aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorFrederik Noe-Sdun <Frederik.Sdun@googlemail.com>2019-07-29 20:23:28 +0200
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-11-08 18:16:14 +0100
commit0cbd2c74d0c9f41d07757907226e5cfeaf16e06a (patch)
tree3368f58bd39707eef689c97559e97a4a5706252e /target
parent0ff2385a92c0a31769fce954b7bd571d6114dbc8 (diff)
downloadupstream-0cbd2c74d0c9f41d07757907226e5cfeaf16e06a.tar.gz
upstream-0cbd2c74d0c9f41d07757907226e5cfeaf16e06a.tar.bz2
upstream-0cbd2c74d0c9f41d07757907226e5cfeaf16e06a.zip
ramips: add support for Netgear EX6130
Specifications: * SoC: MT7620A * RAM: 64 MB DDR * Flash: 8MB NOR SPI flash * WiFi: MT7612E (5Ghz) and builtin MT7620A (2.4GHz) * LAN: 1x100M The -factory images can be flashed from the device's web interface or via nmrpflash. The device seems to use base PCB as EX3700/EX3800, but supporting AC1200 using MT7612E. MAC adresses: 5.0 GHz 0x8004 *:9a 2.4 GHz 0x4 *:9b lan 0x28 *:9b wan 0x2e *:9c Since this is a one-port device, although wan MAC address is set in flash, it is not used in OpenWrt setup. Signed-off-by: Frederik Noe-Sdun <Frederik.Sdun@googlemail.com> [rebased, extended commit message, tiny DTS style fixes] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target')
-rw-r--r--target/linux/ramips/dts/mt7620a_netgear_ex3700.dts114
-rw-r--r--target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi115
-rw-r--r--target/linux/ramips/dts/mt7620a_netgear_ex6130.dts57
-rw-r--r--target/linux/ramips/image/mt7620.mk13
-rwxr-xr-xtarget/linux/ramips/mt7620/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ramips/mt7620/base-files/etc/board.d/02_network1
6 files changed, 189 insertions, 114 deletions
diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts b/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts
index 311f27781d..f657e926cb 100644
--- a/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts
+++ b/target/linux/ramips/dts/mt7620a_netgear_ex3700.dts
@@ -2,10 +2,7 @@
/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "mt7620a.dtsi"
+#include "mt7620a_netgear_ex3700_ex6130.dtsi"
/ {
compatible = "netgear,ex3700", "ralink,mt7620a-soc";
@@ -18,10 +15,6 @@
led-upgrade = &led_power_green;
};
- chosen {
- bootargs = "console=ttyS0,57600";
- };
-
leds {
compatible = "gpio-leds";
@@ -61,109 +54,4 @@
gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
};
};
-
- keys {
- compatible = "gpio-keys";
-
- reset {
- label = "reset";
- gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_RESTART>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WPS_BUTTON>;
- };
- };
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&spi0 {
- status = "okay";
-
- m25p80@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
- read-only;
- };
-
- partition@30000 {
- label = "config";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x50000 0x790000>;
- };
-
- partition@7e0000 {
- label = "board_data";
- reg = <0x7e0000 0x10000>;
- read-only;
- };
-
- partition@7f0000 {
- label = "nvram";
- reg = <0x7f0000 0x10000>;
- read-only;
- };
- };
- };
-};
-
-&pcie {
- status = "okay";
-};
-
-&pcie0 {
- mt76@0,0 {
- reg = <0x0000 0 0 0 0 >;
- mediatek,mtd-eeprom = <&factory 0x8000>;
- ieee80211-freq-limit = <5000000 6000000>;
- };
-};
-
-&ethernet {
- mtd-mac-address = <&factory 0x28>;
-};
-
-&wmac {
- ralink,mtd-eeprom = <&factory 0x0>;
-};
-
-&pinctrl {
- state_default: pinctrl0 {
- default {
- ralink,group = "i2c", "rgmii2", "spi refclk";
- ralink,function = "gpio";
- };
- };
};
diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi b/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi
new file mode 100644
index 0000000000..a2d44e8941
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_netgear_ex3700_ex6130.dtsi
@@ -0,0 +1,115 @@
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "mt7620a.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio2 26 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio2 {
+ status = "okay";
+};
+
+&spi0 {
+ status = "okay";
+
+ m25p80@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0x790000>;
+ };
+
+ partition@7e0000 {
+ label = "board_data";
+ reg = <0x7e0000 0x10000>;
+ read-only;
+ };
+
+ partition@7f0000 {
+ label = "nvram";
+ reg = <0x7f0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ mt76@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x28>;
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&factory 0x0>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "rgmii2", "spi refclk";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/dts/mt7620a_netgear_ex6130.dts b/target/linux/ramips/dts/mt7620a_netgear_ex6130.dts
new file mode 100644
index 0000000000..68dd3f65d3
--- /dev/null
+++ b/target/linux/ramips/dts/mt7620a_netgear_ex6130.dts
@@ -0,0 +1,57 @@
+/* This file is released into the public domain */
+
+/dts-v1/;
+
+#include "mt7620a_netgear_ex3700_ex6130.dtsi"
+
+/ {
+ compatible = "netgear,ex6130", "ralink,mt7620a-soc";
+ model = "Netgear EX6130";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_green;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_green;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_green: power_g {
+ label = "ex6130:green:power";
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ power_a {
+ label = "ex6130:amber:power";
+ gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
+ };
+
+ router_g {
+ label = "ex6130:green:router";
+ gpios = <&gpio2 25 GPIO_ACTIVE_LOW>;
+ };
+
+ router_r {
+ label = "ex6130:red:router";
+ gpios = <&gpio2 24 GPIO_ACTIVE_LOW>;
+ };
+
+ device_g {
+ label = "ex6130:green:device";
+ gpios = <&gpio2 20 GPIO_ACTIVE_LOW>;
+ };
+
+ device_r {
+ label = "ex6130:red:device";
+ gpios = <&gpio2 21 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "ex6130:green:wps";
+ gpios = <&gpio2 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 88437a6904..d3de3074b2 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -612,6 +612,19 @@ define Device/netgear_ex3700
endef
TARGET_DEVICES += netgear_ex3700
+define Device/netgear_ex6130
+ MTK_SOC := mt7620a
+ NETGEAR_BOARD_ID := U12H319T50_NETGEAR
+ BLOCKSIZE := 4k
+ IMAGE_SIZE := 7744k
+ IMAGES += factory.chk
+ IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | netgear-chk
+ DEVICE_PACKAGES := kmod-mt76x2
+ DEVICE_VENDOR := NETGEAR
+ DEVICE_MODEL := EX6130
+endef
+TARGET_DEVICES += netgear_ex6130
+
define Device/netgear_wn3000rp-v3
MTK_SOC := mt7620a
IMAGE_SIZE := 7872k
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
index 6d6dcde6af..59f0fe8dab 100755
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/01_leds
@@ -155,7 +155,8 @@ netgear,ex2700|\
netgear,wn3000rp-v3)
set_wifi_led "$boardname:green:router"
;;
-netgear,ex3700)
+netgear,ex3700|\
+netgear,ex6130)
ucidef_set_led_netdev "wlan5g" "ROUTER (green)" "$boardname:green:router" "wlan0"
ucidef_set_led_netdev "wlan2g" "DEVICE (green)" "$boardname:green:device" "wlan1"
;;
diff --git a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
index 94600bb437..dfca48e123 100755
--- a/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/mt7620/base-files/etc/board.d/02_network
@@ -39,6 +39,7 @@ ramips_setup_interfaces()
kimax,u25awf-h1|\
netgear,ex2700|\
netgear,ex3700|\
+ netgear,ex6130|\
netgear,wn3000rp-v3|\
planex,cs-qr10|\
planex,mzk-ex300np|\