ramips: improve Skylab SKW92A support

Use the generic board detection instead of the target specific one as
all recent additions are doing.

Add the wireless led according the gpio number from the datasheet.
Rename the board part of the leds to match the name used for the
compatible string. Finally, do not hijack the wps led for boot status
indication longer than necessary.

Merge userspace config into existing cases.

Include the manufacture Name in the dts model string.

Signed-off-by: Mathias Kresin <dev@kresin.me>

6 files changed, 15 insertions, 21 deletions

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 2f83f221f1..6d4bca8029 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -17,6 +17,7 @@ case $board in
 	set_wifi_led "$boardname:amber:wlan"
 	;;
 3g-6200nl|\
+skylab,skw92a|\
 wnce2001)
 	set_wifi_led "$boardname:green:wlan"
 	;;
@@ -287,9 +288,6 @@ rt-n14u)
 	ucidef_set_led_netdev "wan" "wan" "$boardname:blue:wan" eth0.2
 	set_wifi_led "$boardname:blue:air"
 	;;
-skw92a)
-	set_wifi_led "$boardname:green:wlan"
-	;;
 tama,w06)
 	ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
 	ucidef_set_led_wlan "wlan" "WLAN" "$boardname:green:wlan" "phy0tpt"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 862eae1d4a..12d7c86e2b 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -219,6 +219,7 @@ ramips_setup_interfaces()
 	tl-wr840n-v4|\
 	tl-wr840n-v5|\
 	tl-wr841n-v13|\
+	skylab,skw92a|\
 	u7628-01-128M-16M|\
 	ubnt-erx|\
 	ubnt-erx-sfp|\
@@ -345,10 +346,6 @@ ramips_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
 		;;
-	skw92a)
-		ucidef_add_switch "switch0" \
-			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6@eth0"
-		;;
 	tew-638apb-v2)
 		ucidef_add_switch "switch0" \
 			"4:lan" "6@eth0"
@@ -561,7 +558,7 @@ ramips_setup_macs()
 		lan_mac=$(macaddr_setbit_la "$lan_mac")
 		wan_mac=$(mtd_get_mac_binary factory 32772)
 		;;
-	skw92a)
+	skylab,skw92a)
 		lan_mac=$(mtd_get_mac_binary factory 40)
 		wan_mac=$(mtd_get_mac_binary factory 46)
 		;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 28d5073525..ba6a13b65b 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -472,9 +472,6 @@ ramips_board_detect() {
 	*"SAP-G3200U3")
 		name="sap-g3200u3"
 		;;
-	*"SKW92A")
-		name="skw92a"
-		;;
 	*"SL-R7205"*)
 		name="sl-r7205"
 		;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index ecc4650f68..cb6e5c1b5a 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -151,7 +151,7 @@ platform_check_image() {
 	rut5xx|\
 	sap-g3200u3|\
 	sk-wb8|\
-	skw92a|\
+	skylab,skw92a|\
 	sl-r7205|\
 	tama,w06|\
 	tew-638apb-v2|\
diff --git a/target/linux/ramips/dts/SKW92A.dts b/target/linux/ramips/dts/SKW92A.dts
index c43f9e53ea..5aaf3ce161 100644
--- a/target/linux/ramips/dts/SKW92A.dts
+++ b/target/linux/ramips/dts/SKW92A.dts
@@ -8,13 +8,11 @@
 
 /{
 	compatible = "skylab,skw92a", "mediatek,mt7628an-soc";
-	model = "SKW92A";
+	model = "SKYLAB SKW92A";
 
 	aliases {
 		led-boot = &led_power;
 		led-failsafe = &led_power;
-		led-running = &led_power;
-		led-upgrade = &led_power;
 	};
 
 	chosen {
@@ -30,9 +28,14 @@
 		compatible = "gpio-leds";
 
 		led_power: wps {
-			label = "skw92:green:wps";
+			label = "skw92a:green:wps";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 		};
+
+		wlan {
+			label = "skw92a:green:wlan";
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+		};
 	};
 
 	gpio-keys {
@@ -44,14 +47,13 @@
 			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_RESTART>;
 		};
-
 	};
 };
 
 &pinctrl {
 	state_default: pinctrl0 {
 		gpio {
-			ralink,group = "wdt", "refclk", "gpio";
+			ralink,group = "wdt", "refclk", "wled_an";
 			ralink,function = "gpio";
 		};
 	};
@@ -69,7 +71,7 @@
 &spi0 {
 	status = "okay";
 
-	m25p80@0 {
+	flash@0 {
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index 5f40262e84..3174988f49 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -150,13 +150,13 @@ define Device/pbr-d1
 endef
 TARGET_DEVICES += pbr-d1
 
-define Device/skw92a
+define Device/skylab_skw92a
   DTS := SKW92A
   IMAGE_SIZE := 16064k
   DEVICE_TITLE := Skylab SKW92A
   DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci
 endef
-TARGET_DEVICES += skw92a
+TARGET_DEVICES += skylab_skw92a
 
 define Device/tplink_tl-wa801nd-v5
   $(Device/tplink)