aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2020-03-21 14:05:53 +0100
committerChristian Lamparter <chunkeey@gmail.com>2020-03-21 17:50:43 +0100
commitea2d284082b5fdea1c398d846dbc83b3fd2d398d (patch)
treec75f1853828b52514d26dfe9de2b182df93d37b0 /target
parent711bd33cd18c60e4e9305e75629636a2de40ace8 (diff)
downloadupstream-ea2d284082b5fdea1c398d846dbc83b3fd2d398d.tar.gz
upstream-ea2d284082b5fdea1c398d846dbc83b3fd2d398d.tar.bz2
upstream-ea2d284082b5fdea1c398d846dbc83b3fd2d398d.zip
gemini: Add v5.4 kernel patches
This adds the kernel patches needed for the Gemini. Just 7 patches, 5 of them are already upstream. Notably we incorperate the temperature sensor on the hard drive to drive temperature control of the NAS chassis. This is required for the DIR-685 which has no external temperature sensor. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [use the drivetemp package over the backport] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'target')
-rw-r--r--target/linux/gemini/patches-5.4/0001-usb-host-fotg2-add-Gemini-specific-handling.patch131
-rw-r--r--target/linux/gemini/patches-5.4/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch37
-rw-r--r--target/linux/gemini/patches-5.4/0003-ARM-dts-gemini-Rename-IDE-nodes.patch117
-rw-r--r--target/linux/gemini/patches-5.4/0004-ARM-dts-gemini-Add-thermal-zone-to-DIR-685.patch101
4 files changed, 386 insertions, 0 deletions
diff --git a/target/linux/gemini/patches-5.4/0001-usb-host-fotg2-add-Gemini-specific-handling.patch b/target/linux/gemini/patches-5.4/0001-usb-host-fotg2-add-Gemini-specific-handling.patch
new file mode 100644
index 0000000000..4a6a804ca4
--- /dev/null
+++ b/target/linux/gemini/patches-5.4/0001-usb-host-fotg2-add-Gemini-specific-handling.patch
@@ -0,0 +1,131 @@
+From 3aaff88a0f5e154aa5a489d59fd4015a2a937c23 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Fri, 21 Apr 2017 22:19:00 +0200
+Subject: [PATCH 1/7] usb: host: fotg2: add Gemini-specific handling
+
+The Cortina Systems Gemini has bolted on a PHY inside the
+silicon that can be handled by six bits in a MISC register in
+the system controller.
+
+If we are running on Gemini, look up a syscon regmap through
+a phandle and enable VBUS and optionally the Mini-B connector.
+
+If the device is flagged as "wakeup-source" using the standard
+DT bindings, we also enable this in the global controller for
+respective port.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ drivers/usb/host/Kconfig | 1 +
+ drivers/usb/host/fotg210-hcd.c | 76 ++++++++++++++++++++++++++++++++++
+ 2 files changed, 77 insertions(+)
+
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -363,6 +363,7 @@ config USB_ISP1362_HCD
+ config USB_FOTG210_HCD
+ tristate "FOTG210 HCD support"
+ depends on USB && HAS_DMA && HAS_IOMEM
++ select MFD_SYSCON
+ ---help---
+ Faraday FOTG210 is an OTG controller which can be configured as
+ an USB2.0 host. It is designed to meet USB2.0 EHCI specification
+--- a/drivers/usb/host/fotg210-hcd.c
++++ b/drivers/usb/host/fotg210-hcd.c
+@@ -33,6 +33,10 @@
+ #include <linux/platform_device.h>
+ #include <linux/io.h>
+ #include <linux/clk.h>
++#include <linux/bitops.h>
++/* For Cortina Gemini */
++#include <linux/mfd/syscon.h>
++#include <linux/regmap.h>
+
+ #include <asm/byteorder.h>
+ #include <asm/irq.h>
+@@ -5558,6 +5562,72 @@ static void fotg210_init(struct fotg210_
+ iowrite32(value, &fotg210->regs->otgcsr);
+ }
+
++/*
++ * Gemini-specific initialization function, only executed on the
++ * Gemini SoC using the global misc control register.
++ */
++#define GEMINI_GLOBAL_MISC_CTRL 0x30
++#define GEMINI_MISC_USB0_WAKEUP BIT(14)
++#define GEMINI_MISC_USB1_WAKEUP BIT(15)
++#define GEMINI_MISC_USB0_VBUS_ON BIT(22)
++#define GEMINI_MISC_USB1_VBUS_ON BIT(23)
++#define GEMINI_MISC_USB0_MINI_B BIT(29)
++#define GEMINI_MISC_USB1_MINI_B BIT(30)
++
++static int fotg210_gemini_init(struct device *dev, struct usb_hcd *hcd)
++{
++ struct device_node *np = dev->of_node;
++ struct regmap *map;
++ bool mini_b;
++ bool wakeup;
++ u32 mask, val;
++ int ret;
++
++ map = syscon_regmap_lookup_by_phandle(np, "syscon");
++ if (IS_ERR(map)) {
++ dev_err(dev, "no syscon\n");
++ return PTR_ERR(map);
++ }
++ mini_b = of_property_read_bool(np, "cortina,gemini-mini-b");
++ wakeup = of_property_read_bool(np, "wakeup-source");
++
++ /*
++ * Figure out if this is USB0 or USB1 by simply checking the
++ * physical base address.
++ */
++ mask = 0;
++ if (hcd->rsrc_start == 0x69000000) {
++ val = GEMINI_MISC_USB1_VBUS_ON;
++ if (mini_b)
++ val |= GEMINI_MISC_USB1_MINI_B;
++ else
++ mask |= GEMINI_MISC_USB1_MINI_B;
++ if (wakeup)
++ val |= GEMINI_MISC_USB1_WAKEUP;
++ else
++ mask |= GEMINI_MISC_USB1_WAKEUP;
++ } else {
++ val = GEMINI_MISC_USB0_VBUS_ON;
++ if (mini_b)
++ val |= GEMINI_MISC_USB0_MINI_B;
++ else
++ mask |= GEMINI_MISC_USB0_MINI_B;
++ if (wakeup)
++ val |= GEMINI_MISC_USB0_WAKEUP;
++ else
++ mask |= GEMINI_MISC_USB0_WAKEUP;
++ }
++
++ ret = regmap_update_bits(map, GEMINI_GLOBAL_MISC_CTRL, mask, val);
++ if (ret) {
++ dev_err(dev, "failed to initialize Gemini PHY\n");
++ return ret;
++ }
++
++ dev_info(dev, "initialized Gemini PHY\n");
++ return 0;
++}
++
+ /**
+ * fotg210_hcd_probe - initialize faraday FOTG210 HCDs
+ *
+@@ -5635,6 +5705,12 @@ static int fotg210_hcd_probe(struct plat
+
+ fotg210_init(fotg210);
+
++ if (of_device_is_compatible(dev->of_node, "cortina,gemini-usb")) {
++ retval = fotg210_gemini_init(dev, hcd);
++ if (retval)
++ goto failed_dis_clk;
++ }
++
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (retval) {
+ dev_err(dev, "failed to add hcd with err %d\n", retval);
diff --git a/target/linux/gemini/patches-5.4/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch b/target/linux/gemini/patches-5.4/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch
new file mode 100644
index 0000000000..39dfd3d535
--- /dev/null
+++ b/target/linux/gemini/patches-5.4/0002-ARM-dts-Augment-DIR-685-partition-table-for-OpenWrt.patch
@@ -0,0 +1,37 @@
+From a2de8560885469f3d76c80207a669029e4fc8a45 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Mon, 11 Mar 2019 15:44:29 +0100
+Subject: [PATCH 2/7] ARM: dts: Augment DIR-685 partition table for OpenWrt
+
+Rename the firmware partition so that the firmware MTD
+splitter will do its job, drop the rootfs arguments as
+the MTD splitter will set this up automatically.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ arch/arm/boot/dts/gemini-dlink-dir-685.dts | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
++++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+@@ -20,7 +20,7 @@
+ };
+
+ chosen {
+- bootargs = "console=ttyS0,19200n8 root=/dev/sda1 rw rootwait consoleblank=300";
++ bootargs = "console=ttyS0,19200n8 consoleblank=300";
+ stdout-path = "uart0:19200n8";
+ };
+
+@@ -285,9 +285,9 @@
+ * this is called "upgrade" on the vendor system.
+ */
+ partition@40000 {
+- label = "upgrade";
++ compatible = "wrg";
++ label = "firmware";
+ reg = <0x00040000 0x01f40000>;
+- read-only;
+ };
+ /* RGDB, Residental Gateway Database? */
+ partition@1f80000 {
diff --git a/target/linux/gemini/patches-5.4/0003-ARM-dts-gemini-Rename-IDE-nodes.patch b/target/linux/gemini/patches-5.4/0003-ARM-dts-gemini-Rename-IDE-nodes.patch
new file mode 100644
index 0000000000..6477b2d2a4
--- /dev/null
+++ b/target/linux/gemini/patches-5.4/0003-ARM-dts-gemini-Rename-IDE-nodes.patch
@@ -0,0 +1,117 @@
+From 9b95b301b219df19c20f4a563f1da6338b09b0d0 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Tue, 31 Dec 2019 18:14:28 +0100
+Subject: [PATCH 3/7] ARM: dts: gemini: Rename IDE nodes
+
+By renaming the ATA drive nodes to "ide@" we activate the
+semantic checks to the DT schema for the controller and use
+the correct notation for PATA drives.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ arch/arm/boot/dts/gemini-dlink-dir-685.dts | 2 +-
+ arch/arm/boot/dts/gemini-dlink-dns-313.dts | 2 +-
+ arch/arm/boot/dts/gemini-nas4220b.dts | 4 ++--
+ arch/arm/boot/dts/gemini-sl93512r.dts | 4 ++--
+ arch/arm/boot/dts/gemini-sq201.dts | 2 +-
+ arch/arm/boot/dts/gemini.dtsi | 8 ++++++--
+ 6 files changed, 13 insertions(+), 9 deletions(-)
+
+--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
++++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+@@ -443,7 +443,7 @@
+ };
+ };
+
+- ata@63000000 {
++ ide@63000000 {
+ status = "okay";
+ };
+
+--- a/arch/arm/boot/dts/gemini-dlink-dns-313.dts
++++ b/arch/arm/boot/dts/gemini-dlink-dns-313.dts
+@@ -297,7 +297,7 @@
+ };
+ };
+
+- ata@63000000 {
++ ide@63000000 {
+ status = "okay";
+ };
+ };
+--- a/arch/arm/boot/dts/gemini-nas4220b.dts
++++ b/arch/arm/boot/dts/gemini-nas4220b.dts
+@@ -170,11 +170,11 @@
+ };
+ };
+
+- ata@63000000 {
++ ide@63000000 {
+ status = "okay";
+ };
+
+- ata@63400000 {
++ ide@63400000 {
+ status = "okay";
+ };
+
+--- a/arch/arm/boot/dts/gemini-sl93512r.dts
++++ b/arch/arm/boot/dts/gemini-sl93512r.dts
+@@ -293,11 +293,11 @@
+ };
+ };
+
+- ata@63000000 {
++ ide@63000000 {
+ status = "okay";
+ };
+
+- ata@63400000 {
++ ide@63400000 {
+ status = "okay";
+ };
+
+--- a/arch/arm/boot/dts/gemini-sq201.dts
++++ b/arch/arm/boot/dts/gemini-sq201.dts
+@@ -289,7 +289,7 @@
+ };
+ };
+
+- ata@63000000 {
++ ide@63000000 {
+ status = "okay";
+ };
+
+--- a/arch/arm/boot/dts/gemini.dtsi
++++ b/arch/arm/boot/dts/gemini.dtsi
+@@ -356,7 +356,7 @@
+ };
+ };
+
+- ata@63000000 {
++ ide@63000000 {
+ compatible = "cortina,gemini-pata", "faraday,ftide010";
+ reg = <0x63000000 0x1000>;
+ interrupts = <4 IRQ_TYPE_EDGE_RISING>;
+@@ -365,9 +365,11 @@
+ clock-names = "PCLK";
+ sata = <&sata>;
+ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
+ };
+
+- ata@63400000 {
++ ide@63400000 {
+ compatible = "cortina,gemini-pata", "faraday,ftide010";
+ reg = <0x63400000 0x1000>;
+ interrupts = <5 IRQ_TYPE_EDGE_RISING>;
+@@ -376,6 +378,8 @@
+ clock-names = "PCLK";
+ sata = <&sata>;
+ status = "disabled";
++ #address-cells = <1>;
++ #size-cells = <0>;
+ };
+
+ dma-controller@67000000 {
diff --git a/target/linux/gemini/patches-5.4/0004-ARM-dts-gemini-Add-thermal-zone-to-DIR-685.patch b/target/linux/gemini/patches-5.4/0004-ARM-dts-gemini-Add-thermal-zone-to-DIR-685.patch
new file mode 100644
index 0000000000..5949b92be1
--- /dev/null
+++ b/target/linux/gemini/patches-5.4/0004-ARM-dts-gemini-Add-thermal-zone-to-DIR-685.patch
@@ -0,0 +1,101 @@
+From 2b2e9d0e1ee4765b21c648235489028c6dc7e336 Mon Sep 17 00:00:00 2001
+From: Linus Walleij <linus.walleij@linaro.org>
+Date: Tue, 31 Dec 2019 18:18:08 +0100
+Subject: [PATCH 4/7] ARM: dts: gemini: Add thermal zone to DIR-685
+
+The DIR-685 can now exploit the thermal zone added by the
+drive temperature sensor inside the hard drive. We have
+patched the libata subsystem to assign the device nodes
+properly to the SCSI devices and this is what the drivetemp
+driver will use to populate the sensor and the thermal
+zone, so pick that up into the thermal zone and let this
+control the fan.
+
+The hardware lacks an embedded temperature sensor so the
+D-Link vendor firmware uses this method to control the
+temperature of the NAS enclosure using the thermal sensor
+inside the hard drive.
+
+The drive temperature trigger points to be used comes from
+the vendor firmware.
+
+Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
+---
+ arch/arm/boot/dts/gemini-dlink-dir-685.dts | 48 ++++++++++++++++++++--
+ 1 file changed, 45 insertions(+), 3 deletions(-)
+
+--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
++++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+@@ -119,13 +119,11 @@
+
+ /*
+ * This is a Sunon Maglev GM0502PFV2-8 cooling fan @10000 RPM.
+- * Since the platform has no temperature sensor, this is controlled
+- * from userspace by using the hard disks S.M.A.R.T. temperature
+ * sensor. It is turned on when the temperature exceeds 46 degrees
+ * and turned off when the temperatures goes below 41 degrees
+ * (celsius).
+ */
+- gpio-fan {
++ fan0: gpio-fan {
+ compatible = "gpio-fan";
+ /* Collides with IDE */
+ gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+@@ -133,6 +131,40 @@
+ #cooling-cells = <2>;
+ };
+
++ thermal-zones {
++ chassis-thermal {
++ /* Poll every 20 seconds */
++ polling-delay = <20000>;
++ /* Poll every 2nd second when cooling */
++ polling-delay-passive = <2000>;
++ /* Use the thermal sensor in the hard drive */
++ thermal-sensors = <&drive0>;
++
++ /* Tripping points from the fan.script in the rootfs */
++ trips {
++ alert: chassis-alert {
++ /* At 43 degrees turn on the fan */
++ temperature = <43000>;
++ hysteresis = <3000>;
++ type = "active";
++ };
++ crit: chassis-crit {
++ /* Just shut down at 60 degrees */
++ temperature = <60000>;
++ hysteresis = <2000>;
++ type = "critical";
++ };
++ };
++
++ cooling-maps {
++ map0 {
++ trip = <&alert>;
++ cooling-device = <&fan0 1 1>;
++ };
++ };
++ };
++ };
++
+ /*
+ * The touchpad input is connected to a GPIO bit-banged
+ * I2C bus.
+@@ -445,6 +477,16 @@
+
+ ide@63000000 {
+ status = "okay";
++
++ /*
++ * This drive may have a temperature sensor with a
++ * thermal zone we can use for thermal control of the
++ * chassis temperature using the fan.
++ */
++ drive0: ide-port@0 {
++ reg = <0>;
++ #thermal-sensor-cells = <0>;
++ };
+ };
+
+ display-controller@6a000000 {