kirkwood: drop 4.3 support

Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>

SVN-Revision: 48499

10 files changed, 0 insertions, 1339 deletions

diff --git a/target/linux/kirkwood/config-4.3 b/target/linux/kirkwood/config-4.3
deleted file mode 100644
index 1e68af5acf..0000000000
--- a/target/linux/kirkwood/config-4.3
+++ /dev/null
@@ -1,318 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_CPU_AUTO=y
-# CONFIG_ARCH_MULTI_V4 is not set
-# CONFIG_ARCH_MULTI_V4T is not set
-CONFIG_ARCH_MULTI_V4_V5=y
-CONFIG_ARCH_MULTI_V5=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
-# CONFIG_ARM_CPUIDLE is not set
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_HAS_SG_CHAIN=y
-# CONFIG_ARM_KIRKWOOD_CPUIDLE is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-# CONFIG_ARM_MVEBU_V7_CPUIDLE is not set
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CACHE_FEROCEON_L2=y
-# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="rootdelay=1 root=/dev/mmcblk0p1 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_FEROCEON=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FEROCEON=y
-# CONFIG_CPU_FEROCEON_OLD_ID is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_TLB_FEROCEON=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0=y
-# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xf1012000
-CONFIG_DEBUG_UART_VIRT=0xfed12000
-CONFIG_DEBUG_UNCOMPRESS=y
-# CONFIG_DEBUG_USER is not set
-# CONFIG_DLCI is not set
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-# CONFIG_EARLY_PRINTK is not set
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXT4_FS=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZ4=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HW_RANDOM=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KIRKWOOD_CLK=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_NETXBIG=y
-CONFIG_LEDS_NS2=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_LIBFDT=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
-CONFIG_MACH_KIRKWOOD=y
-CONFIG_MACH_MVEBU_ANY=y
-# CONFIG_MACH_NETXBIG is not set
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_ORION=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MV643XX_ETH=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-# CONFIG_MVNETA is not set
-CONFIG_MVSW61XX_PHY=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_KUSER_HELPERS=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_IRQCHIP=y
-CONFIG_ORION_TIMER=y
-CONFIG_OUTER_CACHE=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-# CONFIG_PCI_DOMAINS_GENERIC is not set
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHY_MVEBU_SATA=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_KIRKWOOD=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PLAT_ORION=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-# CONFIG_POWER_RESET_QNAP is not set
-CONFIG_POWER_SUPPLY=y
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_REGMAP=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_MV is not set
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCSI=y
-CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_SG_SPLIT is not set
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_ORION=y
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SRCU=y
-# CONFIG_SUNXI_SRAM is not set
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_UBIFS_FS_LZO=y
-# CONFIG_UBIFS_FS_XZ is not set
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_ORION=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-CONFIG_USB_EHCI_PCI=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFP is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WAN=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/kirkwood/patches-4.3/100-find_active_root.patch b/target/linux/kirkwood/patches-4.3/100-find_active_root.patch
deleted file mode 100644
index e32b6089d1..0000000000
--- a/target/linux/kirkwood/patches-4.3/100-find_active_root.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d
- 	return of_get_property(pp, "compatible", NULL);
- }
- 
-+static int mangled_rootblock;
-+
- static int parse_ofpart_partitions(struct mtd_info *master,
- 				   struct mtd_partition **pparts,
- 				   struct mtd_part_parser_data *data)
- {
- 	struct device_node *node;
- 	const char *partname;
-+	const char *owrtpart = "ubi";
- 	struct device_node *pp;
- 	int nr_parts, i;
- 
-@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc
- 		(*pparts)[i].offset = of_read_number(reg, a_cells);
- 		(*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
- 
--		partname = of_get_property(pp, "label", &len);
--		if (!partname)
--			partname = of_get_property(pp, "name", &len);
-+		if (mangled_rootblock && (i == mangled_rootblock)) {
-+				partname = owrtpart;
-+		} else {
-+			partname = of_get_property(pp, "label", &len);
-+
-+			if (!partname)
-+				partname = of_get_property(pp, "name", &len);
-+		}
-+
- 		(*pparts)[i].name = partname;
- 
- 		if (of_get_property(pp, "read-only", &len))
-@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi
- 	return 0;
- }
- 
-+static int __init active_root(char *str)
-+{
-+	get_option(&str, &mangled_rootblock);
-+
-+	if (!mangled_rootblock)
-+		return 1;
-+
-+	return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- 	deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/kirkwood/patches-4.3/110-ib62x0.patch b/target/linux/kirkwood/patches-4.3/110-ib62x0.patch
deleted file mode 100644
index 153c41b782..0000000000
--- a/target/linux/kirkwood/patches-4.3/110-ib62x0.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
-+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
-@@ -117,13 +117,13 @@
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x600000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@700000 {
-+	partition@200000 {
- 		label = "root";
--		reg = <0x0700000 0xf900000>;
-+		reg = <0x200000 0xfe00000>;
- 	};
- 
- };
diff --git a/target/linux/kirkwood/patches-4.3/120-iconnect.patch b/target/linux/kirkwood/patches-4.3/120-iconnect.patch
deleted file mode 100644
index c95579d793..0000000000
--- a/target/linux/kirkwood/patches-4.3/120-iconnect.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-iconnect.dts
-+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -155,28 +155,23 @@
- 	status = "okay";
- 
- 	partition@0 {
--		label = "uboot";
--		reg = <0x0000000 0xc0000>;
-+		label = "u-boot";
-+		reg = <0x0000000 0xe0000>;
- 	};
- 
--	partition@a0000 {
--		label = "env";
--		reg = <0xa0000 0x20000>;
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
- 	};
- 
- 	partition@100000 {
--		label = "zImage";
--		reg = <0x100000 0x300000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@540000 {
--		label = "initrd";
--		reg = <0x540000 0x300000>;
--	};
--
--	partition@980000 {
--		label = "boot";
--		reg = <0x980000 0x1f400000>;
-+	partition@200000 {
-+		label = "root";
-+		reg = <0x200000 0x1fe00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-4.3/130-dockstar.patch b/target/linux/kirkwood/patches-4.3/130-dockstar.patch
deleted file mode 100644
index b1ad669283..0000000000
--- a/target/linux/kirkwood/patches-4.3/130-dockstar.patch
+++ /dev/null
@@ -1,32 +0,0 @@
---- a/arch/arm/boot/dts/kirkwood-dockstar.dts
-+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
-@@ -77,18 +77,22 @@
- 
- 	partition@0 {
- 		label = "u-boot";
--		reg = <0x0000000 0x100000>;
--		read-only;
-+		reg = <0x0000000 0xe0000>;
-+	};
-+
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
- 	};
- 
- 	partition@100000 {
--		label = "uImage";
--		reg = <0x0100000 0x400000>;
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
- 	};
- 
--	partition@500000 {
--		label = "data";
--		reg = <0x0500000 0xfb00000>;
-+	partition@200000 {
-+		label = "root";
-+		reg = <0x200000 0xfe00000>;
- 	};
- };
- 
diff --git a/target/linux/kirkwood/patches-4.3/140-ea4500.patch b/target/linux/kirkwood/patches-4.3/140-ea4500.patch
deleted file mode 100644
index d1a97264eb..0000000000
--- a/target/linux/kirkwood/patches-4.3/140-ea4500.patch
+++ /dev/null
@@ -1,200 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -176,6 +176,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-is2.dtb \
- 	kirkwood-km_kirkwood.dtb \
- 	kirkwood-laplug.dtb \
-+	kirkwood-linksys-viper.dtb \
- 	kirkwood-lschlv2.dtb \
- 	kirkwood-lswvl.dtb \
- 	kirkwood-lswxl.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-@@ -0,0 +1,187 @@
-+/*
-+ * kirkwood-linksys-viper.dts - Device Tree file for Linksys EA4500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+	model = "Linksys E4200v2 / EA4500";
-+	compatible = "linksys,viper", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x8000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+	};
-+
-+	mbus {
-+		pcie-controller {
-+			status = "okay";
-+
-+			pcie@1,0 {
-+				status = "okay";
-+			};
-+
-+			pcie@2,0 {
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pmx_led_white_health: pmx-led-white-health {
-+				marvell,pins = "mpp7";
-+				marvell,function = "gpo";
-+			};
-+			pmx_led_white_pulse: pmx-led-white-pulse {
-+				marvell,pins = "mpp14";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_wps: pmx-btn-wps {
-+				marvell,pins = "mpp47";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_reset: pmx-btn-reset {
-+				marvell,pins = "mpp48";
-+				marvell,function = "gpio";
-+			};
-+		};
-+
-+		rtc@10300 {
-+			status = "disabled";
-+		};
-+
-+		serial@12000 {
-+			status = "okay";
-+		};
-+
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+		pinctrl-names = "default";
-+
-+		button@15 {
-+			label = "WPS Button";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		button@16 {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
-+		pinctrl-names = "default";
-+
-+		white-health {
-+			label = "viper:white:health";
-+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		white-pulse {
-+			label = "viper:white:pulse";
-+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	mvsw61xx {
-+		compatible = "marvell,88e6171";
-+		status = "okay";
-+		reg = <0x10>;
-+
-+		mii-bus = <&mdio>;
-+		cpu-port-0 = <5>;
-+		cpu-port-1 = <6>;
-+		is-indirect;
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	pinctrl-0 = <&pmx_nand>;
-+	pinctrl-names = "default";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0 0x80000>;
-+	};
-+
-+	partition@80000 {
-+		label = "u_env";
-+		reg = <0x80000 0x20000>;
-+	};
-+
-+	partition@a0000 {
-+		label = "s_env";
-+		reg = <0xa0000 0x20000>;
-+	};
-+
-+	partition@200000 {
-+		label = "kernel1";
-+		reg = <0x200000 0x1a00000>;
-+	};
-+
-+	partition@4a0000 {
-+		label = "rootfs1";
-+		reg = <0x4a0000 0x1760000>;
-+	};
-+
-+	partition@1c00000 {
-+		label = "kernel2";
-+		reg = <0x1c00000 0x1a00000>;
-+	};
-+
-+	partition@1ea0000 {
-+		label = "rootfs2";
-+		reg = <0x1ea0000 0x1760000>;
-+	};
-+
-+	partition@3600000 {
-+		label = "syscfg";
-+		reg = <0x3600000 0x4a00000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+};
-+
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
-+
-+&eth1 {
-+	status = "okay";
-+	ethernet1-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
diff --git a/target/linux/kirkwood/patches-4.3/150-ea3500.patch b/target/linux/kirkwood/patches-4.3/150-ea3500.patch
deleted file mode 100644
index a30ade13d0..0000000000
--- a/target/linux/kirkwood/patches-4.3/150-ea3500.patch
+++ /dev/null
@@ -1,192 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -176,6 +176,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-is2.dtb \
- 	kirkwood-km_kirkwood.dtb \
- 	kirkwood-laplug.dtb \
-+	kirkwood-linksys-audi.dtb \
- 	kirkwood-linksys-viper.dtb \
- 	kirkwood-lschlv2.dtb \
- 	kirkwood-lswvl.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
-@@ -0,0 +1,179 @@
-+/*
-+ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
-+ *
-+ * (c) 2013 Jonas Gorski <jogo@openwrt.org>
-+ * (c) 2013 Deutsche Telekom Innovation Laboratories
-+ * (c) 2014 Luka Perkov <luka@openwrt.org>
-+ * (c) 2014 Dan Walters <dan@walters.io>
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6282.dtsi"
-+
-+/ {
-+	model = "Linksys EA3500";
-+	compatible = "linksys,audi", "marvell,kirkwood-88f6282", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x4000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+	};
-+
-+	mbus {
-+		pcie-controller {
-+			status = "okay";
-+
-+			pcie@1,0 {
-+				status = "okay";
-+			};
-+
-+			pcie@2,0 {
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pmx_led_green_power: pmx-led-green-power {
-+				marvell,pins = "mpp7";
-+				marvell,function = "gpo";
-+			};
-+			pmx_btn_wps: pmx-btn-wps {
-+				marvell,pins = "mpp47";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_reset: pmx-btn-reset {
-+				marvell,pins = "mpp48";
-+				marvell,function = "gpio";
-+			};
-+		};
-+
-+		rtc@10300 {
-+			status = "disabled";
-+		};
-+
-+		serial@12000 {
-+			status = "okay";
-+		};
-+
-+	};
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >;
-+		pinctrl-names = "default";
-+
-+		button@15 {
-+			label = "WPS Button";
-+			linux,code = <KEY_WPS_BUTTON>;
-+			gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
-+		};
-+
-+		button@16 {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = < &pmx_led_green_power >;
-+		pinctrl-names = "default";
-+
-+		green-power {
-+			label = "audi:green:power";
-+			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	mvsw61xx {
-+		compatible = "marvell,88e6171";
-+		status = "okay";
-+		reg = <0x10>;
-+
-+		mii-bus = <&mdio>;
-+		cpu-port-0 = <5>;
-+		cpu-port-1 = <6>;
-+		is-indirect;
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	pinctrl-0 = <&pmx_nand>;
-+	pinctrl-names = "default";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0 0x80000>;
-+	};
-+
-+	partition@80000 {
-+		label = "u_env";
-+		reg = <0x80000 0x4000>;
-+	};
-+
-+	partition@84000 {
-+		label = "s_env";
-+		reg = <0x84000 0x4000>;
-+	};
-+
-+	partition@200000 {
-+		label = "kernel1";
-+		reg = <0x200000 0x1400000>;
-+	};
-+
-+	partition@490000 {
-+		label = "rootfs1";
-+		reg = <0x490000 0x1170000>;
-+	};
-+
-+	partition@1600000 {
-+		label = "kernel2";
-+		reg = <0x1600000 0x1400000>;
-+	};
-+
-+	partition@1890000 {
-+		label = "rootfs2";
-+		reg = <0x1890000 0x1170000>;
-+	};
-+
-+	partition@2a00000 {
-+		label = "syscfg";
-+		reg = <0x2a00000  0x1600000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+};
-+
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
-+
-+&eth1 {
-+	status = "okay";
-+	ethernet1-port@0 {
-+		speed = <1000>;
-+		duplex = <1>;
-+	};
-+};
diff --git a/target/linux/kirkwood/patches-4.3/160-goflexhome.patch b/target/linux/kirkwood/patches-4.3/160-goflexhome.patch
deleted file mode 100644
index a4307c73b0..0000000000
--- a/target/linux/kirkwood/patches-4.3/160-goflexhome.patch
+++ /dev/null
@@ -1,140 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -168,6 +168,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-ds411.dtb \
- 	kirkwood-ds411j.dtb \
- 	kirkwood-ds411slim.dtb \
-+	kirkwood-goflexhome.dtb \
- 	kirkwood-goflexnet.dtb \
- 	kirkwood-guruplug-server-plus.dtb \
- 	kirkwood-ib62x0.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
-@@ -0,0 +1,127 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+	model = "Seagate GoFlex Home";
-+	compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x8000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10";
-+		stdout-path = &uart0;
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pmx_usb_power_enable: pmx-usb-power-enable {
-+				marvell,pins = "mpp29";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_white: pmx-led-white {
-+				marvell,pins = "mpp40";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_green: pmx-led_green {
-+				marvell,pins = "mpp46";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_orange: pmx-led-orange {
-+				marvell,pins = "mpp47";
-+				marvell,function = "gpio";
-+			};
-+		};
-+		serial@12000 {
-+			status = "ok";
-+		};
-+
-+		sata@80000 {
-+			status = "okay";
-+			nr-ports = <2>;
-+		};
-+
-+	};
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+
-+		health {
-+			label = "status:green:health";
-+			gpios = <&gpio1 14 1>;
-+			linux,default-trigger = "default-on";
-+		};
-+		fault {
-+			label = "status:orange:fault";
-+			gpios = <&gpio1 15 1>;
-+		};
-+		misc {
-+			label = "status:white:misc";
-+			gpios = <&gpio1 8 1>;
-+			linux,default-trigger = "ide-disk";
-+		};
-+	};
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = <&pmx_usb_power_enable>;
-+		pinctrl-names = "default";
-+
-+		usb_power: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "USB Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			enable-active-high;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+};
-+
-+&nand {
-+	chip-delay = <40>;
-+	status = "okay";
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0000000 0x100000>;
-+		read-only;
-+	};
-+
-+	partition@100000 {
-+		label = "uImage";
-+		reg = <0x0100000 0x400000>;
-+	};
-+
-+	partition@500000 {
-+		label = "pogoplug";
-+		reg = <0x0500000 0x2000000>;
-+	};
-+
-+	partition@2500000 {
-+		label = "root";
-+		reg = <0x02500000 0xd800000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+
-+	ethphy0: ethernet-phy@0 {
-+		reg = <0>;
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+	};
-+};
diff --git a/target/linux/kirkwood/patches-4.3/170-nsa310s.patch b/target/linux/kirkwood/patches-4.3/170-nsa310s.patch
deleted file mode 100644
index c15aacfa4c..0000000000
--- a/target/linux/kirkwood/patches-4.3/170-nsa310s.patch
+++ /dev/null
@@ -1,300 +0,0 @@
---- /dev/null
-+++ b/arch/arm/boot/dts/kirkwood-nsa310s.dts
-@@ -0,0 +1,287 @@
-+/dts-v1/;
-+
-+#include "kirkwood.dtsi"
-+#include "kirkwood-6281.dtsi"
-+
-+/ {
-+	model = "ZyXEL NSA310S";
-+	compatible = "zyxel,nsa310s", "marvell,kirkwood-88f6702", "marvell,kirkwood";
-+
-+	memory {
-+		device_type = "memory";
-+		reg = <0x00000000 0x10000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "console=ttyS0,115200n8 earlyprintk";
-+		stdout-path = &uart0;
-+	};
-+
-+	mbus {
-+		pcie-controller {
-+			status = "okay";
-+
-+			pcie@1,0 {
-+				status = "okay";
-+			};
-+		};
-+	};
-+
-+	ocp@f1000000 {
-+		pinctrl: pin-controller@10000 {
-+			pinctrl-names = "default";
-+
-+			pmx_sata0: pmx-sata0 {
-+				marvell,pins;
-+				marvell,function = "sata0";
-+			};
-+			pmx_sata1: pmx-sata1 {
-+				marvell,pins;
-+				marvell,function = "sata1";
-+			};
-+			pmx_usb_power: pmx-usb-power {
-+				marvell,pins = "mpp21";
-+				marvell,function = "gpio";
-+			};
-+			pmx_pwr_off: pmx-pwr-off {
-+				marvell,pins = "mpp27";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_reset: pmx-btn-reset {
-+				marvell,pins = "mpp24";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_copy: pmx-btn-copy {
-+				marvell,pins = "mpp25";
-+				marvell,function = "gpio";
-+			};
-+			pmx_btn_power: pmx-btn-power {
-+				marvell,pins = "mpp26";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_hdd2_green: pmx-led-hdd2-green {
-+				marvell,pins = "mpp34";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_hdd2_red: pmx-led-hdd2-red {
-+				marvell,pins = "mpp12";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_usb_green: pmx-led-usb-green {
-+				marvell,pins = "mpp15";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_copy_green: pmx-led-copy-green {
-+				marvell,pins = "mpp22";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_copy_red: pmx-led-copy-red {
-+				marvell,pins = "mpp23";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_sys_green: pmx-led-sys-green {
-+				marvell,pins = "mpp28";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_sys_orange: pmx-led-sys-orange {
-+				marvell,pins = "mpp29";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_hdd1_green: pmx-led-hdd1-green {
-+				marvell,pins = "mpp16";
-+				marvell,function = "gpio";
-+			};
-+			pmx_led_hdd1_red: pmx-led-hdd1-red {
-+				marvell,pins = "mpp13";
-+				marvell,function = "gpio";
-+			};
-+			pmx_pwr_sata1: pmx-pwr-sata1 {
-+				marvell,pins = "mpp33";
-+				marvell,function = "gpio";
-+			};
-+		};
-+
-+		serial@12000 {
-+			status = "okay";
-+		};
-+
-+		sata@80000 {
-+			status = "okay";
-+			nr-ports = <2>;
-+		};
-+
-+		rtc@10300 {
-+			status = "disabled";
-+		};
-+
-+		i2c@11000 {
-+			status = "okay";
-+			ht1382: rtc@68 {
-+				compatible = "htk,ht1382";
-+				reg = <0x68>;
-+			};
-+		};
-+	};
-+
-+	regulators {
-+		compatible = "simple-bus";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&pmx_usb_power &pmx_pwr_sata1>;
-+
-+		usb0_power: regulator@1 {
-+			compatible = "regulator-fixed";
-+			reg = <1>;
-+			regulator-name = "USB Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			enable-active-high;
-+			gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>;
-+		};
-+
-+		sata1_power: regulator@2 {
-+			compatible = "regulator-fixed";
-+			reg = <2>;
-+			regulator-name = "SATA1 Power";
-+			regulator-min-microvolt = <5000000>;
-+			regulator-max-microvolt = <5000000>;
-+			regulator-always-on;
-+			regulator-boot-on;
-+			enable-active-high;
-+			gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+
-+	gpio_keys {
-+		compatible = "gpio-keys";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>;
-+		pinctrl-names = "default";
-+
-+		button@1 {
-+			label = "Power Button";
-+			linux,code = <KEY_POWER>;
-+			gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
-+		};
-+		button@2 {
-+			label = "Copy Button";
-+			linux,code = <KEY_COPY>;
-+			gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
-+		};
-+		button@3 {
-+			label = "Reset Button";
-+			linux,code = <KEY_RESTART>;
-+			gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = <&pmx_led_hdd2_green &pmx_led_hdd2_red
-+				&pmx_led_usb_green
-+				&pmx_led_sys_green &pmx_led_sys_orange
-+				&pmx_led_copy_green &pmx_led_copy_red
-+				&pmx_led_hdd1_green &pmx_led_hdd1_red>;
-+		pinctrl-names = "default";
-+
-+		green-sys {
-+			label = "nsa310s:green:sys";
-+			gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "timer";
-+		};
-+		orange-sys {
-+			label = "nsa310s:orange:sys";
-+			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-hdd1 {
-+			label = "nsa310s:green:hdd1";
-+			gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-hdd1 {
-+			label = "nsa310s:red:hdd1";
-+			gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-hdd2 {
-+			label = "nsa310s:green:hdd2";
-+			gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-+		};
-+		red-hdd2 {
-+			label = "nsa310s:red:hdd2";
-+			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-usb {
-+			label = "nsa310s:green:usb";
-+			gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
-+		};
-+		green-copy {
-+			label = "nsa310s:green:copy";
-+			gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
-+			linux,default-trigger = "ide-disk";
-+		};
-+		red-copy {
-+			label = "nsa310s:red:copy";
-+			gpios = <&gpio0 23 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	gpio_poweroff {
-+		compatible = "gpio-poweroff";
-+		pinctrl-0 = <&pmx_pwr_off>;
-+		pinctrl-names = "default";
-+		gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&nand {
-+	status = "okay";
-+	chip-delay = <35>;
-+
-+	partition@0 {
-+		label = "u-boot";
-+		reg = <0x0000000 0xe0000>;
-+	};
-+
-+	partition@e0000 {
-+		label = "u-boot environment";
-+		reg = <0xe0000 0x100000>;
-+	};
-+
-+	partition@100000 {
-+		label = "second stage u-boot";
-+		reg = <0x100000 0x200000>;
-+	};
-+
-+	partition@200000 {
-+		label = "root";
-+		reg = <0x200000 0x7e00000>;
-+	};
-+};
-+
-+&mdio {
-+	status = "okay";
-+	ethphy0: ethernet-phy@1 {
-+		compatible = "marvell,88e1318s";
-+		reg = <1>;
-+		marvell,reg-init = <0x1 0x16 0x0 0x3>,
-+							<0x1 0x10 0x0 0x1017>,
-+							<0x1 0x11 0x0 0x4408>,
-+							<0x1 0x16 0x0 0x0>,
-+							<0x1 0x4 0x0 0x1e1>,
-+							<0x1 0x9 0x0 0x300>,
-+							<0x1 0x10 0x0 0x3860>,
-+							<0x1 0x0 0x0 0x9140>;
-+	};
-+};
-+
-+&eth0 {
-+	status = "okay";
-+
-+	ethernet0-port@0 {
-+		phy-handle = <&ethphy0>;
-+	};
-+};
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -196,6 +196,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- 	kirkwood-ns2mini.dtb \
- 	kirkwood-nsa310.dtb \
- 	kirkwood-nsa310a.dtb \
-+	kirkwood-nsa310s.dtb \
- 	kirkwood-openblocks_a6.dtb \
- 	kirkwood-openblocks_a7.dtb \
- 	kirkwood-openrd-base.dtb \
diff --git a/target/linux/kirkwood/patches-4.3/200-disable-tso.patch b/target/linux/kirkwood/patches-4.3/200-disable-tso.patch
deleted file mode 100644
index c421c18efa..0000000000
--- a/target/linux/kirkwood/patches-4.3/200-disable-tso.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Subject: [PATCH] net: mv643xx_eth: Make TSO disabled by default
-
-Data corruption has been observed to be produced by TSO. For instance,
-accessing files on a NFS-server with TSO enabled results in different data
-transferred each time.
-
-This has been observed only on Kirkwood platforms, i.e. with the mv643xx_eth
-driver. Same tests on platforms using the mvneta ethernet driver have
-passed without errors.
-
-Make TSO disabled by default for now, until we can found a proper fix
-for the regression.
-
-Fixes: 3ae8f4e0b98 ('net: mv643xx_eth: Implement software TSO')
-Reported-by: Slawomir Gajzner <slawomir.gajzner@gmail.com>
-Reported-by: Julien D'Ascenzio <jdascenzio@yahoo.fr>
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
----
---- a/drivers/net/ethernet/marvell/mv643xx_eth.c
-+++ b/drivers/net/ethernet/marvell/mv643xx_eth.c
-@@ -3178,11 +3178,11 @@ static int mv643xx_eth_probe(struct plat
- 	dev->watchdog_timeo = 2 * HZ;
- 	dev->base_addr = 0;
- 
--	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
-+	dev->features = NETIF_F_SG | NETIF_F_IP_CSUM;
- 	dev->vlan_features = dev->features;
- 
- 	dev->features |= NETIF_F_RXCSUM;
--	dev->hw_features = dev->features;
-+	dev->hw_features = dev->features | NETIF_F_TSO;
- 
- 	dev->priv_flags |= IFF_UNICAST_FLT;
- 	dev->gso_max_segs = MV643XX_MAX_TSO_SEGS;