aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2020-05-19 22:49:35 +0200
committerDavid Bauer <mail@david-bauer.net>2020-05-22 21:54:30 +0200
commitebddc5f984a240980303aed68524eb615484eef8 (patch)
treef8eacc7f4ea3b557fa3163119e9c5bedcbdcf795 /target
parenta9f75101508f64306710590bf45a326d4c2a1970 (diff)
downloadupstream-ebddc5f984a240980303aed68524eb615484eef8.tar.gz
upstream-ebddc5f984a240980303aed68524eb615484eef8.tar.bz2
upstream-ebddc5f984a240980303aed68524eb615484eef8.zip
ath79: add support for Enterasys WS-AP3705i
Hardware -------- SoC: Atheros AR9344 RAM: 128M DDR2 FLASH: 2x Macronix MX25L12845EM 2x 16MiB SPI-NOR WLAN2: Atheros AR9344 2x2 2T2R WLAN5: Atheros AR9580 2x2 2T2R SERIAL: Cisco-RJ45 on the back (115200 8n1) Installation ------------ The U-Boot CLI is password protected (using the same credentials as the OS). Default is admin/new2day. 1. Download the OpenWrt initramfs-image. Place it into a TFTP server root directory and rename it to 1401A8C0.img. Configure the TFTP server to listen at 192.168.1.66/24. 2. Connect the TFTP server to the access point. 3. Connect to the serial console of the access point. Attach power and interrupt the boot procedure when prompted (bootdelay is 1 second). 4. Configure the U-Boot environment for booting OpenWrt from Ram and flash: $ setenv boot_openwrt 'setenv bootargs; bootm 0xbf230000' $ setenv ramboot_openwrt 'setenv serverip 192.168.1.66; tftpboot 0x85000000; bootm' $ setenv bootcmd 'run boot_openwrt' $ saveenv 5. Load OpenWrt into memory: $ run ramboot_openwrt Wait for the image to boot. 6. Transfer the OpenWrt sysupgrade image to the device. Write the image to flash using sysupgrade: $ sysupgrade -n /path/to/openwrt-sysuograde.bin Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target')
-rw-r--r--target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts236
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom8
-rw-r--r--target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh3
-rw-r--r--target/linux/ath79/image/generic.mk8
6 files changed, 261 insertions, 1 deletions
diff --git a/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts b/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts
new file mode 100644
index 0000000000..0f02881471
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_enterasys_ws-ap3705i.dts
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar9344.dtsi"
+
+/ {
+ compatible = "enterasys,ws-ap3705i", "qca,ar9344";
+ model = "Enterasys WS-AP3705i";
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ label-mac-device = &eth0;
+ };
+
+ mtd-concat {
+ compatible = "mtd-concat";
+ devices = <&concat0 &concat1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x0 0x1dd0000>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&enable_gpio_11 &enable_gpio_16>;
+
+ led_power_green: power_green {
+ label = "ws-ap3705i:green:power";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_red: power_red {
+ label = "ws-ap3705i:red:power";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan_blue {
+ label = "ws-ap3705i:blue:lan";
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
+ };
+
+ lan_green {
+ label = "ws-ap3705i:green:lan";
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
+ };
+
+ radio2 {
+ label = "ws-ap3705i:green:radio2";
+ gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+
+ ath9k-leds {
+ compatible = "gpio-leds";
+
+ radio1 {
+ label = "ws-ap3705i:green:radio1";
+ gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&ref {
+ clock-frequency = <40000000>;
+};
+
+&uart {
+ status = "okay";
+};
+
+&pinmux {
+ enable_gpio_16: pinmux_enable_gpio_16 {
+ pinctrl-single,bits = <0x10 0x0 0x000000ff>;
+ };
+
+ enable_gpio_11: pinmux_enable_gpio_11 {
+ pinctrl-single,bits = <0x8 0x0 0xff000000>;
+ };
+};
+
+&gpio {
+ status = "okay";
+};
+
+&wmac {
+ status = "okay";
+ qca,no-eeprom;
+};
+
+&spi {
+ status = "okay";
+
+ cs-gpios = <0>, <0>;
+ num-cs = <2>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot-bak";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "u-boot-env0";
+ reg = <0x80000 0x10000>;
+ read-only;
+ };
+
+ partition@90000 {
+ label = "u-boot-env1";
+ reg = <0x90000 0x10000>;
+ read-only;
+ };
+
+ partition@a0000 {
+ label = "u-boot";
+ reg = <0xa0000 0x80000>;
+ read-only;
+ };
+
+ partition@120000 {
+ label = "calibrate";
+ reg = <0x120000 0x10000>;
+ read-only;
+ };
+
+ partition@130000 {
+ label = "nvram";
+ reg = <0x130000 0x100000>;
+ read-only;
+ };
+
+ concat0: partition@230000 {
+ label = "concat0";
+ reg = <0x230000 0xdd0000>;
+ };
+ };
+ };
+
+ flash@1 {
+ compatible = "jedec,spi-nor";
+ reg = <1>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ concat1: partition@0 {
+ label = "concat1";
+ reg = <0x0 0x1000000>;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+
+ ath9k: wifi@0,0 {
+ compatible = "pci168c,0033";
+ reg = <0x0000 0 0 0 0>;
+ qca,no-eeprom;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ pll-data = <0x1e000000 0x08000101 0x08001313>;
+
+ phy-mode = "rgmii";
+ phy-handle = <&phy0>;
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-gmac0 = <1>;
+ rxd-delay = <0>;
+ rxdv-delay = <0>;
+ txen-delay = <0>;
+ txd-delay = <0>;
+ };
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index a3c5b3f988..4774d5daf2 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -95,7 +95,8 @@ comfast,cf-ew72)
ucidef_set_led_netdev "wan" "WAN" "$boardname:blue:wan" "eth1"
;;
comfast,cf-wr752ac-v1|\
-engenius,ecb1750)
+engenius,ecb1750|\
+enterasys,ws-ap3705i)
ucidef_set_led_netdev "lan" "LAN" "$boardname:blue:lan" "eth0"
;;
devolo,magic-2-wifi)
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 0b05868baf..a99d5f6532 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -22,6 +22,7 @@ ath79_setup_interfaces()
devolo,dvl1750x|\
dlink,dir-505|\
engenius,ecb1750|\
+ enterasys,ws-ap3705i|\
glinet,gl-ar300m-lite|\
netgear,ex6400|\
netgear,ex7300|\
@@ -400,6 +401,9 @@ ath79_setup_macs()
ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
;;
+ enterasys,ws-ap3705i)
+ label_mac=$(mtd_get_mac_ascii u-boot-env0 ethaddr)
+ ;;
iodata,etg3-r)
lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
wan_mac=$(macaddr_add "$lan_mac" -1)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 428b502d81..e0fa5ff354 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -43,6 +43,10 @@ case "$FIRMWARE" in
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env ethaddr)
;;
+ enterasys,ws-ap3705i)
+ caldata_extract "calibrate" 0x1000 0x440
+ ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR1)
+ ;;
nec,wg800hp)
caldata_extract "art" 0x1000 0x440
ath9k_patch_mac $(mtd_get_mac_text board_data 0x680)
@@ -72,6 +76,10 @@ case "$FIRMWARE" in
caldata_extract "art" 0x5000 0x440
ath9k_patch_mac $(macaddr_add $(mtd_get_mac_text "mac" 0x18) 1)
;;
+ enterasys,ws-ap3705i)
+ caldata_extract "calibrate" 0x5000 0x440
+ ath9k_patch_mac $(mtd_get_mac_ascii u-boot-env0 RADIOADDR0)
+ ;;
ocedo,raccoon|\
tplink,tl-wdr3500-v1|\
tplink,tl-wdr3600-v1|\
diff --git a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh
index b3c3de298e..da1583a825 100644
--- a/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh
+++ b/target/linux/ath79/generic/base-files/lib/preinit/10_fix_eth_mac.sh
@@ -8,6 +8,9 @@ preinit_set_mac_address() {
avm,fritz450e)
ip link set dev eth0 address $(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
;;
+ enterasys,ws-ap3705i)
+ ip link set dev eth0 address $(mtd_get_mac_ascii u-boot-env0 ethaddr)
+ ;;
siemens,ws-ap3610)
ip link set dev eth0 address $(mtd_get_mac_ascii cfg1 ethaddr)
;;
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 8d8767ddf6..7f06740c98 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -630,6 +630,14 @@ define Device/engenius_ews511ap
endef
TARGET_DEVICES += engenius_ews511ap
+define Device/enterasys_ws-ap3705i
+ SOC := ar9344
+ DEVICE_VENDOR := Enterasys
+ DEVICE_MODEL := WS-AP3705i
+ IMAGE_SIZE := 30528k
+endef
+TARGET_DEVICES += enterasys_ws-ap3705i
+
define Device/etactica_eg200
SOC := ar9331
DEVICE_VENDOR := eTactica