omap: remove obsolete kernel version support

Signed-off-by: Felix Fietkau <nbd@nbd.name>

12 files changed, 0 insertions, 2081 deletions

diff --git a/target/linux/omap/config-3.18 b/target/linux/omap/config-3.18
deleted file mode 100644
index d5003c275b..0000000000
--- a/target/linux/omap/config-3.18
+++ /dev/null
@@ -1,582 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_BANDGAP=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_ARCH_OMAP4=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARM=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_OMAP2PLUS_CPUFREQ=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AT803X_PHY=y
-# CONFIG_ATH_CARDS is not set
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_AVERAGE=y
-# CONFIG_BACKLIGHT_ADP8860 is not set
-# CONFIG_BACKLIGHT_ADP8870 is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_BACKLIGHT_TPS65217 is not set
-CONFIG_BCH=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CACHE_PL310=y
-CONFIG_CFG80211=m
-# CONFIG_CFG80211_DEBUGFS is not set
-CONFIG_CFG80211_DEFAULT_PS=y
-# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
-# CONFIG_CFG80211_INTERNAL_REGDB is not set
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_CFG80211_WEXT=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-# CONFIG_CLK_TWL6040 is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyO0,115200n8"
-CONFIG_COMMON_CLK=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CPUFREQ_DT is not set
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=m
-CONFIG_CRYPTO_SEQIV=m
-# CONFIG_CRYPTO_SHA1_ARM_NEON is not set
-# CONFIG_CRYPTO_SHA512_ARM_NEON is not set
-CONFIG_CRYPTO_WORKQUEUE=m
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DDR=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_UART_PL01X is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DISPLAY_PANEL_DPI=y
-CONFIG_DISPLAY_PANEL_DSI_CM=y
-# CONFIG_DISPLAY_PANEL_NEC_NL8048HL11 is not set
-CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_DISPLAY_PANEL_SONY_ACX565AKM is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OMAP=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-# CONFIG_DW_DMAC_CORE is not set
-CONFIG_EEPROM_AT24=y
-# CONFIG_EMAC_ROCKCHIP is not set
-CONFIG_EXT4_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DA8XX=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-CONFIG_FB_OMAP2_NUM_FBS=3
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FREEZER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FW_LOADER_USER_HELPER=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_OMAP=y
-# CONFIG_GPIO_SYSCON is not set
-CONFIG_GPIO_TPS65910=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_TWL6040 is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HDMI=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_OMAP=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MATRIXKMAP=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_TWL6040_VIBRA is not set
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_KEYBOARD_TWL4030=y
-# CONFIG_LCD_AMS369FG06 is not set
-CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_L4F00242T03 is not set
-# CONFIG_LCD_LD9040 is not set
-# CONFIG_LCD_LMS283GF05 is not set
-# CONFIG_LCD_LTV350QV is not set
-# CONFIG_LCD_PLATFORM is not set
-# CONFIG_LCD_S6E63M0 is not set
-# CONFIG_LCD_TDO24M is not set
-# CONFIG_LCD_VGG2432A4 is not set
-CONFIG_LEDS_GPIO=y
-# CONFIG_LEDS_REGULATOR is not set
-# CONFIG_LEDS_SYSCON is not set
-CONFIG_LIBFDT=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MAC80211=m
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_MAC80211_HAS_RC=y
-# CONFIG_MAC80211_HWSIM is not set
-# CONFIG_MAC80211_LEDS is not set
-# CONFIG_MAC80211_MESH is not set
-CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
-CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL=y
-CONFIG_MAC80211_RC_MINSTREL_HT=y
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_CM_T3517 is not set
-# CONFIG_MACH_CRANEBOARD is not set
-# CONFIG_MACH_DEVKIT8000 is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3530_LV_SOM is not set
-CONFIG_MACH_OMAP3_BEAGLE=y
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TORPEDO is not set
-# CONFIG_MACH_OMAP_3430SDP is not set
-CONFIG_MACH_OMAP_GENERIC=y
-# CONFIG_MACH_OMAP_LDP is not set
-CONFIG_MACH_OVERO=y
-# CONFIG_MACH_SBC3530 is not set
-# CONFIG_MACH_TOUCHBOOK is not set
-CONFIG_MAILBOX=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MEMORY=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MFD_TI_AM335X_TSCADC=y
-CONFIG_MFD_TPS65217=y
-CONFIG_MFD_TPS65910=y
-CONFIG_MFD_TWL4030_AUDIO=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_OMAP is not set
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCH=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_BCH=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_BCH=y
-CONFIG_MTD_NAND_OMAP_BCH_BUILD=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_MWIFIEX is not set
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-# CONFIG_NET_VENDOR_I825XX is not set
-# CONFIG_NL80211_TESTMODE is not set
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OF_TOUCHSCREEN=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OMAP2PLUS_MBOX=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_DSS_DPI=y
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_OMAP2_DSS_HDMI_COMMON=y
-CONFIG_OMAP2_DSS_INIT=y
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
-# CONFIG_OMAP2_DSS_VENC is not set
-CONFIG_OMAP2_VRFB=y
-# CONFIG_OMAP3_EMU is not set
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-CONFIG_OMAP4_DSS_HDMI=y
-CONFIG_OMAP4_DSS_HDMI_AUDIO=y
-CONFIG_OMAP5_DSS_HDMI=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_CONTROL_PHY=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_INTERCONNECT=y
-CONFIG_OMAP_IRQCHIP=y
-CONFIG_OMAP_MBOX_KFIFO_SIZE=256
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_OCP2SCP=y
-CONFIG_OMAP_PACKAGE_CBB=y
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PCI is not set
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_PL310_ERRATA_727915=y
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_OPP=y
-CONFIG_PM_RUNTIME=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_AVS=y
-# CONFIG_POWER_AVS_OMAP is not set
-CONFIG_PPS=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-# CONFIG_PWM_FSL_FTM is not set
-CONFIG_PWM_SYSFS=y
-CONFIG_PWM_TIECAP=y
-CONFIG_PWM_TIEHRPWM=y
-CONFIG_PWM_TIPWMSS=y
-# CONFIG_PWM_TWL is not set
-# CONFIG_PWM_TWL_LED is not set
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_ANATOP is not set
-# CONFIG_REGULATOR_DEBUG is not set
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-# CONFIG_REGULATOR_PBIAS is not set
-# CONFIG_REGULATOR_PWM is not set
-CONFIG_REGULATOR_TPS65023=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_REGULATOR_TPS65217=y
-CONFIG_REGULATOR_TPS65910=y
-CONFIG_REGULATOR_TWL4030=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-# CONFIG_RSI_91X is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_RTC_DRV_TPS65910=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SENSORS_LM75=y
-# CONFIG_SENSORS_PWM_FAN is not set
-CONFIG_SENSORS_TWL4030_MADC=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SMSC911X=y
-# CONFIG_SMSC911X_ARCH_HOOKS is not set
-CONFIG_SND=y
-CONFIG_SND_ARM=y
-CONFIG_SND_COMPRESS_OFFLOAD=y
-CONFIG_SND_DAVINCI_SOC_MCASP=y
-CONFIG_SND_DMAENGINE_PCM=y
-# CONFIG_SND_EDMA_SOC is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_JACK=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_DMIC=y
-CONFIG_SND_OMAP_SOC_HDMI=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
-CONFIG_SND_OMAP_SOC_MCPDM=y
-CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=y
-CONFIG_SND_OMAP_SOC_OMAP_HDMI=y
-CONFIG_SND_OMAP_SOC_OMAP_TWL4030=y
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-CONFIG_SND_PCM=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_DMIC=y
-# CONFIG_SND_SOC_FSL_SSI is not set
-CONFIG_SND_SOC_HDMI_CODEC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_IMX_AUDMUX is not set
-CONFIG_SND_SOC_TLV320AIC3X=y
-CONFIG_SND_SOC_TWL4030=y
-CONFIG_SND_SOC_TWL6040=y
-CONFIG_SND_TIMER=y
-CONFIG_SOC_AM33XX=y
-CONFIG_SOC_AM43XX=y
-CONFIG_SOC_BUS=y
-CONFIG_SOC_HAS_OMAP2_SDRC=y
-# CONFIG_SOC_OMAP3430 is not set
-# CONFIG_SOC_TI81XX is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_OMAP24XX is not set
-CONFIG_STOP_MACHINE=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TI_CPPI41=y
-CONFIG_TI_CPSW=y
-CONFIG_TI_CPSW_PHY_SEL=y
-CONFIG_TI_CPTS=y
-CONFIG_TI_DAVINCI_CPDMA=y
-# CONFIG_TI_DAVINCI_EMAC is not set
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_TI_EDMA=y
-CONFIG_TI_EMIF=y
-# CONFIG_TI_PIPE3 is not set
-CONFIG_TI_PRIV_EDMA=y
-CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
-CONFIG_TREE_RCU=y
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_MADC=y
-CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_WATCHDOG=y
-CONFIG_TWL6040_CORE=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VIDEOMODE_HELPERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_XEN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/omap/config-4.1 b/target/linux/omap/config-4.1
deleted file mode 100644
index 14f13f09e4..0000000000
--- a/target/linux/omap/config-4.1
+++ /dev/null
@@ -1,540 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_BANDGAP=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OMAP=y
-CONFIG_ARCH_OMAP2PLUS=y
-CONFIG_ARCH_OMAP2PLUS_TYPICAL=y
-CONFIG_ARCH_OMAP3=y
-CONFIG_ARCH_OMAP4=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARM=y
-# CONFIG_ARM_CPUIDLE is not set
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_OMAP2PLUS_CPUFREQ=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_AT803X_PHY=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_AVERAGE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_BACKLIGHT_TPS65217 is not set
-CONFIG_BCH=y
-CONFIG_BOUNCE=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-# CONFIG_CLK_TWL6040 is not set
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyO0,115200n8"
-CONFIG_COMMON_CLK=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_CPUFREQ_DT is not set
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=m
-CONFIG_CRYPTO_AEAD2=m
-CONFIG_CRYPTO_CCM=m
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_GHASH=m
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_MANAGER=m
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_RNG=m
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SEQIV=m
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DDR=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DISPLAY_ENCODER_OPA362 is not set
-CONFIG_DISPLAY_PANEL_DPI=y
-CONFIG_DISPLAY_PANEL_DSI_CM=y
-# CONFIG_DISPLAY_PANEL_NEC_NL8048HL11 is not set
-CONFIG_DISPLAY_PANEL_SHARP_LS037V7DW01=y
-# CONFIG_DISPLAY_PANEL_SONY_ACX565AKM is not set
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_OMAP=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EXT4_FS=y
-CONFIG_FB=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CFB_REV_PIXELS_IN_BYTE=y
-CONFIG_FB_CMDLINE=y
-CONFIG_FB_DA8XX=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_OMAP2=y
-CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
-CONFIG_FB_OMAP2_NUM_FBS=3
-CONFIG_FIRMWARE_EDID=y
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_FREEZER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_OMAP=y
-CONFIG_GPIO_TPS65910=y
-CONFIG_GPIO_TWL4030=y
-# CONFIG_GPIO_TWL6040 is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HDMI=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWMON=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-CONFIG_I2C_OMAP=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MATRIXKMAP=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_TWL4030_PWRBUTTON=y
-# CONFIG_INPUT_TWL4030_VIBRA is not set
-# CONFIG_INPUT_TWL6040_VIBRA is not set
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KEYBOARD_TWL4030=y
-CONFIG_LCD_CLASS_DEVICE=y
-# CONFIG_LCD_PLATFORM is not set
-CONFIG_LEDS_GPIO=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_LOGO_LINUX_MONO=y
-CONFIG_LOGO_LINUX_VGA16=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MACH_CM_T35 is not set
-# CONFIG_MACH_NOKIA_RX51 is not set
-# CONFIG_MACH_OMAP3517EVM is not set
-# CONFIG_MACH_OMAP3530_LV_SOM is not set
-CONFIG_MACH_OMAP3_BEAGLE=y
-# CONFIG_MACH_OMAP3_PANDORA is not set
-# CONFIG_MACH_OMAP3_TORPEDO is not set
-CONFIG_MACH_OMAP_GENERIC=y
-# CONFIG_MACH_OMAP_LDP is not set
-CONFIG_MACH_OVERO=y
-CONFIG_MAILBOX=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MEMORY=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MFD_TI_AM335X_TSCADC=y
-CONFIG_MFD_TPS65217=y
-CONFIG_MFD_TPS65910=y
-CONFIG_MFD_TWL4030_AUDIO=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-# CONFIG_MMC_OMAP is not set
-CONFIG_MMC_OMAP_HS=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_DATAFLASH=y
-# CONFIG_MTD_DATAFLASH_OTP is not set
-# CONFIG_MTD_DATAFLASH_WRITE_VERIFY is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_BCH=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ECC_BCH=y
-CONFIG_MTD_NAND_OMAP2=y
-CONFIG_MTD_NAND_OMAP_BCH=y
-CONFIG_MTD_NAND_OMAP_BCH_BUILD=y
-CONFIG_MTD_PHYSMAP=y
-# CONFIG_MTD_PHYSMAP_OF is not set
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-# CONFIG_NET_VENDOR_I825XX is not set
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OF_TOUCHSCREEN=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OMAP2PLUS_MBOX=y
-CONFIG_OMAP2_DSS=y
-CONFIG_OMAP2_DSS_DPI=y
-CONFIG_OMAP2_DSS_DSI=y
-CONFIG_OMAP2_DSS_HDMI_COMMON=y
-CONFIG_OMAP2_DSS_INIT=y
-CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
-CONFIG_OMAP2_DSS_SDI=y
-CONFIG_OMAP2_DSS_SLEEP_AFTER_VENC_RESET=y
-# CONFIG_OMAP2_DSS_VENC is not set
-CONFIG_OMAP2_VRFB=y
-# CONFIG_OMAP3_L2_AUX_SECURE_SAVE_RESTORE is not set
-# CONFIG_OMAP3_SDRC_AC_TIMING is not set
-CONFIG_OMAP4_DSS_HDMI=y
-CONFIG_OMAP5_DSS_HDMI=y
-CONFIG_OMAP_32K_TIMER=y
-CONFIG_OMAP_CONTROL_PHY=y
-CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_GPMC=y
-CONFIG_OMAP_INTERCONNECT=y
-CONFIG_OMAP_IRQCHIP=y
-CONFIG_OMAP_MBOX_KFIFO_SIZE=256
-CONFIG_OMAP_MUX=y
-# CONFIG_OMAP_MUX_DEBUG is not set
-CONFIG_OMAP_MUX_WARNINGS=y
-CONFIG_OMAP_OCP2SCP=y
-CONFIG_OMAP_PACKAGE_CBB=y
-CONFIG_OMAP_PM_NOOP=y
-CONFIG_OMAP_RESET_CLOCKS=y
-CONFIG_OMAP_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-# CONFIG_PCI is not set
-# CONFIG_PCI_DOMAINS_GENERIC is not set
-# CONFIG_PCI_SYSCALL is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-# CONFIG_PHY_DM816X_USB is not set
-CONFIG_PINCTRL=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_PL310_ERRATA_727915=y
-# CONFIG_PL310_ERRATA_753970 is not set
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_AVS=y
-# CONFIG_POWER_AVS_OMAP is not set
-CONFIG_PPS=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-CONFIG_PWM_TIECAP=y
-CONFIG_PWM_TIEHRPWM=y
-CONFIG_PWM_TIPWMSS=y
-# CONFIG_PWM_TWL is not set
-# CONFIG_PWM_TWL_LED is not set
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_IRQ=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-# CONFIG_REGULATOR_PBIAS is not set
-CONFIG_REGULATOR_TPS65023=y
-CONFIG_REGULATOR_TPS6507X=y
-CONFIG_REGULATOR_TPS65217=y
-CONFIG_REGULATOR_TPS65910=y
-CONFIG_REGULATOR_TWL4030=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_OMAP=y
-CONFIG_RTC_DRV_TPS65910=y
-CONFIG_RTC_DRV_TWL4030=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SENSORS_LM75=y
-CONFIG_SENSORS_TWL4030_MADC=y
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_OMAP is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_OMAP=y
-CONFIG_SERIAL_OMAP_CONSOLE=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SMSC911X=y
-# CONFIG_SMSC911X_ARCH_HOOKS is not set
-CONFIG_SND=y
-CONFIG_SND_ARM=y
-CONFIG_SND_COMPRESS_OFFLOAD=y
-CONFIG_SND_DAVINCI_SOC_MCASP=y
-CONFIG_SND_DMAENGINE_PCM=y
-# CONFIG_SND_EDMA_SOC is not set
-# CONFIG_SND_EMU10K1_SEQ is not set
-CONFIG_SND_JACK=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_DMIC=y
-# CONFIG_SND_OMAP_SOC_HDMI_AUDIO is not set
-CONFIG_SND_OMAP_SOC_MCBSP=y
-CONFIG_SND_OMAP_SOC_MCPDM=y
-CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=y
-CONFIG_SND_OMAP_SOC_OMAP_TWL4030=y
-# CONFIG_SND_OMAP_SOC_RX51 is not set
-# CONFIG_SND_OPL3_LIB_SEQ is not set
-# CONFIG_SND_OPL4_LIB_SEQ is not set
-CONFIG_SND_PCM=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_RAWMIDI_SEQ is not set
-# CONFIG_SND_SBAWE_SEQ is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_DMIC=y
-# CONFIG_SND_SOC_FSL_SSI is not set
-CONFIG_SND_SOC_HDMI_CODEC=y
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_IMX_AUDMUX is not set
-# CONFIG_SND_SOC_RT5677_SPI is not set
-CONFIG_SND_SOC_TLV320AIC3X=y
-CONFIG_SND_SOC_TWL4030=y
-CONFIG_SND_SOC_TWL6040=y
-CONFIG_SND_TIMER=y
-CONFIG_SOC_AM33XX=y
-CONFIG_SOC_AM43XX=y
-CONFIG_SOC_BUS=y
-CONFIG_SOC_HAS_OMAP2_SDRC=y
-# CONFIG_SOC_OMAP3430 is not set
-# CONFIG_SOC_TI81XX is not set
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SOUND_OSS_CORE_PRECLAIM=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-# CONFIG_SPI_OMAP24XX is not set
-CONFIG_SRCU=y
-CONFIG_STOP_MACHINE=y
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TI_CPPI41=y
-CONFIG_TI_CPSW=y
-CONFIG_TI_CPSW_ALE=y
-CONFIG_TI_CPSW_PHY_SEL=y
-CONFIG_TI_CPTS=y
-CONFIG_TI_DAVINCI_CPDMA=y
-# CONFIG_TI_DAVINCI_EMAC is not set
-CONFIG_TI_DAVINCI_MDIO=y
-CONFIG_TI_EDMA=y
-CONFIG_TI_EMIF=y
-# CONFIG_TI_PIPE3 is not set
-CONFIG_TI_PRIV_EDMA=y
-CONFIG_TOUCHSCREEN_TI_AM335X_TSC=y
-CONFIG_TREE_RCU=y
-CONFIG_TWL4030_CORE=y
-CONFIG_TWL4030_MADC=y
-CONFIG_TWL4030_POWER=y
-CONFIG_TWL4030_WATCHDOG=y
-CONFIG_TWL6040_CORE=y
-CONFIG_UID16=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB_SUPPORT=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VIDEOMODE_HELPERS=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/omap/patches-3.18/0334-video-da8xx-fb-adding-dt-support.patch b/target/linux/omap/patches-3.18/0334-video-da8xx-fb-adding-dt-support.patch
deleted file mode 100644
index 265602cdca..0000000000
--- a/target/linux/omap/patches-3.18/0334-video-da8xx-fb-adding-dt-support.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From 884d3962ef4787c8cf0b8a7a673531c623d1dff8 Mon Sep 17 00:00:00 2001
-From: Darren Etheridge <detheridge@ti.com>
-Date: Fri, 2 Aug 2013 15:35:36 -0500
-Subject: [PATCH 334/752] video: da8xx-fb: adding dt support
-
-Enhancing driver to enable probe triggered by a corresponding dt entry.
-
-Add da8xx-fb.txt documentation to devicetree section.
-
-Obtain fb_videomode details for the connected lcd panel using the
-display timing details present in DT.
-
-Ensure that platform data is present before checking whether platform
-callback is present (the one used to control backlight). So far this
-was not an issue as driver was purely non-DT triggered, but now DT
-support has been added this check must be performed.
-
-v2: squashing multiple commits from Afzal Mohammed (afzal@ti.com)
-v3: remove superfluous cast
-v4: expose both ti,am3352-lcdc and ti,da830-lcdc for .compatible
-	as driver can use enhanced features of all version of the
-	silicon block.
-v5: addressed review comments from Prabhakar Lad
-v6: Changed the .compatible naming to match the existing drm bindings
-	for am33xx devices
-v7: clarify which compatible to use in the documentation for DA850
-
-Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
-Signed-off-by: Darren Etheridge <detheridge@ti.com>
----
- .../devicetree/bindings/video/da8xx-fb.txt         |   42 +++++++++++++
- drivers/video/fbdev/da8xx-fb.c                     |   66 +++++++++++++++++++-
- 2 files changed, 105 insertions(+), 3 deletions(-)
- create mode 100644 Documentation/devicetree/bindings/video/da8xx-fb.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/video/da8xx-fb.txt
-@@ -0,0 +1,42 @@
-+TI LCD Controller on DA830/DA850/AM335x SoC's
-+
-+Required properties:
-+- compatible:
-+	DA830, DA850 - "ti,da8xx-tilcdc"
-+	AM335x SoC's - "ti,am33xx-tilcdc"
-+- reg: Address range of lcdc register set
-+- interrupts: lcdc interrupt
-+- display-timings: typical videomode of lcd panel, represented as child.
-+  Refer Documentation/devicetree/bindings/video/display-timing.txt for
-+  display timing binding details. If multiple videomodes are mentioned
-+  in display timings node, typical videomode has to be mentioned as the
-+  native mode or it has to be first child (driver cares only for native
-+  videomode).
-+
-+Recommended properties:
-+- ti,hwmods: Name of the hwmod associated to the LCDC
-+
-+Example for am335x SoC's:
-+
-+lcdc@4830e000 {
-+	compatible = "ti,am33xx-tilcdc";
-+	reg =  <0x4830e000 0x1000>;
-+	interrupts = <36>;
-+	ti,hwmods = "lcdc";
-+	status = "okay";
-+	display-timings {
-+		800x480p62 {
-+			clock-frequency = <30000000>;
-+			hactive = <800>;
-+			vactive = <480>;
-+			hfront-porch = <39>;
-+			hback-porch = <39>;
-+			hsync-len = <47>;
-+			vback-porch = <29>;
-+			vfront-porch = <13>;
-+			vsync-len = <2>;
-+			hsync-active = <1>;
-+			vsync-active = <1>;
-+		};
-+	};
-+};
---- a/drivers/video/fbdev/da8xx-fb.c
-+++ b/drivers/video/fbdev/da8xx-fb.c
-@@ -36,6 +36,7 @@
- #include <linux/slab.h>
- #include <linux/delay.h>
- #include <linux/lcm.h>
-+#include <video/of_display_timing.h>
- #include <video/da8xx-fb.h>
- #include <asm/div64.h>
- 
-@@ -1317,12 +1318,54 @@ static struct fb_ops da8xx_fb_ops = {
- 	.fb_blank = cfb_blank,
- };
- 
-+static struct lcd_ctrl_config *da8xx_fb_create_cfg(struct platform_device *dev)
-+{
-+	struct lcd_ctrl_config *cfg;
-+
-+	cfg = devm_kzalloc(&dev->dev, sizeof(struct fb_videomode), GFP_KERNEL);
-+	if (!cfg)
-+		return NULL;
-+
-+	/* default values */
-+
-+	if (lcd_revision == LCD_VERSION_1)
-+		cfg->bpp = 16;
-+	else
-+		cfg->bpp = 32;
-+
-+	/*
-+	 * For panels so far used with this LCDC, below statement is sufficient.
-+	 * For new panels, if required, struct lcd_ctrl_cfg fields to be updated
-+	 * with additional/modified values. Those values would have to be then
-+	 * obtained from dt(requiring new dt bindings).
-+	 */
-+
-+	cfg->panel_shade = COLOR_ACTIVE;
-+
-+	return cfg;
-+}
-+
- static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
- {
- 	struct da8xx_lcdc_platform_data *fb_pdata = dev_get_platdata(&dev->dev);
- 	struct fb_videomode *lcdc_info;
-+	struct device_node *np = dev->dev.of_node;
- 	int i;
- 
-+	if (np) {
-+		lcdc_info = devm_kzalloc(&dev->dev,
-+					 sizeof(struct fb_videomode),
-+					 GFP_KERNEL);
-+		if (!lcdc_info)
-+			return NULL;
-+
-+		if (of_get_fb_videomode(np, lcdc_info, OF_USE_NATIVE_MODE)) {
-+			dev_err(&dev->dev, "timings not available in DT\n");
-+			return NULL;
-+		}
-+		return lcdc_info;
-+	}
-+
- 	for (i = 0, lcdc_info = known_lcd_panels;
- 		i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) {
- 		if (strcmp(fb_pdata->type, lcdc_info->name) == 0)
-@@ -1351,7 +1394,7 @@ static int fb_probe(struct platform_devi
- 	int ret;
- 	unsigned long ulcm;
- 
--	if (fb_pdata == NULL) {
-+	if (fb_pdata == NULL && !device->dev.of_node) {
- 		dev_err(&device->dev, "Can not get platform data\n");
- 		return -ENOENT;
- 	}
-@@ -1391,7 +1434,10 @@ static int fb_probe(struct platform_devi
- 		break;
- 	}
- 
--	lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
-+	if (device->dev.of_node)
-+		lcd_cfg = da8xx_fb_create_cfg(device);
-+	else
-+		lcd_cfg = fb_pdata->controller_data;
- 
- 	if (!lcd_cfg) {
- 		ret = -EINVAL;
-@@ -1410,7 +1456,7 @@ static int fb_probe(struct platform_devi
- 	par->dev = &device->dev;
- 	par->lcdc_clk = tmp_lcdc_clk;
- 	par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
--	if (fb_pdata->panel_power_ctrl) {
-+	if (fb_pdata && fb_pdata->panel_power_ctrl) {
- 		par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
- 		par->panel_power_ctrl(1);
- 	}
-@@ -1654,12 +1700,26 @@ static int fb_resume(struct device *dev)
- 
- static SIMPLE_DEV_PM_OPS(fb_pm_ops, fb_suspend, fb_resume);
- 
-+#if IS_ENABLED(CONFIG_OF)
-+static const struct of_device_id da8xx_fb_of_match[] = {
-+	/*
-+	 * this driver supports version 1 and version 2 of the
-+	 * Texas Instruments lcd controller (lcdc) hardware block
-+	 */
-+	{.compatible = "ti,da8xx-tilcdc", },
-+	{.compatible = "ti,am33xx-tilcdc", },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, da8xx_fb_of_match);
-+#endif
-+
- static struct platform_driver da8xx_fb_driver = {
- 	.probe = fb_probe,
- 	.remove = fb_remove,
- 	.driver = {
- 		   .name = DRIVER_NAME,
- 		   .owner = THIS_MODULE,
-+		   .of_match_table = of_match_ptr(da8xx_fb_of_match),
- 		   .pm	= &fb_pm_ops,
- 		   },
- };
diff --git a/target/linux/omap/patches-3.18/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch b/target/linux/omap/patches-3.18/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch
deleted file mode 100644
index 8c0898a9d6..0000000000
--- a/target/linux/omap/patches-3.18/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 9a1a810516ae9cb3259b898b6879901c5b44fa90 Mon Sep 17 00:00:00 2001
-From: Prathap M S <msprathap@ti.com>
-Date: Mon, 2 Sep 2013 12:05:23 +0530
-Subject: [PATCH 343/752] video: da8xx-fb: Add API to register wait for vsync
- callback
-
-This patch adds APIs to register and unregister wait for vsync callback.
-This is derived from commit id 2d44302545da24fd22912d964102bc31a7489e97
-This commit id was part of 3.2 kernel sources.
-
-Signed-off-by: Prathap M S <msprathap@ti.com>
----
- drivers/video/fbdev/da8xx-fb.c |   33 +++++++++++++++++++++++++++++++++
- include/video/da8xx-fb.h       |    4 ++++
- 2 files changed, 37 insertions(+)
-
---- a/drivers/video/fbdev/da8xx-fb.c
-+++ b/drivers/video/fbdev/da8xx-fb.c
-@@ -197,6 +197,9 @@ static struct fb_fix_screeninfo da8xx_fb
- 	.accel = FB_ACCEL_NONE
- };
- 
-+static vsync_callback_t vsync_cb_handler;
-+static void *vsync_cb_arg;
-+
- static struct fb_videomode known_lcd_panels[] = {
- 	/* Sharp LCD035Q3DG01 */
- 	[0] = {
-@@ -831,6 +834,32 @@ static int lcd_init(struct da8xx_fb_par
- 	return 0;
- }
- 
-+int register_vsync_cb(vsync_callback_t handler, void *arg, int idx)
-+{
-+	if ((vsync_cb_handler == NULL) && (vsync_cb_arg == NULL)) {
-+		vsync_cb_arg = arg;
-+		vsync_cb_handler = handler;
-+	} else {
-+		return -EEXIST;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(register_vsync_cb);
-+
-+int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx)
-+{
-+	if ((vsync_cb_handler == handler) && (vsync_cb_arg == arg)) {
-+		vsync_cb_handler = NULL;
-+		vsync_cb_arg = NULL;
-+	} else {
-+		return -ENXIO;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(unregister_vsync_cb);
-+
- /* IRQ handler for version 2 of LCDC */
- static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg)
- {
-@@ -868,6 +897,8 @@ static irqreturn_t lcdc_irq_handler_rev0
- 				   LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
- 			par->vsync_flag = 1;
- 			wake_up_interruptible(&par->vsync_wait);
-+			if (vsync_cb_handler)
-+				vsync_cb_handler(vsync_cb_arg);
- 		}
- 
- 		if (stat & LCD_END_OF_FRAME1) {
-@@ -943,6 +974,8 @@ static irqreturn_t lcdc_irq_handler_rev0
- 				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
- 			par->vsync_flag = 1;
- 			wake_up_interruptible(&par->vsync_wait);
-+			if (vsync_cb_handler)
-+				vsync_cb_handler(vsync_cb_arg);
- 		}
- 	}
- 
---- a/include/video/da8xx-fb.h
-+++ b/include/video/da8xx-fb.h
-@@ -91,5 +91,9 @@ struct lcd_sync_arg {
- /* Proprietary FB_SYNC_ flags */
- #define FB_SYNC_CLK_INVERT 0x40000000
- 
-+typedef void (*vsync_callback_t)(void *arg);
-+int register_vsync_cb(vsync_callback_t handler, void *arg, int idx);
-+int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx);
-+
- #endif  /* ifndef DA8XX_FB_H */
- 
diff --git a/target/linux/omap/patches-3.18/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch b/target/linux/omap/patches-3.18/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch
deleted file mode 100644
index 6000ef1365..0000000000
--- a/target/linux/omap/patches-3.18/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From c99bd415829ef29adf71bb1e1b577650f10e93f5 Mon Sep 17 00:00:00 2001
-From: Darren Etheridge <detheridge@ti.com>
-Date: Mon, 4 Nov 2013 12:27:40 -0600
-Subject: [PATCH 752/752] video/da8xx-fb fix defect with vsync callback
- invocation
-
-Fix defect where SGX is running at half of the expected framerate.
-The original patch (@ commit ID 9a1a810516ae9cb3259b898b6879901c5b44fa90)
-seems to have a mistake where it only calls the callback
-for the even or the odd frames depending on the revision of the LCD controller
-This patch corrects this and invokes the callback for both odd and even frame
-for just the Rev02 version of the LCDC (won't find an SGX GPU on a Rev01).
-
-Signed-off-by: Darren Etheridge <detheridge@ti.com>
----
- drivers/video/fbdev/da8xx-fb.c |    4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/video/fbdev/da8xx-fb.c
-+++ b/drivers/video/fbdev/da8xx-fb.c
-@@ -909,6 +909,8 @@ static irqreturn_t lcdc_irq_handler_rev0
- 				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
- 			par->vsync_flag = 1;
- 			wake_up_interruptible(&par->vsync_wait);
-+			if (vsync_cb_handler)
-+				vsync_cb_handler(vsync_cb_arg);
- 		}
- 
- 		/* Set only when controller is disabled and at the end of
-@@ -974,8 +976,6 @@ static irqreturn_t lcdc_irq_handler_rev0
- 				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
- 			par->vsync_flag = 1;
- 			wake_up_interruptible(&par->vsync_wait);
--			if (vsync_cb_handler)
--				vsync_cb_handler(vsync_cb_arg);
- 		}
- 	}
- 
diff --git a/target/linux/omap/patches-3.18/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch b/target/linux/omap/patches-3.18/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch
deleted file mode 100644
index 27b0b6df99..0000000000
--- a/target/linux/omap/patches-3.18/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/arm/boot/dts/am335x-evmsk.dts
-+++ b/arch/arm/boot/dts/am335x-evmsk.dts
-@@ -256,6 +256,39 @@
- 	};
- 
- 
-+	lcd_pins_s0: lcd_pins_s0 {
-+		pinctrl-single,pins = <
-+			0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
-+			0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
-+			0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
-+			0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
-+			0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
-+			0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
-+			0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
-+			0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
-+			0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
-+			0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
-+			0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
-+			0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
-+			0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
-+			0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
-+			0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
-+			0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
-+			0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
-+			0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
-+			0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
-+			0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
-+			0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
-+			0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
-+			0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
-+			0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
-+			0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
-+			0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
-+			0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
-+			0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
-+		>;
-+	};
-+
- 	user_leds_s0: user_leds_s0 {
- 		pinctrl-single,pins = <
- 			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-@@ -665,6 +698,27 @@
- 		rx-num-evt = <32>;
- };
- 
-+&lcdc {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&lcd_pins_s0>;
-+	status = "okay";
-+	display-timings {
-+		480x272 {
-+			hactive         = <480>;
-+			vactive         = <272>;
-+			hback-porch     = <43>;
-+			hfront-porch    = <8>;
-+			hsync-len       = <4>;
-+			vback-porch     = <12>;
-+			vfront-porch    = <4>;
-+			vsync-len       = <10>;
-+			clock-frequency = <9000000>;
-+			hsync-active    = <0>;
-+			vsync-active    = <0>;
-+		};
-+	};
-+};
-+
- &tscadc {
- 	status = "okay";
- 	tsc {
diff --git a/target/linux/omap/patches-3.18/950-am335x-evmsk-wilink-dts.patch b/target/linux/omap/patches-3.18/950-am335x-evmsk-wilink-dts.patch
deleted file mode 100644
index cf0530e53a..0000000000
--- a/target/linux/omap/patches-3.18/950-am335x-evmsk-wilink-dts.patch
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/arch/arm/boot/dts/am335x-evmsk.dts
-+++ b/arch/arm/boot/dts/am335x-evmsk.dts
-@@ -14,6 +14,7 @@
- /dts-v1/;
- 
- #include "am33xx.dtsi"
-+#include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pwm/pwm.h>
- 
- / {
-@@ -26,6 +27,13 @@
- 		};
- 	};
- 
-+	wlan {
-+		compatible = "wlcore";
-+
-+		gpio = <31>;
-+		board-ref-clock = <4>;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x80000000 0x10000000>; /* 256 MB */
-@@ -68,6 +76,16 @@
- 		enable-active-high;
- 	};
- 
-+	vmmc_wl: fixedregulator@2 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vmmc-wl";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
-+		gpio = <&gpio1 29 0>;
-+		startup-delay-us = <70000>;
-+		enable-active-high;
-+	};
-+
- 	leds {
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&user_leds_s0>;
-@@ -445,6 +463,20 @@
- 			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
- 		>;
- 	};
-+
-+	wilink_pins: pinmux_wilink_pins {
-+		pinctrl-single,pins = <
-+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-+			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
-+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-+		>;
-+	};
-+
- };
- 
- &uart0 {
-@@ -682,6 +714,16 @@
- 	pinctrl-0 = <&mmc2_pins>;
- };
- 
-+&mmc2 {
-+	status = "okay";
-+	vmmc-supply = <&vmmc_wl>;
-+	bus-width = <4>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&wilink_pins>;
-+	ti,non-removable;
-+	keep-power-in-suspend;
-+};
-+
- &mcasp1 {
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&mcasp1_pins>;
diff --git a/target/linux/omap/patches-4.1/0334-video-da8xx-fb-adding-dt-support.patch b/target/linux/omap/patches-4.1/0334-video-da8xx-fb-adding-dt-support.patch
deleted file mode 100644
index a778c20890..0000000000
--- a/target/linux/omap/patches-4.1/0334-video-da8xx-fb-adding-dt-support.patch
+++ /dev/null
@@ -1,201 +0,0 @@
-From 884d3962ef4787c8cf0b8a7a673531c623d1dff8 Mon Sep 17 00:00:00 2001
-From: Darren Etheridge <detheridge@ti.com>
-Date: Fri, 2 Aug 2013 15:35:36 -0500
-Subject: [PATCH 334/752] video: da8xx-fb: adding dt support
-
-Enhancing driver to enable probe triggered by a corresponding dt entry.
-
-Add da8xx-fb.txt documentation to devicetree section.
-
-Obtain fb_videomode details for the connected lcd panel using the
-display timing details present in DT.
-
-Ensure that platform data is present before checking whether platform
-callback is present (the one used to control backlight). So far this
-was not an issue as driver was purely non-DT triggered, but now DT
-support has been added this check must be performed.
-
-v2: squashing multiple commits from Afzal Mohammed (afzal@ti.com)
-v3: remove superfluous cast
-v4: expose both ti,am3352-lcdc and ti,da830-lcdc for .compatible
-	as driver can use enhanced features of all version of the
-	silicon block.
-v5: addressed review comments from Prabhakar Lad
-v6: Changed the .compatible naming to match the existing drm bindings
-	for am33xx devices
-v7: clarify which compatible to use in the documentation for DA850
-
-Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
-Signed-off-by: Darren Etheridge <detheridge@ti.com>
----
- .../devicetree/bindings/video/da8xx-fb.txt         |   42 +++++++++++++
- drivers/video/fbdev/da8xx-fb.c                     |   66 +++++++++++++++++++-
- 2 files changed, 105 insertions(+), 3 deletions(-)
- create mode 100644 Documentation/devicetree/bindings/video/da8xx-fb.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/video/da8xx-fb.txt
-@@ -0,0 +1,42 @@
-+TI LCD Controller on DA830/DA850/AM335x SoC's
-+
-+Required properties:
-+- compatible:
-+	DA830, DA850 - "ti,da8xx-tilcdc"
-+	AM335x SoC's - "ti,am33xx-tilcdc"
-+- reg: Address range of lcdc register set
-+- interrupts: lcdc interrupt
-+- display-timings: typical videomode of lcd panel, represented as child.
-+  Refer Documentation/devicetree/bindings/video/display-timing.txt for
-+  display timing binding details. If multiple videomodes are mentioned
-+  in display timings node, typical videomode has to be mentioned as the
-+  native mode or it has to be first child (driver cares only for native
-+  videomode).
-+
-+Recommended properties:
-+- ti,hwmods: Name of the hwmod associated to the LCDC
-+
-+Example for am335x SoC's:
-+
-+lcdc@4830e000 {
-+	compatible = "ti,am33xx-tilcdc";
-+	reg =  <0x4830e000 0x1000>;
-+	interrupts = <36>;
-+	ti,hwmods = "lcdc";
-+	status = "okay";
-+	display-timings {
-+		800x480p62 {
-+			clock-frequency = <30000000>;
-+			hactive = <800>;
-+			vactive = <480>;
-+			hfront-porch = <39>;
-+			hback-porch = <39>;
-+			hsync-len = <47>;
-+			vback-porch = <29>;
-+			vfront-porch = <13>;
-+			vsync-len = <2>;
-+			hsync-active = <1>;
-+			vsync-active = <1>;
-+		};
-+	};
-+};
---- a/drivers/video/fbdev/da8xx-fb.c
-+++ b/drivers/video/fbdev/da8xx-fb.c
-@@ -36,6 +36,7 @@
- #include <linux/slab.h>
- #include <linux/delay.h>
- #include <linux/lcm.h>
-+#include <video/of_display_timing.h>
- #include <video/da8xx-fb.h>
- #include <asm/div64.h>
- 
-@@ -1317,12 +1318,54 @@ static struct fb_ops da8xx_fb_ops = {
- 	.fb_blank = cfb_blank,
- };
- 
-+static struct lcd_ctrl_config *da8xx_fb_create_cfg(struct platform_device *dev)
-+{
-+	struct lcd_ctrl_config *cfg;
-+
-+	cfg = devm_kzalloc(&dev->dev, sizeof(struct fb_videomode), GFP_KERNEL);
-+	if (!cfg)
-+		return NULL;
-+
-+	/* default values */
-+
-+	if (lcd_revision == LCD_VERSION_1)
-+		cfg->bpp = 16;
-+	else
-+		cfg->bpp = 32;
-+
-+	/*
-+	 * For panels so far used with this LCDC, below statement is sufficient.
-+	 * For new panels, if required, struct lcd_ctrl_cfg fields to be updated
-+	 * with additional/modified values. Those values would have to be then
-+	 * obtained from dt(requiring new dt bindings).
-+	 */
-+
-+	cfg->panel_shade = COLOR_ACTIVE;
-+
-+	return cfg;
-+}
-+
- static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
- {
- 	struct da8xx_lcdc_platform_data *fb_pdata = dev_get_platdata(&dev->dev);
- 	struct fb_videomode *lcdc_info;
-+	struct device_node *np = dev->dev.of_node;
- 	int i;
- 
-+	if (np) {
-+		lcdc_info = devm_kzalloc(&dev->dev,
-+					 sizeof(struct fb_videomode),
-+					 GFP_KERNEL);
-+		if (!lcdc_info)
-+			return NULL;
-+
-+		if (of_get_fb_videomode(np, lcdc_info, OF_USE_NATIVE_MODE)) {
-+			dev_err(&dev->dev, "timings not available in DT\n");
-+			return NULL;
-+		}
-+		return lcdc_info;
-+	}
-+
- 	for (i = 0, lcdc_info = known_lcd_panels;
- 		i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) {
- 		if (strcmp(fb_pdata->type, lcdc_info->name) == 0)
-@@ -1351,7 +1394,7 @@ static int fb_probe(struct platform_devi
- 	int ret;
- 	unsigned long ulcm;
- 
--	if (fb_pdata == NULL) {
-+	if (fb_pdata == NULL && !device->dev.of_node) {
- 		dev_err(&device->dev, "Can not get platform data\n");
- 		return -ENOENT;
- 	}
-@@ -1391,7 +1434,10 @@ static int fb_probe(struct platform_devi
- 		break;
- 	}
- 
--	lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
-+	if (device->dev.of_node)
-+		lcd_cfg = da8xx_fb_create_cfg(device);
-+	else
-+		lcd_cfg = fb_pdata->controller_data;
- 
- 	if (!lcd_cfg) {
- 		ret = -EINVAL;
-@@ -1410,7 +1456,7 @@ static int fb_probe(struct platform_devi
- 	par->dev = &device->dev;
- 	par->lcdc_clk = tmp_lcdc_clk;
- 	par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
--	if (fb_pdata->panel_power_ctrl) {
-+	if (fb_pdata && fb_pdata->panel_power_ctrl) {
- 		par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
- 		par->panel_power_ctrl(1);
- 	}
-@@ -1654,11 +1700,25 @@ static int fb_resume(struct device *dev)
- 
- static SIMPLE_DEV_PM_OPS(fb_pm_ops, fb_suspend, fb_resume);
- 
-+#if IS_ENABLED(CONFIG_OF)
-+static const struct of_device_id da8xx_fb_of_match[] = {
-+	/*
-+	 * this driver supports version 1 and version 2 of the
-+	 * Texas Instruments lcd controller (lcdc) hardware block
-+	 */
-+	{.compatible = "ti,da8xx-tilcdc", },
-+	{.compatible = "ti,am33xx-tilcdc", },
-+	{},
-+};
-+MODULE_DEVICE_TABLE(of, da8xx_fb_of_match);
-+#endif
-+
- static struct platform_driver da8xx_fb_driver = {
- 	.probe = fb_probe,
- 	.remove = fb_remove,
- 	.driver = {
- 		   .name = DRIVER_NAME,
-+		   .of_match_table = of_match_ptr(da8xx_fb_of_match),
- 		   .pm	= &fb_pm_ops,
- 		   },
- };
diff --git a/target/linux/omap/patches-4.1/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch b/target/linux/omap/patches-4.1/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch
deleted file mode 100644
index 8c0898a9d6..0000000000
--- a/target/linux/omap/patches-4.1/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 9a1a810516ae9cb3259b898b6879901c5b44fa90 Mon Sep 17 00:00:00 2001
-From: Prathap M S <msprathap@ti.com>
-Date: Mon, 2 Sep 2013 12:05:23 +0530
-Subject: [PATCH 343/752] video: da8xx-fb: Add API to register wait for vsync
- callback
-
-This patch adds APIs to register and unregister wait for vsync callback.
-This is derived from commit id 2d44302545da24fd22912d964102bc31a7489e97
-This commit id was part of 3.2 kernel sources.
-
-Signed-off-by: Prathap M S <msprathap@ti.com>
----
- drivers/video/fbdev/da8xx-fb.c |   33 +++++++++++++++++++++++++++++++++
- include/video/da8xx-fb.h       |    4 ++++
- 2 files changed, 37 insertions(+)
-
---- a/drivers/video/fbdev/da8xx-fb.c
-+++ b/drivers/video/fbdev/da8xx-fb.c
-@@ -197,6 +197,9 @@ static struct fb_fix_screeninfo da8xx_fb
- 	.accel = FB_ACCEL_NONE
- };
- 
-+static vsync_callback_t vsync_cb_handler;
-+static void *vsync_cb_arg;
-+
- static struct fb_videomode known_lcd_panels[] = {
- 	/* Sharp LCD035Q3DG01 */
- 	[0] = {
-@@ -831,6 +834,32 @@ static int lcd_init(struct da8xx_fb_par
- 	return 0;
- }
- 
-+int register_vsync_cb(vsync_callback_t handler, void *arg, int idx)
-+{
-+	if ((vsync_cb_handler == NULL) && (vsync_cb_arg == NULL)) {
-+		vsync_cb_arg = arg;
-+		vsync_cb_handler = handler;
-+	} else {
-+		return -EEXIST;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(register_vsync_cb);
-+
-+int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx)
-+{
-+	if ((vsync_cb_handler == handler) && (vsync_cb_arg == arg)) {
-+		vsync_cb_handler = NULL;
-+		vsync_cb_arg = NULL;
-+	} else {
-+		return -ENXIO;
-+	}
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(unregister_vsync_cb);
-+
- /* IRQ handler for version 2 of LCDC */
- static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg)
- {
-@@ -868,6 +897,8 @@ static irqreturn_t lcdc_irq_handler_rev0
- 				   LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
- 			par->vsync_flag = 1;
- 			wake_up_interruptible(&par->vsync_wait);
-+			if (vsync_cb_handler)
-+				vsync_cb_handler(vsync_cb_arg);
- 		}
- 
- 		if (stat & LCD_END_OF_FRAME1) {
-@@ -943,6 +974,8 @@ static irqreturn_t lcdc_irq_handler_rev0
- 				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
- 			par->vsync_flag = 1;
- 			wake_up_interruptible(&par->vsync_wait);
-+			if (vsync_cb_handler)
-+				vsync_cb_handler(vsync_cb_arg);
- 		}
- 	}
- 
---- a/include/video/da8xx-fb.h
-+++ b/include/video/da8xx-fb.h
-@@ -91,5 +91,9 @@ struct lcd_sync_arg {
- /* Proprietary FB_SYNC_ flags */
- #define FB_SYNC_CLK_INVERT 0x40000000
- 
-+typedef void (*vsync_callback_t)(void *arg);
-+int register_vsync_cb(vsync_callback_t handler, void *arg, int idx);
-+int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx);
-+
- #endif  /* ifndef DA8XX_FB_H */
- 
diff --git a/target/linux/omap/patches-4.1/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch b/target/linux/omap/patches-4.1/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch
deleted file mode 100644
index 6000ef1365..0000000000
--- a/target/linux/omap/patches-4.1/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From c99bd415829ef29adf71bb1e1b577650f10e93f5 Mon Sep 17 00:00:00 2001
-From: Darren Etheridge <detheridge@ti.com>
-Date: Mon, 4 Nov 2013 12:27:40 -0600
-Subject: [PATCH 752/752] video/da8xx-fb fix defect with vsync callback
- invocation
-
-Fix defect where SGX is running at half of the expected framerate.
-The original patch (@ commit ID 9a1a810516ae9cb3259b898b6879901c5b44fa90)
-seems to have a mistake where it only calls the callback
-for the even or the odd frames depending on the revision of the LCD controller
-This patch corrects this and invokes the callback for both odd and even frame
-for just the Rev02 version of the LCDC (won't find an SGX GPU on a Rev01).
-
-Signed-off-by: Darren Etheridge <detheridge@ti.com>
----
- drivers/video/fbdev/da8xx-fb.c |    4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/drivers/video/fbdev/da8xx-fb.c
-+++ b/drivers/video/fbdev/da8xx-fb.c
-@@ -909,6 +909,8 @@ static irqreturn_t lcdc_irq_handler_rev0
- 				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
- 			par->vsync_flag = 1;
- 			wake_up_interruptible(&par->vsync_wait);
-+			if (vsync_cb_handler)
-+				vsync_cb_handler(vsync_cb_arg);
- 		}
- 
- 		/* Set only when controller is disabled and at the end of
-@@ -974,8 +976,6 @@ static irqreturn_t lcdc_irq_handler_rev0
- 				   LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
- 			par->vsync_flag = 1;
- 			wake_up_interruptible(&par->vsync_wait);
--			if (vsync_cb_handler)
--				vsync_cb_handler(vsync_cb_arg);
- 		}
- 	}
- 
diff --git a/target/linux/omap/patches-4.1/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch b/target/linux/omap/patches-4.1/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch
deleted file mode 100644
index 55708a4b03..0000000000
--- a/target/linux/omap/patches-4.1/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/arm/boot/dts/am335x-evmsk.dts
-+++ b/arch/arm/boot/dts/am335x-evmsk.dts
-@@ -257,6 +257,39 @@
- 	};
- 
- 
-+	lcd_pins_s0: lcd_pins_s0 {
-+		pinctrl-single,pins = <
-+			0x20 0x01	/* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
-+			0x24 0x01	/* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
-+			0x28 0x01	/* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
-+			0x2c 0x01	/* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
-+			0x30 0x01	/* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
-+			0x34 0x01	/* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
-+			0x38 0x01	/* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
-+			0x3c 0x01	/* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
-+			0xa0 0x00	/* lcd_data0.lcd_data0, OUTPUT | MODE0 */
-+			0xa4 0x00	/* lcd_data1.lcd_data1, OUTPUT | MODE0 */
-+			0xa8 0x00	/* lcd_data2.lcd_data2, OUTPUT | MODE0 */
-+			0xac 0x00	/* lcd_data3.lcd_data3, OUTPUT | MODE0 */
-+			0xb0 0x00	/* lcd_data4.lcd_data4, OUTPUT | MODE0 */
-+			0xb4 0x00	/* lcd_data5.lcd_data5, OUTPUT | MODE0 */
-+			0xb8 0x00	/* lcd_data6.lcd_data6, OUTPUT | MODE0 */
-+			0xbc 0x00	/* lcd_data7.lcd_data7, OUTPUT | MODE0 */
-+			0xc0 0x00	/* lcd_data8.lcd_data8, OUTPUT | MODE0 */
-+			0xc4 0x00	/* lcd_data9.lcd_data9, OUTPUT | MODE0 */
-+			0xc8 0x00	/* lcd_data10.lcd_data10, OUTPUT | MODE0 */
-+			0xcc 0x00	/* lcd_data11.lcd_data11, OUTPUT | MODE0 */
-+			0xd0 0x00	/* lcd_data12.lcd_data12, OUTPUT | MODE0 */
-+			0xd4 0x00	/* lcd_data13.lcd_data13, OUTPUT | MODE0 */
-+			0xd8 0x00	/* lcd_data14.lcd_data14, OUTPUT | MODE0 */
-+			0xdc 0x00	/* lcd_data15.lcd_data15, OUTPUT | MODE0 */
-+			0xe0 0x00	/* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
-+			0xe4 0x00	/* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
-+			0xe8 0x00	/* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
-+			0xec 0x00	/* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
-+		>;
-+	};
-+
- 	user_leds_s0: user_leds_s0 {
- 		pinctrl-single,pins = <
- 			0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7)	/* gpmc_ad4.gpio1_4 */
-@@ -676,6 +709,27 @@
- 		rx-num-evt = <32>;
- };
- 
-+&lcdc {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&lcd_pins_s0>;
-+	status = "okay";
-+	display-timings {
-+		480x272 {
-+			hactive         = <480>;
-+			vactive         = <272>;
-+			hback-porch     = <43>;
-+			hfront-porch    = <8>;
-+			hsync-len       = <4>;
-+			vback-porch     = <12>;
-+			vfront-porch    = <4>;
-+			vsync-len       = <10>;
-+			clock-frequency = <9000000>;
-+			hsync-active    = <0>;
-+			vsync-active    = <0>;
-+		};
-+	};
-+};
-+
- &tscadc {
- 	status = "okay";
- 	tsc {
diff --git a/target/linux/omap/patches-4.1/950-am335x-evmsk-wilink-dts.patch b/target/linux/omap/patches-4.1/950-am335x-evmsk-wilink-dts.patch
deleted file mode 100644
index 1b1f9d44c0..0000000000
--- a/target/linux/omap/patches-4.1/950-am335x-evmsk-wilink-dts.patch
+++ /dev/null
@@ -1,79 +0,0 @@
---- a/arch/arm/boot/dts/am335x-evmsk.dts
-+++ b/arch/arm/boot/dts/am335x-evmsk.dts
-@@ -14,6 +14,7 @@
- /dts-v1/;
- 
- #include "am33xx.dtsi"
-+#include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pwm/pwm.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- 
-@@ -27,6 +28,13 @@
- 		};
- 	};
- 
-+	wlan {
-+		compatible = "wlcore";
-+
-+		gpio = <31>;
-+		board-ref-clock = <4>;
-+	};
-+
- 	memory {
- 		device_type = "memory";
- 		reg = <0x80000000 0x10000000>; /* 256 MB */
-@@ -69,6 +77,16 @@
- 		enable-active-high;
- 	};
- 
-+	vmmc_wl: fixedregulator@2 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "vmmc-wl";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
-+		gpio = <&gpio1 29 0>;
-+		startup-delay-us = <70000>;
-+		enable-active-high;
-+	};
-+
- 	leds {
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&user_leds_s0>;
-@@ -446,6 +464,20 @@
- 			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
- 		>;
- 	};
-+
-+	wilink_pins: pinmux_wilink_pins {
-+		pinctrl-single,pins = <
-+			0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
-+			0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
-+			0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
-+			0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
-+			0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
-+			0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
-+			0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
-+			0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
-+		>;
-+	};
-+
- };
- 
- &uart0 {
-@@ -693,6 +725,16 @@
- 	};
- };
- 
-+&mmc2 {
-+	status = "okay";
-+	vmmc-supply = <&vmmc_wl>;
-+	bus-width = <4>;
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&wilink_pins>;
-+	ti,non-removable;
-+	keep-power-in-suspend;
-+};
-+
- &mcasp1 {
- 		pinctrl-names = "default";
- 		pinctrl-0 = <&mcasp1_pins>;