aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorDawsen Gao <dawsen_gao@163.com>2022-02-12 10:21:21 +0800
committerSungbo Eo <mans0n@gorani.run>2022-03-13 12:37:25 +0900
commitb3da44b6471dbfb3b71201a80f8844a3bc71ee35 (patch)
tree20d5b2be37bd5f9baccece0a6edf4dab13b7b991 /target
parent9851d4b6ce6e89d164a04803817625a9041b060a (diff)
downloadupstream-b3da44b6471dbfb3b71201a80f8844a3bc71ee35.tar.gz
upstream-b3da44b6471dbfb3b71201a80f8844a3bc71ee35.tar.bz2
upstream-b3da44b6471dbfb3b71201a80f8844a3bc71ee35.zip
ramips: Add support for Dual-Q H721
Dual-Q H721 is a router platform board, it is the smaller model of the U7621-06. The device has the following specifications: MT7621AT (880 MHz) 256 of RAM (DDR3) 16 MB of FLASH (MX25l12805d SPI) 5x 1 Gbps Ethernet (MT7621 built-in switch) 1x M.2 (NGFF) 3.7V 3A max for 5G M.2 Modem work at USB3.0 mode 1x Minipcie 3.7V 3A max for LTE Modem work at USB2.0 Mode 2x Minipcie for WIFI card 4x Lan+1x Wan 10/100M/1000M RJ45 port 14x LEDs (1x GPIO-controlled) 1x reset button 1x UART header (4-pins) 1x mico SD-card reader 1x DC jack for main power (5~27 V) The following has been tested and is working: Ethernet switch miniPCIe slots (tested with Wi-Fi cards and LTE modem cards) miniSIM slot (works with normal size simcard) sysupgrade reset button micro SD-card reader Installation: This board has no locked down bootloader. The seller can be asked to install openwrt, so upgrades are standard sysupgrade method. Recovery: This board contains a Chinese, closed-source bootloader called Breed (Boot and Recovery Environment for Embedded Devices). Breed supports web recovery and to enter it, you keep the reset button pressed for around 5 seconds during boot. Your machine will be assigned an IP through DHCP and the router will use IP address 192.168.1.1. The recovery website is in Chinese, but is easy to use. Click on the second item in the list to access the recovery page, then the second item on the next page is where you select the firmware. In order to start the recovery, you click the button at the bottom. Signed-off-by: Dawsen Gao <dawsen_gao@163.com> [change author name (used SoB one), add ethernet pinctrl, apply sorting to device recipe] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target')
-rw-r--r--target/linux/ramips/dts/mt7621_dual-q_h721.dts198
-rw-r--r--target/linux/ramips/image/mt7621.mk10
2 files changed, 208 insertions, 0 deletions
diff --git a/target/linux/ramips/dts/mt7621_dual-q_h721.dts b/target/linux/ramips/dts/mt7621_dual-q_h721.dts
new file mode 100644
index 0000000000..2a18b3982d
--- /dev/null
+++ b/target/linux/ramips/dts/mt7621_dual-q_h721.dts
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "dual-q,h721", "mediatek,mt7621-soc";
+ model = "Dual-Q H721";
+
+ aliases {
+ led-boot = &led_status;
+ led-failsafe = &led_status;
+ led-running = &led_status;
+ led-upgrade = &led_status;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ gpio-export {
+ compatible = "gpio-export";
+ #size-cells = <0>;
+
+ usb-30-power {
+ gpio-export,name = "usb-30-power";
+ gpio-export,output = <0>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };
+
+ usb-20-power {
+ gpio-export,name = "usb-20-power";
+ gpio-export,output = <0>;
+ gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ usb1 {
+ label = "green:usb1";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ sig1 {
+ label = "green:sig1";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ };
+
+ usb2 {
+ label = "green:usb2";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ sig2 {
+ label = "green:sig2";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ tf {
+ label = "green:tf";
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi1 {
+ label = "green:wifi1";
+ gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ };
+
+ wifi2 {
+ label = "green:wifi2";
+ gpios = <&gpio 25 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status: status {
+ label = "green:status";
+ gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <40000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_e000: macaddr@e000 {
+ reg = <0xe000 0x6>;
+ };
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+};
+
+&sdhci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&switch0 {
+ ports {
+ port@0 {
+ status = "okay";
+ label = "lan1";
+ };
+
+ port@1 {
+ status = "okay";
+ label = "lan2";
+ };
+
+ port@2 {
+ status = "okay";
+ label = "lan3";
+ };
+
+ port@3 {
+ status = "okay";
+ label = "lan4";
+ };
+
+ port@4 {
+ status = "okay";
+ label = "wan";
+
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+ mac-address-increment = <1>;
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>;
+};
+
+&gmac0 {
+ nvmem-cells = <&macaddr_factory_e000>;
+ nvmem-cell-names = "mac-address";
+};
+
+&state_default {
+ gpio {
+ groups = "jtag", "wdt", "rgmii2";
+ function = "gpio";
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 44b04dbefb..69d83e57e7 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -395,6 +395,16 @@ define Device/dlink_dir-882-r1
endef
TARGET_DEVICES += dlink_dir-882-r1
+define Device/dual-q_h721
+ $(Device/dsa-migration)
+ $(Device/uimage-lzma-loader)
+ IMAGE_SIZE := 16064k
+ DEVICE_VENDOR := Dual-Q
+ DEVICE_MODEL := H721
+ DEVICE_PACKAGES := kmod-ata-ahci kmod-sdhci-mt7620 kmod-usb3 -wpad-basic-wolfssl
+endef
+TARGET_DEVICES += dual-q_h721
+
define Device/d-team_newifi-d2
$(Device/dsa-migration)
$(Device/uimage-lzma-loader)