generic-2.6: even newer IMQ patch for 2.6.25 and 2.6.26

SVN-Revision: 11501

2 files changed, 686 insertions, 574 deletions

diff --git a/target/linux/generic-2.6/patches-2.6.25/150-netfilter_imq.patch b/target/linux/generic-2.6/patches-2.6.25/150-netfilter_imq.patch
index fbe2d91de7..1524be12ff 100644
--- a/target/linux/generic-2.6/patches-2.6.25/150-netfilter_imq.patch
+++ b/target/linux/generic-2.6/patches-2.6.25/150-netfilter_imq.patch
@@ -1,6 +1,183 @@
+
+
+---
+
+ drivers/net/Kconfig                     |  123 ++++++++
+ drivers/net/Makefile                    |    1 
+ drivers/net/imq.c                       |  474 +++++++++++++++++++++++++++++++
+ include/linux/imq.h                     |    9 +
+ include/linux/netfilter_ipv4/ipt_IMQ.h  |    8 +
+ include/linux/netfilter_ipv6/ip6t_IMQ.h |    8 +
+ include/linux/skbuff.h                  |    8 +
+ net/core/dev.c                          |    9 +
+ net/ipv4/netfilter/Kconfig              |   11 +
+ net/ipv4/netfilter/Makefile             |    1 
+ net/ipv4/netfilter/ipt_IMQ.c            |   69 +++++
+ net/ipv6/netfilter/Kconfig              |    9 +
+ net/ipv6/netfilter/Makefile             |    1 
+ net/ipv6/netfilter/ip6t_IMQ.c           |   69 +++++
+ net/sched/sch_generic.c                 |    1 
+ 15 files changed, 800 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/net/imq.c
+ create mode 100644 include/linux/imq.h
+ create mode 100644 include/linux/netfilter_ipv4/ipt_IMQ.h
+ create mode 100644 include/linux/netfilter_ipv6/ip6t_IMQ.h
+ create mode 100644 net/ipv4/netfilter/ipt_IMQ.c
+ create mode 100644 net/ipv6/netfilter/ip6t_IMQ.c
+
+
+diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
+index 3a0b20a..05c51e7 100644
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -117,6 +117,129 @@ config EQUALIZER
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called eql.  If unsure, say N.
+ 
++config IMQ
++	tristate "IMQ (intermediate queueing device) support"
++	depends on NETDEVICES && NETFILTER
++	---help---
++	  The IMQ device(s) is used as placeholder for QoS queueing
++	  disciplines. Every packet entering/leaving the IP stack can be
++	  directed through the IMQ device where it's enqueued/dequeued to the
++	  attached qdisc. This allows you to treat network devices as classes
++	  and distribute bandwidth among them. Iptables is used to specify
++	  through which IMQ device, if any, packets travel.
++
++	  More information at: http://www.linuximq.net/
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called imq.  If unsure, say N.
++
++choice
++	prompt "IMQ behavior (PRE/POSTROUTING)"
++	depends on IMQ
++	default IMQ_BEHAVIOR_BB
++	help
++
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		IMQ can work in any of the following ways:
++
++		    PREROUTING   |      POSTROUTING
++		-----------------|-------------------
++		#1  After NAT    |      After NAT
++		#2  After NAT    |      Before NAT
++		#3  Before NAT   |      After NAT
++		#4  Before NAT   |      Before NAT
++
++		The default behavior is to hook before NAT on PREROUTING
++		and after NAT on POSTROUTING (#3).
++
++		This settings are specially usefull when trying to use IMQ
++		to shape NATed clients.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++	bool "IMQ AA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++	bool "IMQ AB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++	bool "IMQ BA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++	bool "IMQ BB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++
++	int "Number of IMQ devices"
++	range 2 16
++	depends on IMQ
++	default "16"
++	help
++
++		This settings defines how many IMQ devices will be
++		created.
++
++		The default value is 16.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
+ config TUN
+ 	tristate "Universal TUN/TAP device driver support"
+ 	select CRC32
+diff --git a/drivers/net/Makefile b/drivers/net/Makefile
+index 3b1ea32..17d0575 100644
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -143,6 +143,7 @@ obj-$(CONFIG_SLHC) += slhc.o
+ obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+ 
+ obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_IFB) += ifb.o
+ obj-$(CONFIG_MACVLAN) += macvlan.o
+ obj-$(CONFIG_DE600) += de600.o
+diff --git a/drivers/net/imq.c b/drivers/net/imq.c
+new file mode 100644
+index 0000000..47c31b4
 --- /dev/null
 +++ b/drivers/net/imq.c
-@@ -0,0 +1,464 @@
+@@ -0,0 +1,474 @@
 +/*
 + *             Pseudo-driver for the intermediate queue device.
 + *
@@ -54,6 +231,9 @@
 + *             qdisc_restart() and moved qdisc_run() to tasklet to avoid
 + *             recursive locking. (Jussi Kivilinna)
 + *
++ *             2008/06/14 - New initialization routines to fix 'rmmod' not
++ *             working anymore. Used code from ifb.c (Jussi Kivilinna)
++ *
 + *
 + *             More info at: http://www.linuximq.net/ (Andre Correa)
 + */
@@ -134,10 +314,10 @@
 +#if defined(CONFIG_IMQ_NUM_DEVS)
 +static unsigned int numdevs = CONFIG_IMQ_NUM_DEVS;
 +#else
-+static unsigned int numdevs = 16;
++static unsigned int numdevs = IMQ_MAX_DEVS;
 +#endif
 +
-+static struct net_device *imq_devs;
++static struct net_device *imq_devs_cache[IMQ_MAX_DEVS];
 +
 +static struct net_device_stats *imq_get_stats(struct net_device *dev)
 +{
@@ -183,7 +363,23 @@
 +	if (index > numdevs)
 +		return -1;
 +
-+	dev = imq_devs + index;
++	/* check for imq device by index from cache */
++	dev = imq_devs_cache[index];
++	if (!dev) {
++		char buf[8];
++
++		/* get device by name and cache result */
++		snprintf(buf, sizeof(buf), "imq%d", index);
++		dev = dev_get_by_name(&init_net, buf);
++		if (!dev) {
++			/* not found ?!*/
++			BUG();
++			return -1;
++		}
++
++		imq_devs_cache[index] = dev;
++	}
++
 +	priv = netdev_priv(dev);
 +	if (!(dev->flags & IFF_UP)) {
 +		entry->skb->imq_flags = 0;
@@ -213,11 +409,9 @@
 +			ret = 0;
 +		}
 +	}
-+
-+	spin_unlock_bh(&dev->queue_lock);
-+
 +	if (!test_and_set_bit(1, &priv->tasklet_pending))
 +		tasklet_schedule(&priv->tasklet);
++	spin_unlock_bh(&dev->queue_lock);
 +
 +	if (skb2)
 +		kfree_skb(ret ? entry->skb : skb2);
@@ -237,9 +431,8 @@
 +
 +	spin_lock(&dev->queue_lock);
 +	qdisc_run(dev);
-+	spin_unlock(&dev->queue_lock);
-+
 +	clear_bit(1, &priv->tasklet_pending);
++	spin_unlock(&dev->queue_lock);
 +}
 +
 +static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff *pskb,
@@ -273,6 +466,24 @@
 +	return 0;
 +}
 +
++static void imq_setup(struct net_device *dev)
++{
++	dev->hard_start_xmit    = imq_dev_xmit;
++	dev->open		= imq_open;
++	dev->get_stats		= imq_get_stats;
++	dev->stop		= imq_close;
++	dev->type               = ARPHRD_VOID;
++	dev->mtu                = 16000;
++	dev->tx_queue_len       = 11000;
++	dev->flags              = IFF_NOARP;
++}
++
++static struct rtnl_link_ops imq_link_ops __read_mostly = {
++	.kind		= "imq",
++	.priv_size	= sizeof(struct imq_private),
++	.setup		= imq_setup,
++};
++
 +static int __init imq_init_hooks(void)
 +{
 +	int err;
@@ -321,45 +532,33 @@
 +	return err;
 +}
 +
-+static void __exit imq_unhook(void)
++static int __init imq_init_one(int index)
 +{
-+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-+	nf_unregister_hook(&imq_ingress_ipv6);
-+	nf_unregister_hook(&imq_egress_ipv6);
-+	nf_unregister_queue_handler(PF_INET6, &nfqh);
-+#endif
-+	nf_unregister_hook(&imq_ingress_ipv4);
-+	nf_unregister_hook(&imq_egress_ipv4);
-+	nf_unregister_queue_handler(PF_INET, &nfqh);
-+}
-+
-+static int __init imq_dev_init(struct net_device *dev)
-+{
-+	dev->hard_start_xmit    = imq_dev_xmit;
-+	dev->open		= imq_open;
-+	dev->get_stats		= imq_get_stats;
-+	dev->stop		= imq_close;
-+	dev->type               = ARPHRD_VOID;
-+	dev->mtu                = 16000;
-+	dev->tx_queue_len       = 11000;
-+	dev->flags              = IFF_NOARP;
++	struct net_device *dev;
++	int ret;
 +
-+	dev->priv = kzalloc(sizeof(struct imq_private), GFP_KERNEL);
-+	if (dev->priv == NULL)
++	dev = alloc_netdev(sizeof(struct imq_private), "imq%d", imq_setup);
++	if (!dev)
 +		return -ENOMEM;
 +
-+	return 0;
-+}
++	ret = dev_alloc_name(dev, dev->name);
++	if (ret < 0)
++		goto fail;
 +
-+static void imq_dev_uninit(struct net_device *dev)
-+{
-+	kfree(dev->priv);
++	dev->rtnl_link_ops = &imq_link_ops;
++	ret = register_netdevice(dev);
++	if (ret < 0)
++		goto fail;
++
++	return 0;
++fail:
++	free_netdev(dev);
++	return ret;
 +}
 +
-+static int __init imq_init_devs(struct net *net)
++static int __init imq_init_devs(void)
 +{
-+	struct net_device *dev;
-+	int i, j;
++	int err, i;
 +
 +	if (!numdevs || numdevs > IMQ_MAX_DEVS) {
 +		printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
@@ -367,48 +566,26 @@
 +		return -EINVAL;
 +	}
 +
-+	imq_devs = kzalloc(sizeof(struct net_device) * numdevs, GFP_KERNEL);
-+	if (!imq_devs)
-+		return -ENOMEM;
-+
-+	/* we start counting at zero */
-+	j = numdevs - 1;
++	rtnl_lock();
++	err = __rtnl_link_register(&imq_link_ops);
 +
-+	for (i = 0, dev = imq_devs; i <= j; i++, dev++) {
-+		strcpy(dev->name, "imq%d");
-+		dev->init   = imq_dev_init;
-+		dev->uninit = imq_dev_uninit;
-+		dev->nd_net = net;
++	for (i = 0; i < numdevs && !err; i++)
++		err = imq_init_one(i);
 +
-+		if (register_netdev(dev) < 0)
-+			goto err_register;
++	if (err) {
++		__rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
 +	}
-+	printk(KERN_INFO "IMQ starting with %u devices...\n", numdevs);
-+	return 0;
-+
-+err_register:
-+	for (; i; i--)
-+		unregister_netdev(--dev);
-+	kfree(imq_devs);
-+	return -EIO;
-+}
-+
-+static void imq_cleanup_devs(void)
-+{
-+	int i;
-+	struct net_device *dev = imq_devs;
-+
-+	for (i = 0; i <= numdevs; i++)
-+		unregister_netdev(dev++);
++	rtnl_unlock();
 +
-+	kfree(imq_devs);
++	return err;
 +}
 +
-+static __net_init int imq_init_module(struct net *net)
++static int __init imq_init_module(void)
 +{
 +	int err;
 +
-+	err = imq_init_devs(net);
++	err = imq_init_devs();
 +	if (err) {
 +		printk(KERN_ERR "IMQ: Error trying imq_init_devs(net)\n");
 +		return err;
@@ -417,7 +594,8 @@
 +	err = imq_init_hooks();
 +	if (err) {
 +		printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
-+		imq_cleanup_devs();
++		rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
 +		return err;
 +	}
 +
@@ -437,25 +615,33 @@
 +	return 0;
 +}
 +
-+static __net_exit void imq_exit_module(struct net *net)
++static void __exit imq_unhook(void)
 +{
-+	imq_unhook();
-+	imq_cleanup_devs();
-+	printk(KERN_INFO "IMQ driver unloaded successfully.\n");
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	nf_unregister_hook(&imq_ingress_ipv6);
++	nf_unregister_hook(&imq_egress_ipv6);
++	nf_unregister_queue_handler(PF_INET6, &nfqh);
++#endif
++	nf_unregister_hook(&imq_ingress_ipv4);
++	nf_unregister_hook(&imq_egress_ipv4);
++	nf_unregister_queue_handler(PF_INET, &nfqh);
 +}
 +
-+static struct pernet_operations __net_initdata imq_net_ops = {
-+	.init = imq_init_module,
-+	.exit = imq_exit_module,
-+};
++static void __exit imq_cleanup_devs(void)
++{
++	rtnl_link_unregister(&imq_link_ops);
++	memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++}
 +
-+static int __init imq_init(void)
++static void __exit imq_exit_module(void)
 +{
-+	return register_pernet_device(&imq_net_ops);
++	imq_unhook();
++	imq_cleanup_devs();
++	printk(KERN_INFO "IMQ driver unloaded successfully.\n");
 +}
 +
-+module_init(imq_init);
-+/*module_exit(imq_cleanup_module);*/
++module_init(imq_init_module);
++module_exit(imq_exit_module);
 +
 +module_param(numdevs, int, 0);
 +MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will "
@@ -464,149 +650,11 @@
 +MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See "
 +			"http://www.linuximq.net/ for more information.");
 +MODULE_LICENSE("GPL");
++MODULE_ALIAS_RTNL_LINK("imq");
 +
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -117,6 +117,129 @@
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called eql.  If unsure, say N.
- 
-+config IMQ
-+	tristate "IMQ (intermediate queueing device) support"
-+	depends on NETDEVICES && NETFILTER
-+	---help---
-+	  The IMQ device(s) is used as placeholder for QoS queueing
-+	  disciplines. Every packet entering/leaving the IP stack can be
-+	  directed through the IMQ device where it's enqueued/dequeued to the
-+	  attached qdisc. This allows you to treat network devices as classes
-+	  and distribute bandwidth among them. Iptables is used to specify
-+	  through which IMQ device, if any, packets travel.
-+
-+	  More information at: http://www.linuximq.net/
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called imq.  If unsure, say N.
-+
-+choice
-+	prompt "IMQ behavior (PRE/POSTROUTING)"
-+	depends on IMQ
-+	default IMQ_BEHAVIOR_BB
-+	help
-+
-+		This settings defines how IMQ behaves in respect to its
-+		hooking in PREROUTING and POSTROUTING.
-+
-+		IMQ can work in any of the following ways:
-+
-+		    PREROUTING   |      POSTROUTING
-+		-----------------|-------------------
-+		#1  After NAT    |      After NAT
-+		#2  After NAT    |      Before NAT
-+		#3  Before NAT   |      After NAT
-+		#4  Before NAT   |      Before NAT
-+
-+		The default behavior is to hook before NAT on PREROUTING
-+		and after NAT on POSTROUTING (#3).
-+
-+		This settings are specially usefull when trying to use IMQ
-+		to shape NATed clients.
-+
-+		More information can be found at: www.linuximq.net
-+
-+		If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_AA
-+	bool "IMQ AA"
-+	help
-+		This settings defines how IMQ behaves in respect to its
-+		hooking in PREROUTING and POSTROUTING.
-+
-+		Choosing this option will make IMQ hook like this:
-+
-+		PREROUTING:   After NAT
-+		POSTROUTING:  After NAT
-+
-+		More information can be found at: www.linuximq.net
-+
-+		If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_AB
-+	bool "IMQ AB"
-+	help
-+		This settings defines how IMQ behaves in respect to its
-+		hooking in PREROUTING and POSTROUTING.
-+
-+		Choosing this option will make IMQ hook like this:
-+
-+		PREROUTING:   After NAT
-+		POSTROUTING:  Before NAT
-+
-+		More information can be found at: www.linuximq.net
-+
-+		If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_BA
-+	bool "IMQ BA"
-+	help
-+		This settings defines how IMQ behaves in respect to its
-+		hooking in PREROUTING and POSTROUTING.
-+
-+		Choosing this option will make IMQ hook like this:
-+
-+		PREROUTING:   Before NAT
-+		POSTROUTING:  After NAT
-+
-+		More information can be found at: www.linuximq.net
-+
-+		If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_BB
-+	bool "IMQ BB"
-+	help
-+		This settings defines how IMQ behaves in respect to its
-+		hooking in PREROUTING and POSTROUTING.
-+
-+		Choosing this option will make IMQ hook like this:
-+
-+		PREROUTING:   Before NAT
-+		POSTROUTING:  Before NAT
-+
-+		More information can be found at: www.linuximq.net
-+
-+		If not sure leave the default settings alone.
-+
-+endchoice
-+
-+config IMQ_NUM_DEVS
-+
-+	int "Number of IMQ devices"
-+	range 2 16
-+	depends on IMQ
-+	default "16"
-+	help
-+
-+		This settings defines how many IMQ devices will be
-+		created.
-+
-+		The default value is 16.
-+
-+		More information can be found at: www.linuximq.net
-+
-+		If not sure leave the default settings alone.
-+
- config TUN
- 	tristate "Universal TUN/TAP device driver support"
- 	select CRC32
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -143,6 +143,7 @@
- obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
- 
- obj-$(CONFIG_DUMMY) += dummy.o
-+obj-$(CONFIG_IMQ) += imq.o
- obj-$(CONFIG_IFB) += ifb.o
- obj-$(CONFIG_MACVLAN) += macvlan.o
- obj-$(CONFIG_DE600) += de600.o
+diff --git a/include/linux/imq.h b/include/linux/imq.h
+new file mode 100644
+index 0000000..1447c4e
 --- /dev/null
 +++ b/include/linux/imq.h
 @@ -0,0 +1,9 @@
@@ -619,6 +667,9 @@
 +#define IMQ_F_ENQUEUE  0x80
 +
 +#endif /* _IMQ_H */
+diff --git a/include/linux/netfilter_ipv4/ipt_IMQ.h b/include/linux/netfilter_ipv4/ipt_IMQ.h
+new file mode 100644
+index 0000000..a304991
 --- /dev/null
 +++ b/include/linux/netfilter_ipv4/ipt_IMQ.h
 @@ -0,0 +1,8 @@
@@ -630,6 +681,9 @@
 +};
 +
 +#endif /* _IPT_IMQ_H */
+diff --git a/include/linux/netfilter_ipv6/ip6t_IMQ.h b/include/linux/netfilter_ipv6/ip6t_IMQ.h
+new file mode 100644
+index 0000000..605f549
 --- /dev/null
 +++ b/include/linux/netfilter_ipv6/ip6t_IMQ.h
 @@ -0,0 +1,8 @@
@@ -641,9 +695,11 @@
 +};
 +
 +#endif /* _IP6T_IMQ_H */
+diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
+index bbd8d00..f7d6f7e 100644
 --- a/include/linux/skbuff.h
 +++ b/include/linux/skbuff.h
-@@ -296,6 +296,10 @@
+@@ -296,6 +296,10 @@ struct sk_buff {
  	struct nf_conntrack	*nfct;
  	struct sk_buff		*nfct_reasm;
  #endif
@@ -654,7 +710,7 @@
  #ifdef CONFIG_BRIDGE_NETFILTER
  	struct nf_bridge_info	*nf_bridge;
  #endif
-@@ -1736,6 +1740,10 @@
+@@ -1736,6 +1740,10 @@ static inline void __nf_copy(struct sk_buff *dst, const struct sk_buff *src)
  	dst->nfct_reasm = src->nfct_reasm;
  	nf_conntrack_get_reasm(src->nfct_reasm);
  #endif
@@ -665,6 +721,8 @@
  #ifdef CONFIG_BRIDGE_NETFILTER
  	dst->nf_bridge  = src->nf_bridge;
  	nf_bridge_get(src->nf_bridge);
+diff --git a/net/core/dev.c b/net/core/dev.c
+index 460e7f9..094838b 100644
 --- a/net/core/dev.c
 +++ b/net/core/dev.c
 @@ -95,6 +95,9 @@
@@ -677,7 +735,7 @@
  #include <linux/proc_fs.h>
  #include <linux/seq_file.h>
  #include <linux/stat.h>
-@@ -1537,7 +1540,11 @@
+@@ -1537,7 +1540,11 @@ static int dev_gso_segment(struct sk_buff *skb)
  int dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
  {
  	if (likely(!skb->next)) {
@@ -690,6 +748,43 @@
  			dev_queue_xmit_nit(skb, dev);
  
  		if (netif_needs_gso(dev, skb)) {
+diff --git a/net/ipv4/netfilter/Kconfig b/net/ipv4/netfilter/Kconfig
+index 9a077cb..3bde19b 100644
+--- a/net/ipv4/netfilter/Kconfig
++++ b/net/ipv4/netfilter/Kconfig
+@@ -123,6 +123,17 @@ config IP_NF_FILTER
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config IP_NF_TARGET_IMQ
++       tristate "IMQ target support"
++       depends on IP_NF_MANGLE
++       help
++         This option adds a `IMQ' target which is used to specify if and
++         to which IMQ device packets should get enqueued/dequeued.
++
++	 For more information visit: http://www.linuximq.net/
++
++         To compile it as a module, choose M here.  If unsure, say N.
++
+ config IP_NF_TARGET_REJECT
+ 	tristate "REJECT target support"
+ 	depends on IP_NF_FILTER
+diff --git a/net/ipv4/netfilter/Makefile b/net/ipv4/netfilter/Makefile
+index 0c7dc78..7617528 100644
+--- a/net/ipv4/netfilter/Makefile
++++ b/net/ipv4/netfilter/Makefile
+@@ -51,6 +51,7 @@ obj-$(CONFIG_IP_NF_MATCH_TTL) += ipt_ttl.o
+ obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o
+ obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
+ obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
++obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o
+ obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
+ obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
+ obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
+diff --git a/net/ipv4/netfilter/ipt_IMQ.c b/net/ipv4/netfilter/ipt_IMQ.c
+new file mode 100644
+index 0000000..cda69a4
 --- /dev/null
 +++ b/net/ipv4/netfilter/ipt_IMQ.c
 @@ -0,0 +1,69 @@
@@ -709,7 +804,7 @@
 +			       const struct xt_target *target,
 +			       const void *targinfo)
 +{
-+	struct ipt_imq_info *mr = (struct ipt_imq_info*)targinfo;
++	struct ipt_imq_info *mr = (struct ipt_imq_info *)targinfo;
 +
 +	pskb->imq_flags = mr->todev | IMQ_F_ENQUEUE;
 +
@@ -724,7 +819,7 @@
 +{
 +	struct ipt_imq_info *mr;
 +
-+	mr = (struct ipt_imq_info*)targinfo;
++	mr = (struct ipt_imq_info *)targinfo;
 +
 +	if (mr->todev > IMQ_MAX_DEVS) {
 +		printk(KERN_WARNING
@@ -762,36 +857,41 @@
 +MODULE_AUTHOR("http://www.linuximq.net");
 +MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
 +MODULE_LICENSE("GPL");
---- a/net/ipv4/netfilter/Kconfig
-+++ b/net/ipv4/netfilter/Kconfig
-@@ -145,6 +145,17 @@
+diff --git a/net/ipv6/netfilter/Kconfig b/net/ipv6/netfilter/Kconfig
+index 6cae547..3b3b610 100644
+--- a/net/ipv6/netfilter/Kconfig
++++ b/net/ipv6/netfilter/Kconfig
+@@ -179,6 +179,15 @@ config IP6_NF_MANGLE
  
  	  To compile it as a module, choose M here.  If unsure, say N.
  
-+config IP_NF_TARGET_IMQ
-+       tristate "IMQ target support"
-+       depends on IP_NF_MANGLE
-+       help
-+         This option adds a `IMQ' target which is used to specify if and
-+         to which IMQ device packets should get enqueued/dequeued.
-+
-+	 For more information visit: http://www.linuximq.net/
++config IP6_NF_TARGET_IMQ
++	tristate "IMQ target support"
++	depends on IP6_NF_MANGLE
++	help
++          This option adds a `IMQ' target which is used to specify if and
++          to which imq device packets should get enqueued/dequeued.
 +
-+         To compile it as a module, choose M here.  If unsure, say N.
++          To compile it as a module, choose M here.  If unsure, say N.
 +
- config IP_NF_TARGET_REJECT
- 	tristate "REJECT target support"
- 	depends on IP_NF_FILTER
---- a/net/ipv4/netfilter/Makefile
-+++ b/net/ipv4/netfilter/Makefile
-@@ -55,6 +55,7 @@
- obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o
- obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
- obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
-+obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o
- obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
- obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
- obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
+ config IP6_NF_TARGET_HL
+ 	tristate  'HL (hoplimit) target support'
+ 	depends on IP6_NF_MANGLE
+diff --git a/net/ipv6/netfilter/Makefile b/net/ipv6/netfilter/Makefile
+index fbf2c14..dcfe80b 100644
+--- a/net/ipv6/netfilter/Makefile
++++ b/net/ipv6/netfilter/Makefile
+@@ -6,6 +6,7 @@
+ obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
+ obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o
+ obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o
++obj-$(CONFIG_IP6_NF_TARGET_IMQ) += ip6t_IMQ.o
+ obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o
+ obj-$(CONFIG_IP6_NF_RAW) += ip6table_raw.o
+ 
+diff --git a/net/ipv6/netfilter/ip6t_IMQ.c b/net/ipv6/netfilter/ip6t_IMQ.c
+new file mode 100644
+index 0000000..5cf7b72
 --- /dev/null
 +++ b/net/ipv6/netfilter/ip6t_IMQ.c
 @@ -0,0 +1,69 @@
@@ -811,7 +911,7 @@
 +			       const struct xt_target *target,
 +			       const void *targinfo)
 +{
-+	struct ip6t_imq_info *mr = (struct ip6t_imq_info*)targinfo;
++	struct ip6t_imq_info *mr = (struct ip6t_imq_info *)targinfo;
 +
 +	pskb->imq_flags = mr->todev | IMQ_F_ENQUEUE;
 +
@@ -826,7 +926,7 @@
 +{
 +	struct ip6t_imq_info *mr;
 +
-+	mr = (struct ip6t_imq_info*)targinfo;
++	mr = (struct ip6t_imq_info *)targinfo;
 +
 +	if (mr->todev > IMQ_MAX_DEVS) {
 +		printk(KERN_WARNING
@@ -864,37 +964,11 @@
 +MODULE_AUTHOR("http://www.linuximq.net");
 +MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
 +MODULE_LICENSE("GPL");
---- a/net/ipv6/netfilter/Kconfig
-+++ b/net/ipv6/netfilter/Kconfig
-@@ -179,6 +179,15 @@
- 
- 	  To compile it as a module, choose M here.  If unsure, say N.
- 
-+config IP6_NF_TARGET_IMQ
-+	tristate "IMQ target support"
-+	depends on IP6_NF_MANGLE
-+	help
-+          This option adds a `IMQ' target which is used to specify if and
-+          to which imq device packets should get enqueued/dequeued.
-+
-+          To compile it as a module, choose M here.  If unsure, say N.
-+
- config IP6_NF_TARGET_HL
- 	tristate  'HL (hoplimit) target support'
- 	depends on IP6_NF_MANGLE
---- a/net/ipv6/netfilter/Makefile
-+++ b/net/ipv6/netfilter/Makefile
-@@ -6,6 +6,7 @@
- obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
- obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o
- obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o
-+obj-$(CONFIG_IP6_NF_TARGET_IMQ) += ip6t_IMQ.o
- obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o
- obj-$(CONFIG_IP6_NF_RAW) += ip6table_raw.o
- 
+diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c
+index b741618..dcb916e 100644
 --- a/net/sched/sch_generic.c
 +++ b/net/sched/sch_generic.c
-@@ -203,6 +203,7 @@
+@@ -203,6 +203,7 @@ void __qdisc_run(struct net_device *dev)
  
  	clear_bit(__LINK_STATE_QDISC_RUNNING, &dev->state);
  }
diff --git a/target/linux/generic-2.6/patches-2.6.26/150-netfilter_imq.patch b/target/linux/generic-2.6/patches-2.6.26/150-netfilter_imq.patch
index 542c54ebbf..c99a30d235 100644
--- a/target/linux/generic-2.6/patches-2.6.26/150-netfilter_imq.patch
+++ b/target/linux/generic-2.6/patches-2.6.26/150-netfilter_imq.patch
@@ -1,6 +1,176 @@
+
+
+---
+
+ drivers/net/Kconfig                     |  123 ++++++++
+ drivers/net/Makefile                    |    1 
+ drivers/net/imq.c                       |  474 +++++++++++++++++++++++++++++++
+ include/linux/imq.h                     |    9 +
+ include/linux/netfilter_ipv4/ipt_IMQ.h  |    8 +
+ include/linux/netfilter_ipv6/ip6t_IMQ.h |    8 +
+ include/linux/skbuff.h                  |    8 +
+ net/core/dev.c                          |    9 +
+ net/ipv4/netfilter/Kconfig              |   11 +
+ net/ipv4/netfilter/Makefile             |    1 
+ net/ipv4/netfilter/ipt_IMQ.c            |   69 +++++
+ net/ipv6/netfilter/Kconfig              |    9 +
+ net/ipv6/netfilter/Makefile             |    1 
+ net/ipv6/netfilter/ip6t_IMQ.c           |   69 +++++
+ net/sched/sch_generic.c                 |    1 
+ 15 files changed, 800 insertions(+), 1 deletions(-)
+ create mode 100644 drivers/net/imq.c
+ create mode 100644 include/linux/imq.h
+ create mode 100644 include/linux/netfilter_ipv4/ipt_IMQ.h
+ create mode 100644 include/linux/netfilter_ipv6/ip6t_IMQ.h
+ create mode 100644 net/ipv4/netfilter/ipt_IMQ.c
+ create mode 100644 net/ipv6/netfilter/ip6t_IMQ.c
+
+
+--- a/drivers/net/Kconfig
++++ b/drivers/net/Kconfig
+@@ -117,6 +117,129 @@
+ 	  To compile this driver as a module, choose M here: the module
+ 	  will be called eql.  If unsure, say N.
+ 
++config IMQ
++	tristate "IMQ (intermediate queueing device) support"
++	depends on NETDEVICES && NETFILTER
++	---help---
++	  The IMQ device(s) is used as placeholder for QoS queueing
++	  disciplines. Every packet entering/leaving the IP stack can be
++	  directed through the IMQ device where it's enqueued/dequeued to the
++	  attached qdisc. This allows you to treat network devices as classes
++	  and distribute bandwidth among them. Iptables is used to specify
++	  through which IMQ device, if any, packets travel.
++
++	  More information at: http://www.linuximq.net/
++
++	  To compile this driver as a module, choose M here: the module
++	  will be called imq.  If unsure, say N.
++
++choice
++	prompt "IMQ behavior (PRE/POSTROUTING)"
++	depends on IMQ
++	default IMQ_BEHAVIOR_BB
++	help
++
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		IMQ can work in any of the following ways:
++
++		    PREROUTING   |      POSTROUTING
++		-----------------|-------------------
++		#1  After NAT    |      After NAT
++		#2  After NAT    |      Before NAT
++		#3  Before NAT   |      After NAT
++		#4  Before NAT   |      Before NAT
++
++		The default behavior is to hook before NAT on PREROUTING
++		and after NAT on POSTROUTING (#3).
++
++		This settings are specially usefull when trying to use IMQ
++		to shape NATed clients.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++	bool "IMQ AA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++	bool "IMQ AB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   After NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++	bool "IMQ BA"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  After NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++	bool "IMQ BB"
++	help
++		This settings defines how IMQ behaves in respect to its
++		hooking in PREROUTING and POSTROUTING.
++
++		Choosing this option will make IMQ hook like this:
++
++		PREROUTING:   Before NAT
++		POSTROUTING:  Before NAT
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++
++	int "Number of IMQ devices"
++	range 2 16
++	depends on IMQ
++	default "16"
++	help
++
++		This settings defines how many IMQ devices will be
++		created.
++
++		The default value is 16.
++
++		More information can be found at: www.linuximq.net
++
++		If not sure leave the default settings alone.
++
+ config TUN
+ 	tristate "Universal TUN/TAP device driver support"
+ 	select CRC32
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -142,6 +142,7 @@
+ obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
+ 
+ obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_IFB) += ifb.o
+ obj-$(CONFIG_MACVLAN) += macvlan.o
+ obj-$(CONFIG_DE600) += de600.o
 --- /dev/null
 +++ b/drivers/net/imq.c
-@@ -0,0 +1,464 @@
+@@ -0,0 +1,474 @@
 +/*
 + *             Pseudo-driver for the intermediate queue device.
 + *
@@ -54,6 +224,9 @@
 + *             qdisc_restart() and moved qdisc_run() to tasklet to avoid
 + *             recursive locking. (Jussi Kivilinna)
 + *
++ *             2008/06/14 - New initialization routines to fix 'rmmod' not
++ *             working anymore. Used code from ifb.c (Jussi Kivilinna)
++ *
 + *
 + *             More info at: http://www.linuximq.net/ (Andre Correa)
 + */
@@ -134,10 +307,10 @@
 +#if defined(CONFIG_IMQ_NUM_DEVS)
 +static unsigned int numdevs = CONFIG_IMQ_NUM_DEVS;
 +#else
-+static unsigned int numdevs = 16;
++static unsigned int numdevs = IMQ_MAX_DEVS;
 +#endif
 +
-+static struct net_device *imq_devs;
++static struct net_device *imq_devs_cache[IMQ_MAX_DEVS];
 +
 +static struct net_device_stats *imq_get_stats(struct net_device *dev)
 +{
@@ -183,7 +356,23 @@
 +	if (index > numdevs)
 +		return -1;
 +
-+	dev = imq_devs + index;
++	/* check for imq device by index from cache */
++	dev = imq_devs_cache[index];
++	if (!dev) {
++		char buf[8];
++
++		/* get device by name and cache result */
++		snprintf(buf, sizeof(buf), "imq%d", index);
++		dev = dev_get_by_name(&init_net, buf);
++		if (!dev) {
++			/* not found ?!*/
++			BUG();
++			return -1;
++		}
++
++		imq_devs_cache[index] = dev;
++	}
++
 +	priv = netdev_priv(dev);
 +	if (!(dev->flags & IFF_UP)) {
 +		entry->skb->imq_flags = 0;
@@ -213,11 +402,9 @@
 +			ret = 0;
 +		}
 +	}
-+
-+	spin_unlock_bh(&dev->queue_lock);
-+
 +	if (!test_and_set_bit(1, &priv->tasklet_pending))
 +		tasklet_schedule(&priv->tasklet);
++	spin_unlock_bh(&dev->queue_lock);
 +
 +	if (skb2)
 +		kfree_skb(ret ? entry->skb : skb2);
@@ -237,9 +424,8 @@
 +
 +	spin_lock(&dev->queue_lock);
 +	qdisc_run(dev);
-+	spin_unlock(&dev->queue_lock);
-+
 +	clear_bit(1, &priv->tasklet_pending);
++	spin_unlock(&dev->queue_lock);
 +}
 +
 +static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff *pskb,
@@ -273,6 +459,24 @@
 +	return 0;
 +}
 +
++static void imq_setup(struct net_device *dev)
++{
++	dev->hard_start_xmit    = imq_dev_xmit;
++	dev->open		= imq_open;
++	dev->get_stats		= imq_get_stats;
++	dev->stop		= imq_close;
++	dev->type               = ARPHRD_VOID;
++	dev->mtu                = 16000;
++	dev->tx_queue_len       = 11000;
++	dev->flags              = IFF_NOARP;
++}
++
++static struct rtnl_link_ops imq_link_ops __read_mostly = {
++	.kind		= "imq",
++	.priv_size	= sizeof(struct imq_private),
++	.setup		= imq_setup,
++};
++
 +static int __init imq_init_hooks(void)
 +{
 +	int err;
@@ -321,45 +525,33 @@
 +	return err;
 +}
 +
-+static void __exit imq_unhook(void)
-+{
-+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
-+	nf_unregister_hook(&imq_ingress_ipv6);
-+	nf_unregister_hook(&imq_egress_ipv6);
-+	nf_unregister_queue_handler(PF_INET6, &nfqh);
-+#endif
-+	nf_unregister_hook(&imq_ingress_ipv4);
-+	nf_unregister_hook(&imq_egress_ipv4);
-+	nf_unregister_queue_handler(PF_INET, &nfqh);
-+}
-+
-+static int __init imq_dev_init(struct net_device *dev)
++static int __init imq_init_one(int index)
 +{
-+	dev->hard_start_xmit    = imq_dev_xmit;
-+	dev->open		= imq_open;
-+	dev->get_stats		= imq_get_stats;
-+	dev->stop		= imq_close;
-+	dev->type               = ARPHRD_VOID;
-+	dev->mtu                = 16000;
-+	dev->tx_queue_len       = 11000;
-+	dev->flags              = IFF_NOARP;
++	struct net_device *dev;
++	int ret;
 +
-+	dev->priv = kzalloc(sizeof(struct imq_private), GFP_KERNEL);
-+	if (dev->priv == NULL)
++	dev = alloc_netdev(sizeof(struct imq_private), "imq%d", imq_setup);
++	if (!dev)
 +		return -ENOMEM;
 +
-+	return 0;
-+}
++	ret = dev_alloc_name(dev, dev->name);
++	if (ret < 0)
++		goto fail;
 +
-+static void imq_dev_uninit(struct net_device *dev)
-+{
-+	kfree(dev->priv);
++	dev->rtnl_link_ops = &imq_link_ops;
++	ret = register_netdevice(dev);
++	if (ret < 0)
++		goto fail;
++
++	return 0;
++fail:
++	free_netdev(dev);
++	return ret;
 +}
 +
-+static int __init imq_init_devs(struct net *net)
++static int __init imq_init_devs(void)
 +{
-+	struct net_device *dev;
-+	int i, j;
++	int err, i;
 +
 +	if (!numdevs || numdevs > IMQ_MAX_DEVS) {
 +		printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
@@ -367,48 +559,26 @@
 +		return -EINVAL;
 +	}
 +
-+	imq_devs = kzalloc(sizeof(struct net_device) * numdevs, GFP_KERNEL);
-+	if (!imq_devs)
-+		return -ENOMEM;
-+
-+	/* we start counting at zero */
-+	j = numdevs - 1;
++	rtnl_lock();
++	err = __rtnl_link_register(&imq_link_ops);
 +
-+	for (i = 0, dev = imq_devs; i <= j; i++, dev++) {
-+		strcpy(dev->name, "imq%d");
-+		dev->init   = imq_dev_init;
-+		dev->uninit = imq_dev_uninit;
-+		dev->nd_net = net;
++	for (i = 0; i < numdevs && !err; i++)
++		err = imq_init_one(i);
 +
-+		if (register_netdev(dev) < 0)
-+			goto err_register;
++	if (err) {
++		__rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
 +	}
-+	printk(KERN_INFO "IMQ starting with %u devices...\n", numdevs);
-+	return 0;
++	rtnl_unlock();
 +
-+err_register:
-+	for (; i; i--)
-+		unregister_netdev(--dev);
-+	kfree(imq_devs);
-+	return -EIO;
-+}
-+
-+static void imq_cleanup_devs(void)
-+{
-+	int i;
-+	struct net_device *dev = imq_devs;
-+
-+	for (i = 0; i <= numdevs; i++)
-+		unregister_netdev(dev++);
-+
-+	kfree(imq_devs);
++	return err;
 +}
 +
-+static __net_init int imq_init_module(struct net *net)
++static int __init imq_init_module(void)
 +{
 +	int err;
 +
-+	err = imq_init_devs(net);
++	err = imq_init_devs();
 +	if (err) {
 +		printk(KERN_ERR "IMQ: Error trying imq_init_devs(net)\n");
 +		return err;
@@ -417,7 +587,8 @@
 +	err = imq_init_hooks();
 +	if (err) {
 +		printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
-+		imq_cleanup_devs();
++		rtnl_link_unregister(&imq_link_ops);
++		memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
 +		return err;
 +	}
 +
@@ -437,25 +608,33 @@
 +	return 0;
 +}
 +
-+static __net_exit void imq_exit_module(struct net *net)
++static void __exit imq_unhook(void)
 +{
-+	imq_unhook();
-+	imq_cleanup_devs();
-+	printk(KERN_INFO "IMQ driver unloaded successfully.\n");
++#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
++	nf_unregister_hook(&imq_ingress_ipv6);
++	nf_unregister_hook(&imq_egress_ipv6);
++	nf_unregister_queue_handler(PF_INET6, &nfqh);
++#endif
++	nf_unregister_hook(&imq_ingress_ipv4);
++	nf_unregister_hook(&imq_egress_ipv4);
++	nf_unregister_queue_handler(PF_INET, &nfqh);
 +}
 +
-+static struct pernet_operations __net_initdata imq_net_ops = {
-+	.init = imq_init_module,
-+	.exit = imq_exit_module,
-+};
++static void __exit imq_cleanup_devs(void)
++{
++	rtnl_link_unregister(&imq_link_ops);
++	memset(imq_devs_cache, 0, sizeof(imq_devs_cache));
++}
 +
-+static int __init imq_init(void)
++static void __exit imq_exit_module(void)
 +{
-+	return register_pernet_device(&imq_net_ops);
++	imq_unhook();
++	imq_cleanup_devs();
++	printk(KERN_INFO "IMQ driver unloaded successfully.\n");
 +}
 +
-+module_init(imq_init);
-+/*module_exit(imq_cleanup_module);*/
++module_init(imq_init_module);
++module_exit(imq_exit_module);
 +
 +module_param(numdevs, int, 0);
 +MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will "
@@ -464,149 +643,8 @@
 +MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See "
 +			"http://www.linuximq.net/ for more information.");
 +MODULE_LICENSE("GPL");
++MODULE_ALIAS_RTNL_LINK("imq");
 +
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -117,6 +117,129 @@
- 	  To compile this driver as a module, choose M here: the module
- 	  will be called eql.  If unsure, say N.
- 
-+config IMQ
-+	tristate "IMQ (intermediate queueing device) support"
-+	depends on NETDEVICES && NETFILTER
-+	---help---
-+	  The IMQ device(s) is used as placeholder for QoS queueing
-+	  disciplines. Every packet entering/leaving the IP stack can be
-+	  directed through the IMQ device where it's enqueued/dequeued to the
-+	  attached qdisc. This allows you to treat network devices as classes
-+	  and distribute bandwidth among them. Iptables is used to specify
-+	  through which IMQ device, if any, packets travel.
-+
-+	  More information at: http://www.linuximq.net/
-+
-+	  To compile this driver as a module, choose M here: the module
-+	  will be called imq.  If unsure, say N.
-+
-+choice
-+	prompt "IMQ behavior (PRE/POSTROUTING)"
-+	depends on IMQ
-+	default IMQ_BEHAVIOR_BB
-+	help
-+
-+		This settings defines how IMQ behaves in respect to its
-+		hooking in PREROUTING and POSTROUTING.
-+
-+		IMQ can work in any of the following ways:
-+
-+		    PREROUTING   |      POSTROUTING
-+		-----------------|-------------------
-+		#1  After NAT    |      After NAT
-+		#2  After NAT    |      Before NAT
-+		#3  Before NAT   |      After NAT
-+		#4  Before NAT   |      Before NAT
-+
-+		The default behavior is to hook before NAT on PREROUTING
-+		and after NAT on POSTROUTING (#3).
-+
-+		This settings are specially usefull when trying to use IMQ
-+		to shape NATed clients.
-+
-+		More information can be found at: www.linuximq.net
-+
-+		If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_AA
-+	bool "IMQ AA"
-+	help
-+		This settings defines how IMQ behaves in respect to its
-+		hooking in PREROUTING and POSTROUTING.
-+
-+		Choosing this option will make IMQ hook like this:
-+
-+		PREROUTING:   After NAT
-+		POSTROUTING:  After NAT
-+
-+		More information can be found at: www.linuximq.net
-+
-+		If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_AB
-+	bool "IMQ AB"
-+	help
-+		This settings defines how IMQ behaves in respect to its
-+		hooking in PREROUTING and POSTROUTING.
-+
-+		Choosing this option will make IMQ hook like this:
-+
-+		PREROUTING:   After NAT
-+		POSTROUTING:  Before NAT
-+
-+		More information can be found at: www.linuximq.net
-+
-+		If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_BA
-+	bool "IMQ BA"
-+	help
-+		This settings defines how IMQ behaves in respect to its
-+		hooking in PREROUTING and POSTROUTING.
-+
-+		Choosing this option will make IMQ hook like this:
-+
-+		PREROUTING:   Before NAT
-+		POSTROUTING:  After NAT
-+
-+		More information can be found at: www.linuximq.net
-+
-+		If not sure leave the default settings alone.
-+
-+config IMQ_BEHAVIOR_BB
-+	bool "IMQ BB"
-+	help
-+		This settings defines how IMQ behaves in respect to its
-+		hooking in PREROUTING and POSTROUTING.
-+
-+		Choosing this option will make IMQ hook like this:
-+
-+		PREROUTING:   Before NAT
-+		POSTROUTING:  Before NAT
-+
-+		More information can be found at: www.linuximq.net
-+
-+		If not sure leave the default settings alone.
-+
-+endchoice
-+
-+config IMQ_NUM_DEVS
-+
-+	int "Number of IMQ devices"
-+	range 2 16
-+	depends on IMQ
-+	default "16"
-+	help
-+
-+		This settings defines how many IMQ devices will be
-+		created.
-+
-+		The default value is 16.
-+
-+		More information can be found at: www.linuximq.net
-+
-+		If not sure leave the default settings alone.
-+
- config TUN
- 	tristate "Universal TUN/TAP device driver support"
- 	select CRC32
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -142,6 +142,7 @@
- obj-$(CONFIG_XEN_NETDEV_FRONTEND) += xen-netfront.o
- 
- obj-$(CONFIG_DUMMY) += dummy.o
-+obj-$(CONFIG_IMQ) += imq.o
- obj-$(CONFIG_IFB) += ifb.o
- obj-$(CONFIG_MACVLAN) += macvlan.o
- obj-$(CONFIG_DE600) += de600.o
 --- /dev/null
 +++ b/include/linux/imq.h
 @@ -0,0 +1,9 @@
@@ -690,6 +728,36 @@
  			dev_queue_xmit_nit(skb, dev);
  
  		if (netif_needs_gso(dev, skb)) {
+--- a/net/ipv4/netfilter/Kconfig
++++ b/net/ipv4/netfilter/Kconfig
+@@ -145,6 +145,17 @@
+ 
+ 	  To compile it as a module, choose M here.  If unsure, say N.
+ 
++config IP_NF_TARGET_IMQ
++       tristate "IMQ target support"
++       depends on IP_NF_MANGLE
++       help
++         This option adds a `IMQ' target which is used to specify if and
++         to which IMQ device packets should get enqueued/dequeued.
++
++	 For more information visit: http://www.linuximq.net/
++
++         To compile it as a module, choose M here.  If unsure, say N.
++
+ config IP_NF_TARGET_REJECT
+ 	tristate "REJECT target support"
+ 	depends on IP_NF_FILTER
+--- a/net/ipv4/netfilter/Makefile
++++ b/net/ipv4/netfilter/Makefile
+@@ -58,6 +58,7 @@
+ obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o
+ obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
+ obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
++obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o
+ obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
+ obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
+ obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
 --- /dev/null
 +++ b/net/ipv4/netfilter/ipt_IMQ.c
 @@ -0,0 +1,69 @@
@@ -709,7 +777,7 @@
 +			       const struct xt_target *target,
 +			       const void *targinfo)
 +{
-+	struct ipt_imq_info *mr = (struct ipt_imq_info*)targinfo;
++	struct ipt_imq_info *mr = (struct ipt_imq_info *)targinfo;
 +
 +	pskb->imq_flags = mr->todev | IMQ_F_ENQUEUE;
 +
@@ -724,7 +792,7 @@
 +{
 +	struct ipt_imq_info *mr;
 +
-+	mr = (struct ipt_imq_info*)targinfo;
++	mr = (struct ipt_imq_info *)targinfo;
 +
 +	if (mr->todev > IMQ_MAX_DEVS) {
 +		printk(KERN_WARNING
@@ -762,36 +830,34 @@
 +MODULE_AUTHOR("http://www.linuximq.net");
 +MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
 +MODULE_LICENSE("GPL");
---- a/net/ipv4/netfilter/Kconfig
-+++ b/net/ipv4/netfilter/Kconfig
-@@ -145,6 +145,17 @@
+--- a/net/ipv6/netfilter/Kconfig
++++ b/net/ipv6/netfilter/Kconfig
+@@ -179,6 +179,15 @@
  
  	  To compile it as a module, choose M here.  If unsure, say N.
  
-+config IP_NF_TARGET_IMQ
-+       tristate "IMQ target support"
-+       depends on IP_NF_MANGLE
-+       help
-+         This option adds a `IMQ' target which is used to specify if and
-+         to which IMQ device packets should get enqueued/dequeued.
-+
-+	 For more information visit: http://www.linuximq.net/
++config IP6_NF_TARGET_IMQ
++	tristate "IMQ target support"
++	depends on IP6_NF_MANGLE
++	help
++          This option adds a `IMQ' target which is used to specify if and
++          to which imq device packets should get enqueued/dequeued.
 +
-+         To compile it as a module, choose M here.  If unsure, say N.
++          To compile it as a module, choose M here.  If unsure, say N.
 +
- config IP_NF_TARGET_REJECT
- 	tristate "REJECT target support"
- 	depends on IP_NF_FILTER
---- a/net/ipv4/netfilter/Makefile
-+++ b/net/ipv4/netfilter/Makefile
-@@ -58,6 +58,7 @@
- obj-$(CONFIG_IP_NF_TARGET_CLUSTERIP) += ipt_CLUSTERIP.o
- obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
- obj-$(CONFIG_IP_NF_TARGET_LOG) += ipt_LOG.o
-+obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o
- obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
- obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
- obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
+ config IP6_NF_TARGET_HL
+ 	tristate  'HL (hoplimit) target support'
+ 	depends on IP6_NF_MANGLE
+--- a/net/ipv6/netfilter/Makefile
++++ b/net/ipv6/netfilter/Makefile
+@@ -6,6 +6,7 @@
+ obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
+ obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o
+ obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o
++obj-$(CONFIG_IP6_NF_TARGET_IMQ) += ip6t_IMQ.o
+ obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o
+ obj-$(CONFIG_IP6_NF_RAW) += ip6table_raw.o
+ 
 --- /dev/null
 +++ b/net/ipv6/netfilter/ip6t_IMQ.c
 @@ -0,0 +1,69 @@
@@ -811,7 +877,7 @@
 +			       const struct xt_target *target,
 +			       const void *targinfo)
 +{
-+	struct ip6t_imq_info *mr = (struct ip6t_imq_info*)targinfo;
++	struct ip6t_imq_info *mr = (struct ip6t_imq_info *)targinfo;
 +
 +	pskb->imq_flags = mr->todev | IMQ_F_ENQUEUE;
 +
@@ -826,7 +892,7 @@
 +{
 +	struct ip6t_imq_info *mr;
 +
-+	mr = (struct ip6t_imq_info*)targinfo;
++	mr = (struct ip6t_imq_info *)targinfo;
 +
 +	if (mr->todev > IMQ_MAX_DEVS) {
 +		printk(KERN_WARNING
@@ -864,34 +930,6 @@
 +MODULE_AUTHOR("http://www.linuximq.net");
 +MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
 +MODULE_LICENSE("GPL");
---- a/net/ipv6/netfilter/Kconfig
-+++ b/net/ipv6/netfilter/Kconfig
-@@ -179,6 +179,15 @@
- 
- 	  To compile it as a module, choose M here.  If unsure, say N.
- 
-+config IP6_NF_TARGET_IMQ
-+	tristate "IMQ target support"
-+	depends on IP6_NF_MANGLE
-+	help
-+          This option adds a `IMQ' target which is used to specify if and
-+          to which imq device packets should get enqueued/dequeued.
-+
-+          To compile it as a module, choose M here.  If unsure, say N.
-+
- config IP6_NF_TARGET_HL
- 	tristate  'HL (hoplimit) target support'
- 	depends on IP6_NF_MANGLE
---- a/net/ipv6/netfilter/Makefile
-+++ b/net/ipv6/netfilter/Makefile
-@@ -6,6 +6,7 @@
- obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
- obj-$(CONFIG_IP6_NF_FILTER) += ip6table_filter.o
- obj-$(CONFIG_IP6_NF_MANGLE) += ip6table_mangle.o
-+obj-$(CONFIG_IP6_NF_TARGET_IMQ) += ip6t_IMQ.o
- obj-$(CONFIG_IP6_NF_QUEUE) += ip6_queue.o
- obj-$(CONFIG_IP6_NF_RAW) += ip6table_raw.o
- 
 --- a/net/sched/sch_generic.c
 +++ b/net/sched/sch_generic.c
 @@ -203,6 +203,7 @@