aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorNicholas Smith <nicholas.smith@telcoantennas.com.au>2020-07-04 09:09:08 +1000
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-08-10 12:49:29 +0200
commitc00b8dcf72b5df6137e2726cf40645abe188d57a (patch)
tree25557cd073308485a2f893b1687a9cbde301f530 /target
parent37df722266a205c7bbbf333a67aad70253769f91 (diff)
downloadupstream-c00b8dcf72b5df6137e2726cf40645abe188d57a.tar.gz
upstream-c00b8dcf72b5df6137e2726cf40645abe188d57a.tar.bz2
upstream-c00b8dcf72b5df6137e2726cf40645abe188d57a.zip
ath79: add support for Telco T1
Description: 2x 100Mbps Etherent ports 24V passive PoE 64MB RAM 16MB Flash 2.4GHz WiFi 1x WiFi antenna (RP-SMA connector) 1x LTE antenna (SMA connector) Sierra Wireless MC7430 LTE modem Flash instructions: Original firmware is based on OpenWrt. Flash using sysupgrade -n SUPPORTED_DEVICES is added to support factory firmware. Signed-off-by: Nicholas Smith <nicholas.smith@telcoantennas.com.au> [add missing led_rssi0 DT label, add SUPPORTED_DEVICES] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target')
-rw-r--r--target/linux/ath79/dts/qca9531_telco_t1.dts144
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches3
-rw-r--r--target/linux/ath79/image/generic.mk11
4 files changed, 159 insertions, 2 deletions
diff --git a/target/linux/ath79/dts/qca9531_telco_t1.dts b/target/linux/ath79/dts/qca9531_telco_t1.dts
new file mode 100644
index 0000000000..25a97edfca
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_telco_t1.dts
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+ compatible = "telco,t1", "qca,qca9531";
+ model = "Telco T1";
+
+ aliases {
+ label-mac-device = &eth0;
+ led-boot = &led_rssi0;
+ led-failsafe = &led_rssi0;
+ led-running = &led_rssi0;
+ led-upgrade = &led_rssi0;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins &pinmux_led_wan_pin>;
+
+ wan {
+ label = "t1:blue:wan";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ lan {
+ label = "t1:blue:lan";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "t1:blue:wlan";
+ gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ led_rssi0: rssi0 {
+ label = "t1:blue:rssi0";
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi1 {
+ label = "t1:blue:rssi1";
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ rssi2 {
+ label = "t1:blue:rssi2";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x010000>;
+ read-only;
+ };
+
+ art: partition@10000 {
+ label = "art";
+ reg = <0x010000 0x010000>;
+ read-only;
+ };
+
+ partition@20000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x020000 0xfd0000>;
+ };
+
+ partition@ff0000 {
+ label = "art-backup";
+ reg = <0xff0000 0x010000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+
+ phy-handle = <&swphy4>;
+};
+
+&eth1 {
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
+
+&pinmux {
+ pinmux_led_wan_pin: led_wan_pin {
+ pinctrl-single,bits = <0x4 0x0 0xff>;
+ };
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index 1dff5acc38..4f1b76a65a 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -106,7 +106,8 @@ comfast,cf-e560ac)
ucidef_set_led_switch "lan3" "LAN3" "$boardname:blue:lan3" "switch0" "0x08"
ucidef_set_led_switch "lan4" "LAN4" "$boardname:blue:lan4" "switch0" "0x10"
;;
-comfast,cf-ew72)
+comfast,cf-ew72|\
+telco,t1)
ucidef_set_led_switch "lan" "LAN" "$boardname:blue:lan" "switch0" "0x02"
ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
;;
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
index cc1b8ff412..cf30bb405a 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
@@ -25,7 +25,8 @@ adtran,bsap1840)
ucidef_add_gpio_switch "wifi0_ext_c" "2.4GHz External Antenna C" "509" "1"
ucidef_add_gpio_switch "wifi0_int_c" "2.4GHz Internal Antenna C" "510"
;;
-comfast,cf-e5)
+comfast,cf-e5|\
+telco,t1)
ucidef_add_gpio_switch "lte_power" "LTE Power" "14" "1"
ucidef_add_gpio_switch "lte_wakeup" "LTE Wakeup" "11" "1"
ucidef_add_gpio_switch "lte_poweroff" "LTE Poweroff" "1" "1"
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 6b7bfb4639..ee798bf321 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1367,6 +1367,17 @@ define Device/sitecom_wlr-8100
endef
TARGET_DEVICES += sitecom_wlr-8100
+define Device/telco_t1
+ SOC := qca9531
+ DEVICE_VENDOR := Telco
+ DEVICE_MODEL := T1
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-net-qmi-wwan \
+ kmod-usb-serial-option uqmi -swconfig -uboot-envtools
+ IMAGE_SIZE := 16192k
+ SUPPORTED_DEVICES += telco_electronics,tel-t1
+endef
+TARGET_DEVICES += telco_t1
+
define Device/teltonika_rut955
SOC := ar9344
DEVICE_VENDOR := Teltonika