lantiq: Switch to the new SPI driver

Compared to the "old" driver:
- Each device must assign a pinctrl setting to the SPI node to allow the
  new SPI driver to configure the SPI pins.
  While here we are also using separate input and output settings so we
  are independent of whether the bootloader configures the pins correctly.
- We use the new "compatible" strings to make the driver choose the
  correct number of chip-selects for each SoC.
- The new driver starts counting the chip-selects at 1 (instead of 0, like
  the old one did). Thus we have to adjust the devices accordingly.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48293

10 files changed, 94 insertions, 35 deletions

diff --git a/target/linux/lantiq/dts/DGN1000B.dts b/target/linux/lantiq/dts/DGN1000B.dts
index a6bd5a8021..68415ca35c 100644
--- a/target/linux/lantiq/dts/DGN1000B.dts
+++ b/target/linux/lantiq/dts/DGN1000B.dts
@@ -28,10 +28,6 @@
 			pinctrl-0 = <&state_default>;
 
 			state_default: pinmux {
-				spi {
-					lantiq,groups = "spi", "spi_cs1";
-					lantiq,function = "spi";
-				};
 				asc {
 					lantiq,groups = "asc";
 					lantiq,function = "asc";
@@ -42,6 +38,18 @@
 					lantiq,open-drain = <1>;
 				};
 			};
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
+					lantiq,function = "spi";
+				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk",
+						"spi_cs1";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
+			};
 		};
 
 		etop@E180000 {
@@ -50,11 +58,14 @@
 		};
 
 		spi@E100800 {
-			m25p80@0 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&pins_spi_default>;
+
+			m25p80@1 {
 				#address-cells = <1>;
 				#size-cells = <1>;
 				compatible = "jedec,spi-nor";
-				reg = <0 0>;
+				reg = <1 0>;
 				spi-max-frequency = <5000000>;
 
 				partition@0 {
diff --git a/target/linux/lantiq/dts/DGN3500.dtsi b/target/linux/lantiq/dts/DGN3500.dtsi
index d43da9df04..48e2471e47 100644
--- a/target/linux/lantiq/dts/DGN3500.dtsi
+++ b/target/linux/lantiq/dts/DGN3500.dtsi
@@ -45,10 +45,18 @@
 					lantiq,output = <1>;
 					lantiq,pull = <0>;
 				};
-				spi {
-					lantiq,groups = "spi", "spi_cs4";
+			};
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
 					lantiq,function = "spi";
 				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk",
+						"spi_cs4";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
 			};
 		};
 
@@ -150,13 +158,16 @@
 };
 
 &spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_spi_default>;
+
 	status = "ok";
 
-	m25p80@3 {
+	m25p80@4 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
-		reg = <3 0>;
+		reg = <4 0>;
 		spi-max-frequency = <1000000>;
 
 		partition@0 {
diff --git a/target/linux/lantiq/dts/EASY80920.dtsi b/target/linux/lantiq/dts/EASY80920.dtsi
index 56efe7150f..ad89ed9515 100644
--- a/target/linux/lantiq/dts/EASY80920.dtsi
+++ b/target/linux/lantiq/dts/EASY80920.dtsi
@@ -53,10 +53,6 @@
 					lantiq,groups = "stp";
 					lantiq,function = "stp";
 				};
-				spi {
-					lantiq,groups = "spi", "spi_cs4";
-					lantiq,function = "spi";
-				};
 				nand {
 					lantiq,groups = "nand cle", "nand ale",
 							"nand rd", "nand rdy";
@@ -90,6 +86,18 @@
 					lantiq,pull = <2>;
 				};
 			};
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
+					lantiq,function = "spi";
+				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk",
+						"spi_cs4";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
+			};
 		};
 
 		eth@E108000 {
@@ -297,13 +305,16 @@
 };
 
 &spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_spi_default>;
+
 	status = "ok";
 
-	m25p80@3 {
+	m25p80@4 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
-		reg = <3 0>;
+		reg = <4 0>;
 		spi-max-frequency = <1000000>;
 
 		partition@0 {
diff --git a/target/linux/lantiq/dts/FRITZ3370.dts b/target/linux/lantiq/dts/FRITZ3370.dts
index c6a593bfed..648e36bcf0 100644
--- a/target/linux/lantiq/dts/FRITZ3370.dts
+++ b/target/linux/lantiq/dts/FRITZ3370.dts
@@ -66,10 +66,6 @@
 			pinctrl-0 = <&state_default>;
 
 			state_default: pinmux {
-				spi {
-					lantiq,groups = "spi", "spi_cs4";
-					lantiq,function = "spi";
-				};
 				mdio {
 					lantiq,groups = "mdio";
 					lantiq,function = "mdio";
@@ -92,6 +88,18 @@
 					lantiq,output = <1>;
 				};
 			};
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
+					lantiq,function = "spi";
+				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk",
+						"spi_cs4";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
+			};
 		};
 
 		eth@E108000 {
@@ -239,13 +247,16 @@
 };
 
 &spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_spi_default>;
+
 	status = "ok";
 
-	m25p80@3 {
+	m25p80@4 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
-		reg = <3 0>;
+		reg = <4 0>;
 		spi-max-frequency = <1000000>;
 
 		ath9k_cal: partition@0 {
diff --git a/target/linux/lantiq/dts/TDW89X0.dtsi b/target/linux/lantiq/dts/TDW89X0.dtsi
index 30225d5cc1..eabb98056f 100644
--- a/target/linux/lantiq/dts/TDW89X0.dtsi
+++ b/target/linux/lantiq/dts/TDW89X0.dtsi
@@ -43,16 +43,24 @@
 					lantiq,open-drain = <0>;
 					lantiq,output = <1>;
 				};
-				spi {
-					lantiq,groups = "spi", "spi_cs4";
-					lantiq,function = "spi";
-				};
 				pcie-rst {
 					lantiq,pins = "io38";
 					lantiq,pull = <0>;
 					lantiq,output = <1>;
 				};
 			};
+			pins_spi_default: pins_spi_default {
+				spi_in {
+					lantiq,groups = "spi_di";
+					lantiq,function = "spi";
+				};
+				spi_out {
+					lantiq,groups = "spi_do", "spi_clk",
+						"spi_cs4";
+					lantiq,function = "spi";
+					lantiq,output = <1>;
+				};
+			};
 		};
 
 		eth@E108000 {
@@ -211,13 +219,16 @@
 };
 
 &spi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pins_spi_default>;
+
 	status = "ok";
 
-	m25p80@3 {
+	m25p80@4 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "jedec,spi-nor";
-		reg = <3 0>;
+		reg = <4 0>;
 		spi-max-frequency = <33250000>;
 		m25p,fast-read;
 
diff --git a/target/linux/lantiq/dts/amazonse.dtsi b/target/linux/lantiq/dts/amazonse.dtsi
index 5389446eba..c0bba436d1 100644
--- a/target/linux/lantiq/dts/amazonse.dtsi
+++ b/target/linux/lantiq/dts/amazonse.dtsi
@@ -73,10 +73,12 @@
 		reg = <0x10000000 0xEF00000>;
 
 		spi@E100800 {
-			compatible = "lantiq,spi-xway";
+			compatible = "lantiq,ase-spi";
 			reg = <0xE100800 0x100>;
 			interrupt-parent = <&icu0>;
 			interrupts = <24 25 26>;
+			interrupt-names = "spi_rx", "spi_tx", "spi_err",
+					"spi_frm";
 			#address-cells = <1>;
 			#size-cells = <1>;
 		};
diff --git a/target/linux/lantiq/dts/ar9.dtsi b/target/linux/lantiq/dts/ar9.dtsi
index 25b834647c..0be95c3711 100644
--- a/target/linux/lantiq/dts/ar9.dtsi
+++ b/target/linux/lantiq/dts/ar9.dtsi
@@ -101,10 +101,12 @@
 		};
 
 		spi: spi@E100800 {
-			compatible = "lantiq,spi-xway";
+			compatible = "lantiq,xrx100-spi";
 			reg = <0xE100800 0x100>;
 			interrupt-parent = <&icu0>;
 			interrupts = <22 23 24>;
+			interrupt-names = "spi_rx", "spi_tx", "spi_err",
+					"spi_frm";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			status = "disabled";
diff --git a/target/linux/lantiq/dts/vr9.dtsi b/target/linux/lantiq/dts/vr9.dtsi
index e38541ef69..fce6f87174 100644
--- a/target/linux/lantiq/dts/vr9.dtsi
+++ b/target/linux/lantiq/dts/vr9.dtsi
@@ -113,10 +113,12 @@
 		};
 
 		spi: spi@E100800 {
-			compatible = "lantiq,spi-xway";
+			compatible = "lantiq,xrx200-spi";
 			reg = <0xE100800 0x100>;
 			interrupt-parent = <&icu0>;
 			interrupts = <22 23 24>;
+			interrupt-names = "spi_rx", "spi_tx", "spi_err",
+					"spi_frm";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			status = "disabled";
diff --git a/target/linux/lantiq/xrx200/config-default b/target/linux/lantiq/xrx200/config-default
index ece2706e5d..1c9f5ccb13 100644
--- a/target/linux/lantiq/xrx200/config-default
+++ b/target/linux/lantiq/xrx200/config-default
@@ -56,9 +56,8 @@ CONFIG_RTL8366S_PHY=y
 CONFIG_RTL8367B_PHY=y
 CONFIG_RTL8367_PHY=y
 CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
+CONFIG_SPI_LANTIQ=y
 CONFIG_SPI_MASTER=y
-CONFIG_SPI_XWAY=y
 CONFIG_SYS_SUPPORTS_MIPS16=y
 CONFIG_UBIFS_FS=y
 CONFIG_UBIFS_FS_ADVANCED_COMPR=y
diff --git a/target/linux/lantiq/xway/config-default b/target/linux/lantiq/xway/config-default
index 974b06b9d5..ae13f80510 100644
--- a/target/linux/lantiq/xway/config-default
+++ b/target/linux/lantiq/xway/config-default
@@ -54,9 +54,8 @@ CONFIG_RTL8366S_PHY=y
 CONFIG_RTL8367B_PHY=y
 CONFIG_RTL8367_PHY=y
 CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
+CONFIG_SPI_LANTIQ=y
 CONFIG_SPI_MASTER=y
-CONFIG_SPI_XWAY=y
 CONFIG_SYS_SUPPORTS_MIPS16=y
 CONFIG_UBIFS_FS=y
 CONFIG_UBIFS_FS_ADVANCED_COMPR=y