diff options
| author | Felix Fietkau <nbd@openwrt.org> | 2009-02-22 18:45:39 +0000 |
|---|---|---|
| committer | Felix Fietkau <nbd@openwrt.org> | 2009-02-22 18:45:39 +0000 |
| commit | f5fba5bc3ccf493289396deaa64a7ce7385d8590 (patch) | |
| tree | b02bca862b0f7cc4ae3ae90164ce74718e68ee3e /target | |
| parent | 610e45ae5c6ce47452cee2d7bd13900f7ce4f6d1 (diff) | |
| download | upstream-f5fba5bc3ccf493289396deaa64a7ce7385d8590.tar.gz upstream-f5fba5bc3ccf493289396deaa64a7ce7385d8590.tar.bz2 upstream-f5fba5bc3ccf493289396deaa64a7ce7385d8590.zip | |
Asus WL-330gE Support
Here is support for the compact Asus WL-330gE. It uses that all-in-one
5354 Broadcom chip that's also in the WL-520gU, so I assume USB
support can be soldered on. I've yet to open up the device, though.
Initial flashing is done through the CFE failsafe mode like on other
Asus devices, where you boot holding the reset button, the power LED
flashes, and you tftp an image.
Signed-off-by: David Cooper <dave@kupesoft.com>
SVN-Revision: 14624
Diffstat (limited to 'target')
| -rwxr-xr-x | target/linux/brcm-2.4/base-files/etc/init.d/netconfig | 36 |
1 files changed, 25 insertions, 11 deletions
diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig index 44e2de25c9..a53209e06a 100755 --- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig +++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig @@ -57,6 +57,12 @@ start() { c["wan_ifname"] = "" c["lan_ifname"] = "eth1" } + if (model == "ASUS WL-330gE") { + c["wan_ifname"] = "" + c["lan_ifname"] = "eth0" + c["vlan0ports"] = "" + c["vlan1ports"] = "" + } if (model == "ASUS WL-500g") { c["wan_ifname"] = "eth1" c["lan_ifname"] = "eth0" @@ -149,12 +155,14 @@ start() { c["vlan1ports"] = "" } - print "#### VLAN configuration " - print "config switch eth0" - p("vlan0", "vlan0ports") - p("vlan1", "vlan1ports") - print "" - print "" + if (c["vlan0ports"] || c["vlan1ports"]) { + print "#### VLAN configuration " + print "config switch eth0" + p("vlan0", "vlan0ports") + p("vlan1", "vlan1ports") + print "" + print "" + } print "#### Loopback configuration" print "config interface loopback" print " option ifname \"lo\"" @@ -173,10 +181,16 @@ start() { print " option netmask 255.255.255.0" print "" print "" - print "#### WAN configuration" - print "config interface wan" - p("ifname", "wan_ifname") - p("macaddr", "wan_macaddr") - print " option proto dhcp" + if (c["wan_ifname"]) { + print "#### WAN configuration" + print "config interface wan" + p("ifname", "wan_ifname") + p("macaddr", "wan_macaddr") + print " option proto dhcp" + } else { + print "#### WAN configuration (disabled)" + print "#config interface wan" + print "# option proto dhcp" + } }' > /etc/config/network } |