kernel: update 4.4 to 4.4.86

Refresh patches

Compile & run tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>

3 files changed, 19 insertions, 19 deletions

diff --git a/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch b/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
index bafa4e4b1d..244a4a6586 100644
--- a/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
+++ b/target/linux/bcm53xx/patches-4.4/710-b53-add-hacky-CPU-port-fixes-for-devices-not-using-p.patch
@@ -21,7 +21,7 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  
  #include "b53_regs.h"
  #include "b53_priv.h"
-@@ -1522,6 +1523,28 @@ static int b53_switch_init(struct b53_de
+@@ -1578,6 +1579,28 @@ static int b53_switch_init(struct b53_de
  			return ret;
  	}
  
diff --git a/target/linux/brcm63xx/patches-4.4/802-rtl8367r_fix_RGMII_support.patch b/target/linux/brcm63xx/patches-4.4/802-rtl8367r_fix_RGMII_support.patch
index 9037d8954a..2aca2f3f74 100644
--- a/target/linux/brcm63xx/patches-4.4/802-rtl8367r_fix_RGMII_support.patch
+++ b/target/linux/brcm63xx/patches-4.4/802-rtl8367r_fix_RGMII_support.patch
@@ -20,7 +20,7 @@ Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
  #define RTL8367_DI_FORCE_REG(_x)		(0x1310 + (_x))
  #define   RTL8367_DI_FORCE_MODE			BIT(12)
  #define   RTL8367_DI_FORCE_NWAY			BIT(7)
-@@ -894,6 +898,7 @@ static int rtl8367_extif_set_mode(struct
+@@ -897,6 +901,7 @@ static int rtl8367_extif_set_mode(struct
  	case RTL8367_EXTIF_MODE_RGMII_33V:
  		REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
  		REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
diff --git a/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch b/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch
index fe0c059371..72e13dcf8b 100644
--- a/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch
+++ b/target/linux/generic/pending-4.4/002-phy_drivers_backport.patch
@@ -1,6 +1,6 @@
 --- a/drivers/net/phy/adm6996.c
 +++ b/drivers/net/phy/adm6996.c
-@@ -286,7 +286,7 @@ static u16
+@@ -289,7 +289,7 @@ static u16
  adm6996_read_mii_reg(struct adm6996_priv *priv, enum admreg reg)
  {
  	struct phy_device *phydev = priv->priv;
@@ -9,7 +9,7 @@
  
  	return bus->read(bus, PHYADDR(reg));
  }
-@@ -295,7 +295,7 @@ static void
+@@ -298,7 +298,7 @@ static void
  adm6996_write_mii_reg(struct adm6996_priv *priv, enum admreg reg, u16 val)
  {
  	struct phy_device *phydev = priv->priv;
@@ -18,7 +18,7 @@
  
  	bus->write(bus, PHYADDR(reg), val);
  }
-@@ -1018,13 +1018,13 @@ static int adm6996_config_init(struct ph
+@@ -1050,13 +1050,13 @@ static int adm6996_config_init(struct ph
  	pdev->supported = ADVERTISED_100baseT_Full;
  	pdev->advertising = ADVERTISED_100baseT_Full;
  
@@ -35,7 +35,7 @@
  	if (!priv)
  		return -ENOMEM;
  
-@@ -1044,7 +1044,7 @@ static int adm6996_config_init(struct ph
+@@ -1076,7 +1076,7 @@ static int adm6996_config_init(struct ph
  }
  
  /*
@@ -44,7 +44,7 @@
   */
  static int adm6996_read_status(struct phy_device *phydev)
  {
-@@ -1060,7 +1060,7 @@ static int adm6996_read_status(struct ph
+@@ -1092,7 +1092,7 @@ static int adm6996_read_status(struct ph
  }
  
  /*
@@ -53,7 +53,7 @@
   */
  static int adm6996_config_aneg(struct phy_device *phydev)
  {
-@@ -1069,11 +1069,11 @@ static int adm6996_config_aneg(struct ph
+@@ -1101,11 +1101,11 @@ static int adm6996_config_aneg(struct ph
  
  static int adm6996_fixup(struct phy_device *dev)
  {
@@ -67,7 +67,7 @@
  		return 0;
  
  	/* look for the switch on the bus */
-@@ -1120,6 +1120,7 @@ static struct phy_driver adm6996_phy_dri
+@@ -1152,6 +1152,7 @@ static struct phy_driver adm6996_phy_dri
  	.config_aneg	= &adm6996_config_aneg,
  	.read_status	= &adm6996_read_status,
  	.soft_reset	= adm6996_soft_reset,
@@ -75,7 +75,7 @@
  };
  
  static int adm6996_gpio_probe(struct platform_device *pdev)
-@@ -1188,7 +1189,7 @@ static int __init adm6996_init(void)
+@@ -1220,7 +1221,7 @@ static int __init adm6996_init(void)
  	int err;
  
  	phy_register_fixup_for_id(PHY_ANY_ID, adm6996_fixup);
@@ -86,7 +86,7 @@
  
 --- a/drivers/net/phy/ar8216.c
 +++ b/drivers/net/phy/ar8216.c
-@@ -177,7 +177,7 @@ ar8xxx_phy_check_aneg(struct phy_device
+@@ -183,7 +183,7 @@ ar8xxx_phy_check_aneg(struct phy_device
  	if (ret & BMCR_ANENABLE)
  		return 0;
  
@@ -95,7 +95,7 @@
  	ret |= BMCR_ANENABLE | BMCR_ANRESTART;
  	return phy_write(phydev, MII_BMCR, ret);
  }
-@@ -1997,7 +1997,7 @@ ar8xxx_phy_config_init(struct phy_device
+@@ -2054,7 +2054,7 @@ ar8xxx_phy_config_init(struct phy_device
  
  	priv->phy = phydev;
  
@@ -104,7 +104,7 @@
  		if (chip_is_ar8316(priv)) {
  			/* switch device has been initialized, reinit */
  			priv->dev.ports = (AR8216_NUM_PORTS - 1);
-@@ -2045,7 +2045,7 @@ ar8xxx_check_link_states(struct ar8xxx_p
+@@ -2102,7 +2102,7 @@ ar8xxx_check_link_states(struct ar8xxx_p
  		/* flush ARL entries for this port if it went down*/
  		if (!link_new)
  			priv->chip->atu_flush_port(priv, i);
@@ -113,7 +113,7 @@
  			 i, link_new ? "up" : "down");
  	}
  
-@@ -2064,10 +2064,10 @@ ar8xxx_phy_read_status(struct phy_device
+@@ -2121,10 +2121,10 @@ ar8xxx_phy_read_status(struct phy_device
  	if (phydev->state == PHY_CHANGELINK)
  		ar8xxx_check_link_states(priv);
  
@@ -126,7 +126,7 @@
  	phydev->link = !!link.link;
  	if (!phydev->link)
  		return 0;
-@@ -2097,7 +2097,7 @@ ar8xxx_phy_read_status(struct phy_device
+@@ -2154,7 +2154,7 @@ ar8xxx_phy_read_status(struct phy_device
  static int
  ar8xxx_phy_config_aneg(struct phy_device *phydev)
  {
@@ -135,7 +135,7 @@
  		return 0;
  
  	return genphy_config_aneg(phydev);
-@@ -2152,15 +2152,15 @@ ar8xxx_phy_probe(struct phy_device *phyd
+@@ -2209,15 +2209,15 @@ ar8xxx_phy_probe(struct phy_device *phyd
  	int ret;
  
  	/* skip PHYs at unused adresses */
@@ -154,7 +154,7 @@
  			goto found;
  
  	priv = ar8xxx_create();
-@@ -2169,7 +2169,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
+@@ -2226,7 +2226,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
  		goto unlock;
  	}
  
@@ -163,7 +163,7 @@
  
  	ret = ar8xxx_probe_switch(priv);
  	if (ret)
-@@ -2190,7 +2190,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
+@@ -2247,7 +2247,7 @@ ar8xxx_phy_probe(struct phy_device *phyd
  found:
  	priv->use_count++;
  
@@ -172,7 +172,7 @@
  		if (ar8xxx_has_gige(priv)) {
  			phydev->supported = SUPPORTED_1000baseT_Full;
  			phydev->advertising = ADVERTISED_1000baseT_Full;
-@@ -2278,21 +2278,33 @@ ar8xxx_phy_soft_reset(struct phy_device
+@@ -2335,21 +2335,33 @@ ar8xxx_phy_soft_reset(struct phy_device
  	return 0;
  }