aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorImre Kaloz <kaloz@openwrt.org>2006-10-27 12:32:10 +0000
committerImre Kaloz <kaloz@openwrt.org>2006-10-27 12:32:10 +0000
commit93ab44d5d6c121fb5a971ff3684bc66f93f6c5fa (patch)
treed10866389a2c46c6114f9bd497681ef556edc662 /target
parent2d2179f503930a0f04673205a97161f015cf42c9 (diff)
downloadupstream-93ab44d5d6c121fb5a971ff3684bc66f93f6c5fa.tar.gz
upstream-93ab44d5d6c121fb5a971ff3684bc66f93f6c5fa.tar.bz2
upstream-93ab44d5d6c121fb5a971ff3684bc66f93f6c5fa.zip
add redboot parsing and rtl8169 fixes, enable r8169 and add the free ixp4xx ethernet driver - the later still needs fixes and testing for the gateway 7001
SVN-Revision: 5311
Diffstat (limited to 'target')
-rw-r--r--target/linux/generic-2.6/patches/050-mtdpart_redboot_byteswap_partition_truncate.patch61
-rw-r--r--target/linux/generic-2.6/patches/208-rtl8110sb_fix.patch35
-rw-r--r--target/linux/ixp4xx-2.6/config24
-rw-r--r--target/linux/ixp4xx-2.6/patches/100-npe_driver.patch3046
-rw-r--r--target/linux/ixp4xx-2.6/patches/101-npe_driver_fix_qmgr.patch36
-rw-r--r--target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch (renamed from target/linux/ixp4xx-2.6/patches/001-gateway_7001.patch)149
-rw-r--r--target/linux/x86-2.6/config2
7 files changed, 3296 insertions, 57 deletions
diff --git a/target/linux/generic-2.6/patches/050-mtdpart_redboot_byteswap_partition_truncate.patch b/target/linux/generic-2.6/patches/050-mtdpart_redboot_byteswap_partition_truncate.patch
new file mode 100644
index 0000000000..3aa60e0d9b
--- /dev/null
+++ b/target/linux/generic-2.6/patches/050-mtdpart_redboot_byteswap_partition_truncate.patch
@@ -0,0 +1,61 @@
+--- linux-2.6.18/drivers/mtd/redboot.c.orig 2006-10-23 11:41:56.000000000 -0400
++++ linux-2.6.18/drivers/mtd/redboot.c 2006-10-23 11:42:09.000000000 -0400
+@@ -92,22 +92,47 @@
+ * swab32(erasesize) then we know we are looking at
+ * a byte swapped FIS directory - swap all the entries!
+ * (NOTE: this is 'size' not 'data_length'; size is
+- * the full size of the entry.)
++ * the full size of the entry.)
++ *
++ * Handle cases where the FIS directory is less than
++ * a full erase block (like combine FIS directory
++ * and RedBoot config).
++ *
++ * IMHO the best solution would be to compute the
++ * flash address of the RedBoot FIS directory and
++ * compare that with the entry in the FIS directory
++ * entry swabbed. However, I haven't yet figured out
++ * how to compute that.
+ */
+- if (swab32(buf[i].size) == master->erasesize) {
++
++ unsigned long erasesize_mask = master->erasesize -1;
++ unsigned long eraseaddr_mask = 0xFFFFFFFF ^ erasesize_mask;
++
++ if (((swab32(buf[i].size)+erasesize_mask)
++ & eraseaddr_mask) == master->erasesize) {
+ int j;
+- for (j = 0; j < numslots && buf[j].name[0] != 0xff; ++j) {
++
++ /* N.B. The full table being processed so adjust size now */
++ numslots = swab32(buf[i].size) / sizeof (struct fis_image_desc);
++ for (j = 0; j < numslots; ++j) {
+ /* The unsigned long fields were written with the
+ * wrong byte sex, name and pad have no byte sex.
+- */
+- swab32s(&buf[j].flash_base);
+- swab32s(&buf[j].mem_base);
+- swab32s(&buf[j].size);
+- swab32s(&buf[j].entry_point);
+- swab32s(&buf[j].data_length);
+- swab32s(&buf[j].desc_cksum);
+- swab32s(&buf[j].file_cksum);
++ *
++ * Only process non-deleted entries. Don't exit early.
++ */
++ if (buf[j].name[0] != 0xff) {
++ swab32s(&buf[j].flash_base);
++ swab32s(&buf[j].mem_base);
++ swab32s(&buf[j].size);
++ swab32s(&buf[j].entry_point);
++ swab32s(&buf[j].data_length);
++ swab32s(&buf[j].desc_cksum);
++ swab32s(&buf[j].file_cksum);
++ }
+ }
++ } else {
++ /* Update numslots based on actual FIS directory size */
++ numslots = buf[i].size / sizeof (struct fis_image_desc);
+ }
+ break;
+ }
diff --git a/target/linux/generic-2.6/patches/208-rtl8110sb_fix.patch b/target/linux/generic-2.6/patches/208-rtl8110sb_fix.patch
new file mode 100644
index 0000000000..5d48342e63
--- /dev/null
+++ b/target/linux/generic-2.6/patches/208-rtl8110sb_fix.patch
@@ -0,0 +1,35 @@
+diff -Nur linux-2.6.17/drivers/net/r8169.c linux-2.6.17-owrt/drivers/net/r8169.c
+--- linux-2.6.17/drivers/net/r8169.c 2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/drivers/net/r8169.c 2006-10-27 13:18:46.000000000 +0200
+@@ -483,7 +483,7 @@
+ #endif
+
+ static const u16 rtl8169_intr_mask =
+- SYSErr | LinkChg | RxOverflow | RxFIFOOver | TxErr | TxOK | RxErr | RxOK;
++ LinkChg | RxOverflow | RxFIFOOver | TxErr | TxOK | RxErr | RxOK;
+ static const u16 rtl8169_napi_event =
+ RxOK | RxOverflow | RxFIFOOver | TxOK | TxErr;
+ static const unsigned int rtl8169_rx_config =
+@@ -1832,8 +1832,8 @@
+ */
+ RTL_W16(IntrMitigate, 0x0000);
+
+- RTL_W32(TxDescStartAddrLow, ((u64) tp->TxPhyAddr & DMA_32BIT_MASK));
+ RTL_W32(TxDescStartAddrHigh, ((u64) tp->TxPhyAddr >> 32));
++ RTL_W32(TxDescStartAddrLow, ((u64) tp->TxPhyAddr & DMA_32BIT_MASK));
+ RTL_W32(RxDescAddrLow, ((u64) tp->RxPhyAddr & DMA_32BIT_MASK));
+ RTL_W32(RxDescAddrHigh, ((u64) tp->RxPhyAddr >> 32));
+ RTL_W8(Cfg9346, Cfg9346_Lock);
+@@ -2535,10 +2535,12 @@
+ if (!(status & rtl8169_intr_mask))
+ break;
+
++#if 0
+ if (unlikely(status & SYSErr)) {
+ rtl8169_pcierr_interrupt(dev);
+ break;
+ }
++#endif
+
+ if (status & LinkChg)
+ rtl8169_check_link_status(dev, tp, ioaddr);
diff --git a/target/linux/ixp4xx-2.6/config b/target/linux/ixp4xx-2.6/config
index f28ecef50e..3e24c07b54 100644
--- a/target/linux/ixp4xx-2.6/config
+++ b/target/linux/ixp4xx-2.6/config
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.17
-# Sun Aug 6 11:18:40 2006
+# Fri Oct 27 13:36:15 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -243,7 +243,7 @@ CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
-# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m
CONFIG_TCP_CONG_ADVANCED=y
@@ -271,7 +271,7 @@ CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_INET6_XFRM_TUNNEL=m
-# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_TUNNEL=m
# CONFIG_IPV6_TUNNEL is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
@@ -385,7 +385,6 @@ CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_LOG is not set
CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_ROUTE=m
# CONFIG_IP6_NF_MANGLE is not set
# CONFIG_IP6_NF_RAW is not set
@@ -491,7 +490,7 @@ CONFIG_WIRELESS_EXT=y
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
+CONFIG_FW_LOADER=y
#
# Connector - unified userspace <-> kernelspace linker
@@ -732,6 +731,10 @@ CONFIG_IMQ_NUM_DEVS=2
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+CONFIG_IXP4XX_QMGR=m
+CONFIG_IXP4XX_NPE=m
+CONFIG_IXP4XX_FW_LOAD=y
+CONFIG_IXP4XX_MAC=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
@@ -827,7 +830,6 @@ CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
-CONFIG_HOSTAP_CS=m
CONFIG_NET_WIRELESS=y
#
@@ -1347,16 +1349,16 @@ CONFIG_FRAME_POINTER=y
# Cryptographic options
#
CONFIG_CRYPTO=y
-# CONFIG_CRYPTO_HMAC is not set
+CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
-# CONFIG_CRYPTO_SHA1 is not set
+CONFIG_CRYPTO_MD5=m
+CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
@@ -1367,7 +1369,7 @@ CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
diff --git a/target/linux/ixp4xx-2.6/patches/100-npe_driver.patch b/target/linux/ixp4xx-2.6/patches/100-npe_driver.patch
new file mode 100644
index 0000000000..e65838f3c2
--- /dev/null
+++ b/target/linux/ixp4xx-2.6/patches/100-npe_driver.patch
@@ -0,0 +1,3046 @@
+diff -Nur linux-2.6.17/Documentation/networking/ixp4xx/IxNpeMicrocode.h linux-2.6.17-owrt/Documentation/networking/ixp4xx/IxNpeMicrocode.h
+--- linux-2.6.17/Documentation/networking/ixp4xx/IxNpeMicrocode.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/Documentation/networking/ixp4xx/IxNpeMicrocode.h 2006-10-27 12:48:52.000000000 +0200
+@@ -0,0 +1,149 @@
++/*
++ * IxNpeMicrocode.h - Headerfile for compiling the Intel microcode C file
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ *
++ *
++ * compile with
++ *
++ * gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode
++ *
++ * Executing the resulting binary on your build-host creates the
++ * "NPE-[ABC].xxxxxxxx" files containing the selected microcode
++ * The options -le and -be controll the output format of the microcode
++ * the default is -be independent of the host endianess
++ *
++ * The download functions in the driver are smart enough to discover
++ * and correct firmware with wrong endianess
++ *
++ * fetch the IxNpeMicrocode.c from the Intel Access Library.
++ * It will include this header.
++ *
++ * select Images for every NPE from the following
++ * (used C++ comments for easy uncommenting ....)
++ */
++
++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_TSLOT_SWITCH
++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
++// #define IX_NPEDL_NPEIMAGE_NPEA_ETH_LEARN_FILTER_SPAN_FIREWALL
++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS_2_PORT
++// #define IX_NPEDL_NPEIMAGE_NPEA_DMA
++// #define IX_NPEDL_NPEIMAGE_NPEA_ATM_MPHY_12_PORT
++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_MPHY_1_PORT
++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0_ATM_SPHY_1_PORT
++// #define IX_NPEDL_NPEIMAGE_NPEA_HSS0
++// #define IX_NPEDL_NPEIMAGE_NPEA_WEP
++
++
++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEB_DMA
++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
++// #define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
++#define IX_NPEDL_NPEIMAGE_NPEB_ETH_LEARN_FILTER_SPAN_FIREWALL
++
++
++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_MASK_FIREWALL_VLAN_QOS_HDR_CONV_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_VLAN_QOS_HDR_CONV_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_MASK_FIREWALL_VLAN_QOS_EXTMIB
++// #define IX_NPEDL_NPEIMAGE_NPEC_DMA
++// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_SPAN
++// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_ETH_LEARN_FILTER_FIREWALL
++#define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_AES_CCM_ETH
++// #define IX_NPEDL_NPEIMAGE_NPEC_CRYPTO_ETH_LEARN_FILTER_SPAN_FIREWALL
++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_SPAN_FIREWALL_VLAN_QOS_HDR_CONV
++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL_VLAN_QOS
++// #define IX_NPEDL_NPEIMAGE_NPEC_ETH_LEARN_FILTER_SPAN_FIREWALL
++
++
++#include <stdio.h>
++#include <unistd.h>
++#include <stdlib.h>
++#include <netinet/in.h>
++#include <sys/types.h>
++#include <sys/stat.h>
++#include <fcntl.h>
++#include <errno.h>
++#include <endian.h>
++#include <byteswap.h>
++#include <string.h>
++
++#if __BYTE_ORDER == __LITTLE_ENDIAN
++#define to_le32(x) (x)
++#define to_be32(x) bswap_32(x)
++#else
++#define to_be32(x) (x)
++#define to_le32(x) bswap_32(x)
++#endif
++
++struct dl_image {
++ unsigned magic;
++ unsigned id;
++ unsigned size;
++ unsigned data[0];
++};
++
++const unsigned IxNpeMicrocode_array[];
++
++int main(int argc, char *argv[])
++{
++ struct dl_image *image = (struct dl_image *)IxNpeMicrocode_array;
++ int imgsiz, i, fd, cnt;
++ const unsigned *arrayptr = IxNpeMicrocode_array;
++ const char *names[] = { "IXP425", "IXP465", "unknown" };
++ int bigendian = 1;
++
++ if (argc > 1) {
++ if (!strcmp(argv[1], "-le"))
++ bigendian = 0;
++ else if (!strcmp(argv[1], "-be"))
++ bigendian = 1;
++ else {
++ printf("Usage: %s <-le|-be>\n", argv[0]);
++ return EXIT_FAILURE;
++ }
++ }
++ printf("Output format is %s endian\n", bigendian ? "big" : "little");
++
++ for (image = (struct dl_image *)arrayptr, cnt=0;
++ (image->id != 0xfeedf00d) && (image->magic == 0xfeedf00d);
++ image = (struct dl_image *)(arrayptr), cnt++)
++ {
++ unsigned char field[4];
++ imgsiz = image->size + 3;
++ *(unsigned*)field = to_be32(image->id);
++ char filename[40], slnk[10];
++
++ sprintf(filename, "NPE-%c.%08x", (field[0] & 0xf) + 'A',
++ image->id);
++ sprintf(slnk, "NPE-%c", (field[0] & 0xf) + 'A');
++ printf("Writing image: %s.NPE_%c Func: %2x Rev: %02x.%02x "
++ "Size: %5d to: '%s'\n",
++ names[field[0] >> 4], (field[0] & 0xf) + 'A',
++ field[1], field[2], field[3], imgsiz*4, filename);
++ fd = open(filename, O_CREAT | O_RDWR | O_TRUNC, 0644);
++ if (fd >= 0) {
++ for (i=0; i<imgsiz; i++) {
++ *(unsigned*)field = bigendian ?
++ to_be32(arrayptr[i]) :
++ to_le32(arrayptr[i]);
++ write(fd, field, sizeof(field));
++ }
++ close(fd);
++ unlink(slnk);
++ symlink(filename, slnk);
++ } else {
++ perror(filename);
++ }
++ arrayptr += imgsiz;
++ }
++ close(fd);
++ return 0;
++}
+diff -Nur linux-2.6.17/Documentation/networking/ixp4xx/README linux-2.6.17-owrt/Documentation/networking/ixp4xx/README
+--- linux-2.6.17/Documentation/networking/ixp4xx/README 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/Documentation/networking/ixp4xx/README 2006-10-27 12:48:52.000000000 +0200
+@@ -0,0 +1,72 @@
++Informations about the Networking Driver using the IXP4XX CPU internal NPEs
++and Queue manager.
++
++If this driver is used, the IAL (Intel Access Library) must not be loaded.
++However, the IAL may be loaded, if this Modules are unloaded:
++ ixp4xx_npe.ko, ixp4xx_qmgr.ko ixp4xx_mac.ko
++
++This also means that HW crypto accelleration does NOT work when using this
++driver, unless I have finished my crypto driver for NPE-C
++
++
++Adoption to your custom board:
++------------------------------
++use "arch/arm/mach-ixp4xx/ixdp425-setup.c" as template:
++
++in "static struct mac_plat_info" adopt the entry "phy_id" to your needs
++(Ask your hardware designer about the PHY id)
++If in doubt, try the values from the ixdp425 board.
++
++The order of "&mac0" and "&mac1" in the "struct platform_device"
++determines which of them becomes eth0 and eth1.
++
++
++The Microcode:
++---------------
++
++The Download functions below are endianess independent.
++If the image comes in wrong endianess, it is swapped automatically.
++
++Solution 1)
++ Configure "CONFIG_HOTPLUG" and "CONFIG_FW_LOADER" and configure
++ IXP4XX_NPE as module.
++ The default hotplug script will load the Firmware from
++ /usr/lib/hotplug/firmware/NPE-[ABC]
++ see Documentation/firmware_class/hotplug-script
++
++ You should take care, that $ACTION is "add" and $SUBSYSTEM is "firmware"
++ to avoid unnessecary calls:
++ test $ACTION = "remove" -o $SUBSYSTEM != "firmware" && exit
++
++Solution 2)
++ create a char-dev: "mknod /dev/ixp4xx_ucode c 10 184".
++ If you are using "udev" or busybox "mdev", they will do this
++ for you automatically during module load.
++ cat the Microcode into it:
++ cat /usr/lib/hotplug/firmware/NPE-* > /dev/ixp4xx_ucode
++ This also works if the driver is linked to the kernel
++
++Having a mix of both (e.g. solution 1 for NPE-B and solution 2 for NPE-C)
++is perfectly ok and works.
++
++The state of the NPEs can be seen and changed at:
++/sys/bus/platform/devices/ixp4xx_npe.X/state
++
++
++Obtaining the Microcode:
++------------------------
++1) IxNpeMicrocode.h in this directory:
++ Download IPL_IXP400NPELIBRARYWITHCRYPTO-2_1.ZIP from Intel
++ It unpacks the Microcode IxNpeMicrocode.c
++ Read the Licence !
++ Read the top of IxNpeMicrocode.h for more details.
++ Compile it with "gcc -Wall IxNpeMicrocode.c -o IxNpeMicrocode" on your host.
++ The resulting images can be moved to "/usr/lib/hotplug/firmware"
++ The endianeess of the written microcode can be controlled by the
++ switches -le -be. Default is big-endian.
++
++2) mc_grab.c in this directory:
++ Compile and execute it either on the host or on the target
++ to grab the microcode from a binary image like the RedBoot bootloader.
++ (big-endian images only)
++
+diff -Nur linux-2.6.17/Documentation/networking/ixp4xx/mc_grab.c linux-2.6.17-owrt/Documentation/networking/ixp4xx/mc_grab.c
+--- linux-2.6.17/Documentation/networking/ixp4xx/mc_grab.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/Documentation/networking/ixp4xx/mc_grab.c 2006-10-27 12:48:52.000000000 +0200
+@@ -0,0 +1,97 @@
++/*
++ * mc_grab.c - grabs IXP4XX microcode from a binary datastream
++ * e.g. The redboot bootloader....
++ *
++ * usage: mc_grab 1010200 2010200 < /dev/mtd/0 > /dev/misc/npe
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++
++#include <stdlib.h>
++#include <stdio.h>
++#include <unistd.h>
++#include <netinet/in.h>
++#include <sys/types.h>
++#include <sys/stat.h>
++#include <fcntl.h>
++#include <errno.h>
++#include <string.h>
++
++#define MAX_IMG 6
++
++static void print_mc_info(unsigned id, int siz)
++{
++ unsigned char buf[sizeof(unsigned)];
++ *(unsigned*)buf = id;
++ unsigned idx;
++ const char *names[] = { "IXP425", "IXP465", "unknown" };
++
++ idx = (buf[0] >> 4) < 2 ? (buf[0] >> 4) : 2;
++
++ fprintf(stderr, "Device: %s:NPE_%c Func: %2x Rev: %02x.%02x "
++ "Size: %5d bytes ID:%08x\n", names[idx], (buf[0] & 0xf)+'A',
++ buf[1], buf[2], buf[3], siz*4, ntohl(id));
++}
++
++int main(int argc, char *argv[])
++{
++ int i,j;
++ unsigned char buf[sizeof(unsigned)];
++ unsigned magic = htonl(0xfeedf00d);
++ unsigned id, my_ids[MAX_IMG+1], siz, sizbe;
++ int ret=1, verbose=0;
++
++ for (i=0, j=0; i<argc-1 && j<MAX_IMG; i++) {
++ if (!strcmp(argv[i+1], "-v"))
++ verbose = 1;
++ else
++ my_ids[j++] = htonl(strtoul(argv[i+1], NULL, 16));
++ }
++ my_ids[j] = 0;
++ if (my_ids[0] == 0 && !verbose) {
++ fprintf(stderr, "Usage: %s <-v> [ID1] [ID2] [IDn]\n", argv[0]);
++ return 1;
++ }
++
++ while ((ret=read(0, buf, sizeof(unsigned))) == sizeof(unsigned)) {
++ if (*(unsigned*)buf != magic)
++ continue;
++ if ((ret=read(0, buf, sizeof(unsigned))) != sizeof(unsigned) )
++ break;
++ id = *(unsigned*)buf;
++
++ if (read(0, buf, sizeof(siz)) != sizeof(siz) )
++ break;
++ sizbe = *(unsigned*)buf;
++ siz = ntohl(sizbe);
++
++ if (verbose)
++ print_mc_info(id, siz);
++
++ for(i=0; my_ids[i]; i++)
++ if (id == my_ids[i])
++ break;
++ if (!my_ids[i])
++ continue;
++
++ if (!verbose)
++ print_mc_info(id, siz);
++
++ write(1, &magic, sizeof(magic));
++ write(1, &id, sizeof(id));
++ write(1, &sizbe, sizeof(sizbe));
++ for (i=0; i<siz; i++) {
++ if (read(0, buf, sizeof(unsigned)) != sizeof(unsigned))
++ break;
++ write(1, buf, sizeof(unsigned));
++ }
++ if (i != siz)
++ break;
++ }
++ if (ret)
++ fprintf(stderr, "Error reading Microcode\n");
++ return ret;
++}
+diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/common.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/common.c
+--- linux-2.6.17/arch/arm/mach-ixp4xx/common.c 2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/common.c 2006-10-27 12:50:32.000000000 +0200
+@@ -341,6 +341,97 @@
+ &ixp46x_i2c_controller
+ };
+
++static struct npe_plat_data npea = {
++ .name = "NPE-A",
++ .data_size = 0x800,
++ .inst_size = 0x1000,
++ .id = 0,
++};
++
++static struct npe_plat_data npeb = {
++ .name = "NPE-B",
++ .data_size = 0x800,
++ .inst_size = 0x800,
++ .id = 1,
++};
++
++static struct npe_plat_data npec = {
++ .name = "NPE-C",
++ .data_size = 0x800,
++ .inst_size = 0x800,
++ .id = 2,
++};
++
++static struct resource res_npea = {
++ .start = IXP4XX_NPEA_BASE_PHYS,
++ .end = IXP4XX_NPEA_BASE_PHYS + 0xfff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_npeb = {
++ .start = IXP4XX_NPEB_BASE_PHYS,
++ .end = IXP4XX_NPEB_BASE_PHYS + 0xfff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_npec = {
++ .start = IXP4XX_NPEC_BASE_PHYS,
++ .end = IXP4XX_NPEC_BASE_PHYS + 0xfff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct platform_device dev_npea = {
++ .name = "ixp4xx_npe",
++ .id = 0,
++ .dev.platform_data = &npea,
++ .num_resources = 1,
++ .resource = &res_npea,
++};
++
++static struct platform_device dev_npeb = {
++ .name = "ixp4xx_npe",
++ .id = 1,
++ .dev.platform_data = &npeb,
++ .num_resources = 1,
++ .resource = &res_npeb,
++};
++
++static struct platform_device dev_npec = {
++ .name = "ixp4xx_npe",
++ .id = 2,
++ .dev.platform_data = &npec,
++ .num_resources = 1,
++ .resource = &res_npec,
++};
++
++/* QMGR */
++static struct resource res_qmgr[] = {
++{
++ .start = IXP4XX_QMGR_BASE_PHYS,
++ .end = IXP4XX_QMGR_BASE_PHYS + IXP4XX_QMGR_REGION_SIZE -1,
++ .flags = IORESOURCE_MEM,
++}, {
++ .start = IRQ_IXP4XX_QM1,
++ .flags = IORESOURCE_IRQ,
++} };
++
++static struct platform_device qmgr = {
++ .name = "ixp4xx_qmgr",
++ .id = 0,
++ .dev = {
++ .coherent_dma_mask = DMA_31BIT_MASK,
++ },
++ .num_resources = ARRAY_SIZE(res_qmgr),
++ .resource = res_qmgr,
++};
++
++static struct platform_device *npes_qmgr[] __initdata = {
++ &qmgr,
++ &dev_npea,
++ &dev_npeb,
++ &dev_npec,
++};
++
+ unsigned long ixp4xx_exp_bus_size;
+ EXPORT_SYMBOL(ixp4xx_exp_bus_size);
+
+@@ -360,7 +451,10 @@
+ break;
+ }
+ }
++ npeb.inst_size = 0x1000;
++ npec.inst_size = 0x1000;
+ }
++ platform_add_devices(npes_qmgr, ARRAY_SIZE(npes_qmgr));
+
+ printk("IXP4xx: Using %luMiB expansion bus window size\n",
+ ixp4xx_exp_bus_size >> 20);
+diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/ixdp425-setup.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/ixdp425-setup.c
+--- linux-2.6.17/arch/arm/mach-ixp4xx/ixdp425-setup.c 2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/ixdp425-setup.c 2006-10-27 12:48:54.000000000 +0200
+@@ -101,10 +101,57 @@
+ .resource = ixdp425_uart_resources
+ };
+
++/* MACs */
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_mac1 = {
++ .start = IXP4XX_EthC_BASE_PHYS,
++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 0,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++};
++
++static struct mac_plat_info plat_mac1 = {
++ .npe_id = 2,
++ .phy_id = 1,
++ .eth_id = 1,
++ .rxq_id = 28,
++ .txq_id = 25,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
++static struct platform_device mac1 = {
++ .name = "ixp4xx_mac",
++ .id = 1,
++ .dev.platform_data = &plat_mac1,
++ .num_resources = 1,
++ .resource = &res_mac1,
++};
++
+ static struct platform_device *ixdp425_devices[] __initdata = {
+ &ixdp425_i2c_controller,
+ &ixdp425_flash,
+- &ixdp425_uart
++ &ixdp425_uart,
++ &mac0,
++ &mac1,
+ };
+
+ static void __init ixdp425_init(void)
+diff -Nur linux-2.6.17/drivers/net/Kconfig linux-2.6.17-owrt/drivers/net/Kconfig
+--- linux-2.6.17/drivers/net/Kconfig 2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/drivers/net/Kconfig 2006-10-27 12:48:54.000000000 +0200
+@@ -187,6 +187,8 @@
+
+ source "drivers/net/arm/Kconfig"
+
++source "drivers/net/ixp4xx/Kconfig"
++
+ config MACE
+ tristate "MACE (Power Mac ethernet) support"
+ depends on NET_ETHERNET && PPC_PMAC && PPC32
+diff -Nur linux-2.6.17/drivers/net/Makefile linux-2.6.17-owrt/drivers/net/Makefile
+--- linux-2.6.17/drivers/net/Makefile 2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/drivers/net/Makefile 2006-10-27 12:48:54.000000000 +0200
+@@ -208,6 +208,7 @@
+ obj-$(CONFIG_IRDA) += irda/
+ obj-$(CONFIG_ETRAX_ETHERNET) += cris/
+ obj-$(CONFIG_ENP2611_MSF_NET) += ixp2000/
++obj-$(CONFIG_IXP4XX_NPE) += ixp4xx/
+
+ obj-$(CONFIG_NETCONSOLE) += netconsole.o
+
+diff -Nur linux-2.6.17/drivers/net/ixp4xx/Kconfig linux-2.6.17-owrt/drivers/net/ixp4xx/Kconfig
+--- linux-2.6.17/drivers/net/ixp4xx/Kconfig 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/drivers/net/ixp4xx/Kconfig 2006-10-27 12:48:54.000000000 +0200
+@@ -0,0 +1,40 @@
++config IXP4XX_QMGR
++ tristate "IXP4xx Queue Manager support"
++ depends on ARCH_IXP4XX
++ depends on NET_ETHERNET
++ help
++ The IXP4XX Queue manager is a configurable hardware ringbuffer.
++ It is used by the NPEs to exchange data from and to the CPU.
++ You can either use this OR the Intel Access Library (IAL)
++
++config IXP4XX_NPE
++ tristate "IXP4xx NPE support"
++ depends on ARCH_IXP4XX
++ depends on NET_ETHERNET
++ help
++ The IXP4XX NPE driver supports the 3 CPU co-processors called
++ "Network Processing Engines" (NPE). It adds support fo downloading
++ the Microcode (firmware) via Hotplug or character-special-device.
++ More about this at: Documentation/networking/ixp4xx/README.
++ You can either use this OR the Intel Access Library (IAL)
++
++config IXP4XX_FW_LOAD
++ bool "Use Firmware hotplug for Microcode download"
++ depends on IXP4XX_NPE
++ select HOTPLUG
++ select FW_LOADER
++ help
++ The default hotplug script will load the Firmware from
++ /usr/lib/hotplug/firmware/NPE-[ABC]
++ see Documentation/firmware_class/hotplug-script
++
++config IXP4XX_MAC
++ tristate "IXP4xx MAC support"
++ depends on IXP4XX_NPE
++ depends on IXP4XX_QMGR
++ depends on NET_ETHERNET
++ select MII
++ help
++ The IXP4XX MAC driver supports the MACs on the IXP4XX CPUs.
++ There are 2 on ixp425 and up to 5 on ixdp465.
++ You can either use this OR the Intel Access Library (IAL)
+diff -Nur linux-2.6.17/drivers/net/ixp4xx/Makefile linux-2.6.17-owrt/drivers/net/ixp4xx/Makefile
+--- linux-2.6.17/drivers/net/ixp4xx/Makefile 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/drivers/net/ixp4xx/Makefile 2006-10-27 12:48:54.000000000 +0200
+@@ -0,0 +1,6 @@
++obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
++obj-$(CONFIG_IXP4XX_NPE) += ixp4xx_npe.o
++obj-$(CONFIG_IXP4XX_MAC) += ixp4xx_mac.o
++
++ixp4xx_npe-objs := ucode_dl.o npe_mh.o
++ixp4xx_mac-objs := mac_driver.o qmgr_eth.o phy.o
+diff -Nur linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c linux-2.6.17-owrt/drivers/net/ixp4xx/ixp4xx_qmgr.c
+--- linux-2.6.17/drivers/net/ixp4xx/ixp4xx_qmgr.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/drivers/net/ixp4xx/ixp4xx_qmgr.c 2006-10-27 12:48:54.000000000 +0200
+@@ -0,0 +1,390 @@
++/*
++ * qmgr.c - reimplementation of the queue configuration interface.
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/dmapool.h>
++#include <linux/interrupt.h>
++#include <linux/err.h>
++#include <asm/uaccess.h>
++#include <asm/io.h>
++
++#include <linux/ixp_qmgr.h>
++#include <linux/ixp_npe.h>
++
++#define IXQMGR_VERSION "IXP4XX Q Manager 0.2.0"
++
++static struct device *qmgr_dev = NULL;
++
++int queue_len(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ int diff, offs;
++ u32 val;
++
++ offs = queue->id/8 + QUE_LOW_STAT0;
++ val = *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id);
++
++ diff = (val - (val >> 7)) & 0x7f;
++ if (!diff) {
++ /* diff == 0 means either empty or full, must look at STAT0 */
++ if ((*(qmgr->addr + offs) >> ((queue->id % 8)*4)) & 0x04)
++ diff = queue->len;
++ }
++ return diff;
++}
++
++static int request_pool(struct device *dev, int count)
++{
++ int i;
++ struct npe_cont *cont;
++ struct qm_qmgr *qmgr = dev_get_drvdata(dev);
++ dma_addr_t handle;
++
++ for (i=0; i<count; i++) {
++ cont = dma_pool_alloc(qmgr->dmapool, GFP_KERNEL, &handle);
++ if (!cont) {
++ return -ENOMEM;
++ }
++ cont->phys = handle;
++ cont->virt = cont;
++ write_lock(&qmgr->lock);
++ cont->next = qmgr->pool;
++ qmgr->pool = cont;
++ write_unlock(&qmgr->lock);
++ }
++ return 0;
++}
++
++static int free_pool(struct device *dev, int count)
++{
++ int i;
++ struct npe_cont *cont;
++ struct qm_qmgr *qmgr = dev_get_drvdata(dev);
++
++ for (i=0; i<count; i++) {
++ write_lock(&qmgr->lock);
++ cont = qmgr->pool;
++ if (!cont) {
++ write_unlock(&qmgr->lock);
++ return -1;
++ }
++ qmgr->pool = cont->next;
++ write_unlock(&qmgr->lock);
++ dma_pool_free(qmgr->dmapool, cont, cont->phys);
++ }
++ return 0;
++}
++
++static int get_free_qspace(struct qm_qmgr *qmgr, int len)
++{
++ int words = (qmgr->res->end - qmgr->res->start + 1) / 4 -
++ IX_QMGR_SRAM_SPACE;
++ int i,q;
++
++ for (i=0; i<words; i+=len) {
++ for (q=0; q<MAX_QUEUES; q++) {
++ struct qm_queue *qu = qmgr->queues[q];
++ if (!qu)
++ continue;
++ if ((qu->addr + qu->len > i) && (qu->addr < i + len))
++ break;
++ }
++ if (q == MAX_QUEUES) {
++ /* we have a free address */
++ return i;
++ }
++ }
++ return -1;
++}
++
++static inline int log2(int x)
++{
++ int r=0;
++ while(x>>=1)
++ r++;
++ return r;
++}
++
++/*
++ * 32bit Config registers at IX_QMGR_QUECONFIG_BASE_OFFSET[Qid]
++ * 0 - 6 WRPTR Word offset to baseaddr (index 0 .. BSIZE-1)
++ * 7 -13 RDPTR ''
++ * 14 -21 BADDR baseaddr = (offset to IX_QMGR_QUEBUFFER_SPACE_OFFSET) >> 6
++ * 22 -23 ESIZE entrySizeInWords (always 00 because entrySizeInWords==1)
++ * 24 -25 BSIZE qSizeInWords 00=16,01=32,10=64,11=128
++ * 26 -28 NE nearly empty
++ * 29 -31 NF nearly full
++ */
++static int conf_q_regs(struct qm_queue *queue)
++{
++ int bsize = log2(queue->len/16);
++ int baddr = queue->addr + IX_QMGR_QCFG_SIZE;
++
++ /* +2, because baddr is in words and not in bytes */
++ queue_write_cfg_reg(queue, (bsize << 24) | (baddr<<(14-6+2)) );
++
++ return 0;
++}
++
++void queue_set_watermarks(struct qm_queue *queue, unsigned ne, unsigned nf)
++{
++ u32 val;
++ /* calculate the register values
++ * 0->0, 1->1, 2->2, 4->3, 8->4 16->5...*/
++ ne = log2(ne<<1) & 0x7;
++ nf = log2(nf<<1) & 0x7;
++
++ /* Mask out old watermarks */
++ val = queue_read_cfg_reg(queue) & ~0xfc000000;
++ queue_write_cfg_reg(queue, val | (ne << 26) | (nf << 29));
++}
++
++int queue_set_irq_src(struct qm_queue *queue, int flag)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ u32 reg;
++ int offs, bitoffs;
++
++ /* Q 0-7 are in REG0, 8-15 are in REG1, etc. They occupy 4 bits/Q */
++ offs = queue->id/8 + INT0_SRC_SELREG0;
++ bitoffs = (queue->id % 8)*4;
++
++ reg = *(qmgr->addr + offs) & ~(0xf << bitoffs);
++ *(qmgr->addr + offs) = reg | (flag << bitoffs);
++
++ return 0;
++}
++
++static irqreturn_t irq_qm1(int irq, void *dev_id, struct pt_regs *regs)
++{
++ struct qm_qmgr *qmgr = dev_id;
++ int offs, reg;
++ struct qm_queue *queue;
++
++ reg = *(qmgr->addr + QUE_INT_REG0);
++ while(reg) {
++ /*
++ * count leading zeros. "offs" gets
++ * the amount of leading 0 in "reg"
++ */
++ asm ("clz %0, %1;" : "=r"(offs) : "r"(reg));
++ offs = 31 - offs;
++ reg &= ~(1 << offs);
++ queue = qmgr->queues[offs];
++ if (likely(queue)) {
++ if (likely(queue->irq_cb)) {
++ queue->irq_cb(queue);
++ } else {
++ printk(KERN_ERR "Missing callback for Q %d\n",
++ offs);
++ }
++ } else {
++ printk(KERN_ERR "IRQ for unregistered Q %d\n", offs);
++ }
++ }
++ return IRQ_HANDLED;
++}
++
++struct qm_queue *request_queue(int qid, int len)
++{
++ int ram;
++ struct qm_qmgr *qmgr;
++ struct qm_queue *queue;
++
++ if (!qmgr_dev)
++ return ERR_PTR(-ENODEV);
++
++ if ((qid < 0) || (qid > MAX_QUEUES))
++ return ERR_PTR(-ERANGE);
++
++ switch (len) {
++ case 16:
++ case 32:
++ case 64:
++ case 128: break;
++ default : return ERR_PTR(-EINVAL);
++ }
++
++ qmgr = dev_get_drvdata(qmgr_dev);
++
++ if (qmgr->queues[qid]) {
++ /* not an error, just in use already */
++ return NULL;
++ }
++ if ((ram = get_free_qspace(qmgr, len)) < 0) {
++ printk(KERN_ERR "No free SRAM space for this queue\n");
++ return ERR_PTR(-ENOMEM);
++ }
++ if (!(queue = kzalloc(sizeof(struct qm_queue), GFP_KERNEL)))
++ return ERR_PTR(-ENOMEM);
++
++ if (!try_module_get(THIS_MODULE)) {
++ kfree(queue);
++ return ERR_PTR(-ENODEV);
++ }
++
++ queue->addr = ram;
++ queue->len = len;
++ queue->id = qid;
++ queue->dev = get_device(qmgr_dev);
++ queue->acc_reg = qmgr->addr + (4 * qid);
++ qmgr->queues[qid] = queue;
++ if (request_pool(qmgr_dev, len)) {
++ printk(KERN_ERR "Failed to request DMA pool of Q %d\n", qid);
++ }
++
++ conf_q_regs(queue);
++ return queue;
++}
++
++void release_queue(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++
++ BUG_ON(qmgr->queues[queue->id] != queue);
++ qmgr->queues[queue->id] = NULL;
++
++ if (free_pool(queue->dev, queue->len)) {
++ printk(KERN_ERR "Failed to release DMA pool of Q %d\n",
++ queue->id);
++ }
++ queue_disable_irq(queue);
++ queue_write_cfg_reg(queue, 0);
++
++ module_put(THIS_MODULE);
++ put_device(queue->dev);
++ kfree(queue);
++}
++
++static int qmgr_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ struct qm_qmgr *qmgr;
++ int size, ret=0, i;
++
++ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0)))
++ return -EIO;
++
++ if ((i = platform_get_irq(pdev, 0)) < 0)
++ return -EIO;
++
++ if (!(qmgr = kzalloc(sizeof(struct qm_qmgr), GFP_KERNEL)))
++ return -ENOMEM;
++
++ qmgr->irq = i;
++ size = res->end - res->start +1;
++ qmgr->res = request_mem_region(res->start, size, "ixp_qmgr");
++ if (!qmgr->res) {
++ ret = -EBUSY;
++ goto out_free;
++ }
++
++ qmgr->addr = ioremap(res->start, size);
++ if (!qmgr->addr) {
++ ret = -ENOMEM;
++ goto out_rel;
++ }
++
++ /* Reset Q registers */
++ for (i=0; i<4; i++)
++ *(qmgr->addr + QUE_LOW_STAT0 +i) = 0x33333333;
++ for (i=0; i<10; i++)
++ *(qmgr->addr + QUE_UO_STAT0 +i) = 0x0;
++ for (i=0; i<4; i++)
++ *(qmgr->addr + INT0_SRC_SELREG0 +i) = 0x0;
++ for (i=0; i<2; i++) {
++ *(qmgr->addr + QUE_IE_REG0 +i) = 0x00;
++ *(qmgr->addr + QUE_INT_REG0 +i) = 0xffffffff;
++ }
++ for (i=0; i<64; i++) {
++ *(qmgr->addr + IX_QMGR_QCFG_BASE + i) = 0x0;
++ }
++
++ ret = request_irq(qmgr->irq, irq_qm1, SA_SHIRQ | SA_INTERRUPT,
++ "qmgr", qmgr);
++ if (ret) {
++ printk(KERN_ERR "Failed to request IRQ(%d)\n", qmgr->irq);
++ ret = -EIO;
++ goto out_rel;
++ }
++
++ rwlock_init(&qmgr->lock);
++ qmgr->dmapool = dma_pool_create("qmgr", &pdev->dev,
++ sizeof(struct npe_cont), 32, 0);
++ platform_set_drvdata(pdev, qmgr);
++
++ qmgr_dev = &pdev->dev;
++
++ printk(KERN_INFO IXQMGR_VERSION " initialized.\n");
++
++ return 0;
++
++out_rel:
++ release_resource(qmgr->res);
++out_free:
++ kfree(qmgr);
++ return ret;
++}
++
++static int qmgr_remove(struct platform_device *pdev)
++{
++ struct qm_qmgr *qmgr = platform_get_drvdata(pdev);
++ int i;
++
++ for (i=0; i<MAX_QUEUES; i++) {
++ if (qmgr->queues[i]) {
++ printk(KERN_ERR "WARNING Unreleased Q: %d\n", i);
++ release_queue(qmgr->queues[i]);
++ }
++ }
++
++ synchronize_irq (qmgr->irq);
++ free_irq(qmgr->irq, qmgr);
++
++ dma_pool_destroy(qmgr->dmapool);
++ iounmap(qmgr->addr);
++ release_resource(qmgr->res);
++ platform_set_drvdata(pdev, NULL);
++ qmgr_dev = NULL;
++ kfree(qmgr);
++ return 0;
++}
++
++static struct platform_driver ixp4xx_qmgr = {
++ .driver.name = "ixp4xx_qmgr",
++ .probe = qmgr_probe,
++ .remove = qmgr_remove,
++};
++
++
++static int __init init_qmgr(void)
++{
++ return platform_driver_register(&ixp4xx_qmgr);
++}
++
++static void __exit finish_qmgr(void)
++{
++ platform_driver_unregister(&ixp4xx_qmgr);
++}
++
++module_init(init_qmgr);
++module_exit(finish_qmgr);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
++
++EXPORT_SYMBOL(request_queue);
++EXPORT_SYMBOL(release_queue);
++EXPORT_SYMBOL(queue_set_irq_src);
++EXPORT_SYMBOL(queue_set_watermarks);
++EXPORT_SYMBOL(queue_len);
+diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac.h linux-2.6.17-owrt/drivers/net/ixp4xx/mac.h
+--- linux-2.6.17/drivers/net/ixp4xx/mac.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/drivers/net/ixp4xx/mac.h 2006-10-27 12:48:54.000000000 +0200
+@@ -0,0 +1,221 @@
++/*
++ * Copyright (C) 2002-2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/resource.h>
++#include <linux/netdevice.h>
++#include <linux/io.h>
++#include <linux/mii.h>
++#include <linux/workqueue.h>
++#include <asm/hardware.h>
++#include <linux/ixp_qmgr.h>
++
++
++/* 32 bit offsets to be added to u32 *pointers */
++#define MAC_TX_CNTRL1 0x00 // 0x000
++#define MAC_TX_CNTRL2 0x01 // 0x004
++#define MAC_RX_CNTRL1 0x04 // 0x010
++#define MAC_RX_CNTRL2 0x05 // 0x014
++#define MAC_RANDOM_SEED 0x08 // 0x020
++#define MAC_THRESH_P_EMPTY 0x0c // 0x030
++#define MAC_THRESH_P_FULL 0x0e // 0x038
++#define MAC_BUF_SIZE_TX 0x10 // 0x040
++#define MAC_TX_DEFER 0x14 // 0x050
++#define MAC_RX_DEFER 0x15 // 0x054
++#define MAC_TX_TWO_DEFER_1 0x18 // 0x060
++#define MAC_TX_TWO_DEFER_2 0x19 // 0x064
++#define MAC_SLOT_TIME 0x1c // 0x070
++#define MAC_MDIO_CMD 0x20 // 0x080 4 registers 0x20 - 0x23
++#define MAC_MDIO_STS 0x24 // 0x090 4 registers 0x24 - 0x27
++#define MAC_ADDR_MASK 0x28 // 0x0A0 6 registers 0x28 - 0x2d
++#define MAC_ADDR 0x30 // 0x0C0 6 registers 0x30 - 0x35
++#define MAC_INT_CLK_THRESH 0x38 // 0x0E0 1 register
++#define MAC_UNI_ADDR 0x3c // 0x0F0 6 registers 0x3c - 0x41
++#define MAC_CORE_CNTRL 0x7f // 0x1fC
++
++/* TX Control Register 1*/
++
++#define TX_CNTRL1_TX_EN BIT(0)
++#define TX_CNTRL1_DUPLEX BIT(1)
++#define TX_CNTRL1_RETRY BIT(2)
++#define TX_CNTRL1_PAD_EN BIT(3)
++#define TX_CNTRL1_FCS_EN BIT(4)
++#define TX_CNTRL1_2DEFER BIT(5)
++#define TX_CNTRL1_RMII BIT(6)
++
++/* TX Control Register 2 */
++#define TX_CNTRL2_RETRIES_MASK 0xf
++
++/* RX Control Register 1 */
++#define RX_CNTRL1_RX_EN BIT(0)
++#define RX_CNTRL1_PADSTRIP_EN BIT(1)
++#define RX_CNTRL1_CRC_EN BIT(2)
++#define RX_CNTRL1_PAUSE_EN BIT(3)
++#define RX_CNTRL1_LOOP_EN BIT(4)
++#define RX_CNTRL1_ADDR_FLTR_EN BIT(5)
++#define RX_CNTRL1_RX_RUNT_EN BIT(6)
++#define RX_CNTRL1_BCAST_DIS BIT(7)
++
++/* RX Control Register 2 */
++#define RX_CNTRL2_DEFER_EN BIT(0)
++
++/* Core Control Register */
++#define CORE_RESET BIT(0)
++#define CORE_RX_FIFO_FLUSH BIT(1)
++#define CORE_TX_FIFO_FLUSH BIT(2)
++#define CORE_SEND_JAM BIT(3)
++#define CORE_MDC_EN BIT(4)
++
++/* Definitions for MII access routines*/
++
++#define MII_REG_SHL 16
++#define MII_ADDR_SHL 21
++
++#define MII_GO BIT(31)
++#define MII_WRITE BIT(26)
++#define MII_READ_FAIL BIT(31)
++
++#define MII_TIMEOUT_10TH_SECS 5
++#define MII_10TH_SEC_IN_MILLIS 100
++
++/*
++ *
++ * Default values
++ *
++ */
++
++
++#define MAC_TX_CNTRL1_DEFAULT (\
++ TX_CNTRL1_TX_EN | \
++ TX_CNTRL1_RETRY | \
++ TX_CNTRL1_FCS_EN | \
++ TX_CNTRL1_2DEFER | \
++ TX_CNTRL1_PAD_EN )
++
++#define MAC_TX_MAX_RETRIES_DEFAULT 0x0f
++
++#define MAC_RX_CNTRL1_DEFAULT ( \
++ RX_CNTRL1_PADSTRIP_EN | \
++ RX_CNTRL1_CRC_EN | \
++ RX_CNTRL1_RX_EN )
++
++#define MAC_RX_CNTRL2_DEFAULT 0x0
++#define MAC_TX_CNTRL2_DEFAULT TX_CNTRL2_RETRIES_MASK
++
++/* Thresholds determined by NPE firmware FS */
++#define MAC_THRESH_P_EMPTY_DEFAULT 0x12
++#define MAC_THRESH_P_FULL_DEFAULT 0x30
++
++/* Number of bytes that must be in the tx fifo before
++ * transmission commences */
++#define MAC_BUF_SIZE_TX_DEFAULT 0x8
++
++/* One-part deferral values */
++#define MAC_TX_DEFER_DEFAULT 0x15
++#define MAC_RX_DEFER_DEFAULT 0x16
++
++/* Two-part deferral values... */
++#define MAC_TX_TWO_DEFER_1_DEFAULT 0x08
++#define MAC_TX_TWO_DEFER_2_DEFAULT 0x07
++
++/* This value applies to MII */
++#define MAC_SLOT_TIME_DEFAULT 0x80
++
++/* This value applies to RMII */
++#define MAC_SLOT_TIME_RMII_DEFAULT 0xFF
++
++#define MAC_ADDR_MASK_DEFAULT 0xFF
++
++#define MAC_INT_CLK_THRESH_DEFAULT 0x1
++/* The following is a value chosen at random */
++#define RANDOM_SEED_DEFAULT 0x8
++
++/* By default we must configure the MAC to generate the MDC clock*/
++#define CORE_DEFAULT (CORE_MDC_EN)
++
++/* End of Intel provided register information */
++
++extern int
++mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg);
++extern void
++mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val);
++extern void init_mdio(struct net_device *dev, int phy_id);
++
++struct mac_info {
++ u32 __iomem *addr;
++ struct resource *res;
++ struct device *npe_dev;
++ struct qm_qmgr *qmgr;
++ struct qm_queue *rxq;
++ struct qm_queue *txq;
++ u32 irqflags;
++ struct net_device_stats stat;
++ struct mii_if_info mii;
++ struct work_struct mdio_thread;
++ int rxq_pkt;
++ int unloading;
++ struct mac_plat_info *plat;
++};
++
++static inline void mac_write_reg(struct mac_info *mac, int offset, u32 val)
++{
++ *(mac->addr + offset) = val;
++}
++static inline u32 mac_read_reg(struct mac_info *mac, int offset)
++{
++ return *(mac->addr + offset);
++}
++static inline void mac_set_regbit(struct mac_info *mac, int offset, u32 bit)
++{
++ mac_write_reg(mac, offset, mac_read_reg(mac, offset) | bit);
++}
++static inline void mac_reset_regbit(struct mac_info *mac, int offset, u32 bit)
++{
++ mac_write_reg(mac, offset, mac_read_reg(mac, offset) & ~bit);
++}
++
++static inline void mac_mdio_cmd_write(struct mac_info *mac, u32 cmd)
++{
++ int i;
++ for(i=0; i<4; i++) {
++ mac_write_reg(mac, MAC_MDIO_CMD + i, cmd & 0xff);
++ cmd >>=8;
++ }
++}
++
++#define mac_mdio_cmd_read(mac) mac_mdio_read((mac), MAC_MDIO_CMD)
++#define mac_mdio_status_read(mac) mac_mdio_read((mac), MAC_MDIO_STS)
++static inline u32 mac_mdio_read(struct mac_info *mac, int offset)
++{
++ int i;
++ u32 data = 0;
++ for(i=0; i<4; i++) {
++ data |= (mac_read_reg(mac, offset + i) & 0xff) << (i*8);
++ }
++ return data;
++}
++
++static inline u32 mdio_cmd(int phy_addr, int phy_reg)
++{
++ return phy_addr << MII_ADDR_SHL |
++ phy_reg << MII_REG_SHL |
++ MII_GO;
++}
++
++#define MAC_REG_LIST { \
++ MAC_TX_CNTRL1, MAC_TX_CNTRL2, \
++ MAC_RX_CNTRL1, MAC_RX_CNTRL2, \
++ MAC_RANDOM_SEED, MAC_THRESH_P_EMPTY, MAC_THRESH_P_FULL, \
++ MAC_BUF_SIZE_TX, MAC_TX_DEFER, MAC_RX_DEFER, \
++ MAC_TX_TWO_DEFER_1, MAC_TX_TWO_DEFER_2, MAC_SLOT_TIME, \
++ MAC_ADDR_MASK +0, MAC_ADDR_MASK +1, MAC_ADDR_MASK +2, \
++ MAC_ADDR_MASK +3, MAC_ADDR_MASK +4, MAC_ADDR_MASK +5, \
++ MAC_ADDR +0, MAC_ADDR +1, MAC_ADDR +2, \
++ MAC_ADDR +3, MAC_ADDR +4, MAC_ADDR +5, \
++ MAC_INT_CLK_THRESH, \
++ MAC_UNI_ADDR +0, MAC_UNI_ADDR +1, MAC_UNI_ADDR +2, \
++ MAC_UNI_ADDR +3, MAC_UNI_ADDR +4, MAC_UNI_ADDR +5, \
++ MAC_CORE_CNTRL \
++}
+diff -Nur linux-2.6.17/drivers/net/ixp4xx/mac_driver.c linux-2.6.17-owrt/drivers/net/ixp4xx/mac_driver.c
+--- linux-2.6.17/drivers/net/ixp4xx/mac_driver.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/drivers/net/ixp4xx/mac_driver.c 2006-10-27 12:48:54.000000000 +0200
+@@ -0,0 +1,578 @@
++/*
++ * mac_driver.c - provide a network interface for each MAC
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/platform_device.h>
++#include <linux/netdevice.h>
++#include <linux/etherdevice.h>
++#include <linux/ethtool.h>
++#include <linux/slab.h>
++#include <linux/delay.h>
++#include <linux/err.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++
++
++#include <linux/ixp_qmgr.h>
++#include <linux/ixp_npe.h>
++#include "mac.h"
++
++#define MDIO_INTERVAL (3*HZ)
++#define RX_QUEUE_PREFILL 64
++
++#define IXMAC_NAME "ixp4xx_mac"
++#define IXMAC_VERSION "0.2.1"
++
++#define MAC_DEFAULT_REG(mac, name) \
++ mac_write_reg(mac, MAC_ ## name, MAC_ ## name ## _DEFAULT)
++
++#define RX_DONE_QID 4
++#define TX_DONE_QID 31
++
++extern int queue_send_skb(struct qm_queue *queue, struct sk_buff *skb);
++extern int queue_fill_skb(struct qm_queue *queue, struct net_device *dev);
++extern int queue_drain(struct qm_queue *queue);
++extern struct sk_buff *queue_return_skb(struct qm_queue *queue);
++
++
++/* Since the NPEs use 1 Return Q for sent frames, we need a device
++ * independent return Q. We call it tx_doneq.
++ * It will be initialized during module load and uninitialized
++ * during module unload. Evil hack, but there is no choice :-(
++ */
++
++static struct qm_queue *tx_doneq = NULL;
++static struct qm_queue *rx_doneq = NULL;
++
++static void mac_init(struct mac_info *mac)
++{
++ MAC_DEFAULT_REG(mac, TX_CNTRL2);
++ MAC_DEFAULT_REG(mac, THRESH_P_EMPTY);
++ MAC_DEFAULT_REG(mac, THRESH_P_FULL);
++ MAC_DEFAULT_REG(mac, TX_DEFER);
++ MAC_DEFAULT_REG(mac, TX_TWO_DEFER_1);
++ MAC_DEFAULT_REG(mac, TX_TWO_DEFER_2);
++ MAC_DEFAULT_REG(mac, SLOT_TIME);
++ MAC_DEFAULT_REG(mac, INT_CLK_THRESH);
++ MAC_DEFAULT_REG(mac, BUF_SIZE_TX);
++ MAC_DEFAULT_REG(mac, TX_CNTRL1);
++ MAC_DEFAULT_REG(mac, RX_CNTRL1);
++}
++
++static void mac_set_uniaddr(struct net_device *dev)
++{
++ int i;
++ struct mac_info *mac = netdev_priv(dev);
++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
++
++ /* check for multicast */
++ if (dev->dev_addr[0] & 1)
++ return;
++
++ npe_mh_setportaddr(npe, mac->plat, dev->dev_addr);
++ npe_mh_disable_firewall(npe, mac->plat);
++ for (i=0; i<dev->addr_len; i++)
++ mac_write_reg(mac, MAC_UNI_ADDR + i, dev->dev_addr[i]);
++}
++
++static void update_duplex_mode(struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ printk("Duplex mode %s =%d\n", dev->name, mac->mii.full_duplex);
++ if (mac->mii.full_duplex) {
++ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_DUPLEX);
++ } else {
++ mac_set_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_DUPLEX);
++ }
++}
++
++static int media_check(struct net_device *dev, int init)
++{
++ struct mac_info *mac = netdev_priv(dev);
++
++ if (mii_check_media(&mac->mii, 1, init)) {
++ update_duplex_mode(dev);
++ return 1;
++ }
++ return 0;
++}
++
++static void irqcb_recv(struct qm_queue *queue)
++{
++ struct net_device *dev;
++ struct mac_info *mac;
++ struct sk_buff *skb;
++
++ queue_ack_irq(queue);
++ skb = queue_return_skb(queue);
++ while (skb) {
++ int rc;
++ dev = skb->dev;
++ mac = netdev_priv(dev);
++ skb->protocol = eth_type_trans(skb, dev);
++ dev->last_rx = jiffies;
++ rc = netif_rx(skb);
++ if (rc == NET_RX_DROP) {
++ mac->stat.rx_dropped++;
++ } else {
++ mac->stat.rx_packets++;
++ mac->stat.rx_bytes += skb->len;
++ }
++
++ if (!mac->unloading)
++ queue_fill_skb(mac->rxq, dev);
++ else
++ mac->rxq_pkt--;
++
++ skb = queue_return_skb(queue);
++ }
++}
++
++void irqcb_txdone(struct qm_queue *queue)
++{
++ queue_ack_irq(queue);
++ while (queue_drain(queue));
++}
++
++static void ixmac_set_rx_mode (struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ struct dev_mc_list *mclist;
++ u8 aset[dev->addr_len], aclear[dev->addr_len];
++ int i,j;
++
++ if (dev->flags & IFF_PROMISC) {
++ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_ADDR_FLTR_EN);
++ } else {
++ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_ADDR_FLTR_EN);
++
++ mclist = dev->mc_list;
++ memset(aset, 0xff, dev->addr_len);
++ memset(aclear, 0x00, dev->addr_len);
++ for (i = 0; mclist && i < dev->mc_count; i++) {
++ for (j=0; j< dev->addr_len; j++) {
++ aset[j] &= mclist->dmi_addr[j];
++ aclear[j] |= mclist->dmi_addr[j];
++ }
++ mclist = mclist->next;
++ }
++ for (j=0; j< dev->addr_len; j++) {
++ aclear[j] = aset[j] | ~aclear[j];
++ }
++ for (i=0; i<dev->addr_len; i++) {
++ mac_write_reg(mac, MAC_ADDR + i, aset[i]);
++ mac_write_reg(mac, MAC_ADDR_MASK + i, aclear[i]);
++ }
++ }
++}
++
++static int ixmac_open (struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
++ int i;
++
++ /* first check if Microcode was downloaded into this NPE */
++ if (!( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN)) {
++ printk(KERN_ERR "Missing microcode for %s\n", npe->plat->name);
++ return -EIO;
++ }
++
++ for (i=0; i<RX_QUEUE_PREFILL; i++) {
++ queue_fill_skb(mac->rxq, dev);
++ }
++ mac->rxq_pkt += RX_QUEUE_PREFILL;
++
++ mac_init(mac);
++ npe_mh_set_rxqid(npe, mac->plat, RX_DONE_QID);
++ mac_set_uniaddr(dev);
++
++ media_check(dev, 1);
++
++ ixmac_set_rx_mode(dev);
++
++ netif_start_queue(dev);
++ schedule_delayed_work(&mac->mdio_thread, MDIO_INTERVAL);
++ return 0;
++}
++
++static int ixmac_start_xmit (struct sk_buff *skb, struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++
++ if (queue_send_skb(mac->txq, skb)) {
++ mac->stat.tx_packets++;
++ mac->stat.tx_bytes += skb->len;
++ } else {
++ mac->stat.tx_errors++;
++ dev_kfree_skb(skb);
++ }
++
++ dev->trans_start = jiffies;
++ return 0;
++}
++
++static int ixmac_close (struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++
++ netif_stop_queue (dev);
++
++ if (mac->mdio_thread.pending)
++ cancel_rearming_delayed_work(&mac->mdio_thread);
++
++
++ /* After doing all our business, the rxfreeq must
++ * carry as much packets as we gave it during setup.
++ * Here we calc the missing packets.
++ */
++ mac->rxq_pkt -= queue_len(mac->rxq);
++
++ while (queue_drain(mac->txq));
++ while (queue_drain(mac->rxq));
++
++ return 0;
++}
++
++static int ixmac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ int rc, duplex_changed;
++
++ if (!netif_running(dev))
++ return -EINVAL;
++
++
++ if (!try_module_get(THIS_MODULE))
++ return -ENODEV;
++ rc = generic_mii_ioctl(&mac->mii, if_mii(rq), cmd, &duplex_changed);
++ module_put(THIS_MODULE);
++ if (duplex_changed)
++ update_duplex_mode(dev);
++ return rc;
++}
++
++static struct net_device_stats *ixmac_stats (struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ return &mac->stat;
++}
++
++static void ixmac_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
++
++ strcpy(info->driver, IXMAC_NAME);
++ strcpy(info->version, IXMAC_VERSION);
++ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
++ snprintf(info->fw_version, 32, "%d.%d func [%d]",
++ npe->img_info[2], npe->img_info[3], npe->img_info[1]);
++ }
++ strncpy(info->bus_info, npe->plat->name, ETHTOOL_BUSINFO_LEN);
++}
++
++static int ixmac_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ mii_ethtool_gset(&mac->mii, cmd);
++ return 0;
++}
++
++static int ixmac_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ int rc;
++ rc = mii_ethtool_sset(&mac->mii, cmd);
++ return rc;
++}
++
++static int ixmac_nway_reset(struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ return mii_nway_restart(&mac->mii);
++}
++
++static u32 ixmac_get_link(struct net_device *dev)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ return mii_link_ok(&mac->mii);
++}
++
++static const int mac_reg_list[] = MAC_REG_LIST;
++
++static int ixmac_get_regs_len(struct net_device *dev)
++{
++ return ARRAY_SIZE(mac_reg_list);
++}
++
++static void
++ixmac_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *regbuf)
++{
++ int i;
++ struct mac_info *mac = netdev_priv(dev);
++ u8 *buf = regbuf;
++
++ for (i=0; i<regs->len; i++) {
++ buf[i] = mac_read_reg(mac, mac_reg_list[i]);
++ }
++}
++
++static struct ethtool_ops ixmac_ethtool_ops = {
++ .get_drvinfo = ixmac_get_drvinfo,
++ .get_settings = ixmac_get_settings,
++ .set_settings = ixmac_set_settings,
++ .nway_reset = ixmac_nway_reset,
++ .get_link = ixmac_get_link,
++ .get_regs_len = ixmac_get_regs_len,
++ .get_regs = ixmac_get_regs,
++ .get_perm_addr = ethtool_op_get_perm_addr,
++};
++static void mac_mdio_thread (void *_data)
++{
++ struct net_device *dev = _data;
++ struct mac_info *mac = netdev_priv(dev);
++
++ media_check(dev, 0);
++ schedule_delayed_work(&mac->mdio_thread, MDIO_INTERVAL);
++}
++
++static int mac_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ struct mac_info *mac;
++ struct net_device* dev;
++ struct npe_info *npe;
++ struct mac_plat_info *plat = pdev->dev.platform_data;
++ int size, ret;
++
++ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0))) {
++ return -EIO;
++ }
++ if (!(dev = alloc_etherdev (sizeof(struct mac_info)))) {
++ return -ENOMEM;
++ }
++ SET_MODULE_OWNER(dev);
++ SET_NETDEV_DEV(dev, &pdev->dev);
++ mac = netdev_priv(dev);
++
++ size = res->end - res->start +1;
++ mac->res = request_mem_region(res->start, size, IXMAC_NAME);
++ if (!mac->res) {
++ ret = -EBUSY;
++ goto out_free;
++ }
++
++ mac->addr = ioremap(res->start, size);
++ if (!mac->addr) {
++ ret = -ENOMEM;
++ goto out_rel;
++ }
++
++ dev->open = ixmac_open;
++ dev->hard_start_xmit = ixmac_start_xmit;
++ dev->stop = ixmac_close;
++ dev->get_stats = ixmac_stats;
++ dev->do_ioctl = ixmac_ioctl;
++ dev->set_multicast_list = ixmac_set_rx_mode;
++ dev->ethtool_ops = &ixmac_ethtool_ops;
++
++ mac->npe_dev = get_npe_by_id(plat->npe_id);
++ if (!mac->npe_dev) {
++ ret = -EIO;
++ goto out_unmap;
++ }
++ if (!try_module_get(mac->npe_dev->driver->owner)) {
++ put_device(mac->npe_dev);
++ ret = -EIO;
++ goto out_unmap;
++ }
++
++ npe = dev_get_drvdata(mac->npe_dev);
++
++ mac->rxq = request_queue(plat->rxq_id, 128);
++ if (IS_ERR(mac->rxq)) {
++ printk(KERN_ERR "Error requesting Q: %d\n", plat->rxq_id);
++ ret = -EBUSY;
++ goto out_putmod;
++ }
++ mac->txq = request_queue(plat->txq_id, 128);
++ if (IS_ERR(mac->txq)) {
++ printk(KERN_ERR "Error requesting Q: %d\n", plat->txq_id);
++ release_queue(mac->rxq);
++ ret = -EBUSY;
++ goto out_putmod;
++ }
++
++ mac->qmgr = dev_get_drvdata(mac->rxq->dev);
++ if (register_netdev (dev)) {
++ release_queue(mac->rxq);
++ release_queue(mac->txq);
++ ret = -EIO;
++ goto out_putmod;
++ }
++
++ mac->plat = plat;
++ platform_set_drvdata(pdev, dev);
++
++ mac_write_reg(mac, MAC_CORE_CNTRL, CORE_RESET);
++ udelay(500);
++ mac_write_reg(mac, MAC_CORE_CNTRL, CORE_MDC_EN);
++
++ init_mdio(dev, plat->phy_id);
++
++ INIT_WORK(&mac->mdio_thread, mac_mdio_thread, dev);
++
++ /* The place of the MAC address is very system dependent.
++ * Here we use a random one to be replaced by one of the
++ * following commands:
++ * "ip link set address 02:03:04:04:04:01 dev eth0"
++ * "ifconfig eth0 hw ether 02:03:04:04:04:07"
++ */
++ random_ether_addr(dev->dev_addr);
++ dev->dev_addr[5] = plat->phy_id;
++
++ printk(KERN_INFO IXMAC_NAME " driver " IXMAC_VERSION
++ ": %s on %s with PHY[%d] initialized\n",
++ dev->name, npe->plat->name, plat->phy_id);
++
++ return 0;
++
++out_putmod:
++ module_put(mac->npe_dev->driver->owner);
++out_unmap:
++ iounmap(mac->addr);
++out_rel:
++ release_resource(mac->res);
++out_free:
++ kfree(mac);
++ return ret;
++}
++
++static int mac_remove(struct platform_device *pdev)
++{
++ struct net_device* dev = platform_get_drvdata(pdev);
++ struct mac_info *mac = netdev_priv(dev);
++ struct npe_info *npe = dev_get_drvdata(mac->npe_dev);
++ int loop = 0;
++ struct sk_buff *skb;
++
++ ixmac_close(dev);
++
++ mac->unloading = 1;
++
++ /* Now there are some skb hold by the NPE.
++ * We switch the MAC in loopback mode and send a pseudo packet
++ * that will be returned by the NPE in its last SKB.
++ * We will also try to isolate the PHY to keep the packets internal.
++ */
++
++ if (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
++ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_MDC_EN);
++ mac_set_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN);
++
++ npe_mh_npe_loopback_mode(npe, mac->plat, 1);
++ mdelay(200);
++
++ while (mac->rxq_pkt && loop++ < 2000 ) {
++ skb = dev_alloc_skb(128);
++ skb_put(skb, 64);
++ /* actually the packets should never leave the system,
++ * but if they do, they shall contain 0s instead of
++ * intresting random data....
++ */
++ memset(skb->data, 0, skb->len);
++ queue_send_skb(mac->txq, skb);
++
++ mdelay(1);
++ }
++
++ npe_mh_npe_loopback_mode(npe, mac->plat, 0);
++ }
++ /* Flush MAC TX fifo to drain the bogus packages */
++ mac_set_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
++ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_RX_EN);
++ mac_reset_regbit(mac, MAC_TX_CNTRL1, TX_CNTRL1_TX_EN);
++ mac_reset_regbit(mac, MAC_RX_CNTRL1, RX_CNTRL1_LOOP_EN);
++ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
++ mac_reset_regbit(mac, MAC_CORE_CNTRL, CORE_TX_FIFO_FLUSH);
++
++ unregister_netdev(dev);
++
++ while (queue_drain(mac->txq));
++ release_queue(mac->txq);
++ while (queue_drain(mac->rxq));
++ release_queue(mac->rxq);
++
++ module_put(mac->npe_dev->driver->owner);
++ put_device(mac->npe_dev);
++
++ iounmap(mac->addr);
++ release_resource(mac->res);
++ platform_set_drvdata(pdev, NULL);
++ free_netdev(dev);
++ return 0;
++}
++
++static struct platform_driver ixp4xx_mac = {
++ .driver.name = IXMAC_NAME,
++ .probe = mac_probe,
++ .remove = mac_remove,
++};
++
++static int __init init_mac(void)
++{
++ /* The TX done Queue handles skbs sent out by the NPE */
++ tx_doneq = request_queue(TX_DONE_QID, 128);
++ if (IS_ERR(tx_doneq)) {
++ printk(KERN_ERR "Error requesting Q: %d\n", TX_DONE_QID);
++ return -EBUSY;
++ }
++ tx_doneq->irq_cb = irqcb_txdone;
++ /* drain the TX queue if it is half full */
++ queue_set_watermarks(tx_doneq, 0, 64);
++ queue_set_irq_src(tx_doneq, Q_IRQ_ID_NF);
++ queue_enable_irq(tx_doneq);
++
++ /* RX Queue handles SKBs with a valid frame */
++ rx_doneq = request_queue(RX_DONE_QID, 128);
++ if (IS_ERR(rx_doneq)) {
++ printk(KERN_ERR "Error requesting Q: %d\n", RX_DONE_QID);
++ return -EBUSY;
++ }
++ irqcb_recv(rx_doneq);
++ rx_doneq->irq_cb = irqcb_recv;
++ queue_set_watermarks(rx_doneq, 0, 0);
++ queue_set_irq_src(rx_doneq, Q_IRQ_ID_NOT_E);
++ queue_enable_irq(rx_doneq);
++
++ return platform_driver_register(&ixp4xx_mac);
++}
++
++static void __exit finish_mac(void)
++{
++ platform_driver_unregister(&ixp4xx_mac);
++ if (tx_doneq) {
++ queue_disable_irq(tx_doneq);
++ while (queue_drain(tx_doneq));
++ release_queue(tx_doneq);
++ }
++ if (rx_doneq) {
++ queue_disable_irq(rx_doneq);
++ while (queue_drain(rx_doneq));
++ release_queue(rx_doneq);
++ }
++}
++
++module_init(init_mac);
++module_exit(finish_mac);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
++
+diff -Nur linux-2.6.17/drivers/net/ixp4xx/npe_mh.c linux-2.6.17-owrt/drivers/net/ixp4xx/npe_mh.c
+--- linux-2.6.17/drivers/net/ixp4xx/npe_mh.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/drivers/net/ixp4xx/npe_mh.c 2006-10-27 12:48:54.000000000 +0200
+@@ -0,0 +1,137 @@
++/*
++ * npe_mh.c - NPE message handler.
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/ixp_npe.h>
++#include <linux/slab.h>
++
++#define MAX_RETRY 200
++
++struct npe_mh_msg {
++ union {
++ u8 byte[8]; /* Very desciptive name, I know ... */
++ u32 data[2];
++ } u;
++};
++
++/*
++ * The whole code in this function must be reworked.
++ * It is in a state that works but is not rock solid
++ */
++static int send_message(struct npe_info *npe, struct npe_mh_msg *msg)
++{
++ int i,j;
++ u32 send[2], recv[2];
++
++ for (i=0; i<2; i++)
++ send[i] = be32_to_cpu(msg->u.data[i]);
++
++ if ((npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) &
++ IX_NPEMH_NPE_STAT_IFNE))
++ return -1;
++
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_FIFO, send[0]);
++ for(i=0; i<MAX_RETRY; i++) {
++ /* if the IFNF status bit is unset then the inFIFO is full */
++ if (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) &
++ IX_NPEMH_NPE_STAT_IFNF)
++ break;
++ }
++ if (i>=MAX_RETRY)
++ return -1;
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_FIFO, send[1]);
++ i=0;
++ while (!(npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) &
++ IX_NPEMH_NPE_STAT_OFNE)) {
++ if (i++>MAX_RETRY) {
++ printk("Waiting for Output FIFO NotEmpty failed\n");
++ return -1;
++ }
++ }
++ //printk("Output FIFO Not Empty. Loops: %d\n", i);
++ j=0;
++ while (npe_reg_read(npe, IX_NPEDL_REG_OFFSET_STAT) &
++ IX_NPEMH_NPE_STAT_OFNE) {
++ recv[j&1] = npe_reg_read(npe,IX_NPEDL_REG_OFFSET_FIFO);
++ j++;
++ }
++ if ((recv[0] != send[0]) || (recv[1] != send[1])) {
++ printk("Unexpected answer: Send %08x:%08x Ret %08x:%08x\n",
++ send[0], send[1], recv[0], recv[1]);
++ }
++ return 0;
++}
++
++#define CMD 0
++#define PORT 1
++#define MAC 2
++
++#define IX_ETHNPE_EDB_SETPORTADDRESS 0x01
++#define IX_ETHNPE_FW_SETFIREWALLMODE 0x0E
++#define IX_ETHNPE_VLAN_SETRXQOSENTRY 0x0B
++#define IX_ETHNPE_SETLOOPBACK_MODE 0x12
++
++#define logical_id(mp) (((mp)->npe_id << 4) | ((mp)->port_id & 0xf))
++
++int npe_mh_setportaddr(struct npe_info *npe, struct mac_plat_info *mp,
++ u8 *macaddr)
++{
++ struct npe_mh_msg msg;
++
++ msg.u.byte[CMD] = IX_ETHNPE_EDB_SETPORTADDRESS;
++ msg.u.byte[PORT] = mp->eth_id;
++ memcpy(msg.u.byte + MAC, macaddr, 6);
++
++ return send_message(npe, &msg);
++}
++
++int npe_mh_disable_firewall(struct npe_info *npe, struct mac_plat_info *mp)
++{
++ struct npe_mh_msg msg;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.u.byte[CMD] = IX_ETHNPE_FW_SETFIREWALLMODE;
++ msg.u.byte[PORT] = logical_id(mp);
++
++ return send_message(npe, &msg);
++}
++
++int npe_mh_npe_loopback_mode(struct npe_info *npe, struct mac_plat_info *mp,
++ int enable)
++{
++ struct npe_mh_msg msg;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.u.byte[CMD] = IX_ETHNPE_SETLOOPBACK_MODE;
++ msg.u.byte[PORT] = logical_id(mp);
++ msg.u.byte[3] = enable ? 1 : 0;
++
++ return send_message(npe, &msg);
++}
++
++int npe_mh_set_rxqid(struct npe_info *npe, struct mac_plat_info *mp, int qid)
++{
++ struct npe_mh_msg msg;
++ int i, ret;
++
++ memset(&msg, 0, sizeof(msg));
++ msg.u.byte[CMD] = IX_ETHNPE_VLAN_SETRXQOSENTRY;
++ msg.u.byte[PORT] = logical_id(mp);
++ msg.u.byte[5] = qid | 0x80;
++ msg.u.byte[7] = qid<<4;
++ for(i=0; i<8; i++) {
++ msg.u.byte[3] = i;
++ if ((ret = send_message(npe, &msg)))
++ return ret;
++ }
++ return 0;
++}
++
++EXPORT_SYMBOL(npe_mh_setportaddr);
++EXPORT_SYMBOL(npe_mh_disable_firewall);
++EXPORT_SYMBOL(npe_mh_set_rxqid);
++EXPORT_SYMBOL(npe_mh_npe_loopback_mode);
+diff -Nur linux-2.6.17/drivers/net/ixp4xx/phy.c linux-2.6.17-owrt/drivers/net/ixp4xx/phy.c
+--- linux-2.6.17/drivers/net/ixp4xx/phy.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/drivers/net/ixp4xx/phy.c 2006-10-27 12:48:54.000000000 +0200
+@@ -0,0 +1,113 @@
++/*
++ * phy.c - MDIO functions and mii initialisation
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++
++#include <linux/mutex.h>
++#include "mac.h"
++
++#define MAX_PHYS (1<<5)
++
++/*
++ * We must always use the same MAC for acessing the MDIO
++ * We may not use each MAC for its PHY :-(
++ */
++
++static struct net_device *phy_dev = NULL;
++static struct mutex mtx;
++
++/* here we remember if the PHY is alive, to avoid log dumping */
++static int phy_works[MAX_PHYS];
++
++int mdio_read_register(struct net_device *dev, int phy_addr, int phy_reg)
++{
++ struct mac_info *mac;
++ u32 cmd, reg;
++ int cnt = 0;
++
++ if (!phy_dev)
++ return 0;
++
++ mac = netdev_priv(phy_dev);
++ cmd = mdio_cmd(phy_addr, phy_reg);
++ mutex_lock_interruptible(&mtx);
++ mac_mdio_cmd_write(mac, cmd);
++ while((cmd = mac_mdio_cmd_read(mac)) & MII_GO) {
++ if (++cnt >= 100) {
++ printk("%s: PHY[%d] access failed\n",
++ dev->name, phy_addr);
++ break;
++ }
++ schedule();
++ }
++ reg = mac_mdio_status_read(mac);
++ mutex_unlock(&mtx);
++ if (reg & MII_READ_FAIL) {
++ if (phy_works[phy_addr]) {
++ printk("%s: PHY[%d] unresponsive\n",
++ dev->name, phy_addr);
++ }
++ reg = 0;
++ phy_works[phy_addr] = 0;
++ } else {
++ if ( !phy_works[phy_addr]) {
++ printk("%s: PHY[%d] responsive again\n",
++ dev->name, phy_addr);
++ }
++ phy_works[phy_addr] = 1;
++ }
++ return reg & 0xffff;
++}
++
++void
++mdio_write_register(struct net_device *dev, int phy_addr, int phy_reg, int val)
++{
++ struct mac_info *mac;
++ u32 cmd;
++ int cnt=0;
++
++ if (!phy_dev)
++ return;
++
++ mac = netdev_priv(phy_dev);
++ cmd = mdio_cmd(phy_addr, phy_reg) | MII_WRITE | val;
++
++ mutex_lock_interruptible(&mtx);
++ mac_mdio_cmd_write(mac, cmd);
++ while((cmd = mac_mdio_cmd_read(mac)) & MII_GO) {
++ if (++cnt >= 100) {
++ printk("%s: PHY[%d] access failed\n",
++ dev->name, phy_addr);
++ break;
++ }
++ schedule();
++ }
++ mutex_unlock(&mtx);
++}
++
++void init_mdio(struct net_device *dev, int phy_id)
++{
++ struct mac_info *mac = netdev_priv(dev);
++ int i;
++
++ /* All phy operations should use the same MAC
++ * (my experience)
++ */
++ if (mac->plat->eth_id == 0) {
++ mutex_init(&mtx);
++ phy_dev = dev;
++ for (i=0; i<MAX_PHYS; i++)
++ phy_works[i] = 1;
++ }
++ mac->mii.dev = dev;
++ mac->mii.phy_id = phy_id;
++ mac->mii.phy_id_mask = MAX_PHYS - 1;
++ mac->mii.reg_num_mask = 0x1f;
++ mac->mii.mdio_read = mdio_read_register;
++ mac->mii.mdio_write = mdio_write_register;
++}
++
+diff -Nur linux-2.6.17/drivers/net/ixp4xx/qmgr_eth.c linux-2.6.17-owrt/drivers/net/ixp4xx/qmgr_eth.c
+--- linux-2.6.17/drivers/net/ixp4xx/qmgr_eth.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/drivers/net/ixp4xx/qmgr_eth.c 2006-10-27 12:48:54.000000000 +0200
+@@ -0,0 +1,127 @@
++/*
++ * qmgr_eth.c - Glue between qmgr and MAC. Linked to mac to keep qmgr.ko
++ * more virtual
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/skbuff.h>
++#include <linux/dma-mapping.h>
++#include <linux/netdevice.h>
++#include <linux/ixp_qmgr.h>
++
++#define SKB_SIZE 1688
++
++int queue_send_skb(struct qm_queue *queue, struct sk_buff *skb)
++{
++ struct npe_cont *cont;
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++
++ cont = qmgr_get_cont(qmgr);
++ if (!cont)
++ return 0;
++
++ cont->h.skb = skb;
++#ifndef __ARMEB__
++ /* swap the payload of the SKB */
++ {
++ u32 *p = (u32*)((unsigned)skb->data & ~0x3);
++ u32 *e = (u32*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
++ while (p < e)
++ *p = cpu_to_be32(*p), ++p;
++ }
++#endif
++ /* fill the NPE information record */
++ cont->ctl.eth.next = 0;
++ cont->ctl.eth.buf_len = skb->end - skb->head;
++ cont->ctl.eth.pkt_len = skb->len;
++ cont->ctl.eth.phys_addr =
++ dma_map_single(queue->dev, skb->data, skb->len, DMA_TO_DEVICE);
++
++ queue_put_entry(queue, cont->phys);
++
++ if (queue_stat(queue) == 2) { /* overflow */
++ return 0;
++ }
++ return 1;
++}
++
++int queue_fill_skb(struct qm_queue *queue, struct net_device *dev)
++{
++ struct npe_cont *cont;
++ struct sk_buff *skb;
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ int len;
++
++ cont = qmgr_get_cont(qmgr);
++ if (!cont)
++ return 0;
++ skb = dev_alloc_skb(SKB_SIZE);
++ if (!skb) {
++ qmgr_return_cont(qmgr, cont);
++ return 0;
++ }
++ len = skb->end - skb->data;
++ skb->dev = dev;
++ cont->h.skb = skb;
++ cont->ctl.eth.next = 0;
++ cont->ctl.eth.buf_len = len;
++ cont->ctl.eth.pkt_len = 0;
++ cont->ctl.eth.phys_addr =
++ dma_map_single(queue->dev, skb->data, len, DMA_FROM_DEVICE);
++
++ queue_put_entry(queue, cont->phys);
++
++ /* TODO: check quelen ?
++ * The current use guarantees that this queues will never overflow.
++ */
++ return 1;
++}
++
++int queue_drain(struct qm_queue *queue)
++{
++ u32 phys = *queue->acc_reg & ~0xf;
++ struct npe_cont *cont;
++
++ if (!phys)
++ return 0;
++ cont = dma_to_virt(queue->dev, phys);
++ cont = cont->virt;
++ dev_kfree_skb_any(cont->h.skb);
++ qmgr_return_cont(dev_get_drvdata(queue->dev), cont);
++ return 1;
++}
++
++struct sk_buff *queue_return_skb(struct qm_queue *queue)
++{
++ u32 phys = *queue->acc_reg & ~0xf;
++ struct sk_buff *skb;
++ struct npe_cont *cont;
++ int len, buflen;
++
++ if (!phys)
++ return NULL;
++
++ cont = dma_to_virt(queue->dev, phys);
++ cont = cont->virt;
++ skb = cont->h.skb;
++ buflen = cont->ctl.eth.buf_len;
++ len = cont->ctl.eth.pkt_len;
++ dma_unmap_single(queue->dev, cont->ctl.eth.phys_addr,
++ buflen, DMA_FROM_DEVICE);
++ qmgr_return_cont(dev_get_drvdata(queue->dev), cont);
++ skb_put(skb, len);
++#ifndef __ARMEB__
++ /* swap the payload of the SKB */
++ {
++ u32 *p = (u32*)((unsigned)skb->data & ~0x3);
++ u32 *e = (u32*)(((unsigned)skb->data + skb->len + 3) & ~0x3);
++ while (p < e)
++ *p = cpu_to_be32(*p), ++p;
++ }
++#endif
++ return skb;
++}
++
+diff -Nur linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c linux-2.6.17-owrt/drivers/net/ixp4xx/ucode_dl.c
+--- linux-2.6.17/drivers/net/ixp4xx/ucode_dl.c 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/drivers/net/ixp4xx/ucode_dl.c 2006-10-27 12:48:54.000000000 +0200
+@@ -0,0 +1,466 @@
++/*
++ * ucode_dl.c - provide an NPE device and a char-dev for microcode download
++ *
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/miscdevice.h>
++#include <linux/platform_device.h>
++#include <linux/fs.h>
++#include <linux/init.h>
++#include <linux/slab.h>
++#include <linux/firmware.h>
++#include <linux/dma-mapping.h>
++#include <linux/byteorder/swab.h>
++#include <asm/uaccess.h>
++#include <asm/io.h>
++
++#include <linux/ixp_npe.h>
++
++#define IXNPE_VERSION "IXP4XX NPE driver Version 0.2.0"
++
++#define DL_MAGIC 0xfeedf00d
++#define DL_MAGIC_SWAP 0x0df0edfe
++
++#define EOF_BLOCK 0xf
++#define IMG_SIZE(image) (((image)->size * sizeof(u32)) + \
++ sizeof(struct dl_image))
++
++#define BT_INSTR 0
++#define BT_DATA 1
++
++enum blk_type {
++ instruction,
++ data,
++};
++
++struct dl_block {
++ u32 type;
++ u32 offset;
++};
++
++struct dl_image {
++ u32 magic;
++ u32 id;
++ u32 size;
++ union {
++ u32 data[0];
++ struct dl_block block[0];
++ } u;
++};
++
++struct dl_codeblock {
++ u32 npe_addr;
++ u32 size;
++ u32 data[0];
++};
++
++static struct platform_driver ixp4xx_npe_driver;
++
++static void npe_stop(struct npe_info *npe)
++{
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_STOP);
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
++}
++static void npe_reset_active(struct npe_info *npe, u32 reg)
++{
++ u32 regval;
++
++ regval = npe_read_ecs_reg(npe, reg);
++ regval &= ~IX_NPEDL_MASK_ECS_REG_0_ACTIVE;
++ npe_write_ecs_reg(npe, reg, regval);
++}
++
++static void npe_start(struct npe_info *npe)
++{
++ npe_reset_active(npe, IX_NPEDL_ECS_PRI_1_CTXT_REG_0);
++ npe_reset_active(npe, IX_NPEDL_ECS_PRI_2_CTXT_REG_0);
++ npe_reset_active(npe, IX_NPEDL_ECS_DBG_CTXT_REG_0);
++
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE);
++ npe_write_exctl(npe, IX_NPEDL_EXCTL_CMD_NPE_START);
++}
++
++static int
++download_block(struct npe_info *npe, struct dl_codeblock *cb, unsigned type)
++{
++ int i;
++ int cmd;
++
++ switch (type) {
++ case BT_DATA:
++ cmd = IX_NPEDL_EXCTL_CMD_WR_DATA_MEM;
++ if (cb->npe_addr + cb->size > npe->plat->data_size) {
++ printk(KERN_INFO "Data size too large: %d+%d > %d\n",
++ cb->npe_addr, cb->size, npe->plat->data_size);
++ return -EIO;
++ }
++ break;
++ case BT_INSTR:
++ cmd = IX_NPEDL_EXCTL_CMD_WR_INS_MEM;
++ if (cb->npe_addr + cb->size > npe->plat->inst_size) {
++ printk(KERN_INFO "Instr size too large: %d+%d > %d\n",
++ cb->npe_addr, cb->size, npe->plat->inst_size);
++ return -EIO;
++ }
++ break;
++ default:
++ printk(KERN_INFO "Unknown CMD: %d\n", type);
++ return -EIO;
++ }
++
++ for (i=0; i < cb->size; i++) {
++ npe_write_cmd(npe, cb->npe_addr + i, cb->data[i], cmd);
++ }
++
++ return 0;
++}
++
++static int match_by_npeid(struct device *dev, void *id)
++{
++ struct npe_info *npe = dev_get_drvdata(dev);
++ if (!npe->plat)
++ return 0;
++ return (npe->plat->id == *(int*)id);
++}
++
++struct device *get_npe_by_id(int id)
++{
++ return driver_find_device(&ixp4xx_npe_driver.driver, NULL,
++ &id, match_by_npeid);
++}
++
++static int store_npe_image(struct dl_image *image, struct device *dev)
++{
++ struct dl_block *blk;
++ struct dl_codeblock *cb;
++ struct npe_info *npe;
++ int ret=0;
++
++ if (!dev) {
++ dev = get_npe_by_id( (image->id >> 24) & 0xf);
++ put_device(dev);
++ }
++ if (!dev)
++ return -ENODEV;
++
++ npe = dev_get_drvdata(dev);
++
++ if ( npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN) {
++ printk(KERN_INFO "Cowardly refusing to reload an Image "
++ "into the running %s\n", npe->plat->name);
++ return 0; /* indicate success anyway... */
++ }
++ npe_stop(npe);
++
++ for (blk = image->u.block; blk->type != EOF_BLOCK; blk++) {
++ if (blk->offset > image->size) {
++ printk(KERN_INFO "Block offset out of range\n");
++ return -EIO;
++ }
++ cb = (struct dl_codeblock*)&image->u.data[blk->offset];
++ if (blk->offset + cb->size + 2 > image->size) {
++ printk(KERN_INFO "Codeblock size out of range\n");
++ return -EIO;
++ }
++ if ((ret = download_block(npe, cb, blk->type)))
++ return ret;
++ }
++ *(u32*)npe->img_info = cpu_to_be32(image->id);
++ npe_start(npe);
++
++ printk(KERN_INFO "Image loaded to %s Func:%x, Rel: %x:%x, Status: %x\n",
++ npe->plat->name, npe->img_info[1], npe->img_info[2],
++ npe->img_info[3], npe_status(npe));
++ return 0;
++}
++
++static int ucode_open(struct inode *inode, struct file *file)
++{
++ file->private_data = kmalloc(sizeof(struct dl_image), GFP_KERNEL);
++ if (!file->private_data)
++ return -ENOMEM;
++ return 0;
++}
++
++static int ucode_close(struct inode *inode, struct file *file)
++{
++ kfree(file->private_data);
++ return 0;
++}
++
++static ssize_t ucode_write(struct file *file, const char __user *buf,
++ size_t count, loff_t *ppos)
++{
++ union {
++ char *data;
++ struct dl_image *image;
++ } u;
++ const char __user *cbuf = buf;
++
++ u.data = file->private_data;
++
++ while (count) {
++ int len;
++ if (*ppos < sizeof(struct dl_image)) {
++ len = sizeof(struct dl_image) - *ppos;
++ len = len > count ? count : len;
++ if (copy_from_user(u.data + *ppos, cbuf, len))
++ return -EFAULT;
++ count -= len;
++ *ppos += len;
++ cbuf += len;
++ continue;
++ } else if (*ppos == sizeof(struct dl_image)) {
++ void *data;
++ if (u.image->magic == DL_MAGIC_SWAP) {
++ printk(KERN_INFO "swapped image found\n");
++ u.image->id = swab32(u.image->id);
++ u.image->size = swab32(u.image->size);
++ } else if (u.image->magic != DL_MAGIC) {
++ printk(KERN_INFO "Bad magic:%x\n",
++ u.image->magic);
++ return -EFAULT;
++ }
++ len = IMG_SIZE(u.image);
++ data = kmalloc(len, GFP_KERNEL);
++ if (!data)
++ return -ENOMEM;
++ memcpy(data, u.data, *ppos);
++ kfree(u.data);
++ u.data = (char*)data;
++ file->private_data = data;
++ }
++ len = IMG_SIZE(u.image) - *ppos;
++ len = len > count ? count : len;
++ if (copy_from_user(u.data + *ppos, cbuf, len))
++ return -EFAULT;
++ count -= len;
++ *ppos += len;
++ cbuf += len;
++ if (*ppos == IMG_SIZE(u.image)) {
++ int ret, i;
++ *ppos = 0;
++ if (u.image->magic == DL_MAGIC_SWAP) {
++ for (i=0; i<u.image->size; i++) {
++ u.image->u.data[i] =
++ swab32(u.image->u.data[i]);
++ }
++ u.image->magic = swab32(u.image->magic);
++ }
++ ret = store_npe_image(u.image, NULL);
++ if (ret) {
++ printk(KERN_INFO "Error in NPE image: %x\n",
++ u.image->id);
++ return ret;
++ }
++ }
++ }
++ return (cbuf-buf);
++}
++
++static void npe_firmware_probe(struct device *dev)
++{
++#if (defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE)) \
++ && defined(MODULE)
++ const struct firmware *fw_entry;
++ struct npe_info *npe = dev_get_drvdata(dev);
++ struct dl_image *image;
++ int ret = -1, i;
++
++ if (request_firmware(&fw_entry, npe->plat->name, dev) != 0) {
++ return;
++ }
++ image = (struct dl_image*)fw_entry->data;
++ /* Sanity checks */
++ if (fw_entry->size < sizeof(struct dl_image)) {
++ printk(KERN_ERR "Firmware error: too small\n");
++ goto out;
++ }
++ if (image->magic == DL_MAGIC_SWAP) {
++ printk(KERN_INFO "swapped image found\n");
++ image->id = swab32(image->id);
++ image->size = swab32(image->size);
++ } else if (image->magic != DL_MAGIC) {
++ printk(KERN_ERR "Bad magic:%x\n", image->magic);
++ goto out;
++ }
++ if (IMG_SIZE(image) != fw_entry->size) {
++ printk(KERN_ERR "Firmware error: bad size\n");
++ goto out;
++ }
++ if (((image->id >> 24) & 0xf) != npe->plat->id) {
++ printk(KERN_ERR "NPE id missmatch\n");
++ goto out;
++ }
++ if (image->magic == DL_MAGIC_SWAP) {
++ for (i=0; i<image->size; i++) {
++ image->u.data[i] = swab32(image->u.data[i]);
++ }
++ image->magic = swab32(image->magic);
++ }
++
++ ret = store_npe_image(image, dev);
++out:
++ if (ret) {
++ printk(KERN_ERR "Error downloading Firmware for %s\n",
++ npe->plat->name);
++ }
++ release_firmware(fw_entry);
++#endif
++}
++
++static void disable_npe_irq(struct npe_info *npe)
++{
++ u32 reg;
++ reg = npe_reg_read(npe, IX_NPEDL_REG_OFFSET_CTL);
++ reg &= ~(IX_NPEMH_NPE_CTL_OFE | IX_NPEMH_NPE_CTL_IFE);
++ reg |= IX_NPEMH_NPE_CTL_OFEWE | IX_NPEMH_NPE_CTL_IFEWE;
++}
++
++static ssize_t show_npe_state(struct device *dev, struct device_attribute *attr,
++ char *buf)
++{
++ struct npe_info *npe = dev_get_drvdata(dev);
++
++ strcpy(buf, npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN ?
++ "start\n" : "stop\n");
++ return strlen(buf);
++}
++
++static ssize_t set_npe_state(struct device *dev, struct device_attribute *attr,
++ const char *buf, size_t count)
++{
++ struct npe_info *npe = dev_get_drvdata(dev);
++
++ if (!strncmp(buf, "start", 5)) {
++ printk("NPE start\n");
++ npe_start(npe);
++ }
++ if (!strncmp(buf, "stop", 4)) {
++ printk("NPE stop\n");
++ npe_stop(npe);
++ }
++ return count;
++}
++
++static DEVICE_ATTR(state, S_IRUGO | S_IWUSR, show_npe_state, set_npe_state);
++
++static int npe_probe(struct platform_device *pdev)
++{
++ struct resource *res;
++ struct npe_info *npe;
++ struct npe_plat_data *plat = pdev->dev.platform_data;
++ int size, ret=0;
++
++ if (!(res = platform_get_resource(pdev, IORESOURCE_MEM, 0)))
++ return -EIO;
++
++ if (!(npe = kzalloc(sizeof(struct npe_info), GFP_KERNEL)))
++ return -ENOMEM;
++
++ size = res->end - res->start +1;
++ npe->res = request_mem_region(res->start, size, plat->name);
++ if (!npe->res) {
++ ret = -EBUSY;
++ printk(KERN_ERR "Failed to get memregion(%x, %x)\n",
++ res->start, size);
++ goto out_free;
++ }
++
++ npe->addr = ioremap(res->start, size);
++ if (!npe->addr) {
++ ret = -ENOMEM;
++ printk(KERN_ERR "Failed to ioremap(%x, %x)\n",
++ res->start, size);
++ goto out_rel;
++ }
++
++ pdev->dev.coherent_dma_mask = DMA_32BIT_MASK;
++
++ platform_set_drvdata(pdev, npe);
++
++ device_create_file(&pdev->dev, &dev_attr_state);
++
++ npe->plat = plat;
++ disable_npe_irq(npe);
++ if (! (npe_status(npe) & IX_NPEDL_EXCTL_STATUS_RUN))
++ npe_firmware_probe(&pdev->dev);
++
++ return 0;
++
++out_rel:
++ release_resource(npe->res);
++out_free:
++ kfree(npe);
++ return ret;
++}
++
++static struct file_operations ucode_dl_fops = {
++ .owner = THIS_MODULE,
++ .write = ucode_write,
++ .open = ucode_open,
++ .release = ucode_close,
++};
++
++static struct miscdevice ucode_dl_dev = {
++ .minor = MICROCODE_MINOR,
++ .name = "ixp4xx_ucode",
++ .fops = &ucode_dl_fops,
++};
++
++static int npe_remove(struct platform_device *pdev)
++{
++ struct npe_info *npe = platform_get_drvdata(pdev);
++
++ device_remove_file(&pdev->dev, &dev_attr_state);
++
++ iounmap(npe->addr);
++ release_resource(npe->res);
++ kfree(npe);
++ return 0;
++}
++
++static struct platform_driver ixp4xx_npe_driver = {
++ .driver = {
++ .name = "ixp4xx_npe",
++ .owner = THIS_MODULE,
++ },
++ .probe = npe_probe,
++ .remove = npe_remove,
++};
++
++static int __init init_npedriver(void)
++{
++ int ret;
++ if ((ret = misc_register(&ucode_dl_dev))){
++ printk(KERN_ERR "Failed to register misc device %d\n",
++ MICROCODE_MINOR);
++ return ret;
++ }
++ if ((ret = platform_driver_register(&ixp4xx_npe_driver)))
++ misc_deregister(&ucode_dl_dev);
++ else
++ printk(KERN_INFO IXNPE_VERSION " initialized\n");
++
++ return ret;
++
++}
++
++static void __exit finish_npedriver(void)
++{
++ misc_deregister(&ucode_dl_dev);
++ platform_driver_unregister(&ixp4xx_npe_driver);
++}
++
++module_init(init_npedriver);
++module_exit(finish_npedriver);
++
++MODULE_LICENSE("GPL");
++MODULE_AUTHOR("Christian Hohnstaedt <chohnstaedt@innominate.com>");
++
++EXPORT_SYMBOL(get_npe_by_id);
+diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+--- linux-2.6.17/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h 2006-10-27 12:48:54.000000000 +0200
+@@ -22,6 +22,8 @@
+ #ifndef _ASM_ARM_IXP4XX_H_
+ #define _ASM_ARM_IXP4XX_H_
+
++#include "npe_regs.h"
++
+ /*
+ * IXP4xx Linux Memory Map:
+ *
+diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/npe_regs.h linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/npe_regs.h
+--- linux-2.6.17/include/asm-arm/arch-ixp4xx/npe_regs.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/npe_regs.h 2006-10-27 12:48:54.000000000 +0200
+@@ -0,0 +1,82 @@
++#ifndef NPE_REGS_H
++#define NPE_REGS_H
++
++/* Execution Address */
++#define IX_NPEDL_REG_OFFSET_EXAD 0x00
++/* Execution Data */
++#define IX_NPEDL_REG_OFFSET_EXDATA 0x04
++/* Execution Control */
++#define IX_NPEDL_REG_OFFSET_EXCTL 0x08
++/* Execution Count */
++#define IX_NPEDL_REG_OFFSET_EXCT 0x0C
++/* Action Point 0 */
++#define IX_NPEDL_REG_OFFSET_AP0 0x10
++/* Action Point 1 */
++#define IX_NPEDL_REG_OFFSET_AP1 0x14
++/* Action Point 2 */
++#define IX_NPEDL_REG_OFFSET_AP2 0x18
++/* Action Point 3 */
++#define IX_NPEDL_REG_OFFSET_AP3 0x1C
++/* Watchpoint FIFO */
++#define IX_NPEDL_REG_OFFSET_WFIFO 0x20
++/* Watch Count */
++#define IX_NPEDL_REG_OFFSET_WC 0x24
++/* Profile Count */
++#define IX_NPEDL_REG_OFFSET_PROFCT 0x28
++
++/* Messaging Status */
++#define IX_NPEDL_REG_OFFSET_STAT 0x2C
++/* Messaging Control */
++#define IX_NPEDL_REG_OFFSET_CTL 0x30
++/* Mailbox Status */
++#define IX_NPEDL_REG_OFFSET_MBST 0x34
++/* messaging in/out FIFO */
++#define IX_NPEDL_REG_OFFSET_FIFO 0x38
++
++
++#define IX_NPEDL_MASK_ECS_DBG_REG_2_IF 0x00100000
++#define IX_NPEDL_MASK_ECS_DBG_REG_2_IE 0x00080000
++#define IX_NPEDL_MASK_ECS_REG_0_ACTIVE 0x80000000
++
++#define IX_NPEDL_EXCTL_CMD_NPE_STEP 0x01
++#define IX_NPEDL_EXCTL_CMD_NPE_START 0x02
++#define IX_NPEDL_EXCTL_CMD_NPE_STOP 0x03
++#define IX_NPEDL_EXCTL_CMD_NPE_CLR_PIPE 0x04
++#define IX_NPEDL_EXCTL_CMD_CLR_PROFILE_CNT 0x0C
++#define IX_NPEDL_EXCTL_CMD_RD_INS_MEM 0x10
++#define IX_NPEDL_EXCTL_CMD_WR_INS_MEM 0x11
++#define IX_NPEDL_EXCTL_CMD_RD_DATA_MEM 0x12
++#define IX_NPEDL_EXCTL_CMD_WR_DATA_MEM 0x13
++#define IX_NPEDL_EXCTL_CMD_RD_ECS_REG 0x14
++#define IX_NPEDL_EXCTL_CMD_WR_ECS_REG 0x15
++
++#define IX_NPEDL_EXCTL_STATUS_RUN 0x80000000
++#define IX_NPEDL_EXCTL_STATUS_STOP 0x40000000
++#define IX_NPEDL_EXCTL_STATUS_CLEAR 0x20000000
++
++#define IX_NPEDL_MASK_WFIFO_VALID 0x80000000
++#define IX_NPEDL_MASK_STAT_OFNE 0x00010000
++#define IX_NPEDL_MASK_STAT_IFNE 0x00080000
++
++#define IX_NPEDL_ECS_DBG_CTXT_REG_0 0x0C
++#define IX_NPEDL_ECS_PRI_1_CTXT_REG_0 0x04
++#define IX_NPEDL_ECS_PRI_2_CTXT_REG_0 0x08
++
++/* NPE control register bit definitions */
++#define IX_NPEMH_NPE_CTL_OFE (1 << 16) /**< OutFifoEnable */
++#define IX_NPEMH_NPE_CTL_IFE (1 << 17) /**< InFifoEnable */
++#define IX_NPEMH_NPE_CTL_OFEWE (1 << 24) /**< OutFifoEnableWriteEnable */
++#define IX_NPEMH_NPE_CTL_IFEWE (1 << 25) /**< InFifoEnableWriteEnable */
++
++/* NPE status register bit definitions */
++#define IX_NPEMH_NPE_STAT_OFNE (1 << 16) /**< OutFifoNotEmpty */
++#define IX_NPEMH_NPE_STAT_IFNF (1 << 17) /**< InFifoNotFull */
++#define IX_NPEMH_NPE_STAT_OFNF (1 << 18) /**< OutFifoNotFull */
++#define IX_NPEMH_NPE_STAT_IFNE (1 << 19) /**< InFifoNotEmpty */
++#define IX_NPEMH_NPE_STAT_MBINT (1 << 20) /**< Mailbox interrupt */
++#define IX_NPEMH_NPE_STAT_IFINT (1 << 21) /**< InFifo interrupt */
++#define IX_NPEMH_NPE_STAT_OFINT (1 << 22) /**< OutFifo interrupt */
++#define IX_NPEMH_NPE_STAT_WFINT (1 << 23) /**< WatchFifo interrupt */
++
++#endif
++
+diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/platform.h linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/platform.h
+--- linux-2.6.17/include/asm-arm/arch-ixp4xx/platform.h 2006-06-18 03:49:35.000000000 +0200
++++ linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/platform.h 2006-10-27 12:48:54.000000000 +0200
+@@ -86,6 +86,22 @@
+ unsigned long scl_pin;
+ };
+
++struct npe_plat_data {
++ const char *name;
++ int data_size;
++ int inst_size;
++ int id; /* Node ID */
++};
++
++struct mac_plat_info {
++ int npe_id; /* Node ID of the NPE for this port */
++ int port_id; /* Port ID for NPE-B @ ixp465 */
++ int eth_id; /* Physical ID */
++ int phy_id; /* ID of the connected PHY (PCB/platform dependent) */
++ int rxq_id; /* Queue ID of the RX-free q*/
++ int txq_id; /* Where to push the outgoing packets */
++};
++
+
+ struct sys_timer;
+
+diff -Nur linux-2.6.17/include/linux/ixp_npe.h linux-2.6.17-owrt/include/linux/ixp_npe.h
+--- linux-2.6.17/include/linux/ixp_npe.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/include/linux/ixp_npe.h 2006-10-27 12:48:54.000000000 +0200
+@@ -0,0 +1,85 @@
++/*
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#ifndef NPE_DEVICE_H
++#define NPE_DEVICE_H
++
++#include <linux/miscdevice.h>
++#include <asm/hardware.h>
++
++struct npe_info {
++ struct resource *res;
++ void __iomem *addr;
++ struct npe_plat_data *plat;
++ u8 img_info[4];
++ u32 exec_count;
++ u32 ctx_reg2;
++};
++
++
++static inline void npe_reg_write(struct npe_info *npe, u32 reg, u32 val)
++{
++ *(volatile u32*)((u8*)(npe->addr) + reg) = val;
++}
++
++static inline u32 npe_reg_read(struct npe_info *npe, u32 reg)
++{
++ return *(volatile u32*)((u8*)(npe->addr) + reg);
++}
++
++static inline u32 npe_status(struct npe_info *npe)
++{
++ return npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXCTL);
++}
++
++/* ixNpeDlNpeMgrCommandIssue */
++static inline void npe_write_exctl(struct npe_info *npe, u32 cmd)
++{
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
++}
++/* ixNpeDlNpeMgrWriteCommandIssue */
++static inline void
++npe_write_cmd(struct npe_info *npe, u32 addr, u32 data, int cmd)
++{
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXDATA, data);
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXAD, addr);
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
++}
++/* ixNpeDlNpeMgrReadCommandIssue */
++static inline u32
++npe_read_cmd(struct npe_info *npe, u32 addr, int cmd)
++{
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXAD, addr);
++ npe_reg_write(npe, IX_NPEDL_REG_OFFSET_EXCTL, cmd);
++ /* Intel reads the data twice - so do we... */
++ npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXDATA);
++ return npe_reg_read(npe, IX_NPEDL_REG_OFFSET_EXDATA);
++}
++
++/* ixNpeDlNpeMgrExecAccRegWrite */
++static inline void npe_write_ecs_reg(struct npe_info *npe, u32 addr, u32 data)
++{
++ npe_write_cmd(npe, addr, data, IX_NPEDL_EXCTL_CMD_WR_ECS_REG);
++}
++/* ixNpeDlNpeMgrExecAccRegRead */
++static inline u32 npe_read_ecs_reg(struct npe_info *npe, u32 addr)
++{
++ return npe_read_cmd(npe, addr, IX_NPEDL_EXCTL_CMD_RD_ECS_REG);
++}
++
++extern struct device *get_npe_by_id(int id);
++
++/* NPE Messages */
++extern int
++npe_mh_setportaddr(struct npe_info *npe, struct mac_plat_info *mp, u8 *macaddr);
++extern int
++npe_mh_disable_firewall(struct npe_info *npe, struct mac_plat_info *mp);
++extern int
++npe_mh_set_rxqid(struct npe_info *npe, struct mac_plat_info *mp, int qid);
++extern int
++npe_mh_npe_loopback_mode(struct npe_info *npe, struct mac_plat_info *mp, int enable);
++
++#endif
+diff -Nur linux-2.6.17/include/linux/ixp_qmgr.h linux-2.6.17-owrt/include/linux/ixp_qmgr.h
+--- linux-2.6.17/include/linux/ixp_qmgr.h 1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.17-owrt/include/linux/ixp_qmgr.h 2006-10-27 12:48:54.000000000 +0200
+@@ -0,0 +1,188 @@
++/*
++ * Copyright (C) 2006 Christian Hohnstaedt <chohnstaedt@innominate.com>
++ *
++ * This file is released under the GPLv2
++ */
++
++#ifndef IX_QMGR_H
++#define IX_QMGR_H
++
++#include <linux/skbuff.h>
++#include <linux/list.h>
++#include <linux/if_ether.h>
++#include <linux/spinlock.h>
++#include <linux/platform_device.h>
++#include <asm/atomic.h>
++
++/* All offsets are in 32bit words */
++#define QUE_LOW_STAT0 0x100 /* 4x Status of the 32 lower queues 0-31 */
++#define QUE_UO_STAT0 0x104 /* 2x Underflow/Overflow status bits*/
++#define QUE_UPP_STAT0 0x106 /* 2x Status of thew 32 upper queues 32-63 */
++#define INT0_SRC_SELREG0 0x108 /* 4x */
++#define QUE_IE_REG0 0x10c /* 2x */
++#define QUE_INT_REG0 0x10e /* 2x IRQ reg, write 1 to reset IRQ */
++
++#define IX_QMGR_QCFG_BASE 0x800
++#define IX_QMGR_QCFG_SIZE 0x40
++#define IX_QMGR_SRAM_SPACE (IX_QMGR_QCFG_BASE + IX_QMGR_QCFG_SIZE)
++
++#define MAX_QUEUES 32 /* first, we only support the lower 32 queues */
++#define MAX_NPES 3
++
++enum {
++ Q_IRQ_ID_E = 0, /* Queue Empty due to last read */
++ Q_IRQ_ID_NE, /* Queue Nearly Empty due to last read */
++ Q_IRQ_ID_NF, /* Queue Nearly Full due to last write */
++ Q_IRQ_ID_F, /* Queue Full due to last write */
++ Q_IRQ_ID_NOT_E, /* Queue Not Empty due to last write */
++ Q_IRQ_ID_NOT_NE, /* Queue Not Nearly Empty due to last write */
++ Q_IRQ_ID_NOT_NF, /* Queue Not Nearly Full due to last read */
++ Q_IRQ_ID_NOT_F /* Queue Not Full due to last read */
++};
++
++extern struct qm_queue *request_queue(int qid, int len);
++extern void release_queue(struct qm_queue *queue);
++extern int queue_set_irq_src(struct qm_queue *queue, int flag);
++extern void queue_set_watermarks(struct qm_queue *, unsigned ne, unsigned nf);
++extern int queue_len(struct qm_queue *queue);
++
++struct qm_qmgr;
++struct qm_queue;
++
++typedef void(*queue_cb)(struct qm_queue *);
++
++struct qm_queue {
++ int addr; /* word offset from IX_QMGR_SRAM_SPACE */
++ int len; /* size in words */
++ int id; /* Q Id */
++ u32 __iomem *acc_reg;
++ struct device *dev;
++ atomic_t use;
++ queue_cb irq_cb;
++ void *cb_data;
++};
++
++struct eth_ctl {
++ u32 next;
++#ifdef __ARMEB__
++ u16 buf_len;
++ u16 pkt_len;
++#else
++ u16 pkt_len;
++ u16 buf_len;
++#endif
++ u32 phys_addr;
++ u8 dest_id;
++ u8 src_id;
++ u16 flags;
++ u8 qos;
++ u8 padlen;
++ u16 vlan_tci;
++ u8 dest_mac[ETH_ALEN];
++ u8 src_mac[ETH_ALEN];
++};
++
++struct npe_cont {
++ union {
++ struct eth_ctl eth;
++ } ctl;
++ union {
++ struct sk_buff *skb;
++ void *ptr;
++ } h;
++ struct npe_cont *next;
++ struct npe_cont *virt;
++ dma_addr_t phys;
++};
++
++struct qm_qmgr {
++ u32 __iomem *addr;
++ struct resource *res;
++ struct qm_queue *queues[MAX_QUEUES];
++ rwlock_t lock;
++ struct npe_cont *pool;
++ struct dma_pool *dmapool;
++ int irq;
++};
++
++static inline void queue_write_cfg_reg(struct qm_queue *queue, u32 val)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id) = val;
++}
++static inline u32 queue_read_cfg_reg(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ return *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id);
++}
++
++static inline void queue_ack_irq(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ *(qmgr->addr + QUE_INT_REG0) = 1 << queue->id;
++}
++
++static inline void queue_enable_irq(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ *(qmgr->addr + QUE_IE_REG0) |= 1 << queue->id;
++}
++
++static inline void queue_disable_irq(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ *(qmgr->addr + QUE_IE_REG0) &= ~(1 << queue->id);
++}
++
++static inline void queue_put_entry(struct qm_queue *queue, u32 entry)
++{
++ *(queue->acc_reg) = entry;
++}
++
++static inline struct npe_cont *qmgr_get_cont(struct qm_qmgr *qmgr)
++{
++ unsigned long flags;
++ struct npe_cont *cont;
++
++ if (!qmgr->pool)
++ return NULL;
++ write_lock_irqsave(&qmgr->lock, flags);
++ cont = qmgr->pool;
++ qmgr->pool = cont->next;
++ write_unlock_irqrestore(&qmgr->lock, flags);
++ return cont;
++}
++
++static inline void qmgr_return_cont(struct qm_qmgr *qmgr,struct npe_cont *cont)
++{
++ unsigned long flags;
++
++ write_lock_irqsave(&qmgr->lock, flags);
++ cont->next = qmgr->pool;
++ qmgr->pool = cont;
++ write_unlock_irqrestore(&qmgr->lock, flags);
++}
++
++static inline int queue_stat(struct qm_queue *queue)
++{
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++ u32 reg = *(qmgr->addr + QUE_UO_STAT0 + (queue->id >> 4));
++ return (reg >> (queue->id & 0xf) << 1) & 3;
++}
++
++/* Prints the queue state, which is very, very helpfull for debugging */
++static inline void queue_state(struct qm_queue *queue)
++{
++ u32 val=0, lstat=0;
++ int offs;
++ struct qm_qmgr *qmgr = dev_get_drvdata(queue->dev);
++
++ offs = queue->id/8 + QUE_LOW_STAT0;
++ val = *(qmgr->addr + IX_QMGR_QCFG_BASE + queue->id);
++ lstat = (*(qmgr->addr + offs) >> ((queue->id % 8)*4)) & 0x0f;
++
++ printk("Qid[%02d]: Wptr=%4x, Rptr=%4x, diff=%4x, Stat:%x\n", queue->id,
++ val&0x7f, (val>>7) &0x7f, (val - (val >> 7)) & 0x7f, lstat);
++}
++
++#endif
diff --git a/target/linux/ixp4xx-2.6/patches/101-npe_driver_fix_qmgr.patch b/target/linux/ixp4xx-2.6/patches/101-npe_driver_fix_qmgr.patch
new file mode 100644
index 0000000000..7e2a4a12df
--- /dev/null
+++ b/target/linux/ixp4xx-2.6/patches/101-npe_driver_fix_qmgr.patch
@@ -0,0 +1,36 @@
+
+---
+ drivers/net/ixp4xx/ixp4xx_qmgr.c | 8 ++++----
+ 1 file changed, 4 insertions(+), 4 deletions(-)
+
+--- linux-ixp4xx.orig/drivers/net/ixp4xx/ixp4xx_qmgr.c 2006-10-15 18:52:35.000000000 +0200
++++ linux-ixp4xx/drivers/net/ixp4xx/ixp4xx_qmgr.c 2006-10-15 18:54:32.000000000 +0200
+@@ -107,7 +107,7 @@ static int get_free_qspace(struct qm_qmg
+ return -1;
+ }
+
+-static inline int log2(int x)
++static inline int _log2(int x)
+ {
+ int r=0;
+ while(x>>=1)
+@@ -127,7 +127,7 @@ static inline int log2(int x)
+ */
+ static int conf_q_regs(struct qm_queue *queue)
+ {
+- int bsize = log2(queue->len/16);
++ int bsize = _log2(queue->len/16);
+ int baddr = queue->addr + IX_QMGR_QCFG_SIZE;
+
+ /* +2, because baddr is in words and not in bytes */
+@@ -141,8 +141,8 @@ void queue_set_watermarks(struct qm_queu
+ u32 val;
+ /* calculate the register values
+ * 0->0, 1->1, 2->2, 4->3, 8->4 16->5...*/
+- ne = log2(ne<<1) & 0x7;
+- nf = log2(nf<<1) & 0x7;
++ ne = _log2(ne<<1) & 0x7;
++ nf = _log2(nf<<1) & 0x7;
+
+ /* Mask out old watermarks */
+ val = queue_read_cfg_reg(queue) & ~0xfc000000;
diff --git a/target/linux/ixp4xx-2.6/patches/001-gateway_7001.patch b/target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch
index d144758b24..49aefdab15 100644
--- a/target/linux/ixp4xx-2.6/patches/001-gateway_7001.patch
+++ b/target/linux/ixp4xx-2.6/patches/200-gateway_7001.patch
@@ -1,6 +1,6 @@
diff -Nur linux-2.6.17/arch/arm/boot/compressed/head-xscale.S linux-2.6.17-owrt/arch/arm/boot/compressed/head-xscale.S
---- linux-2.6.17/arch/arm/boot/compressed/head-xscale.S 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/boot/compressed/head-xscale.S 2006-08-05 17:02:21.000000000 +0200
+--- linux-2.6.17/arch/arm/boot/compressed/head-xscale.S 2006-09-11 12:29:51.000000000 +0200
++++ linux-2.6.17-owrt/arch/arm/boot/compressed/head-xscale.S 2006-09-11 12:30:03.000000000 +0200
@@ -47,6 +47,11 @@
orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
#endif
@@ -13,44 +13,9 @@ diff -Nur linux-2.6.17/arch/arm/boot/compressed/head-xscale.S linux-2.6.17-owrt/
#ifdef CONFIG_ARCH_IXP2000
mov r1, #-1
mov r0, #0xd6000000
-diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/coyote-setup.c
---- linux-2.6.17/arch/arm/mach-ixp4xx/coyote-setup.c 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/coyote-setup.c 2006-08-05 17:02:21.000000000 +0200
-@@ -1,9 +1,10 @@
- /*
- * arch/arm/mach-ixp4xx/coyote-setup.c
- *
-- * Board setup for ADI Engineering and IXDGP425 boards
-+ * Board setup for ADI Engineering, IXDGP425 and Gateway 7001 boards
- *
- * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org>
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- */
-@@ -111,6 +112,19 @@
- MACHINE_END
- #endif
-
-+#ifdef CONFIG_MACH_GATEWAY7001
-+MACHINE_START(GATEWAY7001, "Gateway 7001")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
-+ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .timer = &ixp4xx_timer,
-+ .boot_params = 0x0100,
-+ .init_machine = coyote_init,
-+MACHINE_END
-+#endif
-+
- /*
- * IXDPG425 is identical to Coyote except for which serial port
- * is connected.
diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c
--- linux-2.6.17/arch/arm/mach-ixp4xx/gateway7001-pci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2006-08-06 10:37:35.000000000 +0200
++++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2006-09-11 12:30:03.000000000 +0200
@@ -0,0 +1,67 @@
+/*
+ * arch/arch/mach-ixp4xx/gateway7001-pci.c
@@ -120,8 +85,8 @@ diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.17-owrt/
+
+subsys_initcall(gateway7001_pci_init);
diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/Kconfig linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Kconfig
---- linux-2.6.17/arch/arm/mach-ixp4xx/Kconfig 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Kconfig 2006-08-05 17:04:13.000000000 +0200
+--- linux-2.6.17/arch/arm/mach-ixp4xx/Kconfig 2006-09-11 12:29:51.000000000 +0200
++++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Kconfig 2006-09-11 12:30:03.000000000 +0200
@@ -33,6 +33,14 @@
Engineering Coyote Gateway Reference Platform. For more
information on this platform, see <file:Documentation/arm/IXP4xx>.
@@ -138,8 +103,8 @@ diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/Kconfig linux-2.6.17-owrt/arch/arm/m
bool "IXDP425"
select PCI
diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/Makefile linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Makefile
---- linux-2.6.17/arch/arm/mach-ixp4xx/Makefile 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Makefile 2006-08-05 17:02:21.000000000 +0200
+--- linux-2.6.17/arch/arm/mach-ixp4xx/Makefile 2006-09-11 12:29:51.000000000 +0200
++++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/Makefile 2006-09-11 12:30:03.000000000 +0200
@@ -11,4 +11,5 @@
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o
obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o
@@ -147,17 +112,111 @@ diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/Makefile linux-2.6.17-owrt/arch/arm/
+obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o coyote-setup.o
diff -Nur linux-2.6.17/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/uncompress.h
---- linux-2.6.17/include/asm-arm/arch-ixp4xx/uncompress.h 2006-06-18 03:49:35.000000000 +0200
-+++ linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2006-08-05 17:03:32.000000000 +0200
+--- linux-2.6.17/include/asm-arm/arch-ixp4xx/uncompress.h 2006-09-11 12:29:51.000000000 +0200
++++ linux-2.6.17-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2006-09-11 12:31:21.000000000 +0200
@@ -38,9 +38,9 @@
static __inline__ void __arch_decomp_setup(unsigned long arch_id)
{
/*
- * Coyote and gtwx5715 only have UART2 connected
-+ * Some targets only have UART2 connected
++ * Some boards only have UART2 connected
*/
- if (machine_is_adi_coyote() || machine_is_gtwx5715())
+ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001())
uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
else
uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
+diff -Nur linux-2.6.17/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.17-owrt/arch/arm/mach-ixp4xx/coyote-setup.c
+--- linux-2.6.17/arch/arm/mach-ixp4xx/coyote-setup.c 2006-09-11 12:29:51.000000000 +0200
++++ linux-2.6.17-owrt/arch/arm/mach-ixp4xx/coyote-setup.c 2006-09-11 12:37:51.000000000 +0200
+@@ -1,9 +1,10 @@
+ /*
+ * arch/arm/mach-ixp4xx/coyote-setup.c
+ *
+- * Board setup for ADI Engineering and IXDGP425 boards
++ * Board setup for ADI Engineering, IXDGP425 and Gateway 7001 boards
+ *
+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
++ * Copyright (C) 2006 Imre Kaloz <Kaloz@openwrt.org>
+ *
+ * Author: Deepak Saxena <dsaxena@plexity.net>
+ */
+@@ -73,9 +74,57 @@
+ .resource = &coyote_uart_resource,
+ };
+
++/* MACs */
++static struct resource res_mac0 = {
++ .start = IXP4XX_EthB_BASE_PHYS,
++ .end = IXP4XX_EthB_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct resource res_mac1 = {
++ .start = IXP4XX_EthC_BASE_PHYS,
++ .end = IXP4XX_EthC_BASE_PHYS + 0x1ff,
++ .flags = IORESOURCE_MEM,
++};
++
++static struct mac_plat_info plat_mac0 = {
++ .npe_id = 1,
++ .phy_id = 0,
++ .eth_id = 0,
++ .rxq_id = 27,
++ .txq_id = 24,
++};
++
++static struct mac_plat_info plat_mac1 = {
++ .npe_id = 2,
++ .phy_id = 1,
++ .eth_id = 1,
++ .rxq_id = 28,
++ .txq_id = 25,
++};
++
++static struct platform_device mac0 = {
++ .name = "ixp4xx_mac",
++ .id = 0,
++ .dev.platform_data = &plat_mac0,
++ .num_resources = 1,
++ .resource = &res_mac0,
++};
++
++static struct platform_device mac1 = {
++ .name = "ixp4xx_mac",
++ .id = 1,
++ .dev.platform_data = &plat_mac1,
++ .num_resources = 1,
++ .resource = &res_mac1,
++};
++
++
+ static struct platform_device *coyote_devices[] __initdata = {
+ &coyote_flash,
+- &coyote_uart
++ &coyote_uart,
++ &mac0,
++ &mac1
+ };
+
+ static void __init coyote_init(void)
+@@ -111,6 +160,19 @@
+ MACHINE_END
+ #endif
+
++#ifdef CONFIG_MACH_GATEWAY7001
++MACHINE_START(GATEWAY7001, "Gateway 7001")
++ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
++ .phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
++ .io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
++ .map_io = ixp4xx_map_io,
++ .init_irq = ixp4xx_init_irq,
++ .timer = &ixp4xx_timer,
++ .boot_params = 0x0100,
++ .init_machine = coyote_init,
++MACHINE_END
++#endif
++
+ /*
+ * IXDPG425 is identical to Coyote except for which serial port
+ * is connected.
diff --git a/target/linux/x86-2.6/config b/target/linux/x86-2.6/config
index 6128ea592f..8fc5d6b13d 100644
--- a/target/linux/x86-2.6/config
+++ b/target/linux/x86-2.6/config
@@ -1060,7 +1060,7 @@ CONFIG_E1000=m
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
+CONFIG_R8169=m
CONFIG_SIS190=m
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set