aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorAndrew Cameron <apcameron@softhome.net>2019-11-06 20:12:55 -0600
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-11-22 11:41:24 +0100
commit5b8709d9f251c8ce1a0c8e1444ab0be4b4a4de21 (patch)
tree5a29e503a0cd6d0c40e1ef63435a382a5be11aa0 /target
parentd3a8a62692b06b3e5fe7077a2ce641fbf09cdc19 (diff)
downloadupstream-5b8709d9f251c8ce1a0c8e1444ab0be4b4a4de21.tar.gz
upstream-5b8709d9f251c8ce1a0c8e1444ab0be4b4a4de21.tar.bz2
upstream-5b8709d9f251c8ce1a0c8e1444ab0be4b4a4de21.zip
ath79: add support for the TP-LINK WBS510 V2
This adds support for a popular low-cost 5GHz N based AP Specifications: - SoC: Atheros AR9344 - RAM: 64MB - Storage: 8 MB SPI NOR - Wireless: 5GHz 300 Mbps, 2x RP-SMA connector, 27 dBm TX power - Ethernet: 1x 10/100 Mbps with 24V POE IN, 1x 10/100 Mbps Installation: Flash factory image through stock firmware WEB UI or through TFTP To get to TFTP recovery just hold reset button while powering on for around 4-5 seconds and release. Rename factory image to recovery.bin Stock TFTP server IP:192.168.0.100 Stock device TFTP adress:192.168.0.254 Signed-off-by: Andrew Cameron <apcameron@softhome.net>
Diffstat (limited to 'target')
-rw-r--r--target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts13
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network1
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches3
-rw-r--r--target/linux/ath79/image/generic-tp-link.mk11
5 files changed, 29 insertions, 2 deletions
diff --git a/target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts b/target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts
new file mode 100644
index 0000000000..5c55d78904
--- /dev/null
+++ b/target/linux/ath79/dts/ar9344_tplink_wbs510-v2.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "ar9344_tplink_cpexxx-v1.dtsi"
+
+/ {
+ compatible = "tplink,wbs510-v2", "qca,ar9344";
+ model = "TP-Link WBS510 v2";
+};
+
+&led_link4 {
+ gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
index d54e770240..5bb1d92a60 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds
@@ -175,7 +175,8 @@ tplink,cpe210-v1|\
tplink,cpe220-v2|\
tplink,cpe220-v3|\
tplink,cpe510-v1|\
-tplink,wbs210-v2)
+tplink,wbs210-v2|\
+tplink,wbs510-v2)
ucidef_set_led_netdev "lan0" "LAN0" "tp-link:green:lan0" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10"
ucidef_set_rssimon "wlan0" "200000" "1"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 07f3c4e83c..dcc0b8be23 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -92,6 +92,7 @@ ath79_setup_interfaces()
tplink,cpe220-v3|\
tplink,cpe510-v1|\
tplink,wbs210-v2|\
+ tplink,wbs510-v2|\
ubnt,nanostation-m|\
ubnt,routerstation)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
index 9bce6cc51b..844b212152 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
+++ b/target/linux/ath79/generic/base-files/etc/board.d/03_gpio_switches
@@ -46,7 +46,8 @@ tplink,cpe210-v1|\
tplink,cpe220-v2|\
tplink,cpe220-v3|\
tplink,cpe510-v1|\
-tplink,wbs210-v2)
+tplink,wbs210-v2|\
+tplink,wbs510-v2)
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
;;
ubnt,nanostation-ac)
diff --git a/target/linux/ath79/image/generic-tp-link.mk b/target/linux/ath79/image/generic-tp-link.mk
index 114c20d3d5..6efed954e4 100644
--- a/target/linux/ath79/image/generic-tp-link.mk
+++ b/target/linux/ath79/image/generic-tp-link.mk
@@ -548,3 +548,14 @@ define Device/tplink_wbs210-v2
TPLINK_BOARD_ID := WBS210V2
endef
TARGET_DEVICES += tplink_wbs210-v2
+
+define Device/tplink_wbs510-v2
+ $(Device/tplink-loader-okli)
+ ATH_SOC := ar9344
+ IMAGE_SIZE := 7680k
+ DEVICE_MODEL := WBS510
+ DEVICE_VARIANT := v2
+ DEVICE_PACKAGES := rssileds
+ TPLINK_BOARD_ID := WBS510V2
+endef
+TARGET_DEVICES += tplink_wbs510-v2