diff options
author | David Bauer <mail@david-bauer.net> | 2020-05-19 22:49:35 +0200 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2020-05-22 21:54:30 +0200 |
commit | ebddc5f984a240980303aed68524eb615484eef8 (patch) | |
tree | f8eacc7f4ea3b557fa3163119e9c5bedcbdcf795 /target | |
parent | a9f75101508f64306710590bf45a326d4c2a1970 (diff) | |
download | upstream-ebddc5f984a240980303aed68524eb615484eef8.tar.gz upstream-ebddc5f984a240980303aed68524eb615484eef8.tar.bz2 upstream-ebddc5f984a240980303aed68524eb615484eef8.zip |
ath79: add support for Enterasys WS-AP3705i
Hardware
--------
SoC: Atheros AR9344
RAM: 128M DDR2
FLASH: 2x Macronix MX25L12845EM
2x 16MiB SPI-NOR
WLAN2: Atheros AR9344 2x2 2T2R
WLAN5: Atheros AR9580 2x2 2T2R
SERIAL: Cisco-RJ45 on the back (115200 8n1)
Installation
------------
The U-Boot CLI is password protected (using the same credentials as the
OS). Default is admin/new2day.
1. Download the OpenWrt initramfs-image. Place it into a TFTP server
root directory and rename it to 1401A8C0.img. Configure the TFTP
server to listen at 192.168.1.66/24.
2. Connect the TFTP server to the access point.
3. Connect to the serial console of the access point. Attach power and
interrupt the boot procedure when prompted (bootdelay is 1 second).
4. Configure the U-Boot environment for booting OpenWrt from Ram and
flash:
$ setenv boot_openwrt 'setenv bootargs; bootm 0xbf230000'
$ setenv ramboot_openwrt 'setenv serverip 192.168.1.66;
tftpboot 0x85000000; bootm'
$ setenv bootcmd 'run boot_openwrt'
$ saveenv
5. Load OpenWrt into memory:
$ run ramboot_openwrt
Wait for the image to boot.
6. Transfer the OpenWrt sysupgrade image to the device. Write the image
to flash using sysupgrade:
$ sysupgrade -n /path/to/openwrt-sysuograde.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target')
6 files changed, 261 insertions, 1 deletions
diff --git a/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts b/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts new file mode 100644 index 0000000000..0f02881471 --- /dev/null +++ b/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +#include "ar9344.dtsi" + +/ { + compatible = "enterasys,ws-ap3705i", "qca,ar9344"; + model = "Enterasys WS-AP3705i"; + + chosen { + bootargs = "console=ttyS0,115200n8"; + }; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_red; + label-mac-device = ð0; + }; + + mtd-concat { + compatible = "mtd-concat"; + devices = <&concat0 &concat1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x0 0x1dd0000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&enable_gpio_11 &enable_gpio_16>; + + led_power_green: power_green { + label = "ws-ap3705i:green:power"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + led_power_red: power_red { + label = "ws-ap3705i:red:power"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + lan_blue { + label = "ws-ap3705i:blue:lan"; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + + lan_green { + label = "ws-ap3705i:green:lan"; + gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + }; + + radio2 { + label = "ws-ap3705i:green:radio2"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; + + ath9k-leds { + compatible = "gpio-leds"; + + radio1 { + label = "ws-ap3705i:green:radio1"; + gpios = <&ath9k 0 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1tpt"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&ref { + clock-frequency = <40000000>; +}; + +&uart { + status = "okay"; +}; + +&pinmux { + enable_gpio_16: pinmux_enable_gpio_16 { + pinctrl-single,bits = <0x10 0x0 0x000000ff>; + }; + + enable_gpio_11: pinmux_enable_gpio_11 { + pinctrl-single,bits = <0x8 0x0 0xff000000>; + }; +}; + +&gpio { + status = "okay"; +}; + +&wmac { + status = "okay"; + qca,no-eeprom; +}; + +&spi { + status = "okay"; + + cs-gpios = <0>, <0>; + num-cs = <2>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot-bak"; + reg = <0x0 0x80000>; + read-only; + }; + + partition@80000 { + label = "u-boot-env0"; + reg = <0x80000 0x10000>; + read-only; + }; + + partition@90000 { + label = "u-boot-env1"; + reg = <0x90000 0x10000>; + read-only; + }; + + partition@a0000 { + label = "u-boot"; + reg = <0xa0000 0x80000>; + read-only; + }; + + partition@120000 { + label = "calibrate"; + reg = <0x120000 0x10000>; + read-only; + }; + + partition@130000 { + label = "nvram"; + reg = <0x130000 0x100000>; + read-only; + }; + + concat0: partition@230000 { + label = "concat0"; + reg = <0x230000 0xdd0000>; + }; + }; + }; + + flash@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + concat1: partition@0 { + label = "concat1"; + reg = <0x0 0x1000000>; + }; + }; + }; +}; + +&pcie { + status = "okay"; + + ath9k: wifi@0,0 { + compatible = "pci168c,0033"; + reg = <0x0000 0 0 0 0>; + qca,no-eeprom; + #gpio-cells = <2>; + gpio-controller; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x1e000000 0x08000101 0x08001313>; + + phy-mode = "rgmii"; + phy-handle = <&phy0>; + + gmac-config { + device = <&gmac>; + rgmii-gmac0 = <1>; + rxd-delay = <0>; + rxdv-delay = <0>; + txen-delay = <0>; + txd-delay = <0>; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index a3c5b3f988..4774d5daf2 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -95,7 +95,8 @@ comfast,cf-ew72) ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1" ;; comfast,cf-wr752ac-v1|\ -engenius,ecb1750) +engenius,ecb1750|\ +enterasys,ws-ap3705i) ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0" ;; devolo,magic-2-wifi) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 0b05868baf..a99d5f6532 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -22,6 +22,7 @@ ath79_setup_interfaces() devolo,dvl1750x|\ dlink,dir-505|\ engenius,ecb1750|\ + enterasys,ws-ap3705i|\ glinet,gl-ar300m-lite|\ netgear,ex6400|\ netgear,ex7300|\ @@ -400,6 +401,9 @@ ath79_setup_macs() ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac" ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac" ;; + enterasys,ws-ap3705i) + label_mac=$(mtd_get_mac_ascii u-boot-env0 ethaddr) + ;; iodata,etg3-r) lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr) wan_mac=$(macaddr_add "$lan_mac" -1) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index 428b502d81..e0fa5ff354 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -43,6 +43,10 @@ case "$FIRMWARE" in caldata_extract "art" 0x1000 0x440 ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr) ;; + enterasys,ws-ap3705i) + caldata_extract "calibrate" 0x1000 0x440 + ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR1) + ;; nec,wg800hp) caldata_extract "art" 0x1000 0x440 ath9k_patch_mac $(mtd_get_mac_text board_data 0x680) @@ -72,6 +76,10 @@ case "$FIRMWARE" in caldata_extract "art" 0x5000 0x440 ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1) ;; + enterasys,ws-ap3705i) + caldata_extract "calibrate" 0x5000 0x440 + ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR0) + ;; ocedo,raccoon|\ tplink,tl-wdr3500-v1|\ tplink,tl-wdr3600-v1|\ diff --git a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh index b3c3de298e..da1583a825 100644 --- a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh +++ b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh @@ -8,6 +8,9 @@ preinit_set_mac_address() { avm,fritz450e) ip link set dev eth0 address $(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)")) ;; + enterasys,ws-ap3705i) + ip link set dev eth0 address $(mtd_get_mac_ascii u-boot-env0 ethaddr) + ;; siemens,ws-ap3610) ip link set dev eth0 address $(mtd_get_mac_ascii cfg1 ethaddr) ;; diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 8d8767ddf6..7f06740c98 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -630,6 +630,14 @@ define Device/engenius_ews511ap endef TARGET_DEVICES += engenius_ews511ap +define Device/enterasys_ws-ap3705i + SOC := ar9344 + DEVICE_VENDOR := Enterasys + DEVICE_MODEL := WS-AP3705i + IMAGE_SIZE := 30528k +endef +TARGET_DEVICES += enterasys_ws-ap3705i + define Device/etactica_eg200 SOC := ar9331 DEVICE_VENDOR := eTactica |