aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorAndrew Pikler <andrew.pikler@gmail.com>2020-10-05 17:16:44 +0300
committerPetr Štetiar <ynezz@true.cz>2020-12-22 19:11:50 +0100
commit28262f815e4d0fe5302babc696ed5ce518b33759 (patch)
tree2d0cff9a36ae80ae550d363c0f2ff63dc9b9eeee /target
parent40437b18f41918d7bbbb7da986b8842bf82f9ff0 (diff)
downloadupstream-28262f815e4d0fe5302babc696ed5ce518b33759.tar.gz
upstream-28262f815e4d0fe5302babc696ed5ce518b33759.tar.bz2
upstream-28262f815e4d0fe5302babc696ed5ce518b33759.zip
ramips: add support for D-Link DIR-882 R1
Specifications: - SoC: MediaTek MT7621AT - RAM: 128 MB (DDR3) - Flash: 16 MB (SPI NOR) - WiFi: MediaTek MT7615N (x2) - Switch: 1 WAN, 4 LAN (Gigabit) - Ports: 1 USB 2.0, 1 USB 3.0 - Buttons: Reset, WiFi Toggle, WPS - LEDs: Power, Internet, WiFi 2.4G WiFi 5G, USB 2.0, USB 3.0 The R1 revision is identical to the A1 revision except - No Config2 Parition, therefore - factory partition resized to 64k from 128K - Firmware partition offset is 0x50000 not 0x60000 - Firmware partitions size increased by 64K - Firmware partition type is "denx,uimage", not "sge,uimage" - Padding of image creation "uimage-padhdr 96" removed Installation: - Older firmware versions: put the factory image on a USB stick, turn on the telnet console, and flash using the following cmd "fw_updater Linux /mnt/usb_X_X/firmware.bin" - D-Link FailsafeUI: Power down the router, press and hold the reset button, then re-plug it. Keep the reset button pressed until the internet LED stops flashing, then jack into any lan port and manually assign a static IP address in 192.168.0.0/24 other than 192.168.0.0 (e.g. 192.168.0.2) and go to http://192.168.0.1 Flash with the factory image. Signed-off-by: Andrew Pikler <andrew.pikler@gmail.com>
Diffstat (limited to 'target')
-rw-r--r--target/linux/ramips/dts/mt7621_dlink_dir-882-a1.dts17
-rw-r--r--target/linux/ramips/dts/mt7621_dlink_dir-882-r1.dts9
-rw-r--r--target/linux/ramips/dts/mt7621_dlink_dir-882-x1.dtsi17
-rw-r--r--target/linux/ramips/dts/mt7621_dlink_dir-8xx-a1.dtsi132
-rw-r--r--target/linux/ramips/dts/mt7621_dlink_dir-8xx-r1.dtsi43
-rw-r--r--target/linux/ramips/dts/mt7621_dlink_dir-8xx-x1.dtsi133
-rw-r--r--target/linux/ramips/image/mt7621.mk22
-rwxr-xr-xtarget/linux/ramips/mt7621/base-files/etc/board.d/01_leds3
8 files changed, 228 insertions, 148 deletions
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-882-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-882-a1.dts
index bc2c6dfe86..cef0705393 100644
--- a/target/linux/ramips/dts/mt7621_dlink_dir-882-a1.dts
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-882-a1.dts
@@ -1,24 +1,9 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "mt7621_dlink_dir-8xx-a1.dtsi"
+#include "mt7621_dlink_dir-882-x1.dtsi"
/ {
compatible = "dlink,dir-882-a1", "mediatek,mt7621-soc";
model = "D-Link DIR-882 A1";
};
-
-&leds {
- usb2 {
- label = "green:usb2";
- gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
- trigger-sources = <&ehci_port2>;
- linux,default-trigger = "usbport";
- };
-
- usb3 {
- label = "green:usb3";
- gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
- trigger-sources = <&xhci_ehci_port1>;
- linux,default-trigger = "usbport";
- };
-};
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-882-r1.dts b/target/linux/ramips/dts/mt7621_dlink_dir-882-r1.dts
new file mode 100644
index 0000000000..26b6f34707
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-882-r1.dts
@@ -0,0 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_dlink_dir-8xx-r1.dtsi"
+#include "mt7621_dlink_dir-882-x1.dtsi"
+
+/ {
+ compatible = "dlink,dir-882-r1", "mediatek,mt7621-soc";
+ model = "D-Link DIR-882 R1";
+};
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-882-x1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dir-882-x1.dtsi
new file mode 100644
index 0000000000..cafb1df964
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-882-x1.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+&leds {
+ usb2 {
+ label = "green:usb2";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&ehci_port2>;
+ linux,default-trigger = "usbport";
+ };
+
+ usb3 {
+ label = "green:usb3";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ trigger-sources = <&xhci_ehci_port1>;
+ linux,default-trigger = "usbport";
+ };
+};
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-8xx-a1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dir-8xx-a1.dtsi
index e451d6a39f..c43cc49aa1 100644
--- a/target/linux/ramips/dts/mt7621_dlink_dir-8xx-a1.dtsi
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-8xx-a1.dtsi
@@ -1,65 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include "mt7621.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
- aliases {
- label-mac-device = &gmac0;
- led-boot = &led_power_orange;
- led-failsafe = &led_power_green;
- led-running = &led_power_green;
- led-upgrade = &led_net_orange;
- };
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
-
- wifi {
- label = "wifi";
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RFKILL>;
- };
- };
-
- leds: leds {
- compatible = "gpio-leds";
-
- led_power_orange: power_orange {
- label = "orange:power";
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- };
-
- led_power_green: power_green {
- label = "green:power";
- gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
- };
-
- led_net_orange: net_orange {
- label = "orange:net";
- gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
- };
-
- net_green {
- label = "green:net";
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- };
- };
-};
+#include "mt7621_dlink_dir-8xx-x1.dtsi"
&spi0 {
status = "okay";
@@ -100,74 +41,3 @@
};
};
};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- wifi@0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x0000>;
- ieee80211-freq-limit = <2400000 2500000>;
-
- led {
- led-active-low;
- };
- };
-};
-
-&pcie1 {
- wifi@0,0 {
- compatible = "mediatek,mt76";
- reg = <0x0000 0 0 0 0>;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
-
- led {
- led-active-low;
- };
- };
-};
-
-&gmac0 {
- mtd-mac-address = <&factory 0xe000>;
-};
-
-&switch0 {
- ports {
- port@0 {
- status = "okay";
- label = "lan4";
- };
-
- port@1 {
- status = "okay";
- label = "lan3";
- };
-
- port@2 {
- status = "okay";
- label = "lan2";
- };
-
- port@3 {
- status = "okay";
- label = "lan1";
- };
-
- port@4 {
- status = "okay";
- label = "wan";
- mtd-mac-address = <&factory 0xe006>;
- };
- };
-};
-
-&state_default {
- gpio {
- groups = "i2c", "uart3", "jtag", "wdt";
- function = "gpio";
- };
-};
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-8xx-r1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dir-8xx-r1.dtsi
new file mode 100644
index 0000000000..e93a06d9fe
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-8xx-r1.dtsi
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621_dlink_dir-8xx-x1.dtsi"
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
diff --git a/target/linux/ramips/dts/mt7621_dlink_dir-8xx-x1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dir-8xx-x1.dtsi
new file mode 100644
index 0000000000..7ab0e8bd5d
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_dlink_dir-8xx-x1.dtsi
@@ -0,0 +1,133 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ aliases {
+ label-mac-device = &gmac0;
+ led-boot = &led_power_orange;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_net_orange;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ wifi {
+ label = "wifi";
+ gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RFKILL>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+
+ led_power_orange: power_orange {
+ label = "orange:power";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ led_net_orange: net_orange {
+ label = "orange:net";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ net_green {
+ label = "green:net";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ ieee80211-freq-limit = <2400000 2500000>;
+
+ led {
+ led-active-low;
+ };
+ };
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "mediatek,mt76";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+
+ led {
+ led-active-low;
+ };
+ };
+};
+
+&gmac0 {
+ mtd-mac-address = <&factory 0xe000>;
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "wan";
+ mtd-mac-address = <&factory 0xe006>;
+ };
+ };
+};
+
+&state_default {
+ gpio {
+ groups = "i2c", "uart3", "jtag", "wdt";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index cc0eb1d279..cf81a862ff 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -235,6 +235,17 @@ define Device/dlink_dir-8xx-a1
check-size
endef
+define Device/dlink_dir-8xx-r1
+ $(Device/dsa-migration)
+ IMAGE_SIZE := 16064k
+ DEVICE_VENDOR := D-Link
+ DEVICE_PACKAGES := kmod-mt7615e kmod-mt7615-firmware
+ KERNEL_INITRAMFS := $$(KERNEL)
+ IMAGES += factory.bin
+ IMAGE/sysupgrade.bin := append-kernel | append-rootfs |\
+ pad-rootfs | append-metadata | check-size
+endef
+
define Device/dlink_dir-xx60-a1
$(Device/dsa-migration)
BLOCKSIZE := 128k
@@ -312,6 +323,17 @@ define Device/dlink_dir-882-a1
endef
TARGET_DEVICES += dlink_dir-882-a1
+define Device/dlink_dir-882-r1
+ $(Device/dlink_dir-8xx-r1)
+ DEVICE_MODEL := DIR-882
+ DEVICE_VARIANT := R1
+ DEVICE_PACKAGES += kmod-usb3 kmod-usb-ledtrig-usbport
+ IMAGE/factory.bin := append-kernel | append-rootfs | check-size | \
+ sign-dlink-ru 57c5375741c30ca9ebcb36713db4ba51 \
+ ab0dff19af8842cdb70a86b4b68d23f7
+endef
+TARGET_DEVICES += dlink_dir-882-r1
+
define Device/d-team_newifi-d2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)
diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
index cd1814cc2b..8d91b36346 100755
--- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds
@@ -30,7 +30,8 @@ dlink,dir-2660-a1)
dlink,dir-860l-b1|\
dlink,dir-867-a1|\
dlink,dir-878-a1|\
-dlink,dir-882-a1)
+dlink,dir-882-a1|\
+dlink,dir-882-r1)
ucidef_set_led_netdev "wan" "wan" "green:net" "wan"
;;
gnubee,gb-pc1|\