ipq806x: convert ok to okay in dts

DT spec require okay instead of ok in dts files

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

12 files changed, 184 insertions, 184 deletions

diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 655f9fba37..552d03f789 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -89,9 +89,9 @@
 
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 			serial@16340000 {
-				status = "ok";
+				status = "okay";
 			};
 
 			/*
@@ -104,10 +104,10 @@
 
 		gsbi5: gsbi@1a200000 {
 			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
+			status = "okay";
 
 			spi4: spi@1a280000 {
-				status = "ok";
+				status = "okay";
 				spi-max-frequency = <50000000>;
 
 				pinctrl-0 = <&spi_pins>;
@@ -130,48 +130,48 @@
 		};
 
 		sata-phy@1b400000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@29000000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@0 {
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@1 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie0: pci@1b500000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie1: pci@1b700000 {
-			status = "ok";
+			status = "okay";
 			force_gen1 = <1>;
 		};
 
 		nand@1ac00000 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&nand_pins>;
 			pinctrl-names = "default";
@@ -217,7 +217,7 @@
 		};
 
 		gmac1: ethernet@37200000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			qcom,id = <1>;
 
@@ -231,7 +231,7 @@
 		};
 
 		gmac2: ethernet@37400000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <2>;
 
@@ -244,5 +244,5 @@
 };
 
 &adm_dma {
-	status = "ok";
+	status = "okay";
 };
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
index 7e589be2c3..1dad12cfd6 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
@@ -92,9 +92,9 @@
 
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 			serial@16340000 {
-				status = "ok";
+				status = "okay";
 			};
 
 			/*
@@ -107,10 +107,10 @@
 
 		gsbi5: gsbi@1a200000 {
 			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
+			status = "okay";
 
 			spi4: spi@1a280000 {
-				status = "ok";
+				status = "okay";
 				spi-max-frequency = <50000000>;
 
 				pinctrl-0 = <&spi_pins>;
@@ -133,52 +133,52 @@
 		};
 
 		sata-phy@1b400000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@29000000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@0 {
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@1 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie0: pci@1b500000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie1: pci@1b700000 {
-			status = "ok";
+			status = "okay";
 			force_gen1 = <1>;
 		};
 
 		pcie2: pci@1b900000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		nand@1ac00000 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&nand_pins>;
 			pinctrl-names = "default";
@@ -232,7 +232,7 @@
 		};
 
 		gmac0: ethernet@37000000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			qcom,id = <0>;
 
@@ -247,7 +247,7 @@
 		};
 
 		gmac1: ethernet@37200000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			qcom,id = <1>;
 			mdiobus = <&mdio0>;
@@ -259,7 +259,7 @@
 		};
 
 		gmac2: ethernet@37400000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <2>;
 			mdiobus = <&mdio0>;
@@ -273,5 +273,5 @@
 };
 
 &adm_dma {
-	status = "ok";
+	status = "okay";
 };
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
index c4fb2524c8..de80a11bdf 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
@@ -133,9 +133,9 @@
 
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 			serial@16340000 {
-				status = "ok";
+				status = "okay";
 			};
 			/*
 			 * The i2c device on gsbi4 should not be enabled.
@@ -147,10 +147,10 @@
 
 		gsbi5: gsbi@1a200000 {
 			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
+			status = "okay";
 
 			spi5: spi@1a280000 {
-				status = "ok";
+				status = "okay";
 
 				pinctrl-0 = <&spi_pins>;
 				pinctrl-names = "default";
@@ -316,41 +316,41 @@
 		};
 
 		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@0 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&usb0_pwr_en_pin>;
 			pinctrl-names = "default";
 		};
 
 		usb30@1 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&usb1_pwr_en_pin>;
 			pinctrl-names = "default";
 		};
 
 		pcie0: pci@1b500000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie1: pci@1b700000 {
-			status = "ok";
+			status = "okay";
 			force_gen1 = <1>;
 		};
 
@@ -381,7 +381,7 @@
 		};
 
 		gmac1: ethernet@37200000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			qcom,id = <1>;
 
@@ -398,7 +398,7 @@
 		};
 
 		gmac2: ethernet@37400000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <2>;
 
@@ -490,5 +490,5 @@
 };
 
 &adm_dma {
-	status = "ok";
+	status = "okay";
 };
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
index 1760b1968f..fc7aea0dca 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
@@ -131,9 +131,9 @@
 
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 			serial@16340000 {
-				status = "ok";
+				status = "okay";
 			};
 			/*
 			 * The i2c device on gsbi4 should not be enabled.
@@ -144,53 +144,53 @@
 		};
 
 		sata-phy@1b400000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@29000000 {
 			ports-implemented = <0x1>;
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@0 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&usb0_pwr_en_pins>;
 			pinctrl-names = "default";
 		};
 
 		usb30@1 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&usb1_pwr_en_pins>;
 			pinctrl-names = "default";
 		};
 
 		pcie0: pci@1b500000 {
-			status = "ok";
+			status = "okay";
 			reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&pcie0_pins>;
 			pinctrl-names = "default";
 		};
 
 		pcie1: pci@1b700000 {
-			status = "ok";
+			status = "okay";
 			reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&pcie1_pins>;
 			pinctrl-names = "default";
@@ -198,7 +198,7 @@
 		};
 
 		nand@1ac00000 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&nand_pins>;
 			pinctrl-names = "default";
@@ -301,7 +301,7 @@
 		};
 
 		gmac1: ethernet@37200000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			phy-handle = <&phy4>;
 			qcom,id = <1>;
@@ -313,7 +313,7 @@
 		};
 
 		gmac2: ethernet@37400000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <2>;
 
@@ -404,5 +404,5 @@
 };
 
 &adm_dma {
-	status = "ok";
+	status = "okay";
 };
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
index f4cface193..a873bf94f5 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -60,18 +60,18 @@
 
 		gsbi2: gsbi@12480000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 			uart2: serial@12490000 {
-				status = "ok";
+				status = "okay";
 			};
 		};
 
 		gsbi5: gsbi@1a200000 {
 			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
+			status = "okay";
 
 			spi4: spi@1a280000 {
-				status = "ok";
+				status = "okay";
 				spi-max-frequency = <50000000>;
 
 				pinctrl-0 = <&spi_pins>;
@@ -116,47 +116,47 @@
 		};
 
 		sata-phy@1b400000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@29000000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@0 {
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@1 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie0: pci@1b500000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie1: pci@1b700000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie2: pci@1b900000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		mdio0: mdio {
@@ -195,7 +195,7 @@
 		};
 
 		gmac0: ethernet@37000000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			qcom,id = <0>;
 			phy-handle = <&phy4>;
@@ -205,7 +205,7 @@
 		};
 
 		gmac1: ethernet@37200000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <1>;
 
@@ -216,14 +216,14 @@
 		};
 
 		gmac2: ethernet@37400000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <2>;
 			phy-handle = <&phy6>;
 		};
 
 		gmac3: ethernet@37600000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <3>;
 			phy-handle = <&phy7>;
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
index ca8376afd7..7fe45a8798 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
@@ -111,9 +111,9 @@
 
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 			serial@16340000 {
-				status = "ok";
+				status = "okay";
 			};
 			/*
 			 * The i2c device on gsbi4 should not be enabled.
@@ -124,52 +124,52 @@
 		};
 
 		sata-phy@1b400000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@29000000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@0 {
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@1 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie0: pci@1b500000 {
-			status = "ok";
+			status = "okay";
 			force_gen1 = <1>;
 		};
 
 		pcie1: pci@1b700000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie2: pci@1b900000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		nand@1ac00000 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&nand_pins>;
 			pinctrl-names = "default";
@@ -317,7 +317,7 @@
 		};
 
 		gmac1: ethernet@37200000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			qcom,id = <1>;
 			qcom,phy_mdio_addr = <4>;
@@ -333,7 +333,7 @@
 		};
 		//lan
 		gmac2: ethernet@37400000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <2>;
 			qcom,phy_mdio_addr = <0>;	/* none */
@@ -347,7 +347,7 @@
 		};
 
 		adm_dma: dma@18300000 {
-			status = "ok";
+			status = "okay";
 		};
 	};
 
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
index b6505dd541..9755567560 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
@@ -112,9 +112,9 @@
 
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 			serial@16340000 {
-				status = "ok";
+				status = "okay";
 			};
 			/*
 			 * The i2c device on gsbi4 should not be enabled.
@@ -125,54 +125,54 @@
 		};
 
 		sata-phy@1b400000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@29000000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8800 {		/* USB3 port 1 HS phy */
 			clocks = <&gcc USB30_0_UTMI_CLK>;
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8830 {		/* USB3 port 1 SS phy */
 			clocks = <&gcc USB30_0_MASTER_CLK>;
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8800 {		/* USB3 port 0 HS phy */
 			clocks = <&gcc USB30_1_UTMI_CLK>;
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8830 {		/* USB3 port 0 SS phy */
 			clocks = <&gcc USB30_1_MASTER_CLK>;
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@0 {
 			clocks = <&gcc USB30_1_MASTER_CLK>;
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@1 {
 			clocks = <&gcc USB30_0_MASTER_CLK>;
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie0: pci@1b500000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie1: pci@1b700000 {
-			status = "ok";
+			status = "okay";
 			force_gen1 = <1>;
 		};
 
 		nand@1ac00000 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&nand_pins>;
 			pinctrl-names = "default";
@@ -266,7 +266,7 @@
 		};
 
 		gmac1: ethernet@37200000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			qcom,id = <1>;
 
@@ -282,7 +282,7 @@
 		};
 
 		gmac2: ethernet@37400000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <2>;
 
@@ -378,5 +378,5 @@
 };
 
 &adm_dma {
-	status = "ok";
+	status = "okay";
 };
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
index faec8b35ae..471e02c5f1 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
@@ -136,9 +136,9 @@
 
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 			serial@16340000 {
-				status = "ok";
+				status = "okay";
 			};
 			/*
 			 * The i2c device on gsbi4 should not be enabled.
@@ -149,52 +149,52 @@
 		};
 
 		sata-phy@1b400000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@29000000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@0 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&usb0_pwr_en_pins>;
 			pinctrl-names = "default";
 		};
 
 		usb30@1 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&usb1_pwr_en_pins>;
 			pinctrl-names = "default";
 		};
 
 		pcie0: pci@1b500000 {
-			status = "ok";
+			status = "okay";
 			reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 			pinctrl-0 = <&pcie0_pins>;
 			pinctrl-names = "default";
 		};
 
 		pcie1: pci@1b700000 {
-			status = "ok";
+			status = "okay";
 			reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 			pinctrl-0 = <&pcie1_pins>;
 			pinctrl-names = "default";
@@ -202,7 +202,7 @@
 		};
 
 		nand@1ac00000 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&nand_pins>;
 			pinctrl-names = "default";
@@ -296,7 +296,7 @@
 		};
 
 		gmac1: ethernet@37200000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			qcom,id = <1>;
 
@@ -312,7 +312,7 @@
 		};
 
 		gmac2: ethernet@37400000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <2>;
 
@@ -403,5 +403,5 @@
 };
 
 &adm_dma {
-	status = "ok";
+	status = "okay";
 };
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
index 2c224016b6..2510ca1081 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
@@ -111,9 +111,9 @@
 
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 			serial@16340000 {
-				status = "ok";
+				status = "okay";
 			};
 			/*
 			 * The i2c device on gsbi4 should not be enabled.
@@ -125,10 +125,10 @@
 
 		gsbi5: gsbi@1a200000 {
 			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
+			status = "okay";
 
 			spi4: spi@1a280000 {
-				status = "ok";
+				status = "okay";
 
 				pinctrl-0 = <&spi_pins>;
 				pinctrl-names = "default";
@@ -234,35 +234,35 @@
 		};
 
 		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@0 {
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@1 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie0: pci@1b500000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie1: pci@1b700000 {
-			status = "ok";
+			status = "okay";
 			force_gen1 = <1>;
 		};
 
@@ -293,7 +293,7 @@
 		};
 
 		gmac1: ethernet@37200000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			qcom,id = <1>;
 
@@ -310,7 +310,7 @@
 		};
 
 		gmac2: ethernet@37400000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <2>;
 
@@ -413,5 +413,5 @@
 };
 
 &adm_dma {
-	status = "ok";
+	status = "okay";
 };
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
index 7b5ee799ee..2f511e498e 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
@@ -240,7 +240,7 @@
 };
 
 &gmac2 {
-	status = "ok";
+	status = "okay";
 
 	phy-mode = "sgmii";
 	qcom,id = <2>;
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
index 7cd1c7b567..e1fa475310 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
@@ -151,9 +151,9 @@
 
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 			serial@16340000 {
-				status = "ok";
+				status = "okay";
 			};
 			/*
 			 * The i2c device on gsbi4 should not be enabled.
@@ -165,10 +165,10 @@
 
 		gsbi5: gsbi@1a200000 {
 			qcom,mode = <GSBI_PROT_SPI>;
-			status = "ok";
+			status = "okay";
 
 			spi4: spi@1a280000 {
-				status = "ok";
+				status = "okay";
 
 				pinctrl-0 = <&spi_pins>;
 				pinctrl-names = "default";
@@ -190,44 +190,44 @@
 		};
 
 		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@0 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&usb0_pwr_en_pins>;
 			pinctrl-names = "default";
 		};
 
 		usb30@1 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&usb1_pwr_en_pins>;
 			pinctrl-names = "default";
 		};
 
 		pcie0: pci@1b500000 {
-			status = "ok";
+			status = "okay";
 			reset-gpio = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
 			pinctrl-0 = <&pcie0_pins>;
 			pinctrl-names = "default";
 		};
 
 		pcie1: pci@1b700000 {
-			status = "ok";
+			status = "okay";
 			reset-gpio = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
 			pinctrl-0 = <&pcie1_pins>;
 			pinctrl-names = "default";
@@ -279,7 +279,7 @@
 		};
 
 		gmac1: ethernet@37200000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			qcom,id = <1>;
 			qcom,phy_mdio_addr = <4>;
@@ -300,7 +300,7 @@
 		};
 
 		gmac2: ethernet@37400000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <2>;
 			qcom,phy_mdio_addr = <0>;	/* none */
@@ -382,5 +382,5 @@
 };
 
 &adm_dma {
-	status = "ok";
+	status = "okay";
 };
diff --git a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
index 447c0da696..304f948296 100644
--- a/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
+++ b/target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
@@ -204,9 +204,9 @@
 
 		gsbi@16300000 {
 			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "ok";
+			status = "okay";
 			serial@16340000 {
-				status = "ok";
+				status = "okay";
 			};
 			/*
 			 * The i2c device on gsbi4 should not be enabled.
@@ -217,55 +217,55 @@
 		};
 
 		sata-phy@1b400000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		sata@29000000 {
 			ports-implemented = <0x1>;
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8800 {		/* USB3 port 1 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@100f8830 {		/* USB3 port 1 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8800 {		/* USB3 port 0 HS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		phy@110f8830 {		/* USB3 port 0 SS phy */
-			status = "ok";
+			status = "okay";
 		};
 
 		usb30@0 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&usb0_pwr_en_pins>;
 			pinctrl-names = "default";
 		};
 
 		usb30@1 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&usb1_pwr_en_pins>;
 			pinctrl-names = "default";
 		};
 
 		pcie0: pci@1b500000 {
-			status = "ok";
+			status = "okay";
 		};
 
 		pcie1: pci@1b700000 {
-			status = "ok";
+			status = "okay";
 			force_gen1 = <1>;
 		};
 
 		nand@1ac00000 {
-			status = "ok";
+			status = "okay";
 
 			pinctrl-0 = <&nand_pins>;
 			pinctrl-names = "default";
@@ -382,7 +382,7 @@
 		};
 
 		gmac1: ethernet@37200000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "rgmii";
 			qcom,id = <1>;
 			qcom,phy_mdio_addr = <4>;
@@ -405,7 +405,7 @@
 		};
 
 		gmac2: ethernet@37400000 {
-			status = "ok";
+			status = "okay";
 			phy-mode = "sgmii";
 			qcom,id = <2>;
 			qcom,phy_mdio_addr = <0>;	/* none */
@@ -509,5 +509,5 @@
 };
 
 &adm_dma {
-	status = "ok";
+	status = "okay";
 };