diff options
author | Sven Eckelmann <sven@narfation.org> | 2020-11-23 13:41:34 +0100 |
---|---|---|
committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2021-01-19 21:41:26 +0100 |
commit | ae7680dc4bf914d640dba32c8f1c36631768a56a (patch) | |
tree | 6a4a2471d34ed625061fca2f6f5234748c6dcba6 /target | |
parent | 847cda16eba23d4436a01b7313a21426b9c606fb (diff) | |
download | upstream-ae7680dc4bf914d640dba32c8f1c36631768a56a.tar.gz upstream-ae7680dc4bf914d640dba32c8f1c36631768a56a.tar.bz2 upstream-ae7680dc4bf914d640dba32c8f1c36631768a56a.zip |
ath79: Add support for OpenMesh MR1750 v1
Device specifications:
======================
* Qualcomm/Atheros QCA9558 ver 1 rev 0
* 720/600/240 MHz (CPU/DDR/AHB)
* 128 MB of RAM
* 16 MB of SPI NOR flash
- 2x 7 MB available; but one of the 7 MB regions is the recovery image
* 3T3R 2.4 GHz Wi-Fi (11n)
* 3T3R 5 GHz Wi-Fi (11ac)
* 6x GPIO-LEDs (2x wifi, 2x status, 1x lan, 1x power)
* 1x GPIO-button (reset)
* external h/w watchdog (enabled by default))
* TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX)
* 1x ethernet
- AR8035 ethernet PHY (RGMII)
- 10/100/1000 Mbps Ethernet
- 802.3af POE
- used as LAN interface
* 12-24V 1A DC
* internal antennas
Flashing instructions:
======================
Various methods can be used to install the actual image on the flash.
Two easy ones are:
ap51-flash
----------
The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be
used to transfer the image to the u-boot when the device boots up.
initramfs from TFTP
-------------------
The serial console must be used to access the u-boot shell during bootup.
It can then be used to first boot up the initramfs image from a TFTP server
(here with the IP 192.168.1.21):
setenv serverip 192.168.1.21
setenv ipaddr 192.168.1.1
tftpboot 0c00000 <filename-of-initramfs-kernel>.bin && bootm $fileaddr
The actual sysupgrade image can then be transferred (on the LAN port) to the
device via
scp <filename-of-squashfs-sysupgrade>.bin root@192.168.1.1:/tmp/
On the device, the sysupgrade must then be started using
sysupgrade -n /tmp/<filename-of-squashfs-sysupgrade>.bin
Signed-off-by: Sven Eckelmann <sven@narfation.org>
[rebase, apply shared DTSI/device node, add LED migration]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target')
7 files changed, 37 insertions, 2 deletions
diff --git a/target/linux/ath79/dts/qca9558_openmesh_mr1750-v1.dts b/target/linux/ath79/dts/qca9558_openmesh_mr1750-v1.dts new file mode 100644 index 0000000000..11eb6dfb55 --- /dev/null +++ b/target/linux/ath79/dts/qca9558_openmesh_mr1750-v1.dts @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9558_openmesh_mr.dtsi" + +/ { + compatible = "openmesh,mr1750-v1", "qca,qca9558"; + model = "OpenMesh MR1750 v1"; +}; + +&led_wifi2g { + linux,default-trigger = "phy1tpt"; +}; + +&led_wifi5g { + linux,default-trigger = "phy0tpt"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 8fba9bc0e7..2cdad7dd77 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -159,7 +159,8 @@ comfast,cf-wr752ac-v1|\ engenius,eap300-v2|\ enterasys,ws-ap3705i|\ openmesh,mr900-v1|\ -openmesh,mr900-v2) +openmesh,mr900-v2|\ +openmesh,mr1750-v1) ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0" ;; compex,wpj344-16m|\ diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 76bbd92c21..ef6b70c902 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -50,6 +50,7 @@ ath79_setup_interfaces() openmesh,mr600-v2|\ openmesh,mr900-v1|\ openmesh,mr900-v2|\ + openmesh,mr1750-v1|\ pcs,cap324|\ pisen,ts-d084|\ pisen,wmb001n|\ diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 99d2353ac1..d1a4767648 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -96,6 +96,10 @@ case "$FIRMWARE" in caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(mtd_get_mac_binary art 0xc) ;; + openmesh,mr1750-v1) + caldata_extract "ART" 0x5000 0x844 + ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) + ;; openmesh,om5p-ac-v2) caldata_extract "art" 0x5000 0x844 ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration index 453bf3b911..1d8909f688 100644 --- a/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration +++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/04_led_migration @@ -24,7 +24,8 @@ openmesh,mr600-v2) migrate_leds ":wlan24=:wifi2g" ":wlan58=:wifi5g" ;; openmesh,mr900-v1|\ -openmesh,mr900-v2) +openmesh,mr900-v2|\ +openmesh,mr1750-v1) migrate_leds ":wlan24=:wifi2g" ":wlan58=:wifi5g" ":wan=:lan" ;; pcs,cap324) diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh index 76512758b6..01a9f61943 100644 --- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh +++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh @@ -54,6 +54,7 @@ platform_do_upgrade() { openmesh,mr600-v2|\ openmesh,mr900-v1|\ openmesh,mr900-v2|\ + openmesh,mr1750-v1|\ openmesh,om2p-v2|\ openmesh,om2p-v4|\ openmesh,om2p-hs-v1|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 3d569c9532..92e9458b37 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1590,6 +1590,17 @@ define Device/openmesh_mr900-v2 endef TARGET_DEVICES += openmesh_mr900-v2 +define Device/openmesh_mr1750-v1 + $(Device/openmesh_common_64k) + SOC := qca9558 + DEVICE_MODEL := MR1750 + DEVICE_VARIANT := v1 + DEVICE_PACKAGES += kmod-ath10k-ct ath10k-firmware-qca988x-ct + OPENMESH_CE_TYPE := MR1750 + SUPPORTED_DEVICES += mr1750 +endef +TARGET_DEVICES += openmesh_mr1750-v1 + define Device/openmesh_om2p-v2 $(Device/openmesh_common_256k) SOC := ar9330 |