brcm63xx: initial support for Sky SR102 router

The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.

To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
SOC: 	    BCM63168 (BMIPS4350 V8.0 @400MHz)
Flash size: 16 MiB
RAM size:   128 MiB

Heavily based on patch for OpenWRT Chaos Chalmer.
Original patch and more info can be found at:
https://openwrt.org/toh/sky/sr102

Known issues:
 - Wireless and ADSL modem are not working.

Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>

7 files changed, 236 insertions, 0 deletions

diff --git a/target/linux/brcm63xx/base-files/etc/board.d/02_network b/target/linux/brcm63xx/base-files/etc/board.d/02_network
index a7fd6f5d38..a2ca5a37b3 100755
--- a/target/linux/brcm63xx/base-files/etc/board.d/02_network
+++ b/target/linux/brcm63xx/base-files/etc/board.d/02_network
@@ -130,6 +130,12 @@ neufbox6)
 		"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9t@eth0"
 	;;
 
+sr102)
+	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+	ucidef_add_switch "switch0" \
+		"0:lan" "1:lan" "2:lan" "3:wan" "8t@eth0"
+	;;
+
 vg50)
 	ucidef_add_switch "switch0" \
 		"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8t@eth0"
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
index acb1795214..afb347818f 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -132,6 +132,10 @@ set_state() {
 	rta770w)
 		status_led="RTA770W:green:diag"
 		;;
+	sr102)
+		status_led="SR102:white:power"
+		status_led2="SR102:red:power"
+		;;
 	spw500v)
 		status_led="SPW500V:green:power"
 		;;
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 82abd737ce..1676ae0abb 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -237,6 +237,9 @@ brcm63xx_dt_detect() {
 	"SFR neufbox 6 (Sercomm)")
 		board_name="neufbox6"
 		;;
+	"SKY SR102")
+		board_name="sr102"
+		;;
 	"T-Com Speedport W303 V")
 		board_name="spw303v"
 		;;
diff --git a/target/linux/brcm63xx/dts/sr102.dts b/target/linux/brcm63xx/dts/sr102.dts
new file mode 100644
index 0000000000..4d8cbd3435
--- /dev/null
+++ b/target/linux/brcm63xx/dts/sr102.dts
@@ -0,0 +1,120 @@
+/dts-v1/;
+
+#include "bcm63268.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "SKY SR102";
+	compatible = "sky,sr102", "brcm,bcm63268";
+
+	chosen {
+		bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <20>;
+		debounce-interval = <60>;
+
+		wps {
+			label = "wps";
+			gpios = <&pinctrl 33 0>;
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		lan1_green {
+			label = "SR102:green:lan1";
+			gpios = <&pinctrl 1 1>;
+		};
+		power_red {
+			label = "SR102:red:power";
+			gpios = <&pinctrl 2 1>;
+		};
+		wifi_red {
+			label = "SR102:red:wifi";
+			gpios = <&pinctrl 3 1>;
+		};
+		inet_red {
+			label = "SR102:red:inet";
+			gpios = <&pinctrl 4 1>;
+		};
+		inet_white {
+			label = "SR102:white:inet";
+			gpios = <&pinctrl 5 0>;
+		};
+		power_white {
+			label = "SR102:white:power";
+			gpios = <&pinctrl 6 0>;
+			default-state = "on";
+		};
+		wifi_white {
+			label = "SR102:white:wifi";
+			gpios = <&pinctrl 8 0>;
+		};
+		lan2_red {
+			label = "SR102:red:lan2";
+			gpios = <&pinctrl 9 1>;
+		};
+		lan3_red {
+			label = "SR102:red:lan3";
+			gpios = <&pinctrl 10 1>;
+		};
+		lan4_red {
+			label = "SR102:red:lan4";
+			gpios = <&pinctrl 11 1>;
+		};
+		lan1_red {
+			label = "SR102:red:lan1";
+			gpios = <&pinctrl 12 1>;
+		};
+		lan2_green {
+			label = "SR102:green:lan2";
+			gpios = <&pinctrl 13 0>;
+		};
+		lan3_green {
+			label = "SR102:green:lan3";
+			gpios = <&pinctrl 14 1>;
+		};
+		lan4_green {
+			label = "SR102:green:lan4";
+			gpios = <&pinctrl 15 1>;
+		};
+		hd_white {
+			label = "SR102:white:hd";
+			gpios = <&pinctrl 18 0>;
+		};
+	};
+};
+
+&hsspi {
+	status = "ok";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <16666667>;
+		spi-tx-bus-width = <2>;
+		spi-rx-bus-width = <2>;
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		linux,part-probe = "bcm63xxpart";
+
+		partitions {
+			compatible = "brcm,bcm963xx-cfe-nor-partitions";
+		};
+	};
+};
+
+&uart0 {
+	status = "ok";
+};
diff --git a/target/linux/brcm63xx/image/bcm63xx.mk b/target/linux/brcm63xx/image/bcm63xx.mk
index b9ecd54064..6a2a9bfb4a 100644
--- a/target/linux/brcm63xx/image/bcm63xx.mk
+++ b/target/linux/brcm63xx/image/bcm63xx.mk
@@ -1020,6 +1020,18 @@ define Device/NEUFBOX6
 endef
 TARGET_DEVICES += NEUFBOX6
 
+define Device/SR102
+  $(Device/bcm63xx)
+  DEVICE_TITLE := SKY-SR102
+  DEVICE_DTS := sr102
+  CFE_BOARD_ID := BSKYB_63168
+  CFE_CHIP_ID := 63268
+  CFE_EXTRAS += --rsa-signature "$(VERSION_DIST)-$(firstword $(subst -,$(space),$(REVISION)))"
+  DEVICE_PACKAGES := \
+    $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += SR102
+
 ### T-Com ###
 define Device/SPW303V
   $(Device/bcm63xx)
diff --git a/target/linux/brcm63xx/patches-4.9/598-board_sr102.patch b/target/linux/brcm63xx/patches-4.9/598-board_sr102.patch
new file mode 100644
index 0000000000..1a9578ead1
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.9/598-board_sr102.patch
@@ -0,0 +1,75 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2457,6 +2457,56 @@
+ 		},
+ 	},
+ };
++
++static struct board_info __initdata board_BSKYB_63168 = {
++	.name				= "BSKYB_63168",
++	.expected_cpu_id		= 0x63268,
++
++	.has_pci			= 1,
++	.use_fallback_sprom		= 0,
++
++	.has_ehci0			= 1,
++	.has_ohci0			= 1,
++	.num_usbh_ports			= 2,
++
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id	= 1,
++				.name	= "Port 1",
++			},
++
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "Port 2",
++			},
++
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "Port 3",
++			},
++
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "Port 4",
++			},
++
++		},
++	},
++/*
++	.fallback_sprom = {
++		.type				= SPROM_BCM435F,
++		.pci_bus			= 0,
++		.pci_dev			= 0,
++	},
++*/
++};
+ #endif /* CONFIG_BCM63XX_CPU_63268 */
+ 
+ /*
+@@ -2557,6 +2609,7 @@
+ 	&board_963268bu_p300,
+ 	&board_963269bhr,
+ 	&board_vw6339gu,
++	&board_BSKYB_63168,
+ #endif
+ };
+ 
+@@ -2661,6 +2714,7 @@
+ 	{ .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, },
+ 	{ .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
+ 	{ .compatible = "inteno,vg50", .data = &board_vw6339gu, },
++	{ .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
+ #endif
+ #endif /* CONFIG_OF */
+ 	{ },
diff --git a/target/linux/brcm63xx/profiles/sky.mk b/target/linux/brcm63xx/profiles/sky.mk
new file mode 100644
index 0000000000..f209794800
--- /dev/null
+++ b/target/linux/brcm63xx/profiles/sky.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/SR102
+  NAME:=SKY SR102
+  PACKAGES:=kmod-b43 wpad-mini \
+	kmod-usb2 kmod-usb-ohci
+endef
+define Profile/SR102/Description
+  Package set optimized for SKY SR102.
+endef
+$(eval $(call Profile,SR102))