diff options
| author | Andrew Cameron <apcameron@softhome.net> | 2020-06-18 08:25:43 -0500 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-06-20 13:03:39 +0200 |
| commit | d93da0d0169b2ca90b888e4bb782c259e5ddf2fe (patch) | |
| tree | 854c8f38f87bc75f11366e2908b7395048201e4f /target | |
| parent | 9a477b833ab2aea96b9eee55acb5f9e7b01b36d8 (diff) | |
| download | upstream-d93da0d0169b2ca90b888e4bb782c259e5ddf2fe.tar.gz upstream-d93da0d0169b2ca90b888e4bb782c259e5ddf2fe.tar.bz2 upstream-d93da0d0169b2ca90b888e4bb782c259e5ddf2fe.zip | |
ath79: add support for TP-Link CPE610 v2
TP-Link CPE610 v2 is an outdoor wireless CPE for 5 GHz with
one Ethernet port based on Atheros AR9344
Specifications:
- 560/450/225 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 64 MB of DDR2 RAM
- 8 MB of SPI-NOR Flash
- 23dBi high-gain directional 2×2 MIMO antenna and a
dedicated metal reflector
- Power, LAN, WLAN5G green LEDs
- 3x green RSSI LEDs
Flashing instructions:
Flash factory image through stock firmware WEB UI
or through TFTP
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP adress:192.168.0.254
Signed-off-by: Andrew Cameron <apcameron@softhome.net>
Diffstat (limited to 'target')
4 files changed, 48 insertions, 0 deletions
diff --git a/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts b/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts new file mode 100644 index 0000000000..c00f21a51e --- /dev/null +++ b/target/linux/ath79/dts/ar9344_tplink_cpe610-v2.dts @@ -0,0 +1,34 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "ar9344_tplink_cpe.dtsi" + +/ { + model = "TP-Link CPE610 v2"; + compatible = "tplink,cpe610-v2", "qca,ar9344"; + + aliases { + led-boot = &led_lan; + led-failsafe = &led_lan; + led-upgrade = &led_lan; + }; + + leds { + compatible = "gpio-leds"; + + led_lan: lan { + label = "tp-link:green:lan"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + wlan5g { + label = "tp-link:green:wlan5g"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + }; +}; + +ð1 { + compatible = "syscon", "simple-mfd"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 8029cf7b5e..be0c3b1217 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -243,6 +243,9 @@ tplink,cpe510-v3) ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "tp-link:green:link4" "wlan0" "76" "100" "-75" "13" ;; tplink,cpe610-v1|\ +tplink,cpe610-v2) + ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" + ;; tplink,tl-wr902ac-v1) ucidef_set_led_netdev "lan" "LAN" "tp-link:green:lan" "eth0" ucidef_set_led_netdev "internet" "Internet" "tp-link:green:internet" "eth0" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index f2ba49764b..02245031fa 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -39,6 +39,7 @@ ath79_setup_interfaces() tplink,cpe510-v2|\ tplink,cpe510-v3|\ tplink,cpe610-v1|\ + tplink,cpe610-v2|\ tplink,re350k-v1|\ tplink,re355-v1|\ tplink,re450-v1|\ diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk index bd7eb3fc76..967eb2a7c3 100644 --- a/target/linux/ath79/image/generic-tp-link.mk +++ b/target/linux/ath79/image/generic-tp-link.mk @@ -352,6 +352,16 @@ define Device/tplink_cpe610-v1 endef TARGET_DEVICES += tplink_cpe610-v1 +define Device/tplink_cpe610-v2 + $(Device/tplink-safeloader-okli) + SOC := ar9344 + IMAGE_SIZE := 7680k + DEVICE_MODEL := CPE610 + DEVICE_VARIANT := v2 + TPLINK_BOARD_ID := CPE610V2 +endef +TARGET_DEVICES += tplink_cpe610-v2 + define Device/tplink_re350k-v1 $(Device/tplink-safeloader) SOC := qca9558 |