realtek: add switch driver support for the RTL93XX based switches

Adds support for the RTL9300 and RTL9310 series of switches
with 10GBit per port and up to 56 ports.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>

5 files changed, 1522 insertions, 245 deletions

diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c
index a0717e1d9a..e0832c42b8 100644
--- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c
+++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/dsa.c
@@ -10,29 +10,6 @@
 extern struct rtl83xx_soc_info soc_info;
 
 
-static void rtl83xx_print_matrix(void)
-{
-	unsigned volatile int *ptr8;
-	volatile u64 *ptr9;
-	int i;
-
-	if (soc_info.family == RTL8380_FAMILY_ID) {
-		ptr8 = RTL838X_SW_BASE + RTL838X_PORT_ISO_CTRL(0);
-		for (i = 0; i < 28; i += 8)
-			pr_debug("> %8x %8x %8x %8x %8x %8x %8x %8x\n",
-				ptr8[i + 0], ptr8[i + 1], ptr8[i + 2], ptr8[i + 3],
-				ptr8[i + 4], ptr8[i + 5], ptr8[i + 6], ptr8[i + 7]);
-		pr_debug("CPU_PORT> %8x\n", ptr8[28]);
-	} else {
-		ptr9 = RTL838X_SW_BASE + RTL839X_PORT_ISO_CTRL(0);
-		for (i = 0; i < 52; i += 4)
-			pr_debug("> %16llx %16llx %16llx %16llx\n",
-				ptr9[i + 0], ptr9[i + 1], ptr9[i + 2], ptr9[i + 3]);
-		pr_debug("CPU_PORT> %16llx\n", ptr9[52]);
-	}
-
-}
-
 static void rtl83xx_init_stats(struct rtl838x_switch_priv *priv)
 {
 	mutex_lock(&priv->reg_mutex);
@@ -66,10 +43,17 @@ static void rtl83xx_write_cam(int idx, u32 *r)
 
 static u64 rtl83xx_hash_key(struct rtl838x_switch_priv *priv, u64 mac, u32 vid)
 {
-	if (priv->family_id == RTL8380_FAMILY_ID)
+	switch (priv->family_id) {
+	case RTL8380_FAMILY_ID:
 		return rtl838x_hash(priv, mac << 12 | vid);
-	else
+	case RTL8390_FAMILY_ID:
 		return rtl839x_hash(priv, mac << 12 | vid);
+	case RTL9300_FAMILY_ID:
+		return rtl930x_hash(priv, ((u64)vid) << 48 | mac);
+	default:
+		pr_err("Hash not implemented\n");
+	}
+	return 0;
 }
 
 static void rtl83xx_write_hash(int idx, u32 *r)
@@ -101,10 +85,10 @@ static void rtl83xx_enable_phy_polling(struct rtl838x_switch_priv *priv)
 	pr_debug("%s: %16llx\n", __func__, v);
 	priv->r->set_port_reg_le(v, priv->r->smi_poll_ctrl);
 
-	/* PHY update complete */
+	/* PHY update complete, there is no global PHY polling enable bit on the 9300 */
 	if (priv->family_id == RTL8390_FAMILY_ID)
 		sw_w32_mask(0, BIT(7), RTL839X_SMI_GLB_CTRL);
-	else
+	else if(priv->family_id == RTL9300_FAMILY_ID)
 		sw_w32_mask(0, 0x8000, RTL838X_SMI_GLB_CTRL);
 }
 
@@ -197,7 +181,10 @@ static int rtl83xx_setup(struct dsa_switch *ds)
 	}
 	priv->r->set_port_reg_be(port_bitmap, priv->r->port_iso_ctrl(priv->cpu_port));
 
-	rtl83xx_print_matrix();
+	if (priv->family_id == RTL8380_FAMILY_ID)
+		rtl838x_print_matrix();
+	else
+		rtl839x_print_matrix();
 
 	rtl83xx_init_stats(priv);
 
@@ -210,6 +197,44 @@ static int rtl83xx_setup(struct dsa_switch *ds)
 	return 0;
 }
 
+static int rtl930x_setup(struct dsa_switch *ds)
+{
+	int i;
+	struct rtl838x_switch_priv *priv = ds->priv;
+	u32 port_bitmap = BIT(priv->cpu_port);
+
+	pr_info("%s called\n", __func__);
+
+	// Enable CSTI STP mode
+//	sw_w32(1, RTL930X_ST_CTRL);
+
+	/* Disable MAC polling the PHY so that we can start configuration */
+	sw_w32(0, RTL930X_SMI_POLL_CTRL);
+
+	// Disable all ports except CPU port
+	for (i = 0; i < ds->num_ports; i++)
+		priv->ports[i].enable = false;
+	priv->ports[priv->cpu_port].enable = true;
+
+	for (i = 0; i < priv->cpu_port; i++) {
+		if (priv->ports[i].phy) {
+			priv->r->traffic_set(i, BIT(priv->cpu_port) | BIT(i));
+			port_bitmap |= 1ULL << i;
+		}
+	}
+	priv->r->traffic_set(priv->cpu_port, port_bitmap);
+
+	rtl930x_print_matrix();
+
+	// TODO: Initialize statistics
+
+	ds->configure_vlan_while_not_filtering = true;
+
+	rtl83xx_enable_phy_polling(priv);
+
+	return 0;
+}
+
 static void rtl83xx_phylink_validate(struct dsa_switch *ds, int port,
 				     unsigned long *supported,
 				     struct phylink_link_state *state)
@@ -269,13 +294,24 @@ static int rtl83xx_phylink_mac_link_state(struct dsa_switch *ds, int port,
 {
 	struct rtl838x_switch_priv *priv = ds->priv;
 	u64 speed;
+	u64 link;
 
 	if (port < 0 || port > priv->cpu_port)
 		return -EINVAL;
 
+	/*
+	 * On the RTL9300 for at least the RTL8226B PHY, the MAC-side link
+	 * state needs to be read twice in order to read a correct result.
+	 * This would not be necessary for ports connected e.g. to RTL8218D
+	 * PHYs.
+	 */
 	state->link = 0;
-	if (priv->r->get_port_reg_le(priv->r->mac_link_sts) & BIT_ULL(port))
+	link = priv->r->get_port_reg_le(priv->r->mac_link_sts);
+	link = priv->r->get_port_reg_le(priv->r->mac_link_sts);
+	if (link & BIT_ULL(port))
 		state->link = 1;
+	pr_info("%s: link state: %llx\n", __func__, link & BIT_ULL(port));
+
 	state->duplex = 0;
 	if (priv->r->get_port_reg_le(priv->r->mac_link_dup_sts) & BIT_ULL(port))
 		state->duplex = 1;
@@ -317,6 +353,10 @@ static void rtl83xx_phylink_mac_config(struct dsa_switch *ds, int port,
 
 	pr_debug("%s port %d, mode %x\n", __func__, port, mode);
 
+	// BUG: Make this work on RTL93XX
+	if (priv->family_id >= RTL9300_FAMILY_ID)
+		return;
+
 	if (port == priv->cpu_port) {
 		/* Set Speed, duplex, flow control
 		 * FORCE_EN | LINK_EN | NWAY_EN | DUP_SEL
@@ -422,15 +462,15 @@ static void rtl83xx_get_ethtool_stats(struct dsa_switch *ds, int port,
 	struct rtl838x_switch_priv *priv = ds->priv;
 	const struct rtl83xx_mib_desc *mib;
 	int i;
-	u64 high;
+	u64 h;
 
 	for (i = 0; i < ARRAY_SIZE(rtl83xx_mib); i++) {
 		mib = &rtl83xx_mib[i];
 
-		data[i] = sw_r32(priv->r->stat_port_std_mib(port) + 252 - mib->offset);
+		data[i] = sw_r32(priv->r->stat_port_std_mib + (port << 8) + 252 - mib->offset);
 		if (mib->size == 2) {
-			high = sw_r32(priv->r->stat_port_std_mib(port) + 252 - mib->offset - 4);
-			data[i] |= high << 32;
+			h = sw_r32(priv->r->stat_port_std_mib + (port << 8) + 248 - mib->offset);
+			data[i] |= h << 32;
 		}
 	}
 }
@@ -447,21 +487,30 @@ static int rtl83xx_port_enable(struct dsa_switch *ds, int port,
 				struct phy_device *phydev)
 {
 	struct rtl838x_switch_priv *priv = ds->priv;
+	u64 v;
 
 	pr_debug("%s: %x %d", __func__, (u32) priv, port);
 	priv->ports[port].enable = true;
 
 	/* enable inner tagging on egress, do not keep any tags */
-	sw_w32(1, priv->r->vlan_port_tag_sts_ctrl(port));
+	if (priv->family_id == RTL9310_FAMILY_ID)
+		sw_w32(BIT(4), priv->r->vlan_port_tag_sts_ctrl + (port << 2));
+	else
+		sw_w32(1, priv->r->vlan_port_tag_sts_ctrl + (port << 2));
 
 	if (dsa_is_cpu_port(ds, port))
 		return 0;
 
 	/* add port to switch mask of CPU_PORT */
-	priv->r->mask_port_reg_be(0ULL, BIT_ULL(port), priv->r->port_iso_ctrl(priv->cpu_port));
+	priv->r->traffic_enable(priv->cpu_port, port);
 
 	/* add all other ports in the same bridge to switch mask of port */
-	priv->r->mask_port_reg_be(0ULL, priv->ports[port].pm, priv->r->port_iso_ctrl(port));
+	v = priv->r->traffic_get(port);
+	v |= priv->ports[port].pm;
+	priv->r->traffic_set(port, v);
+
+	sw_w32_mask(0, BIT(port), RTL930X_L2_PORT_SABLK_CTRL);
+	sw_w32_mask(0, BIT(port), RTL930X_L2_PORT_DABLK_CTRL);
 
 	return 0;
 }
@@ -469,17 +518,21 @@ static int rtl83xx_port_enable(struct dsa_switch *ds, int port,
 static void rtl83xx_port_disable(struct dsa_switch *ds, int port)
 {
 	struct rtl838x_switch_priv *priv = ds->priv;
+	u64 v;
 
 	pr_debug("%s %x: %d", __func__, (u32)priv, port);
 	/* you can only disable user ports */
 	if (!dsa_is_user_port(ds, port))
 		return;
 
+	// BUG: This does not work on RTL931X
 	/* remove port from switch mask of CPU_PORT */
-	priv->r->mask_port_reg_be(BIT_ULL(port), 0, priv->r->port_iso_ctrl(priv->cpu_port));
+	priv->r->traffic_disable(priv->cpu_port, port);
 
 	/* remove all other ports in the same bridge from switch mask of port */
-	priv->r->mask_port_reg_be(priv->ports[port].pm, 0LL, priv->r->port_iso_ctrl(port));
+	v = priv->r->traffic_get(port);
+	v &= ~priv->ports[port].pm;
+	priv->r->traffic_set(port, v);
 
 	priv->ports[port].enable = false;
 }
@@ -565,7 +618,7 @@ static int rtl83xx_port_bridge_join(struct dsa_switch *ds, int port,
 					struct net_device *bridge)
 {
 	struct rtl838x_switch_priv *priv = ds->priv;
-	u64 port_bitmap = BIT_ULL(priv->cpu_port);
+	u64 port_bitmap = 1ULL << priv->cpu_port, v;
 	int i;
 
 	pr_debug("%s %x: %d %llx", __func__, (u32)priv, port, port_bitmap);
@@ -579,20 +632,19 @@ static int rtl83xx_port_bridge_join(struct dsa_switch *ds, int port,
 			if (dsa_to_port(ds, i)->bridge_dev != bridge)
 				continue;
 			if (priv->ports[i].enable)
-				priv->r->mask_port_reg_be(0, BIT_ULL(port),
-						       priv->r->port_iso_ctrl(i));
-			priv->ports[i].pm |= BIT_ULL(port);
+				priv->r->traffic_enable(i, port);
 
-			port_bitmap |= BIT_ULL(i);
+			priv->ports[i].pm |= 1ULL << port;
+			port_bitmap |= 1ULL << i;
 		}
 	}
 
 	/* Add all other ports to this port matrix. */
 	if (priv->ports[port].enable) {
-		priv->r->mask_port_reg_be(0, BIT_ULL(port),
-					priv->r->port_iso_ctrl(priv->cpu_port));
-		priv->r->mask_port_reg_be(0, port_bitmap,
-					priv->r->port_iso_ctrl(port));
+		priv->r->traffic_enable(priv->cpu_port, port);
+		v = priv->r->traffic_get(port);
+		v |= port_bitmap;
+		priv->r->traffic_set(port, v);
 	}
 	priv->ports[port].pm |= port_bitmap;
 	mutex_unlock(&priv->reg_mutex);
@@ -604,7 +656,7 @@ static void rtl83xx_port_bridge_leave(struct dsa_switch *ds, int port,
 					struct net_device *bridge)
 {
 	struct rtl838x_switch_priv *priv = ds->priv;
-	u64 port_bitmap = BIT_ULL(priv->cpu_port);
+	u64 port_bitmap = 1ULL << priv->cpu_port, v;
 	int i;
 
 	pr_debug("%s %x: %d", __func__, (u32)priv, port);
@@ -620,62 +672,53 @@ static void rtl83xx_port_bridge_leave(struct dsa_switch *ds, int port,
 			if (dsa_to_port(ds, i)->bridge_dev != bridge)
 				continue;
 			if (priv->ports[i].enable)
-				priv->r->mask_port_reg_be(BIT_ULL(port), 0,
-						       priv->r->port_iso_ctrl(i));
-			priv->ports[i].pm &= ~BIT_ULL(port);
+				priv->r->traffic_disable(i, port);
 
+			priv->ports[i].pm |= 1ULL << port;
 			port_bitmap &= ~BIT_ULL(i);
 		}
 	}
 
 	/* Add all other ports to this port matrix. */
-	if (priv->ports[port].enable)
-		priv->r->mask_port_reg_be(0, port_bitmap, priv->r->port_iso_ctrl(port));
+	if (priv->ports[port].enable) {
+		v = priv->r->traffic_get(port);
+		v |= port_bitmap;
+		priv->r->traffic_set(port, v);
+	}
 	priv->ports[port].pm &= ~port_bitmap;
 
 	mutex_unlock(&priv->reg_mutex);
 }
 
-static void rtl83xx_port_stp_state_set(struct dsa_switch *ds, int port,
-				       u8 state)
+void rtl83xx_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
 {
-	u32 cmd, msti = 0;
+	u32 msti = 0;
 	u32 port_state[4];
-	int index, bit, i;
+	int index, bit;
 	int pos = port;
 	struct rtl838x_switch_priv *priv = ds->priv;
-	int n = priv->family_id == RTL8380_FAMILY_ID ? 2 : 4;
+	int n = priv->port_width << 1;
 
-	pr_debug("%s: port %d state %2x\n", __func__, port, state);
-
-	/* CPU PORT can only be configured on RTL838x */
-	if (port >= priv->cpu_port || port > 51)
+	/* Ports above or equal CPU port can never be configured */
+	if (port >= priv->cpu_port)
 		return;
 
 	mutex_lock(&priv->reg_mutex);
 
-	/* For the RTL839x, the bits are left-aligned in the 128 bit field */
+	/* For the RTL839x and following, the bits are left-aligned, 838x and 930x
+	 * have 64 bit fields, 839x and 931x have 128 bit fields
+	 */
 	if (priv->family_id == RTL8390_FAMILY_ID)
 		pos += 12;
+	if (priv->family_id == RTL9300_FAMILY_ID)
+		pos += 3;
+	if (priv->family_id == RTL9310_FAMILY_ID)
+		pos += 8;
 
 	index = n - (pos >> 4) - 1;
 	bit = (pos << 1) % 32;
 
-	if (priv->family_id == RTL8380_FAMILY_ID) {
-		cmd = BIT(15) /* Execute cmd */
-			| BIT(14) /* Read */
-			| 2 << 12 /* Table type 0b10 */
-			| (msti & 0xfff);
-	} else {
-		cmd = BIT(16) /* Execute cmd */
-			| 0 << 15 /* Read */
-			| 5 << 12 /* Table type 0b101 */
-			| (msti & 0xfff);
-	}
-	priv->r->exec_tbl0_cmd(cmd);
-
-	for (i = 0; i < n; i++)
-		port_state[i] = sw_r32(priv->r->tbl_access_data_0(i));
+	priv->r->stp_get(priv, msti, port_state);
 
 	pr_debug("Current state, port %d: %d\n", port, (port_state[index] >> bit) & 3);
 	port_state[index] &= ~(3 << bit);
@@ -697,25 +740,12 @@ static void rtl83xx_port_stp_state_set(struct dsa_switch *ds, int port,
 		break;
 	}
 
-	if (priv->family_id == RTL8380_FAMILY_ID) {
-		cmd = BIT(15) /* Execute cmd */
-			| 0 << 14 /* Write */
-			| 2 << 12 /* Table type 0b10 */
-			| (msti & 0xfff);
-	} else {
-		cmd = 1 << 16 /* Execute cmd */
-			| BIT(15) /* Write */
-			| 5 << 12 /* Table type 0b101 */
-			| (msti & 0xfff);
-	}
-	for (i = 0; i < n; i++)
-		sw_w32(port_state[i], priv->r->tbl_access_data_0(i));
-	priv->r->exec_tbl0_cmd(cmd);
+	priv->r->stp_set(priv, msti, port_state);
 
 	mutex_unlock(&priv->reg_mutex);
 }
 
-static void rtl83xx_fast_age(struct dsa_switch *ds, int port)
+void rtl83xx_fast_age(struct dsa_switch *ds, int port)
 {
 	struct rtl838x_switch_priv *priv = ds->priv;
 	int s = priv->family_id == RTL8390_FAMILY_ID ? 2 : 0;
@@ -735,7 +765,22 @@ static void rtl83xx_fast_age(struct dsa_switch *ds, int port)
 	 */
 	sw_w32(1 << (26 + s) | 1 << (23 + s) | port << (5 + (s / 2)), priv->r->l2_tbl_flush_ctrl);
 
-	do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & (1 << (26 + s)));
+	do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & BIT(26 + s));
+
+	mutex_unlock(&priv->reg_mutex);
+}
+
+void rtl930x_fast_age(struct dsa_switch *ds, int port)
+{
+	struct rtl838x_switch_priv *priv = ds->priv;
+
+	pr_debug("FAST AGE port %d\n", port);
+	mutex_lock(&priv->reg_mutex);
+	sw_w32(port << 11, RTL930X_L2_TBL_FLUSH_CTRL + 4);
+
+	sw_w32(BIT(26) | BIT(30), RTL930X_L2_TBL_FLUSH_CTRL);
+
+	do { } while (sw_r32(priv->r->l2_tbl_flush_ctrl) & BIT(30));
 
 	mutex_unlock(&priv->reg_mutex);
 }
@@ -749,17 +794,24 @@ static int rtl83xx_vlan_filtering(struct dsa_switch *ds, int port,
 	mutex_lock(&priv->reg_mutex);
 
 	if (vlan_filtering) {
-		/* Enable ingress and egress filtering */
+		/* Enable ingress and egress filtering
+		 * The VLAN_PORT_IGR_FILTER register uses 2 bits for each port to define
+		 * the filter action:
+		 * 0: Always Forward
+		 * 1: Drop packet
+		 * 2: Trap packet to CPU port
+		 * The Egress filter used 1 bit per state (0: DISABLED, 1: ENABLED)
+		 */
 		if (port != priv->cpu_port)
 			sw_w32_mask(0b10 << ((port % 16) << 1), 0b01 << ((port % 16) << 1),
-				    priv->r->vlan_port_igr_filter(port));
-		sw_w32_mask(0, 1 << (port % 32), priv->r->vlan_port_egr_filter(port));
+				    priv->r->vlan_port_igr_filter + ((port >> 5) << 2));
+		sw_w32_mask(0, BIT(port % 32), priv->r->vlan_port_egr_filter + ((port >> 4) << 2));
 	} else {
 		/* Disable ingress and egress filtering */
 		if (port != priv->cpu_port)
 			sw_w32_mask(0b11 << ((port % 16) << 1), 0,
-				    priv->r->vlan_port_igr_filter(port));
-		sw_w32_mask(1 << (port % 32), 0, priv->r->vlan_port_egr_filter(port));
+				    priv->r->vlan_port_igr_filter + ((port >> 5) << 2));
+		sw_w32_mask(BIT(port % 32), 0, priv->r->vlan_port_egr_filter + ((port >> 4) << 2));
 	}
 
 	/* Do we need to do something to the CPU-Port, too? */
@@ -774,21 +826,23 @@ static int rtl83xx_vlan_prepare(struct dsa_switch *ds, int port,
 	struct rtl838x_vlan_info info;
 	struct rtl838x_switch_priv *priv = ds->priv;
 
-	pr_debug("%s: port %d\n", __func__, port);
+	pr_info("%s: port %d\n", __func__, port);
 
 	mutex_lock(&priv->reg_mutex);
 
-	if (priv->family_id == RTL8380_FAMILY_ID)
-		rtl838x_vlan_profile_dump(0);
-	else
-		rtl839x_vlan_profile_dump(0);
-
-	priv->r->vlan_tables_read(0, &info);
+	priv->r->vlan_profile_dump(1);
+	priv->r->vlan_tables_read(1, &info);
 
-	pr_debug("Tagged ports %llx, untag %llx, prof %x, MC# %d, UC# %d, FID %x\n",
+	pr_info("Tagged ports %llx, untag %llx, prof %x, MC# %d, UC# %d, FID %x\n",
 		info.tagged_ports, info.untagged_ports, info.profile_id,
 		info.hash_mc_fid, info.hash_uc_fid, info.fid);
 
+	priv->r->vlan_set_untagged(1, info.untagged_ports);
+	pr_debug("SET: Untagged ports, VLAN %d: %llx\n", 1, info.untagged_ports);
+
+	priv->r->vlan_set_tagged(1, &info);
+	pr_debug("SET: Tagged ports, VLAN %d: %llx\n", 1, info.tagged_ports);
+
 	mutex_unlock(&priv->reg_mutex);
 	return 0;
 }
@@ -796,11 +850,11 @@ static int rtl83xx_vlan_prepare(struct dsa_switch *ds, int port,
 static void rtl83xx_vlan_add(struct dsa_switch *ds, int port,
 			    const struct switchdev_obj_port_vlan *vlan)
 {
-	struct rtl838x_vlan_info info = {};
+	struct rtl838x_vlan_info info;
 	struct rtl838x_switch_priv *priv = ds->priv;
 	int v;
 
-	pr_debug("%s port %d, vid_end %d, vid_end %d, flags %x\n", __func__,
+	pr_info("%s port %d, vid_end %d, vid_end %d, flags %x\n", __func__,
 		port, vlan->vid_begin, vlan->vid_end, vlan->flags);
 
 	if (vlan->vid_begin > 4095 || vlan->vid_end > 4095) {
@@ -812,12 +866,19 @@ static void rtl83xx_vlan_add(struct dsa_switch *ds, int port,
 	mutex_lock(&priv->reg_mutex);
 
 	if (vlan->flags & BRIDGE_VLAN_INFO_PVID) {
-		/* Set both inner and outer PVID of the port */
-		sw_w32((vlan->vid_end << 16) | vlan->vid_end << 2, priv->r->vlan_port_pb(port));
-		priv->ports[port].pvid = vlan->vid_end;
+		for (v = vlan->vid_begin; v <= vlan->vid_end; v++) {
+			if (!v)
+				continue;
+			/* Set both inner and outer PVID of the port */
+			sw_w32((v << 16) | v << 2, priv->r->vlan_port_pb + (port << 2));
+			priv->ports[port].pvid = vlan->vid_end;
+		}
 	}
 
 	for (v = vlan->vid_begin; v <= vlan->vid_end; v++) {
+		if (!v)
+			continue;
+
 		/* Get port memberships of this vlan */
 		priv->r->vlan_tables_read(v, &info);
 
@@ -838,10 +899,10 @@ static void rtl83xx_vlan_add(struct dsa_switch *ds, int port,
 			info.untagged_ports |= BIT_ULL(port);
 
 		priv->r->vlan_set_untagged(v, info.untagged_ports);
-		pr_debug("Untagged ports, VLAN %d: %llx\n", v, info.untagged_ports);
+		pr_info("Untagged ports, VLAN %d: %llx\n", v, info.untagged_ports);
 
 		priv->r->vlan_set_tagged(v, &info);
-		pr_debug("Tagged ports, VLAN %d: %llx\n", v, info.tagged_ports);
+		pr_info("Tagged ports, VLAN %d: %llx\n", v, info.tagged_ports);
 	}
 
 	mutex_unlock(&priv->reg_mutex);
@@ -870,7 +931,7 @@ static int rtl83xx_vlan_del(struct dsa_switch *ds, int port,
 	for (v = vlan->vid_begin; v <= vlan->vid_end; v++) {
 		/* Reset to default if removing the current PVID */
 		if (v == pvid)
-			sw_w32(0, priv->r->vlan_port_pb(port));
+			sw_w32(0, priv->r->vlan_port_pb + (port << 2));
 
 		/* Get port memberships of this vlan */
 		priv->r->vlan_tables_read(v, &info);
@@ -962,7 +1023,7 @@ static int rtl83xx_port_fdb_del(struct dsa_switch *ds, int port,
 	u64 entry;
 	int idx = -1, err = 0, i;
 
-	pr_debug("In %s, mac %llx, vid: %d, key: %x\n", __func__, mac, vid, key);
+	pr_debug("In %s, mac %llx, vid: %d, key: %x08x\n", __func__, mac, vid, key);
 	mutex_lock(&priv->reg_mutex);
 	for (i = 0; i < 4; i++) {
 		entry = priv->r->read_l2_entry_using_hash(key, i, &e);
@@ -1048,6 +1109,7 @@ static int rtl83xx_port_mirror_add(struct dsa_switch *ds, int port,
 	/* We support 4 mirror groups, one destination port per group */
 	int group;
 	struct rtl838x_switch_priv *priv = ds->priv;
+	int ctrl_reg, dpm_reg, spm_reg;	
 
 	pr_debug("In %s\n", __func__);
 
@@ -1065,30 +1127,34 @@ static int rtl83xx_port_mirror_add(struct dsa_switch *ds, int port,
 	if (group >= 4)
 		return -ENOSPC;
 
+	ctrl_reg = priv->r->mir_ctrl + group * 4;
+	dpm_reg = priv->r->mir_dpm + group * 4 * priv->port_width;
+	spm_reg = priv->r->mir_spm + group * 4 * priv->port_width;
+
 	pr_debug("Using group %d\n", group);
 	mutex_lock(&priv->reg_mutex);
 
 	if (priv->family_id == RTL8380_FAMILY_ID) {
 		/* Enable mirroring to port across VLANs (bit 11) */
-		sw_w32(1 << 11 | (mirror->to_local_port << 4) | 1, RTL838X_MIR_CTRL(group));
+		sw_w32(1 << 11 | (mirror->to_local_port << 4) | 1, ctrl_reg);
 	} else {
 		/* Enable mirroring to destination port */
-		sw_w32((mirror->to_local_port << 4) | 1, RTL839X_MIR_CTRL(group));
+		sw_w32((mirror->to_local_port << 4) | 1, ctrl_reg);
 	}
 
-	if (ingress && (priv->r->get_port_reg_be(priv->r->mir_spm(group)) & (1ULL << port))) {
+	if (ingress && (priv->r->get_port_reg_be(spm_reg) & (1ULL << port))) {
 		mutex_unlock(&priv->reg_mutex);
 		return -EEXIST;
 	}
-	if ((!ingress) && (priv->r->get_port_reg_be(priv->r->mir_dpm(group)) & (1ULL << port))) {
+	if ((!ingress) && (priv->r->get_port_reg_be(dpm_reg) & (1ULL << port))) {
 		mutex_unlock(&priv->reg_mutex);
 		return -EEXIST;
 	}
 
 	if (ingress)
-		priv->r->mask_port_reg_be(0, 1ULL << port, priv->r->mir_spm(group));
+		priv->r->mask_port_reg_be(0, 1ULL << port, spm_reg);
 	else
-		priv->r->mask_port_reg_be(0, 1ULL << port, priv->r->mir_dpm(group));
+		priv->r->mask_port_reg_be(0, 1ULL << port, dpm_reg);
 
 	priv->mirror_group_ports[group] = mirror->to_local_port;
 	mutex_unlock(&priv->reg_mutex);
@@ -1100,6 +1166,7 @@ static void rtl83xx_port_mirror_del(struct dsa_switch *ds, int port,
 {
 	int group = 0;
 	struct rtl838x_switch_priv *priv = ds->priv;
+	int ctrl_reg, dpm_reg, spm_reg;
 
 	pr_debug("In %s\n", __func__);
 	for (group = 0; group < 4; group++) {
@@ -1109,29 +1176,66 @@ static void rtl83xx_port_mirror_del(struct dsa_switch *ds, int port,
 	if (group >= 4)
 		return;
 
+	ctrl_reg = priv->r->mir_ctrl + group * 4;
+	dpm_reg = priv->r->mir_dpm + group * 4 * priv->port_width;
+	spm_reg = priv->r->mir_spm + group * 4 * priv->port_width;
+
 	mutex_lock(&priv->reg_mutex);
 	if (mirror->ingress) {
 		/* Ingress, clear source port matrix */
-		priv->r->mask_port_reg_be(1ULL << port, 0, priv->r->mir_spm(group));
+		priv->r->mask_port_reg_be(1ULL << port, 0, spm_reg);
 	} else {
 		/* Egress, clear destination port matrix */
-		priv->r->mask_port_reg_be(1ULL << port, 0, priv->r->mir_dpm(group));
+		priv->r->mask_port_reg_be(1ULL << port, 0, dpm_reg);
 	}
 
-	if (!(sw_r32(priv->r->mir_spm(group)) || sw_r32(priv->r->mir_dpm(group)))) {
+	if (!(sw_r32(spm_reg) || sw_r32(dpm_reg))) {
 		priv->mirror_group_ports[group] = -1;
-		sw_w32(0, priv->r->mir_ctrl(group));
+		sw_w32(0, ctrl_reg);
 	}
 
 	mutex_unlock(&priv->reg_mutex);
 }
 
+int dsa_phy_read(struct dsa_switch *ds, int phy_addr, int phy_reg)
+{
+	u32 val;
+	u32 offset = 0;
+	struct rtl838x_switch_priv *priv = ds->priv;
+
+	if (phy_addr >= 24 && phy_addr <= 27
+		&& priv->ports[24].phy == PHY_RTL838X_SDS) {
+		if (phy_addr == 26)
+			offset = 0x100;
+		val = sw_r32(RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2)) & 0xffff;
+		return val;
+	}
+
+	read_phy(phy_addr, 0, phy_reg, &val);
+	return val;
+}
+
+int dsa_phy_write(struct dsa_switch *ds, int phy_addr, int phy_reg, u16 val)
+{
+	u32 offset = 0;
+	struct rtl838x_switch_priv *priv = ds->priv;
+
+	if (phy_addr >= 24 && phy_addr <= 27
+	     && priv->ports[24].phy == PHY_RTL838X_SDS) {
+		if (phy_addr == 26)
+			offset = 0x100;
+		sw_w32(val, RTL838X_SDS4_FIB_REG0 + offset + (phy_reg << 2));
+		return 0;
+	}
+	return write_phy(phy_addr, 0, phy_reg, val);
+}
+
 const struct dsa_switch_ops rtl83xx_switch_ops = {
 	.get_tag_protocol	= rtl83xx_get_tag_protocol,
 	.setup			= rtl83xx_setup,
 
-	.phy_read		= rtl83xx_dsa_phy_read,
-	.phy_write		= rtl83xx_dsa_phy_write,
+	.phy_read		= dsa_phy_read,
+	.phy_write		= dsa_phy_write,
 
 	.phylink_validate	= rtl83xx_phylink_validate,
 	.phylink_mac_link_state	= rtl83xx_phylink_mac_link_state,
@@ -1168,3 +1272,38 @@ const struct dsa_switch_ops rtl83xx_switch_ops = {
 	.port_mirror_del	= rtl83xx_port_mirror_del,
 };
 
+const struct dsa_switch_ops rtl930x_switch_ops = {
+	.get_tag_protocol	= rtl83xx_get_tag_protocol,
+	.setup			= rtl930x_setup,
+
+	.phy_read		= dsa_phy_read,
+	.phy_write		= dsa_phy_write,
+
+	.phylink_validate	= rtl83xx_phylink_validate,
+	.phylink_mac_link_state	= rtl83xx_phylink_mac_link_state,
+	.phylink_mac_config	= rtl83xx_phylink_mac_config,
+	.phylink_mac_link_down	= rtl83xx_phylink_mac_link_down,
+	.phylink_mac_link_up	= rtl83xx_phylink_mac_link_up,
+
+	.get_strings		= rtl83xx_get_strings,
+	.get_ethtool_stats	= rtl83xx_get_ethtool_stats,
+	.get_sset_count		= rtl83xx_get_sset_count,
+
+	.port_enable		= rtl83xx_port_enable,
+	.port_disable		= rtl83xx_port_disable,
+
+	.set_ageing_time	= rtl83xx_set_l2aging,
+	.port_bridge_join	= rtl83xx_port_bridge_join,
+	.port_bridge_leave	= rtl83xx_port_bridge_leave,
+	.port_stp_state_set	= rtl83xx_port_stp_state_set,
+	.port_fast_age		= rtl930x_fast_age,
+
+	.port_vlan_filtering	= rtl83xx_vlan_filtering,
+	.port_vlan_prepare	= rtl83xx_vlan_prepare,
+	.port_vlan_add		= rtl83xx_vlan_add,
+	.port_vlan_del		= rtl83xx_vlan_del,
+
+	.port_fdb_add		= rtl83xx_port_fdb_add,
+	.port_fdb_del		= rtl83xx_port_fdb_del,
+	.port_fdb_dump		= rtl83xx_port_fdb_dump,
+};
diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c
index c7b5873e99..de9e83bb8d 100644
--- a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c
+++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl838x.c
@@ -5,25 +5,17 @@
 
 extern struct mutex smi_lock;
 
-
-static inline void rtl838x_mask_port_reg(u64 clear, u64 set, int reg)
-{
-	sw_w32_mask((u32)clear, (u32)set, reg);
-}
-
-static inline void rtl838x_set_port_reg(u64 set, int reg)
-{
-	sw_w32(set, reg);
-}
-
-static inline u64 rtl838x_get_port_reg(int reg)
+void rtl838x_print_matrix(void)
 {
-	return ((u64) sw_r32(reg));
-}
+	unsigned volatile int *ptr8;
+	int i;
 
-static inline int rtl838x_stat_port_std_mib(int p)
-{
-	return RTL838X_STAT_PORT_STD_MIB + (p << 8);
+	ptr8 = RTL838X_SW_BASE + RTL838X_PORT_ISO_CTRL(0);
+	for (i = 0; i < 28; i += 8)
+		pr_info("> %8x %8x %8x %8x %8x %8x %8x %8x\n",
+			ptr8[i + 0], ptr8[i + 1], ptr8[i + 2], ptr8[i + 3],
+			ptr8[i + 4], ptr8[i + 5], ptr8[i + 6], ptr8[i + 7]);
+	pr_info("CPU_PORT> %8x\n", ptr8[28]);
 }
 
 static inline int rtl838x_port_iso_ctrl(int p)
@@ -122,24 +114,14 @@ static inline int rtl838x_l2_port_new_sa_fwd(int p)
 	return RTL838X_L2_PORT_NEW_SA_FWD(p);
 }
 
-static inline int rtl838x_mir_ctrl(int group)
-{
-	return RTL838X_MIR_CTRL(group);
-}
-
-static inline int rtl838x_mir_dpm(int group)
-{
-	return RTL838X_MIR_DPM_CTRL(group);
-}
-
-static inline int rtl838x_mir_spm(int group)
+static inline int rtl838x_mac_link_spd_sts(int p)
 {
-	return RTL838X_MIR_SPM_CTRL(group);
+	return RTL838X_MAC_LINK_SPD_STS(p);
 }
 
-static inline int rtl838x_mac_link_spd_sts(int p)
+inline static int rtl838x_trk_mbr_ctr(int group)
 {
-	return RTL838X_MAC_LINK_SPD_STS(p);
+	return RTL838X_TRK_MBR_CTR + (group << 2);
 }
 
 static u64 rtl838x_read_l2_entry_using_hash(u32 hash, u32 position, struct rtl838x_l2_entry *e)
@@ -235,14 +217,50 @@ static inline int rtl838x_vlan_port_igr_filter(int port)
 	return RTL838X_VLAN_PORT_IGR_FLTR(port);
 }
 
-static inline int rtl838x_vlan_port_pb(int port)
+static void rtl838x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
 {
-	return RTL838X_VLAN_PORT_PB_VLAN(port);
+	int i;
+	u32 cmd = 1 << 15 /* Execute cmd */
+		| 1 << 14 /* Read */
+		| 2 << 12 /* Table type 0b10 */
+		| (msti & 0xfff);
+	priv->r->exec_tbl0_cmd(cmd);
+
+	for (i = 0; i < 2; i++)
+		port_state[i] = sw_r32(priv->r->tbl_access_data_0(i));
 }
 
-static inline int rtl838x_vlan_port_tag_sts_ctrl(int port)
+static void rtl838x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
 {
-	return RTL838X_VLAN_PORT_TAG_STS_CTRL(port);
+	int i;
+	u32 cmd = 1 << 15 /* Execute cmd */
+		| 0 << 14 /* Write */
+		| 2 << 12 /* Table type 0b10 */
+		| (msti & 0xfff);
+
+	for (i = 0; i < 2; i++)
+		sw_w32(port_state[i], priv->r->tbl_access_data_0(i));
+	priv->r->exec_tbl0_cmd(cmd);
+}
+
+u64 rtl838x_traffic_get(int source)
+{
+	return rtl838x_get_port_reg(rtl838x_port_iso_ctrl(source));
+}
+
+void rtl838x_traffic_set(int source, u64 dest_matrix)
+{
+	rtl838x_set_port_reg(dest_matrix, rtl838x_port_iso_ctrl(source));
+}
+
+void rtl838x_traffic_enable(int source, int dest)
+{
+	rtl838x_mask_port_reg(0, BIT(dest), rtl838x_port_iso_ctrl(source));
+}
+
+void rtl838x_traffic_disable(int source, int dest)
+{
+	rtl838x_mask_port_reg(BIT(dest), 0, rtl838x_port_iso_ctrl(source));
 }
 
 const struct rtl838x_reg rtl838x_reg = {
@@ -254,8 +272,12 @@ const struct rtl838x_reg rtl838x_reg = {
 	.get_port_reg_le = rtl838x_get_port_reg,
 	.stat_port_rst = RTL838X_STAT_PORT_RST,
 	.stat_rst = RTL838X_STAT_RST,
-	.stat_port_std_mib = rtl838x_stat_port_std_mib,
+	.stat_port_std_mib = RTL838X_STAT_PORT_STD_MIB,
 	.port_iso_ctrl = rtl838x_port_iso_ctrl,
+	.traffic_enable = rtl838x_traffic_enable,
+	.traffic_disable = rtl838x_traffic_disable,
+	.traffic_get = rtl838x_traffic_get,
+	.traffic_set = rtl838x_traffic_set,
 	.l2_ctrl_0 = RTL838X_L2_CTRL_0,
 	.l2_ctrl_1 = RTL838X_L2_CTRL_1,
 	.l2_port_aging_out = RTL838X_L2_PORT_AGING_OUT,
@@ -272,12 +294,15 @@ const struct rtl838x_reg rtl838x_reg = {
 	.vlan_set_tagged = rtl838x_vlan_set_tagged,
 	.vlan_set_untagged = rtl838x_vlan_set_untagged,
 	.mac_force_mode_ctrl = rtl838x_mac_force_mode_ctrl,
+	.vlan_profile_dump = rtl838x_vlan_profile_dump,
+	.stp_get = rtl838x_stp_get,
+	.stp_set = rtl838x_stp_set,
 	.mac_port_ctrl = rtl838x_mac_port_ctrl,
 	.l2_port_new_salrn = rtl838x_l2_port_new_salrn,
 	.l2_port_new_sa_fwd = rtl838x_l2_port_new_sa_fwd,
-	.mir_ctrl = rtl838x_mir_ctrl,
-	.mir_dpm = rtl838x_mir_dpm,
-	.mir_spm = rtl838x_mir_spm,
+	.mir_ctrl = RTL838X_MIR_CTRL,
+	.mir_dpm = RTL838X_MIR_DPM_CTRL,
+	.mir_spm = RTL838X_MIR_SPM_CTRL,
 	.mac_link_sts = RTL838X_MAC_LINK_STS,
 	.mac_link_dup_sts = RTL838X_MAC_LINK_DUP_STS,
 	.mac_link_spd_sts = rtl838x_mac_link_spd_sts,
@@ -285,11 +310,13 @@ const struct rtl838x_reg rtl838x_reg = {
 	.mac_tx_pause_sts = RTL838X_MAC_TX_PAUSE_STS,
 	.read_l2_entry_using_hash = rtl838x_read_l2_entry_using_hash,
 	.read_cam = rtl838x_read_cam,
-	.vlan_profile = rtl838x_vlan_profile,
-	.vlan_port_egr_filter = rtl838x_vlan_port_egr_filter,
-	.vlan_port_igr_filter = rtl838x_vlan_port_igr_filter,
-	.vlan_port_pb = rtl838x_vlan_port_pb,
-	.vlan_port_tag_sts_ctrl = rtl838x_vlan_port_tag_sts_ctrl,
+	.vlan_port_egr_filter = RTL838X_VLAN_PORT_EGR_FLTR,
+	.vlan_port_igr_filter = RTL838X_VLAN_PORT_IGR_FLTR(0),
+	.vlan_port_pb = RTL838X_VLAN_PORT_PB_VLAN,
+	.vlan_port_tag_sts_ctrl = RTL838X_VLAN_PORT_TAG_STS_CTRL,
+	.trk_mbr_ctr = rtl838x_trk_mbr_ctr,
+	.rma_bpdu_fld_pmask = RTL838X_RMA_BPDU_FLD_PMSK,
+	.spcl_trap_eapol_ctrl = RTL838X_SPCL_TRAP_EAPOL_CTRL,
 };
 
 irqreturn_t rtl838x_switch_irq(int irq, void *dev_id)
@@ -302,7 +329,7 @@ irqreturn_t rtl838x_switch_irq(int irq, void *dev_id)
 
 	/* Clear status */
 	sw_w32(ports, RTL838X_ISR_PORT_LINK_STS_CHG);
-	pr_debug("RTL8380 Link change: status: %x, ports %x\n", status, ports);
+	pr_info("RTL8380 Link change: status: %x, ports %x\n", status, ports);
 
 	for (i = 0; i < 28; i++) {
 		if (ports & BIT(i)) {
@@ -469,8 +496,37 @@ void rtl838x_vlan_profile_dump(int index)
 
 	profile = sw_r32(RTL838X_VLAN_PROFILE(index));
 
-	pr_debug("VLAN %d: L2 learning: %d, L2 Unknown MultiCast Field %x, \
+	pr_info("VLAN %d: L2 learning: %d, L2 Unknown MultiCast Field %x, \
 		IPv4 Unknown MultiCast Field %x, IPv6 Unknown MultiCast Field: %x",
 		index, profile & 1, (profile >> 1) & 0x1ff, (profile >> 10) & 0x1ff,
 		(profile >> 19) & 0x1ff);
 }
+
+void rtl8380_sds_rst(int mac)
+{
+	u32 offset = (mac == 24) ? 0 : 0x100;
+
+	sw_w32_mask(1 << 11, 0, RTL838X_SDS4_FIB_REG0 + offset);
+	sw_w32_mask(0x3, 0, RTL838X_SDS4_REG28 + offset);
+	sw_w32_mask(0x3, 0x3, RTL838X_SDS4_REG28 + offset);
+	sw_w32_mask(0, 0x1 << 6, RTL838X_SDS4_DUMMY0 + offset);
+	sw_w32_mask(0x1 << 6, 0, RTL838X_SDS4_DUMMY0 + offset);
+	pr_debug("SERDES reset: %d\n", mac);
+}
+
+int rtl8380_sds_power(int mac, int val)
+{
+	u32 mode = (val == 1) ? 0x4 : 0x9;
+	u32 offset = (mac == 24) ? 5 : 0;
+
+	if ((mac != 24) && (mac != 26)) {
+		pr_err("%s: not a fibre port: %d\n", __func__, mac);
+		return -1;
+	}
+
+	sw_w32_mask(0x1f << offset, mode << offset, RTL838X_SDS_MODE_SEL);
+
+	rtl8380_sds_rst(mac);
+
+	return 0;
+}
diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl930x.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl930x.c
new file mode 100644
index 0000000000..59c283903b
--- /dev/null
+++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl930x.c
@@ -0,0 +1,607 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <asm/mach-rtl838x/mach-rtl83xx.h>
+#include "rtl83xx.h"
+
+extern struct mutex smi_lock;
+extern struct rtl83xx_soc_info soc_info;
+
+void rtl930x_print_matrix(void)
+{
+	int i;
+	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6);
+
+	for (i = 0; i < 29; i++) {
+		rtl_table_read(r, i);
+		pr_debug("> %08x\n", sw_r32(rtl_table_data(r, 0)));
+	}
+	rtl_table_release(r);
+}
+
+inline void rtl930x_exec_tbl0_cmd(u32 cmd)
+{
+	sw_w32(cmd, RTL930X_TBL_ACCESS_CTRL_0);
+	do { } while (sw_r32(RTL930X_TBL_ACCESS_CTRL_0) & (1 << 17));
+}
+
+inline void rtl930x_exec_tbl1_cmd(u32 cmd)
+{
+	sw_w32(cmd, RTL930X_TBL_ACCESS_CTRL_1);
+	do { } while (sw_r32(RTL930X_TBL_ACCESS_CTRL_1) & (1 << 17));
+}
+
+inline int rtl930x_tbl_access_data_0(int i)
+{
+	return RTL930X_TBL_ACCESS_DATA_0(i);
+}
+
+static inline int rtl930x_l2_port_new_salrn(int p)
+{
+	return RTL930X_L2_PORT_SALRN(p);
+}
+
+static inline int rtl930x_l2_port_new_sa_fwd(int p)
+{
+	// TODO: The definition of the fields changed, because of the master-cpu in a stack
+	return RTL930X_L2_PORT_NEW_SA_FWD(p);
+}
+
+inline static int rtl930x_trk_mbr_ctr(int group)
+{
+	return RTL930X_TRK_MBR_CTRL + (group << 2);
+}
+
+static void rtl930x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info)
+{
+	u32 v, w;
+	// Read VLAN table (0) via register 0
+	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 1);
+
+	rtl_table_read(r, vlan);
+	v = sw_r32(rtl_table_data(r, 0));
+	w = sw_r32(rtl_table_data(r, 1));
+	pr_debug("VLAN_READ %d: %08x %08x\n", vlan, v, w);
+	rtl_table_release(r);
+
+	info->tagged_ports = v >> 3;
+	info->profile_id = (w >> 24) & 7;
+	info->hash_mc_fid = !!(w & BIT(27));
+	info->hash_uc_fid = !!(w & BIT(28));
+	info->fid = ((v & 0x7) << 3) | ((w >> 29) & 0x7);
+
+	// Read UNTAG table via table register 2
+	r = rtl_table_get(RTL9300_TBL_2, 0);
+	rtl_table_read(r, vlan);
+	v = sw_r32(rtl_table_data(r, 0));
+	rtl_table_release(r);
+
+	info->untagged_ports = v >> 3;
+}
+
+static void rtl930x_vlan_set_tagged(u32 vlan, struct rtl838x_vlan_info *info)
+{
+	u32 v, w;
+	// Access VLAN table (1) via register 0
+	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 1);
+
+	v = info->tagged_ports << 3;
+	v |= ((u32)info->fid) >> 3;
+
+	w = ((u32)info->fid) << 29;
+	w |= info->hash_mc_fid ? BIT(27) : 0;
+	w |= info->hash_uc_fid ? BIT(28) : 0;
+	w |= info->profile_id << 24;
+
+	sw_w32(v, rtl_table_data(r, 0));
+	sw_w32(w, rtl_table_data(r, 1));
+
+	rtl_table_write(r, vlan);
+	rtl_table_release(r);
+}
+
+void rtl930x_vlan_profile_dump(int index)
+{
+	u32 profile[5];
+
+	if (index < 0 || index > 7)
+		return;
+
+	profile[0] = sw_r32(RTL930X_VLAN_PROFILE_SET(index));
+	profile[1] = sw_r32(RTL930X_VLAN_PROFILE_SET(index) + 4);
+	profile[2] = sw_r32(RTL930X_VLAN_PROFILE_SET(index) + 8) & 0x1FFFFFFF;
+	profile[3] = sw_r32(RTL930X_VLAN_PROFILE_SET(index) + 12) & 0x1FFFFFFF;
+	profile[4] = sw_r32(RTL930X_VLAN_PROFILE_SET(index) + 16) & 0x1FFFFFFF;
+
+	pr_debug("VLAN %d: L2 learning: %d, L2 Unknown MultiCast Field %x, \
+		IPv4 Unknown MultiCast Field %x, IPv6 Unknown MultiCast Field: %x",
+		index, profile[0] & (3 << 21), profile[2], profile[3], profile[4]);
+}
+
+static void rtl930x_vlan_set_untagged(u32 vlan, u64 portmask)
+{
+	struct table_reg *r = rtl_table_get(RTL9300_TBL_2, 0);
+
+	sw_w32(portmask << 3, rtl_table_data(r, 0));
+	rtl_table_write(r, vlan);
+	rtl_table_release(r);
+}
+
+static void rtl930x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
+{
+	int i;
+	u32 cmd = 1 << 17 /* Execute cmd */
+		| 0 << 16 /* Read */
+		| 4 << 12 /* Table type 0b10 */
+		| (msti & 0xfff);
+	priv->r->exec_tbl0_cmd(cmd);
+
+	for (i = 0; i < 2; i++)
+		port_state[i] = sw_r32(RTL930X_TBL_ACCESS_DATA_0(i));
+	pr_debug("MSTI: %d STATE: %08x, %08x\n", msti, port_state[0], port_state[1]);
+}
+
+static void rtl930x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
+{
+	int i;
+	u32 cmd = 1 << 17 /* Execute cmd */
+		| 1 << 16 /* Write */
+		| 4 << 12 /* Table type 4 */
+		| (msti & 0xfff);
+
+	for (i = 0; i < 2; i++)
+		sw_w32(port_state[i], RTL930X_TBL_ACCESS_DATA_0(i));
+	priv->r->exec_tbl0_cmd(cmd);
+}
+
+static inline int rtl930x_mac_force_mode_ctrl(int p)
+{
+	return RTL930X_MAC_FORCE_MODE_CTRL + (p << 2);
+}
+
+static inline int rtl930x_mac_port_ctrl(int p)
+{
+	return RTL930X_MAC_L2_PORT_CTRL(p);
+}
+
+static inline int rtl930x_mac_link_spd_sts(int p)
+{
+	return RTL930X_MAC_LINK_SPD_STS(p);
+}
+
+static void rtl930x_fill_l2_entry(u32 r[], struct rtl838x_l2_entry *e)
+{
+	e->valid = !!(r[2] & BIT(31));
+	if (!e->valid)
+		return;
+
+	// TODO: Is there not a function to copy directly MAC memory?
+	e->mac[0] = (r[0] >> 24);
+	e->mac[1] = (r[0] >> 16);
+	e->mac[2] = (r[0] >> 8);
+	e->mac[3] = r[0];
+	e->mac[4] = (r[1] >> 24);
+	e->mac[5] = (r[1] >> 16);
+
+	/* Is it a unicast entry? check multicast bit */
+	if (!(e->mac[0] & 1)) {
+		e->type = L2_UNICAST;
+		e->is_static = !!(r[2] & BIT(14));
+		e->vid = r[2] & 0xfff;
+		e->rvid = r[1] & 0xfff;
+		e->port = (r[2] >> 20) & 0x3ff;
+		// Check for trunk port
+		if (r[2] & BIT(30)) {
+			e->stackDev = (e->port >> 9) & 1;
+			e->trunk = e->port & 0x3f;
+		} else {
+			e->stackDev = (e->port >> 6) & 0xf;
+			e->port = e->port & 0x3f;
+		}
+
+		e->block_da = !!(r[2] & BIT(15));
+		e->block_sa = !!(r[2] & BIT(16));
+		e->suspended = !!(r[2] & BIT(13));
+		e->next_hop = !!(r[2] & BIT(12));
+		e->age = (r[2] >> 17) & 3;
+		e->valid = true;
+
+	} else {
+		e->valid = true;
+		e->type = L2_MULTICAST;
+		e->mc_portmask_index = (r[2]>>6) & 0xfff;
+	}
+}
+
+static u64 rtl930x_read_l2_entry_using_hash(u32 hash, u32 position, struct rtl838x_l2_entry *e)
+{
+	u64 entry;
+	u32 r[3];
+	struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 0);
+	u32 idx = (0 << 14) | (hash << 2) | position;
+	int i;
+
+	rtl_table_read(q, idx);
+	for (i= 0; i < 3; i++)
+		r[i] = sw_r32(rtl_table_data(q, i));
+
+	rtl_table_release(q);
+
+	rtl930x_fill_l2_entry(r, e);
+	if (!e->valid)
+		return 0;
+
+	entry = ((u64)r[0] << 32) | (r[1] & 0xffff0000) | e->vid;
+	return entry;
+}
+
+static u64 rtl930x_read_cam(int idx, struct rtl838x_l2_entry *e)
+{
+	u64 entry;
+	u32 r[3];
+	struct table_reg *q = rtl_table_get(RTL9300_TBL_L2, 1);
+	int i;
+
+	rtl_table_read(q, idx);
+	for (i= 0; i < 3; i++)
+		r[i] = sw_r32(rtl_table_data(q, i));
+
+	rtl_table_release(q);
+
+	rtl930x_fill_l2_entry(r, e);
+	if (!e->valid)
+		return 0;
+
+	entry = ((u64)r[0] << 32) | (r[1] & 0xffff0000) | e->vid;
+
+	return entry;
+}
+
+u64 rtl930x_traffic_get(int source)
+{
+	u32 v;
+	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6);
+
+	rtl_table_read(r, source);
+	v = sw_r32(rtl_table_data(r, 0));
+	rtl_table_release(r);
+	return v >> 3;
+}
+
+/*
+ * Enable traffic between a source port and a destination port matrix
+ */
+void rtl930x_traffic_set(int source, u64 dest_matrix)
+{
+	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6);
+
+	sw_w32((dest_matrix << 3), rtl_table_data(r, 0));
+	rtl_table_write(r, source);
+	rtl_table_release(r);
+}
+
+void rtl930x_traffic_enable(int source, int dest)
+{
+	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6);
+	rtl_table_read(r, source);
+	sw_w32_mask(0, BIT(dest + 3), rtl_table_data(r, 0));
+	rtl_table_write(r, source);
+	rtl_table_release(r);
+}
+
+void rtl930x_traffic_disable(int source, int dest)
+{
+	struct table_reg *r = rtl_table_get(RTL9300_TBL_0, 6);
+	rtl_table_read(r, source);
+	sw_w32_mask(BIT(dest + 3), 0, rtl_table_data(r, 0));
+	rtl_table_write(r, source);
+	rtl_table_release(r);
+}
+
+void rtl9300_dump_debug(void)
+{
+	int i;
+	u16 r = RTL930X_STAT_PRVTE_DROP_COUNTER0;
+
+	for (i = 0; i < 10; i ++) {
+		pr_info("# %d %08x %08x %08x %08x %08x %08x %08x %08x\n", i * 8,
+			sw_r32(r), sw_r32(r + 4), sw_r32(r + 8), sw_r32(r + 12),
+			sw_r32(r + 16), sw_r32(r + 20), sw_r32(r + 24), sw_r32(r + 28));
+		r += 32;
+	}
+	pr_info("# %08x %08x %08x %08x %08x\n",
+		sw_r32(r), sw_r32(r + 4), sw_r32(r + 8), sw_r32(r + 12), sw_r32(r + 16));
+	rtl930x_print_matrix();
+	pr_info("RTL930X_L2_PORT_SABLK_CTRL: %08x, RTL930X_L2_PORT_DABLK_CTRL %08x\n",
+		sw_r32(RTL930X_L2_PORT_SABLK_CTRL), sw_r32(RTL930X_L2_PORT_DABLK_CTRL)
+
+	);
+}
+
+irqreturn_t rtl930x_switch_irq(int irq, void *dev_id)
+{
+	struct dsa_switch *ds = dev_id;
+	u32 status = sw_r32(RTL930X_ISR_GLB);
+	u32 ports = sw_r32(RTL930X_ISR_PORT_LINK_STS_CHG);
+	u32 link;
+	int i;
+
+	/* Clear status */
+	sw_w32(ports, RTL930X_ISR_PORT_LINK_STS_CHG);
+	pr_info("RTL9300 Link change: status: %x, ports %x\n", status, ports);
+
+	rtl9300_dump_debug();
+
+	for (i = 0; i < 28; i++) {
+		if (ports & BIT(i)) {
+			/* Read the register twice because of issues with latency at least
+			 * with the external RTL8226 PHY on the XGS1210 */
+			link = sw_r32(RTL930X_MAC_LINK_STS);
+			link = sw_r32(RTL930X_MAC_LINK_STS);
+			if (link & BIT(i))
+				dsa_port_phylink_mac_change(ds, i, true);
+			else
+				dsa_port_phylink_mac_change(ds, i, false);
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+int rtl9300_sds_power(int mac, int val)
+{
+	int sds_num;
+	u32 mode;
+
+	// TODO: these numbers are hard-coded for the Zyxel XGS1210 12 Switch
+	pr_info("SerDes: %s %d\n", __func__, mac);
+	switch (mac) {
+	case 24:
+		sds_num = 6;
+		mode = 0x12; // HISGMII
+		break;
+	case 25:
+		sds_num = 7;
+		mode = 0x12; // HISGMII
+		break;
+	case 26:
+		sds_num = 8;
+		mode = 0x1b; // 10GR/1000BX auto
+		break;
+	case 27:
+		sds_num = 9;
+		mode = 0x1b; // 10GR/1000BX auto
+		break;
+	default:
+		return -1;
+	}
+	if (!val)
+		mode = 0x1f; // OFF
+
+	rtl9300_sds_rst(sds_num, mode);
+
+	return 0;
+}
+
+
+int rtl930x_write_phy(u32 port, u32 page, u32 reg, u32 val)
+{
+	u32 v;
+	int err = 0;
+
+	pr_debug("%s: port %d, page: %d, reg: %x, val: %x\n", __func__, port, page, reg, val);
+
+	if (port > 63 || page > 4095 || reg > 31)
+		return -ENOTSUPP;
+
+	val &= 0xffff;
+	mutex_lock(&smi_lock);
+
+	sw_w32(BIT(port), RTL930X_SMI_ACCESS_PHY_CTRL_0);
+	sw_w32_mask(0xffff << 16, val << 16, RTL930X_SMI_ACCESS_PHY_CTRL_2);
+	v = reg << 20 | page << 3 | 0x1f << 15 | BIT(2) | BIT(0);
+	sw_w32(v, RTL930X_SMI_ACCESS_PHY_CTRL_1);
+
+	do {
+		v = sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_1);
+	} while (v & 0x1);
+
+	if (v & 0x2)
+		err = -EIO;
+
+	mutex_unlock(&smi_lock);
+
+	return err;
+}
+
+int rtl930x_read_phy(u32 port, u32 page, u32 reg, u32 *val)
+{
+	u32 v;
+	int err = 0;
+
+//	pr_info("In %s\n", __func__);
+	if (port > 63 || page > 4095 || reg > 31)
+		return -ENOTSUPP;
+
+	mutex_lock(&smi_lock);
+
+	sw_w32_mask(0xffff << 16, port << 16, RTL930X_SMI_ACCESS_PHY_CTRL_2);
+	v = reg << 20 | page << 3 | 0x1f << 15 | 1;
+	sw_w32(v, RTL930X_SMI_ACCESS_PHY_CTRL_1);
+
+	do {
+		v = sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_1);
+	} while ( v & 0x1);
+
+	if (v & BIT(25)) {
+		pr_debug("Error reading phy %d, register %d\n", port, reg);
+		err = -EIO;
+	}
+	*val = (sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_2) & 0xffff);
+
+	pr_debug("%s: port %d, page: %d, reg: %x, val: %x\n", __func__, port, page, reg, *val);
+
+	mutex_unlock(&smi_lock);
+
+	return err;
+}
+
+
+/*
+ * Write to an mmd register of the PHY
+ */
+int rtl930x_write_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 val)
+{
+	int err = 0;
+	u32 v;
+
+	mutex_lock(&smi_lock);
+
+	// Set PHY to access
+	sw_w32(BIT(port), RTL930X_SMI_ACCESS_PHY_CTRL_0);
+
+	// Set data to write
+	sw_w32_mask(0xffff << 16, val << 16, RTL930X_SMI_ACCESS_PHY_CTRL_2);
+
+	// Set MMD device number and register to write to
+	sw_w32(devnum << 16 | (regnum & 0xffff), RTL930X_SMI_ACCESS_PHY_CTRL_3);
+
+	v = BIT(2)| BIT(1)| BIT(0); // WRITE | MMD-access | EXEC
+	sw_w32(v, RTL930X_SMI_ACCESS_PHY_CTRL_1);
+
+	do {
+		v = sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_1);
+	} while ( v & BIT(0));
+
+	pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, val, err);
+	mutex_unlock(&smi_lock);
+	return err;
+}
+
+/*
+ * Read an mmd register of the PHY
+ */
+int rtl930x_read_mmd_phy(u32 port, u32 devnum, u32 regnum, u32 *val)
+{
+	int err = 0;
+	u32 v;
+
+	mutex_lock(&smi_lock);
+
+	// Set PHY to access
+	sw_w32_mask(0xffff << 16, port << 16, RTL930X_SMI_ACCESS_PHY_CTRL_2);
+
+	// Set MMD device number and register to write to
+	sw_w32(devnum << 16 | (regnum & 0xffff), RTL930X_SMI_ACCESS_PHY_CTRL_3);
+
+	v = BIT(1)| BIT(0); // MMD-access | EXEC
+	sw_w32(v, RTL930X_SMI_ACCESS_PHY_CTRL_1);
+
+	do {
+		v = sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_1);
+	} while ( v & 0x1);
+	// There is no error-checking via BIT 25 of v, as it does not seem to be set correctly
+	*val = (sw_r32(RTL930X_SMI_ACCESS_PHY_CTRL_2) & 0xffff);
+	pr_debug("%s: port %d, regnum: %x, val: %x (err %d)\n", __func__, port, regnum, *val, err);
+
+	mutex_unlock(&smi_lock);
+
+	return err;
+}
+
+
+/*
+ * Calculate both the block 0 and the block 1 hash, and return in
+ * lower and higher word of the return value since only 12 bit of
+ * the hash are significant
+ */
+u32 rtl930x_hash(struct rtl838x_switch_priv *priv, u64 seed)
+{
+	u32 k0, k1, h1, h2, h;
+
+	k0 = (u32) (((seed >> 55) & 0x1f) ^ ((seed >> 44) & 0x7ff)
+		^ ((seed >> 33) & 0x7ff) ^ ((seed >> 22) & 0x7ff)
+		^ ((seed >> 11) & 0x7ff) ^ (seed & 0x7ff));
+
+	h1 = (seed >> 11) & 0x7ff;
+	h1 = ((h1 & 0x1f) << 6) | ((h1 >> 5) & 0x3f);
+
+	h2 = (seed >> 33) & 0x7ff;
+	h2 = ((h2 & 0x3f) << 5)| ((h2 >> 6) & 0x3f);
+
+	k1 = (u32) (((seed << 55) & 0x1f) ^ ((seed >> 44) & 0x7ff) ^ h2
+		    ^ ((seed >> 22) & 0x7ff) ^ h1
+		    ^ (seed & 0x7ff));
+
+	// Algorithm choice for block 0
+	if (sw_r32(RTL930X_L2_CTRL) & BIT(0))
+		h = k1;
+	else
+		h = k0;
+
+	/* Algorithm choice for block 1
+	 * Since k0 and k1 are < 2048, adding 2048 will offset the hash into the second
+	 * half of hash-space
+	 * 2048 is in fact the hash-table size 16384 divided by 4 hashes per bucket
+	 * divided by 2 to divide the hash space in 2
+	 */
+	if (sw_r32(RTL930X_L2_CTRL) & BIT(1))
+		h |= (k1 + 2048) << 16;
+	else
+		h |= (k0 + 2048) << 16;
+
+	return h;
+}
+
+const struct rtl838x_reg rtl930x_reg = {
+	.mask_port_reg_be = rtl838x_mask_port_reg,
+	.set_port_reg_be = rtl838x_set_port_reg,
+	.get_port_reg_be = rtl838x_get_port_reg,
+	.mask_port_reg_le = rtl838x_mask_port_reg,
+	.set_port_reg_le = rtl838x_set_port_reg,
+	.get_port_reg_le = rtl838x_get_port_reg,
+	.stat_port_rst = RTL930X_STAT_PORT_RST,
+	.stat_rst = RTL930X_STAT_RST,
+	.stat_port_std_mib = RTL930X_STAT_PORT_MIB_CNTR,
+	.traffic_enable = rtl930x_traffic_enable,
+	.traffic_disable = rtl930x_traffic_disable,
+	.traffic_get = rtl930x_traffic_get,
+	.traffic_set = rtl930x_traffic_set,
+	.l2_ctrl_0 = RTL930X_L2_CTRL,
+	.l2_ctrl_1 = RTL930X_L2_AGE_CTRL,
+	.l2_port_aging_out = RTL930X_L2_PORT_AGE_CTRL,
+	.smi_poll_ctrl = RTL930X_SMI_POLL_CTRL, // TODO: Difference to RTL9300_SMI_PRVTE_POLLING_CTRL
+	.l2_tbl_flush_ctrl = RTL930X_L2_TBL_FLUSH_CTRL,
+	.exec_tbl0_cmd = rtl930x_exec_tbl0_cmd,
+	.exec_tbl1_cmd = rtl930x_exec_tbl1_cmd,
+	.tbl_access_data_0 = rtl930x_tbl_access_data_0,
+	.isr_glb_src = RTL930X_ISR_GLB,
+	.isr_port_link_sts_chg = RTL930X_ISR_PORT_LINK_STS_CHG,
+	.imr_port_link_sts_chg = RTL930X_IMR_PORT_LINK_STS_CHG,
+	.imr_glb = RTL930X_IMR_GLB,
+	.vlan_tables_read = rtl930x_vlan_tables_read,
+	.vlan_set_tagged = rtl930x_vlan_set_tagged,
+	.vlan_set_untagged = rtl930x_vlan_set_untagged,
+	.vlan_profile_dump = rtl930x_vlan_profile_dump,
+	.stp_get = rtl930x_stp_get,
+	.stp_set = rtl930x_stp_set,
+	.mac_force_mode_ctrl = rtl930x_mac_force_mode_ctrl,
+	.mac_port_ctrl = rtl930x_mac_port_ctrl,
+	.l2_port_new_salrn = rtl930x_l2_port_new_salrn,
+	.l2_port_new_sa_fwd = rtl930x_l2_port_new_sa_fwd,
+	.mir_ctrl = RTL930X_MIR_CTRL,
+	.mir_dpm = RTL930X_MIR_DPM_CTRL,
+	.mir_spm = RTL930X_MIR_SPM_CTRL,
+	.mac_link_sts = RTL930X_MAC_LINK_STS,
+	.mac_link_dup_sts = RTL930X_MAC_LINK_DUP_STS,
+	.mac_link_spd_sts = rtl930x_mac_link_spd_sts,
+	.mac_rx_pause_sts = RTL930X_MAC_RX_PAUSE_STS,
+	.mac_tx_pause_sts = RTL930X_MAC_TX_PAUSE_STS,
+	.read_l2_entry_using_hash = rtl930x_read_l2_entry_using_hash,
+	.read_cam = rtl930x_read_cam,
+	.vlan_port_egr_filter = RTL930X_VLAN_PORT_EGR_FLTR,
+	.vlan_port_igr_filter = RTL930X_VLAN_PORT_IGR_FLTR(0),
+	.vlan_port_pb = RTL930X_VLAN_PORT_PB_VLAN,
+	.vlan_port_tag_sts_ctrl = RTL930X_VLAN_PORT_TAG_STS_CTRL,
+	.trk_mbr_ctr = rtl930x_trk_mbr_ctr,
+	.rma_bpdu_fld_pmask = RTL930X_RMA_BPDU_FLD_PMSK,
+};
diff --git a/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl931x.c b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl931x.c
new file mode 100644
index 0000000000..a33941a0eb
--- /dev/null
+++ b/target/linux/realtek/files-5.4/drivers/net/dsa/rtl83xx/rtl931x.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <asm/mach-rtl838x/mach-rtl83xx.h>
+#include "rtl83xx.h"
+
+extern struct mutex smi_lock;
+extern struct rtl83xx_soc_info soc_info;
+
+inline void rtl931x_exec_tbl0_cmd(u32 cmd)
+{
+	sw_w32(cmd, RTL931X_TBL_ACCESS_CTRL_0);
+	do { } while (sw_r32(RTL931X_TBL_ACCESS_CTRL_0) & (1 << 20));
+}
+
+inline void rtl931x_exec_tbl1_cmd(u32 cmd)
+{
+	sw_w32(cmd, RTL931X_TBL_ACCESS_CTRL_1);
+	do { } while (sw_r32(RTL931X_TBL_ACCESS_CTRL_1) & (1 << 17));
+}
+
+inline int rtl931x_tbl_access_data_0(int i)
+{
+	return RTL931X_TBL_ACCESS_DATA_0(i);
+}
+
+void rtl931x_vlan_profile_dump(int index)
+{
+	u64 profile[4];
+
+	if (index < 0 || index > 15)
+		return;
+
+	profile[0] = sw_r32(RTL931X_VLAN_PROFILE_SET(index));
+	profile[1] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 4) & 0x1FFFFFFFULL) << 32
+		| (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 8) & 0xFFFFFFFF);
+	profile[2] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 16) & 0xFFFFFFFFULL) << 32
+		| (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 12) & 0x1FFFFFFULL);
+	profile[3] = (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 20) & 0x1FFFFFFFULL) << 32
+		| (sw_r32(RTL931X_VLAN_PROFILE_SET(index) + 24) & 0xFFFFFFFF);
+
+	pr_info("VLAN %d: L2 learning: %d, L2 Unknown MultiCast Field %llx, \
+		IPv4 Unknown MultiCast Field %llx, IPv6 Unknown MultiCast Field: %llx",
+		index, (u32) (profile[0] & (3 << 14)), profile[1], profile[2], profile[3]);
+}
+
+static void rtl931x_stp_get(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
+{
+	int i;
+	u32 cmd = 1 << 20 /* Execute cmd */
+		| 0 << 19 /* Read */
+		| 2 << 15 /* Table type 0b10 */
+		| (msti & 0x3fff);
+	priv->r->exec_tbl0_cmd(cmd);
+
+	for (i = 0; i < 4; i++)
+		port_state[i] = sw_r32(priv->r->tbl_access_data_0(i));
+}
+
+static void rtl931x_stp_set(struct rtl838x_switch_priv *priv, u16 msti, u32 port_state[])
+{
+	int i;
+	u32 cmd = 1 << 20 /* Execute cmd */
+		| 1 << 19 /* Write */
+		| 5 << 15 /* Table type 0b101 */
+		| (msti & 0x3fff);
+	for (i = 0; i < 4; i++)
+		sw_w32(port_state[i], priv->r->tbl_access_data_0(i));
+	priv->r->exec_tbl0_cmd(cmd);
+}
+
+inline static int rtl931x_trk_mbr_ctr(int group)
+{
+	return RTL931X_TRK_MBR_CTRL + (group << 2);
+}
+
+static void rtl931x_vlan_tables_read(u32 vlan, struct rtl838x_vlan_info *info)
+{
+	u32 v, w, x, y;
+	// Read VLAN table (3) via register 0
+	struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 3);
+
+	rtl_table_read(r, vlan);
+	v = sw_r32(rtl_table_data(r, 0));
+	w = sw_r32(rtl_table_data(r, 1));
+	x = sw_r32(rtl_table_data(r, 2));
+	y = sw_r32(rtl_table_data(r, 3));
+	pr_debug("VLAN_READ %d: %08x %08x\n", vlan, v, w);
+	rtl_table_release(r);
+
+	info->tagged_ports = ((u64) v) << 25 | (w >> 7);
+	info->profile_id = (x >> 16) & 0xf;
+	info->hash_mc_fid = !!(x & BIT(30));
+	info->hash_uc_fid = !!(x & BIT(31));
+	info->fid = w & 0x7f;
+	// TODO: use also info in 4th register
+
+	// Read UNTAG table via table register 3
+	r = rtl_table_get(RTL9310_TBL_3, 0);
+	rtl_table_read(r, vlan);
+	v = ((u64)sw_r32(rtl_table_data(r, 0))) << 25;
+	v |= sw_r32(rtl_table_data(r, 1)) >> 7;
+	rtl_table_release(r);
+
+	info->untagged_ports = v;
+}
+
+static void rtl931x_vlan_set_tagged(u32 vlan, struct rtl838x_vlan_info *info)
+{
+	u32 v, w, x;
+	// Access VLAN table (1) via register 0
+	struct table_reg *r = rtl_table_get(RTL9310_TBL_0, 3);
+
+	v = info->tagged_ports << 7;
+	w = (info->tagged_ports & 0x7f000000) << 25;
+	w |= (u32)info->fid;
+	x = info->profile_id << 16;
+	w |= info->hash_mc_fid ? BIT(30) : 0;
+	w |= info->hash_uc_fid ? BIT(31) : 0;
+	// TODO: use also info in 4th register
+
+	sw_w32(v, rtl_table_data(r, 0));
+	sw_w32(w, rtl_table_data(r, 1));
+	sw_w32(x, rtl_table_data(r, 2));
+
+	rtl_table_write(r, vlan);
+	rtl_table_release(r);
+}
+
+static void rtl931x_vlan_set_untagged(u32 vlan, u64 portmask)
+{
+	struct table_reg *r = rtl_table_get(RTL9310_TBL_3, 0);
+
+	rtl839x_set_port_reg_be(portmask << 7, rtl_table_data(r, 0));
+	rtl_table_write(r, vlan);
+	rtl_table_release(r);
+}
+
+static inline int rtl931x_mac_force_mode_ctrl(int p)
+{
+	return RTL931X_MAC_FORCE_MODE_CTRL + (p << 2);
+}
+
+static inline int rtl931x_mac_link_spd_sts(int p)
+{
+	return RTL931X_MAC_LINK_SPD_STS(p);
+}
+
+static inline int rtl931x_mac_port_ctrl(int p)
+{
+	return RTL931X_MAC_PORT_CTRL(p);
+}
+
+static inline int rtl931x_l2_port_new_salrn(int p)
+{
+	return RTL931X_L2_PORT_NEW_SALRN(p);
+}
+
+static inline int rtl931x_l2_port_new_sa_fwd(int p)
+{
+	return RTL931X_L2_PORT_NEW_SA_FWD(p);
+}
+
+static u64 rtl931x_read_l2_entry_using_hash(u32 hash, u32 position, struct rtl838x_l2_entry *e)
+{
+	u64 entry = 0;
+
+	// TODO: Implement
+	return entry;
+}
+
+static u64 rtl931x_read_cam(int idx, struct rtl838x_l2_entry *e)
+{
+	u64 entry = 0;
+
+	// TODO: Implement
+	return entry;
+}
+irqreturn_t rtl931x_switch_irq(int irq, void *dev_id)
+{
+	struct dsa_switch *ds = dev_id;
+	u32 status = sw_r32(RTL931X_ISR_GLB_SRC);
+	u64 ports = rtl839x_get_port_reg_le(RTL931X_ISR_PORT_LINK_STS_CHG);
+	u64 link;
+	int i;
+
+	/* Clear status */
+	rtl839x_set_port_reg_le(ports, RTL931X_ISR_PORT_LINK_STS_CHG);
+	pr_info("RTL9310 Link change: status: %x, ports %llx\n", status, ports);
+
+	for (i = 0; i < 56; i++) {
+		if (ports & BIT_ULL(i)) {
+			link = rtl839x_get_port_reg_le(RTL931X_MAC_LINK_STS);
+			if (link & BIT_ULL(i))
+				dsa_port_phylink_mac_change(ds, i, true);
+			else
+				dsa_port_phylink_mac_change(ds, i, false);
+		}
+	}
+	return IRQ_HANDLED;
+}
+
+
+int rtl931x_write_phy(u32 port, u32 page, u32 reg, u32 val)
+{
+	u32 v;
+	int err = 0;
+
+	val &= 0xffff;
+	if (port > 63 || page > 4095 || reg > 31)
+		return -ENOTSUPP;
+
+	mutex_lock(&smi_lock);
+	/* Clear both port registers */
+	sw_w32(0, RTL931X_SMI_INDRT_ACCESS_CTRL_2);
+	sw_w32(0, RTL931X_SMI_INDRT_ACCESS_CTRL_2 + 4);
+	sw_w32_mask(0, BIT(port), RTL931X_SMI_INDRT_ACCESS_CTRL_2+ (port % 32) * 4);
+
+	sw_w32_mask(0xffff0000, val << 16, RTL931X_SMI_INDRT_ACCESS_CTRL_3);
+
+	v = reg << 6 | page << 11 ;
+	sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0);
+
+	sw_w32(0x1ff, RTL931X_SMI_INDRT_ACCESS_CTRL_1);
+
+	v |= 1 << 3 | 1; /* Write operation and execute */
+	sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0);
+
+	do {
+	} while (sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0) & 0x1);
+
+	if (sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0) & 0x2)
+		err = -EIO;
+
+	mutex_unlock(&smi_lock);
+	return err;
+}
+
+int rtl931x_read_phy(u32 port, u32 page, u32 reg, u32 *val)
+{
+	u32 v;
+
+	if (port > 63 || page > 4095 || reg > 31)
+		return -ENOTSUPP;
+
+	mutex_lock(&smi_lock);
+
+	sw_w32_mask(0xffff, port, RTL931X_SMI_INDRT_ACCESS_CTRL_3);
+	v = reg << 6 | page << 11; // TODO: ACCESS Offset? Park page
+	sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0);
+
+	sw_w32(0x1ff, RTL931X_SMI_INDRT_ACCESS_CTRL_1);
+
+	v |= 1;
+	sw_w32(v, RTL931X_SMI_INDRT_ACCESS_CTRL_0);
+
+	do {
+	} while (sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_0) & 0x1);
+
+	*val = (sw_r32(RTL931X_SMI_INDRT_ACCESS_CTRL_3) & 0xffff0000) >> 16;
+
+	pr_info("%s: port %d, page: %d, reg: %x, val: %x\n", __func__, port, page, reg, *val);
+
+	mutex_unlock(&smi_lock);
+	return 0;
+}
+
+void rtl931x_print_matrix(void)
+{
+	volatile u64 *ptr = RTL838X_SW_BASE + RTL839X_PORT_ISO_CTRL(0);
+	int i;
+
+	for (i = 0; i < 52; i += 4)
+		pr_info("> %16llx %16llx %16llx %16llx\n",
+			ptr[i + 0], ptr[i + 1], ptr[i + 2], ptr[i + 3]);
+	pr_info("CPU_PORT> %16llx\n", ptr[52]);
+}
+
+const struct rtl838x_reg rtl931x_reg = {
+	.mask_port_reg_be = rtl839x_mask_port_reg_be,
+	.set_port_reg_be = rtl839x_set_port_reg_be,
+	.get_port_reg_be = rtl839x_get_port_reg_be,
+	.mask_port_reg_le = rtl839x_mask_port_reg_le,
+	.set_port_reg_le = rtl839x_set_port_reg_le,
+	.get_port_reg_le = rtl839x_get_port_reg_le,
+	.stat_port_rst = RTL931X_STAT_PORT_RST,
+	.stat_rst = RTL931X_STAT_RST,
+	.stat_port_std_mib = 0,  // Not defined
+	.l2_ctrl_0 = RTL931X_L2_CTRL,
+	.l2_ctrl_1 = RTL931X_L2_AGE_CTRL,
+	.l2_port_aging_out = RTL931X_L2_PORT_AGE_CTRL,
+	// .smi_poll_ctrl does not exist
+	.l2_tbl_flush_ctrl = RTL931X_L2_TBL_FLUSH_CTRL,
+	.exec_tbl0_cmd = rtl931x_exec_tbl0_cmd,
+	.exec_tbl1_cmd = rtl931x_exec_tbl1_cmd,
+	.tbl_access_data_0 = rtl931x_tbl_access_data_0,
+	.isr_glb_src = RTL931X_ISR_GLB_SRC,
+	.isr_port_link_sts_chg = RTL931X_ISR_PORT_LINK_STS_CHG,
+	.imr_port_link_sts_chg = RTL931X_IMR_PORT_LINK_STS_CHG,
+	// imr_glb does not exist on RTL931X
+	.vlan_tables_read = rtl931x_vlan_tables_read,
+	.vlan_set_tagged = rtl931x_vlan_set_tagged,
+	.vlan_set_untagged = rtl931x_vlan_set_untagged,
+	.vlan_profile_dump = rtl931x_vlan_profile_dump,
+	.stp_get = rtl931x_stp_get,
+	.stp_set = rtl931x_stp_set,
+	.mac_force_mode_ctrl = rtl931x_mac_force_mode_ctrl,
+	.mac_port_ctrl = rtl931x_mac_port_ctrl,
+	.l2_port_new_salrn = rtl931x_l2_port_new_salrn,
+	.l2_port_new_sa_fwd = rtl931x_l2_port_new_sa_fwd,
+	.mir_ctrl = RTL931X_MIR_CTRL,
+	.mir_dpm = RTL931X_MIR_DPM_CTRL,
+	.mir_spm = RTL931X_MIR_SPM_CTRL,
+	.mac_link_sts = RTL931X_MAC_LINK_STS,
+	.mac_link_dup_sts = RTL931X_MAC_LINK_DUP_STS,
+	.mac_link_spd_sts = rtl931x_mac_link_spd_sts,
+	.mac_rx_pause_sts = RTL931X_MAC_RX_PAUSE_STS,
+	.mac_tx_pause_sts = RTL931X_MAC_TX_PAUSE_STS,
+	.read_l2_entry_using_hash = rtl931x_read_l2_entry_using_hash,
+	.read_cam = rtl931x_read_cam,
+	.vlan_port_egr_filter = RTL931X_VLAN_PORT_EGR_FLTR(0),
+	.vlan_port_igr_filter = RTL931X_VLAN_PORT_IGR_FLTR(0),
+//	.vlan_port_pb = does not exist
+	.vlan_port_tag_sts_ctrl = RTL931X_VLAN_PORT_TAG_CTRL,
+	.trk_mbr_ctr = rtl931x_trk_mbr_ctr,
+};
+
diff --git a/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.h b/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.h
index 4366e6b64f..d7b4317cbb 100644
--- a/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.h
+++ b/target/linux/realtek/files-5.4/drivers/net/ethernet/rtl838x_eth.h
@@ -7,37 +7,85 @@
  * Register definition
  */
 
-#define RTL838X_CPU_PORT			28
-#define RTL839X_CPU_PORT			52
-
+/* Per port MAC control */
 #define RTL838X_MAC_PORT_CTRL			(0xd560)
 #define RTL839X_MAC_PORT_CTRL			(0x8004)
+#define RTL930X_MAC_L2_PORT_CTRL		(0x3268)
+#define RTL930X_MAC_PORT_CTRL			(0x3260)
+#define RTL931X_MAC_L2_PORT_CTRL		(0x6000)
+#define RTL931X_MAC_PORT_CTRL			(0x6004)
+
+/* DMA interrupt control and status registers */
+#define RTL838X_DMA_IF_CTRL			(0x9f58)
 #define RTL838X_DMA_IF_INTR_STS			(0x9f54)
-#define RTL839X_DMA_IF_INTR_STS			(0x7868)
 #define RTL838X_DMA_IF_INTR_MSK			(0x9f50)
-#define RTL839X_DMA_IF_INTR_MSK			(0x7864)
-#define RTL838X_DMA_IF_CTRL			(0x9f58)
+
 #define RTL839X_DMA_IF_CTRL			(0x786c)
-#define RTL838X_RST_GLB_CTRL_0			(0x003c)
+#define RTL839X_DMA_IF_INTR_STS			(0x7868)
+#define RTL839X_DMA_IF_INTR_MSK			(0x7864)
+
+#define RTL930X_DMA_IF_CTRL			(0xe028)
+#define RTL930X_DMA_IF_INTR_RX_RUNOUT_STS	(0xe01C)
+#define RTL930X_DMA_IF_INTR_RX_DONE_STS		(0xe020)
+#define RTL930X_DMA_IF_INTR_TX_DONE_STS		(0xe024)
+#define RTL930X_DMA_IF_INTR_RX_RUNOUT_MSK	(0xe010)
+#define RTL930X_DMA_IF_INTR_RX_DONE_MSK		(0xe014)
+#define RTL930X_DMA_IF_INTR_TX_DONE_MSK		(0xe018)
+#define RTL930X_L2_NTFY_IF_INTR_MSK		(0xe04C)
+#define RTL930X_L2_NTFY_IF_INTR_STS		(0xe050)
+
+/* TODO: RTL931X_DMA_IF_CTRL has different bits meanings */
+#define RTL931X_DMA_IF_CTRL			(0x0928)
+#define RTL931X_DMA_IF_INTR_RX_RUNOUT_STS	(0x091c)
+#define RTL931X_DMA_IF_INTR_RX_DONE_STS		(0x0920)
+#define RTL931X_DMA_IF_INTR_TX_DONE_STS		(0x0924)
+#define RTL931X_DMA_IF_INTR_RX_RUNOUT_MSK	(0x0910)
+#define RTL931X_DMA_IF_INTR_RX_DONE_MSK		(0x0914)
+#define RTL931X_DMA_IF_INTR_TX_DONE_MSK		(0x0918)
+#define RTL931X_L2_NTFY_IF_INTR_MSK		(0x09E4)
+#define RTL931X_L2_NTFY_IF_INTR_STS		(0x09E8)
+
 #define RTL838X_MAC_FORCE_MODE_CTRL		(0xa104)
 #define RTL839X_MAC_FORCE_MODE_CTRL		(0x02bc)
+#define RTL930X_MAC_FORCE_MODE_CTRL		(0xCA1C)
+#define RTL931X_MAC_FORCE_MODE_CTRL		(0x0ddc)
 
 /* MAC address settings */
 #define RTL838X_MAC				(0xa9ec)
 #define RTL839X_MAC				(0x02b4)
 #define RTL838X_MAC_ALE				(0x6b04)
 #define RTL838X_MAC2				(0xa320)
+#define RTL930X_MAC_L2_ADDR_CTRL		(0xC714)
+#define RTL931X_MAC_L2_ADDR_CTRL		(0x135c)
 
+/* Ringbuffer setup */
 #define RTL838X_DMA_RX_BASE			(0x9f00)
 #define RTL839X_DMA_RX_BASE			(0x780c)
+#define RTL930X_DMA_RX_BASE			(0xdf00)
+#define RTL931X_DMA_RX_BASE			(0x0800)
+
 #define RTL838X_DMA_TX_BASE			(0x9f40)
 #define RTL839X_DMA_TX_BASE			(0x784c)
+#define RTL930X_DMA_TX_BASE			(0xe000)
+#define RTL931X_DMA_TX_BASE			(0x0900)
+
 #define RTL838X_DMA_IF_RX_RING_SIZE		(0xB7E4)
 #define RTL839X_DMA_IF_RX_RING_SIZE		(0x6038)
+#define RTL930X_DMA_IF_RX_RING_SIZE		(0x7C60)
+#define RTL931X_DMA_IF_RX_RING_SIZE		(0x2080)
+
 #define RTL838X_DMA_IF_RX_RING_CNTR		(0xB7E8)
 #define RTL839X_DMA_IF_RX_RING_CNTR		(0x603c)
+#define RTL930X_DMA_IF_RX_RING_CNTR		(0x7C8C)
+#define RTL931X_DMA_IF_RX_RING_CNTR		(0x20AC)
+
 #define RTL838X_DMA_IF_RX_CUR			(0x9F20)
 #define RTL839X_DMA_IF_RX_CUR			(0x782c)
+#define RTL930X_DMA_IF_RX_CUR			(0xdf80)
+#define RTL931X_DMA_IF_RX_CUR			(0x0880)
+
+#define RTL838X_DMA_IF_TX_CUR_DESC_ADDR_CTRL	(0x9F48)
+#define RTL930X_DMA_IF_TX_CUR_DESC_ADDR_CTRL	(0xE008)
 
 #define RTL838X_DMY_REG31			(0x3b28)
 #define RTL838X_SDS_MODE_SEL			(0x0028)
@@ -47,50 +95,56 @@
 #define RTL838X_SDS4_REG28			(0xef80)
 #define RTL838X_SDS4_DUMMY0			(0xef8c)
 #define RTL838X_SDS5_EXT_REG6			(0xf18c)
-#define RTL838X_PORT_ISO_CTRL(port)		(0x4100 + ((port) << 2))
-#define RTL838X_STAT_PORT_STD_MIB(port)		(0x1200 + (((port) << 8)))
-#define RTL838X_STAT_RST			(0x3100)
-#define RTL838X_STAT_CTRL			(0x3108)
 
-/* Registers of the internal Serdes of the 8380 */
-#define MAPLE_SDS4_REG0r			RTL838X_SDS4_REG28
-#define MAPLE_SDS5_REG0r			(RTL838X_SDS4_REG28 + 0x100)
-#define MAPLE_SDS4_REG3r			RTL838X_SDS4_DUMMY0
-#define MAPLE_SDS5_REG3r			(RTL838X_SDS4_REG28 + 0x100)
-#define MAPLE_SDS4_FIB_REG0r			(RTL838X_SDS4_REG28 + 0x880)
-#define MAPLE_SDS5_FIB_REG0r			(RTL838X_SDS4_REG28 + 0x980)
-
-/* VLAN registers */
-#define RTL838X_VLAN_PROFILE(idx)		(0x3A88 + ((idx) << 2))
-#define RTL838X_VLAN_PORT_EGR_FLTR		(0x3A84)
-#define RTL838X_VLAN_PORT_PB_VLAN(port)		(0x3C00 + ((port) << 2))
-#define RTL838X_VLAN_PORT_IGR_FLTR_0		(0x3A7C)
-#define RTL838X_VLAN_PORT_IGR_FLTR_1		(0x3A7C + 4)
-#define RTL838X_TBL_ACCESS_CTRL_0		(0x6914)
-#define RTL838X_TBL_ACCESS_DATA_0(idx)		(0x6918 + ((idx) << 2))
-#define RTL838X_TBL_ACCESS_CTRL_1		(0xA4C8)
-#define RTL838X_TBL_ACCESS_DATA_1(idx)		(0xA4CC + ((idx) << 2))
+/* L2 features */
 #define RTL839X_TBL_ACCESS_L2_CTRL		(0x1180)
 #define RTL839X_TBL_ACCESS_L2_DATA(idx)		(0x1184 + ((idx) << 2))
-/* MAC handling */
+#define RTL838X_TBL_ACCESS_CTRL_0		(0x6914)
+#define RTL838X_TBL_ACCESS_DATA_0(idx)		(0x6918 + ((idx) << 2))
+
+/* MAC-side link state handling */
 #define RTL838X_MAC_LINK_STS			(0xa188)
 #define RTL839X_MAC_LINK_STS			(0x0390)
+#define RTL930X_MAC_LINK_STS			(0xCB10)
+#define RTL931X_MAC_LINK_STS			(0x0ec0)
+
 #define RTL838X_MAC_LINK_SPD_STS		(0xa190)
 #define RTL839X_MAC_LINK_SPD_STS		(0x03a0)
+#define RTL930X_MAC_LINK_SPD_STS		(0xCB18)
+#define RTL931X_MAC_LINK_SPD_STS		(0x0ed0)
+
 #define RTL838X_MAC_LINK_DUP_STS		(0xa19c)
 #define RTL839X_MAC_LINK_DUP_STS		(0x03b0)
+#define RTL930X_MAC_LINK_DUP_STS		(0xCB28)
+#define RTL931X_MAC_LINK_DUP_STS		(0x0ef0)
+
 // TODO: RTL8390_MAC_LINK_MEDIA_STS_ADDR ???
+
 #define RTL838X_MAC_TX_PAUSE_STS		(0xa1a0)
 #define RTL839X_MAC_TX_PAUSE_STS		(0x03b8)
+#define RTL930X_MAC_TX_PAUSE_STS		(0xCB2C)
+#define RTL931X_MAC_TX_PAUSE_STS		(0x0ef8)
+
 #define RTL838X_MAC_RX_PAUSE_STS		(0xa1a4)
-#define RTL839X_MAC_RX_PAUSE_STS		(0x03c0)
+#define RTL839X_MAC_RX_PAUSE_STS		(0xCB30)
+#define RTL930X_MAC_RX_PAUSE_STS		(0xC2F8)
+#define RTL931X_MAC_RX_PAUSE_STS		(0x0f00)
+
 #define RTL838X_EEE_TX_TIMER_GIGA_CTRL		(0xaa04)
 #define RTL838X_EEE_TX_TIMER_GELITE_CTRL	(0xaa08)
+
+#define RTL930X_L2_UNKN_UC_FLD_PMSK		(0x9064)
+
 #define RTL839X_MAC_GLB_CTRL			(0x02a8)
 #define RTL839X_SCHED_LB_TICK_TKN_CTRL		(0x60f8)
 
 #define RTL838X_L2_TBL_FLUSH_CTRL		(0x3370)
 #define RTL839X_L2_TBL_FLUSH_CTRL		(0x3ba0)
+#define RTL930X_L2_TBL_FLUSH_CTRL		(0x9404)
+#define RTL931X_L2_TBL_FLUSH_CTRL		(0xCD9C)
+
+#define RTL930X_L2_PORT_SABLK_CTRL		(0x905c)
+#define RTL930X_L2_PORT_DABLK_CTRL		(0x9060)
 
 /* MAC link state bits */
 #define FORCE_EN				(1 << 0)
@@ -100,25 +154,48 @@
 #define TX_PAUSE_EN				(1 << 6)
 #define RX_PAUSE_EN				(1 << 7)
 
-/* RTL839X L2 Notification DMA interface */
+/* L2 Notification DMA interface */
 #define RTL839X_DMA_IF_NBUF_BASE_DESC_ADDR_CTRL	(0x785C)
 #define RTL839X_L2_NOTIFICATION_CTRL		(0x7808)
+#define RTL931X_L2_NTFY_RING_BASE_ADDR		(0x09DC)
+#define RTL931X_L2_NTFY_RING_CUR_ADDR		(0x09E0)
+#define RTL839X_L2_NOTIFICATION_CTRL		(0x7808)
+#define RTL931X_L2_NTFY_CTRL			(0xCDC8)
 #define RTL838X_L2_CTRL_0			(0x3200)
 #define RTL839X_L2_CTRL_0			(0x3800)
+#define RTL930X_L2_CTRL				(0x8FD8)
+#define RTL931X_L2_CTRL				(0xC800)
 
 /* TRAPPING to CPU-PORT */
 #define RTL838X_SPCL_TRAP_IGMP_CTRL		(0x6984)
-#define RTL839X_SPCL_TRAP_IGMP_CTRL		(0x1058)
 #define RTL838X_RMA_CTRL_0			(0x4300)
 #define RTL838X_RMA_CTRL_1			(0x4304)
 #define RTL839X_RMA_CTRL_0			(0x1200)
+
+#define RTL839X_SPCL_TRAP_IGMP_CTRL		(0x1058)
 #define RTL839X_RMA_CTRL_1			(0x1204)
 #define RTL839X_RMA_CTRL_2			(0x1208)
 #define RTL839X_RMA_CTRL_3			(0x120C)
 
+#define RTL930X_RMA_CTRL_0			(0x9E60)
+#define RTL930X_RMA_CTRL_1			(0x9E64)
+#define RTL930X_RMA_CTRL_2			(0x9E68)
+
+#define RTL931X_RMA_CTRL_0			(0x8800)
+#define RTL931X_RMA_CTRL_1			(0x8804)
+#define RTL931X_RMA_CTRL_2			(0x8808)
+
+/* Advanced SMI control for clause 45 PHYs */
+#define RTL930X_SMI_MAC_TYPE_CTRL		(0xCA04)
+#define RTL930X_SMI_PORT24_27_ADDR_CTRL		(0xCB90)
+#define RTL930X_SMI_PORT0_15_POLLING_SEL	(0xCA08)
+#define RTL930X_SMI_PORT16_27_POLLING_SEL	(0xCA0C)
+
 /* Registers of the internal Serdes of the 8390 */
 #define RTL839X_SDS12_13_XSG0			(0xB800)
 
+/* Registers of the internal Serdes of the 8380 */
+#define RTL838X_SDS4_FIB_REG0			(0xF800)
 
 inline int rtl838x_mac_port_ctrl(int p)
 {
@@ -130,44 +207,39 @@ inline int rtl839x_mac_port_ctrl(int p)
 	return RTL839X_MAC_PORT_CTRL + (p << 7);
 }
 
-static inline int rtl838x_mac_force_mode_ctrl(int p)
-{
-	return RTL838X_MAC_FORCE_MODE_CTRL + (p << 2);
-}
-
-static inline int rtl839x_mac_force_mode_ctrl(int p)
-{
-	return RTL839X_MAC_FORCE_MODE_CTRL + (p << 2);
-}
+/* On the RTL931XX, the functionality of the MAC port control register is split up
+ * into RTL931X_MAC_L2_PORT_CTRL and RTL931X_MAC_PORT_CTRL the functionality used
+ * by the Ethernet driver is in the same bits now in RTL931X_MAC_L2_PORT_CTRL
+ */
 
-inline int rtl838x_dma_rx_base(int i)
+inline int rtl930x_mac_port_ctrl(int p)
 {
-	return RTL838X_DMA_RX_BASE + (i << 2);
+	return RTL930X_MAC_L2_PORT_CTRL + (p << 6);
 }
 
-inline int rtl839x_dma_rx_base(int i)
+inline int rtl931x_mac_port_ctrl(int p)
 {
-	return RTL839X_DMA_RX_BASE + (i << 2);
+	return RTL931X_MAC_L2_PORT_CTRL + (p << 7);
 }
 
-inline int rtl838x_dma_tx_base(int i)
+inline int rtl838x_dma_if_rx_ring_size(int i)
 {
-	return RTL838X_DMA_TX_BASE + (i << 2);
+	return RTL838X_DMA_IF_RX_RING_SIZE + ((i >> 3) << 2);
 }
 
-inline int rtl839x_dma_tx_base(int i)
+inline int rtl839x_dma_if_rx_ring_size(int i)
 {
-	return RTL839X_DMA_TX_BASE + (i << 2);
+	return RTL839X_DMA_IF_RX_RING_SIZE + ((i >> 3) << 2);
 }
 
-inline int rtl838x_dma_if_rx_ring_size(int i)
+inline int rtl930x_dma_if_rx_ring_size(int i)
 {
-	return RTL838X_DMA_IF_RX_RING_SIZE + ((i >> 3) << 2);
+	return RTL930X_DMA_IF_RX_RING_SIZE + ((i / 3) << 2);
 }
 
-inline int rtl839x_dma_if_rx_ring_size(int i)
+inline int rtl931x_dma_if_rx_ring_size(int i)
 {
-	return RTL839X_DMA_IF_RX_RING_SIZE + ((i >> 3) << 2);
+	return RTL931X_DMA_IF_RX_RING_SIZE + ((i / 3) << 2);
 }
 
 inline int rtl838x_dma_if_rx_ring_cntr(int i)
@@ -180,35 +252,54 @@ inline int rtl839x_dma_if_rx_ring_cntr(int i)
 	return RTL839X_DMA_IF_RX_RING_CNTR + ((i >> 3) << 2);
 }
 
-
-inline int rtl838x_dma_if_rx_cur(int i)
+inline int rtl930x_dma_if_rx_ring_cntr(int i)
 {
-	return RTL838X_DMA_IF_RX_CUR + (i << 2);
+	return RTL930X_DMA_IF_RX_RING_CNTR + ((i / 3) << 2);
 }
 
-inline int rtl839x_dma_if_rx_cur(int i)
+inline int rtl931x_dma_if_rx_ring_cntr(int i)
 {
-	return RTL839X_DMA_IF_RX_CUR + (i << 2);
+	return RTL931X_DMA_IF_RX_RING_CNTR + ((i / 3) << 2);
 }
 
 inline u32 rtl838x_get_mac_link_sts(int port)
 {
-	return (sw_r32(RTL838X_MAC_LINK_STS) & (1 << port));
+	return (sw_r32(RTL838X_MAC_LINK_STS) & BIT(port));
 }
 
 inline u32 rtl839x_get_mac_link_sts(int p)
 {
-	return (sw_r32(RTL839X_MAC_LINK_STS + ((p >> 5) << 2)) & (1 << p));
+	return (sw_r32(RTL839X_MAC_LINK_STS + ((p >> 5) << 2)) & BIT(p % 32));
+}
+
+inline u32 rtl930x_get_mac_link_sts(int port)
+{
+	return (sw_r32(RTL930X_MAC_LINK_STS) & BIT(port));
+}
+
+inline u32 rtl931x_get_mac_link_sts(int p)
+{
+	return (sw_r32(RTL931X_MAC_LINK_STS + ((p >> 5) << 2)) & BIT(p % 32));
 }
 
 inline u32 rtl838x_get_mac_link_dup_sts(int port)
 {
-	return (sw_r32(RTL838X_MAC_LINK_DUP_STS) & (1 << port));
+	return (sw_r32(RTL838X_MAC_LINK_DUP_STS) & BIT(port));
 }
 
 inline u32 rtl839x_get_mac_link_dup_sts(int p)
 {
-	return (sw_r32(RTL839X_MAC_LINK_DUP_STS + ((p >> 5) << 2)) & (1 << p));
+	return (sw_r32(RTL839X_MAC_LINK_DUP_STS + ((p >> 5) << 2)) & BIT(p % 32));
+}
+
+inline u32 rtl930x_get_mac_link_dup_sts(int port)
+{
+	return (sw_r32(RTL930X_MAC_LINK_DUP_STS) & BIT(port));
+}
+
+inline u32 rtl931x_get_mac_link_dup_sts(int p)
+{
+	return (sw_r32(RTL931X_MAC_LINK_DUP_STS + ((p >> 5) << 2)) & BIT(p % 32));
 }
 
 inline u32 rtl838x_get_mac_link_spd_sts(int port)
@@ -229,6 +320,25 @@ inline u32 rtl839x_get_mac_link_spd_sts(int port)
 	return (speed & 0x3);
 }
 
+
+inline u32 rtl930x_get_mac_link_spd_sts(int port)
+{
+	int r = RTL930X_MAC_LINK_SPD_STS + ((port / 10) << 2);
+	u32 speed = sw_r32(r);
+
+	speed >>= (port % 10) * 3;
+	return (speed & 0x7);
+}
+
+inline u32 rtl931x_get_mac_link_spd_sts(int port)
+{
+	int r = RTL931X_MAC_LINK_SPD_STS + ((port >> 3) << 2);
+	u32 speed = sw_r32(r);
+
+	speed >>= (port % 8) << 2;
+	return (speed & 0xf);
+}
+
 inline u32 rtl838x_get_mac_rx_pause_sts(int port)
 {
 	return (sw_r32(RTL838X_MAC_RX_PAUSE_STS) & (1 << port));
@@ -236,7 +346,17 @@ inline u32 rtl838x_get_mac_rx_pause_sts(int port)
 
 inline u32 rtl839x_get_mac_rx_pause_sts(int p)
 {
-	return (sw_r32(RTL839X_MAC_RX_PAUSE_STS + ((p >> 5) << 2)) & (1 << p));
+	return (sw_r32(RTL839X_MAC_RX_PAUSE_STS + ((p >> 5) << 2)) & BIT(p % 32));
+}
+
+inline u32 rtl930x_get_mac_rx_pause_sts(int port)
+{
+	return (sw_r32(RTL930X_MAC_RX_PAUSE_STS) & (1 << port));
+}
+
+inline u32 rtl931x_get_mac_rx_pause_sts(int p)
+{
+	return (sw_r32(RTL931X_MAC_RX_PAUSE_STS + ((p >> 5) << 2)) & BIT(p % 32));
 }
 
 inline u32 rtl838x_get_mac_tx_pause_sts(int port)
@@ -246,21 +366,42 @@ inline u32 rtl838x_get_mac_tx_pause_sts(int port)
 
 inline u32 rtl839x_get_mac_tx_pause_sts(int p)
 {
-	return (sw_r32(RTL839X_MAC_TX_PAUSE_STS + ((p >> 5) << 2)) & (1 << p));
+	return (sw_r32(RTL839X_MAC_TX_PAUSE_STS + ((p >> 5) << 2)) & BIT(p % 32));
+}
+
+inline u32 rtl930x_get_mac_tx_pause_sts(int port)
+{
+	return (sw_r32(RTL930X_MAC_TX_PAUSE_STS) & (1 << port));
+}
+
+inline u32 rtl931x_get_mac_tx_pause_sts(int p)
+{
+	return (sw_r32(RTL931X_MAC_TX_PAUSE_STS + ((p >> 5) << 2)) & BIT(p % 32));
 }
 
+struct p_hdr;
+struct dsa_tag;
 
 struct rtl838x_reg {
+	irqreturn_t (*net_irq)(int irq, void *dev_id);
 	int (*mac_port_ctrl)(int port);
 	int dma_if_intr_sts;
 	int dma_if_intr_msk;
+	int dma_if_intr_rx_runout_sts;
+	int dma_if_intr_rx_done_sts;
+	int dma_if_intr_tx_done_sts;
+	int dma_if_intr_rx_runout_msk;
+	int dma_if_intr_rx_done_msk;
+	int dma_if_intr_tx_done_msk;
+	int l2_ntfy_if_intr_sts;
+	int l2_ntfy_if_intr_msk;
 	int dma_if_ctrl;
-	int  (*mac_force_mode_ctrl)(int port);
-	int  (*dma_rx_base)(int ring);
-	int  (*dma_tx_base)(int ring);
-	int  (*dma_if_rx_ring_size)(int ring);
-	int  (*dma_if_rx_ring_cntr)(int ring);
-	int  (*dma_if_rx_cur)(int ring);
+	int mac_force_mode_ctrl;
+	int dma_rx_base;
+	int dma_tx_base;
+	int (*dma_if_rx_ring_size)(int ring);
+	int (*dma_if_rx_ring_cntr)(int ring);
+	int dma_if_rx_cur;
 	int rst_glb_ctrl;
 	u32 (*get_mac_link_sts)(int port);
 	u32 (*get_mac_link_dup_sts)(int port);
@@ -269,11 +410,19 @@ struct rtl838x_reg {
 	u32 (*get_mac_tx_pause_sts)(int port);
 	int mac;
 	int l2_tbl_flush_ctrl;
+	void (*update_cntr)(int r, int work_done);
+	void (*create_tx_header)(struct p_hdr *h, int dest_port, int prio);
+	bool (*decode_tag)(struct p_hdr *h, struct dsa_tag *tag);
 };
 
 int rtl838x_write_phy(u32 port, u32 page, u32 reg, u32 val);
 int rtl838x_read_phy(u32 port, u32 page, u32 reg, u32 *val);
 int rtl839x_write_phy(u32 port, u32 page, u32 reg, u32 val);
 int rtl839x_read_phy(u32 port, u32 page, u32 reg, u32 *val);
+int rtl930x_write_phy(u32 port, u32 page, u32 reg, u32 val);
+int rtl930x_read_phy(u32 port, u32 page, u32 reg, u32 *val);
+int rtl931x_write_phy(u32 port, u32 page, u32 reg, u32 val);
+int rtl931x_read_phy(u32 port, u32 page, u32 reg, u32 *val);
+void rtl9300_sds_power(int sds_num, int val);
 
 #endif /* _RTL838X_ETH_H */