aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorDan Brown <danbrown@gmail.com>2021-05-12 14:48:01 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-05-17 01:01:26 +0200
commit6ee3680614047f7732731ebbaac946a93ab4f693 (patch)
treef03d427b813a7953d36789300c7477a462dd5908 /target
parent8e7c9f5393e6c96a9c13da0f5b407a6912523e77 (diff)
downloadupstream-6ee3680614047f7732731ebbaac946a93ab4f693.tar.gz
upstream-6ee3680614047f7732731ebbaac946a93ab4f693.tar.bz2
upstream-6ee3680614047f7732731ebbaac946a93ab4f693.zip
octeon: add new target and support for Ubiquiti EdgeRouter 6P
Ubiquiti EdgeRouter 6P is 6 port router with similar specifications as the EdgeRouter 4, support for which was added in commit dd651e54cc5eadba480a56a7d2c18471e560f491 There are five 10/100/1000 Mbps RJ/Copper ports and one 1000 Mbps SFP port. SoC: Octeon Cavium 7130 (Cavium 3) at 1000MHz Memory: 1GiB DDR3 Flash: 2x2M chips with uboots (chainloaded) + 512K eeprom LEDs: 1x for power status (white/blue, controllable) and 6x for ethernet and SFP ports (no control over them) Buttons: 1x Reset Serial: 1x RJ45 port on front panel. 115200 baud, 8N1 USB: 1x USB3.0 on front panel MII: 1x QSGMII from SoC PHY: 1x Vitesse VSC8504 of which 4 ports are used (phys 4-7) 1x Vitesse VSC8514 of which 2 ports are used (phys 8-9) Network port mapping - eth0 on device maps to lan0 and phy5 - eth1 on device maps to lan1 and phy6 - eth2 on device maps to lan2 and phy7 - eth3 on device maps to lan3 and phy8 - eth4 on device maps to lan4 and phy9 - eth5 (SFP) on device maps to lan5 and phy4 What is not working: - There is no port status available before it goes up - SFP have no additional status and presented as no different from eth - Power-over-ethernet (passive) support has not been tested How to flash the firmware: - copy openwrt-octeon-ubnt_edgerouter-6p-initramfs-kernel.bin and openwrt-octeon-ubnt_edgerouter-6p-squashfs-sysupgrade.tar to USB flash drive that is formatted to vfat/fat32 - connect USB flash drive to EdgeRouter 6P front USB port - connect serial cable using front RJ45 port (115200 baud, 8N1) - connect power to cable to EdgeRouter 6P - connect terminal to the console to see uboot boot process - interrupt boot by pressing button(s) on your keyboard to log in to the uboot - detect usb connected flash drives by typing to the console: usb start - after drive is detected load initramfs+kernel to the memory by typing: fatload usb 0:1 0x20000000 openwrt-octeon-ubnt_edgerouter-6p-initramfs-kernel.bin - after initramfs+kernel is loaded to the memory load it by typing: bootoctlinux 0 numcores=4 endbootargs mem=0 - boot process should finish and you will be greeted with console after pressing enter - create directory to mount usb flash drive to by typing: mkdir /tmp/sda - mount flash drive to that directory by typing: mount /dev/sda1 /tmp/sda - flash firmware to router internal storage by typing: sysupgrade /tmp/sda/openwrt-octeon-ubnt_edgerouter-6p-squashfs-sysupgrade.tar - device will reboot and after it gets up you will have edgerouter 6p running openwrt Signed-off-by: Dan Brown <danbrown@gmail.com> [reorder/squash patches, move ethernet@0 to DTS, share image setup] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target')
-rw-r--r--target/linux/octeon/base-files/etc/board.d/01_network3
-rw-r--r--target/linux/octeon/base-files/lib/preinit/79_move_config3
-rwxr-xr-xtarget/linux/octeon/base-files/lib/upgrade/platform.sh9
-rw-r--r--target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-6p.dts60
-rw-r--r--target/linux/octeon/image/Makefile17
5 files changed, 85 insertions, 7 deletions
diff --git a/target/linux/octeon/base-files/etc/board.d/01_network b/target/linux/octeon/base-files/etc/board.d/01_network
index e62d3c28bf..194faeaad9 100644
--- a/target/linux/octeon/base-files/etc/board.d/01_network
+++ b/target/linux/octeon/base-files/etc/board.d/01_network
@@ -13,6 +13,9 @@ itus,shield-router)
ubnt,edgerouter-4)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "lan0"
;;
+ubnt,edgerouter-6p)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 lan5" "lan0"
+ ;;
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
diff --git a/target/linux/octeon/base-files/lib/preinit/79_move_config b/target/linux/octeon/base-files/lib/preinit/79_move_config
index 5a84e6f18a..ae155a3c5c 100644
--- a/target/linux/octeon/base-files/lib/preinit/79_move_config
+++ b/target/linux/octeon/base-files/lib/preinit/79_move_config
@@ -21,7 +21,8 @@ octeon_move_config() {
itus,shield-router)
move_config "/dev/mmcblk1p1"
;;
- ubnt,edgerouter-4)
+ ubnt,edgerouter-4 | \
+ ubnt,edgerouter-6p)
move_config "/dev/mmcblk0p1"
;;
esac
diff --git a/target/linux/octeon/base-files/lib/upgrade/platform.sh b/target/linux/octeon/base-files/lib/upgrade/platform.sh
index ad5baef4a1..255699bb31 100755
--- a/target/linux/octeon/base-files/lib/upgrade/platform.sh
+++ b/target/linux/octeon/base-files/lib/upgrade/platform.sh
@@ -29,7 +29,8 @@ platform_copy_config() {
cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
umount /mnt
;;
- ubnt,edgerouter-4)
+ ubnt,edgerouter-4 | \
+ ubnt,edgerouter-6p)
mount -t vfat /dev/mmcblk0p1 /mnt
cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE"
umount /mnt
@@ -84,7 +85,8 @@ platform_do_upgrade() {
[ -b "${rootfs}" ] || return 1
case "$board" in
er | \
- ubnt,edgerouter-4)
+ ubnt,edgerouter-4 | \
+ ubnt,edgerouter-6p)
kernel=mmcblk0p1
;;
erlite)
@@ -114,7 +116,8 @@ platform_check_image() {
er | \
erlite | \
itus,shield-router | \
- ubnt,edgerouter-4)
+ ubnt,edgerouter-4 | \
+ ubnt,edgerouter-6p)
local kernel_length=$(tar xf $tar_file $board_dir/kernel -O | wc -c 2> /dev/null)
local rootfs_length=$(tar xf $tar_file $board_dir/root -O | wc -c 2> /dev/null)
[ "$kernel_length" = 0 -o "$rootfs_length" = 0 ] && {
diff --git a/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-6p.dts b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-6p.dts
new file mode 100644
index 0000000000..7d31885928
--- /dev/null
+++ b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-6p.dts
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "cn7130_ubnt_edgerouter-e300.dtsi"
+
+/ {
+ compatible = "ubnt,edgerouter-6p", "cavium,cn7130";
+ model = "Ubiquiti EdgeRouter 6P";
+};
+
+&smi0 {
+ phy8: ethernet-phy@8 {
+ device_type = "ethernet-phy";
+ interrupts = <17 8>;
+ interrupt-parent = <&gpio>;
+ compatible = "vitesse,vsc8514", "ethernet-phy-ieee802.3-c22";
+ reg = <8>;
+ };
+
+ phy9: ethernet-phy@9 {
+ device_type = "ethernet-phy";
+ interrupts = <17 8>;
+ interrupt-parent = <&gpio>;
+ compatible = "vitesse,vsc8514", "ethernet-phy-ieee802.3-c22";
+ reg = <9>;
+ };
+};
+
+&pip {
+ interface@0 {
+ ethernet@0 {
+ label = "lan5";
+ status = "okay";
+ phy-mode = "sgmii";
+ phy-handle = <&phy4>;
+ mtd-mac-address = <&eeprom 0>;
+ };
+ };
+
+ interface@1 {
+ status = "okay";
+
+ ethernet@0 {
+ label = "lan3";
+ status = "okay";
+ phy-mode = "sgmii";
+ phy-handle = <&phy8>;
+ mtd-mac-address = <&eeprom 0>;
+ mtd-mac-address-increment = <(4)>;
+ };
+
+ ethernet@1 {
+ label = "lan4";
+ status = "okay";
+ phy-mode = "sgmii";
+ phy-handle = <&phy9>;
+ mtd-mac-address = <&eeprom 0>;
+ mtd-mac-address-increment = <(5)>;
+ };
+ };
+};
diff --git a/target/linux/octeon/image/Makefile b/target/linux/octeon/image/Makefile
index 11da22df3b..f77159e1f9 100644
--- a/target/linux/octeon/image/Makefile
+++ b/target/linux/octeon/image/Makefile
@@ -51,17 +51,28 @@ define Device/ubnt_edgerouter
endef
TARGET_DEVICES += ubnt_edgerouter
-define Device/ubnt_edgerouter-4
+define Device/ubnt_edgerouter-e300
DEVICE_VENDOR := Ubiquiti
- DEVICE_MODEL := EdgeRouter 4
- DEVICE_DTS := cn7130_ubnt_edgerouter-4
DEVICE_PACKAGES += kmod-gpio-button-hotplug kmod-leds-gpio kmod-of-mdio kmod-sfp kmod-usb3 kmod-usb-dwc3 kmod-usb-storage-uas
KERNEL := kernel-bin | patch-cmdline | append-dtb-to-elf
KERNEL_DEPENDS := $$(wildcard $(DTS_DIR)/$(DEVICE_DTS).dts)
CMDLINE := root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
endef
+
+define Device/ubnt_edgerouter-4
+ $(Device/ubnt_edgerouter-e300)
+ DEVICE_MODEL := EdgeRouter 4
+ DEVICE_DTS := cn7130_ubnt_edgerouter-4
+endef
TARGET_DEVICES += ubnt_edgerouter-4
+define Device/ubnt_edgerouter-6p
+ $(Device/ubnt_edgerouter-e300)
+ DEVICE_MODEL := EdgeRouter 6P
+ DEVICE_DTS := cn7130_ubnt_edgerouter-6p
+endef
+TARGET_DEVICES += ubnt_edgerouter-6p
+
ERLITE_CMDLINE:=-mtdparts=phys_mapped_flash:512k(boot0)ro,512k(boot1)ro,64k(eeprom)ro root=/dev/sda2 rootfstype=squashfs,ext4 rootwait
define Device/ubnt_edgerouter-lite
DEVICE_VENDOR := Ubiquiti