kernel: bump 4.19 to 4.19.106

Refreshed all patches.

Remove upstreamed:
- 950-0786-leds-pca963x-Fix-open-drain-initialization.patch

Compile-tested on: cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>

9 files changed, 38 insertions, 103 deletions

diff --git a/target/linux/ath79/patches-4.19/0050-v5.1-drivers-provide-devm_platform_ioremap_resource.patch b/target/linux/ath79/patches-4.19/0050-v5.1-drivers-provide-devm_platform_ioremap_resource.patch
index a52addbf95..32c960f320 100644
--- a/target/linux/ath79/patches-4.19/0050-v5.1-drivers-provide-devm_platform_ioremap_resource.patch
+++ b/target/linux/ath79/patches-4.19/0050-v5.1-drivers-provide-devm_platform_ioremap_resource.patch
@@ -22,7 +22,7 @@ Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
 
 --- a/drivers/base/platform.c
 +++ b/drivers/base/platform.c
-@@ -80,6 +80,24 @@ struct resource *platform_get_resource(s
+@@ -81,6 +81,24 @@ struct resource *platform_get_resource(s
  EXPORT_SYMBOL_GPL(platform_get_resource);
  
  /**
diff --git a/target/linux/ath79/patches-4.19/0061-tty-serial-ar933x-uart-rs485-gpio.patch b/target/linux/ath79/patches-4.19/0061-tty-serial-ar933x-uart-rs485-gpio.patch
index c0edac906a..7bbcaa08a6 100644
--- a/target/linux/ath79/patches-4.19/0061-tty-serial-ar933x-uart-rs485-gpio.patch
+++ b/target/linux/ath79/patches-4.19/0061-tty-serial-ar933x-uart-rs485-gpio.patch
@@ -32,11 +32,9 @@ v2: use bool to indicate ongoing half-duplex send, use it afterwards
  drivers/tty/serial/ar933x_uart.c | 113 +++++++++++++++++++++++++++++--
  2 files changed, 108 insertions(+), 6 deletions(-)
 
-diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
-index 52eaac21ff9f..b675924138e0 100644
 --- a/drivers/tty/serial/Kconfig
 +++ b/drivers/tty/serial/Kconfig
-@@ -1279,6 +1279,7 @@ config SERIAL_AR933X
+@@ -1296,6 +1296,7 @@ config SERIAL_AR933X
  	tristate "AR933X serial port support"
  	depends on HAVE_CLK && ATH79
  	select SERIAL_CORE
@@ -44,8 +42,6 @@ index 52eaac21ff9f..b675924138e0 100644
  	help
  	  If you have an Atheros AR933X SOC based board and want to use the
  	  built-in UART of the SoC, say Y to this option.
-diff --git a/drivers/tty/serial/ar933x_uart.c b/drivers/tty/serial/ar933x_uart.c
-index ea12f10610b6..7e7f1398019f 100644
 --- a/drivers/tty/serial/ar933x_uart.c
 +++ b/drivers/tty/serial/ar933x_uart.c
 @@ -13,6 +13,7 @@
@@ -74,7 +70,7 @@ index ea12f10610b6..7e7f1398019f 100644
  };
  
  static inline unsigned int ar933x_uart_read(struct ar933x_uart_port *up,
-@@ -100,6 +105,18 @@ static inline void ar933x_uart_stop_tx_interrupt(struct ar933x_uart_port *up)
+@@ -100,6 +105,18 @@ static inline void ar933x_uart_stop_tx_i
  	ar933x_uart_write(up, AR933X_UART_INT_EN_REG, up->ier);
  }
  
@@ -93,7 +89,7 @@ index ea12f10610b6..7e7f1398019f 100644
  static inline void ar933x_uart_putc(struct ar933x_uart_port *up, int ch)
  {
  	unsigned int rdata;
-@@ -125,11 +142,21 @@ static unsigned int ar933x_uart_tx_empty(struct uart_port *port)
+@@ -125,11 +142,21 @@ static unsigned int ar933x_uart_tx_empty
  
  static unsigned int ar933x_uart_get_mctrl(struct uart_port *port)
  {
@@ -116,7 +112,7 @@ index ea12f10610b6..7e7f1398019f 100644
  }
  
  static void ar933x_uart_start_tx(struct uart_port *port)
-@@ -140,6 +167,37 @@ static void ar933x_uart_start_tx(struct uart_port *port)
+@@ -140,6 +167,37 @@ static void ar933x_uart_start_tx(struct
  	ar933x_uart_start_tx_interrupt(up);
  }
  
@@ -154,7 +150,7 @@ index ea12f10610b6..7e7f1398019f 100644
  static void ar933x_uart_stop_tx(struct uart_port *port)
  {
  	struct ar933x_uart_port *up =
-@@ -153,8 +211,7 @@ static void ar933x_uart_stop_rx(struct uart_port *port)
+@@ -153,8 +211,7 @@ static void ar933x_uart_stop_rx(struct u
  	struct ar933x_uart_port *up =
  		container_of(port, struct ar933x_uart_port, port);
  
@@ -164,7 +160,7 @@ index ea12f10610b6..7e7f1398019f 100644
  }
  
  static void ar933x_uart_break_ctl(struct uart_port *port, int break_state)
-@@ -336,11 +393,20 @@ static void ar933x_uart_rx_chars(struct ar933x_uart_port *up)
+@@ -336,11 +393,20 @@ static void ar933x_uart_rx_chars(struct
  static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
  {
  	struct circ_buf *xmit = &up->port.state->xmit;
@@ -185,7 +181,7 @@ index ea12f10610b6..7e7f1398019f 100644
  	count = up->port.fifosize;
  	do {
  		unsigned int rdata;
-@@ -368,8 +434,14 @@ static void ar933x_uart_tx_chars(struct ar933x_uart_port *up)
+@@ -368,8 +434,14 @@ static void ar933x_uart_tx_chars(struct
  	if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
  		uart_write_wakeup(&up->port);
  
@@ -201,7 +197,7 @@ index ea12f10610b6..7e7f1398019f 100644
  }
  
  static irqreturn_t ar933x_uart_interrupt(int irq, void *dev_id)
-@@ -427,8 +499,7 @@ static int ar933x_uart_startup(struct uart_port *port)
+@@ -427,8 +499,7 @@ static int ar933x_uart_startup(struct ua
  		AR933X_UART_CS_TX_READY_ORIDE | AR933X_UART_CS_RX_READY_ORIDE);
  
  	/* Enable RX interrupts */
@@ -211,7 +207,7 @@ index ea12f10610b6..7e7f1398019f 100644
  
  	spin_unlock_irqrestore(&up->port.lock, flags);
  
-@@ -511,6 +582,21 @@ static const struct uart_ops ar933x_uart_ops = {
+@@ -511,6 +582,21 @@ static const struct uart_ops ar933x_uart
  	.verify_port	= ar933x_uart_verify_port,
  };
  
@@ -233,7 +229,7 @@ index ea12f10610b6..7e7f1398019f 100644
  #ifdef CONFIG_SERIAL_AR933X_CONSOLE
  static struct ar933x_uart_port *
  ar933x_console_ports[CONFIG_SERIAL_AR933X_NR_UARTS];
-@@ -680,6 +766,8 @@ static int ar933x_uart_probe(struct platform_device *pdev)
+@@ -680,6 +766,8 @@ static int ar933x_uart_probe(struct plat
  		goto err_disable_clk;
  	}
  
@@ -242,7 +238,7 @@ index ea12f10610b6..7e7f1398019f 100644
  	port->mapbase = mem_res->start;
  	port->line = id;
  	port->irq = irq_res->start;
-@@ -690,6 +778,7 @@ static int ar933x_uart_probe(struct platform_device *pdev)
+@@ -690,6 +778,7 @@ static int ar933x_uart_probe(struct plat
  	port->regshift = 2;
  	port->fifosize = AR933X_UART_FIFO_SIZE;
  	port->ops = &ar933x_uart_ops;
@@ -250,7 +246,7 @@ index ea12f10610b6..7e7f1398019f 100644
  
  	baud = ar933x_uart_get_baud(port->uartclk, AR933X_UART_MAX_SCALE, 1);
  	up->min_baud = max_t(unsigned int, baud, AR933X_UART_MIN_BAUD);
-@@ -697,6 +786,18 @@ static int ar933x_uart_probe(struct platform_device *pdev)
+@@ -697,6 +786,18 @@ static int ar933x_uart_probe(struct plat
  	baud = ar933x_uart_get_baud(port->uartclk, 0, AR933X_UART_MAX_STEP);
  	up->max_baud = min_t(unsigned int, baud, AR933X_UART_MAX_BAUD);
  
diff --git a/target/linux/bcm27xx/patches-4.19/950-0786-leds-pca963x-Fix-open-drain-initialization.patch b/target/linux/bcm27xx/patches-4.19/950-0786-leds-pca963x-Fix-open-drain-initialization.patch
deleted file mode 100644
index e63d4c6bc1..0000000000
--- a/target/linux/bcm27xx/patches-4.19/950-0786-leds-pca963x-Fix-open-drain-initialization.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From 1738aaf187e0c8e97fbdd9661960b835f45e8985 Mon Sep 17 00:00:00 2001
-From: Zahari Petkov <zahari@balena.io>
-Date: Mon, 18 Nov 2019 23:02:55 +0200
-Subject: [PATCH] leds: pca963x: Fix open-drain initialization
-
-commit 697529091ac7a0a90ca349b914bb30641c13c753 upstream.
-
-Before commit bb29b9cccd95 ("leds: pca963x: Add bindings to invert
-polarity") Mode register 2 was initialized directly with either 0x01
-or 0x05 for open-drain or totem pole (push-pull) configuration.
-
-Afterwards, MODE2 initialization started using bitwise operations on
-top of the default MODE2 register value (0x05). Using bitwise OR for
-setting OUTDRV with 0x01 and 0x05 does not produce correct results.
-When open-drain is used, instead of setting OUTDRV to 0, the driver
-keeps it as 1:
-
-Open-drain: 0x05 | 0x01 -> 0x05 (0b101 - incorrect)
-Totem pole: 0x05 | 0x05 -> 0x05 (0b101 - correct but still wrong)
-
-Now OUTDRV setting uses correct bitwise operations for initialization:
-
-Open-drain: 0x05 & ~0x04 -> 0x01 (0b001 - correct)
-Totem pole: 0x05 | 0x04 -> 0x05 (0b101 - correct)
-
-Additional MODE2 register definitions are introduced now as well.
-
-Fixes: bb29b9cccd95 ("leds: pca963x: Add bindings to invert polarity")
-Signed-off-by: Zahari Petkov <zahari@balena.io>
-Signed-off-by: Pavel Machek <pavel@ucw.cz>
----
- drivers/leds/leds-pca963x.c | 8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
---- a/drivers/leds/leds-pca963x.c
-+++ b/drivers/leds/leds-pca963x.c
-@@ -43,6 +43,8 @@
- #define PCA963X_LED_PWM		0x2	/* Controlled through PWM */
- #define PCA963X_LED_GRP_PWM	0x3	/* Controlled through PWM/GRPPWM */
- 
-+#define PCA963X_MODE2_OUTDRV	0x04	/* Open-drain or totem pole */
-+#define PCA963X_MODE2_INVRT	0x10	/* Normal or inverted direction */
- #define PCA963X_MODE2_DMBLNK	0x20	/* Enable blinking */
- 
- #define PCA963X_MODE1		0x00
-@@ -462,12 +464,12 @@ static int pca963x_probe(struct i2c_clie
- 						    PCA963X_MODE2);
- 		/* Configure output: open-drain or totem pole (push-pull) */
- 		if (pdata->outdrv == PCA963X_OPEN_DRAIN)
--			mode2 |= 0x01;
-+			mode2 &= ~PCA963X_MODE2_OUTDRV;
- 		else
--			mode2 |= 0x05;
-+			mode2 |= PCA963X_MODE2_OUTDRV;
- 		/* Configure direction: normal or inverted */
- 		if (pdata->dir == PCA963X_INVERTED)
--			mode2 |= 0x10;
-+			mode2 |= PCA963X_MODE2_INVRT;
- 		i2c_smbus_write_byte_data(pca963x->chip->client, PCA963X_MODE2,
- 					  mode2);
- 	}
diff --git a/target/linux/generic/hack-4.19/204-module_strip.patch b/target/linux/generic/hack-4.19/204-module_strip.patch
index 41bb021e71..c9f84dd637 100644
--- a/target/linux/generic/hack-4.19/204-module_strip.patch
+++ b/target/linux/generic/hack-4.19/204-module_strip.patch
@@ -114,7 +114,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  config MODULES_TREE_LOOKUP
 --- a/kernel/module.c
 +++ b/kernel/module.c
-@@ -3029,9 +3029,11 @@ static int setup_load_info(struct load_i
+@@ -3028,9 +3028,11 @@ static int setup_load_info(struct load_i
  
  static int check_modinfo(struct module *mod, struct load_info *info, int flags)
  {
@@ -127,7 +127,7 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	if (flags & MODULE_INIT_IGNORE_VERMAGIC)
  		modmagic = NULL;
  
-@@ -3052,6 +3054,7 @@ static int check_modinfo(struct module *
+@@ -3051,6 +3053,7 @@ static int check_modinfo(struct module *
  				mod->name);
  		add_taint_module(mod, TAINT_OOT_MODULE, LOCKDEP_STILL_OK);
  	}
diff --git a/target/linux/generic/pending-4.19/810-pci_disable_common_quirks.patch b/target/linux/generic/pending-4.19/810-pci_disable_common_quirks.patch
index c8c28b5175..738bbd71d1 100644
--- a/target/linux/generic/pending-4.19/810-pci_disable_common_quirks.patch
+++ b/target/linux/generic/pending-4.19/810-pci_disable_common_quirks.patch
@@ -33,7 +33,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  /*
   * The Mellanox Tavor device gives false positive parity errors.  Mark this
   * device with a broken_parity_status to allow PCI scanning code to "skip"
-@@ -3152,6 +3153,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
+@@ -3147,6 +3148,8 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata);
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata);
  
@@ -42,7 +42,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  /*
   * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum.
   * To work around this, query the size it should be configured to by the
-@@ -3177,6 +3180,8 @@ static void quirk_intel_ntb(struct pci_d
+@@ -3172,6 +3175,8 @@ static void quirk_intel_ntb(struct pci_d
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e08, quirk_intel_ntb);
  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x0e0d, quirk_intel_ntb);
  
@@ -51,7 +51,7 @@ Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
  /*
   * Some BIOS implementations leave the Intel GPU interrupts enabled, even
   * though no one is handling them (e.g., if the i915 driver is never
-@@ -3215,6 +3220,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
+@@ -3210,6 +3215,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN
  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq);
  DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq);
  
diff --git a/target/linux/kirkwood/patches-4.14/101-iconnect.patch b/target/linux/kirkwood/patches-4.14/101-iconnect.patch
index 9fd14a955b..935e2dfcf5 100644
--- a/target/linux/kirkwood/patches-4.14/101-iconnect.patch
+++ b/target/linux/kirkwood/patches-4.14/101-iconnect.patch
@@ -60,15 +60,15 @@
  	partition@100000 {
 -		label = "zImage";
 -		reg = <0x100000 0x300000>;
+-	};
+-
+-	partition@540000 {
+-		label = "initrd";
+-		reg = <0x540000 0x300000>;
 +		label = "second stage u-boot";
 +		reg = <0x100000 0x200000>;
  	};
  
--	partition@540000 {
--		label = "initrd";
--		reg = <0x540000 0x300000>;
--	};
--
 -	partition@980000 {
 -		label = "boot";
 -		reg = <0x980000 0x1f400000>;
diff --git a/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch
index f13d459223..60c07b8c76 100644
--- a/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch
+++ b/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch
@@ -66,16 +66,16 @@
 -		partition@500000 {
 -			label = "uImage2";
 -			reg = <0x00500000 0x300000>;
+-		};
+-
+-		partition@800000 {
+-			label = "failsafe";
+-			reg = <0x00800000 0x800000>;
 +		partition@1c0000 {
 +			label = "uboot_env";
 +			reg = <0x001c0000 0x40000>;
  		};
  
--		partition@800000 {
--			label = "failsafe";
--			reg = <0x00800000 0x800000>;
--		};
--
 -		partition@1000000 {
 -			label = "root";
 -			reg = <0x01000000 0x7000000>;
diff --git a/target/linux/kirkwood/patches-4.19/101-iconnect.patch b/target/linux/kirkwood/patches-4.19/101-iconnect.patch
index 9fd14a955b..935e2dfcf5 100644
--- a/target/linux/kirkwood/patches-4.19/101-iconnect.patch
+++ b/target/linux/kirkwood/patches-4.19/101-iconnect.patch
@@ -60,15 +60,15 @@
  	partition@100000 {
 -		label = "zImage";
 -		reg = <0x100000 0x300000>;
+-	};
+-
+-	partition@540000 {
+-		label = "initrd";
+-		reg = <0x540000 0x300000>;
 +		label = "second stage u-boot";
 +		reg = <0x100000 0x200000>;
  	};
  
--	partition@540000 {
--		label = "initrd";
--		reg = <0x540000 0x300000>;
--	};
--
 -	partition@980000 {
 -		label = "boot";
 -		reg = <0x980000 0x1f400000>;
diff --git a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
index 813650124c..4273eb9af1 100644
--- a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
+++ b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
@@ -66,16 +66,16 @@
 -		partition@500000 {
 -			label = "uImage2";
 -			reg = <0x00500000 0x300000>;
+-		};
+-
+-		partition@800000 {
+-			label = "failsafe";
+-			reg = <0x00800000 0x800000>;
 +		partition@1c0000 {
 +			label = "uboot_env";
 +			reg = <0x001c0000 0x40000>;
  		};
  
--		partition@800000 {
--			label = "failsafe";
--			reg = <0x00800000 0x800000>;
--		};
--
 -		partition@1000000 {
 -			label = "root";
 -			reg = <0x01000000 0x7000000>;