aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorHenryk Heisig <hyniu@o2.pl>2018-01-15 06:44:14 +0100
committerPiotr Dymacz <pepe2k@gmail.com>2018-04-07 00:09:05 +0200
commitc0742307a18178ee7d2cee1fc6b0e199ccb1e1fa (patch)
treed760d522791c179b1dc200adf2656b92b36f9417 /target
parentb834487203996e71c5ea25f83488873483b96522 (diff)
downloadupstream-c0742307a18178ee7d2cee1fc6b0e199ccb1e1fa.tar.gz
upstream-c0742307a18178ee7d2cee1fc6b0e199ccb1e1fa.tar.bz2
upstream-c0742307a18178ee7d2cee1fc6b0e199ccb1e1fa.zip
ar71xx: add support for TP-Link Archer C60 v2
TP-Link Archer C60 v2 is a dual-band AC1350 router, based on Qualcomm/Atheros QCA9561 + QCA9886. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR2) - 8 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 2T2R 5 GHz - 5x 10/100 Mbps Ethernet - 7x LED, 2x button - UART header on PCB Flash instruction (web): Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and use OEM System Tools - Firmware Upgrade site. Flash instruction (recovery): 1. Set PC to fixed IP address 192.168.0.66 2. Download lede-ar71xx-generic-archer-c60-v2-squashfs-factory.bin and rename it to tp_recovery.bin 3. Start a tftp server with the file tp_recovery.bin in its root directory 4. Turn off the router 5. Press and hold reset button 6. Turn on router with the reset button pressed and wait ~15 seconds 7. Release the reset button and after a short time the firmware should be transferred from the tftp server 8. Wait ~30 second to complete recovery Flash instruction (under U-Boot, using UART): tftp 0x81000000 lede-ar71xx-...-sysupgrade.bin erase 0x9f030000 +$filesize cp.b $fileaddr 0x9f030000 $filesize reset Signed-off-by: Henryk Heisig <hyniu@o2.pl>
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds3
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.91
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt10
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c82
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/generic/config-default1
-rw-r--r--target/linux/ar71xx/image/generic-tp-link.mk12
14 files changed, 119 insertions, 4 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 58e2c9743c..cf24e465a3 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -128,7 +128,8 @@ archer-c7)
;;
archer-c58-v1|\
archer-c59-v1|\
-archer-c60-v1)
+archer-c60-v1|\
+archer-c60-v2)
ucidef_set_led_switch "lan" "LAN" "$board:green:lan" "switch0" "0x1E"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan2g" "phy1tpt"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index ffdc90fbfc..dfe97e8133 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -248,7 +248,8 @@ ar71xx_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
;;
- archer-c60-v1)
+ archer-c60-v1|\
+ archer-c60-v2)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:1" "2:lan:2" "3:lan:3" "4:lan:4"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index bd0926c213..797c30f8a5 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -64,6 +64,7 @@ get_status_led() {
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
+ archer-c60-v2|\
archer-c7-v4|\
fritz300e|\
gl-usb150|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index c93ce2a614..5d01701aa8 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -163,6 +163,7 @@ case "$FIRMWARE" in
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
+ archer-c60-v2|\
cf-e355ac-v2|\
cf-e375ac)
ath10kcal_extract "art" 20480 12064
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index 0530d595a7..a763938ecd 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -14,7 +14,8 @@ board=$(board_name)
case "$board" in
archer-c58-v1|\
archer-c59-v1|\
- archer-c60-v1)
+ archer-c60-v1|\
+ archer-c60-v2)
echo $(macaddr_add $(mtd_get_mac_binary mac 8) $(($PHYNBR - 1)) ) > /sys${DEVPATH}/macaddress
;;
*)
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index b711150ee9..7249cb6151 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -485,6 +485,9 @@ ar71xx_board_detect() {
*"Archer C60 v1")
name="archer-c60-v1"
;;
+ *"Archer C60 v2")
+ name="archer-c60-v2"
+ ;;
*"Archer C7")
name="archer-c7"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index fe927ea550..633a7e8e56 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -202,6 +202,7 @@ platform_check_image() {
archer-c58-v1|\
archer-c59-v1|\
archer-c60-v1|\
+ archer-c60-v2|\
archer-c7-v4|\
bullet-m|\
c-55|\
diff --git a/target/linux/ar71xx/config-4.9 b/target/linux/ar71xx/config-4.9
index e78b16cd19..5cea1b7bde 100644
--- a/target/linux/ar71xx/config-4.9
+++ b/target/linux/ar71xx/config-4.9
@@ -53,6 +53,7 @@ CONFIG_ATH79=y
# CONFIG_ATH79_MACH_ARCHER_C58_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C59_V1 is not set
# CONFIG_ATH79_MACH_ARCHER_C60_V1 is not set
+# CONFIG_ATH79_MACH_ARCHER_C60_V2 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_ARDUINO_YUN is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 965d876e08..4a032f6021 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1529,6 +1529,16 @@ config ATH79_MACH_ARCHER_C60_V1
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_ARCHER_C60_V2
+ bool "TP-LINK Archer C60 v2 support"
+ select SOC_QCA956X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_ARCHER_C7
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
select SOC_QCA955X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index d549dd39b7..e606e2c3df 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -63,6 +63,7 @@ obj-$(CONFIG_ATH79_MACH_ARCHER_C25_V1) += mach-archer-c25-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C58_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C59_V1) += mach-archer-c59-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V1) += mach-archer-c60-v1.o
+obj-$(CONFIG_ATH79_MACH_ARCHER_C60_V2) += mach-archer-c60-v1.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7.o
obj-$(CONFIG_ATH79_MACH_ARCHER_C7) += mach-archer-c7-v4.o
obj-$(CONFIG_ATH79_MACH_ARDUINO_YUN) += mach-arduino-yun.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
index 4d83fa737b..88f4f081a3 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-archer-c60-v1.c
@@ -1,7 +1,7 @@
/*
* TP-Link Archer C60 v1 board support
*
- * Copyright (C) 2016 Henryk Heisig <hyniu@o2.pl>
+ * Copyright (C) 2017 Henryk Heisig <hyniu@o2.pl>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -83,6 +83,44 @@ static struct gpio_led archer_c60_v1_leds_gpio[] __initdata = {
},
};
+static struct gpio_led archer_c60_v2_leds_gpio[] __initdata = {
+ {
+ .name = "archer-c60-v2:green:power",
+ .gpio = ARCHER_C60_V1_GPIO_LED_POWER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v2:green:wlan2g",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WLAN2,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v2:green:wlan5g",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WLAN5,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v2:green:lan",
+ .gpio = ARCHER_C60_V1_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v2:green:wan",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v2:amber:wan",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "archer-c60-v2:green:wps",
+ .gpio = ARCHER_C60_V1_GPIO_LED_WPS,
+ .active_low = 1,
+ },
+};
+
static struct gpio_keys_button archer_c60_v1_gpio_keys[] __initdata = {
{
.desc = "Reset button",
@@ -143,3 +181,45 @@ static void __init archer_c60_v1_setup(void)
MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V1, "ARCHER-C60-V1",
"TP-LINK Archer C60 v1", archer_c60_v1_setup);
+
+static void __init archer_c60_v2_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f01fb08);
+ u8 *art = (u8 *) KSEG1ADDR(0x1f7f0000);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(archer_c60_v2_leds_gpio),
+ archer_c60_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, ARCHER_C60_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(archer_c60_v1_gpio_keys),
+ archer_c60_v1_gpio_keys);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_mdio(1, 0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+
+ /* WAN port */
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_register_eth(0);
+
+ /* LAN ports */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_switch_data.phy_poll_mask |= BIT(4);
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + ARCHER_C60_V1_WMAC_CALDATA_OFFSET, mac);
+ ap91_pci_init(art + ARCHER_C60_V1_PCI_CALDATA_OFFSET, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_ARCHER_C60_V2, "ARCHER-C60-V2",
+ "TP-LINK Archer C60 v2", archer_c60_v2_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 6007b512aa..b61ed7abcd 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -48,6 +48,7 @@ enum ath79_mach_type {
ATH79_MACH_ARCHER_C58_V1, /* TP-LINK Archer C58 V1 board */
ATH79_MACH_ARCHER_C59_V1, /* TP-LINK Archer C59 V1 board */
ATH79_MACH_ARCHER_C60_V1, /* TP-LINK Archer C60 V1 board */
+ ATH79_MACH_ARCHER_C60_V2, /* TP-LINK Archer C60 V2 board */
ATH79_MACH_ARCHER_C7, /* TP-LINK Archer C7 board */
ATH79_MACH_ARCHER_C7_V2, /* TP-LINK Archer C7 V2 board */
ATH79_MACH_ARCHER_C7_V4, /* TP-LINK Archer C7 V4 board */
diff --git a/target/linux/ar71xx/generic/config-default b/target/linux/ar71xx/generic/config-default
index 088824d31d..6475d2281a 100644
--- a/target/linux/ar71xx/generic/config-default
+++ b/target/linux/ar71xx/generic/config-default
@@ -31,6 +31,7 @@ CONFIG_ATH79_MACH_ARCHER_C25_V1=y
CONFIG_ATH79_MACH_ARCHER_C58_V1=y
CONFIG_ATH79_MACH_ARCHER_C59_V1=y
CONFIG_ATH79_MACH_ARCHER_C60_V1=y
+CONFIG_ATH79_MACH_ARCHER_C60_V2=y
CONFIG_ATH79_MACH_ARCHER_C7=y
CONFIG_ATH79_MACH_ARDUINO_YUN=y
CONFIG_ATH79_MACH_AW_NR580=y
diff --git a/target/linux/ar71xx/image/generic-tp-link.mk b/target/linux/ar71xx/image/generic-tp-link.mk
index 48eed6b15b..9054f1c7da 100644
--- a/target/linux/ar71xx/image/generic-tp-link.mk
+++ b/target/linux/ar71xx/image/generic-tp-link.mk
@@ -62,6 +62,18 @@ define Device/archer-c60-v1
endef
TARGET_DEVICES += archer-c60-v1
+define Device/archer-c60-v2
+ $(Device/archer-c60-v1)
+ DEVICE_TITLE := TP-LINK Archer C60 v2
+ BOARDNAME := ARCHER-C60-V2
+ TPLINK_BOARD_ID := ARCHER-C60-V2
+ DEVICE_PROFILE := ARCHERC60V2
+ IMAGE_SIZE := 7808k
+ MTDPARTS := spi0.0:192k(u-boot)ro,7808k(firmware),128k(tplink)ro,64k(art)ro
+ SUPPORTED_DEVICES := archer-c60-v2
+endef
+TARGET_DEVICES += archer-c60-v2
+
define Device/archer-c5-v1
$(Device/tplink-16mlzma)
DEVICE_TITLE := TP-LINK Archer C5 v1