brcm2708: move wifi calibration EEPROMs out of base-files

Ship EEPROM blobs for specific supported board only and don't have them
lurking around in our source tree but rather download them from
@github/RPi-Distro/firmware-nonfree upstream.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

5 files changed, 3 insertions, 160 deletions

diff --git a/target/linux/brcm2708/Makefile b/target/linux/brcm2708/Makefile
index 8f3107bf1a..3032b9ffd1 100644
--- a/target/linux/brcm2708/Makefile
+++ b/target/linux/brcm2708/Makefile
@@ -27,8 +27,7 @@ DEFAULT_PACKAGES += \
 	kmod-usb-hid \
 	kmod-sound-core kmod-sound-arm-bcm2835 \
 	kmod-fs-vfat kmod-nls-cp437 kmod-nls-iso8859-1 \
-	brcmfmac-firmware-43430-sdio brcmfmac-firmware-43455-sdio \
-	kmod-brcmfmac wpad-mini partx-utils mkf2fs e2fsprogs
+	partx-utils mkf2fs e2fsprogs
 
 KERNELNAME:=Image dtbs
 
diff --git a/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt b/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt
deleted file mode 100644
index ea4f648a18..0000000000
--- a/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-# NVRAM file for BCM943430WLPTH
-# 2.4 GHz, 20 MHz BW mode
-
-# The following parameter values are just placeholders, need to be updated.
-manfid=0x2d0
-prodid=0x0727
-vendid=0x14e4
-devid=0x43e2
-boardtype=0x0727
-boardrev=0x1101
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-sromrev=11
-boardflags=0x00404201
-boardflags3=0x08000000
-xtalfreq=37400
-nocrc=1
-ag0=255
-aa2g=1
-ccode=ALL
-
-pa0itssit=0x20
-extpagain2g=0
-#PA parameters for 2.4GHz, measured at CHIP OUTPUT
-pa2ga0=-168,7161,-820
-AvVmid_c0=0x0,0xc8
-cckpwroffset0=5
-
-# PPR params
-maxp2ga0=84
-txpwrbckof=6
-cckbw202gpo=0
-legofdmbw202gpo=0x66111111
-mcsbw202gpo=0x77711111
-propbw202gpo=0xdd
-
-# OFDM IIR :
-ofdmdigfilttype=18
-ofdmdigfilttypebe=18
-# PAPD mode:
-papdmode=1
-papdvalidtest=1
-pacalidx2g=42
-papdepsoffset=-22
-papdendidx=58
-
-# LTECX flags
-ltecxmux=0
-ltecxpadnum=0x0102
-ltecxfnsel=0x44
-ltecxgcigpio=0x01
-
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-
-deadman_to=0xffffffff
-# muxenab: 0x1 for UART enable, 0x2 for GPIOs, 0x8 for JTAG
-muxenab=0x1
-# CLDO PWM voltage settings - 0x4 - 1.1 volt
-#cldo_pwm=0x4
-
-#VCO freq 326.4MHz
-spurconfig=0x3 
-
-edonthd20l=-75
-edoffthd20ul=-80
diff --git a/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43455-sdio.clm_blob b/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43455-sdio.clm_blob
deleted file mode 100644
index 3b9b5bdc15..0000000000
--- a/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43455-sdio.clm_blob
+++ /dev/null
diff --git a/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43455-sdio.txt b/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43455-sdio.txt
deleted file mode 100644
index 260c9299ca..0000000000
--- a/target/linux/brcm2708/base-files/lib/firmware/brcm/brcmfmac43455-sdio.txt
+++ /dev/null
@@ -1,92 +0,0 @@
-# Cloned from bcm94345wlpagb_p2xx.txt 
-NVRAMRev=$Rev: 498373 $
-sromrev=11
-vendid=0x14e4
-devid=0x43ab
-manfid=0x2d0
-prodid=0x06e4
-#macaddr=00:90:4c:c5:12:38
-macaddr=b8:27:eb:74:f2:6c
-nocrc=1
-boardtype=0x6e4
-boardrev=0x1304
-
-#XTAL 37.4MHz
-xtalfreq=37400
-
-btc_mode=1
-#------------------------------------------------------
-#boardflags: 5GHz eTR switch by default
-#            2.4GHz eTR switch by default
-#            bit1 for btcoex
-boardflags=0x00480201
-boardflags2=0x40800000
-boardflags3=0x48200100
-phycal_tempdelta=15
-rxchain=1
-txchain=1
-aa2g=1
-aa5g=1
-tssipos5g=1
-tssipos2g=1
-femctrl=0
-AvVmid_c0=1,165,2,100,2,100,2,100,2,100
-pa2ga0=-129,6525,-718
-pa2ga1=-149,4408,-601
-pa5ga0=-185,6836,-815,-186,6838,-815,-184,6859,-815,-184,6882,-818
-pa5ga1=-202,4285,-574,-201,4312,-578,-196,4391,-586,-201,4294,-575
-itrsw=1
-pdoffsetcckma0=2
-pdoffset2gperchan=0,-2,1,0,1,0,1,1,1,0,0,-1,-1,0
-pdoffset2g40ma0=16
-pdoffset40ma0=0x8888
-pdoffset80ma0=0x8888
-extpagain5g=2
-extpagain2g=2
-tworangetssi2g=1
-tworangetssi5g=1
-# LTECX flags
-# WCI2
-ltecxmux=0
-ltecxpadnum=0x0504
-ltecxfnsel=0x22
-ltecxgcigpio=0x32
-
-maxp2ga0=80
-ofdmlrbw202gpo=0x0022
-dot11agofdmhrbw202gpo=0x4442
-mcsbw202gpo=0x98444422
-mcsbw402gpo=0x98444422
-maxp5ga0=82,82,82,82
-mcsbw205glpo=0xb9555000
-mcsbw205gmpo=0xb9555000
-mcsbw205ghpo=0xb9555000
-mcsbw405glpo=0xb9555000
-mcsbw405gmpo=0xb9555000
-mcsbw405ghpo=0xb9555000
-mcsbw805glpo=0xb9555000
-mcsbw805gmpo=0xb9555000
-mcsbw805ghpo=0xb9555000
-
-swctrlmap_2g=0x00000000,0x00000000,0x00000000,0x010000,0x3ff
-swctrlmap_5g=0x00100010,0x00200020,0x00200020,0x010000,0x3fe
-swctrlmapext_5g=0x00000000,0x00000000,0x00000000,0x000000,0x3
-swctrlmapext_2g=0x00000000,0x00000000,0x00000000,0x000000,0x3
-
-vcodivmode=1
-deadman_to=481500000
-
-ed_thresh2g=-54
-ed_thresh5g=-54
-eu_edthresh2g=-54
-eu_edthresh5g=-54
-ldo1=4
-rawtempsense=0x1ff
-cckPwrIdxCorr=3
-cckTssiDelay=150
-ofdmTssiDelay=150
-txpwr2gAdcScale=1
-txpwr5gAdcScale=1
-dot11b_opts=0x3aa85
-cbfilttype=1
-fdsslevel_ch11=6
diff --git a/target/linux/brcm2708/image/Makefile b/target/linux/brcm2708/image/Makefile
index 326ef5a0ee..69c1d83fbf 100644
--- a/target/linux/brcm2708/image/Makefile
+++ b/target/linux/brcm2708/image/Makefile
@@ -66,6 +66,7 @@ define Device/rpi-2
   DEVICE_TITLE := Raspberry Pi 2B/3B/3B+/3CM
   DEVICE_DTS := bcm2709-rpi-2-b bcm2710-rpi-3-b bcm2710-rpi-3-b-plus bcm2710-rpi-cm3
   SUPPORTED_DEVICES := rpi-2-b rpi-3-b rpi-3-b-plus rpi-cm raspberrypi,2-model-b raspberrypi,3-model-b raspberrypi,3-model-b-plus raspberrypi,compute-module-3
+  DEVICE_PACKAGES := brcmfmac-firmware-43430-sdio brcmfmac-firmware-43455-sdio brcmfmac-board-rpi2 brcmfmac-board-rpi3 kmod-brcmfmac wpad-mini
 endef
 ifeq ($(SUBTARGET),bcm2709)
   TARGET_DEVICES += rpi-2
@@ -76,6 +77,7 @@ define Device/rpi-3
   DEVICE_TITLE := Raspberry Pi 3B/3B+
   DEVICE_DTS := broadcom/bcm2710-rpi-3-b broadcom/bcm2710-rpi-3-b-plus
   SUPPORTED_DEVICES := rpi-3-b rpi-3-b-plus raspberrypi,3-model-b raspberrypi,3-model-b-plus
+  DEVICE_PACKAGES := brcmfmac-firmware-43455-sdio brcmfmac-board-rpi3 kmod-brcmfmac wpad-mini
 endef
 ifeq ($(SUBTARGET),bcm2710)
   TARGET_DEVICES += rpi-3