+ int (*limit_mport)(struct msm_bus_node_device_type *dev,
-+ void __iomem *qos_base, uint32_t qos_off,
-+ uint32_t qos_delta, uint32_t qos_freq, bool enable_lim,
-+ uint64_t lim_bw);
-+ bool (*update_bw_reg)(int mode);
-+};
-+
-+struct nodebw {
-+ uint64_t ab[NUM_CTX];
-+ bool dirty;
-+};
-+
-+struct msm_bus_fab_device_type {
-+ void __iomem *qos_base;
-+ phys_addr_t pqos_base;
-+ size_t qos_range;
-+ uint32_t base_offset;
-+ uint32_t qos_freq;
-+ uint32_t qos_off;
-+ uint32_t util_fact;
-+ uint32_t vrail_comp;
-+ struct msm_bus_noc_ops noc_ops;
-+ enum msm_bus_hw_sel bus_type;
-+ bool bypass_qos_prg;
-+};
-+
-+struct qos_params_type {
-+ int mode;
-+ unsigned int prio_lvl;
-+ unsigned int prio_rd;
-+ unsigned int prio_wr;
-+ unsigned int prio1;
-+ unsigned int prio0;
-+ unsigned int gp;
-+ unsigned int thmp;
-+ unsigned int ws;
-+ int cur_mode;
-+ u64 bw_buffer;
-+};
-+
-+struct msm_bus_node_info_type {
-+ const char *name;
-+ unsigned int id;
-+ int mas_rpm_id;
-+ int slv_rpm_id;
-+ int num_ports;
-+ int num_qports;
-+ int *qport;
-+ struct qos_params_type qos_params;
-+ unsigned int num_connections;
-+ unsigned int num_blist;
-+ bool is_fab_dev;
-+ bool virt_dev;
-+ bool is_traversed;
-+ unsigned int *connections;
-+ unsigned int *black_listed_connections;
-+ struct device **dev_connections;
-+ struct device **black_connections;
-+ unsigned int bus_device_id;
-+ struct device *bus_device;
-+ unsigned int buswidth;
-+ struct rule_update_path_info rule;
-+ uint64_t lim_bw;
-+ uint32_t util_fact;
-+ uint32_t vrail_comp;
-+};
-+
-+struct msm_bus_node_device_type {
-+ struct msm_bus_node_info_type *node_info;
-+ struct msm_bus_fab_device_type *fabdev;
-+ int num_lnodes;
-+ struct link_node *lnode_list;
-+ uint64_t cur_clk_hz[NUM_CTX];
-+ struct nodebw node_ab;
-+ struct list_head link;
-+ unsigned int ap_owned;
-+ struct nodeclk clk[NUM_CTX];
-+ struct nodeclk qos_clk;
-+};
-+
-+int msm_bus_enable_limiter(struct msm_bus_node_device_type *nodedev,
-+ bool throttle_en, uint64_t lim_bw);
-+int msm_bus_update_clks(struct msm_bus_node_device_type *nodedev,
-+ int ctx, int **dirty_nodes, int *num_dirty);
-+int msm_bus_commit_data(int *dirty_nodes, int ctx, int num_dirty);
-+int msm_bus_update_bw(struct msm_bus_node_device_type *nodedev, int ctx,
-+ int64_t add_bw, int **dirty_nodes, int *num_dirty);
-+void *msm_bus_realloc_devmem(struct device *dev, void *p, size_t old_size,
-+ size_t new_size, gfp_t flags);
-+
-+extern struct msm_bus_device_node_registration
-+ *msm_bus_of_to_pdata(struct platform_device *pdev);
-+extern void msm_bus_arb_setops_adhoc(struct msm_bus_arb_ops *arb_ops);
-+extern int msm_bus_bimc_set_ops(struct msm_bus_node_device_type *bus_dev);
-+extern int msm_bus_noc_set_ops(struct msm_bus_node_device_type *bus_dev);
-+extern int msm_bus_of_get_static_rules(struct platform_device *pdev,
-+ struct bus_rule_type **static_rule);
-+extern int msm_rules_update_path(struct list_head *input_list,
-+ struct list_head *output_list);
-+extern void print_all_rules(void);
-+#endif /* _ARCH_ARM_MACH_MSM_BUS_ADHOC_H */
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_arb_adhoc.c
-@@ -0,0 +1,998 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is Mree software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/mutex.h>
-+#include <linux/clk.h>
-+#include "msm-bus.h"
-+#include "msm_bus_core.h"
-+#include "msm_bus_adhoc.h"
-+
-+#define NUM_CL_HANDLES 50
-+#define NUM_LNODES 3
-+
-+struct bus_search_type {
-+ struct list_head link;
-+ struct list_head node_list;
-+};
-+
-+struct handle_type {
-+ int num_entries;
-+ struct msm_bus_client **cl_list;
-+};
-+
-+static struct handle_type handle_list;
-+struct list_head input_list;
-+struct list_head apply_list;
-+
-+DEFINE_MUTEX(msm_bus_adhoc_lock);
-+
-+static bool chk_bl_list(struct list_head *black_list, unsigned int id)
-+{
-+ struct msm_bus_node_device_type *bus_node = NULL;
-+
-+ list_for_each_entry(bus_node, black_list, link) {
-+ if (bus_node->node_info->id == id)
-+ return true;
-+ }
-+ return false;
-+}
-+
-+static void copy_remaining_nodes(struct list_head *edge_list, struct list_head
-+ *traverse_list, struct list_head *route_list)
-+{
-+ struct bus_search_type *search_node;
-+
-+ if (list_empty(edge_list) && list_empty(traverse_list))
-+ return;
-+
-+ search_node = kzalloc(sizeof(struct bus_search_type), GFP_KERNEL);
-+ INIT_LIST_HEAD(&search_node->node_list);
-+ list_splice_init(edge_list, traverse_list);
-+ list_splice_init(traverse_list, &search_node->node_list);
-+ list_add_tail(&search_node->link, route_list);
-+}
-+
-+/*
-+ * Duplicate instantiaion from msm_bus_arb.c. Todo there needs to be a
-+ * "util" file for these common func/macros.
-+ *
-+ * */
-+uint64_t msm_bus_div64(unsigned int w, uint64_t bw)
-+{
-+ uint64_t *b = &bw;
-+
-+ if ((bw > 0) && (bw < w))
-+ return 1;
-+
-+ switch (w) {
-+ case 0:
-+ WARN(1, "AXI: Divide by 0 attempted\n");
-+ case 1: return bw;
-+ case 2: return (bw >> 1);
-+ case 4: return (bw >> 2);
-+ case 8: return (bw >> 3);
-+ case 16: return (bw >> 4);
-+ case 32: return (bw >> 5);
-+ }
-+
-+ do_div(*b, w);
-+ return *b;
-+}
-+
-+int msm_bus_device_match_adhoc(struct device *dev, void *id)
-+{
-+ int ret = 0;
-+ struct msm_bus_node_device_type *bnode = dev->platform_data;
-+
-+ if (bnode)
-+ ret = (bnode->node_info->id == *(unsigned int *)id);
-+ else
-+ ret = 0;
-+
-+ return ret;
-+}
-+
-+static int gen_lnode(struct device *dev,
-+ int next_hop, int prev_idx)
-+{
-+ struct link_node *lnode;
-+ struct msm_bus_node_device_type *cur_dev = NULL;
-+ int lnode_idx = -1;
-+
-+ if (!dev)
-+ goto exit_gen_lnode;
-+
-+ cur_dev = dev->platform_data;
-+ if (!cur_dev) {
-+ MSM_BUS_ERR("%s: Null device ptr", __func__);
-+ goto exit_gen_lnode;
-+ }
-+
-+ if (!cur_dev->num_lnodes) {
-+ cur_dev->lnode_list = devm_kzalloc(dev,
-+ sizeof(struct link_node) * NUM_LNODES,
-+ GFP_KERNEL);
-+ if (!cur_dev->lnode_list)
-+ goto exit_gen_lnode;
-+
-+ lnode = cur_dev->lnode_list;
-+ cur_dev->num_lnodes = NUM_LNODES;
-+ lnode_idx = 0;
-+ } else {
-+ int i;
-+ for (i = 0; i < cur_dev->num_lnodes; i++) {
-+ if (!cur_dev->lnode_list[i].in_use)
-+ break;
-+ }
-+
-+ if (i < cur_dev->num_lnodes) {
-+ lnode = &cur_dev->lnode_list[i];
-+ lnode_idx = i;
-+ } else {
-+ struct link_node *realloc_list;
-+ size_t cur_size = sizeof(struct link_node) *
-+ cur_dev->num_lnodes;
-+
-+ cur_dev->num_lnodes += NUM_LNODES;
-+ realloc_list = msm_bus_realloc_devmem(
-+ dev,
-+ cur_dev->lnode_list,
-+ cur_size,
-+ sizeof(struct link_node) *
-+ cur_dev->num_lnodes, GFP_KERNEL);
-+
-+ if (!realloc_list)
-+ goto exit_gen_lnode;
-+
-+ cur_dev->lnode_list = realloc_list;
-+ lnode = &cur_dev->lnode_list[i];
-+ lnode_idx = i;
-+ }
-+ }
-+
-+ lnode->in_use = 1;
-+ if (next_hop == cur_dev->node_info->id) {
-+ lnode->next = -1;
-+ lnode->next_dev = NULL;
-+ } else {
-+ lnode->next = prev_idx;
-+ lnode->next_dev = bus_find_device(&msm_bus_type, NULL,
-+ (void *) &next_hop,
-+ msm_bus_device_match_adhoc);
-+ }
-+
-+ memset(lnode->lnode_ib, 0, sizeof(uint64_t) * NUM_CTX);
-+ memset(lnode->lnode_ab, 0, sizeof(uint64_t) * NUM_CTX);
-+
-+exit_gen_lnode:
-+ return lnode_idx;
-+}
-+
-+static int remove_lnode(struct msm_bus_node_device_type *cur_dev,
-+ int lnode_idx)
-+{
-+ int ret = 0;
-+
-+ if (!cur_dev) {
-+ MSM_BUS_ERR("%s: Null device ptr", __func__);
-+ ret = -ENODEV;
-+ goto exit_remove_lnode;
-+ }
-+
-+ if (lnode_idx != -1) {
-+ if (!cur_dev->num_lnodes ||
-+ (lnode_idx > (cur_dev->num_lnodes - 1))) {
-+ MSM_BUS_ERR("%s: Invalid Idx %d, num_lnodes %d",
-+ __func__, lnode_idx, cur_dev->num_lnodes);
-+ ret = -ENODEV;
-+ goto exit_remove_lnode;
-+ }
-+
-+ cur_dev->lnode_list[lnode_idx].next = -1;
-+ cur_dev->lnode_list[lnode_idx].next_dev = NULL;
-+ cur_dev->lnode_list[lnode_idx].in_use = 0;
-+ }
-+
-+exit_remove_lnode:
-+ return ret;
-+}
-+
-+static int prune_path(struct list_head *route_list, int dest, int src,
-+ struct list_head *black_list, int found)
-+{
-+ struct bus_search_type *search_node, *temp_search_node;
-+ struct msm_bus_node_device_type *bus_node;
-+ struct list_head *bl_list;
-+ struct list_head *temp_bl_list;
-+ int search_dev_id = dest;
-+ struct device *dest_dev = bus_find_device(&msm_bus_type, NULL,
-+ (void *) &dest,
-+ msm_bus_device_match_adhoc);
-+ int lnode_hop = -1;
-+
-+ if (!found)
-+ goto reset_links;
-+
-+ if (!dest_dev) {
-+ MSM_BUS_ERR("%s: Can't find dest dev %d", __func__, dest);
-+ goto exit_prune_path;
-+ }
-+
-+ lnode_hop = gen_lnode(dest_dev, search_dev_id, lnode_hop);
-+
-+ list_for_each_entry_reverse(search_node, route_list, link) {
-+ list_for_each_entry(bus_node, &search_node->node_list, link) {
-+ unsigned int i;
-+ for (i = 0; i < bus_node->node_info->num_connections;
-+ i++) {
-+ if (bus_node->node_info->connections[i] ==
-+ search_dev_id) {
-+ dest_dev = bus_find_device(
-+ &msm_bus_type,
-+ NULL,
-+ (void *)
-+ &bus_node->node_info->
-+ id,
-+ msm_bus_device_match_adhoc);
-+
-+ if (!dest_dev) {
-+ lnode_hop = -1;
-+ goto reset_links;
-+ }
-+
-+ lnode_hop = gen_lnode(dest_dev,
-+ search_dev_id,
-+ lnode_hop);
-+ search_dev_id =
-+ bus_node->node_info->id;
-+ break;
-+ }
-+ }
-+ }
-+ }
-+reset_links:
-+ list_for_each_entry_safe(search_node, temp_search_node, route_list,
-+ link) {
-+ list_for_each_entry(bus_node, &search_node->node_list,
-+ link)
-+ bus_node->node_info->is_traversed = false;
-+
-+ list_del(&search_node->link);
-+ kfree(search_node);
-+ }
-+
-+ list_for_each_safe(bl_list, temp_bl_list, black_list)
-+ list_del(bl_list);
-+
-+exit_prune_path:
-+ return lnode_hop;
-+}
-+
-+static void setup_bl_list(struct msm_bus_node_device_type *node,
-+ struct list_head *black_list)
-+{
-+ unsigned int i;
-+
-+ for (i = 0; i < node->node_info->num_blist; i++) {
-+ struct msm_bus_node_device_type *bdev;
-+ bdev = node->node_info->black_connections[i]->platform_data;
-+ list_add_tail(&bdev->link, black_list);
-+ }
-+}
-+
-+static int getpath(int src, int dest)
-+{
-+ struct list_head traverse_list;
-+ struct list_head edge_list;
-+ struct list_head route_list;
-+ struct list_head black_list;
-+ struct device *src_dev = bus_find_device(&msm_bus_type, NULL,
-+ (void *) &src,
-+ msm_bus_device_match_adhoc);
-+ struct msm_bus_node_device_type *src_node;
-+ struct bus_search_type *search_node;
-+ int found = 0;
-+ int depth_index = 0;
-+ int first_hop = -1;
-+
-+ INIT_LIST_HEAD(&traverse_list);
-+ INIT_LIST_HEAD(&edge_list);
-+ INIT_LIST_HEAD(&route_list);
-+ INIT_LIST_HEAD(&black_list);
-+
-+ if (!src_dev) {
-+ MSM_BUS_ERR("%s: Cannot locate src dev %d", __func__, src);
-+ goto exit_getpath;
-+ }
-+
-+ src_node = src_dev->platform_data;
-+ if (!src_node) {
-+ MSM_BUS_ERR("%s:Fatal, Source dev %d not found", __func__, src);
-+ goto exit_getpath;
-+ }
-+ list_add_tail(&src_node->link, &traverse_list);
-+
-+ while ((!found && !list_empty(&traverse_list))) {
-+ struct msm_bus_node_device_type *bus_node = NULL;
-+ /* Locate dest_id in the traverse list */
-+ list_for_each_entry(bus_node, &traverse_list, link) {
-+ if (bus_node->node_info->id == dest) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ if (!found) {
-+ unsigned int i;
-+ /* Setup the new edge list */
-+ list_for_each_entry(bus_node, &traverse_list, link) {
-+ /* Setup list of black-listed nodes */
-+ setup_bl_list(bus_node, &black_list);
-+
-+ for (i = 0; i < bus_node->node_info->
-+ num_connections; i++) {
-+ bool skip;
-+ struct msm_bus_node_device_type
-+ *node_conn;
-+ node_conn = bus_node->node_info->
-+ dev_connections[i]->
-+ platform_data;
-+ if (node_conn->node_info->
-+ is_traversed) {
-+ MSM_BUS_ERR("Circ Path %d\n",
-+ node_conn->node_info->id);
-+ goto reset_traversed;
-+ }
-+ skip = chk_bl_list(&black_list,
-+ bus_node->node_info->
-+ connections[i]);
-+ if (!skip) {
-+ list_add_tail(&node_conn->link,
-+ &edge_list);
-+ node_conn->node_info->
-+ is_traversed = true;
-+ }
-+ }
-+ }
-+
-+ /* Keep tabs of the previous search list */
-+ search_node = kzalloc(sizeof(struct bus_search_type),
-+ GFP_KERNEL);
-+ INIT_LIST_HEAD(&search_node->node_list);
-+ list_splice_init(&traverse_list,
-+ &search_node->node_list);
-+ /* Add the previous search list to a route list */
-+ list_add_tail(&search_node->link, &route_list);
-+ /* Advancing the list depth */
-+ depth_index++;
-+ list_splice_init(&edge_list, &traverse_list);
-+ }
-+ }
-+reset_traversed:
-+ copy_remaining_nodes(&edge_list, &traverse_list, &route_list);
-+ first_hop = prune_path(&route_list, dest, src, &black_list, found);
-+
-+exit_getpath:
-+ return first_hop;
-+}
-+
-+static uint64_t arbitrate_bus_req(struct msm_bus_node_device_type *bus_dev,
-+ int ctx)
-+{
-+ int i;
-+ uint64_t max_ib = 0;
-+ uint64_t sum_ab = 0;
-+ uint64_t bw_max_hz;
-+ struct msm_bus_node_device_type *fab_dev = NULL;
-+ uint32_t util_fact = 0;
-+ uint32_t vrail_comp = 0;
-+
-+ /* Find max ib */
-+ for (i = 0; i < bus_dev->num_lnodes; i++) {
-+ max_ib = max(max_ib, bus_dev->lnode_list[i].lnode_ib[ctx]);
-+ sum_ab += bus_dev->lnode_list[i].lnode_ab[ctx];
-+ }
-+ /*
-+ * Account for Util factor and vrail comp. The new aggregation
-+ * formula is:
-+ * Freq_hz = max((sum(ab) * util_fact)/num_chan, max(ib)/vrail_comp)
-+ * / bus-width
-+ * util_fact and vrail comp are obtained from fabric/Node's dts
-+ * properties.
-+ * They default to 100 if absent.
-+ */
-+ fab_dev = bus_dev->node_info->bus_device->platform_data;
-+ /* Don't do this for virtual fabrics */
-+ if (fab_dev && fab_dev->fabdev) {
-+ util_fact = bus_dev->node_info->util_fact ?
-+ bus_dev->node_info->util_fact :
-+ fab_dev->fabdev->util_fact;
-+ vrail_comp = bus_dev->node_info->vrail_comp ?
-+ bus_dev->node_info->vrail_comp :
-+ fab_dev->fabdev->vrail_comp;
-+ sum_ab *= util_fact;
-+ sum_ab = msm_bus_div64(100, sum_ab);
-+ max_ib *= 100;
-+ max_ib = msm_bus_div64(vrail_comp, max_ib);
-+ }
-+
-+ /* Account for multiple channels if any */
-+ if (bus_dev->node_info->num_qports > 1)
-+ sum_ab = msm_bus_div64(bus_dev->node_info->num_qports,
-+ sum_ab);
-+
-+ if (!bus_dev->node_info->buswidth) {
-+ MSM_BUS_WARN("No bus width found for %d. Using default\n",
-+ bus_dev->node_info->id);
-+ bus_dev->node_info->buswidth = 8;
-+ }
-+
-+ bw_max_hz = max(max_ib, sum_ab);
-+ bw_max_hz = msm_bus_div64(bus_dev->node_info->buswidth,
-+ bw_max_hz);
-+
-+ return bw_max_hz;
-+}
-+
-+static void del_inp_list(struct list_head *list)
-+{
-+ struct rule_update_path_info *rule_node;
-+ struct rule_update_path_info *rule_node_tmp;
-+
-+ list_for_each_entry_safe(rule_node, rule_node_tmp, list, link)
-+ list_del(&rule_node->link);
-+}
-+
-+static void del_op_list(struct list_head *list)
-+{
-+ struct rule_apply_rcm_info *rule;
-+ struct rule_apply_rcm_info *rule_tmp;
-+
-+ list_for_each_entry_safe(rule, rule_tmp, list, link)
-+ list_del(&rule->link);
-+}
-+
-+static int msm_bus_apply_rules(struct list_head *list, bool after_clk_commit)
-+{
-+ struct rule_apply_rcm_info *rule;
-+ struct device *dev = NULL;
-+ struct msm_bus_node_device_type *dev_info = NULL;
-+ int ret = 0;
-+ bool throttle_en = false;
-+
-+ list_for_each_entry(rule, list, link) {
-+ if (!rule)
-+ break;
-+
-+ if (rule && (rule->after_clk_commit != after_clk_commit))
-+ continue;
-+
-+ dev = bus_find_device(&msm_bus_type, NULL,
-+ (void *) &rule->id,
-+ msm_bus_device_match_adhoc);
-+
-+ if (!dev) {
-+ MSM_BUS_ERR("Can't find dev node for %d", rule->id);
-+ continue;
-+ }
-+ dev_info = dev->platform_data;
-+
-+ throttle_en = ((rule->throttle == THROTTLE_ON) ? true : false);
-+ ret = msm_bus_enable_limiter(dev_info, throttle_en,
-+ rule->lim_bw);
-+ if (ret)
-+ MSM_BUS_ERR("Failed to set limiter for %d", rule->id);
-+ }
-+
-+ return ret;
-+}
-+
-+static uint64_t get_node_aggab(struct msm_bus_node_device_type *bus_dev)
-+{
-+ int i;
-+ int ctx;
-+ uint64_t max_agg_ab = 0;
-+ uint64_t agg_ab = 0;
-+
-+ for (ctx = 0; ctx < NUM_CTX; ctx++) {
-+ for (i = 0; i < bus_dev->num_lnodes; i++)
-+ agg_ab += bus_dev->lnode_list[i].lnode_ab[ctx];
-+
-+ if (bus_dev->node_info->num_qports > 1)
-+ agg_ab = msm_bus_div64(bus_dev->node_info->num_qports,
-+ agg_ab);
-+
-+ max_agg_ab = max(max_agg_ab, agg_ab);
-+ }
-+
-+ return max_agg_ab;
-+}
-+
-+static uint64_t get_node_ib(struct msm_bus_node_device_type *bus_dev)
-+{
-+ int i;
-+ int ctx;
-+ uint64_t max_ib = 0;
-+
-+ for (ctx = 0; ctx < NUM_CTX; ctx++) {
-+ for (i = 0; i < bus_dev->num_lnodes; i++)
-+ max_ib = max(max_ib,
-+ bus_dev->lnode_list[i].lnode_ib[ctx]);
-+ }
-+ return max_ib;
-+}
-+
-+static int update_path(int src, int dest, uint64_t req_ib, uint64_t req_bw,
-+ uint64_t cur_ib, uint64_t cur_bw, int src_idx, int ctx)
-+{
-+ struct device *src_dev = NULL;
-+ struct device *next_dev = NULL;
-+ struct link_node *lnode = NULL;
-+ struct msm_bus_node_device_type *dev_info = NULL;
-+ int curr_idx;
-+ int ret = 0;
-+ int *dirty_nodes = NULL;
-+ int num_dirty = 0;
-+ struct rule_update_path_info *rule_node;
-+ bool rules_registered = msm_rule_are_rules_registered();
-+
-+ src_dev = bus_find_device(&msm_bus_type, NULL,
-+ (void *) &src,
-+ msm_bus_device_match_adhoc);
-+
-+ if (!src_dev) {
-+ MSM_BUS_ERR("%s: Can't find source device %d", __func__, src);
-+ ret = -ENODEV;
-+ goto exit_update_path;
-+ }
-+
-+ next_dev = src_dev;
-+
-+ if (src_idx < 0) {
-+ MSM_BUS_ERR("%s: Invalid lnode idx %d", __func__, src_idx);
-+ ret = -ENXIO;
-+ goto exit_update_path;
-+ }
-+ curr_idx = src_idx;
-+
-+ INIT_LIST_HEAD(&input_list);
-+ INIT_LIST_HEAD(&apply_list);
-+
-+ while (next_dev) {
-+ dev_info = next_dev->platform_data;
-+
-+ if (curr_idx >= dev_info->num_lnodes) {
-+ MSM_BUS_ERR("%s: Invalid lnode Idx %d num lnodes %d",
-+ __func__, curr_idx, dev_info->num_lnodes);
-+ ret = -ENXIO;
-+ goto exit_update_path;
-+ }
-+
-+ lnode = &dev_info->lnode_list[curr_idx];
-+ lnode->lnode_ib[ctx] = req_ib;
-+ lnode->lnode_ab[ctx] = req_bw;
-+
-+ dev_info->cur_clk_hz[ctx] = arbitrate_bus_req(dev_info, ctx);
-+
-+ /* Start updating the clocks at the first hop.
-+ * Its ok to figure out the aggregated
-+ * request at this node.
-+ */
-+ if (src_dev != next_dev) {
-+ ret = msm_bus_update_clks(dev_info, ctx, &dirty_nodes,
-+ &num_dirty);
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to update clks dev %d",
-+ __func__, dev_info->node_info->id);
-+ goto exit_update_path;
-+ }
-+ }
-+
-+ ret = msm_bus_update_bw(dev_info, ctx, req_bw, &dirty_nodes,
-+ &num_dirty);
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to update bw dev %d",
-+ __func__, dev_info->node_info->id);
-+ goto exit_update_path;
-+ }
-+
-+ if (rules_registered) {
-+ rule_node = &dev_info->node_info->rule;
-+ rule_node->id = dev_info->node_info->id;
-+ rule_node->ib = get_node_ib(dev_info);
-+ rule_node->ab = get_node_aggab(dev_info);
-+ rule_node->clk = max(dev_info->cur_clk_hz[ACTIVE_CTX],
-+ dev_info->cur_clk_hz[DUAL_CTX]);
-+ list_add_tail(&rule_node->link, &input_list);
-+ }
-+
-+ next_dev = lnode->next_dev;
-+ curr_idx = lnode->next;
-+ }
-+
-+ if (rules_registered) {
-+ msm_rules_update_path(&input_list, &apply_list);
-+ msm_bus_apply_rules(&apply_list, false);
-+ }
-+
-+ msm_bus_commit_data(dirty_nodes, ctx, num_dirty);
-+
-+ if (rules_registered) {
-+ msm_bus_apply_rules(&apply_list, true);
-+ del_inp_list(&input_list);
-+ del_op_list(&apply_list);
-+ }
-+exit_update_path:
-+ return ret;
-+}
-+
-+static int remove_path(int src, int dst, uint64_t cur_ib, uint64_t cur_ab,
-+ int src_idx, int active_only)
-+{
-+ struct device *src_dev = NULL;
-+ struct device *next_dev = NULL;
-+ struct link_node *lnode = NULL;
-+ struct msm_bus_node_device_type *dev_info = NULL;
-+ int ret = 0;
-+ int cur_idx = src_idx;
-+ int next_idx;
-+
-+ /* Update the current path to zero out all request from
-+ * this cient on all paths
-+ */
-+
-+ ret = update_path(src, dst, 0, 0, cur_ib, cur_ab, src_idx,
-+ active_only);
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Error zeroing out path ctx %d",
-+ __func__, ACTIVE_CTX);
-+ goto exit_remove_path;
-+ }
-+
-+ src_dev = bus_find_device(&msm_bus_type, NULL,
-+ (void *) &src,
-+ msm_bus_device_match_adhoc);
-+ if (!src_dev) {
-+ MSM_BUS_ERR("%s: Can't find source device %d", __func__, src);
-+ ret = -ENODEV;
-+ goto exit_remove_path;
-+ }
-+
-+ next_dev = src_dev;
-+
-+ while (next_dev) {
-+ dev_info = next_dev->platform_data;
-+ lnode = &dev_info->lnode_list[cur_idx];
-+ next_idx = lnode->next;
-+ next_dev = lnode->next_dev;
-+ remove_lnode(dev_info, cur_idx);
-+ cur_idx = next_idx;
-+ }
-+
-+exit_remove_path:
-+ return ret;
-+}
-+
-+static void getpath_debug(int src, int curr, int active_only)
-+{
-+ struct device *dev_node;
-+ struct device *dev_it;
-+ unsigned int hop = 1;
-+ int idx;
-+ struct msm_bus_node_device_type *devinfo;
-+ int i;
-+
-+ dev_node = bus_find_device(&msm_bus_type, NULL,
-+ (void *) &src,
-+ msm_bus_device_match_adhoc);
-+
-+ if (!dev_node) {
-+ MSM_BUS_ERR("SRC NOT FOUND %d", src);
-+ return;
-+ }
-+
-+ idx = curr;
-+ devinfo = dev_node->platform_data;
-+ dev_it = dev_node;
-+
-+ MSM_BUS_ERR("Route list Src %d", src);
-+ while (dev_it) {
-+ struct msm_bus_node_device_type *busdev =
-+ devinfo->node_info->bus_device->platform_data;
-+
-+ MSM_BUS_ERR("Hop[%d] at Device %d ctx %d", hop,
-+ devinfo->node_info->id, active_only);
-+
-+ for (i = 0; i < NUM_CTX; i++) {
-+ MSM_BUS_ERR("dev info sel ib %llu",
-+ devinfo->cur_clk_hz[i]);
-+ MSM_BUS_ERR("dev info sel ab %llu",
-+ devinfo->node_ab.ab[i]);
-+ }
-+
-+ dev_it = devinfo->lnode_list[idx].next_dev;
-+ idx = devinfo->lnode_list[idx].next;
-+ if (dev_it)
-+ devinfo = dev_it->platform_data;
-+
-+ MSM_BUS_ERR("Bus Device %d", busdev->node_info->id);
-+ MSM_BUS_ERR("Bus Clock %llu", busdev->clk[active_only].rate);
-+
-+ if (idx < 0)
-+ break;
-+ hop++;
-+ }
-+}
-+
-+static void unregister_client_adhoc(uint32_t cl)
-+{
-+ int i;
-+ struct msm_bus_scale_pdata *pdata;
-+ int lnode, src, curr, dest;
-+ uint64_t cur_clk, cur_bw;
-+ struct msm_bus_client *client;
-+
-+ mutex_lock(&msm_bus_adhoc_lock);
-+ if (!cl) {
-+ MSM_BUS_ERR("%s: Null cl handle passed unregister\n",
-+ __func__);
-+ goto exit_unregister_client;
-+ }
-+ client = handle_list.cl_list[cl];
-+ pdata = client->pdata;
-+ if (!pdata) {
-+ MSM_BUS_ERR("%s: Null pdata passed to unregister\n",
-+ __func__);
-+ goto exit_unregister_client;
-+ }
-+
-+ curr = client->curr;
-+ if (curr >= pdata->num_usecases) {
-+ MSM_BUS_ERR("Invalid index Defaulting curr to 0");
-+ curr = 0;
-+ }
-+
-+ MSM_BUS_DBG("%s: Unregistering client %p", __func__, client);
-+
-+ for (i = 0; i < pdata->usecase->num_paths; i++) {
-+ src = client->pdata->usecase[curr].vectors[i].src;
-+ dest = client->pdata->usecase[curr].vectors[i].dst;
-+
-+ lnode = client->src_pnode[i];
-+ cur_clk = client->pdata->usecase[curr].vectors[i].ib;
-+ cur_bw = client->pdata->usecase[curr].vectors[i].ab;
-+ remove_path(src, dest, cur_clk, cur_bw, lnode,
-+ pdata->active_only);
-+ }
-+ msm_bus_dbg_client_data(client->pdata, MSM_BUS_DBG_UNREGISTER, cl);
-+ kfree(client->src_pnode);
-+ kfree(client);
-+ handle_list.cl_list[cl] = NULL;
-+exit_unregister_client:
-+ mutex_unlock(&msm_bus_adhoc_lock);
-+ return;
-+}
-+
-+static int alloc_handle_lst(int size)
-+{
-+ int ret = 0;
-+ struct msm_bus_client **t_cl_list;
-+
-+ if (!handle_list.num_entries) {
-+ t_cl_list = kzalloc(sizeof(struct msm_bus_client *)
-+ * NUM_CL_HANDLES, GFP_KERNEL);
-+ if (ZERO_OR_NULL_PTR(t_cl_list)) {
-+ ret = -ENOMEM;
-+ MSM_BUS_ERR("%s: Failed to allocate handles list",
-+ __func__);
-+ goto exit_alloc_handle_lst;
-+ }
-+ handle_list.cl_list = t_cl_list;
-+ handle_list.num_entries += NUM_CL_HANDLES;
-+ } else {
-+ t_cl_list = krealloc(handle_list.cl_list,
-+ sizeof(struct msm_bus_client *) *
-+ handle_list.num_entries + NUM_CL_HANDLES,
-+ GFP_KERNEL);
-+ if (ZERO_OR_NULL_PTR(t_cl_list)) {
-+ ret = -ENOMEM;
-+ MSM_BUS_ERR("%s: Failed to allocate handles list",
-+ __func__);
-+ goto exit_alloc_handle_lst;
-+ }
-+
-+ memset(&handle_list.cl_list[handle_list.num_entries], 0,
-+ NUM_CL_HANDLES * sizeof(struct msm_bus_client *));
-+ handle_list.num_entries += NUM_CL_HANDLES;
-+ handle_list.cl_list = t_cl_list;
-+ }
-+exit_alloc_handle_lst:
-+ return ret;
-+}
-+
-+static uint32_t gen_handle(struct msm_bus_client *client)
-+{
-+ uint32_t handle = 0;
-+ int i;
-+ int ret = 0;
-+
-+ for (i = 0; i < handle_list.num_entries; i++) {
-+ if (i && !handle_list.cl_list[i]) {
-+ handle = i;
-+ break;
-+ }
-+ }
-+
-+ if (!handle) {
-+ ret = alloc_handle_lst(NUM_CL_HANDLES);
-+
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to allocate handle list",
-+ __func__);
-+ goto exit_gen_handle;
-+ }
-+ handle = i + 1;
-+ }
-+ handle_list.cl_list[handle] = client;
-+exit_gen_handle:
-+ return handle;
-+}
-+
-+static uint32_t register_client_adhoc(struct msm_bus_scale_pdata *pdata)
-+{
-+ int src, dest;
-+ int i;
-+ struct msm_bus_client *client = NULL;
-+ int *lnode;
-+ uint32_t handle = 0;
-+
-+ mutex_lock(&msm_bus_adhoc_lock);
-+ client = kzalloc(sizeof(struct msm_bus_client), GFP_KERNEL);
-+ if (!client) {
-+ MSM_BUS_ERR("%s: Error allocating client data", __func__);
-+ goto exit_register_client;
-+ }
-+ client->pdata = pdata;
-+
-+ lnode = kzalloc(pdata->usecase->num_paths * sizeof(int), GFP_KERNEL);
-+ if (ZERO_OR_NULL_PTR(lnode)) {
-+ MSM_BUS_ERR("%s: Error allocating pathnode ptr!", __func__);
-+ goto exit_register_client;
-+ }
-+ client->src_pnode = lnode;
-+
-+ for (i = 0; i < pdata->usecase->num_paths; i++) {
-+ src = pdata->usecase->vectors[i].src;
-+ dest = pdata->usecase->vectors[i].dst;
-+
-+ if ((src < 0) || (dest < 0)) {
-+ MSM_BUS_ERR("%s:Invalid src/dst.src %d dest %d",
-+ __func__, src, dest);
-+ goto exit_register_client;
-+ }
-+
-+ lnode[i] = getpath(src, dest);
-+ if (lnode[i] < 0) {
-+ MSM_BUS_ERR("%s:Failed to find path.src %d dest %d",
-+ __func__, src, dest);
-+ goto exit_register_client;
-+ }
-+ }
-+
-+ handle = gen_handle(client);
-+ msm_bus_dbg_client_data(client->pdata, MSM_BUS_DBG_REGISTER,
-+ handle);
-+ MSM_BUS_DBG("%s:Client handle %d %s", __func__, handle,
-+ client->pdata->name);
-+exit_register_client:
-+ mutex_unlock(&msm_bus_adhoc_lock);
-+ return handle;
-+}
-+
-+static int update_request_adhoc(uint32_t cl, unsigned int index)
-+{
-+ int i, ret = 0;
-+ struct msm_bus_scale_pdata *pdata;
-+ int lnode, src, curr, dest;
-+ uint64_t req_clk, req_bw, curr_clk, curr_bw;
-+ struct msm_bus_client *client;
-+ const char *test_cl = "Null";
-+ bool log_transaction = false;
-+
-+ mutex_lock(&msm_bus_adhoc_lock);
-+
-+ if (!cl) {
-+ MSM_BUS_ERR("%s: Invalid client handle %d", __func__, cl);
-+ ret = -ENXIO;
-+ goto exit_update_request;
-+ }
-+
-+ client = handle_list.cl_list[cl];
-+ pdata = client->pdata;
-+ if (!pdata) {
-+ MSM_BUS_ERR("%s: Client data Null.[client didn't register]",
-+ __func__);
-+ ret = -ENXIO;
-+ goto exit_update_request;
-+ }
-+
-+ if (index >= pdata->num_usecases) {
-+ MSM_BUS_ERR("Client %u passed invalid index: %d\n",
-+ cl, index);
-+ ret = -ENXIO;
-+ goto exit_update_request;
-+ }
-+
-+ if (client->curr == index) {
-+ MSM_BUS_DBG("%s: Not updating client request idx %d unchanged",
-+ __func__, index);
-+ goto exit_update_request;
-+ }
-+
-+ curr = client->curr;
-+ client->curr = index;
-+
-+ if (!strcmp(test_cl, pdata->name))
-+ log_transaction = true;
-+
-+ MSM_BUS_DBG("%s: cl: %u index: %d curr: %d num_paths: %d\n", __func__,
-+ cl, index, client->curr, client->pdata->usecase->num_paths);
-+
-+ for (i = 0; i < pdata->usecase->num_paths; i++) {
-+ src = client->pdata->usecase[index].vectors[i].src;
-+ dest = client->pdata->usecase[index].vectors[i].dst;
-+
-+ lnode = client->src_pnode[i];
-+ req_clk = client->pdata->usecase[index].vectors[i].ib;
-+ req_bw = client->pdata->usecase[index].vectors[i].ab;
-+ if (curr < 0) {
-+ curr_clk = 0;
-+ curr_bw = 0;
-+ } else {
-+ curr_clk = client->pdata->usecase[curr].vectors[i].ib;
-+ curr_bw = client->pdata->usecase[curr].vectors[i].ab;
-+ MSM_BUS_DBG("%s:ab: %llu ib: %llu\n", __func__,
-+ curr_bw, curr_clk);
-+ }
-+
-+ ret = update_path(src, dest, req_clk, req_bw,
-+ curr_clk, curr_bw, lnode, pdata->active_only);
-+
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Update path failed! %d ctx %d\n",
-+ __func__, ret, ACTIVE_CTX);
-+ goto exit_update_request;
-+ }
-+
-+ if (log_transaction)
-+ getpath_debug(src, lnode, pdata->active_only);
-+ }
-+ msm_bus_dbg_client_data(client->pdata, index , cl);
-+exit_update_request:
-+ mutex_unlock(&msm_bus_adhoc_lock);
-+ return ret;
-+}
-+
-+/**
-+ * msm_bus_arb_setops_adhoc() : Setup the bus arbitration ops
-+ * @ arb_ops: pointer to the arb ops.
-+ */
-+void msm_bus_arb_setops_adhoc(struct msm_bus_arb_ops *arb_ops)
-+{
-+ arb_ops->register_client = register_client_adhoc;
-+ arb_ops->update_request = update_request_adhoc;
-+ arb_ops->unregister_client = unregister_client_adhoc;
-+}
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_bimc.c
-@@ -0,0 +1,2112 @@
-+/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#define pr_fmt(fmt) "AXI: BIMC: %s(): " fmt, __func__
-+
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+#include "msm-bus-board.h"
-+#include "msm_bus_core.h"
-+#include "msm_bus_bimc.h"
-+#include "msm_bus_adhoc.h"
-+#include <trace/events/trace_msm_bus.h>
-+
-+enum msm_bus_bimc_slave_block {
-+ SLAVE_BLOCK_RESERVED = 0,
-+ SLAVE_BLOCK_SLAVE_WAY,
-+ SLAVE_BLOCK_XPU,
-+ SLAVE_BLOCK_ARBITER,
-+ SLAVE_BLOCK_SCMO,
-+};
-+
-+enum bke_sw {
-+ BKE_OFF = 0,
-+ BKE_ON = 1,
-+};
-+
-+/* M_Generic */
-+
-+#define M_REG_BASE(b) ((b) + 0x00008000)
-+
-+#define M_COMPONENT_INFO_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000000)
-+enum bimc_m_component_info {
-+ M_COMPONENT_INFO_RMSK = 0xffffff,
-+ M_COMPONENT_INFO_INSTANCE_BMSK = 0xff0000,
-+ M_COMPONENT_INFO_INSTANCE_SHFT = 0x10,
-+ M_COMPONENT_INFO_SUB_TYPE_BMSK = 0xff00,
-+ M_COMPONENT_INFO_SUB_TYPE_SHFT = 0x8,
-+ M_COMPONENT_INFO_TYPE_BMSK = 0xff,
-+ M_COMPONENT_INFO_TYPE_SHFT = 0x0,
-+};
-+
-+#define M_CONFIG_INFO_0_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000020)
-+enum bimc_m_config_info_0 {
-+ M_CONFIG_INFO_0_RMSK = 0xff00ffff,
-+ M_CONFIG_INFO_0_SYNC_MODE_BMSK = 0xff000000,
-+ M_CONFIG_INFO_0_SYNC_MODE_SHFT = 0x18,
-+ M_CONFIG_INFO_0_CONNECTION_TYPE_BMSK = 0xff00,
-+ M_CONFIG_INFO_0_CONNECTION_TYPE_SHFT = 0x8,
-+ M_CONFIG_INFO_0_FUNC_BMSK = 0xff,
-+ M_CONFIG_INFO_0_FUNC_SHFT = 0x0,
-+};
-+
-+#define M_CONFIG_INFO_1_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000030)
-+enum bimc_m_config_info_1 {
-+ M_CONFIG_INFO_1_RMSK = 0xffffffff,
-+ M_CONFIG_INFO_1_SWAY_CONNECTIVITY_BMSK = 0xffffffff,
-+ M_CONFIG_INFO_1_SWAY_CONNECTIVITY_SHFT = 0x0,
-+};
-+
-+#define M_CONFIG_INFO_2_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000040)
-+enum bimc_m_config_info_2 {
-+ M_CONFIG_INFO_2_RMSK = 0xffffffff,
-+ M_CONFIG_INFO_2_M_DATA_WIDTH_BMSK = 0xffff0000,
-+ M_CONFIG_INFO_2_M_DATA_WIDTH_SHFT = 0x10,
-+ M_CONFIG_INFO_2_M_TID_WIDTH_BMSK = 0xff00,
-+ M_CONFIG_INFO_2_M_TID_WIDTH_SHFT = 0x8,
-+ M_CONFIG_INFO_2_M_MID_WIDTH_BMSK = 0xff,
-+ M_CONFIG_INFO_2_M_MID_WIDTH_SHFT = 0x0,
-+};
-+
-+#define M_CONFIG_INFO_3_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000050)
-+enum bimc_m_config_info_3 {
-+ M_CONFIG_INFO_3_RMSK = 0xffffffff,
-+ M_CONFIG_INFO_3_RCH_DEPTH_BMSK = 0xff000000,
-+ M_CONFIG_INFO_3_RCH_DEPTH_SHFT = 0x18,
-+ M_CONFIG_INFO_3_BCH_DEPTH_BMSK = 0xff0000,
-+ M_CONFIG_INFO_3_BCH_DEPTH_SHFT = 0x10,
-+ M_CONFIG_INFO_3_WCH_DEPTH_BMSK = 0xff00,
-+ M_CONFIG_INFO_3_WCH_DEPTH_SHFT = 0x8,
-+ M_CONFIG_INFO_3_ACH_DEPTH_BMSK = 0xff,
-+ M_CONFIG_INFO_3_ACH_DEPTH_SHFT = 0x0,
-+};
-+
-+#define M_CONFIG_INFO_4_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000060)
-+enum bimc_m_config_info_4 {
-+ M_CONFIG_INFO_4_RMSK = 0xffff,
-+ M_CONFIG_INFO_4_REORDER_BUF_DEPTH_BMSK = 0xff00,
-+ M_CONFIG_INFO_4_REORDER_BUF_DEPTH_SHFT = 0x8,
-+ M_CONFIG_INFO_4_REORDER_TABLE_DEPTH_BMSK = 0xff,
-+ M_CONFIG_INFO_4_REORDER_TABLE_DEPTH_SHFT = 0x0,
-+};
-+
-+#define M_CONFIG_INFO_5_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000070)
-+enum bimc_m_config_info_5 {
-+ M_CONFIG_INFO_5_RMSK = 0x111,
-+ M_CONFIG_INFO_5_MP2ARB_PIPELINE_EN_BMSK = 0x100,
-+ M_CONFIG_INFO_5_MP2ARB_PIPELINE_EN_SHFT = 0x8,
-+ M_CONFIG_INFO_5_MPBUF_PIPELINE_EN_BMSK = 0x10,
-+ M_CONFIG_INFO_5_MPBUF_PIPELINE_EN_SHFT = 0x4,
-+ M_CONFIG_INFO_5_M2MP_PIPELINE_EN_BMSK = 0x1,
-+ M_CONFIG_INFO_5_M2MP_PIPELINE_EN_SHFT = 0x0,
-+};
-+
-+#define M_INT_STATUS_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000100)
-+enum bimc_m_int_status {
-+ M_INT_STATUS_RMSK = 0x3,
-+};
-+
-+#define M_INT_CLR_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000108)
-+enum bimc_m_int_clr {
-+ M_INT_CLR_RMSK = 0x3,
-+};
-+
-+#define M_INT_EN_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x0000010c)
-+enum bimc_m_int_en {
-+ M_INT_EN_RMSK = 0x3,
-+};
-+
-+#define M_CLK_CTRL_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000200)
-+enum bimc_m_clk_ctrl {
-+ M_CLK_CTRL_RMSK = 0x3,
-+ M_CLK_CTRL_MAS_CLK_GATING_EN_BMSK = 0x2,
-+ M_CLK_CTRL_MAS_CLK_GATING_EN_SHFT = 0x1,
-+ M_CLK_CTRL_CORE_CLK_GATING_EN_BMSK = 0x1,
-+ M_CLK_CTRL_CORE_CLK_GATING_EN_SHFT = 0x0,
-+};
-+
-+#define M_MODE_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000210)
-+enum bimc_m_mode {
-+ M_MODE_RMSK = 0xf0000011,
-+ M_MODE_WR_GATHER_BEATS_BMSK = 0xf0000000,
-+ M_MODE_WR_GATHER_BEATS_SHFT = 0x1c,
-+ M_MODE_NARROW_WR_BMSK = 0x10,
-+ M_MODE_NARROW_WR_SHFT = 0x4,
-+ M_MODE_ORDERING_MODEL_BMSK = 0x1,
-+ M_MODE_ORDERING_MODEL_SHFT = 0x0,
-+};
-+
-+#define M_PRIOLVL_OVERRIDE_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000230)
-+enum bimc_m_priolvl_override {
-+ M_PRIOLVL_OVERRIDE_RMSK = 0x301,
-+ M_PRIOLVL_OVERRIDE_BMSK = 0x300,
-+ M_PRIOLVL_OVERRIDE_SHFT = 0x8,
-+ M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK = 0x1,
-+ M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_SHFT = 0x0,
-+};
-+
-+#define M_RD_CMD_OVERRIDE_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000240)
-+enum bimc_m_read_command_override {
-+ M_RD_CMD_OVERRIDE_RMSK = 0x3071f7f,
-+ M_RD_CMD_OVERRIDE_AREQPRIO_BMSK = 0x3000000,
-+ M_RD_CMD_OVERRIDE_AREQPRIO_SHFT = 0x18,
-+ M_RD_CMD_OVERRIDE_AMEMTYPE_BMSK = 0x70000,
-+ M_RD_CMD_OVERRIDE_AMEMTYPE_SHFT = 0x10,
-+ M_RD_CMD_OVERRIDE_ATRANSIENT_BMSK = 0x1000,
-+ M_RD_CMD_OVERRIDE_ATRANSIENT_SHFT = 0xc,
-+ M_RD_CMD_OVERRIDE_ASHARED_BMSK = 0x800,
-+ M_RD_CMD_OVERRIDE_ASHARED_SHFT = 0xb,
-+ M_RD_CMD_OVERRIDE_AREDIRECT_BMSK = 0x400,
-+ M_RD_CMD_OVERRIDE_AREDIRECT_SHFT = 0xa,
-+ M_RD_CMD_OVERRIDE_AOOO_BMSK = 0x200,
-+ M_RD_CMD_OVERRIDE_AOOO_SHFT = 0x9,
-+ M_RD_CMD_OVERRIDE_AINNERSHARED_BMSK = 0x100,
-+ M_RD_CMD_OVERRIDE_AINNERSHARED_SHFT = 0x8,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK = 0x40,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT = 0x6,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_BMSK = 0x20,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_SHFT = 0x5,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_BMSK = 0x10,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_SHFT = 0x4,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_ASHARED_BMSK = 0x8,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_ASHARED_SHFT = 0x3,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_AREDIRECT_BMSK = 0x4,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_AREDIRECT_SHFT = 0x2,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_AOOO_BMSK = 0x2,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_AOOO_SHFT = 0x1,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_BMSK = 0x1,
-+ M_RD_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_SHFT = 0x0,
-+};
-+
-+#define M_WR_CMD_OVERRIDE_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000250)
-+enum bimc_m_write_command_override {
-+ M_WR_CMD_OVERRIDE_RMSK = 0x3071f7f,
-+ M_WR_CMD_OVERRIDE_AREQPRIO_BMSK = 0x3000000,
-+ M_WR_CMD_OVERRIDE_AREQPRIO_SHFT = 0x18,
-+ M_WR_CMD_OVERRIDE_AMEMTYPE_BMSK = 0x70000,
-+ M_WR_CMD_OVERRIDE_AMEMTYPE_SHFT = 0x10,
-+ M_WR_CMD_OVERRIDE_ATRANSIENT_BMSK = 0x1000,
-+ M_WR_CMD_OVERRIDE_ATRANSIENT_SHFT = 0xc,
-+ M_WR_CMD_OVERRIDE_ASHARED_BMSK = 0x800,
-+ M_WR_CMD_OVERRIDE_ASHARED_SHFT = 0xb,
-+ M_WR_CMD_OVERRIDE_AREDIRECT_BMSK = 0x400,
-+ M_WR_CMD_OVERRIDE_AREDIRECT_SHFT = 0xa,
-+ M_WR_CMD_OVERRIDE_AOOO_BMSK = 0x200,
-+ M_WR_CMD_OVERRIDE_AOOO_SHFT = 0x9,
-+ M_WR_CMD_OVERRIDE_AINNERSHARED_BMSK = 0x100,
-+ M_WR_CMD_OVERRIDE_AINNERSHARED_SHFT = 0x8,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK = 0x40,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT = 0x6,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_BMSK = 0x20,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_ATRANSIENT_SHFT = 0x5,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_BMSK = 0x10,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_AMEMTYPE_SHFT = 0x4,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_ASHARED_BMSK = 0x8,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_ASHARED_SHFT = 0x3,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_AREDIRECT_BMSK = 0x4,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_AREDIRECT_SHFT = 0x2,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_AOOO_BMSK = 0x2,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_AOOO_SHFT = 0x1,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_BMSK = 0x1,
-+ M_WR_CMD_OVERRIDE_OVERRIDE_AINNERSHARED_SHFT = 0x0,
-+};
-+
-+#define M_BKE_EN_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000300)
-+enum bimc_m_bke_en {
-+ M_BKE_EN_RMSK = 0x1,
-+ M_BKE_EN_EN_BMSK = 0x1,
-+ M_BKE_EN_EN_SHFT = 0x0,
-+};
-+
-+/* Grant Period registers */
-+#define M_BKE_GP_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000304)
-+enum bimc_m_bke_grant_period {
-+ M_BKE_GP_RMSK = 0x3ff,
-+ M_BKE_GP_GP_BMSK = 0x3ff,
-+ M_BKE_GP_GP_SHFT = 0x0,
-+};
-+
-+/* Grant count register.
-+ * The Grant count register represents a signed 16 bit
-+ * value, range 0-0x7fff
-+ */
-+#define M_BKE_GC_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000308)
-+enum bimc_m_bke_grant_count {
-+ M_BKE_GC_RMSK = 0xffff,
-+ M_BKE_GC_GC_BMSK = 0xffff,
-+ M_BKE_GC_GC_SHFT = 0x0,
-+};
-+
-+/* Threshold High Registers */
-+#define M_BKE_THH_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000320)
-+enum bimc_m_bke_thresh_high {
-+ M_BKE_THH_RMSK = 0xffff,
-+ M_BKE_THH_THRESH_BMSK = 0xffff,
-+ M_BKE_THH_THRESH_SHFT = 0x0,
-+};
-+
-+/* Threshold Medium Registers */
-+#define M_BKE_THM_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000324)
-+enum bimc_m_bke_thresh_medium {
-+ M_BKE_THM_RMSK = 0xffff,
-+ M_BKE_THM_THRESH_BMSK = 0xffff,
-+ M_BKE_THM_THRESH_SHFT = 0x0,
-+};
-+
-+/* Threshold Low Registers */
-+#define M_BKE_THL_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000328)
-+enum bimc_m_bke_thresh_low {
-+ M_BKE_THL_RMSK = 0xffff,
-+ M_BKE_THL_THRESH_BMSK = 0xffff,
-+ M_BKE_THL_THRESH_SHFT = 0x0,
-+};
-+
-+#define M_BKE_HEALTH_0_CONFIG_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000340)
-+enum bimc_m_bke_health_0 {
-+ M_BKE_HEALTH_0_CONFIG_RMSK = 0x80000303,
-+ M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK = 0x80000000,
-+ M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_SHFT = 0x1f,
-+ M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK = 0x300,
-+ M_BKE_HEALTH_0_CONFIG_AREQPRIO_SHFT = 0x8,
-+ M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK = 0x3,
-+ M_BKE_HEALTH_0_CONFIG_PRIOLVL_SHFT = 0x0,
-+};
-+
-+#define M_BKE_HEALTH_1_CONFIG_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000344)
-+enum bimc_m_bke_health_1 {
-+ M_BKE_HEALTH_1_CONFIG_RMSK = 0x80000303,
-+ M_BKE_HEALTH_1_CONFIG_LIMIT_CMDS_BMSK = 0x80000000,
-+ M_BKE_HEALTH_1_CONFIG_LIMIT_CMDS_SHFT = 0x1f,
-+ M_BKE_HEALTH_1_CONFIG_AREQPRIO_BMSK = 0x300,
-+ M_BKE_HEALTH_1_CONFIG_AREQPRIO_SHFT = 0x8,
-+ M_BKE_HEALTH_1_CONFIG_PRIOLVL_BMSK = 0x3,
-+ M_BKE_HEALTH_1_CONFIG_PRIOLVL_SHFT = 0x0,
-+};
-+
-+#define M_BKE_HEALTH_2_CONFIG_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000348)
-+enum bimc_m_bke_health_2 {
-+ M_BKE_HEALTH_2_CONFIG_RMSK = 0x80000303,
-+ M_BKE_HEALTH_2_CONFIG_LIMIT_CMDS_BMSK = 0x80000000,
-+ M_BKE_HEALTH_2_CONFIG_LIMIT_CMDS_SHFT = 0x1f,
-+ M_BKE_HEALTH_2_CONFIG_AREQPRIO_BMSK = 0x300,
-+ M_BKE_HEALTH_2_CONFIG_AREQPRIO_SHFT = 0x8,
-+ M_BKE_HEALTH_2_CONFIG_PRIOLVL_BMSK = 0x3,
-+ M_BKE_HEALTH_2_CONFIG_PRIOLVL_SHFT = 0x0,
-+};
-+
-+#define M_BKE_HEALTH_3_CONFIG_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x0000034c)
-+enum bimc_m_bke_health_3 {
-+ M_BKE_HEALTH_3_CONFIG_RMSK = 0x303,
-+ M_BKE_HEALTH_3_CONFIG_AREQPRIO_BMSK = 0x300,
-+ M_BKE_HEALTH_3_CONFIG_AREQPRIO_SHFT = 0x8,
-+ M_BKE_HEALTH_3_CONFIG_PRIOLVL_BMSK = 0x3,
-+ M_BKE_HEALTH_3_CONFIG_PRIOLVL_SHFT = 0x0,
-+};
-+
-+#define M_BUF_STATUS_ADDR(b, n) \
-+ (M_REG_BASE(b) + (0x4000 * (n)) + 0x00000400)
-+enum bimc_m_buf_status {
-+ M_BUF_STATUS_RMSK = 0xf03f030,
-+ M_BUF_STATUS_RCH_DATA_WR_FULL_BMSK = 0x8000000,
-+ M_BUF_STATUS_RCH_DATA_WR_FULL_SHFT = 0x1b,
-+ M_BUF_STATUS_RCH_DATA_WR_EMPTY_BMSK = 0x4000000,
-+ M_BUF_STATUS_RCH_DATA_WR_EMPTY_SHFT = 0x1a,
-+ M_BUF_STATUS_RCH_CTRL_WR_FULL_BMSK = 0x2000000,
-+ M_BUF_STATUS_RCH_CTRL_WR_FULL_SHFT = 0x19,
-+ M_BUF_STATUS_RCH_CTRL_WR_EMPTY_BMSK = 0x1000000,
-+ M_BUF_STATUS_RCH_CTRL_WR_EMPTY_SHFT = 0x18,
-+ M_BUF_STATUS_BCH_WR_FULL_BMSK = 0x20000,
-+ M_BUF_STATUS_BCH_WR_FULL_SHFT = 0x11,
-+ M_BUF_STATUS_BCH_WR_EMPTY_BMSK = 0x10000,
-+ M_BUF_STATUS_BCH_WR_EMPTY_SHFT = 0x10,
-+ M_BUF_STATUS_WCH_DATA_RD_FULL_BMSK = 0x8000,
-+ M_BUF_STATUS_WCH_DATA_RD_FULL_SHFT = 0xf,
-+ M_BUF_STATUS_WCH_DATA_RD_EMPTY_BMSK = 0x4000,
-+ M_BUF_STATUS_WCH_DATA_RD_EMPTY_SHFT = 0xe,
-+ M_BUF_STATUS_WCH_CTRL_RD_FULL_BMSK = 0x2000,
-+ M_BUF_STATUS_WCH_CTRL_RD_FULL_SHFT = 0xd,
-+ M_BUF_STATUS_WCH_CTRL_RD_EMPTY_BMSK = 0x1000,
-+ M_BUF_STATUS_WCH_CTRL_RD_EMPTY_SHFT = 0xc,
-+ M_BUF_STATUS_ACH_RD_FULL_BMSK = 0x20,
-+ M_BUF_STATUS_ACH_RD_FULL_SHFT = 0x5,
-+ M_BUF_STATUS_ACH_RD_EMPTY_BMSK = 0x10,
-+ M_BUF_STATUS_ACH_RD_EMPTY_SHFT = 0x4,
-+};
-+/*BIMC Generic */
-+
-+#define S_REG_BASE(b) ((b) + 0x00048000)
-+
-+#define S_COMPONENT_INFO_ADDR(b, n) \
-+ (S_REG_BASE(b) + (0x8000 * (n)) + 0x00000000)
-+enum bimc_s_component_info {
-+ S_COMPONENT_INFO_RMSK = 0xffffff,
-+ S_COMPONENT_INFO_INSTANCE_BMSK = 0xff0000,
-+ S_COMPONENT_INFO_INSTANCE_SHFT = 0x10,
-+ S_COMPONENT_INFO_SUB_TYPE_BMSK = 0xff00,
-+ S_COMPONENT_INFO_SUB_TYPE_SHFT = 0x8,
-+ S_COMPONENT_INFO_TYPE_BMSK = 0xff,
-+ S_COMPONENT_INFO_TYPE_SHFT = 0x0,
-+};
-+
-+#define S_HW_INFO_ADDR(b, n) \
-+ (S_REG_BASE(b) + (0x80000 * (n)) + 0x00000010)
-+enum bimc_s_hw_info {
-+ S_HW_INFO_RMSK = 0xffffffff,
-+ S_HW_INFO_MAJOR_BMSK = 0xff000000,
-+ S_HW_INFO_MAJOR_SHFT = 0x18,
-+ S_HW_INFO_BRANCH_BMSK = 0xff0000,
-+ S_HW_INFO_BRANCH_SHFT = 0x10,
-+ S_HW_INFO_MINOR_BMSK = 0xff00,
-+ S_HW_INFO_MINOR_SHFT = 0x8,
-+ S_HW_INFO_ECO_BMSK = 0xff,
-+ S_HW_INFO_ECO_SHFT = 0x0,
-+};
-+
-+
-+/* S_SCMO_GENERIC */
-+
-+#define S_SCMO_REG_BASE(b) ((b) + 0x00048000)
-+
-+#define S_SCMO_CONFIG_INFO_0_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000020)
-+enum bimc_s_scmo_config_info_0 {
-+ S_SCMO_CONFIG_INFO_0_RMSK = 0xffffffff,
-+ S_SCMO_CONFIG_INFO_0_DATA_WIDTH_BMSK = 0xffff0000,
-+ S_SCMO_CONFIG_INFO_0_DATA_WIDTH_SHFT = 0x10,
-+ S_SCMO_CONFIG_INFO_0_TID_WIDTH_BMSK = 0xff00,
-+ S_SCMO_CONFIG_INFO_0_TID_WIDTH_SHFT = 0x8,
-+ S_SCMO_CONFIG_INFO_0_MID_WIDTH_BMSK = 0xff,
-+ S_SCMO_CONFIG_INFO_0_MID_WIDTH_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_CONFIG_INFO_1_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000030)
-+enum bimc_s_scmo_config_info_1 {
-+ S_SCMO_CONFIG_INFO_1_RMSK = 0xffffffff,
-+ S_SCMO_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK = 0xffffffff,
-+ S_SCMO_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_CONFIG_INFO_2_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000040)
-+enum bimc_s_scmo_config_info_2 {
-+ S_SCMO_CONFIG_INFO_2_RMSK = 0xff00ff,
-+ S_SCMO_CONFIG_INFO_2_NUM_GLOBAL_MONS_BMSK = 0xff0000,
-+ S_SCMO_CONFIG_INFO_2_NUM_GLOBAL_MONS_SHFT = 0x10,
-+ S_SCMO_CONFIG_INFO_2_VMID_WIDTH_BMSK = 0xff,
-+ S_SCMO_CONFIG_INFO_2_VMID_WIDTH_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_CONFIG_INFO_3_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000050)
-+enum bimc_s_scmo_config_info_3 {
-+ S_SCMO_CONFIG_INFO_3_RMSK = 0xffffffff,
-+ S_SCMO_CONFIG_INFO_3_RCH0_CTRL_DEPTH_BMSK = 0xff000000,
-+ S_SCMO_CONFIG_INFO_3_RCH0_CTRL_DEPTH_SHFT = 0x18,
-+ S_SCMO_CONFIG_INFO_3_RCH0_DEPTH_BMSK = 0xff0000,
-+ S_SCMO_CONFIG_INFO_3_RCH0_DEPTH_SHFT = 0x10,
-+ S_SCMO_CONFIG_INFO_3_BCH_DEPTH_BMSK = 0xff00,
-+ S_SCMO_CONFIG_INFO_3_BCH_DEPTH_SHFT = 0x8,
-+ S_SCMO_CONFIG_INFO_3_WCH_DEPTH_BMSK = 0xff,
-+ S_SCMO_CONFIG_INFO_3_WCH_DEPTH_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_CONFIG_INFO_4_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000060)
-+enum bimc_s_scmo_config_info_4 {
-+ S_SCMO_CONFIG_INFO_4_RMSK = 0xffff,
-+ S_SCMO_CONFIG_INFO_4_RCH1_CTRL_DEPTH_BMSK = 0xff00,
-+ S_SCMO_CONFIG_INFO_4_RCH1_CTRL_DEPTH_SHFT = 0x8,
-+ S_SCMO_CONFIG_INFO_4_RCH1_DEPTH_BMSK = 0xff,
-+ S_SCMO_CONFIG_INFO_4_RCH1_DEPTH_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_CONFIG_INFO_5_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000070)
-+enum bimc_s_scmo_config_info_5 {
-+ S_SCMO_CONFIG_INFO_5_RMSK = 0xffff,
-+ S_SCMO_CONFIG_INFO_5_DPE_CQ_DEPTH_BMSK = 0xff00,
-+ S_SCMO_CONFIG_INFO_5_DPE_CQ_DEPTH_SHFT = 0x8,
-+ S_SCMO_CONFIG_INFO_5_DDR_BUS_WIDTH_BMSK = 0xff,
-+ S_SCMO_CONFIG_INFO_5_DDR_BUS_WIDTH_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_CONFIG_INFO_6_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000080)
-+enum bimc_s_scmo_config_info_6 {
-+ S_SCMO_CONFIG_INFO_6_RMSK = 0x1111,
-+ S_SCMO_CONFIG_INFO_6_WBUFC_PIPE_BMSK = 0x1000,
-+ S_SCMO_CONFIG_INFO_6_WBUFC_PIPE_SHFT = 0xc,
-+ S_SCMO_CONFIG_INFO_6_RDOPT_PIPE_BMSK = 0x100,
-+ S_SCMO_CONFIG_INFO_6_RDOPT_PIPE_SHFT = 0x8,
-+ S_SCMO_CONFIG_INFO_6_ACHAN_INTF_PIPE_BMSK = 0x10,
-+ S_SCMO_CONFIG_INFO_6_ACHAN_INTF_PIPE_SHFT = 0x4,
-+ S_SCMO_CONFIG_INFO_6_ADDR_DECODE_HT_BMSK = 0x1,
-+ S_SCMO_CONFIG_INFO_6_ADDR_DECODE_HT_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_INT_STATUS_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000100)
-+enum bimc_s_scmo_int_status {
-+ S_SCMO_INT_STATUS_RMSK = 0x1,
-+ S_SCMO_INT_STATUS_ERR_OCCURED_BMSK = 0x1,
-+ S_SCMO_INT_STATUS_ERR_OCCURED_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_INT_CLR_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000108)
-+enum bimc_s_scmo_int_clr {
-+ S_SCMO_INT_CLR_RMSK = 0x1,
-+ S_SCMO_INT_CLR_IRQ_CLR_BMSK = 0x1,
-+ S_SCMO_INT_CLR_IRQ_CLR_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_INT_EN_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000010c)
-+enum bimc_s_scmo_int_en {
-+ S_SCMO_INT_EN_RMSK = 0x1,
-+ S_SCMO_INT_EN_IRQ_EN_BMSK = 0x1,
-+ S_SCMO_INT_EN_IRQ_EN_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_ESYN_ADDR_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000120)
-+enum bimc_s_scmo_esyn_addr {
-+ S_SCMO_ESYN_ADDR_RMSK = 0xffffffff,
-+ S_SCMO_ESYN_ADDR_ESYN_ADDR_ERR_ADDR_BMSK = 0xffffffff,
-+ S_SCMO_ESYN_ADDR_ESYN_ADDR_ERR_ADDR_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_ESYN_APACKET_0_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000128)
-+enum bimc_s_scmo_esyn_apacket_0 {
-+ S_SCMO_ESYN_APACKET_0_RMSK = 0xff1fffff,
-+ S_SCMO_ESYN_APACKET_0_ERR_ATID_BMSK = 0xff000000,
-+ S_SCMO_ESYN_APACKET_0_ERR_ATID_SHFT = 0x18,
-+ S_SCMO_ESYN_APACKET_0_ERR_AVMID_BMSK = 0x1f0000,
-+ S_SCMO_ESYN_APACKET_0_ERR_AVMID_SHFT = 0x10,
-+ S_SCMO_ESYN_APACKET_0_ERR_AMID_BMSK = 0xffff,
-+ S_SCMO_ESYN_APACKET_0_ERR_AMID_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_ESYN_APACKET_1_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000012c)
-+enum bimc_s_scmo_esyn_apacket_1 {
-+ S_SCMO_ESYN_APACKET_1_RMSK = 0x10ff117,
-+ S_SCMO_ESYN_APACKET_1_ERR_CODE_BMSK = 0x1000000,
-+ S_SCMO_ESYN_APACKET_1_ERR_CODE_SHFT = 0x18,
-+ S_SCMO_ESYN_APACKET_1_ERR_ALEN_BMSK = 0xf0000,
-+ S_SCMO_ESYN_APACKET_1_ERR_ALEN_SHFT = 0x10,
-+ S_SCMO_ESYN_APACKET_1_ERR_ASIZE_BMSK = 0xe000,
-+ S_SCMO_ESYN_APACKET_1_ERR_ASIZE_SHFT = 0xd,
-+ S_SCMO_ESYN_APACKET_1_ERR_ABURST_BMSK = 0x1000,
-+ S_SCMO_ESYN_APACKET_1_ERR_ABURST_SHFT = 0xc,
-+ S_SCMO_ESYN_APACKET_1_ERR_AEXCLUSIVE_BMSK = 0x100,
-+ S_SCMO_ESYN_APACKET_1_ERR_AEXCLUSIVE_SHFT = 0x8,
-+ S_SCMO_ESYN_APACKET_1_ERR_APRONTS_BMSK = 0x10,
-+ S_SCMO_ESYN_APACKET_1_ERR_APRONTS_SHFT = 0x4,
-+ S_SCMO_ESYN_APACKET_1_ERR_AOOORD_BMSK = 0x4,
-+ S_SCMO_ESYN_APACKET_1_ERR_AOOORD_SHFT = 0x2,
-+ S_SCMO_ESYN_APACKET_1_ERR_AOOOWR_BMSK = 0x2,
-+ S_SCMO_ESYN_APACKET_1_ERR_AOOOWR_SHFT = 0x1,
-+ S_SCMO_ESYN_APACKET_1_ERR_AWRITE_BMSK = 0x1,
-+ S_SCMO_ESYN_APACKET_1_ERR_AWRITE_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_CLK_CTRL_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000200)
-+enum bimc_s_scmo_clk_ctrl {
-+ S_SCMO_CLK_CTRL_RMSK = 0xffff1111,
-+ S_SCMO_CLK_CTRL_PEN_CMD_CG_EN_BMSK = 0x10000,
-+ S_SCMO_CLK_CTRL_PEN_CMD_CG_EN_SHFT = 0x10,
-+ S_SCMO_CLK_CTRL_RCH_CG_EN_BMSK = 0x1000,
-+ S_SCMO_CLK_CTRL_RCH_CG_EN_SHFT = 0xc,
-+ S_SCMO_CLK_CTRL_FLUSH_CG_EN_BMSK = 0x100,
-+ S_SCMO_CLK_CTRL_FLUSH_CG_EN_SHFT = 0x8,
-+ S_SCMO_CLK_CTRL_WCH_CG_EN_BMSK = 0x10,
-+ S_SCMO_CLK_CTRL_WCH_CG_EN_SHFT = 0x4,
-+ S_SCMO_CLK_CTRL_ACH_CG_EN_BMSK = 0x1,
-+ S_SCMO_CLK_CTRL_ACH_CG_EN_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_SLV_INTERLEAVE_CFG_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000400)
-+enum bimc_s_scmo_slv_interleave_cfg {
-+ S_SCMO_SLV_INTERLEAVE_CFG_RMSK = 0xff,
-+ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS1_BMSK = 0x10,
-+ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS1_SHFT = 0x4,
-+ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS0_BMSK = 0x1,
-+ S_SCMO_SLV_INTERLEAVE_CFG_INTERLEAVE_CS0_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_ADDR_BASE_CSn_ADDR(b, n, o) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000410 + 0x4 * (o))
-+enum bimc_s_scmo_addr_base_csn {
-+ S_SCMO_ADDR_BASE_CSn_RMSK = 0xffff,
-+ S_SCMO_ADDR_BASE_CSn_MAXn = 1,
-+ S_SCMO_ADDR_BASE_CSn_ADDR_BASE_BMSK = 0xfc,
-+ S_SCMO_ADDR_BASE_CSn_ADDR_BASE_SHFT = 0x2,
-+};
-+
-+#define S_SCMO_ADDR_MAP_CSn_ADDR(b, n, o) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000420 + 0x4 * (o))
-+enum bimc_s_scmo_addr_map_csn {
-+ S_SCMO_ADDR_MAP_CSn_RMSK = 0xffff,
-+ S_SCMO_ADDR_MAP_CSn_MAXn = 1,
-+ S_SCMO_ADDR_MAP_CSn_RANK_EN_BMSK = 0x8000,
-+ S_SCMO_ADDR_MAP_CSn_RANK_EN_SHFT = 0xf,
-+ S_SCMO_ADDR_MAP_CSn_ADDR_MODE_BMSK = 0x1000,
-+ S_SCMO_ADDR_MAP_CSn_ADDR_MODE_SHFT = 0xc,
-+ S_SCMO_ADDR_MAP_CSn_BANK_SIZE_BMSK = 0x100,
-+ S_SCMO_ADDR_MAP_CSn_BANK_SIZE_SHFT = 0x8,
-+ S_SCMO_ADDR_MAP_CSn_ROW_SIZE_BMSK = 0x30,
-+ S_SCMO_ADDR_MAP_CSn_ROW_SIZE_SHFT = 0x4,
-+ S_SCMO_ADDR_MAP_CSn_COL_SIZE_BMSK = 0x3,
-+ S_SCMO_ADDR_MAP_CSn_COL_SIZE_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_ADDR_MASK_CSn_ADDR(b, n, o) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000430 + 0x4 * (0))
-+enum bimc_s_scmo_addr_mask_csn {
-+ S_SCMO_ADDR_MASK_CSn_RMSK = 0xffff,
-+ S_SCMO_ADDR_MASK_CSn_MAXn = 1,
-+ S_SCMO_ADDR_MASK_CSn_ADDR_MASK_BMSK = 0xfc,
-+ S_SCMO_ADDR_MASK_CSn_ADDR_MASK_SHFT = 0x2,
-+};
-+
-+#define S_SCMO_SLV_STATUS_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000450)
-+enum bimc_s_scmo_slv_status {
-+ S_SCMO_SLV_STATUS_RMSK = 0xff3,
-+ S_SCMO_SLV_STATUS_GLOBAL_MONS_IN_USE_BMSK = 0xff0,
-+ S_SCMO_SLV_STATUS_GLOBAL_MONS_IN_USE_SHFT = 0x4,
-+ S_SCMO_SLV_STATUS_SLAVE_IDLE_BMSK = 0x3,
-+ S_SCMO_SLV_STATUS_SLAVE_IDLE_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_CMD_BUF_CFG_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000500)
-+enum bimc_s_scmo_cmd_buf_cfg {
-+ S_SCMO_CMD_BUF_CFG_RMSK = 0xf1f,
-+ S_SCMO_CMD_BUF_CFG_CMD_ORDERING_BMSK = 0x300,
-+ S_SCMO_CMD_BUF_CFG_CMD_ORDERING_SHFT = 0x8,
-+ S_SCMO_CMD_BUF_CFG_HP_CMD_AREQPRIO_MAP_BMSK = 0x10,
-+ S_SCMO_CMD_BUF_CFG_HP_CMD_AREQPRIO_MAP_SHFT = 0x4,
-+ S_SCMO_CMD_BUF_CFG_HP_CMD_Q_DEPTH_BMSK = 0x7,
-+ S_SCMO_CMD_BUF_CFG_HP_CMD_Q_DEPTH_SHFT = 0x0,
-+};
-+
-+#define S_SCM_CMD_BUF_STATUS_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000520)
-+enum bimc_s_scm_cmd_buf_status {
-+ S_SCMO_CMD_BUF_STATUS_RMSK = 0x77,
-+ S_SCMO_CMD_BUF_STATUS_HP_CMD_BUF_ENTRIES_IN_USE_BMSK = 0x70,
-+ S_SCMO_CMD_BUF_STATUS_HP_CMD_BUF_ENTRIES_IN_USE_SHFT = 0x4,
-+ S_SCMO_CMD_BUF_STATUS_LP_CMD_BUF_ENTRIES_IN_USE_BMSK = 0x7,
-+ S_SCMO_CMD_BUF_STATUS_LP_CMD_BUF_ENTRIES_IN_USE_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_RCH_SEL_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000540)
-+enum bimc_s_scmo_rch_sel {
-+ S_SCMO_RCH_SEL_RMSK = 0xffffffff,
-+ S_SCMO_CMD_BUF_STATUS_RCH_PORTS_BMSK = 0xffffffff,
-+ S_SCMO_CMD_BUF_STATUS_RCH_PORTS_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_RCH_BKPR_CFG_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000544)
-+enum bimc_s_scmo_rch_bkpr_cfg {
-+ S_SCMO_RCH_BKPR_CFG_RMSK = 0xffffffff,
-+ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_HI_TH_BMSK = 0x3f000000,
-+ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_HI_TH_SHFT = 0x18,
-+ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_LO_TH_BMSK = 0x3f0000,
-+ S_SCMO_RCH_BKPR_CFG_RCH1_FIFO_BKPR_LO_TH_SHFT = 0x10,
-+ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_HI_TH_BMSK = 0x3f00,
-+ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_HI_TH_SHFT = 0x8,
-+ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_LO_TH_BMSK = 0x3f,
-+ S_SCMO_RCH_BKPR_CFG_RCH0_FIFO_BKPR_LO_TH_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_RCH_STATUS_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000560)
-+enum bimc_s_scmo_rch_status {
-+ S_SCMO_RCH_STATUS_RMSK = 0x33333,
-+ S_SCMO_RCH_STATUS_PRQ_FIFO_FULL_BMSK = 0x20000,
-+ S_SCMO_RCH_STATUS_PRQ_FIFO_FULL_SHFT = 0x11,
-+ S_SCMO_RCH_STATUS_PRQ_FIFO_EMPTY_BMSK = 0x10000,
-+ S_SCMO_RCH_STATUS_PRQ_FIFO_EMPTY_SHFT = 0x10,
-+ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_FULL_BMSK = 0x2000,
-+ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_FULL_SHFT = 0xd,
-+ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_EMPTY_BMSK = 0x1000,
-+ S_SCMO_RCH_STATUS_RCH1_QUAL_FIFO_EMPTY_SHFT = 0xc,
-+ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_FULL_BMSK = 0x200,
-+ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_FULL_SHFT = 0x9,
-+ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_EMPTY_BMSK = 0x100,
-+ S_SCMO_RCH_STATUS_RCH1_DATA_FIFO_EMPTY_SHFT = 0x8,
-+ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_FULL_BMSK = 0x20,
-+ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_FULL_SHFT = 0x5,
-+ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_EMPTY_BMSK = 0x10,
-+ S_SCMO_RCH_STATUS_RCH0_QUAL_FIFO_EMPTY_SHFT = 0x4,
-+ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_FULL_BMSK = 0x2,
-+ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_FULL_SHFT = 0x1,
-+ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_EMPTY_BMSK = 0x1,
-+ S_SCMO_RCH_STATUS_RCH0_DATA_FIFO_EMPTY_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_WCH_BUF_CFG_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000580)
-+enum bimc_s_scmo_wch_buf_cfg {
-+ S_SCMO_WCH_BUF_CFG_RMSK = 0xff,
-+ S_SCMO_WCH_BUF_CFG_WRITE_BLOCK_READ_BMSK = 0x10,
-+ S_SCMO_WCH_BUF_CFG_WRITE_BLOCK_READ_SHFT = 0x4,
-+ S_SCMO_WCH_BUF_CFG_COALESCE_EN_BMSK = 0x1,
-+ S_SCMO_WCH_BUF_CFG_COALESCE_EN_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_WCH_STATUS_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005a0)
-+enum bimc_s_scmo_wch_status {
-+ S_SCMO_WCH_STATUS_RMSK = 0x333,
-+ S_SCMO_WCH_STATUS_BRESP_FIFO_FULL_BMSK = 0x200,
-+ S_SCMO_WCH_STATUS_BRESP_FIFO_FULL_SHFT = 0x9,
-+ S_SCMO_WCH_STATUS_BRESP_FIFO_EMPTY_BMSK = 0x100,
-+ S_SCMO_WCH_STATUS_BRESP_FIFO_EMPTY_SHFT = 0x8,
-+ S_SCMO_WCH_STATUS_WDATA_FIFO_FULL_BMSK = 0x20,
-+ S_SCMO_WCH_STATUS_WDATA_FIFO_FULL_SHFT = 0x5,
-+ S_SCMO_WCH_STATUS_WDATA_FIFO_EMPTY_BMSK = 0x10,
-+ S_SCMO_WCH_STATUS_WDATA_FIFO_EMPTY_SHFT = 0x4,
-+ S_SCMO_WCH_STATUS_WBUF_FULL_BMSK = 0x2,
-+ S_SCMO_WCH_STATUS_WBUF_FULL_SHFT = 0x1,
-+ S_SCMO_WCH_STATUS_WBUF_EMPTY_BMSK = 0x1,
-+ S_SCMO_WCH_STATUS_WBUF_EMPTY_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_FLUSH_CFG_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005c0)
-+enum bimc_s_scmo_flush_cfg {
-+ S_SCMO_FLUSH_CFG_RMSK = 0xffffffff,
-+ S_SCMO_FLUSH_CFG_FLUSH_IN_ORDER_BMSK = 0x10000000,
-+ S_SCMO_FLUSH_CFG_FLUSH_IN_ORDER_SHFT = 0x1c,
-+ S_SCMO_FLUSH_CFG_FLUSH_IDLE_DELAY_BMSK = 0x3ff0000,
-+ S_SCMO_FLUSH_CFG_FLUSH_IDLE_DELAY_SHFT = 0x10,
-+ S_SCMO_FLUSH_CFG_FLUSH_UPPER_LIMIT_BMSK = 0xf00,
-+ S_SCMO_FLUSH_CFG_FLUSH_UPPER_LIMIT_SHFT = 0x8,
-+ S_SCMO_FLUSH_CFG_FLUSH_LOWER_LIMIT_BMSK = 0xf,
-+ S_SCMO_FLUSH_CFG_FLUSH_LOWER_LIMIT_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_FLUSH_CMD_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x000005c4)
-+enum bimc_s_scmo_flush_cmd {
-+ S_SCMO_FLUSH_CMD_RMSK = 0xf,
-+ S_SCMO_FLUSH_CMD_FLUSH_ALL_BUF_BMSK = 0x3,
-+ S_SCMO_FLUSH_CMD_FLUSH_ALL_BUF_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_CMD_OPT_CFG0_ADDR(b, n) \
-+ (S_SCM0_REG_BASE(b) + (0x8000 * (n)) + 0x00000700)
-+enum bimc_s_scmo_cmd_opt_cfg0 {
-+ S_SCMO_CMD_OPT_CFG0_RMSK = 0xffffff,
-+ S_SCMO_CMD_OPT_CFG0_IGNORE_BANK_UNAVL_BMSK = 0x100000,
-+ S_SCMO_CMD_OPT_CFG0_IGNORE_BANK_UNAVL_SHFT = 0x14,
-+ S_SCMO_CMD_OPT_CFG0_MASK_CMDOUT_PRI_BMSK = 0x10000,
-+ S_SCMO_CMD_OPT_CFG0_MASK_CMDOUT_PRI_SHFT = 0x10,
-+ S_SCMO_CMD_OPT_CFG0_DPE_CMD_REORDERING_BMSK = 0x1000,
-+ S_SCMO_CMD_OPT_CFG0_DPE_CMD_REORDERING_SHFT = 0xc,
-+ S_SCMO_CMD_OPT_CFG0_WR_OPT_EN_BMSK = 0x100,
-+ S_SCMO_CMD_OPT_CFG0_WR_OPT_EN_SHFT = 0x8,
-+ S_SCMO_CMD_OPT_CFG0_RD_OPT_EN_BMSK = 0x10,
-+ S_SCMO_CMD_OPT_CFG0_RD_OPT_EN_SHFT = 0x4,
-+ S_SCMO_CMD_OPT_CFG0_PAGE_MGMT_POLICY_BMSK = 0x1,
-+ S_SCMO_CMD_OPT_CFG0_PAGE_MGMT_POLICY_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_CMD_OPT_CFG1_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000704)
-+enum bimc_s_scmo_cmd_opt_cfg1 {
-+ S_SCMO_CMD_OPT_CFG1_RMSK = 0xffffffff,
-+ S_SCMO_CMD_OPT_CFG1_HSTP_CMD_TIMEOUT_BMSK = 0x1f000000,
-+ S_SCMO_CMD_OPT_CFG1_HSTP_CMD_TIMEOUT_SHFT = 0x18,
-+ S_SCMO_CMD_OPT_CFG1_HP_CMD_TIMEOUT_BMSK = 0x1f0000,
-+ S_SCMO_CMD_OPT_CFG1_HP_CMD_TIMEOUT_SHFT = 0x10,
-+ S_SCMO_CMD_OPT_CFG1_MP_CMD_TIMEOUT_BMSK = 0x1f00,
-+ S_SCMO_CMD_OPT_CFG1_MP_CMD_TIMEOUT_SHFT = 0x8,
-+ S_SCMO_CMD_OPT_CFG1_LP_CMD_TIMEOUT_BMSK = 0x1f,
-+ S_SCMO_CMD_OPT_CFG1_LP_CMD_TIMEOUT_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_CMD_OPT_CFG2_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x00000708)
-+enum bimc_s_scmo_cmd_opt_cfg2 {
-+ S_SCMO_CMD_OPT_CFG2_RMSK = 0xff,
-+ S_SCMO_CMD_OPT_CFG2_RWOPT_CMD_TIMEOUT_BMSK = 0xf,
-+ S_SCMO_CMD_OPT_CFG2_RWOPT_CMD_TIMEOUT_SHFT = 0x0,
-+};
-+
-+#define S_SCMO_CMD_OPT_CFG3_ADDR(b, n) \
-+ (S_SCMO_REG_BASE(b) + (0x8000 * (n)) + 0x0000070c)
-+enum bimc_s_scmo_cmd_opt_cfg3 {
-+ S_SCMO_CMD_OPT_CFG3_RMSK = 0xff,
-+ S_SCMO_CMD_OPT_CFG3_FLUSH_CMD_TIMEOUT_BMSK = 0xf,
-+ S_SCMO_CMD_OPT_CFG3_FLUSH_CMD_TIMEOUT_SHFT = 0x0,
-+};
-+
-+/* S_SWAY_GENERIC */
-+#define S_SWAY_REG_BASE(b) ((b) + 0x00048000)
-+
-+#define S_SWAY_CONFIG_INFO_0_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000020)
-+enum bimc_s_sway_config_info_0 {
-+ S_SWAY_CONFIG_INFO_0_RMSK = 0xff0000ff,
-+ S_SWAY_CONFIG_INFO_0_SYNC_MODE_BMSK = 0xff000000,
-+ S_SWAY_CONFIG_INFO_0_SYNC_MODE_SHFT = 0x18,
-+ S_SWAY_CONFIG_INFO_0_FUNC_BMSK = 0xff,
-+ S_SWAY_CONFIG_INFO_0_FUNC_SHFT = 0x0,
-+};
-+
-+#define S_SWAY_CONFIG_INFO_1_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000030)
-+enum bimc_s_sway_config_info_1 {
-+ S_SWAY_CONFIG_INFO_1_RMSK = 0xffffffff,
-+ S_SWAY_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK = 0xffffffff,
-+ S_SWAY_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT = 0x0,
-+};
-+
-+#define S_SWAY_CONFIG_INFO_2_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000040)
-+enum bimc_s_sway_config_info_2 {
-+ S_SWAY_CONFIG_INFO_2_RMSK = 0xffff0000,
-+ S_SWAY_CONFIG_INFO_2_MPORT_CONNECTIVITY_BMSK = 0xffff0000,
-+ S_SWAY_CONFIG_INFO_2_MPORT_CONNECTIVITY_SHFT = 0x10,
-+};
-+
-+#define S_SWAY_CONFIG_INFO_3_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000050)
-+enum bimc_s_sway_config_info_3 {
-+ S_SWAY_CONFIG_INFO_3_RMSK = 0xffffffff,
-+ S_SWAY_CONFIG_INFO_3_RCH0_DEPTH_BMSK = 0xff000000,
-+ S_SWAY_CONFIG_INFO_3_RCH0_DEPTH_SHFT = 0x18,
-+ S_SWAY_CONFIG_INFO_3_BCH_DEPTH_BMSK = 0xff0000,
-+ S_SWAY_CONFIG_INFO_3_BCH_DEPTH_SHFT = 0x10,
-+ S_SWAY_CONFIG_INFO_3_WCH_DEPTH_BMSK = 0xff,
-+ S_SWAY_CONFIG_INFO_3_WCH_DEPTH_SHFT = 0x0,
-+};
-+
-+#define S_SWAY_CONFIG_INFO_4_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000060)
-+enum bimc_s_sway_config_info_4 {
-+ S_SWAY_CONFIG_INFO_4_RMSK = 0x800000ff,
-+ S_SWAY_CONFIG_INFO_4_DUAL_RCH_EN_BMSK = 0x80000000,
-+ S_SWAY_CONFIG_INFO_4_DUAL_RCH_EN_SHFT = 0x1f,
-+ S_SWAY_CONFIG_INFO_4_RCH1_DEPTH_BMSK = 0xff,
-+ S_SWAY_CONFIG_INFO_4_RCH1_DEPTH_SHFT = 0x0,
-+};
-+
-+#define S_SWAY_CONFIG_INFO_5_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000070)
-+enum bimc_s_sway_config_info_5 {
-+ S_SWAY_CONFIG_INFO_5_RMSK = 0x800000ff,
-+ S_SWAY_CONFIG_INFO_5_QCH_EN_BMSK = 0x80000000,
-+ S_SWAY_CONFIG_INFO_5_QCH_EN_SHFT = 0x1f,
-+ S_SWAY_CONFIG_INFO_5_QCH_DEPTH_BMSK = 0xff,
-+ S_SWAY_CONFIG_INFO_5_QCH_DEPTH_SHFT = 0x0,
-+};
-+
-+#define S_SWAY_CONFIG_INFO_6_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000080)
-+enum bimc_s_sway_config_info_6 {
-+ S_SWAY_CONFIG_INFO_6_RMSK = 0x1,
-+ S_SWAY_CONFIG_INFO_6_S2SW_PIPELINE_EN_BMSK = 0x1,
-+ S_SWAY_CONFIG_INFO_6_S2SW_PIPELINE_EN_SHFT = 0x0,
-+};
-+
-+#define S_SWAY_INT_STATUS_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000100)
-+enum bimc_s_sway_int_status {
-+ S_SWAY_INT_STATUS_RMSK = 0x3,
-+ S_SWAY_INT_STATUS_RFU_BMSK = 0x3,
-+ S_SWAY_INT_STATUS_RFU_SHFT = 0x0,
-+};
-+
-+#define S_SWAY_INT_CLR_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000108)
-+enum bimc_s_sway_int_clr {
-+ S_SWAY_INT_CLR_RMSK = 0x3,
-+ S_SWAY_INT_CLR_RFU_BMSK = 0x3,
-+ S_SWAY_INT_CLR_RFU_SHFT = 0x0,
-+};
-+
-+
-+#define S_SWAY_INT_EN_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x0000010c)
-+enum bimc_s_sway_int_en {
-+ S_SWAY_INT_EN_RMSK = 0x3,
-+ S_SWAY_INT_EN_RFU_BMSK = 0x3,
-+ S_SWAY_INT_EN_RFU_SHFT = 0x0,
-+};
-+
-+#define S_SWAY_CLK_CTRL_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000200)
-+enum bimc_s_sway_clk_ctrl {
-+ S_SWAY_CLK_CTRL_RMSK = 0x3,
-+ S_SWAY_CLK_CTRL_SLAVE_CLK_GATING_EN_BMSK = 0x2,
-+ S_SWAY_CLK_CTRL_SLAVE_CLK_GATING_EN_SHFT = 0x1,
-+ S_SWAY_CLK_CTRL_CORE_CLK_GATING_EN_BMSK = 0x1,
-+ S_SWAY_CLK_CTRL_CORE_CLK_GATING_EN_SHFT = 0x0,
-+};
-+
-+#define S_SWAY_RCH_SEL_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000210)
-+enum bimc_s_sway_rch_sel {
-+ S_SWAY_RCH_SEL_RMSK = 0x7f,
-+ S_SWAY_RCH_SEL_UNUSED_BMSK = 0x7f,
-+ S_SWAY_RCH_SEL_UNUSED_SHFT = 0x0,
-+};
-+
-+
-+#define S_SWAY_MAX_OUTSTANDING_REQS_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000220)
-+enum bimc_s_sway_max_outstanding_reqs {
-+ S_SWAY_MAX_OUTSTANDING_REQS_RMSK = 0xffff,
-+ S_SWAY_MAX_OUTSTANDING_REQS_WRITE_BMSK = 0xff00,
-+ S_SWAY_MAX_OUTSTANDING_REQS_WRITE_SHFT = 0x8,
-+ S_SWAY_MAX_OUTSTANDING_REQS_READ_BMSK = 0xff,
-+ S_SWAY_MAX_OUTSTANDING_REQS_READ_SHFT = 0x0,
-+};
-+
-+
-+#define S_SWAY_BUF_STATUS_0_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000400)
-+enum bimc_s_sway_buf_status_0 {
-+ S_SWAY_BUF_STATUS_0_RMSK = 0xf0300f03,
-+ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_FULL_BMSK = 0x80000000,
-+ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_FULL_SHFT = 0x1f,
-+ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_EMPTY_BMSK = 0x40000000,
-+ S_SWAY_BUF_STATUS_0_RCH0_DATA_RD_EMPTY_SHFT = 0x1e,
-+ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_FULL_BMSK = 0x20000000,
-+ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_FULL_SHFT = 0x1d,
-+ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_EMPTY_BMSK = 0x10000000,
-+ S_SWAY_BUF_STATUS_0_RCH0_CTRL_RD_EMPTY_SHFT = 0x1c,
-+ S_SWAY_BUF_STATUS_0_BCH_RD_FULL_BMSK = 0x200000,
-+ S_SWAY_BUF_STATUS_0_BCH_RD_FULL_SHFT = 0x15,
-+ S_SWAY_BUF_STATUS_0_BCH_RD_EMPTY_BMSK = 0x100000,
-+ S_SWAY_BUF_STATUS_0_BCH_RD_EMPTY_SHFT = 0x14,
-+ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_FULL_BMSK = 0x800,
-+ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_FULL_SHFT = 0xb,
-+ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_EMPTY_BMSK = 0x400,
-+ S_SWAY_BUF_STATUS_0_WCH_DATA_WR_EMPTY_SHFT = 0xa,
-+ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_FULL_BMSK = 0x200,
-+ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_FULL_SHFT = 0x9,
-+ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_EMPTY_BMSK = 0x100,
-+ S_SWAY_BUF_STATUS_0_WCH_CTRL_WR_EMPTY_SHFT = 0x8,
-+ S_SWAY_BUF_STATUS_0_ACH_WR_FULL_BMSK = 0x2,
-+ S_SWAY_BUF_STATUS_0_ACH_WR_FULL_SHFT = 0x1,
-+ S_SWAY_BUF_STATUS_0_ACH_WR_EMPTY_BMSK = 0x1,
-+ S_SWAY_BUF_STATUS_0_ACH_WR_EMPTY_SHFT = 0x0,
-+};
-+
-+#define S_SWAY_BUF_STATUS_1_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000410)
-+enum bimc_s_sway_buf_status_1 {
-+ S_SWAY_BUF_STATUS_1_RMSK = 0xf0,
-+ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_FULL_BMSK = 0x80,
-+ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_FULL_SHFT = 0x7,
-+ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_EMPTY_BMSK = 0x40,
-+ S_SWAY_BUF_STATUS_1_RCH1_DATA_RD_EMPTY_SHFT = 0x6,
-+ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_FULL_BMSK = 0x20,
-+ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_FULL_SHFT = 0x5,
-+ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_EMPTY_BMSK = 0x10,
-+ S_SWAY_BUF_STATUS_1_RCH1_CTRL_RD_EMPTY_SHFT = 0x4,
-+};
-+
-+#define S_SWAY_BUF_STATUS_2_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000420)
-+enum bimc_s_sway_buf_status_2 {
-+ S_SWAY_BUF_STATUS_2_RMSK = 0x30,
-+ S_SWAY_BUF_STATUS_2_QCH_RD_FULL_BMSK = 0x20,
-+ S_SWAY_BUF_STATUS_2_QCH_RD_FULL_SHFT = 0x5,
-+ S_SWAY_BUF_STATUS_2_QCH_RD_EMPTY_BMSK = 0x10,
-+ S_SWAY_BUF_STATUS_2_QCH_RD_EMPTY_SHFT = 0x4,
-+};
-+
-+/* S_ARB_GENERIC */
-+
-+#define S_ARB_REG_BASE(b) ((b) + 0x00049000)
-+
-+#define S_ARB_COMPONENT_INFO_ADDR(b, n) \
-+ (S_SWAY_REG_BASE(b) + (0x8000 * (n)) + 0x00000000)
-+enum bimc_s_arb_component_info {
-+ S_ARB_COMPONENT_INFO_RMSK = 0xffffff,
-+ S_ARB_COMPONENT_INFO_INSTANCE_BMSK = 0xff0000,
-+ S_ARB_COMPONENT_INFO_INSTANCE_SHFT = 0x10,
-+ S_ARB_COMPONENT_INFO_SUB_TYPE_BMSK = 0xff00,
-+ S_ARB_COMPONENT_INFO_SUB_TYPE_SHFT = 0x8,
-+ S_ARB_COMPONENT_INFO_TYPE_BMSK = 0xff,
-+ S_ARB_COMPONENT_INFO_TYPE_SHFT = 0x0,
-+};
-+
-+#define S_ARB_CONFIG_INFO_0_ADDR(b, n) \
-+ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000020)
-+enum bimc_s_arb_config_info_0 {
-+ S_ARB_CONFIG_INFO_0_RMSK = 0x800000ff,
-+ S_ARB_CONFIG_INFO_0_ARB2SW_PIPELINE_EN_BMSK = 0x80000000,
-+ S_ARB_CONFIG_INFO_0_ARB2SW_PIPELINE_EN_SHFT = 0x1f,
-+ S_ARB_CONFIG_INFO_0_FUNC_BMSK = 0xff,
-+ S_ARB_CONFIG_INFO_0_FUNC_SHFT = 0x0,
-+};
-+
-+#define S_ARB_CONFIG_INFO_1_ADDR(b, n) \
-+ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000030)
-+enum bimc_s_arb_config_info_1 {
-+ S_ARB_CONFIG_INFO_1_RMSK = 0xffffffff,
-+ S_ARB_CONFIG_INFO_1_MPORT_CONNECTIVITY_BMSK = 0xffffffff,
-+ S_ARB_CONFIG_INFO_1_MPORT_CONNECTIVITY_SHFT = 0x0,
-+};
-+
-+#define S_ARB_CLK_CTRL_ADDR(b) \
-+ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000200)
-+enum bimc_s_arb_clk_ctrl {
-+ S_ARB_CLK_CTRL_RMSK = 0x1,
-+ S_ARB_CLK_CTRL_SLAVE_CLK_GATING_EN_BMSK = 0x2,
-+ S_ARB_CLK_CTRL_SLAVE_CLK_GATING_EN_SHFT = 0x1,
-+ S_ARB_CLK_CTRL_CORE_CLK_GATING_EN_BMSK = 0x1,
-+ S_ARB_CLK_CTRL_CORE_CLK_GATING_EN_SHFT = 0x0,
-+ S_ARB_CLK_CTRL_CLK_GATING_EN_BMSK = 0x1,
-+ S_ARB_CLK_CTRL_CLK_GATING_EN_SHFT = 0x0,
-+};
-+
-+#define S_ARB_MODE_ADDR(b, n) \
-+ (S_ARB_REG_BASE(b) + (0x8000 * (n)) + 0x00000210)
-+enum bimc_s_arb_mode {
-+ S_ARB_MODE_RMSK = 0xf0000001,
-+ S_ARB_MODE_WR_GRANTS_AHEAD_BMSK = 0xf0000000,
-+ S_ARB_MODE_WR_GRANTS_AHEAD_SHFT = 0x1c,
-+ S_ARB_MODE_PRIO_RR_EN_BMSK = 0x1,
-+ S_ARB_MODE_PRIO_RR_EN_SHFT = 0x0,
-+};
-+
-+#define BKE_HEALTH_MASK \
-+ (M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK |\
-+ M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK |\
-+ M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK)
-+
-+#define BKE_HEALTH_VAL(limit, areq, plvl) \
-+ ((((limit) << M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_SHFT) & \
-+ M_BKE_HEALTH_0_CONFIG_LIMIT_CMDS_BMSK) | \
-+ (((areq) << M_BKE_HEALTH_0_CONFIG_AREQPRIO_SHFT) & \
-+ M_BKE_HEALTH_0_CONFIG_AREQPRIO_BMSK) | \
-+ (((plvl) << M_BKE_HEALTH_0_CONFIG_PRIOLVL_SHFT) & \
-+ M_BKE_HEALTH_0_CONFIG_PRIOLVL_BMSK))
-+
-+#define MAX_GRANT_PERIOD \
-+ (M_BKE_GP_GP_BMSK >> \
-+ M_BKE_GP_GP_SHFT)
-+
-+#define MAX_GC \
-+ (M_BKE_GC_GC_BMSK >> \
-+ (M_BKE_GC_GC_SHFT + 1))
-+
-+static int bimc_div(int64_t *a, uint32_t b)
-+{
-+ if ((*a > 0) && (*a < b)) {
-+ *a = 0;
-+ return 1;
-+ } else {
-+ return do_div(*a, b);
-+ }
-+}
-+
-+#define ENABLE(val) ((val) == 1 ? 1 : 0)
-+void msm_bus_bimc_set_mas_clk_gate(struct msm_bus_bimc_info *binfo,
-+ uint32_t mas_index, struct msm_bus_bimc_clk_gate *bgate)
-+{
-+ uint32_t val, mask, reg_val;
-+ void __iomem *addr;
-+
-+ reg_val = readl_relaxed(M_CLK_CTRL_ADDR(binfo->base,
-+ mas_index)) & M_CLK_CTRL_RMSK;
-+ addr = M_CLK_CTRL_ADDR(binfo->base, mas_index);
-+ mask = (M_CLK_CTRL_MAS_CLK_GATING_EN_BMSK |
-+ M_CLK_CTRL_CORE_CLK_GATING_EN_BMSK);
-+ val = (bgate->core_clk_gate_en <<
-+ M_CLK_CTRL_MAS_CLK_GATING_EN_SHFT) |
-+ bgate->port_clk_gate_en;
-+ writel_relaxed(((reg_val & (~mask)) | (val & mask)), addr);
-+ /* Ensure clock gating enable mask is set before exiting */
-+ wmb();
-+}
-+
-+void msm_bus_bimc_arb_en(struct msm_bus_bimc_info *binfo,
-+ uint32_t slv_index, bool en)
-+{
-+ uint32_t reg_val, reg_mask_val, enable, val;
-+
-+ reg_mask_val = (readl_relaxed(S_ARB_CONFIG_INFO_0_ADDR(binfo->
-+ base, slv_index)) & S_ARB_CONFIG_INFO_0_FUNC_BMSK)
-+ >> S_ARB_CONFIG_INFO_0_FUNC_SHFT;
-+ enable = ENABLE(en);
-+ val = enable << S_ARB_MODE_PRIO_RR_EN_SHFT;
-+ if (reg_mask_val == BIMC_ARB_MODE_PRIORITY_RR) {
-+ reg_val = readl_relaxed(S_ARB_CONFIG_INFO_0_ADDR(binfo->
-+ base, slv_index)) & S_ARB_MODE_RMSK;
-+ writel_relaxed(((reg_val & (~(S_ARB_MODE_PRIO_RR_EN_BMSK))) |
-+ (val & S_ARB_MODE_PRIO_RR_EN_BMSK)),
-+ S_ARB_MODE_ADDR(binfo->base, slv_index));
-+ /* Ensure arbitration mode is set before returning */
-+ wmb();
-+ }
-+}
-+
-+static void set_qos_mode(void __iomem *baddr, uint32_t index, uint32_t val0,
-+ uint32_t val1, uint32_t val2)
-+{
-+ uint32_t reg_val, val;
-+
-+ reg_val = readl_relaxed(M_PRIOLVL_OVERRIDE_ADDR(baddr,
-+ index)) & M_PRIOLVL_OVERRIDE_RMSK;
-+ val = val0 << M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_SHFT;
-+ writel_relaxed(((reg_val & ~(M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK))
-+ | (val & M_PRIOLVL_OVERRIDE_OVERRIDE_PRIOLVL_BMSK)),
-+ M_PRIOLVL_OVERRIDE_ADDR(baddr, index));
-+ reg_val = readl_relaxed(M_RD_CMD_OVERRIDE_ADDR(baddr, index)) &
-+ M_RD_CMD_OVERRIDE_RMSK;
-+ val = val1 << M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT;
-+ writel_relaxed(((reg_val & ~(M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK
-+ )) | (val & M_RD_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK)),
-+ M_RD_CMD_OVERRIDE_ADDR(baddr, index));
-+ reg_val = readl_relaxed(M_WR_CMD_OVERRIDE_ADDR(baddr, index)) &
-+ M_WR_CMD_OVERRIDE_RMSK;
-+ val = val2 << M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_SHFT;
-+ writel_relaxed(((reg_val & ~(M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK
-+ )) | (val & M_WR_CMD_OVERRIDE_OVERRIDE_AREQPRIO_BMSK)),
-+ M_WR_CMD_OVERRIDE_ADDR(baddr, index));
-+ /* Ensure the priority register writes go through */
-+ wmb();
-+}
-+
-+static void msm_bus_bimc_set_qos_mode(void __iomem *base,
-+ uint32_t mas_index, uint8_t qmode_sel)
-+{
-+ uint32_t reg_val, val;
-+
-+ switch (qmode_sel) {
-+ case BIMC_QOS_MODE_FIXED:
-+ reg_val = readl_relaxed(M_BKE_EN_ADDR(base,
-+ mas_index));
-+ writel_relaxed((reg_val & (~M_BKE_EN_EN_BMSK)),
-+ M_BKE_EN_ADDR(base, mas_index));
-+ /* Ensure that the book-keeping register writes
-+ * go through before setting QoS mode.
-+ * QoS mode registers might write beyond 1K
-+ * boundary in future
-+ */
-+ wmb();
-+ set_qos_mode(base, mas_index, 1, 1, 1);
-+ break;
-+
-+ case BIMC_QOS_MODE_BYPASS:
-+ reg_val = readl_relaxed(M_BKE_EN_ADDR(base,
-+ mas_index));
-+ writel_relaxed((reg_val & (~M_BKE_EN_EN_BMSK)),
-+ M_BKE_EN_ADDR(base, mas_index));
-+ /* Ensure that the book-keeping register writes
-+ * go through before setting QoS mode.
-+ * QoS mode registers might write beyond 1K
-+ * boundary in future
-+ */
-+ wmb();
-+ set_qos_mode(base, mas_index, 0, 0, 0);
-+ break;
-+
-+ case BIMC_QOS_MODE_REGULATOR:
-+ case BIMC_QOS_MODE_LIMITER:
-+ set_qos_mode(base, mas_index, 0, 0, 0);
-+ reg_val = readl_relaxed(M_BKE_EN_ADDR(base,
-+ mas_index));
-+ val = 1 << M_BKE_EN_EN_SHFT;
-+ /* Ensure that the book-keeping register writes
-+ * go through before setting QoS mode.
-+ * QoS mode registers might write beyond 1K
-+ * boundary in future
-+ */
-+ wmb();
-+ writel_relaxed(((reg_val & (~M_BKE_EN_EN_BMSK)) | (val &
-+ M_BKE_EN_EN_BMSK)), M_BKE_EN_ADDR(base,
-+ mas_index));
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+static void set_qos_prio_rl(void __iomem *addr, uint32_t rmsk,
-+ uint8_t index, struct msm_bus_bimc_qos_mode *qmode)
-+{
-+ uint32_t reg_val, val0, val;
-+
-+ /* Note, addr is already passed with right mas_index */
-+ reg_val = readl_relaxed(addr) & rmsk;
-+ val0 = BKE_HEALTH_VAL(qmode->rl.qhealth[index].limit_commands,
-+ qmode->rl.qhealth[index].areq_prio,
-+ qmode->rl.qhealth[index].prio_level);
-+ val = ((reg_val & (~(BKE_HEALTH_MASK))) | (val0 & BKE_HEALTH_MASK));
-+ writel_relaxed(val, addr);
-+ /* Ensure that priority for regulator/limiter modes are
-+ * set before returning
-+ */
-+ wmb();
-+
-+}
-+
-+static void msm_bus_bimc_set_qos_prio(void __iomem *base,
-+ uint32_t mas_index, uint8_t qmode_sel,
-+ struct msm_bus_bimc_qos_mode *qmode)
-+{
-+ uint32_t reg_val, val;
-+
-+ switch (qmode_sel) {
-+ case BIMC_QOS_MODE_FIXED:
-+ reg_val = readl_relaxed(M_PRIOLVL_OVERRIDE_ADDR(
-+ base, mas_index)) & M_PRIOLVL_OVERRIDE_RMSK;
-+ val = qmode->fixed.prio_level <<
-+ M_PRIOLVL_OVERRIDE_SHFT;
-+ writel_relaxed(((reg_val &
-+ ~(M_PRIOLVL_OVERRIDE_BMSK)) | (val
-+ & M_PRIOLVL_OVERRIDE_BMSK)),
-+ M_PRIOLVL_OVERRIDE_ADDR(base, mas_index));
-+
-+ reg_val = readl_relaxed(M_RD_CMD_OVERRIDE_ADDR(
-+ base, mas_index)) & M_RD_CMD_OVERRIDE_RMSK;
-+ val = qmode->fixed.areq_prio_rd <<
-+ M_RD_CMD_OVERRIDE_AREQPRIO_SHFT;
-+ writel_relaxed(((reg_val & ~(M_RD_CMD_OVERRIDE_AREQPRIO_BMSK))
-+ | (val & M_RD_CMD_OVERRIDE_AREQPRIO_BMSK)),
-+ M_RD_CMD_OVERRIDE_ADDR(base, mas_index));
-+
-+ reg_val = readl_relaxed(M_WR_CMD_OVERRIDE_ADDR(
-+ base, mas_index)) & M_WR_CMD_OVERRIDE_RMSK;
-+ val = qmode->fixed.areq_prio_wr <<
-+ M_WR_CMD_OVERRIDE_AREQPRIO_SHFT;
-+ writel_relaxed(((reg_val & ~(M_WR_CMD_OVERRIDE_AREQPRIO_BMSK))
-+ | (val & M_WR_CMD_OVERRIDE_AREQPRIO_BMSK)),
-+ M_WR_CMD_OVERRIDE_ADDR(base, mas_index));
-+ /* Ensure that fixed mode register writes go through
-+ * before returning
-+ */
-+ wmb();
-+ break;
-+
-+ case BIMC_QOS_MODE_REGULATOR:
-+ case BIMC_QOS_MODE_LIMITER:
-+ set_qos_prio_rl(M_BKE_HEALTH_3_CONFIG_ADDR(base,
-+ mas_index), M_BKE_HEALTH_3_CONFIG_RMSK, 3, qmode);
-+ set_qos_prio_rl(M_BKE_HEALTH_2_CONFIG_ADDR(base,
-+ mas_index), M_BKE_HEALTH_2_CONFIG_RMSK, 2, qmode);
-+ set_qos_prio_rl(M_BKE_HEALTH_1_CONFIG_ADDR(base,
-+ mas_index), M_BKE_HEALTH_1_CONFIG_RMSK, 1, qmode);
-+ set_qos_prio_rl(M_BKE_HEALTH_0_CONFIG_ADDR(base,
-+ mas_index), M_BKE_HEALTH_0_CONFIG_RMSK, 0 , qmode);
-+ break;
-+ case BIMC_QOS_MODE_BYPASS:
-+ default:
-+ break;
-+ }
-+}
-+
-+static void set_qos_bw_regs(void __iomem *baddr, uint32_t mas_index,
-+ int32_t th, int32_t tm, int32_t tl, uint32_t gp,
-+ uint32_t gc)
-+{
-+ int32_t reg_val, val;
-+ int32_t bke_reg_val;
-+ int16_t val2;
-+
-+ /* Disable BKE before writing to registers as per spec */
-+ bke_reg_val = readl_relaxed(M_BKE_EN_ADDR(baddr, mas_index));
-+ writel_relaxed((bke_reg_val & ~(M_BKE_EN_EN_BMSK)),
-+ M_BKE_EN_ADDR(baddr, mas_index));
-+
-+ /* Write values of registers calculated */
-+ reg_val = readl_relaxed(M_BKE_GP_ADDR(baddr, mas_index))
-+ & M_BKE_GP_RMSK;
-+ val = gp << M_BKE_GP_GP_SHFT;
-+ writel_relaxed(((reg_val & ~(M_BKE_GP_GP_BMSK)) | (val &
-+ M_BKE_GP_GP_BMSK)), M_BKE_GP_ADDR(baddr, mas_index));
-+
-+ reg_val = readl_relaxed(M_BKE_GC_ADDR(baddr, mas_index)) &
-+ M_BKE_GC_RMSK;
-+ val = gc << M_BKE_GC_GC_SHFT;
-+ writel_relaxed(((reg_val & ~(M_BKE_GC_GC_BMSK)) | (val &
-+ M_BKE_GC_GC_BMSK)), M_BKE_GC_ADDR(baddr, mas_index));
-+
-+ reg_val = readl_relaxed(M_BKE_THH_ADDR(baddr, mas_index)) &
-+ M_BKE_THH_RMSK;
-+ val = th << M_BKE_THH_THRESH_SHFT;
-+ writel_relaxed(((reg_val & ~(M_BKE_THH_THRESH_BMSK)) | (val &
-+ M_BKE_THH_THRESH_BMSK)), M_BKE_THH_ADDR(baddr, mas_index));
-+
-+ reg_val = readl_relaxed(M_BKE_THM_ADDR(baddr, mas_index)) &
-+ M_BKE_THM_RMSK;
-+ val2 = tm << M_BKE_THM_THRESH_SHFT;
-+ writel_relaxed(((reg_val & ~(M_BKE_THM_THRESH_BMSK)) | (val2 &
-+ M_BKE_THM_THRESH_BMSK)), M_BKE_THM_ADDR(baddr, mas_index));
-+
-+ reg_val = readl_relaxed(M_BKE_THL_ADDR(baddr, mas_index)) &
-+ M_BKE_THL_RMSK;
-+ val2 = tl << M_BKE_THL_THRESH_SHFT;
-+ writel_relaxed(((reg_val & ~(M_BKE_THL_THRESH_BMSK)) |
-+ (val2 & M_BKE_THL_THRESH_BMSK)), M_BKE_THL_ADDR(baddr,
-+ mas_index));
-+
-+ /* Ensure that all bandwidth register writes have completed
-+ * before returning
-+ */
-+ wmb();
-+}
-+
-+static void msm_bus_bimc_set_qos_bw(void __iomem *base, uint32_t qos_freq,
-+ uint32_t mas_index, struct msm_bus_bimc_qos_bw *qbw)
-+{
-+ uint32_t bke_en;
-+
-+ /* Validate QOS Frequency */
-+ if (qos_freq == 0) {
-+ MSM_BUS_DBG("Zero frequency\n");
-+ return;
-+ }
-+
-+ /* Get enable bit for BKE before programming the period */
-+ bke_en = (readl_relaxed(M_BKE_EN_ADDR(base, mas_index)) &
-+ M_BKE_EN_EN_BMSK) >> M_BKE_EN_EN_SHFT;
-+
-+ /* Only calculate if there's a requested bandwidth and window */
-+ if (qbw->bw && qbw->ws) {
-+ int64_t th, tm, tl;
-+ uint32_t gp, gc;
-+ int64_t gp_nominal, gp_required, gp_calc, data, temp;
-+ int64_t win = qbw->ws * qos_freq;
-+ temp = win;
-+ /*
-+ * Calculate nominal grant period defined by requested
-+ * window size.
-+ * Ceil this value to max grant period.
-+ */
-+ bimc_div(&temp, 1000000);
-+ gp_nominal = min_t(uint64_t, MAX_GRANT_PERIOD, temp);
-+ /*
-+ * Calculate max window size, defined by bw request.
-+ * Units: (KHz, MB/s)
-+ */
-+ gp_calc = MAX_GC * qos_freq * 1000;
-+ gp_required = gp_calc;
-+ bimc_div(&gp_required, qbw->bw);
-+
-+ /* User min of two grant periods */
-+ gp = min_t(int64_t, gp_nominal, gp_required);
-+
-+ /* Calculate bandwith in grants and ceil. */
-+ temp = qbw->bw * gp;
-+ data = qos_freq * 1000;
-+ bimc_div(&temp, data);
-+ gc = min_t(int64_t, MAX_GC, temp);
-+
-+ /* Calculate thresholds */
-+ th = qbw->bw - qbw->thh;
-+ tm = qbw->bw - qbw->thm;
-+ tl = qbw->bw - qbw->thl;
-+
-+ th = th * gp;
-+ bimc_div(&th, data);
-+ tm = tm * gp;
-+ bimc_div(&tm, data);
-+ tl = tl * gp;
-+ bimc_div(&tl, data);
-+
-+ MSM_BUS_DBG("BIMC: BW: mas_index: %d, th: %llu tm: %llu\n",
-+ mas_index, th, tm);
-+ MSM_BUS_DBG("BIMC: tl: %llu gp:%u gc: %u bke_en: %u\n",
-+ tl, gp, gc, bke_en);
-+ set_qos_bw_regs(base, mas_index, th, tm, tl, gp, gc);
-+ } else
-+ /* Clear bandwidth registers */
-+ set_qos_bw_regs(base, mas_index, 0, 0, 0, 0, 0);
-+}
-+
-+static int msm_bus_bimc_allocate_commit_data(struct msm_bus_fabric_registration
-+ *fab_pdata, void **cdata, int ctx)
-+{
-+ struct msm_bus_bimc_commit **cd = (struct msm_bus_bimc_commit **)cdata;
-+ struct msm_bus_bimc_info *binfo =
-+ (struct msm_bus_bimc_info *)fab_pdata->hw_data;
-+
-+ MSM_BUS_DBG("Allocating BIMC commit data\n");
-+ *cd = kzalloc(sizeof(struct msm_bus_bimc_commit), GFP_KERNEL);
-+ if (!*cd) {
-+ MSM_BUS_DBG("Couldn't alloc mem for cdata\n");
-+ return -ENOMEM;
-+ }
-+
-+ (*cd)->mas = binfo->cdata[ctx].mas;
-+ (*cd)->slv = binfo->cdata[ctx].slv;
-+
-+ return 0;
-+}
-+
-+static void *msm_bus_bimc_allocate_bimc_data(struct platform_device *pdev,
-+ struct msm_bus_fabric_registration *fab_pdata)
-+{
-+ struct resource *bimc_mem;
-+ struct resource *bimc_io;
-+ struct msm_bus_bimc_info *binfo;
-+ int i;
-+
-+ MSM_BUS_DBG("Allocating BIMC data\n");
-+ binfo = kzalloc(sizeof(struct msm_bus_bimc_info), GFP_KERNEL);
-+ if (!binfo) {
-+ WARN(!binfo, "Couldn't alloc mem for bimc_info\n");
-+ return NULL;
-+ }
-+
-+ binfo->qos_freq = fab_pdata->qos_freq;
-+
-+ binfo->params.nmasters = fab_pdata->nmasters;
-+ binfo->params.nslaves = fab_pdata->nslaves;
-+ binfo->params.bus_id = fab_pdata->id;
-+
-+ for (i = 0; i < NUM_CTX; i++) {
-+ binfo->cdata[i].mas = kzalloc(sizeof(struct
-+ msm_bus_node_hw_info) * fab_pdata->nmasters * 2,
-+ GFP_KERNEL);
-+ if (!binfo->cdata[i].mas) {
-+ MSM_BUS_ERR("Couldn't alloc mem for bimc master hw\n");
-+ kfree(binfo);
-+ return NULL;
-+ }
-+
-+ binfo->cdata[i].slv = kzalloc(sizeof(struct
-+ msm_bus_node_hw_info) * fab_pdata->nslaves * 2,
-+ GFP_KERNEL);
-+ if (!binfo->cdata[i].slv) {
-+ MSM_BUS_DBG("Couldn't alloc mem for bimc slave hw\n");
-+ kfree(binfo->cdata[i].mas);
-+ kfree(binfo);
-+ return NULL;
-+ }
-+ }
-+
-+ if (fab_pdata->virt) {
-+ MSM_BUS_DBG("Don't get memory regions for virtual fabric\n");
-+ goto skip_mem;
-+ }
-+
-+ bimc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!bimc_mem) {
-+ MSM_BUS_ERR("Cannot get BIMC Base address\n");
-+ kfree(binfo);
-+ return NULL;
-+ }
-+
-+ bimc_io = request_mem_region(bimc_mem->start,
-+ resource_size(bimc_mem), pdev->name);
-+ if (!bimc_io) {
-+ MSM_BUS_ERR("BIMC memory unavailable\n");
-+ kfree(binfo);
-+ return NULL;
-+ }
-+
-+ binfo->base = ioremap(bimc_mem->start, resource_size(bimc_mem));
-+ if (!binfo->base) {
-+ MSM_BUS_ERR("IOremap failed for BIMC!\n");
-+ release_mem_region(bimc_mem->start, resource_size(bimc_mem));
-+ kfree(binfo);
-+ return NULL;
-+ }
-+
-+skip_mem:
-+ fab_pdata->hw_data = (void *)binfo;
-+ return (void *)binfo;
-+}
-+
-+static void free_commit_data(void *cdata)
-+{
-+ struct msm_bus_bimc_commit *cd = (struct msm_bus_bimc_commit *)cdata;
-+
-+ kfree(cd->mas);
-+ kfree(cd->slv);
-+ kfree(cd);
-+}
-+
-+static void bke_switch(
-+ void __iomem *baddr, uint32_t mas_index, bool req, int mode)
-+{
-+ uint32_t reg_val, val, cur_val;
-+
-+ val = req << M_BKE_EN_EN_SHFT;
-+ reg_val = readl_relaxed(M_BKE_EN_ADDR(baddr, mas_index));
-+ cur_val = reg_val & M_BKE_EN_RMSK;
-+ if (val == cur_val)
-+ return;
-+
-+ if (!req && mode == BIMC_QOS_MODE_FIXED)
-+ set_qos_mode(baddr, mas_index, 1, 1, 1);
-+
-+ writel_relaxed(((reg_val & ~(M_BKE_EN_EN_BMSK)) | (val &
-+ M_BKE_EN_EN_BMSK)), M_BKE_EN_ADDR(baddr, mas_index));
-+ /* Make sure BKE on/off goes through before changing priorities */
-+ wmb();
-+
-+ if (req)
-+ set_qos_mode(baddr, mas_index, 0, 0, 0);
-+}
-+
-+static void bimc_set_static_qos_bw(void __iomem *base, unsigned int qos_freq,
-+ int mport, struct msm_bus_bimc_qos_bw *qbw)
-+{
-+ int32_t bw_mbps, thh = 0, thm, thl, gc;
-+ int32_t gp;
-+ u64 temp;
-+
-+ if (qos_freq == 0) {
-+ MSM_BUS_DBG("No QoS Frequency.\n");
-+ return;
-+ }
-+
-+ if (!(qbw->bw && qbw->gp)) {
-+ MSM_BUS_DBG("No QoS Bandwidth or Window size\n");
-+ return;
-+ }
-+
-+ /* Convert bandwidth to MBPS */
-+ temp = qbw->bw;
-+ bimc_div(&temp, 1000000);
-+ bw_mbps = temp;
-+
-+ /* Grant period in clock cycles
-+ * Grant period from bandwidth structure
-+ * is in nano seconds, QoS freq is in KHz.
-+ * Divide by 1000 to get clock cycles.
-+ */
-+ gp = (qos_freq * qbw->gp) / (1000 * NSEC_PER_USEC);
-+
-+ /* Grant count = BW in MBps * Grant period
-+ * in micro seconds
-+ */
-+ gc = bw_mbps * (qbw->gp / NSEC_PER_USEC);
-+ gc = min(gc, MAX_GC);
-+
-+ /* Medium threshold = -((Medium Threshold percentage *
-+ * Grant count) / 100)
-+ */
-+ thm = -((qbw->thmp * gc) / 100);
-+ qbw->thm = thm;
-+
-+ /* Low threshold = -(Grant count) */
-+ thl = -gc;
-+ qbw->thl = thl;
-+
-+ MSM_BUS_DBG("%s: BKE parameters: gp %d, gc %d, thm %d thl %d thh %d",
-+ __func__, gp, gc, thm, thl, thh);
-+
-+ trace_bus_bke_params(gc, gp, thl, thm, thl);
-+ set_qos_bw_regs(base, mport, thh, thm, thl, gp, gc);
-+}
-+
-+static void msm_bus_bimc_config_master(
-+ struct msm_bus_fabric_registration *fab_pdata,
-+ struct msm_bus_inode_info *info,
-+ uint64_t req_clk, uint64_t req_bw)
-+{
-+ int mode, i, ports;
-+ struct msm_bus_bimc_info *binfo;
-+ uint64_t bw = 0;
-+
-+ binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data;
-+ ports = info->node_info->num_mports;
-+
-+ /**
-+ * Here check the details of dual configuration.
-+ * Take actions based on different modes.
-+ * Check for threshold if limiter mode, etc.
-+ */
-+
-+ if (req_clk <= info->node_info->th[0]) {
-+ mode = info->node_info->mode;
-+ bw = info->node_info->bimc_bw[0];
-+ } else if ((info->node_info->num_thresh > 1) &&
-+ (req_clk <= info->node_info->th[1])) {
-+ mode = info->node_info->mode;
-+ bw = info->node_info->bimc_bw[1];
-+ } else
-+ mode = info->node_info->mode_thresh;
-+
-+ switch (mode) {
-+ case BIMC_QOS_MODE_BYPASS:
-+ case BIMC_QOS_MODE_FIXED:
-+ for (i = 0; i < ports; i++)
-+ bke_switch(binfo->base, info->node_info->qport[i],
-+ BKE_OFF, mode);
-+ break;
-+ case BIMC_QOS_MODE_REGULATOR:
-+ case BIMC_QOS_MODE_LIMITER:
-+ for (i = 0; i < ports; i++) {
-+ /* If not in fixed mode, update bandwidth */
-+ if ((info->node_info->cur_lim_bw != bw)
-+ && (mode != BIMC_QOS_MODE_FIXED)) {
-+ struct msm_bus_bimc_qos_bw qbw;
-+ qbw.ws = info->node_info->ws;
-+ qbw.bw = bw;
-+ qbw.gp = info->node_info->bimc_gp;
-+ qbw.thmp = info->node_info->bimc_thmp;
-+ bimc_set_static_qos_bw(binfo->base,
-+ binfo->qos_freq,
-+ info->node_info->qport[i], &qbw);
-+ info->node_info->cur_lim_bw = bw;
-+ MSM_BUS_DBG("%s: Qos is %d reqclk %llu bw %llu",
-+ __func__, mode, req_clk, bw);
-+ }
-+ bke_switch(binfo->base, info->node_info->qport[i],
-+ BKE_ON, mode);
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+static void msm_bus_bimc_update_bw(struct msm_bus_inode_info *hop,
-+ struct msm_bus_inode_info *info,
-+ struct msm_bus_fabric_registration *fab_pdata,
-+ void *sel_cdata, int *master_tiers,
-+ int64_t add_bw)
-+{
-+ struct msm_bus_bimc_info *binfo;
-+ struct msm_bus_bimc_qos_bw qbw;
-+ int i;
-+ int64_t bw;
-+ int ports = info->node_info->num_mports;
-+ struct msm_bus_bimc_commit *sel_cd =
-+ (struct msm_bus_bimc_commit *)sel_cdata;
-+
-+ MSM_BUS_DBG("BIMC: Update bw for ID %d, with IID: %d: %lld\n",
-+ info->node_info->id, info->node_info->priv_id, add_bw);
-+
-+ binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data;
-+
-+ if (info->node_info->num_mports == 0) {
-+ MSM_BUS_DBG("BIMC: Skip Master BW\n");
-+ goto skip_mas_bw;
-+ }
-+
-+ ports = info->node_info->num_mports;
-+ bw = INTERLEAVED_BW(fab_pdata, add_bw, ports);
-+
-+ for (i = 0; i < ports; i++) {
-+ sel_cd->mas[info->node_info->masterp[i]].bw += bw;
-+ sel_cd->mas[info->node_info->masterp[i]].hw_id =
-+ info->node_info->mas_hw_id;
-+ MSM_BUS_DBG("BIMC: Update mas_bw for ID: %d -> %llu\n",
-+ info->node_info->priv_id,
-+ sel_cd->mas[info->node_info->masterp[i]].bw);
-+ if (info->node_info->hw_sel == MSM_BUS_RPM)
-+ sel_cd->mas[info->node_info->masterp[i]].dirty = 1;
-+ else {
-+ if (!info->node_info->qport) {
-+ MSM_BUS_DBG("No qos ports to update!\n");
-+ break;
-+ }
-+ if (!(info->node_info->mode == BIMC_QOS_MODE_REGULATOR)
-+ || (info->node_info->mode ==
-+ BIMC_QOS_MODE_LIMITER)) {
-+ MSM_BUS_DBG("Skip QoS reg programming\n");
-+ break;
-+ }
-+
-+ MSM_BUS_DBG("qport: %d\n", info->node_info->qport[i]);
-+ qbw.bw = sel_cd->mas[info->node_info->masterp[i]].bw;
-+ qbw.ws = info->node_info->ws;
-+ /* Threshold low = 90% of bw */
-+ qbw.thl = div_s64((90 * bw), 100);
-+ /* Threshold medium = bw */
-+ qbw.thm = bw;
-+ /* Threshold high = 10% more than bw */
-+ qbw.thh = div_s64((110 * bw), 100);
-+ /* Check if info is a shared master.
-+ * If it is, mark it dirty
-+ * If it isn't, then set QOS Bandwidth.
-+ * Also if dual-conf is set, don't program bw regs.
-+ **/
-+ if (!info->node_info->dual_conf &&
-+ ((info->node_info->mode == BIMC_QOS_MODE_LIMITER) ||
-+ (info->node_info->mode == BIMC_QOS_MODE_REGULATOR)))
-+ msm_bus_bimc_set_qos_bw(binfo->base,
-+ binfo->qos_freq,
-+ info->node_info->qport[i], &qbw);
-+ }
-+ }
-+
-+skip_mas_bw:
-+ ports = hop->node_info->num_sports;
-+ MSM_BUS_DBG("BIMC: ID: %d, Sports: %d\n", hop->node_info->priv_id,
-+ ports);
-+
-+ for (i = 0; i < ports; i++) {
-+ sel_cd->slv[hop->node_info->slavep[i]].bw += add_bw;
-+ sel_cd->slv[hop->node_info->slavep[i]].hw_id =
-+ hop->node_info->slv_hw_id;
-+ MSM_BUS_DBG("BIMC: Update slave_bw: ID: %d -> %llu\n",
-+ hop->node_info->priv_id,
-+ sel_cd->slv[hop->node_info->slavep[i]].bw);
-+ MSM_BUS_DBG("BIMC: Update slave_bw: index: %d\n",
-+ hop->node_info->slavep[i]);
-+ /* Check if hop is a shared slave.
-+ * If it is, mark it dirty
-+ * If it isn't, then nothing to be done as the
-+ * slaves are in bypass mode.
-+ **/
-+ if (hop->node_info->hw_sel == MSM_BUS_RPM) {
-+ MSM_BUS_DBG("Slave dirty: %d, slavep: %d\n",
-+ hop->node_info->priv_id,
-+ hop->node_info->slavep[i]);
-+ sel_cd->slv[hop->node_info->slavep[i]].dirty = 1;
-+ }
-+ }
-+}
-+
-+static int msm_bus_bimc_commit(struct msm_bus_fabric_registration
-+ *fab_pdata, void *hw_data, void **cdata)
-+{
-+ MSM_BUS_DBG("\nReached BIMC Commit\n");
-+ msm_bus_remote_hw_commit(fab_pdata, hw_data, cdata);
-+ return 0;
-+}
-+
-+static void msm_bus_bimc_config_limiter(
-+ struct msm_bus_fabric_registration *fab_pdata,
-+ struct msm_bus_inode_info *info)
-+{
-+ struct msm_bus_bimc_info *binfo;
-+ int mode, i, ports;
-+
-+ binfo = (struct msm_bus_bimc_info *)fab_pdata->hw_data;
-+ ports = info->node_info->num_mports;
-+
-+ if (!info->node_info->qport) {
-+ MSM_BUS_DBG("No QoS Ports to init\n");
-+ return;
-+ }
-+
-+ if (info->cur_lim_bw)
-+ mode = BIMC_QOS_MODE_LIMITER;
-+ else
-+ mode = info->node_info->mode;
-+
-+ switch (mode) {
-+ case BIMC_QOS_MODE_BYPASS:
-+ case BIMC_QOS_MODE_FIXED:
-+ for (i = 0; i < ports; i++)
-+ bke_switch(binfo->base, info->node_info->qport[i],
-+ BKE_OFF, mode);
-+ break;
-+ case BIMC_QOS_MODE_REGULATOR:
-+ case BIMC_QOS_MODE_LIMITER:
-+ if (info->cur_lim_bw != info->cur_prg_bw) {
-+ MSM_BUS_DBG("Enabled BKE throttling node %d to %llu\n",
-+ info->node_info->id, info->cur_lim_bw);
-+ trace_bus_bimc_config_limiter(info->node_info->id,
-+ info->cur_lim_bw);
-+ for (i = 0; i < ports; i++) {
-+ /* If not in fixed mode, update bandwidth */
-+ struct msm_bus_bimc_qos_bw qbw;
-+
-+ qbw.ws = info->node_info->ws;
-+ qbw.bw = info->cur_lim_bw;
-+ qbw.gp = info->node_info->bimc_gp;
-+ qbw.thmp = info->node_info->bimc_thmp;
-+ bimc_set_static_qos_bw(binfo->base,
-+ binfo->qos_freq,
-+ info->node_info->qport[i], &qbw);
-+ bke_switch(binfo->base,
-+ info->node_info->qport[i],
-+ BKE_ON, mode);
-+ info->cur_prg_bw = qbw.bw;
-+ }
-+ }
-+ break;
-+ default:
-+ break;
-+ }
-+}
-+
-+static void bimc_init_mas_reg(struct msm_bus_bimc_info *binfo,
-+ struct msm_bus_inode_info *info,
-+ struct msm_bus_bimc_qos_mode *qmode, int mode)
-+{
-+ int i;
-+
-+ switch (mode) {
-+ case BIMC_QOS_MODE_FIXED:
-+ qmode->fixed.prio_level = info->node_info->prio_lvl;
-+ qmode->fixed.areq_prio_rd = info->node_info->prio_rd;
-+ qmode->fixed.areq_prio_wr = info->node_info->prio_wr;
-+ break;
-+ case BIMC_QOS_MODE_LIMITER:
-+ qmode->rl.qhealth[0].limit_commands = 1;
-+ qmode->rl.qhealth[1].limit_commands = 0;
-+ qmode->rl.qhealth[2].limit_commands = 0;
-+ qmode->rl.qhealth[3].limit_commands = 0;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ if (!info->node_info->qport) {
-+ MSM_BUS_DBG("No QoS Ports to init\n");
-+ return;
-+ }
-+
-+ for (i = 0; i < info->node_info->num_mports; i++) {
-+ /* If not in bypass mode, update priority */
-+ if (mode != BIMC_QOS_MODE_BYPASS) {
-+ msm_bus_bimc_set_qos_prio(binfo->base,
-+ info->node_info->
-+ qport[i], mode, qmode);
-+
-+ /* If not in fixed mode, update bandwidth */
-+ if (mode != BIMC_QOS_MODE_FIXED) {
-+ struct msm_bus_bimc_qos_bw qbw;
-+ qbw.ws = info->node_info->ws;
-+ qbw.bw = info->node_info->bimc_bw[0];
-+ qbw.gp = info->node_info->bimc_gp;
-+ qbw.thmp = info->node_info->bimc_thmp;
-+ bimc_set_static_qos_bw(binfo->base,
-+ binfo->qos_freq,
-+ info->node_info->qport[i], &qbw);
-+ }
-+ }
-+
-+ /* set mode */
-+ msm_bus_bimc_set_qos_mode(binfo->base,
-+ info->node_info->qport[i],
-+ mode);
-+ }
-+}
-+
-+static void init_health_regs(struct msm_bus_bimc_info *binfo,
-+ struct msm_bus_inode_info *info,
-+ struct msm_bus_bimc_qos_mode *qmode,
-+ int mode)
-+{
-+ int i;
-+
-+ if (mode == BIMC_QOS_MODE_LIMITER) {
-+ qmode->rl.qhealth[0].limit_commands = 1;
-+ qmode->rl.qhealth[1].limit_commands = 0;
-+ qmode->rl.qhealth[2].limit_commands = 0;
-+ qmode->rl.qhealth[3].limit_commands = 0;
-+
-+ if (!info->node_info->qport) {
-+ MSM_BUS_DBG("No QoS Ports to init\n");
-+ return;
-+ }
-+
-+ for (i = 0; i < info->node_info->num_mports; i++) {
-+ /* If not in bypass mode, update priority */
-+ if (mode != BIMC_QOS_MODE_BYPASS)
-+ msm_bus_bimc_set_qos_prio(binfo->base,
-+ info->node_info->qport[i], mode, qmode);
-+ }
-+ }
-+}
-+
-+
-+static int msm_bus_bimc_mas_init(struct msm_bus_bimc_info *binfo,
-+ struct msm_bus_inode_info *info)
-+{
-+ struct msm_bus_bimc_qos_mode *qmode;
-+ qmode = kzalloc(sizeof(struct msm_bus_bimc_qos_mode),
-+ GFP_KERNEL);
-+ if (!qmode) {
-+ MSM_BUS_WARN("Couldn't alloc prio data for node: %d\n",
-+ info->node_info->id);
-+ return -ENOMEM;
-+ }
-+
-+ info->hw_data = (void *)qmode;
-+
-+ /**
-+ * If the master supports dual configuration,
-+ * configure registers for both modes
-+ */
-+ if (info->node_info->dual_conf)
-+ bimc_init_mas_reg(binfo, info, qmode,
-+ info->node_info->mode_thresh);
-+ else if (info->node_info->nr_lim)
-+ init_health_regs(binfo, info, qmode, BIMC_QOS_MODE_LIMITER);
-+
-+ bimc_init_mas_reg(binfo, info, qmode, info->node_info->mode);
-+ return 0;
-+}
-+
-+static void msm_bus_bimc_node_init(void *hw_data,
-+ struct msm_bus_inode_info *info)
-+{
-+ struct msm_bus_bimc_info *binfo =
-+ (struct msm_bus_bimc_info *)hw_data;
-+
-+ if (!IS_SLAVE(info->node_info->priv_id) &&
-+ (info->node_info->hw_sel != MSM_BUS_RPM))
-+ msm_bus_bimc_mas_init(binfo, info);
-+}
-+
-+static int msm_bus_bimc_port_halt(uint32_t haltid, uint8_t mport)
-+{
-+ return 0;
-+}
-+
-+static int msm_bus_bimc_port_unhalt(uint32_t haltid, uint8_t mport)
-+{
-+ return 0;
-+}
-+
-+static int msm_bus_bimc_limit_mport(struct msm_bus_node_device_type *info,
-+ void __iomem *qos_base, uint32_t qos_off,
-+ uint32_t qos_delta, uint32_t qos_freq,
-+ bool enable_lim, u64 lim_bw)
-+{
-+ int mode;
-+ int i;
-+
-+ if (ZERO_OR_NULL_PTR(info->node_info->qport)) {
-+ MSM_BUS_DBG("No QoS Ports to limit\n");
-+ return 0;
-+ }
-+
-+ if (enable_lim && lim_bw) {
-+ mode = BIMC_QOS_MODE_LIMITER;
-+
-+ if (!info->node_info->lim_bw) {
-+ struct msm_bus_bimc_qos_mode qmode;
-+ qmode.rl.qhealth[0].limit_commands = 1;
-+ qmode.rl.qhealth[1].limit_commands = 0;
-+ qmode.rl.qhealth[2].limit_commands = 0;
-+ qmode.rl.qhealth[3].limit_commands = 0;
-+
-+ for (i = 0; i < info->node_info->num_qports; i++) {
-+ /* If not in bypass mode, update priority */
-+ if (mode != BIMC_QOS_MODE_BYPASS)
-+ msm_bus_bimc_set_qos_prio(qos_base,
-+ info->node_info->qport[i], mode,
-+ &qmode);
-+ }
-+ }
-+
-+ for (i = 0; i < info->node_info->num_qports; i++) {
-+ struct msm_bus_bimc_qos_bw qbw;
-+ /* If not in fixed mode, update bandwidth */
-+ if ((info->node_info->lim_bw != lim_bw)) {
-+ qbw.ws = info->node_info->qos_params.ws;
-+ qbw.bw = lim_bw;
-+ qbw.gp = info->node_info->qos_params.gp;
-+ qbw.thmp = info->node_info->qos_params.thmp;
-+ bimc_set_static_qos_bw(qos_base, qos_freq,
-+ info->node_info->qport[i], &qbw);
-+ }
-+ bke_switch(qos_base, info->node_info->qport[i],
-+ BKE_ON, mode);
-+ }
-+ info->node_info->lim_bw = lim_bw;
-+ } else {
-+ mode = info->node_info->qos_params.mode;
-+ for (i = 0; i < info->node_info->num_qports; i++) {
-+ bke_switch(qos_base, info->node_info->qport[i],
-+ BKE_OFF, mode);
-+ }
-+ }
-+ info->node_info->qos_params.cur_mode = mode;
-+ return 0;
-+}
-+
-+static bool msm_bus_bimc_update_bw_reg(int mode)
-+{
-+ bool ret = false;
-+
-+ if ((mode == BIMC_QOS_MODE_LIMITER)
-+ || (mode == BIMC_QOS_MODE_REGULATOR))
-+ ret = true;
-+
-+ return ret;
-+}
-+
-+static int msm_bus_bimc_qos_init(struct msm_bus_node_device_type *info,
-+ void __iomem *qos_base,
-+ uint32_t qos_off, uint32_t qos_delta,
-+ uint32_t qos_freq)
-+{
-+ int i;
-+ struct msm_bus_bimc_qos_mode qmode;
-+
-+ switch (info->node_info->qos_params.mode) {
-+ case BIMC_QOS_MODE_FIXED:
-+ qmode.fixed.prio_level = info->node_info->qos_params.prio_lvl;
-+ qmode.fixed.areq_prio_rd = info->node_info->qos_params.prio_rd;
-+ qmode.fixed.areq_prio_wr = info->node_info->qos_params.prio_wr;
-+ break;
-+ case BIMC_QOS_MODE_LIMITER:
-+ qmode.rl.qhealth[0].limit_commands = 1;
-+ qmode.rl.qhealth[1].limit_commands = 0;
-+ qmode.rl.qhealth[2].limit_commands = 0;
-+ qmode.rl.qhealth[3].limit_commands = 0;
-+ break;
-+ default:
-+ break;
-+ }
-+
-+ if (ZERO_OR_NULL_PTR(info->node_info->qport)) {
-+ MSM_BUS_DBG("No QoS Ports to init\n");
-+ return 0;
-+ }
-+
-+ for (i = 0; i < info->node_info->num_qports; i++) {
-+ /* If not in bypass mode, update priority */
-+ if (info->node_info->qos_params.mode != BIMC_QOS_MODE_BYPASS)
-+ msm_bus_bimc_set_qos_prio(qos_base, info->node_info->
-+ qport[i], info->node_info->qos_params.mode,
-+ &qmode);
-+
-+ /* set mode */
-+ if (info->node_info->qos_params.mode == BIMC_QOS_MODE_LIMITER)
-+ bke_switch(qos_base, info->node_info->qport[i],
-+ BKE_OFF, BIMC_QOS_MODE_FIXED);
-+ else
-+ msm_bus_bimc_set_qos_mode(qos_base,
-+ info->node_info->qport[i],
-+ info->node_info->qos_params.mode);
-+ }
-+
-+ return 0;
-+}
-+
-+static int msm_bus_bimc_set_bw(struct msm_bus_node_device_type *dev,
-+ void __iomem *qos_base, uint32_t qos_off,
-+ uint32_t qos_delta, uint32_t qos_freq)
-+{
-+ struct msm_bus_bimc_qos_bw qbw;
-+ int i;
-+ int64_t bw = 0;
-+ int ret = 0;
-+ struct msm_bus_node_info_type *info = dev->node_info;
-+
-+ if (info && info->num_qports &&
-+ ((info->qos_params.mode == BIMC_QOS_MODE_LIMITER) ||
-+ (info->qos_params.mode == BIMC_QOS_MODE_REGULATOR))) {
-+ bw = msm_bus_div64(info->num_qports,
-+ dev->node_ab.ab[DUAL_CTX]);
-+
-+ for (i = 0; i < info->num_qports; i++) {
-+ MSM_BUS_DBG("BIMC: Update mas_bw for ID: %d -> %llu\n",
-+ info->id, bw);
-+
-+ if (!info->qport) {
-+ MSM_BUS_DBG("No qos ports to update!\n");
-+ break;
-+ }
-+
-+ qbw.bw = bw + info->qos_params.bw_buffer;
-+ trace_bus_bimc_config_limiter(info->id, bw);
-+
-+ /* Default to gp of 5us */
-+ qbw.gp = (info->qos_params.gp ?
-+ info->qos_params.gp : 5000);
-+ /* Default to thmp of 50% */
-+ qbw.thmp = (info->qos_params.thmp ?
-+ info->qos_params.thmp : 50);
-+ /*
-+ * If the BW vote is 0 then set the QoS mode to
-+ * Fixed.
-+ */
-+ if (bw) {
-+ bimc_set_static_qos_bw(qos_base, qos_freq,
-+ info->qport[i], &qbw);
-+ bke_switch(qos_base, info->qport[i],
-+ BKE_ON, info->qos_params.mode);
-+ } else {
-+ bke_switch(qos_base, info->qport[i],
-+ BKE_OFF, BIMC_QOS_MODE_FIXED);
-+ }
-+ }
-+ }
-+ return ret;
-+}
-+
-+int msm_bus_bimc_hw_init(struct msm_bus_fabric_registration *pdata,
-+ struct msm_bus_hw_algorithm *hw_algo)
-+{
-+ /* Set interleaving to true by default */
-+ MSM_BUS_DBG("\nInitializing BIMC...\n");
-+ pdata->il_flag = true;
-+ hw_algo->allocate_commit_data = msm_bus_bimc_allocate_commit_data;
-+ hw_algo->allocate_hw_data = msm_bus_bimc_allocate_bimc_data;
-+ hw_algo->node_init = msm_bus_bimc_node_init;
-+ hw_algo->free_commit_data = free_commit_data;
-+ hw_algo->update_bw = msm_bus_bimc_update_bw;
-+ hw_algo->commit = msm_bus_bimc_commit;
-+ hw_algo->port_halt = msm_bus_bimc_port_halt;
-+ hw_algo->port_unhalt = msm_bus_bimc_port_unhalt;
-+ hw_algo->config_master = msm_bus_bimc_config_master;
-+ hw_algo->config_limiter = msm_bus_bimc_config_limiter;
-+ hw_algo->update_bw_reg = msm_bus_bimc_update_bw_reg;
-+ /* BIMC slaves are shared. Slave registers are set through RPM */
-+ if (!pdata->ahb)
-+ pdata->rpm_enabled = 1;
-+ return 0;
-+}
-+
-+int msm_bus_bimc_set_ops(struct msm_bus_node_device_type *bus_dev)
-+{
-+ if (!bus_dev)
-+ return -ENODEV;
-+ else {
-+ bus_dev->fabdev->noc_ops.qos_init = msm_bus_bimc_qos_init;
-+ bus_dev->fabdev->noc_ops.set_bw = msm_bus_bimc_set_bw;
-+ bus_dev->fabdev->noc_ops.limit_mport = msm_bus_bimc_limit_mport;
-+ bus_dev->fabdev->noc_ops.update_bw_reg =
-+ msm_bus_bimc_update_bw_reg;
-+ }
-+ return 0;
-+}
-+EXPORT_SYMBOL(msm_bus_bimc_set_ops);
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_bimc.h
-@@ -0,0 +1,127 @@
-+/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef _ARCH_ARM_MACH_MSM_BUS_BIMC_H
-+#define _ARCH_ARM_MACH_MSM_BUS_BIMC_H
-+
-+struct msm_bus_bimc_params {
-+ uint32_t bus_id;
-+ uint32_t addr_width;
-+ uint32_t data_width;
-+ uint32_t nmasters;
-+ uint32_t nslaves;
-+};
-+
-+struct msm_bus_bimc_commit {
-+ struct msm_bus_node_hw_info *mas;
-+ struct msm_bus_node_hw_info *slv;
-+};
-+
-+struct msm_bus_bimc_info {
-+ void __iomem *base;
-+ uint32_t base_addr;
-+ uint32_t qos_freq;
-+ struct msm_bus_bimc_params params;
-+ struct msm_bus_bimc_commit cdata[NUM_CTX];
-+};
-+
-+struct msm_bus_bimc_node {
-+ uint32_t conn_mask;
-+ uint32_t data_width;
-+ uint8_t slv_arb_mode;
-+};
-+
-+enum msm_bus_bimc_arb_mode {
-+ BIMC_ARB_MODE_RR = 0,
-+ BIMC_ARB_MODE_PRIORITY_RR,
-+ BIMC_ARB_MODE_TIERED_RR,
-+};
-+
-+
-+enum msm_bus_bimc_interleave {
-+ BIMC_INTERLEAVE_NONE = 0,
-+ BIMC_INTERLEAVE_ODD,
-+ BIMC_INTERLEAVE_EVEN,
-+};
-+
-+struct msm_bus_bimc_slave_seg {
-+ bool enable;
-+ uint64_t start_addr;
-+ uint64_t seg_size;
-+ uint8_t interleave;
-+};
-+
-+enum msm_bus_bimc_qos_mode_type {
-+ BIMC_QOS_MODE_FIXED = 0,
-+ BIMC_QOS_MODE_LIMITER,
-+ BIMC_QOS_MODE_BYPASS,
-+ BIMC_QOS_MODE_REGULATOR,
-+};
-+
-+struct msm_bus_bimc_qos_health {
-+ bool limit_commands;
-+ uint32_t areq_prio;
-+ uint32_t prio_level;
-+};
-+
-+struct msm_bus_bimc_mode_fixed {
-+ uint32_t prio_level;
-+ uint32_t areq_prio_rd;
-+ uint32_t areq_prio_wr;
-+};
-+
-+struct msm_bus_bimc_mode_rl {
-+ uint8_t qhealthnum;
-+ struct msm_bus_bimc_qos_health qhealth[4];
-+};
-+
-+struct msm_bus_bimc_qos_mode {
-+ uint8_t mode;
-+ struct msm_bus_bimc_mode_fixed fixed;
-+ struct msm_bus_bimc_mode_rl rl;
-+};
-+
-+struct msm_bus_bimc_qos_bw {
-+ uint64_t bw; /* bw is in Bytes/sec */
-+ uint32_t ws; /* Window size in nano seconds*/
-+ int64_t thh; /* Threshold high, bytes per second */
-+ int64_t thm; /* Threshold medium, bytes per second */
-+ int64_t thl; /* Threshold low, bytes per second */
-+ u32 gp; /* Grant Period in micro seconds */
-+ u32 thmp; /* Threshold medium in percentage */
-+};
-+
-+struct msm_bus_bimc_clk_gate {
-+ bool core_clk_gate_en;
-+ bool arb_clk_gate_en; /* For arbiter */
-+ bool port_clk_gate_en; /* For regs on BIMC core clock */
-+};
-+
-+void msm_bus_bimc_set_slave_seg(struct msm_bus_bimc_info *binfo,
-+ uint32_t slv_index, uint32_t seg_index,
-+ struct msm_bus_bimc_slave_seg *bsseg);
-+void msm_bus_bimc_set_slave_clk_gate(struct msm_bus_bimc_info *binfo,
-+ uint32_t slv_index, struct msm_bus_bimc_clk_gate *bgate);
-+void msm_bus_bimc_set_mas_clk_gate(struct msm_bus_bimc_info *binfo,
-+ uint32_t mas_index, struct msm_bus_bimc_clk_gate *bgate);
-+void msm_bus_bimc_arb_en(struct msm_bus_bimc_info *binfo,
-+ uint32_t slv_index, bool en);
-+void msm_bus_bimc_get_params(struct msm_bus_bimc_info *binfo,
-+ struct msm_bus_bimc_params *params);
-+void msm_bus_bimc_get_mas_params(struct msm_bus_bimc_info *binfo,
-+ uint32_t mas_index, struct msm_bus_bimc_node *mparams);
-+void msm_bus_bimc_get_slv_params(struct msm_bus_bimc_info *binfo,
-+ uint32_t slv_index, struct msm_bus_bimc_node *sparams);
-+bool msm_bus_bimc_get_arb_en(struct msm_bus_bimc_info *binfo,
-+ uint32_t slv_index);
-+
-+#endif /*_ARCH_ARM_MACH_MSM_BUS_BIMC_H*/
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_client_api.c
-@@ -0,0 +1,83 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/list.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/mutex.h>
-+#include <linux/radix-tree.h>
-+#include <linux/clk.h>
-+#include "msm-bus.h"
-+#include "msm_bus_core.h"
-+
-+struct msm_bus_arb_ops arb_ops;
-+
-+/**
-+ * msm_bus_scale_register_client() - Register the clients with the msm bus
-+ * driver
-+ * @pdata: Platform data of the client, containing src, dest, ab, ib.
-+ * Return non-zero value in case of success, 0 in case of failure.
-+ *
-+ * Client data contains the vectors specifying arbitrated bandwidth (ab)
-+ * and instantaneous bandwidth (ib) requested between a particular
-+ * src and dest.
-+ */
-+uint32_t msm_bus_scale_register_client(struct msm_bus_scale_pdata *pdata)
-+{
-+ if (arb_ops.register_client)
-+ return arb_ops.register_client(pdata);
-+ else {
-+ pr_err("%s: Bus driver not ready.",
-+ __func__);
-+ return 0;
-+ }
-+}
-+EXPORT_SYMBOL(msm_bus_scale_register_client);
-+
-+/**
-+ * msm_bus_scale_client_update_request() - Update the request for bandwidth
-+ * from a particular client
-+ *
-+ * cl: Handle to the client
-+ * index: Index into the vector, to which the bw and clock values need to be
-+ * updated
-+ */
-+int msm_bus_scale_client_update_request(uint32_t cl, unsigned int index)
-+{
-+ if (arb_ops.update_request)
-+ return arb_ops.update_request(cl, index);
-+ else {
-+ pr_err("%s: Bus driver not ready.",
-+ __func__);
-+ return -EPROBE_DEFER;
-+ }
-+}
-+EXPORT_SYMBOL(msm_bus_scale_client_update_request);
-+
-+/**
-+ * msm_bus_scale_unregister_client() - Unregister the client from the bus driver
-+ * @cl: Handle to the client
-+ */
-+void msm_bus_scale_unregister_client(uint32_t cl)
-+{
-+ if (arb_ops.unregister_client)
-+ arb_ops.unregister_client(cl);
-+ else {
-+ pr_err("%s: Bus driver not ready.",
-+ __func__);
-+ }
-+}
-+EXPORT_SYMBOL(msm_bus_scale_unregister_client);
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_core.c
-@@ -0,0 +1,125 @@
-+/* Copyright (c) 2010-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/mutex.h>
-+#include <linux/radix-tree.h>
-+#include <linux/clk.h>
-+#include "msm-bus-board.h"
-+#include "msm-bus.h"
-+#include "msm_bus_core.h"
-+
-+static atomic_t num_fab = ATOMIC_INIT(0);
-+
-+int msm_bus_get_num_fab(void)
-+{
-+ return atomic_read(&num_fab);
-+}
-+
-+int msm_bus_device_match(struct device *dev, void *id)
-+{
-+ struct msm_bus_fabric_device *fabdev = to_msm_bus_fabric_device(dev);
-+
-+ if (!fabdev) {
-+ MSM_BUS_WARN("Fabric %p returning 0\n", fabdev);
-+ return 0;
-+ }
-+ return fabdev->id == *(int *)id;
-+}
-+
-+static void msm_bus_release(struct device *device)
-+{
-+}
-+
-+struct bus_type msm_bus_type = {
-+ .name = "msm-bus-type",
-+};
-+EXPORT_SYMBOL(msm_bus_type);
-+
-+/**
-+ * msm_bus_get_fabric_device() - This function is used to search for
-+ * the fabric device on the bus
-+ * @fabid: Fabric id
-+ * Function returns: Pointer to the fabric device
-+ */
-+struct msm_bus_fabric_device *msm_bus_get_fabric_device(int fabid)
-+{
-+ struct device *dev;
-+ struct msm_bus_fabric_device *fabric;
-+ dev = bus_find_device(&msm_bus_type, NULL, (void *)&fabid,
-+ msm_bus_device_match);
-+ if (!dev)
-+ return NULL;
-+ fabric = to_msm_bus_fabric_device(dev);
-+ return fabric;
-+}
-+
-+/**
-+ * msm_bus_fabric_device_register() - Registers a fabric on msm bus
-+ * @fabdev: Fabric device to be registered
-+ */
-+int msm_bus_fabric_device_register(struct msm_bus_fabric_device *fabdev)
-+{
-+ int ret = 0;
-+ fabdev->dev.bus = &msm_bus_type;
-+ fabdev->dev.release = msm_bus_release;
-+ ret = dev_set_name(&fabdev->dev, fabdev->name);
-+ if (ret) {
-+ MSM_BUS_ERR("error setting dev name\n");
-+ goto err;
-+ }
-+
-+ ret = device_register(&fabdev->dev);
-+ if (ret < 0) {
-+ MSM_BUS_ERR("error registering device%d %s\n",
-+ ret, fabdev->name);
-+ goto err;
-+ }
-+ atomic_inc(&num_fab);
-+err:
-+ return ret;
-+}
-+
-+/**
-+ * msm_bus_fabric_device_unregister() - Unregisters the fabric
-+ * devices from the msm bus
-+ */
-+void msm_bus_fabric_device_unregister(struct msm_bus_fabric_device *fabdev)
-+{
-+ device_unregister(&fabdev->dev);
-+ atomic_dec(&num_fab);
-+}
-+
-+static void __exit msm_bus_exit(void)
-+{
-+ bus_unregister(&msm_bus_type);
-+}
-+
-+static int __init msm_bus_init(void)
-+{
-+ int retval = 0;
-+ retval = bus_register(&msm_bus_type);
-+ if (retval)
-+ MSM_BUS_ERR("bus_register error! %d\n",
-+ retval);
-+ return retval;
-+}
-+postcore_initcall(msm_bus_init);
-+module_exit(msm_bus_exit);
-+MODULE_LICENSE("GPL v2");
-+MODULE_VERSION("0.2");
-+MODULE_ALIAS("platform:msm_bus");
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_core.h
-@@ -0,0 +1,375 @@
-+/* Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef _ARCH_ARM_MACH_MSM_BUS_CORE_H
-+#define _ARCH_ARM_MACH_MSM_BUS_CORE_H
-+
-+#include <linux/types.h>
-+#include <linux/device.h>
-+#include <linux/radix-tree.h>
-+#include <linux/platform_device.h>
-+#include "msm-bus-board.h"
-+#include "msm-bus.h"
-+
-+#define MSM_BUS_DBG(msg, ...) \
-+ pr_debug(msg, ## __VA_ARGS__)
-+#define MSM_BUS_ERR(msg, ...) \
-+ pr_err(msg, ## __VA_ARGS__)
-+#define MSM_BUS_WARN(msg, ...) \
-+ pr_warn(msg, ## __VA_ARGS__)
-+#define MSM_FAB_ERR(msg, ...) \
-+ dev_err(&fabric->fabdev.dev, msg, ## __VA_ARGS__)
-+
-+#define IS_MASTER_VALID(mas) \
-+ (((mas >= MSM_BUS_MASTER_FIRST) && (mas <= MSM_BUS_MASTER_LAST)) \
-+ ? 1 : 0)
-+#define IS_SLAVE_VALID(slv) \
-+ (((slv >= MSM_BUS_SLAVE_FIRST) && (slv <= MSM_BUS_SLAVE_LAST)) ? 1 : 0)
-+
-+#define INTERLEAVED_BW(fab_pdata, bw, ports) \
-+ ((fab_pdata->il_flag) ? ((bw < 0) \
-+ ? -msm_bus_div64((ports), (-bw)) : msm_bus_div64((ports), (bw))) : (bw))
-+#define INTERLEAVED_VAL(fab_pdata, n) \
-+ ((fab_pdata->il_flag) ? (n) : 1)
-+#define KBTOB(a) (a * 1000ULL)
-+
-+enum msm_bus_dbg_op_type {
-+ MSM_BUS_DBG_UNREGISTER = -2,
-+ MSM_BUS_DBG_REGISTER,
-+ MSM_BUS_DBG_OP = 1,
-+};
-+
-+enum msm_bus_hw_sel {
-+ MSM_BUS_RPM = 0,
-+ MSM_BUS_NOC,
-+ MSM_BUS_BIMC,
-+};
-+
-+struct msm_bus_arb_ops {
-+ uint32_t (*register_client)(struct msm_bus_scale_pdata *pdata);
-+ int (*update_request)(uint32_t cl, unsigned int index);
-+ void (*unregister_client)(uint32_t cl);
-+};
-+
-+enum {
-+ SLAVE_NODE,
-+ MASTER_NODE,
-+ CLK_NODE,
-+ NR_LIM_NODE,
-+};
-+
-+
-+extern struct bus_type msm_bus_type;
-+extern struct msm_bus_arb_ops arb_ops;
-+extern void msm_bus_arb_setops_legacy(struct msm_bus_arb_ops *arb_ops);
-+
-+struct msm_bus_node_info {
-+ unsigned int id;
-+ unsigned int priv_id;
-+ unsigned int mas_hw_id;
-+ unsigned int slv_hw_id;
-+ int gateway;
-+ int *masterp;
-+ int *qport;
-+ int num_mports;
-+ int *slavep;
-+ int num_sports;
-+ int *tier;
-+ int num_tiers;
-+ int ahb;
-+ int hw_sel;
-+ const char *slaveclk[NUM_CTX];
-+ const char *memclk[NUM_CTX];
-+ const char *iface_clk_node;
-+ unsigned int buswidth;
-+ unsigned int ws;
-+ unsigned int mode;
-+ unsigned int perm_mode;
-+ unsigned int prio_lvl;
-+ unsigned int prio_rd;
-+ unsigned int prio_wr;
-+ unsigned int prio1;
-+ unsigned int prio0;
-+ unsigned int num_thresh;
-+ u64 *th;
-+ u64 cur_lim_bw;
-+ unsigned int mode_thresh;
-+ bool dual_conf;
-+ u64 *bimc_bw;
-+ bool nr_lim;
-+ u32 ff;
-+ bool rt_mas;
-+ u32 bimc_gp;
-+ u32 bimc_thmp;
-+ u64 floor_bw;
-+ const char *name;
-+};
-+
-+struct path_node {
-+ uint64_t clk[NUM_CTX];
-+ uint64_t bw[NUM_CTX];
-+ uint64_t *sel_clk;
-+ uint64_t *sel_bw;
-+ int next;
-+};
-+
-+struct msm_bus_link_info {
-+ uint64_t clk[NUM_CTX];
-+ uint64_t *sel_clk;
-+ uint64_t memclk;
-+ int64_t bw[NUM_CTX];
-+ int64_t *sel_bw;
-+ int *tier;
-+ int num_tiers;
-+};
-+
-+struct nodeclk {
-+ struct clk *clk;
-+ uint64_t rate;
-+ bool dirty;
-+ bool enable;
-+};
-+
-+struct msm_bus_inode_info {
-+ struct msm_bus_node_info *node_info;
-+ uint64_t max_bw;
-+ uint64_t max_clk;
-+ uint64_t cur_lim_bw;
-+ uint64_t cur_prg_bw;
-+ struct msm_bus_link_info link_info;
-+ int num_pnodes;
-+ struct path_node *pnode;
-+ int commit_index;
-+ struct nodeclk nodeclk[NUM_CTX];
-+ struct nodeclk memclk[NUM_CTX];
-+ struct nodeclk iface_clk;
-+ void *hw_data;
-+};
-+
-+struct msm_bus_node_hw_info {
-+ bool dirty;
-+ unsigned int hw_id;
-+ uint64_t bw;
-+};
-+
-+struct msm_bus_hw_algorithm {
-+ int (*allocate_commit_data)(struct msm_bus_fabric_registration
-+ *fab_pdata, void **cdata, int ctx);
-+ void *(*allocate_hw_data)(struct platform_device *pdev,
-+ struct msm_bus_fabric_registration *fab_pdata);
-+ void (*node_init)(void *hw_data, struct msm_bus_inode_info *info);
-+ void (*free_commit_data)(void *cdata);
-+ void (*update_bw)(struct msm_bus_inode_info *hop,
-+ struct msm_bus_inode_info *info,
-+ struct msm_bus_fabric_registration *fab_pdata,
-+ void *sel_cdata, int *master_tiers,
-+ int64_t add_bw);
-+ void (*fill_cdata_buffer)(int *curr, char *buf, const int max_size,
-+ void *cdata, int nmasters, int nslaves, int ntslaves);
-+ int (*commit)(struct msm_bus_fabric_registration
-+ *fab_pdata, void *hw_data, void **cdata);
-+ int (*port_unhalt)(uint32_t haltid, uint8_t mport);
-+ int (*port_halt)(uint32_t haltid, uint8_t mport);
-+ void (*config_master)(struct msm_bus_fabric_registration *fab_pdata,
-+ struct msm_bus_inode_info *info,
-+ uint64_t req_clk, uint64_t req_bw);
-+ void (*config_limiter)(struct msm_bus_fabric_registration *fab_pdata,
-+ struct msm_bus_inode_info *info);
-+ bool (*update_bw_reg)(int mode);
-+};
-+
-+struct msm_bus_fabric_device {
-+ int id;
-+ const char *name;
-+ struct device dev;
-+ const struct msm_bus_fab_algorithm *algo;
-+ const struct msm_bus_board_algorithm *board_algo;
-+ struct msm_bus_hw_algorithm hw_algo;
-+ int visited;
-+ int num_nr_lim;
-+ u64 nr_lim_thresh;
-+ u32 eff_fact;
-+};
-+#define to_msm_bus_fabric_device(d) container_of(d, \
-+ struct msm_bus_fabric_device, d)
-+
-+struct msm_bus_fabric {
-+ struct msm_bus_fabric_device fabdev;
-+ int ahb;
-+ void *cdata[NUM_CTX];
-+ bool arb_dirty;
-+ bool clk_dirty;
-+ struct radix_tree_root fab_tree;
-+ int num_nodes;
-+ struct list_head gateways;
-+ struct msm_bus_inode_info info;
-+ struct msm_bus_fabric_registration *pdata;
-+ void *hw_data;
-+};
-+#define to_msm_bus_fabric(d) container_of(d, \
-+ struct msm_bus_fabric, d)
-+
-+
-+struct msm_bus_fab_algorithm {
-+ int (*update_clks)(struct msm_bus_fabric_device *fabdev,
-+ struct msm_bus_inode_info *pme, int index,
-+ uint64_t curr_clk, uint64_t req_clk,
-+ uint64_t bwsum, int flag, int ctx,
-+ unsigned int cl_active_flag);
-+ int (*port_halt)(struct msm_bus_fabric_device *fabdev, int portid);
-+ int (*port_unhalt)(struct msm_bus_fabric_device *fabdev, int portid);
-+ int (*commit)(struct msm_bus_fabric_device *fabdev);
-+ struct msm_bus_inode_info *(*find_node)(struct msm_bus_fabric_device
-+ *fabdev, int id);
-+ struct msm_bus_inode_info *(*find_gw_node)(struct msm_bus_fabric_device
-+ *fabdev, int id);
-+ struct list_head *(*get_gw_list)(struct msm_bus_fabric_device *fabdev);
-+ void (*update_bw)(struct msm_bus_fabric_device *fabdev, struct
-+ msm_bus_inode_info * hop, struct msm_bus_inode_info *info,
-+ int64_t add_bw, int *master_tiers, int ctx);
-+ void (*config_master)(struct msm_bus_fabric_device *fabdev,
-+ struct msm_bus_inode_info *info, uint64_t req_clk,
-+ uint64_t req_bw);
-+ void (*config_limiter)(struct msm_bus_fabric_device *fabdev,
-+ struct msm_bus_inode_info *info);
-+};
-+
-+struct msm_bus_board_algorithm {
-+ int board_nfab;
-+ void (*assign_iids)(struct msm_bus_fabric_registration *fabreg,
-+ int fabid);
-+ int (*get_iid)(int id);
-+};
-+
-+/**
-+ * Used to store the list of fabrics and other info to be
-+ * maintained outside the fabric structure.
-+ * Used while calculating path, and to find fabric ptrs
-+ */
-+struct msm_bus_fabnodeinfo {
-+ struct list_head list;
-+ struct msm_bus_inode_info *info;
-+};
-+
-+struct msm_bus_client {
-+ int id;
-+ struct msm_bus_scale_pdata *pdata;
-+ int *src_pnode;
-+ int curr;
-+};
-+
-+uint64_t msm_bus_div64(unsigned int width, uint64_t bw);
-+int msm_bus_fabric_device_register(struct msm_bus_fabric_device *fabric);
-+void msm_bus_fabric_device_unregister(struct msm_bus_fabric_device *fabric);
-+struct msm_bus_fabric_device *msm_bus_get_fabric_device(int fabid);
-+int msm_bus_get_num_fab(void);
-+
-+
-+int msm_bus_hw_fab_init(struct msm_bus_fabric_registration *pdata,
-+ struct msm_bus_hw_algorithm *hw_algo);
-+void msm_bus_board_init(struct msm_bus_fabric_registration *pdata);
-+void msm_bus_board_set_nfab(struct msm_bus_fabric_registration *pdata,
-+ int nfab);
-+#if defined(CONFIG_MSM_RPM_SMD)
-+int msm_bus_rpm_hw_init(struct msm_bus_fabric_registration *pdata,
-+ struct msm_bus_hw_algorithm *hw_algo);
-+int msm_bus_remote_hw_commit(struct msm_bus_fabric_registration
-+ *fab_pdata, void *hw_data, void **cdata);
-+void msm_bus_rpm_fill_cdata_buffer(int *curr, char *buf, const int max_size,
-+ void *cdata, int nmasters, int nslaves, int ntslaves);
-+#else
-+static inline int msm_bus_rpm_hw_init(struct msm_bus_fabric_registration *pdata,
-+ struct msm_bus_hw_algorithm *hw_algo)
-+{
-+ return 0;
-+}
-+static inline int msm_bus_remote_hw_commit(struct msm_bus_fabric_registration
-+ *fab_pdata, void *hw_data, void **cdata)
-+{
-+ return 0;
-+}
-+static inline void msm_bus_rpm_fill_cdata_buffer(int *curr, char *buf,
-+ const int max_size, void *cdata, int nmasters, int nslaves,
-+ int ntslaves)
-+{
-+}
-+#endif
-+
-+int msm_bus_noc_hw_init(struct msm_bus_fabric_registration *pdata,
-+ struct msm_bus_hw_algorithm *hw_algo);
-+int msm_bus_bimc_hw_init(struct msm_bus_fabric_registration *pdata,
-+ struct msm_bus_hw_algorithm *hw_algo);
-+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
-+void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata, int index,
-+ uint32_t cl);
-+void msm_bus_dbg_commit_data(const char *fabname, void *cdata,
-+ int nmasters, int nslaves, int ntslaves, int op);
-+#else
-+static inline void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata,
-+ int index, uint32_t cl)
-+{
-+}
-+static inline void msm_bus_dbg_commit_data(const char *fabname,
-+ void *cdata, int nmasters, int nslaves, int ntslaves,
-+ int op)
-+{
-+}
-+#endif
-+
-+#ifdef CONFIG_CORESIGHT
-+int msmbus_coresight_init(struct platform_device *pdev);
-+void msmbus_coresight_remove(struct platform_device *pdev);
-+int msmbus_coresight_init_adhoc(struct platform_device *pdev,
-+ struct device_node *of_node);
-+void msmbus_coresight_remove_adhoc(struct platform_device *pdev);
-+#else
-+static inline int msmbus_coresight_init(struct platform_device *pdev)
-+{
-+ return 0;
-+}
-+
-+static inline void msmbus_coresight_remove(struct platform_device *pdev)
-+{
-+}
-+
-+static inline int msmbus_coresight_init_adhoc(struct platform_device *pdev,
-+ struct device_node *of_node)
-+{
-+ return 0;
-+}
-+
-+static inline void msmbus_coresight_remove_adhoc(struct platform_device *pdev)
-+{
-+}
-+#endif
-+
-+
-+#ifdef CONFIG_OF
-+void msm_bus_of_get_nfab(struct platform_device *pdev,
-+ struct msm_bus_fabric_registration *pdata);
-+struct msm_bus_fabric_registration
-+ *msm_bus_of_get_fab_data(struct platform_device *pdev);
-+#else
-+static inline void msm_bus_of_get_nfab(struct platform_device *pdev,
-+ struct msm_bus_fabric_registration *pdata)
-+{
-+ return;
-+}
-+
-+static inline struct msm_bus_fabric_registration
-+ *msm_bus_of_get_fab_data(struct platform_device *pdev)
-+{
-+ return NULL;
-+}
-+#endif
-+
-+#endif /*_ARCH_ARM_MACH_MSM_BUS_CORE_H*/
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_dbg.c
-@@ -0,0 +1,810 @@
-+/* Copyright (c) 2010-2012, 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/seq_file.h>
-+#include <linux/debugfs.h>
-+#include <linux/slab.h>
-+#include <linux/mutex.h>
-+#include <linux/string.h>
-+#include <linux/uaccess.h>
-+#include <linux/hrtimer.h>
-+#include "msm-bus-board.h"
-+#include "msm-bus.h"
-+#include "msm_bus_rules.h"
-+#include "msm_bus_core.h"
-+#include "msm_bus_adhoc.h"
-+
-+#define CREATE_TRACE_POINTS
-+#include <trace/events/trace_msm_bus.h>
-+
-+#define MAX_BUFF_SIZE 4096
-+#define FILL_LIMIT 128
-+
-+static struct dentry *clients;
-+static struct dentry *dir;
-+static DEFINE_MUTEX(msm_bus_dbg_fablist_lock);
-+struct msm_bus_dbg_state {
-+ uint32_t cl;
-+ uint8_t enable;
-+ uint8_t current_index;
-+} clstate;
-+
-+struct msm_bus_cldata {
-+ const struct msm_bus_scale_pdata *pdata;
-+ int index;
-+ uint32_t clid;
-+ int size;
-+ struct dentry *file;
-+ struct list_head list;
-+ char buffer[MAX_BUFF_SIZE];
-+};
-+
-+struct msm_bus_fab_list {
-+ const char *name;
-+ int size;
-+ struct dentry *file;
-+ struct list_head list;
-+ char buffer[MAX_BUFF_SIZE];
-+};
-+
-+static char *rules_buf;
-+
-+LIST_HEAD(fabdata_list);
-+LIST_HEAD(cl_list);
-+
-+/**
-+ * The following structures and funtions are used for
-+ * the test-client which can be created at run-time.
-+ */
-+
-+static struct msm_bus_vectors init_vectors[1];
-+static struct msm_bus_vectors current_vectors[1];
-+static struct msm_bus_vectors requested_vectors[1];
-+
-+static struct msm_bus_paths shell_client_usecases[] = {
-+ {
-+ .num_paths = ARRAY_SIZE(init_vectors),
-+ .vectors = init_vectors,
-+ },
-+ {
-+ .num_paths = ARRAY_SIZE(current_vectors),
-+ .vectors = current_vectors,
-+ },
-+ {
-+ .num_paths = ARRAY_SIZE(requested_vectors),
-+ .vectors = requested_vectors,
-+ },
-+};
-+
-+static struct msm_bus_scale_pdata shell_client = {
-+ .usecase = shell_client_usecases,
-+ .num_usecases = ARRAY_SIZE(shell_client_usecases),
-+ .name = "test-client",
-+};
-+
-+static void msm_bus_dbg_init_vectors(void)
-+{
-+ init_vectors[0].src = -1;
-+ init_vectors[0].dst = -1;
-+ init_vectors[0].ab = 0;
-+ init_vectors[0].ib = 0;
-+ current_vectors[0].src = -1;
-+ current_vectors[0].dst = -1;
-+ current_vectors[0].ab = 0;
-+ current_vectors[0].ib = 0;
-+ requested_vectors[0].src = -1;
-+ requested_vectors[0].dst = -1;
-+ requested_vectors[0].ab = 0;
-+ requested_vectors[0].ib = 0;
-+ clstate.enable = 0;
-+ clstate.current_index = 0;
-+}
-+
-+static int msm_bus_dbg_update_cl_request(uint32_t cl)
-+{
-+ int ret = 0;
-+
-+ if (clstate.current_index < 2)
-+ clstate.current_index = 2;
-+ else {
-+ clstate.current_index = 1;
-+ current_vectors[0].ab = requested_vectors[0].ab;
-+ current_vectors[0].ib = requested_vectors[0].ib;
-+ }
-+
-+ if (clstate.enable) {
-+ MSM_BUS_DBG("Updating request for shell client, index: %d\n",
-+ clstate.current_index);
-+ ret = msm_bus_scale_client_update_request(clstate.cl,
-+ clstate.current_index);
-+ } else
-+ MSM_BUS_DBG("Enable bit not set. Skipping update request\n");
-+
-+ return ret;
-+}
-+
-+static void msm_bus_dbg_unregister_client(uint32_t cl)
-+{
-+ MSM_BUS_DBG("Unregistering shell client\n");
-+ msm_bus_scale_unregister_client(clstate.cl);
-+ clstate.cl = 0;
-+}
-+
-+static uint32_t msm_bus_dbg_register_client(void)
-+{
-+ int ret = 0;
-+
-+ if (init_vectors[0].src != requested_vectors[0].src) {
-+ MSM_BUS_DBG("Shell client master changed. Unregistering\n");
-+ msm_bus_dbg_unregister_client(clstate.cl);
-+ }
-+ if (init_vectors[0].dst != requested_vectors[0].dst) {
-+ MSM_BUS_DBG("Shell client slave changed. Unregistering\n");
-+ msm_bus_dbg_unregister_client(clstate.cl);
-+ }
-+
-+ current_vectors[0].src = init_vectors[0].src;
-+ requested_vectors[0].src = init_vectors[0].src;
-+ current_vectors[0].dst = init_vectors[0].dst;
-+ requested_vectors[0].dst = init_vectors[0].dst;
-+
-+ if (!clstate.enable) {
-+ MSM_BUS_DBG("Enable bit not set, skipping registration: cl "
-+ "%d\n", clstate.cl);
-+ return 0;
-+ }
-+
-+ if (clstate.cl) {
-+ MSM_BUS_DBG("Client registered, skipping registration\n");
-+ return clstate.cl;
-+ }
-+
-+ MSM_BUS_DBG("Registering shell client\n");
-+ ret = msm_bus_scale_register_client(&shell_client);
-+ return ret;
-+}
-+
-+static int msm_bus_dbg_mas_get(void *data, u64 *val)
-+{
-+ *val = init_vectors[0].src;
-+ MSM_BUS_DBG("Get master: %llu\n", *val);
-+ return 0;
-+}
-+
-+static int msm_bus_dbg_mas_set(void *data, u64 val)
-+{
-+ init_vectors[0].src = val;
-+ MSM_BUS_DBG("Set master: %llu\n", val);
-+ clstate.cl = msm_bus_dbg_register_client();
-+ return 0;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(shell_client_mas_fops, msm_bus_dbg_mas_get,
-+ msm_bus_dbg_mas_set, "%llu\n");
-+
-+static int msm_bus_dbg_slv_get(void *data, u64 *val)
-+{
-+ *val = init_vectors[0].dst;
-+ MSM_BUS_DBG("Get slave: %llu\n", *val);
-+ return 0;
-+}
-+
-+static int msm_bus_dbg_slv_set(void *data, u64 val)
-+{
-+ init_vectors[0].dst = val;
-+ MSM_BUS_DBG("Set slave: %llu\n", val);
-+ clstate.cl = msm_bus_dbg_register_client();
-+ return 0;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(shell_client_slv_fops, msm_bus_dbg_slv_get,
-+ msm_bus_dbg_slv_set, "%llu\n");
-+
-+static int msm_bus_dbg_ab_get(void *data, u64 *val)
-+{
-+ *val = requested_vectors[0].ab;
-+ MSM_BUS_DBG("Get ab: %llu\n", *val);
-+ return 0;
-+}
-+
-+static int msm_bus_dbg_ab_set(void *data, u64 val)
-+{
-+ requested_vectors[0].ab = val;
-+ MSM_BUS_DBG("Set ab: %llu\n", val);
-+ return 0;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(shell_client_ab_fops, msm_bus_dbg_ab_get,
-+ msm_bus_dbg_ab_set, "%llu\n");
-+
-+static int msm_bus_dbg_ib_get(void *data, u64 *val)
-+{
-+ *val = requested_vectors[0].ib;
-+ MSM_BUS_DBG("Get ib: %llu\n", *val);
-+ return 0;
-+}
-+
-+static int msm_bus_dbg_ib_set(void *data, u64 val)
-+{
-+ requested_vectors[0].ib = val;
-+ MSM_BUS_DBG("Set ib: %llu\n", val);
-+ return 0;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(shell_client_ib_fops, msm_bus_dbg_ib_get,
-+ msm_bus_dbg_ib_set, "%llu\n");
-+
-+static int msm_bus_dbg_en_get(void *data, u64 *val)
-+{
-+ *val = clstate.enable;
-+ MSM_BUS_DBG("Get enable: %llu\n", *val);
-+ return 0;
-+}
-+
-+static int msm_bus_dbg_en_set(void *data, u64 val)
-+{
-+ int ret = 0;
-+
-+ clstate.enable = val;
-+ if (clstate.enable) {
-+ if (!clstate.cl) {
-+ MSM_BUS_DBG("client: %u\n", clstate.cl);
-+ clstate.cl = msm_bus_dbg_register_client();
-+ if (clstate.cl)
-+ ret = msm_bus_dbg_update_cl_request(clstate.cl);
-+ } else {
-+ MSM_BUS_DBG("update request for cl: %u\n", clstate.cl);
-+ ret = msm_bus_dbg_update_cl_request(clstate.cl);
-+ }
-+ }
-+
-+ MSM_BUS_DBG("Set enable: %llu\n", val);
-+ return ret;
-+}
-+DEFINE_SIMPLE_ATTRIBUTE(shell_client_en_fops, msm_bus_dbg_en_get,
-+ msm_bus_dbg_en_set, "%llu\n");
-+
-+/**
-+ * The following funtions are used for viewing the client data
-+ * and changing the client request at run-time
-+ */
-+
-+static ssize_t client_data_read(struct file *file, char __user *buf,
-+ size_t count, loff_t *ppos)
-+{
-+ int bsize = 0;
-+ uint32_t cl = (uint32_t)(uintptr_t)file->private_data;
-+ struct msm_bus_cldata *cldata = NULL;
-+ int found = 0;
-+
-+ list_for_each_entry(cldata, &cl_list, list) {
-+ if (cldata->clid == cl) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+ if (!found)
-+ return 0;
-+
-+ bsize = cldata->size;
-+ return simple_read_from_buffer(buf, count, ppos,
-+ cldata->buffer, bsize);
-+}
-+
-+static int client_data_open(struct inode *inode, struct file *file)
-+{
-+ file->private_data = inode->i_private;
-+ return 0;
-+}
-+
-+static const struct file_operations client_data_fops = {
-+ .open = client_data_open,
-+ .read = client_data_read,
-+};
-+
-+struct dentry *msm_bus_dbg_create(const char *name, mode_t mode,
-+ struct dentry *dent, uint32_t clid)
-+{
-+ if (dent == NULL) {
-+ MSM_BUS_DBG("debugfs not ready yet\n");
-+ return NULL;
-+ }
-+ return debugfs_create_file(name, mode, dent, (void *)(uintptr_t)clid,
-+ &client_data_fops);
-+}
-+
-+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
-+static int msm_bus_dbg_record_client(const struct msm_bus_scale_pdata *pdata,
-+ int index, uint32_t clid, struct dentry *file)
-+{
-+ struct msm_bus_cldata *cldata;
-+
-+ cldata = kmalloc(sizeof(struct msm_bus_cldata), GFP_KERNEL);
-+ if (!cldata) {
-+ MSM_BUS_DBG("Failed to allocate memory for client data\n");
-+ return -ENOMEM;
-+ }
-+ cldata->pdata = pdata;
-+ cldata->index = index;
-+ cldata->clid = clid;
-+ cldata->file = file;
-+ cldata->size = 0;
-+ list_add_tail(&cldata->list, &cl_list);
-+ return 0;
-+}
-+
-+static void msm_bus_dbg_free_client(uint32_t clid)
-+{
-+ struct msm_bus_cldata *cldata = NULL;
-+
-+ list_for_each_entry(cldata, &cl_list, list) {
-+ if (cldata->clid == clid) {
-+ debugfs_remove(cldata->file);
-+ list_del(&cldata->list);
-+ kfree(cldata);
-+ break;
-+ }
-+ }
-+}
-+
-+static int msm_bus_dbg_fill_cl_buffer(const struct msm_bus_scale_pdata *pdata,
-+ int index, uint32_t clid)
-+{
-+ int i = 0, j;
-+ char *buf = NULL;
-+ struct msm_bus_cldata *cldata = NULL;
-+ struct timespec ts;
-+ int found = 0;
-+
-+ list_for_each_entry(cldata, &cl_list, list) {
-+ if (cldata->clid == clid) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ if (!found)
-+ return -ENOENT;
-+
-+ if (cldata->file == NULL) {
-+ if (pdata->name == NULL) {
-+ MSM_BUS_DBG("Client doesn't have a name\n");
-+ return -EINVAL;
-+ }
-+ cldata->file = msm_bus_dbg_create(pdata->name, S_IRUGO,
-+ clients, clid);
-+ }
-+
-+ if (cldata->size < (MAX_BUFF_SIZE - FILL_LIMIT))
-+ i = cldata->size;
-+ else {
-+ i = 0;
-+ cldata->size = 0;
-+ }
-+ buf = cldata->buffer;
-+ ts = ktime_to_timespec(ktime_get());
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n%d.%d\n",
-+ (int)ts.tv_sec, (int)ts.tv_nsec);
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "curr : %d\n", index);
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "masters: ");
-+
-+ for (j = 0; j < pdata->usecase->num_paths; j++)
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%d ",
-+ pdata->usecase[index].vectors[j].src);
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nslaves : ");
-+ for (j = 0; j < pdata->usecase->num_paths; j++)
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%d ",
-+ pdata->usecase[index].vectors[j].dst);
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nab : ");
-+ for (j = 0; j < pdata->usecase->num_paths; j++)
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%llu ",
-+ pdata->usecase[index].vectors[j].ab);
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\nib : ");
-+ for (j = 0; j < pdata->usecase->num_paths; j++)
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "%llu ",
-+ pdata->usecase[index].vectors[j].ib);
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n");
-+
-+ for (j = 0; j < pdata->usecase->num_paths; j++)
-+ trace_bus_update_request((int)ts.tv_sec, (int)ts.tv_nsec,
-+ pdata->name, index,
-+ pdata->usecase[index].vectors[j].src,
-+ pdata->usecase[index].vectors[j].dst,
-+ pdata->usecase[index].vectors[j].ab,
-+ pdata->usecase[index].vectors[j].ib);
-+
-+ cldata->size = i;
-+ return i;
-+}
-+#endif
-+
-+static int msm_bus_dbg_update_request(struct msm_bus_cldata *cldata, int index)
-+{
-+ int ret = 0;
-+
-+ if ((index < 0) || (index > cldata->pdata->num_usecases)) {
-+ MSM_BUS_DBG("Invalid index!\n");
-+ return -EINVAL;
-+ }
-+ ret = msm_bus_scale_client_update_request(cldata->clid, index);
-+ return ret;
-+}
-+
-+static ssize_t msm_bus_dbg_update_request_write(struct file *file,
-+ const char __user *ubuf, size_t cnt, loff_t *ppos)
-+{
-+ struct msm_bus_cldata *cldata;
-+ unsigned long index = 0;
-+ int ret = 0;
-+ char *chid;
-+ char *buf = kmalloc((sizeof(char) * (cnt + 1)), GFP_KERNEL);
-+ int found = 0;
-+
-+ if (!buf || IS_ERR(buf)) {
-+ MSM_BUS_ERR("Memory allocation for buffer failed\n");
-+ return -ENOMEM;
-+ }
-+ if (cnt == 0) {
-+ kfree(buf);
-+ return 0;
-+ }
-+ if (copy_from_user(buf, ubuf, cnt)) {
-+ kfree(buf);
-+ return -EFAULT;
-+ }
-+ buf[cnt] = '\0';
-+ chid = buf;
-+ MSM_BUS_DBG("buffer: %s\n size: %zu\n", buf, sizeof(ubuf));
-+
-+ list_for_each_entry(cldata, &cl_list, list) {
-+ if (strnstr(chid, cldata->pdata->name, cnt)) {
-+ found = 1;
-+ cldata = cldata;
-+ strsep(&chid, " ");
-+ if (chid) {
-+ ret = kstrtoul(chid, 10, &index);
-+ if (ret) {
-+ MSM_BUS_DBG("Index conversion"
-+ " failed\n");
-+ return -EFAULT;
-+ }
-+ } else {
-+ MSM_BUS_DBG("Error parsing input. Index not"
-+ " found\n");
-+ found = 0;
-+ }
-+ break;
-+ }
-+ }
-+
-+ if (found)
-+ msm_bus_dbg_update_request(cldata, index);
-+ kfree(buf);
-+ return cnt;
-+}
-+
-+/**
-+ * The following funtions are used for viewing the commit data
-+ * for each fabric
-+ */
-+static ssize_t fabric_data_read(struct file *file, char __user *buf,
-+ size_t count, loff_t *ppos)
-+{
-+ struct msm_bus_fab_list *fablist = NULL;
-+ int bsize = 0;
-+ ssize_t ret;
-+ const char *name = file->private_data;
-+ int found = 0;
-+
-+ mutex_lock(&msm_bus_dbg_fablist_lock);
-+ list_for_each_entry(fablist, &fabdata_list, list) {
-+ if (strcmp(fablist->name, name) == 0) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+ if (!found)
-+ return -ENOENT;
-+ bsize = fablist->size;
-+ ret = simple_read_from_buffer(buf, count, ppos,
-+ fablist->buffer, bsize);
-+ mutex_unlock(&msm_bus_dbg_fablist_lock);
-+ return ret;
-+}
-+
-+static const struct file_operations fabric_data_fops = {
-+ .open = client_data_open,
-+ .read = fabric_data_read,
-+};
-+
-+static ssize_t rules_dbg_read(struct file *file, char __user *buf,
-+ size_t count, loff_t *ppos)
-+{
-+ ssize_t ret;
-+ memset(rules_buf, 0, MAX_BUFF_SIZE);
-+ print_rules_buf(rules_buf, MAX_BUFF_SIZE);
-+ ret = simple_read_from_buffer(buf, count, ppos,
-+ rules_buf, MAX_BUFF_SIZE);
-+ return ret;
-+}
-+
-+static int rules_dbg_open(struct inode *inode, struct file *file)
-+{
-+ file->private_data = inode->i_private;
-+ return 0;
-+}
-+
-+static const struct file_operations rules_dbg_fops = {
-+ .open = rules_dbg_open,
-+ .read = rules_dbg_read,
-+};
-+
-+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
-+static int msm_bus_dbg_record_fabric(const char *fabname, struct dentry *file)
-+{
-+ struct msm_bus_fab_list *fablist;
-+ int ret = 0;
-+
-+ mutex_lock(&msm_bus_dbg_fablist_lock);
-+ fablist = kmalloc(sizeof(struct msm_bus_fab_list), GFP_KERNEL);
-+ if (!fablist) {
-+ MSM_BUS_DBG("Failed to allocate memory for commit data\n");
-+ ret = -ENOMEM;
-+ goto err;
-+ }
-+
-+ fablist->name = fabname;
-+ fablist->size = 0;
-+ list_add_tail(&fablist->list, &fabdata_list);
-+err:
-+ mutex_unlock(&msm_bus_dbg_fablist_lock);
-+ return ret;
-+}
-+
-+static void msm_bus_dbg_free_fabric(const char *fabname)
-+{
-+ struct msm_bus_fab_list *fablist = NULL;
-+
-+ mutex_lock(&msm_bus_dbg_fablist_lock);
-+ list_for_each_entry(fablist, &fabdata_list, list) {
-+ if (strcmp(fablist->name, fabname) == 0) {
-+ debugfs_remove(fablist->file);
-+ list_del(&fablist->list);
-+ kfree(fablist);
-+ break;
-+ }
-+ }
-+ mutex_unlock(&msm_bus_dbg_fablist_lock);
-+}
-+
-+static int msm_bus_dbg_fill_fab_buffer(const char *fabname,
-+ void *cdata, int nmasters, int nslaves,
-+ int ntslaves)
-+{
-+ int i;
-+ char *buf = NULL;
-+ struct msm_bus_fab_list *fablist = NULL;
-+ struct timespec ts;
-+ int found = 0;
-+
-+ mutex_lock(&msm_bus_dbg_fablist_lock);
-+ list_for_each_entry(fablist, &fabdata_list, list) {
-+ if (strcmp(fablist->name, fabname) == 0) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+ if (!found)
-+ return -ENOENT;
-+
-+ if (fablist->file == NULL) {
-+ MSM_BUS_DBG("Fabric dbg entry does not exist\n");
-+ mutex_unlock(&msm_bus_dbg_fablist_lock);
-+ return -EFAULT;
-+ }
-+
-+ if (fablist->size < MAX_BUFF_SIZE - 256)
-+ i = fablist->size;
-+ else {
-+ i = 0;
-+ fablist->size = 0;
-+ }
-+ buf = fablist->buffer;
-+ mutex_unlock(&msm_bus_dbg_fablist_lock);
-+ ts = ktime_to_timespec(ktime_get());
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n%d.%d\n",
-+ (int)ts.tv_sec, (int)ts.tv_nsec);
-+
-+ msm_bus_rpm_fill_cdata_buffer(&i, buf, MAX_BUFF_SIZE, cdata,
-+ nmasters, nslaves, ntslaves);
-+ i += scnprintf(buf + i, MAX_BUFF_SIZE - i, "\n");
-+ mutex_lock(&msm_bus_dbg_fablist_lock);
-+ fablist->size = i;
-+ mutex_unlock(&msm_bus_dbg_fablist_lock);
-+ return 0;
-+}
-+#endif
-+
-+static const struct file_operations msm_bus_dbg_update_request_fops = {
-+ .open = client_data_open,
-+ .write = msm_bus_dbg_update_request_write,
-+};
-+
-+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
-+/**
-+ * msm_bus_dbg_client_data() - Add debug data for clients
-+ * @pdata: Platform data of the client
-+ * @index: The current index or operation to be performed
-+ * @clid: Client handle obtained during registration
-+ */
-+void msm_bus_dbg_client_data(struct msm_bus_scale_pdata *pdata, int index,
-+ uint32_t clid)
-+{
-+ struct dentry *file = NULL;
-+
-+ if (index == MSM_BUS_DBG_REGISTER) {
-+ msm_bus_dbg_record_client(pdata, index, clid, file);
-+ if (!pdata->name) {
-+ MSM_BUS_DBG("Cannot create debugfs entry. Null name\n");
-+ return;
-+ }
-+ } else if (index == MSM_BUS_DBG_UNREGISTER) {
-+ msm_bus_dbg_free_client(clid);
-+ MSM_BUS_DBG("Client %d unregistered\n", clid);
-+ } else
-+ msm_bus_dbg_fill_cl_buffer(pdata, index, clid);
-+}
-+EXPORT_SYMBOL(msm_bus_dbg_client_data);
-+
-+/**
-+ * msm_bus_dbg_commit_data() - Add commit data from fabrics
-+ * @fabname: Fabric name specified in platform data
-+ * @cdata: Commit Data
-+ * @nmasters: Number of masters attached to fabric
-+ * @nslaves: Number of slaves attached to fabric
-+ * @ntslaves: Number of tiered slaves attached to fabric
-+ * @op: Operation to be performed
-+ */
-+void msm_bus_dbg_commit_data(const char *fabname, void *cdata,
-+ int nmasters, int nslaves, int ntslaves, int op)
-+{
-+ struct dentry *file = NULL;
-+
-+ if (op == MSM_BUS_DBG_REGISTER)
-+ msm_bus_dbg_record_fabric(fabname, file);
-+ else if (op == MSM_BUS_DBG_UNREGISTER)
-+ msm_bus_dbg_free_fabric(fabname);
-+ else
-+ msm_bus_dbg_fill_fab_buffer(fabname, cdata, nmasters,
-+ nslaves, ntslaves);
-+}
-+EXPORT_SYMBOL(msm_bus_dbg_commit_data);
-+#endif
-+
-+static int __init msm_bus_debugfs_init(void)
-+{
-+ struct dentry *commit, *shell_client, *rules_dbg;
-+ struct msm_bus_fab_list *fablist;
-+ struct msm_bus_cldata *cldata = NULL;
-+ uint64_t val = 0;
-+
-+ dir = debugfs_create_dir("msm-bus-dbg", NULL);
-+ if ((!dir) || IS_ERR(dir)) {
-+ MSM_BUS_ERR("Couldn't create msm-bus-dbg\n");
-+ goto err;
-+ }
-+
-+ clients = debugfs_create_dir("client-data", dir);
-+ if ((!dir) || IS_ERR(dir)) {
-+ MSM_BUS_ERR("Couldn't create clients\n");
-+ goto err;
-+ }
-+
-+ shell_client = debugfs_create_dir("shell-client", dir);
-+ if ((!dir) || IS_ERR(dir)) {
-+ MSM_BUS_ERR("Couldn't create clients\n");
-+ goto err;
-+ }
-+
-+ commit = debugfs_create_dir("commit-data", dir);
-+ if ((!dir) || IS_ERR(dir)) {
-+ MSM_BUS_ERR("Couldn't create commit\n");
-+ goto err;
-+ }
-+
-+ rules_dbg = debugfs_create_dir("rules-dbg", dir);
-+ if ((!rules_dbg) || IS_ERR(rules_dbg)) {
-+ MSM_BUS_ERR("Couldn't create rules-dbg\n");
-+ goto err;
-+ }
-+
-+ if (debugfs_create_file("print_rules", S_IRUGO | S_IWUSR,
-+ rules_dbg, &val, &rules_dbg_fops) == NULL)
-+ goto err;
-+
-+ if (debugfs_create_file("update_request", S_IRUGO | S_IWUSR,
-+ shell_client, &val, &shell_client_en_fops) == NULL)
-+ goto err;
-+ if (debugfs_create_file("ib", S_IRUGO | S_IWUSR, shell_client, &val,
-+ &shell_client_ib_fops) == NULL)
-+ goto err;
-+ if (debugfs_create_file("ab", S_IRUGO | S_IWUSR, shell_client, &val,
-+ &shell_client_ab_fops) == NULL)
-+ goto err;
-+ if (debugfs_create_file("slv", S_IRUGO | S_IWUSR, shell_client,
-+ &val, &shell_client_slv_fops) == NULL)
-+ goto err;
-+ if (debugfs_create_file("mas", S_IRUGO | S_IWUSR, shell_client,
-+ &val, &shell_client_mas_fops) == NULL)
-+ goto err;
-+ if (debugfs_create_file("update-request", S_IRUGO | S_IWUSR,
-+ clients, NULL, &msm_bus_dbg_update_request_fops) == NULL)
-+ goto err;
-+
-+ rules_buf = kzalloc(MAX_BUFF_SIZE, GFP_KERNEL);
-+ if (!rules_buf) {
-+ MSM_BUS_ERR("Failed to alloc rules_buf");
-+ goto err;
-+ }
-+
-+ list_for_each_entry(cldata, &cl_list, list) {
-+ if (cldata->pdata->name == NULL) {
-+ MSM_BUS_DBG("Client name not found\n");
-+ continue;
-+ }
-+ cldata->file = msm_bus_dbg_create(cldata->
-+ pdata->name, S_IRUGO, clients, cldata->clid);
-+ }
-+
-+ mutex_lock(&msm_bus_dbg_fablist_lock);
-+ list_for_each_entry(fablist, &fabdata_list, list) {
-+ fablist->file = debugfs_create_file(fablist->name, S_IRUGO,
-+ commit, (void *)fablist->name, &fabric_data_fops);
-+ if (fablist->file == NULL) {
-+ MSM_BUS_DBG("Cannot create files for commit data\n");
-+ kfree(rules_buf);
-+ goto err;
-+ }
-+ }
-+ mutex_unlock(&msm_bus_dbg_fablist_lock);
-+
-+ msm_bus_dbg_init_vectors();
-+ return 0;
-+err:
-+ debugfs_remove_recursive(dir);
-+ return -ENODEV;
-+}
-+late_initcall(msm_bus_debugfs_init);
-+
-+static void __exit msm_bus_dbg_teardown(void)
-+{
-+ struct msm_bus_fab_list *fablist = NULL, *fablist_temp;
-+ struct msm_bus_cldata *cldata = NULL, *cldata_temp;
-+
-+ debugfs_remove_recursive(dir);
-+ list_for_each_entry_safe(cldata, cldata_temp, &cl_list, list) {
-+ list_del(&cldata->list);
-+ kfree(cldata);
-+ }
-+ mutex_lock(&msm_bus_dbg_fablist_lock);
-+ list_for_each_entry_safe(fablist, fablist_temp, &fabdata_list, list) {
-+ list_del(&fablist->list);
-+ kfree(fablist);
-+ }
-+ kfree(rules_buf);
-+ mutex_unlock(&msm_bus_dbg_fablist_lock);
-+}
-+module_exit(msm_bus_dbg_teardown);
-+MODULE_DESCRIPTION("Debugfs for msm bus scaling client");
-+MODULE_LICENSE("GPL v2");
-+MODULE_AUTHOR("Gagan Mac <gmac@codeaurora.org>");
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_fabric_adhoc.c
-@@ -0,0 +1,1281 @@
-+/* Copyright (c) 2014, Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include "rpm-smd.h"
-+#include "msm_bus_core.h"
-+#include "msm_bus_adhoc.h"
-+#include "msm_bus_noc.h"
-+#include "msm_bus_bimc.h"
-+
-+ssize_t vrail_show(struct device *dev, struct device_attribute *attr,
-+ char *buf)
-+{
-+ struct msm_bus_node_info_type *node_info = NULL;
-+ struct msm_bus_node_device_type *bus_node = NULL;
-+
-+ bus_node = dev->platform_data;
-+ if (!bus_node)
-+ return -EINVAL;
-+ node_info = bus_node->node_info;
-+
-+ return snprintf(buf, PAGE_SIZE, "%u", node_info->vrail_comp);
-+}
-+
-+ssize_t vrail_store(struct device *dev, struct device_attribute *attr,
-+ const char *buf, size_t count)
-+{
-+ struct msm_bus_node_info_type *node_info = NULL;
-+ struct msm_bus_node_device_type *bus_node = NULL;
-+ int ret = 0;
-+
-+ bus_node = dev->platform_data;
-+ if (!bus_node)
-+ return -EINVAL;
-+ node_info = bus_node->node_info;
-+
-+ ret = sscanf(buf, "%u", &node_info->vrail_comp);
-+ if (ret != 1)
-+ return -EINVAL;
-+ return count;
-+}
-+
-+DEVICE_ATTR(vrail, 0600, vrail_show, vrail_store);
-+
-+struct static_rules_type {
-+ int num_rules;
-+ struct bus_rule_type *rules;
-+};
-+
-+static struct static_rules_type static_rules;
-+
-+static int enable_nodeclk(struct nodeclk *nclk)
-+{
-+ int ret = 0;
-+
-+ if (!nclk->enable) {
-+ ret = clk_prepare_enable(nclk->clk);
-+
-+ if (ret) {
-+ MSM_BUS_ERR("%s: failed to enable clk ", __func__);
-+ nclk->enable = false;
-+ } else
-+ nclk->enable = true;
-+ }
-+ return ret;
-+}
-+
-+static int disable_nodeclk(struct nodeclk *nclk)
-+{
-+ int ret = 0;
-+
-+ if (nclk->enable) {
-+ clk_disable_unprepare(nclk->clk);
-+ nclk->enable = false;
-+ }
-+ return ret;
-+}
-+
-+static int setrate_nodeclk(struct nodeclk *nclk, long rate)
-+{
-+ int ret = 0;
-+
-+ ret = clk_set_rate(nclk->clk, rate);
-+
-+ if (ret)
-+ MSM_BUS_ERR("%s: failed to setrate clk", __func__);
-+ return ret;
-+}
-+
-+static int msm_bus_agg_fab_clks(struct device *bus_dev, void *data)
-+{
-+ struct msm_bus_node_device_type *node = NULL;
-+ int ret = 0;
-+ int ctx = *(int *)data;
-+
-+ if (ctx >= NUM_CTX) {
-+ MSM_BUS_ERR("%s: Invalid Context %d", __func__, ctx);
-+ goto exit_agg_fab_clks;
-+ }
-+
-+ node = bus_dev->platform_data;
-+ if (!node) {
-+ MSM_BUS_ERR("%s: Can't get device info", __func__);
-+ goto exit_agg_fab_clks;
-+ }
-+
-+ if (!node->node_info->is_fab_dev) {
-+ struct msm_bus_node_device_type *bus_dev = NULL;
-+
-+ bus_dev = node->node_info->bus_device->platform_data;
-+
-+ if (node->cur_clk_hz[ctx] >= bus_dev->cur_clk_hz[ctx])
-+ bus_dev->cur_clk_hz[ctx] = node->cur_clk_hz[ctx];
-+ }
-+
-+exit_agg_fab_clks:
-+ return ret;
-+}
-+
-+static int msm_bus_reset_fab_clks(struct device *bus_dev, void *data)
-+{
-+ struct msm_bus_node_device_type *node = NULL;
-+ int ret = 0;
-+ int ctx = *(int *)data;
-+
-+ if (ctx >= NUM_CTX) {
-+ MSM_BUS_ERR("%s: Invalid Context %d", __func__, ctx);
-+ goto exit_reset_fab_clks;
-+ }
-+
-+ node = bus_dev->platform_data;
-+ if (!node) {
-+ MSM_BUS_ERR("%s: Can't get device info", __func__);
-+ goto exit_reset_fab_clks;
-+ }
-+
-+ if (node->node_info->is_fab_dev) {
-+ node->cur_clk_hz[ctx] = 0;
-+ MSM_BUS_DBG("Resetting for node %d", node->node_info->id);
-+ }
-+exit_reset_fab_clks:
-+ return ret;
-+}
-+
-+
-+static int send_rpm_msg(struct device *device)
-+{
-+ int ret = 0;
-+ int ctx;
-+ int rsc_type;
-+ struct msm_bus_node_device_type *ndev =
-+ device->platform_data;
-+ struct msm_rpm_kvp rpm_kvp;
-+
-+ if (!ndev) {
-+ MSM_BUS_ERR("%s: Error getting node info.", __func__);
-+ ret = -ENODEV;
-+ goto exit_send_rpm_msg;
-+ }
-+
-+ rpm_kvp.length = sizeof(uint64_t);
-+ rpm_kvp.key = RPM_MASTER_FIELD_BW;
-+
-+ for (ctx = MSM_RPM_CTX_ACTIVE_SET; ctx <= MSM_RPM_CTX_SLEEP_SET;
-+ ctx++) {
-+ if (ctx == MSM_RPM_CTX_ACTIVE_SET)
-+ rpm_kvp.data =
-+ (uint8_t *)&ndev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET];
-+ else {
-+ rpm_kvp.data =
-+ (uint8_t *) &ndev->node_ab.ab[MSM_RPM_CTX_SLEEP_SET];
-+ }
-+
-+ if (ndev->node_info->mas_rpm_id != -1) {
-+ rsc_type = RPM_BUS_MASTER_REQ;
-+ ret = msm_rpm_send_message(ctx, rsc_type,
-+ ndev->node_info->mas_rpm_id, &rpm_kvp, 1);
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to send RPM message:",
-+ __func__);
-+ MSM_BUS_ERR("%s:Node Id %d RPM id %d",
-+ __func__, ndev->node_info->id,
-+ ndev->node_info->mas_rpm_id);
-+ goto exit_send_rpm_msg;
-+ }
-+ }
-+
-+ if (ndev->node_info->slv_rpm_id != -1) {
-+ rsc_type = RPM_BUS_SLAVE_REQ;
-+ ret = msm_rpm_send_message(ctx, rsc_type,
-+ ndev->node_info->slv_rpm_id, &rpm_kvp, 1);
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to send RPM message:",
-+ __func__);
-+ MSM_BUS_ERR("%s: Node Id %d RPM id %d",
-+ __func__, ndev->node_info->id,
-+ ndev->node_info->slv_rpm_id);
-+ goto exit_send_rpm_msg;
-+ }
-+ }
-+ }
-+exit_send_rpm_msg:
-+ return ret;
-+}
-+
-+static int flush_bw_data(struct device *node_device, int ctx)
-+{
-+ struct msm_bus_node_device_type *node_info;
-+ int ret = 0;
-+
-+ node_info = node_device->platform_data;
-+ if (!node_info) {
-+ MSM_BUS_ERR("%s: Unable to find bus device for device",
-+ __func__);
-+ ret = -ENODEV;
-+ goto exit_flush_bw_data;
-+ }
-+
-+ if (node_info->node_ab.dirty) {
-+ if (node_info->ap_owned) {
-+ struct msm_bus_node_device_type *bus_device =
-+ node_info->node_info->bus_device->platform_data;
-+ struct msm_bus_fab_device_type *fabdev =
-+ bus_device->fabdev;
-+
-+ if (fabdev && fabdev->noc_ops.update_bw_reg &&
-+ fabdev->noc_ops.update_bw_reg
-+ (node_info->node_info->qos_params.mode))
-+ ret = fabdev->noc_ops.set_bw(node_info,
-+ fabdev->qos_base,
-+ fabdev->base_offset,
-+ fabdev->qos_off,
-+ fabdev->qos_freq);
-+ } else {
-+ ret = send_rpm_msg(node_device);
-+
-+ if (ret)
-+ MSM_BUS_ERR("%s: Failed to send RPM msg for%d",
-+ __func__, node_info->node_info->id);
-+ }
-+ node_info->node_ab.dirty = false;
-+ }
-+
-+exit_flush_bw_data:
-+ return ret;
-+
-+}
-+
-+static int flush_clk_data(struct device *node_device, int ctx)
-+{
-+ struct msm_bus_node_device_type *node;
-+ struct nodeclk *nodeclk = NULL;
-+ int ret = 0;
-+
-+ node = node_device->platform_data;
-+ if (!node) {
-+ MSM_BUS_ERR("Unable to find bus device");
-+ ret = -ENODEV;
-+ goto exit_flush_clk_data;
-+ }
-+
-+ nodeclk = &node->clk[ctx];
-+ if (node->node_info->is_fab_dev) {
-+ if (nodeclk->rate != node->cur_clk_hz[ctx]) {
-+ nodeclk->rate = node->cur_clk_hz[ctx];
-+ nodeclk->dirty = true;
-+ }
-+ }
-+
-+ if (nodeclk && nodeclk->clk && nodeclk->dirty) {
-+ long rounded_rate;
-+
-+ if (nodeclk->rate) {
-+ rounded_rate = clk_round_rate(nodeclk->clk,
-+ nodeclk->rate);
-+ ret = setrate_nodeclk(nodeclk, rounded_rate);
-+
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to set_rate %lu for %d",
-+ __func__, rounded_rate,
-+ node->node_info->id);
-+ ret = -ENODEV;
-+ goto exit_flush_clk_data;
-+ }
-+
-+ ret = enable_nodeclk(nodeclk);
-+ } else
-+ ret = disable_nodeclk(nodeclk);
-+
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to enable for %d", __func__,
-+ node->node_info->id);
-+ ret = -ENODEV;
-+ goto exit_flush_clk_data;
-+ }
-+ MSM_BUS_DBG("%s: Updated %d clk to %llu", __func__,
-+ node->node_info->id, nodeclk->rate);
-+
-+ }
-+exit_flush_clk_data:
-+ /* Reset the aggregated clock rate for fab devices*/
-+ if (node && node->node_info->is_fab_dev)
-+ node->cur_clk_hz[ctx] = 0;
-+
-+ if (nodeclk)
-+ nodeclk->dirty = 0;
-+ return ret;
-+}
-+
-+int msm_bus_commit_data(int *dirty_nodes, int ctx, int num_dirty)
-+{
-+ int ret = 0;
-+ int i = 0;
-+
-+ /* Aggregate the bus clocks */
-+ bus_for_each_dev(&msm_bus_type, NULL, (void *)&ctx,
-+ msm_bus_agg_fab_clks);
-+
-+ for (i = 0; i < num_dirty; i++) {
-+ struct device *node_device =
-+ bus_find_device(&msm_bus_type, NULL,
-+ (void *)&dirty_nodes[i],
-+ msm_bus_device_match_adhoc);
-+
-+ if (!node_device) {
-+ MSM_BUS_ERR("Can't find device for %d", dirty_nodes[i]);
-+ continue;
-+ }
-+
-+ ret = flush_bw_data(node_device, ctx);
-+ if (ret)
-+ MSM_BUS_ERR("%s: Error flushing bw data for node %d",
-+ __func__, dirty_nodes[i]);
-+
-+ ret = flush_clk_data(node_device, ctx);
-+ if (ret)
-+ MSM_BUS_ERR("%s: Error flushing clk data for node %d",
-+ __func__, dirty_nodes[i]);
-+ }
-+ kfree(dirty_nodes);
-+ /* Aggregate the bus clocks */
-+ bus_for_each_dev(&msm_bus_type, NULL, (void *)&ctx,
-+ msm_bus_reset_fab_clks);
-+ return ret;
-+}
-+
-+void *msm_bus_realloc_devmem(struct device *dev, void *p, size_t old_size,
-+ size_t new_size, gfp_t flags)
-+{
-+ void *ret;
-+ size_t copy_size = old_size;
-+
-+ if (!new_size) {
-+ devm_kfree(dev, p);
-+ return ZERO_SIZE_PTR;
-+ }
-+
-+ if (new_size < old_size)
-+ copy_size = new_size;
-+
-+ ret = devm_kzalloc(dev, new_size, flags);
-+ if (!ret) {
-+ MSM_BUS_ERR("%s: Error Reallocating memory", __func__);
-+ goto exit_realloc_devmem;
-+ }
-+
-+ memcpy(ret, p, copy_size);
-+ devm_kfree(dev, p);
-+exit_realloc_devmem:
-+ return ret;
-+}
-+
-+
-+static int add_dirty_node(int **dirty_nodes, int id, int *num_dirty)
-+{
-+ int i;
-+ int found = 0;
-+ int ret = 0;
-+ int *dnode = NULL;
-+
-+ for (i = 0; i < *num_dirty; i++) {
-+ if ((*dirty_nodes)[i] == id) {
-+ found = 1;
-+ break;
-+ }
-+ }
-+
-+ if (!found) {
-+ (*num_dirty)++;
-+ dnode =
-+ krealloc(*dirty_nodes, sizeof(int) * (*num_dirty),
-+ GFP_KERNEL);
-+
-+ if (ZERO_OR_NULL_PTR(dnode)) {
-+ MSM_BUS_ERR("%s: Failure allocating dirty nodes array",
-+ __func__);
-+ ret = -ENOMEM;
-+ } else {
-+ *dirty_nodes = dnode;
-+ (*dirty_nodes)[(*num_dirty) - 1] = id;
-+ }
-+ }
-+
-+ return ret;
-+}
-+
-+int msm_bus_update_bw(struct msm_bus_node_device_type *nodedev, int ctx,
-+ int64_t add_bw, int **dirty_nodes, int *num_dirty)
-+{
-+ int ret = 0;
-+ int i, j;
-+ uint64_t cur_ab_slp = 0;
-+ uint64_t cur_ab_act = 0;
-+
-+ if (nodedev->node_info->virt_dev)
-+ goto exit_update_bw;
-+
-+ for (i = 0; i < NUM_CTX; i++) {
-+ for (j = 0; j < nodedev->num_lnodes; j++) {
-+ if (i == DUAL_CTX) {
-+ cur_ab_act +=
-+ nodedev->lnode_list[j].lnode_ab[i];
-+ cur_ab_slp +=
-+ nodedev->lnode_list[j].lnode_ab[i];
-+ } else
-+ cur_ab_act +=
-+ nodedev->lnode_list[j].lnode_ab[i];
-+ }
-+ }
-+
-+ if (nodedev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET] != cur_ab_act) {
-+ nodedev->node_ab.ab[MSM_RPM_CTX_ACTIVE_SET] = cur_ab_act;
-+ nodedev->node_ab.ab[MSM_RPM_CTX_SLEEP_SET] = cur_ab_slp;
-+ nodedev->node_ab.dirty = true;
-+ ret = add_dirty_node(dirty_nodes, nodedev->node_info->id,
-+ num_dirty);
-+
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__,
-+ nodedev->node_info->id);
-+ goto exit_update_bw;
-+ }
-+ }
-+
-+exit_update_bw:
-+ return ret;
-+}
-+
-+int msm_bus_update_clks(struct msm_bus_node_device_type *nodedev,
-+ int ctx, int **dirty_nodes, int *num_dirty)
-+{
-+ int status = 0;
-+ struct nodeclk *nodeclk;
-+ struct nodeclk *busclk;
-+ struct msm_bus_node_device_type *bus_info = NULL;
-+ uint64_t req_clk;
-+
-+ bus_info = nodedev->node_info->bus_device->platform_data;
-+
-+ if (!bus_info) {
-+ MSM_BUS_ERR("%s: Unable to find bus device for device %d",
-+ __func__, nodedev->node_info->id);
-+ status = -ENODEV;
-+ goto exit_set_clks;
-+ }
-+
-+ req_clk = nodedev->cur_clk_hz[ctx];
-+ busclk = &bus_info->clk[ctx];
-+
-+ if (busclk->rate != req_clk) {
-+ busclk->rate = req_clk;
-+ busclk->dirty = 1;
-+ MSM_BUS_DBG("%s: Modifying bus clk %d Rate %llu", __func__,
-+ bus_info->node_info->id, req_clk);
-+ status = add_dirty_node(dirty_nodes, bus_info->node_info->id,
-+ num_dirty);
-+
-+ if (status) {
-+ MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__,
-+ bus_info->node_info->id);
-+ goto exit_set_clks;
-+ }
-+ }
-+
-+ req_clk = nodedev->cur_clk_hz[ctx];
-+ nodeclk = &nodedev->clk[ctx];
-+
-+ if (IS_ERR_OR_NULL(nodeclk))
-+ goto exit_set_clks;
-+
-+ if (!nodeclk->dirty || (nodeclk->dirty && (nodeclk->rate < req_clk))) {
-+ nodeclk->rate = req_clk;
-+ nodeclk->dirty = 1;
-+ MSM_BUS_DBG("%s: Modifying node clk %d Rate %llu", __func__,
-+ nodedev->node_info->id, req_clk);
-+ status = add_dirty_node(dirty_nodes, nodedev->node_info->id,
-+ num_dirty);
-+ if (status) {
-+ MSM_BUS_ERR("%s: Failed to add dirty node %d", __func__,
-+ nodedev->node_info->id);
-+ goto exit_set_clks;
-+ }
-+ }
-+
-+exit_set_clks:
-+ return status;
-+}
-+
-+static void msm_bus_fab_init_noc_ops(struct msm_bus_node_device_type *bus_dev)
-+{
-+ switch (bus_dev->fabdev->bus_type) {
-+ case MSM_BUS_NOC:
-+ msm_bus_noc_set_ops(bus_dev);
-+ break;
-+ case MSM_BUS_BIMC:
-+ msm_bus_bimc_set_ops(bus_dev);
-+ break;
-+ default:
-+ MSM_BUS_ERR("%s: Invalid Bus type", __func__);
-+ }
-+}
-+
-+static int msm_bus_qos_disable_clk(struct msm_bus_node_device_type *node,
-+ int disable_bus_qos_clk)
-+{
-+ struct msm_bus_node_device_type *bus_node = NULL;
-+ int ret = 0;
-+
-+ if (!node) {
-+ ret = -ENXIO;
-+ goto exit_disable_qos_clk;
-+ }
-+
-+ bus_node = node->node_info->bus_device->platform_data;
-+
-+ if (!bus_node) {
-+ ret = -ENXIO;
-+ goto exit_disable_qos_clk;
-+ }
-+
-+ if (disable_bus_qos_clk)
-+ ret = disable_nodeclk(&bus_node->clk[DUAL_CTX]);
-+
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to disable bus clk, node %d",
-+ __func__, node->node_info->id);
-+ goto exit_disable_qos_clk;
-+ }
-+
-+ if (!IS_ERR_OR_NULL(node->qos_clk.clk)) {
-+ ret = disable_nodeclk(&node->qos_clk);
-+
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to disable mas qos clk,node %d",
-+ __func__, node->node_info->id);
-+ goto exit_disable_qos_clk;
-+ }
-+ }
-+
-+exit_disable_qos_clk:
-+ return ret;
-+}
-+
-+static int msm_bus_qos_enable_clk(struct msm_bus_node_device_type *node)
-+{
-+ struct msm_bus_node_device_type *bus_node = NULL;
-+ long rounded_rate;
-+ int ret = 0;
-+ int bus_qos_enabled = 0;
-+
-+ if (!node) {
-+ ret = -ENXIO;
-+ goto exit_enable_qos_clk;
-+ }
-+
-+ bus_node = node->node_info->bus_device->platform_data;
-+
-+ if (!bus_node) {
-+ ret = -ENXIO;
-+ goto exit_enable_qos_clk;
-+ }
-+
-+ /* Check if the bus clk is already set before trying to set it
-+ * Do this only during
-+ * a. Bootup
-+ * b. Only for bus clks
-+ **/
-+ if (!clk_get_rate(bus_node->clk[DUAL_CTX].clk)) {
-+ rounded_rate = clk_round_rate(bus_node->clk[DUAL_CTX].clk, 1);
-+ ret = setrate_nodeclk(&bus_node->clk[DUAL_CTX], rounded_rate);
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to set bus clk, node %d",
-+ __func__, node->node_info->id);
-+ goto exit_enable_qos_clk;
-+ }
-+
-+ ret = enable_nodeclk(&bus_node->clk[DUAL_CTX]);
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to enable bus clk, node %d",
-+ __func__, node->node_info->id);
-+ goto exit_enable_qos_clk;
-+ }
-+ bus_qos_enabled = 1;
-+ }
-+
-+ if (!IS_ERR_OR_NULL(node->qos_clk.clk)) {
-+ rounded_rate = clk_round_rate(node->qos_clk.clk, 1);
-+ ret = setrate_nodeclk(&node->qos_clk, rounded_rate);
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Failed to enable mas qos clk, node %d",
-+ __func__, node->node_info->id);
-+ goto exit_enable_qos_clk;
-+ }
-+
-+ ret = enable_nodeclk(&node->qos_clk);
-+ if (ret) {
-+ MSM_BUS_ERR("Err enable mas qos clk, node %d ret %d",
-+ node->node_info->id, ret);
-+ goto exit_enable_qos_clk;
-+ }
-+ }
-+ ret = bus_qos_enabled;
-+
-+exit_enable_qos_clk:
-+ return ret;
-+}
-+
-+int msm_bus_enable_limiter(struct msm_bus_node_device_type *node_dev,
-+ bool enable, uint64_t lim_bw)
-+{
-+ int ret = 0;
-+ struct msm_bus_node_device_type *bus_node_dev;
-+
-+ if (!node_dev) {
-+ MSM_BUS_ERR("No device specified");
-+ ret = -ENXIO;
-+ goto exit_enable_limiter;
-+ }
-+
-+ if (!node_dev->ap_owned) {
-+ MSM_BUS_ERR("Device is not AP owned %d.",
-+ node_dev->node_info->id);
-+ ret = -ENXIO;
-+ goto exit_enable_limiter;
-+ }
-+
-+ bus_node_dev = node_dev->node_info->bus_device->platform_data;
-+ if (!bus_node_dev) {
-+ MSM_BUS_ERR("Unable to get bus device infofor %d",
-+ node_dev->node_info->id);
-+ ret = -ENXIO;
-+ goto exit_enable_limiter;
-+ }
-+ if (bus_node_dev->fabdev &&
-+ bus_node_dev->fabdev->noc_ops.limit_mport) {
-+ ret = msm_bus_qos_enable_clk(node_dev);
-+ if (ret < 0) {
-+ MSM_BUS_ERR("Can't Enable QoS clk %d",
-+ node_dev->node_info->id);
-+ goto exit_enable_limiter;
-+ }
-+ bus_node_dev->fabdev->noc_ops.limit_mport(
-+ node_dev,
-+ bus_node_dev->fabdev->qos_base,
-+ bus_node_dev->fabdev->base_offset,
-+ bus_node_dev->fabdev->qos_off,
-+ bus_node_dev->fabdev->qos_freq,
-+ enable, lim_bw);
-+ msm_bus_qos_disable_clk(node_dev, ret);
-+ }
-+
-+exit_enable_limiter:
-+ return ret;
-+}
-+
-+static int msm_bus_dev_init_qos(struct device *dev, void *data)
-+{
-+ int ret = 0;
-+ struct msm_bus_node_device_type *node_dev = NULL;
-+
-+ node_dev = dev->platform_data;
-+
-+ if (!node_dev) {
-+ MSM_BUS_ERR("%s: Unable to get node device info" , __func__);
-+ ret = -ENXIO;
-+ goto exit_init_qos;
-+ }
-+
-+ MSM_BUS_DBG("Device = %d", node_dev->node_info->id);
-+
-+ if (node_dev->ap_owned) {
-+ struct msm_bus_node_device_type *bus_node_info;
-+
-+ bus_node_info = node_dev->node_info->bus_device->platform_data;
-+
-+ if (!bus_node_info) {
-+ MSM_BUS_ERR("%s: Unable to get bus device infofor %d",
-+ __func__,
-+ node_dev->node_info->id);
-+ ret = -ENXIO;
-+ goto exit_init_qos;
-+ }
-+
-+ if (bus_node_info->fabdev &&
-+ bus_node_info->fabdev->noc_ops.qos_init) {
-+ int ret = 0;
-+
-+ if (node_dev->ap_owned &&
-+ (node_dev->node_info->qos_params.mode) != -1) {
-+
-+ if (bus_node_info->fabdev->bypass_qos_prg)
-+ goto exit_init_qos;
-+
-+ ret = msm_bus_qos_enable_clk(node_dev);
-+ if (ret < 0) {
-+ MSM_BUS_ERR("Can't Enable QoS clk %d",
-+ node_dev->node_info->id);
-+ goto exit_init_qos;
-+ }
-+
-+ bus_node_info->fabdev->noc_ops.qos_init(
-+ node_dev,
-+ bus_node_info->fabdev->qos_base,
-+ bus_node_info->fabdev->base_offset,
-+ bus_node_info->fabdev->qos_off,
-+ bus_node_info->fabdev->qos_freq);
-+ msm_bus_qos_disable_clk(node_dev, ret);
-+ }
-+ } else
-+ MSM_BUS_ERR("%s: Skipping QOS init for %d",
-+ __func__, node_dev->node_info->id);
-+ }
-+exit_init_qos:
-+ return ret;
-+}
-+
-+static int msm_bus_fabric_init(struct device *dev,
-+ struct msm_bus_node_device_type *pdata)
-+{
-+ struct msm_bus_fab_device_type *fabdev;
-+ struct msm_bus_node_device_type *node_dev = NULL;
-+ int ret = 0;
-+
-+ node_dev = dev->platform_data;
-+ if (!node_dev) {
-+ MSM_BUS_ERR("%s: Unable to get bus device info" , __func__);
-+ ret = -ENXIO;
-+ goto exit_fabric_init;
-+ }
-+
-+ if (node_dev->node_info->virt_dev) {
-+ MSM_BUS_ERR("%s: Skip Fab init for virtual device %d", __func__,
-+ node_dev->node_info->id);
-+ goto exit_fabric_init;
-+ }
-+
-+ fabdev = devm_kzalloc(dev, sizeof(struct msm_bus_fab_device_type),
-+ GFP_KERNEL);
-+ if (!fabdev) {
-+ MSM_BUS_ERR("Fabric alloc failed\n");
-+ ret = -ENOMEM;
-+ goto exit_fabric_init;
-+ }
-+
-+ node_dev->fabdev = fabdev;
-+ fabdev->pqos_base = pdata->fabdev->pqos_base;
-+ fabdev->qos_range = pdata->fabdev->qos_range;
-+ fabdev->base_offset = pdata->fabdev->base_offset;
-+ fabdev->qos_off = pdata->fabdev->qos_off;
-+ fabdev->qos_freq = pdata->fabdev->qos_freq;
-+ fabdev->bus_type = pdata->fabdev->bus_type;
-+ fabdev->bypass_qos_prg = pdata->fabdev->bypass_qos_prg;
-+ fabdev->util_fact = pdata->fabdev->util_fact;
-+ fabdev->vrail_comp = pdata->fabdev->vrail_comp;
-+ msm_bus_fab_init_noc_ops(node_dev);
-+
-+ fabdev->qos_base = devm_ioremap(dev,
-+ fabdev->pqos_base, fabdev->qos_range);
-+ if (!fabdev->qos_base) {
-+ MSM_BUS_ERR("%s: Error remapping address 0x%zx :bus device %d",
-+ __func__,
-+ (size_t)fabdev->pqos_base, node_dev->node_info->id);
-+ ret = -ENOMEM;
-+ goto exit_fabric_init;
-+ }
-+
-+ /*if (msmbus_coresight_init(pdev))
-+ pr_warn("Coresight support absent for bus: %d\n", pdata->id);*/
-+exit_fabric_init:
-+ return ret;
-+}
-+
-+static int msm_bus_init_clk(struct device *bus_dev,
-+ struct msm_bus_node_device_type *pdata)
-+{
-+ unsigned int ctx;
-+ int ret = 0;
-+ struct msm_bus_node_device_type *node_dev = bus_dev->platform_data;
-+
-+ for (ctx = 0; ctx < NUM_CTX; ctx++) {
-+ if (!IS_ERR_OR_NULL(pdata->clk[ctx].clk)) {
-+ node_dev->clk[ctx].clk = pdata->clk[ctx].clk;
-+ node_dev->clk[ctx].enable = false;
-+ node_dev->clk[ctx].dirty = false;
-+ MSM_BUS_ERR("%s: Valid node clk node %d ctx %d",
-+ __func__, node_dev->node_info->id, ctx);
-+ }
-+ }
-+
-+ if (!IS_ERR_OR_NULL(pdata->qos_clk.clk)) {
-+ node_dev->qos_clk.clk = pdata->qos_clk.clk;
-+ node_dev->qos_clk.enable = false;
-+ MSM_BUS_ERR("%s: Valid Iface clk node %d", __func__,
-+ node_dev->node_info->id);
-+ }
-+
-+ return ret;
-+}
-+
-+static int msm_bus_copy_node_info(struct msm_bus_node_device_type *pdata,
-+ struct device *bus_dev)
-+{
-+ int ret = 0;
-+ struct msm_bus_node_info_type *node_info = NULL;
-+ struct msm_bus_node_info_type *pdata_node_info = NULL;
-+ struct msm_bus_node_device_type *bus_node = NULL;
-+
-+ bus_node = bus_dev->platform_data;
-+
-+ if (!bus_node || !pdata) {
-+ ret = -ENXIO;
-+ MSM_BUS_ERR("%s: Invalid pointers pdata %p, bus_node %p",
-+ __func__, pdata, bus_node);
-+ goto exit_copy_node_info;
-+ }
-+
-+ node_info = bus_node->node_info;
-+ pdata_node_info = pdata->node_info;
-+
-+ node_info->name = pdata_node_info->name;
-+ node_info->id = pdata_node_info->id;
-+ node_info->bus_device_id = pdata_node_info->bus_device_id;
-+ node_info->mas_rpm_id = pdata_node_info->mas_rpm_id;
-+ node_info->slv_rpm_id = pdata_node_info->slv_rpm_id;
-+ node_info->num_connections = pdata_node_info->num_connections;
-+ node_info->num_blist = pdata_node_info->num_blist;
-+ node_info->num_qports = pdata_node_info->num_qports;
-+ node_info->buswidth = pdata_node_info->buswidth;
-+ node_info->virt_dev = pdata_node_info->virt_dev;
-+ node_info->is_fab_dev = pdata_node_info->is_fab_dev;
-+ node_info->qos_params.mode = pdata_node_info->qos_params.mode;
-+ node_info->qos_params.prio1 = pdata_node_info->qos_params.prio1;
-+ node_info->qos_params.prio0 = pdata_node_info->qos_params.prio0;
-+ node_info->qos_params.prio_lvl = pdata_node_info->qos_params.prio_lvl;
-+ node_info->qos_params.prio_rd = pdata_node_info->qos_params.prio_rd;
-+ node_info->qos_params.prio_wr = pdata_node_info->qos_params.prio_wr;
-+ node_info->qos_params.gp = pdata_node_info->qos_params.gp;
-+ node_info->qos_params.thmp = pdata_node_info->qos_params.thmp;
-+ node_info->qos_params.ws = pdata_node_info->qos_params.ws;
-+ node_info->qos_params.bw_buffer = pdata_node_info->qos_params.bw_buffer;
-+ node_info->util_fact = pdata_node_info->util_fact;
-+ node_info->vrail_comp = pdata_node_info->vrail_comp;
-+
-+ node_info->dev_connections = devm_kzalloc(bus_dev,
-+ sizeof(struct device *) *
-+ pdata_node_info->num_connections,
-+ GFP_KERNEL);
-+ if (!node_info->dev_connections) {
-+ MSM_BUS_ERR("%s:Bus dev connections alloc failed\n", __func__);
-+ ret = -ENOMEM;
-+ goto exit_copy_node_info;
-+ }
-+
-+ node_info->connections = devm_kzalloc(bus_dev,
-+ sizeof(int) * pdata_node_info->num_connections,
-+ GFP_KERNEL);
-+ if (!node_info->connections) {
-+ MSM_BUS_ERR("%s:Bus connections alloc failed\n", __func__);
-+ devm_kfree(bus_dev, node_info->dev_connections);
-+ ret = -ENOMEM;
-+ goto exit_copy_node_info;
-+ }
-+
-+ memcpy(node_info->connections,
-+ pdata_node_info->connections,
-+ sizeof(int) * pdata_node_info->num_connections);
-+
-+ node_info->black_connections = devm_kzalloc(bus_dev,
-+ sizeof(struct device *) *
-+ pdata_node_info->num_blist,
-+ GFP_KERNEL);
-+ if (!node_info->black_connections) {
-+ MSM_BUS_ERR("%s: Bus black connections alloc failed\n",
-+ __func__);
-+ devm_kfree(bus_dev, node_info->dev_connections);
-+ devm_kfree(bus_dev, node_info->connections);
-+ ret = -ENOMEM;
-+ goto exit_copy_node_info;
-+ }
-+
-+ node_info->black_listed_connections = devm_kzalloc(bus_dev,
-+ pdata_node_info->num_blist * sizeof(int),
-+ GFP_KERNEL);
-+ if (!node_info->black_listed_connections) {
-+ MSM_BUS_ERR("%s:Bus black list connections alloc failed\n",
-+ __func__);
-+ devm_kfree(bus_dev, node_info->black_connections);
-+ devm_kfree(bus_dev, node_info->dev_connections);
-+ devm_kfree(bus_dev, node_info->connections);
-+ ret = -ENOMEM;
-+ goto exit_copy_node_info;
-+ }
-+
-+ memcpy(node_info->black_listed_connections,
-+ pdata_node_info->black_listed_connections,
-+ sizeof(int) * pdata_node_info->num_blist);
-+
-+ node_info->qport = devm_kzalloc(bus_dev,
-+ sizeof(int) * pdata_node_info->num_qports,
-+ GFP_KERNEL);
-+ if (!node_info->qport) {
-+ MSM_BUS_ERR("%s:Bus qport allocation failed\n", __func__);
-+ devm_kfree(bus_dev, node_info->dev_connections);
-+ devm_kfree(bus_dev, node_info->connections);
-+ devm_kfree(bus_dev, node_info->black_listed_connections);
-+ ret = -ENOMEM;
-+ goto exit_copy_node_info;
-+ }
-+
-+ memcpy(node_info->qport,
-+ pdata_node_info->qport,
-+ sizeof(int) * pdata_node_info->num_qports);
-+
-+exit_copy_node_info:
-+ return ret;
-+}
-+
-+static struct device *msm_bus_device_init(
-+ struct msm_bus_node_device_type *pdata)
-+{
-+ struct device *bus_dev = NULL;
-+ struct msm_bus_node_device_type *bus_node = NULL;
-+ struct msm_bus_node_info_type *node_info = NULL;
-+ int ret = 0;
-+
-+ bus_dev = kzalloc(sizeof(struct device), GFP_KERNEL);
-+ if (!bus_dev) {
-+ MSM_BUS_ERR("%s:Device alloc failed\n", __func__);
-+ bus_dev = NULL;
-+ goto exit_device_init;
-+ }
-+ /**
-+ * Init here so we can use devm calls
-+ */
-+ device_initialize(bus_dev);
-+
-+ bus_node = devm_kzalloc(bus_dev,
-+ sizeof(struct msm_bus_node_device_type), GFP_KERNEL);
-+ if (!bus_node) {
-+ MSM_BUS_ERR("%s:Bus node alloc failed\n", __func__);
-+ kfree(bus_dev);
-+ bus_dev = NULL;
-+ goto exit_device_init;
-+ }
-+
-+ node_info = devm_kzalloc(bus_dev,
-+ sizeof(struct msm_bus_node_info_type), GFP_KERNEL);
-+ if (!node_info) {
-+ MSM_BUS_ERR("%s:Bus node info alloc failed\n", __func__);
-+ devm_kfree(bus_dev, bus_node);
-+ kfree(bus_dev);
-+ bus_dev = NULL;
-+ goto exit_device_init;
-+ }
-+
-+ bus_node->node_info = node_info;
-+ bus_node->ap_owned = pdata->ap_owned;
-+ bus_dev->platform_data = bus_node;
-+
-+ if (msm_bus_copy_node_info(pdata, bus_dev) < 0) {
-+ devm_kfree(bus_dev, bus_node);
-+ devm_kfree(bus_dev, node_info);
-+ kfree(bus_dev);
-+ bus_dev = NULL;
-+ goto exit_device_init;
-+ }
-+
-+ bus_dev->bus = &msm_bus_type;
-+ dev_set_name(bus_dev, bus_node->node_info->name);
-+
-+ ret = device_add(bus_dev);
-+ if (ret < 0) {
-+ MSM_BUS_ERR("%s: Error registering device %d",
-+ __func__, pdata->node_info->id);
-+ devm_kfree(bus_dev, bus_node);
-+ devm_kfree(bus_dev, node_info->dev_connections);
-+ devm_kfree(bus_dev, node_info->connections);
-+ devm_kfree(bus_dev, node_info->black_connections);
-+ devm_kfree(bus_dev, node_info->black_listed_connections);
-+ devm_kfree(bus_dev, node_info);
-+ kfree(bus_dev);
-+ bus_dev = NULL;
-+ goto exit_device_init;
-+ }
-+ device_create_file(bus_dev, &dev_attr_vrail);
-+
-+exit_device_init:
-+ return bus_dev;
-+}
-+
-+static int msm_bus_setup_dev_conn(struct device *bus_dev, void *data)
-+{
-+ struct msm_bus_node_device_type *bus_node = NULL;
-+ int ret = 0;
-+ int j;
-+
-+ bus_node = bus_dev->platform_data;
-+ if (!bus_node) {
-+ MSM_BUS_ERR("%s: Can't get device info", __func__);
-+ ret = -ENODEV;
-+ goto exit_setup_dev_conn;
-+ }
-+
-+ /* Setup parent bus device for this node */
-+ if (!bus_node->node_info->is_fab_dev) {
-+ struct device *bus_parent_device =
-+ bus_find_device(&msm_bus_type, NULL,
-+ (void *)&bus_node->node_info->bus_device_id,
-+ msm_bus_device_match_adhoc);
-+
-+ if (!bus_parent_device) {
-+ MSM_BUS_ERR("%s: Error finding parentdev %d parent %d",
-+ __func__,
-+ bus_node->node_info->id,
-+ bus_node->node_info->bus_device_id);
-+ ret = -ENXIO;
-+ goto exit_setup_dev_conn;
-+ }
-+ bus_node->node_info->bus_device = bus_parent_device;
-+ }
-+
-+ bus_node->node_info->is_traversed = false;
-+
-+ for (j = 0; j < bus_node->node_info->num_connections; j++) {
-+ bus_node->node_info->dev_connections[j] =
-+ bus_find_device(&msm_bus_type, NULL,
-+ (void *)&bus_node->node_info->connections[j],
-+ msm_bus_device_match_adhoc);
-+
-+ if (!bus_node->node_info->dev_connections[j]) {
-+ MSM_BUS_ERR("%s: Error finding conn %d for device %d",
-+ __func__, bus_node->node_info->connections[j],
-+ bus_node->node_info->id);
-+ ret = -ENODEV;
-+ goto exit_setup_dev_conn;
-+ }
-+ }
-+
-+ for (j = 0; j < bus_node->node_info->num_blist; j++) {
-+ bus_node->node_info->black_connections[j] =
-+ bus_find_device(&msm_bus_type, NULL,
-+ (void *)&bus_node->node_info->
-+ black_listed_connections[j],
-+ msm_bus_device_match_adhoc);
-+
-+ if (!bus_node->node_info->black_connections[j]) {
-+ MSM_BUS_ERR("%s: Error finding conn %d for device %d\n",
-+ __func__, bus_node->node_info->
-+ black_listed_connections[j],
-+ bus_node->node_info->id);
-+ ret = -ENODEV;
-+ goto exit_setup_dev_conn;
-+ }
-+ }
-+
-+exit_setup_dev_conn:
-+ return ret;
-+}
-+
-+static int msm_bus_node_debug(struct device *bus_dev, void *data)
-+{
-+ int j;
-+ int ret = 0;
-+ struct msm_bus_node_device_type *bus_node = NULL;
-+
-+ bus_node = bus_dev->platform_data;
-+ if (!bus_node) {
-+ MSM_BUS_ERR("%s: Can't get device info", __func__);
-+ ret = -ENODEV;
-+ goto exit_node_debug;
-+ }
-+
-+ MSM_BUS_DBG("Device = %d buswidth %u", bus_node->node_info->id,
-+ bus_node->node_info->buswidth);
-+ for (j = 0; j < bus_node->node_info->num_connections; j++) {
-+ struct msm_bus_node_device_type *bdev =
-+ (struct msm_bus_node_device_type *)
-+ bus_node->node_info->dev_connections[j]->platform_data;
-+ MSM_BUS_DBG("\n\t Connection[%d] %d", j, bdev->node_info->id);
-+ }
-+
-+exit_node_debug:
-+ return ret;
-+}
-+
-+static int msm_bus_device_probe(struct platform_device *pdev)
-+{
-+ unsigned int i, ret;
-+ struct msm_bus_device_node_registration *pdata;
-+
-+ /* If possible, get pdata from device-tree */
-+ if (pdev->dev.of_node)
-+ pdata = msm_bus_of_to_pdata(pdev);
-+ else {
-+ pdata = (struct msm_bus_device_node_registration *)pdev->
-+ dev.platform_data;
-+ }
-+
-+ if (IS_ERR_OR_NULL(pdata)) {
-+ MSM_BUS_ERR("No platform data found");
-+ ret = -ENODATA;
-+ goto exit_device_probe;
-+ }
-+
-+ for (i = 0; i < pdata->num_devices; i++) {
-+ struct device *node_dev = NULL;
-+
-+ node_dev = msm_bus_device_init(&pdata->info[i]);
-+
-+ if (!node_dev) {
-+ MSM_BUS_ERR("%s: Error during dev init for %d",
-+ __func__, pdata->info[i].node_info->id);
-+ ret = -ENXIO;
-+ goto exit_device_probe;
-+ }
-+
-+ ret = msm_bus_init_clk(node_dev, &pdata->info[i]);
-+ /*Is this a fabric device ?*/
-+ if (pdata->info[i].node_info->is_fab_dev) {
-+ MSM_BUS_DBG("%s: %d is a fab", __func__,
-+ pdata->info[i].node_info->id);
-+ ret = msm_bus_fabric_init(node_dev, &pdata->info[i]);
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Error intializing fab %d",
-+ __func__, pdata->info[i].node_info->id);
-+ goto exit_device_probe;
-+ }
-+ }
-+ }
-+
-+ ret = bus_for_each_dev(&msm_bus_type, NULL, NULL,
-+ msm_bus_setup_dev_conn);
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Error setting up dev connections", __func__);
-+ goto exit_device_probe;
-+ }
-+
-+ ret = bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_dev_init_qos);
-+ if (ret) {
-+ MSM_BUS_ERR("%s: Error during qos init", __func__);
-+ goto exit_device_probe;
-+ }
-+
-+ bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_node_debug);
-+
-+ /* Register the arb layer ops */
-+ msm_bus_arb_setops_adhoc(&arb_ops);
-+ devm_kfree(&pdev->dev, pdata->info);
-+ devm_kfree(&pdev->dev, pdata);
-+exit_device_probe:
-+ return ret;
-+}
-+
-+static int msm_bus_device_rules_probe(struct platform_device *pdev)
-+{
-+ struct bus_rule_type *rule_data = NULL;
-+ int num_rules = 0;
-+
-+ num_rules = msm_bus_of_get_static_rules(pdev, &rule_data);
-+
-+ if (!rule_data)
-+ goto exit_rules_probe;
-+
-+ msm_rule_register(num_rules, rule_data, NULL);
-+ static_rules.num_rules = num_rules;
-+ static_rules.rules = rule_data;
-+ pdev->dev.platform_data = &static_rules;
-+
-+exit_rules_probe:
-+ return 0;
-+}
-+
-+int msm_bus_device_rules_remove(struct platform_device *pdev)
-+{
-+ struct static_rules_type *static_rules = NULL;
-+
-+ static_rules = pdev->dev.platform_data;
-+ if (static_rules)
-+ msm_rule_unregister(static_rules->num_rules,
-+ static_rules->rules, NULL);
-+ return 0;
-+}
-+
-+static int msm_bus_free_dev(struct device *dev, void *data)
-+{
-+ struct msm_bus_node_device_type *bus_node = NULL;
-+
-+ bus_node = dev->platform_data;
-+
-+ if (bus_node)
-+ MSM_BUS_ERR("\n%s: Removing device %d", __func__,
-+ bus_node->node_info->id);
-+ device_unregister(dev);
-+ return 0;
-+}
-+
-+int msm_bus_device_remove(struct platform_device *pdev)
-+{
-+ bus_for_each_dev(&msm_bus_type, NULL, NULL, msm_bus_free_dev);
-+ return 0;
-+}
-+
-+static struct of_device_id rules_match[] = {
-+ {.compatible = "qcom,msm-bus-static-bw-rules"},
-+ {}
-+};
-+
-+static struct platform_driver msm_bus_rules_driver = {
-+ .probe = msm_bus_device_rules_probe,
-+ .remove = msm_bus_device_rules_remove,
-+ .driver = {
-+ .name = "msm_bus_rules_device",
-+ .owner = THIS_MODULE,
-+ .of_match_table = rules_match,
-+ },
-+};
-+
-+static struct of_device_id fabric_match[] = {
-+ {.compatible = "qcom,msm-bus-device"},
-+ {}
-+};
-+
-+static struct platform_driver msm_bus_device_driver = {
-+ .probe = msm_bus_device_probe,
-+ .remove = msm_bus_device_remove,
-+ .driver = {
-+ .name = "msm_bus_device",
-+ .owner = THIS_MODULE,
-+ .of_match_table = fabric_match,
-+ },
-+};
-+
-+int __init msm_bus_device_init_driver(void)
-+{
-+ int rc;
-+
-+ MSM_BUS_ERR("msm_bus_fabric_init_driver\n");
-+ rc = platform_driver_register(&msm_bus_device_driver);
-+
-+ if (rc) {
-+ MSM_BUS_ERR("Failed to register bus device driver");
-+ return rc;
-+ }
-+ return platform_driver_register(&msm_bus_rules_driver);
-+}
-+subsys_initcall(msm_bus_device_init_driver);
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_id.c
-@@ -0,0 +1,94 @@
-+/* Copyright (c) 2013-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/module.h>
-+#include "msm-bus.h"
-+#include "msm-bus-board.h"
-+#include "msm_bus_core.h"
-+#include "msm_bus_noc.h"
-+#include "msm_bus_bimc.h"
-+
-+static uint32_t master_iids[MSM_BUS_MASTER_LAST];
-+static uint32_t slave_iids[MSM_BUS_SLAVE_LAST - SLAVE_ID_KEY];
-+
-+static void msm_bus_assign_iids(struct msm_bus_fabric_registration
-+ *fabreg, int fabid)
-+{
-+ int i;
-+ for (i = 0; i < fabreg->len; i++) {
-+ if (!fabreg->info[i].gateway) {
-+ fabreg->info[i].priv_id = fabid + fabreg->info[i].id;
-+ if (fabreg->info[i].id < SLAVE_ID_KEY) {
-+ if (fabreg->info[i].id >= MSM_BUS_MASTER_LAST) {
-+ WARN(1, "id %d exceeds array size!\n",
-+ fabreg->info[i].id);
-+ continue;
-+ }
-+
-+ master_iids[fabreg->info[i].id] =
-+ fabreg->info[i].priv_id;
-+ } else {
-+ if ((fabreg->info[i].id - SLAVE_ID_KEY) >=
-+ (MSM_BUS_SLAVE_LAST - SLAVE_ID_KEY)) {
-+ WARN(1, "id %d exceeds array size!\n",
-+ fabreg->info[i].id);
-+ continue;
-+ }
-+
-+ slave_iids[fabreg->info[i].id - (SLAVE_ID_KEY)]
-+ = fabreg->info[i].priv_id;
-+ }
-+ } else {
-+ fabreg->info[i].priv_id = fabreg->info[i].id;
-+ }
-+ }
-+}
-+
-+static int msm_bus_get_iid(int id)
-+{
-+ if ((id < SLAVE_ID_KEY && id >= MSM_BUS_MASTER_LAST) ||
-+ id >= MSM_BUS_SLAVE_LAST) {
-+ MSM_BUS_ERR("Cannot get iid. Invalid id %d passed\n", id);
-+ return -EINVAL;
-+ }
-+
-+ return CHECK_ID(((id < SLAVE_ID_KEY) ? master_iids[id] :
-+ slave_iids[id - SLAVE_ID_KEY]), id);
-+}
-+
-+static struct msm_bus_board_algorithm msm_bus_id_algo = {
-+ .get_iid = msm_bus_get_iid,
-+ .assign_iids = msm_bus_assign_iids,
-+};
-+
-+int msm_bus_board_rpm_get_il_ids(uint16_t *id)
-+{
-+ return -ENXIO;
-+}
-+
-+void msm_bus_board_init(struct msm_bus_fabric_registration *pdata)
-+{
-+ pdata->board_algo = &msm_bus_id_algo;
-+}
-+
-+void msm_bus_board_set_nfab(struct msm_bus_fabric_registration *pdata,
-+ int nfab)
-+{
-+ if (nfab <= 0)
-+ return;
-+
-+ msm_bus_id_algo.board_nfab = nfab;
-+}
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_noc.c
-@@ -0,0 +1,770 @@
-+/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#define pr_fmt(fmt) "AXI: NOC: %s(): " fmt, __func__
-+
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+#include "msm-bus-board.h"
-+#include "msm_bus_core.h"
-+#include "msm_bus_noc.h"
-+#include "msm_bus_adhoc.h"
-+
-+/* NOC_QOS generic */
-+#define __CLZ(x) ((8 * sizeof(uint32_t)) - 1 - __fls(x))
-+#define SAT_SCALE 16 /* 16 bytes minimum for saturation */
-+#define BW_SCALE 256 /* 1/256 byte per cycle unit */
-+#define QOS_DEFAULT_BASEOFFSET 0x00003000
-+#define QOS_DEFAULT_DELTA 0x80
-+#define MAX_BW_FIELD (NOC_QOS_BWn_BW_BMSK >> NOC_QOS_BWn_BW_SHFT)
-+#define MAX_SAT_FIELD (NOC_QOS_SATn_SAT_BMSK >> NOC_QOS_SATn_SAT_SHFT)
-+
-+#define NOC_QOS_REG_BASE(b, o) ((b) + (o))
-+
-+#define NOC_QOS_ID_COREIDn_ADDR(b, o, n, d) \
-+ (NOC_QOS_REG_BASE(b, o) + (d) * (n))
-+enum noc_qos_id_coreidn {
-+ NOC_QOS_ID_COREIDn_RMSK = 0xffffffff,
-+ NOC_QOS_ID_COREIDn_MAXn = 32,
-+ NOC_QOS_ID_COREIDn_CORECHSUM_BMSK = 0xffffff00,
-+ NOC_QOS_ID_COREIDn_CORECHSUM_SHFT = 0x8,
-+ NOC_QOS_ID_COREIDn_CORETYPEID_BMSK = 0xff,
-+ NOC_QOS_ID_COREIDn_CORETYPEID_SHFT = 0x0,
-+};
-+
-+#define NOC_QOS_ID_REVISIONIDn_ADDR(b, o, n, d) \
-+ (NOC_QOS_REG_BASE(b, o) + 0x4 + (d) * (n))
-+enum noc_qos_id_revisionidn {
-+ NOC_QOS_ID_REVISIONIDn_RMSK = 0xffffffff,
-+ NOC_QOS_ID_REVISIONIDn_MAXn = 32,
-+ NOC_QOS_ID_REVISIONIDn_FLEXNOCID_BMSK = 0xffffff00,
-+ NOC_QOS_ID_REVISIONIDn_FLEXNOCID_SHFT = 0x8,
-+ NOC_QOS_ID_REVISIONIDn_USERID_BMSK = 0xff,
-+ NOC_QOS_ID_REVISIONIDn_USERID_SHFT = 0x0,
-+};
-+
-+#define NOC_QOS_PRIORITYn_ADDR(b, o, n, d) \
-+ (NOC_QOS_REG_BASE(b, o) + 0x8 + (d) * (n))
-+enum noc_qos_id_priorityn {
-+ NOC_QOS_PRIORITYn_RMSK = 0x0000000f,
-+ NOC_QOS_PRIORITYn_MAXn = 32,
-+ NOC_QOS_PRIORITYn_P1_BMSK = 0xc,
-+ NOC_QOS_PRIORITYn_P1_SHFT = 0x2,
-+ NOC_QOS_PRIORITYn_P0_BMSK = 0x3,
-+ NOC_QOS_PRIORITYn_P0_SHFT = 0x0,
-+};
-+
-+#define NOC_QOS_MODEn_ADDR(b, o, n, d) \
-+ (NOC_QOS_REG_BASE(b, o) + 0xC + (d) * (n))
-+enum noc_qos_id_moden_rmsk {
-+ NOC_QOS_MODEn_RMSK = 0x00000003,
-+ NOC_QOS_MODEn_MAXn = 32,
-+ NOC_QOS_MODEn_MODE_BMSK = 0x3,
-+ NOC_QOS_MODEn_MODE_SHFT = 0x0,
-+};
-+
-+#define NOC_QOS_BWn_ADDR(b, o, n, d) \
-+ (NOC_QOS_REG_BASE(b, o) + 0x10 + (d) * (n))
-+enum noc_qos_id_bwn {
-+ NOC_QOS_BWn_RMSK = 0x0000ffff,
-+ NOC_QOS_BWn_MAXn = 32,
-+ NOC_QOS_BWn_BW_BMSK = 0xffff,
-+ NOC_QOS_BWn_BW_SHFT = 0x0,
-+};
-+
-+/* QOS Saturation registers */
-+#define NOC_QOS_SATn_ADDR(b, o, n, d) \
-+ (NOC_QOS_REG_BASE(b, o) + 0x14 + (d) * (n))
-+enum noc_qos_id_saturationn {
-+ NOC_QOS_SATn_RMSK = 0x000003ff,
-+ NOC_QOS_SATn_MAXn = 32,
-+ NOC_QOS_SATn_SAT_BMSK = 0x3ff,
-+ NOC_QOS_SATn_SAT_SHFT = 0x0,
-+};
-+
-+static int noc_div(uint64_t *a, uint32_t b)
-+{
-+ if ((*a > 0) && (*a < b))
-+ return 1;
-+ else
-+ return do_div(*a, b);
-+}
-+
-+/**
-+ * Calculates bw hardware is using from register values
-+ * bw returned is in bytes/sec
-+ */
-+static uint64_t noc_bw(uint32_t bw_field, uint32_t qos_freq)
-+{
-+ uint64_t res;
-+ uint32_t rem, scale;
-+
-+ res = 2 * qos_freq * bw_field;
-+ scale = BW_SCALE * 1000;
-+ rem = noc_div(&res, scale);
-+ MSM_BUS_DBG("NOC: Calculated bw: %llu\n", res * 1000000ULL);
-+ return res * 1000000ULL;
-+}
-+
-+static uint32_t noc_bw_ceil(long int bw_field, uint32_t qos_freq)
-+{
-+ uint64_t bw_temp = 2 * qos_freq * bw_field;
-+ uint32_t scale = 1000 * BW_SCALE;
-+ noc_div(&bw_temp, scale);
-+ return bw_temp * 1000000;
-+}
-+#define MAX_BW(timebase) noc_bw_ceil(MAX_BW_FIELD, (timebase))
-+
-+/**
-+ * Calculates ws hardware is using from register values
-+ * ws returned is in nanoseconds
-+ */
-+static uint32_t noc_ws(uint64_t bw, uint32_t sat, uint32_t qos_freq)
-+{
-+ if (bw && qos_freq) {
-+ uint32_t bwf = bw * qos_freq;
-+ uint64_t scale = 1000000000000LL * BW_SCALE *
-+ SAT_SCALE * sat;
-+ noc_div(&scale, bwf);
-+ MSM_BUS_DBG("NOC: Calculated ws: %llu\n", scale);
-+ return scale;
-+ }
-+
-+ return 0;
-+}
-+#define MAX_WS(bw, timebase) noc_ws((bw), MAX_SAT_FIELD, (timebase))
-+
-+/* Calculate bandwidth field value for requested bandwidth */
-+static uint32_t noc_bw_field(uint64_t bw, uint32_t qos_freq)
-+{
-+ uint32_t bw_field = 0;
-+
-+ if (bw) {
-+ uint32_t rem;
-+ uint64_t bw_capped = min_t(uint64_t, bw, MAX_BW(qos_freq));
-+ uint64_t bwc = bw_capped * BW_SCALE;
-+ uint64_t qf = 2 * qos_freq * 1000;
-+
-+ rem = noc_div(&bwc, qf);
-+ bw_field = (uint32_t)min_t(uint64_t, bwc, MAX_BW_FIELD);
-+ }
-+
-+ MSM_BUS_DBG("NOC: bw_field: %u\n", bw_field);
-+ return bw_field;
-+}
-+
-+static uint32_t noc_sat_field(uint64_t bw, uint32_t ws, uint32_t qos_freq)
-+{
-+ uint32_t sat_field = 0, win;
-+
-+ if (bw) {
-+ /* Limit to max bw and scale bw to 100 KB increments */
-+ uint64_t tbw, tscale;
-+ uint64_t bw_scaled = min_t(uint64_t, bw, MAX_BW(qos_freq));
-+ uint32_t rem = noc_div(&bw_scaled, 100000);
-+
-+ /**
-+ * Calculate saturation from windows size.
-+ * WS must be at least one arb period.
-+ * Saturation must not exceed max field size
-+ *
-+ * Bandwidth is in 100KB increments
-+ * Window size is in ns
-+ * qos_freq is in KHz
-+ */
-+ win = max(ws, 1000000 / qos_freq);
-+ tbw = bw_scaled * win * qos_freq;
-+ tscale = 10000000ULL * BW_SCALE * SAT_SCALE;
-+ rem = noc_div(&tbw, tscale);
-+ sat_field = (uint32_t)min_t(uint64_t, tbw, MAX_SAT_FIELD);
-+ }
-+
-+ MSM_BUS_DBG("NOC: sat_field: %d\n", sat_field);
-+ return sat_field;
-+}
-+
-+static void noc_set_qos_mode(void __iomem *base, uint32_t qos_off,
-+ uint32_t mport, uint32_t qos_delta, uint8_t mode,
-+ uint8_t perm_mode)
-+{
-+ if (mode < NOC_QOS_MODE_MAX &&
-+ ((1 << mode) & perm_mode)) {
-+ uint32_t reg_val;
-+
-+ reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off,
-+ mport, qos_delta)) & NOC_QOS_MODEn_RMSK;
-+ writel_relaxed(((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK))) |
-+ (mode & NOC_QOS_MODEn_MODE_BMSK)),
-+ NOC_QOS_MODEn_ADDR(base, qos_off, mport, qos_delta));
-+ }
-+ /* Ensure qos mode is set before exiting */
-+ wmb();
-+}
-+
-+static void noc_set_qos_priority(void __iomem *base, uint32_t qos_off,
-+ uint32_t mport, uint32_t qos_delta,
-+ struct msm_bus_noc_qos_priority *priority)
-+{
-+ uint32_t reg_val, val;
-+
-+ reg_val = readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport,
-+ qos_delta)) & NOC_QOS_PRIORITYn_RMSK;
-+ val = priority->p1 << NOC_QOS_PRIORITYn_P1_SHFT;
-+ writel_relaxed(((reg_val & (~(NOC_QOS_PRIORITYn_P1_BMSK))) |
-+ (val & NOC_QOS_PRIORITYn_P1_BMSK)),
-+ NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, qos_delta));
-+
-+ reg_val = readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport,
-+ qos_delta))
-+ & NOC_QOS_PRIORITYn_RMSK;
-+ writel_relaxed(((reg_val & (~(NOC_QOS_PRIORITYn_P0_BMSK))) |
-+ (priority->p0 & NOC_QOS_PRIORITYn_P0_BMSK)),
-+ NOC_QOS_PRIORITYn_ADDR(base, qos_off, mport, qos_delta));
-+ /* Ensure qos priority is set before exiting */
-+ wmb();
-+}
-+
-+static void msm_bus_noc_set_qos_bw(void __iomem *base, uint32_t qos_off,
-+ uint32_t qos_freq, uint32_t mport, uint32_t qos_delta,
-+ uint8_t perm_mode, struct msm_bus_noc_qos_bw *qbw)
-+{
-+ uint32_t reg_val, val, mode;
-+
-+ if (!qos_freq) {
-+ MSM_BUS_DBG("Zero QoS Freq\n");
-+ return;
-+ }
-+
-+
-+ /* If Limiter or Regulator modes are not supported, bw not available*/
-+ if (perm_mode & (NOC_QOS_PERM_MODE_LIMITER |
-+ NOC_QOS_PERM_MODE_REGULATOR)) {
-+ uint32_t bw_val = noc_bw_field(qbw->bw, qos_freq);
-+ uint32_t sat_val = noc_sat_field(qbw->bw, qbw->ws,
-+ qos_freq);
-+
-+ MSM_BUS_DBG("NOC: BW: perm_mode: %d bw_val: %d, sat_val: %d\n",
-+ perm_mode, bw_val, sat_val);
-+ /*
-+ * If in Limiter/Regulator mode, first go to fixed mode.
-+ * Clear QoS accumulator
-+ **/
-+ mode = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off,
-+ mport, qos_delta)) & NOC_QOS_MODEn_MODE_BMSK;
-+ if (mode == NOC_QOS_MODE_REGULATOR || mode ==
-+ NOC_QOS_MODE_LIMITER) {
-+ reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(
-+ base, qos_off, mport, qos_delta));
-+ val = NOC_QOS_MODE_FIXED;
-+ writel_relaxed((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK)))
-+ | (val & NOC_QOS_MODEn_MODE_BMSK),
-+ NOC_QOS_MODEn_ADDR(base, qos_off, mport,
-+ qos_delta));
-+ }
-+
-+ reg_val = readl_relaxed(NOC_QOS_BWn_ADDR(base, qos_off, mport,
-+ qos_delta));
-+ val = bw_val << NOC_QOS_BWn_BW_SHFT;
-+ writel_relaxed(((reg_val & (~(NOC_QOS_BWn_BW_BMSK))) |
-+ (val & NOC_QOS_BWn_BW_BMSK)),
-+ NOC_QOS_BWn_ADDR(base, qos_off, mport, qos_delta));
-+
-+ MSM_BUS_DBG("NOC: BW: Wrote value: 0x%x\n", ((reg_val &
-+ (~NOC_QOS_BWn_BW_BMSK)) | (val &
-+ NOC_QOS_BWn_BW_BMSK)));
-+
-+ reg_val = readl_relaxed(NOC_QOS_SATn_ADDR(base, qos_off,
-+ mport, qos_delta));
-+ val = sat_val << NOC_QOS_SATn_SAT_SHFT;
-+ writel_relaxed(((reg_val & (~(NOC_QOS_SATn_SAT_BMSK))) |
-+ (val & NOC_QOS_SATn_SAT_BMSK)),
-+ NOC_QOS_SATn_ADDR(base, qos_off, mport, qos_delta));
-+
-+ MSM_BUS_DBG("NOC: SAT: Wrote value: 0x%x\n", ((reg_val &
-+ (~NOC_QOS_SATn_SAT_BMSK)) | (val &
-+ NOC_QOS_SATn_SAT_BMSK)));
-+
-+ /* Set mode back to what it was initially */
-+ reg_val = readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off,
-+ mport, qos_delta));
-+ writel_relaxed((reg_val & (~(NOC_QOS_MODEn_MODE_BMSK)))
-+ | (mode & NOC_QOS_MODEn_MODE_BMSK),
-+ NOC_QOS_MODEn_ADDR(base, qos_off, mport, qos_delta));
-+ /* Ensure that all writes for bandwidth registers have
-+ * completed before returning
-+ */
-+ wmb();
-+ }
-+}
-+
-+uint8_t msm_bus_noc_get_qos_mode(void __iomem *base, uint32_t qos_off,
-+ uint32_t mport, uint32_t qos_delta, uint32_t mode, uint32_t perm_mode)
-+{
-+ if (NOC_QOS_MODES_ALL_PERM == perm_mode)
-+ return readl_relaxed(NOC_QOS_MODEn_ADDR(base, qos_off,
-+ mport, qos_delta)) & NOC_QOS_MODEn_MODE_BMSK;
-+ else
-+ return 31 - __CLZ(mode &
-+ NOC_QOS_MODES_ALL_PERM);
-+}
-+
-+void msm_bus_noc_get_qos_priority(void __iomem *base, uint32_t qos_off,
-+ uint32_t mport, uint32_t qos_delta,
-+ struct msm_bus_noc_qos_priority *priority)
-+{
-+ priority->p1 = (readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off,
-+ mport, qos_delta)) & NOC_QOS_PRIORITYn_P1_BMSK) >>
-+ NOC_QOS_PRIORITYn_P1_SHFT;
-+
-+ priority->p0 = (readl_relaxed(NOC_QOS_PRIORITYn_ADDR(base, qos_off,
-+ mport, qos_delta)) & NOC_QOS_PRIORITYn_P0_BMSK) >>
-+ NOC_QOS_PRIORITYn_P0_SHFT;
-+}
-+
-+void msm_bus_noc_get_qos_bw(void __iomem *base, uint32_t qos_off,
-+ uint32_t qos_freq,
-+ uint32_t mport, uint32_t qos_delta, uint8_t perm_mode,
-+ struct msm_bus_noc_qos_bw *qbw)
-+{
-+ if (perm_mode & (NOC_QOS_PERM_MODE_LIMITER |
-+ NOC_QOS_PERM_MODE_REGULATOR)) {
-+ uint32_t bw_val = readl_relaxed(NOC_QOS_BWn_ADDR(
-+ base, qos_off, mport, qos_delta)) & NOC_QOS_BWn_BW_BMSK;
-+ uint32_t sat = readl_relaxed(NOC_QOS_SATn_ADDR(
-+ base, qos_off, mport, qos_delta))
-+ & NOC_QOS_SATn_SAT_BMSK;
-+
-+ qbw->bw = noc_bw(bw_val, qos_freq);
-+ qbw->ws = noc_ws(qbw->bw, sat, qos_freq);
-+ } else {
-+ qbw->bw = 0;
-+ qbw->ws = 0;
-+ }
-+}
-+
-+static int msm_bus_noc_mas_init(struct msm_bus_noc_info *ninfo,
-+ struct msm_bus_inode_info *info)
-+{
-+ int i;
-+ struct msm_bus_noc_qos_priority *prio;
-+ prio = kzalloc(sizeof(struct msm_bus_noc_qos_priority),
-+ GFP_KERNEL);
-+ if (!prio) {
-+ MSM_BUS_WARN("Couldn't alloc prio data for node: %d\n",
-+ info->node_info->id);
-+ return -ENOMEM;
-+ }
-+
-+ prio->read_prio = info->node_info->prio_rd;
-+ prio->write_prio = info->node_info->prio_wr;
-+ prio->p1 = info->node_info->prio1;
-+ prio->p0 = info->node_info->prio0;
-+ info->hw_data = (void *)prio;
-+
-+ if (!info->node_info->qport) {
-+ MSM_BUS_DBG("No QoS Ports to init\n");
-+ return 0;
-+ }
-+
-+ for (i = 0; i < info->node_info->num_mports; i++) {
-+ if (info->node_info->mode != NOC_QOS_MODE_BYPASS) {
-+ noc_set_qos_priority(ninfo->base, ninfo->qos_baseoffset,
-+ info->node_info->qport[i], ninfo->qos_delta,
-+ prio);
-+
-+ if (info->node_info->mode != NOC_QOS_MODE_FIXED) {
-+ struct msm_bus_noc_qos_bw qbw;
-+ qbw.ws = info->node_info->ws;
-+ qbw.bw = 0;
-+ msm_bus_noc_set_qos_bw(ninfo->base,
-+ ninfo->qos_baseoffset,
-+ ninfo->qos_freq, info->node_info->
-+ qport[i], ninfo->qos_delta,
-+ info->node_info->perm_mode,
-+ &qbw);
-+ }
-+ }
-+
-+ noc_set_qos_mode(ninfo->base, ninfo->qos_baseoffset,
-+ info->node_info->qport[i], ninfo->qos_delta,
-+ info->node_info->mode,
-+ info->node_info->perm_mode);
-+ }
-+
-+ return 0;
-+}
-+
-+static void msm_bus_noc_node_init(void *hw_data,
-+ struct msm_bus_inode_info *info)
-+{
-+ struct msm_bus_noc_info *ninfo =
-+ (struct msm_bus_noc_info *)hw_data;
-+
-+ if (!IS_SLAVE(info->node_info->priv_id))
-+ if (info->node_info->hw_sel != MSM_BUS_RPM)
-+ msm_bus_noc_mas_init(ninfo, info);
-+}
-+
-+static int msm_bus_noc_allocate_commit_data(struct msm_bus_fabric_registration
-+ *fab_pdata, void **cdata, int ctx)
-+{
-+ struct msm_bus_noc_commit **cd = (struct msm_bus_noc_commit **)cdata;
-+ struct msm_bus_noc_info *ninfo =
-+ (struct msm_bus_noc_info *)fab_pdata->hw_data;
-+
-+ *cd = kzalloc(sizeof(struct msm_bus_noc_commit), GFP_KERNEL);
-+ if (!*cd) {
-+ MSM_BUS_DBG("Couldn't alloc mem for cdata\n");
-+ return -ENOMEM;
-+ }
-+
-+ (*cd)->mas = ninfo->cdata[ctx].mas;
-+ (*cd)->slv = ninfo->cdata[ctx].slv;
-+
-+ return 0;
-+}
-+
-+static void *msm_bus_noc_allocate_noc_data(struct platform_device *pdev,
-+ struct msm_bus_fabric_registration *fab_pdata)
-+{
-+ struct resource *noc_mem;
-+ struct resource *noc_io;
-+ struct msm_bus_noc_info *ninfo;
-+ int i;
-+
-+ ninfo = kzalloc(sizeof(struct msm_bus_noc_info), GFP_KERNEL);
-+ if (!ninfo) {
-+ MSM_BUS_DBG("Couldn't alloc mem for noc info\n");
-+ return NULL;
-+ }
-+
-+ ninfo->nmasters = fab_pdata->nmasters;
-+ ninfo->nqos_masters = fab_pdata->nmasters;
-+ ninfo->nslaves = fab_pdata->nslaves;
-+ ninfo->qos_freq = fab_pdata->qos_freq;
-+
-+ if (!fab_pdata->qos_baseoffset)
-+ ninfo->qos_baseoffset = QOS_DEFAULT_BASEOFFSET;
-+ else
-+ ninfo->qos_baseoffset = fab_pdata->qos_baseoffset;
-+
-+ if (!fab_pdata->qos_delta)
-+ ninfo->qos_delta = QOS_DEFAULT_DELTA;
-+ else
-+ ninfo->qos_delta = fab_pdata->qos_delta;
-+
-+ ninfo->mas_modes = kzalloc(sizeof(uint32_t) * fab_pdata->nmasters,
-+ GFP_KERNEL);
-+ if (!ninfo->mas_modes) {
-+ MSM_BUS_DBG("Couldn't alloc mem for noc master-modes\n");
-+ kfree(ninfo);
-+ return NULL;
-+ }
-+
-+ for (i = 0; i < NUM_CTX; i++) {
-+ ninfo->cdata[i].mas = kzalloc(sizeof(struct
-+ msm_bus_node_hw_info) * fab_pdata->nmasters * 2,
-+ GFP_KERNEL);
-+ if (!ninfo->cdata[i].mas) {
-+ MSM_BUS_DBG("Couldn't alloc mem for noc master-bw\n");
-+ kfree(ninfo->mas_modes);
-+ kfree(ninfo);
-+ return NULL;
-+ }
-+
-+ ninfo->cdata[i].slv = kzalloc(sizeof(struct
-+ msm_bus_node_hw_info) * fab_pdata->nslaves * 2,
-+ GFP_KERNEL);
-+ if (!ninfo->cdata[i].slv) {
-+ MSM_BUS_DBG("Couldn't alloc mem for noc master-bw\n");
-+ kfree(ninfo->cdata[i].mas);
-+ goto err;
-+ }
-+ }
-+
-+ /* If it's a virtual fabric, don't get memory info */
-+ if (fab_pdata->virt)
-+ goto skip_mem;
-+
-+ noc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!noc_mem && !fab_pdata->virt) {
-+ MSM_BUS_ERR("Cannot get NoC Base address\n");
-+ goto err;
-+ }
-+
-+ noc_io = request_mem_region(noc_mem->start,
-+ resource_size(noc_mem), pdev->name);
-+ if (!noc_io) {
-+ MSM_BUS_ERR("NoC memory unavailable\n");
-+ goto err;
-+ }
-+
-+ ninfo->base = ioremap(noc_mem->start, resource_size(noc_mem));
-+ if (!ninfo->base) {
-+ MSM_BUS_ERR("IOremap failed for NoC!\n");
-+ release_mem_region(noc_mem->start, resource_size(noc_mem));
-+ goto err;
-+ }
-+
-+skip_mem:
-+ fab_pdata->hw_data = (void *)ninfo;
-+ return (void *)ninfo;
-+
-+err:
-+ kfree(ninfo->mas_modes);
-+ kfree(ninfo);
-+ return NULL;
-+}
-+
-+static void free_commit_data(void *cdata)
-+{
-+ struct msm_bus_noc_commit *cd = (struct msm_bus_noc_commit *)cdata;
-+
-+ kfree(cd->mas);
-+ kfree(cd->slv);
-+ kfree(cd);
-+}
-+
-+static bool msm_bus_noc_update_bw_reg(int mode)
-+{
-+ bool ret = false;
-+
-+ if ((mode == NOC_QOS_MODE_LIMITER) ||
-+ (mode == NOC_QOS_MODE_REGULATOR))
-+ ret = true;
-+
-+ return ret;
-+}
-+
-+static void msm_bus_noc_update_bw(struct msm_bus_inode_info *hop,
-+ struct msm_bus_inode_info *info,
-+ struct msm_bus_fabric_registration *fab_pdata,
-+ void *sel_cdata, int *master_tiers,
-+ int64_t add_bw)
-+{
-+ struct msm_bus_noc_info *ninfo;
-+ struct msm_bus_noc_qos_bw qos_bw;
-+ int i, ports;
-+ int64_t bw;
-+ struct msm_bus_noc_commit *sel_cd =
-+ (struct msm_bus_noc_commit *)sel_cdata;
-+
-+ ninfo = (struct msm_bus_noc_info *)fab_pdata->hw_data;
-+ if (!ninfo->qos_freq) {
-+ MSM_BUS_DBG("NOC: No qos frequency to update bw\n");
-+ return;
-+ }
-+
-+ if (info->node_info->num_mports == 0) {
-+ MSM_BUS_DBG("NOC: Skip Master BW\n");
-+ goto skip_mas_bw;
-+ }
-+
-+ ports = info->node_info->num_mports;
-+ bw = INTERLEAVED_BW(fab_pdata, add_bw, ports);
-+
-+ MSM_BUS_DBG("NOC: Update bw for: %d: %lld\n",
-+ info->node_info->priv_id, add_bw);
-+ for (i = 0; i < ports; i++) {
-+ sel_cd->mas[info->node_info->masterp[i]].bw += bw;
-+ sel_cd->mas[info->node_info->masterp[i]].hw_id =
-+ info->node_info->mas_hw_id;
-+ MSM_BUS_DBG("NOC: Update mas_bw: ID: %d, BW: %llu ports:%d\n",
-+ info->node_info->priv_id,
-+ sel_cd->mas[info->node_info->masterp[i]].bw,
-+ ports);
-+ /* Check if info is a shared master.
-+ * If it is, mark it dirty
-+ * If it isn't, then set QOS Bandwidth
-+ **/
-+ if (info->node_info->hw_sel == MSM_BUS_RPM)
-+ sel_cd->mas[info->node_info->masterp[i]].dirty = 1;
-+ else {
-+ if (!info->node_info->qport) {
-+ MSM_BUS_DBG("No qos ports to update!\n");
-+ break;
-+ }
-+
-+ if (!(info->node_info->mode == NOC_QOS_MODE_REGULATOR)
-+ || (info->node_info->mode ==
-+ NOC_QOS_MODE_LIMITER)) {
-+ MSM_BUS_DBG("Skip QoS reg programming\n");
-+ break;
-+ }
-+ qos_bw.bw = sel_cd->mas[info->node_info->masterp[i]].
-+ bw;
-+ qos_bw.ws = info->node_info->ws;
-+ msm_bus_noc_set_qos_bw(ninfo->base,
-+ ninfo->qos_baseoffset,
-+ ninfo->qos_freq,
-+ info->node_info->qport[i], ninfo->qos_delta,
-+ info->node_info->perm_mode, &qos_bw);
-+ MSM_BUS_DBG("NOC: QoS: Update mas_bw: ws: %u\n",
-+ qos_bw.ws);
-+ }
-+ }
-+
-+skip_mas_bw:
-+ ports = hop->node_info->num_sports;
-+ for (i = 0; i < ports; i++) {
-+ sel_cd->slv[hop->node_info->slavep[i]].bw += add_bw;
-+ sel_cd->slv[hop->node_info->slavep[i]].hw_id =
-+ hop->node_info->slv_hw_id;
-+ MSM_BUS_DBG("NOC: Update slave_bw for ID: %d -> %llu\n",
-+ hop->node_info->priv_id,
-+ sel_cd->slv[hop->node_info->slavep[i]].bw);
-+ MSM_BUS_DBG("NOC: Update slave_bw for hw_id: %d, index: %d\n",
-+ hop->node_info->slv_hw_id, hop->node_info->slavep[i]);
-+ /* Check if hop is a shared slave.
-+ * If it is, mark it dirty
-+ * If it isn't, then nothing to be done as the
-+ * slaves are in bypass mode.
-+ **/
-+ if (hop->node_info->hw_sel == MSM_BUS_RPM)
-+ sel_cd->slv[hop->node_info->slavep[i]].dirty = 1;
-+ }
-+}
-+
-+static int msm_bus_noc_commit(struct msm_bus_fabric_registration
-+ *fab_pdata, void *hw_data, void **cdata)
-+{
-+ MSM_BUS_DBG("\nReached NOC Commit\n");
-+ msm_bus_remote_hw_commit(fab_pdata, hw_data, cdata);
-+ return 0;
-+}
-+
-+static int msm_bus_noc_port_halt(uint32_t haltid, uint8_t mport)
-+{
-+ return 0;
-+}
-+
-+static int msm_bus_noc_port_unhalt(uint32_t haltid, uint8_t mport)
-+{
-+ return 0;
-+}
-+
-+static int msm_bus_noc_qos_init(struct msm_bus_node_device_type *info,
-+ void __iomem *qos_base,
-+ uint32_t qos_off, uint32_t qos_delta,
-+ uint32_t qos_freq)
-+{
-+ struct msm_bus_noc_qos_priority prio;
-+ int ret = 0;
-+ int i;
-+
-+ prio.p1 = info->node_info->qos_params.prio1;
-+ prio.p0 = info->node_info->qos_params.prio0;
-+
-+ if (!info->node_info->qport) {
-+ MSM_BUS_DBG("No QoS Ports to init\n");
-+ ret = 0;
-+ goto err_qos_init;
-+ }
-+
-+ for (i = 0; i < info->node_info->num_qports; i++) {
-+ if (info->node_info->qos_params.mode != NOC_QOS_MODE_BYPASS) {
-+ noc_set_qos_priority(qos_base, qos_off,
-+ info->node_info->qport[i], qos_delta,
-+ &prio);
-+
-+ if (info->node_info->qos_params.mode !=
-+ NOC_QOS_MODE_FIXED) {
-+ struct msm_bus_noc_qos_bw qbw;
-+ qbw.ws = info->node_info->qos_params.ws;
-+ qbw.bw = 0;
-+ msm_bus_noc_set_qos_bw(qos_base, qos_off,
-+ qos_freq,
-+ info->node_info->qport[i],
-+ qos_delta,
-+ info->node_info->qos_params.mode,
-+ &qbw);
-+ }
-+ }
-+
-+ noc_set_qos_mode(qos_base, qos_off, info->node_info->qport[i],
-+ qos_delta, info->node_info->qos_params.mode,
-+ (1 << info->node_info->qos_params.mode));
-+ }
-+err_qos_init:
-+ return ret;
-+}
-+
-+static int msm_bus_noc_set_bw(struct msm_bus_node_device_type *dev,
-+ void __iomem *qos_base,
-+ uint32_t qos_off, uint32_t qos_delta,
-+ uint32_t qos_freq)
-+{
-+ int ret = 0;
-+ uint64_t bw = 0;
-+ int i;
-+ struct msm_bus_node_info_type *info = dev->node_info;
-+
-+ if (info && info->num_qports &&
-+ ((info->qos_params.mode == NOC_QOS_MODE_REGULATOR) ||
-+ (info->qos_params.mode ==
-+ NOC_QOS_MODE_LIMITER))) {
-+ struct msm_bus_noc_qos_bw qos_bw;
-+
-+ bw = msm_bus_div64(info->num_qports,
-+ dev->node_ab.ab[DUAL_CTX]);
-+
-+ for (i = 0; i < info->num_qports; i++) {
-+ if (!info->qport) {
-+ MSM_BUS_DBG("No qos ports to update!\n");
-+ break;
-+ }
-+
-+ qos_bw.bw = bw;
-+ qos_bw.ws = info->qos_params.ws;
-+ msm_bus_noc_set_qos_bw(qos_base, qos_off, qos_freq,
-+ info->qport[i], qos_delta,
-+ info->qos_params.mode, &qos_bw);
-+ MSM_BUS_DBG("NOC: QoS: Update mas_bw: ws: %u\n",
-+ qos_bw.ws);
-+ }
-+ }
-+ return ret;
-+}
-+int msm_bus_noc_hw_init(struct msm_bus_fabric_registration *pdata,
-+ struct msm_bus_hw_algorithm *hw_algo)
-+{
-+ /* Set interleaving to true by default */
-+ pdata->il_flag = true;
-+ hw_algo->allocate_commit_data = msm_bus_noc_allocate_commit_data;
-+ hw_algo->allocate_hw_data = msm_bus_noc_allocate_noc_data;
-+ hw_algo->node_init = msm_bus_noc_node_init;
-+ hw_algo->free_commit_data = free_commit_data;
-+ hw_algo->update_bw = msm_bus_noc_update_bw;
-+ hw_algo->commit = msm_bus_noc_commit;
-+ hw_algo->port_halt = msm_bus_noc_port_halt;
-+ hw_algo->port_unhalt = msm_bus_noc_port_unhalt;
-+ hw_algo->update_bw_reg = msm_bus_noc_update_bw_reg;
-+ hw_algo->config_master = NULL;
-+ hw_algo->config_limiter = NULL;
-+
-+ return 0;
-+}
-+
-+int msm_bus_noc_set_ops(struct msm_bus_node_device_type *bus_dev)
-+{
-+ if (!bus_dev)
-+ return -ENODEV;
-+ else {
-+ bus_dev->fabdev->noc_ops.qos_init = msm_bus_noc_qos_init;
-+ bus_dev->fabdev->noc_ops.set_bw = msm_bus_noc_set_bw;
-+ bus_dev->fabdev->noc_ops.limit_mport = NULL;
-+ bus_dev->fabdev->noc_ops.update_bw_reg =
-+ msm_bus_noc_update_bw_reg;
-+ }
-+ return 0;
-+}
-+EXPORT_SYMBOL(msm_bus_noc_set_ops);
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_noc.h
-@@ -0,0 +1,76 @@
-+/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef _ARCH_ARM_MACH_MSM_BUS_BIMC_H
-+#define _ARCH_ARM_MACH_MSM_BUS_BIMC_H
-+
-+enum msm_bus_noc_qos_mode_type {
-+ NOC_QOS_MODE_FIXED = 0,
-+ NOC_QOS_MODE_LIMITER,
-+ NOC_QOS_MODE_BYPASS,
-+ NOC_QOS_MODE_REGULATOR,
-+ NOC_QOS_MODE_MAX,
-+};
-+
-+enum msm_bus_noc_qos_mode_perm {
-+ NOC_QOS_PERM_MODE_FIXED = (1 << NOC_QOS_MODE_FIXED),
-+ NOC_QOS_PERM_MODE_LIMITER = (1 << NOC_QOS_MODE_LIMITER),
-+ NOC_QOS_PERM_MODE_BYPASS = (1 << NOC_QOS_MODE_BYPASS),
-+ NOC_QOS_PERM_MODE_REGULATOR = (1 << NOC_QOS_MODE_REGULATOR),
-+};
-+
-+#define NOC_QOS_MODES_ALL_PERM (NOC_QOS_PERM_MODE_FIXED | \
-+ NOC_QOS_PERM_MODE_LIMITER | NOC_QOS_PERM_MODE_BYPASS | \
-+ NOC_QOS_PERM_MODE_REGULATOR)
-+
-+struct msm_bus_noc_commit {
-+ struct msm_bus_node_hw_info *mas;
-+ struct msm_bus_node_hw_info *slv;
-+};
-+
-+struct msm_bus_noc_info {
-+ void __iomem *base;
-+ uint32_t base_addr;
-+ uint32_t nmasters;
-+ uint32_t nqos_masters;
-+ uint32_t nslaves;
-+ uint32_t qos_freq; /* QOS Clock in KHz */
-+ uint32_t qos_baseoffset;
-+ uint32_t qos_delta;
-+ uint32_t *mas_modes;
-+ struct msm_bus_noc_commit cdata[NUM_CTX];
-+};
-+
-+struct msm_bus_noc_qos_priority {
-+ uint32_t high_prio;
-+ uint32_t low_prio;
-+ uint32_t read_prio;
-+ uint32_t write_prio;
-+ uint32_t p1;
-+ uint32_t p0;
-+};
-+
-+struct msm_bus_noc_qos_bw {
-+ uint64_t bw; /* Bandwidth in bytes per second */
-+ uint32_t ws; /* Window size in nano seconds */
-+};
-+
-+void msm_bus_noc_init(struct msm_bus_noc_info *ninfo);
-+uint8_t msm_bus_noc_get_qos_mode(void __iomem *base, uint32_t qos_off,
-+ uint32_t mport, uint32_t qos_delta, uint32_t mode, uint32_t perm_mode);
-+void msm_bus_noc_get_qos_priority(void __iomem *base, uint32_t qos_off,
-+ uint32_t mport, uint32_t qos_delta,
-+ struct msm_bus_noc_qos_priority *qprio);
-+void msm_bus_noc_get_qos_bw(void __iomem *base, uint32_t qos_off,
-+ uint32_t qos_freq, uint32_t mport, uint32_t qos_delta,
-+ uint8_t perm_mode, struct msm_bus_noc_qos_bw *qbw);
-+#endif /*_ARCH_ARM_MACH_MSM_BUS_NOC_H */
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_of.c
-@@ -0,0 +1,705 @@
-+/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
-+
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include "msm-bus.h"
-+#include "msm-bus-board.h"
-+#include "msm_bus_core.h"
-+
-+static const char * const hw_sel_name[] = {"RPM", "NoC", "BIMC", NULL};
-+static const char * const mode_sel_name[] = {"Fixed", "Limiter", "Bypass",
-+ "Regulator", NULL};
-+
-+static int get_num(const char *const str[], const char *name)
-+{
-+ int i = 0;
-+
-+ do {
-+ if (!strcmp(name, str[i]))
-+ return i;
-+
-+ i++;
-+ } while (str[i] != NULL);
-+
-+ pr_err("Error: string %s not found\n", name);
-+ return -EINVAL;
-+}
-+
-+#if defined(CONFIG_DEBUG_FS) && defined(CONFIG_MSM_BUS_SCALING)
-+static struct msm_bus_scale_pdata *get_pdata(struct platform_device *pdev,
-+ struct device_node *of_node)
-+{
-+ struct msm_bus_scale_pdata *pdata = NULL;
-+ struct msm_bus_paths *usecase = NULL;
-+ int i = 0, j, ret, num_usecases = 0, num_paths, len;
-+ const uint32_t *vec_arr = NULL;
-+ bool mem_err = false;
-+
-+ if (!pdev) {
-+ pr_err("Error: Null Platform device\n");
-+ return NULL;
-+ }
-+
-+ pdata = devm_kzalloc(&pdev->dev, sizeof(struct msm_bus_scale_pdata),
-+ GFP_KERNEL);
-+ if (!pdata) {
-+ pr_err("Error: Memory allocation for pdata failed\n");
-+ mem_err = true;
-+ goto err;
-+ }
-+
-+ ret = of_property_read_string(of_node, "qcom,msm-bus,name",
-+ &pdata->name);
-+ if (ret) {
-+ pr_err("Error: Client name not found\n");
-+ goto err;
-+ }
-+
-+ ret = of_property_read_u32(of_node, "qcom,msm-bus,num-cases",
-+ &num_usecases);
-+ if (ret) {
-+ pr_err("Error: num-usecases not found\n");
-+ goto err;
-+ }
-+
-+ pdata->num_usecases = num_usecases;
-+
-+ if (of_property_read_bool(of_node, "qcom,msm-bus,active-only"))
-+ pdata->active_only = 1;
-+ else {
-+ pr_debug("active_only flag absent.\n");
-+ pr_debug("Using dual context by default\n");
-+ }
-+
-+ usecase = devm_kzalloc(&pdev->dev, (sizeof(struct msm_bus_paths) *
-+ pdata->num_usecases), GFP_KERNEL);
-+ if (!usecase) {
-+ pr_err("Error: Memory allocation for paths failed\n");
-+ mem_err = true;
-+ goto err;
-+ }
-+
-+ ret = of_property_read_u32(of_node, "qcom,msm-bus,num-paths",
-+ &num_paths);
-+ if (ret) {
-+ pr_err("Error: num_paths not found\n");
-+ goto err;
-+ }
-+
-+ vec_arr = of_get_property(of_node, "qcom,msm-bus,vectors-KBps", &len);
-+ if (vec_arr == NULL) {
-+ pr_err("Error: Vector array not found\n");
-+ goto err;
-+ }
-+
-+ if (len != num_usecases * num_paths * sizeof(uint32_t) * 4) {
-+ pr_err("Error: Length-error on getting vectors\n");
-+ goto err;
-+ }
-+
-+ for (i = 0; i < num_usecases; i++) {
-+ usecase[i].num_paths = num_paths;
-+ usecase[i].vectors = devm_kzalloc(&pdev->dev, num_paths *
-+ sizeof(struct msm_bus_vectors), GFP_KERNEL);
-+ if (!usecase[i].vectors) {
-+ mem_err = true;
-+ pr_err("Error: Mem alloc failure in vectors\n");
-+ goto err;
-+ }
-+
-+ for (j = 0; j < num_paths; j++) {
-+ int index = ((i * num_paths) + j) * 4;
-+ usecase[i].vectors[j].src = be32_to_cpu(vec_arr[index]);
-+ usecase[i].vectors[j].dst =
-+ be32_to_cpu(vec_arr[index + 1]);
-+ usecase[i].vectors[j].ab = (uint64_t)
-+ KBTOB(be32_to_cpu(vec_arr[index + 2]));
-+ usecase[i].vectors[j].ib = (uint64_t)
-+ KBTOB(be32_to_cpu(vec_arr[index + 3]));
-+ }
-+ }
-+
-+ pdata->usecase = usecase;
-+ return pdata;
-+err:
-+ if (mem_err) {
-+ for (; i > 0; i--)
-+ kfree(usecase[i-1].vectors);
-+
-+ kfree(usecase);
-+ kfree(pdata);
-+ }
-+
-+ return NULL;
-+}
-+
-+/**
-+ * msm_bus_cl_get_pdata() - Generate bus client data from device tree
-+ * provided by clients.
-+ *
-+ * of_node: Device tree node to extract information from
-+ *
-+ * The function returns a valid pointer to the allocated bus-scale-pdata
-+ * if the vectors were correctly read from the client's device node.
-+ * Any error in reading or parsing the device node will return NULL
-+ * to the caller.
-+ */
-+struct msm_bus_scale_pdata *msm_bus_cl_get_pdata(struct platform_device *pdev)
-+{
-+ struct device_node *of_node;
-+ struct msm_bus_scale_pdata *pdata = NULL;
-+
-+ if (!pdev) {
-+ pr_err("Error: Null Platform device\n");
-+ return NULL;
-+ }
-+
-+ of_node = pdev->dev.of_node;
-+ pdata = get_pdata(pdev, of_node);
-+ if (!pdata) {
-+ pr_err("client has to provide missing entry for successful registration\n");
-+ return NULL;
-+ }
-+
-+ return pdata;
-+}
-+EXPORT_SYMBOL(msm_bus_cl_get_pdata);
-+
-+/**
-+ * msm_bus_cl_pdata_from_node() - Generate bus client data from device tree
-+ * node provided by clients. This function should be used when a client
-+ * driver needs to register multiple bus-clients from a single device-tree
-+ * node associated with the platform-device.
-+ *
-+ * of_node: The subnode containing information about the bus scaling
-+ * data
-+ *
-+ * pdev: Platform device associated with the device-tree node
-+ *
-+ * The function returns a valid pointer to the allocated bus-scale-pdata
-+ * if the vectors were correctly read from the client's device node.
-+ * Any error in reading or parsing the device node will return NULL
-+ * to the caller.
-+ */
-+struct msm_bus_scale_pdata *msm_bus_pdata_from_node(
-+ struct platform_device *pdev, struct device_node *of_node)
-+{
-+ struct msm_bus_scale_pdata *pdata = NULL;
-+
-+ if (!pdev) {
-+ pr_err("Error: Null Platform device\n");
-+ return NULL;
-+ }
-+
-+ if (!of_node) {
-+ pr_err("Error: Null of_node passed to bus driver\n");
-+ return NULL;
-+ }
-+
-+ pdata = get_pdata(pdev, of_node);
-+ if (!pdata) {
-+ pr_err("client has to provide missing entry for successful registration\n");
-+ return NULL;
-+ }
-+
-+ return pdata;
-+}
-+EXPORT_SYMBOL(msm_bus_pdata_from_node);
-+
-+/**
-+ * msm_bus_cl_clear_pdata() - Clear pdata allocated from device-tree
-+ * of_node: Device tree node to extract information from
-+ */
-+void msm_bus_cl_clear_pdata(struct msm_bus_scale_pdata *pdata)
-+{
-+ int i;
-+
-+ for (i = 0; i < pdata->num_usecases; i++)
-+ kfree(pdata->usecase[i].vectors);
-+
-+ kfree(pdata->usecase);
-+ kfree(pdata);
-+}
-+EXPORT_SYMBOL(msm_bus_cl_clear_pdata);
-+#endif
-+
-+static int *get_arr(struct platform_device *pdev,
-+ const struct device_node *node, const char *prop,
-+ int *nports)
-+{
-+ int size = 0, ret;
-+ int *arr = NULL;
-+
-+ if (of_get_property(node, prop, &size)) {
-+ *nports = size / sizeof(int);
-+ } else {
-+ pr_debug("Property %s not available\n", prop);
-+ *nports = 0;
-+ return NULL;
-+ }
-+
-+ if (!size) {
-+ *nports = 0;
-+ return NULL;
-+ }
-+
-+ arr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
-+ if (ZERO_OR_NULL_PTR(arr)) {
-+ pr_err("Error: Failed to alloc mem for %s\n", prop);
-+ return NULL;
-+ }
-+
-+ ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports);
-+ if (ret) {
-+ pr_err("Error in reading property: %s\n", prop);
-+ goto err;
-+ }
-+
-+ return arr;
-+err:
-+ devm_kfree(&pdev->dev, arr);
-+ return NULL;
-+}
-+
-+static u64 *get_th_params(struct platform_device *pdev,
-+ const struct device_node *node, const char *prop,
-+ int *nports)
-+{
-+ int size = 0, ret;
-+ u64 *ret_arr = NULL;
-+ int *arr = NULL;
-+ int i;
-+
-+ if (of_get_property(node, prop, &size)) {
-+ *nports = size / sizeof(int);
-+ } else {
-+ pr_debug("Property %s not available\n", prop);
-+ *nports = 0;
-+ return NULL;
-+ }
-+
-+ if (!size) {
-+ *nports = 0;
-+ return NULL;
-+ }
-+
-+ ret_arr = devm_kzalloc(&pdev->dev, (*nports * sizeof(u64)),
-+ GFP_KERNEL);
-+ if (ZERO_OR_NULL_PTR(ret_arr)) {
-+ pr_err("Error: Failed to alloc mem for ret arr %s\n", prop);
-+ return NULL;
-+ }
-+
-+ arr = kzalloc(size, GFP_KERNEL);
-+ if ((ZERO_OR_NULL_PTR(arr))) {
-+ pr_err("Error: Failed to alloc temp mem for %s\n", prop);
-+ return NULL;
-+ }
-+
-+ ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports);
-+ if (ret) {
-+ pr_err("Error in reading property: %s\n", prop);
-+ goto err;
-+ }
-+
-+ for (i = 0; i < *nports; i++)
-+ ret_arr[i] = (uint64_t)KBTOB(arr[i]);
-+
-+ MSM_BUS_DBG("%s: num entries %d prop %s", __func__, *nports, prop);
-+
-+ for (i = 0; i < *nports; i++)
-+ MSM_BUS_DBG("Th %d val %llu", i, ret_arr[i]);
-+
-+ kfree(arr);
-+ return ret_arr;
-+err:
-+ kfree(arr);
-+ devm_kfree(&pdev->dev, ret_arr);
-+ return NULL;
-+}
-+
-+static struct msm_bus_node_info *get_nodes(struct device_node *of_node,
-+ struct platform_device *pdev,
-+ struct msm_bus_fabric_registration *pdata)
-+{
-+ struct msm_bus_node_info *info;
-+ struct device_node *child_node = NULL;
-+ int i = 0, ret;
-+ int num_bw = 0;
-+ u32 temp;
-+
-+ for_each_child_of_node(of_node, child_node) {
-+ i++;
-+ }
-+
-+ pdata->len = i;
-+ info = (struct msm_bus_node_info *)
-+ devm_kzalloc(&pdev->dev, sizeof(struct msm_bus_node_info) *
-+ pdata->len, GFP_KERNEL);
-+ if (ZERO_OR_NULL_PTR(info)) {
-+ pr_err("Failed to alloc memory for nodes: %d\n", pdata->len);
-+ goto err;
-+ }
-+
-+ i = 0;
-+ child_node = NULL;
-+ for_each_child_of_node(of_node, child_node) {
-+ const char *sel_str;
-+
-+ ret = of_property_read_string(child_node, "label",
-+ &info[i].name);
-+ if (ret)
-+ pr_err("Error reading node label\n");
-+
-+ ret = of_property_read_u32(child_node, "cell-id", &info[i].id);
-+ if (ret) {
-+ pr_err("Error reading node id\n");
-+ goto err;
-+ }
-+
-+ if (of_property_read_bool(child_node, "qcom,gateway"))
-+ info[i].gateway = 1;
-+
-+ of_property_read_u32(child_node, "qcom,mas-hw-id",
-+ &info[i].mas_hw_id);
-+
-+ of_property_read_u32(child_node, "qcom,slv-hw-id",
-+ &info[i].slv_hw_id);
-+ info[i].masterp = get_arr(pdev, child_node,
-+ "qcom,masterp", &info[i].num_mports);
-+ /* No need to store number of qports */
-+ info[i].qport = get_arr(pdev, child_node,
-+ "qcom,qport", &ret);
-+ pdata->nmasters += info[i].num_mports;
-+
-+
-+ info[i].slavep = get_arr(pdev, child_node,
-+ "qcom,slavep", &info[i].num_sports);
-+ pdata->nslaves += info[i].num_sports;
-+
-+
-+ info[i].tier = get_arr(pdev, child_node,
-+ "qcom,tier", &info[i].num_tiers);
-+
-+ if (of_property_read_bool(child_node, "qcom,ahb"))
-+ info[i].ahb = 1;
-+
-+ ret = of_property_read_string(child_node, "qcom,hw-sel",
-+ &sel_str);
-+ if (ret)
-+ info[i].hw_sel = 0;
-+ else {
-+ ret = get_num(hw_sel_name, sel_str);
-+ if (ret < 0) {
-+ pr_err("Invalid hw-sel\n");
-+ goto err;
-+ }
-+
-+ info[i].hw_sel = ret;
-+ }
-+
-+ of_property_read_u32(child_node, "qcom,buswidth",
-+ &info[i].buswidth);
-+ of_property_read_u32(child_node, "qcom,ws", &info[i].ws);
-+
-+ info[i].dual_conf =
-+ of_property_read_bool(child_node, "qcom,dual-conf");
-+
-+
-+ info[i].th = get_th_params(pdev, child_node, "qcom,thresh",
-+ &info[i].num_thresh);
-+
-+ info[i].bimc_bw = get_th_params(pdev, child_node,
-+ "qcom,bimc,bw", &num_bw);
-+
-+ if (num_bw != info[i].num_thresh) {
-+ pr_err("%s:num_bw %d must equal num_thresh %d",
-+ __func__, num_bw, info[i].num_thresh);
-+ pr_err("%s:Err setting up dual conf for %s",
-+ __func__, info[i].name);
-+ goto err;
-+ }
-+
-+ of_property_read_u32(child_node, "qcom,bimc,gp",
-+ &info[i].bimc_gp);
-+ of_property_read_u32(child_node, "qcom,bimc,thmp",
-+ &info[i].bimc_thmp);
-+
-+ ret = of_property_read_string(child_node, "qcom,mode-thresh",
-+ &sel_str);
-+ if (ret)
-+ info[i].mode_thresh = 0;
-+ else {
-+ ret = get_num(mode_sel_name, sel_str);
-+ if (ret < 0) {
-+ pr_err("Unknown mode :%s\n", sel_str);
-+ goto err;
-+ }
-+
-+ info[i].mode_thresh = ret;
-+ MSM_BUS_DBG("AXI: THreshold mode set: %d\n",
-+ info[i].mode_thresh);
-+ }
-+
-+ ret = of_property_read_string(child_node, "qcom,mode",
-+ &sel_str);
-+
-+ if (ret)
-+ info[i].mode = 0;
-+ else {
-+ ret = get_num(mode_sel_name, sel_str);
-+ if (ret < 0) {
-+ pr_err("Unknown mode :%s\n", sel_str);
-+ goto err;
-+ }
-+
-+ info[i].mode = ret;
-+ }
-+
-+ info[i].nr_lim =
-+ of_property_read_bool(child_node, "qcom,nr-lim");
-+
-+ ret = of_property_read_u32(child_node, "qcom,ff",
-+ &info[i].ff);
-+ if (ret) {
-+ pr_debug("fudge factor not present %d", info[i].id);
-+ info[i].ff = 0;
-+ }
-+
-+ ret = of_property_read_u32(child_node, "qcom,floor-bw",
-+ &temp);
-+ if (ret) {
-+ pr_debug("fabdev floor bw not present %d", info[i].id);
-+ info[i].floor_bw = 0;
-+ } else {
-+ info[i].floor_bw = KBTOB(temp);
-+ }
-+
-+ info[i].rt_mas =
-+ of_property_read_bool(child_node, "qcom,rt-mas");
-+
-+ ret = of_property_read_string(child_node, "qcom,perm-mode",
-+ &sel_str);
-+ if (ret)
-+ info[i].perm_mode = 0;
-+ else {
-+ ret = get_num(mode_sel_name, sel_str);
-+ if (ret < 0)
-+ goto err;
-+
-+ info[i].perm_mode = 1 << ret;
-+ }
-+
-+ of_property_read_u32(child_node, "qcom,prio-lvl",
-+ &info[i].prio_lvl);
-+ of_property_read_u32(child_node, "qcom,prio-rd",
-+ &info[i].prio_rd);
-+ of_property_read_u32(child_node, "qcom,prio-wr",
-+ &info[i].prio_wr);
-+ of_property_read_u32(child_node, "qcom,prio0", &info[i].prio0);
-+ of_property_read_u32(child_node, "qcom,prio1", &info[i].prio1);
-+ ret = of_property_read_string(child_node, "qcom,slaveclk-dual",
-+ &info[i].slaveclk[DUAL_CTX]);
-+ if (!ret)
-+ pr_debug("Got slaveclk_dual: %s\n",
-+ info[i].slaveclk[DUAL_CTX]);
-+ else
-+ info[i].slaveclk[DUAL_CTX] = NULL;
-+
-+ ret = of_property_read_string(child_node,
-+ "qcom,slaveclk-active", &info[i].slaveclk[ACTIVE_CTX]);
-+ if (!ret)
-+ pr_debug("Got slaveclk_active\n");
-+ else
-+ info[i].slaveclk[ACTIVE_CTX] = NULL;
-+
-+ ret = of_property_read_string(child_node, "qcom,memclk-dual",
-+ &info[i].memclk[DUAL_CTX]);
-+ if (!ret)
-+ pr_debug("Got memclk_dual\n");
-+ else
-+ info[i].memclk[DUAL_CTX] = NULL;
-+
-+ ret = of_property_read_string(child_node, "qcom,memclk-active",
-+ &info[i].memclk[ACTIVE_CTX]);
-+ if (!ret)
-+ pr_debug("Got memclk_active\n");
-+ else
-+ info[i].memclk[ACTIVE_CTX] = NULL;
-+
-+ ret = of_property_read_string(child_node, "qcom,iface-clk-node",
-+ &info[i].iface_clk_node);
-+ if (!ret)
-+ pr_debug("Got iface_clk_node\n");
-+ else
-+ info[i].iface_clk_node = NULL;
-+
-+ pr_debug("Node name: %s\n", info[i].name);
-+ of_node_put(child_node);
-+ i++;
-+ }
-+
-+ pr_debug("Bus %d added: %d masters\n", pdata->id, pdata->nmasters);
-+ pr_debug("Bus %d added: %d slaves\n", pdata->id, pdata->nslaves);
-+ return info;
-+err:
-+ return NULL;
-+}
-+
-+void msm_bus_of_get_nfab(struct platform_device *pdev,
-+ struct msm_bus_fabric_registration *pdata)
-+{
-+ struct device_node *of_node;
-+ int ret, nfab = 0;
-+
-+ if (!pdev) {
-+ pr_err("Error: Null platform device\n");
-+ return;
-+ }
-+
-+ of_node = pdev->dev.of_node;
-+ ret = of_property_read_u32(of_node, "qcom,nfab",
-+ &nfab);
-+ if (!ret)
-+ pr_debug("Fab_of: Read number of buses: %u\n", nfab);
-+
-+ msm_bus_board_set_nfab(pdata, nfab);
-+}
-+
-+struct msm_bus_fabric_registration
-+ *msm_bus_of_get_fab_data(struct platform_device *pdev)
-+{
-+ struct device_node *of_node;
-+ struct msm_bus_fabric_registration *pdata;
-+ bool mem_err = false;
-+ int ret = 0;
-+ const char *sel_str;
-+ u32 temp;
-+
-+ if (!pdev) {
-+ pr_err("Error: Null platform device\n");
-+ return NULL;
-+ }
-+
-+ of_node = pdev->dev.of_node;
-+ pdata = devm_kzalloc(&pdev->dev,
-+ sizeof(struct msm_bus_fabric_registration), GFP_KERNEL);
-+ if (!pdata) {
-+ pr_err("Error: Memory allocation for pdata failed\n");
-+ mem_err = true;
-+ goto err;
-+ }
-+
-+ ret = of_property_read_string(of_node, "label", &pdata->name);
-+ if (ret) {
-+ pr_err("Error: label not found\n");
-+ goto err;
-+ }
-+ pr_debug("Fab_of: Read name: %s\n", pdata->name);
-+
-+ ret = of_property_read_u32(of_node, "cell-id",
-+ &pdata->id);
-+ if (ret) {
-+ pr_err("Error: num-usecases not found\n");
-+ goto err;
-+ }
-+ pr_debug("Fab_of: Read id: %u\n", pdata->id);
-+
-+ if (of_property_read_bool(of_node, "qcom,ahb"))
-+ pdata->ahb = 1;
-+
-+ ret = of_property_read_string(of_node, "qcom,fabclk-dual",
-+ &pdata->fabclk[DUAL_CTX]);
-+ if (ret) {
-+ pr_debug("fabclk_dual not available\n");
-+ pdata->fabclk[DUAL_CTX] = NULL;
-+ } else
-+ pr_debug("Fab_of: Read clk dual ctx: %s\n",
-+ pdata->fabclk[DUAL_CTX]);
-+ ret = of_property_read_string(of_node, "qcom,fabclk-active",
-+ &pdata->fabclk[ACTIVE_CTX]);
-+ if (ret) {
-+ pr_debug("Error: fabclk_active not available\n");
-+ pdata->fabclk[ACTIVE_CTX] = NULL;
-+ } else
-+ pr_debug("Fab_of: Read clk act ctx: %s\n",
-+ pdata->fabclk[ACTIVE_CTX]);
-+
-+ ret = of_property_read_u32(of_node, "qcom,ntieredslaves",
-+ &pdata->ntieredslaves);
-+ if (ret) {
-+ pr_err("Error: ntieredslaves not found\n");
-+ goto err;
-+ }
-+
-+ ret = of_property_read_u32(of_node, "qcom,qos-freq", &pdata->qos_freq);
-+ if (ret)
-+ pr_debug("qos_freq not available\n");
-+
-+ ret = of_property_read_string(of_node, "qcom,hw-sel", &sel_str);
-+ if (ret) {
-+ pr_err("Error: hw_sel not found\n");
-+ goto err;
-+ } else {
-+ ret = get_num(hw_sel_name, sel_str);
-+ if (ret < 0)
-+ goto err;
-+
-+ pdata->hw_sel = ret;
-+ }
-+
-+ if (of_property_read_bool(of_node, "qcom,virt"))
-+ pdata->virt = true;
-+
-+ ret = of_property_read_u32(of_node, "qcom,qos-baseoffset",
-+ &pdata->qos_baseoffset);
-+ if (ret)
-+ pr_debug("%s:qos_baseoffset not available\n", __func__);
-+
-+ ret = of_property_read_u32(of_node, "qcom,qos-delta",
-+ &pdata->qos_delta);
-+ if (ret)
-+ pr_debug("%s:qos_delta not available\n", __func__);
-+
-+ if (of_property_read_bool(of_node, "qcom,rpm-en"))
-+ pdata->rpm_enabled = 1;
-+
-+ ret = of_property_read_u32(of_node, "qcom,nr-lim-thresh",
-+ &temp);
-+
-+ if (ret) {
-+ pr_err("nr-lim threshold not specified");
-+ pdata->nr_lim_thresh = 0;
-+ } else {
-+ pdata->nr_lim_thresh = KBTOB(temp);
-+ }
-+
-+ ret = of_property_read_u32(of_node, "qcom,eff-fact",
-+ &pdata->eff_fact);
-+ if (ret) {
-+ pr_err("Fab eff-factor not present");
-+ pdata->eff_fact = 0;
-+ }
-+
-+ pdata->info = get_nodes(of_node, pdev, pdata);
-+ return pdata;
-+err:
-+ return NULL;
-+}
-+EXPORT_SYMBOL(msm_bus_of_get_fab_data);
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_of_adhoc.c
-@@ -0,0 +1,641 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#define pr_fmt(fmt) "AXI: %s(): " fmt, __func__
-+
-+#include <linux/clk.h>
-+#include <linux/device.h>
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/string.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/platform_device.h>
-+#include "msm-bus.h"
-+#include "msm-bus-board.h"
-+#include "msm_bus_rules.h"
-+#include "msm_bus_core.h"
-+#include "msm_bus_adhoc.h"
-+
-+#define DEFAULT_QOS_FREQ 19200
-+#define DEFAULT_UTIL_FACT 100
-+#define DEFAULT_VRAIL_COMP 100
-+
-+static int get_qos_mode(struct platform_device *pdev,
-+ struct device_node *node, const char *qos_mode)
-+{
-+ const char *qos_names[] = {"fixed", "limiter", "bypass", "regulator"};
-+ int i = 0;
-+ int ret = -1;
-+
-+ if (!qos_mode)
-+ goto exit_get_qos_mode;
-+
-+ for (i = 0; i < ARRAY_SIZE(qos_names); i++) {
-+ if (!strcmp(qos_mode, qos_names[i]))
-+ break;
-+ }
-+ if (i == ARRAY_SIZE(qos_names))
-+ dev_err(&pdev->dev, "Cannot match mode qos %s using Bypass",
-+ qos_mode);
-+ else
-+ ret = i;
-+
-+exit_get_qos_mode:
-+ return ret;
-+}
-+
-+static int *get_arr(struct platform_device *pdev,
-+ struct device_node *node, const char *prop,
-+ int *nports)
-+{
-+ int size = 0, ret;
-+ int *arr = NULL;
-+
-+ if (of_get_property(node, prop, &size)) {
-+ *nports = size / sizeof(int);
-+ } else {
-+ dev_dbg(&pdev->dev, "Property %s not available\n", prop);
-+ *nports = 0;
-+ return NULL;
-+ }
-+
-+ arr = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
-+ if ((size > 0) && ZERO_OR_NULL_PTR(arr)) {
-+ dev_err(&pdev->dev, "Error: Failed to alloc mem for %s\n",
-+ prop);
-+ return NULL;
-+ }
-+
-+ ret = of_property_read_u32_array(node, prop, (u32 *)arr, *nports);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Error in reading property: %s\n", prop);
-+ goto arr_err;
-+ }
-+
-+ return arr;
-+arr_err:
-+ devm_kfree(&pdev->dev, arr);
-+ return NULL;
-+}
-+
-+static struct msm_bus_fab_device_type *get_fab_device_info(
-+ struct device_node *dev_node,
-+ struct platform_device *pdev)
-+{
-+ struct msm_bus_fab_device_type *fab_dev;
-+ unsigned int ret;
-+ struct resource *res;
-+ const char *base_name;
-+
-+ fab_dev = devm_kzalloc(&pdev->dev,
-+ sizeof(struct msm_bus_fab_device_type),
-+ GFP_KERNEL);
-+ if (!fab_dev) {
-+ dev_err(&pdev->dev,
-+ "Error: Unable to allocate memory for fab_dev\n");
-+ return NULL;
-+ }
-+
-+ ret = of_property_read_string(dev_node, "qcom,base-name", &base_name);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Error: Unable to get base address name\n");
-+ goto fab_dev_err;
-+ }
-+
-+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, base_name);
-+ if (!res) {
-+ dev_err(&pdev->dev, "Error getting qos base addr %s\n",
-+ base_name);
-+ goto fab_dev_err;
-+ }
-+ fab_dev->pqos_base = res->start;
-+ fab_dev->qos_range = resource_size(res);
-+ fab_dev->bypass_qos_prg = of_property_read_bool(dev_node,
-+ "qcom,bypass-qos-prg");
-+
-+ ret = of_property_read_u32(dev_node, "qcom,base-offset",
-+ &fab_dev->base_offset);
-+ if (ret)
-+ dev_dbg(&pdev->dev, "Bus base offset is missing\n");
-+
-+ ret = of_property_read_u32(dev_node, "qcom,qos-off",
-+ &fab_dev->qos_off);
-+ if (ret)
-+ dev_dbg(&pdev->dev, "Bus qos off is missing\n");
-+
-+
-+ ret = of_property_read_u32(dev_node, "qcom,bus-type",
-+ &fab_dev->bus_type);
-+ if (ret) {
-+ dev_warn(&pdev->dev, "Bus type is missing\n");
-+ goto fab_dev_err;
-+ }
-+
-+ ret = of_property_read_u32(dev_node, "qcom,qos-freq",
-+ &fab_dev->qos_freq);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "Bus qos freq is missing\n");
-+ fab_dev->qos_freq = DEFAULT_QOS_FREQ;
-+ }
-+
-+ ret = of_property_read_u32(dev_node, "qcom,util-fact",
-+ &fab_dev->util_fact);
-+ if (ret) {
-+ dev_info(&pdev->dev, "Util-fact is missing, default to %d\n",
-+ DEFAULT_UTIL_FACT);
-+ fab_dev->util_fact = DEFAULT_UTIL_FACT;
-+ }
-+
-+ ret = of_property_read_u32(dev_node, "qcom,vrail-comp",
-+ &fab_dev->vrail_comp);
-+ if (ret) {
-+ dev_info(&pdev->dev, "Vrail-comp is missing, default to %d\n",
-+ DEFAULT_VRAIL_COMP);
-+ fab_dev->vrail_comp = DEFAULT_VRAIL_COMP;
-+ }
-+
-+ return fab_dev;
-+
-+fab_dev_err:
-+ devm_kfree(&pdev->dev, fab_dev);
-+ fab_dev = 0;
-+ return NULL;
-+}
-+
-+static void get_qos_params(
-+ struct device_node * const dev_node,
-+ struct platform_device * const pdev,
-+ struct msm_bus_node_info_type *node_info)
-+{
-+ const char *qos_mode = NULL;
-+ unsigned int ret;
-+ unsigned int temp;
-+
-+ ret = of_property_read_string(dev_node, "qcom,qos-mode", &qos_mode);
-+
-+ if (ret)
-+ node_info->qos_params.mode = -1;
-+ else
-+ node_info->qos_params.mode = get_qos_mode(pdev, dev_node,
-+ qos_mode);
-+
-+ of_property_read_u32(dev_node, "qcom,prio-lvl",
-+ &node_info->qos_params.prio_lvl);
-+
-+ of_property_read_u32(dev_node, "qcom,prio1",
-+ &node_info->qos_params.prio1);
-+
-+ of_property_read_u32(dev_node, "qcom,prio0",
-+ &node_info->qos_params.prio0);
-+
-+ of_property_read_u32(dev_node, "qcom,prio-rd",
-+ &node_info->qos_params.prio_rd);
-+
-+ of_property_read_u32(dev_node, "qcom,prio-wr",
-+ &node_info->qos_params.prio_wr);
-+
-+ of_property_read_u32(dev_node, "qcom,gp",
-+ &node_info->qos_params.gp);
-+
-+ of_property_read_u32(dev_node, "qcom,thmp",
-+ &node_info->qos_params.thmp);
-+
-+ of_property_read_u32(dev_node, "qcom,ws",
-+ &node_info->qos_params.ws);
-+
-+ ret = of_property_read_u32(dev_node, "qcom,bw_buffer", &temp);
-+
-+ if (ret)
-+ node_info->qos_params.bw_buffer = 0;
-+ else
-+ node_info->qos_params.bw_buffer = KBTOB(temp);
-+
-+}
-+
-+
-+static struct msm_bus_node_info_type *get_node_info_data(
-+ struct device_node * const dev_node,
-+ struct platform_device * const pdev)
-+{
-+ struct msm_bus_node_info_type *node_info;
-+ unsigned int ret;
-+ int size;
-+ int i;
-+ struct device_node *con_node;
-+ struct device_node *bus_dev;
-+
-+ node_info = devm_kzalloc(&pdev->dev,
-+ sizeof(struct msm_bus_node_info_type),
-+ GFP_KERNEL);
-+ if (!node_info) {
-+ dev_err(&pdev->dev,
-+ "Error: Unable to allocate memory for node_info\n");
-+ return NULL;
-+ }
-+
-+ ret = of_property_read_u32(dev_node, "cell-id", &node_info->id);
-+ if (ret) {
-+ dev_warn(&pdev->dev, "Bus node is missing cell-id\n");
-+ goto node_info_err;
-+ }
-+ ret = of_property_read_string(dev_node, "label", &node_info->name);
-+ if (ret) {
-+ dev_warn(&pdev->dev, "Bus node is missing name\n");
-+ goto node_info_err;
-+ }
-+ node_info->qport = get_arr(pdev, dev_node, "qcom,qport",
-+ &node_info->num_qports);
-+
-+ if (of_get_property(dev_node, "qcom,connections", &size)) {
-+ node_info->num_connections = size / sizeof(int);
-+ node_info->connections = devm_kzalloc(&pdev->dev, size,
-+ GFP_KERNEL);
-+ } else {
-+ node_info->num_connections = 0;
-+ node_info->connections = 0;
-+ }
-+
-+ for (i = 0; i < node_info->num_connections; i++) {
-+ con_node = of_parse_phandle(dev_node, "qcom,connections", i);
-+ if (IS_ERR_OR_NULL(con_node))
-+ goto node_info_err;
-+
-+ if (of_property_read_u32(con_node, "cell-id",
-+ &node_info->connections[i]))
-+ goto node_info_err;
-+ of_node_put(con_node);
-+ }
-+
-+ if (of_get_property(dev_node, "qcom,blacklist", &size)) {
-+ node_info->num_blist = size/sizeof(u32);
-+ node_info->black_listed_connections = devm_kzalloc(&pdev->dev,
-+ size, GFP_KERNEL);
-+ } else {
-+ node_info->num_blist = 0;
-+ node_info->black_listed_connections = 0;
-+ }
-+
-+ for (i = 0; i < node_info->num_blist; i++) {
-+ con_node = of_parse_phandle(dev_node, "qcom,blacklist", i);
-+ if (IS_ERR_OR_NULL(con_node))
-+ goto node_info_err;
-+
-+ if (of_property_read_u32(con_node, "cell-id",
-+ &node_info->black_listed_connections[i]))
-+ goto node_info_err;
-+ of_node_put(con_node);
-+ }
-+
-+ bus_dev = of_parse_phandle(dev_node, "qcom,bus-dev", 0);
-+ if (!IS_ERR_OR_NULL(bus_dev)) {
-+ if (of_property_read_u32(bus_dev, "cell-id",
-+ &node_info->bus_device_id)) {
-+ dev_err(&pdev->dev, "Can't find bus device. Node %d",
-+ node_info->id);
-+ goto node_info_err;
-+ }
-+
-+ of_node_put(bus_dev);
-+ } else
-+ dev_dbg(&pdev->dev, "Can't find bdev phandle for %d",
-+ node_info->id);
-+
-+ node_info->is_fab_dev = of_property_read_bool(dev_node, "qcom,fab-dev");
-+ node_info->virt_dev = of_property_read_bool(dev_node, "qcom,virt-dev");
-+
-+ ret = of_property_read_u32(dev_node, "qcom,buswidth",
-+ &node_info->buswidth);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "Using default 8 bytes %d", node_info->id);
-+ node_info->buswidth = 8;
-+ }
-+
-+ ret = of_property_read_u32(dev_node, "qcom,mas-rpm-id",
-+ &node_info->mas_rpm_id);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "mas rpm id is missing\n");
-+ node_info->mas_rpm_id = -1;
-+ }
-+
-+ ret = of_property_read_u32(dev_node, "qcom,slv-rpm-id",
-+ &node_info->slv_rpm_id);
-+ if (ret) {
-+ dev_dbg(&pdev->dev, "slv rpm id is missing\n");
-+ node_info->slv_rpm_id = -1;
-+ }
-+ ret = of_property_read_u32(dev_node, "qcom,util-fact",
-+ &node_info->util_fact);
-+ if (ret)
-+ node_info->util_fact = 0;
-+ ret = of_property_read_u32(dev_node, "qcom,vrail-comp",
-+ &node_info->vrail_comp);
-+ if (ret)
-+ node_info->vrail_comp = 0;
-+ get_qos_params(dev_node, pdev, node_info);
-+
-+ return node_info;
-+
-+node_info_err:
-+ devm_kfree(&pdev->dev, node_info);
-+ node_info = 0;
-+ return NULL;
-+}
-+
-+static unsigned int get_bus_node_device_data(
-+ struct device_node * const dev_node,
-+ struct platform_device * const pdev,
-+ struct msm_bus_node_device_type * const node_device)
-+{
-+ node_device->node_info = get_node_info_data(dev_node, pdev);
-+ if (IS_ERR_OR_NULL(node_device->node_info)) {
-+ dev_err(&pdev->dev, "Error: Node info missing\n");
-+ return -ENODATA;
-+ }
-+ node_device->ap_owned = of_property_read_bool(dev_node,
-+ "qcom,ap-owned");
-+
-+ if (node_device->node_info->is_fab_dev) {
-+ dev_dbg(&pdev->dev, "Dev %d\n", node_device->node_info->id);
-+
-+ if (!node_device->node_info->virt_dev) {
-+ node_device->fabdev =
-+ get_fab_device_info(dev_node, pdev);
-+ if (IS_ERR_OR_NULL(node_device->fabdev)) {
-+ dev_err(&pdev->dev,
-+ "Error: Fabric device info missing\n");
-+ devm_kfree(&pdev->dev, node_device->node_info);
-+ return -ENODATA;
-+ }
-+ }
-+ node_device->clk[DUAL_CTX].clk = of_clk_get_by_name(dev_node,
-+ "bus_clk");
-+
-+ if (IS_ERR_OR_NULL(node_device->clk[DUAL_CTX].clk))
-+ dev_dbg(&pdev->dev,
-+ "%s:Failed to get bus clk for bus%d ctx%d",
-+ __func__, node_device->node_info->id,
-+ DUAL_CTX);
-+
-+ node_device->clk[ACTIVE_CTX].clk = of_clk_get_by_name(dev_node,
-+ "bus_a_clk");
-+ if (IS_ERR_OR_NULL(node_device->clk[ACTIVE_CTX].clk))
-+ dev_err(&pdev->dev,
-+ "Failed to get bus clk for bus%d ctx%d",
-+ node_device->node_info->id, ACTIVE_CTX);
-+ if (msmbus_coresight_init_adhoc(pdev, dev_node))
-+ dev_warn(&pdev->dev,
-+ "Coresight support absent for bus: %d\n",
-+ node_device->node_info->id);
-+ } else {
-+ node_device->qos_clk.clk = of_clk_get_by_name(dev_node,
-+ "bus_qos_clk");
-+
-+ if (IS_ERR_OR_NULL(node_device->qos_clk.clk))
-+ dev_dbg(&pdev->dev,
-+ "%s:Failed to get bus qos clk for mas%d",
-+ __func__, node_device->node_info->id);
-+
-+ node_device->clk[DUAL_CTX].clk = of_clk_get_by_name(dev_node,
-+ "node_clk");
-+
-+ if (IS_ERR_OR_NULL(node_device->clk[DUAL_CTX].clk))
-+ dev_dbg(&pdev->dev,
-+ "%s:Failed to get bus clk for bus%d ctx%d",
-+ __func__, node_device->node_info->id,
-+ DUAL_CTX);
-+
-+ }
-+ return 0;
-+}
-+
-+struct msm_bus_device_node_registration
-+ *msm_bus_of_to_pdata(struct platform_device *pdev)
-+{
-+ struct device_node *of_node, *child_node;
-+ struct msm_bus_device_node_registration *pdata;
-+ unsigned int i = 0, j;
-+ unsigned int ret;
-+
-+ if (!pdev) {
-+ pr_err("Error: Null platform device\n");
-+ return NULL;
-+ }
-+
-+ of_node = pdev->dev.of_node;
-+
-+ pdata = devm_kzalloc(&pdev->dev,
-+ sizeof(struct msm_bus_device_node_registration),
-+ GFP_KERNEL);
-+ if (!pdata) {
-+ dev_err(&pdev->dev,
-+ "Error: Memory allocation for pdata failed\n");
-+ return NULL;
-+ }
-+
-+ pdata->num_devices = of_get_child_count(of_node);
-+
-+ pdata->info = devm_kzalloc(&pdev->dev,
-+ sizeof(struct msm_bus_node_device_type) *
-+ pdata->num_devices, GFP_KERNEL);
-+
-+ if (!pdata->info) {
-+ dev_err(&pdev->dev,
-+ "Error: Memory allocation for pdata->info failed\n");
-+ goto node_reg_err;
-+ }
-+
-+ ret = 0;
-+ for_each_child_of_node(of_node, child_node) {
-+ ret = get_bus_node_device_data(child_node, pdev,
-+ &pdata->info[i]);
-+ if (ret) {
-+ dev_err(&pdev->dev, "Error: unable to initialize bus nodes\n");
-+ goto node_reg_err_1;
-+ }
-+ i++;
-+ }
-+
-+ dev_dbg(&pdev->dev, "bus topology:\n");
-+ for (i = 0; i < pdata->num_devices; i++) {
-+ dev_dbg(&pdev->dev, "id %d\nnum_qports %d\nnum_connections %d",
-+ pdata->info[i].node_info->id,
-+ pdata->info[i].node_info->num_qports,
-+ pdata->info[i].node_info->num_connections);
-+ dev_dbg(&pdev->dev, "\nbus_device_id %d\n buswidth %d\n",
-+ pdata->info[i].node_info->bus_device_id,
-+ pdata->info[i].node_info->buswidth);
-+ for (j = 0; j < pdata->info[i].node_info->num_connections;
-+ j++) {
-+ dev_dbg(&pdev->dev, "connection[%d]: %d\n", j,
-+ pdata->info[i].node_info->connections[j]);
-+ }
-+ for (j = 0; j < pdata->info[i].node_info->num_blist;
-+ j++) {
-+ dev_dbg(&pdev->dev, "black_listed_node[%d]: %d\n", j,
-+ pdata->info[i].node_info->
-+ black_listed_connections[j]);
-+ }
-+ if (pdata->info[i].fabdev)
-+ dev_dbg(&pdev->dev, "base_addr %zu\nbus_type %d\n",
-+ (size_t)pdata->info[i].
-+ fabdev->pqos_base,
-+ pdata->info[i].fabdev->bus_type);
-+ }
-+ return pdata;
-+
-+node_reg_err_1:
-+ devm_kfree(&pdev->dev, pdata->info);
-+node_reg_err:
-+ devm_kfree(&pdev->dev, pdata);
-+ pdata = NULL;
-+ return NULL;
-+}
-+
-+static int msm_bus_of_get_ids(struct platform_device *pdev,
-+ struct device_node *dev_node, int **dev_ids,
-+ int *num_ids, char *prop_name)
-+{
-+ int ret = 0;
-+ int size, i;
-+ struct device_node *rule_node;
-+ int *ids = NULL;
-+
-+ if (of_get_property(dev_node, prop_name, &size)) {
-+ *num_ids = size / sizeof(int);
-+ ids = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
-+ } else {
-+ dev_err(&pdev->dev, "No rule nodes, skipping node");
-+ ret = -ENXIO;
-+ goto exit_get_ids;
-+ }
-+
-+ *dev_ids = ids;
-+ for (i = 0; i < *num_ids; i++) {
-+ rule_node = of_parse_phandle(dev_node, prop_name, i);
-+ if (IS_ERR_OR_NULL(rule_node)) {
-+ dev_err(&pdev->dev, "Can't get rule node id");
-+ ret = -ENXIO;
-+ goto err_get_ids;
-+ }
-+
-+ if (of_property_read_u32(rule_node, "cell-id",
-+ &ids[i])) {
-+ dev_err(&pdev->dev, "Can't get rule node id");
-+ ret = -ENXIO;
-+ goto err_get_ids;
-+ }
-+ of_node_put(rule_node);
-+ }
-+exit_get_ids:
-+ return ret;
-+err_get_ids:
-+ devm_kfree(&pdev->dev, ids);
-+ of_node_put(rule_node);
-+ ids = NULL;
-+ return ret;
-+}
-+
-+int msm_bus_of_get_static_rules(struct platform_device *pdev,
-+ struct bus_rule_type **static_rules)
-+{
-+ int ret = 0;
-+ struct device_node *of_node, *child_node;
-+ int num_rules = 0;
-+ int rule_idx = 0;
-+ int bw_fld = 0;
-+ int i;
-+ struct bus_rule_type *static_rule = NULL;
-+
-+ of_node = pdev->dev.of_node;
-+ num_rules = of_get_child_count(of_node);
-+ static_rule = devm_kzalloc(&pdev->dev,
-+ sizeof(struct bus_rule_type) * num_rules,
-+ GFP_KERNEL);
-+
-+ if (IS_ERR_OR_NULL(static_rule)) {
-+ ret = -ENOMEM;
-+ goto exit_static_rules;
-+ }
-+
-+ *static_rules = static_rule;
-+ for_each_child_of_node(of_node, child_node) {
-+ ret = msm_bus_of_get_ids(pdev, child_node,
-+ &static_rule[rule_idx].src_id,
-+ &static_rule[rule_idx].num_src,
-+ "qcom,src-nodes");
-+
-+ ret = msm_bus_of_get_ids(pdev, child_node,
-+ &static_rule[rule_idx].dst_node,
-+ &static_rule[rule_idx].num_dst,
-+ "qcom,dest-node");
-+
-+ ret = of_property_read_u32(child_node, "qcom,src-field",
-+ &static_rule[rule_idx].src_field);
-+ if (ret) {
-+ dev_err(&pdev->dev, "src-field missing");
-+ ret = -ENXIO;
-+ goto err_static_rules;
-+ }
-+
-+ ret = of_property_read_u32(child_node, "qcom,src-op",
-+ &static_rule[rule_idx].op);
-+ if (ret) {
-+ dev_err(&pdev->dev, "src-op missing");
-+ ret = -ENXIO;
-+ goto err_static_rules;
-+ }
-+
-+ ret = of_property_read_u32(child_node, "qcom,mode",
-+ &static_rule[rule_idx].mode);
-+ if (ret) {
-+ dev_err(&pdev->dev, "mode missing");
-+ ret = -ENXIO;
-+ goto err_static_rules;
-+ }
-+
-+ ret = of_property_read_u32(child_node, "qcom,thresh", &bw_fld);
-+ if (ret) {
-+ dev_err(&pdev->dev, "thresh missing");
-+ ret = -ENXIO;
-+ goto err_static_rules;
-+ } else
-+ static_rule[rule_idx].thresh = KBTOB(bw_fld);
-+
-+ ret = of_property_read_u32(child_node, "qcom,dest-bw",
-+ &bw_fld);
-+ if (ret)
-+ static_rule[rule_idx].dst_bw = 0;
-+ else
-+ static_rule[rule_idx].dst_bw = KBTOB(bw_fld);
-+
-+ rule_idx++;
-+ }
-+ ret = rule_idx;
-+exit_static_rules:
-+ return ret;
-+err_static_rules:
-+ for (i = 0; i < num_rules; i++) {
-+ if (!IS_ERR_OR_NULL(static_rule)) {
-+ if (!IS_ERR_OR_NULL(static_rule[i].src_id))
-+ devm_kfree(&pdev->dev,
-+ static_rule[i].src_id);
-+ if (!IS_ERR_OR_NULL(static_rule[i].dst_node))
-+ devm_kfree(&pdev->dev,
-+ static_rule[i].dst_node);
-+ devm_kfree(&pdev->dev, static_rule);
-+ }
-+ }
-+ devm_kfree(&pdev->dev, *static_rules);
-+ static_rules = NULL;
-+ return ret;
-+}
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_rules.c
-@@ -0,0 +1,624 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/list_sort.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include "msm-bus-board.h"
-+#include "msm_bus_rules.h"
-+#include <trace/events/trace_msm_bus.h>
-+
-+struct node_vote_info {
-+ int id;
-+ u64 ib;
-+ u64 ab;
-+ u64 clk;
-+};
-+
-+struct rules_def {
-+ int rule_id;
-+ int num_src;
-+ int state;
-+ struct node_vote_info *src_info;
-+ struct bus_rule_type rule_ops;
-+ bool state_change;
-+ struct list_head link;
-+};
-+
-+struct rule_node_info {
-+ int id;
-+ void *data;
-+ struct raw_notifier_head rule_notify_list;
-+ int cur_rule;
-+ int num_rules;
-+ struct list_head node_rules;
-+ struct list_head link;
-+ struct rule_apply_rcm_info apply;
-+};
-+
-+DEFINE_MUTEX(msm_bus_rules_lock);
-+static LIST_HEAD(node_list);
-+static struct rule_node_info *get_node(u32 id, void *data);
-+
-+#define LE(op1, op2) (op1 <= op2)
-+#define LT(op1, op2) (op1 < op2)
-+#define GE(op1, op2) (op1 >= op2)
-+#define GT(op1, op2) (op1 > op2)
-+#define NB_ID (0x201)
-+
-+static struct rule_node_info *get_node(u32 id, void *data)
-+{
-+ struct rule_node_info *node_it = NULL;
-+ struct rule_node_info *node_match = NULL;
-+
-+ list_for_each_entry(node_it, &node_list, link) {
-+ if (node_it->id == id) {
-+ if ((id == NB_ID)) {
-+ if ((node_it->data == data)) {
-+ node_match = node_it;
-+ break;
-+ }
-+ } else {
-+ node_match = node_it;
-+ break;
-+ }
-+ }
-+ }
-+ return node_match;
-+}
-+
-+static struct rule_node_info *gen_node(u32 id, void *data)
-+{
-+ struct rule_node_info *node_it = NULL;
-+ struct rule_node_info *node_match = NULL;
-+
-+ list_for_each_entry(node_it, &node_list, link) {
-+ if (node_it->id == id) {
-+ node_match = node_it;
-+ break;
-+ }
-+ }
-+
-+ if (!node_match) {
-+ node_match = kzalloc(sizeof(struct rule_node_info), GFP_KERNEL);
-+ if (!node_match) {
-+ pr_err("%s: Cannot allocate memory", __func__);
-+ goto exit_node_match;
-+ }
-+
-+ node_match->id = id;
-+ node_match->cur_rule = -1;
-+ node_match->num_rules = 0;
-+ node_match->data = data;
-+ list_add_tail(&node_match->link, &node_list);
-+ INIT_LIST_HEAD(&node_match->node_rules);
-+ RAW_INIT_NOTIFIER_HEAD(&node_match->rule_notify_list);
-+ pr_debug("Added new node %d to list\n", id);
-+ }
-+exit_node_match:
-+ return node_match;
-+}
-+
-+static bool do_compare_op(u64 op1, u64 op2, int op)
-+{
-+ bool ret = false;
-+
-+ switch (op) {
-+ case OP_LE:
-+ ret = LE(op1, op2);
-+ break;
-+ case OP_LT:
-+ ret = LT(op1, op2);
-+ break;
-+ case OP_GT:
-+ ret = GT(op1, op2);
-+ break;
-+ case OP_GE:
-+ ret = GE(op1, op2);
-+ break;
-+ case OP_NOOP:
-+ ret = true;
-+ break;
-+ default:
-+ pr_info("Invalid OP %d", op);
-+ break;
-+ }
-+ return ret;
-+}
-+
-+static void update_src_id_vote(struct rule_update_path_info *inp_node,
-+ struct rule_node_info *rule_node)
-+{
-+ struct rules_def *rule;
-+ int i;
-+
-+ list_for_each_entry(rule, &rule_node->node_rules, link) {
-+ for (i = 0; i < rule->num_src; i++) {
-+ if (rule->src_info[i].id == inp_node->id) {
-+ rule->src_info[i].ib = inp_node->ib;
-+ rule->src_info[i].ab = inp_node->ab;
-+ rule->src_info[i].clk = inp_node->clk;
-+ }
-+ }
-+ }
-+}
-+
-+static u64 get_field(struct rules_def *rule, int src_id)
-+{
-+ u64 field = 0;
-+ int i;
-+
-+ for (i = 0; i < rule->num_src; i++) {
-+ switch (rule->rule_ops.src_field) {
-+ case FLD_IB:
-+ field += rule->src_info[i].ib;
-+ break;
-+ case FLD_AB:
-+ field += rule->src_info[i].ab;
-+ break;
-+ case FLD_CLK:
-+ field += rule->src_info[i].clk;
-+ break;
-+ }
-+ }
-+
-+ return field;
-+}
-+
-+static bool check_rule(struct rules_def *rule,
-+ struct rule_update_path_info *inp)
-+{
-+ bool ret = false;
-+
-+ if (!rule)
-+ return ret;
-+
-+ switch (rule->rule_ops.op) {
-+ case OP_LE:
-+ case OP_LT:
-+ case OP_GT:
-+ case OP_GE:
-+ {
-+ u64 src_field = get_field(rule, inp->id);
-+ if (!src_field)
-+ ret = false;
-+ else
-+ ret = do_compare_op(src_field, rule->rule_ops.thresh,
-+ rule->rule_ops.op);
-+ break;
-+ }
-+ default:
-+ pr_err("Unsupported op %d", rule->rule_ops.op);
-+ break;
-+ }
-+ return ret;
-+}
-+
-+static void match_rule(struct rule_update_path_info *inp_node,
-+ struct rule_node_info *node)
-+{
-+ struct rules_def *rule;
-+ int i;
-+
-+ list_for_each_entry(rule, &node->node_rules, link) {
-+ for (i = 0; i < rule->num_src; i++) {
-+ if (rule->src_info[i].id == inp_node->id) {
-+ if (check_rule(rule, inp_node)) {
-+ trace_bus_rules_matches(node->cur_rule,
-+ inp_node->id, inp_node->ab,
-+ inp_node->ib, inp_node->clk);
-+ if (rule->state ==
-+ RULE_STATE_NOT_APPLIED)
-+ rule->state_change = true;
-+ rule->state = RULE_STATE_APPLIED;
-+ } else {
-+ if (rule->state ==
-+ RULE_STATE_APPLIED)
-+ rule->state_change = true;
-+ rule->state = RULE_STATE_NOT_APPLIED;
-+ }
-+ }
-+ }
-+ }
-+}
-+
-+static void apply_rule(struct rule_node_info *node,
-+ struct list_head *output_list)
-+{
-+ struct rules_def *rule;
-+
-+ node->cur_rule = -1;
-+ list_for_each_entry(rule, &node->node_rules, link) {
-+ if ((rule->state == RULE_STATE_APPLIED) &&
-+ (node->cur_rule == -1))
-+ node->cur_rule = rule->rule_id;
-+
-+ if (node->id == NB_ID) {
-+ if (rule->state_change) {
-+ rule->state_change = false;
-+ raw_notifier_call_chain(&node->rule_notify_list,
-+ rule->state, (void *)&rule->rule_ops);
-+ }
-+ } else {
-+ if ((rule->state == RULE_STATE_APPLIED) &&
-+ (node->cur_rule == rule->rule_id)) {
-+ node->apply.id = rule->rule_ops.dst_node[0];
-+ node->apply.throttle = rule->rule_ops.mode;
-+ node->apply.lim_bw = rule->rule_ops.dst_bw;
-+ list_add_tail(&node->apply.link, output_list);
-+ }
-+ rule->state_change = false;
-+ }
-+ }
-+
-+}
-+
-+int msm_rules_update_path(struct list_head *input_list,
-+ struct list_head *output_list)
-+{
-+ int ret = 0;
-+ struct rule_update_path_info *inp_node;
-+ struct rule_node_info *node_it = NULL;
-+
-+ mutex_lock(&msm_bus_rules_lock);
-+ list_for_each_entry(inp_node, input_list, link) {
-+ list_for_each_entry(node_it, &node_list, link) {
-+ update_src_id_vote(inp_node, node_it);
-+ match_rule(inp_node, node_it);
-+ }
-+ }
-+
-+ list_for_each_entry(node_it, &node_list, link)
-+ apply_rule(node_it, output_list);
-+
-+ mutex_unlock(&msm_bus_rules_lock);
-+ return ret;
-+}
-+
-+static bool ops_equal(int op1, int op2)
-+{
-+ bool ret = false;
-+
-+ switch (op1) {
-+ case OP_GT:
-+ case OP_GE:
-+ case OP_LT:
-+ case OP_LE:
-+ if (abs(op1 - op2) <= 1)
-+ ret = true;
-+ break;
-+ default:
-+ ret = (op1 == op2);
-+ }
-+
-+ return ret;
-+}
-+
-+static int node_rules_compare(void *priv, struct list_head *a,
-+ struct list_head *b)
-+{
-+ struct rules_def *ra = container_of(a, struct rules_def, link);
-+ struct rules_def *rb = container_of(b, struct rules_def, link);
-+ int ret = -1;
-+ int64_t th_diff = 0;
-+
-+
-+ if (ra->rule_ops.mode == rb->rule_ops.mode) {
-+ if (ops_equal(ra->rule_ops.op, rb->rule_ops.op)) {
-+ if ((ra->rule_ops.op == OP_LT) ||
-+ (ra->rule_ops.op == OP_LE)) {
-+ th_diff = ra->rule_ops.thresh -
-+ rb->rule_ops.thresh;
-+ if (th_diff > 0)
-+ ret = 1;
-+ else
-+ ret = -1;
-+ } else if ((ra->rule_ops.op == OP_GT) ||
-+ (ra->rule_ops.op == OP_GE)) {
-+ th_diff = rb->rule_ops.thresh -
-+ ra->rule_ops.thresh;
-+ if (th_diff > 0)
-+ ret = 1;
-+ else
-+ ret = -1;
-+ }
-+ } else
-+ ret = ra->rule_ops.op - rb->rule_ops.op;
-+ } else if ((ra->rule_ops.mode == THROTTLE_OFF) &&
-+ (rb->rule_ops.mode == THROTTLE_ON)) {
-+ ret = 1;
-+ } else if ((ra->rule_ops.mode == THROTTLE_ON) &&
-+ (rb->rule_ops.mode == THROTTLE_OFF)) {
-+ ret = -1;
-+ }
-+
-+ return ret;
-+}
-+
-+static void print_rules(struct rule_node_info *node_it)
-+{
-+ struct rules_def *node_rule = NULL;
-+ int i;
-+
-+ if (!node_it) {
-+ pr_err("%s: no node for found", __func__);
-+ return;
-+ }
-+
-+ pr_info("\n Now printing rules for Node %d cur rule %d\n",
-+ node_it->id, node_it->cur_rule);
-+ list_for_each_entry(node_rule, &node_it->node_rules, link) {
-+ pr_info("\n num Rules %d rule Id %d\n",
-+ node_it->num_rules, node_rule->rule_id);
-+ pr_info("Rule: src_field %d\n", node_rule->rule_ops.src_field);
-+ for (i = 0; i < node_rule->rule_ops.num_src; i++)
-+ pr_info("Rule: src %d\n",
-+ node_rule->rule_ops.src_id[i]);
-+ for (i = 0; i < node_rule->rule_ops.num_dst; i++)
-+ pr_info("Rule: dst %d dst_bw %llu\n",
-+ node_rule->rule_ops.dst_node[i],
-+ node_rule->rule_ops.dst_bw);
-+ pr_info("Rule: thresh %llu op %d mode %d State %d\n",
-+ node_rule->rule_ops.thresh,
-+ node_rule->rule_ops.op,
-+ node_rule->rule_ops.mode,
-+ node_rule->state);
-+ }
-+}
-+
-+void print_all_rules(void)
-+{
-+ struct rule_node_info *node_it = NULL;
-+
-+ list_for_each_entry(node_it, &node_list, link)
-+ print_rules(node_it);
-+}
-+
-+void print_rules_buf(char *buf, int max_buf)
-+{
-+ struct rule_node_info *node_it = NULL;
-+ struct rules_def *node_rule = NULL;
-+ int i;
-+ int cnt = 0;
-+
-+ list_for_each_entry(node_it, &node_list, link) {
-+ cnt += scnprintf(buf + cnt, max_buf - cnt,
-+ "\n Now printing rules for Node %d cur_rule %d\n",
-+ node_it->id, node_it->cur_rule);
-+ list_for_each_entry(node_rule, &node_it->node_rules, link) {
-+ cnt += scnprintf(buf + cnt, max_buf - cnt,
-+ "\nNum Rules:%d ruleId %d STATE:%d change:%d\n",
-+ node_it->num_rules, node_rule->rule_id,
-+ node_rule->state, node_rule->state_change);
-+ cnt += scnprintf(buf + cnt, max_buf - cnt,
-+ "Src_field %d\n",
-+ node_rule->rule_ops.src_field);
-+ for (i = 0; i < node_rule->rule_ops.num_src; i++)
-+ cnt += scnprintf(buf + cnt, max_buf - cnt,
-+ "Src %d Cur Ib %llu Ab %llu\n",
-+ node_rule->rule_ops.src_id[i],
-+ node_rule->src_info[i].ib,
-+ node_rule->src_info[i].ab);
-+ for (i = 0; i < node_rule->rule_ops.num_dst; i++)
-+ cnt += scnprintf(buf + cnt, max_buf - cnt,
-+ "Dst %d dst_bw %llu\n",
-+ node_rule->rule_ops.dst_node[0],
-+ node_rule->rule_ops.dst_bw);
-+ cnt += scnprintf(buf + cnt, max_buf - cnt,
-+ "Thresh %llu op %d mode %d\n",
-+ node_rule->rule_ops.thresh,
-+ node_rule->rule_ops.op,
-+ node_rule->rule_ops.mode);
-+ }
-+ }
-+}
-+
-+static int copy_rule(struct bus_rule_type *src, struct rules_def *node_rule,
-+ struct notifier_block *nb)
-+{
-+ int i;
-+ int ret = 0;
-+
-+ memcpy(&node_rule->rule_ops, src,
-+ sizeof(struct bus_rule_type));
-+ node_rule->rule_ops.src_id = kzalloc(
-+ (sizeof(int) * node_rule->rule_ops.num_src),
-+ GFP_KERNEL);
-+ if (!node_rule->rule_ops.src_id) {
-+ pr_err("%s:Failed to allocate for src_id",
-+ __func__);
-+ return -ENOMEM;
-+ }
-+ memcpy(node_rule->rule_ops.src_id, src->src_id,
-+ sizeof(int) * src->num_src);
-+
-+
-+ if (!nb) {
-+ node_rule->rule_ops.dst_node = kzalloc(
-+ (sizeof(int) * node_rule->rule_ops.num_dst),
-+ GFP_KERNEL);
-+ if (!node_rule->rule_ops.dst_node) {
-+ pr_err("%s:Failed to allocate for src_id",
-+ __func__);
-+ return -ENOMEM;
-+ }
-+ memcpy(node_rule->rule_ops.dst_node, src->dst_node,
-+ sizeof(int) * src->num_dst);
-+ }
-+
-+ node_rule->num_src = src->num_src;
-+ node_rule->src_info = kzalloc(
-+ (sizeof(struct node_vote_info) * node_rule->rule_ops.num_src),
-+ GFP_KERNEL);
-+ if (!node_rule->src_info) {
-+ pr_err("%s:Failed to allocate for src_id",
-+ __func__);
-+ return -ENOMEM;
-+ }
-+ for (i = 0; i < src->num_src; i++)
-+ node_rule->src_info[i].id = src->src_id[i];
-+
-+ return ret;
-+}
-+
-+void msm_rule_register(int num_rules, struct bus_rule_type *rule,
-+ struct notifier_block *nb)
-+{
-+ struct rule_node_info *node = NULL;
-+ int i, j;
-+ struct rules_def *node_rule = NULL;
-+ int num_dst = 0;
-+
-+ if (!rule)
-+ return;
-+
-+ mutex_lock(&msm_bus_rules_lock);
-+ for (i = 0; i < num_rules; i++) {
-+ if (nb)
-+ num_dst = 1;
-+ else
-+ num_dst = rule[i].num_dst;
-+
-+ for (j = 0; j < num_dst; j++) {
-+ int id = 0;
-+
-+ if (nb)
-+ id = NB_ID;
-+ else
-+ id = rule[i].dst_node[j];
-+
-+ node = gen_node(id, nb);
-+ if (!node) {
-+ pr_info("Error getting rule");
-+ goto exit_rule_register;
-+ }
-+ node_rule = kzalloc(sizeof(struct rules_def),
-+ GFP_KERNEL);
-+ if (!node_rule) {
-+ pr_err("%s: Failed to allocate for rule",
-+ __func__);
-+ goto exit_rule_register;
-+ }
-+
-+ if (copy_rule(&rule[i], node_rule, nb)) {
-+ pr_err("Error copying rule");
-+ goto exit_rule_register;
-+ }
-+
-+ node_rule->rule_id = node->num_rules++;
-+ if (nb)
-+ node->data = nb;
-+
-+ list_add_tail(&node_rule->link, &node->node_rules);
-+ }
-+ }
-+ list_sort(NULL, &node->node_rules, node_rules_compare);
-+
-+ if (nb)
-+ raw_notifier_chain_register(&node->rule_notify_list, nb);
-+exit_rule_register:
-+ mutex_unlock(&msm_bus_rules_lock);
-+ return;
-+}
-+
-+static int comp_rules(struct bus_rule_type *rulea, struct bus_rule_type *ruleb)
-+{
-+ int ret = 1;
-+
-+ if (rulea->num_src == ruleb->num_src)
-+ ret = memcmp(rulea->src_id, ruleb->src_id,
-+ (sizeof(int) * rulea->num_src));
-+ if (!ret && (rulea->num_dst == ruleb->num_dst))
-+ ret = memcmp(rulea->dst_node, ruleb->dst_node,
-+ (sizeof(int) * rulea->num_dst));
-+ if (!ret && (rulea->dst_bw == ruleb->dst_bw) &&
-+ (rulea->op == ruleb->op) && (rulea->thresh == ruleb->thresh))
-+ ret = 0;
-+
-+ return ret;
-+}
-+
-+void msm_rule_unregister(int num_rules, struct bus_rule_type *rule,
-+ struct notifier_block *nb)
-+{
-+ int i;
-+ struct rule_node_info *node = NULL;
-+ struct rule_node_info *node_tmp = NULL;
-+ struct rules_def *node_rule;
-+ struct rules_def *node_rule_tmp;
-+ bool match_found = false;
-+
-+ if (!rule)
-+ return;
-+
-+ mutex_lock(&msm_bus_rules_lock);
-+ if (nb) {
-+ node = get_node(NB_ID, nb);
-+ if (!node) {
-+ pr_err("%s: Can't find node", __func__);
-+ goto exit_unregister_rule;
-+ }
-+
-+ list_for_each_entry_safe(node_rule, node_rule_tmp,
-+ &node->node_rules, link) {
-+ list_del(&node_rule->link);
-+ kfree(node_rule);
-+ node->num_rules--;
-+ }
-+ raw_notifier_chain_unregister(&node->rule_notify_list, nb);
-+ } else {
-+ for (i = 0; i < num_rules; i++) {
-+ match_found = false;
-+
-+ list_for_each_entry(node, &node_list, link) {
-+ list_for_each_entry_safe(node_rule,
-+ node_rule_tmp, &node->node_rules, link) {
-+ if (comp_rules(&node_rule->rule_ops,
-+ &rule[i]) == 0) {
-+ list_del(&node_rule->link);
-+ kfree(node_rule);
-+ match_found = true;
-+ node->num_rules--;
-+ list_sort(NULL,
-+ &node->node_rules,
-+ node_rules_compare);
-+ break;
-+ }
-+ }
-+ }
-+ }
-+ }
-+
-+ list_for_each_entry_safe(node, node_tmp,
-+ &node_list, link) {
-+ if (!node->num_rules) {
-+ pr_debug("Deleting Rule node %d", node->id);
-+ list_del(&node->link);
-+ kfree(node);
-+ }
-+ }
-+exit_unregister_rule:
-+ mutex_unlock(&msm_bus_rules_lock);
-+}
-+
-+bool msm_rule_are_rules_registered(void)
-+{
-+ bool ret = false;
-+
-+ if (list_empty(&node_list))
-+ ret = false;
-+ else
-+ ret = true;
-+
-+ return ret;
-+}
-+
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_bus_rules.h
-@@ -0,0 +1,77 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#ifndef _ARCH_ARM_MACH_MSM_BUS_RULES_H
-+#define _ARCH_ARM_MACH_MSM_BUS_RULES_H
-+
-+#include <linux/types.h>
-+#include <linux/list.h>
-+#include <linux/notifier.h>
-+#include <dt-bindings/msm/msm-bus-rule-ops.h>
-+
-+#define MAX_NODES (5)
-+
-+struct rule_update_path_info {
-+ u32 id;
-+ u64 ab;
-+ u64 ib;
-+ u64 clk;
-+ struct list_head link;
-+};
-+
-+struct rule_apply_rcm_info {
-+ u32 id;
-+ u64 lim_bw;
-+ int throttle;
-+ bool after_clk_commit;
-+ struct list_head link;
-+};
-+
-+struct bus_rule_type {
-+ int num_src;
-+ int *src_id;
-+ int src_field;
-+ int op;
-+ u64 thresh;
-+ int num_dst;
-+ int *dst_node;
-+ u64 dst_bw;
-+ int mode;
-+ void *client_data;
-+};
-+
-+#if (defined(CONFIG_BUS_TOPOLOGY_ADHOC))
-+void msm_rule_register(int num_rules, struct bus_rule_type *rule,
-+ struct notifier_block *nb);
-+void msm_rule_unregister(int num_rules, struct bus_rule_type *rule,
-+ struct notifier_block *nb);
-+void print_rules_buf(char *buf, int count);
-+bool msm_rule_are_rules_registered(void);
-+#else
-+static inline void msm_rule_register(int num_rules, struct bus_rule_type *rule,
-+ struct notifier_block *nb)
-+{
-+}
-+static inline void msm_rule_unregister(int num_rules,
-+ struct bus_rule_type *rule,
-+ struct notifier_block *nb)
-+{
-+}
-+static inline void print_rules_buf(char *buf, int count)
-+{
-+}
-+static inline bool msm_rule_are_rules_registered(void)
-+{
-+ return false;
-+}
-+#endif /* defined(CONFIG_BUS_TOPOLOGY_ADHOC) */
-+#endif /* _ARCH_ARM_MACH_MSM_BUS_RULES_H */
---- /dev/null
-+++ b/drivers/bus/msm_bus/msm_buspm_coresight_adhoc.c
-@@ -0,0 +1,189 @@
-+/* Copyright (c) 2014 The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/device.h>
-+#include <linux/platform_device.h>
-+#include <linux/err.h>
-+#include <linux/slab.h>
-+#include <linux/errno.h>
-+#include <linux/uaccess.h>
-+#include <linux/miscdevice.h>
-+#include <linux/of_coresight.h>
-+#include <linux/coresight.h>
-+#include <linux/io.h>
-+#include <linux/of.h>
-+#include <linux/list.h>
-+
-+struct msmbus_coresight_adhoc_clock_drvdata {
-+ int id;
-+ struct clk *clk;
-+ struct list_head list;
-+};
-+
-+struct msmbus_coresight_adhoc_drvdata {
-+ struct device *dev;
-+ struct coresight_device *csdev;
-+ struct coresight_desc *desc;
-+ struct list_head clocks;
-+};
-+
-+static int msmbus_coresight_enable_adhoc(struct coresight_device *csdev)
-+{
-+ struct msmbus_coresight_adhoc_clock_drvdata *clk;
-+ struct msmbus_coresight_adhoc_drvdata *drvdata =
-+ dev_get_drvdata(csdev->dev.parent);
-+ long rate;
-+
-+ list_for_each_entry(clk, &drvdata->clocks, list) {
-+ if (clk->id == csdev->id) {
-+ rate = clk_round_rate(clk->clk, 1L);
-+ clk_set_rate(clk->clk, rate);
-+ return clk_prepare_enable(clk->clk);
-+ }
-+ }
-+
-+ return -ENOENT;
-+}
-+
-+static void msmbus_coresight_disable_adhoc(struct coresight_device *csdev)
-+{
-+ struct msmbus_coresight_adhoc_clock_drvdata *clk;
-+ struct msmbus_coresight_adhoc_drvdata *drvdata =
-+ dev_get_drvdata(csdev->dev.parent);
-+
-+ list_for_each_entry(clk, &drvdata->clocks, list) {
-+ if (clk->id == csdev->id)
-+ clk_disable_unprepare(clk->clk);
-+ }
-+}
-+
-+static const struct coresight_ops_source msmbus_coresight_adhoc_source_ops = {
-+ .enable = msmbus_coresight_enable_adhoc,
-+ .disable = msmbus_coresight_disable_adhoc,
-+};
-+
-+static const struct coresight_ops msmbus_coresight_cs_ops = {
-+ .source_ops = &msmbus_coresight_adhoc_source_ops,
-+};
-+
-+void msmbus_coresight_remove_adhoc(struct platform_device *pdev)
-+{
-+ struct msmbus_coresight_adhoc_clock_drvdata *clk, *next_clk;
-+ struct msmbus_coresight_adhoc_drvdata *drvdata =
-+ platform_get_drvdata(pdev);
-+
-+ msmbus_coresight_disable_adhoc(drvdata->csdev);
-+ coresight_unregister(drvdata->csdev);
-+ list_for_each_entry_safe(clk, next_clk, &drvdata->clocks, list) {
-+ list_del(&clk->list);
-+ devm_kfree(&pdev->dev, clk);
-+ }
-+ devm_kfree(&pdev->dev, drvdata->desc);
-+ devm_kfree(&pdev->dev, drvdata);
-+ platform_set_drvdata(pdev, NULL);
-+}
-+EXPORT_SYMBOL(msmbus_coresight_remove_adhoc);
-+
-+static int buspm_of_get_clk_adhoc(struct device_node *of_node,
-+ struct msmbus_coresight_adhoc_drvdata *drvdata, int id)
-+{
-+ struct msmbus_coresight_adhoc_clock_drvdata *clk;
-+ clk = devm_kzalloc(drvdata->dev, sizeof(*clk), GFP_KERNEL);
-+
-+ if (!clk)
-+ return -ENOMEM;
-+
-+ clk->id = id;
-+
-+ clk->clk = of_clk_get_by_name(of_node, "bus_clk");
-+ if (IS_ERR(clk->clk)) {
-+ pr_err("Error: unable to get clock for coresight node %d\n",
-+ id);
-+ goto err;
-+ }
-+
-+ list_add(&clk->list, &drvdata->clocks);
-+ return 0;
-+
-+err:
-+ devm_kfree(drvdata->dev, clk);
-+ return -EINVAL;
-+}
-+
-+int msmbus_coresight_init_adhoc(struct platform_device *pdev,
-+ struct device_node *of_node)
-+{
-+ int ret;
-+ struct device *dev = &pdev->dev;
-+ struct coresight_platform_data *pdata;
-+ struct msmbus_coresight_adhoc_drvdata *drvdata;
-+ struct coresight_desc *desc;
-+
-+ pdata = of_get_coresight_platform_data(dev, of_node);
-+ if (IS_ERR(pdata))
-+ return PTR_ERR(pdata);
-+
-+ drvdata = platform_get_drvdata(pdev);
-+ if (IS_ERR_OR_NULL(drvdata)) {
-+ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
-+ if (!drvdata) {
-+ pr_err("coresight: Alloc for drvdata failed\n");
-+ return -ENOMEM;
-+ }
-+ INIT_LIST_HEAD(&drvdata->clocks);
-+ drvdata->dev = &pdev->dev;
-+ platform_set_drvdata(pdev, drvdata);
-+ }
-+ ret = buspm_of_get_clk_adhoc(of_node, drvdata, pdata->id);
-+ if (ret) {
-+ pr_err("Error getting clocks\n");
-+ ret = -ENXIO;
-+ goto err1;
-+ }
-+
-+ desc = devm_kzalloc(dev, sizeof(*desc), GFP_KERNEL);
-+ if (!desc) {
-+ pr_err("coresight: Error allocating memory\n");
-+ ret = -ENOMEM;
-+ goto err1;
-+ }
-+
-+ desc->type = CORESIGHT_DEV_TYPE_SOURCE;
-+ desc->subtype.source_subtype = CORESIGHT_DEV_SUBTYPE_SOURCE_BUS;
-+ desc->ops = &msmbus_coresight_cs_ops;
-+ desc->pdata = pdata;
-+ desc->dev = &pdev->dev;
-+ desc->owner = THIS_MODULE;
-+ drvdata->desc = desc;
-+ drvdata->csdev = coresight_register(desc);
-+ if (IS_ERR(drvdata->csdev)) {
-+ pr_err("coresight: Coresight register failed\n");
-+ ret = PTR_ERR(drvdata->csdev);
-+ goto err0;
-+ }
-+
-+ dev_info(dev, "msmbus_coresight initialized\n");
-+
-+ return 0;
-+err0:
-+ devm_kfree(dev, desc);
-+err1:
-+ devm_kfree(dev, drvdata);
-+ platform_set_drvdata(pdev, NULL);
-+ return ret;
-+}
-+EXPORT_SYMBOL(msmbus_coresight_init_adhoc);
-+
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("MSM BusPM Adhoc CoreSight Driver");
---- /dev/null
-+++ b/drivers/bus/msm_bus/rpm-smd.h
-@@ -0,0 +1,268 @@
-+/* Copyright (c) 2012, 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ */
-+
-+#ifndef __ARCH_ARM_MACH_MSM_RPM_SMD_H
-+#define __ARCH_ARM_MACH_MSM_RPM_SMD_H
-+
-+/**
-+ * enum msm_rpm_set - RPM enumerations for sleep/active set
-+ * %MSM_RPM_CTX_SET_0: Set resource parameters for active mode.
-+ * %MSM_RPM_CTX_SET_SLEEP: Set resource parameters for sleep.
-+ */
-+enum msm_rpm_set {
-+ MSM_RPM_CTX_ACTIVE_SET,
-+ MSM_RPM_CTX_SLEEP_SET,
-+};
-+
-+struct msm_rpm_request;
-+
-+struct msm_rpm_kvp {
-+ uint32_t key;
-+ uint32_t length;
-+ uint8_t *data;
-+};
-+#ifdef CONFIG_MSM_RPM_SMD
-+/**
-+ * msm_rpm_request() - Creates a parent element to identify the
-+ * resource on the RPM, that stores the KVPs for different fields modified
-+ * for a hardware resource
-+ *
-+ * @set: if the device is setting the active/sleep set parameter
-+ * for the resource
-+ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource
-+ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type
-+ * @num_elements: number of KVPs pairs associated with the resource
-+ *
-+ * returns pointer to a msm_rpm_request on success, NULL on error
-+ */
-+struct msm_rpm_request *msm_rpm_create_request(
-+ enum msm_rpm_set set, uint32_t rsc_type,
-+ uint32_t rsc_id, int num_elements);
-+
-+/**
-+ * msm_rpm_request_noirq() - Creates a parent element to identify the
-+ * resource on the RPM, that stores the KVPs for different fields modified
-+ * for a hardware resource. This function is similar to msm_rpm_create_request
-+ * except that it has to be called with interrupts masked.
-+ *
-+ * @set: if the device is setting the active/sleep set parameter
-+ * for the resource
-+ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource
-+ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type
-+ * @num_elements: number of KVPs pairs associated with the resource
-+ *
-+ * returns pointer to a msm_rpm_request on success, NULL on error
-+ */
-+struct msm_rpm_request *msm_rpm_create_request_noirq(
-+ enum msm_rpm_set set, uint32_t rsc_type,
-+ uint32_t rsc_id, int num_elements);
-+
-+/**
-+ * msm_rpm_add_kvp_data() - Adds a Key value pair to a existing RPM resource.
-+ *
-+ * @handle: RPM resource handle to which the data should be appended
-+ * @key: unsigned integer identify the parameter modified
-+ * @data: byte array that contains the value corresponding to key.
-+ * @size: size of data in bytes.
-+ *
-+ * returns 0 on success or errno
-+ */
-+int msm_rpm_add_kvp_data(struct msm_rpm_request *handle,
-+ uint32_t key, const uint8_t *data, int size);
-+
-+/**
-+ * msm_rpm_add_kvp_data_noirq() - Adds a Key value pair to a existing RPM
-+ * resource. This function is similar to msm_rpm_add_kvp_data except that it
-+ * has to be called with interrupts masked.
-+ *
-+ * @handle: RPM resource handle to which the data should be appended
-+ * @key: unsigned integer identify the parameter modified
-+ * @data: byte array that contains the value corresponding to key.
-+ * @size: size of data in bytes.
-+ *
-+ * returns 0 on success or errno
-+ */
-+int msm_rpm_add_kvp_data_noirq(struct msm_rpm_request *handle,
-+ uint32_t key, const uint8_t *data, int size);
-+
-+/** msm_rpm_free_request() - clean up the RPM request handle created with
-+ * msm_rpm_create_request
-+ *
-+ * @handle: RPM resource handle to be cleared.
-+ */
-+
-+void msm_rpm_free_request(struct msm_rpm_request *handle);
-+
-+/**
-+ * msm_rpm_send_request() - Send the RPM messages using SMD. The function
-+ * assigns a message id before sending the data out to the RPM. RPM hardware
-+ * uses the message id to acknowledge the messages.
-+ *
-+ * @handle: pointer to the msm_rpm_request for the resource being modified.
-+ *
-+ * returns non-zero message id on success and zero on a failed transaction.
-+ * The drivers use message id to wait for ACK from RPM.
-+ */
-+int msm_rpm_send_request(struct msm_rpm_request *handle);
-+
-+/**
-+ * msm_rpm_send_request_noirq() - Send the RPM messages using SMD. The
-+ * function assigns a message id before sending the data out to the RPM.
-+ * RPM hardware uses the message id to acknowledge the messages. This function
-+ * is similar to msm_rpm_send_request except that it has to be called with
-+ * interrupts masked.
-+ *
-+ * @handle: pointer to the msm_rpm_request for the resource being modified.
-+ *
-+ * returns non-zero message id on success and zero on a failed transaction.
-+ * The drivers use message id to wait for ACK from RPM.
-+ */
-+int msm_rpm_send_request_noirq(struct msm_rpm_request *handle);
-+
-+/**
-+ * msm_rpm_wait_for_ack() - A blocking call that waits for acknowledgment of
-+ * a message from RPM.
-+ *
-+ * @msg_id: the return from msm_rpm_send_requests
-+ *
-+ * returns 0 on success or errno
-+ */
-+int msm_rpm_wait_for_ack(uint32_t msg_id);
-+
-+/**
-+ * msm_rpm_wait_for_ack_noirq() - A blocking call that waits for acknowledgment
-+ * of a message from RPM. This function is similar to msm_rpm_wait_for_ack
-+ * except that it has to be called with interrupts masked.
-+ *
-+ * @msg_id: the return from msm_rpm_send_request
-+ *
-+ * returns 0 on success or errno
-+ */
-+int msm_rpm_wait_for_ack_noirq(uint32_t msg_id);
-+
-+/**
-+ * msm_rpm_send_message() -Wrapper function for clients to send data given an
-+ * array of key value pairs.
-+ *
-+ * @set: if the device is setting the active/sleep set parameter
-+ * for the resource
-+ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource
-+ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type
-+ * @kvp: array of KVP data.
-+ * @nelem: number of KVPs pairs associated with the message.
-+ *
-+ * returns 0 on success and errno on failure.
-+ */
-+int msm_rpm_send_message(enum msm_rpm_set set, uint32_t rsc_type,
-+ uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems);
-+
-+/**
-+ * msm_rpm_send_message_noirq() -Wrapper function for clients to send data
-+ * given an array of key value pairs. This function is similar to the
-+ * msm_rpm_send_message() except that it has to be called with interrupts
-+ * disabled. Clients should choose the irq version when possible for system
-+ * performance.
-+ *
-+ * @set: if the device is setting the active/sleep set parameter
-+ * for the resource
-+ * @rsc_type: unsigned 32 bit integer that identifies the type of the resource
-+ * @rsc_id: unsigned 32 bit that uniquely identifies a resource within a type
-+ * @kvp: array of KVP data.
-+ * @nelem: number of KVPs pairs associated with the message.
-+ *
-+ * returns 0 on success and errno on failure.
-+ */
-+int msm_rpm_send_message_noirq(enum msm_rpm_set set, uint32_t rsc_type,
-+ uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems);
-+
-+/**
-+ * msm_rpm_driver_init() - Initialization function that registers for a
-+ * rpm platform driver.
-+ *
-+ * returns 0 on success.
-+ */
-+int __init msm_rpm_driver_init(void);
-+
-+#else
-+
-+static inline struct msm_rpm_request *msm_rpm_create_request(
-+ enum msm_rpm_set set, uint32_t rsc_type,
-+ uint32_t rsc_id, int num_elements)
-+{
-+ return NULL;
-+}
-+
-+static inline struct msm_rpm_request *msm_rpm_create_request_noirq(
-+ enum msm_rpm_set set, uint32_t rsc_type,
-+ uint32_t rsc_id, int num_elements)
-+{
-+ return NULL;
-+
-+}
-+static inline uint32_t msm_rpm_add_kvp_data(struct msm_rpm_request *handle,
-+ uint32_t key, const uint8_t *data, int count)
-+{
-+ return 0;
-+}
-+static inline uint32_t msm_rpm_add_kvp_data_noirq(
-+ struct msm_rpm_request *handle, uint32_t key,
-+ const uint8_t *data, int count)
-+{
-+ return 0;
-+}
-+
-+static inline void msm_rpm_free_request(struct msm_rpm_request *handle)
-+{
-+ return;
-+}
-+
-+static inline int msm_rpm_send_request(struct msm_rpm_request *handle)
-+{
-+ return 0;
-+}
-+
-+static inline int msm_rpm_send_request_noirq(struct msm_rpm_request *handle)
-+{
-+ return 0;
-+
-+}
-+
-+static inline int msm_rpm_send_message(enum msm_rpm_set set, uint32_t rsc_type,
-+ uint32_t rsc_id, struct msm_rpm_kvp *kvp, int nelems)
-+{
-+ return 0;
-+}
-+
-+static inline int msm_rpm_send_message_noirq(enum msm_rpm_set set,
-+ uint32_t rsc_type, uint32_t rsc_id, struct msm_rpm_kvp *kvp,
-+ int nelems)
-+{
-+ return 0;
-+}
-+
-+static inline int msm_rpm_wait_for_ack(uint32_t msg_id)
-+{
-+ return 0;
-+
-+}
-+static inline int msm_rpm_wait_for_ack_noirq(uint32_t msg_id)
-+{
-+ return 0;
-+}
-+
-+static inline int __init msm_rpm_driver_init(void)
-+{
-+ return 0;
-+}
-+#endif
-+#endif /*__ARCH_ARM_MACH_MSM_RPM_SMD_H*/
---- /dev/null
-+++ b/include/trace/events/trace_msm_bus.h
-@@ -0,0 +1,163 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#undef TRACE_SYSTEM
-+#define TRACE_SYSTEM msm_bus
-+
-+#if !defined(_TRACE_MSM_BUS_H) || defined(TRACE_HEADER_MULTI_READ)
-+#define _TRACE_MSM_BUS_H
-+
-+#include <linux/tracepoint.h>
-+
-+TRACE_EVENT(bus_update_request,
-+
-+ TP_PROTO(int sec, int nsec, const char *name, unsigned int index,
-+ int src, int dest, unsigned long long ab,
-+ unsigned long long ib),
-+
-+ TP_ARGS(sec, nsec, name, index, src, dest, ab, ib),
-+
-+ TP_STRUCT__entry(
-+ __field(int, sec)
-+ __field(int, nsec)
-+ __string(name, name)
-+ __field(u32, index)
-+ __field(int, src)
-+ __field(int, dest)
-+ __field(u64, ab)
-+ __field(u64, ib)
-+ ),
-+
-+ TP_fast_assign(
-+ __entry->sec = sec;
-+ __entry->nsec = nsec;
-+ __assign_str(name, name);
-+ __entry->index = index;
-+ __entry->src = src;
-+ __entry->dest = dest;
-+ __entry->ab = ab;
-+ __entry->ib = ib;
-+ ),
-+
-+ TP_printk("time= %d.%d name=%s index=%u src=%d dest=%d ab=%llu ib=%llu",
-+ __entry->sec,
-+ __entry->nsec,
-+ __get_str(name),
-+ (unsigned int)__entry->index,
-+ __entry->src,
-+ __entry->dest,
-+ (unsigned long long)__entry->ab,
-+ (unsigned long long)__entry->ib)
-+);
-+
-+TRACE_EVENT(bus_bimc_config_limiter,
-+
-+ TP_PROTO(int mas_id, unsigned long long cur_lim_bw),
-+
-+ TP_ARGS(mas_id, cur_lim_bw),
-+
-+ TP_STRUCT__entry(
-+ __field(int, mas_id)
-+ __field(u64, cur_lim_bw)
-+ ),
-+
-+ TP_fast_assign(
-+ __entry->mas_id = mas_id;
-+ __entry->cur_lim_bw = cur_lim_bw;
-+ ),
-+
-+ TP_printk("Master=%d cur_lim_bw=%llu",
-+ __entry->mas_id,
-+ (unsigned long long)__entry->cur_lim_bw)
-+);
-+
-+TRACE_EVENT(bus_avail_bw,
-+
-+ TP_PROTO(unsigned long long cur_bimc_bw, unsigned long long cur_mdp_bw),
-+
-+ TP_ARGS(cur_bimc_bw, cur_mdp_bw),
-+
-+ TP_STRUCT__entry(
-+ __field(u64, cur_bimc_bw)
-+ __field(u64, cur_mdp_bw)
-+ ),
-+
-+ TP_fast_assign(
-+ __entry->cur_bimc_bw = cur_bimc_bw;
-+ __entry->cur_mdp_bw = cur_mdp_bw;
-+ ),
-+
-+ TP_printk("cur_bimc_bw = %llu cur_mdp_bw = %llu",
-+ (unsigned long long)__entry->cur_bimc_bw,
-+ (unsigned long long)__entry->cur_mdp_bw)
-+);
-+
-+TRACE_EVENT(bus_rules_matches,
-+
-+ TP_PROTO(int node_id, int rule_id, unsigned long long node_ab,
-+ unsigned long long node_ib, unsigned long long node_clk),
-+
-+ TP_ARGS(node_id, rule_id, node_ab, node_ib, node_clk),
-+
-+ TP_STRUCT__entry(
-+ __field(int, node_id)
-+ __field(int, rule_id)
-+ __field(u64, node_ab)
-+ __field(u64, node_ib)
-+ __field(u64, node_clk)
-+ ),
-+
-+ TP_fast_assign(
-+ __entry->node_id = node_id;
-+ __entry->rule_id = rule_id;
-+ __entry->node_ab = node_ab;
-+ __entry->node_ib = node_ib;
-+ __entry->node_clk = node_clk;
-+ ),
-+
-+ TP_printk("Rule match node%d rule%d node-ab%llu:ib%llu:clk%llu",
-+ __entry->node_id, __entry->rule_id,
-+ (unsigned long long)__entry->node_ab,
-+ (unsigned long long)__entry->node_ib,
-+ (unsigned long long)__entry->node_clk)
-+);
-+
-+TRACE_EVENT(bus_bke_params,
-+
-+ TP_PROTO(u32 gc, u32 gp, u32 thl, u32 thm, u32 thh),
-+
-+ TP_ARGS(gc, gp, thl, thm, thh),
-+
-+ TP_STRUCT__entry(
-+ __field(u32, gc)
-+ __field(u32, gp)
-+ __field(u32, thl)
-+ __field(u32, thm)
-+ __field(u32, thh)
-+ ),
-+
-+ TP_fast_assign(
-+ __entry->gc = gc;
-+ __entry->gp = gp;
-+ __entry->thl = thl;
-+ __entry->thm = thm;
-+ __entry->thh = thh;
-+ ),
-+
-+ TP_printk("BKE Params GC=0x%x GP=0x%x THL=0x%x THM=0x%x THH=0x%x",
-+ __entry->gc, __entry->gp, __entry->thl, __entry->thm,
-+ __entry->thh)
-+);
-+
-+#endif
-+#define TRACE_INCLUDE_FILE trace_msm_bus
-+#include <trace/define_trace.h>
diff --git a/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch
deleted file mode 100644
index 59e277c349..0000000000
--- a/target/linux/ipq806x/patches-4.14/850-soc-add-qualcomm-syscon.patch
+++ /dev/null
@@ -1,177 +0,0 @@
-From: Christian Lamparter <chunkeey@googlemail.com>
-Subject: SoC: add qualcomm syscon
---- a/drivers/soc/qcom/Makefile
-+++ b/drivers/soc/qcom/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_st
- obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
- obj-$(CONFIG_QCOM_SMSM) += smsm.o
- obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
-+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o
---- a/drivers/soc/qcom/Kconfig
-+++ b/drivers/soc/qcom/Kconfig
-@@ -78,6 +78,13 @@ config QCOM_SMSM
- Say yes here to support the Qualcomm Shared Memory State Machine.
- The state machine is represented by bits in shared memory.
-
-+config QCOM_TCSR
-+ tristate "QCOM Top Control and Status Registers"
-+ depends on ARCH_QCOM
-+ help
-+ Say y here to enable TCSR support. The TCSR provides control
-+ functions for various peripherals.
-+
- config QCOM_WCNSS_CTRL
- tristate "Qualcomm WCNSS control driver"
- depends on ARCH_QCOM
---- /dev/null
-+++ b/drivers/soc/qcom/qcom_tcsr.c
-@@ -0,0 +1,98 @@
-+/*
-+ * Copyright (c) 2014, The Linux foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License rev 2 and
-+ * only rev 2 as published by the free Software foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/err.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+#include <linux/platform_device.h>
-+
-+#define TCSR_USB_PORT_SEL 0xb0
-+#define TCSR_USB_HSPHY_CONFIG 0xC
-+
-+#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0
-+#define TCSR_ESS_INTERFACE_SEL_MASK 0xf
-+
-+#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0
-+#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4
-+#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4
-+
-+static int tcsr_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ const struct device_node *node = pdev->dev.of_node;
-+ void __iomem *base;
-+ u32 val;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ base = devm_ioremap_resource(&pdev->dev, res);
-+ if (IS_ERR(base))
-+ return PTR_ERR(base);
-+
-+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) {
-+ dev_err(&pdev->dev, "setting usb port select = %d\n", val);
-+ writel(val, base + TCSR_USB_PORT_SEL);
-+ }
-+
-+ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) {
-+ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val);
-+ writel(val, base + TCSR_USB_HSPHY_CONFIG);
-+ }
-+
-+ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) {
-+ u32 tmp = 0;
-+ dev_info(&pdev->dev, "setting ess interface select = %x\n", val);
-+ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET);
-+ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK);
-+ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK);
-+ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET);
-+ }
-+
-+ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) {
-+ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val);
-+ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET);
-+ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET);
-+ }
-+
-+ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) {
-+ dev_info(&pdev->dev,
-+ "setting wifi_noc_memtype_m0_m2 = %x\n", val);
-+ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2);
-+ }
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id tcsr_dt_match[] = {
-+ { .compatible = "qcom,tcsr", },
-+ { },
-+};
-+
-+MODULE_DEVICE_TABLE(of, tcsr_dt_match);
-+
-+static struct platform_driver tcsr_driver = {
-+ .driver = {
-+ .name = "tcsr",
-+ .owner = THIS_MODULE,
-+ .of_match_table = tcsr_dt_match,
-+ },
-+ .probe = tcsr_probe,
-+};
-+
-+module_platform_driver(tcsr_driver);
-+
-+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
-+MODULE_DESCRIPTION("QCOM TCSR driver");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/include/dt-bindings/soc/qcom,tcsr.h
-@@ -0,0 +1,48 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ */
-+#ifndef __DT_BINDINGS_QCOM_TCSR_H
-+#define __DT_BINDINGS_QCOM_TCSR_H
-+
-+#define TCSR_USB_SELECT_USB3_P0 0x1
-+#define TCSR_USB_SELECT_USB3_P1 0x2
-+#define TCSR_USB_SELECT_USB3_DUAL 0x3
-+
-+/* IPQ40xx HS PHY Mode Select */
-+#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7
-+#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7
-+
-+/* IPQ40xx ess interface mode select */
-+#define TCSR_ESS_PSGMII 0
-+#define TCSR_ESS_PSGMII_RGMII5 1
-+#define TCSR_ESS_PSGMII_RMII0 2
-+#define TCSR_ESS_PSGMII_RMII1 4
-+#define TCSR_ESS_PSGMII_RMII0_RMII1 6
-+#define TCSR_ESS_PSGMII_RGMII4 9
-+
-+/*
-+ * IPQ40xx WiFi Global Config
-+ * Bit 30:AXID_EN
-+ * Enable AXI master bus Axid translating to confirm all txn submitted by order
-+ * Bit 24: Use locally generated socslv_wxi_bvalid
-+ * 1: use locally generate socslv_wxi_bvalid for performance.
-+ * 0: use SNOC socslv_wxi_bvalid.
-+ */
-+#define TCSR_WIFI_GLB_CFG 0x41000000
-+
-+/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */
-+#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222
-+
-+/* TCSR A/B REG */
-+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0
-+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1
-+
-+#endif