aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2016-04-01 07:11:27 +0000
committerJohn Crispin <john@openwrt.org>2016-04-01 07:11:27 +0000
commit3da1ef38c1925b9183bc5c3ca68ccd6d6df326bb (patch)
tree383a003c86b88a22c533b951f5a7ea9123f36efb /target
parentc8dd53e591801cb403cc4b916b474e39d65f2214 (diff)
downloadupstream-3da1ef38c1925b9183bc5c3ca68ccd6d6df326bb.tar.gz
upstream-3da1ef38c1925b9183bc5c3ca68ccd6d6df326bb.tar.bz2
upstream-3da1ef38c1925b9183bc5c3ca68ccd6d6df326bb.zip
ar71xx: WNR2200: fix for random WLAN MAC
Fix for invalid/random/duplicate WLAN MAC address in WNR2200. Permanent platform MAC is calculated and assigned during system startup. WLAN MAC follows wired Ethernet interface addresses. Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl> SVN-Revision: 49100
Diffstat (limited to 'target')
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c39
1 files changed, 37 insertions, 2 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c
index 5d23f21763..37ffc4c56b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2200.c
@@ -12,6 +12,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/kernel.h> /* for max() macro */
#include <asm/mach-ath79/ath79.h>
@@ -45,6 +46,7 @@
#define WNR2200_MAC0_OFFSET 0
#define WNR2200_MAC1_OFFSET 6
#define WNR2200_PCIE_CALDATA_OFFSET 0x1000
+#define WNR2200_WMAC_OFFSET 0x108c /* wireless MAC is inside ART */
static struct gpio_led wnr2200_leds_gpio[] __initdata = {
{
@@ -102,9 +104,40 @@ static struct gpio_led wnr2200_leds_gpio[] __initdata = {
}
};
+/*
+ * For WNR2200 ART flash area used for WLAN MAC is usually empty (0xff)
+ * so ath9k driver uses random MAC instead each time module is loaded.
+ * OpenWrt's original fix was to copy eth1 address to WLAN interface.
+ * New solution does not duplicate hardware addresses and is taken from
+ * WNR2000v3 code. It assigns permanent WLAN MAC equal to ethN's MAC
+ * plus 1, so network interfaces get sequential addresses.
+ * If ART wireless MAC address field has been filled by user, use it.
+ */
+static void __init wnr2200_get_wmac(u8 *wmac_gen_addr, int mac0_art_offset,
+ int mac1_art_offset, int wmac_art_offset)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 *eth0_mac_addr = (u8 *) (art + mac0_art_offset);
+ u8 *eth1_mac_addr = (u8 *) (art + mac1_art_offset);
+ u8 *wlan_mac_addr = (u8 *) (art + wmac_art_offset);
+
+ /* only 0xff if all bits are set - address is invalid, empty area */
+ if ((wlan_mac_addr[0] & wlan_mac_addr[1] & wlan_mac_addr[2] &
+ wlan_mac_addr[3] & wlan_mac_addr[4] & wlan_mac_addr[5]) == 0xff) {
+ memcpy(wmac_gen_addr, eth0_mac_addr, 5);
+ wmac_gen_addr[5] = max(eth0_mac_addr[5], eth1_mac_addr[5]) + 1;
+
+ /* Avoid potential conflict in case max(0xff,0x00)+1==0x00 */
+ if (!wmac_gen_addr[5])
+ wmac_gen_addr[5] = 1;
+ } else
+ memcpy(wmac_gen_addr, wlan_mac_addr, 6);
+}
+
static void __init wnr2200_setup(void)
{
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 wlan_mac_addr[6];
ath79_register_mdio(0, 0x0);
@@ -121,8 +154,10 @@ static void __init wnr2200_setup(void)
ath79_register_eth(1);
ath79_register_m25p80(NULL);
- ap91_pci_init(art + WNR2200_PCIE_CALDATA_OFFSET,
- art + WNR2200_MAC1_OFFSET);
+
+ wnr2200_get_wmac(wlan_mac_addr, WNR2200_MAC0_OFFSET,
+ WNR2200_MAC1_OFFSET, WNR2200_WMAC_OFFSET);
+ ap91_pci_init(art + WNR2200_PCIE_CALDATA_OFFSET, wlan_mac_addr);
ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr2200_leds_gpio),
wnr2200_leds_gpio);