aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorImre Kaloz <kaloz@openwrt.org>2007-07-12 14:11:31 +0000
committerImre Kaloz <kaloz@openwrt.org>2007-07-12 14:11:31 +0000
commita92ca5e6b88f244554e72c60aa1d2372a7e1eeff (patch)
treed363e9b8383bc82fec042f92558f251db71d4d75 /target
parentf506ac7d818878107ecea1611ca773295823de2b (diff)
downloadupstream-a92ca5e6b88f244554e72c60aa1d2372a7e1eeff.tar.gz
upstream-a92ca5e6b88f244554e72c60aa1d2372a7e1eeff.tar.bz2
upstream-a92ca5e6b88f244554e72c60aa1d2372a7e1eeff.zip
upgrade AVR32 to 2.6.22.1
SVN-Revision: 7945
Diffstat (limited to 'target')
-rw-r--r--target/linux/avr32-2.6/Makefile2
-rw-r--r--target/linux/avr32-2.6/config/default17
-rw-r--r--target/linux/avr32-2.6/patches/100-git_sync.patch13796
3 files changed, 6965 insertions, 6850 deletions
diff --git a/target/linux/avr32-2.6/Makefile b/target/linux/avr32-2.6/Makefile
index 465d96c93d..f58b9e8386 100644
--- a/target/linux/avr32-2.6/Makefile
+++ b/target/linux/avr32-2.6/Makefile
@@ -11,7 +11,7 @@ BOARD:=avr32
BOARDNAME:=Atmel AVR32
FEATURES:=squashfs
-LINUX_VERSION:=2.6.21.5
+LINUX_VERSION:=2.6.22.1
define Target/Description
Build firmware images for ATNGW100 board
diff --git a/target/linux/avr32-2.6/config/default b/target/linux/avr32-2.6/config/default
index 5bd7078c94..1c0f9645af 100644
--- a/target/linux/avr32-2.6/config/default
+++ b/target/linux/avr32-2.6/config/default
@@ -6,11 +6,25 @@ CONFIG_AP7000_16_BIT_SMC=y
CONFIG_AVR32=y
CONFIG_BOARD_ATNGW100=y
# CONFIG_BOARD_ATSTK1000 is not set
+# CONFIG_BROADCOM_PHY is not set
# CONFIG_BT is not set
CONFIG_CPU_AT32AP7000=y
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+# CONFIG_CPU_FREQ_STAT is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_AT32AP=y
CONFIG_DW_DMAC=y
CONFIG_ENTRY_ADDRESS=0x90000000
+# CONFIG_FIXED_PHY is not set
# CONFIG_GEN_RTC is not set
+# CONFIG_GPIO_DEV is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ=250
CONFIG_HZ_250=y
@@ -18,6 +32,7 @@ CONFIG_HZ_250=y
# CONFIG_I2C is not set
# CONFIG_IDE is not set
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_LEDS_GPIO=y
CONFIG_MACB=y
# CONFIG_MTD_ABSENT is not set
CONFIG_MTD_BLKDEVS=y
@@ -72,11 +87,13 @@ CONFIG_MTD=y
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_PHYS_OFFSET=0x10000000
CONFIG_PLATFORM_AT32AP=y
+# CONFIG_QSEMI_PHY is not set
# CONFIG_RTC is not set
# CONFIG_SERIAL_8250 is not set
CONFIG_SERIAL_ATMEL_CONSOLE=y
# CONFIG_SERIAL_ATMEL_TTYAT is not set
CONFIG_SERIAL_ATMEL=y
+# CONFIG_SMSC_PHY is not set
# CONFIG_SPI_AT25 is not set
CONFIG_SPI_ATMEL=y
# CONFIG_SPI_BITBANG is not set
diff --git a/target/linux/avr32-2.6/patches/100-git_sync.patch b/target/linux/avr32-2.6/patches/100-git_sync.patch
index 5c5cc8e7fb..7653c5ff0c 100644
--- a/target/linux/avr32-2.6/patches/100-git_sync.patch
+++ b/target/linux/avr32-2.6/patches/100-git_sync.patch
@@ -1,414 +1,360 @@
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/boards/atngw100/flash.c avr32-git/arch/avr32/boards/atngw100/flash.c
---- linux-2.6.21.3/arch/avr32/boards/atngw100/flash.c 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/arch/avr32/boards/atngw100/flash.c 2007-06-06 11:33:46.000000000 +0200
-@@ -0,0 +1,95 @@
-+/*
-+ * ATNGW100 board-specific flash initialization
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <asm/arch/smc.h>
-+
-+static struct smc_config flash_config __initdata = {
-+ .ncs_read_setup = 0,
-+ .nrd_setup = 40,
-+ .ncs_write_setup = 0,
-+ .nwe_setup = 10,
-+
-+ .ncs_read_pulse = 80,
-+ .nrd_pulse = 40,
-+ .ncs_write_pulse = 65,
-+ .nwe_pulse = 55,
-+
-+ .read_cycle = 120,
-+ .write_cycle = 120,
-+
-+ .bus_width = 2,
-+ .nrd_controlled = 1,
-+ .nwe_controlled = 1,
-+ .byte_write = 1,
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c linux-avr32.git/arch/avr32/boards/atngw100/setup.c
+--- linux-2.6.22.1/arch/avr32/boards/atngw100/setup.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/boards/atngw100/setup.c 2007-07-12 13:59:49.000000000 +0200
+@@ -13,6 +13,7 @@
+ #include <linux/linkage.h>
+ #include <linux/platform_device.h>
+ #include <linux/types.h>
++#include <linux/leds.h>
+ #include <linux/spi/spi.h>
+
+ #include <asm/io.h>
+@@ -21,6 +22,7 @@
+ #include <asm/arch/at32ap7000.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/init.h>
++#include <asm/arch/portmux.h>
+
+ /* Initialized by bootloader-specific startup code. */
+ struct tag *bootloader_tags __initdata;
+@@ -39,6 +41,11 @@
+ },
+ };
+
++static struct mci_platform_data __initdata mci0_data = {
++ .detect_pin = GPIO_PIN_PC(25),
++ .wp_pin = GPIO_PIN_PE(0),
+};
+
-+static struct mtd_partition flash_parts[] = {
-+ {
-+ .name = "u-boot",
-+ .offset = 0x00000000,
-+ .size = 0x00020000, /* 128 KiB */
-+ .mask_flags = MTD_WRITEABLE,
-+ },
-+ {
-+ .name = "root",
-+ .offset = 0x00020000,
-+ .size = 0x007d0000,
-+ },
-+ {
-+ .name = "env",
-+ .offset = 0x007f0000,
-+ .size = 0x00010000,
-+ .mask_flags = MTD_WRITEABLE,
+ /*
+ * The next two functions should go away as the boot loader is
+ * supposed to initialize the macb address registers with a valid
+@@ -100,8 +107,31 @@
+ at32_setup_serial_console(0);
+ }
+
++static const struct gpio_led ngw_leds[] = {
++ { .name = "sys", .gpio = GPIO_PIN_PA(16), .active_low = 1,
++ .default_trigger = "heartbeat",
+ },
++ { .name = "a", .gpio = GPIO_PIN_PA(19), .active_low = 1, },
++ { .name = "b", .gpio = GPIO_PIN_PE(19), .active_low = 1, },
+};
+
-+static struct physmap_flash_data flash_data = {
-+ .width = 2,
-+ .nr_parts = ARRAY_SIZE(flash_parts),
-+ .parts = flash_parts,
++static const struct gpio_led_platform_data ngw_led_data = {
++ .num_leds = ARRAY_SIZE(ngw_leds),
++ .leds = (void *) ngw_leds,
+};
+
-+static struct resource flash_resource = {
-+ .start = 0x00000000,
-+ .end = 0x007fffff,
-+ .flags = IORESOURCE_MEM,
++static struct platform_device ngw_gpio_leds = {
++ .name = "leds-gpio",
++ .id = -1,
++ .dev = {
++ .platform_data = (void *) &ngw_led_data,
++ }
+};
+
-+static struct platform_device flash_device = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .resource = &flash_resource,
-+ .num_resources = 1,
-+ .dev = {
-+ .platform_data = &flash_data,
-+ },
-+};
+ static int __init atngw100_init(void)
+ {
++ unsigned i;
+
-+/* This needs to be called after the SMC has been initialized */
-+static int __init atngw100_flash_init(void)
-+{
-+ int ret;
+ /*
+ * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
+ * reserve any pins for it.
+@@ -115,6 +145,14 @@
+ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
+
+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++ at32_add_device_mci(0, &mci0_data);
++ at32_add_device_usba(0, NULL);
+
-+ ret = smc_set_configuration(0, &flash_config);
-+ if (ret < 0) {
-+ printk(KERN_ERR "atngw100: failed to set NOR flash timing\n");
-+ return ret;
++ for (i = 0; i < ARRAY_SIZE(ngw_leds); i++) {
++ at32_select_gpio(ngw_leds[i].gpio,
++ AT32_GPIOF_OUTPUT | AT32_GPIOF_HIGH);
+ }
++ platform_device_register(&ngw_gpio_leds);
+
+ return 0;
+ }
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atstk1000/atstk1002.c linux-avr32.git/arch/avr32/boards/atstk1000/atstk1002.c
+--- linux-2.6.22.1/arch/avr32/boards/atstk1000/atstk1002.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/boards/atstk1000/atstk1002.c 2007-07-12 13:59:49.000000000 +0200
+@@ -11,6 +11,7 @@
+ #include <linux/etherdevice.h>
+ #include <linux/init.h>
+ #include <linux/kernel.h>
++#include <linux/leds.h>
+ #include <linux/platform_device.h>
+ #include <linux/string.h>
+ #include <linux/types.h>
+@@ -27,7 +28,6 @@
+
+ #include "atstk1000.h"
+
+-#define SW2_DEFAULT /* MMCI and UART_A available */
+
+ struct eth_addr {
+ u8 addr[6];
+@@ -36,6 +36,7 @@
+ static struct eth_addr __initdata hw_addr[2];
+ static struct eth_platform_data __initdata eth_data[2];
+
++#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
+ static struct spi_board_info spi0_board_info[] __initdata = {
+ {
+ /* QVGA display */
+@@ -45,6 +46,18 @@
+ .mode = SPI_MODE_3,
+ },
+ };
++#endif
+
-+ platform_device_register(&flash_device);
-+
-+ return 0;
-+}
-+device_initcall(atngw100_flash_init);
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/boards/atngw100/Makefile avr32-git/arch/avr32/boards/atngw100/Makefile
---- linux-2.6.21.3/arch/avr32/boards/atngw100/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/arch/avr32/boards/atngw100/Makefile 2007-06-06 11:33:46.000000000 +0200
-@@ -0,0 +1 @@
-+obj-y += setup.o flash.o
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/boards/atngw100/setup.c avr32-git/arch/avr32/boards/atngw100/setup.c
---- linux-2.6.21.3/arch/avr32/boards/atngw100/setup.c 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/arch/avr32/boards/atngw100/setup.c 2007-06-06 11:33:46.000000000 +0200
-@@ -0,0 +1,131 @@
-+/*
-+ * Board-specific setup code for the ATNGW100 Network Gateway
-+ *
-+ * Copyright (C) 2005-2006 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#include <linux/clk.h>
-+#include <linux/etherdevice.h>
-+#include <linux/init.h>
-+#include <linux/linkage.h>
-+#include <linux/platform_device.h>
-+#include <linux/types.h>
-+#include <linux/spi/spi.h>
-+
-+#include <asm/io.h>
-+#include <asm/setup.h>
-+
-+#include <asm/arch/at32ap7000.h>
-+#include <asm/arch/board.h>
-+#include <asm/arch/init.h>
++#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++static struct spi_board_info spi1_board_info[] __initdata = { {
++ /* patch in custom entries here */
++} };
++#endif
+
-+/* Initialized by bootloader-specific startup code. */
-+struct tag *bootloader_tags __initdata;
++static struct mci_platform_data __initdata mci0_data = {
++ .detect_pin = GPIO_PIN_NONE,
++ .wp_pin = GPIO_PIN_NONE,
++};
+
+ /*
+ * The next two functions should go away as the boot loader is
+@@ -101,12 +114,71 @@
+ clk_put(pclk);
+ }
+
+-void __init setup_board(void)
++#ifdef CONFIG_BOARD_ATSTK1002_J2_LED
++
++static struct gpio_led stk_j2_led[] = {
++#ifdef CONFIG_BOARD_ATSTK1002_J2_LED8
++#define LEDSTRING "J2 jumpered to LED8"
++ { .name = "led0:amber", .gpio = GPIO_PIN_PB( 8), },
++ { .name = "led1:amber", .gpio = GPIO_PIN_PB( 9), },
++ { .name = "led2:amber", .gpio = GPIO_PIN_PB(10), },
++ { .name = "led3:amber", .gpio = GPIO_PIN_PB(13), },
++ { .name = "led4:amber", .gpio = GPIO_PIN_PB(14), },
++ { .name = "led5:amber", .gpio = GPIO_PIN_PB(15), },
++ { .name = "led6:amber", .gpio = GPIO_PIN_PB(16), },
++ { .name = "led7:amber", .gpio = GPIO_PIN_PB(30),
++ .default_trigger = "heartbeat", },
++#else /* RGB */
++#define LEDSTRING "J2 jumpered to RGB LEDs"
++ { .name = "r1:red", .gpio = GPIO_PIN_PB( 8), },
++ { .name = "g1:green", .gpio = GPIO_PIN_PB(10), },
++ { .name = "b1:blue", .gpio = GPIO_PIN_PB(14), },
++
++ { .name = "r2:red", .gpio = GPIO_PIN_PB( 9),
++ .default_trigger = "heartbeat", },
++ { .name = "g2:green", .gpio = GPIO_PIN_PB(13), },
++ { .name = "b2:blue", .gpio = GPIO_PIN_PB(15),
++ .default_trigger = "heartbeat", },
++ /* PB16, PB30 unused */
++#endif
++};
+
-+struct eth_addr {
-+ u8 addr[6];
++static struct gpio_led_platform_data stk_j2_led_data = {
++ .num_leds = ARRAY_SIZE(stk_j2_led),
++ .leds = stk_j2_led,
+};
-+static struct eth_addr __initdata hw_addr[2];
-+static struct eth_platform_data __initdata eth_data[2];
+
-+static struct spi_board_info spi0_board_info[] __initdata = {
-+ {
-+ .modalias = "mtd_dataflash",
-+ .max_speed_hz = 10000000,
-+ .chip_select = 0,
++static struct platform_device stk_j2_led_dev = {
++ .name = "leds-gpio",
++ .id = 2, /* gpio block J2 */
++ .dev = {
++ .platform_data = &stk_j2_led_data,
+ },
+};
+
-+static struct mci_platform_data __initdata mci0_data = {
-+ .detect_pin = GPIO_PIN_PC(25),
-+ .wp_pin = GPIO_PIN_PE(0),
-+};
++static void setup_j2_leds(void)
+ {
+-#ifdef SW2_DEFAULT
+- at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
++ unsigned i;
+
-+/*
-+ * The next two functions should go away as the boot loader is
-+ * supposed to initialize the macb address registers with a valid
-+ * ethernet address. But we need to keep it around for a while until
-+ * we can be reasonably sure the boot loader does this.
-+ *
-+ * The phy_id is ignored as the driver will probe for it.
-+ */
-+static int __init parse_tag_ethernet(struct tag *tag)
-+{
-+ int i;
++ for (i = 0; i < ARRAY_SIZE(stk_j2_led); i++)
++ at32_select_gpio(stk_j2_led[i].gpio, AT32_GPIOF_OUTPUT);
+
-+ i = tag->u.ethernet.mac_index;
-+ if (i < ARRAY_SIZE(hw_addr))
-+ memcpy(hw_addr[i].addr, tag->u.ethernet.hw_address,
-+ sizeof(hw_addr[i].addr));
++ printk("STK1002: " LEDSTRING "\n");
++ platform_device_register(&stk_j2_led_dev);
++}
+
-+ return 0;
+ #else
++static void setup_j2_leds(void)
++{
+}
-+__tagtable(ATAG_ETHERNET, parse_tag_ethernet);
++#endif
+
-+static void __init set_hw_addr(struct platform_device *pdev)
++void __init setup_board(void)
+{
-+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ const u8 *addr;
-+ void __iomem *regs;
-+ struct clk *pclk;
++#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+ at32_map_usart(0, 1); /* USART 0/B: /dev/ttyS1, IRDA */
++#else
++ at32_map_usart(1, 0); /* USART 1/A: /dev/ttyS0, DB9 */
+ #endif
+ /* USART 2/unused: expansion connector */
+ at32_map_usart(3, 2); /* USART 3/C: /dev/ttyS2, DB9 */
+@@ -140,18 +212,40 @@
+
+ at32_add_system_devices();
+
+-#ifdef SW2_DEFAULT
+- at32_add_device_usart(0);
+-#else
++#ifdef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
+ at32_add_device_usart(1);
++#else
++ at32_add_device_usart(0);
+ #endif
+ at32_add_device_usart(2);
+
++#ifndef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
+ set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
+-
+- at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
++ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
++#else
+ at32_add_device_lcdc(0, &atstk1000_lcdc_data,
+ fbmem_start, fbmem_size);
++#endif
+
-+ if (!res)
-+ return;
-+ if (pdev->id >= ARRAY_SIZE(hw_addr))
-+ return;
++#ifndef CONFIG_BOARD_ATSTK1002_SW1_CUSTOM
++ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
++#endif
++#ifdef CONFIG_BOARD_ATSTK1002_SPI1
++ at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
++#endif
++ at32_add_device_twi(0);
++#ifndef CONFIG_BOARD_ATSTK1002_SW2_CUSTOM
++ at32_add_device_mci(0, &mci0_data);
++#endif
++ at32_add_device_usba(0, NULL);
++ at32_add_device_abdac(0);
++#ifndef CONFIG_BOARD_ATSTK1002_SW3_CUSTOM
++ at32_add_device_ssc(0, ATMEL_SSC_TX);
++#endif
+
-+ addr = hw_addr[pdev->id].addr;
-+ if (!is_valid_ether_addr(addr))
-+ return;
++ setup_j2_leds();
+
+ return 0;
+ }
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig linux-avr32.git/arch/avr32/boards/atstk1000/Kconfig
+--- linux-2.6.22.1/arch/avr32/boards/atstk1000/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/arch/avr32/boards/atstk1000/Kconfig 2007-07-12 13:59:49.000000000 +0200
+@@ -0,0 +1,79 @@
++# STK1000 customization
+
-+ /*
-+ * Since this is board-specific code, we'll cheat and use the
-+ * physical address directly as we happen to know that it's
-+ * the same as the virtual address.
-+ */
-+ regs = (void __iomem __force *)res->start;
-+ pclk = clk_get(&pdev->dev, "pclk");
-+ if (!pclk)
-+ return;
++if BOARD_ATSTK1002
+
-+ clk_enable(pclk);
-+ __raw_writel((addr[3] << 24) | (addr[2] << 16)
-+ | (addr[1] << 8) | addr[0], regs + 0x98);
-+ __raw_writel((addr[5] << 8) | addr[4], regs + 0x9c);
-+ clk_disable(pclk);
-+ clk_put(pclk);
-+}
++config BOARD_ATSTK1002_CUSTOM
++ bool "Non-default STK-1002 jumper settings"
++ help
++ You will normally leave the jumpers on the CPU card at their
++ default settings. If you need to use certain peripherals,
++ you will need to change some of those jumpers.
+
-+struct platform_device *at32_usart_map[1];
-+unsigned int at32_nr_usarts = 1;
++if BOARD_ATSTK1002_CUSTOM
+
-+void __init setup_board(void)
-+{
-+ at32_map_usart(1, 0); /* USART 1: /dev/ttyS0, DB9 */
-+ at32_setup_serial_console(0);
-+}
++config BOARD_ATSTK1002_SW1_CUSTOM
++ bool "SW1: use SSC1 (not SPI0)"
++ help
++ This also prevents using the external DAC as an audio interface,
++ and means you can't initialize the on-board QVGA display.
+
-+static int __init atngw100_init(void)
-+{
-+ /*
-+ * ATNGW100 uses 16-bit SDRAM interface, so we don't need to
-+ * reserve any pins for it.
-+ */
++config BOARD_ATSTK1002_SW2_CUSTOM
++ bool "SW2: use IRDA or TIMER0 (not UART-A, MMC/SD, and PS2-A)"
++ help
++ If you change this you'll want an updated boot loader putting
++ the console on UART-C not UART-A.
+
-+ at32_add_system_devices();
++config BOARD_ATSTK1002_SW3_CUSTOM
++ bool "SW3: use TIMER1 (not SSC0 and GCLK)"
++ help
++ This also prevents using the external DAC as an audio interface.
+
-+ at32_add_device_usart(0);
++config BOARD_ATSTK1002_SW4_CUSTOM
++ bool "SW4: use ISI/Camera (not GPIOs, SPI1, and PS2-B)"
++ help
++ To use the camera interface you'll need a custom card (on the
++ PCI-format connector) connect a video sensor.
+
-+ set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-+ set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
++config BOARD_ATSTK1002_SW5_CUSTOM
++ bool "SW5: use MACB1 (not LCDC)"
+
-+ at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-+ at32_add_device_mci(0, &mci0_data);
-+ at32_add_device_usba(0);
++config BOARD_ATSTK1002_SW6_CUSTOM
++ bool "SW6: more GPIOs (not MACB0)"
+
-+ return 0;
-+}
-+postcore_initcall(atngw100_init);
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/boards/atstk1000/atstk1000.h avr32-git/arch/avr32/boards/atstk1000/atstk1000.h
---- linux-2.6.21.3/arch/avr32/boards/atstk1000/atstk1000.h 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/arch/avr32/boards/atstk1000/atstk1000.h 2007-06-06 11:33:46.000000000 +0200
-@@ -0,0 +1,15 @@
-+/*
-+ * ATSTK1000 setup code: Daughterboard interface
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
-+#define __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H
++endif # custom
+
-+extern struct atmel_lcdfb_info atstk1000_lcdc_data;
++config BOARD_ATSTK1002_SPI1
++ bool "Configure SPI1 controller"
++ depends on !BOARD_ATSTK1002_SW4_CUSTOM
++ help
++ All the signals for the second SPI controller are available on
++ GPIO lines and accessed through the J1 jumper block. Say "y"
++ here to configure that SPI controller.
+
-+#endif /* __ARCH_AVR32_BOARDS_ATSTK1000_ATSTK1000_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/boards/atstk1000/atstk1002.c avr32-git/arch/avr32/boards/atstk1000/atstk1002.c
---- linux-2.6.21.3/arch/avr32/boards/atstk1000/atstk1002.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/boards/atstk1000/atstk1002.c 2007-06-06 11:33:46.000000000 +0200
-@@ -16,6 +16,8 @@
- #include <linux/types.h>
- #include <linux/spi/spi.h>
-
-+#include <video/atmel_lcdc.h>
++config BOARD_ATSTK1002_J2_LED
++ bool
++ default BOARD_ATSTK1002_J2_LED8 || BOARD_ATSTK1002_J2_RGB
+
- #include <asm/io.h>
- #include <asm/setup.h>
- #include <asm/arch/at32ap7000.h>
-@@ -23,6 +25,7 @@
- #include <asm/arch/init.h>
- #include <asm/arch/portmux.h>
-
-+#include "atstk1000.h"
-
- #define SW2_DEFAULT /* MMCI and UART_A available */
-
-@@ -31,9 +34,7 @@
- };
-
- static struct eth_addr __initdata hw_addr[2];
--
- static struct eth_platform_data __initdata eth_data[2];
--extern struct lcdc_platform_data atstk1000_fb0_data;
-
- static struct spi_board_info spi0_board_info[] __initdata = {
- {
-@@ -41,9 +42,15 @@
- .modalias = "ltv350qv",
- .max_speed_hz = 16000000,
- .chip_select = 1,
-+ .mode = SPI_MODE_3,
- },
- };
-
-+static struct mci_platform_data __initdata mci0_data = {
-+ .detect_pin = GPIO_PIN_NONE,
-+ .wp_pin = GPIO_PIN_NONE,
-+};
++choice
++ prompt "LEDs connected to J2:"
++ depends on LEDS_GPIO && !BOARD_ATSTK1002_SW4_CUSTOM
++ optional
++ help
++ Select this if you have jumpered the J2 jumper block to the
++ LED0..LED7 amber leds, or to the RGB leds, using a ten-pin
++ IDC cable. A default "heartbeat" trigger is provided, but
++ you can of course override this.
+
- /*
- * The next two functions should go away as the boot loader is
- * supposed to initialize the macb address registers with a valid
-@@ -148,7 +155,12 @@
- set_hw_addr(at32_add_device_eth(0, &eth_data[0]));
-
- at32_add_device_spi(0, spi0_board_info, ARRAY_SIZE(spi0_board_info));
-- at32_add_device_lcdc(0, &atstk1000_fb0_data);
-+ at32_add_device_twi(0);
-+ at32_add_device_mci(0, &mci0_data);
-+ at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-+ fbmem_start, fbmem_size);
-+ at32_add_device_usba(0);
-+ at32_add_device_abdac(0);
-
- return 0;
- }
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/boards/atstk1000/setup.c avr32-git/arch/avr32/boards/atstk1000/setup.c
---- linux-2.6.21.3/arch/avr32/boards/atstk1000/setup.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/boards/atstk1000/setup.c 2007-06-06 11:33:46.000000000 +0200
-@@ -8,43 +8,56 @@
- * published by the Free Software Foundation.
- */
- #include <linux/bootmem.h>
-+#include <linux/fb.h>
- #include <linux/init.h>
- #include <linux/types.h>
- #include <linux/linkage.h>
-
--#include <asm/setup.h>
-+#include <video/atmel_lcdc.h>
-
-+#include <asm/setup.h>
- #include <asm/arch/board.h>
-
-+#include "atstk1000.h"
++config BOARD_ATSTK1002_J2_LED8
++ bool "LED0..LED7"
++ help
++ Select this if J2 is jumpered to LED0..LED7 amber leds.
+
- /* Initialized by bootloader-specific startup code. */
- struct tag *bootloader_tags __initdata;
-
--struct lcdc_platform_data __initdata atstk1000_fb0_data;
--
--void __init board_setup_fbmem(unsigned long fbmem_start,
-- unsigned long fbmem_size)
--{
-- if (!fbmem_size)
-- return;
--
-- if (!fbmem_start) {
-- void *fbmem;
--
-- fbmem = alloc_bootmem_low_pages(fbmem_size);
-- fbmem_start = __pa(fbmem);
-- } else {
-- pg_data_t *pgdat;
--
-- for_each_online_pgdat(pgdat) {
-- if (fbmem_start >= pgdat->bdata->node_boot_start
-- && fbmem_start <= pgdat->bdata->node_low_pfn)
-- reserve_bootmem_node(pgdat, fbmem_start,
-- fbmem_size);
-- }
-- }
--
-- printk("%luKiB framebuffer memory at address 0x%08lx\n",
-- fbmem_size >> 10, fbmem_start);
-- atstk1000_fb0_data.fbmem_start = fbmem_start;
-- atstk1000_fb0_data.fbmem_size = fbmem_size;
--}
-+static struct fb_videomode __initdata ltv350qv_modes[] = {
-+ {
-+ .name = "320x240 @ 75",
-+ .refresh = 75,
-+ .xres = 320, .yres = 240,
-+ .pixclock = KHZ2PICOS(6891),
++config BOARD_ATSTK1002_J2_RGB
++ bool "RGB leds"
++ help
++ Select this if J2 is jumpered to the RGB leds.
+
-+ .left_margin = 17, .right_margin = 33,
-+ .upper_margin = 10, .lower_margin = 10,
-+ .hsync_len = 16, .vsync_len = 1,
++endchoice
+
-+ .sync = 0,
-+ .vmode = FB_VMODE_NONINTERLACED,
-+ },
-+};
++endif # stk 1002
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig linux-avr32.git/arch/avr32/configs/atngw100_defconfig
+--- linux-2.6.22.1/arch/avr32/configs/atngw100_defconfig 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/configs/atngw100_defconfig 2007-07-12 13:59:49.000000000 +0200
+@@ -712,7 +712,21 @@
+ #
+ # LED devices
+ #
+-# CONFIG_NEW_LEDS is not set
++CONFIG_NEW_LEDS=y
++CONFIG_LEDS_CLASS=y
+
-+static struct fb_monspecs __initdata atstk1000_default_monspecs = {
-+ .manufacturer = "SNG",
-+ .monitor = "LTV350QV",
-+ .modedb = ltv350qv_modes,
-+ .modedb_len = ARRAY_SIZE(ltv350qv_modes),
-+ .hfmin = 14820,
-+ .hfmax = 22230,
-+ .vfmin = 60,
-+ .vfmax = 90,
-+ .dclkmax = 30000000,
-+};
++#
++# LED drivers
++#
++CONFIG_LEDS_GPIO=y
+
-+struct atmel_lcdfb_info __initdata atstk1000_lcdc_data = {
-+ .default_bpp = 24,
-+ .default_dmacon = ATMEL_LCDC_DMAEN | ATMEL_LCDC_DMA2DEN,
-+ .default_lcdcon2 = (ATMEL_LCDC_DISTYPE_TFT
-+ | ATMEL_LCDC_INVCLK
-+ | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE
-+ | ATMEL_LCDC_MEMOR_BIG),
-+ .default_monspecs = &atstk1000_default_monspecs,
-+ .guard_time = 2,
-+};
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/drivers/dw-dmac.c avr32-git/arch/avr32/drivers/dw-dmac.c
---- linux-2.6.21.3/arch/avr32/drivers/dw-dmac.c 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/arch/avr32/drivers/dw-dmac.c 2007-06-06 11:33:46.000000000 +0200
++#
++# LED Triggers
++#
++CONFIG_LEDS_TRIGGERS=y
++CONFIG_LEDS_TRIGGER_TIMER=y
++CONFIG_LEDS_TRIGGER_HEARTBEAT=y
++
+
+ #
+ # LED drivers
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c linux-avr32.git/arch/avr32/drivers/dw-dmac.c
+--- linux-2.6.22.1/arch/avr32/drivers/dw-dmac.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/arch/avr32/drivers/dw-dmac.c 2007-06-06 11:33:46.000000000 +0200
@@ -0,0 +1,761 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller
@@ -1122,7 +1068,7 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/drivers/dw-dmac.c avr3
+ goto out_free_pool;
+
+ ret = request_irq(platform_get_irq(pdev, 0), dmac_interrupt,
-+ SA_SAMPLE_RANDOM, pdev->name, dmac);
++ IRQF_SAMPLE_RANDOM, pdev->name, dmac);
+ if (ret)
+ goto out_unmap_regs;
+
@@ -1171,9 +1117,9 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/drivers/dw-dmac.c avr3
+MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_LICENSE("GPL");
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/drivers/dw-dmac.h avr32-git/arch/avr32/drivers/dw-dmac.h
---- linux-2.6.21.3/arch/avr32/drivers/dw-dmac.h 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/arch/avr32/drivers/dw-dmac.h 2007-06-06 11:33:46.000000000 +0200
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/drivers/dw-dmac.h linux-avr32.git/arch/avr32/drivers/dw-dmac.h
+--- linux-2.6.22.1/arch/avr32/drivers/dw-dmac.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/arch/avr32/drivers/dw-dmac.h 2007-06-06 11:33:46.000000000 +0200
@@ -0,0 +1,42 @@
+/*
+ * Driver for the Synopsys DesignWare DMA Controller
@@ -1217,56 +1163,26 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/drivers/dw-dmac.h avr3
+#define DW_DMAC_CHAN_DSR 0x050
+
+#endif /* __AVR32_DW_DMAC_H__ */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/drivers/Makefile avr32-git/arch/avr32/drivers/Makefile
---- linux-2.6.21.3/arch/avr32/drivers/Makefile 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/arch/avr32/drivers/Makefile 2007-06-06 11:33:46.000000000 +0200
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/drivers/Makefile linux-avr32.git/arch/avr32/drivers/Makefile
+--- linux-2.6.22.1/arch/avr32/drivers/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/arch/avr32/drivers/Makefile 2007-06-06 11:33:46.000000000 +0200
@@ -0,0 +1 @@
+obj-$(CONFIG_DW_DMAC) += dw-dmac.o
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/Kconfig avr32-git/arch/avr32/Kconfig
---- linux-2.6.21.3/arch/avr32/Kconfig 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/Kconfig 2007-06-06 11:33:46.000000000 +0200
-@@ -57,9 +57,6 @@
- bool
- default n
-
--config GENERIC_BUST_SPINLOCK
-- bool
--
- config GENERIC_HWEIGHT
- bool
- default y
-@@ -68,6 +65,11 @@
- bool
- default y
-
-+config GENERIC_BUG
-+ bool
-+ default y
-+ depends on BUG
-+
- source "init/Kconfig"
-
- menu "System Type and features"
-@@ -106,6 +108,9 @@
- config BOARD_ATSTK1000
- bool "ATSTK1000 evaluation board"
- select BOARD_ATSTK1002 if CPU_AT32AP7000
-+
-+config BOARD_ATNGW100
-+ bool "ATNGW100 Network Gateway"
- endchoice
-
- choice
-@@ -116,6 +121,8 @@
- bool "U-Boot (or similar) bootloader"
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/Kconfig linux-avr32.git/arch/avr32/Kconfig
+--- linux-2.6.22.1/arch/avr32/Kconfig 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/Kconfig 2007-07-12 13:59:49.000000000 +0200
+@@ -113,6 +113,10 @@
+ bool "ATNGW100 Network Gateway"
endchoice
-+source "arch/avr32/mach-at32ap/Kconfig"
++if BOARD_ATSTK1000
++source "arch/avr32/boards/atstk1000/Kconfig"
++endif
+
- config LOAD_ADDRESS
- hex
- default 0x10000000 if LOADER_U_BOOT=y && CPU_AT32AP7000=y
-@@ -164,6 +171,10 @@
+ choice
+ prompt "Boot loader type"
+ default LOADER_U_BOOT
+@@ -171,6 +175,10 @@
enabling Nexus-compliant debuggers to keep track of the PID of the
currently executing task.
@@ -1277,107 +1193,37 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/Kconfig avr32-git/arch
# FPU emulation goes here
source "kernel/Kconfig.hz"
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/cpu.c avr32-git/arch/avr32/kernel/cpu.c
---- linux-2.6.21.3/arch/avr32/kernel/cpu.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/kernel/cpu.c 2007-06-06 11:33:46.000000000 +0200
-@@ -209,16 +209,17 @@
- void __init setup_processor(void)
- {
- unsigned long config0, config1;
-+ unsigned long features;
- unsigned cpu_id, cpu_rev, arch_id, arch_rev, mmu_type;
- unsigned tmp;
-
-- config0 = sysreg_read(CONFIG0); /* 0x0000013e; */
-- config1 = sysreg_read(CONFIG1); /* 0x01f689a2; */
-- cpu_id = config0 >> 24;
-- cpu_rev = (config0 >> 16) & 0xff;
-- arch_id = (config0 >> 13) & 0x07;
-- arch_rev = (config0 >> 10) & 0x07;
-- mmu_type = (config0 >> 7) & 0x03;
-+ config0 = sysreg_read(CONFIG0);
-+ config1 = sysreg_read(CONFIG1);
-+ cpu_id = SYSREG_BFEXT(PROCESSORID, config0);
-+ cpu_rev = SYSREG_BFEXT(PROCESSORREVISION, config0);
-+ arch_id = SYSREG_BFEXT(AT, config0);
-+ arch_rev = SYSREG_BFEXT(AR, config0);
-+ mmu_type = SYSREG_BFEXT(MMUT, config0);
-
- boot_cpu_data.arch_type = arch_id;
- boot_cpu_data.cpu_type = cpu_id;
-@@ -226,16 +227,16 @@
- boot_cpu_data.cpu_revision = cpu_rev;
- boot_cpu_data.tlb_config = mmu_type;
-
-- tmp = (config1 >> 13) & 0x07;
-+ tmp = SYSREG_BFEXT(ILSZ, config1);
- if (tmp) {
-- boot_cpu_data.icache.ways = 1 << ((config1 >> 10) & 0x07);
-- boot_cpu_data.icache.sets = 1 << ((config1 >> 16) & 0x0f);
-+ boot_cpu_data.icache.ways = 1 << SYSREG_BFEXT(IASS, config1);
-+ boot_cpu_data.icache.sets = 1 << SYSREG_BFEXT(ISET, config1);
- boot_cpu_data.icache.linesz = 1 << (tmp + 1);
- }
-- tmp = (config1 >> 3) & 0x07;
-+ tmp = SYSREG_BFEXT(DLSZ, config1);
- if (tmp) {
-- boot_cpu_data.dcache.ways = 1 << (config1 & 0x07);
-- boot_cpu_data.dcache.sets = 1 << ((config1 >> 6) & 0x0f);
-+ boot_cpu_data.dcache.ways = 1 << SYSREG_BFEXT(DASS, config1);
-+ boot_cpu_data.dcache.sets = 1 << SYSREG_BFEXT(DSET, config1);
- boot_cpu_data.dcache.linesz = 1 << (tmp + 1);
- }
+@@ -185,6 +193,27 @@
-@@ -250,16 +251,39 @@
- cpu_names[cpu_id], cpu_id, cpu_rev,
- arch_names[arch_id], arch_rev);
- printk ("CPU: MMU configuration: %s\n", mmu_types[mmu_type]);
-+
- printk ("CPU: features:");
-- if (config0 & (1 << 6))
-- printk(" fpu");
-- if (config0 & (1 << 5))
-- printk(" java");
-- if (config0 & (1 << 4))
-- printk(" perfctr");
-- if (config0 & (1 << 3))
-+ features = 0;
-+ if (config0 & SYSREG_BIT(CONFIG0_R)) {
-+ features |= AVR32_FEATURE_RMW;
-+ printk(" rmw");
-+ }
-+ if (config0 & SYSREG_BIT(CONFIG0_D)) {
-+ features |= AVR32_FEATURE_DSP;
-+ printk(" dsp");
-+ }
-+ if (config0 & SYSREG_BIT(CONFIG0_S)) {
-+ features |= AVR32_FEATURE_SIMD;
-+ printk(" simd");
-+ }
-+ if (config0 & SYSREG_BIT(CONFIG0_O)) {
-+ features |= AVR32_FEATURE_OCD;
- printk(" ocd");
-+ }
-+ if (config0 & SYSREG_BIT(CONFIG0_P)) {
-+ features |= AVR32_FEATURE_PCTR;
-+ printk(" perfctr");
-+ }
-+ if (config0 & SYSREG_BIT(CONFIG0_J)) {
-+ features |= AVR32_FEATURE_JAVA;
-+ printk(" java");
-+ }
-+ if (config0 & SYSREG_BIT(CONFIG0_F)) {
-+ features |= AVR32_FEATURE_FPU;
-+ printk(" fpu");
-+ }
- printk("\n");
-+ boot_cpu_data.features = features;
- }
+ endmenu
- #ifdef CONFIG_PROC_FS
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/dma-controller.c avr32-git/arch/avr32/kernel/dma-controller.c
---- linux-2.6.21.3/arch/avr32/kernel/dma-controller.c 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/arch/avr32/kernel/dma-controller.c 2007-06-06 11:33:46.000000000 +0200
++menu "Power managment options"
++
++menu "CPU Frequency scaling"
++
++source "drivers/cpufreq/Kconfig"
++
++config CPU_FREQ_AT32AP
++ bool "CPU frequency driver for AT32AP"
++ depends on CPU_FREQ && PLATFORM_AT32AP
++ default n
++ help
++ This enables the CPU frequency driver for AT32AP processors.
++
++ For details, take a look in <file:Documentation/cpu-freq>.
++
++ If in doubt, say N.
++
++endmenu
++
++endmenu
++
+ menu "Bus options"
+
+ config PCI
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/kernel/dma-controller.c linux-avr32.git/arch/avr32/kernel/dma-controller.c
+--- linux-2.6.22.1/arch/avr32/kernel/dma-controller.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/arch/avr32/kernel/dma-controller.c 2007-06-06 11:33:46.000000000 +0200
@@ -0,0 +1,34 @@
+/*
+ * Preliminary DMA controller framework for AVR32
@@ -1413,252 +1259,9 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/dma-controller.
+ return NULL;
+}
+EXPORT_SYMBOL(find_dma_controller);
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/entry-avr32b.S avr32-git/arch/avr32/kernel/entry-avr32b.S
---- linux-2.6.21.3/arch/avr32/kernel/entry-avr32b.S 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/kernel/entry-avr32b.S 2007-06-06 11:33:46.000000000 +0200
-@@ -100,55 +100,49 @@
-
- .global tlb_miss_common
- tlb_miss_common:
-- mfsr r0, SYSREG_PTBR
-- mfsr r1, SYSREG_TLBEAR
-+ mfsr r0, SYSREG_TLBEAR
-+ mfsr r1, SYSREG_PTBR
-
- /* Is it the vmalloc space? */
-- bld r1, 31
-+ bld r0, 31
- brcs handle_vmalloc_miss
-
- /* First level lookup */
- pgtbl_lookup:
-- lsr r2, r1, PGDIR_SHIFT
-- ld.w r0, r0[r2 << 2]
-- bld r0, _PAGE_BIT_PRESENT
-+ lsr r2, r0, PGDIR_SHIFT
-+ ld.w r3, r1[r2 << 2]
-+ bfextu r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT
-+ bld r3, _PAGE_BIT_PRESENT
- brcc page_table_not_present
-
-- /* TODO: Check access rights on page table if necessary */
--
- /* Translate to virtual address in P1. */
-- andl r0, 0xf000
-- sbr r0, 31
-+ andl r3, 0xf000
-+ sbr r3, 31
-
- /* Second level lookup */
-- lsl r1, (32 - PGDIR_SHIFT)
-- lsr r1, (32 - PGDIR_SHIFT) + PAGE_SHIFT
-- add r2, r0, r1 << 2
-- ld.w r1, r2[0]
-- bld r1, _PAGE_BIT_PRESENT
-+ ld.w r2, r3[r1 << 2]
-+ mfsr r0, SYSREG_TLBARLO
-+ bld r2, _PAGE_BIT_PRESENT
- brcc page_not_present
-
- /* Mark the page as accessed */
-- sbr r1, _PAGE_BIT_ACCESSED
-- st.w r2[0], r1
-+ sbr r2, _PAGE_BIT_ACCESSED
-+ st.w r3[r1 << 2], r2
-
- /* Drop software flags */
-- andl r1, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
-- mtsr SYSREG_TLBELO, r1
-+ andl r2, _PAGE_FLAGS_HARDWARE_MASK & 0xffff
-+ mtsr SYSREG_TLBELO, r2
-
- /* Figure out which entry we want to replace */
-- mfsr r0, SYSREG_TLBARLO
-+ mfsr r1, SYSREG_MMUCR
- clz r2, r0
- brcc 1f
-- mov r1, -1 /* All entries have been accessed, */
-- mtsr SYSREG_TLBARLO, r1 /* so reset TLBAR */
-- mov r2, 0 /* and start at 0 */
--1: mfsr r1, SYSREG_MMUCR
-- lsl r2, 14
-- andl r1, 0x3fff, COH
-- or r1, r2
-- mtsr SYSREG_MMUCR, r1
-+ mov r3, -1 /* All entries have been accessed, */
-+ mov r2, 0 /* so start at 0 */
-+ mtsr SYSREG_TLBARLO, r3 /* and reset TLBAR */
-
-+1: bfins r1, r2, SYSREG_DRP_OFFSET, SYSREG_DRP_SIZE
-+ mtsr SYSREG_MMUCR, r1
- tlbw
-
- tlbmiss_restore
-@@ -156,8 +150,8 @@
-
- handle_vmalloc_miss:
- /* Simply do the lookup in init's page table */
-- mov r0, lo(swapper_pg_dir)
-- orh r0, hi(swapper_pg_dir)
-+ mov r1, lo(swapper_pg_dir)
-+ orh r1, hi(swapper_pg_dir)
- rjmp pgtbl_lookup
-
-
-@@ -340,12 +334,34 @@
- do_nmi_ll:
- sub sp, 4
- stmts --sp, r0-lr
-- /* FIXME: Make sure RAR_NMI and RSR_NMI are pushed instead of *_EX */
-- rcall save_full_context_ex
-+ mfsr r9, SYSREG_RSR_NMI
-+ mfsr r8, SYSREG_RAR_NMI
-+ bfextu r0, r9, MODE_SHIFT, 3
-+ brne 2f
-+
-+1: pushm r8, r9 /* PC and SR */
- mfsr r12, SYSREG_ECR
- mov r11, sp
- rcall do_nmi
-- rjmp bad_return
-+ popm r8-r9
-+ mtsr SYSREG_RAR_NMI, r8
-+ tst r0, r0
-+ mtsr SYSREG_RSR_NMI, r9
-+ brne 3f
-+
-+ ldmts sp++, r0-lr
-+ sub sp, -4 /* skip r12_orig */
-+ rete
-+
-+2: sub r10, sp, -(FRAME_SIZE_FULL - REG_LR)
-+ stdsp sp[4], r10 /* replace saved SP */
-+ rjmp 1b
-+
-+3: popm lr
-+ sub sp, -4 /* skip sp */
-+ popm r0-r12
-+ sub sp, -4 /* skip r12_orig */
-+ rete
-
- handle_address_fault:
- sub sp, 4
-@@ -630,9 +646,12 @@
- rcall do_IRQ
-
- lddsp r4, sp[REG_SR]
-- andh r4, (MODE_MASK >> 16), COH
-+ bfextu r4, r4, SYSREG_M0_OFFSET, 3
-+ cp.w r4, MODE_SUPERVISOR >> SYSREG_M0_OFFSET
-+ breq 2f
-+ cp.w r4, MODE_USER >> SYSREG_M0_OFFSET
- #ifdef CONFIG_PREEMPT
-- brne 2f
-+ brne 3f
- #else
- brne 1f
- #endif
-@@ -649,9 +668,18 @@
- sub sp, -4 /* ignore r12_orig */
- rete
-
-+2: get_thread_info r0
-+ ld.w r1, r0[TI_flags]
-+ bld r1, TIF_CPU_GOING_TO_SLEEP
- #ifdef CONFIG_PREEMPT
--2:
-- get_thread_info r0
-+ brcc 3f
-+#else
-+ brcc 1b
-+#endif
-+ sub r1, pc, . - cpu_idle_skip_sleep
-+ stdsp sp[REG_PC], r1
-+#ifdef CONFIG_PREEMPT
-+3: get_thread_info r0
- ld.w r2, r0[TI_preempt_count]
- cp.w r2, 0
- brne 1b
-@@ -662,12 +690,32 @@
- bld r4, SYSREG_GM_OFFSET
- brcs 1b
- rcall preempt_schedule_irq
-- rjmp 1b
- #endif
-+ rjmp 1b
- .endm
-
- .section .irq.text,"ax",@progbits
-
-+.global cpu_idle_sleep
-+cpu_idle_sleep:
-+ mask_interrupts
-+ get_thread_info r8
-+ ld.w r9, r8[TI_flags]
-+ bld r9, TIF_NEED_RESCHED
-+ brcs cpu_idle_enable_int_and_exit
-+ sbr r9, TIF_CPU_GOING_TO_SLEEP
-+ st.w r8[TI_flags], r9
-+ unmask_interrupts
-+ sleep 0
-+cpu_idle_skip_sleep:
-+ mask_interrupts
-+ ld.w r9, r8[TI_flags]
-+ cbr r9, TIF_CPU_GOING_TO_SLEEP
-+ st.w r8[TI_flags], r9
-+cpu_idle_enable_int_and_exit:
-+ unmask_interrupts
-+ retal r12
-+
- .global irq_level0
- .global irq_level1
- .global irq_level2
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/irq.c avr32-git/arch/avr32/kernel/irq.c
---- linux-2.6.21.3/arch/avr32/kernel/irq.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/kernel/irq.c 2007-06-06 11:33:46.000000000 +0200
-@@ -7,15 +7,6 @@
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-- *
-- * This file contains the code used by various IRQ handling routines:
-- * asking for different IRQ's should be done through these routines
-- * instead of just grabbing them. Thus setups with different IRQ numbers
-- * shouldn't result in any weird surprises, and installing new handlers
-- * should be easier.
-- *
-- * IRQ's are in fact implemented a bit like signal handlers for the kernel.
-- * Naturally it's not a 1:1 relation, but there are similarities.
- */
-
- #include <linux/interrupt.h>
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/kprobes.c avr32-git/arch/avr32/kernel/kprobes.c
---- linux-2.6.21.3/arch/avr32/kernel/kprobes.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/kernel/kprobes.c 2007-06-06 11:33:46.000000000 +0200
-@@ -179,7 +179,7 @@
- return 1;
- }
-
--static int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
-+int __kprobes kprobe_fault_handler(struct pt_regs *regs, int trapnr)
- {
- struct kprobe *cur = kprobe_running();
-
-@@ -216,11 +216,6 @@
- if (post_kprobe_handler(args->regs))
- ret = NOTIFY_STOP;
- break;
-- case DIE_FAULT:
-- if (kprobe_running()
-- && kprobe_fault_handler(args->regs, args->trapnr))
-- ret = NOTIFY_STOP;
-- break;
- default:
- break;
- }
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/Makefile avr32-git/arch/avr32/kernel/Makefile
---- linux-2.6.21.3/arch/avr32/kernel/Makefile 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/kernel/Makefile 2007-06-06 11:33:46.000000000 +0200
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/kernel/Makefile linux-avr32.git/arch/avr32/kernel/Makefile
+--- linux-2.6.22.1/arch/avr32/kernel/Makefile 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/kernel/Makefile 2007-06-06 11:33:46.000000000 +0200
@@ -9,6 +9,7 @@
obj-y += setup.o traps.o semaphore.o ptrace.o
obj-y += signal.o sys_avr32.o process.o time.o
@@ -1667,1773 +1270,430 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/Makefile avr32-
obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
obj-$(CONFIG_KPROBES) += kprobes.o
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/module.c avr32-git/arch/avr32/kernel/module.c
---- linux-2.6.21.3/arch/avr32/kernel/module.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/kernel/module.c 2007-06-06 11:33:46.000000000 +0200
-@@ -12,10 +12,11 @@
- * published by the Free Software Foundation.
- */
-
--#include <linux/moduleloader.h>
--#include <linux/module.h>
--#include <linux/kernel.h>
-+#include <linux/bug.h>
- #include <linux/elf.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleloader.h>
- #include <linux/vmalloc.h>
-
- void *module_alloc(unsigned long size)
-@@ -315,10 +316,10 @@
- vfree(module->arch.syminfo);
- module->arch.syminfo = NULL;
-
-- return 0;
-+ return module_bug_finalize(hdr, sechdrs, module);
- }
-
- void module_arch_cleanup(struct module *module)
- {
--
-+ module_bug_cleanup(module);
- }
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/process.c avr32-git/arch/avr32/kernel/process.c
---- linux-2.6.21.3/arch/avr32/kernel/process.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/kernel/process.c 2007-06-06 11:33:46.000000000 +0200
-@@ -11,6 +11,7 @@
- #include <linux/fs.h>
- #include <linux/ptrace.h>
- #include <linux/reboot.h>
-+#include <linux/uaccess.h>
- #include <linux/unistd.h>
-
- #include <asm/sysreg.h>
-@@ -19,6 +20,8 @@
- void (*pm_power_off)(void) = NULL;
- EXPORT_SYMBOL(pm_power_off);
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap7000.c linux-avr32.git/arch/avr32/mach-at32ap/at32ap7000.c
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap7000.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/mach-at32ap/at32ap7000.c 2007-07-12 13:59:49.000000000 +0200
+@@ -17,14 +17,20 @@
+ #include <asm/arch/at32ap7000.h>
+ #include <asm/arch/board.h>
+ #include <asm/arch/portmux.h>
+-#include <asm/arch/sm.h>
-+extern void cpu_idle_sleep(void);
-+
- /*
- * This file handles the architecture-dependent parts of process handling..
- */
-@@ -27,9 +30,8 @@
- {
- /* endless idle loop with no priority at all */
- while (1) {
-- /* TODO: Enter sleep mode */
- while (!need_resched())
-- cpu_relax();
-+ cpu_idle_sleep();
- preempt_enable_no_resched();
- schedule();
- preempt_disable();
-@@ -114,39 +116,178 @@
- /* do nothing */
- }
+ #include <video/atmel_lcdc.h>
-+static void dump_mem(const char *str, const char *log_lvl,
-+ unsigned long bottom, unsigned long top)
-+{
-+ unsigned long p;
-+ int i;
-+
-+ printk("%s%s(0x%08lx to 0x%08lx)\n", log_lvl, str, bottom, top);
-+
-+ for (p = bottom & ~31; p < top; ) {
-+ printk("%s%04lx: ", log_lvl, p & 0xffff);
-+
-+ for (i = 0; i < 8; i++, p += 4) {
-+ unsigned int val;
-+
-+ if (p < bottom || p >= top)
-+ printk(" ");
-+ else {
-+ if (__get_user(val, (unsigned int __user *)p)) {
-+ printk("\n");
-+ goto out;
-+ }
-+ printk("%08x ", val);
-+ }
-+ }
-+ printk("\n");
-+ }
-+
-+out:
-+ return;
-+}
-+
-+static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
-+{
-+ return (p > (unsigned long)tinfo)
-+ && (p < (unsigned long)tinfo + THREAD_SIZE - 3);
-+}
-+
-+#ifdef CONFIG_FRAME_POINTER
-+static void show_trace_log_lvl(struct task_struct *tsk, unsigned long *sp,
-+ struct pt_regs *regs, const char *log_lvl)
-+{
-+ unsigned long lr, fp;
-+ struct thread_info *tinfo;
-+
-+ if (regs)
-+ fp = regs->r7;
-+ else if (tsk == current)
-+ asm("mov %0, r7" : "=r"(fp));
-+ else
-+ fp = tsk->thread.cpu_context.r7;
-+
-+ /*
-+ * Walk the stack as long as the frame pointer (a) is within
-+ * the kernel stack of the task, and (b) it doesn't move
-+ * downwards.
-+ */
-+ tinfo = task_thread_info(tsk);
-+ printk("%sCall trace:\n", log_lvl);
-+ while (valid_stack_ptr(tinfo, fp)) {
-+ unsigned long new_fp;
-+
-+ lr = *(unsigned long *)fp;
-+#ifdef CONFIG_KALLSYMS
-+ printk("%s [<%08lx>] ", log_lvl, lr);
-+#else
-+ printk(" [<%08lx>] ", lr);
-+#endif
-+ print_symbol("%s\n", lr);
-+
-+ new_fp = *(unsigned long *)(fp + 4);
-+ if (new_fp <= fp)
-+ break;
-+ fp = new_fp;
-+ }
-+ printk("\n");
-+}
-+#else
-+static void show_trace_log_lvl(struct task_struct *tsk, unsigned long *sp,
-+ struct pt_regs *regs, const char *log_lvl)
-+{
-+ unsigned long addr;
-+
-+ printk("%sCall trace:\n", log_lvl);
-+
-+ while (!kstack_end(sp)) {
-+ addr = *sp++;
-+ if (kernel_text_address(addr)) {
-+#ifdef CONFIG_KALLSYMS
-+ printk("%s [<%08lx>] ", log_lvl, addr);
-+#else
-+ printk(" [<%08lx>] ", addr);
-+#endif
-+ print_symbol("%s\n", addr);
-+ }
-+ }
-+ printk("\n");
-+}
-+#endif
-+
-+void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
-+ struct pt_regs *regs, const char *log_lvl)
-+{
-+ struct thread_info *tinfo;
-+
-+ if (sp == 0) {
-+ if (tsk)
-+ sp = tsk->thread.cpu_context.ksp;
-+ else
-+ sp = (unsigned long)&tinfo;
-+ }
-+ if (!tsk)
-+ tsk = current;
-+
-+ tinfo = task_thread_info(tsk);
-+
-+ if (valid_stack_ptr(tinfo, sp)) {
-+ dump_mem("Stack: ", log_lvl, sp,
-+ THREAD_SIZE + (unsigned long)tinfo);
-+ show_trace_log_lvl(tsk, (unsigned long *)sp, regs, log_lvl);
-+ }
-+}
-+
-+void show_stack(struct task_struct *tsk, unsigned long *stack)
-+{
-+ show_stack_log_lvl(tsk, (unsigned long)stack, NULL, "");
-+}
-+
-+void dump_stack(void)
-+{
-+ unsigned long stack;
-+
-+ show_trace_log_lvl(current, &stack, NULL, "");
-+}
-+EXPORT_SYMBOL(dump_stack);
+ #include "clock.h"
+ #include "hmatrix.h"
+ #include "pio.h"
+-#include "sm.h"
++#include "pm.h"
+
- static const char *cpu_modes[] = {
- "Application", "Supervisor", "Interrupt level 0", "Interrupt level 1",
- "Interrupt level 2", "Interrupt level 3", "Exception", "NMI"
- };
++/*
++ * We can reduce the code size a bit by using a constant here. Since
++ * this file is completely chip-specific, it's safe to not use
++ * ioremap. Generic drivers should of course never do this.
++ */
++#define AT32_PM_BASE 0xfff00000
--void show_regs(struct pt_regs *regs)
-+void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl)
- {
- unsigned long sp = regs->sp;
- unsigned long lr = regs->lr;
- unsigned long mode = (regs->sr & MODE_MASK) >> MODE_SHIFT;
-
-- if (!user_mode(regs))
-+ if (!user_mode(regs)) {
- sp = (unsigned long)regs + FRAME_SIZE_FULL;
-
-- print_symbol("PC is at %s\n", instruction_pointer(regs));
-- print_symbol("LR is at %s\n", lr);
-- printk("pc : [<%08lx>] lr : [<%08lx>] %s\n"
-- "sp : %08lx r12: %08lx r11: %08lx\n",
-- instruction_pointer(regs),
-- lr, print_tainted(), sp, regs->r12, regs->r11);
-- printk("r10: %08lx r9 : %08lx r8 : %08lx\n",
-- regs->r10, regs->r9, regs->r8);
-- printk("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
-- regs->r7, regs->r6, regs->r5, regs->r4);
-- printk("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
-- regs->r3, regs->r2, regs->r1, regs->r0);
-- printk("Flags: %c%c%c%c%c\n",
-+ printk("%s", log_lvl);
-+ print_symbol("PC is at %s\n", instruction_pointer(regs));
-+ printk("%s", log_lvl);
-+ print_symbol("LR is at %s\n", lr);
-+ }
-+
-+ printk("%spc : [<%08lx>] lr : [<%08lx>] %s\n"
-+ "%ssp : %08lx r12: %08lx r11: %08lx\n",
-+ log_lvl, instruction_pointer(regs), lr, print_tainted(),
-+ log_lvl, sp, regs->r12, regs->r11);
-+ printk("%sr10: %08lx r9 : %08lx r8 : %08lx\n",
-+ log_lvl, regs->r10, regs->r9, regs->r8);
-+ printk("%sr7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
-+ log_lvl, regs->r7, regs->r6, regs->r5, regs->r4);
-+ printk("%sr3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
-+ log_lvl, regs->r3, regs->r2, regs->r1, regs->r0);
-+ printk("%sFlags: %c%c%c%c%c\n", log_lvl,
- regs->sr & SR_Q ? 'Q' : 'q',
- regs->sr & SR_V ? 'V' : 'v',
- regs->sr & SR_N ? 'N' : 'n',
- regs->sr & SR_Z ? 'Z' : 'z',
- regs->sr & SR_C ? 'C' : 'c');
-- printk("Mode bits: %c%c%c%c%c%c%c%c%c\n",
-+ printk("%sMode bits: %c%c%c%c%c%c%c%c%c\n", log_lvl,
- regs->sr & SR_H ? 'H' : 'h',
- regs->sr & SR_R ? 'R' : 'r',
- regs->sr & SR_J ? 'J' : 'j',
-@@ -156,9 +297,21 @@
- regs->sr & SR_I1M ? '1' : '.',
- regs->sr & SR_I0M ? '0' : '.',
- regs->sr & SR_GM ? 'G' : 'g');
-- printk("CPU Mode: %s\n", cpu_modes[mode]);
-+ printk("%sCPU Mode: %s\n", log_lvl, cpu_modes[mode]);
-+ printk("%sProcess: %s [%d] (task: %p thread: %p)\n",
-+ log_lvl, current->comm, current->pid, current,
-+ task_thread_info(current));
-+}
-+
-+void show_regs(struct pt_regs *regs)
-+{
-+ unsigned long sp = regs->sp;
-+
-+ if (!user_mode(regs))
-+ sp = (unsigned long)regs + FRAME_SIZE_FULL;
-
-- show_trace(NULL, (unsigned long *)sp, regs);
-+ show_regs_log_lvl(regs, "");
-+ show_trace_log_lvl(current, (unsigned long *)sp, regs, "");
+ #define PBMEM(base) \
+ { \
+@@ -88,6 +94,8 @@
+ .index = _index, \
}
- EXPORT_SYMBOL(show_regs);
-
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/setup.c avr32-git/arch/avr32/kernel/setup.c
---- linux-2.6.21.3/arch/avr32/kernel/setup.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/kernel/setup.c 2007-06-06 11:33:46.000000000 +0200
-@@ -8,12 +8,14 @@
-
- #include <linux/clk.h>
- #include <linux/init.h>
-+#include <linux/initrd.h>
- #include <linux/sched.h>
- #include <linux/console.h>
- #include <linux/ioport.h>
- #include <linux/bootmem.h>
- #include <linux/fs.h>
- #include <linux/module.h>
-+#include <linux/pfn.h>
- #include <linux/root_dev.h>
- #include <linux/cpu.h>
- #include <linux/kernel.h>
-@@ -30,13 +32,6 @@
- extern int root_mountflags;
- /*
-- * Bootloader-provided information about physical memory
-- */
--struct tag_mem_range *mem_phys;
--struct tag_mem_range *mem_reserved;
--struct tag_mem_range *mem_ramdisk;
--
--/*
- * Initialize loops_per_jiffy as 5000000 (500MIPS).
- * Better make it too large than too small...
- */
-@@ -48,48 +43,193 @@
- static char __initdata command_line[COMMAND_LINE_SIZE];
-
- /*
-- * Should be more than enough, but if you have a _really_ complex
-- * setup, you might need to increase the size of this...
-+ * Standard memory resources
- */
--static struct tag_mem_range __initdata mem_range_cache[32];
--static unsigned mem_range_next_free;
-+static struct resource __initdata kernel_data = {
-+ .name = "Kernel data",
-+ .start = 0,
-+ .end = 0,
-+ .flags = IORESOURCE_MEM,
-+};
-+static struct resource __initdata kernel_code = {
-+ .name = "Kernel code",
-+ .start = 0,
-+ .end = 0,
-+ .flags = IORESOURCE_MEM,
-+ .sibling = &kernel_data,
-+};
-
- /*
-- * Standard memory resources
-+ * Available system RAM and reserved regions as singly linked
-+ * lists. These lists are traversed using the sibling pointer in
-+ * struct resource and are kept sorted at all times.
- */
--static struct resource mem_res[] = {
-- {
-- .name = "Kernel code",
-- .start = 0,
-- .end = 0,
-- .flags = IORESOURCE_MEM
-- },
-- {
-- .name = "Kernel data",
-- .start = 0,
-- .end = 0,
-- .flags = IORESOURCE_MEM,
-- },
--};
-+static struct resource *__initdata system_ram;
-+static struct resource *__initdata reserved = &kernel_code;
-+
-+/*
-+ * We need to allocate these before the bootmem allocator is up and
-+ * running, so we need this "cache". 32 entries are probably enough
-+ * for all but the most insanely complex systems.
-+ */
-+static struct resource __initdata res_cache[32];
-+static unsigned int __initdata res_cache_next_free;
-+
-+static void __init resource_init(void)
-+{
-+ struct resource *mem, *res;
-+ struct resource *new;
-+
-+ kernel_code.start = __pa(init_mm.start_code);
-+
-+ for (mem = system_ram; mem; mem = mem->sibling) {
-+ new = alloc_bootmem_low(sizeof(struct resource));
-+ memcpy(new, mem, sizeof(struct resource));
-+
-+ new->sibling = NULL;
-+ if (request_resource(&iomem_resource, new))
-+ printk(KERN_WARNING "Bad RAM resource %08x-%08x\n",
-+ mem->start, mem->end);
-+ }
-+
-+ for (res = reserved; res; res = res->sibling) {
-+ new = alloc_bootmem_low(sizeof(struct resource));
-+ memcpy(new, res, sizeof(struct resource));
-+
-+ new->sibling = NULL;
-+ if (insert_resource(&iomem_resource, new))
-+ printk(KERN_WARNING
-+ "Bad reserved resource %s (%08x-%08x)\n",
-+ res->name, res->start, res->end);
-+ }
-+}
-+
-+static void __init
-+add_physical_memory(resource_size_t start, resource_size_t end)
-+{
-+ struct resource *new, *next, **pprev;
-+
-+ for (pprev = &system_ram, next = system_ram; next;
-+ pprev = &next->sibling, next = next->sibling) {
-+ if (end < next->start)
-+ break;
-+ if (start <= next->end) {
-+ printk(KERN_WARNING
-+ "Warning: Physical memory map is broken\n");
-+ printk(KERN_WARNING
-+ "Warning: %08x-%08x overlaps %08x-%08x\n",
-+ start, end, next->start, next->end);
-+ return;
-+ }
-+ }
-+
-+ if (res_cache_next_free >= ARRAY_SIZE(res_cache)) {
-+ printk(KERN_WARNING
-+ "Warning: Failed to add physical memory %08x-%08x\n",
-+ start, end);
-+ return;
-+ }
-+
-+ new = &res_cache[res_cache_next_free++];
-+ new->start = start;
-+ new->end = end;
-+ new->name = "System RAM";
-+ new->flags = IORESOURCE_MEM;
-+
-+ *pprev = new;
-+}
-+
-+static int __init
-+add_reserved_region(resource_size_t start, resource_size_t end,
-+ const char *name)
-+{
-+ struct resource *new, *next, **pprev;
-+
-+ if (end < start)
-+ return -EINVAL;
-+
-+ if (res_cache_next_free >= ARRAY_SIZE(res_cache))
-+ return -ENOMEM;
-+
-+ for (pprev = &reserved, next = reserved; next;
-+ pprev = &next->sibling, next = next->sibling) {
-+ if (end < next->start)
-+ break;
-+ if (start <= next->end)
-+ return -EBUSY;
-+ }
++static DEFINE_SPINLOCK(pm_lock);
+
-+ new = &res_cache[res_cache_next_free++];
-+ new->start = start;
-+ new->end = end;
-+ new->name = name;
-+ new->flags = IORESOURCE_MEM;
+ unsigned long at32ap7000_osc_rates[3] = {
+ [0] = 32768,
+ /* FIXME: these are ATSTK1002-specific */
+@@ -104,11 +112,11 @@
+ {
+ unsigned long div, mul, rate;
--#define kernel_code mem_res[0]
--#define kernel_data mem_res[1]
-+ *pprev = new;
-+
-+ return 0;
-+}
-+
-+static unsigned long __init
-+find_free_region(const struct resource *mem, resource_size_t size,
-+ resource_size_t align)
-+{
-+ struct resource *res;
-+ unsigned long target;
-+
-+ target = ALIGN(mem->start, align);
-+ for (res = reserved; res; res = res->sibling) {
-+ if ((target + size) <= res->start)
-+ break;
-+ if (target <= res->end)
-+ target = ALIGN(res->end + 1, align);
-+ }
-+
-+ if ((target + size) > (mem->end + 1))
-+ return mem->end + 1;
-+
-+ return target;
-+}
-+
-+static int __init
-+alloc_reserved_region(resource_size_t *start, resource_size_t size,
-+ resource_size_t align, const char *name)
-+{
-+ struct resource *mem;
-+ resource_size_t target;
-+ int ret;
-+
-+ for (mem = system_ram; mem; mem = mem->sibling) {
-+ target = find_free_region(mem, size, align);
-+ if (target <= mem->end) {
-+ ret = add_reserved_region(target, target + size - 1,
-+ name);
-+ if (!ret)
-+ *start = target;
-+ return ret;
-+ }
-+ }
-+
-+ return -ENOMEM;
-+}
+- if (!(control & SM_BIT(PLLEN)))
++ if (!(control & PM_BIT(PLLEN)))
+ return 0;
- /*
- * Early framebuffer allocation. Works as follows:
- * - If fbmem_size is zero, nothing will be allocated or reserved.
- * - If fbmem_start is zero when setup_bootmem() is called,
-- * fbmem_size bytes will be allocated from the bootmem allocator.
-+ * a block of fbmem_size bytes will be reserved before bootmem
-+ * initialization. It will be aligned to the largest page size
-+ * that fbmem_size is a multiple of.
- * - If fbmem_start is nonzero, an area of size fbmem_size will be
-- * reserved at the physical address fbmem_start if necessary. If
-- * the area isn't in a memory region known to the kernel, it will
-- * be left alone.
-+ * reserved at the physical address fbmem_start if possible. If
-+ * it collides with other reserved memory, a different block of
-+ * same size will be allocated, just as if fbmem_start was zero.
- *
- * Board-specific code may use these variables to set up platform data
- * for the framebuffer driver if fbmem_size is nonzero.
- */
--static unsigned long __initdata fbmem_start;
--static unsigned long __initdata fbmem_size;
-+resource_size_t __initdata fbmem_start;
-+resource_size_t __initdata fbmem_size;
+- div = SM_BFEXT(PLLDIV, control) + 1;
+- mul = SM_BFEXT(PLLMUL, control) + 1;
++ div = PM_BFEXT(PLLDIV, control) + 1;
++ mul = PM_BFEXT(PLLMUL, control) + 1;
- /*
- * "fbmem=xxx[kKmM]" allocates the specified amount of boot memory for
-@@ -103,48 +243,42 @@
- */
- static int __init early_parse_fbmem(char *p)
+ rate = clk->parent->get_rate(clk->parent);
+ rate = (rate + div / 2) / div;
+@@ -121,7 +129,7 @@
{
-+ int ret;
-+ unsigned long align;
-+
- fbmem_size = memparse(p, &p);
-- if (*p == '@')
-+ if (*p == '@') {
- fbmem_start = memparse(p, &p);
-- return 0;
--}
--early_param("fbmem", early_parse_fbmem);
--
--static inline void __init resource_init(void)
--{
-- struct tag_mem_range *region;
--
-- kernel_code.start = __pa(init_mm.start_code);
-- kernel_code.end = __pa(init_mm.end_code - 1);
-- kernel_data.start = __pa(init_mm.end_code);
-- kernel_data.end = __pa(init_mm.brk - 1);
-+ ret = add_reserved_region(fbmem_start,
-+ fbmem_start + fbmem_size - 1,
-+ "Framebuffer");
-+ if (ret) {
-+ printk(KERN_WARNING
-+ "Failed to reserve framebuffer memory\n");
-+ fbmem_start = 0;
-+ }
-+ }
+ u32 control;
-- for (region = mem_phys; region; region = region->next) {
-- struct resource *res;
-- unsigned long phys_start, phys_end;
--
-- if (region->size == 0)
-- continue;
--
-- phys_start = region->addr;
-- phys_end = phys_start + region->size - 1;
--
-- res = alloc_bootmem_low(sizeof(*res));
-- res->name = "System RAM";
-- res->start = phys_start;
-- res->end = phys_end;
-- res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
--
-- request_resource (&iomem_resource, res);
--
-- if (kernel_code.start >= res->start &&
-- kernel_code.end <= res->end)
-- request_resource (res, &kernel_code);
-- if (kernel_data.start >= res->start &&
-- kernel_data.end <= res->end)
-- request_resource (res, &kernel_data);
-+ if (!fbmem_start) {
-+ if ((fbmem_size & 0x000fffffUL) == 0)
-+ align = 0x100000; /* 1 MiB */
-+ else if ((fbmem_size & 0x0000ffffUL) == 0)
-+ align = 0x10000; /* 64 KiB */
-+ else
-+ align = 0x1000; /* 4 KiB */
-+
-+ ret = alloc_reserved_region(&fbmem_start, fbmem_size,
-+ align, "Framebuffer");
-+ if (ret) {
-+ printk(KERN_WARNING
-+ "Failed to allocate framebuffer memory\n");
-+ fbmem_size = 0;
-+ }
- }
-+
-+ return 0;
- }
-+early_param("fbmem", early_parse_fbmem);
+- control = sm_readl(&system_manager, PM_PLL0);
++ control = pm_readl(PLL0);
- static int __init parse_tag_core(struct tag *tag)
- {
-@@ -157,11 +291,9 @@
+ return pll_get_rate(clk, control);
}
- __tagtable(ATAG_CORE, parse_tag_core);
-
--static int __init parse_tag_mem_range(struct tag *tag,
-- struct tag_mem_range **root)
-+static int __init parse_tag_mem(struct tag *tag)
+@@ -130,7 +138,7 @@
{
-- struct tag_mem_range *cur, **pprev;
-- struct tag_mem_range *new;
-+ unsigned long start, end;
-
- /*
- * Ignore zero-sized entries. If we're running standalone, the
-@@ -171,34 +303,53 @@
- if (tag->u.mem_range.size == 0)
- return 0;
+ u32 control;
-- /*
-- * Copy the data so the bootmem init code doesn't need to care
-- * about it.
-- */
-- if (mem_range_next_free >= ARRAY_SIZE(mem_range_cache))
-- panic("Physical memory map too complex!\n");
-+ start = tag->u.mem_range.addr;
-+ end = tag->u.mem_range.addr + tag->u.mem_range.size - 1;
-
-- new = &mem_range_cache[mem_range_next_free++];
-- *new = tag->u.mem_range;
-+ add_physical_memory(start, end);
-+ return 0;
-+}
-+__tagtable(ATAG_MEM, parse_tag_mem);
+- control = sm_readl(&system_manager, PM_PLL1);
++ control = pm_readl(PLL1);
-- pprev = root;
-- cur = *root;
-- while (cur) {
-- pprev = &cur->next;
-- cur = cur->next;
-+static int __init parse_tag_rdimg(struct tag *tag)
-+{
-+#ifdef CONFIG_INITRD
-+ struct tag_mem_range *mem = &tag->u.mem_range;
-+ int ret;
-+
-+ if (initrd_start) {
-+ printk(KERN_WARNING
-+ "Warning: Only the first initrd image will be used\n");
-+ return 0;
- }
-
-- *pprev = new;
-- new->next = NULL;
-+ ret = add_reserved_region(mem->start, mem->start + mem->size - 1,
-+ "initrd");
-+ if (ret) {
-+ printk(KERN_WARNING
-+ "Warning: Failed to reserve initrd memory\n");
-+ return ret;
-+ }
-+
-+ initrd_start = (unsigned long)__va(mem->addr);
-+ initrd_end = initrd_start + mem->size;
-+#else
-+ printk(KERN_WARNING "RAM disk image present, but "
-+ "no initrd support in kernel, ignoring\n");
-+#endif
-
- return 0;
+ return pll_get_rate(clk, control);
}
-+__tagtable(ATAG_RDIMG, parse_tag_rdimg);
+@@ -187,108 +195,139 @@
--static int __init parse_tag_mem(struct tag *tag)
-+static int __init parse_tag_rsvd_mem(struct tag *tag)
+ static void cpu_clk_mode(struct clk *clk, int enabled)
{
-- return parse_tag_mem_range(tag, &mem_phys);
-+ struct tag_mem_range *mem = &tag->u.mem_range;
-+
-+ return add_reserved_region(mem->addr, mem->addr + mem->size - 1,
-+ "Reserved");
+- struct at32_sm *sm = &system_manager;
+ unsigned long flags;
+ u32 mask;
+
+- spin_lock_irqsave(&sm->lock, flags);
+- mask = sm_readl(sm, PM_CPU_MASK);
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(CPU_MASK);
+ if (enabled)
+ mask |= 1 << clk->index;
+ else
+ mask &= ~(1 << clk->index);
+- sm_writel(sm, PM_CPU_MASK, mask);
+- spin_unlock_irqrestore(&sm->lock, flags);
++ pm_writel(CPU_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
}
--__tagtable(ATAG_MEM, parse_tag_mem);
-+__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
- static int __init parse_tag_cmdline(struct tag *tag)
+ static unsigned long cpu_clk_get_rate(struct clk *clk)
{
-@@ -207,12 +358,6 @@
- }
- __tagtable(ATAG_CMDLINE, parse_tag_cmdline);
+ unsigned long cksel, shift = 0;
--static int __init parse_tag_rdimg(struct tag *tag)
--{
-- return parse_tag_mem_range(tag, &mem_ramdisk);
--}
--__tagtable(ATAG_RDIMG, parse_tag_rdimg);
--
- static int __init parse_tag_clock(struct tag *tag)
- {
- /*
-@@ -223,12 +368,6 @@
- }
- __tagtable(ATAG_CLOCK, parse_tag_clock);
+- cksel = sm_readl(&system_manager, PM_CKSEL);
+- if (cksel & SM_BIT(CPUDIV))
+- shift = SM_BFEXT(CPUSEL, cksel) + 1;
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(CPUDIV))
++ shift = PM_BFEXT(CPUSEL, cksel) + 1;
--static int __init parse_tag_rsvd_mem(struct tag *tag)
--{
-- return parse_tag_mem_range(tag, &mem_reserved);
--}
--__tagtable(ATAG_RSVD_MEM, parse_tag_rsvd_mem);
--
- /*
- * Scan the tag table for this tag, and call its parse function. The
- * tag table is built by the linker from all the __tagtable
-@@ -260,10 +399,137 @@
- t->hdr.tag);
+ return bus_clk_get_rate(clk, shift);
}
-+/*
-+ * Find a free memory region large enough for storing the
-+ * bootmem bitmap.
-+ */
-+static unsigned long __init
-+find_bootmap_pfn(const struct resource *mem)
++static long cpu_clk_set_rate(struct clk *clk, unsigned long rate, int apply)
+{
-+ unsigned long bootmap_pages, bootmap_len;
-+ unsigned long node_pages = PFN_UP(mem->end - mem->start + 1);
-+ unsigned long bootmap_start;
-+
-+ bootmap_pages = bootmem_bootmap_pages(node_pages);
-+ bootmap_len = bootmap_pages << PAGE_SHIFT;
++ u32 control;
++ unsigned long parent_rate, child_div, actual_rate, div;
+
-+ /*
-+ * Find a large enough region without reserved pages for
-+ * storing the bootmem bitmap. We can take advantage of the
-+ * fact that all lists have been sorted.
-+ *
-+ * We have to check that we don't collide with any reserved
-+ * regions, which includes the kernel image and any RAMDISK
-+ * images.
-+ */
-+ bootmap_start = find_free_region(mem, bootmap_len, PAGE_SIZE);
-+
-+ return bootmap_start >> PAGE_SHIFT;
-+}
-+
-+#define MAX_LOWMEM HIGHMEM_START
-+#define MAX_LOWMEM_PFN PFN_DOWN(MAX_LOWMEM)
-+
-+static void __init setup_bootmem(void)
-+{
-+ unsigned bootmap_size;
-+ unsigned long first_pfn, bootmap_pfn, pages;
-+ unsigned long max_pfn, max_low_pfn;
-+ unsigned node = 0;
-+ struct resource *res;
++ parent_rate = clk->parent->get_rate(clk->parent);
++ control = pm_readl(CKSEL);
+
-+ printk(KERN_INFO "Physical memory:\n");
-+ for (res = system_ram; res; res = res->sibling)
-+ printk(" %08x-%08x\n", res->start, res->end);
-+ printk(KERN_INFO "Reserved memory:\n");
-+ for (res = reserved; res; res = res->sibling)
-+ printk(" %08x-%08x: %s\n",
-+ res->start, res->end, res->name);
-+
-+ nodes_clear(node_online_map);
-+
-+ if (system_ram->sibling)
-+ printk(KERN_WARNING "Only using first memory bank\n");
-+
-+ for (res = system_ram; res; res = NULL) {
-+ first_pfn = PFN_UP(res->start);
-+ max_low_pfn = max_pfn = PFN_DOWN(res->end + 1);
-+ bootmap_pfn = find_bootmap_pfn(res);
-+ if (bootmap_pfn > max_pfn)
-+ panic("No space for bootmem bitmap!\n");
-+
-+ if (max_low_pfn > MAX_LOWMEM_PFN) {
-+ max_low_pfn = MAX_LOWMEM_PFN;
-+#ifndef CONFIG_HIGHMEM
-+ /*
-+ * Lowmem is memory that can be addressed
-+ * directly through P1/P2
-+ */
-+ printk(KERN_WARNING
-+ "Node %u: Only %ld MiB of memory will be used.\n",
-+ node, MAX_LOWMEM >> 20);
-+ printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
-+#else
-+#error HIGHMEM is not supported by AVR32 yet
-+#endif
-+ }
-+
-+ /* Initialize the boot-time allocator with low memory only. */
-+ bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn,
-+ first_pfn, max_low_pfn);
-+
-+ /*
-+ * Register fully available RAM pages with the bootmem
-+ * allocator.
-+ */
-+ pages = max_low_pfn - first_pfn;
-+ free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn),
-+ PFN_PHYS(pages));
++ if (control & PM_BIT(HSBDIV))
++ child_div = 1 << (PM_BFEXT(HSBSEL, control) + 1);
++ else
++ child_div = 1;
+
-+ /* Reserve space for the bootmem bitmap... */
-+ reserve_bootmem_node(NODE_DATA(node),
-+ PFN_PHYS(bootmap_pfn),
-+ bootmap_size);
++ if (rate > 3 * (parent_rate / 4) || child_div == 1) {
++ actual_rate = parent_rate;
++ control &= ~PM_BIT(CPUDIV);
++ } else {
++ unsigned int cpusel;
++ div = (parent_rate + rate / 2) / rate;
++ if (div > child_div)
++ div = child_div;
++ cpusel = (div > 1) ? (fls(div) - 2) : 0;
++ control = PM_BIT(CPUDIV) | PM_BFINS(CPUSEL, cpusel, control);
++ actual_rate = parent_rate / (1 << (cpusel + 1));
++ }
+
-+ /* ...and any other reserved regions. */
-+ for (res = reserved; res; res = res->sibling) {
-+ if (res->start > PFN_PHYS(max_pfn))
-+ break;
++ pr_debug("clk %s: new rate %lu (actual rate %lu)\n",
++ clk->name, rate, actual_rate);
+
-+ /*
-+ * resource_init will complain about partial
-+ * overlaps, so we'll just ignore such
-+ * resources for now.
-+ */
-+ if (res->start >= PFN_PHYS(first_pfn)
-+ && res->end < PFN_PHYS(max_pfn))
-+ reserve_bootmem_node(
-+ NODE_DATA(node), res->start,
-+ res->end - res->start + 1);
-+ }
++ if (apply)
++ pm_writel(CKSEL, control);
+
-+ node_set_online(node);
-+ }
++ return actual_rate;
+}
+
- void __init setup_arch (char **cmdline_p)
+ static void hsb_clk_mode(struct clk *clk, int enabled)
{
- struct clk *cpu_clk;
-
-+ init_mm.start_code = (unsigned long)_text;
-+ init_mm.end_code = (unsigned long)_etext;
-+ init_mm.end_data = (unsigned long)_edata;
-+ init_mm.brk = (unsigned long)_end;
-+
-+ /*
-+ * Include .init section to make allocations easier. It will
-+ * be removed before the resource is actually requested.
-+ */
-+ kernel_code.start = __pa(__init_begin);
-+ kernel_code.end = __pa(init_mm.end_code - 1);
-+ kernel_data.start = __pa(init_mm.end_code);
-+ kernel_data.end = __pa(init_mm.brk - 1);
-+
- parse_tags(bootloader_tags);
-
- setup_processor();
-@@ -289,24 +555,16 @@
- ((cpu_hz + 500) / 1000) % 1000);
- }
-
-- init_mm.start_code = (unsigned long) &_text;
-- init_mm.end_code = (unsigned long) &_etext;
-- init_mm.end_data = (unsigned long) &_edata;
-- init_mm.brk = (unsigned long) &_end;
--
- strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
- *cmdline_p = command_line;
- parse_early_param();
-
- setup_bootmem();
-
-- board_setup_fbmem(fbmem_start, fbmem_size);
--
- #ifdef CONFIG_VT
- conswitchp = &dummy_con;
- #endif
-
- paging_init();
--
- resource_init();
+- struct at32_sm *sm = &system_manager;
+ unsigned long flags;
+ u32 mask;
+
+- spin_lock_irqsave(&sm->lock, flags);
+- mask = sm_readl(sm, PM_HSB_MASK);
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(HSB_MASK);
+ if (enabled)
+ mask |= 1 << clk->index;
+ else
+ mask &= ~(1 << clk->index);
+- sm_writel(sm, PM_HSB_MASK, mask);
+- spin_unlock_irqrestore(&sm->lock, flags);
++ pm_writel(HSB_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
}
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/time.c avr32-git/arch/avr32/kernel/time.c
---- linux-2.6.21.3/arch/avr32/kernel/time.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/kernel/time.c 2007-06-06 11:33:46.000000000 +0200
-@@ -1,5 +1,5 @@
- /*
-- * Copyright (C) 2004-2006 Atmel Corporation
-+ * Copyright (C) 2004-2007 Atmel Corporation
- *
- * Based on MIPS implementation arch/mips/kernel/time.c
- * Copyright 2001 MontaVista Software Inc.
-@@ -20,18 +20,25 @@
- #include <linux/init.h>
- #include <linux/profile.h>
- #include <linux/sysdev.h>
-+#include <linux/err.h>
-
- #include <asm/div64.h>
- #include <asm/sysreg.h>
- #include <asm/io.h>
- #include <asm/sections.h>
--static cycle_t read_cycle_count(void)
-+/* how many counter cycles in a jiffy? */
-+static u32 cycles_per_jiffy;
-+
-+/* the count value for the next timer interrupt */
-+static u32 expirelo;
-+
-+cycle_t __weak read_cycle_count(void)
+ static unsigned long hsb_clk_get_rate(struct clk *clk)
{
- return (cycle_t)sysreg_read(COUNT);
- }
+ unsigned long cksel, shift = 0;
--static struct clocksource clocksource_avr32 = {
-+struct clocksource __weak clocksource_avr32 = {
- .name = "avr32",
- .rating = 350,
- .read = read_cycle_count,
-@@ -40,12 +47,20 @@
- .flags = CLOCK_SOURCE_IS_CONTINUOUS,
- };
+- cksel = sm_readl(&system_manager, PM_CKSEL);
+- if (cksel & SM_BIT(HSBDIV))
+- shift = SM_BFEXT(HSBSEL, cksel) + 1;
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(HSBDIV))
++ shift = PM_BFEXT(HSBSEL, cksel) + 1;
-+irqreturn_t __weak timer_interrupt(int irq, void *dev_id);
-+
-+struct irqaction timer_irqaction = {
-+ .handler = timer_interrupt,
-+ .flags = IRQF_DISABLED,
-+ .name = "timer",
-+};
-+
- /*
- * By default we provide the null RTC ops
- */
- static unsigned long null_rtc_get_time(void)
- {
-- return mktime(2004, 1, 1, 0, 0, 0);
-+ return mktime(2007, 1, 1, 0, 0, 0);
+ return bus_clk_get_rate(clk, shift);
}
- static int null_rtc_set_time(unsigned long sec)
-@@ -56,23 +71,14 @@
- static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
- static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
-
--/* how many counter cycles in a jiffy? */
--static unsigned long cycles_per_jiffy;
--
--/* cycle counter value at the previous timer interrupt */
--static unsigned int timerhi, timerlo;
--
--/* the count value for the next timer interrupt */
--static unsigned int expirelo;
--
- static void avr32_timer_ack(void)
+ static void pba_clk_mode(struct clk *clk, int enabled)
{
-- unsigned int count;
-+ u32 count;
-
- /* Ack this timer interrupt and set the next one */
- expirelo += cycles_per_jiffy;
-+ /* setting COMPARE to 0 stops the COUNT-COMPARE */
- if (expirelo == 0) {
-- printk(KERN_DEBUG "expirelo == 0\n");
- sysreg_write(COMPARE, expirelo + 1);
- } else {
- sysreg_write(COMPARE, expirelo);
-@@ -86,27 +92,56 @@
- }
+- struct at32_sm *sm = &system_manager;
+ unsigned long flags;
+ u32 mask;
+
+- spin_lock_irqsave(&sm->lock, flags);
+- mask = sm_readl(sm, PM_PBA_MASK);
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(PBA_MASK);
+ if (enabled)
+ mask |= 1 << clk->index;
+ else
+ mask &= ~(1 << clk->index);
+- sm_writel(sm, PM_PBA_MASK, mask);
+- spin_unlock_irqrestore(&sm->lock, flags);
++ pm_writel(PBA_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
}
--static unsigned int avr32_hpt_read(void)
-+int __weak avr32_hpt_init(void)
+ static unsigned long pba_clk_get_rate(struct clk *clk)
{
-- return sysreg_read(COUNT);
-+ int ret;
-+ unsigned long mult, shift, count_hz;
-+
-+ count_hz = clk_get_rate(boot_cpu_data.clk);
-+ shift = clocksource_avr32.shift;
-+ mult = clocksource_hz2mult(count_hz, shift);
-+ clocksource_avr32.mult = mult;
-+
-+ {
-+ u64 tmp;
-+
-+ tmp = TICK_NSEC;
-+ tmp <<= shift;
-+ tmp += mult / 2;
-+ do_div(tmp, mult);
-+
-+ cycles_per_jiffy = tmp;
-+ }
-+
-+ ret = setup_irq(0, &timer_irqaction);
-+ if (ret) {
-+ pr_debug("timer: could not request IRQ 0: %d\n", ret);
-+ return -ENODEV;
-+ }
-+
-+ printk(KERN_INFO "timer: AT32AP COUNT-COMPARE at irq 0, "
-+ "%lu.%03lu MHz\n",
-+ ((count_hz + 500) / 1000) / 1000,
-+ ((count_hz + 500) / 1000) % 1000);
-+
-+ return 0;
- }
+ unsigned long cksel, shift = 0;
- /*
- * Taken from MIPS c0_hpt_timer_init().
- *
-- * Why is it so complicated, and what is "count"? My assumption is
-- * that `count' specifies the "reference cycle", i.e. the cycle since
-- * reset that should mean "zero". The reason COUNT is written twice is
-- * probably to make sure we don't get any timer interrupts while we
-- * are messing with the counter.
-+ * The reason COUNT is written twice is probably to make sure we don't get any
-+ * timer interrupts while we are messing with the counter.
- */
--static void avr32_hpt_init(unsigned int count)
-+int __weak avr32_hpt_start(void)
- {
-- count = sysreg_read(COUNT) - count;
-+ u32 count = sysreg_read(COUNT);
- expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy;
- sysreg_write(COUNT, expirelo - cycles_per_jiffy);
- sysreg_write(COMPARE, expirelo);
- sysreg_write(COUNT, count);
-+
-+ return 0;
- }
+- cksel = sm_readl(&system_manager, PM_CKSEL);
+- if (cksel & SM_BIT(PBADIV))
+- shift = SM_BFEXT(PBASEL, cksel) + 1;
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(PBADIV))
++ shift = PM_BFEXT(PBASEL, cksel) + 1;
- /*
-@@ -115,26 +150,18 @@
- *
- * In UP mode, it is invoked from the (global) timer_interrupt.
- */
--static void local_timer_interrupt(int irq, void *dev_id)
-+void local_timer_interrupt(int irq, void *dev_id)
- {
- if (current->pid)
- profile_tick(CPU_PROFILING);
- update_process_times(user_mode(get_irq_regs()));
+ return bus_clk_get_rate(clk, shift);
}
--static irqreturn_t
--timer_interrupt(int irq, void *dev_id)
-+irqreturn_t __weak timer_interrupt(int irq, void *dev_id)
+ static void pbb_clk_mode(struct clk *clk, int enabled)
{
-- unsigned int count;
--
- /* ack timer interrupt and try to set next interrupt */
-- count = avr32_hpt_read();
- avr32_timer_ack();
-
-- /* Update timerhi/timerlo for intra-jiffy calibration */
-- timerhi += count < timerlo; /* Wrap around */
-- timerlo = count;
--
- /*
- * Call the generic timer interrupt handler
- */
-@@ -153,60 +180,37 @@
- return IRQ_HANDLED;
+- struct at32_sm *sm = &system_manager;
+ unsigned long flags;
+ u32 mask;
+
+- spin_lock_irqsave(&sm->lock, flags);
+- mask = sm_readl(sm, PM_PBB_MASK);
++ spin_lock_irqsave(&pm_lock, flags);
++ mask = pm_readl(PBB_MASK);
+ if (enabled)
+ mask |= 1 << clk->index;
+ else
+ mask &= ~(1 << clk->index);
+- sm_writel(sm, PM_PBB_MASK, mask);
+- spin_unlock_irqrestore(&sm->lock, flags);
++ pm_writel(PBB_MASK, mask);
++ spin_unlock_irqrestore(&pm_lock, flags);
}
--static struct irqaction timer_irqaction = {
-- .handler = timer_interrupt,
-- .flags = IRQF_DISABLED,
-- .name = "timer",
--};
--
- void __init time_init(void)
+ static unsigned long pbb_clk_get_rate(struct clk *clk)
{
-- unsigned long mult, shift, count_hz;
- int ret;
+ unsigned long cksel, shift = 0;
-+ /*
-+ * Make sure we don't get any COMPARE interrupts before we can
-+ * handle them.
-+ */
-+ sysreg_write(COMPARE, 0);
-+
- xtime.tv_sec = rtc_get_time();
- xtime.tv_nsec = 0;
-
- set_normalized_timespec(&wall_to_monotonic,
- -xtime.tv_sec, -xtime.tv_nsec);
-
-- printk("Before time_init: count=%08lx, compare=%08lx\n",
-- (unsigned long)sysreg_read(COUNT),
-- (unsigned long)sysreg_read(COMPARE));
--
-- count_hz = clk_get_rate(boot_cpu_data.clk);
-- shift = clocksource_avr32.shift;
-- mult = clocksource_hz2mult(count_hz, shift);
-- clocksource_avr32.mult = mult;
--
-- printk("Cycle counter: mult=%lu, shift=%lu\n", mult, shift);
--
-- {
-- u64 tmp;
--
-- tmp = TICK_NSEC;
-- tmp <<= shift;
-- tmp += mult / 2;
-- do_div(tmp, mult);
--
-- cycles_per_jiffy = tmp;
-+ ret = avr32_hpt_init();
-+ if (ret) {
-+ pr_debug("timer: failed setup: %d\n", ret);
-+ return;
- }
+- cksel = sm_readl(&system_manager, PM_CKSEL);
+- if (cksel & SM_BIT(PBBDIV))
+- shift = SM_BFEXT(PBBSEL, cksel) + 1;
++ cksel = pm_readl(CKSEL);
++ if (cksel & PM_BIT(PBBDIV))
++ shift = PM_BFEXT(PBBSEL, cksel) + 1;
-- /* This sets up the high precision timer for the first interrupt. */
-- avr32_hpt_init(avr32_hpt_read());
--
-- printk("After time_init: count=%08lx, compare=%08lx\n",
-- (unsigned long)sysreg_read(COUNT),
-- (unsigned long)sysreg_read(COMPARE));
--
- ret = clocksource_register(&clocksource_avr32);
- if (ret)
-- printk(KERN_ERR
-- "timer: could not register clocksource: %d\n", ret);
-+ pr_debug("timer: could not register clocksource: %d\n", ret);
+ return bus_clk_get_rate(clk, shift);
+ }
+@@ -296,6 +335,7 @@
+ static struct clk cpu_clk = {
+ .name = "cpu",
+ .get_rate = cpu_clk_get_rate,
++ .set_rate = cpu_clk_set_rate,
+ .users = 1,
+ };
+ static struct clk hsb_clk = {
+@@ -327,12 +367,12 @@
+ {
+ u32 control;
-- ret = setup_irq(0, &timer_irqaction);
-- if (ret)
-- printk("timer: could not request IRQ 0: %d\n", ret);
-+ ret = avr32_hpt_start();
-+ if (ret) {
-+ pr_debug("timer: failed starting: %d\n", ret);
-+ return;
-+ }
+- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
++ control = pm_readl(GCCTRL(clk->index));
+ if (enabled)
+- control |= SM_BIT(CEN);
++ control |= PM_BIT(CEN);
+ else
+- control &= ~SM_BIT(CEN);
+- sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control);
++ control &= ~PM_BIT(CEN);
++ pm_writel(GCCTRL(clk->index), control);
}
- static struct sysdev_class timer_class = {
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/traps.c avr32-git/arch/avr32/kernel/traps.c
---- linux-2.6.21.3/arch/avr32/kernel/traps.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/kernel/traps.c 2007-06-06 11:33:46.000000000 +0200
-@@ -5,158 +5,25 @@
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
--#undef DEBUG
--#include <linux/sched.h>
-+
-+#include <linux/bug.h>
- #include <linux/init.h>
--#include <linux/module.h>
- #include <linux/kallsyms.h>
-+#include <linux/module.h>
- #include <linux/notifier.h>
-+#include <linux/sched.h>
-+#include <linux/uaccess.h>
+ static unsigned long genclk_get_rate(struct clk *clk)
+@@ -340,9 +380,9 @@
+ u32 control;
+ unsigned long div = 1;
--#include <asm/traps.h>
--#include <asm/sysreg.h>
- #include <asm/addrspace.h>
--#include <asm/ocd.h>
- #include <asm/mmu_context.h>
--#include <asm/uaccess.h>
--
--static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
--{
-- unsigned long p;
-- int i;
--
-- printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
--
-- for (p = bottom & ~31; p < top; ) {
-- printk("%04lx: ", p & 0xffff);
--
-- for (i = 0; i < 8; i++, p += 4) {
-- unsigned int val;
--
-- if (p < bottom || p >= top)
-- printk(" ");
-- else {
-- if (__get_user(val, (unsigned int __user *)p)) {
-- printk("\n");
-- goto out;
-- }
-- printk("%08x ", val);
-- }
-- }
-- printk("\n");
-- }
--
--out:
-- return;
--}
--
--static inline int valid_stack_ptr(struct thread_info *tinfo, unsigned long p)
--{
-- return (p > (unsigned long)tinfo)
-- && (p < (unsigned long)tinfo + THREAD_SIZE - 3);
--}
--
--#ifdef CONFIG_FRAME_POINTER
--static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
-- struct pt_regs *regs)
--{
-- unsigned long lr, fp;
-- struct thread_info *tinfo;
--
-- tinfo = (struct thread_info *)
-- ((unsigned long)sp & ~(THREAD_SIZE - 1));
--
-- if (regs)
-- fp = regs->r7;
-- else if (tsk == current)
-- asm("mov %0, r7" : "=r"(fp));
-- else
-- fp = tsk->thread.cpu_context.r7;
--
-- /*
-- * Walk the stack as long as the frame pointer (a) is within
-- * the kernel stack of the task, and (b) it doesn't move
-- * downwards.
-- */
-- while (valid_stack_ptr(tinfo, fp)) {
-- unsigned long new_fp;
--
-- lr = *(unsigned long *)fp;
-- printk(" [<%08lx>] ", lr);
-- print_symbol("%s\n", lr);
--
-- new_fp = *(unsigned long *)(fp + 4);
-- if (new_fp <= fp)
-- break;
-- fp = new_fp;
-- }
-- printk("\n");
--}
--#else
--static inline void __show_trace(struct task_struct *tsk, unsigned long *sp,
-- struct pt_regs *regs)
--{
-- unsigned long addr;
--
-- while (!kstack_end(sp)) {
-- addr = *sp++;
-- if (kernel_text_address(addr)) {
-- printk(" [<%08lx>] ", addr);
-- print_symbol("%s\n", addr);
-- }
-- }
--}
--#endif
--
--void show_trace(struct task_struct *tsk, unsigned long *sp,
-- struct pt_regs *regs)
--{
-- if (regs &&
-- (((regs->sr & MODE_MASK) == MODE_EXCEPTION) ||
-- ((regs->sr & MODE_MASK) == MODE_USER)))
-- return;
--
-- printk ("Call trace:");
--#ifdef CONFIG_KALLSYMS
-- printk("\n");
--#endif
--
-- __show_trace(tsk, sp, regs);
-- printk("\n");
--}
--
--void show_stack(struct task_struct *tsk, unsigned long *sp)
--{
-- unsigned long stack;
--
-- if (!tsk)
-- tsk = current;
-- if (sp == 0) {
-- if (tsk == current) {
-- register unsigned long *real_sp __asm__("sp");
-- sp = real_sp;
-- } else {
-- sp = (unsigned long *)tsk->thread.cpu_context.ksp;
-- }
-- }
--
-- stack = (unsigned long)sp;
-- dump_mem("Stack: ", stack,
-- THREAD_SIZE + (unsigned long)tsk->thread_info);
-- show_trace(tsk, sp, NULL);
--}
--
--void dump_stack(void)
--{
-- show_stack(NULL, NULL);
--}
--EXPORT_SYMBOL(dump_stack);
-+#include <asm/ocd.h>
-+#include <asm/sysreg.h>
-+#include <asm/traps.h>
+- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
+- if (control & SM_BIT(DIVEN))
+- div = 2 * (SM_BFEXT(DIV, control) + 1);
++ control = pm_readl(GCCTRL(clk->index));
++ if (control & PM_BIT(DIVEN))
++ div = 2 * (PM_BFEXT(DIV, control) + 1);
- ATOMIC_NOTIFIER_HEAD(avr32_die_chain);
-
- int register_die_notifier(struct notifier_block *nb)
- {
-- pr_debug("register_die_notifier: %p\n", nb);
--
- return atomic_notifier_chain_register(&avr32_die_chain, nb);
+ return clk->parent->get_rate(clk->parent) / div;
}
- EXPORT_SYMBOL(register_die_notifier);
-@@ -169,98 +36,108 @@
+@@ -353,23 +393,22 @@
+ unsigned long parent_rate, actual_rate, div;
- static DEFINE_SPINLOCK(die_lock);
+ parent_rate = clk->parent->get_rate(clk->parent);
+- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
++ control = pm_readl(GCCTRL(clk->index));
--void __die(const char *str, struct pt_regs *regs, unsigned long err,
-- const char *file, const char *func, unsigned long line)
-+void NORET_TYPE die(const char *str, struct pt_regs *regs, long err)
- {
-- struct task_struct *tsk = current;
- static int die_counter;
-
- console_verbose();
- spin_lock_irq(&die_lock);
- bust_spinlocks(1);
-
-- printk(KERN_ALERT "%s", str);
-- if (file && func)
-- printk(" in %s:%s, line %ld", file, func, line);
-- printk("[#%d]:\n", ++die_counter);
-- print_modules();
-- show_regs(regs);
-- printk("Process %s (pid: %d, stack limit = 0x%p)\n",
-- tsk->comm, tsk->pid, tsk->thread_info + 1);
--
-- if (!user_mode(regs) || in_interrupt()) {
-- dump_mem("Stack: ", regs->sp,
-- THREAD_SIZE + (unsigned long)tsk->thread_info);
-+ printk(KERN_ALERT "Oops: %s, sig: %ld [#%d]\n" KERN_EMERG,
-+ str, err, ++die_counter);
-+#ifdef CONFIG_PREEMPT
-+ printk("PREEMPT ");
-+#endif
-+#ifdef CONFIG_FRAME_POINTER
-+ printk("FRAME_POINTER ");
-+#endif
-+ if (current_cpu_data.features & AVR32_FEATURE_OCD) {
-+ unsigned long did = __mfdr(DBGREG_DID);
-+ printk("chip: 0x%03lx:0x%04lx rev %lu\n",
-+ (did >> 1) & 0x7ff,
-+ (did >> 12) & 0x7fff,
-+ (did >> 28) & 0xf);
-+ } else {
-+ printk("cpu: arch %u r%u / core %u r%u\n",
-+ current_cpu_data.arch_type,
-+ current_cpu_data.arch_revision,
-+ current_cpu_data.cpu_type,
-+ current_cpu_data.cpu_revision);
+ if (rate > 3 * parent_rate / 4) {
+ actual_rate = parent_rate;
+- control &= ~SM_BIT(DIVEN);
++ control &= ~PM_BIT(DIVEN);
+ } else {
+ div = (parent_rate + rate) / (2 * rate) - 1;
+- control = SM_BFINS(DIV, div, control) | SM_BIT(DIVEN);
++ control = PM_BFINS(DIV, div, control) | PM_BIT(DIVEN);
+ actual_rate = parent_rate / (2 * (div + 1));
}
-+ print_modules();
-+ show_regs_log_lvl(regs, KERN_EMERG);
-+ show_stack_log_lvl(current, regs->sp, regs, KERN_EMERG);
- bust_spinlocks(0);
- spin_unlock_irq(&die_lock);
-- do_exit(SIGSEGV);
-+
-+ if (in_interrupt())
-+ panic("Fatal exception in interrupt");
-+
-+ if (panic_on_oops)
-+ panic("Fatal exception");
-+
-+ do_exit(err);
- }
+- printk("clk %s: new rate %lu (actual rate %lu)\n",
+- clk->name, rate, actual_rate);
++ dev_dbg(clk->dev, "clk %s: new rate %lu (actual rate %lu)\n",
++ clk->name, rate, actual_rate);
--void __die_if_kernel(const char *str, struct pt_regs *regs, unsigned long err,
-- const char *file, const char *func, unsigned long line)
-+void _exception(long signr, struct pt_regs *regs, int code,
-+ unsigned long addr)
- {
-+ siginfo_t info;
-+
- if (!user_mode(regs))
-- __die(str, regs, err, file, func, line);
--}
-+ die("Unhandled exception in kernel mode", regs, signr);
-+
-+ memset(&info, 0, sizeof(info));
-+ info.si_signo = signr;
-+ info.si_code = code;
-+ info.si_addr = (void __user *)addr;
-+ force_sig_info(signr, &info, current);
+ if (apply)
+- sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index,
+- control);
++ pm_writel(GCCTRL(clk->index), control);
--asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
--{
--#ifdef CONFIG_SUBARCH_AVR32B
- /*
-- * The exception entry always saves RSR_EX. For NMI, this is
-- * wrong; it should be RSR_NMI
-+ * Init gets no signals that it doesn't have a handler for.
-+ * That's all very well, but if it has caused a synchronous
-+ * exception and we ignore the resulting signal, it will just
-+ * generate the same exception over and over again and we get
-+ * nowhere. Better to kill it and let the kernel panic.
- */
-- regs->sr = sysreg_read(RSR_NMI);
--#endif
-+ if (is_init(current)) {
-+ __sighandler_t handler;
-
-- printk("NMI taken!!!!\n");
-- die("NMI", regs, ecr);
-- BUG();
-+ spin_lock_irq(&current->sighand->siglock);
-+ handler = current->sighand->action[signr-1].sa.sa_handler;
-+ spin_unlock_irq(&current->sighand->siglock);
-+ if (handler == SIG_DFL) {
-+ /* init has generated a synchronous exception
-+ and it doesn't have a handler for the signal */
-+ printk(KERN_CRIT "init has generated signal %ld "
-+ "but has no handler for it\n", signr);
-+ do_exit(signr);
-+ }
-+ }
-+}
-+
-+asmlinkage void do_nmi(unsigned long ecr, struct pt_regs *regs)
-+{
-+ printk(KERN_ALERT "Got Non-Maskable Interrupt, dumping regs\n");
-+ show_regs_log_lvl(regs, KERN_ALERT);
-+ show_stack_log_lvl(current, regs->sp, regs, KERN_ALERT);
+ return actual_rate;
}
-
- asmlinkage void do_critical_exception(unsigned long ecr, struct pt_regs *regs)
+@@ -378,24 +417,24 @@
{
-- printk("Unable to handle critical exception %lu at pc = %08lx!\n",
-- ecr, regs->pc);
-- die("Oops", regs, ecr);
-- BUG();
-+ die("Critical exception", regs, SIGKILL);
- }
-
- asmlinkage void do_address_exception(unsigned long ecr, struct pt_regs *regs)
- {
-- siginfo_t info;
--
-- die_if_kernel("Oops: Address exception in kernel mode", regs, ecr);
--
--#ifdef DEBUG
-- if (ecr == ECR_ADDR_ALIGN_X)
-- pr_debug("Instruction Address Exception at pc = %08lx\n",
-- regs->pc);
-- else if (ecr == ECR_ADDR_ALIGN_R)
-- pr_debug("Data Address Exception (Read) at pc = %08lx\n",
-- regs->pc);
-- else if (ecr == ECR_ADDR_ALIGN_W)
-- pr_debug("Data Address Exception (Write) at pc = %08lx\n",
-- regs->pc);
-- else
-- BUG();
--
-- show_regs(regs);
--#endif
--
-- info.si_signo = SIGBUS;
-- info.si_errno = 0;
-- info.si_code = BUS_ADRALN;
-- info.si_addr = (void __user *)regs->pc;
--
-- force_sig_info(SIGBUS, &info, current);
-+ _exception(SIGBUS, regs, BUS_ADRALN, regs->pc);
- }
-
- /* This way of handling undefined instructions is stolen from ARM */
- static LIST_HEAD(undef_hook);
--static spinlock_t undef_lock = SPIN_LOCK_UNLOCKED;
-+static DEFINE_SPINLOCK(undef_lock);
+ u32 control;
+
+- printk("clk %s: new parent %s (was %s)\n",
+- clk->name, parent->name, clk->parent->name);
++ dev_dbg(clk->dev, "clk %s: new parent %s (was %s)\n",
++ clk->name, parent->name, clk->parent->name);
+
+- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
++ control = pm_readl(GCCTRL(clk->index));
+
+ if (parent == &osc1 || parent == &pll1)
+- control |= SM_BIT(OSCSEL);
++ control |= PM_BIT(OSCSEL);
+ else if (parent == &osc0 || parent == &pll0)
+- control &= ~SM_BIT(OSCSEL);
++ control &= ~PM_BIT(OSCSEL);
+ else
+ return -EINVAL;
- void register_undef_hook(struct undef_hook *hook)
- {
-@@ -280,7 +157,8 @@
- {
- int cop_nr;
- u32 cpucr;
-- if ( (insn & 0xfdf00000) == 0xf1900000 )
-+
-+ if ((insn & 0xfdf00000) == 0xf1900000)
- /* LDC0 */
- cop_nr = 0;
+ if (parent == &pll0 || parent == &pll1)
+- control |= SM_BIT(PLLSEL);
++ control |= PM_BIT(PLLSEL);
else
-@@ -292,136 +170,91 @@
- sysreg_write(CPUCR, cpucr);
+- control &= ~SM_BIT(PLLSEL);
++ control &= ~PM_BIT(PLLSEL);
- cpucr = sysreg_read(CPUCR);
-- if ( !(cpucr & (1 << (24 + cop_nr))) ){
-- printk("Coprocessor #%i not found!\n", cop_nr);
-- return -1;
-- }
-+ if (!(cpucr & (1 << (24 + cop_nr))))
-+ return -ENODEV;
+- sm_writel(&system_manager, PM_GCCTRL + 4 * clk->index, control);
++ pm_writel(GCCTRL(clk->index), control);
+ clk->parent = parent;
return 0;
- }
-
--#ifdef CONFIG_BUG
--#ifdef CONFIG_DEBUG_BUGVERBOSE
--static inline void do_bug_verbose(struct pt_regs *regs, u32 insn)
--{
-- char *file;
-- u16 line;
-- char c;
--
-- if (__get_user(line, (u16 __user *)(regs->pc + 2)))
-- return;
-- if (__get_user(file, (char * __user *)(regs->pc + 4))
-- || (unsigned long)file < PAGE_OFFSET
-- || __get_user(c, file))
-- file = "<bad filename>";
--
-- printk(KERN_ALERT "kernel BUG at %s:%d!\n", file, line);
--}
--#else
--static inline void do_bug_verbose(struct pt_regs *regs, u32 insn)
-+int is_valid_bugaddr(unsigned long pc)
- {
-+ unsigned short opcode;
-+
-+ if (pc < PAGE_OFFSET)
-+ return 0;
-+ if (probe_kernel_address((u16 *)pc, opcode))
-+ return 0;
-
-+ return opcode == AVR32_BUG_OPCODE;
- }
--#endif
--#endif
-
- asmlinkage void do_illegal_opcode(unsigned long ecr, struct pt_regs *regs)
- {
- u32 insn;
- struct undef_hook *hook;
-- siginfo_t info;
- void __user *pc;
-+ long code;
-
-- if (!user_mode(regs))
-- goto kernel_trap;
-+ if (!user_mode(regs) && (ecr == ECR_ILLEGAL_OPCODE)) {
-+ enum bug_trap_type type;
-+
-+ type = report_bug(regs->pc);
-+ switch (type) {
-+ case BUG_TRAP_TYPE_NONE:
-+ break;
-+ case BUG_TRAP_TYPE_WARN:
-+ regs->pc += 2;
-+ return;
-+ case BUG_TRAP_TYPE_BUG:
-+ die("Kernel BUG", regs, SIGKILL);
-+ }
-+ }
+@@ -408,11 +447,11 @@
- local_irq_enable();
-
-- pc = (void __user *)instruction_pointer(regs);
-- if (__get_user(insn, (u32 __user *)pc))
-- goto invalid_area;
-+ if (user_mode(regs)) {
-+ pc = (void __user *)instruction_pointer(regs);
-+ if (get_user(insn, (u32 __user *)pc))
-+ goto invalid_area;
-
-- if (ecr == ECR_COPROC_ABSENT) {
-- if (do_cop_absent(insn) == 0)
-+ if (ecr == ECR_COPROC_ABSENT && !do_cop_absent(insn))
- return;
-- }
-
-- spin_lock_irq(&undef_lock);
-- list_for_each_entry(hook, &undef_hook, node) {
-- if ((insn & hook->insn_mask) == hook->insn_val) {
-- if (hook->fn(regs, insn) == 0) {
-- spin_unlock_irq(&undef_lock);
-- return;
-+ spin_lock_irq(&undef_lock);
-+ list_for_each_entry(hook, &undef_hook, node) {
-+ if ((insn & hook->insn_mask) == hook->insn_val) {
-+ if (hook->fn(regs, insn) == 0) {
-+ spin_unlock_irq(&undef_lock);
-+ return;
-+ }
- }
- }
-+ spin_unlock_irq(&undef_lock);
- }
-- spin_unlock_irq(&undef_lock);
--
--invalid_area:
+ BUG_ON(clk->index > 7);
--#ifdef DEBUG
-- printk("Illegal instruction at pc = %08lx\n", regs->pc);
-- if (regs->pc < TASK_SIZE) {
-- unsigned long ptbr, pgd, pte, *p;
--
-- ptbr = sysreg_read(PTBR);
-- p = (unsigned long *)ptbr;
-- pgd = p[regs->pc >> 22];
-- p = (unsigned long *)((pgd & 0x1ffff000) | 0x80000000);
-- pte = p[(regs->pc >> 12) & 0x3ff];
-- printk("page table: 0x%08lx -> 0x%08lx -> 0x%08lx\n", ptbr, pgd, pte);
-- }
--#endif
--
-- info.si_signo = SIGILL;
-- info.si_errno = 0;
-- info.si_addr = (void __user *)regs->pc;
- switch (ecr) {
-- case ECR_ILLEGAL_OPCODE:
-- case ECR_UNIMPL_INSTRUCTION:
-- info.si_code = ILL_ILLOPC;
-- break;
- case ECR_PRIVILEGE_VIOLATION:
-- info.si_code = ILL_PRVOPC;
-+ code = ILL_PRVOPC;
- break;
- case ECR_COPROC_ABSENT:
-- info.si_code = ILL_COPROC;
-+ code = ILL_COPROC;
- break;
- default:
-- BUG();
-+ code = ILL_ILLOPC;
-+ break;
- }
+- control = sm_readl(&system_manager, PM_GCCTRL + 4 * clk->index);
+- if (control & SM_BIT(OSCSEL))
+- parent = (control & SM_BIT(PLLSEL)) ? &pll1 : &osc1;
++ control = pm_readl(GCCTRL(clk->index));
++ if (control & PM_BIT(OSCSEL))
++ parent = (control & PM_BIT(PLLSEL)) ? &pll1 : &osc1;
+ else
+- parent = (control & SM_BIT(PLLSEL)) ? &pll0 : &osc0;
++ parent = (control & PM_BIT(PLLSEL)) ? &pll0 : &osc0;
-- force_sig_info(SIGILL, &info, current);
-+ _exception(SIGILL, regs, code, regs->pc);
- return;
-
--kernel_trap:
--#ifdef CONFIG_BUG
-- if (__kernel_text_address(instruction_pointer(regs))) {
-- insn = *(u16 *)instruction_pointer(regs);
-- if (insn == AVR32_BUG_OPCODE) {
-- do_bug_verbose(regs, insn);
-- die("Kernel BUG", regs, 0);
-- return;
-- }
-- }
--#endif
--
-- die("Oops: Illegal instruction in kernel code", regs, ecr);
-+invalid_area:
-+ _exception(SIGSEGV, regs, SEGV_MAPERR, regs->pc);
+ clk->parent = parent;
}
-
- asmlinkage void do_fpe(unsigned long ecr, struct pt_regs *regs)
- {
-- siginfo_t info;
--
-- printk("Floating-point exception at pc = %08lx\n", regs->pc);
--
-- /* We have no FPU... */
-- info.si_signo = SIGILL;
-- info.si_errno = 0;
-- info.si_addr = (void __user *)regs->pc;
-- info.si_code = ILL_COPROC;
--
-- force_sig_info(SIGILL, &info, current);
-+ /* We have no FPU yet */
-+ _exception(SIGILL, regs, ILL_COPROC, regs->pc);
- }
-
-
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/kernel/vmlinux.lds.c avr32-git/arch/avr32/kernel/vmlinux.lds.c
---- linux-2.6.21.3/arch/avr32/kernel/vmlinux.lds.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/kernel/vmlinux.lds.c 2007-06-06 11:33:46.000000000 +0200
-@@ -26,10 +26,16 @@
- _sinittext = .;
- *(.text.reset)
- *(.init.text)
-+ /*
-+ * .exit.text is discarded at runtime, not
-+ * link time, to deal with references from
-+ * __bug_table
-+ */
-+ *(.exit.text)
- _einittext = .;
- . = ALIGN(4);
- __tagtable_begin = .;
-- *(.taglist)
-+ *(.taglist.init)
- __tagtable_end = .;
- *(.init.data)
- . = ALIGN(16);
-@@ -86,6 +92,8 @@
- __stop___ex_table = .;
- }
-
-+ BUG_TABLE
+@@ -420,21 +459,53 @@
+ /* --------------------------------------------------------------------
+ * System peripherals
+ * -------------------------------------------------------------------- */
+-static struct resource sm_resource[] = {
+- PBMEM(0xfff00000),
+- NAMED_IRQ(19, "eim"),
+- NAMED_IRQ(20, "pm"),
+- NAMED_IRQ(21, "rtc"),
++static struct resource at32_pm0_resource[] = {
++ {
++ .start = 0xfff00000,
++ .end = 0xfff0007f,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(20),
+ };
+-struct platform_device at32_sm_device = {
+- .name = "sm",
+- .id = 0,
+- .resource = sm_resource,
+- .num_resources = ARRAY_SIZE(sm_resource),
+
- RODATA
-
- . = ALIGN(8192);
-@@ -126,7 +134,6 @@
- * thrown away, as cleanup code is never called unless it's a module.
- */
- /DISCARD/ : {
-- *(.exit.text)
- *(.exit.data)
- *(.exitcall.exit)
- }
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/at32ap7000.c avr32-git/arch/avr32/mach-at32ap/at32ap7000.c
---- linux-2.6.21.3/arch/avr32/mach-at32ap/at32ap7000.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/mach-at32ap/at32ap7000.c 2007-06-06 11:33:46.000000000 +0200
-@@ -6,6 +6,7 @@
- * published by the Free Software Foundation.
- */
- #include <linux/clk.h>
-+#include <linux/fb.h>
- #include <linux/init.h>
- #include <linux/platform_device.h>
- #include <linux/spi/spi.h>
-@@ -17,7 +18,10 @@
- #include <asm/arch/portmux.h>
- #include <asm/arch/sm.h>
-
-+#include <video/atmel_lcdc.h>
++static struct resource at32ap700x_rtc0_resource[] = {
++ {
++ .start = 0xfff00080,
++ .end = 0xfff000af,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(21),
++};
+
- #include "clock.h"
-+#include "hmatrix.h"
- #include "pio.h"
- #include "sm.h"
-
-@@ -416,7 +420,15 @@
- .resource = sm_resource,
- .num_resources = ARRAY_SIZE(sm_resource),
- };
--DEV_CLK(pclk, at32_sm, pbb, 0);
-+static struct clk at32_sm_pclk = {
-+ .name = "pclk",
-+ .dev = &at32_sm_device.dev,
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .users = 1,
-+ .index = 0,
++static struct resource at32_wdt0_resource[] = {
++ {
++ .start = 0xfff000b0,
++ .end = 0xfff000bf,
++ .flags = IORESOURCE_MEM,
++ },
+};
-
- static struct resource intc0_resource[] = {
- PBMEM(0xfff00400),
-@@ -442,6 +454,7 @@
- .mode = hsb_clk_mode,
- .get_rate = hsb_clk_get_rate,
- .users = 1,
-+ .index = 3,
++
++static struct resource at32_eic0_resource[] = {
++ {
++ .start = 0xfff00100,
++ .end = 0xfff0013f,
++ .flags = IORESOURCE_MEM,
++ },
++ IRQ(19),
};
-
- static struct resource smc0_resource[] = {
-@@ -466,6 +479,68 @@
+-static struct clk at32_sm_pclk = {
++
++DEFINE_DEV(at32_pm, 0);
++DEFINE_DEV(at32ap700x_rtc, 0);
++DEFINE_DEV(at32_wdt, 0);
++DEFINE_DEV(at32_eic, 0);
++
++/*
++ * Peripheral clock for PM, RTC, WDT and EIC. PM will ensure that this
++ * is always running.
++ */
++static struct clk at32_pm_pclk = {
+ .name = "pclk",
+- .dev = &at32_sm_device.dev,
++ .dev = &at32_pm0_device.dev,
+ .parent = &pbb_clk,
+ .mode = pbb_clk_mode,
+ .get_rate = pbb_clk_get_rate,
+@@ -491,6 +562,17 @@
.users = 1,
};
@@ -3448,71 +1708,28 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/at32ap7000
+DEFINE_DEV(dmaca, 0);
+DEV_CLK(hclk, dmaca0, hsb, 10);
+
-+/* --------------------------------------------------------------------
-+ * HMATRIX
-+ * -------------------------------------------------------------------- */
-+
-+static struct clk hmatrix_clk = {
-+ .name = "hmatrix_clk",
-+ .parent = &pbb_clk,
-+ .mode = pbb_clk_mode,
-+ .get_rate = pbb_clk_get_rate,
-+ .index = 2,
-+ .users = 1,
-+};
-+#define HMATRIX_BASE ((void __iomem *)0xfff00800)
-+
-+#define hmatrix_readl(reg) \
-+ __raw_readl((HMATRIX_BASE) + HMATRIX_##reg)
-+#define hmatrix_writel(reg,value) \
-+ __raw_writel((value), (HMATRIX_BASE) + HMATRIX_##reg)
-+
-+/*
-+ * Set bits in the HMATRIX Special Function Register (SFR) used by the
-+ * External Bus Interface (EBI). This can be used to enable special
-+ * features like CompactFlash support, NAND Flash support, etc. on
-+ * certain chipselects.
-+ */
-+static inline void set_ebi_sfr_bits(u32 mask)
-+{
-+ u32 sfr;
-+
-+ clk_enable(&hmatrix_clk);
-+ sfr = hmatrix_readl(SFR4);
-+ sfr |= mask;
-+ hmatrix_writel(SFR4, sfr);
-+ clk_disable(&hmatrix_clk);
-+}
-+
-+/* --------------------------------------------------------------------
-+ * System Timer/Counter (TC)
-+ * -------------------------------------------------------------------- */
-+static struct resource at32_systc0_resource[] = {
-+ PBMEM(0xfff00c00),
-+ IRQ(22),
-+};
-+struct platform_device at32_systc0_device = {
-+ .name = "systc",
-+ .id = 0,
-+ .resource = at32_systc0_resource,
-+ .num_resources = ARRAY_SIZE(at32_systc0_resource),
-+};
-+DEV_CLK(pclk, at32_systc0, pbb, 3);
-+
/* --------------------------------------------------------------------
- * PIO
+ * HMATRIX
* -------------------------------------------------------------------- */
-@@ -513,6 +588,9 @@
+@@ -583,12 +665,14 @@
+
+ void __init at32_add_system_devices(void)
+ {
+- system_manager.eim_first_irq = EIM_IRQ_BASE;
+-
+- platform_device_register(&at32_sm_device);
++ platform_device_register(&at32_pm0_device);
platform_device_register(&at32_intc0_device);
++ platform_device_register(&at32ap700x_rtc0_device);
++ platform_device_register(&at32_wdt0_device);
++ platform_device_register(&at32_eic0_device);
platform_device_register(&smc0_device);
platform_device_register(&pdc_device);
+ platform_device_register(&dmaca0_device);
-+
-+ platform_device_register(&at32_systc0_device);
- platform_device_register(&pio0_device);
- platform_device_register(&pio1_device);
-@@ -816,22 +894,105 @@
+ platform_device_register(&at32_systc0_device);
+
+@@ -894,6 +978,83 @@
}
/* --------------------------------------------------------------------
@@ -3595,132 +1812,153 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/at32ap7000
+/* --------------------------------------------------------------------
* LCDC
* -------------------------------------------------------------------- */
--static struct lcdc_platform_data lcdc0_data;
--static struct resource lcdc0_resource[] = {
-+static struct atmel_lcdfb_info atmel_lcdfb0_data;
-+static struct resource atmel_lcdfb0_resource[] = {
- {
- .start = 0xff000000,
- .end = 0xff000fff,
- .flags = IORESOURCE_MEM,
- },
- IRQ(1),
+ static struct atmel_lcdfb_info atmel_lcdfb0_data;
+@@ -1013,6 +1174,228 @@
+ }
+
+ /* --------------------------------------------------------------------
++ * USB Device Controller
++ * -------------------------------------------------------------------- */
++static struct resource usba0_resource[] __initdata = {
+ {
-+ /* Placeholder for pre-allocated fb memory */
-+ .start = 0x00000000,
-+ .end = 0x00000000,
-+ .flags = 0,
++ .name = "fifo",
++ .start = 0xff300000,
++ .end = 0xff3fffff,
++ .flags = IORESOURCE_MEM,
++ }, {
++ .name = "regs",
++ .start = 0xfff03000,
++ .end = 0xfff033ff,
++ .flags = IORESOURCE_MEM,
+ },
- };
--DEFINE_DEV_DATA(lcdc, 0);
--DEV_CLK(hclk, lcdc0, hsb, 7);
--static struct clk lcdc0_pixclk = {
-- .name = "pixclk",
-- .dev = &lcdc0_device.dev,
-+DEFINE_DEV_DATA(atmel_lcdfb, 0);
-+DEV_CLK(hck1, atmel_lcdfb0, hsb, 7);
-+static struct clk atmel_lcdfb0_pixclk = {
-+ .name = "lcdc_clk",
-+ .dev = &atmel_lcdfb0_device.dev,
- .mode = genclk_mode,
- .get_rate = genclk_get_rate,
- .set_rate = genclk_set_rate,
-@@ -840,13 +1001,34 @@
- };
-
- struct platform_device *__init
--at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data)
-+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-+ unsigned long fbmem_start, unsigned long fbmem_len)
- {
- struct platform_device *pdev;
-+ struct atmel_lcdfb_info *info;
-+ struct fb_monspecs *monspecs;
-+ struct fb_videomode *modedb;
-+ unsigned int modedb_size;
++ IRQ(31),
++};
++static struct clk usba0_pclk = {
++ .name = "pclk",
++ .parent = &pbb_clk,
++ .mode = pbb_clk_mode,
++ .get_rate = pbb_clk_get_rate,
++ .index = 12,
++};
++static struct clk usba0_hclk = {
++ .name = "hclk",
++ .parent = &hsb_clk,
++ .mode = hsb_clk_mode,
++ .get_rate = hsb_clk_get_rate,
++ .index = 6,
++};
+
-+ /*
-+ * Do a deep copy of the fb data, monspecs and modedb. Make
-+ * sure all allocations are done before setting up the
-+ * portmux.
-+ */
-+ monspecs = kmemdup(data->default_monspecs,
-+ sizeof(struct fb_monspecs), GFP_KERNEL);
-+ if (!monspecs)
++struct platform_device *__init
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data)
++{
++ struct platform_device *pdev;
++
++ if (id != 0)
+ return NULL;
+
-+ modedb_size = sizeof(struct fb_videomode) * monspecs->modedb_len;
-+ modedb = kmemdup(monspecs->modedb, modedb_size, GFP_KERNEL);
-+ if (!modedb)
-+ goto err_dup_modedb;
-+ monspecs->modedb = modedb;
-
- switch (id) {
- case 0:
-- pdev = &lcdc0_device;
-+ pdev = &atmel_lcdfb0_device;
- select_peripheral(PC(19), PERIPH_A, 0); /* CC */
- select_peripheral(PC(20), PERIPH_A, 0); /* HSYNC */
- select_peripheral(PC(21), PERIPH_A, 0); /* PCLK */
-@@ -879,16 +1061,133 @@
- select_peripheral(PD(16), PERIPH_A, 0); /* DATA22 */
- select_peripheral(PD(17), PERIPH_A, 0); /* DATA23 */
-
-- clk_set_parent(&lcdc0_pixclk, &pll0);
-- clk_set_rate(&lcdc0_pixclk, clk_get_rate(&pll0));
-+ clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
-+ clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-+ break;
++ pdev = platform_device_alloc("atmel_usba_udc", 0);
++ if (!pdev)
++ return NULL;
+
-+ default:
-+ goto err_invalid_id;
-+ }
++ if (platform_device_add_resources(pdev, usba0_resource,
++ ARRAY_SIZE(usba0_resource)))
++ goto out_free_pdev;
+
-+ if (fbmem_len) {
-+ pdev->resource[2].start = fbmem_start;
-+ pdev->resource[2].end = fbmem_start + fbmem_len - 1;
-+ pdev->resource[2].flags = IORESOURCE_MEM;
++ if (data) {
++ if (platform_device_add_data(pdev, data, sizeof(*data)))
++ goto out_free_pdev;
++
++ if (data->vbus_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->vbus_pin, 0);
+ }
+
-+ info = pdev->dev.platform_data;
-+ memcpy(info, data, sizeof(struct atmel_lcdfb_info));
-+ info->default_monspecs = monspecs;
++ usba0_pclk.dev = &pdev->dev;
++ usba0_hclk.dev = &pdev->dev;
++
++ platform_device_add(pdev);
+
-+ platform_device_register(pdev);
+ return pdev;
+
-+err_invalid_id:
-+ kfree(modedb);
-+err_dup_modedb:
-+ kfree(monspecs);
++out_free_pdev:
++ platform_device_put(pdev);
+ return NULL;
+}
+
+/* --------------------------------------------------------------------
-+ * USB Device Controller
++ * SSC
+ * -------------------------------------------------------------------- */
-+static struct resource usba0_resource[] = {
-+ {
-+ .start = 0xff300000,
-+ .end = 0xff3fffff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ PBMEM(0xfff03000),
-+ IRQ(31),
++static struct resource ssc0_resource[] = {
++ PBMEM(0xffe01c00),
++ IRQ(10),
++};
++DEFINE_DEV(ssc, 0);
++DEV_CLK(pclk, ssc0, pba, 7);
++
++static struct resource ssc1_resource[] = {
++ PBMEM(0xffe02000),
++ IRQ(11),
+};
-+DEFINE_DEV(usba, 0);
-+DEV_CLK(pclk, usba0, pbb, 12);
-+DEV_CLK(hclk, usba0, hsb, 6);
++DEFINE_DEV(ssc, 1);
++DEV_CLK(pclk, ssc1, pba, 8);
+
-+struct platform_device *__init at32_add_device_usba(unsigned int id)
++static struct resource ssc2_resource[] = {
++ PBMEM(0xffe02400),
++ IRQ(12),
++};
++DEFINE_DEV(ssc, 2);
++DEV_CLK(pclk, ssc2, pba, 9);
++
++struct platform_device *__init
++at32_add_device_ssc(unsigned int id, unsigned int flags)
+{
+ struct platform_device *pdev;
+
+ switch (id) {
+ case 0:
-+ pdev = &usba0_device;
-+ /* USB pads are not multiplexed */
- break;
++ pdev = &ssc0_device;
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PA(21), PERIPH_A, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PA(22), PERIPH_A, 0); /* RK */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PA(23), PERIPH_A, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PA(24), PERIPH_A, 0); /* TF */
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PA(25), PERIPH_A, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PA(26), PERIPH_A, 0); /* RD */
++ break;
++ case 1:
++ pdev = &ssc1_device;
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PA(0), PERIPH_B, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PA(1), PERIPH_B, 0); /* RK */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PA(2), PERIPH_B, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PA(3), PERIPH_B, 0); /* TF */
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PA(4), PERIPH_B, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PA(5), PERIPH_B, 0); /* RD */
++ break;
++ case 2:
++ pdev = &ssc2_device;
++ if (flags & ATMEL_SSC_TD)
++ select_peripheral(PB(13), PERIPH_A, 0); /* TD */
++ if (flags & ATMEL_SSC_RD)
++ select_peripheral(PB(14), PERIPH_A, 0); /* RD */
++ if (flags & ATMEL_SSC_TK)
++ select_peripheral(PB(15), PERIPH_A, 0); /* TK */
++ if (flags & ATMEL_SSC_TF)
++ select_peripheral(PB(16), PERIPH_A, 0); /* TF */
++ if (flags & ATMEL_SSC_RF)
++ select_peripheral(PB(17), PERIPH_A, 0); /* RF */
++ if (flags & ATMEL_SSC_RK)
++ select_peripheral(PB(18), PERIPH_A, 0); /* RK */
++ break;
+ default:
+ return NULL;
+ }
@@ -3738,7 +1976,7 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/at32ap7000
+};
+DEFINE_DEV(atmel_ac97c, 0);
+DEV_CLK(pclk, atmel_ac97c0, pbb, 10);
-
++
+struct platform_device *__init
+at32_add_device_ac97c(unsigned int id)
+{
@@ -3752,12 +1990,10 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/at32ap7000
+ select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
+ select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
+ break;
- default:
- return NULL;
- }
-
-- memcpy(pdev->dev.platform_data, data,
-- sizeof(struct lcdc_platform_data));
++ default:
++ return NULL;
++ }
++
+ platform_device_register(pdev);
+ return pdev;
+}
@@ -3797,17 +2033,25 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/at32ap7000
+ default:
+ return NULL;
+ }
-
- platform_device_register(pdev);
- return pdev;
-@@ -950,18 +1249,21 @@
++
++ platform_device_register(pdev);
++ return pdev;
++}
++
++/* --------------------------------------------------------------------
+ * GCLK
+ * -------------------------------------------------------------------- */
+ static struct clk gclk0 = {
+@@ -1066,7 +1449,7 @@
+ &hsb_clk,
+ &pba_clk,
&pbb_clk,
- &at32_sm_pclk,
+- &at32_sm_pclk,
++ &at32_pm_pclk,
&at32_intc0_pclk,
-+ &hmatrix_clk,
+ &hmatrix_clk,
&ebi_clk,
- &hramc_clk,
- &smc0_pclk,
+@@ -1075,6 +1458,7 @@
&smc0_mck,
&pdc_hclk,
&pdc_pclk,
@@ -3815,569 +2059,1577 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/at32ap7000
&pico_clk,
&pio0_mck,
&pio1_mck,
- &pio2_mck,
- &pio3_mck,
- &pio4_mck,
-+ &at32_systc0_pclk,
- &atmel_usart0_usart,
- &atmel_usart1_usart,
- &atmel_usart2_usart,
-@@ -972,8 +1274,15 @@
+@@ -1092,8 +1476,18 @@
&macb1_pclk,
&atmel_spi0_spi_clk,
&atmel_spi1_spi_clk,
-- &lcdc0_hclk,
-- &lcdc0_pixclk,
+ &atmel_twi0_pclk,
+ &atmel_mci0_mci_clk,
-+ &atmel_lcdfb0_hck1,
-+ &atmel_lcdfb0_pixclk,
+ &atmel_lcdfb0_hck1,
+ &atmel_lcdfb0_pixclk,
+ &usba0_pclk,
+ &usba0_hclk,
++ &ssc0_pclk,
++ &ssc1_pclk,
++ &ssc2_pclk,
+ &atmel_ac97c0_pclk,
+ &abdac0_pclk,
+ &abdac0_sample_clk,
&gclk0,
&gclk1,
&gclk2,
-@@ -1012,7 +1321,8 @@
- genclk_init_parent(&gclk2);
+@@ -1113,18 +1507,20 @@
+
+ void __init at32_clock_init(void)
+ {
+- struct at32_sm *sm = &system_manager;
+ u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
+ int i;
+
+- if (sm_readl(sm, PM_MCCTRL) & SM_BIT(PLLSEL))
++ if (pm_readl(MCCTRL) & PM_BIT(PLLSEL)) {
+ main_clock = &pll0;
+- else
++ cpu_clk.parent = &pll0;
++ } else {
+ main_clock = &osc0;
++ cpu_clk.parent = &osc0;
++ }
+
+- if (sm_readl(sm, PM_PLL0) & SM_BIT(PLLOSC))
++ if (pm_readl(PLL0) & PM_BIT(PLLOSC))
+ pll0.parent = &osc1;
+- if (sm_readl(sm, PM_PLL1) & SM_BIT(PLLOSC))
++ if (pm_readl(PLL1) & PM_BIT(PLLOSC))
+ pll1.parent = &osc1;
+
+ genclk_init_parent(&gclk0);
+@@ -1133,6 +1529,7 @@
genclk_init_parent(&gclk3);
genclk_init_parent(&gclk4);
-- genclk_init_parent(&lcdc0_pixclk);
-+ genclk_init_parent(&atmel_lcdfb0_pixclk);
+ genclk_init_parent(&atmel_lcdfb0_pixclk);
+ genclk_init_parent(&abdac0_sample_clk);
/*
* Turn on all clocks that have at least one user already, and
-@@ -1024,6 +1334,9 @@
- for (i = 0; i < ARRAY_SIZE(at32_clock_list); i++) {
- struct clk *clk = at32_clock_list[i];
-
-+ if (clk->users == 0)
-+ continue;
-+
- if (clk->mode == &cpu_clk_mode)
- cpu_mask |= 1 << clk->index;
- else if (clk->mode == &hsb_clk_mode)
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/clock.c avr32-git/arch/avr32/mach-at32ap/clock.c
---- linux-2.6.21.3/arch/avr32/mach-at32ap/clock.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/mach-at32ap/clock.c 2007-06-06 11:33:46.000000000 +0200
-@@ -18,7 +18,7 @@
+@@ -1157,8 +1554,8 @@
+ pbb_mask |= 1 << clk->index;
+ }
- #include "clock.h"
+- sm_writel(sm, PM_CPU_MASK, cpu_mask);
+- sm_writel(sm, PM_HSB_MASK, hsb_mask);
+- sm_writel(sm, PM_PBA_MASK, pba_mask);
+- sm_writel(sm, PM_PBB_MASK, pbb_mask);
++ pm_writel(CPU_MASK, cpu_mask);
++ pm_writel(HSB_MASK, hsb_mask);
++ pm_writel(PBA_MASK, pba_mask);
++ pm_writel(PBB_MASK, pbb_mask);
+ }
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap.c linux-avr32.git/arch/avr32/mach-at32ap/at32ap.c
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/at32ap.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/mach-at32ap/at32ap.c 2007-07-12 13:59:49.000000000 +0200
+@@ -11,41 +11,10 @@
+ #include <linux/init.h>
+ #include <linux/platform_device.h>
--static spinlock_t clk_lock = SPIN_LOCK_UNLOCKED;
-+static DEFINE_SPINLOCK(clk_lock);
+-#include <asm/io.h>
+-
+ #include <asm/arch/init.h>
+-#include <asm/arch/sm.h>
+-
+-struct at32_sm system_manager;
+-
+-static int __init at32_sm_init(void)
+-{
+- struct resource *regs;
+- struct at32_sm *sm = &system_manager;
+- int ret = -ENXIO;
+-
+- regs = platform_get_resource(&at32_sm_device, IORESOURCE_MEM, 0);
+- if (!regs)
+- goto fail;
+-
+- spin_lock_init(&sm->lock);
+- sm->pdev = &at32_sm_device;
+-
+- ret = -ENOMEM;
+- sm->regs = ioremap(regs->start, regs->end - regs->start + 1);
+- if (!sm->regs)
+- goto fail;
+-
+- return 0;
+-
+-fail:
+- printk(KERN_ERR "Failed to initialize System Manager: %d\n", ret);
+- return ret;
+-}
- struct clk *clk_get(struct device *dev, const char *id)
+ void __init setup_platform(void)
{
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/hmatrix.h avr32-git/arch/avr32/mach-at32ap/hmatrix.h
---- linux-2.6.21.3/arch/avr32/mach-at32ap/hmatrix.h 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/arch/avr32/mach-at32ap/hmatrix.h 2007-06-06 11:33:46.000000000 +0200
-@@ -0,0 +1,182 @@
+- at32_sm_init();
+ at32_clock_init();
+ at32_portmux_init();
+ }
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/cpufreq.c linux-avr32.git/arch/avr32/mach-at32ap/cpufreq.c
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/cpufreq.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/arch/avr32/mach-at32ap/cpufreq.c 2007-07-12 13:59:49.000000000 +0200
+@@ -0,0 +1,112 @@
+/*
-+ * Register definitions for High-Speed Bus Matrix
++ * Copyright (C) 2004-2007 Atmel Corporation
++ *
++ * Based on MIPS implementation arch/mips/kernel/time.c
++ * Copyright 2001 MontaVista Software Inc.
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
+ */
-+#ifndef __HMATRIX_H
-+#define __HMATRIX_H
-+
-+/* HMATRIX register offsets */
-+#define HMATRIX_MCFG0 0x0000
-+#define HMATRIX_MCFG1 0x0004
-+#define HMATRIX_MCFG2 0x0008
-+#define HMATRIX_MCFG3 0x000c
-+#define HMATRIX_MCFG4 0x0010
-+#define HMATRIX_MCFG5 0x0014
-+#define HMATRIX_MCFG6 0x0018
-+#define HMATRIX_MCFG7 0x001c
-+#define HMATRIX_MCFG8 0x0020
-+#define HMATRIX_MCFG9 0x0024
-+#define HMATRIX_MCFG10 0x0028
-+#define HMATRIX_MCFG11 0x002c
-+#define HMATRIX_MCFG12 0x0030
-+#define HMATRIX_MCFG13 0x0034
-+#define HMATRIX_MCFG14 0x0038
-+#define HMATRIX_MCFG15 0x003c
-+#define HMATRIX_SCFG0 0x0040
-+#define HMATRIX_SCFG1 0x0044
-+#define HMATRIX_SCFG2 0x0048
-+#define HMATRIX_SCFG3 0x004c
-+#define HMATRIX_SCFG4 0x0050
-+#define HMATRIX_SCFG5 0x0054
-+#define HMATRIX_SCFG6 0x0058
-+#define HMATRIX_SCFG7 0x005c
-+#define HMATRIX_SCFG8 0x0060
-+#define HMATRIX_SCFG9 0x0064
-+#define HMATRIX_SCFG10 0x0068
-+#define HMATRIX_SCFG11 0x006c
-+#define HMATRIX_SCFG12 0x0070
-+#define HMATRIX_SCFG13 0x0074
-+#define HMATRIX_SCFG14 0x0078
-+#define HMATRIX_SCFG15 0x007c
-+#define HMATRIX_PRAS0 0x0080
-+#define HMATRIX_PRBS0 0x0084
-+#define HMATRIX_PRAS1 0x0088
-+#define HMATRIX_PRBS1 0x008c
-+#define HMATRIX_PRAS2 0x0090
-+#define HMATRIX_PRBS2 0x0094
-+#define HMATRIX_PRAS3 0x0098
-+#define HMATRIX_PRBS3 0x009c
-+#define HMATRIX_PRAS4 0x00a0
-+#define HMATRIX_PRBS4 0x00a4
-+#define HMATRIX_PRAS5 0x00a8
-+#define HMATRIX_PRBS5 0x00ac
-+#define HMATRIX_PRAS6 0x00b0
-+#define HMATRIX_PRBS6 0x00b4
-+#define HMATRIX_PRAS7 0x00b8
-+#define HMATRIX_PRBS7 0x00bc
-+#define HMATRIX_PRAS8 0x00c0
-+#define HMATRIX_PRBS8 0x00c4
-+#define HMATRIX_PRAS9 0x00c8
-+#define HMATRIX_PRBS9 0x00cc
-+#define HMATRIX_PRAS10 0x00d0
-+#define HMATRIX_PRBS10 0x00d4
-+#define HMATRIX_PRAS11 0x00d8
-+#define HMATRIX_PRBS11 0x00dc
-+#define HMATRIX_PRAS12 0x00e0
-+#define HMATRIX_PRBS12 0x00e4
-+#define HMATRIX_PRAS13 0x00e8
-+#define HMATRIX_PRBS13 0x00ec
-+#define HMATRIX_PRAS14 0x00f0
-+#define HMATRIX_PRBS14 0x00f4
-+#define HMATRIX_PRAS15 0x00f8
-+#define HMATRIX_PRBS15 0x00fc
-+#define HMATRIX_MRCR 0x0100
-+#define HMATRIX_SFR0 0x0110
-+#define HMATRIX_SFR1 0x0114
-+#define HMATRIX_SFR2 0x0118
-+#define HMATRIX_SFR3 0x011c
-+#define HMATRIX_SFR4 0x0120
-+#define HMATRIX_SFR5 0x0124
-+#define HMATRIX_SFR6 0x0128
-+#define HMATRIX_SFR7 0x012c
-+#define HMATRIX_SFR8 0x0130
-+#define HMATRIX_SFR9 0x0134
-+#define HMATRIX_SFR10 0x0138
-+#define HMATRIX_SFR11 0x013c
-+#define HMATRIX_SFR12 0x0140
-+#define HMATRIX_SFR13 0x0144
-+#define HMATRIX_SFR14 0x0148
-+#define HMATRIX_SFR15 0x014c
-+
-+/* Bitfields in MCFGx */
-+#define HMATRIX_ULBT_OFFSET 0
-+#define HMATRIX_ULBT_SIZE 3
-+
-+/* Bitfields in SCFGx */
-+#define HMATRIX_SLOT_CYCLE_OFFSET 0
-+#define HMATRIX_SLOT_CYCLE_SIZE 8
-+#define HMATRIX_DEFMSTR_TYPE_OFFSET 16
-+#define HMATRIX_DEFMSTR_TYPE_SIZE 2
-+#define HMATRIX_FIXED_DEFMSTR_OFFSET 18
-+#define HMATRIX_FIXED_DEFMSTR_SIZE 4
-+#define HMATRIX_ARBT_OFFSET 24
-+#define HMATRIX_ARBT_SIZE 2
-+
-+/* Bitfields in PRASx */
-+#define HMATRIX_M0PR_OFFSET 0
-+#define HMATRIX_M0PR_SIZE 4
-+#define HMATRIX_M1PR_OFFSET 4
-+#define HMATRIX_M1PR_SIZE 4
-+#define HMATRIX_M2PR_OFFSET 8
-+#define HMATRIX_M2PR_SIZE 4
-+#define HMATRIX_M3PR_OFFSET 12
-+#define HMATRIX_M3PR_SIZE 4
-+#define HMATRIX_M4PR_OFFSET 16
-+#define HMATRIX_M4PR_SIZE 4
-+#define HMATRIX_M5PR_OFFSET 20
-+#define HMATRIX_M5PR_SIZE 4
-+#define HMATRIX_M6PR_OFFSET 24
-+#define HMATRIX_M6PR_SIZE 4
-+#define HMATRIX_M7PR_OFFSET 28
-+#define HMATRIX_M7PR_SIZE 4
-+
-+/* Bitfields in PRBSx */
-+#define HMATRIX_M8PR_OFFSET 0
-+#define HMATRIX_M8PR_SIZE 4
-+#define HMATRIX_M9PR_OFFSET 4
-+#define HMATRIX_M9PR_SIZE 4
-+#define HMATRIX_M10PR_OFFSET 8
-+#define HMATRIX_M10PR_SIZE 4
-+#define HMATRIX_M11PR_OFFSET 12
-+#define HMATRIX_M11PR_SIZE 4
-+#define HMATRIX_M12PR_OFFSET 16
-+#define HMATRIX_M12PR_SIZE 4
-+#define HMATRIX_M13PR_OFFSET 20
-+#define HMATRIX_M13PR_SIZE 4
-+#define HMATRIX_M14PR_OFFSET 24
-+#define HMATRIX_M14PR_SIZE 4
-+#define HMATRIX_M15PR_OFFSET 28
-+#define HMATRIX_M15PR_SIZE 4
-+
-+/* Bitfields in SFR4 */
-+#define HMATRIX_CS1A_OFFSET 1
-+#define HMATRIX_CS1A_SIZE 1
-+#define HMATRIX_CS3A_OFFSET 3
-+#define HMATRIX_CS3A_SIZE 1
-+#define HMATRIX_CS4A_OFFSET 4
-+#define HMATRIX_CS4A_SIZE 1
-+#define HMATRIX_CS5A_OFFSET 5
-+#define HMATRIX_CS5A_SIZE 1
-+#define HMATRIX_DBPUC_OFFSET 8
-+#define HMATRIX_DBPUC_SIZE 1
-+
-+/* Constants for ULBT */
-+#define HMATRIX_ULBT_INFINITE 0
-+#define HMATRIX_ULBT_SINGLE 1
-+#define HMATRIX_ULBT_FOUR_BEAT 2
-+#define HMATRIX_ULBT_EIGHT_BEAT 3
-+#define HMATRIX_ULBT_SIXTEEN_BEAT 4
-+
-+/* Constants for DEFMSTR_TYPE */
-+#define HMATRIX_DEFMSTR_TYPE_NO_DEFAULT 0
-+#define HMATRIX_DEFMSTR_TYPE_LAST_DEFAULT 1
-+#define HMATRIX_DEFMSTR_TYPE_FIXED_DEFAULT 2
-+
-+/* Constants for ARBT */
-+#define HMATRIX_ARBT_ROUND_ROBIN 0
-+#define HMATRIX_ARBT_FIXED_PRIORITY 1
+
-+/* Bit manipulation macros */
-+#define HMATRIX_BIT(name) \
-+ (1 << HMATRIX_##name##_OFFSET)
-+#define HMATRIX_BF(name,value) \
-+ (((value) & ((1 << HMATRIX_##name##_SIZE) - 1)) \
-+ << HMATRIX_##name##_OFFSET)
-+#define HMATRIX_BFEXT(name,value) \
-+ (((value) >> HMATRIX_##name##_OFFSET) \
-+ & ((1 << HMATRIX_##name##_SIZE) - 1))
-+#define HMATRIX_BFINS(name,value,old) \
-+ (((old) & ~(((1 << HMATRIX_##name##_SIZE) - 1) \
-+ << HMATRIX_##name##_OFFSET)) \
-+ | HMATRIX_BF(name,value))
-+
-+#endif /* __HMATRIX_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/hsmc.c avr32-git/arch/avr32/mach-at32ap/hsmc.c
---- linux-2.6.21.3/arch/avr32/mach-at32ap/hsmc.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/mach-at32ap/hsmc.c 2007-06-06 11:33:46.000000000 +0200
-@@ -75,12 +75,35 @@
- return -EINVAL;
- }
-
-+ switch (config->nwait_mode) {
-+ case 0:
-+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_DISABLED);
-+ break;
-+ case 1:
-+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_RESERVED);
-+ break;
-+ case 2:
-+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_FROZEN);
-+ break;
-+ case 3:
-+ mode |= HSMC_BF(EXNW_MODE, HSMC_EXNW_MODE_READY);
-+ break;
-+ default:
++/*#define DEBUG*/
++
++#include <linux/kernel.h>
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/cpufreq.h>
++#include <linux/io.h>
++#include <linux/clk.h>
++#include <linux/err.h>
++#include <asm/system.h>
++
++static struct clk *cpuclk;
++
++static int at32_verify_speed(struct cpufreq_policy *policy)
++{
++ if (policy->cpu != 0)
+ return -EINVAL;
-+ }
+
-+ if (config->tdf_cycles) {
-+ mode |= HSMC_BF(TDF_CYCLES, config->tdf_cycles);
++ cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
++ policy->cpuinfo.max_freq);
++ return 0;
++}
++
++static unsigned int at32_get_speed(unsigned int cpu)
++{
++ /* No SMP support */
++ if (cpu)
++ return 0;
++ return (unsigned int)((clk_get_rate(cpuclk) + 500) / 1000);
++}
++
++static int at32_set_target(struct cpufreq_policy *policy,
++ unsigned int target_freq,
++ unsigned int relation)
++{
++ struct cpufreq_freqs freqs;
++ long freq;
++
++ /* Convert target_freq from kHz to Hz */
++ freq = clk_round_rate(cpuclk, target_freq * 1000);
++
++ /* Check if policy->min <= new_freq <= policy->max */
++ if(freq < (policy->min * 1000) || freq > (policy->max * 1000))
++ return -EINVAL;
++
++ pr_debug("cpufreq: requested frequency %u Hz\n", target_freq * 1000);
++
++ freqs.old = at32_get_speed(0);
++ freqs.new = (freq + 500) / 1000;
++ freqs.cpu = 0;
++ freqs.flags = 0;
++
++ cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
++ clk_set_rate(cpuclk, freq);
++ cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
++
++ pr_debug("cpufreq: set frequency %lu Hz\n", freq);
++
++ return 0;
++}
++
++static int __init at32_cpufreq_driver_init(struct cpufreq_policy *policy)
++{
++ if (policy->cpu != 0)
++ return -EINVAL;
++
++ cpuclk = clk_get(NULL, "cpu");
++ if (IS_ERR(cpuclk)) {
++ pr_debug("cpufreq: could not get CPU clk\n");
++ return PTR_ERR(cpuclk);
+ }
+
- if (config->nrd_controlled)
- mode |= HSMC_BIT(READ_MODE);
- if (config->nwe_controlled)
- mode |= HSMC_BIT(WRITE_MODE);
- if (config->byte_write)
- mode |= HSMC_BIT(BAT);
-+ if (config->tdf_mode)
-+ mode |= HSMC_BIT(TDF_MODE);
-
- pr_debug("smc cs%d: setup/%08x pulse/%08x cycle/%08x mode/%08x\n",
- cs, setup, pulse, cycle, mode);
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/Kconfig avr32-git/arch/avr32/mach-at32ap/Kconfig
---- linux-2.6.21.3/arch/avr32/mach-at32ap/Kconfig 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/arch/avr32/mach-at32ap/Kconfig 2007-06-06 11:33:46.000000000 +0200
-@@ -0,0 +1,31 @@
-+if PLATFORM_AT32AP
++ policy->cpuinfo.min_freq = (clk_round_rate(cpuclk, 1) + 500) / 1000;
++ policy->cpuinfo.max_freq = (clk_round_rate(cpuclk, ~0UL) + 500) / 1000;
++ policy->cpuinfo.transition_latency = 0;
++ policy->cur = at32_get_speed(0);
++ policy->min = policy->cpuinfo.min_freq;
++ policy->max = policy->cpuinfo.max_freq;
++ policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+
-+menu "Atmel AVR32 AP options"
++ printk("cpufreq: AT32AP CPU frequency driver\n");
+
-+choice
-+ prompt "AT32AP7000 static memory bus width"
-+ depends on CPU_AT32AP7000
-+ default AP7000_16_BIT_SMC
-+ help
-+ Define the width of the AP7000 external static memory interface.
-+ This is used to determine how to mangle the address and/or data
-+ when doing little-endian port access.
++ return 0;
++}
+
-+ The current code can only support a single external memory bus
-+ width for all chip selects, excluding the flash (which is using
-+ raw access and is thus not affected by any of this.)
++static struct cpufreq_driver at32_driver = {
++ .name = "at32ap",
++ .owner = THIS_MODULE,
++ .init = at32_cpufreq_driver_init,
++ .verify = at32_verify_speed,
++ .target = at32_set_target,
++ .get = at32_get_speed,
++ .flags = CPUFREQ_STICKY,
++};
+
-+config AP7000_32_BIT_SMC
-+ bool "32 bit"
++static int __init at32_cpufreq_init(void)
++{
++ return cpufreq_register_driver(&at32_driver);
++}
+
-+config AP7000_16_BIT_SMC
-+ bool "16 bit"
++arch_initcall(at32_cpufreq_init);
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/extint.c linux-avr32.git/arch/avr32/mach-at32ap/extint.c
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/extint.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/mach-at32ap/extint.c 2007-07-12 13:59:49.000000000 +0200
+@@ -17,42 +17,83 @@
+
+ #include <asm/io.h>
+
+-#include <asm/arch/sm.h>
+-
+-#include "sm.h"
++/* EIC register offsets */
++#define EIC_IER 0x0000
++#define EIC_IDR 0x0004
++#define EIC_IMR 0x0008
++#define EIC_ISR 0x000c
++#define EIC_ICR 0x0010
++#define EIC_MODE 0x0014
++#define EIC_EDGE 0x0018
++#define EIC_LEVEL 0x001c
++#define EIC_TEST 0x0020
++#define EIC_NMIC 0x0024
++
++/* Bitfields in TEST */
++#define EIC_TESTEN_OFFSET 31
++#define EIC_TESTEN_SIZE 1
++
++/* Bitfields in NMIC */
++#define EIC_EN_OFFSET 0
++#define EIC_EN_SIZE 1
+
-+config AP7000_8_BIT_SMC
-+ bool "8 bit"
++/* Bit manipulation macros */
++#define EIC_BIT(name) \
++ (1 << EIC_##name##_OFFSET)
++#define EIC_BF(name,value) \
++ (((value) & ((1 << EIC_##name##_SIZE) - 1)) \
++ << EIC_##name##_OFFSET)
++#define EIC_BFEXT(name,value) \
++ (((value) >> EIC_##name##_OFFSET) \
++ & ((1 << EIC_##name##_SIZE) - 1))
++#define EIC_BFINS(name,value,old) \
++ (((old) & ~(((1 << EIC_##name##_SIZE) - 1) \
++ << EIC_##name##_OFFSET)) \
++ | EIC_BF(name,value))
+
-+endchoice
++/* Register access macros */
++#define eic_readl(port,reg) \
++ __raw_readl((port)->regs + EIC_##reg)
++#define eic_writel(port,reg,value) \
++ __raw_writel((value), (port)->regs + EIC_##reg)
+
-+endmenu
++struct eic {
++ void __iomem *regs;
++ struct irq_chip *chip;
++ unsigned int first_irq;
++};
+
+-static void eim_ack_irq(unsigned int irq)
++static void eic_ack_irq(unsigned int irq)
+ {
+- struct at32_sm *sm = get_irq_chip_data(irq);
+- sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
++ struct eic *eic = get_irq_chip_data(irq);
++ eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
+ }
+
+-static void eim_mask_irq(unsigned int irq)
++static void eic_mask_irq(unsigned int irq)
+ {
+- struct at32_sm *sm = get_irq_chip_data(irq);
+- sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
++ struct eic *eic = get_irq_chip_data(irq);
++ eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
+ }
+
+-static void eim_mask_ack_irq(unsigned int irq)
++static void eic_mask_ack_irq(unsigned int irq)
+ {
+- struct at32_sm *sm = get_irq_chip_data(irq);
+- sm_writel(sm, EIM_ICR, 1 << (irq - sm->eim_first_irq));
+- sm_writel(sm, EIM_IDR, 1 << (irq - sm->eim_first_irq));
++ struct eic *eic = get_irq_chip_data(irq);
++ eic_writel(eic, ICR, 1 << (irq - eic->first_irq));
++ eic_writel(eic, IDR, 1 << (irq - eic->first_irq));
+ }
+
+-static void eim_unmask_irq(unsigned int irq)
++static void eic_unmask_irq(unsigned int irq)
+ {
+- struct at32_sm *sm = get_irq_chip_data(irq);
+- sm_writel(sm, EIM_IER, 1 << (irq - sm->eim_first_irq));
++ struct eic *eic = get_irq_chip_data(irq);
++ eic_writel(eic, IER, 1 << (irq - eic->first_irq));
+ }
+
+-static int eim_set_irq_type(unsigned int irq, unsigned int flow_type)
++static int eic_set_irq_type(unsigned int irq, unsigned int flow_type)
+ {
+- struct at32_sm *sm = get_irq_chip_data(irq);
++ struct eic *eic = get_irq_chip_data(irq);
+ struct irq_desc *desc;
+- unsigned int i = irq - sm->eim_first_irq;
++ unsigned int i = irq - eic->first_irq;
+ u32 mode, edge, level;
+- unsigned long flags;
+ int ret = 0;
+
+ flow_type &= IRQ_TYPE_SENSE_MASK;
+@@ -60,11 +101,10 @@
+ flow_type = IRQ_TYPE_LEVEL_LOW;
+
+ desc = &irq_desc[irq];
+- spin_lock_irqsave(&sm->lock, flags);
+
+- mode = sm_readl(sm, EIM_MODE);
+- edge = sm_readl(sm, EIM_EDGE);
+- level = sm_readl(sm, EIM_LEVEL);
++ mode = eic_readl(eic, MODE);
++ edge = eic_readl(eic, EDGE);
++ level = eic_readl(eic, LEVEL);
+
+ switch (flow_type) {
+ case IRQ_TYPE_LEVEL_LOW:
+@@ -89,9 +129,9 @@
+ }
+
+ if (ret == 0) {
+- sm_writel(sm, EIM_MODE, mode);
+- sm_writel(sm, EIM_EDGE, edge);
+- sm_writel(sm, EIM_LEVEL, level);
++ eic_writel(eic, MODE, mode);
++ eic_writel(eic, EDGE, edge);
++ eic_writel(eic, LEVEL, level);
+
+ if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH))
+ flow_type |= IRQ_LEVEL;
+@@ -99,35 +139,33 @@
+ desc->status |= flow_type;
+ }
+
+- spin_unlock_irqrestore(&sm->lock, flags);
+-
+ return ret;
+ }
+
+-struct irq_chip eim_chip = {
+- .name = "eim",
+- .ack = eim_ack_irq,
+- .mask = eim_mask_irq,
+- .mask_ack = eim_mask_ack_irq,
+- .unmask = eim_unmask_irq,
+- .set_type = eim_set_irq_type,
++struct irq_chip eic_chip = {
++ .name = "eic",
++ .ack = eic_ack_irq,
++ .mask = eic_mask_irq,
++ .mask_ack = eic_mask_ack_irq,
++ .unmask = eic_unmask_irq,
++ .set_type = eic_set_irq_type,
+ };
+
+-static void demux_eim_irq(unsigned int irq, struct irq_desc *desc)
++static void demux_eic_irq(unsigned int irq, struct irq_desc *desc)
+ {
+- struct at32_sm *sm = desc->handler_data;
++ struct eic *eic = desc->handler_data;
+ struct irq_desc *ext_desc;
+ unsigned long status, pending;
+ unsigned int i, ext_irq;
+
+- status = sm_readl(sm, EIM_ISR);
+- pending = status & sm_readl(sm, EIM_IMR);
++ status = eic_readl(eic, ISR);
++ pending = status & eic_readl(eic, IMR);
+
+ while (pending) {
+ i = fls(pending) - 1;
+ pending &= ~(1 << i);
+
+- ext_irq = i + sm->eim_first_irq;
++ ext_irq = i + eic->first_irq;
+ ext_desc = irq_desc + ext_irq;
+ if (ext_desc->status & IRQ_LEVEL)
+ handle_level_irq(ext_irq, ext_desc);
+@@ -136,51 +174,85 @@
+ }
+ }
+
+-static int __init eim_init(void)
++static int __init eic_probe(struct platform_device *pdev)
+ {
+- struct at32_sm *sm = &system_manager;
++ struct eic *eic;
++ struct resource *regs;
+ unsigned int i;
+ unsigned int nr_irqs;
+ unsigned int int_irq;
++ int ret;
+ u32 pattern;
+
+- /*
+- * The EIM is really the same module as SM, so register
+- * mapping, etc. has been taken care of already.
+- */
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ int_irq = platform_get_irq(pdev, 0);
++ if (!regs || !int_irq) {
++ dev_dbg(&pdev->dev, "missing regs and/or irq resource\n");
++ return -ENXIO;
++ }
+
-+endif # PLATFORM_AT32AP
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/Makefile avr32-git/arch/avr32/mach-at32ap/Makefile
---- linux-2.6.21.3/arch/avr32/mach-at32ap/Makefile 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/mach-at32ap/Makefile 2007-06-06 11:33:46.000000000 +0200
-@@ -1,2 +1,3 @@
- obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
- obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
-+obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mach-at32ap/time-tc.c avr32-git/arch/avr32/mach-at32ap/time-tc.c
---- linux-2.6.21.3/arch/avr32/mach-at32ap/time-tc.c 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/arch/avr32/mach-at32ap/time-tc.c 2007-06-06 11:33:46.000000000 +0200
-@@ -0,0 +1,218 @@
++ ret = -ENOMEM;
++ eic = kzalloc(sizeof(struct eic), GFP_KERNEL);
++ if (!eic) {
++ dev_dbg(&pdev->dev, "no memory for eic structure\n");
++ goto err_kzalloc;
++ }
++
++ eic->first_irq = EIM_IRQ_BASE + 32 * pdev->id;
++ eic->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!eic->regs) {
++ dev_dbg(&pdev->dev, "failed to map regs\n");
++ goto err_ioremap;
++ }
+
+ /*
+ * Find out how many interrupt lines that are actually
+ * implemented in hardware.
+ */
+- sm_writel(sm, EIM_IDR, ~0UL);
+- sm_writel(sm, EIM_MODE, ~0UL);
+- pattern = sm_readl(sm, EIM_MODE);
++ eic_writel(eic, IDR, ~0UL);
++ eic_writel(eic, MODE, ~0UL);
++ pattern = eic_readl(eic, MODE);
+ nr_irqs = fls(pattern);
+
+ /* Trigger on falling edge unless overridden by driver */
+- sm_writel(sm, EIM_MODE, 0UL);
+- sm_writel(sm, EIM_EDGE, 0UL);
++ eic_writel(eic, MODE, 0UL);
++ eic_writel(eic, EDGE, 0UL);
+
+- sm->eim_chip = &eim_chip;
++ eic->chip = &eic_chip;
+
+ for (i = 0; i < nr_irqs; i++) {
+ /* NOTE the handler we set here is ignored by the demux */
+- set_irq_chip_and_handler(sm->eim_first_irq + i, &eim_chip,
++ set_irq_chip_and_handler(eic->first_irq + i, &eic_chip,
+ handle_level_irq);
+- set_irq_chip_data(sm->eim_first_irq + i, sm);
++ set_irq_chip_data(eic->first_irq + i, eic);
+ }
+
+- int_irq = platform_get_irq_byname(sm->pdev, "eim");
+-
+- set_irq_chained_handler(int_irq, demux_eim_irq);
+- set_irq_data(int_irq, sm);
++ set_irq_chained_handler(int_irq, demux_eic_irq);
++ set_irq_data(int_irq, eic);
+
+- printk("EIM: External Interrupt Module at 0x%p, IRQ %u\n",
+- sm->regs, int_irq);
+- printk("EIM: Handling %u external IRQs, starting with IRQ %u\n",
+- nr_irqs, sm->eim_first_irq);
++ dev_info(&pdev->dev,
++ "External Interrupt Controller at 0x%p, IRQ %u\n",
++ eic->regs, int_irq);
++ dev_info(&pdev->dev,
++ "Handling %u external IRQs, starting with IRQ %u\n",
++ nr_irqs, eic->first_irq);
+
+ return 0;
++
++err_ioremap:
++ kfree(eic);
++err_kzalloc:
++ return ret;
++}
++
++static struct platform_driver eic_driver = {
++ .driver = {
++ .name = "at32_eic",
++ },
++};
++
++static int __init eic_init(void)
++{
++ return platform_driver_probe(&eic_driver, eic_probe);
+ }
+-arch_initcall(eim_init);
++arch_initcall(eic_init);
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/gpio-dev.c linux-avr32.git/arch/avr32/mach-at32ap/gpio-dev.c
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/gpio-dev.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/arch/avr32/mach-at32ap/gpio-dev.c 2007-07-12 13:59:49.000000000 +0200
+@@ -0,0 +1,570 @@
+/*
-+ * Copyright (C) 2004-2007 Atmel Corporation
++ * GPIO /dev and configfs interface
+ *
-+ * Based on MIPS implementation arch/mips/kernel/time.c
-+ * Copyright 2001 MontaVista Software Inc.
++ * Copyright (C) 2006-2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
-+
-+#include <linux/clk.h>
-+#include <linux/clocksource.h>
-+#include <linux/time.h>
-+#include <linux/module.h>
++#include <linux/configfs.h>
++#include <linux/cdev.h>
++#include <linux/fs.h>
+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/kernel_stat.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/profile.h>
-+#include <linux/sysdev.h>
-+#include <linux/err.h>
++#include <linux/poll.h>
++#include <linux/uaccess.h>
++#include <linux/wait.h>
+
-+#include <asm/div64.h>
-+#include <asm/sysreg.h>
-+#include <asm/io.h>
-+#include <asm/sections.h>
++#include <asm/gpio.h>
++#include <asm/arch/portmux.h>
++
++#define GPIO_DEV_MAX 8
++
++static struct class *gpio_dev_class;
++static dev_t gpio_devt;
+
-+#include <asm/arch/time.h>
++struct gpio_item {
++ spinlock_t lock;
+
-+/* how many counter cycles in a jiffy? */
-+static u32 cycles_per_jiffy;
++ int enabled;
++ int initialized;
++ int port;
++ u32 pin_mask;
++ u32 oe_mask;
+
-+/* the count value for the next timer interrupt */
-+static u32 expirelo;
++ /* Pin state last time we read it (for blocking reads) */
++ u32 pin_state;
++ int changed;
+
-+/* the I/O registers of the TC module */
-+static void __iomem *ioregs;
++ wait_queue_head_t change_wq;
++ struct fasync_struct *async_queue;
+
-+cycle_t read_cycle_count(void)
++ int id;
++ struct class_device *gpio_dev;
++ struct cdev char_dev;
++ struct config_item item;
++};
++
++struct gpio_attribute {
++ struct configfs_attribute attr;
++ ssize_t (*show)(struct gpio_item *, char *);
++ ssize_t (*store)(struct gpio_item *, const char *, size_t);
++};
++
++static irqreturn_t gpio_dev_interrupt(int irq, void *dev_id)
+{
-+ return (cycle_t)timer_read(ioregs, 0, CV);
++ struct gpio_item *gpio = dev_id;
++ u32 old_state, new_state;
++
++ old_state = gpio->pin_state;
++ new_state = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
++ gpio->pin_state = new_state;
++
++ if (new_state != old_state) {
++ gpio->changed = 1;
++ wake_up_interruptible(&gpio->change_wq);
++
++ if (gpio->async_queue)
++ kill_fasync(&gpio->async_queue, SIGIO, POLL_IN);
++ }
++
++ return IRQ_HANDLED;
+}
+
-+struct clocksource clocksource_avr32 = {
-+ .name = "avr32",
-+ .rating = 342,
-+ .read = read_cycle_count,
-+ .mask = CLOCKSOURCE_MASK(16),
-+ .shift = 16,
-+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
-+};
++static int gpio_dev_open(struct inode *inode, struct file *file)
++{
++ struct gpio_item *gpio = container_of(inode->i_cdev,
++ struct gpio_item,
++ char_dev);
++ unsigned int irq;
++ unsigned int i;
++ int ret;
++
++ nonseekable_open(inode, file);
++ config_item_get(&gpio->item);
++ file->private_data = gpio;
++
++ gpio->pin_state = at32_gpio_get_value_multiple(gpio->port,
++ gpio->pin_mask);
++ gpio->changed = 1;
++
++ for (i = 0; i < 32; i++) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ ret = request_irq(irq, gpio_dev_interrupt, 0,
++ "gpio-dev", gpio);
++ if (ret)
++ goto err_irq;
++ }
++ }
+
-+static void avr32_timer_ack(void)
++ return 0;
++
++err_irq:
++ while (i--) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ free_irq(irq, gpio);
++ }
++ }
++
++ config_item_put(&gpio->item);
++
++ return ret;
++}
++
++static int gpio_dev_fasync(int fd, struct file *file, int mode)
+{
-+ u16 count = expirelo;
++ struct gpio_item *gpio = file->private_data;
++
++ return fasync_helper(fd, file, mode, &gpio->async_queue);
++}
++
++static int gpio_dev_release(struct inode *inode, struct file *file)
++{
++ struct gpio_item *gpio = file->private_data;
++ unsigned int irq;
++ unsigned int i;
+
-+ /* Ack this timer interrupt and set the next one, use a u16
-+ * variable so it will wrap around correctly */
-+ count += cycles_per_jiffy;
-+ expirelo = count;
-+ timer_write(ioregs, 0, RC, expirelo);
++ gpio_dev_fasync(-1, file, 0);
+
-+ /* Check to see if we have missed any timer interrupts */
-+ count = timer_read(ioregs, 0, CV);
-+ if ((count - expirelo) < 0x7fff) {
-+ expirelo = count + cycles_per_jiffy;
-+ timer_write(ioregs, 0, RC, expirelo);
++ for (i = 0; i < 32; i++) {
++ if (gpio->pin_mask & (1 << i)) {
++ irq = gpio_to_irq(32 * gpio->port + i);
++ free_irq(irq, gpio);
++ }
+ }
++
++ config_item_put(&gpio->item);
++
++ return 0;
+}
+
-+u32 avr32_hpt_read(void)
++static unsigned int gpio_dev_poll(struct file *file, poll_table *wait)
+{
-+ return timer_read(ioregs, 0, CV);
++ struct gpio_item *gpio = file->private_data;
++ unsigned int mask = 0;
++
++ poll_wait(file, &gpio->change_wq, wait);
++ if (gpio->changed)
++ mask |= POLLIN | POLLRDNORM;
++
++ return mask;
+}
+
-+static int avr32_timer_calc_div_and_set_jiffies(struct clk *pclk)
++static ssize_t gpio_dev_read(struct file *file, char __user *buf,
++ size_t count, loff_t *offset)
+{
-+ unsigned int cycles_max = (clocksource_avr32.mask + 1) / 2;
-+ unsigned int divs[] = { 4, 8, 16, 32 };
-+ int divs_size = sizeof(divs) / sizeof(*divs);
-+ int i = 0;
-+ unsigned long count_hz;
-+ unsigned long shift;
-+ unsigned long mult;
-+ int clock_div = -1;
-+ u64 tmp;
++ struct gpio_item *gpio = file->private_data;
++ u32 value;
+
-+ shift = clocksource_avr32.shift;
++ spin_lock_irq(&gpio->lock);
++ while (!gpio->changed) {
++ spin_unlock_irq(&gpio->lock);
+
-+ do {
-+ count_hz = clk_get_rate(pclk) / divs[i];
-+ mult = clocksource_hz2mult(count_hz, shift);
-+ clocksource_avr32.mult = mult;
++ if (file->f_flags & O_NONBLOCK)
++ return -EAGAIN;
++
++ if (wait_event_interruptible(gpio->change_wq, gpio->changed))
++ return -ERESTARTSYS;
+
-+ tmp = TICK_NSEC;
-+ tmp <<= shift;
-+ tmp += mult / 2;
-+ do_div(tmp, mult);
++ spin_lock_irq(&gpio->lock);
++ }
+
-+ cycles_per_jiffy = tmp;
-+ } while (cycles_per_jiffy > cycles_max && ++i < divs_size);
++ gpio->changed = 0;
++ value = at32_gpio_get_value_multiple(gpio->port, gpio->pin_mask);
+
-+ clock_div = i + 1;
++ spin_unlock_irq(&gpio->lock);
+
-+ if (clock_div > divs_size) {
-+ pr_debug("timer: could not calculate clock divider\n");
++ count = min(count, (size_t)4);
++ if (copy_to_user(buf, &value, count))
+ return -EFAULT;
-+ }
+
-+ /* Set the clock divider */
-+ timer_write(ioregs, 0, CMR, TIMER_BF(CMR_TCCLKS, clock_div));
++ return count;
++}
+
-+ return 0;
++static ssize_t gpio_dev_write(struct file *file, const char __user *buf,
++ size_t count, loff_t *offset)
++{
++ struct gpio_item *gpio = file->private_data;
++ u32 value = 0;
++ u32 mask = ~0UL;
++
++ count = min(count, (size_t)4);
++ if (copy_from_user(&value, buf, count))
++ return -EFAULT;
++
++ /* Assuming big endian */
++ mask <<= (4 - count) * 8;
++ mask &= gpio->pin_mask;
++
++ at32_gpio_set_value_multiple(gpio->port, value, mask);
++
++ return count;
+}
+
-+int avr32_hpt_init(unsigned int count)
++static struct file_operations gpio_dev_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .open = gpio_dev_open,
++ .release = gpio_dev_release,
++ .fasync = gpio_dev_fasync,
++ .poll = gpio_dev_poll,
++ .read = gpio_dev_read,
++ .write = gpio_dev_write,
++};
++
++static struct gpio_item *to_gpio_item(struct config_item *item)
+{
-+ struct resource *regs;
-+ struct clk *pclk;
-+ int irq = -1;
-+ int ret = 0;
++ return item ? container_of(item, struct gpio_item, item) : NULL;
++}
+
-+ ret = -ENXIO;
++static ssize_t gpio_show_gpio_id(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "%d\n", gpio->port);
++}
+
-+ irq = platform_get_irq(&at32_systc0_device, 0);
-+ if (irq < 0) {
-+ pr_debug("timer: could not get irq\n");
-+ goto out_error;
++static ssize_t gpio_store_gpio_id(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ unsigned long id;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
++
++ id = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ /* Switching PIO is not allowed when live... */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ ret = -ENXIO;
++ if (at32_gpio_port_is_valid(id)) {
++ gpio->port = id;
++ ret = count;
++ }
+ }
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static ssize_t gpio_show_pin_mask(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "0x%08x\n", gpio->pin_mask);
++}
++
++static ssize_t gpio_store_pin_mask(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ u32 new_mask;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
+
-+ pclk = clk_get(&at32_systc0_device.dev, "pclk");
-+ if (IS_ERR(pclk)) {
-+ pr_debug("timer: could not get clk: %ld\n", PTR_ERR(pclk));
-+ goto out_error;
++ new_mask = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ /* Can't update the pin mask while live. */
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ gpio->oe_mask &= new_mask;
++ gpio->pin_mask = new_mask;
++ ret = count;
+ }
-+ clk_enable(pclk);
++ spin_unlock(&gpio->lock);
+
-+ regs = platform_get_resource(&at32_systc0_device, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ pr_debug("timer: could not get resource\n");
-+ goto out_error_clk;
++ return ret;
++}
++
++static ssize_t gpio_show_oe_mask(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "0x%08x\n", gpio->oe_mask);
++}
++
++static ssize_t gpio_store_oe_mask(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ u32 mask;
++ char *p = (char *)page;
++ ssize_t ret = -EINVAL;
++
++ mask = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
++
++ spin_lock(&gpio->lock);
++ if (!gpio->enabled) {
++ gpio->oe_mask = mask & gpio->pin_mask;
++ ret = count;
+ }
++ spin_unlock(&gpio->lock);
++
++ return ret;
++}
++
++static ssize_t gpio_show_enabled(struct gpio_item *gpio, char *page)
++{
++ return sprintf(page, "%d\n", gpio->enabled);
++}
++
++static ssize_t gpio_store_enabled(struct gpio_item *gpio,
++ const char *page, size_t count)
++{
++ char *p = (char *)page;
++ int enabled;
++ int ret;
++
++ enabled = simple_strtoul(p, &p, 0);
++ if (!p || (*p && (*p != '\n')))
++ return -EINVAL;
+
-+ ioregs = ioremap(regs->start, regs->end - regs->start + 1);
-+ if (!ioregs) {
-+ pr_debug("timer: could not get ioregs\n");
-+ goto out_error_clk;
++ /* make it a boolean value */
++ enabled = !!enabled;
++
++ if (gpio->enabled == enabled)
++ /* No change; do nothing. */
++ return count;
++
++ BUG_ON(gpio->id >= GPIO_DEV_MAX);
++
++ if (!enabled) {
++ class_device_unregister(gpio->gpio_dev);
++ cdev_del(&gpio->char_dev);
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++ } else {
++ if (gpio->port < 0 || !gpio->pin_mask)
++ return -ENODEV;
+ }
+
-+ ret = avr32_timer_calc_div_and_set_jiffies(pclk);
++ /* Disallow any updates to gpio_id or pin_mask */
++ spin_lock(&gpio->lock);
++ gpio->enabled = enabled;
++ spin_unlock(&gpio->lock);
++
++ if (!enabled)
++ return count;
++
++ /* Now, try to allocate the pins */
++ ret = at32_select_gpio_pins(gpio->port, gpio->pin_mask, gpio->oe_mask);
+ if (ret)
-+ goto out_error_io;
++ goto err_alloc_pins;
+
-+ ret = setup_irq(irq, &timer_irqaction);
-+ if (ret) {
-+ pr_debug("timer: could not request irq %d: %d\n",
-+ irq, ret);
-+ goto out_error_io;
++ gpio->initialized = 1;
++
++ cdev_init(&gpio->char_dev, &gpio_dev_fops);
++ gpio->char_dev.owner = THIS_MODULE;
++ ret = cdev_add(&gpio->char_dev, MKDEV(MAJOR(gpio_devt), gpio->id), 1);
++ if (ret < 0)
++ goto err_cdev_add;
++ gpio->gpio_dev = class_device_create(gpio_dev_class, NULL,
++ MKDEV(MAJOR(gpio_devt), gpio->id),
++ NULL,
++ "gpio%d", gpio->id);
++ if (IS_ERR(gpio->gpio_dev)) {
++ printk(KERN_ERR "failed to create gpio%d\n", gpio->id);
++ ret = PTR_ERR(gpio->gpio_dev);
++ goto err_class_dev;
+ }
+
-+ expirelo = (timer_read(ioregs, 0, CV) / cycles_per_jiffy + 1)
-+ * cycles_per_jiffy;
++ printk(KERN_INFO "created gpio%d (port%d/0x%08x) as (%d:%d)\n",
++ gpio->id, gpio->port, gpio->pin_mask,
++ MAJOR(gpio->gpio_dev->devt), MINOR(gpio->gpio_dev->devt));
+
-+ /* Enable clock and interrupts on RC compare */
-+ timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_CLKEN));
-+ timer_write(ioregs, 0, IER, TIMER_BIT(IER_CPCS));
-+ /* Set cycles to first interrupt */
-+ timer_write(ioregs, 0, RC, expirelo);
++ return 0;
+
-+ printk(KERN_INFO "timer: AT32AP system timer/counter at 0x%p irq %d\n",
-+ ioregs, irq);
++err_class_dev:
++ cdev_del(&gpio->char_dev);
++err_cdev_add:
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++err_alloc_pins:
++ spin_lock(&gpio->lock);
++ gpio->enabled = 0;
++ spin_unlock(&gpio->lock);
+
-+ return 0;
++ return ret;
++}
+
-+out_error_io:
-+ iounmap(ioregs);
-+out_error_clk:
-+ clk_put(pclk);
-+out_error:
++static struct gpio_attribute gpio_item_attr_gpio_id = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "gpio_id",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_gpio_id,
++ .store = gpio_store_gpio_id,
++};
++static struct gpio_attribute gpio_item_attr_pin_mask = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "pin_mask",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_pin_mask,
++ .store = gpio_store_pin_mask,
++};
++static struct gpio_attribute gpio_item_attr_oe_mask = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "oe_mask",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_oe_mask,
++ .store = gpio_store_oe_mask,
++};
++static struct gpio_attribute gpio_item_attr_enabled = {
++ .attr = {
++ .ca_owner = THIS_MODULE,
++ .ca_name = "enabled",
++ .ca_mode = S_IRUGO | S_IWUSR,
++ },
++ .show = gpio_show_enabled,
++ .store = gpio_store_enabled,
++};
++
++static struct configfs_attribute *gpio_item_attrs[] = {
++ &gpio_item_attr_gpio_id.attr,
++ &gpio_item_attr_pin_mask.attr,
++ &gpio_item_attr_oe_mask.attr,
++ &gpio_item_attr_enabled.attr,
++ NULL,
++};
++
++static ssize_t gpio_show_attr(struct config_item *item,
++ struct configfs_attribute *attr,
++ char *page)
++{
++ struct gpio_item *gpio_item = to_gpio_item(item);
++ struct gpio_attribute *gpio_attr
++ = container_of(attr, struct gpio_attribute, attr);
++ ssize_t ret = 0;
++
++ if (gpio_attr->show)
++ ret = gpio_attr->show(gpio_item, page);
+ return ret;
+}
+
-+int avr32_hpt_start(void)
++static ssize_t gpio_store_attr(struct config_item *item,
++ struct configfs_attribute *attr,
++ const char *page, size_t count)
+{
-+ timer_write(ioregs, 0, CCR, TIMER_BIT(CCR_SWTRG));
-+ return 0;
++ struct gpio_item *gpio_item = to_gpio_item(item);
++ struct gpio_attribute *gpio_attr
++ = container_of(attr, struct gpio_attribute, attr);
++ ssize_t ret = -EINVAL;
++
++ if (gpio_attr->store)
++ ret = gpio_attr->store(gpio_item, page, count);
++ return ret;
+}
+
-+irqreturn_t timer_interrupt(int irq, void *dev_id)
++static void gpio_release(struct config_item *item)
+{
-+ unsigned int sr = timer_read(ioregs, 0, SR);
++ kfree(to_gpio_item(item));
++}
+
-+ if (sr & TIMER_BIT(SR_CPCS)) {
-+ /* ack timer interrupt and try to set next interrupt */
-+ avr32_timer_ack();
++static struct configfs_item_operations gpio_item_ops = {
++ .release = gpio_release,
++ .show_attribute = gpio_show_attr,
++ .store_attribute = gpio_store_attr,
++};
+
-+ /*
-+ * Call the generic timer interrupt handler
-+ */
-+ write_seqlock(&xtime_lock);
-+ do_timer(1);
-+ write_sequnlock(&xtime_lock);
++static struct config_item_type gpio_item_type = {
++ .ct_item_ops = &gpio_item_ops,
++ .ct_attrs = gpio_item_attrs,
++ .ct_owner = THIS_MODULE,
++};
+
-+ /*
-+ * In UP mode, we call local_timer_interrupt() to do profiling
-+ * and process accounting.
-+ *
-+ * SMP is not supported yet.
-+ */
-+ local_timer_interrupt(irq, dev_id);
++static struct config_item *gpio_make_item(struct config_group *group,
++ const char *name)
++{
++ static int next_id;
++ struct gpio_item *gpio;
+
-+ return IRQ_HANDLED;
++ if (next_id >= GPIO_DEV_MAX)
++ return NULL;
++
++ gpio = kzalloc(sizeof(struct gpio_item), GFP_KERNEL);
++ if (!gpio)
++ return NULL;
++
++ gpio->id = next_id++;
++ config_item_init_type_name(&gpio->item, name, &gpio_item_type);
++ spin_lock_init(&gpio->lock);
++ init_waitqueue_head(&gpio->change_wq);
++
++ return &gpio->item;
++}
++
++static void gpio_drop_item(struct config_group *group,
++ struct config_item *item)
++{
++ struct gpio_item *gpio = to_gpio_item(item);
++
++ spin_lock(&gpio->lock);
++ if (gpio->enabled) {
++ class_device_unregister(gpio->gpio_dev);
++ cdev_del(&gpio->char_dev);
+ }
+
-+ return IRQ_NONE;
++ if (gpio->initialized) {
++ at32_deselect_pins(gpio->port, gpio->pin_mask);
++ gpio->initialized = 0;
++ gpio->enabled = 0;
++ }
++ spin_unlock(&gpio->lock);
+}
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/Makefile avr32-git/arch/avr32/Makefile
---- linux-2.6.21.3/arch/avr32/Makefile 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/Makefile 2007-06-06 11:33:46.000000000 +0200
-@@ -16,7 +16,7 @@
- CFLAGS_MODULE += -mno-relax
- LDFLAGS_vmlinux += --relax
++
++static struct configfs_group_operations gpio_group_ops = {
++ .make_item = gpio_make_item,
++ .drop_item = gpio_drop_item,
++};
++
++static struct config_item_type gpio_group_type = {
++ .ct_group_ops = &gpio_group_ops,
++ .ct_owner = THIS_MODULE,
++};
++
++static struct configfs_subsystem gpio_subsys = {
++ .su_group = {
++ .cg_item = {
++ .ci_namebuf = "gpio",
++ .ci_type = &gpio_group_type,
++ },
++ },
++};
++
++static int __init gpio_dev_init(void)
++{
++ int err;
++
++ gpio_dev_class = class_create(THIS_MODULE, "gpio-dev");
++ if (IS_ERR(gpio_dev_class)) {
++ err = PTR_ERR(gpio_dev_class);
++ goto err_class_create;
++ }
++
++ err = alloc_chrdev_region(&gpio_devt, 0, GPIO_DEV_MAX, "gpio");
++ if (err < 0)
++ goto err_alloc_chrdev;
++
++ /* Configfs initialization */
++ config_group_init(&gpio_subsys.su_group);
++ init_MUTEX(&gpio_subsys.su_sem);
++ err = configfs_register_subsystem(&gpio_subsys);
++ if (err)
++ goto err_register_subsys;
++
++ return 0;
++
++err_register_subsys:
++ unregister_chrdev_region(gpio_devt, GPIO_DEV_MAX);
++err_alloc_chrdev:
++ class_destroy(gpio_dev_class);
++err_class_create:
++ printk(KERN_WARNING "Failed to initialize gpio /dev interface\n");
++ return err;
++}
++late_initcall(gpio_dev_init);
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/Kconfig linux-avr32.git/arch/avr32/mach-at32ap/Kconfig
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/Kconfig 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/mach-at32ap/Kconfig 2007-07-12 13:59:49.000000000 +0200
+@@ -26,6 +26,13 @@
--cpuflags-$(CONFIG_CPU_AP7000) += -mcpu=ap7000
-+cpuflags-$(CONFIG_CPU_AT32AP7000) += -mcpu=ap7000
+ endchoice
- CFLAGS += $(cpuflags-y)
- AFLAGS += $(cpuflags-y)
-@@ -27,9 +27,11 @@
- head-y += arch/avr32/kernel/head.o
- core-$(CONFIG_PLATFORM_AT32AP) += arch/avr32/mach-at32ap/
- core-$(CONFIG_BOARD_ATSTK1000) += arch/avr32/boards/atstk1000/
-+core-$(CONFIG_BOARD_ATNGW100) += arch/avr32/boards/atngw100/
++config GPIO_DEV
++ bool "GPIO /dev interface"
++ select CONFIGFS_FS
++ default n
++ help
++ Say `Y' to enable a /dev interface to the GPIO pins.
++
+ endmenu
+
+ endif # PLATFORM_AT32AP
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/Makefile linux-avr32.git/arch/avr32/mach-at32ap/Makefile
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/Makefile 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/mach-at32ap/Makefile 2007-07-12 13:59:49.000000000 +0200
+@@ -1,3 +1,5 @@
+ obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+ obj-$(CONFIG_CPU_AT32AP7000) += at32ap7000.o
+ obj-$(CONFIG_CPU_AT32AP7000) += time-tc.o
++obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
++obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/pio.c linux-avr32.git/arch/avr32/mach-at32ap/pio.c
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/pio.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/mach-at32ap/pio.c 2007-07-12 13:59:49.000000000 +0200
+@@ -158,6 +158,82 @@
+ dump_stack();
+ }
+
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port)
++{
++ return port < MAX_NR_PIO_DEVICES && pio_dev[port].regs != NULL;
++}
++
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask)
++{
++ struct pio_device *pio;
++ u32 old, new;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs || (oe_mask & ~pins));
++
++ /* Try to allocate the pins */
++ do {
++ old = pio->pinmux_mask;
++ if (old & pins)
++ return -EBUSY;
++
++ new = old | pins;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++
++ /* That went well, now configure the port */
++ pio_writel(pio, OER, oe_mask);
++ pio_writel(pio, PER, pins);
++
++ return 0;
++}
++
++void at32_deselect_pins(unsigned int port, u32 pins)
++{
++ struct pio_device *pio;
++ u32 old, new;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ /* Return to a "safe" mux configuration */
++ pio_writel(pio, PUER, pins);
++ pio_writel(pio, ODR, pins);
++
++ /* Deallocate the pins */
++ do {
++ old = pio->pinmux_mask;
++ new = old & ~pins;
++ } while (cmpxchg(&pio->pinmux_mask, old, new) != old);
++}
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins)
++{
++ struct pio_device *pio;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ return pio_readl(pio, PDSR) & pins;
++}
++
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask)
++{
++ struct pio_device *pio;
++
++ pio = &pio_dev[port];
++ BUG_ON(port > ARRAY_SIZE(pio_dev) || !pio->regs);
++
++ /* No atomic updates for now... */
++ pio_writel(pio, CODR, ~value & mask);
++ pio_writel(pio, SODR, value & mask);
++}
++
++#endif /* CONFIG_GPIO_DEV */
++
++
+ /*--------------------------------------------------------------------------*/
+
+ /* GPIO API */
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/pm.h linux-avr32.git/arch/avr32/mach-at32ap/pm.h
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/pm.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/arch/avr32/mach-at32ap/pm.h 2007-07-12 13:59:49.000000000 +0200
+@@ -0,0 +1,112 @@
++/*
++ * Register definitions for the Power Manager (PM)
++ */
++#ifndef __ARCH_AVR32_MACH_AT32AP_PM_H__
++#define __ARCH_AVR32_MACH_AT32AP_PM_H__
++
++/* PM register offsets */
++#define PM_MCCTRL 0x0000
++#define PM_CKSEL 0x0004
++#define PM_CPU_MASK 0x0008
++#define PM_HSB_MASK 0x000c
++#define PM_PBA_MASK 0x0010
++#define PM_PBB_MASK 0x0014
++#define PM_PLL0 0x0020
++#define PM_PLL1 0x0024
++#define PM_IER 0x0040
++#define PM_IDR 0x0044
++#define PM_IMR 0x0048
++#define PM_ISR 0x004c
++#define PM_ICR 0x0050
++#define PM_GCCTRL(x) (0x0060 + 4 * (x))
++#define PM_RCAUSE 0x00c0
++
++/* Bitfields in CKSEL */
++#define PM_CPUSEL_OFFSET 0
++#define PM_CPUSEL_SIZE 3
++#define PM_CPUDIV_OFFSET 7
++#define PM_CPUDIV_SIZE 1
++#define PM_HSBSEL_OFFSET 8
++#define PM_HSBSEL_SIZE 3
++#define PM_HSBDIV_OFFSET 15
++#define PM_HSBDIV_SIZE 1
++#define PM_PBASEL_OFFSET 16
++#define PM_PBASEL_SIZE 3
++#define PM_PBADIV_OFFSET 23
++#define PM_PBADIV_SIZE 1
++#define PM_PBBSEL_OFFSET 24
++#define PM_PBBSEL_SIZE 3
++#define PM_PBBDIV_OFFSET 31
++#define PM_PBBDIV_SIZE 1
++
++/* Bitfields in PLL0 */
++#define PM_PLLEN_OFFSET 0
++#define PM_PLLEN_SIZE 1
++#define PM_PLLOSC_OFFSET 1
++#define PM_PLLOSC_SIZE 1
++#define PM_PLLOPT_OFFSET 2
++#define PM_PLLOPT_SIZE 3
++#define PM_PLLDIV_OFFSET 8
++#define PM_PLLDIV_SIZE 8
++#define PM_PLLMUL_OFFSET 16
++#define PM_PLLMUL_SIZE 8
++#define PM_PLLCOUNT_OFFSET 24
++#define PM_PLLCOUNT_SIZE 6
++#define PM_PLLTEST_OFFSET 31
++#define PM_PLLTEST_SIZE 1
++
++/* Bitfields in ICR */
++#define PM_LOCK0_OFFSET 0
++#define PM_LOCK0_SIZE 1
++#define PM_LOCK1_OFFSET 1
++#define PM_LOCK1_SIZE 1
++#define PM_WAKE_OFFSET 2
++#define PM_WAKE_SIZE 1
++#define PM_CKRDY_OFFSET 5
++#define PM_CKRDY_SIZE 1
++#define PM_MSKRDY_OFFSET 6
++#define PM_MSKRDY_SIZE 1
++
++/* Bitfields in GCCTRL0 */
++#define PM_OSCSEL_OFFSET 0
++#define PM_OSCSEL_SIZE 1
++#define PM_PLLSEL_OFFSET 1
++#define PM_PLLSEL_SIZE 1
++#define PM_CEN_OFFSET 2
++#define PM_CEN_SIZE 1
++#define PM_DIVEN_OFFSET 4
++#define PM_DIVEN_SIZE 1
++#define PM_DIV_OFFSET 8
++#define PM_DIV_SIZE 8
++
++/* Bitfields in RCAUSE */
++#define PM_POR_OFFSET 0
++#define PM_POR_SIZE 1
++#define PM_EXT_OFFSET 2
++#define PM_EXT_SIZE 1
++#define PM_WDT_OFFSET 3
++#define PM_WDT_SIZE 1
++#define PM_NTAE_OFFSET 4
++#define PM_NTAE_SIZE 1
++
++/* Bit manipulation macros */
++#define PM_BIT(name) \
++ (1 << PM_##name##_OFFSET)
++#define PM_BF(name,value) \
++ (((value) & ((1 << PM_##name##_SIZE) - 1)) \
++ << PM_##name##_OFFSET)
++#define PM_BFEXT(name,value) \
++ (((value) >> PM_##name##_OFFSET) \
++ & ((1 << PM_##name##_SIZE) - 1))
++#define PM_BFINS(name,value,old)\
++ (((old) & ~(((1 << PM_##name##_SIZE) - 1) \
++ << PM_##name##_OFFSET)) \
++ | PM_BF(name,value))
++
++/* Register access macros */
++#define pm_readl(reg) \
++ __raw_readl((void __iomem *)AT32_PM_BASE + PM_##reg)
++#define pm_writel(reg,value) \
++ __raw_writel((value), (void __iomem *)AT32_PM_BASE + PM_##reg)
++
++#endif /* __ARCH_AVR32_MACH_AT32AP_PM_H__ */
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/mach-at32ap/sm.h linux-avr32.git/arch/avr32/mach-at32ap/sm.h
+--- linux-2.6.22.1/arch/avr32/mach-at32ap/sm.h 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/mach-at32ap/sm.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,242 +0,0 @@
+-/*
+- * Register definitions for SM
+- *
+- * System Manager
+- */
+-#ifndef __ASM_AVR32_SM_H__
+-#define __ASM_AVR32_SM_H__
+-
+-/* SM register offsets */
+-#define SM_PM_MCCTRL 0x0000
+-#define SM_PM_CKSEL 0x0004
+-#define SM_PM_CPU_MASK 0x0008
+-#define SM_PM_HSB_MASK 0x000c
+-#define SM_PM_PBA_MASK 0x0010
+-#define SM_PM_PBB_MASK 0x0014
+-#define SM_PM_PLL0 0x0020
+-#define SM_PM_PLL1 0x0024
+-#define SM_PM_VCTRL 0x0030
+-#define SM_PM_VMREF 0x0034
+-#define SM_PM_VMV 0x0038
+-#define SM_PM_IER 0x0040
+-#define SM_PM_IDR 0x0044
+-#define SM_PM_IMR 0x0048
+-#define SM_PM_ISR 0x004c
+-#define SM_PM_ICR 0x0050
+-#define SM_PM_GCCTRL 0x0060
+-#define SM_RTC_CTRL 0x0080
+-#define SM_RTC_VAL 0x0084
+-#define SM_RTC_TOP 0x0088
+-#define SM_RTC_IER 0x0090
+-#define SM_RTC_IDR 0x0094
+-#define SM_RTC_IMR 0x0098
+-#define SM_RTC_ISR 0x009c
+-#define SM_RTC_ICR 0x00a0
+-#define SM_WDT_CTRL 0x00b0
+-#define SM_WDT_CLR 0x00b4
+-#define SM_WDT_EXT 0x00b8
+-#define SM_RC_RCAUSE 0x00c0
+-#define SM_EIM_IER 0x0100
+-#define SM_EIM_IDR 0x0104
+-#define SM_EIM_IMR 0x0108
+-#define SM_EIM_ISR 0x010c
+-#define SM_EIM_ICR 0x0110
+-#define SM_EIM_MODE 0x0114
+-#define SM_EIM_EDGE 0x0118
+-#define SM_EIM_LEVEL 0x011c
+-#define SM_EIM_TEST 0x0120
+-#define SM_EIM_NMIC 0x0124
+-
+-/* Bitfields in PM_MCCTRL */
+-
+-/* Bitfields in PM_CKSEL */
+-#define SM_CPUSEL_OFFSET 0
+-#define SM_CPUSEL_SIZE 3
+-#define SM_CPUDIV_OFFSET 7
+-#define SM_CPUDIV_SIZE 1
+-#define SM_HSBSEL_OFFSET 8
+-#define SM_HSBSEL_SIZE 3
+-#define SM_HSBDIV_OFFSET 15
+-#define SM_HSBDIV_SIZE 1
+-#define SM_PBASEL_OFFSET 16
+-#define SM_PBASEL_SIZE 3
+-#define SM_PBADIV_OFFSET 23
+-#define SM_PBADIV_SIZE 1
+-#define SM_PBBSEL_OFFSET 24
+-#define SM_PBBSEL_SIZE 3
+-#define SM_PBBDIV_OFFSET 31
+-#define SM_PBBDIV_SIZE 1
+-
+-/* Bitfields in PM_CPU_MASK */
+-
+-/* Bitfields in PM_HSB_MASK */
+-
+-/* Bitfields in PM_PBA_MASK */
+-
+-/* Bitfields in PM_PBB_MASK */
+-
+-/* Bitfields in PM_PLL0 */
+-#define SM_PLLEN_OFFSET 0
+-#define SM_PLLEN_SIZE 1
+-#define SM_PLLOSC_OFFSET 1
+-#define SM_PLLOSC_SIZE 1
+-#define SM_PLLOPT_OFFSET 2
+-#define SM_PLLOPT_SIZE 3
+-#define SM_PLLDIV_OFFSET 8
+-#define SM_PLLDIV_SIZE 8
+-#define SM_PLLMUL_OFFSET 16
+-#define SM_PLLMUL_SIZE 8
+-#define SM_PLLCOUNT_OFFSET 24
+-#define SM_PLLCOUNT_SIZE 6
+-#define SM_PLLTEST_OFFSET 31
+-#define SM_PLLTEST_SIZE 1
+-
+-/* Bitfields in PM_PLL1 */
+-
+-/* Bitfields in PM_VCTRL */
+-#define SM_VAUTO_OFFSET 0
+-#define SM_VAUTO_SIZE 1
+-#define SM_PM_VCTRL_VAL_OFFSET 8
+-#define SM_PM_VCTRL_VAL_SIZE 7
+-
+-/* Bitfields in PM_VMREF */
+-#define SM_REFSEL_OFFSET 0
+-#define SM_REFSEL_SIZE 4
+-
+-/* Bitfields in PM_VMV */
+-#define SM_PM_VMV_VAL_OFFSET 0
+-#define SM_PM_VMV_VAL_SIZE 8
+-
+-/* Bitfields in PM_IER */
+-
+-/* Bitfields in PM_IDR */
+-
+-/* Bitfields in PM_IMR */
+-
+-/* Bitfields in PM_ISR */
+-
+-/* Bitfields in PM_ICR */
+-#define SM_LOCK0_OFFSET 0
+-#define SM_LOCK0_SIZE 1
+-#define SM_LOCK1_OFFSET 1
+-#define SM_LOCK1_SIZE 1
+-#define SM_WAKE_OFFSET 2
+-#define SM_WAKE_SIZE 1
+-#define SM_VOK_OFFSET 3
+-#define SM_VOK_SIZE 1
+-#define SM_VMRDY_OFFSET 4
+-#define SM_VMRDY_SIZE 1
+-#define SM_CKRDY_OFFSET 5
+-#define SM_CKRDY_SIZE 1
+-
+-/* Bitfields in PM_GCCTRL */
+-#define SM_OSCSEL_OFFSET 0
+-#define SM_OSCSEL_SIZE 1
+-#define SM_PLLSEL_OFFSET 1
+-#define SM_PLLSEL_SIZE 1
+-#define SM_CEN_OFFSET 2
+-#define SM_CEN_SIZE 1
+-#define SM_CPC_OFFSET 3
+-#define SM_CPC_SIZE 1
+-#define SM_DIVEN_OFFSET 4
+-#define SM_DIVEN_SIZE 1
+-#define SM_DIV_OFFSET 8
+-#define SM_DIV_SIZE 8
+-
+-/* Bitfields in RTC_CTRL */
+-#define SM_PCLR_OFFSET 1
+-#define SM_PCLR_SIZE 1
+-#define SM_TOPEN_OFFSET 2
+-#define SM_TOPEN_SIZE 1
+-#define SM_CLKEN_OFFSET 3
+-#define SM_CLKEN_SIZE 1
+-#define SM_PSEL_OFFSET 8
+-#define SM_PSEL_SIZE 16
+-
+-/* Bitfields in RTC_VAL */
+-#define SM_RTC_VAL_VAL_OFFSET 0
+-#define SM_RTC_VAL_VAL_SIZE 31
+-
+-/* Bitfields in RTC_TOP */
+-#define SM_RTC_TOP_VAL_OFFSET 0
+-#define SM_RTC_TOP_VAL_SIZE 32
+-
+-/* Bitfields in RTC_IER */
+-
+-/* Bitfields in RTC_IDR */
+-
+-/* Bitfields in RTC_IMR */
+-
+-/* Bitfields in RTC_ISR */
+-
+-/* Bitfields in RTC_ICR */
+-#define SM_TOPI_OFFSET 0
+-#define SM_TOPI_SIZE 1
+-
+-/* Bitfields in WDT_CTRL */
+-#define SM_KEY_OFFSET 24
+-#define SM_KEY_SIZE 8
+-
+-/* Bitfields in WDT_CLR */
+-
+-/* Bitfields in WDT_EXT */
+-
+-/* Bitfields in RC_RCAUSE */
+-#define SM_POR_OFFSET 0
+-#define SM_POR_SIZE 1
+-#define SM_BOD_OFFSET 1
+-#define SM_BOD_SIZE 1
+-#define SM_EXT_OFFSET 2
+-#define SM_EXT_SIZE 1
+-#define SM_WDT_OFFSET 3
+-#define SM_WDT_SIZE 1
+-#define SM_NTAE_OFFSET 4
+-#define SM_NTAE_SIZE 1
+-#define SM_SERP_OFFSET 5
+-#define SM_SERP_SIZE 1
+-
+-/* Bitfields in EIM_IER */
+-
+-/* Bitfields in EIM_IDR */
+-
+-/* Bitfields in EIM_IMR */
+-
+-/* Bitfields in EIM_ISR */
+-
+-/* Bitfields in EIM_ICR */
+-
+-/* Bitfields in EIM_MODE */
+-
+-/* Bitfields in EIM_EDGE */
+-#define SM_INT0_OFFSET 0
+-#define SM_INT0_SIZE 1
+-#define SM_INT1_OFFSET 1
+-#define SM_INT1_SIZE 1
+-#define SM_INT2_OFFSET 2
+-#define SM_INT2_SIZE 1
+-#define SM_INT3_OFFSET 3
+-#define SM_INT3_SIZE 1
+-
+-/* Bitfields in EIM_LEVEL */
+-
+-/* Bitfields in EIM_TEST */
+-#define SM_TESTEN_OFFSET 31
+-#define SM_TESTEN_SIZE 1
+-
+-/* Bitfields in EIM_NMIC */
+-#define SM_EN_OFFSET 0
+-#define SM_EN_SIZE 1
+-
+-/* Bit manipulation macros */
+-#define SM_BIT(name) (1 << SM_##name##_OFFSET)
+-#define SM_BF(name,value) (((value) & ((1 << SM_##name##_SIZE) - 1)) << SM_##name##_OFFSET)
+-#define SM_BFEXT(name,value) (((value) >> SM_##name##_OFFSET) & ((1 << SM_##name##_SIZE) - 1))
+-#define SM_BFINS(name,value,old) (((old) & ~(((1 << SM_##name##_SIZE) - 1) << SM_##name##_OFFSET)) | SM_BF(name,value))
+-
+-/* Register access macros */
+-#define sm_readl(port,reg) \
+- __raw_readl((port)->regs + SM_##reg)
+-#define sm_writel(port,reg,value) \
+- __raw_writel((value), (port)->regs + SM_##reg)
+-
+-#endif /* __ASM_AVR32_SM_H__ */
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/Makefile linux-avr32.git/arch/avr32/Makefile
+--- linux-2.6.22.1/arch/avr32/Makefile 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/Makefile 2007-06-06 11:33:46.000000000 +0200
+@@ -31,6 +31,7 @@
core-$(CONFIG_LOADER_U_BOOT) += arch/avr32/boot/u-boot/
core-y += arch/avr32/kernel/
core-y += arch/avr32/mm/
@@ -4385,566 +3637,398 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/Makefile avr32-git/arc
libs-y += arch/avr32/lib/
archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mm/dma-coherent.c avr32-git/arch/avr32/mm/dma-coherent.c
---- linux-2.6.21.3/arch/avr32/mm/dma-coherent.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/mm/dma-coherent.c 2007-06-06 11:33:46.000000000 +0200
-@@ -112,16 +112,21 @@
- }
- EXPORT_SYMBOL(dma_free_coherent);
-
--#if 0
- void *dma_alloc_writecombine(struct device *dev, size_t size,
- dma_addr_t *handle, gfp_t gfp)
- {
- struct page *page;
-+ dma_addr_t phys;
-
- page = __dma_alloc(dev, size, handle, gfp);
-+ if (!page)
-+ return NULL;
+diff -x .git -Nur linux-2.6.22.1/arch/avr32/mm/dma-coherent.c linux-avr32.git/arch/avr32/mm/dma-coherent.c
+--- linux-2.6.22.1/arch/avr32/mm/dma-coherent.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/arch/avr32/mm/dma-coherent.c 2007-07-12 13:59:49.000000000 +0200
+@@ -41,6 +41,13 @@
+ struct page *page, *free, *end;
+ int order;
+
++ /* Following is a work-around (a.k.a. hack) to prevent pages
++ * with __GFP_COMP being passed to split_page() which cannot
++ * handle them. The real problem is that this flag probably
++ * should be 0 on AVR32 as it is not supported on this
++ * platform--see CONFIG_HUGETLB_PAGE. */
++ gfp &= ~(__GFP_COMP);
++
+ size = PAGE_ALIGN(size);
+ order = get_order(size);
+
+diff -x .git -Nur linux-2.6.22.1/drivers/char/watchdog/at32ap700x_wdt.c linux-avr32.git/drivers/char/watchdog/at32ap700x_wdt.c
+--- linux-2.6.22.1/drivers/char/watchdog/at32ap700x_wdt.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/drivers/char/watchdog/at32ap700x_wdt.c 2007-07-12 13:59:59.000000000 +0200
+@@ -0,0 +1,325 @@
++/*
++ * Watchdog driver for Atmel AT32AP700X devices
++ *
++ * Copyright (C) 2005-2006 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
+
-+ phys = page_to_phys(page);
-+ *handle = phys;
-
- /* Now, map the page into P3 with write-combining turned on */
-- return __ioremap(page_to_phys(page), size, _PAGE_BUFFER);
-+ return __ioremap(phys, size, _PAGE_BUFFER);
- }
- EXPORT_SYMBOL(dma_alloc_writecombine);
-
-@@ -132,8 +137,7 @@
-
- iounmap(cpu_addr);
-
-- page = bus_to_page(handle);
-+ page = phys_to_page(handle);
- __dma_free(dev, size, page, handle);
- }
- EXPORT_SYMBOL(dma_free_writecombine);
--#endif
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mm/fault.c avr32-git/arch/avr32/mm/fault.c
---- linux-2.6.21.3/arch/avr32/mm/fault.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/mm/fault.c 2007-06-06 11:33:46.000000000 +0200
-@@ -12,73 +12,46 @@
- #include <linux/mm.h>
- #include <linux/module.h>
- #include <linux/pagemap.h>
-+#include <linux/kprobes.h>
-
- #include <asm/kdebug.h>
- #include <asm/mmu_context.h>
- #include <asm/sysreg.h>
--#include <asm/uaccess.h>
- #include <asm/tlb.h>
--
--#ifdef DEBUG
--static void dump_code(unsigned long pc)
--{
-- char *p = (char *)pc;
-- char val;
-- int i;
--
--
-- printk(KERN_DEBUG "Code:");
-- for (i = 0; i < 16; i++) {
-- if (__get_user(val, p + i))
-- break;
-- printk(" %02x", val);
-- }
-- printk("\n");
--}
--#endif
-+#include <asm/uaccess.h>
-
- #ifdef CONFIG_KPROBES
--ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
--
--/* Hook to register for page fault notifications */
--int register_page_fault_notifier(struct notifier_block *nb)
-+static inline int notify_page_fault(struct pt_regs *regs, int trap)
- {
-- return atomic_notifier_chain_register(&notify_page_fault_chain, nb);
--}
-+ int ret = 0;
-
--int unregister_page_fault_notifier(struct notifier_block *nb)
--{
-- return atomic_notifier_chain_unregister(&notify_page_fault_chain, nb);
--}
-+ if (!user_mode(regs)) {
-+ if (kprobe_running() && kprobe_fault_handler(regs, trap))
-+ ret = 1;
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/miscdevice.h>
++#include <linux/fs.h>
++#include <linux/platform_device.h>
++#include <linux/watchdog.h>
++#include <linux/uaccess.h>
++#include <linux/io.h>
++
++#define TIMEOUT_MIN 1
++#define TIMEOUT_DEFAULT CONFIG_AT32AP700X_WDT_TIMEOUT
++#define TIMEOUT_MAX 2
++
++/* Watchdog registers and write/read macro */
++#define WDT_CTRL 0x00
++#define WDT_CTRL_EN 0
++#define WDT_CTRL_PSEL 8
++#define WDT_CTRL_KEY 24
++
++#define WDT_CLR 0x04
++
++#define WDT_BIT(name) (1 << WDT_##name)
++#define WDT_BF(name,value) ((value) << WDT_##name)
++
++#define wdt_readl(dev,reg) \
++ __raw_readl((dev)->regs + WDT_##reg)
++#define wdt_writel(dev,reg,value) \
++ __raw_writel((value), (dev)->regs + WDT_##reg)
++
++struct wdt_at32ap700x {
++ void __iomem *regs;
++ int timeout;
++ int users;
++ struct miscdevice miscdev;
++};
++
++static struct wdt_at32ap700x *wdt;
++
++/*
++ * Disable the watchdog.
++ */
++static void inline at32_wdt_stop(void)
++{
++ unsigned long psel = wdt_readl(wdt, CTRL) & WDT_BF(CTRL_PSEL, 0x0f);
++ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0x55));
++ wdt_writel(wdt, CTRL, psel | WDT_BF(CTRL_KEY, 0xaa));
++}
++
++/*
++ * Enable and reset the watchdog.
++ */
++static void inline at32_wdt_start(void)
++{
++ /* 0xf is 2^16 divider = 2 sec, 0xe is 2^15 divider = 1 sec */
++ unsigned long psel = (wdt->timeout > 1) ? 0xf : 0xe;
++
++ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
++ | WDT_BF(CTRL_PSEL, psel)
++ | WDT_BF(CTRL_KEY, 0x55));
++ wdt_writel(wdt, CTRL, WDT_BIT(CTRL_EN)
++ | WDT_BF(CTRL_PSEL, psel)
++ | WDT_BF(CTRL_KEY, 0xaa));
++}
++
++/*
++ * Pat the watchdog timer.
++ */
++static void inline at32_wdt_pat(void)
++{
++ wdt_writel(wdt, CLR, 0x42);
++}
++
++/*
++ * Watchdog device is opened, and watchdog starts running.
++ */
++static int at32_wdt_open(struct inode *inode, struct file *file)
++{
++ if (test_and_set_bit(1, &wdt->users))
++ return -EBUSY;
++
++ at32_wdt_start();
++ return nonseekable_open(inode, file);
++}
++
++/*
++ * Close the watchdog device. If CONFIG_WATCHDOG_NOWAYOUT is _not_ defined then
++ * the watchdog is also disabled.
++ */
++static int at32_wdt_close(struct inode *inode, struct file *file)
++{
++#ifndef CONFIG_WATCHDOG_NOWAYOUT
++ at32_wdt_stop();
++#endif
++ clear_bit(1, &wdt->users);
++ return 0;
++}
++
++/*
++ * Change the watchdog time interval.
++ */
++static int at32_wdt_settimeout(int time)
++{
++ /*
++ * All counting occurs at 1 / SLOW_CLOCK (32 kHz) and max prescaler is
++ * 2 ^ 16 allowing up to 2 seconds timeout.
++ */
++ if ((time < TIMEOUT_MIN) || (time > TIMEOUT_MAX))
++ return -EINVAL;
++
++ /*
++ * Set new watchdog time. It will be used when at32_wdt_start() is
++ * called.
++ */
++ wdt->timeout = time;
++ return 0;
++}
++
++static struct watchdog_info at32_wdt_info = {
++ .identity = "at32ap700x watchdog",
++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
++};
++
++/*
++ * Handle commands from user-space.
++ */
++static int at32_wdt_ioctl(struct inode *inode, struct file *file,
++ unsigned int cmd, unsigned long arg)
++{
++ int ret = -ENOTTY;
++ int time;
++ void __user *argp = (void __user *)arg;
++ int __user *p = argp;
++
++ switch (cmd) {
++ case WDIOC_KEEPALIVE:
++ at32_wdt_pat();
++ ret = 0;
++ break;
++ case WDIOC_GETSUPPORT:
++ ret = copy_to_user(argp, &at32_wdt_info,
++ sizeof(at32_wdt_info)) ? -EFAULT : 0;
++ break;
++ case WDIOC_SETTIMEOUT:
++ ret = get_user(time, p);
++ if (ret)
++ break;
++ ret = at32_wdt_settimeout(time);
++ if (ret)
++ break;
++ /* Enable new time value */
++ at32_wdt_start();
++ /* fall through */
++ case WDIOC_GETTIMEOUT:
++ ret = put_user(wdt->timeout, p);
++ break;
++ case WDIOC_GETSTATUS: /* fall through */
++ case WDIOC_GETBOOTSTATUS:
++ ret = put_user(0, p);
++ break;
++ case WDIOC_SETOPTIONS:
++ ret = get_user(time, p);
++ if (ret)
++ break;
++ if (time & WDIOS_DISABLECARD)
++ at32_wdt_stop();
++ if (time & WDIOS_ENABLECARD)
++ at32_wdt_start();
++ ret = 0;
++ break;
+ }
-
--static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
-- int trap, int sig)
--{
-- struct die_args args = {
-- .regs = regs,
-- .trapnr = trap,
-- };
-- return atomic_notifier_call_chain(&notify_page_fault_chain, val, &args);
++
+ return ret;
- }
- #else
--static inline int notify_page_fault(enum die_val val, struct pt_regs *regs,
-- int trap, int sig)
-+static inline int notify_page_fault(struct pt_regs *regs, int trap)
- {
-- return NOTIFY_DONE;
++}
++
++static ssize_t at32_wdt_write(struct file *file, const char *data, size_t len,
++ loff_t *ppos)
++{
++ at32_wdt_pat();
++ return len;
++}
++
++static const struct file_operations at32_wdt_fops = {
++ .owner = THIS_MODULE,
++ .llseek = no_llseek,
++ .ioctl = at32_wdt_ioctl,
++ .open = at32_wdt_open,
++ .release = at32_wdt_close,
++ .write = at32_wdt_write,
++};
++
++static int __init at32_wdt_probe(struct platform_device *pdev)
++{
++ struct resource *regs;
++ int ret;
++
++ if (wdt) {
++ dev_dbg(&pdev->dev, "only 1 wdt instance supported.\n");
++ return -EBUSY;
++ }
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs) {
++ dev_dbg(&pdev->dev, "missing mmio resource\n");
++ return -ENXIO;
++ }
++
++ wdt = kzalloc(sizeof(struct wdt_at32ap700x), GFP_KERNEL);
++ if (!wdt) {
++ dev_dbg(&pdev->dev, "no memory for wdt structure\n");
++ return -ENOMEM;
++ }
++
++ wdt->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!wdt->regs) {
++ ret = -ENOMEM;
++ dev_dbg(&pdev->dev, "could not map I/O memory\n");
++ goto err_free;
++ }
++ wdt->users = 0;
++ wdt->miscdev.minor = WATCHDOG_MINOR;
++ wdt->miscdev.name = "watchdog";
++ wdt->miscdev.fops = &at32_wdt_fops;
++
++ if (at32_wdt_settimeout(TIMEOUT_DEFAULT)) {
++ at32_wdt_settimeout(TIMEOUT_MAX);
++ dev_dbg(&pdev->dev,
++ "default timeout invalid, set to %d sec.\n",
++ TIMEOUT_MAX);
++ }
++
++ ret = misc_register(&wdt->miscdev);
++ if (ret) {
++ dev_dbg(&pdev->dev, "failed to register wdt miscdev\n");
++ goto err_iounmap;
++ }
++
++ platform_set_drvdata(pdev, wdt);
++ wdt->miscdev.parent = &pdev->dev;
++ dev_info(&pdev->dev, "AT32AP700X WDT at 0x%p\n", wdt->regs);
++
+ return 0;
- }
- #endif
-
-+int exception_trace = 1;
+
- /*
- * This routine handles page faults. It determines the address and the
- * problem, and then passes it off to one of the appropriate routines.
- *
- * ecr is the Exception Cause Register. Possible values are:
-- * 5: Page not found (instruction access)
- * 6: Protection fault (instruction access)
-- * 12: Page not found (read access)
-- * 13: Page not found (write access)
-- * 14: Protection fault (read access)
-- * 15: Protection fault (write access)
-+ * 15: Protection fault (read access)
-+ * 16: Protection fault (write access)
-+ * 20: Page not found (instruction access)
-+ * 24: Page not found (read access)
-+ * 28: Page not found (write access)
- */
- asmlinkage void do_page_fault(unsigned long ecr, struct pt_regs *regs)
- {
-@@ -88,10 +61,11 @@
- const struct exception_table_entry *fixup;
- unsigned long address;
- unsigned long page;
-- int writeaccess = 0;
-+ int writeaccess;
-+ long signr;
-+ int code;
-
-- if (notify_page_fault(DIE_PAGE_FAULT, regs,
-- ecr, SIGSEGV) == NOTIFY_STOP)
-+ if (notify_page_fault(regs, ecr))
- return;
-
- address = sysreg_read(TLBEAR);
-@@ -99,6 +73,9 @@
- tsk = current;
- mm = tsk->mm;
-
-+ signr = SIGSEGV;
-+ code = SEGV_MAPERR;
++err_iounmap:
++ iounmap(wdt->regs);
++err_free:
++ kfree(wdt);
++ wdt = NULL;
++ return ret;
++}
+
- /*
- * If we're in an interrupt or have no user context, we must
- * not take the fault...
-@@ -125,7 +102,9 @@
- * can handle it...
- */
- good_area:
-- //pr_debug("good area: vm_flags = 0x%lx\n", vma->vm_flags);
-+ code = SEGV_ACCERR;
-+ writeaccess = 0;
-+
- switch (ecr) {
- case ECR_PROTECTION_X:
- case ECR_TLB_MISS_X:
-@@ -176,46 +155,24 @@
- * map. Fix it, but check if it's kernel or user first...
- */
- bad_area:
-- pr_debug("Bad area [%s:%u]: addr %08lx, ecr %lu\n",
-- tsk->comm, tsk->pid, address, ecr);
--
- up_read(&mm->mmap_sem);
-
- if (user_mode(regs)) {
-- /* Hmm...we have to pass address and ecr somehow... */
-- /* tsk->thread.address = address;
-- tsk->thread.error_code = ecr; */
--#ifdef DEBUG
-- show_regs(regs);
-- dump_code(regs->pc);
--
-- page = sysreg_read(PTBR);
-- printk("ptbr = %08lx", page);
-- if (page) {
-- page = ((unsigned long *)page)[address >> 22];
-- printk(" pgd = %08lx", page);
-- if (page & _PAGE_PRESENT) {
-- page &= PAGE_MASK;
-- address &= 0x003ff000;
-- page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT];
-- printk(" pte = %08lx\n", page);
-- }
-- }
--#endif
-- pr_debug("Sending SIGSEGV to PID %d...\n",
-- tsk->pid);
-- force_sig(SIGSEGV, tsk);
-+ if (exception_trace && printk_ratelimit())
-+ printk("%s%s[%d]: segfault at %08lx pc %08lx "
-+ "sp %08lx ecr %lu\n",
-+ is_init(tsk) ? KERN_EMERG : KERN_INFO,
-+ tsk->comm, tsk->pid, address, regs->pc,
-+ regs->sp, ecr);
-+ _exception(SIGSEGV, regs, code, address);
- return;
- }
-
- no_context:
-- pr_debug("No context\n");
--
- /* Are we prepared to handle this kernel fault? */
- fixup = search_exception_tables(regs->pc);
- if (fixup) {
- regs->pc = fixup->fixup;
-- pr_debug("Found fixup at %08lx\n", fixup->fixup);
- return;
- }
-
-@@ -230,7 +187,6 @@
- printk(KERN_ALERT
- "Unable to handle kernel paging request");
- printk(" at virtual address %08lx\n", address);
-- printk(KERN_ALERT "pc = %08lx\n", regs->pc);
-
- page = sysreg_read(PTBR);
- printk(KERN_ALERT "ptbr = %08lx", page);
-@@ -241,20 +197,20 @@
- page &= PAGE_MASK;
- address &= 0x003ff000;
- page = ((unsigned long *)__va(page))[address >> PAGE_SHIFT];
-- printk(" pte = %08lx\n", page);
-+ printk(" pte = %08lx", page);
- }
- }
-- die("\nOops", regs, ecr);
-- do_exit(SIGKILL);
-+ printk("\n");
-+ die("Kernel access of bad area", regs, signr);
-+ return;
-
- /*
- * We ran out of memory, or some other thing happened to us
- * that made us unable to handle the page fault gracefully.
- */
- out_of_memory:
-- printk("Out of memory\n");
- up_read(&mm->mmap_sem);
-- if (current->pid == 1) {
-+ if (is_init(current)) {
- yield();
- down_read(&mm->mmap_sem);
- goto survive;
-@@ -267,21 +223,20 @@
- do_sigbus:
- up_read(&mm->mmap_sem);
-
-- /*
-- * Send a sigbus, regardless of whether we were in kernel or
-- * user mode.
-- */
-- /* address, error_code, trap_no, ... */
--#ifdef DEBUG
-- show_regs(regs);
-- dump_code(regs->pc);
--#endif
-- pr_debug("Sending SIGBUS to PID %d...\n", tsk->pid);
-- force_sig(SIGBUS, tsk);
--
- /* Kernel mode? Handle exceptions or die */
-+ signr = SIGBUS;
-+ code = BUS_ADRERR;
- if (!user_mode(regs))
- goto no_context;
-+
-+ if (exception_trace)
-+ printk("%s%s[%d]: bus error at %08lx pc %08lx "
-+ "sp %08lx ecr %lu\n",
-+ is_init(tsk) ? KERN_EMERG : KERN_INFO,
-+ tsk->comm, tsk->pid, address, regs->pc,
-+ regs->sp, ecr);
-+
-+ _exception(SIGBUS, regs, BUS_ADRERR, address);
- }
-
- asmlinkage void do_bus_error(unsigned long addr, int write_access,
-@@ -292,8 +247,7 @@
- addr, write_access ? "write" : "read");
- printk(KERN_INFO "DTLB dump:\n");
- dump_dtlb();
-- die("Bus Error", regs, write_access);
-- do_exit(SIGKILL);
-+ die("Bus Error", regs, SIGKILL);
- }
++static int __exit at32_wdt_remove(struct platform_device *pdev)
++{
++ if (wdt && platform_get_drvdata(pdev) == wdt) {
++ misc_deregister(&wdt->miscdev);
++ iounmap(wdt->regs);
++ kfree(wdt);
++ wdt = NULL;
++ platform_set_drvdata(pdev, NULL);
++ }
++
++ return 0;
++}
++
++static void at32_wdt_shutdown(struct platform_device *pdev)
++{
++ at32_wdt_stop();
++}
++
++#ifdef CONFIG_PM
++static int at32_wdt_suspend(struct platform_device *pdev, pm_message_t message)
++{
++ at32_wdt_stop();
++ return 0;
++}
++
++static int at32_wdt_resume(struct platform_device *pdev)
++{
++ if (wdt->users)
++ at32_wdt_start();
++ return 0;
++}
++#else
++#define at32_wdt_suspend NULL
++#define at32_wdt_resume NULL
++#endif
++
++static struct platform_driver at32_wdt_driver = {
++ .remove = __exit_p(at32_wdt_remove),
++ .suspend = at32_wdt_suspend,
++ .resume = at32_wdt_resume,
++ .driver = {
++ .name = "at32_wdt",
++ .owner = THIS_MODULE,
++ },
++ .shutdown = at32_wdt_shutdown,
++};
++
++static int __init at32_wdt_init(void)
++{
++ return platform_driver_probe(&at32_wdt_driver, at32_wdt_probe);
++}
++module_init(at32_wdt_init);
++
++static void __exit at32_wdt_exit(void)
++{
++ platform_driver_unregister(&at32_wdt_driver);
++}
++module_exit(at32_wdt_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Watchdog driver for Atmel AT32AP700X");
++MODULE_LICENSE("GPL");
++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+diff -x .git -Nur linux-2.6.22.1/drivers/char/watchdog/Kconfig linux-avr32.git/drivers/char/watchdog/Kconfig
+--- linux-2.6.22.1/drivers/char/watchdog/Kconfig 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/char/watchdog/Kconfig 2007-07-12 13:59:59.000000000 +0200
+@@ -187,6 +187,26 @@
- /*
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/arch/avr32/mm/init.c avr32-git/arch/avr32/mm/init.c
---- linux-2.6.21.3/arch/avr32/mm/init.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/arch/avr32/mm/init.c 2007-06-06 11:33:46.000000000 +0200
-@@ -10,11 +10,9 @@
- #include <linux/mm.h>
- #include <linux/swap.h>
- #include <linux/init.h>
--#include <linux/initrd.h>
- #include <linux/mmzone.h>
- #include <linux/bootmem.h>
- #include <linux/pagemap.h>
--#include <linux/pfn.h>
- #include <linux/nodemask.h>
-
- #include <asm/page.h>
-@@ -78,242 +76,6 @@
- printk ("%d pages swap cached\n", cached);
- }
+ Say N if you are unsure.
--static void __init print_memory_map(const char *what,
-- struct tag_mem_range *mem)
--{
-- printk ("%s:\n", what);
-- for (; mem; mem = mem->next) {
-- printk (" %08lx - %08lx\n",
-- (unsigned long)mem->addr,
-- (unsigned long)(mem->addr + mem->size));
-- }
--}
--
--#define MAX_LOWMEM HIGHMEM_START
--#define MAX_LOWMEM_PFN PFN_DOWN(MAX_LOWMEM)
--
--/*
-- * Sort a list of memory regions in-place by ascending address.
-- *
-- * We're using bubble sort because we only have singly linked lists
-- * with few elements.
-- */
--static void __init sort_mem_list(struct tag_mem_range **pmem)
--{
-- int done;
-- struct tag_mem_range **a, **b;
--
-- if (!*pmem)
-- return;
--
-- do {
-- done = 1;
-- a = pmem, b = &(*pmem)->next;
-- while (*b) {
-- if ((*a)->addr > (*b)->addr) {
-- struct tag_mem_range *tmp;
-- tmp = (*b)->next;
-- (*b)->next = *a;
-- *a = *b;
-- *b = tmp;
-- done = 0;
-- }
-- a = &(*a)->next;
-- b = &(*a)->next;
-- }
-- } while (!done);
--}
--
--/*
-- * Find a free memory region large enough for storing the
-- * bootmem bitmap.
-- */
--static unsigned long __init
--find_bootmap_pfn(const struct tag_mem_range *mem)
--{
-- unsigned long bootmap_pages, bootmap_len;
-- unsigned long node_pages = PFN_UP(mem->size);
-- unsigned long bootmap_addr = mem->addr;
-- struct tag_mem_range *reserved = mem_reserved;
-- struct tag_mem_range *ramdisk = mem_ramdisk;
-- unsigned long kern_start = virt_to_phys(_stext);
-- unsigned long kern_end = virt_to_phys(_end);
--
-- bootmap_pages = bootmem_bootmap_pages(node_pages);
-- bootmap_len = bootmap_pages << PAGE_SHIFT;
--
-- /*
-- * Find a large enough region without reserved pages for
-- * storing the bootmem bitmap. We can take advantage of the
-- * fact that all lists have been sorted.
-- *
-- * We have to check explicitly reserved regions as well as the
-- * kernel image and any RAMDISK images...
-- *
-- * Oh, and we have to make sure we don't overwrite the taglist
-- * since we're going to use it until the bootmem allocator is
-- * fully up and running.
-- */
-- while (1) {
-- if ((bootmap_addr < kern_end) &&
-- ((bootmap_addr + bootmap_len) > kern_start))
-- bootmap_addr = kern_end;
--
-- while (reserved &&
-- (bootmap_addr >= (reserved->addr + reserved->size)))
-- reserved = reserved->next;
--
-- if (reserved &&
-- ((bootmap_addr + bootmap_len) >= reserved->addr)) {
-- bootmap_addr = reserved->addr + reserved->size;
-- continue;
-- }
--
-- while (ramdisk &&
-- (bootmap_addr >= (ramdisk->addr + ramdisk->size)))
-- ramdisk = ramdisk->next;
--
-- if (!ramdisk ||
-- ((bootmap_addr + bootmap_len) < ramdisk->addr))
-- break;
--
-- bootmap_addr = ramdisk->addr + ramdisk->size;
-- }
--
-- if ((PFN_UP(bootmap_addr) + bootmap_len) >= (mem->addr + mem->size))
-- return ~0UL;
--
-- return PFN_UP(bootmap_addr);
--}
--
--void __init setup_bootmem(void)
--{
-- unsigned bootmap_size;
-- unsigned long first_pfn, bootmap_pfn, pages;
-- unsigned long max_pfn, max_low_pfn;
-- unsigned long kern_start = virt_to_phys(_stext);
-- unsigned long kern_end = virt_to_phys(_end);
-- unsigned node = 0;
-- struct tag_mem_range *bank, *res;
--
-- sort_mem_list(&mem_phys);
-- sort_mem_list(&mem_reserved);
--
-- print_memory_map("Physical memory", mem_phys);
-- print_memory_map("Reserved memory", mem_reserved);
--
-- nodes_clear(node_online_map);
--
-- if (mem_ramdisk) {
--#ifdef CONFIG_BLK_DEV_INITRD
-- initrd_start = (unsigned long)__va(mem_ramdisk->addr);
-- initrd_end = initrd_start + mem_ramdisk->size;
--
-- print_memory_map("RAMDISK images", mem_ramdisk);
-- if (mem_ramdisk->next)
-- printk(KERN_WARNING
-- "Warning: Only the first RAMDISK image "
-- "will be used\n");
-- sort_mem_list(&mem_ramdisk);
--#else
-- printk(KERN_WARNING "RAM disk image present, but "
-- "no initrd support in kernel!\n");
--#endif
-- }
--
-- if (mem_phys->next)
-- printk(KERN_WARNING "Only using first memory bank\n");
--
-- for (bank = mem_phys; bank; bank = NULL) {
-- first_pfn = PFN_UP(bank->addr);
-- max_low_pfn = max_pfn = PFN_DOWN(bank->addr + bank->size);
-- bootmap_pfn = find_bootmap_pfn(bank);
-- if (bootmap_pfn > max_pfn)
-- panic("No space for bootmem bitmap!\n");
--
-- if (max_low_pfn > MAX_LOWMEM_PFN) {
-- max_low_pfn = MAX_LOWMEM_PFN;
--#ifndef CONFIG_HIGHMEM
-- /*
-- * Lowmem is memory that can be addressed
-- * directly through P1/P2
-- */
-- printk(KERN_WARNING
-- "Node %u: Only %ld MiB of memory will be used.\n",
-- node, MAX_LOWMEM >> 20);
-- printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
--#else
--#error HIGHMEM is not supported by AVR32 yet
--#endif
-- }
--
-- /* Initialize the boot-time allocator with low memory only. */
-- bootmap_size = init_bootmem_node(NODE_DATA(node), bootmap_pfn,
-- first_pfn, max_low_pfn);
--
-- printk("Node %u: bdata = %p, bdata->node_bootmem_map = %p\n",
-- node, NODE_DATA(node)->bdata,
-- NODE_DATA(node)->bdata->node_bootmem_map);
--
-- /*
-- * Register fully available RAM pages with the bootmem
-- * allocator.
-- */
-- pages = max_low_pfn - first_pfn;
-- free_bootmem_node (NODE_DATA(node), PFN_PHYS(first_pfn),
-- PFN_PHYS(pages));
--
-- /*
-- * Reserve space for the kernel image (if present in
-- * this node)...
-- */
-- if ((kern_start >= PFN_PHYS(first_pfn)) &&
-- (kern_start < PFN_PHYS(max_pfn))) {
-- printk("Node %u: Kernel image %08lx - %08lx\n",
-- node, kern_start, kern_end);
-- reserve_bootmem_node(NODE_DATA(node), kern_start,
-- kern_end - kern_start);
-- }
--
-- /* ...the bootmem bitmap... */
-- reserve_bootmem_node(NODE_DATA(node),
-- PFN_PHYS(bootmap_pfn),
-- bootmap_size);
--
-- /* ...any RAMDISK images... */
-- for (res = mem_ramdisk; res; res = res->next) {
-- if (res->addr > PFN_PHYS(max_pfn))
-- break;
--
-- if (res->addr >= PFN_PHYS(first_pfn)) {
-- printk("Node %u: RAMDISK %08lx - %08lx\n",
-- node,
-- (unsigned long)res->addr,
-- (unsigned long)(res->addr + res->size));
-- reserve_bootmem_node(NODE_DATA(node),
-- res->addr, res->size);
-- }
-- }
--
-- /* ...and any other reserved regions. */
-- for (res = mem_reserved; res; res = res->next) {
-- if (res->addr > PFN_PHYS(max_pfn))
-- break;
--
-- if (res->addr >= PFN_PHYS(first_pfn)) {
-- printk("Node %u: Reserved %08lx - %08lx\n",
-- node,
-- (unsigned long)res->addr,
-- (unsigned long)(res->addr + res->size));
-- reserve_bootmem_node(NODE_DATA(node),
-- res->addr, res->size);
-- }
-- }
--
-- node_set_online(node);
-- }
--}
--
- /*
- * paging_init() sets up the page tables
- *
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/i2c/busses/atmeltwi.h avr32-git/drivers/i2c/busses/atmeltwi.h
---- linux-2.6.21.3/drivers/i2c/busses/atmeltwi.h 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/drivers/i2c/busses/atmeltwi.h 2007-06-06 11:33:51.000000000 +0200
++# AVR32 Architecture
++
++config AT32AP700X_WDT
++ tristate "AT32AP700x watchdog"
++ depends on WATCHDOG && CPU_AT32AP7000
++ help
++ Watchdog timer embedded into AT32AP700x devices. This will reboot
++ your system when the timeout is reached.
++
++config AT32AP700X_WDT_TIMEOUT
++ int "Timeout value for AT32AP700x watchdog"
++ depends on AT32AP700X_WDT
++ default "2"
++ range 1 2
++ help
++ Sets the timeout value for the watchdog in AT32AP700x devices.
++ Limited by hardware to be 1 or 2 seconds.
++
++ Set to 2 seconds by default.
++
+ # X86 (i386 + ia64 + x86_64) Architecture
+
+ config ACQUIRE_WDT
+diff -x .git -Nur linux-2.6.22.1/drivers/char/watchdog/Makefile linux-avr32.git/drivers/char/watchdog/Makefile
+--- linux-2.6.22.1/drivers/char/watchdog/Makefile 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/char/watchdog/Makefile 2007-07-12 13:59:59.000000000 +0200
+@@ -36,6 +36,9 @@
+ obj-$(CONFIG_EP93XX_WATCHDOG) += ep93xx_wdt.o
+ obj-$(CONFIG_PNX4008_WATCHDOG) += pnx4008_wdt.o
+
++# AVR32 Architecture
++obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
++
+ # X86 (i386 + ia64 + x86_64) Architecture
+ obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o
+ obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o
+diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/atmeltwi.h linux-avr32.git/drivers/i2c/busses/atmeltwi.h
+--- linux-2.6.22.1/drivers/i2c/busses/atmeltwi.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/drivers/i2c/busses/atmeltwi.h 2007-06-06 11:33:51.000000000 +0200
@@ -0,0 +1,117 @@
+/*
+ * Register definitions for the Atmel Two-Wire Interface
@@ -5063,9 +4147,9 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/i2c/busses/atmeltwi.h avr
+ __raw_writel((value), (port)->regs + TWI_##reg)
+
+#endif /* __ASM_AVR32_TWI_H__ */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/i2c/busses/i2c-atmeltwi.c avr32-git/drivers/i2c/busses/i2c-atmeltwi.c
---- linux-2.6.21.3/drivers/i2c/busses/i2c-atmeltwi.c 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/drivers/i2c/busses/i2c-atmeltwi.c 2007-06-06 11:33:51.000000000 +0200
+diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c linux-avr32.git/drivers/i2c/busses/i2c-atmeltwi.c
+--- linux-2.6.22.1/drivers/i2c/busses/i2c-atmeltwi.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/drivers/i2c/busses/i2c-atmeltwi.c 2007-07-12 13:59:59.000000000 +0200
@@ -0,0 +1,348 @@
+/*
+ * i2c Support for Atmel's Two-Wire Interface (TWI)
@@ -5233,7 +4317,7 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/i2c/busses/i2c-atmeltwi.c
+}
+
+
-+static irqreturn_t twi_interrupt(int irq, void *dev_id, struct pt_regs *regs)
++static irqreturn_t twi_interrupt(int irq, void *dev_id)
+{
+ struct atmel_twi *twi = dev_id;
+ int status = twi_readl(twi, SR);
@@ -5415,293 +4499,283 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/i2c/busses/i2c-atmeltwi.c
+MODULE_AUTHOR("Espen Krangnes");
+MODULE_DESCRIPTION("I2C driver for Atmel TWI");
+MODULE_LICENSE("GPL");
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/i2c/busses/i2c-gpio.c avr32-git/drivers/i2c/busses/i2c-gpio.c
---- linux-2.6.21.3/drivers/i2c/busses/i2c-gpio.c 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/drivers/i2c/busses/i2c-gpio.c 2007-06-06 11:33:51.000000000 +0200
-@@ -0,0 +1,215 @@
+diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/Kconfig linux-avr32.git/drivers/i2c/busses/Kconfig
+--- linux-2.6.22.1/drivers/i2c/busses/Kconfig 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/i2c/busses/Kconfig 2007-07-12 13:59:59.000000000 +0200
+@@ -4,6 +4,26 @@
+
+ menu "I2C Hardware Bus support"
+
++config I2C_ATMELTWI
++ tristate "Atmel TWI/I2C"
++ depends on I2C
++ help
++ Atmel on-chip TWI controller. Say Y if you have an AT32 or
++ AT91-based device and want to use its built-in TWI
++ functionality. Atmel's TWI is compatible with Philips' I2C
++ protocol. If in doubt, say NO
++
++config I2C_ATMELTWI_BAUDRATE
++ prompt "Atmel TWI baudrate"
++ depends on I2C_ATMELTWI
++ int
++ default 100000
++ help
++ Set the TWI/I2C baudrate. This will alter the default value. A
++ different baudrate can be set by using a module parameter as well. If
++ no parameter is provided when loading, this is the value that will be
++ used.
++
+ config I2C_ALI1535
+ tristate "ALI 1535"
+ depends on PCI
+diff -x .git -Nur linux-2.6.22.1/drivers/i2c/busses/Makefile linux-avr32.git/drivers/i2c/busses/Makefile
+--- linux-2.6.22.1/drivers/i2c/busses/Makefile 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/i2c/busses/Makefile 2007-07-12 13:59:59.000000000 +0200
+@@ -52,6 +52,7 @@
+ obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
+
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
+diff -x .git -Nur linux-2.6.22.1/drivers/leds/Kconfig linux-avr32.git/drivers/leds/Kconfig
+--- linux-2.6.22.1/drivers/leds/Kconfig 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/leds/Kconfig 2007-07-12 14:00:02.000000000 +0200
+@@ -95,6 +95,14 @@
+ help
+ This option enables support for the front LED on Cobalt Server
+
++config LEDS_GPIO
++ tristate "LED Support for GPIO connected LEDs"
++ depends on LEDS_CLASS && GENERIC_GPIO
++ help
++ This option enables support for the LEDs connected to GPIO
++ outputs. To be useful the particular board must have LEDs
++ and they must be connected to the GPIO lines.
++
+ comment "LED Triggers"
+
+ config LEDS_TRIGGERS
+diff -x .git -Nur linux-2.6.22.1/drivers/leds/leds-gpio.c linux-avr32.git/drivers/leds/leds-gpio.c
+--- linux-2.6.22.1/drivers/leds/leds-gpio.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/drivers/leds/leds-gpio.c 2007-07-12 14:00:02.000000000 +0200
+@@ -0,0 +1,199 @@
+/*
-+ * Bitbanging I2C bus driver using the GPIO API
++ * LEDs driver for GPIOs
+ *
-+ * Copyright (C) 2007 Atmel Corporation
++ * Copyright (C) 2007 8D Technologies inc.
++ * Raphael Assenat <raph@8d.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
++ *
+ */
-+#include <linux/i2c.h>
-+#include <linux/i2c-algo-bit.h>
-+#include <linux/i2c-gpio.h>
++#include <linux/kernel.h>
+#include <linux/init.h>
-+#include <linux/module.h>
+#include <linux/platform_device.h>
++#include <linux/leds.h>
++#include <linux/workqueue.h>
+
+#include <asm/gpio.h>
+
-+/* Toggle SDA by changing the direction of the pin */
-+static void i2c_gpio_setsda_dir(void *data, int state)
-+{
-+ struct i2c_gpio_platform_data *pdata = data;
-+
-+ if (state)
-+ gpio_direction_input(pdata->sda_pin);
-+ else
-+ gpio_direction_output(pdata->sda_pin, 0);
-+}
++struct gpio_led_data {
++ struct led_classdev cdev;
++ unsigned gpio;
++ struct work_struct work;
++ u8 new_level;
++ u8 can_sleep;
++ u8 active_low;
++};
+
-+/*
-+ * Toggle SDA by changing the output value of the pin. This is only
-+ * valid for pins configured as open drain (i.e. setting the value
-+ * high effectively turns off the output driver.)
-+ */
-+static void i2c_gpio_setsda_val(void *data, int state)
++static void gpio_led_work(struct work_struct *work)
+{
-+ struct i2c_gpio_platform_data *pdata = data;
++ struct gpio_led_data *led_dat =
++ container_of(work, struct gpio_led_data, work);
+
-+ gpio_set_value(pdata->sda_pin, state);
++ gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
+}
+
-+/* Toggle SCL by changing the direction of the pin. */
-+static void i2c_gpio_setscl_dir(void *data, int state)
++static void gpio_led_set(struct led_classdev *led_cdev,
++ enum led_brightness value)
+{
-+ struct i2c_gpio_platform_data *pdata = data;
++ struct gpio_led_data *led_dat =
++ container_of(led_cdev, struct gpio_led_data, cdev);
++ int level;
+
-+ if (state)
-+ gpio_direction_input(pdata->scl_pin);
++ if (value == LED_OFF)
++ level = 0;
+ else
-+ gpio_direction_output(pdata->scl_pin, 0);
++ level = 1;
++
++ if (led_dat->active_low)
++ level = !level;
++
++ /* setting GPIOs with I2C/etc requires a preemptible task context */
++ if (led_dat->can_sleep) {
++ if (preempt_count()) {
++ led_dat->new_level = level;
++ schedule_work(&led_dat->work);
++ } else
++ gpio_set_value_cansleep(led_dat->gpio, level);
++ } else
++ gpio_set_value(led_dat->gpio, level);
+}
+
-+/*
-+ * Toggle SCL by changing the output value of the pin. This is used
-+ * for pins that are configured as open drain and for output-only
-+ * pins. The latter case will break the i2c protocol, but it will
-+ * often work in practice.
-+ */
-+static void i2c_gpio_setscl_val(void *data, int state)
++static int __init gpio_led_probe(struct platform_device *pdev)
+{
-+ struct i2c_gpio_platform_data *pdata = data;
-+
-+ gpio_set_value(pdata->scl_pin, state);
-+}
++ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++ struct gpio_led *cur_led;
++ struct gpio_led_data *leds_data, *led_dat;
++ int i, ret = 0;
+
-+int i2c_gpio_getsda(void *data)
-+{
-+ struct i2c_gpio_platform_data *pdata = data;
++ if (!pdata)
++ return -EBUSY;
+
-+ return gpio_get_value(pdata->sda_pin);
-+}
++ leds_data = kzalloc(sizeof(struct gpio_led_data) * pdata->num_leds,
++ GFP_KERNEL);
++ if (!leds_data)
++ return -ENOMEM;
+
-+int i2c_gpio_getscl(void *data)
-+{
-+ struct i2c_gpio_platform_data *pdata = data;
++ for (i = 0; i < pdata->num_leds; i++) {
++ cur_led = &pdata->leds[i];
++ led_dat = &leds_data[i];
+
-+ return gpio_get_value(pdata->scl_pin);
-+}
++ led_dat->cdev.name = cur_led->name;
++ led_dat->cdev.default_trigger = cur_led->default_trigger;
++ led_dat->gpio = cur_led->gpio;
++ led_dat->can_sleep = gpio_cansleep(cur_led->gpio);
++ led_dat->active_low = cur_led->active_low;
++ led_dat->cdev.brightness_set = gpio_led_set;
++ led_dat->cdev.brightness = cur_led->active_low ? LED_FULL : LED_OFF;
+
-+static int __init i2c_gpio_probe(struct platform_device *pdev)
-+{
-+ struct i2c_gpio_platform_data *pdata;
-+ struct i2c_algo_bit_data *bit_data;
-+ struct i2c_adapter *adap;
-+ int ret;
++ ret = gpio_request(led_dat->gpio, led_dat->cdev.name);
++ if (ret < 0)
++ goto err;
+
-+ pdata = pdev->dev.platform_data;
-+ if (!pdata)
-+ return -ENXIO;
++ gpio_direction_output(led_dat->gpio, led_dat->active_low);
+
-+ ret = -ENOMEM;
-+ adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL);
-+ if (!adap)
-+ goto err_alloc_adap;
-+ bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL);
-+ if (!bit_data)
-+ goto err_alloc_bit_data;
-+
-+ ret = gpio_request(pdata->sda_pin, "sda");
-+ if (ret)
-+ goto err_request_sda;
-+ ret = gpio_request(pdata->scl_pin, "scl");
-+ if (ret)
-+ goto err_request_scl;
++ ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
++ if (ret < 0) {
++ gpio_free(led_dat->gpio);
++ goto err;
++ }
+
-+ if (pdata->sda_is_open_drain) {
-+ gpio_direction_output(pdata->sda_pin, 1);
-+ bit_data->setsda = i2c_gpio_setsda_val;
-+ } else {
-+ gpio_direction_input(pdata->sda_pin);
-+ bit_data->setsda = i2c_gpio_setsda_dir;
++ INIT_WORK(&led_dat->work, gpio_led_work);
+ }
+
-+ if (pdata->scl_is_open_drain || pdata->scl_is_output_only) {
-+ gpio_direction_output(pdata->scl_pin, 1);
-+ bit_data->setscl = i2c_gpio_setscl_val;
-+ } else {
-+ gpio_direction_input(pdata->scl_pin);
-+ bit_data->setscl = i2c_gpio_setscl_dir;
++ platform_set_drvdata(pdev, leds_data);
++
++ return 0;
++
++err:
++ if (i > 0) {
++ for (i = i - 1; i >= 0; i--) {
++ led_classdev_unregister(&leds_data[i].cdev);
++ gpio_free(leds_data[i].gpio);
++ }
+ }
+
-+ if (!pdata->scl_is_output_only)
-+ bit_data->getscl = i2c_gpio_getscl;
-+ bit_data->getsda = i2c_gpio_getsda;
++ flush_scheduled_work();
++ kfree(leds_data);
+
-+ if (pdata->udelay)
-+ bit_data->udelay = pdata->udelay;
-+ else if (pdata->scl_is_output_only)
-+ bit_data->udelay = 50; /* 10 kHz */
-+ else
-+ bit_data->udelay = 5; /* 100 kHz */
++ return ret;
++}
+
-+ if (pdata->timeout)
-+ bit_data->timeout = pdata->timeout;
-+ else
-+ bit_data->timeout = HZ / 10; /* 100 ms */
++static int __exit gpio_led_remove(struct platform_device *pdev)
++{
++ int i;
++ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++ struct gpio_led_data *leds_data;
+
-+ bit_data->data = pdata;
++ leds_data = platform_get_drvdata(pdev);
+
-+ adap->owner = THIS_MODULE;
-+ snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id);
-+ adap->algo_data = bit_data;
-+ adap->dev.parent = &pdev->dev;
++ for (i = 0; i < pdata->num_leds; i++) {
++ led_classdev_unregister(&leds_data[i].cdev);
++ gpio_free(leds_data[i].gpio);
++ }
++
++ kfree(leds_data);
+
-+ ret = i2c_bit_add_bus(adap);
-+ if (ret)
-+ goto err_add_bus;
++ return 0;
++}
+
-+ platform_set_drvdata(pdev, adap);
++#ifdef CONFIG_PM
++static int gpio_led_suspend(struct platform_device *pdev, pm_message_t state)
++{
++ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++ struct gpio_led_data *leds_data;
++ int i;
++
++ leds_data = platform_get_drvdata(pdev);
+
-+ dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
-+ pdata->sda_pin, pdata->scl_pin,
-+ pdata->scl_is_output_only
-+ ? ", no clock stretching" : "");
++ for (i = 0; i < pdata->num_leds; i++)
++ led_classdev_suspend(&leds_data[i].cdev);
+
+ return 0;
-+
-+err_add_bus:
-+ gpio_free(pdata->scl_pin);
-+err_request_scl:
-+ gpio_free(pdata->sda_pin);
-+err_request_sda:
-+ kfree(bit_data);
-+err_alloc_bit_data:
-+ kfree(adap);
-+err_alloc_adap:
-+ return ret;
+}
+
-+static int __exit i2c_gpio_remove(struct platform_device *pdev)
++static int gpio_led_resume(struct platform_device *pdev)
+{
-+ struct i2c_gpio_platform_data *pdata;
-+ struct i2c_adapter *adap;
++ struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
++ struct gpio_led_data *leds_data;
++ int i;
+
-+ adap = platform_get_drvdata(pdev);
-+ pdata = pdev->dev.platform_data;
++ leds_data = platform_get_drvdata(pdev);
+
-+ i2c_del_adapter(adap);
-+ gpio_free(pdata->scl_pin);
-+ gpio_free(pdata->sda_pin);
-+ kfree(adap->algo_data);
-+ kfree(adap);
++ for (i = 0; i < pdata->num_leds; i++)
++ led_classdev_resume(&leds_data[i].cdev);
+
+ return 0;
+}
++#else
++#define gpio_led_suspend NULL
++#define gpio_led_resume NULL
++#endif
+
-+static struct platform_driver i2c_gpio_driver = {
++static struct platform_driver gpio_led_driver = {
++ .remove = __exit_p(gpio_led_remove),
++ .suspend = gpio_led_suspend,
++ .resume = gpio_led_resume,
+ .driver = {
-+ .name = "i2c-gpio",
++ .name = "leds-gpio",
+ .owner = THIS_MODULE,
+ },
-+ .remove = __exit_p(i2c_gpio_remove),
+};
+
-+static int __init i2c_gpio_init(void)
++static int __init gpio_led_init(void)
+{
-+ int ret;
-+
-+ ret = platform_driver_probe(&i2c_gpio_driver, i2c_gpio_probe);
-+ if (ret)
-+ printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret);
-+
-+ return ret;
++ return platform_driver_probe(&gpio_led_driver, gpio_led_probe);
+}
-+module_init(i2c_gpio_init);
+
-+static void __exit i2c_gpio_exit(void)
++static void __exit gpio_led_exit(void)
+{
-+ platform_driver_unregister(&i2c_gpio_driver);
++ platform_driver_unregister(&gpio_led_driver);
+}
-+module_exit(i2c_gpio_exit);
+
-+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
-+MODULE_DESCRIPTION("Platform-independent bitbanging I2C driver");
-+MODULE_LICENSE("GPL");
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/i2c/busses/Kconfig avr32-git/drivers/i2c/busses/Kconfig
---- linux-2.6.21.3/drivers/i2c/busses/Kconfig 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/i2c/busses/Kconfig 2007-06-06 11:33:51.000000000 +0200
-@@ -5,6 +5,26 @@
- menu "I2C Hardware Bus support"
- depends on I2C
-
-+config I2C_ATMELTWI
-+ tristate "Atmel TWI/I2C"
-+ depends on I2C
-+ help
-+ Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+ AT91-based device and want to use its built-in TWI
-+ functionality. Atmel's TWI is compatible with Philips' I2C
-+ protocol. If in doubt, say NO
++module_init(gpio_led_init);
++module_exit(gpio_led_exit);
+
-+config I2C_ATMELTWI_BAUDRATE
-+ prompt "Atmel TWI baudrate"
-+ depends on I2C_ATMELTWI
-+ int
-+ default 100000
-+ help
-+ Set the TWI/I2C baudrate. This will alter the default value. A
-+ different baudrate can be set by using a module parameter as well. If
-+ no parameter is provided when loading, this is the value that will be
-+ used.
-+
- config I2C_ALI1535
- tristate "ALI 1535"
- depends on I2C && PCI
-@@ -102,6 +122,14 @@
- This support is also available as a module. If so, the module
- will be called i2c-elektor.
-
-+config I2C_GPIO
-+ tristate "GPIO-based bitbanging I2C"
-+ depends on GENERIC_GPIO
-+ select I2C_ALGOBIT
-+ help
-+ This is a very simple bitbanging I2C driver utilizing the
-+ arch-neutral GPIO API to control the SCL and SDA lines.
-+
- config I2C_HYDRA
- tristate "CHRP Apple Hydra Mac I/O I2C interface"
- depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/i2c/busses/Makefile avr32-git/drivers/i2c/busses/Makefile
---- linux-2.6.21.3/drivers/i2c/busses/Makefile 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/i2c/busses/Makefile 2007-06-06 11:33:51.000000000 +0200
-@@ -11,6 +11,7 @@
- obj-$(CONFIG_I2C_AT91) += i2c-at91.o
- obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
- obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o
-+obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
- obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o
- obj-$(CONFIG_I2C_I801) += i2c-i801.o
- obj-$(CONFIG_I2C_I810) += i2c-i810.o
-@@ -48,6 +49,7 @@
- obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
- obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
-
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mmc/atmel-mci.c avr32-git/drivers/mmc/atmel-mci.c
---- linux-2.6.21.3/drivers/mmc/atmel-mci.c 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/drivers/mmc/atmel-mci.c 2007-06-06 11:33:56.000000000 +0200
-@@ -0,0 +1,1218 @@
++MODULE_AUTHOR("Raphael Assenat <raph@8d.com>");
++MODULE_DESCRIPTION("GPIO LED driver");
++MODULE_LICENSE("GPL");
+diff -x .git -Nur linux-2.6.22.1/drivers/leds/Makefile linux-avr32.git/drivers/leds/Makefile
+--- linux-2.6.22.1/drivers/leds/Makefile 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/leds/Makefile 2007-07-12 14:00:02.000000000 +0200
+@@ -16,6 +16,7 @@
+ obj-$(CONFIG_LEDS_WRAP) += leds-wrap.o
+ obj-$(CONFIG_LEDS_H1940) += leds-h1940.o
+ obj-$(CONFIG_LEDS_COBALT) += leds-cobalt.o
++obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+
+ # LED Triggers
+ obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+diff -x .git -Nur linux-2.6.22.1/drivers/mmc/host/atmel-mci.c linux-avr32.git/drivers/mmc/host/atmel-mci.c
+--- linux-2.6.22.1/drivers/mmc/host/atmel-mci.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/drivers/mmc/host/atmel-mci.c 2007-07-12 14:00:03.000000000 +0200
+@@ -0,0 +1,1217 @@
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
@@ -5722,7 +4796,6 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mmc/atmel-mci.c avr32-git
+#include <linux/platform_device.h>
+
+#include <linux/mmc/host.h>
-+#include <linux/mmc/protocol.h>
+
+#include <asm/dma-controller.h>
+#include <asm/io.h>
@@ -6920,9 +5993,9 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mmc/atmel-mci.c avr32-git
+
+MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
+MODULE_LICENSE("GPL");
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mmc/atmel-mci.h avr32-git/drivers/mmc/atmel-mci.h
---- linux-2.6.21.3/drivers/mmc/atmel-mci.h 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/drivers/mmc/atmel-mci.h 2007-06-06 11:33:56.000000000 +0200
+diff -x .git -Nur linux-2.6.22.1/drivers/mmc/host/atmel-mci.h linux-avr32.git/drivers/mmc/host/atmel-mci.h
+--- linux-2.6.22.1/drivers/mmc/host/atmel-mci.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/drivers/mmc/host/atmel-mci.h 2007-07-12 14:00:03.000000000 +0200
@@ -0,0 +1,192 @@
+/*
+ * Atmel MultiMedia Card Interface driver
@@ -7116,10 +6189,10 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mmc/atmel-mci.h avr32-git
+ __raw_writel((value), (port)->regs + MCI_##reg)
+
+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mmc/Kconfig avr32-git/drivers/mmc/Kconfig
---- linux-2.6.21.3/drivers/mmc/Kconfig 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/mmc/Kconfig 2007-06-06 11:33:56.000000000 +0200
-@@ -71,6 +71,16 @@
+diff -x .git -Nur linux-2.6.22.1/drivers/mmc/host/Kconfig linux-avr32.git/drivers/mmc/host/Kconfig
+--- linux-2.6.22.1/drivers/mmc/host/Kconfig 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/mmc/host/Kconfig 2007-07-12 14:00:03.000000000 +0200
+@@ -74,6 +74,16 @@
If unsure, say N.
@@ -7133,24 +6206,23 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mmc/Kconfig avr32-git/dri
+
+ If unsure, say N.
+
- config MMC_WBSD
- tristate "Winbond W83L51xD SD/MMC Card Interface support"
- depends on MMC && ISA_DMA_API
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mmc/Makefile avr32-git/drivers/mmc/Makefile
---- linux-2.6.21.3/drivers/mmc/Makefile 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/mmc/Makefile 2007-06-06 11:33:56.000000000 +0200
-@@ -23,6 +23,7 @@
+ config MMC_IMX
+ tristate "Motorola i.MX Multimedia Card Interface support"
+ depends on ARCH_IMX
+diff -x .git -Nur linux-2.6.22.1/drivers/mmc/host/Makefile linux-avr32.git/drivers/mmc/host/Makefile
+--- linux-2.6.22.1/drivers/mmc/host/Makefile 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/mmc/host/Makefile 2007-07-12 14:00:03.000000000 +0200
+@@ -14,5 +14,6 @@
obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
obj-$(CONFIG_MMC_OMAP) += omap.o
obj-$(CONFIG_MMC_AT91) += at91_mci.o
+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
- mmc_core-y := mmc.o mmc_sysfs.o
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mtd/chips/cfi_cmdset_0001.c avr32-git/drivers/mtd/chips/cfi_cmdset_0001.c
---- linux-2.6.21.3/drivers/mtd/chips/cfi_cmdset_0001.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/mtd/chips/cfi_cmdset_0001.c 2007-06-06 11:33:56.000000000 +0200
-@@ -47,6 +47,7 @@
+diff -x .git -Nur linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0001.c linux-avr32.git/drivers/mtd/chips/cfi_cmdset_0001.c
+--- linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0001.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/mtd/chips/cfi_cmdset_0001.c 2007-07-12 14:00:03.000000000 +0200
+@@ -50,6 +50,7 @@
#define I82802AC 0x00ac
#define MANUFACTURER_ST 0x0020
#define M50LPW080 0x002F
@@ -7158,7 +6230,7 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mtd/chips/cfi_cmdset_0001
static int cfi_intelext_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
static int cfi_intelext_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -153,6 +154,47 @@
+@@ -156,6 +157,47 @@
}
#endif
@@ -7206,7 +6278,7 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mtd/chips/cfi_cmdset_0001
#ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
/* Some Intel Strata Flash prior to FPO revision C has bugs in this area */
static void fixup_intel_strataflash(struct mtd_info *mtd, void* param)
-@@ -221,6 +263,7 @@
+@@ -233,6 +275,7 @@
}
static struct cfi_fixup cfi_fixup_table[] = {
@@ -7214,10 +6286,10 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mtd/chips/cfi_cmdset_0001
#ifdef CMDSET0001_DISABLE_ERASE_SUSPEND_ON_WRITE
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_intel_strataflash, NULL },
#endif
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mtd/chips/cfi_cmdset_0002.c avr32-git/drivers/mtd/chips/cfi_cmdset_0002.c
---- linux-2.6.21.3/drivers/mtd/chips/cfi_cmdset_0002.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/mtd/chips/cfi_cmdset_0002.c 2007-06-06 11:33:56.000000000 +0200
-@@ -185,6 +185,10 @@
+diff -x .git -Nur linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c linux-avr32.git/drivers/mtd/chips/cfi_cmdset_0002.c
+--- linux-2.6.22.1/drivers/mtd/chips/cfi_cmdset_0002.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/mtd/chips/cfi_cmdset_0002.c 2007-06-06 11:33:56.000000000 +0200
+@@ -186,6 +186,10 @@
extp->TopBottom = 2;
else
extp->TopBottom = 3;
@@ -7228,7 +6300,7 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mtd/chips/cfi_cmdset_0002
}
static void fixup_use_secsi(struct mtd_info *mtd, void *param)
-@@ -217,6 +221,7 @@
+@@ -218,6 +222,7 @@
}
static struct cfi_fixup cfi_fixup_table[] = {
@@ -7236,7 +6308,7 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mtd/chips/cfi_cmdset_0002
#ifdef AMD_BOOTLOC_BUG
{ CFI_MFR_AMD, CFI_ID_ANY, fixup_amd_bootblock, NULL },
#endif
-@@ -229,7 +234,6 @@
+@@ -230,7 +235,6 @@
#if !FORCE_WORD_WRITE
{ CFI_MFR_ANY, CFI_ID_ANY, fixup_use_write_buffers, NULL, },
#endif
@@ -7244,9 +6316,1093 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/mtd/chips/cfi_cmdset_0002
{ 0, 0, NULL, NULL }
};
static struct cfi_fixup jedec_fixup_table[] = {
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/serial/atmel_serial.c avr32-git/drivers/serial/atmel_serial.c
---- linux-2.6.21.3/drivers/serial/atmel_serial.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/serial/atmel_serial.c 2007-06-06 11:33:59.000000000 +0200
+diff -x .git -Nur linux-2.6.22.1/drivers/net/Kconfig linux-avr32.git/drivers/net/Kconfig
+--- linux-2.6.22.1/drivers/net/Kconfig 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/net/Kconfig 2007-07-12 14:00:03.000000000 +0200
+@@ -314,7 +314,7 @@
+ config MACB
+ tristate "Atmel MACB support"
+ depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
+- select MII
++ select PHYLIB
+ help
+ The Atmel MACB ethernet interface is found on many AT32 and AT91
+ parts. Say Y to include support for the MACB chip.
+diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.c linux-avr32.git/drivers/net/macb.c
+--- linux-2.6.22.1/drivers/net/macb.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/net/macb.c 2007-07-12 14:00:04.000000000 +0200
+@@ -17,13 +17,14 @@
+ #include <linux/init.h>
+ #include <linux/netdevice.h>
+ #include <linux/etherdevice.h>
+-#include <linux/mii.h>
+-#include <linux/mutex.h>
+ #include <linux/dma-mapping.h>
+-#include <linux/ethtool.h>
+ #include <linux/platform_device.h>
++#include <linux/phy.h>
+
+ #include <asm/arch/board.h>
++#if defined(CONFIG_ARCH_AT91)
++#include <asm/arch/cpu.h>
++#endif
+
+ #include "macb.h"
+
+@@ -85,172 +86,202 @@
+ memcpy(bp->dev->dev_addr, addr, sizeof(addr));
+ }
+
+-static void macb_enable_mdio(struct macb *bp)
+-{
+- unsigned long flags;
+- u32 reg;
+-
+- spin_lock_irqsave(&bp->lock, flags);
+- reg = macb_readl(bp, NCR);
+- reg |= MACB_BIT(MPE);
+- macb_writel(bp, NCR, reg);
+- macb_writel(bp, IER, MACB_BIT(MFD));
+- spin_unlock_irqrestore(&bp->lock, flags);
+-}
+-
+-static void macb_disable_mdio(struct macb *bp)
+-{
+- unsigned long flags;
+- u32 reg;
+-
+- spin_lock_irqsave(&bp->lock, flags);
+- reg = macb_readl(bp, NCR);
+- reg &= ~MACB_BIT(MPE);
+- macb_writel(bp, NCR, reg);
+- macb_writel(bp, IDR, MACB_BIT(MFD));
+- spin_unlock_irqrestore(&bp->lock, flags);
+-}
+-
+-static int macb_mdio_read(struct net_device *dev, int phy_id, int location)
++static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
+ {
+- struct macb *bp = netdev_priv(dev);
++ struct macb *bp = bus->priv;
+ int value;
+
+- mutex_lock(&bp->mdio_mutex);
+-
+- macb_enable_mdio(bp);
+ macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
+ | MACB_BF(RW, MACB_MAN_READ)
+- | MACB_BF(PHYA, phy_id)
+- | MACB_BF(REGA, location)
++ | MACB_BF(PHYA, mii_id)
++ | MACB_BF(REGA, regnum)
+ | MACB_BF(CODE, MACB_MAN_CODE)));
+
+- wait_for_completion(&bp->mdio_complete);
++ /* wait for end of transfer */
++ while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
++ cpu_relax();
+
+ value = MACB_BFEXT(DATA, macb_readl(bp, MAN));
+- macb_disable_mdio(bp);
+- mutex_unlock(&bp->mdio_mutex);
+
+ return value;
+ }
+
+-static void macb_mdio_write(struct net_device *dev, int phy_id,
+- int location, int val)
++static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
++ u16 value)
+ {
+- struct macb *bp = netdev_priv(dev);
+-
+- dev_dbg(&bp->pdev->dev, "mdio_write %02x:%02x <- %04x\n",
+- phy_id, location, val);
+-
+- mutex_lock(&bp->mdio_mutex);
+- macb_enable_mdio(bp);
++ struct macb *bp = bus->priv;
+
+ macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
+ | MACB_BF(RW, MACB_MAN_WRITE)
+- | MACB_BF(PHYA, phy_id)
+- | MACB_BF(REGA, location)
++ | MACB_BF(PHYA, mii_id)
++ | MACB_BF(REGA, regnum)
+ | MACB_BF(CODE, MACB_MAN_CODE)
+- | MACB_BF(DATA, val)));
++ | MACB_BF(DATA, value)));
++
++ /* wait for end of transfer */
++ while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
++ cpu_relax();
+
+- wait_for_completion(&bp->mdio_complete);
++ return 0;
++}
+
+- macb_disable_mdio(bp);
+- mutex_unlock(&bp->mdio_mutex);
++static int macb_mdio_reset(struct mii_bus *bus)
++{
++ return 0;
+ }
+
+-static int macb_phy_probe(struct macb *bp)
++static void macb_handle_link_change(struct net_device *dev)
+ {
+- int phy_address;
+- u16 phyid1, phyid2;
++ struct macb *bp = netdev_priv(dev);
++ struct phy_device *phydev = bp->phy_dev;
++ unsigned long flags;
+
+- for (phy_address = 0; phy_address < 32; phy_address++) {
+- phyid1 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID1);
+- phyid2 = macb_mdio_read(bp->dev, phy_address, MII_PHYSID2);
++ int status_change = 0;
+
+- if (phyid1 != 0xffff && phyid1 != 0x0000
+- && phyid2 != 0xffff && phyid2 != 0x0000)
+- break;
++ spin_lock_irqsave(&bp->lock, flags);
++
++ if (phydev->link) {
++ if ((bp->speed != phydev->speed) ||
++ (bp->duplex != phydev->duplex)) {
++ u32 reg;
++
++ reg = macb_readl(bp, NCFGR);
++ reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
++
++ if (phydev->duplex)
++ reg |= MACB_BIT(FD);
++ if (phydev->speed)
++ reg |= MACB_BIT(SPD);
++
++ macb_writel(bp, NCFGR, reg);
++
++ bp->speed = phydev->speed;
++ bp->duplex = phydev->duplex;
++ status_change = 1;
++ }
+ }
+
+- if (phy_address == 32)
+- return -ENODEV;
++ if (phydev->link != bp->link) {
++ if (phydev->link)
++ netif_schedule(dev);
++ else {
++ bp->speed = 0;
++ bp->duplex = -1;
++ }
++ bp->link = phydev->link;
+
+- dev_info(&bp->pdev->dev,
+- "detected PHY at address %d (ID %04x:%04x)\n",
+- phy_address, phyid1, phyid2);
++ status_change = 1;
++ }
+
+- bp->mii.phy_id = phy_address;
+- return 0;
++ spin_unlock_irqrestore(&bp->lock, flags);
++
++ if (status_change) {
++ if (phydev->link)
++ printk(KERN_INFO "%s: link up (%d/%s)\n",
++ dev->name, phydev->speed,
++ DUPLEX_FULL == phydev->duplex ? "Full":"Half");
++ else
++ printk(KERN_INFO "%s: link down\n", dev->name);
++ }
+ }
+
+-static void macb_set_media(struct macb *bp, int media)
++/* based on au1000_eth. c*/
++static int macb_mii_probe(struct net_device *dev)
+ {
+- u32 reg;
++ struct macb *bp = netdev_priv(dev);
++ struct phy_device *phydev = NULL;
++ struct eth_platform_data *pdata;
++ int phy_addr;
+
+- spin_lock_irq(&bp->lock);
+- reg = macb_readl(bp, NCFGR);
+- reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
+- if (media & (ADVERTISE_100HALF | ADVERTISE_100FULL))
+- reg |= MACB_BIT(SPD);
+- if (media & ADVERTISE_FULL)
+- reg |= MACB_BIT(FD);
+- macb_writel(bp, NCFGR, reg);
+- spin_unlock_irq(&bp->lock);
++ /* find the first phy */
++ for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) {
++ if (bp->mii_bus.phy_map[phy_addr]) {
++ phydev = bp->mii_bus.phy_map[phy_addr];
++ break;
++ }
++ }
++
++ if (!phydev) {
++ printk (KERN_ERR "%s: no PHY found\n", dev->name);
++ return -1;
++ }
++
++ pdata = bp->pdev->dev.platform_data;
++ /* TODO : add pin_irq */
++
++ /* attach the mac to the phy */
++ if (pdata && pdata->is_rmii) {
++ phydev = phy_connect(dev, phydev->dev.bus_id,
++ &macb_handle_link_change, 0, PHY_INTERFACE_MODE_RMII);
++ } else {
++ phydev = phy_connect(dev, phydev->dev.bus_id,
++ &macb_handle_link_change, 0, PHY_INTERFACE_MODE_MII);
++ }
++
++ if (IS_ERR(phydev)) {
++ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
++ return PTR_ERR(phydev);
++ }
++
++ /* mask with MAC supported features */
++ phydev->supported &= PHY_BASIC_FEATURES;
++
++ phydev->advertising = phydev->supported;
++
++ bp->link = 0;
++ bp->speed = 0;
++ bp->duplex = -1;
++ bp->phy_dev = phydev;
++
++ return 0;
+ }
+
+-static void macb_check_media(struct macb *bp, int ok_to_print, int init_media)
++static int macb_mii_init(struct macb *bp)
+ {
+- struct mii_if_info *mii = &bp->mii;
+- unsigned int old_carrier, new_carrier;
+- int advertise, lpa, media, duplex;
++ struct eth_platform_data *pdata;
++ int err = -ENXIO, i;
+
+- /* if forced media, go no further */
+- if (mii->force_media)
+- return;
++ /* Enable managment port */
++ macb_writel(bp, NCR, MACB_BIT(MPE));
+
+- /* check current and old link status */
+- old_carrier = netif_carrier_ok(mii->dev) ? 1 : 0;
+- new_carrier = (unsigned int) mii_link_ok(mii);
++ bp->mii_bus.name = "MACB_mii_bus",
++ bp->mii_bus.read = &macb_mdio_read,
++ bp->mii_bus.write = &macb_mdio_write,
++ bp->mii_bus.reset = &macb_mdio_reset,
++ bp->mii_bus.id = bp->pdev->id,
++ bp->mii_bus.priv = bp,
++ bp->mii_bus.dev = &bp->dev->dev;
++ pdata = bp->pdev->dev.platform_data;
+
+- /* if carrier state did not change, assume nothing else did */
+- if (!init_media && old_carrier == new_carrier)
+- return;
++ if (pdata)
++ bp->mii_bus.phy_mask = pdata->phy_mask;
+
+- /* no carrier, nothing much to do */
+- if (!new_carrier) {
+- netif_carrier_off(mii->dev);
+- printk(KERN_INFO "%s: link down\n", mii->dev->name);
+- return;
++ bp->mii_bus.irq = kmalloc(sizeof(int)*PHY_MAX_ADDR, GFP_KERNEL);
++ if (!bp->mii_bus.irq) {
++ err = -ENOMEM;
++ goto err_out;
+ }
+
+- /*
+- * we have carrier, see who's on the other end
+- */
+- netif_carrier_on(mii->dev);
++ for (i = 0; i < PHY_MAX_ADDR; i++)
++ bp->mii_bus.irq[i] = PHY_POLL;
+
+- /* get MII advertise and LPA values */
+- if (!init_media && mii->advertising) {
+- advertise = mii->advertising;
+- } else {
+- advertise = mii->mdio_read(mii->dev, mii->phy_id, MII_ADVERTISE);
+- mii->advertising = advertise;
+- }
+- lpa = mii->mdio_read(mii->dev, mii->phy_id, MII_LPA);
++ platform_set_drvdata(bp->dev, &bp->mii_bus);
+
+- /* figure out media and duplex from advertise and LPA values */
+- media = mii_nway_result(lpa & advertise);
+- duplex = (media & ADVERTISE_FULL) ? 1 : 0;
++ if (mdiobus_register(&bp->mii_bus))
++ goto err_out_free_mdio_irq;
+
+- if (ok_to_print)
+- printk(KERN_INFO "%s: link up, %sMbps, %s-duplex, lpa 0x%04X\n",
+- mii->dev->name,
+- media & (ADVERTISE_100FULL | ADVERTISE_100HALF) ? "100" : "10",
+- duplex ? "full" : "half", lpa);
++ if (macb_mii_probe(bp->dev) != 0) {
++ goto err_out_unregister_bus;
++ }
+
+- mii->full_duplex = duplex;
++ return 0;
+
+- /* Let the MAC know about the new link state */
+- macb_set_media(bp, media);
++err_out_unregister_bus:
++ mdiobus_unregister(&bp->mii_bus);
++err_out_free_mdio_irq:
++ kfree(bp->mii_bus.irq);
++err_out:
++ return err;
+ }
+
+ static void macb_update_stats(struct macb *bp)
+@@ -265,16 +296,6 @@
+ *p += __raw_readl(reg);
+ }
+
+-static void macb_periodic_task(struct work_struct *work)
+-{
+- struct macb *bp = container_of(work, struct macb, periodic_task.work);
+-
+- macb_update_stats(bp);
+- macb_check_media(bp, 1, 0);
+-
+- schedule_delayed_work(&bp->periodic_task, HZ);
+-}
+-
+ static void macb_tx(struct macb *bp)
+ {
+ unsigned int tail;
+@@ -519,9 +540,6 @@
+ spin_lock(&bp->lock);
+
+ while (status) {
+- if (status & MACB_BIT(MFD))
+- complete(&bp->mdio_complete);
+-
+ /* close possible race with dev_close */
+ if (unlikely(!netif_running(dev))) {
+ macb_writel(bp, IDR, ~0UL);
+@@ -535,7 +553,8 @@
+ * until we have processed the buffers
+ */
+ macb_writel(bp, IDR, MACB_RX_INT_FLAGS);
+- dev_dbg(&bp->pdev->dev, "scheduling RX softirq\n");
++ dev_dbg(&bp->pdev->dev,
++ "scheduling RX softirq\n");
+ __netif_rx_schedule(dev);
+ }
+ }
+@@ -765,7 +784,7 @@
+ macb_writel(bp, TBQP, bp->tx_ring_dma);
+
+ /* Enable TX and RX */
+- macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE));
++ macb_writel(bp, NCR, MACB_BIT(RE) | MACB_BIT(TE) | MACB_BIT(MPE));
+
+ /* Enable interrupts */
+ macb_writel(bp, IER, (MACB_BIT(RCOMP)
+@@ -776,18 +795,7 @@
+ | MACB_BIT(TCOMP)
+ | MACB_BIT(ISR_ROVR)
+ | MACB_BIT(HRESP)));
+-}
+-
+-static void macb_init_phy(struct net_device *dev)
+-{
+- struct macb *bp = netdev_priv(dev);
+
+- /* Set some reasonable default settings */
+- macb_mdio_write(dev, bp->mii.phy_id, MII_ADVERTISE,
+- ADVERTISE_CSMA | ADVERTISE_ALL);
+- macb_mdio_write(dev, bp->mii.phy_id, MII_BMCR,
+- (BMCR_SPEED100 | BMCR_ANENABLE
+- | BMCR_ANRESTART | BMCR_FULLDPLX));
+ }
+
+ static int macb_open(struct net_device *dev)
+@@ -797,6 +805,10 @@
+
+ dev_dbg(&bp->pdev->dev, "open\n");
+
++ /* if the phy is not yet register, retry later*/
++ if (!bp->phy_dev)
++ return -EAGAIN;
++
+ if (!is_valid_ether_addr(dev->dev_addr))
+ return -EADDRNOTAVAIL;
+
+@@ -810,12 +822,11 @@
+
+ macb_init_rings(bp);
+ macb_init_hw(bp);
+- macb_init_phy(dev);
+
+- macb_check_media(bp, 1, 1);
+- netif_start_queue(dev);
++ /* schedule a link state check */
++ phy_start(bp->phy_dev);
+
+- schedule_delayed_work(&bp->periodic_task, HZ);
++ netif_start_queue(dev);
+
+ return 0;
+ }
+@@ -825,10 +836,11 @@
+ struct macb *bp = netdev_priv(dev);
+ unsigned long flags;
+
+- cancel_rearming_delayed_work(&bp->periodic_task);
+-
+ netif_stop_queue(dev);
+
++ if (bp->phy_dev)
++ phy_stop(bp->phy_dev);
++
+ spin_lock_irqsave(&bp->lock, flags);
+ macb_reset_hw(bp);
+ netif_carrier_off(dev);
+@@ -845,6 +857,9 @@
+ struct net_device_stats *nstat = &bp->stats;
+ struct macb_stats *hwstat = &bp->hw_stats;
+
++ /* read stats from hardware */
++ macb_update_stats(bp);
++
+ /* Convert HW stats into netdevice stats */
+ nstat->rx_errors = (hwstat->rx_fcs_errors +
+ hwstat->rx_align_errors +
+@@ -882,18 +897,27 @@
+ static int macb_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct macb *bp = netdev_priv(dev);
++ struct phy_device *phydev = bp->phy_dev;
+
+- return mii_ethtool_gset(&bp->mii, cmd);
++ if (!phydev)
++ return -ENODEV;
++
++ return phy_ethtool_gset(phydev, cmd);
+ }
+
+ static int macb_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+ {
+ struct macb *bp = netdev_priv(dev);
++ struct phy_device *phydev = bp->phy_dev;
++
++ if (!phydev)
++ return -ENODEV;
+
+- return mii_ethtool_sset(&bp->mii, cmd);
++ return phy_ethtool_sset(phydev, cmd);
+ }
+
+-static void macb_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
++static void macb_get_drvinfo(struct net_device *dev,
++ struct ethtool_drvinfo *info)
+ {
+ struct macb *bp = netdev_priv(dev);
+
+@@ -902,104 +926,34 @@
+ strcpy(info->bus_info, bp->pdev->dev.bus_id);
+ }
+
+-static int macb_nway_reset(struct net_device *dev)
+-{
+- struct macb *bp = netdev_priv(dev);
+- return mii_nway_restart(&bp->mii);
+-}
+-
+ static struct ethtool_ops macb_ethtool_ops = {
+ .get_settings = macb_get_settings,
+ .set_settings = macb_set_settings,
+ .get_drvinfo = macb_get_drvinfo,
+- .nway_reset = macb_nway_reset,
+ .get_link = ethtool_op_get_link,
+ };
+
+ static int macb_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+ {
+ struct macb *bp = netdev_priv(dev);
++ struct phy_device *phydev = bp->phy_dev;
+
+ if (!netif_running(dev))
+ return -EINVAL;
+
+- return generic_mii_ioctl(&bp->mii, if_mii(rq), cmd, NULL);
+-}
+-
+-static ssize_t macb_mii_show(const struct device *_dev, char *buf,
+- unsigned long addr)
+-{
+- struct net_device *dev = to_net_dev(_dev);
+- struct macb *bp = netdev_priv(dev);
+- ssize_t ret = -EINVAL;
+-
+- if (netif_running(dev)) {
+- int value;
+- value = macb_mdio_read(dev, bp->mii.phy_id, addr);
+- ret = sprintf(buf, "0x%04x\n", (uint16_t)value);
+- }
+-
+- return ret;
+-}
+-
+-#define MII_ENTRY(name, addr) \
+-static ssize_t show_##name(struct device *_dev, \
+- struct device_attribute *attr, \
+- char *buf) \
+-{ \
+- return macb_mii_show(_dev, buf, addr); \
+-} \
+-static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
+-
+-MII_ENTRY(bmcr, MII_BMCR);
+-MII_ENTRY(bmsr, MII_BMSR);
+-MII_ENTRY(physid1, MII_PHYSID1);
+-MII_ENTRY(physid2, MII_PHYSID2);
+-MII_ENTRY(advertise, MII_ADVERTISE);
+-MII_ENTRY(lpa, MII_LPA);
+-MII_ENTRY(expansion, MII_EXPANSION);
+-
+-static struct attribute *macb_mii_attrs[] = {
+- &dev_attr_bmcr.attr,
+- &dev_attr_bmsr.attr,
+- &dev_attr_physid1.attr,
+- &dev_attr_physid2.attr,
+- &dev_attr_advertise.attr,
+- &dev_attr_lpa.attr,
+- &dev_attr_expansion.attr,
+- NULL,
+-};
+-
+-static struct attribute_group macb_mii_group = {
+- .name = "mii",
+- .attrs = macb_mii_attrs,
+-};
+-
+-static void macb_unregister_sysfs(struct net_device *net)
+-{
+- struct device *_dev = &net->dev;
++ if (!phydev)
++ return -ENODEV;
+
+- sysfs_remove_group(&_dev->kobj, &macb_mii_group);
++ return phy_mii_ioctl(phydev, if_mii(rq), cmd);
+ }
+
+-static int macb_register_sysfs(struct net_device *net)
+-{
+- struct device *_dev = &net->dev;
+- int ret;
+-
+- ret = sysfs_create_group(&_dev->kobj, &macb_mii_group);
+- if (ret)
+- printk(KERN_WARNING
+- "%s: sysfs mii attribute registration failed: %d\n",
+- net->name, ret);
+- return ret;
+-}
+ static int __devinit macb_probe(struct platform_device *pdev)
+ {
+ struct eth_platform_data *pdata;
+ struct resource *regs;
+ struct net_device *dev;
+ struct macb *bp;
++ struct phy_device *phydev;
+ unsigned long pclk_hz;
+ u32 config;
+ int err = -ENXIO;
+@@ -1080,10 +1034,6 @@
+
+ dev->base_addr = regs->start;
+
+- INIT_DELAYED_WORK(&bp->periodic_task, macb_periodic_task);
+- mutex_init(&bp->mdio_mutex);
+- init_completion(&bp->mdio_complete);
+-
+ /* Set MII management clock divider */
+ pclk_hz = clk_get_rate(bp->pclk);
+ if (pclk_hz <= 20000000)
+@@ -1096,20 +1046,9 @@
+ config = MACB_BF(CLK, MACB_CLK_DIV64);
+ macb_writel(bp, NCFGR, config);
+
+- bp->mii.dev = dev;
+- bp->mii.mdio_read = macb_mdio_read;
+- bp->mii.mdio_write = macb_mdio_write;
+- bp->mii.phy_id_mask = 0x1f;
+- bp->mii.reg_num_mask = 0x1f;
+-
+ macb_get_hwaddr(bp);
+- err = macb_phy_probe(bp);
+- if (err) {
+- dev_err(&pdev->dev, "Failed to detect PHY, aborting.\n");
+- goto err_out_free_irq;
+- }
+-
+ pdata = pdev->dev.platform_data;
++
+ if (pdata && pdata->is_rmii)
+ #if defined(CONFIG_ARCH_AT91)
+ macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
+@@ -1131,9 +1070,11 @@
+ goto err_out_free_irq;
+ }
+
+- platform_set_drvdata(pdev, dev);
++ if (macb_mii_init(bp) != 0) {
++ goto err_out_unregister_netdev;
++ }
+
+- macb_register_sysfs(dev);
++ platform_set_drvdata(pdev, dev);
+
+ printk(KERN_INFO "%s: Atmel MACB at 0x%08lx irq %d "
+ "(%02x:%02x:%02x:%02x:%02x:%02x)\n",
+@@ -1141,8 +1082,15 @@
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+
++ phydev = bp->phy_dev;
++ printk(KERN_INFO "%s: attached PHY driver [%s] "
++ "(mii_bus:phy_addr=%s, irq=%d)\n",
++ dev->name, phydev->drv->name, phydev->dev.bus_id, phydev->irq);
++
+ return 0;
+
++err_out_unregister_netdev:
++ unregister_netdev(dev);
+ err_out_free_irq:
+ free_irq(dev->irq, dev);
+ err_out_iounmap:
+@@ -1153,7 +1101,9 @@
+ clk_put(bp->hclk);
+ #endif
+ clk_disable(bp->pclk);
++#ifndef CONFIG_ARCH_AT91
+ err_out_put_pclk:
++#endif
+ clk_put(bp->pclk);
+ err_out_free_dev:
+ free_netdev(dev);
+@@ -1171,7 +1121,8 @@
+
+ if (dev) {
+ bp = netdev_priv(dev);
+- macb_unregister_sysfs(dev);
++ mdiobus_unregister(&bp->mii_bus);
++ kfree(bp->mii_bus.irq);
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+ iounmap(bp->regs);
+diff -x .git -Nur linux-2.6.22.1/drivers/net/macb.h linux-avr32.git/drivers/net/macb.h
+--- linux-2.6.22.1/drivers/net/macb.h 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/net/macb.h 2007-07-12 14:00:04.000000000 +0200
+@@ -383,11 +383,11 @@
+
+ unsigned int rx_pending, tx_pending;
+
+- struct delayed_work periodic_task;
+-
+- struct mutex mdio_mutex;
+- struct completion mdio_complete;
+- struct mii_if_info mii;
++ struct mii_bus mii_bus;
++ struct phy_device *phy_dev;
++ unsigned int link;
++ unsigned int speed;
++ unsigned int duplex;
+ };
+
+ #endif /* _MACB_H */
+diff -x .git -Nur linux-2.6.22.1/drivers/rtc/Kconfig linux-avr32.git/drivers/rtc/Kconfig
+--- linux-2.6.22.1/drivers/rtc/Kconfig 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/rtc/Kconfig 2007-07-12 14:00:13.000000000 +0200
+@@ -379,6 +379,13 @@
+ To compile this driver as a module, choose M here: the
+ module will be called rtc-pl031.
+
++config RTC_DRV_AT32AP700X
++ tristate "AT32AP700X series RTC"
++ depends on RTC_CLASS && PLATFORM_AT32AP
++ help
++ Driver for the internal RTC (Realtime Clock) on Atmel AVR32
++ AT32AP700x family processors.
++
+ config RTC_DRV_AT91RM9200
+ tristate "AT91RM9200"
+ depends on RTC_CLASS && ARCH_AT91RM9200
+diff -x .git -Nur linux-2.6.22.1/drivers/rtc/Makefile linux-avr32.git/drivers/rtc/Makefile
+--- linux-2.6.22.1/drivers/rtc/Makefile 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/rtc/Makefile 2007-07-12 14:00:13.000000000 +0200
+@@ -19,6 +19,7 @@
+ obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o
+ obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o
+ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o
++obj-$(CONFIG_RTC_DRV_AT32AP700X) += rtc-at32ap700x.o
+ obj-$(CONFIG_RTC_DRV_DS1307) += rtc-ds1307.o
+ obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o
+ obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o
+diff -x .git -Nur linux-2.6.22.1/drivers/rtc/rtc-at32ap700x.c linux-avr32.git/drivers/rtc/rtc-at32ap700x.c
+--- linux-2.6.22.1/drivers/rtc/rtc-at32ap700x.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/drivers/rtc/rtc-at32ap700x.c 2007-07-12 14:00:13.000000000 +0200
+@@ -0,0 +1,337 @@
++/*
++ * An RTC driver for the AVR32 AT32AP700x processor series.
++ *
++ * Copyright (C) 2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify it
++ * under the terms of the GNU General Public License version 2 as published
++ * by the Free Software Foundation.
++ */
++
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/platform_device.h>
++#include <linux/rtc.h>
++#include <linux/io.h>
++
++/*
++ * This is a bare-bones RTC. It runs during most system sleep states, but has
++ * no battery backup and gets reset during system restart. It must be
++ * initialized from an external clock (network, I2C, etc) before it can be of
++ * much use.
++ *
++ * The alarm functionality is limited by the hardware, not supporting
++ * periodic interrupts.
++ */
++
++#define RTC_CTRL 0x00
++#define RTC_CTRL_EN 0
++#define RTC_CTRL_PCLR 1
++#define RTC_CTRL_TOPEN 2
++#define RTC_CTRL_PSEL 8
++
++#define RTC_VAL 0x04
++
++#define RTC_TOP 0x08
++
++#define RTC_IER 0x10
++#define RTC_IER_TOPI 0
++
++#define RTC_IDR 0x14
++#define RTC_IDR_TOPI 0
++
++#define RTC_IMR 0x18
++#define RTC_IMR_TOPI 0
++
++#define RTC_ISR 0x1c
++#define RTC_ISR_TOPI 0
++
++#define RTC_ICR 0x20
++#define RTC_ICR_TOPI 0
++
++#define RTC_BIT(name) (1 << RTC_##name)
++#define RTC_BF(name, value) ((value) << RTC_##name)
++
++#define rtc_readl(dev, reg) \
++ __raw_readl((dev)->regs + RTC_##reg)
++#define rtc_writel(dev, reg, value) \
++ __raw_writel((value), (dev)->regs + RTC_##reg)
++
++struct rtc_at32ap700x {
++ struct rtc_device *rtc;
++ void __iomem *regs;
++ unsigned long alarm_time;
++ unsigned long irq;
++ /* Protect against concurrent register access. */
++ spinlock_t lock;
++};
++
++static int at32_rtc_readtime(struct device *dev, struct rtc_time *tm)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ unsigned long now;
++
++ now = rtc_readl(rtc, VAL);
++ rtc_time_to_tm(now, tm);
++
++ return 0;
++}
++
++static int at32_rtc_settime(struct device *dev, struct rtc_time *tm)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ unsigned long now;
++ int ret;
++
++ ret = rtc_tm_to_time(tm, &now);
++ if (ret == 0)
++ rtc_writel(rtc, VAL, now);
++
++ return ret;
++}
++
++static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++
++ rtc_time_to_tm(rtc->alarm_time, &alrm->time);
++ alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0;
++
++ return 0;
++}
++
++static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ unsigned long rtc_unix_time;
++ unsigned long alarm_unix_time;
++ int ret;
++
++ rtc_unix_time = rtc_readl(rtc, VAL);
++
++ /* RTC does only support one alarm time, not periodic */
++ if (alrm->time.tm_mday <= 0) {
++ struct rtc_time tm;
++ unsigned long then;
++
++ rtc_time_to_tm(rtc_unix_time, &tm);
++
++ alrm->time.tm_mday = tm.tm_mday;
++ alrm->time.tm_mon = tm.tm_mon;
++ alrm->time.tm_year = tm.tm_year;
++
++ rtc_tm_to_time(&alrm->time, &then);
++
++ /* check if the alarm wraps into tomorrow */
++ if (then < rtc_unix_time) {
++ rtc_time_to_tm(rtc_unix_time + 24 * 60 * 60, &tm);
++ alrm->time.tm_mday = tm.tm_mday;
++ alrm->time.tm_mon = tm.tm_mon;
++ alrm->time.tm_year = tm.tm_year;
++ }
++ }
++
++ ret = rtc_tm_to_time(&alrm->time, &alarm_unix_time);
++ if (ret)
++ return ret;
++
++ if (alarm_unix_time < rtc_unix_time)
++ return -EINVAL;
++
++ spin_lock_irq(&rtc->lock);
++ rtc->alarm_time = alarm_unix_time;
++ rtc_writel(rtc, TOP, rtc->alarm_time);
++ if (alrm->pending)
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ | RTC_BIT(CTRL_TOPEN));
++ else
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ & ~RTC_BIT(CTRL_TOPEN));
++ spin_unlock_irq(&rtc->lock);
++
++ return ret;
++}
++
++static int at32_rtc_ioctl(struct device *dev, unsigned int cmd,
++ unsigned long arg)
++{
++ struct rtc_at32ap700x *rtc = dev_get_drvdata(dev);
++ int ret = 0;
++
++ spin_lock_irq(&rtc->lock);
++
++ switch (cmd) {
++ case RTC_AIE_ON:
++ if (rtc_readl(rtc, VAL) > rtc->alarm_time) {
++ ret = -EINVAL;
++ break;
++ }
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ | RTC_BIT(CTRL_TOPEN));
++ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
++ rtc_writel(rtc, IER, RTC_BIT(IER_TOPI));
++ break;
++ case RTC_AIE_OFF:
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ & ~RTC_BIT(CTRL_TOPEN));
++ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
++ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
++ break;
++ default:
++ ret = -ENOIOCTLCMD;
++ break;
++ }
++
++ spin_unlock_irq(&rtc->lock);
++
++ return ret;
++}
++
++static irqreturn_t at32_rtc_interrupt(int irq, void *dev_id)
++{
++ struct rtc_at32ap700x *rtc = (struct rtc_at32ap700x *)dev_id;
++ unsigned long isr = rtc_readl(rtc, ISR);
++ unsigned long events = 0;
++ int ret = IRQ_NONE;
++
++ spin_lock(&rtc->lock);
++
++ if (isr & RTC_BIT(ISR_TOPI)) {
++ rtc_writel(rtc, ICR, RTC_BIT(ICR_TOPI));
++ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
++ rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL)
++ & ~RTC_BIT(CTRL_TOPEN));
++ rtc_writel(rtc, VAL, rtc->alarm_time);
++ events = RTC_AF | RTC_IRQF;
++ rtc_update_irq(rtc->rtc, 1, events);
++ ret = IRQ_HANDLED;
++ }
++
++ spin_unlock(&rtc->lock);
++
++ return ret;
++}
++
++static struct rtc_class_ops at32_rtc_ops = {
++ .ioctl = at32_rtc_ioctl,
++ .read_time = at32_rtc_readtime,
++ .set_time = at32_rtc_settime,
++ .read_alarm = at32_rtc_readalarm,
++ .set_alarm = at32_rtc_setalarm,
++};
++
++static int __init at32_rtc_probe(struct platform_device *pdev)
++{
++ struct resource *regs;
++ struct rtc_at32ap700x *rtc;
++ int irq = -1;
++ int ret;
++
++ rtc = kzalloc(sizeof(struct rtc_at32ap700x), GFP_KERNEL);
++ if (!rtc) {
++ dev_dbg(&pdev->dev, "out of memory\n");
++ return -ENOMEM;
++ }
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ if (!regs) {
++ dev_dbg(&pdev->dev, "no mmio resource defined\n");
++ ret = -ENXIO;
++ goto out;
++ }
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0) {
++ dev_dbg(&pdev->dev, "could not get irq\n");
++ ret = -ENXIO;
++ goto out;
++ }
++
++ ret = request_irq(irq, at32_rtc_interrupt, IRQF_SHARED, "rtc", rtc);
++ if (ret) {
++ dev_dbg(&pdev->dev, "could not request irq %d\n", irq);
++ goto out;
++ }
++
++ rtc->irq = irq;
++ rtc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!rtc->regs) {
++ ret = -ENOMEM;
++ dev_dbg(&pdev->dev, "could not map I/O memory\n");
++ goto out_free_irq;
++ }
++ spin_lock_init(&rtc->lock);
++
++ /*
++ * Maybe init RTC: count from zero at 1 Hz, disable wrap irq.
++ *
++ * Do not reset VAL register, as it can hold an old time
++ * from last JTAG reset.
++ */
++ if (!(rtc_readl(rtc, CTRL) & RTC_BIT(CTRL_EN))) {
++ rtc_writel(rtc, CTRL, RTC_BIT(CTRL_PCLR));
++ rtc_writel(rtc, IDR, RTC_BIT(IDR_TOPI));
++ rtc_writel(rtc, CTRL, RTC_BF(CTRL_PSEL, 0xe)
++ | RTC_BIT(CTRL_EN));
++ }
++
++ rtc->rtc = rtc_device_register(pdev->name, &pdev->dev,
++ &at32_rtc_ops, THIS_MODULE);
++ if (IS_ERR(rtc->rtc)) {
++ dev_dbg(&pdev->dev, "could not register rtc device\n");
++ ret = PTR_ERR(rtc->rtc);
++ goto out_iounmap;
++ }
++
++ platform_set_drvdata(pdev, rtc);
++
++ dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
++ (unsigned long)rtc->regs, rtc->irq);
++
++ return 0;
++
++out_iounmap:
++ iounmap(rtc->regs);
++out_free_irq:
++ free_irq(irq, rtc);
++out:
++ kfree(rtc);
++ return ret;
++}
++
++static int __exit at32_rtc_remove(struct platform_device *pdev)
++{
++ struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
++
++ free_irq(rtc->irq, rtc);
++ iounmap(rtc->regs);
++ rtc_device_unregister(rtc->rtc);
++ kfree(rtc);
++ platform_set_drvdata(pdev, NULL);
++
++ return 0;
++}
++
++static struct platform_driver at32_rtc_driver = {
++ .remove = __exit_p(at32_rtc_remove),
++ .driver = {
++ .name = "rtc-at32ap700x",
++ .owner = THIS_MODULE,
++ },
++};
++
++static int __init at32_rtc_init(void)
++{
++ return platform_driver_probe(&at32_rtc_driver, at32_rtc_probe);
++}
++module_init(at32_rtc_init);
++
++static void __exit at32_rtc_exit(void)
++{
++ platform_driver_unregister(&at32_rtc_driver);
++}
++module_exit(at32_rtc_exit);
++
++MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
++MODULE_DESCRIPTION("Real time clock for AVR32 AT32AP700x");
++MODULE_LICENSE("GPL");
+diff -x .git -Nur linux-2.6.22.1/drivers/serial/atmel_serial.c linux-avr32.git/drivers/serial/atmel_serial.c
+--- linux-2.6.22.1/drivers/serial/atmel_serial.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/serial/atmel_serial.c 2007-06-06 11:33:59.000000000 +0200
@@ -114,6 +114,7 @@
struct uart_port uart; /* uart */
struct clk *clk; /* uart clock */
@@ -7312,74 +7468,10 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/serial/atmel_serial.c avr
// TODO: All reads to CSR will clear these interrupts!
if (pending & ATMEL_US_RIIC) port->icount.rng++;
-@@ -484,11 +512,16 @@
- unsigned long flags;
- unsigned int mode, imr, quot, baud;
-
-+ /* Get current mode register */
-+ mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
-+
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
-
-- /* Get current mode register */
-- mode = UART_GET_MR(port) & ~(ATMEL_US_CHRL | ATMEL_US_NBSTOP | ATMEL_US_PAR);
-+ if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
-+ quot /= 8;
-+ mode |= ATMEL_US_USCLKS_MCK_DIV8;
-+ }
-
- /* byte size */
- switch (termios->c_cflag & CSIZE) {
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/serial/atmel_serial.h avr32-git/drivers/serial/atmel_serial.h
---- linux-2.6.21.3/drivers/serial/atmel_serial.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/serial/atmel_serial.h 2007-06-06 11:33:59.000000000 +0200
-@@ -46,6 +46,9 @@
- #define ATMEL_US_USMODE_ISO7816_T1 6
- #define ATMEL_US_USMODE_IRDA 8
- #define ATMEL_US_USCLKS (3 << 4) /* Clock Selection */
-+#define ATMEL_US_USCLKS_MCK (0 << 4)
-+#define ATMEL_US_USCLKS_MCK_DIV8 (1 << 4)
-+#define ATMEL_US_USCLKS_SCK (3 << 4)
- #define ATMEL_US_CHRL (3 << 6) /* Character Length */
- #define ATMEL_US_CHRL_5 (0 << 6)
- #define ATMEL_US_CHRL_6 (1 << 6)
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/spi/atmel_spi.c avr32-git/drivers/spi/atmel_spi.c
---- linux-2.6.21.3/drivers/spi/atmel_spi.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/spi/atmel_spi.c 2007-06-06 11:33:59.000000000 +0200
-@@ -22,10 +22,7 @@
- #include <asm/io.h>
- #include <asm/arch/board.h>
- #include <asm/arch/gpio.h>
--
--#ifdef CONFIG_ARCH_AT91
- #include <asm/arch/cpu.h>
--#endif
-
- #include "atmel_spi.h"
-
-@@ -116,16 +113,16 @@
-
- len = as->remaining_bytes;
-
-- tx_dma = xfer->tx_dma;
-- rx_dma = xfer->rx_dma;
-+ tx_dma = xfer->tx_dma + xfer->len - len;
-+ rx_dma = xfer->rx_dma + xfer->len - len;
-
- /* use scratch buffer only when rx or tx data is unspecified */
-- if (rx_dma == INVALID_DMA_ADDRESS) {
-+ if (!xfer->rx_buf) {
- rx_dma = as->buffer_dma;
- if (len > BUFFER_SIZE)
- len = BUFFER_SIZE;
- }
-- if (tx_dma == INVALID_DMA_ADDRESS) {
-+ if (!xfer->tx_buf) {
- tx_dma = as->buffer_dma;
- if (len > BUFFER_SIZE)
- len = BUFFER_SIZE;
-@@ -415,8 +412,8 @@
+diff -x .git -Nur linux-2.6.22.1/drivers/spi/atmel_spi.c linux-avr32.git/drivers/spi/atmel_spi.c
+--- linux-2.6.22.1/drivers/spi/atmel_spi.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/spi/atmel_spi.c 2007-06-06 11:33:59.000000000 +0200
+@@ -412,8 +412,8 @@
csr |= SPI_BIT(NCPHA);
/* TODO: DLYBS and DLYBCT */
@@ -7390,776 +7482,2734 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/spi/atmel_spi.c avr32-git
/* chipselect must have been muxed as GPIO (e.g. in board setup) */
npcs_pin = (unsigned int)spi->controller_data;
-@@ -552,10 +549,8 @@
- goto out_free_buffer;
- as->irq = irq;
- as->clk = clk;
--#ifdef CONFIG_ARCH_AT91
- if (!cpu_is_at91rm9200())
- as->new_1 = 1;
--#endif
-
- ret = request_irq(irq, atmel_spi_interrupt, 0,
- pdev->dev.bus_id, master);
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/video/atmel_lcdfb.c avr32-git/drivers/video/atmel_lcdfb.c
---- linux-2.6.21.3/drivers/video/atmel_lcdfb.c 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/drivers/video/atmel_lcdfb.c 2007-06-06 11:34:00.000000000 +0200
-@@ -0,0 +1,752 @@
+diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.c linux-avr32.git/drivers/usb/gadget/atmel_usba_udc.c
+--- linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/drivers/usb/gadget/atmel_usba_udc.c 2007-07-12 14:00:19.000000000 +0200
+@@ -0,0 +1,2072 @@
+/*
-+ * Driver for AT91/AT32 LCD Controller
++ * Driver for the Atmel USBA high speed USB device controller
+ *
-+ * Copyright (C) 2007 Atmel Corporation
++ * Copyright (C) 2005-2007 Atmel Corporation
+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file COPYING in the main directory of this archive for
-+ * more details.
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
+ */
++/* #define DEBUG */
+
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/interrupt.h>
+#include <linux/clk.h>
-+#include <linux/fb.h>
++#include <linux/module.h>
+#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/io.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/list.h>
++#include <linux/platform_device.h>
++#include <linux/usb/ch9.h>
++#include <linux/usb_gadget.h>
+#include <linux/delay.h>
+
++#include <asm/gpio.h>
+#include <asm/arch/board.h>
-+#include <asm/arch/cpu.h>
-+#include <asm/arch/gpio.h>
+
-+#include <video/atmel_lcdc.h>
++#include "atmel_usba_udc.h"
++
++#define DMA_ADDR_INVALID (~(dma_addr_t)0)
++
++#define FIFO_IOMEM_ID 0
++#define CTRL_IOMEM_ID 1
++
++#ifdef DEBUG
++#define DBG_ERR 0x0001 /* report all error returns */
++#define DBG_HW 0x0002 /* debug hardware initialization */
++#define DBG_GADGET 0x0004 /* calls to/from gadget driver */
++#define DBG_INT 0x0008 /* interrupts */
++#define DBG_BUS 0x0010 /* report changes in bus state */
++#define DBG_QUEUE 0x0020 /* debug request queue processing */
++#define DBG_FIFO 0x0040 /* debug FIFO contents */
++#define DBG_DMA 0x0080 /* debug DMA handling */
++#define DBG_REQ 0x0100 /* print out queued request length */
++#define DBG_ALL 0xffff
++#define DBG_NONE 0x0000
++
++#define DEBUG_LEVEL (DBG_ERR)
++#define DBG(level, fmt, ...) \
++ do { \
++ if ((level) & DEBUG_LEVEL) \
++ printk(KERN_DEBUG "udc: " fmt, ## __VA_ARGS__); \
++ } while (0)
++#else
++#define DBG(level, fmt...)
++#endif
++
++static struct usba_udc the_udc;
+
-+#define lcdc_readl(sinfo, reg) __raw_readl((sinfo)->mmio+(reg))
-+#define lcdc_writel(sinfo, reg, val) __raw_writel((val), (sinfo)->mmio+(reg))
++#ifdef CONFIG_DEBUG_FS
++#include <linux/debugfs.h>
++#include <linux/uaccess.h>
+
-+/* configurable parameters */
-+#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
-+#define ATMEL_LCDC_DMA_BURST_LEN 8
++static int queue_dbg_open(struct inode *inode, struct file *file)
++{
++ struct usba_ep *ep = inode->i_private;
++ struct usba_request *req, *req_copy;
++ struct list_head *queue_data;
+
-+#if defined(CONFIG_ARCH_AT91SAM9263)
-+#define ATMEL_LCDC_FIFO_SIZE 2048
++ queue_data = kmalloc(sizeof(*queue_data), GFP_KERNEL);
++ if (!queue_data)
++ return -ENOMEM;
++ INIT_LIST_HEAD(queue_data);
++
++ spin_lock_irq(&ep->udc->lock);
++ list_for_each_entry(req, &ep->queue, queue) {
++ req_copy = kmalloc(sizeof(*req_copy), GFP_ATOMIC);
++ if (!req_copy)
++ goto fail;
++ memcpy(req_copy, req, sizeof(*req_copy));
++ list_add_tail(&req_copy->queue, queue_data);
++ }
++ spin_unlock_irq(&ep->udc->lock);
++
++ file->private_data = queue_data;
++ return 0;
++
++fail:
++ spin_unlock_irq(&ep->udc->lock);
++ list_for_each_entry_safe(req, req_copy, queue_data, queue) {
++ list_del(&req->queue);
++ kfree(req);
++ }
++ kfree(queue_data);
++ return -ENOMEM;
++}
++
++/*
++ * bbbbbbbb llllllll IZS sssss nnnn FDL\n\0
++ *
++ * b: buffer address
++ * l: buffer length
++ * I/i: interrupt/no interrupt
++ * Z/z: zero/no zero
++ * S/s: short ok/short not ok
++ * s: status
++ * n: nr_packets
++ * F/f: submitted/not submitted to FIFO
++ * D/d: using/not using DMA
++ * L/l: last transaction/not last transaction
++ */
++static ssize_t queue_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct list_head *queue = file->private_data;
++ struct usba_request *req, *tmp_req;
++ size_t len, remaining, actual = 0;
++ char tmpbuf[38];
++
++ if (!access_ok(VERIFY_WRITE, buf, nbytes))
++ return -EFAULT;
++
++ mutex_lock(&file->f_dentry->d_inode->i_mutex);
++ list_for_each_entry_safe(req, tmp_req, queue, queue) {
++ len = snprintf(tmpbuf, sizeof(tmpbuf),
++ "%8p %08x %c%c%c %5d %c%c%c\n",
++ req->req.buf, req->req.length,
++ req->req.no_interrupt ? 'i' : 'I',
++ req->req.zero ? 'Z' : 'z',
++ req->req.short_not_ok ? 's' : 'S',
++ req->req.status,
++ req->submitted ? 'F' : 'f',
++ req->using_dma ? 'D' : 'd',
++ req->last_transaction ? 'L' : 'l');
++ len = min(len, sizeof(tmpbuf));
++ if (len > nbytes)
++ break;
++
++ list_del(&req->queue);
++ kfree(req);
++
++ remaining = __copy_to_user(buf, tmpbuf, len);
++ actual += len - remaining;
++ if (remaining)
++ break;
++
++ nbytes -= len;
++ buf += len;
++ }
++ mutex_unlock(&file->f_dentry->d_inode->i_mutex);
++
++ return actual;
++}
++
++static int queue_dbg_release(struct inode *inode, struct file *file)
++{
++ struct list_head *queue_data = file->private_data;
++ struct usba_request *req, *tmp_req;
++
++ list_for_each_entry_safe(req, tmp_req, queue_data, queue) {
++ list_del(&req->queue);
++ kfree(req);
++ }
++ kfree(queue_data);
++ return 0;
++}
++
++static int regs_dbg_open(struct inode *inode, struct file *file)
++{
++ struct usba_udc *udc;
++ unsigned int i;
++ u32 *data;
++ int ret = -ENOMEM;
++
++ mutex_lock(&inode->i_mutex);
++ udc = inode->i_private;
++ data = kmalloc(inode->i_size, GFP_KERNEL);
++ if (!data)
++ goto out;
++
++ spin_lock_irq(&udc->lock);
++ for (i = 0; i < inode->i_size / 4; i++)
++ data[i] = __raw_readl(udc->regs + i * 4);
++ spin_unlock_irq(&udc->lock);
++
++ file->private_data = data;
++ ret = 0;
++
++out:
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static ssize_t regs_dbg_read(struct file *file, char __user *buf,
++ size_t nbytes, loff_t *ppos)
++{
++ struct inode *inode = file->f_dentry->d_inode;
++ int ret;
++
++ mutex_lock(&inode->i_mutex);
++ ret = simple_read_from_buffer(buf, nbytes, ppos,
++ file->private_data,
++ file->f_dentry->d_inode->i_size);
++ mutex_unlock(&inode->i_mutex);
++
++ return ret;
++}
++
++static int regs_dbg_release(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++const struct file_operations queue_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = queue_dbg_open,
++ .llseek = no_llseek,
++ .read = queue_dbg_read,
++ .release = queue_dbg_release,
++};
++
++const struct file_operations regs_dbg_fops = {
++ .owner = THIS_MODULE,
++ .open = regs_dbg_open,
++ .llseek = generic_file_llseek,
++ .read = regs_dbg_read,
++ .release = regs_dbg_release,
++};
++
++static void usba_ep_init_debugfs(struct usba_udc *udc,
++ struct usba_ep *ep)
++{
++ struct dentry *ep_root;
++
++ ep_root = debugfs_create_dir(ep_name(ep), udc->debugfs_root);
++ if (!ep_root)
++ goto err_root;
++ ep->debugfs_dir = ep_root;
++
++ ep->debugfs_queue = debugfs_create_file("queue", 0400, ep_root,
++ ep, &queue_dbg_fops);
++ if (!ep->debugfs_queue)
++ goto err_queue;
++
++ if (ep_can_dma(ep)) {
++ ep->debugfs_dma_status
++ = debugfs_create_u32("dma_status", 0400, ep_root,
++ &ep->last_dma_status);
++ if (!ep->debugfs_dma_status)
++ goto err_dma_status;
++ }
++ if (ep_is_control(ep)) {
++ ep->debugfs_state
++ = debugfs_create_u32("state", 0400, ep_root,
++ &ep->state);
++ if (!ep->debugfs_state)
++ goto err_state;
++ }
++
++ return;
++
++err_state:
++ if (ep_can_dma(ep))
++ debugfs_remove(ep->debugfs_dma_status);
++err_dma_status:
++ debugfs_remove(ep->debugfs_queue);
++err_queue:
++ debugfs_remove(ep_root);
++err_root:
++ dev_err(&ep->udc->pdev->dev,
++ "failed to create debugfs directory for %s\n", ep_name(ep));
++}
++
++static void usba_ep_cleanup_debugfs(struct usba_ep *ep)
++{
++ debugfs_remove(ep->debugfs_queue);
++ debugfs_remove(ep->debugfs_dma_status);
++ debugfs_remove(ep->debugfs_state);
++ debugfs_remove(ep->debugfs_dir);
++ ep->debugfs_dma_status = NULL;
++ ep->debugfs_dir = NULL;
++}
++
++static void usba_init_debugfs(struct usba_udc *udc)
++{
++ struct dentry *root, *regs;
++ struct resource *regs_resource;
++
++ root = debugfs_create_dir(udc->gadget.name, NULL);
++ if (IS_ERR(root) || !root)
++ goto err_root;
++ udc->debugfs_root = root;
++
++ regs = debugfs_create_file("regs", 0400, root, udc, &regs_dbg_fops);
++ if (!regs)
++ goto err_regs;
++
++ regs_resource = platform_get_resource(udc->pdev, IORESOURCE_MEM,
++ CTRL_IOMEM_ID);
++ regs->d_inode->i_size = regs_resource->end - regs_resource->start + 1;
++ udc->debugfs_regs = regs;
++
++ usba_ep_init_debugfs(udc, to_usba_ep(udc->gadget.ep0));
++
++ return;
++
++err_regs:
++ debugfs_remove(root);
++err_root:
++ udc->debugfs_root = NULL;
++ dev_err(&udc->pdev->dev, "debugfs is not available\n");
++}
++
++static void usba_cleanup_debugfs(struct usba_udc *udc)
++{
++ usba_ep_cleanup_debugfs(to_usba_ep(udc->gadget.ep0));
++ debugfs_remove(udc->debugfs_regs);
++ debugfs_remove(udc->debugfs_root);
++ udc->debugfs_regs = NULL;
++ udc->debugfs_root = NULL;
++}
+#else
-+#define ATMEL_LCDC_FIFO_SIZE 512
-+#endif
++static inline void usba_ep_init_debugfs(struct usba_udc *udc,
++ struct usba_ep *ep)
++{
+
-+#if defined(CONFIG_ARCH_AT91)
-+#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
++}
+
-+static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
-+ struct fb_var_screeninfo *var)
++static inline void usba_ep_cleanup_debugfs(struct usba_ep *ep)
+{
+
+}
-+#elif defined(CONFIG_AVR32)
-+#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
-+ | FBINFO_PARTIAL_PAN_OK \
-+ | FBINFO_HWACCEL_XPAN \
-+ | FBINFO_HWACCEL_YPAN)
+
-+static void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
-+ struct fb_var_screeninfo *var)
++static inline void usba_init_debugfs(struct usba_udc *udc)
+{
-+ u32 dma2dcfg;
-+ u32 pixeloff;
+
-+ pixeloff = (var->xoffset * var->bits_per_pixel) & 0x1f;
++}
+
-+ dma2dcfg = ((var->xres_virtual - var->xres) * var->bits_per_pixel) / 8;
-+ dma2dcfg |= pixeloff << ATMEL_LCDC_PIXELOFF_OFFSET;
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMA2DCFG, dma2dcfg);
++static inline void usba_cleanup_debugfs(struct usba_udc *udc)
++{
+
-+ /* Update configuration */
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON,
-+ lcdc_readl(sinfo, ATMEL_LCDC_DMACON)
-+ | ATMEL_LCDC_DMAUPDT);
+}
+#endif
+
++static int vbus_is_present(struct usba_udc *udc)
++{
++ if (udc->vbus_pin != -1)
++ return gpio_get_value(udc->vbus_pin);
++
++ /* No Vbus detection: Assume always present */
++ return 1;
++}
+
-+static struct fb_fix_screeninfo atmel_lcdfb_fix __initdata = {
-+ .type = FB_TYPE_PACKED_PIXELS,
-+ .visual = FB_VISUAL_TRUECOLOR,
-+ .xpanstep = 0,
-+ .ypanstep = 0,
-+ .ywrapstep = 0,
-+ .accel = FB_ACCEL_NONE,
-+};
++static void copy_to_fifo(void __iomem *fifo, const void *buf, int len)
++{
++ unsigned long tmp;
+
++ DBG(DBG_FIFO, "copy to FIFO (len %d):\n", len);
++ for (; len > 0; len -= 4, buf += 4, fifo += 4) {
++ tmp = *(unsigned long *)buf;
++ if (len >= 4) {
++ DBG(DBG_FIFO, " -> %08lx\n", tmp);
++ __raw_writel(tmp, fifo);
++ } else {
++ do {
++ DBG(DBG_FIFO, " -> %02lx\n", tmp >> 24);
++ __raw_writeb(tmp >> 24, fifo);
++ fifo++;
++ tmp <<= 8;
++ } while (--len);
++ break;
++ }
++ }
++}
+
-+static void atmel_lcdfb_update_dma(struct fb_info *info,
-+ struct fb_var_screeninfo *var)
++static void copy_from_fifo(void *buf, void __iomem *fifo, int len)
+{
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ struct fb_fix_screeninfo *fix = &info->fix;
-+ unsigned long dma_addr;
++ union {
++ unsigned long *w;
++ unsigned char *b;
++ } p;
++ unsigned long tmp;
+
-+ dma_addr = (fix->smem_start + var->yoffset * fix->line_length
-+ + var->xoffset * var->bits_per_pixel / 8);
++ DBG(DBG_FIFO, "copy from FIFO (len %d):\n", len);
++ for (p.w = buf; len > 0; len -= 4, p.w++, fifo += 4) {
++ if (len >= 4) {
++ tmp = __raw_readl(fifo);
++ *p.w = tmp;
++ DBG(DBG_FIFO, " -> %08lx\n", tmp);
++ } else {
++ do {
++ tmp = __raw_readb(fifo);
++ *p.b = tmp;
++ DBG(DBG_FIFO, " -> %02lx\n", tmp);
++ fifo++, p.b++;
++ } while (--len);
++ }
++ }
++}
+
-+ dma_addr &= ~3UL;
++static void next_fifo_transaction(struct usba_ep *ep,
++ struct usba_request *req)
++{
++ unsigned int transaction_len;
+
-+ /* Set framebuffer DMA base address and pixel offset */
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMABADDR1, dma_addr);
++ transaction_len = req->req.length - req->req.actual;
++ req->last_transaction = 1;
++ if (transaction_len > ep->ep.maxpacket) {
++ transaction_len = ep->ep.maxpacket;
++ req->last_transaction = 0;
++ } else if (transaction_len == ep->ep.maxpacket
++ && req->req.zero) {
++ req->last_transaction = 0;
++ }
++ DBG(DBG_QUEUE, "%s: submit_transaction, req %p (length %d)%s\n",
++ ep_name(ep), req, transaction_len,
++ req->last_transaction ? ", done" : "");
+
-+ atmel_lcdfb_update_dma2d(sinfo, var);
++ copy_to_fifo(ep->fifo, req->req.buf + req->req.actual, transaction_len);
++ usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
++ req->req.actual += transaction_len;
+}
+
-+static inline void atmel_lcdfb_free_video_memory(struct atmel_lcdfb_info *sinfo)
++static void submit_request(struct usba_ep *ep, struct usba_request *req)
+{
-+ struct fb_info *info = sinfo->info;
++ DBG(DBG_QUEUE, "%s: submit_request: req %p (length %d)\n",
++ ep_name(ep), req, req->req.length);
+
-+ dma_free_writecombine(info->device, info->fix.smem_len,
-+ info->screen_base, info->fix.smem_start);
++ req->req.actual = 0;
++ req->submitted = 1;
++
++ if (req->using_dma) {
++ if (req->req.length == 0) {
++ usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_PK_RDY));
++ return;
++ }
++
++ if (req->req.zero)
++ usba_ep_writel(ep, CTL_ENB, USBA_BIT(SHORT_PACKET));
++ else
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(SHORT_PACKET));
++
++ usba_dma_writel(ep, ADDRESS, req->req.dma);
++ usba_dma_writel(ep, CONTROL, req->ctrl);
++ } else {
++ next_fifo_transaction(ep, req);
++ if (req->last_transaction) {
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_PK_RDY));
++ usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_COMPLETE));
++ } else {
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
++ usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_PK_RDY));
++ }
++ }
+}
+
-+/**
-+ * atmel_lcdfb_alloc_video_memory - Allocate framebuffer memory
-+ * @sinfo: the frame buffer to allocate memory for
-+ */
-+static int atmel_lcdfb_alloc_video_memory(struct atmel_lcdfb_info *sinfo)
++static void submit_next_request(struct usba_ep *ep)
+{
-+ struct fb_info *info = sinfo->info;
-+ struct fb_var_screeninfo *var = &info->var;
++ struct usba_request *req;
+
-+ info->fix.smem_len = (var->xres_virtual * var->yres_virtual
-+ * ((var->bits_per_pixel + 7) / 8));
++ if (list_empty(&ep->queue)) {
++ usba_ep_writel(ep, CTL_DIS, (USBA_BIT(TX_PK_RDY)
++ | USBA_BIT(RX_BK_RDY)));
++ return;
++ }
+
-+ info->screen_base = dma_alloc_writecombine(info->device, info->fix.smem_len,
-+ (dma_addr_t *)&info->fix.smem_start, GFP_KERNEL);
++ req = list_entry(ep->queue.next, struct usba_request, queue);
++ if (!req->submitted)
++ submit_request(ep, req);
++}
+
-+ if (!info->screen_base) {
-+ return -ENOMEM;
++static void send_status(struct usba_udc *udc, struct usba_ep *ep)
++{
++ ep->state = STATUS_STAGE_IN;
++ usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
++ usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_COMPLETE));
++}
++
++static void receive_data(struct usba_ep *ep)
++{
++ struct usba_udc *udc = ep->udc;
++ struct usba_request *req;
++ unsigned long status;
++ unsigned int bytecount, nr_busy;
++ int is_complete = 0;
++
++ status = usba_ep_readl(ep, STA);
++ nr_busy = USBA_BFEXT(BUSY_BANKS, status);
++
++ DBG(DBG_QUEUE, "receive data: nr_busy=%u\n", nr_busy);
++
++ while (nr_busy > 0) {
++ if (list_empty(&ep->queue)) {
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
++ break;
++ }
++ req = list_entry(ep->queue.next,
++ struct usba_request, queue);
++
++ bytecount = USBA_BFEXT(BYTE_COUNT, status);
++
++ if (status & (1 << 31))
++ is_complete = 1;
++ if (req->req.actual + bytecount >= req->req.length) {
++ is_complete = 1;
++ bytecount = req->req.length - req->req.actual;
++ }
++
++ copy_from_fifo(req->req.buf + req->req.actual,
++ ep->fifo, bytecount);
++ req->req.actual += bytecount;
++
++ usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
++
++ if (is_complete) {
++ DBG(DBG_QUEUE, "%s: request done\n", ep_name(ep));
++ req->req.status = 0;
++ list_del_init(&req->queue);
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
++ req->req.complete(&ep->ep, &req->req);
++ }
++
++ status = usba_ep_readl(ep, STA);
++ nr_busy = USBA_BFEXT(BUSY_BANKS, status);
++
++ if (is_complete && ep_is_control(ep)) {
++ send_status(udc, ep);
++ break;
++ }
+ }
++}
+
-+ return 0;
++static void request_complete(struct usba_ep *ep,
++ struct usba_request *req,
++ int status)
++{
++ struct usba_udc *udc = ep->udc;
++
++ WARN_ON(!list_empty(&req->queue));
++
++ if (req->req.status == -EINPROGRESS)
++ req->req.status = status;
++
++ if (req->mapped) {
++ dma_unmap_single(
++ &udc->pdev->dev, req->req.dma, req->req.length,
++ ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
++ req->req.dma = DMA_ADDR_INVALID;
++ req->mapped = 0;
++ }
++
++ DBG(DBG_GADGET | DBG_REQ,
++ "%s: req %p complete: status %d, actual %u\n",
++ ep_name(ep), req, req->req.status, req->req.actual);
++ req->req.complete(&ep->ep, &req->req);
+}
+
-+/**
-+ * atmel_lcdfb_check_var - Validates a var passed in.
-+ * @var: frame buffer variable screen structure
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Checks to see if the hardware supports the state requested by
-+ * var passed in. This function does not alter the hardware
-+ * state!!! This means the data stored in struct fb_info and
-+ * struct atmel_lcdfb_info do not change. This includes the var
-+ * inside of struct fb_info. Do NOT change these. This function
-+ * can be called on its own if we intent to only test a mode and
-+ * not actually set it. The stuff in modedb.c is a example of
-+ * this. If the var passed in is slightly off by what the
-+ * hardware can support then we alter the var PASSED in to what
-+ * we can do. If the hardware doesn't support mode change a
-+ * -EINVAL will be returned by the upper layers. You don't need
-+ * to implement this function then. If you hardware doesn't
-+ * support changing the resolution then this function is not
-+ * needed. In this case the driver would just provide a var that
-+ * represents the static state the screen is in.
-+ *
-+ * Returns negative errno on error, or zero on success.
-+ */
-+static int atmel_lcdfb_check_var(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
++static void request_complete_list(struct usba_ep *ep,
++ struct list_head *list,
++ int status)
++{
++ struct usba_request *req, *tmp_req;
++
++ list_for_each_entry_safe(req, tmp_req, list, queue) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, status);
++ }
++}
++
++static int usba_ep_enable(struct usb_ep *_ep,
++ const struct usb_endpoint_descriptor *desc)
+{
-+ struct device *dev = info->device;
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned long clk_value_khz;
++ struct usba_ep *ep = to_usba_ep(_ep);
++ struct usba_udc *udc = ep->udc;
++ unsigned long flags, ept_cfg, maxpacket;
+
-+ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
++ DBG(DBG_GADGET, "%s: ep_enable: desc=%p\n", ep_name(ep), desc);
+
-+ dev_dbg(dev, "%s:\n", __func__);
-+ dev_dbg(dev, " resolution: %ux%u\n", var->xres, var->yres);
-+ dev_dbg(dev, " pixclk: %lu KHz\n", PICOS2KHZ(var->pixclock));
-+ dev_dbg(dev, " bpp: %u\n", var->bits_per_pixel);
-+ dev_dbg(dev, " clk: %lu KHz\n", clk_value_khz);
++ maxpacket = le16_to_cpu(desc->wMaxPacketSize);
+
-+ if ((PICOS2KHZ(var->pixclock) * var->bits_per_pixel / 8) > clk_value_khz) {
-+ dev_err(dev, "%lu KHz pixel clock is too fast\n", PICOS2KHZ(var->pixclock));
++ if (ep->index == 0
++ || desc->bDescriptorType != USB_DT_ENDPOINT
++ || ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK)
++ != ep->index)
++ || maxpacket == 0
++ || maxpacket > ep->fifo_size) {
++ DBG(DBG_ERR, "ep_enable: Invalid argument");
+ return -EINVAL;
+ }
+
-+ /* Force same alignment for each line */
-+ var->xres = (var->xres + 3) & ~3UL;
-+ var->xres_virtual = (var->xres_virtual + 3) & ~3UL;
++ ep->is_isoc = 0;
++ ep->is_in = 0;
++
++ if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
++ == USB_ENDPOINT_XFER_ISOC) {
++ if (!ep->can_isoc) {
++ DBG(DBG_ERR, "ep_enable: %s is not isoc capable\n",
++ ep_name(ep));
++ return -EINVAL;
++ }
++ ep->is_isoc = 1;
++ }
+
-+ var->red.msb_right = var->green.msb_right = var->blue.msb_right = 0;
-+ var->transp.msb_right = 0;
-+ var->transp.offset = var->transp.length = 0;
-+ var->xoffset = var->yoffset = 0;
++ if (maxpacket <= 8)
++ ept_cfg = USBA_BF(EPT_SIZE, USBA_EPT_SIZE_8);
++ else
++ /* LSB is bit 1, not 0 */
++ ept_cfg = USBA_BF(EPT_SIZE, fls(maxpacket - 1) - 3);
++ DBG(DBG_HW, "%s: EPT_SIZE = %lu (maxpacket = %lu)\n",
++ ep_name(ep), ept_cfg, maxpacket);
++
++ if ((desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) == USB_DIR_IN) {
++ ep->is_in = 1;
++ ept_cfg |= USBA_BIT(EPT_DIR);
++ }
+
-+ switch (var->bits_per_pixel) {
-+ case 2:
-+ case 4:
-+ case 8:
-+ var->red.offset = var->green.offset = var->blue.offset = 0;
-+ var->red.length = var->green.length = var->blue.length
-+ = var->bits_per_pixel;
++ switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {
++ case USB_ENDPOINT_XFER_CONTROL:
++ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL);
+ break;
-+ case 15:
-+ case 16:
-+ var->red.offset = 0;
-+ var->green.offset = 5;
-+ var->blue.offset = 10;
-+ var->red.length = var->green.length = var->blue.length = 5;
++ case USB_ENDPOINT_XFER_ISOC:
++ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_ISO);
+ break;
-+ case 24:
-+ case 32:
-+ var->red.offset = 0;
-+ var->green.offset = 8;
-+ var->blue.offset = 16;
-+ var->red.length = var->green.length = var->blue.length = 8;
++ case USB_ENDPOINT_XFER_BULK:
++ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK);
+ break;
-+ default:
-+ dev_err(dev, "color depth %d not supported\n",
-+ var->bits_per_pixel);
-+ return -EINVAL;
++ case USB_ENDPOINT_XFER_INT:
++ ept_cfg |= USBA_BF(EPT_TYPE, USBA_EPT_TYPE_INT);
++ break;
++ }
++ ept_cfg |= USBA_BF(BK_NUMBER, ep->nr_banks);
++
++ spin_lock_irqsave(&ep->udc->lock, flags);
++
++ if (ep->desc) {
++ spin_unlock_irqrestore(&ep->udc->lock, flags);
++ DBG(DBG_ERR, "ep%d already enabled\n", ep->index);
++ return -EBUSY;
+ }
+
++ ep->desc = desc;
++ ep->ep.maxpacket = maxpacket;
++
++ usba_ep_writel(ep, CFG, ept_cfg);
++ usba_ep_writel(ep, CTL_ENB, USBA_BIT(EPT_ENABLE));
++
++ if (ep_can_dma(ep)) {
++ u32 ctrl;
++
++ usba_writel(udc, INT_ENB,
++ (usba_readl(udc, INT_ENB)
++ | USBA_BF(EPT_INT, 1 << ep->index)
++ | USBA_BF(DMA_INT, 1 << ep->index)));
++ ctrl = USBA_BIT(AUTO_VALID) | USBA_BIT(INTDIS_DMA);
++ usba_ep_writel(ep, CTL_ENB, ctrl);
++ } else {
++ usba_writel(udc, INT_ENB,
++ (usba_readl(udc, INT_ENB)
++ | USBA_BF(EPT_INT, 1 << ep->index)));
++ }
++
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ DBG(DBG_HW, "EPT_CFG%d after init: %#08lx\n", ep->index,
++ (unsigned long)usba_ep_readl(ep, CFG));
++ DBG(DBG_HW, "INT_ENB after init: %#08lx\n",
++ (unsigned long)usba_readl(udc, INT_ENB));
++
+ return 0;
+}
+
-+/**
-+ * atmel_lcdfb_set_par - Alters the hardware state.
-+ * @info: frame buffer structure that represents a single frame buffer
-+ *
-+ * Using the fb_var_screeninfo in fb_info we set the resolution
-+ * of the this particular framebuffer. This function alters the
-+ * par AND the fb_fix_screeninfo stored in fb_info. It doesn't
-+ * not alter var in fb_info since we are using that data. This
-+ * means we depend on the data in var inside fb_info to be
-+ * supported by the hardware. atmel_lcdfb_check_var is always called
-+ * before atmel_lcdfb_set_par to ensure this. Again if you can't
-+ * change the resolution you don't need this function.
-+ *
-+ */
-+static int atmel_lcdfb_set_par(struct fb_info *info)
++static int usba_ep_disable(struct usb_ep *_ep)
+{
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned long value;
-+ unsigned long clk_value_khz;
++ struct usba_ep *ep = to_usba_ep(_ep);
++ struct usba_udc *udc = ep->udc;
++ LIST_HEAD(req_list);
++ unsigned long flags;
+
-+ dev_dbg(info->device, "%s:\n", __func__);
-+ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
-+ info->var.xres, info->var.yres,
-+ info->var.xres_virtual, info->var.yres_virtual);
++ DBG(DBG_GADGET, "ep_disable: %s\n", ep_name(ep));
+
-+ /* Turn off the LCD controller and the DMA controller */
-+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON, sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET);
++ spin_lock_irqsave(&udc->lock, flags);
+
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
++ if (!ep->desc) {
++ spin_unlock_irqrestore(&udc->lock, flags);
++ DBG(DBG_ERR, "ep_disable: %s not enabled\n",
++ ep_name(ep));
++ return -EINVAL;
++ }
++ ep->desc = NULL;
+
-+ if (info->var.bits_per_pixel <= 8)
-+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
-+ else
-+ info->fix.visual = FB_VISUAL_TRUECOLOR;
++ list_splice_init(&ep->queue, &req_list);
++ if (ep_can_dma(ep)) {
++ usba_dma_writel(ep, CONTROL, 0);
++ usba_dma_writel(ep, ADDRESS, 0);
++ usba_dma_readl(ep, STATUS);
++ }
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(EPT_ENABLE));
++ usba_writel(udc, INT_ENB, (usba_readl(udc, INT_ENB)
++ & ~USBA_BF(EPT_INT, 1 << ep->index)));
+
-+ info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
++ spin_unlock_irqrestore(&udc->lock, flags);
+
-+ /* Re-initialize the DMA engine... */
-+ dev_dbg(info->device, " * update DMA engine\n");
-+ atmel_lcdfb_update_dma(info, &info->var);
++ request_complete_list(ep, &req_list, -ESHUTDOWN);
+
-+ /* ...set frame size and burst length = 8 words (?) */
-+ value = (info->var.yres * info->var.xres * info->var.bits_per_pixel) / 32;
-+ value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET);
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMAFRMCFG, value);
++ return 0;
++}
+
-+ /* Now, the LCDC core... */
++static struct usb_request *
++usba_ep_alloc_request(struct usb_ep *_ep, unsigned gfp_flags)
++{
++ struct usba_request *req;
+
-+ /* Set pixel clock */
-+ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
++ DBG(DBG_GADGET, "ep_alloc_request: %p, 0x%x\n", _ep, gfp_flags);
+
-+ value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
++ req = kzalloc(sizeof(*req), gfp_flags);
++ if (!req)
++ return NULL;
+
-+ if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
-+ value++;
++ INIT_LIST_HEAD(&req->queue);
++ req->req.dma = DMA_ADDR_INVALID;
+
-+ value = (value / 2) - 1;
++ return &req->req;
++}
+
-+ if (value <= 0) {
-+ dev_notice(info->device, "Bypassing pixel clock divider\n");
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
-+ } else
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
-+
-+ /* Initialize control register 2 */
-+ value = sinfo->default_lcdcon2;
-+
-+ if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
-+ value |= ATMEL_LCDC_INVLINE_INVERTED;
-+ if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
-+ value |= ATMEL_LCDC_INVFRAME_INVERTED;
-+
-+ switch (info->var.bits_per_pixel) {
-+ case 1: value |= ATMEL_LCDC_PIXELSIZE_1; break;
-+ case 2: value |= ATMEL_LCDC_PIXELSIZE_2; break;
-+ case 4: value |= ATMEL_LCDC_PIXELSIZE_4; break;
-+ case 8: value |= ATMEL_LCDC_PIXELSIZE_8; break;
-+ case 15: /* fall through */
-+ case 16: value |= ATMEL_LCDC_PIXELSIZE_16; break;
-+ case 24: value |= ATMEL_LCDC_PIXELSIZE_24; break;
-+ case 32: value |= ATMEL_LCDC_PIXELSIZE_32; break;
-+ default: BUG(); break;
-+ }
-+ dev_dbg(info->device, " * LCDCON2 = %08lx\n", value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON2, value);
-+
-+ /* Vertical timing */
-+ value = (info->var.vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET;
-+ value |= info->var.upper_margin << ATMEL_LCDC_VBP_OFFSET;
-+ value |= info->var.lower_margin;
-+ dev_dbg(info->device, " * LCDTIM1 = %08lx\n", value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_TIM1, value);
-+
-+ /* Horizontal timing */
-+ value = (info->var.right_margin - 1) << ATMEL_LCDC_HFP_OFFSET;
-+ value |= (info->var.hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET;
-+ value |= (info->var.left_margin - 1);
-+ dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
-+
-+ /* Display size */
-+ value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
-+ value |= info->var.yres - 1;
-+ lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
-+
-+ /* FIFO Threshold: Use formula from data sheet */
-+ value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3);
-+ lcdc_writel(sinfo, ATMEL_LCDC_FIFO, value);
-+
-+ /* Toggle LCD_MODE every frame */
-+ lcdc_writel(sinfo, ATMEL_LCDC_MVAL, 0);
-+
-+ /* Disable all interrupts */
-+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, ~0UL);
-+
-+ /* Set contrast */
-+ value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_POL_POSITIVE | ATMEL_LCDC_ENA_PWMENABLE;
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_CTR, value);
-+ lcdc_writel(sinfo, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT);
-+ /* ...wait for DMA engine to become idle... */
-+ while (lcdc_readl(sinfo, ATMEL_LCDC_DMACON) & ATMEL_LCDC_DMABUSY)
-+ msleep(10);
-+
-+ dev_dbg(info->device, " * re-enable DMA engine\n");
-+ /* ...and enable it with updated configuration */
-+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, sinfo->default_dmacon);
-+
-+ dev_dbg(info->device, " * re-enable LCDC core\n");
-+ lcdc_writel(sinfo, ATMEL_LCDC_PWRCON,
-+ (sinfo->guard_time << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR);
-+
-+ dev_dbg(info->device, " * DONE\n");
++static void
++usba_ep_free_request(struct usb_ep *_ep, struct usb_request *_req)
++{
++ struct usba_request *req = to_usba_req(_req);
+
-+ return 0;
++ DBG(DBG_GADGET, "ep_free_request: %p, %p\n", _ep, _req);
++
++ kfree(req);
+}
+
-+static inline unsigned int chan_to_field(unsigned int chan, const struct fb_bitfield *bf)
++static void *usba_ep_alloc_buffer(struct usb_ep *_ep, unsigned bytes,
++ dma_addr_t *dma, unsigned gfp_flags)
+{
-+ chan &= 0xffff;
-+ chan >>= 16 - bf->length;
-+ return chan << bf->offset;
++ void *buf;
++
++ if (bytes < L1_CACHE_BYTES)
++ bytes = L1_CACHE_BYTES;
++
++ buf = kmalloc(bytes, gfp_flags);
++
++ /*
++ * Seems like we have to map the buffer any chance we get.
++ * ether.c wants us to initialize the dma member of a
++ * different request than the one receiving the buffer, so one
++ * never knows...
++ *
++ * Ah, screw it. The ether driver is probably wrong, and this
++ * is not the right place to do the mapping. The driver
++ * shouldn't mess with our DMA mappings anyway.
++ */
++ *dma = DMA_ADDR_INVALID;
++
++ return buf;
+}
+
-+/**
-+ * atmel_lcdfb_setcolreg - Optional function. Sets a color register.
-+ * @regno: Which register in the CLUT we are programming
-+ * @red: The red value which can be up to 16 bits wide
-+ * @green: The green value which can be up to 16 bits wide
-+ * @blue: The blue value which can be up to 16 bits wide.
-+ * @transp: If supported the alpha value which can be up to 16 bits wide.
-+ * @info: frame buffer info structure
-+ *
-+ * Set a single color register. The values supplied have a 16 bit
-+ * magnitude which needs to be scaled in this function for the hardware.
-+ * Things to take into consideration are how many color registers, if
-+ * any, are supported with the current color visual. With truecolor mode
-+ * no color palettes are supported. Here a psuedo palette is created
-+ * which we store the value in pseudo_palette in struct fb_info. For
-+ * pseudocolor mode we have a limited color palette. To deal with this
-+ * we can program what color is displayed for a particular pixel value.
-+ * DirectColor is similar in that we can program each color field. If
-+ * we have a static colormap we don't need to implement this function.
-+ *
-+ * Returns negative errno on error, or zero on success. In an
-+ * ideal world, this would have been the case, but as it turns
-+ * out, the other drivers return 1 on failure, so that's what
-+ * we're going to do.
-+ */
-+static int atmel_lcdfb_setcolreg(unsigned int regno, unsigned int red,
-+ unsigned int green, unsigned int blue,
-+ unsigned int transp, struct fb_info *info)
++static void usba_ep_free_buffer(struct usb_ep *_ep, void *buf,
++ dma_addr_t dma, unsigned bytes)
+{
-+ struct atmel_lcdfb_info *sinfo = info->par;
-+ unsigned int val;
-+ u32 *pal;
-+ int ret = 1;
++ DBG(DBG_GADGET, "ep_free_buffer: %s, buf %p (size %u)\n",
++ _ep->name, buf, bytes);
++ kfree(buf);
++}
+
-+ if (info->var.grayscale)
-+ red = green = blue = (19595 * red + 38470 * green
-+ + 7471 * blue) >> 16;
++static int queue_dma(struct usba_udc *udc, struct usba_ep *ep,
++ struct usba_request *req, gfp_t gfp_flags)
++{
++ unsigned long flags;
++ int ret;
+
-+ switch (info->fix.visual) {
-+ case FB_VISUAL_TRUECOLOR:
-+ if (regno < 16) {
-+ pal = info->pseudo_palette;
++ DBG(DBG_DMA, "%s: req l/%u d/%08x %c%c%c\n",
++ ep_name(ep), req->req.length, req->req.dma,
++ req->req.zero ? 'Z' : 'z',
++ req->req.short_not_ok ? 'S' : 's',
++ req->req.no_interrupt ? 'I' : 'i');
+
-+ val = chan_to_field(red, &info->var.red);
-+ val |= chan_to_field(green, &info->var.green);
-+ val |= chan_to_field(blue, &info->var.blue);
++ if (req->req.length > 0x10000) {
++ /* Lengths from 0 to 65536 (inclusive) are supported */
++ DBG(DBG_ERR, "invalid request length %u\n", req->req.length);
++ return -EINVAL;
++ }
+
-+ pal[regno] = val;
-+ ret = 0;
-+ }
-+ break;
++ req->using_dma = 1;
+
-+ case FB_VISUAL_PSEUDOCOLOR:
-+ if (regno < 256) {
-+ val = ((red >> 11) & 0x001f);
-+ val |= ((green >> 6) & 0x03e0);
-+ val |= ((blue >> 1) & 0x7c00);
++ if (req->req.dma == DMA_ADDR_INVALID) {
++ req->req.dma = dma_map_single(
++ &udc->pdev->dev, req->req.buf, req->req.length,
++ ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
++ req->mapped = 1;
++ } else {
++ dma_sync_single_for_device(
++ &udc->pdev->dev, req->req.dma, req->req.length,
++ ep_is_in(ep) ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
++ req->mapped = 0;
++ }
+
-+ /*
-+ * TODO: intensity bit. Maybe something like
-+ * ~(red[10] ^ green[10] ^ blue[10]) & 1
-+ */
++ req->ctrl = (USBA_BF(DMA_BUF_LEN, req->req.length)
++ | USBA_BIT(DMA_CH_EN) | USBA_BIT(DMA_END_BUF_IE)
++ | USBA_BIT(DMA_END_TR_EN) | USBA_BIT(DMA_END_TR_IE));
+
-+ lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
-+ ret = 0;
-+ }
-+ break;
++ if (ep_is_in(ep))
++ req->ctrl |= USBA_BIT(DMA_END_BUF_EN);
++
++ /*
++ * Add this request to the queue and submit for DMA if
++ * possible. Check if we're still alive first -- we may have
++ * received a reset since last time we checked.
++ */
++ ret = -ESHUTDOWN;
++ spin_lock_irqsave(&udc->lock, flags);
++ if (ep->desc) {
++ if (list_empty(&ep->queue))
++ submit_request(ep, req);
++
++ list_add_tail(&req->queue, &ep->queue);
++ ret = 0;
+ }
++ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return ret;
+}
+
-+static int atmel_lcdfb_pan_display(struct fb_var_screeninfo *var,
-+ struct fb_info *info)
++static int usba_ep_queue(struct usb_ep *_ep, struct usb_request *_req,
++ gfp_t gfp_flags)
+{
-+ dev_dbg(info->device, "%s\n", __func__);
++ struct usba_request *req = to_usba_req(_req);
++ struct usba_ep *ep = to_usba_ep(_ep);
++ struct usba_udc *udc = ep->udc;
++ unsigned long flags;
++ int ret;
+
-+ atmel_lcdfb_update_dma(info, var);
++ DBG(DBG_GADGET | DBG_QUEUE | DBG_REQ,
++ "%s: queue req %p, len %u\n", ep_name(ep), req, _req->length);
+
-+ return 0;
++ if (!udc->driver || udc->gadget.speed == USB_SPEED_UNKNOWN
++ || !ep->desc)
++ return -ESHUTDOWN;
++
++ req->submitted = 0;
++ req->using_dma = 0;
++ req->last_transaction = 0;
++
++ _req->status = -EINPROGRESS;
++ _req->actual = 0;
++
++ if (ep_can_dma(ep))
++ return queue_dma(udc, ep, req, gfp_flags);
++
++ /* May have received a reset since last time we checked */
++ ret = -ESHUTDOWN;
++ spin_lock_irqsave(&udc->lock, flags);
++ if (ep->desc) {
++ list_add_tail(&req->queue, &ep->queue);
++
++ if (ep_is_in(ep)
++ || (ep_is_control(ep)
++ && (ep->state == DATA_STAGE_IN
++ || ep->state == STATUS_STAGE_IN)))
++ usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_PK_RDY));
++ else
++ usba_ep_writel(ep, CTL_ENB, USBA_BIT(RX_BK_RDY));
++ ret = 0;
++ }
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return ret;
+}
+
-+static struct fb_ops atmel_lcdfb_ops = {
-+ .owner = THIS_MODULE,
-+ .fb_check_var = atmel_lcdfb_check_var,
-+ .fb_set_par = atmel_lcdfb_set_par,
-+ .fb_setcolreg = atmel_lcdfb_setcolreg,
-+ .fb_pan_display = atmel_lcdfb_pan_display,
-+ .fb_fillrect = cfb_fillrect,
-+ .fb_copyarea = cfb_copyarea,
-+ .fb_imageblit = cfb_imageblit,
-+};
++static void usba_update_req(struct usba_ep *ep, struct usba_request *req,
++ u32 status)
++{
++ req->req.actual = req->req.length - USBA_BFEXT(DMA_BUF_LEN, status);
++}
+
-+static irqreturn_t atmel_lcdfb_interrupt(int irq, void *dev_id)
++static int stop_dma(struct usba_ep *ep, u32 *pstatus)
+{
-+ struct fb_info *info = dev_id;
-+ struct atmel_lcdfb_info *sinfo = info->par;
++ unsigned int timeout;
+ u32 status;
+
-+ status = lcdc_readl(sinfo, ATMEL_LCDC_ISR);
-+ lcdc_writel(sinfo, ATMEL_LCDC_IDR, status);
-+ return IRQ_HANDLED;
++ /*
++ * Stop the DMA controller. When writing both CH_EN
++ * and LINK to 0, the other bits are not affected.
++ */
++ usba_dma_writel(ep, CONTROL, 0);
++
++ /* Wait for the FIFO to empty */
++ for (timeout = 40; timeout; --timeout) {
++ status = usba_dma_readl(ep, STATUS);
++ if (!(status & USBA_BIT(DMA_CH_EN)))
++ break;
++ udelay(1);
++ }
++
++ if (pstatus)
++ *pstatus = status;
++
++ if (timeout == 0) {
++ dev_err(&ep->udc->pdev->dev,
++ "%s: timed out waiting for DMA FIFO to empty\n",
++ ep_name(ep));
++ return -ETIMEDOUT;
++ }
++
++ return 0;
+}
+
-+static int __init atmel_lcdfb_init_fbinfo(struct atmel_lcdfb_info *sinfo)
++static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
+{
-+ struct fb_info *info = sinfo->info;
++ struct usba_ep *ep = to_usba_ep(_ep);
++ struct usba_udc *udc = ep->udc;
++ struct usba_request *req = to_usba_req(_req);
++ unsigned long flags;
++ u32 status;
++
++ DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n",
++ ep_name(ep), req);
++
++ spin_lock_irqsave(&udc->lock, flags);
++
++ if (req->using_dma) {
++ /*
++ * If this request is currently being transferred,
++ * stop the DMA controller and reset the FIFO.
++ */
++ if (ep->queue.next == &req->queue) {
++ status = usba_dma_readl(ep, STATUS);
++ if (status & USBA_BIT(DMA_CH_EN))
++ stop_dma(ep, &status);
++
++#ifdef CONFIG_DEBUG_FS
++ ep->last_dma_status = status;
++#endif
++
++ usba_writel(udc, EPT_RST,
++ 1 << ep_index(ep));
++
++ usba_update_req(ep, req, status);
++ }
++ }
++
++ /*
++ * Errors should stop the queue from advancing until the
++ * completion function returns.
++ */
++ list_del_init(&req->queue);
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ request_complete(ep, req, -ECONNRESET);
++
++ /* Process the next request if any */
++ spin_lock_irqsave(&udc->lock, flags);
++ submit_next_request(ep);
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return 0;
++}
++
++static int usba_ep_set_halt(struct usb_ep *_ep, int value)
++{
++ struct usba_ep *ep = to_usba_ep(_ep);
++ struct usba_udc *udc = ep->udc;
++ unsigned long flags;
+ int ret = 0;
+
-+ memset_io(info->screen_base, 0, info->fix.smem_len);
-+ info->var.activate |= FB_ACTIVATE_FORCE | FB_ACTIVATE_NOW;
++ DBG(DBG_GADGET, "endpoint %s: %s HALT\n", ep_name(ep),
++ value ? "set" : "clear");
+
-+ dev_info(info->device,
-+ "%luKiB frame buffer at %08lx (mapped at %p)\n",
-+ (unsigned long)info->fix.smem_len / 1024,
-+ (unsigned long)info->fix.smem_start,
-+ info->screen_base);
++ if (!ep->desc) {
++ DBG(DBG_ERR, "Attempted to halt uninitialized ep %s\n",
++ ep_name(ep));
++ return -ENODEV;
++ }
++ if (ep_is_isochronous(ep)) {
++ DBG(DBG_ERR, "Attempted to halt isochronous ep %s\n",
++ ep_name(ep));
++ return -ENOTTY;
++ }
+
-+ /* Allocate colormap */
-+ ret = fb_alloc_cmap(&info->cmap, 256, 0);
-+ if (ret < 0)
-+ dev_err(info->device, "Alloc color map failed\n");
++ spin_lock_irqsave(&udc->lock, flags);
++
++ /*
++ * We can't halt IN endpoints while there are still data to be
++ * transferred
++ */
++ if (!list_empty(&ep->queue)
++ || ((value && ep_is_in(ep)
++ && (usba_ep_readl(ep, STA)
++ & USBA_BF(BUSY_BANKS, -1L))))) {
++ ret = -EAGAIN;
++ } else {
++ if (value)
++ usba_ep_writel(ep, SET_STA, USBA_BIT(FORCE_STALL));
++ else
++ usba_ep_writel(ep, CLR_STA, (USBA_BIT(FORCE_STALL)
++ | USBA_BIT(TOGGLE_SEQ)));
++ usba_ep_readl(ep, STA);
++ }
++
++ spin_unlock_irqrestore(&udc->lock, flags);
+
+ return ret;
+}
+
-+static void atmel_lcdfb_start_clock(struct atmel_lcdfb_info *sinfo)
++static int usba_ep_fifo_status(struct usb_ep *_ep)
+{
-+ if (sinfo->bus_clk)
-+ clk_enable(sinfo->bus_clk);
-+ clk_enable(sinfo->lcdc_clk);
++ struct usba_ep *ep = to_usba_ep(_ep);
++
++ return USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
+}
+
-+static void atmel_lcdfb_stop_clock(struct atmel_lcdfb_info *sinfo)
++static void usba_ep_fifo_flush(struct usb_ep *_ep)
+{
-+ if (sinfo->bus_clk)
-+ clk_disable(sinfo->bus_clk);
-+ clk_disable(sinfo->lcdc_clk);
++ struct usba_ep *ep = to_usba_ep(_ep);
++ struct usba_udc *udc = ep->udc;
++
++ usba_writel(udc, EPT_RST, 1 << ep->index);
+}
+
++struct usb_ep_ops usba_ep_ops = {
++ .enable = usba_ep_enable,
++ .disable = usba_ep_disable,
++ .alloc_request = usba_ep_alloc_request,
++ .free_request = usba_ep_free_request,
++ .alloc_buffer = usba_ep_alloc_buffer,
++ .free_buffer = usba_ep_free_buffer,
++ .queue = usba_ep_queue,
++ .dequeue = usba_ep_dequeue,
++ .set_halt = usba_ep_set_halt,
++ .fifo_status = usba_ep_fifo_status,
++ .fifo_flush = usba_ep_fifo_flush,
++};
+
-+static int __init atmel_lcdfb_probe(struct platform_device *pdev)
++static int usba_udc_get_frame(struct usb_gadget *gadget)
+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info;
-+ struct atmel_lcdfb_info *sinfo;
-+ struct atmel_lcdfb_info *pdata_sinfo;
-+ struct resource *regs = NULL;
-+ struct resource *map = NULL;
-+ int ret;
++ struct usba_udc *udc = to_usba_udc(gadget);
+
-+ dev_dbg(dev, "%s BEGIN\n", __func__);
++ return USBA_BFEXT(FRAME_NUMBER, usba_readl(udc, FNUM));
++}
+
-+ ret = -ENOMEM;
-+ info = framebuffer_alloc(sizeof(struct atmel_lcdfb_info), dev);
-+ if (!info) {
-+ dev_err(dev, "cannot allocate memory\n");
-+ goto out;
++struct usb_gadget_ops usba_udc_ops = {
++ .get_frame = usba_udc_get_frame,
++};
++
++#define EP(nam, type, idx, dma, isoc) \
++{ \
++ .ep = { \
++ .ops = &usba_ep_ops, \
++ .name = nam, \
++ .maxpacket = type##_FIFO_SIZE, \
++ }, \
++ .udc = &the_udc, \
++ .queue = LIST_HEAD_INIT(usba_ep[idx].queue), \
++ .fifo_size = type##_FIFO_SIZE, \
++ .nr_banks = type##_NR_BANKS, \
++ .index = idx, \
++ .can_dma = dma, \
++ .can_isoc = isoc, \
++}
++
++static struct usba_ep usba_ep[] = {
++ EP("ep0", EP0, 0, 0, 0),
++ EP("ep1in-bulk", BULK, 1, 1, 0),
++ EP("ep2out-bulk", BULK, 2, 1, 0),
++ EP("ep3in-iso", ISO, 3, 1, 1),
++ EP("ep4out-iso", ISO, 4, 1, 1),
++ EP("ep5in-int", INT, 5, 1, 0),
++ EP("ep6out-int", INT, 6, 1, 0),
++};
++#undef EP
++
++static struct usb_endpoint_descriptor usba_ep0_desc = {
++ .bLength = USB_DT_ENDPOINT_SIZE,
++ .bDescriptorType = USB_DT_ENDPOINT,
++ .bEndpointAddress = 0,
++ .bmAttributes = USB_ENDPOINT_XFER_CONTROL,
++ .wMaxPacketSize = __constant_cpu_to_le16(64),
++ /* FIXME: I have no idea what to put here */
++ .bInterval = 1,
++};
++
++static void nop_release(struct device *dev)
++{
++
++}
++
++static struct usba_udc the_udc = {
++ .gadget = {
++ .ops = &usba_udc_ops,
++ .ep0 = &usba_ep[0].ep,
++ .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list),
++ .is_dualspeed = 1,
++ .name = "atmel_usba_udc",
++ .dev = {
++ .bus_id = "gadget",
++ .release = nop_release,
++ },
++ },
++
++ .lock = SPIN_LOCK_UNLOCKED,
++};
++
++/*
++ * Called with interrupts disabled and udc->lock held.
++ */
++static void reset_all_endpoints(struct usba_udc *udc)
++{
++ struct usba_ep *ep;
++ struct usba_request *req, *tmp_req;
++
++ usba_writel(udc, EPT_RST, ~0UL);
++
++ ep = to_usba_ep(udc->gadget.ep0);
++ list_for_each_entry_safe(req, tmp_req, &ep->queue, queue) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, -ECONNRESET);
+ }
+
-+ sinfo = info->par;
++ list_for_each_entry(ep, &udc->gadget.ep_list, ep.ep_list) {
++ if (ep->desc)
++ usba_ep_disable(&ep->ep);
++ }
++}
+
-+ if (dev->platform_data) {
-+ pdata_sinfo = (struct atmel_lcdfb_info *)dev->platform_data;
-+ sinfo->default_bpp = pdata_sinfo->default_bpp;
-+ sinfo->default_dmacon = pdata_sinfo->default_dmacon;
-+ sinfo->default_lcdcon2 = pdata_sinfo->default_lcdcon2;
-+ sinfo->default_monspecs = pdata_sinfo->default_monspecs;
-+ sinfo->atmel_lcdfb_power_control = pdata_sinfo->atmel_lcdfb_power_control;
-+ sinfo->guard_time = pdata_sinfo->guard_time;
-+ } else {
-+ dev_err(dev, "cannot get default configuration\n");
-+ goto free_info;
-+ }
-+ sinfo->info = info;
-+ sinfo->pdev = pdev;
-+
-+ strcpy(info->fix.id, sinfo->pdev->name);
-+ info->flags = ATMEL_LCDFB_FBINFO_DEFAULT;
-+ info->pseudo_palette = sinfo->pseudo_palette;
-+ info->fbops = &atmel_lcdfb_ops;
-+
-+ memcpy(&info->monspecs, sinfo->default_monspecs, sizeof(info->monspecs));
-+ info->fix = atmel_lcdfb_fix;
-+
-+ /* Enable LCDC Clocks */
-+ if (cpu_is_at91sam9261() || cpu_is_at32ap7000()) {
-+ sinfo->bus_clk = clk_get(dev, "hck1");
-+ if (IS_ERR(sinfo->bus_clk)) {
-+ ret = PTR_ERR(sinfo->bus_clk);
-+ goto free_info;
++static struct usba_ep *get_ep_by_addr(struct usba_udc *udc, u16 wIndex)
++{
++ struct usba_ep *ep;
++
++ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0)
++ return to_usba_ep(udc->gadget.ep0);
++
++ list_for_each_entry (ep, &udc->gadget.ep_list, ep.ep_list) {
++ u8 bEndpointAddress;
++
++ if (!ep->desc)
++ continue;
++ bEndpointAddress = ep->desc->bEndpointAddress;
++ if ((wIndex ^ bEndpointAddress) & USB_DIR_IN)
++ continue;
++ if ((wIndex & USB_ENDPOINT_NUMBER_MASK)
++ == (bEndpointAddress & USB_ENDPOINT_NUMBER_MASK))
++ return ep;
++ }
++
++ return NULL;
++}
++
++/* Called with interrupts disabled and udc->lock held */
++static inline void set_protocol_stall(struct usba_udc *udc,
++ struct usba_ep *ep)
++{
++ usba_ep_writel(ep, SET_STA, USBA_BIT(FORCE_STALL));
++ ep->state = WAIT_FOR_SETUP;
++}
++
++static inline int is_stalled(struct usba_udc *udc, struct usba_ep *ep)
++{
++ if (usba_ep_readl(ep, STA) & USBA_BIT(FORCE_STALL))
++ return 1;
++ return 0;
++}
++
++static inline void set_address(struct usba_udc *udc, unsigned int addr)
++{
++ u32 regval;
++
++ DBG(DBG_BUS, "setting address %u...\n", addr);
++ regval = usba_readl(udc, CTRL);
++ regval = USBA_BFINS(DEV_ADDR, addr, regval);
++ usba_writel(udc, CTRL, regval);
++}
++
++static int do_test_mode(struct usba_udc *udc)
++{
++ static const char test_packet_buffer[] = {
++ /* JKJKJKJK * 9 */
++ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
++ /* JJKKJJKK * 8 */
++ 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA, 0xAA,
++ /* JJKKJJKK * 8 */
++ 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE, 0xEE,
++ /* JJJJJJJKKKKKKK * 8 */
++ 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
++ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
++ /* JJJJJJJK * 8 */
++ 0x7F, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD,
++ /* {JKKKKKKK * 10}, JK */
++ 0xFC, 0x7E, 0xBF, 0xDF, 0xEF, 0xF7, 0xFB, 0xFD, 0x7E
++ };
++ struct device *dev = &udc->pdev->dev;
++ struct usba_ep *ep;
++ int test_mode;
++
++ test_mode = udc->test_mode;
++
++ /* Start from a clean slate */
++ reset_all_endpoints(udc);
++
++ switch (test_mode) {
++ case 0x0100:
++ /* Test_J */
++ usba_writel(udc, TST, USBA_BIT(TST_J_MODE));
++ dev_info(dev, "Entering Test_J mode...\n");
++ break;
++ case 0x0200:
++ /* Test_K */
++ usba_writel(udc, TST, USBA_BIT(TST_K_MODE));
++ dev_info(dev, "Entering Test_K mode...\n");
++ break;
++ case 0x0300:
++ /*
++ * Test_SE0_NAK: Force high-speed mode and set up ep0
++ * for Bulk IN transfers
++ */
++ ep = &usba_ep[0];
++ usba_writel(udc, TST,
++ USBA_BF(SPEED_CFG, USBA_SPEED_CFG_FORCE_HIGH));
++ usba_ep_writel(ep, CFG,
++ USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
++ | USBA_BIT(EPT_DIR)
++ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
++ | USBA_BF(BK_NUMBER, 1));
++ if (!(usba_ep_readl(ep, CFG) & USBA_BIT(EPT_MAPPED))) {
++ set_protocol_stall(udc, ep);
++ dev_err(dev, "Test_SE0_NAK: ep0 not mapped\n");
++ } else {
++ usba_ep_writel(ep, CTL_ENB, USBA_BIT(EPT_ENABLE));
++ dev_info(dev, "Entering Test_SE0_NAK mode...\n");
++ }
++ break;
++ case 0x0400:
++ /* Test_Packet */
++ ep = &usba_ep[0];
++ usba_ep_writel(ep, CFG,
++ USBA_BF(EPT_SIZE, USBA_EPT_SIZE_64)
++ | USBA_BIT(EPT_DIR)
++ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_BULK)
++ | USBA_BF(BK_NUMBER, 1));
++ if (!(usba_ep_readl(ep, CFG) & USBA_BIT(EPT_MAPPED))) {
++ set_protocol_stall(udc, ep);
++ dev_err(dev, "Test_Packet: ep0 not mapped\n");
++ } else {
++ usba_ep_writel(ep, CTL_ENB, USBA_BIT(EPT_ENABLE));
++ usba_writel(udc, TST, USBA_BIT(TST_PKT_MODE));
++ copy_to_fifo(ep->fifo, test_packet_buffer,
++ sizeof(test_packet_buffer));
++ usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
++ dev_info(dev, "Entering Test_Packet mode...\n");
+ }
++ break;
++ default:
++ dev_err(dev, "Invalid test mode: 0x%04x\n", test_mode);
++ return -EINVAL;
+ }
-+ sinfo->lcdc_clk = clk_get(dev, "lcdc_clk");
-+ if (IS_ERR(sinfo->lcdc_clk)) {
-+ ret = PTR_ERR(sinfo->lcdc_clk);
-+ goto put_bus_clk;
++
++ return 0;
++}
++
++/* Avoid overly long expressions */
++static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq)
++{
++ if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP))
++ return true;
++ return false;
++}
++
++static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq)
++{
++ if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE))
++ return true;
++ return false;
++}
++
++static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq)
++{
++ if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT))
++ return true;
++ return false;
++}
++
++static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep,
++ struct usb_ctrlrequest *crq)
++{
++ switch (crq->bRequest) {
++ case USB_REQ_GET_STATUS: {
++ u16 status;
++
++ if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_DEVICE)) {
++ /* Self-powered, no remote wakeup */
++ status = __constant_cpu_to_le16(1 << 0);
++ } else if (crq->bRequestType
++ == (USB_DIR_IN | USB_RECIP_INTERFACE)) {
++ status = __constant_cpu_to_le16(0);
++ } else if (crq->bRequestType
++ == (USB_DIR_IN | USB_RECIP_ENDPOINT)) {
++ struct usba_ep *target;
++
++ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++ if (!target)
++ goto stall;
++
++ status = 0;
++ if (is_stalled(udc, target))
++ status |= __constant_cpu_to_le16(1);
++ } else {
++ goto delegate;
++ }
++
++ /* Write directly to the FIFO. No queueing is done. */
++ if (crq->wLength != __constant_cpu_to_le16(sizeof(status)))
++ goto stall;
++ ep->state = DATA_STAGE_IN;
++ __raw_writew(status, ep->fifo);
++ usba_ep_writel(ep, SET_STA, USBA_BIT(TX_PK_RDY));
++ break;
+ }
-+ atmel_lcdfb_start_clock(sinfo);
+
-+ ret = fb_find_mode(&info->var, info, NULL, info->monspecs.modedb,
-+ info->monspecs.modedb_len, info->monspecs.modedb,
-+ sinfo->default_bpp);
-+ if (!ret) {
-+ dev_err(dev, "no suitable video mode found\n");
-+ goto stop_clk;
++ case USB_REQ_CLEAR_FEATURE: {
++ if (crq->bRequestType == USB_RECIP_DEVICE) {
++ if (feature_is_dev_remote_wakeup(crq)) {
++ /* TODO: Handle REMOTE_WAKEUP */
++ } else {
++ /* Can't CLEAR_FEATURE TEST_MODE */
++ goto stall;
++ }
++ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
++ struct usba_ep *target;
++
++ if (!feature_is_ep_halt(crq)
++ || crq->wLength != __constant_cpu_to_le16(0))
++ goto stall;
++ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++ if (!target)
++ goto stall;
++
++ usba_ep_writel(target, CLR_STA,
++ (USBA_BIT(FORCE_STALL)
++ | USBA_BIT(TOGGLE_SEQ)));
++ } else {
++ goto delegate;
++ }
++
++ send_status(udc, ep);
++ break;
+ }
+
++ case USB_REQ_SET_FEATURE: {
++ if (crq->bRequestType == USB_RECIP_DEVICE) {
++ if (feature_is_dev_test_mode(crq)) {
++ send_status(udc, ep);
++ ep->state = STATUS_STAGE_TEST;
++ udc->test_mode = le16_to_cpu(crq->wIndex);
++ return 0;
++ } else if (feature_is_dev_remote_wakeup(crq)) {
++ /* TODO: Handle REMOTE_WAKEUP */
++ } else {
++ goto stall;
++ }
++ } else if (crq->bRequestType == USB_RECIP_ENDPOINT) {
++ struct usba_ep *target;
+
-+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!regs) {
-+ dev_err(dev, "resources unusable\n");
-+ ret = -ENXIO;
-+ goto stop_clk;
-+ }
-+
-+ sinfo->irq_base = platform_get_irq(pdev, 0);
-+ if (sinfo->irq_base < 0) {
-+ dev_err(dev, "unable to get irq\n");
-+ ret = sinfo->irq_base;
-+ goto stop_clk;
-+ }
-+
-+ /* Initialize video memory */
-+ map = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-+ if (map) {
-+ /* use a pre-allocated memory buffer */
-+ info->fix.smem_start = map->start;
-+ info->fix.smem_len = map->end - map->start + 1;
-+ if (!request_mem_region(info->fix.smem_start,
-+ info->fix.smem_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto stop_clk;
++ if (!feature_is_ep_halt(crq)
++ || crq->wLength != __constant_cpu_to_le16(0))
++ goto stall;
++
++ target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex));
++ if (!target)
++ goto stall;
++
++ usba_ep_writel(target, SET_STA, USBA_BIT(FORCE_STALL));
++ } else
++ goto delegate;
++
++ send_status(udc, ep);
++ break;
++ }
++
++ case USB_REQ_SET_ADDRESS:
++ if (crq->bRequestType != (USB_DIR_OUT | USB_RECIP_DEVICE))
++ goto delegate;
++
++ set_address(udc, le16_to_cpu(crq->wValue));
++ send_status(udc, ep);
++ ep->state = STATUS_STAGE_ADDR;
++ break;
++
++ default:
++delegate:
++ return udc->driver->setup(&udc->gadget, crq);
++ }
++
++ return 0;
++
++stall:
++ printk(KERN_ERR
++ "udc: %s: Invalid setup request: %02x.%02x v%04x i%04x l%d, "
++ "halting endpoint...\n",
++ ep_name(ep), crq->bRequestType, crq->bRequest,
++ le16_to_cpu(crq->wValue), le16_to_cpu(crq->wIndex),
++ le16_to_cpu(crq->wLength));
++ set_protocol_stall(udc, ep);
++ return -1;
++}
++
++static void usba_control_irq(struct usba_udc *udc, struct usba_ep *ep)
++{
++ struct usba_request *req;
++ u32 epstatus;
++ u32 epctrl;
++
++restart:
++ epstatus = usba_ep_readl(ep, STA);
++ epctrl = usba_ep_readl(ep, CTL);
++
++ DBG(DBG_INT, "%s [%d]: s/%08x c/%08x\n",
++ ep_name(ep), ep->state, epstatus, epctrl);
++
++ req = NULL;
++ if (!list_empty(&ep->queue))
++ req = list_entry(ep->queue.next,
++ struct usba_request, queue);
++
++ if ((epctrl & USBA_BIT(TX_PK_RDY))
++ && !(epstatus & USBA_BIT(TX_PK_RDY))) {
++ if (req->submitted)
++ next_fifo_transaction(ep, req);
++ else
++ submit_request(ep, req);
++
++ if (req->last_transaction) {
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_PK_RDY));
++ usba_ep_writel(ep, CTL_ENB, USBA_BIT(TX_COMPLETE));
++ }
++ goto restart;
++ }
++ if ((epstatus & epctrl) & USBA_BIT(TX_COMPLETE)) {
++ usba_ep_writel(ep, CLR_STA, USBA_BIT(TX_COMPLETE));
++
++ switch (ep->state) {
++ case DATA_STAGE_IN:
++ usba_ep_writel(ep, CTL_ENB, USBA_BIT(RX_BK_RDY));
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
++ ep->state = STATUS_STAGE_OUT;
++ break;
++ case STATUS_STAGE_ADDR:
++ /* Activate our new address */
++ usba_writel(udc, CTRL, (usba_readl(udc, CTRL)
++ | USBA_BIT(FADDR_EN)));
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
++ ep->state = WAIT_FOR_SETUP;
++ break;
++ case STATUS_STAGE_IN:
++ if (req) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, 0);
++ submit_next_request(ep);
++ }
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
++ ep->state = WAIT_FOR_SETUP;
++ break;
++ case STATUS_STAGE_TEST:
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_COMPLETE));
++ ep->state = WAIT_FOR_SETUP;
++ if (do_test_mode(udc))
++ set_protocol_stall(udc, ep);
++ break;
++ default:
++ printk(KERN_ERR
++ "udc: %s: TXCOMP: Invalid endpoint state %d, "
++ "halting endpoint...\n",
++ ep_name(ep), ep->state);
++ set_protocol_stall(udc, ep);
++ break;
+ }
+
-+ info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
-+ if (!info->screen_base)
-+ goto release_intmem;
-+ } else {
-+ /* alocate memory buffer */
-+ ret = atmel_lcdfb_alloc_video_memory(sinfo);
++ goto restart;
++ }
++ if ((epstatus & epctrl) & USBA_BIT(RX_BK_RDY)) {
++ switch (ep->state) {
++ case STATUS_STAGE_OUT:
++ usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
++
++ if (req) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, 0);
++ }
++ ep->state = WAIT_FOR_SETUP;
++ break;
++
++ case DATA_STAGE_OUT:
++ receive_data(ep);
++ break;
++
++ default:
++ usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(RX_BK_RDY));
++ printk(KERN_ERR
++ "udc: %s: RXRDY: Invalid endpoint state %d, "
++ "halting endpoint...\n",
++ ep_name(ep), ep->state);
++ set_protocol_stall(udc, ep);
++ break;
++ }
++
++ goto restart;
++ }
++ if (epstatus & USBA_BIT(RX_SETUP)) {
++ union {
++ struct usb_ctrlrequest crq;
++ unsigned long data[2];
++ } crq;
++ unsigned int pkt_len;
++ int ret;
++
++ if (ep->state != WAIT_FOR_SETUP) {
++ /*
++ * Didn't expect a SETUP packet at this
++ * point. Clean up any pending requests (which
++ * may be successful).
++ */
++ int status = -EPROTO;
++
++ /*
++ * RXRDY and TXCOMP are dropped when SETUP
++ * packets arrive. Just pretend we received
++ * the status packet.
++ */
++ if (ep->state == STATUS_STAGE_OUT
++ || ep->state == STATUS_STAGE_IN) {
++ usba_ep_writel(ep, CTL_DIS,
++ USBA_BIT(RX_BK_RDY));
++ status = 0;
++ }
++
++ if (req) {
++ list_del_init(&req->queue);
++ request_complete(ep, req, status);
++ }
++ }
++
++ pkt_len = USBA_BFEXT(BYTE_COUNT, usba_ep_readl(ep, STA));
++ DBG(DBG_HW, "Packet length: %u\n", pkt_len);
++ if (pkt_len != sizeof(crq)) {
++ printk(KERN_WARNING
++ "udc: Invalid packet length %u (expected %lu)\n",
++ pkt_len, sizeof(crq));
++ set_protocol_stall(udc, ep);
++ return;
++ }
++
++ DBG(DBG_FIFO, "Copying ctrl request from 0x%p:\n", ep->fifo);
++ copy_from_fifo(crq.data, ep->fifo, sizeof(crq));
++
++ /* Free up one bank in the FIFO so that we can
++ * generate or receive a reply right away. */
++ usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_SETUP));
++
++ /* printk(KERN_DEBUG "setup: %d: %02x.%02x\n",
++ ep->state, crq.crq.bRequestType,
++ crq.crq.bRequest); */
++
++ if (crq.crq.bRequestType & USB_DIR_IN) {
++ /*
++ * The USB 2.0 spec states that "if wLength is
++ * zero, there is no data transfer phase."
++ * However, testusb #14 seems to actually
++ * expect a data phase even if wLength = 0...
++ */
++ ep->state = DATA_STAGE_IN;
++ } else {
++ if (crq.crq.wLength != __constant_cpu_to_le16(0))
++ ep->state = DATA_STAGE_OUT;
++ else
++ ep->state = STATUS_STAGE_IN;
++ }
++
++ ret = -1;
++ if (ep->index == 0)
++ ret = handle_ep0_setup(udc, ep, &crq.crq);
++ else
++ ret = udc->driver->setup(&udc->gadget, &crq.crq);
++
++ DBG(DBG_BUS, "req %02x.%02x, length %d, state %d, ret %d\n",
++ crq.crq.bRequestType, crq.crq.bRequest,
++ le16_to_cpu(crq.crq.wLength), ep->state, ret);
++
+ if (ret < 0) {
-+ dev_err(dev, "cannot allocate framebuffer: %d\n", ret);
-+ goto stop_clk;
++ /* Let the host know that we failed */
++ set_protocol_stall(udc, ep);
+ }
+ }
++}
++
++static void usba_ep_irq(struct usba_udc *udc, struct usba_ep *ep)
++{
++ struct usba_request *req;
++ u32 epstatus;
++ u32 epctrl;
++
++ epstatus = usba_ep_readl(ep, STA);
++ epctrl = usba_ep_readl(ep, CTL);
++
++ DBG(DBG_INT, "%s: interrupt, status: 0x%08x\n",
++ ep_name(ep), epstatus);
++
++ while ((epctrl & USBA_BIT(TX_PK_RDY))
++ && !(epstatus & USBA_BIT(TX_PK_RDY))) {
++ DBG(DBG_BUS, "%s: TX PK ready\n", ep_name(ep));
++
++ if (list_empty(&ep->queue)) {
++ dev_warn(&udc->pdev->dev, "ep_irq: queue empty\n");
++ usba_ep_writel(ep, CTL_DIS, USBA_BIT(TX_PK_RDY));
++ return;
++ }
+
-+ /* LCDC registers */
-+ info->fix.mmio_start = regs->start;
-+ info->fix.mmio_len = regs->end - regs->start + 1;
++ req = list_entry(ep->queue.next, struct usba_request, queue);
++
++ if (req->using_dma) {
++ /* Send a zero-length packet */
++ usba_ep_writel(ep, SET_STA,
++ USBA_BIT(TX_PK_RDY));
++ usba_ep_writel(ep, CTL_DIS,
++ USBA_BIT(TX_PK_RDY));
++ list_del_init(&req->queue);
++ submit_next_request(ep);
++ request_complete(ep, req, 0);
++ } else {
++ if (req->submitted)
++ next_fifo_transaction(ep, req);
++ else
++ submit_request(ep, req);
++
++ if (req->last_transaction) {
++ list_del_init(&req->queue);
++ submit_next_request(ep);
++ request_complete(ep, req, 0);
++ }
++ }
+
-+ if (!request_mem_region(info->fix.mmio_start,
-+ info->fix.mmio_len, pdev->name)) {
-+ ret = -EBUSY;
-+ goto free_fb;
++ epstatus = usba_ep_readl(ep, STA);
++ epctrl = usba_ep_readl(ep, CTL);
+ }
++ if ((epstatus & epctrl) & USBA_BIT(RX_BK_RDY)) {
++ DBG(DBG_BUS, "%s: RX data ready\n", ep_name(ep));
++ receive_data(ep);
++ usba_ep_writel(ep, CLR_STA, USBA_BIT(RX_BK_RDY));
++ }
++}
++
++static void usba_dma_irq(struct usba_udc *udc, struct usba_ep *ep)
++{
++ struct usba_request *req;
++ u32 status, control, pending;
+
-+ sinfo->mmio = ioremap(info->fix.mmio_start, info->fix.mmio_len);
-+ if (!sinfo->mmio) {
-+ dev_err(dev, "cannot map LCDC registers\n");
-+ goto release_mem;
++ status = usba_dma_readl(ep, STATUS);
++ control = usba_dma_readl(ep, CONTROL);
++#ifdef CONFIG_DEBUG_FS
++ ep->last_dma_status = status;
++#endif
++ pending = status & control;
++ DBG(DBG_INT | DBG_DMA, "dma irq, s/%#08x, c/%#08x\n",
++ status, control);
++
++ if (status & USBA_BIT(DMA_CH_EN)) {
++ dev_err(&udc->pdev->dev,
++ "DMA_CH_EN is set after transfer is finished!\n");
++ dev_err(&udc->pdev->dev,
++ "status=%#08x, pending=%#08x, control=%#08x\n",
++ status, pending, control);
++
++ /*
++ * try to pretend nothing happened. We might have to
++ * do something here...
++ */
+ }
+
-+ /* interrupt */
-+ ret = request_irq(sinfo->irq_base, atmel_lcdfb_interrupt, 0, pdev->name, info);
-+ if (ret) {
-+ dev_err(dev, "request_irq failed: %d\n", ret);
-+ goto unmap_mmio;
++ if (list_empty(&ep->queue))
++ /* Might happen if a reset comes along at the right moment */
++ return;
++
++ if (pending & (USBA_BIT(DMA_END_TR_ST) | USBA_BIT(DMA_END_BUF_ST))) {
++ req = list_entry(ep->queue.next, struct usba_request, queue);
++ usba_update_req(ep, req, status);
++
++ list_del_init(&req->queue);
++ submit_next_request(ep);
++ request_complete(ep, req, 0);
+ }
++}
+
-+ ret = atmel_lcdfb_init_fbinfo(sinfo);
-+ if (ret < 0) {
-+ dev_err(dev, "init fbinfo failed: %d\n", ret);
-+ goto unregister_irqs;
++static irqreturn_t usba_udc_irq(int irq, void *devid)
++{
++ struct usba_udc *udc = devid;
++ u32 status;
++ u32 dma_status;
++ u32 ep_status;
++
++ spin_lock(&udc->lock);
++
++ status = usba_readl(udc, INT_STA);
++ DBG(DBG_INT, "irq, status=%#08x\n", status);
++
++ if (status & USBA_BIT(DET_SUSPEND)) {
++ usba_writel(udc, INT_CLR, USBA_BIT(DET_SUSPEND));
++ DBG(DBG_BUS, "Suspend detected\n");
++ if (udc->gadget.speed != USB_SPEED_UNKNOWN
++ && udc->driver && udc->driver->suspend)
++ udc->driver->suspend(&udc->gadget);
+ }
+
-+ /*
-+ * This makes sure that our colour bitfield
-+ * descriptors are correctly initialised.
-+ */
-+ atmel_lcdfb_check_var(&info->var, info);
++ if (status & USBA_BIT(WAKE_UP)) {
++ usba_writel(udc, INT_CLR, USBA_BIT(WAKE_UP));
++ DBG(DBG_BUS, "Wake Up CPU detected\n");
++ }
++
++ if (status & USBA_BIT(END_OF_RESUME)) {
++ usba_writel(udc, INT_CLR, USBA_BIT(END_OF_RESUME));
++ DBG(DBG_BUS, "Resume detected\n");
++ if (udc->gadget.speed != USB_SPEED_UNKNOWN
++ && udc->driver && udc->driver->resume)
++ udc->driver->resume(&udc->gadget);
++ }
++
++ dma_status = USBA_BFEXT(DMA_INT, status);
++ if (dma_status) {
++ int i;
++
++ for (i = 1; i < USBA_NR_ENDPOINTS; i++)
++ if (dma_status & (1 << i))
++ usba_dma_irq(udc, &usba_ep[i]);
++ }
++
++ ep_status = USBA_BFEXT(EPT_INT, status);
++ if (ep_status) {
++ int i;
+
-+ ret = fb_set_var(info, &info->var);
++ for (i = 0; i < USBA_NR_ENDPOINTS; i++)
++ if (ep_status & (1 << i)) {
++ if (ep_is_control(&usba_ep[i]))
++ usba_control_irq(udc, &usba_ep[i]);
++ else
++ usba_ep_irq(udc, &usba_ep[i]);
++ }
++ }
++
++ if (status & USBA_BIT(END_OF_RESET)) {
++ struct usba_ep *ep0;
++
++ usba_writel(udc, INT_CLR, USBA_BIT(END_OF_RESET));
++ reset_all_endpoints(udc);
++
++ if (status & USBA_BIT(HIGH_SPEED)) {
++ DBG(DBG_BUS, "High-speed bus reset detected\n");
++ udc->gadget.speed = USB_SPEED_HIGH;
++ } else {
++ DBG(DBG_BUS, "Full-speed bus reset detected\n");
++ udc->gadget.speed = USB_SPEED_FULL;
++ }
++
++ ep0 = &usba_ep[0];
++ ep0->desc = &usba_ep0_desc;
++ ep0->state = WAIT_FOR_SETUP;
++ usba_ep_writel(ep0, CFG,
++ (USBA_BF(EPT_SIZE, EP0_EPT_SIZE)
++ | USBA_BF(EPT_TYPE, USBA_EPT_TYPE_CONTROL)
++ | USBA_BF(BK_NUMBER, USBA_BK_NUMBER_ONE)));
++ usba_ep_writel(ep0, CTL_ENB,
++ USBA_BIT(EPT_ENABLE) | USBA_BIT(RX_SETUP));
++ usba_writel(udc, INT_ENB, (usba_readl(udc, INT_ENB)
++ | USBA_BF(EPT_INT, 1)
++ | USBA_BIT(DET_SUSPEND)
++ | USBA_BIT(END_OF_RESUME)));
++
++ if (!(usba_ep_readl(ep0, CFG) & USBA_BIT(EPT_MAPPED)))
++ dev_warn(&udc->pdev->dev,
++ "WARNING: EP0 configuration is invalid!\n");
++ }
++
++ spin_unlock(&udc->lock);
++
++ return IRQ_HANDLED;
++}
++
++static irqreturn_t usba_vbus_irq(int irq, void *devid)
++{
++ struct usba_udc *udc = devid;
++ int vbus;
++
++ /* debounce */
++ udelay(10);
++
++ spin_lock(&udc->lock);
++ vbus = gpio_get_value(udc->vbus_pin);
++ if (vbus != udc->vbus_prev) {
++ if (vbus) {
++ usba_writel(udc, CTRL, USBA_BIT(EN_USBA));
++ usba_writel(udc, INT_ENB, USBA_BIT(END_OF_RESET));
++ } else {
++ udc->gadget.speed = USB_SPEED_UNKNOWN;
++ reset_all_endpoints(udc);
++ usba_writel(udc, CTRL, 0);
++ if (udc->driver)
++ udc->driver->disconnect(&udc->gadget);
++ }
++ udc->vbus_prev = vbus;
++ }
++ spin_unlock(&udc->lock);
++
++ return IRQ_HANDLED;
++}
++
++int usb_gadget_register_driver(struct usb_gadget_driver *driver)
++{
++ struct usba_udc *udc = &the_udc;
++ unsigned long flags;
++ int ret;
++
++ if (!udc->pdev)
++ return -ENODEV;
++
++ spin_lock_irqsave(&udc->lock, flags);
++ if (udc->driver) {
++ spin_unlock_irqrestore(&udc->lock, flags);
++ return -EBUSY;
++ }
++
++ udc->driver = driver;
++ udc->gadget.dev.driver = &driver->driver;
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ clk_enable(udc->pclk);
++ clk_enable(udc->hclk);
++
++ ret = driver->bind(&udc->gadget);
+ if (ret) {
-+ dev_warn(dev, "unable to set display parameters\n");
-+ goto free_cmap;
++ DBG(DBG_ERR, "Could not bind to driver %s: error %d\n",
++ driver->driver.name, ret);
++ goto err_driver_bind;
+ }
+
-+ dev_set_drvdata(dev, info);
++ DBG(DBG_GADGET, "registered driver `%s'\n", driver->driver.name);
+
-+ /*
-+ * Tell the world that we're ready to go
-+ */
-+ ret = register_framebuffer(info);
-+ if (ret < 0) {
-+ dev_err(dev, "failed to register framebuffer device: %d\n", ret);
-+ goto free_cmap;
++ udc->vbus_prev = 0;
++ if (udc->vbus_pin != -1) {
++ ret = request_irq(gpio_to_irq(udc->vbus_pin),
++ usba_vbus_irq, 0, "atmel_usba_udc", udc);
++ if (ret) {
++ gpio_free(udc->vbus_pin);
++ udc->vbus_pin = -1;
++ dev_warn(&udc->pdev->dev,
++ "failed to request vbus irq; "
++ "assuming always on\n");
++ }
++ }
++
++ /* If Vbus is present, enable the controller and wait for reset */
++ spin_lock_irqsave(&udc->lock, flags);
++ if (vbus_is_present(udc) && udc->vbus_prev == 0) {
++ usba_writel(udc, CTRL, USBA_BIT(EN_USBA));
++ usba_writel(udc, INT_ENB, USBA_BIT(END_OF_RESET));
+ }
++ spin_unlock_irqrestore(&udc->lock, flags);
++
++ return 0;
++
++err_driver_bind:
++ udc->driver = NULL;
++ udc->gadget.dev.driver = NULL;
++ return ret;
++}
++EXPORT_SYMBOL(usb_gadget_register_driver);
++
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++ struct usba_udc *udc = &the_udc;
++ unsigned long flags;
++
++ if (!udc->pdev)
++ return -ENODEV;
++ if (driver != udc->driver)
++ return -EINVAL;
++
++ if (udc->vbus_pin != -1)
++ free_irq(gpio_to_irq(udc->vbus_pin), udc);
+
-+ /* Power up the LCDC screen */
-+ if (sinfo->atmel_lcdfb_power_control)
-+ sinfo->atmel_lcdfb_power_control(1);
++ spin_lock_irqsave(&udc->lock, flags);
++ udc->gadget.speed = USB_SPEED_UNKNOWN;
++ reset_all_endpoints(udc);
++ spin_unlock_irqrestore(&udc->lock, flags);
+
-+ dev_info(dev, "fb%d: Atmel LCDC at 0x%08lx (mapped at %p), irq %lu\n",
-+ info->node, info->fix.mmio_start, sinfo->mmio, sinfo->irq_base);
++ /* This will also disable the DP pullup */
++ usba_writel(udc, CTRL, 0);
++
++ driver->unbind(&udc->gadget);
++ udc->gadget.dev.driver = NULL;
++ udc->driver = NULL;
++
++ clk_disable(udc->hclk);
++ clk_disable(udc->pclk);
++
++ DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name);
+
+ return 0;
++}
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
+
++static int __devinit usba_udc_probe(struct platform_device *pdev)
++{
++ struct usba_platform_data *pdata = pdev->dev.platform_data;
++ struct resource *regs, *fifo;
++ struct clk *pclk, *hclk;
++ struct usba_udc *udc = &the_udc;
++ int irq, ret, i;
++
++ regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID);
++ fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID);
++ if (!regs || !fifo)
++ return -ENXIO;
++
++ irq = platform_get_irq(pdev, 0);
++ if (irq < 0)
++ return irq;
++
++ pclk = clk_get(&pdev->dev, "pclk");
++ if (IS_ERR(pclk))
++ return PTR_ERR(pclk);
++ hclk = clk_get(&pdev->dev, "hclk");
++ if (IS_ERR(hclk)) {
++ ret = PTR_ERR(hclk);
++ goto err_get_hclk;
++ }
++
++ udc->pdev = pdev;
++ udc->pclk = pclk;
++ udc->hclk = hclk;
++ udc->vbus_pin = -1;
++
++ ret = -ENOMEM;
++ udc->regs = ioremap(regs->start, regs->end - regs->start + 1);
++ if (!udc->regs) {
++ dev_err(&pdev->dev, "Unable to map I/O memory, aborting.\n");
++ goto err_map_regs;
++ }
++ dev_info(&pdev->dev, "MMIO registers at 0x%08lx mapped at %p\n",
++ (unsigned long)regs->start, udc->regs);
++ udc->fifo = ioremap(fifo->start, fifo->end - fifo->start + 1);
++ if (!udc->fifo) {
++ dev_err(&pdev->dev, "Unable to map FIFO, aborting.\n");
++ goto err_map_fifo;
++ }
++ dev_info(&pdev->dev, "FIFO at 0x%08lx mapped at %p\n",
++ (unsigned long)fifo->start, udc->fifo);
++
++ device_initialize(&udc->gadget.dev);
++ udc->gadget.dev.parent = &pdev->dev;
++ udc->gadget.dev.dma_mask = pdev->dev.dma_mask;
++
++ platform_set_drvdata(pdev, udc);
++
++ /* Make sure we start from a clean slate */
++ clk_enable(pclk);
++ usba_writel(udc, CTRL, 0);
++ clk_disable(pclk);
++
++ INIT_LIST_HEAD(&usba_ep[0].ep.ep_list);
++ usba_ep[0].ep_regs = udc->regs + USBA_EPT_BASE(0);
++ usba_ep[0].dma_regs = udc->regs + USBA_DMA_BASE(0);
++ usba_ep[0].fifo = udc->fifo + USBA_FIFO_BASE(0);
++ for (i = 1; i < ARRAY_SIZE(usba_ep); i++) {
++ struct usba_ep *ep = &usba_ep[i];
++
++ ep->ep_regs = udc->regs + USBA_EPT_BASE(i);
++ ep->dma_regs = udc->regs + USBA_DMA_BASE(i);
++ ep->fifo = udc->fifo + USBA_FIFO_BASE(i);
++
++ list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list);
++ }
++
++ ret = request_irq(irq, usba_udc_irq, IRQF_SAMPLE_RANDOM,
++ "atmel_usba_udc", udc);
++ if (ret) {
++ dev_err(&pdev->dev, "Cannot request irq %d (error %d)\n",
++ irq, ret);
++ goto err_request_irq;
++ }
++ udc->irq = irq;
++
++ ret = device_add(&udc->gadget.dev);
++ if (ret) {
++ dev_dbg(&pdev->dev, "Could not add gadget: %d\n", ret);
++ goto err_device_add;
++ }
++
++ if (pdata && pdata->vbus_pin != GPIO_PIN_NONE)
++ if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc"))
++ udc->vbus_pin = pdata->vbus_pin;
++
++ usba_init_debugfs(udc);
++ for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
++ usba_ep_init_debugfs(udc, &usba_ep[i]);
++
++ return 0;
++
++err_device_add:
++ free_irq(irq, udc);
++err_request_irq:
++ iounmap(udc->fifo);
++err_map_fifo:
++ iounmap(udc->regs);
++err_map_regs:
++ clk_put(hclk);
++err_get_hclk:
++ clk_put(pclk);
++
++ platform_set_drvdata(pdev, NULL);
+
-+free_cmap:
-+ fb_dealloc_cmap(&info->cmap);
-+unregister_irqs:
-+ free_irq(sinfo->irq_base, info);
-+unmap_mmio:
-+ iounmap(sinfo->mmio);
-+release_mem:
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+free_fb:
-+ if (map)
-+ iounmap(info->screen_base);
-+ else
-+ atmel_lcdfb_free_video_memory(sinfo);
-+
-+release_intmem:
-+ if (map)
-+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+stop_clk:
-+ atmel_lcdfb_stop_clock(sinfo);
-+ clk_put(sinfo->lcdc_clk);
-+put_bus_clk:
-+ if (sinfo->bus_clk)
-+ clk_put(sinfo->bus_clk);
-+free_info:
-+ framebuffer_release(info);
-+out:
-+ dev_dbg(dev, "%s FAILED\n", __func__);
+ return ret;
+}
+
-+static int __exit atmel_lcdfb_remove(struct platform_device *pdev)
++static int __devexit usba_udc_remove(struct platform_device *pdev)
+{
-+ struct device *dev = &pdev->dev;
-+ struct fb_info *info = dev_get_drvdata(dev);
-+ struct atmel_lcdfb_info *sinfo = info->par;
++ struct usba_udc *udc;
++ int i;
+
-+ if (!sinfo)
-+ return 0;
++ udc = platform_get_drvdata(pdev);
+
-+ if (sinfo->atmel_lcdfb_power_control)
-+ sinfo->atmel_lcdfb_power_control(0);
-+ unregister_framebuffer(info);
-+ atmel_lcdfb_stop_clock(sinfo);
-+ clk_put(sinfo->lcdc_clk);
-+ if (sinfo->bus_clk)
-+ clk_put(sinfo->bus_clk);
-+ fb_dealloc_cmap(&info->cmap);
-+ free_irq(sinfo->irq_base, info);
-+ iounmap(sinfo->mmio);
-+ release_mem_region(info->fix.mmio_start, info->fix.mmio_len);
-+ if (platform_get_resource(pdev, IORESOURCE_MEM, 1)) {
-+ iounmap(info->screen_base);
-+ release_mem_region(info->fix.smem_start, info->fix.smem_len);
-+ } else {
-+ atmel_lcdfb_free_video_memory(sinfo);
-+ }
++ for (i = 1; i < ARRAY_SIZE(usba_ep); i++)
++ usba_ep_cleanup_debugfs(&usba_ep[i]);
++ usba_cleanup_debugfs(udc);
++
++ if (udc->vbus_pin != -1)
++ gpio_free(udc->vbus_pin);
+
-+ dev_set_drvdata(dev, NULL);
-+ framebuffer_release(info);
++ free_irq(udc->irq, udc);
++ iounmap(udc->fifo);
++ iounmap(udc->regs);
++ clk_put(udc->hclk);
++ clk_put(udc->pclk);
++
++ device_unregister(&udc->gadget.dev);
+
+ return 0;
+}
+
-+static struct platform_driver atmel_lcdfb_driver = {
-+ .remove = __exit_p(atmel_lcdfb_remove),
++static struct platform_driver udc_driver = {
++ .probe = usba_udc_probe,
++ .remove = __devexit_p(usba_udc_remove),
+ .driver = {
-+ .name = "atmel_lcdfb",
-+ .owner = THIS_MODULE,
++ .name = "atmel_usba_udc",
+ },
+};
+
-+static int __init atmel_lcdfb_init(void)
++static int __init udc_init(void)
+{
-+ return platform_driver_probe(&atmel_lcdfb_driver, atmel_lcdfb_probe);
++ return platform_driver_register(&udc_driver);
+}
++module_init(udc_init);
+
-+static void __exit atmel_lcdfb_exit(void)
++static void __exit udc_exit(void)
+{
-+ platform_driver_unregister(&atmel_lcdfb_driver);
++ platform_driver_unregister(&udc_driver);
+}
++module_exit(udc_exit);
+
-+module_init(atmel_lcdfb_init);
-+module_exit(atmel_lcdfb_exit);
-+
-+MODULE_DESCRIPTION("AT91/AT32 LCD Controller framebuffer driver");
-+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@rfo.atmel.com>");
++MODULE_DESCRIPTION("Atmel USBA UDC driver");
++MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_LICENSE("GPL");
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/video/backlight/Kconfig avr32-git/drivers/video/backlight/Kconfig
---- linux-2.6.21.3/drivers/video/backlight/Kconfig 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/video/backlight/Kconfig 2007-06-06 11:34:00.000000000 +0200
+diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.h linux-avr32.git/drivers/usb/gadget/atmel_usba_udc.h
+--- linux-2.6.22.1/drivers/usb/gadget/atmel_usba_udc.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/drivers/usb/gadget/atmel_usba_udc.h 2007-07-12 14:00:19.000000000 +0200
+@@ -0,0 +1,402 @@
++/*
++ * Driver for the Atmel USBA high speed USB device controller
++ *
++ * Copyright (C) 2005-2007 Atmel Corporation
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License version 2 as
++ * published by the Free Software Foundation.
++ */
++#ifndef __LINUX_USB_GADGET_USBA_UDC_H__
++#define __LINUX_USB_GADGET_USBA_UDC_H__
++
++/* USB register offsets */
++#define USBA_CTRL 0x0000
++#define USBA_FNUM 0x0004
++#define USBA_INT_ENB 0x0010
++#define USBA_INT_STA 0x0014
++#define USBA_INT_CLR 0x0018
++#define USBA_EPT_RST 0x001c
++#define USBA_TST_SOF_CNT 0x00d0
++#define USBA_TST_CNT_A 0x00d4
++#define USBA_TST_CNT_B 0x00d8
++#define USBA_TST_MODE_REG 0x00dc
++#define USBA_TST 0x00e0
++
++/* USB endpoint register offsets */
++#define USBA_EPT_CFG 0x0000
++#define USBA_EPT_CTL_ENB 0x0004
++#define USBA_EPT_CTL_DIS 0x0008
++#define USBA_EPT_CTL 0x000c
++#define USBA_EPT_SET_STA 0x0014
++#define USBA_EPT_CLR_STA 0x0018
++#define USBA_EPT_STA 0x001c
++
++/* USB DMA register offsets */
++#define USBA_DMA_NXT_DSC 0x0000
++#define USBA_DMA_ADDRESS 0x0004
++#define USBA_DMA_CONTROL 0x0008
++#define USBA_DMA_STATUS 0x000c
++
++/* Bitfields in CTRL */
++#define USBA_DEV_ADDR_OFFSET 0
++#define USBA_DEV_ADDR_SIZE 7
++#define USBA_FADDR_EN_OFFSET 7
++#define USBA_FADDR_EN_SIZE 1
++#define USBA_EN_USBA_OFFSET 8
++#define USBA_EN_USBA_SIZE 1
++#define USBA_DETACH_OFFSET 9
++#define USBA_DETACH_SIZE 1
++#define USBA_REMOTE_WAKE_UP_OFFSET 10
++#define USBA_REMOTE_WAKE_UP_SIZE 1
++
++/* Bitfields in FNUM */
++#define USBA_MICRO_FRAME_NUM_OFFSET 0
++#define USBA_MICRO_FRAME_NUM_SIZE 3
++#define USBA_FRAME_NUMBER_OFFSET 3
++#define USBA_FRAME_NUMBER_SIZE 11
++#define USBA_FRAME_NUM_ERROR_OFFSET 31
++#define USBA_FRAME_NUM_ERROR_SIZE 1
++
++/* Bitfields in INT_ENB/INT_STA/INT_CLR */
++#define USBA_HIGH_SPEED_OFFSET 0
++#define USBA_HIGH_SPEED_SIZE 1
++#define USBA_DET_SUSPEND_OFFSET 1
++#define USBA_DET_SUSPEND_SIZE 1
++#define USBA_MICRO_SOF_OFFSET 2
++#define USBA_MICRO_SOF_SIZE 1
++#define USBA_SOF_OFFSET 3
++#define USBA_SOF_SIZE 1
++#define USBA_END_OF_RESET_OFFSET 4
++#define USBA_END_OF_RESET_SIZE 1
++#define USBA_WAKE_UP_OFFSET 5
++#define USBA_WAKE_UP_SIZE 1
++#define USBA_END_OF_RESUME_OFFSET 6
++#define USBA_END_OF_RESUME_SIZE 1
++#define USBA_UPSTREAM_RESUME_OFFSET 7
++#define USBA_UPSTREAM_RESUME_SIZE 1
++#define USBA_EPT_INT_OFFSET 8
++#define USBA_EPT_INT_SIZE 16
++#define USBA_DMA_INT_OFFSET 24
++#define USBA_DMA_INT_SIZE 8
++
++/* Bitfields in EPT_RST */
++#define USBA_RST_OFFSET 0
++#define USBA_RST_SIZE 16
++
++/* Bitfields in TST_SOF_CNT */
++#define USBA_SOF_CNT_MAX_OFFSET 0
++#define USBA_SOF_CNT_MAX_SIZE 7
++#define USBA_SOF_CNT_LOAD_OFFSET 7
++#define USBA_SOF_CNT_LOAD_SIZE 1
++
++/* Bitfields in TST_CNT_A */
++#define USBA_CNT_A_MAX_OFFSET 0
++#define USBA_CNT_A_MAX_SIZE 7
++#define USBA_CNT_A_LOAD_OFFSET 7
++#define USBA_CNT_A_LOAD_SIZE 1
++
++/* Bitfields in TST_CNT_B */
++#define USBA_CNT_B_MAX_OFFSET 0
++#define USBA_CNT_B_MAX_SIZE 7
++#define USBA_CNT_B_LOAD_OFFSET 7
++#define USBA_CNT_B_LOAD_SIZE 1
++
++/* Bitfields in TST_MODE_REG */
++#define USBA_TST_MODE_OFFSET 0
++#define USBA_TST_MODE_SIZE 6
++
++/* Bitfields in USBA_TST */
++#define USBA_SPEED_CFG_OFFSET 0
++#define USBA_SPEED_CFG_SIZE 2
++#define USBA_TST_J_MODE_OFFSET 2
++#define USBA_TST_J_MODE_SIZE 1
++#define USBA_TST_K_MODE_OFFSET 3
++#define USBA_TST_K_MODE_SIZE 1
++#define USBA_TST_PKT_MODE_OFFSET 4
++#define USBA_TST_PKT_MODE_SIZE 1
++#define USBA_OPMODE2_OFFSET 5
++#define USBA_OPMODE2_SIZE 1
++
++/* Bitfields in EPT_CFG */
++#define USBA_EPT_SIZE_OFFSET 0
++#define USBA_EPT_SIZE_SIZE 3
++#define USBA_EPT_DIR_OFFSET 3
++#define USBA_EPT_DIR_SIZE 1
++#define USBA_EPT_TYPE_OFFSET 4
++#define USBA_EPT_TYPE_SIZE 2
++#define USBA_BK_NUMBER_OFFSET 6
++#define USBA_BK_NUMBER_SIZE 2
++#define USBA_NB_TRANS_OFFSET 8
++#define USBA_NB_TRANS_SIZE 2
++#define USBA_EPT_MAPPED_OFFSET 31
++#define USBA_EPT_MAPPED_SIZE 1
++
++/* Bitfields in EPT_CTL/EPT_CTL_ENB/EPT_CTL_DIS */
++#define USBA_EPT_ENABLE_OFFSET 0
++#define USBA_EPT_ENABLE_SIZE 1
++#define USBA_AUTO_VALID_OFFSET 1
++#define USBA_AUTO_VALID_SIZE 1
++#define USBA_INTDIS_DMA_OFFSET 3
++#define USBA_INTDIS_DMA_SIZE 1
++#define USBA_NYET_DIS_OFFSET 4
++#define USBA_NYET_DIS_SIZE 1
++#define USBA_DATAX_RX_OFFSET 6
++#define USBA_DATAX_RX_SIZE 1
++#define USBA_MDATA_RX_OFFSET 7
++#define USBA_MDATA_RX_SIZE 1
++/* Bits 8-15 and 31 enable interrupts for respective bits in EPT_STA */
++#define USBA_BUSY_BANK_IE_OFFSET 18
++#define USBA_BUSY_BANK_IE_SIZE 1
++
++/* Bitfields in EPT_SET_STA/EPT_CLR_STA/EPT_STA */
++#define USBA_FORCE_STALL_OFFSET 5
++#define USBA_FORCE_STALL_SIZE 1
++#define USBA_TOGGLE_SEQ_OFFSET 6
++#define USBA_TOGGLE_SEQ_SIZE 2
++#define USBA_ERR_OVFLW_OFFSET 8
++#define USBA_ERR_OVFLW_SIZE 1
++#define USBA_RX_BK_RDY_OFFSET 9
++#define USBA_RX_BK_RDY_SIZE 1
++#define USBA_KILL_BANK_OFFSET 9
++#define USBA_KILL_BANK_SIZE 1
++#define USBA_TX_COMPLETE_OFFSET 10
++#define USBA_TX_COMPLETE_SIZE 1
++#define USBA_TX_PK_RDY_OFFSET 11
++#define USBA_TX_PK_RDY_SIZE 1
++#define USBA_ISO_ERR_TRANS_OFFSET 11
++#define USBA_ISO_ERR_TRANS_SIZE 1
++#define USBA_RX_SETUP_OFFSET 12
++#define USBA_RX_SETUP_SIZE 1
++#define USBA_ISO_ERR_FLOW_OFFSET 12
++#define USBA_ISO_ERR_FLOW_SIZE 1
++#define USBA_STALL_SENT_OFFSET 13
++#define USBA_STALL_SENT_SIZE 1
++#define USBA_ISO_ERR_CRC_OFFSET 13
++#define USBA_ISO_ERR_CRC_SIZE 1
++#define USBA_ISO_ERR_NBTRANS_OFFSET 13
++#define USBA_ISO_ERR_NBTRANS_SIZE 1
++#define USBA_NAK_IN_OFFSET 14
++#define USBA_NAK_IN_SIZE 1
++#define USBA_ISO_ERR_FLUSH_OFFSET 14
++#define USBA_ISO_ERR_FLUSH_SIZE 1
++#define USBA_NAK_OUT_OFFSET 15
++#define USBA_NAK_OUT_SIZE 1
++#define USBA_CURRENT_BANK_OFFSET 16
++#define USBA_CURRENT_BANK_SIZE 2
++#define USBA_BUSY_BANKS_OFFSET 18
++#define USBA_BUSY_BANKS_SIZE 2
++#define USBA_BYTE_COUNT_OFFSET 20
++#define USBA_BYTE_COUNT_SIZE 11
++#define USBA_SHORT_PACKET_OFFSET 31
++#define USBA_SHORT_PACKET_SIZE 1
++
++/* Bitfields in DMA_CONTROL */
++#define USBA_DMA_CH_EN_OFFSET 0
++#define USBA_DMA_CH_EN_SIZE 1
++#define USBA_DMA_LINK_OFFSET 1
++#define USBA_DMA_LINK_SIZE 1
++#define USBA_DMA_END_TR_EN_OFFSET 2
++#define USBA_DMA_END_TR_EN_SIZE 1
++#define USBA_DMA_END_BUF_EN_OFFSET 3
++#define USBA_DMA_END_BUF_EN_SIZE 1
++#define USBA_DMA_END_TR_IE_OFFSET 4
++#define USBA_DMA_END_TR_IE_SIZE 1
++#define USBA_DMA_END_BUF_IE_OFFSET 5
++#define USBA_DMA_END_BUF_IE_SIZE 1
++#define USBA_DMA_DESC_LOAD_IE_OFFSET 6
++#define USBA_DMA_DESC_LOAD_IE_SIZE 1
++#define USBA_DMA_BURST_LOCK_OFFSET 7
++#define USBA_DMA_BURST_LOCK_SIZE 1
++#define USBA_DMA_BUF_LEN_OFFSET 16
++#define USBA_DMA_BUF_LEN_SIZE 16
++
++/* Bitfields in DMA_STATUS */
++#define USBA_DMA_CH_ACTIVE_OFFSET 1
++#define USBA_DMA_CH_ACTIVE_SIZE 1
++#define USBA_DMA_END_TR_ST_OFFSET 4
++#define USBA_DMA_END_TR_ST_SIZE 1
++#define USBA_DMA_END_BUF_ST_OFFSET 5
++#define USBA_DMA_END_BUF_ST_SIZE 1
++#define USBA_DMA_DESC_LOAD_ST_OFFSET 6
++#define USBA_DMA_DESC_LOAD_ST_SIZE 1
++
++/* Constants for SPEED_CFG */
++#define USBA_SPEED_CFG_NORMAL 0
++#define USBA_SPEED_CFG_FORCE_HIGH 2
++#define USBA_SPEED_CFG_FORCE_FULL 3
++
++/* Constants for EPT_SIZE */
++#define USBA_EPT_SIZE_8 0
++#define USBA_EPT_SIZE_16 1
++#define USBA_EPT_SIZE_32 2
++#define USBA_EPT_SIZE_64 3
++#define USBA_EPT_SIZE_128 4
++#define USBA_EPT_SIZE_256 5
++#define USBA_EPT_SIZE_512 6
++#define USBA_EPT_SIZE_1024 7
++
++/* Constants for EPT_TYPE */
++#define USBA_EPT_TYPE_CONTROL 0
++#define USBA_EPT_TYPE_ISO 1
++#define USBA_EPT_TYPE_BULK 2
++#define USBA_EPT_TYPE_INT 3
++
++/* Constants for BK_NUMBER */
++#define USBA_BK_NUMBER_ZERO 0
++#define USBA_BK_NUMBER_ONE 1
++#define USBA_BK_NUMBER_DOUBLE 2
++#define USBA_BK_NUMBER_TRIPLE 3
++
++/* Bit manipulation macros */
++#define USBA_BIT(name) \
++ (1 << USBA_##name##_OFFSET)
++#define USBA_BF(name, value) \
++ (((value) & ((1 << USBA_##name##_SIZE) - 1)) \
++ << USBA_##name##_OFFSET)
++#define USBA_BFEXT(name, value) \
++ (((value) >> USBA_##name##_OFFSET) \
++ & ((1 << USBA_##name##_SIZE) - 1))
++#define USBA_BFINS(name, value, old) \
++ (((old) & ~(((1 << USBA_##name##_SIZE) - 1) \
++ << USBA_##name##_OFFSET)) \
++ | USBA_BF(name, value))
++
++/* Register access macros */
++#define usba_readl(udc, reg) \
++ __raw_readl((udc)->regs + USBA_##reg)
++#define usba_writel(udc, reg, value) \
++ __raw_writel((value), (udc)->regs + USBA_##reg)
++#define usba_ep_readl(ep, reg) \
++ __raw_readl((ep)->ep_regs + USBA_EPT_##reg)
++#define usba_ep_writel(ep, reg, value) \
++ __raw_writel((value), (ep)->ep_regs + USBA_EPT_##reg)
++#define usba_dma_readl(ep, reg) \
++ __raw_readl((ep)->dma_regs + USBA_DMA_##reg)
++#define usba_dma_writel(ep, reg, value) \
++ __raw_writel((value), (ep)->dma_regs + USBA_DMA_##reg)
++
++/* Calculate base address for a given endpoint or DMA controller */
++#define USBA_EPT_BASE(x) (0x100 + (x) * 0x20)
++#define USBA_DMA_BASE(x) (0x300 + (x) * 0x10)
++#define USBA_FIFO_BASE(x) ((x) << 16)
++
++/* Synth parameters */
++#define USBA_NR_ENDPOINTS 7
++
++#define EP0_FIFO_SIZE 64
++#define EP0_EPT_SIZE USBA_EPT_SIZE_64
++#define EP0_NR_BANKS 1
++#define BULK_FIFO_SIZE 512
++#define BULK_EPT_SIZE USBA_EPT_SIZE_512
++#define BULK_NR_BANKS 2
++#define ISO_FIFO_SIZE 1024
++#define ISO_EPT_SIZE USBA_EPT_SIZE_1024
++#define ISO_NR_BANKS 3
++#define INT_FIFO_SIZE 64
++#define INT_EPT_SIZE USBA_EPT_SIZE_64
++#define INT_NR_BANKS 3
++
++enum usba_ctrl_state {
++ WAIT_FOR_SETUP,
++ DATA_STAGE_IN,
++ DATA_STAGE_OUT,
++ STATUS_STAGE_IN,
++ STATUS_STAGE_OUT,
++ STATUS_STAGE_ADDR,
++ STATUS_STAGE_TEST,
++};
++/*
++ EP_STATE_IDLE,
++ EP_STATE_SETUP,
++ EP_STATE_IN_DATA,
++ EP_STATE_OUT_DATA,
++ EP_STATE_SET_ADDR_STATUS,
++ EP_STATE_RX_STATUS,
++ EP_STATE_TX_STATUS,
++ EP_STATE_HALT,
++*/
++
++struct usba_dma_desc {
++ dma_addr_t next;
++ dma_addr_t addr;
++ u32 ctrl;
++};
++
++struct usba_ep {
++ int state;
++ void __iomem *ep_regs;
++ void __iomem *dma_regs;
++ void __iomem *fifo;
++ struct usb_ep ep;
++ struct usba_udc *udc;
++
++ struct list_head queue;
++ const struct usb_endpoint_descriptor *desc;
++
++ u16 fifo_size;
++ u8 nr_banks;
++ u8 index;
++ unsigned int can_dma:1;
++ unsigned int can_isoc:1;
++ unsigned int is_isoc:1;
++ unsigned int is_in:1;
++
++#ifdef CONFIG_DEBUG_FS
++ u32 last_dma_status;
++ struct dentry *debugfs_dir;
++ struct dentry *debugfs_queue;
++ struct dentry *debugfs_dma_status;
++ struct dentry *debugfs_state;
++#endif
++};
++
++struct usba_request {
++ struct usb_request req;
++ struct list_head queue;
++
++ u32 ctrl;
++
++ unsigned int submitted:1;
++ unsigned int last_transaction:1;
++ unsigned int using_dma:1;
++ unsigned int mapped:1;
++};
++
++struct usba_udc {
++ /* Protect hw registers from concurrent modifications */
++ spinlock_t lock;
++
++ void __iomem *regs;
++ void __iomem *fifo;
++
++ struct usb_gadget gadget;
++ struct usb_gadget_driver *driver;
++ struct platform_device *pdev;
++ int irq;
++ int vbus_pin;
++ struct clk *pclk;
++ struct clk *hclk;
++
++ int test_mode;
++ int vbus_prev;
++
++#ifdef CONFIG_DEBUG_FS
++ struct dentry *debugfs_root;
++ struct dentry *debugfs_regs;
++#endif
++};
++
++#define to_usba_ep(x) container_of((x), struct usba_ep, ep)
++#define to_usba_req(x) container_of((x), struct usba_request, req)
++#define to_usba_udc(x) container_of((x), struct usba_udc, gadget)
++
++#define ep_index(ep) ((ep)->index)
++#define ep_can_dma(ep) ((ep)->can_dma)
++#define ep_is_in(ep) ((ep)->is_in)
++#define ep_is_isochronous(ep) ((ep)->is_isoc)
++#define ep_is_control(ep) (ep_index(ep) == 0)
++#define ep_name(ep) ((ep)->ep.name)
++#define ep_is_idle(ep) ((ep)->state == EP_STATE_IDLE)
++
++#endif /* __LINUX_USB_GADGET_USBA_UDC_H */
+diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/ether.c linux-avr32.git/drivers/usb/gadget/ether.c
+--- linux-2.6.22.1/drivers/usb/gadget/ether.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/usb/gadget/ether.c 2007-07-12 14:00:19.000000000 +0200
+@@ -277,7 +277,7 @@
+ #define DEV_CONFIG_CDC
+ #endif
+
+-#ifdef CONFIG_USB_GADGET_HUSB2DEV
++#ifdef CONFIG_USB_GADGET_ATMEL_USBA
+ #define DEV_CONFIG_CDC
+ #endif
+
+diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/gadget_chips.h linux-avr32.git/drivers/usb/gadget/gadget_chips.h
+--- linux-2.6.22.1/drivers/usb/gadget/gadget_chips.h 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/usb/gadget/gadget_chips.h 2007-07-12 14:00:19.000000000 +0200
+@@ -75,10 +75,10 @@
+ #define gadget_is_pxa27x(g) 0
+ #endif
+
+-#ifdef CONFIG_USB_GADGET_HUSB2DEV
+-#define gadget_is_husb2dev(g) !strcmp("husb2_udc", (g)->name)
++#ifdef CONFIG_USB_GADGET_ATMEL_USBA
++#define gadget_is_atmel_usba(g) !strcmp("atmel_usba_udc", (g)->name)
+ #else
+-#define gadget_is_husb2dev(g) 0
++#define gadget_is_atmel_usba(g) 0
+ #endif
+
+ #ifdef CONFIG_USB_GADGET_S3C2410
+@@ -181,7 +181,7 @@
+ return 0x16;
+ else if (gadget_is_mpc8272(gadget))
+ return 0x17;
+- else if (gadget_is_husb2dev(gadget))
++ else if (gadget_is_atmel_usba(gadget))
+ return 0x18;
+ else if (gadget_is_fsl_usb2(gadget))
+ return 0x19;
+diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/inode.c linux-avr32.git/drivers/usb/gadget/inode.c
+--- linux-2.6.22.1/drivers/usb/gadget/inode.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/usb/gadget/inode.c 2007-07-12 14:00:19.000000000 +0200
+@@ -37,7 +37,7 @@
+ #include <linux/device.h>
+ #include <linux/moduleparam.h>
+
+-#include <linux/usb_gadgetfs.h>
++#include <linux/usb/gadgetfs.h>
+ #include <linux/usb_gadget.h>
+
+
+diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/Kconfig linux-avr32.git/drivers/usb/gadget/Kconfig
+--- linux-2.6.22.1/drivers/usb/gadget/Kconfig 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/usb/gadget/Kconfig 2007-07-12 14:00:19.000000000 +0200
+@@ -175,6 +175,19 @@
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
++config USB_GADGET_ATMEL_USBA
++ boolean "Atmel USBA"
++ select USB_GADGET_DUALSPEED
++ depends on AVR32
++ help
++ USBA is the integrated high-speed USB Device controller on
++ the AT32AP700x processors from Atmel.
++
++config USB_ATMEL_USBA
++ tristate
++ depends on USB_GADGET_ATMEL_USBA
++ default USB_GADGET
++ select USB_GADGET_SELECTED
+
+ config USB_GADGET_OMAP
+ boolean "OMAP USB Device Controller"
+diff -x .git -Nur linux-2.6.22.1/drivers/usb/gadget/Makefile linux-avr32.git/drivers/usb/gadget/Makefile
+--- linux-2.6.22.1/drivers/usb/gadget/Makefile 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/usb/gadget/Makefile 2007-07-12 14:00:19.000000000 +0200
+@@ -8,6 +8,7 @@
+ obj-$(CONFIG_USB_OMAP) += omap_udc.o
+ obj-$(CONFIG_USB_LH7A40X) += lh7a40x_udc.o
+ obj-$(CONFIG_USB_AT91) += at91_udc.o
++obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o
+ obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o
+
+ #
+diff -x .git -Nur linux-2.6.22.1/drivers/video/atmel_lcdfb.c linux-avr32.git/drivers/video/atmel_lcdfb.c
+--- linux-2.6.22.1/drivers/video/atmel_lcdfb.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/video/atmel_lcdfb.c 2007-07-12 14:00:20.000000000 +0200
+@@ -37,7 +37,9 @@
+ #endif
+
+ #if defined(CONFIG_ARCH_AT91)
+-#define ATMEL_LCDFB_FBINFO_DEFAULT FBINFO_DEFAULT
++#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
++ | FBINFO_PARTIAL_PAN_OK \
++ | FBINFO_HWACCEL_YPAN)
+
+ static inline void atmel_lcdfb_update_dma2d(struct atmel_lcdfb_info *sinfo,
+ struct fb_var_screeninfo *var)
+@@ -74,11 +76,34 @@
+ .type = FB_TYPE_PACKED_PIXELS,
+ .visual = FB_VISUAL_TRUECOLOR,
+ .xpanstep = 0,
+- .ypanstep = 0,
++ .ypanstep = 1,
+ .ywrapstep = 0,
+ .accel = FB_ACCEL_NONE,
+ };
+
++static unsigned long compute_hozval(unsigned long xres, unsigned long lcdcon2)
++{
++ unsigned long value;
++
++ if (!(cpu_is_at91sam9261() || cpu_is_at32ap7000()))
++ return xres;
++
++ value = xres;
++ if ((lcdcon2 & ATMEL_LCDC_DISTYPE) != ATMEL_LCDC_DISTYPE_TFT) {
++ /* STN display */
++ if ((lcdcon2 & ATMEL_LCDC_DISTYPE) == ATMEL_LCDC_DISTYPE_STNCOLOR) {
++ value *= 3;
++ }
++ if ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_4
++ || ( (lcdcon2 & ATMEL_LCDC_IFWIDTH) == ATMEL_LCDC_IFWIDTH_8
++ && (lcdcon2 & ATMEL_LCDC_SCANMOD) == ATMEL_LCDC_SCANMOD_DUAL ))
++ value = DIV_ROUND_UP(value, 4);
++ else
++ value = DIV_ROUND_UP(value, 8);
++ }
++
++ return value;
++}
+
+ static void atmel_lcdfb_update_dma(struct fb_info *info,
+ struct fb_var_screeninfo *var)
+@@ -181,6 +206,7 @@
+ var->xoffset = var->yoffset = 0;
+
+ switch (var->bits_per_pixel) {
++ case 1:
+ case 2:
+ case 4:
+ case 8:
+@@ -195,8 +221,11 @@
+ var->blue.offset = 10;
+ var->red.length = var->green.length = var->blue.length = 5;
+ break;
+- case 24:
+ case 32:
++ var->transp.offset = 24;
++ var->transp.length = 8;
++ /* fall through */
++ case 24:
+ var->red.offset = 0;
+ var->green.offset = 8;
+ var->blue.offset = 16;
+@@ -228,8 +257,10 @@
+ static int atmel_lcdfb_set_par(struct fb_info *info)
+ {
+ struct atmel_lcdfb_info *sinfo = info->par;
++ unsigned long hozval_linesz;
+ unsigned long value;
+ unsigned long clk_value_khz;
++ unsigned long bits_per_line;
+
+ dev_dbg(info->device, "%s:\n", __func__);
+ dev_dbg(info->device, " * resolution: %ux%u (%ux%u virtual)\n",
+@@ -241,12 +272,15 @@
+
+ lcdc_writel(sinfo, ATMEL_LCDC_DMACON, 0);
+
+- if (info->var.bits_per_pixel <= 8)
++ if (info->var.bits_per_pixel == 1)
++ info->fix.visual = FB_VISUAL_MONO01;
++ else if (info->var.bits_per_pixel <= 8)
+ info->fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ else
+ info->fix.visual = FB_VISUAL_TRUECOLOR;
+
+- info->fix.line_length = info->var.xres_virtual * (info->var.bits_per_pixel / 8);
++ bits_per_line = info->var.xres_virtual * info->var.bits_per_pixel;
++ info->fix.line_length = DIV_ROUND_UP(bits_per_line, 8);
+
+ /* Re-initialize the DMA engine... */
+ dev_dbg(info->device, " * update DMA engine\n");
+@@ -262,18 +296,21 @@
+ /* Set pixel clock */
+ clk_value_khz = clk_get_rate(sinfo->lcdc_clk) / 1000;
+
+- value = clk_value_khz / PICOS2KHZ(info->var.pixclock);
+-
+- if (clk_value_khz % PICOS2KHZ(info->var.pixclock))
+- value++;
++ value = DIV_ROUND_UP(clk_value_khz, PICOS2KHZ(info->var.pixclock));
+
+ value = (value / 2) - 1;
++ dev_dbg(info->device, " * programming CLKVAL = 0x%08lx\n", value);
+
+ if (value <= 0) {
+ dev_notice(info->device, "Bypassing pixel clock divider\n");
+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS);
+- } else
++ } else {
+ lcdc_writel(sinfo, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET);
++ info->var.pixclock = KHZ2PICOS(clk_value_khz / (2 * (value + 1)));
++ dev_dbg(info->device, " updated pixclk: %lu KHz\n",
++ PICOS2KHZ(info->var.pixclock));
++ }
++
+
+ /* Initialize control register 2 */
+ value = sinfo->default_lcdcon2;
+@@ -311,9 +348,14 @@
+ dev_dbg(info->device, " * LCDTIM2 = %08lx\n", value);
+ lcdc_writel(sinfo, ATMEL_LCDC_TIM2, value);
+
++ /* Horizontal value (aka line size) */
++ hozval_linesz = compute_hozval(info->var.xres,
++ lcdc_readl(sinfo, ATMEL_LCDC_LCDCON2));
++
+ /* Display size */
+- value = (info->var.xres - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
++ value = (hozval_linesz - 1) << ATMEL_LCDC_HOZVAL_OFFSET;
+ value |= info->var.yres - 1;
++ dev_dbg(info->device, " * LCDFRMCFG = %08lx\n", value);
+ lcdc_writel(sinfo, ATMEL_LCDC_LCDFRMCFG, value);
+
+ /* FIFO Threshold: Use formula from data sheet */
+@@ -421,6 +463,15 @@
+ ret = 0;
+ }
+ break;
++
++ case FB_VISUAL_MONO01:
++ if (regno < 2) {
++ val = (regno == 0) ? 0x00 : 0x1F;
++ lcdc_writel(sinfo, ATMEL_LCDC_LUT(regno), val);
++ ret = 0;
++ }
++ break;
++
+ }
+
+ return ret;
+diff -x .git -Nur linux-2.6.22.1/drivers/video/backlight/Kconfig linux-avr32.git/drivers/video/backlight/Kconfig
+--- linux-2.6.22.1/drivers/video/backlight/Kconfig 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/video/backlight/Kconfig 2007-07-12 14:00:20.000000000 +0200
@@ -8,26 +8,44 @@
Enable this to be able to choose the drivers for controlling the
backlight and the LCD panel on some platforms, for example on PDAs.
@@ -8215,9 +10265,9 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/video/backlight/Kconfig a
To have support for your specific LCD panel you will have to
select the proper drivers which depend on this option.
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/video/backlight/ltv350qv.c avr32-git/drivers/video/backlight/ltv350qv.c
---- linux-2.6.21.3/drivers/video/backlight/ltv350qv.c 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/drivers/video/backlight/ltv350qv.c 2007-06-06 11:34:00.000000000 +0200
+diff -x .git -Nur linux-2.6.22.1/drivers/video/backlight/ltv350qv.c linux-avr32.git/drivers/video/backlight/ltv350qv.c
+--- linux-2.6.22.1/drivers/video/backlight/ltv350qv.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/drivers/video/backlight/ltv350qv.c 2007-06-06 11:34:00.000000000 +0200
@@ -0,0 +1,340 @@
+/*
+ * Power control for Samsung LTV350QV Quarter VGA LCD Panel
@@ -8559,9 +10609,9 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/video/backlight/ltv350qv.
+MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_DESCRIPTION("Samsung LTV350QV LCD Driver");
+MODULE_LICENSE("GPL");
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/video/backlight/ltv350qv.h avr32-git/drivers/video/backlight/ltv350qv.h
---- linux-2.6.21.3/drivers/video/backlight/ltv350qv.h 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/drivers/video/backlight/ltv350qv.h 2007-06-06 11:34:00.000000000 +0200
+diff -x .git -Nur linux-2.6.22.1/drivers/video/backlight/ltv350qv.h linux-avr32.git/drivers/video/backlight/ltv350qv.h
+--- linux-2.6.22.1/drivers/video/backlight/ltv350qv.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/drivers/video/backlight/ltv350qv.h 2007-06-06 11:34:00.000000000 +0200
@@ -0,0 +1,95 @@
+/*
+ * Register definitions for Samsung LTV350QV Quarter VGA LCD Panel
@@ -8658,9 +10708,9 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/video/backlight/ltv350qv.
+#define LTV_VCOMH_VOLTAGE(x) (((x) & 0x001f) << 0) /* 0=3V, 31=4.5V */
+
+#endif /* __LTV350QV_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/video/backlight/Makefile avr32-git/drivers/video/backlight/Makefile
---- linux-2.6.21.3/drivers/video/backlight/Makefile 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/video/backlight/Makefile 2007-06-06 11:34:00.000000000 +0200
+diff -x .git -Nur linux-2.6.22.1/drivers/video/backlight/Makefile linux-avr32.git/drivers/video/backlight/Makefile
+--- linux-2.6.22.1/drivers/video/backlight/Makefile 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/video/backlight/Makefile 2007-07-12 14:00:20.000000000 +0200
@@ -1,6 +1,8 @@
# Backlight & LCD drivers
@@ -8670,141 +10720,40 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/video/backlight/Makefile
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_CORGI) += corgi_bl.o
obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/video/fbmem.c avr32-git/drivers/video/fbmem.c
---- linux-2.6.21.3/drivers/video/fbmem.c 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/video/fbmem.c 2007-06-06 11:34:00.000000000 +0200
-@@ -1198,6 +1198,10 @@
- pgprot_val(vma->vm_page_prot) |= _PAGE_NO_CACHE;
- #elif defined(__arm__) || defined(__sh__) || defined(__m32r__)
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-+#elif defined(__avr32__)
-+ vma->vm_page_prot = __pgprot((pgprot_val(vma->vm_page_prot)
-+ & ~_PAGE_CACHABLE)
-+ | (_PAGE_BUFFER | _PAGE_DIRTY));
- #elif defined(__ia64__)
- if (efi_range_is_wc(vma->vm_start, vma->vm_end - vma->vm_start))
- vma->vm_page_prot = pgprot_writecombine(vma->vm_page_prot);
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/video/Kconfig avr32-git/drivers/video/Kconfig
---- linux-2.6.21.3/drivers/video/Kconfig 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/video/Kconfig 2007-06-06 11:34:00.000000000 +0200
-@@ -674,6 +674,22 @@
- working with S1D13806). Product specs at
- <http://www.erd.epson.com/vdc/html/legacy_13xxx.htm>
-
-+config FB_ATMEL
-+ tristate "AT91/AT32 LCD Controller support"
-+ depends on FB && (ARCH_AT91SAM9261 || ARCH_AT91SAM9263 || AVR32)
-+ select FB_CFB_FILLRECT
-+ select FB_CFB_COPYAREA
-+ select FB_CFB_IMAGEBLIT
-+ help
-+ This enables support for the AT91/AT32 LCD Controller.
-+
-+config FB_INTSRAM
-+ bool "Frame Buffer in internal SRAM"
+diff -x .git -Nur linux-2.6.22.1/drivers/video/Kconfig linux-avr32.git/drivers/video/Kconfig
+--- linux-2.6.22.1/drivers/video/Kconfig 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/drivers/video/Kconfig 2007-07-12 14:00:20.000000000 +0200
+@@ -849,6 +849,16 @@
+ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+ to let frame buffer in external SDRAM.
+
++config FB_ATMEL_STN
++ bool "Use a STN display with AT91/AT32 LCD Controller"
+ depends on FB_ATMEL && ARCH_AT91SAM9261
++ default n
+ help
-+ Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
-+ to let frame buffer in external SDRAM.
++ Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
++ Controller. Say N if you want to connect a TFT.
++
++ If unsure, say N.
+
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/drivers/video/Makefile avr32-git/drivers/video/Makefile
---- linux-2.6.21.3/drivers/video/Makefile 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/drivers/video/Makefile 2007-06-06 11:34:00.000000000 +0200
-@@ -75,6 +75,7 @@
- obj-$(CONFIG_FB_SA1100) += sa1100fb.o
- obj-$(CONFIG_FB_HIT) += hitfb.o
- obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o
-+obj-$(CONFIG_FB_ATMEL) += atmel_lcdfb.o
- obj-$(CONFIG_FB_PVR2) += pvr2fb.o
- obj-$(CONFIG_FB_VOODOO1) += sstfb.o
- obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-alpha/pgtable.h avr32-git/include/asm-alpha/pgtable.h
---- linux-2.6.21.3/include/asm-alpha/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-alpha/pgtable.h 2007-06-06 11:34:07.000000000 +0200
-@@ -345,10 +345,6 @@
- #define io_remap_pfn_range(vma, start, pfn, size, prot) \
- remap_pfn_range(vma, start, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #define pte_ERROR(e) \
- printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
- #define pmd_ERROR(e) \
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-alpha/scatterlist.h avr32-git/include/asm-alpha/scatterlist.h
---- linux-2.6.21.3/include/asm-alpha/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-alpha/scatterlist.h 2007-06-06 11:34:07.000000000 +0200
-@@ -2,6 +2,7 @@
- #define _ALPHA_SCATTERLIST_H
-
- #include <asm/page.h>
-+#include <asm/types.h>
-
- struct scatterlist {
- struct page *page;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-arm/arch-at91/cpu.h avr32-git/include/asm-arm/arch-at91/cpu.h
---- linux-2.6.21.3/include/asm-arm/arch-at91/cpu.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-arm/arch-at91/cpu.h 2007-06-06 11:34:07.000000000 +0200
-@@ -68,4 +68,10 @@
- #define cpu_is_at91sam9263() (0)
- #endif
-
-+/*
-+ * Since this is ARM, we will never run on any AVR32 CPU. But these
-+ * definitions may reduce clutter in common drivers.
-+ */
-+#define cpu_is_at32ap7000() (0)
-+
- #endif
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-arm/pgtable.h avr32-git/include/asm-arm/pgtable.h
---- linux-2.6.21.3/include/asm-arm/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-arm/pgtable.h 2007-06-06 11:34:10.000000000 +0200
-@@ -395,10 +395,6 @@
- #define io_remap_pfn_range(vma,from,pfn,size,prot) \
- remap_pfn_range(vma, from, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #define pgtable_cache_init() do { } while (0)
-
- #endif /* !__ASSEMBLY__ */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-arm/pgtable-nommu.h avr32-git/include/asm-arm/pgtable-nommu.h
---- linux-2.6.21.3/include/asm-arm/pgtable-nommu.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-arm/pgtable-nommu.h 2007-06-06 11:34:10.000000000 +0200
-@@ -83,10 +83,6 @@
- #define io_remap_page_range remap_page_range
- #define io_remap_pfn_range remap_pfn_range
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
-
- /*
- * All 32bit addresses are effectively valid for vmalloc...
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-arm26/pgtable.h avr32-git/include/asm-arm26/pgtable.h
---- linux-2.6.21.3/include/asm-arm26/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-arm26/pgtable.h 2007-06-06 11:34:10.000000000 +0200
-@@ -297,10 +297,6 @@
- #define io_remap_pfn_range(vma,from,pfn,size,prot) \
- remap_pfn_range(vma, from, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #endif /* !__ASSEMBLY__ */
-
- #endif /* _ASMARM_PGTABLE_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/arch-at32ap/board.h avr32-git/include/asm-avr32/arch-at32ap/board.h
---- linux-2.6.21.3/include/asm-avr32/arch-at32ap/board.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/arch-at32ap/board.h 2007-06-06 11:34:10.000000000 +0200
+diff -x .git -Nur linux-2.6.22.1/include/asm-arm/arch-at91/board.h linux-avr32.git/include/asm-arm/arch-at91/board.h
+--- linux-2.6.22.1/include/asm-arm/arch-at91/board.h 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/include/asm-arm/arch-at91/board.h 2007-07-12 14:00:26.000000000 +0200
+@@ -64,6 +64,7 @@
+
+ /* Ethernet (EMAC & MACB) */
+ struct at91_eth_data {
++ u32 phy_mask;
+ u8 phy_irq_pin; /* PHY IRQ */
+ u8 is_rmii; /* using RMII interface? */
+ };
+diff -x .git -Nur linux-2.6.22.1/include/asm-avr32/arch-at32ap/board.h linux-avr32.git/include/asm-avr32/arch-at32ap/board.h
+--- linux-2.6.22.1/include/asm-avr32/arch-at32ap/board.h 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/include/asm-avr32/arch-at32ap/board.h 2007-07-12 14:00:26.000000000 +0200
@@ -6,6 +6,8 @@
#include <linux/types.h>
@@ -8814,361 +10763,110 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/arch-at32ap/boa
/* Add basic devices: system manager, interrupt controller, portmuxes, etc. */
void at32_add_system_devices(void);
-@@ -30,11 +32,22 @@
+@@ -21,6 +23,7 @@
+ struct platform_device *at32_add_device_usart(unsigned int id);
+
+ struct eth_platform_data {
++ u32 phy_mask;
+ u8 is_rmii;
+ };
+ struct platform_device *
+@@ -30,9 +33,41 @@
struct platform_device *
at32_add_device_spi(unsigned int id, struct spi_board_info *b, unsigned int n);
--struct lcdc_platform_data {
-- unsigned long fbmem_start;
-- unsigned long fbmem_size;
+struct platform_device *at32_add_device_twi(unsigned int id);
+
+struct mci_platform_data {
+ int detect_pin;
+ int wp_pin;
- };
- struct platform_device *
--at32_add_device_lcdc(unsigned int id, struct lcdc_platform_data *data);
++};
++struct platform_device *
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
-+struct platform_device *at32_add_device_usba(unsigned int id);
+
-+struct atmel_lcdfb_info;
++struct usba_platform_data {
++ int vbus_pin;
++};
+struct platform_device *
-+at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-+ unsigned long fbmem_start, unsigned long fbmem_len);
++at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
+
+ struct atmel_lcdfb_info;
+ struct platform_device *
+ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
+ unsigned long fbmem_start, unsigned long fbmem_len);
+
+struct platform_device *at32_add_device_ac97c(unsigned int id);
+struct platform_device *at32_add_device_abdac(unsigned int id);
-
- #endif /* __ASM_ARCH_BOARD_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/arch-at32ap/cpu.h avr32-git/include/asm-avr32/arch-at32ap/cpu.h
---- linux-2.6.21.3/include/asm-avr32/arch-at32ap/cpu.h 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/include/asm-avr32/arch-at32ap/cpu.h 2007-06-06 11:34:10.000000000 +0200
-@@ -0,0 +1,33 @@
-+/*
-+ * AVR32 and (fake) AT91 CPU identification
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef __ASM_ARCH_CPU_H
-+#define __ASM_ARCH_CPU_H
-+
-+/*
-+ * Only AT32AP7000 is defined for now. We can identify the specific
-+ * chip at runtime, but I'm not sure if it's really worth it.
-+ */
-+#ifdef CONFIG_CPU_AT32AP7000
-+# define cpu_is_at32ap7000() (1)
-+#else
-+# define cpu_is_at32ap7000() (0)
-+#endif
+
-+/*
-+ * Since this is AVR32, we will never run on any AT91 CPU. But these
-+ * definitions may reduce clutter in common drivers.
-+ */
-+#define cpu_is_at91rm9200() (0)
-+#define cpu_is_at91sam9xe() (0)
-+#define cpu_is_at91sam9260() (0)
-+#define cpu_is_at91sam9261() (0)
-+#define cpu_is_at91sam9263() (0)
-+
-+#endif /* __ASM_ARCH_CPU_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/arch-at32ap/gpio.h avr32-git/include/asm-avr32/arch-at32ap/gpio.h
---- linux-2.6.21.3/include/asm-avr32/arch-at32ap/gpio.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/arch-at32ap/gpio.h 2007-06-06 11:34:11.000000000 +0200
-@@ -14,6 +14,8 @@
- int gpio_get_value(unsigned int gpio);
- void gpio_set_value(unsigned int gpio, int value);
-
-+#include <asm-generic/gpio.h> /* cansleep wrappers */
-+
- static inline int gpio_to_irq(unsigned int gpio)
- {
- return gpio + GPIO_IRQ_BASE;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/arch-at32ap/io.h avr32-git/include/asm-avr32/arch-at32ap/io.h
---- linux-2.6.21.3/include/asm-avr32/arch-at32ap/io.h 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/include/asm-avr32/arch-at32ap/io.h 2007-06-06 11:34:11.000000000 +0200
-@@ -0,0 +1,39 @@
-+#ifndef __ASM_AVR32_ARCH_AT32AP_IO_H
-+#define __ASM_AVR32_ARCH_AT32AP_IO_H
-+
-+/* For "bizarre" halfword swapping */
-+#include <linux/byteorder/swabb.h>
-+
-+#if defined(CONFIG_AP7000_32_BIT_SMC)
-+# define __swizzle_addr_b(addr) (addr ^ 3UL)
-+# define __swizzle_addr_w(addr) (addr ^ 2UL)
-+# define __swizzle_addr_l(addr) (addr)
-+# define ioswabb(a, x) (x)
-+# define ioswabw(a, x) (x)
-+# define ioswabl(a, x) (x)
-+# define __mem_ioswabb(a, x) (x)
-+# define __mem_ioswabw(a, x) swab16(x)
-+# define __mem_ioswabl(a, x) swab32(x)
-+#elif defined(CONFIG_AP7000_16_BIT_SMC)
-+# define __swizzle_addr_b(addr) (addr ^ 1UL)
-+# define __swizzle_addr_w(addr) (addr)
-+# define __swizzle_addr_l(addr) (addr)
-+# define ioswabb(a, x) (x)
-+# define ioswabw(a, x) (x)
-+# define ioswabl(a, x) swahw32(x)
-+# define __mem_ioswabb(a, x) (x)
-+# define __mem_ioswabw(a, x) swab16(x)
-+# define __mem_ioswabl(a, x) swahb32(x)
-+#else
-+# define __swizzle_addr_b(addr) (addr)
-+# define __swizzle_addr_w(addr) (addr)
-+# define __swizzle_addr_l(addr) (addr)
-+# define ioswabb(a, x) (x)
-+# define ioswabw(a, x) swab16(x)
-+# define ioswabl(a, x) swab32(x)
-+# define __mem_ioswabb(a, x) (x)
-+# define __mem_ioswabw(a, x) (x)
-+# define __mem_ioswabl(a, x) (x)
-+#endif
++/* depending on what's hooked up, not all SSC pins will be used */
++#define ATMEL_SSC_TK 0x01
++#define ATMEL_SSC_TF 0x02
++#define ATMEL_SSC_TD 0x04
++#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
+
-+#endif /* __ASM_AVR32_ARCH_AT32AP_IO_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/arch-at32ap/smc.h avr32-git/include/asm-avr32/arch-at32ap/smc.h
---- linux-2.6.21.3/include/asm-avr32/arch-at32ap/smc.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/arch-at32ap/smc.h 2007-06-06 11:34:11.000000000 +0200
-@@ -48,10 +48,32 @@
- unsigned int nwe_controlled:1;
-
- /*
-+ * 0: NWAIT is disabled
-+ * 1: Reserved
-+ * 2: NWAIT is frozen mode
-+ * 3: NWAIT in ready mode
-+ */
-+ unsigned int nwait_mode:2;
-+
-+ /*
- * 0: Byte select access type
- * 1: Byte write access type
- */
- unsigned int byte_write:1;
++#define ATMEL_SSC_RK 0x10
++#define ATMEL_SSC_RF 0x20
++#define ATMEL_SSC_RD 0x40
++#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
+
-+ /*
-+ * Number of clock cycles before data is released after
-+ * the rising edge of the read controlling signal
-+ *
-+ * Total cycles from SMC is tdf_cycles + 1
-+ */
-+ unsigned int tdf_cycles:4;
-+
-+ /*
-+ * 0: TDF optimization disabled
-+ * 1: TDF optimization enabled
-+ */
-+ unsigned int tdf_mode:1;
- };
-
- extern int smc_set_configuration(int cs, const struct smc_config *config);
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/arch-at32ap/time.h avr32-git/include/asm-avr32/arch-at32ap/time.h
---- linux-2.6.21.3/include/asm-avr32/arch-at32ap/time.h 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/include/asm-avr32/arch-at32ap/time.h 2007-06-06 11:34:11.000000000 +0200
-@@ -0,0 +1,112 @@
-+/*
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _ASM_AVR32_ARCH_AT32AP_TIME_H
-+#define _ASM_AVR32_ARCH_AT32AP_TIME_H
-+
-+#include <linux/platform_device.h>
-+
-+extern struct irqaction timer_irqaction;
-+extern struct platform_device at32_systc0_device;
-+extern void local_timer_interrupt(int irq, void *dev_id);
-+
-+#define TIMER_BCR 0x000000c0
-+#define TIMER_BCR_SYNC 0
-+#define TIMER_BMR 0x000000c4
-+#define TIMER_BMR_TC0XC0S 0
-+#define TIMER_BMR_TC1XC1S 2
-+#define TIMER_BMR_TC2XC2S 4
-+#define TIMER_CCR 0x00000000
-+#define TIMER_CCR_CLKDIS 1
-+#define TIMER_CCR_CLKEN 0
-+#define TIMER_CCR_SWTRG 2
-+#define TIMER_CMR 0x00000004
-+#define TIMER_CMR_ABETRG 10
-+#define TIMER_CMR_ACPA 16
-+#define TIMER_CMR_ACPC 18
-+#define TIMER_CMR_AEEVT 20
-+#define TIMER_CMR_ASWTRG 22
-+#define TIMER_CMR_BCPB 24
-+#define TIMER_CMR_BCPC 26
-+#define TIMER_CMR_BEEVT 28
-+#define TIMER_CMR_BSWTRG 30
-+#define TIMER_CMR_BURST 4
-+#define TIMER_CMR_CLKI 3
-+#define TIMER_CMR_CPCDIS 7
-+#define TIMER_CMR_CPCSTOP 6
-+#define TIMER_CMR_CPCTRG 14
-+#define TIMER_CMR_EEVT 10
-+#define TIMER_CMR_EEVTEDG 8
-+#define TIMER_CMR_ENETRG 12
-+#define TIMER_CMR_ETRGEDG 8
-+#define TIMER_CMR_LDBDIS 7
-+#define TIMER_CMR_LDBSTOP 6
-+#define TIMER_CMR_LDRA 16
-+#define TIMER_CMR_LDRB 18
-+#define TIMER_CMR_TCCLKS 0
-+#define TIMER_CMR_WAVE 15
-+#define TIMER_CMR_WAVSEL 13
-+#define TIMER_CV 0x00000010
-+#define TIMER_CV_CV 0
-+#define TIMER_IDR 0x00000028
-+#define TIMER_IDR_COVFS 0
-+#define TIMER_IDR_CPAS 2
-+#define TIMER_IDR_CPBS 3
-+#define TIMER_IDR_CPCS 4
-+#define TIMER_IDR_ETRGS 7
-+#define TIMER_IDR_LDRAS 5
-+#define TIMER_IDR_LDRBS 6
-+#define TIMER_IDR_LOVRS 1
-+#define TIMER_IER 0x00000024
-+#define TIMER_IER_COVFS 0
-+#define TIMER_IER_CPAS 2
-+#define TIMER_IER_CPBS 3
-+#define TIMER_IER_CPCS 4
-+#define TIMER_IER_ETRGS 7
-+#define TIMER_IER_LDRAS 5
-+#define TIMER_IER_LDRBS 6
-+#define TIMER_IER_LOVRS 1
-+#define TIMER_IMR 0x0000002c
-+#define TIMER_IMR_COVFS 0
-+#define TIMER_IMR_CPAS 2
-+#define TIMER_IMR_CPBS 3
-+#define TIMER_IMR_CPCS 4
-+#define TIMER_IMR_ETRGS 7
-+#define TIMER_IMR_LDRAS 5
-+#define TIMER_IMR_LDRBS 6
-+#define TIMER_IMR_LOVRS 1
-+#define TIMER_RA 0x00000014
-+#define TIMER_RA_RA 0
-+#define TIMER_RB 0x00000018
-+#define TIMER_RB_RB 0
-+#define TIMER_RC 0x0000001c
-+#define TIMER_RC_RC 0
-+#define TIMER_SR 0x00000020
-+#define TIMER_SR_CLKSTA 16
-+#define TIMER_SR_COVFS 0
-+#define TIMER_SR_CPAS 2
-+#define TIMER_SR_CPBS 3
-+#define TIMER_SR_CPCS 4
-+#define TIMER_SR_ETRGS 7
-+#define TIMER_SR_LDRAS 5
-+#define TIMER_SR_LDRBS 6
-+#define TIMER_SR_LOVRS 1
-+#define TIMER_SR_MTIOA 17
-+#define TIMER_SR_MTIOB 18
-+
-+/* Bit manipulation macros */
-+#define TIMER_BIT(name) (1 << TIMER_##name)
-+#define TIMER_BF(name,value) ((value) << TIMER_##name)
++struct platform_device *
++at32_add_device_ssc(unsigned int id, unsigned int flags);
+
-+/* Register access macros */
-+#define timer_read(port,instance,reg) \
-+ __raw_readl(port + (0x40 * instance) + TIMER_##reg)
-+#define timer_write(port,instance,reg,value) \
-+ __raw_writel((value), port + (0x40 * instance) + TIMER_##reg)
-+
-+#endif /* _ASM_AVR32_ARCH_AT32AP_TIME_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/atomic.h avr32-git/include/asm-avr32/atomic.h
---- linux-2.6.21.3/include/asm-avr32/atomic.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/atomic.h 2007-06-06 11:34:11.000000000 +0200
-@@ -173,7 +173,7 @@
- }
-
- #define atomic_xchg(v, new) (xchg(&((v)->counter), new))
--#define atomic_cmpxchg(v, o, n) ((int)cmpxchg(&((v)->counter), (o), (n)))
-+#define atomic_cmpxchg(v, o, n) (cmpxchg(&((v)->counter), (o), (n)))
-
- #define atomic_sub(i, v) (void)atomic_sub_return(i, v)
- #define atomic_add(i, v) (void)atomic_add_return(i, v)
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/bug.h avr32-git/include/asm-avr32/bug.h
---- linux-2.6.21.3/include/asm-avr32/bug.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/bug.h 2007-06-06 11:34:11.000000000 +0200
-@@ -18,27 +18,53 @@
-
- #ifdef CONFIG_DEBUG_BUGVERBOSE
-
--#define BUG() \
-- do { \
-- asm volatile(".hword %0\n\t" \
-- ".hword %1\n\t" \
-- ".long %2" \
-- : \
-- : "n"(AVR32_BUG_OPCODE), \
-- "i"(__LINE__), "X"(__FILE__)); \
-- } while (0)
-+#define _BUG_OR_WARN(flags) \
-+ asm volatile( \
-+ "1: .hword %0\n" \
-+ " .section __bug_table,\"a\",@progbits\n" \
-+ "2: .long 1b\n" \
-+ " .long %1\n" \
-+ " .short %2\n" \
-+ " .short %3\n" \
-+ " .org 2b + %4\n" \
-+ " .previous" \
-+ : \
-+ : "i"(AVR32_BUG_OPCODE), "i"(__FILE__), \
-+ "i"(__LINE__), "i"(flags), \
-+ "i"(sizeof(struct bug_entry)))
-
- #else
-
-+#define _BUG_OR_WARN(flags) \
-+ asm volatile( \
-+ "1: .hword %0\n" \
-+ " .section __bug_table,\"a\",@progbits\n" \
-+ "2: .long 1b\n" \
-+ " .short %1\n" \
-+ " .org 2b + %2\n" \
-+ " .previous" \
-+ : \
-+ : "i"(AVR32_BUG_OPCODE), "i"(flags), \
-+ "i"(sizeof(struct bug_entry)))
-+
-+#endif /* CONFIG_DEBUG_BUGVERBOSE */
-+
- #define BUG() \
- do { \
-- asm volatile(".hword %0\n\t" \
-- : : "n"(AVR32_BUG_OPCODE)); \
-+ _BUG_OR_WARN(0); \
-+ for (;;); \
- } while (0)
-
--#endif /* CONFIG_DEBUG_BUGVERBOSE */
-+#define WARN_ON(condition) \
-+ ({ \
-+ typeof(condition) __ret_warn_on = (condition); \
-+ if (unlikely(__ret_warn_on)) \
-+ _BUG_OR_WARN(BUGFLAG_WARNING); \
-+ unlikely(__ret_warn_on); \
-+ })
-
- #define HAVE_ARCH_BUG
-+#define HAVE_ARCH_WARN_ON
-
- #endif /* CONFIG_BUG */
-
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/dma-controller.h avr32-git/include/asm-avr32/dma-controller.h
---- linux-2.6.21.3/include/asm-avr32/dma-controller.h 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/include/asm-avr32/dma-controller.h 2007-06-06 11:34:11.000000000 +0200
+ #endif /* __ASM_ARCH_BOARD_H */
+diff -x .git -Nur linux-2.6.22.1/include/asm-avr32/arch-at32ap/portmux.h linux-avr32.git/include/asm-avr32/arch-at32ap/portmux.h
+--- linux-2.6.22.1/include/asm-avr32/arch-at32ap/portmux.h 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/include/asm-avr32/arch-at32ap/portmux.h 2007-07-12 14:00:26.000000000 +0200
+@@ -25,4 +25,16 @@
+ void at32_select_gpio(unsigned int pin, unsigned long flags);
+ void at32_reserve_pin(unsigned int pin);
+
++#ifdef CONFIG_GPIO_DEV
++
++/* Gang allocators and accessors; used by the GPIO /dev driver */
++int at32_gpio_port_is_valid(unsigned int port);
++int at32_select_gpio_pins(unsigned int port, u32 pins, u32 oe_mask);
++void at32_deselect_pins(unsigned int port, u32 pins);
++
++u32 at32_gpio_get_value_multiple(unsigned int port, u32 pins);
++void at32_gpio_set_value_multiple(unsigned int port, u32 value, u32 mask);
++
++#endif /* CONFIG_GPIO_DEV */
++
+ #endif /* __ASM_ARCH_PORTMUX_H__ */
+diff -x .git -Nur linux-2.6.22.1/include/asm-avr32/arch-at32ap/sm.h linux-avr32.git/include/asm-avr32/arch-at32ap/sm.h
+--- linux-2.6.22.1/include/asm-avr32/arch-at32ap/sm.h 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/include/asm-avr32/arch-at32ap/sm.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,27 +0,0 @@
+-/*
+- * AT32 System Manager interface.
+- *
+- * Copyright (C) 2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-#ifndef __ASM_AVR32_AT32_SM_H__
+-#define __ASM_AVR32_AT32_SM_H__
+-
+-struct irq_chip;
+-struct platform_device;
+-
+-struct at32_sm {
+- spinlock_t lock;
+- void __iomem *regs;
+- struct irq_chip *eim_chip;
+- unsigned int eim_first_irq;
+- struct platform_device *pdev;
+-};
+-
+-extern struct platform_device at32_sm_device;
+-extern struct at32_sm system_manager;
+-
+-#endif /* __ASM_AVR32_AT32_SM_H__ */
+diff -x .git -Nur linux-2.6.22.1/include/asm-avr32/dma-controller.h linux-avr32.git/include/asm-avr32/dma-controller.h
+--- linux-2.6.22.1/include/asm-avr32/dma-controller.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/include/asm-avr32/dma-controller.h 2007-06-06 11:34:11.000000000 +0200
@@ -0,0 +1,166 @@
+/*
+ * Copyright (C) 2005-2006 Atmel Corporation
@@ -9336,1901 +11034,301 @@ diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/dma-controller.
+extern struct dma_controller *find_dma_controller(int id);
+
+#endif /* __ASM_AVR32_DMA_CONTROLLER_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/io.h avr32-git/include/asm-avr32/io.h
---- linux-2.6.21.3/include/asm-avr32/io.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/io.h 2007-06-06 11:34:11.000000000 +0200
-@@ -1,13 +1,15 @@
- #ifndef __ASM_AVR32_IO_H
- #define __ASM_AVR32_IO_H
-
-+#include <linux/kernel.h>
- #include <linux/string.h>
--
--#ifdef __KERNEL__
-+#include <linux/types.h>
-
- #include <asm/addrspace.h>
- #include <asm/byteorder.h>
-
-+#include <asm/arch/io.h>
-+
- /* virt_to_phys will only work when address is in P1 or P2 */
- static __inline__ unsigned long virt_to_phys(volatile void *address)
- {
-@@ -36,104 +38,215 @@
- extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
- extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
-
--static inline void writeb(unsigned char b, volatile void __iomem *addr)
-+static inline void __raw_writeb(u8 v, volatile void __iomem *addr)
- {
-- *(volatile unsigned char __force *)addr = b;
-+ *(volatile u8 __force *)addr = v;
- }
--static inline void writew(unsigned short b, volatile void __iomem *addr)
-+static inline void __raw_writew(u16 v, volatile void __iomem *addr)
- {
-- *(volatile unsigned short __force *)addr = b;
-+ *(volatile u16 __force *)addr = v;
- }
--static inline void writel(unsigned int b, volatile void __iomem *addr)
-+static inline void __raw_writel(u32 v, volatile void __iomem *addr)
- {
-- *(volatile unsigned int __force *)addr = b;
-+ *(volatile u32 __force *)addr = v;
- }
--#define __raw_writeb writeb
--#define __raw_writew writew
--#define __raw_writel writel
-
--static inline unsigned char readb(const volatile void __iomem *addr)
-+static inline u8 __raw_readb(const volatile void __iomem *addr)
- {
-- return *(const volatile unsigned char __force *)addr;
-+ return *(const volatile u8 __force *)addr;
- }
--static inline unsigned short readw(const volatile void __iomem *addr)
-+static inline u16 __raw_readw(const volatile void __iomem *addr)
- {
-- return *(const volatile unsigned short __force *)addr;
-+ return *(const volatile u16 __force *)addr;
- }
--static inline unsigned int readl(const volatile void __iomem *addr)
-+static inline u32 __raw_readl(const volatile void __iomem *addr)
- {
-- return *(const volatile unsigned int __force *)addr;
-+ return *(const volatile u32 __force *)addr;
- }
--#define __raw_readb readb
--#define __raw_readw readw
--#define __raw_readl readl
-
--#define writesb(p, d, l) __raw_writesb((unsigned int)p, d, l)
--#define writesw(p, d, l) __raw_writesw((unsigned int)p, d, l)
--#define writesl(p, d, l) __raw_writesl((unsigned int)p, d, l)
-+/* Convert I/O port address to virtual address */
-+#ifndef __io
-+# define __io(p) ((void *)phys_to_uncached(p))
-+#endif
-
--#define readsb(p, d, l) __raw_readsb((unsigned int)p, d, l)
--#define readsw(p, d, l) __raw_readsw((unsigned int)p, d, l)
--#define readsl(p, d, l) __raw_readsl((unsigned int)p, d, l)
-+/*
-+ * Not really sure about the best way to slow down I/O on
-+ * AVR32. Defining it as a no-op until we have an actual test case.
-+ */
-+#define SLOW_DOWN_IO do { } while (0)
-
-+#define __BUILD_MEMORY_SINGLE(pfx, bwl, type) \
-+static inline void \
-+pfx##write##bwl(type val, volatile void __iomem *addr) \
-+{ \
-+ volatile type *__addr; \
-+ type __val; \
-+ \
-+ __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \
-+ __val = pfx##ioswab##bwl(__addr, val); \
-+ \
-+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
-+ \
-+ *__addr = __val; \
-+} \
-+ \
-+static inline type pfx##read##bwl(const volatile void __iomem *addr) \
-+{ \
-+ volatile type *__addr; \
-+ type __val; \
-+ \
-+ __addr = (void *)__swizzle_addr_##bwl((unsigned long)(addr)); \
-+ \
-+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
-+ \
-+ __val = *__addr; \
-+ return pfx##ioswab##bwl(__addr, __val); \
-+}
-+
-+#define __BUILD_IOPORT_SINGLE(pfx, bwl, type, p, slow) \
-+static inline void pfx##out##bwl##p(type val, unsigned long port) \
-+{ \
-+ volatile type *__addr; \
-+ type __val; \
-+ \
-+ __addr = __io(__swizzle_addr_##bwl(port)); \
-+ __val = pfx##ioswab##bwl(__addr, val); \
-+ \
-+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
-+ \
-+ *__addr = __val; \
-+ slow; \
-+} \
-+ \
-+static inline type pfx##in##bwl##p(unsigned long port) \
-+{ \
-+ volatile type *__addr; \
-+ type __val; \
-+ \
-+ __addr = __io(__swizzle_addr_##bwl(port)); \
-+ \
-+ BUILD_BUG_ON(sizeof(type) > sizeof(unsigned long)); \
-+ \
-+ __val = *__addr; \
-+ slow; \
-+ \
-+ return pfx##ioswab##bwl(__addr, __val); \
-+}
-+
-+#define __BUILD_MEMORY_PFX(bus, bwl, type) \
-+ __BUILD_MEMORY_SINGLE(bus, bwl, type)
-+
-+#define BUILDIO_MEM(bwl, type) \
-+ __BUILD_MEMORY_PFX(, bwl, type) \
-+ __BUILD_MEMORY_PFX(__mem_, bwl, type)
-+
-+#define __BUILD_IOPORT_PFX(bus, bwl, type) \
-+ __BUILD_IOPORT_SINGLE(bus, bwl, type, ,) \
-+ __BUILD_IOPORT_SINGLE(bus, bwl, type, _p, SLOW_DOWN_IO)
-+
-+#define BUILDIO_IOPORT(bwl, type) \
-+ __BUILD_IOPORT_PFX(, bwl, type) \
-+ __BUILD_IOPORT_PFX(__mem_, bwl, type)
-+
-+BUILDIO_MEM(b, u8)
-+BUILDIO_MEM(w, u16)
-+BUILDIO_MEM(l, u32)
-+
-+BUILDIO_IOPORT(b, u8)
-+BUILDIO_IOPORT(w, u16)
-+BUILDIO_IOPORT(l, u32)
-+
-+#define readb_relaxed readb
-+#define readw_relaxed readw
-+#define readl_relaxed readl
-+
-+#define __BUILD_MEMORY_STRING(bwl, type) \
-+static inline void writes##bwl(volatile void __iomem *addr, \
-+ const void *data, unsigned int count) \
-+{ \
-+ const type *__data = data; \
-+ \
-+ while (count--) \
-+ __mem_write##bwl(*__data++, addr); \
-+} \
-+ \
-+static inline void reads##bwl(const volatile void __iomem *addr, \
-+ void *data, unsigned int count) \
-+{ \
-+ type *__data = data; \
-+ \
-+ while (count--) \
-+ *__data++ = __mem_read##bwl(addr); \
-+}
-+
-+#define __BUILD_IOPORT_STRING(bwl, type) \
-+static inline void outs##bwl(unsigned long port, const void *data, \
-+ unsigned int count) \
-+{ \
-+ const type *__data = data; \
-+ \
-+ while (count--) \
-+ __mem_out##bwl(*__data++, port); \
-+} \
-+ \
-+static inline void ins##bwl(unsigned long port, void *data, \
-+ unsigned int count) \
-+{ \
-+ type *__data = data; \
-+ \
-+ while (count--) \
-+ *__data++ = __mem_in##bwl(port); \
-+}
-+
-+#define BUILDSTRING(bwl, type) \
-+ __BUILD_MEMORY_STRING(bwl, type) \
-+ __BUILD_IOPORT_STRING(bwl, type)
-+
-+BUILDSTRING(b, u8)
-+BUILDSTRING(w, u16)
-+BUILDSTRING(l, u32)
-
- /*
- * io{read,write}{8,16,32} macros in both le (for PCI style consumers) and native be
+diff -x .git -Nur linux-2.6.22.1/include/asm-avr32/unaligned.h linux-avr32.git/include/asm-avr32/unaligned.h
+--- linux-2.6.22.1/include/asm-avr32/unaligned.h 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/include/asm-avr32/unaligned.h 2007-07-12 14:00:26.000000000 +0200
+@@ -7,19 +7,10 @@
+ * words, but halfwords must be halfword-aligned, and doublewords must
+ * be word-aligned.
+ *
+- * TODO: Make all this CPU-specific and optimize.
++ * However, swapped word loads must be word-aligned so we can't
++ * optimize word loads in general.
*/
- #ifndef ioread8
-
--#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __v; })
-+#define ioread8(p) ((unsigned int)readb(p))
-
--#define ioread16(p) ({ unsigned int __v = le16_to_cpu(__raw_readw(p)); __v; })
--#define ioread16be(p) ({ unsigned int __v = be16_to_cpu(__raw_readw(p)); __v; })
-+#define ioread16(p) ((unsigned int)readw(p))
-+#define ioread16be(p) ((unsigned int)__raw_readw(p))
-
--#define ioread32(p) ({ unsigned int __v = le32_to_cpu(__raw_readl(p)); __v; })
--#define ioread32be(p) ({ unsigned int __v = be32_to_cpu(__raw_readl(p)); __v; })
-+#define ioread32(p) ((unsigned int)readl(p))
-+#define ioread32be(p) ((unsigned int)__raw_readl(p))
-
--#define iowrite8(v,p) __raw_writeb(v, p)
-+#define iowrite8(v,p) writeb(v, p)
-
--#define iowrite16(v,p) __raw_writew(cpu_to_le16(v), p)
--#define iowrite16be(v,p) __raw_writew(cpu_to_be16(v), p)
-+#define iowrite16(v,p) writew(v, p)
-+#define iowrite16be(v,p) __raw_writew(v, p)
-
--#define iowrite32(v,p) __raw_writel(cpu_to_le32(v), p)
--#define iowrite32be(v,p) __raw_writel(cpu_to_be32(v), p)
-+#define iowrite32(v,p) writel(v, p)
-+#define iowrite32be(v,p) __raw_writel(v, p)
-
--#define ioread8_rep(p,d,c) __raw_readsb(p,d,c)
--#define ioread16_rep(p,d,c) __raw_readsw(p,d,c)
--#define ioread32_rep(p,d,c) __raw_readsl(p,d,c)
-+#define ioread8_rep(p,d,c) readsb(p,d,c)
-+#define ioread16_rep(p,d,c) readsw(p,d,c)
-+#define ioread32_rep(p,d,c) readsl(p,d,c)
-
--#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c)
--#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c)
--#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c)
-+#define iowrite8_rep(p,s,c) writesb(p,s,c)
-+#define iowrite16_rep(p,s,c) writesw(p,s,c)
-+#define iowrite32_rep(p,s,c) writesl(p,s,c)
- #endif
-
--
--/*
-- * These two are only here because ALSA _thinks_ it needs them...
-- */
- static inline void memcpy_fromio(void * to, const volatile void __iomem *from,
- unsigned long count)
- {
-- char *p = to;
-- while (count) {
-- count--;
-- *p = readb(from);
-- p++;
-- from++;
-- }
-+ memcpy(to, (const void __force *)from, count);
- }
-
- static inline void memcpy_toio(volatile void __iomem *to, const void * from,
- unsigned long count)
- {
-- const char *p = from;
-- while (count) {
-- count--;
-- writeb(*p, to);
-- p++;
-- to++;
-- }
-+ memcpy((void __force *)to, from, count);
- }
-
- static inline void memset_io(volatile void __iomem *addr, unsigned char val,
-@@ -142,99 +255,8 @@
- memset((void __force *)addr, val, count);
- }
-
--/*
-- * Bad read/write accesses...
-- */
--extern void __readwrite_bug(const char *fn);
--
- #define IO_SPACE_LIMIT 0xffffffff
-
--/* Convert I/O port address to virtual address */
--#define __io(p) ((void __iomem *)phys_to_uncached(p))
--
--/*
-- * IO port access primitives
-- * -------------------------
-- *
-- * The AVR32 doesn't have special IO access instructions; all IO is memory
-- * mapped. Note that these are defined to perform little endian accesses
-- * only. Their primary purpose is to access PCI and ISA peripherals.
-- *
-- * Note that for a big endian machine, this implies that the following
-- * big endian mode connectivity is in place.
-- *
-- * The machine specific io.h include defines __io to translate an "IO"
-- * address to a memory address.
-- *
-- * Note that we prevent GCC re-ordering or caching values in expressions
-- * by introducing sequence points into the in*() definitions. Note that
-- * __raw_* do not guarantee this behaviour.
-- *
-- * The {in,out}[bwl] macros are for emulating x86-style PCI/ISA IO space.
-- */
--#define outb(v, p) __raw_writeb(v, __io(p))
--#define outw(v, p) __raw_writew(cpu_to_le16(v), __io(p))
--#define outl(v, p) __raw_writel(cpu_to_le32(v), __io(p))
--
--#define inb(p) __raw_readb(__io(p))
--#define inw(p) le16_to_cpu(__raw_readw(__io(p)))
--#define inl(p) le32_to_cpu(__raw_readl(__io(p)))
--
--static inline void __outsb(unsigned long port, void *addr, unsigned int count)
--{
-- while (count--) {
-- outb(*(u8 *)addr, port);
-- addr++;
-- }
--}
--
--static inline void __insb(unsigned long port, void *addr, unsigned int count)
--{
-- while (count--) {
-- *(u8 *)addr = inb(port);
-- addr++;
-- }
--}
--
--static inline void __outsw(unsigned long port, void *addr, unsigned int count)
--{
-- while (count--) {
-- outw(*(u16 *)addr, port);
-- addr += 2;
-- }
--}
--
--static inline void __insw(unsigned long port, void *addr, unsigned int count)
--{
-- while (count--) {
-- *(u16 *)addr = inw(port);
-- addr += 2;
-- }
--}
--
--static inline void __outsl(unsigned long port, void *addr, unsigned int count)
--{
-- while (count--) {
-- outl(*(u32 *)addr, port);
-- addr += 4;
-- }
--}
--
--static inline void __insl(unsigned long port, void *addr, unsigned int count)
--{
-- while (count--) {
-- *(u32 *)addr = inl(port);
-- addr += 4;
-- }
--}
+-#include <linux/string.h>
-
--#define outsb(port, addr, count) __outsb(port, addr, count)
--#define insb(port, addr, count) __insb(port, addr, count)
--#define outsw(port, addr, count) __outsw(port, addr, count)
--#define insw(port, addr, count) __insw(port, addr, count)
--#define outsl(port, addr, count) __outsl(port, addr, count)
--#define insl(port, addr, count) __insl(port, addr, count)
+-/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
-
- extern void __iomem *__ioremap(unsigned long offset, size_t size,
- unsigned long flags);
- extern void __iounmap(void __iomem *addr);
-@@ -292,6 +314,4 @@
- */
- #define xlate_dev_kmem_ptr(p) p
-
--#endif /* __KERNEL__ */
+-#define get_unaligned(ptr) \
+- ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
-
- #endif /* __ASM_AVR32_IO_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/kdebug.h avr32-git/include/asm-avr32/kdebug.h
---- linux-2.6.21.3/include/asm-avr32/kdebug.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/kdebug.h 2007-06-06 11:34:11.000000000 +0200
-@@ -12,16 +12,12 @@
-
- int register_die_notifier(struct notifier_block *nb);
- int unregister_die_notifier(struct notifier_block *nb);
--int register_page_fault_notifier(struct notifier_block *nb);
--int unregister_page_fault_notifier(struct notifier_block *nb);
- extern struct atomic_notifier_head avr32_die_chain;
-
- /* Grossly misnamed. */
- enum die_val {
-- DIE_FAULT,
- DIE_BREAKPOINT,
- DIE_SSTEP,
-- DIE_PAGE_FAULT,
- };
+-#define put_unaligned(val, ptr) \
+- ({ __typeof__(*(ptr)) __tmp = (val); \
+- memmove((ptr), &__tmp, sizeof(*(ptr))); \
+- (void)0; })
++#include <asm-generic/unaligned.h>
- static inline int notify_die(enum die_val val, struct pt_regs *regs,
-@@ -35,4 +31,18 @@
- return atomic_notifier_call_chain(&avr32_die_chain, val, &args);
- }
+ #endif /* __ASM_AVR32_UNALIGNED_H */
+diff -x .git -Nur linux-2.6.22.1/include/linux/leds.h linux-avr32.git/include/linux/leds.h
+--- linux-2.6.22.1/include/linux/leds.h 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/include/linux/leds.h 2007-07-12 14:00:30.000000000 +0200
+@@ -110,4 +110,18 @@
+ #define ledtrig_ide_activity() do {} while(0)
+ #endif
++/* For the leds-gpio driver */
++struct gpio_led {
++ const char *name;
++ char *default_trigger;
++ unsigned gpio;
++ u8 active_low;
++};
++
++struct gpio_led_platform_data {
++ int num_leds;
++ struct gpio_led *leds;
++};
++
++
+ #endif /* __LINUX_LEDS_H_INCLUDED */
+diff -x .git -Nur linux-2.6.22.1/include/linux/usb/gadgetfs.h linux-avr32.git/include/linux/usb/gadgetfs.h
+--- linux-2.6.22.1/include/linux/usb/gadgetfs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-avr32.git/include/linux/usb/gadgetfs.h 2007-07-12 14:00:31.000000000 +0200
+@@ -0,0 +1,81 @@
++#ifndef __LINUX_USB_GADGETFS_H
++#define __LINUX_USB_GADGETFS_H
++
++#include <asm/types.h>
++#include <asm/ioctl.h>
++
++#include <linux/usb/ch9.h>
++
+/*
-+ * These are only here because kprobes.c wants them to implement a
-+ * blatant layering violation. Will hopefully go away soon once all
-+ * architectures are updated.
++ * Filesystem based user-mode API to USB Gadget controller hardware
++ *
++ * Other than ep0 operations, most things are done by read() and write()
++ * on endpoint files found in one directory. They are configured by
++ * writing descriptors, and then may be used for normal stream style
++ * i/o requests. When ep0 is configured, the device can enumerate;
++ * when it's closed, the device disconnects from usb. Operations on
++ * ep0 require ioctl() operations.
++ *
++ * Configuration and device descriptors get written to /dev/gadget/$CHIP,
++ * which may then be used to read usb_gadgetfs_event structs. The driver
++ * may activate endpoints as it handles SET_CONFIGURATION setup events,
++ * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
++ * then performing data transfers by reading or writing.
+ */
-+static inline int register_page_fault_notifier(struct notifier_block *nb)
-+{
-+ return 0;
-+}
-+static inline int unregister_page_fault_notifier(struct notifier_block *nb)
-+{
-+ return 0;
-+}
+
- #endif /* __ASM_AVR32_KDEBUG_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/kprobes.h avr32-git/include/asm-avr32/kprobes.h
---- linux-2.6.21.3/include/asm-avr32/kprobes.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/kprobes.h 2007-06-06 11:34:11.000000000 +0200
-@@ -26,6 +26,7 @@
- kprobe_opcode_t insn[MAX_INSN_SIZE];
- };
-
-+extern int kprobe_fault_handler(struct pt_regs *regs, int trapnr);
- extern int kprobe_exceptions_notify(struct notifier_block *self,
- unsigned long val, void *data);
-
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/pgtable.h avr32-git/include/asm-avr32/pgtable.h
---- linux-2.6.21.3/include/asm-avr32/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/pgtable.h 2007-06-06 11:34:11.000000000 +0200
-@@ -394,10 +394,6 @@
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- /* No page table caches to initialize (?) */
- #define pgtable_cache_init() do { } while(0)
-
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/processor.h avr32-git/include/asm-avr32/processor.h
---- linux-2.6.21.3/include/asm-avr32/processor.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/processor.h 2007-06-06 11:34:11.000000000 +0200
-@@ -40,6 +40,14 @@
- TLB_INVALID
- };
-
-+#define AVR32_FEATURE_RMW (1 << 0)
-+#define AVR32_FEATURE_DSP (1 << 1)
-+#define AVR32_FEATURE_SIMD (1 << 2)
-+#define AVR32_FEATURE_OCD (1 << 3)
-+#define AVR32_FEATURE_PCTR (1 << 4)
-+#define AVR32_FEATURE_JAVA (1 << 5)
-+#define AVR32_FEATURE_FPU (1 << 6)
-+
- struct avr32_cpuinfo {
- struct clk *clk;
- unsigned long loops_per_jiffy;
-@@ -48,6 +56,7 @@
- unsigned short arch_revision;
- unsigned short cpu_revision;
- enum tlb_config tlb_config;
-+ unsigned long features;
-
- struct cache_info icache;
- struct cache_info dcache;
-@@ -125,10 +134,10 @@
- #define thread_saved_pc(tsk) ((tsk)->thread.cpu_context.pc)
-
- struct pt_regs;
--void show_trace(struct task_struct *task, unsigned long *stack,
-- struct pt_regs *regs);
--
- extern unsigned long get_wchan(struct task_struct *p);
-+extern void show_regs_log_lvl(struct pt_regs *regs, const char *log_lvl);
-+extern void show_stack_log_lvl(struct task_struct *tsk, unsigned long sp,
-+ struct pt_regs *regs, const char *log_lvl);
-
- #define KSTK_EIP(tsk) ((tsk)->thread.cpu_context.pc)
- #define KSTK_ESP(tsk) ((tsk)->thread.cpu_context.ksp)
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/scatterlist.h avr32-git/include/asm-avr32/scatterlist.h
---- linux-2.6.21.3/include/asm-avr32/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/scatterlist.h 2007-06-06 11:34:11.000000000 +0200
-@@ -1,6 +1,8 @@
- #ifndef __ASM_AVR32_SCATTERLIST_H
- #define __ASM_AVR32_SCATTERLIST_H
-
-+#include <asm/types.h>
++/*
++ * Events are delivered on the ep0 file descriptor, when the user mode driver
++ * reads from this file descriptor after writing the descriptors. Don't
++ * stop polling this descriptor.
++ */
+
- struct scatterlist {
- struct page *page;
- unsigned int offset;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/setup.h avr32-git/include/asm-avr32/setup.h
---- linux-2.6.21.3/include/asm-avr32/setup.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/setup.h 2007-06-06 11:34:11.000000000 +0200
-@@ -110,7 +110,7 @@
- int (*parse)(struct tag *);
- };
-
--#define __tag __attribute_used__ __attribute__((__section__(".taglist")))
-+#define __tag __attribute_used__ __attribute__((__section__(".taglist.init")))
- #define __tagtable(tag, fn) \
- static struct tagtable __tagtable_##fn __tag = { tag, fn }
-
-@@ -124,19 +124,12 @@
- #define for_each_tag(t,base) \
- for (t = base; t->hdr.size; t = tag_next(t))
++enum usb_gadgetfs_event_type {
++ GADGETFS_NOP = 0,
++
++ GADGETFS_CONNECT,
++ GADGETFS_DISCONNECT,
++ GADGETFS_SETUP,
++ GADGETFS_SUSPEND,
++ // and likely more !
++};
++
++/* NOTE: this structure must stay the same size and layout on
++ * both 32-bit and 64-bit kernels.
++ */
++struct usb_gadgetfs_event {
++ union {
++ // NOP, DISCONNECT, SUSPEND: nothing
++ // ... some hardware can't report disconnection
++
++ // CONNECT: just the speed
++ enum usb_device_speed speed;
++
++ // SETUP: packet; DATA phase i/o precedes next event
++ // (setup.bmRequestType & USB_DIR_IN) flags direction
++ // ... includes SET_CONFIGURATION, SET_INTERFACE
++ struct usb_ctrlrequest setup;
++ } u;
++ enum usb_gadgetfs_event_type type;
++};
++
++
++/* endpoint ioctls */
++
++/* IN transfers may be reported to the gadget driver as complete
++ * when the fifo is loaded, before the host reads the data;
++ * OUT transfers may be reported to the host's "client" driver as
++ * complete when they're sitting in the FIFO unread.
++ * THIS returns how many bytes are "unclaimed" in the endpoint fifo
++ * (needed for precise fault handling, when the hardware allows it)
++ */
++#define GADGETFS_FIFO_STATUS _IO('g',1)
++
++/* discards any unclaimed data in the fifo. */
++#define GADGETFS_FIFO_FLUSH _IO('g',2)
++
++/* resets endpoint halt+toggle; used to implement set_interface.
++ * some hardware (like pxa2xx) can't support this.
++ */
++#define GADGETFS_CLEAR_HALT _IO('g',3)
++
++#endif /* __LINUX_USB_GADGETFS_H */
+diff -x .git -Nur linux-2.6.22.1/include/linux/usb/Kbuild linux-avr32.git/include/linux/usb/Kbuild
+--- linux-2.6.22.1/include/linux/usb/Kbuild 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/include/linux/usb/Kbuild 2007-07-12 14:00:31.000000000 +0200
+@@ -1,5 +1,6 @@
+ unifdef-y += audio.h
+ unifdef-y += cdc.h
+ unifdef-y += ch9.h
++unifdef-y += gadgetfs.h
+ unifdef-y += midi.h
--extern struct tag_mem_range *mem_phys;
--extern struct tag_mem_range *mem_reserved;
--extern struct tag_mem_range *mem_ramdisk;
--
- extern struct tag *bootloader_tags;
-
--extern void setup_bootmem(void);
--extern void setup_processor(void);
--extern void board_setup_fbmem(unsigned long fbmem_start,
-- unsigned long fbmem_size);
-+extern resource_size_t fbmem_start;
-+extern resource_size_t fbmem_size;
-
--/* Chip-specific hook to enable the use of SDRAM */
--void chip_enable_sdram(void);
-+void setup_processor(void);
-
- #endif /* !__ASSEMBLY__ */
-
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/sysreg.h avr32-git/include/asm-avr32/sysreg.h
---- linux-2.6.21.3/include/asm-avr32/sysreg.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/sysreg.h 2007-06-06 11:34:11.000000000 +0200
-@@ -7,326 +7,281 @@
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
--#ifndef __ASM_AVR32_SYSREG_H__
--#define __ASM_AVR32_SYSREG_H__
-+#ifndef __ASM_AVR32_SYSREG_H
-+#define __ASM_AVR32_SYSREG_H
-
- /* sysreg register offsets */
--#define SYSREG_SR 0x0000
--#define SYSREG_EVBA 0x0004
--#define SYSREG_ACBA 0x0008
--#define SYSREG_CPUCR 0x000c
--#define SYSREG_ECR 0x0010
--#define SYSREG_RSR_SUP 0x0014
--#define SYSREG_RSR_INT0 0x0018
--#define SYSREG_RSR_INT1 0x001c
--#define SYSREG_RSR_INT2 0x0020
--#define SYSREG_RSR_INT3 0x0024
--#define SYSREG_RSR_EX 0x0028
--#define SYSREG_RSR_NMI 0x002c
--#define SYSREG_RSR_DBG 0x0030
--#define SYSREG_RAR_SUP 0x0034
--#define SYSREG_RAR_INT0 0x0038
--#define SYSREG_RAR_INT1 0x003c
--#define SYSREG_RAR_INT2 0x0040
--#define SYSREG_RAR_INT3 0x0044
--#define SYSREG_RAR_EX 0x0048
--#define SYSREG_RAR_NMI 0x004c
--#define SYSREG_RAR_DBG 0x0050
--#define SYSREG_JECR 0x0054
--#define SYSREG_JOSP 0x0058
--#define SYSREG_JAVA_LV0 0x005c
--#define SYSREG_JAVA_LV1 0x0060
--#define SYSREG_JAVA_LV2 0x0064
--#define SYSREG_JAVA_LV3 0x0068
--#define SYSREG_JAVA_LV4 0x006c
--#define SYSREG_JAVA_LV5 0x0070
--#define SYSREG_JAVA_LV6 0x0074
--#define SYSREG_JAVA_LV7 0x0078
--#define SYSREG_JTBA 0x007c
--#define SYSREG_JBCR 0x0080
--#define SYSREG_CONFIG0 0x0100
--#define SYSREG_CONFIG1 0x0104
--#define SYSREG_COUNT 0x0108
--#define SYSREG_COMPARE 0x010c
--#define SYSREG_TLBEHI 0x0110
--#define SYSREG_TLBELO 0x0114
--#define SYSREG_PTBR 0x0118
--#define SYSREG_TLBEAR 0x011c
--#define SYSREG_MMUCR 0x0120
--#define SYSREG_TLBARLO 0x0124
--#define SYSREG_TLBARHI 0x0128
--#define SYSREG_PCCNT 0x012c
--#define SYSREG_PCNT0 0x0130
--#define SYSREG_PCNT1 0x0134
--#define SYSREG_PCCR 0x0138
--#define SYSREG_BEAR 0x013c
-+#define SYSREG_SR 0x0000
-+#define SYSREG_EVBA 0x0004
-+#define SYSREG_ACBA 0x0008
-+#define SYSREG_CPUCR 0x000c
-+#define SYSREG_ECR 0x0010
-+#define SYSREG_RSR_SUP 0x0014
-+#define SYSREG_RSR_INT0 0x0018
-+#define SYSREG_RSR_INT1 0x001c
-+#define SYSREG_RSR_INT2 0x0020
-+#define SYSREG_RSR_INT3 0x0024
-+#define SYSREG_RSR_EX 0x0028
-+#define SYSREG_RSR_NMI 0x002c
-+#define SYSREG_RSR_DBG 0x0030
-+#define SYSREG_RAR_SUP 0x0034
-+#define SYSREG_RAR_INT0 0x0038
-+#define SYSREG_RAR_INT1 0x003c
-+#define SYSREG_RAR_INT2 0x0040
-+#define SYSREG_RAR_INT3 0x0044
-+#define SYSREG_RAR_EX 0x0048
-+#define SYSREG_RAR_NMI 0x004c
-+#define SYSREG_RAR_DBG 0x0050
-+#define SYSREG_JECR 0x0054
-+#define SYSREG_JOSP 0x0058
-+#define SYSREG_JAVA_LV0 0x005c
-+#define SYSREG_JAVA_LV1 0x0060
-+#define SYSREG_JAVA_LV2 0x0064
-+#define SYSREG_JAVA_LV3 0x0068
-+#define SYSREG_JAVA_LV4 0x006c
-+#define SYSREG_JAVA_LV5 0x0070
-+#define SYSREG_JAVA_LV6 0x0074
-+#define SYSREG_JAVA_LV7 0x0078
-+#define SYSREG_JTBA 0x007c
-+#define SYSREG_JBCR 0x0080
-+#define SYSREG_CONFIG0 0x0100
-+#define SYSREG_CONFIG1 0x0104
-+#define SYSREG_COUNT 0x0108
-+#define SYSREG_COMPARE 0x010c
-+#define SYSREG_TLBEHI 0x0110
-+#define SYSREG_TLBELO 0x0114
-+#define SYSREG_PTBR 0x0118
-+#define SYSREG_TLBEAR 0x011c
-+#define SYSREG_MMUCR 0x0120
-+#define SYSREG_TLBARLO 0x0124
-+#define SYSREG_TLBARHI 0x0128
-+#define SYSREG_PCCNT 0x012c
-+#define SYSREG_PCNT0 0x0130
-+#define SYSREG_PCNT1 0x0134
-+#define SYSREG_PCCR 0x0138
-+#define SYSREG_BEAR 0x013c
-+#define SYSREG_SABAL 0x0300
-+#define SYSREG_SABAH 0x0304
-+#define SYSREG_SABD 0x0308
-
- /* Bitfields in SR */
--#define SYSREG_SR_C_OFFSET 0
--#define SYSREG_SR_C_SIZE 1
--#define SYSREG_Z_OFFSET 1
--#define SYSREG_Z_SIZE 1
--#define SYSREG_SR_N_OFFSET 2
--#define SYSREG_SR_N_SIZE 1
--#define SYSREG_SR_V_OFFSET 3
--#define SYSREG_SR_V_SIZE 1
--#define SYSREG_Q_OFFSET 4
--#define SYSREG_Q_SIZE 1
--#define SYSREG_GM_OFFSET 16
--#define SYSREG_GM_SIZE 1
--#define SYSREG_I0M_OFFSET 17
--#define SYSREG_I0M_SIZE 1
--#define SYSREG_I1M_OFFSET 18
--#define SYSREG_I1M_SIZE 1
--#define SYSREG_I2M_OFFSET 19
--#define SYSREG_I2M_SIZE 1
--#define SYSREG_I3M_OFFSET 20
--#define SYSREG_I3M_SIZE 1
--#define SYSREG_EM_OFFSET 21
--#define SYSREG_EM_SIZE 1
--#define SYSREG_M0_OFFSET 22
--#define SYSREG_M0_SIZE 1
--#define SYSREG_M1_OFFSET 23
--#define SYSREG_M1_SIZE 1
--#define SYSREG_M2_OFFSET 24
--#define SYSREG_M2_SIZE 1
--#define SYSREG_SR_D_OFFSET 26
--#define SYSREG_SR_D_SIZE 1
--#define SYSREG_DM_OFFSET 27
--#define SYSREG_DM_SIZE 1
--#define SYSREG_SR_J_OFFSET 28
--#define SYSREG_SR_J_SIZE 1
--#define SYSREG_R_OFFSET 29
--#define SYSREG_R_SIZE 1
--#define SYSREG_H_OFFSET 30
--#define SYSREG_H_SIZE 1
--
--/* Bitfields in EVBA */
--
--/* Bitfields in ACBA */
-+#define SYSREG_SR_C_OFFSET 0
-+#define SYSREG_SR_C_SIZE 1
-+#define SYSREG_Z_OFFSET 1
-+#define SYSREG_Z_SIZE 1
-+#define SYSREG_SR_N_OFFSET 2
-+#define SYSREG_SR_N_SIZE 1
-+#define SYSREG_SR_V_OFFSET 3
-+#define SYSREG_SR_V_SIZE 1
-+#define SYSREG_Q_OFFSET 4
-+#define SYSREG_Q_SIZE 1
-+#define SYSREG_L_OFFSET 5
-+#define SYSREG_L_SIZE 1
-+#define SYSREG_T_OFFSET 14
-+#define SYSREG_T_SIZE 1
-+#define SYSREG_SR_R_OFFSET 15
-+#define SYSREG_SR_R_SIZE 1
-+#define SYSREG_GM_OFFSET 16
-+#define SYSREG_GM_SIZE 1
-+#define SYSREG_I0M_OFFSET 17
-+#define SYSREG_I0M_SIZE 1
-+#define SYSREG_I1M_OFFSET 18
-+#define SYSREG_I1M_SIZE 1
-+#define SYSREG_I2M_OFFSET 19
-+#define SYSREG_I2M_SIZE 1
-+#define SYSREG_I3M_OFFSET 20
-+#define SYSREG_I3M_SIZE 1
-+#define SYSREG_EM_OFFSET 21
-+#define SYSREG_EM_SIZE 1
-+#define SYSREG_M0_OFFSET 22
-+#define SYSREG_M0_SIZE 1
-+#define SYSREG_M1_OFFSET 23
-+#define SYSREG_M1_SIZE 1
-+#define SYSREG_M2_OFFSET 24
-+#define SYSREG_M2_SIZE 1
-+#define SYSREG_SR_D_OFFSET 26
-+#define SYSREG_SR_D_SIZE 1
-+#define SYSREG_DM_OFFSET 27
-+#define SYSREG_DM_SIZE 1
-+#define SYSREG_SR_J_OFFSET 28
-+#define SYSREG_SR_J_SIZE 1
-+#define SYSREG_H_OFFSET 29
-+#define SYSREG_H_SIZE 1
-
- /* Bitfields in CPUCR */
--#define SYSREG_BI_OFFSET 0
--#define SYSREG_BI_SIZE 1
--#define SYSREG_BE_OFFSET 1
--#define SYSREG_BE_SIZE 1
--#define SYSREG_FE_OFFSET 2
--#define SYSREG_FE_SIZE 1
--#define SYSREG_RE_OFFSET 3
--#define SYSREG_RE_SIZE 1
--#define SYSREG_IBE_OFFSET 4
--#define SYSREG_IBE_SIZE 1
--#define SYSREG_IEE_OFFSET 5
--#define SYSREG_IEE_SIZE 1
--
--/* Bitfields in ECR */
--#define SYSREG_ECR_OFFSET 0
--#define SYSREG_ECR_SIZE 32
--
--/* Bitfields in RSR_SUP */
--
--/* Bitfields in RSR_INT0 */
--
--/* Bitfields in RSR_INT1 */
--
--/* Bitfields in RSR_INT2 */
--
--/* Bitfields in RSR_INT3 */
--
--/* Bitfields in RSR_EX */
--
--/* Bitfields in RSR_NMI */
--
--/* Bitfields in RSR_DBG */
--
--/* Bitfields in RAR_SUP */
--
--/* Bitfields in RAR_INT0 */
--
--/* Bitfields in RAR_INT1 */
--
--/* Bitfields in RAR_INT2 */
--
--/* Bitfields in RAR_INT3 */
--
--/* Bitfields in RAR_EX */
--
--/* Bitfields in RAR_NMI */
--
--/* Bitfields in RAR_DBG */
--
--/* Bitfields in JECR */
--
--/* Bitfields in JOSP */
+diff -x .git -Nur linux-2.6.22.1/include/linux/usb_gadgetfs.h linux-avr32.git/include/linux/usb_gadgetfs.h
+--- linux-2.6.22.1/include/linux/usb_gadgetfs.h 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/include/linux/usb_gadgetfs.h 1970-01-01 01:00:00.000000000 +0100
+@@ -1,75 +0,0 @@
-
--/* Bitfields in JAVA_LV0 */
+-#include <asm/types.h>
+-#include <asm/ioctl.h>
-
--/* Bitfields in JAVA_LV1 */
+-#include <linux/usb/ch9.h>
-
--/* Bitfields in JAVA_LV2 */
--
--/* Bitfields in JAVA_LV3 */
--
--/* Bitfields in JAVA_LV4 */
--
--/* Bitfields in JAVA_LV5 */
--
--/* Bitfields in JAVA_LV6 */
--
--/* Bitfields in JAVA_LV7 */
--
--/* Bitfields in JTBA */
--
--/* Bitfields in JBCR */
-+#define SYSREG_BI_OFFSET 0
-+#define SYSREG_BI_SIZE 1
-+#define SYSREG_BE_OFFSET 1
-+#define SYSREG_BE_SIZE 1
-+#define SYSREG_FE_OFFSET 2
-+#define SYSREG_FE_SIZE 1
-+#define SYSREG_RE_OFFSET 3
-+#define SYSREG_RE_SIZE 1
-+#define SYSREG_IBE_OFFSET 4
-+#define SYSREG_IBE_SIZE 1
-+#define SYSREG_IEE_OFFSET 5
-+#define SYSREG_IEE_SIZE 1
-
- /* Bitfields in CONFIG0 */
--#define SYSREG_CONFIG0_D_OFFSET 1
--#define SYSREG_CONFIG0_D_SIZE 1
--#define SYSREG_CONFIG0_S_OFFSET 2
--#define SYSREG_CONFIG0_S_SIZE 1
--#define SYSREG_O_OFFSET 3
--#define SYSREG_O_SIZE 1
--#define SYSREG_P_OFFSET 4
--#define SYSREG_P_SIZE 1
--#define SYSREG_CONFIG0_J_OFFSET 5
--#define SYSREG_CONFIG0_J_SIZE 1
--#define SYSREG_F_OFFSET 6
--#define SYSREG_F_SIZE 1
--#define SYSREG_MMUT_OFFSET 7
--#define SYSREG_MMUT_SIZE 3
--#define SYSREG_AR_OFFSET 10
--#define SYSREG_AR_SIZE 3
--#define SYSREG_AT_OFFSET 13
--#define SYSREG_AT_SIZE 3
--#define SYSREG_PROCESSORREVISION_OFFSET 16
--#define SYSREG_PROCESSORREVISION_SIZE 8
--#define SYSREG_PROCESSORID_OFFSET 24
--#define SYSREG_PROCESSORID_SIZE 8
-+#define SYSREG_CONFIG0_R_OFFSET 0
-+#define SYSREG_CONFIG0_R_SIZE 1
-+#define SYSREG_CONFIG0_D_OFFSET 1
-+#define SYSREG_CONFIG0_D_SIZE 1
-+#define SYSREG_CONFIG0_S_OFFSET 2
-+#define SYSREG_CONFIG0_S_SIZE 1
-+#define SYSREG_CONFIG0_O_OFFSET 3
-+#define SYSREG_CONFIG0_O_SIZE 1
-+#define SYSREG_CONFIG0_P_OFFSET 4
-+#define SYSREG_CONFIG0_P_SIZE 1
-+#define SYSREG_CONFIG0_J_OFFSET 5
-+#define SYSREG_CONFIG0_J_SIZE 1
-+#define SYSREG_CONFIG0_F_OFFSET 6
-+#define SYSREG_CONFIG0_F_SIZE 1
-+#define SYSREG_MMUT_OFFSET 7
-+#define SYSREG_MMUT_SIZE 3
-+#define SYSREG_AR_OFFSET 10
-+#define SYSREG_AR_SIZE 3
-+#define SYSREG_AT_OFFSET 13
-+#define SYSREG_AT_SIZE 3
-+#define SYSREG_PROCESSORREVISION_OFFSET 16
-+#define SYSREG_PROCESSORREVISION_SIZE 8
-+#define SYSREG_PROCESSORID_OFFSET 24
-+#define SYSREG_PROCESSORID_SIZE 8
-
- /* Bitfields in CONFIG1 */
--#define SYSREG_DASS_OFFSET 0
--#define SYSREG_DASS_SIZE 3
--#define SYSREG_DLSZ_OFFSET 3
--#define SYSREG_DLSZ_SIZE 3
--#define SYSREG_DSET_OFFSET 6
--#define SYSREG_DSET_SIZE 4
--#define SYSREG_IASS_OFFSET 10
--#define SYSREG_IASS_SIZE 2
--#define SYSREG_ILSZ_OFFSET 13
--#define SYSREG_ILSZ_SIZE 3
--#define SYSREG_ISET_OFFSET 16
--#define SYSREG_ISET_SIZE 4
--#define SYSREG_DMMUSZ_OFFSET 20
--#define SYSREG_DMMUSZ_SIZE 6
--#define SYSREG_IMMUSZ_OFFSET 26
--#define SYSREG_IMMUSZ_SIZE 6
--
--/* Bitfields in COUNT */
--
--/* Bitfields in COMPARE */
-+#define SYSREG_DASS_OFFSET 0
-+#define SYSREG_DASS_SIZE 3
-+#define SYSREG_DLSZ_OFFSET 3
-+#define SYSREG_DLSZ_SIZE 3
-+#define SYSREG_DSET_OFFSET 6
-+#define SYSREG_DSET_SIZE 4
-+#define SYSREG_IASS_OFFSET 10
-+#define SYSREG_IASS_SIZE 3
-+#define SYSREG_ILSZ_OFFSET 13
-+#define SYSREG_ILSZ_SIZE 3
-+#define SYSREG_ISET_OFFSET 16
-+#define SYSREG_ISET_SIZE 4
-+#define SYSREG_DMMUSZ_OFFSET 20
-+#define SYSREG_DMMUSZ_SIZE 6
-+#define SYSREG_IMMUSZ_OFFSET 26
-+#define SYSREG_IMMUSZ_SIZE 6
-
- /* Bitfields in TLBEHI */
--#define SYSREG_ASID_OFFSET 0
--#define SYSREG_ASID_SIZE 8
--#define SYSREG_TLBEHI_I_OFFSET 8
--#define SYSREG_TLBEHI_I_SIZE 1
--#define SYSREG_TLBEHI_V_OFFSET 9
--#define SYSREG_TLBEHI_V_SIZE 1
--#define SYSREG_VPN_OFFSET 10
--#define SYSREG_VPN_SIZE 22
-+#define SYSREG_ASID_OFFSET 0
-+#define SYSREG_ASID_SIZE 8
-+#define SYSREG_TLBEHI_I_OFFSET 8
-+#define SYSREG_TLBEHI_I_SIZE 1
-+#define SYSREG_TLBEHI_V_OFFSET 9
-+#define SYSREG_TLBEHI_V_SIZE 1
-+#define SYSREG_VPN_OFFSET 10
-+#define SYSREG_VPN_SIZE 22
-
- /* Bitfields in TLBELO */
--#define SYSREG_W_OFFSET 0
--#define SYSREG_W_SIZE 1
--#define SYSREG_TLBELO_D_OFFSET 1
--#define SYSREG_TLBELO_D_SIZE 1
--#define SYSREG_SZ_OFFSET 2
--#define SYSREG_SZ_SIZE 2
--#define SYSREG_AP_OFFSET 4
--#define SYSREG_AP_SIZE 3
--#define SYSREG_B_OFFSET 7
--#define SYSREG_B_SIZE 1
--#define SYSREG_G_OFFSET 8
--#define SYSREG_G_SIZE 1
--#define SYSREG_TLBELO_C_OFFSET 9
--#define SYSREG_TLBELO_C_SIZE 1
--#define SYSREG_PFN_OFFSET 10
--#define SYSREG_PFN_SIZE 22
--
--/* Bitfields in PTBR */
--
--/* Bitfields in TLBEAR */
-+#define SYSREG_W_OFFSET 0
-+#define SYSREG_W_SIZE 1
-+#define SYSREG_TLBELO_D_OFFSET 1
-+#define SYSREG_TLBELO_D_SIZE 1
-+#define SYSREG_SZ_OFFSET 2
-+#define SYSREG_SZ_SIZE 2
-+#define SYSREG_AP_OFFSET 4
-+#define SYSREG_AP_SIZE 3
-+#define SYSREG_B_OFFSET 7
-+#define SYSREG_B_SIZE 1
-+#define SYSREG_G_OFFSET 8
-+#define SYSREG_G_SIZE 1
-+#define SYSREG_TLBELO_C_OFFSET 9
-+#define SYSREG_TLBELO_C_SIZE 1
-+#define SYSREG_PFN_OFFSET 10
-+#define SYSREG_PFN_SIZE 22
-
- /* Bitfields in MMUCR */
--#define SYSREG_E_OFFSET 0
--#define SYSREG_E_SIZE 1
--#define SYSREG_M_OFFSET 1
--#define SYSREG_M_SIZE 1
--#define SYSREG_MMUCR_I_OFFSET 2
--#define SYSREG_MMUCR_I_SIZE 1
--#define SYSREG_MMUCR_N_OFFSET 3
--#define SYSREG_MMUCR_N_SIZE 1
--#define SYSREG_MMUCR_S_OFFSET 4
--#define SYSREG_MMUCR_S_SIZE 1
--#define SYSREG_DLA_OFFSET 8
--#define SYSREG_DLA_SIZE 6
--#define SYSREG_DRP_OFFSET 14
--#define SYSREG_DRP_SIZE 6
--#define SYSREG_ILA_OFFSET 20
--#define SYSREG_ILA_SIZE 6
--#define SYSREG_IRP_OFFSET 26
--#define SYSREG_IRP_SIZE 6
--
--/* Bitfields in TLBARLO */
+-/*
+- * Filesystem based user-mode API to USB Gadget controller hardware
+- *
+- * Almost everything can be done with only read and write operations,
+- * on endpoint files found in one directory. They are configured by
+- * writing descriptors, and then may be used for normal stream style
+- * i/o requests. When ep0 is configured, the device can enumerate;
+- * when it's closed, the device disconnects from usb.
+- *
+- * Configuration and device descriptors get written to /dev/gadget/$CHIP,
+- * which may then be used to read usb_gadgetfs_event structs. The driver
+- * may activate endpoints as it handles SET_CONFIGURATION setup events,
+- * or earlier; writing endpoint descriptors to /dev/gadget/$ENDPOINT
+- * then performing data transfers by reading or writing.
+- */
-
--/* Bitfields in TLBARHI */
+-/*
+- * Events are delivered on the ep0 file descriptor, if the user mode driver
+- * reads from this file descriptor after writing the descriptors. Don't
+- * stop polling this descriptor, if you write that kind of driver.
+- */
-
--/* Bitfields in PCCNT */
+-enum usb_gadgetfs_event_type {
+- GADGETFS_NOP = 0,
-
--/* Bitfields in PCNT0 */
+- GADGETFS_CONNECT,
+- GADGETFS_DISCONNECT,
+- GADGETFS_SETUP,
+- GADGETFS_SUSPEND,
+- // and likely more !
+-};
-
--/* Bitfields in PCNT1 */
-+#define SYSREG_E_OFFSET 0
-+#define SYSREG_E_SIZE 1
-+#define SYSREG_M_OFFSET 1
-+#define SYSREG_M_SIZE 1
-+#define SYSREG_MMUCR_I_OFFSET 2
-+#define SYSREG_MMUCR_I_SIZE 1
-+#define SYSREG_MMUCR_N_OFFSET 3
-+#define SYSREG_MMUCR_N_SIZE 1
-+#define SYSREG_MMUCR_S_OFFSET 4
-+#define SYSREG_MMUCR_S_SIZE 1
-+#define SYSREG_DLA_OFFSET 8
-+#define SYSREG_DLA_SIZE 6
-+#define SYSREG_DRP_OFFSET 14
-+#define SYSREG_DRP_SIZE 6
-+#define SYSREG_ILA_OFFSET 20
-+#define SYSREG_ILA_SIZE 6
-+#define SYSREG_IRP_OFFSET 26
-+#define SYSREG_IRP_SIZE 6
-
- /* Bitfields in PCCR */
+-struct usb_gadgetfs_event {
+- enum usb_gadgetfs_event_type type;
+- union {
+- // NOP, DISCONNECT, SUSPEND: nothing
+- // ... some hardware can't report disconnection
-
--/* Bitfields in BEAR */
-+#define SYSREG_PCCR_R_OFFSET 1
-+#define SYSREG_PCCR_R_SIZE 1
-+#define SYSREG_PCCR_C_OFFSET 2
-+#define SYSREG_PCCR_C_SIZE 1
-+#define SYSREG_PCCR_S_OFFSET 3
-+#define SYSREG_PCCR_S_SIZE 1
-+#define SYSREG_IEC_OFFSET 4
-+#define SYSREG_IEC_SIZE 1
-+#define SYSREG_IE0_OFFSET 5
-+#define SYSREG_IE0_SIZE 1
-+#define SYSREG_IE1_OFFSET 6
-+#define SYSREG_IE1_SIZE 1
-+#define SYSREG_FC_OFFSET 8
-+#define SYSREG_FC_SIZE 1
-+#define SYSREG_F0_OFFSET 9
-+#define SYSREG_F0_SIZE 1
-+#define SYSREG_F1_OFFSET 10
-+#define SYSREG_F1_SIZE 1
-+#define SYSREG_CONF0_OFFSET 12
-+#define SYSREG_CONF0_SIZE 6
-+#define SYSREG_CONF1_OFFSET 18
-+#define SYSREG_CONF1_SIZE 6
-
- /* Constants for ECR */
--#define ECR_UNRECOVERABLE 0
--#define ECR_TLB_MULTIPLE 1
--#define ECR_BUS_ERROR_WRITE 2
--#define ECR_BUS_ERROR_READ 3
--#define ECR_NMI 4
--#define ECR_ADDR_ALIGN_X 5
--#define ECR_PROTECTION_X 6
--#define ECR_DEBUG 7
--#define ECR_ILLEGAL_OPCODE 8
--#define ECR_UNIMPL_INSTRUCTION 9
--#define ECR_PRIVILEGE_VIOLATION 10
--#define ECR_FPE 11
--#define ECR_COPROC_ABSENT 12
--#define ECR_ADDR_ALIGN_R 13
--#define ECR_ADDR_ALIGN_W 14
--#define ECR_PROTECTION_R 15
--#define ECR_PROTECTION_W 16
--#define ECR_DTLB_MODIFIED 17
--#define ECR_TLB_MISS_X 20
--#define ECR_TLB_MISS_R 24
--#define ECR_TLB_MISS_W 28
-+#define ECR_UNRECOVERABLE 0
-+#define ECR_TLB_MULTIPLE 1
-+#define ECR_BUS_ERROR_WRITE 2
-+#define ECR_BUS_ERROR_READ 3
-+#define ECR_NMI 4
-+#define ECR_ADDR_ALIGN_X 5
-+#define ECR_PROTECTION_X 6
-+#define ECR_DEBUG 7
-+#define ECR_ILLEGAL_OPCODE 8
-+#define ECR_UNIMPL_INSTRUCTION 9
-+#define ECR_PRIVILEGE_VIOLATION 10
-+#define ECR_FPE 11
-+#define ECR_COPROC_ABSENT 12
-+#define ECR_ADDR_ALIGN_R 13
-+#define ECR_ADDR_ALIGN_W 14
-+#define ECR_PROTECTION_R 15
-+#define ECR_PROTECTION_W 16
-+#define ECR_DTLB_MODIFIED 17
-+#define ECR_TLB_MISS_X 20
-+#define ECR_TLB_MISS_R 24
-+#define ECR_TLB_MISS_W 28
-
- /* Bit manipulation macros */
--#define SYSREG_BIT(name) (1 << SYSREG_##name##_OFFSET)
--#define SYSREG_BF(name,value) (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) << SYSREG_##name##_OFFSET)
--#define SYSREG_BFEXT(name,value) (((value) >> SYSREG_##name##_OFFSET) & ((1 << SYSREG_##name##_SIZE) - 1))
--#define SYSREG_BFINS(name,value,old) (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) << SYSREG_##name##_OFFSET)) | SYSREG_BF(name,value))
-+#define SYSREG_BIT(name) \
-+ (1 << SYSREG_##name##_OFFSET)
-+#define SYSREG_BF(name,value) \
-+ (((value) & ((1 << SYSREG_##name##_SIZE) - 1)) \
-+ << SYSREG_##name##_OFFSET)
-+#define SYSREG_BFEXT(name,value)\
-+ (((value) >> SYSREG_##name##_OFFSET) \
-+ & ((1 << SYSREG_##name##_SIZE) - 1))
-+#define SYSREG_BFINS(name,value,old) \
-+ (((old) & ~(((1 << SYSREG_##name##_SIZE) - 1) \
-+ << SYSREG_##name##_OFFSET)) \
-+ | SYSREG_BF(name,value))
-
-+/* Register access macros */
- #ifdef __CHECKER__
- extern unsigned long __builtin_mfsr(unsigned long reg);
- extern void __builtin_mtsr(unsigned long reg, unsigned long value);
- #endif
-
--/* Register access macros */
--#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg)
--#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value)
-+#define sysreg_read(reg) __builtin_mfsr(SYSREG_##reg)
-+#define sysreg_write(reg, value) __builtin_mtsr(SYSREG_##reg, value)
-
--#endif /* __ASM_AVR32_SYSREG_H__ */
-+#endif /* __ASM_AVR32_SYSREG_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/system.h avr32-git/include/asm-avr32/system.h
---- linux-2.6.21.3/include/asm-avr32/system.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/system.h 2007-06-06 11:34:11.000000000 +0200
-@@ -9,6 +9,7 @@
- #define __ASM_AVR32_SYSTEM_H
-
- #include <linux/compiler.h>
-+#include <linux/linkage.h>
- #include <linux/types.h>
-
- #include <asm/ptrace.h>
-@@ -140,15 +141,9 @@
- sizeof(*(ptr))))
-
- struct pt_regs;
--extern void __die(const char *, struct pt_regs *, unsigned long,
-- const char *, const char *, unsigned long);
--extern void __die_if_kernel(const char *, struct pt_regs *, unsigned long,
-- const char *, const char *, unsigned long);
--
--#define die(msg, regs, err) \
-- __die(msg, regs, err, __FILE__ ":", __FUNCTION__, __LINE__)
--#define die_if_kernel(msg, regs, err) \
-- __die_if_kernel(msg, regs, err, __FILE__ ":", __FUNCTION__, __LINE__)
-+void NORET_TYPE die(const char *str, struct pt_regs *regs, long err);
-+void _exception(long signr, struct pt_regs *regs, int code,
-+ unsigned long addr);
-
- #define arch_align_stack(x) (x)
-
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/thread_info.h avr32-git/include/asm-avr32/thread_info.h
---- linux-2.6.21.3/include/asm-avr32/thread_info.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/thread_info.h 2007-06-06 11:34:11.000000000 +0200
-@@ -83,6 +83,7 @@
- #define TIF_SINGLE_STEP 6 /* single step after next break */
- #define TIF_MEMDIE 7
- #define TIF_RESTORE_SIGMASK 8 /* restore signal mask in do_signal */
-+#define TIF_CPU_GOING_TO_SLEEP 9 /* CPU is entering sleep 0 mode */
- #define TIF_USERSPACE 31 /* true if FS sets userspace */
-
- #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
-@@ -94,6 +95,7 @@
- #define _TIF_SINGLE_STEP (1 << TIF_SINGLE_STEP)
- #define _TIF_MEMDIE (1 << TIF_MEMDIE)
- #define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
-+#define _TIF_CPU_GOING_TO_SLEEP (1 << TIF_CPU_GOING_TO_SLEEP)
-
- /* XXX: These two masks must never span more than 16 bits! */
- /* work to do on interrupt/exception return */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/uaccess.h avr32-git/include/asm-avr32/uaccess.h
---- linux-2.6.21.3/include/asm-avr32/uaccess.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/uaccess.h 2007-06-06 11:34:11.000000000 +0200
-@@ -181,24 +181,23 @@
-
- #define __get_user_nocheck(x, ptr, size) \
- ({ \
-- typeof(*(ptr)) __gu_val = (typeof(*(ptr)) __force)0; \
-+ unsigned long __gu_val = 0; \
- int __gu_err = 0; \
- \
- switch (size) { \
- case 1: __get_user_asm("ub", __gu_val, ptr, __gu_err); break; \
- case 2: __get_user_asm("uh", __gu_val, ptr, __gu_err); break; \
- case 4: __get_user_asm("w", __gu_val, ptr, __gu_err); break; \
-- case 8: __get_user_asm("d", __gu_val, ptr, __gu_err); break; \
- default: __gu_err = __get_user_bad(); break; \
- } \
- \
-- x = __gu_val; \
-+ x = (typeof(*(ptr)))__gu_val; \
- __gu_err; \
- })
-
- #define __get_user_check(x, ptr, size) \
- ({ \
-- typeof(*(ptr)) __gu_val = (typeof(*(ptr)) __force)0; \
-+ unsigned long __gu_val = 0; \
- const typeof(*(ptr)) __user * __gu_addr = (ptr); \
- int __gu_err = 0; \
- \
-@@ -216,10 +215,6 @@
- __get_user_asm("w", __gu_val, __gu_addr, \
- __gu_err); \
- break; \
-- case 8: \
-- __get_user_asm("d", __gu_val, __gu_addr, \
-- __gu_err); \
-- break; \
- default: \
- __gu_err = __get_user_bad(); \
- break; \
-@@ -227,7 +222,7 @@
- } else { \
- __gu_err = -EFAULT; \
- } \
-- x = __gu_val; \
-+ x = (typeof(*(ptr)))__gu_val; \
- __gu_err; \
- })
-
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-avr32/unaligned.h avr32-git/include/asm-avr32/unaligned.h
---- linux-2.6.21.3/include/asm-avr32/unaligned.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-avr32/unaligned.h 2007-06-06 11:34:11.000000000 +0200
-@@ -6,20 +6,31 @@
- * implementation. The AVR32 AP implementation can handle unaligned
- * words, but halfwords must be halfword-aligned, and doublewords must
- * be word-aligned.
-- *
-- * TODO: Make all this CPU-specific and optimize.
- */
-
--#include <linux/string.h>
-+#include <asm-generic/unaligned.h>
-
--/* Use memmove here, so gcc does not insert a __builtin_memcpy. */
-+#ifdef CONFIG_CPU_AT32AP7000
-
-+/* REVISIT calling memmove() may be smaller for 64-bit values ... */
-+
-+#undef get_unaligned
- #define get_unaligned(ptr) \
-- ({ __typeof__(*(ptr)) __tmp; memmove(&__tmp, (ptr), sizeof(*(ptr))); __tmp; })
-+ ___get_unaligned(ptr, sizeof((*ptr)))
-+#define ___get_unaligned(ptr, size) \
-+ ((size == 4) ? *(ptr) : __get_unaligned(ptr, size))
-+
-+#undef put_unaligned
-+#define put_unaligned(val, ptr) \
-+ ___put_unaligned((__u64)(val), ptr, sizeof((*ptr)))
-+#define ___put_unaligned(val, ptr, size) \
-+do { \
-+ if (size == 4) \
-+ *(ptr) = (val); \
-+ else \
-+ __put_unaligned(val, ptr, size); \
-+} while (0)
-
--#define put_unaligned(val, ptr) \
-- ({ __typeof__(*(ptr)) __tmp = (val); \
-- memmove((ptr), &__tmp, sizeof(*(ptr))); \
-- (void)0; })
-+#endif
-
- #endif /* __ASM_AVR32_UNALIGNED_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-frv/pgtable.h avr32-git/include/asm-frv/pgtable.h
---- linux-2.6.21.3/include/asm-frv/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-frv/pgtable.h 2007-06-06 11:34:11.000000000 +0200
-@@ -509,10 +509,6 @@
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
+- // CONNECT: just the speed
+- enum usb_device_speed speed;
-
- #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
- #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
- #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-frv/scatterlist.h avr32-git/include/asm-frv/scatterlist.h
---- linux-2.6.21.3/include/asm-frv/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-frv/scatterlist.h 2007-06-06 11:34:11.000000000 +0200
-@@ -1,6 +1,8 @@
- #ifndef _ASM_SCATTERLIST_H
- #define _ASM_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- /*
- * Drivers must set either ->address or (preferred) ->page and ->offset
- * to indicate where data must be transferred to/from.
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-h8300/pgtable.h avr32-git/include/asm-h8300/pgtable.h
---- linux-2.6.21.3/include/asm-h8300/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-h8300/pgtable.h 2007-06-06 11:34:12.000000000 +0200
-@@ -55,10 +55,6 @@
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- /*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-h8300/scatterlist.h avr32-git/include/asm-h8300/scatterlist.h
---- linux-2.6.21.3/include/asm-h8300/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-h8300/scatterlist.h 2007-06-06 11:34:12.000000000 +0200
-@@ -1,6 +1,8 @@
- #ifndef _H8300_SCATTERLIST_H
- #define _H8300_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page *page;
- unsigned int offset;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-i386/pgtable.h avr32-git/include/asm-i386/pgtable.h
---- linux-2.6.21.3/include/asm-i386/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-i386/pgtable.h 2007-06-06 11:34:12.000000000 +0200
-@@ -519,10 +519,6 @@
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
+- // SETUP: packet; DATA phase i/o precedes next event
+- // (setup.bmRequestType & USB_DIR_IN) flags direction
+- // ... includes SET_CONFIGURATION, SET_INTERFACE
+- struct usb_ctrlrequest setup;
+- } u;
+-};
-
- #include <asm-generic/pgtable.h>
-
- #endif /* _I386_PGTABLE_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-i386/scatterlist.h avr32-git/include/asm-i386/scatterlist.h
---- linux-2.6.21.3/include/asm-i386/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-i386/scatterlist.h 2007-06-06 11:34:12.000000000 +0200
-@@ -1,6 +1,8 @@
- #ifndef _I386_SCATTERLIST_H
- #define _I386_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page *page;
- unsigned int offset;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-ia64/pgtable.h avr32-git/include/asm-ia64/pgtable.h
---- linux-2.6.21.3/include/asm-ia64/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-ia64/pgtable.h 2007-06-06 11:34:12.000000000 +0200
-@@ -485,10 +485,6 @@
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
-
- /*
- * ZERO_PAGE is a global shared page that is always zero: used
- * for zero-mapped memory areas etc..
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-ia64/scatterlist.h avr32-git/include/asm-ia64/scatterlist.h
---- linux-2.6.21.3/include/asm-ia64/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-ia64/scatterlist.h 2007-06-06 11:34:12.000000000 +0200
-@@ -6,6 +6,8 @@
- * David Mosberger-Tang <davidm@hpl.hp.com>, Hewlett-Packard Co
- */
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page *page;
- unsigned int offset;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-m32r/pgtable.h avr32-git/include/asm-m32r/pgtable.h
---- linux-2.6.21.3/include/asm-m32r/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-m32r/pgtable.h 2007-06-06 11:34:12.000000000 +0200
-@@ -381,10 +381,6 @@
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
+-/* endpoint ioctls */
-
- #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_YOUNG
- #define __HAVE_ARCH_PTEP_TEST_AND_CLEAR_DIRTY
- #define __HAVE_ARCH_PTEP_GET_AND_CLEAR
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-m32r/scatterlist.h avr32-git/include/asm-m32r/scatterlist.h
---- linux-2.6.21.3/include/asm-m32r/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-m32r/scatterlist.h 2007-06-06 11:34:12.000000000 +0200
-@@ -1,6 +1,8 @@
- #ifndef _ASM_M32R_SCATTERLIST_H
- #define _ASM_M32R_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- char * address; /* Location data is to be transferred to, NULL for
- * highmem page */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-m68k/pgtable.h avr32-git/include/asm-m68k/pgtable.h
---- linux-2.6.21.3/include/asm-m68k/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-m68k/pgtable.h 2007-06-06 11:34:12.000000000 +0200
-@@ -143,10 +143,6 @@
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
+-/* IN transfers may be reported to the gadget driver as complete
+- * when the fifo is loaded, before the host reads the data;
+- * OUT transfers may be reported to the host's "client" driver as
+- * complete when they're sitting in the FIFO unread.
+- * THIS returns how many bytes are "unclaimed" in the endpoint fifo
+- * (needed for precise fault handling, when the hardware allows it)
+- */
+-#define GADGETFS_FIFO_STATUS _IO('g',1)
-
- /* MMU-specific headers */
-
- #ifdef CONFIG_SUN3
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-m68knommu/pgtable.h avr32-git/include/asm-m68knommu/pgtable.h
---- linux-2.6.21.3/include/asm-m68knommu/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-m68knommu/pgtable.h 2007-06-06 11:34:12.000000000 +0200
-@@ -59,10 +59,6 @@
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
+-/* discards any unclaimed data in the fifo. */
+-#define GADGETFS_FIFO_FLUSH _IO('g',2)
-
- /*
- * All 32bit addresses are effectively valid for vmalloc...
- * Sort of meaningless for non-VM targets.
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-m68knommu/scatterlist.h avr32-git/include/asm-m68knommu/scatterlist.h
---- linux-2.6.21.3/include/asm-m68knommu/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-m68knommu/scatterlist.h 2007-06-06 11:34:12.000000000 +0200
-@@ -2,6 +2,7 @@
- #define _M68KNOMMU_SCATTERLIST_H
-
- #include <linux/mm.h>
-+#include <asm/types.h>
-
- struct scatterlist {
- struct page *page;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-mips/pgtable.h avr32-git/include/asm-mips/pgtable.h
---- linux-2.6.21.3/include/asm-mips/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-mips/pgtable.h 2007-06-06 11:34:12.000000000 +0200
-@@ -387,10 +387,6 @@
- remap_pfn_range(vma, vaddr, pfn, size, prot)
- #endif
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
+-/* resets endpoint halt+toggle; used to implement set_interface.
+- * some hardware (like pxa2xx) can't support this.
+- */
+-#define GADGETFS_CLEAR_HALT _IO('g',3)
-
- #include <asm-generic/pgtable.h>
-
- /*
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-mips/scatterlist.h avr32-git/include/asm-mips/scatterlist.h
---- linux-2.6.21.3/include/asm-mips/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-mips/scatterlist.h 2007-06-06 11:34:12.000000000 +0200
-@@ -1,6 +1,8 @@
- #ifndef __ASM_SCATTERLIST_H
- #define __ASM_SCATTERLIST_H
-
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page * page;
- unsigned int offset;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-parisc/pgtable.h avr32-git/include/asm-parisc/pgtable.h
---- linux-2.6.21.3/include/asm-parisc/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-parisc/pgtable.h 2007-06-06 11:34:12.000000000 +0200
-@@ -528,10 +528,6 @@
-
- #define pgprot_noncached(prot) __pgprot(pgprot_val(prot) | _PAGE_NO_CACHE)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
-
- /* We provide our own get_unmapped_area to provide cache coherency */
-
- #define HAVE_ARCH_UNMAPPED_AREA
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-parisc/scatterlist.h avr32-git/include/asm-parisc/scatterlist.h
---- linux-2.6.21.3/include/asm-parisc/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-parisc/scatterlist.h 2007-06-06 11:34:12.000000000 +0200
-@@ -2,6 +2,7 @@
- #define _ASM_PARISC_SCATTERLIST_H
-
- #include <asm/page.h>
-+#include <asm/types.h>
+diff -x .git -Nur linux-2.6.22.1/init/do_mounts.c linux-avr32.git/init/do_mounts.c
+--- linux-2.6.22.1/init/do_mounts.c 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/init/do_mounts.c 2007-07-12 14:00:31.000000000 +0200
+@@ -25,6 +25,7 @@
+ int root_mountflags = MS_RDONLY | MS_SILENT;
+ char * __initdata root_device_name;
+ static char __initdata saved_root_name[64];
++int __initdata root_wait;
- struct scatterlist {
- struct page *page;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-ppc/pgtable.h avr32-git/include/asm-ppc/pgtable.h
---- linux-2.6.21.3/include/asm-ppc/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-ppc/pgtable.h 2007-06-06 11:34:13.000000000 +0200
-@@ -827,10 +827,6 @@
- remap_pfn_range(vma, vaddr, pfn, size, prot)
- #endif
+ dev_t ROOT_DEV;
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- /*
- * No page table caches to initialise
- */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-sh/pgtable.h avr32-git/include/asm-sh/pgtable.h
---- linux-2.6.21.3/include/asm-sh/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-sh/pgtable.h 2007-06-06 11:34:13.000000000 +0200
-@@ -568,10 +568,6 @@
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- struct mm_struct;
+@@ -216,6 +217,14 @@
- /*
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-sh/scatterlist.h avr32-git/include/asm-sh/scatterlist.h
---- linux-2.6.21.3/include/asm-sh/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-sh/scatterlist.h 2007-06-06 11:34:13.000000000 +0200
-@@ -1,6 +1,8 @@
- #ifndef __ASM_SH_SCATTERLIST_H
- #define __ASM_SH_SCATTERLIST_H
+ __setup("root=", root_dev_setup);
-+#include <asm/types.h>
++static int __init rootwait_setup(char *line)
++{
++ root_wait = simple_strtol(line,NULL,0);
++ return 1;
++}
+
- struct scatterlist {
- struct page * page; /* Location for highmem page, if any */
- unsigned int offset;/* for highmem, page offset */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-sh64/pgtable.h avr32-git/include/asm-sh64/pgtable.h
---- linux-2.6.21.3/include/asm-sh64/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-sh64/pgtable.h 2007-06-06 11:34:13.000000000 +0200
-@@ -485,10 +485,6 @@
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #endif /* !__ASSEMBLY__ */
-
- /*
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-sh64/scatterlist.h avr32-git/include/asm-sh64/scatterlist.h
---- linux-2.6.21.3/include/asm-sh64/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-sh64/scatterlist.h 2007-06-06 11:34:13.000000000 +0200
-@@ -11,6 +11,8 @@
- #ifndef __ASM_SH64_SCATTERLIST_H
- #define __ASM_SH64_SCATTERLIST_H
-
-+#include <asm/types.h>
++__setup("rootwait=", rootwait_setup);
+
- struct scatterlist {
- struct page * page; /* Location for highmem page, if any */
- unsigned int offset;/* for highmem, page offset */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-sparc64/scatterlist.h avr32-git/include/asm-sparc64/scatterlist.h
---- linux-2.6.21.3/include/asm-sparc64/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-sparc64/scatterlist.h 2007-06-06 11:34:13.000000000 +0200
-@@ -3,6 +3,7 @@
- #define _SPARC64_SCATTERLIST_H
-
- #include <asm/page.h>
-+#include <asm/types.h>
-
- struct scatterlist {
- struct page *page;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-v850/scatterlist.h avr32-git/include/asm-v850/scatterlist.h
---- linux-2.6.21.3/include/asm-v850/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-v850/scatterlist.h 2007-06-06 11:34:13.000000000 +0200
-@@ -14,6 +14,8 @@
- #ifndef __V850_SCATTERLIST_H__
- #define __V850_SCATTERLIST_H__
+ static char * __initdata root_mount_data;
+ static int __init root_data_setup(char *str)
+ {
+@@ -438,11 +447,24 @@
+ root_device_name += 5;
+ }
-+#include <asm/types.h>
+- is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
+-
+ if (initrd_load())
+ goto out;
+
++ /* wait for any asynchronous scanning to complete */
++ if ((ROOT_DEV == 0) && root_wait) {
++ printk(KERN_INFO "Waiting for root device %s...\n",
++ saved_root_name);
++ do {
++ while (driver_probe_done() != 0)
++ msleep(100);
++ ROOT_DEV = name_to_dev_t(saved_root_name);
++ if (ROOT_DEV == 0)
++ msleep(100);
++ } while (ROOT_DEV == 0);
++ }
+
- struct scatterlist {
- struct page *page;
- unsigned offset;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-x86_64/pgtable.h avr32-git/include/asm-x86_64/pgtable.h
---- linux-2.6.21.3/include/asm-x86_64/pgtable.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-x86_64/pgtable.h 2007-06-06 11:34:13.000000000 +0200
-@@ -413,10 +413,6 @@
- #define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
- remap_pfn_range(vma, vaddr, pfn, size, prot)
-
--#define MK_IOSPACE_PFN(space, pfn) (pfn)
--#define GET_IOSPACE(pfn) 0
--#define GET_PFN(pfn) (pfn)
--
- #define HAVE_ARCH_UNMAPPED_AREA
-
- #define pgtable_cache_init() do { } while (0)
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-x86_64/scatterlist.h avr32-git/include/asm-x86_64/scatterlist.h
---- linux-2.6.21.3/include/asm-x86_64/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-x86_64/scatterlist.h 2007-06-06 11:34:13.000000000 +0200
-@@ -1,6 +1,8 @@
- #ifndef _X8664_SCATTERLIST_H
- #define _X8664_SCATTERLIST_H
-
-+#include <asm/types.h>
++ is_floppy = MAJOR(ROOT_DEV) == FLOPPY_MAJOR;
+
- struct scatterlist {
- struct page *page;
- unsigned int offset;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/asm-xtensa/scatterlist.h avr32-git/include/asm-xtensa/scatterlist.h
---- linux-2.6.21.3/include/asm-xtensa/scatterlist.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/asm-xtensa/scatterlist.h 2007-06-06 11:34:13.000000000 +0200
-@@ -11,6 +11,8 @@
- #ifndef _XTENSA_SCATTERLIST_H
- #define _XTENSA_SCATTERLIST_H
+ if (is_floppy && rd_doload && rd_load_disk(0))
+ ROOT_DEV = Root_RAM0;
-+#include <asm/types.h>
-+
- struct scatterlist {
- struct page *page;
- unsigned int offset;
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/linux/fb.h avr32-git/include/linux/fb.h
---- linux-2.6.21.3/include/linux/fb.h 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/include/linux/fb.h 2007-06-06 11:34:13.000000000 +0200
-@@ -833,7 +833,7 @@
- #define fb_writeq sbus_writeq
- #define fb_memset sbus_memset_io
-
--#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__)
-+#elif defined(__i386__) || defined(__alpha__) || defined(__x86_64__) || defined(__hppa__) || (defined(__sh__) && !defined(__SH5__)) || defined(__powerpc__) || defined(__avr32__)
-
- #define fb_readb __raw_readb
- #define fb_readw __raw_readw
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/linux/i2c-gpio.h avr32-git/include/linux/i2c-gpio.h
---- linux-2.6.21.3/include/linux/i2c-gpio.h 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/include/linux/i2c-gpio.h 2007-06-06 11:34:13.000000000 +0200
-@@ -0,0 +1,38 @@
-+/*
-+ * i2c-gpio interface to platform code
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+#ifndef _LINUX_I2C_GPIO_H
-+#define _LINUX_I2C_GPIO_H
-+
-+/**
-+ * struct i2c_gpio_platform_data - Platform-dependent data for i2c-gpio
-+ * @sda_pin: GPIO pin ID to use for SDA
-+ * @scl_pin: GPIO pin ID to use for SCL
-+ * @udelay: signal toggle delay. SCL frequency is (500 / udelay) kHz
-+ * @timeout: clock stretching timeout in jiffies. If the slave keeps
-+ * SCL low for longer than this, the transfer will time out.
-+ * @sda_is_open_drain: SDA is configured as open drain, i.e. the pin
-+ * isn't actively driven high when setting the output value high.
-+ * gpio_get_value() must return the actual pin state even if the
-+ * pin is configured as an output.
-+ * @scl_is_open_drain: SCL is set up as open drain. Same requirements
-+ * as for sda_is_open_drain apply.
-+ * @scl_is_output_only: SCL output drivers cannot be turned off.
-+ */
-+struct i2c_gpio_platform_data {
-+ unsigned int sda_pin;
-+ unsigned int scl_pin;
-+ int udelay;
-+ int timeout;
-+ unsigned int sda_is_open_drain:1;
-+ unsigned int scl_is_open_drain:1;
-+ unsigned int scl_is_output_only:1;
-+};
-+
-+#endif /* _LINUX_I2C_GPIO_H */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/include/video/atmel_lcdc.h avr32-git/include/video/atmel_lcdc.h
---- linux-2.6.21.3/include/video/atmel_lcdc.h 1970-01-01 01:00:00.000000000 +0100
-+++ avr32-git/include/video/atmel_lcdc.h 2007-06-06 11:34:13.000000000 +0200
-@@ -0,0 +1,196 @@
-+/*
-+ * Header file for AT91/AT32 LCD Controller
-+ *
-+ * Data structure and register user interface
-+ *
-+ * Copyright (C) 2007 Atmel Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ */
-+#ifndef __ATMEL_LCDC_H__
-+#define __ATMEL_LCDC_H__
-+
-+ /* LCD Controller info data structure */
-+struct atmel_lcdfb_info {
-+ spinlock_t lock;
-+ struct fb_info *info;
-+ void __iomem *mmio;
-+ unsigned long irq_base;
-+
-+ unsigned int guard_time;
-+ struct platform_device *pdev;
-+ struct clk *bus_clk;
-+ struct clk *lcdc_clk;
-+ unsigned int default_bpp;
-+ unsigned int default_lcdcon2;
-+ unsigned int default_dmacon;
-+ void (*atmel_lcdfb_power_control)(int on);
-+ struct fb_monspecs *default_monspecs;
-+ u32 pseudo_palette[16];
-+};
-+
-+#define ATMEL_LCDC_DMABADDR1 0x00
-+#define ATMEL_LCDC_DMABADDR2 0x04
-+#define ATMEL_LCDC_DMAFRMPT1 0x08
-+#define ATMEL_LCDC_DMAFRMPT2 0x0c
-+#define ATMEL_LCDC_DMAFRMADD1 0x10
-+#define ATMEL_LCDC_DMAFRMADD2 0x14
-+
-+#define ATMEL_LCDC_DMAFRMCFG 0x18
-+#define ATMEL_LCDC_FRSIZE (0x7fffff << 0)
-+#define ATMEL_LCDC_BLENGTH_OFFSET 24
-+#define ATMEL_LCDC_BLENGTH (0x7f << ATMEL_LCDC_BLENGTH_OFFSET)
-+
-+#define ATMEL_LCDC_DMACON 0x1c
-+#define ATMEL_LCDC_DMAEN (0x1 << 0)
-+#define ATMEL_LCDC_DMARST (0x1 << 1)
-+#define ATMEL_LCDC_DMABUSY (0x1 << 2)
-+#define ATMEL_LCDC_DMAUPDT (0x1 << 3)
-+#define ATMEL_LCDC_DMA2DEN (0x1 << 4)
-+
-+#define ATMEL_LCDC_DMA2DCFG 0x20
-+#define ATMEL_LCDC_ADDRINC_OFFSET 0
-+#define ATMEL_LCDC_ADDRINC (0xffff)
-+#define ATMEL_LCDC_PIXELOFF_OFFSET 24
-+#define ATMEL_LCDC_PIXELOFF (0x1f << 24)
-+
-+#define ATMEL_LCDC_LCDCON1 0x0800
-+#define ATMEL_LCDC_BYPASS (1 << 0)
-+#define ATMEL_LCDC_CLKVAL_OFFSET 12
-+#define ATMEL_LCDC_CLKVAL (0x1ff << ATMEL_LCDC_CLKVAL_OFFSET)
-+#define ATMEL_LCDC_LINCNT (0x7ff << 21)
-+
-+#define ATMEL_LCDC_LCDCON2 0x0804
-+#define ATMEL_LCDC_DISTYPE (3 << 0)
-+#define ATMEL_LCDC_DISTYPE_STNMONO (0 << 0)
-+#define ATMEL_LCDC_DISTYPE_STNCOLOR (1 << 0)
-+#define ATMEL_LCDC_DISTYPE_TFT (2 << 0)
-+#define ATMEL_LCDC_SCANMOD (1 << 2)
-+#define ATMEL_LCDC_SCANMOD_SINGLE (0 << 2)
-+#define ATMEL_LCDC_SCANMOD_DUAL (1 << 2)
-+#define ATMEL_LCDC_IFWIDTH (3 << 3)
-+#define ATMEL_LCDC_IFWIDTH_4 (0 << 3)
-+#define ATMEL_LCDC_IFWIDTH_8 (1 << 3)
-+#define ATMEL_LCDC_IFWIDTH_16 (2 << 3)
-+#define ATMEL_LCDC_PIXELSIZE (7 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_1 (0 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_2 (1 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_4 (2 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_8 (3 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_16 (4 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_24 (5 << 5)
-+#define ATMEL_LCDC_PIXELSIZE_32 (6 << 5)
-+#define ATMEL_LCDC_INVVD (1 << 8)
-+#define ATMEL_LCDC_INVVD_NORMAL (0 << 8)
-+#define ATMEL_LCDC_INVVD_INVERTED (1 << 8)
-+#define ATMEL_LCDC_INVFRAME (1 << 9 )
-+#define ATMEL_LCDC_INVFRAME_NORMAL (0 << 9)
-+#define ATMEL_LCDC_INVFRAME_INVERTED (1 << 9)
-+#define ATMEL_LCDC_INVLINE (1 << 10)
-+#define ATMEL_LCDC_INVLINE_NORMAL (0 << 10)
-+#define ATMEL_LCDC_INVLINE_INVERTED (1 << 10)
-+#define ATMEL_LCDC_INVCLK (1 << 11)
-+#define ATMEL_LCDC_INVCLK_NORMAL (0 << 11)
-+#define ATMEL_LCDC_INVCLK_INVERTED (1 << 11)
-+#define ATMEL_LCDC_INVDVAL (1 << 12)
-+#define ATMEL_LCDC_INVDVAL_NORMAL (0 << 12)
-+#define ATMEL_LCDC_INVDVAL_INVERTED (1 << 12)
-+#define ATMEL_LCDC_CLKMOD (1 << 15)
-+#define ATMEL_LCDC_CLKMOD_ACTIVEDISPLAY (0 << 15)
-+#define ATMEL_LCDC_CLKMOD_ALWAYSACTIVE (1 << 15)
-+#define ATMEL_LCDC_MEMOR (1 << 31)
-+#define ATMEL_LCDC_MEMOR_BIG (0 << 31)
-+#define ATMEL_LCDC_MEMOR_LITTLE (1 << 31)
-+
-+#define ATMEL_LCDC_TIM1 0x0808
-+#define ATMEL_LCDC_VFP (0xff << 0)
-+#define ATMEL_LCDC_VBP_OFFSET 8
-+#define ATMEL_LCDC_VBP (0xff << ATMEL_LCDC_VBP_OFFSET)
-+#define ATMEL_LCDC_VPW_OFFSET 16
-+#define ATMEL_LCDC_VPW (0x3f << ATMEL_LCDC_VPW_OFFSET)
-+#define ATMEL_LCDC_VHDLY_OFFSET 24
-+#define ATMEL_LCDC_VHDLY (0xf << ATMEL_LCDC_VHDLY_OFFSET)
-+
-+#define ATMEL_LCDC_TIM2 0x080c
-+#define ATMEL_LCDC_HBP (0xff << 0)
-+#define ATMEL_LCDC_HPW_OFFSET 8
-+#define ATMEL_LCDC_HPW (0x3f << ATMEL_LCDC_HPW_OFFSET)
-+#define ATMEL_LCDC_HFP_OFFSET 21
-+#define ATMEL_LCDC_HFP (0x7ff << ATMEL_LCDC_HFP_OFFSET)
-+
-+#define ATMEL_LCDC_LCDFRMCFG 0x0810
-+#define ATMEL_LCDC_LINEVAL (0x7ff << 0)
-+#define ATMEL_LCDC_HOZVAL_OFFSET 21
-+#define ATMEL_LCDC_HOZVAL (0x7ff << ATMEL_LCDC_HOZVAL_OFFSET)
-+
-+#define ATMEL_LCDC_FIFO 0x0814
-+#define ATMEL_LCDC_FIFOTH (0xffff)
-+
-+#define ATMEL_LCDC_MVAL 0x0818
-+
-+#define ATMEL_LCDC_DP1_2 0x081c
-+#define ATMEL_LCDC_DP4_7 0x0820
-+#define ATMEL_LCDC_DP3_5 0x0824
-+#define ATMEL_LCDC_DP2_3 0x0828
-+#define ATMEL_LCDC_DP5_7 0x082c
-+#define ATMEL_LCDC_DP3_4 0x0830
-+#define ATMEL_LCDC_DP4_5 0x0834
-+#define ATMEL_LCDC_DP6_7 0x0838
-+#define ATMEL_LCDC_DP1_2_VAL (0xff)
-+#define ATMEL_LCDC_DP4_7_VAL (0xfffffff)
-+#define ATMEL_LCDC_DP3_5_VAL (0xfffff)
-+#define ATMEL_LCDC_DP2_3_VAL (0xfff)
-+#define ATMEL_LCDC_DP5_7_VAL (0xfffffff)
-+#define ATMEL_LCDC_DP3_4_VAL (0xffff)
-+#define ATMEL_LCDC_DP4_5_VAL (0xfffff)
-+#define ATMEL_LCDC_DP6_7_VAL (0xfffffff)
-+
-+#define ATMEL_LCDC_PWRCON 0x083c
-+#define ATMEL_LCDC_PWR (1 << 0)
-+#define ATMEL_LCDC_GUARDT_OFFSET 1
-+#define ATMEL_LCDC_GUARDT (0x7f << ATMEL_LCDC_GUARDT_OFFSET)
-+#define ATMEL_LCDC_BUSY (1 << 31)
-+
-+#define ATMEL_LCDC_CONTRAST_CTR 0x0840
-+#define ATMEL_LCDC_PS (3 << 0)
-+#define ATMEL_LCDC_PS_DIV1 (0 << 0)
-+#define ATMEL_LCDC_PS_DIV2 (1 << 0)
-+#define ATMEL_LCDC_PS_DIV4 (2 << 0)
-+#define ATMEL_LCDC_PS_DIV8 (3 << 0)
-+#define ATMEL_LCDC_POL (1 << 2)
-+#define ATMEL_LCDC_POL_NEGATIVE (0 << 2)
-+#define ATMEL_LCDC_POL_POSITIVE (1 << 2)
-+#define ATMEL_LCDC_ENA (1 << 3)
-+#define ATMEL_LCDC_ENA_PWMDISABLE (0 << 3)
-+#define ATMEL_LCDC_ENA_PWMENABLE (1 << 3)
-+
-+#define ATMEL_LCDC_CONTRAST_VAL 0x0844
-+#define ATMEL_LCDC_CVAL (0xff)
-+
-+#define ATMEL_LCDC_IER 0x0848
-+#define ATMEL_LCDC_IDR 0x084c
-+#define ATMEL_LCDC_IMR 0x0850
-+#define ATMEL_LCDC_ISR 0x0854
-+#define ATMEL_LCDC_ICR 0x0858
-+#define ATMEL_LCDC_LNI (1 << 0)
-+#define ATMEL_LCDC_LSTLNI (1 << 1)
-+#define ATMEL_LCDC_EOFI (1 << 2)
-+#define ATMEL_LCDC_UFLWI (1 << 4)
-+#define ATMEL_LCDC_OWRI (1 << 5)
-+#define ATMEL_LCDC_MERI (1 << 6)
-+
-+#define ATMEL_LCDC_LUT(n) (0x0c00 + ((n)*4))
-+
-+#endif /* __ATMEL_LCDC_H__ */
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/MAINTAINERS avr32-git/MAINTAINERS
---- linux-2.6.21.3/MAINTAINERS 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/MAINTAINERS 2007-06-06 11:33:46.000000000 +0200
-@@ -1434,6 +1434,11 @@
- W: http://www.icp-vortex.com/
+diff -x .git -Nur linux-2.6.22.1/MAINTAINERS linux-avr32.git/MAINTAINERS
+--- linux-2.6.22.1/MAINTAINERS 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/MAINTAINERS 2007-07-12 13:59:48.000000000 +0200
+@@ -674,6 +674,13 @@
+ M: hskinnemoen@atmel.com
S: Supported
-+GENERIC GPIO I2C DRIVER
++ATMEL USBA UDC DRIVER
+P: Haavard Skinnemoen
+M: hskinnemoen@atmel.com
++L: kernel@avr32linux.org
++W: http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
+S: Supported
+
- GENERIC HDLC DRIVER, N2, C101, PCI200SYN and WANXL DRIVERS
- P: Krzysztof Halasa
- M: khc@pm.waw.pl
-diff -Nur -x .gitignore -x .git linux-2.6.21.3/scripts/checkstack.pl avr32-git/scripts/checkstack.pl
---- linux-2.6.21.3/scripts/checkstack.pl 2007-05-24 23:22:47.000000000 +0200
-+++ avr32-git/scripts/checkstack.pl 2007-06-06 11:34:14.000000000 +0200
+ ATMEL WIRELESS DRIVER
+ P: Simon Kelley
+ M: simon@thekelleys.org.uk
+diff -x .git -Nur linux-2.6.22.1/scripts/checkstack.pl linux-avr32.git/scripts/checkstack.pl
+--- linux-2.6.22.1/scripts/checkstack.pl 2007-07-10 20:56:30.000000000 +0200
++++ linux-avr32.git/scripts/checkstack.pl 2007-06-06 11:34:14.000000000 +0200
@@ -12,6 +12,7 @@
# sh64 port by Paul Mundt
# Random bits by Matt Mackall <mpm@selenic.com>