aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorJeff Kletsky <git-commits@allycomm.com>2019-04-10 08:28:01 -0700
committerChristian Lamparter <chunkeey@gmail.com>2019-05-18 13:43:51 +0200
commitb3770eaca39f223faecfcc0d169a1bb2f6f9464a (patch)
tree4697e1277e06775e1fdf0e36aadbe1f636b22806 /target
parent4bdc873a5fda60557478a4294983cf71e7eccea6 (diff)
downloadupstream-b3770eaca39f223faecfcc0d169a1bb2f6f9464a.tar.gz
upstream-b3770eaca39f223faecfcc0d169a1bb2f6f9464a.tar.bz2
upstream-b3770eaca39f223faecfcc0d169a1bb2f6f9464a.zip
mtd: base-files: Unify dual-firmware devices (Linksys)
Consistently handle boot-count reset and upgrade across ipq40xx, ipq806x, kirkwood, mvebu Dual-firmware devices often utilize a specific MTD partition to record the number of times the boot loader has initiated boot. Most of these devices are NAND, typically with a 2k erase size. When this code was ported to the ipq40xx platform, the device in hand used NOR for this partition, with a 16-byte "record" size. As the implementation of `mtd resetbc` is by-platform, the hard-coded nature of this change prevented proper operation of a NAND-based device. * Unified the "NOR" variant with the rest of the Linksys variants * Added logging to indicate success and failure * Provided a meaningful return value for scripting * "Protected" the use of `mtd resetbc` in start-up scripts so that failure does not end the boot sequence * Moved Linksys-specific actions into common `/etc/init.d/bootcount` For upgrade, these devices need to determine which partition to flash, as well as set certain U-Boot envirnment variables to change the next boot to the newly flashed version. * Moved upgrade-related environment changes out of bootcount * Combined multiple flashes of environment into single one * Current-partition detection now handles absence of `boot_part` Runtime-tested: Linksys EA8300 Signed-off-by: Jeff Kletsky <git-commits@allycomm.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [checkpatch.pl fixes, traded split strings for 80+ chars per line]
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ipq40xx/base-files/etc/init.d/bootcount3
-rwxr-xr-xtarget/linux/ipq40xx/base-files/etc/init.d/zlinksys_recovery34
-rwxr-xr-xtarget/linux/ipq40xx/base-files/lib/upgrade/linksys.sh61
-rwxr-xr-xtarget/linux/ipq806x/base-files/etc/init.d/bootcount13
-rwxr-xr-xtarget/linux/ipq806x/base-files/etc/init.d/linksys_recovery19
-rw-r--r--target/linux/ipq806x/base-files/lib/upgrade/linksys.sh57
-rwxr-xr-xtarget/linux/kirkwood/base-files/etc/init.d/bootcount14
-rwxr-xr-xtarget/linux/kirkwood/base-files/etc/init.d/linksys_recovery19
-rw-r--r--target/linux/kirkwood/base-files/lib/upgrade/linksys.sh52
-rwxr-xr-xtarget/linux/mvebu/base-files/etc/init.d/bootcount18
-rwxr-xr-xtarget/linux/mvebu/base-files/etc/init.d/linksys_recovery20
-rw-r--r--target/linux/mvebu/base-files/lib/upgrade/linksys.sh53
12 files changed, 202 insertions, 161 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/init.d/bootcount b/target/linux/ipq40xx/base-files/etc/init.d/bootcount
index 604f88c396..abde12412a 100755
--- a/target/linux/ipq40xx/base-files/etc/init.d/bootcount
+++ b/target/linux/ipq40xx/base-files/etc/init.d/bootcount
@@ -10,5 +10,8 @@ start() {
[ -n "$(fw_printenv bootcount changed 2>/dev/null)" ] &&\
echo -e "bootcount\nchanged\n" | /usr/sbin/fw_setenv -s -
;;
+ linksys,ea6350v3)
+ mtd resetbc s_env || true
+ ;;
esac
}
diff --git a/target/linux/ipq40xx/base-files/etc/init.d/zlinksys_recovery b/target/linux/ipq40xx/base-files/etc/init.d/zlinksys_recovery
deleted file mode 100755
index ac6533e3fe..0000000000
--- a/target/linux/ipq40xx/base-files/etc/init.d/zlinksys_recovery
+++ /dev/null
@@ -1,34 +0,0 @@
-#!/bin/sh /etc/rc.common
-#
-# This script sets auto_recovery to "yes" and resets the boot counter to 0.
-# As a golden rule, this should be the latest script to run at boot. For a
-# developer snapshot, it is fine to set auto_recovery here. But for a stable
-# release, this script must in fact turn off auto_recovery.
-#
-# Why? Because the custom sysupgrade script for the device will turn on
-# auto_recovery to "yes". And it's the job of this script to set the
-# boot boot_count to 0 and then disable auto_recovery, as that condition
-# means that the stable release went well.
-#
-# I have to repeat: this script should be changed for stable releases.
-
-START=99
-boot() {
- . /lib/functions.sh
-
- case $(board_name) in
- linksys,ea6350v3)
- # make sure auto_recovery in uboot is always on
- IS_AUTO_RECOVERY="$(fw_printenv -n auto_recovery)"
- if [ "$IS_AUTO_RECOVERY" != "yes" ] ; then
- fw_setenv auto_recovery yes
- echo "Linksys EA6350v3: fw_setenv: auto_recovery has been set to yes"
- fi
- # reset the boot counter
- fw_setenv boot_count 0
- mtd resetbc s_env
- echo "Linksys EA6350v3: boot counter has been reset"
- echo "Linksys EA6350v3: boot_part=$(fw_printenv -n boot_part)"
- ;;
- esac
-}
diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh b/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
index 9772d68f3d..b8e6dd7352 100755
--- a/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
+++ b/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
@@ -1,26 +1,51 @@
linksys_get_target_firmware() {
+
+ local cur_boot_part mtd_ubi0
+
cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part)
- target_firmware=""
- if [ "$cur_boot_part" = "1" ]; then
- # current primary boot - update alt boot
- target_firmware="alt_kernel"
- fw_setenv boot_part 2
- # In the Linksys EA6350v3, it is enough to set the boot_part as the boot command line is
- # bootcmd=if test $boot_part = 1; then run bootpart1; else run bootpart2; fi
- # - You probably want to use that if your device's uboot does not eval bootcmd
- #fw_setenv bootcmd "run altnandboot"
- elif [ "$cur_boot_part" = "2" ]; then
- # current alt boot - update primary boot
- target_firmware="kernel"
- fw_setenv boot_part 1
- #fw_setenv bootcmd "run nandboot"
+ if [ -z "${cur_boot_part}" ] ; then
+ mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
+ case $(egrep "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2) in
+ kernel|rootfs)
+ cur_boot_part=1
+ ;;
+ alt_kernel|alt_rootfs)
+ cur_boot_part=2
+ ;;
+ esac
+ >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+ "${cur_boot_part}" "${mtd_ubi0}"
fi
- # re-enable recovery so we get back if the new firmware is broken
- fw_setenv auto_recovery yes
- # see /etc/init.d/zlinksys_recovery
+ # OEM U-Boot for EA6350v3 and EA8300; bootcmd=
+ # if test $auto_recovery = no;
+ # then bootipq;
+ # elif test $boot_part = 1;
+ # then run bootpart1;
+ # else run bootpart2;
+ # fi
- echo "$target_firmware"
+ case $cur_boot_part in
+ 1)
+ fw_setenv -s - <<-EOF
+ boot_part 2
+ auto_recovery yes
+ EOF
+ printf "alt_kernel"
+ return
+ ;;
+ 2)
+ fw_setenv -s - <<-EOF
+ boot_part 1
+ auto_recovery yes
+ EOF
+ printf "kernel"
+ return
+ ;;
+ *)
+ return
+ ;;
+ esac
}
linksys_get_root_magic() {
diff --git a/target/linux/ipq806x/base-files/etc/init.d/bootcount b/target/linux/ipq806x/base-files/etc/init.d/bootcount
new file mode 100755
index 0000000000..6a5a6d52ad
--- /dev/null
+++ b/target/linux/ipq806x/base-files/etc/init.d/bootcount
@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+start() {
+ . /lib/functions.sh
+
+ case $(board_name) in
+ linksys,ea8500)
+ mtd resetbc s_env || true
+ ;;
+ esac
+}
diff --git a/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery b/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery
deleted file mode 100755
index 6b4b38ec7b..0000000000
--- a/target/linux/ipq806x/base-files/etc/init.d/linksys_recovery
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2015 OpenWrt.org
-
-START=97
-boot() {
-. /lib/functions.sh
-
-case $(board_name) in
- linksys,ea8500)
- # make sure auto_recovery in uboot is always on
- AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
- if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
- fw_setenv auto_recovery yes
- fi
- # reset the boot counter
- mtd resetbc s_env
- ;;
-esac
-}
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh b/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh
index 0234ce0a51..2aa6e0f08c 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/linksys.sh
@@ -3,28 +3,47 @@
#
linksys_get_target_firmware() {
- cur_boot_part=`/usr/sbin/fw_printenv -n boot_part`
- target_firmware=""
- if [ "$cur_boot_part" = "1" ]
- then
- # current primary boot - update alt boot
- target_firmware="kernel2"
- fw_setenv boot_part 2
- #In EA8500 bootcmd is always "bootipq", so don't change
- #fw_setenv bootcmd "run altnandboot"
- elif [ "$cur_boot_part" = "2" ]
- then
- # current alt boot - update primary boot
- target_firmware="kernel1"
- fw_setenv boot_part 1
- #In EA8500 bootcmd is always "bootipq", so don't change
- #fw_setenv bootcmd "run nandboot"
+
+ local cur_boot_part mtd_ubi0
+
+ cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part)
+ if [ -z "${cur_boot_part}" ] ; then
+ mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
+ case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in
+ kernel1|rootfs1)
+ cur_boot_part=1
+ ;;
+ kernel2|rootfs2)
+ cur_boot_part=2
+ ;;
+ esac
+ >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+ "${cur_boot_part}" "${mtd_ubi0}"
fi
- # re-enable recovery so we get back if the new firmware is broken
- fw_setenv auto_recovery yes
+ cur_boot_part=`/usr/sbin/fw_printenv -n boot_part`
- echo "$target_firmware"
+ case $cur_boot_part in
+ 1)
+ fw_setenv -s - <<-EOF
+ boot_part 2
+ auto_recovery yes
+ EOF
+ printf "kernel2"
+ return
+ ;;
+ 2)
+ fw_setenv -s - <<-EOF
+ boot_part 1
+ auto_recovery yes
+ EOF
+ printf "kernel1"
+ return
+ ;;
+ *)
+ return
+ ;;
+ esac
}
linksys_get_root_magic() {
diff --git a/target/linux/kirkwood/base-files/etc/init.d/bootcount b/target/linux/kirkwood/base-files/etc/init.d/bootcount
new file mode 100755
index 0000000000..20fb3a425c
--- /dev/null
+++ b/target/linux/kirkwood/base-files/etc/init.d/bootcount
@@ -0,0 +1,14 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+start() {
+ . /lib/functions.sh
+
+ case $(board_name) in
+ linksys,audi|\
+ linksys,viper)
+ mtd resetbc s_env || true
+ ;;
+ esac
+}
diff --git a/target/linux/kirkwood/base-files/etc/init.d/linksys_recovery b/target/linux/kirkwood/base-files/etc/init.d/linksys_recovery
deleted file mode 100755
index 8fd2f387ab..0000000000
--- a/target/linux/kirkwood/base-files/etc/init.d/linksys_recovery
+++ /dev/null
@@ -1,19 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2015 OpenWrt.org
-
-START=97
-boot() {
-. /lib/functions.sh
-
-case $(board_name) in
- linksys,audi|linksys,viper)
- # make sure auto_recovery in uboot is always on
- AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
- if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
- fw_setenv auto_recovery yes
- fi
- # reset the boot counter
- mtd resetbc s_env
- ;;
-esac
-}
diff --git a/target/linux/kirkwood/base-files/lib/upgrade/linksys.sh b/target/linux/kirkwood/base-files/lib/upgrade/linksys.sh
index dde3bd1b21..b89aad3d7e 100644
--- a/target/linux/kirkwood/base-files/lib/upgrade/linksys.sh
+++ b/target/linux/kirkwood/base-files/lib/upgrade/linksys.sh
@@ -3,23 +3,45 @@
#
linksys_get_target_firmware() {
- cur_boot_part=`/usr/sbin/fw_printenv -n boot_part`
- target_firmware=""
- if [ "$cur_boot_part" = "1" ]
- then
- # current primary boot - update alt boot
- target_firmware="kernel2"
- fw_setenv boot_part 2
- fw_setenv bootcmd "run altnandboot"
- elif [ "$cur_boot_part" = "2" ]
- then
- # current alt boot - update primary boot
- target_firmware="kernel1"
- fw_setenv boot_part 1
- fw_setenv bootcmd "run nandboot"
+
+ local cur_boot_part mtd_ubi0
+
+ cur_boot_part=$(/usr/sbin/fw_printenv -n boot_part)
+ if [ -z "${cur_boot_part}" ] ; then
+ mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
+ case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in
+ kernel|rootfs)
+ cur_boot_part=1
+ ;;
+ alt_kernel|alt_rootfs)
+ cur_boot_part=2
+ ;;
+ esac
+ >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+ "${cur_boot_part}" "${mtd_ubi0}"
fi
- echo "$target_firmware"
+ case $cur_boot_part in
+ 1)
+ fw_setenv -s - <<-EOF
+ boot_part 2
+ bootcmd "run altnandboot"
+ EOF
+ printf "kernel2"
+ return
+ ;;
+ 2)
+ fw_setenv -s - <<-EOF
+ boot_part 1
+ bootcmd "run nandboot"
+ EOF
+ printf "kernel1"
+ return
+ ;;
+ *)
+ return
+ ;;
+ esac
}
linksys_get_root_magic() {
diff --git a/target/linux/mvebu/base-files/etc/init.d/bootcount b/target/linux/mvebu/base-files/etc/init.d/bootcount
new file mode 100755
index 0000000000..6e8e310849
--- /dev/null
+++ b/target/linux/mvebu/base-files/etc/init.d/bootcount
@@ -0,0 +1,18 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+start() {
+ . /lib/functions.sh
+
+ case $(board_name) in
+ linksys,caiman |\
+ linksys,cobra |\
+ linksys,mamba |\
+ linksys,rango |\
+ linksys,shelby |\
+ linksys,venom)
+ mtd resetbc s_env || true
+ ;;
+ esac
+}
diff --git a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
deleted file mode 100755
index b4f375ec99..0000000000
--- a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery
+++ /dev/null
@@ -1,20 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2015-2016 OpenWrt.org
-# Copyright (C) 2016 LEDE-Project.org
-
-START=97
-boot() {
-. /lib/functions.sh
-
-case $(board_name) in
- linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom)
- # make sure auto_recovery in uboot is always on
- AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
- if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then
- fw_setenv auto_recovery yes
- fi
- # reset the boot counter
- mtd resetbc s_env
- ;;
-esac
-}
diff --git a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
index aacaf55667..3f45d6cac5 100644
--- a/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
+++ b/target/linux/mvebu/base-files/lib/upgrade/linksys.sh
@@ -3,26 +3,45 @@
#
linksys_get_target_firmware() {
+
+ local cur_boot_part mtd_ubi0
+
cur_boot_part=`/usr/sbin/fw_printenv -n boot_part`
- target_firmware=""
- if [ "$cur_boot_part" = "1" ]
- then
- # current primary boot - update alt boot
- target_firmware="kernel2"
- fw_setenv boot_part 2
- fw_setenv bootcmd "run altnandboot"
- elif [ "$cur_boot_part" = "2" ]
- then
- # current alt boot - update primary boot
- target_firmware="kernel1"
- fw_setenv boot_part 1
- fw_setenv bootcmd "run nandboot"
+ if [ -z "${cur_boot_part}" ] ; then
+ mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
+ case $(egrep ^mtd${mtd_ubi0}: /proc/mtd | cut -d '"' -f 2) in
+ kernel1|rootfs1)
+ cur_boot_part=1
+ ;;
+ kernel2|rootfs2)
+ cur_boot_part=2
+ ;;
+ esac
+ >&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+ "${cur_boot_part}" "${mtd_ubi0}"
fi
- # re-enable recovery so we get back if the new firmware is broken
- fw_setenv auto_recovery yes
-
- echo "$target_firmware"
+ case $cur_boot_part in
+ 1)
+ fw_setenv -s - <<-EOF
+ boot_part 2
+ bootcmd "run altnandboot"
+ EOF
+ printf "kernel2"
+ return
+ ;;
+ 2)
+ fw_setenv -s - <<-EOF
+ boot_part 1
+ bootcmd "run nandboot"
+ EOF
+ printf "kernel1"
+ return
+ ;;
+ *)
+ return
+ ;;
+ esac
}
linksys_get_root_magic() {