aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorJoe Mullally <jwmullally@gmail.com>2021-08-30 22:35:05 +0100
committerDaniel Golle <daniel@makrotopia.org>2022-04-10 16:26:01 +0100
commit85d581a64bfaea634503002db1827848f4c188c9 (patch)
treea5a64a9ee8bd78593d1703e16baa17d4466e0537 /target
parentd118e57b35bac5e607845d83dee98c31ee95cc14 (diff)
downloadupstream-85d581a64bfaea634503002db1827848f4c188c9.tar.gz
upstream-85d581a64bfaea634503002db1827848f4c188c9.tar.bz2
upstream-85d581a64bfaea634503002db1827848f4c188c9.zip
ath79: Move TPLink WPA8630Pv2 to ath79-tiny target
These devices only have 6MiB available for firmware, which is not enough for recent release images, so move these to the tiny target. Note for users sysupgrading from the previous ath79-generic snapshot images: The tiny target kernel has a 4Kb flash erase block size instead of the generic target's 64kb. This means the JFFS2 overlay partition containing settings must be reformatted with the new block size or else there will be data corruption. To do this, backup your settings before upgrading, then during the sysupgrade, de-select "Keep Settings". On the CLI, use "sysupgrade -n". If you forget to do this and your system becomes unstable after upgrading, you can do this to format the partition and recover: * Reboot * Press RESET when Power LED blinks during boot to enter Failsafe mode * SSH to 192.168.1.1 * Run "firstboot" and reboot Signed-off-by: Joe Mullally <jwmullally@gmail.com> Tested-by: Robert Högberg <robert.hogberg@gmail.com> (cherry picked from commit 44e1e5d153d00915a7e516c9af3f440cbd84cf78)
Diffstat (limited to 'target')
-rw-r--r--target/linux/ath79/generic/base-files/etc/board.d/01_leds5
-rw-r--r--target/linux/ath79/generic/base-files/etc/board.d/02_network5
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata5
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk30
-rw-r--r--target/linux/ath79/image/tiny-tp-link.mk35
-rw-r--r--target/linux/ath79/tiny/base-files/etc/board.d/01_leds5
-rw-r--r--target/linux/ath79/tiny/base-files/etc/board.d/02_network7
-rw-r--r--target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version20
-rw-r--r--target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata25
9 files changed, 95 insertions, 42 deletions
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 2ce489b0d1..e22cee51a3 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -401,10 +401,7 @@ tplink,tl-mr6400-v1)
ucidef_set_led_netdev "wan" "WAN" "white:wan" "eth1"
ucidef_set_led_netdev "4g" "4G" "white:4g" "usb0"
;;
-tplink,tl-wpa8630-v1|\
-tplink,tl-wpa8630p-v2-int|\
-tplink,tl-wpa8630p-v2.0-eu|\
-tplink,tl-wpa8630p-v2.1-eu)
+tplink,tl-wpa8630-v1)
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c"
;;
tplink,tl-wr841hp-v2|\
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index bc32081910..2f0208b288 100644
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -440,10 +440,7 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "2:lan:3" "3:lan:2"
;;
- tplink,tl-wpa8630-v1|\
- tplink,tl-wpa8630p-v2-int|\
- tplink,tl-wpa8630p-v2.0-eu|\
- tplink,tl-wpa8630p-v2.1-eu)
+ tplink,tl-wpa8630-v1)
# port 5 (internal) is the power-line port
ucidef_add_switch "switch0" \
"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index b8e99a661f..348b8839b6 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -249,10 +249,7 @@ case "$FIRMWARE" in
;;
tplink,eap225-outdoor-v1|\
tplink,eap225-v3|\
- tplink,eap225-wall-v2|\
- tplink,tl-wpa8630p-v2-int|\
- tplink,tl-wpa8630p-v2.0-eu|\
- tplink,tl-wpa8630p-v2.1-eu)
+ tplink,eap225-wall-v2)
caldata_extract "art" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 37a0fcc169..6479f6e26a 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -640,36 +640,6 @@ define Device/tplink_tl-wpa8630-v1
endef
TARGET_DEVICES += tplink_tl-wpa8630-v1
-define Device/tplink_tl-wpa8630p-v2
- $(Device/tplink-safeloader)
- SOC := qca9563
- DEVICE_MODEL := TL-WPA8630P
- IMAGE_SIZE := 6016k
- DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
-endef
-
-define Device/tplink_tl-wpa8630p-v2-int
- $(Device/tplink_tl-wpa8630p-v2)
- DEVICE_VARIANT := v2 (Int.)
- TPLINK_BOARD_ID := TL-WPA8630P-V2-INT
-endef
-TARGET_DEVICES += tplink_tl-wpa8630p-v2-int
-
-define Device/tplink_tl-wpa8630p-v2.0-eu
- $(Device/tplink_tl-wpa8630p-v2)
- DEVICE_VARIANT := v2.0 (EU)
- TPLINK_BOARD_ID := TL-WPA8630P-V2.0-EU
- SUPPORTED_DEVICES += tplink,tl-wpa8630p-v2-eu
-endef
-TARGET_DEVICES += tplink_tl-wpa8630p-v2.0-eu
-
-define Device/tplink_tl-wpa8630p-v2.1-eu
- $(Device/tplink_tl-wpa8630p-v2)
- DEVICE_VARIANT := v2.1 (EU)
- TPLINK_BOARD_ID := TL-WPA8630P-V2.1-EU
-endef
-TARGET_DEVICES += tplink_tl-wpa8630p-v2.1-eu
-
define Device/tplink_tl-wr1043nd-v1
$(Device/tplink-8m)
SOC := ar9132
diff --git a/target/linux/ath79/image/tiny-tp-link.mk b/target/linux/ath79/image/tiny-tp-link.mk
index c918c6baa6..2110f08b52 100644
--- a/target/linux/ath79/image/tiny-tp-link.mk
+++ b/target/linux/ath79/image/tiny-tp-link.mk
@@ -223,6 +223,41 @@ define Device/tplink_tl-wa901nd-v5
endef
TARGET_DEVICES += tplink_tl-wa901nd-v5
+define Device/tplink_tl-wpa8630p-v2
+ $(Device/tplink-safeloader)
+ SOC := qca9563
+ DEVICE_MODEL := TL-WPA8630P
+ IMAGE_SIZE := 6016k
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
+ DEVICE_COMPAT_VERSION := 2.0
+ DEVICE_COMPAT_MESSAGE := The flash erase blocksize has changed to 4k from the 64k in previous versions, \
+ so the JFFS2 settings partition MUST be reformatted to avoid data corruption. \
+ Backup your settings before upgrading, then during sysupgrade, \
+ de-select "Keep settings" and select "Force" to continue (equivilant to "sysupgrade -n -F").
+endef
+
+define Device/tplink_tl-wpa8630p-v2-int
+ $(Device/tplink_tl-wpa8630p-v2)
+ DEVICE_VARIANT := v2 (Int.)
+ TPLINK_BOARD_ID := TL-WPA8630P-V2-INT
+endef
+TARGET_DEVICES += tplink_tl-wpa8630p-v2-int
+
+define Device/tplink_tl-wpa8630p-v2.0-eu
+ $(Device/tplink_tl-wpa8630p-v2)
+ DEVICE_VARIANT := v2.0 (EU)
+ TPLINK_BOARD_ID := TL-WPA8630P-V2.0-EU
+ SUPPORTED_DEVICES += tplink,tl-wpa8630p-v2-eu
+endef
+TARGET_DEVICES += tplink_tl-wpa8630p-v2.0-eu
+
+define Device/tplink_tl-wpa8630p-v2.1-eu
+ $(Device/tplink_tl-wpa8630p-v2)
+ DEVICE_VARIANT := v2.1 (EU)
+ TPLINK_BOARD_ID := TL-WPA8630P-V2.1-EU
+endef
+TARGET_DEVICES += tplink_tl-wpa8630p-v2.1-eu
+
define Device/tplink_tl-wr703n
$(Device/tplink-4mlzma)
SOC := ar9331
diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
index 72df8b3dea..f705c5c718 100644
--- a/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/01_leds
@@ -93,6 +93,11 @@ tplink,tl-wa850re-v2)
ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "blue:signal4" "wlan0" "60" "100"
ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "blue:signal5" "wlan0" "80" "100"
;;
+tplink,tl-wpa8630p-v2-int|\
+tplink,tl-wpa8630p-v2.0-eu|\
+tplink,tl-wpa8630p-v2.1-eu)
+ ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x3c"
+ ;;
tplink,tl-wr940n-v3|\
tplink,tl-wr940n-v4|\
tplink,tl-wr941nd-v6)
diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/02_network b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
index 45335c7c89..77b2444819 100644
--- a/target/linux/ath79/tiny/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/02_network
@@ -82,6 +82,13 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
;;
+ tplink,tl-wpa8630p-v2-int|\
+ tplink,tl-wpa8630p-v2.0-eu|\
+ tplink,tl-wpa8630p-v2.1-eu)
+ # port 5 (internal) is the power-line port
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "5:lan:4"
+ ;;
tplink,tl-wr941-v2)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
diff --git a/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version b/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version
new file mode 100644
index 0000000000..b6c2ae48f7
--- /dev/null
+++ b/target/linux/ath79/tiny/base-files/etc/board.d/05_compat-version
@@ -0,0 +1,20 @@
+#
+# Copyright (C) 2020 OpenWrt.org
+#
+
+. /lib/functions.sh
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+case "$(board_name)" in
+ tplink,tl-wpa8630p-v2-int|\
+ tplink,tl-wpa8630p-v2.0-eu|\
+ tplink,tl-wpa8630p-v2.1-eu)
+ ucidef_set_compat_version "2.0"
+ ;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
new file mode 100644
index 0000000000..8e3e142ec9
--- /dev/null
+++ b/target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -0,0 +1,25 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath10k/pre-cal-pci-0000:00:00.0.bin")
+ case $board in
+ tplink,tl-wpa8630p-v2-int|\
+ tplink,tl-wpa8630p-v2.0-eu|\
+ tplink,tl-wpa8630p-v2.1-eu)
+ caldata_extract "art" 0x5000 0x2f20
+ ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary info 0x8) 1)
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ ;;
+ esac
+ ;;
+*)
+ exit 1
+ ;;
+esac