diff options
| author | John Crispin <blogic@openwrt.org> | 2014-08-07 14:41:19 +0000 |
|---|---|---|
| committer | John Crispin <blogic@openwrt.org> | 2014-08-07 14:41:19 +0000 |
| commit | a02de007a40b36d7b17071b0fac80bb06d4c46df (patch) | |
| tree | bfb3402e9f84d8126be6df24f5267033938e1053 /target | |
| parent | ff536dcd1ca51df92622d7e9216e4cd908f07837 (diff) | |
| download | upstream-a02de007a40b36d7b17071b0fac80bb06d4c46df.tar.gz upstream-a02de007a40b36d7b17071b0fac80bb06d4c46df.tar.bz2 upstream-a02de007a40b36d7b17071b0fac80bb06d4c46df.zip | |
ralink: add 3.14 support
Signed-off-by: John Crispin <blogic@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42040 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
66 files changed, 64992 insertions, 0 deletions
diff --git a/target/linux/ramips/mt7620a/config-3.14 b/target/linux/ramips/mt7620a/config-3.14 new file mode 100644 index 0000000000..1ec82aebee --- /dev/null +++ b/target/linux/ramips/mt7620a/config-3.14 @@ -0,0 +1,184 @@ +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_AT803X_PHY=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKEVT_RT3352=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLKSRC_OF=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_DEBUG_PINCTRL=y +CONFIG_DMA_NONCOHERENT=y +# CONFIG_DTB_MT7620A_EVAL is not set +CONFIG_DTB_RT_NONE=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK_8250 is not set +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_RALINK=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_MACH_CLKDEV=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=m +CONFIG_HZ_PERIODIC=y +CONFIG_ICPLUS_PHY=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INET_LRO=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_INTC=y +CONFIG_IRQ_WORK=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIPS=y +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MACHINE is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_O32_FP64_SUPPORT is not set +# CONFIG_MLX5_CORE is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND_MT7620=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_UIMAGE_SPLIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_RALINK=y +CONFIG_NET_RALINK_GSW_MT7620=y +CONFIG_NET_RALINK_MDIO=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_NLS=m +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PINCONF is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_RT2880=y +# CONFIG_PINCTRL_SINGLE is not set +# CONFIG_PREEMPT_RCU is not set +CONFIG_RALINK=y +CONFIG_RALINK_USBPHY=y +CONFIG_RALINK_WDT=y +CONFIG_RA_NAT_NONE=y +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_RESET_CONTROLLER=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RT288X=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SOC_MT7620=y +# CONFIG_SOC_MT7621 is not set +# CONFIG_SOC_RT288X is not set +# CONFIG_SOC_RT305X is not set +# CONFIG_SOC_RT3883 is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_RT2880=y +CONFIG_SWCONFIG=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_USB=m +CONFIG_USB_COMMON=m +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_PHY=y +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_USE_OF=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_ZBUD is not set +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/mt7620n/config-3.14 b/target/linux/ramips/mt7620n/config-3.14 new file mode 100644 index 0000000000..db95ddf264 --- /dev/null +++ b/target/linux/ramips/mt7620n/config-3.14 @@ -0,0 +1,176 @@ +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKEVT_RT3352=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLKSRC_OF=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_DEBUG_PINCTRL=y +CONFIG_DMA_NONCOHERENT=y +# CONFIG_DTB_MT7620A_EVAL is not set +CONFIG_DTB_RT_NONE=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK_8250 is not set +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_RALINK=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_MACH_CLKDEV=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=m +CONFIG_HZ_PERIODIC=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INET_LRO=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_INTC=y +CONFIG_IRQ_WORK=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIPS=y +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MACHINE is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_O32_FP64_SUPPORT is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_M25P80=y +# CONFIG_MTD_NAND_MT7620 is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_UIMAGE_SPLIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_RALINK=y +CONFIG_NET_RALINK_GSW_MT7620=y +CONFIG_NET_RALINK_MDIO=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_NLS=m +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_PAGEFLAGS_EXTENDED=y +# CONFIG_PCI is not set +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PINCONF is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_RT2880=y +# CONFIG_PINCTRL_SINGLE is not set +# CONFIG_PREEMPT_RCU is not set +CONFIG_RALINK=y +CONFIG_RALINK_USBPHY=y +CONFIG_RALINK_WDT=y +CONFIG_RA_NAT_NONE=y +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_RESET_CONTROLLER=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RT288X=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SOC_MT7620=y +# CONFIG_SOC_MT7621 is not set +# CONFIG_SOC_RT288X is not set +# CONFIG_SOC_RT305X is not set +# CONFIG_SOC_RT3883 is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_RT2880=y +CONFIG_SWCONFIG=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_USB=m +CONFIG_USB_COMMON=m +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_PHY=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_ZBUD is not set +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/mt7621/config-3.14 b/target/linux/ramips/mt7621/config-3.14 new file mode 100644 index 0000000000..cb00c5149d --- /dev/null +++ b/target/linux/ramips/mt7621/config-3.14 @@ -0,0 +1,237 @@ +# CONFIG_32B_DESC is not set +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_BOARD_SCACHE=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +# CONFIG_CEVT_GIC is not set +CONFIG_CEVT_R4K=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_MIPSR2_IRQ_EI=y +CONFIG_CPU_MIPSR2_IRQ_VI=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_DEBUG_PINCTRL=y +CONFIG_DMA_NONCOHERENT=y +# CONFIG_DTB_MT7621_EVAL is not set +CONFIG_DTB_RT_NONE=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK_8250 is not set +CONFIG_ESW_DOUBLE_VLAN_TAG=y +# CONFIG_GE1_MII_AN is not set +# CONFIG_GE1_MII_FORCE_100 is not set +# CONFIG_GE1_RGMII_AN is not set +CONFIG_GE1_RGMII_FORCE_1000=y +# CONFIG_GE1_RGMII_NONE is not set +# CONFIG_GE1_RVMII_FORCE_100 is not set +# CONFIG_GE1_TRGMII_FORCE_1200 is not set +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +# CONFIG_GPIO_MT7621 is not set +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_MACH_CLKDEV=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=m +CONFIG_HZ_PERIODIC=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_GIC=y +CONFIG_IRQ_WORK=y +# CONFIG_LAN_WAN_SUPPORT is not set +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIPS=y +CONFIG_MIPS_CMP=y +CONFIG_MIPS_CPU_SCACHE=y +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=6 +CONFIG_MIPS_L1_CACHE_SHIFT_6=y +# CONFIG_MIPS_MACHINE is not set +CONFIG_MIPS_MT=y +# CONFIG_MIPS_MT_DISABLED is not set +CONFIG_MIPS_MT_FPAFF=y +CONFIG_MIPS_MT_SMP=y +# CONFIG_MIPS_MT_SMTC is not set +# CONFIG_MIPS_O32_FP64_SUPPORT is not set +CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y +# CONFIG_MIPS_VPE_LOADER is not set +# CONFIG_MLX5_CORE is not set +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MT7621_ASIC=y +# CONFIG_MT7621_WDT is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_UIMAGE_SPLIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NET_FLOW_LIMIT=y +# CONFIG_NET_RALINK is not set +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_NLS=m +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +CONFIG_NR_CPUS=4 +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +CONFIG_PCI_DISABLE_COMMON_QUIRKS=y +CONFIG_PCI_DOMAINS=y +CONFIG_PDMA_NEW=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PINCONF is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_RT2880=y +# CONFIG_PINCTRL_SINGLE is not set +# CONFIG_PREEMPT_RCU is not set +CONFIG_RAETH=y +CONFIG_RAETH_CHECKSUM_OFFLOAD=y +# CONFIG_RAETH_GMAC2 is not set +# CONFIG_RAETH_HW_VLAN_RX is not set +# CONFIG_RAETH_HW_VLAN_TX is not set +# CONFIG_RAETH_LRO is not set +# CONFIG_RAETH_NAPI is not set +# CONFIG_RAETH_QDMA is not set +CONFIG_RAETH_SCATTER_GATHER_RX_DMA=y +# CONFIG_RAETH_SKB_RECYCLE_2K is not set +# CONFIG_RAETH_SPECIAL_TAG is not set +# CONFIG_RAETH_TSO is not set +CONFIG_RALINK=y +CONFIG_RALINK_MT7621=y +CONFIG_RALINK_USBPHY=y +# CONFIG_RALINK_WDT is not set +CONFIG_RA_NAT_NONE=y +# CONFIG_RA_NETWORK_TASKLET_BH is not set +CONFIG_RA_NETWORK_WORKQUEUE_BH=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RESET_CONTROLLER=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RT_3052_ESW=y +CONFIG_SCHED_SMT=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +CONFIG_SLUB_CPU_PARTIAL=y +CONFIG_SMP=y +CONFIG_SMP_UP=y +# CONFIG_SOC_MT7620 is not set +CONFIG_SOC_MT7621=y +# CONFIG_SOC_RT288X is not set +# CONFIG_SOC_RT305X is not set +# CONFIG_SOC_RT3883 is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_RT2880=y +CONFIG_STOP_MACHINE=y +CONFIG_SWCONFIG=y +CONFIG_SYNC_R4K=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_SYS_SUPPORTS_MIPS_CMP=y +CONFIG_SYS_SUPPORTS_MULTITHREADING=y +CONFIG_SYS_SUPPORTS_SCHED_SMT=y +CONFIG_SYS_SUPPORTS_SMP=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TREE_RCU=y +CONFIG_USB=m +CONFIG_USB_COMMON=m +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_MT7621_XHCI_PLATFORM=y +CONFIG_USB_PHY=y +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_USB_XHCI_HCD=m +CONFIG_USB_XHCI_PLATFORM=y +CONFIG_USE_OF=y +CONFIG_WAN_AT_P0=y +# CONFIG_WAN_AT_P4 is not set +CONFIG_WATCHDOG_CORE=y +CONFIG_WEAK_ORDERING=y +CONFIG_XPS=y +# CONFIG_ZBUD is not set +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/patches-3.14/0001-MIPS-ralink-add-verbose-pmu-info.patch b/target/linux/ramips/patches-3.14/0001-MIPS-ralink-add-verbose-pmu-info.patch new file mode 100644 index 0000000000..51094d59b2 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0001-MIPS-ralink-add-verbose-pmu-info.patch @@ -0,0 +1,64 @@ +From 453850d315070678245f61202ae343153589e5a6 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:16:50 +0100 +Subject: [PATCH 01/57] MIPS: ralink: add verbose pmu info + +Print the PMU and LDO settings on boot. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/mt7620.c | 26 ++++++++++++++++++++++++++ + 1 file changed, 26 insertions(+) + +diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c +index a3ad56c..5846817 100644 +--- a/arch/mips/ralink/mt7620.c ++++ b/arch/mips/ralink/mt7620.c +@@ -20,6 +20,22 @@ + + #include "common.h" + ++/* analog */ ++#define PMU0_CFG 0x88 ++#define PMU_SW_SET BIT(28) ++#define A_DCDC_EN BIT(24) ++#define A_SSC_PERI BIT(19) ++#define A_SSC_GEN BIT(18) ++#define A_SSC_M 0x3 ++#define A_SSC_S 16 ++#define A_DLY_M 0x7 ++#define A_DLY_S 8 ++#define A_VTUNE_M 0xff ++ ++/* digital */ ++#define PMU1_CFG 0x8C ++#define DIG_SW_SEL BIT(25) ++ + /* does the board have sdram or ddram */ + static int dram_type; + +@@ -339,6 +355,8 @@ void prom_soc_init(struct ralink_soc_info *soc_info) + u32 n1; + u32 rev; + u32 cfg0; ++ u32 pmu0; ++ u32 pmu1; + + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); + n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); +@@ -386,4 +404,12 @@ void prom_soc_init(struct ralink_soc_info *soc_info) + BUG(); + } + soc_info->mem_base = MT7620_DRAM_BASE; ++ ++ pmu0 = __raw_readl(sysc + PMU0_CFG); ++ pmu1 = __raw_readl(sysc + PMU1_CFG); ++ ++ pr_info("Analog PMU set to %s control\n", ++ (pmu0 & PMU_SW_SET) ? ("sw") : ("hw")); ++ pr_info("Digital PMU set to %s control\n", ++ (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); + } +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0002-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch b/target/linux/ramips/patches-3.14/0002-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch new file mode 100644 index 0000000000..92155d4f3a --- /dev/null +++ b/target/linux/ramips/patches-3.14/0002-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch @@ -0,0 +1,27 @@ +From 1751f28d4779df83cc793c9d7ff75485c0ceaa23 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 04:53:02 +0000 +Subject: [PATCH 02/57] MIPS: ralink: add a helper for reading the ECO version + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/include/asm/mach-ralink/mt7620.h | 5 +++++ + 1 file changed, 5 insertions(+) + +diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h +index 6f9b24f..7ff9290 100644 +--- a/arch/mips/include/asm/mach-ralink/mt7620.h ++++ b/arch/mips/include/asm/mach-ralink/mt7620.h +@@ -105,4 +105,9 @@ + #define MT7620_GPIO_MODE_EPHY BIT(15) + #define MT7620_GPIO_MODE_WDT BIT(22) + ++static inline int mt7620_get_eco(void) ++{ ++ return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK; ++} ++ + #endif +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0003-MIPS-ralink-add-rt_sysc_m32-helper.patch b/target/linux/ramips/patches-3.14/0003-MIPS-ralink-add-rt_sysc_m32-helper.patch new file mode 100644 index 0000000000..e254ac0cf8 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0003-MIPS-ralink-add-rt_sysc_m32-helper.patch @@ -0,0 +1,31 @@ +From 0f0f041cd6a05eb865e391155d3299bb55ff00e3 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 19 May 2013 00:42:23 +0200 +Subject: [PATCH 03/57] MIPS: ralink: add rt_sysc_m32 helper + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/include/asm/mach-ralink/ralink_regs.h | 7 +++++++ + 1 file changed, 7 insertions(+) + +diff --git a/arch/mips/include/asm/mach-ralink/ralink_regs.h b/arch/mips/include/asm/mach-ralink/ralink_regs.h +index 5a508f9..bd93014 100644 +--- a/arch/mips/include/asm/mach-ralink/ralink_regs.h ++++ b/arch/mips/include/asm/mach-ralink/ralink_regs.h +@@ -26,6 +26,13 @@ static inline u32 rt_sysc_r32(unsigned reg) + return __raw_readl(rt_sysc_membase + reg); + } + ++static inline void rt_sysc_m32(u32 clr, u32 set, unsigned reg) ++{ ++ u32 val = rt_sysc_r32(reg) & ~clr; ++ ++ __raw_writel(val | set, rt_sysc_membase + reg); ++} ++ + static inline void rt_memc_w32(u32 val, unsigned reg) + { + __raw_writel(val, rt_memc_membase + reg); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0004-MIPS-ralink-adds-a-bootrom-dumper-module.patch b/target/linux/ramips/patches-3.14/0004-MIPS-ralink-adds-a-bootrom-dumper-module.patch new file mode 100644 index 0000000000..88e0f52ef9 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0004-MIPS-ralink-adds-a-bootrom-dumper-module.patch @@ -0,0 +1,83 @@ +From af03898c74172ab16d610f3eeaa65f66401eb7db Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Tue, 21 May 2013 15:50:31 +0200 +Subject: [PATCH 04/57] MIPS: ralink: adds a bootrom dumper module + +This patch adds a trivial driver that allows userland to extract the bootrom of +a SoC via debugfs. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/Makefile | 2 ++ + arch/mips/ralink/bootrom.c | 48 ++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 50 insertions(+) + create mode 100644 arch/mips/ralink/bootrom.c + +diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile +index 98ae349..584a8d9 100644 +--- a/arch/mips/ralink/Makefile ++++ b/arch/mips/ralink/Makefile +@@ -17,4 +17,6 @@ obj-$(CONFIG_SOC_MT7620) += mt7620.o + + obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + ++obj-$(CONFIG_DEBUG_FS) += bootrom.o ++ + obj-y += dts/ +diff --git a/arch/mips/ralink/bootrom.c b/arch/mips/ralink/bootrom.c +new file mode 100644 +index 0000000..f926f6f +--- /dev/null ++++ b/arch/mips/ralink/bootrom.c +@@ -0,0 +1,48 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/debugfs.h> ++#include <linux/seq_file.h> ++ ++#define BOOTROM_OFFSET 0x10118000 ++#define BOOTROM_SIZE 0x8000 ++ ++static void __iomem *membase = (void __iomem*) KSEG1ADDR(BOOTROM_OFFSET); ++ ++static int bootrom_show(struct seq_file *s, void *unused) ++{ ++ seq_write(s, membase, BOOTROM_SIZE); ++ ++ return 0; ++} ++ ++static int bootrom_open(struct inode *inode, struct file *file) ++{ ++ return single_open(file, bootrom_show, NULL); ++} ++ ++static const struct file_operations bootrom_file_ops = { ++ .open = bootrom_open, ++ .read = seq_read, ++ .llseek = seq_lseek, ++ .release = single_release, ++}; ++ ++static int bootrom_setup(void) ++{ ++ if (!debugfs_create_file("bootrom", 0444, ++ NULL, NULL, &bootrom_file_ops)) { ++ pr_err("Failed to create bootrom debugfs file\n"); ++ ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++postcore_initcall(bootrom_setup); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0005-MIPS-ralink-add-illegal-access-driver.patch b/target/linux/ramips/patches-3.14/0005-MIPS-ralink-add-illegal-access-driver.patch new file mode 100644 index 0000000000..5c8414a7b6 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0005-MIPS-ralink-add-illegal-access-driver.patch @@ -0,0 +1,123 @@ +From 60999174904c731e55992a4087999bbd4e5f2051 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Thu, 16 May 2013 23:28:23 +0200 +Subject: [PATCH 05/57] MIPS: ralink: add illegal access driver + +these SoCs have a special irq that fires upon an illegal memmory access. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/Makefile | 2 + + arch/mips/ralink/ill_acc.c | 87 ++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 89 insertions(+) + create mode 100644 arch/mips/ralink/ill_acc.c + +diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile +index 584a8d9..fc57c16 100644 +--- a/arch/mips/ralink/Makefile ++++ b/arch/mips/ralink/Makefile +@@ -10,6 +10,8 @@ obj-y := prom.o of.o reset.o clk.o irq.o timer.o + + obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o + ++obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o ++ + obj-$(CONFIG_SOC_RT288X) += rt288x.o + obj-$(CONFIG_SOC_RT305X) += rt305x.o + obj-$(CONFIG_SOC_RT3883) += rt3883.o +diff --git a/arch/mips/ralink/ill_acc.c b/arch/mips/ralink/ill_acc.c +new file mode 100644 +index 0000000..4a3f696 +--- /dev/null ++++ b/arch/mips/ralink/ill_acc.c +@@ -0,0 +1,87 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/interrupt.h> ++#include <linux/of_platform.h> ++#include <linux/of_irq.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++ ++#define REG_ILL_ACC_ADDR 0x10 ++#define REG_ILL_ACC_TYPE 0x14 ++ ++#define ILL_INT_STATUS BIT(31) ++#define ILL_ACC_WRITE BIT(30) ++#define ILL_ACC_LEN_M 0xff ++#define ILL_ACC_OFF_M 0xf ++#define ILL_ACC_OFF_S 16 ++#define ILL_ACC_ID_M 0x7 ++#define ILL_ACC_ID_S 8 ++ ++#define DRV_NAME "ill_acc" ++ ++static const char *ill_acc_ids[] = { ++ "cpu", "dma", "ppe", "pdma rx","pdma tx", "pci/e", "wmac", "usb", ++}; ++ ++static irqreturn_t ill_acc_irq_handler(int irq, void *_priv) ++{ ++ struct device *dev = (struct device *) _priv; ++ u32 addr = rt_memc_r32(REG_ILL_ACC_ADDR); ++ u32 type = rt_memc_r32(REG_ILL_ACC_TYPE); ++ ++ dev_err(dev, "illegal %s access from %s - addr:0x%08x offset:%d len:%d\n", ++ (type & ILL_ACC_WRITE) ? ("write") : ("read"), ++ ill_acc_ids[(type >> ILL_ACC_ID_S) & ILL_ACC_ID_M], ++ addr, (type >> ILL_ACC_OFF_S) & ILL_ACC_OFF_M, ++ type & ILL_ACC_LEN_M); ++ ++ rt_memc_w32(REG_ILL_ACC_TYPE, REG_ILL_ACC_TYPE); ++ ++ return IRQ_HANDLED; ++} ++ ++static int __init ill_acc_of_setup(void) ++{ ++ struct platform_device *pdev; ++ struct device_node *np; ++ int irq; ++ ++ /* somehow this driver breaks on RT5350 */ ++ if (of_machine_is_compatible("ralink,rt5350-soc")) ++ return -EINVAL; ++ ++ np = of_find_compatible_node(NULL, NULL, "ralink,rt3050-memc"); ++ if (!np) ++ return -EINVAL; ++ ++ pdev = of_find_device_by_node(np); ++ if (!pdev) { ++ pr_err("%s: failed to lookup pdev\n", np->name); ++ return -EINVAL; ++ } ++ ++ irq = irq_of_parse_and_map(np, 0); ++ if (!irq) { ++ dev_err(&pdev->dev, "failed to get irq\n"); ++ return -EINVAL; ++ } ++ ++ if (request_irq(irq, ill_acc_irq_handler, 0, "ill_acc", &pdev->dev)) { ++ dev_err(&pdev->dev, "failed to request irq\n"); ++ return -EINVAL; ++ } ++ ++ rt_memc_w32(ILL_INT_STATUS, REG_ILL_ACC_TYPE); ++ ++ dev_info(&pdev->dev, "irq registered\n"); ++ ++ return 0; ++} ++ ++arch_initcall(ill_acc_of_setup); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0006-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch b/target/linux/ramips/patches-3.14/0006-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch new file mode 100644 index 0000000000..280f1074c4 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0006-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch @@ -0,0 +1,32 @@ +From 979ad9f0324ad8fa5eb4a00b57d9feb061aa3200 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 04:38:07 +0000 +Subject: [PATCH 06/57] MIPS: ralink: add missing clk_set_rate() to clk.c + +This function was missing causing allmod to fail. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/clk.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +diff --git a/arch/mips/ralink/clk.c b/arch/mips/ralink/clk.c +index 5d0983d..feb5a9b 100644 +--- a/arch/mips/ralink/clk.c ++++ b/arch/mips/ralink/clk.c +@@ -56,6 +56,12 @@ unsigned long clk_get_rate(struct clk *clk) + } + EXPORT_SYMBOL_GPL(clk_get_rate); + ++int clk_set_rate(struct clk *clk, unsigned long rate) ++{ ++ return -1; ++} ++EXPORT_SYMBOL_GPL(clk_set_rate); ++ + void __init plat_time_init(void) + { + struct clk *clk; +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0007-MIPS-ralink-add-support-for-MT7620n.patch b/target/linux/ramips/patches-3.14/0007-MIPS-ralink-add-support-for-MT7620n.patch new file mode 100644 index 0000000000..3606acbfed --- /dev/null +++ b/target/linux/ramips/patches-3.14/0007-MIPS-ralink-add-support-for-MT7620n.patch @@ -0,0 +1,73 @@ +From efc0f99cebcab21dbabcc634b9dbb963bbbbcab8 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:23:36 +0100 +Subject: [PATCH 07/57] MIPS: ralink: add support for MT7620n + +This is the small version of MT7620a. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/include/asm/mach-ralink/mt7620.h | 7 ++----- + arch/mips/ralink/mt7620.c | 19 ++++++++++++------- + 2 files changed, 14 insertions(+), 12 deletions(-) + +diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h +index 7ff9290..27b2fa9 100644 +--- a/arch/mips/include/asm/mach-ralink/mt7620.h ++++ b/arch/mips/include/asm/mach-ralink/mt7620.h +@@ -25,11 +25,8 @@ + #define SYSC_REG_CPLL_CONFIG0 0x54 + #define SYSC_REG_CPLL_CONFIG1 0x58 + +-#define MT7620N_CHIP_NAME0 0x33365452 +-#define MT7620N_CHIP_NAME1 0x20203235 +- +-#define MT7620A_CHIP_NAME0 0x3637544d +-#define MT7620A_CHIP_NAME1 0x20203032 ++#define MT7620_CHIP_NAME0 0x3637544d ++#define MT7620_CHIP_NAME1 0x20203032 + + #define SYSCFG0_XTAL_FREQ_SEL BIT(6) + +diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c +index 5846817..4fdee17 100644 +--- a/arch/mips/ralink/mt7620.c ++++ b/arch/mips/ralink/mt7620.c +@@ -357,22 +357,27 @@ void prom_soc_init(struct ralink_soc_info *soc_info) + u32 cfg0; + u32 pmu0; + u32 pmu1; ++ u32 bga; + + n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); + n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); ++ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); ++ bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK; + +- if (n0 == MT7620N_CHIP_NAME0 && n1 == MT7620N_CHIP_NAME1) { +- name = "MT7620N"; +- soc_info->compatible = "ralink,mt7620n-soc"; +- } else if (n0 == MT7620A_CHIP_NAME0 && n1 == MT7620A_CHIP_NAME1) { ++ if (n0 != MT7620_CHIP_NAME0 || n1 != MT7620_CHIP_NAME1) ++ panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1); ++ ++ if (bga) { + name = "MT7620A"; + soc_info->compatible = "ralink,mt7620a-soc"; + } else { +- panic("mt7620: unknown SoC, n0:%08x n1:%08x", n0, n1); ++ name = "MT7620N"; ++ soc_info->compatible = "ralink,mt7620n-soc"; ++#ifdef CONFIG_PCI ++ panic("mt7620n is only supported for non pci kernels"); ++#endif + } + +- rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); +- + snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, + "Ralink %s ver:%u eco:%u", + name, +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0008-MIPS-ralink-allow-manual-memory-override.patch b/target/linux/ramips/patches-3.14/0008-MIPS-ralink-allow-manual-memory-override.patch new file mode 100644 index 0000000000..bbbe7aa860 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0008-MIPS-ralink-allow-manual-memory-override.patch @@ -0,0 +1,50 @@ +From 071e97587a291d3a5bbd614a425f46b7f90310aa Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 04:40:48 +0000 +Subject: [PATCH 08/57] MIPS: ralink: allow manual memory override + +RT5350 relies on the bootloader setting up the memc correctly. +On sme boards the setup is incorrect leading to 32 MB being available but only 16 being recognized. Allow these boards to manually override the memory range +. +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/of.c | 16 +++++++++++++++- + 1 file changed, 15 insertions(+), 1 deletion(-) + +diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c +index eccc552..1b81e8f 100644 +--- a/arch/mips/ralink/of.c ++++ b/arch/mips/ralink/of.c +@@ -78,6 +78,17 @@ void __init device_tree_init(void) + free_bootmem(base, size); + } + ++static int memory_dtb; ++ ++static int __init early_init_dt_find_memory(unsigned long node, const char *uname, ++ int depth, void *data) ++{ ++ if (depth == 1 && !strcmp(uname, "memory@0")) ++ memory_dtb = 1; ++ ++ return 0; ++} ++ + void __init plat_mem_setup(void) + { + set_io_port_base(KSEG1); +@@ -88,7 +99,10 @@ void __init plat_mem_setup(void) + */ + __dt_setup_arch(&__dtb_start); + +- if (soc_info.mem_size) ++ of_scan_flat_dt(early_init_dt_find_memory, NULL); ++ if (memory_dtb) ++ of_scan_flat_dt(early_init_dt_scan_memory, NULL); ++ else if (soc_info.mem_size) + add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M, + BOOT_MEM_RAM); + else +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0009-MIPS-ralink-define-the-wmac-clock-on-mt7620.patch b/target/linux/ramips/patches-3.14/0009-MIPS-ralink-define-the-wmac-clock-on-mt7620.patch new file mode 100644 index 0000000000..17ba702fdd --- /dev/null +++ b/target/linux/ramips/patches-3.14/0009-MIPS-ralink-define-the-wmac-clock-on-mt7620.patch @@ -0,0 +1,25 @@ +From 1cb19fe02c830e278b91498edea09fbda37c4a21 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 10:13:43 +0100 +Subject: [PATCH 09/57] MIPS: ralink: define the wmac clock on mt7620 + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/mt7620.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c +index 4fdee17..c883973 100644 +--- a/arch/mips/ralink/mt7620.c ++++ b/arch/mips/ralink/mt7620.c +@@ -336,6 +336,7 @@ void __init ralink_clk_init(void) + ralink_clk_add("10000500.uart", periph_rate); + ralink_clk_add("10000b00.spi", sys_rate); + ralink_clk_add("10000c00.uartlite", periph_rate); ++ ralink_clk_add("10180000.wmac", xtal_rate); + } + + void __init ralink_of_remap(void) +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0010-MIPS-ralink-define-the-wmac-clock-on-rt3883.patch b/target/linux/ramips/patches-3.14/0010-MIPS-ralink-define-the-wmac-clock-on-rt3883.patch new file mode 100644 index 0000000000..551bd2a8eb --- /dev/null +++ b/target/linux/ramips/patches-3.14/0010-MIPS-ralink-define-the-wmac-clock-on-rt3883.patch @@ -0,0 +1,25 @@ +From 1f17cf131fc2ae7fa2651dbe6a622dd125939718 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 10:14:30 +0100 +Subject: [PATCH 10/57] MIPS: ralink: define the wmac clock on rt3883 + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/rt3883.c | 1 + + 1 file changed, 1 insertion(+) + +diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c +index b474ac2..58b5b9f 100644 +--- a/arch/mips/ralink/rt3883.c ++++ b/arch/mips/ralink/rt3883.c +@@ -204,6 +204,7 @@ void __init ralink_clk_init(void) + ralink_clk_add("10000b00.spi", sys_rate); + ralink_clk_add("10000c00.uartlite", 40000000); + ralink_clk_add("10100000.ethernet", sys_rate); ++ ralink_clk_add("10180000.wmac", 40000000); + } + + void __init ralink_of_remap(void) +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0011-MIPS-ralink-add-rt2880-wmac-clock.patch b/target/linux/ramips/patches-3.14/0011-MIPS-ralink-add-rt2880-wmac-clock.patch new file mode 100644 index 0000000000..fd8c28a7f7 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0011-MIPS-ralink-add-rt2880-wmac-clock.patch @@ -0,0 +1,34 @@ +From bf4f5250117cd65a78903b8ce302499806416ed1 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 4 Aug 2014 09:52:22 +0200 +Subject: [PATCH 11/57] MIPS: ralink: add rt2880 wmac clock + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/rt288x.c | 3 ++- + 1 file changed, 2 insertions(+), 1 deletion(-) + +diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c +index f87de1a..90e8934 100644 +--- a/arch/mips/ralink/rt288x.c ++++ b/arch/mips/ralink/rt288x.c +@@ -76,7 +76,7 @@ struct ralink_pinmux rt_gpio_pinmux = { + + void __init ralink_clk_init(void) + { +- unsigned long cpu_rate; ++ unsigned long cpu_rate, wmac_rate = 40000000; + u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); + t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); + +@@ -101,6 +101,7 @@ void __init ralink_clk_init(void) + ralink_clk_add("300500.uart", cpu_rate / 2); + ralink_clk_add("300c00.uartlite", cpu_rate / 2); + ralink_clk_add("400000.ethernet", cpu_rate / 2); ++ ralink_clk_add("480000.wmac", wmac_rate); + } + + void __init ralink_of_remap(void) +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0012-MIPS-ralink-add-MT7621-support.patch b/target/linux/ramips/patches-3.14/0012-MIPS-ralink-add-MT7621-support.patch new file mode 100644 index 0000000000..ef077e1ed0 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0012-MIPS-ralink-add-MT7621-support.patch @@ -0,0 +1,751 @@ +From c8c69923236f2f3f184ddcc7eb41c113b5cc3223 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 10:57:40 +0100 +Subject: [PATCH 12/57] MIPS: ralink: add MT7621 support + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/include/asm/gic.h | 4 + + arch/mips/include/asm/mach-ralink/irq.h | 9 + + arch/mips/include/asm/mach-ralink/mt7621.h | 39 ++++ + arch/mips/kernel/vmlinux.lds.S | 1 + + arch/mips/ralink/Kconfig | 18 ++ + arch/mips/ralink/Makefile | 7 +- + arch/mips/ralink/Platform | 5 + + arch/mips/ralink/irq-gic.c | 271 ++++++++++++++++++++++++++++ + arch/mips/ralink/malta-amon.c | 81 +++++++++ + arch/mips/ralink/mt7621.c | 183 +++++++++++++++++++ + 10 files changed, 617 insertions(+), 1 deletion(-) + create mode 100644 arch/mips/include/asm/mach-ralink/irq.h + create mode 100644 arch/mips/include/asm/mach-ralink/mt7621.h + create mode 100644 arch/mips/ralink/irq-gic.c + create mode 100644 arch/mips/ralink/malta-amon.c + create mode 100644 arch/mips/ralink/mt7621.c + +diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h +index b2e3e93..29fba50 100644 +--- a/arch/mips/include/asm/gic.h ++++ b/arch/mips/include/asm/gic.h +@@ -19,7 +19,11 @@ + #define GIC_TRIG_EDGE 1 + #define GIC_TRIG_LEVEL 0 + ++#define GIC_NUM_INTRS 64 ++ ++#ifndef GIC_NUM_INTRS + #define GIC_NUM_INTRS (24 + NR_CPUS * 2) ++#endif + + #define MSK(n) ((1 << (n)) - 1) + #define REG32(addr) (*(volatile unsigned int *) (addr)) +diff --git a/arch/mips/include/asm/mach-ralink/irq.h b/arch/mips/include/asm/mach-ralink/irq.h +new file mode 100644 +index 0000000..4321865 +--- /dev/null ++++ b/arch/mips/include/asm/mach-ralink/irq.h +@@ -0,0 +1,9 @@ ++#ifndef __ASM_MACH_RALINK_IRQ_H ++#define __ASM_MACH_RALINK_IRQ_H ++ ++#define GIC_NUM_INTRS 64 ++#define NR_IRQS 256 ++ ++#include_next <irq.h> ++ ++#endif +diff --git a/arch/mips/include/asm/mach-ralink/mt7621.h b/arch/mips/include/asm/mach-ralink/mt7621.h +new file mode 100644 +index 0000000..21c8dc2 +--- /dev/null ++++ b/arch/mips/include/asm/mach-ralink/mt7621.h +@@ -0,0 +1,39 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * Parts of this file are based on Ralink's 2.6.21 BSP ++ * ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#ifndef _MT7621_REGS_H_ ++#define _MT7621_REGS_H_ ++ ++#define MT7621_SYSC_BASE 0x1E000000 ++ ++#define SYSC_REG_CHIP_NAME0 0x00 ++#define SYSC_REG_CHIP_NAME1 0x04 ++#define SYSC_REG_CHIP_REV 0x0c ++#define SYSC_REG_SYSTEM_CONFIG0 0x10 ++#define SYSC_REG_SYSTEM_CONFIG1 0x14 ++ ++#define CHIP_REV_PKG_MASK 0x1 ++#define CHIP_REV_PKG_SHIFT 16 ++#define CHIP_REV_VER_MASK 0xf ++#define CHIP_REV_VER_SHIFT 8 ++#define CHIP_REV_ECO_MASK 0xf ++ ++#define MT7621_DRAM_BASE 0x0 ++#define MT7621_DDR2_SIZE_MIN 32 ++#define MT7621_DDR2_SIZE_MAX 256 ++ ++#define MT7621_CHIP_NAME0 0x3637544D ++#define MT7621_CHIP_NAME1 0x20203132 ++ ++#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) ++ ++#endif +diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S +index 3b46f7c..fa925b7 100644 +--- a/arch/mips/kernel/vmlinux.lds.S ++++ b/arch/mips/kernel/vmlinux.lds.S +@@ -51,6 +51,7 @@ SECTIONS + /* read-only */ + _text = .; /* Text and read-only data */ + .text : { ++ /*. = . + 0x8000; */ + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT +diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig +index 1bfd1c1..6a04360 100644 +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -7,6 +7,11 @@ config CLKEVT_RT3352 + select CLKSRC_OF + select CLKSRC_MMIO + ++config IRQ_INTC ++ bool ++ default y ++ depends on !SOC_MT7621 ++ + choice + prompt "Ralink SoC selection" + default SOC_RT305X +@@ -34,6 +39,15 @@ choice + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI + ++ config SOC_MT7621 ++ bool "MT7621" ++ select MIPS_CPU_SCACHE ++ select SYS_SUPPORTS_MULTITHREADING ++ select SYS_SUPPORTS_SMP ++ select SYS_SUPPORTS_MIPS_CMP ++ select IRQ_GIC ++ select HW_HAS_PCI ++ + endchoice + + choice +@@ -61,6 +75,10 @@ choice + bool "MT7620A eval kit" + depends on SOC_MT7620 + ++ config DTB_MT7621_EVAL ++ bool "MT7621 eval kit" ++ depends on SOC_MT7621 ++ + endchoice + + endif +diff --git a/arch/mips/ralink/Makefile b/arch/mips/ralink/Makefile +index fc57c16..ad18cdf 100644 +--- a/arch/mips/ralink/Makefile ++++ b/arch/mips/ralink/Makefile +@@ -6,16 +6,21 @@ + # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> + # Copyright (C) 2013 John Crispin <blogic@openwrt.org> + +-obj-y := prom.o of.o reset.o clk.o irq.o timer.o ++obj-y := prom.o of.o reset.o clk.o timer.o + + obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o + + obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o + ++obj-$(CONFIG_IRQ_INTC) += irq.o ++obj-$(CONFIG_IRQ_GIC) += irq-gic.o ++obj-$(CONFIG_MIPS_MT_SMP) += malta-amon.o ++ + obj-$(CONFIG_SOC_RT288X) += rt288x.o + obj-$(CONFIG_SOC_RT305X) += rt305x.o + obj-$(CONFIG_SOC_RT3883) += rt3883.o + obj-$(CONFIG_SOC_MT7620) += mt7620.o ++obj-$(CONFIG_SOC_MT7621) += mt7621.o + + obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +diff --git a/arch/mips/ralink/Platform b/arch/mips/ralink/Platform +index 6d9c8c4..6095fcc 100644 +--- a/arch/mips/ralink/Platform ++++ b/arch/mips/ralink/Platform +@@ -27,3 +27,8 @@ cflags-$(CONFIG_SOC_RT3883) += -I$(srctree)/arch/mips/include/asm/mach-ralink/rt + # + load-$(CONFIG_SOC_MT7620) += 0xffffffff80000000 + cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7620 ++ ++# Ralink MT7621 ++# ++load-$(CONFIG_SOC_MT7621) += 0xffffffff80001000 ++cflags-$(CONFIG_SOC_MT7621) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621 +diff --git a/arch/mips/ralink/irq-gic.c b/arch/mips/ralink/irq-gic.c +new file mode 100644 +index 0000000..0122d42 +--- /dev/null ++++ b/arch/mips/ralink/irq-gic.c +@@ -0,0 +1,271 @@ ++#include <linux/init.h> ++#include <linux/sched.h> ++#include <linux/slab.h> ++#include <linux/interrupt.h> ++#include <linux/kernel_stat.h> ++#include <linux/hardirq.h> ++#include <linux/preempt.h> ++#include <linux/irqdomain.h> ++#include <linux/of_platform.h> ++#include <linux/of_address.h> ++#include <linux/of_irq.h> ++ ++#include <asm/irq_cpu.h> ++#include <asm/mipsregs.h> ++ ++#include <asm/irq.h> ++#include <asm/setup.h> ++ ++#include <asm/gic.h> ++#include <asm/gcmpregs.h> ++ ++#include <asm/mach-ralink/mt7621.h> ++ ++unsigned long _gcmp_base; ++static int gic_resched_int_base = 56; ++static int gic_call_int_base = 60; ++static struct irq_chip *irq_gic; ++static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS]; ++ ++#if defined(CONFIG_MIPS_MT_SMP) ++static int gic_resched_int_base; ++static int gic_call_int_base; ++ ++#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu)) ++#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu)) ++ ++static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) ++{ ++ scheduler_ipi(); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t ++ipi_call_interrupt(int irq, void *dev_id) ++{ ++ smp_call_function_interrupt(); ++ ++ return IRQ_HANDLED; ++} ++ ++static struct irqaction irq_resched = { ++ .handler = ipi_resched_interrupt, ++ .flags = IRQF_DISABLED|IRQF_PERCPU, ++ .name = "ipi resched" ++}; ++ ++static struct irqaction irq_call = { ++ .handler = ipi_call_interrupt, ++ .flags = IRQF_DISABLED|IRQF_PERCPU, ++ .name = "ipi call" ++}; ++ ++#endif ++ ++static void __init ++gic_fill_map(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) { ++ gic_intr_map[i].cpunum = 0; ++ gic_intr_map[i].pin = GIC_CPU_INT0; ++ gic_intr_map[i].polarity = GIC_POL_POS; ++ gic_intr_map[i].trigtype = GIC_TRIG_LEVEL; ++ gic_intr_map[i].flags = GIC_FLAG_IPI; ++ } ++ ++#if defined(CONFIG_MIPS_MT_SMP) ++ { ++ int cpu; ++ ++ gic_call_int_base = ARRAY_SIZE(gic_intr_map) - nr_cpu_ids; ++ gic_resched_int_base = gic_call_int_base - nr_cpu_ids; ++ ++ i = gic_resched_int_base; ++ ++ for (cpu = 0; cpu < nr_cpu_ids; cpu++) { ++ gic_intr_map[i + cpu].cpunum = cpu; ++ gic_intr_map[i + cpu].pin = GIC_CPU_INT1; ++ gic_intr_map[i + cpu].trigtype = GIC_TRIG_EDGE; ++ ++ gic_intr_map[i + cpu + nr_cpu_ids].cpunum = cpu; ++ gic_intr_map[i + cpu + nr_cpu_ids].pin = GIC_CPU_INT2; ++ gic_intr_map[i + cpu + nr_cpu_ids].trigtype = GIC_TRIG_EDGE; ++ } ++ } ++#endif ++} ++ ++void ++gic_irq_ack(struct irq_data *d) ++{ ++ int irq = (d->irq - gic_irq_base); ++ ++ GIC_CLR_INTR_MASK(irq); ++ ++ if (gic_irq_flags[irq] & GIC_TRIG_EDGE) ++ GICWRITE(GIC_REG(SHARED, GIC_SH_WEDGE), irq); ++} ++ ++void ++gic_finish_irq(struct irq_data *d) ++{ ++ GIC_SET_INTR_MASK(d->irq - gic_irq_base); ++} ++ ++void __init ++gic_platform_init(int irqs, struct irq_chip *irq_controller) ++{ ++ irq_gic = irq_controller; ++} ++ ++static void ++gic_irqdispatch(void) ++{ ++ unsigned int irq = gic_get_int(); ++ ++ if (likely(irq < GIC_NUM_INTRS)) ++ do_IRQ(MIPS_GIC_IRQ_BASE + irq); ++ else { ++ pr_err("Spurious GIC Interrupt!\n"); ++ spurious_interrupt(); ++ } ++ ++} ++ ++static void ++vi_timer_irqdispatch(void) ++{ ++ do_IRQ(cp0_compare_irq); ++} ++ ++#if defined(CONFIG_MIPS_MT_SMP) ++unsigned int ++plat_ipi_call_int_xlate(unsigned int cpu) ++{ ++ return GIC_CALL_INT(cpu); ++} ++ ++unsigned int ++plat_ipi_resched_int_xlate(unsigned int cpu) ++{ ++ return GIC_RESCHED_INT(cpu); ++} ++#endif ++ ++asmlinkage void ++plat_irq_dispatch(void) ++{ ++ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; ++ ++ if (unlikely(!pending)) { ++ pr_err("Spurious CP0 Interrupt!\n"); ++ spurious_interrupt(); ++ } else { ++ if (pending & CAUSEF_IP7) ++ do_IRQ(cp0_compare_irq); ++ ++ if (pending & (CAUSEF_IP4 | CAUSEF_IP3 | CAUSEF_IP2)) ++ gic_irqdispatch(); ++ } ++} ++ ++unsigned int __cpuinit ++get_c0_compare_int(void) ++{ ++ return CP0_LEGACY_COMPARE_IRQ; ++} ++ ++static int ++gic_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) ++{ ++ irq_set_chip_and_handler(irq, irq_gic, ++#if defined(CONFIG_MIPS_MT_SMP) ++ (hw >= gic_resched_int_base) ? ++ handle_percpu_irq : ++#endif ++ handle_level_irq); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops irq_domain_ops = { ++ .xlate = irq_domain_xlate_onecell, ++ .map = gic_map, ++}; ++ ++static int __init ++of_gic_init(struct device_node *node, ++ struct device_node *parent) ++{ ++ struct irq_domain *domain; ++ struct resource gcmp = { 0 }, gic = { 0 }; ++ unsigned int gic_rev; ++ int i; ++ ++ if (of_address_to_resource(node, 0, &gic)) ++ panic("Failed to get gic memory range"); ++ if (request_mem_region(gic.start, resource_size(&gic), ++ gic.name) < 0) ++ panic("Failed to request gic memory"); ++ if (of_address_to_resource(node, 2, &gcmp)) ++ panic("Failed to get gic memory range"); ++ if (request_mem_region(gcmp.start, resource_size(&gcmp), ++ gcmp.name) < 0) ++ panic("Failed to request gcmp memory"); ++ ++ _gcmp_base = (unsigned long) ioremap_nocache(gcmp.start, resource_size(&gcmp)); ++ if (!_gcmp_base) ++ panic("Failed to remap gcmp memory\n"); ++ ++ if ((GCMPGCB(GCMPB) & GCMP_GCB_GCMPB_GCMPBASE_MSK) != gcmp.start) ++ panic("Failed to find gcmp core\n"); ++ ++ /* tell the gcmp where to find the gic */ ++ GCMPGCB(GICBA) = gic.start | GCMP_GCB_GICBA_EN_MSK; ++ gic_present = 1; ++ if (cpu_has_vint) { ++ set_vi_handler(2, gic_irqdispatch); ++ set_vi_handler(3, gic_irqdispatch); ++ set_vi_handler(4, gic_irqdispatch); ++ set_vi_handler(7, vi_timer_irqdispatch); ++ } ++ ++ gic_fill_map(); ++ ++ gic_init(gic.start, resource_size(&gic), gic_intr_map, ++ ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); ++ ++ GICREAD(GIC_REG(SHARED, GIC_SH_REVISIONID), gic_rev); ++ pr_info("gic: revision %d.%d\n", (gic_rev >> 8) & 0xff, gic_rev & 0xff); ++ ++ domain = irq_domain_add_legacy(node, GIC_NUM_INTRS, MIPS_GIC_IRQ_BASE, ++ 0, &irq_domain_ops, NULL); ++ if (!domain) ++ panic("Failed to add irqdomain"); ++ ++#if defined(CONFIG_MIPS_MT_SMP) ++ for (i = 0; i < nr_cpu_ids; i++) { ++ setup_irq(MIPS_GIC_IRQ_BASE + GIC_RESCHED_INT(i), &irq_resched); ++ setup_irq(MIPS_GIC_IRQ_BASE + GIC_CALL_INT(i), &irq_call); ++ } ++#endif ++ ++ change_c0_status(ST0_IM, STATUSF_IP7 | STATUSF_IP4 | STATUSF_IP3 | ++ STATUSF_IP2); ++ return 0; ++} ++ ++static struct of_device_id __initdata of_irq_ids[] = { ++ { .compatible = "mti,cpu-interrupt-controller", .data = mips_cpu_intc_init }, ++ { .compatible = "ralink,mt7621-gic", .data = of_gic_init }, ++ {}, ++}; ++ ++void __init ++arch_init_irq(void) ++{ ++ of_irq_init(of_irq_ids); ++} +diff --git a/arch/mips/ralink/malta-amon.c b/arch/mips/ralink/malta-amon.c +new file mode 100644 +index 0000000..1e47844 +--- /dev/null ++++ b/arch/mips/ralink/malta-amon.c +@@ -0,0 +1,81 @@ ++/* ++ * Copyright (C) 2007 MIPS Technologies, Inc. ++ * All rights reserved. ++ ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ * ++ * Arbitrary Monitor interface ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/smp.h> ++ ++#include <asm/addrspace.h> ++#include <asm/mips-boards/launch.h> ++#include <asm/mipsmtregs.h> ++ ++int amon_cpu_avail(int cpu) ++{ ++ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); ++ ++ if (cpu < 0 || cpu >= NCPULAUNCH) { ++ pr_debug("avail: cpu%d is out of range\n", cpu); ++ return 0; ++ } ++ ++ launch += cpu; ++ if (!(launch->flags & LAUNCH_FREADY)) { ++ pr_debug("avail: cpu%d is not ready\n", cpu); ++ return 0; ++ } ++ if (launch->flags & (LAUNCH_FGO|LAUNCH_FGONE)) { ++ pr_debug("avail: too late.. cpu%d is already gone\n", cpu); ++ return 0; ++ } ++ ++ return 1; ++} ++ ++void amon_cpu_start(int cpu, ++ unsigned long pc, unsigned long sp, ++ unsigned long gp, unsigned long a0) ++{ ++ volatile struct cpulaunch *launch = ++ (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); ++ ++ if (!amon_cpu_avail(cpu)) ++ return; ++ if (cpu == smp_processor_id()) { ++ pr_debug("launch: I am cpu%d!\n", cpu); ++ return; ++ } ++ launch += cpu; ++ ++ pr_debug("launch: starting cpu%d\n", cpu); ++ ++ launch->pc = pc; ++ launch->gp = gp; ++ launch->sp = sp; ++ launch->a0 = a0; ++ ++ smp_wmb(); /* Target must see parameters before go */ ++ launch->flags |= LAUNCH_FGO; ++ smp_wmb(); /* Target must see go before we poll */ ++ ++ while ((launch->flags & LAUNCH_FGONE) == 0) ++ ; ++ smp_rmb(); /* Target will be updating flags soon */ ++ pr_debug("launch: cpu%d gone!\n", cpu); ++} +diff --git a/arch/mips/ralink/mt7621.c b/arch/mips/ralink/mt7621.c +new file mode 100644 +index 0000000..2aac87c +--- /dev/null ++++ b/arch/mips/ralink/mt7621.c +@@ -0,0 +1,183 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * Parts of this file are based on Ralink's 2.6.21 BSP ++ * ++ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <asm/gcmpregs.h> ++ ++#include <asm/mipsregs.h> ++#include <asm/smp-ops.h> ++#include <asm/mach-ralink/ralink_regs.h> ++#include <asm/mach-ralink/mt7621.h> ++ ++#include <pinmux.h> ++ ++#include "common.h" ++ ++#define SYSC_REG_SYSCFG 0x10 ++#define SYSC_REG_CPLL_CLKCFG0 0x2c ++#define SYSC_REG_CUR_CLK_STS 0x44 ++#define CPU_CLK_SEL (BIT(30) | BIT(31)) ++ ++#define MT7621_GPIO_MODE_UART1 1 ++#define MT7621_GPIO_MODE_I2C 2 ++#define MT7621_GPIO_MODE_UART2 3 ++#define MT7621_GPIO_MODE_UART3 5 ++#define MT7621_GPIO_MODE_JTAG 7 ++#define MT7621_GPIO_MODE_WDT_MASK 0x3 ++#define MT7621_GPIO_MODE_WDT_SHIFT 8 ++#define MT7621_GPIO_MODE_WDT_GPIO 1 ++#define MT7621_GPIO_MODE_PCIE_RST 0 ++#define MT7621_GPIO_MODE_PCIE_REF 2 ++#define MT7621_GPIO_MODE_PCIE_MASK 0x3 ++#define MT7621_GPIO_MODE_PCIE_SHIFT 10 ++#define MT7621_GPIO_MODE_PCIE_GPIO 1 ++#define MT7621_GPIO_MODE_MDIO 12 ++#define MT7621_GPIO_MODE_RGMII1 14 ++#define MT7621_GPIO_MODE_RGMII2 15 ++#define MT7621_GPIO_MODE_SPI_MASK 0x3 ++#define MT7621_GPIO_MODE_SPI_SHIFT 16 ++#define MT7621_GPIO_MODE_SPI_GPIO 1 ++#define MT7621_GPIO_MODE_SDHCI_MASK 0x3 ++#define MT7621_GPIO_MODE_SDHCI_SHIFT 18 ++#define MT7621_GPIO_MODE_SDHCI_GPIO 1 ++ ++static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) }; ++static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) }; ++static struct rt2880_pmx_func uart3_grp[] = { FUNC("uart3", 0, 5, 4) }; ++static struct rt2880_pmx_func uart2_grp[] = { FUNC("uart2", 0, 9, 4) }; ++static struct rt2880_pmx_func jtag_grp[] = { FUNC("jtag", 0, 13, 5) }; ++static struct rt2880_pmx_func wdt_grp[] = { ++ FUNC("wdt rst", 0, 18, 1), ++ FUNC("wdt refclk", 2, 18, 1), ++}; ++static struct rt2880_pmx_func pcie_rst_grp[] = { ++ FUNC("pcie rst", MT7621_GPIO_MODE_PCIE_RST, 19, 1), ++ FUNC("pcie refclk", MT7621_GPIO_MODE_PCIE_REF, 19, 1) ++}; ++static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 20, 2) }; ++static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 22, 12) }; ++static struct rt2880_pmx_func spi_grp[] = { ++ FUNC("spi", 0, 34, 7), ++ FUNC("nand", 2, 34, 8), ++}; ++static struct rt2880_pmx_func sdhci_grp[] = { ++ FUNC("sdhci", 0, 41, 8), ++ FUNC("nand", 2, 41, 8), ++}; ++static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 49, 12) }; ++ ++static struct rt2880_pmx_group mt7621_pinmux_data[] = { ++ GRP("uart1", uart1_grp, 1, MT7621_GPIO_MODE_UART1), ++ GRP("i2c", i2c_grp, 1, MT7621_GPIO_MODE_I2C), ++ GRP("uart3", uart2_grp, 1, MT7621_GPIO_MODE_UART2), ++ GRP("uart2", uart3_grp, 1, MT7621_GPIO_MODE_UART3), ++ GRP("jtag", jtag_grp, 1, MT7621_GPIO_MODE_JTAG), ++ GRP_G("wdt", wdt_grp, MT7621_GPIO_MODE_WDT_MASK, ++ MT7621_GPIO_MODE_WDT_GPIO, MT7621_GPIO_MODE_WDT_SHIFT), ++ GRP_G("pcie", pcie_rst_grp, MT7621_GPIO_MODE_PCIE_MASK, ++ MT7621_GPIO_MODE_PCIE_GPIO, MT7621_GPIO_MODE_PCIE_SHIFT), ++ GRP("mdio", mdio_grp, 1, MT7621_GPIO_MODE_MDIO), ++ GRP("rgmii2", rgmii2_grp, 1, MT7621_GPIO_MODE_RGMII2), ++ GRP_G("spi", spi_grp, MT7621_GPIO_MODE_SPI_MASK, ++ MT7621_GPIO_MODE_SPI_GPIO, MT7621_GPIO_MODE_SPI_SHIFT), ++ GRP_G("sdhci", sdhci_grp, MT7621_GPIO_MODE_SDHCI_MASK, ++ MT7621_GPIO_MODE_SDHCI_GPIO, MT7621_GPIO_MODE_SDHCI_SHIFT), ++ GRP("rgmii1", rgmii1_grp, 1, MT7621_GPIO_MODE_RGMII1), ++ { 0 } ++}; ++ ++void __init ralink_clk_init(void) ++{ ++ int cpu_fdiv = 0; ++ int cpu_ffrac = 0; ++ int fbdiv = 0; ++ u32 clk_sts, syscfg; ++ u8 clk_sel = 0, xtal_mode; ++ u32 cpu_clk; ++ ++ if ((rt_sysc_r32(SYSC_REG_CPLL_CLKCFG0) & CPU_CLK_SEL) != 0) ++ clk_sel = 1; ++ ++ switch (clk_sel) { ++ case 0: ++ clk_sts = rt_sysc_r32(SYSC_REG_CUR_CLK_STS); ++ cpu_fdiv = ((clk_sts >> 8) & 0x1F); ++ cpu_ffrac = (clk_sts & 0x1F); ++ cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000; ++ break; ++ ++ case 1: ++ fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1; ++ syscfg = rt_sysc_r32(SYSC_REG_SYSCFG); ++ xtal_mode = (syscfg >> 6) & 0x7; ++ if(xtal_mode >= 6) { //25Mhz Xtal ++ cpu_clk = 25 * fbdiv * 1000 * 1000; ++ } else if(xtal_mode >=3) { //40Mhz Xtal ++ cpu_clk = 40 * fbdiv * 1000 * 1000; ++ } else { // 20Mhz Xtal ++ cpu_clk = 20 * fbdiv * 1000 * 1000; ++ } ++ break; ++ } ++ cpu_clk = 880000000; ++ ralink_clk_add("cpu", cpu_clk); ++ ralink_clk_add("1e000b00.spi", 50000000); ++ ralink_clk_add("1e000c00.uartlite", 50000000); ++ ralink_clk_add("1e000d00.uart", 50000000); ++} ++ ++void __init ralink_of_remap(void) ++{ ++ rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc"); ++ rt_memc_membase = plat_of_remap_node("mtk,mt7621-memc"); ++ ++ if (!rt_sysc_membase || !rt_memc_membase) ++ panic("Failed to remap core resources"); ++} ++ ++void prom_soc_init(struct ralink_soc_info *soc_info) ++{ ++ void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE); ++ unsigned char *name = NULL; ++ u32 n0; ++ u32 n1; ++ u32 rev; ++ ++ n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); ++ n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); ++ ++ if (n0 == MT7621_CHIP_NAME0 && n1 == MT7621_CHIP_NAME1) { ++ name = "MT7621"; ++ soc_info->compatible = "mtk,mt7621-soc"; ++ } else { ++ panic("mt7621: unknown SoC, n0:%08x n1:%08x\n", n0, n1); ++ } ++ ++ rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); ++ ++ snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, ++ "Mediatek %s ver:%u eco:%u", ++ name, ++ (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK, ++ (rev & CHIP_REV_ECO_MASK)); ++ ++ soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN; ++ soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX; ++ soc_info->mem_base = MT7621_DRAM_BASE; ++ ++ rt2880_pinmux_data = mt7621_pinmux_data; ++ ++ if (register_cmp_smp_ops()) ++ panic("failed to register_vsmp_smp_ops()"); ++} +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0013-MIPS-ralink-add-MT7621-defconfig.patch b/target/linux/ramips/patches-3.14/0013-MIPS-ralink-add-MT7621-defconfig.patch new file mode 100644 index 0000000000..831f2a7730 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0013-MIPS-ralink-add-MT7621-defconfig.patch @@ -0,0 +1,217 @@ +From 8f92eac5ace0f834ec069b4bb8e9ad38f162de0e Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 27 Jan 2014 13:12:41 +0000 +Subject: [PATCH 13/57] MIPS: ralink: add MT7621 defconfig + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/configs/mt7621_defconfig | 197 ++++++++++++++++++++++++++++++++++++ + 1 file changed, 197 insertions(+) + create mode 100644 arch/mips/configs/mt7621_defconfig + +diff --git a/arch/mips/configs/mt7621_defconfig b/arch/mips/configs/mt7621_defconfig +new file mode 100644 +index 0000000..7719471 +--- /dev/null ++++ b/arch/mips/configs/mt7621_defconfig +@@ -0,0 +1,197 @@ ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SYSVIPC=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_RCU_FANOUT=32 ++CONFIG_UIDGID_STRICT_TYPE_CHECKS=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="/openwrt/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/root-ramips /openwrt/trunk/target/linux/generic/image/initramfs-base-files.txt" ++CONFIG_INITRAMFS_ROOT_UID=1000 ++CONFIG_INITRAMFS_ROOT_GID=1000 ++# CONFIG_RD_GZIP is not set ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++# CONFIG_AIO is not set ++CONFIG_EMBEDDED=y ++# CONFIG_VM_EVENT_COUNTERS is not set ++# CONFIG_SLUB_DEBUG is not set ++# CONFIG_COMPAT_BRK is not set ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_BLK_DEV_BSG is not set ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_IOSCHED_CFQ is not set ++CONFIG_SMP=y ++CONFIG_NR_CPUS=4 ++CONFIG_SCHED_SMT=y ++# CONFIG_COMPACTION is not set ++# CONFIG_CROSS_MEMORY_ATTACH is not set ++# CONFIG_SECCOMP is not set ++CONFIG_HZ_100=y ++CONFIG_CMDLINE_BOOL=y ++CONFIG_CMDLINE="rootfstype=squashfs,jffs2" ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_UNIX=y ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_IP_MULTIPLE_TABLES=y ++CONFIG_IP_ROUTE_MULTIPATH=y ++CONFIG_IP_ROUTE_VERBOSE=y ++CONFIG_IP_MROUTE=y ++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y ++CONFIG_ARPD=y ++CONFIG_SYN_COOKIES=y ++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_BEET is not set ++# CONFIG_INET_LRO is not set ++# CONFIG_INET_DIAG is not set ++CONFIG_TCP_CONG_ADVANCED=y ++# CONFIG_TCP_CONG_BIC is not set ++# CONFIG_TCP_CONG_WESTWOOD is not set ++# CONFIG_TCP_CONG_HTCP is not set ++CONFIG_IPV6_PRIVACY=y ++# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET6_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET6_XFRM_MODE_BEET is not set ++# CONFIG_IPV6_SIT is not set ++CONFIG_IPV6_MULTIPLE_TABLES=y ++CONFIG_IPV6_SUBTREES=y ++CONFIG_IPV6_MROUTE=y ++CONFIG_NETFILTER=y ++# CONFIG_BRIDGE_NETFILTER is not set ++CONFIG_NF_CONNTRACK=m ++CONFIG_NF_CONNTRACK_FTP=m ++CONFIG_NF_CONNTRACK_IRC=m ++CONFIG_NETFILTER_XT_MARK=m ++CONFIG_NETFILTER_XT_TARGET_LOG=m ++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m ++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m ++CONFIG_NETFILTER_XT_MATCH_COMMENT=m ++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m ++CONFIG_NETFILTER_XT_MATCH_LIMIT=m ++CONFIG_NETFILTER_XT_MATCH_MAC=m ++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++CONFIG_NETFILTER_XT_MATCH_TIME=m ++CONFIG_NF_CONNTRACK_IPV4=m ++# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set ++CONFIG_IP_NF_IPTABLES=m ++CONFIG_IP_NF_FILTER=m ++CONFIG_IP_NF_TARGET_REJECT=m ++CONFIG_NF_NAT_IPV4=m ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++CONFIG_IP_NF_TARGET_REDIRECT=m ++CONFIG_IP_NF_MANGLE=m ++CONFIG_IP_NF_RAW=m ++CONFIG_NF_CONNTRACK_IPV6=m ++CONFIG_IP6_NF_IPTABLES=m ++CONFIG_IP6_NF_MATCH_AH=m ++CONFIG_IP6_NF_MATCH_EUI64=m ++CONFIG_IP6_NF_MATCH_FRAG=m ++CONFIG_IP6_NF_MATCH_OPTS=m ++CONFIG_IP6_NF_MATCH_IPV6HEADER=m ++CONFIG_IP6_NF_MATCH_MH=m ++CONFIG_IP6_NF_MATCH_RT=m ++CONFIG_IP6_NF_FILTER=m ++CONFIG_IP6_NF_TARGET_REJECT=m ++CONFIG_IP6_NF_MANGLE=m ++CONFIG_IP6_NF_RAW=m ++CONFIG_BRIDGE=m ++# CONFIG_BRIDGE_IGMP_SNOOPING is not set ++CONFIG_VLAN_8021Q=y ++CONFIG_NET_SCHED=y ++CONFIG_NET_SCH_FQ_CODEL=y ++CONFIG_HAMRADIO=y ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++# CONFIG_FIRMWARE_IN_KERNEL is not set ++CONFIG_MTD=y ++CONFIG_MTD_CMDLINE_PARTS=y ++CONFIG_MTD_BLOCK=y ++CONFIG_MTD_CFI=y ++CONFIG_MTD_CFI_AMDSTD=y ++CONFIG_MTD_COMPLEX_MAPPINGS=y ++CONFIG_MTD_PHYSMAP=y ++CONFIG_MTD_M25P80=y ++CONFIG_EEPROM_93CX6=m ++CONFIG_SCSI=y ++CONFIG_BLK_DEV_SD=y ++CONFIG_NETDEVICES=y ++# CONFIG_NET_PACKET_ENGINE is not set ++# CONFIG_NET_VENDOR_WIZNET is not set ++CONFIG_PHYLIB=y ++CONFIG_SWCONFIG=y ++CONFIG_PPP=m ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPPOE=m ++CONFIG_PPP_ASYNC=m ++CONFIG_ISDN=y ++# CONFIG_INPUT is not set ++# CONFIG_SERIO is not set ++# CONFIG_VT is not set ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_DEVKMEM is not set ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set ++CONFIG_SERIAL_8250_CONSOLE=y ++# CONFIG_SERIAL_8250_PCI is not set ++CONFIG_SERIAL_8250_RUNTIME_UARTS=2 ++CONFIG_SPI=y ++CONFIG_GPIOLIB=y ++CONFIG_GPIO_SYSFS=y ++# CONFIG_HWMON is not set ++CONFIG_WATCHDOG=y ++CONFIG_WATCHDOG_CORE=y ++# CONFIG_VGA_ARB is not set ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_PLATFORM=y ++CONFIG_USB_MT7621_XHCI_PLATFORM=y ++CONFIG_USB_STORAGE=y ++CONFIG_USB_PHY=y ++CONFIG_NEW_LEDS=y ++CONFIG_LEDS_CLASS=y ++CONFIG_LEDS_GPIO=m ++CONFIG_LEDS_TRIGGERS=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y ++CONFIG_STAGING=y ++CONFIG_USB_DWC2=m ++# CONFIG_IOMMU_SUPPORT is not set ++CONFIG_RESET_CONTROLLER=y ++# CONFIG_FIRMWARE_MEMMAP is not set ++# CONFIG_DNOTIFY is not set ++# CONFIG_PROC_PAGE_MONITOR is not set ++CONFIG_TMPFS=y ++CONFIG_TMPFS_XATTR=y ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_SUMMARY=y ++CONFIG_JFFS2_FS_XATTR=y ++# CONFIG_JFFS2_FS_POSIX_ACL is not set ++# CONFIG_JFFS2_FS_SECURITY is not set ++CONFIG_JFFS2_COMPRESSION_OPTIONS=y ++# CONFIG_JFFS2_ZLIB is not set ++CONFIG_SQUASHFS=y ++# CONFIG_SQUASHFS_ZLIB is not set ++CONFIG_SQUASHFS_XZ=y ++CONFIG_PRINTK_TIME=y ++# CONFIG_ENABLE_MUST_CHECK is not set ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++CONFIG_STRIP_ASM_SYMS=y ++# CONFIG_UNUSED_SYMBOLS is not set ++CONFIG_DEBUG_FS=y ++# CONFIG_SCHED_DEBUG is not set ++CONFIG_DEBUG_INFO=y ++CONFIG_DEBUG_INFO_REDUCED=y ++CONFIG_RCU_CPU_STALL_TIMEOUT=60 ++# CONFIG_FTRACE is not set ++CONFIG_CRYPTO_ARC4=m ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++# CONFIG_VIRTUALIZATION is not set ++CONFIG_CRC_ITU_T=m ++CONFIG_CRC32_SARWATE=y ++# CONFIG_XZ_DEC_X86 is not set ++CONFIG_AVERAGE=y +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0014-MIPS-ralink-add-MT7621-dts-file.patch b/target/linux/ramips/patches-3.14/0014-MIPS-ralink-add-MT7621-dts-file.patch new file mode 100644 index 0000000000..460a33c893 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0014-MIPS-ralink-add-MT7621-dts-file.patch @@ -0,0 +1,311 @@ +From 34e2a5ededc6140f311b3b3c88edf4e18e88126a Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Fri, 24 Jan 2014 17:01:22 +0100 +Subject: [PATCH 14/57] MIPS: ralink: add MT7621 dts file + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/dts/Makefile | 1 + + arch/mips/ralink/dts/mt7621.dtsi | 257 ++++++++++++++++++++++++++++++++++ + arch/mips/ralink/dts/mt7621_eval.dts | 16 +++ + 3 files changed, 274 insertions(+) + create mode 100644 arch/mips/ralink/dts/mt7621.dtsi + create mode 100644 arch/mips/ralink/dts/mt7621_eval.dts + +diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile +index 18194fa..9742c73 100644 +--- a/arch/mips/ralink/dts/Makefile ++++ b/arch/mips/ralink/dts/Makefile +@@ -2,3 +2,4 @@ obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_eval.dtb.o + obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o + obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o + obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o ++obj-$(CONFIG_DTB_MT7621_EVAL) := mt7621_eval.dtb.o +diff --git a/arch/mips/ralink/dts/mt7621.dtsi b/arch/mips/ralink/dts/mt7621.dtsi +new file mode 100644 +index 0000000..6db2c57 +--- /dev/null ++++ b/arch/mips/ralink/dts/mt7621.dtsi +@@ -0,0 +1,257 @@ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "ralink,mtk7620a-soc"; ++ ++ cpus { ++ cpu@0 { ++ compatible = "mips,mips24KEc"; ++ }; ++ }; ++ ++ cpuintc: cpuintc@0 { ++ #address-cells = <0>; ++ #interrupt-cells = <1>; ++ interrupt-controller; ++ compatible = "mti,cpu-interrupt-controller"; ++ }; ++ ++ palmbus@1E000000 { ++ compatible = "palmbus"; ++ reg = <0x1E000000 0x100000>; ++ ranges = <0x0 0x1E000000 0x0FFFFF>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ sysc@0 { ++ compatible = "mtk,mt7621-sysc"; ++ reg = <0x0 0x100>; ++ }; ++ ++ wdt@100 { ++ compatible = "mtk,mt7621-wdt"; ++ reg = <0x100 0x100>; ++ }; ++ ++ gpio@600 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ compatible = "mtk,mt7621-gpio"; ++ reg = <0x600 0x100>; ++ ++ gpio0: bank@0 { ++ reg = <0>; ++ compatible = "mtk,mt7621-gpio-bank"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ gpio1: bank@1 { ++ reg = <1>; ++ compatible = "mtk,mt7621-gpio-bank"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ gpio2: bank@2 { ++ reg = <2>; ++ compatible = "mtk,mt7621-gpio-bank"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ }; ++ ++ memc@5000 { ++ compatible = "mtk,mt7621-memc"; ++ reg = <0x300 0x100>; ++ }; ++ ++ uartlite@c00 { ++ compatible = "ns16550a"; ++ reg = <0xc00 0x100>; ++ ++ interrupt-parent = <&gic>; ++ interrupts = <26>; ++ ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ no-loopback-test; ++ }; ++ ++ uart@d00 { ++ compatible = "ns16550a"; ++ reg = <0xd00 0x100>; ++ ++ interrupt-parent = <&gic>; ++ interrupts = <27>; ++ ++ fifo-size = <16>; ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ no-loopback-test; ++ }; ++ ++ spi@b00 { ++ status = "okay"; ++ ++ compatible = "ralink,mt7621-spi"; ++ reg = <0xb00 0x100>; ++ ++ resets = <&rstctrl 18>; ++ reset-names = "spi"; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++/* pinctrl-names = "default"; ++ pinctrl-0 = <&spi_pins>;*/ ++ ++ m25p80@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "en25q64"; ++ reg = <0 0>; ++ linux,modalias = "m25p80", "en25q64"; ++ spi-max-frequency = <10000000>; ++ ++ m25p,chunked-io; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x0 0x30000>; ++ read-only; ++ }; ++ ++ partition@30000 { ++ label = "u-boot-env"; ++ reg = <0x30000 0x10000>; ++ read-only; ++ }; ++ ++ factory: partition@40000 { ++ label = "factory"; ++ reg = <0x40000 0x10000>; ++ read-only; ++ }; ++ ++ partition@50000 { ++ label = "firmware"; ++ reg = <0x50000 0x7a0000>; ++ }; ++ ++ partition@7f0000 { ++ label = "test"; ++ reg = <0x7f0000 0x10000>; ++ }; ++ }; ++ }; ++ }; ++ ++ rstctrl: rstctrl { ++ compatible = "ralink,rt2880-reset"; ++ #reset-cells = <1>; ++ }; ++ ++ sdhci@1E130000 { ++ compatible = "ralink,mt7620a-sdhci"; ++ reg = <0x1E130000 4000>; ++ ++ interrupt-parent = <&gic>; ++ interrupts = <20>; ++ }; ++ ++ xhci@1E1C0000 { ++ compatible = "xhci-platform"; ++ reg = <0x1E1C0000 4000>; ++ ++ interrupt-parent = <&gic>; ++ interrupts = <22>; ++ }; ++ ++ gic: gic@1fbc0000 { ++ #address-cells = <0>; ++ #interrupt-cells = <1>; ++ interrupt-controller; ++ compatible = "ralink,mt7621-gic"; ++ reg = < 0x1fbc0000 0x80 /* gic */ ++ 0x1fbf0000 0x8000 /* cpc */ ++ 0x1fbf8000 0x8000 /* gpmc */ ++ >; ++ }; ++ ++ nand@1e003000 { ++ compatible = "mtk,mt7621-nand"; ++ bank-width = <2>; ++ reg = <0x1e003000 0x800 ++ 0x1e003800 0x800>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "uboot"; ++ reg = <0x00000 0x80000>; /* 64 KB */ ++ }; ++ partition@80000 { ++ label = "uboot_env"; ++ reg = <0x80000 0x80000>; /* 64 KB */ ++ }; ++ partition@100000 { ++ label = "factory"; ++ reg = <0x100000 0x40000>; ++ }; ++ partition@140000 { ++ label = "rootfs"; ++ reg = <0x140000 0xec0000>; ++ }; ++ }; ++ ++ ethernet@1e100000 { ++ compatible = "ralink,mt7621-eth"; ++ reg = <0x1e100000 10000>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ralink,port-map = "llllw"; ++ ++ interrupt-parent = <&gic>; ++ interrupts = <3>; ++ ++/* resets = <&rstctrl 21 &rstctrl 23>; ++ reset-names = "fe", "esw"; ++ ++ port@4 { ++ compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port"; ++ reg = <4>; ++ ++ status = "disabled"; ++ }; ++ ++ port@5 { ++ compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port"; ++ reg = <5>; ++ ++ status = "disabled"; ++ }; ++*/ ++ mdio-bus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ phy1f: ethernet-phy@1f { ++ reg = <0x1f>; ++ phy-mode = "rgmii"; ++ ++/* interrupt-parent = <&gic>; ++ interrupts = <23>; ++*/ }; ++ }; ++ }; ++ ++ gsw@1e110000 { ++ compatible = "ralink,mt7620a-gsw"; ++ reg = <0x1e110000 8000>; ++ }; ++}; +diff --git a/arch/mips/ralink/dts/mt7621_eval.dts b/arch/mips/ralink/dts/mt7621_eval.dts +new file mode 100644 +index 0000000..834f59c +--- /dev/null ++++ b/arch/mips/ralink/dts/mt7621_eval.dts +@@ -0,0 +1,16 @@ ++/dts-v1/; ++ ++/include/ "mt7621.dtsi" ++ ++/ { ++ compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc"; ++ model = "Ralink MT7621 evaluation board"; ++ ++ memory@0 { ++ reg = <0x0 0x2000000>; ++ }; ++ ++ chosen { ++ bootargs = "console=ttyS0,57600"; ++ }; ++}; +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0015-MIPS-ralink-cleanup-early_printk.patch b/target/linux/ramips/patches-3.14/0015-MIPS-ralink-cleanup-early_printk.patch new file mode 100644 index 0000000000..a874c4aeb6 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0015-MIPS-ralink-cleanup-early_printk.patch @@ -0,0 +1,84 @@ +From e410b0069ee7c318a5b556f39b8b16814330a208 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Fri, 24 Jan 2014 17:01:17 +0100 +Subject: [PATCH 15/57] MIPS: ralink: cleanup early_printk + +Add support for the new MT7621/8 SoC and kill ifdefs. +Cleanup some whitespace error while we are at it. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/early_printk.c | 45 ++++++++++++++++++++++++++------------- + 1 file changed, 30 insertions(+), 15 deletions(-) + +diff --git a/arch/mips/ralink/early_printk.c b/arch/mips/ralink/early_printk.c +index b46d041..255d695 100644 +--- a/arch/mips/ralink/early_printk.c ++++ b/arch/mips/ralink/early_printk.c +@@ -12,21 +12,24 @@ + #include <asm/addrspace.h> + + #ifdef CONFIG_SOC_RT288X +-#define EARLY_UART_BASE 0x300c00 ++#define EARLY_UART_BASE 0x300c00 ++#define CHIPID_BASE 0x300004 ++#elif defined(CONFIG_SOC_MT7621) ++#define EARLY_UART_BASE 0x1E000c00 ++#define CHIPID_BASE 0x1E000004 + #else +-#define EARLY_UART_BASE 0x10000c00 ++#define EARLY_UART_BASE 0x10000c00 ++#define CHIPID_BASE 0x10000004 + #endif + +-#define UART_REG_RX 0x00 +-#define UART_REG_TX 0x04 +-#define UART_REG_IER 0x08 +-#define UART_REG_IIR 0x0c +-#define UART_REG_FCR 0x10 +-#define UART_REG_LCR 0x14 +-#define UART_REG_MCR 0x18 +-#define UART_REG_LSR 0x1c ++#define MT7628_CHIP_NAME1 0x20203832 ++ ++#define UART_REG_TX 0x04 ++#define UART_REG_LSR 0x14 ++#define UART_REG_LSR_RT2880 0x1c + + static __iomem void *uart_membase = (__iomem void *) KSEG1ADDR(EARLY_UART_BASE); ++static __iomem void *chipid_membase = (__iomem void *) KSEG1ADDR(CHIPID_BASE); + + static inline void uart_w32(u32 val, unsigned reg) + { +@@ -38,11 +41,23 @@ static inline u32 uart_r32(unsigned reg) + return __raw_readl(uart_membase + reg); + } + ++static inline int soc_is_mt7628(void) ++{ ++ return IS_ENABLED(CONFIG_SOC_MT7620) && ++ (__raw_readl(chipid_membase) == MT7628_CHIP_NAME1); ++} ++ + void prom_putchar(unsigned char ch) + { +- while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0) +- ; +- uart_w32(ch, UART_REG_TX); +- while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0) +- ; ++ if (IS_ENABLED(CONFIG_SOC_MT7621) || soc_is_mt7628()) { ++ uart_w32(ch, UART_TX); ++ while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0) ++ ; ++ } else { ++ while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0) ++ ; ++ uart_w32(ch, UART_REG_TX); ++ while ((uart_r32(UART_REG_LSR_RT2880) & UART_LSR_THRE) == 0) ++ ; ++ } + } +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0016-MIPS-ralink-add-MT7621-pcie-driver.patch b/target/linux/ramips/patches-3.14/0016-MIPS-ralink-add-MT7621-pcie-driver.patch new file mode 100644 index 0000000000..7b73575215 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0016-MIPS-ralink-add-MT7621-pcie-driver.patch @@ -0,0 +1,830 @@ +From 95d7eb13a864ef666cea7f0e86349e86d80d28ce Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 05:22:39 +0000 +Subject: [PATCH 16/57] MIPS: ralink: add MT7621 pcie driver + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/pci/Makefile | 1 + + arch/mips/pci/pci-mt7621.c | 797 ++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 798 insertions(+) + create mode 100644 arch/mips/pci/pci-mt7621.c + +diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile +index 137f2a6..d054bc8 100644 +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1480.o pci-bcm1480ht.o + obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o + obj-$(CONFIG_LANTIQ) += fixup-lantiq.o + obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o ++obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o + obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o + obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o + obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o +diff --git a/arch/mips/pci/pci-mt7621.c b/arch/mips/pci/pci-mt7621.c +new file mode 100644 +index 0000000..0b58fce +--- /dev/null ++++ b/arch/mips/pci/pci-mt7621.c +@@ -0,0 +1,797 @@ ++/************************************************************************** ++ * ++ * BRIEF MODULE DESCRIPTION ++ * PCI init for Ralink RT2880 solution ++ * ++ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw) ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * ++ ************************************************************************** ++ * May 2007 Bruce Chang ++ * Initial Release ++ * ++ * May 2009 Bruce Chang ++ * support RT2880/RT3883 PCIe ++ * ++ * May 2011 Bruce Chang ++ * support RT6855/MT7620 PCIe ++ * ++ ************************************************************************** ++ */ ++ ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#include <linux/version.h> ++#include <asm/pci.h> ++#include <asm/io.h> ++//#include <asm/mach-ralink/eureka_ep430.h> ++#include <linux/init.h> ++#include <linux/mod_devicetable.h> ++#include <linux/delay.h> ++//#include <asm/rt2880/surfboardint.h> ++ ++#include <ralink_regs.h> ++ ++extern void pcie_phy_init(void); ++extern void chk_phy_pll(void); ++ ++/* ++ * These functions and structures provide the BIOS scan and mapping of the PCI ++ * devices. ++ */ ++ ++#define CONFIG_PCIE_PORT0 ++#define CONFIG_PCIE_PORT1 ++#define CONFIG_PCIE_PORT2 ++#define RALINK_PCIE0_CLK_EN (1<<24) ++#define RALINK_PCIE1_CLK_EN (1<<25) ++#define RALINK_PCIE2_CLK_EN (1<<26) ++ ++#define RALINK_PCI_CONFIG_ADDR 0x20 ++#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24 ++#define SURFBOARDINT_PCIE0 12 /* PCIE0 */ ++#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0 ++#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1 ++#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2 ++#define SURFBOARDINT_PCIE1 32 /* PCIE1 */ ++#define SURFBOARDINT_PCIE2 33 /* PCIE2 */ ++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028) ++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C) ++#define RALINK_PCIE0_RST (1<<24) ++#define RALINK_PCIE1_RST (1<<25) ++#define RALINK_PCIE2_RST (1<<26) ++#define RALINK_SYSCTL_BASE 0xBE000000 ++ ++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000) ++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C) ++#define RALINK_PCI_BASE 0xBE140000 ++ ++#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000) ++#define RT6855_PCIE0_OFFSET 0x2000 ++#define RT6855_PCIE1_OFFSET 0x3000 ++#define RT6855_PCIE2_OFFSET 0x4000 ++ ++#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010) ++#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018) ++#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030) ++#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034) ++#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038) ++#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050) ++#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060) ++#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064) ++ ++#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010) ++#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018) ++#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030) ++#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034) ++#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038) ++#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050) ++#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060) ++#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064) ++ ++#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010) ++#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018) ++#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030) ++#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034) ++#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038) ++#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050) ++#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060) ++#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064) ++ ++#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000) ++#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000) ++ ++ ++#define MV_WRITE(ofs, data) \ ++ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data) ++#define MV_READ(ofs, data) \ ++ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs))) ++#define MV_READ_DATA(ofs) \ ++ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs))) ++ ++#define MV_WRITE_16(ofs, data) \ ++ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data) ++#define MV_READ_16(ofs, data) \ ++ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs))) ++ ++#define MV_WRITE_8(ofs, data) \ ++ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data ++#define MV_READ_8(ofs, data) \ ++ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) ++ ++ ++ ++#define RALINK_PCI_MM_MAP_BASE 0x60000000 ++#define RALINK_PCI_IO_MAP_BASE 0x1e160000 ++ ++#define RALINK_SYSTEM_CONTROL_BASE 0xbe000000 ++#define GPIO_PERST ++#define ASSERT_SYSRST_PCIE(val) do { \ ++ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \ ++ RALINK_RSTCTRL |= val; \ ++ else \ ++ RALINK_RSTCTRL &= ~val; \ ++ } while(0) ++#define DEASSERT_SYSRST_PCIE(val) do { \ ++ if (*(unsigned int *)(0xbe00000c) == 0x00030101) \ ++ RALINK_RSTCTRL &= ~val; \ ++ else \ ++ RALINK_RSTCTRL |= val; \ ++ } while(0) ++#define RALINK_SYSCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x14) ++#define RALINK_CLKCFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x30) ++#define RALINK_RSTCTRL *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x34) ++#define RALINK_GPIOMODE *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x60) ++#define RALINK_PCIE_CLK_GEN *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x7c) ++#define RALINK_PCIE_CLK_GEN1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x80) ++#define PPLL_CFG1 *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0x9c) ++#define PPLL_DRV *(unsigned int *)(RALINK_SYSTEM_CONTROL_BASE + 0xa0) ++//RALINK_SYSCFG1 bit ++#define RALINK_PCI_HOST_MODE_EN (1<<7) ++#define RALINK_PCIE_RC_MODE_EN (1<<8) ++//RALINK_RSTCTRL bit ++#define RALINK_PCIE_RST (1<<23) ++#define RALINK_PCI_RST (1<<24) ++//RALINK_CLKCFG1 bit ++#define RALINK_PCI_CLK_EN (1<<19) ++#define RALINK_PCIE_CLK_EN (1<<21) ++//RALINK_GPIOMODE bit ++#define PCI_SLOTx2 (1<<11) ++#define PCI_SLOTx1 (2<<11) ++//MTK PCIE PLL bit ++#define PDRV_SW_SET (1<<31) ++#define LC_CKDRVPD_ (1<<19) ++ ++#define MEMORY_BASE 0x0 ++int pcie_link_status = 0; ++ ++void __inline__ read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val); ++void __inline__ write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val); ++ ++#define PCI_ACCESS_READ_1 0 ++#define PCI_ACCESS_READ_2 1 ++#define PCI_ACCESS_READ_4 2 ++#define PCI_ACCESS_WRITE_1 3 ++#define PCI_ACCESS_WRITE_2 4 ++#define PCI_ACCESS_WRITE_4 5 ++ ++static int config_access(unsigned char access_type, struct pci_bus *bus, ++ unsigned int devfn, unsigned int where, u32 * data) ++{ ++ unsigned int slot = PCI_SLOT(devfn); ++ u8 func = PCI_FUNC(devfn); ++ uint32_t address_reg, data_reg; ++ unsigned int address; ++ ++ address_reg = RALINK_PCI_CONFIG_ADDR; ++ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG; ++ ++ address = (((where&0xF00)>>8)<<24) |(bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000; ++ MV_WRITE(address_reg, address); ++ ++ switch(access_type) { ++ case PCI_ACCESS_WRITE_1: ++ MV_WRITE_8(data_reg+(where&0x3), *data); ++ break; ++ case PCI_ACCESS_WRITE_2: ++ MV_WRITE_16(data_reg+(where&0x3), *data); ++ break; ++ case PCI_ACCESS_WRITE_4: ++ MV_WRITE(data_reg, *data); ++ break; ++ case PCI_ACCESS_READ_1: ++ MV_READ_8( data_reg+(where&0x3), data); ++ break; ++ case PCI_ACCESS_READ_2: ++ MV_READ_16(data_reg+(where&0x3), data); ++ break; ++ case PCI_ACCESS_READ_4: ++ MV_READ(data_reg, data); ++ break; ++ default: ++ printk("no specify access type\n"); ++ break; ++ } ++ return 0; ++} ++ ++static int ++read_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 * val) ++{ ++ return config_access(PCI_ACCESS_READ_1, bus, devfn, (unsigned int)where, (u32 *)val); ++} ++ ++static int ++read_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 * val) ++{ ++ return config_access(PCI_ACCESS_READ_2, bus, devfn, (unsigned int)where, (u32 *)val); ++} ++ ++static int ++read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 * val) ++{ ++ return config_access(PCI_ACCESS_READ_4, bus, devfn, (unsigned int)where, (u32 *)val); ++} ++ ++static int ++write_config_byte(struct pci_bus *bus, unsigned int devfn, int where, u8 val) ++{ ++ if (config_access(PCI_ACCESS_WRITE_1, bus, devfn, (unsigned int)where, (u32 *)&val)) ++ return -1; ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int ++write_config_word(struct pci_bus *bus, unsigned int devfn, int where, u16 val) ++{ ++ if (config_access(PCI_ACCESS_WRITE_2, bus, devfn, where, (u32 *)&val)) ++ return -1; ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int ++write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, u32 val) ++{ ++ if (config_access(PCI_ACCESS_WRITE_4, bus, devfn, where, &val)) ++ return -1; ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++ ++static int ++pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) ++{ ++ switch (size) { ++ case 1: ++ return read_config_byte(bus, devfn, where, (u8 *) val); ++ case 2: ++ return read_config_word(bus, devfn, where, (u16 *) val); ++ default: ++ return read_config_dword(bus, devfn, where, val); ++ } ++} ++ ++static int ++pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) ++{ ++ switch (size) { ++ case 1: ++ return write_config_byte(bus, devfn, where, (u8) val); ++ case 2: ++ return write_config_word(bus, devfn, where, (u16) val); ++ default: ++ return write_config_dword(bus, devfn, where, val); ++ } ++} ++ ++struct pci_ops rt2880_pci_ops= { ++ .read = pci_config_read, ++ .write = pci_config_write, ++}; ++ ++static struct resource rt2880_res_pci_mem1 = { ++ .name = "PCI MEM1", ++ .start = RALINK_PCI_MM_MAP_BASE, ++ .end = (u32)((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)), ++ .flags = IORESOURCE_MEM, ++}; ++static struct resource rt2880_res_pci_io1 = { ++ .name = "PCI I/O1", ++ .start = RALINK_PCI_IO_MAP_BASE, ++ .end = (u32)((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)), ++ .flags = IORESOURCE_IO, ++}; ++ ++struct pci_controller rt2880_controller = { ++ .pci_ops = &rt2880_pci_ops, ++ .mem_resource = &rt2880_res_pci_mem1, ++ .io_resource = &rt2880_res_pci_io1, ++ .mem_offset = 0x00000000UL, ++ .io_offset = 0x00000000UL, ++ .io_map_base = 0xa0000000, ++}; ++ ++void __inline__ ++read_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long *val) ++{ ++ unsigned int address_reg, data_reg, address; ++ ++ address_reg = RALINK_PCI_CONFIG_ADDR; ++ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG; ++ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ; ++ MV_WRITE(address_reg, address); ++ MV_READ(data_reg, val); ++ return; ++} ++ ++void __inline__ ++write_config(unsigned long bus, unsigned long dev, unsigned long func, unsigned long reg, unsigned long val) ++{ ++ unsigned int address_reg, data_reg, address; ++ ++ address_reg = RALINK_PCI_CONFIG_ADDR; ++ data_reg = RALINK_PCI_CONFIG_DATA_VIRTUAL_REG; ++ address = (((reg & 0xF00)>>8)<<24) | (bus << 16) | (dev << 11) | (func << 8) | (reg & 0xfc) | 0x80000000 ; ++ MV_WRITE(address_reg, address); ++ MV_WRITE(data_reg, val); ++ return; ++} ++ ++ ++int __init ++pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ u16 cmd; ++ u32 val; ++ int irq = 0; ++ ++ if ((dev->bus->number == 0) && (slot == 0)) { ++ write_config(0, 0, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); ++ read_config(0, 0, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); ++ printk("BAR0 at slot 0 = %x\n", val); ++ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); ++ } else if((dev->bus->number == 0) && (slot == 0x1)) { ++ write_config(0, 1, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); ++ read_config(0, 1, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); ++ printk("BAR0 at slot 1 = %x\n", val); ++ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); ++ } else if((dev->bus->number == 0) && (slot == 0x2)) { ++ write_config(0, 2, 0, PCI_BASE_ADDRESS_0, MEMORY_BASE); ++ read_config(0, 2, 0, PCI_BASE_ADDRESS_0, (unsigned long *)&val); ++ printk("BAR0 at slot 2 = %x\n", val); ++ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); ++ } else if ((dev->bus->number == 1) && (slot == 0x0)) { ++ switch (pcie_link_status) { ++ case 2: ++ case 6: ++ irq = RALINK_INT_PCIE1; ++ break; ++ case 4: ++ irq = RALINK_INT_PCIE2; ++ break; ++ default: ++ irq = RALINK_INT_PCIE0; ++ } ++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); ++ } else if ((dev->bus->number == 2) && (slot == 0x0)) { ++ switch (pcie_link_status) { ++ case 5: ++ case 6: ++ irq = RALINK_INT_PCIE2; ++ break; ++ default: ++ irq = RALINK_INT_PCIE1; ++ } ++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); ++ } else if ((dev->bus->number == 2) && (slot == 0x1)) { ++ switch (pcie_link_status) { ++ case 5: ++ case 6: ++ irq = RALINK_INT_PCIE2; ++ break; ++ default: ++ irq = RALINK_INT_PCIE1; ++ } ++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); ++ } else if ((dev->bus->number ==3) && (slot == 0x0)) { ++ irq = RALINK_INT_PCIE2; ++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); ++ } else if ((dev->bus->number ==3) && (slot == 0x1)) { ++ irq = RALINK_INT_PCIE2; ++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); ++ } else if ((dev->bus->number ==3) && (slot == 0x2)) { ++ irq = RALINK_INT_PCIE2; ++ printk("bus=0x%x, slot = 0x%x, irq=0x%x\n",dev->bus->number, slot, dev->irq); ++ } else { ++ printk("bus=0x%x, slot = 0x%x\n",dev->bus->number, slot); ++ return 0; ++ } ++ ++ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14 ++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10 ++ pci_read_config_word(dev, PCI_COMMAND, &cmd); ++ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; ++ pci_write_config_word(dev, PCI_COMMAND, cmd); ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); ++ return irq; ++} ++ ++void ++set_pcie_phy(u32 *addr, int start_b, int bits, int val) ++{ ++// printk("0x%p:", addr); ++// printk(" %x", *addr); ++ *(unsigned int *)(addr) &= ~(((1<<bits) - 1)<<start_b); ++ *(unsigned int *)(addr) |= val << start_b; ++// printk(" -> %x\n", *addr); ++} ++ ++void ++bypass_pipe_rst(void) ++{ ++#if defined (CONFIG_PCIE_PORT0) ++ /* PCIe Port 0 */ ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4] ++#endif ++#if defined (CONFIG_PCIE_PORT1) ++ /* PCIe Port 1 */ ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 12, 1, 0x01); // rg_pe1_pipe_rst_b ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x12c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4] ++#endif ++#if defined (CONFIG_PCIE_PORT2) ++ /* PCIe Port 2 */ ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 12, 1, 0x01); // rg_pe1_pipe_rst_b ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x02c), 4, 1, 0x01); // rg_pe1_pipe_cmd_frc[4] ++#endif ++} ++ ++void ++set_phy_for_ssc(void) ++{ ++ unsigned long reg = (*(volatile u32 *)(RALINK_SYSCTL_BASE + 0x10)); ++ ++ reg = (reg >> 6) & 0x7; ++#if defined (CONFIG_PCIE_PORT0) || defined (CONFIG_PCIE_PORT1) ++ /* Set PCIe Port0 & Port1 PHY to disable SSC */ ++ /* Debug Xtal Type */ ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 1 enable control ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x00); // rg_pe1_phy_en //Port 1 disable ++ if(reg <= 5 && reg >= 3) { // 40MHz Xtal ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode) ++ printk("***** Xtal 40MHz *****\n"); ++ } else { // 25MHz | 20MHz Xtal ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode) ++ if (reg >= 6) { ++ printk("***** Xtal 25MHz *****\n"); ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode) ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial ++ } else { ++ printk("***** Xtal 20MHz *****\n"); ++ } ++ } ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN ++ if(reg <= 5 && reg >= 3) { // 40MHz Xtal ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv ++ } ++ /* Enable PHY and disable force mode */ ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 5, 1, 0x01); // rg_pe1_phy_en //Port 1 enable ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P0P1_CTL_OFFSET + 0x100), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 1 disable control ++#endif ++#if defined (CONFIG_PCIE_PORT2) ++ /* Set PCIe Port2 PHY to disable SSC */ ++ /* Debug Xtal Type */ ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 8, 1, 0x01); // rg_pe1_frc_h_xtal_type ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x400), 9, 2, 0x00); // rg_pe1_h_xtal_type ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x01); // rg_pe1_frc_phy_en //Force Port 0 enable control ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x00); // rg_pe1_phy_en //Port 0 disable ++ if(reg <= 5 && reg >= 3) { // 40MHz Xtal ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x01); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode) ++ } else { // 25MHz | 20MHz Xtal ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 6, 2, 0x00); // RG_PE1_H_PLL_PREDIV //Pre-divider ratio (for host mode) ++ if (reg >= 6) { // 25MHz Xtal ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4bc), 4, 2, 0x01); // RG_PE1_H_PLL_FBKSEL //Feedback clock select ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x49c), 0,31, 0x18000000); // RG_PE1_H_LCDDS_PCW_NCPO //DDS NCPO PCW (for host mode) ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a4), 0,16, 0x18d); // RG_PE1_H_LCDDS_SSC_PRD //DDS SSC dither period control ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 0,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA //DDS SSC dither amplitude control ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a8), 16,12, 0x4a); // RG_PE1_H_LCDDS_SSC_DELTA1 //DDS SSC dither amplitude control for initial ++ } ++ } ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4a0), 5, 1, 0x01); // RG_PE1_LCDDS_CLK_PH_INV //DDS clock inversion ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 22, 2, 0x02); // RG_PE1_H_PLL_BC ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 18, 4, 0x06); // RG_PE1_H_PLL_BP ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 12, 4, 0x02); // RG_PE1_H_PLL_IR ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 8, 4, 0x01); // RG_PE1_H_PLL_IC ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x4ac), 16, 3, 0x00); // RG_PE1_H_PLL_BR ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x490), 1, 3, 0x02); // RG_PE1_PLL_DIVEN ++ if(reg <= 5 && reg >= 3) { // 40MHz Xtal ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 6, 2, 0x01); // rg_pe1_mstckdiv //value of da_pe1_mstckdiv when force mode enable ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x414), 5, 1, 0x01); // rg_pe1_frc_mstckdiv //force mode enable of da_pe1_mstckdiv ++ } ++ /* Enable PHY and disable force mode */ ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 5, 1, 0x01); // rg_pe1_phy_en //Port 0 enable ++ set_pcie_phy((u32 *)(RALINK_PCIEPHY_P2_CTL_OFFSET + 0x000), 4, 1, 0x00); // rg_pe1_frc_phy_en //Force Port 0 disable control ++#endif ++} ++ ++int init_rt2880pci(void) ++{ ++ unsigned long val = 0; ++ iomem_resource.start = 0; ++ iomem_resource.end= ~0; ++ ioport_resource.start= 0; ++ ioport_resource.end = ~0; ++ ++#if defined (CONFIG_PCIE_PORT0) ++ val = RALINK_PCIE0_RST; ++#endif ++#if defined (CONFIG_PCIE_PORT1) ++ val |= RALINK_PCIE1_RST; ++#endif ++#if defined (CONFIG_PCIE_PORT2) ++ val |= RALINK_PCIE2_RST; ++#endif ++ DEASSERT_SYSRST_PCIE(val); ++ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL); ++ ++ bypass_pipe_rst(); ++ set_phy_for_ssc(); ++ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST | RALINK_PCIE1_RST | RALINK_PCIE2_RST); ++ printk("pull PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL); ++#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/ ++ *(unsigned int *)(0xbe000060) &= ~(0x3<<10 | 0x3<<3); ++ *(unsigned int *)(0xbe000060) |= 0x1<<10 | 0x1<<3; ++ mdelay(100); ++ *(unsigned int *)(0xbe000600) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // use GPIO19/GPIO8/GPIO7 (PERST_N/UART_RXD3/UART_TXD3) ++ mdelay(100); ++ *(unsigned int *)(0xbe000620) &= ~(0x1<<19 | 0x1<<8 | 0x1<<7); // clear DATA ++ ++ mdelay(100); ++#else ++ *(unsigned int *)(0xbe000060) &= ~0x00000c00; ++#endif ++#if defined (CONFIG_PCIE_PORT0) ++ val = RALINK_PCIE0_RST; ++#endif ++#if defined (CONFIG_PCIE_PORT1) ++ val |= RALINK_PCIE1_RST; ++#endif ++#if defined (CONFIG_PCIE_PORT2) ++ val |= RALINK_PCIE2_RST; ++#endif ++ DEASSERT_SYSRST_PCIE(val); ++ printk("release PCIe RST: RALINK_RSTCTRL = %x\n", RALINK_RSTCTRL); ++#if defined (CONFIG_PCIE_PORT0) ++ read_config(0, 0, 0, 0x70c, &val); ++ val &= ~(0xff)<<8; ++ val |= 0x50<<8; ++ write_config(0, 0, 0, 0x70c, val); ++#endif ++#if defined (CONFIG_PCIE_PORT1) ++ read_config(0, 1, 0, 0x70c, &val); ++ val &= ~(0xff)<<8; ++ val |= 0x50<<8; ++ write_config(0, 1, 0, 0x70c, val); ++#endif ++#if defined (CONFIG_PCIE_PORT2) ++ read_config(0, 2, 0, 0x70c, &val); ++ val &= ~(0xff)<<8; ++ val |= 0x50<<8; ++ write_config(0, 2, 0, 0x70c, val); ++#endif ++ ++#if defined (CONFIG_PCIE_PORT0) ++ read_config(0, 0, 0, 0x70c, &val); ++ printk("Port 0 N_FTS = %x\n", (unsigned int)val); ++#endif ++#if defined (CONFIG_PCIE_PORT1) ++ read_config(0, 1, 0, 0x70c, &val); ++ printk("Port 1 N_FTS = %x\n", (unsigned int)val); ++#endif ++#if defined (CONFIG_PCIE_PORT2) ++ read_config(0, 2, 0, 0x70c, &val); ++ printk("Port 2 N_FTS = %x\n", (unsigned int)val); ++#endif ++ ++ RALINK_RSTCTRL = (RALINK_RSTCTRL | RALINK_PCIE_RST); ++ RALINK_SYSCFG1 &= ~(0x30); ++ RALINK_SYSCFG1 |= (2<<4); ++ RALINK_PCIE_CLK_GEN &= 0x7fffffff; ++ RALINK_PCIE_CLK_GEN1 &= 0x80ffffff; ++ RALINK_PCIE_CLK_GEN1 |= 0xa << 24; ++ RALINK_PCIE_CLK_GEN |= 0x80000000; ++ mdelay(50); ++ RALINK_RSTCTRL = (RALINK_RSTCTRL & ~RALINK_PCIE_RST); ++ ++ ++#if defined GPIO_PERST /* add GPIO control instead of PERST_N */ /*chhung*/ ++ *(unsigned int *)(0xbe000620) |= 0x1<<19 | 0x1<<8 | 0x1<<7; // set DATA ++ mdelay(100); ++#else ++ RALINK_PCI_PCICFG_ADDR &= ~(1<<1); //de-assert PERST ++#endif ++ mdelay(500); ++ ++ ++ mdelay(500); ++#if defined (CONFIG_PCIE_PORT0) ++ if(( RALINK_PCI0_STATUS & 0x1) == 0) ++ { ++ printk("PCIE0 no card, disable it(RST&CLK)\n"); ++ ASSERT_SYSRST_PCIE(RALINK_PCIE0_RST); ++ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE0_CLK_EN); ++ pcie_link_status &= ~(1<<0); ++ } else { ++ pcie_link_status |= 1<<0; ++ RALINK_PCI_PCIMSK_ADDR |= (1<<20); // enable pcie1 interrupt ++ } ++#endif ++#if defined (CONFIG_PCIE_PORT1) ++ if(( RALINK_PCI1_STATUS & 0x1) == 0) ++ { ++ printk("PCIE1 no card, disable it(RST&CLK)\n"); ++ ASSERT_SYSRST_PCIE(RALINK_PCIE1_RST); ++ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE1_CLK_EN); ++ pcie_link_status &= ~(1<<1); ++ } else { ++ pcie_link_status |= 1<<1; ++ RALINK_PCI_PCIMSK_ADDR |= (1<<21); // enable pcie1 interrupt ++ } ++#endif ++#if defined (CONFIG_PCIE_PORT2) ++ if (( RALINK_PCI2_STATUS & 0x1) == 0) { ++ printk("PCIE2 no card, disable it(RST&CLK)\n"); ++ ASSERT_SYSRST_PCIE(RALINK_PCIE2_RST); ++ RALINK_CLKCFG1 = (RALINK_CLKCFG1 & ~RALINK_PCIE2_CLK_EN); ++ pcie_link_status &= ~(1<<2); ++ } else { ++ pcie_link_status |= 1<<2; ++ RALINK_PCI_PCIMSK_ADDR |= (1<<22); // enable pcie2 interrupt ++ } ++#endif ++ if (pcie_link_status == 0) ++ return 0; ++ ++/* ++pcie(2/1/0) link status pcie2_num pcie1_num pcie0_num ++3'b000 x x x ++3'b001 x x 0 ++3'b010 x 0 x ++3'b011 x 1 0 ++3'b100 0 x x ++3'b101 1 x 0 ++3'b110 1 0 x ++3'b111 2 1 0 ++*/ ++ switch(pcie_link_status) { ++ case 2: ++ RALINK_PCI_PCICFG_ADDR &= ~0x00ff0000; ++ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0 ++ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1 ++ break; ++ case 4: ++ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000; ++ RALINK_PCI_PCICFG_ADDR |= 0x1 << 16; //port0 ++ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1 ++ RALINK_PCI_PCICFG_ADDR |= 0x0 << 24; //port2 ++ break; ++ case 5: ++ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000; ++ RALINK_PCI_PCICFG_ADDR |= 0x0 << 16; //port0 ++ RALINK_PCI_PCICFG_ADDR |= 0x2 << 20; //port1 ++ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2 ++ break; ++ case 6: ++ RALINK_PCI_PCICFG_ADDR &= ~0x0fff0000; ++ RALINK_PCI_PCICFG_ADDR |= 0x2 << 16; //port0 ++ RALINK_PCI_PCICFG_ADDR |= 0x0 << 20; //port1 ++ RALINK_PCI_PCICFG_ADDR |= 0x1 << 24; //port2 ++ break; ++ } ++ printk(" -> %x\n", RALINK_PCI_PCICFG_ADDR); ++ //printk(" RALINK_PCI_ARBCTL = %x\n", RALINK_PCI_ARBCTL); ++ ++/* ++ ioport_resource.start = rt2880_res_pci_io1.start; ++ ioport_resource.end = rt2880_res_pci_io1.end; ++*/ ++ ++ RALINK_PCI_MEMBASE = 0xffffffff; //RALINK_PCI_MM_MAP_BASE; ++ RALINK_PCI_IOBASE = RALINK_PCI_IO_MAP_BASE; ++ ++#if defined (CONFIG_PCIE_PORT0) ++ //PCIe0 ++ if((pcie_link_status & 0x1) != 0) { ++ RALINK_PCI0_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE ++ RALINK_PCI0_IMBASEBAR0_ADDR = MEMORY_BASE; ++ RALINK_PCI0_CLASS = 0x06040001; ++ printk("PCIE0 enabled\n"); ++ } ++#endif ++#if defined (CONFIG_PCIE_PORT1) ++ //PCIe1 ++ if ((pcie_link_status & 0x2) != 0) { ++ RALINK_PCI1_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE ++ RALINK_PCI1_IMBASEBAR0_ADDR = MEMORY_BASE; ++ RALINK_PCI1_CLASS = 0x06040001; ++ printk("PCIE1 enabled\n"); ++ } ++#endif ++#if defined (CONFIG_PCIE_PORT2) ++ //PCIe2 ++ if ((pcie_link_status & 0x4) != 0) { ++ RALINK_PCI2_BAR0SETUP_ADDR = 0x7FFF0001; //open 7FFF:2G; ENABLE ++ RALINK_PCI2_IMBASEBAR0_ADDR = MEMORY_BASE; ++ RALINK_PCI2_CLASS = 0x06040001; ++ printk("PCIE2 enabled\n"); ++ } ++#endif ++ ++ ++ switch(pcie_link_status) { ++ case 7: ++ read_config(0, 2, 0, 0x4, &val); ++ write_config(0, 2, 0, 0x4, val|0x4); ++ // write_config(0, 1, 0, 0x4, val|0x7); ++ case 3: ++ case 5: ++ case 6: ++ read_config(0, 1, 0, 0x4, &val); ++ write_config(0, 1, 0, 0x4, val|0x4); ++ // write_config(0, 1, 0, 0x4, val|0x7); ++ default: ++ read_config(0, 0, 0, 0x4, &val); ++ write_config(0, 0, 0, 0x4, val|0x4); //bus master enable ++ // write_config(0, 0, 0, 0x4, val|0x7); //bus master enable ++ } ++ register_pci_controller(&rt2880_controller); ++ return 0; ++ ++} ++arch_initcall(init_rt2880pci); ++ ++int pcibios_plat_dev_init(struct pci_dev *dev) ++{ ++ return 0; ++} +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-3.14/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch new file mode 100644 index 0000000000..fc9a70baa2 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0017-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch @@ -0,0 +1,85 @@ +From f8da5caf65926d44581d4e7914b28ceab3d28a7c Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 14 Jul 2013 23:08:11 +0200 +Subject: [PATCH 17/57] MIPS: use set_mode() to enable/disable the cevt-r4k + irq + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/kernel/cevt-r4k.c | 37 +++++++++++++++++++++++++++++++------ + 1 file changed, 31 insertions(+), 6 deletions(-) + +diff --git a/arch/mips/kernel/cevt-r4k.c b/arch/mips/kernel/cevt-r4k.c +index 50d3f5a..99585e6 100644 +--- a/arch/mips/kernel/cevt-r4k.c ++++ b/arch/mips/kernel/cevt-r4k.c +@@ -38,12 +38,6 @@ static int mips_next_event(unsigned long delta, + + #endif /* CONFIG_MIPS_MT_SMTC */ + +-void mips_set_clock_mode(enum clock_event_mode mode, +- struct clock_event_device *evt) +-{ +- /* Nothing to do ... */ +-} +- + DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); + int cp0_timer_irq_installed; + +@@ -90,9 +84,38 @@ struct irqaction c0_compare_irqaction = { + .name = "timer", + }; + ++void mips_set_clock_mode(enum clock_event_mode mode, ++ struct clock_event_device *evt) ++{ ++#ifdef CONFIG_CEVT_SYSTICK_QUIRK ++ switch (mode) { ++ case CLOCK_EVT_MODE_ONESHOT: ++ if (cp0_timer_irq_installed) ++ break; ++ ++ cp0_timer_irq_installed = 1; ++ ++ setup_irq(evt->irq, &c0_compare_irqaction); ++ break; ++ ++ case CLOCK_EVT_MODE_SHUTDOWN: ++ if (!cp0_timer_irq_installed) ++ break; ++ ++ cp0_timer_irq_installed = 0; ++ free_irq(evt->irq, &c0_compare_irqaction); ++ break; ++ ++ default: ++ pr_err("Unhandeled mips clock_mode\n"); ++ break; ++ } ++#endif ++} + + void mips_event_handler(struct clock_event_device *dev) + { ++ + } + + /* +@@ -215,12 +238,14 @@ int r4k_clockevent_init(void) + #endif + clockevents_register_device(cd); + ++#ifndef CONFIG_CEVT_SYSTICK_QUIRK + if (cp0_timer_irq_installed) + return 0; + + cp0_timer_irq_installed = 1; + + setup_irq(irq, &c0_compare_irqaction); ++#endif + + return 0; + } +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0018-MIPS-ralink-workaround-DTB-memory-issue.patch b/target/linux/ramips/patches-3.14/0018-MIPS-ralink-workaround-DTB-memory-issue.patch new file mode 100644 index 0000000000..0f61933590 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0018-MIPS-ralink-workaround-DTB-memory-issue.patch @@ -0,0 +1,29 @@ +From 35297af46f17092785930f32a616331c8df8f75c Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Thu, 23 May 2013 18:50:56 +0200 +Subject: [PATCH 18/57] MIPS: ralink: workaround DTB memory issue + +If the DTB is too big a bug happens on boot when init ram is freed. +This is a temporary fix until the real cause is found. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/of.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c +index 1b81e8f..885cf50 100644 +--- a/arch/mips/ralink/of.c ++++ b/arch/mips/ralink/of.c +@@ -75,7 +75,7 @@ void __init device_tree_init(void) + unflatten_device_tree(); + + /* free the space reserved for the dt blob */ +- free_bootmem(base, size); ++ //free_bootmem(base, size); + } + + static int memory_dtb; +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0019-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch b/target/linux/ramips/patches-3.14/0019-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch new file mode 100644 index 0000000000..cec6e8fb02 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0019-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch @@ -0,0 +1,306 @@ +From 9de00286e20a5f5edc419698373010f1cb6ff0ce Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:25:02 +0100 +Subject: [PATCH 19/57] MIPS: ralink: add pseudo pwm led trigger based on + timer0 + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/timer.c | 213 ++++++++++++++++++++++++++++++++++++++++++---- + 1 file changed, 197 insertions(+), 16 deletions(-) + +diff --git a/arch/mips/ralink/timer.c b/arch/mips/ralink/timer.c +index e38692a..a71a7cb 100644 +--- a/arch/mips/ralink/timer.c ++++ b/arch/mips/ralink/timer.c +@@ -12,6 +12,8 @@ + #include <linux/timer.h> + #include <linux/of_gpio.h> + #include <linux/clk.h> ++#include <linux/leds.h> ++#include <linux/slab.h> + + #include <asm/mach-ralink/ralink_regs.h> + +@@ -23,16 +25,34 @@ + + #define TMR0CTL_ENABLE BIT(7) + #define TMR0CTL_MODE_PERIODIC BIT(4) +-#define TMR0CTL_PRESCALER 1 ++#define TMR0CTL_PRESCALER 2 + #define TMR0CTL_PRESCALE_VAL (0xf - TMR0CTL_PRESCALER) + #define TMR0CTL_PRESCALE_DIV (65536 / BIT(TMR0CTL_PRESCALER)) + ++struct rt_timer_gpio { ++ struct list_head list; ++ struct led_classdev *led; ++}; ++ + struct rt_timer { +- struct device *dev; +- void __iomem *membase; +- int irq; +- unsigned long timer_freq; +- unsigned long timer_div; ++ struct device *dev; ++ void __iomem *membase; ++ int irq; ++ ++ unsigned long timer_freq; ++ unsigned long timer_div; ++ ++ struct list_head gpios; ++ struct led_trigger led_trigger; ++ unsigned int duty_cycle; ++ unsigned int duty; ++ ++ unsigned int fade; ++ unsigned int fade_min; ++ unsigned int fade_max; ++ unsigned int fade_speed; ++ unsigned int fade_dir; ++ unsigned int fade_count; + }; + + static inline void rt_timer_w32(struct rt_timer *rt, u8 reg, u32 val) +@@ -48,18 +68,46 @@ static inline u32 rt_timer_r32(struct rt_timer *rt, u8 reg) + static irqreturn_t rt_timer_irq(int irq, void *_rt) + { + struct rt_timer *rt = (struct rt_timer *) _rt; ++ struct rt_timer_gpio *gpio; ++ unsigned int val; + +- rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div); ++ if (rt->fade && (rt->fade_count++ > rt->fade_speed)) { ++ rt->fade_count = 0; ++ if (rt->duty_cycle <= rt->fade_min) ++ rt->fade_dir = 1; ++ else if (rt->duty_cycle >= rt->fade_max) ++ rt->fade_dir = 0; ++ ++ if (rt->fade_dir) ++ rt->duty_cycle += 1; ++ else ++ rt->duty_cycle -= 1; ++ ++ } ++ ++ val = rt->timer_freq / rt->timer_div; ++ if (rt->duty) ++ val *= rt->duty_cycle; ++ else ++ val *= (100 - rt->duty_cycle); ++ val /= 100; ++ ++ if (!list_empty(&rt->gpios)) ++ list_for_each_entry(gpio, &rt->gpios, list) ++ led_set_brightness(gpio->led, !!rt->duty); ++ ++ rt->duty = !rt->duty; ++ ++ rt_timer_w32(rt, TIMER_REG_TMR0LOAD, val + 1); + rt_timer_w32(rt, TIMER_REG_TMRSTAT, TMRSTAT_TMR0INT); + + return IRQ_HANDLED; + } + +- + static int rt_timer_request(struct rt_timer *rt) + { +- int err = request_irq(rt->irq, rt_timer_irq, IRQF_DISABLED, +- dev_name(rt->dev), rt); ++ int err = devm_request_irq(rt->dev, rt->irq, rt_timer_irq, ++ IRQF_DISABLED, dev_name(rt->dev), rt); + if (err) { + dev_err(rt->dev, "failed to request irq\n"); + } else { +@@ -81,8 +129,6 @@ static int rt_timer_config(struct rt_timer *rt, unsigned long divisor) + else + rt->timer_div = divisor; + +- rt_timer_w32(rt, TIMER_REG_TMR0LOAD, rt->timer_freq / rt->timer_div); +- + return 0; + } + +@@ -108,11 +154,128 @@ static void rt_timer_disable(struct rt_timer *rt) + rt_timer_w32(rt, TIMER_REG_TMR0CTL, t); + } + ++static ssize_t led_fade_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct led_classdev *led_cdev = dev_get_drvdata(dev); ++ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger); ++ ++ return sprintf(buf, "speed: %d, min: %d, max: %d\n", rt->fade_speed, rt->fade_min, rt->fade_max); ++} ++ ++static ssize_t led_fade_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t size) ++{ ++ struct led_classdev *led_cdev = dev_get_drvdata(dev); ++ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger); ++ unsigned int speed = 0, min = 0, max = 0; ++ ssize_t ret = -EINVAL; ++ ++ ret = sscanf(buf, "%u %u %u", &speed, &min, &max); ++ ++ if (ret == 3) { ++ rt->fade_speed = speed; ++ rt->fade_min = min; ++ rt->fade_max = max; ++ rt->fade = 1; ++ } else { ++ rt->fade = 0; ++ } ++ ++ return size; ++} ++ ++static DEVICE_ATTR(fade, 0644, led_fade_show, led_fade_store); ++ ++static ssize_t led_duty_cycle_show(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ struct led_classdev *led_cdev = dev_get_drvdata(dev); ++ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger); ++ ++ return sprintf(buf, "%u\n", rt->duty_cycle); ++} ++ ++static ssize_t led_duty_cycle_store(struct device *dev, ++ struct device_attribute *attr, const char *buf, size_t size) ++{ ++ struct led_classdev *led_cdev = dev_get_drvdata(dev); ++ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger); ++ unsigned long state; ++ ssize_t ret = -EINVAL; ++ ++ ret = kstrtoul(buf, 10, &state); ++ if (ret) ++ return ret; ++ ++ if (state <= 100) ++ rt->duty_cycle = state; ++ else ++ rt->duty_cycle = 100; ++ ++ rt->fade = 0; ++ ++ return size; ++} ++ ++static DEVICE_ATTR(duty_cycle, 0644, led_duty_cycle_show, led_duty_cycle_store); ++ ++static void rt_timer_trig_activate(struct led_classdev *led_cdev) ++{ ++ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger); ++ struct rt_timer_gpio *gpio_data; ++ int rc; ++ ++ led_cdev->trigger_data = NULL; ++ gpio_data = kzalloc(sizeof(*gpio_data), GFP_KERNEL); ++ if (!gpio_data) ++ return; ++ ++ rc = device_create_file(led_cdev->dev, &dev_attr_duty_cycle); ++ if (rc) ++ goto err_gpio; ++ rc = device_create_file(led_cdev->dev, &dev_attr_fade); ++ if (rc) ++ goto err_out_duty_cycle; ++ ++ led_cdev->activated = true; ++ led_cdev->trigger_data = gpio_data; ++ gpio_data->led = led_cdev; ++ list_add(&gpio_data->list, &rt->gpios); ++ led_cdev->trigger_data = gpio_data; ++ rt_timer_enable(rt); ++ return; ++ ++err_out_duty_cycle: ++ device_remove_file(led_cdev->dev, &dev_attr_duty_cycle); ++ ++err_gpio: ++ kfree(gpio_data); ++} ++ ++static void rt_timer_trig_deactivate(struct led_classdev *led_cdev) ++{ ++ struct rt_timer *rt = container_of(led_cdev->trigger, struct rt_timer, led_trigger); ++ struct rt_timer_gpio *gpio_data = (struct rt_timer_gpio*) led_cdev->trigger_data; ++ ++ if (led_cdev->activated) { ++ device_remove_file(led_cdev->dev, &dev_attr_duty_cycle); ++ device_remove_file(led_cdev->dev, &dev_attr_fade); ++ led_cdev->activated = false; ++ } ++ ++ list_del(&gpio_data->list); ++ rt_timer_disable(rt); ++ led_set_brightness(led_cdev, LED_OFF); ++} ++ + static int rt_timer_probe(struct platform_device *pdev) + { + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ const __be32 *divisor; + struct rt_timer *rt; + struct clk *clk; ++ int ret; + + rt = devm_kzalloc(&pdev->dev, sizeof(*rt), GFP_KERNEL); + if (!rt) { +@@ -140,12 +303,29 @@ static int rt_timer_probe(struct platform_device *pdev) + if (!rt->timer_freq) + return -EINVAL; + ++ rt->duty_cycle = 100; + rt->dev = &pdev->dev; + platform_set_drvdata(pdev, rt); + +- rt_timer_request(rt); +- rt_timer_config(rt, 2); +- rt_timer_enable(rt); ++ ret = rt_timer_request(rt); ++ if (ret) ++ return ret; ++ ++ divisor = of_get_property(pdev->dev.of_node, "ralink,divisor", NULL); ++ if (divisor) ++ rt_timer_config(rt, be32_to_cpu(*divisor)); ++ else ++ rt_timer_config(rt, 200); ++ ++ rt->led_trigger.name = "pwmtimer", ++ rt->led_trigger.activate = rt_timer_trig_activate, ++ rt->led_trigger.deactivate = rt_timer_trig_deactivate, ++ ++ ret = led_trigger_register(&rt->led_trigger); ++ if (ret) ++ return ret; ++ ++ INIT_LIST_HEAD(&rt->gpios); + + dev_info(&pdev->dev, "maximum frequency is %luHz\n", rt->timer_freq); + +@@ -156,6 +336,7 @@ static int rt_timer_remove(struct platform_device *pdev) + { + struct rt_timer *rt = platform_get_drvdata(pdev); + ++ led_trigger_unregister(&rt->led_trigger); + rt_timer_disable(rt); + rt_timer_free(rt); + +@@ -180,6 +361,6 @@ static struct platform_driver rt_timer_driver = { + + module_platform_driver(rt_timer_driver); + +-MODULE_DESCRIPTION("Ralink RT2880 timer"); ++MODULE_DESCRIPTION("Ralink RT2880 timer / pseudo pwm"); + MODULE_AUTHOR("John Crispin <blogic@openwrt.org"); + MODULE_LICENSE("GPL"); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0020-MIPS-ralink-update-dts-files.patch b/target/linux/ramips/patches-3.14/0020-MIPS-ralink-update-dts-files.patch new file mode 100644 index 0000000000..52fd3211c2 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0020-MIPS-ralink-update-dts-files.patch @@ -0,0 +1,638 @@ +From 0c1e8630dca36c2d5a9bf98a5f1f8c15f75d0253 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 12 Aug 2013 18:11:33 +0200 +Subject: [PATCH 20/57] MIPS: ralink: update dts files + +Add the devicetree nodes needed to make the newly merged drivers work. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/dts/mt7620a.dtsi | 135 +++++++++++++++++++++++ + arch/mips/ralink/dts/rt3050.dtsi | 156 ++++++++++++++++++++++++++ + arch/mips/ralink/dts/rt3883.dtsi | 219 +++++++++++++++++++++++++++++++++++++ + 3 files changed, 510 insertions(+) + +diff --git a/arch/mips/ralink/dts/mt7620a.dtsi b/arch/mips/ralink/dts/mt7620a.dtsi +index 08bf24f..df6cb79 100644 +--- a/arch/mips/ralink/dts/mt7620a.dtsi ++++ b/arch/mips/ralink/dts/mt7620a.dtsi +@@ -29,10 +29,32 @@ + reg = <0x0 0x100>; + }; + ++ timer@100 { ++ compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer"; ++ reg = <0x100 0x20>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <1>; ++ }; ++ ++ watchdog@120 { ++ compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt"; ++ reg = <0x120 0x10>; ++ ++ resets = <&rstctrl 8>; ++ reset-names = "wdt"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <1>; ++ }; ++ + intc: intc@200 { + compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + ++ resets = <&rstctrl 19>; ++ reset-names = "intc"; ++ + interrupt-controller; + #interrupt-cells = <1>; + +@@ -43,16 +65,129 @@ + memc@300 { + compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; ++ ++ resets = <&rstctrl 20>; ++ reset-names = "mc"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <3>; ++ }; ++ ++ uart@500 { ++ compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a"; ++ reg = <0x500 0x100>; ++ ++ resets = <&rstctrl 12>; ++ reset-names = "uart"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <5>; ++ ++ reg-shift = <2>; ++ ++ status = "disabled"; ++ }; ++ ++ gpio0: gpio@600 { ++ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; ++ reg = <0x600 0x34>; ++ ++ resets = <&rstctrl 13>; ++ reset-names = "pio"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <6>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ ralink,gpio-base = <0>; ++ ralink,num-gpios = <24>; ++ ralink,register-map = [ 00 04 08 0c ++ 20 24 28 2c ++ 30 34 ]; ++ ++ status = "disabled"; ++ }; ++ ++ gpio1: gpio@638 { ++ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; ++ reg = <0x638 0x24>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <6>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ ralink,gpio-base = <24>; ++ ralink,num-gpios = <16>; ++ ralink,register-map = [ 00 04 08 0c ++ 10 14 18 1c ++ 20 24 ]; ++ ++ status = "disabled"; ++ }; ++ ++ gpio2: gpio@660 { ++ compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; ++ reg = <0x660 0x24>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <6>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ ralink,gpio-base = <40>; ++ ralink,num-gpios = <32>; ++ ralink,register-map = [ 00 04 08 0c ++ 10 14 18 1c ++ 20 24 ]; ++ ++ status = "disabled"; ++ }; ++ ++ spi@b00 { ++ compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi"; ++ reg = <0xb00 0x100>; ++ ++ resets = <&rstctrl 18>; ++ reset-names = "spi"; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,mt7620a-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + ++ resets = <&rstctrl 19>; ++ reset-names = "uartl"; ++ + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; ++ ++ systick@d00 { ++ compatible = "ralink,mt7620a-systick", "ralink,cevt-systick"; ++ reg = <0xd00 0x10>; ++ ++ resets = <&rstctrl 28>; ++ reset-names = "intc"; ++ ++ interrupt-parent = <&cpuintc>; ++ interrupts = <7>; ++ }; ++ }; ++ ++ rstctrl: rstctrl { ++ compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset"; ++ #reset-cells = <1>; + }; + }; +diff --git a/arch/mips/ralink/dts/rt3050.dtsi b/arch/mips/ralink/dts/rt3050.dtsi +index e3203d4..49622d7 100644 +--- a/arch/mips/ralink/dts/rt3050.dtsi ++++ b/arch/mips/ralink/dts/rt3050.dtsi +@@ -9,6 +9,10 @@ + }; + }; + ++ chosen { ++ bootargs = "console=ttyS0,57600"; ++ }; ++ + cpuintc: cpuintc@0 { + #address-cells = <0>; + #interrupt-cells = <1>; +@@ -29,10 +33,32 @@ + reg = <0x0 0x100>; + }; + ++ timer@100 { ++ compatible = "ralink,rt3052-timer", "ralink,rt2880-timer"; ++ reg = <0x100 0x20>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <1>; ++ }; ++ ++ watchdog@120 { ++ compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt"; ++ reg = <0x120 0x10>; ++ ++ resets = <&rstctrl 8>; ++ reset-names = "wdt"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <1>; ++ }; ++ + intc: intc@200 { + compatible = "ralink,rt3052-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + ++ resets = <&rstctrl 19>; ++ reset-names = "intc"; ++ + interrupt-controller; + #interrupt-cells = <1>; + +@@ -43,17 +69,144 @@ + memc@300 { + compatible = "ralink,rt3052-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; ++ ++ resets = <&rstctrl 20>; ++ reset-names = "mc"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <3>; ++ }; ++ ++ uart@500 { ++ compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a"; ++ reg = <0x500 0x100>; ++ ++ resets = <&rstctrl 12>; ++ reset-names = "uart"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <5>; ++ ++ reg-shift = <2>; ++ ++ status = "disabled"; ++ }; ++ ++ gpio0: gpio@600 { ++ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; ++ reg = <0x600 0x34>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ ralink,gpio-base = <0>; ++ ralink,num-gpios = <24>; ++ ralink,register-map = [ 00 04 08 0c ++ 20 24 28 2c ++ 30 34 ]; ++ ++ resets = <&rstctrl 13>; ++ reset-names = "pio"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <6>; ++ ++ status = "disabled"; ++ }; ++ ++ gpio1: gpio@638 { ++ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; ++ reg = <0x638 0x24>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ ralink,gpio-base = <24>; ++ ralink,num-gpios = <16>; ++ ralink,register-map = [ 00 04 08 0c ++ 10 14 18 1c ++ 20 24 ]; ++ ++ status = "disabled"; ++ }; ++ ++ gpio2: gpio@660 { ++ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio"; ++ reg = <0x660 0x24>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ ralink,gpio-base = <40>; ++ ralink,num-gpios = <12>; ++ ralink,register-map = [ 00 04 08 0c ++ 10 14 18 1c ++ 20 24 ]; ++ ++ status = "disabled"; ++ }; ++ ++ spi@b00 { ++ compatible = "ralink,rt3050-spi", "ralink,rt2880-spi"; ++ reg = <0xb00 0x100>; ++ ++ resets = <&rstctrl 18>; ++ reset-names = "spi"; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + ++ resets = <&rstctrl 19>; ++ reset-names = "uartl"; ++ + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; ++ ++ }; ++ ++ rstctrl: rstctrl { ++ compatible = "ralink,rt3050-reset", "ralink,rt2880-reset"; ++ #reset-cells = <1>; ++ }; ++ ++ ethernet@10100000 { ++ compatible = "ralink,rt3050-eth"; ++ reg = <0x10100000 10000>; ++ ++ interrupt-parent = <&cpuintc>; ++ interrupts = <5>; ++ ++ status = "disabled"; ++ }; ++ ++ esw@10110000 { ++ compatible = "ralink,rt3050-esw"; ++ reg = <0x10110000 8000>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <17>; ++ ++ status = "disabled"; ++ }; ++ ++ wmac@10180000 { ++ compatible = "ralink,rt3050-wmac", "ralink,rt2880-wmac"; ++ reg = <0x10180000 40000>; ++ ++ interrupt-parent = <&cpuintc>; ++ interrupts = <6>; ++ ++ status = "disabled"; + }; + + usb@101c0000 { +@@ -63,6 +216,9 @@ + interrupt-parent = <&intc>; + interrupts = <18>; + ++ resets = <&rstctrl 22>; ++ reset-names = "otg"; ++ + status = "disabled"; + }; + }; +diff --git a/arch/mips/ralink/dts/rt3883.dtsi b/arch/mips/ralink/dts/rt3883.dtsi +index 3b131dd..4d092b1 100644 +--- a/arch/mips/ralink/dts/rt3883.dtsi ++++ b/arch/mips/ralink/dts/rt3883.dtsi +@@ -29,10 +29,32 @@ + reg = <0x0 0x100>; + }; + ++ timer@100 { ++ compatible = "ralink,rt3883-timer", "ralink,rt2880-timer"; ++ reg = <0x100 0x20>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <1>; ++ }; ++ ++ watchdog@120 { ++ compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt"; ++ reg = <0x120 0x10>; ++ ++ resets = <&rstctrl 8>; ++ reset-names = "wdt"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <1>; ++ }; ++ + intc: intc@200 { + compatible = "ralink,rt3883-intc", "ralink,rt2880-intc"; + reg = <0x200 0x100>; + ++ resets = <&rstctrl 19>; ++ reset-names = "intc"; ++ + interrupt-controller; + #interrupt-cells = <1>; + +@@ -43,16 +65,213 @@ + memc@300 { + compatible = "ralink,rt3883-memc", "ralink,rt3050-memc"; + reg = <0x300 0x100>; ++ ++ resets = <&rstctrl 20>; ++ reset-names = "mc"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <3>; ++ }; ++ ++ uart@500 { ++ compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a"; ++ reg = <0x500 0x100>; ++ ++ resets = <&rstctrl 12>; ++ reset-names = "uart"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <5>; ++ ++ reg-shift = <2>; ++ ++ status = "disabled"; ++ }; ++ ++ gpio0: gpio@600 { ++ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; ++ reg = <0x600 0x34>; ++ ++ resets = <&rstctrl 13>; ++ reset-names = "pio"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <6>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ ralink,gpio-base = <0>; ++ ralink,num-gpios = <24>; ++ ralink,register-map = [ 00 04 08 0c ++ 20 24 28 2c ++ 30 34 ]; ++ ++ status = "disabled"; ++ }; ++ ++ gpio1: gpio@638 { ++ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; ++ reg = <0x638 0x24>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ ralink,gpio-base = <24>; ++ ralink,num-gpios = <16>; ++ ralink,register-map = [ 00 04 08 0c ++ 10 14 18 1c ++ 20 24 ]; ++ ++ status = "disabled"; ++ }; ++ ++ gpio2: gpio@660 { ++ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; ++ reg = <0x660 0x24>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ ralink,gpio-base = <40>; ++ ralink,num-gpios = <32>; ++ ralink,register-map = [ 00 04 08 0c ++ 10 14 18 1c ++ 20 24 ]; ++ ++ status = "disabled"; ++ }; ++ ++ gpio3: gpio@688 { ++ compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; ++ reg = <0x688 0x24>; ++ ++ gpio-controller; ++ #gpio-cells = <2>; ++ ++ ralink,gpio-base = <72>; ++ ralink,num-gpios = <24>; ++ ralink,register-map = [ 00 04 08 0c ++ 10 14 18 1c ++ 20 24 ]; ++ ++ status = "disabled"; ++ }; ++ ++ spi0: spi@b00 { ++ compatible = "ralink,rt3883-spi", "ralink,rt2880-spi"; ++ reg = <0xb00 0x100>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ resets = <&rstctrl 18>; ++ reset-names = "spi"; ++ ++ status = "disabled"; + }; + + uartlite@c00 { + compatible = "ralink,rt3883-uart", "ralink,rt2880-uart", "ns16550a"; + reg = <0xc00 0x100>; + ++ resets = <&rstctrl 19>; ++ reset-names = "uartl"; ++ + interrupt-parent = <&intc>; + interrupts = <12>; + + reg-shift = <2>; + }; + }; ++ ++ rstctrl: rstctrl { ++ compatible = "ralink,rt3883-reset", "ralink,rt2880-reset"; ++ #reset-cells = <1>; ++ }; ++ ++ pci@10140000 { ++ compatible = "ralink,rt3883-pci"; ++ reg = <0x10140000 0x20000>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; /* direct mapping */ ++ ++ status = "disabled"; ++ ++ pciintc: interrupt-controller { ++ interrupt-controller; ++ #address-cells = <0>; ++ #interrupt-cells = <1>; ++ ++ interrupt-parent = <&cpuintc>; ++ interrupts = <4>; ++ }; ++ ++ host-bridge { ++ #address-cells = <3>; ++ #size-cells = <2>; ++ #interrupt-cells = <1>; ++ ++ device_type = "pci"; ++ ++ bus-range = <0 255>; ++ ranges = < ++ 0x02000000 0 0x00000000 0x20000000 0 0x10000000 /* pci memory */ ++ 0x01000000 0 0x00000000 0x10160000 0 0x00010000 /* io space */ ++ >; ++ ++ interrupt-map-mask = <0xf800 0 0 7>; ++ interrupt-map = < ++ /* IDSEL 17 */ ++ 0x8800 0 0 1 &pciintc 18 ++ 0x8800 0 0 2 &pciintc 18 ++ 0x8800 0 0 3 &pciintc 18 ++ 0x8800 0 0 4 &pciintc 18 ++ /* IDSEL 18 */ ++ 0x9000 0 0 1 &pciintc 19 ++ 0x9000 0 0 2 &pciintc 19 ++ 0x9000 0 0 3 &pciintc 19 ++ 0x9000 0 0 4 &pciintc 19 ++ >; ++ ++ pci-bridge@1 { ++ reg = <0x0800 0 0 0 0>; ++ device_type = "pci"; ++ #interrupt-cells = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ status = "disabled"; ++ ++ ralink,pci-slot = <1>; ++ ++ interrupt-map-mask = <0x0 0 0 0>; ++ interrupt-map = <0x0 0 0 0 &pciintc 20>; ++ }; ++ ++ pci-slot@17 { ++ reg = <0x8800 0 0 0 0>; ++ device_type = "pci"; ++ #interrupt-cells = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ ralink,pci-slot = <17>; ++ ++ status = "disabled"; ++ }; ++ ++ pci-slot@18 { ++ reg = <0x9000 0 0 0 0>; ++ device_type = "pci"; ++ #interrupt-cells = <1>; ++ #address-cells = <3>; ++ #size-cells = <2>; ++ ++ ralink,pci-slot = <18>; ++ ++ status = "disabled"; ++ }; ++ }; ++ }; + }; +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0021-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-3.14/0021-MIPS-ralink-add-cpu-frequency-scaling.patch new file mode 100644 index 0000000000..d60d651fb8 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0021-MIPS-ralink-add-cpu-frequency-scaling.patch @@ -0,0 +1,100 @@ +From e76ecd496c9b074ab21b17f12494d823a407e89a Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 28 Jul 2013 16:26:41 +0200 +Subject: [PATCH 21/57] MIPS: ralink: add cpu frequency scaling + +This feature will break udelay() and cause the delay loop to have longer delays +when the frequency is scaled causing a performance hit. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/cevt-rt3352.c | 36 ++++++++++++++++++++++++++++++++++++ + 1 file changed, 36 insertions(+) + +diff --git a/arch/mips/ralink/cevt-rt3352.c b/arch/mips/ralink/cevt-rt3352.c +index 24bf057..4174b40 100644 +--- a/arch/mips/ralink/cevt-rt3352.c ++++ b/arch/mips/ralink/cevt-rt3352.c +@@ -29,6 +29,10 @@ + /* enable the counter */ + #define CFG_CNT_EN 0x1 + ++/* mt7620 frequency scaling defines */ ++#define CLK_LUT_CFG 0x40 ++#define SLEEP_EN BIT(31) ++ + struct systick_device { + void __iomem *membase; + struct clock_event_device dev; +@@ -36,6 +40,8 @@ struct systick_device { + int freq_scale; + }; + ++static void (*systick_freq_scaling)(struct systick_device *sdev, int status); ++ + static void systick_set_clock_mode(enum clock_event_mode mode, + struct clock_event_device *evt); + +@@ -87,6 +93,21 @@ static struct irqaction systick_irqaction = { + .dev_id = &systick.dev, + }; + ++static inline void mt7620_freq_scaling(struct systick_device *sdev, int status) ++{ ++ if (sdev->freq_scale == status) ++ return; ++ ++ sdev->freq_scale = status; ++ ++ pr_info("%s: %s autosleep mode\n", systick.dev.name, ++ (status) ? ("enable") : ("disable")); ++ if (status) ++ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG); ++ else ++ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG); ++} ++ + static void systick_set_clock_mode(enum clock_event_mode mode, + struct clock_event_device *evt) + { +@@ -101,9 +122,13 @@ static void systick_set_clock_mode(enum clock_event_mode mode, + sdev->irq_requested = 1; + iowrite32(CFG_EXT_STK_EN | CFG_CNT_EN, + systick.membase + SYSTICK_CONFIG); ++ if (systick_freq_scaling) ++ systick_freq_scaling(sdev, 1); + break; + + case CLOCK_EVT_MODE_SHUTDOWN: ++ if (systick_freq_scaling) ++ systick_freq_scaling(sdev, 0); + if (sdev->irq_requested) + free_irq(systick.dev.irq, &systick_irqaction); + sdev->irq_requested = 0; +@@ -116,12 +141,23 @@ static void systick_set_clock_mode(enum clock_event_mode mode, + } + } + ++static const struct of_device_id systick_match[] = { ++ { .compatible = "ralink,mt7620-systick", .data = mt7620_freq_scaling}, ++ {}, ++}; ++ + static void __init ralink_systick_init(struct device_node *np) + { ++ const struct of_device_id *match; ++ + systick.membase = of_iomap(np, 0); + if (!systick.membase) + return; + ++ match = of_match_node(systick_match, np); ++ if (match) ++ systick_freq_scaling = match->data; ++ + systick_irqaction.name = np->name; + systick.dev.name = np->name; + clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0022-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch b/target/linux/ramips/patches-3.14/0022-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch new file mode 100644 index 0000000000..8ce47a9e1a --- /dev/null +++ b/target/linux/ramips/patches-3.14/0022-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch @@ -0,0 +1,26 @@ +From ec26251ea980b1ee88733f178a4e86e3c70fd244 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 4 Aug 2014 18:46:02 +0200 +Subject: [PATCH 22/57] MIPS: ralink: copy the commandline from the devicetree + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/of.c | 2 ++ + 1 file changed, 2 insertions(+) + +diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c +index 885cf50..405b79c 100644 +--- a/arch/mips/ralink/of.c ++++ b/arch/mips/ralink/of.c +@@ -99,6 +99,8 @@ void __init plat_mem_setup(void) + */ + __dt_setup_arch(&__dtb_start); + ++ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); ++ + of_scan_flat_dt(early_init_dt_find_memory, NULL); + if (memory_dtb) + of_scan_flat_dt(early_init_dt_scan_memory, NULL); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0023-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch b/target/linux/ramips/patches-3.14/0023-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch new file mode 100644 index 0000000000..c6bf547bc1 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0023-MIPS-ralink-mt7620-fix-usb-issue-during-frequency-sc.patch @@ -0,0 +1,57 @@ +From 1f1c12e85defba9459b41ec95b86f23b4791f1ab Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 4 Aug 2014 20:43:25 +0200 +Subject: [PATCH 23/57] MIPS: ralink: mt7620: fix usb issue during frequency + scaling + + If the USB HCD is running and the cpu is scaled too low, then the USB stops + working. Increase the idle speed of the core to fix this if the kernel is + built with USB support. + + The values are taken from the Ralink SDK Kernel. + + Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/mt7620.c | 19 +++++++++++++++++++ + 1 file changed, 19 insertions(+) + +diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c +index c883973..d68b8ff 100644 +--- a/arch/mips/ralink/mt7620.c ++++ b/arch/mips/ralink/mt7620.c +@@ -36,6 +36,12 @@ + #define PMU1_CFG 0x8C + #define DIG_SW_SEL BIT(25) + ++/* clock scaling */ ++#define CLKCFG_FDIV_MASK 0x1f00 ++#define CLKCFG_FDIV_USB_VAL 0x0300 ++#define CLKCFG_FFRAC_MASK 0x001f ++#define CLKCFG_FFRAC_USB_VAL 0x0003 ++ + /* does the board have sdram or ddram */ + static int dram_type; + +@@ -337,6 +343,19 @@ void __init ralink_clk_init(void) + ralink_clk_add("10000b00.spi", sys_rate); + ralink_clk_add("10000c00.uartlite", periph_rate); + ralink_clk_add("10180000.wmac", xtal_rate); ++ ++ if (IS_ENABLED(CONFIG_USB)) { ++ /* ++ * When the CPU goes into sleep mode, the BUS clock will be too low for ++ * USB to function properly ++ */ ++ u32 val = rt_sysc_r32(SYSC_REG_CPU_SYS_CLKCFG); ++ ++ val &= ~(CLKCFG_FDIV_MASK | CLKCFG_FFRAC_MASK); ++ val |= CLKCFG_FDIV_USB_VAL | CLKCFG_FFRAC_USB_VAL; ++ ++ rt_sysc_w32(val, SYSC_REG_CPU_SYS_CLKCFG); ++ } + } + + void __init ralink_of_remap(void) +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0024-MIPS-ralink-add-mt7628an-devicetree-files.patch b/target/linux/ramips/patches-3.14/0024-MIPS-ralink-add-mt7628an-devicetree-files.patch new file mode 100644 index 0000000000..b1814f4860 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0024-MIPS-ralink-add-mt7628an-devicetree-files.patch @@ -0,0 +1,292 @@ +From fbc9fb0c2d30f2141e1b0b824f473276c3aef528 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Wed, 6 Aug 2014 17:53:24 +0200 +Subject: [PATCH 24/57] MIPS: ralink: add mt7628an devicetree files + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/Kconfig | 4 + + arch/mips/ralink/dts/Makefile | 1 + + arch/mips/ralink/dts/mt7628an.dtsi | 184 ++++++++++++++++++++++++++++++++ + arch/mips/ralink/dts/mt7628an_eval.dts | 54 ++++++++++ + 4 files changed, 243 insertions(+) + create mode 100644 arch/mips/ralink/dts/mt7628an.dtsi + create mode 100644 arch/mips/ralink/dts/mt7628an_eval.dts + +diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig +index 6a04360..9174dbc 100644 +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -75,6 +75,10 @@ choice + bool "MT7620A eval kit" + depends on SOC_MT7620 + ++ config DTB_MT7628AN_EVAL ++ bool "MT7620A eval kit" ++ depends on SOC_MT7620 ++ + config DTB_MT7621_EVAL + bool "MT7621 eval kit" + depends on SOC_MT7621 +diff --git a/arch/mips/ralink/dts/Makefile b/arch/mips/ralink/dts/Makefile +index 9742c73..9f4e1c7 100644 +--- a/arch/mips/ralink/dts/Makefile ++++ b/arch/mips/ralink/dts/Makefile +@@ -3,3 +3,4 @@ obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o + obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o + obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o + obj-$(CONFIG_DTB_MT7621_EVAL) := mt7621_eval.dtb.o ++obj-$(CONFIG_DTB_MT7628AN_EVAL) := mt7628an_eval.dtb.o +diff --git a/arch/mips/ralink/dts/mt7628an.dtsi b/arch/mips/ralink/dts/mt7628an.dtsi +new file mode 100644 +index 0000000..fd17d0a +--- /dev/null ++++ b/arch/mips/ralink/dts/mt7628an.dtsi +@@ -0,0 +1,184 @@ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "ralink,mtk7628an-soc"; ++ ++ cpus { ++ cpu@0 { ++ compatible = "mips,mips24KEc"; ++ }; ++ }; ++ ++ cpuintc: cpuintc@0 { ++ #address-cells = <0>; ++ #interrupt-cells = <1>; ++ interrupt-controller; ++ compatible = "mti,cpu-interrupt-controller"; ++ }; ++ ++ palmbus@10000000 { ++ compatible = "palmbus"; ++ reg = <0x10000000 0x200000>; ++ ranges = <0x0 0x10000000 0x1FFFFF>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ sysc@0 { ++ compatible = "ralink,mt7620a-sysc"; ++ reg = <0x0 0x100>; ++ }; ++ ++ watchdog@120 { ++ compatible = "ralink,mt7628an-wdt", "mtk,mt7621-wdt"; ++ reg = <0x120 0x10>; ++ ++ resets = <&rstctrl 8>; ++ reset-names = "wdt"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <24>; ++ }; ++ ++ intc: intc@200 { ++ compatible = "ralink,mt7628an-intc", "ralink,rt2880-intc"; ++ reg = <0x200 0x100>; ++ ++ resets = <&rstctrl 9>; ++ reset-names = "intc"; ++ ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ ++ interrupt-parent = <&cpuintc>; ++ interrupts = <2>; ++ ++ ralink,intc-registers = <0x9c 0xa0 ++ 0x6c 0xa4 ++ 0x80 0x78>; ++ }; ++ ++ memc@300 { ++ compatible = "ralink,mt7620a-memc", "ralink,rt3050-memc"; ++ reg = <0x300 0x100>; ++ ++ resets = <&rstctrl 20>; ++ reset-names = "mc"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <3>; ++ }; ++ ++ gpio@600 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ compatible = "mtk,mt7628-gpio", "mtk,mt7621-gpio"; ++ reg = <0x600 0x100>; ++ ++ gpio0: bank@0 { ++ reg = <0>; ++ compatible = "mtk,mt7621-gpio-bank"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ gpio1: bank@1 { ++ reg = <1>; ++ compatible = "mtk,mt7621-gpio-bank"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ gpio2: bank@2 { ++ reg = <2>; ++ compatible = "mtk,mt7621-gpio-bank"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ }; ++ ++ spi@b00 { ++ compatible = "ralink,mt7621-spi"; ++ reg = <0xb00 0x100>; ++ ++ resets = <&rstctrl 18>; ++ reset-names = "spi"; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_pins>; ++ ++ status = "disabled"; ++ }; ++ ++ uartlite@c00 { ++ compatible = "ns16550a"; ++ reg = <0xc00 0x100>; ++ ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ no-loopback-test; ++ ++ resets = <&rstctrl 12>; ++ reset-names = "uartl"; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <20>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart0_pins>; ++ }; ++ }; ++ ++ pinctrl { ++ compatible = "ralink,rt2880-pinmux"; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&state_default>; ++ state_default: pinctrl0 { ++ }; ++ spi_pins: spi { ++ spi { ++ ralink,group = "spi"; ++ ralink,function = "spi"; ++ }; ++ }; ++ uart0_pins: uartlite { ++ uart { ++ ralink,group = "uart0"; ++ ralink,function = "uart"; ++ }; ++ }; ++ }; ++ ++ rstctrl: rstctrl { ++ compatible = "ralink,mt7620a-reset", "ralink,rt2880-reset"; ++ #reset-cells = <1>; ++ }; ++ ++ usbphy { ++ compatible = "ralink,mt7628an-usbphy", "ralink,mt7620a-usbphy"; ++ ++ resets = <&rstctrl 22>; ++ reset-names = "host"; ++ }; ++ ++ ehci@101c0000 { ++ compatible = "ralink,rt3xxx-ehci"; ++ reg = <0x101c0000 0x1000>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <18>; ++ }; ++ ++ ohci@101c1000 { ++ compatible = "ralink,rt3xxx-ohci"; ++ reg = <0x101c1000 0x1000>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <18>; ++ }; ++ ++}; +diff --git a/arch/mips/ralink/dts/mt7628an_eval.dts b/arch/mips/ralink/dts/mt7628an_eval.dts +new file mode 100644 +index 0000000..132c29e +--- /dev/null ++++ b/arch/mips/ralink/dts/mt7628an_eval.dts +@@ -0,0 +1,54 @@ ++/dts-v1/; ++ ++/include/ "mt7628an.dtsi" ++ ++/ { ++ compatible = "ralink,mt7628an-eval-board", "ralink,mt7628an-soc"; ++ model = "Ralink MT7628AN evaluation board"; ++ ++ memory@0 { ++ reg = <0x0 0x2000000>; ++ }; ++ ++ chosen { ++ bootargs = "console=ttyS0,57600 init=/init"; ++ }; ++ ++ palmbus@10000000 { ++ spi@b00 { ++ status = "okay"; ++ ++ m25p80@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "en25q64"; ++ reg = <0 0>; ++ linux,modalias = "m25p80", "en25q64"; ++ spi-max-frequency = <10000000>; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x0 0x30000>; ++ read-only; ++ }; ++ ++ partition@30000 { ++ label = "u-boot-env"; ++ reg = <0x30000 0x10000>; ++ read-only; ++ }; ++ ++ factory: partition@40000 { ++ label = "factory"; ++ reg = <0x40000 0x10000>; ++ read-only; ++ }; ++ ++ partition@50000 { ++ label = "firmware"; ++ reg = <0x50000 0x7b0000>; ++ }; ++ }; ++ }; ++ }; ++}; +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0025-MIPS-ralink-allow-loading-irq-registers-from-the-dev.patch b/target/linux/ramips/patches-3.14/0025-MIPS-ralink-allow-loading-irq-registers-from-the-dev.patch new file mode 100644 index 0000000000..3a114d0699 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0025-MIPS-ralink-allow-loading-irq-registers-from-the-dev.patch @@ -0,0 +1,80 @@ +From b1cc9a15f6ead8dbd849257e42d69a5799fb7597 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Wed, 6 Aug 2014 18:24:36 +0200 +Subject: [PATCH 25/57] MIPS: ralink: allow loading irq registers from the + devicetree + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/irq.c | 33 +++++++++++++++++++++++---------- + 1 file changed, 23 insertions(+), 10 deletions(-) + +diff --git a/arch/mips/ralink/irq.c b/arch/mips/ralink/irq.c +index 781b3d1..82c3146 100644 +--- a/arch/mips/ralink/irq.c ++++ b/arch/mips/ralink/irq.c +@@ -20,14 +20,6 @@ + + #include "common.h" + +-/* INTC register offsets */ +-#define INTC_REG_STATUS0 0x00 +-#define INTC_REG_STATUS1 0x04 +-#define INTC_REG_TYPE 0x20 +-#define INTC_REG_RAW_STATUS 0x30 +-#define INTC_REG_ENABLE 0x34 +-#define INTC_REG_DISABLE 0x38 +- + #define INTC_INT_GLOBAL BIT(31) + + #define RALINK_CPU_IRQ_INTC (MIPS_CPU_IRQ_BASE + 2) +@@ -44,16 +36,34 @@ + + #define RALINK_INTC_IRQ_PERFC (RALINK_INTC_IRQ_BASE + 9) + ++enum rt_intc_regs_enum { ++ INTC_REG_STATUS0 = 0, ++ INTC_REG_STATUS1, ++ INTC_REG_TYPE, ++ INTC_REG_RAW_STATUS, ++ INTC_REG_ENABLE, ++ INTC_REG_DISABLE, ++}; ++ ++static u32 rt_intc_regs[] = { ++ [INTC_REG_STATUS0] = 0x00, ++ [INTC_REG_STATUS1] = 0x04, ++ [INTC_REG_TYPE] = 0x20, ++ [INTC_REG_RAW_STATUS] = 0x30, ++ [INTC_REG_ENABLE] = 0x34, ++ [INTC_REG_DISABLE] = 0x38, ++}; ++ + static void __iomem *rt_intc_membase; + + static inline void rt_intc_w32(u32 val, unsigned reg) + { +- __raw_writel(val, rt_intc_membase + reg); ++ __raw_writel(val, rt_intc_membase + rt_intc_regs[reg]); + } + + static inline u32 rt_intc_r32(unsigned reg) + { +- return __raw_readl(rt_intc_membase + reg); ++ return __raw_readl(rt_intc_membase + rt_intc_regs[reg]); + } + + static void ralink_intc_irq_unmask(struct irq_data *d) +@@ -134,6 +144,9 @@ static int __init intc_of_init(struct device_node *node, + struct irq_domain *domain; + int irq; + ++ if (!of_property_read_u32_array(node, "ralink,intc-registers", rt_intc_regs, 6)) ++ pr_info("intc: using register map from devicetree\n"); ++ + irq = irq_of_parse_and_map(node, 0); + if (!irq) + panic("Failed to get INTC IRQ"); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0026-MIPS-ralink-add-mt7628an-support.patch b/target/linux/ramips/patches-3.14/0026-MIPS-ralink-add-mt7628an-support.patch new file mode 100644 index 0000000000..f5b2610e67 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0026-MIPS-ralink-add-mt7628an-support.patch @@ -0,0 +1,405 @@ +From a375beba066516ecafddebc765454ac6ec599f3d Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Wed, 6 Aug 2014 18:26:08 +0200 +Subject: [PATCH 26/57] MIPS: ralink: add mt7628an support + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/include/asm/mach-ralink/mt7620.h | 11 ++ + arch/mips/ralink/Kconfig | 2 +- + arch/mips/ralink/mt7620.c | 266 +++++++++++++++++++++++----- + 3 files changed, 232 insertions(+), 47 deletions(-) + +diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h +index 27b2fa9..c8590df 100644 +--- a/arch/mips/include/asm/mach-ralink/mt7620.h ++++ b/arch/mips/include/asm/mach-ralink/mt7620.h +@@ -13,6 +13,13 @@ + #ifndef _MT7620_REGS_H_ + #define _MT7620_REGS_H_ + ++enum mt762x_soc_type { ++ MT762X_SOC_UNKNOWN = 0, ++ MT762X_SOC_MT7620A, ++ MT762X_SOC_MT7620N, ++ MT762X_SOC_MT7628AN, ++}; ++ + #define MT7620_SYSC_BASE 0x10000000 + + #define SYSC_REG_CHIP_NAME0 0x00 +@@ -27,6 +34,7 @@ + + #define MT7620_CHIP_NAME0 0x3637544d + #define MT7620_CHIP_NAME1 0x20203032 ++#define MT7628_CHIP_NAME1 0x20203832 + + #define SYSCFG0_XTAL_FREQ_SEL BIT(6) + +@@ -71,6 +79,9 @@ + #define SYSCFG0_DRAM_TYPE_DDR1 1 + #define SYSCFG0_DRAM_TYPE_DDR2 2 + ++#define SYSCFG0_DRAM_TYPE_DDR2_MT7628 0 ++#define SYSCFG0_DRAM_TYPE_DDR1_MT7628 1 ++ + #define MT7620_DRAM_BASE 0x0 + #define MT7620_SDRAM_SIZE_MIN 2 + #define MT7620_SDRAM_SIZE_MAX 64 +diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig +index 9174dbc..f93835f 100644 +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -35,7 +35,7 @@ choice + select HW_HAS_PCI + + config SOC_MT7620 +- bool "MT7620" ++ bool "MT7620/8" + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI + +diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c +index d68b8ff..e590ccf 100644 +--- a/arch/mips/ralink/mt7620.c ++++ b/arch/mips/ralink/mt7620.c +@@ -42,6 +42,8 @@ + #define CLKCFG_FFRAC_MASK 0x001f + #define CLKCFG_FFRAC_USB_VAL 0x0003 + ++enum mt762x_soc_type mt762x_soc; ++ + /* does the board have sdram or ddram */ + static int dram_type; + +@@ -159,6 +161,125 @@ struct ralink_pinmux rt_gpio_pinmux = { + .uart_mask = MT7620_GPIO_MODE_UART0_MASK, + }; + ++static struct rt2880_pmx_func pwm1_grp_mt7628[] = { ++ FUNC("sdcx", 3, 19, 1), ++ FUNC("utif", 2, 19, 1), ++ FUNC("gpio", 1, 19, 1), ++ FUNC("pwm", 0, 19, 1), ++}; ++ ++static struct rt2880_pmx_func pwm0_grp_mt7628[] = { ++ FUNC("sdcx", 3, 18, 1), ++ FUNC("utif", 2, 18, 1), ++ FUNC("gpio", 1, 18, 1), ++ FUNC("pwm", 0, 18, 1), ++}; ++ ++static struct rt2880_pmx_func uart2_grp_mt7628[] = { ++ FUNC("sdcx", 3, 20, 2), ++ FUNC("pwm", 2, 20, 2), ++ FUNC("gpio", 1, 20, 2), ++ FUNC("uart", 0, 20, 2), ++}; ++ ++static struct rt2880_pmx_func uart1_grp_mt7628[] = { ++ FUNC("sdcx", 3, 45, 2), ++ FUNC("pwm", 2, 45, 2), ++ FUNC("gpio", 1, 45, 2), ++ FUNC("uart", 0, 45, 2), ++}; ++ ++static struct rt2880_pmx_func i2c_grp_mt7628[] = { ++ FUNC("-", 3, 4, 2), ++ FUNC("debug", 2, 4, 2), ++ FUNC("gpio", 1, 4, 2), ++ FUNC("i2c", 0, 4, 2), ++}; ++ ++static struct rt2880_pmx_func refclk_grp_mt7628[] = { FUNC("reclk", 0, 36, 1) }; ++static struct rt2880_pmx_func perst_grp_mt7628[] = { FUNC("perst", 0, 37, 1) }; ++static struct rt2880_pmx_func wdt_grp_mt7628[] = { FUNC("wdt", 0, 15, 38) }; ++static struct rt2880_pmx_func spi_grp_mt7628[] = { FUNC("spi", 0, 7, 4) }; ++ ++static struct rt2880_pmx_func sd_mode_grp_mt7628[] = { ++ FUNC("jtag", 3, 22, 8), ++ FUNC("utif", 2, 22, 8), ++ FUNC("gpio", 1, 22, 8), ++ FUNC("sdcx", 0, 22, 8), ++}; ++ ++static struct rt2880_pmx_func uart0_grp_mt7628[] = { ++ FUNC("-", 3, 12, 2), ++ FUNC("-", 2, 12, 2), ++ FUNC("gpio", 1, 12, 2), ++ FUNC("uart", 0, 12, 2), ++}; ++ ++static struct rt2880_pmx_func i2s_grp_mt7628[] = { ++ FUNC("antenna", 3, 0, 4), ++ FUNC("pcm", 2, 0, 4), ++ FUNC("gpio", 1, 0, 4), ++ FUNC("i2s", 0, 0, 4), ++}; ++ ++static struct rt2880_pmx_func spi_cs1_grp_mt7628[] = { ++ FUNC("-", 3, 6, 1), ++ FUNC("refclk", 2, 6, 1), ++ FUNC("gpio", 1, 6, 1), ++ FUNC("spi", 0, 6, 1), ++}; ++ ++static struct rt2880_pmx_func spis_grp_mt7628[] = { ++ FUNC("pwm", 3, 14, 4), ++ FUNC("util", 2, 14, 4), ++ FUNC("gpio", 1, 14, 4), ++ FUNC("spis", 0, 14, 4), ++}; ++ ++static struct rt2880_pmx_func gpio_grp_mt7628[] = { ++ FUNC("pcie", 3, 11, 1), ++ FUNC("refclk", 2, 11, 1), ++ FUNC("gpio", 1, 11, 1), ++ FUNC("gpio", 0, 11, 1), ++}; ++ ++#define MT7628_GPIO_MODE_MASK 0x3 ++ ++#define MT7628_GPIO_MODE_PWM1 30 ++#define MT7628_GPIO_MODE_PWM0 28 ++#define MT7628_GPIO_MODE_UART2 26 ++#define MT7628_GPIO_MODE_UART1 24 ++#define MT7628_GPIO_MODE_I2C 20 ++#define MT7628_GPIO_MODE_REFCLK 18 ++#define MT7628_GPIO_MODE_PERST 16 ++#define MT7628_GPIO_MODE_WDT 14 ++#define MT7628_GPIO_MODE_SPI 12 ++#define MT7628_GPIO_MODE_SDMODE 10 ++#define MT7628_GPIO_MODE_UART0 8 ++#define MT7628_GPIO_MODE_I2S 6 ++#define MT7628_GPIO_MODE_CS1 4 ++#define MT7628_GPIO_MODE_SPIS 2 ++#define MT7628_GPIO_MODE_GPIO 0 ++ ++static struct rt2880_pmx_group mt7628an_pinmux_data[] = { ++ GRP_G("pmw1", pwm1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM1), ++ GRP_G("pmw1", pwm0_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_PWM0), ++ GRP_G("uart2", uart2_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART2), ++ GRP_G("uart1", uart1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART1), ++ GRP_G("i2c", i2c_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_I2C), ++ GRP("refclk", refclk_grp_mt7628, 1, MT7628_GPIO_MODE_REFCLK), ++ GRP("perst", perst_grp_mt7628, 1, MT7628_GPIO_MODE_PERST), ++ GRP("wdt", wdt_grp_mt7628, 1, MT7628_GPIO_MODE_WDT), ++ GRP("spi", spi_grp_mt7628, 1, MT7628_GPIO_MODE_SPI), ++ GRP_G("sdmode", sd_mode_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_SDMODE), ++ GRP_G("uart0", uart0_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_UART0), ++ GRP_G("i2s", i2s_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_I2S), ++ GRP_G("spi cs1", spi_cs1_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_CS1), ++ GRP_G("spis", spis_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_SPIS), ++ GRP_G("gpio", gpio_grp_mt7628, MT7628_GPIO_MODE_MASK, 1, MT7628_GPIO_MODE_GPIO), ++ { 0 } ++}; ++ + static __init u32 + mt7620_calc_rate(u32 ref_rate, u32 mul, u32 div) + { +@@ -309,29 +430,42 @@ void __init ralink_clk_init(void) + + xtal_rate = mt7620_get_xtal_rate(); + +- cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate); +- pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate); +- +- cpu_rate = mt7620_get_cpu_rate(pll_rate); +- dram_rate = mt7620_get_dram_rate(pll_rate); +- sys_rate = mt7620_get_sys_rate(cpu_rate); +- periph_rate = mt7620_get_periph_rate(xtal_rate); +- + #define RFMT(label) label ":%lu.%03luMHz " + #define RINT(x) ((x) / 1000000) + #define RFRAC(x) (((x) / 1000) % 1000) + +- pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"), +- RINT(xtal_rate), RFRAC(xtal_rate), +- RINT(cpu_pll_rate), RFRAC(cpu_pll_rate), +- RINT(pll_rate), RFRAC(pll_rate)); ++ if (mt762x_soc == MT762X_SOC_MT7628AN) { ++ if (xtal_rate == MHZ(40)) ++ cpu_rate = MHZ(580); ++ else ++ cpu_rate = MHZ(575); ++ dram_rate = sys_rate = cpu_rate / 3; ++ periph_rate = MHZ(40); ++ ++ ralink_clk_add("10000d00.uartlite", periph_rate); ++ ralink_clk_add("10000e00.uartlite", periph_rate); ++ } else { ++ cpu_pll_rate = mt7620_get_cpu_pll_rate(xtal_rate); ++ pll_rate = mt7620_get_pll_rate(xtal_rate, cpu_pll_rate); ++ ++ cpu_rate = mt7620_get_cpu_rate(pll_rate); ++ dram_rate = mt7620_get_dram_rate(pll_rate); ++ sys_rate = mt7620_get_sys_rate(cpu_rate); ++ periph_rate = mt7620_get_periph_rate(xtal_rate); ++ ++ pr_debug(RFMT("XTAL") RFMT("CPU_PLL") RFMT("PLL"), ++ RINT(xtal_rate), RFRAC(xtal_rate), ++ RINT(cpu_pll_rate), RFRAC(cpu_pll_rate), ++ RINT(pll_rate), RFRAC(pll_rate)); ++ ++ ralink_clk_add("10000500.uart", periph_rate); ++ } + + pr_debug(RFMT("CPU") RFMT("DRAM") RFMT("SYS") RFMT("PERIPH"), + RINT(cpu_rate), RFRAC(cpu_rate), + RINT(dram_rate), RFRAC(dram_rate), + RINT(sys_rate), RFRAC(sys_rate), + RINT(periph_rate), RFRAC(periph_rate)); +- + #undef RFRAC + #undef RINT + #undef RFMT +@@ -339,12 +473,11 @@ void __init ralink_clk_init(void) + ralink_clk_add("cpu", cpu_rate); + ralink_clk_add("10000100.timer", periph_rate); + ralink_clk_add("10000120.watchdog", periph_rate); +- ralink_clk_add("10000500.uart", periph_rate); + ralink_clk_add("10000b00.spi", sys_rate); + ralink_clk_add("10000c00.uartlite", periph_rate); + ralink_clk_add("10180000.wmac", xtal_rate); + +- if (IS_ENABLED(CONFIG_USB)) { ++ if (IS_ENABLED(CONFIG_USB) && mt762x_soc != MT762X_SOC_MT7628AN) { + /* + * When the CPU goes into sleep mode, the BUS clock will be too low for + * USB to function properly +@@ -367,6 +500,52 @@ void __init ralink_of_remap(void) + panic("Failed to remap core resources"); + } + ++static __init void ++mt7620_dram_init(struct ralink_soc_info *soc_info) ++{ ++ switch (dram_type) { ++ case SYSCFG0_DRAM_TYPE_SDRAM: ++ pr_info("Board has SDRAM\n"); ++ soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN; ++ soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX; ++ break; ++ ++ case SYSCFG0_DRAM_TYPE_DDR1: ++ pr_info("Board has DDR1\n"); ++ soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; ++ soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; ++ break; ++ ++ case SYSCFG0_DRAM_TYPE_DDR2: ++ pr_info("Board has DDR2\n"); ++ soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; ++ soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; ++ break; ++ default: ++ BUG(); ++ } ++} ++ ++static __init void ++mt7628_dram_init(struct ralink_soc_info *soc_info) ++{ ++ switch (dram_type) { ++ case SYSCFG0_DRAM_TYPE_DDR1_MT7628: ++ pr_info("Board has DDR1\n"); ++ soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; ++ soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; ++ break; ++ ++ case SYSCFG0_DRAM_TYPE_DDR2_MT7628: ++ pr_info("Board has DDR2\n"); ++ soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; ++ soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; ++ break; ++ default: ++ BUG(); ++ } ++} ++ + void prom_soc_init(struct ralink_soc_info *soc_info) + { + void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7620_SYSC_BASE); +@@ -384,18 +563,25 @@ void prom_soc_init(struct ralink_soc_info *soc_info) + rev = __raw_readl(sysc + SYSC_REG_CHIP_REV); + bga = (rev >> CHIP_REV_PKG_SHIFT) & CHIP_REV_PKG_MASK; + +- if (n0 != MT7620_CHIP_NAME0 || n1 != MT7620_CHIP_NAME1) +- panic("mt7620: unknown SoC, n0:%08x n1:%08x\n", n0, n1); +- +- if (bga) { +- name = "MT7620A"; +- soc_info->compatible = "ralink,mt7620a-soc"; +- } else { +- name = "MT7620N"; +- soc_info->compatible = "ralink,mt7620n-soc"; ++ if (n0 == MT7620_CHIP_NAME0 && n1 == MT7620_CHIP_NAME1) { ++ if (bga) { ++ mt762x_soc = MT762X_SOC_MT7620A; ++ name = "MT7620A"; ++ soc_info->compatible = "ralink,mt7620a-soc"; ++ } else { ++ mt762x_soc = MT762X_SOC_MT7620N; ++ name = "MT7620N"; ++ soc_info->compatible = "ralink,mt7620n-soc"; + #ifdef CONFIG_PCI +- panic("mt7620n is only supported for non pci kernels"); ++ panic("mt7620n is only supported for non pci kernels"); + #endif ++ } ++ } else if (n0 == MT7620_CHIP_NAME0 && n1 == MT7628_CHIP_NAME1) { ++ mt762x_soc = MT762X_SOC_MT7628AN; ++ name = "MT7628AN"; ++ soc_info->compatible = "ralink,mt7628an-soc"; ++ } else { ++ panic("mt762x: unknown SoC, n0:%08x n1:%08x\n", n0, n1); + } + + snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, +@@ -407,28 +593,11 @@ void prom_soc_init(struct ralink_soc_info *soc_info) + cfg0 = __raw_readl(sysc + SYSC_REG_SYSTEM_CONFIG0); + dram_type = (cfg0 >> SYSCFG0_DRAM_TYPE_SHIFT) & SYSCFG0_DRAM_TYPE_MASK; + +- switch (dram_type) { +- case SYSCFG0_DRAM_TYPE_SDRAM: +- pr_info("Board has SDRAM\n"); +- soc_info->mem_size_min = MT7620_SDRAM_SIZE_MIN; +- soc_info->mem_size_max = MT7620_SDRAM_SIZE_MAX; +- break; +- +- case SYSCFG0_DRAM_TYPE_DDR1: +- pr_info("Board has DDR1\n"); +- soc_info->mem_size_min = MT7620_DDR1_SIZE_MIN; +- soc_info->mem_size_max = MT7620_DDR1_SIZE_MAX; +- break; +- +- case SYSCFG0_DRAM_TYPE_DDR2: +- pr_info("Board has DDR2\n"); +- soc_info->mem_size_min = MT7620_DDR2_SIZE_MIN; +- soc_info->mem_size_max = MT7620_DDR2_SIZE_MAX; +- break; +- default: +- BUG(); +- } + soc_info->mem_base = MT7620_DRAM_BASE; ++ if (mt762x_soc == MT762X_SOC_MT7628AN) ++ mt7628_dram_init(soc_info); ++ else ++ mt7620_dram_init(soc_info); + + pmu0 = __raw_readl(sysc + PMU0_CFG); + pmu1 = __raw_readl(sysc + PMU1_CFG); +@@ -437,4 +606,9 @@ void prom_soc_init(struct ralink_soc_info *soc_info) + (pmu0 & PMU_SW_SET) ? ("sw") : ("hw")); + pr_info("Digital PMU set to %s control\n", + (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); ++ ++ if (mt762x_soc == MT762X_SOC_MT7628AN) ++ rt2880_pinmux_data = mt7628an_pinmux_data; ++ else ++ rt2880_pinmux_data = mt7620a_pinmux_data; + } +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0027-serial-ralink-adds-mt7620-serial.patch b/target/linux/ramips/patches-3.14/0027-serial-ralink-adds-mt7620-serial.patch new file mode 100644 index 0000000000..1d95f9c387 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0027-serial-ralink-adds-mt7620-serial.patch @@ -0,0 +1,28 @@ +From 0b24e0e6bf2d9a1ca5f95446bc025dafc226998c Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Fri, 15 Mar 2013 18:16:01 +0100 +Subject: [PATCH 27/57] serial: ralink: adds mt7620 serial + +Add the config symbol for Mediatek7620 SoC to SERIAL_8250_RT288X + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/tty/serial/8250/Kconfig | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig +index 2332991..7fb6873 100644 +--- a/drivers/tty/serial/8250/Kconfig ++++ b/drivers/tty/serial/8250/Kconfig +@@ -297,7 +297,7 @@ config SERIAL_8250_EM + + config SERIAL_8250_RT288X + bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support" +- depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883) ++ depends on SERIAL_8250 && (SOC_RT288X || SOC_RT305X || SOC_RT3883 || SOC_MT7620) + help + If you have a Ralink RT288x/RT305x SoC based board and want to use the + serial port, say Y to this option. The driver can handle up to 2 serial +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch b/target/linux/ramips/patches-3.14/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch new file mode 100644 index 0000000000..072380ce01 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0028-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch @@ -0,0 +1,27 @@ +From b9ba09038dab4d824176ea2c2f2b73f49b567217 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 04:52:01 +0000 +Subject: [PATCH 28/57] serial: ralink: the core has a size of 0x100 and not + 0x1000 + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/tty/serial/8250/8250_core.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c +index 69932b7..606cbc6 100644 +--- a/drivers/tty/serial/8250/8250_core.c ++++ b/drivers/tty/serial/8250/8250_core.c +@@ -2517,7 +2517,7 @@ serial8250_pm(struct uart_port *port, unsigned int state, + static unsigned int serial8250_port_size(struct uart_8250_port *pt) + { + if (pt->port.iotype == UPIO_AU) +- return 0x1000; ++ return 0x100; + if (is_omap1_8250(pt)) + return 0x16 << pt->port.regshift; + +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0029-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch b/target/linux/ramips/patches-3.14/0029-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch new file mode 100644 index 0000000000..baae397bf2 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0029-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch @@ -0,0 +1,32 @@ +From 49b47dfcef1353cd28eac8f64170e75d28ce4311 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 14 Jul 2013 23:18:57 +0200 +Subject: [PATCH 29/57] serial: of: allow au1x00 and rt288x to load from OF + +In order to make serial_8250 loadable via OF on Au1x00 and Ralink WiSoC we need +to default the iotype to UPIO_AU. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/tty/serial/of_serial.c | 5 ++++- + 1 file changed, 4 insertions(+), 1 deletion(-) + +diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c +index 9924660..42853b4 100644 +--- a/drivers/tty/serial/of_serial.c ++++ b/drivers/tty/serial/of_serial.c +@@ -102,7 +102,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev, + port->fifosize = prop; + + port->irq = irq_of_parse_and_map(np, 0); +- port->iotype = UPIO_MEM; ++ if (of_device_is_compatible(np, "ralink,rt2880-uart")) ++ port->iotype = UPIO_AU; ++ else ++ port->iotype = UPIO_MEM; + if (of_property_read_u32(np, "reg-io-width", &prop) == 0) { + switch (prop) { + case 1: +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0030-pinctrl-ralink-add-pinctrl-driver.patch b/target/linux/ramips/patches-3.14/0030-pinctrl-ralink-add-pinctrl-driver.patch new file mode 100644 index 0000000000..9e006b5821 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0030-pinctrl-ralink-add-pinctrl-driver.patch @@ -0,0 +1,1429 @@ +From 675c6ddd9432c39f508f9d6bdda17d9c675788cf Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:34:05 +0100 +Subject: [PATCH 30/57] pinctrl: ralink: add pinctrl driver + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/Kconfig | 2 + + arch/mips/include/asm/mach-ralink/mt7620.h | 41 ++- + arch/mips/include/asm/mach-ralink/pinmux.h | 53 ++++ + arch/mips/include/asm/mach-ralink/rt305x.h | 35 ++- + arch/mips/include/asm/mach-ralink/rt3883.h | 16 +- + arch/mips/ralink/common.h | 19 -- + arch/mips/ralink/mt7620.c | 159 +++------- + arch/mips/ralink/rt288x.c | 62 ++-- + arch/mips/ralink/rt305x.c | 151 ++++----- + arch/mips/ralink/rt3883.c | 173 +++-------- + drivers/pinctrl/Kconfig | 5 + + drivers/pinctrl/Makefile | 1 + + drivers/pinctrl/pinctrl-rt2880.c | 467 ++++++++++++++++++++++++++++ + 13 files changed, 764 insertions(+), 420 deletions(-) + create mode 100644 arch/mips/include/asm/mach-ralink/pinmux.h + create mode 100644 drivers/pinctrl/pinctrl-rt2880.c + +diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig +index 95fa1f1..4ac98ca 100644 +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -435,6 +435,8 @@ config RALINK + select CLKDEV_LOOKUP + select ARCH_HAS_RESET_CONTROLLER + select RESET_CONTROLLER ++ select PINCTRL ++ select PINCTRL_RT2880 + + config SGI_IP22 + bool "SGI IP22 (Indy/Indigo2)" +diff --git a/arch/mips/include/asm/mach-ralink/mt7620.h b/arch/mips/include/asm/mach-ralink/mt7620.h +index c8590df..1976fb8 100644 +--- a/arch/mips/include/asm/mach-ralink/mt7620.h ++++ b/arch/mips/include/asm/mach-ralink/mt7620.h +@@ -90,7 +90,6 @@ enum mt762x_soc_type { + #define MT7620_DDR2_SIZE_MIN 32 + #define MT7620_DDR2_SIZE_MAX 256 + +-#define MT7620_GPIO_MODE_I2C BIT(0) + #define MT7620_GPIO_MODE_UART0_SHIFT 2 + #define MT7620_GPIO_MODE_UART0_MASK 0x7 + #define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT) +@@ -102,16 +101,36 @@ enum mt762x_soc_type { + #define MT7620_GPIO_MODE_GPIO_UARTF 0x5 + #define MT7620_GPIO_MODE_GPIO_I2S 0x6 + #define MT7620_GPIO_MODE_GPIO 0x7 +-#define MT7620_GPIO_MODE_UART1 BIT(5) +-#define MT7620_GPIO_MODE_MDIO BIT(8) +-#define MT7620_GPIO_MODE_RGMII1 BIT(9) +-#define MT7620_GPIO_MODE_RGMII2 BIT(10) +-#define MT7620_GPIO_MODE_SPI BIT(11) +-#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12) +-#define MT7620_GPIO_MODE_WLED BIT(13) +-#define MT7620_GPIO_MODE_JTAG BIT(15) +-#define MT7620_GPIO_MODE_EPHY BIT(15) +-#define MT7620_GPIO_MODE_WDT BIT(22) ++ ++#define MT7620_GPIO_MODE_NAND 0 ++#define MT7620_GPIO_MODE_SD 1 ++#define MT7620_GPIO_MODE_ND_SD_GPIO 2 ++#define MT7620_GPIO_MODE_ND_SD_MASK 0x3 ++#define MT7620_GPIO_MODE_ND_SD_SHIFT 18 ++ ++#define MT7620_GPIO_MODE_PCIE_RST 0 ++#define MT7620_GPIO_MODE_PCIE_REF 1 ++#define MT7620_GPIO_MODE_PCIE_GPIO 2 ++#define MT7620_GPIO_MODE_PCIE_MASK 0x3 ++#define MT7620_GPIO_MODE_PCIE_SHIFT 16 ++ ++#define MT7620_GPIO_MODE_WDT_RST 0 ++#define MT7620_GPIO_MODE_WDT_REF 1 ++#define MT7620_GPIO_MODE_WDT_GPIO 2 ++#define MT7620_GPIO_MODE_WDT_MASK 0x3 ++#define MT7620_GPIO_MODE_WDT_SHIFT 21 ++ ++#define MT7620_GPIO_MODE_I2C 0 ++#define MT7620_GPIO_MODE_UART1 5 ++#define MT7620_GPIO_MODE_MDIO 8 ++#define MT7620_GPIO_MODE_RGMII1 9 ++#define MT7620_GPIO_MODE_RGMII2 10 ++#define MT7620_GPIO_MODE_SPI 11 ++#define MT7620_GPIO_MODE_SPI_REF_CLK 12 ++#define MT7620_GPIO_MODE_WLED 13 ++#define MT7620_GPIO_MODE_JTAG 15 ++#define MT7620_GPIO_MODE_EPHY 15 ++#define MT7620_GPIO_MODE_PA 20 + + static inline int mt7620_get_eco(void) + { +diff --git a/arch/mips/include/asm/mach-ralink/pinmux.h b/arch/mips/include/asm/mach-ralink/pinmux.h +new file mode 100644 +index 0000000..324fa40 +--- /dev/null ++++ b/arch/mips/include/asm/mach-ralink/pinmux.h +@@ -0,0 +1,53 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * publishhed by the Free Software Foundation. ++ * ++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org> ++ */ ++ ++#ifndef _RT288X_PINMUX_H__ ++#define _RT288X_PINMUX_H__ ++ ++#define FUNC(name, value, pin_first, pin_count) { name, value, pin_first, pin_count } ++#define GRP(_name, _func, _mask, _shift) \ ++ { .name = _name, .mask = _mask, .shift = _shift, \ ++ .func = _func, .gpio = _mask, \ ++ .func_count = ARRAY_SIZE(_func) } ++ ++#define GRP_G(_name, _func, _mask, _gpio, _shift) \ ++ { .name = _name, .mask = _mask, .shift = _shift, \ ++ .func = _func, .gpio = _gpio, \ ++ .func_count = ARRAY_SIZE(_func) } ++ ++struct rt2880_pmx_group; ++ ++struct rt2880_pmx_func { ++ const char *name; ++ const char value; ++ ++ int pin_first; ++ int pin_count; ++ int *pins; ++ ++ int *groups; ++ int group_count; ++ ++ int enabled; ++}; ++ ++struct rt2880_pmx_group { ++ const char *name; ++ int enabled; ++ ++ const u32 shift; ++ const char mask; ++ const char gpio; ++ ++ struct rt2880_pmx_func *func; ++ int func_count; ++}; ++ ++extern struct rt2880_pmx_group *rt2880_pinmux_data; ++ ++#endif +diff --git a/arch/mips/include/asm/mach-ralink/rt305x.h b/arch/mips/include/asm/mach-ralink/rt305x.h +index 069bf37..96f731b 100644 +--- a/arch/mips/include/asm/mach-ralink/rt305x.h ++++ b/arch/mips/include/asm/mach-ralink/rt305x.h +@@ -125,24 +125,29 @@ static inline int soc_is_rt5350(void) + #define RT305X_GPIO_GE0_TXD0 40 + #define RT305X_GPIO_GE0_RXCLK 51 + +-#define RT305X_GPIO_MODE_I2C BIT(0) +-#define RT305X_GPIO_MODE_SPI BIT(1) + #define RT305X_GPIO_MODE_UART0_SHIFT 2 + #define RT305X_GPIO_MODE_UART0_MASK 0x7 + #define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT) +-#define RT305X_GPIO_MODE_UARTF 0x0 +-#define RT305X_GPIO_MODE_PCM_UARTF 0x1 +-#define RT305X_GPIO_MODE_PCM_I2S 0x2 +-#define RT305X_GPIO_MODE_I2S_UARTF 0x3 +-#define RT305X_GPIO_MODE_PCM_GPIO 0x4 +-#define RT305X_GPIO_MODE_GPIO_UARTF 0x5 +-#define RT305X_GPIO_MODE_GPIO_I2S 0x6 +-#define RT305X_GPIO_MODE_GPIO 0x7 +-#define RT305X_GPIO_MODE_UART1 BIT(5) +-#define RT305X_GPIO_MODE_JTAG BIT(6) +-#define RT305X_GPIO_MODE_MDIO BIT(7) +-#define RT305X_GPIO_MODE_SDRAM BIT(8) +-#define RT305X_GPIO_MODE_RGMII BIT(9) ++#define RT305X_GPIO_MODE_UARTF 0 ++#define RT305X_GPIO_MODE_PCM_UARTF 1 ++#define RT305X_GPIO_MODE_PCM_I2S 2 ++#define RT305X_GPIO_MODE_I2S_UARTF 3 ++#define RT305X_GPIO_MODE_PCM_GPIO 4 ++#define RT305X_GPIO_MODE_GPIO_UARTF 5 ++#define RT305X_GPIO_MODE_GPIO_I2S 6 ++#define RT305X_GPIO_MODE_GPIO 7 ++ ++#define RT305X_GPIO_MODE_I2C 0 ++#define RT305X_GPIO_MODE_SPI 1 ++#define RT305X_GPIO_MODE_UART1 5 ++#define RT305X_GPIO_MODE_JTAG 6 ++#define RT305X_GPIO_MODE_MDIO 7 ++#define RT305X_GPIO_MODE_SDRAM 8 ++#define RT305X_GPIO_MODE_RGMII 9 ++#define RT5350_GPIO_MODE_PHY_LED 14 ++#define RT5350_GPIO_MODE_SPI_CS1 21 ++#define RT3352_GPIO_MODE_LNA 18 ++#define RT3352_GPIO_MODE_PA 20 + + #define RT3352_SYSC_REG_SYSCFG0 0x010 + #define RT3352_SYSC_REG_SYSCFG1 0x014 +diff --git a/arch/mips/include/asm/mach-ralink/rt3883.h b/arch/mips/include/asm/mach-ralink/rt3883.h +index 058382f..0fbe6f9 100644 +--- a/arch/mips/include/asm/mach-ralink/rt3883.h ++++ b/arch/mips/include/asm/mach-ralink/rt3883.h +@@ -112,8 +112,6 @@ + #define RT3883_CLKCFG1_PCI_CLK_EN BIT(19) + #define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18) + +-#define RT3883_GPIO_MODE_I2C BIT(0) +-#define RT3883_GPIO_MODE_SPI BIT(1) + #define RT3883_GPIO_MODE_UART0_SHIFT 2 + #define RT3883_GPIO_MODE_UART0_MASK 0x7 + #define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT) +@@ -125,11 +123,15 @@ + #define RT3883_GPIO_MODE_GPIO_UARTF 0x5 + #define RT3883_GPIO_MODE_GPIO_I2S 0x6 + #define RT3883_GPIO_MODE_GPIO 0x7 +-#define RT3883_GPIO_MODE_UART1 BIT(5) +-#define RT3883_GPIO_MODE_JTAG BIT(6) +-#define RT3883_GPIO_MODE_MDIO BIT(7) +-#define RT3883_GPIO_MODE_GE1 BIT(9) +-#define RT3883_GPIO_MODE_GE2 BIT(10) ++ ++#define RT3883_GPIO_MODE_I2C 0 ++#define RT3883_GPIO_MODE_SPI 1 ++#define RT3883_GPIO_MODE_UART1 5 ++#define RT3883_GPIO_MODE_JTAG 6 ++#define RT3883_GPIO_MODE_MDIO 7 ++#define RT3883_GPIO_MODE_GE1 9 ++#define RT3883_GPIO_MODE_GE2 10 ++ + #define RT3883_GPIO_MODE_PCI_SHIFT 11 + #define RT3883_GPIO_MODE_PCI_MASK 0x7 + #define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT) +diff --git a/arch/mips/ralink/common.h b/arch/mips/ralink/common.h +index 42dfd61..8e7d8e6 100644 +--- a/arch/mips/ralink/common.h ++++ b/arch/mips/ralink/common.h +@@ -11,25 +11,6 @@ + + #define RAMIPS_SYS_TYPE_LEN 32 + +-struct ralink_pinmux_grp { +- const char *name; +- u32 mask; +- int gpio_first; +- int gpio_last; +-}; +- +-struct ralink_pinmux { +- struct ralink_pinmux_grp *mode; +- struct ralink_pinmux_grp *uart; +- int uart_shift; +- u32 uart_mask; +- void (*wdt_reset)(void); +- struct ralink_pinmux_grp *pci; +- int pci_shift; +- u32 pci_mask; +-}; +-extern struct ralink_pinmux rt_gpio_pinmux; +- + struct ralink_soc_info { + unsigned char sys_type[RAMIPS_SYS_TYPE_LEN]; + unsigned char *compatible; +diff --git a/arch/mips/ralink/mt7620.c b/arch/mips/ralink/mt7620.c +index e590ccf..818a7db 100644 +--- a/arch/mips/ralink/mt7620.c ++++ b/arch/mips/ralink/mt7620.c +@@ -17,6 +17,7 @@ + #include <asm/mipsregs.h> + #include <asm/mach-ralink/ralink_regs.h> + #include <asm/mach-ralink/mt7620.h> ++#include <asm/mach-ralink/pinmux.h> + + #include "common.h" + +@@ -47,118 +48,58 @@ enum mt762x_soc_type mt762x_soc; + /* does the board have sdram or ddram */ + static int dram_type; + +-static struct ralink_pinmux_grp mode_mux[] = { +- { +- .name = "i2c", +- .mask = MT7620_GPIO_MODE_I2C, +- .gpio_first = 1, +- .gpio_last = 2, +- }, { +- .name = "spi", +- .mask = MT7620_GPIO_MODE_SPI, +- .gpio_first = 3, +- .gpio_last = 6, +- }, { +- .name = "uartlite", +- .mask = MT7620_GPIO_MODE_UART1, +- .gpio_first = 15, +- .gpio_last = 16, +- }, { +- .name = "wdt", +- .mask = MT7620_GPIO_MODE_WDT, +- .gpio_first = 17, +- .gpio_last = 17, +- }, { +- .name = "mdio", +- .mask = MT7620_GPIO_MODE_MDIO, +- .gpio_first = 22, +- .gpio_last = 23, +- }, { +- .name = "rgmii1", +- .mask = MT7620_GPIO_MODE_RGMII1, +- .gpio_first = 24, +- .gpio_last = 35, +- }, { +- .name = "spi refclk", +- .mask = MT7620_GPIO_MODE_SPI_REF_CLK, +- .gpio_first = 37, +- .gpio_last = 39, +- }, { +- .name = "jtag", +- .mask = MT7620_GPIO_MODE_JTAG, +- .gpio_first = 40, +- .gpio_last = 44, +- }, { +- /* shared lines with jtag */ +- .name = "ephy", +- .mask = MT7620_GPIO_MODE_EPHY, +- .gpio_first = 40, +- .gpio_last = 44, +- }, { +- .name = "nand", +- .mask = MT7620_GPIO_MODE_JTAG, +- .gpio_first = 45, +- .gpio_last = 59, +- }, { +- .name = "rgmii2", +- .mask = MT7620_GPIO_MODE_RGMII2, +- .gpio_first = 60, +- .gpio_last = 71, +- }, { +- .name = "wled", +- .mask = MT7620_GPIO_MODE_WLED, +- .gpio_first = 72, +- .gpio_last = 72, +- }, {0} ++static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 1, 2) }; ++static struct rt2880_pmx_func spi_grp[] = { FUNC("spi", 0, 3, 4) }; ++static struct rt2880_pmx_func uartlite_grp[] = { FUNC("uartlite", 0, 15, 2) }; ++static struct rt2880_pmx_func mdio_grp[] = { FUNC("mdio", 0, 22, 2) }; ++static struct rt2880_pmx_func rgmii1_grp[] = { FUNC("rgmii1", 0, 24, 12) }; ++static struct rt2880_pmx_func refclk_grp[] = { FUNC("spi refclk", 0, 37, 3) }; ++static struct rt2880_pmx_func ephy_grp[] = { FUNC("ephy", 0, 40, 5) }; ++static struct rt2880_pmx_func rgmii2_grp[] = { FUNC("rgmii2", 0, 60, 12) }; ++static struct rt2880_pmx_func wled_grp[] = { FUNC("wled", 0, 72, 1) }; ++static struct rt2880_pmx_func pa_grp[] = { FUNC("pa", 0, 18, 4) }; ++static struct rt2880_pmx_func uartf_grp[] = { ++ FUNC("uartf", MT7620_GPIO_MODE_UARTF, 7, 8), ++ FUNC("pcm uartf", MT7620_GPIO_MODE_PCM_UARTF, 7, 8), ++ FUNC("pcm i2s", MT7620_GPIO_MODE_PCM_I2S, 7, 8), ++ FUNC("i2s uartf", MT7620_GPIO_MODE_I2S_UARTF, 7, 8), ++ FUNC("pcm gpio", MT7620_GPIO_MODE_PCM_GPIO, 11, 4), ++ FUNC("gpio uartf", MT7620_GPIO_MODE_GPIO_UARTF, 7, 4), ++ FUNC("gpio i2s", MT7620_GPIO_MODE_GPIO_I2S, 7, 4), + }; +- +-static struct ralink_pinmux_grp uart_mux[] = { +- { +- .name = "uartf", +- .mask = MT7620_GPIO_MODE_UARTF, +- .gpio_first = 7, +- .gpio_last = 14, +- }, { +- .name = "pcm uartf", +- .mask = MT7620_GPIO_MODE_PCM_UARTF, +- .gpio_first = 7, +- .gpio_last = 14, +- }, { +- .name = "pcm i2s", +- .mask = MT7620_GPIO_MODE_PCM_I2S, +- .gpio_first = 7, +- .gpio_last = 14, +- }, { +- .name = "i2s uartf", +- .mask = MT7620_GPIO_MODE_I2S_UARTF, +- .gpio_first = 7, +- .gpio_last = 14, +- }, { +- .name = "pcm gpio", +- .mask = MT7620_GPIO_MODE_PCM_GPIO, +- .gpio_first = 11, +- .gpio_last = 14, +- }, { +- .name = "gpio uartf", +- .mask = MT7620_GPIO_MODE_GPIO_UARTF, +- .gpio_first = 7, +- .gpio_last = 10, +- }, { +- .name = "gpio i2s", +- .mask = MT7620_GPIO_MODE_GPIO_I2S, +- .gpio_first = 7, +- .gpio_last = 10, +- }, { +- .name = "gpio", +- .mask = MT7620_GPIO_MODE_GPIO, +- }, {0} ++static struct rt2880_pmx_func wdt_grp[] = { ++ FUNC("wdt rst", 0, 17, 1), ++ FUNC("wdt refclk", 0, 17, 1), ++ }; ++static struct rt2880_pmx_func pcie_rst_grp[] = { ++ FUNC("pcie rst", MT7620_GPIO_MODE_PCIE_RST, 36, 1), ++ FUNC("pcie refclk", MT7620_GPIO_MODE_PCIE_REF, 36, 1) ++}; ++static struct rt2880_pmx_func nd_sd_grp[] = { ++ FUNC("nand", MT7620_GPIO_MODE_NAND, 45, 15), ++ FUNC("sd", MT7620_GPIO_MODE_SD, 45, 15) + }; + +-struct ralink_pinmux rt_gpio_pinmux = { +- .mode = mode_mux, +- .uart = uart_mux, +- .uart_shift = MT7620_GPIO_MODE_UART0_SHIFT, +- .uart_mask = MT7620_GPIO_MODE_UART0_MASK, ++static struct rt2880_pmx_group mt7620a_pinmux_data[] = { ++ GRP("i2c", i2c_grp, 1, MT7620_GPIO_MODE_I2C), ++ GRP("uartf", uartf_grp, MT7620_GPIO_MODE_UART0_MASK, ++ MT7620_GPIO_MODE_UART0_SHIFT), ++ GRP("spi", spi_grp, 1, MT7620_GPIO_MODE_SPI), ++ GRP("uartlite", uartlite_grp, 1, MT7620_GPIO_MODE_UART1), ++ GRP_G("wdt", wdt_grp, MT7620_GPIO_MODE_WDT_MASK, ++ MT7620_GPIO_MODE_WDT_GPIO, MT7620_GPIO_MODE_WDT_SHIFT), ++ GRP("mdio", mdio_grp, 1, MT7620_GPIO_MODE_MDIO), ++ GRP("rgmii1", rgmii1_grp, 1, MT7620_GPIO_MODE_RGMII1), ++ GRP("spi refclk", refclk_grp, 1, MT7620_GPIO_MODE_SPI_REF_CLK), ++ GRP_G("pcie", pcie_rst_grp, MT7620_GPIO_MODE_PCIE_MASK, ++ MT7620_GPIO_MODE_PCIE_GPIO, MT7620_GPIO_MODE_PCIE_SHIFT), ++ GRP_G("nd_sd", nd_sd_grp, MT7620_GPIO_MODE_ND_SD_MASK, ++ MT7620_GPIO_MODE_ND_SD_GPIO, MT7620_GPIO_MODE_ND_SD_SHIFT), ++ GRP("rgmii2", rgmii2_grp, 1, MT7620_GPIO_MODE_RGMII2), ++ GRP("wled", wled_grp, 1, MT7620_GPIO_MODE_WLED), ++ GRP("ephy", ephy_grp, 1, MT7620_GPIO_MODE_EPHY), ++ GRP("pa", pa_grp, 1, MT7620_GPIO_MODE_PA), ++ { 0 } + }; + + static struct rt2880_pmx_func pwm1_grp_mt7628[] = { +diff --git a/arch/mips/ralink/rt288x.c b/arch/mips/ralink/rt288x.c +index 90e8934..2bfc660 100644 +--- a/arch/mips/ralink/rt288x.c ++++ b/arch/mips/ralink/rt288x.c +@@ -17,46 +17,27 @@ + #include <asm/mipsregs.h> + #include <asm/mach-ralink/ralink_regs.h> + #include <asm/mach-ralink/rt288x.h> ++#include <asm/mach-ralink/pinmux.h> + + #include "common.h" + +-static struct ralink_pinmux_grp mode_mux[] = { +- { +- .name = "i2c", +- .mask = RT2880_GPIO_MODE_I2C, +- .gpio_first = 1, +- .gpio_last = 2, +- }, { +- .name = "spi", +- .mask = RT2880_GPIO_MODE_SPI, +- .gpio_first = 3, +- .gpio_last = 6, +- }, { +- .name = "uartlite", +- .mask = RT2880_GPIO_MODE_UART0, +- .gpio_first = 7, +- .gpio_last = 14, +- }, { +- .name = "jtag", +- .mask = RT2880_GPIO_MODE_JTAG, +- .gpio_first = 17, +- .gpio_last = 21, +- }, { +- .name = "mdio", +- .mask = RT2880_GPIO_MODE_MDIO, +- .gpio_first = 22, +- .gpio_last = 23, +- }, { +- .name = "sdram", +- .mask = RT2880_GPIO_MODE_SDRAM, +- .gpio_first = 24, +- .gpio_last = 39, +- }, { +- .name = "pci", +- .mask = RT2880_GPIO_MODE_PCI, +- .gpio_first = 40, +- .gpio_last = 71, +- }, {0} ++static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) }; ++static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) }; ++static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) }; ++static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) }; ++static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) }; ++static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) }; ++static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) }; ++ ++static struct rt2880_pmx_group rt2880_pinmux_data_act[] = { ++ GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C), ++ GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI), ++ GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0), ++ GRP("jtag", jtag_func, 1, RT2880_GPIO_MODE_JTAG), ++ GRP("mdio", mdio_func, 1, RT2880_GPIO_MODE_MDIO), ++ GRP("sdram", sdram_func, 1, RT2880_GPIO_MODE_SDRAM), ++ GRP("pci", pci_func, 1, RT2880_GPIO_MODE_PCI), ++ { 0 } + }; + + static void rt288x_wdt_reset(void) +@@ -69,11 +50,6 @@ static void rt288x_wdt_reset(void) + rt_sysc_w32(t, SYSC_REG_CLKCFG); + } + +-struct ralink_pinmux rt_gpio_pinmux = { +- .mode = mode_mux, +- .wdt_reset = rt288x_wdt_reset, +-}; +- + void __init ralink_clk_init(void) + { + unsigned long cpu_rate, wmac_rate = 40000000; +@@ -141,4 +117,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info) + soc_info->mem_base = RT2880_SDRAM_BASE; + soc_info->mem_size_min = RT2880_MEM_SIZE_MIN; + soc_info->mem_size_max = RT2880_MEM_SIZE_MAX; ++ ++ rt2880_pinmux_data = rt2880_pinmux_data_act; + } +diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c +index bb82a82..356d6a0 100644 +--- a/arch/mips/ralink/rt305x.c ++++ b/arch/mips/ralink/rt305x.c +@@ -17,90 +17,76 @@ + #include <asm/mipsregs.h> + #include <asm/mach-ralink/ralink_regs.h> + #include <asm/mach-ralink/rt305x.h> ++#include <asm/mach-ralink/pinmux.h> + + #include "common.h" + + enum rt305x_soc_type rt305x_soc; + +-static struct ralink_pinmux_grp mode_mux[] = { +- { +- .name = "i2c", +- .mask = RT305X_GPIO_MODE_I2C, +- .gpio_first = RT305X_GPIO_I2C_SD, +- .gpio_last = RT305X_GPIO_I2C_SCLK, +- }, { +- .name = "spi", +- .mask = RT305X_GPIO_MODE_SPI, +- .gpio_first = RT305X_GPIO_SPI_EN, +- .gpio_last = RT305X_GPIO_SPI_CLK, +- }, { +- .name = "uartlite", +- .mask = RT305X_GPIO_MODE_UART1, +- .gpio_first = RT305X_GPIO_UART1_TXD, +- .gpio_last = RT305X_GPIO_UART1_RXD, +- }, { +- .name = "jtag", +- .mask = RT305X_GPIO_MODE_JTAG, +- .gpio_first = RT305X_GPIO_JTAG_TDO, +- .gpio_last = RT305X_GPIO_JTAG_TDI, +- }, { +- .name = "mdio", +- .mask = RT305X_GPIO_MODE_MDIO, +- .gpio_first = RT305X_GPIO_MDIO_MDC, +- .gpio_last = RT305X_GPIO_MDIO_MDIO, +- }, { +- .name = "sdram", +- .mask = RT305X_GPIO_MODE_SDRAM, +- .gpio_first = RT305X_GPIO_SDRAM_MD16, +- .gpio_last = RT305X_GPIO_SDRAM_MD31, +- }, { +- .name = "rgmii", +- .mask = RT305X_GPIO_MODE_RGMII, +- .gpio_first = RT305X_GPIO_GE0_TXD0, +- .gpio_last = RT305X_GPIO_GE0_RXCLK, +- }, {0} ++static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) }; ++static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) }; ++static struct rt2880_pmx_func uartf_func[] = { ++ FUNC("uartf", RT305X_GPIO_MODE_UARTF, 7, 8), ++ FUNC("pcm uartf", RT305X_GPIO_MODE_PCM_UARTF, 7, 8), ++ FUNC("pcm i2s", RT305X_GPIO_MODE_PCM_I2S, 7, 8), ++ FUNC("i2s uartf", RT305X_GPIO_MODE_I2S_UARTF, 7, 8), ++ FUNC("pcm gpio", RT305X_GPIO_MODE_PCM_GPIO, 11, 4), ++ FUNC("gpio uartf", RT305X_GPIO_MODE_GPIO_UARTF, 7, 4), ++ FUNC("gpio i2s", RT305X_GPIO_MODE_GPIO_I2S, 7, 4), ++}; ++static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) }; ++static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) }; ++static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) }; ++static struct rt2880_pmx_func rt5350_led_func[] = { FUNC("led", 0, 22, 5) }; ++static struct rt2880_pmx_func rt5350_cs1_func[] = { ++ FUNC("spi_cs1", 0, 27, 1), ++ FUNC("wdg_cs1", 1, 27, 1), ++}; ++static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) }; ++static struct rt2880_pmx_func rt3352_rgmii_func[] = { FUNC("rgmii", 0, 24, 12) }; ++static struct rt2880_pmx_func rgmii_func[] = { FUNC("rgmii", 0, 40, 12) }; ++static struct rt2880_pmx_func rt3352_lna_func[] = { FUNC("lna", 0, 36, 2) }; ++static struct rt2880_pmx_func rt3352_pa_func[] = { FUNC("pa", 0, 38, 2) }; ++static struct rt2880_pmx_func rt3352_led_func[] = { FUNC("led", 0, 40, 5) }; ++ ++static struct rt2880_pmx_group rt3050_pinmux_data[] = { ++ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C), ++ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI), ++ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK, ++ RT305X_GPIO_MODE_UART0_SHIFT), ++ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1), ++ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG), ++ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO), ++ GRP("rgmii", rgmii_func, 1, RT305X_GPIO_MODE_RGMII), ++ GRP("sdram", sdram_func, 1, RT305X_GPIO_MODE_SDRAM), ++ { 0 } + }; + +-static struct ralink_pinmux_grp uart_mux[] = { +- { +- .name = "uartf", +- .mask = RT305X_GPIO_MODE_UARTF, +- .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_14, +- }, { +- .name = "pcm uartf", +- .mask = RT305X_GPIO_MODE_PCM_UARTF, +- .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_14, +- }, { +- .name = "pcm i2s", +- .mask = RT305X_GPIO_MODE_PCM_I2S, +- .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_14, +- }, { +- .name = "i2s uartf", +- .mask = RT305X_GPIO_MODE_I2S_UARTF, +- .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_14, +- }, { +- .name = "pcm gpio", +- .mask = RT305X_GPIO_MODE_PCM_GPIO, +- .gpio_first = RT305X_GPIO_10, +- .gpio_last = RT305X_GPIO_14, +- }, { +- .name = "gpio uartf", +- .mask = RT305X_GPIO_MODE_GPIO_UARTF, +- .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_10, +- }, { +- .name = "gpio i2s", +- .mask = RT305X_GPIO_MODE_GPIO_I2S, +- .gpio_first = RT305X_GPIO_7, +- .gpio_last = RT305X_GPIO_10, +- }, { +- .name = "gpio", +- .mask = RT305X_GPIO_MODE_GPIO, +- }, {0} ++static struct rt2880_pmx_group rt3352_pinmux_data[] = { ++ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C), ++ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI), ++ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK, ++ RT305X_GPIO_MODE_UART0_SHIFT), ++ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1), ++ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG), ++ GRP("mdio", mdio_func, 1, RT305X_GPIO_MODE_MDIO), ++ GRP("rgmii", rt3352_rgmii_func, 1, RT305X_GPIO_MODE_RGMII), ++ GRP("lna", rt3352_lna_func, 1, RT3352_GPIO_MODE_LNA), ++ GRP("pa", rt3352_pa_func, 1, RT3352_GPIO_MODE_PA), ++ GRP("led", rt3352_led_func, 1, RT5350_GPIO_MODE_PHY_LED), ++ { 0 } ++}; ++ ++static struct rt2880_pmx_group rt5350_pinmux_data[] = { ++ GRP("i2c", i2c_func, 1, RT305X_GPIO_MODE_I2C), ++ GRP("spi", spi_func, 1, RT305X_GPIO_MODE_SPI), ++ GRP("uartf", uartf_func, RT305X_GPIO_MODE_UART0_MASK, ++ RT305X_GPIO_MODE_UART0_SHIFT), ++ GRP("uartlite", uartlite_func, 1, RT305X_GPIO_MODE_UART1), ++ GRP("jtag", jtag_func, 1, RT305X_GPIO_MODE_JTAG), ++ GRP("led", rt5350_led_func, 1, RT5350_GPIO_MODE_PHY_LED), ++ GRP("spi_cs1", rt5350_cs1_func, 2, RT5350_GPIO_MODE_SPI_CS1), ++ { 0 } + }; + + static void rt305x_wdt_reset(void) +@@ -114,14 +100,6 @@ static void rt305x_wdt_reset(void) + rt_sysc_w32(t, SYSC_REG_SYSTEM_CONFIG); + } + +-struct ralink_pinmux rt_gpio_pinmux = { +- .mode = mode_mux, +- .uart = uart_mux, +- .uart_shift = RT305X_GPIO_MODE_UART0_SHIFT, +- .uart_mask = RT305X_GPIO_MODE_UART0_MASK, +- .wdt_reset = rt305x_wdt_reset, +-}; +- + static unsigned long rt5350_get_mem_size(void) + { + void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); +@@ -290,11 +268,14 @@ void prom_soc_init(struct ralink_soc_info *soc_info) + soc_info->mem_base = RT305X_SDRAM_BASE; + if (soc_is_rt5350()) { + soc_info->mem_size = rt5350_get_mem_size(); ++ rt2880_pinmux_data = rt5350_pinmux_data; + } else if (soc_is_rt305x() || soc_is_rt3350()) { + soc_info->mem_size_min = RT305X_MEM_SIZE_MIN; + soc_info->mem_size_max = RT305X_MEM_SIZE_MAX; ++ rt2880_pinmux_data = rt3050_pinmux_data; + } else if (soc_is_rt3352()) { + soc_info->mem_size_min = RT3352_MEM_SIZE_MIN; + soc_info->mem_size_max = RT3352_MEM_SIZE_MAX; ++ rt2880_pinmux_data = rt3352_pinmux_data; + } + } +diff --git a/arch/mips/ralink/rt3883.c b/arch/mips/ralink/rt3883.c +index 58b5b9f..86a535c 100644 +--- a/arch/mips/ralink/rt3883.c ++++ b/arch/mips/ralink/rt3883.c +@@ -17,132 +17,50 @@ + #include <asm/mipsregs.h> + #include <asm/mach-ralink/ralink_regs.h> + #include <asm/mach-ralink/rt3883.h> ++#include <asm/mach-ralink/pinmux.h> + + #include "common.h" + +-static struct ralink_pinmux_grp mode_mux[] = { +- { +- .name = "i2c", +- .mask = RT3883_GPIO_MODE_I2C, +- .gpio_first = RT3883_GPIO_I2C_SD, +- .gpio_last = RT3883_GPIO_I2C_SCLK, +- }, { +- .name = "spi", +- .mask = RT3883_GPIO_MODE_SPI, +- .gpio_first = RT3883_GPIO_SPI_CS0, +- .gpio_last = RT3883_GPIO_SPI_MISO, +- }, { +- .name = "uartlite", +- .mask = RT3883_GPIO_MODE_UART1, +- .gpio_first = RT3883_GPIO_UART1_TXD, +- .gpio_last = RT3883_GPIO_UART1_RXD, +- }, { +- .name = "jtag", +- .mask = RT3883_GPIO_MODE_JTAG, +- .gpio_first = RT3883_GPIO_JTAG_TDO, +- .gpio_last = RT3883_GPIO_JTAG_TCLK, +- }, { +- .name = "mdio", +- .mask = RT3883_GPIO_MODE_MDIO, +- .gpio_first = RT3883_GPIO_MDIO_MDC, +- .gpio_last = RT3883_GPIO_MDIO_MDIO, +- }, { +- .name = "ge1", +- .mask = RT3883_GPIO_MODE_GE1, +- .gpio_first = RT3883_GPIO_GE1_TXD0, +- .gpio_last = RT3883_GPIO_GE1_RXCLK, +- }, { +- .name = "ge2", +- .mask = RT3883_GPIO_MODE_GE2, +- .gpio_first = RT3883_GPIO_GE2_TXD0, +- .gpio_last = RT3883_GPIO_GE2_RXCLK, +- }, { +- .name = "pci", +- .mask = RT3883_GPIO_MODE_PCI, +- .gpio_first = RT3883_GPIO_PCI_AD0, +- .gpio_last = RT3883_GPIO_PCI_AD31, +- }, { +- .name = "lna a", +- .mask = RT3883_GPIO_MODE_LNA_A, +- .gpio_first = RT3883_GPIO_LNA_PE_A0, +- .gpio_last = RT3883_GPIO_LNA_PE_A2, +- }, { +- .name = "lna g", +- .mask = RT3883_GPIO_MODE_LNA_G, +- .gpio_first = RT3883_GPIO_LNA_PE_G0, +- .gpio_last = RT3883_GPIO_LNA_PE_G2, +- }, {0} ++static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) }; ++static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) }; ++static struct rt2880_pmx_func uartf_func[] = { ++ FUNC("uartf", RT3883_GPIO_MODE_UARTF, 7, 8), ++ FUNC("pcm uartf", RT3883_GPIO_MODE_PCM_UARTF, 7, 8), ++ FUNC("pcm i2s", RT3883_GPIO_MODE_PCM_I2S, 7, 8), ++ FUNC("i2s uartf", RT3883_GPIO_MODE_I2S_UARTF, 7, 8), ++ FUNC("pcm gpio", RT3883_GPIO_MODE_PCM_GPIO, 11, 4), ++ FUNC("gpio uartf", RT3883_GPIO_MODE_GPIO_UARTF, 7, 4), ++ FUNC("gpio i2s", RT3883_GPIO_MODE_GPIO_I2S, 7, 4), + }; +- +-static struct ralink_pinmux_grp uart_mux[] = { +- { +- .name = "uartf", +- .mask = RT3883_GPIO_MODE_UARTF, +- .gpio_first = RT3883_GPIO_7, +- .gpio_last = RT3883_GPIO_14, +- }, { +- .name = "pcm uartf", +- .mask = RT3883_GPIO_MODE_PCM_UARTF, +- .gpio_first = RT3883_GPIO_7, +- .gpio_last = RT3883_GPIO_14, +- }, { +- .name = "pcm i2s", +- .mask = RT3883_GPIO_MODE_PCM_I2S, +- .gpio_first = RT3883_GPIO_7, +- .gpio_last = RT3883_GPIO_14, +- }, { +- .name = "i2s uartf", +- .mask = RT3883_GPIO_MODE_I2S_UARTF, +- .gpio_first = RT3883_GPIO_7, +- .gpio_last = RT3883_GPIO_14, +- }, { +- .name = "pcm gpio", +- .mask = RT3883_GPIO_MODE_PCM_GPIO, +- .gpio_first = RT3883_GPIO_11, +- .gpio_last = RT3883_GPIO_14, +- }, { +- .name = "gpio uartf", +- .mask = RT3883_GPIO_MODE_GPIO_UARTF, +- .gpio_first = RT3883_GPIO_7, +- .gpio_last = RT3883_GPIO_10, +- }, { +- .name = "gpio i2s", +- .mask = RT3883_GPIO_MODE_GPIO_I2S, +- .gpio_first = RT3883_GPIO_7, +- .gpio_last = RT3883_GPIO_10, +- }, { +- .name = "gpio", +- .mask = RT3883_GPIO_MODE_GPIO, +- }, {0} ++static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 15, 2) }; ++static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) }; ++static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) }; ++static struct rt2880_pmx_func lna_a_func[] = { FUNC("lna a", 0, 32, 3) }; ++static struct rt2880_pmx_func lna_g_func[] = { FUNC("lna a", 0, 35, 3) }; ++static struct rt2880_pmx_func pci_func[] = { ++ FUNC("pci-dev", 0, 40, 32), ++ FUNC("pci-host2", 1, 40, 32), ++ FUNC("pci-host1", 2, 40, 32), ++ FUNC("pci-fnc", 3, 40, 32) + }; +- +-static struct ralink_pinmux_grp pci_mux[] = { +- { +- .name = "pci-dev", +- .mask = 0, +- .gpio_first = RT3883_GPIO_PCI_AD0, +- .gpio_last = RT3883_GPIO_PCI_AD31, +- }, { +- .name = "pci-host2", +- .mask = 1, +- .gpio_first = RT3883_GPIO_PCI_AD0, +- .gpio_last = RT3883_GPIO_PCI_AD31, +- }, { +- .name = "pci-host1", +- .mask = 2, +- .gpio_first = RT3883_GPIO_PCI_AD0, +- .gpio_last = RT3883_GPIO_PCI_AD31, +- }, { +- .name = "pci-fnc", +- .mask = 3, +- .gpio_first = RT3883_GPIO_PCI_AD0, +- .gpio_last = RT3883_GPIO_PCI_AD31, +- }, { +- .name = "pci-gpio", +- .mask = 7, +- .gpio_first = RT3883_GPIO_PCI_AD0, +- .gpio_last = RT3883_GPIO_PCI_AD31, +- }, {0} ++static struct rt2880_pmx_func ge1_func[] = { FUNC("ge1", 0, 72, 12) }; ++static struct rt2880_pmx_func ge2_func[] = { FUNC("ge1", 0, 84, 12) }; ++ ++static struct rt2880_pmx_group rt3883_pinmux_data[] = { ++ GRP("i2c", i2c_func, 1, RT3883_GPIO_MODE_I2C), ++ GRP("spi", spi_func, 1, RT3883_GPIO_MODE_SPI), ++ GRP("uartf", uartf_func, RT3883_GPIO_MODE_UART0_MASK, ++ RT3883_GPIO_MODE_UART0_SHIFT), ++ GRP("uartlite", uartlite_func, 1, RT3883_GPIO_MODE_UART1), ++ GRP("jtag", jtag_func, 1, RT3883_GPIO_MODE_JTAG), ++ GRP("mdio", mdio_func, 1, RT3883_GPIO_MODE_MDIO), ++ GRP("lna a", lna_a_func, 1, RT3883_GPIO_MODE_LNA_A), ++ GRP("lna g", lna_g_func, 1, RT3883_GPIO_MODE_LNA_G), ++ GRP("pci", pci_func, RT3883_GPIO_MODE_PCI_MASK, ++ RT3883_GPIO_MODE_PCI_SHIFT), ++ GRP("ge1", ge1_func, 1, RT3883_GPIO_MODE_GE1), ++ GRP("ge2", ge2_func, 1, RT3883_GPIO_MODE_GE2), ++ { 0 } + }; + + static void rt3883_wdt_reset(void) +@@ -155,17 +73,6 @@ static void rt3883_wdt_reset(void) + rt_sysc_w32(t, RT3883_SYSC_REG_SYSCFG1); + } + +-struct ralink_pinmux rt_gpio_pinmux = { +- .mode = mode_mux, +- .uart = uart_mux, +- .uart_shift = RT3883_GPIO_MODE_UART0_SHIFT, +- .uart_mask = RT3883_GPIO_MODE_UART0_MASK, +- .wdt_reset = rt3883_wdt_reset, +- .pci = pci_mux, +- .pci_shift = RT3883_GPIO_MODE_PCI_SHIFT, +- .pci_mask = RT3883_GPIO_MODE_PCI_MASK, +-}; +- + void __init ralink_clk_init(void) + { + unsigned long cpu_rate, sys_rate; +@@ -244,4 +151,6 @@ void prom_soc_init(struct ralink_soc_info *soc_info) + soc_info->mem_base = RT3883_SDRAM_BASE; + soc_info->mem_size_min = RT3883_MEM_SIZE_MIN; + soc_info->mem_size_max = RT3883_MEM_SIZE_MAX; ++ ++ rt2880_pinmux_data = rt3883_pinmux_data; + } +diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig +index 1e4e693..1ff1491 100644 +--- a/drivers/pinctrl/Kconfig ++++ b/drivers/pinctrl/Kconfig +@@ -198,6 +198,11 @@ config PINCTRL_LANTIQ + select PINMUX + select PINCONF + ++config PINCTRL_RT2880 ++ bool ++ depends on RALINK ++ select PINMUX ++ + config PINCTRL_FALCON + bool + depends on SOC_FALCON +diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile +index 4b83588..3160836 100644 +--- a/drivers/pinctrl/Makefile ++++ b/drivers/pinctrl/Makefile +@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_DB8500) += pinctrl-nomadik-db8500.o + obj-$(CONFIG_PINCTRL_DB8540) += pinctrl-nomadik-db8540.o + obj-$(CONFIG_PINCTRL_PALMAS) += pinctrl-palmas.o + obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o ++obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o + obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o + obj-$(CONFIG_PINCTRL_SIRF) += sirf/ + obj-$(CONFIG_PINCTRL_SUNXI) += pinctrl-sunxi.o +diff --git a/drivers/pinctrl/pinctrl-rt2880.c b/drivers/pinctrl/pinctrl-rt2880.c +new file mode 100644 +index 0000000..378ed52 +--- /dev/null ++++ b/drivers/pinctrl/pinctrl-rt2880.c +@@ -0,0 +1,467 @@ ++/* ++ * linux/drivers/pinctrl/pinctrl-rt2880.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * publishhed by the Free Software Foundation. ++ * ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/module.h> ++#include <linux/device.h> ++#include <linux/io.h> ++#include <linux/platform_device.h> ++#include <linux/slab.h> ++#include <linux/of.h> ++#include <linux/pinctrl/pinctrl.h> ++#include <linux/pinctrl/pinconf.h> ++#include <linux/pinctrl/pinmux.h> ++#include <linux/pinctrl/consumer.h> ++#include <linux/pinctrl/machine.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++#include <asm/mach-ralink/pinmux.h> ++#include <asm/mach-ralink/mt7620.h> ++ ++#include "core.h" ++ ++#define SYSC_REG_GPIO_MODE 0x60 ++ ++struct rt2880_priv { ++ struct device *dev; ++ ++ struct pinctrl_pin_desc *pads; ++ struct pinctrl_desc *desc; ++ ++ struct rt2880_pmx_func **func; ++ int func_count; ++ ++ struct rt2880_pmx_group *groups; ++ const char **group_names; ++ int group_count; ++ ++ uint8_t *gpio; ++ int max_pins; ++}; ++ ++struct rt2880_pmx_group *rt2880_pinmux_data = NULL; ++ ++static int rt2880_get_group_count(struct pinctrl_dev *pctrldev) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ return p->group_count; ++} ++ ++static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev, ++ unsigned group) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ if (group >= p->group_count) ++ return NULL; ++ ++ return p->group_names[group]; ++} ++ ++static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev, ++ unsigned group, ++ const unsigned **pins, ++ unsigned *num_pins) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ if (group >= p->group_count) ++ return -EINVAL; ++ ++ *pins = p->groups[group].func[0].pins; ++ *num_pins = p->groups[group].func[0].pin_count; ++ ++ return 0; ++} ++ ++static void rt2880_pinctrl_dt_free_map(struct pinctrl_dev *pctrldev, ++ struct pinctrl_map *map, unsigned num_maps) ++{ ++ int i; ++ ++ for (i = 0; i < num_maps; i++) ++ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN || ++ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) ++ kfree(map[i].data.configs.configs); ++ kfree(map); ++} ++ ++static void rt2880_pinctrl_pin_dbg_show(struct pinctrl_dev *pctrldev, ++ struct seq_file *s, ++ unsigned offset) ++{ ++ seq_printf(s, "ralink pio"); ++} ++ ++static void rt2880_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctrldev, ++ struct device_node *np, ++ struct pinctrl_map **map) ++{ ++ const char *function; ++ int func = of_property_read_string(np, "ralink,function", &function); ++ int grps = of_property_count_strings(np, "ralink,group"); ++ int i; ++ ++ if (func || !grps) ++ return; ++ ++ for (i = 0; i < grps; i++) { ++ const char *group; ++ ++ of_property_read_string_index(np, "ralink,group", i, &group); ++ ++ (*map)->type = PIN_MAP_TYPE_MUX_GROUP; ++ (*map)->name = function; ++ (*map)->data.mux.group = group; ++ (*map)->data.mux.function = function; ++ (*map)++; ++ } ++} ++ ++static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev, ++ struct device_node *np_config, ++ struct pinctrl_map **map, ++ unsigned *num_maps) ++{ ++ int max_maps = 0; ++ struct pinctrl_map *tmp; ++ struct device_node *np; ++ ++ for_each_child_of_node(np_config, np) { ++ int ret = of_property_count_strings(np, "ralink,group"); ++ ++ if (ret >= 0) ++ max_maps += ret; ++ } ++ ++ if (!max_maps) ++ return max_maps; ++ ++ *map = kzalloc(max_maps * sizeof(struct pinctrl_map), GFP_KERNEL); ++ if (!*map) ++ return -ENOMEM; ++ ++ tmp = *map; ++ ++ for_each_child_of_node(np_config, np) ++ rt2880_pinctrl_dt_subnode_to_map(pctrldev, np, &tmp); ++ *num_maps = max_maps; ++ ++ return 0; ++} ++ ++static const struct pinctrl_ops rt2880_pctrl_ops = { ++ .get_groups_count = rt2880_get_group_count, ++ .get_group_name = rt2880_get_group_name, ++ .get_group_pins = rt2880_get_group_pins, ++ .pin_dbg_show = rt2880_pinctrl_pin_dbg_show, ++ .dt_node_to_map = rt2880_pinctrl_dt_node_to_map, ++ .dt_free_map = rt2880_pinctrl_dt_free_map, ++}; ++ ++static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ return p->func_count; ++} ++ ++static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev, ++ unsigned func) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ return p->func[func]->name; ++} ++ ++static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev, ++ unsigned func, ++ const char * const **groups, ++ unsigned * const num_groups) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ if (p->func[func]->group_count == 1) ++ *groups = &p->group_names[p->func[func]->groups[0]]; ++ else ++ *groups = p->group_names; ++ ++ *num_groups = p->func[func]->group_count; ++ ++ return 0; ++} ++ ++static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev, ++ unsigned func, ++ unsigned group) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ u32 mode = 0; ++ int i; ++ ++ /* dont allow double use */ ++ if (p->groups[group].enabled) { ++ dev_err(p->dev, "%s is already enabled\n", p->groups[group].name); ++ return -EBUSY; ++ } ++ ++ p->groups[group].enabled = 1; ++ p->func[func]->enabled = 1; ++ ++ mode = rt_sysc_r32(SYSC_REG_GPIO_MODE); ++ mode &= ~(p->groups[group].mask << p->groups[group].shift); ++ ++ /* mark the pins as gpio */ ++ for (i = 0; i < p->groups[group].func[0].pin_count; i++) ++ p->gpio[p->groups[group].func[0].pins[i]] = 1; ++ ++ /* function 0 is gpio and needs special handling */ ++ if (func == 0) { ++ mode |= p->groups[group].gpio << p->groups[group].shift; ++ } else { ++ for (i = 0; i < p->func[func]->pin_count; i++) ++ p->gpio[p->func[func]->pins[i]] = 0; ++ mode |= p->func[func]->value << p->groups[group].shift; ++ } ++ rt_sysc_w32(mode, SYSC_REG_GPIO_MODE); ++ ++ ++ return 0; ++} ++ ++static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev, ++ struct pinctrl_gpio_range *range, ++ unsigned pin) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ if (!p->gpio[pin]) { ++ dev_err(p->dev, "pin %d is not set to gpio mux\n", pin); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static const struct pinmux_ops rt2880_pmx_group_ops = { ++ .get_functions_count = rt2880_pmx_func_count, ++ .get_function_name = rt2880_pmx_func_name, ++ .get_function_groups = rt2880_pmx_group_get_groups, ++ .enable = rt2880_pmx_group_enable, ++ .gpio_request_enable = rt2880_pmx_group_gpio_request_enable, ++}; ++ ++static struct pinctrl_desc rt2880_pctrl_desc = { ++ .owner = THIS_MODULE, ++ .name = "rt2880-pinmux", ++ .pctlops = &rt2880_pctrl_ops, ++ .pmxops = &rt2880_pmx_group_ops, ++}; ++ ++static struct rt2880_pmx_func gpio_func = { ++ .name = "gpio", ++}; ++ ++static int rt2880_pinmux_index(struct rt2880_priv *p) ++{ ++ struct rt2880_pmx_func **f; ++ struct rt2880_pmx_group *mux = p->groups; ++ int i, j, c = 0; ++ ++ /* count the mux functions */ ++ while (mux->name) { ++ p->group_count++; ++ mux++; ++ } ++ ++ /* allocate the group names array needed by the gpio function */ ++ p->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL); ++ if (!p->group_names) ++ return -1; ++ ++ for (i = 0; i < p->group_count; i++) { ++ p->group_names[i] = p->groups[i].name; ++ p->func_count += p->groups[i].func_count; ++ } ++ ++ /* we have a dummy function[0] for gpio */ ++ p->func_count++; ++ ++ /* allocate our function and group mapping index buffers */ ++ f = p->func = devm_kzalloc(p->dev, sizeof(struct rt2880_pmx_func) * p->func_count, GFP_KERNEL); ++ gpio_func.groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL); ++ if (!f || !gpio_func.groups) ++ return -1; ++ ++ /* add a backpointer to the function so it knows its group */ ++ gpio_func.group_count = p->group_count; ++ for (i = 0; i < gpio_func.group_count; i++) ++ gpio_func.groups[i] = i; ++ ++ f[c] = &gpio_func; ++ c++; ++ ++ /* add remaining functions */ ++ for (i = 0; i < p->group_count; i++) { ++ for (j = 0; j < p->groups[i].func_count; j++) { ++ f[c] = &p->groups[i].func[j]; ++ f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL); ++ f[c]->groups[0] = i; ++ f[c]->group_count = 1; ++ c++; ++ } ++ } ++ return 0; ++} ++ ++static int rt2880_pinmux_pins(struct rt2880_priv *p) ++{ ++ int i, j; ++ ++ /* loop over the functions and initialize the pins array. also work out the highest pin used */ ++ for (i = 0; i < p->func_count; i++) { ++ int pin; ++ ++ if (!p->func[i]->pin_count) ++ continue; ++ ++ p->func[i]->pins = devm_kzalloc(p->dev, sizeof(int) * p->func[i]->pin_count, GFP_KERNEL); ++ for (j = 0; j < p->func[i]->pin_count; j++) ++ p->func[i]->pins[j] = p->func[i]->pin_first + j; ++ ++ pin = p->func[i]->pin_first + p->func[i]->pin_count; ++ if (pin > p->max_pins) ++ p->max_pins = pin; ++ } ++ ++ /* the buffer that tells us which pins are gpio */ ++ p->gpio = devm_kzalloc(p->dev,sizeof(uint8_t) * p->max_pins, ++ GFP_KERNEL); ++ /* the pads needed to tell pinctrl about our pins */ ++ p->pads = devm_kzalloc(p->dev, ++ sizeof(struct pinctrl_pin_desc) * p->max_pins, ++ GFP_KERNEL); ++ if (!p->pads || !p->gpio ) { ++ dev_err(p->dev, "Failed to allocate gpio data\n"); ++ return -ENOMEM; ++ } ++ ++ memset(p->gpio, 1, sizeof(uint8_t) * p->max_pins); ++ for (i = 0; i < p->func_count; i++) { ++ if (!p->func[i]->pin_count) ++ continue; ++ ++ for (j = 0; j < p->func[i]->pin_count; j++) ++ p->gpio[p->func[i]->pins[j]] = 0; ++ } ++ ++ /* pin 0 is always a gpio */ ++ p->gpio[0] = 1; ++ ++ /* set the pads */ ++ for (i = 0; i < p->max_pins; i++) { ++ /* strlen("ioXY") + 1 = 5 */ ++ char *name = devm_kzalloc(p->dev, 5, GFP_KERNEL); ++ ++ if (!name) { ++ dev_err(p->dev, "Failed to allocate pad name\n"); ++ return -ENOMEM; ++ } ++ snprintf(name, 5, "io%d", i); ++ p->pads[i].number = i; ++ p->pads[i].name = name; ++ } ++ p->desc->pins = p->pads; ++ p->desc->npins = p->max_pins; ++ ++ return 0; ++} ++ ++static int rt2880_pinmux_probe(struct platform_device *pdev) ++{ ++ struct rt2880_priv *p; ++ struct pinctrl_dev *dev; ++ struct device_node *np; ++ ++ if (!rt2880_pinmux_data) ++ return -ENOSYS; ++ ++ /* setup the private data */ ++ p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL); ++ if (!p) ++ return -ENOMEM; ++ ++ p->dev = &pdev->dev; ++ p->desc = &rt2880_pctrl_desc; ++ p->groups = rt2880_pinmux_data; ++ platform_set_drvdata(pdev, p); ++ ++ /* init the device */ ++ if (rt2880_pinmux_index(p)) { ++ dev_err(&pdev->dev, "failed to load index\n"); ++ return -EINVAL; ++ } ++ if (rt2880_pinmux_pins(p)) { ++ dev_err(&pdev->dev, "failed to load pins\n"); ++ return -EINVAL; ++ } ++ dev = pinctrl_register(p->desc, &pdev->dev, p); ++ if (IS_ERR(dev)) ++ return PTR_ERR(dev); ++ ++ /* finalize by adding gpio ranges for enables gpio controllers */ ++ for_each_compatible_node(np, NULL, "ralink,rt2880-gpio") { ++ const __be32 *ngpio, *gpiobase; ++ struct pinctrl_gpio_range *range; ++ char *name; ++ ++ if (!of_device_is_available(np)) ++ continue; ++ ++ ngpio = of_get_property(np, "ralink,num-gpios", NULL); ++ gpiobase = of_get_property(np, "ralink,gpio-base", NULL); ++ if (!ngpio || !gpiobase) { ++ dev_err(&pdev->dev, "failed to load chip info\n"); ++ return -EINVAL; ++ } ++ ++ range = devm_kzalloc(p->dev, sizeof(struct pinctrl_gpio_range) + 4, GFP_KERNEL); ++ range->name = name = (char *) &range[1]; ++ sprintf(name, "pio"); ++ range->npins = __be32_to_cpu(*ngpio); ++ range->base = __be32_to_cpu(*gpiobase); ++ range->pin_base = range->base; ++ pinctrl_add_gpio_range(dev, range); ++ } ++ ++ return 0; ++} ++ ++static const struct of_device_id rt2880_pinmux_match[] = { ++ { .compatible = "ralink,rt2880-pinmux" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, rt2880_pinmux_match); ++ ++static struct platform_driver rt2880_pinmux_driver = { ++ .probe = rt2880_pinmux_probe, ++ .driver = { ++ .name = "rt2880-pinmux", ++ .owner = THIS_MODULE, ++ .of_match_table = rt2880_pinmux_match, ++ }, ++}; ++ ++int __init rt2880_pinmux_init(void) ++{ ++ return platform_driver_register(&rt2880_pinmux_driver); ++} ++ ++core_initcall_sync(rt2880_pinmux_init); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0031-PCI-MIPS-adds-rt2880-pci-support.patch b/target/linux/ramips/patches-3.14/0031-PCI-MIPS-adds-rt2880-pci-support.patch new file mode 100644 index 0000000000..3af4da6e12 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0031-PCI-MIPS-adds-rt2880-pci-support.patch @@ -0,0 +1,329 @@ +From 5b0bcc314005dd14eeae190948165a81eef7da1f Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:36:02 +0100 +Subject: [PATCH 31/57] PCI: MIPS: adds rt2880 pci support + +Add support for the pci found on the rt2880 SoC. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/pci/Makefile | 1 + + arch/mips/pci/pci-rt2880.c | 281 ++++++++++++++++++++++++++++++++++++++++++++ + arch/mips/ralink/Kconfig | 1 + + 3 files changed, 283 insertions(+) + create mode 100644 arch/mips/pci/pci-rt2880.c + +diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile +index d054bc8..6a0f453 100644 +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o + obj-$(CONFIG_LANTIQ) += fixup-lantiq.o + obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o + obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o ++obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o + obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o + obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o + obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o +diff --git a/arch/mips/pci/pci-rt2880.c b/arch/mips/pci/pci-rt2880.c +new file mode 100644 +index 0000000..e2c4730 +--- /dev/null ++++ b/arch/mips/pci/pci-rt2880.c +@@ -0,0 +1,281 @@ ++/* ++ * Ralink RT288x SoC PCI register definitions ++ * ++ * Copyright (C) 2009 John Crispin <blogic@openwrt.org> ++ * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * Parts of this file are based on Ralink's 2.6.21 BSP ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/io.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/of_platform.h> ++#include <linux/of_irq.h> ++#include <linux/of_pci.h> ++ ++#include <asm/mach-ralink/rt288x.h> ++ ++#define RT2880_PCI_BASE 0x00440000 ++#define RT288X_CPU_IRQ_PCI 4 ++ ++#define RT2880_PCI_MEM_BASE 0x20000000 ++#define RT2880_PCI_MEM_SIZE 0x10000000 ++#define RT2880_PCI_IO_BASE 0x00460000 ++#define RT2880_PCI_IO_SIZE 0x00010000 ++ ++#define RT2880_PCI_REG_PCICFG_ADDR 0x00 ++#define RT2880_PCI_REG_PCIMSK_ADDR 0x0c ++#define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10 ++#define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18 ++#define RT2880_PCI_REG_CONFIG_ADDR 0x20 ++#define RT2880_PCI_REG_CONFIG_DATA 0x24 ++#define RT2880_PCI_REG_MEMBASE 0x28 ++#define RT2880_PCI_REG_IOBASE 0x2c ++#define RT2880_PCI_REG_ID 0x30 ++#define RT2880_PCI_REG_CLASS 0x34 ++#define RT2880_PCI_REG_SUBID 0x38 ++#define RT2880_PCI_REG_ARBCTL 0x80 ++ ++static void __iomem *rt2880_pci_base; ++static DEFINE_SPINLOCK(rt2880_pci_lock); ++ ++static u32 rt2880_pci_reg_read(u32 reg) ++{ ++ return readl(rt2880_pci_base + reg); ++} ++ ++static void rt2880_pci_reg_write(u32 val, u32 reg) ++{ ++ writel(val, rt2880_pci_base + reg); ++} ++ ++static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot, ++ unsigned int func, unsigned int where) ++{ ++ return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | ++ 0x80000000); ++} ++ ++static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 *val) ++{ ++ unsigned long flags; ++ u32 address; ++ u32 data; ++ ++ address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), where); ++ ++ spin_lock_irqsave(&rt2880_pci_lock, flags); ++ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); ++ data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); ++ spin_unlock_irqrestore(&rt2880_pci_lock, flags); ++ ++ switch (size) { ++ case 1: ++ *val = (data >> ((where & 3) << 3)) & 0xff; ++ break; ++ case 2: ++ *val = (data >> ((where & 3) << 3)) & 0xffff; ++ break; ++ case 4: ++ *val = data; ++ break; ++ } ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn, ++ int where, int size, u32 val) ++{ ++ unsigned long flags; ++ u32 address; ++ u32 data; ++ ++ address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), ++ PCI_FUNC(devfn), where); ++ ++ spin_lock_irqsave(&rt2880_pci_lock, flags); ++ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); ++ data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); ++ ++ switch (size) { ++ case 1: ++ data = (data & ~(0xff << ((where & 3) << 3))) | ++ (val << ((where & 3) << 3)); ++ break; ++ case 2: ++ data = (data & ~(0xffff << ((where & 3) << 3))) | ++ (val << ((where & 3) << 3)); ++ break; ++ case 4: ++ data = val; ++ break; ++ } ++ ++ rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA); ++ spin_unlock_irqrestore(&rt2880_pci_lock, flags); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static struct pci_ops rt2880_pci_ops = { ++ .read = rt2880_pci_config_read, ++ .write = rt2880_pci_config_write, ++}; ++ ++static struct resource rt2880_pci_mem_resource = { ++ .name = "PCI MEM space", ++ .start = RT2880_PCI_MEM_BASE, ++ .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct resource rt2880_pci_io_resource = { ++ .name = "PCI IO space", ++ .start = RT2880_PCI_IO_BASE, ++ .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1, ++ .flags = IORESOURCE_IO, ++}; ++ ++static struct pci_controller rt2880_pci_controller = { ++ .pci_ops = &rt2880_pci_ops, ++ .mem_resource = &rt2880_pci_mem_resource, ++ .io_resource = &rt2880_pci_io_resource, ++}; ++ ++static inline u32 rt2880_pci_read_u32(unsigned long reg) ++{ ++ unsigned long flags; ++ u32 address; ++ u32 ret; ++ ++ address = rt2880_pci_get_cfgaddr(0, 0, 0, reg); ++ ++ spin_lock_irqsave(&rt2880_pci_lock, flags); ++ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); ++ ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); ++ spin_unlock_irqrestore(&rt2880_pci_lock, flags); ++ ++ return ret; ++} ++ ++static inline void rt2880_pci_write_u32(unsigned long reg, u32 val) ++{ ++ unsigned long flags; ++ u32 address; ++ ++ address = rt2880_pci_get_cfgaddr(0, 0, 0, reg); ++ ++ spin_lock_irqsave(&rt2880_pci_lock, flags); ++ rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); ++ rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA); ++ spin_unlock_irqrestore(&rt2880_pci_lock, flags); ++} ++ ++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ u16 cmd; ++ int irq = -1; ++ ++ if (dev->bus->number != 0) ++ return irq; ++ ++ switch (PCI_SLOT(dev->devfn)) { ++ case 0x00: ++ rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000); ++ (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0); ++ break; ++ case 0x11: ++ irq = RT288X_CPU_IRQ_PCI; ++ break; ++ default: ++ printk("%s:%s[%d] trying to alloc unknown pci irq\n", ++ __FILE__, __func__, __LINE__); ++ BUG(); ++ break; ++ } ++ ++ pci_write_config_byte((struct pci_dev*)dev, PCI_CACHE_LINE_SIZE, 0x14); ++ pci_write_config_byte((struct pci_dev*)dev, PCI_LATENCY_TIMER, 0xFF); ++ pci_read_config_word((struct pci_dev*)dev, PCI_COMMAND, &cmd); ++ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | ++ PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK | ++ PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY; ++ pci_write_config_word((struct pci_dev*)dev, PCI_COMMAND, cmd); ++ pci_write_config_byte((struct pci_dev*)dev, PCI_INTERRUPT_LINE, ++ dev->irq); ++ return irq; ++} ++ ++static int rt288x_pci_probe(struct platform_device *pdev) ++{ ++ void __iomem *io_map_base; ++ int i; ++ ++ rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE); ++ ++ io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE); ++ rt2880_pci_controller.io_map_base = (unsigned long) io_map_base; ++ set_io_port_base((unsigned long) io_map_base); ++ ++ ioport_resource.start = RT2880_PCI_IO_BASE; ++ ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1; ++ ++ rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR); ++ for(i = 0; i < 0xfffff; i++) {} ++ ++ rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL); ++ rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR); ++ rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE); ++ rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE); ++ rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR); ++ rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID); ++ rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS); ++ rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID); ++ rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR); ++ ++ rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000); ++ (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0); ++ ++ register_pci_controller(&rt2880_pci_controller); ++ return 0; ++} ++ ++int pcibios_plat_dev_init(struct pci_dev *dev) ++{ ++ return 0; ++} ++ ++static const struct of_device_id rt288x_pci_match[] = { ++ { .compatible = "ralink,rt288x-pci" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, rt288x_pci_match); ++ ++static struct platform_driver rt288x_pci_driver = { ++ .probe = rt288x_pci_probe, ++ .driver = { ++ .name = "rt288x-pci", ++ .owner = THIS_MODULE, ++ .of_match_table = rt288x_pci_match, ++ }, ++}; ++ ++int __init pcibios_init(void) ++{ ++ int ret = platform_driver_register(&rt288x_pci_driver); ++ if (ret) ++ pr_info("rt288x-pci: Error registering platform driver!"); ++ return ret; ++} ++ ++arch_initcall(pcibios_init); +diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig +index f93835f..eb2b2cd 100644 +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -21,6 +21,7 @@ choice + config SOC_RT288X + bool "RT288x" + select MIPS_L1_CACHE_SHIFT_4 ++ select HW_HAS_PCI + + config SOC_RT305X + bool "RT305x" +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-3.14/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch new file mode 100644 index 0000000000..48dae703cb --- /dev/null +++ b/target/linux/ramips/patches-3.14/0032-PCI-MIPS-adds-mt7620a-pcie-driver.patch @@ -0,0 +1,409 @@ +From 307b7a71a634ae3848fb7c5c05759d647e140e12 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sat, 18 May 2013 22:06:15 +0200 +Subject: [PATCH 32/57] PCI: MIPS: adds mt7620a pcie driver + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/pci/Makefile | 1 + + arch/mips/pci/pci-mt7620a.c | 363 +++++++++++++++++++++++++++++++++++++++++++ + arch/mips/ralink/Kconfig | 1 + + 3 files changed, 365 insertions(+) + create mode 100644 arch/mips/pci/pci-mt7620a.c + +diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile +index 6a0f453..b140299 100644 +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o + obj-$(CONFIG_LANTIQ) += fixup-lantiq.o + obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o + obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o ++obj-$(CONFIG_SOC_MT7620) += pci-mt7620a.o + obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o + obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o + obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o +diff --git a/arch/mips/pci/pci-mt7620a.c b/arch/mips/pci/pci-mt7620a.c +new file mode 100644 +index 0000000..271763c +--- /dev/null ++++ b/arch/mips/pci/pci-mt7620a.c +@@ -0,0 +1,363 @@ ++/* ++ * Ralink MT7620A SoC PCI support ++ * ++ * Copyright (C) 2007-2013 Bruce Chang ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/io.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++#include <linux/interrupt.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/of_irq.h> ++#include <linux/of_pci.h> ++#include <linux/reset.h> ++#include <linux/platform_device.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++ ++#define RALINK_PCI_MM_MAP_BASE 0x20000000 ++#define RALINK_PCI_IO_MAP_BASE 0x10160000 ++ ++#define RALINK_INT_PCIE0 4 ++#define RALINK_SYSTEM_CONTROL_BASE 0xb0000000 ++#define RALINK_SYSCFG1 0x14 ++#define RALINK_CLKCFG1 0x30 ++#define RALINK_GPIOMODE 0x60 ++#define RALINK_PCIE_CLK_GEN 0x7c ++#define RALINK_PCIE_CLK_GEN1 0x80 ++#define PCIEPHY0_CFG 0x90 ++#define PPLL_CFG1 0x9c ++#define PPLL_DRV 0xa0 ++#define RALINK_PCI_HOST_MODE_EN (1<<7) ++#define RALINK_PCIE_RC_MODE_EN (1<<8) ++#define RALINK_PCIE_RST (1<<23) ++#define RALINK_PCI_RST (1<<24) ++#define RALINK_PCI_CLK_EN (1<<19) ++#define RALINK_PCIE_CLK_EN (1<<21) ++#define PCI_SLOTx2 (1<<11) ++#define PCI_SLOTx1 (2<<11) ++#define PDRV_SW_SET (1<<31) ++#define LC_CKDRVPD_ (1<<19) ++ ++#define RALINK_PCI_CONFIG_ADDR 0x20 ++#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24 ++#define MEMORY_BASE 0x0 ++#define RALINK_PCIE0_RST (1<<26) ++#define RALINK_PCI_BASE 0xB0140000 ++#define RALINK_PCI_MEMBASE 0x28 ++#define RALINK_PCI_IOBASE 0x2C ++ ++#define RT6855_PCIE0_OFFSET 0x2000 ++ ++#define RALINK_PCI_PCICFG_ADDR 0x00 ++#define RALINK_PCI0_BAR0SETUP_ADDR 0x10 ++#define RALINK_PCI0_IMBASEBAR0_ADDR 0x18 ++#define RALINK_PCI0_ID 0x30 ++#define RALINK_PCI0_CLASS 0x34 ++#define RALINK_PCI0_SUBID 0x38 ++#define RALINK_PCI0_STATUS 0x50 ++#define RALINK_PCI_PCIMSK_ADDR 0x0C ++ ++#define RALINK_PCIE0_CLK_EN (1 << 26) ++ ++#define BUSY 0x80000000 ++#define WAITRETRY_MAX 10 ++#define WRITE_MODE (1UL << 23) ++#define DATA_SHIFT 0 ++#define ADDR_SHIFT 8 ++ ++ ++static void __iomem *bridge_base; ++static void __iomem *pcie_base; ++ ++static struct reset_control *rstpcie0; ++ ++static inline void bridge_w32(u32 val, unsigned reg) ++{ ++ iowrite32(val, bridge_base + reg); ++} ++ ++static inline u32 bridge_r32(unsigned reg) ++{ ++ return ioread32(bridge_base + reg); ++} ++ ++static inline void pcie_w32(u32 val, unsigned reg) ++{ ++ iowrite32(val, pcie_base + reg); ++} ++ ++static inline u32 pcie_r32(unsigned reg) ++{ ++ return ioread32(pcie_base + reg); ++} ++ ++static inline void pcie_m32(u32 clr, u32 set, unsigned reg) ++{ ++ u32 val = pcie_r32(reg); ++ val &= ~clr; ++ val |= set; ++ pcie_w32(val, reg); ++} ++ ++int wait_pciephy_busy(void) ++{ ++ unsigned long reg_value = 0x0, retry = 0; ++ ++ while (1) { ++ //reg_value = rareg(READMODE, PCIEPHY0_CFG, 0); ++ reg_value = pcie_r32(PCIEPHY0_CFG); ++ ++ if (reg_value & BUSY) ++ mdelay(100); ++ else ++ break; ++ if (retry++ > WAITRETRY_MAX){ ++ printk("PCIE-PHY retry failed.\n"); ++ return -1; ++ } ++ } ++ return 0; ++} ++ ++static void pcie_phy(unsigned long addr, unsigned long val) ++{ ++ wait_pciephy_busy(); ++ pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), PCIEPHY0_CFG); ++ mdelay(1); ++ wait_pciephy_busy(); ++} ++ ++static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 * val) ++{ ++ unsigned int slot = PCI_SLOT(devfn); ++ u8 func = PCI_FUNC(devfn); ++ u32 address; ++ u32 data; ++ ++ address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000; ++ bridge_w32(address, RALINK_PCI_CONFIG_ADDR); ++ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG); ++ ++ switch (size) { ++ case 1: ++ *val = (data >> ((where & 3) << 3)) & 0xff; ++ break; ++ case 2: ++ *val = (data >> ((where & 3) << 3)) & 0xffff; ++ break; ++ case 4: ++ *val = data; ++ break; ++ } ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val) ++{ ++ unsigned int slot = PCI_SLOT(devfn); ++ u8 func = PCI_FUNC(devfn); ++ u32 address; ++ u32 data; ++ ++ address = (((where & 0xF00) >> 8) << 24) | (bus->number << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 0x80000000; ++ bridge_w32(address, RALINK_PCI_CONFIG_ADDR); ++ data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRTUAL_REG); ++ ++ switch (size) { ++ case 1: ++ data = (data & ~(0xff << ((where & 3) << 3))) | ++ (val << ((where & 3) << 3)); ++ break; ++ case 2: ++ data = (data & ~(0xffff << ((where & 3) << 3))) | ++ (val << ((where & 3) << 3)); ++ break; ++ case 4: ++ data = val; ++ break; ++ } ++ ++ bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRTUAL_REG); ++ ++ return PCIBIOS_SUCCESSFUL; ++} ++ ++struct pci_ops mt7620a_pci_ops= { ++ .read = pci_config_read, ++ .write = pci_config_write, ++}; ++ ++static struct resource mt7620a_res_pci_mem1 = { ++ .name = "pci memory", ++ .start = RALINK_PCI_MM_MAP_BASE, ++ .end = (u32) ((RALINK_PCI_MM_MAP_BASE + (unsigned char *)0x0fffffff)), ++ .flags = IORESOURCE_MEM, ++}; ++static struct resource mt7620a_res_pci_io1 = { ++ .name = "pci io", ++ .start = RALINK_PCI_IO_MAP_BASE, ++ .end = (u32) ((RALINK_PCI_IO_MAP_BASE + (unsigned char *)0x0ffff)), ++ .flags = IORESOURCE_IO, ++}; ++ ++struct pci_controller mt7620a_controller = { ++ .pci_ops = &mt7620a_pci_ops, ++ .mem_resource = &mt7620a_res_pci_mem1, ++ .io_resource = &mt7620a_res_pci_io1, ++ .mem_offset = 0x00000000UL, ++ .io_offset = 0x00000000UL, ++ .io_map_base = 0xa0000000, ++}; ++ ++static int mt7620a_pci_probe(struct platform_device *pdev) ++{ ++ struct resource *bridge_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ struct resource *pcie_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ ++ rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0"); ++ if (IS_ERR(rstpcie0)) ++ return PTR_ERR(rstpcie0); ++ ++ bridge_base = devm_request_and_ioremap(&pdev->dev, bridge_res); ++ if (!bridge_base) ++ return -ENOMEM; ++ ++ pcie_base = devm_request_and_ioremap(&pdev->dev, pcie_res); ++ if (!pcie_base) ++ return -ENOMEM; ++ ++ iomem_resource.start = 0; ++ iomem_resource.end= ~0; ++ ioport_resource.start= 0; ++ ioport_resource.end = ~0; ++ ++ /* PCIE: bypass PCIe DLL */ ++ pcie_phy(0x0, 0x80); ++ pcie_phy(0x1, 0x04); ++ /* PCIE: Elastic buffer control */ ++ pcie_phy(0x68, 0xB4); ++ ++ reset_control_assert(rstpcie0); ++ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); ++ rt_sysc_m32(1<<19, 1<<31, PPLL_DRV); ++ rt_sysc_m32(0x3 << 16, 0, RALINK_GPIOMODE); ++ ++ reset_control_deassert(rstpcie0); ++ rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1); ++ ++ mdelay(100); ++ ++ if (!(rt_sysc_r32(PPLL_CFG1) & 1<<23)) { ++ printk("MT7620 PPLL unlock\n"); ++ reset_control_assert(rstpcie0); ++ rt_sysc_m32(BIT(26), 0, RALINK_CLKCFG1); ++ return 0; ++ } ++ rt_sysc_m32((0x1<<18) | (0x1<<17), (0x1 << 19) | (0x1 << 31), PPLL_DRV); ++ ++ mdelay(100); ++ reset_control_assert(rstpcie0); ++ rt_sysc_m32(0x30, 2 << 4, RALINK_SYSCFG1); ++ ++ rt_sysc_m32(~0x7fffffff, 0x80000000, RALINK_PCIE_CLK_GEN); ++ rt_sysc_m32(~0x80ffffff, 0xa << 24, RALINK_PCIE_CLK_GEN1); ++ ++ mdelay(50); ++ reset_control_deassert(rstpcie0); ++ pcie_m32(BIT(1), 0, RALINK_PCI_PCICFG_ADDR); ++ mdelay(100); ++ ++ if (( pcie_r32(RALINK_PCI0_STATUS) & 0x1) == 0) { ++ reset_control_assert(rstpcie0); ++ rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); ++ rt_sysc_m32(LC_CKDRVPD_, PDRV_SW_SET, PPLL_DRV); ++ printk("PCIE0 no card, disable it(RST&CLK)\n"); ++ } ++ ++ bridge_w32(0xffffffff, RALINK_PCI_MEMBASE); ++ bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE); ++ ++ pcie_w32(0x7FFF0000, RALINK_PCI0_BAR0SETUP_ADDR); ++ pcie_w32(MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR); ++ pcie_w32(0x08021814, RALINK_PCI0_ID); ++ pcie_w32(0x06040001, RALINK_PCI0_CLASS); ++ pcie_w32(0x28801814, RALINK_PCI0_SUBID); ++ pcie_m32(0, BIT(20), RALINK_PCI_PCIMSK_ADDR); ++ ++ register_pci_controller(&mt7620a_controller); ++ ++ return 0; ++} ++ ++int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ const struct resource *res; ++ u16 cmd; ++ u32 val; ++ int i, irq = 0; ++ ++ if ((dev->bus->number == 0) && (slot == 0)) { ++ pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); //open 7FFF:2G; ENABLE ++ pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, MEMORY_BASE); ++ pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val); ++ } else if ((dev->bus->number == 1) && (slot == 0x0)) { ++ irq = RALINK_INT_PCIE0; ++ } else { ++ printk("bus=0x%x, slot = 0x%x\n", dev->bus->number, slot); ++ return 0; ++ } ++ ++ for (i = 0; i < 6; i++) { ++ res = &dev->resource[i]; ++ } ++ ++ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); //configure cache line size 0x14 ++ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xFF); //configure latency timer 0x10 ++ pci_read_config_word(dev, PCI_COMMAND, &cmd); ++ ++ // FIXME ++ cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; ++ pci_write_config_word(dev, PCI_COMMAND, cmd); ++ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); ++ //pci_write_config_byte(dev, PCI_INTERRUPT_PIN, dev->irq); ++ ++ return irq; ++} ++ ++int pcibios_plat_dev_init(struct pci_dev *dev) ++{ ++ return 0; ++} ++ ++static const struct of_device_id mt7620a_pci_ids[] = { ++ { .compatible = "ralink,mt7620a-pci" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, mt7620a_pci_ids); ++ ++static struct platform_driver mt7620a_pci_driver = { ++ .probe = mt7620a_pci_probe, ++ .driver = { ++ .name = "mt7620a-pci", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(mt7620a_pci_ids), ++ }, ++}; ++ ++static int __init mt7620a_pci_init(void) ++{ ++ return platform_driver_register(&mt7620a_pci_driver); ++} ++ ++arch_initcall(mt7620a_pci_init); +diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig +index eb2b2cd..ce84aad 100644 +--- a/arch/mips/ralink/Kconfig ++++ b/arch/mips/ralink/Kconfig +@@ -39,6 +39,7 @@ choice + bool "MT7620/8" + select USB_ARCH_HAS_OHCI + select USB_ARCH_HAS_EHCI ++ select HW_HAS_PCI + + config SOC_MT7621 + bool "MT7621" +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0033-NET-multi-phy-support.patch b/target/linux/ramips/patches-3.14/0033-NET-multi-phy-support.patch new file mode 100644 index 0000000000..99dd092b53 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0033-NET-multi-phy-support.patch @@ -0,0 +1,60 @@ +From 9c34372c25519234add1cfdfe2b69c0847f2037e Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:38:50 +0100 +Subject: [PATCH 33/57] NET: multi phy support + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/net/phy/phy.c | 9 ++++++--- + include/linux/phy.h | 1 + + 2 files changed, 7 insertions(+), 3 deletions(-) + +diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c +index 76d96b9..371f0b6 100644 +--- a/drivers/net/phy/phy.c ++++ b/drivers/net/phy/phy.c +@@ -715,7 +715,8 @@ void phy_state_machine(struct work_struct *work) + /* If the link is down, give up on negotiation for now */ + if (!phydev->link) { + phydev->state = PHY_NOLINK; +- netif_carrier_off(phydev->attached_dev); ++ if (!phydev->no_auto_carrier_off) ++ netif_carrier_off(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + break; + } +@@ -781,7 +782,8 @@ void phy_state_machine(struct work_struct *work) + netif_carrier_on(phydev->attached_dev); + } else { + phydev->state = PHY_NOLINK; +- netif_carrier_off(phydev->attached_dev); ++ if (!phydev->no_auto_carrier_off) ++ netif_carrier_off(phydev->attached_dev); + } + + phydev->adjust_link(phydev->attached_dev); +@@ -793,7 +795,8 @@ void phy_state_machine(struct work_struct *work) + case PHY_HALTED: + if (phydev->link) { + phydev->link = 0; +- netif_carrier_off(phydev->attached_dev); ++ if (!phydev->no_auto_carrier_off) ++ netif_carrier_off(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + do_suspend = 1; + } +diff --git a/include/linux/phy.h b/include/linux/phy.h +index 565188c..91b93f7 100644 +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -308,6 +308,7 @@ struct phy_device { + struct phy_c45_device_ids c45_ids; + bool is_c45; + bool is_internal; ++ bool no_auto_carrier_off; + + enum phy_state state; + +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0034-NET-add-of_get_mac_address_mtd.patch b/target/linux/ramips/patches-3.14/0034-NET-add-of_get_mac_address_mtd.patch new file mode 100644 index 0000000000..0934ac29f3 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0034-NET-add-of_get_mac_address_mtd.patch @@ -0,0 +1,83 @@ +From 92f38460229a8816404408f036f0a374f1013d0e Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:40:01 +0100 +Subject: [PATCH 34/57] NET: add of_get_mac_address_mtd() + +Many embedded devices have information such as mac addresses stored inside mtd +devices. This patch allows us to add a property inside a node describing a +network interface. The new property points at a mtd partition with an offset +where the mac address can be found. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/of/of_net.c | 37 +++++++++++++++++++++++++++++++++++++ + include/linux/of_net.h | 1 + + 2 files changed, 38 insertions(+) + +diff --git a/drivers/of/of_net.c b/drivers/of/of_net.c +index a208a45..de93111 100644 +--- a/drivers/of/of_net.c ++++ b/drivers/of/of_net.c +@@ -10,6 +10,7 @@ + #include <linux/of_net.h> + #include <linux/phy.h> + #include <linux/export.h> ++#include <linux/mtd/mtd.h> + + /** + * It maps 'enum phy_interface_t' found in include/linux/phy.h +@@ -94,3 +95,39 @@ const void *of_get_mac_address(struct device_node *np) + return NULL; + } + EXPORT_SYMBOL(of_get_mac_address); ++ ++int of_get_mac_address_mtd(struct device_node *np, void *mac) ++{ ++ struct device_node *mtd_np = NULL; ++ size_t retlen; ++ int size, ret; ++ struct mtd_info *mtd; ++ const char *part; ++ const __be32 *list; ++ phandle phandle; ++ ++ list = of_get_property(np, "mtd-mac-address", &size); ++ if (!list || (size != (2 * sizeof(*list)))) ++ return -ENOENT; ++ ++ phandle = be32_to_cpup(list++); ++ if (phandle) ++ mtd_np = of_find_node_by_phandle(phandle); ++ ++ if (!mtd_np) ++ return -ENOENT; ++ ++ part = of_get_property(mtd_np, "label", NULL); ++ if (!part) ++ part = mtd_np->name; ++ ++ mtd = get_mtd_device_nm(part); ++ if (IS_ERR(mtd)) ++ return PTR_ERR(mtd); ++ ++ ret = mtd_read(mtd, be32_to_cpup(list), 6, &retlen, (u_char *) mac); ++ put_mtd_device(mtd); ++ ++ return ret; ++} ++EXPORT_SYMBOL_GPL(of_get_mac_address_mtd); +diff --git a/include/linux/of_net.h b/include/linux/of_net.h +index 34597c8..cdfbc60 100644 +--- a/include/linux/of_net.h ++++ b/include/linux/of_net.h +@@ -11,6 +11,7 @@ + #include <linux/of.h> + extern int of_get_phy_mode(struct device_node *np); + extern const void *of_get_mac_address(struct device_node *np); ++extern int of_get_mac_address_mtd(struct device_node *np, void *mac); + #else + static inline int of_get_phy_mode(struct device_node *np) + { +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-3.14/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch new file mode 100644 index 0000000000..6a7c0c2348 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0035-NET-MIPS-add-ralink-SoC-ethernet-driver.patch @@ -0,0 +1,5128 @@ +From c55d6cf3e2c593bf7d228c6532ec9bd8da82e09d Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 22 Apr 2013 23:20:03 +0200 +Subject: [PATCH 35/57] NET: MIPS: add ralink SoC ethernet driver + +Add support for Ralink FE and ESW. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + .../include/asm/mach-ralink/rt305x_esw_platform.h | 27 + + arch/mips/ralink/rt305x.c | 1 + + drivers/net/ethernet/Kconfig | 1 + + drivers/net/ethernet/Makefile | 1 + + drivers/net/ethernet/ralink/Kconfig | 32 + + drivers/net/ethernet/ralink/Makefile | 18 + + drivers/net/ethernet/ralink/esw_rt3052.c | 1463 ++++++++++++++++++++ + drivers/net/ethernet/ralink/esw_rt3052.h | 32 + + drivers/net/ethernet/ralink/gsw_mt7620a.c | 566 ++++++++ + drivers/net/ethernet/ralink/gsw_mt7620a.h | 30 + + drivers/net/ethernet/ralink/mdio.c | 244 ++++ + drivers/net/ethernet/ralink/mdio.h | 29 + + drivers/net/ethernet/ralink/mdio_rt2880.c | 232 ++++ + drivers/net/ethernet/ralink/mdio_rt2880.h | 26 + + drivers/net/ethernet/ralink/mt7530.c | 579 ++++++++ + drivers/net/ethernet/ralink/mt7530.h | 20 + + drivers/net/ethernet/ralink/ralink_soc_eth.c | 844 +++++++++++ + drivers/net/ethernet/ralink/ralink_soc_eth.h | 384 +++++ + drivers/net/ethernet/ralink/soc_mt7620.c | 172 +++ + drivers/net/ethernet/ralink/soc_rt2880.c | 52 + + drivers/net/ethernet/ralink/soc_rt305x.c | 113 ++ + drivers/net/ethernet/ralink/soc_rt3883.c | 60 + + 22 files changed, 4926 insertions(+) + create mode 100644 arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h + create mode 100644 drivers/net/ethernet/ralink/Kconfig + create mode 100644 drivers/net/ethernet/ralink/Makefile + create mode 100644 drivers/net/ethernet/ralink/esw_rt3052.c + create mode 100644 drivers/net/ethernet/ralink/esw_rt3052.h + create mode 100644 drivers/net/ethernet/ralink/gsw_mt7620a.c + create mode 100644 drivers/net/ethernet/ralink/gsw_mt7620a.h + create mode 100644 drivers/net/ethernet/ralink/mdio.c + create mode 100644 drivers/net/ethernet/ralink/mdio.h + create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.c + create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.h + create mode 100644 drivers/net/ethernet/ralink/mt7530.c + create mode 100644 drivers/net/ethernet/ralink/mt7530.h + create mode 100644 drivers/net/ethernet/ralink/ralink_soc_eth.c + create mode 100644 drivers/net/ethernet/ralink/ralink_soc_eth.h + create mode 100644 drivers/net/ethernet/ralink/soc_mt7620.c + create mode 100644 drivers/net/ethernet/ralink/soc_rt2880.c + create mode 100644 drivers/net/ethernet/ralink/soc_rt305x.c + create mode 100644 drivers/net/ethernet/ralink/soc_rt3883.c + +diff --git a/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h +new file mode 100644 +index 0000000..2098c5c +--- /dev/null ++++ b/arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h +@@ -0,0 +1,27 @@ ++/* ++ * Ralink RT305x SoC platform device registration ++ * ++ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#ifndef _RT305X_ESW_PLATFORM_H ++#define _RT305X_ESW_PLATFORM_H ++ ++enum { ++ RT305X_ESW_VLAN_CONFIG_NONE = 0, ++ RT305X_ESW_VLAN_CONFIG_LLLLW, ++ RT305X_ESW_VLAN_CONFIG_WLLLL, ++}; ++ ++struct rt305x_esw_platform_data ++{ ++ u8 vlan_config; ++ u32 reg_initval_fct2; ++ u32 reg_initval_fpa2; ++}; ++ ++#endif /* _RT305X_ESW_PLATFORM_H */ +diff --git a/arch/mips/ralink/rt305x.c b/arch/mips/ralink/rt305x.c +index 356d6a0..ef99d78 100644 +--- a/arch/mips/ralink/rt305x.c ++++ b/arch/mips/ralink/rt305x.c +@@ -199,6 +199,7 @@ void __init ralink_clk_init(void) + } + + ralink_clk_add("cpu", cpu_rate); ++ ralink_clk_add("sys", sys_rate); + ralink_clk_add("10000b00.spi", sys_rate); + ralink_clk_add("10000100.timer", wdt_rate); + ralink_clk_add("10000120.watchdog", wdt_rate); +diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig +index 506b024..ef6a274 100644 +--- a/drivers/net/ethernet/Kconfig ++++ b/drivers/net/ethernet/Kconfig +@@ -134,6 +134,7 @@ config ETHOC + source "drivers/net/ethernet/packetengines/Kconfig" + source "drivers/net/ethernet/pasemi/Kconfig" + source "drivers/net/ethernet/qlogic/Kconfig" ++source "drivers/net/ethernet/ralink/Kconfig" + source "drivers/net/ethernet/realtek/Kconfig" + source "drivers/net/ethernet/renesas/Kconfig" + source "drivers/net/ethernet/rdc/Kconfig" +diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile +index c0b8789..7c3eb7b 100644 +--- a/drivers/net/ethernet/Makefile ++++ b/drivers/net/ethernet/Makefile +@@ -56,6 +56,7 @@ obj-$(CONFIG_ETHOC) += ethoc.o + obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/ + obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/ + obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ ++obj-$(CONFIG_NET_RALINK) += ralink/ + obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ + obj-$(CONFIG_SH_ETH) += renesas/ + obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ +diff --git a/drivers/net/ethernet/ralink/Kconfig b/drivers/net/ethernet/ralink/Kconfig +new file mode 100644 +index 0000000..727ed78 +--- /dev/null ++++ b/drivers/net/ethernet/ralink/Kconfig +@@ -0,0 +1,32 @@ ++config NET_RALINK ++ tristate "Ralink RT288X/RT3X5X/RT3662/RT3883/MT7620 ethernet driver" ++ depends on RALINK ++ help ++ This driver supports the ethernet mac inside the ralink wisocs ++ ++if NET_RALINK ++ ++config NET_RALINK_MDIO ++ def_bool NET_RALINK ++ depends on (SOC_RT288X || SOC_RT3883 || SOC_MT7620) ++ select PHYLIB ++ ++config NET_RALINK_MDIO_RT2880 ++ def_bool NET_RALINK ++ depends on (SOC_RT288X || SOC_RT3883) ++ select NET_RALINK_MDIO ++ ++config NET_RALINK_ESW_RT3052 ++ def_bool NET_RALINK ++ depends on SOC_RT305X ++ select PHYLIB ++ select SWCONFIG ++ ++config NET_RALINK_GSW_MT7620 ++ def_bool NET_RALINK ++ depends on SOC_MT7620 ++ select INET_LRO ++ select NET_RALINK_MDIO ++ select PHYLIB ++ select SWCONFIG ++endif +diff --git a/drivers/net/ethernet/ralink/Makefile b/drivers/net/ethernet/ralink/Makefile +new file mode 100644 +index 0000000..de64edf +--- /dev/null ++++ b/drivers/net/ethernet/ralink/Makefile +@@ -0,0 +1,18 @@ ++# ++# Makefile for the Ralink SoCs built-in ethernet macs ++# ++ ++ralink-eth-y += ralink_soc_eth.o ++ ++ralink-eth-$(CONFIG_NET_RALINK_MDIO) += mdio.o ++ralink-eth-$(CONFIG_NET_RALINK_MDIO_RT2880) += mdio_rt2880.o ++ ++ralink-eth-$(CONFIG_NET_RALINK_ESW_RT3052) += esw_rt3052.o ++ralink-eth-$(CONFIG_NET_RALINK_GSW_MT7620) += gsw_mt7620a.o mt7530.o ++ ++ralink-eth-$(CONFIG_SOC_RT288X) += soc_rt2880.o ++ralink-eth-$(CONFIG_SOC_RT305X) += soc_rt305x.o ++ralink-eth-$(CONFIG_SOC_RT3883) += soc_rt3883.o ++ralink-eth-$(CONFIG_SOC_MT7620) += soc_mt7620.o ++ ++obj-$(CONFIG_NET_RALINK) += ralink-eth.o +diff --git a/drivers/net/ethernet/ralink/esw_rt3052.c b/drivers/net/ethernet/ralink/esw_rt3052.c +new file mode 100644 +index 0000000..b937062 +--- /dev/null ++++ b/drivers/net/ethernet/ralink/esw_rt3052.c +@@ -0,0 +1,1463 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/dma-mapping.h> ++#include <linux/init.h> ++#include <linux/skbuff.h> ++#include <linux/etherdevice.h> ++#include <linux/ethtool.h> ++#include <linux/platform_device.h> ++#include <linux/of_device.h> ++#include <linux/clk.h> ++#include <linux/of_net.h> ++#include <linux/of_mdio.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++ ++#include "ralink_soc_eth.h" ++ ++#include <linux/ioport.h> ++#include <linux/switch.h> ++#include <linux/mii.h> ++ ++#include <ralink_regs.h> ++#include <asm/mach-ralink/rt305x.h> ++#include <asm/mach-ralink/rt305x_esw_platform.h> ++ ++/* ++ * HW limitations for this switch: ++ * - No large frame support (PKT_MAX_LEN at most 1536) ++ * - Can't have untagged vlan and tagged vlan on one port at the same time, ++ * though this might be possible using the undocumented PPE. ++ */ ++ ++#define RT305X_ESW_REG_ISR 0x00 ++#define RT305X_ESW_REG_IMR 0x04 ++#define RT305X_ESW_REG_FCT0 0x08 ++#define RT305X_ESW_REG_PFC1 0x14 ++#define RT305X_ESW_REG_ATS 0x24 ++#define RT305X_ESW_REG_ATS0 0x28 ++#define RT305X_ESW_REG_ATS1 0x2c ++#define RT305X_ESW_REG_ATS2 0x30 ++#define RT305X_ESW_REG_PVIDC(_n) (0x40 + 4 * (_n)) ++#define RT305X_ESW_REG_VLANI(_n) (0x50 + 4 * (_n)) ++#define RT305X_ESW_REG_VMSC(_n) (0x70 + 4 * (_n)) ++#define RT305X_ESW_REG_POA 0x80 ++#define RT305X_ESW_REG_FPA 0x84 ++#define RT305X_ESW_REG_SOCPC 0x8c ++#define RT305X_ESW_REG_POC0 0x90 ++#define RT305X_ESW_REG_POC1 0x94 ++#define RT305X_ESW_REG_POC2 0x98 ++#define RT305X_ESW_REG_SGC 0x9c ++#define RT305X_ESW_REG_STRT 0xa0 ++#define RT305X_ESW_REG_PCR0 0xc0 ++#define RT305X_ESW_REG_PCR1 0xc4 ++#define RT305X_ESW_REG_FPA2 0xc8 ++#define RT305X_ESW_REG_FCT2 0xcc ++#define RT305X_ESW_REG_SGC2 0xe4 ++#define RT305X_ESW_REG_P0LED 0xa4 ++#define RT305X_ESW_REG_P1LED 0xa8 ++#define RT305X_ESW_REG_P2LED 0xac ++#define RT305X_ESW_REG_P3LED 0xb0 ++#define RT305X_ESW_REG_P4LED 0xb4 ++#define RT305X_ESW_REG_PXPC(_x) (0xe8 + (4 * _x)) ++#define RT305X_ESW_REG_P1PC 0xec ++#define RT305X_ESW_REG_P2PC 0xf0 ++#define RT305X_ESW_REG_P3PC 0xf4 ++#define RT305X_ESW_REG_P4PC 0xf8 ++#define RT305X_ESW_REG_P5PC 0xfc ++ ++#define RT305X_ESW_LED_LINK 0 ++#define RT305X_ESW_LED_100M 1 ++#define RT305X_ESW_LED_DUPLEX 2 ++#define RT305X_ESW_LED_ACTIVITY 3 ++#define RT305X_ESW_LED_COLLISION 4 ++#define RT305X_ESW_LED_LINKACT 5 ++#define RT305X_ESW_LED_DUPLCOLL 6 ++#define RT305X_ESW_LED_10MACT 7 ++#define RT305X_ESW_LED_100MACT 8 ++/* Additional led states not in datasheet: */ ++#define RT305X_ESW_LED_BLINK 10 ++#define RT305X_ESW_LED_ON 12 ++ ++#define RT305X_ESW_LINK_S 25 ++#define RT305X_ESW_DUPLEX_S 9 ++#define RT305X_ESW_SPD_S 0 ++ ++#define RT305X_ESW_PCR0_WT_NWAY_DATA_S 16 ++#define RT305X_ESW_PCR0_WT_PHY_CMD BIT(13) ++#define RT305X_ESW_PCR0_CPU_PHY_REG_S 8 ++ ++#define RT305X_ESW_PCR1_WT_DONE BIT(0) ++ ++#define RT305X_ESW_ATS_TIMEOUT (5 * HZ) ++#define RT305X_ESW_PHY_TIMEOUT (5 * HZ) ++ ++#define RT305X_ESW_PVIDC_PVID_M 0xfff ++#define RT305X_ESW_PVIDC_PVID_S 12 ++ ++#define RT305X_ESW_VLANI_VID_M 0xfff ++#define RT305X_ESW_VLANI_VID_S 12 ++ ++#define RT305X_ESW_VMSC_MSC_M 0xff ++#define RT305X_ESW_VMSC_MSC_S 8 ++ ++#define RT305X_ESW_SOCPC_DISUN2CPU_S 0 ++#define RT305X_ESW_SOCPC_DISMC2CPU_S 8 ++#define RT305X_ESW_SOCPC_DISBC2CPU_S 16 ++#define RT305X_ESW_SOCPC_CRC_PADDING BIT(25) ++ ++#define RT305X_ESW_POC0_EN_BP_S 0 ++#define RT305X_ESW_POC0_EN_FC_S 8 ++#define RT305X_ESW_POC0_DIS_RMC2CPU_S 16 ++#define RT305X_ESW_POC0_DIS_PORT_M 0x7f ++#define RT305X_ESW_POC0_DIS_PORT_S 23 ++ ++#define RT305X_ESW_POC2_UNTAG_EN_M 0xff ++#define RT305X_ESW_POC2_UNTAG_EN_S 0 ++#define RT305X_ESW_POC2_ENAGING_S 8 ++#define RT305X_ESW_POC2_DIS_UC_PAUSE_S 16 ++ ++#define RT305X_ESW_SGC2_DOUBLE_TAG_M 0x7f ++#define RT305X_ESW_SGC2_DOUBLE_TAG_S 0 ++#define RT305X_ESW_SGC2_LAN_PMAP_M 0x3f ++#define RT305X_ESW_SGC2_LAN_PMAP_S 24 ++ ++#define RT305X_ESW_PFC1_EN_VLAN_M 0xff ++#define RT305X_ESW_PFC1_EN_VLAN_S 16 ++#define RT305X_ESW_PFC1_EN_TOS_S 24 ++ ++#define RT305X_ESW_VLAN_NONE 0xfff ++ ++#define RT305X_ESW_GSC_BC_STROM_MASK 0x3 ++#define RT305X_ESW_GSC_BC_STROM_SHIFT 4 ++ ++#define RT305X_ESW_GSC_LED_FREQ_MASK 0x3 ++#define RT305X_ESW_GSC_LED_FREQ_SHIFT 23 ++ ++#define RT305X_ESW_POA_LINK_MASK 0x1f ++#define RT305X_ESW_POA_LINK_SHIFT 25 ++ ++#define RT305X_ESW_PORT_ST_CHG BIT(26) ++#define RT305X_ESW_PORT0 0 ++#define RT305X_ESW_PORT1 1 ++#define RT305X_ESW_PORT2 2 ++#define RT305X_ESW_PORT3 3 ++#define RT305X_ESW_PORT4 4 ++#define RT305X_ESW_PORT5 5 ++#define RT305X_ESW_PORT6 6 ++ ++#define RT305X_ESW_PORTS_NONE 0 ++ ++#define RT305X_ESW_PMAP_LLLLLL 0x3f ++#define RT305X_ESW_PMAP_LLLLWL 0x2f ++#define RT305X_ESW_PMAP_WLLLLL 0x3e ++ ++#define RT305X_ESW_PORTS_INTERNAL \ ++ (BIT(RT305X_ESW_PORT0) | BIT(RT305X_ESW_PORT1) | \ ++ BIT(RT305X_ESW_PORT2) | BIT(RT305X_ESW_PORT3) | \ ++ BIT(RT305X_ESW_PORT4)) ++ ++#define RT305X_ESW_PORTS_NOCPU \ ++ (RT305X_ESW_PORTS_INTERNAL | BIT(RT305X_ESW_PORT5)) ++ ++#define RT305X_ESW_PORTS_CPU BIT(RT305X_ESW_PORT6) ++ ++#define RT305X_ESW_PORTS_ALL \ ++ (RT305X_ESW_PORTS_NOCPU | RT305X_ESW_PORTS_CPU) ++ ++#define RT305X_ESW_NUM_VLANS 16 ++#define RT305X_ESW_NUM_VIDS 4096 ++#define RT305X_ESW_NUM_PORTS 7 ++#define RT305X_ESW_NUM_LANWAN 6 ++#define RT305X_ESW_NUM_LEDS 5 ++ ++#define RT5350_ESW_REG_PXTPC(_x) (0x150 + (4 * _x)) ++#define RT5350_EWS_REG_LED_POLARITY 0x168 ++#define RT5350_RESET_EPHY BIT(24) ++#define SYSC_REG_RESET_CTRL 0x34 ++ ++enum { ++ /* Global attributes. */ ++ RT305X_ESW_ATTR_ENABLE_VLAN, ++ RT305X_ESW_ATTR_ALT_VLAN_DISABLE, ++ RT305X_ESW_ATTR_BC_STATUS, ++ RT305X_ESW_ATTR_LED_FREQ, ++ /* Port attributes. */ ++ RT305X_ESW_ATTR_PORT_DISABLE, ++ RT305X_ESW_ATTR_PORT_DOUBLETAG, ++ RT305X_ESW_ATTR_PORT_UNTAG, ++ RT305X_ESW_ATTR_PORT_LED, ++ RT305X_ESW_ATTR_PORT_LAN, ++ RT305X_ESW_ATTR_PORT_RECV_BAD, ++ RT305X_ESW_ATTR_PORT_RECV_GOOD, ++ RT5350_ESW_ATTR_PORT_TR_BAD, ++ RT5350_ESW_ATTR_PORT_TR_GOOD, ++}; ++ ++struct esw_port { ++ bool disable; ++ bool doubletag; ++ bool untag; ++ u8 led; ++ u16 pvid; ++}; ++ ++struct esw_vlan { ++ u8 ports; ++ u16 vid; ++}; ++ ++struct rt305x_esw { ++ struct device *dev; ++ void __iomem *base; ++ int irq; ++ const struct rt305x_esw_platform_data *pdata; ++ /* Protects against concurrent register rmw operations. */ ++ spinlock_t reg_rw_lock; ++ ++ unsigned char port_map; ++ unsigned int reg_initval_fct2; ++ unsigned int reg_initval_fpa2; ++ unsigned int reg_led_polarity; ++ ++ ++ struct switch_dev swdev; ++ bool global_vlan_enable; ++ bool alt_vlan_disable; ++ int bc_storm_protect; ++ int led_frequency; ++ struct esw_vlan vlans[RT305X_ESW_NUM_VLANS]; ++ struct esw_port ports[RT305X_ESW_NUM_PORTS]; ++ ++}; ++ ++static inline void esw_w32(struct rt305x_esw *esw, u32 val, unsigned reg) ++{ ++ __raw_writel(val, esw->base + reg); ++} ++ ++static inline u32 esw_r32(struct rt305x_esw *esw, unsigned reg) ++{ ++ return __raw_readl(esw->base + reg); ++} ++ ++static inline void esw_rmw_raw(struct rt305x_esw *esw, unsigned reg, unsigned long mask, ++ unsigned long val) ++{ ++ unsigned long t; ++ ++ t = __raw_readl(esw->base + reg) & ~mask; ++ __raw_writel(t | val, esw->base + reg); ++} ++ ++static void esw_rmw(struct rt305x_esw *esw, unsigned reg, unsigned long mask, ++ unsigned long val) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&esw->reg_rw_lock, flags); ++ esw_rmw_raw(esw, reg, mask, val); ++ spin_unlock_irqrestore(&esw->reg_rw_lock, flags); ++} ++ ++static u32 rt305x_mii_write(struct rt305x_esw *esw, u32 phy_addr, u32 phy_register, ++ u32 write_data) ++{ ++ unsigned long t_start = jiffies; ++ int ret = 0; ++ ++ while (1) { ++ if (!(esw_r32(esw, RT305X_ESW_REG_PCR1) & ++ RT305X_ESW_PCR1_WT_DONE)) ++ break; ++ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) { ++ ret = 1; ++ goto out; ++ } ++ } ++ ++ write_data &= 0xffff; ++ esw_w32(esw, ++ (write_data << RT305X_ESW_PCR0_WT_NWAY_DATA_S) | ++ (phy_register << RT305X_ESW_PCR0_CPU_PHY_REG_S) | ++ (phy_addr) | RT305X_ESW_PCR0_WT_PHY_CMD, ++ RT305X_ESW_REG_PCR0); ++ ++ t_start = jiffies; ++ while (1) { ++ if (esw_r32(esw, RT305X_ESW_REG_PCR1) & ++ RT305X_ESW_PCR1_WT_DONE) ++ break; ++ ++ if (time_after(jiffies, t_start + RT305X_ESW_PHY_TIMEOUT)) { ++ ret = 1; ++ break; ++ } ++ } ++out: ++ if (ret) ++ printk(KERN_ERR "ramips_eth: MDIO timeout\n"); ++ return ret; ++} ++ ++static unsigned esw_get_vlan_id(struct rt305x_esw *esw, unsigned vlan) ++{ ++ unsigned s; ++ unsigned val; ++ ++ s = RT305X_ESW_VLANI_VID_S * (vlan % 2); ++ val = esw_r32(esw, RT305X_ESW_REG_VLANI(vlan / 2)); ++ val = (val >> s) & RT305X_ESW_VLANI_VID_M; ++ ++ return val; ++} ++ ++static void esw_set_vlan_id(struct rt305x_esw *esw, unsigned vlan, unsigned vid) ++{ ++ unsigned s; ++ ++ s = RT305X_ESW_VLANI_VID_S * (vlan % 2); ++ esw_rmw(esw, ++ RT305X_ESW_REG_VLANI(vlan / 2), ++ RT305X_ESW_VLANI_VID_M << s, ++ (vid & RT305X_ESW_VLANI_VID_M) << s); ++} ++ ++static unsigned esw_get_pvid(struct rt305x_esw *esw, unsigned port) ++{ ++ unsigned s, val; ++ ++ s = RT305X_ESW_PVIDC_PVID_S * (port % 2); ++ val = esw_r32(esw, RT305X_ESW_REG_PVIDC(port / 2)); ++ return (val >> s) & RT305X_ESW_PVIDC_PVID_M; ++} ++ ++static void esw_set_pvid(struct rt305x_esw *esw, unsigned port, unsigned pvid) ++{ ++ unsigned s; ++ ++ s = RT305X_ESW_PVIDC_PVID_S * (port % 2); ++ esw_rmw(esw, ++ RT305X_ESW_REG_PVIDC(port / 2), ++ RT305X_ESW_PVIDC_PVID_M << s, ++ (pvid & RT305X_ESW_PVIDC_PVID_M) << s); ++} ++ ++static unsigned esw_get_vmsc(struct rt305x_esw *esw, unsigned vlan) ++{ ++ unsigned s, val; ++ ++ s = RT305X_ESW_VMSC_MSC_S * (vlan % 4); ++ val = esw_r32(esw, RT305X_ESW_REG_VMSC(vlan / 4)); ++ val = (val >> s) & RT305X_ESW_VMSC_MSC_M; ++ ++ return val; ++} ++ ++static void esw_set_vmsc(struct rt305x_esw *esw, unsigned vlan, unsigned msc) ++{ ++ unsigned s; ++ ++ s = RT305X_ESW_VMSC_MSC_S * (vlan % 4); ++ esw_rmw(esw, ++ RT305X_ESW_REG_VMSC(vlan / 4), ++ RT305X_ESW_VMSC_MSC_M << s, ++ (msc & RT305X_ESW_VMSC_MSC_M) << s); ++} ++ ++static unsigned esw_get_port_disable(struct rt305x_esw *esw) ++{ ++ unsigned reg; ++ reg = esw_r32(esw, RT305X_ESW_REG_POC0); ++ return (reg >> RT305X_ESW_POC0_DIS_PORT_S) & ++ RT305X_ESW_POC0_DIS_PORT_M; ++} ++ ++static void esw_set_port_disable(struct rt305x_esw *esw, unsigned disable_mask) ++{ ++ unsigned old_mask; ++ unsigned enable_mask; ++ unsigned changed; ++ int i; ++ ++ old_mask = esw_get_port_disable(esw); ++ changed = old_mask ^ disable_mask; ++ enable_mask = old_mask & disable_mask; ++ ++ /* enable before writing to MII */ ++ esw_rmw(esw, RT305X_ESW_REG_POC0, ++ (RT305X_ESW_POC0_DIS_PORT_M << ++ RT305X_ESW_POC0_DIS_PORT_S), ++ enable_mask << RT305X_ESW_POC0_DIS_PORT_S); ++ ++ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) { ++ if (!(changed & (1 << i))) ++ continue; ++ if (disable_mask & (1 << i)) { ++ /* disable */ ++ rt305x_mii_write(esw, i, MII_BMCR, ++ BMCR_PDOWN); ++ } else { ++ /* enable */ ++ rt305x_mii_write(esw, i, MII_BMCR, ++ BMCR_FULLDPLX | ++ BMCR_ANENABLE | ++ BMCR_ANRESTART | ++ BMCR_SPEED100); ++ } ++ } ++ ++ /* disable after writing to MII */ ++ esw_rmw(esw, RT305X_ESW_REG_POC0, ++ (RT305X_ESW_POC0_DIS_PORT_M << ++ RT305X_ESW_POC0_DIS_PORT_S), ++ disable_mask << RT305X_ESW_POC0_DIS_PORT_S); ++} ++ ++static void esw_set_gsc(struct rt305x_esw *esw) ++{ ++ esw_rmw(esw, RT305X_ESW_REG_SGC, ++ RT305X_ESW_GSC_BC_STROM_MASK << RT305X_ESW_GSC_BC_STROM_SHIFT, ++ esw->bc_storm_protect << RT305X_ESW_GSC_BC_STROM_SHIFT); ++ esw_rmw(esw, RT305X_ESW_REG_SGC, ++ RT305X_ESW_GSC_LED_FREQ_MASK << RT305X_ESW_GSC_LED_FREQ_SHIFT, ++ esw->led_frequency << RT305X_ESW_GSC_LED_FREQ_SHIFT); ++} ++ ++static int esw_apply_config(struct switch_dev *dev); ++ ++static void esw_hw_init(struct rt305x_esw *esw) ++{ ++ int i; ++ u8 port_disable = 0; ++ u8 port_map = RT305X_ESW_PMAP_LLLLLL; ++ ++ /* vodoo from original driver */ ++ esw_w32(esw, 0xC8A07850, RT305X_ESW_REG_FCT0); ++ esw_w32(esw, 0x00000000, RT305X_ESW_REG_SGC2); ++ /* Port priority 1 for all ports, vlan enabled. */ ++ esw_w32(esw, 0x00005555 | ++ (RT305X_ESW_PORTS_ALL << RT305X_ESW_PFC1_EN_VLAN_S), ++ RT305X_ESW_REG_PFC1); ++ ++ /* Enable Back Pressure, and Flow Control */ ++ esw_w32(esw, ++ ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_BP_S) | ++ (RT305X_ESW_PORTS_ALL << RT305X_ESW_POC0_EN_FC_S)), ++ RT305X_ESW_REG_POC0); ++ ++ /* Enable Aging, and VLAN TAG removal */ ++ esw_w32(esw, ++ ((RT305X_ESW_PORTS_ALL << RT305X_ESW_POC2_ENAGING_S) | ++ (RT305X_ESW_PORTS_NOCPU << RT305X_ESW_POC2_UNTAG_EN_S)), ++ RT305X_ESW_REG_POC2); ++ ++ if (esw->reg_initval_fct2) ++ esw_w32(esw, esw->reg_initval_fct2, RT305X_ESW_REG_FCT2); ++ else ++ esw_w32(esw, esw->pdata->reg_initval_fct2, RT305X_ESW_REG_FCT2); ++ ++ /* ++ * 300s aging timer, max packet len 1536, broadcast storm prevention ++ * disabled, disable collision abort, mac xor48 hash, 10 packet back ++ * pressure jam, GMII disable was_transmit, back pressure disabled, ++ * 30ms led flash, unmatched IGMP as broadcast, rmc tb fault to all ++ * ports. ++ */ ++ esw_w32(esw, 0x0008a301, RT305X_ESW_REG_SGC); ++ ++ /* Setup SoC Port control register */ ++ esw_w32(esw, ++ (RT305X_ESW_SOCPC_CRC_PADDING | ++ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISUN2CPU_S) | ++ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISMC2CPU_S) | ++ (RT305X_ESW_PORTS_CPU << RT305X_ESW_SOCPC_DISBC2CPU_S)), ++ RT305X_ESW_REG_SOCPC); ++ ++ if (esw->reg_initval_fpa2) ++ esw_w32(esw, esw->reg_initval_fpa2, RT305X_ESW_REG_FPA2); ++ else ++ esw_w32(esw, esw->pdata->reg_initval_fpa2, RT305X_ESW_REG_FPA2); ++ esw_w32(esw, 0x00000000, RT305X_ESW_REG_FPA); ++ ++ /* Force Link/Activity on ports */ ++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P0LED); ++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P1LED); ++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P2LED); ++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P3LED); ++ esw_w32(esw, 0x00000005, RT305X_ESW_REG_P4LED); ++ ++ /* Copy disabled port configuration from bootloader setup */ ++ port_disable = esw_get_port_disable(esw); ++ for (i = 0; i < 6; i++) ++ esw->ports[i].disable = (port_disable & (1 << i)) != 0; ++ ++ if (soc_is_rt3352()) { ++ /* reset EPHY */ ++ u32 val = rt_sysc_r32(SYSC_REG_RESET_CTRL); ++ rt_sysc_w32(val | RT5350_RESET_EPHY, SYSC_REG_RESET_CTRL); ++ rt_sysc_w32(val, SYSC_REG_RESET_CTRL); ++ ++ rt305x_mii_write(esw, 0, 31, 0x8000); ++ for (i = 0; i < 5; i++) { ++ if (esw->ports[i].disable) { ++ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN); ++ } else { ++ rt305x_mii_write(esw, i, MII_BMCR, ++ BMCR_FULLDPLX | ++ BMCR_ANENABLE | ++ BMCR_SPEED100); ++ } ++ /* TX10 waveform coefficient LSB=0 disable PHY */ ++ rt305x_mii_write(esw, i, 26, 0x1601); ++ /* TX100/TX10 AD/DA current bias */ ++ rt305x_mii_write(esw, i, 29, 0x7016); ++ /* TX100 slew rate control */ ++ rt305x_mii_write(esw, i, 30, 0x0038); ++ } ++ ++ /* select global register */ ++ rt305x_mii_write(esw, 0, 31, 0x0); ++ /* enlarge agcsel threshold 3 and threshold 2 */ ++ rt305x_mii_write(esw, 0, 1, 0x4a40); ++ /* enlarge agcsel threshold 5 and threshold 4 */ ++ rt305x_mii_write(esw, 0, 2, 0x6254); ++ /* enlarge agcsel threshold */ ++ rt305x_mii_write(esw, 0, 3, 0xa17f); ++ rt305x_mii_write(esw, 0,12, 0x7eaa); ++ /* longer TP_IDL tail length */ ++ rt305x_mii_write(esw, 0, 14, 0x65); ++ /* increased squelch pulse count threshold. */ ++ rt305x_mii_write(esw, 0, 16, 0x0684); ++ /* set TX10 signal amplitude threshold to minimum */ ++ rt305x_mii_write(esw, 0, 17, 0x0fe0); ++ /* set squelch amplitude to higher threshold */ ++ rt305x_mii_write(esw, 0, 18, 0x40ba); ++ /* tune TP_IDL tail and head waveform, enable power down slew rate control */ ++ rt305x_mii_write(esw, 0, 22, 0x253f); ++ /* set PLL/Receive bias current are calibrated */ ++ rt305x_mii_write(esw, 0, 27, 0x2fda); ++ /* change PLL/Receive bias current to internal(RT3350) */ ++ rt305x_mii_write(esw, 0, 28, 0xc410); ++ /* change PLL bias current to internal(RT3052_MP3) */ ++ rt305x_mii_write(esw, 0, 29, 0x598b); ++ /* select local register */ ++ rt305x_mii_write(esw, 0, 31, 0x8000); ++ } else if (soc_is_rt5350()) { ++ /* reset EPHY */ ++ u32 val = rt_sysc_r32(SYSC_REG_RESET_CTRL); ++ rt_sysc_w32(val | RT5350_RESET_EPHY, SYSC_REG_RESET_CTRL); ++ rt_sysc_w32(val, SYSC_REG_RESET_CTRL); ++ ++ /* set the led polarity */ ++ esw_w32(esw, esw->reg_led_polarity & 0x1F, RT5350_EWS_REG_LED_POLARITY); ++ ++ /* local registers */ ++ rt305x_mii_write(esw, 0, 31, 0x8000); ++ for (i = 0; i < 5; i++) { ++ if (esw->ports[i].disable) { ++ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN); ++ } else { ++ rt305x_mii_write(esw, i, MII_BMCR, ++ BMCR_FULLDPLX | ++ BMCR_ANENABLE | ++ BMCR_SPEED100); ++ } ++ /* TX10 waveform coefficient LSB=0 disable PHY */ ++ rt305x_mii_write(esw, i, 26, 0x1601); ++ /* TX100/TX10 AD/DA current bias */ ++ rt305x_mii_write(esw, i, 29, 0x7015); ++ /* TX100 slew rate control */ ++ rt305x_mii_write(esw, i, 30, 0x0038); ++ } ++ ++ /* global registers */ ++ rt305x_mii_write(esw, 0, 31, 0x0); ++ /* enlarge agcsel threshold 3 and threshold 2 */ ++ rt305x_mii_write(esw, 0, 1, 0x4a40); ++ /* enlarge agcsel threshold 5 and threshold 4 */ ++ rt305x_mii_write(esw, 0, 2, 0x6254); ++ /* enlarge agcsel threshold 6 */ ++ rt305x_mii_write(esw, 0, 3, 0xa17f); ++ rt305x_mii_write(esw, 0, 12, 0x7eaa); ++ /* longer TP_IDL tail length */ ++ rt305x_mii_write(esw, 0, 14, 0x65); ++ /* increased squelch pulse count threshold. */ ++ rt305x_mii_write(esw, 0, 16, 0x0684); ++ /* set TX10 signal amplitude threshold to minimum */ ++ rt305x_mii_write(esw, 0, 17, 0x0fe0); ++ /* set squelch amplitude to higher threshold */ ++ rt305x_mii_write(esw, 0, 18, 0x40ba); ++ /* tune TP_IDL tail and head waveform, enable power down slew rate control */ ++ rt305x_mii_write(esw, 0, 22, 0x253f); ++ /* set PLL/Receive bias current are calibrated */ ++ rt305x_mii_write(esw, 0, 27, 0x2fda); ++ /* change PLL/Receive bias current to internal(RT3350) */ ++ rt305x_mii_write(esw, 0, 28, 0xc410); ++ /* change PLL bias current to internal(RT3052_MP3) */ ++ rt305x_mii_write(esw, 0, 29, 0x598b); ++ /* select local register */ ++ rt305x_mii_write(esw, 0, 31, 0x8000); ++ } else { ++ rt305x_mii_write(esw, 0, 31, 0x8000); ++ for (i = 0; i < 5; i++) { ++ if (esw->ports[i].disable) { ++ rt305x_mii_write(esw, i, MII_BMCR, BMCR_PDOWN); ++ } else { ++ rt305x_mii_write(esw, i, MII_BMCR, ++ BMCR_FULLDPLX | ++ BMCR_ANENABLE | ++ BMCR_SPEED100); ++ } ++ /* TX10 waveform coefficient */ ++ rt305x_mii_write(esw, i, 26, 0x1601); ++ /* TX100/TX10 AD/DA current bias */ ++ rt305x_mii_write(esw, i, 29, 0x7058); ++ /* TX100 slew rate control */ ++ rt305x_mii_write(esw, i, 30, 0x0018); ++ } ++ ++ /* PHY IOT */ ++ /* select global register */ ++ rt305x_mii_write(esw, 0, 31, 0x0); ++ /* tune TP_IDL tail and head waveform */ ++ rt305x_mii_write(esw, 0, 22, 0x052f); ++ /* set TX10 signal amplitude threshold to minimum */ ++ rt305x_mii_write(esw, 0, 17, 0x0fe0); ++ /* set squelch amplitude to higher threshold */ ++ rt305x_mii_write(esw, 0, 18, 0x40ba); ++ /* longer TP_IDL tail length */ ++ rt305x_mii_write(esw, 0, 14, 0x65); ++ /* select local register */ ++ rt305x_mii_write(esw, 0, 31, 0x8000); ++ } ++ ++ if (esw->port_map) ++ port_map = esw->port_map; ++ else ++ port_map = RT305X_ESW_PMAP_LLLLLL; ++ ++ /* ++ * Unused HW feature, but still nice to be consistent here... ++ * This is also exported to userspace ('lan' attribute) so it's ++ * conveniently usable to decide which ports go into the wan vlan by ++ * default. ++ */ ++ esw_rmw(esw, RT305X_ESW_REG_SGC2, ++ RT305X_ESW_SGC2_LAN_PMAP_M << RT305X_ESW_SGC2_LAN_PMAP_S, ++ port_map << RT305X_ESW_SGC2_LAN_PMAP_S); ++ ++ /* make the switch leds blink */ ++ for (i = 0; i < RT305X_ESW_NUM_LEDS; i++) ++ esw->ports[i].led = 0x05; ++ ++ /* Apply the empty config. */ ++ esw_apply_config(&esw->swdev); ++ ++ /* Only unmask the port change interrupt */ ++ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR); ++} ++ ++static irqreturn_t esw_interrupt(int irq, void *_esw) ++{ ++ struct rt305x_esw *esw = (struct rt305x_esw *) _esw; ++ u32 status; ++ ++ status = esw_r32(esw, RT305X_ESW_REG_ISR); ++ if (status & RT305X_ESW_PORT_ST_CHG) { ++ u32 link = esw_r32(esw, RT305X_ESW_REG_POA); ++ link >>= RT305X_ESW_POA_LINK_SHIFT; ++ link &= RT305X_ESW_POA_LINK_MASK; ++ dev_info(esw->dev, "link changed 0x%02X\n", link); ++ } ++ esw_w32(esw, status, RT305X_ESW_REG_ISR); ++ ++ return IRQ_HANDLED; ++} ++ ++static int esw_apply_config(struct switch_dev *dev) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ int i; ++ u8 disable = 0; ++ u8 doubletag = 0; ++ u8 en_vlan = 0; ++ u8 untag = 0; ++ ++ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) { ++ u32 vid, vmsc; ++ if (esw->global_vlan_enable) { ++ vid = esw->vlans[i].vid; ++ vmsc = esw->vlans[i].ports; ++ } else { ++ vid = RT305X_ESW_VLAN_NONE; ++ vmsc = RT305X_ESW_PORTS_NONE; ++ } ++ esw_set_vlan_id(esw, i, vid); ++ esw_set_vmsc(esw, i, vmsc); ++ } ++ ++ for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) { ++ u32 pvid; ++ disable |= esw->ports[i].disable << i; ++ if (esw->global_vlan_enable) { ++ doubletag |= esw->ports[i].doubletag << i; ++ en_vlan |= 1 << i; ++ untag |= esw->ports[i].untag << i; ++ pvid = esw->ports[i].pvid; ++ } else { ++ int x = esw->alt_vlan_disable ? 0 : 1; ++ doubletag |= x << i; ++ en_vlan |= x << i; ++ untag |= x << i; ++ pvid = 0; ++ } ++ esw_set_pvid(esw, i, pvid); ++ if (i < RT305X_ESW_NUM_LEDS) ++ esw_w32(esw, esw->ports[i].led, ++ RT305X_ESW_REG_P0LED + 4*i); ++ } ++ ++ esw_set_gsc(esw); ++ esw_set_port_disable(esw, disable); ++ esw_rmw(esw, RT305X_ESW_REG_SGC2, ++ (RT305X_ESW_SGC2_DOUBLE_TAG_M << ++ RT305X_ESW_SGC2_DOUBLE_TAG_S), ++ doubletag << RT305X_ESW_SGC2_DOUBLE_TAG_S); ++ esw_rmw(esw, RT305X_ESW_REG_PFC1, ++ RT305X_ESW_PFC1_EN_VLAN_M << RT305X_ESW_PFC1_EN_VLAN_S, ++ en_vlan << RT305X_ESW_PFC1_EN_VLAN_S); ++ esw_rmw(esw, RT305X_ESW_REG_POC2, ++ RT305X_ESW_POC2_UNTAG_EN_M << RT305X_ESW_POC2_UNTAG_EN_S, ++ untag << RT305X_ESW_POC2_UNTAG_EN_S); ++ ++ if (!esw->global_vlan_enable) { ++ /* ++ * Still need to put all ports into vlan 0 or they'll be ++ * isolated. ++ * NOTE: vlan 0 is special, no vlan tag is prepended ++ */ ++ esw_set_vlan_id(esw, 0, 0); ++ esw_set_vmsc(esw, 0, RT305X_ESW_PORTS_ALL); ++ } ++ ++ return 0; ++} ++ ++static int esw_reset_switch(struct switch_dev *dev) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ ++ esw->global_vlan_enable = 0; ++ memset(esw->ports, 0, sizeof(esw->ports)); ++ memset(esw->vlans, 0, sizeof(esw->vlans)); ++ esw_hw_init(esw); ++ ++ return 0; ++} ++ ++static int esw_get_vlan_enable(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ ++ val->value.i = esw->global_vlan_enable; ++ ++ return 0; ++} ++ ++static int esw_set_vlan_enable(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ ++ esw->global_vlan_enable = val->value.i != 0; ++ ++ return 0; ++} ++ ++static int esw_get_alt_vlan_disable(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ ++ val->value.i = esw->alt_vlan_disable; ++ ++ return 0; ++} ++ ++static int esw_set_alt_vlan_disable(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ ++ esw->alt_vlan_disable = val->value.i != 0; ++ ++ return 0; ++} ++ ++static int ++rt305x_esw_set_bc_status(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ ++ esw->bc_storm_protect = val->value.i & RT305X_ESW_GSC_BC_STROM_MASK; ++ ++ return 0; ++} ++ ++static int ++rt305x_esw_get_bc_status(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ ++ val->value.i = esw->bc_storm_protect; ++ ++ return 0; ++} ++ ++static int ++rt305x_esw_set_led_freq(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ ++ esw->led_frequency = val->value.i & RT305X_ESW_GSC_LED_FREQ_MASK; ++ ++ return 0; ++} ++ ++static int ++rt305x_esw_get_led_freq(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ ++ val->value.i = esw->led_frequency; ++ ++ return 0; ++} ++ ++static int esw_get_port_link(struct switch_dev *dev, ++ int port, ++ struct switch_port_link *link) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ u32 speed, poa; ++ ++ if (port < 0 || port >= RT305X_ESW_NUM_PORTS) ++ return -EINVAL; ++ ++ poa = esw_r32(esw, RT305X_ESW_REG_POA) >> port; ++ ++ link->link = (poa >> RT305X_ESW_LINK_S) & 1; ++ link->duplex = (poa >> RT305X_ESW_DUPLEX_S) & 1; ++ if (port < RT305X_ESW_NUM_LEDS) { ++ speed = (poa >> RT305X_ESW_SPD_S) & 1; ++ } else { ++ if (port == RT305X_ESW_NUM_PORTS - 1) ++ poa >>= 1; ++ speed = (poa >> RT305X_ESW_SPD_S) & 3; ++ } ++ switch (speed) { ++ case 0: ++ link->speed = SWITCH_PORT_SPEED_10; ++ break; ++ case 1: ++ link->speed = SWITCH_PORT_SPEED_100; ++ break; ++ case 2: ++ case 3: /* forced gige speed can be 2 or 3 */ ++ link->speed = SWITCH_PORT_SPEED_1000; ++ break; ++ default: ++ link->speed = SWITCH_PORT_SPEED_UNKNOWN; ++ break; ++ } ++ ++ return 0; ++} ++ ++static int esw_get_port_bool(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ int idx = val->port_vlan; ++ u32 x, reg, shift; ++ ++ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS) ++ return -EINVAL; ++ ++ switch (attr->id) { ++ case RT305X_ESW_ATTR_PORT_DISABLE: ++ reg = RT305X_ESW_REG_POC0; ++ shift = RT305X_ESW_POC0_DIS_PORT_S; ++ break; ++ case RT305X_ESW_ATTR_PORT_DOUBLETAG: ++ reg = RT305X_ESW_REG_SGC2; ++ shift = RT305X_ESW_SGC2_DOUBLE_TAG_S; ++ break; ++ case RT305X_ESW_ATTR_PORT_UNTAG: ++ reg = RT305X_ESW_REG_POC2; ++ shift = RT305X_ESW_POC2_UNTAG_EN_S; ++ break; ++ case RT305X_ESW_ATTR_PORT_LAN: ++ reg = RT305X_ESW_REG_SGC2; ++ shift = RT305X_ESW_SGC2_LAN_PMAP_S; ++ if (idx >= RT305X_ESW_NUM_LANWAN) ++ return -EINVAL; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ x = esw_r32(esw, reg); ++ val->value.i = (x >> (idx + shift)) & 1; ++ ++ return 0; ++} ++ ++static int esw_set_port_bool(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ int idx = val->port_vlan; ++ ++ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS || ++ val->value.i < 0 || val->value.i > 1) ++ return -EINVAL; ++ ++ switch (attr->id) { ++ case RT305X_ESW_ATTR_PORT_DISABLE: ++ esw->ports[idx].disable = val->value.i; ++ break; ++ case RT305X_ESW_ATTR_PORT_DOUBLETAG: ++ esw->ports[idx].doubletag = val->value.i; ++ break; ++ case RT305X_ESW_ATTR_PORT_UNTAG: ++ esw->ports[idx].untag = val->value.i; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static int esw_get_port_recv_badgood(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ int idx = val->port_vlan; ++ int shift = attr->id == RT305X_ESW_ATTR_PORT_RECV_GOOD ? 0 : 16; ++ u32 reg; ++ ++ if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN) ++ return -EINVAL; ++ reg = esw_r32(esw, RT305X_ESW_REG_PXPC(idx)); ++ val->value.i = (reg >> shift) & 0xffff; ++ ++ return 0; ++} ++ ++static int ++esw_get_port_tr_badgood(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ ++ int idx = val->port_vlan; ++ int shift = attr->id == RT5350_ESW_ATTR_PORT_TR_GOOD ? 0 : 16; ++ u32 reg; ++ ++ if (!soc_is_rt5350()) ++ return -EINVAL; ++ ++ if (idx < 0 || idx >= RT305X_ESW_NUM_LANWAN) ++ return -EINVAL; ++ ++ reg = esw_r32(esw, RT5350_ESW_REG_PXTPC(idx)); ++ val->value.i = (reg >> shift) & 0xffff; ++ ++ return 0; ++} ++ ++static int esw_get_port_led(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ int idx = val->port_vlan; ++ ++ if (idx < 0 || idx >= RT305X_ESW_NUM_PORTS || ++ idx >= RT305X_ESW_NUM_LEDS) ++ return -EINVAL; ++ ++ val->value.i = esw_r32(esw, RT305X_ESW_REG_P0LED + 4*idx); ++ ++ return 0; ++} ++ ++static int esw_set_port_led(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ int idx = val->port_vlan; ++ ++ if (idx < 0 || idx >= RT305X_ESW_NUM_LEDS) ++ return -EINVAL; ++ ++ esw->ports[idx].led = val->value.i; ++ ++ return 0; ++} ++ ++static int esw_get_port_pvid(struct switch_dev *dev, int port, int *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ ++ if (port >= RT305X_ESW_NUM_PORTS) ++ return -EINVAL; ++ ++ *val = esw_get_pvid(esw, port); ++ ++ return 0; ++} ++ ++static int esw_set_port_pvid(struct switch_dev *dev, int port, int val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ ++ if (port >= RT305X_ESW_NUM_PORTS) ++ return -EINVAL; ++ ++ esw->ports[port].pvid = val; ++ ++ return 0; ++} ++ ++static int esw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ u32 vmsc, poc2; ++ int vlan_idx = -1; ++ int i; ++ ++ val->len = 0; ++ ++ if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS) ++ return -EINVAL; ++ ++ /* valid vlan? */ ++ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) { ++ if (esw_get_vlan_id(esw, i) == val->port_vlan && ++ esw_get_vmsc(esw, i) != RT305X_ESW_PORTS_NONE) { ++ vlan_idx = i; ++ break; ++ } ++ } ++ ++ if (vlan_idx == -1) ++ return -EINVAL; ++ ++ vmsc = esw_get_vmsc(esw, vlan_idx); ++ poc2 = esw_r32(esw, RT305X_ESW_REG_POC2); ++ ++ for (i = 0; i < RT305X_ESW_NUM_PORTS; i++) { ++ struct switch_port *p; ++ int port_mask = 1 << i; ++ ++ if (!(vmsc & port_mask)) ++ continue; ++ ++ p = &val->value.ports[val->len++]; ++ p->id = i; ++ if (poc2 & (port_mask << RT305X_ESW_POC2_UNTAG_EN_S)) ++ p->flags = 0; ++ else ++ p->flags = 1 << SWITCH_PORT_FLAG_TAGGED; ++ } ++ ++ return 0; ++} ++ ++static int esw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val) ++{ ++ struct rt305x_esw *esw = container_of(dev, struct rt305x_esw, swdev); ++ int ports; ++ int vlan_idx = -1; ++ int i; ++ ++ if (val->port_vlan < 0 || val->port_vlan >= RT305X_ESW_NUM_VIDS || ++ val->len > RT305X_ESW_NUM_PORTS) ++ return -EINVAL; ++ ++ /* one of the already defined vlans? */ ++ for (i = 0; i < RT305X_ESW_NUM_VLANS; i++) { ++ if (esw->vlans[i].vid == val->port_vlan && ++ esw->vlans[i].ports != RT305X_ESW_PORTS_NONE) { ++ vlan_idx = i; ++ break; ++ } ++ } ++ ++ /* select a free slot */ ++ for (i = 0; vlan_idx == -1 && i < RT305X_ESW_NUM_VLANS; i++) { ++ if (esw->vlans[i].ports == RT305X_ESW_PORTS_NONE) ++ vlan_idx = i; ++ } ++ ++ /* bail if all slots are in use */ ++ if (vlan_idx == -1) ++ return -EINVAL; ++ ++ ports = RT305X_ESW_PORTS_NONE; ++ for (i = 0; i < val->len; i++) { ++ struct switch_port *p = &val->value.ports[i]; ++ int port_mask = 1 << p->id; ++ bool untagged = !(p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)); ++ ++ if (p->id >= RT305X_ESW_NUM_PORTS) ++ return -EINVAL; ++ ++ ports |= port_mask; ++ esw->ports[p->id].untag = untagged; ++ } ++ esw->vlans[vlan_idx].ports = ports; ++ if (ports == RT305X_ESW_PORTS_NONE) ++ esw->vlans[vlan_idx].vid = RT305X_ESW_VLAN_NONE; ++ else ++ esw->vlans[vlan_idx].vid = val->port_vlan; ++ ++ return 0; ++} ++ ++static const struct switch_attr esw_global[] = { ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "enable_vlan", ++ .description = "VLAN mode (1:enabled)", ++ .max = 1, ++ .id = RT305X_ESW_ATTR_ENABLE_VLAN, ++ .get = esw_get_vlan_enable, ++ .set = esw_set_vlan_enable, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "alternate_vlan_disable", ++ .description = "Use en_vlan instead of doubletag to disable" ++ " VLAN mode", ++ .max = 1, ++ .id = RT305X_ESW_ATTR_ALT_VLAN_DISABLE, ++ .get = esw_get_alt_vlan_disable, ++ .set = esw_set_alt_vlan_disable, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "bc_storm_protect", ++ .description = "Global broadcast storm protection (0:Disable, 1:64 blocks, 2:96 blocks, 3:128 blocks)", ++ .max = 3, ++ .id = RT305X_ESW_ATTR_BC_STATUS, ++ .get = rt305x_esw_get_bc_status, ++ .set = rt305x_esw_set_bc_status, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "led_frequency", ++ .description = "LED Flash frequency (0:30mS, 1:60mS, 2:240mS, 3:480mS)", ++ .max = 3, ++ .id = RT305X_ESW_ATTR_LED_FREQ, ++ .get = rt305x_esw_get_led_freq, ++ .set = rt305x_esw_set_led_freq, ++ } ++}; ++ ++static const struct switch_attr esw_port[] = { ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "disable", ++ .description = "Port state (1:disabled)", ++ .max = 1, ++ .id = RT305X_ESW_ATTR_PORT_DISABLE, ++ .get = esw_get_port_bool, ++ .set = esw_set_port_bool, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "doubletag", ++ .description = "Double tagging for incoming vlan packets " ++ "(1:enabled)", ++ .max = 1, ++ .id = RT305X_ESW_ATTR_PORT_DOUBLETAG, ++ .get = esw_get_port_bool, ++ .set = esw_set_port_bool, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "untag", ++ .description = "Untag (1:strip outgoing vlan tag)", ++ .max = 1, ++ .id = RT305X_ESW_ATTR_PORT_UNTAG, ++ .get = esw_get_port_bool, ++ .set = esw_set_port_bool, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "led", ++ .description = "LED mode (0:link, 1:100m, 2:duplex, 3:activity," ++ " 4:collision, 5:linkact, 6:duplcoll, 7:10mact," ++ " 8:100mact, 10:blink, 11:off, 12:on)", ++ .max = 15, ++ .id = RT305X_ESW_ATTR_PORT_LED, ++ .get = esw_get_port_led, ++ .set = esw_set_port_led, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "lan", ++ .description = "HW port group (0:wan, 1:lan)", ++ .max = 1, ++ .id = RT305X_ESW_ATTR_PORT_LAN, ++ .get = esw_get_port_bool, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "recv_bad", ++ .description = "Receive bad packet counter", ++ .id = RT305X_ESW_ATTR_PORT_RECV_BAD, ++ .get = esw_get_port_recv_badgood, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "recv_good", ++ .description = "Receive good packet counter", ++ .id = RT305X_ESW_ATTR_PORT_RECV_GOOD, ++ .get = esw_get_port_recv_badgood, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "tr_bad", ++ ++ .description = "Transmit bad packet counter. rt5350 only", ++ .id = RT5350_ESW_ATTR_PORT_TR_BAD, ++ .get = esw_get_port_tr_badgood, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "tr_good", ++ ++ .description = "Transmit good packet counter. rt5350 only", ++ .id = RT5350_ESW_ATTR_PORT_TR_GOOD, ++ .get = esw_get_port_tr_badgood, ++ }, ++}; ++ ++static const struct switch_attr esw_vlan[] = { ++}; ++ ++static const struct switch_dev_ops esw_ops = { ++ .attr_global = { ++ .attr = esw_global, ++ .n_attr = ARRAY_SIZE(esw_global), ++ }, ++ .attr_port = { ++ .attr = esw_port, ++ .n_attr = ARRAY_SIZE(esw_port), ++ }, ++ .attr_vlan = { ++ .attr = esw_vlan, ++ .n_attr = ARRAY_SIZE(esw_vlan), ++ }, ++ .get_vlan_ports = esw_get_vlan_ports, ++ .set_vlan_ports = esw_set_vlan_ports, ++ .get_port_pvid = esw_get_port_pvid, ++ .set_port_pvid = esw_set_port_pvid, ++ .get_port_link = esw_get_port_link, ++ .apply_config = esw_apply_config, ++ .reset_switch = esw_reset_switch, ++}; ++ ++static struct rt305x_esw_platform_data rt3050_esw_data = { ++ /* All ports are LAN ports. */ ++ .vlan_config = RT305X_ESW_VLAN_CONFIG_NONE, ++ .reg_initval_fct2 = 0x00d6500c, ++ /* ++ * ext phy base addr 31, enable port 5 polling, rx/tx clock skew 1, ++ * turbo mii off, rgmi 3.3v off ++ * port5: disabled ++ * port6: enabled, gige, full-duplex, rx/tx-flow-control ++ */ ++ .reg_initval_fpa2 = 0x3f502b28, ++}; ++ ++static const struct of_device_id ralink_esw_match[] = { ++ { .compatible = "ralink,rt3050-esw", .data = &rt3050_esw_data }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ralink_esw_match); ++ ++static int esw_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ const struct rt305x_esw_platform_data *pdata; ++ const __be32 *port_map, *reg_init; ++ struct rt305x_esw *esw; ++ struct switch_dev *swdev; ++ struct resource *res, *irq; ++ int err; ++ ++ pdata = pdev->dev.platform_data; ++ if (!pdata) { ++ const struct of_device_id *match; ++ match = of_match_device(ralink_esw_match, &pdev->dev); ++ if (match) ++ pdata = (struct rt305x_esw_platform_data *) match->data; ++ } ++ if (!pdata) ++ return -EINVAL; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_err(&pdev->dev, "no memory resource found\n"); ++ return -ENOMEM; ++ } ++ ++ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); ++ if (!irq) { ++ dev_err(&pdev->dev, "no irq resource found\n"); ++ return -ENOMEM; ++ } ++ ++ esw = kzalloc(sizeof(struct rt305x_esw), GFP_KERNEL); ++ if (!esw) { ++ dev_err(&pdev->dev, "no memory for private data\n"); ++ return -ENOMEM; ++ } ++ ++ esw->dev = &pdev->dev; ++ esw->irq = irq->start; ++ esw->base = ioremap(res->start, resource_size(res)); ++ if (!esw->base) { ++ dev_err(&pdev->dev, "ioremap failed\n"); ++ err = -ENOMEM; ++ goto free_esw; ++ } ++ ++ port_map = of_get_property(np, "ralink,portmap", NULL); ++ if (port_map) ++ esw->port_map = be32_to_cpu(*port_map); ++ ++ reg_init = of_get_property(np, "ralink,fct2", NULL); ++ if (reg_init) ++ esw->reg_initval_fct2 = be32_to_cpu(*reg_init); ++ ++ reg_init = of_get_property(np, "ralink,fpa2", NULL); ++ if (reg_init) ++ esw->reg_initval_fpa2 = be32_to_cpu(*reg_init); ++ ++ reg_init = of_get_property(np, "ralink,led_polarity", NULL); ++ if (reg_init) ++ esw->reg_led_polarity = be32_to_cpu(*reg_init); ++ ++ swdev = &esw->swdev; ++ swdev->of_node = pdev->dev.of_node; ++ swdev->name = "rt305x-esw"; ++ swdev->alias = "rt305x"; ++ swdev->cpu_port = RT305X_ESW_PORT6; ++ swdev->ports = RT305X_ESW_NUM_PORTS; ++ swdev->vlans = RT305X_ESW_NUM_VIDS; ++ swdev->ops = &esw_ops; ++ ++ err = register_switch(swdev, NULL); ++ if (err < 0) { ++ dev_err(&pdev->dev, "register_switch failed\n"); ++ goto unmap_base; ++ } ++ ++ platform_set_drvdata(pdev, esw); ++ ++ esw->pdata = pdata; ++ spin_lock_init(&esw->reg_rw_lock); ++ ++ esw_hw_init(esw); ++ ++ esw_w32(esw, RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_ISR); ++ esw_w32(esw, ~RT305X_ESW_PORT_ST_CHG, RT305X_ESW_REG_IMR); ++ request_irq(esw->irq, esw_interrupt, 0, "esw", esw); ++ ++ return 0; ++ ++unmap_base: ++ iounmap(esw->base); ++free_esw: ++ kfree(esw); ++ return err; ++} ++ ++static int esw_remove(struct platform_device *pdev) ++{ ++ struct rt305x_esw *esw; ++ ++ esw = platform_get_drvdata(pdev); ++ if (esw) { ++ unregister_switch(&esw->swdev); ++ platform_set_drvdata(pdev, NULL); ++ iounmap(esw->base); ++ kfree(esw); ++ } ++ ++ return 0; ++} ++ ++static struct platform_driver esw_driver = { ++ .probe = esw_probe, ++ .remove = esw_remove, ++ .driver = { ++ .name = "rt305x-esw", ++ .owner = THIS_MODULE, ++ .of_match_table = ralink_esw_match, ++ }, ++}; ++ ++int __init rtesw_init(void) ++{ ++ return platform_driver_register(&esw_driver); ++} ++ ++void rtesw_exit(void) ++{ ++ platform_driver_unregister(&esw_driver); ++} +diff --git a/drivers/net/ethernet/ralink/esw_rt3052.h b/drivers/net/ethernet/ralink/esw_rt3052.h +new file mode 100644 +index 0000000..2ced3dff +--- /dev/null ++++ b/drivers/net/ethernet/ralink/esw_rt3052.h +@@ -0,0 +1,32 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#ifndef _RALINK_ESW_RT3052_H__ ++#define _RALINK_ESW_RT3052_H__ ++ ++#ifdef CONFIG_NET_RALINK_ESW_RT3052 ++ ++int __init rtesw_init(void); ++void rtesw_exit(void); ++ ++#else ++ ++static inline int __init rtesw_init(void) { return 0; } ++static inline void rtesw_exit(void) { } ++ ++#endif ++#endif +diff --git a/drivers/net/ethernet/ralink/gsw_mt7620a.c b/drivers/net/ethernet/ralink/gsw_mt7620a.c +new file mode 100644 +index 0000000..70f81e3 +--- /dev/null ++++ b/drivers/net/ethernet/ralink/gsw_mt7620a.c +@@ -0,0 +1,566 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/dma-mapping.h> ++#include <linux/init.h> ++#include <linux/skbuff.h> ++#include <linux/etherdevice.h> ++#include <linux/ethtool.h> ++#include <linux/platform_device.h> ++#include <linux/of_device.h> ++#include <linux/clk.h> ++#include <linux/of_net.h> ++#include <linux/of_mdio.h> ++#include <linux/of_irq.h> ++#include <linux/of_address.h> ++#include <linux/switch.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++ ++#include "ralink_soc_eth.h" ++ ++#include <linux/ioport.h> ++#include <linux/switch.h> ++#include <linux/mii.h> ++ ++#include <ralink_regs.h> ++#include <asm/mach-ralink/mt7620.h> ++ ++#include "ralink_soc_eth.h" ++#include "gsw_mt7620a.h" ++#include "mt7530.h" ++#include "mdio.h" ++ ++#define GSW_REG_PHY_TIMEOUT (5 * HZ) ++ ++#define MT7620A_GSW_REG_PIAC 0x7004 ++ ++#define GSW_NUM_VLANS 16 ++#define GSW_NUM_VIDS 4096 ++#define GSW_NUM_PORTS 7 ++#define GSW_PORT6 6 ++ ++#define GSW_MDIO_ACCESS BIT(31) ++#define GSW_MDIO_READ BIT(19) ++#define GSW_MDIO_WRITE BIT(18) ++#define GSW_MDIO_START BIT(16) ++#define GSW_MDIO_ADDR_SHIFT 20 ++#define GSW_MDIO_REG_SHIFT 25 ++ ++#define GSW_REG_PORT_PMCR(x) (0x3000 + (x * 0x100)) ++#define GSW_REG_PORT_STATUS(x) (0x3008 + (x * 0x100)) ++#define GSW_REG_SMACCR0 0x3fE4 ++#define GSW_REG_SMACCR1 0x3fE8 ++#define GSW_REG_CKGCR 0x3ff0 ++ ++#define GSW_REG_IMR 0x7008 ++#define GSW_REG_ISR 0x700c ++ ++#define SYSC_REG_CFG1 0x14 ++ ++#define PORT_IRQ_ST_CHG 0x7f ++ ++#define SYSCFG1 0x14 ++ ++#define ESW_PHY_POLLING 0x7000 ++ ++#define PMCR_IPG BIT(18) ++#define PMCR_MAC_MODE BIT(16) ++#define PMCR_FORCE BIT(15) ++#define PMCR_TX_EN BIT(14) ++#define PMCR_RX_EN BIT(13) ++#define PMCR_BACKOFF BIT(9) ++#define PMCR_BACKPRES BIT(8) ++#define PMCR_RX_FC BIT(5) ++#define PMCR_TX_FC BIT(4) ++#define PMCR_SPEED(_x) (_x << 2) ++#define PMCR_DUPLEX BIT(1) ++#define PMCR_LINK BIT(0) ++ ++#define PHY_AN_EN BIT(31) ++#define PHY_PRE_EN BIT(30) ++#define PMY_MDC_CONF(_x) ((_x & 0x3f) << 24) ++ ++enum { ++ /* Global attributes. */ ++ GSW_ATTR_ENABLE_VLAN, ++ /* Port attributes. */ ++ GSW_ATTR_PORT_UNTAG, ++}; ++ ++enum { ++ PORT4_EPHY = 0, ++ PORT4_EXT, ++}; ++ ++struct mt7620_gsw { ++ struct device *dev; ++ void __iomem *base; ++ int irq; ++ int port4; ++ long unsigned int autopoll; ++}; ++ ++static inline void gsw_w32(struct mt7620_gsw *gsw, u32 val, unsigned reg) ++{ ++ iowrite32(val, gsw->base + reg); ++} ++ ++static inline u32 gsw_r32(struct mt7620_gsw *gsw, unsigned reg) ++{ ++ return ioread32(gsw->base + reg); ++} ++ ++static int mt7620_mii_busy_wait(struct mt7620_gsw *gsw) ++{ ++ unsigned long t_start = jiffies; ++ ++ while (1) { ++ if (!(gsw_r32(gsw, MT7620A_GSW_REG_PIAC) & GSW_MDIO_ACCESS)) ++ return 0; ++ if (time_after(jiffies, t_start + GSW_REG_PHY_TIMEOUT)) { ++ break; ++ } ++ } ++ ++ printk(KERN_ERR "mdio: MDIO timeout\n"); ++ return -1; ++} ++ ++static u32 _mt7620_mii_write(struct mt7620_gsw *gsw, u32 phy_addr, u32 phy_register, ++ u32 write_data) ++{ ++ if (mt7620_mii_busy_wait(gsw)) ++ return -1; ++ ++ write_data &= 0xffff; ++ ++ gsw_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_WRITE | ++ (phy_register << GSW_MDIO_REG_SHIFT) | ++ (phy_addr << GSW_MDIO_ADDR_SHIFT) | write_data, ++ MT7620A_GSW_REG_PIAC); ++ ++ if (mt7620_mii_busy_wait(gsw)) ++ return -1; ++ ++ return 0; ++} ++ ++static u32 _mt7620_mii_read(struct mt7620_gsw *gsw, int phy_addr, int phy_reg) ++{ ++ u32 d; ++ ++ if (mt7620_mii_busy_wait(gsw)) ++ return 0xffff; ++ ++ gsw_w32(gsw, GSW_MDIO_ACCESS | GSW_MDIO_START | GSW_MDIO_READ | ++ (phy_reg << GSW_MDIO_REG_SHIFT) | ++ (phy_addr << GSW_MDIO_ADDR_SHIFT), ++ MT7620A_GSW_REG_PIAC); ++ ++ if (mt7620_mii_busy_wait(gsw)) ++ return 0xffff; ++ ++ d = gsw_r32(gsw, MT7620A_GSW_REG_PIAC) & 0xffff; ++ ++ return d; ++} ++ ++int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val) ++{ ++ struct fe_priv *priv = bus->priv; ++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv; ++ ++ return _mt7620_mii_write(gsw, phy_addr, phy_reg, val); ++} ++ ++int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg) ++{ ++ struct fe_priv *priv = bus->priv; ++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv; ++ ++ return _mt7620_mii_read(gsw, phy_addr, phy_reg); ++} ++ ++static unsigned char *fe_speed_str(int speed) ++{ ++ switch (speed) { ++ case 2: ++ case SPEED_1000: ++ return "1000"; ++ case 1: ++ case SPEED_100: ++ return "100"; ++ case 0: ++ case SPEED_10: ++ return "10"; ++ } ++ ++ return "? "; ++} ++ ++int mt7620a_has_carrier(struct fe_priv *priv) ++{ ++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv; ++ int i; ++ ++ for (i = 0; i < GSW_PORT6; i++) ++ if (gsw_r32(gsw, GSW_REG_PORT_STATUS(i)) & 0x1) ++ return 1; ++ return 0; ++} ++ ++static void mt7620a_handle_carrier(struct fe_priv *priv) ++{ ++ if (!priv->phy) ++ return; ++ ++ if (mt7620a_has_carrier(priv)) ++ netif_carrier_on(priv->netdev); ++ else ++ netif_carrier_off(priv->netdev); ++} ++ ++void mt7620_mdio_link_adjust(struct fe_priv *priv, int port) ++{ ++ if (priv->link[port]) ++ netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n", ++ port, fe_speed_str(priv->phy->speed[port]), ++ (DUPLEX_FULL == priv->phy->duplex[port]) ? "Full" : "Half"); ++ else ++ netdev_info(priv->netdev, "port %d link down\n", port); ++ mt7620a_handle_carrier(priv); ++} ++ ++static irqreturn_t gsw_interrupt(int irq, void *_priv) ++{ ++ struct fe_priv *priv = (struct fe_priv *) _priv; ++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv; ++ u32 status; ++ int i, max = (gsw->port4 == PORT4_EPHY) ? (4) : (3); ++ ++ status = gsw_r32(gsw, GSW_REG_ISR); ++ if (status & PORT_IRQ_ST_CHG) ++ for (i = 0; i <= max; i++) { ++ u32 status = gsw_r32(gsw, GSW_REG_PORT_STATUS(i)); ++ int link = status & 0x1; ++ ++ if (link != priv->link[i]) { ++ if (link) ++ netdev_info(priv->netdev, "port %d link up (%sMbps/%s duplex)\n", ++ i, fe_speed_str((status >> 2) & 3), ++ (status & 0x2) ? "Full" : "Half"); ++ else ++ netdev_info(priv->netdev, "port %d link down\n", i); ++ } ++ ++ priv->link[i] = link; ++ } ++ mt7620a_handle_carrier(priv); ++ ++ gsw_w32(gsw, status, GSW_REG_ISR); ++ ++ return IRQ_HANDLED; ++} ++ ++static int mt7620_is_bga(void) ++{ ++ u32 bga = rt_sysc_r32(0x0c); ++ ++ return (bga >> 16) & 1; ++} ++ ++static void gsw_auto_poll(struct mt7620_gsw *gsw) ++{ ++ int phy; ++ int lsb = -1, msb = 0; ++ ++ for_each_set_bit(phy, &gsw->autopoll, 32) { ++ if (lsb < 0) ++ lsb = phy; ++ msb = phy; ++ } ++ ++ gsw_w32(gsw, PHY_AN_EN | PHY_PRE_EN | PMY_MDC_CONF(5) | (msb << 8) | lsb, ESW_PHY_POLLING); ++} ++ ++void mt7620_port_init(struct fe_priv *priv, struct device_node *np) ++{ ++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv; ++ const __be32 *_id = of_get_property(np, "reg", NULL); ++ int phy_mode, size, id; ++ int shift = 12; ++ u32 val, mask = 0; ++ int min = (gsw->port4 == PORT4_EPHY) ? (5) : (4); ++ ++ if (!_id || (be32_to_cpu(*_id) < min) || (be32_to_cpu(*_id) > 5)) { ++ if (_id) ++ pr_err("%s: invalid port id %d\n", np->name, be32_to_cpu(*_id)); ++ else ++ pr_err("%s: invalid port id\n", np->name); ++ return; ++ } ++ ++ id = be32_to_cpu(*_id); ++ ++ if (id == 4) ++ shift = 14; ++ ++ priv->phy->phy_fixed[id] = of_get_property(np, "ralink,fixed-link", &size); ++ if (priv->phy->phy_fixed[id] && (size != (4 * sizeof(*priv->phy->phy_fixed[id])))) { ++ pr_err("%s: invalid fixed link property\n", np->name); ++ priv->phy->phy_fixed[id] = NULL; ++ return; ++ } ++ ++ phy_mode = of_get_phy_mode(np); ++ switch (phy_mode) { ++ case PHY_INTERFACE_MODE_RGMII: ++ mask = 0; ++ break; ++ case PHY_INTERFACE_MODE_MII: ++ mask = 1; ++ break; ++ case PHY_INTERFACE_MODE_RMII: ++ mask = 2; ++ break; ++ default: ++ dev_err(priv->device, "port %d - invalid phy mode\n", id); ++ return; ++ } ++ ++ priv->phy->phy_node[id] = of_parse_phandle(np, "phy-handle", 0); ++ if (!priv->phy->phy_node[id] && !priv->phy->phy_fixed[id]) ++ return; ++ ++ val = rt_sysc_r32(SYSCFG1); ++ val &= ~(3 << shift); ++ val |= mask << shift; ++ rt_sysc_w32(val, SYSCFG1); ++ ++ if (priv->phy->phy_fixed[id]) { ++ const __be32 *link = priv->phy->phy_fixed[id]; ++ int tx_fc, rx_fc; ++ u32 val = 0; ++ ++ priv->phy->speed[id] = be32_to_cpup(link++); ++ tx_fc = be32_to_cpup(link++); ++ rx_fc = be32_to_cpup(link++); ++ priv->phy->duplex[id] = be32_to_cpup(link++); ++ priv->link[id] = 1; ++ ++ switch (priv->phy->speed[id]) { ++ case SPEED_10: ++ val = 0; ++ break; ++ case SPEED_100: ++ val = 1; ++ break; ++ case SPEED_1000: ++ val = 2; ++ break; ++ default: ++ dev_err(priv->device, "invalid link speed: %d\n", priv->phy->speed[id]); ++ priv->phy->phy_fixed[id] = 0; ++ return; ++ } ++ val = PMCR_SPEED(val); ++ val |= PMCR_LINK | PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN | ++ PMCR_TX_EN | PMCR_FORCE | PMCR_MAC_MODE | PMCR_IPG; ++ if (tx_fc) ++ val |= PMCR_TX_FC; ++ if (rx_fc) ++ val |= PMCR_RX_FC; ++ if (priv->phy->duplex[id]) ++ val |= PMCR_DUPLEX; ++ gsw_w32(gsw, val, GSW_REG_PORT_PMCR(id)); ++ dev_info(priv->device, "using fixed link parameters\n"); ++ return; ++ } ++ ++ if (priv->phy->phy_node[id] && priv->mii_bus->phy_map[id]) { ++ u32 val = PMCR_BACKPRES | PMCR_BACKOFF | PMCR_RX_EN | ++ PMCR_TX_EN | PMCR_MAC_MODE | PMCR_IPG; ++ ++ gsw_w32(gsw, val, GSW_REG_PORT_PMCR(id)); ++ fe_connect_phy_node(priv, priv->phy->phy_node[id]); ++ gsw->autopoll |= BIT(id); ++ gsw_auto_poll(gsw); ++ return; ++ } ++} ++ ++static void gsw_hw_init(struct mt7620_gsw *gsw) ++{ ++ u32 is_BGA = mt7620_is_bga(); ++ ++ rt_sysc_w32(rt_sysc_r32(SYSC_REG_CFG1) | BIT(8), SYSC_REG_CFG1); ++ gsw_w32(gsw, gsw_r32(gsw, GSW_REG_CKGCR) & ~(0x3 << 4), GSW_REG_CKGCR); ++ ++ /*correct PHY setting L3.0 BGA*/ ++ _mt7620_mii_write(gsw, 1, 31, 0x4000); //global, page 4 ++ ++ _mt7620_mii_write(gsw, 1, 17, 0x7444); ++ if (is_BGA) ++ _mt7620_mii_write(gsw, 1, 19, 0x0114); ++ else ++ _mt7620_mii_write(gsw, 1, 19, 0x0117); ++ ++ _mt7620_mii_write(gsw, 1, 22, 0x10cf); ++ _mt7620_mii_write(gsw, 1, 25, 0x6212); ++ _mt7620_mii_write(gsw, 1, 26, 0x0777); ++ _mt7620_mii_write(gsw, 1, 29, 0x4000); ++ _mt7620_mii_write(gsw, 1, 28, 0xc077); ++ _mt7620_mii_write(gsw, 1, 24, 0x0000); ++ ++ _mt7620_mii_write(gsw, 1, 31, 0x3000); //global, page 3 ++ _mt7620_mii_write(gsw, 1, 17, 0x4838); ++ ++ _mt7620_mii_write(gsw, 1, 31, 0x2000); //global, page 2 ++ if (is_BGA) { ++ _mt7620_mii_write(gsw, 1, 21, 0x0515); ++ _mt7620_mii_write(gsw, 1, 22, 0x0053); ++ _mt7620_mii_write(gsw, 1, 23, 0x00bf); ++ _mt7620_mii_write(gsw, 1, 24, 0x0aaf); ++ _mt7620_mii_write(gsw, 1, 25, 0x0fad); ++ _mt7620_mii_write(gsw, 1, 26, 0x0fc1); ++ } else { ++ _mt7620_mii_write(gsw, 1, 21, 0x0517); ++ _mt7620_mii_write(gsw, 1, 22, 0x0fd2); ++ _mt7620_mii_write(gsw, 1, 23, 0x00bf); ++ _mt7620_mii_write(gsw, 1, 24, 0x0aab); ++ _mt7620_mii_write(gsw, 1, 25, 0x00ae); ++ _mt7620_mii_write(gsw, 1, 26, 0x0fff); ++ } ++ _mt7620_mii_write(gsw, 1, 31, 0x1000); //global, page 1 ++ _mt7620_mii_write(gsw, 1, 17, 0xe7f8); ++ ++ _mt7620_mii_write(gsw, 1, 31, 0x8000); //local, page 0 ++ _mt7620_mii_write(gsw, 0, 30, 0xa000); ++ _mt7620_mii_write(gsw, 1, 30, 0xa000); ++ _mt7620_mii_write(gsw, 2, 30, 0xa000); ++ _mt7620_mii_write(gsw, 3, 30, 0xa000); ++ ++ _mt7620_mii_write(gsw, 0, 4, 0x05e1); ++ _mt7620_mii_write(gsw, 1, 4, 0x05e1); ++ _mt7620_mii_write(gsw, 2, 4, 0x05e1); ++ _mt7620_mii_write(gsw, 3, 4, 0x05e1); ++ _mt7620_mii_write(gsw, 1, 31, 0xa000); //local, page 2 ++ _mt7620_mii_write(gsw, 0, 16, 0x1111); ++ _mt7620_mii_write(gsw, 1, 16, 0x1010); ++ _mt7620_mii_write(gsw, 2, 16, 0x1515); ++ _mt7620_mii_write(gsw, 3, 16, 0x0f0f); ++ ++ /* CPU Port6 Force Link 1G, FC ON */ ++ gsw_w32(gsw, 0x5e33b, GSW_REG_PORT_PMCR(6)); ++ /* Set Port6 CPU Port */ ++ gsw_w32(gsw, 0x7f7f7fe0, 0x0010); ++ ++ /* setup port 4 */ ++ if (gsw->port4 == PORT4_EPHY) { ++ u32 val = rt_sysc_r32(SYSCFG1); ++ val |= 3 << 14; ++ rt_sysc_w32(val, SYSCFG1); ++ _mt7620_mii_write(gsw, 4, 30, 0xa000); ++ _mt7620_mii_write(gsw, 4, 4, 0x05e1); ++ _mt7620_mii_write(gsw, 4, 16, 0x1313); ++ pr_info("gsw: setting port4 to ephy mode\n"); ++ } ++} ++ ++void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac) ++{ ++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv; ++ unsigned long flags; ++ ++ spin_lock_irqsave(&priv->page_lock, flags); ++ gsw_w32(gsw, (mac[0] << 8) | mac[1], GSW_REG_SMACCR1); ++ gsw_w32(gsw, (mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5], ++ GSW_REG_SMACCR0); ++ spin_unlock_irqrestore(&priv->page_lock, flags); ++} ++ ++static struct of_device_id gsw_match[] = { ++ { .compatible = "ralink,mt7620a-gsw" }, ++ {} ++}; ++ ++int mt7620_gsw_config(struct fe_priv *priv) ++{ ++ struct mt7620_gsw *gsw = (struct mt7620_gsw *) priv->soc->swpriv; ++ ++ /* is the mt7530 internal or external */ ++ if ((_mt7620_mii_read(gsw, 0x1f, 2) == 1) && (_mt7620_mii_read(gsw, 0x1f, 3) == 0xbeef)) ++ mt7530_probe(priv->device, NULL, priv->mii_bus); ++ else ++ mt7530_probe(priv->device, gsw->base, NULL); ++ ++ return 0; ++} ++ ++int mt7620_gsw_probe(struct fe_priv *priv) ++{ ++ struct mt7620_gsw *gsw; ++ struct device_node *np; ++ const char *port4 = NULL; ++ ++ np = of_find_matching_node(NULL, gsw_match); ++ if (!np) { ++ dev_err(priv->device, "no gsw node found\n"); ++ return -EINVAL; ++ } ++ np = of_node_get(np); ++ ++ gsw = devm_kzalloc(priv->device, sizeof(struct mt7620_gsw), GFP_KERNEL); ++ if (!gsw) { ++ dev_err(priv->device, "no gsw memory for private data\n"); ++ return -ENOMEM; ++ } ++ ++ gsw->irq = irq_of_parse_and_map(np, 0); ++ if (!gsw->irq) { ++ dev_err(priv->device, "no gsw irq resource found\n"); ++ return -ENOMEM; ++ } ++ ++ gsw->base = of_iomap(np, 0); ++ if (!gsw->base) { ++ dev_err(priv->device, "gsw ioremap failed\n"); ++ return -ENOMEM; ++ } ++ ++ gsw->dev = priv->device; ++ priv->soc->swpriv = gsw; ++ ++ of_property_read_string(np, "ralink,port4", &port4); ++ if (port4 && !strcmp(port4, "ephy")) ++ gsw->port4 = PORT4_EPHY; ++ else if (port4 && !strcmp(port4, "gmac")) ++ gsw->port4 = PORT4_EXT; ++ else ++ WARN_ON(port4); ++ ++ gsw_hw_init(gsw); ++ ++ gsw_w32(gsw, ~PORT_IRQ_ST_CHG, GSW_REG_IMR); ++ request_irq(gsw->irq, gsw_interrupt, 0, "gsw", priv); ++ ++ return 0; ++} +diff --git a/drivers/net/ethernet/ralink/gsw_mt7620a.h b/drivers/net/ethernet/ralink/gsw_mt7620a.h +new file mode 100644 +index 0000000..c87761a +--- /dev/null ++++ b/drivers/net/ethernet/ralink/gsw_mt7620a.h +@@ -0,0 +1,30 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#ifndef _RALINK_GSW_MT7620_H__ ++#define _RALINK_GSW_MT7620_H__ ++ ++extern int mt7620_gsw_config(struct fe_priv *priv); ++extern int mt7620_gsw_probe(struct fe_priv *priv); ++extern void mt7620_set_mac(struct fe_priv *priv, unsigned char *mac); ++extern int mt7620_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val); ++extern int mt7620_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg); ++extern void mt7620_mdio_link_adjust(struct fe_priv *priv, int port); ++extern void mt7620_port_init(struct fe_priv *priv, struct device_node *np); ++extern int mt7620a_has_carrier(struct fe_priv *priv); ++ ++#endif +diff --git a/drivers/net/ethernet/ralink/mdio.c b/drivers/net/ethernet/ralink/mdio.c +new file mode 100644 +index 0000000..32bf98b +--- /dev/null ++++ b/drivers/net/ethernet/ralink/mdio.c +@@ -0,0 +1,244 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/dma-mapping.h> ++#include <linux/init.h> ++#include <linux/skbuff.h> ++#include <linux/etherdevice.h> ++#include <linux/ethtool.h> ++#include <linux/platform_device.h> ++#include <linux/phy.h> ++#include <linux/of_device.h> ++#include <linux/clk.h> ++#include <linux/of_net.h> ++#include <linux/of_mdio.h> ++ ++#include "ralink_soc_eth.h" ++#include "mdio.h" ++ ++static int fe_mdio_reset(struct mii_bus *bus) ++{ ++ /* TODO */ ++ return 0; ++} ++ ++static void fe_phy_link_adjust(struct net_device *dev) ++{ ++ struct fe_priv *priv = netdev_priv(dev); ++ unsigned long flags; ++ int i; ++ ++ spin_lock_irqsave(&priv->phy->lock, flags); ++ for (i = 0; i < 8; i++) { ++ if (priv->phy->phy_node[i]) { ++ struct phy_device *phydev = priv->phy->phy[i]; ++ int status_change = 0; ++ ++ if (phydev->link) ++ if (priv->phy->duplex[i] != phydev->duplex || ++ priv->phy->speed[i] != phydev->speed) ++ status_change = 1; ++ ++ if (phydev->link != priv->link[i]) ++ status_change = 1; ++ ++ switch (phydev->speed) { ++ case SPEED_1000: ++ case SPEED_100: ++ case SPEED_10: ++ priv->link[i] = phydev->link; ++ priv->phy->duplex[i] = phydev->duplex; ++ priv->phy->speed[i] = phydev->speed; ++ ++ if (status_change && priv->soc->mdio_adjust_link) ++ priv->soc->mdio_adjust_link(priv, i); ++ break; ++ } ++ } ++ } ++} ++ ++int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node) ++{ ++ const __be32 *_port = NULL; ++ struct phy_device *phydev; ++ int phy_mode, port; ++ ++ _port = of_get_property(phy_node, "reg", NULL); ++ ++ if (!_port || (be32_to_cpu(*_port) >= 0x20)) { ++ pr_err("%s: invalid port id\n", phy_node->name); ++ return -EINVAL; ++ } ++ port = be32_to_cpu(*_port); ++ phy_mode = of_get_phy_mode(phy_node); ++ if (phy_mode < 0) { ++ dev_err(priv->device, "incorrect phy-mode %d\n", phy_mode); ++ priv->phy->phy_node[port] = NULL; ++ return -EINVAL; ++ } ++ ++ phydev = of_phy_connect(priv->netdev, phy_node, fe_phy_link_adjust, ++ 0, phy_mode); ++ if (IS_ERR(phydev)) { ++ dev_err(priv->device, "could not connect to PHY\n"); ++ priv->phy->phy_node[port] = NULL; ++ return PTR_ERR(phydev); ++ } ++ ++ phydev->supported &= PHY_GBIT_FEATURES; ++ phydev->advertising = phydev->supported; ++ phydev->no_auto_carrier_off = 1; ++ ++ dev_info(priv->device, ++ "connected port %d to PHY at %s [uid=%08x, driver=%s]\n", ++ port, dev_name(&phydev->dev), phydev->phy_id, ++ phydev->drv->name); ++ ++ priv->phy->phy[port] = phydev; ++ priv->link[port] = 0; ++ ++ return 0; ++} ++ ++static int fe_phy_connect(struct fe_priv *priv) ++{ ++ return 0; ++} ++ ++static void fe_phy_disconnect(struct fe_priv *priv) ++{ ++ unsigned long flags; ++ int i; ++ ++ for (i = 0; i < 8; i++) ++ if (priv->phy->phy_fixed[i]) { ++ spin_lock_irqsave(&priv->phy->lock, flags); ++ priv->link[i] = 0; ++ if (priv->soc->mdio_adjust_link) ++ priv->soc->mdio_adjust_link(priv, i); ++ spin_unlock_irqrestore(&priv->phy->lock, flags); ++ } else if (priv->phy->phy[i]) { ++ phy_disconnect(priv->phy->phy[i]); ++ } ++} ++ ++static void fe_phy_start(struct fe_priv *priv) ++{ ++ unsigned long flags; ++ int i; ++ ++ for (i = 0; i < 8; i++) { ++ if (priv->phy->phy_fixed[i]) { ++ spin_lock_irqsave(&priv->phy->lock, flags); ++ priv->link[i] = 1; ++ if (priv->soc->mdio_adjust_link) ++ priv->soc->mdio_adjust_link(priv, i); ++ spin_unlock_irqrestore(&priv->phy->lock, flags); ++ } else if (priv->phy->phy[i]) { ++ phy_start(priv->phy->phy[i]); ++ } ++ } ++} ++ ++static void fe_phy_stop(struct fe_priv *priv) ++{ ++ unsigned long flags; ++ int i; ++ ++ for (i = 0; i < 8; i++) ++ if (priv->phy->phy_fixed[i]) { ++ spin_lock_irqsave(&priv->phy->lock, flags); ++ priv->link[i] = 0; ++ if (priv->soc->mdio_adjust_link) ++ priv->soc->mdio_adjust_link(priv, i); ++ spin_unlock_irqrestore(&priv->phy->lock, flags); ++ } else if (priv->phy->phy[i]) { ++ phy_stop(priv->phy->phy[i]); ++ } ++} ++ ++static struct fe_phy phy_ralink = { ++ .connect = fe_phy_connect, ++ .disconnect = fe_phy_disconnect, ++ .start = fe_phy_start, ++ .stop = fe_phy_stop, ++}; ++ ++int fe_mdio_init(struct fe_priv *priv) ++{ ++ struct device_node *mii_np; ++ int err; ++ ++ if (!priv->soc->mdio_read || !priv->soc->mdio_write) ++ return 0; ++ ++ spin_lock_init(&phy_ralink.lock); ++ priv->phy = &phy_ralink; ++ ++ mii_np = of_get_child_by_name(priv->device->of_node, "mdio-bus"); ++ if (!mii_np) { ++ dev_err(priv->device, "no %s child node found", "mdio-bus"); ++ return -ENODEV; ++ } ++ ++ if (!of_device_is_available(mii_np)) { ++ err = 0; ++ goto err_put_node; ++ } ++ ++ priv->mii_bus = mdiobus_alloc(); ++ if (priv->mii_bus == NULL) { ++ err = -ENOMEM; ++ goto err_put_node; ++ } ++ ++ priv->mii_bus->name = "mdio"; ++ priv->mii_bus->read = priv->soc->mdio_read; ++ priv->mii_bus->write = priv->soc->mdio_write; ++ priv->mii_bus->reset = fe_mdio_reset; ++ priv->mii_bus->irq = priv->mii_irq; ++ priv->mii_bus->priv = priv; ++ priv->mii_bus->parent = priv->device; ++ ++ snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s", mii_np->name); ++ err = of_mdiobus_register(priv->mii_bus, mii_np); ++ if (err) ++ goto err_free_bus; ++ ++ return 0; ++ ++err_free_bus: ++ kfree(priv->mii_bus); ++err_put_node: ++ of_node_put(mii_np); ++ priv->mii_bus = NULL; ++ return err; ++} ++ ++void fe_mdio_cleanup(struct fe_priv *priv) ++{ ++ if (!priv->mii_bus) ++ return; ++ ++ mdiobus_unregister(priv->mii_bus); ++ of_node_put(priv->mii_bus->dev.of_node); ++ kfree(priv->mii_bus); ++} +diff --git a/drivers/net/ethernet/ralink/mdio.h b/drivers/net/ethernet/ralink/mdio.h +new file mode 100644 +index 0000000..c3910a0 +--- /dev/null ++++ b/drivers/net/ethernet/ralink/mdio.h +@@ -0,0 +1,29 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#ifndef _RALINK_MDIO_H__ ++#define _RALINK_MDIO_H__ ++ ++#ifdef CONFIG_NET_RALINK_MDIO ++extern int fe_mdio_init(struct fe_priv *priv); ++extern void fe_mdio_cleanup(struct fe_priv *priv); ++extern int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node); ++#else ++static inline int fe_mdio_init(struct fe_priv *priv) { return 0; } ++static inline void fe_mdio_cleanup(struct fe_priv *priv) {} ++#endif ++#endif +diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.c b/drivers/net/ethernet/ralink/mdio_rt2880.c +new file mode 100644 +index 0000000..b99eb46 +--- /dev/null ++++ b/drivers/net/ethernet/ralink/mdio_rt2880.c +@@ -0,0 +1,232 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/dma-mapping.h> ++#include <linux/init.h> ++#include <linux/skbuff.h> ++#include <linux/etherdevice.h> ++#include <linux/ethtool.h> ++#include <linux/platform_device.h> ++#include <linux/phy.h> ++#include <linux/of_device.h> ++#include <linux/clk.h> ++#include <linux/of_net.h> ++#include <linux/of_mdio.h> ++ ++#include "ralink_soc_eth.h" ++#include "mdio_rt2880.h" ++#include "mdio.h" ++ ++#define FE_MDIO_RETRY 1000 ++ ++static unsigned char *rt2880_speed_str(struct fe_priv *priv) ++{ ++ switch (priv->phy->speed[0]) { ++ case SPEED_1000: ++ return "1000"; ++ case SPEED_100: ++ return "100"; ++ case SPEED_10: ++ return "10"; ++ } ++ ++ return "?"; ++} ++ ++void rt2880_mdio_link_adjust(struct fe_priv *priv, int port) ++{ ++ u32 mdio_cfg; ++ ++ if (!priv->link[0]) { ++ netif_carrier_off(priv->netdev); ++ netdev_info(priv->netdev, "link down\n"); ++ return; ++ } ++ ++ mdio_cfg = FE_MDIO_CFG_TX_CLK_SKEW_200 | ++ FE_MDIO_CFG_RX_CLK_SKEW_200 | ++ FE_MDIO_CFG_GP1_FRC_EN; ++ ++ if (priv->phy->duplex[0] == DUPLEX_FULL) ++ mdio_cfg |= FE_MDIO_CFG_GP1_DUPLEX; ++ ++ if (priv->phy->tx_fc[0]) ++ mdio_cfg |= FE_MDIO_CFG_GP1_FC_TX; ++ ++ if (priv->phy->rx_fc[0]) ++ mdio_cfg |= FE_MDIO_CFG_GP1_FC_RX; ++ ++ switch (priv->phy->speed[0]) { ++ case SPEED_10: ++ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_10; ++ break; ++ case SPEED_100: ++ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_100; ++ break; ++ case SPEED_1000: ++ mdio_cfg |= FE_MDIO_CFG_GP1_SPEED_1000; ++ break; ++ default: ++ BUG(); ++ } ++ ++ fe_w32(mdio_cfg, FE_MDIO_CFG); ++ ++ netif_carrier_on(priv->netdev); ++ netdev_info(priv->netdev, "link up (%sMbps/%s duplex)\n", ++ rt2880_speed_str(priv), ++ (DUPLEX_FULL == priv->phy->duplex[0]) ? "Full" : "Half"); ++} ++ ++static int rt2880_mdio_wait_ready(struct fe_priv *priv) ++{ ++ int retries; ++ ++ retries = FE_MDIO_RETRY; ++ while (1) { ++ u32 t; ++ ++ t = fe_r32(FE_MDIO_ACCESS); ++ if ((t & (0x1 << 31)) == 0) ++ return 0; ++ ++ if (retries-- == 0) ++ break; ++ ++ udelay(1); ++ } ++ ++ dev_err(priv->device, "MDIO operation timed out\n"); ++ return -ETIMEDOUT; ++} ++ ++int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg) ++{ ++ struct fe_priv *priv = bus->priv; ++ int err; ++ u32 t; ++ ++ err = rt2880_mdio_wait_ready(priv); ++ if (err) ++ return 0xffff; ++ ++ t = (phy_addr << 24) | (phy_reg << 16); ++ fe_w32(t, FE_MDIO_ACCESS); ++ t |= (1 << 31); ++ fe_w32(t, FE_MDIO_ACCESS); ++ ++ err = rt2880_mdio_wait_ready(priv); ++ if (err) ++ return 0xffff; ++ ++ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__, ++ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff); ++ ++ return fe_r32(FE_MDIO_ACCESS) & 0xffff; ++} ++ ++int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val) ++{ ++ struct fe_priv *priv = bus->priv; ++ int err; ++ u32 t; ++ ++ pr_debug("%s: addr=%04x, reg=%04x, value=%04x\n", __func__, ++ phy_addr, phy_reg, fe_r32(FE_MDIO_ACCESS) & 0xffff); ++ ++ err = rt2880_mdio_wait_ready(priv); ++ if (err) ++ return err; ++ ++ t = (1 << 30) | (phy_addr << 24) | (phy_reg << 16) | val; ++ fe_w32(t, FE_MDIO_ACCESS); ++ t |= (1 << 31); ++ fe_w32(t, FE_MDIO_ACCESS); ++ ++ return rt2880_mdio_wait_ready(priv); ++} ++ ++void rt2880_port_init(struct fe_priv *priv, struct device_node *np) ++{ ++ const __be32 *id = of_get_property(np, "reg", NULL); ++ const __be32 *link; ++ int size; ++ int phy_mode; ++ ++ if (!id || (be32_to_cpu(*id) != 0)) { ++ pr_err("%s: invalid port id\n", np->name); ++ return; ++ } ++ ++ priv->phy->phy_fixed[0] = of_get_property(np, "ralink,fixed-link", &size); ++ if (priv->phy->phy_fixed[0] && (size != (4 * sizeof(*priv->phy->phy_fixed[0])))) { ++ pr_err("%s: invalid fixed link property\n", np->name); ++ priv->phy->phy_fixed[0] = NULL; ++ return; ++ } ++ ++ phy_mode = of_get_phy_mode(np); ++ switch (phy_mode) { ++ case PHY_INTERFACE_MODE_RGMII: ++ break; ++ case PHY_INTERFACE_MODE_MII: ++ break; ++ case PHY_INTERFACE_MODE_RMII: ++ break; ++ default: ++ if (!priv->phy->phy_fixed[0]) ++ dev_err(priv->device, "port %d - invalid phy mode\n", priv->phy->speed[0]); ++ break; ++ } ++ ++ priv->phy->phy_node[0] = of_parse_phandle(np, "phy-handle", 0); ++ if (!priv->phy->phy_node[0] && !priv->phy->phy_fixed[0]) ++ return; ++ ++ if (priv->phy->phy_fixed[0]) { ++ link = priv->phy->phy_fixed[0]; ++ priv->phy->speed[0] = be32_to_cpup(link++); ++ priv->phy->duplex[0] = be32_to_cpup(link++); ++ priv->phy->tx_fc[0] = be32_to_cpup(link++); ++ priv->phy->rx_fc[0] = be32_to_cpup(link++); ++ ++ priv->link[0] = 1; ++ switch (priv->phy->speed[0]) { ++ case SPEED_10: ++ break; ++ case SPEED_100: ++ break; ++ case SPEED_1000: ++ break; ++ default: ++ dev_err(priv->device, "invalid link speed: %d\n", priv->phy->speed[0]); ++ priv->phy->phy_fixed[0] = 0; ++ return; ++ } ++ dev_info(priv->device, "using fixed link parameters\n"); ++ rt2880_mdio_link_adjust(priv, 0); ++ return; ++ } ++ if (priv->phy->phy_node[0] && priv->mii_bus->phy_map[0]) { ++ fe_connect_phy_node(priv, priv->phy->phy_node[0]); ++ } ++ ++ return; ++} +diff --git a/drivers/net/ethernet/ralink/mdio_rt2880.h b/drivers/net/ethernet/ralink/mdio_rt2880.h +new file mode 100644 +index 0000000..51e3633 +--- /dev/null ++++ b/drivers/net/ethernet/ralink/mdio_rt2880.h +@@ -0,0 +1,26 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#ifndef _RALINK_MDIO_RT2880_H__ ++#define _RALINK_MDIO_RT2880_H__ ++ ++void rt2880_mdio_link_adjust(struct fe_priv *priv, int port); ++int rt2880_mdio_read(struct mii_bus *bus, int phy_addr, int phy_reg); ++int rt2880_mdio_write(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val); ++void rt2880_port_init(struct fe_priv *priv, struct device_node *np); ++ ++#endif +diff --git a/drivers/net/ethernet/ralink/mt7530.c b/drivers/net/ethernet/ralink/mt7530.c +new file mode 100644 +index 0000000..06b67ee +--- /dev/null ++++ b/drivers/net/ethernet/ralink/mt7530.c +@@ -0,0 +1,579 @@ ++/* ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/if.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/list.h> ++#include <linux/if_ether.h> ++#include <linux/skbuff.h> ++#include <linux/netdevice.h> ++#include <linux/netlink.h> ++#include <linux/bitops.h> ++#include <net/genetlink.h> ++#include <linux/switch.h> ++#include <linux/delay.h> ++#include <linux/phy.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/lockdep.h> ++#include <linux/workqueue.h> ++#include <linux/of_device.h> ++ ++#include "mt7530.h" ++ ++#define MT7530_CPU_PORT 6 ++#define MT7530_NUM_PORTS 8 ++#define MT7530_NUM_VLANS 16 ++#define MT7530_MAX_VID 4095 ++#define MT7530_MIN_VID 0 ++ ++/* registers */ ++#define REG_ESW_VLAN_VTCR 0x90 ++#define REG_ESW_VLAN_VAWD1 0x94 ++#define REG_ESW_VLAN_VAWD2 0x98 ++#define REG_ESW_VLAN_VTIM(x) (0x100 + 4 * ((x) / 2)) ++ ++#define REG_ESW_VLAN_VAWD1_IVL_MAC BIT(30) ++#define REG_ESW_VLAN_VAWD1_VTAG_EN BIT(28) ++#define REG_ESW_VLAN_VAWD1_VALID BIT(0) ++ ++/* vlan egress mode */ ++enum { ++ ETAG_CTRL_UNTAG = 0, ++ ETAG_CTRL_TAG = 2, ++ ETAG_CTRL_SWAP = 1, ++ ETAG_CTRL_STACK = 3, ++}; ++ ++#define REG_ESW_PORT_PCR(x) (0x2004 | ((x) << 8)) ++#define REG_ESW_PORT_PVC(x) (0x2010 | ((x) << 8)) ++#define REG_ESW_PORT_PPBV1(x) (0x2014 | ((x) << 8)) ++enum { ++ /* Global attributes. */ ++ MT7530_ATTR_ENABLE_VLAN, ++}; ++ ++struct mt7530_port_entry { ++ u16 pvid; ++}; ++ ++struct mt7530_vlan_entry { ++ u16 vid; ++ u8 member; ++ u8 etags; ++}; ++ ++struct mt7530_priv { ++ void __iomem *base; ++ struct mii_bus *bus; ++ struct switch_dev swdev; ++ ++ bool global_vlan_enable; ++ struct mt7530_vlan_entry vlan_entries[MT7530_NUM_VLANS]; ++ struct mt7530_port_entry port_entries[MT7530_NUM_PORTS]; ++}; ++ ++struct mt7530_mapping { ++ char *name; ++ u16 pvids[MT7530_NUM_PORTS]; ++ u8 members[MT7530_NUM_VLANS]; ++ u8 etags[MT7530_NUM_VLANS]; ++ u16 vids[MT7530_NUM_VLANS]; ++} mt7530_defaults[] = { ++ { ++ .name = "llllw", ++ .pvids = { 1, 1, 1, 1, 2, 1, 1 }, ++ .members = { 0, 0x6f, 0x50 }, ++ .etags = { 0, 0x40, 0x40 }, ++ .vids = { 0, 1, 2 }, ++ }, { ++ .name = "wllll", ++ .pvids = { 2, 1, 1, 1, 1, 1, 1 }, ++ .members = { 0, 0x7e, 0x41 }, ++ .etags = { 0, 0x40, 0x40 }, ++ .vids = { 0, 1, 2 }, ++ }, ++}; ++ ++struct mt7530_mapping* ++mt7530_find_mapping(struct device_node *np) ++{ ++ const char *map; ++ int i; ++ ++ if (of_property_read_string(np, "ralink,port-map", &map)) ++ return NULL; ++ ++ for (i = 0; i < ARRAY_SIZE(mt7530_defaults); i++) ++ if (!strcmp(map, mt7530_defaults[i].name)) ++ return &mt7530_defaults[i]; ++ ++ return NULL; ++} ++ ++static void ++mt7530_apply_mapping(struct mt7530_priv *mt7530, struct mt7530_mapping *map) ++{ ++ int i = 0; ++ ++ mt7530->global_vlan_enable = 1; ++ ++ for (i = 0; i < MT7530_NUM_PORTS; i++) ++ mt7530->port_entries[i].pvid = map->pvids[i]; ++ ++ for (i = 0; i < MT7530_NUM_VLANS; i++) { ++ mt7530->vlan_entries[i].member = map->members[i]; ++ mt7530->vlan_entries[i].etags = map->etags[i]; ++ mt7530->vlan_entries[i].vid = map->vids[i]; ++ } ++} ++ ++static int ++mt7530_reset_switch(struct switch_dev *dev) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ int i; ++ ++ memset(priv->port_entries, 0, sizeof(priv->port_entries)); ++ memset(priv->vlan_entries, 0, sizeof(priv->vlan_entries)); ++ ++ /* set default vid of each vlan to the same number of vlan, so the vid ++ * won't need be set explicitly. ++ */ ++ for (i = 0; i < MT7530_NUM_VLANS; i++) { ++ priv->vlan_entries[i].vid = i; ++ } ++ ++ return 0; ++} ++ ++static int ++mt7530_get_vlan_enable(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ ++ val->value.i = priv->global_vlan_enable; ++ ++ return 0; ++} ++ ++static int ++mt7530_set_vlan_enable(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ ++ priv->global_vlan_enable = val->value.i != 0; ++ ++ return 0; ++} ++ ++static u32 ++mt7530_r32(struct mt7530_priv *priv, u32 reg) ++{ ++ u32 val; ++ if (priv->bus) { ++ u16 high, low; ++ ++ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff); ++ low = mdiobus_read(priv->bus, 0x1f, (reg >> 2) & 0xf); ++ high = mdiobus_read(priv->bus, 0x1f, 0x10); ++ ++ return (high << 16) | (low & 0xffff); ++ } ++ ++ val = ioread32(priv->base + reg); ++ pr_debug("MT7530 MDIO Read [%04x]=%08x\n", reg, val); ++ ++ return val; ++} ++ ++static void ++mt7530_w32(struct mt7530_priv *priv, u32 reg, u32 val) ++{ ++ if (priv->bus) { ++ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff); ++ mdiobus_write(priv->bus, 0x1f, (reg >> 2) & 0xf, val & 0xffff); ++ mdiobus_write(priv->bus, 0x1f, 0x10, val >> 16); ++ return; ++ } ++ ++ pr_debug("MT7530 MDIO Write[%04x]=%08x\n", reg, val); ++ iowrite32(val, priv->base + reg); ++} ++ ++static void ++mt7530_vtcr(struct mt7530_priv *priv, u32 cmd, u32 val) ++{ ++ int i; ++ ++ mt7530_w32(priv, REG_ESW_VLAN_VTCR, BIT(31) | (cmd << 12) | val); ++ ++ for (i = 0; i < 20; i++) { ++ u32 val = mt7530_r32(priv, REG_ESW_VLAN_VTCR); ++ ++ if ((val & BIT(31)) == 0) ++ break; ++ ++ udelay(1000); ++ } ++ if (i == 20) ++ printk("mt7530: vtcr timeout\n"); ++} ++ ++static int ++mt7530_get_port_pvid(struct switch_dev *dev, int port, int *val) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ ++ if (port >= MT7530_NUM_PORTS) ++ return -EINVAL; ++ ++ *val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(port)); ++ *val &= 0xfff; ++ ++ return 0; ++} ++ ++static int ++mt7530_set_port_pvid(struct switch_dev *dev, int port, int pvid) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ ++ if (port >= MT7530_NUM_PORTS) ++ return -EINVAL; ++ ++ if (pvid < MT7530_MIN_VID || pvid > MT7530_MAX_VID) ++ return -EINVAL; ++ ++ priv->port_entries[port].pvid = pvid; ++ ++ return 0; ++} ++ ++static int ++mt7530_get_vlan_ports(struct switch_dev *dev, struct switch_val *val) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ u32 member; ++ u32 etags; ++ int i; ++ ++ val->len = 0; ++ ++ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS) ++ return -EINVAL; ++ ++ mt7530_vtcr(priv, 0, val->port_vlan); ++ ++ member = mt7530_r32(priv, REG_ESW_VLAN_VAWD1); ++ member >>= 16; ++ member &= 0xff; ++ ++ etags = mt7530_r32(priv, REG_ESW_VLAN_VAWD2); ++ ++ for (i = 0; i < MT7530_NUM_PORTS; i++) { ++ struct switch_port *p; ++ int etag; ++ ++ if (!(member & BIT(i))) ++ continue; ++ ++ p = &val->value.ports[val->len++]; ++ p->id = i; ++ ++ etag = (etags >> (i * 2)) & 0x3; ++ ++ if (etag == ETAG_CTRL_TAG) ++ p->flags |= BIT(SWITCH_PORT_FLAG_TAGGED); ++ else if (etag != ETAG_CTRL_UNTAG) ++ printk("vlan egress tag control neither untag nor tag.\n"); ++ } ++ ++ return 0; ++} ++ ++static int ++mt7530_set_vlan_ports(struct switch_dev *dev, struct switch_val *val) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ u8 member = 0; ++ u8 etags = 0; ++ int i; ++ ++ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VLANS || ++ val->len > MT7530_NUM_PORTS) ++ return -EINVAL; ++ ++ for (i = 0; i < val->len; i++) { ++ struct switch_port *p = &val->value.ports[i]; ++ ++ if (p->id >= MT7530_NUM_PORTS) ++ return -EINVAL; ++ ++ member |= BIT(p->id); ++ ++ if (p->flags & BIT(SWITCH_PORT_FLAG_TAGGED)) ++ etags |= BIT(p->id); ++ } ++ priv->vlan_entries[val->port_vlan].member = member; ++ priv->vlan_entries[val->port_vlan].etags = etags; ++ ++ return 0; ++} ++ ++static int ++mt7530_set_vid(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ int vlan; ++ u16 vid; ++ ++ vlan = val->port_vlan; ++ vid = (u16)val->value.i; ++ ++ if (vlan < 0 || vlan >= MT7530_NUM_VLANS) ++ return -EINVAL; ++ ++ if (vid < MT7530_MIN_VID || vid > MT7530_MAX_VID) ++ return -EINVAL; ++ ++ priv->vlan_entries[vlan].vid = vid; ++ return 0; ++} ++ ++static int ++mt7530_get_vid(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ u32 vid; ++ int vlan; ++ ++ vlan = val->port_vlan; ++ ++ vid = mt7530_r32(priv, REG_ESW_VLAN_VTIM(vlan)); ++ if (vlan & 1) ++ vid = vid >> 12; ++ vid &= 0xfff; ++ ++ val->value.i = vid; ++ return 0; ++} ++ ++static int ++mt7530_apply_config(struct switch_dev *dev) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ int i, j; ++ ++ if (!priv->global_vlan_enable) { ++ for (i = 0; i < MT7530_NUM_PORTS; i++) ++ mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0000); ++ ++ for (i = 0; i < MT7530_NUM_PORTS; i++) ++ mt7530_w32(priv, REG_ESW_PORT_PVC(i), 0x8100000c); ++ ++ return 0; ++ } ++ ++ /* set all ports as security mode */ ++ for (i = 0; i < MT7530_NUM_PORTS; i++) ++ mt7530_w32(priv, REG_ESW_PORT_PCR(i), 0x00ff0003); ++ ++ /* set all ports as user port */ ++ for (i = 0; i < MT7530_NUM_PORTS; i++) ++ mt7530_w32(priv, REG_ESW_PORT_PVC(i), 0x81000000); ++ ++ for (i = 0; i < MT7530_NUM_VLANS; i++) { ++ u16 vid = priv->vlan_entries[i].vid; ++ u8 member = priv->vlan_entries[i].member; ++ u8 etags = priv->vlan_entries[i].etags; ++ u32 val; ++ ++ /* vid of vlan */ ++ val = mt7530_r32(priv, REG_ESW_VLAN_VTIM(i)); ++ if (i % 2 == 0) { ++ val &= 0xfff000; ++ val |= vid; ++ } else { ++ val &= 0xfff; ++ val |= (vid << 12); ++ } ++ mt7530_w32(priv, REG_ESW_VLAN_VTIM(i), val); ++ ++ /* vlan port membership */ ++ if (member) ++ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, REG_ESW_VLAN_VAWD1_IVL_MAC | ++ REG_ESW_VLAN_VAWD1_VTAG_EN | (member << 16) | ++ REG_ESW_VLAN_VAWD1_VALID); ++ else ++ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, 0); ++ ++ /* egress mode */ ++ val = 0; ++ for (j = 0; j < MT7530_NUM_PORTS; j++) { ++ if (etags & BIT(j)) ++ val |= ETAG_CTRL_TAG << (j * 2); ++ else ++ val |= ETAG_CTRL_UNTAG << (j * 2); ++ } ++ mt7530_w32(priv, REG_ESW_VLAN_VAWD2, val); ++ ++ /* write to vlan table */ ++ mt7530_vtcr(priv, 1, i); ++ } ++ ++ /* Port Default PVID */ ++ for (i = 0; i < MT7530_NUM_PORTS; i++) { ++ u32 val; ++ val = mt7530_r32(priv, REG_ESW_PORT_PPBV1(i)); ++ val &= ~0xfff; ++ val |= priv->port_entries[i].pvid; ++ mt7530_w32(priv, REG_ESW_PORT_PPBV1(i), val); ++ } ++ ++ return 0; ++} ++ ++static int ++mt7530_get_port_link(struct switch_dev *dev, int port, ++ struct switch_port_link *link) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ u32 speed, pmsr; ++ ++ if (port < 0 || port >= MT7530_NUM_PORTS) ++ return -EINVAL; ++ ++ pmsr = mt7530_r32(priv, 0x3008 + (0x100 * port)); ++ ++ link->link = pmsr & 1; ++ link->duplex = (pmsr >> 1) & 1; ++ speed = (pmsr >> 2) & 3; ++ ++ switch (speed) { ++ case 0: ++ link->speed = SWITCH_PORT_SPEED_10; ++ break; ++ case 1: ++ link->speed = SWITCH_PORT_SPEED_100; ++ break; ++ case 2: ++ case 3: /* forced gige speed can be 2 or 3 */ ++ link->speed = SWITCH_PORT_SPEED_1000; ++ break; ++ default: ++ link->speed = SWITCH_PORT_SPEED_UNKNOWN; ++ break; ++ } ++ ++ return 0; ++} ++ ++static const struct switch_attr mt7530_global[] = { ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "enable_vlan", ++ .description = "VLAN mode (1:enabled)", ++ .max = 1, ++ .id = MT7530_ATTR_ENABLE_VLAN, ++ .get = mt7530_get_vlan_enable, ++ .set = mt7530_set_vlan_enable, ++ }, ++}; ++ ++static const struct switch_attr mt7530_port[] = { ++}; ++ ++static const struct switch_attr mt7530_vlan[] = { ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "vid", ++ .description = "VLAN ID (0-4094)", ++ .set = mt7530_set_vid, ++ .get = mt7530_get_vid, ++ .max = 4094, ++ }, ++}; ++ ++static const struct switch_dev_ops mt7530_ops = { ++ .attr_global = { ++ .attr = mt7530_global, ++ .n_attr = ARRAY_SIZE(mt7530_global), ++ }, ++ .attr_port = { ++ .attr = mt7530_port, ++ .n_attr = ARRAY_SIZE(mt7530_port), ++ }, ++ .attr_vlan = { ++ .attr = mt7530_vlan, ++ .n_attr = ARRAY_SIZE(mt7530_vlan), ++ }, ++ .get_vlan_ports = mt7530_get_vlan_ports, ++ .set_vlan_ports = mt7530_set_vlan_ports, ++ .get_port_pvid = mt7530_get_port_pvid, ++ .set_port_pvid = mt7530_set_port_pvid, ++ .get_port_link = mt7530_get_port_link, ++ .apply_config = mt7530_apply_config, ++ .reset_switch = mt7530_reset_switch, ++}; ++ ++int ++mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus) ++{ ++ struct switch_dev *swdev; ++ struct mt7530_priv *mt7530; ++ struct mt7530_mapping *map; ++ int ret; ++ ++ if (bus && bus->phy_map[0x1f]->phy_id != 0x1beef) ++ return 0; ++ ++ mt7530 = devm_kzalloc(dev, sizeof(struct mt7530_priv), GFP_KERNEL); ++ if (!mt7530) ++ return -ENOMEM; ++ ++ mt7530->base = base; ++ mt7530->bus = bus; ++ mt7530->global_vlan_enable = 1; ++ ++ swdev = &mt7530->swdev; ++ swdev->name = "mt7530"; ++ swdev->alias = "mt7530"; ++ swdev->cpu_port = MT7530_CPU_PORT; ++ swdev->ports = MT7530_NUM_PORTS; ++ swdev->vlans = MT7530_NUM_VLANS; ++ swdev->ops = &mt7530_ops; ++ ++ ret = register_switch(swdev, NULL); ++ if (ret) { ++ dev_err(dev, "failed to register mt7530\n"); ++ return ret; ++ } ++ ++ dev_info(dev, "loaded mt7530 driver\n"); ++ ++ map = mt7530_find_mapping(dev->of_node); ++ if (map) ++ mt7530_apply_mapping(mt7530, map); ++ mt7530_apply_config(swdev); ++ ++ return 0; ++} +diff --git a/drivers/net/ethernet/ralink/mt7530.h b/drivers/net/ethernet/ralink/mt7530.h +new file mode 100644 +index 0000000..169b888 +--- /dev/null ++++ b/drivers/net/ethernet/ralink/mt7530.h +@@ -0,0 +1,20 @@ ++/* ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#ifndef _MT7530_H__ ++#define _MT7530_H__ ++ ++int mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus); ++ ++#endif +diff --git a/drivers/net/ethernet/ralink/ralink_soc_eth.c b/drivers/net/ethernet/ralink/ralink_soc_eth.c +new file mode 100644 +index 0000000..f3abab7 +--- /dev/null ++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c +@@ -0,0 +1,844 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/dma-mapping.h> ++#include <linux/init.h> ++#include <linux/skbuff.h> ++#include <linux/etherdevice.h> ++#include <linux/ethtool.h> ++#include <linux/platform_device.h> ++#include <linux/of_device.h> ++#include <linux/clk.h> ++#include <linux/of_net.h> ++#include <linux/of_mdio.h> ++#include <linux/if_vlan.h> ++#include <linux/reset.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++ ++#include "ralink_soc_eth.h" ++#include "esw_rt3052.h" ++#include "mdio.h" ++ ++#define TX_TIMEOUT (2 * HZ) ++#define MAX_RX_LENGTH 1536 ++#define DMA_DUMMY_DESC 0xffffffff ++ ++static const u32 fe_reg_table_default[FE_REG_COUNT] = { ++ [FE_REG_PDMA_GLO_CFG] = FE_PDMA_GLO_CFG, ++ [FE_REG_PDMA_RST_CFG] = FE_PDMA_RST_CFG, ++ [FE_REG_DLY_INT_CFG] = FE_DLY_INT_CFG, ++ [FE_REG_TX_BASE_PTR0] = FE_TX_BASE_PTR0, ++ [FE_REG_TX_MAX_CNT0] = FE_TX_MAX_CNT0, ++ [FE_REG_TX_CTX_IDX0] = FE_TX_CTX_IDX0, ++ [FE_REG_RX_BASE_PTR0] = FE_RX_BASE_PTR0, ++ [FE_REG_RX_MAX_CNT0] = FE_RX_MAX_CNT0, ++ [FE_REG_RX_CALC_IDX0] = FE_RX_CALC_IDX0, ++ [FE_REG_FE_INT_ENABLE] = FE_FE_INT_ENABLE, ++ [FE_REG_FE_INT_STATUS] = FE_FE_INT_STATUS, ++}; ++ ++static const u32 *fe_reg_table = fe_reg_table_default; ++ ++static void __iomem *fe_base = 0; ++ ++void fe_w32(u32 val, unsigned reg) ++{ ++ __raw_writel(val, fe_base + reg); ++} ++ ++u32 fe_r32(unsigned reg) ++{ ++ return __raw_readl(fe_base + reg); ++} ++ ++static inline void fe_reg_w32(u32 val, enum fe_reg reg) ++{ ++ fe_w32(val, fe_reg_table[reg]); ++} ++ ++static inline u32 fe_reg_r32(enum fe_reg reg) ++{ ++ return fe_r32(fe_reg_table[reg]); ++} ++ ++static inline void fe_int_disable(u32 mask) ++{ ++ fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) & ~mask, ++ FE_REG_FE_INT_ENABLE); ++ /* flush write */ ++ fe_reg_r32(FE_REG_FE_INT_ENABLE); ++} ++ ++static inline void fe_int_enable(u32 mask) ++{ ++ fe_reg_w32(fe_reg_r32(FE_REG_FE_INT_ENABLE) | mask, ++ FE_REG_FE_INT_ENABLE); ++ /* flush write */ ++ fe_reg_r32(FE_REG_FE_INT_ENABLE); ++} ++ ++static inline void fe_hw_set_macaddr(struct fe_priv *priv, unsigned char *mac) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&priv->page_lock, flags); ++ fe_w32((mac[0] << 8) | mac[1], FE_GDMA1_MAC_ADRH); ++ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5], ++ FE_GDMA1_MAC_ADRL); ++ spin_unlock_irqrestore(&priv->page_lock, flags); ++} ++ ++static int fe_set_mac_address(struct net_device *dev, void *p) ++{ ++ int ret = eth_mac_addr(dev, p); ++ ++ if (!ret) { ++ struct fe_priv *priv = netdev_priv(dev); ++ ++ if (priv->soc->set_mac) ++ priv->soc->set_mac(priv, dev->dev_addr); ++ else ++ fe_hw_set_macaddr(priv, p); ++ } ++ ++ return ret; ++} ++ ++static struct sk_buff* fe_alloc_skb(struct fe_priv *priv) ++{ ++ struct sk_buff *skb; ++ ++ skb = netdev_alloc_skb(priv->netdev, MAX_RX_LENGTH + NET_IP_ALIGN); ++ if (!skb) ++ return NULL; ++ ++ skb_reserve(skb, NET_IP_ALIGN); ++ ++ return skb; ++} ++ ++static int fe_alloc_rx(struct fe_priv *priv) ++{ ++ int size = NUM_DMA_DESC * sizeof(struct fe_rx_dma); ++ int i; ++ ++ priv->rx_dma = dma_alloc_coherent(&priv->netdev->dev, size, ++ &priv->rx_phys, GFP_ATOMIC); ++ if (!priv->rx_dma) ++ return -ENOMEM; ++ ++ memset(priv->rx_dma, 0, size); ++ ++ for (i = 0; i < NUM_DMA_DESC; i++) { ++ priv->rx_skb[i] = fe_alloc_skb(priv); ++ if (!priv->rx_skb[i]) ++ return -ENOMEM; ++ } ++ ++ for (i = 0; i < NUM_DMA_DESC; i++) { ++ dma_addr_t dma_addr = dma_map_single(&priv->netdev->dev, ++ priv->rx_skb[i]->data, ++ MAX_RX_LENGTH, ++ DMA_FROM_DEVICE); ++ priv->rx_dma[i].rxd1 = (unsigned int) dma_addr; ++ ++ if (priv->soc->rx_dma) ++ priv->soc->rx_dma(priv, i, MAX_RX_LENGTH); ++ else ++ priv->rx_dma[i].rxd2 = RX_DMA_LSO; ++ } ++ wmb(); ++ ++ fe_reg_w32(priv->rx_phys, FE_REG_RX_BASE_PTR0); ++ fe_reg_w32(NUM_DMA_DESC, FE_REG_RX_MAX_CNT0); ++ fe_reg_w32((NUM_DMA_DESC - 1), FE_REG_RX_CALC_IDX0); ++ fe_reg_w32(FE_PST_DRX_IDX0, FE_REG_PDMA_RST_CFG); ++ ++ return 0; ++} ++ ++static int fe_alloc_tx(struct fe_priv *priv) ++{ ++ int size = NUM_DMA_DESC * sizeof(struct fe_tx_dma); ++ int i; ++ ++ priv->tx_free_idx = 0; ++ ++ priv->tx_dma = dma_alloc_coherent(&priv->netdev->dev, size, ++ &priv->tx_phys, GFP_ATOMIC); ++ if (!priv->tx_dma) ++ return -ENOMEM; ++ ++ memset(priv->tx_dma, 0, size); ++ ++ for (i = 0; i < NUM_DMA_DESC; i++) { ++ if (priv->soc->tx_dma) { ++ priv->soc->tx_dma(priv, i, NULL); ++ continue; ++ } ++ ++ priv->tx_dma[i].txd2 = TX_DMA_LSO | TX_DMA_DONE; ++ priv->tx_dma[i].txd4 = TX_DMA_QN(3) | TX_DMA_PN(1); ++ } ++ ++ fe_reg_w32(priv->tx_phys, FE_REG_TX_BASE_PTR0); ++ fe_reg_w32(NUM_DMA_DESC, FE_REG_TX_MAX_CNT0); ++ fe_reg_w32(0, FE_REG_TX_CTX_IDX0); ++ fe_reg_w32(FE_PST_DTX_IDX0, FE_REG_PDMA_RST_CFG); ++ ++ return 0; ++} ++ ++static void fe_free_dma(struct fe_priv *priv) ++{ ++ int i; ++ ++ for (i = 0; i < NUM_DMA_DESC; i++) { ++ if (priv->rx_skb[i]) { ++ dma_unmap_single(&priv->netdev->dev, priv->rx_dma[i].rxd1, ++ MAX_RX_LENGTH, DMA_FROM_DEVICE); ++ dev_kfree_skb_any(priv->rx_skb[i]); ++ priv->rx_skb[i] = NULL; ++ } ++ ++ if (priv->tx_skb[i]) { ++ dev_kfree_skb_any(priv->tx_skb[i]); ++ priv->tx_skb[i] = NULL; ++ } ++ } ++ ++ if (priv->rx_dma) { ++ int size = NUM_DMA_DESC * sizeof(struct fe_rx_dma); ++ dma_free_coherent(&priv->netdev->dev, size, priv->rx_dma, ++ priv->rx_phys); ++ } ++ ++ if (priv->tx_dma) { ++ int size = NUM_DMA_DESC * sizeof(struct fe_tx_dma); ++ dma_free_coherent(&priv->netdev->dev, size, priv->tx_dma, ++ priv->tx_phys); ++ } ++ ++ netdev_reset_queue(priv->netdev); ++} ++ ++static void fe_start_tso(struct sk_buff *skb, struct net_device *dev, unsigned int nr_frags, int idx) ++{ ++ struct fe_priv *priv = netdev_priv(dev); ++ struct skb_frag_struct *frag; ++ int i; ++ ++ for (i = 0; i < nr_frags; i++) { ++ dma_addr_t mapped_addr; ++ ++ frag = &skb_shinfo(skb)->frags[i]; ++ mapped_addr = skb_frag_dma_map(&dev->dev, frag, 0, skb_frag_size(frag), DMA_TO_DEVICE); ++ if (i % 2) { ++ idx = (idx + 1) % NUM_DMA_DESC; ++ priv->tx_dma[idx].txd1 = mapped_addr; ++ if (i == nr_frags - 1) ++ priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(frag->size); ++ else ++ priv->tx_dma[idx].txd2 = TX_DMA_PLEN0(frag->size); ++ } else { ++ priv->tx_dma[idx].txd3 = mapped_addr; ++ if (i == nr_frags - 1) ++ priv->tx_dma[idx].txd2 |= TX_DMA_LS1 | TX_DMA_PLEN1(frag->size); ++ else ++ priv->tx_dma[idx].txd2 |= TX_DMA_PLEN1(frag->size); ++ } ++ } ++} ++ ++static int fe_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ unsigned int nr_frags = skb_shinfo(skb)->nr_frags; ++ struct fe_priv *priv = netdev_priv(dev); ++ dma_addr_t mapped_addr; ++ u32 tx_next, tx, tx_num = 1; ++ int i; ++ ++ if (priv->soc->min_pkt_len) { ++ if (skb->len < priv->soc->min_pkt_len) { ++ if (skb_padto(skb, priv->soc->min_pkt_len)) { ++ printk(KERN_ERR ++ "fe_eth: skb_padto failed\n"); ++ kfree_skb(skb); ++ return 0; ++ } ++ skb_put(skb, priv->soc->min_pkt_len - skb->len); ++ } ++ } ++ ++ dev->trans_start = jiffies; ++ mapped_addr = dma_map_single(&priv->netdev->dev, skb->data, ++ skb->len, DMA_TO_DEVICE); ++ ++ spin_lock(&priv->page_lock); ++ ++ tx = fe_reg_r32(FE_REG_TX_CTX_IDX0); ++ if (priv->soc->tso && nr_frags) ++ tx_num += nr_frags >> 1; ++ tx_next = (tx + tx_num) % NUM_DMA_DESC; ++ if ((priv->tx_skb[tx]) || (priv->tx_skb[tx_next]) || ++ !(priv->tx_dma[tx].txd2 & TX_DMA_DONE) || ++ !(priv->tx_dma[tx_next].txd2 & TX_DMA_DONE)) ++ { ++ spin_unlock(&priv->page_lock); ++ dev->stats.tx_dropped++; ++ kfree_skb(skb); ++ ++ return NETDEV_TX_OK; ++ } ++ ++ if (priv->soc->tso) { ++ int t = tx_num; ++ ++ priv->tx_skb[(tx + t - 1) % NUM_DMA_DESC] = skb; ++ while (--t) ++ priv->tx_skb[(tx + t - 1) % NUM_DMA_DESC] = (struct sk_buff *) DMA_DUMMY_DESC; ++ } else { ++ priv->tx_skb[tx] = skb; ++ } ++ priv->tx_dma[tx].txd1 = (unsigned int) mapped_addr; ++ wmb(); ++ ++ priv->tx_dma[tx].txd4 &= ~0x80; ++ if (priv->soc->tx_dma) ++ priv->soc->tx_dma(priv, tx, skb); ++ else ++ priv->tx_dma[tx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(skb->len); ++ ++ if (skb->ip_summed == CHECKSUM_PARTIAL) ++ priv->tx_dma[tx].txd4 |= TX_DMA_CHKSUM; ++ else ++ priv->tx_dma[tx].txd4 &= ~TX_DMA_CHKSUM; ++ ++ if (priv->soc->tso) ++ fe_start_tso(skb, dev, nr_frags, tx); ++ ++ if (priv->soc->tso && (skb_shinfo(skb)->gso_segs > 1)) { ++ struct iphdr *iph = NULL; ++ struct tcphdr *th = NULL; ++ struct ipv6hdr *ip6h = NULL; ++ ++ ip6h = (struct ipv6hdr *) skb_network_header(skb); ++ iph = (struct iphdr *) skb_network_header(skb); ++ if ((iph->version == 4) && (iph->protocol == IPPROTO_TCP)) { ++ th = (struct tcphdr *)skb_transport_header(skb); ++ priv->tx_dma[tx].txd4 |= BIT(28); ++ th->check = htons(skb_shinfo(skb)->gso_size); ++ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE); ++ } else if ((ip6h->version == 6) && (ip6h->nexthdr == NEXTHDR_TCP)) { ++ th = (struct tcphdr *)skb_transport_header(skb); ++ priv->tx_dma[tx].txd4 |= BIT(28); ++ th->check = htons(skb_shinfo(skb)->gso_size); ++ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE); ++ } ++ } ++ ++ for (i = 0; i < tx_num; i++) ++ dma_cache_sync(NULL, &priv->tx_dma[tx + i], sizeof(struct fe_tx_dma), DMA_TO_DEVICE); ++ ++ dev->stats.tx_packets++; ++ dev->stats.tx_bytes += skb->len; ++ ++ wmb(); ++ fe_reg_w32(tx_next, FE_REG_TX_CTX_IDX0); ++ netdev_sent_queue(dev, skb->len); ++ ++ spin_unlock(&priv->page_lock); ++ ++ return NETDEV_TX_OK; ++} ++ ++static int fe_poll_rx(struct napi_struct *napi, int budget) ++{ ++ struct fe_priv *priv = container_of(napi, struct fe_priv, rx_napi); ++ int idx = fe_reg_r32(FE_REG_RX_CALC_IDX0); ++ int complete = 0; ++ int rx = 0; ++ ++ while ((rx < budget) && !complete) { ++ idx = (idx + 1) % NUM_DMA_DESC; ++ ++ if (priv->rx_dma[idx].rxd2 & RX_DMA_DONE) { ++ struct sk_buff *new_skb = fe_alloc_skb(priv); ++ ++ if (new_skb) { ++ int pktlen = RX_DMA_PLEN0(priv->rx_dma[idx].rxd2); ++ dma_addr_t dma_addr; ++ ++ dma_unmap_single(&priv->netdev->dev, priv->rx_dma[idx].rxd1, ++ MAX_RX_LENGTH, DMA_FROM_DEVICE); ++ ++ skb_put(priv->rx_skb[idx], pktlen); ++ priv->rx_skb[idx]->dev = priv->netdev; ++ priv->rx_skb[idx]->protocol = eth_type_trans(priv->rx_skb[idx], priv->netdev); ++ if (priv->rx_dma[idx].rxd4 & priv->soc->checksum_bit) ++ priv->rx_skb[idx]->ip_summed = CHECKSUM_UNNECESSARY; ++ else ++ priv->rx_skb[idx]->ip_summed = CHECKSUM_NONE; ++ priv->netdev->stats.rx_packets++; ++ priv->netdev->stats.rx_bytes += pktlen; ++ ++#ifdef CONFIG_INET_LRO ++ if (priv->soc->get_skb_header && priv->rx_skb[idx]->ip_summed == CHECKSUM_UNNECESSARY) ++ lro_receive_skb(&priv->lro_mgr, priv->rx_skb[idx], NULL); ++ else ++#endif ++ netif_receive_skb(priv->rx_skb[idx]); ++ ++ priv->rx_skb[idx] = new_skb; ++ ++ dma_addr = dma_map_single(&priv->netdev->dev, ++ new_skb->data, ++ MAX_RX_LENGTH, ++ DMA_FROM_DEVICE); ++ priv->rx_dma[idx].rxd1 = (unsigned int) dma_addr; ++ wmb(); ++ } else { ++ priv->netdev->stats.rx_dropped++; ++ } ++ ++ if (priv->soc->rx_dma) ++ priv->soc->rx_dma(priv, idx, MAX_RX_LENGTH); ++ else ++ priv->rx_dma[idx].rxd2 = RX_DMA_LSO; ++ fe_reg_w32(idx, FE_REG_RX_CALC_IDX0); ++ ++ rx++; ++ } else { ++ complete = 1; ++ } ++ } ++ ++#ifdef CONFIG_INET_LRO ++ if (priv->soc->get_skb_header) ++ lro_flush_all(&priv->lro_mgr); ++#endif ++ if (complete) { ++ napi_complete(&priv->rx_napi); ++ fe_int_enable(priv->soc->rx_dly_int); ++ } ++ ++ return rx; ++} ++ ++static void fe_tx_housekeeping(unsigned long ptr) ++{ ++ struct net_device *dev = (struct net_device*)ptr; ++ struct fe_priv *priv = netdev_priv(dev); ++ unsigned int bytes_compl = 0; ++ unsigned int pkts_compl = 0; ++ ++ spin_lock(&priv->page_lock); ++ while (1) { ++ struct fe_tx_dma *txd; ++ ++ txd = &priv->tx_dma[priv->tx_free_idx]; ++ ++ if (!(txd->txd2 & TX_DMA_DONE) || !(priv->tx_skb[priv->tx_free_idx])) ++ break; ++ ++ if (priv->tx_skb[priv->tx_free_idx] != (struct sk_buff *) DMA_DUMMY_DESC) { ++ bytes_compl += priv->tx_skb[priv->tx_free_idx]->len; ++ dev_kfree_skb_irq(priv->tx_skb[priv->tx_free_idx]); ++ } ++ pkts_compl++; ++ priv->tx_skb[priv->tx_free_idx] = NULL; ++ priv->tx_free_idx++; ++ if (priv->tx_free_idx >= NUM_DMA_DESC) ++ priv->tx_free_idx = 0; ++ } ++ ++ netdev_completed_queue(priv->netdev, pkts_compl, bytes_compl); ++ spin_unlock(&priv->page_lock); ++ ++ fe_int_enable(priv->soc->tx_dly_int); ++} ++ ++static void fe_tx_timeout(struct net_device *dev) ++{ ++ struct fe_priv *priv = netdev_priv(dev); ++ ++ tasklet_schedule(&priv->tx_tasklet); ++ priv->netdev->stats.tx_errors++; ++ netdev_err(dev, "transmit timed out, waking up the queue\n"); ++ netif_wake_queue(dev); ++} ++ ++static irqreturn_t fe_handle_irq(int irq, void *dev) ++{ ++ struct fe_priv *priv = netdev_priv(dev); ++ unsigned int status; ++ unsigned int mask; ++ ++ status = fe_reg_r32(FE_REG_FE_INT_STATUS); ++ mask = fe_reg_r32(FE_REG_FE_INT_ENABLE); ++ ++ if (!(status & mask)) ++ return IRQ_NONE; ++ ++ if (status & priv->soc->rx_dly_int) { ++ fe_int_disable(priv->soc->rx_dly_int); ++ napi_schedule(&priv->rx_napi); ++ } ++ ++ if (status & priv->soc->tx_dly_int) { ++ fe_int_disable(priv->soc->tx_dly_int); ++ tasklet_schedule(&priv->tx_tasklet); ++ } ++ ++ fe_reg_w32(status, FE_REG_FE_INT_STATUS); ++ ++ return IRQ_HANDLED; ++} ++ ++static int fe_hw_init(struct net_device *dev) ++{ ++ struct fe_priv *priv = netdev_priv(dev); ++ int err; ++ ++ err = devm_request_irq(priv->device, dev->irq, fe_handle_irq, 0, ++ dev_name(priv->device), dev); ++ if (err) ++ return err; ++ ++ err = fe_alloc_rx(priv); ++ if (!err) ++ err = fe_alloc_tx(priv); ++ if (err) ++ return err; ++ ++ if (priv->soc->set_mac) ++ priv->soc->set_mac(priv, dev->dev_addr); ++ else ++ fe_hw_set_macaddr(priv, dev->dev_addr); ++ ++ fe_reg_w32(FE_DELAY_INIT, FE_REG_DLY_INT_CFG); ++ ++ fe_int_disable(priv->soc->tx_dly_int | priv->soc->rx_dly_int); ++ ++ tasklet_init(&priv->tx_tasklet, fe_tx_housekeeping, (unsigned long)dev); ++ ++ if (priv->soc->fwd_config) { ++ priv->soc->fwd_config(priv); ++ } else { ++ unsigned long sysclk = priv->sysclk; ++ ++ if (!sysclk) { ++ netdev_err(dev, "unable to get clock\n"); ++ return -EINVAL; ++ } ++ ++ sysclk /= FE_US_CYC_CNT_DIVISOR; ++ sysclk <<= FE_US_CYC_CNT_SHIFT; ++ ++ fe_w32((fe_r32(FE_FE_GLO_CFG) & ++ ~(FE_US_CYC_CNT_MASK << FE_US_CYC_CNT_SHIFT)) | sysclk, ++ FE_FE_GLO_CFG); ++ ++ fe_w32(fe_r32(FE_GDMA1_FWD_CFG) & ~0xffff, FE_GDMA1_FWD_CFG); ++ fe_w32(fe_r32(FE_GDMA1_FWD_CFG) | (FE_GDM1_ICS_EN | FE_GDM1_TCS_EN | FE_GDM1_UCS_EN), ++ FE_GDMA1_FWD_CFG); ++ fe_w32(fe_r32(FE_CDMA_CSG_CFG) | (FE_ICS_GEN_EN | FE_TCS_GEN_EN | FE_UCS_GEN_EN), ++ FE_CDMA_CSG_CFG); ++ fe_w32(FE_PSE_FQFC_CFG_INIT, FE_PSE_FQ_CFG); ++ } ++ ++ fe_w32(1, FE_FE_RST_GL); ++ fe_w32(0, FE_FE_RST_GL); ++ ++ return 0; ++} ++ ++static int fe_open(struct net_device *dev) ++{ ++ struct fe_priv *priv = netdev_priv(dev); ++ unsigned long flags; ++ u32 val; ++ ++ spin_lock_irqsave(&priv->page_lock, flags); ++ napi_enable(&priv->rx_napi); ++ ++ val = FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN; ++ val |= priv->soc->pdma_glo_cfg; ++ fe_reg_w32(val, FE_REG_PDMA_GLO_CFG); ++ ++ spin_unlock_irqrestore(&priv->page_lock, flags); ++ ++ if (priv->phy) ++ priv->phy->start(priv); ++ ++ if (priv->soc->has_carrier && priv->soc->has_carrier(priv)) ++ netif_carrier_on(dev); ++ ++ netif_start_queue(dev); ++ fe_int_enable(priv->soc->tx_dly_int | priv->soc->rx_dly_int); ++ ++ return 0; ++} ++ ++static int fe_stop(struct net_device *dev) ++{ ++ struct fe_priv *priv = netdev_priv(dev); ++ unsigned long flags; ++ ++ fe_int_disable(priv->soc->tx_dly_int | priv->soc->rx_dly_int); ++ ++ netif_stop_queue(dev); ++ ++ if (priv->phy) ++ priv->phy->stop(priv); ++ ++ spin_lock_irqsave(&priv->page_lock, flags); ++ napi_disable(&priv->rx_napi); ++ ++ fe_reg_w32(fe_reg_r32(FE_REG_PDMA_GLO_CFG) & ++ ~(FE_TX_WB_DDONE | FE_RX_DMA_EN | FE_TX_DMA_EN), ++ FE_REG_PDMA_GLO_CFG); ++ spin_unlock_irqrestore(&priv->page_lock, flags); ++ ++ return 0; ++} ++ ++static int __init fe_init(struct net_device *dev) ++{ ++ struct fe_priv *priv = netdev_priv(dev); ++ struct device_node *port; ++ int err; ++ ++ BUG_ON(!priv->soc->reset_fe); ++ priv->soc->reset_fe(); ++ ++ if (priv->soc->switch_init) ++ priv->soc->switch_init(priv); ++ ++ memcpy(dev->dev_addr, priv->soc->mac, ETH_ALEN); ++ of_get_mac_address_mtd(priv->device->of_node, dev->dev_addr); ++ ++ err = fe_mdio_init(priv); ++ if (err) ++ return err; ++ ++ if (priv->phy) { ++ err = priv->phy->connect(priv); ++ if (err) ++ goto err_mdio_cleanup; ++ } ++ ++ if (priv->soc->port_init) ++ for_each_child_of_node(priv->device->of_node, port) ++ if (of_device_is_compatible(port, "ralink,eth-port") && of_device_is_available(port)) ++ priv->soc->port_init(priv, port); ++ ++ err = fe_hw_init(dev); ++ if (err) ++ goto err_phy_disconnect; ++ ++ if (priv->soc->switch_config) ++ priv->soc->switch_config(priv); ++ ++ return 0; ++ ++err_phy_disconnect: ++ if (priv->phy) ++ priv->phy->disconnect(priv); ++err_mdio_cleanup: ++ fe_mdio_cleanup(priv); ++ ++ return err; ++} ++ ++static void fe_uninit(struct net_device *dev) ++{ ++ struct fe_priv *priv = netdev_priv(dev); ++ ++ tasklet_kill(&priv->tx_tasklet); ++ ++ if (priv->phy) ++ priv->phy->disconnect(priv); ++ fe_mdio_cleanup(priv); ++ ++ fe_reg_w32(0, FE_REG_FE_INT_ENABLE); ++ free_irq(dev->irq, dev); ++ ++ fe_free_dma(priv); ++} ++ ++static const struct net_device_ops fe_netdev_ops = { ++ .ndo_init = fe_init, ++ .ndo_uninit = fe_uninit, ++ .ndo_open = fe_open, ++ .ndo_stop = fe_stop, ++ .ndo_start_xmit = fe_start_xmit, ++ .ndo_tx_timeout = fe_tx_timeout, ++ .ndo_set_mac_address = fe_set_mac_address, ++ .ndo_change_mtu = eth_change_mtu, ++ .ndo_validate_addr = eth_validate_addr, ++}; ++ ++static int fe_probe(struct platform_device *pdev) ++{ ++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ const struct of_device_id *match; ++ struct fe_soc_data *soc = NULL; ++ struct net_device *netdev; ++ struct fe_priv *priv; ++ struct clk *sysclk; ++ int err; ++ ++ device_reset(&pdev->dev); ++ ++ match = of_match_device(of_fe_match, &pdev->dev); ++ soc = (struct fe_soc_data *) match->data; ++ ++ if (soc->init_data) ++ soc->init_data(soc); ++ if (soc->reg_table) ++ fe_reg_table = soc->reg_table; ++ ++ fe_base = devm_request_and_ioremap(&pdev->dev, res); ++ if (!fe_base) ++ return -ENOMEM; ++ ++ netdev = alloc_etherdev(sizeof(struct fe_priv)); ++ if (!netdev) { ++ dev_err(&pdev->dev, "alloc_etherdev failed\n"); ++ return -ENOMEM; ++ } ++ ++ strcpy(netdev->name, "eth%d"); ++ netdev->netdev_ops = &fe_netdev_ops; ++ netdev->base_addr = (unsigned long) fe_base; ++ netdev->watchdog_timeo = TX_TIMEOUT; ++ netdev->features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM; ++ ++ if (fe_reg_table[FE_REG_FE_DMA_VID_BASE]) ++ netdev->features |= NETIF_F_HW_VLAN_CTAG_TX; ++ ++ if (soc->tso) { ++ dev_info(&pdev->dev, "Enabling TSO\n"); ++ netdev->features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_IPV6_CSUM; ++ } ++ netdev->hw_features = netdev->features; ++ ++ netdev->irq = platform_get_irq(pdev, 0); ++ if (netdev->irq < 0) { ++ dev_err(&pdev->dev, "no IRQ resource found\n"); ++ kfree(netdev); ++ return -ENXIO; ++ } ++ ++ priv = netdev_priv(netdev); ++ memset(priv, 0, sizeof(struct fe_priv)); ++ spin_lock_init(&priv->page_lock); ++ ++ sysclk = devm_clk_get(&pdev->dev, NULL); ++ if (!IS_ERR(sysclk)) ++ priv->sysclk = clk_get_rate(sysclk); ++ ++ priv->netdev = netdev; ++ priv->device = &pdev->dev; ++ priv->soc = soc; ++ ++ err = register_netdev(netdev); ++ if (err) { ++ dev_err(&pdev->dev, "error bringing up device\n"); ++ kfree(netdev); ++ return err; ++ } ++ netif_napi_add(netdev, &priv->rx_napi, fe_poll_rx, 32); ++ ++#ifdef CONFIG_INET_LRO ++ if (priv->soc->get_skb_header) { ++ priv->lro_mgr.dev = netdev; ++ memset(&priv->lro_mgr.stats, 0, sizeof(priv->lro_mgr.stats)); ++ priv->lro_mgr.features = LRO_F_NAPI; ++ priv->lro_mgr.ip_summed = CHECKSUM_UNNECESSARY; ++ priv->lro_mgr.ip_summed_aggr = CHECKSUM_UNNECESSARY; ++ priv->lro_mgr.max_desc = ARRAY_SIZE(priv->lro_arr); ++ priv->lro_mgr.max_aggr = 64; ++ priv->lro_mgr.frag_align_pad = 0; ++ priv->lro_mgr.lro_arr = priv->lro_arr; ++ priv->lro_mgr.get_skb_header = priv->soc->get_skb_header; ++ } ++#endif ++ ++ platform_set_drvdata(pdev, netdev); ++ ++ netdev_info(netdev, "done loading\n"); ++ ++ return 0; ++} ++ ++static int fe_remove(struct platform_device *pdev) ++{ ++ struct net_device *dev = platform_get_drvdata(pdev); ++ struct fe_priv *priv = netdev_priv(dev); ++ ++ netif_stop_queue(dev); ++ netif_napi_del(&priv->rx_napi); ++ ++ unregister_netdev(dev); ++ free_netdev(dev); ++ ++ return 0; ++} ++ ++static struct platform_driver fe_driver = { ++ .probe = fe_probe, ++ .remove = fe_remove, ++ .driver = { ++ .name = "ralink_soc_eth", ++ .owner = THIS_MODULE, ++ .of_match_table = of_fe_match, ++ }, ++}; ++ ++static int __init init_rtfe(void) ++{ ++ int ret; ++ ++ ret = rtesw_init(); ++ if (ret) ++ return ret; ++ ++ ret = platform_driver_register(&fe_driver); ++ if (ret) ++ rtesw_exit(); ++ ++ return ret; ++} ++ ++static void __exit exit_rtfe(void) ++{ ++ platform_driver_unregister(&fe_driver); ++ rtesw_exit(); ++} ++ ++module_init(init_rtfe); ++module_exit(exit_rtfe); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); ++MODULE_DESCRIPTION("Ethernet driver for Ralink SoC"); +diff --git a/drivers/net/ethernet/ralink/ralink_soc_eth.h b/drivers/net/ethernet/ralink/ralink_soc_eth.h +new file mode 100644 +index 0000000..ca16788 +--- /dev/null ++++ b/drivers/net/ethernet/ralink/ralink_soc_eth.h +@@ -0,0 +1,384 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * based on Ralink SDK3.3 ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#ifndef FE_ETH_H ++#define FE_ETH_H ++ ++#include <linux/mii.h> ++#include <linux/interrupt.h> ++#include <linux/netdevice.h> ++#include <linux/dma-mapping.h> ++#include <linux/phy.h> ++#include <linux/inet_lro.h> ++ ++ ++enum fe_reg { ++ FE_REG_PDMA_GLO_CFG = 0, ++ FE_REG_PDMA_RST_CFG, ++ FE_REG_DLY_INT_CFG, ++ FE_REG_TX_BASE_PTR0, ++ FE_REG_TX_MAX_CNT0, ++ FE_REG_TX_CTX_IDX0, ++ FE_REG_RX_BASE_PTR0, ++ FE_REG_RX_MAX_CNT0, ++ FE_REG_RX_CALC_IDX0, ++ FE_REG_FE_INT_ENABLE, ++ FE_REG_FE_INT_STATUS, ++ FE_REG_FE_DMA_VID_BASE, ++ FE_REG_COUNT ++}; ++ ++#define NUM_DMA_DESC 0x100 ++ ++#define FE_DELAY_EN_INT 0x80 ++#define FE_DELAY_MAX_INT 0x04 ++#define FE_DELAY_MAX_TOUT 0x04 ++#define FE_DELAY_CHAN (((FE_DELAY_EN_INT | FE_DELAY_MAX_INT) << 8) | FE_DELAY_MAX_TOUT) ++#define FE_DELAY_INIT ((FE_DELAY_CHAN << 16) | FE_DELAY_CHAN) ++#define FE_PSE_FQFC_CFG_INIT 0x80504000 ++ ++/* interrupt bits */ ++#define FE_CNT_PPE_AF BIT(31) ++#define FE_CNT_GDM_AF BIT(29) ++#define FE_PSE_P2_FC BIT(26) ++#define FE_PSE_BUF_DROP BIT(24) ++#define FE_GDM_OTHER_DROP BIT(23) ++#define FE_PSE_P1_FC BIT(22) ++#define FE_PSE_P0_FC BIT(21) ++#define FE_PSE_FQ_EMPTY BIT(20) ++#define FE_GE1_STA_CHG BIT(18) ++#define FE_TX_COHERENT BIT(17) ++#define FE_RX_COHERENT BIT(16) ++#define FE_TX_DONE_INT3 BIT(11) ++#define FE_TX_DONE_INT2 BIT(10) ++#define FE_TX_DONE_INT1 BIT(9) ++#define FE_TX_DONE_INT0 BIT(8) ++#define FE_RX_DONE_INT0 BIT(2) ++#define FE_TX_DLY_INT BIT(1) ++#define FE_RX_DLY_INT BIT(0) ++ ++#define RT5350_RX_DLY_INT BIT(30) ++#define RT5350_TX_DLY_INT BIT(28) ++ ++/* registers */ ++#define FE_FE_OFFSET 0x0000 ++#define FE_GDMA_OFFSET 0x0020 ++#define FE_PSE_OFFSET 0x0040 ++#define FE_GDMA2_OFFSET 0x0060 ++#define FE_CDMA_OFFSET 0x0080 ++#define FE_DMA_VID0 0x00a8 ++#define FE_PDMA_OFFSET 0x0100 ++#define FE_PPE_OFFSET 0x0200 ++#define FE_CMTABLE_OFFSET 0x0400 ++#define FE_POLICYTABLE_OFFSET 0x1000 ++ ++#define RT5350_PDMA_OFFSET 0x0800 ++#define RT5350_SDM_OFFSET 0x0c00 ++ ++#define FE_MDIO_ACCESS (FE_FE_OFFSET + 0x00) ++#define FE_MDIO_CFG (FE_FE_OFFSET + 0x04) ++#define FE_FE_GLO_CFG (FE_FE_OFFSET + 0x08) ++#define FE_FE_RST_GL (FE_FE_OFFSET + 0x0C) ++#define FE_FE_INT_STATUS (FE_FE_OFFSET + 0x10) ++#define FE_FE_INT_ENABLE (FE_FE_OFFSET + 0x14) ++#define FE_MDIO_CFG2 (FE_FE_OFFSET + 0x18) ++#define FE_FOC_TS_T (FE_FE_OFFSET + 0x1C) ++ ++#define FE_GDMA1_FWD_CFG (FE_GDMA_OFFSET + 0x00) ++#define FE_GDMA1_SCH_CFG (FE_GDMA_OFFSET + 0x04) ++#define FE_GDMA1_SHPR_CFG (FE_GDMA_OFFSET + 0x08) ++#define FE_GDMA1_MAC_ADRL (FE_GDMA_OFFSET + 0x0C) ++#define FE_GDMA1_MAC_ADRH (FE_GDMA_OFFSET + 0x10) ++ ++#define FE_GDMA2_FWD_CFG (FE_GDMA2_OFFSET + 0x00) ++#define FE_GDMA2_SCH_CFG (FE_GDMA2_OFFSET + 0x04) ++#define FE_GDMA2_SHPR_CFG (FE_GDMA2_OFFSET + 0x08) ++#define FE_GDMA2_MAC_ADRL (FE_GDMA2_OFFSET + 0x0C) ++#define FE_GDMA2_MAC_ADRH (FE_GDMA2_OFFSET + 0x10) ++ ++#define FE_PSE_FQ_CFG (FE_PSE_OFFSET + 0x00) ++#define FE_CDMA_FC_CFG (FE_PSE_OFFSET + 0x04) ++#define FE_GDMA1_FC_CFG (FE_PSE_OFFSET + 0x08) ++#define FE_GDMA2_FC_CFG (FE_PSE_OFFSET + 0x0C) ++ ++#define FE_CDMA_CSG_CFG (FE_CDMA_OFFSET + 0x00) ++#define FE_CDMA_SCH_CFG (FE_CDMA_OFFSET + 0x04) ++ ++#define MT7620A_GDMA_OFFSET 0x0600 ++#define MT7620A_GDMA1_FWD_CFG (MT7620A_GDMA_OFFSET + 0x00) ++#define MT7620A_FE_GDMA1_SCH_CFG (MT7620A_GDMA_OFFSET + 0x04) ++#define MT7620A_FE_GDMA1_SHPR_CFG (MT7620A_GDMA_OFFSET + 0x08) ++#define MT7620A_FE_GDMA1_MAC_ADRL (MT7620A_GDMA_OFFSET + 0x0C) ++#define MT7620A_FE_GDMA1_MAC_ADRH (MT7620A_GDMA_OFFSET + 0x10) ++ ++#define RT5350_TX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x00) ++#define RT5350_TX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x04) ++#define RT5350_TX_CTX_IDX0 (RT5350_PDMA_OFFSET + 0x08) ++#define RT5350_TX_DTX_IDX0 (RT5350_PDMA_OFFSET + 0x0C) ++#define RT5350_TX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x10) ++#define RT5350_TX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x14) ++#define RT5350_TX_CTX_IDX1 (RT5350_PDMA_OFFSET + 0x18) ++#define RT5350_TX_DTX_IDX1 (RT5350_PDMA_OFFSET + 0x1C) ++#define RT5350_TX_BASE_PTR2 (RT5350_PDMA_OFFSET + 0x20) ++#define RT5350_TX_MAX_CNT2 (RT5350_PDMA_OFFSET + 0x24) ++#define RT5350_TX_CTX_IDX2 (RT5350_PDMA_OFFSET + 0x28) ++#define RT5350_TX_DTX_IDX2 (RT5350_PDMA_OFFSET + 0x2C) ++#define RT5350_TX_BASE_PTR3 (RT5350_PDMA_OFFSET + 0x30) ++#define RT5350_TX_MAX_CNT3 (RT5350_PDMA_OFFSET + 0x34) ++#define RT5350_TX_CTX_IDX3 (RT5350_PDMA_OFFSET + 0x38) ++#define RT5350_TX_DTX_IDX3 (RT5350_PDMA_OFFSET + 0x3C) ++#define RT5350_RX_BASE_PTR0 (RT5350_PDMA_OFFSET + 0x100) ++#define RT5350_RX_MAX_CNT0 (RT5350_PDMA_OFFSET + 0x104) ++#define RT5350_RX_CALC_IDX0 (RT5350_PDMA_OFFSET + 0x108) ++#define RT5350_RX_DRX_IDX0 (RT5350_PDMA_OFFSET + 0x10C) ++#define RT5350_RX_BASE_PTR1 (RT5350_PDMA_OFFSET + 0x110) ++#define RT5350_RX_MAX_CNT1 (RT5350_PDMA_OFFSET + 0x114) ++#define RT5350_RX_CALC_IDX1 (RT5350_PDMA_OFFSET + 0x118) ++#define RT5350_RX_DRX_IDX1 (RT5350_PDMA_OFFSET + 0x11C) ++#define RT5350_PDMA_GLO_CFG (RT5350_PDMA_OFFSET + 0x204) ++#define RT5350_PDMA_RST_CFG (RT5350_PDMA_OFFSET + 0x208) ++#define RT5350_DLY_INT_CFG (RT5350_PDMA_OFFSET + 0x20c) ++#define RT5350_FE_INT_STATUS (RT5350_PDMA_OFFSET + 0x220) ++#define RT5350_FE_INT_ENABLE (RT5350_PDMA_OFFSET + 0x228) ++#define RT5350_PDMA_SCH_CFG (RT5350_PDMA_OFFSET + 0x280) ++ ++#define FE_PDMA_GLO_CFG (FE_PDMA_OFFSET + 0x00) ++#define FE_PDMA_RST_CFG (FE_PDMA_OFFSET + 0x04) ++#define FE_PDMA_SCH_CFG (FE_PDMA_OFFSET + 0x08) ++#define FE_DLY_INT_CFG (FE_PDMA_OFFSET + 0x0C) ++#define FE_TX_BASE_PTR0 (FE_PDMA_OFFSET + 0x10) ++#define FE_TX_MAX_CNT0 (FE_PDMA_OFFSET + 0x14) ++#define FE_TX_CTX_IDX0 (FE_PDMA_OFFSET + 0x18) ++#define FE_TX_DTX_IDX0 (FE_PDMA_OFFSET + 0x1C) ++#define FE_TX_BASE_PTR1 (FE_PDMA_OFFSET + 0x20) ++#define FE_TX_MAX_CNT1 (FE_PDMA_OFFSET + 0x24) ++#define FE_TX_CTX_IDX1 (FE_PDMA_OFFSET + 0x28) ++#define FE_TX_DTX_IDX1 (FE_PDMA_OFFSET + 0x2C) ++#define FE_RX_BASE_PTR0 (FE_PDMA_OFFSET + 0x30) ++#define FE_RX_MAX_CNT0 (FE_PDMA_OFFSET + 0x34) ++#define FE_RX_CALC_IDX0 (FE_PDMA_OFFSET + 0x38) ++#define FE_RX_DRX_IDX0 (FE_PDMA_OFFSET + 0x3C) ++#define FE_TX_BASE_PTR2 (FE_PDMA_OFFSET + 0x40) ++#define FE_TX_MAX_CNT2 (FE_PDMA_OFFSET + 0x44) ++#define FE_TX_CTX_IDX2 (FE_PDMA_OFFSET + 0x48) ++#define FE_TX_DTX_IDX2 (FE_PDMA_OFFSET + 0x4C) ++#define FE_TX_BASE_PTR3 (FE_PDMA_OFFSET + 0x50) ++#define FE_TX_MAX_CNT3 (FE_PDMA_OFFSET + 0x54) ++#define FE_TX_CTX_IDX3 (FE_PDMA_OFFSET + 0x58) ++#define FE_TX_DTX_IDX3 (FE_PDMA_OFFSET + 0x5C) ++#define FE_RX_BASE_PTR1 (FE_PDMA_OFFSET + 0x60) ++#define FE_RX_MAX_CNT1 (FE_PDMA_OFFSET + 0x64) ++#define FE_RX_CALC_IDX1 (FE_PDMA_OFFSET + 0x68) ++#define FE_RX_DRX_IDX1 (FE_PDMA_OFFSET + 0x6C) ++ ++#define RT5350_SDM_CFG (RT5350_SDM_OFFSET + 0x00) //Switch DMA configuration ++#define RT5350_SDM_RRING (RT5350_SDM_OFFSET + 0x04) //Switch DMA Rx Ring ++#define RT5350_SDM_TRING (RT5350_SDM_OFFSET + 0x08) //Switch DMA Tx Ring ++#define RT5350_SDM_MAC_ADRL (RT5350_SDM_OFFSET + 0x0C) //Switch MAC address LSB ++#define RT5350_SDM_MAC_ADRH (RT5350_SDM_OFFSET + 0x10) //Switch MAC Address MSB ++#define RT5350_SDM_TPCNT (RT5350_SDM_OFFSET + 0x100) //Switch DMA Tx packet count ++#define RT5350_SDM_TBCNT (RT5350_SDM_OFFSET + 0x104) //Switch DMA Tx byte count ++#define RT5350_SDM_RPCNT (RT5350_SDM_OFFSET + 0x108) //Switch DMA rx packet count ++#define RT5350_SDM_RBCNT (RT5350_SDM_OFFSET + 0x10C) //Switch DMA rx byte count ++#define RT5350_SDM_CS_ERR (RT5350_SDM_OFFSET + 0x110) //Switch DMA rx checksum error count ++ ++#define RT5350_SDM_ICS_EN BIT(16) ++#define RT5350_SDM_TCS_EN BIT(17) ++#define RT5350_SDM_UCS_EN BIT(18) ++ ++ ++/* MDIO_CFG register bits */ ++#define FE_MDIO_CFG_AUTO_POLL_EN BIT(29) ++#define FE_MDIO_CFG_GP1_BP_EN BIT(16) ++#define FE_MDIO_CFG_GP1_FRC_EN BIT(15) ++#define FE_MDIO_CFG_GP1_SPEED_10 (0 << 13) ++#define FE_MDIO_CFG_GP1_SPEED_100 (1 << 13) ++#define FE_MDIO_CFG_GP1_SPEED_1000 (2 << 13) ++#define FE_MDIO_CFG_GP1_DUPLEX BIT(12) ++#define FE_MDIO_CFG_GP1_FC_TX BIT(11) ++#define FE_MDIO_CFG_GP1_FC_RX BIT(10) ++#define FE_MDIO_CFG_GP1_LNK_DWN BIT(9) ++#define FE_MDIO_CFG_GP1_AN_FAIL BIT(8) ++#define FE_MDIO_CFG_MDC_CLK_DIV_1 (0 << 6) ++#define FE_MDIO_CFG_MDC_CLK_DIV_2 (1 << 6) ++#define FE_MDIO_CFG_MDC_CLK_DIV_4 (2 << 6) ++#define FE_MDIO_CFG_MDC_CLK_DIV_8 (3 << 6) ++#define FE_MDIO_CFG_TURBO_MII_FREQ BIT(5) ++#define FE_MDIO_CFG_TURBO_MII_MODE BIT(4) ++#define FE_MDIO_CFG_RX_CLK_SKEW_0 (0 << 2) ++#define FE_MDIO_CFG_RX_CLK_SKEW_200 (1 << 2) ++#define FE_MDIO_CFG_RX_CLK_SKEW_400 (2 << 2) ++#define FE_MDIO_CFG_RX_CLK_SKEW_INV (3 << 2) ++#define FE_MDIO_CFG_TX_CLK_SKEW_0 0 ++#define FE_MDIO_CFG_TX_CLK_SKEW_200 1 ++#define FE_MDIO_CFG_TX_CLK_SKEW_400 2 ++#define FE_MDIO_CFG_TX_CLK_SKEW_INV 3 ++ ++/* uni-cast port */ ++#define FE_GDM1_ICS_EN BIT(22) ++#define FE_GDM1_TCS_EN BIT(21) ++#define FE_GDM1_UCS_EN BIT(20) ++#define FE_GDM1_JMB_EN BIT(19) ++#define FE_GDM1_STRPCRC BIT(16) ++#define FE_GDM1_UFRC_P_CPU (0 << 12) ++#define FE_GDM1_UFRC_P_GDMA1 (1 << 12) ++#define FE_GDM1_UFRC_P_PPE (6 << 12) ++ ++/* checksums */ ++#define FE_ICS_GEN_EN BIT(2) ++#define FE_UCS_GEN_EN BIT(1) ++#define FE_TCS_GEN_EN BIT(0) ++ ++/* dma ring */ ++#define FE_PST_DRX_IDX0 BIT(16) ++#define FE_PST_DTX_IDX3 BIT(3) ++#define FE_PST_DTX_IDX2 BIT(2) ++#define FE_PST_DTX_IDX1 BIT(1) ++#define FE_PST_DTX_IDX0 BIT(0) ++ ++#define FE_TX_WB_DDONE BIT(6) ++#define FE_RX_DMA_BUSY BIT(3) ++#define FE_TX_DMA_BUSY BIT(1) ++#define FE_RX_DMA_EN BIT(2) ++#define FE_TX_DMA_EN BIT(0) ++ ++#define FE_PDMA_SIZE_4DWORDS (0 << 4) ++#define FE_PDMA_SIZE_8DWORDS (1 << 4) ++#define FE_PDMA_SIZE_16DWORDS (2 << 4) ++ ++#define FE_US_CYC_CNT_MASK 0xff ++#define FE_US_CYC_CNT_SHIFT 0x8 ++#define FE_US_CYC_CNT_DIVISOR 1000000 ++ ++#define RX_DMA_PLEN0(_x) (((_x) >> 16) & 0x3fff) ++#define RX_DMA_LSO BIT(30) ++#define RX_DMA_DONE BIT(31) ++#define RX_DMA_L4VALID BIT(30) ++ ++struct fe_rx_dma { ++ unsigned int rxd1; ++ unsigned int rxd2; ++ unsigned int rxd3; ++ unsigned int rxd4; ++} __packed __aligned(4); ++ ++#define TX_DMA_PLEN0_MASK ((0x3fff) << 16) ++#define TX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16) ++#define TX_DMA_PLEN1(_x) ((_x) & 0x3fff) ++#define TX_DMA_LS1 BIT(14) ++#define TX_DMA_LSO BIT(30) ++#define TX_DMA_DONE BIT(31) ++#define TX_DMA_QN(_x) ((_x) << 16) ++#define TX_DMA_PN(_x) ((_x) << 24) ++#define TX_DMA_QN_MASK TX_DMA_QN(0x7) ++#define TX_DMA_PN_MASK TX_DMA_PN(0x7) ++#define TX_DMA_CHKSUM (0x7 << 29) ++ ++struct fe_tx_dma { ++ unsigned int txd1; ++ unsigned int txd2; ++ unsigned int txd3; ++ unsigned int txd4; ++} __packed __aligned(4); ++ ++struct fe_priv; ++ ++struct fe_phy { ++ struct phy_device *phy[8]; ++ struct device_node *phy_node[8]; ++ const __be32 *phy_fixed[8]; ++ int duplex[8]; ++ int speed[8]; ++ int tx_fc[8]; ++ int rx_fc[8]; ++ spinlock_t lock; ++ ++ int (*connect)(struct fe_priv *priv); ++ void (*disconnect)(struct fe_priv *priv); ++ void (*start)(struct fe_priv *priv); ++ void (*stop)(struct fe_priv *priv); ++}; ++ ++struct fe_soc_data ++{ ++ unsigned char mac[6]; ++ const u32 *reg_table; ++ ++ void (*init_data)(struct fe_soc_data *data); ++ void (*reset_fe)(void); ++ void (*set_mac)(struct fe_priv *priv, unsigned char *mac); ++ void (*fwd_config)(struct fe_priv *priv); ++ void (*tx_dma)(struct fe_priv *priv, int idx, struct sk_buff *skb); ++ void (*rx_dma)(struct fe_priv *priv, int idx, int len); ++ int (*switch_init)(struct fe_priv *priv); ++ int (*switch_config)(struct fe_priv *priv); ++ void (*port_init)(struct fe_priv *priv, struct device_node *port); ++ int (*has_carrier)(struct fe_priv *priv); ++ int (*mdio_init)(struct fe_priv *priv); ++ void (*mdio_cleanup)(struct fe_priv *priv); ++ int (*mdio_write)(struct mii_bus *bus, int phy_addr, int phy_reg, u16 val); ++ int (*mdio_read)(struct mii_bus *bus, int phy_addr, int phy_reg); ++ void (*mdio_adjust_link)(struct fe_priv *priv, int port); ++ int (*get_skb_header)(struct sk_buff *skb, void **iphdr, void **tcph, u64 *hdr_flags, void *priv); ++ ++ void *swpriv; ++ u32 pdma_glo_cfg; ++ u32 rx_dly_int; ++ u32 tx_dly_int; ++ u32 checksum_bit; ++ u32 tso; ++ ++ int min_pkt_len; ++}; ++ ++struct fe_priv ++{ ++ spinlock_t page_lock; ++ ++ struct fe_soc_data *soc; ++ struct net_device *netdev; ++ struct device *device; ++ unsigned long sysclk; ++ ++ struct fe_rx_dma *rx_dma; ++ struct napi_struct rx_napi; ++ struct sk_buff *rx_skb[NUM_DMA_DESC]; ++ dma_addr_t rx_phys; ++ ++ struct fe_tx_dma *tx_dma; ++ struct tasklet_struct tx_tasklet; ++ struct sk_buff *tx_skb[NUM_DMA_DESC]; ++ dma_addr_t tx_phys; ++ unsigned int tx_free_idx; ++ ++ struct fe_phy *phy; ++ struct mii_bus *mii_bus; ++ int mii_irq[PHY_MAX_ADDR]; ++ ++ int link[8]; ++ ++ struct net_lro_mgr lro_mgr; ++ struct net_lro_desc lro_arr[8]; ++}; ++ ++extern const struct of_device_id of_fe_match[]; ++ ++void fe_w32(u32 val, unsigned reg); ++u32 fe_r32(unsigned reg); ++ ++#endif /* FE_ETH_H */ +diff --git a/drivers/net/ethernet/ralink/soc_mt7620.c b/drivers/net/ethernet/ralink/soc_mt7620.c +new file mode 100644 +index 0000000..79b7b85 +--- /dev/null ++++ b/drivers/net/ethernet/ralink/soc_mt7620.c +@@ -0,0 +1,172 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/if_vlan.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++ ++#include <mt7620.h> ++#include "ralink_soc_eth.h" ++#include "gsw_mt7620a.h" ++ ++#define MT7620A_CDMA_CSG_CFG 0x400 ++#define MT7620_DMA_VID (MT7620A_CDMA_CSG_CFG | 0x30) ++#define MT7620A_DMA_2B_OFFSET BIT(31) ++#define MT7620A_RESET_FE BIT(21) ++#define MT7620A_RESET_ESW BIT(23) ++#define MT7620_L4_VALID BIT(23) ++ ++#define SYSC_REG_RESET_CTRL 0x34 ++#define MAX_RX_LENGTH 1536 ++ ++#define CDMA_ICS_EN BIT(2) ++#define CDMA_UCS_EN BIT(1) ++#define CDMA_TCS_EN BIT(0) ++ ++#define GDMA_ICS_EN BIT(22) ++#define GDMA_TCS_EN BIT(21) ++#define GDMA_UCS_EN BIT(20) ++ ++static const u32 rt5350_reg_table[FE_REG_COUNT] = { ++ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG, ++ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG, ++ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG, ++ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0, ++ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0, ++ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0, ++ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0, ++ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0, ++ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0, ++ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE, ++ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS, ++ [FE_REG_FE_DMA_VID_BASE] = MT7620_DMA_VID, ++}; ++ ++static void mt7620_fe_reset(void) ++{ ++ rt_sysc_w32(MT7620A_RESET_FE | MT7620A_RESET_ESW, SYSC_REG_RESET_CTRL); ++ rt_sysc_w32(0, SYSC_REG_RESET_CTRL); ++} ++ ++static void mt7620_fwd_config(struct fe_priv *priv) ++{ ++ int i; ++ ++ /* frame engine will push VLAN tag regarding to VIDX feild in Tx desc. */ ++ for (i = 0; i < 16; i += 2) ++ fe_w32(((i + 1) << 16) + i, MT7620_DMA_VID + (i * 2)); ++ ++ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) & ~7, MT7620A_GDMA1_FWD_CFG); ++ fe_w32(fe_r32(MT7620A_GDMA1_FWD_CFG) | (GDMA_ICS_EN | GDMA_TCS_EN | GDMA_UCS_EN), MT7620A_GDMA1_FWD_CFG); ++ fe_w32(fe_r32(MT7620A_CDMA_CSG_CFG) | (CDMA_ICS_EN | CDMA_UCS_EN | CDMA_TCS_EN), MT7620A_CDMA_CSG_CFG); ++} ++ ++static void mt7620_tx_dma(struct fe_priv *priv, int idx, struct sk_buff *skb) ++{ ++ unsigned int nr_frags = 0; ++ unsigned int len = 0; ++ ++ if (skb) { ++ nr_frags = skb_shinfo(skb)->nr_frags; ++ len = skb->len - skb->data_len; ++ } ++ ++ if (!skb) ++ priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_DONE; ++ else if (!nr_frags) ++ priv->tx_dma[idx].txd2 = TX_DMA_LSO | TX_DMA_PLEN0(len); ++ else ++ priv->tx_dma[idx].txd2 = TX_DMA_PLEN0(len); ++ ++ if(skb && vlan_tx_tag_present(skb)) ++ priv->tx_dma[idx].txd4 = 0x80 | (vlan_tx_tag_get(skb) >> 13) << 4 | (vlan_tx_tag_get(skb) & 0xF); ++ else ++ priv->tx_dma[idx].txd4 = 0; ++} ++ ++static void mt7620_rx_dma(struct fe_priv *priv, int idx, int len) ++{ ++ priv->rx_dma[idx].rxd2 = RX_DMA_PLEN0(len); ++} ++ ++#ifdef CONFIG_INET_LRO ++static int ++mt7620_get_skb_header(struct sk_buff *skb, void **iphdr, void **tcph, ++ u64 *hdr_flags, void *_priv) ++{ ++ struct iphdr *iph = NULL; ++ int vhdr_len = 0; ++ ++ /* ++ * Make sure that this packet is Ethernet II, is not VLAN ++ * tagged, is IPv4, has a valid IP header, and is TCP. ++ */ ++ if (skb->protocol == 0x0081) ++ vhdr_len = VLAN_HLEN; ++ ++ iph = (struct iphdr *)(skb->data + vhdr_len); ++ if(iph->protocol != IPPROTO_TCP) ++ return -1; ++ ++ *iphdr = iph; ++ *tcph = skb->data + (iph->ihl << 2) + vhdr_len; ++ *hdr_flags = LRO_IPV4 | LRO_TCP; ++ ++ return 0; ++} ++#endif ++ ++static void mt7620_init_data(struct fe_soc_data *data) ++{ ++ if (mt7620_get_eco() >= 5) ++ data->tso = 1; ++} ++ ++static struct fe_soc_data mt7620_data = { ++ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }, ++ .init_data = mt7620_init_data, ++ .reset_fe = mt7620_fe_reset, ++ .set_mac = mt7620_set_mac, ++ .fwd_config = mt7620_fwd_config, ++ .tx_dma = mt7620_tx_dma, ++ .rx_dma = mt7620_rx_dma, ++ .switch_init = mt7620_gsw_probe, ++ .switch_config = mt7620_gsw_config, ++ .port_init = mt7620_port_init, ++ .min_pkt_len = 0, ++ .reg_table = rt5350_reg_table, ++ .pdma_glo_cfg = FE_PDMA_SIZE_16DWORDS | MT7620A_DMA_2B_OFFSET, ++ .rx_dly_int = RT5350_RX_DLY_INT, ++ .tx_dly_int = RT5350_TX_DLY_INT, ++ .checksum_bit = MT7620_L4_VALID, ++ .has_carrier = mt7620a_has_carrier, ++ .mdio_read = mt7620_mdio_read, ++ .mdio_write = mt7620_mdio_write, ++ .mdio_adjust_link = mt7620_mdio_link_adjust, ++#ifdef CONFIG_INET_LRO ++ .get_skb_header = mt7620_get_skb_header, ++#endif ++}; ++ ++const struct of_device_id of_fe_match[] = { ++ { .compatible = "ralink,mt7620a-eth", .data = &mt7620_data }, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, of_fe_match); +diff --git a/drivers/net/ethernet/ralink/soc_rt2880.c b/drivers/net/ethernet/ralink/soc_rt2880.c +new file mode 100644 +index 0000000..e0c418b +--- /dev/null ++++ b/drivers/net/ethernet/ralink/soc_rt2880.c +@@ -0,0 +1,52 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/module.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++ ++#include "ralink_soc_eth.h" ++#include "mdio_rt2880.h" ++ ++#define SYSC_REG_RESET_CTRL 0x034 ++#define RT2880_RESET_FE BIT(18) ++ ++void rt2880_fe_reset(void) ++{ ++ rt_sysc_w32(RT2880_RESET_FE, SYSC_REG_RESET_CTRL); ++} ++ ++struct fe_soc_data rt2880_data = { ++ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }, ++ .reset_fe = rt2880_fe_reset, ++ .min_pkt_len = 64, ++ .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS, ++ .checksum_bit = RX_DMA_L4VALID, ++ .rx_dly_int = FE_RX_DLY_INT, ++ .tx_dly_int = FE_TX_DLY_INT, ++ .mdio_read = rt2880_mdio_read, ++ .mdio_write = rt2880_mdio_write, ++ .mdio_adjust_link = rt2880_mdio_link_adjust, ++ .port_init = rt2880_port_init, ++}; ++ ++const struct of_device_id of_fe_match[] = { ++ { .compatible = "ralink,rt2880-eth", .data = &rt2880_data }, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, of_fe_match); +diff --git a/drivers/net/ethernet/ralink/soc_rt305x.c b/drivers/net/ethernet/ralink/soc_rt305x.c +new file mode 100644 +index 0000000..482ca1f +--- /dev/null ++++ b/drivers/net/ethernet/ralink/soc_rt305x.c +@@ -0,0 +1,113 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/module.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++ ++#include "ralink_soc_eth.h" ++ ++#define RT305X_RESET_FE BIT(21) ++#define RT305X_RESET_ESW BIT(23) ++#define SYSC_REG_RESET_CTRL 0x034 ++ ++static const u32 rt5350_reg_table[FE_REG_COUNT] = { ++ [FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG, ++ [FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG, ++ [FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG, ++ [FE_REG_TX_BASE_PTR0] = RT5350_TX_BASE_PTR0, ++ [FE_REG_TX_MAX_CNT0] = RT5350_TX_MAX_CNT0, ++ [FE_REG_TX_CTX_IDX0] = RT5350_TX_CTX_IDX0, ++ [FE_REG_RX_BASE_PTR0] = RT5350_RX_BASE_PTR0, ++ [FE_REG_RX_MAX_CNT0] = RT5350_RX_MAX_CNT0, ++ [FE_REG_RX_CALC_IDX0] = RT5350_RX_CALC_IDX0, ++ [FE_REG_FE_INT_ENABLE] = RT5350_FE_INT_ENABLE, ++ [FE_REG_FE_INT_STATUS] = RT5350_FE_INT_STATUS, ++ [FE_REG_FE_DMA_VID_BASE] = 0, ++}; ++ ++static void rt305x_fe_reset(void) ++{ ++ rt_sysc_w32(RT305X_RESET_FE, SYSC_REG_RESET_CTRL); ++ rt_sysc_w32(0, SYSC_REG_RESET_CTRL); ++} ++ ++static void rt5350_set_mac(struct fe_priv *priv, unsigned char *mac) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&priv->page_lock, flags); ++ fe_w32((mac[0] << 8) | mac[1], RT5350_SDM_MAC_ADRH); ++ fe_w32((mac[2] << 24) | (mac[3] << 16) | (mac[4] << 8) | mac[5], ++ RT5350_SDM_MAC_ADRL); ++ spin_unlock_irqrestore(&priv->page_lock, flags); ++} ++ ++static void rt5350_fwd_config(struct fe_priv *priv) ++{ ++ unsigned long sysclk = priv->sysclk; ++ ++ if (sysclk) { ++ sysclk /= FE_US_CYC_CNT_DIVISOR; ++ sysclk <<= FE_US_CYC_CNT_SHIFT; ++ ++ fe_w32((fe_r32(FE_FE_GLO_CFG) & ++ ~(FE_US_CYC_CNT_MASK << FE_US_CYC_CNT_SHIFT)) | sysclk, ++ FE_FE_GLO_CFG); ++ } ++ ++ fe_w32(fe_r32(RT5350_SDM_CFG) & ~0xffff, RT5350_SDM_CFG); ++ fe_w32(fe_r32(RT5350_SDM_CFG) | RT5350_SDM_ICS_EN | RT5350_SDM_TCS_EN | RT5350_SDM_UCS_EN, ++ RT5350_SDM_CFG); ++} ++ ++static void rt5350_fe_reset(void) ++{ ++ rt_sysc_w32(RT305X_RESET_FE | RT305X_RESET_ESW, SYSC_REG_RESET_CTRL); ++ rt_sysc_w32(0, SYSC_REG_RESET_CTRL); ++} ++ ++static struct fe_soc_data rt3050_data = { ++ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }, ++ .reset_fe = rt305x_fe_reset, ++ .min_pkt_len = 64, ++ .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS, ++ .checksum_bit = RX_DMA_L4VALID, ++ .rx_dly_int = FE_RX_DLY_INT, ++ .tx_dly_int = FE_TX_DLY_INT, ++}; ++ ++static struct fe_soc_data rt5350_data = { ++ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }, ++ .reg_table = rt5350_reg_table, ++ .reset_fe = rt5350_fe_reset, ++ .set_mac = rt5350_set_mac, ++ .fwd_config = rt5350_fwd_config, ++ .min_pkt_len = 64, ++ .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS, ++ .checksum_bit = RX_DMA_L4VALID, ++ .rx_dly_int = RT5350_RX_DLY_INT, ++ .tx_dly_int = RT5350_TX_DLY_INT, ++}; ++ ++const struct of_device_id of_fe_match[] = { ++ { .compatible = "ralink,rt3050-eth", .data = &rt3050_data }, ++ { .compatible = "ralink,rt5350-eth", .data = &rt5350_data }, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, of_fe_match); +diff --git a/drivers/net/ethernet/ralink/soc_rt3883.c b/drivers/net/ethernet/ralink/soc_rt3883.c +new file mode 100644 +index 0000000..c660529c +--- /dev/null ++++ b/drivers/net/ethernet/ralink/soc_rt3883.c +@@ -0,0 +1,60 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; version 2 of the License ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2009-2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/module.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++ ++#include "ralink_soc_eth.h" ++#include "mdio_rt2880.h" ++ ++#define RT3883_SYSC_REG_RSTCTRL 0x34 ++#define RT3883_RSTCTRL_FE BIT(21) ++ ++static void rt3883_fe_reset(void) ++{ ++ u32 t; ++ ++ t = rt_sysc_r32(RT3883_SYSC_REG_RSTCTRL); ++ t |= RT3883_RSTCTRL_FE; ++ rt_sysc_w32(t , RT3883_SYSC_REG_RSTCTRL); ++ ++ t &= ~RT3883_RSTCTRL_FE; ++ rt_sysc_w32(t, RT3883_SYSC_REG_RSTCTRL); ++} ++ ++static struct fe_soc_data rt3883_data = { ++ .mac = { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55 }, ++ .reset_fe = rt3883_fe_reset, ++ .min_pkt_len = 64, ++ .pdma_glo_cfg = FE_PDMA_SIZE_4DWORDS, ++ .rx_dly_int = FE_RX_DLY_INT, ++ .tx_dly_int = FE_TX_DLY_INT, ++ .checksum_bit = RX_DMA_L4VALID, ++ .mdio_read = rt2880_mdio_read, ++ .mdio_write = rt2880_mdio_write, ++ .mdio_adjust_link = rt2880_mdio_link_adjust, ++ .port_init = rt2880_port_init, ++}; ++ ++const struct of_device_id of_fe_match[] = { ++ { .compatible = "ralink,rt3883-eth", .data = &rt3883_data }, ++ {}, ++}; ++ ++MODULE_DEVICE_TABLE(of, of_fe_match); ++ +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0036-NET-add-mt7621-ethernet-driver.patch b/target/linux/ramips/patches-3.14/0036-NET-add-mt7621-ethernet-driver.patch new file mode 100644 index 0000000000..02fc834020 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0036-NET-add-mt7621-ethernet-driver.patch @@ -0,0 +1,6134 @@ +From 810c2afe0c7e1be9352ad512b337110b100bfe3a Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 08:51:14 +0000 +Subject: [PATCH 36/57] NET: add mt7621 ethernet driver + +--- + arch/mips/include/asm/rt2880/board-custom.h | 153 +++ + arch/mips/include/asm/rt2880/eureka_ep430.h | 204 ++++ + arch/mips/include/asm/rt2880/generic.h | 42 + + arch/mips/include/asm/rt2880/lm.h | 32 + + arch/mips/include/asm/rt2880/prom.h | 50 + + arch/mips/include/asm/rt2880/rt_mmap.h | 796 ++++++++++++++++ + arch/mips/include/asm/rt2880/serial_rt2880.h | 443 +++++++++ + arch/mips/include/asm/rt2880/sizes.h | 52 + + arch/mips/include/asm/rt2880/surfboard.h | 70 ++ + arch/mips/include/asm/rt2880/surfboardint.h | 190 ++++ + arch/mips/include/asm/rt2880/war.h | 25 + + drivers/net/ethernet/Kconfig | 1 + + drivers/net/ethernet/Makefile | 1 + + drivers/net/ethernet/raeth/Kconfig | 344 +++++++ + drivers/net/ethernet/raeth/Makefile | 7 + + drivers/net/ethernet/raeth/ethtool_readme.txt | 44 + + drivers/net/ethernet/raeth/mii_mgr.c | 166 ++++ + drivers/net/ethernet/raeth/ra2882ethreg.h | 1268 +++++++++++++++++++++++++ + drivers/net/ethernet/raeth/ra_ioctl.h | 92 ++ + drivers/net/ethernet/raeth/ra_mac.c | 98 ++ + drivers/net/ethernet/raeth/ra_mac.h | 35 + + drivers/net/ethernet/raeth/raether.c | 693 ++++++++++++++ + drivers/net/ethernet/raeth/raether.h | 92 ++ + drivers/net/ethernet/raeth/raether_pdma.c | 212 +++++ + drivers/net/ethernet/raeth/raether_qdma.c | 805 ++++++++++++++++ + 25 files changed, 5915 insertions(+) + create mode 100644 arch/mips/include/asm/rt2880/board-custom.h + create mode 100644 arch/mips/include/asm/rt2880/eureka_ep430.h + create mode 100644 arch/mips/include/asm/rt2880/generic.h + create mode 100644 arch/mips/include/asm/rt2880/lm.h + create mode 100644 arch/mips/include/asm/rt2880/prom.h + create mode 100644 arch/mips/include/asm/rt2880/rt_mmap.h + create mode 100644 arch/mips/include/asm/rt2880/serial_rt2880.h + create mode 100644 arch/mips/include/asm/rt2880/sizes.h + create mode 100644 arch/mips/include/asm/rt2880/surfboard.h + create mode 100644 arch/mips/include/asm/rt2880/surfboardint.h + create mode 100644 arch/mips/include/asm/rt2880/war.h + create mode 100644 drivers/net/ethernet/raeth/Kconfig + create mode 100644 drivers/net/ethernet/raeth/Makefile + create mode 100644 drivers/net/ethernet/raeth/ethtool_readme.txt + create mode 100644 drivers/net/ethernet/raeth/mii_mgr.c + create mode 100644 drivers/net/ethernet/raeth/ra2882ethreg.h + create mode 100644 drivers/net/ethernet/raeth/ra_ioctl.h + create mode 100644 drivers/net/ethernet/raeth/ra_mac.c + create mode 100644 drivers/net/ethernet/raeth/ra_mac.h + create mode 100644 drivers/net/ethernet/raeth/raether.c + create mode 100644 drivers/net/ethernet/raeth/raether.h + create mode 100644 drivers/net/ethernet/raeth/raether_pdma.c + create mode 100644 drivers/net/ethernet/raeth/raether_qdma.c + +diff --git a/arch/mips/include/asm/rt2880/board-custom.h b/arch/mips/include/asm/rt2880/board-custom.h +new file mode 100644 +index 0000000..120e846 +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/board-custom.h +@@ -0,0 +1,153 @@ ++/* Copyright Statement: ++ * ++ * This software/firmware and related documentation ("MediaTek Software") are ++ * protected under relevant copyright laws. The information contained herein ++ * is confidential and proprietary to MediaTek Inc. and/or its licensors. ++ * Without the prior written permission of MediaTek inc. and/or its licensors, ++ * any reproduction, modification, use or disclosure of MediaTek Software, ++ * and information contained herein, in whole or in part, shall be strictly prohibited. ++ */ ++/* MediaTek Inc. (C) 2010. All rights reserved. ++ * ++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES ++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") ++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON ++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. ++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR ++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH ++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES ++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES ++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK ++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR ++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND ++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, ++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, ++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO ++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. ++ * ++ * The following software/firmware and/or related documentation ("MediaTek Software") ++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's ++ * applicable license agreements with MediaTek Inc. ++ */ ++ ++#ifndef __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H ++#define __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H ++ ++#include <linux/autoconf.h> ++ ++/*=======================================================================*/ ++/* MT6575 SD */ ++/*=======================================================================*/ ++#ifdef MTK_EMMC_SUPPORT ++#define CFG_DEV_MSDC0 ++#endif ++#define CFG_DEV_MSDC1 ++#define CFG_DEV_MSDC2 ++#define CFG_DEV_MSDC3 ++#if defined(CONFIG_MTK_COMBO) || defined(CONFIG_MTK_COMBO_MODULE) ++/* ++SDIO slot index number used by connectivity combo chip: ++0: invalid (used by memory card) ++1: MSDC1 ++2: MSDC2 ++*/ ++#define CONFIG_MTK_WCN_CMB_SDIO_SLOT (2) /* MSDC2 */ ++#else ++#undef CONFIG_MTK_WCN_CMB_SDIO_SLOT ++#endif ++ ++#if 0 /* FIXME. */ ++/*=======================================================================*/ ++/* MT6575 UART */ ++/*=======================================================================*/ ++#define CFG_DEV_UART1 ++#define CFG_DEV_UART2 ++#define CFG_DEV_UART3 ++#define CFG_DEV_UART4 ++ ++#define CFG_UART_PORTS (4) ++ ++/*=======================================================================*/ ++/* MT6575 I2C */ ++/*=======================================================================*/ ++#define CFG_DEV_I2C ++//#define CFG_I2C_HIGH_SPEED_MODE ++//#define CFG_I2C_DMA_MODE ++ ++/*=======================================================================*/ ++/* MT6575 ADB */ ++/*=======================================================================*/ ++#define ADB_SERIAL "E1K" ++ ++#endif ++ ++/*=======================================================================*/ ++/* MT6575 NAND FLASH */ ++/*=======================================================================*/ ++#if 0 ++#define RAMDOM_READ 1<<0 ++#define CACHE_READ 1<<1 ++/******************************************************************************* ++ * NFI & ECC Configuration ++ *******************************************************************************/ ++typedef struct ++{ ++ u16 id; //deviceid+menuid ++ u8 addr_cycle; ++ u8 iowidth; ++ u16 totalsize; ++ u16 blocksize; ++ u16 pagesize; ++ u32 timmingsetting; ++ char devciename[14]; ++ u32 advancedmode; // ++}flashdev_info,*pflashdev_info; ++ ++static const flashdev_info g_FlashTable[]={ ++ //micro ++ {0xAA2C, 5, 8, 256, 128, 2048, 0x01113, "MT29F2G08ABD", 0}, ++ {0xB12C, 4, 16, 128, 128, 2048, 0x01113, "MT29F1G16ABC", 0}, ++ {0xBA2C, 5, 16, 256, 128, 2048, 0x01113, "MT29F2G16ABD", 0}, ++ {0xAC2C, 5, 8, 512, 128, 2048, 0x01113, "MT29F4G08ABC", 0}, ++ {0xBC2C, 5, 16, 512, 128, 2048, 0x44333, "MT29F4G16ABD", 0}, ++ //samsung ++ {0xBAEC, 5, 16, 256, 128, 2048, 0x01123, "K522H1GACE", 0}, ++ {0xBCEC, 5, 16, 512, 128, 2048, 0x01123, "K524G2GACB", 0}, ++ {0xDAEC, 5, 8, 256, 128, 2048, 0x33222, "K9F2G08U0A", RAMDOM_READ}, ++ {0xF1EC, 4, 8, 128, 128, 2048, 0x01123, "K9F1G08U0A", RAMDOM_READ}, ++ {0xAAEC, 5, 8, 256, 128, 2048, 0x01123, "K9F2G08R0A", 0}, ++ //hynix ++ {0xD3AD, 5, 8, 1024, 256, 2048, 0x44333, "HY27UT088G2A", 0}, ++ {0xA1AD, 4, 8, 128, 128, 2048, 0x01123, "H8BCSOPJOMCP", 0}, ++ {0xBCAD, 5, 16, 512, 128, 2048, 0x01123, "H8BCSOUNOMCR", 0}, ++ {0xBAAD, 5, 16, 256, 128, 2048, 0x01123, "H8BCSOSNOMCR", 0}, ++ //toshiba ++ {0x9598, 5, 16, 816, 128, 2048, 0x00113, "TY9C000000CMG", 0}, ++ {0x9498, 5, 16, 375, 128, 2048, 0x00113, "TY9C000000CMG", 0}, ++ {0xC198, 4, 16, 128, 128, 2048, 0x44333, "TC58NWGOS8C", 0}, ++ {0xBA98, 5, 16, 256, 128, 2048, 0x02113, "TC58NYG1S8C", 0}, ++ //st-micro ++ {0xBA20, 5, 16, 256, 128, 2048, 0x01123, "ND02CGR4B2DI6", 0}, ++ ++ // elpida ++ {0xBC20, 5, 16, 512, 128, 2048, 0x01123, "04GR4B2DDI6", 0}, ++ {0x0000, 0, 0, 0, 0, 0, 0, "xxxxxxxxxxxxx", 0} ++}; ++#endif ++ ++ ++#define NFI_DEFAULT_ACCESS_TIMING (0x44333) ++ ++//uboot only support 1 cs ++#define NFI_CS_NUM (2) ++#define NFI_DEFAULT_CS (0) ++ ++#define USE_AHB_MODE (1) ++ ++#define PLATFORM_EVB (1) ++ ++#endif /* __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H */ ++ +diff --git a/arch/mips/include/asm/rt2880/eureka_ep430.h b/arch/mips/include/asm/rt2880/eureka_ep430.h +new file mode 100644 +index 0000000..e42a992 +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/eureka_ep430.h +@@ -0,0 +1,204 @@ ++/************************************************************************** ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * ++ ************************************************************************** ++ */ ++ ++#ifndef _EUREKA_EP430_H ++#define _EUREKA_EP430_H ++ ++ ++#include <asm/addrspace.h> /* for KSEG1ADDR() */ ++#include <asm/byteorder.h> /* for cpu_to_le32() */ ++#include <asm/mach-ralink/rt_mmap.h> ++ ++ ++/* ++ * Because of an error/peculiarity in the Galileo chip, we need to swap the ++ * bytes when running bigendian. ++ */ ++ ++#define MV_WRITE(ofs, data) \ ++ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data) ++#define MV_READ(ofs, data) \ ++ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs))) ++#define MV_READ_DATA(ofs) \ ++ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs))) ++ ++#define MV_WRITE_16(ofs, data) \ ++ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data) ++#define MV_READ_16(ofs, data) \ ++ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs))) ++ ++#define MV_WRITE_8(ofs, data) \ ++ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data ++#define MV_READ_8(ofs, data) \ ++ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) ++ ++#define MV_SET_REG_BITS(ofs,bits) \ ++ (*((volatile u32 *)(RALINK_PCI_BASE+(ofs)))) |= ((u32)cpu_to_le32(bits)) ++#define MV_RESET_REG_BITS(ofs,bits) \ ++ (*((volatile u32 *)(RALINK_PCI_BASE+(ofs)))) &= ~((u32)cpu_to_le32(bits)) ++ ++#define RALINK_PCI_CONFIG_ADDR 0x20 ++#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24 ++ ++#if defined(CONFIG_RALINK_RT2880) || defined(CONFIG_RALINK_RT2883) ++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000) ++#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004) ++#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008) ++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C) ++#define RALINK_PCI_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0010) ++#define RALINK_PCI_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0018) ++#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C) ++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028) ++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C) ++#define RALINK_PCI_ID *(volatile u32 *)(RALINK_PCI_BASE + 0x0030) ++#define RALINK_PCI_CLASS *(volatile u32 *)(RALINK_PCI_BASE + 0x0034) ++#define RALINK_PCI_SUBID *(volatile u32 *)(RALINK_PCI_BASE + 0x0038) ++#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080) ++#define RALINK_PCI_STATUS *(volatile u32 *)(RALINK_PCI_BASE + 0x0050) ++ ++#elif defined(CONFIG_RALINK_RT3883) ++ ++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000) ++#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004) ++#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008) ++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C) ++#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C) ++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028) ++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C) ++#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080) ++ ++/* ++PCI0 --> PCI ++PCI1 --> PCIe ++*/ ++#define RT3883_PCI_OFFSET 0x1000 ++#define RT3883_PCIE_OFFSET 0x2000 ++ ++#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0010) ++#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0018) ++#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0030) ++#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0034) ++#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0038) ++ ++#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0010) ++#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0018) ++#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0030) ++#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0034) ++#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0038) ++#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0050) ++ ++#elif defined(CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7628) ++ ++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000) ++#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004) ++#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008) ++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C) ++#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C) ++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028) ++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C) ++#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080) ++ ++/* ++PCI0 --> PCIe 0 ++PCI1 --> PCIe 1 ++*/ ++#define RT6855_PCIE0_OFFSET 0x2000 ++#define RT6855_PCIE1_OFFSET 0x3000 ++ ++#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010) ++#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018) ++#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030) ++#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034) ++#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038) ++#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050) ++#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060) ++#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064) ++ ++#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010) ++#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018) ++#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030) ++#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034) ++#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038) ++#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050) ++#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060) ++#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064) ++ ++#elif defined (CONFIG_RALINK_MT7621) ++ ++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000) ++#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004) ++#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008) ++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C) ++#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C) ++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028) ++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C) ++#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080) ++ ++/* ++PCI0 --> PCIe 0 ++PCI1 --> PCIe 1 ++PCI2 --> PCIe 2 ++*/ ++#define RT6855_PCIE0_OFFSET 0x2000 ++#define RT6855_PCIE1_OFFSET 0x3000 ++#define RT6855_PCIE2_OFFSET 0x4000 ++ ++#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010) ++#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018) ++#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030) ++#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034) ++#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038) ++#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050) ++#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060) ++#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064) ++ ++#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010) ++#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018) ++#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030) ++#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034) ++#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038) ++#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050) ++#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060) ++#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064) ++ ++#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010) ++#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018) ++#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030) ++#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034) ++#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038) ++#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050) ++#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060) ++#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064) ++ ++#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000) ++#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000) ++ ++#elif defined(CONFIG_RALINK_RT3052) || defined(CONFIG_RALINK_RT3352) || defined(CONFIG_RALINK_RT5350) ++#else ++#error "undefined in PCI" ++#endif ++ ++#endif +diff --git a/arch/mips/include/asm/rt2880/generic.h b/arch/mips/include/asm/rt2880/generic.h +new file mode 100644 +index 0000000..4128f91 +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/generic.h +@@ -0,0 +1,42 @@ ++/* ++ * Copyright (C) 2001 Palmchip Corporation. All rights reserved. ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ * ++ * Defines of the Palmchip boards specific address-MAP, registers, etc. ++ */ ++#ifndef __ASM_SURFBOARD_GENERIC_H ++#define __ASM_SURFBOARD_GENERIC_H ++ ++#include <asm/addrspace.h> ++#include <asm/byteorder.h> ++#include <asm/mach-ralink/rt_mmap.h> ++ ++/* ++ * Reset register. ++ */ ++#define SOFTRES_REG (KSEG1ADDR(RALINK_SYSCTL_BASE+0x34)) ++#define GORESET (0x1) ++ ++/* ++ * Power-off register ++ */ ++#define POWER_DIR_REG (KSEG1ADDR(RALINK_PIO_BASE+0x24)) ++#define POWER_DIR_OUTPUT (0x80) /* GPIO 7 */ ++#define POWER_POL_REG (KSEG1ADDR(RALINK_PIO_BASE+0x28)) ++#define POWEROFF_REG (KSEG1ADDR(RALINK_PIO_BASE+0x20)) ++#define POWEROFF (0x0) /* drive low */ ++ ++ ++#endif /* __ASM_SURFBOARD_GENERIC_H */ +diff --git a/arch/mips/include/asm/rt2880/lm.h b/arch/mips/include/asm/rt2880/lm.h +new file mode 100644 +index 0000000..25e2930 +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/lm.h +@@ -0,0 +1,32 @@ ++#include <linux/version.h> ++ ++struct lm_device { ++ struct device dev; ++ struct resource resource; ++ unsigned int irq; ++ unsigned int id; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ void *lm_drvdata; ++#endif ++}; ++ ++struct lm_driver { ++ struct device_driver drv; ++ int (*probe)(struct lm_device *); ++ void (*remove)(struct lm_device *); ++ int (*suspend)(struct lm_device *, u32); ++ int (*resume)(struct lm_device *); ++}; ++ ++int lm_driver_register(struct lm_driver *drv); ++void lm_driver_unregister(struct lm_driver *drv); ++ ++int lm_device_register(struct lm_device *dev); ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++# define lm_get_drvdata(lm) ((lm)->lm_drvdata) ++# define lm_set_drvdata(lm,d) do { (lm)->lm_drvdata = (d); } while (0) ++#else ++# define lm_get_drvdata(lm) dev_get_drvdata(&(lm)->dev) ++# define lm_set_drvdata(lm,d) dev_set_drvdata(&(lm)->dev, d) ++#endif +diff --git a/arch/mips/include/asm/rt2880/prom.h b/arch/mips/include/asm/rt2880/prom.h +new file mode 100644 +index 0000000..51be9b0 +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/prom.h +@@ -0,0 +1,50 @@ ++/* ++ * Carsten Langgaard, carstenl@mips.com ++ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. ++ * ++ * ######################################################################## ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ * ++ * ######################################################################## ++ * ++ * MIPS boards bootprom interface for the Linux kernel. ++ * ++ */ ++ ++#ifndef _MIPS_PROM_H ++#define _MIPS_PROM_H ++ ++extern char *prom_getcmdline(void); ++extern char *prom_getenv(char *name); ++extern void setup_prom_printf(int tty_no); ++extern void prom_setup_printf(int tty_no); ++extern void prom_printf(char *fmt, ...); ++extern void prom_init_cmdline(void); ++extern void prom_meminit(void); ++extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); ++extern void prom_free_prom_memory (void); ++extern void mips_display_message(const char *str); ++extern void mips_display_word(unsigned int num); ++extern int get_ethernet_addr(char *ethernet_addr); ++ ++/* Memory descriptor management. */ ++#define PROM_MAX_PMEMBLOCKS 32 ++struct prom_pmemblock { ++ unsigned long base; /* Within KSEG0. */ ++ unsigned int size; /* In bytes. */ ++ unsigned int type; /* free or prom memory */ ++}; ++ ++#endif /* !(_MIPS_PROM_H) */ +diff --git a/arch/mips/include/asm/rt2880/rt_mmap.h b/arch/mips/include/asm/rt2880/rt_mmap.h +new file mode 100644 +index 0000000..0e8f051 +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/rt_mmap.h +@@ -0,0 +1,796 @@ ++/************************************************************************** ++ * ++ * BRIEF MODULE DESCRIPTION ++ * register definition for Ralink RT-series SoC ++ * ++ * Copyright 2007 Ralink Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * ++ ************************************************************************** ++ */ ++ ++#ifndef __RALINK_MMAP__ ++#define __RALINK_MMAP__ ++ ++#if defined (CONFIG_RALINK_RT2880_SHUTTLE) ++ ++#define RALINK_SYSCTL_BASE 0xA0300000 ++#define RALINK_TIMER_BASE 0xA0300100 ++#define RALINK_INTCL_BASE 0xA0300200 ++#define RALINK_MEMCTRL_BASE 0xA0300300 ++#define RALINK_UART_BASE 0xA0300500 ++#define RALINK_PIO_BASE 0xA0300600 ++#define RALINK_I2C_BASE 0xA0300900 ++#define RALINK_SPI_BASE 0xA0300B00 ++#define RALINK_UART_LITE_BASE 0xA0300C00 ++#define RALINK_FRAME_ENGINE_BASE 0xA0310000 ++#define RALINK_EMBEDD_ROM_BASE 0xA0400000 ++#define RALINK_PCI_BASE 0xA0500000 ++#define RALINK_11N_MAC_BASE 0xA0600000 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_TIMER0 (1<<0) ++#define RALINK_INTCTL_WDTIMER (1<<1) ++#define RALINK_INTCTL_UART (1<<2) ++#define RALINK_INTCTL_PIO (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UARTLITE (1<<8) ++#define RALINK_INTCTL_ILL_ACCESS (1<<23) ++ ++//Reset Control Register ++#define RALINK_TIMER_RST (1<<1) ++#define RALINK_INTC_RST (1<<2) ++#define RALINK_MC_RST (1<<3) ++#define RALINK_CPU_RST (1<<4) ++#define RALINK_UART_RST (1<<5) ++#define RALINK_PIO_RST (1<<6) ++#define RALINK_I2C_RST (1<<9) ++#define RALINK_SPI_RST (1<<11) ++#define RALINK_UART2_RST (1<<12) ++#define RALINK_PCI_RST (1<<16) ++#define RALINK_2860_RST (1<<17) ++#define RALINK_FE_RST (1<<18) ++#define RALINK_PCM_RST (1<<19) ++ ++ ++#elif defined (CONFIG_RALINK_RT2880_MP) ++ ++#define RALINK_SYSCTL_BASE 0xA0300000 ++#define RALINK_TIMER_BASE 0xA0300100 ++#define RALINK_INTCL_BASE 0xA0300200 ++#define RALINK_MEMCTRL_BASE 0xA0300300 ++#define RALINK_UART_BASE 0xA0300500 ++#define RALINK_PIO_BASE 0xA0300600 ++#define RALINK_I2C_BASE 0xA0300900 ++#define RALINK_SPI_BASE 0xA0300B00 ++#define RALINK_UART_LITE_BASE 0x00300C00 ++#define RALINK_FRAME_ENGINE_BASE 0xA0400000 ++#define RALINK_EMBEDD_ROM_BASE 0xA0410000 ++#define RALINK_PCI_BASE 0xA0440000 ++#define RALINK_11N_MAC_BASE 0xA0480000 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_TIMER0 (1<<0) ++#define RALINK_INTCTL_WDTIMER (1<<1) ++#define RALINK_INTCTL_UART (1<<2) ++#define RALINK_INTCTL_PIO (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UARTLITE (1<<8) ++#define RALINK_INTCTL_ILL_ACCESS (1<<23) ++ ++//Reset Control Register ++#define RALINK_TIMER_RST (1<<1) ++#define RALINK_INTC_RST (1<<2) ++#define RALINK_MC_RST (1<<3) ++#define RALINK_CPU_RST (1<<4) ++#define RALINK_UART_RST (1<<5) ++#define RALINK_PIO_RST (1<<6) ++#define RALINK_I2C_RST (1<<9) ++#define RALINK_SPI_RST (1<<11) ++#define RALINK_UART2_RST (1<<12) ++#define RALINK_PCI_RST (1<<16) ++#define RALINK_2860_RST (1<<17) ++#define RALINK_FE_RST (1<<18) ++#define RALINK_PCM_RST (1<<19) ++ ++#elif defined (CONFIG_RALINK_RT3052) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_PCM_BASE 0xB0000400 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_GDMA_BASE 0xB0000700 ++#define RALINK_NAND_CTRL_BASE 0xB0000800 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_ETH_SW_BASE 0xB0110000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_OTG_BASE 0x101C0000 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_NAND (1<<8) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_ESW (1<<17) ++#define RALINK_INTCTL_OTG (1<<18) ++#define RALINK_INTCTL_OTG_IRQN 18 ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_CPU_RST (1<<1) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_RT2872_RST (1<<20) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_OTG_RST (1<<22) ++#define RALINK_SW_RST (1<<23) ++#define RALINK_EPHY_RST (1<<24) ++ ++#elif defined (CONFIG_RALINK_RT3352) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_NAND_CTRL_BASE 0xB0000800 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_PCM_BASE 0xB0002000 ++#define RALINK_GDMA_BASE 0xB0002800 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_ETH_SW_BASE 0xB0110000 ++#define RALINK_USB_DEV_BASE 0x10120000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_HOST_BASE 0x101C0000 ++ ++#define RALINK_MCNT_CFG 0xB0000D00 ++#define RALINK_COMPARE 0xB0000D04 ++#define RALINK_COUNT 0xB0000D08 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_ESW (1<<17) ++#define RALINK_INTCTL_OTG (1<<18) ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_WLAN_RST (1<<20) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_UHST_RST (1<<22) ++#define RALINK_ESW_RST (1<<23) ++#define RALINK_EPHY_RST (1<<24) ++#define RALINK_UDEV_RST (1<<25) ++ ++ ++//Clock Conf Register ++#define RALINK_UPHY1_CLK_EN (1<<20) ++#define RALINK_UPHY0_CLK_EN (1<<18) ++#define RALINK_GE1_CLK_EN (1<<16) ++ ++ ++#elif defined (CONFIG_RALINK_RT5350) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_PCM_BASE 0xB0002000 ++#define RALINK_GDMA_BASE 0xB0002800 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_ETH_SW_BASE 0xB0110000 ++#define RALINK_USB_DEV_BASE 0x10120000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_HOST_BASE 0x101C0000 ++ ++#define RALINK_MCNT_CFG 0xB0000D00 ++#define RALINK_COMPARE 0xB0000D04 ++#define RALINK_COUNT 0xB0000D08 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_ESW (1<<17) ++#define RALINK_INTCTL_USB_HOST (1<<18) ++#define RALINK_INTCTL_USB_DEV (1<<19) ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_WLAN_RST (1<<20) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_UHST_RST (1<<22) ++#define RALINK_ESW_RST (1<<23) ++#define RALINK_EPHY_RST (1<<24) ++#define RALINK_UDEV_RST (1<<25) ++#define RALINK_MIPSC_RST (1<<28) ++ ++//Clock Conf Register ++#define RALINK_UPHY0_CLK_EN (1<<18) ++#define RALINK_GE1_CLK_EN (1<<16) ++ ++#elif defined (CONFIG_RALINK_RT2883) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_PCM_BASE 0xB0000400 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_GDMA_BASE 0xB0000700 ++#define RALINK_NAND_CTRL_BASE 0xB0000800 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_PCI_BASE 0xB0140000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_OTG_BASE 0x101C0000 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_NAND (1<<8) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_OTG (1<<18) ++#define RALINK_INTCTL_OTG_IRQN 18 ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_CPU_RST (1<<1) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_WLAN_RST (1<<20) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_OTG_RST (1<<22) ++#define RALINK_PCIE_RST (1<<23) ++ ++#elif defined (CONFIG_RALINK_RT3883) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_NOR_CTRL_BASE 0xB0000700 ++#define RALINK_NAND_CTRL_BASE 0xB0000810 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_PCM_BASE 0xB0002000 ++#define RALINK_GDMA_BASE 0xB0002800 ++#define RALINK_CODEC1_BASE 0xB0003000 ++#define RALINK_CODEC2_BASE 0xB0003800 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_USB_DEV_BASE 0x10120000 ++#define RALINK_PCI_BASE 0xB0140000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_HOST_BASE 0x101C0000 ++#define RALINK_PCIE_BASE 0xB0200000 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_NAND (1<<8) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_UHST (1<<18) ++#define RALINK_INTCTL_UDEV (1<<19) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_NAND_RST (1<<15) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_WLAN_RST (1<<20) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_UHST_RST (1<<22) ++#define RALINK_PCIE_RST (1<<23) ++#define RALINK_PCI_RST (1<<24) ++#define RALINK_UDEV_RST (1<<25) ++#define RALINK_FLASH_RST (1<<26) ++ ++//Clock Conf Register ++#define RALINK_UPHY1_CLK_EN (1<<20) ++#define RALINK_UPHY0_CLK_EN (1<<18) ++#define RALINK_GE1_CLK_EN (1<<16) ++ ++#elif defined (CONFIG_RALINK_RT6855) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_NAND_CTRL_BASE 0xB0000800 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_PCM_BASE 0xB0002000 ++#define RALINK_GDMA_BASE 0xB0002800 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_ETH_SW_BASE 0xB0110000 ++#define RALINK_PCI_BASE 0xB0140000 ++#define RALINK_USB_DEV_BASE 0x10120000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_HOST_BASE 0x101C0000 ++ ++#define RALINK_MCNT_CFG 0xB0000D00 ++#define RALINK_COMPARE 0xB0000D04 ++#define RALINK_COUNT 0xB0000D08 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_ESW (1<<17) ++#define RALINK_INTCTL_OTG (1<<18) ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_UHST_RST (1<<22) ++#define RALINK_ESW_RST (1<<23) ++#define RALINK_EPHY_RST (1<<24) ++#define RALINK_UDEV_RST (1<<25) ++#define RALINK_PCIE0_RST (1<<26) ++#define RALINK_PCIE1_RST (1<<27) ++ ++//Clock Conf Register ++#define RALINK_UPHY0_CLK_EN (1<<25) ++#define RALINK_PCIE0_CLK_EN (1<<26) ++#define RALINK_PCIE1_CLK_EN (1<<27) ++ ++ ++#elif defined (CONFIG_RALINK_MT7620) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_RBUS_MATRIXCTL_BASE 0xB0000400 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_NAND_CTRL_BASE 0xB0000810 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_MIPS_CNT_BASE 0x10000D00 ++#define RALINK_PCM_BASE 0xB0002000 ++#define RALINK_GDMA_BASE 0xB0002800 ++#define RALINK_CRYPTO_ENGINE_BASE 0xB0004000 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_PPE_BASE 0xB0100C00 ++#define RALINK_ETH_SW_BASE 0xB0110000 ++#define RALINK_USB_DEV_BASE 0x10120000 ++#define RALINK_MSDC_BASE 0xB0130000 ++#define RALINK_PCI_BASE 0xB0140000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_HOST_BASE 0x101C0000 ++ ++#define RALINK_MCNT_CFG 0xB0000D00 ++#define RALINK_COMPARE 0xB0000D04 ++#define RALINK_COUNT 0xB0000D08 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_SPI (1<<11) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_CRYPTO (1<<13) ++#define RALINK_INTCTL_ESW (1<<17) ++#define RALINK_INTCTL_UHST (1<<18) ++#define RALINK_INTCTL_UDEV (1<<19) ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_UHST_RST (1<<22) ++#define RALINK_ESW_RST (1<<23) ++#define RALINK_EPHY_RST (1<<24) ++#define RALINK_UDEV_RST (1<<25) ++#define RALINK_PCIE0_RST (1<<26) ++#define RALINK_PCIE1_RST (1<<27) ++#define RALINK_MIPS_CNT_RST (1<<28) ++#define RALINK_CRYPTO_RST (1<<29) ++ ++//Clock Conf Register ++#define RALINK_UPHY0_CLK_EN (1<<25) ++#define RALINK_UPHY1_CLK_EN (1<<22) ++#define RALINK_PCIE0_CLK_EN (1<<26) ++#define RALINK_PCIE1_CLK_EN (1<<27) ++ ++//CPU PLL CFG Register ++#define CPLL_SW_CONFIG (0x1UL << 31) ++#define CPLL_MULT_RATIO_SHIFT 16 ++#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT) ++#define CPLL_DIV_RATIO_SHIFT 10 ++#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT) ++#define BASE_CLOCK 40 /* Mhz */ ++ ++#elif defined (CONFIG_RALINK_MT7621) ++ ++#define RALINK_SYSCTL_BASE 0xBE000000 ++#define RALINK_TIMER_BASE 0xBE000100 ++#define RALINK_INTCL_BASE 0xBE000200 ++#define RALINK_RBUS_MATRIXCTL_BASE 0xBE000400 ++#define RALINK_MIPS_CNT_BASE 0x1E000500 ++#define RALINK_PIO_BASE 0xBE000600 ++#define RALINK_SPDIF_BASE 0xBE000700 ++#define RALINK_I2C_BASE 0xBE000900 ++#define RALINK_I2S_BASE 0xBE000A00 ++#define RALINK_SPI_BASE 0xBE000B00 ++#define RALINK_UART_LITE1_BASE 0x1E000C00 ++#define RALINK_UART_LITE_BASE RALINK_UART_LITE1_BASE ++#define RALINK_UART_LITE2_BASE 0x1E000D00 ++#define RALINK_UART_BASE RALINK_UART_LITE2_BASE ++#define RALINK_UART_LITE3_BASE 0x1E000E00 ++#define RALINK_ANA_CTRL_BASE 0xBE000F00 ++#define RALINK_PCM_BASE 0xBE002000 ++#define RALINK_GDMA_BASE 0xBE002800 ++#define RALINK_NAND_CTRL_BASE 0xBE003000 ++#define RALINK_NANDECC_CTRL_BASE 0xBE003800 ++#define RALINK_CRYPTO_ENGINE_BASE 0xBE004000 ++#define RALINK_MEMCTRL_BASE 0xBE005000 ++#define RALINK_EXT_MC_ARB_BASE 0xBE006000 ++#define RALINK_HS_DMA_BASE 0xBE007000 ++#define RALINK_FRAME_ENGINE_BASE 0xBE100000 ++#define RALINK_PPE_BASE 0xBE100C00 ++#define RALINK_ETH_SW_BASE 0xBE110000 ++#define RALINK_ROM_BASE 0xBE118000 ++#define RALINK_MSDC_BASE 0xBE130000 ++#define RALINK_PCI_BASE 0xBE140000 ++#define RALINK_USB_HOST_BASE 0x1E1C0000 ++#define RALINK_11N_MAC_BASE 0xBE180000 //Unused ++ ++#define RALINK_MCNT_CFG 0xBE000500 ++#define RALINK_COMPARE 0xBE000504 ++#define RALINK_COUNT 0xBE000508 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_FE (1<<3) ++#define RALINK_INTCTL_PCIE0 (1<<4) ++#define RALINK_INTCTL_SYSCTL (1<<6) ++#define RALINK_INTCTL_I2C (1<<8) ++#define RALINK_INTCTL_DRAMC (1<<9) ++#define RALINK_INTCTL_PCM (1<<10) ++#define RALINK_INTCTL_HSDMA (1<<11) ++#define RALINK_INTCTL_PIO (1<<12) ++#define RALINK_INTCTL_DMA (1<<13) ++#define RALINK_INTCTL_NFI (1<<14) ++#define RALINK_INTCTL_NFIECC (1<<15) ++#define RALINK_INTCTL_I2S (1<<16) ++#define RALINK_INTCTL_SPI (1<<17) ++#define RALINK_INTCTL_SPDIF (1<<18) ++#define RALINK_INTCTL_CRYPTO (1<<19) ++#define RALINK_INTCTL_SDXC (1<<20) ++#define RALINK_INTCTL_PCTRL (1<<21) ++#define RALINK_INTCTL_USB (1<<22) ++#define RALINK_INTCTL_SWITCH (1<<23) ++#define RALINK_INTCTL_PCIE1 (1<<24) ++#define RALINK_INTCTL_PCIE2 (1<<25) ++#define RALINK_INTCTL_UART1 (1<<26) ++#define RALINK_INTCTL_UART2 (1<<27) ++#define RALINK_INTCTL_UART3 (1<<28) ++#define RALINK_INTCTL_WDTIMER (1<<29) ++#define RALINK_INTCTL_TIMER0 (1<<30) ++#define RALINK_INTCTL_TIMER1 (1<<31) ++ ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_MCM_RST (1<<1) ++#define RALINK_HSDMA_RST (1<<2) ++#define RALINK_FE_RST (1<<6) ++#define RALINK_SPDIF_RST (1<<7) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_NAND_RST (1<<15) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UART1_RST (1<<19) ++#define RALINK_UART2_RST (1<<20) ++#define RALINK_UART3_RST (1<<21) ++#define RALINK_ETH_RST (1<<23) ++#define RALINK_PCIE0_RST (1<<24) ++#define RALINK_PCIE1_RST (1<<25) ++#define RALINK_PCIE2_RST (1<<26) ++#define RALINK_AUX_STCK_RST (1<<28) ++#define RALINK_CRYPTO_RST (1<<29) ++#define RALINK_SDXC_RST (1<<30) ++#define RALINK_PPE_RST (1<<31) ++ ++//Clock Conf Register ++#define RALINK_PCIE0_CLK_EN (1<<24) ++#define RALINK_PCIE1_CLK_EN (1<<25) ++#define RALINK_PCIE2_CLK_EN (1<<26) ++//#define RALINK_UPHY0_CLK_EN (1<<27) ++//#define RALINK_UPHY1_CLK_EN (1<<28) ++ ++//CPU PLL CFG Register ++#define CPLL_SW_CONFIG (0x1UL << 31) ++#define CPLL_MULT_RATIO_SHIFT 16 ++#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT) ++#define CPLL_DIV_RATIO_SHIFT 10 ++#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT) ++#define BASE_CLOCK 40 /* Mhz */ ++ ++#define RALINK_TESTSTAT 0xBE000018 ++#define RALINK_TESTSTAT2 0xBE00001C ++ ++#elif defined (CONFIG_RALINK_MT7628) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_RBUS_MATRIXCTL_BASE 0xB0000400 ++#define RALINK_MIPS_CNT_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_SPI_SLAVE_BASE 0xB0000700 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_UART_LITE1_BASE 0x10000C00 ++#define RALINK_UART_LITE_BASE RALINK_UART_LITE1_BASE ++#define RALINK_UART_LITE2_BASE 0x10000D00 ++#define RALINK_UART_BASE RALINK_UART_LITE2_BASE ++#define RALINK_UART_LITE3_BASE 0x10000E00 ++#define RALINK_PCM_BASE 0xB0002000 ++#define RALINK_GDMA_BASE 0xB0002800 ++#define RALINK_AES_ENGINE_BASE 0xB0004000 ++#define RALINK_CRYPTO_ENGINE_BASE RALINK_AES_ENGINE_BASE ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_PPE_BASE 0xB0100C00 ++#define RALINK_ETH_SW_BASE 0xB0110000 ++#define RALINK_USB_DEV_BASE 0xB0120000 ++#define RALINK_MSDC_BASE 0xB0130000 ++#define RALINK_PCI_BASE 0xB0140000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_HOST_BASE 0x101C0000 ++ ++#define RALINK_MCNT_CFG 0xB0000500 ++#define RALINK_COMPARE 0xB0000504 ++#define RALINK_COUNT 0xB0000508 ++ ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_SPI (1<<11) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_CRYPTO (1<<13) ++#define RALINK_INTCTL_ESW (1<<17) ++#define RALINK_INTCTL_UHST (1<<18) ++#define RALINK_INTCTL_UDEV (1<<19) ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_UHST_RST (1<<22) ++#define RALINK_ESW_RST (1<<23) ++#define RALINK_EPHY_RST (1<<24) ++#define RALINK_UDEV_RST (1<<25) ++#define RALINK_PCIE0_RST (1<<26) ++#define RALINK_PCIE1_RST (1<<27) ++#define RALINK_MIPS_CNT_RST (1<<28) ++#define RALINK_CRYPTO_RST (1<<29) ++ ++//Clock Conf Register ++#define RALINK_UPHY0_CLK_EN (1<<25) ++#define RALINK_UPHY1_CLK_EN (1<<22) ++#define RALINK_PCIE0_CLK_EN (1<<26) ++#define RALINK_PCIE1_CLK_EN (1<<27) ++ ++//CPU PLL CFG Register ++#define CPLL_SW_CONFIG (0x1UL << 31) ++#define CPLL_MULT_RATIO_SHIFT 16 ++#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT) ++#define CPLL_DIV_RATIO_SHIFT 10 ++#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT) ++#define BASE_CLOCK 40 /* Mhz */ ++ ++#endif ++#endif +diff --git a/arch/mips/include/asm/rt2880/serial_rt2880.h b/arch/mips/include/asm/rt2880/serial_rt2880.h +new file mode 100644 +index 0000000..74f024f +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/serial_rt2880.h +@@ -0,0 +1,443 @@ ++/************************************************************************** ++ * ++ * BRIEF MODULE DESCRIPTION ++ * serial port definition for Ralink RT2880 solution ++ * ++ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw) ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * ++ ************************************************************************** ++ * May 2007 Bruce Chang ++ * ++ * Initial Release ++ * ++ * ++ * ++ ************************************************************************** ++ */ ++ ++#if defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628) ++#define RT2880_UART_RBR_OFFSET 0x00 ++#define RT2880_UART_TBR_OFFSET 0x00 ++#define RT2880_UART_IER_OFFSET 0x04 ++#define RT2880_UART_IIR_OFFSET 0x08 ++#define RT2880_UART_FCR_OFFSET 0x08 ++#define RT2880_UART_LCR_OFFSET 0x0C ++#define RT2880_UART_MCR_OFFSET 0x10 ++#define RT2880_UART_LSR_OFFSET 0x14 ++#define RT2880_UART_DLL_OFFSET 0x00 ++#define RT2880_UART_DLM_OFFSET 0x04 ++#else ++#define RT2880_UART_RBR_OFFSET 0x00 ++#define RT2880_UART_TBR_OFFSET 0x04 ++#define RT2880_UART_IER_OFFSET 0x08 ++#define RT2880_UART_IIR_OFFSET 0x0C ++#define RT2880_UART_FCR_OFFSET 0x10 ++#define RT2880_UART_LCR_OFFSET 0x14 ++#define RT2880_UART_MCR_OFFSET 0x18 ++#define RT2880_UART_LSR_OFFSET 0x1C ++#define RT2880_UART_DLL_OFFSET 0x2C ++#define RT2880_UART_DLM_OFFSET 0x30 ++#endif ++ ++#define RBR(x) *(volatile u32 *)((x)+RT2880_UART_RBR_OFFSET) ++#define TBR(x) *(volatile u32 *)((x)+RT2880_UART_TBR_OFFSET) ++#define IER(x) *(volatile u32 *)((x)+RT2880_UART_IER_OFFSET) ++#define IIR(x) *(volatile u32 *)((x)+RT2880_UART_IIR_OFFSET) ++#define FCR(x) *(volatile u32 *)((x)+RT2880_UART_FCR_OFFSET) ++#define LCR(x) *(volatile u32 *)((x)+RT2880_UART_LCR_OFFSET) ++#define MCR(x) *(volatile u32 *)((x)+RT2880_UART_MCR_OFFSET) ++#define LSR(x) *(volatile u32 *)((x)+RT2880_UART_LSR_OFFSET) ++#define DLL(x) *(volatile u32 *)((x)+RT2880_UART_DLL_OFFSET) ++#define DLM(x) *(volatile u32 *)((x)+RT2880_UART_DLM_OFFSET) ++ ++ ++#if defined (CONFIG_RALINK_RT2880) || \ ++ defined (CONFIG_RALINK_RT2883) || \ ++ defined (CONFIG_RALINK_RT3883) || \ ++ defined (CONFIG_RALINK_RT3352) || \ ++ defined (CONFIG_RALINK_RT5350) || \ ++ defined (CONFIG_RALINK_RT6855) || \ ++ defined (CONFIG_RALINK_MT7620) || \ ++ defined (CONFIG_RALINK_RT3052) ++ ++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ ++ ++#define UART_TX 4 /* Out: Transmit buffer (DLAB=0) */ ++#define UART_TRG 4 /* (LCR=BF) FCTR bit 7 selects Rx or Tx ++ * In: Fifo count ++ * Out: Fifo custom trigger levels ++ * XR16C85x only ++ */ ++ ++#define UART_IER 8 /* Out: Interrupt Enable Register */ ++#define UART_FCTR 8 /* (LCR=BF) Feature Control Register ++ * XR16C85x only ++ */ ++ ++#define UART_IIR 12 /* In: Interrupt ID Register */ ++#define UART_EFR 12 /* I/O: Extended Features Register */ ++ /* (DLAB=1, 16C660 only) */ ++ ++#define UART_FCR 16 /* Out: FIFO Control Register */ ++#define UART_LCR 20 /* Out: Line Control Register */ ++#define UART_MCR 24 /* Out: Modem Control Register */ ++#define UART_LSR 28 /* In: Line Status Register */ ++#define UART_MSR 32 /* In: Modem Status Register */ ++#define UART_SCR 36 /* I/O: Scratch Register */ ++#define UART_DLL 44 /* Out: Divisor Latch Low (DLAB=1) */ ++/* Since surfboard uart cannot be accessed by byte, using UART_DLM will cause ++ * unpredictable values to be written to the Divisor Latch ++ */ ++#define UART_DLM 48 /* Out: Divisor Latch High (DLAB=1) */ ++ ++#else ++ ++#define UART_RX 0 /* In: Receive buffer */ ++#define UART_TX 0 /* Out: Transmit buffer */ ++#define UART_DLL 0 /* Out: Divisor Latch Low */ ++#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx ++ * In: Fifo count ++ * Out: Fifo custom trigger levels */ ++ ++#define UART_DLM 4 /* Out: Divisor Latch High */ ++#define UART_IER 4 /* Out: Interrupt Enable Register */ ++#define UART_FCTR 4 /* Feature Control Register */ ++ ++#define UART_IIR 8 /* In: Interrupt ID Register */ ++#define UART_FCR 8 /* Out: FIFO Control Register */ ++#define UART_EFR 8 /* I/O: Extended Features Register */ ++ ++#define UART_LCR 12 /* Out: Line Control Register */ ++#define UART_MCR 16 /* Out: Modem Control Register */ ++#define UART_LSR 20 /* In: Line Status Register */ ++#define UART_MSR 24 /* In: Modem Status Register */ ++#define UART_SCR 28 /* I/O: Scratch Register */ ++#define UART_EMSR 28 /* Extended Mode Select Register */ ++ ++#endif ++/* ++ * DLAB=0 ++ */ ++//#define UART_IER 1 /* Out: Interrupt Enable Register */ ++#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ ++#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ ++#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ ++#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ ++/* ++ * Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1 ++ */ ++#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */ ++ ++//#define UART_IIR 2 /* In: Interrupt ID Register */ ++#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ ++#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ ++#define UART_IIR_MSI 0x00 /* Modem status interrupt */ ++#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ ++#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ ++#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ ++ ++//#define UART_FCR 2 /* Out: FIFO Control Register */ ++#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ ++#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ ++#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ ++#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ ++/* ++ * Note: The FIFO trigger levels are chip specific: ++ * RX:76 = 00 01 10 11 TX:54 = 00 01 10 11 ++ * PC16550D: 1 4 8 14 xx xx xx xx ++ * TI16C550A: 1 4 8 14 xx xx xx xx ++ * TI16C550C: 1 4 8 14 xx xx xx xx ++ * ST16C550: 1 4 8 14 xx xx xx xx ++ * ST16C650: 8 16 24 28 16 8 24 30 PORT_16650V2 ++ * NS16C552: 1 4 8 14 xx xx xx xx ++ * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654 ++ * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750 ++ * TI16C752: 8 16 56 60 8 16 32 56 ++ */ ++#define UART_FCR_R_TRIG_00 0x00 ++#define UART_FCR_R_TRIG_01 0x40 ++#define UART_FCR_R_TRIG_10 0x80 ++#define UART_FCR_R_TRIG_11 0xc0 ++#define UART_FCR_T_TRIG_00 0x00 ++#define UART_FCR_T_TRIG_01 0x10 ++#define UART_FCR_T_TRIG_10 0x20 ++#define UART_FCR_T_TRIG_11 0x30 ++ ++#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ ++#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ ++#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ ++#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ ++#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ ++/* 16650 definitions */ ++#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */ ++#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */ ++#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */ ++#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */ ++#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */ ++#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */ ++#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */ ++#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */ ++#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */ ++ ++//#define UART_LCR 3 /* Out: Line Control Register */ ++/* ++ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting ++ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. ++ */ ++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ ++#define UART_LCR_SBC 0x40 /* Set break control */ ++#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ ++#define UART_LCR_EPAR 0x10 /* Even parity select */ ++#define UART_LCR_PARITY 0x08 /* Parity Enable */ ++#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 bit, 1=2 bits */ ++#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ ++#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ ++#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ ++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ ++ ++//#define UART_MCR 4 /* Out: Modem Control Register */ ++#define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */ ++#define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */ ++#define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */ ++#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */ ++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ ++#define UART_MCR_OUT2 0x08 /* Out2 complement */ ++#define UART_MCR_OUT1 0x04 /* Out1 complement */ ++#define UART_MCR_RTS 0x02 /* RTS complement */ ++#define UART_MCR_DTR 0x01 /* DTR complement */ ++ ++//#define UART_LSR 5 /* In: Line Status Register */ ++#define UART_LSR_TEMT 0x40 /* Transmitter empty */ ++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ ++#define UART_LSR_BI 0x10 /* Break interrupt indicator */ ++#define UART_LSR_FE 0x08 /* Frame error indicator */ ++#define UART_LSR_PE 0x04 /* Parity error indicator */ ++#define UART_LSR_OE 0x02 /* Overrun error indicator */ ++#define UART_LSR_DR 0x01 /* Receiver data ready */ ++ ++//#define UART_MSR 6 /* In: Modem Status Register */ ++#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ ++#define UART_MSR_RI 0x40 /* Ring Indicator */ ++#define UART_MSR_DSR 0x20 /* Data Set Ready */ ++#define UART_MSR_CTS 0x10 /* Clear to Send */ ++#define UART_MSR_DDCD 0x08 /* Delta DCD */ ++#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ ++#define UART_MSR_DDSR 0x02 /* Delta DSR */ ++#define UART_MSR_DCTS 0x01 /* Delta CTS */ ++#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ ++ ++//#define UART_SCR 7 /* I/O: Scratch Register */ ++ ++/* ++ * DLAB=1 ++ */ ++//#define UART_DLL 0 /* Out: Divisor Latch Low */ ++//#define UART_DLM 1 /* Out: Divisor Latch High */ ++ ++/* ++ * LCR=0xBF (or DLAB=1 for 16C660) ++ */ ++//#define UART_EFR 2 /* I/O: Extended Features Register */ ++#define UART_EFR_CTS 0x80 /* CTS flow control */ ++#define UART_EFR_RTS 0x40 /* RTS flow control */ ++#define UART_EFR_SCD 0x20 /* Special character detect */ ++#define UART_EFR_ECB 0x10 /* Enhanced control bit */ ++/* ++ * the low four bits control software flow control ++ */ ++ ++/* ++ * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654 ++ */ ++#define UART_XON1 4 /* I/O: Xon character 1 */ ++#define UART_XON2 5 /* I/O: Xon character 2 */ ++#define UART_XOFF1 6 /* I/O: Xoff character 1 */ ++#define UART_XOFF2 7 /* I/O: Xoff character 2 */ ++ ++/* ++ * EFR[4]=1 MCR[6]=1, TI16C752 ++ */ ++#define UART_TI752_TCR 6 /* I/O: transmission control register */ ++#define UART_TI752_TLR 7 /* I/O: trigger level register */ ++ ++/* ++ * LCR=0xBF, XR16C85x ++ */ ++//#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx ++// * In: Fifo count ++// * Out: Fifo custom trigger levels */ ++/* ++ * These are the definitions for the Programmable Trigger Register ++ */ ++#define UART_TRG_1 0x01 ++#define UART_TRG_4 0x04 ++#define UART_TRG_8 0x08 ++#define UART_TRG_16 0x10 ++#define UART_TRG_32 0x20 ++#define UART_TRG_64 0x40 ++#define UART_TRG_96 0x60 ++#define UART_TRG_120 0x78 ++#define UART_TRG_128 0x80 ++ ++//#define UART_FCTR 1 /* Feature Control Register */ ++#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */ ++#define UART_FCTR_RTS_4DELAY 0x01 ++#define UART_FCTR_RTS_6DELAY 0x02 ++#define UART_FCTR_RTS_8DELAY 0x03 ++#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */ ++#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */ ++#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */ ++#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */ ++#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */ ++#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */ ++#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */ ++#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */ ++#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */ ++ ++/* ++ * LCR=0xBF, FCTR[6]=1 ++ */ ++//#define UART_EMSR 7 /* Extended Mode Select Register */ ++#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */ ++#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */ ++ ++/* ++ * The Intel XScale on-chip UARTs define these bits ++ */ ++#define UART_IER_DMAE 0x80 /* DMA Requests Enable */ ++#define UART_IER_UUE 0x40 /* UART Unit Enable */ ++#define UART_IER_NRZE 0x20 /* NRZ coding Enable */ ++#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */ ++ ++#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */ ++ ++#define UART_FCR_PXAR1 0x00 /* receive FIFO treshold = 1 */ ++#define UART_FCR_PXAR8 0x40 /* receive FIFO treshold = 8 */ ++#define UART_FCR_PXAR16 0x80 /* receive FIFO treshold = 16 */ ++#define UART_FCR_PXAR32 0xc0 /* receive FIFO treshold = 32 */ ++ ++ ++ ++ ++/* ++ * These register definitions are for the 16C950 ++ */ ++#define UART_ASR 0x01 /* Additional Status Register */ ++#define UART_RFL 0x03 /* Receiver FIFO level */ ++#define UART_TFL 0x04 /* Transmitter FIFO level */ ++#define UART_ICR 0x05 /* Index Control Register */ ++ ++/* The 16950 ICR registers */ ++#define UART_ACR 0x00 /* Additional Control Register */ ++#define UART_CPR 0x01 /* Clock Prescalar Register */ ++#define UART_TCR 0x02 /* Times Clock Register */ ++#define UART_CKS 0x03 /* Clock Select Register */ ++#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */ ++#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */ ++#define UART_FCL 0x06 /* Flow Control Level Lower */ ++#define UART_FCH 0x07 /* Flow Control Level Higher */ ++#define UART_ID1 0x08 /* ID #1 */ ++#define UART_ID2 0x09 /* ID #2 */ ++#define UART_ID3 0x0A /* ID #3 */ ++#define UART_REV 0x0B /* Revision */ ++#define UART_CSR 0x0C /* Channel Software Reset */ ++#define UART_NMR 0x0D /* Nine-bit Mode Register */ ++#define UART_CTR 0xFF ++ ++/* ++ * The 16C950 Additional Control Reigster ++ */ ++#define UART_ACR_RXDIS 0x01 /* Receiver disable */ ++#define UART_ACR_TXDIS 0x02 /* Receiver disable */ ++#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */ ++#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */ ++#define UART_ACR_ICRRD 0x40 /* ICR Read enable */ ++#define UART_ACR_ASREN 0x80 /* Additional status enable */ ++ ++ ++ ++/* ++ * These definitions are for the RSA-DV II/S card, from ++ * ++ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp> ++ */ ++ ++#define UART_RSA_BASE (-8) ++ ++#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */ ++ ++#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */ ++#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */ ++#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */ ++#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */ ++ ++#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */ ++ ++#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */ ++#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */ ++#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */ ++#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */ ++#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */ ++ ++#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */ ++ ++#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */ ++#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */ ++#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */ ++#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */ ++#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */ ++#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */ ++#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */ ++#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */ ++ ++#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */ ++ ++#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */ ++ ++#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */ ++ ++#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */ ++ ++/* ++ * The RSA DSV/II board has two fixed clock frequencies. One is the ++ * standard rate, and the other is 8 times faster. ++ */ ++#define SERIAL_RSA_BAUD_BASE (921600) ++#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8) ++ ++/* ++ * Extra serial register definitions for the internal UARTs ++ * in TI OMAP processors. ++ */ ++#define UART_OMAP_MDR1 0x08 /* Mode definition register */ ++#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */ ++#define UART_OMAP_SCR 0x10 /* Supplementary control register */ ++#define UART_OMAP_SSR 0x11 /* Supplementary status register */ ++#define UART_OMAP_EBLR 0x12 /* BOF length register */ ++#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */ ++#define UART_OMAP_MVER 0x14 /* Module version register */ ++#define UART_OMAP_SYSC 0x15 /* System configuration register */ ++#define UART_OMAP_SYSS 0x16 /* System status register */ ++ ++ +diff --git a/arch/mips/include/asm/rt2880/sizes.h b/arch/mips/include/asm/rt2880/sizes.h +new file mode 100644 +index 0000000..7f50ae0 +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/sizes.h +@@ -0,0 +1,52 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++/* DO NOT EDIT!! - this file automatically generated ++ * from .s file by awk -f s2h.awk ++ */ ++/* Size definitions ++ * Copyright (C) ARM Limited 1998. All rights reserved. ++ */ ++ ++#ifndef __sizes_h ++#define __sizes_h 1 ++ ++/* handy sizes */ ++#define SZ_1K 0x00000400 ++#define SZ_4K 0x00001000 ++#define SZ_8K 0x00002000 ++#define SZ_16K 0x00004000 ++#define SZ_64K 0x00010000 ++#define SZ_128K 0x00020000 ++#define SZ_256K 0x00040000 ++#define SZ_512K 0x00080000 ++ ++#define SZ_1M 0x00100000 ++#define SZ_2M 0x00200000 ++#define SZ_4M 0x00400000 ++#define SZ_8M 0x00800000 ++#define SZ_16M 0x01000000 ++#define SZ_32M 0x02000000 ++#define SZ_64M 0x04000000 ++#define SZ_128M 0x08000000 ++#define SZ_256M 0x10000000 ++#define SZ_512M 0x20000000 ++ ++#define SZ_1G 0x40000000 ++#define SZ_2G 0x80000000 ++ ++#endif ++ ++/* END */ +diff --git a/arch/mips/include/asm/rt2880/surfboard.h b/arch/mips/include/asm/rt2880/surfboard.h +new file mode 100644 +index 0000000..373da34 +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/surfboard.h +@@ -0,0 +1,70 @@ ++/* ++ * Copyright (C) 2001 Palmchip Corporation. All rights reserved. ++ * ++ * ######################################################################## ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ * ++ * ######################################################################## ++ * ++ */ ++#ifndef _SURFBOARD_H ++#define _SURFBOARD_H ++ ++#include <asm/addrspace.h> ++ ++ ++ ++/* ++ * Surfboard system clock. ++ * This is the default value and maybe overidden by System Clock passed on the ++ * command line (sysclk=). ++ */ ++#define SURFBOARD_SYSTEM_CLOCK (125000000) ++ ++/* ++ * Surfboard UART base baud rate = System Clock / 16. ++ * Ex. (14.7456 MHZ / 16) = 921600 ++ * (32.0000 MHZ / 16) = 2000000 ++ */ ++#define SURFBOARD_BAUD_DIV (16) ++#define SURFBOARD_BASE_BAUD (SURFBOARD_SYSTEM_CLOCK / SURFBOARD_BAUD_DIV) ++ ++/* ++ * Maximum number of IDE Controllers ++ * Surfboard only has one ide (ide0), so only 2 drives are ++ * possible. (no need to check for more hwifs.) ++ */ ++//#define MAX_IDE_HWIFS (1) /* Surfboard/Wakeboard */ ++#define MAX_IDE_HWIFS (2) /* Graphite board */ ++ ++#define GCMP_BASE_ADDR 0x1fbf8000 ++#define GCMP_ADDRSPACE_SZ (256 * 1024) ++ ++/* ++ * * GIC Specific definitions ++ * */ ++#define GIC_BASE_ADDR 0x1fbc0000 ++#define GIC_ADDRSPACE_SZ (128 * 1024) ++#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE) ++ ++/* GIC's Nomenclature for Core Interrupt Pins */ ++#define GIC_CPU_INT0 0 /* Core Interrupt 2 */ ++#define GIC_CPU_INT1 1 /* . */ ++#define GIC_CPU_INT2 2 /* . */ ++#define GIC_CPU_INT3 3 /* . */ ++#define GIC_CPU_INT4 4 /* . */ ++#define GIC_CPU_INT5 5 /* Core Interrupt 5 */ ++ ++#endif /* !(_SURFBOARD_H) */ +diff --git a/arch/mips/include/asm/rt2880/surfboardint.h b/arch/mips/include/asm/rt2880/surfboardint.h +new file mode 100644 +index 0000000..671cca5 +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/surfboardint.h +@@ -0,0 +1,190 @@ ++/* ++ * Copyright (C) 2001 Palmchip Corporation. All rights reserved. ++ * ++ * ######################################################################## ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ * ++ * ######################################################################## ++ * ++ * Defines for the Surfboard interrupt controller. ++ * ++ */ ++#ifndef _SURFBOARDINT_H ++#define _SURFBOARDINT_H ++ ++/* Number of IRQ supported on hw interrupt 0. */ ++#if defined (CONFIG_RALINK_RT2880) ++#define RALINK_CPU_TIMER_IRQ 6 /* mips timer */ ++#define SURFBOARDINT_GPIO 7 /* GPIO */ ++#define SURFBOARDINT_UART1 8 /* UART Lite */ ++#define SURFBOARDINT_UART 9 /* UART */ ++#define SURFBOARDINT_TIMER0 10 /* timer0 */ ++#elif defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT2883) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_MT7620) ++#define RALINK_CPU_TIMER_IRQ 5 /* mips timer */ ++#define SURFBOARDINT_GPIO 6 /* GPIO */ ++#define SURFBOARDINT_DMA 7 /* DMA */ ++#define SURFBOARDINT_NAND 8 /* NAND */ ++#define SURFBOARDINT_PC 9 /* Performance counter */ ++#define SURFBOARDINT_I2S 10 /* I2S */ ++#define SURFBOARDINT_SDXC 14 /* SDXC */ ++#define SURFBOARDINT_ESW 17 /* ESW */ ++#define SURFBOARDINT_UART1 12 /* UART Lite */ ++#define SURFBOARDINT_CRYPTO 13 /* CryptoEngine */ ++#define SURFBOARDINT_SYSCTL 32 /* SYSCTL */ ++#define SURFBOARDINT_TIMER0 33 /* timer0 */ ++#define SURFBOARDINT_WDG 34 /* watch dog */ ++#define SURFBOARDINT_ILL_ACC 35 /* illegal access */ ++#define SURFBOARDINT_PCM 36 /* PCM */ ++#define SURFBOARDINT_UART 37 /* UART */ ++#define RALINK_INT_PCIE0 13 /* PCIE0 */ ++#define RALINK_INT_PCIE1 14 /* PCIE1 */ ++ ++ ++#elif defined (CONFIG_RALINK_MT7628) ++#define SURFBOARDINT_SYSCTL 0 /* SYSCTL */ ++#define SURFBOARDINT_PCM 4 /* PCM */ ++#define SURFBOARDINT_GPIO 6 /* GPIO */ ++#define SURFBOARDINT_DMA 7 /* DMA */ ++#define SURFBOARDINT_PC 9 /* Performance counter */ ++#define SURFBOARDINT_I2S 10 /* I2S */ ++#define SURFBOARDINT_SPI 11 /* SPI */ ++#define SURFBOARDINT_AES 13 /* AES */ ++#define SURFBOARDINT_CRYPTO 13 /* CryptoEngine */ ++#define SURFBOARDINT_SDXC 14 /* SDXC */ ++#define SURFBOARDINT_ESW 17 /* ESW */ ++#define SURFBOARDINT_USB 18 /* USB */ ++#define SURFBOARDINT_UART_LITE1 20 /* UART Lite */ ++#define SURFBOARDINT_UART_LITE2 21 /* UART Lite */ ++#define SURFBOARDINT_UART_LITE3 22 /* UART Lite */ ++#define SURFBOARDINT_UART1 SURFBOARDINT_UART_LITE1 ++#define SURFBOARDINT_UART SURFBOARDINT_UART_LITE2 ++#define SURFBOARDINT_WDG 23 /* WDG timer */ ++#define SURFBOARDINT_TIMER0 24 /* Timer0 */ ++#define SURFBOARDINT_TIMER1 25 /* Timer1 */ ++#define SURFBOARDINT_ILL_ACC 35 /* illegal access */ ++#define RALINK_INT_PCIE0 2 /* PCIE0 */ ++ ++ ++#elif defined (CONFIG_RALINK_MT7621) ++ ++#define SURFBOARDINT_FE 3 /* FE */ ++#define SURFBOARDINT_PCIE0 4 /* PCIE0 */ ++#define SURFBOARDINT_SYSCTL 6 /* SYSCTL */ ++#define SURFBOARDINT_I2C 8 /* I2C */ ++#define SURFBOARDINT_DRAMC 9 /* DRAMC */ ++#define SURFBOARDINT_PCM 10 /* PCM */ ++#define SURFBOARDINT_HSGDMA 11 /* HSGDMA */ ++#define SURFBOARDINT_GPIO 12 /* GPIO */ ++#define SURFBOARDINT_DMA 13 /* GDMA */ ++#define SURFBOARDINT_NAND 14 /* NAND */ ++#define SURFBOARDINT_NAND_ECC 15 /* NFI ECC */ ++#define SURFBOARDINT_I2S 16 /* I2S */ ++#define SURFBOARDINT_SPI 17 /* SPI */ ++#define SURFBOARDINT_SPDIF 18 /* SPDIF */ ++#define SURFBOARDINT_CRYPTO 19 /* CryptoEngine */ ++#define SURFBOARDINT_SDXC 20 /* SDXC */ ++#define SURFBOARDINT_PCTRL 21 /* Performance counter */ ++#define SURFBOARDINT_USB 22 /* USB */ ++#define SURFBOARDINT_ESW 31 /* Switch */ ++#define SURFBOARDINT_PCIE1 24 /* PCIE1 */ ++#define SURFBOARDINT_PCIE2 25 /* PCIE2 */ ++#define SURFBOARDINT_UART_LITE1 26 /* UART Lite */ ++#define SURFBOARDINT_UART_LITE2 27 /* UART Lite */ ++#define SURFBOARDINT_UART_LITE3 28 /* UART Lite */ ++#define SURFBOARDINT_UART SURFBOARDINT_UART_LITE2 //ttyS0 ++#define SURFBOARDINT_UART1 SURFBOARDINT_UART_LITE1 //ttyS1 ++ ++#define SURFBOARDINT_WDG 29 /* WDG timer */ ++#define SURFBOARDINT_TIMER0 30 /* Timer0 */ ++#define SURFBOARDINT_TIMER1 31 /* Timer1 */ ++ ++#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0 ++#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1 ++#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2 ++ ++#elif defined (CONFIG_RALINK_RT3883) ++#define RALINK_CPU_TIMER_IRQ 5 /* mips timer */ ++#define SURFBOARDINT_GPIO 6 /* GPIO */ ++#define SURFBOARDINT_DMA 7 /* DMA */ ++#define SURFBOARDINT_NAND 8 /* NAND */ ++#define SURFBOARDINT_PC 9 /* Performance counter */ ++#define SURFBOARDINT_I2S 10 /* I2S */ ++#define SURFBOARDINT_UART1 12 /* UART Lite */ ++#define SURFBOARDINT_PCI 18 /* PCI */ ++#define SURFBOARDINT_UDEV 19 /* USB Device */ ++#define SURFBOARDINT_UHST 20 /* USB Host */ ++#define SURFBOARDINT_SYSCTL 32 /* SYSCTL */ ++#define SURFBOARDINT_TIMER0 33 /* timer0 */ ++#define SURFBOARDINT_ILL_ACC 35 /* illegal access */ ++#define SURFBOARDINT_PCM 36 /* PCM */ ++#define SURFBOARDINT_UART 37 /* UART */ ++#endif ++ ++#define SURFBOARDINT_END 64 ++#define RT2880_INTERINT_START 40 ++ ++/* Global interrupt bit definitions */ ++#define C_SURFBOARD_GLOBAL_INT 31 ++#define M_SURFBOARD_GLOBAL_INT (1 << C_SURFBOARD_GLOBAL_INT) ++ ++/* added ??? */ ++#define RALINK_SDRAM_ILL_ACC_ADDR *(volatile u32 *)(RALINK_SYSCTL_BASE + 0x310) ++#define RALINK_SDRAM_ILL_ACC_TYPE *(volatile u32 *)(RALINK_SYSCTL_BASE + 0x314) ++/* end of added, bobtseng */ ++ ++/* ++ * Surfboard registers are memory mapped on 32-bit aligned boundaries and ++ * only word access are allowed. ++ */ ++#if defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628) ++#define RALINK_IRQ0STAT (RALINK_INTCL_BASE + 0x9C) //IRQ_STAT ++#define RALINK_IRQ1STAT (RALINK_INTCL_BASE + 0xA0) //FIQ_STAT ++#define RALINK_INTTYPE (RALINK_INTCL_BASE + 0x6C) //FIQ_SEL ++#define RALINK_INTRAW (RALINK_INTCL_BASE + 0xA4) //INT_PURE ++#define RALINK_INTENA (RALINK_INTCL_BASE + 0x80) //IRQ_MASK_SET ++#define RALINK_INTDIS (RALINK_INTCL_BASE + 0x78) //IRQ_MASK_CLR ++#else ++#define RALINK_IRQ0STAT (RALINK_INTCL_BASE + 0x0) ++#define RALINK_IRQ1STAT (RALINK_INTCL_BASE + 0x4) ++#define RALINK_INTTYPE (RALINK_INTCL_BASE + 0x20) ++#define RALINK_INTRAW (RALINK_INTCL_BASE + 0x30) ++#define RALINK_INTENA (RALINK_INTCL_BASE + 0x34) ++#define RALINK_INTDIS (RALINK_INTCL_BASE + 0x38) ++#endif ++ ++/* bobtseng added ++, 2006.3.6. */ ++#define read_32bit_cp0_register(source) \ ++({ int __res; \ ++ __asm__ __volatile__( \ ++ ".set\tpush\n\t" \ ++ ".set\treorder\n\t" \ ++ "mfc0\t%0,"STR(source)"\n\t" \ ++ ".set\tpop" \ ++ : "=r" (__res)); \ ++ __res;}) ++ ++#define write_32bit_cp0_register(register,value) \ ++ __asm__ __volatile__( \ ++ "mtc0\t%0,"STR(register)"\n\t" \ ++ "nop" \ ++ : : "r" (value)); ++ ++/* bobtseng added --, 2006.3.6. */ ++ ++void surfboardint_init(void); ++u32 get_surfboard_sysclk(void); ++ ++ ++#endif /* !(_SURFBOARDINT_H) */ +diff --git a/arch/mips/include/asm/rt2880/war.h b/arch/mips/include/asm/rt2880/war.h +new file mode 100644 +index 0000000..7c6931d +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/war.h +@@ -0,0 +1,25 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> ++ */ ++#ifndef __ASM_MIPS_MACH_MIPS_WAR_H ++#define __ASM_MIPS_MACH_MIPS_WAR_H ++ ++#define R4600_V1_INDEX_ICACHEOP_WAR 0 ++#define R4600_V1_HIT_CACHEOP_WAR 0 ++#define R4600_V2_HIT_CACHEOP_WAR 0 ++#define R5432_CP0_INTERRUPT_WAR 0 ++#define BCM1250_M3_WAR 0 ++#define SIBYTE_1956_WAR 0 ++#define MIPS4K_ICACHE_REFILL_WAR 1 ++#define MIPS_CACHE_SYNC_WAR 1 ++#define TX49XX_ICACHE_INDEX_INV_WAR 0 ++#define RM9000_CDEX_SMP_WAR 0 ++#define ICACHE_REFILLS_WORKAROUND_WAR 1 ++#define R10000_LLSC_WAR 0 ++#define MIPS34K_MISSED_ITLB_WAR 0 ++ ++#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ +diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig +index ef6a274..1b9b3b2 100644 +--- a/drivers/net/ethernet/Kconfig ++++ b/drivers/net/ethernet/Kconfig +@@ -135,6 +135,7 @@ source "drivers/net/ethernet/packetengines/Kconfig" + source "drivers/net/ethernet/pasemi/Kconfig" + source "drivers/net/ethernet/qlogic/Kconfig" + source "drivers/net/ethernet/ralink/Kconfig" ++source "drivers/net/ethernet/raeth/Kconfig" + source "drivers/net/ethernet/realtek/Kconfig" + source "drivers/net/ethernet/renesas/Kconfig" + source "drivers/net/ethernet/rdc/Kconfig" +diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile +index 7c3eb7b..e66b3bb 100644 +--- a/drivers/net/ethernet/Makefile ++++ b/drivers/net/ethernet/Makefile +@@ -57,6 +57,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/ + obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/ + obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ + obj-$(CONFIG_NET_RALINK) += ralink/ ++obj-$(CONFIG_RAETH) += raeth/ + obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ + obj-$(CONFIG_SH_ETH) += renesas/ + obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ +diff --git a/drivers/net/ethernet/raeth/Kconfig b/drivers/net/ethernet/raeth/Kconfig +new file mode 100644 +index 0000000..e24b52c +--- /dev/null ++++ b/drivers/net/ethernet/raeth/Kconfig +@@ -0,0 +1,344 @@ ++ ++config RA_NAT_NONE ++ bool ++ default y ++ depends on RALINK ++ ++config MT7621_ASIC ++ bool ++ default y ++ depends on SOC_MT7621 ++ ++config RALINK_MT7621 ++ bool ++ default y ++ depends on SOC_MT7621 ++ ++config RAETH ++ tristate "Ralink GMAC" ++ depends on SOC_MT7621 ++ ---help--- ++ This driver supports Ralink gigabit ethernet family of ++ adapters. ++ ++config PDMA_NEW ++ bool ++ default y if (RALINK_MT7620 || RALINK_MT7621) ++ depends on RAETH ++ ++config RAETH_SCATTER_GATHER_RX_DMA ++ bool ++ default y if (RALINK_MT7620 || RALINK_MT7621) ++ depends on RAETH ++ ++ ++choice ++ prompt "Network BottomHalves" ++ depends on RAETH ++ default RA_NETWORK_WORKQUEUE_BH ++ ++ config RA_NETWORK_TASKLET_BH ++ bool "Tasklet" ++ ++ config RA_NETWORK_WORKQUEUE_BH ++ bool "Work Queue" ++ ++ config RAETH_NAPI ++ bool "NAPI" ++ ++endchoice ++ ++#config TASKLET_WORKQUEUE_SW ++# bool "Tasklet and Workqueue switch" ++# depends on RA_NETWORK_TASKLET_BH ++ ++config RAETH_SKB_RECYCLE_2K ++ bool "SKB Recycling" ++ depends on RAETH ++ ++config RAETH_SPECIAL_TAG ++ bool "Ralink Special Tag (0x810x)" ++ depends on RAETH && RT_3052_ESW ++ ++#config RAETH_JUMBOFRAME ++# bool "Jumbo Frame up to 4K bytes" ++# depends on RAETH && !(RALINK_RT3052 || RALINK_RT3352 || RALINK_RT5350 || RALINK_MT7628) ++ ++config RAETH_CHECKSUM_OFFLOAD ++ bool "TCP/UDP/IP checksum offload" ++ default y ++ depends on RAETH && !RALINK_RT2880 ++ ++#config RAETH_SW_FC ++# bool "When TX ring is full, inform kernel stop transmit and stop RX handler" ++# default n ++# depends on RAETH ++ ++config 32B_DESC ++ bool "32bytes TX/RX description" ++ default n ++ depends on RAETH && (RALINK_MT7620 || RALINK_MT7621) ++ ---help--- ++ At this moment, you cannot enable 32B description with Multiple RX ring at the same time. ++ ++config RAETH_LRO ++ bool "LRO (Large Receive Offload )" ++ select INET_LRO ++ depends on RAETH && (RALINK_RT6855A || RALINK_MT7620 || RALINK_MT7621) ++ ++config RAETH_HW_VLAN_TX ++ bool "Transmit VLAN HW (DoubleVLAN is not supported)" ++ depends on RAETH && !(RALINK_RT5350 || RALINK_MT7628) ++ ---help--- ++ Please disable HW_VLAN_TX if you need double vlan ++ ++config RAETH_HW_VLAN_RX ++ bool "Receive VLAN HW (DoubleVLAN is not supported)" ++ depends on RAETH && RALINK_MT7621 ++ ---help--- ++ Please disable HW_VLAN_RX if you need double vlan ++ ++config RAETH_TSO ++ bool "TSOV4 (Tcp Segmentaton Offload)" ++ depends on (RAETH_HW_VLAN_TX && (RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620)) || RALINK_MT7621 ++ ++config RAETH_TSOV6 ++ bool "TSOV6 (Tcp Segmentaton Offload)" ++ depends on RAETH_TSO ++ ++config RAETH_RW_PDMAPTR_FROM_VAR ++ bool ++ default y if RALINK_RT6855A || RALINK_MT7620 ++ depends on RAETH ++ ++#config RAETH_QOS ++# bool "QoS Feature" ++# depends on RAETH && !RALINK_RT2880 && !RALINK_MT7620 && !RALINK_MT7621 && !RAETH_TSO ++ ++choice ++ prompt "QoS Type" ++ depends on RAETH_QOS ++ default DSCP_QOS_DSCP ++ ++config RAETH_QOS_DSCP_BASED ++ bool "DSCP-based" ++ depends on RAETH_QOS ++ ++config RAETH_QOS_VPRI_BASED ++ bool "VPRI-based" ++ depends on RAETH_QOS ++ ++endchoice ++ ++config RAETH_QDMA ++ bool "Choose QDMA instead PDMA" ++ default n ++ depends on RAETH && RALINK_MT7621 ++ ++choice ++ prompt "GMAC is connected to" ++ depends on RAETH ++ default GE1_RGMII_FORCE_1000 ++ ++config GE1_MII_FORCE_100 ++ bool "MII_FORCE_100 (10/100M Switch)" ++ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621) ++ ++config GE1_MII_AN ++ bool "MII_AN (100Phy)" ++ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621) ++ ++config GE1_RVMII_FORCE_100 ++ bool "RvMII_FORCE_100 (CPU)" ++ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621) ++ ++config GE1_RGMII_FORCE_1000 ++ bool "RGMII_FORCE_1000 (GigaSW, CPU)" ++ depends on (RALINK_RT2880 || RALINK_RT3883) ++ select RALINK_SPI ++ ++config GE1_RGMII_FORCE_1000 ++ bool "RGMII_FORCE_1000 (GigaSW, CPU)" ++ depends on (RALINK_MT7621) ++ select RT_3052_ESW ++ ++config GE1_TRGMII_FORCE_1200 ++ bool "TRGMII_FORCE_1200 (GigaSW, CPU)" ++ depends on (RALINK_MT7621) ++ select RT_3052_ESW ++ ++config GE1_RGMII_AN ++ bool "RGMII_AN (GigaPhy)" ++ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621) ++ ++config GE1_RGMII_NONE ++ bool "NONE (NO CONNECT)" ++ depends on (RALINK_MT7621) ++ ++endchoice ++ ++config RT_3052_ESW ++ bool "Ralink Embedded Switch" ++ default y ++ depends on (RALINK_RT3052 || RALINK_RT3352 || RALINK_RT5350 || RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620 || RALINK_MT7621 || RALINK_MT7628) ++ ++config LAN_WAN_SUPPORT ++ bool "LAN/WAN Partition" ++ depends on RAETH_ROUTER || RT_3052_ESW ++ ++choice ++ prompt "Switch Board Layout Type" ++ depends on LAN_WAN_SUPPORT || P5_RGMII_TO_MAC_MODE || GE1_RGMII_FORCE_1000 || GE1_TRGMII_FORCE_1200 || GE2_RGMII_FORCE_1000 ++ default WAN_AT_P0 ++ ++ config WAN_AT_P4 ++ bool "LLLL/W" ++ ++ config WAN_AT_P0 ++ bool "W/LLLL" ++endchoice ++ ++config RALINK_VISTA_BASIC ++ bool 'Vista Basic Logo for IC+ 175C' ++ depends on LAN_WAN_SUPPORT && (RALINK_RT2880 || RALINK_RT3883) ++ ++config ESW_DOUBLE_VLAN_TAG ++ bool ++ default y if RT_3052_ESW ++ ++config RAETH_HAS_PORT4 ++ bool "Port 4 Support" ++ depends on RAETH && RALINK_MT7620 ++choice ++ prompt "Target Mode" ++ depends on RAETH_HAS_PORT4 ++ default P4_RGMII_TO_MAC_MODE ++ ++ config P4_MAC_TO_PHY_MODE ++ bool "Giga_Phy (RGMII)" ++ config GE_RGMII_MT7530_P0_AN ++ bool "GE_RGMII_MT7530_P0_AN (MT7530 Internal GigaPhy)" ++ config GE_RGMII_MT7530_P4_AN ++ bool "GE_RGMII_MT7530_P4_AN (MT7530 Internal GigaPhy)" ++ config P4_RGMII_TO_MAC_MODE ++ bool "Giga_SW/iNIC (RGMII)" ++ config P4_MII_TO_MAC_MODE ++ bool "External_CPU (MII_RvMII)" ++ config P4_RMII_TO_MAC_MODE ++ bool "External_CPU (RvMII_MII)" ++endchoice ++ ++config MAC_TO_GIGAPHY_MODE_ADDR2 ++ hex "Port4 Phy Address" ++ default 0x4 ++ depends on P4_MAC_TO_PHY_MODE ++ ++config RAETH_HAS_PORT5 ++ bool "Port 5 Support" ++ depends on RAETH && (RALINK_RT3052 || RALINK_RT3352 || RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620) ++choice ++ prompt "Target Mode" ++ depends on RAETH_HAS_PORT5 ++ default P5_RGMII_TO_MAC_MODE ++ ++ config P5_MAC_TO_PHY_MODE ++ bool "Giga_Phy (RGMII)" ++ config P5_RGMII_TO_MAC_MODE ++ bool "Giga_SW/iNIC (RGMII)" ++ config P5_RGMII_TO_MT7530_MODE ++ bool "MT7530 Giga_SW (RGMII)" ++ depends on RALINK_MT7620 ++ config P5_MII_TO_MAC_MODE ++ bool "External_CPU (MII_RvMII)" ++ config P5_RMII_TO_MAC_MODE ++ bool "External_CPU (RvMII_MII)" ++endchoice ++ ++config MAC_TO_GIGAPHY_MODE_ADDR ++ hex "GE1 Phy Address" ++ default 0x1F ++ depends on GE1_MII_AN || GE1_RGMII_AN ++ ++config MAC_TO_GIGAPHY_MODE_ADDR ++ hex "Port5 Phy Address" ++ default 0x5 ++ depends on P5_MAC_TO_PHY_MODE ++ ++config RAETH_GMAC2 ++ bool "GMAC2 Support" ++ depends on RAETH && (RALINK_RT3883 || RALINK_MT7621) ++ ++choice ++ prompt "GMAC2 is connected to" ++ depends on RAETH_GMAC2 ++ default GE2_RGMII_AN ++ ++config GE2_MII_FORCE_100 ++ bool "MII_FORCE_100 (10/100M Switch)" ++ depends on RAETH_GMAC2 ++ ++config GE2_MII_AN ++ bool "MII_AN (100Phy)" ++ depends on RAETH_GMAC2 ++ ++config GE2_RVMII_FORCE_100 ++ bool "RvMII_FORCE_100 (CPU)" ++ depends on RAETH_GMAC2 ++ ++config GE2_RGMII_FORCE_1000 ++ bool "RGMII_FORCE_1000 (GigaSW, CPU)" ++ depends on RAETH_GMAC2 ++ select RALINK_SPI ++ ++config GE2_RGMII_AN ++ bool "RGMII_AN (GigaPhy)" ++ depends on RAETH_GMAC2 ++ ++config GE2_INTERNAL_GPHY ++ bool "Internal GigaPHY" ++ depends on RAETH_GMAC2 ++ select LAN_WAN_SUPPORT ++ ++endchoice ++ ++config GE_RGMII_INTERNAL_P0_AN ++ bool ++ depends on GE2_INTERNAL_GPHY ++ default y if WAN_AT_P0 ++ ++config GE_RGMII_INTERNAL_P4_AN ++ bool ++ depends on GE2_INTERNAL_GPHY ++ default y if WAN_AT_P4 ++ ++config MAC_TO_GIGAPHY_MODE_ADDR2 ++ hex ++ default 0 if GE_RGMII_INTERNAL_P0_AN ++ default 4 if GE_RGMII_INTERNAL_P4_AN ++ depends on GE_RGMII_INTERNAL_P0_AN || GE_RGMII_INTERNAL_P4_AN ++ ++config MAC_TO_GIGAPHY_MODE_ADDR2 ++ hex "GE2 Phy Address" ++ default 0x1E ++ depends on GE2_MII_AN || GE2_RGMII_AN ++ ++#force 100M ++config RAETH_ROUTER ++bool ++default y if GE1_MII_FORCE_100 || GE2_MII_FORCE_100 || GE1_RVMII_FORCE_100 || GE2_RVMII_FORCE_100 ++ ++#force 1000M ++config MAC_TO_MAC_MODE ++bool ++default y if GE1_RGMII_FORCE_1000 || GE2_RGMII_FORCE_1000 ++depends on (RALINK_RT2880 || RALINK_RT3883) ++ ++#AN ++config GIGAPHY ++bool ++default y if GE1_RGMII_AN || GE2_RGMII_AN ++ ++#AN ++config 100PHY ++bool ++default y if GE1_MII_AN || GE2_MII_AN +diff --git a/drivers/net/ethernet/raeth/Makefile b/drivers/net/ethernet/raeth/Makefile +new file mode 100644 +index 0000000..94c19bd +--- /dev/null ++++ b/drivers/net/ethernet/raeth/Makefile +@@ -0,0 +1,7 @@ ++obj-$(CONFIG_RAETH) += raeth.o ++raeth-objs := ra_mac.o mii_mgr.o ++raeth-objs += raether_pdma.o ++EXTRA_CFLAGS += -DWORKQUEUE_BH ++#EXTRA_CFLAGS += -DCONFIG_RAETH_MULTIPLE_RX_RING ++ ++raeth-objs += raether.o +diff --git a/drivers/net/ethernet/raeth/ethtool_readme.txt b/drivers/net/ethernet/raeth/ethtool_readme.txt +new file mode 100644 +index 0000000..10e918b +--- /dev/null ++++ b/drivers/net/ethernet/raeth/ethtool_readme.txt +@@ -0,0 +1,44 @@ ++ ++Ethtool readme for selecting different PHY address. ++ ++Before doing any ethtool command you should make sure the current PHY ++address is expected. The default PHY address is 1(port 1). ++ ++You can change current PHY address to X(0~4) by doing follow command: ++# echo X > /proc/rt2880/gmac ++ ++Ethtool command also would show the current PHY address as following. ++ ++# ethtool eth2 ++Settings for eth2: ++ Supported ports: [ TP MII ] ++ Supported link modes: 10baseT/Half 10baseT/Full ++ 100baseT/Half 100baseT/Full ++ Supports auto-negotiation: Yes ++ Advertised link modes: 10baseT/Half 10baseT/Full ++ 100baseT/Half 100baseT/Full ++ Advertised auto-negotiation: No ++ Speed: 10Mb/s ++ Duplex: Full ++ Port: MII ++ PHYAD: 1 ++ Transceiver: internal ++ Auto-negotiation: off ++ Current message level: 0x00000000 (0) ++ Link detected: no ++ ++ ++The "PHYAD" field shows the current PHY address. ++ ++ ++ ++Usage example ++1) show port1 info ++# echo 1 > /proc/rt2880/gmac # change phy address to 1 ++# ethtool eth2 ++ ++2) show port0 info ++# echo 0 > /proc/rt2880/gmac # change phy address to 0 ++# ethtool eth2 ++ ++ +diff --git a/drivers/net/ethernet/raeth/mii_mgr.c b/drivers/net/ethernet/raeth/mii_mgr.c +new file mode 100644 +index 0000000..3de0a74 +--- /dev/null ++++ b/drivers/net/ethernet/raeth/mii_mgr.c +@@ -0,0 +1,166 @@ ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/netdevice.h> ++ ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0) ++#include <asm/rt2880/rt_mmap.h> ++#endif ++ ++#include "ra2882ethreg.h" ++#include "raether.h" ++ ++ ++#define PHY_CONTROL_0 0x0004 ++#define MDIO_PHY_CONTROL_0 (RALINK_ETH_SW_BASE + PHY_CONTROL_0) ++#define enable_mdio(x) ++ ++ ++u32 __mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data) ++{ ++ u32 volatile status = 0; ++ u32 rc = 0; ++ unsigned long volatile t_start = jiffies; ++ u32 volatile data = 0; ++ ++ /* We enable mdio gpio purpose register, and disable it when exit. */ ++ enable_mdio(1); ++ ++ // make sure previous read operation is complete ++ while (1) { ++ // 0 : Read/write operation complete ++ if(!( sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) ++ { ++ break; ++ } ++ else if (time_after(jiffies, t_start + 5*HZ)) { ++ enable_mdio(0); ++ printk("\n MDIO Read operation is ongoing !!\n"); ++ return rc; ++ } ++ } ++ ++ data = (0x01 << 16) | (0x02 << 18) | (phy_addr << 20) | (phy_register << 25); ++ sysRegWrite(MDIO_PHY_CONTROL_0, data); ++ data |= (1<<31); ++ sysRegWrite(MDIO_PHY_CONTROL_0, data); ++ //printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0); ++ ++ ++ // make sure read operation is complete ++ t_start = jiffies; ++ while (1) { ++ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) { ++ status = sysRegRead(MDIO_PHY_CONTROL_0); ++ *read_data = (u32)(status & 0x0000FFFF); ++ ++ enable_mdio(0); ++ return 1; ++ } ++ else if (time_after(jiffies, t_start+5*HZ)) { ++ enable_mdio(0); ++ printk("\n MDIO Read operation is ongoing and Time Out!!\n"); ++ return 0; ++ } ++ } ++} ++ ++u32 __mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data) ++{ ++ unsigned long volatile t_start=jiffies; ++ u32 volatile data; ++ ++ enable_mdio(1); ++ ++ // make sure previous write operation is complete ++ while(1) { ++ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) ++ { ++ break; ++ } ++ else if (time_after(jiffies, t_start + 5 * HZ)) { ++ enable_mdio(0); ++ printk("\n MDIO Write operation ongoing\n"); ++ return 0; ++ } ++ } ++ /*add 1 us delay to make sequencial write more robus*/ ++ udelay(1); ++ ++ data = (0x01 << 16)| (1<<18) | (phy_addr << 20) | (phy_register << 25) | write_data; ++ sysRegWrite(MDIO_PHY_CONTROL_0, data); ++ data |= (1<<31); ++ sysRegWrite(MDIO_PHY_CONTROL_0, data); //start operation ++ //printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0); ++ ++ t_start = jiffies; ++ ++ // make sure write operation is complete ++ while (1) { ++ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) //0 : Read/write operation complete ++ { ++ enable_mdio(0); ++ return 1; ++ } ++ else if (time_after(jiffies, t_start + 5 * HZ)) { ++ enable_mdio(0); ++ printk("\n MDIO Write operation Time Out\n"); ++ return 0; ++ } ++ } ++} ++ ++u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data) ++{ ++ u32 low_word; ++ u32 high_word; ++ if(phy_addr==31) ++ { ++ //phase1: write page address phase ++ if(__mii_mgr_write(phy_addr, 0x1f, ((phy_register >> 6) & 0x3FF))) { ++ //phase2: write address & read low word phase ++ if(__mii_mgr_read(phy_addr, (phy_register >> 2) & 0xF, &low_word)) { ++ //phase3: write address & read high word phase ++ if(__mii_mgr_read(phy_addr, (0x1 << 4), &high_word)) { ++ *read_data = (high_word << 16) | (low_word & 0xFFFF); ++ return 1; ++ } ++ } ++ } ++ } else ++ { ++ if(__mii_mgr_read(phy_addr, phy_register, read_data)) { ++ return 1; ++ } ++ } ++ ++ return 0; ++} ++ ++u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data) ++{ ++ if(phy_addr == 31) ++ { ++ //phase1: write page address phase ++ if(__mii_mgr_write(phy_addr, 0x1f, (phy_register >> 6) & 0x3FF)) { ++ //phase2: write address & read low word phase ++ if(__mii_mgr_write(phy_addr, ((phy_register >> 2) & 0xF), write_data & 0xFFFF)) { ++ //phase3: write address & read high word phase ++ if(__mii_mgr_write(phy_addr, (0x1 << 4), write_data >> 16)) { ++ return 1; ++ } ++ } ++ } ++ } else ++ { ++ if(__mii_mgr_write(phy_addr, phy_register, write_data)) { ++ return 1; ++ } ++ } ++ ++ return 0; ++} ++ ++EXPORT_SYMBOL(mii_mgr_write); ++EXPORT_SYMBOL(mii_mgr_read); +diff --git a/drivers/net/ethernet/raeth/ra2882ethreg.h b/drivers/net/ethernet/raeth/ra2882ethreg.h +new file mode 100644 +index 0000000..05b789e +--- /dev/null ++++ b/drivers/net/ethernet/raeth/ra2882ethreg.h +@@ -0,0 +1,1268 @@ ++#ifndef RA2882ETHREG_H ++#define RA2882ETHREG_H ++ ++#include <linux/mii.h> // for struct mii_if_info in ra2882ethreg.h ++#include <linux/version.h> /* check linux version for 2.4 and 2.6 compatibility */ ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++#include <asm/rt2880/rt_mmap.h> ++#endif ++#include "raether.h" ++ ++#ifdef WORKQUEUE_BH ++#include <linux/workqueue.h> ++#endif // WORKQUEUE_BH // ++#ifdef CONFIG_RAETH_LRO ++#include <linux/inet_lro.h> ++#endif ++ ++#define MAX_PACKET_SIZE 1514 ++#define MIN_PACKET_SIZE 60 ++ ++#define phys_to_bus(a) (a & 0x1FFFFFFF) ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36) ++#define BIT(x) ((1 << x)) ++#endif ++#define ETHER_ADDR_LEN 6 ++ ++/* Phy Vender ID list */ ++ ++#define EV_ICPLUS_PHY_ID0 0x0243 ++#define EV_ICPLUS_PHY_ID1 0x0D90 ++#define EV_MARVELL_PHY_ID0 0x0141 ++#define EV_MARVELL_PHY_ID1 0x0CC2 ++#define EV_VTSS_PHY_ID0 0x0007 ++#define EV_VTSS_PHY_ID1 0x0421 ++ ++/* ++ FE_INT_STATUS ++*/ ++#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628) ++ ++#define RX_COHERENT BIT(31) ++#define RX_DLY_INT BIT(30) ++#define TX_COHERENT BIT(29) ++#define TX_DLY_INT BIT(28) ++ ++#define RX_DONE_INT1 BIT(17) ++#define RX_DONE_INT0 BIT(16) ++ ++#define TX_DONE_INT3 BIT(3) ++#define TX_DONE_INT2 BIT(2) ++#define TX_DONE_INT1 BIT(1) ++#define TX_DONE_INT0 BIT(0) ++ ++#if defined (CONFIG_RALINK_MT7621) ++#define RLS_COHERENT BIT(29) ++#define RLS_DLY_INT BIT(28) ++#define RLS_DONE_INT BIT(0) ++#endif ++ ++#else ++//#define CNT_PPE_AF BIT(31) ++//#define CNT_GDM_AF BIT(29) ++#define PSE_P2_FC BIT(26) ++#define GDM_CRC_DROP BIT(25) ++#define PSE_BUF_DROP BIT(24) ++#define GDM_OTHER_DROP BIT(23) ++#define PSE_P1_FC BIT(22) ++#define PSE_P0_FC BIT(21) ++#define PSE_FQ_EMPTY BIT(20) ++#define GE1_STA_CHG BIT(18) ++#define TX_COHERENT BIT(17) ++#define RX_COHERENT BIT(16) ++ ++#define TX_DONE_INT3 BIT(11) ++#define TX_DONE_INT2 BIT(10) ++#define TX_DONE_INT1 BIT(9) ++#define TX_DONE_INT0 BIT(8) ++#define RX_DONE_INT1 RX_DONE_INT0 ++#define RX_DONE_INT0 BIT(2) ++#define TX_DLY_INT BIT(1) ++#define RX_DLY_INT BIT(0) ++#endif ++ ++#define FE_INT_ALL (TX_DONE_INT3 | TX_DONE_INT2 | \ ++ TX_DONE_INT1 | TX_DONE_INT0 | \ ++ RX_DONE_INT0 ) ++ ++#if defined (CONFIG_RALINK_MT7621) ++#define QFE_INT_ALL (RLS_DONE_INT | RX_DONE_INT0 | RX_DONE_INT1) ++#define QFE_INT_DLY_INIT (RLS_DLY_INT | RX_DLY_INT) ++ ++#define NUM_QDMA_PAGE 256 ++#define QDMA_PAGE_SIZE 2048 ++#endif ++/* ++ * SW_INT_STATUS ++ */ ++#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628) ++#define PORT0_QUEUE_FULL BIT(14) //port0 queue full ++#define PORT1_QUEUE_FULL BIT(15) //port1 queue full ++#define PORT2_QUEUE_FULL BIT(16) //port2 queue full ++#define PORT3_QUEUE_FULL BIT(17) //port3 queue full ++#define PORT4_QUEUE_FULL BIT(18) //port4 queue full ++#define PORT5_QUEUE_FULL BIT(19) //port5 queue full ++#define PORT6_QUEUE_FULL BIT(20) //port6 queue full ++#define SHARED_QUEUE_FULL BIT(23) //shared queue full ++#define QUEUE_EXHAUSTED BIT(24) //global queue is used up and all packets are dropped ++#define BC_STROM BIT(25) //the device is undergoing broadcast storm ++#define PORT_ST_CHG BIT(26) //Port status change ++#define UNSECURED_ALERT BIT(27) //Intruder alert ++#define ABNORMAL_ALERT BIT(28) //Abnormal ++ ++#define ESW_ISR (RALINK_ETH_SW_BASE + 0x00) ++#define ESW_IMR (RALINK_ETH_SW_BASE + 0x04) ++#define ESW_INT_ALL (PORT_ST_CHG) ++ ++#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) ++#define MIB_INT BIT(25) ++#define ACL_INT BIT(24) ++#define P5_LINK_CH BIT(5) ++#define P4_LINK_CH BIT(4) ++#define P3_LINK_CH BIT(3) ++#define P2_LINK_CH BIT(2) ++#define P1_LINK_CH BIT(1) ++#define P0_LINK_CH BIT(0) ++ ++#define RX_GOCT_CNT BIT(4) ++#define RX_GOOD_CNT BIT(6) ++#define TX_GOCT_CNT BIT(17) ++#define TX_GOOD_CNT BIT(19) ++ ++#define MSK_RX_GOCT_CNT BIT(4) ++#define MSK_RX_GOOD_CNT BIT(6) ++#define MSK_TX_GOCT_CNT BIT(17) ++#define MSK_TX_GOOD_CNT BIT(19) ++#define MSK_CNT_INT_ALL (MSK_RX_GOCT_CNT | MSK_RX_GOOD_CNT | MSK_TX_GOCT_CNT | MSK_TX_GOOD_CNT) ++//#define MSK_CNT_INT_ALL (MSK_RX_GOOD_CNT | MSK_TX_GOOD_CNT) ++ ++ ++#define ESW_IMR (RALINK_ETH_SW_BASE + 0x7000 + 0x8) ++#define ESW_ISR (RALINK_ETH_SW_BASE + 0x7000 + 0xC) ++#define ESW_INT_ALL (P0_LINK_CH | P1_LINK_CH | P2_LINK_CH | P3_LINK_CH | P4_LINK_CH | P5_LINK_CH | ACL_INT | MIB_INT) ++#define ESW_AISR (RALINK_ETH_SW_BASE + 0x8) ++#define ESW_P0_IntSn (RALINK_ETH_SW_BASE + 0x4004) ++#define ESW_P1_IntSn (RALINK_ETH_SW_BASE + 0x4104) ++#define ESW_P2_IntSn (RALINK_ETH_SW_BASE + 0x4204) ++#define ESW_P3_IntSn (RALINK_ETH_SW_BASE + 0x4304) ++#define ESW_P4_IntSn (RALINK_ETH_SW_BASE + 0x4404) ++#define ESW_P5_IntSn (RALINK_ETH_SW_BASE + 0x4504) ++#define ESW_P6_IntSn (RALINK_ETH_SW_BASE + 0x4604) ++#define ESW_P0_IntMn (RALINK_ETH_SW_BASE + 0x4008) ++#define ESW_P1_IntMn (RALINK_ETH_SW_BASE + 0x4108) ++#define ESW_P2_IntMn (RALINK_ETH_SW_BASE + 0x4208) ++#define ESW_P3_IntMn (RALINK_ETH_SW_BASE + 0x4308) ++#define ESW_P4_IntMn (RALINK_ETH_SW_BASE + 0x4408) ++#define ESW_P5_IntMn (RALINK_ETH_SW_BASE + 0x4508) ++#define ESW_P6_IntMn (RALINK_ETH_SW_BASE + 0x4608) ++ ++#if defined (CONFIG_RALINK_MT7620) ++#define ESW_P7_IntSn (RALINK_ETH_SW_BASE + 0x4704) ++#define ESW_P7_IntMn (RALINK_ETH_SW_BASE + 0x4708) ++#endif ++ ++ ++#define ESW_PHY_POLLING (RALINK_ETH_SW_BASE + 0x7000) ++ ++#elif defined (CONFIG_RALINK_MT7621) ++ ++#define ESW_PHY_POLLING (RALINK_ETH_SW_BASE + 0x0000) ++ ++#define P5_LINK_CH BIT(5) ++#define P4_LINK_CH BIT(4) ++#define P3_LINK_CH BIT(3) ++#define P2_LINK_CH BIT(2) ++#define P1_LINK_CH BIT(1) ++#define P0_LINK_CH BIT(0) ++ ++ ++#endif // CONFIG_RALINK_RT3052 || CONFIG_RALINK_RT3352 || CONFIG_RALINK_RT5350 || defined (CONFIG_RALINK_MT7628)// ++ ++#define RX_BUF_ALLOC_SIZE 2000 ++#define FASTPATH_HEADROOM 64 ++ ++#define ETHER_BUFFER_ALIGN 32 ///// Align on a cache line ++ ++#define ETHER_ALIGNED_RX_SKB_ADDR(addr) \ ++ ((((unsigned long)(addr) + ETHER_BUFFER_ALIGN - 1) & \ ++ ~(ETHER_BUFFER_ALIGN - 1)) - (unsigned long)(addr)) ++ ++#ifdef CONFIG_PSEUDO_SUPPORT ++typedef struct _PSEUDO_ADAPTER { ++ struct net_device *RaethDev; ++ struct net_device *PseudoDev; ++ struct net_device_stats stat; ++#if defined (CONFIG_ETHTOOL) /*&& defined (CONFIG_RAETH_ROUTER)*/ ++ struct mii_if_info mii_info; ++#endif ++ ++} PSEUDO_ADAPTER, PPSEUDO_ADAPTER; ++ ++#define MAX_PSEUDO_ENTRY 1 ++#endif ++ ++ ++ ++/* Register Categories Definition */ ++#define RAFRAMEENGINE_OFFSET 0x0000 ++#define RAGDMA_OFFSET 0x0020 ++#define RAPSE_OFFSET 0x0040 ++#define RAGDMA2_OFFSET 0x0060 ++#define RACDMA_OFFSET 0x0080 ++#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628) ++ ++#define RAPDMA_OFFSET 0x0800 ++#define SDM_OFFSET 0x0C00 ++#else ++#define RAPDMA_OFFSET 0x0100 ++#endif ++#define RAPPE_OFFSET 0x0200 ++#define RACMTABLE_OFFSET 0x0400 ++#define RAPOLICYTABLE_OFFSET 0x1000 ++ ++ ++/* Register Map Detail */ ++/* RT3883 */ ++#define SYSCFG1 (RALINK_SYSCTL_BASE + 0x14) ++ ++#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628) ++ ++/* 1. PDMA */ ++#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x000) ++#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x004) ++#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x008) ++#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x00C) ++ ++#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x010) ++#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x014) ++#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x018) ++#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x01C) ++ ++#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x020) ++#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x024) ++#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x028) ++#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x02C) ++ ++#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x030) ++#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x034) ++#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x038) ++#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x03C) ++ ++#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x100) ++#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x104) ++#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x108) ++#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x10C) ++ ++#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x110) ++#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x114) ++#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x118) ++#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x11C) ++ ++#define PDMA_INFO (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x200) ++#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x204) ++#define PDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x208) ++#define PDMA_RST_CFG (PDMA_RST_IDX) ++#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x20C) ++#define FREEQ_THRES (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x210) ++#define INT_STATUS (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x220) ++#define FE_INT_STATUS (INT_STATUS) ++#define INT_MASK (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x228) ++#define FE_INT_ENABLE (INT_MASK) ++#define PDMA_WRR (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x280) ++#define PDMA_SCH_CFG (PDMA_WRR) ++ ++#define SDM_CON (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x00) //Switch DMA configuration ++#define SDM_RRING (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x04) //Switch DMA Rx Ring ++#define SDM_TRING (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x08) //Switch DMA Tx Ring ++#define SDM_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x0C) //Switch MAC address LSB ++#define SDM_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x10) //Switch MAC Address MSB ++#define SDM_TPCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x100) //Switch DMA Tx packet count ++#define SDM_TBCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x104) //Switch DMA Tx byte count ++#define SDM_RPCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x108) //Switch DMA rx packet count ++#define SDM_RBCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x10C) //Switch DMA rx byte count ++#define SDM_CS_ERR (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x110) //Switch DMA rx checksum error count ++ ++#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) ++ ++/* Old FE with New PDMA */ ++#define PDMA_RELATED 0x0800 ++/* 1. PDMA */ ++#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x000) ++#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x004) ++#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x008) ++#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x00C) ++ ++#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x010) ++#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x014) ++#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x018) ++#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x01C) ++ ++#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x020) ++#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x024) ++#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x028) ++#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x02C) ++ ++#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x030) ++#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x034) ++#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x038) ++#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x03C) ++ ++#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x100) ++#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x104) ++#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x108) ++#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x10C) ++ ++#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x110) ++#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x114) ++#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x118) ++#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x11C) ++ ++#define PDMA_INFO (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x200) ++#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x204) ++#define PDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x208) ++#define PDMA_RST_CFG (PDMA_RST_IDX) ++#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x20C) ++#define FREEQ_THRES (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x210) ++#define INT_STATUS (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x220) ++#define FE_INT_STATUS (INT_STATUS) ++#define INT_MASK (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x228) ++#define FE_INT_ENABLE (INT_MASK) ++#define SCH_Q01_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x280) ++#define SCH_Q23_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x284) ++ ++#define FE_GLO_CFG RALINK_FRAME_ENGINE_BASE + 0x00 ++#define FE_RST_GL RALINK_FRAME_ENGINE_BASE + 0x04 ++#define FE_INT_STATUS2 RALINK_FRAME_ENGINE_BASE + 0x08 ++#define FE_INT_ENABLE2 RALINK_FRAME_ENGINE_BASE + 0x0c ++//#define FC_DROP_STA RALINK_FRAME_ENGINE_BASE + 0x18 ++#define FOE_TS_T RALINK_FRAME_ENGINE_BASE + 0x10 ++ ++#if defined (CONFIG_RALINK_MT7620) ++#define GDMA1_RELATED 0x0600 ++#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00) ++#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04) ++#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08) ++#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C) ++#elif defined (CONFIG_RALINK_MT7621) ++#define GDMA1_RELATED 0x0500 ++#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00) ++#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04) ++#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08) ++#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C) ++ ++#define GDMA2_RELATED 0x1500 ++#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x00) ++#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x04) ++#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x08) ++#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x0C) ++#else ++#define GDMA1_RELATED 0x0020 ++#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00) ++#define GDMA1_SCH_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04) ++#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08) ++#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C) ++#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x10) ++ ++#define GDMA2_RELATED 0x0060 ++#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x00) ++#define GDMA2_SCH_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x04) ++#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x08) ++#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x0C) ++#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x10) ++#endif ++ ++#if defined (CONFIG_RALINK_MT7620) ++#define PSE_RELATED 0x0500 ++#define PSE_FQFC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x00) ++#define PSE_IQ_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x04) ++#define PSE_QUE_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x08) ++#else ++#define PSE_RELATED 0x0040 ++#define PSE_FQ_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x00) ++#define CDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x04) ++#define GDMA1_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x08) ++#define GDMA2_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x0C) ++#define CDMA_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x10) ++#define GDMA1_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x14) ++#define GDMA2_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x18) ++#define PSE_IQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x1C) ++#endif ++ ++ ++#if defined (CONFIG_RALINK_MT7620) ++#define CDMA_RELATED 0x0400 ++#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00) ++#define SMACCR0 (RALINK_ETH_SW_BASE + 0x3FE4) ++#define SMACCR1 (RALINK_ETH_SW_BASE + 0x3FE8) ++#define CKGCR (RALINK_ETH_SW_BASE + 0x3FF0) ++#elif defined (CONFIG_RALINK_MT7621) ++#define CDMA_RELATED 0x0400 ++#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00) //fake definition ++#define CDMP_IG_CTRL (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00) ++#define CDMP_EG_CTRL (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x04) ++#else ++#define CDMA_RELATED 0x0080 ++#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00) ++#define CDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x04) ++#define SMACCR0 (RALINK_ETH_SW_BASE + 0x30E4) ++#define SMACCR1 (RALINK_ETH_SW_BASE + 0x30E8) ++#define CKGCR (RALINK_ETH_SW_BASE + 0x30F0) ++#endif ++ ++#define PDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+0x100) ++ ++ ++#if defined (CONFIG_RALINK_MT7621) ++/*kurtis: add QDMA define*/ ++ ++#define CLK_CFG_0 (RALINK_SYSCTL_BASE + 0x2C) ++#define PAD_RGMII2_MDIO_CFG (RALINK_SYSCTL_BASE + 0x58) ++ ++#define QDMA_RELATED 0x1800 ++#define QTX_CFG_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x000) ++#define QTX_SCH_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x004) ++#define QTX_HEAD_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x008) ++#define QTX_TAIL_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x00C) ++#define QTX_CFG_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x010) ++#define QTX_SCH_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x014) ++#define QTX_HEAD_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x018) ++#define QTX_TAIL_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x01C) ++#define QTX_CFG_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x020) ++#define QTX_SCH_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x024) ++#define QTX_HEAD_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x028) ++#define QTX_TAIL_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x02C) ++#define QTX_CFG_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x030) ++#define QTX_SCH_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x034) ++#define QTX_HEAD_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x038) ++#define QTX_TAIL_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x03C) ++#define QTX_CFG_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x040) ++#define QTX_SCH_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x044) ++#define QTX_HEAD_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x048) ++#define QTX_TAIL_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x04C) ++#define QTX_CFG_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x050) ++#define QTX_SCH_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x054) ++#define QTX_HEAD_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x058) ++#define QTX_TAIL_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x05C) ++#define QTX_CFG_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x060) ++#define QTX_SCH_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x064) ++#define QTX_HEAD_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x068) ++#define QTX_TAIL_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x06C) ++#define QTX_CFG_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x070) ++#define QTX_SCH_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x074) ++#define QTX_HEAD_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x078) ++#define QTX_TAIL_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x07C) ++#define QTX_CFG_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x080) ++#define QTX_SCH_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x084) ++#define QTX_HEAD_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x088) ++#define QTX_TAIL_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x08C) ++#define QTX_CFG_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x090) ++#define QTX_SCH_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x094) ++#define QTX_HEAD_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x098) ++#define QTX_TAIL_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x09C) ++#define QTX_CFG_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A0) ++#define QTX_SCH_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A4) ++#define QTX_HEAD_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A8) ++#define QTX_TAIL_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0AC) ++#define QTX_CFG_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B0) ++#define QTX_SCH_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B4) ++#define QTX_HEAD_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B8) ++#define QTX_TAIL_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0BC) ++#define QTX_CFG_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C0) ++#define QTX_SCH_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C4) ++#define QTX_HEAD_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C8) ++#define QTX_TAIL_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0CC) ++#define QTX_CFG_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D0) ++#define QTX_SCH_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D4) ++#define QTX_HEAD_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D8) ++#define QTX_TAIL_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0DC) ++#define QTX_CFG_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E0) ++#define QTX_SCH_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E4) ++#define QTX_HEAD_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E8) ++#define QTX_TAIL_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0EC) ++#define QTX_CFG_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F0) ++#define QTX_SCH_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F4) ++#define QTX_HEAD_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F8) ++#define QTX_TAIL_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0FC) ++#define QRX_BASE_PTR_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x100) ++#define QRX_MAX_CNT_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x104) ++#define QRX_CRX_IDX_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x108) ++#define QRX_DRX_IDX_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x10C) ++#define QRX_BASE_PTR_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x110) ++#define QRX_MAX_CNT_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x114) ++#define QRX_CRX_IDX_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x118) ++#define QRX_DRX_IDX_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x11C) ++#define QDMA_INFO (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x200) ++#define QDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x204) ++#define QDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x208) ++#define QDMA_RST_CFG (QDMA_RST_IDX) ++#define QDMA_DELAY_INT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x20C) ++#define QDMA_FC_THRES (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x210) ++#define QDMA_TX_SCH (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x214) ++#define QDMA_INT_STS (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x218) ++#define QFE_INT_STATUS (QDMA_INT_STS) ++#define QDMA_INT_MASK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x21C) ++#define QFE_INT_ENABLE (QDMA_INT_MASK) ++#define QDMA_TRTCM (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x220) ++#define QDMA_DATA0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x224) ++#define QDMA_DATA1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x228) ++#define QDMA_RED_THRES (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x22C) ++#define QDMA_TEST (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x230) ++#define QDMA_DMA (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x234) ++#define QDMA_BMU (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x238) ++#define QDMA_HRED1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x240) ++#define QDMA_HRED2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x244) ++#define QDMA_SRED1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x248) ++#define QDMA_SRED2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x24C) ++#define QTX_CTX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x300) ++#define QTX_DTX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x304) ++#define QTX_FWD_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x308) ++#define QTX_CRX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x310) ++#define QTX_DRX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x314) ++#define QTX_RLS_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x318) ++#define QDMA_FQ_HEAD (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x320) ++#define QDMA_FQ_TAIL (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x324) ++#define QDMA_FQ_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x328) ++#define QDMA_FQ_BLEN (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x32C) ++#define QTX_Q0MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x350) ++#define QTX_Q1MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x354) ++#define QTX_Q2MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x358) ++#define QTX_Q3MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x35C) ++#define QTX_Q0MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x360) ++#define QTX_Q1MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x364) ++#define QTX_Q2MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x368) ++#define QTX_Q3MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x36C) ++ ++ ++#endif/*MT7621 QDMA*/ ++ ++#else ++ ++/* 1. Frame Engine Global Registers */ ++#define MDIO_ACCESS (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x00) ++#define MDIO_CFG (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x04) ++#define FE_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x08) ++#define FE_RST_GL (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x0C) ++#define FE_INT_STATUS (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x10) ++#define FE_INT_ENABLE (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x14) ++#define MDIO_CFG2 (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x18) //Original:FC_DROP_STA ++#define FOC_TS_T (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x1C) ++ ++ ++/* 2. GDMA Registers */ ++#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x00) ++#define GDMA1_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x04) ++#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x08) ++#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x0C) ++#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x10) ++ ++#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x00) ++#define GDMA2_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x04) ++#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x08) ++#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x0C) ++#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x10) ++ ++/* 3. PSE */ ++#define PSE_FQ_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x00) ++#define CDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x04) ++#define GDMA1_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x08) ++#define GDMA2_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x0C) ++#define PDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+0x1f0) ++ ++/* 4. CDMA */ ++#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE+RACDMA_OFFSET+0x00) ++#define CDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RACDMA_OFFSET+0x04) ++/* skip ppoe sid and vlan id definition */ ++ ++ ++/* 5. PDMA */ ++#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x00) ++#define PDMA_RST_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x04) ++#define PDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x08) ++ ++#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x0C) ++ ++#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x10) ++#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x14) ++#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x18) ++#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x1C) ++ ++#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x20) ++#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x24) ++#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x28) ++#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x2C) ++ ++#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x40) ++#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x44) ++#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x48) ++#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x4C) ++ ++#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x50) ++#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x54) ++#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x58) ++#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x5C) ++ ++#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x30) ++#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x34) ++#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x38) ++#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x3C) ++ ++#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x40) ++#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x44) ++#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x48) ++#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x4C) ++ ++#endif ++ ++#define DELAY_INT_INIT 0x84048404 ++#define FE_INT_DLY_INIT (TX_DLY_INT | RX_DLY_INT) ++ ++ ++#if !defined (CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628) ++ ++/* 6. Counter and Meter Table */ ++#define PPE_AC_BCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x000) /* PPE Accounting Group 0 Byte Cnt */ ++#define PPE_AC_PCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x004) /* PPE Accounting Group 0 Packet Cnt */ ++/* 0 ~ 63 */ ++ ++#define PPE_MTR_CNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x200) /* 0 ~ 63 */ ++/* skip... */ ++#define PPE_MTR_CNT63 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x2FC) ++ ++#define GDMA_TX_GBCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x300) /* Transmit good byte cnt for GEport */ ++#define GDMA_TX_GPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x304) /* Transmit good pkt cnt for GEport */ ++#define GDMA_TX_SKIPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x308) /* Transmit skip cnt for GEport */ ++#define GDMA_TX_COLCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x30C) /* Transmit collision cnt for GEport */ ++ ++/* update these address mapping to fit data sheet v0.26, by bobtseng, 2007.6.14 */ ++#define GDMA_RX_GBCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x320) ++#define GDMA_RX_GPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x324) ++#define GDMA_RX_OERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x328) ++#define GDMA_RX_FERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x32C) ++#define GDMA_RX_SERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x330) ++#define GDMA_RX_LERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x334) ++#define GDMA_RX_CERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x338) ++#define GDMA_RX_FCCNT1 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x33C) ++ ++#endif ++ ++ ++/* Per Port Packet Counts in RT3052, added by bobtseng 2009.4.17. */ ++#define PORT0_PKCOUNT (0xb01100e8) ++#define PORT1_PKCOUNT (0xb01100ec) ++#define PORT2_PKCOUNT (0xb01100f0) ++#define PORT3_PKCOUNT (0xb01100f4) ++#define PORT4_PKCOUNT (0xb01100f8) ++#define PORT5_PKCOUNT (0xb01100fc) ++ ++ ++// PHYS_TO_K1 ++#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr) ++ ++ ++#define sysRegRead(phys) \ ++ (*(volatile unsigned int *)PHYS_TO_K1(phys)) ++ ++#define sysRegWrite(phys, val) \ ++ ((*(volatile unsigned int *)PHYS_TO_K1(phys)) = (val)) ++ ++#define u_long unsigned long ++#define u32 unsigned int ++#define u16 unsigned short ++ ++ ++/* ====================================== */ ++#define GDM1_DISPAD BIT(18) ++#define GDM1_DISCRC BIT(17) ++ ++//GDMA1 uni-cast frames destination port ++#define GDM1_ICS_EN (0x1 << 22) ++#define GDM1_TCS_EN (0x1 << 21) ++#define GDM1_UCS_EN (0x1 << 20) ++#define GDM1_JMB_EN (0x1 << 19) ++#define GDM1_STRPCRC (0x1 << 16) ++#define GDM1_UFRC_P_CPU (0 << 12) ++#if defined (CONFIG_RALINK_MT7621) ++#define GDM1_UFRC_P_PPE (4 << 12) ++#else ++#define GDM1_UFRC_P_PPE (6 << 12) ++#endif ++ ++//GDMA1 broad-cast MAC address frames ++#define GDM1_BFRC_P_CPU (0 << 8) ++#if defined (CONFIG_RALINK_MT7621) ++#define GDM1_BFRC_P_PPE (4 << 8) ++#else ++#define GDM1_BFRC_P_PPE (6 << 8) ++#endif ++ ++//GDMA1 multi-cast MAC address frames ++#define GDM1_MFRC_P_CPU (0 << 4) ++#if defined (CONFIG_RALINK_MT7621) ++#define GDM1_MFRC_P_PPE (4 << 4) ++#else ++#define GDM1_MFRC_P_PPE (6 << 4) ++#endif ++ ++//GDMA1 other MAC address frames destination port ++#define GDM1_OFRC_P_CPU (0 << 0) ++#if defined (CONFIG_RALINK_MT7621) ++#define GDM1_OFRC_P_PPE (4 << 0) ++#else ++#define GDM1_OFRC_P_PPE (6 << 0) ++#endif ++ ++#if defined (CONFIG_RALINK_RT6856) || defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) ++/* checksum generator registers are removed */ ++#define ICS_GEN_EN (0 << 2) ++#define UCS_GEN_EN (0 << 1) ++#define TCS_GEN_EN (0 << 0) ++#else ++#define ICS_GEN_EN (1 << 2) ++#define UCS_GEN_EN (1 << 1) ++#define TCS_GEN_EN (1 << 0) ++#endif ++ ++// MDIO_CFG bit ++#define MDIO_CFG_GP1_FC_TX (1 << 11) ++#define MDIO_CFG_GP1_FC_RX (1 << 10) ++ ++/* ====================================== */ ++/* ====================================== */ ++#define GP1_LNK_DWN BIT(9) ++#define GP1_AN_FAIL BIT(8) ++/* ====================================== */ ++/* ====================================== */ ++#define PSE_RESET BIT(0) ++/* ====================================== */ ++#define PST_DRX_IDX1 BIT(17) ++#define PST_DRX_IDX0 BIT(16) ++#define PST_DTX_IDX3 BIT(3) ++#define PST_DTX_IDX2 BIT(2) ++#define PST_DTX_IDX1 BIT(1) ++#define PST_DTX_IDX0 BIT(0) ++ ++#define RX_2B_OFFSET BIT(31) ++#define DESC_32B_EN BIT(8) ++#define TX_WB_DDONE BIT(6) ++#define RX_DMA_BUSY BIT(3) ++#define TX_DMA_BUSY BIT(1) ++#define RX_DMA_EN BIT(2) ++#define TX_DMA_EN BIT(0) ++ ++#define PDMA_BT_SIZE_4DWORDS (0<<4) ++#define PDMA_BT_SIZE_8DWORDS (1<<4) ++#define PDMA_BT_SIZE_16DWORDS (2<<4) ++#define PDMA_BT_SIZE_32DWORDS (3<<4) ++ ++/* Register bits. ++ */ ++ ++#define MACCFG_RXEN (1<<2) ++#define MACCFG_TXEN (1<<3) ++#define MACCFG_PROMISC (1<<18) ++#define MACCFG_RXMCAST (1<<19) ++#define MACCFG_FDUPLEX (1<<20) ++#define MACCFG_PORTSEL (1<<27) ++#define MACCFG_HBEATDIS (1<<28) ++ ++ ++#define DMACTL_SR (1<<1) /* Start/Stop Receive */ ++#define DMACTL_ST (1<<13) /* Start/Stop Transmission Command */ ++ ++#define DMACFG_SWR (1<<0) /* Software Reset */ ++#define DMACFG_BURST32 (32<<8) ++ ++#define DMASTAT_TS 0x00700000 /* Transmit Process State */ ++#define DMASTAT_RS 0x000e0000 /* Receive Process State */ ++ ++#define MACCFG_INIT 0 //(MACCFG_FDUPLEX) // | MACCFG_PORTSEL) ++ ++ ++ ++/* Descriptor bits. ++ */ ++#define R_OWN 0x80000000 /* Own Bit */ ++#define RD_RER 0x02000000 /* Receive End Of Ring */ ++#define RD_LS 0x00000100 /* Last Descriptor */ ++#define RD_ES 0x00008000 /* Error Summary */ ++#define RD_CHAIN 0x01000000 /* Chained */ ++ ++/* Word 0 */ ++#define T_OWN 0x80000000 /* Own Bit */ ++#define TD_ES 0x00008000 /* Error Summary */ ++ ++/* Word 1 */ ++#define TD_LS 0x40000000 /* Last Segment */ ++#define TD_FS 0x20000000 /* First Segment */ ++#define TD_TER 0x08000000 /* Transmit End Of Ring */ ++#define TD_CHAIN 0x01000000 /* Chained */ ++ ++ ++#define TD_SET 0x08000000 /* Setup Packet */ ++ ++ ++#define POLL_DEMAND 1 ++ ++#define RSTCTL (0x34) ++#define RSTCTL_RSTENET1 (1<<19) ++#define RSTCTL_RSTENET2 (1<<20) ++ ++#define INIT_VALUE_OF_RT2883_PSE_FQ_CFG 0xff908000 ++#define INIT_VALUE_OF_PSE_FQFC_CFG 0x80504000 ++#define INIT_VALUE_OF_FORCE_100_FD 0x1001BC01 ++#define INIT_VALUE_OF_FORCE_1000_FD 0x1F01DC01 ++ ++// Define Whole FE Reset Register ++#define RSTCTRL (RALINK_SYSCTL_BASE + 0x34) ++ ++/*========================================= ++ PDMA RX Descriptor Format define ++=========================================*/ ++ ++//------------------------------------------------- ++typedef struct _PDMA_RXD_INFO1_ PDMA_RXD_INFO1_T; ++ ++struct _PDMA_RXD_INFO1_ ++{ ++ unsigned int PDP0; ++}; ++//------------------------------------------------- ++typedef struct _PDMA_RXD_INFO2_ PDMA_RXD_INFO2_T; ++ ++struct _PDMA_RXD_INFO2_ ++{ ++ unsigned int PLEN1 : 14; ++ unsigned int LS1 : 1; ++ unsigned int TAG : 1; ++ unsigned int PLEN0 : 14; ++ unsigned int LS0 : 1; ++ unsigned int DDONE_bit : 1; ++}; ++//------------------------------------------------- ++typedef struct _PDMA_RXD_INFO3_ PDMA_RXD_INFO3_T; ++ ++struct _PDMA_RXD_INFO3_ ++{ ++ unsigned int VID:16; ++ unsigned int TPID:16; ++}; ++//------------------------------------------------- ++typedef struct _PDMA_RXD_INFO4_ PDMA_RXD_INFO4_T; ++ ++struct _PDMA_RXD_INFO4_ ++{ ++#if defined (CONFIG_RALINK_MT7620) ++ unsigned int FOE_Entry : 14; ++ unsigned int CRSN : 5; ++ unsigned int SPORT : 3; ++ unsigned int L4F : 1; ++ unsigned int L4VLD : 1; ++ unsigned int TACK : 1; ++ unsigned int IP4F : 1; ++ unsigned int IP4 : 1; ++ unsigned int IP6 : 1; ++ unsigned int UN_USE1 : 4; ++#elif defined (CONFIG_RALINK_MT7621) ++ unsigned int FOE_Entry : 14; ++ unsigned int CRSN : 5; ++ unsigned int SP : 4; ++ unsigned int L4F : 1; ++ unsigned int L4VLD : 1; ++ unsigned int TACK : 1; ++ unsigned int IP4F : 1; ++ unsigned int IP4 : 1; ++ unsigned int IP6 : 1; ++ unsigned int UN_USE1 : 3; ++#else ++ unsigned int FOE_Entry : 14; ++ unsigned int FVLD : 1; ++ unsigned int UN_USE1 : 1; ++ unsigned int AI : 8; ++ unsigned int SP : 3; ++ unsigned int AIS : 1; ++ unsigned int L4F : 1; ++ unsigned int IPF : 1; ++ unsigned int L4FVLD_bit : 1; ++ unsigned int IPFVLD_bit : 1; ++#endif ++}; ++ ++ ++struct PDMA_rxdesc { ++ PDMA_RXD_INFO1_T rxd_info1; ++ PDMA_RXD_INFO2_T rxd_info2; ++ PDMA_RXD_INFO3_T rxd_info3; ++ PDMA_RXD_INFO4_T rxd_info4; ++#ifdef CONFIG_32B_DESC ++ unsigned int rxd_info5; ++ unsigned int rxd_info6; ++ unsigned int rxd_info7; ++ unsigned int rxd_info8; ++#endif ++}; ++ ++/*========================================= ++ PDMA TX Descriptor Format define ++=========================================*/ ++//------------------------------------------------- ++typedef struct _PDMA_TXD_INFO1_ PDMA_TXD_INFO1_T; ++ ++struct _PDMA_TXD_INFO1_ ++{ ++ unsigned int SDP0; ++}; ++//------------------------------------------------- ++typedef struct _PDMA_TXD_INFO2_ PDMA_TXD_INFO2_T; ++ ++struct _PDMA_TXD_INFO2_ ++{ ++ unsigned int SDL1 : 14; ++ unsigned int LS1_bit : 1; ++ unsigned int BURST_bit : 1; ++ unsigned int SDL0 : 14; ++ unsigned int LS0_bit : 1; ++ unsigned int DDONE_bit : 1; ++}; ++//------------------------------------------------- ++typedef struct _PDMA_TXD_INFO3_ PDMA_TXD_INFO3_T; ++ ++struct _PDMA_TXD_INFO3_ ++{ ++ unsigned int SDP1; ++}; ++//------------------------------------------------- ++typedef struct _PDMA_TXD_INFO4_ PDMA_TXD_INFO4_T; ++ ++struct _PDMA_TXD_INFO4_ ++{ ++#if defined (CONFIG_RALINK_MT7620) ++ unsigned int VPRI_VIDX : 8; ++ unsigned int SIDX : 4; ++ unsigned int INSP : 1; ++ unsigned int RESV : 2; ++ unsigned int UDF : 5; ++ unsigned int FP_BMAP : 8; ++ unsigned int TSO : 1; ++ unsigned int TUI_CO : 3; ++#elif defined (CONFIG_RALINK_MT7621) ++ unsigned int VLAN_TAG :17; // INSV(1)+VPRI(3)+CFI(1)+VID(12) ++ unsigned int RESV : 2; ++ unsigned int UDF : 6; ++ unsigned int FPORT : 3; ++ unsigned int TSO : 1; ++ unsigned int TUI_CO : 3; ++#else ++ unsigned int VPRI_VIDX : 8; ++ unsigned int SIDX : 4; ++ unsigned int INSP : 1; ++ unsigned int RESV : 1; ++ unsigned int UN_USE3 : 2; ++ unsigned int QN : 3; ++ unsigned int UN_USE2 : 1; ++ unsigned int UDF : 4; ++ unsigned int PN : 3; ++ unsigned int UN_USE1 : 1; ++ unsigned int TSO : 1; ++ unsigned int TUI_CO : 3; ++#endif ++}; ++ ++ ++struct PDMA_txdesc { ++ PDMA_TXD_INFO1_T txd_info1; ++ PDMA_TXD_INFO2_T txd_info2; ++ PDMA_TXD_INFO3_T txd_info3; ++ PDMA_TXD_INFO4_T txd_info4; ++#ifdef CONFIG_32B_DESC ++ unsigned int txd_info5; ++ unsigned int txd_info6; ++ unsigned int txd_info7; ++ unsigned int txd_info8; ++#endif ++}; ++ ++ ++#if defined (CONFIG_RALINK_MT7621) ++/*========================================= ++ QDMA TX Descriptor Format define ++=========================================*/ ++//------------------------------------------------- ++typedef struct _QDMA_TXD_INFO1_ QDMA_TXD_INFO1_T; ++ ++struct _QDMA_TXD_INFO1_ ++{ ++ unsigned int SDP; ++}; ++//------------------------------------------------- ++typedef struct _QDMA_TXD_INFO2_ QDMA_TXD_INFO2_T; ++ ++struct _QDMA_TXD_INFO2_ ++{ ++ unsigned int NDP; ++}; ++//------------------------------------------------- ++typedef struct _QDMA_TXD_INFO3_ QDMA_TXD_INFO3_T; ++ ++struct _QDMA_TXD_INFO3_ ++{ ++ unsigned int QID : 4; ++ unsigned int RESV : 10; ++ unsigned int SWC_bit : 1; ++ unsigned int BURST_bit : 1; ++ unsigned int SDL : 14; ++ unsigned int LS_bit : 1; ++ unsigned int OWN_bit : 1; ++}; ++//------------------------------------------------- ++typedef struct _QDMA_TXD_INFO4_ QDMA_TXD_INFO4_T; ++ ++struct _QDMA_TXD_INFO4_ ++{ ++ unsigned int VLAN_TAG :17; // INSV(1)+VPRI(3)+CFI(1)+VID(12) ++ unsigned int RESV : 2; ++ unsigned int UDF : 6; ++ unsigned int FPORT : 3; ++ unsigned int TSO : 1; ++ unsigned int TUI_CO : 3; ++}; ++ ++ ++struct QDMA_txdesc { ++ QDMA_TXD_INFO1_T txd_info1; ++ QDMA_TXD_INFO2_T txd_info2; ++ QDMA_TXD_INFO3_T txd_info3; ++ QDMA_TXD_INFO4_T txd_info4; ++#ifdef CONFIG_32B_DESC ++ unsigned int txd_info5; ++ unsigned int txd_info6; ++ unsigned int txd_info7; ++ unsigned int txd_info8; ++#endif ++}; ++#endif ++ ++#define phys_to_bus(a) (a & 0x1FFFFFFF) ++ ++#define PHY_Enable_Auto_Nego 0x1000 ++#define PHY_Restart_Auto_Nego 0x0200 ++ ++/* PHY_STAT_REG = 1; */ ++#define PHY_Auto_Neco_Comp 0x0020 ++#define PHY_Link_Status 0x0004 ++ ++/* PHY_AUTO_NEGO_REG = 4; */ ++#define PHY_Cap_10_Half 0x0020 ++#define PHY_Cap_10_Full 0x0040 ++#define PHY_Cap_100_Half 0x0080 ++#define PHY_Cap_100_Full 0x0100 ++ ++/* proc definition */ ++ ++#if !defined (CONFIG_RALINK_RT6855) && !defined(CONFIG_RALINK_RT6855A) && \ ++ !defined (CONFIG_RALINK_MT7620) && !defined (CONFIG_RALINK_MT7621) ++#define CDMA_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x4c) ++#define GDMA1_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x50) ++#define PPE_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x54) ++#define PSE_IQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x58) ++#endif ++ ++#define PROCREG_CONTROL_FILE "/var/run/procreg_control" ++#if defined (CONFIG_RALINK_RT2880) ++#define PROCREG_DIR "rt2880" ++#elif defined (CONFIG_RALINK_RT3052) ++#define PROCREG_DIR "rt3052" ++#elif defined (CONFIG_RALINK_RT3352) ++#define PROCREG_DIR "rt3352" ++#elif defined (CONFIG_RALINK_RT5350) ++#define PROCREG_DIR "rt5350" ++#elif defined (CONFIG_RALINK_RT2883) ++#define PROCREG_DIR "rt2883" ++#elif defined (CONFIG_RALINK_RT3883) ++#define PROCREG_DIR "rt3883" ++#elif defined (CONFIG_RALINK_RT6855) ++#define PROCREG_DIR "rt6855" ++#elif defined (CONFIG_RALINK_MT7620) ++#define PROCREG_DIR "mt7620" ++#elif defined (CONFIG_RALINK_MT7621) ++#define PROCREG_DIR "mt7621" ++#elif defined (CONFIG_RALINK_MT7628) ++#define PROCREG_DIR "mt7628" ++#elif defined (CONFIG_RALINK_RT6855A) ++#define PROCREG_DIR "rt6855a" ++#else ++#define PROCREG_DIR "rt2880" ++#endif ++#define PROCREG_SKBFREE "skb_free" ++#define PROCREG_TXRING "tx_ring" ++#define PROCREG_RXRING "rx_ring" ++#define PROCREG_NUM_OF_TXD "num_of_txd" ++#define PROCREG_TSO_LEN "tso_len" ++#define PROCREG_LRO_STATS "lro_stats" ++#define PROCREG_GMAC "gmac" ++#define PROCREG_GMAC2 "gmac2" ++#define PROCREG_CP0 "cp0" ++#define PROCREG_RAQOS "qos" ++#define PROCREG_READ_VAL "regread_value" ++#define PROCREG_WRITE_VAL "regwrite_value" ++#define PROCREG_ADDR "reg_addr" ++#define PROCREG_CTL "procreg_control" ++#define PROCREG_RXDONE_INTR "rxdone_intr_count" ++#define PROCREG_ESW_INTR "esw_intr_count" ++#define PROCREG_ESW_CNT "esw_cnt" ++#define PROCREG_SNMP "snmp" ++#if defined (TASKLET_WORKQUEUE_SW) ++#define PROCREG_SCHE "schedule" ++#endif ++#define PROCREG_QDMA "qdma" ++ ++struct rt2880_reg_op_data { ++ char name[64]; ++ unsigned int reg_addr; ++ unsigned int op; ++ unsigned int reg_value; ++}; ++ ++#ifdef CONFIG_RAETH_LRO ++struct lro_counters { ++ u32 lro_aggregated; ++ u32 lro_flushed; ++ u32 lro_no_desc; ++}; ++ ++struct lro_para_struct { ++ unsigned int lan_ip1; ++}; ++ ++#endif // CONFIG_RAETH_LRO // ++ ++ ++ ++ ++typedef struct end_device ++{ ++ ++ unsigned int tx_cpu_owner_idx0; ++ unsigned int rx_cpu_owner_idx0; ++ unsigned int fe_int_status; ++ unsigned int tx_full; ++ ++#if !defined (CONFIG_RAETH_QDMA) ++ unsigned int phy_tx_ring0; ++#else ++ /* QDMA Tx PTR */ ++ struct sk_buff *free_skb[NUM_TX_DESC]; ++ unsigned int tx_dma_ptr; ++ unsigned int tx_cpu_ptr; ++ unsigned int free_txd_num; ++ unsigned int free_txd_head; ++ unsigned int free_txd_tail; ++ struct QDMA_txdesc *txd_pool; ++ dma_addr_t phy_txd_pool; ++// unsigned int phy_txd_pool; ++ unsigned int txd_pool_info[NUM_TX_DESC]; ++#endif ++ ++ unsigned int phy_rx_ring0, phy_rx_ring1; ++ ++#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || \ ++ defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || \ ++ defined(CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7620) || \ ++ defined(CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628) ++ //send signal to user application to notify link status changed ++ struct work_struct kill_sig_wq; ++#endif ++ ++ struct work_struct reset_task; ++#ifdef WORKQUEUE_BH ++ struct work_struct rx_wq; ++#else ++#if defined (TASKLET_WORKQUEUE_SW) ++ struct work_struct rx_wq; ++#endif ++#endif // WORKQUEUE_BH // ++ ++#if defined(CONFIG_RAETH_QOS) ++ struct sk_buff * skb_free[NUM_TX_RINGS][NUM_TX_DESC]; ++ unsigned int free_idx[NUM_TX_RINGS]; ++#else ++ struct sk_buff* skb_free[NUM_TX_DESC]; ++ unsigned int free_idx; ++#endif ++ ++ struct net_device_stats stat; /* The new statistics table. */ ++ spinlock_t page_lock; /* Page register locks */ ++ struct PDMA_txdesc *tx_ring0; ++#if defined(CONFIG_RAETH_QOS) ++ struct PDMA_txdesc *tx_ring1; ++ struct PDMA_txdesc *tx_ring2; ++ struct PDMA_txdesc *tx_ring3; ++#endif ++ struct PDMA_rxdesc *rx_ring0; ++ struct sk_buff *netrx0_skbuf[NUM_RX_DESC]; ++#if defined (CONFIG_RAETH_MULTIPLE_RX_RING) ++ struct PDMA_rxdesc *rx_ring1; ++ struct sk_buff *netrx1_skbuf[NUM_RX_DESC]; ++#endif ++#ifdef CONFIG_RAETH_NAPI ++ atomic_t irq_sem; ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35) ++ struct napi_struct napi; ++#endif ++#endif ++#ifdef CONFIG_PSEUDO_SUPPORT ++ struct net_device *PseudoDev; ++ unsigned int isPseudo; ++#endif ++#if defined (CONFIG_ETHTOOL) /*&& defined (CONFIG_RAETH_ROUTER)*/ ++ struct mii_if_info mii_info; ++#endif ++#ifdef CONFIG_RAETH_LRO ++ struct lro_counters lro_counters; ++ struct net_lro_mgr lro_mgr; ++ struct net_lro_desc lro_arr[8]; ++#endif ++#ifdef CONFIG_RAETH_HW_VLAN_RX ++ struct vlan_group *vlgrp; ++#endif ++} END_DEVICE, *pEND_DEVICE; ++ ++ ++#define RAETH_VERSION "v3.0" ++ ++#endif ++ ++#ifdef CONFIG_RAETH_QDMA ++#define DMA_GLO_CFG QDMA_GLO_CFG ++#define GDMA1_FWD_PORT 0x5555 ++#define GDMA2_FWD_PORT 0x5555 ++#define RAETH_RX_CALC_IDX0 QRX_CRX_IDX_0 ++#define RAETH_RX_CALC_IDX1 QRX_CRX_IDX_1 ++#define RAETH_FE_INT_STATUS QFE_INT_STATUS ++#define RAETH_FE_INT_ALL QFE_INT_ALL ++#define RAETH_FE_INT_ENABLE QFE_INT_ENABLE ++#define RAETH_FE_INT_DLY_INIT QFE_INT_DLY_INIT ++#define RAETH_FE_INT_SETTING RX_DONE_INT0 | RX_DONE_INT1 | RLS_DONE_INT ++#define RAETH_TX_DLY_INT RLS_DLY_INT ++#define RAETH_TX_DONE_INT0 RLS_DONE_INT ++#define RAETH_DLY_INT_CFG QDMA_DELAY_INT ++#else ++#define DMA_GLO_CFG PDMA_GLO_CFG ++#define GDMA1_FWD_PORT 0x0000 ++#define GDMA2_FWD_PORT 0x0000 ++#define RAETH_RX_CALC_IDX0 RX_CALC_IDX0 ++#define RAETH_RX_CALC_IDX1 RX_CALC_IDX1 ++#define RAETH_FE_INT_STATUS FE_INT_STATUS ++#define RAETH_FE_INT_ALL FE_INT_ALL ++#define RAETH_FE_INT_ENABLE FE_INT_ENABLE ++#define RAETH_FE_INT_DLY_INIT FE_INT_DLY_INIT ++#define RAETH_FE_INT_SETTING RX_DONE_INT0 | RX_DONE_INT1 | TX_DONE_INT0 | TX_DONE_INT1 | TX_DONE_INT2 | TX_DONE_INT3 ++#define RAETH_TX_DLY_INT TX_DLY_INT ++#define RAETH_TX_DONE_INT0 TX_DONE_INT0 ++#define RAETH_DLY_INT_CFG DLY_INT_CFG ++#endif +diff --git a/drivers/net/ethernet/raeth/ra_ioctl.h b/drivers/net/ethernet/raeth/ra_ioctl.h +new file mode 100644 +index 0000000..eac0964 +--- /dev/null ++++ b/drivers/net/ethernet/raeth/ra_ioctl.h +@@ -0,0 +1,92 @@ ++#ifndef _RAETH_IOCTL_H ++#define _RAETH_IOCTL_H ++ ++/* ioctl commands */ ++#define RAETH_ESW_REG_READ 0x89F1 ++#define RAETH_ESW_REG_WRITE 0x89F2 ++#define RAETH_MII_READ 0x89F3 ++#define RAETH_MII_WRITE 0x89F4 ++#define RAETH_ESW_INGRESS_RATE 0x89F5 ++#define RAETH_ESW_EGRESS_RATE 0x89F6 ++#define RAETH_ESW_PHY_DUMP 0x89F7 ++#define RAETH_QDMA_REG_READ 0x89F8 ++#define RAETH_QDMA_REG_WRITE 0x89F9 ++#define RAETH_QDMA_QUEUE_MAPPING 0x89FA ++#define RAETH_QDMA_READ_CPU_CLK 0x89FB ++ ++#if defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7621) ++ ++#define REG_ESW_WT_MAC_MFC 0x10 ++#define REG_ESW_WT_MAC_ATA1 0x74 ++#define REG_ESW_WT_MAC_ATA2 0x78 ++#define REG_ESW_WT_MAC_ATWD 0x7C ++#define REG_ESW_WT_MAC_ATC 0x80 ++ ++#define REG_ESW_TABLE_TSRA1 0x84 ++#define REG_ESW_TABLE_TSRA2 0x88 ++#define REG_ESW_TABLE_ATRD 0x8C ++ ++ ++#define REG_ESW_VLAN_VTCR 0x90 ++#define REG_ESW_VLAN_VAWD1 0x94 ++#define REG_ESW_VLAN_VAWD2 0x98 ++ ++ ++#define REG_ESW_VLAN_ID_BASE 0x100 ++ ++//#define REG_ESW_VLAN_ID_BASE 0x50 ++#define REG_ESW_VLAN_MEMB_BASE 0x70 ++#define REG_ESW_TABLE_SEARCH 0x24 ++#define REG_ESW_TABLE_STATUS0 0x28 ++#define REG_ESW_TABLE_STATUS1 0x2C ++#define REG_ESW_TABLE_STATUS2 0x30 ++#define REG_ESW_WT_MAC_AD0 0x34 ++#define REG_ESW_WT_MAC_AD1 0x38 ++#define REG_ESW_WT_MAC_AD2 0x3C ++ ++#else ++/* rt3052 embedded ethernet switch registers */ ++#define REG_ESW_VLAN_ID_BASE 0x50 ++#define REG_ESW_VLAN_MEMB_BASE 0x70 ++#define REG_ESW_TABLE_SEARCH 0x24 ++#define REG_ESW_TABLE_STATUS0 0x28 ++#define REG_ESW_TABLE_STATUS1 0x2C ++#define REG_ESW_TABLE_STATUS2 0x30 ++#define REG_ESW_WT_MAC_AD0 0x34 ++#define REG_ESW_WT_MAC_AD1 0x38 ++#define REG_ESW_WT_MAC_AD2 0x3C ++#endif ++ ++ ++#if defined(CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628) ++#define REG_ESW_MAX 0x16C ++#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) ++#define REG_ESW_MAX 0x7FFFF ++#else //RT305x, RT3350 ++#define REG_ESW_MAX 0xFC ++#endif ++#define REG_HQOS_MAX 0x3FFF ++ ++ ++typedef struct rt3052_esw_reg { ++ unsigned int off; ++ unsigned int val; ++} esw_reg; ++ ++typedef struct ralink_mii_ioctl_data { ++ __u32 phy_id; ++ __u32 reg_num; ++ __u32 val_in; ++ __u32 val_out; ++} ra_mii_ioctl_data; ++ ++typedef struct rt335x_esw_reg { ++ unsigned int on_off; ++ unsigned int port; ++ unsigned int bw;/*Mbps*/ ++} esw_rate; ++ ++ ++#endif +diff --git a/drivers/net/ethernet/raeth/ra_mac.c b/drivers/net/ethernet/raeth/ra_mac.c +new file mode 100644 +index 0000000..8e07a06 +--- /dev/null ++++ b/drivers/net/ethernet/raeth/ra_mac.c +@@ -0,0 +1,98 @@ ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/types.h> ++#include <linux/fcntl.h> ++#include <linux/interrupt.h> ++#include <linux/ptrace.h> ++#include <linux/ioport.h> ++#include <linux/in.h> ++#include <linux/slab.h> ++#include <linux/string.h> ++#include <linux/signal.h> ++#include <linux/irq.h> ++#include <linux/ctype.h> ++ ++#include <asm/io.h> ++#include <asm/bitops.h> ++#include <asm/io.h> ++#include <asm/dma.h> ++ ++#include <asm/rt2880/surfboardint.h> /* for cp0 reg access, added by bobtseng */ ++ ++#include <linux/errno.h> ++#include <linux/init.h> ++//#include <linux/mca.h> ++ ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/skbuff.h> ++ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/proc_fs.h> ++#include <asm/uaccess.h> ++ ++#if defined(CONFIG_USER_SNMPD) ++#include <linux/seq_file.h> ++#endif ++ ++ ++ ++#include "ra2882ethreg.h" ++#include "raether.h" ++#include "ra_mac.h" ++ ++extern struct net_device *dev_raether; ++ ++ ++void ra2880stop(END_DEVICE *ei_local) ++{ ++ unsigned int regValue; ++ printk("ra2880stop()..."); ++ ++ regValue = sysRegRead(PDMA_GLO_CFG); ++ regValue &= ~(TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN); ++ sysRegWrite(PDMA_GLO_CFG, regValue); ++ printk("-> %s 0x%08x 0x%08x\n", "PDMA_GLO_CFG", PDMA_GLO_CFG, regValue); ++ printk("Done\n"); ++} ++ ++void ei_irq_clear(void) ++{ ++ sysRegWrite(FE_INT_STATUS, 0xFFFFFFFF); ++ printk("-> %s 0x%08x 0x%08x\n", "FE_INT_STATUS", FE_INT_STATUS, 0xFFFFFFFF); ++} ++ ++void rt2880_gmac_hard_reset(void) ++{ ++ sysRegWrite(RSTCTRL, RALINK_FE_RST); ++ printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, RALINK_FE_RST); ++ sysRegWrite(RSTCTRL, 0); ++ printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, 0); ++} ++ ++void ra2880EnableInterrupt() ++{ ++ unsigned int regValue = sysRegRead(FE_INT_ENABLE); ++ sysRegWrite(FE_INT_ENABLE, regValue); ++ printk("-> %s 0x%08x 0x%08x\n", "FE_INT_ENABLE", FE_INT_ENABLE, regValue); ++} ++ ++void ra2880MacAddressSet(unsigned char p[6]) ++{ ++ unsigned long regValue; ++ ++ regValue = (p[0] << 8) | (p[1]); ++ sysRegWrite(GDMA1_MAC_ADRH, regValue); ++ printk("-> %s 0x%08x 0x%08x\n", "GDMA1_MAC_ADRH", GDMA1_MAC_ADRH, regValue); ++ ++ regValue = (p[2] << 24) | (p[3] <<16) | (p[4] << 8) | p[5]; ++ printk("-> %s 0x%08x 0x%08x\n", "GDMA1_MAC_ADRL", GDMA1_MAC_ADRL, regValue); ++ sysRegWrite(GDMA1_MAC_ADRL, regValue); ++ ++ return; ++} ++ ++ +diff --git a/drivers/net/ethernet/raeth/ra_mac.h b/drivers/net/ethernet/raeth/ra_mac.h +new file mode 100644 +index 0000000..4f4e6ae +--- /dev/null ++++ b/drivers/net/ethernet/raeth/ra_mac.h +@@ -0,0 +1,35 @@ ++#ifndef RA_MAC_H ++#define RA_MAC_H ++ ++void ra2880stop(END_DEVICE *ei_local); ++void ra2880MacAddressSet(unsigned char p[6]); ++void ra2880Mac2AddressSet(unsigned char p[6]); ++void ethtool_init(struct net_device *dev); ++ ++void ra2880EnableInterrupt(void); ++ ++void dump_qos(void); ++void dump_reg(void); ++void dump_cp0(void); ++ ++int debug_proc_init(void); ++void debug_proc_exit(void); ++ ++#if defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7621) ++void enable_auto_negotiate(int unused); ++#else ++void enable_auto_negotiate(int ge); ++#endif ++ ++void rt2880_gmac_hard_reset(void); ++ ++int TsoLenUpdate(int tso_len); ++int NumOfTxdUpdate(int num_of_txd); ++ ++#ifdef CONFIG_RAETH_LRO ++int LroStatsUpdate(struct net_lro_mgr *lro_mgr, bool all_flushed); ++#endif ++int getnext(const char *src, int separator, char *dest); ++int str_to_ip(unsigned int *ip, const char *str); ++#endif +diff --git a/drivers/net/ethernet/raeth/raether.c b/drivers/net/ethernet/raeth/raether.c +new file mode 100644 +index 0000000..b6cbc40 +--- /dev/null ++++ b/drivers/net/ethernet/raeth/raether.c +@@ -0,0 +1,693 @@ ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/interrupt.h> ++#include <linux/init.h> ++#include <linux/skbuff.h> ++#include <linux/if_vlan.h> ++#include <linux/if_ether.h> ++#include <linux/fs.h> ++#include <asm/uaccess.h> ++#include <linux/delay.h> ++#include <linux/sched.h> ++ ++#include <asm/rt2880/rt_mmap.h> ++#include "ra2882ethreg.h" ++#include "raether.h" ++#include "ra_mac.h" ++#include "ra_ioctl.h" ++ ++static int rt2880_eth_recv(struct net_device* dev); ++int reg_dbg = 0; ++ ++void setup_internal_gsw(void); ++ ++#define MAX_RX_LENGTH 1536 ++ ++struct net_device *dev_raether; ++ ++static int rx_dma_owner_idx; ++static int rx_dma_owner_idx0; ++static int pending_recv; ++static struct PDMA_rxdesc *rx_ring; ++static unsigned long tx_ring_full=0; ++ ++#define KSEG1 0xa0000000 ++#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1)) ++#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1) ++ ++extern int fe_dma_init(struct net_device *dev); ++extern int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no); ++extern void ei_xmit_housekeeping(unsigned long unused); ++extern inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no); ++ ++static int ei_set_mac_addr(struct net_device *dev, void *p) ++{ ++ struct sockaddr *addr = p; ++ ++ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); ++ ++ if(netif_running(dev)) ++ return -EBUSY; ++ ++ ra2880MacAddressSet(addr->sa_data); ++ return 0; ++} ++ ++ ++void set_fe_dma_glo_cfg(void) ++{ ++ int dma_glo_cfg=0; ++ ++ dma_glo_cfg = (TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN | PDMA_BT_SIZE_16DWORDS); ++ ++ dma_glo_cfg |= (RX_2B_OFFSET); ++ ++ sysRegWrite(DMA_GLO_CFG, dma_glo_cfg); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "DMA_GLO_CFG", DMA_GLO_CFG, dma_glo_cfg); ++} ++ ++int forward_config(struct net_device *dev) ++{ ++ unsigned int regVal, regCsg; ++ ++ regVal = sysRegRead(GDMA1_FWD_CFG); ++ regCsg = sysRegRead(CDMA_CSG_CFG); ++ ++ //set unicast/multicast/broadcast frame to cpu ++ regVal &= ~0xFFFF; ++ regVal |= GDMA1_FWD_PORT; ++ regCsg &= ~0x7; ++ ++ //disable ipv4 header checksum check ++ regVal &= ~GDM1_ICS_EN; ++ regCsg &= ~ICS_GEN_EN; ++ ++ //disable tcp checksum check ++ regVal &= ~GDM1_TCS_EN; ++ regCsg &= ~TCS_GEN_EN; ++ ++ //disable udp checksum check ++ regVal &= ~GDM1_UCS_EN; ++ regCsg &= ~UCS_GEN_EN; ++ ++ ++ dev->features &= ~NETIF_F_IP_CSUM; /* disable checksum TCP/UDP over IPv4 */ ++ ++ ++ sysRegWrite(GDMA1_FWD_CFG, regVal); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "GDMA1_FWD_CFG", GDMA1_FWD_CFG, regVal); ++ sysRegWrite(CDMA_CSG_CFG, regCsg); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "CDMA_CSG_CFG", CDMA_CSG_CFG, regCsg); ++ ++ regVal = 0x1; ++ sysRegWrite(FE_RST_GL, regVal); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "FE_RST_GL", FE_RST_GL, regVal); ++ sysRegWrite(FE_RST_GL, 0); // update for RSTCTL issue ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "FE_RST_GL", FE_RST_GL, 1); ++ ++ regCsg = sysRegRead(CDMA_CSG_CFG); ++ printk("CDMA_CSG_CFG = %0X\n",regCsg); ++ regVal = sysRegRead(GDMA1_FWD_CFG); ++ printk("GDMA1_FWD_CFG = %0X\n",regVal); ++ ++ return 1; ++} ++ ++ ++static int rt2880_eth_recv(struct net_device* dev) ++{ ++ struct sk_buff *skb, *rx_skb; ++ unsigned int length = 0; ++ unsigned long RxProcessed; ++ ++ ++ int bReschedule = 0; ++ END_DEVICE* ei_local = netdev_priv(dev); ++ ++ ++ ++ RxProcessed = 0; ++ ++ rx_dma_owner_idx0 = (sysRegRead(RAETH_RX_CALC_IDX0) + 1) % NUM_RX_DESC; ++ ++ for ( ; ; ) { ++ ++ if (RxProcessed++ > NUM_RX_MAX_PROCESS) ++ { ++ // need to reschedule rx handle ++ bReschedule = 1; ++ break; ++ } ++ ++ ++ ++ if (ei_local->rx_ring0[rx_dma_owner_idx0].rxd_info2.DDONE_bit == 1) { ++ rx_ring = ei_local->rx_ring0; ++ rx_dma_owner_idx = rx_dma_owner_idx0; ++ } else { ++ break; ++ } ++ ++ /* skb processing */ ++ length = rx_ring[rx_dma_owner_idx].rxd_info2.PLEN0; ++ rx_skb = ei_local->netrx0_skbuf[rx_dma_owner_idx]; ++ rx_skb->data = ei_local->netrx0_skbuf[rx_dma_owner_idx]->data; ++ rx_skb->len = length; ++ ++ rx_skb->data += NET_IP_ALIGN; ++ ++ rx_skb->tail = rx_skb->data + length; ++ ++ rx_skb->dev = dev; ++ rx_skb->protocol = eth_type_trans(rx_skb,dev); ++ ++ rx_skb->ip_summed = CHECKSUM_NONE; ++ ++ ++ /* We have to check the free memory size is big enough ++ * before pass the packet to cpu*/ ++ skb = __dev_alloc_skb(MAX_RX_LENGTH + NET_IP_ALIGN, GFP_ATOMIC); ++ ++ if (unlikely(skb == NULL)) ++ { ++ printk(KERN_ERR "skb not available...\n"); ++ ei_local->stat.rx_dropped++; ++ bReschedule = 1; ++ break; ++ } ++ ++ { ++ netif_rx(rx_skb); ++ } ++ ++ { ++ ei_local->stat.rx_packets++; ++ ei_local->stat.rx_bytes += length; ++ } ++ ++ ++ rx_ring[rx_dma_owner_idx].rxd_info2.PLEN0 = MAX_RX_LENGTH; ++ rx_ring[rx_dma_owner_idx].rxd_info2.LS0 = 0; ++ rx_ring[rx_dma_owner_idx].rxd_info2.DDONE_bit = 0; ++ rx_ring[rx_dma_owner_idx].rxd_info1.PDP0 = dma_map_single(NULL, skb->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE); ++ ++ /* Move point to next RXD which wants to alloc*/ ++ sysRegWrite(RAETH_RX_CALC_IDX0, rx_dma_owner_idx); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RAETH_RX_CALC_IDX0", RAETH_RX_CALC_IDX0, rx_dma_owner_idx); ++ ei_local->netrx0_skbuf[rx_dma_owner_idx] = skb; ++ ++ /* Update to Next packet point that was received. ++ */ ++ rx_dma_owner_idx0 = (sysRegRead(RAETH_RX_CALC_IDX0) + 1) % NUM_RX_DESC; ++ } /* for */ ++ ++ return bReschedule; ++} ++ ++void ei_receive_workq(struct work_struct *work) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ unsigned long reg_int_mask=0; ++ int bReschedule=0; ++ ++ ++ if(tx_ring_full==0){ ++ bReschedule = rt2880_eth_recv(dev); ++ if(bReschedule) ++ { ++ schedule_work(&ei_local->rx_wq); ++ }else{ ++ reg_int_mask=sysRegRead(RAETH_FE_INT_ENABLE); ++ sysRegWrite(RAETH_FE_INT_ENABLE, reg_int_mask| RX_DLY_INT); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, reg_int_mask| RX_DLY_INT); ++ } ++ }else{ ++ schedule_work(&ei_local->rx_wq); ++ } ++} ++ ++ ++static irqreturn_t ei_interrupt(int irq, void *dev_id) ++{ ++ unsigned long reg_int_val; ++ unsigned long reg_int_mask=0; ++ unsigned int recv = 0; ++ unsigned int transmit __maybe_unused = 0; ++ unsigned long flags; ++ ++ struct net_device *dev = (struct net_device *) dev_id; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ ++ if (dev == NULL) ++ { ++ printk (KERN_ERR "net_interrupt(): irq %x for unknown device.\n", IRQ_ENET0); ++ return IRQ_NONE; ++ } ++ ++ ++ spin_lock_irqsave(&(ei_local->page_lock), flags); ++ reg_int_val = sysRegRead(RAETH_FE_INT_STATUS); ++ ++ if((reg_int_val & RX_DLY_INT)) ++ recv = 1; ++ ++ if (reg_int_val & RAETH_TX_DLY_INT) ++ transmit = 1; ++ ++ sysRegWrite(RAETH_FE_INT_STATUS, RAETH_FE_INT_DLY_INIT); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_STATUS", RAETH_FE_INT_STATUS, RAETH_FE_INT_DLY_INIT); ++ ++ ei_xmit_housekeeping(0); ++ ++ if (((recv == 1) || (pending_recv ==1)) && (tx_ring_full==0)) ++ { ++ reg_int_mask = sysRegRead(RAETH_FE_INT_ENABLE); ++ sysRegWrite(RAETH_FE_INT_ENABLE, reg_int_mask & ~(RX_DLY_INT)); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, reg_int_mask & ~(RX_DLY_INT)); ++ pending_recv=0; ++ schedule_work(&ei_local->rx_wq); ++ } ++ else if (recv == 1 && tx_ring_full==1) ++ { ++ pending_recv=1; ++ } ++ spin_unlock_irqrestore(&(ei_local->page_lock), flags); ++ ++ return IRQ_HANDLED; ++} ++ ++static void esw_link_status_changed(int port_no, void *dev_id) ++{ ++ unsigned int reg_val; ++ mii_mgr_read(31, (0x3008 + (port_no*0x100)), ®_val); ++ if(reg_val & 0x1) { ++ printk("ESW: Link Status Changed - Port%d Link UP\n", port_no); ++ } else { ++ printk("ESW: Link Status Changed - Port%d Link Down\n", port_no); ++ } ++} ++ ++ ++static irqreturn_t esw_interrupt(int irq, void *dev_id) ++{ ++ unsigned long flags; ++ unsigned int reg_int_val; ++ struct net_device *dev = (struct net_device *) dev_id; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ ++ spin_lock_irqsave(&(ei_local->page_lock), flags); ++ mii_mgr_read(31, 0x700c, ®_int_val); ++ ++ if (reg_int_val & P4_LINK_CH) { ++ esw_link_status_changed(4, dev_id); ++ } ++ ++ if (reg_int_val & P3_LINK_CH) { ++ esw_link_status_changed(3, dev_id); ++ } ++ if (reg_int_val & P2_LINK_CH) { ++ esw_link_status_changed(2, dev_id); ++ } ++ if (reg_int_val & P1_LINK_CH) { ++ esw_link_status_changed(1, dev_id); ++ } ++ if (reg_int_val & P0_LINK_CH) { ++ esw_link_status_changed(0, dev_id); ++ } ++ ++ mii_mgr_write(31, 0x700c, 0x1f); //ack switch link change ++ spin_unlock_irqrestore(&(ei_local->page_lock), flags); ++ return IRQ_HANDLED; ++} ++ ++ ++ ++static int ei_start_xmit_fake(struct sk_buff* skb, struct net_device *dev) ++{ ++ return ei_start_xmit(skb, dev, 1); ++} ++ ++static int ei_change_mtu(struct net_device *dev, int new_mtu) ++{ ++ unsigned long flags; ++ END_DEVICE *ei_local = netdev_priv(dev); // get priv ei_local pointer from net_dev structure ++ ++ if ( ei_local == NULL ) { ++ printk(KERN_EMERG "%s: ei_change_mtu passed a non-existent private pointer from net_dev!\n", dev->name); ++ return -ENXIO; ++ } ++ ++ spin_lock_irqsave(&ei_local->page_lock, flags); ++ ++ if ( (new_mtu > 4096) || (new_mtu < 64)) { ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return -EINVAL; ++ } ++ ++ if ( new_mtu > 1500 ) { ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return -EINVAL; ++ } ++ ++ dev->mtu = new_mtu; ++ ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return 0; ++} ++ ++ ++static const struct net_device_ops ei_netdev_ops = { ++ .ndo_init = rather_probe, ++ .ndo_open = ei_open, ++ .ndo_stop = ei_close, ++ .ndo_start_xmit = ei_start_xmit_fake, ++ .ndo_set_mac_address = eth_mac_addr, ++ .ndo_change_mtu = ei_change_mtu, ++ .ndo_validate_addr = eth_validate_addr, ++}; ++ ++void ra2880_setup_dev_fptable(struct net_device *dev) ++{ ++ RAETH_PRINT(__FUNCTION__ "is called!\n"); ++ ++ dev->netdev_ops = &ei_netdev_ops; ++#define TX_TIMEOUT (5*HZ) ++ dev->watchdog_timeo = TX_TIMEOUT; ++ ++} ++ ++void fe_reset(void) ++{ ++ u32 val; ++ val = sysRegRead(RSTCTRL); ++ ++ val = val | RALINK_FE_RST; ++ sysRegWrite(RSTCTRL, val); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, val); ++ val = val & ~(RALINK_FE_RST); ++ sysRegWrite(RSTCTRL, val); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, val); ++} ++ ++void ei_reset_task(struct work_struct *work) ++{ ++ struct net_device *dev = dev_raether; ++ ++ ei_close(dev); ++ ei_open(dev); ++ ++ return; ++} ++ ++void ei_tx_timeout(struct net_device *dev) ++{ ++ END_DEVICE *ei_local = netdev_priv(dev); ++ ++ schedule_work(&ei_local->reset_task); ++} ++ ++int __init rather_probe(struct net_device *dev) ++{ ++ END_DEVICE *ei_local = netdev_priv(dev); ++ struct sockaddr addr; ++ unsigned char mac_addr01234[5] = {0x00, 0x0C, 0x43, 0x28, 0x80}; ++ ++ fe_reset(); ++ net_srandom(jiffies); ++ memcpy(addr.sa_data, mac_addr01234, 5); ++ addr.sa_data[5] = net_random()&0xFF; ++ ei_set_mac_addr(dev, &addr); ++ spin_lock_init(&ei_local->page_lock); ++ ether_setup(dev); ++ ++ return 0; ++} ++ ++ ++int ei_open(struct net_device *dev) ++{ ++ int i, err; ++ unsigned long flags; ++ END_DEVICE *ei_local; ++ ++ ++ if (!try_module_get(THIS_MODULE)) ++ { ++ printk("%s: Cannot reserve module\n", __FUNCTION__); ++ return -1; ++ } ++ printk("Raeth %s (",RAETH_VERSION); ++ printk("Workqueue"); ++ ++ printk(")\n"); ++ ei_local = netdev_priv(dev); // get device pointer from System ++ // unsigned int flags; ++ ++ if (ei_local == NULL) ++ { ++ printk(KERN_EMERG "%s: ei_open passed a non-existent device!\n", dev->name); ++ return -ENXIO; ++ } ++ ++ /* receiving packet buffer allocation - NUM_RX_DESC x MAX_RX_LENGTH */ ++ for ( i = 0; i < NUM_RX_DESC; i++) ++ { ++ ei_local->netrx0_skbuf[i] = dev_alloc_skb(MAX_RX_LENGTH + NET_IP_ALIGN); ++ if (ei_local->netrx0_skbuf[i] == NULL ) { ++ printk("rx skbuff buffer allocation failed!"); ++ } else { ++ } ++ } ++ ++ spin_lock_irqsave(&(ei_local->page_lock), flags); ++ fe_dma_init(dev); ++ fe_sw_init(); //initialize fe and switch register ++ err = request_irq( dev->irq, ei_interrupt, 0, dev->name, dev); // try to fix irq in open ++ if (err) ++ return err; ++ ++ if ( dev->dev_addr != NULL) { ++ ra2880MacAddressSet((void *)(dev->dev_addr)); ++ } else { ++ printk("dev->dev_addr is empty !\n"); ++ } ++ mii_mgr_write(31, 0x7008, 0x1f); //enable switch link change intr ++ err = request_irq(31, esw_interrupt, IRQF_DISABLED, "Ralink_ESW", dev); ++ if (err) ++ return err; ++ ++ sysRegWrite(RAETH_DLY_INT_CFG, DELAY_INT_INIT); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RAETH_DLY_INT_CFG", RAETH_DLY_INT_CFG, DELAY_INT_INIT); ++ sysRegWrite(RAETH_FE_INT_ENABLE, RAETH_FE_INT_DLY_INIT); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, RAETH_FE_INT_DLY_INIT); ++ ++ INIT_WORK(&ei_local->reset_task, ei_reset_task); ++ ++ INIT_WORK(&ei_local->rx_wq, ei_receive_workq); ++ ++ netif_start_queue(dev); ++ ++ ++ spin_unlock_irqrestore(&(ei_local->page_lock), flags); ++ ++ ++ forward_config(dev); ++ return 0; ++} ++ ++int ei_close(struct net_device *dev) ++{ ++ int i; ++ END_DEVICE *ei_local = netdev_priv(dev); // device pointer ++ unsigned long flags; ++ spin_lock_irqsave(&(ei_local->page_lock), flags); ++ ++ cancel_work_sync(&ei_local->reset_task); ++ netif_stop_queue(dev); ++ ra2880stop(ei_local); ++ msleep(10); ++ ++ cancel_work_sync(&ei_local->rx_wq); ++ free_irq(dev->irq, dev); ++ free_irq(31, dev); ++ for ( i = 0; i < NUM_RX_DESC; i++) ++ { ++ if (ei_local->netrx0_skbuf[i] != NULL) { ++ dev_kfree_skb(ei_local->netrx0_skbuf[i]); ++ ei_local->netrx0_skbuf[i] = NULL; ++ } ++ } ++ if (ei_local->tx_ring0 != NULL) { ++ pci_free_consistent(NULL, NUM_TX_DESC*sizeof(struct PDMA_txdesc), ei_local->tx_ring0, ei_local->phy_tx_ring0); ++ } ++ pci_free_consistent(NULL, NUM_RX_DESC*sizeof(struct PDMA_rxdesc), ei_local->rx_ring0, ei_local->phy_rx_ring0); ++ ++ printk("Free TX/RX Ring Memory!\n"); ++ ++// fe_reset(); ++ spin_unlock_irqrestore(&(ei_local->page_lock), flags); ++ ++ module_put(THIS_MODULE); ++ return 0; ++} ++ ++ ++void setup_internal_gsw(void) ++{ ++ u32 i; ++ u32 regValue; ++ ++ /* reduce RGMII2 PAD driving strength */ ++ *(volatile u_long *)(PAD_RGMII2_MDIO_CFG) &= ~(0x3 << 4); ++ ++ //RGMII1=Normal mode ++ *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60) &= ~(0x1 << 14); ++ ++ //GMAC1= RGMII mode ++ *(volatile u_long *)(SYSCFG1) &= ~(0x3 << 12); ++ ++ //enable MDIO to control MT7530 ++ regValue = le32_to_cpu(*(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60)); ++ regValue &= ~(0x3 << 12); ++ *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60) = regValue; ++ ++ for(i=0;i<=4;i++) ++ { ++ //turn off PHY ++ mii_mgr_read(i, 0x0 ,®Value); ++ regValue |= (0x1<<11); ++ mii_mgr_write(i, 0x0, regValue); ++ } ++ mii_mgr_write(31, 0x7000, 0x3); //reset switch ++ udelay(10); ++ ++ if(sysRegRead(0xbe00000c)==0x00030101) { ++ sysRegWrite(RALINK_ETH_SW_BASE+0x100, 0x2005e30b);//(GE1, Force 1000M/FD, FC ON) ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x100", RALINK_ETH_SW_BASE+0x100, 0x2005e30b); ++ mii_mgr_write(31, 0x3600, 0x5e30b); ++ } else { ++ sysRegWrite(RALINK_ETH_SW_BASE+0x100, 0x2005e33b);//(GE1, Force 1000M/FD, FC ON) ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x100", RALINK_ETH_SW_BASE+0x100, 0x2005e33b); ++ mii_mgr_write(31, 0x3600, 0x5e33b); ++ } ++ ++ sysRegWrite(RALINK_ETH_SW_BASE+0x200, 0x00008000);//(GE2, Link down) ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x200", RALINK_ETH_SW_BASE+0x200, 0x00008000); ++ ++ //regValue = 0x117ccf; //Enable Port 6, P5 as GMAC5, P5 disable*/ ++ mii_mgr_read(31, 0x7804 ,®Value); ++ regValue &= ~(1<<8); //Enable Port 6 ++ regValue |= (1<<6); //Disable Port 5 ++ regValue |= (1<<13); //Port 5 as GMAC, no Internal PHY ++ ++ regValue |= (1<<16);//change HW-TRAP ++ printk("change HW-TRAP to 0x%x!!!!!!!!!!!!",regValue); ++ mii_mgr_write(31, 0x7804 ,regValue); ++ regValue = *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x10); ++ regValue = (regValue >> 6) & 0x7; ++ if(regValue >= 6) { //25Mhz Xtal ++ /* do nothing */ ++ } else if(regValue >=3) { //40Mhz ++ ++ mii_mgr_write(0, 13, 0x1f); // disable MT7530 core clock ++ mii_mgr_write(0, 14, 0x410); ++ mii_mgr_write(0, 13, 0x401f); ++ mii_mgr_write(0, 14, 0x0); ++ ++ mii_mgr_write(0, 13, 0x1f); // disable MT7530 PLL ++ mii_mgr_write(0, 14, 0x40d); ++ mii_mgr_write(0, 13, 0x401f); ++ mii_mgr_write(0, 14, 0x2020); ++ ++ mii_mgr_write(0, 13, 0x1f); // for MT7530 core clock = 500Mhz ++ mii_mgr_write(0, 14, 0x40e); ++ mii_mgr_write(0, 13, 0x401f); ++ mii_mgr_write(0, 14, 0x119); ++ ++ mii_mgr_write(0, 13, 0x1f); // enable MT7530 PLL ++ mii_mgr_write(0, 14, 0x40d); ++ mii_mgr_write(0, 13, 0x401f); ++ mii_mgr_write(0, 14, 0x2820); ++ ++ udelay(20); //suggest by CD ++ ++ mii_mgr_write(0, 13, 0x1f); // enable MT7530 core clock ++ mii_mgr_write(0, 14, 0x410); ++ mii_mgr_write(0, 13, 0x401f); ++ }else { //20Mhz Xtal ++ ++ /* TODO */ ++ ++ } ++ mii_mgr_write(0, 14, 0x1); /*RGMII*/ ++ ++#if 1 ++ mii_mgr_write(31, 0x7b00, 0x102); //delay setting for 10/1000M ++ mii_mgr_write(31, 0x7b04, 0x14); //delay setting for 10/1000M ++#else ++ mii_mgr_write(31, 0x7b00, 8); // delay setting for 100M ++ mii_mgr_write(31, 0x7b04, 0x14); // for 100M ++#endif ++ /*Tx Driving*/ ++ mii_mgr_write(31, 0x7a54, 0x44); //lower driving ++ mii_mgr_write(31, 0x7a5c, 0x44); //lower driving ++ mii_mgr_write(31, 0x7a64, 0x44); //lower driving ++ mii_mgr_write(31, 0x7a6c, 0x44); //lower driving ++ mii_mgr_write(31, 0x7a74, 0x44); //lower driving ++ mii_mgr_write(31, 0x7a7c, 0x44); //lower driving ++ ++ for(i=0;i<=4;i++) ++ { ++ //turn on PHY ++ mii_mgr_read(i, 0x0 ,®Value); ++ regValue &= ~(0x1<<11); ++ mii_mgr_write(i, 0x0, regValue); ++ } ++ ++ mii_mgr_read(31, 0x7808 ,®Value); ++ regValue |= (3<<16); //Enable INTR ++ mii_mgr_write(31, 0x7808 ,regValue); ++} ++ ++int __init ra2882eth_init(void) ++{ ++ int ret; ++ struct net_device *dev = alloc_etherdev(sizeof(END_DEVICE)); ++ if (!dev) ++ return -ENOMEM; ++ ++ strcpy(dev->name, DEV_NAME); ++ dev->irq = IRQ_ENET0; ++ dev->addr_len = 6; ++ dev->base_addr = RALINK_FRAME_ENGINE_BASE; ++ ++ rather_probe(dev); ++ ra2880_setup_dev_fptable(dev); ++ ++ if ( register_netdev(dev) != 0) { ++ printk(KERN_WARNING " " __FILE__ ": No ethernet port found.\n"); ++ return -ENXIO; ++ } ++ ret = 0; ++ ++ dev_raether = dev; ++ return ret; ++} ++ ++void fe_sw_init(void) ++{ ++ setup_internal_gsw(); ++} ++ ++ ++void ra2882eth_cleanup_module(void) ++{ ++} ++EXPORT_SYMBOL(set_fe_dma_glo_cfg); ++module_init(ra2882eth_init); ++module_exit(ra2882eth_cleanup_module); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/net/ethernet/raeth/raether.h b/drivers/net/ethernet/raeth/raether.h +new file mode 100644 +index 0000000..49326d1 +--- /dev/null ++++ b/drivers/net/ethernet/raeth/raether.h +@@ -0,0 +1,92 @@ ++#ifndef RA2882ETHEND_H ++#define RA2882ETHEND_H ++ ++#ifdef DSP_VIA_NONCACHEABLE ++#define ESRAM_BASE 0xa0800000 /* 0x0080-0000 ~ 0x00807FFF */ ++#else ++#define ESRAM_BASE 0x80800000 /* 0x0080-0000 ~ 0x00807FFF */ ++#endif ++ ++#define RX_RING_BASE ((int)(ESRAM_BASE + 0x7000)) ++#define TX_RING_BASE ((int)(ESRAM_BASE + 0x7800)) ++ ++#if defined(CONFIG_RALINK_RT2880) ++#define NUM_TX_RINGS 1 ++#else ++#define NUM_TX_RINGS 4 ++#endif ++#ifdef MEMORY_OPTIMIZATION ++#ifdef CONFIG_RAETH_ROUTER ++#define NUM_RX_DESC 128 ++#define NUM_TX_DESC 128 ++#elif CONFIG_RT_3052_ESW ++#define NUM_RX_DESC 64 ++#define NUM_TX_DESC 64 ++#else ++#define NUM_RX_DESC 128 ++#define NUM_TX_DESC 128 ++#endif ++//#define NUM_RX_MAX_PROCESS 32 ++#define NUM_RX_MAX_PROCESS 64 ++#else ++#if defined (CONFIG_RAETH_ROUTER) ++#define NUM_RX_DESC 256 ++#define NUM_TX_DESC 256 ++#elif defined (CONFIG_RT_3052_ESW) ++#define NUM_RX_DESC 256 ++#define NUM_TX_DESC 256 ++#else ++#define NUM_RX_DESC 256 ++#define NUM_TX_DESC 256 ++#endif ++#if defined(CONFIG_RALINK_RT3883) || defined(CONFIG_RALINK_MT7620) ++#define NUM_RX_MAX_PROCESS 2 ++#else ++#define NUM_RX_MAX_PROCESS 16 ++#endif ++#endif ++ ++#define DEV_NAME "eth0" ++#define DEV2_NAME "eth3" ++ ++#if defined (CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7621) ++#define GMAC0_OFFSET 0xE000 ++#define GMAC2_OFFSET 0xE006 ++#else ++#define GMAC0_OFFSET 0x28 ++#define GMAC2_OFFSET 0x22 ++#endif ++ ++#if defined(CONFIG_RALINK_RT6855A) ++#define IRQ_ENET0 22 ++#else ++#define IRQ_ENET0 11 /* hardware interrupt #3, defined in RT2880 Soc Design Spec Rev 0.03, pp43 */ ++#endif ++ ++#define FE_INT_STATUS_REG (*(volatile unsigned long *)(FE_INT_STATUS)) ++#define FE_INT_STATUS_CLEAN(reg) (*(volatile unsigned long *)(FE_INT_STATUS)) = reg ++ ++//#define RAETH_DEBUG ++#ifdef RAETH_DEBUG ++#define RAETH_PRINT(fmt, args...) printk(KERN_INFO fmt, ## args) ++#else ++#define RAETH_PRINT(fmt, args...) { } ++#endif ++ ++struct net_device_stats *ra_get_stats(struct net_device *dev); ++ ++void ei_tx_timeout(struct net_device *dev); ++int rather_probe(struct net_device *dev); ++int ei_open(struct net_device *dev); ++int ei_close(struct net_device *dev); ++ ++int ra2882eth_init(void); ++void ra2882eth_cleanup_module(void); ++ ++void ei_xmit_housekeeping(unsigned long data); ++ ++u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data); ++u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data); ++void fe_sw_init(void); ++ ++#endif +diff --git a/drivers/net/ethernet/raeth/raether_pdma.c b/drivers/net/ethernet/raeth/raether_pdma.c +new file mode 100644 +index 0000000..4f1b154 +--- /dev/null ++++ b/drivers/net/ethernet/raeth/raether_pdma.c +@@ -0,0 +1,212 @@ ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/skbuff.h> ++#include <linux/if_vlan.h> ++#include <linux/if_ether.h> ++#include <linux/fs.h> ++#include <asm/uaccess.h> ++#include <linux/delay.h> ++#include <linux/sched.h> ++#include <asm/rt2880/rt_mmap.h> ++#include "ra2882ethreg.h" ++#include "raether.h" ++#include "ra_mac.h" ++ ++#define MAX_RX_LENGTH 1536 ++ ++extern int reg_dbg; ++extern struct net_device *dev_raether; ++static unsigned long tx_ring_full=0; ++ ++#define KSEG1 0xa0000000 ++#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1)) ++#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1) ++ ++extern void set_fe_dma_glo_cfg(void); ++ ++int fe_dma_init(struct net_device *dev) ++{ ++ ++ int i; ++ unsigned int regVal; ++ END_DEVICE* ei_local = netdev_priv(dev); ++ ++ while(1) ++ { ++ regVal = sysRegRead(PDMA_GLO_CFG); ++ if((regVal & RX_DMA_BUSY)) ++ { ++ printk("\n RX_DMA_BUSY !!! "); ++ continue; ++ } ++ if((regVal & TX_DMA_BUSY)) ++ { ++ printk("\n TX_DMA_BUSY !!! "); ++ continue; ++ } ++ break; ++ } ++ ++ for (i=0;i<NUM_TX_DESC;i++){ ++ ei_local->skb_free[i]=0; ++ } ++ ei_local->free_idx =0; ++ ei_local->tx_ring0 = pci_alloc_consistent(NULL, NUM_TX_DESC * sizeof(struct PDMA_txdesc), &ei_local->phy_tx_ring0); ++ printk("\nphy_tx_ring = 0x%08x, tx_ring = 0x%p\n", ei_local->phy_tx_ring0, ei_local->tx_ring0); ++ ++ for (i=0; i < NUM_TX_DESC; i++) { ++ memset(&ei_local->tx_ring0[i],0,sizeof(struct PDMA_txdesc)); ++ ei_local->tx_ring0[i].txd_info2.LS0_bit = 1; ++ ei_local->tx_ring0[i].txd_info2.DDONE_bit = 1; ++ ++ } ++ ++ /* Initial RX Ring 0*/ ++ ei_local->rx_ring0 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring0); ++ for (i = 0; i < NUM_RX_DESC; i++) { ++ memset(&ei_local->rx_ring0[i],0,sizeof(struct PDMA_rxdesc)); ++ ei_local->rx_ring0[i].rxd_info2.DDONE_bit = 0; ++ ei_local->rx_ring0[i].rxd_info2.LS0 = 0; ++ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH; ++ ei_local->rx_ring0[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx0_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE); ++ } ++ printk("\nphy_rx_ring0 = 0x%08x, rx_ring0 = 0x%p\n",ei_local->phy_rx_ring0,ei_local->rx_ring0); ++ ++ ++ regVal = sysRegRead(PDMA_GLO_CFG); ++ regVal &= 0x000000FF; ++ sysRegWrite(PDMA_GLO_CFG, regVal); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "PDMA_GLO_CFG", PDMA_GLO_CFG, regVal); ++ ++ regVal=sysRegRead(PDMA_GLO_CFG); ++ ++ /* Tell the adapter where the TX/RX rings are located. */ ++ sysRegWrite(TX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_tx_ring0)); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_BASE_PTR0", TX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_tx_ring0)); ++ sysRegWrite(TX_MAX_CNT0, cpu_to_le32((u32) NUM_TX_DESC)); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_MAX_CNT0", TX_MAX_CNT0, cpu_to_le32((u32) NUM_TX_DESC)); ++ sysRegWrite(TX_CTX_IDX0, 0); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_CTX_IDX0", TX_CTX_IDX0, 0); ++ sysRegWrite(PDMA_RST_CFG, PST_DTX_IDX0); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "PDMA_RST_CFG", PDMA_RST_CFG, PST_DTX_IDX0); ++ ++ sysRegWrite(RX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_rx_ring0)); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_BASE_PTR0", RX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_rx_ring0)); ++ sysRegWrite(RX_MAX_CNT0, cpu_to_le32((u32) NUM_RX_DESC)); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_MAX_CNT0", RX_MAX_CNT0, cpu_to_le32((u32) NUM_RX_DESC)); ++ sysRegWrite(RX_CALC_IDX0, cpu_to_le32((u32) (NUM_RX_DESC - 1))); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_CALC_IDX0", RX_CALC_IDX0, cpu_to_le32((u32) (NUM_RX_DESC - 1))); ++ sysRegWrite(PDMA_RST_CFG, PST_DRX_IDX0); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "PDMA_RST_CFG", PDMA_RST_CFG, PST_DRX_IDX0); ++ ++ set_fe_dma_glo_cfg(); ++ ++ return 1; ++} ++ ++inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no) ++{ ++ unsigned int length=skb->len; ++ END_DEVICE* ei_local = netdev_priv(dev); ++ unsigned long tx_cpu_owner_idx0 = sysRegRead(TX_CTX_IDX0); ++ ++ while(ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0) ++ { ++ ei_local->stat.tx_errors++; ++ } ++ ++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info1.SDP0 = virt_to_phys(skb->data); ++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.SDL0 = length; ++ if (gmac_no == 1) { ++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info4.FPORT = 1; ++ }else { ++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info4.FPORT = 2; ++ } ++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit = 0; ++ tx_cpu_owner_idx0 = (tx_cpu_owner_idx0+1) % NUM_TX_DESC; ++ while(ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0) ++ { ++ ei_local->stat.tx_errors++; ++ } ++ sysRegWrite(TX_CTX_IDX0, cpu_to_le32((u32)tx_cpu_owner_idx0)); ++ ++ { ++ ei_local->stat.tx_packets++; ++ ei_local->stat.tx_bytes += length; ++ } ++ ++ return length; ++} ++ ++int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no) ++{ ++ END_DEVICE *ei_local = netdev_priv(dev); ++ unsigned long flags; ++ unsigned long tx_cpu_owner_idx; ++ unsigned int tx_cpu_owner_idx_next; ++ unsigned int num_of_txd; ++ unsigned int tx_cpu_owner_idx_next2; ++ ++ dev->trans_start = jiffies; /* save the timestamp */ ++ spin_lock_irqsave(&ei_local->page_lock, flags); ++ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE); ++ ++ tx_cpu_owner_idx = sysRegRead(TX_CTX_IDX0); ++ num_of_txd = 1; ++ tx_cpu_owner_idx_next = (tx_cpu_owner_idx + num_of_txd) % NUM_TX_DESC; ++ ++ if(((ei_local->skb_free[tx_cpu_owner_idx]) ==0) && (ei_local->skb_free[tx_cpu_owner_idx_next]==0)){ ++ rt2880_eth_send(dev, skb, gmac_no); ++ ++ tx_cpu_owner_idx_next2 = (tx_cpu_owner_idx_next + 1) % NUM_TX_DESC; ++ ++ if(ei_local->skb_free[tx_cpu_owner_idx_next2]!=0){ ++ } ++ }else { ++ ei_local->stat.tx_dropped++; ++ kfree_skb(skb); ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return 0; ++ } ++ ++ ei_local->skb_free[tx_cpu_owner_idx] = skb; ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return 0; ++} ++ ++void ei_xmit_housekeeping(unsigned long unused) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ struct PDMA_txdesc *tx_desc; ++ unsigned long skb_free_idx; ++ unsigned long tx_dtx_idx __maybe_unused; ++ unsigned long reg_int_mask=0; ++ ++ tx_dtx_idx = sysRegRead(TX_DTX_IDX0); ++ tx_desc = ei_local->tx_ring0; ++ skb_free_idx = ei_local->free_idx; ++ if ((ei_local->skb_free[skb_free_idx]) != 0 && tx_desc[skb_free_idx].txd_info2.DDONE_bit==1) { ++ while(tx_desc[skb_free_idx].txd_info2.DDONE_bit==1 && (ei_local->skb_free[skb_free_idx])!=0 ){ ++ dev_kfree_skb_any(ei_local->skb_free[skb_free_idx]); ++ ei_local->skb_free[skb_free_idx]=0; ++ skb_free_idx = (skb_free_idx +1) % NUM_TX_DESC; ++ } ++ ++ netif_wake_queue(dev); ++ tx_ring_full=0; ++ ei_local->free_idx = skb_free_idx; ++ } ++ ++ reg_int_mask=sysRegRead(FE_INT_ENABLE); ++ sysRegWrite(FE_INT_ENABLE, reg_int_mask| TX_DLY_INT); ++} ++ ++EXPORT_SYMBOL(ei_start_xmit); ++EXPORT_SYMBOL(ei_xmit_housekeeping); ++EXPORT_SYMBOL(fe_dma_init); ++EXPORT_SYMBOL(rt2880_eth_send); +diff --git a/drivers/net/ethernet/raeth/raether_qdma.c b/drivers/net/ethernet/raeth/raether_qdma.c +new file mode 100644 +index 0000000..4ad2f42 +--- /dev/null ++++ b/drivers/net/ethernet/raeth/raether_qdma.c +@@ -0,0 +1,805 @@ ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/skbuff.h> ++#include <linux/if_vlan.h> ++#include <linux/if_ether.h> ++#include <linux/fs.h> ++#include <asm/uaccess.h> ++#include <asm/rt2880/surfboardint.h> ++#if defined (CONFIG_RAETH_TSO) ++#include <linux/tcp.h> ++#include <net/ipv6.h> ++#include <linux/ip.h> ++#include <net/ip.h> ++#include <net/tcp.h> ++#include <linux/in.h> ++#include <linux/ppp_defs.h> ++#include <linux/if_pppox.h> ++#endif ++#include <linux/delay.h> ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35) ++#include <linux/sched.h> ++#endif ++ ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0) ++#include <asm/rt2880/rt_mmap.h> ++#else ++#include <linux/libata-compat.h> ++#endif ++ ++#include "ra2882ethreg.h" ++#include "raether.h" ++#include "ra_mac.h" ++#include "ra_ioctl.h" ++#include "ra_rfrw.h" ++#ifdef CONFIG_RAETH_NETLINK ++#include "ra_netlink.h" ++#endif ++#if defined (CONFIG_RAETH_QOS) ++#include "ra_qos.h" ++#endif ++ ++#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE) ++#include "../../../net/nat/hw_nat/ra_nat.h" ++#endif ++ ++#if defined (TASKLET_WORKQUEUE_SW) ++int init_schedule; ++int working_schedule; ++#endif ++ ++ ++#if !defined(CONFIG_RA_NAT_NONE) ++/* bruce+ ++ */ ++extern int (*ra_sw_nat_hook_rx)(struct sk_buff *skb); ++extern int (*ra_sw_nat_hook_tx)(struct sk_buff *skb, int gmac_no); ++#endif ++ ++#if defined(CONFIG_RA_CLASSIFIER)||defined(CONFIG_RA_CLASSIFIER_MODULE) ++/* Qwert+ ++ */ ++#include <asm/mipsregs.h> ++extern int (*ra_classifier_hook_tx)(struct sk_buff *skb, unsigned long cur_cycle); ++extern int (*ra_classifier_hook_rx)(struct sk_buff *skb, unsigned long cur_cycle); ++#endif /* CONFIG_RA_CLASSIFIER */ ++ ++#if defined (CONFIG_RALINK_RT3052_MP2) ++int32_t mcast_rx(struct sk_buff * skb); ++int32_t mcast_tx(struct sk_buff * skb); ++#endif ++ ++#ifdef RA_MTD_RW_BY_NUM ++int ra_mtd_read(int num, loff_t from, size_t len, u_char *buf); ++#else ++int ra_mtd_read_nm(char *name, loff_t from, size_t len, u_char *buf); ++#endif ++ ++/* gmac driver feature set config */ ++#if defined (CONFIG_RAETH_NAPI) || defined (CONFIG_RAETH_QOS) ++#undef DELAY_INT ++#else ++#define DELAY_INT 1 ++#endif ++ ++//#define CONFIG_UNH_TEST ++/* end of config */ ++ ++#if defined (CONFIG_RAETH_JUMBOFRAME) ++#define MAX_RX_LENGTH 4096 ++#else ++#define MAX_RX_LENGTH 1536 ++#endif ++ ++extern struct net_device *dev_raether; ++ ++#if defined (CONFIG_RAETH_MULTIPLE_RX_RING) ++static int rx_dma_owner_idx1; ++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR ++static int rx_calc_idx1; ++#endif ++#endif ++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR ++static int rx_calc_idx0; ++static unsigned long tx_cpu_owner_idx0=0; ++#endif ++static unsigned long tx_ring_full=0; ++ ++#if defined (CONFIG_ETHTOOL) && defined (CONFIG_RAETH_ROUTER) ++#include "ra_ethtool.h" ++extern struct ethtool_ops ra_ethtool_ops; ++#ifdef CONFIG_PSEUDO_SUPPORT ++extern struct ethtool_ops ra_virt_ethtool_ops; ++#endif // CONFIG_PSEUDO_SUPPORT // ++#endif // (CONFIG_ETHTOOL // ++ ++#ifdef CONFIG_RALINK_VISTA_BASIC ++int is_switch_175c = 1; ++#endif ++ ++//skb->mark to queue mapping table ++extern unsigned int M2Q_table[64]; ++ ++ ++#define KSEG1 0xa0000000 ++#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1)) ++#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1) ++ ++extern void set_fe_dma_glo_cfg(void); ++ ++ ++/** ++ * ++ * @brief: get the TXD index from its address ++ * ++ * @param: cpu_ptr ++ * ++ * @return: TXD index ++*/ ++ ++static unsigned int GET_TXD_OFFSET(struct QDMA_txdesc **cpu_ptr) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ int ctx_offset; ++ ctx_offset = (((((u32)*cpu_ptr) <<8)>>8) - ((((u32)ei_local->txd_pool)<<8)>>8))/ sizeof(struct QDMA_txdesc); ++ ctx_offset = (*cpu_ptr - ei_local->txd_pool); ++ ++ return ctx_offset; ++} ++ ++ ++ ++/** ++ * @brief get free TXD from TXD queue ++ * ++ * @param free_txd ++ * ++ * @return ++ */ ++static int get_free_txd(struct QDMA_txdesc **free_txd) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ unsigned int tmp_idx; ++ ++ if(ei_local->free_txd_num > 0){ ++ tmp_idx = ei_local->free_txd_head; ++ ei_local->free_txd_head = ei_local->txd_pool_info[tmp_idx]; ++ ei_local->free_txd_num -= 1; ++ *free_txd = &ei_local->txd_pool[tmp_idx]; ++ return tmp_idx; ++ }else ++ return NUM_TX_DESC; ++} ++ ++ ++/** ++ * @brief add free TXD into TXD queue ++ * ++ * @param free_txd ++ * ++ * @return ++ */ ++int put_free_txd(int free_txd_idx) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ ei_local->txd_pool_info[ei_local->free_txd_tail] = free_txd_idx; ++ ei_local->free_txd_tail = free_txd_idx; ++ ei_local->txd_pool_info[free_txd_idx] = NUM_TX_DESC; ++ ei_local->free_txd_num += 1; ++ return 1; ++} ++ ++/*define qdma initial alloc*/ ++/** ++ * @brief ++ * ++ * @param net_dev ++ * ++ * @return 0: fail ++ * 1: success ++ */ ++bool qdma_tx_desc_alloc(void) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ struct QDMA_txdesc *free_txd = NULL; ++ unsigned int txd_idx; ++ int i = 0; ++ ++ ++ ei_local->txd_pool = pci_alloc_consistent(NULL, sizeof(struct QDMA_txdesc) * NUM_TX_DESC, &ei_local->phy_txd_pool); ++ printk("txd_pool=%p phy_txd_pool=%08X\n", ei_local->txd_pool , ei_local->phy_txd_pool); ++ ++ if (ei_local->txd_pool == NULL) { ++ printk("adapter->txd_pool allocation failed!\n"); ++ return 0; ++ } ++ printk("ei_local->skb_free start address is 0x%p.\n", ei_local->skb_free); ++ //set all txd_pool_info to 0. ++ for ( i = 0; i < NUM_TX_DESC; i++) ++ { ++ ei_local->skb_free[i]= 0; ++ ei_local->txd_pool_info[i] = i + 1; ++ ei_local->txd_pool[i].txd_info3.LS_bit = 1; ++ ei_local->txd_pool[i].txd_info3.OWN_bit = 1; ++ } ++ ++ ei_local->free_txd_head = 0; ++ ei_local->free_txd_tail = NUM_TX_DESC - 1; ++ ei_local->free_txd_num = NUM_TX_DESC; ++ ++ ++ //get free txd from txd pool ++ txd_idx = get_free_txd(&free_txd); ++ if( txd_idx == NUM_TX_DESC) { ++ printk("get_free_txd fail\n"); ++ return 0; ++ } ++ ++ //add null TXD for transmit ++ ei_local->tx_dma_ptr = VIRT_TO_PHYS(free_txd); ++ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd); ++ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr); ++ sysRegWrite(QTX_DTX_PTR, ei_local->tx_dma_ptr); ++ ++ //get free txd from txd pool ++ ++ txd_idx = get_free_txd(&free_txd); ++ if( txd_idx == NUM_TX_DESC) { ++ printk("get_free_txd fail\n"); ++ return 0; ++ } ++ // add null TXD for release ++ sysRegWrite(QTX_CRX_PTR, VIRT_TO_PHYS(free_txd)); ++ sysRegWrite(QTX_DRX_PTR, VIRT_TO_PHYS(free_txd)); ++ ++ printk("free_txd: %p, ei_local->cpu_ptr: %08X\n", free_txd, ei_local->tx_cpu_ptr); ++ ++ printk(" POOL HEAD_PTR | DMA_PTR | CPU_PTR \n"); ++ printk("----------------+---------+--------\n"); ++#if 1 ++ printk(" 0x%p 0x%08X 0x%08X\n",ei_local->txd_pool, ++ ei_local->tx_dma_ptr, ei_local->tx_cpu_ptr); ++#endif ++ return 1; ++} ++ ++bool fq_qdma_init(void) ++{ ++ struct QDMA_txdesc *free_head = NULL; ++ unsigned int free_head_phy; ++ unsigned int free_tail_phy; ++ unsigned int *free_page_head = NULL; ++ unsigned int free_page_head_phy; ++ int i; ++ ++ free_head = pci_alloc_consistent(NULL, NUM_QDMA_PAGE * sizeof(struct QDMA_txdesc), &free_head_phy); ++ if (unlikely(free_head == NULL)){ ++ printk(KERN_ERR "QDMA FQ decriptor not available...\n"); ++ return 0; ++ } ++ memset(free_head, 0x0, sizeof(struct QDMA_txdesc) * NUM_QDMA_PAGE); ++ ++ free_page_head = pci_alloc_consistent(NULL, NUM_QDMA_PAGE * QDMA_PAGE_SIZE, &free_page_head_phy); ++ if (unlikely(free_page_head == NULL)){ ++ printk(KERN_ERR "QDMA FQ pager not available...\n"); ++ return 0; ++ } ++ for (i=0; i < NUM_QDMA_PAGE; i++) { ++ free_head[i].txd_info1.SDP = (free_page_head_phy + (i * QDMA_PAGE_SIZE)); ++ if(i < (NUM_QDMA_PAGE-1)){ ++ free_head[i].txd_info2.NDP = (free_head_phy + ((i+1) * sizeof(struct QDMA_txdesc))); ++ ++ ++#if 0 ++ printk("free_head_phy[%d] is 0x%x!!!\n",i, VIRT_TO_PHYS(&free_head[i]) ); ++ printk("free_head[%d] is 0x%x!!!\n",i, &free_head[i] ); ++ printk("free_head[%d].txd_info1.SDP is 0x%x!!!\n",i, free_head[i].txd_info1.SDP ); ++ printk("free_head[%d].txd_info2.NDP is 0x%x!!!\n",i, free_head[i].txd_info2.NDP ); ++#endif ++ } ++ free_head[i].txd_info3.SDL = QDMA_PAGE_SIZE; ++ ++ } ++ free_tail_phy = (free_head_phy + (u32)((NUM_QDMA_PAGE-1) * sizeof(struct QDMA_txdesc))); ++ ++ printk("free_head_phy is 0x%x!!!\n", free_head_phy); ++ printk("free_tail_phy is 0x%x!!!\n", free_tail_phy); ++ sysRegWrite(QDMA_FQ_HEAD, (u32)free_head_phy); ++ sysRegWrite(QDMA_FQ_TAIL, (u32)free_tail_phy); ++ sysRegWrite(QDMA_FQ_CNT, ((NUM_TX_DESC << 16) | NUM_QDMA_PAGE)); ++ sysRegWrite(QDMA_FQ_BLEN, QDMA_PAGE_SIZE << 16); ++ return 1; ++} ++ ++int fe_dma_init(struct net_device *dev) ++{ ++ ++ int i; ++ unsigned int regVal; ++ END_DEVICE* ei_local = netdev_priv(dev); ++ ++ fq_qdma_init(); ++ ++ while(1) ++ { ++ regVal = sysRegRead(QDMA_GLO_CFG); ++ if((regVal & RX_DMA_BUSY)) ++ { ++ printk("\n RX_DMA_BUSY !!! "); ++ continue; ++ } ++ if((regVal & TX_DMA_BUSY)) ++ { ++ printk("\n TX_DMA_BUSY !!! "); ++ continue; ++ } ++ break; ++ } ++ /*tx desc alloc, add a NULL TXD to HW*/ ++ ++ qdma_tx_desc_alloc(); ++ ++ ++ /* Initial RX Ring 0*/ ++#ifdef CONFIG_32B_DESC ++ ei_local->rx_ring0 = kmalloc(NUM_RX_DESC * sizeof(struct PDMA_rxdesc), GFP_KERNEL); ++ ei_local->phy_rx_ring0 = virt_to_phys(ei_local->rx_ring0); ++#else ++ ei_local->rx_ring0 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring0); ++#endif ++ for (i = 0; i < NUM_RX_DESC; i++) { ++ memset(&ei_local->rx_ring0[i],0,sizeof(struct PDMA_rxdesc)); ++ ei_local->rx_ring0[i].rxd_info2.DDONE_bit = 0; ++#if defined (CONFIG_RAETH_SCATTER_GATHER_RX_DMA) ++ ei_local->rx_ring0[i].rxd_info2.LS0 = 0; ++ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH; ++#else ++ ei_local->rx_ring0[i].rxd_info2.LS0 = 1; ++#endif ++ ei_local->rx_ring0[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx0_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE); ++ } ++ printk("\nphy_rx_ring0 = 0x%08x, rx_ring0 = 0x%p\n",ei_local->phy_rx_ring0,ei_local->rx_ring0); ++ ++#if defined (CONFIG_RAETH_MULTIPLE_RX_RING) ++ /* Initial RX Ring 1*/ ++#ifdef CONFIG_32B_DESC ++ ei_local->rx_ring1 = kmalloc(NUM_RX_DESC * sizeof(struct PDMA_rxdesc), GFP_KERNEL); ++ ei_local->phy_rx_ring1 = virt_to_phys(ei_local->rx_ring1); ++#else ++ ei_local->rx_ring1 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring1); ++#endif ++ for (i = 0; i < NUM_RX_DESC; i++) { ++ memset(&ei_local->rx_ring1[i],0,sizeof(struct PDMA_rxdesc)); ++ ei_local->rx_ring1[i].rxd_info2.DDONE_bit = 0; ++#if defined (CONFIG_RAETH_SCATTER_GATHER_RX_DMA) ++ ei_local->rx_ring0[i].rxd_info2.LS0 = 0; ++ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH; ++#else ++ ei_local->rx_ring1[i].rxd_info2.LS0 = 1; ++#endif ++ ei_local->rx_ring1[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx1_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE); ++ } ++ printk("\nphy_rx_ring1 = 0x%08x, rx_ring1 = 0x%p\n",ei_local->phy_rx_ring1,ei_local->rx_ring1); ++#endif ++ ++ regVal = sysRegRead(QDMA_GLO_CFG); ++ regVal &= 0x000000FF; ++ sysRegWrite(QDMA_GLO_CFG, regVal); ++ regVal=sysRegRead(QDMA_GLO_CFG); ++ ++ /* Tell the adapter where the TX/RX rings are located. */ ++ ++ sysRegWrite(QRX_BASE_PTR_0, phys_to_bus((u32) ei_local->phy_rx_ring0)); ++ sysRegWrite(QRX_MAX_CNT_0, cpu_to_le32((u32) NUM_RX_DESC)); ++ sysRegWrite(QRX_CRX_IDX_0, cpu_to_le32((u32) (NUM_RX_DESC - 1))); ++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR ++ rx_calc_idx0 = rx_dma_owner_idx0 = sysRegRead(QRX_CRX_IDX_0); ++#endif ++ sysRegWrite(QDMA_RST_CFG, PST_DRX_IDX0); ++#if defined (CONFIG_RAETH_MULTIPLE_RX_RING) ++ sysRegWrite(QRX_BASE_PTR_1, phys_to_bus((u32) ei_local->phy_rx_ring1)); ++ sysRegWrite(QRX_MAX_CNT_1, cpu_to_le32((u32) NUM_RX_DESC)); ++ sysRegWrite(QRX_CRX_IDX_1, cpu_to_le32((u32) (NUM_RX_DESC - 1))); ++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR ++ rx_calc_idx1 = rx_dma_owner_idx1 = sysRegRead(QRX_CRX_IDX_1); ++#endif ++ sysRegWrite(QDMA_RST_CFG, PST_DRX_IDX1); ++#endif ++ ++ set_fe_dma_glo_cfg(); ++ ++ return 1; ++} ++ ++inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no) ++{ ++ unsigned int length=skb->len; ++ END_DEVICE* ei_local = netdev_priv(dev); ++ ++ struct QDMA_txdesc *cpu_ptr; ++ ++ struct QDMA_txdesc *dma_ptr __maybe_unused; ++ struct QDMA_txdesc *free_txd; ++ int ctx_offset; ++#if defined (CONFIG_RAETH_TSO) ++ struct iphdr *iph = NULL; ++ struct QDMA_txdesc *init_cpu_ptr; ++ struct tcphdr *th = NULL; ++ struct skb_frag_struct *frag; ++ unsigned int nr_frags = skb_shinfo(skb)->nr_frags; ++ int i=0; ++ int init_txd_idx; ++#endif // CONFIG_RAETH_TSO // ++ ++#if defined (CONFIG_RAETH_TSOV6) ++ struct ipv6hdr *ip6h = NULL; ++#endif ++ ++#ifdef CONFIG_PSEUDO_SUPPORT ++ PSEUDO_ADAPTER *pAd; ++#endif ++ cpu_ptr = PHYS_TO_VIRT(ei_local->tx_cpu_ptr); ++ dma_ptr = PHYS_TO_VIRT(ei_local->tx_dma_ptr); ++ ctx_offset = GET_TXD_OFFSET(&cpu_ptr); ++ ei_local->skb_free[ctx_offset] = skb; ++#if defined (CONFIG_RAETH_TSO) ++ init_cpu_ptr = cpu_ptr; ++ init_txd_idx = ctx_offset; ++#endif ++ ++#if !defined (CONFIG_RAETH_TSO) ++ ++ //2. prepare data ++ cpu_ptr->txd_info1.SDP = VIRT_TO_PHYS(skb->data); ++ cpu_ptr->txd_info3.SDL = skb->len; ++ ++ if (gmac_no == 1) { ++ cpu_ptr->txd_info4.FPORT = 1; ++ }else { ++ cpu_ptr->txd_info4.FPORT = 2; ++ } ++ ++ ++ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark]; ++#if 0 ++ iph = (struct iphdr *)skb_network_header(skb); ++ if (iph->tos == 0xe0) ++ cpu_ptr->txd_info3.QID = 3; ++ else if (iph->tos == 0xa0) ++ cpu_ptr->txd_info3.QID = 2; ++ else if (iph->tos == 0x20) ++ cpu_ptr->txd_info3.QID = 1; ++ else ++ cpu_ptr->txd_info3.QID = 0; ++#endif ++ ++#if defined (CONFIG_RAETH_CHECKSUM_OFFLOAD) && ! defined(CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628) ++ if (skb->ip_summed == CHECKSUM_PARTIAL){ ++ cpu_ptr->txd_info4.TUI_CO = 7; ++ }else { ++ cpu_ptr->txd_info4.TUI_CO = 0; ++ } ++#endif ++ ++#ifdef CONFIG_RAETH_HW_VLAN_TX ++ if(vlan_tx_tag_present(skb)) { ++ cpu_ptr->txd_info4.VLAN_TAG = 0x10000 | vlan_tx_tag_get(skb); ++ }else { ++ cpu_ptr->txd_info4.VLAN_TAG = 0; ++ } ++#endif ++ ++#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE) ++ if(FOE_MAGIC_TAG(skb) == FOE_MAGIC_PPE) { ++ if(ra_sw_nat_hook_rx!= NULL){ ++ cpu_ptr->txd_info4.FPORT = 4; /* PPE */ ++ FOE_MAGIC_TAG(skb) = 0; ++ } ++ } ++#endif ++#if 0 ++ cpu_ptr->txd_info4.FPORT = 4; /* PPE */ ++ cpu_ptr->txd_info4.UDF = 0x2F; ++#endif ++ ++ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE); ++ cpu_ptr->txd_info3.SWC_bit = 1; ++ ++ //3. get NULL TXD and decrease free_tx_num by 1. ++ ctx_offset = get_free_txd(&free_txd); ++ if(ctx_offset == NUM_TX_DESC) { ++ printk("get_free_txd fail\n"); // this should not happen. free_txd_num is 2 at least. ++ return 0; ++ } ++ ++ //4. hook new TXD in the end of queue ++ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd); ++ ++ ++ //5. move CPU_PTR to new TXD ++ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd); ++ cpu_ptr->txd_info3.OWN_bit = 0; ++ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr); ++ ++#if 0 ++ printk("----------------------------------------------\n"); ++ printk("txd_info1:%08X \n",*(int *)&cpu_ptr->txd_info1); ++ printk("txd_info2:%08X \n",*(int *)&cpu_ptr->txd_info2); ++ printk("txd_info3:%08X \n",*(int *)&cpu_ptr->txd_info3); ++ printk("txd_info4:%08X \n",*(int *)&cpu_ptr->txd_info4); ++#endif ++ ++#else //#if !defined (CONFIG_RAETH_TSO) ++ cpu_ptr->txd_info1.SDP = VIRT_TO_PHYS(skb->data); ++ cpu_ptr->txd_info3.SDL = (length - skb->data_len); ++ cpu_ptr->txd_info3.LS_bit = nr_frags ? 0:1; ++ if (gmac_no == 1) { ++ cpu_ptr->txd_info4.FPORT = 1; ++ }else { ++ cpu_ptr->txd_info4.FPORT = 2; ++ } ++ ++ cpu_ptr->txd_info4.TSO = 0; ++ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark]; ++#if defined (CONFIG_RAETH_CHECKSUM_OFFLOAD) && ! defined(CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628) ++ if (skb->ip_summed == CHECKSUM_PARTIAL){ ++ cpu_ptr->txd_info4.TUI_CO = 7; ++ }else { ++ cpu_ptr->txd_info4.TUI_CO = 0; ++ } ++#endif ++ ++#ifdef CONFIG_RAETH_HW_VLAN_TX ++ if(vlan_tx_tag_present(skb)) { ++ cpu_ptr->txd_info4.VLAN_TAG = 0x10000 | vlan_tx_tag_get(skb); ++ }else { ++ cpu_ptr->txd_info4.VLAN_TAG = 0; ++ } ++#endif ++ ++#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE) ++ if(FOE_MAGIC_TAG(skb) == FOE_MAGIC_PPE) { ++ if(ra_sw_nat_hook_rx!= NULL){ ++ cpu_ptr->txd_info4.FPORT = 4; /* PPE */ ++ FOE_MAGIC_TAG(skb) = 0; ++ } ++ } ++#endif ++ ++ cpu_ptr->txd_info3.SWC_bit = 1; ++ ++ ctx_offset = get_free_txd(&free_txd); ++ if(ctx_offset == NUM_TX_DESC) { ++ printk("get_free_txd fail\n"); ++ return 0; ++ } ++ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd); ++ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd); ++ ++ if(nr_frags > 0) { ++ for(i=0;i<nr_frags;i++) { ++ frag = &skb_shinfo(skb)->frags[i]; ++ cpu_ptr = free_txd; ++ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark]; ++ cpu_ptr->txd_info1.SDP = pci_map_page(NULL, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE); ++ cpu_ptr->txd_info3.SDL = frag->size; ++ cpu_ptr->txd_info3.LS_bit = (i==nr_frags-1)?1:0; ++ cpu_ptr->txd_info3.OWN_bit = 0; ++ cpu_ptr->txd_info3.SWC_bit = 1; ++ ei_local->skb_free[ctx_offset] = (i==nr_frags-1)?skb:(struct sk_buff *)0xFFFFFFFF; //MAGIC ID ++ ++ ctx_offset = get_free_txd(&free_txd); ++ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd); ++ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd); ++ } ++ ei_local->skb_free[init_txd_idx]= (struct sk_buff *)0xFFFFFFFF; //MAGIC ID ++ } ++ ++ if(skb_shinfo(skb)->gso_segs > 1) { ++ ++// TsoLenUpdate(skb->len); ++ ++ /* TCP over IPv4 */ ++ iph = (struct iphdr *)skb_network_header(skb); ++#if defined (CONFIG_RAETH_TSOV6) ++ /* TCP over IPv6 */ ++ ip6h = (struct ipv6hdr *)skb_network_header(skb); ++#endif ++ if((iph->version == 4) && (iph->protocol == IPPROTO_TCP)) { ++ th = (struct tcphdr *)skb_transport_header(skb); ++ ++ init_cpu_ptr->txd_info4.TSO = 1; ++ ++ th->check = htons(skb_shinfo(skb)->gso_size); ++ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE); ++ } ++ ++#if defined (CONFIG_RAETH_TSOV6) ++ /* TCP over IPv6 */ ++ //ip6h = (struct ipv6hdr *)skb_network_header(skb); ++ else if ((ip6h->version == 6) && (ip6h->nexthdr == NEXTHDR_TCP)) { ++ th = (struct tcphdr *)skb_transport_header(skb); ++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR ++ init_cpu_ptr->txd_info4.TSO = 1; ++#else ++ init_cpu_ptr->txd_info4.TSO = 1; ++#endif ++ th->check = htons(skb_shinfo(skb)->gso_size); ++ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE); ++ } ++#endif ++ } ++ ++ ++// dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE); ++ ++ init_cpu_ptr->txd_info3.OWN_bit = 0; ++#endif // CONFIG_RAETH_TSO // ++ ++ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr); ++ ++#ifdef CONFIG_PSEUDO_SUPPORT ++ if (gmac_no == 2) { ++ if (ei_local->PseudoDev != NULL) { ++ pAd = netdev_priv(ei_local->PseudoDev); ++ pAd->stat.tx_packets++; ++ pAd->stat.tx_bytes += length; ++ } ++ } else ++ ++#endif ++ { ++ ei_local->stat.tx_packets++; ++ ei_local->stat.tx_bytes += skb->len; ++ } ++ return length; ++} ++ ++int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no) ++{ ++ END_DEVICE *ei_local = netdev_priv(dev); ++ unsigned long flags; ++ unsigned int num_of_txd; ++#if defined (CONFIG_RAETH_TSO) ++ unsigned int nr_frags = skb_shinfo(skb)->nr_frags; ++#endif ++#ifdef CONFIG_PSEUDO_SUPPORT ++ PSEUDO_ADAPTER *pAd; ++#endif ++ ++#if !defined(CONFIG_RA_NAT_NONE) ++ if(ra_sw_nat_hook_tx!= NULL) ++ { ++ spin_lock_irqsave(&ei_local->page_lock, flags); ++ if(ra_sw_nat_hook_tx(skb, gmac_no)==1){ ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ }else{ ++ kfree_skb(skb); ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return 0; ++ } ++ } ++#endif ++ ++ ++ ++ dev->trans_start = jiffies; /* save the timestamp */ ++ spin_lock_irqsave(&ei_local->page_lock, flags); ++ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE); ++ ++ ++//check free_txd_num before calling rt288_eth_send() ++ ++#if defined (CONFIG_RAETH_TSO) ++ num_of_txd = (nr_frags==0) ? 1 : (nr_frags + 1); ++#else ++ num_of_txd = 1; ++#endif ++ ++#if defined(CONFIG_RALINK_MT7621) ++ if(sysRegRead(0xbe00000c)==0x00030101) { ++ ei_xmit_housekeeping(0); ++ } ++#endif ++ ++ ++ if ((ei_local->free_txd_num > num_of_txd + 1) && (ei_local->free_txd_num != NUM_TX_DESC)) ++ { ++ rt2880_eth_send(dev, skb, gmac_no); // need to modify rt2880_eth_send() for QDMA ++ if (ei_local->free_txd_num < 3) ++ { ++#if defined (CONFIG_RAETH_STOP_RX_WHEN_TX_FULL) ++ netif_stop_queue(dev); ++#ifdef CONFIG_PSEUDO_SUPPORT ++ netif_stop_queue(ei_local->PseudoDev); ++#endif ++ tx_ring_full = 1; ++#endif ++ } ++ } else { ++#ifdef CONFIG_PSEUDO_SUPPORT ++ if (gmac_no == 2) ++ { ++ if (ei_local->PseudoDev != NULL) ++ { ++ pAd = netdev_priv(ei_local->PseudoDev); ++ pAd->stat.tx_dropped++; ++ } ++ } else ++#endif ++ ei_local->stat.tx_dropped++; ++ kfree_skb(skb); ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return 0; ++ } ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return 0; ++} ++ ++void ei_xmit_housekeeping(unsigned long unused) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++#ifndef CONFIG_RAETH_NAPI ++ unsigned long reg_int_mask=0; ++#endif ++ struct QDMA_txdesc *dma_ptr = NULL; ++ struct QDMA_txdesc *cpu_ptr = NULL; ++ struct QDMA_txdesc *tmp_ptr = NULL; ++ unsigned int htx_offset = 0; ++ ++ dma_ptr = PHYS_TO_VIRT(sysRegRead(QTX_DRX_PTR)); ++ cpu_ptr = PHYS_TO_VIRT(sysRegRead(QTX_CRX_PTR)); ++ if(cpu_ptr != dma_ptr && (cpu_ptr->txd_info3.OWN_bit == 1)) { ++ while(cpu_ptr != dma_ptr && (cpu_ptr->txd_info3.OWN_bit == 1)) { ++ ++ //1. keep cpu next TXD ++ tmp_ptr = PHYS_TO_VIRT(cpu_ptr->txd_info2.NDP); ++ htx_offset = GET_TXD_OFFSET(&tmp_ptr); ++ //2. free skb meomry ++#if defined (CONFIG_RAETH_TSO) ++ if(ei_local->skb_free[htx_offset]!=(struct sk_buff *)0xFFFFFFFF) { ++ dev_kfree_skb_any(ei_local->skb_free[htx_offset]); ++ } ++#else ++ dev_kfree_skb_any(ei_local->skb_free[htx_offset]); ++#endif ++ ++ //3. release TXD ++ htx_offset = GET_TXD_OFFSET(&cpu_ptr); ++ put_free_txd(htx_offset); ++ ++ netif_wake_queue(dev); ++#ifdef CONFIG_PSEUDO_SUPPORT ++ netif_wake_queue(ei_local->PseudoDev); ++#endif ++ tx_ring_full=0; ++ ++ //4. update cpu_ptr to next ptr ++ cpu_ptr = tmp_ptr; ++ } ++ } ++ sysRegWrite(QTX_CRX_PTR, VIRT_TO_PHYS(cpu_ptr)); ++#ifndef CONFIG_RAETH_NAPI ++ reg_int_mask=sysRegRead(QFE_INT_ENABLE); ++#if defined (DELAY_INT) ++ sysRegWrite(FE_INT_ENABLE, reg_int_mask| RLS_DLY_INT); ++#else ++ ++ sysRegWrite(FE_INT_ENABLE, reg_int_mask | RLS_DONE_INT); ++#endif ++#endif //CONFIG_RAETH_NAPI// ++} ++ ++EXPORT_SYMBOL(ei_start_xmit); ++EXPORT_SYMBOL(ei_xmit_housekeeping); ++EXPORT_SYMBOL(fe_dma_init); ++EXPORT_SYMBOL(rt2880_eth_send); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0037-USB-phy-add-ralink-SoC-driver.patch b/target/linux/ramips/patches-3.14/0037-USB-phy-add-ralink-SoC-driver.patch new file mode 100644 index 0000000000..b0c9a1af8b --- /dev/null +++ b/target/linux/ramips/patches-3.14/0037-USB-phy-add-ralink-SoC-driver.patch @@ -0,0 +1,240 @@ +From 900fa0abfea0cb7562c523769981dadc25f1f8cd Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:43:42 +0100 +Subject: [PATCH 37/57] USB: phy: add ralink SoC driver + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/usb/phy/Kconfig | 8 ++ + drivers/usb/phy/Makefile | 1 + + drivers/usb/phy/ralink-phy.c | 190 ++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 199 insertions(+) + create mode 100644 drivers/usb/phy/ralink-phy.c + +diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig +index 7d1451d..fc04d76 100644 +--- a/drivers/usb/phy/Kconfig ++++ b/drivers/usb/phy/Kconfig +@@ -251,6 +251,14 @@ config USB_RCAR_GEN2_PHY + To compile this driver as a module, choose M here: the + module will be called phy-rcar-gen2-usb. + ++config RALINK_USBPHY ++ bool "Ralink USB PHY controller Driver" ++ depends on MIPS && RALINK ++ select USB_PHY ++ help ++ Enable this to support ralink USB phy controller for ralink ++ SoCs. ++ + config USB_ULPI + bool "Generic ULPI Transceiver Driver" + depends on ARM +diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile +index be58ada..52d59c1 100644 +--- a/drivers/usb/phy/Makefile ++++ b/drivers/usb/phy/Makefile +@@ -33,3 +33,4 @@ obj-$(CONFIG_USB_RCAR_GEN2_PHY) += phy-rcar-gen2-usb.o + obj-$(CONFIG_USB_ULPI) += phy-ulpi.o + obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o + obj-$(CONFIG_KEYSTONE_USB_PHY) += phy-keystone.o ++obj-$(CONFIG_RALINK_USBPHY) += ralink-phy.o +diff --git a/drivers/usb/phy/ralink-phy.c b/drivers/usb/phy/ralink-phy.c +new file mode 100644 +index 0000000..28046e5 +--- /dev/null ++++ b/drivers/usb/phy/ralink-phy.c +@@ -0,0 +1,190 @@ ++/* ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ * ++ * based on: Renesas R-Car USB phy driver ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/delay.h> ++#include <linux/io.h> ++#include <linux/usb/otg.h> ++#include <linux/of_platform.h> ++#include <linux/platform_device.h> ++#include <linux/spinlock.h> ++#include <linux/module.h> ++#include <linux/reset.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++ ++#define RT_SYSC_REG_SYSCFG1 0x014 ++#define RT_SYSC_REG_CLKCFG1 0x030 ++#define RT_SYSC_REG_USB_PHY_CFG 0x05c ++ ++#define RT_RSTCTRL_UDEV BIT(25) ++#define RT_RSTCTRL_UHST BIT(22) ++#define RT_SYSCFG1_USB0_HOST_MODE BIT(10) ++ ++#define MT7620_CLKCFG1_UPHY0_CLK_EN BIT(25) ++#define RT_CLKCFG1_UPHY1_CLK_EN BIT(20) ++#define RT_CLKCFG1_UPHY0_CLK_EN BIT(18) ++ ++#define USB_PHY_UTMI_8B60M BIT(1) ++#define UDEV_WAKEUP BIT(0) ++ ++static atomic_t usb_pwr_ref = ATOMIC_INIT(0); ++static struct reset_control *rstdev; ++static struct reset_control *rsthost; ++static u32 phy_clk; ++ ++static void usb_phy_enable(int state) ++{ ++ if (state) ++ rt_sysc_m32(0, phy_clk, RT_SYSC_REG_CLKCFG1); ++ else ++ rt_sysc_m32(phy_clk, 0, RT_SYSC_REG_CLKCFG1); ++ mdelay(100); ++} ++ ++static int usb_power_on(struct usb_phy *phy) ++{ ++ if (atomic_inc_return(&usb_pwr_ref) == 1) { ++ u32 t; ++ ++ usb_phy_enable(1); ++ ++// reset_control_assert(rstdev); ++// reset_control_assert(rsthost); ++ ++ if (OTG_STATE_B_HOST) { ++ rt_sysc_m32(0, RT_SYSCFG1_USB0_HOST_MODE, RT_SYSC_REG_SYSCFG1); ++ if (!IS_ERR(rsthost)) ++ reset_control_deassert(rsthost); ++ } else { ++ rt_sysc_m32(RT_SYSCFG1_USB0_HOST_MODE, 0, RT_SYSC_REG_SYSCFG1); ++ if (!IS_ERR(rstdev)) ++ reset_control_deassert(rstdev); ++ } ++ mdelay(100); ++ ++ t = rt_sysc_r32(RT_SYSC_REG_USB_PHY_CFG); ++ dev_info(phy->dev, "remote usb device wakeup %s\n", ++ (t & UDEV_WAKEUP) ? ("enabbled") : ("disabled")); ++ if (t & USB_PHY_UTMI_8B60M) ++ dev_info(phy->dev, "UTMI 8bit 60MHz\n"); ++ else ++ dev_info(phy->dev, "UTMI 16bit 30MHz\n"); ++ } ++ ++ return 0; ++} ++ ++static void usb_power_off(struct usb_phy *phy) ++{ ++ if (atomic_dec_return(&usb_pwr_ref) == 0) { ++ usb_phy_enable(0); ++ if (!IS_ERR(rstdev)) ++ reset_control_assert(rstdev); ++ if (!IS_ERR(rsthost)) ++ reset_control_assert(rsthost); ++ } ++} ++ ++static int usb_set_host(struct usb_otg *otg, struct usb_bus *host) ++{ ++ otg->gadget = NULL; ++ otg->host = host; ++ ++ return 0; ++} ++ ++static int usb_set_peripheral(struct usb_otg *otg, ++ struct usb_gadget *gadget) ++{ ++ otg->host = NULL; ++ otg->gadget = gadget; ++ ++ return 0; ++} ++ ++static const struct of_device_id ralink_usbphy_dt_match[] = { ++ { .compatible = "ralink,rt3xxx-usbphy", .data = (void *) (RT_CLKCFG1_UPHY1_CLK_EN | RT_CLKCFG1_UPHY0_CLK_EN) }, ++ { .compatible = "ralink,mt7620a-usbphy", .data = (void *) MT7620_CLKCFG1_UPHY0_CLK_EN }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ralink_usbphy_dt_match); ++ ++static int usb_phy_probe(struct platform_device *pdev) ++{ ++ const struct of_device_id *match; ++ struct device *dev = &pdev->dev; ++ struct usb_otg *otg; ++ struct usb_phy *phy; ++ int ret; ++ ++ match = of_match_device(ralink_usbphy_dt_match, &pdev->dev); ++ phy_clk = (int) match->data; ++ ++ rsthost = devm_reset_control_get(&pdev->dev, "host"); ++ rstdev = devm_reset_control_get(&pdev->dev, "device"); ++ ++ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); ++ if (!phy) { ++ dev_err(&pdev->dev, "unable to allocate memory for USB PHY\n"); ++ return -ENOMEM; ++ } ++ ++ otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); ++ if (!otg) { ++ dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n"); ++ return -ENOMEM; ++ } ++ ++ phy->dev = dev; ++ phy->label = dev_name(dev); ++ phy->init = usb_power_on; ++ phy->shutdown = usb_power_off; ++ otg->set_host = usb_set_host; ++ otg->set_peripheral = usb_set_peripheral; ++ otg->phy = phy; ++ phy->otg = otg; ++ ret = usb_add_phy(phy, USB_PHY_TYPE_USB2); ++ ++ if (ret < 0) { ++ dev_err(dev, "usb phy addition error\n"); ++ return ret; ++ } ++ ++ platform_set_drvdata(pdev, phy); ++ ++ dev_info(&pdev->dev, "loaded\n"); ++ ++ return ret; ++} ++ ++static int usb_phy_remove(struct platform_device *pdev) ++{ ++ struct usb_phy *phy = platform_get_drvdata(pdev); ++ ++ usb_remove_phy(phy); ++ ++ return 0; ++} ++ ++static struct platform_driver usb_phy_driver = { ++ .driver = { ++ .owner = THIS_MODULE, ++ .name = "rt3xxx-usbphy", ++ .of_match_table = of_match_ptr(ralink_usbphy_dt_match), ++ }, ++ .probe = usb_phy_probe, ++ .remove = usb_phy_remove, ++}; ++ ++module_platform_driver(usb_phy_driver); ++ ++MODULE_LICENSE("GPL v2"); ++MODULE_DESCRIPTION("Ralink USB phy"); ++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0038-USB-add-OHCI-EHCI-OF-binding.patch b/target/linux/ramips/patches-3.14/0038-USB-add-OHCI-EHCI-OF-binding.patch new file mode 100644 index 0000000000..87d2c30232 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0038-USB-add-OHCI-EHCI-OF-binding.patch @@ -0,0 +1,191 @@ +From ffb27de4760595c356ef619c97f25722c8db28e7 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:49:07 +0100 +Subject: [PATCH 38/57] USB: add OHCI/EHCI OF binding + +based on f3bc64d6d1f21c1b92d75f233a37b75d77af6963 + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/usb/Makefile | 3 ++- + drivers/usb/host/ehci-platform.c | 21 +++++++++++++++++---- + drivers/usb/host/ohci-platform.c | 37 +++++++++++++++++++++++++++++++------ + 3 files changed, 50 insertions(+), 11 deletions(-) + +diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile +index 1ae2bf3..aaa15d9 100644 +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -11,6 +11,8 @@ obj-$(CONFIG_USB_DWC2) += dwc2/ + + obj-$(CONFIG_USB_MON) += mon/ + ++obj-$(CONFIG_USB_PHY) += phy/ ++ + obj-$(CONFIG_PCI) += host/ + obj-$(CONFIG_USB_EHCI_HCD) += host/ + obj-$(CONFIG_USB_ISP116X_HCD) += host/ +@@ -41,7 +43,6 @@ obj-$(CONFIG_USB_TMC) += class/ + obj-$(CONFIG_USB_STORAGE) += storage/ + obj-$(CONFIG_USB) += storage/ + +-obj-$(CONFIG_USB_MDC800) += image/ + obj-$(CONFIG_USB_MICROTEK) += image/ + + obj-$(CONFIG_USB_SERIAL) += serial/ +diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c +index 01536cf..1b9a8f4 100644 +--- a/drivers/usb/host/ehci-platform.c ++++ b/drivers/usb/host/ehci-platform.c +@@ -29,6 +29,8 @@ + #include <linux/usb.h> + #include <linux/usb/hcd.h> + #include <linux/usb/ehci_pdriver.h> ++#include <linux/usb/phy.h> ++#include <linux/usb/otg.h> + + #include "ehci.h" + +@@ -123,6 +125,15 @@ static int ehci_platform_probe(struct platform_device *dev) + hcd->rsrc_start = res_mem->start; + hcd->rsrc_len = resource_size(res_mem); + ++#ifdef CONFIG_USB_PHY ++ hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2); ++ if (!IS_ERR_OR_NULL(hcd->phy)) { ++ otg_set_host(hcd->phy->otg, ++ &hcd->self); ++ usb_phy_init(hcd->phy); ++ } ++#endif ++ + hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); + if (IS_ERR(hcd->regs)) { + err = PTR_ERR(hcd->regs); +@@ -160,6 +171,9 @@ static int ehci_platform_remove(struct platform_device *dev) + if (pdata == &ehci_platform_defaults) + dev->dev.platform_data = NULL; + ++ if (pdata == &ehci_platform_defaults) ++ dev->dev.platform_data = NULL; ++ + return 0; + } + +@@ -204,9 +218,8 @@ static int ehci_platform_resume(struct device *dev) + #define ehci_platform_resume NULL + #endif /* CONFIG_PM */ + +-static const struct of_device_id vt8500_ehci_ids[] = { +- { .compatible = "via,vt8500-ehci", }, +- { .compatible = "wm,prizm-ehci", }, ++static const struct of_device_id ralink_ehci_ids[] = { ++ { .compatible = "ralink,rt3xxx-ehci", }, + {} + }; + +@@ -230,7 +243,7 @@ static struct platform_driver ehci_platform_driver = { + .owner = THIS_MODULE, + .name = "ehci-platform", + .pm = &ehci_platform_pm_ops, +- .of_match_table = vt8500_ehci_ids, ++ .of_match_table = ralink_ehci_ids, + } + }; + +diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c +index 68f674c..2a73fed 100644 +--- a/drivers/usb/host/ohci-platform.c ++++ b/drivers/usb/host/ohci-platform.c +@@ -23,17 +23,20 @@ + #include <linux/usb/ohci_pdriver.h> + #include <linux/usb.h> + #include <linux/usb/hcd.h> ++#include <linux/dma-mapping.h> ++#include <linux/of.h> + + #include "ohci.h" + + #define DRIVER_DESC "OHCI generic platform driver" + ++static struct usb_ohci_pdata ohci_platform_defaults; + static const char hcd_name[] = "ohci-platform"; + + static int ohci_platform_reset(struct usb_hcd *hcd) + { + struct platform_device *pdev = to_platform_device(hcd->self.controller); +- struct usb_ohci_pdata *pdata = dev_get_platdata(&pdev->dev); ++ struct usb_ohci_pdata *pdata; + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + + if (pdata->big_endian_desc) +@@ -63,11 +66,18 @@ static int ohci_platform_probe(struct platform_device *dev) + int irq; + int err = -ENOMEM; + +- if (!pdata) { +- WARN_ON(1); +- return -ENODEV; +- } +- ++ /* ++ * use reasonable defaults so platforms don't have to provide these. ++ * with DT probing on ARM, none of these are set. ++ */ ++ if (!dev->dev.platform_data) ++ dev->dev.platform_data = &ohci_platform_defaults; ++ if (!dev->dev.dma_mask) ++ dev->dev.dma_mask = &dev->dev.coherent_dma_mask; ++ if (!dev->dev.coherent_dma_mask) ++ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32); ++ ++ pdata = dev->dev.platform_data; + if (usb_disabled()) + return -ENODEV; + +@@ -99,6 +109,12 @@ static int ohci_platform_probe(struct platform_device *dev) + hcd->rsrc_start = res_mem->start; + hcd->rsrc_len = resource_size(res_mem); + ++#ifdef CONFIG_USB_PHY ++ hcd->phy = devm_usb_get_phy(&dev->dev, USB_PHY_TYPE_USB2); ++ if (!IS_ERR_OR_NULL(hcd->phy)) ++ usb_phy_init(hcd->phy); ++#endif ++ + hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); + if (IS_ERR(hcd->regs)) { + err = PTR_ERR(hcd->regs); +@@ -134,6 +150,9 @@ static int ohci_platform_remove(struct platform_device *dev) + if (pdata->power_off) + pdata->power_off(dev); + ++ if (pdata == &ohci_platform_defaults) ++ dev->dev.platform_data = NULL; ++ + return 0; + } + +@@ -180,6 +199,11 @@ static int ohci_platform_resume(struct device *dev) + #define ohci_platform_resume NULL + #endif /* CONFIG_PM */ + ++static const struct of_device_id ralink_ohci_ids[] = { ++ { .compatible = "ralink,rt3xxx-ohci", }, ++ {} ++}; ++ + static const struct platform_device_id ohci_platform_table[] = { + { "ohci-platform", 0 }, + { } +@@ -200,6 +224,7 @@ static struct platform_driver ohci_platform_driver = { + .owner = THIS_MODULE, + .name = "ohci-platform", + .pm = &ohci_platform_pm_ops, ++ .of_match_table = of_match_ptr(ralink_ohci_ids), + } + }; + +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0039-USB-adds-dwc_otg.patch b/target/linux/ramips/patches-3.14/0039-USB-adds-dwc_otg.patch new file mode 100644 index 0000000000..c7592ac1ef --- /dev/null +++ b/target/linux/ramips/patches-3.14/0039-USB-adds-dwc_otg.patch @@ -0,0 +1,24581 @@ +From 761432b4edfa1276726c082ba21199236c13a23f Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:50:54 +0100 +Subject: [PATCH 39/57] USB: adds dwc_otg + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/usb/Kconfig | 2 + + drivers/usb/Makefile | 1 + + drivers/usb/dwc_otg/Kconfig | 24 + + drivers/usb/dwc_otg/Makefile | 25 + + drivers/usb/dwc_otg/dummy_audio.c | 1575 +++++++++++++ + drivers/usb/dwc_otg/dwc_otg_attr.c | 966 ++++++++ + drivers/usb/dwc_otg/dwc_otg_attr.h | 67 + + drivers/usb/dwc_otg/dwc_otg_cil.c | 3692 ++++++++++++++++++++++++++++++ + drivers/usb/dwc_otg/dwc_otg_cil.h | 1098 +++++++++ + drivers/usb/dwc_otg/dwc_otg_cil_intr.c | 750 ++++++ + drivers/usb/dwc_otg/dwc_otg_driver.c | 1273 ++++++++++ + drivers/usb/dwc_otg/dwc_otg_driver.h | 83 + + drivers/usb/dwc_otg/dwc_otg_hcd.c | 2852 +++++++++++++++++++++++ + drivers/usb/dwc_otg/dwc_otg_hcd.h | 668 ++++++ + drivers/usb/dwc_otg/dwc_otg_hcd_intr.c | 1873 +++++++++++++++ + drivers/usb/dwc_otg/dwc_otg_hcd_queue.c | 684 ++++++ + drivers/usb/dwc_otg/dwc_otg_pcd.c | 2523 ++++++++++++++++++++ + drivers/usb/dwc_otg/dwc_otg_pcd.h | 248 ++ + drivers/usb/dwc_otg/dwc_otg_pcd_intr.c | 3654 +++++++++++++++++++++++++++++ + drivers/usb/dwc_otg/dwc_otg_regs.h | 2075 +++++++++++++++++ + drivers/usb/dwc_otg/linux/dwc_otg_plat.h | 260 +++ + 21 files changed, 24393 insertions(+) + create mode 100644 drivers/usb/dwc_otg/Kconfig + create mode 100644 drivers/usb/dwc_otg/Makefile + create mode 100644 drivers/usb/dwc_otg/dummy_audio.c + create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.c + create mode 100644 drivers/usb/dwc_otg/dwc_otg_attr.h + create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.c + create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil.h + create mode 100644 drivers/usb/dwc_otg/dwc_otg_cil_intr.c + create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.c + create mode 100644 drivers/usb/dwc_otg/dwc_otg_driver.h + create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.c + create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd.h + create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_intr.c + create mode 100644 drivers/usb/dwc_otg/dwc_otg_hcd_queue.c + create mode 100644 drivers/usb/dwc_otg/dwc_otg_pcd.c + create mode 100644 drivers/usb/dwc_otg/dwc_otg_pcd.h + create mode 100644 drivers/usb/dwc_otg/dwc_otg_pcd_intr.c + create mode 100644 drivers/usb/dwc_otg/dwc_otg_regs.h + create mode 100644 drivers/usb/dwc_otg/linux/dwc_otg_plat.h + +diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig +index 2e6b832..45d766e 100644 +--- a/drivers/usb/Kconfig ++++ b/drivers/usb/Kconfig +@@ -88,6 +88,8 @@ if USB + + source "drivers/usb/core/Kconfig" + ++source "drivers/usb/dwc_otg/Kconfig" ++ + source "drivers/usb/mon/Kconfig" + + source "drivers/usb/wusbcore/Kconfig" +diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile +index aaa15d9..5205cf0 100644 +--- a/drivers/usb/Makefile ++++ b/drivers/usb/Makefile +@@ -8,6 +8,7 @@ obj-$(CONFIG_USB) += core/ + + obj-$(CONFIG_USB_DWC3) += dwc3/ + obj-$(CONFIG_USB_DWC2) += dwc2/ ++obj-$(CONFIG_DWC_OTG) += dwc_otg/ + + obj-$(CONFIG_USB_MON) += mon/ + +diff --git a/drivers/usb/dwc_otg/Kconfig b/drivers/usb/dwc_otg/Kconfig +new file mode 100644 +index 0000000..6dd75f1 +--- /dev/null ++++ b/drivers/usb/dwc_otg/Kconfig +@@ -0,0 +1,24 @@ ++config DWC_OTG ++ tristate "Ralink RT305X DWC_OTG support" ++ depends on SOC_RT305X ++ ---help--- ++ This driver supports Ralink DWC_OTG ++ ++choice ++ prompt "USB Operation Mode" ++ depends on DWC_OTG ++ default DWC_OTG_HOST_ONLY ++ ++config DWC_OTG_HOST_ONLY ++ bool "HOST ONLY MODE" ++ depends on DWC_OTG ++ ++config DWC_OTG_DEVICE_ONLY ++ bool "DEVICE ONLY MODE" ++ depends on DWC_OTG ++ ++endchoice ++ ++config DWC_OTG_DEBUG ++ bool "Enable debug mode" ++ depends on DWC_OTG +diff --git a/drivers/usb/dwc_otg/Makefile b/drivers/usb/dwc_otg/Makefile +new file mode 100644 +index 0000000..95c5b66 +--- /dev/null ++++ b/drivers/usb/dwc_otg/Makefile +@@ -0,0 +1,25 @@ ++# ++# Makefile for DWC_otg Highspeed USB controller driver ++# ++ ++ifeq ($(CONFIG_DWC_OTG_DEBUG),y) ++EXTRA_CFLAGS += -DDEBUG ++endif ++ ++# Use one of the following flags to compile the software in host-only or ++# device-only mode. ++ifeq ($(CONFIG_DWC_OTG_HOST_ONLY),y) ++EXTRA_CFLAGS += -DDWC_HOST_ONLY ++EXTRA_CFLAGS += -DDWC_EN_ISOC ++endif ++ ++ifeq ($(CONFIG_DWC_OTG_DEVICE_ONLY),y) ++EXTRA_CFLAGS += -DDWC_DEVICE_ONLY ++endif ++ ++obj-$(CONFIG_DWC_OTG) := dwc_otg.o ++ ++dwc_otg-objs := dwc_otg_driver.o dwc_otg_attr.o ++dwc_otg-objs += dwc_otg_cil.o dwc_otg_cil_intr.o ++dwc_otg-objs += dwc_otg_pcd.o dwc_otg_pcd_intr.o ++dwc_otg-objs += dwc_otg_hcd.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o +diff --git a/drivers/usb/dwc_otg/dummy_audio.c b/drivers/usb/dwc_otg/dummy_audio.c +new file mode 100644 +index 0000000..225decf +--- /dev/null ++++ b/drivers/usb/dwc_otg/dummy_audio.c +@@ -0,0 +1,1575 @@ ++/* ++ * zero.c -- Gadget Zero, for USB development ++ * ++ * Copyright (C) 2003-2004 David Brownell ++ * All rights reserved. ++ * ++ * Redistribution and use in source and binary forms, with or without ++ * modification, are permitted provided that the following conditions ++ * are met: ++ * 1. Redistributions of source code must retain the above copyright ++ * notice, this list of conditions, and the following disclaimer, ++ * without modification. ++ * 2. Redistributions in binary form must reproduce the above copyright ++ * notice, this list of conditions and the following disclaimer in the ++ * documentation and/or other materials provided with the distribution. ++ * 3. The names of the above-listed copyright holders may not be used ++ * to endorse or promote products derived from this software without ++ * specific prior written permission. ++ * ++ * ALTERNATIVELY, this software may be distributed under the terms of the ++ * GNU General Public License ("GPL") as published by the Free Software ++ * Foundation, either version 2 of that License or (at your option) any ++ * later version. ++ * ++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS ++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, ++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR ++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR ++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, ++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, ++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR ++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF ++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING ++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS ++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ */ ++ ++ ++/* ++ * Gadget Zero only needs two bulk endpoints, and is an example of how you ++ * can write a hardware-agnostic gadget driver running inside a USB device. ++ * ++ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't ++ * affect most of the driver. ++ * ++ * Use it with the Linux host/master side "usbtest" driver to get a basic ++ * functional test of your device-side usb stack, or with "usb-skeleton". ++ * ++ * It supports two similar configurations. One sinks whatever the usb host ++ * writes, and in return sources zeroes. The other loops whatever the host ++ * writes back, so the host can read it. Module options include: ++ * ++ * buflen=N default N=4096, buffer size used ++ * qlen=N default N=32, how many buffers in the loopback queue ++ * loopdefault default false, list loopback config first ++ * ++ * Many drivers will only have one configuration, letting them be much ++ * simpler if they also don't support high speed operation (like this ++ * driver does). ++ */ ++ ++#include <linux/config.h> ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/delay.h> ++#include <linux/ioport.h> ++#include <linux/sched.h> ++#include <linux/slab.h> ++#include <linux/smp_lock.h> ++#include <linux/errno.h> ++#include <linux/init.h> ++#include <linux/timer.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/uts.h> ++#include <linux/version.h> ++#include <linux/device.h> ++#include <linux/moduleparam.h> ++#include <linux/proc_fs.h> ++ ++#include <asm/byteorder.h> ++#include <asm/io.h> ++#include <asm/irq.h> ++#include <asm/system.h> ++#include <asm/unaligned.h> ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) ++# include <linux/usb/ch9.h> ++#else ++# include <linux/usb_ch9.h> ++#endif ++ ++#include <linux/usb_gadget.h> ++ ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len) ++{ ++ int count = 0; ++ u8 c; ++ u16 uchar; ++ ++ /* this insists on correct encodings, though not minimal ones. ++ * BUT it currently rejects legit 4-byte UTF-8 code points, ++ * which need surrogate pairs. (Unicode 3.1 can use them.) ++ */ ++ while (len != 0 && (c = (u8) *s++) != 0) { ++ if (unlikely(c & 0x80)) { ++ // 2-byte sequence: ++ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx ++ if ((c & 0xe0) == 0xc0) { ++ uchar = (c & 0x1f) << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ // 3-byte sequence (most CJKV characters): ++ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx ++ } else if ((c & 0xf0) == 0xe0) { ++ uchar = (c & 0x0f) << 12; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c << 6; ++ ++ c = (u8) *s++; ++ if ((c & 0xc0) != 0xc0) ++ goto fail; ++ c &= 0x3f; ++ uchar |= c; ++ ++ /* no bogus surrogates */ ++ if (0xd800 <= uchar && uchar <= 0xdfff) ++ goto fail; ++ ++ // 4-byte sequence (surrogate pairs, currently rare): ++ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx ++ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx ++ // (uuuuu = wwww + 1) ++ // FIXME accept the surrogate code points (only) ++ ++ } else ++ goto fail; ++ } else ++ uchar = c; ++ put_unaligned (cpu_to_le16 (uchar), cp++); ++ count++; ++ len--; ++ } ++ return count; ++fail: ++ return -1; ++} ++ ++ ++/** ++ * usb_gadget_get_string - fill out a string descriptor ++ * @table: of c strings encoded using UTF-8 ++ * @id: string id, from low byte of wValue in get string descriptor ++ * @buf: at least 256 bytes ++ * ++ * Finds the UTF-8 string matching the ID, and converts it into a ++ * string descriptor in utf16-le. ++ * Returns length of descriptor (always even) or negative errno ++ * ++ * If your driver needs stings in multiple languages, you'll probably ++ * "switch (wIndex) { ... }" in your ep0 string descriptor logic, ++ * using this routine after choosing which set of UTF-8 strings to use. ++ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with ++ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1 ++ * characters (which are also widely used in C strings). ++ */ ++int ++usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf) ++{ ++ struct usb_string *s; ++ int len; ++ ++ /* descriptor 0 has the language id */ ++ if (id == 0) { ++ buf [0] = 4; ++ buf [1] = USB_DT_STRING; ++ buf [2] = (u8) table->language; ++ buf [3] = (u8) (table->language >> 8); ++ return 4; ++ } ++ for (s = table->strings; s && s->s; s++) ++ if (s->id == id) ++ break; ++ ++ /* unrecognized: stall. */ ++ if (!s || !s->s) ++ return -EINVAL; ++ ++ /* string descriptors have length, tag, then UTF16-LE text */ ++ len = min ((size_t) 126, strlen (s->s)); ++ memset (buf + 2, 0, 2 * len); /* zero all the bytes */ ++ len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len); ++ if (len < 0) ++ return -EINVAL; ++ buf [0] = (len + 1) * 2; ++ buf [1] = USB_DT_STRING; ++ return buf [0]; ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++/** ++ * usb_descriptor_fillbuf - fill buffer with descriptors ++ * @buf: Buffer to be filled ++ * @buflen: Size of buf ++ * @src: Array of descriptor pointers, terminated by null pointer. ++ * ++ * Copies descriptors into the buffer, returning the length or a ++ * negative error code if they can't all be copied. Useful when ++ * assembling descriptors for an associated set of interfaces used ++ * as part of configuring a composite device; or in other cases where ++ * sets of descriptors need to be marshaled. ++ */ ++int ++usb_descriptor_fillbuf(void *buf, unsigned buflen, ++ const struct usb_descriptor_header **src) ++{ ++ u8 *dest = buf; ++ ++ if (!src) ++ return -EINVAL; ++ ++ /* fill buffer from src[] until null descriptor ptr */ ++ for (; 0 != *src; src++) { ++ unsigned len = (*src)->bLength; ++ ++ if (len > buflen) ++ return -EINVAL; ++ memcpy(dest, *src, len); ++ buflen -= len; ++ dest += len; ++ } ++ return dest - (u8 *)buf; ++} ++ ++ ++/** ++ * usb_gadget_config_buf - builts a complete configuration descriptor ++ * @config: Header for the descriptor, including characteristics such ++ * as power requirements and number of interfaces. ++ * @desc: Null-terminated vector of pointers to the descriptors (interface, ++ * endpoint, etc) defining all functions in this device configuration. ++ * @buf: Buffer for the resulting configuration descriptor. ++ * @length: Length of buffer. If this is not big enough to hold the ++ * entire configuration descriptor, an error code will be returned. ++ * ++ * This copies descriptors into the response buffer, building a descriptor ++ * for that configuration. It returns the buffer length or a negative ++ * status code. The config.wTotalLength field is set to match the length ++ * of the result, but other descriptor fields (including power usage and ++ * interface count) must be set by the caller. ++ * ++ * Gadget drivers could use this when constructing a config descriptor ++ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the ++ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed. ++ */ ++int usb_gadget_config_buf( ++ const struct usb_config_descriptor *config, ++ void *buf, ++ unsigned length, ++ const struct usb_descriptor_header **desc ++) ++{ ++ struct usb_config_descriptor *cp = buf; ++ int len; ++ ++ /* config descriptor first */ ++ if (length < USB_DT_CONFIG_SIZE || !desc) ++ return -EINVAL; ++ *cp = *config; ++ ++ /* then interface/endpoint/class/vendor/... */ ++ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf, ++ length - USB_DT_CONFIG_SIZE, desc); ++ if (len < 0) ++ return len; ++ len += USB_DT_CONFIG_SIZE; ++ if (len > 0xffff) ++ return -EINVAL; ++ ++ /* patch up the config descriptor */ ++ cp->bLength = USB_DT_CONFIG_SIZE; ++ cp->bDescriptorType = USB_DT_CONFIG; ++ cp->wTotalLength = cpu_to_le16(len); ++ cp->bmAttributes |= USB_CONFIG_ATT_ONE; ++ return len; ++} ++ ++/*-------------------------------------------------------------------------*/ ++/*-------------------------------------------------------------------------*/ ++ ++ ++#define RBUF_LEN (1024*1024) ++static int rbuf_start; ++static int rbuf_len; ++static __u8 rbuf[RBUF_LEN]; ++ ++/*-------------------------------------------------------------------------*/ ++ ++#define DRIVER_VERSION "St Patrick's Day 2004" ++ ++static const char shortname [] = "zero"; ++static const char longname [] = "YAMAHA YST-MS35D USB Speaker "; ++ ++static const char source_sink [] = "source and sink data"; ++static const char loopback [] = "loop input to output"; ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * driver assumes self-powered hardware, and ++ * has no way for users to trigger remote wakeup. ++ * ++ * this version autoconfigures as much as possible, ++ * which is reasonable for most "bulk-only" drivers. ++ */ ++static const char *EP_IN_NAME; /* source */ ++static const char *EP_OUT_NAME; /* sink */ ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* big enough to hold our biggest descriptor */ ++#define USB_BUFSIZ 512 ++ ++struct zero_dev { ++ spinlock_t lock; ++ struct usb_gadget *gadget; ++ struct usb_request *req; /* for control responses */ ++ ++ /* when configured, we have one of two configs: ++ * - source data (in to host) and sink it (out from host) ++ * - or loop it back (out from host back in to host) ++ */ ++ u8 config; ++ struct usb_ep *in_ep, *out_ep; ++ ++ /* autoresume timer */ ++ struct timer_list resume; ++}; ++ ++#define xprintk(d,level,fmt,args...) \ ++ dev_printk(level , &(d)->gadget->dev , fmt , ## args) ++ ++#ifdef DEBUG ++#define DBG(dev,fmt,args...) \ ++ xprintk(dev , KERN_DEBUG , fmt , ## args) ++#else ++#define DBG(dev,fmt,args...) \ ++ do { } while (0) ++#endif /* DEBUG */ ++ ++#ifdef VERBOSE ++#define VDBG DBG ++#else ++#define VDBG(dev,fmt,args...) \ ++ do { } while (0) ++#endif /* VERBOSE */ ++ ++#define ERROR(dev,fmt,args...) \ ++ xprintk(dev , KERN_ERR , fmt , ## args) ++#define WARN(dev,fmt,args...) \ ++ xprintk(dev , KERN_WARNING , fmt , ## args) ++#define INFO(dev,fmt,args...) \ ++ xprintk(dev , KERN_INFO , fmt , ## args) ++ ++/*-------------------------------------------------------------------------*/ ++ ++static unsigned buflen = 4096; ++static unsigned qlen = 32; ++static unsigned pattern = 0; ++ ++module_param (buflen, uint, S_IRUGO|S_IWUSR); ++module_param (qlen, uint, S_IRUGO|S_IWUSR); ++module_param (pattern, uint, S_IRUGO|S_IWUSR); ++ ++/* ++ * if it's nonzero, autoresume says how many seconds to wait ++ * before trying to wake up the host after suspend. ++ */ ++static unsigned autoresume = 0; ++module_param (autoresume, uint, 0); ++ ++/* ++ * Normally the "loopback" configuration is second (index 1) so ++ * it's not the default. Here's where to change that order, to ++ * work better with hosts where config changes are problematic. ++ * Or controllers (like superh) that only support one config. ++ */ ++static int loopdefault = 0; ++ ++module_param (loopdefault, bool, S_IRUGO|S_IWUSR); ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* Thanks to NetChip Technologies for donating this product ID. ++ * ++ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!! ++ * Instead: allocate your own, using normal USB-IF procedures. ++ */ ++#ifndef CONFIG_USB_ZERO_HNPTEST ++#define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ ++#define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ ++#else ++#define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ ++#define DRIVER_PRODUCT_NUM 0xbadd ++#endif ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* ++ * DESCRIPTORS ... most are static, but strings and (full) ++ * configuration descriptors are built on demand. ++ */ ++ ++/* ++#define STRING_MANUFACTURER 25 ++#define STRING_PRODUCT 42 ++#define STRING_SERIAL 101 ++*/ ++#define STRING_MANUFACTURER 1 ++#define STRING_PRODUCT 2 ++#define STRING_SERIAL 3 ++ ++#define STRING_SOURCE_SINK 250 ++#define STRING_LOOPBACK 251 ++ ++/* ++ * This device advertises two configurations; these numbers work ++ * on a pxa250 as well as more flexible hardware. ++ */ ++#define CONFIG_SOURCE_SINK 3 ++#define CONFIG_LOOPBACK 2 ++ ++/* ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ ++ .bcdUSB = __constant_cpu_to_le16 (0x0200), ++ .bDeviceClass = USB_CLASS_VENDOR_SPEC, ++ ++ .idVendor = __constant_cpu_to_le16 (DRIVER_VENDOR_NUM), ++ .idProduct = __constant_cpu_to_le16 (DRIVER_PRODUCT_NUM), ++ .iManufacturer = STRING_MANUFACTURER, ++ .iProduct = STRING_PRODUCT, ++ .iSerialNumber = STRING_SERIAL, ++ .bNumConfigurations = 2, ++}; ++*/ ++static struct usb_device_descriptor ++device_desc = { ++ .bLength = sizeof device_desc, ++ .bDescriptorType = USB_DT_DEVICE, ++ .bcdUSB = __constant_cpu_to_le16 (0x0100), ++ .bDeviceClass = USB_CLASS_PER_INTERFACE, ++ .bDeviceSubClass = 0, ++ .bDeviceProtocol = 0, ++ .bMaxPacketSize0 = 64, ++ .bcdDevice = __constant_cpu_to_le16 (0x0100), ++ .idVendor = __constant_cpu_to_le16 (0x0499), ++ .idProduct = __constant_cpu_to_le16 (0x3002), ++ .iManufacturer = STRING_MANUFACTURER, ++ .iProduct = STRING_PRODUCT, ++ .iSerialNumber = STRING_SERIAL, ++ .bNumConfigurations = 1, ++}; ++ ++static struct usb_config_descriptor ++z_config = { ++ .bLength = sizeof z_config, ++ .bDescriptorType = USB_DT_CONFIG, ++ ++ /* compute wTotalLength on the fly */ ++ .bNumInterfaces = 2, ++ .bConfigurationValue = 1, ++ .iConfiguration = 0, ++ .bmAttributes = 0x40, ++ .bMaxPower = 0, /* self-powered */ ++}; ++ ++ ++static struct usb_otg_descriptor ++otg_descriptor = { ++ .bLength = sizeof otg_descriptor, ++ .bDescriptorType = USB_DT_OTG, ++ ++ .bmAttributes = USB_OTG_SRP, ++}; ++ ++/* one interface in each configuration */ ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ ++/* ++ * usb 2.0 devices need to expose both high speed and full speed ++ * descriptors, unless they only run at full speed. ++ * ++ * that means alternate endpoint descriptors (bigger packets) ++ * and a "device qualifier" ... plus more construction options ++ * for the config descriptor. ++ */ ++ ++static struct usb_qualifier_descriptor ++dev_qualifier = { ++ .bLength = sizeof dev_qualifier, ++ .bDescriptorType = USB_DT_DEVICE_QUALIFIER, ++ ++ .bcdUSB = __constant_cpu_to_le16 (0x0200), ++ .bDeviceClass = USB_CLASS_VENDOR_SPEC, ++ ++ .bNumConfigurations = 2, ++}; ++ ++ ++struct usb_cs_as_general_descriptor { ++ __u8 bLength; ++ __u8 bDescriptorType; ++ ++ __u8 bDescriptorSubType; ++ __u8 bTerminalLink; ++ __u8 bDelay; ++ __u16 wFormatTag; ++} __attribute__ ((packed)); ++ ++struct usb_cs_as_format_descriptor { ++ __u8 bLength; ++ __u8 bDescriptorType; ++ ++ __u8 bDescriptorSubType; ++ __u8 bFormatType; ++ __u8 bNrChannels; ++ __u8 bSubframeSize; ++ __u8 bBitResolution; ++ __u8 bSamfreqType; ++ __u8 tLowerSamFreq[3]; ++ __u8 tUpperSamFreq[3]; ++} __attribute__ ((packed)); ++ ++static const struct usb_interface_descriptor ++z_audio_control_if_desc = { ++ .bLength = sizeof z_audio_control_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 0, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = 0, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x1, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_interface_descriptor ++z_audio_if_desc = { ++ .bLength = sizeof z_audio_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 1, ++ .bAlternateSetting = 0, ++ .bNumEndpoints = 0, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x2, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_interface_descriptor ++z_audio_if_desc2 = { ++ .bLength = sizeof z_audio_if_desc, ++ .bDescriptorType = USB_DT_INTERFACE, ++ .bInterfaceNumber = 1, ++ .bAlternateSetting = 1, ++ .bNumEndpoints = 1, ++ .bInterfaceClass = USB_CLASS_AUDIO, ++ .bInterfaceSubClass = 0x2, ++ .bInterfaceProtocol = 0, ++ .iInterface = 0, ++}; ++ ++static const struct usb_cs_as_general_descriptor ++z_audio_cs_as_if_desc = { ++ .bLength = 7, ++ .bDescriptorType = 0x24, ++ ++ .bDescriptorSubType = 0x01, ++ .bTerminalLink = 0x01, ++ .bDelay = 0x0, ++ .wFormatTag = __constant_cpu_to_le16 (0x0001) ++}; ++ ++ ++static const struct usb_cs_as_format_descriptor ++z_audio_cs_as_format_desc = { ++ .bLength = 0xe, ++ .bDescriptorType = 0x24, ++ ++ .bDescriptorSubType = 2, ++ .bFormatType = 1, ++ .bNrChannels = 1, ++ .bSubframeSize = 1, ++ .bBitResolution = 8, ++ .bSamfreqType = 0, ++ .tLowerSamFreq = {0x7e, 0x13, 0x00}, ++ .tUpperSamFreq = {0xe2, 0xd6, 0x00}, ++}; ++ ++static const struct usb_endpoint_descriptor ++z_iso_ep = { ++ .bLength = 0x09, ++ .bDescriptorType = 0x05, ++ .bEndpointAddress = 0x04, ++ .bmAttributes = 0x09, ++ .wMaxPacketSize = 0x0038, ++ .bInterval = 0x01, ++ .bRefresh = 0x00, ++ .bSynchAddress = 0x00, ++}; ++ ++static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++// 9 bytes ++static char z_ac_interface_header_desc[] = ++{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 }; ++ ++// 12 bytes ++static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02, ++ 0x03, 0x00, 0x00, 0x00}; ++// 13 bytes ++static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00, ++ 0x02, 0x00, 0x02, 0x00, 0x00}; ++// 9 bytes ++static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02, ++ 0x00}; ++ ++static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00, ++ 0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00, ++ 0x00}; ++ ++static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00, ++ 0x00}; ++ ++static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00}; ++ ++static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00, ++ 0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00}; ++ ++static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00, ++ 0x00}; ++ ++static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02}; ++ ++ ++ ++static const struct usb_descriptor_header *z_function [] = { ++ (struct usb_descriptor_header *) &z_audio_control_if_desc, ++ (struct usb_descriptor_header *) &z_ac_interface_header_desc, ++ (struct usb_descriptor_header *) &z_0, ++ (struct usb_descriptor_header *) &z_1, ++ (struct usb_descriptor_header *) &z_2, ++ (struct usb_descriptor_header *) &z_audio_if_desc, ++ (struct usb_descriptor_header *) &z_audio_if_desc2, ++ (struct usb_descriptor_header *) &z_audio_cs_as_if_desc, ++ (struct usb_descriptor_header *) &z_audio_cs_as_format_desc, ++ (struct usb_descriptor_header *) &z_iso_ep, ++ (struct usb_descriptor_header *) &z_iso_ep2, ++ (struct usb_descriptor_header *) &za_0, ++ (struct usb_descriptor_header *) &za_1, ++ (struct usb_descriptor_header *) &za_2, ++ (struct usb_descriptor_header *) &za_3, ++ (struct usb_descriptor_header *) &za_4, ++ (struct usb_descriptor_header *) &za_5, ++ (struct usb_descriptor_header *) &za_6, ++ (struct usb_descriptor_header *) &za_7, ++ (struct usb_descriptor_header *) &za_8, ++ (struct usb_descriptor_header *) &za_9, ++ (struct usb_descriptor_header *) &za_10, ++ (struct usb_descriptor_header *) &za_11, ++ (struct usb_descriptor_header *) &za_12, ++ (struct usb_descriptor_header *) &za_13, ++ (struct usb_descriptor_header *) &za_14, ++ (struct usb_descriptor_header *) &za_15, ++ (struct usb_descriptor_header *) &za_16, ++ (struct usb_descriptor_header *) &za_17, ++ (struct usb_descriptor_header *) &za_18, ++ (struct usb_descriptor_header *) &za_19, ++ (struct usb_descriptor_header *) &za_20, ++ (struct usb_descriptor_header *) &za_21, ++ (struct usb_descriptor_header *) &za_22, ++ (struct usb_descriptor_header *) &za_23, ++ (struct usb_descriptor_header *) &za_24, ++ NULL, ++}; ++ ++/* maxpacket and other transfer characteristics vary by speed. */ ++#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs)) ++ ++#else ++ ++/* if there's no high speed support, maxpacket doesn't change. */ ++#define ep_desc(g,hs,fs) fs ++ ++#endif /* !CONFIG_USB_GADGET_DUALSPEED */ ++ ++static char manufacturer [40]; ++//static char serial [40]; ++static char serial [] = "Ser 00 em"; ++ ++/* static strings, in UTF-8 */ ++static struct usb_string strings [] = { ++ { STRING_MANUFACTURER, manufacturer, }, ++ { STRING_PRODUCT, longname, }, ++ { STRING_SERIAL, serial, }, ++ { STRING_LOOPBACK, loopback, }, ++ { STRING_SOURCE_SINK, source_sink, }, ++ { } /* end of list */ ++}; ++ ++static struct usb_gadget_strings stringtab = { ++ .language = 0x0409, /* en-us */ ++ .strings = strings, ++}; ++ ++/* ++ * config descriptors are also handcrafted. these must agree with code ++ * that sets configurations, and with code managing interfaces and their ++ * altsettings. other complexity may come from: ++ * ++ * - high speed support, including "other speed config" rules ++ * - multiple configurations ++ * - interfaces with alternate settings ++ * - embedded class or vendor-specific descriptors ++ * ++ * this handles high speed, and has a second config that could as easily ++ * have been an alternate interface setting (on most hardware). ++ * ++ * NOTE: to demonstrate (and test) more USB capabilities, this driver ++ * should include an altsetting to test interrupt transfers, including ++ * high bandwidth modes at high speed. (Maybe work like Intel's test ++ * device?) ++ */ ++static int ++config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index) ++{ ++ int len; ++ const struct usb_descriptor_header **function; ++ ++ function = z_function; ++ len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function); ++ if (len < 0) ++ return len; ++ ((struct usb_config_descriptor *) buf)->bDescriptorType = type; ++ return len; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_request * ++alloc_ep_req (struct usb_ep *ep, unsigned length) ++{ ++ struct usb_request *req; ++ ++ req = usb_ep_alloc_request (ep, GFP_ATOMIC); ++ if (req) { ++ req->length = length; ++ req->buf = usb_ep_alloc_buffer (ep, length, ++ &req->dma, GFP_ATOMIC); ++ if (!req->buf) { ++ usb_ep_free_request (ep, req); ++ req = NULL; ++ } ++ } ++ return req; ++} ++ ++static void free_ep_req (struct usb_ep *ep, struct usb_request *req) ++{ ++ if (req->buf) ++ usb_ep_free_buffer (ep, req->buf, req->dma, req->length); ++ usb_ep_free_request (ep, req); ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++/* optionally require specific source/sink data patterns */ ++ ++static int ++check_read_data ( ++ struct zero_dev *dev, ++ struct usb_ep *ep, ++ struct usb_request *req ++) ++{ ++ unsigned i; ++ u8 *buf = req->buf; ++ ++ for (i = 0; i < req->actual; i++, buf++) { ++ switch (pattern) { ++ /* all-zeroes has no synchronization issues */ ++ case 0: ++ if (*buf == 0) ++ continue; ++ break; ++ /* mod63 stays in sync with short-terminated transfers, ++ * or otherwise when host and gadget agree on how large ++ * each usb transfer request should be. resync is done ++ * with set_interface or set_config. ++ */ ++ case 1: ++ if (*buf == (u8)(i % 63)) ++ continue; ++ break; ++ } ++ ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf); ++ usb_ep_set_halt (ep); ++ return -EINVAL; ++ } ++ return 0; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void zero_reset_config (struct zero_dev *dev) ++{ ++ if (dev->config == 0) ++ return; ++ ++ DBG (dev, "reset config\n"); ++ ++ /* just disable endpoints, forcing completion of pending i/o. ++ * all our completion handlers free their requests in this case. ++ */ ++ if (dev->in_ep) { ++ usb_ep_disable (dev->in_ep); ++ dev->in_ep = NULL; ++ } ++ if (dev->out_ep) { ++ usb_ep_disable (dev->out_ep); ++ dev->out_ep = NULL; ++ } ++ dev->config = 0; ++ del_timer (&dev->resume); ++} ++ ++#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos)) ++ ++static void ++zero_isoc_complete (struct usb_ep *ep, struct usb_request *req) ++{ ++ struct zero_dev *dev = ep->driver_data; ++ int status = req->status; ++ int i, j; ++ ++ switch (status) { ++ ++ case 0: /* normal completion? */ ++ //printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual); ++ for (i=0, j=rbuf_start; i<req->actual; i++) { ++ //printk ("%02x ", ((__u8*)req->buf)[i]); ++ rbuf[j] = ((__u8*)req->buf)[i]; ++ j++; ++ if (j >= RBUF_LEN) j=0; ++ } ++ rbuf_start = j; ++ //printk ("\n\n"); ++ ++ if (rbuf_len < RBUF_LEN) { ++ rbuf_len += req->actual; ++ if (rbuf_len > RBUF_LEN) { ++ rbuf_len = RBUF_LEN; ++ } ++ } ++ ++ break; ++ ++ /* this endpoint is normally active while we're configured */ ++ case -ECONNABORTED: /* hardware forced ep reset */ ++ case -ECONNRESET: /* request dequeued */ ++ case -ESHUTDOWN: /* disconnect from host */ ++ VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status, ++ req->actual, req->length); ++ if (ep == dev->out_ep) ++ check_read_data (dev, ep, req); ++ free_ep_req (ep, req); ++ return; ++ ++ case -EOVERFLOW: /* buffer overrun on read means that ++ * we didn't provide a big enough ++ * buffer. ++ */ ++ default: ++#if 1 ++ DBG (dev, "%s complete --> %d, %d/%d\n", ep->name, ++ status, req->actual, req->length); ++#endif ++ case -EREMOTEIO: /* short read */ ++ break; ++ } ++ ++ status = usb_ep_queue (ep, req, GFP_ATOMIC); ++ if (status) { ++ ERROR (dev, "kill %s: resubmit %d bytes --> %d\n", ++ ep->name, req->length, status); ++ usb_ep_set_halt (ep); ++ /* FIXME recover later ... somehow */ ++ } ++} ++ ++static struct usb_request * ++zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags) ++{ ++ struct usb_request *req; ++ int status; ++ ++ req = alloc_ep_req (ep, 512); ++ if (!req) ++ return NULL; ++ ++ req->complete = zero_isoc_complete; ++ ++ status = usb_ep_queue (ep, req, gfp_flags); ++ if (status) { ++ struct zero_dev *dev = ep->driver_data; ++ ++ ERROR (dev, "start %s --> %d\n", ep->name, status); ++ free_ep_req (ep, req); ++ req = NULL; ++ } ++ ++ return req; ++} ++ ++/* change our operational config. this code must agree with the code ++ * that returns config descriptors, and altsetting code. ++ * ++ * it's also responsible for power management interactions. some ++ * configurations might not work with our current power sources. ++ * ++ * note that some device controller hardware will constrain what this ++ * code can do, perhaps by disallowing more than one configuration or ++ * by limiting configuration choices (like the pxa2xx). ++ */ ++static int ++zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags) ++{ ++ int result = 0; ++ struct usb_gadget *gadget = dev->gadget; ++ const struct usb_endpoint_descriptor *d; ++ struct usb_ep *ep; ++ ++ if (number == dev->config) ++ return 0; ++ ++ zero_reset_config (dev); ++ ++ gadget_for_each_ep (ep, gadget) { ++ ++ if (strcmp (ep->name, "ep4") == 0) { ++ ++ d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6 ++ result = usb_ep_enable (ep, d); ++ ++ if (result == 0) { ++ ep->driver_data = dev; ++ dev->in_ep = ep; ++ ++ if (zero_start_isoc_ep (ep, gfp_flags) != 0) { ++ ++ dev->in_ep = ep; ++ continue; ++ } ++ ++ usb_ep_disable (ep); ++ result = -EIO; ++ } ++ } ++ ++ } ++ ++ dev->config = number; ++ return result; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req) ++{ ++ if (req->status || req->actual != req->length) ++ DBG ((struct zero_dev *) ep->driver_data, ++ "setup complete --> %d, %d/%d\n", ++ req->status, req->actual, req->length); ++} ++ ++/* ++ * The setup() callback implements all the ep0 functionality that's ++ * not handled lower down, in hardware or the hardware driver (like ++ * device and endpoint feature flags, and their status). It's all ++ * housekeeping for the gadget function we're implementing. Most of ++ * the work is in config-specific setup. ++ */ ++static int ++zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ struct usb_request *req = dev->req; ++ int value = -EOPNOTSUPP; ++ ++ /* usually this stores reply data in the pre-allocated ep0 buffer, ++ * but config change events will reconfigure hardware. ++ */ ++ req->zero = 0; ++ switch (ctrl->bRequest) { ++ ++ case USB_REQ_GET_DESCRIPTOR: ++ ++ switch (ctrl->wValue >> 8) { ++ ++ case USB_DT_DEVICE: ++ value = min (ctrl->wLength, (u16) sizeof device_desc); ++ memcpy (req->buf, &device_desc, value); ++ break; ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ case USB_DT_DEVICE_QUALIFIER: ++ if (!gadget->is_dualspeed) ++ break; ++ value = min (ctrl->wLength, (u16) sizeof dev_qualifier); ++ memcpy (req->buf, &dev_qualifier, value); ++ break; ++ ++ case USB_DT_OTHER_SPEED_CONFIG: ++ if (!gadget->is_dualspeed) ++ break; ++ // FALLTHROUGH ++#endif /* CONFIG_USB_GADGET_DUALSPEED */ ++ case USB_DT_CONFIG: ++ value = config_buf (gadget, req->buf, ++ ctrl->wValue >> 8, ++ ctrl->wValue & 0xff); ++ if (value >= 0) ++ value = min (ctrl->wLength, (u16) value); ++ break; ++ ++ case USB_DT_STRING: ++ /* wIndex == language code. ++ * this driver only handles one language, you can ++ * add string tables for other languages, using ++ * any UTF-8 characters ++ */ ++ value = usb_gadget_get_string (&stringtab, ++ ctrl->wValue & 0xff, req->buf); ++ if (value >= 0) { ++ value = min (ctrl->wLength, (u16) value); ++ } ++ break; ++ } ++ break; ++ ++ /* currently two configs, two speeds */ ++ case USB_REQ_SET_CONFIGURATION: ++ if (ctrl->bRequestType != 0) ++ goto unknown; ++ ++ spin_lock (&dev->lock); ++ value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC); ++ spin_unlock (&dev->lock); ++ break; ++ case USB_REQ_GET_CONFIGURATION: ++ if (ctrl->bRequestType != USB_DIR_IN) ++ goto unknown; ++ *(u8 *)req->buf = dev->config; ++ value = min (ctrl->wLength, (u16) 1); ++ break; ++ ++ /* until we add altsetting support, or other interfaces, ++ * only 0/0 are possible. pxa2xx only supports 0/0 (poorly) ++ * and already killed pending endpoint I/O. ++ */ ++ case USB_REQ_SET_INTERFACE: ++ ++ if (ctrl->bRequestType != USB_RECIP_INTERFACE) ++ goto unknown; ++ spin_lock (&dev->lock); ++ if (dev->config) { ++ u8 config = dev->config; ++ ++ /* resets interface configuration, forgets about ++ * previous transaction state (queued bufs, etc) ++ * and re-inits endpoint state (toggle etc) ++ * no response queued, just zero status == success. ++ * if we had more than one interface we couldn't ++ * use this "reset the config" shortcut. ++ */ ++ zero_reset_config (dev); ++ zero_set_config (dev, config, GFP_ATOMIC); ++ value = 0; ++ } ++ spin_unlock (&dev->lock); ++ break; ++ case USB_REQ_GET_INTERFACE: ++ if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) { ++ value = ctrl->wLength; ++ break; ++ } ++ else { ++ if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE)) ++ goto unknown; ++ if (!dev->config) ++ break; ++ if (ctrl->wIndex != 0) { ++ value = -EDOM; ++ break; ++ } ++ *(u8 *)req->buf = 0; ++ value = min (ctrl->wLength, (u16) 1); ++ } ++ break; ++ ++ /* ++ * These are the same vendor-specific requests supported by ++ * Intel's USB 2.0 compliance test devices. We exceed that ++ * device spec by allowing multiple-packet requests. ++ */ ++ case 0x5b: /* control WRITE test -- fill the buffer */ ++ if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR)) ++ goto unknown; ++ if (ctrl->wValue || ctrl->wIndex) ++ break; ++ /* just read that many bytes into the buffer */ ++ if (ctrl->wLength > USB_BUFSIZ) ++ break; ++ value = ctrl->wLength; ++ break; ++ case 0x5c: /* control READ test -- return the buffer */ ++ if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR)) ++ goto unknown; ++ if (ctrl->wValue || ctrl->wIndex) ++ break; ++ /* expect those bytes are still in the buffer; send back */ ++ if (ctrl->wLength > USB_BUFSIZ ++ || ctrl->wLength != req->length) ++ break; ++ value = ctrl->wLength; ++ break; ++ ++ case 0x01: // SET_CUR ++ case 0x02: ++ case 0x03: ++ case 0x04: ++ case 0x05: ++ value = ctrl->wLength; ++ break; ++ case 0x81: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0xe3; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x00; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x81; ++ //((u8*)req->buf)[1] = 0x81; ++ value = ctrl->wLength; ++ break; ++ case 0x82: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0xc3; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x00; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x82; ++ //((u8*)req->buf)[1] = 0x82; ++ value = ctrl->wLength; ++ break; ++ case 0x83: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0x00; ++ break; ++ case 0x0300: ++ ((u8*)req->buf)[0] = 0x60; ++ break; ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x18; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x83; ++ //((u8*)req->buf)[1] = 0x83; ++ value = ctrl->wLength; ++ break; ++ case 0x84: ++ switch (ctrl->wValue) { ++ case 0x0201: ++ case 0x0202: ++ ((u8*)req->buf)[0] = 0x00; ++ ((u8*)req->buf)[1] = 0x01; ++ break; ++ case 0x0300: ++ case 0x0500: ++ ((u8*)req->buf)[0] = 0x08; ++ break; ++ } ++ //((u8*)req->buf)[0] = 0x84; ++ //((u8*)req->buf)[1] = 0x84; ++ value = ctrl->wLength; ++ break; ++ case 0x85: ++ ((u8*)req->buf)[0] = 0x85; ++ ((u8*)req->buf)[1] = 0x85; ++ value = ctrl->wLength; ++ break; ++ ++ ++ default: ++unknown: ++ printk("unknown control req%02x.%02x v%04x i%04x l%d\n", ++ ctrl->bRequestType, ctrl->bRequest, ++ ctrl->wValue, ctrl->wIndex, ctrl->wLength); ++ } ++ ++ /* respond with data transfer before status phase? */ ++ if (value >= 0) { ++ req->length = value; ++ req->zero = value < ctrl->wLength ++ && (value % gadget->ep0->maxpacket) == 0; ++ value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); ++ if (value < 0) { ++ DBG (dev, "ep_queue < 0 --> %d\n", value); ++ req->status = 0; ++ zero_setup_complete (gadget->ep0, req); ++ } ++ } ++ ++ /* device either stalls (value < 0) or reports success */ ++ return value; ++} ++ ++static void ++zero_disconnect (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ unsigned long flags; ++ ++ spin_lock_irqsave (&dev->lock, flags); ++ zero_reset_config (dev); ++ ++ /* a more significant application might have some non-usb ++ * activities to quiesce here, saving resources like power ++ * or pushing the notification up a network stack. ++ */ ++ spin_unlock_irqrestore (&dev->lock, flags); ++ ++ /* next we may get setup() calls to enumerate new connections; ++ * or an unbind() during shutdown (including removing module). ++ */ ++} ++ ++static void ++zero_autoresume (unsigned long _dev) ++{ ++ struct zero_dev *dev = (struct zero_dev *) _dev; ++ int status; ++ ++ /* normally the host would be woken up for something ++ * more significant than just a timer firing... ++ */ ++ if (dev->gadget->speed != USB_SPEED_UNKNOWN) { ++ status = usb_gadget_wakeup (dev->gadget); ++ DBG (dev, "wakeup --> %d\n", status); ++ } ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void ++zero_unbind (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ DBG (dev, "unbind\n"); ++ ++ /* we've already been disconnected ... no i/o is active */ ++ if (dev->req) ++ free_ep_req (gadget->ep0, dev->req); ++ del_timer_sync (&dev->resume); ++ kfree (dev); ++ set_gadget_data (gadget, NULL); ++} ++ ++static int ++zero_bind (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev; ++ //struct usb_ep *ep; ++ ++ printk("binding\n"); ++ /* ++ * DRIVER POLICY CHOICE: you may want to do this differently. ++ * One thing to avoid is reusing a bcdDevice revision code ++ * with different host-visible configurations or behavior ++ * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc ++ */ ++ //device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201); ++ ++ ++ /* ok, we made sense of the hardware ... */ ++ dev = kmalloc (sizeof *dev, SLAB_KERNEL); ++ if (!dev) ++ return -ENOMEM; ++ memset (dev, 0, sizeof *dev); ++ spin_lock_init (&dev->lock); ++ dev->gadget = gadget; ++ set_gadget_data (gadget, dev); ++ ++ /* preallocate control response and buffer */ ++ dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL); ++ if (!dev->req) ++ goto enomem; ++ dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ, ++ &dev->req->dma, GFP_KERNEL); ++ if (!dev->req->buf) ++ goto enomem; ++ ++ dev->req->complete = zero_setup_complete; ++ ++ device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket; ++ ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ /* assume ep0 uses the same value for both speeds ... */ ++ dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0; ++ ++ /* and that all endpoints are dual-speed */ ++ //hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress; ++ //hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress; ++#endif ++ ++ usb_gadget_set_selfpowered (gadget); ++ ++ init_timer (&dev->resume); ++ dev->resume.function = zero_autoresume; ++ dev->resume.data = (unsigned long) dev; ++ ++ gadget->ep0->driver_data = dev; ++ ++ INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname); ++ INFO (dev, "using %s, OUT %s IN %s\n", gadget->name, ++ EP_OUT_NAME, EP_IN_NAME); ++ ++ snprintf (manufacturer, sizeof manufacturer, ++ UTS_SYSNAME " " UTS_RELEASE " with %s", ++ gadget->name); ++ ++ return 0; ++ ++enomem: ++ zero_unbind (gadget); ++ return -ENOMEM; ++} ++ ++/*-------------------------------------------------------------------------*/ ++ ++static void ++zero_suspend (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ if (gadget->speed == USB_SPEED_UNKNOWN) ++ return; ++ ++ if (autoresume) { ++ mod_timer (&dev->resume, jiffies + (HZ * autoresume)); ++ DBG (dev, "suspend, wakeup in %d seconds\n", autoresume); ++ } else ++ DBG (dev, "suspend\n"); ++} ++ ++static void ++zero_resume (struct usb_gadget *gadget) ++{ ++ struct zero_dev *dev = get_gadget_data (gadget); ++ ++ DBG (dev, "resume\n"); ++ del_timer (&dev->resume); ++} ++ ++ ++/*-------------------------------------------------------------------------*/ ++ ++static struct usb_gadget_driver zero_driver = { ++#ifdef CONFIG_USB_GADGET_DUALSPEED ++ .speed = USB_SPEED_HIGH, ++#else ++ .speed = USB_SPEED_FULL, ++#endif ++ .function = (char *) longname, ++ .bind = zero_bind, ++ .unbind = zero_unbind, ++ ++ .setup = zero_setup, ++ .disconnect = zero_disconnect, ++ ++ .suspend = zero_suspend, ++ .resume = zero_resume, ++ ++ .driver = { ++ .name = (char *) shortname, ++ // .shutdown = ... ++ // .suspend = ... ++ // .resume = ... ++ }, ++}; ++ ++MODULE_AUTHOR ("David Brownell"); ++MODULE_LICENSE ("Dual BSD/GPL"); ++ ++static struct proc_dir_entry *pdir, *pfile; ++ ++static int isoc_read_data (char *page, char **start, ++ off_t off, int count, ++ int *eof, void *data) ++{ ++ int i; ++ static int c = 0; ++ static int done = 0; ++ static int s = 0; ++ ++/* ++ printk ("\ncount: %d\n", count); ++ printk ("rbuf_start: %d\n", rbuf_start); ++ printk ("rbuf_len: %d\n", rbuf_len); ++ printk ("off: %d\n", off); ++ printk ("start: %p\n\n", *start); ++*/ ++ if (done) { ++ c = 0; ++ done = 0; ++ *eof = 1; ++ return 0; ++ } ++ ++ if (c == 0) { ++ if (rbuf_len == RBUF_LEN) ++ s = rbuf_start; ++ else s = 0; ++ } ++ ++ for (i=0; i<count && c<rbuf_len; i++, c++) { ++ page[i] = rbuf[(c+s) % RBUF_LEN]; ++ } ++ *start = page; ++ ++ if (c >= rbuf_len) { ++ *eof = 1; ++ done = 1; ++ } ++ ++ ++ return i; ++} ++ ++static int __init init (void) ++{ ++ ++ int retval = 0; ++ ++ pdir = proc_mkdir("isoc_test", NULL); ++ if(pdir == NULL) { ++ retval = -ENOMEM; ++ printk("Error creating dir\n"); ++ goto done; ++ } ++ pdir->owner = THIS_MODULE; ++ ++ pfile = create_proc_read_entry("isoc_data", ++ 0444, pdir, ++ isoc_read_data, ++ NULL); ++ if (pfile == NULL) { ++ retval = -ENOMEM; ++ printk("Error creating file\n"); ++ goto no_file; ++ } ++ pfile->owner = THIS_MODULE; ++ ++ return usb_gadget_register_driver (&zero_driver); ++ ++ no_file: ++ remove_proc_entry("isoc_data", NULL); ++ done: ++ return retval; ++} ++module_init (init); ++ ++static void __exit cleanup (void) ++{ ++ ++ usb_gadget_unregister_driver (&zero_driver); ++ ++ remove_proc_entry("isoc_data", pdir); ++ remove_proc_entry("isoc_test", NULL); ++} ++module_exit (cleanup); +diff --git a/drivers/usb/dwc_otg/dwc_otg_attr.c b/drivers/usb/dwc_otg/dwc_otg_attr.c +new file mode 100644 +index 0000000..8543537 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_attr.c +@@ -0,0 +1,966 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $ ++ * $Revision: 1.2 $ ++ * $Date: 2008-11-21 05:39:15 $ ++ * $Change: 1064918 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The diagnostic interface will provide access to the controller for ++ * bringing up the hardware and testing. The Linux driver attributes ++ * feature will be used to provide the Linux Diagnostic ++ * Interface. These attributes are accessed through sysfs. ++ */ ++ ++/** @page "Linux Module Attributes" ++ * ++ * The Linux module attributes feature is used to provide the Linux ++ * Diagnostic Interface. These attributes are accessed through sysfs. ++ * The diagnostic interface will provide access to the controller for ++ * bringing up the hardware and testing. ++ ++ ++ The following table shows the attributes. ++ <table> ++ <tr> ++ <td><b> Name</b></td> ++ <td><b> Description</b></td> ++ <td><b> Access</b></td> ++ </tr> ++ ++ <tr> ++ <td> mode </td> ++ <td> Returns the current mode: 0 for device mode, 1 for host mode</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> hnpcapable </td> ++ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register. ++ Read returns the current value.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> srpcapable </td> ++ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register. ++ Read returns the current value.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> hnp </td> ++ <td> Initiates the Host Negotiation Protocol. Read returns the status.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> srp </td> ++ <td> Initiates the Session Request Protocol. Read returns the status.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> buspower </td> ++ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> bussuspend </td> ++ <td> Suspends the USB bus.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> busconnected </td> ++ <td> Gets the connection status of the bus</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> gotgctl </td> ++ <td> Gets or sets the Core Control Status Register.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> gusbcfg </td> ++ <td> Gets or sets the Core USB Configuration Register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> grxfsiz </td> ++ <td> Gets or sets the Receive FIFO Size Register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> gnptxfsiz </td> ++ <td> Gets or sets the non-periodic Transmit Size Register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> gpvndctl </td> ++ <td> Gets or sets the PHY Vendor Control Register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> ggpio </td> ++ <td> Gets the value in the lower 16-bits of the General Purpose IO Register ++ or sets the upper 16 bits.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> guid </td> ++ <td> Gets or sets the value of the User ID Register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> gsnpsid </td> ++ <td> Gets the value of the Synopsys ID Regester</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> devspeed </td> ++ <td> Gets or sets the device speed setting in the DCFG register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> enumspeed </td> ++ <td> Gets the device enumeration Speed.</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> hptxfsiz </td> ++ <td> Gets the value of the Host Periodic Transmit FIFO</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> hprt0 </td> ++ <td> Gets or sets the value in the Host Port Control and Status Register</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> regoffset </td> ++ <td> Sets the register offset for the next Register Access</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> regvalue </td> ++ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> remote_wakeup </td> ++ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote ++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote ++ Wakeup signalling bit in the Device Control Register is set for 1 ++ milli-second.</td> ++ <td> Read/Write</td> ++ </tr> ++ ++ <tr> ++ <td> regdump </td> ++ <td> Dumps the contents of core registers.</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> spramdump </td> ++ <td> Dumps the contents of core registers.</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> hcddump </td> ++ <td> Dumps the current HCD state.</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> hcd_frrem </td> ++ <td> Shows the average value of the Frame Remaining ++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt ++ occurs. This can be used to determine the average interrupt latency. Also ++ shows the average Frame Remaining value for start_transfer and the "a" and ++ "b" sample points. The "a" and "b" sample points may be used during debugging ++ bto determine how long it takes to execute a section of the HCD code.</td> ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> rd_reg_test </td> ++ <td> Displays the time required to read the GNPTXFSIZ register many times ++ (the output shows the number of times the register is read). ++ <td> Read</td> ++ </tr> ++ ++ <tr> ++ <td> wr_reg_test </td> ++ <td> Displays the time required to write the GNPTXFSIZ register many times ++ (the output shows the number of times the register is written). ++ <td> Read</td> ++ </tr> ++ ++ </table> ++ ++ Example usage: ++ To get the current mode: ++ cat /sys/devices/lm0/mode ++ ++ To power down the USB: ++ echo 0 > /sys/devices/lm0/buspower ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/errno.h> ++#include <linux/types.h> ++#include <linux/stat.h> /* permission constants */ ++#include <linux/version.h> ++ ++#include <asm/io.h> ++ ++#include "linux/dwc_otg_plat.h" ++#include "dwc_otg_attr.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_pcd.h" ++#include "dwc_otg_hcd.h" ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++/* ++ * MACROs for defining sysfs attribute ++ */ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val; \ ++ val = dwc_read_reg32 (_addr_); \ ++ val = (val & (_mask_)) >> _shift_; \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ uint32_t clear = set; \ ++ clear = ((~clear) << _shift_) & _mask_; \ ++ set = (set << _shift_) & _mask_; \ ++ dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \ ++ dwc_modify_reg32(_addr_, clear, set); \ ++ return count; \ ++} ++ ++/* ++ * MACROs for defining sysfs attribute for 32-bit registers ++ */ ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val; \ ++ val = dwc_read_reg32 (_addr_); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \ ++ const char *buf, size_t count) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); \ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \ ++ dwc_write_reg32(_addr_, val); \ ++ return count; \ ++} ++ ++#else ++ ++/* ++ * MACROs for defining sysfs attribute ++ */ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\ ++ uint32_t val; \ ++ val = dwc_read_reg32 (_addr_); \ ++ val = (val & (_mask_)) >> _shift_; \ ++ return sprintf (buf, "%s = 0x%x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\ ++ uint32_t set = simple_strtoul(buf, NULL, 16); \ ++ uint32_t clear = set; \ ++ clear = ((~clear) << _shift_) & _mask_; \ ++ set = (set << _shift_) & _mask_; \ ++ dev_dbg(_dev, "Storing Address=0x%08x Set=0x%08x Clear=0x%08x\n", (uint32_t)_addr_, set, clear); \ ++ dwc_modify_reg32(_addr_, clear, set); \ ++ return count; \ ++} ++ ++/* ++ * MACROs for defining sysfs attribute for 32-bit registers ++ */ ++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \ ++static ssize_t _otg_attr_name_##_show (struct device *_dev, char *buf) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\ ++ uint32_t val; \ ++ val = dwc_read_reg32 (_addr_); \ ++ return sprintf (buf, "%s = 0x%08x\n", _string_, val); \ ++} ++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \ ++static ssize_t _otg_attr_name_##_store (struct device *_dev, const char *buf, size_t count) \ ++{ \ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);\ ++ uint32_t val = simple_strtoul(buf, NULL, 16); \ ++ dev_dbg(_dev, "Storing Address=0x%08x Val=0x%08x\n", (uint32_t)_addr_, val); \ ++ dwc_write_reg32(_addr_, val); \ ++ return count; \ ++} ++ ++#endif ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); ++ ++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ ++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_addr_,_mask_,_shift_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); ++ ++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_addr_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store); ++ ++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \ ++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_addr_,_string_) \ ++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL); ++ ++ ++/** @name Functions for Show/Store of Attributes */ ++/**@{*/ ++ ++/** ++ * Show the register offset of the Register Access. ++ */ ++static ssize_t regoffset_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ return snprintf(buf, sizeof("0xFFFFFFFF\n")+1,"0x%08x\n", otg_dev->reg_offset); ++} ++ ++/** ++ * Set the register offset for the next Register Access Read/Write ++ */ ++static ssize_t regoffset_store( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ const char *buf, ++ size_t count ) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ uint32_t offset = simple_strtoul(buf, NULL, 16); ++ //dev_dbg(_dev, "Offset=0x%08x\n", offset); ++ if (offset < 0x00040000 ) { ++ otg_dev->reg_offset = offset; ++ } ++ else { ++ dev_err( _dev, "invalid offset\n" ); ++ } ++ ++ return count; ++} ++DEVICE_ATTR(regoffset, S_IRUGO|S_IWUSR, (void *)regoffset_show, regoffset_store); ++ ++ ++/** ++ * Show the value of the register at the offset in the reg_offset ++ * attribute. ++ */ ++static ssize_t regvalue_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ uint32_t val; ++ volatile uint32_t *addr; ++ ++ if (otg_dev->reg_offset != 0xFFFFFFFF && ++ 0 != otg_dev->base) { ++ /* Calculate the address */ ++ addr = (uint32_t*)(otg_dev->reg_offset + ++ (uint8_t*)otg_dev->base); ++ //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr); ++ val = dwc_read_reg32( addr ); ++ return snprintf(buf, sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n")+1, ++ "Reg@0x%06x = 0x%08x\n", ++ otg_dev->reg_offset, val); ++ } ++ else { ++ dev_err(_dev, "Invalid offset (0x%0x)\n", ++ otg_dev->reg_offset); ++ return sprintf(buf, "invalid offset\n" ); ++ } ++} ++ ++/** ++ * Store the value in the register at the offset in the reg_offset ++ * attribute. ++ * ++ */ ++static ssize_t regvalue_store( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ const char *buf, ++ size_t count ) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ volatile uint32_t * addr; ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ //dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val); ++ if (otg_dev->reg_offset != 0xFFFFFFFF && 0 != otg_dev->base) { ++ /* Calculate the address */ ++ addr = (uint32_t*)(otg_dev->reg_offset + ++ (uint8_t*)otg_dev->base); ++ //dev_dbg(_dev, "@0x%08x\n", (unsigned)addr); ++ dwc_write_reg32( addr, val ); ++ } ++ else { ++ dev_err(_dev, "Invalid Register Offset (0x%08x)\n", ++ otg_dev->reg_offset); ++ } ++ return count; ++} ++DEVICE_ATTR(regvalue, S_IRUGO|S_IWUSR, regvalue_show, regvalue_store); ++ ++/* ++ * Attributes ++ */ ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<20),20,"Mode"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<9),9,"Mode"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable,&(otg_dev->core_if->core_global_regs->gusbcfg),(1<<8),8,"Mode"); ++ ++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); ++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected,otg_dev->core_if->host_if->hprt0,0x01,0,"Bus Connected"); ++ ++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl,&(otg_dev->core_if->core_global_regs->gotgctl),"GOTGCTL"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,&(otg_dev->core_if->core_global_regs->gusbcfg),"GUSBCFG"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,&(otg_dev->core_if->core_global_regs->grxfsiz),"GRXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,&(otg_dev->core_if->core_global_regs->gnptxfsiz),"GNPTXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,&(otg_dev->core_if->core_global_regs->gpvndctl),"GPVNDCTL"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,&(otg_dev->core_if->core_global_regs->ggpio),"GGPIO"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(guid,&(otg_dev->core_if->core_global_regs->guid),"GUID"); ++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,&(otg_dev->core_if->core_global_regs->gsnpsid),"GSNPSID"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dcfg),0x3,0,"Device Speed"); ++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed,&(otg_dev->core_if->dev_if->dev_global_regs->dsts),0x6,1,"Device Enumeration Speed"); ++ ++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,&(otg_dev->core_if->core_global_regs->hptxfsiz),"HPTXFSIZ"); ++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0,otg_dev->core_if->host_if->hprt0,"HPRT0"); ++ ++ ++/** ++ * @todo Add code to initiate the HNP. ++ */ ++/** ++ * Show the HNP status bit ++ */ ++static ssize_t hnp_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ gotgctl_data_t val; ++ val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl)); ++ return sprintf (buf, "HstNegScs = 0x%x\n", val.b.hstnegscs); ++} ++ ++/** ++ * Set the HNP Request bit ++ */ ++static ssize_t hnp_store( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ const char *buf, ++ size_t count ) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ uint32_t *addr = (uint32_t *)&(otg_dev->core_if->core_global_regs->gotgctl); ++ gotgctl_data_t mem; ++ mem.d32 = dwc_read_reg32(addr); ++ mem.b.hnpreq = in; ++ dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32); ++ dwc_write_reg32(addr, mem.d32); ++ return count; ++} ++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store); ++ ++/** ++ * @todo Add code to initiate the SRP. ++ */ ++/** ++ * Show the SRP status bit ++ */ ++static ssize_t srp_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ gotgctl_data_t val; ++ val.d32 = dwc_read_reg32 (&(otg_dev->core_if->core_global_regs->gotgctl)); ++ return sprintf (buf, "SesReqScs = 0x%x\n", val.b.sesreqscs); ++#else ++ return sprintf(buf, "Host Only Mode!\n"); ++#endif ++} ++ ++ ++ ++/** ++ * Set the SRP Request bit ++ */ ++static ssize_t srp_store( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ const char *buf, ++ size_t count ) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ dwc_otg_pcd_initiate_srp(otg_dev->pcd); ++#endif ++ return count; ++} ++DEVICE_ATTR(srp, 0644, srp_show, srp_store); ++ ++/** ++ * @todo Need to do more for power on/off? ++ */ ++/** ++ * Show the Bus Power status ++ */ ++static ssize_t buspower_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ hprt0_data_t val; ++ val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0); ++ return sprintf (buf, "Bus Power = 0x%x\n", val.b.prtpwr); ++} ++ ++ ++/** ++ * Set the Bus Power status ++ */ ++static ssize_t buspower_store( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ const char *buf, ++ size_t count ) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ uint32_t on = simple_strtoul(buf, NULL, 16); ++ uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0; ++ hprt0_data_t mem; ++ ++ mem.d32 = dwc_read_reg32(addr); ++ mem.b.prtpwr = on; ++ ++ //dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32); ++ dwc_write_reg32(addr, mem.d32); ++ ++ return count; ++} ++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store); ++ ++/** ++ * @todo Need to do more for suspend? ++ */ ++/** ++ * Show the Bus Suspend status ++ */ ++static ssize_t bussuspend_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ hprt0_data_t val; ++ val.d32 = dwc_read_reg32 (otg_dev->core_if->host_if->hprt0); ++ return sprintf (buf, "Bus Suspend = 0x%x\n", val.b.prtsusp); ++} ++ ++/** ++ * Set the Bus Suspend status ++ */ ++static ssize_t bussuspend_store( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ const char *buf, ++ size_t count ) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ uint32_t in = simple_strtoul(buf, NULL, 16); ++ uint32_t *addr = (uint32_t *)otg_dev->core_if->host_if->hprt0; ++ hprt0_data_t mem; ++ mem.d32 = dwc_read_reg32(addr); ++ mem.b.prtsusp = in; ++ dev_dbg(_dev, "Storing Address=0x%08x Data=0x%08x\n", (uint32_t)addr, mem.d32); ++ dwc_write_reg32(addr, mem.d32); ++ return count; ++} ++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store); ++ ++/** ++ * Show the status of Remote Wakeup. ++ */ ++static ssize_t remote_wakeup_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ dctl_data_t val; ++ val.d32 = ++ dwc_read_reg32( &otg_dev->core_if->dev_if->dev_global_regs->dctl); ++ return sprintf( buf, "Remote Wakeup = %d Enabled = %d\n", ++ val.b.rmtwkupsig, otg_dev->pcd->remote_wakeup_enable); ++#else ++ return sprintf(buf, "Host Only Mode!\n"); ++#endif ++} ++/** ++ * Initiate a remote wakeup of the host. The Device control register ++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable ++ * flag is set. ++ * ++ */ ++static ssize_t remote_wakeup_store( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ const char *buf, ++ size_t count ) ++{ ++#ifndef DWC_HOST_ONLY ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ uint32_t val = simple_strtoul(buf, NULL, 16); ++ if (val&1) { ++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1); ++ } ++ else { ++ dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0); ++ } ++#endif ++ return count; ++} ++DEVICE_ATTR(remote_wakeup, S_IRUGO|S_IWUSR, remote_wakeup_show, ++ remote_wakeup_store); ++ ++/** ++ * Dump global registers and either host or device registers (depending on the ++ * current mode of the core). ++ */ ++static ssize_t regdump_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ dwc_otg_dump_global_registers( otg_dev->core_if); ++ if (dwc_otg_is_host_mode(otg_dev->core_if)) { ++ dwc_otg_dump_host_registers( otg_dev->core_if); ++ } else { ++ dwc_otg_dump_dev_registers( otg_dev->core_if); ++ ++ } ++ return sprintf( buf, "Register Dump\n" ); ++} ++ ++DEVICE_ATTR(regdump, S_IRUGO|S_IWUSR, regdump_show, 0); ++ ++/** ++ * Dump global registers and either host or device registers (depending on the ++ * current mode of the core). ++ */ ++static ssize_t spramdump_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ dwc_otg_dump_spram( otg_dev->core_if); ++ ++ return sprintf( buf, "SPRAM Dump\n" ); ++} ++ ++DEVICE_ATTR(spramdump, S_IRUGO|S_IWUSR, spramdump_show, 0); ++ ++/** ++ * Dump the current hcd state. ++ */ ++static ssize_t hcddump_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++#ifndef DWC_DEVICE_ONLY ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ dwc_otg_hcd_dump_state(otg_dev->hcd); ++#endif ++ return sprintf( buf, "HCD Dump\n" ); ++} ++ ++DEVICE_ATTR(hcddump, S_IRUGO|S_IWUSR, hcddump_show, 0); ++ ++/** ++ * Dump the average frame remaining at SOF. This can be used to ++ * determine average interrupt latency. Frame remaining is also shown for ++ * start transfer and two additional sample points. ++ */ ++static ssize_t hcd_frrem_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++#ifndef DWC_DEVICE_ONLY ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ dwc_otg_hcd_dump_frrem(otg_dev->hcd); ++#endif ++ return sprintf( buf, "HCD Dump Frame Remaining\n" ); ++} ++ ++DEVICE_ATTR(hcd_frrem, S_IRUGO|S_IWUSR, hcd_frrem_show, 0); ++ ++/** ++ * Displays the time required to read the GNPTXFSIZ register many times (the ++ * output shows the number of times the register is read). ++ */ ++#define RW_REG_COUNT 10000000 ++#define MSEC_PER_JIFFIE 1000/HZ ++static ssize_t rd_reg_test_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ int i; ++ int time; ++ int start_jiffies; ++ ++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", ++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); ++ start_jiffies = jiffies; ++ for (i = 0; i < RW_REG_COUNT; i++) { ++ dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz); ++ } ++ time = jiffies - start_jiffies; ++ return sprintf( buf, "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", ++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time ); ++} ++ ++DEVICE_ATTR(rd_reg_test, S_IRUGO|S_IWUSR, rd_reg_test_show, 0); ++ ++/** ++ * Displays the time required to write the GNPTXFSIZ register many times (the ++ * output shows the number of times the register is written). ++ */ ++static ssize_t wr_reg_test_show( struct device *_dev, ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct device_attribute *attr, ++#endif ++ char *buf) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev); ++ ++ uint32_t reg_val; ++ int i; ++ int time; ++ int start_jiffies; ++ ++ printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n", ++ HZ, MSEC_PER_JIFFIE, loops_per_jiffy); ++ reg_val = dwc_read_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz); ++ start_jiffies = jiffies; ++ for (i = 0; i < RW_REG_COUNT; i++) { ++ dwc_write_reg32(&otg_dev->core_if->core_global_regs->gnptxfsiz, reg_val); ++ } ++ time = jiffies - start_jiffies; ++ return sprintf( buf, "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n", ++ RW_REG_COUNT, time * MSEC_PER_JIFFIE, time); ++} ++ ++DEVICE_ATTR(wr_reg_test, S_IRUGO|S_IWUSR, wr_reg_test_show, 0); ++/**@}*/ ++ ++/** ++ * Create the device files ++ */ ++void dwc_otg_attr_create (struct device *dev) ++{ ++ int error; ++ ++ error = device_create_file(dev, &dev_attr_regoffset); ++ error = device_create_file(dev, &dev_attr_regvalue); ++ error = device_create_file(dev, &dev_attr_mode); ++ error = device_create_file(dev, &dev_attr_hnpcapable); ++ error = device_create_file(dev, &dev_attr_srpcapable); ++ error = device_create_file(dev, &dev_attr_hnp); ++ error = device_create_file(dev, &dev_attr_srp); ++ error = device_create_file(dev, &dev_attr_buspower); ++ error = device_create_file(dev, &dev_attr_bussuspend); ++ error = device_create_file(dev, &dev_attr_busconnected); ++ error = device_create_file(dev, &dev_attr_gotgctl); ++ error = device_create_file(dev, &dev_attr_gusbcfg); ++ error = device_create_file(dev, &dev_attr_grxfsiz); ++ error = device_create_file(dev, &dev_attr_gnptxfsiz); ++ error = device_create_file(dev, &dev_attr_gpvndctl); ++ error = device_create_file(dev, &dev_attr_ggpio); ++ error = device_create_file(dev, &dev_attr_guid); ++ error = device_create_file(dev, &dev_attr_gsnpsid); ++ error = device_create_file(dev, &dev_attr_devspeed); ++ error = device_create_file(dev, &dev_attr_enumspeed); ++ error = device_create_file(dev, &dev_attr_hptxfsiz); ++ error = device_create_file(dev, &dev_attr_hprt0); ++ error = device_create_file(dev, &dev_attr_remote_wakeup); ++ error = device_create_file(dev, &dev_attr_regdump); ++ error = device_create_file(dev, &dev_attr_spramdump); ++ error = device_create_file(dev, &dev_attr_hcddump); ++ error = device_create_file(dev, &dev_attr_hcd_frrem); ++ error = device_create_file(dev, &dev_attr_rd_reg_test); ++ error = device_create_file(dev, &dev_attr_wr_reg_test); ++} ++ ++/** ++ * Remove the device files ++ */ ++void dwc_otg_attr_remove (struct device *dev) ++{ ++ device_remove_file(dev, &dev_attr_regoffset); ++ device_remove_file(dev, &dev_attr_regvalue); ++ device_remove_file(dev, &dev_attr_mode); ++ device_remove_file(dev, &dev_attr_hnpcapable); ++ device_remove_file(dev, &dev_attr_srpcapable); ++ device_remove_file(dev, &dev_attr_hnp); ++ device_remove_file(dev, &dev_attr_srp); ++ device_remove_file(dev, &dev_attr_buspower); ++ device_remove_file(dev, &dev_attr_bussuspend); ++ device_remove_file(dev, &dev_attr_busconnected); ++ device_remove_file(dev, &dev_attr_gotgctl); ++ device_remove_file(dev, &dev_attr_gusbcfg); ++ device_remove_file(dev, &dev_attr_grxfsiz); ++ device_remove_file(dev, &dev_attr_gnptxfsiz); ++ device_remove_file(dev, &dev_attr_gpvndctl); ++ device_remove_file(dev, &dev_attr_ggpio); ++ device_remove_file(dev, &dev_attr_guid); ++ device_remove_file(dev, &dev_attr_gsnpsid); ++ device_remove_file(dev, &dev_attr_devspeed); ++ device_remove_file(dev, &dev_attr_enumspeed); ++ device_remove_file(dev, &dev_attr_hptxfsiz); ++ device_remove_file(dev, &dev_attr_hprt0); ++ device_remove_file(dev, &dev_attr_remote_wakeup); ++ device_remove_file(dev, &dev_attr_regdump); ++ device_remove_file(dev, &dev_attr_spramdump); ++ device_remove_file(dev, &dev_attr_hcddump); ++ device_remove_file(dev, &dev_attr_hcd_frrem); ++ device_remove_file(dev, &dev_attr_rd_reg_test); ++ device_remove_file(dev, &dev_attr_wr_reg_test); ++} +diff --git a/drivers/usb/dwc_otg/dwc_otg_attr.h b/drivers/usb/dwc_otg/dwc_otg_attr.h +new file mode 100644 +index 0000000..0862b27 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_attr.h +@@ -0,0 +1,67 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $ ++ * $Revision: 1.2 $ ++ * $Date: 2008-11-21 05:39:15 $ ++ * $Change: 477051 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_OTG_ATTR_H__) ++#define __DWC_OTG_ATTR_H__ ++ ++/** @file ++ * This file contains the interface to the Linux device attributes. ++ */ ++extern struct device_attribute dev_attr_regoffset; ++extern struct device_attribute dev_attr_regvalue; ++ ++extern struct device_attribute dev_attr_mode; ++extern struct device_attribute dev_attr_hnpcapable; ++extern struct device_attribute dev_attr_srpcapable; ++extern struct device_attribute dev_attr_hnp; ++extern struct device_attribute dev_attr_srp; ++extern struct device_attribute dev_attr_buspower; ++extern struct device_attribute dev_attr_bussuspend; ++extern struct device_attribute dev_attr_busconnected; ++extern struct device_attribute dev_attr_gotgctl; ++extern struct device_attribute dev_attr_gusbcfg; ++extern struct device_attribute dev_attr_grxfsiz; ++extern struct device_attribute dev_attr_gnptxfsiz; ++extern struct device_attribute dev_attr_gpvndctl; ++extern struct device_attribute dev_attr_ggpio; ++extern struct device_attribute dev_attr_guid; ++extern struct device_attribute dev_attr_gsnpsid; ++extern struct device_attribute dev_attr_devspeed; ++extern struct device_attribute dev_attr_enumspeed; ++extern struct device_attribute dev_attr_hptxfsiz; ++extern struct device_attribute dev_attr_hprt0; ++ ++void dwc_otg_attr_create (struct device *dev); ++void dwc_otg_attr_remove (struct device *dev); ++ ++#endif +diff --git a/drivers/usb/dwc_otg/dwc_otg_cil.c b/drivers/usb/dwc_otg/dwc_otg_cil.c +new file mode 100644 +index 0000000..89aa83e +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_cil.c +@@ -0,0 +1,3692 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $ ++ * $Revision: 1.7 $ ++ * $Date: 2008-12-22 11:43:05 $ ++ * $Change: 1117667 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The Core Interface Layer provides basic services for accessing and ++ * managing the DWC_otg hardware. These services are used by both the ++ * Host Controller Driver and the Peripheral Controller Driver. ++ * ++ * The CIL manages the memory map for the core so that the HCD and PCD ++ * don't have to do this separately. It also handles basic tasks like ++ * reading/writing the registers and data FIFOs in the controller. ++ * Some of the data access functions provide encapsulation of several ++ * operations required to perform a task, such as writing multiple ++ * registers to start a transfer. Finally, the CIL performs basic ++ * services that are not specific to either the host or device modes ++ * of operation. These services include management of the OTG Host ++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A ++ * Diagnostic API is also provided to allow testing of the controller ++ * hardware. ++ * ++ * The Core Interface Layer has the following requirements: ++ * - Provides basic controller operations. ++ * - Minimal use of OS services. ++ * - The OS services used will be abstracted by using inline functions ++ * or macros. ++ * ++ */ ++#include <asm/unaligned.h> ++#include <linux/dma-mapping.h> ++#ifdef DEBUG ++#include <linux/jiffies.h> ++#endif ++ ++#include "linux/dwc_otg_plat.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++ ++/* Included only to access hc->qh for non-dword buffer handling ++ * TODO: account it ++ */ ++#include "dwc_otg_hcd.h" ++ ++/** ++ * This function is called to initialize the DWC_otg CSR data ++ * structures. The register addresses in the device and host ++ * structures are initialized from the base address supplied by the ++ * caller. The calling function must make the OS calls to get the ++ * base address of the DWC_otg controller registers. The core_params ++ * argument holds the parameters that specify how the core should be ++ * configured. ++ * ++ * @param[in] reg_base_addr Base address of DWC_otg core registers ++ * @param[in] core_params Pointer to the core configuration parameters ++ * ++ */ ++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *reg_base_addr, ++ dwc_otg_core_params_t *core_params) ++{ ++ dwc_otg_core_if_t *core_if = 0; ++ dwc_otg_dev_if_t *dev_if = 0; ++ dwc_otg_host_if_t *host_if = 0; ++ uint8_t *reg_base = (uint8_t *)reg_base_addr; ++ int i = 0; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s(%p,%p)\n", __func__, reg_base_addr, core_params); ++ ++ core_if = kmalloc(sizeof(dwc_otg_core_if_t), GFP_KERNEL); ++ ++ if (core_if == 0) { ++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_core_if_t failed\n"); ++ return 0; ++ } ++ ++ memset(core_if, 0, sizeof(dwc_otg_core_if_t)); ++ ++ core_if->core_params = core_params; ++ core_if->core_global_regs = (dwc_otg_core_global_regs_t *)reg_base; ++ ++ /* ++ * Allocate the Device Mode structures. ++ */ ++ dev_if = kmalloc(sizeof(dwc_otg_dev_if_t), GFP_KERNEL); ++ ++ if (dev_if == 0) { ++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n"); ++ kfree(core_if); ++ return 0; ++ } ++ ++ dev_if->dev_global_regs = ++ (dwc_otg_device_global_regs_t *)(reg_base + DWC_DEV_GLOBAL_REG_OFFSET); ++ ++ for (i=0; i<MAX_EPS_CHANNELS; i++) ++ { ++ dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *) ++ (reg_base + DWC_DEV_IN_EP_REG_OFFSET + ++ (i * DWC_EP_REG_OFFSET)); ++ ++ dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *) ++ (reg_base + DWC_DEV_OUT_EP_REG_OFFSET + ++ (i * DWC_EP_REG_OFFSET)); ++ DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n", ++ i, &dev_if->in_ep_regs[i]->diepctl); ++ DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n", ++ i, &dev_if->out_ep_regs[i]->doepctl); ++ } ++ ++ dev_if->speed = 0; // unknown ++ ++ core_if->dev_if = dev_if; ++ ++ /* ++ * Allocate the Host Mode structures. ++ */ ++ host_if = kmalloc(sizeof(dwc_otg_host_if_t), GFP_KERNEL); ++ ++ if (host_if == 0) { ++ DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_host_if_t failed\n"); ++ kfree(dev_if); ++ kfree(core_if); ++ return 0; ++ } ++ ++ host_if->host_global_regs = (dwc_otg_host_global_regs_t *) ++ (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET); ++ ++ host_if->hprt0 = (uint32_t*)(reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET); ++ ++ for (i=0; i<MAX_EPS_CHANNELS; i++) ++ { ++ host_if->hc_regs[i] = (dwc_otg_hc_regs_t *) ++ (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET + ++ (i * DWC_OTG_CHAN_REGS_OFFSET)); ++ DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n", ++ i, &host_if->hc_regs[i]->hcchar); ++ } ++ ++ host_if->num_host_channels = MAX_EPS_CHANNELS; ++ core_if->host_if = host_if; ++ ++ for (i=0; i<MAX_EPS_CHANNELS; i++) ++ { ++ core_if->data_fifo[i] = ++ (uint32_t *)(reg_base + DWC_OTG_DATA_FIFO_OFFSET + ++ (i * DWC_OTG_DATA_FIFO_SIZE)); ++ DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08x\n", ++ i, (unsigned)core_if->data_fifo[i]); ++ } ++ ++ core_if->pcgcctl = (uint32_t*)(reg_base + DWC_OTG_PCGCCTL_OFFSET); ++ ++ /* ++ * Store the contents of the hardware configuration registers here for ++ * easy access later. ++ */ ++ core_if->hwcfg1.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg1); ++ core_if->hwcfg2.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg2); ++ core_if->hwcfg3.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg3); ++ core_if->hwcfg4.d32 = dwc_read_reg32(&core_if->core_global_regs->ghwcfg4); ++ ++ DWC_DEBUGPL(DBG_CILV,"hwcfg1=%08x\n",core_if->hwcfg1.d32); ++ DWC_DEBUGPL(DBG_CILV,"hwcfg2=%08x\n",core_if->hwcfg2.d32); ++ DWC_DEBUGPL(DBG_CILV,"hwcfg3=%08x\n",core_if->hwcfg3.d32); ++ DWC_DEBUGPL(DBG_CILV,"hwcfg4=%08x\n",core_if->hwcfg4.d32); ++ ++ core_if->hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg); ++ core_if->dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg); ++ ++ DWC_DEBUGPL(DBG_CILV,"hcfg=%08x\n",core_if->hcfg.d32); ++ DWC_DEBUGPL(DBG_CILV,"dcfg=%08x\n",core_if->dcfg.d32); ++ ++ DWC_DEBUGPL(DBG_CILV,"op_mode=%0x\n",core_if->hwcfg2.b.op_mode); ++ DWC_DEBUGPL(DBG_CILV,"arch=%0x\n",core_if->hwcfg2.b.architecture); ++ DWC_DEBUGPL(DBG_CILV,"num_dev_ep=%d\n",core_if->hwcfg2.b.num_dev_ep); ++ DWC_DEBUGPL(DBG_CILV,"num_host_chan=%d\n",core_if->hwcfg2.b.num_host_chan); ++ DWC_DEBUGPL(DBG_CILV,"nonperio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.nonperio_tx_q_depth); ++ DWC_DEBUGPL(DBG_CILV,"host_perio_tx_q_depth=0x%0x\n",core_if->hwcfg2.b.host_perio_tx_q_depth); ++ DWC_DEBUGPL(DBG_CILV,"dev_token_q_depth=0x%0x\n",core_if->hwcfg2.b.dev_token_q_depth); ++ ++ DWC_DEBUGPL(DBG_CILV,"Total FIFO SZ=%d\n", core_if->hwcfg3.b.dfifo_depth); ++ DWC_DEBUGPL(DBG_CILV,"xfer_size_cntr_width=%0x\n", core_if->hwcfg3.b.xfer_size_cntr_width); ++ ++ /* ++ * Set the SRP sucess bit for FS-I2c ++ */ ++ core_if->srp_success = 0; ++ core_if->srp_timer_started = 0; ++ ++ ++ /* ++ * Create new workqueue and init works ++ */ ++ core_if->wq_otg = create_singlethread_workqueue("dwc_otg"); ++ if(core_if->wq_otg == 0) { ++ DWC_DEBUGPL(DBG_CIL, "Creation of wq_otg failed\n"); ++ kfree(host_if); ++ kfree(dev_if); ++ kfree(core_if); ++ return 0 * HZ; ++ } ++ ++ ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ ++ INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change, core_if); ++ INIT_WORK(&core_if->w_wkp, w_wakeup_detected, core_if); ++ ++#else ++ ++ INIT_WORK(&core_if->w_conn_id, w_conn_id_status_change); ++ INIT_DELAYED_WORK(&core_if->w_wkp, w_wakeup_detected); ++ ++#endif ++ return core_if; ++} ++ ++/** ++ * This function frees the structures allocated by dwc_otg_cil_init(). ++ * ++ * @param[in] core_if The core interface pointer returned from ++ * dwc_otg_cil_init(). ++ * ++ */ ++void dwc_otg_cil_remove(dwc_otg_core_if_t *core_if) ++{ ++ /* Disable all interrupts */ ++ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 1, 0); ++ dwc_write_reg32(&core_if->core_global_regs->gintmsk, 0); ++ ++ if (core_if->wq_otg) { ++ destroy_workqueue(core_if->wq_otg); ++ } ++ if (core_if->dev_if) { ++ kfree(core_if->dev_if); ++ } ++ if (core_if->host_if) { ++ kfree(core_if->host_if); ++ } ++ kfree(core_if); ++} ++ ++/** ++ * This function enables the controller's Global Interrupt in the AHB Config ++ * register. ++ * ++ * @param[in] core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t *core_if) ++{ ++ gahbcfg_data_t ahbcfg = { .d32 = 0}; ++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ ++ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32); ++} ++ ++/** ++ * This function disables the controller's Global Interrupt in the AHB Config ++ * register. ++ * ++ * @param[in] core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t *core_if) ++{ ++ gahbcfg_data_t ahbcfg = { .d32 = 0}; ++ ahbcfg.b.glblintrmsk = 1; /* Enable interrupts */ ++ dwc_modify_reg32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0); ++} ++ ++/** ++ * This function initializes the commmon interrupts, used in both ++ * device and host modes. ++ * ++ * @param[in] core_if Programming view of the DWC_otg controller ++ * ++ */ ++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t *core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = ++ core_if->core_global_regs; ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ ++ /* Clear any pending OTG Interrupts */ ++ dwc_write_reg32(&global_regs->gotgint, 0xFFFFFFFF); ++ ++ /* Clear any pending interrupts */ ++ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* ++ * Enable the interrupts in the GINTMSK. ++ */ ++ intr_mask.b.modemismatch = 1; ++ intr_mask.b.otgintr = 1; ++ ++ if (!core_if->dma_enable) { ++ intr_mask.b.rxstsqlvl = 1; ++ } ++ ++ intr_mask.b.conidstschng = 1; ++ intr_mask.b.wkupintr = 1; ++ intr_mask.b.disconnect = 1; ++ intr_mask.b.usbsuspend = 1; ++ intr_mask.b.sessreqintr = 1; ++ dwc_write_reg32(&global_regs->gintmsk, intr_mask.d32); ++} ++ ++/** ++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY ++ * type. ++ */ ++static void init_fslspclksel(dwc_otg_core_if_t *core_if) ++{ ++ uint32_t val; ++ hcfg_data_t hcfg; ++ ++ if (((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) || ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* Full speed PHY */ ++ val = DWC_HCFG_48_MHZ; ++ } ++ else { ++ /* High speed PHY running at full speed or high speed */ ++ val = DWC_HCFG_30_60_MHZ; ++ } ++ ++ DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val); ++ hcfg.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hcfg); ++ hcfg.b.fslspclksel = val; ++ dwc_write_reg32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32); ++} ++ ++/** ++ * Initializes the DevSpd field of the DCFG register depending on the PHY type ++ * and the enumeration speed of the device. ++ */ ++static void init_devspd(dwc_otg_core_if_t *core_if) ++{ ++ uint32_t val; ++ dcfg_data_t dcfg; ++ ++ if (((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) || ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* Full speed PHY */ ++ val = 0x3; ++ } ++ else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) { ++ /* High speed PHY running at full speed */ ++ val = 0x1; ++ } ++ else { ++ /* High speed PHY running at high speed */ ++ val = 0x0; ++ } ++ ++ DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val); ++ ++ dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg); ++ dcfg.b.devspd = val; ++ dwc_write_reg32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32); ++} ++ ++/** ++ * This function calculates the number of IN EPS ++ * using GHWCFG1 and GHWCFG2 registers values ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ */ ++static uint32_t calc_num_in_eps(dwc_otg_core_if_t *core_if) ++{ ++ uint32_t num_in_eps = 0; ++ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; ++ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3; ++ uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps; ++ int i; ++ ++ ++ for(i = 0; i < num_eps; ++i) ++ { ++ if(!(hwcfg1 & 0x1)) ++ num_in_eps++; ++ ++ hwcfg1 >>= 2; ++ } ++ ++ if(core_if->hwcfg4.b.ded_fifo_en) { ++ num_in_eps = (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps; ++ } ++ ++ return num_in_eps; ++} ++ ++ ++/** ++ * This function calculates the number of OUT EPS ++ * using GHWCFG1 and GHWCFG2 registers values ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ */ ++static uint32_t calc_num_out_eps(dwc_otg_core_if_t *core_if) ++{ ++ uint32_t num_out_eps = 0; ++ uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep; ++ uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2; ++ int i; ++ ++ for(i = 0; i < num_eps; ++i) ++ { ++ if(!(hwcfg1 & 0x2)) ++ num_out_eps++; ++ ++ hwcfg1 >>= 2; ++ } ++ return num_out_eps; ++} ++/** ++ * This function initializes the DWC_otg controller registers and ++ * prepares the core for device mode or host mode operation. ++ * ++ * @param core_if Programming view of the DWC_otg controller ++ * ++ */ ++void dwc_otg_core_init(dwc_otg_core_if_t *core_if) ++{ ++ int i = 0; ++ dwc_otg_core_global_regs_t *global_regs = ++ core_if->core_global_regs; ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ gahbcfg_data_t ahbcfg = { .d32 = 0 }; ++ gusbcfg_data_t usbcfg = { .d32 = 0 }; ++ gi2cctl_data_t i2cctl = { .d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p)\n", core_if); ++ ++ /* Common Initialization */ ++ ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ ++// usbcfg.b.tx_end_delay = 1; ++ /* Program the ULPI External VBUS bit if needed */ ++ usbcfg.b.ulpi_ext_vbus_drv = ++ (core_if->core_params->phy_ulpi_ext_vbus == DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0; ++ ++ /* Set external TS Dline pulsing */ ++ usbcfg.b.term_sel_dl_pulse = (core_if->core_params->ts_dline == 1) ? 1 : 0; ++ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32); ++ ++ ++ /* Reset the Controller */ ++ dwc_otg_core_reset(core_if); ++ ++ /* Initialize parameters from Hardware configuration registers. */ ++ dev_if->num_in_eps = calc_num_in_eps(core_if); ++ dev_if->num_out_eps = calc_num_out_eps(core_if); ++ ++ ++ DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n", core_if->hwcfg4.b.num_dev_perio_in_ep); ++ ++ for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) ++ { ++ dev_if->perio_tx_fifo_size[i] = ++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16; ++ DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n", ++ i, dev_if->perio_tx_fifo_size[i]); ++ } ++ ++ for (i=0; i < core_if->hwcfg4.b.num_in_eps; i++) ++ { ++ dev_if->tx_fifo_size[i] = ++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i]) >> 16; ++ DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n", ++ i, dev_if->perio_tx_fifo_size[i]); ++ } ++ ++ core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth; ++ core_if->rx_fifo_size = ++ dwc_read_reg32(&global_regs->grxfsiz); ++ core_if->nperio_tx_fifo_size = ++ dwc_read_reg32(&global_regs->gnptxfsiz) >> 16; ++ ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n", core_if->nperio_tx_fifo_size); ++ ++ /* This programming sequence needs to happen in FS mode before any other ++ * programming occurs */ ++ if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) && ++ (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) { ++ /* If FS mode with FS PHY */ ++ ++ /* core_init() is now called on every switch so only call the ++ * following for the first time through. */ ++ if (!core_if->phy_init_done) { ++ core_if->phy_init_done = 1; ++ DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n"); ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ usbcfg.b.physel = 1; ++ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Reset after a PHY select */ ++ dwc_otg_core_reset(core_if); ++ } ++ ++ /* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also ++ * do this on HNP Dev/Host mode switches (done in dev_init and ++ * host_init). */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ init_fslspclksel(core_if); ++ } ++ else { ++ init_devspd(core_if); ++ } ++ ++ if (core_if->core_params->i2c_enable) { ++ DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n"); ++ /* Program GUSBCFG.OtgUtmifsSel to I2C */ ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ usbcfg.b.otgutmifssel = 1; ++ dwc_write_reg32 (&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Program GI2CCTL.I2CEn */ ++ i2cctl.d32 = dwc_read_reg32(&global_regs->gi2cctl); ++ i2cctl.b.i2cdevaddr = 1; ++ i2cctl.b.i2cen = 0; ++ dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32); ++ i2cctl.b.i2cen = 1; ++ dwc_write_reg32 (&global_regs->gi2cctl, i2cctl.d32); ++ } ++ ++ } /* endif speed == DWC_SPEED_PARAM_FULL */ ++ ++ else { ++ /* High speed PHY. */ ++ if (!core_if->phy_init_done) { ++ core_if->phy_init_done = 1; ++ /* HS PHY parameters. These parameters are preserved ++ * during soft reset so only program the first time. Do ++ * a soft reset immediately after setting phyif. */ ++ usbcfg.b.ulpi_utmi_sel = core_if->core_params->phy_type; ++ if (usbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ usbcfg.b.phyif = 0; ++ usbcfg.b.ddrsel = core_if->core_params->phy_ulpi_ddr; ++ } ++ else { ++ /* UTMI+ interface */ ++ if (core_if->core_params->phy_utmi_width == 16) { ++ usbcfg.b.phyif = 1; ++ } ++ else { ++ usbcfg.b.phyif = 0; ++ } ++ } ++ ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Reset after setting the PHY parameters */ ++ dwc_otg_core_reset(core_if); ++ } ++ } ++ ++ if ((core_if->hwcfg2.b.hs_phy_type == 2) && ++ (core_if->hwcfg2.b.fs_phy_type == 1) && ++ (core_if->core_params->ulpi_fs_ls)) { ++ DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n"); ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ usbcfg.b.ulpi_fsls = 1; ++ usbcfg.b.ulpi_clk_sus_m = 1; ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ } ++ else { ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ usbcfg.b.ulpi_fsls = 0; ++ usbcfg.b.ulpi_clk_sus_m = 0; ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ } ++ ++ /* Program the GAHBCFG Register.*/ ++ switch (core_if->hwcfg2.b.architecture) { ++ ++ case DWC_SLAVE_ONLY_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n"); ++ ahbcfg.b.nptxfemplvl_txfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; ++ ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY; ++ core_if->dma_enable = 0; ++ core_if->dma_desc_enable = 0; ++ break; ++ ++ case DWC_EXT_DMA_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n"); ++ ahbcfg.b.hburstlen = core_if->core_params->dma_burst_size; ++ core_if->dma_enable = (core_if->core_params->dma_enable != 0); ++ core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0); ++ break; ++ ++ case DWC_INT_DMA_ARCH: ++ DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n"); ++ ahbcfg.b.hburstlen = DWC_GAHBCFG_INT_DMA_BURST_INCR; ++ core_if->dma_enable = (core_if->core_params->dma_enable != 0); ++ core_if->dma_desc_enable = (core_if->core_params->dma_desc_enable != 0); ++ break; ++ ++ } ++ ahbcfg.b.dmaenable = core_if->dma_enable; ++ dwc_write_reg32(&global_regs->gahbcfg, ahbcfg.d32); ++ ++ core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en; ++ ++ core_if->pti_enh_enable = core_if->core_params->pti_enable != 0; ++ core_if->multiproc_int_enable = core_if->core_params->mpi_enable; ++ DWC_PRINT("Periodic Transfer Interrupt Enhancement - %s\n", ((core_if->pti_enh_enable) ? "enabled": "disabled")); ++ DWC_PRINT("Multiprocessor Interrupt Enhancement - %s\n", ((core_if->multiproc_int_enable) ? "enabled": "disabled")); ++ ++ /* ++ * Program the GUSBCFG register. ++ */ ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ ++ switch (core_if->hwcfg2.b.op_mode) { ++ case DWC_MODE_HNP_SRP_CAPABLE: ++ usbcfg.b.hnpcap = (core_if->core_params->otg_cap == ++ DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE); ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_SRP_ONLY_CAPABLE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_HNP_SRP_CAPABLE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ ++ case DWC_MODE_SRP_CAPABLE_DEVICE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_SRP_CAPABLE_DEVICE: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ ++ case DWC_MODE_SRP_CAPABLE_HOST: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = (core_if->core_params->otg_cap != ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE); ++ break; ++ ++ case DWC_MODE_NO_SRP_CAPABLE_HOST: ++ usbcfg.b.hnpcap = 0; ++ usbcfg.b.srpcap = 0; ++ break; ++ } ++ ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ ++ /* Enable common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* Do device or host intialization based on mode during PCD ++ * and HCD initialization */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ DWC_DEBUGPL(DBG_ANY, "Host Mode\n"); ++ core_if->op_state = A_HOST; ++ } ++ else { ++ DWC_DEBUGPL(DBG_ANY, "Device Mode\n"); ++ core_if->op_state = B_PERIPHERAL; ++#ifdef DWC_DEVICE_ONLY ++ dwc_otg_core_dev_init(core_if); ++#endif ++ } ++} ++ ++ ++/** ++ * This function enables the Device mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *core_if) ++{ ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ dwc_otg_core_global_regs_t *global_regs = ++ core_if->core_global_regs; ++ ++ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); ++ ++ /* Disable all interrupts. */ ++ dwc_write_reg32(&global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts */ ++ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Enable the common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* Enable interrupts */ ++ intr_mask.b.usbreset = 1; ++ intr_mask.b.enumdone = 1; ++ ++ if(!core_if->multiproc_int_enable) { ++ intr_mask.b.inepintr = 1; ++ intr_mask.b.outepintr = 1; ++ } ++ ++ intr_mask.b.erlysuspend = 1; ++ ++ if(core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.epmismatch = 1; ++ } ++ ++ ++#ifdef DWC_EN_ISOC ++ if(core_if->dma_enable) { ++ if(core_if->dma_desc_enable == 0) { ++ if(core_if->pti_enh_enable) { ++ dctl_data_t dctl = { .d32 = 0 }; ++ dctl.b.ifrmnum = 1; ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } else { ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++ } ++ } ++ } else { ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++ } ++#endif // DWC_EN_ISOC ++ ++/** @todo NGS: Should this be a module parameter? */ ++#ifdef USE_PERIODIC_EP ++ intr_mask.b.isooutdrop = 1; ++ intr_mask.b.eopframe = 1; ++ intr_mask.b.incomplisoin = 1; ++ intr_mask.b.incomplisoout = 1; ++#endif ++ ++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__, ++ dwc_read_reg32(&global_regs->gintmsk)); ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers for ++ * device mode. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ */ ++void dwc_otg_core_dev_init(dwc_otg_core_if_t *core_if) ++{ ++ int i; ++ dwc_otg_core_global_regs_t *global_regs = ++ core_if->core_global_regs; ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ dcfg_data_t dcfg = { .d32 = 0}; ++ grstctl_t resetctl = { .d32 = 0 }; ++ uint32_t rx_fifo_size; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t txfifosize; ++ dthrctl_data_t dthrctl; ++ fifosize_data_t ptxfifosize; ++ ++ /* Restart the Phy Clock */ ++ dwc_write_reg32(core_if->pcgcctl, 0); ++ ++ /* Device configuration register */ ++ init_devspd(core_if); ++ dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0; ++ dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80; ++ ++ dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n", core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n", params->dev_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n", params->dev_nperio_tx_fifo_size); ++ ++ /* Rx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->grxfsiz)); ++ ++ rx_fifo_size = params->dev_rx_fifo_size; ++ dwc_write_reg32(&global_regs->grxfsiz, rx_fifo_size); ++ ++ DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->grxfsiz)); ++ ++ /** Set Periodic Tx FIFO Mask all bits 0 */ ++ core_if->p_tx_msk = 0; ++ ++ /** Set Tx FIFO Mask all bits 0 */ ++ core_if->tx_msk = 0; ++ ++ if(core_if->en_multiple_tx_fifo == 0) { ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->gnptxfsiz)); ++ ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; ++ ++ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->gnptxfsiz)); ++ ++ /**@todo NGS: Fix Periodic FIFO Sizing! */ ++ /* ++ * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_perio_tx_fifo_size array and the FIFO size registers in ++ * the dptxfsiz array run from 0 to 14. ++ */ ++ /** @todo Finish debug of this */ ++ ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ for (i=0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) ++ { ++ ptxfifosize.b.depth = params->dev_perio_tx_fifo_size[i]; ++ DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i, ++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])); ++ dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i], ++ ptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i, ++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])); ++ ptxfifosize.b.startaddr += ptxfifosize.b.depth; ++ } ++ } ++ else { ++ /* ++ * Tx FIFOs These FIFOs are numbered from 1 to 15. ++ * Indexes of the FIFO size module parameters in the ++ * dev_tx_fifo_size array and the FIFO size registers in ++ * the dptxfsiz_dieptxf array run from 0 to 14. ++ */ ++ ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->gnptxfsiz)); ++ ++ nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->dev_rx_fifo_size; ++ ++ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n", ++ dwc_read_reg32(&global_regs->gnptxfsiz)); ++ ++ txfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ /* ++ Modify by kaiker ,for RT3052 device mode config ++ ++ In RT3052,Since the _core_if->hwcfg4.b.num_dev_perio_in_ep is ++ configed to 0 so these TX_FIF0 not config.IN EP will can't ++ more than 1 if not modify it. ++ ++ */ ++#if 1 ++ for (i=1 ; i <= dev_if->num_in_eps; i++) ++#else ++ for (i=1; i < _core_if->hwcfg4.b.num_dev_perio_in_ep; i++) ++#endif ++ { ++ ++ txfifosize.b.depth = params->dev_tx_fifo_size[i]; ++ ++ DWC_DEBUGPL(DBG_CIL, "initial dptxfsiz_dieptxf[%d]=%08x\n", i, ++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i])); ++ ++ dwc_write_reg32(&global_regs->dptxfsiz_dieptxf[i-1], ++ txfifosize.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "new dptxfsiz_dieptxf[%d]=%08x\n", i, ++ dwc_read_reg32(&global_regs->dptxfsiz_dieptxf[i-1])); ++ ++ txfifosize.b.startaddr += txfifosize.b.depth; ++ } ++ } ++ } ++ /* Flush the FIFOs */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); /* all Tx FIFOs */ ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ /* Flush the Learning Queue. */ ++ resetctl.b.intknqflsh = 1; ++ dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ /* Clear all pending Device Interrupts */ ++ ++ if(core_if->multiproc_int_enable) { ++ } ++ ++ /** @todo - if the condition needed to be checked ++ * or in any case all pending interrutps should be cleared? ++ */ ++ if(core_if->multiproc_int_enable) { ++ for(i = 0; i < core_if->dev_if->num_in_eps; ++i) { ++ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[i], 0); ++ } ++ ++ for(i = 0; i < core_if->dev_if->num_out_eps; ++i) { ++ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[i], 0); ++ } ++ ++ dwc_write_reg32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF); ++ dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, 0); ++ } else { ++ dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, 0); ++ dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, 0); ++ dwc_write_reg32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF); ++ dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, 0); ++ } ++ ++ for (i=0; i <= dev_if->num_in_eps; i++) ++ { ++ depctl_data_t depctl; ++ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl); ++ if (depctl.b.epena) { ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ } ++ else { ++ depctl.d32 = 0; ++ } ++ ++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32); ++ ++ ++ dwc_write_reg32(&dev_if->in_ep_regs[i]->dieptsiz, 0); ++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepdma, 0); ++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepint, 0xFF); ++ } ++ ++ for (i=0; i <= dev_if->num_out_eps; i++) ++ { ++ depctl_data_t depctl; ++ depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl); ++ if (depctl.b.epena) { ++ depctl.d32 = 0; ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ } ++ else { ++ depctl.d32 = 0; ++ } ++ ++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32); ++ ++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doeptsiz, 0); ++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepdma, 0); ++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepint, 0xFF); ++ } ++ ++ if(core_if->en_multiple_tx_fifo && core_if->dma_enable) { ++ dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1; ++ dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1; ++ dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1; ++ ++ dev_if->rx_thr_length = params->rx_thr_length; ++ dev_if->tx_thr_length = params->tx_thr_length; ++ ++ dev_if->setup_desc_index = 0; ++ ++ dthrctl.d32 = 0; ++ dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en; ++ dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en; ++ dthrctl.b.tx_thr_len = dev_if->tx_thr_length; ++ dthrctl.b.rx_thr_en = dev_if->rx_thr_en; ++ dthrctl.b.rx_thr_len = dev_if->rx_thr_length; ++ ++ dwc_write_reg32(&dev_if->dev_global_regs->dtknqr3_dthrctl, dthrctl.d32); ++ ++ DWC_DEBUGPL(DBG_CIL, "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n", ++ dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en, dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len, dthrctl.b.rx_thr_len); ++ ++ } ++ ++ dwc_otg_enable_device_interrupts(core_if); ++ ++ { ++ diepmsk_data_t msk = { .d32 = 0 }; ++ msk.b.txfifoundrn = 1; ++ if(core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], msk.d32, msk.d32); ++ } else { ++ dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, msk.d32, msk.d32); ++ } ++ } ++ ++ ++ if(core_if->multiproc_int_enable) { ++ /* Set NAK on Babble */ ++ dctl_data_t dctl = { .d32 = 0}; ++ dctl.b.nakonbble = 1; ++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, 0, dctl.d32); ++ } ++} ++ ++/** ++ * This function enables the Host mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t intr_mask = { .d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__); ++ ++ /* Disable all interrupts. */ ++ dwc_write_reg32(&global_regs->gintmsk, 0); ++ ++ /* Clear any pending interrupts. */ ++ dwc_write_reg32(&global_regs->gintsts, 0xFFFFFFFF); ++ ++ /* Enable the common interrupts */ ++ dwc_otg_enable_common_interrupts(core_if); ++ ++ /* ++ * Enable host mode interrupts without disturbing common ++ * interrupts. ++ */ ++ intr_mask.b.sofintr = 1; ++ intr_mask.b.portintr = 1; ++ intr_mask.b.hcintr = 1; ++ ++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32); ++} ++ ++/** ++ * This function disables the Host Mode interrupts. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ */ ++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = ++ core_if->core_global_regs; ++ gintmsk_data_t intr_mask = { .d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__); ++ ++ /* ++ * Disable host mode interrupts without disturbing common ++ * interrupts. ++ */ ++ intr_mask.b.sofintr = 1; ++ intr_mask.b.portintr = 1; ++ intr_mask.b.hcintr = 1; ++ intr_mask.b.ptxfempty = 1; ++ intr_mask.b.nptxfempty = 1; ++ ++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); ++} ++ ++/** ++ * This function initializes the DWC_otg controller registers for ++ * host mode. ++ * ++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the ++ * request queues. Host channels are reset to ensure that they are ready for ++ * performing transfers. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * ++ */ ++void dwc_otg_core_host_init(dwc_otg_core_if_t *core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ dwc_otg_host_if_t *host_if = core_if->host_if; ++ dwc_otg_core_params_t *params = core_if->core_params; ++ hprt0_data_t hprt0 = { .d32 = 0 }; ++ fifosize_data_t nptxfifosize; ++ fifosize_data_t ptxfifosize; ++ int i; ++ hcchar_data_t hcchar; ++ hcfg_data_t hcfg; ++ dwc_otg_hc_regs_t *hc_regs; ++ int num_channels; ++ gotgctl_data_t gotgctl = { .d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_CILV,"%s(%p)\n", __func__, core_if); ++ ++ /* Restart the Phy Clock */ ++ dwc_write_reg32(core_if->pcgcctl, 0); ++ ++ /* Initialize Host Configuration Register */ ++ init_fslspclksel(core_if); ++ if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) ++ { ++ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg); ++ hcfg.b.fslssupp = 1; ++ dwc_write_reg32(&host_if->host_global_regs->hcfg, hcfg.d32); ++ } ++ ++ /* Configure data FIFO sizes */ ++ if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) { ++ DWC_DEBUGPL(DBG_CIL,"Total FIFO Size=%d\n", core_if->total_fifo_size); ++ DWC_DEBUGPL(DBG_CIL,"Rx FIFO Size=%d\n", params->host_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL,"NP Tx FIFO Size=%d\n", params->host_nperio_tx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL,"P Tx FIFO Size=%d\n", params->host_perio_tx_fifo_size); ++ ++ /* Rx FIFO */ ++ DWC_DEBUGPL(DBG_CIL,"initial grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz)); ++ dwc_write_reg32(&global_regs->grxfsiz, params->host_rx_fifo_size); ++ DWC_DEBUGPL(DBG_CIL,"new grxfsiz=%08x\n", dwc_read_reg32(&global_regs->grxfsiz)); ++ ++ /* Non-periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL,"initial gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz)); ++ nptxfifosize.b.depth = params->host_nperio_tx_fifo_size; ++ nptxfifosize.b.startaddr = params->host_rx_fifo_size; ++ dwc_write_reg32(&global_regs->gnptxfsiz, nptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL,"new gnptxfsiz=%08x\n", dwc_read_reg32(&global_regs->gnptxfsiz)); ++ ++ /* Periodic Tx FIFO */ ++ DWC_DEBUGPL(DBG_CIL,"initial hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz)); ++ ptxfifosize.b.depth = params->host_perio_tx_fifo_size; ++ ptxfifosize.b.startaddr = nptxfifosize.b.startaddr + nptxfifosize.b.depth; ++ dwc_write_reg32(&global_regs->hptxfsiz, ptxfifosize.d32); ++ DWC_DEBUGPL(DBG_CIL,"new hptxfsiz=%08x\n", dwc_read_reg32(&global_regs->hptxfsiz)); ++ } ++ ++ /* Clear Host Set HNP Enable in the OTG Control Register */ ++ gotgctl.b.hstsethnpen = 1; ++ dwc_modify_reg32(&global_regs->gotgctl, gotgctl.d32, 0); ++ ++ /* Make sure the FIFOs are flushed. */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10 /* all Tx FIFOs */); ++ dwc_otg_flush_rx_fifo(core_if); ++ ++ /* Flush out any leftover queued requests. */ ++ num_channels = core_if->core_params->host_channels; ++ for (i = 0; i < num_channels; i++) ++ { ++ hc_regs = core_if->host_if->hc_regs[i]; ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.chen = 0; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ } ++ ++ /* Halt all channels to put them into a known state. */ ++ for (i = 0; i < num_channels; i++) ++ { ++ int count = 0; ++ hc_regs = core_if->host_if->hc_regs[i]; ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d\n", __func__, i); ++ do { ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (++count > 1000) ++ { ++ DWC_ERROR("%s: Unable to clear halt on channel %d\n", ++ __func__, i); ++ break; ++ } ++ } ++ while (hcchar.b.chen); ++ } ++ ++ /* Turn on the vbus power. */ ++ DWC_PRINT("Init: Port Power? op_state=%d\n", core_if->op_state); ++ if (core_if->op_state == A_HOST) { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_PRINT("Init: Power Port (%d)\n", hprt0.b.prtpwr); ++ if (hprt0.b.prtpwr == 0) { ++ hprt0.b.prtpwr = 1; ++ dwc_write_reg32(host_if->hprt0, hprt0.d32); ++ } ++ } ++ ++ dwc_otg_enable_host_interrupts(core_if); ++} ++ ++/** ++ * Prepares a host channel for transferring packets to/from a specific ++ * endpoint. The HCCHARn register is set up with the characteristics specified ++ * in _hc. Host channel interrupts that may need to be serviced while this ++ * transfer is in progress are enabled. ++ * ++ * @param core_if Programming view of DWC_otg controller ++ * @param hc Information needed to initialize the host channel ++ */ ++void dwc_otg_hc_init(dwc_otg_core_if_t *core_if, dwc_hc_t *hc) ++{ ++ uint32_t intr_enable; ++ hcintmsk_data_t hc_intr_mask; ++ gintmsk_data_t gintmsk = { .d32 = 0 }; ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ ++ uint8_t hc_num = hc->hc_num; ++ dwc_otg_host_if_t *host_if = core_if->host_if; ++ dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num]; ++ ++ /* Clear old interrupt conditions for this host channel. */ ++ hc_intr_mask.d32 = 0xFFFFFFFF; ++ hc_intr_mask.b.reserved = 0; ++ dwc_write_reg32(&hc_regs->hcint, hc_intr_mask.d32); ++ ++ /* Enable channel interrupts required for this transfer. */ ++ hc_intr_mask.d32 = 0; ++ hc_intr_mask.b.chhltd = 1; ++ if (core_if->dma_enable) { ++ hc_intr_mask.b.ahberr = 1; ++ if (hc->error_state && !hc->do_split && ++ hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ hc_intr_mask.b.ack = 1; ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.datatglerr = 1; ++ if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) { ++ hc_intr_mask.b.nak = 1; ++ } ++ } ++ } ++ } ++ else { ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.stall = 1; ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.datatglerr = 1; ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.bblerr = 1; ++ } ++ else { ++ hc_intr_mask.b.nak = 1; ++ hc_intr_mask.b.nyet = 1; ++ if (hc->do_ping) { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ ++ if (hc->do_split) { ++ hc_intr_mask.b.nak = 1; ++ if (hc->complete_split) { ++ hc_intr_mask.b.nyet = 1; ++ } ++ else { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ ++ if (hc->error_state) { ++ hc_intr_mask.b.ack = 1; ++ } ++ break; ++ case DWC_OTG_EP_TYPE_INTR: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.nak = 1; ++ hc_intr_mask.b.stall = 1; ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.datatglerr = 1; ++ hc_intr_mask.b.frmovrun = 1; ++ ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.bblerr = 1; ++ } ++ if (hc->error_state) { ++ hc_intr_mask.b.ack = 1; ++ } ++ if (hc->do_split) { ++ if (hc->complete_split) { ++ hc_intr_mask.b.nyet = 1; ++ } ++ else { ++ hc_intr_mask.b.ack = 1; ++ } ++ } ++ break; ++ case DWC_OTG_EP_TYPE_ISOC: ++ hc_intr_mask.b.xfercompl = 1; ++ hc_intr_mask.b.frmovrun = 1; ++ hc_intr_mask.b.ack = 1; ++ ++ if (hc->ep_is_in) { ++ hc_intr_mask.b.xacterr = 1; ++ hc_intr_mask.b.bblerr = 1; ++ } ++ break; ++ } ++ } ++ dwc_write_reg32(&hc_regs->hcintmsk, hc_intr_mask.d32); ++ ++// if(hc->ep_type == DWC_OTG_EP_TYPE_BULK && !hc->ep_is_in) ++// hc->max_packet = 512; ++ /* Enable the top level host channel interrupt. */ ++ intr_enable = (1 << hc_num); ++ dwc_modify_reg32(&host_if->host_global_regs->haintmsk, 0, intr_enable); ++ ++ /* Make sure host channel interrupts are enabled. */ ++ gintmsk.b.hcintr = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32); ++ ++ /* ++ * Program the HCCHARn register with the endpoint characteristics for ++ * the current transfer. ++ */ ++ hcchar.d32 = 0; ++ hcchar.b.devaddr = hc->dev_addr; ++ hcchar.b.epnum = hc->ep_num; ++ hcchar.b.epdir = hc->ep_is_in; ++ hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW); ++ hcchar.b.eptype = hc->ep_type; ++ hcchar.b.mps = hc->max_packet; ++ ++ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32); ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " Dev Addr: %d\n", hcchar.b.devaddr); ++ DWC_DEBUGPL(DBG_HCDV, " Ep Num: %d\n", hcchar.b.epnum); ++ DWC_DEBUGPL(DBG_HCDV, " Is In: %d\n", hcchar.b.epdir); ++ DWC_DEBUGPL(DBG_HCDV, " Is Low Speed: %d\n", hcchar.b.lspddev); ++ DWC_DEBUGPL(DBG_HCDV, " Ep Type: %d\n", hcchar.b.eptype); ++ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps); ++ DWC_DEBUGPL(DBG_HCDV, " Multi Cnt: %d\n", hcchar.b.multicnt); ++ ++ /* ++ * Program the HCSPLIT register for SPLITs ++ */ ++ hcsplt.d32 = 0; ++ if (hc->do_split) { ++ DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n", hc->hc_num, ++ hc->complete_split ? "CSPLIT" : "SSPLIT"); ++ hcsplt.b.compsplt = hc->complete_split; ++ hcsplt.b.xactpos = hc->xact_pos; ++ hcsplt.b.hubaddr = hc->hub_addr; ++ hcsplt.b.prtaddr = hc->port_addr; ++ DWC_DEBUGPL(DBG_HCDV, " comp split %d\n", hc->complete_split); ++ DWC_DEBUGPL(DBG_HCDV, " xact pos %d\n", hc->xact_pos); ++ DWC_DEBUGPL(DBG_HCDV, " hub addr %d\n", hc->hub_addr); ++ DWC_DEBUGPL(DBG_HCDV, " port addr %d\n", hc->port_addr); ++ DWC_DEBUGPL(DBG_HCDV, " is_in %d\n", hc->ep_is_in); ++ DWC_DEBUGPL(DBG_HCDV, " Max Pkt: %d\n", hcchar.b.mps); ++ DWC_DEBUGPL(DBG_HCDV, " xferlen: %d\n", hc->xfer_len); ++ } ++ dwc_write_reg32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32); ++ ++} ++ ++/** ++ * Attempts to halt a host channel. This function should only be called in ++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under ++ * normal circumstances in DMA mode, the controller halts the channel when the ++ * transfer is complete or a condition occurs that requires application ++ * intervention. ++ * ++ * In slave mode, checks for a free request queue entry, then sets the Channel ++ * Enable and Channel Disable bits of the Host Channel Characteristics ++ * register of the specified channel to intiate the halt. If there is no free ++ * request queue entry, sets only the Channel Disable bit of the HCCHARn ++ * register to flush requests for this channel. In the latter case, sets a ++ * flag to indicate that the host channel needs to be halted when a request ++ * queue slot is open. ++ * ++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the ++ * HCCHARn register. The controller ensures there is space in the request ++ * queue before submitting the halt request. ++ * ++ * Some time may elapse before the core flushes any posted requests for this ++ * host channel and halts. The Channel Halted interrupt handler completes the ++ * deactivation of the host channel. ++ * ++ * @param core_if Controller register interface. ++ * @param hc Host channel to halt. ++ * @param halt_status Reason for halting the channel. ++ */ ++void dwc_otg_hc_halt(dwc_otg_core_if_t *core_if, ++ dwc_hc_t *hc, ++ dwc_otg_halt_status_e halt_status) ++{ ++ gnptxsts_data_t nptxsts; ++ hptxsts_data_t hptxsts; ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs; ++ dwc_otg_core_global_regs_t *global_regs; ++ dwc_otg_host_global_regs_t *host_global_regs; ++ ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ global_regs = core_if->core_global_regs; ++ host_global_regs = core_if->host_if->host_global_regs; ++ ++ WARN_ON(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS); ++ ++ if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || ++ halt_status == DWC_OTG_HC_XFER_AHB_ERR) { ++ /* ++ * Disable all channel interrupts except Ch Halted. The QTD ++ * and QH state associated with this transfer has been cleared ++ * (in the case of URB_DEQUEUE), so the channel needs to be ++ * shut down carefully to prevent crashes. ++ */ ++ hcintmsk_data_t hcintmsk; ++ hcintmsk.d32 = 0; ++ hcintmsk.b.chhltd = 1; ++ dwc_write_reg32(&hc_regs->hcintmsk, hcintmsk.d32); ++ ++ /* ++ * Make sure no other interrupts besides halt are currently ++ * pending. Handling another interrupt could cause a crash due ++ * to the QTD and QH state. ++ */ ++ dwc_write_reg32(&hc_regs->hcint, ~hcintmsk.d32); ++ ++ /* ++ * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR ++ * even if the channel was already halted for some other ++ * reason. ++ */ ++ hc->halt_status = halt_status; ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chen == 0) { ++ /* ++ * The channel is either already halted or it hasn't ++ * started yet. In DMA mode, the transfer may halt if ++ * it finishes normally or a condition occurs that ++ * requires driver intervention. Don't want to halt ++ * the channel again. In either Slave or DMA mode, ++ * it's possible that the transfer has been assigned ++ * to a channel, but not started yet when an URB is ++ * dequeued. Don't want to halt a channel that hasn't ++ * started yet. ++ */ ++ return; ++ } ++ } ++ ++ if (hc->halt_pending) { ++ /* ++ * A halt has already been issued for this channel. This might ++ * happen when a transfer is aborted by a higher level in ++ * the stack. ++ */ ++#ifdef DEBUG ++ DWC_PRINT("*** %s: Channel %d, _hc->halt_pending already set ***\n", ++ __func__, hc->hc_num); ++ ++/* dwc_otg_dump_global_registers(core_if); */ ++/* dwc_otg_dump_host_registers(core_if); */ ++#endif ++ return; ++ } ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 1; ++ ++ if (!core_if->dma_enable) { ++ /* Check for space in the request queue to issue the halt. */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { ++ nptxsts.d32 = dwc_read_reg32(&global_regs->gnptxsts); ++ if (nptxsts.b.nptxqspcavail == 0) { ++ hcchar.b.chen = 0; ++ } ++ } ++ else { ++ hptxsts.d32 = dwc_read_reg32(&host_global_regs->hptxsts); ++ if ((hptxsts.b.ptxqspcavail == 0) || (core_if->queuing_high_bandwidth)) { ++ hcchar.b.chen = 0; ++ } ++ } ++ } ++ ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->halt_status = halt_status; ++ ++ if (hcchar.b.chen) { ++ hc->halt_pending = 1; ++ hc->halt_on_queue = 0; ++ } ++ else { ++ hc->halt_on_queue = 1; ++ } ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hcchar: 0x%08x\n", hcchar.d32); ++ DWC_DEBUGPL(DBG_HCDV, " halt_pending: %d\n", hc->halt_pending); ++ DWC_DEBUGPL(DBG_HCDV, " halt_on_queue: %d\n", hc->halt_on_queue); ++ DWC_DEBUGPL(DBG_HCDV, " halt_status: %d\n", hc->halt_status); ++ ++ return; ++} ++ ++/** ++ * Clears the transfer state for a host channel. This function is normally ++ * called after a transfer is done and the host channel is being released. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Identifies the host channel to clean up. ++ */ ++void dwc_otg_hc_cleanup(dwc_otg_core_if_t *core_if, dwc_hc_t *hc) ++{ ++ dwc_otg_hc_regs_t *hc_regs; ++ ++ hc->xfer_started = 0; ++ ++ /* ++ * Clear channel interrupt enables and any unhandled channel interrupt ++ * conditions. ++ */ ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ dwc_write_reg32(&hc_regs->hcintmsk, 0); ++ dwc_write_reg32(&hc_regs->hcint, 0xFFFFFFFF); ++ ++#ifdef DEBUG ++ del_timer(&core_if->hc_xfer_timer[hc->hc_num]); ++ { ++ hcchar_data_t hcchar; ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", ++ __func__, hc->hc_num, hcchar.d32); ++ } ++ } ++#endif ++} ++ ++/** ++ * Sets the channel property that indicates in which frame a periodic transfer ++ * should occur. This is always set to the _next_ frame. This function has no ++ * effect on non-periodic transfers. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Identifies the host channel to set up and its properties. ++ * @param hcchar Current value of the HCCHAR register for the specified host ++ * channel. ++ */ ++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t *core_if, ++ dwc_hc_t *hc, ++ hcchar_data_t *hcchar) ++{ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ hfnum_data_t hfnum; ++ hfnum.d32 = dwc_read_reg32(&core_if->host_if->host_global_regs->hfnum); ++ ++ /* 1 if _next_ frame is odd, 0 if it's even */ ++ hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1; ++#ifdef DEBUG ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split && !hc->complete_split) { ++ switch (hfnum.b.frnum & 0x7) { ++ case 7: ++ core_if->hfnum_7_samples++; ++ core_if->hfnum_7_frrem_accum += hfnum.b.frrem; ++ break; ++ case 0: ++ core_if->hfnum_0_samples++; ++ core_if->hfnum_0_frrem_accum += hfnum.b.frrem; ++ break; ++ default: ++ core_if->hfnum_other_samples++; ++ core_if->hfnum_other_frrem_accum += hfnum.b.frrem; ++ break; ++ } ++ } ++#endif ++ } ++} ++ ++#ifdef DEBUG ++static void hc_xfer_timeout(unsigned long ptr) ++{ ++ hc_xfer_info_t *xfer_info = (hc_xfer_info_t *)ptr; ++ int hc_num = xfer_info->hc->hc_num; ++ DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num); ++ DWC_WARN(" start_hcchar_val 0x%08x\n", xfer_info->core_if->start_hcchar_val[hc_num]); ++} ++#endif ++ ++/* ++ * This function does the setup for a data transfer for a host channel and ++ * starts the transfer. May be called in either Slave mode or DMA mode. In ++ * Slave mode, the caller must ensure that there is sufficient space in the ++ * request queue and Tx Data FIFO. ++ * ++ * For an OUT transfer in Slave mode, it loads a data packet into the ++ * appropriate FIFO. If necessary, additional data packets will be loaded in ++ * the Host ISR. ++ * ++ * For an IN transfer in Slave mode, a data packet is requested. The data ++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary, ++ * additional data packets are requested in the Host ISR. ++ * ++ * For a PING transfer in Slave mode, the Do Ping bit is set in the egards, ++ * ++ * Steven ++ * ++ * register along with a packet count of 1 and the channel is enabled. This ++ * causes a single PING transaction to occur. Other fields in HCTSIZ are ++ * simply set to 0 since no data transfer occurs in this case. ++ * ++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with ++ * all the information required to perform the subsequent data transfer. In ++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the ++ * controller performs the entire PING protocol, then starts the data ++ * transfer. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param hc Information needed to initialize the host channel. The xfer_len ++ * value may be reduced to accommodate the max widths of the XferSize and ++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed ++ * to reflect the final xfer_len value. ++ */ ++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ uint16_t num_packets; ++ uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size; ++ uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count; ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ ++ hctsiz.d32 = 0; ++ ++ if (hc->do_ping) { ++ if (!core_if->dma_enable) { ++ dwc_otg_hc_do_ping(core_if, hc); ++ hc->xfer_started = 1; ++ return; ++ } ++ else { ++ hctsiz.b.dopng = 1; ++ } ++ } ++ ++ if (hc->do_split) { ++ num_packets = 1; ++ ++ if (hc->complete_split && !hc->ep_is_in) { ++ /* For CSPLIT OUT Transfer, set the size to 0 so the ++ * core doesn't expect any data written to the FIFO */ ++ hc->xfer_len = 0; ++ } ++ else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) { ++ hc->xfer_len = hc->max_packet; ++ } ++ else if (!hc->ep_is_in && (hc->xfer_len > 188)) { ++ hc->xfer_len = 188; ++ } ++ ++ hctsiz.b.xfersize = hc->xfer_len; ++ } ++ else { ++ /* ++ * Ensure that the transfer length and packet count will fit ++ * in the widths allocated for them in the HCTSIZn register. ++ */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * Make sure the transfer size is no larger than one ++ * (micro)frame's worth of data. (A check was done ++ * when the periodic transfer was accepted to ensure ++ * that a (micro)frame's worth of data can be ++ * programmed into a channel.) ++ */ ++ uint32_t max_periodic_len = hc->multi_count * hc->max_packet; ++ if (hc->xfer_len > max_periodic_len) { ++ hc->xfer_len = max_periodic_len; ++ } ++ else { ++ } ++ ++ } ++ else if (hc->xfer_len > max_hc_xfer_size) { ++ /* Make sure that xfer_len is a multiple of max packet size. */ ++ hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1; ++ } ++ ++ if (hc->xfer_len > 0) { ++ num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet; ++ if (num_packets > max_hc_pkt_count) { ++ num_packets = max_hc_pkt_count; ++ hc->xfer_len = num_packets * hc->max_packet; ++ } ++ } ++ else { ++ /* Need 1 packet for transfer length of 0. */ ++ num_packets = 1; ++ } ++ ++ if (hc->ep_is_in) { ++ /* Always program an integral # of max packets for IN transfers. */ ++ hc->xfer_len = num_packets * hc->max_packet; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * Make sure that the multi_count field matches the ++ * actual transfer length. ++ */ ++ hc->multi_count = num_packets; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* Set up the initial PID for the transfer. */ ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH) { ++ if (hc->ep_is_in) { ++ if (hc->multi_count == 1) { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } ++ else if (hc->multi_count == 2) { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; ++ } ++ else { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA2; ++ } ++ } ++ else { ++ if (hc->multi_count == 1) { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } ++ else { ++ hc->data_pid_start = DWC_OTG_HC_PID_MDATA; ++ } ++ } ++ } ++ else { ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA0; ++ } ++ } ++ ++ hctsiz.b.xfersize = hc->xfer_len; ++ } ++ ++ hc->start_pkt_count = num_packets; ++ hctsiz.b.pktcnt = num_packets; ++ hctsiz.b.pid = hc->data_pid_start; ++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " Xfer Size: %d\n", hctsiz.b.xfersize); ++ DWC_DEBUGPL(DBG_HCDV, " Num Pkts: %d\n", hctsiz.b.pktcnt); ++ DWC_DEBUGPL(DBG_HCDV, " Start PID: %d\n", hctsiz.b.pid); ++ ++ if (core_if->dma_enable) { ++#if defined (CONFIG_DWC_OTG_HOST_ONLY) ++ if ((uint32_t)hc->xfer_buff & 0x3) { ++ /* non DWORD-aligned buffer case*/ ++ if(!hc->qh->dw_align_buf) { ++ hc->qh->dw_align_buf = ++ dma_alloc_coherent(NULL, ++ core_if->core_params->max_transfer_size, ++ &hc->qh->dw_align_buf_dma, ++ GFP_ATOMIC | GFP_DMA); ++ if (!hc->qh->dw_align_buf) { ++ ++ DWC_ERROR("%s: Failed to allocate memory to handle " ++ "non-dword aligned buffer case\n", __func__); ++ return; ++ } ++ ++ } ++ if (!hc->ep_is_in) { ++ memcpy(hc->qh->dw_align_buf, phys_to_virt((uint32_t)hc->xfer_buff), hc->xfer_len); ++ } ++ ++ dwc_write_reg32(&hc_regs->hcdma, hc->qh->dw_align_buf_dma); ++ } ++ else ++#endif ++ dwc_write_reg32(&hc_regs->hcdma, (uint32_t)hc->xfer_buff); ++ } ++ ++ /* Start the split */ ++ if (hc->do_split) { ++ hcsplt_data_t hcsplt; ++ hcsplt.d32 = dwc_read_reg32 (&hc_regs->hcsplt); ++ hcsplt.b.spltena = 1; ++ dwc_write_reg32(&hc_regs->hcsplt, hcsplt.d32); ++ } ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.multicnt = hc->multi_count; ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++#ifdef DEBUG ++ core_if->start_hcchar_val[hc->hc_num] = hcchar.d32; ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n", ++ __func__, hc->hc_num, hcchar.d32); ++ } ++#endif ++ ++ /* Set host channel enable after all other setup is complete. */ ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ ++ hc->xfer_started = 1; ++ hc->requests++; ++ ++ if (!core_if->dma_enable && ++ !hc->ep_is_in && hc->xfer_len > 0) { ++ /* Load OUT packet into the appropriate Tx FIFO. */ ++ dwc_otg_hc_write_packet(core_if, hc); ++ } ++ ++#ifdef DEBUG ++ /* Start a timer for this transfer. */ ++ core_if->hc_xfer_timer[hc->hc_num].function = hc_xfer_timeout; ++ core_if->hc_xfer_info[hc->hc_num].core_if = core_if; ++ core_if->hc_xfer_info[hc->hc_num].hc = hc; ++ core_if->hc_xfer_timer[hc->hc_num].data = (unsigned long)(&core_if->hc_xfer_info[hc->hc_num]); ++ core_if->hc_xfer_timer[hc->hc_num].expires = jiffies + (HZ*10); ++ add_timer(&core_if->hc_xfer_timer[hc->hc_num]); ++#endif ++} ++ ++/** ++ * This function continues a data transfer that was started by previous call ++ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is ++ * sufficient space in the request queue and Tx Data FIFO. This function ++ * should only be called in Slave mode. In DMA mode, the controller acts ++ * autonomously to complete transfers programmed to a host channel. ++ * ++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO ++ * if there is any data remaining to be queued. For an IN transfer, another ++ * data packet is always requested. For the SETUP phase of a control transfer, ++ * this function does nothing. ++ * ++ * @return 1 if a new request is queued, 0 if no more requests are required ++ * for this transfer. ++ */ ++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *core_if, dwc_hc_t *hc) ++{ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ ++ if (hc->do_split) { ++ /* SPLITs always queue just once per channel */ ++ return 0; ++ } ++ else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { ++ /* SETUPs are queued only once since they can't be NAKed. */ ++ return 0; ++ } ++ else if (hc->ep_is_in) { ++ /* ++ * Always queue another request for other IN transfers. If ++ * back-to-back INs are issued and NAKs are received for both, ++ * the driver may still be processing the first NAK when the ++ * second NAK is received. When the interrupt handler clears ++ * the NAK interrupt for the first NAK, the second NAK will ++ * not be seen. So we can't depend on the NAK interrupt ++ * handler to requeue a NAKed request. Instead, IN requests ++ * are issued each time this function is called. When the ++ * transfer completes, the extra requests for the channel will ++ * be flushed. ++ */ ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ DWC_DEBUGPL(DBG_HCDV, " IN xfer: hcchar = 0x%08x\n", hcchar.d32); ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ hc->requests++; ++ return 1; ++ } ++ else { ++ /* OUT transfers. */ ++ if (hc->xfer_count < hc->xfer_len) { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ hcchar_data_t hcchar; ++ dwc_otg_hc_regs_t *hc_regs; ++ hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hc_set_even_odd_frame(core_if, hc, &hcchar); ++ } ++ ++ /* Load OUT packet into the appropriate Tx FIFO. */ ++ dwc_otg_hc_write_packet(core_if, hc); ++ hc->requests++; ++ return 1; ++ } ++ else { ++ return 0; ++ } ++ } ++} ++ ++/** ++ * Starts a PING transfer. This function should only be called in Slave mode. ++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled. ++ */ ++void dwc_otg_hc_do_ping(dwc_otg_core_if_t *core_if, dwc_hc_t *hc) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num]; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num); ++ ++ hctsiz.d32 = 0; ++ hctsiz.b.dopng = 1; ++ hctsiz.b.pktcnt = 1; ++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.chen = 1; ++ hcchar.b.chdis = 0; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++} ++ ++/* ++ * This function writes a packet into the Tx FIFO associated with the Host ++ * Channel. For a channel associated with a non-periodic EP, the non-periodic ++ * Tx FIFO is written. For a channel associated with a periodic EP, the ++ * periodic Tx FIFO is written. This function should only be called in Slave ++ * mode. ++ * ++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by ++ * then number of bytes written to the Tx FIFO. ++ */ ++void dwc_otg_hc_write_packet(dwc_otg_core_if_t *core_if, dwc_hc_t *hc) ++{ ++ uint32_t i; ++ uint32_t remaining_count; ++ uint32_t byte_count; ++ uint32_t dword_count; ++ ++ uint32_t *data_buff = (uint32_t *)(hc->xfer_buff); ++ uint32_t *data_fifo = core_if->data_fifo[hc->hc_num]; ++ ++ remaining_count = hc->xfer_len - hc->xfer_count; ++ if (remaining_count > hc->max_packet) { ++ byte_count = hc->max_packet; ++ } ++ else { ++ byte_count = remaining_count; ++ } ++ ++ dword_count = (byte_count + 3) / 4; ++ ++ if ((((unsigned long)data_buff) & 0x3) == 0) { ++ /* xfer_buff is DWORD aligned. */ ++ for (i = 0; i < dword_count; i++, data_buff++) ++ { ++ dwc_write_reg32(data_fifo, *data_buff); ++ } ++ } ++ else { ++ /* xfer_buff is not DWORD aligned. */ ++ for (i = 0; i < dword_count; i++, data_buff++) ++ { ++ dwc_write_reg32(data_fifo, get_unaligned(data_buff)); ++ } ++ } ++ ++ hc->xfer_count += byte_count; ++ hc->xfer_buff += byte_count; ++} ++ ++/** ++ * Gets the current USB frame number. This is the frame number from the last ++ * SOF packet. ++ */ ++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *core_if) ++{ ++ dsts_data_t dsts; ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ /* read current frame/microframe number from DSTS register */ ++ return dsts.b.soffn; ++} ++ ++/** ++ * This function reads a setup packet from the Rx FIFO into the destination ++ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl) ++ * Interrupt routine when a SETUP packet has been received in Slave mode. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dest Destination buffer for packet data. ++ */ ++void dwc_otg_read_setup_packet(dwc_otg_core_if_t *core_if, uint32_t *dest) ++{ ++ /* Get the 8 bytes of a setup transaction data */ ++ ++ /* Pop 2 DWORDS off the receive data FIFO into memory */ ++ dest[0] = dwc_read_reg32(core_if->data_fifo[0]); ++ dest[1] = dwc_read_reg32(core_if->data_fifo[0]); ++} ++ ++ ++/** ++ * This function enables EP0 OUT to receive SETUP packets and configures EP0 ++ * IN for transmitting packets. It is normally called when the ++ * "Enumeration Done" interrupt occurs. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dsts_data_t dsts; ++ depctl_data_t diepctl; ++ depctl_data_t doepctl; ++ dctl_data_t dctl = { .d32 = 0 }; ++ ++ /* Read the Device Status and Endpoint 0 Control registers */ ++ dsts.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dsts); ++ diepctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl); ++ doepctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl); ++ ++ /* Set the MPS of the IN EP based on the enumeration speed */ ++ switch (dsts.b.enumspd) { ++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: ++ diepctl.b.mps = DWC_DEP0CTL_MPS_64; ++ break; ++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: ++ diepctl.b.mps = DWC_DEP0CTL_MPS_8; ++ break; ++ } ++ ++ dwc_write_reg32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32); ++ ++ /* Enable OUT EP for receive */ ++ doepctl.b.epena = 1; ++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n", ++ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl)); ++ DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n", ++ dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl)); ++#endif ++ dctl.b.cgnpinnak = 1; ++ ++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32); ++ DWC_DEBUGPL(DBG_PCDV,"dctl=%0x\n", ++ dwc_read_reg32(&dev_if->dev_global_regs->dctl)); ++} ++ ++/** ++ * This function activates an EP. The Device EP control register for ++ * the EP is configured as defined in the ep structure. Note: This ++ * function is not used for EP0. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to activate. ++ */ ++void dwc_otg_ep_activate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ depctl_data_t depctl; ++ volatile uint32_t *addr; ++ daint_data_t daintmsk = { .d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num, ++ (ep->is_in?"IN":"OUT")); ++ ++ /* Read DEPCTLn register */ ++ if (ep->is_in == 1) { ++ addr = &dev_if->in_ep_regs[ep->num]->diepctl; ++ daintmsk.ep.in = 1<<ep->num; ++ } ++ else { ++ addr = &dev_if->out_ep_regs[ep->num]->doepctl; ++ daintmsk.ep.out = 1<<ep->num; ++ } ++ ++ /* If the EP is already active don't change the EP Control ++ * register. */ ++ depctl.d32 = dwc_read_reg32(addr); ++ if (!depctl.b.usbactep) { ++ depctl.b.mps = ep->maxpacket; ++ depctl.b.eptype = ep->type; ++ depctl.b.txfnum = ep->tx_fifo_num; ++ ++ if (ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ depctl.b.setd0pid = 1; // ??? ++ } ++ else { ++ depctl.b.setd0pid = 1; ++ } ++ depctl.b.usbactep = 1; ++ ++ dwc_write_reg32(addr, depctl.d32); ++ DWC_DEBUGPL(DBG_PCDV,"DEPCTL=%08x\n", dwc_read_reg32(addr)); ++ } ++ ++ /* Enable the Interrupt for this EP */ ++ if(core_if->multiproc_int_enable) { ++ if (ep->is_in == 1) { ++ diepmsk_data_t diepmsk = { .d32 = 0}; ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ diepmsk.b.intknepmis = 1; ++ diepmsk.b.txfifoundrn = 1; //????? ++ ++ ++ if(core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++/* ++ if(core_if->dma_enable) { ++ doepmsk.b.nak = 1; ++ } ++*/ ++ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num], diepmsk.d32); ++ ++ } else { ++ doepmsk_data_t doepmsk = { .d32 = 0}; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ ++ ++ if(core_if->dma_desc_enable) { ++ doepmsk.b.bna = 1; ++ } ++/* ++ doepmsk.b.babble = 1; ++ doepmsk.b.nyet = 1; ++ doepmsk.b.nak = 1; ++*/ ++ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[ep->num], doepmsk.d32); ++ } ++ dwc_modify_reg32(&dev_if->dev_global_regs->deachintmsk, ++ 0, daintmsk.d32); ++ } else { ++ dwc_modify_reg32(&dev_if->dev_global_regs->daintmsk, ++ 0, daintmsk.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV,"DAINTMSK=%0x\n", ++ dwc_read_reg32(&dev_if->dev_global_regs->daintmsk)); ++ ++ ep->stall_clear_flag = 0; ++ return; ++} ++ ++/** ++ * This function deactivates an EP. This is done by clearing the USB Active ++ * EP bit in the Device EP control register. Note: This function is not used ++ * for EP0. EP0 cannot be deactivated. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to deactivate. ++ */ ++void dwc_otg_ep_deactivate(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ depctl_data_t depctl = { .d32 = 0 }; ++ volatile uint32_t *addr; ++ daint_data_t daintmsk = { .d32 = 0}; ++ ++ /* Read DEPCTLn register */ ++ if (ep->is_in == 1) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ daintmsk.ep.in = 1<<ep->num; ++ } ++ else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ daintmsk.ep.out = 1<<ep->num; ++ } ++ ++ depctl.b.usbactep = 0; ++ ++ if(core_if->dma_desc_enable) ++ depctl.b.epdis = 1; ++ ++ dwc_write_reg32(addr, depctl.d32); ++ ++ /* Disable the Interrupt for this EP */ ++ if(core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->deachintmsk, ++ daintmsk.d32, 0); ++ ++ if (ep->is_in == 1) { ++ dwc_write_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[ep->num], 0); ++ } else { ++ dwc_write_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[ep->num], 0); ++ } ++ } else { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->daintmsk, ++ daintmsk.d32, 0); ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++static void init_dma_desc_chain(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ dwc_otg_dma_desc_t* dma_desc; ++ uint32_t offset; ++ uint32_t xfer_est; ++ int i; ++ ++ ep->desc_cnt = ( ep->total_len / ep->maxxfer) + ++ ((ep->total_len % ep->maxxfer) ? 1 : 0); ++ if(!ep->desc_cnt) ++ ep->desc_cnt = 1; ++ ++ dma_desc = ep->desc_addr; ++ xfer_est = ep->total_len; ++ offset = 0; ++ for( i = 0; i < ep->desc_cnt; ++i) { ++ /** DMA Descriptor Setup */ ++ if(xfer_est > ep->maxxfer) { ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 0; ++ dma_desc->status.b.ioc = 0; ++ dma_desc->status.b.sp = 0; ++ dma_desc->status.b.bytes = ep->maxxfer; ++ dma_desc->buf = ep->dma_addr + offset; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ xfer_est -= ep->maxxfer; ++ offset += ep->maxxfer; ++ } else { ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ if(ep->is_in) { ++ dma_desc->status.b.sp = (xfer_est % ep->maxpacket) ? ++ 1 : ((ep->sent_zlp) ? 1 : 0); ++ dma_desc->status.b.bytes = xfer_est; ++ } else { ++ dma_desc->status.b.bytes = xfer_est + ((4 - (xfer_est & 0x3)) & 0x3) ; ++ } ++ ++ dma_desc->buf = ep->dma_addr + offset; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ } ++ dma_desc ++; ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ depctl_data_t depctl; ++ deptsiz_data_t deptsiz; ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); ++ ++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " ++ "xfer_buff=%p start_xfer_buff=%p\n", ++ ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len, ++ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff); ++ ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[ep->num]; ++ ++ gnptxsts_data_t gtxstatus; ++ ++ gtxstatus.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->gnptxsts); ++ ++ if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) { ++#ifdef DEBUG ++ DWC_PRINT("TX Queue Full (0x%0x)\n", gtxstatus.d32); ++#endif ++ return; ++ } ++ ++ depctl.d32 = dwc_read_reg32(&(in_regs->diepctl)); ++ deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz)); ++ ++ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? ++ ep->maxxfer : (ep->total_len - ep->xfer_len); ++ ++ /* Zero Length Packet? */ ++ if ((ep->xfer_len - ep->xfer_count) == 0) { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ } ++ else { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - ep->xfer_count - 1 + ep->maxpacket) / ++ ep->maxpacket; ++ } ++ ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); ++ dwc_write_reg32 (&(in_regs->diepdma), ++ (uint32_t)ep->dma_addr); ++ } ++ else { ++ init_dma_desc_chain(core_if, ep); ++ /** DIEPDMAn Register write */ ++ dwc_write_reg32(&in_regs->diepdma, ep->dma_desc_addr); ++ } ++ } ++ else { ++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); ++ if(ep->type != DWC_OTG_EP_TYPE_ISOC) { ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, ++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, ++ * the data will be written into the fifo by the ISR. ++ */ ++ if(core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } ++ else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if(ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk = 1 << ep->num; ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ ++ } ++ } ++ } ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ dwc_write_reg32(&in_regs->diepctl, depctl.d32); ++ ++ depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl); ++ depctl.b.nextep = ep->num; ++ dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32); ++ ++ } ++ else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[ep->num]; ++ ++ depctl.d32 = dwc_read_reg32(&(out_regs->doepctl)); ++ deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz)); ++ ++ ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ? ++ ep->maxxfer : (ep->total_len - ep->xfer_len); ++ ++ /* Program the transfer size and packet count as follows: ++ * ++ * pktcnt = N ++ * xfersize = N * maxpacket ++ */ ++ if ((ep->xfer_len - ep->xfer_count) == 0) { ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ } ++ else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - ep->xfer_count + (ep->maxpacket - 1)) / ++ ep->maxpacket; ++ ep->xfer_len = deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count; ++ deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count; ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n", ++ ep->num, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); ++ ++ dwc_write_reg32 (&(out_regs->doepdma), ++ (uint32_t)ep->dma_addr); ++ } ++ else { ++ init_dma_desc_chain(core_if, ep); ++ ++ /** DOEPDMAn Register write */ ++ dwc_write_reg32(&out_regs->doepdma, ep->dma_desc_addr); ++ } ++ } ++ else { ++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ ++ dwc_write_reg32(&out_regs->doepctl, depctl.d32); ++ ++ DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n", ++ dwc_read_reg32(&out_regs->doepctl), ++ dwc_read_reg32(&out_regs->doeptsiz)); ++ DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n", ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk), ++ dwc_read_reg32(&core_if->core_global_regs->gintmsk)); ++ } ++} ++ ++/** ++ * This function setup a zero length transfer in Buffer DMA and ++ * Slave modes for usb requests with zero field set ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ ++ depctl_data_t depctl; ++ deptsiz_data_t deptsiz; ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__); ++ ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[ep->num]; ++ ++ depctl.d32 = dwc_read_reg32(&(in_regs->diepctl)); ++ deptsiz.d32 = dwc_read_reg32(&(in_regs->dieptsiz)); ++ ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if (core_if->dma_desc_enable == 0) { ++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); ++ dwc_write_reg32 (&(in_regs->diepdma), ++ (uint32_t)ep->dma_addr); ++ } ++ } ++ else { ++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, ++ * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode, ++ * the data will be written into the fifo by the ISR. ++ */ ++ if(core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } ++ else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if(ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk = 1 << ep->num; ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ dwc_write_reg32(&in_regs->diepctl, depctl.d32); ++ ++ depctl.d32 = dwc_read_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl); ++ depctl.b.nextep = ep->num; ++ dwc_write_reg32 (&core_if->dev_if->in_ep_regs[0]->diepctl, depctl.d32); ++ ++ } ++ else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[ep->num]; ++ ++ depctl.d32 = dwc_read_reg32(&(out_regs->doepctl)); ++ deptsiz.d32 = dwc_read_reg32(&(out_regs->doeptsiz)); ++ ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); ++ ++ dwc_write_reg32 (&(out_regs->doepdma), ++ (uint32_t)ep->dma_addr); ++ } ++ } ++ else { ++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ ++ dwc_write_reg32(&out_regs->doepctl, depctl.d32); ++ ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for EP0 and starts ++ * the transfer. For an IN transfer, the packets will be loaded into ++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are ++ * unloaded from the Rx FIFO in the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ depctl_data_t depctl; ++ deptsiz0_data_t deptsiz; ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ dwc_otg_dma_desc_t* dma_desc; ++ ++ DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d " ++ "xfer_buff=%p start_xfer_buff=%p \n", ++ ep->num, (ep->is_in?"IN":"OUT"), ep->xfer_len, ++ ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff); ++ ++ ep->total_len = ep->xfer_len; ++ ++ /* IN endpoint */ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[0]; ++ ++ gnptxsts_data_t gtxstatus; ++ ++ gtxstatus.d32 = ++ dwc_read_reg32(&core_if->core_global_regs->gnptxsts); ++ ++ if(core_if->en_multiple_tx_fifo == 0 && gtxstatus.b.nptxqspcavail == 0) { ++#ifdef DEBUG ++ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); ++ DWC_DEBUGPL(DBG_PCD,"DIEPCTL0=%0x\n", ++ dwc_read_reg32(&in_regs->diepctl)); ++ DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n", ++ deptsiz.d32, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ DWC_PRINT("TX Queue or FIFO Full (0x%0x)\n", ++ gtxstatus.d32); ++#endif ++ return; ++ } ++ ++ ++ depctl.d32 = dwc_read_reg32(&in_regs->diepctl); ++ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); ++ ++ /* Zero Length Packet? */ ++ if (ep->xfer_len == 0) { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 1; ++ } ++ else { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ if (ep->xfer_len > ep->maxpacket) { ++ ep->xfer_len = ep->maxpacket; ++ deptsiz.b.xfersize = ep->maxpacket; ++ } ++ else { ++ deptsiz.b.xfersize = ep->xfer_len; ++ } ++ deptsiz.b.pktcnt = 1; ++ ++ } ++ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ if(core_if->dma_desc_enable == 0) { ++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); ++ ++ dwc_write_reg32 (&(in_regs->diepdma), ++ (uint32_t)ep->dma_addr); ++ } ++ else { ++ dma_desc = core_if->dev_if->in_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1; ++ dma_desc->status.b.bytes = ep->xfer_len; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DIEPDMA0 Register write */ ++ dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr); ++ } ++ } ++ else { ++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ dwc_write_reg32(&in_regs->diepctl, depctl.d32); ++ ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, the ++ * data will be written into the fifo by the ISR. ++ */ ++ if (!core_if->dma_enable) { ++ if(core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ } ++ else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if(ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk |= 1 << ep->num; ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ } ++ else { ++ /* OUT endpoint */ ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[0]; ++ ++ depctl.d32 = dwc_read_reg32(&out_regs->doepctl); ++ deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz); ++ ++ /* Program the transfer size and packet count as follows: ++ * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) ++ * pktcnt = N */ ++ /* Zero Length Packet */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ ++ DWC_DEBUGPL(DBG_PCDV, "len=%d xfersize=%d pktcnt=%d\n", ++ ep->xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ ++ if (core_if->dma_enable) { ++ if(!core_if->dma_desc_enable) { ++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); ++ ++ dwc_write_reg32 (&(out_regs->doepdma), ++ (uint32_t)ep->dma_addr); ++ } ++ else { ++ dma_desc = core_if->dev_if->out_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = ep->maxpacket; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr); ++ } ++ } ++ else { ++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ ++ /* EP enable */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ dwc_write_reg32 (&(out_regs->doepctl), depctl.d32); ++ } ++} ++ ++/** ++ * This function continues control IN transfers started by ++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a ++ * single packet. NOTE: The DIEPCTL0/DOEPCTL0 registers only have one ++ * bit for the packet count. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP0 data. ++ */ ++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ depctl_data_t depctl; ++ deptsiz0_data_t deptsiz; ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ dwc_otg_dma_desc_t* dma_desc; ++ ++ if (ep->is_in == 1) { ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[0]; ++ gnptxsts_data_t tx_status = { .d32 = 0 }; ++ ++ tx_status.d32 = dwc_read_reg32(&core_if->core_global_regs->gnptxsts); ++ /** @todo Should there be check for room in the Tx ++ * Status Queue. If not remove the code above this comment. */ ++ ++ depctl.d32 = dwc_read_reg32(&in_regs->diepctl); ++ deptsiz.d32 = dwc_read_reg32(&in_regs->dieptsiz); ++ ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ ++ ++ if(core_if->dma_desc_enable == 0) { ++ deptsiz.b.xfersize = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket : ++ (ep->total_len - ep->xfer_count); ++ deptsiz.b.pktcnt = 1; ++ if(core_if->dma_enable == 0) { ++ ep->xfer_len += deptsiz.b.xfersize; ++ } else { ++ ep->xfer_len = deptsiz.b.xfersize; ++ } ++ dwc_write_reg32(&in_regs->dieptsiz, deptsiz.d32); ++ } ++ else { ++ ep->xfer_len = (ep->total_len - ep->xfer_count) > ep->maxpacket ? ep->maxpacket : ++ (ep->total_len - ep->xfer_count); ++ ++ dma_desc = core_if->dev_if->in_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.sp = (ep->xfer_len == ep->maxpacket) ? 0 : 1; ++ dma_desc->status.b.bytes = ep->xfer_len; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DIEPDMA0 Register write */ ++ dwc_write_reg32(&in_regs->diepdma, core_if->dev_if->dma_in_desc_addr); ++ } ++ ++ ++ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { ++ if(core_if->dma_desc_enable == 0) ++ dwc_write_reg32 (&(in_regs->diepdma), (uint32_t)ep->dma_addr); ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ dwc_write_reg32(&in_regs->diepctl, depctl.d32); ++ ++ /** ++ * Enable the Non-Periodic Tx FIFO empty interrupt, the ++ * data will be written into the fifo by the ISR. ++ */ ++ if (!core_if->dma_enable) { ++ if(core_if->en_multiple_tx_fifo == 0) { ++ /* First clear it from GINTSTS */ ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, ++ intr_mask.d32, intr_mask.d32); ++ ++ } ++ else { ++ /* Enable the Tx FIFO Empty Interrupt for this EP */ ++ if(ep->xfer_len > 0) { ++ uint32_t fifoemptymsk = 0; ++ fifoemptymsk |= 1 << ep->num; ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ 0, fifoemptymsk); ++ } ++ } ++ } ++ } ++ else { ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[0]; ++ ++ ++ depctl.d32 = dwc_read_reg32(&out_regs->doepctl); ++ deptsiz.d32 = dwc_read_reg32(&out_regs->doeptsiz); ++ ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->maxpacket; ++ deptsiz.b.pktcnt = 1; ++ ++ ++ if(core_if->dma_desc_enable == 0) { ++ dwc_write_reg32(&out_regs->doeptsiz, deptsiz.d32); ++ } ++ else { ++ dma_desc = core_if->dev_if->out_desc_addr; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = ep->maxpacket; ++ dma_desc->buf = ep->dma_addr; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ dwc_write_reg32(&out_regs->doepdma, core_if->dev_if->dma_out_desc_addr); ++ } ++ ++ ++ DWC_DEBUGPL(DBG_PCDV, "IN len=%d xfersize=%d pktcnt=%d [%08x]\n", ++ ep->xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) { ++ if(core_if->dma_desc_enable == 0) ++ dwc_write_reg32 (&(out_regs->doepdma), (uint32_t)ep->dma_addr); ++ } ++ ++ /* EP enable, IN data in FIFO */ ++ depctl.b.cnak = 1; ++ depctl.b.epena = 1; ++ dwc_write_reg32(&out_regs->doepctl, depctl.d32); ++ ++ } ++} ++ ++#ifdef DEBUG ++void dump_msg(const u8 *buf, unsigned int length) ++{ ++ unsigned int start, num, i; ++ char line[52], *p; ++ ++ if (length >= 512) ++ return; ++ start = 0; ++ while (length > 0) { ++ num = min(length, 16u); ++ p = line; ++ for (i = 0; i < num; ++i) ++ { ++ if (i == 8) ++ *p++ = ' '; ++ sprintf(p, " %02x", buf[i]); ++ p += 3; ++ } ++ *p = 0; ++ DWC_PRINT("%6x: %s\n", start, line); ++ buf += num; ++ start += num; ++ length -= num; ++ } ++} ++#else ++static inline void dump_msg(const u8 *buf, unsigned int length) ++{ ++} ++#endif ++ ++/** ++ * This function writes a packet into the Tx FIFO associated with the ++ * EP. For non-periodic EPs the non-periodic Tx FIFO is written. For ++ * periodic EPs the periodic Tx FIFO associated with the EP is written ++ * with all packets for the next micro-frame. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to write packet for. ++ * @param dma Indicates if DMA is being used. ++ */ ++void dwc_otg_ep_write_packet(dwc_otg_core_if_t *core_if, dwc_ep_t *ep, int dma) ++{ ++ /** ++ * The buffer is padded to DWORD on a per packet basis in ++ * slave/dma mode if the MPS is not DWORD aligned. The last ++ * packet, if short, is also padded to a multiple of DWORD. ++ * ++ * ep->xfer_buff always starts DWORD aligned in memory and is a ++ * multiple of DWORD in length ++ * ++ * ep->xfer_len can be any number of bytes ++ * ++ * ep->xfer_count is a multiple of ep->maxpacket until the last ++ * packet ++ * ++ * FIFO access is DWORD */ ++ ++ uint32_t i; ++ uint32_t byte_count; ++ uint32_t dword_count; ++ uint32_t *fifo; ++ uint32_t *data_buff = (uint32_t *)ep->xfer_buff; ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if, ep); ++ if (ep->xfer_count >= ep->xfer_len) { ++ DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num); ++ return; ++ } ++ ++ /* Find the byte length of the packet either short packet or MPS */ ++ if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) { ++ byte_count = ep->xfer_len - ep->xfer_count; ++ } ++ else { ++ byte_count = ep->maxpacket; ++ } ++ ++ /* Find the DWORD length, padded by extra bytes as neccessary if MPS ++ * is not a multiple of DWORD */ ++ dword_count = (byte_count + 3) / 4; ++ ++#ifdef VERBOSE ++ dump_msg(ep->xfer_buff, byte_count); ++#endif ++ ++ /**@todo NGS Where are the Periodic Tx FIFO addresses ++ * intialized? What should this be? */ ++ ++ fifo = core_if->data_fifo[ep->num]; ++ ++ ++ DWC_DEBUGPL((DBG_PCDV|DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n", fifo, data_buff, *data_buff, byte_count); ++ ++ if (!dma) { ++ for (i=0; i<dword_count; i++, data_buff++) { ++ dwc_write_reg32(fifo, *data_buff); ++ } ++ } ++ ++ ep->xfer_count += byte_count; ++ ep->xfer_buff += byte_count; ++ ep->dma_addr += byte_count; ++} ++ ++/** ++ * Set the EP STALL. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to set the stall on. ++ */ ++void dwc_otg_ep_set_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ depctl_data_t depctl; ++ volatile uint32_t *depctl_addr; ++ ++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, ++ (ep->is_in?"IN":"OUT")); ++ ++ DWC_PRINT("%s ep%d-%s\n", __func__, ep->num, ++ (ep->is_in?"in":"out")); ++ ++ if (ep->is_in == 1) { ++ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); ++ depctl.d32 = dwc_read_reg32(depctl_addr); ++ ++ /* set the disable and stall bits */ ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ } ++ depctl.b.stall = 1; ++ dwc_write_reg32(depctl_addr, depctl.d32); ++ } ++ else { ++ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); ++ depctl.d32 = dwc_read_reg32(depctl_addr); ++ ++ /* set the stall bit */ ++ depctl.b.stall = 1; ++ dwc_write_reg32(depctl_addr, depctl.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr)); ++ ++ return; ++} ++ ++/** ++ * Clear the EP STALL. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to clear stall from. ++ */ ++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ depctl_data_t depctl; ++ volatile uint32_t *depctl_addr; ++ ++ DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num, ++ (ep->is_in?"IN":"OUT")); ++ ++ if (ep->is_in == 1) { ++ depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl); ++ } ++ else { ++ depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl); ++ } ++ ++ depctl.d32 = dwc_read_reg32(depctl_addr); ++ ++ /* clear the stall bits */ ++ depctl.b.stall = 0; ++ ++ /* ++ * USB Spec 9.4.5: For endpoints using data toggle, regardless ++ * of whether an endpoint has the Halt feature set, a ++ * ClearFeature(ENDPOINT_HALT) request always results in the ++ * data toggle being reinitialized to DATA0. ++ */ ++ if (ep->type == DWC_OTG_EP_TYPE_INTR || ++ ep->type == DWC_OTG_EP_TYPE_BULK) { ++ depctl.b.setd0pid = 1; /* DATA0 */ ++ } ++ ++ dwc_write_reg32(depctl_addr, depctl.d32); ++ DWC_DEBUGPL(DBG_PCD,"DEPCTL=%0x\n",dwc_read_reg32(depctl_addr)); ++ return; ++} ++ ++/** ++ * This function reads a packet from the Rx FIFO into the destination ++ * buffer. To read SETUP data use dwc_otg_read_setup_packet. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dest Destination buffer for the packet. ++ * @param bytes Number of bytes to copy to the destination. ++ */ ++void dwc_otg_read_packet(dwc_otg_core_if_t *core_if, ++ uint8_t *dest, ++ uint16_t bytes) ++{ ++ int i; ++ int word_count = (bytes + 3) / 4; ++ ++ volatile uint32_t *fifo = core_if->data_fifo[0]; ++ uint32_t *data_buff = (uint32_t *)dest; ++ ++ /** ++ * @todo Account for the case where _dest is not dword aligned. This ++ * requires reading data from the FIFO into a uint32_t temp buffer, ++ * then moving it into the data buffer. ++ */ ++ ++ DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__, ++ core_if, dest, bytes); ++ ++ for (i=0; i<word_count; i++, data_buff++) ++ { ++ *data_buff = dwc_read_reg32(fifo); ++ } ++ ++ return; ++} ++ ++ ++ ++/** ++ * This functions reads the device registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *core_if) ++{ ++ int i; ++ volatile uint32_t *addr; ++ ++ DWC_PRINT("Device Global Registers\n"); ++ addr=&core_if->dev_if->dev_global_regs->dcfg; ++ DWC_PRINT("DCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->dev_global_regs->dctl; ++ DWC_PRINT("DCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->dev_global_regs->dsts; ++ DWC_PRINT("DSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->dev_global_regs->diepmsk; ++ DWC_PRINT("DIEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->dev_global_regs->doepmsk; ++ DWC_PRINT("DOEPMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->dev_global_regs->daint; ++ DWC_PRINT("DAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->dev_global_regs->daintmsk; ++ DWC_PRINT("DAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->dev_global_regs->dtknqr1; ++ DWC_PRINT("DTKNQR1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ if (core_if->hwcfg2.b.dev_token_q_depth > 6) { ++ addr=&core_if->dev_if->dev_global_regs->dtknqr2; ++ DWC_PRINT("DTKNQR2 @0x%08X : 0x%08X\n", ++ (uint32_t)addr,dwc_read_reg32(addr)); ++ } ++ ++ addr=&core_if->dev_if->dev_global_regs->dvbusdis; ++ DWC_PRINT("DVBUSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ ++ addr=&core_if->dev_if->dev_global_regs->dvbuspulse; ++ DWC_PRINT("DVBUSPULSE @0x%08X : 0x%08X\n", ++ (uint32_t)addr,dwc_read_reg32(addr)); ++ ++ if (core_if->hwcfg2.b.dev_token_q_depth > 14) { ++ addr=&core_if->dev_if->dev_global_regs->dtknqr3_dthrctl; ++ DWC_PRINT("DTKNQR3_DTHRCTL @0x%08X : 0x%08X\n", ++ (uint32_t)addr, dwc_read_reg32(addr)); ++ } ++/* ++ if (core_if->hwcfg2.b.dev_token_q_depth > 22) { ++ addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; ++ DWC_PRINT("DTKNQR4 @0x%08X : 0x%08X\n", ++ (uint32_t)addr, dwc_read_reg32(addr)); ++ } ++*/ ++ addr=&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk; ++ DWC_PRINT("FIFOEMPMSK @0x%08X : 0x%08X\n", (uint32_t)addr, dwc_read_reg32(addr)); ++ ++ addr=&core_if->dev_if->dev_global_regs->deachint; ++ DWC_PRINT("DEACHINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->dev_global_regs->deachintmsk; ++ DWC_PRINT("DEACHINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ ++ for (i=0; i<= core_if->dev_if->num_in_eps; i++) { ++ addr=&core_if->dev_if->dev_global_regs->diepeachintmsk[i]; ++ DWC_PRINT("DIEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr)); ++ } ++ ++ ++ for (i=0; i<= core_if->dev_if->num_out_eps; i++) { ++ addr=&core_if->dev_if->dev_global_regs->doepeachintmsk[i]; ++ DWC_PRINT("DOEPEACHINTMSK[%d] @0x%08X : 0x%08X\n", i, (uint32_t)addr, dwc_read_reg32(addr)); ++ } ++ ++ for (i=0; i<= core_if->dev_if->num_in_eps; i++) { ++ DWC_PRINT("Device IN EP %d Registers\n", i); ++ addr=&core_if->dev_if->in_ep_regs[i]->diepctl; ++ DWC_PRINT("DIEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->in_ep_regs[i]->diepint; ++ DWC_PRINT("DIEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->in_ep_regs[i]->dieptsiz; ++ DWC_PRINT("DIETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->in_ep_regs[i]->diepdma; ++ DWC_PRINT("DIEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->in_ep_regs[i]->dtxfsts; ++ DWC_PRINT("DTXFSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->in_ep_regs[i]->diepdmab; ++ DWC_PRINT("DIEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ } ++ ++ ++ for (i=0; i<= core_if->dev_if->num_out_eps; i++) { ++ DWC_PRINT("Device OUT EP %d Registers\n", i); ++ addr=&core_if->dev_if->out_ep_regs[i]->doepctl; ++ DWC_PRINT("DOEPCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->out_ep_regs[i]->doepfn; ++ DWC_PRINT("DOEPFN @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->out_ep_regs[i]->doepint; ++ DWC_PRINT("DOEPINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->out_ep_regs[i]->doeptsiz; ++ DWC_PRINT("DOETSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->out_ep_regs[i]->doepdma; ++ DWC_PRINT("DOEPDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->dev_if->out_ep_regs[i]->doepdmab; ++ DWC_PRINT("DOEPDMAB @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ ++ } ++ ++ ++ ++ return; ++} ++ ++/** ++ * This functions reads the SPRAM and prints its content ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_spram(dwc_otg_core_if_t *core_if) ++{ ++ volatile uint8_t *addr, *start_addr, *end_addr; ++ ++ DWC_PRINT("SPRAM Data:\n"); ++ start_addr = (void*)core_if->core_global_regs; ++ DWC_PRINT("Base Address: 0x%8X\n", (uint32_t)start_addr); ++ start_addr += 0x00028000; ++ end_addr=(void*)core_if->core_global_regs; ++ end_addr += 0x000280e0; ++ ++ for(addr = start_addr; addr < end_addr; addr+=16) ++ { ++ DWC_PRINT("0x%8X:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n", (uint32_t)addr, ++ addr[0], ++ addr[1], ++ addr[2], ++ addr[3], ++ addr[4], ++ addr[5], ++ addr[6], ++ addr[7], ++ addr[8], ++ addr[9], ++ addr[10], ++ addr[11], ++ addr[12], ++ addr[13], ++ addr[14], ++ addr[15] ++ ); ++ } ++ ++ return; ++} ++/** ++ * This function reads the host registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_host_registers(dwc_otg_core_if_t *core_if) ++{ ++ int i; ++ volatile uint32_t *addr; ++ ++ DWC_PRINT("Host Global Registers\n"); ++ addr=&core_if->host_if->host_global_regs->hcfg; ++ DWC_PRINT("HCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->host_if->host_global_regs->hfir; ++ DWC_PRINT("HFIR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->host_if->host_global_regs->hfnum; ++ DWC_PRINT("HFNUM @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->host_if->host_global_regs->hptxsts; ++ DWC_PRINT("HPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->host_if->host_global_regs->haint; ++ DWC_PRINT("HAINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->host_if->host_global_regs->haintmsk; ++ DWC_PRINT("HAINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=core_if->host_if->hprt0; ++ DWC_PRINT("HPRT0 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ ++ for (i=0; i<core_if->core_params->host_channels; i++) ++ { ++ DWC_PRINT("Host Channel %d Specific Registers\n", i); ++ addr=&core_if->host_if->hc_regs[i]->hcchar; ++ DWC_PRINT("HCCHAR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->host_if->hc_regs[i]->hcsplt; ++ DWC_PRINT("HCSPLT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->host_if->hc_regs[i]->hcint; ++ DWC_PRINT("HCINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->host_if->hc_regs[i]->hcintmsk; ++ DWC_PRINT("HCINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->host_if->hc_regs[i]->hctsiz; ++ DWC_PRINT("HCTSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->host_if->hc_regs[i]->hcdma; ++ DWC_PRINT("HCDMA @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ } ++ return; ++} ++ ++/** ++ * This function reads the core global registers and prints them ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_dump_global_registers(dwc_otg_core_if_t *core_if) ++{ ++ int i; ++ volatile uint32_t *addr; ++ ++ DWC_PRINT("Core Global Registers\n"); ++ addr=&core_if->core_global_regs->gotgctl; ++ DWC_PRINT("GOTGCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->gotgint; ++ DWC_PRINT("GOTGINT @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->gahbcfg; ++ DWC_PRINT("GAHBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->gusbcfg; ++ DWC_PRINT("GUSBCFG @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->grstctl; ++ DWC_PRINT("GRSTCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->gintsts; ++ DWC_PRINT("GINTSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->gintmsk; ++ DWC_PRINT("GINTMSK @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->grxstsr; ++ DWC_PRINT("GRXSTSR @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ //addr=&core_if->core_global_regs->grxstsp; ++ //DWC_PRINT("GRXSTSP @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->grxfsiz; ++ DWC_PRINT("GRXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->gnptxfsiz; ++ DWC_PRINT("GNPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->gnptxsts; ++ DWC_PRINT("GNPTXSTS @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->gi2cctl; ++ DWC_PRINT("GI2CCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->gpvndctl; ++ DWC_PRINT("GPVNDCTL @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->ggpio; ++ DWC_PRINT("GGPIO @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->guid; ++ DWC_PRINT("GUID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->gsnpsid; ++ DWC_PRINT("GSNPSID @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->ghwcfg1; ++ DWC_PRINT("GHWCFG1 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->ghwcfg2; ++ DWC_PRINT("GHWCFG2 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->ghwcfg3; ++ DWC_PRINT("GHWCFG3 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->ghwcfg4; ++ DWC_PRINT("GHWCFG4 @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ addr=&core_if->core_global_regs->hptxfsiz; ++ DWC_PRINT("HPTXFSIZ @0x%08X : 0x%08X\n",(uint32_t)addr,dwc_read_reg32(addr)); ++ ++ for (i=0; i<core_if->hwcfg4.b.num_dev_perio_in_ep; i++) ++ { ++ addr=&core_if->core_global_regs->dptxfsiz_dieptxf[i]; ++ DWC_PRINT("DPTXFSIZ[%d] @0x%08X : 0x%08X\n",i,(uint32_t)addr,dwc_read_reg32(addr)); ++ } ++} ++ ++/** ++ * Flush a Tx FIFO. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param num Tx FIFO to flush. ++ */ ++void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t *core_if, ++ const int num) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = { .d32 = 0}; ++ int count = 0; ++ ++ DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "Flush Tx FIFO %d\n", num); ++ ++ greset.b.txfflsh = 1; ++ greset.b.txfnum = num; ++ dwc_write_reg32(&global_regs->grstctl, greset.d32); ++ ++ do { ++ greset.d32 = dwc_read_reg32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n", ++ __func__, greset.d32, ++ dwc_read_reg32(&global_regs->gnptxsts)); ++ break; ++ } ++ } ++ while (greset.b.txfflsh == 1); ++ ++ /* Wait for 3 PHY Clocks*/ ++ UDELAY(1); ++} ++ ++/** ++ * Flush Rx FIFO. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t *core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = { .d32 = 0}; ++ int count = 0; ++ ++ DWC_DEBUGPL((DBG_CIL|DBG_PCDV), "%s\n", __func__); ++ /* ++ * ++ */ ++ greset.b.rxfflsh = 1; ++ dwc_write_reg32(&global_regs->grstctl, greset.d32); ++ ++ do { ++ greset.d32 = dwc_read_reg32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__, ++ greset.d32); ++ break; ++ } ++ } ++ while (greset.b.rxfflsh == 1); ++ ++ /* Wait for 3 PHY Clocks*/ ++ UDELAY(1); ++} ++ ++/** ++ * Do core a soft reset of the core. Be careful with this because it ++ * resets all the internal state machines of the core. ++ */ ++void dwc_otg_core_reset(dwc_otg_core_if_t *core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ volatile grstctl_t greset = { .d32 = 0}; ++ int count = 0; ++ ++ DWC_DEBUGPL(DBG_CILV, "%s\n", __func__); ++ /* Wait for AHB master IDLE state. */ ++ do { ++ UDELAY(10); ++ greset.d32 = dwc_read_reg32(&global_regs->grstctl); ++ if (++count > 100000) { ++ DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__, ++ greset.d32); ++ return; ++ } ++ } ++ while (greset.b.ahbidle == 0); ++ ++ /* Core Soft Reset */ ++ count = 0; ++ greset.b.csftrst = 1; ++ dwc_write_reg32(&global_regs->grstctl, greset.d32); ++ do { ++ greset.d32 = dwc_read_reg32(&global_regs->grstctl); ++ if (++count > 10000) { ++ DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n", __func__, ++ greset.d32); ++ break; ++ } ++ } ++ while (greset.b.csftrst == 1); ++ ++ /* Wait for 3 PHY Clocks*/ ++ MDELAY(100); ++} ++ ++ ++ ++/** ++ * Register HCD callbacks. The callbacks are used to start and stop ++ * the HCD for interrupt processing. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param cb the HCD callback structure. ++ * @param p pointer to be passed to callback function (usb_hcd*). ++ */ ++void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t *core_if, ++ dwc_otg_cil_callbacks_t *cb, ++ void *p) ++{ ++ core_if->hcd_cb = cb; ++ cb->p = p; ++} ++ ++/** ++ * Register PCD callbacks. The callbacks are used to start and stop ++ * the PCD for interrupt processing. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param cb the PCD callback structure. ++ * @param p pointer to be passed to callback function (pcd*). ++ */ ++void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t *core_if, ++ dwc_otg_cil_callbacks_t *cb, ++ void *p) ++{ ++ core_if->pcd_cb = cb; ++ cb->p = p; ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function writes isoc data per 1 (micro)frame into tx fifo ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void write_isoc_frame_data(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0}; ++ uint32_t len = 0; ++ uint32_t dwords; ++ ++ ep->xfer_len = ep->data_per_frame; ++ ep->xfer_count = 0; ++ ++ ep_regs = core_if->dev_if->in_ep_regs[ep->num]; ++ ++ len = ep->xfer_len - ep->xfer_count; ++ ++ if (len > ep->maxpacket) { ++ len = ep->maxpacket; ++ } ++ ++ dwords = (len + 3)/4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",ep->num,txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ ep->xfer_count < ep->xfer_len && ++ ep->xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, ep, 0); ++ ++ len = ep->xfer_len - ep->xfer_count; ++ if (len > ep->maxpacket) { ++ len = ep->maxpacket; ++ } ++ ++ dwords = (len + 3)/4; ++ txstatus.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32); ++ } ++} ++ ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ deptsiz_data_t deptsiz = { .d32 = 0 }; ++ depctl_data_t depctl = { .d32 = 0 }; ++ dsts_data_t dsts = { .d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if(ep->is_in) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ ep->xfer_len = ep->data_per_frame; ++ ep->xfer_count = 0; ++ ep->xfer_buff = ep->cur_pkt_addr; ++ ep->dma_addr = ep->cur_pkt_dma_addr; ++ ++ if(ep->is_in) { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.xfersize = ep->xfer_len; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ++ ep->maxpacket; ++ deptsiz.b.mc = deptsiz.b.pktcnt; ++ dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ if (core_if->dma_enable) { ++ dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr); ++ } ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len + (ep->maxpacket - 1)) / ++ ep->maxpacket; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ ++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32); ++ ++ if (core_if->dma_enable) { ++ dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), ++ (uint32_t)ep->dma_addr); ++ } ++ } ++ ++ ++ /** Enable endpoint, clear nak */ ++ ++ depctl.d32 = 0; ++ if(ep->bInterval == 1) { ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ ep->next_frame = dsts.b.soffn + ep->bInterval; ++ ++ if(ep->next_frame & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } else { ++ ep->next_frame += ep->bInterval; ++ ++ if(ep->next_frame & 0x1) { ++ depctl.b.setd1pid = 1; ++ } else { ++ depctl.b.setd0pid = 1; ++ } ++ } ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ dwc_modify_reg32(addr, 0, depctl.d32); ++ depctl.d32 = dwc_read_reg32(addr); ++ ++ if(ep->is_in && core_if->dma_enable == 0) { ++ write_isoc_frame_data(core_if, ep); ++ } ++ ++} ++ ++#endif //DWC_EN_ISOC +diff --git a/drivers/usb/dwc_otg/dwc_otg_cil.h b/drivers/usb/dwc_otg/dwc_otg_cil.h +new file mode 100644 +index 0000000..9507992 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_cil.h +@@ -0,0 +1,1098 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $ ++ * $Revision: 1.2 $ ++ * $Date: 2008-11-21 05:39:15 $ ++ * $Change: 1099526 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_CIL_H__) ++#define __DWC_CIL_H__ ++ ++#include <linux/workqueue.h> ++#include <linux/version.h> ++#include <asm/param.h> ++ ++#include "linux/dwc_otg_plat.h" ++#include "dwc_otg_regs.h" ++#ifdef DEBUG ++#include "linux/timer.h" ++#endif ++ ++/** ++ * @file ++ * This file contains the interface to the Core Interface Layer. ++ */ ++ ++ ++/** Macros defined for DWC OTG HW Release verison */ ++#define OTG_CORE_REV_2_00 0x4F542000 ++#define OTG_CORE_REV_2_60a 0x4F54260A ++#define OTG_CORE_REV_2_71a 0x4F54271A ++#define OTG_CORE_REV_2_72a 0x4F54272A ++ ++/** ++*/ ++typedef struct iso_pkt_info ++{ ++ uint32_t offset; ++ uint32_t length; ++ int32_t status; ++} iso_pkt_info_t; ++/** ++ * The <code>dwc_ep</code> structure represents the state of a single ++ * endpoint when acting in device mode. It contains the data items ++ * needed for an endpoint to be activated and transfer packets. ++ */ ++typedef struct dwc_ep ++{ ++ /** EP number used for register address lookup */ ++ uint8_t num; ++ /** EP direction 0 = OUT */ ++ unsigned is_in : 1; ++ /** EP active. */ ++ unsigned active : 1; ++ ++ /** Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic Tx FIFO ++ If dedicated Tx FIFOs are enabled for all IN Eps - Tx FIFO # FOR IN EPs*/ ++ unsigned tx_fifo_num : 4; ++ /** EP type: 0 - Control, 1 - ISOC, 2 - BULK, 3 - INTR */ ++ unsigned type : 2; ++#define DWC_OTG_EP_TYPE_CONTROL 0 ++#define DWC_OTG_EP_TYPE_ISOC 1 ++#define DWC_OTG_EP_TYPE_BULK 2 ++#define DWC_OTG_EP_TYPE_INTR 3 ++ ++ /** DATA start PID for INTR and BULK EP */ ++ unsigned data_pid_start : 1; ++ /** Frame (even/odd) for ISOC EP */ ++ unsigned even_odd_frame : 1; ++ /** Max Packet bytes */ ++ unsigned maxpacket : 11; ++ ++ /** Max Transfer size */ ++ unsigned maxxfer : 16; ++ ++ /** @name Transfer state */ ++ /** @{ */ ++ ++ /** ++ * Pointer to the beginning of the transfer buffer -- do not modify ++ * during transfer. ++ */ ++ ++ uint32_t dma_addr; ++ ++ uint32_t dma_desc_addr; ++ dwc_otg_dma_desc_t* desc_addr; ++ ++ ++ uint8_t *start_xfer_buff; ++ /** pointer to the transfer buffer */ ++ uint8_t *xfer_buff; ++ /** Number of bytes to transfer */ ++ unsigned xfer_len : 19; ++ /** Number of bytes transferred. */ ++ unsigned xfer_count : 19; ++ /** Sent ZLP */ ++ unsigned sent_zlp : 1; ++ /** Total len for control transfer */ ++ unsigned total_len : 19; ++ ++ /** stall clear flag */ ++ unsigned stall_clear_flag : 1; ++ ++ /** Allocated DMA Desc count */ ++ uint32_t desc_cnt; ++ ++#ifdef DWC_EN_ISOC ++ /** ++ * Variables specific for ISOC EPs ++ * ++ */ ++ /** DMA addresses of ISOC buffers */ ++ uint32_t dma_addr0; ++ uint32_t dma_addr1; ++ ++ uint32_t iso_dma_desc_addr; ++ dwc_otg_dma_desc_t* iso_desc_addr; ++ ++ /** pointer to the transfer buffers */ ++ uint8_t *xfer_buff0; ++ uint8_t *xfer_buff1; ++ ++ /** number of ISOC Buffer is processing */ ++ uint32_t proc_buf_num; ++ /** Interval of ISOC Buffer processing */ ++ uint32_t buf_proc_intrvl; ++ /** Data size for regular frame */ ++ uint32_t data_per_frame; ++ ++ /* todo - pattern data support is to be implemented in the future */ ++ /** Data size for pattern frame */ ++ uint32_t data_pattern_frame; ++ /** Frame number of pattern data */ ++ uint32_t sync_frame; ++ ++ /** bInterval */ ++ uint32_t bInterval; ++ /** ISO Packet number per frame */ ++ uint32_t pkt_per_frm; ++ /** Next frame num for which will be setup DMA Desc */ ++ uint32_t next_frame; ++ /** Number of packets per buffer processing */ ++ uint32_t pkt_cnt; ++ /** Info for all isoc packets */ ++ iso_pkt_info_t *pkt_info; ++ /** current pkt number */ ++ uint32_t cur_pkt; ++ /** current pkt number */ ++ uint8_t *cur_pkt_addr; ++ /** current pkt number */ ++ uint32_t cur_pkt_dma_addr; ++#endif //DWC_EN_ISOC ++/** @} */ ++} dwc_ep_t; ++ ++/* ++ * Reasons for halting a host channel. ++ */ ++typedef enum dwc_otg_halt_status ++{ ++ DWC_OTG_HC_XFER_NO_HALT_STATUS, ++ DWC_OTG_HC_XFER_COMPLETE, ++ DWC_OTG_HC_XFER_URB_COMPLETE, ++ DWC_OTG_HC_XFER_ACK, ++ DWC_OTG_HC_XFER_NAK, ++ DWC_OTG_HC_XFER_NYET, ++ DWC_OTG_HC_XFER_STALL, ++ DWC_OTG_HC_XFER_XACT_ERR, ++ DWC_OTG_HC_XFER_FRAME_OVERRUN, ++ DWC_OTG_HC_XFER_BABBLE_ERR, ++ DWC_OTG_HC_XFER_DATA_TOGGLE_ERR, ++ DWC_OTG_HC_XFER_AHB_ERR, ++ DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE, ++ DWC_OTG_HC_XFER_URB_DEQUEUE ++} dwc_otg_halt_status_e; ++ ++/** ++ * Host channel descriptor. This structure represents the state of a single ++ * host channel when acting in host mode. It contains the data items needed to ++ * transfer packets to an endpoint via a host channel. ++ */ ++typedef struct dwc_hc ++{ ++ /** Host channel number used for register address lookup */ ++ uint8_t hc_num; ++ ++ /** Device to access */ ++ unsigned dev_addr : 7; ++ ++ /** EP to access */ ++ unsigned ep_num : 4; ++ ++ /** EP direction. 0: OUT, 1: IN */ ++ unsigned ep_is_in : 1; ++ ++ /** ++ * EP speed. ++ * One of the following values: ++ * - DWC_OTG_EP_SPEED_LOW ++ * - DWC_OTG_EP_SPEED_FULL ++ * - DWC_OTG_EP_SPEED_HIGH ++ */ ++ unsigned speed : 2; ++#define DWC_OTG_EP_SPEED_LOW 0 ++#define DWC_OTG_EP_SPEED_FULL 1 ++#define DWC_OTG_EP_SPEED_HIGH 2 ++ ++ /** ++ * Endpoint type. ++ * One of the following values: ++ * - DWC_OTG_EP_TYPE_CONTROL: 0 ++ * - DWC_OTG_EP_TYPE_ISOC: 1 ++ * - DWC_OTG_EP_TYPE_BULK: 2 ++ * - DWC_OTG_EP_TYPE_INTR: 3 ++ */ ++ unsigned ep_type : 2; ++ ++ /** Max packet size in bytes */ ++ unsigned max_packet : 11; ++ ++ /** ++ * PID for initial transaction. ++ * 0: DATA0,<br> ++ * 1: DATA2,<br> ++ * 2: DATA1,<br> ++ * 3: MDATA (non-Control EP), ++ * SETUP (Control EP) ++ */ ++ unsigned data_pid_start : 2; ++#define DWC_OTG_HC_PID_DATA0 0 ++#define DWC_OTG_HC_PID_DATA2 1 ++#define DWC_OTG_HC_PID_DATA1 2 ++#define DWC_OTG_HC_PID_MDATA 3 ++#define DWC_OTG_HC_PID_SETUP 3 ++ ++ /** Number of periodic transactions per (micro)frame */ ++ unsigned multi_count: 2; ++ ++ /** @name Transfer State */ ++ /** @{ */ ++ ++ /** Pointer to the current transfer buffer position. */ ++ uint8_t *xfer_buff; ++ /** Total number of bytes to transfer. */ ++ uint32_t xfer_len; ++ /** Number of bytes transferred so far. */ ++ uint32_t xfer_count; ++ /** Packet count at start of transfer.*/ ++ uint16_t start_pkt_count; ++ ++ /** ++ * Flag to indicate whether the transfer has been started. Set to 1 if ++ * it has been started, 0 otherwise. ++ */ ++ uint8_t xfer_started; ++ ++ /** ++ * Set to 1 to indicate that a PING request should be issued on this ++ * channel. If 0, process normally. ++ */ ++ uint8_t do_ping; ++ ++ /** ++ * Set to 1 to indicate that the error count for this transaction is ++ * non-zero. Set to 0 if the error count is 0. ++ */ ++ uint8_t error_state; ++ ++ /** ++ * Set to 1 to indicate that this channel should be halted the next ++ * time a request is queued for the channel. This is necessary in ++ * slave mode if no request queue space is available when an attempt ++ * is made to halt the channel. ++ */ ++ uint8_t halt_on_queue; ++ ++ /** ++ * Set to 1 if the host channel has been halted, but the core is not ++ * finished flushing queued requests. Otherwise 0. ++ */ ++ uint8_t halt_pending; ++ ++ /** ++ * Reason for halting the host channel. ++ */ ++ dwc_otg_halt_status_e halt_status; ++ ++ /* ++ * Split settings for the host channel ++ */ ++ uint8_t do_split; /**< Enable split for the channel */ ++ uint8_t complete_split; /**< Enable complete split */ ++ uint8_t hub_addr; /**< Address of high speed hub */ ++ ++ uint8_t port_addr; /**< Port of the low/full speed device */ ++ /** Split transaction position ++ * One of the following values: ++ * - DWC_HCSPLIT_XACTPOS_MID ++ * - DWC_HCSPLIT_XACTPOS_BEGIN ++ * - DWC_HCSPLIT_XACTPOS_END ++ * - DWC_HCSPLIT_XACTPOS_ALL */ ++ uint8_t xact_pos; ++ ++ /** Set when the host channel does a short read. */ ++ uint8_t short_read; ++ ++ /** ++ * Number of requests issued for this channel since it was assigned to ++ * the current transfer (not counting PINGs). ++ */ ++ uint8_t requests; ++ ++ /** ++ * Queue Head for the transfer being processed by this channel. ++ */ ++ struct dwc_otg_qh *qh; ++ ++ /** @} */ ++ ++ /** Entry in list of host channels. */ ++ struct list_head hc_list_entry; ++} dwc_hc_t; ++ ++/** ++ * The following parameters may be specified when starting the module. These ++ * parameters define how the DWC_otg controller should be configured. ++ * Parameter values are passed to the CIL initialization function ++ * dwc_otg_cil_init. ++ */ ++typedef struct dwc_otg_core_params ++{ ++ int32_t opt; ++#define dwc_param_opt_default 1 ++ ++ /** ++ * Specifies the OTG capabilities. The driver will automatically ++ * detect the value for this parameter if none is specified. ++ * 0 - HNP and SRP capable (default) ++ * 1 - SRP Only capable ++ * 2 - No HNP/SRP capable ++ */ ++ int32_t otg_cap; ++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0 ++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1 ++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 ++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ++ ++ /** ++ * Specifies whether to use slave or DMA mode for accessing the data ++ * FIFOs. The driver will automatically detect the value for this ++ * parameter if none is specified. ++ * 0 - Slave ++ * 1 - DMA (default, if available) ++ */ ++ int32_t dma_enable; ++#define dwc_param_dma_enable_default 1 ++ ++ /** ++ * When DMA mode is enabled specifies whether to use address DMA or DMA Descritor mode for accessing the data ++ * FIFOs in device mode. The driver will automatically detect the value for this ++ * parameter if none is specified. ++ * 0 - address DMA ++ * 1 - DMA Descriptor(default, if available) ++ */ ++ int32_t dma_desc_enable; ++#define dwc_param_dma_desc_enable_default 0 ++ /** The DMA Burst size (applicable only for External DMA ++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++ */ ++ int32_t dma_burst_size; /* Translate this to GAHBCFG values */ ++#define dwc_param_dma_burst_size_default 32 ++ ++ /** ++ * Specifies the maximum speed of operation in host and device mode. ++ * The actual speed depends on the speed of the attached device and ++ * the value of phy_type. The actual speed depends on the speed of the ++ * attached device. ++ * 0 - High Speed (default) ++ * 1 - Full Speed ++ */ ++ int32_t speed; ++#define dwc_param_speed_default 0 ++#define DWC_SPEED_PARAM_HIGH 0 ++#define DWC_SPEED_PARAM_FULL 1 ++ ++ /** Specifies whether low power mode is supported when attached ++ * to a Full Speed or Low Speed device in host mode. ++ * 0 - Don't support low power mode (default) ++ * 1 - Support low power mode ++ */ ++ int32_t host_support_fs_ls_low_power; ++#define dwc_param_host_support_fs_ls_low_power_default 0 ++ ++ /** Specifies the PHY clock rate in low power mode when connected to a ++ * Low Speed device in host mode. This parameter is applicable only if ++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS ++ * then defaults to 6 MHZ otherwise 48 MHZ. ++ * ++ * 0 - 48 MHz ++ * 1 - 6 MHz ++ */ ++ int32_t host_ls_low_power_phy_clk; ++#define dwc_param_host_ls_low_power_phy_clk_default 0 ++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0 ++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1 ++ ++ /** ++ * 0 - Use cC FIFO size parameters ++ * 1 - Allow dynamic FIFO sizing (default) ++ */ ++ int32_t enable_dynamic_fifo; ++#define dwc_param_enable_dynamic_fifo_default 1 ++ ++ /** Total number of 4-byte words in the data FIFO memory. This ++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic ++ * Tx FIFOs. ++ * 32 to 32768 (default 8192) ++ * Note: The total FIFO memory depth in the FPGA configuration is 8192. ++ */ ++ int32_t data_fifo_size; ++#define dwc_param_data_fifo_size_default 8192 ++ ++ /** Number of 4-byte words in the Rx FIFO in device mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1064) ++ */ ++ int32_t dev_rx_fifo_size; ++#define dwc_param_dev_rx_fifo_size_default 1064 ++ ++ /** Number of 4-byte words in the non-periodic Tx FIFO in device mode ++ * when dynamic FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t dev_nperio_tx_fifo_size; ++#define dwc_param_dev_nperio_tx_fifo_size_default 1024 ++ ++ /** Number of 4-byte words in each of the periodic Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++ uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++#define dwc_param_dev_perio_tx_fifo_size_default 256 ++ ++ /** Number of 4-byte words in the Rx FIFO in host mode when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_rx_fifo_size; ++#define dwc_param_host_rx_fifo_size_default 1024 ++ ++ /** Number of 4-byte words in the non-periodic Tx FIFO in host mode ++ * when Dynamic FIFO sizing is enabled in the core. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_nperio_tx_fifo_size; ++#define dwc_param_host_nperio_tx_fifo_size_default 1024 ++ ++ /** Number of 4-byte words in the host periodic Tx FIFO when dynamic ++ * FIFO sizing is enabled. ++ * 16 to 32768 (default 1024) ++ */ ++ int32_t host_perio_tx_fifo_size; ++#define dwc_param_host_perio_tx_fifo_size_default 1024 ++ ++ /** The maximum transfer size supported in bytes. ++ * 2047 to 65,535 (default 65,535) ++ */ ++ int32_t max_transfer_size; ++#define dwc_param_max_transfer_size_default 65535 ++ ++ /** The maximum number of packets in a transfer. ++ * 15 to 511 (default 511) ++ */ ++ int32_t max_packet_count; ++#define dwc_param_max_packet_count_default 511 ++ ++ /** The number of host channel registers to use. ++ * 1 to 16 (default 12) ++ * Note: The FPGA configuration supports a maximum of 12 host channels. ++ */ ++ int32_t host_channels; ++#define dwc_param_host_channels_default 12 ++ ++ /** The number of endpoints in addition to EP0 available for device ++ * mode operations. ++ * 1 to 15 (default 6 IN and OUT) ++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT ++ * endpoints in addition to EP0. ++ */ ++ int32_t dev_endpoints; ++#define dwc_param_dev_endpoints_default 6 ++ ++ /** ++ * Specifies the type of PHY interface to use. By default, the driver ++ * will automatically detect the phy_type. ++ * ++ * 0 - Full Speed PHY ++ * 1 - UTMI+ (default) ++ * 2 - ULPI ++ */ ++ int32_t phy_type; ++#define DWC_PHY_TYPE_PARAM_FS 0 ++#define DWC_PHY_TYPE_PARAM_UTMI 1 ++#define DWC_PHY_TYPE_PARAM_ULPI 2 ++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI ++ ++ /** ++ * Specifies the UTMI+ Data Width. This parameter is ++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI ++ * PHY_TYPE, this parameter indicates the data width between ++ * the MAC and the ULPI Wrapper.) Also, this parameter is ++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set ++ * to "8 and 16 bits", meaning that the core has been ++ * configured to work at either data path width. ++ * ++ * 8 or 16 bits (default 16) ++ */ ++ int32_t phy_utmi_width; ++#define dwc_param_phy_utmi_width_default 16 ++ ++ /** ++ * Specifies whether the ULPI operates at double or single ++ * data rate. This parameter is only applicable if PHY_TYPE is ++ * ULPI. ++ * ++ * 0 - single data rate ULPI interface with 8 bit wide data ++ * bus (default) ++ * 1 - double data rate ULPI interface with 4 bit wide data ++ * bus ++ */ ++ int32_t phy_ulpi_ddr; ++#define dwc_param_phy_ulpi_ddr_default 0 ++ ++ /** ++ * Specifies whether to use the internal or external supply to ++ * drive the vbus with a ULPI phy. ++ */ ++ int32_t phy_ulpi_ext_vbus; ++#define DWC_PHY_ULPI_INTERNAL_VBUS 0 ++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1 ++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS ++ ++ /** ++ * Specifies whether to use the I2Cinterface for full speed PHY. This ++ * parameter is only applicable if PHY_TYPE is FS. ++ * 0 - No (default) ++ * 1 - Yes ++ */ ++ int32_t i2c_enable; ++#define dwc_param_i2c_enable_default 0 ++ ++ int32_t ulpi_fs_ls; ++#define dwc_param_ulpi_fs_ls_default 0 ++ ++ int32_t ts_dline; ++#define dwc_param_ts_dline_default 0 ++ ++ /** ++ * Specifies whether dedicated transmit FIFOs are ++ * enabled for non periodic IN endpoints in device mode ++ * 0 - No ++ * 1 - Yes ++ */ ++ int32_t en_multiple_tx_fifo; ++#define dwc_param_en_multiple_tx_fifo_default 1 ++ ++ /** Number of 4-byte words in each of the Tx FIFOs in device ++ * mode when dynamic FIFO sizing is enabled. ++ * 4 to 768 (default 256) ++ */ ++ uint32_t dev_tx_fifo_size[MAX_TX_FIFOS]; ++#define dwc_param_dev_tx_fifo_size_default 256 ++ ++ /** Thresholding enable flag- ++ * bit 0 - enable non-ISO Tx thresholding ++ * bit 1 - enable ISO Tx thresholding ++ * bit 2 - enable Rx thresholding ++ */ ++ uint32_t thr_ctl; ++#define dwc_param_thr_ctl_default 0 ++ ++ /** Thresholding length for Tx ++ * FIFOs in 32 bit DWORDs ++ */ ++ uint32_t tx_thr_length; ++#define dwc_param_tx_thr_length_default 64 ++ ++ /** Thresholding length for Rx ++ * FIFOs in 32 bit DWORDs ++ */ ++ uint32_t rx_thr_length; ++#define dwc_param_rx_thr_length_default 64 ++ ++ /** Per Transfer Interrupt ++ * mode enable flag ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ uint32_t pti_enable; ++#define dwc_param_pti_enable_default 0 ++ ++ /** Molti Processor Interrupt ++ * mode enable flag ++ * 1 - Enabled ++ * 0 - Disabled ++ */ ++ uint32_t mpi_enable; ++#define dwc_param_mpi_enable_default 0 ++ ++} dwc_otg_core_params_t; ++ ++#ifdef DEBUG ++struct dwc_otg_core_if; ++typedef struct hc_xfer_info ++{ ++ struct dwc_otg_core_if *core_if; ++ dwc_hc_t *hc; ++} hc_xfer_info_t; ++#endif ++ ++/** ++ * The <code>dwc_otg_core_if</code> structure contains information needed to manage ++ * the DWC_otg controller acting in either host or device mode. It ++ * represents the programming view of the controller as a whole. ++ */ ++typedef struct dwc_otg_core_if ++{ ++ /** Parameters that define how the core should be configured.*/ ++ dwc_otg_core_params_t *core_params; ++ ++ /** Core Global registers starting at offset 000h. */ ++ dwc_otg_core_global_regs_t *core_global_regs; ++ ++ /** Device-specific information */ ++ dwc_otg_dev_if_t *dev_if; ++ /** Host-specific information */ ++ dwc_otg_host_if_t *host_if; ++ ++ /** Value from SNPSID register */ ++ uint32_t snpsid; ++ ++ /* ++ * Set to 1 if the core PHY interface bits in USBCFG have been ++ * initialized. ++ */ ++ uint8_t phy_init_done; ++ ++ /* ++ * SRP Success flag, set by srp success interrupt in FS I2C mode ++ */ ++ uint8_t srp_success; ++ uint8_t srp_timer_started; ++ ++ /* Common configuration information */ ++ /** Power and Clock Gating Control Register */ ++ volatile uint32_t *pcgcctl; ++#define DWC_OTG_PCGCCTL_OFFSET 0xE00 ++ ++ /** Push/pop addresses for endpoints or host channels.*/ ++ uint32_t *data_fifo[MAX_EPS_CHANNELS]; ++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000 ++#define DWC_OTG_DATA_FIFO_SIZE 0x1000 ++ ++ /** Total RAM for FIFOs (Bytes) */ ++ uint16_t total_fifo_size; ++ /** Size of Rx FIFO (Bytes) */ ++ uint16_t rx_fifo_size; ++ /** Size of Non-periodic Tx FIFO (Bytes) */ ++ uint16_t nperio_tx_fifo_size; ++ ++ ++ /** 1 if DMA is enabled, 0 otherwise. */ ++ uint8_t dma_enable; ++ ++ /** 1 if Descriptor DMA mode is enabled, 0 otherwise. */ ++ uint8_t dma_desc_enable; ++ ++ /** 1 if PTI Enhancement mode is enabled, 0 otherwise. */ ++ uint8_t pti_enh_enable; ++ ++ /** 1 if MPI Enhancement mode is enabled, 0 otherwise. */ ++ uint8_t multiproc_int_enable; ++ ++ /** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */ ++ uint8_t en_multiple_tx_fifo; ++ ++ /** Set to 1 if multiple packets of a high-bandwidth transfer is in ++ * process of being queued */ ++ uint8_t queuing_high_bandwidth; ++ ++ /** Hardware Configuration -- stored here for convenience.*/ ++ hwcfg1_data_t hwcfg1; ++ hwcfg2_data_t hwcfg2; ++ hwcfg3_data_t hwcfg3; ++ hwcfg4_data_t hwcfg4; ++ ++ /** Host and Device Configuration -- stored here for convenience.*/ ++ hcfg_data_t hcfg; ++ dcfg_data_t dcfg; ++ ++ /** The operational State, during transations ++ * (a_host>>a_peripherial and b_device=>b_host) this may not ++ * match the core but allows the software to determine ++ * transitions. ++ */ ++ uint8_t op_state; ++ ++ /** ++ * Set to 1 if the HCD needs to be restarted on a session request ++ * interrupt. This is required if no connector ID status change has ++ * occurred since the HCD was last disconnected. ++ */ ++ uint8_t restart_hcd_on_session_req; ++ ++ /** HCD callbacks */ ++ /** A-Device is a_host */ ++#define A_HOST (1) ++ /** A-Device is a_suspend */ ++#define A_SUSPEND (2) ++ /** A-Device is a_peripherial */ ++#define A_PERIPHERAL (3) ++ /** B-Device is operating as a Peripheral. */ ++#define B_PERIPHERAL (4) ++ /** B-Device is operating as a Host. */ ++#define B_HOST (5) ++ ++ /** HCD callbacks */ ++ struct dwc_otg_cil_callbacks *hcd_cb; ++ /** PCD callbacks */ ++ struct dwc_otg_cil_callbacks *pcd_cb; ++ ++ /** Device mode Periodic Tx FIFO Mask */ ++ uint32_t p_tx_msk; ++ /** Device mode Periodic Tx FIFO Mask */ ++ uint32_t tx_msk; ++ ++ /** Workqueue object used for handling several interrupts */ ++ struct workqueue_struct *wq_otg; ++ ++ /** Work object used for handling "Connector ID Status Change" Interrupt */ ++ struct work_struct w_conn_id; ++ ++ /** Work object used for handling "Wakeup Detected" Interrupt */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ struct work_struct w_wkp; ++#else ++ struct delayed_work w_wkp; ++#endif ++ ++#ifdef DEBUG ++ uint32_t start_hcchar_val[MAX_EPS_CHANNELS]; ++ ++ hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS]; ++ struct timer_list hc_xfer_timer[MAX_EPS_CHANNELS]; ++ ++ uint32_t hfnum_7_samples; ++ uint64_t hfnum_7_frrem_accum; ++ uint32_t hfnum_0_samples; ++ uint64_t hfnum_0_frrem_accum; ++ uint32_t hfnum_other_samples; ++ uint64_t hfnum_other_frrem_accum; ++#endif ++ ++ ++} dwc_otg_core_if_t; ++ ++/*We must clear S3C24XX_EINTPEND external interrupt register ++ * because after clearing in this register trigerred IRQ from ++ * H/W core in kernel interrupt can be occured again before OTG ++ * handlers clear all IRQ sources of Core registers because of ++ * timing latencies and Low Level IRQ Type. ++ */ ++ ++#ifdef CONFIG_MACH_IPMATE ++#define S3C2410X_CLEAR_EINTPEND() \ ++do { \ ++ if (!dwc_otg_read_core_intr(core_if)) { \ ++ __raw_writel(1UL << 11,S3C24XX_EINTPEND); \ ++ } \ ++} while (0) ++#else ++#define S3C2410X_CLEAR_EINTPEND() do { } while (0) ++#endif ++ ++/* ++ * The following functions are functions for works ++ * using during handling some interrupts ++ */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ ++extern void w_conn_id_status_change(void *p); ++extern void w_wakeup_detected(void *p); ++ ++#else ++ ++extern void w_conn_id_status_change(struct work_struct *p); ++extern void w_wakeup_detected(struct work_struct *p); ++ ++#endif ++ ++ ++/* ++ * The following functions support initialization of the CIL driver component ++ * and the DWC_otg controller. ++ */ ++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t *_reg_base_addr, ++ dwc_otg_core_params_t *_core_params); ++extern void dwc_otg_cil_remove(dwc_otg_core_if_t *_core_if); ++extern void dwc_otg_core_init(dwc_otg_core_if_t *_core_if); ++extern void dwc_otg_core_host_init(dwc_otg_core_if_t *_core_if); ++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t *_core_if); ++extern void dwc_otg_enable_global_interrupts( dwc_otg_core_if_t *_core_if ); ++extern void dwc_otg_disable_global_interrupts( dwc_otg_core_if_t *_core_if ); ++ ++/** @name Device CIL Functions ++ * The following functions support managing the DWC_otg controller in device ++ * mode. ++ */ ++/**@{*/ ++extern void dwc_otg_wakeup(dwc_otg_core_if_t *_core_if); ++extern void dwc_otg_read_setup_packet (dwc_otg_core_if_t *_core_if, uint32_t *_dest); ++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t *_core_if); ++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); ++extern void dwc_otg_ep_activate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); ++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); ++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); ++extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); ++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); ++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); ++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep, int _dma); ++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); ++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t *_core_if, dwc_ep_t *_ep); ++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t *_core_if); ++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t *_core_if); ++extern void dwc_otg_dump_spram(dwc_otg_core_if_t *_core_if); ++#ifdef DWC_EN_ISOC ++extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep); ++extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep); ++#endif //DWC_EN_ISOC ++/**@}*/ ++ ++/** @name Host CIL Functions ++ * The following functions support managing the DWC_otg controller in host ++ * mode. ++ */ ++/**@{*/ ++extern void dwc_otg_hc_init(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); ++extern void dwc_otg_hc_halt(dwc_otg_core_if_t *_core_if, ++ dwc_hc_t *_hc, ++ dwc_otg_halt_status_e _halt_status); ++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); ++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); ++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); ++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); ++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc); ++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t *_core_if); ++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t *_core_if); ++ ++/** ++ * This function Reads HPRT0 in preparation to modify. It keeps the ++ * WC bits 0 so that if they are read as 1, they won't clear when you ++ * write it back ++ */ ++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t *_core_if) ++{ ++ hprt0_data_t hprt0; ++ hprt0.d32 = dwc_read_reg32(_core_if->host_if->hprt0); ++ hprt0.b.prtena = 0; ++ hprt0.b.prtconndet = 0; ++ hprt0.b.prtenchng = 0; ++ hprt0.b.prtovrcurrchng = 0; ++ return hprt0.d32; ++} ++ ++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t *_core_if); ++/**@}*/ ++ ++/** @name Common CIL Functions ++ * The following functions support managing the DWC_otg controller in either ++ * device or host mode. ++ */ ++/**@{*/ ++ ++extern void dwc_otg_read_packet(dwc_otg_core_if_t *core_if, ++ uint8_t *dest, ++ uint16_t bytes); ++ ++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t *_core_if); ++ ++extern void dwc_otg_flush_tx_fifo( dwc_otg_core_if_t *_core_if, ++ const int _num ); ++extern void dwc_otg_flush_rx_fifo( dwc_otg_core_if_t *_core_if ); ++extern void dwc_otg_core_reset( dwc_otg_core_if_t *_core_if ); ++ ++extern dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count); ++extern void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count); ++ ++/** ++ * This function returns the Core Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t *_core_if) ++{ ++ return (dwc_read_reg32(&_core_if->core_global_regs->gintsts) & ++ dwc_read_reg32(&_core_if->core_global_regs->gintmsk)); ++} ++ ++/** ++ * This function returns the OTG Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_otg_intr (dwc_otg_core_if_t *_core_if) ++{ ++ return (dwc_read_reg32 (&_core_if->core_global_regs->gotgint)); ++} ++ ++/** ++ * This function reads the Device All Endpoints Interrupt register and ++ * returns the IN endpoint interrupt bits. ++ */ ++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *core_if) ++{ ++ uint32_t v; ++ ++ if(core_if->multiproc_int_enable) { ++ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) & ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk); ++ } else { ++ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) & ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk); ++ } ++ return (v & 0xffff); ++ ++} ++ ++/** ++ * This function reads the Device All Endpoints Interrupt register and ++ * returns the OUT endpoint interrupt bits. ++ */ ++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *core_if) ++{ ++ uint32_t v; ++ ++ if(core_if->multiproc_int_enable) { ++ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachint) & ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->deachintmsk); ++ } else { ++ v = dwc_read_reg32(&core_if->dev_if->dev_global_regs->daint) & ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->daintmsk); ++ } ++ ++ return ((v & 0xffff0000) >> 16); ++} ++ ++/** ++ * This function returns the Device IN EP Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t *core_if, ++ dwc_ep_t *ep) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ uint32_t v, msk, emp; ++ ++ if(core_if->multiproc_int_enable) { ++ msk = dwc_read_reg32(&dev_if->dev_global_regs->diepeachintmsk[ep->num]); ++ emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk); ++ msk |= ((emp >> ep->num) & 0x1) << 7; ++ v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; ++ } else { ++ msk = dwc_read_reg32(&dev_if->dev_global_regs->diepmsk); ++ emp = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk); ++ msk |= ((emp >> ep->num) & 0x1) << 7; ++ v = dwc_read_reg32(&dev_if->in_ep_regs[ep->num]->diepint) & msk; ++ } ++ ++ ++ return v; ++} ++/** ++ * This function returns the Device OUT EP Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *_core_if, ++ dwc_ep_t *_ep) ++{ ++ dwc_otg_dev_if_t *dev_if = _core_if->dev_if; ++ uint32_t v; ++ doepmsk_data_t msk = { .d32 = 0 }; ++ ++ if(_core_if->multiproc_int_enable) { ++ msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepeachintmsk[_ep->num]); ++ if(_core_if->pti_enh_enable) { ++ msk.b.pktdrpsts = 1; ++ } ++ v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32; ++ } else { ++ msk.d32 = dwc_read_reg32(&dev_if->dev_global_regs->doepmsk); ++ if(_core_if->pti_enh_enable) { ++ msk.b.pktdrpsts = 1; ++ } ++ v = dwc_read_reg32( &dev_if->out_ep_regs[_ep->num]->doepint) & msk.d32; ++ } ++ return v; ++} ++ ++/** ++ * This function returns the Host All Channel Interrupt register ++ */ ++static inline uint32_t dwc_otg_read_host_all_channels_intr (dwc_otg_core_if_t *_core_if) ++{ ++ return (dwc_read_reg32 (&_core_if->host_if->host_global_regs->haint)); ++} ++ ++static inline uint32_t dwc_otg_read_host_channel_intr (dwc_otg_core_if_t *_core_if, dwc_hc_t *_hc) ++{ ++ return (dwc_read_reg32 (&_core_if->host_if->hc_regs[_hc->hc_num]->hcint)); ++} ++ ++ ++/** ++ * This function returns the mode of the operation, host or device. ++ * ++ * @return 0 - Device Mode, 1 - Host Mode ++ */ ++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t *_core_if) ++{ ++ return (dwc_read_reg32( &_core_if->core_global_regs->gintsts ) & 0x1); ++} ++ ++static inline uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t *_core_if) ++{ ++ return (dwc_otg_mode(_core_if) != DWC_HOST_MODE); ++} ++static inline uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t *_core_if) ++{ ++ return (dwc_otg_mode(_core_if) == DWC_HOST_MODE); ++} ++ ++extern int32_t dwc_otg_handle_common_intr( dwc_otg_core_if_t *_core_if ); ++ ++ ++/**@}*/ ++ ++/** ++ * DWC_otg CIL callback structure. This structure allows the HCD and ++ * PCD to register functions used for starting and stopping the PCD ++ * and HCD for role change on for a DRD. ++ */ ++typedef struct dwc_otg_cil_callbacks ++{ ++ /** Start function for role change */ ++ int (*start) (void *_p); ++ /** Stop Function for role change */ ++ int (*stop) (void *_p); ++ /** Disconnect Function for role change */ ++ int (*disconnect) (void *_p); ++ /** Resume/Remote wakeup Function */ ++ int (*resume_wakeup) (void *_p); ++ /** Suspend function */ ++ int (*suspend) (void *_p); ++ /** Session Start (SRP) */ ++ int (*session_start) (void *_p); ++ /** Pointer passed to start() and stop() */ ++ void *p; ++} dwc_otg_cil_callbacks_t; ++ ++extern void dwc_otg_cil_register_pcd_callbacks( dwc_otg_core_if_t *_core_if, ++ dwc_otg_cil_callbacks_t *_cb, ++ void *_p); ++extern void dwc_otg_cil_register_hcd_callbacks( dwc_otg_core_if_t *_core_if, ++ dwc_otg_cil_callbacks_t *_cb, ++ void *_p); ++ ++#endif ++ +diff --git a/drivers/usb/dwc_otg/dwc_otg_cil_intr.c b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c +new file mode 100644 +index 0000000..61b17b3 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_cil_intr.c +@@ -0,0 +1,750 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $ ++ * $Revision: 1.2 $ ++ * $Date: 2008-11-21 05:39:15 $ ++ * $Change: 1065567 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * ++ * The Core Interface Layer provides basic services for accessing and ++ * managing the DWC_otg hardware. These services are used by both the ++ * Host Controller Driver and the Peripheral Controller Driver. ++ * ++ * This file contains the Common Interrupt handlers. ++ */ ++#include "linux/dwc_otg_plat.h" ++#include "dwc_otg_regs.h" ++#include "dwc_otg_cil.h" ++ ++#ifdef DEBUG ++inline const char *op_state_str(dwc_otg_core_if_t *core_if) ++{ ++ return (core_if->op_state==A_HOST?"a_host": ++ (core_if->op_state==A_SUSPEND?"a_suspend": ++ (core_if->op_state==A_PERIPHERAL?"a_peripheral": ++ (core_if->op_state==B_PERIPHERAL?"b_peripheral": ++ (core_if->op_state==B_HOST?"b_host": ++ "unknown"))))); ++} ++#endif ++ ++/** This function will log a debug message ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_mode_mismatch_intr (dwc_otg_core_if_t *core_if) ++{ ++ gintsts_data_t gintsts; ++ DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n", ++ dwc_otg_mode(core_if) ? "Host" : "Device"); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.modemismatch = 1; ++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++ ++/** Start the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void hcd_start(dwc_otg_core_if_t *core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->start) { ++ core_if->hcd_cb->start(core_if->hcd_cb->p); ++ } ++} ++/** Stop the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void hcd_stop(dwc_otg_core_if_t *core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->stop) { ++ core_if->hcd_cb->stop(core_if->hcd_cb->p); ++ } ++} ++/** Disconnect the HCD. Helper function for using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void hcd_disconnect(dwc_otg_core_if_t *core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->disconnect) { ++ core_if->hcd_cb->disconnect(core_if->hcd_cb->p); ++ } ++} ++/** Inform the HCD the a New Session has begun. Helper function for ++ * using the HCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void hcd_session_start(dwc_otg_core_if_t *core_if) ++{ ++ if (core_if->hcd_cb && core_if->hcd_cb->session_start) { ++ core_if->hcd_cb->session_start(core_if->hcd_cb->p); ++ } ++} ++ ++/** Start the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void pcd_start(dwc_otg_core_if_t *core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->start) { ++ core_if->pcd_cb->start(core_if->pcd_cb->p); ++ } ++} ++/** Stop the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void pcd_stop(dwc_otg_core_if_t *core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->stop) { ++ core_if->pcd_cb->stop(core_if->pcd_cb->p); ++ } ++} ++/** Suspend the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void pcd_suspend(dwc_otg_core_if_t *core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->suspend) { ++ core_if->pcd_cb->suspend(core_if->pcd_cb->p); ++ } ++} ++/** Resume the PCD. Helper function for using the PCD callbacks. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static inline void pcd_resume(dwc_otg_core_if_t *core_if) ++{ ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++} ++ ++/** ++ * This function handles the OTG Interrupts. It reads the OTG ++ * Interrupt Register (GOTGINT) to determine what interrupt has ++ * occurred. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t *core_if) ++{ ++ dwc_otg_core_global_regs_t *global_regs = ++ core_if->core_global_regs; ++ gotgint_data_t gotgint; ++ gotgctl_data_t gotgctl; ++ gintmsk_data_t gintmsk; ++ ++ gotgint.d32 = dwc_read_reg32(&global_regs->gotgint); ++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); ++ DWC_DEBUGPL(DBG_CIL, "gotgctl=%08x\n", gotgctl.d32); ++ ++ if (gotgint.b.sesenddet) { ++ DWC_DEBUGPL(DBG_ANY, "OTG Interrupt: " ++ "Session End Detected++ (%s)\n", ++ op_state_str(core_if)); ++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); ++ ++ if (core_if->op_state == B_HOST) { ++ pcd_start(core_if); ++ core_if->op_state = B_PERIPHERAL; ++ } else { ++ /* If not B_HOST and Device HNP still set. HNP ++ * Did not succeed!*/ ++ if (gotgctl.b.devhnpen) { ++ DWC_DEBUGPL(DBG_ANY, "Session End Detected\n"); ++ DWC_ERROR("Device Not Connected/Responding!\n"); ++ } ++ ++ /* If Session End Detected the B-Cable has ++ * been disconnected. */ ++ /* Reset PCD and Gadget driver to a ++ * clean state. */ ++ pcd_stop(core_if); ++ } ++ gotgctl.d32 = 0; ++ gotgctl.b.devhnpen = 1; ++ dwc_modify_reg32(&global_regs->gotgctl, ++ gotgctl.d32, 0); ++ } ++ if (gotgint.b.sesreqsucstschng) { ++ DWC_DEBUGPL(DBG_ANY, " OTG Interrupt: " ++ "Session Reqeust Success Status Change++\n"); ++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); ++ if (gotgctl.b.sesreqscs) { ++ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && ++ (core_if->core_params->i2c_enable)) { ++ core_if->srp_success = 1; ++ } ++ else { ++ pcd_resume(core_if); ++ /* Clear Session Request */ ++ gotgctl.d32 = 0; ++ gotgctl.b.sesreq = 1; ++ dwc_modify_reg32(&global_regs->gotgctl, ++ gotgctl.d32, 0); ++ } ++ } ++ } ++ if (gotgint.b.hstnegsucstschng) { ++ /* Print statements during the HNP interrupt handling ++ * can cause it to fail.*/ ++ gotgctl.d32 = dwc_read_reg32(&global_regs->gotgctl); ++ if (gotgctl.b.hstnegscs) { ++ if (dwc_otg_is_host_mode(core_if)) { ++ core_if->op_state = B_HOST; ++ /* ++ * Need to disable SOF interrupt immediately. ++ * When switching from device to host, the PCD ++ * interrupt handler won't handle the ++ * interrupt if host mode is already set. The ++ * HCD interrupt handler won't get called if ++ * the HCD state is HALT. This means that the ++ * interrupt does not get handled and Linux ++ * complains loudly. ++ */ ++ gintmsk.d32 = 0; ++ gintmsk.b.sofintr = 1; ++ dwc_modify_reg32(&global_regs->gintmsk, ++ gintmsk.d32, 0); ++ pcd_stop(core_if); ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ hcd_start(core_if); ++ core_if->op_state = B_HOST; ++ } ++ } else { ++ gotgctl.d32 = 0; ++ gotgctl.b.hnpreq = 1; ++ gotgctl.b.devhnpen = 1; ++ dwc_modify_reg32(&global_regs->gotgctl, ++ gotgctl.d32, 0); ++ DWC_DEBUGPL(DBG_ANY, "HNP Failed\n"); ++ DWC_ERROR("Device Not Connected/Responding\n"); ++ } ++ } ++ if (gotgint.b.hstnegdet) { ++ /* The disconnect interrupt is set at the same time as ++ * Host Negotiation Detected. During the mode ++ * switch all interrupts are cleared so the disconnect ++ * interrupt handler will not get executed. ++ */ ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Host Negotiation Detected++ (%s)\n", ++ (dwc_otg_is_host_mode(core_if)?"Host":"Device")); ++ if (dwc_otg_is_device_mode(core_if)){ ++ DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n", core_if->op_state); ++ hcd_disconnect(core_if); ++ pcd_start(core_if); ++ core_if->op_state = A_PERIPHERAL; ++ } else { ++ /* ++ * Need to disable SOF interrupt immediately. When ++ * switching from device to host, the PCD interrupt ++ * handler won't handle the interrupt if host mode is ++ * already set. The HCD interrupt handler won't get ++ * called if the HCD state is HALT. This means that ++ * the interrupt does not get handled and Linux ++ * complains loudly. ++ */ ++ gintmsk.d32 = 0; ++ gintmsk.b.sofintr = 1; ++ dwc_modify_reg32(&global_regs->gintmsk, ++ gintmsk.d32, 0); ++ pcd_stop(core_if); ++ hcd_start(core_if); ++ core_if->op_state = A_HOST; ++ } ++ } ++ if (gotgint.b.adevtoutchng) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "A-Device Timeout Change++\n"); ++ } ++ if (gotgint.b.debdone) { ++ DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " ++ "Debounce Done++\n"); ++ } ++ ++ /* Clear GOTGINT */ ++ dwc_write_reg32 (&core_if->core_global_regs->gotgint, gotgint.d32); ++ ++ return 1; ++} ++ ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ ++void w_conn_id_status_change(void *p) ++{ ++ dwc_otg_core_if_t *core_if = p; ++ ++#else ++ ++void w_conn_id_status_change(struct work_struct *p) ++{ ++ dwc_otg_core_if_t *core_if = container_of(p, dwc_otg_core_if_t, w_conn_id); ++ ++#endif ++ ++ ++ uint32_t count = 0; ++ gotgctl_data_t gotgctl = { .d32 = 0 }; ++ ++ gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl); ++ DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32); ++ DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts); ++ ++ /* B-Device connector (Device Mode) */ ++ if (gotgctl.b.conidsts) { ++ /* Wait for switch to device mode. */ ++ while (!dwc_otg_is_device_mode(core_if)){ ++ DWC_PRINT("Waiting for Peripheral Mode, Mode=%s\n", ++ (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral")); ++ MDELAY(100); ++ if (++count > 10000) *(uint32_t*)NULL=0; ++ } ++ core_if->op_state = B_PERIPHERAL; ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ pcd_start(core_if); ++ } else { ++ /* A-Device connector (Host Mode) */ ++ while (!dwc_otg_is_host_mode(core_if)) { ++ DWC_PRINT("Waiting for Host Mode, Mode=%s\n", ++ (dwc_otg_is_host_mode(core_if)?"Host":"Peripheral")); ++ MDELAY(100); ++ if (++count > 10000) *(uint32_t*)NULL=0; ++ } ++ core_if->op_state = A_HOST; ++ /* ++ * Initialize the Core for Host mode. ++ */ ++ dwc_otg_core_init(core_if); ++ dwc_otg_enable_global_interrupts(core_if); ++ hcd_start(core_if); ++ } ++} ++ ++ ++/** ++ * This function handles the Connector ID Status Change Interrupt. It ++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this ++ * is a Device to Host Mode transition or a Host Mode to Device ++ * Transition. ++ * ++ * This only occurs when the cable is connected/removed from the PHY ++ * connector. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t *core_if) ++{ ++ ++ /* ++ * Need to disable SOF interrupt immediately. If switching from device ++ * to host, the PCD interrupt handler won't handle the interrupt if ++ * host mode is already set. The HCD interrupt handler won't get ++ * called if the HCD state is HALT. This means that the interrupt does ++ * not get handled and Linux complains loudly. ++ */ ++ gintmsk_data_t gintmsk = { .d32 = 0 }; ++ gintsts_data_t gintsts = { .d32 = 0 }; ++ ++ gintmsk.b.sofintr = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0); ++ ++ DWC_DEBUGPL(DBG_CIL, " ++Connector ID Status Change Interrupt++ (%s)\n", ++ (dwc_otg_is_host_mode(core_if)?"Host":"Device")); ++ ++ /* ++ * Need to schedule a work, as there are possible DELAY function calls ++ */ ++ queue_work(core_if->wq_otg, &core_if->w_conn_id); ++ ++ /* Set flag and clear interrupt */ ++ gintsts.b.conidstschng = 1; ++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that a device is initiating the Session ++ * Request Protocol to request the host to turn on bus power so a new ++ * session can begin. The handler responds by turning on bus power. If ++ * the DWC_otg controller is in low power mode, the handler brings the ++ * controller out of low power mode before turning on bus power. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t *core_if) ++{ ++ gintsts_data_t gintsts; ++ ++#ifndef DWC_HOST_ONLY ++ hprt0_data_t hprt0; ++ DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n"); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ DWC_PRINT("SRP: Device mode\n"); ++ } else { ++ DWC_PRINT("SRP: Host mode\n"); ++ ++ /* Turn on the port power bit. */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Start the Connection timer. So a message can be displayed ++ * if connect does not occur within 10 seconds. */ ++ hcd_session_start(core_if); ++ } ++#endif ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.sessreqintr = 1; ++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++void w_wakeup_detected(void *p) ++{ ++ dwc_otg_core_if_t* core_if = p; ++ ++#else ++ ++void w_wakeup_detected(struct work_struct *p) ++{ ++ struct delayed_work *dw = container_of(p, struct delayed_work, work); ++ dwc_otg_core_if_t *core_if = container_of(dw, dwc_otg_core_if_t, w_wkp); ++ ++#endif ++ /* ++ * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms ++ * so that OPT tests pass with all PHYs). ++ */ ++ hprt0_data_t hprt0 = {.d32=0}; ++#if 0 ++ pcgcctl_data_t pcgcctl = {.d32=0}; ++ /* Restart the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0); ++ UDELAY(10); ++#endif //0 ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ DWC_DEBUGPL(DBG_ANY,"Resume: HPRT0=%0x\n", hprt0.d32); ++// MDELAY(70); ++ hprt0.b.prtres = 0; /* Resume */ ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ DWC_DEBUGPL(DBG_ANY,"Clear Resume: HPRT0=%0x\n", dwc_read_reg32(core_if->host_if->hprt0)); ++} ++/** ++ * This interrupt indicates that the DWC_otg controller has detected a ++ * resume or remote wakeup sequence. If the DWC_otg controller is in ++ * low power mode, the handler must brings the controller out of low ++ * power mode. The controller automatically begins resume ++ * signaling. The handler schedules a time to stop resume signaling. ++ */ ++int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t *core_if) ++{ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_ANY, "++Resume and Remote Wakeup Detected Interrupt++\n"); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dctl_data_t dctl = {.d32=0}; ++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", ++ dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts)); ++#ifdef PARTIAL_POWER_DOWN ++ if (core_if->hwcfg4.b.power_optimiz) { ++ pcgcctl_data_t power = {.d32=0}; ++ ++ power.d32 = dwc_read_reg32(core_if->pcgcctl); ++ DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n", power.d32); ++ ++ power.b.stoppclk = 0; ++ dwc_write_reg32(core_if->pcgcctl, power.d32); ++ ++ power.b.pwrclmp = 0; ++ dwc_write_reg32(core_if->pcgcctl, power.d32); ++ ++ power.b.rstpdwnmodule = 0; ++ dwc_write_reg32(core_if->pcgcctl, power.d32); ++ } ++#endif ++ /* Clear the Remote Wakeup Signalling */ ++ dctl.b.rmtwkupsig = 1; ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, ++ dctl.d32, 0); ++ ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++ ++ } else { ++ pcgcctl_data_t pcgcctl = {.d32=0}; ++ ++ /* Restart the Phy Clock */ ++ pcgcctl.b.stoppclk = 1; ++ dwc_modify_reg32(core_if->pcgcctl, pcgcctl.d32, 0); ++ ++ queue_delayed_work(core_if->wq_otg, &core_if->w_wkp, ((70 * HZ / 1000) + 1)); ++ } ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.wkupintr = 1; ++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that a device has been disconnected from ++ * the root port. ++ */ ++int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t *core_if) ++{ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n", ++ (dwc_otg_is_host_mode(core_if)?"Host":"Device"), ++ op_state_str(core_if)); ++ ++/** @todo Consolidate this if statement. */ ++#ifndef DWC_HOST_ONLY ++ if (core_if->op_state == B_HOST) { ++ /* If in device mode Disconnect and stop the HCD, then ++ * start the PCD. */ ++ hcd_disconnect(core_if); ++ pcd_start(core_if); ++ core_if->op_state = B_PERIPHERAL; ++ } else if (dwc_otg_is_device_mode(core_if)) { ++ gotgctl_data_t gotgctl = { .d32 = 0 }; ++ gotgctl.d32 = dwc_read_reg32(&core_if->core_global_regs->gotgctl); ++ if (gotgctl.b.hstsethnpen==1) { ++ /* Do nothing, if HNP in process the OTG ++ * interrupt "Host Negotiation Detected" ++ * interrupt will do the mode switch. ++ */ ++ } else if (gotgctl.b.devhnpen == 0) { ++ /* If in device mode Disconnect and stop the HCD, then ++ * start the PCD. */ ++ hcd_disconnect(core_if); ++ pcd_start(core_if); ++ core_if->op_state = B_PERIPHERAL; ++ } else { ++ DWC_DEBUGPL(DBG_ANY,"!a_peripheral && !devhnpen\n"); ++ } ++ } else { ++ if (core_if->op_state == A_HOST) { ++ /* A-Cable still connected but device disconnected. */ ++ hcd_disconnect(core_if); ++ } ++ } ++#endif ++ ++ gintsts.d32 = 0; ++ gintsts.b.disconnect = 1; ++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); ++ return 1; ++} ++/** ++ * This interrupt indicates that SUSPEND state has been detected on ++ * the USB. ++ * ++ * For HNP the USB Suspend interrupt signals the change from ++ * "a_peripheral" to "a_host". ++ * ++ * When power management is enabled the core will be put in low power ++ * mode. ++ */ ++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t *core_if) ++{ ++ dsts_data_t dsts; ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_ANY,"USB SUSPEND\n"); ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ /* Check the Device status register to determine if the Suspend ++ * state is active. */ ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32); ++ DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d " ++ "HWCFG4.power Optimize=%d\n", ++ dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz); ++ ++ ++#ifdef PARTIAL_POWER_DOWN ++/** @todo Add a module parameter for power management. */ ++ ++ if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) { ++ pcgcctl_data_t power = {.d32=0}; ++ DWC_DEBUGPL(DBG_CIL, "suspend\n"); ++ ++ power.b.pwrclmp = 1; ++ dwc_write_reg32(core_if->pcgcctl, power.d32); ++ ++ power.b.rstpdwnmodule = 1; ++ dwc_modify_reg32(core_if->pcgcctl, 0, power.d32); ++ ++ power.b.stoppclk = 1; ++ dwc_modify_reg32(core_if->pcgcctl, 0, power.d32); ++ ++ } else { ++ DWC_DEBUGPL(DBG_ANY,"disconnect?\n"); ++ } ++#endif ++ /* PCD callback for suspend. */ ++ pcd_suspend(core_if); ++ } else { ++ if (core_if->op_state == A_PERIPHERAL) { ++ DWC_DEBUGPL(DBG_ANY,"a_peripheral->a_host\n"); ++ /* Clear the a_peripheral flag, back to a_host. */ ++ pcd_stop(core_if); ++ hcd_start(core_if); ++ core_if->op_state = A_HOST; ++ } ++ } ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.usbsuspend = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++ ++/** ++ * This function returns the Core Interrupt register. ++ */ ++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t *core_if) ++{ ++ gintsts_data_t gintsts; ++ gintmsk_data_t gintmsk; ++ gintmsk_data_t gintmsk_common = {.d32=0}; ++ gintmsk_common.b.wkupintr = 1; ++ gintmsk_common.b.sessreqintr = 1; ++ gintmsk_common.b.conidstschng = 1; ++ gintmsk_common.b.otgintr = 1; ++ gintmsk_common.b.modemismatch = 1; ++ gintmsk_common.b.disconnect = 1; ++ gintmsk_common.b.usbsuspend = 1; ++ /** @todo: The port interrupt occurs while in device ++ * mode. Added code to CIL to clear the interrupt for now! ++ */ ++ gintmsk_common.b.portintr = 1; ++ ++ gintsts.d32 = dwc_read_reg32(&core_if->core_global_regs->gintsts); ++ gintmsk.d32 = dwc_read_reg32(&core_if->core_global_regs->gintmsk); ++#ifdef DEBUG ++ /* if any common interrupts set */ ++ if (gintsts.d32 & gintmsk_common.d32) { ++ DWC_DEBUGPL(DBG_ANY, "gintsts=%08x gintmsk=%08x\n", ++ gintsts.d32, gintmsk.d32); ++ } ++#endif ++ ++ return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32); ++ ++} ++ ++/** ++ * Common interrupt handler. ++ * ++ * The common interrupts are those that occur in both Host and Device mode. ++ * This handler handles the following interrupts: ++ * - Mode Mismatch Interrupt ++ * - Disconnect Interrupt ++ * - OTG Interrupt ++ * - Connector ID Status Change Interrupt ++ * - Session Request Interrupt. ++ * - Resume / Remote Wakeup Detected Interrupt. ++ * ++ */ ++int32_t dwc_otg_handle_common_intr(dwc_otg_core_if_t *core_if) ++{ ++ int retval = 0; ++ gintsts_data_t gintsts; ++ ++ gintsts.d32 = dwc_otg_read_common_intr(core_if); ++ ++ if (gintsts.b.modemismatch) { ++ retval |= dwc_otg_handle_mode_mismatch_intr(core_if); ++ } ++ if (gintsts.b.otgintr) { ++ retval |= dwc_otg_handle_otg_intr(core_if); ++ } ++ if (gintsts.b.conidstschng) { ++ retval |= dwc_otg_handle_conn_id_status_change_intr(core_if); ++ } ++ if (gintsts.b.disconnect) { ++ retval |= dwc_otg_handle_disconnect_intr(core_if); ++ } ++ if (gintsts.b.sessreqintr) { ++ retval |= dwc_otg_handle_session_req_intr(core_if); ++ } ++ if (gintsts.b.wkupintr) { ++ retval |= dwc_otg_handle_wakeup_detected_intr(core_if); ++ } ++ if (gintsts.b.usbsuspend) { ++ retval |= dwc_otg_handle_usb_suspend_intr(core_if); ++ } ++ if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) { ++ /* The port interrupt occurs while in device mode with HPRT0 ++ * Port Enable/Disable. ++ */ ++ gintsts.d32 = 0; ++ gintsts.b.portintr = 1; ++ dwc_write_reg32(&core_if->core_global_regs->gintsts, ++ gintsts.d32); ++ retval |= 1; ++ ++ } ++ ++ S3C2410X_CLEAR_EINTPEND(); ++ ++ return retval; ++} +diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.c b/drivers/usb/dwc_otg/dwc_otg_driver.c +new file mode 100644 +index 0000000..263494c +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_driver.c +@@ -0,0 +1,1273 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_driver.c $ ++ * $Revision: 1.7 $ ++ * $Date: 2008-11-21 05:39:15 $ ++ * $Change: 791271 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++/** @file ++ * The dwc_otg_driver module provides the initialization and cleanup entry ++ * points for the DWC_otg driver. This module will be dynamically installed ++ * after Linux is booted using the insmod command. When the module is ++ * installed, the dwc_otg_driver_init function is called. When the module is ++ * removed (using rmmod), the dwc_otg_driver_cleanup function is called. ++ * ++ * This module also defines a data structure for the dwc_otg_driver, which is ++ * used in conjunction with the standard ARM platform_device structure. These ++ * structures allow the OTG driver to comply with the standard Linux driver ++ * model in which devices and drivers are registered with a bus driver. This ++ * has the benefit that Linux can expose attributes of the driver and device ++ * in its special sysfs file system. Users can then read or write files in ++ * this file system to perform diagnostics on the driver components or the ++ * device. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/errno.h> ++#include <linux/types.h> ++#include <linux/stat.h> /* permission constants */ ++#include <linux/version.h> ++#include <linux/platform_device.h> ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++# include <linux/irq.h> ++#endif ++ ++#include <asm/io.h> ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++# include <asm/irq.h> ++#endif ++ ++#include "linux/dwc_otg_plat.h" ++#include "dwc_otg_attr.h" ++#include "dwc_otg_driver.h" ++#include "dwc_otg_cil.h" ++#include "dwc_otg_pcd.h" ++#include "dwc_otg_hcd.h" ++ ++#define DWC_DRIVER_VERSION "2.72a 24-JUN-2008" ++#define DWC_DRIVER_DESC "HS OTG USB Controller driver" ++ ++static const char dwc_driver_name[] = "dwc_otg"; ++ ++/*-------------------------------------------------------------------------*/ ++/* Encapsulate the module parameter settings */ ++ ++static dwc_otg_core_params_t dwc_otg_module_params = { ++ .opt = -1, ++ .otg_cap = -1, ++ .dma_enable = -1, ++ .dma_desc_enable = -1, ++ .dma_burst_size = -1, ++ .speed = -1, ++ .host_support_fs_ls_low_power = -1, ++ .host_ls_low_power_phy_clk = -1, ++ .enable_dynamic_fifo = -1, ++ .data_fifo_size = -1, ++ .dev_rx_fifo_size = -1, ++ .dev_nperio_tx_fifo_size = -1, ++ .dev_perio_tx_fifo_size = { ++ /* dev_perio_tx_fifo_size_1 */ ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1 ++ /* 15 */ ++ }, ++ .host_rx_fifo_size = -1, ++ .host_nperio_tx_fifo_size = -1, ++ .host_perio_tx_fifo_size = -1, ++ .max_transfer_size = -1, ++ .max_packet_count = -1, ++ .host_channels = -1, ++ .dev_endpoints = -1, ++ .phy_type = -1, ++ .phy_utmi_width = -1, ++ .phy_ulpi_ddr = -1, ++ .phy_ulpi_ext_vbus = -1, ++ .i2c_enable = -1, ++ .ulpi_fs_ls = -1, ++ .ts_dline = -1, ++ .en_multiple_tx_fifo = -1, ++ .dev_tx_fifo_size = { ++ /* dev_tx_fifo_size */ ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1, ++ -1 ++ /* 15 */ ++ }, ++ .thr_ctl = -1, ++ .tx_thr_length = -1, ++ .rx_thr_length = -1, ++ .pti_enable = -1, ++ .mpi_enable = -1, ++}; ++ ++/** ++ * This function shows the Driver Version. ++ */ ++static ssize_t version_show(struct device_driver *dev, char *buf) ++{ ++ return snprintf(buf, sizeof(DWC_DRIVER_VERSION)+2, "%s\n", ++ DWC_DRIVER_VERSION); ++} ++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL); ++ ++/** ++ * Global Debug Level Mask. ++ */ ++uint32_t g_dbg_lvl = 0; /* OFF */ ++ ++/** ++ * This function shows the driver Debug Level. ++ */ ++static ssize_t dbg_level_show(struct device_driver *drv, char *buf) ++{ ++ return sprintf(buf, "0x%0x\n", g_dbg_lvl); ++} ++ ++/** ++ * This function stores the driver Debug Level. ++ */ ++static ssize_t dbg_level_store(struct device_driver *drv, const char *buf, ++ size_t count) ++{ ++ g_dbg_lvl = simple_strtoul(buf, NULL, 16); ++ return count; ++} ++static DRIVER_ATTR(debuglevel, S_IRUGO|S_IWUSR, dbg_level_show, dbg_level_store); ++ ++/** ++ * This function is called during module intialization to verify that ++ * the module parameters are in a valid state. ++ */ ++static int check_parameters(dwc_otg_core_if_t *core_if) ++{ ++ int i; ++ int retval = 0; ++ ++/* Checks if the parameter is outside of its valid range of values */ ++#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \ ++ ((dwc_otg_module_params._param_ < (_low_)) || \ ++ (dwc_otg_module_params._param_ > (_high_))) ++ ++/* If the parameter has been set by the user, check that the parameter value is ++ * within the value range of values. If not, report a module error. */ ++#define DWC_OTG_PARAM_ERR(_param_, _low_, _high_, _string_) \ ++ do { \ ++ if (dwc_otg_module_params._param_ != -1) { \ ++ if (DWC_OTG_PARAM_TEST(_param_, (_low_), (_high_))) { \ ++ DWC_ERROR("`%d' invalid for parameter `%s'\n", \ ++ dwc_otg_module_params._param_, _string_); \ ++ dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \ ++ retval++; \ ++ } \ ++ } \ ++ } while (0) ++ ++ DWC_OTG_PARAM_ERR(opt,0,1,"opt"); ++ DWC_OTG_PARAM_ERR(otg_cap,0,2,"otg_cap"); ++ DWC_OTG_PARAM_ERR(dma_enable,0,1,"dma_enable"); ++ DWC_OTG_PARAM_ERR(dma_desc_enable,0,1,"dma_desc_enable"); ++ DWC_OTG_PARAM_ERR(speed,0,1,"speed"); ++ DWC_OTG_PARAM_ERR(host_support_fs_ls_low_power,0,1,"host_support_fs_ls_low_power"); ++ DWC_OTG_PARAM_ERR(host_ls_low_power_phy_clk,0,1,"host_ls_low_power_phy_clk"); ++ DWC_OTG_PARAM_ERR(enable_dynamic_fifo,0,1,"enable_dynamic_fifo"); ++ DWC_OTG_PARAM_ERR(data_fifo_size,32,32768,"data_fifo_size"); ++ DWC_OTG_PARAM_ERR(dev_rx_fifo_size,16,32768,"dev_rx_fifo_size"); ++ DWC_OTG_PARAM_ERR(dev_nperio_tx_fifo_size,16,32768,"dev_nperio_tx_fifo_size"); ++ DWC_OTG_PARAM_ERR(host_rx_fifo_size,16,32768,"host_rx_fifo_size"); ++ DWC_OTG_PARAM_ERR(host_nperio_tx_fifo_size,16,32768,"host_nperio_tx_fifo_size"); ++ DWC_OTG_PARAM_ERR(host_perio_tx_fifo_size,16,32768,"host_perio_tx_fifo_size"); ++ DWC_OTG_PARAM_ERR(max_transfer_size,2047,524288,"max_transfer_size"); ++ DWC_OTG_PARAM_ERR(max_packet_count,15,511,"max_packet_count"); ++ DWC_OTG_PARAM_ERR(host_channels,1,16,"host_channels"); ++ DWC_OTG_PARAM_ERR(dev_endpoints,1,15,"dev_endpoints"); ++ DWC_OTG_PARAM_ERR(phy_type,0,2,"phy_type"); ++ DWC_OTG_PARAM_ERR(phy_ulpi_ddr,0,1,"phy_ulpi_ddr"); ++ DWC_OTG_PARAM_ERR(phy_ulpi_ext_vbus,0,1,"phy_ulpi_ext_vbus"); ++ DWC_OTG_PARAM_ERR(i2c_enable,0,1,"i2c_enable"); ++ DWC_OTG_PARAM_ERR(ulpi_fs_ls,0,1,"ulpi_fs_ls"); ++ DWC_OTG_PARAM_ERR(ts_dline,0,1,"ts_dline"); ++ ++ if (dwc_otg_module_params.dma_burst_size != -1) { ++ if (DWC_OTG_PARAM_TEST(dma_burst_size,1,1) && ++ DWC_OTG_PARAM_TEST(dma_burst_size,4,4) && ++ DWC_OTG_PARAM_TEST(dma_burst_size,8,8) && ++ DWC_OTG_PARAM_TEST(dma_burst_size,16,16) && ++ DWC_OTG_PARAM_TEST(dma_burst_size,32,32) && ++ DWC_OTG_PARAM_TEST(dma_burst_size,64,64) && ++ DWC_OTG_PARAM_TEST(dma_burst_size,128,128) && ++ DWC_OTG_PARAM_TEST(dma_burst_size,256,256)) { ++ DWC_ERROR("`%d' invalid for parameter `dma_burst_size'\n", ++ dwc_otg_module_params.dma_burst_size); ++ dwc_otg_module_params.dma_burst_size = 32; ++ retval++; ++ } ++ ++ { ++ uint8_t brst_sz = 0; ++ while(dwc_otg_module_params.dma_burst_size > 1) { ++ brst_sz ++; ++ dwc_otg_module_params.dma_burst_size >>= 1; ++ } ++ dwc_otg_module_params.dma_burst_size = brst_sz; ++ } ++ } ++ ++ if (dwc_otg_module_params.phy_utmi_width != -1) { ++ if (DWC_OTG_PARAM_TEST(phy_utmi_width, 8, 8) && ++ DWC_OTG_PARAM_TEST(phy_utmi_width, 16, 16)) { ++ DWC_ERROR("`%d' invalid for parameter `phy_utmi_width'\n", ++ dwc_otg_module_params.phy_utmi_width); ++ dwc_otg_module_params.phy_utmi_width = 16; ++ retval++; ++ } ++ } ++ ++ for (i = 0; i < 15; i++) { ++ /** @todo should be like above */ ++ //DWC_OTG_PARAM_ERR(dev_perio_tx_fifo_size[i], 4, 768, "dev_perio_tx_fifo_size"); ++ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) { ++ if (DWC_OTG_PARAM_TEST(dev_perio_tx_fifo_size[i], 4, 768)) { ++ DWC_ERROR("`%d' invalid for parameter `%s_%d'\n", ++ dwc_otg_module_params.dev_perio_tx_fifo_size[i], "dev_perio_tx_fifo_size", i); ++ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default; ++ retval++; ++ } ++ } ++ } ++ ++ DWC_OTG_PARAM_ERR(en_multiple_tx_fifo, 0, 1, "en_multiple_tx_fifo"); ++ ++ for (i = 0; i < 15; i++) { ++ /** @todo should be like above */ ++ //DWC_OTG_PARAM_ERR(dev_tx_fifo_size[i], 4, 768, "dev_tx_fifo_size"); ++ if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) { ++ if (DWC_OTG_PARAM_TEST(dev_tx_fifo_size[i], 4, 768)) { ++ DWC_ERROR("`%d' invalid for parameter `%s_%d'\n", ++ dwc_otg_module_params.dev_tx_fifo_size[i], "dev_tx_fifo_size", i); ++ dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default; ++ retval++; ++ } ++ } ++ } ++ ++ DWC_OTG_PARAM_ERR(thr_ctl, 0, 7, "thr_ctl"); ++ DWC_OTG_PARAM_ERR(tx_thr_length, 8, 128, "tx_thr_length"); ++ DWC_OTG_PARAM_ERR(rx_thr_length, 8, 128, "rx_thr_length"); ++ ++ DWC_OTG_PARAM_ERR(pti_enable,0,1,"pti_enable"); ++ DWC_OTG_PARAM_ERR(mpi_enable,0,1,"mpi_enable"); ++ ++ /* At this point, all module parameters that have been set by the user ++ * are valid, and those that have not are left unset. Now set their ++ * default values and/or check the parameters against the hardware ++ * configurations of the OTG core. */ ++ ++/* This sets the parameter to the default value if it has not been set by the ++ * user */ ++#define DWC_OTG_PARAM_SET_DEFAULT(_param_) \ ++ ({ \ ++ int changed = 1; \ ++ if (dwc_otg_module_params._param_ == -1) { \ ++ changed = 0; \ ++ dwc_otg_module_params._param_ = dwc_param_##_param_##_default; \ ++ } \ ++ changed; \ ++ }) ++ ++/* This checks the macro agains the hardware configuration to see if it is ++ * valid. It is possible that the default value could be invalid. In this ++ * case, it will report a module error if the user touched the parameter. ++ * Otherwise it will adjust the value without any error. */ ++#define DWC_OTG_PARAM_CHECK_VALID(_param_, _str_, _is_valid_, _set_valid_) \ ++ ({ \ ++ int changed = DWC_OTG_PARAM_SET_DEFAULT(_param_); \ ++ int error = 0; \ ++ if (!(_is_valid_)) { \ ++ if (changed) { \ ++ DWC_ERROR("`%d' invalid for parameter `%s'. Check HW configuration.\n", dwc_otg_module_params._param_, _str_); \ ++ error = 1; \ ++ } \ ++ dwc_otg_module_params._param_ = (_set_valid_); \ ++ } \ ++ error; \ ++ }) ++ ++ /* OTG Cap */ ++ retval += DWC_OTG_PARAM_CHECK_VALID(otg_cap, "otg_cap", ++ ({ ++ int valid; ++ valid = 1; ++ switch (dwc_otg_module_params.otg_cap) { ++ case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE: ++ if (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) ++ valid = 0; ++ break; ++ case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE: ++ if ((core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) && ++ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) && ++ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) && ++ (core_if->hwcfg2.b.op_mode != DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { ++ valid = 0; ++ } ++ break; ++ case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE: ++ /* always valid */ ++ break; ++ } ++ valid; ++ }), ++ (((core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG) || ++ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG) || ++ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) || ++ (core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ? ++ DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE : ++ DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE)); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(dma_enable, "dma_enable", ++ ((dwc_otg_module_params.dma_enable == 1) && (core_if->hwcfg2.b.architecture == 0)) ? 0 : 1, ++ 0); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(dma_desc_enable, "dma_desc_enable", ++ ((dwc_otg_module_params.dma_desc_enable == 1) && ++ ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.desc_dma == 0))) ? 0 : 1, ++ 0); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(opt, "opt", 1, 0); ++ ++ DWC_OTG_PARAM_SET_DEFAULT(dma_burst_size); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(host_support_fs_ls_low_power, ++ "host_support_fs_ls_low_power", ++ 1, 0); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(enable_dynamic_fifo, ++ "enable_dynamic_fifo", ++ ((dwc_otg_module_params.enable_dynamic_fifo == 0) || ++ (core_if->hwcfg2.b.dynamic_fifo == 1)), 0); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(data_fifo_size, ++ "data_fifo_size", ++ (dwc_otg_module_params.data_fifo_size <= core_if->hwcfg3.b.dfifo_depth), ++ core_if->hwcfg3.b.dfifo_depth); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(dev_rx_fifo_size, ++ "dev_rx_fifo_size", ++ (dwc_otg_module_params.dev_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)), ++ dwc_read_reg32(&core_if->core_global_regs->grxfsiz)); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(dev_nperio_tx_fifo_size, ++ "dev_nperio_tx_fifo_size", ++ (dwc_otg_module_params.dev_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)), ++ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(host_rx_fifo_size, ++ "host_rx_fifo_size", ++ (dwc_otg_module_params.host_rx_fifo_size <= dwc_read_reg32(&core_if->core_global_regs->grxfsiz)), ++ dwc_read_reg32(&core_if->core_global_regs->grxfsiz)); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(host_nperio_tx_fifo_size, ++ "host_nperio_tx_fifo_size", ++ (dwc_otg_module_params.host_nperio_tx_fifo_size <= (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)), ++ (dwc_read_reg32(&core_if->core_global_regs->gnptxfsiz) >> 16)); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(host_perio_tx_fifo_size, ++ "host_perio_tx_fifo_size", ++ (dwc_otg_module_params.host_perio_tx_fifo_size <= ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))), ++ ((dwc_read_reg32(&core_if->core_global_regs->hptxfsiz) >> 16))); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(max_transfer_size, ++ "max_transfer_size", ++ (dwc_otg_module_params.max_transfer_size < (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))), ++ ((1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11)) - 1)); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(max_packet_count, ++ "max_packet_count", ++ (dwc_otg_module_params.max_packet_count < (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))), ++ ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1)); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(host_channels, ++ "host_channels", ++ (dwc_otg_module_params.host_channels <= (core_if->hwcfg2.b.num_host_chan + 1)), ++ (core_if->hwcfg2.b.num_host_chan + 1)); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(dev_endpoints, ++ "dev_endpoints", ++ (dwc_otg_module_params.dev_endpoints <= (core_if->hwcfg2.b.num_dev_ep)), ++ core_if->hwcfg2.b.num_dev_ep); ++ ++/* ++ * Define the following to disable the FS PHY Hardware checking. This is for ++ * internal testing only. ++ * ++ * #define NO_FS_PHY_HW_CHECKS ++ */ ++ ++#ifdef NO_FS_PHY_HW_CHECKS ++ retval += DWC_OTG_PARAM_CHECK_VALID(phy_type, ++ "phy_type", 1, 0); ++#else ++ retval += DWC_OTG_PARAM_CHECK_VALID(phy_type, ++ "phy_type", ++ ({ ++ int valid = 0; ++ if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_UTMI) && ++ ((core_if->hwcfg2.b.hs_phy_type == 1) || ++ (core_if->hwcfg2.b.hs_phy_type == 3))) { ++ valid = 1; ++ } ++ else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_ULPI) && ++ ((core_if->hwcfg2.b.hs_phy_type == 2) || ++ (core_if->hwcfg2.b.hs_phy_type == 3))) { ++ valid = 1; ++ } ++ else if ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) && ++ (core_if->hwcfg2.b.fs_phy_type == 1)) { ++ valid = 1; ++ } ++ valid; ++ }), ++ ({ ++ int set = DWC_PHY_TYPE_PARAM_FS; ++ if (core_if->hwcfg2.b.hs_phy_type) { ++ if ((core_if->hwcfg2.b.hs_phy_type == 3) || ++ (core_if->hwcfg2.b.hs_phy_type == 1)) { ++ set = DWC_PHY_TYPE_PARAM_UTMI; ++ } ++ else { ++ set = DWC_PHY_TYPE_PARAM_ULPI; ++ } ++ } ++ set; ++ })); ++#endif ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(speed, "speed", ++ (dwc_otg_module_params.speed == 0) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1, ++ dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS ? 1 : 0); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(host_ls_low_power_phy_clk, ++ "host_ls_low_power_phy_clk", ++ ((dwc_otg_module_params.host_ls_low_power_phy_clk == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ) && (dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? 0 : 1), ++ ((dwc_otg_module_params.phy_type == DWC_PHY_TYPE_PARAM_FS) ? DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ : DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ)); ++ ++ DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ddr); ++ DWC_OTG_PARAM_SET_DEFAULT(phy_ulpi_ext_vbus); ++ DWC_OTG_PARAM_SET_DEFAULT(phy_utmi_width); ++ DWC_OTG_PARAM_SET_DEFAULT(ulpi_fs_ls); ++ DWC_OTG_PARAM_SET_DEFAULT(ts_dline); ++ ++#ifdef NO_FS_PHY_HW_CHECKS ++ retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, "i2c_enable", 1, 0); ++#else ++ retval += DWC_OTG_PARAM_CHECK_VALID(i2c_enable, ++ "i2c_enable", ++ (dwc_otg_module_params.i2c_enable == 1) && (core_if->hwcfg3.b.i2c == 0) ? 0 : 1, ++ 0); ++#endif ++ ++ for (i = 0; i < 15; i++) { ++ int changed = 1; ++ int error = 0; ++ ++ if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] == -1) { ++ changed = 0; ++ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_param_dev_perio_tx_fifo_size_default; ++ } ++ if (!(dwc_otg_module_params.dev_perio_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) { ++ if (changed) { ++ DWC_ERROR("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_perio_tx_fifo_size[i], i); ++ error = 1; ++ } ++ dwc_otg_module_params.dev_perio_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]); ++ } ++ retval += error; ++ } ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(en_multiple_tx_fifo, "en_multiple_tx_fifo", ++ ((dwc_otg_module_params.en_multiple_tx_fifo == 1) && (core_if->hwcfg4.b.ded_fifo_en == 0)) ? 0 : 1, ++ 0); ++ ++ for (i = 0; i < 15; i++) { ++ int changed = 1; ++ int error = 0; ++ ++ if (dwc_otg_module_params.dev_tx_fifo_size[i] == -1) { ++ changed = 0; ++ dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_param_dev_tx_fifo_size_default; ++ } ++ if (!(dwc_otg_module_params.dev_tx_fifo_size[i] <= (dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i])))) { ++ if (changed) { ++ DWC_ERROR("%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n", dwc_otg_module_params.dev_tx_fifo_size[i], i); ++ error = 1; ++ } ++ dwc_otg_module_params.dev_tx_fifo_size[i] = dwc_read_reg32(&core_if->core_global_regs->dptxfsiz_dieptxf[i]); ++ } ++ retval += error; ++ } ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(thr_ctl, "thr_ctl", ++ ((dwc_otg_module_params.thr_ctl != 0) && ((dwc_otg_module_params.dma_enable == 0) || (core_if->hwcfg4.b.ded_fifo_en == 0))) ? 0 : 1, ++ 0); ++ ++ DWC_OTG_PARAM_SET_DEFAULT(tx_thr_length); ++ DWC_OTG_PARAM_SET_DEFAULT(rx_thr_length); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(pti_enable, "pti_enable", ++ ((dwc_otg_module_params.pti_enable == 0) || ((dwc_otg_module_params.pti_enable == 1) && (core_if->snpsid >= 0x4F54272A))) ? 1 : 0, ++ 0); ++ ++ retval += DWC_OTG_PARAM_CHECK_VALID(mpi_enable, "mpi_enable", ++ ((dwc_otg_module_params.mpi_enable == 0) || ((dwc_otg_module_params.mpi_enable == 1) && (core_if->hwcfg2.b.multi_proc_int == 1))) ? 1 : 0, ++ 0); ++ return retval; ++} ++ ++/** ++ * This function is the top level interrupt handler for the Common ++ * (Device and host modes) interrupts. ++ */ ++static irqreturn_t dwc_otg_common_irq(int irq, void *dev ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) ++ , struct pt_regs *r ++#endif ++ ) ++{ ++ dwc_otg_device_t *otg_dev = dev; ++ int32_t retval = IRQ_NONE; ++ ++ retval = dwc_otg_handle_common_intr(otg_dev->core_if); ++ return IRQ_RETVAL(retval); ++} ++ ++/** ++ * This function is called when a platform_device is unregistered with the ++ * dwc_otg_driver. This happens, for example, when the rmmod command is ++ * executed. The device may or may not be electrically present. If it is ++ * present, the driver stops device processing. Any resources used on behalf ++ * of this device are freed. ++ * ++ * @param[in] pdev ++ */ ++static int dwc_otg_driver_remove(struct platform_device *pdev) ++{ ++ dwc_otg_device_t *otg_dev = platform_get_drvdata(pdev); ++ DWC_DEBUGPL(DBG_ANY, "%s(%p)\n", __func__, pdev); ++ ++ if (!otg_dev) { ++ /* Memory allocation for the dwc_otg_device failed. */ ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); ++ return 0; ++ } ++ ++ /* ++ * Free the IRQ ++ */ ++ if (otg_dev->common_irq_installed) { ++ free_irq(otg_dev->irq, otg_dev); ++ } ++ ++#ifndef DWC_DEVICE_ONLY ++ if (otg_dev->hcd) { ++ dwc_otg_hcd_remove(&pdev->dev); ++ } else { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); ++ return 0; ++ } ++#endif ++ ++#ifndef DWC_HOST_ONLY ++ if (otg_dev->pcd) { ++ dwc_otg_pcd_remove(&pdev->dev); ++ } ++#endif ++ if (otg_dev->core_if) { ++ dwc_otg_cil_remove(otg_dev->core_if); ++ } ++ ++ /* ++ * Remove the device attributes ++ */ ++ dwc_otg_attr_remove(otg_dev->parent); ++ ++ /* Disable USB port */ ++ dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0xf); ++ ++ /* ++ * Return the memory. ++ */ ++ if (otg_dev->base) { ++ iounmap(otg_dev->base); ++ } ++ ++ if (otg_dev->phys_addr != 0) { ++ release_mem_region(otg_dev->phys_addr, otg_dev->base_len); ++ } ++ ++ kfree(otg_dev); ++ ++ /* ++ * Clear the drvdata pointer. ++ */ ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++/** ++ * This function is called when an platform_device is bound to a ++ * dwc_otg_driver. It creates the driver components required to ++ * control the device (CIL, HCD, and PCD) and it initializes the ++ * device. The driver components are stored in a dwc_otg_device ++ * structure. A reference to the dwc_otg_device is saved in the ++ * platform_device. This allows the driver to access the dwc_otg_device ++ * structure on subsequent calls to driver methods for this device. ++ * ++ * @param[in] pdev platform_device definition ++ */ ++static int dwc_otg_driver_probe(struct platform_device *pdev) ++{ ++ int retval = 0; ++ uint32_t snpsid; ++ dwc_otg_device_t *otg_dev; ++ struct resource *res; ++ ++ dev_dbg(&pdev->dev, "dwc_otg_driver_probe(%p)\n", pdev); ++ ++ otg_dev= kzalloc(sizeof(dwc_otg_device_t), GFP_KERNEL); ++ if (!otg_dev) { ++ dev_err(&pdev->dev, "kmalloc of dwc_otg_device failed\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ ++ otg_dev->reg_offset = 0xFFFFFFFF; ++ ++ /* ++ * Retrieve the memory and IRQ resources. ++ */ ++ otg_dev->irq = platform_get_irq(pdev, 0); ++ if (otg_dev->irq <= 0) { ++ dev_err(&pdev->dev, "no device irq\n"); ++ retval = -EINVAL; ++ goto fail; ++ } ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (res == NULL) { ++ dev_err(&pdev->dev, "no CSR address\n"); ++ retval = -EINVAL; ++ goto fail; ++ } ++ ++ otg_dev->parent = &pdev->dev; ++ otg_dev->phys_addr = res->start; ++ otg_dev->base_len = res->end - res->start + 1; ++ if (request_mem_region(otg_dev->phys_addr, ++ otg_dev->base_len, ++ dwc_driver_name) == NULL) { ++ dev_err(&pdev->dev, "request_mem_region failed\n"); ++ retval = -EBUSY; ++ goto fail; ++ } ++ ++ /* ++ * Map the DWC_otg Core memory into virtual address space. ++ */ ++ otg_dev->base = ioremap(otg_dev->phys_addr, otg_dev->base_len); ++ if (!otg_dev->base) { ++ dev_err(&pdev->dev, "ioremap() failed\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ dev_dbg(&pdev->dev, "mapped base=0x%08x\n", (unsigned) otg_dev->base); ++ ++ /* Enable USB Port */ ++ dwc_write_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0xe00), 0); ++ ++ /* ++ * Attempt to ensure this device is really a DWC_otg Controller. ++ * Read and verify the SNPSID register contents. The value should be ++ * 0x45F42XXX, which corresponds to "OT2", as in "OTG version 2.XX". ++ */ ++ snpsid = dwc_read_reg32((uint32_t *)((uint8_t *)otg_dev->base + 0x40)); ++ ++ if ((snpsid & 0xFFFFF000) != OTG_CORE_REV_2_00) { ++ dev_err(&pdev->dev, "Bad value for SNPSID: 0x%08x\n", snpsid); ++ retval = -EINVAL; ++ goto fail; ++ } ++ ++ DWC_PRINT("Core Release: %x.%x%x%x\n", ++ (snpsid >> 12 & 0xF), ++ (snpsid >> 8 & 0xF), ++ (snpsid >> 4 & 0xF), ++ (snpsid & 0xF)); ++ ++ /* ++ * Initialize driver data to point to the global DWC_otg ++ * Device structure. ++ */ ++ platform_set_drvdata(pdev, otg_dev); ++ dev_dbg(&pdev->dev, "dwc_otg_device=0x%p\n", otg_dev); ++ ++ ++ otg_dev->core_if = dwc_otg_cil_init(otg_dev->base, ++ &dwc_otg_module_params); ++ ++ otg_dev->core_if->snpsid = snpsid; ++ ++ if (!otg_dev->core_if) { ++ dev_err(&pdev->dev, "CIL initialization failed!\n"); ++ retval = -ENOMEM; ++ goto fail; ++ } ++ ++ /* ++ * Validate parameter values. ++ */ ++ if (check_parameters(otg_dev->core_if)) { ++ retval = -EINVAL; ++ goto fail; ++ } ++ ++ /* ++ * Create Device Attributes in sysfs ++ */ ++ //dwc_otg_attr_create(&pdev->dev); ++ ++ /* ++ * Disable the global interrupt until all the interrupt ++ * handlers are installed. ++ */ ++ dwc_otg_disable_global_interrupts(otg_dev->core_if); ++ ++ /* ++ * Install the interrupt handler for the common interrupts before ++ * enabling common interrupts in core_init below. ++ */ ++ DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n", ++ otg_dev->irq); ++ retval = request_irq(otg_dev->irq, dwc_otg_common_irq, ++ IRQF_SHARED, "dwc_otg", otg_dev); ++ if (retval) { ++ DWC_ERROR("request of irq%d failed\n", otg_dev->irq); ++ retval = -EBUSY; ++ goto fail; ++ } else { ++ otg_dev->common_irq_installed = 1; ++ } ++ ++ /* ++ * Initialize the DWC_otg core. ++ */ ++ dwc_otg_core_init(otg_dev->core_if); ++ ++#ifndef DWC_HOST_ONLY ++ /* ++ * Initialize the PCD ++ */ ++ retval = dwc_otg_pcd_init(&pdev->dev); ++ if (retval != 0) { ++ DWC_ERROR("dwc_otg_pcd_init failed\n"); ++ otg_dev->pcd = NULL; ++ goto fail; ++ } ++#endif ++#ifndef DWC_DEVICE_ONLY ++ /* ++ * Initialize the HCD ++ */ ++ retval = dwc_otg_hcd_init(&pdev->dev); ++ if (retval != 0) { ++ DWC_ERROR("dwc_otg_hcd_init failed\n"); ++ otg_dev->hcd = NULL; ++ goto fail; ++ } ++#endif ++ ++ /* ++ * Enable the global interrupt after all the interrupt ++ * handlers are installed. ++ */ ++ dwc_otg_enable_global_interrupts(otg_dev->core_if); ++ ++ return 0; ++ ++ fail: ++ dwc_otg_driver_remove(pdev); ++ return retval; ++} ++ ++/** ++ * This structure defines the methods to be called by a bus driver ++ * during the lifecycle of a device on that bus. Both drivers and ++ * devices are registered with a bus driver. The bus driver matches ++ * devices to drivers based on information in the device and driver ++ * structures. ++ * ++ * The probe function is called when the bus driver matches a device ++ * to this driver. The remove function is called when a device is ++ * unregistered with the bus driver. ++ */ ++ ++static const struct of_device_id ralink_otg_match[] = { ++ { .compatible = "ralink,rt3050-otg" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ralink_otg_match); ++ ++static struct platform_driver dwc_otg_driver = { ++ .driver = { ++ .name = (char *)dwc_driver_name, ++ .of_match_table = ralink_otg_match, ++ }, ++ .probe = dwc_otg_driver_probe, ++ .remove = dwc_otg_driver_remove, ++}; ++ ++/** ++ * This function is called when the dwc_otg_driver is installed with the ++ * insmod command. It registers the dwc_otg_driver structure with the ++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function ++ * to be called. In addition, the bus driver will automatically expose ++ * attributes defined for the device and driver in the special sysfs file ++ * system. ++ * ++ * @return ++ */ ++static int __init dwc_otg_driver_init(void) ++{ ++ int retval = 0; ++ int error; ++ ++ printk(KERN_INFO "%s: version %s\n", dwc_driver_name, DWC_DRIVER_VERSION); ++ ++ retval = platform_driver_register(&dwc_otg_driver); ++ if (retval) { ++ printk(KERN_ERR "%s retval=%d\n", __func__, retval); ++ return retval; ++ } ++ ++ error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_version); ++ error = driver_create_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); ++ ++ return retval; ++} ++module_init(dwc_otg_driver_init); ++ ++/** ++ * This function is called when the driver is removed from the kernel ++ * with the rmmod command. The driver unregisters itself with its bus ++ * driver. ++ * ++ */ ++static void __exit dwc_otg_driver_cleanup(void) ++{ ++ printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n"); ++ ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel); ++ driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version); ++ ++ platform_driver_unregister(&dwc_otg_driver); ++ ++ printk(KERN_INFO "%s module removed\n", dwc_driver_name); ++} ++module_exit(dwc_otg_driver_cleanup); ++ ++MODULE_DESCRIPTION(DWC_DRIVER_DESC); ++MODULE_AUTHOR("Synopsys Inc."); ++MODULE_LICENSE("GPL"); ++ ++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444); ++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None"); ++module_param_named(opt, dwc_otg_module_params.opt, int, 0444); ++MODULE_PARM_DESC(opt, "OPT Mode"); ++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444); ++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled"); ++ ++module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int, 0444); ++MODULE_PARM_DESC(dma_desc_enable, "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled"); ++ ++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int, 0444); ++MODULE_PARM_DESC(dma_burst_size, "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256"); ++module_param_named(speed, dwc_otg_module_params.speed, int, 0444); ++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed"); ++module_param_named(host_support_fs_ls_low_power, dwc_otg_module_params.host_support_fs_ls_low_power, int, 0444); ++MODULE_PARM_DESC(host_support_fs_ls_low_power, "Support Low Power w/FS or LS 0=Support 1=Don't Support"); ++module_param_named(host_ls_low_power_phy_clk, dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444); ++MODULE_PARM_DESC(host_ls_low_power_phy_clk, "Low Speed Low Power Clock 0=48Mhz 1=6Mhz"); ++module_param_named(enable_dynamic_fifo, dwc_otg_module_params.enable_dynamic_fifo, int, 0444); ++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing"); ++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int, 0444); ++MODULE_PARM_DESC(data_fifo_size, "Total number of words in the data FIFO memory 32-32768"); ++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size, int, 0444); ++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); ++module_param_named(dev_nperio_tx_fifo_size, dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(dev_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768"); ++module_param_named(dev_perio_tx_fifo_size_1, dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_2, dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_3, dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_4, dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_5, dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_6, dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_7, dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_8, dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_9, dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_10, dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_11, dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_12, dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_13, dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_14, dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(dev_perio_tx_fifo_size_15, dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444); ++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15, "Number of words in the periodic Tx FIFO 4-768"); ++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size, int, 0444); ++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768"); ++module_param_named(host_nperio_tx_fifo_size, dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(host_nperio_tx_fifo_size, "Number of words in the non-periodic Tx FIFO 16-32768"); ++module_param_named(host_perio_tx_fifo_size, dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444); ++MODULE_PARM_DESC(host_perio_tx_fifo_size, "Number of words in the host periodic Tx FIFO 16-32768"); ++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size, int, 0444); ++/** @todo Set the max to 512K, modify checks */ ++MODULE_PARM_DESC(max_transfer_size, "The maximum transfer size supported in bytes 2047-65535"); ++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count, int, 0444); ++MODULE_PARM_DESC(max_packet_count, "The maximum number of packets in a transfer 15-511"); ++module_param_named(host_channels, dwc_otg_module_params.host_channels, int, 0444); ++MODULE_PARM_DESC(host_channels, "The number of host channel registers to use 1-16"); ++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int, 0444); ++MODULE_PARM_DESC(dev_endpoints, "The number of endpoints in addition to EP0 available for device mode 1-15"); ++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444); ++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI"); ++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int, 0444); ++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits"); ++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444); ++MODULE_PARM_DESC(phy_ulpi_ddr, "ULPI at double or single data rate 0=Single 1=Double"); ++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus, int, 0444); ++MODULE_PARM_DESC(phy_ulpi_ext_vbus, "ULPI PHY using internal or external vbus 0=Internal"); ++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444); ++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface"); ++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444); ++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only"); ++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444); ++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs"); ++module_param_named(debug, g_dbg_lvl, int, 0444); ++MODULE_PARM_DESC(debug, ""); ++ ++module_param_named(en_multiple_tx_fifo, dwc_otg_module_params.en_multiple_tx_fifo, int, 0444); ++MODULE_PARM_DESC(en_multiple_tx_fifo, "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled"); ++module_param_named(dev_tx_fifo_size_1, dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_2, dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_3, dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_4, dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_5, dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_6, dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_7, dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_8, dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_9, dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_10, dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_11, dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_12, dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_13, dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_14, dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768"); ++module_param_named(dev_tx_fifo_size_15, dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444); ++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768"); ++ ++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444); ++MODULE_PARM_DESC(thr_ctl, "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled"); ++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int, 0444); ++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs"); ++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int, 0444); ++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs"); ++ ++module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444); ++MODULE_PARM_DESC(pti_enable, "Per Transfer Interrupt mode 0=disabled 1=enabled"); ++ ++module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444); ++MODULE_PARM_DESC(mpi_enable, "Multiprocessor Interrupt mode 0=disabled 1=enabled"); ++ ++/** @page "Module Parameters" ++ * ++ * The following parameters may be specified when starting the module. ++ * These parameters define how the DWC_otg controller should be ++ * configured. Parameter values are passed to the CIL initialization ++ * function dwc_otg_cil_init ++ * ++ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code> ++ * ++ ++ <table> ++ <tr><td>Parameter Name</td><td>Meaning</td></tr> ++ ++ <tr> ++ <td>otg_cap</td> ++ <td>Specifies the OTG capabilities. The driver will automatically detect the ++ value for this parameter if none is specified. ++ - 0: HNP and SRP capable (default, if available) ++ - 1: SRP Only capable ++ - 2: No HNP/SRP capable ++ </td></tr> ++ ++ <tr> ++ <td>dma_enable</td> ++ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Slave ++ - 1: DMA (default, if available) ++ </td></tr> ++ ++ <tr> ++ <td>dma_burst_size</td> ++ <td>The DMA Burst size (applicable only for External DMA Mode). ++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32) ++ </td></tr> ++ ++ <tr> ++ <td>speed</td> ++ <td>Specifies the maximum speed of operation in host and device mode. The ++ actual speed depends on the speed of the attached device and the value of ++ phy_type. ++ - 0: High Speed (default) ++ - 1: Full Speed ++ </td></tr> ++ ++ <tr> ++ <td>host_support_fs_ls_low_power</td> ++ <td>Specifies whether low power mode is supported when attached to a Full ++ Speed or Low Speed device in host mode. ++ - 0: Don't support low power mode (default) ++ - 1: Support low power mode ++ </td></tr> ++ ++ <tr> ++ <td>host_ls_low_power_phy_clk</td> ++ <td>Specifies the PHY clock rate in low power mode when connected to a Low ++ Speed device in host mode. This parameter is applicable only if ++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled. ++ - 0: 48 MHz (default) ++ - 1: 6 MHz ++ </td></tr> ++ ++ <tr> ++ <td>enable_dynamic_fifo</td> ++ <td> Specifies whether FIFOs may be resized by the driver software. ++ - 0: Use cC FIFO size parameters ++ - 1: Allow dynamic FIFO sizing (default) ++ </td></tr> ++ ++ <tr> ++ <td>data_fifo_size</td> ++ <td>Total number of 4-byte words in the data FIFO memory. This memory ++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs. ++ - Values: 32 to 32768 (default 8192) ++ ++ Note: The total FIFO memory depth in the FPGA configuration is 8192. ++ </td></tr> ++ ++ <tr> ++ <td>dev_rx_fifo_size</td> ++ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic ++ FIFO sizing is enabled. ++ - Values: 16 to 32768 (default 1064) ++ </td></tr> ++ ++ <tr> ++ <td>dev_nperio_tx_fifo_size</td> ++ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when ++ dynamic FIFO sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++ </td></tr> ++ ++ <tr> ++ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td> ++ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode ++ when dynamic FIFO sizing is enabled. ++ - Values: 4 to 768 (default 256) ++ </td></tr> ++ ++ <tr> ++ <td>host_rx_fifo_size</td> ++ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO ++ sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++ </td></tr> ++ ++ <tr> ++ <td>host_nperio_tx_fifo_size</td> ++ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when ++ dynamic FIFO sizing is enabled in the core. ++ - Values: 16 to 32768 (default 1024) ++ </td></tr> ++ ++ <tr> ++ <td>host_perio_tx_fifo_size</td> ++ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO ++ sizing is enabled. ++ - Values: 16 to 32768 (default 1024) ++ </td></tr> ++ ++ <tr> ++ <td>max_transfer_size</td> ++ <td>The maximum transfer size supported in bytes. ++ - Values: 2047 to 65,535 (default 65,535) ++ </td></tr> ++ ++ <tr> ++ <td>max_packet_count</td> ++ <td>The maximum number of packets in a transfer. ++ - Values: 15 to 511 (default 511) ++ </td></tr> ++ ++ <tr> ++ <td>host_channels</td> ++ <td>The number of host channel registers to use. ++ - Values: 1 to 16 (default 12) ++ ++ Note: The FPGA configuration supports a maximum of 12 host channels. ++ </td></tr> ++ ++ <tr> ++ <td>dev_endpoints</td> ++ <td>The number of endpoints in addition to EP0 available for device mode ++ operations. ++ - Values: 1 to 15 (default 6 IN and OUT) ++ ++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in ++ addition to EP0. ++ </td></tr> ++ ++ <tr> ++ <td>phy_type</td> ++ <td>Specifies the type of PHY interface to use. By default, the driver will ++ automatically detect the phy_type. ++ - 0: Full Speed ++ - 1: UTMI+ (default, if available) ++ - 2: ULPI ++ </td></tr> ++ ++ <tr> ++ <td>phy_utmi_width</td> ++ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a ++ phy_type of UTMI+. Also, this parameter is applicable only if the ++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the ++ core has been configured to work at either data path width. ++ - Values: 8 or 16 bits (default 16) ++ </td></tr> ++ ++ <tr> ++ <td>phy_ulpi_ddr</td> ++ <td>Specifies whether the ULPI operates at double or single data rate. This ++ parameter is only applicable if phy_type is ULPI. ++ - 0: single data rate ULPI interface with 8 bit wide data bus (default) ++ - 1: double data rate ULPI interface with 4 bit wide data bus ++ </td></tr> ++ ++ <tr> ++ <td>i2c_enable</td> ++ <td>Specifies whether to use the I2C interface for full speed PHY. This ++ parameter is only applicable if PHY_TYPE is FS. ++ - 0: Disabled (default) ++ - 1: Enabled ++ </td></tr> ++ ++ <tr> ++ <td>otg_en_multiple_tx_fifo</td> ++ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs. ++ The driver will automatically detect the value for this parameter if none is ++ specified. ++ - 0: Disabled ++ - 1: Enabled (default, if available) ++ </td></tr> ++ ++ <tr> ++ <td>dev_tx_fifo_size_n (n = 1 to 15)</td> ++ <td>Number of 4-byte words in each of the Tx FIFOs in device mode ++ when dynamic FIFO sizing is enabled. ++ - Values: 4 to 768 (default 256) ++ </td></tr> ++ ++*/ +diff --git a/drivers/usb/dwc_otg/dwc_otg_driver.h b/drivers/usb/dwc_otg/dwc_otg_driver.h +new file mode 100644 +index 0000000..fd7f0a4 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_driver.h +@@ -0,0 +1,83 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $ ++ * $Revision: 1.2 $ ++ * $Date: 2008-11-21 05:39:15 $ ++ * $Change: 1064918 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_DRIVER_H__ ++#define __DWC_OTG_DRIVER_H__ ++ ++/** @file ++ * This file contains the interface to the Linux driver. ++ */ ++#include "dwc_otg_cil.h" ++ ++/* Type declarations */ ++struct dwc_otg_pcd; ++struct dwc_otg_hcd; ++ ++/** ++ * This structure is a wrapper that encapsulates the driver components used to ++ * manage a single DWC_otg controller. ++ */ ++typedef struct dwc_otg_device { ++ /** Base address returned from ioremap() */ ++ void *base; ++ ++ struct device *parent; ++ ++ /** Pointer to the core interface structure. */ ++ dwc_otg_core_if_t *core_if; ++ ++ /** Register offset for Diagnostic API. */ ++ uint32_t reg_offset; ++ ++ /** Pointer to the PCD structure. */ ++ struct dwc_otg_pcd *pcd; ++ ++ /** Pointer to the HCD structure. */ ++ struct dwc_otg_hcd *hcd; ++ ++ /** Flag to indicate whether the common IRQ handler is installed. */ ++ uint8_t common_irq_installed; ++ ++ /* Interrupt request number. */ ++ unsigned int irq; ++ ++ /* Physical address of Control and Status registers, used by ++ * release_mem_region(). ++ */ ++ resource_size_t phys_addr; ++ ++ /* Length of memory region, used by release_mem_region(). */ ++ unsigned long base_len; ++} dwc_otg_device_t; ++ ++#endif +diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd.c b/drivers/usb/dwc_otg/dwc_otg_hcd.c +new file mode 100644 +index 0000000..fe643b6 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_hcd.c +@@ -0,0 +1,2852 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $ ++ * $Revision: 1.4 $ ++ * $Date: 2008-11-21 05:39:15 $ ++ * $Change: 1064940 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** ++ * @file ++ * ++ * This file contains the implementation of the HCD. In Linux, the HCD ++ * implements the hc_driver API. ++ */ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/errno.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/string.h> ++#include <linux/dma-mapping.h> ++#include <linux/version.h> ++ ++#include "dwc_otg_driver.h" ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++static const char dwc_otg_hcd_name[] = "dwc_otg"; ++ ++static const struct hc_driver dwc_otg_hc_driver = { ++ ++ .description = dwc_otg_hcd_name, ++ .product_desc = "DWC OTG Controller", ++ .hcd_priv_size = sizeof(dwc_otg_hcd_t), ++ ++ .irq = dwc_otg_hcd_irq, ++ ++ .flags = HCD_MEMORY | HCD_USB2, ++ ++ //.reset = ++ .start = dwc_otg_hcd_start, ++ //.suspend = ++ //.resume = ++ .stop = dwc_otg_hcd_stop, ++ ++ .urb_enqueue = dwc_otg_hcd_urb_enqueue, ++ .urb_dequeue = dwc_otg_hcd_urb_dequeue, ++ .endpoint_disable = dwc_otg_hcd_endpoint_disable, ++ ++ .get_frame_number = dwc_otg_hcd_get_frame_number, ++ ++ .hub_status_data = dwc_otg_hcd_hub_status_data, ++ .hub_control = dwc_otg_hcd_hub_control, ++ //.hub_suspend = ++ //.hub_resume = ++}; ++ ++/** ++ * Work queue function for starting the HCD when A-Cable is connected. ++ * The dwc_otg_hcd_start() must be called in a process context. ++ */ ++static void hcd_start_func( ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ void *_vp ++#else ++ struct work_struct *_work ++#endif ++ ) ++{ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ struct usb_hcd *usb_hcd = (struct usb_hcd *)_vp; ++#else ++ struct delayed_work *dw = container_of(_work, struct delayed_work, work); ++ struct dwc_otg_hcd *otg_hcd = container_of(dw, struct dwc_otg_hcd, start_work); ++ struct usb_hcd *usb_hcd = container_of((void *)otg_hcd, struct usb_hcd, hcd_priv); ++#endif ++ DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, usb_hcd); ++ if (usb_hcd) { ++ dwc_otg_hcd_start(usb_hcd); ++ } ++} ++ ++/** ++ * HCD Callback function for starting the HCD when A-Cable is ++ * connected. ++ * ++ * @param p void pointer to the <code>struct usb_hcd</code> ++ */ ++static int32_t dwc_otg_hcd_start_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p); ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ hprt0_data_t hprt0; ++ ++ if (core_if->op_state == B_HOST) { ++ /* ++ * Reset the port. During a HNP mode switch the reset ++ * needs to occur within 1ms and have a duration of at ++ * least 50ms. ++ */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtrst = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ ((struct usb_hcd *)p)->self.is_b_host = 1; ++ } else { ++ ((struct usb_hcd *)p)->self.is_b_host = 0; ++ } ++ ++ /* Need to start the HCD in a non-interrupt context. */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p); ++// INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func, p); ++#else ++// INIT_WORK(&dwc_otg_hcd->start_work, hcd_start_func); ++ INIT_DELAYED_WORK(&dwc_otg_hcd->start_work, hcd_start_func); ++#endif ++// schedule_work(&dwc_otg_hcd->start_work); ++ queue_delayed_work(core_if->wq_otg, &dwc_otg_hcd->start_work, 50 * HZ / 1000); ++ ++ return 1; ++} ++ ++/** ++ * HCD Callback function for stopping the HCD. ++ * ++ * @param p void pointer to the <code>struct usb_hcd</code> ++ */ ++static int32_t dwc_otg_hcd_stop_cb(void *p) ++{ ++ struct usb_hcd *usb_hcd = (struct usb_hcd *)p; ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); ++ dwc_otg_hcd_stop(usb_hcd); ++ return 1; ++} ++ ++static void del_xfer_timers(dwc_otg_hcd_t *hcd) ++{ ++#ifdef DEBUG ++ int i; ++ int num_channels = hcd->core_if->core_params->host_channels; ++ for (i = 0; i < num_channels; i++) { ++ del_timer(&hcd->core_if->hc_xfer_timer[i]); ++ } ++#endif ++} ++ ++static void del_timers(dwc_otg_hcd_t *hcd) ++{ ++ del_xfer_timers(hcd); ++ del_timer(&hcd->conn_timer); ++} ++ ++/** ++ * Processes all the URBs in a single list of QHs. Completes them with ++ * -ETIMEDOUT and frees the QTD. ++ */ ++static void kill_urbs_in_qh_list(dwc_otg_hcd_t *hcd, struct list_head *qh_list) ++{ ++ struct list_head *qh_item; ++ dwc_otg_qh_t *qh; ++ struct list_head *qtd_item; ++ dwc_otg_qtd_t *qtd; ++ ++ list_for_each(qh_item, qh_list) { ++ qh = list_entry(qh_item, dwc_otg_qh_t, qh_list_entry); ++ for (qtd_item = qh->qtd_list.next; ++ qtd_item != &qh->qtd_list; ++ qtd_item = qh->qtd_list.next) { ++ qtd = list_entry(qtd_item, dwc_otg_qtd_t, qtd_list_entry); ++ if (qtd->urb != NULL) { ++ dwc_otg_hcd_complete_urb(hcd, qtd->urb, ++ -ETIMEDOUT); ++ } ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd); ++ } ++ } ++} ++ ++/** ++ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic ++ * and periodic schedules. The QTD associated with each URB is removed from ++ * the schedule and freed. This function may be called when a disconnect is ++ * detected or when the HCD is being stopped. ++ */ ++static void kill_all_urbs(dwc_otg_hcd_t *hcd) ++{ ++ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive); ++ kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned); ++ kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued); ++} ++ ++/** ++ * HCD Callback function for disconnect of the HCD. ++ * ++ * @param p void pointer to the <code>struct usb_hcd</code> ++ */ ++static int32_t dwc_otg_hcd_disconnect_cb(void *p) ++{ ++ gintsts_data_t intr; ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p); ++ ++ //DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); ++ ++ /* ++ * Set status flags for the hub driver. ++ */ ++ dwc_otg_hcd->flags.b.port_connect_status_change = 1; ++ dwc_otg_hcd->flags.b.port_connect_status = 0; ++ ++ /* ++ * Shutdown any transfers in process by clearing the Tx FIFO Empty ++ * interrupt mask and status bits and disabling subsequent host ++ * channel interrupts. ++ */ ++ intr.d32 = 0; ++ intr.b.nptxfempty = 1; ++ intr.b.ptxfempty = 1; ++ intr.b.hcintr = 1; ++ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, intr.d32, 0); ++ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintsts, intr.d32, 0); ++ ++ del_timers(dwc_otg_hcd); ++ ++ /* ++ * Turn off the vbus power only if the core has transitioned to device ++ * mode. If still in host mode, need to keep power on to detect a ++ * reconnection. ++ */ ++ if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) { ++ if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) { ++ hprt0_data_t hprt0 = { .d32=0 }; ++ DWC_PRINT("Disconnect: PortPower off\n"); ++ hprt0.b.prtpwr = 0; ++ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32); ++ } ++ ++ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); ++ } ++ ++ /* Respond with an error status to all URBs in the schedule. */ ++ kill_all_urbs(dwc_otg_hcd); ++ ++ if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) { ++ /* Clean up any host channels that were in use. */ ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ dwc_otg_hc_regs_t *hc_regs; ++ hcchar_data_t hcchar; ++ ++ num_channels = dwc_otg_hcd->core_if->core_params->host_channels; ++ ++ if (!dwc_otg_hcd->core_if->dma_enable) { ++ /* Flush out any channel requests in slave mode. */ ++ for (i = 0; i < num_channels; i++) { ++ channel = dwc_otg_hcd->hc_ptr_array[i]; ++ if (list_empty(&channel->hc_list_entry)) { ++ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i]; ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ hcchar.b.chen = 0; ++ hcchar.b.chdis = 1; ++ hcchar.b.epdir = 0; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ } ++ } ++ } ++ } ++ ++ for (i = 0; i < num_channels; i++) { ++ channel = dwc_otg_hcd->hc_ptr_array[i]; ++ if (list_empty(&channel->hc_list_entry)) { ++ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[i]; ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ /* Halt the channel. */ ++ hcchar.b.chdis = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ } ++ ++ dwc_otg_hc_cleanup(dwc_otg_hcd->core_if, channel); ++ list_add_tail(&channel->hc_list_entry, ++ &dwc_otg_hcd->free_hc_list); ++ } ++ } ++ } ++ ++ /* A disconnect will end the session so the B-Device is no ++ * longer a B-host. */ ++ ((struct usb_hcd *)p)->self.is_b_host = 0; ++ return 1; ++} ++ ++/** ++ * Connection timeout function. An OTG host is required to display a ++ * message if the device does not connect within 10 seconds. ++ */ ++void dwc_otg_hcd_connect_timeout(unsigned long ptr) ++{ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%x)\n", __func__, (int)ptr); ++ DWC_PRINT("Connect Timeout\n"); ++ DWC_ERROR("Device Not Connected/Responding\n"); ++} ++ ++/** ++ * Start the connection timer. An OTG host is required to display a ++ * message if the device does not connect within 10 seconds. The ++ * timer is deleted if a port connect interrupt occurs before the ++ * timer expires. ++ */ ++static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t *hcd) ++{ ++ init_timer(&hcd->conn_timer); ++ hcd->conn_timer.function = dwc_otg_hcd_connect_timeout; ++ hcd->conn_timer.data = 0; ++ hcd->conn_timer.expires = jiffies + (HZ * 10); ++ add_timer(&hcd->conn_timer); ++} ++ ++/** ++ * HCD Callback function for disconnect of the HCD. ++ * ++ * @param p void pointer to the <code>struct usb_hcd</code> ++ */ ++static int32_t dwc_otg_hcd_session_start_cb(void *p) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(p); ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p); ++ dwc_otg_hcd_start_connect_timer(dwc_otg_hcd); ++ return 1; ++} ++ ++/** ++ * HCD Callback structure for handling mode switching. ++ */ ++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = { ++ .start = dwc_otg_hcd_start_cb, ++ .stop = dwc_otg_hcd_stop_cb, ++ .disconnect = dwc_otg_hcd_disconnect_cb, ++ .session_start = dwc_otg_hcd_session_start_cb, ++ .p = 0, ++}; ++ ++/** ++ * Reset tasklet function ++ */ ++static void reset_tasklet_func(unsigned long data) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *)data; ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ hprt0_data_t hprt0; ++ ++ DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n"); ++ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtrst = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ mdelay(60); ++ ++ hprt0.b.prtrst = 0; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ dwc_otg_hcd->flags.b.port_reset_change = 1; ++} ++ ++static struct tasklet_struct reset_tasklet = { ++ .next = NULL, ++ .state = 0, ++ .count = ATOMIC_INIT(0), ++ .func = reset_tasklet_func, ++ .data = 0, ++}; ++ ++/** ++ * Initializes the HCD. This function allocates memory for and initializes the ++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the ++ * USB bus with the core and calls the hc_driver->start() function. It returns ++ * a negative error on failure. ++ */ ++int dwc_otg_hcd_init(struct device *dev) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(dev); ++ struct usb_hcd *hcd = NULL; ++ dwc_otg_hcd_t *dwc_otg_hcd = NULL; ++ ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ ++ int retval = 0; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT\n"); ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ /* 2.6.20+ requires dev.dma_mask to be set prior to calling usb_create_hcd() */ ++ ++ /* Set device flags indicating whether the HCD supports DMA. */ ++ if (otg_dev->core_if->dma_enable) { ++ DWC_PRINT("Using DMA mode\n"); ++ dev->dma_mask = (void *)~0; ++ dev->coherent_dma_mask = ~0; ++ ++ if (otg_dev->core_if->dma_desc_enable) { ++ DWC_PRINT("Device using Descriptor DMA mode\n"); ++ } else { ++ DWC_PRINT("Device using Buffer DMA mode\n"); ++ } ++ } else { ++ DWC_PRINT("Using Slave mode\n"); ++ dev->dma_mask = (void *)0; ++ dev->coherent_dma_mask = 0; ++ } ++#endif ++ /* ++ * Allocate memory for the base HCD plus the DWC OTG HCD. ++ * Initialize the base HCD. ++ */ ++ hcd = usb_create_hcd(&dwc_otg_hc_driver, dev, dev_name(dev)); ++ if (!hcd) { ++ retval = -ENOMEM; ++ goto error1; ++ } ++ ++ dev_set_drvdata(dev, otg_dev); ++ hcd->regs = otg_dev->base; ++ hcd->rsrc_start = otg_dev->phys_addr; ++ hcd->rsrc_len = otg_dev->base_len; ++ hcd->self.otg_port = 1; ++ hcd->has_tt = 1; ++ ++ /* Initialize the DWC OTG HCD. */ ++ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ dwc_otg_hcd->core_if = otg_dev->core_if; ++ otg_dev->hcd = dwc_otg_hcd; ++ ++ /* */ ++ spin_lock_init(&dwc_otg_hcd->lock); ++ ++ /* Register the HCD CIL Callbacks */ ++ dwc_otg_cil_register_hcd_callbacks(otg_dev->core_if, ++ &hcd_cil_callbacks, hcd); ++ ++ /* Initialize the non-periodic schedule. */ ++ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_inactive); ++ INIT_LIST_HEAD(&dwc_otg_hcd->non_periodic_sched_active); ++ ++ /* Initialize the periodic schedule. */ ++ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_inactive); ++ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_ready); ++ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_assigned); ++ INIT_LIST_HEAD(&dwc_otg_hcd->periodic_sched_queued); ++ ++ /* ++ * Create a host channel descriptor for each host channel implemented ++ * in the controller. Initialize the channel descriptor array. ++ */ ++ INIT_LIST_HEAD(&dwc_otg_hcd->free_hc_list); ++ num_channels = dwc_otg_hcd->core_if->core_params->host_channels; ++ memset(dwc_otg_hcd->hc_ptr_array, 0, sizeof(dwc_otg_hcd->hc_ptr_array)); ++ for (i = 0; i < num_channels; i++) { ++ channel = kmalloc(sizeof(dwc_hc_t), GFP_KERNEL); ++ if (channel == NULL) { ++ retval = -ENOMEM; ++ DWC_ERROR("%s: host channel allocation failed\n", __func__); ++ goto error2; ++ } ++ memset(channel, 0, sizeof(dwc_hc_t)); ++ channel->hc_num = i; ++ dwc_otg_hcd->hc_ptr_array[i] = channel; ++#ifdef DEBUG ++ init_timer(&dwc_otg_hcd->core_if->hc_xfer_timer[i]); ++#endif ++ DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i, channel); ++ } ++ ++ /* Initialize the Connection timeout timer. */ ++ init_timer(&dwc_otg_hcd->conn_timer); ++ ++ /* Initialize reset tasklet. */ ++ reset_tasklet.data = (unsigned long) dwc_otg_hcd; ++ dwc_otg_hcd->reset_tasklet = &reset_tasklet; ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ /* Set device flags indicating whether the HCD supports DMA. */ ++ if (otg_dev->core_if->dma_enable) { ++ DWC_PRINT("Using DMA mode\n"); ++ dev->dma_mask = (void *)~0; ++ dev->coherent_dma_mask = ~0; ++ ++ if (otg_dev->core_if->dma_desc_enable){ ++ DWC_PRINT("Device using Descriptor DMA mode\n"); ++ } else { ++ DWC_PRINT("Device using Buffer DMA mode\n"); ++ } ++ } else { ++ DWC_PRINT("Using Slave mode\n"); ++ dev->dma_mask = (void *)0; ++ dev->dev.coherent_dma_mask = 0; ++ } ++#endif ++ /* ++ * Finish generic HCD initialization and start the HCD. This function ++ * allocates the DMA buffer pool, registers the USB bus, requests the ++ * IRQ line, and calls dwc_otg_hcd_start method. ++ */ ++ retval = usb_add_hcd(hcd, otg_dev->irq, IRQF_SHARED); ++ if (retval < 0) { ++ goto error2; ++ } ++ ++ /* ++ * Allocate space for storing data on status transactions. Normally no ++ * data is sent, but this space acts as a bit bucket. This must be ++ * done after usb_add_hcd since that function allocates the DMA buffer ++ * pool. ++ */ ++ if (otg_dev->core_if->dma_enable) { ++ dwc_otg_hcd->status_buf = ++ dma_alloc_coherent(dev, ++ DWC_OTG_HCD_STATUS_BUF_SIZE, ++ &dwc_otg_hcd->status_buf_dma, ++ GFP_KERNEL | GFP_DMA); ++ } else { ++ dwc_otg_hcd->status_buf = kmalloc(DWC_OTG_HCD_STATUS_BUF_SIZE, ++ GFP_KERNEL); ++ } ++ if (!dwc_otg_hcd->status_buf) { ++ retval = -ENOMEM; ++ DWC_ERROR("%s: status_buf allocation failed\n", __func__); ++ goto error3; ++ } ++ ++ dwc_otg_hcd->otg_dev = otg_dev; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Initialized HCD, bus=%s, usbbus=%d\n", ++ dev_name(dev), hcd->self.busnum); ++ ++ return 0; ++ ++ /* Error conditions */ ++ error3: ++ usb_remove_hcd(hcd); ++ error2: ++ dwc_otg_hcd_free(hcd); ++ usb_put_hcd(hcd); ++ ++ /* FIXME: 2008/05/03 by Steven ++ * write back to device: ++ * dwc_otg_hcd has already been released by dwc_otg_hcd_free() ++ */ ++ dev_set_drvdata(dev, otg_dev); ++ ++ error1: ++ return retval; ++} ++ ++/** ++ * Removes the HCD. ++ * Frees memory and resources associated with the HCD and deregisters the bus. ++ */ ++void dwc_otg_hcd_remove(struct device *dev) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(dev); ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ struct usb_hcd *hcd; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE\n"); ++ ++ if (!otg_dev) { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__); ++ return; ++ } ++ ++ dwc_otg_hcd = otg_dev->hcd; ++ ++ if (!dwc_otg_hcd) { ++ DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__); ++ return; ++ } ++ ++ hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd); ++ ++ if (!hcd) { ++ DWC_DEBUGPL(DBG_ANY, "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n", __func__); ++ return; ++ } ++ ++ /* Turn off all interrupts */ ++ dwc_write_reg32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk, 0); ++ dwc_modify_reg32(&dwc_otg_hcd->core_if->core_global_regs->gahbcfg, 1, 0); ++ ++ usb_remove_hcd(hcd); ++ dwc_otg_hcd_free(hcd); ++ usb_put_hcd(hcd); ++} ++ ++/* ========================================================================= ++ * Linux HC Driver Functions ++ * ========================================================================= */ ++ ++/** ++ * Initializes dynamic portions of the DWC_otg HCD state. ++ */ ++static void hcd_reinit(dwc_otg_hcd_t *hcd) ++{ ++ struct list_head *item; ++ int num_channels; ++ int i; ++ dwc_hc_t *channel; ++ ++ hcd->flags.d32 = 0; ++ ++ hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active; ++ hcd->non_periodic_channels = 0; ++ hcd->periodic_channels = 0; ++ ++ /* ++ * Put all channels in the free channel list and clean up channel ++ * states. ++ */ ++ item = hcd->free_hc_list.next; ++ while (item != &hcd->free_hc_list) { ++ list_del(item); ++ item = hcd->free_hc_list.next; ++ } ++ num_channels = hcd->core_if->core_params->host_channels; ++ for (i = 0; i < num_channels; i++) { ++ channel = hcd->hc_ptr_array[i]; ++ list_add_tail(&channel->hc_list_entry, &hcd->free_hc_list); ++ dwc_otg_hc_cleanup(hcd->core_if, channel); ++ } ++ ++ /* Initialize the DWC core for host mode operation. */ ++ dwc_otg_core_host_init(hcd->core_if); ++} ++ ++/** Initializes the DWC_otg controller and its root hub and prepares it for host ++ * mode operation. Activates the root port. Returns 0 on success and a negative ++ * error code on failure. */ ++int dwc_otg_hcd_start(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ struct usb_bus *bus; ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ struct usb_device *udev; ++ int retval; ++#endif ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n"); ++ ++ bus = hcd_to_bus(hcd); ++ ++ /* Initialize the bus state. If the core is in Device Mode ++ * HALT the USB bus and return. */ ++ if (dwc_otg_is_device_mode(core_if)) { ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ hcd->state = HC_STATE_HALT; ++#else ++ hcd->state = HC_STATE_RUNNING; ++#endif ++ return 0; ++ } ++ hcd->state = HC_STATE_RUNNING; ++ ++ /* Initialize and connect root hub if one is not already attached */ ++ if (bus->root_hub) { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n"); ++ /* Inform the HUB driver to resume. */ ++ usb_hcd_resume_root_hub(hcd); ++ } ++ else { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Does Not Have Root Hub\n"); ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ udev = usb_alloc_dev(NULL, bus, 0); ++ udev->speed = USB_SPEED_HIGH; ++ if (!udev) { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error udev alloc\n"); ++ return -ENODEV; ++ } ++ if ((retval = usb_hcd_register_root_hub(udev, hcd)) != 0) { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Error registering %d\n", retval); ++ return -ENODEV; ++ } ++#endif ++ } ++ ++ hcd_reinit(dwc_otg_hcd); ++ ++ return 0; ++} ++ ++static void qh_list_free(dwc_otg_hcd_t *hcd, struct list_head *qh_list) ++{ ++ struct list_head *item; ++ dwc_otg_qh_t *qh; ++ ++ if (!qh_list->next) { ++ /* The list hasn't been initialized yet. */ ++ return; ++ } ++ ++ /* Ensure there are no QTDs or URBs left. */ ++ kill_urbs_in_qh_list(hcd, qh_list); ++ ++ for (item = qh_list->next; item != qh_list; item = qh_list->next) { ++ qh = list_entry(item, dwc_otg_qh_t, qh_list_entry); ++ dwc_otg_hcd_qh_remove_and_free(hcd, qh); ++ } ++} ++ ++/** ++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are ++ * stopped. ++ */ ++void dwc_otg_hcd_stop(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ hprt0_data_t hprt0 = { .d32=0 }; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n"); ++ ++ /* Turn off all host-specific interrupts. */ ++ dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if); ++ ++ /* ++ * The root hub should be disconnected before this function is called. ++ * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue) ++ * and the QH lists (via ..._hcd_endpoint_disable). ++ */ ++ ++ /* Turn off the vbus power */ ++ DWC_PRINT("PortPower off\n"); ++ hprt0.b.prtpwr = 0; ++ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0.d32); ++} ++ ++/** Returns the current frame number. */ ++int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ hfnum_data_t hfnum; ++ ++ hfnum.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if-> ++ host_if->host_global_regs->hfnum); ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n", hfnum.b.frnum); ++#endif ++ return hfnum.b.frnum; ++} ++ ++/** ++ * Frees secondary storage associated with the dwc_otg_hcd structure contained ++ * in the struct usb_hcd field. ++ */ ++void dwc_otg_hcd_free(struct usb_hcd *hcd) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ int i; ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n"); ++ ++ del_timers(dwc_otg_hcd); ++ ++ /* Free memory for QH/QTD lists */ ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned); ++ qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued); ++ ++ /* Free memory for the host channels. */ ++ for (i = 0; i < MAX_EPS_CHANNELS; i++) { ++ dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i]; ++ if (hc != NULL) { ++ DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n", i, hc); ++ kfree(hc); ++ } ++ } ++ ++ if (dwc_otg_hcd->core_if->dma_enable) { ++ if (dwc_otg_hcd->status_buf_dma) { ++ dma_free_coherent(hcd->self.controller, ++ DWC_OTG_HCD_STATUS_BUF_SIZE, ++ dwc_otg_hcd->status_buf, ++ dwc_otg_hcd->status_buf_dma); ++ } ++ } else if (dwc_otg_hcd->status_buf != NULL) { ++ kfree(dwc_otg_hcd->status_buf); ++ } ++} ++ ++#ifdef DEBUG ++static void dump_urb_info(struct urb *urb, char* fn_name) ++{ ++ DWC_PRINT("%s, urb %p\n", fn_name, urb); ++ DWC_PRINT(" Device address: %d\n", usb_pipedevice(urb->pipe)); ++ DWC_PRINT(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), ++ (usb_pipein(urb->pipe) ? "IN" : "OUT")); ++ DWC_PRINT(" Endpoint type: %s\n", ++ ({char *pipetype; ++ switch (usb_pipetype(urb->pipe)) { ++ case PIPE_CONTROL: pipetype = "CONTROL"; break; ++ case PIPE_BULK: pipetype = "BULK"; break; ++ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break; ++ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break; ++ default: pipetype = "UNKNOWN"; break; ++ }; pipetype;})); ++ DWC_PRINT(" Speed: %s\n", ++ ({char *speed; ++ switch (urb->dev->speed) { ++ case USB_SPEED_HIGH: speed = "HIGH"; break; ++ case USB_SPEED_FULL: speed = "FULL"; break; ++ case USB_SPEED_LOW: speed = "LOW"; break; ++ default: speed = "UNKNOWN"; break; ++ }; speed;})); ++ DWC_PRINT(" Max packet size: %d\n", ++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); ++ DWC_PRINT(" Data buffer length: %d\n", urb->transfer_buffer_length); ++ DWC_PRINT(" Transfer buffer: %p, Transfer DMA: %p\n", ++ urb->transfer_buffer, (void *)urb->transfer_dma); ++ DWC_PRINT(" Setup buffer: %p, Setup DMA: %p\n", ++ urb->setup_packet, (void *)urb->setup_dma); ++ DWC_PRINT(" Interval: %d\n", urb->interval); ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ for (i = 0; i < urb->number_of_packets; i++) { ++ DWC_PRINT(" ISO Desc %d:\n", i); ++ DWC_PRINT(" offset: %d, length %d\n", ++ urb->iso_frame_desc[i].offset, ++ urb->iso_frame_desc[i].length); ++ } ++ } ++} ++ ++static void dump_channel_info(dwc_otg_hcd_t *hcd, ++ dwc_otg_qh_t *qh) ++{ ++ if (qh->channel != NULL) { ++ dwc_hc_t *hc = qh->channel; ++ struct list_head *item; ++ dwc_otg_qh_t *qh_item; ++ int num_channels = hcd->core_if->core_params->host_channels; ++ int i; ++ ++ dwc_otg_hc_regs_t *hc_regs; ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ hctsiz_data_t hctsiz; ++ uint32_t hcdma; ++ ++ hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num]; ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ hcdma = dwc_read_reg32(&hc_regs->hcdma); ++ ++ DWC_PRINT(" Assigned to channel %p:\n", hc); ++ DWC_PRINT(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); ++ DWC_PRINT(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); ++ DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", ++ hc->dev_addr, hc->ep_num, hc->ep_is_in); ++ DWC_PRINT(" ep_type: %d\n", hc->ep_type); ++ DWC_PRINT(" max_packet: %d\n", hc->max_packet); ++ DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start); ++ DWC_PRINT(" xfer_started: %d\n", hc->xfer_started); ++ DWC_PRINT(" halt_status: %d\n", hc->halt_status); ++ DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff); ++ DWC_PRINT(" xfer_len: %d\n", hc->xfer_len); ++ DWC_PRINT(" qh: %p\n", hc->qh); ++ DWC_PRINT(" NP inactive sched:\n"); ++ list_for_each(item, &hcd->non_periodic_sched_inactive) { ++ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); ++ DWC_PRINT(" %p\n", qh_item); ++ } ++ DWC_PRINT(" NP active sched:\n"); ++ list_for_each(item, &hcd->non_periodic_sched_active) { ++ qh_item = list_entry(item, dwc_otg_qh_t, qh_list_entry); ++ DWC_PRINT(" %p\n", qh_item); ++ } ++ DWC_PRINT(" Channels: \n"); ++ for (i = 0; i < num_channels; i++) { ++ dwc_hc_t *hc = hcd->hc_ptr_array[i]; ++ DWC_PRINT(" %2d: %p\n", i, hc); ++ } ++ } ++} ++#endif ++ ++/** Starts processing a USB transfer request specified by a USB Request Block ++ * (URB). mem_flags indicates the type of memory allocation to use while ++ * processing this URB. */ ++int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd, ++ struct urb *urb, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ int mem_flags ++#else ++ gfp_t mem_flags ++#endif ++ ) ++{ ++ int retval = 0; ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ dwc_otg_qtd_t *qtd; ++ ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ dump_urb_info(urb, "dwc_otg_hcd_urb_enqueue"); ++ } ++#endif ++ if (!dwc_otg_hcd->flags.b.port_connect_status) { ++ /* No longer connected. */ ++ return -ENODEV; ++ } ++ ++ qtd = dwc_otg_hcd_qtd_create(urb); ++ if (qtd == NULL) { ++ DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n"); ++ return -ENOMEM; ++ } ++ ++ retval = dwc_otg_hcd_qtd_add(qtd, dwc_otg_hcd); ++ if (retval < 0) { ++ DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. " ++ "Error status %d\n", retval); ++ dwc_otg_hcd_qtd_free(qtd); ++ } ++ ++ return retval; ++} ++ ++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate ++ * success. */ ++int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd, ++ struct urb *urb, ++ int status) ++{ ++ unsigned long flags; ++ dwc_otg_hcd_t *dwc_otg_hcd; ++ dwc_otg_qtd_t *urb_qtd; ++ dwc_otg_qh_t *qh; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb); ++#endif ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n"); ++ ++ dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags); ++ ++ urb_qtd = (dwc_otg_qtd_t *)urb->hcpriv; ++ qh = (dwc_otg_qh_t *)ep->hcpriv; ++ ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ dump_urb_info(urb, "dwc_otg_hcd_urb_dequeue"); ++ if (urb_qtd == qh->qtd_in_process) { ++ dump_channel_info(dwc_otg_hcd, qh); ++ } ++ } ++#endif ++ ++ if (urb_qtd == qh->qtd_in_process) { ++ /* The QTD is in process (it has been assigned to a channel). */ ++ ++ if (dwc_otg_hcd->flags.b.port_connect_status) { ++ /* ++ * If still connected (i.e. in host mode), halt the ++ * channel so it can be used for other transfers. If ++ * no longer connected, the host registers can't be ++ * written to halt the channel since the core is in ++ * device mode. ++ */ ++ dwc_otg_hc_halt(dwc_otg_hcd->core_if, qh->channel, ++ DWC_OTG_HC_XFER_URB_DEQUEUE); ++ } ++ } ++ ++ /* ++ * Free the QTD and clean up the associated QH. Leave the QH in the ++ * schedule if it has any remaining QTDs. ++ */ ++ dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd, urb_qtd); ++ if (urb_qtd == qh->qtd_in_process) { ++ dwc_otg_hcd_qh_deactivate(dwc_otg_hcd, qh, 0); ++ qh->channel = NULL; ++ qh->qtd_in_process = NULL; ++ } else if (list_empty(&qh->qtd_list)) { ++ dwc_otg_hcd_qh_remove(dwc_otg_hcd, qh); ++ } ++ ++ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); ++ ++ urb->hcpriv = NULL; ++ ++ /* Higher layer software sets URB status. */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ usb_hcd_giveback_urb(hcd, urb, status); ++#else ++ usb_hcd_giveback_urb(hcd, urb, NULL); ++#endif ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ DWC_PRINT("Called usb_hcd_giveback_urb()\n"); ++ DWC_PRINT(" urb->status = %d\n", urb->status); ++ } ++ ++ return 0; ++} ++ ++/** Frees resources in the DWC_otg controller related to a given endpoint. Also ++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint ++ * must already be dequeued. */ ++void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd, ++ struct usb_host_endpoint *ep) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ dwc_otg_qh_t *qh; ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ unsigned long flags; ++ int retry = 0; ++#endif ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, " ++ "endpoint=%d\n", ep->desc.bEndpointAddress, ++ dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress)); ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++rescan: ++ SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags); ++ qh = (dwc_otg_qh_t *)(ep->hcpriv); ++ if (!qh) ++ goto done; ++ ++ /** Check that the QTD list is really empty */ ++ if (!list_empty(&qh->qtd_list)) { ++ if (retry++ < 250) { ++ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); ++ schedule_timeout_uninterruptible(1); ++ goto rescan; ++ } ++ ++ DWC_WARN("DWC OTG HCD EP DISABLE:" ++ " QTD List for this endpoint is not empty\n"); ++ } ++ ++ dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh); ++ ep->hcpriv = NULL; ++done: ++ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); ++ ++#else // LINUX_VERSION_CODE ++ ++ qh = (dwc_otg_qh_t *)(ep->hcpriv); ++ if (qh != NULL) { ++#ifdef DEBUG ++ /** Check that the QTD list is really empty */ ++ if (!list_empty(&qh->qtd_list)) { ++ DWC_WARN("DWC OTG HCD EP DISABLE:" ++ " QTD List for this endpoint is not empty\n"); ++ } ++#endif ++ dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd, qh); ++ ep->hcpriv = NULL; ++ } ++#endif // LINUX_VERSION_CODE ++} ++ ++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if ++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid ++ * interrupt. ++ * ++ * This function is called by the USB core when an interrupt occurs */ ++irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) ++ , struct pt_regs *regs ++#endif ++ ) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ return IRQ_RETVAL(dwc_otg_hcd_handle_intr(dwc_otg_hcd)); ++} ++ ++/** Creates Status Change bitmap for the root hub and root port. The bitmap is ++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1 ++ * is the status change indicator for the single root port. Returns 1 if either ++ * change indicator is 1, otherwise returns 0. */ ++int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, char *buf) ++{ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ ++ buf[0] = 0; ++ buf[0] |= (dwc_otg_hcd->flags.b.port_connect_status_change || ++ dwc_otg_hcd->flags.b.port_reset_change || ++ dwc_otg_hcd->flags.b.port_enable_change || ++ dwc_otg_hcd->flags.b.port_suspend_change || ++ dwc_otg_hcd->flags.b.port_over_current_change) << 1; ++ ++#ifdef DEBUG ++ if (buf[0]) { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:" ++ " Root port status changed\n"); ++ DWC_DEBUGPL(DBG_HCDV, " port_connect_status_change: %d\n", ++ dwc_otg_hcd->flags.b.port_connect_status_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_reset_change: %d\n", ++ dwc_otg_hcd->flags.b.port_reset_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_enable_change: %d\n", ++ dwc_otg_hcd->flags.b.port_enable_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_suspend_change: %d\n", ++ dwc_otg_hcd->flags.b.port_suspend_change); ++ DWC_DEBUGPL(DBG_HCDV, " port_over_current_change: %d\n", ++ dwc_otg_hcd->flags.b.port_over_current_change); ++ } ++#endif ++ return (buf[0] != 0); ++} ++ ++#ifdef DWC_HS_ELECT_TST ++/* ++ * Quick and dirty hack to implement the HS Electrical Test ++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature. ++ * ++ * This code was copied from our userspace app "hset". It sends a ++ * Get Device Descriptor control sequence in two parts, first the ++ * Setup packet by itself, followed some time later by the In and ++ * Ack packets. Rather than trying to figure out how to add this ++ * functionality to the normal driver code, we just hijack the ++ * hardware, using these two function to drive the hardware ++ * directly. ++ */ ++ ++dwc_otg_core_global_regs_t *global_regs; ++dwc_otg_host_global_regs_t *hc_global_regs; ++dwc_otg_hc_regs_t *hc_regs; ++uint32_t *data_fifo; ++ ++static void do_setup(void) ++{ ++ gintsts_data_t gintsts; ++ hctsiz_data_t hctsiz; ++ hcchar_data_t hcchar; ++ haint_data_t haint; ++ hcint_data_t hcint; ++ ++ /* Enable HAINTs */ ++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); ++ ++ /* Enable HCINTs */ ++ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ //fprintf(stderr, "HAINT: %08x\n", haint.d32); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); ++ ++ /* ++ * Send Setup packet (Get Device Descriptor) ++ */ ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ //fprintf(stderr, "Channel already enabled 1, HCCHAR = %08x\n", hcchar.d32); ++ hcchar.b.chdis = 1; ++// hcchar.b.chen = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ //fprintf(stderr, "HAINT: %08x\n", haint.d32); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ //if (hcchar.b.chen) { ++ // fprintf(stderr, "** Channel _still_ enabled 1, HCCHAR = %08x **\n", hcchar.d32); ++ //} ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 8; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_SETUP; ++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 0; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ ++ /* Fill FIFO with Setup data for Get Device Descriptor */ ++ data_fifo = (uint32_t *)((char *)global_regs + 0x1000); ++ dwc_write_reg32(data_fifo++, 0x01000680); ++ dwc_write_reg32(data_fifo++, 0x00080000); ++ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "Waiting for HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ //fprintf(stderr, "Got HCINTR intr 1, GINTSTS = %08x\n", gintsts.d32); ++ ++ /* Disable HCINTs */ ++ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); ++ ++ /* Disable HAINTs */ ++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ //fprintf(stderr, "HAINT: %08x\n", haint.d32); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); ++} ++ ++static void do_in_ack(void) ++{ ++ gintsts_data_t gintsts; ++ hctsiz_data_t hctsiz; ++ hcchar_data_t hcchar; ++ haint_data_t haint; ++ hcint_data_t hcint; ++ host_grxsts_data_t grxsts; ++ ++ /* Enable HAINTs */ ++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0001); ++ ++ /* Enable HCINTs */ ++ dwc_write_reg32(&hc_regs->hcintmsk, 0x04a3); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ //fprintf(stderr, "HAINT: %08x\n", haint.d32); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); ++ ++ /* ++ * Receive Control In packet ++ */ ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ //fprintf(stderr, "Channel already enabled 2, HCCHAR = %08x\n", hcchar.d32); ++ hcchar.b.chdis = 1; ++ hcchar.b.chen = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ //fprintf(stderr, "HAINT: %08x\n", haint.d32); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ //if (hcchar.b.chen) { ++ // fprintf(stderr, "** Channel _still_ enabled 2, HCCHAR = %08x **\n", hcchar.d32); ++ //} ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 8; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; ++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 1; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "Waiting for RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); ++ ++ /* Wait for receive status queue interrupt */ ++ do { ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ } while (gintsts.b.rxstsqlvl == 0); ++ ++ //fprintf(stderr, "Got RXSTSQLVL intr 1, GINTSTS = %08x\n", gintsts.d32); ++ ++ /* Read RXSTS */ ++ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); ++ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); ++ ++ /* Clear RXSTSQLVL in GINTSTS */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN: ++ /* Read the data into the host buffer */ ++ if (grxsts.b.bcnt > 0) { ++ int i; ++ int word_count = (grxsts.b.bcnt + 3) / 4; ++ ++ data_fifo = (uint32_t *)((char *)global_regs + 0x1000); ++ ++ for (i = 0; i < word_count; i++) { ++ (void)dwc_read_reg32(data_fifo++); ++ } ++ } ++ ++ //fprintf(stderr, "Received %u bytes\n", (unsigned)grxsts.b.bcnt); ++ break; ++ ++ default: ++ //fprintf(stderr, "** Unexpected GRXSTS packet status 1 **\n"); ++ break; ++ } ++ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "Waiting for RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); ++ ++ /* Wait for receive status queue interrupt */ ++ do { ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ } while (gintsts.b.rxstsqlvl == 0); ++ ++ //fprintf(stderr, "Got RXSTSQLVL intr 2, GINTSTS = %08x\n", gintsts.d32); ++ ++ /* Read RXSTS */ ++ grxsts.d32 = dwc_read_reg32(&global_regs->grxstsp); ++ //fprintf(stderr, "GRXSTS: %08x\n", grxsts.d32); ++ ++ /* Clear RXSTSQLVL in GINTSTS */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: ++ break; ++ ++ default: ++ //fprintf(stderr, "** Unexpected GRXSTS packet status 2 **\n"); ++ break; ++ } ++ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "Waiting for HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ //fprintf(stderr, "Got HCINTR intr 2, GINTSTS = %08x\n", gintsts.d32); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ //fprintf(stderr, "HAINT: %08x\n", haint.d32); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); ++ ++// usleep(100000); ++// mdelay(100); ++ mdelay(1); ++ ++ /* ++ * Send handshake packet ++ */ ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ //fprintf(stderr, "HAINT: %08x\n", haint.d32); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); ++ ++ /* Make sure channel is disabled */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chen) { ++ //fprintf(stderr, "Channel already enabled 3, HCCHAR = %08x\n", hcchar.d32); ++ hcchar.b.chdis = 1; ++ hcchar.b.chen = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ //sleep(1); ++ mdelay(1000); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ //fprintf(stderr, "HAINT: %08x\n", haint.d32); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ //if (hcchar.b.chen) { ++ // fprintf(stderr, "** Channel _still_ enabled 3, HCCHAR = %08x **\n", hcchar.d32); ++ //} ++ } ++ ++ /* Set HCTSIZ */ ++ hctsiz.d32 = 0; ++ hctsiz.b.xfersize = 0; ++ hctsiz.b.pktcnt = 1; ++ hctsiz.b.pid = DWC_OTG_HC_PID_DATA1; ++ dwc_write_reg32(&hc_regs->hctsiz, hctsiz.d32); ++ ++ /* Set HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL; ++ hcchar.b.epdir = 0; ++ hcchar.b.epnum = 0; ++ hcchar.b.mps = 8; ++ hcchar.b.chen = 1; ++ dwc_write_reg32(&hc_regs->hcchar, hcchar.d32); ++ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "Waiting for HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); ++ ++ /* Wait for host channel interrupt */ ++ do { ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ } while (gintsts.b.hcintr == 0); ++ ++ //fprintf(stderr, "Got HCINTR intr 3, GINTSTS = %08x\n", gintsts.d32); ++ ++ /* Disable HCINTs */ ++ dwc_write_reg32(&hc_regs->hcintmsk, 0x0000); ++ ++ /* Disable HAINTs */ ++ dwc_write_reg32(&hc_global_regs->haintmsk, 0x0000); ++ ++ /* Read HAINT */ ++ haint.d32 = dwc_read_reg32(&hc_global_regs->haint); ++ //fprintf(stderr, "HAINT: %08x\n", haint.d32); ++ ++ /* Read HCINT */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ //fprintf(stderr, "HCINT: %08x\n", hcint.d32); ++ ++ /* Read HCCHAR */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ //fprintf(stderr, "HCCHAR: %08x\n", hcchar.d32); ++ ++ /* Clear HCINT */ ++ dwc_write_reg32(&hc_regs->hcint, hcint.d32); ++ ++ /* Clear HAINT */ ++ dwc_write_reg32(&hc_global_regs->haint, haint.d32); ++ ++ /* Clear GINTSTS */ ++ dwc_write_reg32(&global_regs->gintsts, gintsts.d32); ++ ++ /* Read GINTSTS */ ++ gintsts.d32 = dwc_read_reg32(&global_regs->gintsts); ++ //fprintf(stderr, "GINTSTS: %08x\n", gintsts.d32); ++} ++#endif /* DWC_HS_ELECT_TST */ ++ ++/** Handles hub class-specific requests. */ ++int dwc_otg_hcd_hub_control(struct usb_hcd *hcd, ++ u16 typeReq, ++ u16 wValue, ++ u16 wIndex, ++ char *buf, ++ u16 wLength) ++{ ++ int retval = 0; ++ ++ dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd); ++ dwc_otg_core_if_t *core_if = hcd_to_dwc_otg_hcd(hcd)->core_if; ++ struct usb_hub_descriptor *desc; ++ hprt0_data_t hprt0 = {.d32 = 0}; ++ ++ uint32_t port_status; ++ ++ switch (typeReq) { ++ case ClearHubFeature: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearHubFeature 0x%x\n", wValue); ++ switch (wValue) { ++ case C_HUB_LOCAL_POWER: ++ case C_HUB_OVER_CURRENT: ++ /* Nothing required here */ ++ break; ++ default: ++ retval = -EINVAL; ++ DWC_ERROR("DWC OTG HCD - " ++ "ClearHubFeature request %xh unknown\n", wValue); ++ } ++ break; ++ case ClearPortFeature: ++ if (!wIndex || wIndex > 1) ++ goto error; ++ ++ switch (wValue) { ++ case USB_PORT_FEAT_ENABLE: ++ DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_ENABLE\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtena = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case USB_PORT_FEAT_SUSPEND: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_SUSPEND\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtres = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ /* Clear Resume bit */ ++ mdelay(100); ++ hprt0.b.prtres = 0; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case USB_PORT_FEAT_POWER: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_POWER\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 0; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case USB_PORT_FEAT_INDICATOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_INDICATOR\n"); ++ /* Port inidicator not supported */ ++ break; ++ case USB_PORT_FEAT_C_CONNECTION: ++ /* Clears drivers internal connect status change ++ * flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n"); ++ dwc_otg_hcd->flags.b.port_connect_status_change = 0; ++ break; ++ case USB_PORT_FEAT_C_RESET: ++ /* Clears the driver's internal Port Reset Change ++ * flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_RESET\n"); ++ dwc_otg_hcd->flags.b.port_reset_change = 0; ++ break; ++ case USB_PORT_FEAT_C_ENABLE: ++ /* Clears the driver's internal Port ++ * Enable/Disable Change flag */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n"); ++ dwc_otg_hcd->flags.b.port_enable_change = 0; ++ break; ++ case USB_PORT_FEAT_C_SUSPEND: ++ /* Clears the driver's internal Port Suspend ++ * Change flag, which is set when resume signaling on ++ * the host port is complete */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n"); ++ dwc_otg_hcd->flags.b.port_suspend_change = 0; ++ break; ++ case USB_PORT_FEAT_C_OVER_CURRENT: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n"); ++ dwc_otg_hcd->flags.b.port_over_current_change = 0; ++ break; ++ default: ++ retval = -EINVAL; ++ DWC_ERROR("DWC OTG HCD - " ++ "ClearPortFeature request %xh " ++ "unknown or unsupported\n", wValue); ++ } ++ break; ++ case GetHubDescriptor: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetHubDescriptor\n"); ++ desc = (struct usb_hub_descriptor *)buf; ++ desc->bDescLength = 9; ++ desc->bDescriptorType = 0x29; ++ desc->bNbrPorts = 1; ++ desc->wHubCharacteristics = 0x08; ++ desc->bPwrOn2PwrGood = 1; ++ desc->bHubContrCurrent = 0; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,39) ++ desc->u.hs.DeviceRemovable[0] = 0; ++ desc->u.hs.DeviceRemovable[1] = 0xff; ++#endif ++ break; ++ case GetHubStatus: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetHubStatus\n"); ++ memset(buf, 0, 4); ++ break; ++ case GetPortStatus: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "GetPortStatus\n"); ++ ++ if (!wIndex || wIndex > 1) ++ goto error; ++ ++ port_status = 0; ++ ++ if (dwc_otg_hcd->flags.b.port_connect_status_change) ++ port_status |= (1 << USB_PORT_FEAT_C_CONNECTION); ++ ++ if (dwc_otg_hcd->flags.b.port_enable_change) ++ port_status |= (1 << USB_PORT_FEAT_C_ENABLE); ++ ++ if (dwc_otg_hcd->flags.b.port_suspend_change) ++ port_status |= (1 << USB_PORT_FEAT_C_SUSPEND); ++ ++ if (dwc_otg_hcd->flags.b.port_reset_change) ++ port_status |= (1 << USB_PORT_FEAT_C_RESET); ++ ++ if (dwc_otg_hcd->flags.b.port_over_current_change) { ++ DWC_ERROR("Device Not Supported\n"); ++ port_status |= (1 << USB_PORT_FEAT_C_OVER_CURRENT); ++ } ++ ++ if (!dwc_otg_hcd->flags.b.port_connect_status) { ++ /* ++ * The port is disconnected, which means the core is ++ * either in device mode or it soon will be. Just ++ * return 0's for the remainder of the port status ++ * since the port register can't be read if the core ++ * is in device mode. ++ */ ++ *((__le32 *) buf) = cpu_to_le32(port_status); ++ break; ++ } ++ ++ hprt0.d32 = dwc_read_reg32(core_if->host_if->hprt0); ++ DWC_DEBUGPL(DBG_HCDV, " HPRT0: 0x%08x\n", hprt0.d32); ++ ++ if (hprt0.b.prtconnsts) ++ port_status |= (1 << USB_PORT_FEAT_CONNECTION); ++ ++ if (hprt0.b.prtena) ++ port_status |= (1 << USB_PORT_FEAT_ENABLE); ++ ++ if (hprt0.b.prtsusp) ++ port_status |= (1 << USB_PORT_FEAT_SUSPEND); ++ ++ if (hprt0.b.prtovrcurract) ++ port_status |= (1 << USB_PORT_FEAT_OVER_CURRENT); ++ ++ if (hprt0.b.prtrst) ++ port_status |= (1 << USB_PORT_FEAT_RESET); ++ ++ if (hprt0.b.prtpwr) ++ port_status |= (1 << USB_PORT_FEAT_POWER); ++ ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) ++ port_status |= USB_PORT_STAT_HIGH_SPEED; ++ else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED) ++ port_status |= USB_PORT_STAT_LOW_SPEED; ++ ++ if (hprt0.b.prttstctl) ++ port_status |= (1 << USB_PORT_FEAT_TEST); ++ ++ /* USB_PORT_FEAT_INDICATOR unsupported always 0 */ ++ ++ *((__le32 *) buf) = cpu_to_le32(port_status); ++ ++ break; ++ case SetHubFeature: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetHubFeature\n"); ++ /* No HUB features supported */ ++ break; ++ case SetPortFeature: ++ if (wValue != USB_PORT_FEAT_TEST && (!wIndex || wIndex > 1)) ++ goto error; ++ ++ if (!dwc_otg_hcd->flags.b.port_connect_status) { ++ /* ++ * The port is disconnected, which means the core is ++ * either in device mode or it soon will be. Just ++ * return without doing anything since the port ++ * register can't be written if the core is in device ++ * mode. ++ */ ++ break; ++ } ++ ++ switch (wValue) { ++ case USB_PORT_FEAT_SUSPEND: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_SUSPEND\n"); ++ if (hcd->self.otg_port == wIndex && ++ hcd->self.b_hnp_enable) { ++ gotgctl_data_t gotgctl = {.d32=0}; ++ gotgctl.b.hstsethnpen = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gotgctl, ++ 0, gotgctl.d32); ++ core_if->op_state = A_SUSPEND; ++ } ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ //DWC_PRINT("SUSPEND: HPRT0=%0x\n", hprt0.d32); ++ /* Suspend the Phy Clock */ ++ { ++ pcgcctl_data_t pcgcctl = {.d32=0}; ++ pcgcctl.b.stoppclk = 1; ++ dwc_write_reg32(core_if->pcgcctl, pcgcctl.d32); ++ } ++ ++ /* For HNP the bus must be suspended for at least 200ms. */ ++ if (hcd->self.b_hnp_enable) { ++ mdelay(200); ++ //DWC_PRINT("SUSPEND: wait complete! (%d)\n", _hcd->state); ++ } ++ break; ++ case USB_PORT_FEAT_POWER: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_POWER\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtpwr = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ case USB_PORT_FEAT_RESET: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_RESET\n"); ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ /* When B-Host the Port reset bit is set in ++ * the Start HCD Callback function, so that ++ * the reset is started within 1ms of the HNP ++ * success interrupt. */ ++ if (!hcd->self.is_b_host) { ++ hprt0.b.prtrst = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ } ++ /* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */ ++ MDELAY(60); ++ hprt0.b.prtrst = 0; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ break; ++ ++#ifdef DWC_HS_ELECT_TST ++ case USB_PORT_FEAT_TEST: ++ { ++ uint32_t t; ++ gintmsk_data_t gintmsk; ++ ++ t = (wIndex >> 8); /* MSB wIndex USB */ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_TEST %d\n", t); ++ warn("USB_PORT_FEAT_TEST %d\n", t); ++ if (t < 6) { ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prttstctl = t; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ } else { ++ /* Setup global vars with reg addresses (quick and ++ * dirty hack, should be cleaned up) ++ */ ++ global_regs = core_if->core_global_regs; ++ hc_global_regs = core_if->host_if->host_global_regs; ++ hc_regs = (dwc_otg_hc_regs_t *)((char *)global_regs + 0x500); ++ data_fifo = (uint32_t *)((char *)global_regs + 0x1000); ++ ++ if (t == 6) { /* HS_HOST_PORT_SUSPEND_RESUME */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ dwc_write_reg32(&global_regs->gintmsk, 0); ++ ++ /* 15 second delay per the test spec */ ++ mdelay(15000); ++ ++ /* Drive suspend on the root port */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 1; ++ hprt0.b.prtres = 0; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* 15 second delay per the test spec */ ++ mdelay(15000); ++ ++ /* Drive resume on the root port */ ++ hprt0.d32 = dwc_otg_read_hprt0(core_if); ++ hprt0.b.prtsusp = 0; ++ hprt0.b.prtres = 1; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ mdelay(100); ++ ++ /* Clear the resume bit */ ++ hprt0.b.prtres = 0; ++ dwc_write_reg32(core_if->host_if->hprt0, hprt0.d32); ++ ++ /* Restore interrupts */ ++ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); ++ } else if (t == 7) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ dwc_write_reg32(&global_regs->gintmsk, 0); ++ ++ /* 15 second delay per the test spec */ ++ mdelay(15000); ++ ++ /* Send the Setup packet */ ++ do_setup(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ mdelay(15000); ++ ++ /* Restore interrupts */ ++ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); ++ } else if (t == 8) { /* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */ ++ /* Save current interrupt mask */ ++ gintmsk.d32 = dwc_read_reg32(&global_regs->gintmsk); ++ ++ /* Disable all interrupts while we muck with ++ * the hardware directly ++ */ ++ dwc_write_reg32(&global_regs->gintmsk, 0); ++ ++ /* Send the Setup packet */ ++ do_setup(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ mdelay(15000); ++ ++ /* Send the In and Ack packets */ ++ do_in_ack(); ++ ++ /* 15 second delay so nothing else happens for awhile */ ++ mdelay(15000); ++ ++ /* Restore interrupts */ ++ dwc_write_reg32(&global_regs->gintmsk, gintmsk.d32); ++ } ++ } ++ break; ++ } ++#endif /* DWC_HS_ELECT_TST */ ++ ++ case USB_PORT_FEAT_INDICATOR: ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - " ++ "SetPortFeature - USB_PORT_FEAT_INDICATOR\n"); ++ /* Not supported */ ++ break; ++ default: ++ retval = -EINVAL; ++ DWC_ERROR("DWC OTG HCD - " ++ "SetPortFeature request %xh " ++ "unknown or unsupported\n", wValue); ++ break; ++ } ++ break; ++ default: ++ error: ++ retval = -EINVAL; ++ DWC_WARN("DWC OTG HCD - " ++ "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n", ++ typeReq, wIndex, wValue); ++ break; ++ } ++ ++ return retval; ++} ++ ++/** ++ * Assigns transactions from a QTD to a free host channel and initializes the ++ * host channel to perform the transactions. The host channel is removed from ++ * the free list. ++ * ++ * @param hcd The HCD state structure. ++ * @param qh Transactions from the first QTD for this QH are selected and ++ * assigned to a free host channel. ++ */ ++static void assign_and_init_hc(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ dwc_hc_t *hc; ++ dwc_otg_qtd_t *qtd; ++ struct urb *urb; ++ ++ DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p)\n", __func__, hcd, qh); ++ ++ hc = list_entry(hcd->free_hc_list.next, dwc_hc_t, hc_list_entry); ++ ++ /* Remove the host channel from the free list. */ ++ list_del_init(&hc->hc_list_entry); ++ ++ qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); ++ urb = qtd->urb; ++ qh->channel = hc; ++ qh->qtd_in_process = qtd; ++ ++ /* ++ * Use usb_pipedevice to determine device address. This address is ++ * 0 before the SET_ADDRESS command and the correct address afterward. ++ */ ++ hc->dev_addr = usb_pipedevice(urb->pipe); ++ hc->ep_num = usb_pipeendpoint(urb->pipe); ++ ++ if (urb->dev->speed == USB_SPEED_LOW) { ++ hc->speed = DWC_OTG_EP_SPEED_LOW; ++ } else if (urb->dev->speed == USB_SPEED_FULL) { ++ hc->speed = DWC_OTG_EP_SPEED_FULL; ++ } else { ++ hc->speed = DWC_OTG_EP_SPEED_HIGH; ++ } ++ ++ hc->max_packet = dwc_max_packet(qh->maxp); ++ ++ hc->xfer_started = 0; ++ hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS; ++ hc->error_state = (qtd->error_count > 0); ++ hc->halt_on_queue = 0; ++ hc->halt_pending = 0; ++ hc->requests = 0; ++ ++ /* ++ * The following values may be modified in the transfer type section ++ * below. The xfer_len value may be reduced when the transfer is ++ * started to accommodate the max widths of the XferSize and PktCnt ++ * fields in the HCTSIZn register. ++ */ ++ hc->do_ping = qh->ping_state; ++ hc->ep_is_in = (usb_pipein(urb->pipe) != 0); ++ hc->data_pid_start = qh->data_toggle; ++ hc->multi_count = 1; ++ ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *)urb->transfer_dma + urb->actual_length; ++ } else { ++ hc->xfer_buff = (uint8_t *)urb->transfer_buffer + urb->actual_length; ++ } ++ hc->xfer_len = urb->transfer_buffer_length - urb->actual_length; ++ hc->xfer_count = 0; ++ ++ /* ++ * Set the split attributes ++ */ ++ hc->do_split = 0; ++ if (qh->do_split) { ++ hc->do_split = 1; ++ hc->xact_pos = qtd->isoc_split_pos; ++ hc->complete_split = qtd->complete_split; ++ hc->hub_addr = urb->dev->tt->hub->devnum; ++ hc->port_addr = urb->dev->ttport; ++ } ++ ++ switch (usb_pipetype(urb->pipe)) { ++ case PIPE_CONTROL: ++ hc->ep_type = DWC_OTG_EP_TYPE_CONTROL; ++ switch (qtd->control_phase) { ++ case DWC_OTG_CONTROL_SETUP: ++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction\n"); ++ hc->do_ping = 0; ++ hc->ep_is_in = 0; ++ hc->data_pid_start = DWC_OTG_HC_PID_SETUP; ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *)urb->setup_dma; ++ } else { ++ hc->xfer_buff = (uint8_t *)urb->setup_packet; ++ } ++ hc->xfer_len = 8; ++ break; ++ case DWC_OTG_CONTROL_DATA: ++ DWC_DEBUGPL(DBG_HCDV, " Control data transaction\n"); ++ hc->data_pid_start = qtd->data_toggle; ++ break; ++ case DWC_OTG_CONTROL_STATUS: ++ /* ++ * Direction is opposite of data direction or IN if no ++ * data. ++ */ ++ DWC_DEBUGPL(DBG_HCDV, " Control status transaction\n"); ++ if (urb->transfer_buffer_length == 0) { ++ hc->ep_is_in = 1; ++ } else { ++ hc->ep_is_in = (usb_pipein(urb->pipe) != USB_DIR_IN); ++ } ++ if (hc->ep_is_in) { ++ hc->do_ping = 0; ++ } ++ hc->data_pid_start = DWC_OTG_HC_PID_DATA1; ++ hc->xfer_len = 0; ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *)hcd->status_buf_dma; ++ } else { ++ hc->xfer_buff = (uint8_t *)hcd->status_buf; ++ } ++ break; ++ } ++ break; ++ case PIPE_BULK: ++ hc->ep_type = DWC_OTG_EP_TYPE_BULK; ++ break; ++ case PIPE_INTERRUPT: ++ hc->ep_type = DWC_OTG_EP_TYPE_INTR; ++ break; ++ case PIPE_ISOCHRONOUS: ++ { ++ struct usb_iso_packet_descriptor *frame_desc; ++ frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index]; ++ hc->ep_type = DWC_OTG_EP_TYPE_ISOC; ++ if (hcd->core_if->dma_enable) { ++ hc->xfer_buff = (uint8_t *)urb->transfer_dma; ++ } else { ++ hc->xfer_buff = (uint8_t *)urb->transfer_buffer; ++ } ++ hc->xfer_buff += frame_desc->offset + qtd->isoc_split_offset; ++ hc->xfer_len = frame_desc->length - qtd->isoc_split_offset; ++ ++ if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) { ++ if (hc->xfer_len <= 188) { ++ hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ } ++ else { ++ hc->xact_pos = DWC_HCSPLIT_XACTPOS_BEGIN; ++ } ++ } ++ } ++ break; ++ } ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This value may be modified when the transfer is started to ++ * reflect the actual transfer length. ++ */ ++ hc->multi_count = dwc_hb_mult(qh->maxp); ++ } ++ ++ dwc_otg_hc_init(hcd->core_if, hc); ++ hc->qh = qh; ++} ++ ++/** ++ * This function selects transactions from the HCD transfer schedule and ++ * assigns them to available host channels. It is called from HCD interrupt ++ * handler functions. ++ * ++ * @param hcd The HCD state structure. ++ * ++ * @return The types of new transactions that were assigned to host channels. ++ */ ++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd) ++{ ++ struct list_head *qh_ptr; ++ dwc_otg_qh_t *qh; ++ int num_channels; ++ dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE; ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, " Select Transactions\n"); ++#endif ++ ++ /* Process entries in the periodic ready list. */ ++ qh_ptr = hcd->periodic_sched_ready.next; ++ while (qh_ptr != &hcd->periodic_sched_ready && ++ !list_empty(&hcd->free_hc_list)) { ++ ++ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ assign_and_init_hc(hcd, qh); ++ ++ /* ++ * Move the QH from the periodic ready schedule to the ++ * periodic assigned schedule. ++ */ ++ qh_ptr = qh_ptr->next; ++ list_move(&qh->qh_list_entry, &hcd->periodic_sched_assigned); ++ ++ ret_val = DWC_OTG_TRANSACTION_PERIODIC; ++ } ++ ++ /* ++ * Process entries in the inactive portion of the non-periodic ++ * schedule. Some free host channels may not be used if they are ++ * reserved for periodic transfers. ++ */ ++ qh_ptr = hcd->non_periodic_sched_inactive.next; ++ num_channels = hcd->core_if->core_params->host_channels; ++ while (qh_ptr != &hcd->non_periodic_sched_inactive && ++ (hcd->non_periodic_channels < ++ num_channels - hcd->periodic_channels) && ++ !list_empty(&hcd->free_hc_list)) { ++ ++ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ assign_and_init_hc(hcd, qh); ++ ++ /* ++ * Move the QH from the non-periodic inactive schedule to the ++ * non-periodic active schedule. ++ */ ++ qh_ptr = qh_ptr->next; ++ list_move(&qh->qh_list_entry, &hcd->non_periodic_sched_active); ++ ++ if (ret_val == DWC_OTG_TRANSACTION_NONE) { ++ ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC; ++ } else { ++ ret_val = DWC_OTG_TRANSACTION_ALL; ++ } ++ ++ hcd->non_periodic_channels++; ++ } ++ ++ return ret_val; ++} ++ ++/** ++ * Attempts to queue a single transaction request for a host channel ++ * associated with either a periodic or non-periodic transfer. This function ++ * assumes that there is space available in the appropriate request queue. For ++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space ++ * is available in the appropriate Tx FIFO. ++ * ++ * @param hcd The HCD state structure. ++ * @param hc Host channel descriptor associated with either a periodic or ++ * non-periodic transfer. ++ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx ++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic ++ * transfers. ++ * ++ * @return 1 if a request is queued and more requests may be needed to ++ * complete the transfer, 0 if no more requests are required for this ++ * transfer, -1 if there is insufficient space in the Tx FIFO. ++ */ ++static int queue_transaction(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ uint16_t fifo_dwords_avail) ++{ ++ int retval; ++ ++ if (hcd->core_if->dma_enable) { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ hc->qh->ping_state = 0; ++ } ++ retval = 0; ++ } else if (hc->halt_pending) { ++ /* Don't queue a request if the channel has been halted. */ ++ retval = 0; ++ } else if (hc->halt_on_queue) { ++ dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status); ++ retval = 0; ++ } else if (hc->do_ping) { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ } ++ retval = 0; ++ } else if (!hc->ep_is_in || ++ hc->data_pid_start == DWC_OTG_HC_PID_SETUP) { ++ if ((fifo_dwords_avail * 4) >= hc->max_packet) { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ retval = 1; ++ } else { ++ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc); ++ } ++ } else { ++ retval = -1; ++ } ++ } else { ++ if (!hc->xfer_started) { ++ dwc_otg_hc_start_transfer(hcd->core_if, hc); ++ retval = 1; ++ } else { ++ retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc); ++ } ++ } ++ ++ return retval; ++} ++ ++/** ++ * Processes active non-periodic channels and queues transactions for these ++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx ++ * FIFO Empty interrupt is enabled if there are more transactions to queue as ++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx ++ * FIFO Empty interrupt is disabled. ++ */ ++static void process_non_periodic_channels(dwc_otg_hcd_t *hcd) ++{ ++ gnptxsts_data_t tx_status; ++ struct list_head *orig_qh_ptr; ++ dwc_otg_qh_t *qh; ++ int status; ++ int no_queue_space = 0; ++ int no_fifo_space = 0; ++ int more_to_do = 0; ++ ++ dwc_otg_core_global_regs_t *global_regs = hcd->core_if->core_global_regs; ++ ++ DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n"); ++#ifdef DEBUG ++ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (before queue): %d\n", ++ tx_status.b.nptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (before queue): %d\n", ++ tx_status.b.nptxfspcavail); ++#endif ++ /* ++ * Keep track of the starting point. Skip over the start-of-list ++ * entry. ++ */ ++ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { ++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; ++ } ++ orig_qh_ptr = hcd->non_periodic_qh_ptr; ++ ++ /* ++ * Process once through the active list or until no more space is ++ * available in the request queue or the Tx FIFO. ++ */ ++ do { ++ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); ++ if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) { ++ no_queue_space = 1; ++ break; ++ } ++ ++ qh = list_entry(hcd->non_periodic_qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ status = queue_transaction(hcd, qh->channel, tx_status.b.nptxfspcavail); ++ ++ if (status > 0) { ++ more_to_do = 1; ++ } else if (status < 0) { ++ no_fifo_space = 1; ++ break; ++ } ++ ++ /* Advance to next QH, skipping start-of-list entry. */ ++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; ++ if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) { ++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; ++ } ++ ++ } while (hcd->non_periodic_qh_ptr != orig_qh_ptr); ++ ++ if (!hcd->core_if->dma_enable) { ++ gintmsk_data_t intr_mask = {.d32 = 0}; ++ intr_mask.b.nptxfempty = 1; ++ ++#ifdef DEBUG ++ tx_status.d32 = dwc_read_reg32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_HCDV, " NP Tx Req Queue Space Avail (after queue): %d\n", ++ tx_status.b.nptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, " NP Tx FIFO Space Avail (after queue): %d\n", ++ tx_status.b.nptxfspcavail); ++#endif ++ if (more_to_do || no_queue_space || no_fifo_space) { ++ /* ++ * May need to queue more transactions as the request ++ * queue or Tx FIFO empties. Enable the non-periodic ++ * Tx FIFO empty interrupt. (Always use the half-empty ++ * level to ensure that new requests are loaded as ++ * soon as possible.) ++ */ ++ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32); ++ } else { ++ /* ++ * Disable the Tx FIFO empty interrupt since there are ++ * no more transactions that need to be queued right ++ * now. This function is called from interrupt ++ * handlers to queue more transactions as transfer ++ * states change. ++ */ ++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); ++ } ++ } ++} ++ ++/** ++ * Processes periodic channels for the next frame and queues transactions for ++ * these channels to the DWC_otg controller. After queueing transactions, the ++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions ++ * to queue as Periodic Tx FIFO or request queue space becomes available. ++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled. ++ */ ++static void process_periodic_channels(dwc_otg_hcd_t *hcd) ++{ ++ hptxsts_data_t tx_status; ++ struct list_head *qh_ptr; ++ dwc_otg_qh_t *qh; ++ int status; ++ int no_queue_space = 0; ++ int no_fifo_space = 0; ++ ++ dwc_otg_host_global_regs_t *host_regs; ++ host_regs = hcd->core_if->host_if->host_global_regs; ++ ++ DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n"); ++#ifdef DEBUG ++ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); ++ DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (before queue): %d\n", ++ tx_status.b.ptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (before queue): %d\n", ++ tx_status.b.ptxfspcavail); ++#endif ++ ++ qh_ptr = hcd->periodic_sched_assigned.next; ++ while (qh_ptr != &hcd->periodic_sched_assigned) { ++ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); ++ if (tx_status.b.ptxqspcavail == 0) { ++ no_queue_space = 1; ++ break; ++ } ++ ++ qh = list_entry(qh_ptr, dwc_otg_qh_t, qh_list_entry); ++ ++ /* ++ * Set a flag if we're queuing high-bandwidth in slave mode. ++ * The flag prevents any halts to get into the request queue in ++ * the middle of multiple high-bandwidth packets getting queued. ++ */ ++ if (!hcd->core_if->dma_enable && ++ qh->channel->multi_count > 1) ++ { ++ hcd->core_if->queuing_high_bandwidth = 1; ++ } ++ ++ status = queue_transaction(hcd, qh->channel, tx_status.b.ptxfspcavail); ++ if (status < 0) { ++ no_fifo_space = 1; ++ break; ++ } ++ ++ /* ++ * In Slave mode, stay on the current transfer until there is ++ * nothing more to do or the high-bandwidth request count is ++ * reached. In DMA mode, only need to queue one request. The ++ * controller automatically handles multiple packets for ++ * high-bandwidth transfers. ++ */ ++ if (hcd->core_if->dma_enable || status == 0 || ++ qh->channel->requests == qh->channel->multi_count) { ++ qh_ptr = qh_ptr->next; ++ /* ++ * Move the QH from the periodic assigned schedule to ++ * the periodic queued schedule. ++ */ ++ list_move(&qh->qh_list_entry, &hcd->periodic_sched_queued); ++ ++ /* done queuing high bandwidth */ ++ hcd->core_if->queuing_high_bandwidth = 0; ++ } ++ } ++ ++ if (!hcd->core_if->dma_enable) { ++ dwc_otg_core_global_regs_t *global_regs; ++ gintmsk_data_t intr_mask = {.d32 = 0}; ++ ++ global_regs = hcd->core_if->core_global_regs; ++ intr_mask.b.ptxfempty = 1; ++#ifdef DEBUG ++ tx_status.d32 = dwc_read_reg32(&host_regs->hptxsts); ++ DWC_DEBUGPL(DBG_HCDV, " P Tx Req Queue Space Avail (after queue): %d\n", ++ tx_status.b.ptxqspcavail); ++ DWC_DEBUGPL(DBG_HCDV, " P Tx FIFO Space Avail (after queue): %d\n", ++ tx_status.b.ptxfspcavail); ++#endif ++ if (!list_empty(&hcd->periodic_sched_assigned) || ++ no_queue_space || no_fifo_space) { ++ /* ++ * May need to queue more transactions as the request ++ * queue or Tx FIFO empties. Enable the periodic Tx ++ * FIFO empty interrupt. (Always use the half-empty ++ * level to ensure that new requests are loaded as ++ * soon as possible.) ++ */ ++ dwc_modify_reg32(&global_regs->gintmsk, 0, intr_mask.d32); ++ } else { ++ /* ++ * Disable the Tx FIFO empty interrupt since there are ++ * no more transactions that need to be queued right ++ * now. This function is called from interrupt ++ * handlers to queue more transactions as transfer ++ * states change. ++ */ ++ dwc_modify_reg32(&global_regs->gintmsk, intr_mask.d32, 0); ++ } ++ } ++} ++ ++/** ++ * This function processes the currently active host channels and queues ++ * transactions for these channels to the DWC_otg controller. It is called ++ * from HCD interrupt handler functions. ++ * ++ * @param hcd The HCD state structure. ++ * @param tr_type The type(s) of transactions to queue (non-periodic, ++ * periodic, or both). ++ */ ++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd, ++ dwc_otg_transaction_type_e tr_type) ++{ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n"); ++#endif ++ /* Process host channels associated with periodic transfers. */ ++ if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC || ++ tr_type == DWC_OTG_TRANSACTION_ALL) && ++ !list_empty(&hcd->periodic_sched_assigned)) { ++ ++ process_periodic_channels(hcd); ++ } ++ ++ /* Process host channels associated with non-periodic transfers. */ ++ if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC || ++ tr_type == DWC_OTG_TRANSACTION_ALL) { ++ if (!list_empty(&hcd->non_periodic_sched_active)) { ++ process_non_periodic_channels(hcd); ++ } else { ++ /* ++ * Ensure NP Tx FIFO empty interrupt is disabled when ++ * there are no non-periodic transfers to process. ++ */ ++ gintmsk_data_t gintmsk = {.d32 = 0}; ++ gintmsk.b.nptxfempty = 1; ++ dwc_modify_reg32(&hcd->core_if->core_global_regs->gintmsk, ++ gintmsk.d32, 0); ++ } ++ } ++} ++ ++/** ++ * Sets the final status of an URB and returns it to the device driver. Any ++ * required cleanup of the URB is performed. ++ */ ++void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *hcd, struct urb *urb, int status) ++{ ++#ifdef DEBUG ++ if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) { ++ DWC_PRINT("%s: urb %p, device %d, ep %d %s, status=%d\n", ++ __func__, urb, usb_pipedevice(urb->pipe), ++ usb_pipeendpoint(urb->pipe), ++ usb_pipein(urb->pipe) ? "IN" : "OUT", status); ++ if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) { ++ int i; ++ for (i = 0; i < urb->number_of_packets; i++) { ++ DWC_PRINT(" ISO Desc %d status: %d\n", ++ i, urb->iso_frame_desc[i].status); ++ } ++ } ++ } ++#endif ++ ++ urb->status = status; ++ urb->hcpriv = NULL; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status); ++#else ++ usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, NULL); ++#endif ++} ++ ++/* ++ * Returns the Queue Head for an URB. ++ */ ++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb) ++{ ++ struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb); ++ return (dwc_otg_qh_t *)ep->hcpriv; ++} ++ ++#ifdef DEBUG ++void dwc_print_setup_data(uint8_t *setup) ++{ ++ int i; ++ if (CHK_DEBUG_LEVEL(DBG_HCD)){ ++ DWC_PRINT("Setup Data = MSB "); ++ for (i = 7; i >= 0; i--) DWC_PRINT("%02x ", setup[i]); ++ DWC_PRINT("\n"); ++ DWC_PRINT(" bmRequestType Tranfer = %s\n", (setup[0] & 0x80) ? "Device-to-Host" : "Host-to-Device"); ++ DWC_PRINT(" bmRequestType Type = "); ++ switch ((setup[0] & 0x60) >> 5) { ++ case 0: DWC_PRINT("Standard\n"); break; ++ case 1: DWC_PRINT("Class\n"); break; ++ case 2: DWC_PRINT("Vendor\n"); break; ++ case 3: DWC_PRINT("Reserved\n"); break; ++ } ++ DWC_PRINT(" bmRequestType Recipient = "); ++ switch (setup[0] & 0x1f) { ++ case 0: DWC_PRINT("Device\n"); break; ++ case 1: DWC_PRINT("Interface\n"); break; ++ case 2: DWC_PRINT("Endpoint\n"); break; ++ case 3: DWC_PRINT("Other\n"); break; ++ default: DWC_PRINT("Reserved\n"); break; ++ } ++ DWC_PRINT(" bRequest = 0x%0x\n", setup[1]); ++ DWC_PRINT(" wValue = 0x%0x\n", *((uint16_t *)&setup[2])); ++ DWC_PRINT(" wIndex = 0x%0x\n", *((uint16_t *)&setup[4])); ++ DWC_PRINT(" wLength = 0x%0x\n\n", *((uint16_t *)&setup[6])); ++ } ++} ++#endif ++ ++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd) { ++#if defined(DEBUG) && LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ DWC_PRINT("Frame remaining at SOF:\n"); ++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n", ++ hcd->frrem_samples, hcd->frrem_accum, ++ (hcd->frrem_samples > 0) ? ++ hcd->frrem_accum/hcd->frrem_samples : 0); ++ ++ DWC_PRINT("\n"); ++ DWC_PRINT("Frame remaining at start_transfer (uframe 7):\n"); ++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_7_samples, hcd->core_if->hfnum_7_frrem_accum, ++ (hcd->core_if->hfnum_7_samples > 0) ? ++ hcd->core_if->hfnum_7_frrem_accum/hcd->core_if->hfnum_7_samples : 0); ++ DWC_PRINT("Frame remaining at start_transfer (uframe 0):\n"); ++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_0_samples, hcd->core_if->hfnum_0_frrem_accum, ++ (hcd->core_if->hfnum_0_samples > 0) ? ++ hcd->core_if->hfnum_0_frrem_accum/hcd->core_if->hfnum_0_samples : 0); ++ DWC_PRINT("Frame remaining at start_transfer (uframe 1-6):\n"); ++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n", ++ hcd->core_if->hfnum_other_samples, hcd->core_if->hfnum_other_frrem_accum, ++ (hcd->core_if->hfnum_other_samples > 0) ? ++ hcd->core_if->hfnum_other_frrem_accum/hcd->core_if->hfnum_other_samples : 0); ++ ++ DWC_PRINT("\n"); ++ DWC_PRINT("Frame remaining at sample point A (uframe 7):\n"); ++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a, ++ (hcd->hfnum_7_samples_a > 0) ? ++ hcd->hfnum_7_frrem_accum_a/hcd->hfnum_7_samples_a : 0); ++ DWC_PRINT("Frame remaining at sample point A (uframe 0):\n"); ++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a, ++ (hcd->hfnum_0_samples_a > 0) ? ++ hcd->hfnum_0_frrem_accum_a/hcd->hfnum_0_samples_a : 0); ++ DWC_PRINT("Frame remaining at sample point A (uframe 1-6):\n"); ++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a, ++ (hcd->hfnum_other_samples_a > 0) ? ++ hcd->hfnum_other_frrem_accum_a/hcd->hfnum_other_samples_a : 0); ++ ++ DWC_PRINT("\n"); ++ DWC_PRINT("Frame remaining at sample point B (uframe 7):\n"); ++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b, ++ (hcd->hfnum_7_samples_b > 0) ? ++ hcd->hfnum_7_frrem_accum_b/hcd->hfnum_7_samples_b : 0); ++ DWC_PRINT("Frame remaining at sample point B (uframe 0):\n"); ++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b, ++ (hcd->hfnum_0_samples_b > 0) ? ++ hcd->hfnum_0_frrem_accum_b/hcd->hfnum_0_samples_b : 0); ++ DWC_PRINT("Frame remaining at sample point B (uframe 1-6):\n"); ++ DWC_PRINT(" samples %u, accum %llu, avg %llu\n", ++ hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b, ++ (hcd->hfnum_other_samples_b > 0) ? ++ hcd->hfnum_other_frrem_accum_b/hcd->hfnum_other_samples_b : 0); ++#endif ++} ++ ++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd) ++{ ++#ifdef DEBUG ++ int num_channels; ++ int i; ++ gnptxsts_data_t np_tx_status; ++ hptxsts_data_t p_tx_status; ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ DWC_PRINT("\n"); ++ DWC_PRINT("************************************************************\n"); ++ DWC_PRINT("HCD State:\n"); ++ DWC_PRINT(" Num channels: %d\n", num_channels); ++ for (i = 0; i < num_channels; i++) { ++ dwc_hc_t *hc = hcd->hc_ptr_array[i]; ++ DWC_PRINT(" Channel %d:\n", i); ++ DWC_PRINT(" dev_addr: %d, ep_num: %d, ep_is_in: %d\n", ++ hc->dev_addr, hc->ep_num, hc->ep_is_in); ++ DWC_PRINT(" speed: %d\n", hc->speed); ++ DWC_PRINT(" ep_type: %d\n", hc->ep_type); ++ DWC_PRINT(" max_packet: %d\n", hc->max_packet); ++ DWC_PRINT(" data_pid_start: %d\n", hc->data_pid_start); ++ DWC_PRINT(" multi_count: %d\n", hc->multi_count); ++ DWC_PRINT(" xfer_started: %d\n", hc->xfer_started); ++ DWC_PRINT(" xfer_buff: %p\n", hc->xfer_buff); ++ DWC_PRINT(" xfer_len: %d\n", hc->xfer_len); ++ DWC_PRINT(" xfer_count: %d\n", hc->xfer_count); ++ DWC_PRINT(" halt_on_queue: %d\n", hc->halt_on_queue); ++ DWC_PRINT(" halt_pending: %d\n", hc->halt_pending); ++ DWC_PRINT(" halt_status: %d\n", hc->halt_status); ++ DWC_PRINT(" do_split: %d\n", hc->do_split); ++ DWC_PRINT(" complete_split: %d\n", hc->complete_split); ++ DWC_PRINT(" hub_addr: %d\n", hc->hub_addr); ++ DWC_PRINT(" port_addr: %d\n", hc->port_addr); ++ DWC_PRINT(" xact_pos: %d\n", hc->xact_pos); ++ DWC_PRINT(" requests: %d\n", hc->requests); ++ DWC_PRINT(" qh: %p\n", hc->qh); ++ if (hc->xfer_started) { ++ hfnum_data_t hfnum; ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum); ++ hcchar.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcchar); ++ hctsiz.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hctsiz); ++ hcint.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcint); ++ hcintmsk.d32 = dwc_read_reg32(&hcd->core_if->host_if->hc_regs[i]->hcintmsk); ++ DWC_PRINT(" hfnum: 0x%08x\n", hfnum.d32); ++ DWC_PRINT(" hcchar: 0x%08x\n", hcchar.d32); ++ DWC_PRINT(" hctsiz: 0x%08x\n", hctsiz.d32); ++ DWC_PRINT(" hcint: 0x%08x\n", hcint.d32); ++ DWC_PRINT(" hcintmsk: 0x%08x\n", hcintmsk.d32); ++ } ++ if (hc->xfer_started && hc->qh && hc->qh->qtd_in_process) { ++ dwc_otg_qtd_t *qtd; ++ struct urb *urb; ++ qtd = hc->qh->qtd_in_process; ++ urb = qtd->urb; ++ DWC_PRINT(" URB Info:\n"); ++ DWC_PRINT(" qtd: %p, urb: %p\n", qtd, urb); ++ if (urb) { ++ DWC_PRINT(" Dev: %d, EP: %d %s\n", ++ usb_pipedevice(urb->pipe), usb_pipeendpoint(urb->pipe), ++ usb_pipein(urb->pipe) ? "IN" : "OUT"); ++ DWC_PRINT(" Max packet size: %d\n", ++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); ++ DWC_PRINT(" transfer_buffer: %p\n", urb->transfer_buffer); ++ DWC_PRINT(" transfer_dma: %p\n", (void *)urb->transfer_dma); ++ DWC_PRINT(" transfer_buffer_length: %d\n", urb->transfer_buffer_length); ++ DWC_PRINT(" actual_length: %d\n", urb->actual_length); ++ } ++ } ++ } ++ DWC_PRINT(" non_periodic_channels: %d\n", hcd->non_periodic_channels); ++ DWC_PRINT(" periodic_channels: %d\n", hcd->periodic_channels); ++ DWC_PRINT(" periodic_usecs: %d\n", hcd->periodic_usecs); ++ np_tx_status.d32 = dwc_read_reg32(&hcd->core_if->core_global_regs->gnptxsts); ++ DWC_PRINT(" NP Tx Req Queue Space Avail: %d\n", np_tx_status.b.nptxqspcavail); ++ DWC_PRINT(" NP Tx FIFO Space Avail: %d\n", np_tx_status.b.nptxfspcavail); ++ p_tx_status.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hptxsts); ++ DWC_PRINT(" P Tx Req Queue Space Avail: %d\n", p_tx_status.b.ptxqspcavail); ++ DWC_PRINT(" P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail); ++ dwc_otg_hcd_dump_frrem(hcd); ++ dwc_otg_dump_global_registers(hcd->core_if); ++ dwc_otg_dump_host_registers(hcd->core_if); ++ DWC_PRINT("************************************************************\n"); ++ DWC_PRINT("\n"); ++#endif ++} ++#endif /* DWC_DEVICE_ONLY */ +diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd.h b/drivers/usb/dwc_otg/dwc_otg_hcd.h +new file mode 100644 +index 0000000..ee41dc9 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_hcd.h +@@ -0,0 +1,668 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $ ++ * $Revision: 1.3 $ ++ * $Date: 2008-12-15 06:51:32 $ ++ * $Change: 1064918 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++#ifndef __DWC_HCD_H__ ++#define __DWC_HCD_H__ ++ ++#include <linux/list.h> ++#include <linux/usb.h> ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,35) ++#include <linux/usb/hcd.h> ++#else ++#include <../drivers/usb/core/hcd.h> ++#endif ++ ++struct dwc_otg_device; ++ ++#include "dwc_otg_cil.h" ++ ++/** ++ * @file ++ * ++ * This file contains the structures, constants, and interfaces for ++ * the Host Contoller Driver (HCD). ++ * ++ * The Host Controller Driver (HCD) is responsible for translating requests ++ * from the USB Driver into the appropriate actions on the DWC_otg controller. ++ * It isolates the USBD from the specifics of the controller by providing an ++ * API to the USBD. ++ */ ++ ++/** ++ * Phases for control transfers. ++ */ ++typedef enum dwc_otg_control_phase { ++ DWC_OTG_CONTROL_SETUP, ++ DWC_OTG_CONTROL_DATA, ++ DWC_OTG_CONTROL_STATUS ++} dwc_otg_control_phase_e; ++ ++/** Transaction types. */ ++typedef enum dwc_otg_transaction_type { ++ DWC_OTG_TRANSACTION_NONE, ++ DWC_OTG_TRANSACTION_PERIODIC, ++ DWC_OTG_TRANSACTION_NON_PERIODIC, ++ DWC_OTG_TRANSACTION_ALL ++} dwc_otg_transaction_type_e; ++ ++/** ++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control, ++ * interrupt, or isochronous transfer. A single QTD is created for each URB ++ * (of one of these types) submitted to the HCD. The transfer associated with ++ * a QTD may require one or multiple transactions. ++ * ++ * A QTD is linked to a Queue Head, which is entered in either the ++ * non-periodic or periodic schedule for execution. When a QTD is chosen for ++ * execution, some or all of its transactions may be executed. After ++ * execution, the state of the QTD is updated. The QTD may be retired if all ++ * its transactions are complete or if an error occurred. Otherwise, it ++ * remains in the schedule so more transactions can be executed later. ++ */ ++typedef struct dwc_otg_qtd { ++ /** ++ * Determines the PID of the next data packet for the data phase of ++ * control transfers. Ignored for other transfer types.<br> ++ * One of the following values: ++ * - DWC_OTG_HC_PID_DATA0 ++ * - DWC_OTG_HC_PID_DATA1 ++ */ ++ uint8_t data_toggle; ++ ++ /** Current phase for control transfers (Setup, Data, or Status). */ ++ dwc_otg_control_phase_e control_phase; ++ ++ /** Keep track of the current split type ++ * for FS/LS endpoints on a HS Hub */ ++ uint8_t complete_split; ++ ++ /** How many bytes transferred during SSPLIT OUT */ ++ uint32_t ssplit_out_xfer_count; ++ ++ /** ++ * Holds the number of bus errors that have occurred for a transaction ++ * within this transfer. ++ */ ++ uint8_t error_count; ++ ++ /** ++ * Index of the next frame descriptor for an isochronous transfer. A ++ * frame descriptor describes the buffer position and length of the ++ * data to be transferred in the next scheduled (micro)frame of an ++ * isochronous transfer. It also holds status for that transaction. ++ * The frame index starts at 0. ++ */ ++ int isoc_frame_index; ++ ++ /** Position of the ISOC split on full/low speed */ ++ uint8_t isoc_split_pos; ++ ++ /** Position of the ISOC split in the buffer for the current frame */ ++ uint16_t isoc_split_offset; ++ ++ /** URB for this transfer */ ++ struct urb *urb; ++ ++ /** This list of QTDs */ ++ struct list_head qtd_list_entry; ++ ++} dwc_otg_qtd_t; ++ ++/** ++ * A Queue Head (QH) holds the static characteristics of an endpoint and ++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may ++ * be entered in either the non-periodic or periodic schedule. ++ */ ++typedef struct dwc_otg_qh { ++ /** ++ * Endpoint type. ++ * One of the following values: ++ * - USB_ENDPOINT_XFER_CONTROL ++ * - USB_ENDPOINT_XFER_ISOC ++ * - USB_ENDPOINT_XFER_BULK ++ * - USB_ENDPOINT_XFER_INT ++ */ ++ uint8_t ep_type; ++ uint8_t ep_is_in; ++ ++ /** wMaxPacketSize Field of Endpoint Descriptor. */ ++ uint16_t maxp; ++ ++ /** ++ * Determines the PID of the next data packet for non-control ++ * transfers. Ignored for control transfers.<br> ++ * One of the following values: ++ * - DWC_OTG_HC_PID_DATA0 ++ * - DWC_OTG_HC_PID_DATA1 ++ */ ++ uint8_t data_toggle; ++ ++ /** Ping state if 1. */ ++ uint8_t ping_state; ++ ++ /** ++ * List of QTDs for this QH. ++ */ ++ struct list_head qtd_list; ++ ++ /** Host channel currently processing transfers for this QH. */ ++ dwc_hc_t *channel; ++ ++ /** QTD currently assigned to a host channel for this QH. */ ++ dwc_otg_qtd_t *qtd_in_process; ++ ++ /** Full/low speed endpoint on high-speed hub requires split. */ ++ uint8_t do_split; ++ ++ /** @name Periodic schedule information */ ++ /** @{ */ ++ ++ /** Bandwidth in microseconds per (micro)frame. */ ++ uint8_t usecs; ++ ++ /** Interval between transfers in (micro)frames. */ ++ uint16_t interval; ++ ++ /** ++ * (micro)frame to initialize a periodic transfer. The transfer ++ * executes in the following (micro)frame. ++ */ ++ uint16_t sched_frame; ++ ++ /** (micro)frame at which last start split was initialized. */ ++ uint16_t start_split_frame; ++ ++ /** @} */ ++ ++ /** Entry for QH in either the periodic or non-periodic schedule. */ ++ struct list_head qh_list_entry; ++ ++ /* For non-dword aligned buffer support */ ++ uint8_t *dw_align_buf; ++ dma_addr_t dw_align_buf_dma; ++} dwc_otg_qh_t; ++ ++/** ++ * This structure holds the state of the HCD, including the non-periodic and ++ * periodic schedules. ++ */ ++typedef struct dwc_otg_hcd { ++ /** The DWC otg device pointer */ ++ struct dwc_otg_device *otg_dev; ++ ++ /** DWC OTG Core Interface Layer */ ++ dwc_otg_core_if_t *core_if; ++ ++ /** Internal DWC HCD Flags */ ++ volatile union dwc_otg_hcd_internal_flags { ++ uint32_t d32; ++ struct { ++ unsigned port_connect_status_change : 1; ++ unsigned port_connect_status : 1; ++ unsigned port_reset_change : 1; ++ unsigned port_enable_change : 1; ++ unsigned port_suspend_change : 1; ++ unsigned port_over_current_change : 1; ++ unsigned reserved : 27; ++ } b; ++ } flags; ++ ++ /** ++ * Inactive items in the non-periodic schedule. This is a list of ++ * Queue Heads. Transfers associated with these Queue Heads are not ++ * currently assigned to a host channel. ++ */ ++ struct list_head non_periodic_sched_inactive; ++ ++ /** ++ * Active items in the non-periodic schedule. This is a list of ++ * Queue Heads. Transfers associated with these Queue Heads are ++ * currently assigned to a host channel. ++ */ ++ struct list_head non_periodic_sched_active; ++ ++ /** ++ * Pointer to the next Queue Head to process in the active ++ * non-periodic schedule. ++ */ ++ struct list_head *non_periodic_qh_ptr; ++ ++ /** ++ * Inactive items in the periodic schedule. This is a list of QHs for ++ * periodic transfers that are _not_ scheduled for the next frame. ++ * Each QH in the list has an interval counter that determines when it ++ * needs to be scheduled for execution. This scheduling mechanism ++ * allows only a simple calculation for periodic bandwidth used (i.e. ++ * must assume that all periodic transfers may need to execute in the ++ * same frame). However, it greatly simplifies scheduling and should ++ * be sufficient for the vast majority of OTG hosts, which need to ++ * connect to a small number of peripherals at one time. ++ * ++ * Items move from this list to periodic_sched_ready when the QH ++ * interval counter is 0 at SOF. ++ */ ++ struct list_head periodic_sched_inactive; ++ ++ /** ++ * List of periodic QHs that are ready for execution in the next ++ * frame, but have not yet been assigned to host channels. ++ * ++ * Items move from this list to periodic_sched_assigned as host ++ * channels become available during the current frame. ++ */ ++ struct list_head periodic_sched_ready; ++ ++ /** ++ * List of periodic QHs to be executed in the next frame that are ++ * assigned to host channels. ++ * ++ * Items move from this list to periodic_sched_queued as the ++ * transactions for the QH are queued to the DWC_otg controller. ++ */ ++ struct list_head periodic_sched_assigned; ++ ++ /** ++ * List of periodic QHs that have been queued for execution. ++ * ++ * Items move from this list to either periodic_sched_inactive or ++ * periodic_sched_ready when the channel associated with the transfer ++ * is released. If the interval for the QH is 1, the item moves to ++ * periodic_sched_ready because it must be rescheduled for the next ++ * frame. Otherwise, the item moves to periodic_sched_inactive. ++ */ ++ struct list_head periodic_sched_queued; ++ ++ /** ++ * Total bandwidth claimed so far for periodic transfers. This value ++ * is in microseconds per (micro)frame. The assumption is that all ++ * periodic transfers may occur in the same (micro)frame. ++ */ ++ uint16_t periodic_usecs; ++ ++ /** ++ * Frame number read from the core at SOF. The value ranges from 0 to ++ * DWC_HFNUM_MAX_FRNUM. ++ */ ++ uint16_t frame_number; ++ ++ /** ++ * Free host channels in the controller. This is a list of ++ * dwc_hc_t items. ++ */ ++ struct list_head free_hc_list; ++ ++ /** ++ * Number of host channels assigned to periodic transfers. Currently ++ * assuming that there is a dedicated host channel for each periodic ++ * transaction and at least one host channel available for ++ * non-periodic transactions. ++ */ ++ int periodic_channels; ++ ++ /** ++ * Number of host channels assigned to non-periodic transfers. ++ */ ++ int non_periodic_channels; ++ ++ /** ++ * Array of pointers to the host channel descriptors. Allows accessing ++ * a host channel descriptor given the host channel number. This is ++ * useful in interrupt handlers. ++ */ ++ dwc_hc_t *hc_ptr_array[MAX_EPS_CHANNELS]; ++ ++ /** ++ * Buffer to use for any data received during the status phase of a ++ * control transfer. Normally no data is transferred during the status ++ * phase. This buffer is used as a bit bucket. ++ */ ++ uint8_t *status_buf; ++ ++ /** ++ * DMA address for status_buf. ++ */ ++ dma_addr_t status_buf_dma; ++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64 ++ ++ /** ++ * Structure to allow starting the HCD in a non-interrupt context ++ * during an OTG role change. ++ */ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ struct work_struct start_work; ++#else ++ struct delayed_work start_work; ++#endif ++ ++ /** ++ * Connection timer. An OTG host must display a message if the device ++ * does not connect. Started when the VBus power is turned on via ++ * sysfs attribute "buspower". ++ */ ++ struct timer_list conn_timer; ++ ++ /* Tasket to do a reset */ ++ struct tasklet_struct *reset_tasklet; ++ ++ /* */ ++ spinlock_t lock; ++ ++#ifdef DEBUG ++ uint32_t frrem_samples; ++ uint64_t frrem_accum; ++ ++ uint32_t hfnum_7_samples_a; ++ uint64_t hfnum_7_frrem_accum_a; ++ uint32_t hfnum_0_samples_a; ++ uint64_t hfnum_0_frrem_accum_a; ++ uint32_t hfnum_other_samples_a; ++ uint64_t hfnum_other_frrem_accum_a; ++ ++ uint32_t hfnum_7_samples_b; ++ uint64_t hfnum_7_frrem_accum_b; ++ uint32_t hfnum_0_samples_b; ++ uint64_t hfnum_0_frrem_accum_b; ++ uint32_t hfnum_other_samples_b; ++ uint64_t hfnum_other_frrem_accum_b; ++#endif ++} dwc_otg_hcd_t; ++ ++/** Gets the dwc_otg_hcd from a struct usb_hcd */ ++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd) ++{ ++ return (dwc_otg_hcd_t *)(hcd->hcd_priv); ++} ++ ++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */ ++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t *dwc_otg_hcd) ++{ ++ return container_of((void *)dwc_otg_hcd, struct usb_hcd, hcd_priv); ++} ++ ++/** @name HCD Create/Destroy Functions */ ++/** @{ */ ++extern int dwc_otg_hcd_init(struct device *dev); ++extern void dwc_otg_hcd_remove(struct device *dev); ++/** @} */ ++ ++/** @name Linux HC Driver API Functions */ ++/** @{ */ ++ ++extern int dwc_otg_hcd_start(struct usb_hcd *hcd); ++extern void dwc_otg_hcd_stop(struct usb_hcd *hcd); ++extern int dwc_otg_hcd_get_frame_number(struct usb_hcd *hcd); ++extern void dwc_otg_hcd_free(struct usb_hcd *hcd); ++extern int dwc_otg_hcd_urb_enqueue(struct usb_hcd *hcd, ++ struct urb *urb, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ int mem_flags ++#else ++ gfp_t mem_flags ++#endif ++ ); ++extern int dwc_otg_hcd_urb_dequeue(struct usb_hcd *hcd, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++#endif ++ struct urb *urb, int status); ++extern void dwc_otg_hcd_endpoint_disable(struct usb_hcd *hcd, ++ struct usb_host_endpoint *ep); ++extern irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ , struct pt_regs *regs ++#endif ++ ); ++extern int dwc_otg_hcd_hub_status_data(struct usb_hcd *hcd, ++ char *buf); ++extern int dwc_otg_hcd_hub_control(struct usb_hcd *hcd, ++ u16 typeReq, ++ u16 wValue, ++ u16 wIndex, ++ char *buf, ++ u16 wLength); ++ ++/** @} */ ++ ++/** @name Transaction Execution Functions */ ++/** @{ */ ++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t *hcd); ++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t *hcd, ++ dwc_otg_transaction_type_e tr_type); ++extern void dwc_otg_hcd_complete_urb(dwc_otg_hcd_t *_hcd, struct urb *urb, ++ int status); ++/** @} */ ++ ++/** @name Interrupt Handler Functions */ ++/** @{ */ ++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t *dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num); ++extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t *dwc_otg_hcd); ++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *dwc_otg_hcd); ++/** @} */ ++ ++ ++/** @name Schedule Queue Functions */ ++/** @{ */ ++ ++/* Implemented in dwc_otg_hcd_queue.c */ ++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t *hcd, struct urb *urb); ++extern void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb); ++extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh); ++extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh); ++extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh); ++extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_csplit); ++ ++/** Remove and free a QH */ ++static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t *hcd, ++ dwc_otg_qh_t *qh) ++{ ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ dwc_otg_hcd_qh_free(hcd, qh); ++} ++ ++/** Allocates memory for a QH structure. ++ * @return Returns the memory allocate or NULL on error. */ ++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(void) ++{ ++ return (dwc_otg_qh_t *) kmalloc(sizeof(dwc_otg_qh_t), GFP_KERNEL); ++} ++ ++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(struct urb *urb); ++extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t *qtd, struct urb *urb); ++extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t *qtd, dwc_otg_hcd_t *dwc_otg_hcd); ++ ++/** Allocates memory for a QTD structure. ++ * @return Returns the memory allocate or NULL on error. */ ++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(void) ++{ ++ return (dwc_otg_qtd_t *) kmalloc(sizeof(dwc_otg_qtd_t), GFP_KERNEL); ++} ++ ++/** Frees the memory for a QTD structure. QTD should already be removed from ++ * list. ++ * @param[in] qtd QTD to free.*/ ++static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t *qtd) ++{ ++ kfree(qtd); ++} ++ ++/** Removes a QTD from list. ++ * @param[in] hcd HCD instance. ++ * @param[in] qtd QTD to remove from list. */ ++static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd) ++{ ++ unsigned long flags; ++ SPIN_LOCK_IRQSAVE(&hcd->lock, flags); ++ list_del(&qtd->qtd_list_entry); ++ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags); ++} ++ ++/** Remove and free a QTD */ ++static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t *hcd, dwc_otg_qtd_t *qtd) ++{ ++ dwc_otg_hcd_qtd_remove(hcd, qtd); ++ dwc_otg_hcd_qtd_free(qtd); ++} ++ ++/** @} */ ++ ++ ++/** @name Internal Functions */ ++/** @{ */ ++dwc_otg_qh_t *dwc_urb_to_qh(struct urb *urb); ++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t *hcd); ++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t *hcd); ++/** @} */ ++ ++/** Gets the usb_host_endpoint associated with an URB. */ ++static inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb) ++{ ++ struct usb_device *dev = urb->dev; ++ int ep_num = usb_pipeendpoint(urb->pipe); ++ ++ if (usb_pipein(urb->pipe)) ++ return dev->ep_in[ep_num]; ++ else ++ return dev->ep_out[ep_num]; ++} ++ ++/** ++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is ++ * qualified with its direction (possible 32 endpoints per device). ++ */ ++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \ ++ ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4) ++ ++/** Gets the QH that contains the list_head */ ++#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry) ++ ++/** Gets the QTD that contains the list_head */ ++#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry) ++ ++/** Check if QH is non-periodic */ ++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == USB_ENDPOINT_XFER_BULK) || \ ++ (_qh_ptr_->ep_type == USB_ENDPOINT_XFER_CONTROL)) ++ ++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */ ++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) ++ ++/** Packet size for any kind of endpoint descriptor */ ++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff) ++ ++/** ++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is ++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the ++ * frame number when the max frame number is reached. ++ */ ++static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2) ++{ ++ return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <= ++ (DWC_HFNUM_MAX_FRNUM >> 1); ++} ++ ++/** ++ * Returns true if _frame1 is greater than _frame2. The comparison is done ++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame ++ * number when the max frame number is reached. ++ */ ++static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2) ++{ ++ return (frame1 != frame2) && ++ (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) < ++ (DWC_HFNUM_MAX_FRNUM >> 1)); ++} ++ ++/** ++ * Increments _frame by the amount specified by _inc. The addition is done ++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value. ++ */ ++static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc) ++{ ++ return (frame + inc) & DWC_HFNUM_MAX_FRNUM; ++} ++ ++static inline uint16_t dwc_full_frame_num(uint16_t frame) ++{ ++ return (frame & DWC_HFNUM_MAX_FRNUM) >> 3; ++} ++ ++static inline uint16_t dwc_micro_frame_num(uint16_t frame) ++{ ++ return frame & 0x7; ++} ++ ++#ifdef DEBUG ++/** ++ * Macro to sample the remaining PHY clocks left in the current frame. This ++ * may be used during debugging to determine the average time it takes to ++ * execute sections of code. There are two possible sample points, "a" and ++ * "b", so the _letter argument must be one of these values. ++ * ++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For ++ * example, "cat /sys/devices/lm0/hcd_frrem". ++ */ ++#define dwc_sample_frrem(_hcd, _qh, _letter) \ ++{ \ ++ hfnum_data_t hfnum; \ ++ dwc_otg_qtd_t *qtd; \ ++ qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \ ++ if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \ ++ hfnum.d32 = dwc_read_reg32(&_hcd->core_if->host_if->host_global_regs->hfnum); \ ++ switch (hfnum.b.frnum & 0x7) { \ ++ case 7: \ ++ _hcd->hfnum_7_samples_##_letter++; \ ++ _hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ case 0: \ ++ _hcd->hfnum_0_samples_##_letter++; \ ++ _hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ default: \ ++ _hcd->hfnum_other_samples_##_letter++; \ ++ _hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \ ++ break; \ ++ } \ ++ } \ ++} ++#else ++#define dwc_sample_frrem(_hcd, _qh, _letter) ++#endif ++#endif ++#endif /* DWC_DEVICE_ONLY */ +diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c +new file mode 100644 +index 0000000..bdf2db9 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_intr.c +@@ -0,0 +1,1873 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $ ++ * $Revision: 1.6.2.1 $ ++ * $Date: 2009-04-22 03:48:22 $ ++ * $Change: 1117667 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++#include <linux/version.h> ++ ++#include "dwc_otg_driver.h" ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++/** @file ++ * This file contains the implementation of the HCD Interrupt handlers. ++ */ ++ ++/** This function handles interrupts for the HCD. */ ++int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t *dwc_otg_hcd) ++{ ++ int retval = 0; ++ ++ dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if; ++ gintsts_data_t gintsts; ++#ifdef DEBUG ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++#endif ++ ++ /* Check if HOST Mode */ ++ if (dwc_otg_is_host_mode(core_if)) { ++ gintsts.d32 = dwc_otg_read_core_intr(core_if); ++ if (!gintsts.d32) { ++ return 0; ++ } ++ ++#ifdef DEBUG ++ /* Don't print debug message in the interrupt handler on SOF */ ++# ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++# endif ++ DWC_DEBUGPL(DBG_HCD, "\n"); ++#endif ++ ++#ifdef DEBUG ++# ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++# endif ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x\n", gintsts.d32); ++#endif ++ if (gintsts.b.usbreset) { ++ DWC_PRINT("Usb Reset In Host Mode\n"); ++ } ++ ++ ++ if (gintsts.b.sofintr) { ++ retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.rxstsqlvl) { ++ retval |= dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.nptxfempty) { ++ retval |= dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.i2cintr) { ++ /** @todo Implement i2cintr handler. */ ++ } ++ if (gintsts.b.portintr) { ++ retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.hcintr) { ++ retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd); ++ } ++ if (gintsts.b.ptxfempty) { ++ retval |= dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd); ++ } ++#ifdef DEBUG ++# ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++# endif ++ { ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Finished Servicing Interrupts\n"); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n", ++ dwc_read_reg32(&global_regs->gintsts)); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n", ++ dwc_read_reg32(&global_regs->gintmsk)); ++ } ++#endif ++ ++#ifdef DEBUG ++# ifndef DEBUG_SOF ++ if (gintsts.d32 != DWC_SOF_INTR_MASK) ++# endif ++ DWC_DEBUGPL(DBG_HCD, "\n"); ++#endif ++ ++ } ++ ++ S3C2410X_CLEAR_EINTPEND(); ++ ++ return retval; ++} ++ ++#ifdef DWC_TRACK_MISSED_SOFS ++#warning Compiling code to track missed SOFs ++#define FRAME_NUM_ARRAY_SIZE 1000 ++/** ++ * This function is for debug only. ++ */ ++static inline void track_missed_sofs(uint16_t curr_frame_number) ++{ ++ static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE]; ++ static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE]; ++ static int frame_num_idx = 0; ++ static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM; ++ static int dumped_frame_num_array = 0; ++ ++ if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) { ++ if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) != curr_frame_number) { ++ frame_num_array[frame_num_idx] = curr_frame_number; ++ last_frame_num_array[frame_num_idx++] = last_frame_num; ++ } ++ } else if (!dumped_frame_num_array) { ++ int i; ++ printk(KERN_EMERG USB_DWC "Frame Last Frame\n"); ++ printk(KERN_EMERG USB_DWC "----- ----------\n"); ++ for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) { ++ printk(KERN_EMERG USB_DWC "0x%04x 0x%04x\n", ++ frame_num_array[i], last_frame_num_array[i]); ++ } ++ dumped_frame_num_array = 1; ++ } ++ last_frame_num = curr_frame_number; ++} ++#endif ++ ++/** ++ * Handles the start-of-frame interrupt in host mode. Non-periodic ++ * transactions may be queued to the DWC_otg controller for the current ++ * (micro)frame. Periodic transactions may be queued to the controller for the ++ * next (micro)frame. ++ */ ++int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t *hcd) ++{ ++ hfnum_data_t hfnum; ++ struct list_head *qh_entry; ++ dwc_otg_qh_t *qh; ++ dwc_otg_transaction_type_e tr_type; ++ gintsts_data_t gintsts = {.d32 = 0}; ++ ++ hfnum.d32 = dwc_read_reg32(&hcd->core_if->host_if->host_global_regs->hfnum); ++ ++#ifdef DEBUG_SOF ++ DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n"); ++#endif ++ hcd->frame_number = hfnum.b.frnum; ++ ++#ifdef DEBUG ++ hcd->frrem_accum += hfnum.b.frrem; ++ hcd->frrem_samples++; ++#endif ++ ++#ifdef DWC_TRACK_MISSED_SOFS ++ track_missed_sofs(hcd->frame_number); ++#endif ++ ++ /* Determine whether any periodic QHs should be executed. */ ++ qh_entry = hcd->periodic_sched_inactive.next; ++ while (qh_entry != &hcd->periodic_sched_inactive) { ++ qh = list_entry(qh_entry, dwc_otg_qh_t, qh_list_entry); ++ qh_entry = qh_entry->next; ++ if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) { ++ /* ++ * Move QH to the ready list to be executed next ++ * (micro)frame. ++ */ ++ list_move(&qh->qh_list_entry, &hcd->periodic_sched_ready); ++ } ++ } ++ ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++ ++ /* Clear interrupt */ ++ gintsts.b.sofintr = 1; ++ dwc_write_reg32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at ++ * least one packet in the Rx FIFO. The packets are moved from the FIFO to ++ * memory if the DWC_otg controller is operating in Slave mode. */ ++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *dwc_otg_hcd) ++{ ++ host_grxsts_data_t grxsts; ++ dwc_hc_t *hc = NULL; ++ ++ DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n"); ++ ++ grxsts.d32 = dwc_read_reg32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp); ++ ++ hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum]; ++ ++ /* Packet Status */ ++ DWC_DEBUGPL(DBG_HCDV, " Ch num = %d\n", grxsts.b.chnum); ++ DWC_DEBUGPL(DBG_HCDV, " Count = %d\n", grxsts.b.bcnt); ++ DWC_DEBUGPL(DBG_HCDV, " DPID = %d, hc.dpid = %d\n", grxsts.b.dpid, hc->data_pid_start); ++ DWC_DEBUGPL(DBG_HCDV, " PStatus = %d\n", grxsts.b.pktsts); ++ ++ switch (grxsts.b.pktsts) { ++ case DWC_GRXSTS_PKTSTS_IN: ++ /* Read the data into the host buffer. */ ++ if (grxsts.b.bcnt > 0) { ++ dwc_otg_read_packet(dwc_otg_hcd->core_if, ++ hc->xfer_buff, ++ grxsts.b.bcnt); ++ ++ /* Update the HC fields for the next packet received. */ ++ hc->xfer_count += grxsts.b.bcnt; ++ hc->xfer_buff += grxsts.b.bcnt; ++ } ++ ++ case DWC_GRXSTS_PKTSTS_IN_XFER_COMP: ++ case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR: ++ case DWC_GRXSTS_PKTSTS_CH_HALTED: ++ /* Handled in interrupt, just ignore data */ ++ break; ++ default: ++ DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n", grxsts.b.pktsts); ++ break; ++ } ++ ++ return 1; ++} ++ ++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More ++ * data packets may be written to the FIFO for OUT transfers. More requests ++ * may be written to the non-periodic request queue for IN transfers. This ++ * interrupt is enabled only in Slave mode. */ ++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n"); ++ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, ++ DWC_OTG_TRANSACTION_NON_PERIODIC); ++ return 1; ++} ++ ++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data ++ * packets may be written to the FIFO for OUT transfers. More requests may be ++ * written to the periodic request queue for IN transfers. This interrupt is ++ * enabled only in Slave mode. */ ++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *dwc_otg_hcd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n"); ++ dwc_otg_hcd_queue_transactions(dwc_otg_hcd, ++ DWC_OTG_TRANSACTION_PERIODIC); ++ return 1; ++} ++ ++/** There are multiple conditions that can cause a port interrupt. This function ++ * determines which interrupt conditions have occurred and handles them ++ * appropriately. */ ++int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t *dwc_otg_hcd) ++{ ++ int retval = 0; ++ hprt0_data_t hprt0; ++ hprt0_data_t hprt0_modify; ++ ++ hprt0.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0); ++ hprt0_modify.d32 = dwc_read_reg32(dwc_otg_hcd->core_if->host_if->hprt0); ++ ++ /* Clear appropriate bits in HPRT0 to clear the interrupt bit in ++ * GINTSTS */ ++ ++ hprt0_modify.b.prtena = 0; ++ hprt0_modify.b.prtconndet = 0; ++ hprt0_modify.b.prtenchng = 0; ++ hprt0_modify.b.prtovrcurrchng = 0; ++ ++ /* Port Connect Detected ++ * Set flag and clear if detected */ ++ if (hprt0.b.prtconndet) { ++ DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x " ++ "Port Connect Detected--\n", hprt0.d32); ++ dwc_otg_hcd->flags.b.port_connect_status_change = 1; ++ dwc_otg_hcd->flags.b.port_connect_status = 1; ++ hprt0_modify.b.prtconndet = 1; ++ ++ /* B-Device has connected, Delete the connection timer. */ ++ del_timer( &dwc_otg_hcd->conn_timer ); ++ ++ /* The Hub driver asserts a reset when it sees port connect ++ * status change flag */ ++ retval |= 1; ++ } ++ ++ /* Port Enable Changed ++ * Clear if detected - Set internal flag if disabled */ ++ if (hprt0.b.prtenchng) { ++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " ++ "Port Enable Changed--\n", hprt0.d32); ++ hprt0_modify.b.prtenchng = 1; ++ if (hprt0.b.prtena == 1) { ++ int do_reset = 0; ++ dwc_otg_core_params_t *params = dwc_otg_hcd->core_if->core_params; ++ dwc_otg_core_global_regs_t *global_regs = dwc_otg_hcd->core_if->core_global_regs; ++ dwc_otg_host_if_t *host_if = dwc_otg_hcd->core_if->host_if; ++ ++ /* Check if we need to adjust the PHY clock speed for ++ * low power and adjust it */ ++ if (params->host_support_fs_ls_low_power) { ++ gusbcfg_data_t usbcfg; ++ ++ usbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED || ++ hprt0.b.prtspd == DWC_HPRT0_PRTSPD_FULL_SPEED) { ++ /* ++ * Low power ++ */ ++ hcfg_data_t hcfg; ++ if (usbcfg.b.phylpwrclksel == 0) { ++ /* Set PHY low power clock select for FS/LS devices */ ++ usbcfg.b.phylpwrclksel = 1; ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ do_reset = 1; ++ } ++ ++ hcfg.d32 = dwc_read_reg32(&host_if->host_global_regs->hcfg); ++ ++ if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED && ++ params->host_ls_low_power_phy_clk == ++ DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ) { ++ /* 6 MHZ */ ++ DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 6 MHz (Low Power)\n"); ++ if (hcfg.b.fslspclksel != DWC_HCFG_6_MHZ) { ++ hcfg.b.fslspclksel = DWC_HCFG_6_MHZ; ++ dwc_write_reg32(&host_if->host_global_regs->hcfg, ++ hcfg.d32); ++ do_reset = 1; ++ } ++ } else { ++ /* 48 MHZ */ ++ DWC_DEBUGPL(DBG_CIL, "FS_PHY programming HCFG to 48 MHz ()\n"); ++ if (hcfg.b.fslspclksel != DWC_HCFG_48_MHZ) { ++ hcfg.b.fslspclksel = DWC_HCFG_48_MHZ; ++ dwc_write_reg32(&host_if->host_global_regs->hcfg, ++ hcfg.d32); ++ do_reset = 1; ++ } ++ } ++ } else { ++ /* ++ * Not low power ++ */ ++ if (usbcfg.b.phylpwrclksel == 1) { ++ usbcfg.b.phylpwrclksel = 0; ++ dwc_write_reg32(&global_regs->gusbcfg, usbcfg.d32); ++ do_reset = 1; ++ } ++ } ++ ++ if (do_reset) { ++ tasklet_schedule(dwc_otg_hcd->reset_tasklet); ++ } ++ } ++ ++ if (!do_reset) { ++ /* Port has been enabled set the reset change flag */ ++ dwc_otg_hcd->flags.b.port_reset_change = 1; ++ } ++ } else { ++ dwc_otg_hcd->flags.b.port_enable_change = 1; ++ } ++ retval |= 1; ++ } ++ ++ /** Overcurrent Change Interrupt */ ++ if (hprt0.b.prtovrcurrchng) { ++ DWC_DEBUGPL(DBG_HCD, " --Port Interrupt HPRT0=0x%08x " ++ "Port Overcurrent Changed--\n", hprt0.d32); ++ dwc_otg_hcd->flags.b.port_over_current_change = 1; ++ hprt0_modify.b.prtovrcurrchng = 1; ++ retval |= 1; ++ } ++ ++ /* Clear Port Interrupts */ ++ dwc_write_reg32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32); ++ ++ return retval; ++} ++ ++/** This interrupt indicates that one or more host channels has a pending ++ * interrupt. There are multiple conditions that can cause each host channel ++ * interrupt. This function determines which conditions have occurred for each ++ * host channel interrupt and handles them appropriately. */ ++int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t *dwc_otg_hcd) ++{ ++ int i; ++ int retval = 0; ++ haint_data_t haint; ++ ++ /* Clear appropriate bits in HCINTn to clear the interrupt bit in ++ * GINTSTS */ ++ ++ haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if); ++ ++ for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) { ++ if (haint.b2.chint & (1 << i)) { ++ retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i); ++ } ++ } ++ ++ return retval; ++} ++ ++/* Macro used to clear one channel interrupt */ ++#define clear_hc_int(_hc_regs_, _intr_) \ ++do { \ ++ hcint_data_t hcint_clear = {.d32 = 0}; \ ++ hcint_clear.b._intr_ = 1; \ ++ dwc_write_reg32(&(_hc_regs_)->hcint, hcint_clear.d32); \ ++} while (0) ++ ++/* ++ * Macro used to disable one channel interrupt. Channel interrupts are ++ * disabled when the channel is halted or released by the interrupt handler. ++ * There is no need to handle further interrupts of that type until the ++ * channel is re-assigned. In fact, subsequent handling may cause crashes ++ * because the channel structures are cleaned up when the channel is released. ++ */ ++#define disable_hc_int(_hc_regs_, _intr_) \ ++do { \ ++ hcintmsk_data_t hcintmsk = {.d32 = 0}; \ ++ hcintmsk.b._intr_ = 1; \ ++ dwc_modify_reg32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \ ++} while (0) ++ ++/** ++ * Gets the actual length of a transfer after the transfer halts. _halt_status ++ * holds the reason for the halt. ++ * ++ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE, ++ * *short_read is set to 1 upon return if less than the requested ++ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon ++ * return. short_read may also be NULL on entry, in which case it remains ++ * unchanged. ++ */ ++static uint32_t get_actual_xfer_length(dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd, ++ dwc_otg_halt_status_e halt_status, ++ int *short_read) ++{ ++ hctsiz_data_t hctsiz; ++ uint32_t length; ++ ++ if (short_read != NULL) { ++ *short_read = 0; ++ } ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ ++ if (halt_status == DWC_OTG_HC_XFER_COMPLETE) { ++ if (hc->ep_is_in) { ++ length = hc->xfer_len - hctsiz.b.xfersize; ++ if (short_read != NULL) { ++ *short_read = (hctsiz.b.xfersize != 0); ++ } ++ } else if (hc->qh->do_split) { ++ length = qtd->ssplit_out_xfer_count; ++ } else { ++ length = hc->xfer_len; ++ } ++ } else { ++ /* ++ * Must use the hctsiz.pktcnt field to determine how much data ++ * has been transferred. This field reflects the number of ++ * packets that have been transferred via the USB. This is ++ * always an integral number of packets if the transfer was ++ * halted before its normal completion. (Can't use the ++ * hctsiz.xfersize field because that reflects the number of ++ * bytes transferred via the AHB, not the USB). ++ */ ++ length = (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet; ++ } ++ ++ return length; ++} ++ ++/** ++ * Updates the state of the URB after a Transfer Complete interrupt on the ++ * host channel. Updates the actual_length field of the URB based on the ++ * number of bytes transferred via the host channel. Sets the URB status ++ * if the data transfer is finished. ++ * ++ * @return 1 if the data transfer specified by the URB is completely finished, ++ * 0 otherwise. ++ */ ++static int update_urb_state_xfer_comp(dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ struct urb *urb, ++ dwc_otg_qtd_t *qtd) ++{ ++ int xfer_done = 0; ++ int short_read = 0; ++ int overflow_read=0; ++ uint32_t len = 0; ++ int max_packet; ++ ++ len = get_actual_xfer_length(hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE, ++ &short_read); ++ ++ /* Data overflow case: by Steven */ ++ if (len > urb->transfer_buffer_length) { ++ len = urb->transfer_buffer_length; ++ overflow_read = 1; ++ } ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (((uint32_t)hc->xfer_buff & 0x3) && len && hc->qh->dw_align_buf && hc->ep_is_in) { ++ memcpy(urb->transfer_buffer + urb->actual_length, hc->qh->dw_align_buf, len); ++ } ++ urb->actual_length +=len; ++ ++ max_packet = usb_maxpacket(urb->dev, urb->pipe, !usb_pipein(urb->pipe)); ++ if((len) && usb_pipebulk(urb->pipe) && ++ (urb->transfer_flags & URB_ZERO_PACKET) && ++ (urb->actual_length == urb->transfer_buffer_length) && ++ (!(urb->transfer_buffer_length % max_packet))) { ++ } else if (short_read || urb->actual_length == urb->transfer_buffer_length) { ++ xfer_done = 1; ++ if (short_read && (urb->transfer_flags & URB_SHORT_NOT_OK)) { ++ urb->status = -EREMOTEIO; ++ } else if (overflow_read) { ++ urb->status = -EOVERFLOW; ++ } else { ++ urb->status = 0; ++ } ++ } ++ ++#ifdef DEBUG ++ { ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", ++ __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hc->xfer_len %d\n", hc->xfer_len); ++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.xfersize %d\n", hctsiz.b.xfersize); ++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", ++ urb->transfer_buffer_length); ++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", urb->actual_length); ++ DWC_DEBUGPL(DBG_HCDV, " short_read %d, xfer_done %d\n", ++ short_read, xfer_done); ++ } ++#endif ++ ++ return xfer_done; ++} ++ ++/* ++ * Save the starting data toggle for the next transfer. The data toggle is ++ * saved in the QH for non-control transfers and it's saved in the QTD for ++ * control transfers. ++ */ ++static void save_data_toggle(dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ ++ if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) { ++ dwc_otg_qh_t *qh = hc->qh; ++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ } else { ++ qh->data_toggle = DWC_OTG_HC_PID_DATA1; ++ } ++ } else { ++ if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) { ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA0; ++ } else { ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; ++ } ++ } ++} ++ ++/** ++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic ++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are ++ * still linked to the QH, the QH is added to the end of the inactive ++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic ++ * schedule if no more QTDs are linked to the QH. ++ */ ++static void deactivate_qh(dwc_otg_hcd_t *hcd, ++ dwc_otg_qh_t *qh, ++ int free_qtd) ++{ ++ int continue_split = 0; ++ dwc_otg_qtd_t *qtd; ++ ++ DWC_DEBUGPL(DBG_HCDV, " %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd); ++ ++ qtd = list_entry(qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); ++ ++ if (qtd->complete_split) { ++ continue_split = 1; ++ } else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID || ++ qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) { ++ continue_split = 1; ++ } ++ ++ if (free_qtd) { ++ dwc_otg_hcd_qtd_remove_and_free(hcd, qtd); ++ continue_split = 0; ++ } ++ ++ qh->channel = NULL; ++ qh->qtd_in_process = NULL; ++ dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split); ++} ++ ++/** ++ * Updates the state of an Isochronous URB when the transfer is stopped for ++ * any reason. The fields of the current entry in the frame descriptor array ++ * are set based on the transfer state and the input _halt_status. Completes ++ * the Isochronous URB if all the URB frames have been completed. ++ * ++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be ++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE. ++ */ ++static dwc_otg_halt_status_e ++update_isoc_urb_state(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ struct urb *urb = qtd->urb; ++ dwc_otg_halt_status_e ret_val = halt_status; ++ struct usb_iso_packet_descriptor *frame_desc; ++ ++ frame_desc = &urb->iso_frame_desc[qtd->isoc_frame_index]; ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_COMPLETE: ++ frame_desc->status = 0; ++ frame_desc->actual_length = ++ get_actual_xfer_length(hc, hc_regs, qtd, ++ halt_status, NULL); ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (frame_desc->actual_length && ((uint32_t)hc->xfer_buff & 0x3) && ++ hc->qh->dw_align_buf && hc->ep_is_in) { ++ memcpy(urb->transfer_buffer + frame_desc->offset + qtd->isoc_split_offset, ++ hc->qh->dw_align_buf, frame_desc->actual_length); ++ ++ } ++ ++ break; ++ case DWC_OTG_HC_XFER_FRAME_OVERRUN: ++ printk("DWC_OTG_HC_XFER_FRAME_OVERRUN: %d\n", halt_status); ++ urb->error_count++; ++ if (hc->ep_is_in) { ++ frame_desc->status = -ENOSR; ++ } else { ++ frame_desc->status = -ECOMM; ++ } ++ frame_desc->actual_length = 0; ++ break; ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ printk("DWC_OTG_HC_XFER_BABBLE_ERR: %d\n", halt_status); ++ urb->error_count++; ++ frame_desc->status = -EOVERFLOW; ++ /* Don't need to update actual_length in this case. */ ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ printk("DWC_OTG_HC_XFER_XACT_ERR: %d\n", halt_status); ++ urb->error_count++; ++ frame_desc->status = -EPROTO; ++ frame_desc->actual_length = ++ get_actual_xfer_length(hc, hc_regs, qtd, ++ halt_status, NULL); ++ ++ /* non DWORD-aligned buffer case handling. */ ++ if (frame_desc->actual_length && ((uint32_t)hc->xfer_buff & 0x3) && ++ hc->qh->dw_align_buf && hc->ep_is_in) { ++ memcpy(urb->transfer_buffer + frame_desc->offset + qtd->isoc_split_offset, ++ hc->qh->dw_align_buf, frame_desc->actual_length); ++ ++ } ++ break; ++ default: ++ ++ DWC_ERROR("%s: Unhandled _halt_status (%d)\n", __func__, ++ halt_status); ++ BUG(); ++ break; ++ } ++ ++ if (++qtd->isoc_frame_index == urb->number_of_packets) { ++ /* ++ * urb->status is not used for isoc transfers. ++ * The individual frame_desc statuses are used instead. ++ */ ++ dwc_otg_hcd_complete_urb(hcd, urb, 0); ++ ret_val = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ ret_val = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ ++ return ret_val; ++} ++ ++/** ++ * Releases a host channel for use by other transfers. Attempts to select and ++ * queue more transactions since at least one host channel is available. ++ * ++ * @param hcd The HCD state structure. ++ * @param hc The host channel to release. ++ * @param qtd The QTD associated with the host channel. This QTD may be freed ++ * if the transfer is complete or an error has occurred. ++ * @param halt_status Reason the channel is being released. This status ++ * determines the actions taken by this function. ++ */ ++static void release_channel(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_qtd_t *qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ dwc_otg_transaction_type_e tr_type; ++ int free_qtd; ++ ++ DWC_DEBUGPL(DBG_HCDV, " %s: channel %d, halt_status %d\n", ++ __func__, hc->hc_num, halt_status); ++ ++ switch (halt_status) { ++ case DWC_OTG_HC_XFER_URB_COMPLETE: ++ free_qtd = 1; ++ break; ++ case DWC_OTG_HC_XFER_AHB_ERR: ++ case DWC_OTG_HC_XFER_STALL: ++ case DWC_OTG_HC_XFER_BABBLE_ERR: ++ free_qtd = 1; ++ break; ++ case DWC_OTG_HC_XFER_XACT_ERR: ++ if (qtd->error_count >= 3) { ++ DWC_DEBUGPL(DBG_HCDV, " Complete URB with transaction error\n"); ++ free_qtd = 1; ++ qtd->urb->status = -EPROTO; ++ dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EPROTO); ++ } else { ++ free_qtd = 0; ++ } ++ break; ++ case DWC_OTG_HC_XFER_URB_DEQUEUE: ++ /* ++ * The QTD has already been removed and the QH has been ++ * deactivated. Don't want to do anything except release the ++ * host channel and try to queue more transfers. ++ */ ++ goto cleanup; ++ case DWC_OTG_HC_XFER_NO_HALT_STATUS: ++ DWC_ERROR("%s: No halt_status, channel %d\n", __func__, hc->hc_num); ++ free_qtd = 0; ++ break; ++ default: ++ free_qtd = 0; ++ break; ++ } ++ ++ deactivate_qh(hcd, hc->qh, free_qtd); ++ ++ cleanup: ++ /* ++ * Release the host channel for use by other transfers. The cleanup ++ * function clears the channel interrupt enables and conditions, so ++ * there's no need to clear the Channel Halted interrupt separately. ++ */ ++ dwc_otg_hc_cleanup(hcd->core_if, hc); ++ list_add_tail(&hc->hc_list_entry, &hcd->free_hc_list); ++ ++ switch (hc->ep_type) { ++ case DWC_OTG_EP_TYPE_CONTROL: ++ case DWC_OTG_EP_TYPE_BULK: ++ hcd->non_periodic_channels--; ++ break; ++ ++ default: ++ /* ++ * Don't release reservations for periodic channels here. ++ * That's done when a periodic transfer is descheduled (i.e. ++ * when the QH is removed from the periodic schedule). ++ */ ++ break; ++ } ++ ++ /* Try to queue more transfers now that there's a free channel. */ ++ tr_type = dwc_otg_hcd_select_transactions(hcd); ++ if (tr_type != DWC_OTG_TRANSACTION_NONE) { ++ dwc_otg_hcd_queue_transactions(hcd, tr_type); ++ } ++} ++ ++/** ++ * Halts a host channel. If the channel cannot be halted immediately because ++ * the request queue is full, this function ensures that the FIFO empty ++ * interrupt for the appropriate queue is enabled so that the halt request can ++ * be queued when there is space in the request queue. ++ * ++ * This function may also be called in DMA mode. In that case, the channel is ++ * simply released since the core always halts the channel automatically in ++ * DMA mode. ++ */ ++static void halt_channel(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_qtd_t *qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ if (hcd->core_if->dma_enable) { ++ release_channel(hcd, hc, qtd, halt_status); ++ return; ++ } ++ ++ /* Slave mode processing... */ ++ dwc_otg_hc_halt(hcd->core_if, hc, halt_status); ++ ++ if (hc->halt_on_queue) { ++ gintmsk_data_t gintmsk = {.d32 = 0}; ++ dwc_otg_core_global_regs_t *global_regs; ++ global_regs = hcd->core_if->core_global_regs; ++ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK) { ++ /* ++ * Make sure the Non-periodic Tx FIFO empty interrupt ++ * is enabled so that the non-periodic schedule will ++ * be processed. ++ */ ++ gintmsk.b.nptxfempty = 1; ++ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32); ++ } else { ++ /* ++ * Move the QH from the periodic queued schedule to ++ * the periodic assigned schedule. This allows the ++ * halt to be queued when the periodic schedule is ++ * processed. ++ */ ++ list_move(&hc->qh->qh_list_entry, ++ &hcd->periodic_sched_assigned); ++ ++ /* ++ * Make sure the Periodic Tx FIFO Empty interrupt is ++ * enabled so that the periodic schedule will be ++ * processed. ++ */ ++ gintmsk.b.ptxfempty = 1; ++ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmsk.d32); ++ } ++ } ++} ++ ++/** ++ * Performs common cleanup for non-periodic transfers after a Transfer ++ * Complete interrupt. This function should be called after any endpoint type ++ * specific handling is finished to release the host channel. ++ */ ++static void complete_non_periodic_xfer(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ hcint_data_t hcint; ++ ++ qtd->error_count = 0; ++ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ if (hcint.b.nyet) { ++ /* ++ * Got a NYET on the last transaction of the transfer. This ++ * means that the endpoint should be in the PING state at the ++ * beginning of the next transfer. ++ */ ++ hc->qh->ping_state = 1; ++ clear_hc_int(hc_regs, nyet); ++ } ++ ++ /* ++ * Always halt and release the host channel to make it available for ++ * more transfers. There may still be more phases for a control ++ * transfer or more data packets for a bulk transfer at this point, ++ * but the host channel is still halted. A channel will be reassigned ++ * to the transfer when the non-periodic schedule is processed after ++ * the channel is released. This allows transactions to be queued ++ * properly via dwc_otg_hcd_queue_transactions, which also enables the ++ * Tx FIFO Empty interrupt if necessary. ++ */ ++ if (hc->ep_is_in) { ++ /* ++ * IN transfers in Slave mode require an explicit disable to ++ * halt the channel. (In DMA mode, this call simply releases ++ * the channel.) ++ */ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } else { ++ /* ++ * The channel is automatically disabled by the core for OUT ++ * transfers in Slave mode. ++ */ ++ release_channel(hcd, hc, qtd, halt_status); ++ } ++} ++ ++/** ++ * Performs common cleanup for periodic transfers after a Transfer Complete ++ * interrupt. This function should be called after any endpoint type specific ++ * handling is finished to release the host channel. ++ */ ++static void complete_periodic_xfer(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ hctsiz_data_t hctsiz; ++ qtd->error_count = 0; ++ ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) { ++ /* Core halts channel in these cases. */ ++ release_channel(hcd, hc, qtd, halt_status); ++ } else { ++ /* Flush any outstanding requests from the Tx queue. */ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++} ++ ++/** ++ * Handles a host channel Transfer Complete interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ int urb_xfer_done; ++ dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ struct urb *urb = qtd->urb; ++ int pipe_type = usb_pipetype(urb->pipe); ++ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "Transfer Complete--\n", hc->hc_num); ++ ++ /* ++ * Handle xfer complete on CSPLIT. ++ */ ++ if (hc->qh->do_split) { ++ qtd->complete_split = 0; ++ } ++ ++ /* Update the QTD and URB states. */ ++ switch (pipe_type) { ++ case PIPE_CONTROL: ++ switch (qtd->control_phase) { ++ case DWC_OTG_CONTROL_SETUP: ++ if (urb->transfer_buffer_length > 0) { ++ qtd->control_phase = DWC_OTG_CONTROL_DATA; ++ } else { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ } ++ DWC_DEBUGPL(DBG_HCDV, " Control setup transaction done\n"); ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ break; ++ case DWC_OTG_CONTROL_DATA: { ++ urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); ++ if (urb_xfer_done) { ++ qtd->control_phase = DWC_OTG_CONTROL_STATUS; ++ DWC_DEBUGPL(DBG_HCDV, " Control data transfer done\n"); ++ } else { ++ save_data_toggle(hc, hc_regs, qtd); ++ } ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ break; ++ } ++ case DWC_OTG_CONTROL_STATUS: ++ DWC_DEBUGPL(DBG_HCDV, " Control transfer complete\n"); ++ if (urb->status == -EINPROGRESS) { ++ urb->status = 0; ++ } ++ dwc_otg_hcd_complete_urb(hcd, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ break; ++ } ++ ++ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case PIPE_BULK: ++ DWC_DEBUGPL(DBG_HCDV, " Bulk transfer complete\n"); ++ urb_xfer_done = update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); ++ if (urb_xfer_done) { ++ dwc_otg_hcd_complete_urb(hcd, urb, urb->status); ++ halt_status = DWC_OTG_HC_XFER_URB_COMPLETE; ++ } else { ++ halt_status = DWC_OTG_HC_XFER_COMPLETE; ++ } ++ ++ save_data_toggle(hc, hc_regs, qtd); ++ complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ case PIPE_INTERRUPT: ++ DWC_DEBUGPL(DBG_HCDV, " Interrupt transfer complete\n"); ++ update_urb_state_xfer_comp(hc, hc_regs, urb, qtd); ++ ++ /* ++ * Interrupt URB is done on the first transfer complete ++ * interrupt. ++ */ ++ dwc_otg_hcd_complete_urb(hcd, urb, urb->status); ++ save_data_toggle(hc, hc_regs, qtd); ++ complete_periodic_xfer(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_URB_COMPLETE); ++ break; ++ case PIPE_ISOCHRONOUS: ++ DWC_DEBUGPL(DBG_HCDV, " Isochronous transfer complete\n"); ++ if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) { ++ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_COMPLETE); ++ } ++ complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status); ++ break; ++ } ++ ++ disable_hc_int(hc_regs, xfercompl); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel STALL interrupt. This handler may be called in ++ * either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ struct urb *urb = qtd->urb; ++ int pipe_type = usb_pipetype(urb->pipe); ++ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "STALL Received--\n", hc->hc_num); ++ ++ if (pipe_type == PIPE_CONTROL) { ++ dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE); ++ } ++ ++ if (pipe_type == PIPE_BULK || pipe_type == PIPE_INTERRUPT) { ++ dwc_otg_hcd_complete_urb(hcd, urb, -EPIPE); ++ /* ++ * USB protocol requires resetting the data toggle for bulk ++ * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT) ++ * setup command is issued to the endpoint. Anticipate the ++ * CLEAR_FEATURE command since a STALL has occurred and reset ++ * the data toggle now. ++ */ ++ hc->qh->data_toggle = 0; ++ } ++ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL); ++ ++ disable_hc_int(hc_regs, stall); ++ ++ return 1; ++} ++ ++/* ++ * Updates the state of the URB when a transfer has been stopped due to an ++ * abnormal condition before the transfer completes. Modifies the ++ * actual_length field of the URB to reflect the number of bytes that have ++ * actually been transferred via the host channel. ++ */ ++static void update_urb_state_xfer_intr(dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ struct urb *urb, ++ dwc_otg_qtd_t *qtd, ++ dwc_otg_halt_status_e halt_status) ++{ ++ uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd, ++ halt_status, NULL); ++ urb->actual_length += bytes_transferred; ++ ++#ifdef DEBUG ++ { ++ hctsiz_data_t hctsiz; ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n", ++ __func__, (hc->ep_is_in ? "IN" : "OUT"), hc->hc_num); ++ DWC_DEBUGPL(DBG_HCDV, " hc->start_pkt_count %d\n", hc->start_pkt_count); ++ DWC_DEBUGPL(DBG_HCDV, " hctsiz.pktcnt %d\n", hctsiz.b.pktcnt); ++ DWC_DEBUGPL(DBG_HCDV, " hc->max_packet %d\n", hc->max_packet); ++ DWC_DEBUGPL(DBG_HCDV, " bytes_transferred %d\n", bytes_transferred); ++ DWC_DEBUGPL(DBG_HCDV, " urb->actual_length %d\n", urb->actual_length); ++ DWC_DEBUGPL(DBG_HCDV, " urb->transfer_buffer_length %d\n", ++ urb->transfer_buffer_length); ++ } ++#endif ++} ++ ++/** ++ * Handles a host channel NAK interrupt. This handler may be called in either ++ * DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "NAK Received--\n", hc->hc_num); ++ ++ /* ++ * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and ++ * interrupt. Re-start the SSPLIT transfer. ++ */ ++ if (hc->do_split) { ++ if (hc->complete_split) { ++ qtd->error_count = 0; ++ } ++ qtd->complete_split = 0; ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ goto handle_nak_done; ++ } ++ ++ switch (usb_pipetype(qtd->urb->pipe)) { ++ case PIPE_CONTROL: ++ case PIPE_BULK: ++ if (hcd->core_if->dma_enable && hc->ep_is_in) { ++ /* ++ * NAK interrupts are enabled on bulk/control IN ++ * transfers in DMA mode for the sole purpose of ++ * resetting the error count after a transaction error ++ * occurs. The core will continue transferring data. ++ */ ++ qtd->error_count = 0; ++ goto handle_nak_done; ++ } ++ ++ /* ++ * NAK interrupts normally occur during OUT transfers in DMA ++ * or Slave mode. For IN transfers, more requests will be ++ * queued as request queue space is available. ++ */ ++ qtd->error_count = 0; ++ ++ if (!hc->qh->ping_state) { ++ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, ++ qtd, DWC_OTG_HC_XFER_NAK); ++ save_data_toggle(hc, hc_regs, qtd); ++ if (qtd->urb->dev->speed == USB_SPEED_HIGH) { ++ hc->qh->ping_state = 1; ++ } ++ } ++ ++ /* ++ * Halt the channel so the transfer can be re-started from ++ * the appropriate point or the PING protocol will ++ * start/continue. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ break; ++ case PIPE_INTERRUPT: ++ qtd->error_count = 0; ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK); ++ break; ++ case PIPE_ISOCHRONOUS: ++ /* Should never get called for isochronous transfers. */ ++ BUG(); ++ break; ++ } ++ ++ handle_nak_done: ++ disable_hc_int(hc_regs, nak); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel ACK interrupt. This interrupt is enabled when ++ * performing the PING protocol in Slave mode, when errors occur during ++ * either Slave mode or DMA mode, and during Start Split transactions. ++ */ ++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "ACK Received--\n", hc->hc_num); ++ ++ if (hc->do_split) { ++ /* ++ * Handle ACK on SSPLIT. ++ * ACK should not occur in CSPLIT. ++ */ ++ if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) { ++ qtd->ssplit_out_xfer_count = hc->xfer_len; ++ } ++ if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) { ++ /* Don't need complete for isochronous out transfers. */ ++ qtd->complete_split = 1; ++ } ++ ++ /* ISOC OUT */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { ++ switch (hc->xact_pos) { ++ case DWC_HCSPLIT_XACTPOS_ALL: ++ break; ++ case DWC_HCSPLIT_XACTPOS_END: ++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ qtd->isoc_split_offset = 0; ++ break; ++ case DWC_HCSPLIT_XACTPOS_BEGIN: ++ case DWC_HCSPLIT_XACTPOS_MID: ++ /* ++ * For BEGIN or MID, calculate the length for ++ * the next microframe to determine the correct ++ * SSPLIT token, either MID or END. ++ */ ++ { ++ struct usb_iso_packet_descriptor *frame_desc; ++ ++ frame_desc = &qtd->urb->iso_frame_desc[qtd->isoc_frame_index]; ++ qtd->isoc_split_offset += 188; ++ ++ if ((frame_desc->length - qtd->isoc_split_offset) <= 188) { ++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_END; ++ } else { ++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_MID; ++ } ++ ++ } ++ break; ++ } ++ } else { ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); ++ } ++ } else { ++ qtd->error_count = 0; ++ ++ if (hc->qh->ping_state) { ++ hc->qh->ping_state = 0; ++ /* ++ * Halt the channel so the transfer can be re-started ++ * from the appropriate point. This only happens in ++ * Slave mode. In DMA mode, the ping_state is cleared ++ * when the transfer is started because the core ++ * automatically executes the PING, then the transfer. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK); ++ } ++ } ++ ++ /* ++ * If the ACK occurred when _not_ in the PING state, let the channel ++ * continue transferring data after clearing the error count. ++ */ ++ ++ disable_hc_int(hc_regs, ack); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel NYET interrupt. This interrupt should only occur on ++ * Bulk and Control OUT endpoints and for complete split transactions. If a ++ * NYET occurs at the same time as a Transfer Complete interrupt, it is ++ * handled in the xfercomp interrupt handler, not here. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "NYET Received--\n", hc->hc_num); ++ ++ /* ++ * NYET on CSPLIT ++ * re-do the CSPLIT immediately on non-periodic ++ */ ++ if (hc->do_split && hc->complete_split) { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ int frnum = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd)); ++ ++ if (dwc_full_frame_num(frnum) != ++ dwc_full_frame_num(hc->qh->sched_frame)) { ++ /* ++ * No longer in the same full speed frame. ++ * Treat this as a transaction error. ++ */ ++#if 0 ++ /** @todo Fix system performance so this can ++ * be treated as an error. Right now complete ++ * splits cannot be scheduled precisely enough ++ * due to other system activity, so this error ++ * occurs regularly in Slave mode. ++ */ ++ qtd->error_count++; ++#endif ++ qtd->complete_split = 0; ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ /** @todo add support for isoc release */ ++ goto handle_nyet_done; ++ } ++ } ++ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); ++ goto handle_nyet_done; ++ } ++ ++ hc->qh->ping_state = 1; ++ qtd->error_count = 0; ++ ++ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd, ++ DWC_OTG_HC_XFER_NYET); ++ save_data_toggle(hc, hc_regs, qtd); ++ ++ /* ++ * Halt the channel and re-start the transfer so the PING ++ * protocol will start. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET); ++ ++handle_nyet_done: ++ disable_hc_int(hc_regs, nyet); ++ return 1; ++} ++ ++/** ++ * Handles a host channel babble interrupt. This handler may be called in ++ * either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "Babble Error--\n", hc->hc_num); ++ if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) { ++ dwc_otg_hcd_complete_urb(hcd, qtd->urb, -EOVERFLOW); ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR); ++ } else { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_BABBLE_ERR); ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ disable_hc_int(hc_regs, bblerr); ++ return 1; ++} ++ ++/** ++ * Handles a host channel AHB error interrupt. This handler is only called in ++ * DMA mode. ++ */ ++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ hcchar_data_t hcchar; ++ hcsplt_data_t hcsplt; ++ hctsiz_data_t hctsiz; ++ uint32_t hcdma; ++ struct urb *urb = qtd->urb; ++ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "AHB Error--\n", hc->hc_num); ++ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ hcdma = dwc_read_reg32(&hc_regs->hcdma); ++ ++ DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num); ++ DWC_ERROR(" hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32); ++ DWC_ERROR(" hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma); ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n"); ++ DWC_ERROR(" Device address: %d\n", usb_pipedevice(urb->pipe)); ++ DWC_ERROR(" Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe), ++ (usb_pipein(urb->pipe) ? "IN" : "OUT")); ++ DWC_ERROR(" Endpoint type: %s\n", ++ ({char *pipetype; ++ switch (usb_pipetype(urb->pipe)) { ++ case PIPE_CONTROL: pipetype = "CONTROL"; break; ++ case PIPE_BULK: pipetype = "BULK"; break; ++ case PIPE_INTERRUPT: pipetype = "INTERRUPT"; break; ++ case PIPE_ISOCHRONOUS: pipetype = "ISOCHRONOUS"; break; ++ default: pipetype = "UNKNOWN"; break; ++ }; pipetype;})); ++ DWC_ERROR(" Speed: %s\n", ++ ({char *speed; ++ switch (urb->dev->speed) { ++ case USB_SPEED_HIGH: speed = "HIGH"; break; ++ case USB_SPEED_FULL: speed = "FULL"; break; ++ case USB_SPEED_LOW: speed = "LOW"; break; ++ default: speed = "UNKNOWN"; break; ++ }; speed;})); ++ DWC_ERROR(" Max packet size: %d\n", ++ usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe))); ++ DWC_ERROR(" Data buffer length: %d\n", urb->transfer_buffer_length); ++ DWC_ERROR(" Transfer buffer: %p, Transfer DMA: %p\n", ++ urb->transfer_buffer, (void *)urb->transfer_dma); ++ DWC_ERROR(" Setup buffer: %p, Setup DMA: %p\n", ++ urb->setup_packet, (void *)urb->setup_dma); ++ DWC_ERROR(" Interval: %d\n", urb->interval); ++ ++ dwc_otg_hcd_complete_urb(hcd, urb, -EIO); ++ ++ /* ++ * Force a channel halt. Don't call halt_channel because that won't ++ * write to the HCCHARn register in DMA mode to force the halt. ++ */ ++ dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR); ++ ++ disable_hc_int(hc_regs, ahberr); ++ return 1; ++} ++ ++/** ++ * Handles a host channel transaction error interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "Transaction Error--\n", hc->hc_num); ++ ++ switch (usb_pipetype(qtd->urb->pipe)) { ++ case PIPE_CONTROL: ++ case PIPE_BULK: ++ qtd->error_count++; ++ if (!hc->qh->ping_state) { ++ update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, ++ qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ save_data_toggle(hc, hc_regs, qtd); ++ if (!hc->ep_is_in && qtd->urb->dev->speed == USB_SPEED_HIGH) { ++ hc->qh->ping_state = 1; ++ } ++ } ++ ++ /* ++ * Halt the channel so the transfer can be re-started from ++ * the appropriate point or the PING protocol will start. ++ */ ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ break; ++ case PIPE_INTERRUPT: ++ qtd->error_count++; ++ if (hc->do_split && hc->complete_split) { ++ qtd->complete_split = 0; ++ } ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR); ++ break; ++ case PIPE_ISOCHRONOUS: ++ { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_XACT_ERR); ++ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ break; ++ } ++ ++ disable_hc_int(hc_regs, xacterr); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel frame overrun interrupt. This handler may be called ++ * in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "Frame Overrun--\n", hc->hc_num); ++ ++ switch (usb_pipetype(qtd->urb->pipe)) { ++ case PIPE_CONTROL: ++ case PIPE_BULK: ++ break; ++ case PIPE_INTERRUPT: ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN); ++ break; ++ case PIPE_ISOCHRONOUS: ++ { ++ dwc_otg_halt_status_e halt_status; ++ halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd, ++ DWC_OTG_HC_XFER_FRAME_OVERRUN); ++ ++ halt_channel(hcd, hc, qtd, halt_status); ++ } ++ break; ++ } ++ ++ disable_hc_int(hc_regs, frmovrun); ++ ++ return 1; ++} ++ ++/** ++ * Handles a host channel data toggle error interrupt. This handler may be ++ * called in either DMA mode or Slave mode. ++ */ ++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "Data Toggle Error--\n", hc->hc_num); ++ ++ if (hc->ep_is_in) { ++ qtd->error_count = 0; ++ } else { ++ DWC_ERROR("Data Toggle Error on OUT transfer," ++ "channel %d\n", hc->hc_num); ++ } ++ ++ disable_hc_int(hc_regs, datatglerr); ++ ++ return 1; ++} ++ ++#ifdef DEBUG ++/** ++ * This function is for debug only. It checks that a valid halt status is set ++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is ++ * taken and a warning is issued. ++ * @return 1 if halt status is ok, 0 otherwise. ++ */ ++static inline int halt_status_ok(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ hcchar_data_t hcchar; ++ hctsiz_data_t hctsiz; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ hcsplt_data_t hcsplt; ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) { ++ /* ++ * This code is here only as a check. This condition should ++ * never happen. Ignore the halt if it does occur. ++ */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ hctsiz.d32 = dwc_read_reg32(&hc_regs->hctsiz); ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); ++ hcsplt.d32 = dwc_read_reg32(&hc_regs->hcsplt); ++ DWC_WARN("%s: hc->halt_status == DWC_OTG" ++ "channel %d, hcchar 0x%08x, hctsiz 0x%08x, " ++ "hcint 0x%08x, hcintmsk 0x%08x, " ++ "hcsplt 0x%08x, qtd->complete_split %d\n", ++ __func__, hc->hc_num, hcchar.d32, hctsiz.d32, ++ hcint.d32, hcintmsk.d32, ++ hcsplt.d32, qtd->complete_split); ++ ++ DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n", ++ __func__, hc->hc_num); ++ DWC_WARN("\n"); ++ clear_hc_int(hc_regs, chhltd); ++ return 0; ++ } ++ ++ /* ++ * This code is here only as a check. hcchar.chdis should ++ * never be set when the halt interrupt occurs. Halt the ++ * channel again if it does occur. ++ */ ++ hcchar.d32 = dwc_read_reg32(&hc_regs->hcchar); ++ if (hcchar.b.chdis) { ++ DWC_WARN("%s: hcchar.chdis set unexpectedly, " ++ "hcchar 0x%08x, trying to halt again\n", ++ __func__, hcchar.d32); ++ clear_hc_int(hc_regs, chhltd); ++ hc->halt_pending = 0; ++ halt_channel(hcd, hc, qtd, hc->halt_status); ++ return 0; ++ } ++ ++ return 1; ++} ++#endif ++ ++/** ++ * Handles a host Channel Halted interrupt in DMA mode. This handler ++ * determines the reason the channel halted and proceeds accordingly. ++ */ ++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ int out_nak_enh = 0; ++ ++ /* For core with OUT NAK enhancement, the flow for high- ++ * speed CONTROL/BULK OUT is handled a little differently. ++ */ ++ if (hcd->core_if->snpsid >= 0x4F54271A) { ++ if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in && ++ (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL || ++ hc->ep_type == DWC_OTG_EP_TYPE_BULK)) { ++ printk(KERN_DEBUG "OUT NAK enhancement enabled\n"); ++ out_nak_enh = 1; ++ } else { ++ printk(KERN_DEBUG "OUT NAK enhancement disabled, not HS Ctrl/Bulk OUT EP\n"); ++ } ++ } else { ++// printk(KERN_DEBUG "OUT NAK enhancement disabled, no core support\n"); ++ } ++ ++ if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE || ++ hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR) { ++ /* ++ * Just release the channel. A dequeue can happen on a ++ * transfer timeout. In the case of an AHB Error, the channel ++ * was forced to halt because there's no way to gracefully ++ * recover. ++ */ ++ release_channel(hcd, hc, qtd, hc->halt_status); ++ return; ++ } ++ ++ /* Read the HCINTn register to determine the cause for the halt. */ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); ++ ++ if (hcint.b.xfercomp) { ++ /** @todo This is here because of a possible hardware bug. Spec ++ * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT ++ * interrupt w/ACK bit set should occur, but I only see the ++ * XFERCOMP bit, even with it masked out. This is a workaround ++ * for that behavior. Should fix this when hardware is fixed. ++ */ ++ if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) { ++ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); ++ } ++ handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.stall) { ++ handle_hc_stall_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.xacterr) { ++ if (out_nak_enh) { ++ if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) { ++ printk(KERN_DEBUG "XactErr with NYET/NAK/ACK\n"); ++ qtd->error_count = 0; ++ } else { ++ printk(KERN_DEBUG "XactErr without NYET/NAK/ACK\n"); ++ } ++ } ++ ++ /* ++ * Must handle xacterr before nak or ack. Could get a xacterr ++ * at the same time as either of these on a BULK/CONTROL OUT ++ * that started with a PING. The xacterr takes precedence. ++ */ ++ handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd); ++ } else if (!out_nak_enh) { ++ if (hcint.b.nyet) { ++ /* ++ * Must handle nyet before nak or ack. Could get a nyet at the ++ * same time as either of those on a BULK/CONTROL OUT that ++ * started with a PING. The nyet takes precedence. ++ */ ++ handle_hc_nyet_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.bblerr) { ++ handle_hc_babble_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.frmovrun) { ++ handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.nak && !hcintmsk.b.nak) { ++ /* ++ * If nak is not masked, it's because a non-split IN transfer ++ * is in an error state. In that case, the nak is handled by ++ * the nak interrupt handler, not here. Handle nak here for ++ * BULK/CONTROL OUT transfers, which halt on a NAK to allow ++ * rewinding the buffer pointer. ++ */ ++ handle_hc_nak_intr(hcd, hc, hc_regs, qtd); ++ } else if (hcint.b.ack && !hcintmsk.b.ack) { ++ /* ++ * If ack is not masked, it's because a non-split IN transfer ++ * is in an error state. In that case, the ack is handled by ++ * the ack interrupt handler, not here. Handle ack here for ++ * split transfers. Start splits halt on ACK. ++ */ ++ handle_hc_ack_intr(hcd, hc, hc_regs, qtd); ++ } else { ++ if (hc->ep_type == DWC_OTG_EP_TYPE_INTR || ++ hc->ep_type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * A periodic transfer halted with no other channel ++ * interrupts set. Assume it was halted by the core ++ * because it could not be completed in its scheduled ++ * (micro)frame. ++ */ ++#ifdef DEBUG ++ DWC_PRINT("%s: Halt channel %d (assume incomplete periodic transfer)\n", ++ __func__, hc->hc_num); ++#endif ++ halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE); ++ } else { ++ DWC_ERROR("%s: Channel %d, DMA Mode -- ChHltd set, but reason " ++ "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n", ++ __func__, hc->hc_num, hcint.d32, ++ dwc_read_reg32(&hcd->core_if->core_global_regs->gintsts)); ++ } ++ } ++ } else { ++ printk(KERN_DEBUG "NYET/NAK/ACK/other in non-error case, 0x%08x\n", hcint.d32); ++ } ++} ++ ++/** ++ * Handles a host channel Channel Halted interrupt. ++ * ++ * In slave mode, this handler is called only when the driver specifically ++ * requests a halt. This occurs during handling other host channel interrupts ++ * (e.g. nak, xacterr, stall, nyet, etc.). ++ * ++ * In DMA mode, this is the interrupt that occurs when the core has finished ++ * processing a transfer on a channel. Other host channel interrupts (except ++ * ahberr) are disabled in DMA mode. ++ */ ++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t *hcd, ++ dwc_hc_t *hc, ++ dwc_otg_hc_regs_t *hc_regs, ++ dwc_otg_qtd_t *qtd) ++{ ++ DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: " ++ "Channel Halted--\n", hc->hc_num); ++ ++ if (hcd->core_if->dma_enable) { ++ handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd); ++ } else { ++#ifdef DEBUG ++ if (!halt_status_ok(hcd, hc, hc_regs, qtd)) { ++ return 1; ++ } ++#endif ++ release_channel(hcd, hc, qtd, hc->halt_status); ++ } ++ ++ return 1; ++} ++ ++/** Handles interrupt for a specific Host Channel */ ++int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t *dwc_otg_hcd, uint32_t num) ++{ ++ int retval = 0; ++ hcint_data_t hcint; ++ hcintmsk_data_t hcintmsk; ++ dwc_hc_t *hc; ++ dwc_otg_hc_regs_t *hc_regs; ++ dwc_otg_qtd_t *qtd; ++ ++ DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num); ++ ++ hc = dwc_otg_hcd->hc_ptr_array[num]; ++ hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num]; ++ qtd = list_entry(hc->qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); ++ ++ hcint.d32 = dwc_read_reg32(&hc_regs->hcint); ++ hcintmsk.d32 = dwc_read_reg32(&hc_regs->hcintmsk); ++ DWC_DEBUGPL(DBG_HCDV, " hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n", ++ hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32)); ++ hcint.d32 = hcint.d32 & hcintmsk.d32; ++ ++ if (!dwc_otg_hcd->core_if->dma_enable) { ++ if (hcint.b.chhltd && hcint.d32 != 0x2) { ++ hcint.b.chhltd = 0; ++ } ++ } ++ ++ if (hcint.b.xfercomp) { ++ retval |= handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ /* ++ * If NYET occurred at same time as Xfer Complete, the NYET is ++ * handled by the Xfer Complete interrupt handler. Don't want ++ * to call the NYET interrupt handler in this case. ++ */ ++ hcint.b.nyet = 0; ++ } ++ if (hcint.b.chhltd) { ++ retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.ahberr) { ++ retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.stall) { ++ retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.nak) { ++ retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.ack) { ++ retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.nyet) { ++ retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.xacterr) { ++ retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.bblerr) { ++ retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.frmovrun) { ++ retval |= handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ if (hcint.b.datatglerr) { ++ retval |= handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd); ++ } ++ ++ return retval; ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +diff --git a/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c +new file mode 100644 +index 0000000..cfb1f16 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_hcd_queue.c +@@ -0,0 +1,684 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg_ipmate/linux/drivers/dwc_otg_hcd_queue.c $ ++ * $Revision: 1.5 $ ++ * $Date: 2008-12-15 06:51:32 $ ++ * $Change: 537387 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_DEVICE_ONLY ++ ++/** ++ * @file ++ * ++ * This file contains the functions to manage Queue Heads and Queue ++ * Transfer Descriptors. ++ */ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/errno.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/string.h> ++#include <linux/dma-mapping.h> ++ ++#include "dwc_otg_driver.h" ++#include "dwc_otg_hcd.h" ++#include "dwc_otg_regs.h" ++ ++/** ++ * This function allocates and initializes a QH. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param[in] urb Holds the information about the device/endpoint that we need ++ * to initialize the QH. ++ * ++ * @return Returns pointer to the newly allocated QH, or NULL on error. */ ++dwc_otg_qh_t *dwc_otg_hcd_qh_create (dwc_otg_hcd_t *hcd, struct urb *urb) ++{ ++ dwc_otg_qh_t *qh; ++ ++ /* Allocate memory */ ++ /** @todo add memflags argument */ ++ qh = dwc_otg_hcd_qh_alloc (); ++ if (qh == NULL) { ++ return NULL; ++ } ++ ++ dwc_otg_hcd_qh_init (hcd, qh, urb); ++ return qh; ++} ++ ++/** Free each QTD in the QH's QTD-list then free the QH. QH should already be ++ * removed from a list. QTD list should already be empty if called from URB ++ * Dequeue. ++ * ++ * @param[in] hcd HCD instance. ++ * @param[in] qh The QH to free. ++ */ ++void dwc_otg_hcd_qh_free (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ dwc_otg_qtd_t *qtd; ++ struct list_head *pos; ++ unsigned long flags; ++ ++ /* Free each QTD in the QTD list */ ++ SPIN_LOCK_IRQSAVE(&hcd->lock, flags) ++ for (pos = qh->qtd_list.next; ++ pos != &qh->qtd_list; ++ pos = qh->qtd_list.next) ++ { ++ list_del (pos); ++ qtd = dwc_list_to_qtd (pos); ++ dwc_otg_hcd_qtd_free (qtd); ++ } ++ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags) ++ ++ if (qh->dw_align_buf) { ++ dma_free_coherent((dwc_otg_hcd_to_hcd(hcd))->self.controller, ++ hcd->core_if->core_params->max_transfer_size, ++ qh->dw_align_buf, ++ qh->dw_align_buf_dma); ++ } ++ ++ kfree (qh); ++ return; ++} ++ ++/** Initializes a QH structure. ++ * ++ * @param[in] hcd The HCD state structure for the DWC OTG controller. ++ * @param[in] qh The QH to init. ++ * @param[in] urb Holds the information about the device/endpoint that we need ++ * to initialize the QH. */ ++#define SCHEDULE_SLOP 10 ++void dwc_otg_hcd_qh_init(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, struct urb *urb) ++{ ++ char *speed, *type; ++ memset (qh, 0, sizeof (dwc_otg_qh_t)); ++ ++ /* Initialize QH */ ++ switch (usb_pipetype(urb->pipe)) { ++ case PIPE_CONTROL: ++ qh->ep_type = USB_ENDPOINT_XFER_CONTROL; ++ break; ++ case PIPE_BULK: ++ qh->ep_type = USB_ENDPOINT_XFER_BULK; ++ break; ++ case PIPE_ISOCHRONOUS: ++ qh->ep_type = USB_ENDPOINT_XFER_ISOC; ++ break; ++ case PIPE_INTERRUPT: ++ qh->ep_type = USB_ENDPOINT_XFER_INT; ++ break; ++ } ++ ++ qh->ep_is_in = usb_pipein(urb->pipe) ? 1 : 0; ++ ++ qh->data_toggle = DWC_OTG_HC_PID_DATA0; ++ qh->maxp = usb_maxpacket(urb->dev, urb->pipe, !(usb_pipein(urb->pipe))); ++ INIT_LIST_HEAD(&qh->qtd_list); ++ INIT_LIST_HEAD(&qh->qh_list_entry); ++ qh->channel = NULL; ++ ++ /* FS/LS Enpoint on HS Hub ++ * NOT virtual root hub */ ++ qh->do_split = 0; ++ if (((urb->dev->speed == USB_SPEED_LOW) || ++ (urb->dev->speed == USB_SPEED_FULL)) && ++ (urb->dev->tt) && (urb->dev->tt->hub) && (urb->dev->tt->hub->devnum != 1)) ++ { ++ DWC_DEBUGPL(DBG_HCD, "QH init: EP %d: TT found at hub addr %d, for port %d\n", ++ usb_pipeendpoint(urb->pipe), urb->dev->tt->hub->devnum, ++ urb->dev->ttport); ++ qh->do_split = 1; ++ } ++ ++ if (qh->ep_type == USB_ENDPOINT_XFER_INT || ++ qh->ep_type == USB_ENDPOINT_XFER_ISOC) { ++ /* Compute scheduling parameters once and save them. */ ++ hprt0_data_t hprt; ++ ++ /** @todo Account for split transfers in the bus time. */ ++ int bytecount = dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp); ++ ++ /* FIXME: work-around patch by Steven */ ++ qh->usecs = NS_TO_US(usb_calc_bus_time(urb->dev->speed, ++ usb_pipein(urb->pipe), ++ (qh->ep_type == USB_ENDPOINT_XFER_ISOC), ++ bytecount)); ++ ++ /* Start in a slightly future (micro)frame. */ ++ qh->sched_frame = dwc_frame_num_inc(hcd->frame_number, ++ SCHEDULE_SLOP); ++ qh->interval = urb->interval; ++#if 0 ++ /* Increase interrupt polling rate for debugging. */ ++ if (qh->ep_type == USB_ENDPOINT_XFER_INT) { ++ qh->interval = 8; ++ } ++#endif ++ hprt.d32 = dwc_read_reg32(hcd->core_if->host_if->hprt0); ++ if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) && ++ ((urb->dev->speed == USB_SPEED_LOW) || ++ (urb->dev->speed == USB_SPEED_FULL))) { ++ qh->interval *= 8; ++ qh->sched_frame |= 0x7; ++ qh->start_split_frame = qh->sched_frame; ++ } ++ ++ } ++ ++ DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n"); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - qh = %p\n", qh); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Device Address = %d\n", ++ urb->dev->devnum); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Endpoint %d, %s\n", ++ usb_pipeendpoint(urb->pipe), ++ usb_pipein(urb->pipe) == USB_DIR_IN ? "IN" : "OUT"); ++ ++ switch(urb->dev->speed) { ++ case USB_SPEED_LOW: ++ speed = "low"; ++ break; ++ case USB_SPEED_FULL: ++ speed = "full"; ++ break; ++ case USB_SPEED_HIGH: ++ speed = "high"; ++ break; ++ default: ++ speed = "?"; ++ break; ++ } ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Speed = %s\n", speed); ++ ++ switch (qh->ep_type) { ++ case USB_ENDPOINT_XFER_ISOC: ++ type = "isochronous"; ++ break; ++ case USB_ENDPOINT_XFER_INT: ++ type = "interrupt"; ++ break; ++ case USB_ENDPOINT_XFER_CONTROL: ++ type = "control"; ++ break; ++ case USB_ENDPOINT_XFER_BULK: ++ type = "bulk"; ++ break; ++ default: ++ type = "?"; ++ break; ++ } ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - Type = %s\n",type); ++ ++#ifdef DEBUG ++ if (qh->ep_type == USB_ENDPOINT_XFER_INT) { ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n", ++ qh->usecs); ++ DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n", ++ qh->interval); ++ } ++#endif ++ qh->dw_align_buf = NULL; ++ return; ++} ++ ++/** ++ * Checks that a channel is available for a periodic transfer. ++ * ++ * @return 0 if successful, negative error code otherise. ++ */ ++static int periodic_channel_available(dwc_otg_hcd_t *hcd) ++{ ++ /* ++ * Currently assuming that there is a dedicated host channnel for each ++ * periodic transaction plus at least one host channel for ++ * non-periodic transactions. ++ */ ++ int status; ++ int num_channels; ++ ++ num_channels = hcd->core_if->core_params->host_channels; ++ if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels) && ++ (hcd->periodic_channels < num_channels - 1)) { ++ status = 0; ++ } ++ else { ++ DWC_NOTICE("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n", ++ __func__, num_channels, hcd->periodic_channels, ++ hcd->non_periodic_channels); ++ status = -ENOSPC; ++ } ++ ++ return status; ++} ++ ++/** ++ * Checks that there is sufficient bandwidth for the specified QH in the ++ * periodic schedule. For simplicity, this calculation assumes that all the ++ * transfers in the periodic schedule may occur in the same (micro)frame. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH containing periodic bandwidth required. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int check_periodic_bandwidth(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ int status; ++ uint16_t max_claimed_usecs; ++ ++ status = 0; ++ ++ if (hcd->core_if->core_params->speed == DWC_SPEED_PARAM_HIGH) { ++ /* ++ * High speed mode. ++ * Max periodic usecs is 80% x 125 usec = 100 usec. ++ */ ++ max_claimed_usecs = 100 - qh->usecs; ++ } else { ++ /* ++ * Full speed mode. ++ * Max periodic usecs is 90% x 1000 usec = 900 usec. ++ */ ++ max_claimed_usecs = 900 - qh->usecs; ++ } ++ ++ if (hcd->periodic_usecs > max_claimed_usecs) { ++ DWC_NOTICE("%s: already claimed usecs %d, required usecs %d\n", ++ __func__, hcd->periodic_usecs, qh->usecs); ++ status = -ENOSPC; ++ } ++ ++ return status; ++} ++ ++/** ++ * Checks that the max transfer size allowed in a host channel is large enough ++ * to handle the maximum data transfer in a single (micro)frame for a periodic ++ * transfer. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for a periodic endpoint. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int check_max_xfer_size(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ int status; ++ uint32_t max_xfer_size; ++ uint32_t max_channel_xfer_size; ++ ++ status = 0; ++ ++ max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp); ++ max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size; ++ ++ if (max_xfer_size > max_channel_xfer_size) { ++ DWC_NOTICE("%s: Periodic xfer length %d > " ++ "max xfer length for channel %d\n", ++ __func__, max_xfer_size, max_channel_xfer_size); ++ status = -ENOSPC; ++ } ++ ++ return status; ++} ++ ++/** ++ * Schedules an interrupt or isochronous transfer in the periodic schedule. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for the periodic transfer. The QH should already contain the ++ * scheduling information. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++static int schedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ int status = 0; ++ ++ status = periodic_channel_available(hcd); ++ if (status) { ++ DWC_NOTICE("%s: No host channel available for periodic " ++ "transfer.\n", __func__); ++ return status; ++ } ++ ++ status = check_periodic_bandwidth(hcd, qh); ++ if (status) { ++ DWC_NOTICE("%s: Insufficient periodic bandwidth for " ++ "periodic transfer.\n", __func__); ++ return status; ++ } ++ ++ status = check_max_xfer_size(hcd, qh); ++ if (status) { ++ DWC_NOTICE("%s: Channel max transfer size too small " ++ "for periodic transfer.\n", __func__); ++ return status; ++ } ++ ++ /* Always start in the inactive schedule. */ ++ list_add_tail(&qh->qh_list_entry, &hcd->periodic_sched_inactive); ++ ++ /* Reserve the periodic channel. */ ++ hcd->periodic_channels++; ++ ++ /* Update claimed usecs per (micro)frame. */ ++ hcd->periodic_usecs += qh->usecs; ++ ++ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */ ++ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated += qh->usecs / qh->interval; ++ if (qh->ep_type == USB_ENDPOINT_XFER_INT) { ++ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs++; ++ DWC_DEBUGPL(DBG_HCD, "Scheduled intr: qh %p, usecs %d, period %d\n", ++ qh, qh->usecs, qh->interval); ++ } else { ++ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs++; ++ DWC_DEBUGPL(DBG_HCD, "Scheduled isoc: qh %p, usecs %d, period %d\n", ++ qh, qh->usecs, qh->interval); ++ } ++ ++ return status; ++} ++ ++/** ++ * This function adds a QH to either the non periodic or periodic schedule if ++ * it is not already in the schedule. If the QH is already in the schedule, no ++ * action is taken. ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qh_add (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ unsigned long flags; ++ int status = 0; ++ ++ SPIN_LOCK_IRQSAVE(&hcd->lock, flags) ++ ++ if (!list_empty(&qh->qh_list_entry)) { ++ /* QH already in a schedule. */ ++ goto done; ++ } ++ ++ /* Add the new QH to the appropriate schedule */ ++ if (dwc_qh_is_non_per(qh)) { ++ /* Always start in the inactive schedule. */ ++ list_add_tail(&qh->qh_list_entry, &hcd->non_periodic_sched_inactive); ++ } else { ++ status = schedule_periodic(hcd, qh); ++ } ++ ++ done: ++ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags) ++ ++ return status; ++} ++ ++/** ++ * Removes an interrupt or isochronous transfer from the periodic schedule. ++ * ++ * @param hcd The HCD state structure for the DWC OTG controller. ++ * @param qh QH for the periodic transfer. ++ */ ++static void deschedule_periodic(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ list_del_init(&qh->qh_list_entry); ++ ++ /* Release the periodic channel reservation. */ ++ hcd->periodic_channels--; ++ ++ /* Update claimed usecs per (micro)frame. */ ++ hcd->periodic_usecs -= qh->usecs; ++ ++ /* Update average periodic bandwidth claimed and # periodic reqs for usbfs. */ ++ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_allocated -= qh->usecs / qh->interval; ++ ++ if (qh->ep_type == USB_ENDPOINT_XFER_INT) { ++ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_int_reqs--; ++ DWC_DEBUGPL(DBG_HCD, "Descheduled intr: qh %p, usecs %d, period %d\n", ++ qh, qh->usecs, qh->interval); ++ } else { ++ hcd_to_bus(dwc_otg_hcd_to_hcd(hcd))->bandwidth_isoc_reqs--; ++ DWC_DEBUGPL(DBG_HCD, "Descheduled isoc: qh %p, usecs %d, period %d\n", ++ qh, qh->usecs, qh->interval); ++ } ++} ++ ++/** ++ * Removes a QH from either the non-periodic or periodic schedule. Memory is ++ * not freed. ++ * ++ * @param[in] hcd The HCD state structure. ++ * @param[in] qh QH to remove from schedule. */ ++void dwc_otg_hcd_qh_remove (dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh) ++{ ++ unsigned long flags; ++ ++ SPIN_LOCK_IRQSAVE(&hcd->lock, flags); ++ ++ if (list_empty(&qh->qh_list_entry)) { ++ /* QH is not in a schedule. */ ++ goto done; ++ } ++ ++ if (dwc_qh_is_non_per(qh)) { ++ if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) { ++ hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next; ++ } ++ list_del_init(&qh->qh_list_entry); ++ } else { ++ deschedule_periodic(hcd, qh); ++ } ++ ++ done: ++ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags) ++} ++ ++/** ++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active ++ * non-periodic schedule. The QH is added to the inactive non-periodic ++ * schedule if any QTDs are still attached to the QH. ++ * ++ * For periodic QHs, the QH is removed from the periodic queued schedule. If ++ * there are any QTDs still attached to the QH, the QH is added to either the ++ * periodic inactive schedule or the periodic ready schedule and its next ++ * scheduled frame is calculated. The QH is placed in the ready schedule if ++ * the scheduled frame has been reached already. Otherwise it's placed in the ++ * inactive schedule. If there are no QTDs attached to the QH, the QH is ++ * completely removed from the periodic schedule. ++ */ ++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t *hcd, dwc_otg_qh_t *qh, int sched_next_periodic_split) ++{ ++ unsigned long flags; ++ SPIN_LOCK_IRQSAVE(&hcd->lock, flags); ++ ++ if (dwc_qh_is_non_per(qh)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ if (!list_empty(&qh->qtd_list)) { ++ /* Add back to inactive non-periodic schedule. */ ++ dwc_otg_hcd_qh_add(hcd, qh); ++ } ++ } else { ++ uint16_t frame_number = dwc_otg_hcd_get_frame_number(dwc_otg_hcd_to_hcd(hcd)); ++ ++ if (qh->do_split) { ++ /* Schedule the next continuing periodic split transfer */ ++ if (sched_next_periodic_split) { ++ ++ qh->sched_frame = frame_number; ++ if (dwc_frame_num_le(frame_number, ++ dwc_frame_num_inc(qh->start_split_frame, 1))) { ++ /* ++ * Allow one frame to elapse after start ++ * split microframe before scheduling ++ * complete split, but DONT if we are ++ * doing the next start split in the ++ * same frame for an ISOC out. ++ */ ++ if ((qh->ep_type != USB_ENDPOINT_XFER_ISOC) || (qh->ep_is_in != 0)) { ++ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, 1); ++ } ++ } ++ } else { ++ qh->sched_frame = dwc_frame_num_inc(qh->start_split_frame, ++ qh->interval); ++ if (dwc_frame_num_le(qh->sched_frame, frame_number)) { ++ qh->sched_frame = frame_number; ++ } ++ qh->sched_frame |= 0x7; ++ qh->start_split_frame = qh->sched_frame; ++ } ++ } else { ++ qh->sched_frame = dwc_frame_num_inc(qh->sched_frame, qh->interval); ++ if (dwc_frame_num_le(qh->sched_frame, frame_number)) { ++ qh->sched_frame = frame_number; ++ } ++ } ++ ++ if (list_empty(&qh->qtd_list)) { ++ dwc_otg_hcd_qh_remove(hcd, qh); ++ } else { ++ /* ++ * Remove from periodic_sched_queued and move to ++ * appropriate queue. ++ */ ++ if (qh->sched_frame == frame_number) { ++ list_move(&qh->qh_list_entry, ++ &hcd->periodic_sched_ready); ++ } else { ++ list_move(&qh->qh_list_entry, ++ &hcd->periodic_sched_inactive); ++ } ++ } ++ } ++ ++ SPIN_UNLOCK_IRQRESTORE(&hcd->lock, flags); ++} ++ ++/** ++ * This function allocates and initializes a QTD. ++ * ++ * @param[in] urb The URB to create a QTD from. Each URB-QTD pair will end up ++ * pointing to each other so each pair should have a unique correlation. ++ * ++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */ ++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create (struct urb *urb) ++{ ++ dwc_otg_qtd_t *qtd; ++ ++ qtd = dwc_otg_hcd_qtd_alloc (); ++ if (qtd == NULL) { ++ return NULL; ++ } ++ ++ dwc_otg_hcd_qtd_init (qtd, urb); ++ return qtd; ++} ++ ++/** ++ * Initializes a QTD structure. ++ * ++ * @param[in] qtd The QTD to initialize. ++ * @param[in] urb The URB to use for initialization. */ ++void dwc_otg_hcd_qtd_init (dwc_otg_qtd_t *qtd, struct urb *urb) ++{ ++ memset (qtd, 0, sizeof (dwc_otg_qtd_t)); ++ qtd->urb = urb; ++ if (usb_pipecontrol(urb->pipe)) { ++ /* ++ * The only time the QTD data toggle is used is on the data ++ * phase of control transfers. This phase always starts with ++ * DATA1. ++ */ ++ qtd->data_toggle = DWC_OTG_HC_PID_DATA1; ++ qtd->control_phase = DWC_OTG_CONTROL_SETUP; ++ } ++ ++ /* start split */ ++ qtd->complete_split = 0; ++ qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL; ++ qtd->isoc_split_offset = 0; ++ ++ /* Store the qtd ptr in the urb to reference what QTD. */ ++ urb->hcpriv = qtd; ++ return; ++} ++ ++/** ++ * This function adds a QTD to the QTD-list of a QH. It will find the correct ++ * QH to place the QTD into. If it does not find a QH, then it will create a ++ * new QH. If the QH to which the QTD is added is not currently scheduled, it ++ * is placed into the proper schedule based on its EP type. ++ * ++ * @param[in] qtd The QTD to add ++ * @param[in] dwc_otg_hcd The DWC HCD structure ++ * ++ * @return 0 if successful, negative error code otherwise. ++ */ ++int dwc_otg_hcd_qtd_add (dwc_otg_qtd_t *qtd, ++ dwc_otg_hcd_t *dwc_otg_hcd) ++{ ++ struct usb_host_endpoint *ep; ++ dwc_otg_qh_t *qh; ++ unsigned long flags; ++ int retval = 0; ++ ++ struct urb *urb = qtd->urb; ++ ++ SPIN_LOCK_IRQSAVE(&dwc_otg_hcd->lock, flags); ++ ++ /* ++ * Get the QH which holds the QTD-list to insert to. Create QH if it ++ * doesn't exist. ++ */ ++ ep = dwc_urb_to_endpoint(urb); ++ qh = (dwc_otg_qh_t *)ep->hcpriv; ++ if (qh == NULL) { ++ qh = dwc_otg_hcd_qh_create (dwc_otg_hcd, urb); ++ if (qh == NULL) { ++ goto done; ++ } ++ ep->hcpriv = qh; ++ } ++ ++ retval = dwc_otg_hcd_qh_add(dwc_otg_hcd, qh); ++ if (retval == 0) { ++ list_add_tail(&qtd->qtd_list_entry, &qh->qtd_list); ++ } ++ ++ done: ++ SPIN_UNLOCK_IRQRESTORE(&dwc_otg_hcd->lock, flags); ++ ++ return retval; ++} ++ ++#endif /* DWC_DEVICE_ONLY */ +diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd.c b/drivers/usb/dwc_otg/dwc_otg_pcd.c +new file mode 100644 +index 0000000..030a3f2 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_pcd.c +@@ -0,0 +1,2523 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $ ++ * $Revision: 1.5 $ ++ * $Date: 2008-11-27 09:21:25 $ ++ * $Change: 1115682 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++ ++/** @file ++ * This file implements the Peripheral Controller Driver. ++ * ++ * The Peripheral Controller Driver (PCD) is responsible for ++ * translating requests from the Function Driver into the appropriate ++ * actions on the DWC_otg controller. It isolates the Function Driver ++ * from the specifics of the controller by providing an API to the ++ * Function Driver. ++ * ++ * The Peripheral Controller Driver for Linux will implement the ++ * Gadget API, so that the existing Gadget drivers can be used. ++ * (Gadget Driver is the Linux terminology for a Function Driver.) ++ * ++ * The Linux Gadget API is defined in the header file ++ * <code><linux/usb_gadget.h></code>. The USB EP operations API is ++ * defined in the structure <code>usb_ep_ops</code> and the USB ++ * Controller API is defined in the structure ++ * <code>usb_gadget_ops</code>. ++ * ++ * An important function of the PCD is managing interrupts generated ++ * by the DWC_otg controller. The implementation of the DWC_otg device ++ * mode interrupt service routines is in dwc_otg_pcd_intr.c. ++ * ++ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc). ++ * @todo Does it work when the request size is greater than DEPTSIZ ++ * transfer size ++ * ++ */ ++ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/device.h> ++#include <linux/errno.h> ++#include <linux/list.h> ++#include <linux/interrupt.h> ++#include <linux/string.h> ++#include <linux/dma-mapping.h> ++#include <linux/version.h> ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) ++# include <linux/usb/ch9.h> ++#else ++# include <linux/usb_ch9.h> ++#endif ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) ++#include <linux/usb/gadget.h> ++#else ++#include <linux/usb_gadget.h> ++#endif ++ ++#include "dwc_otg_driver.h" ++#include "dwc_otg_pcd.h" ++ ++ ++/** ++ * Static PCD pointer for use in usb_gadget_register_driver and ++ * usb_gadget_unregister_driver. Initialized in dwc_otg_pcd_init. ++ */ ++static dwc_otg_pcd_t *s_pcd = 0; ++ ++ ++/* Display the contents of the buffer */ ++extern void dump_msg(const u8 *buf, unsigned int length); ++ ++ ++/** ++ * This function completes a request. It call's the request call back. ++ */ ++void dwc_otg_request_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_request_t *req, ++ int status) ++{ ++ unsigned stopped = ep->stopped; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, ep); ++ list_del_init(&req->queue); ++ ++ if (req->req.status == -EINPROGRESS) { ++ req->req.status = status; ++ } else { ++ status = req->req.status; ++ } ++ ++ /* don't modify queue heads during completion callback */ ++ ep->stopped = 1; ++ SPIN_UNLOCK(&ep->pcd->lock); ++ req->req.complete(&ep->ep, &req->req); ++ SPIN_LOCK(&ep->pcd->lock); ++ ++ if (ep->pcd->request_pending > 0) { ++ --ep->pcd->request_pending; ++ } ++ ++ ep->stopped = stopped; ++} ++ ++/** ++ * This function terminates all the requsts in the EP request queue. ++ */ ++void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *ep) ++{ ++ dwc_otg_pcd_request_t *req; ++ ++ ep->stopped = 1; ++ ++ /* called with irqs blocked?? */ ++ while (!list_empty(&ep->queue)) { ++ req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, ++ queue); ++ dwc_otg_request_done(ep, req, -ESHUTDOWN); ++ } ++} ++ ++/* USB Endpoint Operations */ ++/* ++ * The following sections briefly describe the behavior of the Gadget ++ * API endpoint operations implemented in the DWC_otg driver ++ * software. Detailed descriptions of the generic behavior of each of ++ * these functions can be found in the Linux header file ++ * include/linux/usb_gadget.h. ++ * ++ * The Gadget API provides wrapper functions for each of the function ++ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper ++ * function, which then calls the underlying PCD function. The ++ * following sections are named according to the wrapper ++ * functions. Within each section, the corresponding DWC_otg PCD ++ * function name is specified. ++ * ++ */ ++ ++/** ++ * This function assigns periodic Tx FIFO to an periodic EP ++ * in shared Tx FIFO mode ++ */ ++static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t *core_if) ++{ ++ uint32_t PerTxMsk = 1; ++ int i; ++ for(i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) ++ { ++ if((PerTxMsk & core_if->p_tx_msk) == 0) { ++ core_if->p_tx_msk |= PerTxMsk; ++ return i + 1; ++ } ++ PerTxMsk <<= 1; ++ } ++ return 0; ++} ++/** ++ * This function releases periodic Tx FIFO ++ * in shared Tx FIFO mode ++ */ ++static void release_perio_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num) ++{ ++ core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk; ++} ++/** ++ * This function assigns periodic Tx FIFO to an periodic EP ++ * in shared Tx FIFO mode ++ */ ++static uint32_t assign_tx_fifo(dwc_otg_core_if_t *core_if) ++{ ++ uint32_t TxMsk = 1; ++ int i; ++ ++ for(i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) ++ { ++ if((TxMsk & core_if->tx_msk) == 0) { ++ core_if->tx_msk |= TxMsk; ++ return i + 1; ++ } ++ TxMsk <<= 1; ++ } ++ return 0; ++} ++/** ++ * This function releases periodic Tx FIFO ++ * in shared Tx FIFO mode ++ */ ++static void release_tx_fifo(dwc_otg_core_if_t *core_if, uint32_t fifo_num) ++{ ++ core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk; ++} ++ ++/** ++ * This function is called by the Gadget Driver for each EP to be ++ * configured for the current configuration (SET_CONFIGURATION). ++ * ++ * This function initializes the dwc_otg_ep_t data structure, and then ++ * calls dwc_otg_ep_activate. ++ */ ++static int dwc_otg_pcd_ep_enable(struct usb_ep *usb_ep, ++ const struct usb_endpoint_descriptor *ep_desc) ++{ ++ dwc_otg_pcd_ep_t *ep = 0; ++ dwc_otg_pcd_t *pcd = 0; ++ unsigned long flags; ++ ++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, ep_desc); ++ ++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); ++ if (!usb_ep || !ep_desc || ep->desc || ++ ep_desc->bDescriptorType != USB_DT_ENDPOINT) { ++ DWC_WARN("%s, bad ep or descriptor\n", __func__); ++ return -EINVAL; ++ } ++ if (ep == &ep->pcd->ep0) { ++ DWC_WARN("%s, bad ep(0)\n", __func__); ++ return -EINVAL; ++ } ++ ++ /* Check FIFO size? */ ++ if (!ep_desc->wMaxPacketSize) { ++ DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name); ++ return -ERANGE; ++ } ++ ++ pcd = ep->pcd; ++ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_WARN("%s, bogus device state\n", __func__); ++ return -ESHUTDOWN; ++ } ++ ++ SPIN_LOCK_IRQSAVE(&pcd->lock, flags); ++ ++ ep->desc = ep_desc; ++ ep->ep.maxpacket = le16_to_cpu (ep_desc->wMaxPacketSize); ++ ++ /* ++ * Activate the EP ++ */ ++ ep->stopped = 0; ++ ++ ep->dwc_ep.is_in = (USB_DIR_IN & ep_desc->bEndpointAddress) != 0; ++ ep->dwc_ep.maxpacket = ep->ep.maxpacket; ++ ++ ep->dwc_ep.type = ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; ++ ++ if(ep->dwc_ep.is_in) { ++ if(!pcd->otg_dev->core_if->en_multiple_tx_fifo) { ++ ep->dwc_ep.tx_fifo_num = 0; ++ ++ if (ep->dwc_ep.type == USB_ENDPOINT_XFER_ISOC) { ++ /* ++ * if ISOC EP then assign a Periodic Tx FIFO. ++ */ ++ ep->dwc_ep.tx_fifo_num = assign_perio_tx_fifo(pcd->otg_dev->core_if); ++ } ++ } else { ++ /* ++ * if Dedicated FIFOs mode is on then assign a Tx FIFO. ++ */ ++ ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if); ++ ++ } ++ } ++ /* Set initial data PID. */ ++ if (ep->dwc_ep.type == USB_ENDPOINT_XFER_BULK) { ++ ep->dwc_ep.data_pid_start = 0; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "Activate %s-%s: type=%d, mps=%d desc=%p\n", ++ ep->ep.name, (ep->dwc_ep.is_in ?"IN":"OUT"), ++ ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc); ++ ++ if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC) { ++ ep->dwc_ep.desc_addr = dwc_otg_ep_alloc_desc_chain(&ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT); ++ } ++ ++ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); ++ ++ return 0; ++} ++ ++/** ++ * This function is called when an EP is disabled due to disconnect or ++ * change in configuration. Any pending requests will terminate with a ++ * status of -ESHUTDOWN. ++ * ++ * This function modifies the dwc_otg_ep_t data structure for this EP, ++ * and then calls dwc_otg_ep_deactivate. ++ */ ++static int dwc_otg_pcd_ep_disable(struct usb_ep *usb_ep) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_pcd_t *pcd = 0; ++ unsigned long flags; ++ ++ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, usb_ep); ++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); ++ if (!usb_ep || !ep->desc) { ++ DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__, ++ usb_ep ? ep->ep.name : NULL); ++ return -EINVAL; ++ } ++ ++ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); ++ ++ dwc_otg_request_nuke(ep); ++ ++ dwc_otg_ep_deactivate(GET_CORE_IF(ep->pcd), &ep->dwc_ep); ++ ep->desc = 0; ++ ep->stopped = 1; ++ ++ if(ep->dwc_ep.is_in) { ++ dwc_otg_flush_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num); ++ release_perio_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num); ++ release_tx_fifo(GET_CORE_IF(ep->pcd), ep->dwc_ep.tx_fifo_num); ++ } ++ ++ /* Free DMA Descriptors */ ++ pcd = ep->pcd; ++ ++ SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags); ++ ++ if(ep->dwc_ep.type != USB_ENDPOINT_XFER_ISOC && ep->dwc_ep.desc_addr) { ++ dwc_otg_ep_free_desc_chain(ep->dwc_ep.desc_addr, ep->dwc_ep.dma_desc_addr, MAX_DMA_DESC_CNT); ++ } ++ ++ DWC_DEBUGPL(DBG_PCD, "%s disabled\n", usb_ep->name); ++ return 0; ++} ++ ++ ++/** ++ * This function allocates a request object to use with the specified ++ * endpoint. ++ * ++ * @param ep The endpoint to be used with with the request ++ * @param gfp_flags the GFP_* flags to use. ++ */ ++static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ int gfp_flags ++#else ++ gfp_t gfp_flags ++#endif ++ ) ++{ ++ dwc_otg_pcd_request_t *req; ++ ++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d)\n", __func__, ep, gfp_flags); ++ if (0 == ep) { ++ DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n"); ++ return 0; ++ } ++ req = kmalloc(sizeof(dwc_otg_pcd_request_t), gfp_flags); ++ if (0 == req) { ++ DWC_WARN("%s() %s\n", __func__, ++ "request allocation failed!\n"); ++ return 0; ++ } ++ memset(req, 0, sizeof(dwc_otg_pcd_request_t)); ++ req->req.dma = DMA_ADDR_INVALID; ++ INIT_LIST_HEAD(&req->queue); ++ return &req->req; ++} ++ ++/** ++ * This function frees a request object. ++ * ++ * @param ep The endpoint associated with the request ++ * @param req The request being freed ++ */ ++static void dwc_otg_pcd_free_request(struct usb_ep *ep, ++ struct usb_request *req) ++{ ++ dwc_otg_pcd_request_t *request; ++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, ep, req); ++ ++ if (0 == ep || 0 == req) { ++ DWC_WARN("%s() %s\n", __func__, ++ "Invalid ep or req argument!\n"); ++ return; ++ } ++ ++ request = container_of(req, dwc_otg_pcd_request_t, req); ++ kfree(request); ++} ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) ++/** ++ * This function allocates an I/O buffer to be used for a transfer ++ * to/from the specified endpoint. ++ * ++ * @param usb_ep The endpoint to be used with with the request ++ * @param bytes The desired number of bytes for the buffer ++ * @param dma Pointer to the buffer's DMA address; must be valid ++ * @param gfp_flags the GFP_* flags to use. ++ * @return address of a new buffer or null is buffer could not be allocated. ++ */ ++static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes, ++ dma_addr_t *dma, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ int gfp_flags ++#else ++ gfp_t gfp_flags ++#endif ++ ) ++{ ++ void *buf; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_pcd_t *pcd = 0; ++ ++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); ++ pcd = ep->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes, ++ dma, gfp_flags); ++ ++ /* Check dword alignment */ ++ if ((bytes & 0x3UL) != 0) { ++ DWC_WARN("%s() Buffer size is not a multiple of" ++ "DWORD size (%d)",__func__, bytes); ++ } ++ ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ buf = dma_alloc_coherent (NULL, bytes, dma, gfp_flags); ++ } ++ else { ++ buf = kmalloc(bytes, gfp_flags); ++ } ++ ++ /* Check dword alignment */ ++ if (((int)buf & 0x3UL) != 0) { ++ DWC_WARN("%s() Buffer is not DWORD aligned (%p)", ++ __func__, buf); ++ } ++ ++ return buf; ++} ++ ++/** ++ * This function frees an I/O buffer that was allocated by alloc_buffer. ++ * ++ * @param usb_ep the endpoint associated with the buffer ++ * @param buf address of the buffer ++ * @param dma The buffer's DMA address ++ * @param bytes The number of bytes of the buffer ++ */ ++static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf, ++ dma_addr_t dma, unsigned bytes) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_pcd_t *pcd = 0; ++ ++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); ++ pcd = ep->pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%0x,%d)\n", __func__, ep, buf, dma, bytes); ++ ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ dma_free_coherent (NULL, bytes, buf, dma); ++ } ++ else { ++ kfree(buf); ++ } ++} ++#endif ++ ++ ++/** ++ * This function is used to submit an I/O Request to an EP. ++ * ++ * - When the request completes the request's completion callback ++ * is called to return the request to the driver. ++ * - An EP, except control EPs, may have multiple requests ++ * pending. ++ * - Once submitted the request cannot be examined or modified. ++ * - Each request is turned into one or more packets. ++ * - A BULK EP can queue any amount of data; the transfer is ++ * packetized. ++ * - Zero length Packets are specified with the request 'zero' ++ * flag. ++ */ ++static int dwc_otg_pcd_ep_queue(struct usb_ep *usb_ep, ++ struct usb_request *usb_req, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ int gfp_flags ++#else ++ gfp_t gfp_flags ++#endif ++ ) ++{ ++ int prevented = 0; ++ dwc_otg_pcd_request_t *req; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_pcd_t *pcd; ++ unsigned long flags = 0; ++ dwc_otg_core_if_t *_core_if; ++ ++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p,%d)\n", ++ __func__, usb_ep, usb_req, gfp_flags); ++ ++ req = container_of(usb_req, dwc_otg_pcd_request_t, req); ++ if (!usb_req || !usb_req->complete || !usb_req->buf || ++ !list_empty(&req->queue)) { ++ DWC_WARN("%s, bad params\n", __func__); ++ return -EINVAL; ++ } ++ ++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); ++ if (!usb_ep || (!ep->desc && ep->dwc_ep.num != 0)/* || ep->stopped != 0*/) { ++ DWC_WARN("%s, bad ep\n", __func__); ++ return -EINVAL; ++ } ++ ++ pcd = ep->pcd; ++ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed); ++ DWC_WARN("%s, bogus device state\n", __func__); ++ return -ESHUTDOWN; ++ } ++ ++ ++ DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n", ++ usb_ep->name, usb_req, usb_req->length, usb_req->buf); ++ ++ if (!GET_CORE_IF(pcd)->core_params->opt) { ++ if (ep->dwc_ep.num != 0) { ++ DWC_ERROR("%s queue req %p, len %d buf %p\n", ++ usb_ep->name, usb_req, usb_req->length, usb_req->buf); ++ } ++ } ++ ++ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); ++ ++ ++ /************************************************** ++ New add by kaiker ,for DMA mode bug ++ ************************************************/ ++ //by kaiker ,for RT3052 USB OTG device mode ++ ++ _core_if = GET_CORE_IF(pcd); ++ ++ if (_core_if->dma_enable) ++ { ++ usb_req->dma = virt_to_phys((void *)usb_req->buf); ++ ++ if(ep->dwc_ep.is_in) ++ { ++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24)) || defined(CONFIG_MIPS) ++ if(usb_req->length) ++ dma_cache_wback_inv((unsigned long)usb_req->buf, usb_req->length + 2); ++#endif ++ } ++ } ++ ++ ++ ++#if defined(DEBUG) & defined(VERBOSE) ++ dump_msg(usb_req->buf, usb_req->length); ++#endif ++ ++ usb_req->status = -EINPROGRESS; ++ usb_req->actual = 0; ++ ++ /* ++ * For EP0 IN without premature status, zlp is required? ++ */ ++ if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) { ++ DWC_DEBUGPL(DBG_PCDV, "%s-OUT ZLP\n", usb_ep->name); ++ //_req->zero = 1; ++ } ++ ++ /* Start the transfer */ ++ if (list_empty(&ep->queue) && !ep->stopped) { ++ /* EP0 Transfer? */ ++ if (ep->dwc_ep.num == 0) { ++ switch (pcd->ep0state) { ++ case EP0_IN_DATA_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_IN_DATA_PHASE\n", ++ __func__); ++ break; ++ ++ case EP0_OUT_DATA_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_OUT_DATA_PHASE\n", ++ __func__); ++ if (pcd->request_config) { ++ /* Complete STATUS PHASE */ ++ ep->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ } ++ break; ++ ++ case EP0_IN_STATUS_PHASE: ++ DWC_DEBUGPL(DBG_PCD, ++ "%s ep0: EP0_IN_STATUS_PHASE\n", ++ __func__); ++ break; ++ ++ default: ++ DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n", ++ pcd->ep0state); ++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); ++ return -EL2HLT; ++ } ++ ep->dwc_ep.dma_addr = usb_req->dma; ++ ep->dwc_ep.start_xfer_buff = usb_req->buf; ++ ep->dwc_ep.xfer_buff = usb_req->buf; ++ ep->dwc_ep.xfer_len = usb_req->length; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; ++ ++ if(usb_req->zero) { ++ if((ep->dwc_ep.xfer_len % ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.xfer_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ ++ } ++ ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } ++ else { ++ ++ uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size; ++ ++ /* Setup and start the Transfer */ ++ ep->dwc_ep.dma_addr = usb_req->dma; ++ ep->dwc_ep.start_xfer_buff = usb_req->buf; ++ ep->dwc_ep.xfer_buff = usb_req->buf; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = usb_req->length; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ++ if(max_transfer > MAX_TRANSFER_SIZE) { ++ ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket); ++ } else { ++ ep->dwc_ep.maxxfer = max_transfer; ++ } ++ ++ if(usb_req->zero) { ++ if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.total_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ ++ } ++ dwc_otg_ep_start_transfer(GET_CORE_IF(pcd), &ep->dwc_ep); ++ } ++ } ++ ++ if ((req != 0) || prevented) { ++ ++pcd->request_pending; ++ list_add_tail(&req->queue, &ep->queue); ++ if (ep->dwc_ep.is_in && ep->stopped && !(GET_CORE_IF(pcd)->dma_enable)) { ++ /** @todo NGS Create a function for this. */ ++ diepmsk_data_t diepmsk = { .d32 = 0}; ++ diepmsk.b.intktxfemp = 1; ++ if(&GET_CORE_IF(pcd)->multiproc_int_enable) { ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepeachintmsk[ep->dwc_ep.num], ++ 0, diepmsk.d32); ++ } else { ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32); ++ } ++ } ++ } ++ ++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); ++ return 0; ++} ++ ++/** ++ * This function cancels an I/O request from an EP. ++ */ ++static int dwc_otg_pcd_ep_dequeue(struct usb_ep *usb_ep, ++ struct usb_request *usb_req) ++{ ++ dwc_otg_pcd_request_t *req; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_pcd_t *pcd; ++ unsigned long flags; ++ ++ DWC_DEBUGPL(DBG_PCDV,"%s(%p,%p)\n", __func__, usb_ep, usb_req); ++ ++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); ++ if (!usb_ep || !usb_req || (!ep->desc && ep->dwc_ep.num != 0)) { ++ DWC_WARN("%s, bad argument\n", __func__); ++ return -EINVAL; ++ } ++ pcd = ep->pcd; ++ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_WARN("%s, bogus device state\n", __func__); ++ return -ESHUTDOWN; ++ } ++ ++ SPIN_LOCK_IRQSAVE(&pcd->lock, flags); ++ DWC_DEBUGPL(DBG_PCDV, "%s %s %s %p\n", __func__, usb_ep->name, ++ ep->dwc_ep.is_in ? "IN" : "OUT", ++ usb_req); ++ ++ /* make sure it's actually queued on this endpoint */ ++ list_for_each_entry(req, &ep->queue, queue) ++ { ++ if (&req->req == usb_req) { ++ break; ++ } ++ } ++ ++ if (&req->req != usb_req) { ++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); ++ return -EINVAL; ++ } ++ ++ if (!list_empty(&req->queue)) { ++ dwc_otg_request_done(ep, req, -ECONNRESET); ++ } ++ else { ++ req = 0; ++ } ++ ++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); ++ ++ return req ? 0 : -EOPNOTSUPP; ++} ++ ++/** ++ * usb_ep_set_halt stalls an endpoint. ++ * ++ * usb_ep_clear_halt clears an endpoint halt and resets its data ++ * toggle. ++ * ++ * Both of these functions are implemented with the same underlying ++ * function. The behavior depends on the value argument. ++ * ++ * @param[in] usb_ep the Endpoint to halt or clear halt. ++ * @param[in] value ++ * - 0 means clear_halt. ++ * - 1 means set_halt, ++ * - 2 means clear stall lock flag. ++ * - 3 means set stall lock flag. ++ */ ++static int dwc_otg_pcd_ep_set_halt(struct usb_ep *usb_ep, int value) ++{ ++ int retval = 0; ++ unsigned long flags; ++ dwc_otg_pcd_ep_t *ep = 0; ++ ++ ++ DWC_DEBUGPL(DBG_PCD,"HALT %s %d\n", usb_ep->name, value); ++ ++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); ++ ++ if (!usb_ep || (!ep->desc && ep != &ep->pcd->ep0) || ++ ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { ++ DWC_WARN("%s, bad ep\n", __func__); ++ return -EINVAL; ++ } ++ ++ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); ++ if (!list_empty(&ep->queue)) { ++ DWC_WARN("%s() %s XFer In process\n", __func__, usb_ep->name); ++ retval = -EAGAIN; ++ } ++ else if (value == 0) { ++ dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if, ++ &ep->dwc_ep); ++ } ++ else if(value == 1) { ++ if (ep->dwc_ep.is_in == 1 && ep->pcd->otg_dev->core_if->dma_desc_enable) { ++ dtxfsts_data_t txstatus; ++ fifosize_data_t txfifosize; ++ ++ txfifosize.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->core_global_regs->dptxfsiz_dieptxf[ep->dwc_ep.tx_fifo_num]); ++ txstatus.d32 = dwc_read_reg32(&ep->pcd->otg_dev->core_if->dev_if->in_ep_regs[ep->dwc_ep.num]->dtxfsts); ++ ++ if(txstatus.b.txfspcavail < txfifosize.b.depth) { ++ DWC_WARN("%s() %s Data In Tx Fifo\n", __func__, usb_ep->name); ++ retval = -EAGAIN; ++ } ++ else { ++ if (ep->dwc_ep.num == 0) { ++ ep->pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if, ++ &ep->dwc_ep); ++ } ++ } ++ else { ++ if (ep->dwc_ep.num == 0) { ++ ep->pcd->ep0state = EP0_STALL; ++ } ++ ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if, ++ &ep->dwc_ep); ++ } ++ } ++ else if (value == 2) { ++ ep->dwc_ep.stall_clear_flag = 0; ++ } ++ else if (value == 3) { ++ ep->dwc_ep.stall_clear_flag = 1; ++ } ++ ++ SPIN_UNLOCK_IRQRESTORE(&ep->pcd->lock, flags); ++ return retval; ++} ++ ++/** ++ * This function allocates a DMA Descriptor chain for the Endpoint ++ * buffer to be used for a transfer to/from the specified endpoint. ++ */ ++dwc_otg_dma_desc_t* dwc_otg_ep_alloc_desc_chain(uint32_t * dma_desc_addr, uint32_t count) ++{ ++ ++ return dma_alloc_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), dma_desc_addr, GFP_KERNEL); ++} ++ ++/** ++ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc. ++ */ ++void dwc_otg_ep_free_desc_chain(dwc_otg_dma_desc_t* desc_addr, uint32_t dma_desc_addr, uint32_t count) ++{ ++ dma_free_coherent(NULL, count * sizeof(dwc_otg_dma_desc_t), desc_addr, dma_desc_addr); ++} ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep) ++{ ++ ++ dsts_data_t dsts = { .d32 = 0}; ++ depctl_data_t depctl = { .d32 = 0 }; ++ volatile uint32_t *addr; ++ int i, j; ++ ++ if(dwc_ep->is_in) ++ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval; ++ else ++ dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval; ++ ++ ++ /** Allocate descriptors for double buffering */ ++ dwc_ep->iso_desc_addr = dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,dwc_ep->desc_cnt*2); ++ if(dwc_ep->desc_addr) { ++ DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__); ++ return; ++ } ++ ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ /** ISO OUT EP */ ++ if(dwc_ep->is_in == 0) { ++ desc_sts_data_t sts = { .d32 =0 }; ++ dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr; ++ dma_addr_t dma_ad; ++ uint32_t data_per_desc; ++ dwc_otg_dev_out_ep_regs_t *out_regs = ++ core_if->dev_if->out_ep_regs[dwc_ep->num]; ++ int offset; ++ ++ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; ++ dma_ad = (dma_addr_t)dwc_read_reg32(&(out_regs->doepdma)); ++ ++ /** Buffer 0 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr0; ++ ++ sts.b_iso_out.bs = BS_HOST_READY; ++ sts.b_iso_out.rxsts = 0; ++ sts.b_iso_out.l = 0; ++ sts.b_iso_out.sp = 0; ++ sts.b_iso_out.ioc = 0; ++ sts.b_iso_out.pid = 0; ++ sts.b_iso_out.framenum = 0; ++ ++ offset = 0; ++ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) ++ { ++ ++ for(j = 0; j < dwc_ep->pkt_per_frm; ++j) ++ { ++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ ++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ ++ offset += data_per_desc; ++ dma_desc ++; ++ (uint32_t)dma_ad += data_per_desc; ++ } ++ } ++ ++ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) ++ { ++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ ++ offset += data_per_desc; ++ dma_desc ++; ++ (uint32_t)dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ dma_desc ++; ++ ++ /** Buffer 1 descriptors setup */ ++ sts.b_iso_out.ioc = 0; ++ dma_ad = dwc_ep->dma_addr1; ++ ++ offset = 0; ++ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) ++ { ++ for(j = 0; j < dwc_ep->pkt_per_frm; ++j) ++ { ++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ ++ offset += data_per_desc; ++ dma_desc ++; ++ (uint32_t)dma_ad += data_per_desc; ++ } ++ } ++ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) ++ { ++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ ++ offset += data_per_desc; ++ dma_desc ++; ++ (uint32_t)dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ sts.b_iso_out.l = 1; ++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ ++ dwc_ep->next_frame = 0; ++ ++ /** Write dma_ad into DOEPDMA register */ ++ dwc_write_reg32(&(out_regs->doepdma),(uint32_t)dwc_ep->iso_dma_desc_addr); ++ ++ } ++ /** ISO IN EP */ ++ else { ++ desc_sts_data_t sts = { .d32 =0 }; ++ dwc_otg_dma_desc_t* dma_desc = dwc_ep->iso_desc_addr; ++ dma_addr_t dma_ad; ++ dwc_otg_dev_in_ep_regs_t *in_regs = ++ core_if->dev_if->in_ep_regs[dwc_ep->num]; ++ unsigned int frmnumber; ++ fifosize_data_t txfifosize,rxfifosize; ++ ++ txfifosize.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->dtxfsts); ++ rxfifosize.d32 = dwc_read_reg32(&core_if->core_global_regs->grxfsiz); ++ ++ ++ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ ++ dma_ad = dwc_ep->dma_addr0; ++ ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ sts.b_iso_in.bs = BS_HOST_READY; ++ sts.b_iso_in.txsts = 0; ++ sts.b_iso_in.sp = (dwc_ep->data_per_frame % dwc_ep->maxpacket)? 1 : 0; ++ sts.b_iso_in.ioc = 0; ++ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; ++ ++ ++ frmnumber = dwc_ep->next_frame; ++ ++ sts.b_iso_in.framenum = frmnumber; ++ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; ++ sts.b_iso_in.l = 0; ++ ++ /** Buffer 0 descriptors setup */ ++ for(i = 0; i < dwc_ep->desc_cnt - 1; i++) ++ { ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ dma_desc ++; ++ ++ (uint32_t)dma_ad += dwc_ep->data_per_frame; ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ } ++ ++ sts.b_iso_in.ioc = 1; ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ ++dma_desc; ++ ++ /** Buffer 1 descriptors setup */ ++ sts.b_iso_in.ioc = 0; ++ dma_ad = dwc_ep->dma_addr1; ++ ++ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) ++ { ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ dma_desc ++; ++ ++ (uint32_t)dma_ad += dwc_ep->data_per_frame; ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ ++ sts.b_iso_in.ioc = 0; ++ } ++ sts.b_iso_in.ioc = 1; ++ sts.b_iso_in.l = 1; ++ ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ ++ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval; ++ ++ /** Write dma_ad into diepdma register */ ++ dwc_write_reg32(&(in_regs->diepdma),(uint32_t)dwc_ep->iso_dma_desc_addr); ++ } ++ /** Enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.usbactep = 1; ++ depctl.b.cnak = 1; ++ ++ dwc_modify_reg32(addr, depctl.d32,depctl.d32); ++ depctl.d32 = dwc_read_reg32(addr); ++} ++ ++/** ++ * This function initializes a descriptor chain for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++ ++void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ depctl_data_t depctl = { .d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ ++ if(ep->is_in) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ ++ if(core_if->dma_enable == 0 || core_if->dma_desc_enable!= 0) { ++ return; ++ } else { ++ deptsiz_data_t deptsiz = { .d32 = 0 }; ++ ++ ep->xfer_len = ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval; ++ ep->pkt_cnt = (ep->xfer_len - 1 + ep->maxpacket) / ++ ep->maxpacket; ++ ep->xfer_count = 0; ++ ep->xfer_buff = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; ++ ep->dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; ++ ++ if(ep->is_in) { ++ /* Program the transfer size and packet count ++ * as follows: xfersize = N * maxpacket + ++ * short_packet pktcnt = N + (short_packet ++ * exist ? 1 : 0) ++ */ ++ deptsiz.b.mc = ep->pkt_per_frm; ++ deptsiz.b.xfersize = ep->xfer_len; ++ deptsiz.b.pktcnt = ++ (ep->xfer_len - 1 + ep->maxpacket) / ++ ep->maxpacket; ++ dwc_write_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ dwc_write_reg32 (&(core_if->dev_if->in_ep_regs[ep->num]->diepdma), (uint32_t)ep->dma_addr); ++ ++ } else { ++ deptsiz.b.pktcnt = ++ (ep->xfer_len + (ep->maxpacket - 1)) / ++ ep->maxpacket; ++ deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket; ++ ++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz, deptsiz.d32); ++ ++ /* Write the DMA register */ ++ dwc_write_reg32 (&(core_if->dev_if->out_ep_regs[ep->num]->doepdma), (uint32_t)ep->dma_addr); ++ ++ } ++ /** Enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ dwc_modify_reg32(addr, depctl.d32,depctl.d32); ++ ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ dwc_modify_reg32(addr, depctl.d32,depctl.d32); ++ } ++} ++ ++ ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ if(core_if->dma_enable) { ++ if(core_if->dma_desc_enable) { ++ if(ep->is_in) { ++ ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm; ++ } else { ++ ep->desc_cnt = ep->pkt_cnt; ++ } ++ dwc_otg_iso_ep_start_ddma_transfer(core_if, ep); ++ } else { ++ if(core_if->pti_enh_enable) { ++ dwc_otg_iso_ep_start_buf_transfer(core_if, ep); ++ } else { ++ ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; ++ ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); ++ } ++ } ++ } else { ++ ep->cur_pkt_addr = (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0; ++ ep->cur_pkt_dma_addr = (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0; ++ dwc_otg_iso_ep_start_frm_transfer(core_if, ep); ++ } ++} ++ ++/** ++ * This function does the setup for a data transfer for an EP and ++ * starts the transfer. For an IN transfer, the packets will be ++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers, ++ * the packets are unloaded from the Rx FIFO in the ISR. the ISR. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ */ ++ ++void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ depctl_data_t depctl = { .d32 = 0 }; ++ volatile uint32_t *addr; ++ ++ if(ep->is_in == 1) { ++ addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl; ++ } ++ else { ++ addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl; ++ } ++ ++ /* disable the ep */ ++ depctl.d32 = dwc_read_reg32(addr); ++ ++ depctl.b.epdis = 1; ++ depctl.b.snak = 1; ++ ++ dwc_write_reg32(addr, depctl.d32); ++ ++ if(core_if->dma_desc_enable && ++ ep->iso_desc_addr && ep->iso_dma_desc_addr) { ++ dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,ep->iso_dma_desc_addr,ep->desc_cnt * 2); ++ } ++ ++ /* reset varibales */ ++ ep->dma_addr0 = 0; ++ ep->dma_addr1 = 0; ++ ep->xfer_buff0 = 0; ++ ep->xfer_buff1 = 0; ++ ep->data_per_frame = 0; ++ ep->data_pattern_frame = 0; ++ ep->sync_frame = 0; ++ ep->buf_proc_intrvl = 0; ++ ep->bInterval = 0; ++ ep->proc_buf_num = 0; ++ ep->pkt_per_frm = 0; ++ ep->pkt_per_frm = 0; ++ ep->desc_cnt = 0; ++ ep->iso_desc_addr = 0; ++ ep->iso_dma_desc_addr = 0; ++} ++ ++ ++/** ++ * This function is used to submit an ISOC Transfer Request to an EP. ++ * ++ * - Every time a sync period completes the request's completion callback ++ * is called to provide data to the gadget driver. ++ * - Once submitted the request cannot be modified. ++ * - Each request is turned into periodic data packets untill ISO ++ * Transfer is stopped.. ++ */ ++static int dwc_otg_pcd_iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ int gfp_flags ++#else ++ gfp_t gfp_flags ++#endif ++) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_pcd_t *pcd; ++ dwc_ep_t *dwc_ep; ++ unsigned long flags = 0; ++ int32_t frm_data; ++ dwc_otg_core_if_t *core_if; ++ dcfg_data_t dcfg; ++ dsts_data_t dsts; ++ ++ ++ if (!req || !req->process_buffer || !req->buf0 || !req->buf1) { ++ DWC_WARN("%s, bad params\n", __func__); ++ return -EINVAL; ++ } ++ ++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); ++ ++ if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("%s, bad ep\n", __func__); ++ return -EINVAL; ++ } ++ ++ pcd = ep->pcd; ++ core_if = GET_CORE_IF(pcd); ++ ++ dcfg.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dcfg); ++ ++ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed); ++ DWC_WARN("%s, bogus device state\n", __func__); ++ return -ESHUTDOWN; ++ } ++ ++ SPIN_LOCK_IRQSAVE(&ep->pcd->lock, flags); ++ ++ dwc_ep = &ep->dwc_ep; ++ ++ if(ep->iso_req) { ++ DWC_WARN("%s, iso request in progress\n", __func__); ++ } ++ req->status = -EINPROGRESS; ++ ++ dwc_ep->dma_addr0 = req->dma0; ++ dwc_ep->dma_addr1 = req->dma1; ++ ++ dwc_ep->xfer_buff0 = req->buf0; ++ dwc_ep->xfer_buff1 = req->buf1; ++ ++ ep->iso_req = req; ++ ++ dwc_ep->data_per_frame = req->data_per_frame; ++ ++ /** @todo - pattern data support is to be implemented in the future */ ++ dwc_ep->data_pattern_frame = req->data_pattern_frame; ++ dwc_ep->sync_frame = req->sync_frame; ++ ++ dwc_ep->buf_proc_intrvl = req->buf_proc_intrvl; ++ ++ dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1); ++ ++ dwc_ep->proc_buf_num = 0; ++ ++ dwc_ep->pkt_per_frm = 0; ++ frm_data = ep->dwc_ep.data_per_frame; ++ while(frm_data > 0) { ++ dwc_ep->pkt_per_frm++; ++ frm_data -= ep->dwc_ep.maxpacket; ++ } ++ ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ if(req->flags & USB_REQ_ISO_ASAP) { ++ dwc_ep->next_frame = dsts.b.soffn + 1; ++ if(dwc_ep->bInterval != 1){ ++ dwc_ep->next_frame = dwc_ep->next_frame + (dwc_ep->bInterval - 1 - dwc_ep->next_frame % dwc_ep->bInterval); ++ } ++ } else { ++ dwc_ep->next_frame = req->start_frame; ++ } ++ ++ ++ if(!core_if->pti_enh_enable) { ++ dwc_ep->pkt_cnt = dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval; ++ } else { ++ dwc_ep->pkt_cnt = ++ (dwc_ep->data_per_frame * (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval) ++ - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket; ++ } ++ ++ if(core_if->dma_desc_enable) { ++ dwc_ep->desc_cnt = ++ dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm / dwc_ep->bInterval; ++ } ++ ++ dwc_ep->pkt_info = kmalloc(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt, GFP_KERNEL); ++ if(!dwc_ep->pkt_info) { ++ return -ENOMEM; ++ } ++ if(core_if->pti_enh_enable) { ++ memset(dwc_ep->pkt_info, 0, sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt); ++ } ++ ++ dwc_ep->cur_pkt = 0; ++ ++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); ++ ++ dwc_otg_iso_ep_start_transfer(core_if, dwc_ep); ++ ++ return 0; ++} ++ ++/** ++ * This function stops ISO EP Periodic Data Transfer. ++ */ ++static int dwc_otg_pcd_iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_pcd_t *pcd; ++ dwc_ep_t *dwc_ep; ++ unsigned long flags; ++ ++ ep = container_of(usb_ep, dwc_otg_pcd_ep_t, ep); ++ ++ if (!usb_ep || !ep->desc || ep->dwc_ep.num == 0) { ++ DWC_WARN("%s, bad ep\n", __func__); ++ return -EINVAL; ++ } ++ ++ pcd = ep->pcd; ++ ++ if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { ++ DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n", pcd->gadget.speed); ++ DWC_WARN("%s, bogus device state\n", __func__); ++ return -ESHUTDOWN; ++ } ++ ++ dwc_ep = &ep->dwc_ep; ++ ++ dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep); ++ ++ kfree(dwc_ep->pkt_info); ++ ++ SPIN_LOCK_IRQSAVE(&pcd->lock, flags); ++ ++ if(ep->iso_req != req) { ++ return -EINVAL; ++ } ++ ++ req->status = -ECONNRESET; ++ ++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); ++ ++ ++ ep->iso_req = 0; ++ ++ return 0; ++} ++ ++/** ++ * This function is used for perodical data exchnage between PCD and gadget drivers. ++ * for Isochronous EPs ++ * ++ * - Every time a sync period completes this function is called to ++ * perform data exchange between PCD and gadget ++ */ ++void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req) ++{ ++ int i; ++ struct usb_gadget_iso_packet_descriptor *iso_packet; ++ dwc_ep_t *dwc_ep; ++ ++ dwc_ep = &ep->dwc_ep; ++ ++ if(ep->iso_req->status == -ECONNRESET) { ++ DWC_PRINT("Device has already disconnected\n"); ++ /*Device has been disconnected*/ ++ return; ++ } ++ ++ if(dwc_ep->proc_buf_num != 0) { ++ iso_packet = ep->iso_req->iso_packet_desc0; ++ } ++ ++ else { ++ iso_packet = ep->iso_req->iso_packet_desc1; ++ } ++ ++ /* Fill in ISOC packets descriptors & pass to gadget driver*/ ++ ++ for(i = 0; i < dwc_ep->pkt_cnt; ++i) { ++ iso_packet[i].status = dwc_ep->pkt_info[i].status; ++ iso_packet[i].offset = dwc_ep->pkt_info[i].offset; ++ iso_packet[i].actual_length = dwc_ep->pkt_info[i].length; ++ dwc_ep->pkt_info[i].status = 0; ++ dwc_ep->pkt_info[i].offset = 0; ++ dwc_ep->pkt_info[i].length = 0; ++ } ++ ++ /* Call callback function to process data buffer */ ++ ep->iso_req->status = 0;/* success */ ++ ++ SPIN_UNLOCK(&ep->pcd->lock); ++ ep->iso_req->process_buffer(&ep->ep, ep->iso_req); ++ SPIN_LOCK(&ep->pcd->lock); ++} ++ ++ ++static struct usb_iso_request *dwc_otg_pcd_alloc_iso_request(struct usb_ep *ep,int packets, ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20) ++ int gfp_flags ++#else ++ gfp_t gfp_flags ++#endif ++) ++{ ++ struct usb_iso_request *pReq = NULL; ++ uint32_t req_size; ++ ++ ++ req_size = sizeof(struct usb_iso_request); ++ req_size += (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor))); ++ ++ ++ pReq = kmalloc(req_size, gfp_flags); ++ if (!pReq) { ++ DWC_WARN("%s, can't allocate Iso Request\n", __func__); ++ return 0; ++ } ++ pReq->iso_packet_desc0 = (void*) (pReq + 1); ++ ++ pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets; ++ ++ return pReq; ++} ++ ++static void dwc_otg_pcd_free_iso_request(struct usb_ep *ep, struct usb_iso_request *req) ++{ ++ kfree(req); ++} ++ ++static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = ++{ ++ .ep_ops = ++ { ++ .enable = dwc_otg_pcd_ep_enable, ++ .disable = dwc_otg_pcd_ep_disable, ++ ++ .alloc_request = dwc_otg_pcd_alloc_request, ++ .free_request = dwc_otg_pcd_free_request, ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) ++ .alloc_buffer = dwc_otg_pcd_alloc_buffer, ++ .free_buffer = dwc_otg_pcd_free_buffer, ++#endif ++ ++ .queue = dwc_otg_pcd_ep_queue, ++ .dequeue = dwc_otg_pcd_ep_dequeue, ++ ++ .set_halt = dwc_otg_pcd_ep_set_halt, ++ .fifo_status = 0, ++ .fifo_flush = 0, ++ }, ++ .iso_ep_start = dwc_otg_pcd_iso_ep_start, ++ .iso_ep_stop = dwc_otg_pcd_iso_ep_stop, ++ .alloc_iso_request = dwc_otg_pcd_alloc_iso_request, ++ .free_iso_request = dwc_otg_pcd_free_iso_request, ++}; ++ ++#else ++ ++ ++static struct usb_ep_ops dwc_otg_pcd_ep_ops = ++{ ++ .enable = dwc_otg_pcd_ep_enable, ++ .disable = dwc_otg_pcd_ep_disable, ++ ++ .alloc_request = dwc_otg_pcd_alloc_request, ++ .free_request = dwc_otg_pcd_free_request, ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,23) ++ .alloc_buffer = dwc_otg_pcd_alloc_buffer, ++ .free_buffer = dwc_otg_pcd_free_buffer, ++#endif ++ ++ .queue = dwc_otg_pcd_ep_queue, ++ .dequeue = dwc_otg_pcd_ep_dequeue, ++ ++ .set_halt = dwc_otg_pcd_ep_set_halt, ++ .fifo_status = 0, ++ .fifo_flush = 0, ++ ++ ++}; ++ ++#endif /* DWC_EN_ISOC */ ++/* Gadget Operations */ ++/** ++ * The following gadget operations will be implemented in the DWC_otg ++ * PCD. Functions in the API that are not described below are not ++ * implemented. ++ * ++ * The Gadget API provides wrapper functions for each of the function ++ * pointers defined in usb_gadget_ops. The Gadget Driver calls the ++ * wrapper function, which then calls the underlying PCD function. The ++ * following sections are named according to the wrapper functions ++ * (except for ioctl, which doesn't have a wrapper function). Within ++ * each section, the corresponding DWC_otg PCD function name is ++ * specified. ++ * ++ */ ++ ++/** ++ *Gets the USB Frame number of the last SOF. ++ */ ++static int dwc_otg_pcd_get_frame(struct usb_gadget *gadget) ++{ ++ dwc_otg_pcd_t *pcd; ++ ++ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget); ++ ++ if (gadget == 0) { ++ return -ENODEV; ++ } ++ else { ++ pcd = container_of(gadget, dwc_otg_pcd_t, gadget); ++ dwc_otg_get_frame_number(GET_CORE_IF(pcd)); ++ } ++ ++ return 0; ++} ++ ++void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd) ++{ ++ uint32_t *addr = (uint32_t *)&(GET_CORE_IF(pcd)->core_global_regs->gotgctl); ++ gotgctl_data_t mem; ++ gotgctl_data_t val; ++ ++ val.d32 = dwc_read_reg32(addr); ++ if (val.b.sesreq) { ++ DWC_ERROR("Session Request Already active!\n"); ++ return; ++ } ++ ++ DWC_NOTICE("Session Request Initated\n"); ++ mem.d32 = dwc_read_reg32(addr); ++ mem.b.sesreq = 1; ++ dwc_write_reg32(addr, mem.d32); ++ ++ /* Start the SRP timer */ ++ dwc_otg_pcd_start_srp_timer(pcd); ++ return; ++} ++ ++void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set) ++{ ++ dctl_data_t dctl = {.d32=0}; ++ volatile uint32_t *addr = &(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dctl); ++ ++ if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) { ++ if (pcd->remote_wakeup_enable) { ++ if (set) { ++ dctl.b.rmtwkupsig = 1; ++ dwc_modify_reg32(addr, 0, dctl.d32); ++ DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n"); ++ mdelay(1); ++ dwc_modify_reg32(addr, dctl.d32, 0); ++ DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n"); ++ } ++ else { ++ } ++ } ++ else { ++ DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n"); ++ } ++ } ++ return; ++} ++ ++/** ++ * Initiates Session Request Protocol (SRP) to wakeup the host if no ++ * session is in progress. If a session is already in progress, but ++ * the device is suspended, remote wakeup signaling is started. ++ * ++ */ ++static int dwc_otg_pcd_wakeup(struct usb_gadget *gadget) ++{ ++ unsigned long flags; ++ dwc_otg_pcd_t *pcd; ++ dsts_data_t dsts; ++ gotgctl_data_t gotgctl; ++ ++ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, gadget); ++ ++ if (gadget == 0) { ++ return -ENODEV; ++ } ++ else { ++ pcd = container_of(gadget, dwc_otg_pcd_t, gadget); ++ } ++ SPIN_LOCK_IRQSAVE(&pcd->lock, flags); ++ ++ /* ++ * This function starts the Protocol if no session is in progress. If ++ * a session is already in progress, but the device is suspended, ++ * remote wakeup signaling is started. ++ */ ++ ++ /* Check if valid session */ ++ gotgctl.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl)); ++ if (gotgctl.b.bsesvld) { ++ /* Check if suspend state */ ++ dsts.d32 = dwc_read_reg32(&(GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts)); ++ if (dsts.b.suspsts) { ++ dwc_otg_pcd_remote_wakeup(pcd, 1); ++ } ++ } ++ else { ++ dwc_otg_pcd_initiate_srp(pcd); ++ } ++ ++ SPIN_UNLOCK_IRQRESTORE(&pcd->lock, flags); ++ return 0; ++} ++ ++static const struct usb_gadget_ops dwc_otg_pcd_ops = ++{ ++ .get_frame = dwc_otg_pcd_get_frame, ++ .wakeup = dwc_otg_pcd_wakeup, ++ // current versions must always be self-powered ++}; ++ ++/** ++ * This function updates the otg values in the gadget structure. ++ */ ++void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *pcd, const unsigned reset) ++{ ++ ++ if (!pcd->gadget.is_otg) ++ return; ++ ++ if (reset) { ++ pcd->b_hnp_enable = 0; ++ pcd->a_hnp_support = 0; ++ pcd->a_alt_hnp_support = 0; ++ } ++ ++ pcd->gadget.b_hnp_enable = pcd->b_hnp_enable; ++ pcd->gadget.a_hnp_support = pcd->a_hnp_support; ++ pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support; ++} ++ ++/** ++ * This function is the top level PCD interrupt handler. ++ */ ++static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,19) ++ , struct pt_regs *r ++#endif ++ ) ++{ ++ dwc_otg_pcd_t *pcd = dev; ++ int32_t retval = IRQ_NONE; ++ ++ retval = dwc_otg_pcd_handle_intr(pcd); ++ return IRQ_RETVAL(retval); ++} ++ ++/** ++ * PCD Callback function for initializing the PCD when switching to ++ * device mode. ++ * ++ * @param p void pointer to the <code>dwc_otg_pcd_t</code> ++ */ ++static int32_t dwc_otg_pcd_start_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p; ++ ++ /* ++ * Initialized the Core for Device mode. ++ */ ++ if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) { ++ dwc_otg_core_dev_init(GET_CORE_IF(pcd)); ++ } ++ return 1; ++} ++ ++/** ++ * PCD Callback function for stopping the PCD when switching to Host ++ * mode. ++ * ++ * @param p void pointer to the <code>dwc_otg_pcd_t</code> ++ */ ++static int32_t dwc_otg_pcd_stop_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p; ++ extern void dwc_otg_pcd_stop(dwc_otg_pcd_t *_pcd); ++ ++ dwc_otg_pcd_stop(pcd); ++ return 1; ++} ++ ++ ++/** ++ * PCD Callback function for notifying the PCD when resuming from ++ * suspend. ++ * ++ * @param p void pointer to the <code>dwc_otg_pcd_t</code> ++ */ ++static int32_t dwc_otg_pcd_suspend_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p; ++ ++ if (pcd->driver && pcd->driver->resume) { ++ SPIN_UNLOCK(&pcd->lock); ++ pcd->driver->suspend(&pcd->gadget); ++ SPIN_LOCK(&pcd->lock); ++ } ++ ++ return 1; ++} ++ ++ ++/** ++ * PCD Callback function for notifying the PCD when resuming from ++ * suspend. ++ * ++ * @param p void pointer to the <code>dwc_otg_pcd_t</code> ++ */ ++static int32_t dwc_otg_pcd_resume_cb(void *p) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)p; ++ ++ if (pcd->driver && pcd->driver->resume) { ++ SPIN_UNLOCK(&pcd->lock); ++ pcd->driver->resume(&pcd->gadget); ++ SPIN_LOCK(&pcd->lock); ++ } ++ ++ /* Stop the SRP timeout timer. */ ++ if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS) || ++ (!GET_CORE_IF(pcd)->core_params->i2c_enable)) { ++ if (GET_CORE_IF(pcd)->srp_timer_started) { ++ GET_CORE_IF(pcd)->srp_timer_started = 0; ++ del_timer(&pcd->srp_timer); ++ } ++ } ++ return 1; ++} ++ ++ ++/** ++ * PCD Callback structure for handling mode switching. ++ */ ++static dwc_otg_cil_callbacks_t pcd_callbacks = ++{ ++ .start = dwc_otg_pcd_start_cb, ++ .stop = dwc_otg_pcd_stop_cb, ++ .suspend = dwc_otg_pcd_suspend_cb, ++ .resume_wakeup = dwc_otg_pcd_resume_cb, ++ .p = 0, /* Set at registration */ ++}; ++ ++/** ++ * This function is called when the SRP timer expires. The SRP should ++ * complete within 6 seconds. ++ */ ++static void srp_timeout(unsigned long ptr) ++{ ++ gotgctl_data_t gotgctl; ++ dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *)ptr; ++ volatile uint32_t *addr = &core_if->core_global_regs->gotgctl; ++ ++ gotgctl.d32 = dwc_read_reg32(addr); ++ ++ core_if->srp_timer_started = 0; ++ ++ if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) && ++ (core_if->core_params->i2c_enable)) { ++ DWC_PRINT("SRP Timeout\n"); ++ ++ if ((core_if->srp_success) && ++ (gotgctl.b.bsesvld)) { ++ if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) { ++ core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p); ++ } ++ ++ /* Clear Session Request */ ++ gotgctl.d32 = 0; ++ gotgctl.b.sesreq = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gotgctl, ++ gotgctl.d32, 0); ++ ++ core_if->srp_success = 0; ++ } ++ else { ++ DWC_ERROR("Device not connected/responding\n"); ++ gotgctl.b.sesreq = 0; ++ dwc_write_reg32(addr, gotgctl.d32); ++ } ++ } ++ else if (gotgctl.b.sesreq) { ++ DWC_PRINT("SRP Timeout\n"); ++ ++ DWC_ERROR("Device not connected/responding\n"); ++ gotgctl.b.sesreq = 0; ++ dwc_write_reg32(addr, gotgctl.d32); ++ } ++ else { ++ DWC_PRINT(" SRP GOTGCTL=%0x\n", gotgctl.d32); ++ } ++} ++ ++/** ++ * Start the SRP timer to detect when the SRP does not complete within ++ * 6 seconds. ++ * ++ * @param pcd the pcd structure. ++ */ ++void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd) ++{ ++ struct timer_list *srp_timer = &pcd->srp_timer; ++ GET_CORE_IF(pcd)->srp_timer_started = 1; ++ init_timer(srp_timer); ++ srp_timer->function = srp_timeout; ++ srp_timer->data = (unsigned long)GET_CORE_IF(pcd); ++ srp_timer->expires = jiffies + (HZ*6); ++ add_timer(srp_timer); ++} ++ ++/** ++ * Tasklet ++ * ++ */ ++extern void start_next_request(dwc_otg_pcd_ep_t *ep); ++ ++static void start_xfer_tasklet_func (unsigned long data) ++{ ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t*)data; ++ dwc_otg_core_if_t *core_if = pcd->otg_dev->core_if; ++ ++ int i; ++ depctl_data_t diepctl; ++ ++ DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n"); ++ ++ diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->diepctl); ++ ++ if (pcd->ep0.queue_sof) { ++ pcd->ep0.queue_sof = 0; ++ start_next_request (&pcd->ep0); ++ // break; ++ } ++ ++ for (i=0; i<core_if->dev_if->num_in_eps; i++) ++ { ++ depctl_data_t diepctl; ++ diepctl.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[i]->diepctl); ++ ++ if (pcd->in_ep[i].queue_sof) { ++ pcd->in_ep[i].queue_sof = 0; ++ start_next_request (&pcd->in_ep[i]); ++ // break; ++ } ++ } ++ ++ return; ++} ++ ++ ++ ++ ++ ++ ++ ++static struct tasklet_struct start_xfer_tasklet = { ++ .next = NULL, ++ .state = 0, ++ .count = ATOMIC_INIT(0), ++ .func = start_xfer_tasklet_func, ++ .data = 0, ++}; ++/** ++ * This function initialized the pcd Dp structures to there default ++ * state. ++ * ++ * @param pcd the pcd structure. ++ */ ++void dwc_otg_pcd_reinit(dwc_otg_pcd_t *pcd) ++{ ++ static const char * names[] = ++ { ++ ++ "ep0", ++ "ep1in", ++ "ep2in", ++ "ep3in", ++ "ep4in", ++ "ep5in", ++ "ep6in", ++ "ep7in", ++ "ep8in", ++ "ep9in", ++ "ep10in", ++ "ep11in", ++ "ep12in", ++ "ep13in", ++ "ep14in", ++ "ep15in", ++ "ep1out", ++ "ep2out", ++ "ep3out", ++ "ep4out", ++ "ep5out", ++ "ep6out", ++ "ep7out", ++ "ep8out", ++ "ep9out", ++ "ep10out", ++ "ep11out", ++ "ep12out", ++ "ep13out", ++ "ep14out", ++ "ep15out" ++ ++ }; ++ ++ int i; ++ int in_ep_cntr, out_ep_cntr; ++ uint32_t hwcfg1; ++ uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps; ++ uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps; ++ dwc_otg_pcd_ep_t *ep; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd); ++ ++ INIT_LIST_HEAD (&pcd->gadget.ep_list); ++ pcd->gadget.ep0 = &pcd->ep0.ep; ++ pcd->gadget.speed = USB_SPEED_UNKNOWN; ++ ++ INIT_LIST_HEAD (&pcd->gadget.ep0->ep_list); ++ ++ /** ++ * Initialize the EP0 structure. ++ */ ++ ep = &pcd->ep0; ++ ++ /* Init EP structure */ ++ ep->desc = 0; ++ ep->pcd = pcd; ++ ep->stopped = 1; ++ ++ /* Init DWC ep structure */ ++ ep->dwc_ep.num = 0; ++ ep->dwc_ep.active = 0; ++ ep->dwc_ep.tx_fifo_num = 0; ++ /* Control until ep is actvated */ ++ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; ++ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; ++ ep->dwc_ep.dma_addr = 0; ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = 0; ++ ep->queue_sof = 0; ++ ep->dwc_ep.desc_addr = 0; ++ ep->dwc_ep.dma_desc_addr = 0; ++ ++ ++ /* Init the usb_ep structure. */ ++ ep->ep.name = names[0]; ++ ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->ep.maxpacket = MAX_PACKET_SIZE; ++ ++ list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list); ++ ++ INIT_LIST_HEAD (&ep->queue); ++ /** ++ * Initialize the EP structures. ++ */ ++ in_ep_cntr = 0; ++ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3; ++ ++ for (i = 1; in_ep_cntr < num_in_eps; i++) ++ { ++ if((hwcfg1 & 0x1) == 0) { ++ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr]; ++ in_ep_cntr ++; ++ ++ /* Init EP structure */ ++ ep->desc = 0; ++ ep->pcd = pcd; ++ ep->stopped = 1; ++ ++ /* Init DWC ep structure */ ++ ep->dwc_ep.is_in = 1; ++ ep->dwc_ep.num = i; ++ ep->dwc_ep.active = 0; ++ ep->dwc_ep.tx_fifo_num = 0; ++ ++ /* Control until ep is actvated */ ++ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; ++ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; ++ ep->dwc_ep.dma_addr = 0; ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = 0; ++ ep->queue_sof = 0; ++ ep->dwc_ep.desc_addr = 0; ++ ep->dwc_ep.dma_desc_addr = 0; ++ ++ /* Init the usb_ep structure. */ ++ ep->ep.name = names[i]; ++ ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops; ++ ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->ep.maxpacket = MAX_PACKET_SIZE; ++ ++ list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list); ++ ++ INIT_LIST_HEAD (&ep->queue); ++ } ++ hwcfg1 >>= 2; ++ } ++ ++ out_ep_cntr = 0; ++ hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2; ++ ++ for (i = 1; out_ep_cntr < num_out_eps; i++) ++ { ++ if((hwcfg1 & 0x1) == 0) { ++ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr]; ++ out_ep_cntr++; ++ ++ /* Init EP structure */ ++ ep->desc = 0; ++ ep->pcd = pcd; ++ ep->stopped = 1; ++ ++ /* Init DWC ep structure */ ++ ep->dwc_ep.is_in = 0; ++ ep->dwc_ep.num = i; ++ ep->dwc_ep.active = 0; ++ ep->dwc_ep.tx_fifo_num = 0; ++ /* Control until ep is actvated */ ++ ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; ++ ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; ++ ep->dwc_ep.dma_addr = 0; ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = 0; ++ ep->queue_sof = 0; ++ ++ /* Init the usb_ep structure. */ ++ ep->ep.name = names[15 + i]; ++ ep->ep.ops = (struct usb_ep_ops*)&dwc_otg_pcd_ep_ops; ++ /** ++ * @todo NGS: What should the max packet size be set to ++ * here? Before EP type is set? ++ */ ++ ep->ep.maxpacket = MAX_PACKET_SIZE; ++ ++ list_add_tail (&ep->ep.ep_list, &pcd->gadget.ep_list); ++ ++ INIT_LIST_HEAD (&ep->queue); ++ } ++ hwcfg1 >>= 2; ++ } ++ ++ /* remove ep0 from the list. There is a ep0 pointer.*/ ++ list_del_init (&pcd->ep0.ep.ep_list); ++ ++ pcd->ep0state = EP0_DISCONNECT; ++ pcd->ep0.ep.maxpacket = MAX_EP0_SIZE; ++ pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE; ++ pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; ++} ++ ++/** ++ * This function releases the Gadget device. ++ * required by device_unregister(). ++ * ++ * @todo Should this do something? Should it free the PCD? ++ */ ++static void dwc_otg_pcd_gadget_release(struct device *dev) ++{ ++ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, dev); ++} ++ ++ ++ ++/** ++ * This function initialized the PCD portion of the driver. ++ * ++ */ ++ ++int dwc_otg_pcd_init(struct device *dev) ++{ ++ static char pcd_name[] = "dwc_otg_pcd"; ++ dwc_otg_pcd_t *pcd; ++ dwc_otg_core_if_t* core_if; ++ dwc_otg_dev_if_t* dev_if; ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(dev); ++ int retval = 0; ++ ++ ++ DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n",__func__, dev); ++ /* ++ * Allocate PCD structure ++ */ ++ pcd = kmalloc(sizeof(dwc_otg_pcd_t), GFP_KERNEL); ++ ++ if (pcd == 0) { ++ return -ENOMEM; ++ } ++ ++ memset(pcd, 0, sizeof(dwc_otg_pcd_t)); ++ spin_lock_init(&pcd->lock); ++ ++ otg_dev->pcd = pcd; ++ s_pcd = pcd; ++ pcd->gadget.name = pcd_name; ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) ++ strcpy(pcd->gadget.dev.bus_id, "gadget"); ++#else ++ dev_set_name(&pcd->gadget.dev, "%s", "gadget"); ++#endif ++ ++ pcd->otg_dev = dev_get_drvdata(dev); ++ ++ pcd->gadget.dev.parent = dev; ++ pcd->gadget.dev.release = dwc_otg_pcd_gadget_release; ++ pcd->gadget.ops = &dwc_otg_pcd_ops; ++ ++ core_if = GET_CORE_IF(pcd); ++ dev_if = core_if->dev_if; ++ ++ if(core_if->hwcfg4.b.ded_fifo_en) { ++ DWC_PRINT("Dedicated Tx FIFOs mode\n"); ++ } ++ else { ++ DWC_PRINT("Shared Tx FIFO mode\n"); ++ } ++ ++ /* If the module is set to FS or if the PHY_TYPE is FS then the gadget ++ * should not report as dual-speed capable. replace the following line ++ * with the block of code below it once the software is debugged for ++ * this. If is_dualspeed = 0 then the gadget driver should not report ++ * a device qualifier descriptor when queried. */ ++ if ((GET_CORE_IF(pcd)->core_params->speed == DWC_SPEED_PARAM_FULL) || ++ ((GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == 2) && ++ (GET_CORE_IF(pcd)->hwcfg2.b.fs_phy_type == 1) && ++ (GET_CORE_IF(pcd)->core_params->ulpi_fs_ls))) { ++ pcd->gadget.is_dualspeed = 0; ++ } ++ else { ++ pcd->gadget.is_dualspeed = 1; ++ } ++ ++ if ((otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE) || ++ (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST) || ++ (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) || ++ (otg_dev->core_if->hwcfg2.b.op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) { ++ pcd->gadget.is_otg = 0; ++ } ++ else { ++ pcd->gadget.is_otg = 1; ++ } ++ ++ ++ pcd->driver = 0; ++ /* Register the gadget device */ ++ retval = device_register(&pcd->gadget.dev); ++ if (retval != 0) { ++ kfree (pcd); ++ return retval; ++ } ++ ++ ++ /* ++ * Initialized the Core for Device mode. ++ */ ++ if (dwc_otg_is_device_mode(core_if)) { ++ dwc_otg_core_dev_init(core_if); ++ } ++ ++ /* ++ * Initialize EP structures ++ */ ++ dwc_otg_pcd_reinit(pcd); ++ ++ /* ++ * Register the PCD Callbacks. ++ */ ++ dwc_otg_cil_register_pcd_callbacks(otg_dev->core_if, &pcd_callbacks, ++ pcd); ++ /* ++ * Setup interupt handler ++ */ ++ DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n", otg_dev->irq); ++ retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq, ++ IRQF_SHARED, pcd->gadget.name, pcd); ++ if (retval != 0) { ++ DWC_ERROR("request of irq%d failed\n", otg_dev->irq); ++ device_unregister(&pcd->gadget.dev); ++ kfree (pcd); ++ return -EBUSY; ++ } ++ ++ /* ++ * Initialize the DMA buffer for SETUP packets ++ */ ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ pcd->setup_pkt = dma_alloc_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, &pcd->setup_pkt_dma_handle, 0); ++ if (pcd->setup_pkt == 0) { ++ free_irq(otg_dev->irq, pcd); ++ device_unregister(&pcd->gadget.dev); ++ kfree (pcd); ++ return -ENOMEM; ++ } ++ ++ pcd->status_buf = dma_alloc_coherent (NULL, sizeof (uint16_t), &pcd->status_buf_dma_handle, 0); ++ if (pcd->status_buf == 0) { ++ dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle); ++ free_irq(otg_dev->irq, pcd); ++ device_unregister(&pcd->gadget.dev); ++ kfree (pcd); ++ return -ENOMEM; ++ } ++ ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ dev_if->setup_desc_addr[0] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[0], 1); ++ dev_if->setup_desc_addr[1] = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_setup_desc_addr[1], 1); ++ dev_if->in_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_in_desc_addr, 1); ++ dev_if->out_desc_addr = dwc_otg_ep_alloc_desc_chain(&dev_if->dma_out_desc_addr, 1); ++ ++ if(dev_if->setup_desc_addr[0] == 0 ++ || dev_if->setup_desc_addr[1] == 0 ++ || dev_if->in_desc_addr == 0 ++ || dev_if->out_desc_addr == 0 ) { ++ ++ if(dev_if->out_desc_addr) ++ dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1); ++ if(dev_if->in_desc_addr) ++ dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1); ++ if(dev_if->setup_desc_addr[1]) ++ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1); ++ if(dev_if->setup_desc_addr[0]) ++ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1); ++ ++ ++ dma_free_coherent(NULL, sizeof(*pcd->status_buf), pcd->status_buf, pcd->setup_pkt_dma_handle); ++ dma_free_coherent(NULL, sizeof(*pcd->setup_pkt), pcd->setup_pkt, pcd->setup_pkt_dma_handle); ++ ++ free_irq(otg_dev->irq, pcd); ++ device_unregister(&pcd->gadget.dev); ++ kfree (pcd); ++ ++ return -ENOMEM; ++ } ++ } ++ } ++ else { ++ pcd->setup_pkt = kmalloc (sizeof (*pcd->setup_pkt) * 5, GFP_KERNEL); ++ if (pcd->setup_pkt == 0) { ++ free_irq(otg_dev->irq, pcd); ++ device_unregister(&pcd->gadget.dev); ++ kfree (pcd); ++ return -ENOMEM; ++ } ++ ++ pcd->status_buf = kmalloc (sizeof (uint16_t), GFP_KERNEL); ++ if (pcd->status_buf == 0) { ++ kfree(pcd->setup_pkt); ++ free_irq(otg_dev->irq, pcd); ++ device_unregister(&pcd->gadget.dev); ++ kfree (pcd); ++ return -ENOMEM; ++ } ++ } ++ ++ ++ /* Initialize tasklet */ ++ start_xfer_tasklet.data = (unsigned long)pcd; ++ pcd->start_xfer_tasklet = &start_xfer_tasklet; ++ ++ return 0; ++} ++ ++/** ++ * Cleanup the PCD. ++ */ ++void dwc_otg_pcd_remove(struct device *dev) ++{ ++ dwc_otg_device_t *otg_dev = dev_get_drvdata(dev); ++ dwc_otg_pcd_t *pcd = otg_dev->pcd; ++ dwc_otg_dev_if_t* dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev); ++ ++ /* ++ * Free the IRQ ++ */ ++ free_irq(otg_dev->irq, pcd); ++ ++ /* start with the driver above us */ ++ if (pcd->driver) { ++ /* should have been done already by driver model core */ ++ DWC_WARN("driver '%s' is still registered\n", ++ pcd->driver->driver.name); ++ usb_gadget_unregister_driver(pcd->driver); ++ } ++ device_unregister(&pcd->gadget.dev); ++ ++ if (GET_CORE_IF(pcd)->dma_enable) { ++ dma_free_coherent (NULL, sizeof (*pcd->setup_pkt) * 5, pcd->setup_pkt, pcd->setup_pkt_dma_handle); ++ dma_free_coherent (NULL, sizeof (uint16_t), pcd->status_buf, pcd->status_buf_dma_handle); ++ if (GET_CORE_IF(pcd)->dma_desc_enable) { ++ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0], dev_if->dma_setup_desc_addr[0], 1); ++ dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1], dev_if->dma_setup_desc_addr[1], 1); ++ dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr, dev_if->dma_in_desc_addr, 1); ++ dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr, dev_if->dma_out_desc_addr, 1); ++ } ++ } ++ else { ++ kfree (pcd->setup_pkt); ++ kfree (pcd->status_buf); ++ } ++ ++ kfree(pcd); ++ otg_dev->pcd = 0; ++} ++ ++/** ++ * This function registers a gadget driver with the PCD. ++ * ++ * When a driver is successfully registered, it will receive control ++ * requests including set_configuration(), which enables non-control ++ * requests. then usb traffic follows until a disconnect is reported. ++ * then a host may connect again, or the driver might get unbound. ++ * ++ * @param driver The driver being registered ++ */ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37) ++int usb_gadget_probe_driver(struct usb_gadget_driver *driver, int (*bind)(struct usb_gadget *)) ++#else ++int usb_gadget_register_driver(struct usb_gadget_driver *driver) ++#endif ++{ ++ int retval; ++ int (*d_bind)(struct usb_gadget *); ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37) ++ d_bind = bind; ++#else ++ d_bind = driver->bind; ++#endif ++ ++ DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n", driver->driver.name); ++ ++ if (!driver || driver->speed == USB_SPEED_UNKNOWN || ++ !d_bind || ++ !driver->unbind || ++ !driver->disconnect || ++ !driver->setup) { ++ DWC_DEBUGPL(DBG_PCDV,"EINVAL\n"); ++ return -EINVAL; ++ } ++ if (s_pcd == 0) { ++ DWC_DEBUGPL(DBG_PCDV,"ENODEV\n"); ++ return -ENODEV; ++ } ++ if (s_pcd->driver != 0) { ++ DWC_DEBUGPL(DBG_PCDV,"EBUSY (%p)\n", s_pcd->driver); ++ return -EBUSY; ++ } ++ ++ /* hook up the driver */ ++ s_pcd->driver = driver; ++ s_pcd->gadget.dev.driver = &driver->driver; ++ ++ DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name); ++ retval = d_bind(&s_pcd->gadget); ++ if (retval) { ++ DWC_ERROR("bind to driver %s --> error %d\n", ++ driver->driver.name, retval); ++ s_pcd->driver = 0; ++ s_pcd->gadget.dev.driver = 0; ++ return retval; ++ } ++ DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n", ++ driver->driver.name); ++ return 0; ++} ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37) ++EXPORT_SYMBOL(usb_gadget_probe_driver); ++#else ++EXPORT_SYMBOL(usb_gadget_register_driver); ++#endif ++ ++/** ++ * This function unregisters a gadget driver ++ * ++ * @param driver The driver being unregistered ++ */ ++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) ++{ ++ //DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver); ++ ++ if (s_pcd == 0) { ++ DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__, ++ -ENODEV); ++ return -ENODEV; ++ } ++ if (driver == 0 || driver != s_pcd->driver) { ++ DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__, ++ -EINVAL); ++ return -EINVAL; ++ } ++ ++ driver->unbind(&s_pcd->gadget); ++ s_pcd->driver = 0; ++ ++ DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n", ++ driver->driver.name); ++ return 0; ++} ++EXPORT_SYMBOL(usb_gadget_unregister_driver); ++ ++#endif /* DWC_HOST_ONLY */ +diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd.h b/drivers/usb/dwc_otg/dwc_otg_pcd.h +new file mode 100644 +index 0000000..48de957 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_pcd.h +@@ -0,0 +1,248 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $ ++ * $Revision: 1.2 $ ++ * $Date: 2008-11-21 05:39:15 $ ++ * $Change: 1103515 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++#if !defined(__DWC_PCD_H__) ++#define __DWC_PCD_H__ ++ ++#include <linux/types.h> ++#include <linux/list.h> ++#include <linux/errno.h> ++#include <linux/device.h> ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21) ++# include <linux/usb/ch9.h> ++#else ++# include <linux/usb_ch9.h> ++#endif ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24) ++#include <linux/usb/gadget.h> ++#else ++#include <linux/usb_gadget.h> ++#endif ++#include <linux/interrupt.h> ++#include <linux/dma-mapping.h> ++ ++struct dwc_otg_device; ++ ++#include "dwc_otg_cil.h" ++ ++/** ++ * @file ++ * ++ * This file contains the structures, constants, and interfaces for ++ * the Perpherial Contoller Driver (PCD). ++ * ++ * The Peripheral Controller Driver (PCD) for Linux will implement the ++ * Gadget API, so that the existing Gadget drivers can be used. For ++ * the Mass Storage Function driver the File-backed USB Storage Gadget ++ * (FBS) driver will be used. The FBS driver supports the ++ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only ++ * transports. ++ * ++ */ ++ ++/** Invalid DMA Address */ ++#define DMA_ADDR_INVALID (~(dma_addr_t)0) ++/** Maxpacket size for EP0 */ ++#define MAX_EP0_SIZE 64 ++/** Maxpacket size for any EP */ ++#define MAX_PACKET_SIZE 1024 ++ ++/** Max Transfer size for any EP */ ++#define MAX_TRANSFER_SIZE 65535 ++ ++/** Max DMA Descriptor count for any EP */ ++#define MAX_DMA_DESC_CNT 64 ++ ++/** ++ * Get the pointer to the core_if from the pcd pointer. ++ */ ++#define GET_CORE_IF( _pcd ) (_pcd->otg_dev->core_if) ++ ++/** ++ * States of EP0. ++ */ ++typedef enum ep0_state ++{ ++ EP0_DISCONNECT, /* no host */ ++ EP0_IDLE, ++ EP0_IN_DATA_PHASE, ++ EP0_OUT_DATA_PHASE, ++ EP0_IN_STATUS_PHASE, ++ EP0_OUT_STATUS_PHASE, ++ EP0_STALL, ++} ep0state_e; ++ ++/** Fordward declaration.*/ ++struct dwc_otg_pcd; ++ ++/** DWC_otg iso request structure. ++ * ++ */ ++typedef struct usb_iso_request dwc_otg_pcd_iso_request_t; ++ ++/** PCD EP structure. ++ * This structure describes an EP, there is an array of EPs in the PCD ++ * structure. ++ */ ++typedef struct dwc_otg_pcd_ep ++{ ++ /** USB EP data */ ++ struct usb_ep ep; ++ /** USB EP Descriptor */ ++ const struct usb_endpoint_descriptor *desc; ++ ++ /** queue of dwc_otg_pcd_requests. */ ++ struct list_head queue; ++ unsigned stopped : 1; ++ unsigned disabling : 1; ++ unsigned dma : 1; ++ unsigned queue_sof : 1; ++ ++#ifdef DWC_EN_ISOC ++ /** DWC_otg Isochronous Transfer */ ++ struct usb_iso_request* iso_req; ++#endif //DWC_EN_ISOC ++ ++ /** DWC_otg ep data. */ ++ dwc_ep_t dwc_ep; ++ ++ /** Pointer to PCD */ ++ struct dwc_otg_pcd *pcd; ++}dwc_otg_pcd_ep_t; ++ ++ ++ ++/** DWC_otg PCD Structure. ++ * This structure encapsulates the data for the dwc_otg PCD. ++ */ ++typedef struct dwc_otg_pcd ++{ ++ /** USB gadget */ ++ struct usb_gadget gadget; ++ /** USB gadget driver pointer*/ ++ struct usb_gadget_driver *driver; ++ /** The DWC otg device pointer. */ ++ struct dwc_otg_device *otg_dev; ++ ++ /** State of EP0 */ ++ ep0state_e ep0state; ++ /** EP0 Request is pending */ ++ unsigned ep0_pending : 1; ++ /** Indicates when SET CONFIGURATION Request is in process */ ++ unsigned request_config : 1; ++ /** The state of the Remote Wakeup Enable. */ ++ unsigned remote_wakeup_enable : 1; ++ /** The state of the B-Device HNP Enable. */ ++ unsigned b_hnp_enable : 1; ++ /** The state of A-Device HNP Support. */ ++ unsigned a_hnp_support : 1; ++ /** The state of the A-Device Alt HNP support. */ ++ unsigned a_alt_hnp_support : 1; ++ /** Count of pending Requests */ ++ unsigned request_pending; ++ ++ /** SETUP packet for EP0 ++ * This structure is allocated as a DMA buffer on PCD initialization ++ * with enough space for up to 3 setup packets. ++ */ ++ union ++ { ++ struct usb_ctrlrequest req; ++ uint32_t d32[2]; ++ } *setup_pkt; ++ ++ dma_addr_t setup_pkt_dma_handle; ++ ++ /** 2-byte dma buffer used to return status from GET_STATUS */ ++ uint16_t *status_buf; ++ dma_addr_t status_buf_dma_handle; ++ ++ /** EP0 */ ++ dwc_otg_pcd_ep_t ep0; ++ ++ /** Array of IN EPs. */ ++ dwc_otg_pcd_ep_t in_ep[ MAX_EPS_CHANNELS - 1]; ++ /** Array of OUT EPs. */ ++ dwc_otg_pcd_ep_t out_ep[ MAX_EPS_CHANNELS - 1]; ++ /** number of valid EPs in the above array. */ ++// unsigned num_eps : 4; ++ spinlock_t lock; ++ /** Timer for SRP. If it expires before SRP is successful ++ * clear the SRP. */ ++ struct timer_list srp_timer; ++ ++ /** Tasklet to defer starting of TEST mode transmissions until ++ * Status Phase has been completed. ++ */ ++ struct tasklet_struct test_mode_tasklet; ++ ++ /** Tasklet to delay starting of xfer in DMA mode */ ++ struct tasklet_struct *start_xfer_tasklet; ++ ++ /** The test mode to enter when the tasklet is executed. */ ++ unsigned test_mode; ++ ++} dwc_otg_pcd_t; ++ ++ ++/** DWC_otg request structure. ++ * This structure is a list of requests. ++ */ ++typedef struct ++{ ++ struct usb_request req; /**< USB Request. */ ++ struct list_head queue; /**< queue of these requests. */ ++} dwc_otg_pcd_request_t; ++ ++ ++extern int dwc_otg_pcd_init(struct device *dev); ++ ++//extern void dwc_otg_pcd_remove( struct dwc_otg_device *_otg_dev ); ++extern void dwc_otg_pcd_remove( struct device *dev); ++extern int32_t dwc_otg_pcd_handle_intr( dwc_otg_pcd_t *pcd ); ++extern void dwc_otg_pcd_start_srp_timer(dwc_otg_pcd_t *pcd ); ++ ++extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t *pcd); ++extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t *pcd, int set); ++ ++extern void dwc_otg_iso_buffer_done(dwc_otg_pcd_ep_t *ep, dwc_otg_pcd_iso_request_t *req); ++extern void dwc_otg_request_done(dwc_otg_pcd_ep_t *_ep, dwc_otg_pcd_request_t *req, ++ int status); ++extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t *_ep); ++extern void dwc_otg_pcd_update_otg(dwc_otg_pcd_t *_pcd, ++ const unsigned reset); ++ ++#endif ++#endif /* DWC_HOST_ONLY */ +diff --git a/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c b/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c +new file mode 100644 +index 0000000..fd44fd8 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_pcd_intr.c +@@ -0,0 +1,3654 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $ ++ * $Revision: 1.2 $ ++ * $Date: 2008-11-21 05:39:15 $ ++ * $Change: 1115682 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++#ifndef DWC_HOST_ONLY ++#include <linux/interrupt.h> ++#include <linux/dma-mapping.h> ++#include <linux/version.h> ++ ++#include "dwc_otg_driver.h" ++#include "dwc_otg_pcd.h" ++ ++ ++#define DEBUG_EP0 ++ ++/* request functions defined in "dwc_otg_pcd.c" */ ++ ++/** @file ++ * This file contains the implementation of the PCD Interrupt handlers. ++ * ++ * The PCD handles the device interrupts. Many conditions can cause a ++ * device interrupt. When an interrupt occurs, the device interrupt ++ * service routine determines the cause of the interrupt and ++ * dispatches handling to the appropriate function. These interrupt ++ * handling functions are described below. ++ * All interrupt registers are processed from LSB to MSB. ++ */ ++ ++ ++/** ++ * This function prints the ep0 state for debug purposes. ++ */ ++static inline void print_ep0_state(dwc_otg_pcd_t *pcd) ++{ ++#ifdef DEBUG ++ char str[40]; ++ ++ switch (pcd->ep0state) { ++ case EP0_DISCONNECT: ++ strcpy(str, "EP0_DISCONNECT"); ++ break; ++ case EP0_IDLE: ++ strcpy(str, "EP0_IDLE"); ++ break; ++ case EP0_IN_DATA_PHASE: ++ strcpy(str, "EP0_IN_DATA_PHASE"); ++ break; ++ case EP0_OUT_DATA_PHASE: ++ strcpy(str, "EP0_OUT_DATA_PHASE"); ++ break; ++ case EP0_IN_STATUS_PHASE: ++ strcpy(str,"EP0_IN_STATUS_PHASE"); ++ break; ++ case EP0_OUT_STATUS_PHASE: ++ strcpy(str,"EP0_OUT_STATUS_PHASE"); ++ break; ++ case EP0_STALL: ++ strcpy(str,"EP0_STALL"); ++ break; ++ default: ++ strcpy(str,"EP0_INVALID"); ++ } ++ ++ DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state); ++#endif ++} ++ ++/** ++ * This function returns pointer to in ep struct with number ep_num ++ */ ++static inline dwc_otg_pcd_ep_t* get_in_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num) ++{ ++ int i; ++ int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; ++ if(ep_num == 0) { ++ return &pcd->ep0; ++ } ++ else { ++ for(i = 0; i < num_in_eps; ++i) ++ { ++ if(pcd->in_ep[i].dwc_ep.num == ep_num) ++ return &pcd->in_ep[i]; ++ } ++ return 0; ++ } ++} ++/** ++ * This function returns pointer to out ep struct with number ep_num ++ */ ++static inline dwc_otg_pcd_ep_t* get_out_ep(dwc_otg_pcd_t *pcd, uint32_t ep_num) ++{ ++ int i; ++ int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; ++ if(ep_num == 0) { ++ return &pcd->ep0; ++ } ++ else { ++ for(i = 0; i < num_out_eps; ++i) ++ { ++ if(pcd->out_ep[i].dwc_ep.num == ep_num) ++ return &pcd->out_ep[i]; ++ } ++ return 0; ++ } ++} ++/** ++ * This functions gets a pointer to an EP from the wIndex address ++ * value of the control request. ++ */ ++static dwc_otg_pcd_ep_t *get_ep_by_addr (dwc_otg_pcd_t *pcd, u16 wIndex) ++{ ++ dwc_otg_pcd_ep_t *ep; ++ ++ if ((wIndex & USB_ENDPOINT_NUMBER_MASK) == 0) ++ return &pcd->ep0; ++ list_for_each_entry(ep, &pcd->gadget.ep_list, ep.ep_list) ++ { ++ u8 bEndpointAddress; ++ ++ if (!ep->desc) ++ continue; ++ ++ bEndpointAddress = ep->desc->bEndpointAddress; ++ if((wIndex & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK)) ++ == (bEndpointAddress & (USB_DIR_IN | USB_ENDPOINT_NUMBER_MASK))) ++ return ep; ++ } ++ return NULL; ++} ++ ++/** ++ * This function checks the EP request queue, if the queue is not ++ * empty the next request is started. ++ */ ++void start_next_request(dwc_otg_pcd_ep_t *ep) ++{ ++ dwc_otg_pcd_request_t *req = 0; ++ uint32_t max_transfer = GET_CORE_IF(ep->pcd)->core_params->max_transfer_size; ++ ++ if (!list_empty(&ep->queue)) { ++ req = list_entry(ep->queue.next, ++ dwc_otg_pcd_request_t, queue); ++ ++ /* Setup and start the Transfer */ ++ ep->dwc_ep.dma_addr = req->req.dma; ++ ep->dwc_ep.start_xfer_buff = req->req.buf; ++ ep->dwc_ep.xfer_buff = req->req.buf; ++ ep->dwc_ep.sent_zlp = 0; ++ ep->dwc_ep.total_len = req->req.length; ++ ep->dwc_ep.xfer_len = 0; ++ ep->dwc_ep.xfer_count = 0; ++ ++ if(max_transfer > MAX_TRANSFER_SIZE) { ++ ep->dwc_ep.maxxfer = max_transfer - (max_transfer % ep->dwc_ep.maxpacket); ++ } else { ++ ep->dwc_ep.maxxfer = max_transfer; ++ } ++ ++ if(req->req.zero) { ++ if((ep->dwc_ep.total_len % ep->dwc_ep.maxpacket == 0) ++ && (ep->dwc_ep.total_len != 0)) { ++ ep->dwc_ep.sent_zlp = 1; ++ } ++ ++ } ++ ++ dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep); ++ } ++} ++ ++/** ++ * This function handles the SOF Interrupts. At this time the SOF ++ * Interrupt is disabled. ++ */ ++int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ ++ gintsts_data_t gintsts; ++ ++ DWC_DEBUGPL(DBG_PCD, "SOF\n"); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.sofintr = 1; ++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++ ++/** ++ * This function handles the Rx Status Queue Level Interrupt, which ++ * indicates that there is a least one packet in the Rx FIFO. The ++ * packets are moved from the FIFO to memory, where they will be ++ * processed when the Endpoint Interrupt Register indicates Transfer ++ * Complete or SETUP Phase Done. ++ * ++ * Repeat the following until the Rx Status Queue is empty: ++ * -# Read the Receive Status Pop Register (GRXSTSP) to get Packet ++ * info ++ * -# If Receive FIFO is empty then skip to step Clear the interrupt ++ * and exit ++ * -# If SETUP Packet call dwc_otg_read_setup_packet to copy the ++ * SETUP data to the buffer ++ * -# If OUT Data Packet call dwc_otg_read_packet to copy the data ++ * to the destination buffer ++ */ ++int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs; ++ gintmsk_data_t gintmask = {.d32=0}; ++ device_grxsts_data_t status; ++ dwc_otg_pcd_ep_t *ep; ++ gintsts_data_t gintsts; ++#ifdef DEBUG ++ static char *dpid_str[] ={ "D0", "D2", "D1", "MDATA" }; ++#endif ++ ++ //DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd); ++ /* Disable the Rx Status Queue Level interrupt */ ++ gintmask.b.rxstsqlvl= 1; ++ dwc_modify_reg32(&global_regs->gintmsk, gintmask.d32, 0); ++ ++ /* Get the Status from the top of the FIFO */ ++ status.d32 = dwc_read_reg32(&global_regs->grxstsp); ++ ++ DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s " ++ "pktsts:%x Frame:%d(0x%0x)\n", ++ status.b.epnum, status.b.bcnt, ++ dpid_str[status.b.dpid], ++ status.b.pktsts, status.b.fn, status.b.fn); ++ /* Get pointer to EP structure */ ++ ep = get_out_ep(pcd, status.b.epnum); ++ ++ switch (status.b.pktsts) { ++ case DWC_DSTS_GOUT_NAK: ++ DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n"); ++ break; ++ case DWC_STS_DATA_UPDT: ++ DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n"); ++ if (status.b.bcnt && ep->dwc_ep.xfer_buff) { ++ /** @todo NGS Check for buffer overflow? */ ++ dwc_otg_read_packet(core_if, ++ ep->dwc_ep.xfer_buff, ++ status.b.bcnt); ++ ep->dwc_ep.xfer_count += status.b.bcnt; ++ ep->dwc_ep.xfer_buff += status.b.bcnt; ++ } ++ break; ++ case DWC_STS_XFER_COMP: ++ DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n"); ++ break; ++ case DWC_DSTS_SETUP_COMP: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n"); ++#endif ++ break; ++case DWC_DSTS_SETUP_UPDT: ++ dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32); ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, ++ "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n", ++ pcd->setup_pkt->req.bRequestType, ++ pcd->setup_pkt->req.bRequest, ++ pcd->setup_pkt->req.wValue, ++ pcd->setup_pkt->req.wIndex, ++ pcd->setup_pkt->req.wLength); ++#endif ++ ep->dwc_ep.xfer_count += status.b.bcnt; ++ break; ++ default: ++ DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n", ++ status.b.pktsts); ++ break; ++ } ++ ++ /* Enable the Rx Status Queue Level interrupt */ ++ dwc_modify_reg32(&global_regs->gintmsk, 0, gintmask.d32); ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.rxstsqlvl = 1; ++ dwc_write_reg32 (&global_regs->gintsts, gintsts.d32); ++ ++ //DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__); ++ return 1; ++} ++/** ++ * This function examines the Device IN Token Learning Queue to ++ * determine the EP number of the last IN token received. This ++ * implementation is for the Mass Storage device where there are only ++ * 2 IN EPs (Control-IN and BULK-IN). ++ * ++ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there ++ * are 8 EP Numbers in each of the other possible DTKNQ Registers. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * ++ */ ++static inline int get_ep_of_last_in_token(dwc_otg_core_if_t *core_if) ++{ ++ dwc_otg_device_global_regs_t *dev_global_regs = ++ core_if->dev_if->dev_global_regs; ++ const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth; ++ /* Number of Token Queue Registers */ ++ const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8; ++ dtknq1_data_t dtknqr1; ++ uint32_t in_tkn_epnums[4]; ++ int ndx = 0; ++ int i = 0; ++ volatile uint32_t *addr = &dev_global_regs->dtknqr1; ++ int epnum = 0; ++ ++ //DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH); ++ ++ ++ /* Read the DTKNQ Registers */ ++ for (i = 0; i < DTKNQ_REG_CNT; i++) ++ { ++ in_tkn_epnums[ i ] = dwc_read_reg32(addr); ++ DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i+1, ++ in_tkn_epnums[i]); ++ if (addr == &dev_global_regs->dvbusdis) { ++ addr = &dev_global_regs->dtknqr3_dthrctl; ++ } ++ else { ++ ++addr; ++ } ++ ++ } ++ ++ /* Copy the DTKNQR1 data to the bit field. */ ++ dtknqr1.d32 = in_tkn_epnums[0]; ++ /* Get the EP numbers */ ++ in_tkn_epnums[0] = dtknqr1.b.epnums0_5; ++ ndx = dtknqr1.b.intknwptr - 1; ++ ++ //DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx); ++ if (ndx == -1) { ++ /** @todo Find a simpler way to calculate the max ++ * queue position.*/ ++ int cnt = TOKEN_Q_DEPTH; ++ if (TOKEN_Q_DEPTH <= 6) { ++ cnt = TOKEN_Q_DEPTH - 1; ++ } ++ else if (TOKEN_Q_DEPTH <= 14) { ++ cnt = TOKEN_Q_DEPTH - 7; ++ } ++ else if (TOKEN_Q_DEPTH <= 22) { ++ cnt = TOKEN_Q_DEPTH - 15; ++ } ++ else { ++ cnt = TOKEN_Q_DEPTH - 23; ++ } ++ epnum = (in_tkn_epnums[ DTKNQ_REG_CNT - 1 ] >> (cnt * 4)) & 0xF; ++ } ++ else { ++ if (ndx <= 5) { ++ epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF; ++ } ++ else if (ndx <= 13) { ++ ndx -= 6; ++ epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF; ++ } ++ else if (ndx <= 21) { ++ ndx -= 14; ++ epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF; ++ } ++ else if (ndx <= 29) { ++ ndx -= 22; ++ epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF; ++ } ++ } ++ //DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum); ++ return epnum; ++} ++ ++/** ++ * This interrupt occurs when the non-periodic Tx FIFO is half-empty. ++ * The active request is checked for the next packet to be loaded into ++ * the non-periodic Tx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = ++ core_if->core_global_regs; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ gnptxsts_data_t txstatus = {.d32 = 0}; ++ gintsts_data_t gintsts; ++ ++ int epnum = 0; ++ dwc_otg_pcd_ep_t *ep = 0; ++ uint32_t len = 0; ++ int dwords; ++ ++ /* Get the epnum from the IN Token Learning Queue. */ ++ epnum = get_ep_of_last_in_token(core_if); ++ ep = get_in_ep(pcd, epnum); ++ ++ DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %s(%d) \n", ep->ep.name, epnum); ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ dwords = (len + 3)/4; ++ ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n",txstatus.d32); ++ ++ while (txstatus.b.nptxqspcavail > 0 && ++ txstatus.b.nptxfspcavail > dwords && ++ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3)/4; ++ txstatus.d32 = dwc_read_reg32(&global_regs->gnptxsts); ++ DWC_DEBUGPL(DBG_PCDV,"GNPTXSTS=0x%08x\n",txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", ++ dwc_read_reg32(&global_regs->gnptxsts)); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.nptxfempty = 1; ++ dwc_write_reg32 (&global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function is called when dedicated Tx FIFO Empty interrupt occurs. ++ * The active request is checked for the next packet to be loaded into ++ * apropriate Tx FIFO. ++ */ ++static int32_t write_empty_tx_fifo(dwc_otg_pcd_t *pcd, uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t* dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *ep_regs; ++ dtxfsts_data_t txstatus = {.d32 = 0}; ++ dwc_otg_pcd_ep_t *ep = 0; ++ uint32_t len = 0; ++ int dwords; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++ DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %s(%d) \n", ep->ep.name, epnum); ++ ++ ep_regs = core_if->dev_if->in_ep_regs[epnum]; ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3)/4; ++ ++ /* While there is space in the queue and space in the FIFO and ++ * More data to tranfer, Write packets to the Tx FIFO */ ++ txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,txstatus.d32); ++ ++ while (txstatus.b.txfspcavail > dwords && ++ ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len && ++ ep->dwc_ep.xfer_len != 0) { ++ /* Write the FIFO */ ++ dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0); ++ ++ len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ if (len > ep->dwc_ep.maxpacket) { ++ len = ep->dwc_ep.maxpacket; ++ } ++ ++ dwords = (len + 3)/4; ++ txstatus.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts); ++ DWC_DEBUGPL(DBG_PCDV,"dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32); ++ } ++ ++ DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n",epnum,dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dtxfsts)); ++ ++ return 1; ++} ++ ++ ++/** ++ * This function is called when the Device is disconnected. It stops ++ * any active requests and informs the Gadget driver of the ++ * disconnect. ++ */ ++void dwc_otg_pcd_stop(dwc_otg_pcd_t *pcd) ++{ ++ int i, num_in_eps, num_out_eps; ++ dwc_otg_pcd_ep_t *ep; ++ ++ gintmsk_data_t intr_mask = {.d32 = 0}; ++ ++ num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps; ++ num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__); ++ /* don't disconnect drivers more than once */ ++ if (pcd->ep0state == EP0_DISCONNECT) { ++ DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__); ++ return; ++ } ++ pcd->ep0state = EP0_DISCONNECT; ++ ++ /* Reset the OTG state. */ ++ dwc_otg_pcd_update_otg(pcd, 1); ++ ++ /* Disable the NP Tx Fifo Empty Interrupt. */ ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Flush the FIFOs */ ++ /**@todo NGS Flush Periodic FIFOs */ ++ dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10); ++ dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd)); ++ ++ /* prevent new request submissions, kill any outstanding requests */ ++ ep = &pcd->ep0; ++ dwc_otg_request_nuke(ep); ++ /* prevent new request submissions, kill any outstanding requests */ ++ for (i = 0; i < num_in_eps; i++) ++ { ++ dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i]; ++ dwc_otg_request_nuke(ep); ++ } ++ /* prevent new request submissions, kill any outstanding requests */ ++ for (i = 0; i < num_out_eps; i++) ++ { ++ dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i]; ++ dwc_otg_request_nuke(ep); ++ } ++ ++ /* report disconnect; the driver is already quiesced */ ++ if (pcd->driver && pcd->driver->disconnect) { ++ SPIN_UNLOCK(&pcd->lock); ++ pcd->driver->disconnect(&pcd->gadget); ++ SPIN_LOCK(&pcd->lock); ++ } ++} ++ ++/** ++ * This interrupt indicates that ... ++ */ ++int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t *pcd) ++{ ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ gintsts_data_t gintsts; ++ ++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "i2cintr"); ++ intr_mask.b.i2cintr = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.i2cintr = 1; ++ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++ ++/** ++ * This interrupt indicates that ... ++ */ ++int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t *pcd) ++{ ++ gintsts_data_t gintsts; ++#if defined(VERBOSE) ++ DWC_PRINT("Early Suspend Detected\n"); ++#endif ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.erlysuspend = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This function configures EPO to receive SETUP packets. ++ * ++ * @todo NGS: Update the comments from the HW FS. ++ * ++ * -# Program the following fields in the endpoint specific registers ++ * for Control OUT EP 0, in order to receive a setup packet ++ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back ++ * setup packets) ++ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back ++ * to back setup packets) ++ * - In DMA mode, DOEPDMA0 Register with a memory address to ++ * store any setup packets received ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param pcd Programming view of the PCD. ++ */ ++static inline void ep0_out_start(dwc_otg_core_if_t *core_if, dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ deptsiz0_data_t doeptsize0 = { .d32 = 0}; ++ dwc_otg_dma_desc_t* dma_desc; ++ depctl_data_t doepctl = { .d32 = 0 }; ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV,"%s() doepctl0=%0x\n", __func__, ++ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl)); ++#endif ++ ++ doeptsize0.b.supcnt = 3; ++ doeptsize0.b.pktcnt = 1; ++ doeptsize0.b.xfersize = 8*3; ++ ++ ++ if (core_if->dma_enable) { ++ if (!core_if->dma_desc_enable) { ++ /** put here as for Hermes mode deptisz register should not be written */ ++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz, ++ doeptsize0.d32); ++ ++ /** @todo dma needs to handle multiple setup packets (up to 3) */ ++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, ++ pcd->setup_pkt_dma_handle); ++ } else { ++ dev_if->setup_desc_index = (dev_if->setup_desc_index + 1) & 1; ++ dma_desc = dev_if->setup_desc_addr[dev_if->setup_desc_index]; ++ ++ /** DMA Descriptor Setup */ ++ dma_desc->status.b.bs = BS_HOST_BUSY; ++ dma_desc->status.b.l = 1; ++ dma_desc->status.b.ioc = 1; ++ dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket; ++ dma_desc->buf = pcd->setup_pkt_dma_handle; ++ dma_desc->status.b.bs = BS_HOST_READY; ++ ++ /** DOEPDMA0 Register write */ ++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepdma, dev_if->dma_setup_desc_addr[dev_if->setup_desc_index]); ++ } ++ ++ } else { ++ /** put here as for Hermes mode deptisz register should not be written */ ++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doeptsiz, ++ doeptsize0.d32); ++ } ++ ++ /** DOEPCTL0 Register write */ ++ doepctl.b.epena = 1; ++ doepctl.b.cnak = 1; ++ dwc_write_reg32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32); ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV,"doepctl0=%0x\n", ++ dwc_read_reg32(&dev_if->out_ep_regs[0]->doepctl)); ++ DWC_DEBUGPL(DBG_PCDV,"diepctl0=%0x\n", ++ dwc_read_reg32(&dev_if->in_ep_regs[0]->diepctl)); ++#endif ++} ++ ++ ++/** ++ * This interrupt occurs when a USB Reset is detected. When the USB ++ * Reset Interrupt occurs the device state is set to DEFAULT and the ++ * EP0 state is set to IDLE. ++ * -# Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1) ++ * -# Unmask the following interrupt bits ++ * - DAINTMSK.INEP0 = 1 (Control 0 IN endpoint) ++ * - DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint) ++ * - DOEPMSK.SETUP = 1 ++ * - DOEPMSK.XferCompl = 1 ++ * - DIEPMSK.XferCompl = 1 ++ * - DIEPMSK.TimeOut = 1 ++ * -# Program the following fields in the endpoint specific registers ++ * for Control OUT EP 0, in order to receive a setup packet ++ * - DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back ++ * setup packets) ++ * - DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back ++ * to back setup packets) ++ * - In DMA mode, DOEPDMA0 Register with a memory address to ++ * store any setup packets received ++ * At this point, all the required initialization, except for enabling ++ * the control 0 OUT endpoint is done, for receiving SETUP packets. ++ */ ++int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ depctl_data_t doepctl = { .d32 = 0}; ++ ++ daint_data_t daintmsk = { .d32 = 0}; ++ doepmsk_data_t doepmsk = { .d32 = 0}; ++ diepmsk_data_t diepmsk = { .d32 = 0}; ++ ++ dcfg_data_t dcfg = { .d32=0 }; ++ grstctl_t resetctl = { .d32=0 }; ++ dctl_data_t dctl = {.d32=0}; ++ int i = 0; ++ gintsts_data_t gintsts; ++ ++ DWC_PRINT("USB RESET\n"); ++#ifdef DWC_EN_ISOC ++ for(i = 1;i < 16; ++i) ++ { ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ep = get_in_ep(pcd,i); ++ if(ep != 0){ ++ dwc_ep = &ep->dwc_ep; ++ dwc_ep->next_frame = 0xffffffff; ++ } ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ /* reset the HNP settings */ ++ dwc_otg_pcd_update_otg(pcd, 1); ++ ++ /* Clear the Remote Wakeup Signalling */ ++ dctl.b.rmtwkupsig = 1; ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dctl, ++ dctl.d32, 0); ++ ++ /* Set NAK for all OUT EPs */ ++ doepctl.b.snak = 1; ++ for (i=0; i <= dev_if->num_out_eps; i++) ++ { ++ dwc_write_reg32(&dev_if->out_ep_regs[i]->doepctl, ++ doepctl.d32); ++ } ++ ++ /* Flush the NP Tx FIFO */ ++ dwc_otg_flush_tx_fifo(core_if, 0x10); ++ /* Flush the Learning Queue */ ++ resetctl.b.intknqflsh = 1; ++ dwc_write_reg32(&core_if->core_global_regs->grstctl, resetctl.d32); ++ ++ if(core_if->multiproc_int_enable) { ++ daintmsk.b.inep0 = 1; ++ daintmsk.b.outep0 = 1; ++ dwc_write_reg32(&dev_if->dev_global_regs->deachintmsk, daintmsk.d32); ++ ++ doepmsk.b.setup = 1; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ ++ if(core_if->dma_desc_enable) { ++ doepmsk.b.stsphsercvd = 1; ++ doepmsk.b.bna = 1; ++ } ++/* ++ doepmsk.b.babble = 1; ++ doepmsk.b.nyet = 1; ++ ++ if(core_if->dma_enable) { ++ doepmsk.b.nak = 1; ++ } ++*/ ++ dwc_write_reg32(&dev_if->dev_global_regs->doepeachintmsk[0], doepmsk.d32); ++ ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ diepmsk.b.intknepmis = 1; ++ ++ if(core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++/* ++ if(core_if->dma_enable) { ++ diepmsk.b.nak = 1; ++ } ++*/ ++ dwc_write_reg32(&dev_if->dev_global_regs->diepeachintmsk[0], diepmsk.d32); ++ } else{ ++ daintmsk.b.inep0 = 1; ++ daintmsk.b.outep0 = 1; ++ dwc_write_reg32(&dev_if->dev_global_regs->daintmsk, daintmsk.d32); ++ ++ doepmsk.b.setup = 1; ++ doepmsk.b.xfercompl = 1; ++ doepmsk.b.ahberr = 1; ++ doepmsk.b.epdisabled = 1; ++ ++ if(core_if->dma_desc_enable) { ++ doepmsk.b.stsphsercvd = 1; ++ doepmsk.b.bna = 1; ++ } ++/* ++ doepmsk.b.babble = 1; ++ doepmsk.b.nyet = 1; ++ doepmsk.b.nak = 1; ++*/ ++ dwc_write_reg32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32); ++ ++ diepmsk.b.xfercompl = 1; ++ diepmsk.b.timeout = 1; ++ diepmsk.b.epdisabled = 1; ++ diepmsk.b.ahberr = 1; ++ diepmsk.b.intknepmis = 1; ++ ++ if(core_if->dma_desc_enable) { ++ diepmsk.b.bna = 1; ++ } ++ ++// diepmsk.b.nak = 1; ++ ++ dwc_write_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32); ++ } ++ ++ /* Reset Device Address */ ++ dcfg.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dcfg); ++ dcfg.b.devaddr = 0; ++ dwc_write_reg32(&dev_if->dev_global_regs->dcfg, dcfg.d32); ++ ++ /* setup EP0 to receive SETUP packets */ ++ ep0_out_start(core_if, pcd); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.usbreset = 1; ++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * Get the device speed from the device status register and convert it ++ * to USB speed constant. ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ */ ++static int get_device_speed(dwc_otg_core_if_t *core_if) ++{ ++ dsts_data_t dsts; ++ enum usb_device_speed speed = USB_SPEED_UNKNOWN; ++ dsts.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dsts); ++ ++ switch (dsts.b.enumspd) { ++ case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ: ++ speed = USB_SPEED_HIGH; ++ break; ++ case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ: ++ case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ: ++ speed = USB_SPEED_FULL; ++ break; ++ ++ case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ: ++ speed = USB_SPEED_LOW; ++ break; ++ } ++ ++ return speed; ++} ++ ++/** ++ * Read the device status register and set the device speed in the ++ * data structure. ++ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate. ++ */ ++int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ gintsts_data_t gintsts; ++ gusbcfg_data_t gusbcfg; ++ dwc_otg_core_global_regs_t *global_regs = ++ GET_CORE_IF(pcd)->core_global_regs; ++ uint8_t utmi16b, utmi8b; ++ DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n"); ++ ++ if (GET_CORE_IF(pcd)->snpsid >= 0x4F54260A) { ++ utmi16b = 6; ++ utmi8b = 9; ++ } else { ++ utmi16b = 4; ++ utmi8b = 8; ++ } ++ dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ++#ifdef DEBUG_EP0 ++ print_ep0_state(pcd); ++#endif ++ ++ if (pcd->ep0state == EP0_DISCONNECT) { ++ pcd->ep0state = EP0_IDLE; ++ } ++ else if (pcd->ep0state == EP0_STALL) { ++ pcd->ep0state = EP0_IDLE; ++ } ++ ++ pcd->ep0state = EP0_IDLE; ++ ++ ep0->stopped = 0; ++ ++ pcd->gadget.speed = get_device_speed(GET_CORE_IF(pcd)); ++ ++ /* Set USB turnaround time based on device speed and PHY interface. */ ++ gusbcfg.d32 = dwc_read_reg32(&global_regs->gusbcfg); ++ if (pcd->gadget.speed == USB_SPEED_HIGH) { ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_ULPI) { ++ /* ULPI interface */ ++ gusbcfg.b.usbtrdtim = 9; ++ } ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI) { ++ /* UTMI+ interface */ ++ if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } ++ else if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 1) { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } ++ else if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 8) { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } ++ else { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } ++ } ++ if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type == DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) { ++ /* UTMI+ OR ULPI interface */ ++ if (gusbcfg.b.ulpi_utmi_sel == 1) { ++ /* ULPI interface */ ++ gusbcfg.b.usbtrdtim = 9; ++ } ++ else { ++ /* UTMI+ interface */ ++ if (GET_CORE_IF(pcd)->core_params->phy_utmi_width == 16) { ++ gusbcfg.b.usbtrdtim = utmi16b; ++ } ++ else { ++ gusbcfg.b.usbtrdtim = utmi8b; ++ } ++ } ++ } ++ } ++ else { ++ /* Full or low speed */ ++ gusbcfg.b.usbtrdtim = 9; ++ } ++ dwc_write_reg32(&global_regs->gusbcfg, gusbcfg.d32); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.enumdone = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that the ISO OUT Packet was dropped due to ++ * Rx FIFO full or Rx Status Queue Full. If this interrupt occurs ++ * read all the data from the Rx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t *pcd) ++{ ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ gintsts_data_t gintsts; ++ ++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", ++ "ISOC Out Dropped"); ++ ++ intr_mask.b.isooutdrop = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ ++ gintsts.d32 = 0; ++ gintsts.b.isooutdrop = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates the end of the portion of the micro-frame ++ * for periodic transactions. If there is a periodic transaction for ++ * the next frame, load the packets into the EP periodic Tx FIFO. ++ */ ++int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t *pcd) ++{ ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ gintsts_data_t gintsts; ++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "EOP"); ++ ++ intr_mask.b.eopframe = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.eopframe = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that EP of the packet on the top of the ++ * non-periodic Tx FIFO does not match EP of the IN Token received. ++ * ++ * The "Device IN Token Queue" Registers are read to determine the ++ * order the IN Tokens have been received. The non-periodic Tx FIFO ++ * is flushed, so it can be reloaded in the order seen in the IN Token ++ * Queue. ++ */ ++int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_core_if_t *core_if) ++{ ++ gintsts_data_t gintsts; ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.epmismatch = 1; ++ dwc_write_reg32 (&core_if->core_global_regs->gintsts, gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This funcion stalls EP0. ++ */ ++static inline void ep0_do_stall(dwc_otg_pcd_t *pcd, const int err_val) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ struct usb_ctrlrequest *ctrl = &pcd->setup_pkt->req; ++ DWC_WARN("req %02x.%02x protocol STALL; err %d\n", ++ ctrl->bRequestType, ctrl->bRequest, err_val); ++ ++ ep0->dwc_ep.is_in = 1; ++ dwc_otg_ep_set_stall(pcd->otg_dev->core_if, &ep0->dwc_ep); ++ pcd->ep0.stopped = 1; ++ pcd->ep0state = EP0_IDLE; ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++} ++ ++/** ++ * This functions delegates the setup command to the gadget driver. ++ */ ++static inline void do_gadget_setup(dwc_otg_pcd_t *pcd, ++ struct usb_ctrlrequest * ctrl) ++{ ++ int ret = 0; ++ if (pcd->driver && pcd->driver->setup) { ++ SPIN_UNLOCK(&pcd->lock); ++ ret = pcd->driver->setup(&pcd->gadget, ctrl); ++ SPIN_LOCK(&pcd->lock); ++ if (ret < 0) { ++ ep0_do_stall(pcd, ret); ++ } ++ ++ /** @todo This is a g_file_storage gadget driver specific ++ * workaround: a DELAYED_STATUS result from the fsg_setup ++ * routine will result in the gadget queueing a EP0 IN status ++ * phase for a two-stage control transfer. Exactly the same as ++ * a SET_CONFIGURATION/SET_INTERFACE except that this is a class ++ * specific request. Need a generic way to know when the gadget ++ * driver will queue the status phase. Can we assume when we ++ * call the gadget driver setup() function that it will always ++ * queue and require the following flag? Need to look into ++ * this. ++ */ ++ ++ if (ret == 256 + 999) { ++ pcd->request_config = 1; ++ } ++ } ++} ++ ++/** ++ * This function starts the Zero-Length Packet for the IN status phase ++ * of a 2 stage control transfer. ++ */ ++static inline void do_setup_in_status_phase(dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ if (pcd->ep0state == EP0_STALL) { ++ return; ++ } ++ ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ ++ /* Prepare for more SETUP Packets */ ++ DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n"); ++ ep0->dwc_ep.xfer_len = 0; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.is_in = 1; ++ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ++ /* Prepare for more SETUP Packets */ ++// if(GET_CORE_IF(pcd)->dma_enable == 0) ep0_out_start(GET_CORE_IF(pcd), pcd); ++} ++ ++/** ++ * This function starts the Zero-Length Packet for the OUT status phase ++ * of a 2 stage control transfer. ++ */ ++static inline void do_setup_out_status_phase(dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ if (pcd->ep0state == EP0_STALL) { ++ DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n"); ++ return; ++ } ++ pcd->ep0state = EP0_OUT_STATUS_PHASE; ++ ++ DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n"); ++ ep0->dwc_ep.xfer_len = 0; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.is_in = 0; ++ ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ++ /* Prepare for more SETUP Packets */ ++ if(GET_CORE_IF(pcd)->dma_enable == 0) { ++ ep0_out_start(GET_CORE_IF(pcd), pcd); ++ } ++} ++ ++/** ++ * Clear the EP halt (STALL) and if pending requests start the ++ * transfer. ++ */ ++static inline void pcd_clear_halt(dwc_otg_pcd_t *pcd, dwc_otg_pcd_ep_t *ep) ++{ ++ if(ep->dwc_ep.stall_clear_flag == 0) ++ dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep); ++ ++ /* Reactive the EP */ ++ dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); ++ if (ep->stopped) { ++ ep->stopped = 0; ++ /* If there is a request in the EP queue start it */ ++ ++ /** @todo FIXME: this causes an EP mismatch in DMA mode. ++ * epmismatch not yet implemented. */ ++ ++ /* ++ * Above fixme is solved by implmenting a tasklet to call the ++ * start_next_request(), outside of interrupt context at some ++ * time after the current time, after a clear-halt setup packet. ++ * Still need to implement ep mismatch in the future if a gadget ++ * ever uses more than one endpoint at once ++ */ ++ ep->queue_sof = 1; ++ tasklet_schedule (pcd->start_xfer_tasklet); ++ } ++ /* Start Control Status Phase */ ++ do_setup_in_status_phase(pcd); ++} ++ ++/** ++ * This function is called when the SET_FEATURE TEST_MODE Setup packet ++ * is sent from the host. The Device Control register is written with ++ * the Test Mode bits set to the specified Test Mode. This is done as ++ * a tasklet so that the "Status" phase of the control transfer ++ * completes before transmitting the TEST packets. ++ * ++ * @todo This has not been tested since the tasklet struct was put ++ * into the PCD struct! ++ * ++ */ ++static void do_test_mode(unsigned long data) ++{ ++ dctl_data_t dctl; ++ dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *)data; ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ int test_mode = pcd->test_mode; ++ ++ ++// DWC_WARN("%s() has not been tested since being rewritten!\n", __func__); ++ ++ dctl.d32 = dwc_read_reg32(&core_if->dev_if->dev_global_regs->dctl); ++ switch (test_mode) { ++ case 1: // TEST_J ++ dctl.b.tstctl = 1; ++ break; ++ ++ case 2: // TEST_K ++ dctl.b.tstctl = 2; ++ break; ++ ++ case 3: // TEST_SE0_NAK ++ dctl.b.tstctl = 3; ++ break; ++ ++ case 4: // TEST_PACKET ++ dctl.b.tstctl = 4; ++ break; ++ ++ case 5: // TEST_FORCE_ENABLE ++ dctl.b.tstctl = 5; ++ break; ++ } ++ dwc_write_reg32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32); ++} ++ ++/** ++ * This function process the GET_STATUS Setup Commands. ++ */ ++static inline void do_get_status(dwc_otg_pcd_t *pcd) ++{ ++ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ uint16_t *status = pcd->status_buf; ++ ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, ++ "GET_STATUS %02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bRequestType, ctrl.bRequest, ++ ctrl.wValue, ctrl.wIndex, ctrl.wLength); ++#endif ++ ++ switch (ctrl.bRequestType & USB_RECIP_MASK) { ++ case USB_RECIP_DEVICE: ++ *status = 0x1; /* Self powered */ ++ *status |= pcd->remote_wakeup_enable << 1; ++ break; ++ ++ case USB_RECIP_INTERFACE: ++ *status = 0; ++ break; ++ ++ case USB_RECIP_ENDPOINT: ++ ep = get_ep_by_addr(pcd, ctrl.wIndex); ++ if (ep == 0 || ctrl.wLength > 2) { ++ ep0_do_stall(pcd, -EOPNOTSUPP); ++ return; ++ } ++ /** @todo check for EP stall */ ++ *status = ep->stopped; ++ break; ++ } ++ pcd->ep0_pending = 1; ++ ep0->dwc_ep.start_xfer_buff = (uint8_t *)status; ++ ep0->dwc_ep.xfer_buff = (uint8_t *)status; ++ ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle; ++ ep0->dwc_ep.xfer_len = 2; ++ ep0->dwc_ep.xfer_count = 0; ++ ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len; ++ dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep); ++} ++/** ++ * This function process the SET_FEATURE Setup Commands. ++ */ ++static inline void do_set_feature(dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_core_global_regs_t *global_regs = ++ core_if->core_global_regs; ++ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep = 0; ++ int32_t otg_cap_param = core_if->core_params->otg_cap; ++ gotgctl_data_t gotgctl = { .d32 = 0 }; ++ ++ DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bRequestType, ctrl.bRequest, ++ ctrl.wValue, ctrl.wIndex, ctrl.wLength); ++ DWC_DEBUGPL(DBG_PCD,"otg_cap=%d\n", otg_cap_param); ++ ++ ++ switch (ctrl.bRequestType & USB_RECIP_MASK) { ++ case USB_RECIP_DEVICE: ++ switch (ctrl.wValue) { ++ case USB_DEVICE_REMOTE_WAKEUP: ++ pcd->remote_wakeup_enable = 1; ++ break; ++ ++ case USB_DEVICE_TEST_MODE: ++ /* Setup the Test Mode tasklet to do the Test ++ * Packet generation after the SETUP Status ++ * phase has completed. */ ++ ++ /** @todo This has not been tested since the ++ * tasklet struct was put into the PCD ++ * struct! */ ++ pcd->test_mode_tasklet.next = 0; ++ pcd->test_mode_tasklet.state = 0; ++ atomic_set(&pcd->test_mode_tasklet.count, 0); ++ pcd->test_mode_tasklet.func = do_test_mode; ++ pcd->test_mode_tasklet.data = (unsigned long)pcd; ++ pcd->test_mode = ctrl.wIndex >> 8; ++ tasklet_schedule(&pcd->test_mode_tasklet); ++ break; ++ ++ case USB_DEVICE_B_HNP_ENABLE: ++ DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n"); ++ ++ /* dev may initiate HNP */ ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->b_hnp_enable = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ DWC_DEBUGPL(DBG_PCD, "Request B HNP\n"); ++ /**@todo Is the gotgctl.devhnpen cleared ++ * by a USB Reset? */ ++ gotgctl.b.devhnpen = 1; ++ gotgctl.b.hnpreq = 1; ++ dwc_write_reg32(&global_regs->gotgctl, gotgctl.d32); ++ } ++ else { ++ ep0_do_stall(pcd, -EOPNOTSUPP); ++ } ++ break; ++ ++ case USB_DEVICE_A_HNP_SUPPORT: ++ /* RH port supports HNP */ ++ DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n"); ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->a_hnp_support = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ } ++ else { ++ ep0_do_stall(pcd, -EOPNOTSUPP); ++ } ++ break; ++ ++ case USB_DEVICE_A_ALT_HNP_SUPPORT: ++ /* other RH port does */ ++ DWC_DEBUGPL(DBG_PCDV, "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n"); ++ if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) { ++ pcd->a_alt_hnp_support = 1; ++ dwc_otg_pcd_update_otg(pcd, 0); ++ } ++ else { ++ ep0_do_stall(pcd, -EOPNOTSUPP); ++ } ++ break; ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ ++ case USB_RECIP_INTERFACE: ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ case USB_RECIP_ENDPOINT: ++ if (ctrl.wValue == USB_ENDPOINT_HALT) { ++ ep = get_ep_by_addr(pcd, ctrl.wIndex); ++ if (ep == 0) { ++ ep0_do_stall(pcd, -EOPNOTSUPP); ++ return; ++ } ++ ep->stopped = 1; ++ dwc_otg_ep_set_stall(core_if, &ep->dwc_ep); ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ } ++} ++ ++/** ++ * This function process the CLEAR_FEATURE Setup Commands. ++ */ ++static inline void do_clear_feature(dwc_otg_pcd_t *pcd) ++{ ++ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep = 0; ++ ++ DWC_DEBUGPL(DBG_PCD, ++ "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bRequestType, ctrl.bRequest, ++ ctrl.wValue, ctrl.wIndex, ctrl.wLength); ++ ++ switch (ctrl.bRequestType & USB_RECIP_MASK) { ++ case USB_RECIP_DEVICE: ++ switch (ctrl.wValue) { ++ case USB_DEVICE_REMOTE_WAKEUP: ++ pcd->remote_wakeup_enable = 0; ++ break; ++ ++ case USB_DEVICE_TEST_MODE: ++ /** @todo Add CLEAR_FEATURE for TEST modes. */ ++ break; ++ } ++ do_setup_in_status_phase(pcd); ++ break; ++ ++ case USB_RECIP_ENDPOINT: ++ ep = get_ep_by_addr(pcd, ctrl.wIndex); ++ if (ep == 0) { ++ ep0_do_stall(pcd, -EOPNOTSUPP); ++ return; ++ } ++ ++ pcd_clear_halt(pcd, ep); ++ ++ break; ++ } ++} ++ ++/** ++ * This function process the SET_ADDRESS Setup Commands. ++ */ ++static inline void do_set_address(dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req; ++ ++ if (ctrl.bRequestType == USB_RECIP_DEVICE) { ++ dcfg_data_t dcfg = {.d32=0}; ++ ++#ifdef DEBUG_EP0 ++// DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue); ++#endif ++ dcfg.b.devaddr = ctrl.wValue; ++ dwc_modify_reg32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32); ++ do_setup_in_status_phase(pcd); ++ } ++} ++ ++/** ++ * This function processes SETUP commands. In Linux, the USB Command ++ * processing is done in two places - the first being the PCD and the ++ * second in the Gadget Driver (for example, the File-Backed Storage ++ * Gadget Driver). ++ * ++ * <table> ++ * <tr><td>Command </td><td>Driver </td><td>Description</td></tr> ++ * ++ * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as ++ * defined in chapter 9 of the USB 2.0 Specification chapter 9 ++ * </td></tr> ++ * ++ * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint ++ * requests are the ENDPOINT_HALT feature is procesed, all others the ++ * interface requests are ignored.</td></tr> ++ * ++ * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint ++ * requests are processed by the PCD. Interface requests are passed ++ * to the Gadget Driver.</td></tr> ++ * ++ * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg, ++ * with device address received </td></tr> ++ * ++ * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the ++ * requested descriptor</td></tr> ++ * ++ * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional - ++ * not implemented by any of the existing Gadget Drivers.</td></tr> ++ * ++ * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable ++ * all EPs and enable EPs for new configuration.</td></tr> ++ * ++ * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return ++ * the current configuration</td></tr> ++ * ++ * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all ++ * EPs and enable EPs for new configuration.</td></tr> ++ * ++ * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the ++ * current interface.</td></tr> ++ * ++ * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug ++ * message.</td></tr> ++ * </table> ++ * ++ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are ++ * processed by pcd_setup. Calling the Function Driver's setup function from ++ * pcd_setup processes the gadget SETUP commands. ++ */ ++static inline void pcd_setup(dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ struct usb_ctrlrequest ctrl = pcd->setup_pkt->req; ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ ++ deptsiz0_data_t doeptsize0 = { .d32 = 0}; ++ ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n", ++ ctrl.bRequestType, ctrl.bRequest, ++ ctrl.wValue, ctrl.wIndex, ctrl.wLength); ++#endif ++ ++ doeptsize0.d32 = dwc_read_reg32(&dev_if->out_ep_regs[0]->doeptsiz); ++ ++ /** @todo handle > 1 setup packet , assert error for now */ ++ ++ if (core_if->dma_enable && core_if->dma_desc_enable == 0 && (doeptsize0.b.supcnt < 2)) { ++ DWC_ERROR ("\n\n----------- CANNOT handle > 1 setup packet in DMA mode\n\n"); ++ } ++ ++ /* Clean up the request queue */ ++ dwc_otg_request_nuke(ep0); ++ ep0->stopped = 0; ++ ++ if (ctrl.bRequestType & USB_DIR_IN) { ++ ep0->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_DATA_PHASE; ++ } ++ else { ++ ep0->dwc_ep.is_in = 0; ++ pcd->ep0state = EP0_OUT_DATA_PHASE; ++ } ++ ++ if(ctrl.wLength == 0) { ++ ep0->dwc_ep.is_in = 1; ++ pcd->ep0state = EP0_IN_STATUS_PHASE; ++ } ++ ++ if ((ctrl.bRequestType & USB_TYPE_MASK) != USB_TYPE_STANDARD) { ++ /* handle non-standard (class/vendor) requests in the gadget driver */ ++ do_gadget_setup(pcd, &ctrl); ++ return; ++ } ++ ++ /** @todo NGS: Handle bad setup packet? */ ++ ++/////////////////////////////////////////// ++//// --- Standard Request handling --- //// ++ ++ switch (ctrl.bRequest) { ++ case USB_REQ_GET_STATUS: ++ do_get_status(pcd); ++ break; ++ ++ case USB_REQ_CLEAR_FEATURE: ++ do_clear_feature(pcd); ++ break; ++ ++ case USB_REQ_SET_FEATURE: ++ do_set_feature(pcd); ++ break; ++ ++ case USB_REQ_SET_ADDRESS: ++ do_set_address(pcd); ++ break; ++ ++ case USB_REQ_SET_INTERFACE: ++ case USB_REQ_SET_CONFIGURATION: ++// _pcd->request_config = 1; /* Configuration changed */ ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ case USB_REQ_SYNCH_FRAME: ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ ++ default: ++ /* Call the Gadget Driver's setup functions */ ++ do_gadget_setup(pcd, &ctrl); ++ break; ++ } ++} ++ ++/** ++ * This function completes the ep0 control transfer. ++ */ ++static int32_t ep0_complete_request(dwc_otg_pcd_ep_t *ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs = ++ dev_if->in_ep_regs[ep->dwc_ep.num]; ++#ifdef DEBUG_EP0 ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs = ++ dev_if->out_ep_regs[ep->dwc_ep.num]; ++#endif ++ deptsiz0_data_t deptsiz; ++ desc_sts_data_t desc_sts; ++ dwc_otg_pcd_request_t *req; ++ int is_last = 0; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ ++ //DWC_DEBUGPL(DBG_PCDV, "%s() %s\n", __func__, _ep->ep.name); ++ ++ if (pcd->ep0_pending && list_empty(&ep->queue)) { ++ if (ep->dwc_ep.is_in) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n"); ++#endif ++ do_setup_out_status_phase(pcd); ++ } ++ else { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n"); ++#endif ++ do_setup_in_status_phase(pcd); ++ } ++ pcd->ep0_pending = 0; ++ return 1; ++ } ++ ++ if (list_empty(&ep->queue)) { ++ return 0; ++ } ++ req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, queue); ++ ++ ++ if (pcd->ep0state == EP0_OUT_STATUS_PHASE || pcd->ep0state == EP0_IN_STATUS_PHASE) { ++ is_last = 1; ++ } ++ else if (ep->dwc_ep.is_in) { ++ deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz); ++ if(core_if->dma_desc_enable != 0) ++ desc_sts.d32 = readl(dev_if->in_desc_addr); ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n", ++ ep->ep.name, ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++#endif ++ ++ if (((core_if->dma_desc_enable == 0) && (deptsiz.b.xfersize == 0)) || ++ ((core_if->dma_desc_enable != 0) && (desc_sts.b.bytes == 0))) { ++ req->req.actual = ep->dwc_ep.xfer_count; ++ /* Is a Zero Len Packet needed? */ ++ if (req->req.zero) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n"); ++#endif ++ req->req.zero = 0; ++ } ++ do_setup_out_status_phase(pcd); ++ } ++ } ++ else { ++ /* ep0-OUT */ ++#ifdef DEBUG_EP0 ++ deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz); ++ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xsize=%d pktcnt=%d\n", ++ ep->ep.name, ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++#endif ++ req->req.actual = ep->dwc_ep.xfer_count; ++ /* Is a Zero Len Packet needed? */ ++ if (req->req.zero) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n"); ++#endif ++ req->req.zero = 0; ++ } ++ if(core_if->dma_desc_enable == 0) ++ do_setup_in_status_phase(pcd); ++ } ++ ++ /* Complete the request */ ++ if (is_last) { ++ dwc_otg_request_done(ep, req, 0); ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ return 1; ++ } ++ return 0; ++} ++ ++/** ++ * This function completes the request for the EP. If there are ++ * additional requests for the EP in the queue they will be started. ++ */ ++static void complete_ep(dwc_otg_pcd_ep_t *ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs = ++ dev_if->in_ep_regs[ep->dwc_ep.num]; ++ deptsiz_data_t deptsiz; ++ desc_sts_data_t desc_sts; ++ dwc_otg_pcd_request_t *req = 0; ++ dwc_otg_dma_desc_t* dma_desc; ++ uint32_t byte_count = 0; ++ int is_last = 0; ++ int i; ++ ++ DWC_DEBUGPL(DBG_PCDV,"%s() %s-%s\n", __func__, ep->ep.name, ++ (ep->dwc_ep.is_in?"IN":"OUT")); ++ ++ /* Get any pending requests */ ++ if (!list_empty(&ep->queue)) { ++ req = list_entry(ep->queue.next, dwc_otg_pcd_request_t, ++ queue); ++ if (!req) { ++ printk("complete_ep 0x%p, req = NULL!\n", ep); ++ return; ++ } ++ } ++ else { ++ printk("complete_ep 0x%p, ep->queue empty!\n", ep); ++ return; ++ } ++ DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending); ++ ++ if (ep->dwc_ep.is_in) { ++ deptsiz.d32 = dwc_read_reg32(&in_ep_regs->dieptsiz); ++ ++ if (core_if->dma_enable) { ++ if(core_if->dma_desc_enable == 0) { ++ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) { ++ byte_count = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count; ++ ++ ep->dwc_ep.xfer_buff += byte_count; ++ ep->dwc_ep.dma_addr += byte_count; ++ ep->dwc_ep.xfer_count += byte_count; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n", ++ ep->ep.name, ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ ++ ++ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } else if(ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } else { ++ DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n", ++ ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"), ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ } ++ } else { ++ dma_desc = ep->dwc_ep.desc_addr; ++ byte_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ ++ for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) { ++ desc_sts.d32 = readl(dma_desc); ++ byte_count += desc_sts.b.bytes; ++ dma_desc++; ++ } ++ ++ if(byte_count == 0) { ++ ep->dwc_ep.xfer_count = ep->dwc_ep.total_len; ++ is_last = 1; ++ } else { ++ DWC_WARN("Incomplete transfer\n"); ++ } ++ } ++ } else { ++ if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) { ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ DWC_DEBUGPL(DBG_PCDV, "%s len=%d xfersize=%d pktcnt=%d\n", ++ ep->ep.name, ep->dwc_ep.xfer_len, ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } else if(ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } ++ else { ++ DWC_WARN("Incomplete transfer (%s-%s [siz=%d pkt=%d])\n", ++ ep->ep.name, (ep->dwc_ep.is_in?"IN":"OUT"), ++ deptsiz.b.xfersize, deptsiz.b.pktcnt); ++ } ++ } ++ } else { ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs = ++ dev_if->out_ep_regs[ep->dwc_ep.num]; ++ desc_sts.d32 = 0; ++ if(core_if->dma_enable) { ++ if(core_if->dma_desc_enable) { ++ dma_desc = ep->dwc_ep.desc_addr; ++ byte_count = 0; ++ ep->dwc_ep.sent_zlp = 0; ++ for(i = 0; i < ep->dwc_ep.desc_cnt; ++i) { ++ desc_sts.d32 = readl(dma_desc); ++ byte_count += desc_sts.b.bytes; ++ dma_desc++; ++ } ++ ++ ep->dwc_ep.xfer_count = ep->dwc_ep.total_len ++ - byte_count + ((4 - (ep->dwc_ep.total_len & 0x3)) & 0x3); ++ is_last = 1; ++ } else { ++ deptsiz.d32 = 0; ++ deptsiz.d32 = dwc_read_reg32(&out_ep_regs->doeptsiz); ++ ++ byte_count = (ep->dwc_ep.xfer_len - ++ ep->dwc_ep.xfer_count - deptsiz.b.xfersize); ++ ep->dwc_ep.xfer_buff += byte_count; ++ ep->dwc_ep.dma_addr += byte_count; ++ ep->dwc_ep.xfer_count += byte_count; ++ ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } ++ else if(ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } ++ } else { ++ /* Check if the whole transfer was completed, ++ * if no, setup transfer for next portion of data ++ */ ++ if(ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } ++ else if(ep->dwc_ep.sent_zlp) { ++ /* ++ * This fragment of code should initiate 0 ++ * length trasfer in case if it is queued ++ * a trasfer with size divisible to EPs max ++ * packet size and with usb_request zero field ++ * is set, which means that after data is transfered, ++ * it is also should be transfered ++ * a 0 length packet at the end. For Slave and ++ * Buffer DMA modes in this case SW has ++ * to initiate 2 transfers one with transfer size, ++ * and the second with 0 size. For Desriptor ++ * DMA mode SW is able to initiate a transfer, ++ * which will handle all the packets including ++ * the last 0 legth. ++ */ ++ ep->dwc_ep.sent_zlp = 0; ++ dwc_otg_ep_start_zl_transfer(core_if, &ep->dwc_ep); ++ } else { ++ is_last = 1; ++ } ++ } ++ ++#ifdef DEBUG ++ ++ DWC_DEBUGPL(DBG_PCDV, "addr %p, %s len=%d cnt=%d xsize=%d pktcnt=%d\n", ++ &out_ep_regs->doeptsiz, ep->ep.name, ep->dwc_ep.xfer_len, ++ ep->dwc_ep.xfer_count, ++ deptsiz.b.xfersize, ++ deptsiz.b.pktcnt); ++#endif ++ } ++ ++ /* Complete the request */ ++ if (is_last) { ++ req->req.actual = ep->dwc_ep.xfer_count; ++ ++ dwc_otg_request_done(ep, req, 0); ++ ++ ep->dwc_ep.start_xfer_buff = 0; ++ ep->dwc_ep.xfer_buff = 0; ++ ep->dwc_ep.xfer_len = 0; ++ ++ /* If there is a request in the queue start it.*/ ++ start_next_request(ep); ++ } ++} ++ ++ ++#ifdef DWC_EN_ISOC ++ ++/** ++ * This function BNA interrupt for Isochronous EPs ++ * ++ */ ++static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t *ep) ++{ ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ volatile uint32_t *addr; ++ depctl_data_t depctl = {.d32 = 0}; ++ dwc_otg_pcd_t *pcd = ep->pcd; ++ dwc_otg_dma_desc_t *dma_desc; ++ int i; ++ ++ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num); ++ ++ if(dwc_ep->is_in) { ++ desc_sts_data_t sts = {.d32 = 0}; ++ for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc) ++ { ++ sts.d32 = readl(&dma_desc->status); ++ sts.b_iso_in.bs = BS_HOST_READY; ++ writel(sts.d32,&dma_desc->status); ++ } ++ } ++ else { ++ desc_sts_data_t sts = {.d32 = 0}; ++ for(i = 0;i < dwc_ep->desc_cnt; ++i, ++dma_desc) ++ { ++ sts.d32 = readl(&dma_desc->status); ++ sts.b_iso_out.bs = BS_HOST_READY; ++ writel(sts.d32,&dma_desc->status); ++ } ++ } ++ ++ if(dwc_ep->is_in == 0){ ++ addr = &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->doepctl; ++ } ++ else{ ++ addr = &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ depctl.b.epena = 1; ++ dwc_modify_reg32(addr,depctl.d32,depctl.d32); ++} ++ ++/** ++ * This function sets latest iso packet information(non-PTI mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++void set_current_pkt_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ deptsiz_data_t deptsiz = { .d32 = 0 }; ++ dma_addr_t dma_addr; ++ uint32_t offset; ++ ++ if(ep->proc_buf_num) ++ dma_addr = ep->dma_addr1; ++ else ++ dma_addr = ep->dma_addr0; ++ ++ ++ if(ep->is_in) { ++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz); ++ offset = ep->data_per_frame; ++ } else { ++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz); ++ offset = ep->data_per_frame + (0x4 & (0x4 - (ep->data_per_frame & 0x3))); ++ } ++ ++ if(!deptsiz.b.xfersize) { ++ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; ++ ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr; ++ ep->pkt_info[ep->cur_pkt].status = 0; ++ } else { ++ ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame; ++ ep->pkt_info[ep->cur_pkt].offset = ep->cur_pkt_dma_addr - dma_addr; ++ ep->pkt_info[ep->cur_pkt].status = -ENODATA; ++ } ++ ep->cur_pkt_addr += offset; ++ ep->cur_pkt_dma_addr += offset; ++ ep->cur_pkt++; ++} ++ ++/** ++ * This function sets latest iso packet information(DDMA mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++static void set_ddma_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep) ++{ ++ dwc_otg_dma_desc_t* dma_desc; ++ desc_sts_data_t sts = {.d32 = 0}; ++ iso_pkt_info_t *iso_packet; ++ uint32_t data_per_desc; ++ uint32_t offset; ++ int i, j; ++ ++ iso_packet = dwc_ep->pkt_info; ++ ++ /** Reinit closed DMA Descriptors*/ ++ /** ISO OUT EP */ ++ if(dwc_ep->is_in == 0) { ++ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ offset = 0; ++ ++ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) ++ { ++ for(j = 0; j < dwc_ep->pkt_per_frm; ++j) ++ { ++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; ++ ++ sts.d32 = readl(&dma_desc->status); ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE); ++ if(iso_packet->status) { ++ iso_packet->status = -ENODATA; ++ } ++ ++ /* Received data length */ ++ if(!sts.b_iso_out.rxbytes){ ++ iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes; ++ } else { ++ iso_packet->length = data_per_desc - sts.b_iso_out.rxbytes + ++ (4 - dwc_ep->data_per_frame % 4); ++ } ++ ++ iso_packet->offset = offset; ++ ++ offset += data_per_desc; ++ dma_desc ++; ++ iso_packet ++; ++ } ++ } ++ ++ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) ++ { ++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; ++ ++ sts.d32 = readl(&dma_desc->status); ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE); ++ if(iso_packet->status) { ++ iso_packet->status = -ENODATA; ++ } ++ ++ /* Received data length */ ++ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; ++ ++ iso_packet->offset = offset; ++ ++ offset += data_per_desc; ++ iso_packet++; ++ dma_desc++; ++ } ++ ++ sts.d32 = readl(&dma_desc->status); ++ ++ /* Write status in iso_packet_decsriptor */ ++ iso_packet->status = sts.b_iso_out.rxsts + (sts.b_iso_out.bs^BS_DMA_DONE); ++ if(iso_packet->status) { ++ iso_packet->status = -ENODATA; ++ } ++ /* Received data length */ ++ if(!sts.b_iso_out.rxbytes){ ++ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes; ++ } else { ++ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_out.rxbytes + ++ (4 - dwc_ep->data_per_frame % 4); ++ } ++ ++ iso_packet->offset = offset; ++ } ++ else /** ISO IN EP */ ++ { ++ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ for(i = 0; i < dwc_ep->desc_cnt - 1; i++) ++ { ++ sts.d32 = readl(&dma_desc->status); ++ ++ /* Write status in iso packet descriptor */ ++ iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE); ++ if(iso_packet->status != 0) { ++ iso_packet->status = -ENODATA; ++ ++ } ++ /* Bytes has been transfered */ ++ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes; ++ ++ dma_desc ++; ++ iso_packet++; ++ } ++ ++ sts.d32 = readl(&dma_desc->status); ++ while(sts.b_iso_in.bs == BS_DMA_BUSY) { ++ sts.d32 = readl(&dma_desc->status); ++ } ++ ++ /* Write status in iso packet descriptor ??? do be done with ERROR codes*/ ++ iso_packet->status = sts.b_iso_in.txsts + (sts.b_iso_in.bs^BS_DMA_DONE); ++ if(iso_packet->status != 0) { ++ iso_packet->status = -ENODATA; ++ } ++ ++ /* Bytes has been transfered */ ++ iso_packet->length = dwc_ep->data_per_frame - sts.b_iso_in.txbytes; ++ } ++} ++ ++/** ++ * This function reinitialize DMA Descriptors for Isochronous transfer ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP to start the transfer on. ++ * ++ */ ++static void reinit_ddma_iso_xfer(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep) ++{ ++ int i, j; ++ dwc_otg_dma_desc_t* dma_desc; ++ dma_addr_t dma_ad; ++ volatile uint32_t *addr; ++ desc_sts_data_t sts = { .d32 =0 }; ++ uint32_t data_per_desc; ++ ++ if(dwc_ep->is_in == 0) { ++ addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl; ++ } ++ else { ++ addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl; ++ } ++ ++ ++ if(dwc_ep->proc_buf_num == 0) { ++ /** Buffer 0 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr0; ++ } ++ else { ++ /** Buffer 1 descriptors setup */ ++ dma_ad = dwc_ep->dma_addr1; ++ } ++ ++ ++ /** Reinit closed DMA Descriptors*/ ++ /** ISO OUT EP */ ++ if(dwc_ep->is_in == 0) { ++ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ sts.b_iso_out.bs = BS_HOST_READY; ++ sts.b_iso_out.rxsts = 0; ++ sts.b_iso_out.l = 0; ++ sts.b_iso_out.sp = 0; ++ sts.b_iso_out.ioc = 0; ++ sts.b_iso_out.pid = 0; ++ sts.b_iso_out.framenum = 0; ++ ++ for(i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm; i+= dwc_ep->pkt_per_frm) ++ { ++ for(j = 0; j < dwc_ep->pkt_per_frm; ++j) ++ { ++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ ++ (uint32_t)dma_ad += data_per_desc; ++ dma_desc ++; ++ } ++ } ++ ++ for(j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) ++ { ++ ++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ ++ dma_desc++; ++ (uint32_t)dma_ad += data_per_desc; ++ } ++ ++ sts.b_iso_out.ioc = 1; ++ sts.b_iso_out.l = dwc_ep->proc_buf_num; ++ ++ data_per_desc = ((j + 1) * dwc_ep->maxpacket > dwc_ep->data_per_frame) ? ++ dwc_ep->data_per_frame - j * dwc_ep->maxpacket : dwc_ep->maxpacket; ++ data_per_desc += (data_per_desc % 4) ? (4 - data_per_desc % 4):0; ++ sts.b_iso_out.rxbytes = data_per_desc; ++ ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ } ++ else /** ISO IN EP */ ++ { ++ dma_desc = dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * dwc_ep->proc_buf_num; ++ ++ sts.b_iso_in.bs = BS_HOST_READY; ++ sts.b_iso_in.txsts = 0; ++ sts.b_iso_in.sp = 0; ++ sts.b_iso_in.ioc = 0; ++ sts.b_iso_in.pid = dwc_ep->pkt_per_frm; ++ sts.b_iso_in.framenum = dwc_ep->next_frame; ++ sts.b_iso_in.txbytes = dwc_ep->data_per_frame; ++ sts.b_iso_in.l = 0; ++ ++ for(i = 0; i < dwc_ep->desc_cnt - 1; i++) ++ { ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ ++ sts.b_iso_in.framenum += dwc_ep->bInterval; ++ (uint32_t)dma_ad += dwc_ep->data_per_frame; ++ dma_desc ++; ++ } ++ ++ sts.b_iso_in.ioc = 1; ++ sts.b_iso_in.l = dwc_ep->proc_buf_num; ++ ++ writel((uint32_t)dma_ad, &dma_desc->buf); ++ writel(sts.d32, &dma_desc->status); ++ ++ dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval * 1; ++ } ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++} ++ ++ ++/** ++ * This function is to handle Iso EP transfer complete interrupt ++ * in case Iso out packet was dropped ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param dwc_ep The EP for wihich transfer complete was asserted ++ * ++ */ ++static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t *core_if, dwc_ep_t *dwc_ep) ++{ ++ uint32_t dma_addr; ++ uint32_t drp_pkt; ++ uint32_t drp_pkt_cnt; ++ deptsiz_data_t deptsiz = { .d32 = 0 }; ++ depctl_data_t depctl = { .d32 = 0 }; ++ int i; ++ ++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz); ++ ++ drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt; ++ drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm); ++ ++ /* Setting dropped packets status */ ++ for(i = 0; i < drp_pkt_cnt; ++i) { ++ dwc_ep->pkt_info[drp_pkt].status = -ENODATA; ++ drp_pkt ++; ++ deptsiz.b.pktcnt--; ++ } ++ ++ ++ if(deptsiz.b.pktcnt > 0) { ++ deptsiz.b.xfersize = dwc_ep->xfer_len - (dwc_ep->pkt_cnt - deptsiz.b.pktcnt) * dwc_ep->maxpacket; ++ } else { ++ deptsiz.b.xfersize = 0; ++ deptsiz.b.pktcnt = 0; ++ } ++ ++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz, deptsiz.d32); ++ ++ if(deptsiz.b.pktcnt > 0) { ++ if(dwc_ep->proc_buf_num) { ++ dma_addr = dwc_ep->dma_addr1 + dwc_ep->xfer_len - deptsiz.b.xfersize; ++ } else { ++ dma_addr = dwc_ep->dma_addr0 + dwc_ep->xfer_len - deptsiz.b.xfersize;; ++ } ++ ++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepdma, dma_addr); ++ ++ /** Re-enable endpoint, clear nak */ ++ depctl.d32 = 0; ++ depctl.b.epena = 1; ++ depctl.b.cnak = 1; ++ ++ dwc_modify_reg32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl, ++ depctl.d32,depctl.d32); ++ return 0; ++ } else { ++ return 1; ++ } ++} ++ ++/** ++ * This function sets iso packets information(PTI mode) ++ * ++ * @param core_if Programming view of DWC_otg controller. ++ * @param ep The EP to start the transfer on. ++ * ++ */ ++static uint32_t set_iso_pkts_info(dwc_otg_core_if_t *core_if, dwc_ep_t *ep) ++{ ++ int i, j; ++ dma_addr_t dma_ad; ++ iso_pkt_info_t *packet_info = ep->pkt_info; ++ uint32_t offset; ++ uint32_t frame_data; ++ deptsiz_data_t deptsiz; ++ ++ if(ep->proc_buf_num == 0) { ++ /** Buffer 0 descriptors setup */ ++ dma_ad = ep->dma_addr0; ++ } ++ else { ++ /** Buffer 1 descriptors setup */ ++ dma_ad = ep->dma_addr1; ++ } ++ ++ ++ if(ep->is_in) { ++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz); ++ } else { ++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[ep->num]->doeptsiz); ++ } ++ ++ if(!deptsiz.b.xfersize) { ++ offset = 0; ++ for(i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm) ++ { ++ frame_data = ep->data_per_frame; ++ for(j = 0; j < ep->pkt_per_frm; ++j) { ++ ++ /* Packet status - is not set as initially ++ * it is set to 0 and if packet was sent ++ successfully, status field will remain 0*/ ++ ++ ++ /* Bytes has been transfered */ ++ packet_info->length = (ep->maxpacket < frame_data) ? ++ ep->maxpacket : frame_data; ++ ++ /* Received packet offset */ ++ packet_info->offset = offset; ++ offset += packet_info->length; ++ frame_data -= packet_info->length; ++ ++ packet_info ++; ++ } ++ } ++ return 1; ++ } else { ++ /* This is a workaround for in case of Transfer Complete with ++ * PktDrpSts interrupts merging - in this case Transfer complete ++ * interrupt for Isoc Out Endpoint is asserted without PktDrpSts ++ * set and with DOEPTSIZ register non zero. Investigations showed, ++ * that this happens when Out packet is dropped, but because of ++ * interrupts merging during first interrupt handling PktDrpSts ++ * bit is cleared and for next merged interrupts it is not reset. ++ * In this case SW hadles the interrupt as if PktDrpSts bit is set. ++ */ ++ if(ep->is_in) { ++ return 1; ++ } else { ++ return handle_iso_out_pkt_dropped(core_if, ep); ++ } ++ } ++} ++ ++/** ++ * This function is to handle Iso EP transfer complete interrupt ++ * ++ * @param ep The EP for which transfer complete was asserted ++ * ++ */ ++static void complete_iso_ep(dwc_otg_pcd_ep_t *ep) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd); ++ dwc_ep_t *dwc_ep = &ep->dwc_ep; ++ uint8_t is_last = 0; ++ ++ if(core_if->dma_enable) { ++ if(core_if->dma_desc_enable) { ++ set_ddma_iso_pkts_info(core_if, dwc_ep); ++ reinit_ddma_iso_xfer(core_if, dwc_ep); ++ is_last = 1; ++ } else { ++ if(core_if->pti_enh_enable) { ++ if(set_iso_pkts_info(core_if, dwc_ep)) { ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ dwc_otg_iso_ep_start_buf_transfer(core_if, dwc_ep); ++ is_last = 1; ++ } ++ } else { ++ set_current_pkt_info(core_if, dwc_ep); ++ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ is_last = 1; ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ if(dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; ++ } ++ ++ } ++ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep); ++ } ++ } ++ } else { ++ set_current_pkt_info(core_if, dwc_ep); ++ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ is_last = 1; ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ if(dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; ++ } ++ ++ } ++ dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep); ++ } ++ if(is_last) ++ dwc_otg_iso_buffer_done(ep, ep->iso_req); ++} ++ ++#endif //DWC_EN_ISOC ++ ++ ++/** ++ * This function handles EP0 Control transfers. ++ * ++ * The state of the control tranfers are tracked in ++ * <code>ep0state</code>. ++ */ ++static void handle_ep0(dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_pcd_ep_t *ep0 = &pcd->ep0; ++ desc_sts_data_t desc_sts; ++ deptsiz0_data_t deptsiz; ++ uint32_t byte_count; ++ ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); ++ print_ep0_state(pcd); ++#endif ++ ++ switch (pcd->ep0state) { ++ case EP0_DISCONNECT: ++ break; ++ ++ case EP0_IDLE: ++ pcd->request_config = 0; ++ ++ pcd_setup(pcd); ++ break; ++ ++ case EP0_IN_DATA_PHASE: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n", ++ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"), ++ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); ++#endif ++ ++ if (core_if->dma_enable != 0) { ++ /* ++ * For EP0 we can only program 1 packet at a time so we ++ * need to do the make calculations after each complete. ++ * Call write_packet to make the calculations, as in ++ * slave mode, and use those values to determine if we ++ * can complete. ++ */ ++ if(core_if->dma_desc_enable == 0) { ++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->in_ep_regs[0]->dieptsiz); ++ byte_count = ep0->dwc_ep.xfer_len - deptsiz.b.xfersize; ++ } ++ else { ++ desc_sts.d32 = readl(core_if->dev_if->in_desc_addr); ++ byte_count = ep0->dwc_ep.xfer_len - desc_sts.b.bytes; ++ } ++ ep0->dwc_ep.xfer_count += byte_count; ++ ep0->dwc_ep.xfer_buff += byte_count; ++ ep0->dwc_ep.dma_addr += byte_count; ++ } ++ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { ++ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep); ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } ++ else if(ep0->dwc_ep.sent_zlp) { ++ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ep0->dwc_ep.sent_zlp = 0; ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } ++ else { ++ ep0_complete_request(ep0); ++ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); ++ } ++ break; ++ case EP0_OUT_DATA_PHASE: ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n", ++ ep0->dwc_ep.num, (ep0->dwc_ep.is_in ?"IN":"OUT"), ++ ep0->dwc_ep.type, ep0->dwc_ep.maxpacket); ++#endif ++ if (core_if->dma_enable != 0) { ++ if(core_if->dma_desc_enable == 0) { ++ deptsiz.d32 = dwc_read_reg32(&core_if->dev_if->out_ep_regs[0]->doeptsiz); ++ byte_count = ep0->dwc_ep.maxpacket - deptsiz.b.xfersize; ++ } ++ else { ++ desc_sts.d32 = readl(core_if->dev_if->out_desc_addr); ++ byte_count = ep0->dwc_ep.maxpacket - desc_sts.b.bytes; ++ } ++ ep0->dwc_ep.xfer_count += byte_count; ++ ep0->dwc_ep.xfer_buff += byte_count; ++ ep0->dwc_ep.dma_addr += byte_count; ++ } ++ if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) { ++ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep); ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } ++ else if(ep0->dwc_ep.sent_zlp) { ++ dwc_otg_ep0_continue_transfer (GET_CORE_IF(pcd), &ep0->dwc_ep); ++ ep0->dwc_ep.sent_zlp = 0; ++ DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n"); ++ } ++ else { ++ ep0_complete_request(ep0); ++ DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n"); ++ } ++ break; ++ ++ ++ case EP0_IN_STATUS_PHASE: ++ case EP0_OUT_STATUS_PHASE: ++ DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n"); ++ ep0_complete_request(ep0); ++ pcd->ep0state = EP0_IDLE; ++ ep0->stopped = 1; ++ ep0->dwc_ep.is_in = 0; /* OUT for next SETUP */ ++ ++ /* Prepare for more SETUP Packets */ ++ if(core_if->dma_enable) { ++ ep0_out_start(core_if, pcd); ++ } ++ break; ++ ++ case EP0_STALL: ++ DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n"); ++ break; ++ } ++#ifdef DEBUG_EP0 ++ print_ep0_state(pcd); ++#endif ++} ++ ++ ++/** ++ * Restart transfer ++ */ ++static void restart_transfer(dwc_otg_pcd_t *pcd, const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if; ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t dieptsiz = {.d32=0}; ++ dwc_otg_pcd_ep_t *ep; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++#ifdef DWC_EN_ISOC ++ if(ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) { ++ return; ++ } ++#endif /* DWC_EN_ISOC */ ++ ++ core_if = GET_CORE_IF(pcd); ++ dev_if = core_if->dev_if; ++ ++ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz); ++ ++ DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x xfer_len=%0x" ++ " stopped=%d\n", ep->dwc_ep.xfer_buff, ++ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len , ++ ep->stopped); ++ /* ++ * If xfersize is 0 and pktcnt in not 0, resend the last packet. ++ */ ++ if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 && ++ ep->dwc_ep.start_xfer_buff != 0) { ++ if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) { ++ ep->dwc_ep.xfer_count = 0; ++ ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff; ++ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; ++ } ++ else { ++ ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket; ++ /* convert packet size to dwords. */ ++ ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket; ++ ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count; ++ } ++ ep->stopped = 0; ++ DWC_DEBUGPL(DBG_PCD,"xfer_buff=%p xfer_count=%0x " ++ "xfer_len=%0x stopped=%d\n", ++ ep->dwc_ep.xfer_buff, ++ ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len , ++ ep->stopped ++ ); ++ if (epnum == 0) { ++ dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep); ++ } ++ else { ++ dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); ++ } ++ } ++} ++ ++ ++/** ++ * handle the IN EP disable interrupt. ++ */ ++static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t *pcd, ++ const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ deptsiz_data_t dieptsiz = {.d32=0}; ++ dctl_data_t dctl = {.d32=0}; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ ep = get_in_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++ if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); ++ return; ++ } ++ ++ DWC_DEBUGPL(DBG_PCD,"diepctl%d=%0x\n", epnum, ++ dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl)); ++ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->dieptsiz); ++ ++ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", ++ dieptsiz.b.pktcnt, ++ dieptsiz.b.xfersize); ++ ++ if (ep->stopped) { ++ /* Flush the Tx FIFO */ ++ dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num); ++ /* Clear the Global IN NP NAK */ ++ dctl.d32 = 0; ++ dctl.b.cgnpinnak = 1; ++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, ++ dctl.d32, 0); ++ /* Restart the transaction */ ++ if (dieptsiz.b.pktcnt != 0 || ++ dieptsiz.b.xfersize != 0) { ++ restart_transfer(pcd, epnum); ++ } ++ } ++ else { ++ /* Restart the transaction */ ++ if (dieptsiz.b.pktcnt != 0 || ++ dieptsiz.b.xfersize != 0) { ++ restart_transfer(pcd, epnum); ++ } ++ DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n"); ++ } ++} ++ ++/** ++ * Handler for the IN EP timeout handshake interrupt. ++ */ ++static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t *pcd, ++ const uint32_t epnum) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ ++#ifdef DEBUG ++ deptsiz_data_t dieptsiz = {.d32=0}; ++ uint32_t num = 0; ++#endif ++ dctl_data_t dctl = {.d32=0}; ++ dwc_otg_pcd_ep_t *ep; ++ ++ gintmsk_data_t intr_mask = {.d32 = 0}; ++ ++ ep = get_in_ep(pcd, epnum); ++ ++ /* Disable the NP Tx Fifo Empty Interrrupt */ ++ if (!core_if->dma_enable) { ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0); ++ } ++ /** @todo NGS Check EP type. ++ * Implement for Periodic EPs */ ++ /* ++ * Non-periodic EP ++ */ ++ /* Enable the Global IN NAK Effective Interrupt */ ++ intr_mask.b.ginnakeff = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, ++ 0, intr_mask.d32); ++ ++ /* Set Global IN NAK */ ++ dctl.b.sgnpinnak = 1; ++ dwc_modify_reg32(&dev_if->dev_global_regs->dctl, ++ dctl.d32, dctl.d32); ++ ++ ep->stopped = 1; ++ ++#ifdef DEBUG ++ dieptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[num]->dieptsiz); ++ DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n", ++ dieptsiz.b.pktcnt, ++ dieptsiz.b.xfersize); ++#endif ++ ++#ifdef DISABLE_PERIODIC_EP ++ /* ++ * Set the NAK bit for this EP to ++ * start the disable process. ++ */ ++ diepctl.d32 = 0; ++ diepctl.b.snak = 1; ++ dwc_modify_reg32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32, diepctl.d32); ++ ep->disabling = 1; ++ ep->stopped = 1; ++#endif ++} ++ ++/** ++ * Handler for the IN EP NAK interrupt. ++ */ ++static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t *pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t* core_if; ++ diepmsk_data_t intr_mask = { .d32 = 0}; ++ ++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "IN EP NAK"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nak = 1; ++ ++ if(core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepeachintmsk[epnum], ++ intr_mask.d32, 0); ++ } else { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->diepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP Babble interrupt. ++ */ ++static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t *pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t* core_if; ++ doepmsk_data_t intr_mask = { .d32 = 0}; ++ ++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP Babble"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.babble = 1; ++ ++ if(core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum], ++ intr_mask.d32, 0); ++ } else { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP NAK interrupt. ++ */ ++static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t *pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t* core_if; ++ doepmsk_data_t intr_mask = { .d32 = 0}; ++ ++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NAK"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nak = 1; ++ ++ if(core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum], ++ intr_mask.d32, 0); ++ } else { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * Handler for the OUT EP NYET interrupt. ++ */ ++static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t *pcd, ++ const uint32_t epnum) ++{ ++ /** @todo implement ISR */ ++ dwc_otg_core_if_t* core_if; ++ doepmsk_data_t intr_mask = { .d32 = 0}; ++ ++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET"); ++ core_if = GET_CORE_IF(pcd); ++ intr_mask.b.nyet = 1; ++ ++ if(core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepeachintmsk[epnum], ++ intr_mask.d32, 0); ++ } else { ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->doepmsk, ++ intr_mask.d32, 0); ++ } ++ ++ return 1; ++} ++ ++/** ++ * This interrupt indicates that an IN EP has a pending Interrupt. ++ * The sequence for handling the IN EP interrupt is shown below: ++ * -# Read the Device All Endpoint Interrupt register ++ * -# Repeat the following for each IN EP interrupt bit set (from ++ * LSB to MSB). ++ * -# Read the Device Endpoint Interrupt (DIEPINTn) register ++ * -# If "Transfer Complete" call the request complete function ++ * -# If "Endpoint Disabled" complete the EP disable procedure. ++ * -# If "AHB Error Interrupt" log error ++ * -# If "Time-out Handshake" log error ++ * -# If "IN Token Received when TxFIFO Empty" write packet to Tx ++ * FIFO. ++ * -# If "IN Token EP Mismatch" (disable, this is handled by EP ++ * Mismatch Interrupt) ++ */ ++static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t *pcd) ++{ ++#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \ ++do { \ ++ diepint_data_t diepint = {.d32=0}; \ ++ diepint.b.__intr = 1; \ ++ dwc_write_reg32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \ ++ diepint.d32); \ ++} while (0) ++ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ diepint_data_t diepint = {.d32=0}; ++ dctl_data_t dctl = {.d32=0}; ++ depctl_data_t depctl = {.d32=0}; ++ uint32_t ep_intr; ++ uint32_t epnum = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ gintmsk_data_t intr_mask = {.d32 = 0}; ++ ++ ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd); ++ ++ /* Read in the device interrupt bits */ ++ ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if); ++ ++ /* Service the Device IN interrupts for each endpoint */ ++ while(ep_intr) { ++ if (ep_intr&0x1) { ++ uint32_t empty_msk; ++ /* Get EP pointer */ ++ ep = get_in_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl); ++ empty_msk = dwc_read_reg32(&dev_if->dev_global_regs->dtknqr4_fifoemptymsk); ++ ++ DWC_DEBUGPL(DBG_PCDV, ++ "IN EP INTERRUPT - %d\nepmty_msk - %8x diepctl - %8x\n", ++ epnum, ++ empty_msk, ++ depctl.d32); ++ ++ DWC_DEBUGPL(DBG_PCD, ++ "EP%d-%s: type=%d, mps=%d\n", ++ dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"), ++ dwc_ep->type, dwc_ep->maxpacket); ++ ++ diepint.d32 = dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep); ++ ++ DWC_DEBUGPL(DBG_PCDV, "EP %d Interrupt Register - 0x%x\n", epnum, diepint.d32); ++ /* Transfer complete */ ++ if (diepint.b.xfercompl) { ++ /* Disable the NP Tx FIFO Empty ++ * Interrrupt */ ++ if(core_if->en_multiple_tx_fifo == 0) { ++ intr_mask.b.nptxfempty = 1; ++ dwc_modify_reg32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0); ++ } ++ else { ++ /* Disable the Tx FIFO Empty Interrupt for this EP */ ++ uint32_t fifoemptymsk = 0x1 << dwc_ep->num; ++ dwc_modify_reg32(&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk, ++ fifoemptymsk, 0); ++ } ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if,epnum,xfercompl); ++ ++ /* Complete the transfer */ ++ if (epnum == 0) { ++ handle_ep0(pcd); ++ } ++#ifdef DWC_EN_ISOC ++ else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if(!ep->stopped) ++ complete_iso_ep(ep); ++ } ++#endif //DWC_EN_ISOC ++ else { ++ ++ complete_ep(ep); ++ } ++ } ++ /* Endpoint disable */ ++ if (diepint.b.epdisabled) { ++ DWC_DEBUGPL(DBG_ANY,"EP%d IN disabled\n", epnum); ++ handle_in_ep_disable_intr(pcd, epnum); ++ ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if,epnum,epdisabled); ++ } ++ /* AHB Error */ ++ if (diepint.b.ahberr) { ++ DWC_DEBUGPL(DBG_ANY,"EP%d IN AHB Error\n", epnum); ++ /* Clear the bit in DIEPINTn for this interrupt */ ++ CLEAR_IN_EP_INTR(core_if,epnum,ahberr); ++ } ++ /* TimeOUT Handshake (non-ISOC IN EPs) */ ++ if (diepint.b.timeout) { ++ DWC_DEBUGPL(DBG_ANY,"EP%d IN Time-out\n", epnum); ++ handle_in_ep_timeout_intr(pcd, epnum); ++ ++ CLEAR_IN_EP_INTR(core_if,epnum,timeout); ++ } ++ /** IN Token received with TxF Empty */ ++ if (diepint.b.intktxfemp) { ++ DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN TxFifo Empty\n", ++ epnum); ++ if (!ep->stopped && epnum != 0) { ++ ++ diepmsk_data_t diepmsk = { .d32 = 0}; ++ diepmsk.b.intktxfemp = 1; ++ ++ if(core_if->multiproc_int_enable) { ++ dwc_modify_reg32(&dev_if->dev_global_regs->diepeachintmsk[epnum], ++ diepmsk.d32, 0); ++ } else { ++ dwc_modify_reg32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32, 0); ++ } ++ start_next_request(ep); ++ } ++ else if(core_if->dma_desc_enable && epnum == 0 && ++ pcd->ep0state == EP0_OUT_STATUS_PHASE) { ++ // EP0 IN set STALL ++ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[epnum]->diepctl); ++ ++ /* set the disable and stall bits */ ++ if (depctl.b.epena) { ++ depctl.b.epdis = 1; ++ } ++ depctl.b.stall = 1; ++ dwc_write_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32); ++ } ++ CLEAR_IN_EP_INTR(core_if,epnum,intktxfemp); ++ } ++ /** IN Token Received with EP mismatch */ ++ if (diepint.b.intknepmis) { ++ DWC_DEBUGPL(DBG_ANY,"EP%d IN TKN EP Mismatch\n", epnum); ++ CLEAR_IN_EP_INTR(core_if,epnum,intknepmis); ++ } ++ /** IN Endpoint NAK Effective */ ++ if (diepint.b.inepnakeff) { ++ DWC_DEBUGPL(DBG_ANY,"EP%d IN EP NAK Effective\n", epnum); ++ /* Periodic EP */ ++ if (ep->disabling) { ++ depctl.d32 = 0; ++ depctl.b.snak = 1; ++ depctl.b.epdis = 1; ++ dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32); ++ } ++ CLEAR_IN_EP_INTR(core_if,epnum,inepnakeff); ++ ++ } ++ ++ /** IN EP Tx FIFO Empty Intr */ ++ if (diepint.b.emptyintr) { ++ DWC_DEBUGPL(DBG_ANY,"EP%d Tx FIFO Empty Intr \n", epnum); ++ write_empty_tx_fifo(pcd, epnum); ++ ++ CLEAR_IN_EP_INTR(core_if,epnum,emptyintr); ++ ++ } ++ ++ /** IN EP BNA Intr */ ++ if (diepint.b.bna) { ++ CLEAR_IN_EP_INTR(core_if,epnum,bna); ++ if(core_if->dma_desc_enable) { ++#ifdef DWC_EN_ISOC ++ if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This checking is performed to prevent first "false" BNA ++ * handling occuring right after reconnect ++ */ ++ if(dwc_ep->next_frame != 0xffffffff) ++ dwc_otg_pcd_handle_iso_bna(ep); ++ } ++ else ++#endif //DWC_EN_ISOC ++ { ++ dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl); ++ ++ /* If Global Continue on BNA is disabled - disable EP */ ++ if(!dctl.b.gcontbna) { ++ depctl.d32 = 0; ++ depctl.b.snak = 1; ++ depctl.b.epdis = 1; ++ dwc_modify_reg32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32, depctl.d32); ++ } else { ++ start_next_request(ep); ++ } ++ } ++ } ++ } ++ /* NAK Interrutp */ ++ if (diepint.b.nak) { ++ DWC_DEBUGPL(DBG_ANY,"EP%d IN NAK Interrupt\n", epnum); ++ handle_in_ep_nak_intr(pcd, epnum); ++ ++ CLEAR_IN_EP_INTR(core_if,epnum,nak); ++ } ++ } ++ epnum++; ++ ep_intr >>=1; ++ } ++ ++ return 1; ++#undef CLEAR_IN_EP_INTR ++} ++ ++/** ++ * This interrupt indicates that an OUT EP has a pending Interrupt. ++ * The sequence for handling the OUT EP interrupt is shown below: ++ * -# Read the Device All Endpoint Interrupt register ++ * -# Repeat the following for each OUT EP interrupt bit set (from ++ * LSB to MSB). ++ * -# Read the Device Endpoint Interrupt (DOEPINTn) register ++ * -# If "Transfer Complete" call the request complete function ++ * -# If "Endpoint Disabled" complete the EP disable procedure. ++ * -# If "AHB Error Interrupt" log error ++ * -# If "Setup Phase Done" process Setup Packet (See Standard USB ++ * Command Processing) ++ */ ++static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t *pcd) ++{ ++#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \ ++do { \ ++ doepint_data_t doepint = {.d32=0}; \ ++ doepint.b.__intr = 1; \ ++ dwc_write_reg32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \ ++ doepint.d32); \ ++} while (0) ++ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++ dwc_otg_dev_if_t *dev_if = core_if->dev_if; ++ uint32_t ep_intr; ++ doepint_data_t doepint = {.d32=0}; ++ dctl_data_t dctl = {.d32=0}; ++ depctl_data_t doepctl = {.d32=0}; ++ uint32_t epnum = 0; ++ dwc_otg_pcd_ep_t *ep; ++ dwc_ep_t *dwc_ep; ++ ++ DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__); ++ ++ /* Read in the device interrupt bits */ ++ ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if); ++ ++ while(ep_intr) { ++ if (ep_intr&0x1) { ++ /* Get EP pointer */ ++ ep = get_out_ep(pcd, epnum); ++ dwc_ep = &ep->dwc_ep; ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, ++ "EP%d-%s: type=%d, mps=%d\n", ++ dwc_ep->num, (dwc_ep->is_in ?"IN":"OUT"), ++ dwc_ep->type, dwc_ep->maxpacket); ++#endif ++ doepint.d32 = dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep); ++ ++ /* Transfer complete */ ++ if (doepint.b.xfercompl) { ++ ++ if (epnum == 0) { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl); ++ if(core_if->dma_desc_enable == 0 || pcd->ep0state != EP0_IDLE) ++ handle_ep0(pcd); ++#ifdef DWC_EN_ISOC ++ } else if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ if (doepint.b.pktdrpsts == 0) { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl); ++ complete_iso_ep(ep); ++ } else { ++ ++ doepint_data_t doepint = {.d32=0}; ++ doepint.b.xfercompl = 1; ++ doepint.b.pktdrpsts = 1; ++ dwc_write_reg32(&core_if->dev_if->out_ep_regs[epnum]->doepint, ++ doepint.d32); ++ if(handle_iso_out_pkt_dropped(core_if,dwc_ep)) { ++ complete_iso_ep(ep); ++ } ++ } ++#endif //DWC_EN_ISOC ++ } else { ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if,epnum,xfercompl); ++ complete_ep(ep); ++ } ++ ++ } ++ ++ /* Endpoint disable */ ++ if (doepint.b.epdisabled) { ++ ++ /* Clear the bit in DOEPINTn for this interrupt */ ++ CLEAR_OUT_EP_INTR(core_if,epnum,epdisabled); ++ } ++ /* AHB Error */ ++ if (doepint.b.ahberr) { ++ DWC_DEBUGPL(DBG_PCD,"EP%d OUT AHB Error\n", epnum); ++ DWC_DEBUGPL(DBG_PCD,"EP DMA REG %d \n", core_if->dev_if->out_ep_regs[epnum]->doepdma); ++ CLEAR_OUT_EP_INTR(core_if,epnum,ahberr); ++ } ++ /* Setup Phase Done (contorl EPs) */ ++ if (doepint.b.setup) { ++#ifdef DEBUG_EP0 ++ DWC_DEBUGPL(DBG_PCD,"EP%d SETUP Done\n", ++ epnum); ++#endif ++ CLEAR_OUT_EP_INTR(core_if,epnum,setup); ++ ++ handle_ep0(pcd); ++ } ++ ++ /** OUT EP BNA Intr */ ++ if (doepint.b.bna) { ++ CLEAR_OUT_EP_INTR(core_if,epnum,bna); ++ if(core_if->dma_desc_enable) { ++#ifdef DWC_EN_ISOC ++ if(dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) { ++ /* ++ * This checking is performed to prevent first "false" BNA ++ * handling occuring right after reconnect ++ */ ++ if(dwc_ep->next_frame != 0xffffffff) ++ dwc_otg_pcd_handle_iso_bna(ep); ++ } ++ else ++#endif //DWC_EN_ISOC ++ { ++ dctl.d32 = dwc_read_reg32(&dev_if->dev_global_regs->dctl); ++ ++ /* If Global Continue on BNA is disabled - disable EP*/ ++ if(!dctl.b.gcontbna) { ++ doepctl.d32 = 0; ++ doepctl.b.snak = 1; ++ doepctl.b.epdis = 1; ++ dwc_modify_reg32(&dev_if->out_ep_regs[epnum]->doepctl, doepctl.d32, doepctl.d32); ++ } else { ++ start_next_request(ep); ++ } ++ } ++ } ++ } ++ if (doepint.b.stsphsercvd) { ++ CLEAR_OUT_EP_INTR(core_if,epnum,stsphsercvd); ++ if(core_if->dma_desc_enable) { ++ do_setup_in_status_phase(pcd); ++ } ++ } ++ /* Babble Interrutp */ ++ if (doepint.b.babble) { ++ DWC_DEBUGPL(DBG_ANY,"EP%d OUT Babble\n", epnum); ++ handle_out_ep_babble_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if,epnum,babble); ++ } ++ /* NAK Interrutp */ ++ if (doepint.b.nak) { ++ DWC_DEBUGPL(DBG_ANY,"EP%d OUT NAK\n", epnum); ++ handle_out_ep_nak_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if,epnum,nak); ++ } ++ /* NYET Interrutp */ ++ if (doepint.b.nyet) { ++ DWC_DEBUGPL(DBG_ANY,"EP%d OUT NYET\n", epnum); ++ handle_out_ep_nyet_intr(pcd, epnum); ++ ++ CLEAR_OUT_EP_INTR(core_if,epnum,nyet); ++ } ++ } ++ ++ epnum++; ++ ep_intr >>=1; ++ } ++ ++ return 1; ++ ++#undef CLEAR_OUT_EP_INTR ++} ++ ++ ++/** ++ * Incomplete ISO IN Transfer Interrupt. ++ * This interrupt indicates one of the following conditions occurred ++ * while transmitting an ISOC transaction. ++ * - Corrupted IN Token for ISOC EP. ++ * - Packet not complete in FIFO. ++ * The follow actions will be taken: ++ * -# Determine the EP ++ * -# Set incomplete flag in dwc_ep structure ++ * -# Disable EP; when "Endpoint Disabled" interrupt is received ++ * Flush FIFO ++ */ ++int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t *pcd) ++{ ++ gintsts_data_t gintsts; ++ ++ ++#ifdef DWC_EN_ISOC ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t deptsiz = { .d32 = 0}; ++ depctl_data_t depctl = { .d32 = 0}; ++ dsts_data_t dsts = { .d32 = 0}; ++ dwc_ep_t *dwc_ep; ++ int i; ++ ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ for(i = 1; i <= dev_if->num_in_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i].dwc_ep; ++ if(dwc_ep->active && ++ dwc_ep->type == USB_ENDPOINT_XFER_ISOC) ++ { ++ deptsiz.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->dieptsiz); ++ depctl.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl); ++ ++ if(depctl.b.epdis && deptsiz.d32) { ++ set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep); ++ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ ++ if(dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; ++ } ++ ++ } ++ ++ dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts); ++ dwc_ep->next_frame = dsts.b.soffn; ++ ++ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep); ++ } ++ } ++ } ++ ++#else ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", ++ "IN ISOC Incomplete"); ++ ++ intr_mask.b.incomplisoin = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++#endif //DWC_EN_ISOC ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.incomplisoin = 1; ++ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * Incomplete ISO OUT Transfer Interrupt. ++ * ++ * This interrupt indicates that the core has dropped an ISO OUT ++ * packet. The following conditions can be the cause: ++ * - FIFO Full, the entire packet would not fit in the FIFO. ++ * - CRC Error ++ * - Corrupted Token ++ * The follow actions will be taken: ++ * -# Determine the EP ++ * -# Set incomplete flag in dwc_ep structure ++ * -# Read any data from the FIFO ++ * -# Disable EP. when "Endpoint Disabled" interrupt is received ++ * re-enable EP. ++ */ ++int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t *pcd) ++{ ++ /* @todo implement ISR */ ++ gintsts_data_t gintsts; ++ ++#ifdef DWC_EN_ISOC ++ dwc_otg_dev_if_t *dev_if; ++ deptsiz_data_t deptsiz = { .d32 = 0}; ++ depctl_data_t depctl = { .d32 = 0}; ++ dsts_data_t dsts = { .d32 = 0}; ++ dwc_ep_t *dwc_ep; ++ int i; ++ ++ dev_if = GET_CORE_IF(pcd)->dev_if; ++ ++ for(i = 1; i <= dev_if->num_out_eps; ++i) { ++ dwc_ep = &pcd->in_ep[i].dwc_ep; ++ if(pcd->out_ep[i].dwc_ep.active && ++ pcd->out_ep[i].dwc_ep.type == USB_ENDPOINT_XFER_ISOC) ++ { ++ deptsiz.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doeptsiz); ++ depctl.d32 = dwc_read_reg32(&dev_if->out_ep_regs[i]->doepctl); ++ ++ if(depctl.b.epdis && deptsiz.d32) { ++ set_current_pkt_info(GET_CORE_IF(pcd), &pcd->out_ep[i].dwc_ep); ++ if(dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) { ++ dwc_ep->cur_pkt = 0; ++ dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1; ++ ++ if(dwc_ep->proc_buf_num) { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1; ++ } else { ++ dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0; ++ dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0; ++ } ++ ++ } ++ ++ dsts.d32 = dwc_read_reg32(&GET_CORE_IF(pcd)->dev_if->dev_global_regs->dsts); ++ dwc_ep->next_frame = dsts.b.soffn; ++ ++ dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF(pcd), dwc_ep); ++ } ++ } ++ } ++#else ++ /** @todo implement ISR */ ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ ++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", ++ "OUT ISOC Incomplete"); ++ ++ intr_mask.b.incomplisoout = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++#endif // DWC_EN_ISOC ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.incomplisoout = 1; ++ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * This function handles the Global IN NAK Effective interrupt. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if; ++ depctl_data_t diepctl = { .d32 = 0}; ++ depctl_data_t diepctl_rd = { .d32 = 0}; ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ gintsts_data_t gintsts; ++ int i; ++ ++ DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n"); ++ ++ /* Disable all active IN EPs */ ++ diepctl.b.epdis = 1; ++ diepctl.b.snak = 1; ++ ++ for (i=0; i <= dev_if->num_in_eps; i++) ++ { ++ diepctl_rd.d32 = dwc_read_reg32(&dev_if->in_ep_regs[i]->diepctl); ++ if (diepctl_rd.b.epena) { ++ dwc_write_reg32(&dev_if->in_ep_regs[i]->diepctl, ++ diepctl.d32); ++ } ++ } ++ /* Disable the Global IN NAK Effective Interrupt */ ++ intr_mask.b.ginnakeff = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.ginnakeff = 1; ++ dwc_write_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++/** ++ * OUT NAK Effective. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t *pcd) ++{ ++ gintmsk_data_t intr_mask = { .d32 = 0}; ++ gintsts_data_t gintsts; ++ ++ DWC_PRINT("INTERRUPT Handler not implemented for %s\n", ++ "Global IN NAK Effective\n"); ++ /* Disable the Global IN NAK Effective Interrupt */ ++ intr_mask.b.goutnakeff = 1; ++ dwc_modify_reg32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk, ++ intr_mask.d32, 0); ++ ++ /* Clear interrupt */ ++ gintsts.d32 = 0; ++ gintsts.b.goutnakeff = 1; ++ dwc_write_reg32 (&GET_CORE_IF(pcd)->core_global_regs->gintsts, ++ gintsts.d32); ++ ++ return 1; ++} ++ ++ ++/** ++ * PCD interrupt handler. ++ * ++ * The PCD handles the device interrupts. Many conditions can cause a ++ * device interrupt. When an interrupt occurs, the device interrupt ++ * service routine determines the cause of the interrupt and ++ * dispatches handling to the appropriate function. These interrupt ++ * handling functions are described below. ++ * ++ * All interrupt registers are processed from LSB to MSB. ++ * ++ */ ++int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t *pcd) ++{ ++ dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd); ++#ifdef VERBOSE ++ dwc_otg_core_global_regs_t *global_regs = ++ core_if->core_global_regs; ++#endif ++ gintsts_data_t gintr_status; ++ int32_t retval = 0; ++ ++ ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x gintmsk=%08x\n", ++ __func__, ++ dwc_read_reg32(&global_regs->gintsts), ++ dwc_read_reg32(&global_regs->gintmsk)); ++#endif ++ ++ if (dwc_otg_is_device_mode(core_if)) { ++ SPIN_LOCK(&pcd->lock); ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x gintmsk=%08x\n", ++ __func__, ++ dwc_read_reg32(&global_regs->gintsts), ++ dwc_read_reg32(&global_regs->gintmsk)); ++#endif ++ ++ gintr_status.d32 = dwc_otg_read_core_intr(core_if); ++ ++/* ++ if (!gintr_status.d32) { ++ SPIN_UNLOCK(&pcd->lock); ++ return 0; ++ } ++*/ ++ DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n", ++ __func__, gintr_status.d32); ++ ++ if (gintr_status.b.sofintr) { ++ retval |= dwc_otg_pcd_handle_sof_intr(pcd); ++ } ++ if (gintr_status.b.rxstsqlvl) { ++ retval |= dwc_otg_pcd_handle_rx_status_q_level_intr(pcd); ++ } ++ if (gintr_status.b.nptxfempty) { ++ retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd); ++ } ++ if (gintr_status.b.ginnakeff) { ++ retval |= dwc_otg_pcd_handle_in_nak_effective(pcd); ++ } ++ if (gintr_status.b.goutnakeff) { ++ retval |= dwc_otg_pcd_handle_out_nak_effective(pcd); ++ } ++ if (gintr_status.b.i2cintr) { ++ retval |= dwc_otg_pcd_handle_i2c_intr(pcd); ++ } ++ if (gintr_status.b.erlysuspend) { ++ retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd); ++ } ++ if (gintr_status.b.usbreset) { ++ retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd); ++ } ++ if (gintr_status.b.enumdone) { ++ retval |= dwc_otg_pcd_handle_enum_done_intr(pcd); ++ } ++ if (gintr_status.b.isooutdrop) { ++ retval |= dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(pcd); ++ } ++ if (gintr_status.b.eopframe) { ++ retval |= dwc_otg_pcd_handle_end_periodic_frame_intr(pcd); ++ } ++ if (gintr_status.b.epmismatch) { ++ retval |= dwc_otg_pcd_handle_ep_mismatch_intr(core_if); ++ } ++ if (gintr_status.b.inepint) { ++ if(!core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); ++ } ++ } ++ if (gintr_status.b.outepintr) { ++ if(!core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); ++ } ++ } ++ if (gintr_status.b.incomplisoin) { ++ retval |= dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd); ++ } ++ if (gintr_status.b.incomplisoout) { ++ retval |= dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd); ++ } ++ ++ /* In MPI mode De vice Endpoints intterrupts are asserted ++ * without setting outepintr and inepint bits set, so these ++ * Interrupt handlers are called without checking these bit-fields ++ */ ++ if(core_if->multiproc_int_enable) { ++ retval |= dwc_otg_pcd_handle_in_ep_intr(pcd); ++ retval |= dwc_otg_pcd_handle_out_ep_intr(pcd); ++ } ++#ifdef VERBOSE ++ DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__, ++ dwc_read_reg32(&global_regs->gintsts)); ++#endif ++ SPIN_UNLOCK(&pcd->lock); ++ } ++ ++ S3C2410X_CLEAR_EINTPEND(); ++ ++ return retval; ++} ++ ++#endif /* DWC_HOST_ONLY */ +diff --git a/drivers/usb/dwc_otg/dwc_otg_regs.h b/drivers/usb/dwc_otg/dwc_otg_regs.h +new file mode 100644 +index 0000000..8265766 +--- /dev/null ++++ b/drivers/usb/dwc_otg/dwc_otg_regs.h +@@ -0,0 +1,2075 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $ ++ * $Revision: 1.2 $ ++ * $Date: 2008-11-21 05:39:15 $ ++ * $Change: 1099526 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#ifndef __DWC_OTG_REGS_H__ ++#define __DWC_OTG_REGS_H__ ++ ++/** ++ * @file ++ * ++ * This file contains the data structures for accessing the DWC_otg core registers. ++ * ++ * The application interfaces with the HS OTG core by reading from and ++ * writing to the Control and Status Register (CSR) space through the ++ * AHB Slave interface. These registers are 32 bits wide, and the ++ * addresses are 32-bit-block aligned. ++ * CSRs are classified as follows: ++ * - Core Global Registers ++ * - Device Mode Registers ++ * - Device Global Registers ++ * - Device Endpoint Specific Registers ++ * - Host Mode Registers ++ * - Host Global Registers ++ * - Host Port CSRs ++ * - Host Channel Specific Registers ++ * ++ * Only the Core Global registers can be accessed in both Device and ++ * Host modes. When the HS OTG core is operating in one mode, either ++ * Device or Host, the application must not access registers from the ++ * other mode. When the core switches from one mode to another, the ++ * registers in the new mode of operation must be reprogrammed as they ++ * would be after a power-on reset. ++ */ ++ ++/** Maximum number of Periodic FIFOs */ ++#define MAX_PERIO_FIFOS 15 ++/** Maximum number of Transmit FIFOs */ ++#define MAX_TX_FIFOS 15 ++ ++/** Maximum number of Endpoints/HostChannels */ ++#define MAX_EPS_CHANNELS 16 ++ ++/****************************************************************************/ ++/** DWC_otg Core registers . ++ * The dwc_otg_core_global_regs structure defines the size ++ * and relative field offsets for the Core Global registers. ++ */ ++typedef struct dwc_otg_core_global_regs ++{ ++ /** OTG Control and Status Register. <i>Offset: 000h</i> */ ++ volatile uint32_t gotgctl; ++ /** OTG Interrupt Register. <i>Offset: 004h</i> */ ++ volatile uint32_t gotgint; ++ /**Core AHB Configuration Register. <i>Offset: 008h</i> */ ++ volatile uint32_t gahbcfg; ++ ++#define DWC_GLBINTRMASK 0x0001 ++#define DWC_DMAENABLE 0x0020 ++#define DWC_NPTXEMPTYLVL_EMPTY 0x0080 ++#define DWC_NPTXEMPTYLVL_HALFEMPTY 0x0000 ++#define DWC_PTXEMPTYLVL_EMPTY 0x0100 ++#define DWC_PTXEMPTYLVL_HALFEMPTY 0x0000 ++ ++ /**Core USB Configuration Register. <i>Offset: 00Ch</i> */ ++ volatile uint32_t gusbcfg; ++ /**Core Reset Register. <i>Offset: 010h</i> */ ++ volatile uint32_t grstctl; ++ /**Core Interrupt Register. <i>Offset: 014h</i> */ ++ volatile uint32_t gintsts; ++ /**Core Interrupt Mask Register. <i>Offset: 018h</i> */ ++ volatile uint32_t gintmsk; ++ /**Receive Status Queue Read Register (Read Only). <i>Offset: 01Ch</i> */ ++ volatile uint32_t grxstsr; ++ /**Receive Status Queue Read & POP Register (Read Only). <i>Offset: 020h</i>*/ ++ volatile uint32_t grxstsp; ++ /**Receive FIFO Size Register. <i>Offset: 024h</i> */ ++ volatile uint32_t grxfsiz; ++ /**Non Periodic Transmit FIFO Size Register. <i>Offset: 028h</i> */ ++ volatile uint32_t gnptxfsiz; ++ /**Non Periodic Transmit FIFO/Queue Status Register (Read ++ * Only). <i>Offset: 02Ch</i> */ ++ volatile uint32_t gnptxsts; ++ /**I2C Access Register. <i>Offset: 030h</i> */ ++ volatile uint32_t gi2cctl; ++ /**PHY Vendor Control Register. <i>Offset: 034h</i> */ ++ volatile uint32_t gpvndctl; ++ /**General Purpose Input/Output Register. <i>Offset: 038h</i> */ ++ volatile uint32_t ggpio; ++ /**User ID Register. <i>Offset: 03Ch</i> */ ++ volatile uint32_t guid; ++ /**Synopsys ID Register (Read Only). <i>Offset: 040h</i> */ ++ volatile uint32_t gsnpsid; ++ /**User HW Config1 Register (Read Only). <i>Offset: 044h</i> */ ++ volatile uint32_t ghwcfg1; ++ /**User HW Config2 Register (Read Only). <i>Offset: 048h</i> */ ++ volatile uint32_t ghwcfg2; ++#define DWC_SLAVE_ONLY_ARCH 0 ++#define DWC_EXT_DMA_ARCH 1 ++#define DWC_INT_DMA_ARCH 2 ++ ++#define DWC_MODE_HNP_SRP_CAPABLE 0 ++#define DWC_MODE_SRP_ONLY_CAPABLE 1 ++#define DWC_MODE_NO_HNP_SRP_CAPABLE 2 ++#define DWC_MODE_SRP_CAPABLE_DEVICE 3 ++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE 4 ++#define DWC_MODE_SRP_CAPABLE_HOST 5 ++#define DWC_MODE_NO_SRP_CAPABLE_HOST 6 ++ ++ /**User HW Config3 Register (Read Only). <i>Offset: 04Ch</i> */ ++ volatile uint32_t ghwcfg3; ++ /**User HW Config4 Register (Read Only). <i>Offset: 050h</i>*/ ++ volatile uint32_t ghwcfg4; ++ /** Reserved <i>Offset: 054h-0FFh</i> */ ++ volatile uint32_t reserved[43]; ++ /** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */ ++ volatile uint32_t hptxfsiz; ++ /** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled, ++ otherwise Device Transmit FIFO#n Register. ++ * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */ ++ volatile uint32_t dptxfsiz_dieptxf[15]; ++} dwc_otg_core_global_regs_t; ++ ++/** ++ * This union represents the bit fields of the Core OTG Control ++ * and Status Register (GOTGCTL). Set the bits using the bit ++ * fields then write the <i>d32</i> value to the register. ++ */ ++typedef union gotgctl_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned sesreqscs : 1; ++ unsigned sesreq : 1; ++ unsigned reserved2_7 : 6; ++ unsigned hstnegscs : 1; ++ unsigned hnpreq : 1; ++ unsigned hstsethnpen : 1; ++ unsigned devhnpen : 1; ++ unsigned reserved12_15 : 4; ++ unsigned conidsts : 1; ++ unsigned reserved17 : 1; ++ unsigned asesvld : 1; ++ unsigned bsesvld : 1; ++ unsigned currmod : 1; ++ unsigned reserved21_31 : 11; ++ } b; ++} gotgctl_data_t; ++ ++/** ++ * This union represents the bit fields of the Core OTG Interrupt Register ++ * (GOTGINT). Set/clear the bits using the bit fields then write the <i>d32</i> ++ * value to the register. ++ */ ++typedef union gotgint_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** Current Mode */ ++ unsigned reserved0_1 : 2; ++ ++ /** Session End Detected */ ++ unsigned sesenddet : 1; ++ ++ unsigned reserved3_7 : 5; ++ ++ /** Session Request Success Status Change */ ++ unsigned sesreqsucstschng : 1; ++ /** Host Negotiation Success Status Change */ ++ unsigned hstnegsucstschng : 1; ++ ++ unsigned reserver10_16 : 7; ++ ++ /** Host Negotiation Detected */ ++ unsigned hstnegdet : 1; ++ /** A-Device Timeout Change */ ++ unsigned adevtoutchng : 1; ++ /** Debounce Done */ ++ unsigned debdone : 1; ++ ++ unsigned reserved31_20 : 12; ++ ++ } b; ++} gotgint_data_t; ++ ++ ++/** ++ * This union represents the bit fields of the Core AHB Configuration ++ * Register (GAHBCFG). Set/clear the bits using the bit fields then ++ * write the <i>d32</i> value to the register. ++ */ ++typedef union gahbcfg_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned glblintrmsk : 1; ++#define DWC_GAHBCFG_GLBINT_ENABLE 1 ++ ++ unsigned hburstlen : 4; ++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE 0 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR 1 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4 3 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8 5 ++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16 7 ++ ++ unsigned dmaenable : 1; ++#define DWC_GAHBCFG_DMAENABLE 1 ++ unsigned reserved : 1; ++ unsigned nptxfemplvl_txfemplvl : 1; ++ unsigned ptxfemplvl : 1; ++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY 1 ++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY 0 ++ unsigned reserved9_31 : 23; ++ } b; ++} gahbcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core USB Configuration ++ * Register (GUSBCFG). Set the bits using the bit fields then write ++ * the <i>d32</i> value to the register. ++ */ ++typedef union gusbcfg_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned toutcal : 3; ++ unsigned phyif : 1; ++ unsigned ulpi_utmi_sel : 1; ++ unsigned fsintf : 1; ++ unsigned physel : 1; ++ unsigned ddrsel : 1; ++ unsigned srpcap : 1; ++ unsigned hnpcap : 1; ++ unsigned usbtrdtim : 4; ++ unsigned nptxfrwnden : 1; ++ unsigned phylpwrclksel : 1; ++ unsigned otgutmifssel : 1; ++ unsigned ulpi_fsls : 1; ++ unsigned ulpi_auto_res : 1; ++ unsigned ulpi_clk_sus_m : 1; ++ unsigned ulpi_ext_vbus_drv : 1; ++ unsigned ulpi_int_vbus_indicator : 1; ++ unsigned term_sel_dl_pulse : 1; ++ unsigned reserved23_27 : 5; ++ unsigned tx_end_delay : 1; ++ unsigned reserved29_31 : 3; ++ } b; ++} gusbcfg_data_t; ++ ++/** ++ * This union represents the bit fields of the Core Reset Register ++ * (GRSTCTL). Set/clear the bits using the bit fields then write the ++ * <i>d32</i> value to the register. ++ */ ++typedef union grstctl_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** Core Soft Reset (CSftRst) (Device and Host) ++ * ++ * The application can flush the control logic in the ++ * entire core using this bit. This bit resets the ++ * pipelines in the AHB Clock domain as well as the ++ * PHY Clock domain. ++ * ++ * The state machines are reset to an IDLE state, the ++ * control bits in the CSRs are cleared, all the ++ * transmit FIFOs and the receive FIFO are flushed. ++ * ++ * The status mask bits that control the generation of ++ * the interrupt, are cleared, to clear the ++ * interrupt. The interrupt status bits are not ++ * cleared, so the application can get the status of ++ * any events that occurred in the core after it has ++ * set this bit. ++ * ++ * Any transactions on the AHB are terminated as soon ++ * as possible following the protocol. Any ++ * transactions on the USB are terminated immediately. ++ * ++ * The configuration settings in the CSRs are ++ * unchanged, so the software doesn't have to ++ * reprogram these registers (Device ++ * Configuration/Host Configuration/Core System ++ * Configuration/Core PHY Configuration). ++ * ++ * The application can write to this bit, any time it ++ * wants to reset the core. This is a self clearing ++ * bit and the core clears this bit after all the ++ * necessary logic is reset in the core, which may ++ * take several clocks, depending on the current state ++ * of the core. ++ */ ++ unsigned csftrst : 1; ++ /** Hclk Soft Reset ++ * ++ * The application uses this bit to reset the control logic in ++ * the AHB clock domain. Only AHB clock domain pipelines are ++ * reset. ++ */ ++ unsigned hsftrst : 1; ++ /** Host Frame Counter Reset (Host Only)<br> ++ * ++ * The application can reset the (micro)frame number ++ * counter inside the core, using this bit. When the ++ * (micro)frame counter is reset, the subsequent SOF ++ * sent out by the core, will have a (micro)frame ++ * number of 0. ++ */ ++ unsigned hstfrm : 1; ++ /** In Token Sequence Learning Queue Flush ++ * (INTknQFlsh) (Device Only) ++ */ ++ unsigned intknqflsh : 1; ++ /** RxFIFO Flush (RxFFlsh) (Device and Host) ++ * ++ * The application can flush the entire Receive FIFO ++ * using this bit. <p>The application must first ++ * ensure that the core is not in the middle of a ++ * transaction. <p>The application should write into ++ * this bit, only after making sure that neither the ++ * DMA engine is reading from the RxFIFO nor the MAC ++ * is writing the data in to the FIFO. <p>The ++ * application should wait until the bit is cleared ++ * before performing any other operations. This bit ++ * will takes 8 clocks (slowest of PHY or AHB clock) ++ * to clear. ++ */ ++ unsigned rxfflsh : 1; ++ /** TxFIFO Flush (TxFFlsh) (Device and Host). ++ * ++ * This bit is used to selectively flush a single or ++ * all transmit FIFOs. The application must first ++ * ensure that the core is not in the middle of a ++ * transaction. <p>The application should write into ++ * this bit, only after making sure that neither the ++ * DMA engine is writing into the TxFIFO nor the MAC ++ * is reading the data out of the FIFO. <p>The ++ * application should wait until the core clears this ++ * bit, before performing any operations. This bit ++ * will takes 8 clocks (slowest of PHY or AHB clock) ++ * to clear. ++ */ ++ unsigned txfflsh : 1; ++ ++ /** TxFIFO Number (TxFNum) (Device and Host). ++ * ++ * This is the FIFO number which needs to be flushed, ++ * using the TxFIFO Flush bit. This field should not ++ * be changed until the TxFIFO Flush bit is cleared by ++ * the core. ++ * - 0x0 : Non Periodic TxFIFO Flush ++ * - 0x1 : Periodic TxFIFO #1 Flush in device mode ++ * or Periodic TxFIFO in host mode ++ * - 0x2 : Periodic TxFIFO #2 Flush in device mode. ++ * - ... ++ * - 0xF : Periodic TxFIFO #15 Flush in device mode ++ * - 0x10: Flush all the Transmit NonPeriodic and ++ * Transmit Periodic FIFOs in the core ++ */ ++ unsigned txfnum : 5; ++ /** Reserved */ ++ unsigned reserved11_29 : 19; ++ /** DMA Request Signal. Indicated DMA request is in ++ * probress. Used for debug purpose. */ ++ unsigned dmareq : 1; ++ /** AHB Master Idle. Indicates the AHB Master State ++ * Machine is in IDLE condition. */ ++ unsigned ahbidle : 1; ++ } b; ++} grstctl_t; ++ ++ ++/** ++ * This union represents the bit fields of the Core Interrupt Mask ++ * Register (GINTMSK). Set/clear the bits using the bit fields then ++ * write the <i>d32</i> value to the register. ++ */ ++typedef union gintmsk_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned reserved0 : 1; ++ unsigned modemismatch : 1; ++ unsigned otgintr : 1; ++ unsigned sofintr : 1; ++ unsigned rxstsqlvl : 1; ++ unsigned nptxfempty : 1; ++ unsigned ginnakeff : 1; ++ unsigned goutnakeff : 1; ++ unsigned reserved8 : 1; ++ unsigned i2cintr : 1; ++ unsigned erlysuspend : 1; ++ unsigned usbsuspend : 1; ++ unsigned usbreset : 1; ++ unsigned enumdone : 1; ++ unsigned isooutdrop : 1; ++ unsigned eopframe : 1; ++ unsigned reserved16 : 1; ++ unsigned epmismatch : 1; ++ unsigned inepintr : 1; ++ unsigned outepintr : 1; ++ unsigned incomplisoin : 1; ++ unsigned incomplisoout : 1; ++ unsigned reserved22_23 : 2; ++ unsigned portintr : 1; ++ unsigned hcintr : 1; ++ unsigned ptxfempty : 1; ++ unsigned reserved27 : 1; ++ unsigned conidstschng : 1; ++ unsigned disconnect : 1; ++ unsigned sessreqintr : 1; ++ unsigned wkupintr : 1; ++ } b; ++} gintmsk_data_t; ++/** ++ * This union represents the bit fields of the Core Interrupt Register ++ * (GINTSTS). Set/clear the bits using the bit fields then write the ++ * <i>d32</i> value to the register. ++ */ ++typedef union gintsts_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++#define DWC_SOF_INTR_MASK 0x0008 ++ /** register bits */ ++ struct ++ { ++#define DWC_HOST_MODE 1 ++ unsigned curmode : 1; ++ unsigned modemismatch : 1; ++ unsigned otgintr : 1; ++ unsigned sofintr : 1; ++ unsigned rxstsqlvl : 1; ++ unsigned nptxfempty : 1; ++ unsigned ginnakeff : 1; ++ unsigned goutnakeff : 1; ++ unsigned reserved8 : 1; ++ unsigned i2cintr : 1; ++ unsigned erlysuspend : 1; ++ unsigned usbsuspend : 1; ++ unsigned usbreset : 1; ++ unsigned enumdone : 1; ++ unsigned isooutdrop : 1; ++ unsigned eopframe : 1; ++ unsigned intokenrx : 1; ++ unsigned epmismatch : 1; ++ unsigned inepint: 1; ++ unsigned outepintr : 1; ++ unsigned incomplisoin : 1; ++ unsigned incomplisoout : 1; ++ unsigned reserved22_23 : 2; ++ unsigned portintr : 1; ++ unsigned hcintr : 1; ++ unsigned ptxfempty : 1; ++ unsigned reserved27 : 1; ++ unsigned conidstschng : 1; ++ unsigned disconnect : 1; ++ unsigned sessreqintr : 1; ++ unsigned wkupintr : 1; ++ } b; ++} gintsts_data_t; ++ ++ ++/** ++ * This union represents the bit fields in the Device Receive Status Read and ++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> ++ * element then read out the bits using the <i>b</i>it elements. ++ */ ++typedef union device_grxsts_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned epnum : 4; ++ unsigned bcnt : 11; ++ unsigned dpid : 2; ++ ++#define DWC_STS_DATA_UPDT 0x2 // OUT Data Packet ++#define DWC_STS_XFER_COMP 0x3 // OUT Data Transfer Complete ++ ++#define DWC_DSTS_GOUT_NAK 0x1 // Global OUT NAK ++#define DWC_DSTS_SETUP_COMP 0x4 // Setup Phase Complete ++#define DWC_DSTS_SETUP_UPDT 0x6 // SETUP Packet ++ unsigned pktsts : 4; ++ unsigned fn : 4; ++ unsigned reserved : 7; ++ } b; ++} device_grxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Receive Status Read and ++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i> ++ * element then read out the bits using the <i>b</i>it elements. ++ */ ++typedef union host_grxsts_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned chnum : 4; ++ unsigned bcnt : 11; ++ unsigned dpid : 2; ++ ++ unsigned pktsts : 4; ++#define DWC_GRXSTS_PKTSTS_IN 0x2 ++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP 0x3 ++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5 ++#define DWC_GRXSTS_PKTSTS_CH_HALTED 0x7 ++ ++ unsigned reserved : 11; ++ } b; ++} host_grxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ, ++ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element then ++ * read out the bits using the <i>b</i>it elements. ++ */ ++typedef union fifosize_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned startaddr : 16; ++ unsigned depth : 16; ++ } b; ++} fifosize_data_t; ++ ++/** ++ * This union represents the bit fields in the Non-Periodic Transmit ++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the ++ * <i>d32</i> element then read out the bits using the <i>b</i>it ++ * elements. ++ */ ++typedef union gnptxsts_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned nptxfspcavail : 16; ++ unsigned nptxqspcavail : 8; ++ /** Top of the Non-Periodic Transmit Request Queue ++ * - bit 24 - Terminate (Last entry for the selected ++ * channel/EP) ++ * - bits 26:25 - Token Type ++ * - 2'b00 - IN/OUT ++ * - 2'b01 - Zero Length OUT ++ * - 2'b10 - PING/Complete Split ++ * - 2'b11 - Channel Halt ++ * - bits 30:27 - Channel/EP Number ++ */ ++ unsigned nptxqtop_terminate : 1; ++ unsigned nptxqtop_token : 2; ++ unsigned nptxqtop_chnep : 4; ++ unsigned reserved : 1; ++ } b; ++} gnptxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Transmit ++ * FIFO Status Register (DTXFSTS). Read the register into the ++ * <i>d32</i> element then read out the bits using the <i>b</i>it ++ * elements. ++ */ ++typedef union dtxfsts_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned txfspcavail : 16; ++ unsigned reserved : 16; ++ } b; ++} dtxfsts_data_t; ++ ++/** ++ * This union represents the bit fields in the I2C Control Register ++ * (I2CCTL). Read the register into the <i>d32</i> element then read out the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union gi2cctl_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned rwdata : 8; ++ unsigned regaddr : 8; ++ unsigned addr : 7; ++ unsigned i2cen : 1; ++ unsigned ack : 1; ++ unsigned i2csuspctl : 1; ++ unsigned i2cdevaddr : 2; ++ unsigned reserved : 2; ++ unsigned rw : 1; ++ unsigned bsydne : 1; ++ } b; ++} gi2cctl_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config1 ++ * Register. Read the register into the <i>d32</i> element then read ++ * out the bits using the <i>b</i>it elements. ++ */ ++typedef union hwcfg1_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned ep_dir0 : 2; ++ unsigned ep_dir1 : 2; ++ unsigned ep_dir2 : 2; ++ unsigned ep_dir3 : 2; ++ unsigned ep_dir4 : 2; ++ unsigned ep_dir5 : 2; ++ unsigned ep_dir6 : 2; ++ unsigned ep_dir7 : 2; ++ unsigned ep_dir8 : 2; ++ unsigned ep_dir9 : 2; ++ unsigned ep_dir10 : 2; ++ unsigned ep_dir11 : 2; ++ unsigned ep_dir12 : 2; ++ unsigned ep_dir13 : 2; ++ unsigned ep_dir14 : 2; ++ unsigned ep_dir15 : 2; ++ } b; ++} hwcfg1_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config2 ++ * Register. Read the register into the <i>d32</i> element then read ++ * out the bits using the <i>b</i>it elements. ++ */ ++typedef union hwcfg2_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /* GHWCFG2 */ ++ unsigned op_mode : 3; ++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0 ++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1 ++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2 ++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3 ++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4 ++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5 ++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6 ++ ++ unsigned architecture : 2; ++ unsigned point2point : 1; ++ unsigned hs_phy_type : 2; ++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0 ++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1 ++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2 ++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3 ++ ++ unsigned fs_phy_type : 2; ++ unsigned num_dev_ep : 4; ++ unsigned num_host_chan : 4; ++ unsigned perio_ep_supported : 1; ++ unsigned dynamic_fifo : 1; ++ unsigned multi_proc_int : 1; ++ unsigned reserved21 : 1; ++ unsigned nonperio_tx_q_depth : 2; ++ unsigned host_perio_tx_q_depth : 2; ++ unsigned dev_token_q_depth : 5; ++ unsigned reserved31 : 1; ++ } b; ++} hwcfg2_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config3 ++ * Register. Read the register into the <i>d32</i> element then read ++ * out the bits using the <i>b</i>it elements. ++ */ ++typedef union hwcfg3_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /* GHWCFG3 */ ++ unsigned xfer_size_cntr_width : 4; ++ unsigned packet_size_cntr_width : 3; ++ unsigned otg_func : 1; ++ unsigned i2c : 1; ++ unsigned vendor_ctrl_if : 1; ++ unsigned optional_features : 1; ++ unsigned synch_reset_type : 1; ++ unsigned ahb_phy_clock_synch : 1; ++ unsigned reserved15_13 : 3; ++ unsigned dfifo_depth : 16; ++ } b; ++} hwcfg3_data_t; ++ ++/** ++ * This union represents the bit fields in the User HW Config4 ++ * Register. Read the register into the <i>d32</i> element then read ++ * out the bits using the <i>b</i>it elements. ++ */ ++typedef union hwcfg4_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned num_dev_perio_in_ep : 4; ++ unsigned power_optimiz : 1; ++ unsigned min_ahb_freq : 9; ++ unsigned utmi_phy_data_width : 2; ++ unsigned num_dev_mode_ctrl_ep : 4; ++ unsigned iddig_filt_en : 1; ++ unsigned vbus_valid_filt_en : 1; ++ unsigned a_valid_filt_en : 1; ++ unsigned b_valid_filt_en : 1; ++ unsigned session_end_filt_en : 1; ++ unsigned ded_fifo_en : 1; ++ unsigned num_in_eps : 4; ++ unsigned desc_dma : 1; ++ unsigned desc_dma_dyn : 1; ++ } b; ++} hwcfg4_data_t; ++ ++//////////////////////////////////////////// ++// Device Registers ++/** ++ * Device Global Registers. <i>Offsets 800h-BFFh</i> ++ * ++ * The following structures define the size and relative field offsets ++ * for the Device Mode Registers. ++ * ++ * <i>These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown.</i> ++ */ ++typedef struct dwc_otg_dev_global_regs ++{ ++ /** Device Configuration Register. <i>Offset 800h</i> */ ++ volatile uint32_t dcfg; ++ /** Device Control Register. <i>Offset: 804h</i> */ ++ volatile uint32_t dctl; ++ /** Device Status Register (Read Only). <i>Offset: 808h</i> */ ++ volatile uint32_t dsts; ++ /** Reserved. <i>Offset: 80Ch</i> */ ++ uint32_t unused; ++ /** Device IN Endpoint Common Interrupt Mask ++ * Register. <i>Offset: 810h</i> */ ++ volatile uint32_t diepmsk; ++ /** Device OUT Endpoint Common Interrupt Mask ++ * Register. <i>Offset: 814h</i> */ ++ volatile uint32_t doepmsk; ++ /** Device All Endpoints Interrupt Register. <i>Offset: 818h</i> */ ++ volatile uint32_t daint; ++ /** Device All Endpoints Interrupt Mask Register. <i>Offset: ++ * 81Ch</i> */ ++ volatile uint32_t daintmsk; ++ /** Device IN Token Queue Read Register-1 (Read Only). ++ * <i>Offset: 820h</i> */ ++ volatile uint32_t dtknqr1; ++ /** Device IN Token Queue Read Register-2 (Read Only). ++ * <i>Offset: 824h</i> */ ++ volatile uint32_t dtknqr2; ++ /** Device VBUS discharge Register. <i>Offset: 828h</i> */ ++ volatile uint32_t dvbusdis; ++ /** Device VBUS Pulse Register. <i>Offset: 82Ch</i> */ ++ volatile uint32_t dvbuspulse; ++ /** Device IN Token Queue Read Register-3 (Read Only). / ++ * Device Thresholding control register (Read/Write) ++ * <i>Offset: 830h</i> */ ++ volatile uint32_t dtknqr3_dthrctl; ++ /** Device IN Token Queue Read Register-4 (Read Only). / ++ * Device IN EPs empty Inr. Mask Register (Read/Write) ++ * <i>Offset: 834h</i> */ ++ volatile uint32_t dtknqr4_fifoemptymsk; ++ /** Device Each Endpoint Interrupt Register (Read Only). / ++ * <i>Offset: 838h</i> */ ++ volatile uint32_t deachint; ++ /** Device Each Endpoint Interrupt mask Register (Read/Write). / ++ * <i>Offset: 83Ch</i> */ ++ volatile uint32_t deachintmsk; ++ /** Device Each In Endpoint Interrupt mask Register (Read/Write). / ++ * <i>Offset: 840h</i> */ ++ volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS]; ++ /** Device Each Out Endpoint Interrupt mask Register (Read/Write). / ++ * <i>Offset: 880h</i> */ ++ volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS]; ++} dwc_otg_device_global_regs_t; ++ ++/** ++ * This union represents the bit fields in the Device Configuration ++ * Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. Write the ++ * <i>d32</i> member to the dcfg register. ++ */ ++typedef union dcfg_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** Device Speed */ ++ unsigned devspd : 2; ++ /** Non Zero Length Status OUT Handshake */ ++ unsigned nzstsouthshk : 1; ++#define DWC_DCFG_SEND_STALL 1 ++ ++ unsigned reserved3 : 1; ++ /** Device Addresses */ ++ unsigned devaddr : 7; ++ /** Periodic Frame Interval */ ++ unsigned perfrint : 2; ++#define DWC_DCFG_FRAME_INTERVAL_80 0 ++#define DWC_DCFG_FRAME_INTERVAL_85 1 ++#define DWC_DCFG_FRAME_INTERVAL_90 2 ++#define DWC_DCFG_FRAME_INTERVAL_95 3 ++ ++ unsigned reserved13_17 : 5; ++ /** In Endpoint Mis-match count */ ++ unsigned epmscnt : 5; ++ /** Enable Descriptor DMA in Device mode */ ++ unsigned descdma : 1; ++ } b; ++} dcfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Control ++ * Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. ++ */ ++typedef union dctl_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** Remote Wakeup */ ++ unsigned rmtwkupsig : 1; ++ /** Soft Disconnect */ ++ unsigned sftdiscon : 1; ++ /** Global Non-Periodic IN NAK Status */ ++ unsigned gnpinnaksts : 1; ++ /** Global OUT NAK Status */ ++ unsigned goutnaksts : 1; ++ /** Test Control */ ++ unsigned tstctl : 3; ++ /** Set Global Non-Periodic IN NAK */ ++ unsigned sgnpinnak : 1; ++ /** Clear Global Non-Periodic IN NAK */ ++ unsigned cgnpinnak : 1; ++ /** Set Global OUT NAK */ ++ unsigned sgoutnak : 1; ++ /** Clear Global OUT NAK */ ++ unsigned cgoutnak : 1; ++ ++ /** Power-On Programming Done */ ++ unsigned pwronprgdone : 1; ++ /** Global Continue on BNA */ ++ unsigned gcontbna : 1; ++ /** Global Multi Count */ ++ unsigned gmc : 2; ++ /** Ignore Frame Number for ISOC EPs */ ++ unsigned ifrmnum : 1; ++ /** NAK on Babble */ ++ unsigned nakonbble : 1; ++ ++ unsigned reserved16_31 : 16; ++ } b; ++} dctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Device Status ++ * Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. ++ */ ++typedef union dsts_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** Suspend Status */ ++ unsigned suspsts : 1; ++ /** Enumerated Speed */ ++ unsigned enumspd : 2; ++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0 ++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1 ++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ 2 ++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ 3 ++ /** Erratic Error */ ++ unsigned errticerr : 1; ++ unsigned reserved4_7: 4; ++ /** Frame or Microframe Number of the received SOF */ ++ unsigned soffn : 14; ++ unsigned reserved22_31 : 10; ++ } b; ++} dsts_data_t; ++ ++ ++/** ++ * This union represents the bit fields in the Device IN EP Interrupt ++ * Register and the Device IN EP Common Mask Register. ++ * ++ * - Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union diepint_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** Transfer complete mask */ ++ unsigned xfercompl : 1; ++ /** Endpoint disable mask */ ++ unsigned epdisabled : 1; ++ /** AHB Error mask */ ++ unsigned ahberr : 1; ++ /** TimeOUT Handshake mask (non-ISOC EPs) */ ++ unsigned timeout : 1; ++ /** IN Token received with TxF Empty mask */ ++ unsigned intktxfemp : 1; ++ /** IN Token Received with EP mismatch mask */ ++ unsigned intknepmis : 1; ++ /** IN Endpoint HAK Effective mask */ ++ unsigned inepnakeff : 1; ++ /** IN Endpoint HAK Effective mask */ ++ unsigned emptyintr : 1; ++ ++ unsigned txfifoundrn : 1; ++ ++ /** BNA Interrupt mask */ ++ unsigned bna : 1; ++ ++ unsigned reserved10_12 : 3; ++ /** BNA Interrupt mask */ ++ unsigned nak : 1; ++ ++ unsigned reserved14_31 : 18; ++ } b; ++} diepint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN EP ++ * Common/Dedicated Interrupt Mask Register. ++ */ ++typedef union diepint_data diepmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Device OUT EP Interrupt ++ * Registerand Device OUT EP Common Interrupt Mask Register. ++ * ++ * - Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union doepint_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** Transfer complete */ ++ unsigned xfercompl : 1; ++ /** Endpoint disable */ ++ unsigned epdisabled : 1; ++ /** AHB Error */ ++ unsigned ahberr : 1; ++ /** Setup Phase Done (contorl EPs) */ ++ unsigned setup : 1; ++ /** OUT Token Received when Endpoint Disabled */ ++ unsigned outtknepdis : 1; ++ ++ unsigned stsphsercvd : 1; ++ /** Back-to-Back SETUP Packets Received */ ++ unsigned back2backsetup : 1; ++ ++ unsigned reserved7 : 1; ++ /** OUT packet Error */ ++ unsigned outpkterr : 1; ++ /** BNA Interrupt */ ++ unsigned bna : 1; ++ ++ unsigned reserved10 : 1; ++ /** Packet Drop Status */ ++ unsigned pktdrpsts : 1; ++ /** Babble Interrupt */ ++ unsigned babble : 1; ++ /** NAK Interrupt */ ++ unsigned nak : 1; ++ /** NYET Interrupt */ ++ unsigned nyet : 1; ++ ++ unsigned reserved15_31 : 17; ++ } b; ++} doepint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device OUT EP ++ * Common/Dedicated Interrupt Mask Register. ++ */ ++typedef union doepint_data doepmsk_data_t; ++ ++/** ++ * This union represents the bit fields in the Device All EP Interrupt ++ * and Mask Registers. ++ * - Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union daint_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** IN Endpoint bits */ ++ unsigned in : 16; ++ /** OUT Endpoint bits */ ++ unsigned out : 16; ++ } ep; ++ struct ++ { ++ /** IN Endpoint bits */ ++ unsigned inep0 : 1; ++ unsigned inep1 : 1; ++ unsigned inep2 : 1; ++ unsigned inep3 : 1; ++ unsigned inep4 : 1; ++ unsigned inep5 : 1; ++ unsigned inep6 : 1; ++ unsigned inep7 : 1; ++ unsigned inep8 : 1; ++ unsigned inep9 : 1; ++ unsigned inep10 : 1; ++ unsigned inep11 : 1; ++ unsigned inep12 : 1; ++ unsigned inep13 : 1; ++ unsigned inep14 : 1; ++ unsigned inep15 : 1; ++ /** OUT Endpoint bits */ ++ unsigned outep0 : 1; ++ unsigned outep1 : 1; ++ unsigned outep2 : 1; ++ unsigned outep3 : 1; ++ unsigned outep4 : 1; ++ unsigned outep5 : 1; ++ unsigned outep6 : 1; ++ unsigned outep7 : 1; ++ unsigned outep8 : 1; ++ unsigned outep9 : 1; ++ unsigned outep10 : 1; ++ unsigned outep11 : 1; ++ unsigned outep12 : 1; ++ unsigned outep13 : 1; ++ unsigned outep14 : 1; ++ unsigned outep15 : 1; ++ } b; ++} daint_data_t; ++ ++/** ++ * This union represents the bit fields in the Device IN Token Queue ++ * Read Registers. ++ * - Read the register into the <i>d32</i> member. ++ * - READ-ONLY Register ++ */ ++typedef union dtknq1_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** In Token Queue Write Pointer */ ++ unsigned intknwptr : 5; ++ /** Reserved */ ++ unsigned reserved05_06 : 2; ++ /** write pointer has wrapped. */ ++ unsigned wrap_bit : 1; ++ /** EP Numbers of IN Tokens 0 ... 4 */ ++ unsigned epnums0_5 : 24; ++ }b; ++} dtknq1_data_t; ++ ++/** ++ * This union represents Threshold control Register ++ * - Read and write the register into the <i>d32</i> member. ++ * - READ-WRITABLE Register ++ */ ++typedef union dthrctl_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** non ISO Tx Thr. Enable */ ++ unsigned non_iso_thr_en : 1; ++ /** ISO Tx Thr. Enable */ ++ unsigned iso_thr_en : 1; ++ /** Tx Thr. Length */ ++ unsigned tx_thr_len : 9; ++ /** Reserved */ ++ unsigned reserved11_15 : 5; ++ /** Rx Thr. Enable */ ++ unsigned rx_thr_en : 1; ++ /** Rx Thr. Length */ ++ unsigned rx_thr_len : 9; ++ /** Reserved */ ++ unsigned reserved26_31 : 6; ++ }b; ++} dthrctl_data_t; ++ ++ ++/** ++ * Device Logical IN Endpoint-Specific Registers. <i>Offsets ++ * 900h-AFCh</i> ++ * ++ * There will be one set of endpoint registers per logical endpoint ++ * implemented. ++ * ++ * <i>These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown.</i> ++ */ ++typedef struct dwc_otg_dev_in_ep_regs ++{ ++ /** Device IN Endpoint Control Register. <i>Offset:900h + ++ * (ep_num * 20h) + 00h</i> */ ++ volatile uint32_t diepctl; ++ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */ ++ uint32_t reserved04; ++ /** Device IN Endpoint Interrupt Register. <i>Offset:900h + ++ * (ep_num * 20h) + 08h</i> */ ++ volatile uint32_t diepint; ++ /** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */ ++ uint32_t reserved0C; ++ /** Device IN Endpoint Transfer Size ++ * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */ ++ volatile uint32_t dieptsiz; ++ /** Device IN Endpoint DMA Address Register. <i>Offset:900h + ++ * (ep_num * 20h) + 14h</i> */ ++ volatile uint32_t diepdma; ++ /** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h + ++ * (ep_num * 20h) + 18h</i> */ ++ volatile uint32_t dtxfsts; ++ /** Device IN Endpoint DMA Buffer Register. <i>Offset:900h + ++ * (ep_num * 20h) + 1Ch</i> */ ++ volatile uint32_t diepdmab; ++} dwc_otg_dev_in_ep_regs_t; ++ ++/** ++ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets: ++ * B00h-CFCh</i> ++ * ++ * There will be one set of endpoint registers per logical endpoint ++ * implemented. ++ * ++ * <i>These registers are visible only in Device mode and must not be ++ * accessed in Host mode, as the results are unknown.</i> ++ */ ++typedef struct dwc_otg_dev_out_ep_regs ++{ ++ /** Device OUT Endpoint Control Register. <i>Offset:B00h + ++ * (ep_num * 20h) + 00h</i> */ ++ volatile uint32_t doepctl; ++ /** Device OUT Endpoint Frame number Register. <i>Offset: ++ * B00h + (ep_num * 20h) + 04h</i> */ ++ volatile uint32_t doepfn; ++ /** Device OUT Endpoint Interrupt Register. <i>Offset:B00h + ++ * (ep_num * 20h) + 08h</i> */ ++ volatile uint32_t doepint; ++ /** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */ ++ uint32_t reserved0C; ++ /** Device OUT Endpoint Transfer Size Register. <i>Offset: ++ * B00h + (ep_num * 20h) + 10h</i> */ ++ volatile uint32_t doeptsiz; ++ /** Device OUT Endpoint DMA Address Register. <i>Offset:B00h ++ * + (ep_num * 20h) + 14h</i> */ ++ volatile uint32_t doepdma; ++ /** Reserved. <i>Offset:B00h + * (ep_num * 20h) + 1Ch</i> */ ++ uint32_t unused; ++ /** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h ++ * + (ep_num * 20h) + 1Ch</i> */ ++ uint32_t doepdmab; ++} dwc_otg_dev_out_ep_regs_t; ++ ++/** ++ * This union represents the bit fields in the Device EP Control ++ * Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. ++ */ ++typedef union depctl_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** Maximum Packet Size ++ * IN/OUT EPn ++ * IN/OUT EP0 - 2 bits ++ * 2'b00: 64 Bytes ++ * 2'b01: 32 ++ * 2'b10: 16 ++ * 2'b11: 8 */ ++ unsigned mps : 11; ++#define DWC_DEP0CTL_MPS_64 0 ++#define DWC_DEP0CTL_MPS_32 1 ++#define DWC_DEP0CTL_MPS_16 2 ++#define DWC_DEP0CTL_MPS_8 3 ++ ++ /** Next Endpoint ++ * IN EPn/IN EP0 ++ * OUT EPn/OUT EP0 - reserved */ ++ unsigned nextep : 4; ++ ++ /** USB Active Endpoint */ ++ unsigned usbactep : 1; ++ ++ /** Endpoint DPID (INTR/Bulk IN and OUT endpoints) ++ * This field contains the PID of the packet going to ++ * be received or transmitted on this endpoint. The ++ * application should program the PID of the first ++ * packet going to be received or transmitted on this ++ * endpoint , after the endpoint is ++ * activated. Application use the SetD1PID and ++ * SetD0PID fields of this register to program either ++ * D0 or D1 PID. ++ * ++ * The encoding for this field is ++ * - 0: D0 ++ * - 1: D1 ++ */ ++ unsigned dpid : 1; ++ ++ /** NAK Status */ ++ unsigned naksts : 1; ++ ++ /** Endpoint Type ++ * 2'b00: Control ++ * 2'b01: Isochronous ++ * 2'b10: Bulk ++ * 2'b11: Interrupt */ ++ unsigned eptype : 2; ++ ++ /** Snoop Mode ++ * OUT EPn/OUT EP0 ++ * IN EPn/IN EP0 - reserved */ ++ unsigned snp : 1; ++ ++ /** Stall Handshake */ ++ unsigned stall : 1; ++ ++ /** Tx Fifo Number ++ * IN EPn/IN EP0 ++ * OUT EPn/OUT EP0 - reserved */ ++ unsigned txfnum : 4; ++ ++ /** Clear NAK */ ++ unsigned cnak : 1; ++ /** Set NAK */ ++ unsigned snak : 1; ++ /** Set DATA0 PID (INTR/Bulk IN and OUT endpoints) ++ * Writing to this field sets the Endpoint DPID (DPID) ++ * field in this register to DATA0. Set Even ++ * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints) ++ * Writing to this field sets the Even/Odd ++ * (micro)frame (EO_FrNum) field to even (micro) ++ * frame. ++ */ ++ unsigned setd0pid : 1; ++ /** Set DATA1 PID (INTR/Bulk IN and OUT endpoints) ++ * Writing to this field sets the Endpoint DPID (DPID) ++ * field in this register to DATA1 Set Odd ++ * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints) ++ * Writing to this field sets the Even/Odd ++ * (micro)frame (EO_FrNum) field to odd (micro) frame. ++ */ ++ unsigned setd1pid : 1; ++ ++ /** Endpoint Disable */ ++ unsigned epdis : 1; ++ /** Endpoint Enable */ ++ unsigned epena : 1; ++ } b; ++} depctl_data_t; ++ ++/** ++ * This union represents the bit fields in the Device EP Transfer ++ * Size Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. ++ */ ++typedef union deptsiz_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer size */ ++ unsigned xfersize : 19; ++ /** Packet Count */ ++ unsigned pktcnt : 10; ++ /** Multi Count - Periodic IN endpoints */ ++ unsigned mc : 2; ++ unsigned reserved : 1; ++ } b; ++} deptsiz_data_t; ++ ++/** ++ * This union represents the bit fields in the Device EP 0 Transfer ++ * Size Register. Read the register into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it elements. ++ */ ++typedef union deptsiz0_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct { ++ /** Transfer size */ ++ unsigned xfersize : 7; ++ /** Reserved */ ++ unsigned reserved7_18 : 12; ++ /** Packet Count */ ++ unsigned pktcnt : 1; ++ /** Reserved */ ++ unsigned reserved20_28 : 9; ++ /**Setup Packet Count (DOEPTSIZ0 Only) */ ++ unsigned supcnt : 2; ++ unsigned reserved31; ++ } b; ++} deptsiz0_data_t; ++ ++ ++///////////////////////////////////////////////// ++// DMA Descriptor Specific Structures ++// ++ ++/** Buffer status definitions */ ++ ++#define BS_HOST_READY 0x0 ++#define BS_DMA_BUSY 0x1 ++#define BS_DMA_DONE 0x2 ++#define BS_HOST_BUSY 0x3 ++ ++/** Receive/Transmit status definitions */ ++ ++#define RTS_SUCCESS 0x0 ++#define RTS_BUFFLUSH 0x1 ++#define RTS_RESERVED 0x2 ++#define RTS_BUFERR 0x3 ++ ++ ++/** ++ * This union represents the bit fields in the DMA Descriptor ++ * status quadlet. Read the quadlet into the <i>d32</i> member then ++ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and ++ * <i>b_iso_in</i> elements. ++ */ ++typedef union desc_sts_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** quadlet bits */ ++ struct { ++ /** Received number of bytes */ ++ unsigned bytes : 16; ++ ++ unsigned reserved16_22 : 7; ++ /** Multiple Transfer - only for OUT EPs */ ++ unsigned mtrf : 1; ++ /** Setup Packet received - only for OUT EPs */ ++ unsigned sr : 1; ++ /** Interrupt On Complete */ ++ unsigned ioc : 1; ++ /** Short Packet */ ++ unsigned sp : 1; ++ /** Last */ ++ unsigned l : 1; ++ /** Receive Status */ ++ unsigned sts : 2; ++ /** Buffer Status */ ++ unsigned bs : 2; ++ } b; ++ ++#ifdef DWC_EN_ISOC ++ /** iso out quadlet bits */ ++ struct { ++ /** Received number of bytes */ ++ unsigned rxbytes : 11; ++ ++ unsigned reserved11 : 1; ++ /** Frame Number */ ++ unsigned framenum : 11; ++ /** Received ISO Data PID */ ++ unsigned pid : 2; ++ /** Interrupt On Complete */ ++ unsigned ioc : 1; ++ /** Short Packet */ ++ unsigned sp : 1; ++ /** Last */ ++ unsigned l : 1; ++ /** Receive Status */ ++ unsigned rxsts : 2; ++ /** Buffer Status */ ++ unsigned bs : 2; ++ } b_iso_out; ++ ++ /** iso in quadlet bits */ ++ struct { ++ /** Transmited number of bytes */ ++ unsigned txbytes : 12; ++ /** Frame Number */ ++ unsigned framenum : 11; ++ /** Transmited ISO Data PID */ ++ unsigned pid : 2; ++ /** Interrupt On Complete */ ++ unsigned ioc : 1; ++ /** Short Packet */ ++ unsigned sp : 1; ++ /** Last */ ++ unsigned l : 1; ++ /** Transmit Status */ ++ unsigned txsts : 2; ++ /** Buffer Status */ ++ unsigned bs : 2; ++ } b_iso_in; ++#endif //DWC_EN_ISOC ++} desc_sts_data_t; ++ ++/** ++ * DMA Descriptor structure ++ * ++ * DMA Descriptor structure contains two quadlets: ++ * Status quadlet and Data buffer pointer. ++ */ ++typedef struct dwc_otg_dma_desc ++{ ++ /** DMA Descriptor status quadlet */ ++ desc_sts_data_t status; ++ /** DMA Descriptor data buffer pointer */ ++ dma_addr_t buf; ++} dwc_otg_dma_desc_t; ++ ++/** ++ * The dwc_otg_dev_if structure contains information needed to manage ++ * the DWC_otg controller acting in device mode. It represents the ++ * programming view of the device-specific aspects of the controller. ++ */ ++typedef struct dwc_otg_dev_if ++{ ++ /** Pointer to device Global registers. ++ * Device Global Registers starting at offset 800h ++ */ ++ dwc_otg_device_global_regs_t *dev_global_regs; ++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800 ++ ++ /** ++ * Device Logical IN Endpoint-Specific Registers 900h-AFCh ++ */ ++ dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS]; ++#define DWC_DEV_IN_EP_REG_OFFSET 0x900 ++#define DWC_EP_REG_OFFSET 0x20 ++ ++ /** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */ ++ dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS]; ++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00 ++ ++ /* Device configuration information*/ ++ uint8_t speed; /**< Device Speed 0: Unknown, 1: LS, 2:FS, 3: HS */ ++ uint8_t num_in_eps; /**< Number # of Tx EP range: 0-15 exept ep0 */ ++ uint8_t num_out_eps; /**< Number # of Rx EP range: 0-15 exept ep 0*/ ++ ++ /** Size of periodic FIFOs (Bytes) */ ++ uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS]; ++ ++ /** Size of Tx FIFOs (Bytes) */ ++ uint16_t tx_fifo_size[MAX_TX_FIFOS]; ++ ++ /** Thresholding enable flags and length varaiables **/ ++ uint16_t rx_thr_en; ++ uint16_t iso_tx_thr_en; ++ uint16_t non_iso_tx_thr_en; ++ ++ uint16_t rx_thr_length; ++ uint16_t tx_thr_length; ++ ++ /** ++ * Pointers to the DMA Descriptors for EP0 Control ++ * transfers (virtual and physical) ++ */ ++ ++ /** 2 descriptors for SETUP packets */ ++ uint32_t dma_setup_desc_addr[2]; ++ dwc_otg_dma_desc_t* setup_desc_addr[2]; ++ ++ /** Pointer to Descriptor with latest SETUP packet */ ++ dwc_otg_dma_desc_t* psetup; ++ ++ /** Index of current SETUP handler descriptor */ ++ uint32_t setup_desc_index; ++ ++ /** Descriptor for Data In or Status In phases */ ++ uint32_t dma_in_desc_addr; ++ dwc_otg_dma_desc_t* in_desc_addr;; ++ ++ /** Descriptor for Data Out or Status Out phases */ ++ uint32_t dma_out_desc_addr; ++ dwc_otg_dma_desc_t* out_desc_addr; ++ ++} dwc_otg_dev_if_t; ++ ++ ++ ++ ++///////////////////////////////////////////////// ++// Host Mode Register Structures ++// ++/** ++ * The Host Global Registers structure defines the size and relative ++ * field offsets for the Host Mode Global Registers. Host Global ++ * Registers offsets 400h-7FFh. ++*/ ++typedef struct dwc_otg_host_global_regs ++{ ++ /** Host Configuration Register. <i>Offset: 400h</i> */ ++ volatile uint32_t hcfg; ++ /** Host Frame Interval Register. <i>Offset: 404h</i> */ ++ volatile uint32_t hfir; ++ /** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */ ++ volatile uint32_t hfnum; ++ /** Reserved. <i>Offset: 40Ch</i> */ ++ uint32_t reserved40C; ++ /** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */ ++ volatile uint32_t hptxsts; ++ /** Host All Channels Interrupt Register. <i>Offset: 414h</i> */ ++ volatile uint32_t haint; ++ /** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */ ++ volatile uint32_t haintmsk; ++} dwc_otg_host_global_regs_t; ++ ++/** ++ * This union represents the bit fields in the Host Configuration Register. ++ * Read the register into the <i>d32</i> member then set/clear the bits using ++ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register. ++ */ ++typedef union hcfg_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct ++ { ++ /** FS/LS Phy Clock Select */ ++ unsigned fslspclksel : 2; ++#define DWC_HCFG_30_60_MHZ 0 ++#define DWC_HCFG_48_MHZ 1 ++#define DWC_HCFG_6_MHZ 2 ++ ++ /** FS/LS Only Support */ ++ unsigned fslssupp : 1; ++ } b; ++} hcfg_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Frame Remaing/Number ++ * Register. ++ */ ++typedef union hfir_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct ++ { ++ unsigned frint : 16; ++ unsigned reserved : 16; ++ } b; ++} hfir_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Frame Remaing/Number ++ * Register. ++ */ ++typedef union hfnum_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct ++ { ++ unsigned frnum : 16; ++#define DWC_HFNUM_MAX_FRNUM 0x3FFF ++ unsigned frrem : 16; ++ } b; ++} hfnum_data_t; ++ ++typedef union hptxsts_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct ++ { ++ unsigned ptxfspcavail : 16; ++ unsigned ptxqspcavail : 8; ++ /** Top of the Periodic Transmit Request Queue ++ * - bit 24 - Terminate (last entry for the selected channel) ++ * - bits 26:25 - Token Type ++ * - 2'b00 - Zero length ++ * - 2'b01 - Ping ++ * - 2'b10 - Disable ++ * - bits 30:27 - Channel Number ++ * - bit 31 - Odd/even microframe ++ */ ++ unsigned ptxqtop_terminate : 1; ++ unsigned ptxqtop_token : 2; ++ unsigned ptxqtop_chnum : 4; ++ unsigned ptxqtop_odd : 1; ++ } b; ++} hptxsts_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Port Control and Status ++ * Register. Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the ++ * hprt0 register. ++ */ ++typedef union hprt0_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned prtconnsts : 1; ++ unsigned prtconndet : 1; ++ unsigned prtena : 1; ++ unsigned prtenchng : 1; ++ unsigned prtovrcurract : 1; ++ unsigned prtovrcurrchng : 1; ++ unsigned prtres : 1; ++ unsigned prtsusp : 1; ++ unsigned prtrst : 1; ++ unsigned reserved9 : 1; ++ unsigned prtlnsts : 2; ++ unsigned prtpwr : 1; ++ unsigned prttstctl : 4; ++ unsigned prtspd : 2; ++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0 ++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1 ++#define DWC_HPRT0_PRTSPD_LOW_SPEED 2 ++ unsigned reserved19_31 : 13; ++ } b; ++} hprt0_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union haint_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned ch0 : 1; ++ unsigned ch1 : 1; ++ unsigned ch2 : 1; ++ unsigned ch3 : 1; ++ unsigned ch4 : 1; ++ unsigned ch5 : 1; ++ unsigned ch6 : 1; ++ unsigned ch7 : 1; ++ unsigned ch8 : 1; ++ unsigned ch9 : 1; ++ unsigned ch10 : 1; ++ unsigned ch11 : 1; ++ unsigned ch12 : 1; ++ unsigned ch13 : 1; ++ unsigned ch14 : 1; ++ unsigned ch15 : 1; ++ unsigned reserved : 16; ++ } b; ++ ++ struct ++ { ++ unsigned chint : 16; ++ unsigned reserved : 16; ++ } b2; ++} haint_data_t; ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union haintmsk_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ unsigned ch0 : 1; ++ unsigned ch1 : 1; ++ unsigned ch2 : 1; ++ unsigned ch3 : 1; ++ unsigned ch4 : 1; ++ unsigned ch5 : 1; ++ unsigned ch6 : 1; ++ unsigned ch7 : 1; ++ unsigned ch8 : 1; ++ unsigned ch9 : 1; ++ unsigned ch10 : 1; ++ unsigned ch11 : 1; ++ unsigned ch12 : 1; ++ unsigned ch13 : 1; ++ unsigned ch14 : 1; ++ unsigned ch15 : 1; ++ unsigned reserved : 16; ++ } b; ++ ++ struct ++ { ++ unsigned chint : 16; ++ unsigned reserved : 16; ++ } b2; ++} haintmsk_data_t; ++ ++/** ++ * Host Channel Specific Registers. <i>500h-5FCh</i> ++ */ ++typedef struct dwc_otg_hc_regs ++{ ++ /** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */ ++ volatile uint32_t hcchar; ++ /** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */ ++ volatile uint32_t hcsplt; ++ /** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */ ++ volatile uint32_t hcint; ++ /** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */ ++ volatile uint32_t hcintmsk; ++ /** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */ ++ volatile uint32_t hctsiz; ++ /** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */ ++ volatile uint32_t hcdma; ++ /** Reserved. <i>Offset: 500h + (chan_num * 20h) + 18h - 500h + (chan_num * 20h) + 1Ch</i> */ ++ uint32_t reserved[2]; ++} dwc_otg_hc_regs_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Characteristics ++ * Register. Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the ++ * hcchar register. ++ */ ++typedef union hcchar_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct ++ { ++ /** Maximum packet size in bytes */ ++ unsigned mps : 11; ++ ++ /** Endpoint number */ ++ unsigned epnum : 4; ++ ++ /** 0: OUT, 1: IN */ ++ unsigned epdir : 1; ++ ++ unsigned reserved : 1; ++ ++ /** 0: Full/high speed device, 1: Low speed device */ ++ unsigned lspddev : 1; ++ ++ /** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */ ++ unsigned eptype : 2; ++ ++ /** Packets per frame for periodic transfers. 0 is reserved. */ ++ unsigned multicnt : 2; ++ ++ /** Device address */ ++ unsigned devaddr : 7; ++ ++ /** ++ * Frame to transmit periodic transaction. ++ * 0: even, 1: odd ++ */ ++ unsigned oddfrm : 1; ++ ++ /** Channel disable */ ++ unsigned chdis : 1; ++ ++ /** Channel enable */ ++ unsigned chen : 1; ++ } b; ++} hcchar_data_t; ++ ++typedef union hcsplt_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct ++ { ++ /** Port Address */ ++ unsigned prtaddr : 7; ++ ++ /** Hub Address */ ++ unsigned hubaddr : 7; ++ ++ /** Transaction Position */ ++ unsigned xactpos : 2; ++#define DWC_HCSPLIT_XACTPOS_MID 0 ++#define DWC_HCSPLIT_XACTPOS_END 1 ++#define DWC_HCSPLIT_XACTPOS_BEGIN 2 ++#define DWC_HCSPLIT_XACTPOS_ALL 3 ++ ++ /** Do Complete Split */ ++ unsigned compsplt : 1; ++ ++ /** Reserved */ ++ unsigned reserved : 14; ++ ++ /** Split Enble */ ++ unsigned spltena : 1; ++ } b; ++} hcsplt_data_t; ++ ++ ++/** ++ * This union represents the bit fields in the Host All Interrupt ++ * Register. ++ */ ++typedef union hcint_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ /** register bits */ ++ struct ++ { ++ /** Transfer Complete */ ++ unsigned xfercomp : 1; ++ /** Channel Halted */ ++ unsigned chhltd : 1; ++ /** AHB Error */ ++ unsigned ahberr : 1; ++ /** STALL Response Received */ ++ unsigned stall : 1; ++ /** NAK Response Received */ ++ unsigned nak : 1; ++ /** ACK Response Received */ ++ unsigned ack : 1; ++ /** NYET Response Received */ ++ unsigned nyet : 1; ++ /** Transaction Err */ ++ unsigned xacterr : 1; ++ /** Babble Error */ ++ unsigned bblerr : 1; ++ /** Frame Overrun */ ++ unsigned frmovrun : 1; ++ /** Data Toggle Error */ ++ unsigned datatglerr : 1; ++ /** Reserved */ ++ unsigned reserved : 21; ++ } b; ++} hcint_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Transfer Size ++ * Register. Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the ++ * hcchar register. ++ */ ++typedef union hctsiz_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct ++ { ++ /** Total transfer size in bytes */ ++ unsigned xfersize : 19; ++ ++ /** Data packets to transfer */ ++ unsigned pktcnt : 10; ++ ++ /** ++ * Packet ID for next data packet ++ * 0: DATA0 ++ * 1: DATA2 ++ * 2: DATA1 ++ * 3: MDATA (non-Control), SETUP (Control) ++ */ ++ unsigned pid : 2; ++#define DWC_HCTSIZ_DATA0 0 ++#define DWC_HCTSIZ_DATA1 2 ++#define DWC_HCTSIZ_DATA2 1 ++#define DWC_HCTSIZ_MDATA 3 ++#define DWC_HCTSIZ_SETUP 3 ++ ++ /** Do PING protocol when 1 */ ++ unsigned dopng : 1; ++ } b; ++} hctsiz_data_t; ++ ++/** ++ * This union represents the bit fields in the Host Channel Interrupt Mask ++ * Register. Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the ++ * hcintmsk register. ++ */ ++typedef union hcintmsk_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct ++ { ++ unsigned xfercompl : 1; ++ unsigned chhltd : 1; ++ unsigned ahberr : 1; ++ unsigned stall : 1; ++ unsigned nak : 1; ++ unsigned ack : 1; ++ unsigned nyet : 1; ++ unsigned xacterr : 1; ++ unsigned bblerr : 1; ++ unsigned frmovrun : 1; ++ unsigned datatglerr : 1; ++ unsigned reserved : 21; ++ } b; ++} hcintmsk_data_t; ++ ++/** OTG Host Interface Structure. ++ * ++ * The OTG Host Interface Structure structure contains information ++ * needed to manage the DWC_otg controller acting in host mode. It ++ * represents the programming view of the host-specific aspects of the ++ * controller. ++ */ ++typedef struct dwc_otg_host_if ++{ ++ /** Host Global Registers starting at offset 400h.*/ ++ dwc_otg_host_global_regs_t *host_global_regs; ++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400 ++ ++ /** Host Port 0 Control and Status Register */ ++ volatile uint32_t *hprt0; ++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440 ++ ++ ++ /** Host Channel Specific Registers at offsets 500h-5FCh. */ ++ dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS]; ++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500 ++#define DWC_OTG_CHAN_REGS_OFFSET 0x20 ++ ++ ++ /* Host configuration information */ ++ /** Number of Host Channels (range: 1-16) */ ++ uint8_t num_host_channels; ++ /** Periodic EPs supported (0: no, 1: yes) */ ++ uint8_t perio_eps_supported; ++ /** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */ ++ uint16_t perio_tx_fifo_size; ++ ++} dwc_otg_host_if_t; ++ ++ ++/** ++ * This union represents the bit fields in the Power and Clock Gating Control ++ * Register. Read the register into the <i>d32</i> member then set/clear the ++ * bits using the <i>b</i>it elements. ++ */ ++typedef union pcgcctl_data ++{ ++ /** raw register data */ ++ uint32_t d32; ++ ++ /** register bits */ ++ struct ++ { ++ /** Stop Pclk */ ++ unsigned stoppclk : 1; ++ /** Gate Hclk */ ++ unsigned gatehclk : 1; ++ /** Power Clamp */ ++ unsigned pwrclmp : 1; ++ /** Reset Power Down Modules */ ++ unsigned rstpdwnmodule : 1; ++ /** PHY Suspended */ ++ unsigned physuspended : 1; ++ ++ unsigned reserved : 27; ++ } b; ++} pcgcctl_data_t; ++ ++ ++#endif +diff --git a/drivers/usb/dwc_otg/linux/dwc_otg_plat.h b/drivers/usb/dwc_otg/linux/dwc_otg_plat.h +new file mode 100644 +index 0000000..618151b +--- /dev/null ++++ b/drivers/usb/dwc_otg/linux/dwc_otg_plat.h +@@ -0,0 +1,260 @@ ++/* ========================================================================== ++ * $File: //dwh/usb_iip/dev/software/otg/linux/platform/dwc_otg_plat.h $ ++ * $Revision: 1.2 $ ++ * $Date: 2008-11-21 05:39:16 $ ++ * $Change: 1064915 $ ++ * ++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter, ++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless ++ * otherwise expressly agreed to in writing between Synopsys and you. ++ * ++ * The Software IS NOT an item of Licensed Software or Licensed Product under ++ * any End User Software License Agreement or Agreement for Licensed Product ++ * with Synopsys or any supplement thereto. You are permitted to use and ++ * redistribute this Software in source and binary forms, with or without ++ * modification, provided that redistributions of source code must retain this ++ * notice. You may not view, use, disclose, copy or distribute this file or ++ * any information contained herein except pursuant to this license grant from ++ * Synopsys. If you do not agree with this notice, including the disclaimer ++ * below, then you are not authorized to use the Software. ++ * ++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS ++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE ++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT, ++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES ++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR ++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER ++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT ++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY ++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH ++ * DAMAGE. ++ * ========================================================================== */ ++ ++#if !defined(__DWC_OTG_PLAT_H__) ++#define __DWC_OTG_PLAT_H__ ++ ++#include <linux/types.h> ++#include <linux/slab.h> ++#include <linux/list.h> ++#include <linux/delay.h> ++#include <asm/io.h> ++ ++/** ++ * @file ++ * ++ * This file contains the Platform Specific constants, interfaces ++ * (functions and macros) for Linux. ++ * ++ */ ++//#if !defined(__LINUX_ARM_ARCH__) ++//#error "The contents of this file is Linux specific!!!" ++//#endif ++ ++/** ++ * Reads the content of a register. ++ * ++ * @param reg address of register to read. ++ * @return contents of the register. ++ * ++ ++ * Usage:<br> ++ * <code>uint32_t dev_ctl = dwc_read_reg32(&dev_regs->dctl);</code> ++ */ ++static __inline__ uint32_t dwc_read_reg32( volatile uint32_t *reg) ++{ ++ return readl(reg); ++}; ++ ++/** ++ * Writes a register with a 32 bit value. ++ * ++ * @param reg address of register to read. ++ * @param value to write to _reg. ++ * ++ * Usage:<br> ++ * <code>dwc_write_reg32(&dev_regs->dctl, 0); </code> ++ */ ++static __inline__ void dwc_write_reg32( volatile uint32_t *reg, const uint32_t value) ++{ ++ writel( value, reg ); ++}; ++ ++/** ++ * This function modifies bit values in a register. Using the ++ * algorithm: (reg_contents & ~clear_mask) | set_mask. ++ * ++ * @param reg address of register to read. ++ * @param clear_mask bit mask to be cleared. ++ * @param set_mask bit mask to be set. ++ * ++ * Usage:<br> ++ * <code> // Clear the SOF Interrupt Mask bit and <br> ++ * // set the OTG Interrupt mask bit, leaving all others as they were. ++ * dwc_modify_reg32(&dev_regs->gintmsk, DWC_SOF_INT, DWC_OTG_INT);</code> ++ */ ++static __inline__ ++ void dwc_modify_reg32( volatile uint32_t *reg, const uint32_t clear_mask, const uint32_t set_mask) ++{ ++ writel( (readl(reg) & ~clear_mask) | set_mask, reg ); ++}; ++ ++ ++/** ++ * Wrapper for the OS micro-second delay function. ++ * @param[in] usecs Microseconds of delay ++ */ ++static __inline__ void UDELAY( const uint32_t usecs ) ++{ ++ udelay( usecs ); ++} ++ ++/** ++ * Wrapper for the OS milli-second delay function. ++ * @param[in] msecs milliseconds of delay ++ */ ++static __inline__ void MDELAY( const uint32_t msecs ) ++{ ++ mdelay( msecs ); ++} ++ ++/** ++ * Wrapper for the Linux spin_lock. On the ARM (Integrator) ++ * spin_lock() is a nop. ++ * ++ * @param lock Pointer to the spinlock. ++ */ ++static __inline__ void SPIN_LOCK( spinlock_t *lock ) ++{ ++ spin_lock(lock); ++} ++ ++/** ++ * Wrapper for the Linux spin_unlock. On the ARM (Integrator) ++ * spin_lock() is a nop. ++ * ++ * @param lock Pointer to the spinlock. ++ */ ++static __inline__ void SPIN_UNLOCK( spinlock_t *lock ) ++{ ++ spin_unlock(lock); ++} ++ ++/** ++ * Wrapper (macro) for the Linux spin_lock_irqsave. On the ARM ++ * (Integrator) spin_lock() is a nop. ++ * ++ * @param l Pointer to the spinlock. ++ * @param f unsigned long for irq flags storage. ++ */ ++#define SPIN_LOCK_IRQSAVE( l, f ) spin_lock_irqsave(l,f); ++ ++/** ++ * Wrapper (macro) for the Linux spin_unlock_irqrestore. On the ARM ++ * (Integrator) spin_lock() is a nop. ++ * ++ * @param l Pointer to the spinlock. ++ * @param f unsigned long for irq flags storage. ++ */ ++#define SPIN_UNLOCK_IRQRESTORE( l,f ) spin_unlock_irqrestore(l,f); ++ ++/* ++ * Debugging support vanishes in non-debug builds. ++ */ ++ ++ ++/** ++ * The Debug Level bit-mask variable. ++ */ ++extern uint32_t g_dbg_lvl; ++/** ++ * Set the Debug Level variable. ++ */ ++static inline uint32_t SET_DEBUG_LEVEL( const uint32_t new ) ++{ ++ uint32_t old = g_dbg_lvl; ++ g_dbg_lvl = new; ++ return old; ++} ++ ++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */ ++#define DBG_CIL (0x2) ++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug ++ * messages */ ++#define DBG_CILV (0x20) ++/** When debug level has the DBG_PCD bit set, display PCD (Device) debug ++ * messages */ ++#define DBG_PCD (0x4) ++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug ++ * messages */ ++#define DBG_PCDV (0x40) ++/** When debug level has the DBG_HCD bit set, display Host debug messages */ ++#define DBG_HCD (0x8) ++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug ++ * messages */ ++#define DBG_HCDV (0x80) ++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host ++ * mode. */ ++#define DBG_HCD_URB (0x800) ++ ++/** When debug level has any bit set, display debug messages */ ++#define DBG_ANY (0xFF) ++ ++/** All debug messages off */ ++#define DBG_OFF 0 ++ ++/** Prefix string for DWC_DEBUG print macros. */ ++#define USB_DWC "dwc_otg: " ++ ++/** ++ * Print a debug message when the Global debug level variable contains ++ * the bit defined in <code>lvl</code>. ++ * ++ * @param[in] lvl - Debug level, use one of the DBG_ constants above. ++ * @param[in] x - like printf ++ * ++ * Example:<p> ++ * <code> ++ * DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr); ++ * </code> ++ * <br> ++ * results in:<br> ++ * <code> ++ * usb-DWC_otg: dwc_otg_cil_init(ca867000) ++ * </code> ++ */ ++#ifdef DEBUG ++ ++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)printk( KERN_DEBUG USB_DWC x ); }while(0) ++# define DWC_DEBUGP(x...) DWC_DEBUGPL(DBG_ANY, x ) ++ ++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl) ++ ++#else ++ ++# define DWC_DEBUGPL(lvl, x...) do{}while(0) ++# define DWC_DEBUGP(x...) ++ ++# define CHK_DEBUG_LEVEL(level) (0) ++ ++#endif /*DEBUG*/ ++ ++/** ++ * Print an Error message. ++ */ ++#define DWC_ERROR(x...) printk( KERN_ERR USB_DWC x ) ++/** ++ * Print a Warning message. ++ */ ++#define DWC_WARN(x...) printk( KERN_WARNING USB_DWC x ) ++/** ++ * Print a notice (normal but significant message). ++ */ ++#define DWC_NOTICE(x...) printk( KERN_NOTICE USB_DWC x ) ++/** ++ * Basic message printing. ++ */ ++#define DWC_PRINT(x...) printk( KERN_INFO USB_DWC x ) ++ ++#endif ++ +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0040-USB-add-mt7621-xhci-support.patch b/target/linux/ramips/patches-3.14/0040-USB-add-mt7621-xhci-support.patch new file mode 100644 index 0000000000..31227fcd4f --- /dev/null +++ b/target/linux/ramips/patches-3.14/0040-USB-add-mt7621-xhci-support.patch @@ -0,0 +1,5848 @@ +From 023e31c036fef5daf7711878590e0930544b5ad7 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 11:10:49 +0100 +Subject: [PATCH 40/57] USB: add mt7621 xhci support + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/usb/core/hcd-pci.c | 6 +- + drivers/usb/core/hub.c | 2 +- + drivers/usb/core/port.c | 3 +- + drivers/usb/host/Kconfig | 8 +- + drivers/usb/host/Makefile | 8 + + drivers/usb/host/mtk-phy-7621.c | 445 +++++ + drivers/usb/host/mtk-phy-7621.h | 2871 +++++++++++++++++++++++++++++++++ + drivers/usb/host/mtk-phy-ahb.c | 58 + + drivers/usb/host/mtk-phy.c | 102 ++ + drivers/usb/host/mtk-phy.h | 179 ++ + drivers/usb/host/pci-quirks.h | 2 +- + drivers/usb/host/xhci-dbg.c | 3 + + drivers/usb/host/xhci-mem.c | 11 + + drivers/usb/host/xhci-mtk-power.c | 115 ++ + drivers/usb/host/xhci-mtk-power.h | 13 + + drivers/usb/host/xhci-mtk-scheduler.c | 608 +++++++ + drivers/usb/host/xhci-mtk-scheduler.h | 77 + + drivers/usb/host/xhci-mtk.c | 265 +++ + drivers/usb/host/xhci-mtk.h | 120 ++ + drivers/usb/host/xhci-plat.c | 18 + + drivers/usb/host/xhci-ring.c | 109 +- + drivers/usb/host/xhci.c | 201 ++- + drivers/usb/host/xhci.h | 23 +- + 23 files changed, 5234 insertions(+), 13 deletions(-) + create mode 100644 drivers/usb/host/mtk-phy-7621.c + create mode 100644 drivers/usb/host/mtk-phy-7621.h + create mode 100644 drivers/usb/host/mtk-phy-ahb.c + create mode 100644 drivers/usb/host/mtk-phy.c + create mode 100644 drivers/usb/host/mtk-phy.h + create mode 100644 drivers/usb/host/xhci-mtk-power.c + create mode 100644 drivers/usb/host/xhci-mtk-power.h + create mode 100644 drivers/usb/host/xhci-mtk-scheduler.c + create mode 100644 drivers/usb/host/xhci-mtk-scheduler.h + create mode 100644 drivers/usb/host/xhci-mtk.c + create mode 100644 drivers/usb/host/xhci-mtk.h + +diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c +index d59d993..81bbb65 100644 +--- a/drivers/usb/core/hcd-pci.c ++++ b/drivers/usb/core/hcd-pci.c +@@ -215,9 +215,13 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) + goto disable_pci; + } + ++ ++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM ++ hcd->amd_resume_bug = 0; ++#else + hcd->amd_resume_bug = (usb_hcd_amd_remote_wakeup_quirk(dev) && + driver->flags & (HCD_USB11 | HCD_USB3)) ? 1 : 0; +- ++#endif + if (driver->flags & HCD_MEMORY) { + /* EHCI, OHCI */ + hcd->rsrc_start = pci_resource_start(dev, 0); +diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c +index 64ea219..c8cf5a6 100644 +--- a/drivers/usb/core/hub.c ++++ b/drivers/usb/core/hub.c +@@ -1251,7 +1251,7 @@ static void hub_quiesce(struct usb_hub *hub, enum hub_quiescing_type type) + if (type != HUB_SUSPEND) { + /* Disconnect all the children */ + for (i = 0; i < hdev->maxchild; ++i) { +- if (hub->ports[i]->child) ++ if (hub->ports[i] && hub->ports[i]->child) + usb_disconnect(&hub->ports[i]->child); + } + } +diff --git a/drivers/usb/core/port.c b/drivers/usb/core/port.c +index 51542f8..0b9e0b3 100644 +--- a/drivers/usb/core/port.c ++++ b/drivers/usb/core/port.c +@@ -191,6 +191,7 @@ exit: + void usb_hub_remove_port_device(struct usb_hub *hub, + int port1) + { +- device_unregister(&hub->ports[port1 - 1]->dev); ++ if (hub->ports[port1 - 1]) ++ device_unregister(&hub->ports[port1 - 1]->dev); + } + +diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig +index a9707da..22aab121 100644 +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -27,7 +27,13 @@ config USB_XHCI_HCD + if USB_XHCI_HCD + + config USB_XHCI_PLATFORM +- tristate ++ bool "xHCI platform" ++ depends on SOC_MT7621 ++ ++config USB_MT7621_XHCI_PLATFORM ++ bool "MTK MT7621 xHCI" ++ depends on USB_XHCI_PLATFORM ++ depends on SOC_MT7621 + + endif # USB_XHCI_HCD + +diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile +index 7530468..6614620 100644 +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -15,7 +15,13 @@ fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o + xhci-hcd-y := xhci.o xhci-mem.o + xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o + xhci-hcd-y += xhci-trace.o ++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM + xhci-hcd-$(CONFIG_PCI) += xhci-pci.o ++endif ++ ++ifdef CONFIG_USB_MT7621_XHCI_PLATFORM ++xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o ++endif + + ifneq ($(CONFIG_USB_XHCI_PLATFORM), ) + xhci-hcd-y += xhci-plat.o +@@ -23,7 +29,9 @@ endif + + obj-$(CONFIG_USB_WHCI_HCD) += whci/ + ++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM + obj-$(CONFIG_PCI) += pci-quirks.o ++endif + + obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o + obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o +diff --git a/drivers/usb/host/mtk-phy-7621.c b/drivers/usb/host/mtk-phy-7621.c +new file mode 100644 +index 0000000..4e9c0d7 +--- /dev/null ++++ b/drivers/usb/host/mtk-phy-7621.c +@@ -0,0 +1,445 @@ ++#include "mtk-phy.h" ++ ++#ifdef CONFIG_PROJECT_7621 ++#include "mtk-phy-7621.h" ++ ++//not used on SoC ++PHY_INT32 phy_init(struct u3phy_info *info){ ++ return PHY_TRUE; ++} ++ ++//not used on SoC ++PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){ ++ return PHY_TRUE; ++} ++ ++//-------------------------------------------------------- ++// Function : fgEyeScanHelper_CheckPtInRegion() ++// Description : Check if the test point is in a rectangle region. ++// If it is in the rectangle, also check if this point ++// is on the multiple of deltaX and deltaY. ++// Parameter : strucScanRegion * prEye - the region ++// BYTE bX ++// BYTE bY ++// Return : BYTE - TRUE : This point needs to be tested ++// FALSE: This point will be omitted ++// Note : First check within the rectangle. ++// Secondly, use modulous to check if the point will be tested. ++//-------------------------------------------------------- ++static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY) ++{ ++ PHY_INT8 fgValid = true; ++ ++ ++ /// Be careful, the axis origin is on the TOP-LEFT corner. ++ /// Therefore the top-left point has the minimum X and Y ++ /// Botton-right point is the maximum X and Y ++ if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br) ++ && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br)) ++ { ++ // With the region, now check whether or not the input test point is ++ // on the multiples of X and Y ++ // Do not have to worry about negative value, because we have already ++ // check the input bX, and bY is within the region. ++ if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX)) ++ || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) ) ++ { ++ // if the division will have remainder, that means ++ // the input test point is on the multiples of X and Y ++ fgValid = false; ++ } ++ else ++ { ++ } ++ } ++ else ++ { ++ ++ fgValid = false; ++ } ++ return fgValid; ++} ++ ++//-------------------------------------------------------- ++// Function : EyeScanHelper_RunTest() ++// Description : Enable the test, and wait til it is completed ++// Parameter : None ++// Return : None ++// Note : None ++//-------------------------------------------------------- ++static void EyeScanHelper_RunTest(struct u3phy_info *info) ++{ ++ DRV_UDELAY(100); ++ // Disable the test ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0); //RG_SSUSB_RX_EYE_CNT_EN = 0 ++ DRV_UDELAY(100); ++ // Run the test ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1); //RG_SSUSB_RX_EYE_CNT_EN = 1 ++ DRV_UDELAY(100); ++ // Wait til it's done ++ //RGS_SSUSB_RX_EYE_CNT_RDY ++ while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5) ++ , RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY)); ++} ++ ++//-------------------------------------------------------- ++// Function : fgEyeScanHelper_CalNextPoint() ++// Description : Calcualte the test point for the measurement ++// Parameter : None ++// Return : BOOL - TRUE : the next point is within the ++// boundaryof HW limit ++// FALSE: the next point is out of the HW limit ++// Note : The next point is obtained by calculating ++// from the bottom left of the region rectangle ++// and then scanning up until it reaches the upper ++// limit. At this time, the x will increment, and ++// start scanning downwards until the y hits the ++// zero. ++//-------------------------------------------------------- ++static PHY_INT8 fgEyeScanHelper_CalNextPoint(void) ++{ ++ if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN)) ++ || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP)) ++ ) ++ { ++ /// Reaches the limit of Y axis ++ /// Increment X ++ _bXcurr++; ++ _fgXChged = true; ++ _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP; ++ ++ if (_bXcurr > MAX_X) ++ { ++ return false; ++ } ++ } ++ else ++ { ++ _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1; ++ _fgXChged = false; ++ } ++ return PHY_TRUE; ++} ++ ++PHY_INT32 eyescan_init(struct u3phy_info *info){ ++ //initial PHY setting ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega) ++ , RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1); ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3) ++ , RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1); ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1 ++ return PHY_TRUE; ++} ++ ++PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y ++ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){ ++ PHY_INT32 cOfst = 0; ++ PHY_UINT8 bIdxX = 0; ++ PHY_UINT8 bIdxY = 0; ++ //PHY_INT8 bCnt = 0; ++ PHY_UINT8 bIdxCycCnt = 0; ++ PHY_INT8 fgValid; ++ PHY_INT8 cX; ++ PHY_INT8 cY; ++ PHY_UINT8 bExtendCnt; ++ PHY_INT8 isContinue; ++ //PHY_INT8 isBreak; ++ PHY_UINT32 wErr0 = 0, wErr1 = 0; ++ //PHY_UINT32 temp; ++ ++ PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; ++ PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; ++ ++ _rEye1.bX_tl = x_t1; ++ _rEye1.bY_tl = y_t1; ++ _rEye1.bX_br = x_br; ++ _rEye1.bY_br = y_br; ++ _rEye1.bDeltaX = delta_x; ++ _rEye1.bDeltaY = delta_y; ++ ++ _rEye2.bX_tl = x_t1; ++ _rEye2.bY_tl = y_t1; ++ _rEye2.bX_br = x_br; ++ _rEye2.bY_br = y_br; ++ _rEye2.bDeltaX = delta_x; ++ _rEye2.bDeltaY = delta_y; ++ ++ _rTestCycle.wEyeCnt = eye_cnt; ++ _rTestCycle.bNumOfEyeCnt = num_cnt; ++ _rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt; ++ _rTestCycle.bPICalEn = PI_cal_en; ++ ++ _bXcurr = 0; ++ _bYcurr = 0; ++ _eScanDir = SCAN_DN; ++ _fgXChged = false; ++ ++ printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \ ++ eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \ ++ x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt); ++ ++ //force SIGDET to OFF ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1); //RG_SSUSB_RX_SIGDET_SEL = 1 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0); //RG_SSUSB_RX_SIGDET_EN = 0 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1) ++ , RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0); //RG_SSUSB_RX_SIGDET = 0 ++ ++ // RX_TRI_DET_EN to Disable ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3) ++ , RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0); //RG_SSUSB_RX_TRI_DET_EN = 0 ++ ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0); //RG_SSUSB_RX_EYE_XOFFSET = 0 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0); //RG_SSUSB_RX_EYE0_Y = 0 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0); //RG_SSUSB_RX_EYE1_Y = 0 ++ ++ ++ if (PI_cal_en){ ++ // PI Calibration ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1 ++ ++ DRV_UDELAY(20); ++ ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0 ++ _bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5) ++ , RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO); //read RGS_SSUSB_RX_PILPO ++ ++ printk(KERN_ERR "PI result: %d\n", _bPIResult); ++ } ++ // Read Initial DAC ++ // Set CYCLE ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3) ++ ,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt); //RG_SSUSB_RX_EYE_CNT ++ ++ // Eye Monitor Feature ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1) ++ , RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff); //RG_SSUSB_RX_EYE_MASK = 0x3ff ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1 ++ ++ // Move X,Y to the top-left corner ++ for (cOfst = 0; cOfst >= -64; cOfst--) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ ,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET ++ } ++ for (cOfst = 0; cOfst < 64; cOfst++) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); //RG_SSUSB_RX_EYE0_Y ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); //RG_SSUSB_RX_EYE1_Y ++ } ++ //ClearErrorResult ++ for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){ ++ for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++) ++ { ++ for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){ ++ pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0; ++ pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0; ++ } ++ } ++ } ++ isContinue = true; ++ while(isContinue){ ++ //printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr); ++ // The point is within the boundary, then let's check if it is within ++ // the testing region. ++ // The point is only test-able if one of the eye region ++ // includes this point. ++ fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr) ++ || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr); ++ // Translate bX and bY to 2's complement from where the origin was on the ++ // top left corner. ++ // 0x40 and 0x3F needs a bit of thinking!!!! >"< ++ cX = (_bXcurr ^ 0x40); ++ cY = (_bYcurr ^ 0x3F); ++ ++ // Set X if necessary ++ if (_fgXChged == true) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX); //RG_SSUSB_RX_EYE_XOFFSET ++ } ++ // Set Y ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY); //RG_SSUSB_RX_EYE0_Y ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY); //RG_SSUSB_RX_EYE1_Y ++ ++ /// Test this point! ++ if (fgValid){ ++ for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++) ++ { ++ //run test ++ EyeScanHelper_RunTest(info); ++ } ++ for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++) ++ { ++ EyeScanHelper_RunTest(info); ++ wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3) ++ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0); ++ wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4) ++ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1); ++ ++ pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0; ++ pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1; ++ ++ //EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]); ++// printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n" ++// , bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]); ++ } ++ //printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]); ++ } ++ else{ ++ ++ } ++ if (fgEyeScanHelper_CalNextPoint() == false){ ++#if 0 ++ printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr); ++ printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY); ++#endif ++ printk(KERN_ERR "end of eye scan\n"); ++ isContinue = false; ++ } ++ } ++ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n" ++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET) ++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y)); ++ ++ // Move X,Y to the top-left corner ++ for (cOfst = 63; cOfst >= 0; cOfst--) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET ++ } ++ for (cOfst = 63; cOfst >= 0; cOfst--) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); ++ ++ } ++ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n" ++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET) ++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y)); ++ ++ printk(KERN_ERR "PI result: %d\n", _bPIResult); ++ printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0); ++ printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1); ++ ++ return PHY_TRUE; ++} ++ ++//not used on SoC ++PHY_INT32 u2_save_cur_en(struct u3phy_info *info){ ++ return PHY_TRUE; ++} ++ ++//not used on SoC ++PHY_INT32 u2_save_cur_re(struct u3phy_info *info){ ++ return PHY_TRUE; ++} ++ ++PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){ ++ PHY_INT32 i=0; ++ //PHY_INT32 j=0; ++ //PHY_INT8 u1SrCalVal = 0; ++ //PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN; ++ PHY_INT32 fgRet = 0; ++ PHY_INT32 u4FmOut = 0; ++ PHY_INT32 u4Tmp = 0; ++ //PHY_INT32 temp; ++ ++ // => RG_USB20_HSTX_SRCAL_EN = 1 ++ // enable HS TX SR calibration ++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) ++ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1); ++ DRV_MSLEEP(1); ++ ++ // => RG_FRCK_EN = 1 ++ // Enable free run clock ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1) ++ , RG_FRCK_EN_OFST, RG_FRCK_EN, 1); ++ ++ // MT6290 HS signal quality patch ++ // => RG_CYCLECNT = 400 ++ // Setting cyclecnt =400 ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) ++ , RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400); ++ ++ // => RG_FREQDET_EN = 1 ++ // Enable frequency meter ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) ++ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1); ++ ++ // wait for FM detection done, set 10ms timeout ++ for(i=0; i<10; i++){ ++ // => u4FmOut = USB_FM_OUT ++ // read FM_OUT ++ u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0)); ++ printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut); ++ ++ // check if FM detection done ++ if (u4FmOut != 0) ++ { ++ fgRet = 0; ++ printk("FM detection done! loop = %d\n", i); ++ ++ break; ++ } ++ ++ fgRet = 1; ++ DRV_MSLEEP(1); ++ } ++ // => RG_FREQDET_EN = 0 ++ // disable frequency meter ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) ++ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0); ++ ++ // => RG_FRCK_EN = 0 ++ // disable free run clock ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1) ++ , RG_FRCK_EN_OFST, RG_FRCK_EN, 0); ++ ++ // => RG_USB20_HSTX_SRCAL_EN = 0 ++ // disable HS TX SR calibration ++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) ++ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0); ++ DRV_MSLEEP(1); ++ ++ if(u4FmOut == 0){ ++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) ++ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4); ++ ++ fgRet = 1; ++ } ++ else{ ++ // set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits) ++ u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000; ++ printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp); ++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) ++ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp); ++ } ++ return fgRet; ++} ++ ++#endif +diff --git a/drivers/usb/host/mtk-phy-7621.h b/drivers/usb/host/mtk-phy-7621.h +new file mode 100644 +index 0000000..41b0c77 +--- /dev/null ++++ b/drivers/usb/host/mtk-phy-7621.h +@@ -0,0 +1,2871 @@ ++#ifdef CONFIG_PROJECT_7621 ++#ifndef __MTK_PHY_7621_H ++#define __MTK_PHY_7621_H ++ ++#define U2_SR_COEF_7621 28 ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u2phy_reg { ++ //0x0 ++ PHY_LE32 u2phyac0; ++ PHY_LE32 u2phyac1; ++ PHY_LE32 u2phyac2; ++ PHY_LE32 reserve0; ++ //0x10 ++ PHY_LE32 u2phyacr0; ++ PHY_LE32 u2phyacr1; ++ PHY_LE32 u2phyacr2; ++ PHY_LE32 u2phyacr3; ++ //0x20 ++ PHY_LE32 u2phyacr4; ++ PHY_LE32 u2phyamon0; ++ PHY_LE32 reserve1[2]; ++ //0x30~0x50 ++ PHY_LE32 reserve2[12]; ++ //0x60 ++ PHY_LE32 u2phydcr0; ++ PHY_LE32 u2phydcr1; ++ PHY_LE32 u2phydtm0; ++ PHY_LE32 u2phydtm1; ++ //0x70 ++ PHY_LE32 u2phydmon0; ++ PHY_LE32 u2phydmon1; ++ PHY_LE32 u2phydmon2; ++ PHY_LE32 u2phydmon3; ++ //0x80 ++ PHY_LE32 u2phybc12c; ++ PHY_LE32 u2phybc12c1; ++ PHY_LE32 reserve3[2]; ++ //0x90~0xe0 ++ PHY_LE32 reserve4[24]; ++ //0xf0 ++ PHY_LE32 reserve6[3]; ++ PHY_LE32 regfcom; ++}; ++ ++//U3D_U2PHYAC0 ++#define RG_USB20_USBPLL_DIVEN (0x7<<28) //30:28 ++#define RG_USB20_USBPLL_CKCTRL (0x3<<26) //27:26 ++#define RG_USB20_USBPLL_PREDIV (0x3<<24) //25:24 ++#define RG_USB20_USBPLL_FORCE_ON (0x1<<23) //23:23 ++#define RG_USB20_USBPLL_FBDIV (0x7f<<16) //22:16 ++#define RG_USB20_REF_EN (0x1<<15) //15:15 ++#define RG_USB20_INTR_EN (0x1<<14) //14:14 ++#define RG_USB20_BG_TRIM (0xf<<8) //11:8 ++#define RG_USB20_BG_RBSEL (0x3<<6) //7:6 ++#define RG_USB20_BG_RASEL (0x3<<4) //5:4 ++#define RG_USB20_BGR_DIV (0x3<<2) //3:2 ++#define RG_SIFSLV_CHP_EN (0x1<<1) //1:1 ++#define RG_SIFSLV_BGR_EN (0x1<<0) //0:0 ++ ++//U3D_U2PHYAC1 ++#define RG_USB20_VRT_VREF_SEL (0x7<<28) //30:28 ++#define RG_USB20_TERM_VREF_SEL (0x7<<24) //26:24 ++#define RG_USB20_MPX_SEL (0xff<<16) //23:16 ++#define RG_USB20_MPX_OUT_SEL (0x3<<12) //13:12 ++#define RG_USB20_TX_PH_ROT_SEL (0x7<<8) //10:8 ++#define RG_USB20_USBPLL_ACCEN (0x1<<3) //3:3 ++#define RG_USB20_USBPLL_LF (0x1<<2) //2:2 ++#define RG_USB20_USBPLL_BR (0x1<<1) //1:1 ++#define RG_USB20_USBPLL_BP (0x1<<0) //0:0 ++ ++//U3D_U2PHYAC2 ++#define RG_SIFSLV_MAC_BANDGAP_EN (0x1<<17) //17:17 ++#define RG_SIFSLV_MAC_CHOPPER_EN (0x1<<16) //16:16 ++#define RG_USB20_CLKREF_REV (0xff<<0) //7:0 ++ ++//U3D_U2PHYACR0 ++#define RG_USB20_ICUSB_EN (0x1<<24) //24:24 ++#define RG_USB20_HSTX_SRCAL_EN (0x1<<23) //23:23 ++#define RG_USB20_HSTX_SRCTRL (0x7<<16) //18:16 ++#define RG_USB20_LS_CR (0x7<<12) //14:12 ++#define RG_USB20_FS_CR (0x7<<8) //10:8 ++#define RG_USB20_LS_SR (0x7<<4) //6:4 ++#define RG_USB20_FS_SR (0x7<<0) //2:0 ++ ++//U3D_U2PHYACR1 ++#define RG_USB20_INIT_SQ_EN_DG (0x3<<28) //29:28 ++#define RG_USB20_SQD (0x3<<24) //25:24 ++#define RG_USB20_HSTX_TMODE_SEL (0x3<<20) //21:20 ++#define RG_USB20_HSTX_TMODE_EN (0x1<<19) //19:19 ++#define RG_USB20_PHYD_MONEN (0x1<<18) //18:18 ++#define RG_USB20_INLPBK_EN (0x1<<17) //17:17 ++#define RG_USB20_CHIRP_EN (0x1<<16) //16:16 ++#define RG_USB20_DM_ABIST_SOURCE_EN (0x1<<15) //15:15 ++#define RG_USB20_DM_ABIST_SELE (0xf<<8) //11:8 ++#define RG_USB20_DP_ABIST_SOURCE_EN (0x1<<7) //7:7 ++#define RG_USB20_DP_ABIST_SELE (0xf<<0) //3:0 ++ ++//U3D_U2PHYACR2 ++#define RG_USB20_OTG_ABIST_SELE (0x7<<29) //31:29 ++#define RG_USB20_OTG_ABIST_EN (0x1<<28) //28:28 ++#define RG_USB20_OTG_VBUSCMP_EN (0x1<<27) //27:27 ++#define RG_USB20_OTG_VBUSTH (0x7<<24) //26:24 ++#define RG_USB20_DISC_FIT_EN (0x1<<22) //22:22 ++#define RG_USB20_DISCD (0x3<<20) //21:20 ++#define RG_USB20_DISCTH (0xf<<16) //19:16 ++#define RG_USB20_SQCAL_EN (0x1<<15) //15:15 ++#define RG_USB20_SQCAL (0xf<<8) //11:8 ++#define RG_USB20_SQTH (0xf<<0) //3:0 ++ ++//U3D_U2PHYACR3 ++#define RG_USB20_HSTX_DBIST (0xf<<28) //31:28 ++#define RG_USB20_HSTX_BIST_EN (0x1<<26) //26:26 ++#define RG_USB20_HSTX_I_EN_MODE (0x3<<24) //25:24 ++#define RG_USB20_HSRX_TMODE_EN (0x1<<23) //23:23 ++#define RG_USB20_HSRX_BIAS_EN_SEL (0x3<<20) //21:20 ++#define RG_USB20_USB11_TMODE_EN (0x1<<19) //19:19 ++#define RG_USB20_TMODE_FS_LS_TX_EN (0x1<<18) //18:18 ++#define RG_USB20_TMODE_FS_LS_RCV_EN (0x1<<17) //17:17 ++#define RG_USB20_TMODE_FS_LS_MODE (0x1<<16) //16:16 ++#define RG_USB20_HS_TERM_EN_MODE (0x3<<13) //14:13 ++#define RG_USB20_PUPD_BIST_EN (0x1<<12) //12:12 ++#define RG_USB20_EN_PU_DM (0x1<<11) //11:11 ++#define RG_USB20_EN_PD_DM (0x1<<10) //10:10 ++#define RG_USB20_EN_PU_DP (0x1<<9) //9:9 ++#define RG_USB20_EN_PD_DP (0x1<<8) //8:8 ++#define RG_USB20_PHY_REV (0xff<<0) //7:0 ++ ++//U3D_U2PHYACR4 ++#define RG_USB20_DP_100K_MODE (0x1<<18) //18:18 ++#define RG_USB20_DM_100K_EN (0x1<<17) //17:17 ++#define USB20_DP_100K_EN (0x1<<16) //16:16 ++#define USB20_GPIO_DM_I (0x1<<15) //15:15 ++#define USB20_GPIO_DP_I (0x1<<14) //14:14 ++#define USB20_GPIO_DM_OE (0x1<<13) //13:13 ++#define USB20_GPIO_DP_OE (0x1<<12) //12:12 ++#define RG_USB20_GPIO_CTL (0x1<<9) //9:9 ++#define USB20_GPIO_MODE (0x1<<8) //8:8 ++#define RG_USB20_TX_BIAS_EN (0x1<<5) //5:5 ++#define RG_USB20_TX_VCMPDN_EN (0x1<<4) //4:4 ++#define RG_USB20_HS_SQ_EN_MODE (0x3<<2) //3:2 ++#define RG_USB20_HS_RCV_EN_MODE (0x3<<0) //1:0 ++ ++//U3D_U2PHYAMON0 ++#define RGO_USB20_GPIO_DM_O (0x1<<1) //1:1 ++#define RGO_USB20_GPIO_DP_O (0x1<<0) //0:0 ++ ++//U3D_U2PHYDCR0 ++#define RG_USB20_CDR_TST (0x3<<30) //31:30 ++#define RG_USB20_GATED_ENB (0x1<<29) //29:29 ++#define RG_USB20_TESTMODE (0x3<<26) //27:26 ++#define RG_USB20_PLL_STABLE (0x1<<25) //25:25 ++#define RG_USB20_PLL_FORCE_ON (0x1<<24) //24:24 ++#define RG_USB20_PHYD_RESERVE (0xffff<<8) //23:8 ++#define RG_USB20_EBTHRLD (0x1<<7) //7:7 ++#define RG_USB20_EARLY_HSTX_I (0x1<<6) //6:6 ++#define RG_USB20_TX_TST (0x1<<5) //5:5 ++#define RG_USB20_NEGEDGE_ENB (0x1<<4) //4:4 ++#define RG_USB20_CDR_FILT (0xf<<0) //3:0 ++ ++//U3D_U2PHYDCR1 ++#define RG_USB20_PROBE_SEL (0xff<<24) //31:24 ++#define RG_USB20_DRVVBUS (0x1<<23) //23:23 ++#define RG_DEBUG_EN (0x1<<22) //22:22 ++#define RG_USB20_OTG_PROBE (0x3<<20) //21:20 ++#define RG_USB20_SW_PLLMODE (0x3<<18) //19:18 ++#define RG_USB20_BERTH (0x3<<16) //17:16 ++#define RG_USB20_LBMODE (0x3<<13) //14:13 ++#define RG_USB20_FORCE_TAP (0x1<<12) //12:12 ++#define RG_USB20_TAPSEL (0xfff<<0) //11:0 ++ ++//U3D_U2PHYDTM0 ++#define RG_UART_MODE (0x3<<30) //31:30 ++#define FORCE_UART_I (0x1<<29) //29:29 ++#define FORCE_UART_BIAS_EN (0x1<<28) //28:28 ++#define FORCE_UART_TX_OE (0x1<<27) //27:27 ++#define FORCE_UART_EN (0x1<<26) //26:26 ++#define FORCE_USB_CLKEN (0x1<<25) //25:25 ++#define FORCE_DRVVBUS (0x1<<24) //24:24 ++#define FORCE_DATAIN (0x1<<23) //23:23 ++#define FORCE_TXVALID (0x1<<22) //22:22 ++#define FORCE_DM_PULLDOWN (0x1<<21) //21:21 ++#define FORCE_DP_PULLDOWN (0x1<<20) //20:20 ++#define FORCE_XCVRSEL (0x1<<19) //19:19 ++#define FORCE_SUSPENDM (0x1<<18) //18:18 ++#define FORCE_TERMSEL (0x1<<17) //17:17 ++#define FORCE_OPMODE (0x1<<16) //16:16 ++#define UTMI_MUXSEL (0x1<<15) //15:15 ++#define RG_RESET (0x1<<14) //14:14 ++#define RG_DATAIN (0xf<<10) //13:10 ++#define RG_TXVALIDH (0x1<<9) //9:9 ++#define RG_TXVALID (0x1<<8) //8:8 ++#define RG_DMPULLDOWN (0x1<<7) //7:7 ++#define RG_DPPULLDOWN (0x1<<6) //6:6 ++#define RG_XCVRSEL (0x3<<4) //5:4 ++#define RG_SUSPENDM (0x1<<3) //3:3 ++#define RG_TERMSEL (0x1<<2) //2:2 ++#define RG_OPMODE (0x3<<0) //1:0 ++ ++//U3D_U2PHYDTM1 ++#define RG_USB20_PRBS7_EN (0x1<<31) //31:31 ++#define RG_USB20_PRBS7_BITCNT (0x3f<<24) //29:24 ++#define RG_USB20_CLK48M_EN (0x1<<23) //23:23 ++#define RG_USB20_CLK60M_EN (0x1<<22) //22:22 ++#define RG_UART_I (0x1<<19) //19:19 ++#define RG_UART_BIAS_EN (0x1<<18) //18:18 ++#define RG_UART_TX_OE (0x1<<17) //17:17 ++#define RG_UART_EN (0x1<<16) //16:16 ++#define FORCE_VBUSVALID (0x1<<13) //13:13 ++#define FORCE_SESSEND (0x1<<12) //12:12 ++#define FORCE_BVALID (0x1<<11) //11:11 ++#define FORCE_AVALID (0x1<<10) //10:10 ++#define FORCE_IDDIG (0x1<<9) //9:9 ++#define FORCE_IDPULLUP (0x1<<8) //8:8 ++#define RG_VBUSVALID (0x1<<5) //5:5 ++#define RG_SESSEND (0x1<<4) //4:4 ++#define RG_BVALID (0x1<<3) //3:3 ++#define RG_AVALID (0x1<<2) //2:2 ++#define RG_IDDIG (0x1<<1) //1:1 ++#define RG_IDPULLUP (0x1<<0) //0:0 ++ ++//U3D_U2PHYDMON0 ++#define RG_USB20_PRBS7_BERTH (0xff<<0) //7:0 ++ ++//U3D_U2PHYDMON1 ++#define USB20_UART_O (0x1<<31) //31:31 ++#define RGO_USB20_LB_PASS (0x1<<30) //30:30 ++#define RGO_USB20_LB_DONE (0x1<<29) //29:29 ++#define AD_USB20_BVALID (0x1<<28) //28:28 ++#define USB20_IDDIG (0x1<<27) //27:27 ++#define AD_USB20_VBUSVALID (0x1<<26) //26:26 ++#define AD_USB20_SESSEND (0x1<<25) //25:25 ++#define AD_USB20_AVALID (0x1<<24) //24:24 ++#define USB20_LINE_STATE (0x3<<22) //23:22 ++#define USB20_HST_DISCON (0x1<<21) //21:21 ++#define USB20_TX_READY (0x1<<20) //20:20 ++#define USB20_RX_ERROR (0x1<<19) //19:19 ++#define USB20_RX_ACTIVE (0x1<<18) //18:18 ++#define USB20_RX_VALIDH (0x1<<17) //17:17 ++#define USB20_RX_VALID (0x1<<16) //16:16 ++#define USB20_DATA_OUT (0xffff<<0) //15:0 ++ ++//U3D_U2PHYDMON2 ++#define RGO_TXVALID_CNT (0xff<<24) //31:24 ++#define RGO_RXACTIVE_CNT (0xff<<16) //23:16 ++#define RGO_USB20_LB_BERCNT (0xff<<8) //15:8 ++#define USB20_PROBE_OUT (0xff<<0) //7:0 ++ ++//U3D_U2PHYDMON3 ++#define RGO_USB20_PRBS7_ERRCNT (0xffff<<16) //31:16 ++#define RGO_USB20_PRBS7_DONE (0x1<<3) //3:3 ++#define RGO_USB20_PRBS7_LOCK (0x1<<2) //2:2 ++#define RGO_USB20_PRBS7_PASS (0x1<<1) //1:1 ++#define RGO_USB20_PRBS7_PASSTH (0x1<<0) //0:0 ++ ++//U3D_U2PHYBC12C ++#define RG_SIFSLV_CHGDT_DEGLCH_CNT (0xf<<28) //31:28 ++#define RG_SIFSLV_CHGDT_CTRL_CNT (0xf<<24) //27:24 ++#define RG_SIFSLV_CHGDT_FORCE_MODE (0x1<<16) //16:16 ++#define RG_CHGDT_ISRC_LEV (0x3<<14) //15:14 ++#define RG_CHGDT_VDATSRC (0x1<<13) //13:13 ++#define RG_CHGDT_BGVREF_SEL (0x7<<10) //12:10 ++#define RG_CHGDT_RDVREF_SEL (0x3<<8) //9:8 ++#define RG_CHGDT_ISRC_DP (0x1<<7) //7:7 ++#define RG_SIFSLV_CHGDT_OPOUT_DM (0x1<<6) //6:6 ++#define RG_CHGDT_VDAT_DM (0x1<<5) //5:5 ++#define RG_CHGDT_OPOUT_DP (0x1<<4) //4:4 ++#define RG_SIFSLV_CHGDT_VDAT_DP (0x1<<3) //3:3 ++#define RG_SIFSLV_CHGDT_COMP_EN (0x1<<2) //2:2 ++#define RG_SIFSLV_CHGDT_OPDRV_EN (0x1<<1) //1:1 ++#define RG_CHGDT_EN (0x1<<0) //0:0 ++ ++//U3D_U2PHYBC12C1 ++#define RG_CHGDT_REV (0xff<<0) //7:0 ++ ++//U3D_REGFCOM ++#define RG_PAGE (0xff<<24) //31:24 ++#define I2C_MODE (0x1<<16) //16:16 ++ ++ ++/* OFFSET */ ++ ++//U3D_U2PHYAC0 ++#define RG_USB20_USBPLL_DIVEN_OFST (28) ++#define RG_USB20_USBPLL_CKCTRL_OFST (26) ++#define RG_USB20_USBPLL_PREDIV_OFST (24) ++#define RG_USB20_USBPLL_FORCE_ON_OFST (23) ++#define RG_USB20_USBPLL_FBDIV_OFST (16) ++#define RG_USB20_REF_EN_OFST (15) ++#define RG_USB20_INTR_EN_OFST (14) ++#define RG_USB20_BG_TRIM_OFST (8) ++#define RG_USB20_BG_RBSEL_OFST (6) ++#define RG_USB20_BG_RASEL_OFST (4) ++#define RG_USB20_BGR_DIV_OFST (2) ++#define RG_SIFSLV_CHP_EN_OFST (1) ++#define RG_SIFSLV_BGR_EN_OFST (0) ++ ++//U3D_U2PHYAC1 ++#define RG_USB20_VRT_VREF_SEL_OFST (28) ++#define RG_USB20_TERM_VREF_SEL_OFST (24) ++#define RG_USB20_MPX_SEL_OFST (16) ++#define RG_USB20_MPX_OUT_SEL_OFST (12) ++#define RG_USB20_TX_PH_ROT_SEL_OFST (8) ++#define RG_USB20_USBPLL_ACCEN_OFST (3) ++#define RG_USB20_USBPLL_LF_OFST (2) ++#define RG_USB20_USBPLL_BR_OFST (1) ++#define RG_USB20_USBPLL_BP_OFST (0) ++ ++//U3D_U2PHYAC2 ++#define RG_SIFSLV_MAC_BANDGAP_EN_OFST (17) ++#define RG_SIFSLV_MAC_CHOPPER_EN_OFST (16) ++#define RG_USB20_CLKREF_REV_OFST (0) ++ ++//U3D_U2PHYACR0 ++#define RG_USB20_ICUSB_EN_OFST (24) ++#define RG_USB20_HSTX_SRCAL_EN_OFST (23) ++#define RG_USB20_HSTX_SRCTRL_OFST (16) ++#define RG_USB20_LS_CR_OFST (12) ++#define RG_USB20_FS_CR_OFST (8) ++#define RG_USB20_LS_SR_OFST (4) ++#define RG_USB20_FS_SR_OFST (0) ++ ++//U3D_U2PHYACR1 ++#define RG_USB20_INIT_SQ_EN_DG_OFST (28) ++#define RG_USB20_SQD_OFST (24) ++#define RG_USB20_HSTX_TMODE_SEL_OFST (20) ++#define RG_USB20_HSTX_TMODE_EN_OFST (19) ++#define RG_USB20_PHYD_MONEN_OFST (18) ++#define RG_USB20_INLPBK_EN_OFST (17) ++#define RG_USB20_CHIRP_EN_OFST (16) ++#define RG_USB20_DM_ABIST_SOURCE_EN_OFST (15) ++#define RG_USB20_DM_ABIST_SELE_OFST (8) ++#define RG_USB20_DP_ABIST_SOURCE_EN_OFST (7) ++#define RG_USB20_DP_ABIST_SELE_OFST (0) ++ ++//U3D_U2PHYACR2 ++#define RG_USB20_OTG_ABIST_SELE_OFST (29) ++#define RG_USB20_OTG_ABIST_EN_OFST (28) ++#define RG_USB20_OTG_VBUSCMP_EN_OFST (27) ++#define RG_USB20_OTG_VBUSTH_OFST (24) ++#define RG_USB20_DISC_FIT_EN_OFST (22) ++#define RG_USB20_DISCD_OFST (20) ++#define RG_USB20_DISCTH_OFST (16) ++#define RG_USB20_SQCAL_EN_OFST (15) ++#define RG_USB20_SQCAL_OFST (8) ++#define RG_USB20_SQTH_OFST (0) ++ ++//U3D_U2PHYACR3 ++#define RG_USB20_HSTX_DBIST_OFST (28) ++#define RG_USB20_HSTX_BIST_EN_OFST (26) ++#define RG_USB20_HSTX_I_EN_MODE_OFST (24) ++#define RG_USB20_HSRX_TMODE_EN_OFST (23) ++#define RG_USB20_HSRX_BIAS_EN_SEL_OFST (20) ++#define RG_USB20_USB11_TMODE_EN_OFST (19) ++#define RG_USB20_TMODE_FS_LS_TX_EN_OFST (18) ++#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST (17) ++#define RG_USB20_TMODE_FS_LS_MODE_OFST (16) ++#define RG_USB20_HS_TERM_EN_MODE_OFST (13) ++#define RG_USB20_PUPD_BIST_EN_OFST (12) ++#define RG_USB20_EN_PU_DM_OFST (11) ++#define RG_USB20_EN_PD_DM_OFST (10) ++#define RG_USB20_EN_PU_DP_OFST (9) ++#define RG_USB20_EN_PD_DP_OFST (8) ++#define RG_USB20_PHY_REV_OFST (0) ++ ++//U3D_U2PHYACR4 ++#define RG_USB20_DP_100K_MODE_OFST (18) ++#define RG_USB20_DM_100K_EN_OFST (17) ++#define USB20_DP_100K_EN_OFST (16) ++#define USB20_GPIO_DM_I_OFST (15) ++#define USB20_GPIO_DP_I_OFST (14) ++#define USB20_GPIO_DM_OE_OFST (13) ++#define USB20_GPIO_DP_OE_OFST (12) ++#define RG_USB20_GPIO_CTL_OFST (9) ++#define USB20_GPIO_MODE_OFST (8) ++#define RG_USB20_TX_BIAS_EN_OFST (5) ++#define RG_USB20_TX_VCMPDN_EN_OFST (4) ++#define RG_USB20_HS_SQ_EN_MODE_OFST (2) ++#define RG_USB20_HS_RCV_EN_MODE_OFST (0) ++ ++//U3D_U2PHYAMON0 ++#define RGO_USB20_GPIO_DM_O_OFST (1) ++#define RGO_USB20_GPIO_DP_O_OFST (0) ++ ++//U3D_U2PHYDCR0 ++#define RG_USB20_CDR_TST_OFST (30) ++#define RG_USB20_GATED_ENB_OFST (29) ++#define RG_USB20_TESTMODE_OFST (26) ++#define RG_USB20_PLL_STABLE_OFST (25) ++#define RG_USB20_PLL_FORCE_ON_OFST (24) ++#define RG_USB20_PHYD_RESERVE_OFST (8) ++#define RG_USB20_EBTHRLD_OFST (7) ++#define RG_USB20_EARLY_HSTX_I_OFST (6) ++#define RG_USB20_TX_TST_OFST (5) ++#define RG_USB20_NEGEDGE_ENB_OFST (4) ++#define RG_USB20_CDR_FILT_OFST (0) ++ ++//U3D_U2PHYDCR1 ++#define RG_USB20_PROBE_SEL_OFST (24) ++#define RG_USB20_DRVVBUS_OFST (23) ++#define RG_DEBUG_EN_OFST (22) ++#define RG_USB20_OTG_PROBE_OFST (20) ++#define RG_USB20_SW_PLLMODE_OFST (18) ++#define RG_USB20_BERTH_OFST (16) ++#define RG_USB20_LBMODE_OFST (13) ++#define RG_USB20_FORCE_TAP_OFST (12) ++#define RG_USB20_TAPSEL_OFST (0) ++ ++//U3D_U2PHYDTM0 ++#define RG_UART_MODE_OFST (30) ++#define FORCE_UART_I_OFST (29) ++#define FORCE_UART_BIAS_EN_OFST (28) ++#define FORCE_UART_TX_OE_OFST (27) ++#define FORCE_UART_EN_OFST (26) ++#define FORCE_USB_CLKEN_OFST (25) ++#define FORCE_DRVVBUS_OFST (24) ++#define FORCE_DATAIN_OFST (23) ++#define FORCE_TXVALID_OFST (22) ++#define FORCE_DM_PULLDOWN_OFST (21) ++#define FORCE_DP_PULLDOWN_OFST (20) ++#define FORCE_XCVRSEL_OFST (19) ++#define FORCE_SUSPENDM_OFST (18) ++#define FORCE_TERMSEL_OFST (17) ++#define FORCE_OPMODE_OFST (16) ++#define UTMI_MUXSEL_OFST (15) ++#define RG_RESET_OFST (14) ++#define RG_DATAIN_OFST (10) ++#define RG_TXVALIDH_OFST (9) ++#define RG_TXVALID_OFST (8) ++#define RG_DMPULLDOWN_OFST (7) ++#define RG_DPPULLDOWN_OFST (6) ++#define RG_XCVRSEL_OFST (4) ++#define RG_SUSPENDM_OFST (3) ++#define RG_TERMSEL_OFST (2) ++#define RG_OPMODE_OFST (0) ++ ++//U3D_U2PHYDTM1 ++#define RG_USB20_PRBS7_EN_OFST (31) ++#define RG_USB20_PRBS7_BITCNT_OFST (24) ++#define RG_USB20_CLK48M_EN_OFST (23) ++#define RG_USB20_CLK60M_EN_OFST (22) ++#define RG_UART_I_OFST (19) ++#define RG_UART_BIAS_EN_OFST (18) ++#define RG_UART_TX_OE_OFST (17) ++#define RG_UART_EN_OFST (16) ++#define FORCE_VBUSVALID_OFST (13) ++#define FORCE_SESSEND_OFST (12) ++#define FORCE_BVALID_OFST (11) ++#define FORCE_AVALID_OFST (10) ++#define FORCE_IDDIG_OFST (9) ++#define FORCE_IDPULLUP_OFST (8) ++#define RG_VBUSVALID_OFST (5) ++#define RG_SESSEND_OFST (4) ++#define RG_BVALID_OFST (3) ++#define RG_AVALID_OFST (2) ++#define RG_IDDIG_OFST (1) ++#define RG_IDPULLUP_OFST (0) ++ ++//U3D_U2PHYDMON0 ++#define RG_USB20_PRBS7_BERTH_OFST (0) ++ ++//U3D_U2PHYDMON1 ++#define USB20_UART_O_OFST (31) ++#define RGO_USB20_LB_PASS_OFST (30) ++#define RGO_USB20_LB_DONE_OFST (29) ++#define AD_USB20_BVALID_OFST (28) ++#define USB20_IDDIG_OFST (27) ++#define AD_USB20_VBUSVALID_OFST (26) ++#define AD_USB20_SESSEND_OFST (25) ++#define AD_USB20_AVALID_OFST (24) ++#define USB20_LINE_STATE_OFST (22) ++#define USB20_HST_DISCON_OFST (21) ++#define USB20_TX_READY_OFST (20) ++#define USB20_RX_ERROR_OFST (19) ++#define USB20_RX_ACTIVE_OFST (18) ++#define USB20_RX_VALIDH_OFST (17) ++#define USB20_RX_VALID_OFST (16) ++#define USB20_DATA_OUT_OFST (0) ++ ++//U3D_U2PHYDMON2 ++#define RGO_TXVALID_CNT_OFST (24) ++#define RGO_RXACTIVE_CNT_OFST (16) ++#define RGO_USB20_LB_BERCNT_OFST (8) ++#define USB20_PROBE_OUT_OFST (0) ++ ++//U3D_U2PHYDMON3 ++#define RGO_USB20_PRBS7_ERRCNT_OFST (16) ++#define RGO_USB20_PRBS7_DONE_OFST (3) ++#define RGO_USB20_PRBS7_LOCK_OFST (2) ++#define RGO_USB20_PRBS7_PASS_OFST (1) ++#define RGO_USB20_PRBS7_PASSTH_OFST (0) ++ ++//U3D_U2PHYBC12C ++#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST (28) ++#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST (24) ++#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST (16) ++#define RG_CHGDT_ISRC_LEV_OFST (14) ++#define RG_CHGDT_VDATSRC_OFST (13) ++#define RG_CHGDT_BGVREF_SEL_OFST (10) ++#define RG_CHGDT_RDVREF_SEL_OFST (8) ++#define RG_CHGDT_ISRC_DP_OFST (7) ++#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST (6) ++#define RG_CHGDT_VDAT_DM_OFST (5) ++#define RG_CHGDT_OPOUT_DP_OFST (4) ++#define RG_SIFSLV_CHGDT_VDAT_DP_OFST (3) ++#define RG_SIFSLV_CHGDT_COMP_EN_OFST (2) ++#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST (1) ++#define RG_CHGDT_EN_OFST (0) ++ ++//U3D_U2PHYBC12C1 ++#define RG_CHGDT_REV_OFST (0) ++ ++//U3D_REGFCOM ++#define RG_PAGE_OFST (24) ++#define I2C_MODE_OFST (16) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u3phya_reg { ++ //0x0 ++ PHY_LE32 reg0; ++ PHY_LE32 reg1; ++ PHY_LE32 reg2; ++ PHY_LE32 reg3; ++ //0x10 ++ PHY_LE32 reg4; ++ PHY_LE32 reg5; ++ PHY_LE32 reg6; ++ PHY_LE32 reg7; ++ //0x20 ++ PHY_LE32 reg8; ++ PHY_LE32 reg9; ++ PHY_LE32 rega; ++ PHY_LE32 regb; ++ //0x30 ++ PHY_LE32 regc; ++ PHY_LE32 regd; ++ PHY_LE32 rege; ++}; ++ ++//U3D_reg0 ++#define RG_SSUSB_BGR_EN (0x1<<31) //31:31 ++#define RG_SSUSB_CHPEN (0x1<<30) //30:30 ++#define RG_SSUSB_BG_DIV (0x3<<28) //29:28 ++#define RG_SSUSB_INTR_EN (0x1<<26) //26:26 ++#define RG_SSUSB_MPX_OUT_SEL (0x3<<24) //25:24 ++#define RG_SSUSB_MPX_SEL (0xff<<16) //23:16 ++#define RG_SSUSB_REF_EN (0x1<<15) //15:15 ++#define RG_SSUSB_VRT_VREF_SEL (0xf<<11) //14:11 ++#define RG_SSUSB_BG_RASEL (0x3<<9) //10:9 ++#define RG_SSUSB_BG_RBSEL (0x3<<7) //8:7 ++#define RG_SSUSB_BG_MONEN (0x1<<6) //6:6 ++#define RG_PCIE_CLKDRV_OFFSET (0x3<<0) //1:0 ++ ++//U3D_reg1 ++#define RG_PCIE_CLKDRV_SLEW (0x3<<30) //31:30 ++#define RG_PCIE_CLKDRV_AMP (0x7<<27) //29:27 ++#define RG_SSUSB_XTAL_TST_A2DCK_EN (0x1<<26) //26:26 ++#define RG_SSUSB_XTAL_MON_EN (0x1<<25) //25:25 ++#define RG_SSUSB_XTAL_HYS (0x1<<24) //24:24 ++#define RG_SSUSB_XTAL_TOP_RESERVE (0xffff<<8) //23:8 ++#define RG_SSUSB_SYSPLL_RESERVE (0xf<<4) //7:4 ++#define RG_SSUSB_SYSPLL_FBSEL (0x3<<2) //3:2 ++#define RG_SSUSB_SYSPLL_PREDIV (0x3<<0) //1:0 ++ ++//U3D_reg2 ++#define RG_SSUSB_SYSPLL_LF (0x1<<31) //31:31 ++#define RG_SSUSB_SYSPLL_FBDIV (0x7f<<24) //30:24 ++#define RG_SSUSB_SYSPLL_POSDIV (0x3<<22) //23:22 ++#define RG_SSUSB_SYSPLL_VCO_DIV_SEL (0x1<<21) //21:21 ++#define RG_SSUSB_SYSPLL_BLP (0x1<<20) //20:20 ++#define RG_SSUSB_SYSPLL_BP (0x1<<19) //19:19 ++#define RG_SSUSB_SYSPLL_BR (0x1<<18) //18:18 ++#define RG_SSUSB_SYSPLL_BC (0x1<<17) //17:17 ++#define RG_SSUSB_SYSPLL_DIVEN (0x7<<14) //16:14 ++#define RG_SSUSB_SYSPLL_FPEN (0x1<<13) //13:13 ++#define RG_SSUSB_SYSPLL_MONCK_EN (0x1<<12) //12:12 ++#define RG_SSUSB_SYSPLL_MONVC_EN (0x1<<11) //11:11 ++#define RG_SSUSB_SYSPLL_MONREF_EN (0x1<<10) //10:10 ++#define RG_SSUSB_SYSPLL_VOD_EN (0x1<<9) //9:9 ++#define RG_SSUSB_SYSPLL_CK_SEL (0x1<<8) //8:8 ++ ++//U3D_reg3 ++#define RG_SSUSB_SYSPLL_TOP_RESERVE (0xffff<<16) //31:16 ++ ++//U3D_reg4 ++#define RG_SSUSB_SYSPLL_PCW_NCPO (0x7fffffff<<1) //31:1 ++ ++//U3D_reg5 ++#define RG_SSUSB_SYSPLL_DDS_PI_C (0x7<<29) //31:29 ++#define RG_SSUSB_SYSPLL_DDS_HF_EN (0x1<<28) //28:28 ++#define RG_SSUSB_SYSPLL_DDS_PREDIV2 (0x1<<27) //27:27 ++#define RG_SSUSB_SYSPLL_DDS_POSTDIV2 (0x1<<26) //26:26 ++#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN (0x1<<25) //25:25 ++#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL (0x1<<24) //24:24 ++#define RG_SSUSB_SYSPLL_DDS_MONEN (0x1<<23) //23:23 ++#define RG_SSUSB_SYSPLL_DDS_LPF_EN (0x1<<22) //22:22 ++#define RG_SSUSB_SYSPLL_CLK_PH_INV (0x1<<21) //21:21 ++#define RG_SSUSB_SYSPLL_DDS_SEL_EXT (0x1<<20) //20:20 ++#define RG_SSUSB_SYSPLL_DDS_DMY (0xffff<<0) //15:0 ++ ++//U3D_reg6 ++#define RG_SSUSB_TX250MCK_INVB (0x1<<31) //31:31 ++#define RG_SSUSB_IDRV_ITAILOP_EN (0x1<<30) //30:30 ++#define RG_SSUSB_IDRV_CALIB (0x3f<<24) //29:24 ++#define RG_SSUSB_TX_R50_FON (0x1<<23) //23:23 ++#define RG_SSUSB_TX_SR (0x7<<20) //22:20 ++#define RG_SSUSB_TX_EIDLE_CM (0xf<<16) //19:16 ++#define RG_SSUSB_RXDET_RSEL (0x3<<14) //15:14 ++#define RG_SSUSB_RXDET_VTHSEL (0x3<<12) //13:12 ++#define RG_SSUSB_CKMON_EN (0x1<<11) //11:11 ++#define RG_SSUSB_CKMON_SEL (0x7<<8) //10:8 ++#define RG_SSUSB_TX_VLMON_EN (0x1<<7) //7:7 ++#define RG_SSUSB_TX_VLMON_SEL (0x1<<6) //6:6 ++#define RG_SSUSB_RXLBTX_EN (0x1<<5) //5:5 ++#define RG_SSUSB_TXLBRX_EN (0x1<<4) //4:4 ++ ++//U3D_reg7 ++#define RG_SSUSB_RESERVE (0xfffff<<12) //31:12 ++#define RG_SSUSB_PLL_CKCTRL (0x3<<10) //11:10 ++#define RG_SSUSB_PLL_POSDIV (0x3<<8) //9:8 ++#define RG_SSUSB_PLL_AUTOK_LOAD (0x1<<7) //7:7 ++#define RG_SSUSB_PLL_LOAD_RSTB (0x1<<6) //6:6 ++#define RG_SSUSB_PLL_EP_EN (0x1<<5) //5:5 ++#define RG_SSUSB_PLL_VOD_EN (0x1<<4) //4:4 ++#define RG_SSUSB_PLL_V11_EN (0x1<<3) //3:3 ++#define RG_SSUSB_PLL_MONREF_EN (0x1<<2) //2:2 ++#define RG_SSUSB_PLL_MONCK_EN (0x1<<1) //1:1 ++#define RG_SSUSB_PLL_MONVC_EN (0x1<<0) //0:0 ++ ++//U3D_reg8 ++#define RG_SSUSB_PLL_RESERVE (0xffff<<0) //15:0 ++ ++//U3D_reg9 ++#define RG_SSUSB_PLL_DDS_DMY (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_PRD (0xffff<<0) //15:0 ++ ++//U3D_regA ++#define RG_SSUSB_PLL_SSC_PHASE_INI (0x1<<31) //31:31 ++#define RG_SSUSB_PLL_SSC_TRI_EN (0x1<<30) //30:30 ++#define RG_SSUSB_PLL_CLK_PH_INV (0x1<<29) //29:29 ++#define RG_SSUSB_PLL_DDS_LPF_EN (0x1<<28) //28:28 ++#define RG_SSUSB_PLL_DDS_VADJ (0x7<<21) //23:21 ++#define RG_SSUSB_PLL_DDS_MONEN (0x1<<20) //20:20 ++#define RG_SSUSB_PLL_DDS_PS_VADJ (0x7<<17) //19:17 ++#define RG_SSUSB_PLL_DDS_SEL_EXT (0x1<<16) //16:16 ++#define RG_SSUSB_CDR_PD_DIV_BYPASS (0x1<<15) //15:15 ++#define RG_SSUSB_CDR_PD_DIV_SEL (0x1<<14) //14:14 ++#define RG_SSUSB_CDR_CPBIAS_SEL (0x1<<13) //13:13 ++#define RG_SSUSB_CDR_OSCDET_EN (0x1<<12) //12:12 ++#define RG_SSUSB_CDR_MONMUX (0x1<<11) //11:11 ++#define RG_SSUSB_CDR_CKCTRL (0x3<<9) //10:9 ++#define RG_SSUSB_CDR_ACCEN (0x1<<8) //8:8 ++#define RG_SSUSB_CDR_BYPASS (0x3<<6) //7:6 ++#define RG_SSUSB_CDR_PI_SLEW (0x3<<4) //5:4 ++#define RG_SSUSB_CDR_EPEN (0x1<<3) //3:3 ++#define RG_SSUSB_CDR_AUTOK_LOAD (0x1<<2) //2:2 ++#define RG_SSUSB_CDR_LOAD_RSTB (0x1<<1) //1:1 ++#define RG_SSUSB_CDR_MONEN (0x1<<0) //0:0 ++ ++//U3D_regB ++#define RG_SSUSB_CDR_MONEN_DIG (0x1<<31) //31:31 ++#define RG_SSUSB_CDR_REGOD (0x3<<29) //30:29 ++#define RG_SSUSB_RX_DAC_EN (0x1<<26) //26:26 ++#define RG_SSUSB_RX_DAC_PWD (0x1<<25) //25:25 ++#define RG_SSUSB_EQ_CURSEL (0x1<<24) //24:24 ++#define RG_SSUSB_RX_DAC_MUX (0x1f<<19) //23:19 ++#define RG_SSUSB_RX_R2T_EN (0x1<<18) //18:18 ++#define RG_SSUSB_RX_T2R_EN (0x1<<17) //17:17 ++#define RG_SSUSB_RX_50_LOWER (0x7<<14) //16:14 ++#define RG_SSUSB_RX_50_TAR (0x3<<12) //13:12 ++#define RG_SSUSB_RX_SW_CTRL (0xf<<7) //10:7 ++#define RG_PCIE_SIGDET_VTH (0x3<<5) //6:5 ++#define RG_PCIE_SIGDET_LPF (0x3<<3) //4:3 ++#define RG_SSUSB_LFPS_MON_EN (0x1<<2) //2:2 ++ ++//U3D_regC ++#define RG_SSUSB_RXAFE_DCMON_SEL (0xf<<28) //31:28 ++#define RG_SSUSB_CDR_RESERVE (0xff<<16) //23:16 ++#define RG_SSUSB_RXAFE_RESERVE (0xff<<8) //15:8 ++#define RG_PCIE_RX_RESERVE (0xff<<0) //7:0 ++ ++//U3D_redD ++#define RGS_SSUSB_CDR_NO_OSC (0x1<<8) //8:8 ++#define RGS_SSUSB_RX_DEBUG_RESERVE (0xff<<0) //7:0 ++ ++//U3D_regE ++#define RG_SSUSB_INT_BIAS_SEL (0x1<<4) //4:4 ++#define RG_SSUSB_EXT_BIAS_SEL (0x1<<3) //3:3 ++#define RG_SSUSB_RX_P1_ENTRY_PASS (0x1<<2) //2:2 ++#define RG_SSUSB_RX_PD_RST (0x1<<1) //1:1 ++#define RG_SSUSB_RX_PD_RST_PASS (0x1<<0) //0:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_reg0 ++#define RG_SSUSB_BGR_EN_OFST (31) ++#define RG_SSUSB_CHPEN_OFST (30) ++#define RG_SSUSB_BG_DIV_OFST (28) ++#define RG_SSUSB_INTR_EN_OFST (26) ++#define RG_SSUSB_MPX_OUT_SEL_OFST (24) ++#define RG_SSUSB_MPX_SEL_OFST (16) ++#define RG_SSUSB_REF_EN_OFST (15) ++#define RG_SSUSB_VRT_VREF_SEL_OFST (11) ++#define RG_SSUSB_BG_RASEL_OFST (9) ++#define RG_SSUSB_BG_RBSEL_OFST (7) ++#define RG_SSUSB_BG_MONEN_OFST (6) ++#define RG_PCIE_CLKDRV_OFFSET_OFST (0) ++ ++//U3D_reg1 ++#define RG_PCIE_CLKDRV_SLEW_OFST (30) ++#define RG_PCIE_CLKDRV_AMP_OFST (27) ++#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST (26) ++#define RG_SSUSB_XTAL_MON_EN_OFST (25) ++#define RG_SSUSB_XTAL_HYS_OFST (24) ++#define RG_SSUSB_XTAL_TOP_RESERVE_OFST (8) ++#define RG_SSUSB_SYSPLL_RESERVE_OFST (4) ++#define RG_SSUSB_SYSPLL_FBSEL_OFST (2) ++#define RG_SSUSB_SYSPLL_PREDIV_OFST (0) ++ ++//U3D_reg2 ++#define RG_SSUSB_SYSPLL_LF_OFST (31) ++#define RG_SSUSB_SYSPLL_FBDIV_OFST (24) ++#define RG_SSUSB_SYSPLL_POSDIV_OFST (22) ++#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST (21) ++#define RG_SSUSB_SYSPLL_BLP_OFST (20) ++#define RG_SSUSB_SYSPLL_BP_OFST (19) ++#define RG_SSUSB_SYSPLL_BR_OFST (18) ++#define RG_SSUSB_SYSPLL_BC_OFST (17) ++#define RG_SSUSB_SYSPLL_DIVEN_OFST (14) ++#define RG_SSUSB_SYSPLL_FPEN_OFST (13) ++#define RG_SSUSB_SYSPLL_MONCK_EN_OFST (12) ++#define RG_SSUSB_SYSPLL_MONVC_EN_OFST (11) ++#define RG_SSUSB_SYSPLL_MONREF_EN_OFST (10) ++#define RG_SSUSB_SYSPLL_VOD_EN_OFST (9) ++#define RG_SSUSB_SYSPLL_CK_SEL_OFST (8) ++ ++//U3D_reg3 ++#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST (16) ++ ++//U3D_reg4 ++#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST (1) ++ ++//U3D_reg5 ++#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST (29) ++#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST (28) ++#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST (27) ++#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST (26) ++#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST (25) ++#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST (24) ++#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST (23) ++#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST (22) ++#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST (21) ++#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST (20) ++#define RG_SSUSB_SYSPLL_DDS_DMY_OFST (0) ++ ++//U3D_reg6 ++#define RG_SSUSB_TX250MCK_INVB_OFST (31) ++#define RG_SSUSB_IDRV_ITAILOP_EN_OFST (30) ++#define RG_SSUSB_IDRV_CALIB_OFST (24) ++#define RG_SSUSB_TX_R50_FON_OFST (23) ++#define RG_SSUSB_TX_SR_OFST (20) ++#define RG_SSUSB_TX_EIDLE_CM_OFST (16) ++#define RG_SSUSB_RXDET_RSEL_OFST (14) ++#define RG_SSUSB_RXDET_VTHSEL_OFST (12) ++#define RG_SSUSB_CKMON_EN_OFST (11) ++#define RG_SSUSB_CKMON_SEL_OFST (8) ++#define RG_SSUSB_TX_VLMON_EN_OFST (7) ++#define RG_SSUSB_TX_VLMON_SEL_OFST (6) ++#define RG_SSUSB_RXLBTX_EN_OFST (5) ++#define RG_SSUSB_TXLBRX_EN_OFST (4) ++ ++//U3D_reg7 ++#define RG_SSUSB_RESERVE_OFST (12) ++#define RG_SSUSB_PLL_CKCTRL_OFST (10) ++#define RG_SSUSB_PLL_POSDIV_OFST (8) ++#define RG_SSUSB_PLL_AUTOK_LOAD_OFST (7) ++#define RG_SSUSB_PLL_LOAD_RSTB_OFST (6) ++#define RG_SSUSB_PLL_EP_EN_OFST (5) ++#define RG_SSUSB_PLL_VOD_EN_OFST (4) ++#define RG_SSUSB_PLL_V11_EN_OFST (3) ++#define RG_SSUSB_PLL_MONREF_EN_OFST (2) ++#define RG_SSUSB_PLL_MONCK_EN_OFST (1) ++#define RG_SSUSB_PLL_MONVC_EN_OFST (0) ++ ++//U3D_reg8 ++#define RG_SSUSB_PLL_RESERVE_OFST (0) ++ ++//U3D_reg9 ++#define RG_SSUSB_PLL_DDS_DMY_OFST (16) ++#define RG_SSUSB_PLL_SSC_PRD_OFST (0) ++ ++//U3D_regA ++#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST (31) ++#define RG_SSUSB_PLL_SSC_TRI_EN_OFST (30) ++#define RG_SSUSB_PLL_CLK_PH_INV_OFST (29) ++#define RG_SSUSB_PLL_DDS_LPF_EN_OFST (28) ++#define RG_SSUSB_PLL_DDS_VADJ_OFST (21) ++#define RG_SSUSB_PLL_DDS_MONEN_OFST (20) ++#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST (17) ++#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST (16) ++#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST (15) ++#define RG_SSUSB_CDR_PD_DIV_SEL_OFST (14) ++#define RG_SSUSB_CDR_CPBIAS_SEL_OFST (13) ++#define RG_SSUSB_CDR_OSCDET_EN_OFST (12) ++#define RG_SSUSB_CDR_MONMUX_OFST (11) ++#define RG_SSUSB_CDR_CKCTRL_OFST (9) ++#define RG_SSUSB_CDR_ACCEN_OFST (8) ++#define RG_SSUSB_CDR_BYPASS_OFST (6) ++#define RG_SSUSB_CDR_PI_SLEW_OFST (4) ++#define RG_SSUSB_CDR_EPEN_OFST (3) ++#define RG_SSUSB_CDR_AUTOK_LOAD_OFST (2) ++#define RG_SSUSB_CDR_LOAD_RSTB_OFST (1) ++#define RG_SSUSB_CDR_MONEN_OFST (0) ++ ++//U3D_regB ++#define RG_SSUSB_CDR_MONEN_DIG_OFST (31) ++#define RG_SSUSB_CDR_REGOD_OFST (29) ++#define RG_SSUSB_RX_DAC_EN_OFST (26) ++#define RG_SSUSB_RX_DAC_PWD_OFST (25) ++#define RG_SSUSB_EQ_CURSEL_OFST (24) ++#define RG_SSUSB_RX_DAC_MUX_OFST (19) ++#define RG_SSUSB_RX_R2T_EN_OFST (18) ++#define RG_SSUSB_RX_T2R_EN_OFST (17) ++#define RG_SSUSB_RX_50_LOWER_OFST (14) ++#define RG_SSUSB_RX_50_TAR_OFST (12) ++#define RG_SSUSB_RX_SW_CTRL_OFST (7) ++#define RG_PCIE_SIGDET_VTH_OFST (5) ++#define RG_PCIE_SIGDET_LPF_OFST (3) ++#define RG_SSUSB_LFPS_MON_EN_OFST (2) ++ ++//U3D_regC ++#define RG_SSUSB_RXAFE_DCMON_SEL_OFST (28) ++#define RG_SSUSB_CDR_RESERVE_OFST (16) ++#define RG_SSUSB_RXAFE_RESERVE_OFST (8) ++#define RG_PCIE_RX_RESERVE_OFST (0) ++ ++//U3D_redD ++#define RGS_SSUSB_CDR_NO_OSC_OFST (8) ++#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST (0) ++ ++//U3D_regE ++#define RG_SSUSB_INT_BIAS_SEL_OFST (4) ++#define RG_SSUSB_EXT_BIAS_SEL_OFST (3) ++#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST (2) ++#define RG_SSUSB_RX_PD_RST_OFST (1) ++#define RG_SSUSB_RX_PD_RST_PASS_OFST (0) ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u3phya_da_reg { ++ //0x0 ++ PHY_LE32 reg0; ++ PHY_LE32 reg1; ++ PHY_LE32 reg4; ++ PHY_LE32 reg5; ++ //0x10 ++ PHY_LE32 reg6; ++ PHY_LE32 reg7; ++ PHY_LE32 reg8; ++ PHY_LE32 reg9; ++ //0x20 ++ PHY_LE32 reg10; ++ PHY_LE32 reg12; ++ PHY_LE32 reg13; ++ PHY_LE32 reg14; ++ //0x30 ++ PHY_LE32 reg15; ++ PHY_LE32 reg16; ++ PHY_LE32 reg19; ++ PHY_LE32 reg20; ++ //0x40 ++ PHY_LE32 reg21; ++ PHY_LE32 reg23; ++ PHY_LE32 reg25; ++ PHY_LE32 reg26; ++ //0x50 ++ PHY_LE32 reg28; ++ PHY_LE32 reg29; ++ PHY_LE32 reg30; ++ PHY_LE32 reg31; ++ //0x60 ++ PHY_LE32 reg32; ++ PHY_LE32 reg33; ++}; ++ ++//U3D_reg0 ++#define RG_PCIE_SPEED_PE2D (0x1<<24) //24:24 ++#define RG_PCIE_SPEED_PE2H (0x1<<23) //23:23 ++#define RG_PCIE_SPEED_PE1D (0x1<<22) //22:22 ++#define RG_PCIE_SPEED_PE1H (0x1<<21) //21:21 ++#define RG_PCIE_SPEED_U3 (0x1<<20) //20:20 ++#define RG_SSUSB_XTAL_EXT_EN_PE2D (0x3<<18) //19:18 ++#define RG_SSUSB_XTAL_EXT_EN_PE2H (0x3<<16) //17:16 ++#define RG_SSUSB_XTAL_EXT_EN_PE1D (0x3<<14) //15:14 ++#define RG_SSUSB_XTAL_EXT_EN_PE1H (0x3<<12) //13:12 ++#define RG_SSUSB_XTAL_EXT_EN_U3 (0x3<<10) //11:10 ++#define RG_SSUSB_CDR_REFCK_SEL_PE2D (0x3<<8) //9:8 ++#define RG_SSUSB_CDR_REFCK_SEL_PE2H (0x3<<6) //7:6 ++#define RG_SSUSB_CDR_REFCK_SEL_PE1D (0x3<<4) //5:4 ++#define RG_SSUSB_CDR_REFCK_SEL_PE1H (0x3<<2) //3:2 ++#define RG_SSUSB_CDR_REFCK_SEL_U3 (0x3<<0) //1:0 ++ ++//U3D_reg1 ++#define RG_USB20_REFCK_SEL_PE2D (0x1<<30) //30:30 ++#define RG_USB20_REFCK_SEL_PE2H (0x1<<29) //29:29 ++#define RG_USB20_REFCK_SEL_PE1D (0x1<<28) //28:28 ++#define RG_USB20_REFCK_SEL_PE1H (0x1<<27) //27:27 ++#define RG_USB20_REFCK_SEL_U3 (0x1<<26) //26:26 ++#define RG_PCIE_REFCK_DIV4_PE2D (0x1<<25) //25:25 ++#define RG_PCIE_REFCK_DIV4_PE2H (0x1<<24) //24:24 ++#define RG_PCIE_REFCK_DIV4_PE1D (0x1<<18) //18:18 ++#define RG_PCIE_REFCK_DIV4_PE1H (0x1<<17) //17:17 ++#define RG_PCIE_REFCK_DIV4_U3 (0x1<<16) //16:16 ++#define RG_PCIE_MODE_PE2D (0x1<<8) //8:8 ++#define RG_PCIE_MODE_PE2H (0x1<<3) //3:3 ++#define RG_PCIE_MODE_PE1D (0x1<<2) //2:2 ++#define RG_PCIE_MODE_PE1H (0x1<<1) //1:1 ++#define RG_PCIE_MODE_U3 (0x1<<0) //0:0 ++ ++//U3D_reg4 ++#define RG_SSUSB_PLL_DIVEN_PE2D (0x7<<22) //24:22 ++#define RG_SSUSB_PLL_DIVEN_PE2H (0x7<<19) //21:19 ++#define RG_SSUSB_PLL_DIVEN_PE1D (0x7<<16) //18:16 ++#define RG_SSUSB_PLL_DIVEN_PE1H (0x7<<13) //15:13 ++#define RG_SSUSB_PLL_DIVEN_U3 (0x7<<10) //12:10 ++#define RG_SSUSB_PLL_BC_PE2D (0x3<<8) //9:8 ++#define RG_SSUSB_PLL_BC_PE2H (0x3<<6) //7:6 ++#define RG_SSUSB_PLL_BC_PE1D (0x3<<4) //5:4 ++#define RG_SSUSB_PLL_BC_PE1H (0x3<<2) //3:2 ++#define RG_SSUSB_PLL_BC_U3 (0x3<<0) //1:0 ++ ++//U3D_reg5 ++#define RG_SSUSB_PLL_BR_PE2D (0x7<<27) //29:27 ++#define RG_SSUSB_PLL_BR_PE2H (0x7<<24) //26:24 ++#define RG_SSUSB_PLL_BR_PE1D (0x7<<21) //23:21 ++#define RG_SSUSB_PLL_BR_PE1H (0x7<<18) //20:18 ++#define RG_SSUSB_PLL_BR_U3 (0x7<<15) //17:15 ++#define RG_SSUSB_PLL_IC_PE2D (0x7<<12) //14:12 ++#define RG_SSUSB_PLL_IC_PE2H (0x7<<9) //11:9 ++#define RG_SSUSB_PLL_IC_PE1D (0x7<<6) //8:6 ++#define RG_SSUSB_PLL_IC_PE1H (0x7<<3) //5:3 ++#define RG_SSUSB_PLL_IC_U3 (0x7<<0) //2:0 ++ ++//U3D_reg6 ++#define RG_SSUSB_PLL_IR_PE2D (0xf<<24) //27:24 ++#define RG_SSUSB_PLL_IR_PE2H (0xf<<16) //19:16 ++#define RG_SSUSB_PLL_IR_PE1D (0xf<<8) //11:8 ++#define RG_SSUSB_PLL_IR_PE1H (0xf<<4) //7:4 ++#define RG_SSUSB_PLL_IR_U3 (0xf<<0) //3:0 ++ ++//U3D_reg7 ++#define RG_SSUSB_PLL_BP_PE2D (0xf<<24) //27:24 ++#define RG_SSUSB_PLL_BP_PE2H (0xf<<16) //19:16 ++#define RG_SSUSB_PLL_BP_PE1D (0xf<<8) //11:8 ++#define RG_SSUSB_PLL_BP_PE1H (0xf<<4) //7:4 ++#define RG_SSUSB_PLL_BP_U3 (0xf<<0) //3:0 ++ ++//U3D_reg8 ++#define RG_SSUSB_PLL_FBKSEL_PE2D (0x3<<24) //25:24 ++#define RG_SSUSB_PLL_FBKSEL_PE2H (0x3<<16) //17:16 ++#define RG_SSUSB_PLL_FBKSEL_PE1D (0x3<<8) //9:8 ++#define RG_SSUSB_PLL_FBKSEL_PE1H (0x3<<2) //3:2 ++#define RG_SSUSB_PLL_FBKSEL_U3 (0x3<<0) //1:0 ++ ++//U3D_reg9 ++#define RG_SSUSB_PLL_FBKDIV_PE2H (0x7f<<24) //30:24 ++#define RG_SSUSB_PLL_FBKDIV_PE1D (0x7f<<16) //22:16 ++#define RG_SSUSB_PLL_FBKDIV_PE1H (0x7f<<8) //14:8 ++#define RG_SSUSB_PLL_FBKDIV_U3 (0x7f<<0) //6:0 ++ ++//U3D_reg10 ++#define RG_SSUSB_PLL_PREDIV_PE2D (0x3<<26) //27:26 ++#define RG_SSUSB_PLL_PREDIV_PE2H (0x3<<24) //25:24 ++#define RG_SSUSB_PLL_PREDIV_PE1D (0x3<<18) //19:18 ++#define RG_SSUSB_PLL_PREDIV_PE1H (0x3<<16) //17:16 ++#define RG_SSUSB_PLL_PREDIV_U3 (0x3<<8) //9:8 ++#define RG_SSUSB_PLL_FBKDIV_PE2D (0x7f<<0) //6:0 ++ ++//U3D_reg12 ++#define RG_SSUSB_PLL_PCW_NCPO_U3 (0x7fffffff<<0) //30:0 ++ ++//U3D_reg13 ++#define RG_SSUSB_PLL_PCW_NCPO_PE1H (0x7fffffff<<0) //30:0 ++ ++//U3D_reg14 ++#define RG_SSUSB_PLL_PCW_NCPO_PE1D (0x7fffffff<<0) //30:0 ++ ++//U3D_reg15 ++#define RG_SSUSB_PLL_PCW_NCPO_PE2H (0x7fffffff<<0) //30:0 ++ ++//U3D_reg16 ++#define RG_SSUSB_PLL_PCW_NCPO_PE2D (0x7fffffff<<0) //30:0 ++ ++//U3D_reg19 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE1H (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA1_U3 (0xffff<<0) //15:0 ++ ++//U3D_reg20 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE2H (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE1D (0xffff<<0) //15:0 ++ ++//U3D_reg21 ++#define RG_SSUSB_PLL_SSC_DELTA_U3 (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE2D (0xffff<<0) //15:0 ++ ++//U3D_reg23 ++#define RG_SSUSB_PLL_SSC_DELTA_PE1D (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA_PE1H (0xffff<<0) //15:0 ++ ++//U3D_reg25 ++#define RG_SSUSB_PLL_SSC_DELTA_PE2D (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA_PE2H (0xffff<<0) //15:0 ++ ++//U3D_reg26 ++#define RG_SSUSB_PLL_REFCKDIV_PE2D (0x1<<25) //25:25 ++#define RG_SSUSB_PLL_REFCKDIV_PE2H (0x1<<24) //24:24 ++#define RG_SSUSB_PLL_REFCKDIV_PE1D (0x1<<16) //16:16 ++#define RG_SSUSB_PLL_REFCKDIV_PE1H (0x1<<8) //8:8 ++#define RG_SSUSB_PLL_REFCKDIV_U3 (0x1<<0) //0:0 ++ ++//U3D_reg28 ++#define RG_SSUSB_CDR_BPA_PE2D (0x3<<24) //25:24 ++#define RG_SSUSB_CDR_BPA_PE2H (0x3<<16) //17:16 ++#define RG_SSUSB_CDR_BPA_PE1D (0x3<<10) //11:10 ++#define RG_SSUSB_CDR_BPA_PE1H (0x3<<8) //9:8 ++#define RG_SSUSB_CDR_BPA_U3 (0x3<<0) //1:0 ++ ++//U3D_reg29 ++#define RG_SSUSB_CDR_BPB_PE2D (0x7<<24) //26:24 ++#define RG_SSUSB_CDR_BPB_PE2H (0x7<<16) //18:16 ++#define RG_SSUSB_CDR_BPB_PE1D (0x7<<6) //8:6 ++#define RG_SSUSB_CDR_BPB_PE1H (0x7<<3) //5:3 ++#define RG_SSUSB_CDR_BPB_U3 (0x7<<0) //2:0 ++ ++//U3D_reg30 ++#define RG_SSUSB_CDR_BR_PE2D (0x7<<24) //26:24 ++#define RG_SSUSB_CDR_BR_PE2H (0x7<<16) //18:16 ++#define RG_SSUSB_CDR_BR_PE1D (0x7<<6) //8:6 ++#define RG_SSUSB_CDR_BR_PE1H (0x7<<3) //5:3 ++#define RG_SSUSB_CDR_BR_U3 (0x7<<0) //2:0 ++ ++//U3D_reg31 ++#define RG_SSUSB_CDR_FBDIV_PE2H (0x7f<<24) //30:24 ++#define RG_SSUSB_CDR_FBDIV_PE1D (0x7f<<16) //22:16 ++#define RG_SSUSB_CDR_FBDIV_PE1H (0x7f<<8) //14:8 ++#define RG_SSUSB_CDR_FBDIV_U3 (0x7f<<0) //6:0 ++ ++//U3D_reg32 ++#define RG_SSUSB_EQ_RSTEP1_PE2D (0x3<<30) //31:30 ++#define RG_SSUSB_EQ_RSTEP1_PE2H (0x3<<28) //29:28 ++#define RG_SSUSB_EQ_RSTEP1_PE1D (0x3<<26) //27:26 ++#define RG_SSUSB_EQ_RSTEP1_PE1H (0x3<<24) //25:24 ++#define RG_SSUSB_EQ_RSTEP1_U3 (0x3<<22) //23:22 ++#define RG_SSUSB_LFPS_DEGLITCH_PE2D (0x3<<20) //21:20 ++#define RG_SSUSB_LFPS_DEGLITCH_PE2H (0x3<<18) //19:18 ++#define RG_SSUSB_LFPS_DEGLITCH_PE1D (0x3<<16) //17:16 ++#define RG_SSUSB_LFPS_DEGLITCH_PE1H (0x3<<14) //15:14 ++#define RG_SSUSB_LFPS_DEGLITCH_U3 (0x3<<12) //13:12 ++#define RG_SSUSB_CDR_KVSEL_PE2D (0x1<<11) //11:11 ++#define RG_SSUSB_CDR_KVSEL_PE2H (0x1<<10) //10:10 ++#define RG_SSUSB_CDR_KVSEL_PE1D (0x1<<9) //9:9 ++#define RG_SSUSB_CDR_KVSEL_PE1H (0x1<<8) //8:8 ++#define RG_SSUSB_CDR_KVSEL_U3 (0x1<<7) //7:7 ++#define RG_SSUSB_CDR_FBDIV_PE2D (0x7f<<0) //6:0 ++ ++//U3D_reg33 ++#define RG_SSUSB_RX_CMPWD_PE2D (0x1<<26) //26:26 ++#define RG_SSUSB_RX_CMPWD_PE2H (0x1<<25) //25:25 ++#define RG_SSUSB_RX_CMPWD_PE1D (0x1<<24) //24:24 ++#define RG_SSUSB_RX_CMPWD_PE1H (0x1<<23) //23:23 ++#define RG_SSUSB_RX_CMPWD_U3 (0x1<<16) //16:16 ++#define RG_SSUSB_EQ_RSTEP2_PE2D (0x3<<8) //9:8 ++#define RG_SSUSB_EQ_RSTEP2_PE2H (0x3<<6) //7:6 ++#define RG_SSUSB_EQ_RSTEP2_PE1D (0x3<<4) //5:4 ++#define RG_SSUSB_EQ_RSTEP2_PE1H (0x3<<2) //3:2 ++#define RG_SSUSB_EQ_RSTEP2_U3 (0x3<<0) //1:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_reg0 ++#define RG_PCIE_SPEED_PE2D_OFST (24) ++#define RG_PCIE_SPEED_PE2H_OFST (23) ++#define RG_PCIE_SPEED_PE1D_OFST (22) ++#define RG_PCIE_SPEED_PE1H_OFST (21) ++#define RG_PCIE_SPEED_U3_OFST (20) ++#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST (18) ++#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST (16) ++#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST (14) ++#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST (12) ++#define RG_SSUSB_XTAL_EXT_EN_U3_OFST (10) ++#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST (8) ++#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST (6) ++#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST (4) ++#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST (2) ++#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST (0) ++ ++//U3D_reg1 ++#define RG_USB20_REFCK_SEL_PE2D_OFST (30) ++#define RG_USB20_REFCK_SEL_PE2H_OFST (29) ++#define RG_USB20_REFCK_SEL_PE1D_OFST (28) ++#define RG_USB20_REFCK_SEL_PE1H_OFST (27) ++#define RG_USB20_REFCK_SEL_U3_OFST (26) ++#define RG_PCIE_REFCK_DIV4_PE2D_OFST (25) ++#define RG_PCIE_REFCK_DIV4_PE2H_OFST (24) ++#define RG_PCIE_REFCK_DIV4_PE1D_OFST (18) ++#define RG_PCIE_REFCK_DIV4_PE1H_OFST (17) ++#define RG_PCIE_REFCK_DIV4_U3_OFST (16) ++#define RG_PCIE_MODE_PE2D_OFST (8) ++#define RG_PCIE_MODE_PE2H_OFST (3) ++#define RG_PCIE_MODE_PE1D_OFST (2) ++#define RG_PCIE_MODE_PE1H_OFST (1) ++#define RG_PCIE_MODE_U3_OFST (0) ++ ++//U3D_reg4 ++#define RG_SSUSB_PLL_DIVEN_PE2D_OFST (22) ++#define RG_SSUSB_PLL_DIVEN_PE2H_OFST (19) ++#define RG_SSUSB_PLL_DIVEN_PE1D_OFST (16) ++#define RG_SSUSB_PLL_DIVEN_PE1H_OFST (13) ++#define RG_SSUSB_PLL_DIVEN_U3_OFST (10) ++#define RG_SSUSB_PLL_BC_PE2D_OFST (8) ++#define RG_SSUSB_PLL_BC_PE2H_OFST (6) ++#define RG_SSUSB_PLL_BC_PE1D_OFST (4) ++#define RG_SSUSB_PLL_BC_PE1H_OFST (2) ++#define RG_SSUSB_PLL_BC_U3_OFST (0) ++ ++//U3D_reg5 ++#define RG_SSUSB_PLL_BR_PE2D_OFST (27) ++#define RG_SSUSB_PLL_BR_PE2H_OFST (24) ++#define RG_SSUSB_PLL_BR_PE1D_OFST (21) ++#define RG_SSUSB_PLL_BR_PE1H_OFST (18) ++#define RG_SSUSB_PLL_BR_U3_OFST (15) ++#define RG_SSUSB_PLL_IC_PE2D_OFST (12) ++#define RG_SSUSB_PLL_IC_PE2H_OFST (9) ++#define RG_SSUSB_PLL_IC_PE1D_OFST (6) ++#define RG_SSUSB_PLL_IC_PE1H_OFST (3) ++#define RG_SSUSB_PLL_IC_U3_OFST (0) ++ ++//U3D_reg6 ++#define RG_SSUSB_PLL_IR_PE2D_OFST (24) ++#define RG_SSUSB_PLL_IR_PE2H_OFST (16) ++#define RG_SSUSB_PLL_IR_PE1D_OFST (8) ++#define RG_SSUSB_PLL_IR_PE1H_OFST (4) ++#define RG_SSUSB_PLL_IR_U3_OFST (0) ++ ++//U3D_reg7 ++#define RG_SSUSB_PLL_BP_PE2D_OFST (24) ++#define RG_SSUSB_PLL_BP_PE2H_OFST (16) ++#define RG_SSUSB_PLL_BP_PE1D_OFST (8) ++#define RG_SSUSB_PLL_BP_PE1H_OFST (4) ++#define RG_SSUSB_PLL_BP_U3_OFST (0) ++ ++//U3D_reg8 ++#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST (24) ++#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST (16) ++#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST (8) ++#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST (2) ++#define RG_SSUSB_PLL_FBKSEL_U3_OFST (0) ++ ++//U3D_reg9 ++#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST (24) ++#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST (16) ++#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST (8) ++#define RG_SSUSB_PLL_FBKDIV_U3_OFST (0) ++ ++//U3D_reg10 ++#define RG_SSUSB_PLL_PREDIV_PE2D_OFST (26) ++#define RG_SSUSB_PLL_PREDIV_PE2H_OFST (24) ++#define RG_SSUSB_PLL_PREDIV_PE1D_OFST (18) ++#define RG_SSUSB_PLL_PREDIV_PE1H_OFST (16) ++#define RG_SSUSB_PLL_PREDIV_U3_OFST (8) ++#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST (0) ++ ++//U3D_reg12 ++#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST (0) ++ ++//U3D_reg13 ++#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST (0) ++ ++//U3D_reg14 ++#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST (0) ++ ++//U3D_reg15 ++#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST (0) ++ ++//U3D_reg16 ++#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST (0) ++ ++//U3D_reg19 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST (0) ++ ++//U3D_reg20 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST (0) ++ ++//U3D_reg21 ++#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST (0) ++ ++//U3D_reg23 ++#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST (0) ++ ++//U3D_reg25 ++#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST (0) ++ ++//U3D_reg26 ++#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST (25) ++#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST (24) ++#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST (16) ++#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST (8) ++#define RG_SSUSB_PLL_REFCKDIV_U3_OFST (0) ++ ++//U3D_reg28 ++#define RG_SSUSB_CDR_BPA_PE2D_OFST (24) ++#define RG_SSUSB_CDR_BPA_PE2H_OFST (16) ++#define RG_SSUSB_CDR_BPA_PE1D_OFST (10) ++#define RG_SSUSB_CDR_BPA_PE1H_OFST (8) ++#define RG_SSUSB_CDR_BPA_U3_OFST (0) ++ ++//U3D_reg29 ++#define RG_SSUSB_CDR_BPB_PE2D_OFST (24) ++#define RG_SSUSB_CDR_BPB_PE2H_OFST (16) ++#define RG_SSUSB_CDR_BPB_PE1D_OFST (6) ++#define RG_SSUSB_CDR_BPB_PE1H_OFST (3) ++#define RG_SSUSB_CDR_BPB_U3_OFST (0) ++ ++//U3D_reg30 ++#define RG_SSUSB_CDR_BR_PE2D_OFST (24) ++#define RG_SSUSB_CDR_BR_PE2H_OFST (16) ++#define RG_SSUSB_CDR_BR_PE1D_OFST (6) ++#define RG_SSUSB_CDR_BR_PE1H_OFST (3) ++#define RG_SSUSB_CDR_BR_U3_OFST (0) ++ ++//U3D_reg31 ++#define RG_SSUSB_CDR_FBDIV_PE2H_OFST (24) ++#define RG_SSUSB_CDR_FBDIV_PE1D_OFST (16) ++#define RG_SSUSB_CDR_FBDIV_PE1H_OFST (8) ++#define RG_SSUSB_CDR_FBDIV_U3_OFST (0) ++ ++//U3D_reg32 ++#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST (30) ++#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST (28) ++#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST (26) ++#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST (24) ++#define RG_SSUSB_EQ_RSTEP1_U3_OFST (22) ++#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST (20) ++#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST (18) ++#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST (16) ++#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST (14) ++#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST (12) ++#define RG_SSUSB_CDR_KVSEL_PE2D_OFST (11) ++#define RG_SSUSB_CDR_KVSEL_PE2H_OFST (10) ++#define RG_SSUSB_CDR_KVSEL_PE1D_OFST (9) ++#define RG_SSUSB_CDR_KVSEL_PE1H_OFST (8) ++#define RG_SSUSB_CDR_KVSEL_U3_OFST (7) ++#define RG_SSUSB_CDR_FBDIV_PE2D_OFST (0) ++ ++//U3D_reg33 ++#define RG_SSUSB_RX_CMPWD_PE2D_OFST (26) ++#define RG_SSUSB_RX_CMPWD_PE2H_OFST (25) ++#define RG_SSUSB_RX_CMPWD_PE1D_OFST (24) ++#define RG_SSUSB_RX_CMPWD_PE1H_OFST (23) ++#define RG_SSUSB_RX_CMPWD_U3_OFST (16) ++#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST (8) ++#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST (6) ++#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST (4) ++#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST (2) ++#define RG_SSUSB_EQ_RSTEP2_U3_OFST (0) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u3phyd_reg { ++ //0x0 ++ PHY_LE32 phyd_mix0; ++ PHY_LE32 phyd_mix1; ++ PHY_LE32 phyd_lfps0; ++ PHY_LE32 phyd_lfps1; ++ //0x10 ++ PHY_LE32 phyd_impcal0; ++ PHY_LE32 phyd_impcal1; ++ PHY_LE32 phyd_txpll0; ++ PHY_LE32 phyd_txpll1; ++ //0x20 ++ PHY_LE32 phyd_txpll2; ++ PHY_LE32 phyd_fl0; ++ PHY_LE32 phyd_mix2; ++ PHY_LE32 phyd_rx0; ++ //0x30 ++ PHY_LE32 phyd_t2rlb; ++ PHY_LE32 phyd_cppat; ++ PHY_LE32 phyd_mix3; ++ PHY_LE32 phyd_ebufctl; ++ //0x40 ++ PHY_LE32 phyd_pipe0; ++ PHY_LE32 phyd_pipe1; ++ PHY_LE32 phyd_mix4; ++ PHY_LE32 phyd_ckgen0; ++ //0x50 ++ PHY_LE32 phyd_mix5; ++ PHY_LE32 phyd_reserved; ++ PHY_LE32 phyd_cdr0; ++ PHY_LE32 phyd_cdr1; ++ //0x60 ++ PHY_LE32 phyd_pll_0; ++ PHY_LE32 phyd_pll_1; ++ PHY_LE32 phyd_bcn_det_1; ++ PHY_LE32 phyd_bcn_det_2; ++ //0x70 ++ PHY_LE32 eq0; ++ PHY_LE32 eq1; ++ PHY_LE32 eq2; ++ PHY_LE32 eq3; ++ //0x80 ++ PHY_LE32 eq_eye0; ++ PHY_LE32 eq_eye1; ++ PHY_LE32 eq_eye2; ++ PHY_LE32 eq_dfe0; ++ //0x90 ++ PHY_LE32 eq_dfe1; ++ PHY_LE32 eq_dfe2; ++ PHY_LE32 eq_dfe3; ++ PHY_LE32 reserve0; ++ //0xa0 ++ PHY_LE32 phyd_mon0; ++ PHY_LE32 phyd_mon1; ++ PHY_LE32 phyd_mon2; ++ PHY_LE32 phyd_mon3; ++ //0xb0 ++ PHY_LE32 phyd_mon4; ++ PHY_LE32 phyd_mon5; ++ PHY_LE32 phyd_mon6; ++ PHY_LE32 phyd_mon7; ++ //0xc0 ++ PHY_LE32 phya_rx_mon0; ++ PHY_LE32 phya_rx_mon1; ++ PHY_LE32 phya_rx_mon2; ++ PHY_LE32 phya_rx_mon3; ++ //0xd0 ++ PHY_LE32 phya_rx_mon4; ++ PHY_LE32 phya_rx_mon5; ++ PHY_LE32 phyd_cppat2; ++ PHY_LE32 eq_eye3; ++ //0xe0 ++ PHY_LE32 kband_out; ++ PHY_LE32 kband_out1; ++}; ++ ++//U3D_PHYD_MIX0 ++#define RG_SSUSB_P_P3_TX_NG (0x1<<31) //31:31 ++#define RG_SSUSB_TSEQ_EN (0x1<<30) //30:30 ++#define RG_SSUSB_TSEQ_POLEN (0x1<<29) //29:29 ++#define RG_SSUSB_TSEQ_POL (0x1<<28) //28:28 ++#define RG_SSUSB_P_P3_PCLK_NG (0x1<<27) //27:27 ++#define RG_SSUSB_TSEQ_TH (0x7<<24) //26:24 ++#define RG_SSUSB_PRBS_BERTH (0xff<<16) //23:16 ++#define RG_SSUSB_DISABLE_PHY_U2_ON (0x1<<15) //15:15 ++#define RG_SSUSB_DISABLE_PHY_U2_OFF (0x1<<14) //14:14 ++#define RG_SSUSB_PRBS_EN (0x1<<13) //13:13 ++#define RG_SSUSB_BPSLOCK (0x1<<12) //12:12 ++#define RG_SSUSB_RTCOMCNT (0xf<<8) //11:8 ++#define RG_SSUSB_COMCNT (0xf<<4) //7:4 ++#define RG_SSUSB_PRBSEL_CALIB (0xf<<0) //3:0 ++ ++//U3D_PHYD_MIX1 ++#define RG_SSUSB_SLEEP_EN (0x1<<31) //31:31 ++#define RG_SSUSB_PRBSEL_PCS (0x7<<28) //30:28 ++#define RG_SSUSB_TXLFPS_PRD (0xf<<24) //27:24 ++#define RG_SSUSB_P_RX_P0S_CK (0x1<<23) //23:23 ++#define RG_SSUSB_P_TX_P0S_CK (0x1<<22) //22:22 ++#define RG_SSUSB_PDNCTL (0x3f<<16) //21:16 ++#define RG_SSUSB_TX_DRV_EN (0x1<<15) //15:15 ++#define RG_SSUSB_TX_DRV_SEL (0x1<<14) //14:14 ++#define RG_SSUSB_TX_DRV_DLY (0x3f<<8) //13:8 ++#define RG_SSUSB_BERT_EN (0x1<<7) //7:7 ++#define RG_SSUSB_SCP_TH (0x7<<4) //6:4 ++#define RG_SSUSB_SCP_EN (0x1<<3) //3:3 ++#define RG_SSUSB_RXANSIDEC_TEST (0x7<<0) //2:0 ++ ++//U3D_PHYD_LFPS0 ++#define RG_SSUSB_LFPS_PWD (0x1<<30) //30:30 ++#define RG_SSUSB_FORCE_LFPS_PWD (0x1<<29) //29:29 ++#define RG_SSUSB_RXLFPS_OVF (0x1f<<24) //28:24 ++#define RG_SSUSB_P3_ENTRY_SEL (0x1<<23) //23:23 ++#define RG_SSUSB_P3_ENTRY (0x1<<22) //22:22 ++#define RG_SSUSB_RXLFPS_CDRSEL (0x3<<20) //21:20 ++#define RG_SSUSB_RXLFPS_CDRTH (0xf<<16) //19:16 ++#define RG_SSUSB_LOCK5G_BLOCK (0x1<<15) //15:15 ++#define RG_SSUSB_TFIFO_EXT_D_SEL (0x1<<14) //14:14 ++#define RG_SSUSB_TFIFO_NO_EXTEND (0x1<<13) //13:13 ++#define RG_SSUSB_RXLFPS_LOB (0x1f<<8) //12:8 ++#define RG_SSUSB_TXLFPS_EN (0x1<<7) //7:7 ++#define RG_SSUSB_TXLFPS_SEL (0x1<<6) //6:6 ++#define RG_SSUSB_RXLFPS_CDRLOCK (0x1<<5) //5:5 ++#define RG_SSUSB_RXLFPS_UPB (0x1f<<0) //4:0 ++ ++//U3D_PHYD_LFPS1 ++#define RG_SSUSB_RX_IMP_BIAS (0xf<<28) //31:28 ++#define RG_SSUSB_TX_IMP_BIAS (0xf<<24) //27:24 ++#define RG_SSUSB_FWAKE_TH (0x3f<<16) //21:16 ++#define RG_SSUSB_RXLFPS_UDF (0x1f<<8) //12:8 ++#define RG_SSUSB_RXLFPS_P0IDLETH (0xff<<0) //7:0 ++ ++//U3D_PHYD_IMPCAL0 ++#define RG_SSUSB_FORCE_TX_IMPSEL (0x1<<31) //31:31 ++#define RG_SSUSB_TX_IMPCAL_EN (0x1<<30) //30:30 ++#define RG_SSUSB_FORCE_TX_IMPCAL_EN (0x1<<29) //29:29 ++#define RG_SSUSB_TX_IMPSEL (0x1f<<24) //28:24 ++#define RG_SSUSB_TX_IMPCAL_CALCYC (0x3f<<16) //21:16 ++#define RG_SSUSB_TX_IMPCAL_STBCYC (0x1f<<10) //14:10 ++#define RG_SSUSB_TX_IMPCAL_CYCCNT (0x3ff<<0) //9:0 ++ ++//U3D_PHYD_IMPCAL1 ++#define RG_SSUSB_FORCE_RX_IMPSEL (0x1<<31) //31:31 ++#define RG_SSUSB_RX_IMPCAL_EN (0x1<<30) //30:30 ++#define RG_SSUSB_FORCE_RX_IMPCAL_EN (0x1<<29) //29:29 ++#define RG_SSUSB_RX_IMPSEL (0x1f<<24) //28:24 ++#define RG_SSUSB_RX_IMPCAL_CALCYC (0x3f<<16) //21:16 ++#define RG_SSUSB_RX_IMPCAL_STBCYC (0x1f<<10) //14:10 ++#define RG_SSUSB_RX_IMPCAL_CYCCNT (0x3ff<<0) //9:0 ++ ++//U3D_PHYD_TXPLL0 ++#define RG_SSUSB_TXPLL_DDSEN_CYC (0x1f<<27) //31:27 ++#define RG_SSUSB_TXPLL_ON (0x1<<26) //26:26 ++#define RG_SSUSB_FORCE_TXPLLON (0x1<<25) //25:25 ++#define RG_SSUSB_TXPLL_STBCYC (0x1ff<<16) //24:16 ++#define RG_SSUSB_TXPLL_NCPOCHG_CYC (0xf<<12) //15:12 ++#define RG_SSUSB_TXPLL_NCPOEN_CYC (0x3<<10) //11:10 ++#define RG_SSUSB_TXPLL_DDSRSTB_CYC (0x7<<0) //2:0 ++ ++//U3D_PHYD_TXPLL1 ++#define RG_SSUSB_PLL_NCPO_EN (0x1<<31) //31:31 ++#define RG_SSUSB_PLL_FIFO_START_MAN (0x1<<30) //30:30 ++#define RG_SSUSB_PLL_NCPO_CHG (0x1<<28) //28:28 ++#define RG_SSUSB_PLL_DDS_RSTB (0x1<<27) //27:27 ++#define RG_SSUSB_PLL_DDS_PWDB (0x1<<26) //26:26 ++#define RG_SSUSB_PLL_DDSEN (0x1<<25) //25:25 ++#define RG_SSUSB_PLL_AUTOK_VCO (0x1<<24) //24:24 ++#define RG_SSUSB_PLL_PWD (0x1<<23) //23:23 ++#define RG_SSUSB_RX_AFE_PWD (0x1<<22) //22:22 ++#define RG_SSUSB_PLL_TCADJ (0x3f<<16) //21:16 ++#define RG_SSUSB_FORCE_CDR_TCADJ (0x1<<15) //15:15 ++#define RG_SSUSB_FORCE_CDR_AUTOK_VCO (0x1<<14) //14:14 ++#define RG_SSUSB_FORCE_CDR_PWD (0x1<<13) //13:13 ++#define RG_SSUSB_FORCE_PLL_NCPO_EN (0x1<<12) //12:12 ++#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN (0x1<<11) //11:11 ++#define RG_SSUSB_FORCE_PLL_NCPO_CHG (0x1<<9) //9:9 ++#define RG_SSUSB_FORCE_PLL_DDS_RSTB (0x1<<8) //8:8 ++#define RG_SSUSB_FORCE_PLL_DDS_PWDB (0x1<<7) //7:7 ++#define RG_SSUSB_FORCE_PLL_DDSEN (0x1<<6) //6:6 ++#define RG_SSUSB_FORCE_PLL_TCADJ (0x1<<5) //5:5 ++#define RG_SSUSB_FORCE_PLL_AUTOK_VCO (0x1<<4) //4:4 ++#define RG_SSUSB_FORCE_PLL_PWD (0x1<<3) //3:3 ++#define RG_SSUSB_FLT_1_DISPERR_B (0x1<<2) //2:2 ++ ++//U3D_PHYD_TXPLL2 ++#define RG_SSUSB_TX_LFPS_EN (0x1<<31) //31:31 ++#define RG_SSUSB_FORCE_TX_LFPS_EN (0x1<<30) //30:30 ++#define RG_SSUSB_TX_LFPS (0x1<<29) //29:29 ++#define RG_SSUSB_FORCE_TX_LFPS (0x1<<28) //28:28 ++#define RG_SSUSB_RXPLL_STB (0x1<<27) //27:27 ++#define RG_SSUSB_TXPLL_STB (0x1<<26) //26:26 ++#define RG_SSUSB_FORCE_RXPLL_STB (0x1<<25) //25:25 ++#define RG_SSUSB_FORCE_TXPLL_STB (0x1<<24) //24:24 ++#define RG_SSUSB_RXPLL_REFCKSEL (0x1<<16) //16:16 ++#define RG_SSUSB_RXPLL_STBMODE (0x1<<11) //11:11 ++#define RG_SSUSB_RXPLL_ON (0x1<<10) //10:10 ++#define RG_SSUSB_FORCE_RXPLLON (0x1<<9) //9:9 ++#define RG_SSUSB_FORCE_RX_AFE_PWD (0x1<<8) //8:8 ++#define RG_SSUSB_CDR_AUTOK_VCO (0x1<<7) //7:7 ++#define RG_SSUSB_CDR_PWD (0x1<<6) //6:6 ++#define RG_SSUSB_CDR_TCADJ (0x3f<<0) //5:0 ++ ++//U3D_PHYD_FL0 ++#define RG_SSUSB_RX_FL_TARGET (0xffff<<16) //31:16 ++#define RG_SSUSB_RX_FL_CYCLECNT (0xffff<<0) //15:0 ++ ++//U3D_PHYD_MIX2 ++#define RG_SSUSB_RX_EQ_RST (0x1<<31) //31:31 ++#define RG_SSUSB_RX_EQ_RST_SEL (0x1<<30) //30:30 ++#define RG_SSUSB_RXVAL_RST (0x1<<29) //29:29 ++#define RG_SSUSB_RXVAL_CNT (0x1f<<24) //28:24 ++#define RG_SSUSB_CDROS_EN (0x1<<18) //18:18 ++#define RG_SSUSB_CDR_LCKOP (0x3<<16) //17:16 ++#define RG_SSUSB_RX_FL_LOCKTH (0xf<<8) //11:8 ++#define RG_SSUSB_RX_FL_OFFSET (0xff<<0) //7:0 ++ ++//U3D_PHYD_RX0 ++#define RG_SSUSB_T2RLB_BERTH (0xff<<24) //31:24 ++#define RG_SSUSB_T2RLB_PAT (0xff<<16) //23:16 ++#define RG_SSUSB_T2RLB_EN (0x1<<15) //15:15 ++#define RG_SSUSB_T2RLB_BPSCRAMB (0x1<<14) //14:14 ++#define RG_SSUSB_T2RLB_SERIAL (0x1<<13) //13:13 ++#define RG_SSUSB_T2RLB_MODE (0x3<<11) //12:11 ++#define RG_SSUSB_RX_SAOSC_EN (0x1<<10) //10:10 ++#define RG_SSUSB_RX_SAOSC_EN_SEL (0x1<<9) //9:9 ++#define RG_SSUSB_RX_DFE_OPTION (0x1<<8) //8:8 ++#define RG_SSUSB_RX_DFE_EN (0x1<<7) //7:7 ++#define RG_SSUSB_RX_DFE_EN_SEL (0x1<<6) //6:6 ++#define RG_SSUSB_RX_EQ_EN (0x1<<5) //5:5 ++#define RG_SSUSB_RX_EQ_EN_SEL (0x1<<4) //4:4 ++#define RG_SSUSB_RX_SAOSC_RST (0x1<<3) //3:3 ++#define RG_SSUSB_RX_SAOSC_RST_SEL (0x1<<2) //2:2 ++#define RG_SSUSB_RX_DFE_RST (0x1<<1) //1:1 ++#define RG_SSUSB_RX_DFE_RST_SEL (0x1<<0) //0:0 ++ ++//U3D_PHYD_T2RLB ++#define RG_SSUSB_EQTRAIN_CH_MODE (0x1<<28) //28:28 ++#define RG_SSUSB_PRB_OUT_CPPAT (0x1<<27) //27:27 ++#define RG_SSUSB_BPANSIENC (0x1<<26) //26:26 ++#define RG_SSUSB_VALID_EN (0x1<<25) //25:25 ++#define RG_SSUSB_EBUF_SRST (0x1<<24) //24:24 ++#define RG_SSUSB_K_EMP (0xf<<20) //23:20 ++#define RG_SSUSB_K_FUL (0xf<<16) //19:16 ++#define RG_SSUSB_T2RLB_BDATRST (0xf<<12) //15:12 ++#define RG_SSUSB_P_T2RLB_SKP_EN (0x1<<10) //10:10 ++#define RG_SSUSB_T2RLB_PATMODE (0x3<<8) //9:8 ++#define RG_SSUSB_T2RLB_TSEQCNT (0xff<<0) //7:0 ++ ++//U3D_PHYD_CPPAT ++#define RG_SSUSB_CPPAT_PROGRAM_EN (0x1<<24) //24:24 ++#define RG_SSUSB_CPPAT_TOZ (0x3<<21) //22:21 ++#define RG_SSUSB_CPPAT_PRBS_EN (0x1<<20) //20:20 ++#define RG_SSUSB_CPPAT_OUT_TMP2 (0xf<<16) //19:16 ++#define RG_SSUSB_CPPAT_OUT_TMP1 (0xff<<8) //15:8 ++#define RG_SSUSB_CPPAT_OUT_TMP0 (0xff<<0) //7:0 ++ ++//U3D_PHYD_MIX3 ++#define RG_SSUSB_CDR_TCADJ_MINUS (0x1<<31) //31:31 ++#define RG_SSUSB_P_CDROS_EN (0x1<<30) //30:30 ++#define RG_SSUSB_P_P2_TX_DRV_DIS (0x1<<28) //28:28 ++#define RG_SSUSB_CDR_TCADJ_OFFSET (0x7<<24) //26:24 ++#define RG_SSUSB_PLL_TCADJ_MINUS (0x1<<23) //23:23 ++#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN (0x1<<20) //20:20 ++#define RG_SSUSB_PLL_BIAS_LPF_EN (0x1<<19) //19:19 ++#define RG_SSUSB_PLL_TCADJ_OFFSET (0x7<<16) //18:16 ++#define RG_SSUSB_FORCE_PLL_SSCEN (0x1<<15) //15:15 ++#define RG_SSUSB_PLL_SSCEN (0x1<<14) //14:14 ++#define RG_SSUSB_FORCE_CDR_PI_PWD (0x1<<13) //13:13 ++#define RG_SSUSB_CDR_PI_PWD (0x1<<12) //12:12 ++#define RG_SSUSB_CDR_PI_MODE (0x1<<11) //11:11 ++#define RG_SSUSB_TXPLL_SSCEN_CYC (0x3ff<<0) //9:0 ++ ++//U3D_PHYD_EBUFCTL ++#define RG_SSUSB_EBUFCTL (0xffffffff<<0) //31:0 ++ ++//U3D_PHYD_PIPE0 ++#define RG_SSUSB_RXTERMINATION (0x1<<30) //30:30 ++#define RG_SSUSB_RXEQTRAINING (0x1<<29) //29:29 ++#define RG_SSUSB_RXPOLARITY (0x1<<28) //28:28 ++#define RG_SSUSB_TXDEEMPH (0x3<<26) //27:26 ++#define RG_SSUSB_POWERDOWN (0x3<<24) //25:24 ++#define RG_SSUSB_TXONESZEROS (0x1<<23) //23:23 ++#define RG_SSUSB_TXELECIDLE (0x1<<22) //22:22 ++#define RG_SSUSB_TXDETECTRX (0x1<<21) //21:21 ++#define RG_SSUSB_PIPE_SEL (0x1<<20) //20:20 ++#define RG_SSUSB_TXDATAK (0xf<<16) //19:16 ++#define RG_SSUSB_CDR_STABLE_SEL (0x1<<15) //15:15 ++#define RG_SSUSB_CDR_STABLE (0x1<<14) //14:14 ++#define RG_SSUSB_CDR_RSTB_SEL (0x1<<13) //13:13 ++#define RG_SSUSB_CDR_RSTB (0x1<<12) //12:12 ++#define RG_SSUSB_P_ERROR_SEL (0x3<<4) //5:4 ++#define RG_SSUSB_TXMARGIN (0x7<<1) //3:1 ++#define RG_SSUSB_TXCOMPLIANCE (0x1<<0) //0:0 ++ ++//U3D_PHYD_PIPE1 ++#define RG_SSUSB_TXDATA (0xffffffff<<0) //31:0 ++ ++//U3D_PHYD_MIX4 ++#define RG_SSUSB_CDROS_CNT (0x3f<<24) //29:24 ++#define RG_SSUSB_T2RLB_BER_EN (0x1<<16) //16:16 ++#define RG_SSUSB_T2RLB_BER_RATE (0xffff<<0) //15:0 ++ ++//U3D_PHYD_CKGEN0 ++#define RG_SSUSB_RFIFO_IMPLAT (0x1<<27) //27:27 ++#define RG_SSUSB_TFIFO_PSEL (0x7<<24) //26:24 ++#define RG_SSUSB_CKGEN_PSEL (0x3<<8) //9:8 ++#define RG_SSUSB_RXCK_INV (0x1<<0) //0:0 ++ ++//U3D_PHYD_MIX5 ++#define RG_SSUSB_PRB_SEL (0xffff<<16) //31:16 ++#define RG_SSUSB_RXPLL_STBCYC (0x7ff<<0) //10:0 ++ ++//U3D_PHYD_RESERVED ++#define RG_SSUSB_PHYD_RESERVE (0xffffffff<<0) //31:0 ++//#define RG_SSUSB_RX_SIGDET_SEL (0x1<<11) ++//#define RG_SSUSB_RX_SIGDET_EN (0x1<<12) ++//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL (0x1<<9) ++//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN (0x1<<10) ++ ++//U3D_PHYD_CDR0 ++#define RG_SSUSB_CDR_BIC_LTR (0xf<<28) //31:28 ++#define RG_SSUSB_CDR_BIC_LTD0 (0xf<<24) //27:24 ++#define RG_SSUSB_CDR_BC_LTD1 (0x1f<<16) //20:16 ++#define RG_SSUSB_CDR_BC_LTR (0x1f<<8) //12:8 ++#define RG_SSUSB_CDR_BC_LTD0 (0x1f<<0) //4:0 ++ ++//U3D_PHYD_CDR1 ++#define RG_SSUSB_CDR_BIR_LTD1 (0x1f<<24) //28:24 ++#define RG_SSUSB_CDR_BIR_LTR (0x1f<<16) //20:16 ++#define RG_SSUSB_CDR_BIR_LTD0 (0x1f<<8) //12:8 ++#define RG_SSUSB_CDR_BW_SEL (0x3<<6) //7:6 ++#define RG_SSUSB_CDR_BIC_LTD1 (0xf<<0) //3:0 ++ ++//U3D_PHYD_PLL_0 ++#define RG_SSUSB_FORCE_CDR_BAND_5G (0x1<<28) //28:28 ++#define RG_SSUSB_FORCE_CDR_BAND_2P5G (0x1<<27) //27:27 ++#define RG_SSUSB_FORCE_PLL_BAND_5G (0x1<<26) //26:26 ++#define RG_SSUSB_FORCE_PLL_BAND_2P5G (0x1<<25) //25:25 ++#define RG_SSUSB_P_EQ_T_SEL (0x3ff<<15) //24:15 ++#define RG_SSUSB_PLL_ISO_EN_CYC (0x3ff<<5) //14:5 ++#define RG_SSUSB_PLLBAND_RECAL (0x1<<4) //4:4 ++#define RG_SSUSB_PLL_DDS_ISO_EN (0x1<<3) //3:3 ++#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN (0x1<<2) //2:2 ++#define RG_SSUSB_PLL_DDS_PWR_ON (0x1<<1) //1:1 ++#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON (0x1<<0) //0:0 ++ ++//U3D_PHYD_PLL_1 ++#define RG_SSUSB_CDR_BAND_5G (0xff<<24) //31:24 ++#define RG_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16 ++#define RG_SSUSB_PLL_BAND_5G (0xff<<8) //15:8 ++#define RG_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0 ++ ++//U3D_PHYD_BCN_DET_1 ++#define RG_SSUSB_P_BCN_OBS_PRD (0xffff<<16) //31:16 ++#define RG_SSUSB_U_BCN_OBS_PRD (0xffff<<0) //15:0 ++ ++//U3D_PHYD_BCN_DET_2 ++#define RG_SSUSB_P_BCN_OBS_SEL (0xfff<<16) //27:16 ++#define RG_SSUSB_BCN_DET_DIS (0x1<<12) //12:12 ++#define RG_SSUSB_U_BCN_OBS_SEL (0xfff<<0) //11:0 ++ ++//U3D_EQ0 ++#define RG_SSUSB_EQ_DLHL_LFI (0x7f<<24) //30:24 ++#define RG_SSUSB_EQ_DHHL_LFI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_DD0HOS_LFI (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_DD0LOS_LFI (0x7f<<0) //6:0 ++ ++//U3D_EQ1 ++#define RG_SSUSB_EQ_DD1HOS_LFI (0x7f<<24) //30:24 ++#define RG_SSUSB_EQ_DD1LOS_LFI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_DE0OS_LFI (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_DE1OS_LFI (0x7f<<0) //6:0 ++ ++//U3D_EQ2 ++#define RG_SSUSB_EQ_DLHLOS_LFI (0x7f<<24) //30:24 ++#define RG_SSUSB_EQ_DHHLOS_LFI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_STOPTIME (0x1<<14) //14:14 ++#define RG_SSUSB_EQ_DHHL_LF_SEL (0x7<<11) //13:11 ++#define RG_SSUSB_EQ_DSAOS_LF_SEL (0x7<<8) //10:8 ++#define RG_SSUSB_EQ_STARTTIME (0x3<<6) //7:6 ++#define RG_SSUSB_EQ_DLEQ_LF_SEL (0x7<<3) //5:3 ++#define RG_SSUSB_EQ_DLHL_LF_SEL (0x7<<0) //2:0 ++ ++//U3D_EQ3 ++#define RG_SSUSB_EQ_DLEQ_LFI_GEN2 (0xf<<28) //31:28 ++#define RG_SSUSB_EQ_DLEQ_LFI_GEN1 (0xf<<24) //27:24 ++#define RG_SSUSB_EQ_DEYE0OS_LFI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_DEYE1OS_LFI (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_TRI_DET_EN (0x1<<7) //7:7 ++#define RG_SSUSB_EQ_TRI_DET_TH (0x7f<<0) //6:0 ++ ++//U3D_EQ_EYE0 ++#define RG_SSUSB_EQ_EYE_XOFFSET (0x7f<<25) //31:25 ++#define RG_SSUSB_EQ_EYE_MON_EN (0x1<<24) //24:24 ++#define RG_SSUSB_EQ_EYE0_Y (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_EYE1_Y (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_PILPO_ROUT (0x1<<7) //7:7 ++#define RG_SSUSB_EQ_PI_KPGAIN (0x7<<4) //6:4 ++#define RG_SSUSB_EQ_EYE_CNT_EN (0x1<<3) //3:3 ++ ++//U3D_EQ_EYE1 ++#define RG_SSUSB_EQ_SIGDET (0x7f<<24) //30:24 ++#define RG_SSUSB_EQ_EYE_MASK (0x3ff<<7) //16:7 ++ ++//U3D_EQ_EYE2 ++#define RG_SSUSB_EQ_RX500M_CK_SEL (0x1<<31) //31:31 ++#define RG_SSUSB_EQ_SD_CNT1 (0x3f<<24) //29:24 ++#define RG_SSUSB_EQ_ISIFLAG_SEL (0x3<<22) //23:22 ++#define RG_SSUSB_EQ_SD_CNT0 (0x3f<<16) //21:16 ++ ++//U3D_EQ_DFE0 ++#define RG_SSUSB_EQ_LEQMAX (0xf<<28) //31:28 ++#define RG_SSUSB_EQ_DFEX_EN (0x1<<27) //27:27 ++#define RG_SSUSB_EQ_DFEX_LF_SEL (0x7<<24) //26:24 ++#define RG_SSUSB_EQ_CHK_EYE_H (0x1<<23) //23:23 ++#define RG_SSUSB_EQ_PIEYE_INI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_PI90_INI (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_PI0_INI (0x7f<<0) //6:0 ++ ++//U3D_EQ_DFE1 ++#define RG_SSUSB_EQ_REV (0xffff<<16) //31:16 ++#define RG_SSUSB_EQ_DFEYEN_DUR (0x7<<12) //14:12 ++#define RG_SSUSB_EQ_DFEXEN_DUR (0x7<<8) //10:8 ++#define RG_SSUSB_EQ_DFEX_RST (0x1<<7) //7:7 ++#define RG_SSUSB_EQ_GATED_RXD_B (0x1<<6) //6:6 ++#define RG_SSUSB_EQ_PI90CK_SEL (0x3<<4) //5:4 ++#define RG_SSUSB_EQ_DFEX_DIS (0x1<<2) //2:2 ++#define RG_SSUSB_EQ_DFEYEN_STOP_DIS (0x1<<1) //1:1 ++#define RG_SSUSB_EQ_DFEXEN_SEL (0x1<<0) //0:0 ++ ++//U3D_EQ_DFE2 ++#define RG_SSUSB_EQ_MON_SEL (0x1f<<24) //28:24 ++#define RG_SSUSB_EQ_LEQOSC_DLYCNT (0x7<<16) //18:16 ++#define RG_SSUSB_EQ_DLEQOS_LFI (0x1f<<8) //12:8 ++#define RG_SSUSB_EQ_LEQ_STOP_TO (0x3<<0) //1:0 ++ ++//U3D_EQ_DFE3 ++#define RG_SSUSB_EQ_RESERVED (0xffffffff<<0) //31:0 ++ ++//U3D_PHYD_MON0 ++#define RGS_SSUSB_BERT_BERC (0xffff<<16) //31:16 ++#define RGS_SSUSB_LFPS (0xf<<12) //15:12 ++#define RGS_SSUSB_TRAINDEC (0x7<<8) //10:8 ++#define RGS_SSUSB_SCP_PAT (0xff<<0) //7:0 ++ ++//U3D_PHYD_MON1 ++#define RGS_SSUSB_RX_FL_OUT (0xffff<<0) //15:0 ++ ++//U3D_PHYD_MON2 ++#define RGS_SSUSB_T2RLB_ERRCNT (0xffff<<16) //31:16 ++#define RGS_SSUSB_RETRACK (0xf<<12) //15:12 ++#define RGS_SSUSB_RXPLL_LOCK (0x1<<10) //10:10 ++#define RGS_SSUSB_CDR_VCOCAL_CPLT_D (0x1<<9) //9:9 ++#define RGS_SSUSB_PLL_VCOCAL_CPLT_D (0x1<<8) //8:8 ++#define RGS_SSUSB_PDNCTL (0xff<<0) //7:0 ++ ++//U3D_PHYD_MON3 ++#define RGS_SSUSB_TSEQ_ERRCNT (0xffff<<16) //31:16 ++#define RGS_SSUSB_PRBS_ERRCNT (0xffff<<0) //15:0 ++ ++//U3D_PHYD_MON4 ++#define RGS_SSUSB_RX_LSLOCK_CNT (0xf<<24) //27:24 ++#define RGS_SSUSB_SCP_DETCNT (0xff<<16) //23:16 ++#define RGS_SSUSB_TSEQ_DETCNT (0xffff<<0) //15:0 ++ ++//U3D_PHYD_MON5 ++#define RGS_SSUSB_EBUFMSG (0xffff<<16) //31:16 ++#define RGS_SSUSB_BERT_LOCK (0x1<<15) //15:15 ++#define RGS_SSUSB_SCP_DET (0x1<<14) //14:14 ++#define RGS_SSUSB_TSEQ_DET (0x1<<13) //13:13 ++#define RGS_SSUSB_EBUF_UDF (0x1<<12) //12:12 ++#define RGS_SSUSB_EBUF_OVF (0x1<<11) //11:11 ++#define RGS_SSUSB_PRBS_PASSTH (0x1<<10) //10:10 ++#define RGS_SSUSB_PRBS_PASS (0x1<<9) //9:9 ++#define RGS_SSUSB_PRBS_LOCK (0x1<<8) //8:8 ++#define RGS_SSUSB_T2RLB_ERR (0x1<<6) //6:6 ++#define RGS_SSUSB_T2RLB_PASSTH (0x1<<5) //5:5 ++#define RGS_SSUSB_T2RLB_PASS (0x1<<4) //4:4 ++#define RGS_SSUSB_T2RLB_LOCK (0x1<<3) //3:3 ++#define RGS_SSUSB_RX_IMPCAL_DONE (0x1<<2) //2:2 ++#define RGS_SSUSB_TX_IMPCAL_DONE (0x1<<1) //1:1 ++#define RGS_SSUSB_RXDETECTED (0x1<<0) //0:0 ++ ++//U3D_PHYD_MON6 ++#define RGS_SSUSB_SIGCAL_DONE (0x1<<30) //30:30 ++#define RGS_SSUSB_SIGCAL_CAL_OUT (0x1<<29) //29:29 ++#define RGS_SSUSB_SIGCAL_OFFSET (0x1f<<24) //28:24 ++#define RGS_SSUSB_RX_IMP_SEL (0x1f<<16) //20:16 ++#define RGS_SSUSB_TX_IMP_SEL (0x1f<<8) //12:8 ++#define RGS_SSUSB_TFIFO_MSG (0xf<<4) //7:4 ++#define RGS_SSUSB_RFIFO_MSG (0xf<<0) //3:0 ++ ++//U3D_PHYD_MON7 ++#define RGS_SSUSB_FT_OUT (0xff<<8) //15:8 ++#define RGS_SSUSB_PRB_OUT (0xff<<0) //7:0 ++ ++//U3D_PHYA_RX_MON0 ++#define RGS_SSUSB_EQ_DCLEQ (0xf<<24) //27:24 ++#define RGS_SSUSB_EQ_DCD0H (0x7f<<16) //22:16 ++#define RGS_SSUSB_EQ_DCD0L (0x7f<<8) //14:8 ++#define RGS_SSUSB_EQ_DCD1H (0x7f<<0) //6:0 ++ ++//U3D_PHYA_RX_MON1 ++#define RGS_SSUSB_EQ_DCD1L (0x7f<<24) //30:24 ++#define RGS_SSUSB_EQ_DCE0 (0x7f<<16) //22:16 ++#define RGS_SSUSB_EQ_DCE1 (0x7f<<8) //14:8 ++#define RGS_SSUSB_EQ_DCHHL (0x7f<<0) //6:0 ++ ++//U3D_PHYA_RX_MON2 ++#define RGS_SSUSB_EQ_LEQ_STOP (0x1<<31) //31:31 ++#define RGS_SSUSB_EQ_DCLHL (0x7f<<24) //30:24 ++#define RGS_SSUSB_EQ_STATUS (0xff<<16) //23:16 ++#define RGS_SSUSB_EQ_DCEYE0 (0x7f<<8) //14:8 ++#define RGS_SSUSB_EQ_DCEYE1 (0x7f<<0) //6:0 ++ ++//U3D_PHYA_RX_MON3 ++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0 (0xfffff<<0) //19:0 ++ ++//U3D_PHYA_RX_MON4 ++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1 (0xfffff<<0) //19:0 ++ ++//U3D_PHYA_RX_MON5 ++#define RGS_SSUSB_EQ_DCLEQOS (0x1f<<8) //12:8 ++#define RGS_SSUSB_EQ_EYE_CNT_RDY (0x1<<7) //7:7 ++#define RGS_SSUSB_EQ_PILPO (0x7f<<0) //6:0 ++ ++//U3D_PHYD_CPPAT2 ++#define RG_SSUSB_CPPAT_OUT_H_TMP2 (0xf<<16) //19:16 ++#define RG_SSUSB_CPPAT_OUT_H_TMP1 (0xff<<8) //15:8 ++#define RG_SSUSB_CPPAT_OUT_H_TMP0 (0xff<<0) //7:0 ++ ++//U3D_EQ_EYE3 ++#define RG_SSUSB_EQ_LEQ_SHIFT (0x7<<24) //26:24 ++#define RG_SSUSB_EQ_EYE_CNT (0xfffff<<0) //19:0 ++ ++//U3D_KBAND_OUT ++#define RGS_SSUSB_CDR_BAND_5G (0xff<<24) //31:24 ++#define RGS_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16 ++#define RGS_SSUSB_PLL_BAND_5G (0xff<<8) //15:8 ++#define RGS_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0 ++ ++//U3D_KBAND_OUT1 ++#define RGS_SSUSB_CDR_VCOCAL_FAIL (0x1<<24) //24:24 ++#define RGS_SSUSB_CDR_VCOCAL_STATE (0xff<<16) //23:16 ++#define RGS_SSUSB_PLL_VCOCAL_FAIL (0x1<<8) //8:8 ++#define RGS_SSUSB_PLL_VCOCAL_STATE (0xff<<0) //7:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_PHYD_MIX0 ++#define RG_SSUSB_P_P3_TX_NG_OFST (31) ++#define RG_SSUSB_TSEQ_EN_OFST (30) ++#define RG_SSUSB_TSEQ_POLEN_OFST (29) ++#define RG_SSUSB_TSEQ_POL_OFST (28) ++#define RG_SSUSB_P_P3_PCLK_NG_OFST (27) ++#define RG_SSUSB_TSEQ_TH_OFST (24) ++#define RG_SSUSB_PRBS_BERTH_OFST (16) ++#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST (15) ++#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST (14) ++#define RG_SSUSB_PRBS_EN_OFST (13) ++#define RG_SSUSB_BPSLOCK_OFST (12) ++#define RG_SSUSB_RTCOMCNT_OFST (8) ++#define RG_SSUSB_COMCNT_OFST (4) ++#define RG_SSUSB_PRBSEL_CALIB_OFST (0) ++ ++//U3D_PHYD_MIX1 ++#define RG_SSUSB_SLEEP_EN_OFST (31) ++#define RG_SSUSB_PRBSEL_PCS_OFST (28) ++#define RG_SSUSB_TXLFPS_PRD_OFST (24) ++#define RG_SSUSB_P_RX_P0S_CK_OFST (23) ++#define RG_SSUSB_P_TX_P0S_CK_OFST (22) ++#define RG_SSUSB_PDNCTL_OFST (16) ++#define RG_SSUSB_TX_DRV_EN_OFST (15) ++#define RG_SSUSB_TX_DRV_SEL_OFST (14) ++#define RG_SSUSB_TX_DRV_DLY_OFST (8) ++#define RG_SSUSB_BERT_EN_OFST (7) ++#define RG_SSUSB_SCP_TH_OFST (4) ++#define RG_SSUSB_SCP_EN_OFST (3) ++#define RG_SSUSB_RXANSIDEC_TEST_OFST (0) ++ ++//U3D_PHYD_LFPS0 ++#define RG_SSUSB_LFPS_PWD_OFST (30) ++#define RG_SSUSB_FORCE_LFPS_PWD_OFST (29) ++#define RG_SSUSB_RXLFPS_OVF_OFST (24) ++#define RG_SSUSB_P3_ENTRY_SEL_OFST (23) ++#define RG_SSUSB_P3_ENTRY_OFST (22) ++#define RG_SSUSB_RXLFPS_CDRSEL_OFST (20) ++#define RG_SSUSB_RXLFPS_CDRTH_OFST (16) ++#define RG_SSUSB_LOCK5G_BLOCK_OFST (15) ++#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST (14) ++#define RG_SSUSB_TFIFO_NO_EXTEND_OFST (13) ++#define RG_SSUSB_RXLFPS_LOB_OFST (8) ++#define RG_SSUSB_TXLFPS_EN_OFST (7) ++#define RG_SSUSB_TXLFPS_SEL_OFST (6) ++#define RG_SSUSB_RXLFPS_CDRLOCK_OFST (5) ++#define RG_SSUSB_RXLFPS_UPB_OFST (0) ++ ++//U3D_PHYD_LFPS1 ++#define RG_SSUSB_RX_IMP_BIAS_OFST (28) ++#define RG_SSUSB_TX_IMP_BIAS_OFST (24) ++#define RG_SSUSB_FWAKE_TH_OFST (16) ++#define RG_SSUSB_RXLFPS_UDF_OFST (8) ++#define RG_SSUSB_RXLFPS_P0IDLETH_OFST (0) ++ ++//U3D_PHYD_IMPCAL0 ++#define RG_SSUSB_FORCE_TX_IMPSEL_OFST (31) ++#define RG_SSUSB_TX_IMPCAL_EN_OFST (30) ++#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST (29) ++#define RG_SSUSB_TX_IMPSEL_OFST (24) ++#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST (16) ++#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST (10) ++#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST (0) ++ ++//U3D_PHYD_IMPCAL1 ++#define RG_SSUSB_FORCE_RX_IMPSEL_OFST (31) ++#define RG_SSUSB_RX_IMPCAL_EN_OFST (30) ++#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST (29) ++#define RG_SSUSB_RX_IMPSEL_OFST (24) ++#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST (16) ++#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST (10) ++#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST (0) ++ ++//U3D_PHYD_TXPLL0 ++#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST (27) ++#define RG_SSUSB_TXPLL_ON_OFST (26) ++#define RG_SSUSB_FORCE_TXPLLON_OFST (25) ++#define RG_SSUSB_TXPLL_STBCYC_OFST (16) ++#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST (12) ++#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST (10) ++#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST (0) ++ ++//U3D_PHYD_TXPLL1 ++#define RG_SSUSB_PLL_NCPO_EN_OFST (31) ++#define RG_SSUSB_PLL_FIFO_START_MAN_OFST (30) ++#define RG_SSUSB_PLL_NCPO_CHG_OFST (28) ++#define RG_SSUSB_PLL_DDS_RSTB_OFST (27) ++#define RG_SSUSB_PLL_DDS_PWDB_OFST (26) ++#define RG_SSUSB_PLL_DDSEN_OFST (25) ++#define RG_SSUSB_PLL_AUTOK_VCO_OFST (24) ++#define RG_SSUSB_PLL_PWD_OFST (23) ++#define RG_SSUSB_RX_AFE_PWD_OFST (22) ++#define RG_SSUSB_PLL_TCADJ_OFST (16) ++#define RG_SSUSB_FORCE_CDR_TCADJ_OFST (15) ++#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST (14) ++#define RG_SSUSB_FORCE_CDR_PWD_OFST (13) ++#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST (12) ++#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST (11) ++#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST (9) ++#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST (8) ++#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST (7) ++#define RG_SSUSB_FORCE_PLL_DDSEN_OFST (6) ++#define RG_SSUSB_FORCE_PLL_TCADJ_OFST (5) ++#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST (4) ++#define RG_SSUSB_FORCE_PLL_PWD_OFST (3) ++#define RG_SSUSB_FLT_1_DISPERR_B_OFST (2) ++ ++//U3D_PHYD_TXPLL2 ++#define RG_SSUSB_TX_LFPS_EN_OFST (31) ++#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST (30) ++#define RG_SSUSB_TX_LFPS_OFST (29) ++#define RG_SSUSB_FORCE_TX_LFPS_OFST (28) ++#define RG_SSUSB_RXPLL_STB_OFST (27) ++#define RG_SSUSB_TXPLL_STB_OFST (26) ++#define RG_SSUSB_FORCE_RXPLL_STB_OFST (25) ++#define RG_SSUSB_FORCE_TXPLL_STB_OFST (24) ++#define RG_SSUSB_RXPLL_REFCKSEL_OFST (16) ++#define RG_SSUSB_RXPLL_STBMODE_OFST (11) ++#define RG_SSUSB_RXPLL_ON_OFST (10) ++#define RG_SSUSB_FORCE_RXPLLON_OFST (9) ++#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST (8) ++#define RG_SSUSB_CDR_AUTOK_VCO_OFST (7) ++#define RG_SSUSB_CDR_PWD_OFST (6) ++#define RG_SSUSB_CDR_TCADJ_OFST (0) ++ ++//U3D_PHYD_FL0 ++#define RG_SSUSB_RX_FL_TARGET_OFST (16) ++#define RG_SSUSB_RX_FL_CYCLECNT_OFST (0) ++ ++//U3D_PHYD_MIX2 ++#define RG_SSUSB_RX_EQ_RST_OFST (31) ++#define RG_SSUSB_RX_EQ_RST_SEL_OFST (30) ++#define RG_SSUSB_RXVAL_RST_OFST (29) ++#define RG_SSUSB_RXVAL_CNT_OFST (24) ++#define RG_SSUSB_CDROS_EN_OFST (18) ++#define RG_SSUSB_CDR_LCKOP_OFST (16) ++#define RG_SSUSB_RX_FL_LOCKTH_OFST (8) ++#define RG_SSUSB_RX_FL_OFFSET_OFST (0) ++ ++//U3D_PHYD_RX0 ++#define RG_SSUSB_T2RLB_BERTH_OFST (24) ++#define RG_SSUSB_T2RLB_PAT_OFST (16) ++#define RG_SSUSB_T2RLB_EN_OFST (15) ++#define RG_SSUSB_T2RLB_BPSCRAMB_OFST (14) ++#define RG_SSUSB_T2RLB_SERIAL_OFST (13) ++#define RG_SSUSB_T2RLB_MODE_OFST (11) ++#define RG_SSUSB_RX_SAOSC_EN_OFST (10) ++#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST (9) ++#define RG_SSUSB_RX_DFE_OPTION_OFST (8) ++#define RG_SSUSB_RX_DFE_EN_OFST (7) ++#define RG_SSUSB_RX_DFE_EN_SEL_OFST (6) ++#define RG_SSUSB_RX_EQ_EN_OFST (5) ++#define RG_SSUSB_RX_EQ_EN_SEL_OFST (4) ++#define RG_SSUSB_RX_SAOSC_RST_OFST (3) ++#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST (2) ++#define RG_SSUSB_RX_DFE_RST_OFST (1) ++#define RG_SSUSB_RX_DFE_RST_SEL_OFST (0) ++ ++//U3D_PHYD_T2RLB ++#define RG_SSUSB_EQTRAIN_CH_MODE_OFST (28) ++#define RG_SSUSB_PRB_OUT_CPPAT_OFST (27) ++#define RG_SSUSB_BPANSIENC_OFST (26) ++#define RG_SSUSB_VALID_EN_OFST (25) ++#define RG_SSUSB_EBUF_SRST_OFST (24) ++#define RG_SSUSB_K_EMP_OFST (20) ++#define RG_SSUSB_K_FUL_OFST (16) ++#define RG_SSUSB_T2RLB_BDATRST_OFST (12) ++#define RG_SSUSB_P_T2RLB_SKP_EN_OFST (10) ++#define RG_SSUSB_T2RLB_PATMODE_OFST (8) ++#define RG_SSUSB_T2RLB_TSEQCNT_OFST (0) ++ ++//U3D_PHYD_CPPAT ++#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST (24) ++#define RG_SSUSB_CPPAT_TOZ_OFST (21) ++#define RG_SSUSB_CPPAT_PRBS_EN_OFST (20) ++#define RG_SSUSB_CPPAT_OUT_TMP2_OFST (16) ++#define RG_SSUSB_CPPAT_OUT_TMP1_OFST (8) ++#define RG_SSUSB_CPPAT_OUT_TMP0_OFST (0) ++ ++//U3D_PHYD_MIX3 ++#define RG_SSUSB_CDR_TCADJ_MINUS_OFST (31) ++#define RG_SSUSB_P_CDROS_EN_OFST (30) ++#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST (28) ++#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST (24) ++#define RG_SSUSB_PLL_TCADJ_MINUS_OFST (23) ++#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST (20) ++#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST (19) ++#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST (16) ++#define RG_SSUSB_FORCE_PLL_SSCEN_OFST (15) ++#define RG_SSUSB_PLL_SSCEN_OFST (14) ++#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST (13) ++#define RG_SSUSB_CDR_PI_PWD_OFST (12) ++#define RG_SSUSB_CDR_PI_MODE_OFST (11) ++#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST (0) ++ ++//U3D_PHYD_EBUFCTL ++#define RG_SSUSB_EBUFCTL_OFST (0) ++ ++//U3D_PHYD_PIPE0 ++#define RG_SSUSB_RXTERMINATION_OFST (30) ++#define RG_SSUSB_RXEQTRAINING_OFST (29) ++#define RG_SSUSB_RXPOLARITY_OFST (28) ++#define RG_SSUSB_TXDEEMPH_OFST (26) ++#define RG_SSUSB_POWERDOWN_OFST (24) ++#define RG_SSUSB_TXONESZEROS_OFST (23) ++#define RG_SSUSB_TXELECIDLE_OFST (22) ++#define RG_SSUSB_TXDETECTRX_OFST (21) ++#define RG_SSUSB_PIPE_SEL_OFST (20) ++#define RG_SSUSB_TXDATAK_OFST (16) ++#define RG_SSUSB_CDR_STABLE_SEL_OFST (15) ++#define RG_SSUSB_CDR_STABLE_OFST (14) ++#define RG_SSUSB_CDR_RSTB_SEL_OFST (13) ++#define RG_SSUSB_CDR_RSTB_OFST (12) ++#define RG_SSUSB_P_ERROR_SEL_OFST (4) ++#define RG_SSUSB_TXMARGIN_OFST (1) ++#define RG_SSUSB_TXCOMPLIANCE_OFST (0) ++ ++//U3D_PHYD_PIPE1 ++#define RG_SSUSB_TXDATA_OFST (0) ++ ++//U3D_PHYD_MIX4 ++#define RG_SSUSB_CDROS_CNT_OFST (24) ++#define RG_SSUSB_T2RLB_BER_EN_OFST (16) ++#define RG_SSUSB_T2RLB_BER_RATE_OFST (0) ++ ++//U3D_PHYD_CKGEN0 ++#define RG_SSUSB_RFIFO_IMPLAT_OFST (27) ++#define RG_SSUSB_TFIFO_PSEL_OFST (24) ++#define RG_SSUSB_CKGEN_PSEL_OFST (8) ++#define RG_SSUSB_RXCK_INV_OFST (0) ++ ++//U3D_PHYD_MIX5 ++#define RG_SSUSB_PRB_SEL_OFST (16) ++#define RG_SSUSB_RXPLL_STBCYC_OFST (0) ++ ++//U3D_PHYD_RESERVED ++#define RG_SSUSB_PHYD_RESERVE_OFST (0) ++//#define RG_SSUSB_RX_SIGDET_SEL_OFST (11) ++//#define RG_SSUSB_RX_SIGDET_EN_OFST (12) ++//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST (9) ++//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST (10) ++ ++//U3D_PHYD_CDR0 ++#define RG_SSUSB_CDR_BIC_LTR_OFST (28) ++#define RG_SSUSB_CDR_BIC_LTD0_OFST (24) ++#define RG_SSUSB_CDR_BC_LTD1_OFST (16) ++#define RG_SSUSB_CDR_BC_LTR_OFST (8) ++#define RG_SSUSB_CDR_BC_LTD0_OFST (0) ++ ++//U3D_PHYD_CDR1 ++#define RG_SSUSB_CDR_BIR_LTD1_OFST (24) ++#define RG_SSUSB_CDR_BIR_LTR_OFST (16) ++#define RG_SSUSB_CDR_BIR_LTD0_OFST (8) ++#define RG_SSUSB_CDR_BW_SEL_OFST (6) ++#define RG_SSUSB_CDR_BIC_LTD1_OFST (0) ++ ++//U3D_PHYD_PLL_0 ++#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST (28) ++#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST (27) ++#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST (26) ++#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST (25) ++#define RG_SSUSB_P_EQ_T_SEL_OFST (15) ++#define RG_SSUSB_PLL_ISO_EN_CYC_OFST (5) ++#define RG_SSUSB_PLLBAND_RECAL_OFST (4) ++#define RG_SSUSB_PLL_DDS_ISO_EN_OFST (3) ++#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST (2) ++#define RG_SSUSB_PLL_DDS_PWR_ON_OFST (1) ++#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST (0) ++ ++//U3D_PHYD_PLL_1 ++#define RG_SSUSB_CDR_BAND_5G_OFST (24) ++#define RG_SSUSB_CDR_BAND_2P5G_OFST (16) ++#define RG_SSUSB_PLL_BAND_5G_OFST (8) ++#define RG_SSUSB_PLL_BAND_2P5G_OFST (0) ++ ++//U3D_PHYD_BCN_DET_1 ++#define RG_SSUSB_P_BCN_OBS_PRD_OFST (16) ++#define RG_SSUSB_U_BCN_OBS_PRD_OFST (0) ++ ++//U3D_PHYD_BCN_DET_2 ++#define RG_SSUSB_P_BCN_OBS_SEL_OFST (16) ++#define RG_SSUSB_BCN_DET_DIS_OFST (12) ++#define RG_SSUSB_U_BCN_OBS_SEL_OFST (0) ++ ++//U3D_EQ0 ++#define RG_SSUSB_EQ_DLHL_LFI_OFST (24) ++#define RG_SSUSB_EQ_DHHL_LFI_OFST (16) ++#define RG_SSUSB_EQ_DD0HOS_LFI_OFST (8) ++#define RG_SSUSB_EQ_DD0LOS_LFI_OFST (0) ++ ++//U3D_EQ1 ++#define RG_SSUSB_EQ_DD1HOS_LFI_OFST (24) ++#define RG_SSUSB_EQ_DD1LOS_LFI_OFST (16) ++#define RG_SSUSB_EQ_DE0OS_LFI_OFST (8) ++#define RG_SSUSB_EQ_DE1OS_LFI_OFST (0) ++ ++//U3D_EQ2 ++#define RG_SSUSB_EQ_DLHLOS_LFI_OFST (24) ++#define RG_SSUSB_EQ_DHHLOS_LFI_OFST (16) ++#define RG_SSUSB_EQ_STOPTIME_OFST (14) ++#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST (11) ++#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST (8) ++#define RG_SSUSB_EQ_STARTTIME_OFST (6) ++#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST (3) ++#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST (0) ++ ++//U3D_EQ3 ++#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST (28) ++#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST (24) ++#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST (16) ++#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST (8) ++#define RG_SSUSB_EQ_TRI_DET_EN_OFST (7) ++#define RG_SSUSB_EQ_TRI_DET_TH_OFST (0) ++ ++//U3D_EQ_EYE0 ++#define RG_SSUSB_EQ_EYE_XOFFSET_OFST (25) ++#define RG_SSUSB_EQ_EYE_MON_EN_OFST (24) ++#define RG_SSUSB_EQ_EYE0_Y_OFST (16) ++#define RG_SSUSB_EQ_EYE1_Y_OFST (8) ++#define RG_SSUSB_EQ_PILPO_ROUT_OFST (7) ++#define RG_SSUSB_EQ_PI_KPGAIN_OFST (4) ++#define RG_SSUSB_EQ_EYE_CNT_EN_OFST (3) ++ ++//U3D_EQ_EYE1 ++#define RG_SSUSB_EQ_SIGDET_OFST (24) ++#define RG_SSUSB_EQ_EYE_MASK_OFST (7) ++ ++//U3D_EQ_EYE2 ++#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST (31) ++#define RG_SSUSB_EQ_SD_CNT1_OFST (24) ++#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST (22) ++#define RG_SSUSB_EQ_SD_CNT0_OFST (16) ++ ++//U3D_EQ_DFE0 ++#define RG_SSUSB_EQ_LEQMAX_OFST (28) ++#define RG_SSUSB_EQ_DFEX_EN_OFST (27) ++#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST (24) ++#define RG_SSUSB_EQ_CHK_EYE_H_OFST (23) ++#define RG_SSUSB_EQ_PIEYE_INI_OFST (16) ++#define RG_SSUSB_EQ_PI90_INI_OFST (8) ++#define RG_SSUSB_EQ_PI0_INI_OFST (0) ++ ++//U3D_EQ_DFE1 ++#define RG_SSUSB_EQ_REV_OFST (16) ++#define RG_SSUSB_EQ_DFEYEN_DUR_OFST (12) ++#define RG_SSUSB_EQ_DFEXEN_DUR_OFST (8) ++#define RG_SSUSB_EQ_DFEX_RST_OFST (7) ++#define RG_SSUSB_EQ_GATED_RXD_B_OFST (6) ++#define RG_SSUSB_EQ_PI90CK_SEL_OFST (4) ++#define RG_SSUSB_EQ_DFEX_DIS_OFST (2) ++#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST (1) ++#define RG_SSUSB_EQ_DFEXEN_SEL_OFST (0) ++ ++//U3D_EQ_DFE2 ++#define RG_SSUSB_EQ_MON_SEL_OFST (24) ++#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST (16) ++#define RG_SSUSB_EQ_DLEQOS_LFI_OFST (8) ++#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST (0) ++ ++//U3D_EQ_DFE3 ++#define RG_SSUSB_EQ_RESERVED_OFST (0) ++ ++//U3D_PHYD_MON0 ++#define RGS_SSUSB_BERT_BERC_OFST (16) ++#define RGS_SSUSB_LFPS_OFST (12) ++#define RGS_SSUSB_TRAINDEC_OFST (8) ++#define RGS_SSUSB_SCP_PAT_OFST (0) ++ ++//U3D_PHYD_MON1 ++#define RGS_SSUSB_RX_FL_OUT_OFST (0) ++ ++//U3D_PHYD_MON2 ++#define RGS_SSUSB_T2RLB_ERRCNT_OFST (16) ++#define RGS_SSUSB_RETRACK_OFST (12) ++#define RGS_SSUSB_RXPLL_LOCK_OFST (10) ++#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST (9) ++#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST (8) ++#define RGS_SSUSB_PDNCTL_OFST (0) ++ ++//U3D_PHYD_MON3 ++#define RGS_SSUSB_TSEQ_ERRCNT_OFST (16) ++#define RGS_SSUSB_PRBS_ERRCNT_OFST (0) ++ ++//U3D_PHYD_MON4 ++#define RGS_SSUSB_RX_LSLOCK_CNT_OFST (24) ++#define RGS_SSUSB_SCP_DETCNT_OFST (16) ++#define RGS_SSUSB_TSEQ_DETCNT_OFST (0) ++ ++//U3D_PHYD_MON5 ++#define RGS_SSUSB_EBUFMSG_OFST (16) ++#define RGS_SSUSB_BERT_LOCK_OFST (15) ++#define RGS_SSUSB_SCP_DET_OFST (14) ++#define RGS_SSUSB_TSEQ_DET_OFST (13) ++#define RGS_SSUSB_EBUF_UDF_OFST (12) ++#define RGS_SSUSB_EBUF_OVF_OFST (11) ++#define RGS_SSUSB_PRBS_PASSTH_OFST (10) ++#define RGS_SSUSB_PRBS_PASS_OFST (9) ++#define RGS_SSUSB_PRBS_LOCK_OFST (8) ++#define RGS_SSUSB_T2RLB_ERR_OFST (6) ++#define RGS_SSUSB_T2RLB_PASSTH_OFST (5) ++#define RGS_SSUSB_T2RLB_PASS_OFST (4) ++#define RGS_SSUSB_T2RLB_LOCK_OFST (3) ++#define RGS_SSUSB_RX_IMPCAL_DONE_OFST (2) ++#define RGS_SSUSB_TX_IMPCAL_DONE_OFST (1) ++#define RGS_SSUSB_RXDETECTED_OFST (0) ++ ++//U3D_PHYD_MON6 ++#define RGS_SSUSB_SIGCAL_DONE_OFST (30) ++#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST (29) ++#define RGS_SSUSB_SIGCAL_OFFSET_OFST (24) ++#define RGS_SSUSB_RX_IMP_SEL_OFST (16) ++#define RGS_SSUSB_TX_IMP_SEL_OFST (8) ++#define RGS_SSUSB_TFIFO_MSG_OFST (4) ++#define RGS_SSUSB_RFIFO_MSG_OFST (0) ++ ++//U3D_PHYD_MON7 ++#define RGS_SSUSB_FT_OUT_OFST (8) ++#define RGS_SSUSB_PRB_OUT_OFST (0) ++ ++//U3D_PHYA_RX_MON0 ++#define RGS_SSUSB_EQ_DCLEQ_OFST (24) ++#define RGS_SSUSB_EQ_DCD0H_OFST (16) ++#define RGS_SSUSB_EQ_DCD0L_OFST (8) ++#define RGS_SSUSB_EQ_DCD1H_OFST (0) ++ ++//U3D_PHYA_RX_MON1 ++#define RGS_SSUSB_EQ_DCD1L_OFST (24) ++#define RGS_SSUSB_EQ_DCE0_OFST (16) ++#define RGS_SSUSB_EQ_DCE1_OFST (8) ++#define RGS_SSUSB_EQ_DCHHL_OFST (0) ++ ++//U3D_PHYA_RX_MON2 ++#define RGS_SSUSB_EQ_LEQ_STOP_OFST (31) ++#define RGS_SSUSB_EQ_DCLHL_OFST (24) ++#define RGS_SSUSB_EQ_STATUS_OFST (16) ++#define RGS_SSUSB_EQ_DCEYE0_OFST (8) ++#define RGS_SSUSB_EQ_DCEYE1_OFST (0) ++ ++//U3D_PHYA_RX_MON3 ++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST (0) ++ ++//U3D_PHYA_RX_MON4 ++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST (0) ++ ++//U3D_PHYA_RX_MON5 ++#define RGS_SSUSB_EQ_DCLEQOS_OFST (8) ++#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST (7) ++#define RGS_SSUSB_EQ_PILPO_OFST (0) ++ ++//U3D_PHYD_CPPAT2 ++#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST (16) ++#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST (8) ++#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST (0) ++ ++//U3D_EQ_EYE3 ++#define RG_SSUSB_EQ_LEQ_SHIFT_OFST (24) ++#define RG_SSUSB_EQ_EYE_CNT_OFST (0) ++ ++//U3D_KBAND_OUT ++#define RGS_SSUSB_CDR_BAND_5G_OFST (24) ++#define RGS_SSUSB_CDR_BAND_2P5G_OFST (16) ++#define RGS_SSUSB_PLL_BAND_5G_OFST (8) ++#define RGS_SSUSB_PLL_BAND_2P5G_OFST (0) ++ ++//U3D_KBAND_OUT1 ++#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST (24) ++#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST (16) ++#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST (8) ++#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST (0) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u3phyd_bank2_reg { ++ //0x0 ++ PHY_LE32 b2_phyd_top1; ++ PHY_LE32 b2_phyd_top2; ++ PHY_LE32 b2_phyd_top3; ++ PHY_LE32 b2_phyd_top4; ++ //0x10 ++ PHY_LE32 b2_phyd_top5; ++ PHY_LE32 b2_phyd_top6; ++ PHY_LE32 b2_phyd_top7; ++ PHY_LE32 b2_phyd_p_sigdet1; ++ //0x20 ++ PHY_LE32 b2_phyd_p_sigdet2; ++ PHY_LE32 b2_phyd_p_sigdet_cal1; ++ PHY_LE32 b2_phyd_rxdet1; ++ PHY_LE32 b2_phyd_rxdet2; ++ //0x30 ++ PHY_LE32 b2_phyd_misc0; ++ PHY_LE32 b2_phyd_misc2; ++ PHY_LE32 b2_phyd_misc3; ++ PHY_LE32 reserve0; ++ //0x40 ++ PHY_LE32 b2_rosc_0; ++ PHY_LE32 b2_rosc_1; ++ PHY_LE32 b2_rosc_2; ++ PHY_LE32 b2_rosc_3; ++ //0x50 ++ PHY_LE32 b2_rosc_4; ++ PHY_LE32 b2_rosc_5; ++ PHY_LE32 b2_rosc_6; ++ PHY_LE32 b2_rosc_7; ++ //0x60 ++ PHY_LE32 b2_rosc_8; ++ PHY_LE32 b2_rosc_9; ++ PHY_LE32 b2_rosc_a; ++ PHY_LE32 reserve1; ++ //0x70~0xd0 ++ PHY_LE32 reserve2[28]; ++ //0xe0 ++ PHY_LE32 phyd_version; ++ PHY_LE32 phyd_model; ++}; ++ ++//U3D_B2_PHYD_TOP1 ++#define RG_SSUSB_PCIE2_K_EMP (0xf<<28) //31:28 ++#define RG_SSUSB_PCIE2_K_FUL (0xf<<24) //27:24 ++#define RG_SSUSB_TX_EIDLE_LP_EN (0x1<<17) //17:17 ++#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN (0x1<<16) //16:16 ++#define RG_SSUSB_SIGDET_EN (0x1<<15) //15:15 ++#define RG_SSUSB_FORCE_SIGDET_EN (0x1<<14) //14:14 ++#define RG_SSUSB_CLKRX_EN (0x1<<13) //13:13 ++#define RG_SSUSB_FORCE_CLKRX_EN (0x1<<12) //12:12 ++#define RG_SSUSB_CLKTX_EN (0x1<<11) //11:11 ++#define RG_SSUSB_FORCE_CLKTX_EN (0x1<<10) //10:10 ++#define RG_SSUSB_CLK_REQ_N_I (0x1<<9) //9:9 ++#define RG_SSUSB_FORCE_CLK_REQ_N_I (0x1<<8) //8:8 ++#define RG_SSUSB_RATE (0x1<<6) //6:6 ++#define RG_SSUSB_FORCE_RATE (0x1<<5) //5:5 ++#define RG_SSUSB_PCIE_MODE_SEL (0x1<<4) //4:4 ++#define RG_SSUSB_FORCE_PCIE_MODE_SEL (0x1<<3) //3:3 ++#define RG_SSUSB_PHY_MODE (0x3<<1) //2:1 ++#define RG_SSUSB_FORCE_PHY_MODE (0x1<<0) //0:0 ++ ++//U3D_B2_PHYD_TOP2 ++#define RG_SSUSB_FORCE_IDRV_6DB (0x1<<30) //30:30 ++#define RG_SSUSB_IDRV_6DB (0x3f<<24) //29:24 ++#define RG_SSUSB_FORCE_IDEM_3P5DB (0x1<<22) //22:22 ++#define RG_SSUSB_IDEM_3P5DB (0x3f<<16) //21:16 ++#define RG_SSUSB_FORCE_IDRV_3P5DB (0x1<<14) //14:14 ++#define RG_SSUSB_IDRV_3P5DB (0x3f<<8) //13:8 ++#define RG_SSUSB_FORCE_IDRV_0DB (0x1<<6) //6:6 ++#define RG_SSUSB_IDRV_0DB (0x3f<<0) //5:0 ++ ++//U3D_B2_PHYD_TOP3 ++#define RG_SSUSB_TX_BIASI (0x7<<25) //27:25 ++#define RG_SSUSB_FORCE_TX_BIASI_EN (0x1<<24) //24:24 ++#define RG_SSUSB_TX_BIASI_EN (0x1<<16) //16:16 ++#define RG_SSUSB_FORCE_TX_BIASI (0x1<<13) //13:13 ++#define RG_SSUSB_FORCE_IDEM_6DB (0x1<<8) //8:8 ++#define RG_SSUSB_IDEM_6DB (0x3f<<0) //5:0 ++ ++//U3D_B2_PHYD_TOP4 ++#define RG_SSUSB_G1_CDR_BIC_LTR (0xf<<28) //31:28 ++#define RG_SSUSB_G1_CDR_BIC_LTD0 (0xf<<24) //27:24 ++#define RG_SSUSB_G1_CDR_BC_LTD1 (0x1f<<16) //20:16 ++#define RG_SSUSB_G1_CDR_BC_LTR (0x1f<<8) //12:8 ++#define RG_SSUSB_G1_CDR_BC_LTD0 (0x1f<<0) //4:0 ++ ++//U3D_B2_PHYD_TOP5 ++#define RG_SSUSB_G1_CDR_BIR_LTD1 (0x1f<<24) //28:24 ++#define RG_SSUSB_G1_CDR_BIR_LTR (0x1f<<16) //20:16 ++#define RG_SSUSB_G1_CDR_BIR_LTD0 (0x1f<<8) //12:8 ++#define RG_SSUSB_G1_CDR_BIC_LTD1 (0xf<<0) //3:0 ++ ++//U3D_B2_PHYD_TOP6 ++#define RG_SSUSB_G2_CDR_BIC_LTR (0xf<<28) //31:28 ++#define RG_SSUSB_G2_CDR_BIC_LTD0 (0xf<<24) //27:24 ++#define RG_SSUSB_G2_CDR_BC_LTD1 (0x1f<<16) //20:16 ++#define RG_SSUSB_G2_CDR_BC_LTR (0x1f<<8) //12:8 ++#define RG_SSUSB_G2_CDR_BC_LTD0 (0x1f<<0) //4:0 ++ ++//U3D_B2_PHYD_TOP7 ++#define RG_SSUSB_G2_CDR_BIR_LTD1 (0x1f<<24) //28:24 ++#define RG_SSUSB_G2_CDR_BIR_LTR (0x1f<<16) //20:16 ++#define RG_SSUSB_G2_CDR_BIR_LTD0 (0x1f<<8) //12:8 ++#define RG_SSUSB_G2_CDR_BIC_LTD1 (0xf<<0) //3:0 ++ ++//U3D_B2_PHYD_P_SIGDET1 ++#define RG_SSUSB_P_SIGDET_FLT_DIS (0x1<<31) //31:31 ++#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL (0x7f<<24) //30:24 ++#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL (0x7f<<16) //22:16 ++#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL (0x7f<<8) //14:8 ++#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL (0x7f<<0) //6:0 ++ ++//U3D_B2_PHYD_P_SIGDET2 ++#define RG_SSUSB_P_SIGDET_RX_VAL_S (0x1<<29) //29:29 ++#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL (0x1<<28) //28:28 ++#define RG_SSUSB_P_SIGDET_L0_EXIT_S (0x1<<27) //27:27 ++#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S (0x3<<25) //26:25 ++#define RG_SSUSB_P_SIGDET_L0S_EXIT_S (0x1<<24) //24:24 ++#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S (0x1<<16) //16:16 ++#define RG_SSUSB_P_SIGDET_PRB_SEL (0x1<<10) //10:10 ++#define RG_SSUSB_P_SIGDET_BK_SIG_T (0x3<<8) //9:8 ++#define RG_SSUSB_P_SIGDET_P2_RXLFPS (0x1<<6) //6:6 ++#define RG_SSUSB_P_SIGDET_NON_BK_AD (0x1<<5) //5:5 ++#define RG_SSUSB_P_SIGDET_BK_B_RXEQ (0x1<<4) //4:4 ++#define RG_SSUSB_P_SIGDET_G2_KO_SEL (0x3<<2) //3:2 ++#define RG_SSUSB_P_SIGDET_G1_KO_SEL (0x3<<0) //1:0 ++ ++//U3D_B2_PHYD_P_SIGDET_CAL1 ++#define RG_SSUSB_P_SIGDET_CAL_OFFSET (0x1f<<24) //28:24 ++#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET (0x1<<16) //16:16 ++#define RG_SSUSB_P_SIGDET_CAL_EN (0x1<<8) //8:8 ++#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN (0x1<<3) //3:3 ++#define RG_SSUSB_P_SIGDET_FLT_EN (0x1<<2) //2:2 ++#define RG_SSUSB_P_SIGDET_SAMPLE_PRD (0x1<<1) //1:1 ++#define RG_SSUSB_P_SIGDET_REK (0x1<<0) //0:0 ++ ++//U3D_B2_PHYD_RXDET1 ++#define RG_SSUSB_RXDET_PRB_SEL (0x1<<31) //31:31 ++#define RG_SSUSB_FORCE_CMDET (0x1<<30) //30:30 ++#define RG_SSUSB_RXDET_EN (0x1<<29) //29:29 ++#define RG_SSUSB_FORCE_RXDET_EN (0x1<<28) //28:28 ++#define RG_SSUSB_RXDET_K_TWICE (0x1<<27) //27:27 ++#define RG_SSUSB_RXDET_STB3_SET (0x1ff<<18) //26:18 ++#define RG_SSUSB_RXDET_STB2_SET (0x1ff<<9) //17:9 ++#define RG_SSUSB_RXDET_STB1_SET (0x1ff<<0) //8:0 ++ ++//U3D_B2_PHYD_RXDET2 ++#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN (0x1<<31) //31:31 ++#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN (0x1<<30) //30:30 ++#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN (0x1<<29) //29:29 ++#define RG_SSUSB_PDN_T_SEL (0x3<<18) //19:18 ++#define RG_SSUSB_RXDET_STB3_SET_P3 (0x1ff<<9) //17:9 ++#define RG_SSUSB_RXDET_STB2_SET_P3 (0x1ff<<0) //8:0 ++ ++//U3D_B2_PHYD_MISC0 ++#define RG_SSUSB_FORCE_PLL_DDS_HF_EN (0x1<<22) //22:22 ++#define RG_SSUSB_PLL_DDS_HF_EN_MAN (0x1<<21) //21:21 ++#define RG_SSUSB_RXLFPS_ENTXDRV (0x1<<20) //20:20 ++#define RG_SSUSB_RX_FL_UNLOCKTH (0xf<<16) //19:16 ++#define RG_SSUSB_LFPS_PSEL (0x1<<15) //15:15 ++#define RG_SSUSB_RX_SIGDET_EN (0x1<<14) //14:14 ++#define RG_SSUSB_RX_SIGDET_EN_SEL (0x1<<13) //13:13 ++#define RG_SSUSB_RX_PI_CAL_EN (0x1<<12) //12:12 ++#define RG_SSUSB_RX_PI_CAL_EN_SEL (0x1<<11) //11:11 ++#define RG_SSUSB_P3_CLS_CK_SEL (0x1<<10) //10:10 ++#define RG_SSUSB_T2RLB_PSEL (0x3<<8) //9:8 ++#define RG_SSUSB_PPCTL_PSEL (0x7<<5) //7:5 ++#define RG_SSUSB_PHYD_TX_DATA_INV (0x1<<4) //4:4 ++#define RG_SSUSB_BERTLB_PSEL (0x3<<2) //3:2 ++#define RG_SSUSB_RETRACK_DIS (0x1<<1) //1:1 ++#define RG_SSUSB_PPERRCNT_CLR (0x1<<0) //0:0 ++ ++//U3D_B2_PHYD_MISC2 ++#define RG_SSUSB_FRC_PLL_DDS_PREDIV2 (0x1<<31) //31:31 ++#define RG_SSUSB_FRC_PLL_DDS_IADJ (0xf<<27) //30:27 ++#define RG_SSUSB_P_SIGDET_125FILTER (0x1<<26) //26:26 ++#define RG_SSUSB_P_SIGDET_RST_FILTER (0x1<<25) //25:25 ++#define RG_SSUSB_P_SIGDET_EID_USE_RAW (0x1<<24) //24:24 ++#define RG_SSUSB_P_SIGDET_LTD_USE_RAW (0x1<<23) //23:23 ++#define RG_SSUSB_EIDLE_BF_RXDET (0x1<<22) //22:22 ++#define RG_SSUSB_EIDLE_LP_STBCYC (0x1ff<<13) //21:13 ++#define RG_SSUSB_TX_EIDLE_LP_POSTDLY (0x3f<<7) //12:7 ++#define RG_SSUSB_TX_EIDLE_LP_PREDLY (0x3f<<1) //6:1 ++#define RG_SSUSB_TX_EIDLE_LP_EN_ADV (0x1<<0) //0:0 ++ ++//U3D_B2_PHYD_MISC3 ++#define RGS_SSUSB_DDS_CALIB_C_STATE (0x7<<16) //18:16 ++#define RGS_SSUSB_PPERRCNT (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_0 ++#define RG_SSUSB_RING_OSC_CNTEND (0x1ff<<23) //31:23 ++#define RG_SSUSB_XTAL_OSC_CNTEND (0x7f<<16) //22:16 ++#define RG_SSUSB_RING_OSC_EN (0x1<<3) //3:3 ++#define RG_SSUSB_RING_OSC_FORCE_EN (0x1<<2) //2:2 ++#define RG_SSUSB_FRC_RING_BYPASS_DET (0x1<<1) //1:1 ++#define RG_SSUSB_RING_BYPASS_DET (0x1<<0) //0:0 ++ ++//U3D_B2_ROSC_1 ++#define RG_SSUSB_RING_OSC_FRC_P3 (0x1<<20) //20:20 ++#define RG_SSUSB_RING_OSC_P3 (0x1<<19) //19:19 ++#define RG_SSUSB_RING_OSC_FRC_RECAL (0x3<<17) //18:17 ++#define RG_SSUSB_RING_OSC_RECAL (0x1<<16) //16:16 ++#define RG_SSUSB_RING_OSC_SEL (0xff<<8) //15:8 ++#define RG_SSUSB_RING_OSC_FRC_SEL (0x1<<0) //0:0 ++ ++//U3D_B2_ROSC_2 ++#define RG_SSUSB_RING_DET_STRCYC2 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_STRCYC1 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_3 ++#define RG_SSUSB_RING_DET_DETWIN1 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_STRCYC3 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_4 ++#define RG_SSUSB_RING_DET_DETWIN3 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_DETWIN2 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_5 ++#define RG_SSUSB_RING_DET_LBOND1 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_UBOND1 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_6 ++#define RG_SSUSB_RING_DET_LBOND2 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_UBOND2 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_7 ++#define RG_SSUSB_RING_DET_LBOND3 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_UBOND3 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_8 ++#define RG_SSUSB_RING_RESERVE (0xffff<<16) //31:16 ++#define RG_SSUSB_ROSC_PROB_SEL (0xf<<2) //5:2 ++#define RG_SSUSB_RING_FREQMETER_EN (0x1<<1) //1:1 ++#define RG_SSUSB_RING_DET_BPS_UBOND (0x1<<0) //0:0 ++ ++//U3D_B2_ROSC_9 ++#define RGS_FM_RING_CNT (0xffff<<16) //31:16 ++#define RGS_SSUSB_RING_OSC_STATE (0x3<<10) //11:10 ++#define RGS_SSUSB_RING_OSC_STABLE (0x1<<9) //9:9 ++#define RGS_SSUSB_RING_OSC_CAL_FAIL (0x1<<8) //8:8 ++#define RGS_SSUSB_RING_OSC_CAL (0xff<<0) //7:0 ++ ++//U3D_B2_ROSC_A ++#define RGS_SSUSB_ROSC_PROB_OUT (0xff<<0) //7:0 ++ ++//U3D_PHYD_VERSION ++#define RGS_SSUSB_PHYD_VERSION (0xffffffff<<0) //31:0 ++ ++//U3D_PHYD_MODEL ++#define RGS_SSUSB_PHYD_MODEL (0xffffffff<<0) //31:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_B2_PHYD_TOP1 ++#define RG_SSUSB_PCIE2_K_EMP_OFST (28) ++#define RG_SSUSB_PCIE2_K_FUL_OFST (24) ++#define RG_SSUSB_TX_EIDLE_LP_EN_OFST (17) ++#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST (16) ++#define RG_SSUSB_SIGDET_EN_OFST (15) ++#define RG_SSUSB_FORCE_SIGDET_EN_OFST (14) ++#define RG_SSUSB_CLKRX_EN_OFST (13) ++#define RG_SSUSB_FORCE_CLKRX_EN_OFST (12) ++#define RG_SSUSB_CLKTX_EN_OFST (11) ++#define RG_SSUSB_FORCE_CLKTX_EN_OFST (10) ++#define RG_SSUSB_CLK_REQ_N_I_OFST (9) ++#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST (8) ++#define RG_SSUSB_RATE_OFST (6) ++#define RG_SSUSB_FORCE_RATE_OFST (5) ++#define RG_SSUSB_PCIE_MODE_SEL_OFST (4) ++#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST (3) ++#define RG_SSUSB_PHY_MODE_OFST (1) ++#define RG_SSUSB_FORCE_PHY_MODE_OFST (0) ++ ++//U3D_B2_PHYD_TOP2 ++#define RG_SSUSB_FORCE_IDRV_6DB_OFST (30) ++#define RG_SSUSB_IDRV_6DB_OFST (24) ++#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST (22) ++#define RG_SSUSB_IDEM_3P5DB_OFST (16) ++#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST (14) ++#define RG_SSUSB_IDRV_3P5DB_OFST (8) ++#define RG_SSUSB_FORCE_IDRV_0DB_OFST (6) ++#define RG_SSUSB_IDRV_0DB_OFST (0) ++ ++//U3D_B2_PHYD_TOP3 ++#define RG_SSUSB_TX_BIASI_OFST (25) ++#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST (24) ++#define RG_SSUSB_TX_BIASI_EN_OFST (16) ++#define RG_SSUSB_FORCE_TX_BIASI_OFST (13) ++#define RG_SSUSB_FORCE_IDEM_6DB_OFST (8) ++#define RG_SSUSB_IDEM_6DB_OFST (0) ++ ++//U3D_B2_PHYD_TOP4 ++#define RG_SSUSB_G1_CDR_BIC_LTR_OFST (28) ++#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST (24) ++#define RG_SSUSB_G1_CDR_BC_LTD1_OFST (16) ++#define RG_SSUSB_G1_CDR_BC_LTR_OFST (8) ++#define RG_SSUSB_G1_CDR_BC_LTD0_OFST (0) ++ ++//U3D_B2_PHYD_TOP5 ++#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST (24) ++#define RG_SSUSB_G1_CDR_BIR_LTR_OFST (16) ++#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST (8) ++#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST (0) ++ ++//U3D_B2_PHYD_TOP6 ++#define RG_SSUSB_G2_CDR_BIC_LTR_OFST (28) ++#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST (24) ++#define RG_SSUSB_G2_CDR_BC_LTD1_OFST (16) ++#define RG_SSUSB_G2_CDR_BC_LTR_OFST (8) ++#define RG_SSUSB_G2_CDR_BC_LTD0_OFST (0) ++ ++//U3D_B2_PHYD_TOP7 ++#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST (24) ++#define RG_SSUSB_G2_CDR_BIR_LTR_OFST (16) ++#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST (8) ++#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST (0) ++ ++//U3D_B2_PHYD_P_SIGDET1 ++#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST (31) ++#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST (24) ++#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST (16) ++#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST (8) ++#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST (0) ++ ++//U3D_B2_PHYD_P_SIGDET2 ++#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST (29) ++#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST (28) ++#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST (27) ++#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST (25) ++#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST (24) ++#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST (16) ++#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST (10) ++#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST (8) ++#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST (6) ++#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST (5) ++#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST (4) ++#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST (2) ++#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST (0) ++ ++//U3D_B2_PHYD_P_SIGDET_CAL1 ++#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST (24) ++#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST (16) ++#define RG_SSUSB_P_SIGDET_CAL_EN_OFST (8) ++#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST (3) ++#define RG_SSUSB_P_SIGDET_FLT_EN_OFST (2) ++#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST (1) ++#define RG_SSUSB_P_SIGDET_REK_OFST (0) ++ ++//U3D_B2_PHYD_RXDET1 ++#define RG_SSUSB_RXDET_PRB_SEL_OFST (31) ++#define RG_SSUSB_FORCE_CMDET_OFST (30) ++#define RG_SSUSB_RXDET_EN_OFST (29) ++#define RG_SSUSB_FORCE_RXDET_EN_OFST (28) ++#define RG_SSUSB_RXDET_K_TWICE_OFST (27) ++#define RG_SSUSB_RXDET_STB3_SET_OFST (18) ++#define RG_SSUSB_RXDET_STB2_SET_OFST (9) ++#define RG_SSUSB_RXDET_STB1_SET_OFST (0) ++ ++//U3D_B2_PHYD_RXDET2 ++#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST (31) ++#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST (30) ++#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST (29) ++#define RG_SSUSB_PDN_T_SEL_OFST (18) ++#define RG_SSUSB_RXDET_STB3_SET_P3_OFST (9) ++#define RG_SSUSB_RXDET_STB2_SET_P3_OFST (0) ++ ++//U3D_B2_PHYD_MISC0 ++#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST (22) ++#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST (21) ++#define RG_SSUSB_RXLFPS_ENTXDRV_OFST (20) ++#define RG_SSUSB_RX_FL_UNLOCKTH_OFST (16) ++#define RG_SSUSB_LFPS_PSEL_OFST (15) ++#define RG_SSUSB_RX_SIGDET_EN_OFST (14) ++#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST (13) ++#define RG_SSUSB_RX_PI_CAL_EN_OFST (12) ++#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST (11) ++#define RG_SSUSB_P3_CLS_CK_SEL_OFST (10) ++#define RG_SSUSB_T2RLB_PSEL_OFST (8) ++#define RG_SSUSB_PPCTL_PSEL_OFST (5) ++#define RG_SSUSB_PHYD_TX_DATA_INV_OFST (4) ++#define RG_SSUSB_BERTLB_PSEL_OFST (2) ++#define RG_SSUSB_RETRACK_DIS_OFST (1) ++#define RG_SSUSB_PPERRCNT_CLR_OFST (0) ++ ++//U3D_B2_PHYD_MISC2 ++#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST (31) ++#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST (27) ++#define RG_SSUSB_P_SIGDET_125FILTER_OFST (26) ++#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST (25) ++#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST (24) ++#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST (23) ++#define RG_SSUSB_EIDLE_BF_RXDET_OFST (22) ++#define RG_SSUSB_EIDLE_LP_STBCYC_OFST (13) ++#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST (7) ++#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST (1) ++#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST (0) ++ ++//U3D_B2_PHYD_MISC3 ++#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST (16) ++#define RGS_SSUSB_PPERRCNT_OFST (0) ++ ++//U3D_B2_ROSC_0 ++#define RG_SSUSB_RING_OSC_CNTEND_OFST (23) ++#define RG_SSUSB_XTAL_OSC_CNTEND_OFST (16) ++#define RG_SSUSB_RING_OSC_EN_OFST (3) ++#define RG_SSUSB_RING_OSC_FORCE_EN_OFST (2) ++#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST (1) ++#define RG_SSUSB_RING_BYPASS_DET_OFST (0) ++ ++//U3D_B2_ROSC_1 ++#define RG_SSUSB_RING_OSC_FRC_P3_OFST (20) ++#define RG_SSUSB_RING_OSC_P3_OFST (19) ++#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST (17) ++#define RG_SSUSB_RING_OSC_RECAL_OFST (16) ++#define RG_SSUSB_RING_OSC_SEL_OFST (8) ++#define RG_SSUSB_RING_OSC_FRC_SEL_OFST (0) ++ ++//U3D_B2_ROSC_2 ++#define RG_SSUSB_RING_DET_STRCYC2_OFST (16) ++#define RG_SSUSB_RING_DET_STRCYC1_OFST (0) ++ ++//U3D_B2_ROSC_3 ++#define RG_SSUSB_RING_DET_DETWIN1_OFST (16) ++#define RG_SSUSB_RING_DET_STRCYC3_OFST (0) ++ ++//U3D_B2_ROSC_4 ++#define RG_SSUSB_RING_DET_DETWIN3_OFST (16) ++#define RG_SSUSB_RING_DET_DETWIN2_OFST (0) ++ ++//U3D_B2_ROSC_5 ++#define RG_SSUSB_RING_DET_LBOND1_OFST (16) ++#define RG_SSUSB_RING_DET_UBOND1_OFST (0) ++ ++//U3D_B2_ROSC_6 ++#define RG_SSUSB_RING_DET_LBOND2_OFST (16) ++#define RG_SSUSB_RING_DET_UBOND2_OFST (0) ++ ++//U3D_B2_ROSC_7 ++#define RG_SSUSB_RING_DET_LBOND3_OFST (16) ++#define RG_SSUSB_RING_DET_UBOND3_OFST (0) ++ ++//U3D_B2_ROSC_8 ++#define RG_SSUSB_RING_RESERVE_OFST (16) ++#define RG_SSUSB_ROSC_PROB_SEL_OFST (2) ++#define RG_SSUSB_RING_FREQMETER_EN_OFST (1) ++#define RG_SSUSB_RING_DET_BPS_UBOND_OFST (0) ++ ++//U3D_B2_ROSC_9 ++#define RGS_FM_RING_CNT_OFST (16) ++#define RGS_SSUSB_RING_OSC_STATE_OFST (10) ++#define RGS_SSUSB_RING_OSC_STABLE_OFST (9) ++#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST (8) ++#define RGS_SSUSB_RING_OSC_CAL_OFST (0) ++ ++//U3D_B2_ROSC_A ++#define RGS_SSUSB_ROSC_PROB_OUT_OFST (0) ++ ++//U3D_PHYD_VERSION ++#define RGS_SSUSB_PHYD_VERSION_OFST (0) ++ ++//U3D_PHYD_MODEL ++#define RGS_SSUSB_PHYD_MODEL_OFST (0) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct sifslv_chip_reg { ++ PHY_LE32 xtalbias; ++ PHY_LE32 syspll1; ++ PHY_LE32 gpio_ctla; ++ PHY_LE32 gpio_ctlb; ++ PHY_LE32 gpio_ctlc; ++}; ++ ++//U3D_GPIO_CTLA ++#define RG_C60802_GPIO_CTLA (0xffffffff<<0) //31:0 ++ ++//U3D_GPIO_CTLB ++#define RG_C60802_GPIO_CTLB (0xffffffff<<0) //31:0 ++ ++//U3D_GPIO_CTLC ++#define RG_C60802_GPIO_CTLC (0xffffffff<<0) //31:0 ++ ++/* OFFSET */ ++ ++//U3D_GPIO_CTLA ++#define RG_C60802_GPIO_CTLA_OFST (0) ++ ++//U3D_GPIO_CTLB ++#define RG_C60802_GPIO_CTLB_OFST (0) ++ ++//U3D_GPIO_CTLC ++#define RG_C60802_GPIO_CTLC_OFST (0) ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct sifslv_fm_feg { ++ //0x0 ++ PHY_LE32 fmcr0; ++ PHY_LE32 fmcr1; ++ PHY_LE32 fmcr2; ++ PHY_LE32 fmmonr0; ++ //0x10 ++ PHY_LE32 fmmonr1; ++}; ++ ++//U3D_FMCR0 ++#define RG_LOCKTH (0xf<<28) //31:28 ++#define RG_MONCLK_SEL (0x3<<26) //27:26 ++#define RG_FM_MODE (0x1<<25) //25:25 ++#define RG_FREQDET_EN (0x1<<24) //24:24 ++#define RG_CYCLECNT (0xffffff<<0) //23:0 ++ ++//U3D_FMCR1 ++#define RG_TARGET (0xffffffff<<0) //31:0 ++ ++//U3D_FMCR2 ++#define RG_OFFSET (0xffffffff<<0) //31:0 ++ ++//U3D_FMMONR0 ++#define USB_FM_OUT (0xffffffff<<0) //31:0 ++ ++//U3D_FMMONR1 ++#define RG_MONCLK_SEL_3 (0x1<<9) //9:9 ++#define RG_FRCK_EN (0x1<<8) //8:8 ++#define USBPLL_LOCK (0x1<<1) //1:1 ++#define USB_FM_VLD (0x1<<0) //0:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_FMCR0 ++#define RG_LOCKTH_OFST (28) ++#define RG_MONCLK_SEL_OFST (26) ++#define RG_FM_MODE_OFST (25) ++#define RG_FREQDET_EN_OFST (24) ++#define RG_CYCLECNT_OFST (0) ++ ++//U3D_FMCR1 ++#define RG_TARGET_OFST (0) ++ ++//U3D_FMCR2 ++#define RG_OFFSET_OFST (0) ++ ++//U3D_FMMONR0 ++#define USB_FM_OUT_OFST (0) ++ ++//U3D_FMMONR1 ++#define RG_MONCLK_SEL_3_OFST (9) ++#define RG_FRCK_EN_OFST (8) ++#define USBPLL_LOCK_OFST (1) ++#define USB_FM_VLD_OFST (0) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++PHY_INT32 phy_init(struct u3phy_info *info); ++PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); ++PHY_INT32 eyescan_init(struct u3phy_info *info); ++PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y ++ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); ++PHY_INT32 u2_save_cur_en(struct u3phy_info *info); ++PHY_INT32 u2_save_cur_re(struct u3phy_info *info); ++PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info); ++ ++#endif ++#endif +diff --git a/drivers/usb/host/mtk-phy-ahb.c b/drivers/usb/host/mtk-phy-ahb.c +new file mode 100644 +index 0000000..ebaf7c8 +--- /dev/null ++++ b/drivers/usb/host/mtk-phy-ahb.c +@@ -0,0 +1,58 @@ ++#include "mtk-phy.h" ++#ifdef CONFIG_U3D_HAL_SUPPORT ++#include "mu3d_hal_osal.h" ++#endif ++ ++#ifdef CONFIG_U3_PHY_AHB_SUPPORT ++#include <linux/gfp.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++ ++#ifndef CONFIG_U3D_HAL_SUPPORT ++#define os_writel(addr,data) {\ ++ (*((volatile PHY_UINT32*)(addr)) = data);\ ++ } ++#define os_readl(addr) *((volatile PHY_UINT32*)(addr)) ++#define os_writelmsk(addr, data, msk) \ ++ { os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \ ++ } ++#define os_setmsk(addr, msk) \ ++ { os_writel(addr, os_readl(addr) | msk); \ ++ } ++#define os_clrmsk(addr, msk) \ ++ { os_writel(addr, os_readl(addr) &~ msk); \ ++ } ++/*msk the data first, then umsk with the umsk.*/ ++#define os_writelmskumsk(addr, data, msk, umsk) \ ++{\ ++ os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\ ++} ++ ++#endif ++ ++PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data) ++{ ++ os_writel(addr, data); ++ ++ return 0; ++} ++ ++PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr) ++{ ++ return os_readl(addr); ++} ++ ++PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data) ++{ ++ os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8)); ++ ++ return 0; ++} ++ ++PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr) ++{ ++ return ((os_readl(addr)>>((addr%4)*8))&0xff); ++} ++ ++#endif ++ +diff --git a/drivers/usb/host/mtk-phy.c b/drivers/usb/host/mtk-phy.c +new file mode 100644 +index 0000000..7ed8f01 +--- /dev/null ++++ b/drivers/usb/host/mtk-phy.c +@@ -0,0 +1,102 @@ ++#include <linux/gfp.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#define U3_PHY_LIB ++#include "mtk-phy.h" ++#ifdef CONFIG_PROJECT_7621 ++#include "mtk-phy-7621.h" ++#endif ++#ifdef CONFIG_PROJECT_PHY ++static struct u3phy_operator project_operators = { ++ .init = phy_init, ++ .change_pipe_phase = phy_change_pipe_phase, ++ .eyescan_init = eyescan_init, ++ .eyescan = phy_eyescan, ++ .u2_slew_rate_calibration = u2_slew_rate_calibration, ++}; ++#endif ++ ++ ++PHY_INT32 u3phy_init(){ ++#ifndef CONFIG_PROJECT_PHY ++ PHY_INT32 u3phy_version; ++#endif ++ ++ if(u3phy != NULL){ ++ return PHY_TRUE; ++ } ++ ++ u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO); ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO); ++#endif ++#ifdef CONFIG_U3_PHY_GPIO_SUPPORT ++ u3phy->phyd_version_addr = 0x2000e4; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ u3phy_p1->phyd_version_addr = 0x2000e4; ++#endif ++#else ++ u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4; ++#endif ++#endif ++ ++#ifdef CONFIG_PROJECT_PHY ++ ++ u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE; ++ u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE; ++ u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE; ++ u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE; ++ u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE; ++ u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE; ++ u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE; ++ u3phy_ops = &project_operators; ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1; ++ u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1; ++ u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1; ++ u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1; ++ u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1; ++ u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE; ++ u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE; ++#endif ++#endif ++ ++ return PHY_TRUE; ++} ++ ++PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){ ++ PHY_INT8 cur_value; ++ PHY_INT8 new_value; ++ ++ cur_value = U3PhyReadReg8(addr); ++ new_value = (cur_value & (~mask)) | (value << offset); ++ //udelay(i2cdelayus); ++ U3PhyWriteReg8(addr, new_value); ++ return PHY_TRUE; ++} ++ ++PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){ ++ PHY_INT32 cur_value; ++ PHY_INT32 new_value; ++ ++ cur_value = U3PhyReadReg32(addr); ++ new_value = (cur_value & (~mask)) | ((value << offset) & mask); ++ U3PhyWriteReg32(addr, new_value); ++ //DRV_MDELAY(100); ++ ++ return PHY_TRUE; ++} ++ ++PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){ ++ ++ return ((U3PhyReadReg8(addr) & mask) >> offset); ++} ++ ++PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){ ++ ++ return ((U3PhyReadReg32(addr) & mask) >> offset); ++} ++ +diff --git a/drivers/usb/host/mtk-phy.h b/drivers/usb/host/mtk-phy.h +new file mode 100644 +index 0000000..07ed410 +--- /dev/null ++++ b/drivers/usb/host/mtk-phy.h +@@ -0,0 +1,179 @@ ++#ifndef __MTK_PHY_NEW_H ++#define __MTK_PHY_NEW_H ++ ++//#define CONFIG_U3D_HAL_SUPPORT ++ ++/* include system library */ ++#include <linux/gfp.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#include <linux/delay.h> ++ ++/* Choose PHY R/W implementation */ ++//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO ++#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC ++ ++/* Choose PHY version */ ++//Select your project by defining one of the followings ++#define CONFIG_PROJECT_7621 //7621 ++#define CONFIG_PROJECT_PHY ++ ++/* BASE ADDRESS DEFINE, should define this on ASIC */ ++#define PHY_BASE 0xBE1D0000 ++#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100) ++#define SIFSLV_CHIP_BASE (PHY_BASE+0x700) ++#define U2_PHY_BASE (PHY_BASE+0x800) ++#define U3_PHYD_BASE (PHY_BASE+0x900) ++#define U3_PHYD_B2_BASE (PHY_BASE+0xa00) ++#define U3_PHYA_BASE (PHY_BASE+0xb00) ++#define U3_PHYA_DA_BASE (PHY_BASE+0xc00) ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100) ++#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700) ++#define U2_PHY_BASE_P1 (PHY_BASE+0x1000) ++#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100) ++#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200) ++#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300) ++#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400) ++#endif ++ ++/* ++ ++0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg ++0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc ++0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28 ++0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28 ++0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28 ++0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28 ++0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28 ++*/ ++ ++ ++/* TYPE DEFINE */ ++typedef unsigned int PHY_UINT32; ++typedef int PHY_INT32; ++typedef unsigned short PHY_UINT16; ++typedef short PHY_INT16; ++typedef unsigned char PHY_UINT8; ++typedef char PHY_INT8; ++ ++typedef PHY_UINT32 __bitwise PHY_LE32; ++ ++/* CONSTANT DEFINE */ ++#define PHY_FALSE 0 ++#define PHY_TRUE 1 ++ ++/* MACRO DEFINE */ ++#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data)) ++#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr)) ++ ++#define DRV_MDELAY mdelay ++#define DRV_MSLEEP msleep ++#define DRV_UDELAY udelay ++#define DRV_USLEEP usleep ++ ++/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */ ++PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data); ++PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr); ++PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data); ++PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr); ++ ++/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */ ++PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); ++PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); ++PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); ++PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); ++ ++struct u3phy_info { ++ PHY_INT32 phy_version; ++ PHY_INT32 phyd_version_addr; ++ ++#ifdef CONFIG_PROJECT_PHY ++ struct u2phy_reg *u2phy_regs; ++ struct u3phya_reg *u3phya_regs; ++ struct u3phya_da_reg *u3phya_da_regs; ++ struct u3phyd_reg *u3phyd_regs; ++ struct u3phyd_bank2_reg *u3phyd_bank2_regs; ++ struct sifslv_chip_reg *sifslv_chip_regs; ++ struct sifslv_fm_feg *sifslv_fm_regs; ++#endif ++}; ++ ++struct u3phy_operator { ++ PHY_INT32 (*init) (struct u3phy_info *info); ++ PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); ++ PHY_INT32 (*eyescan_init) (struct u3phy_info *info); ++ PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); ++ PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info); ++ PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info); ++ PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info); ++}; ++ ++#ifdef U3_PHY_LIB ++#define AUTOEXT ++#else ++#define AUTOEXT extern ++#endif ++ ++AUTOEXT struct u3phy_info *u3phy; ++AUTOEXT struct u3phy_info *u3phy_p1; ++AUTOEXT struct u3phy_operator *u3phy_ops; ++ ++/*********eye scan required*********/ ++ ++#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF)) ++#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8)) ++ ++typedef enum ++{ ++ SCAN_UP, ++ SCAN_DN ++} enumScanDir; ++ ++struct strucScanRegion ++{ ++ PHY_INT8 bX_tl; ++ PHY_INT8 bY_tl; ++ PHY_INT8 bX_br; ++ PHY_INT8 bY_br; ++ PHY_INT8 bDeltaX; ++ PHY_INT8 bDeltaY; ++}; ++ ++struct strucTestCycle ++{ ++ PHY_UINT16 wEyeCnt; ++ PHY_INT8 bNumOfEyeCnt; ++ PHY_INT8 bPICalEn; ++ PHY_INT8 bNumOfIgnoreCnt; ++}; ++ ++#define ERRCNT_MAX 128 ++#define CYCLE_COUNT_MAX 15 ++ ++/// the map resolution is 128 x 128 pts ++#define MAX_X 127 ++#define MAX_Y 127 ++#define MIN_X 0 ++#define MIN_Y 0 ++ ++PHY_INT32 u3phy_init(void); ++ ++AUTOEXT struct strucScanRegion _rEye1; ++AUTOEXT struct strucScanRegion _rEye2; ++AUTOEXT struct strucTestCycle _rTestCycle; ++AUTOEXT PHY_UINT8 _bXcurr; ++AUTOEXT PHY_UINT8 _bYcurr; ++AUTOEXT enumScanDir _eScanDir; ++AUTOEXT PHY_INT8 _fgXChged; ++AUTOEXT PHY_INT8 _bPIResult; ++/* use local variable instead to save memory use */ ++#if 0 ++AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; ++AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; ++#endif ++ ++/***********************************/ ++#endif ++ +diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h +index 638e88f..b945c3e 100644 +--- a/drivers/usb/host/pci-quirks.h ++++ b/drivers/usb/host/pci-quirks.h +@@ -1,7 +1,7 @@ + #ifndef __LINUX_USB_PCI_QUIRKS_H + #define __LINUX_USB_PCI_QUIRKS_H + +-#ifdef CONFIG_PCI ++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); + int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); + int usb_amd_find_chipset_info(void); +diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c +index eb009a4..b491120 100644 +--- a/drivers/usb/host/xhci-dbg.c ++++ b/drivers/usb/host/xhci-dbg.c +@@ -21,6 +21,9 @@ + */ + + #include "xhci.h" ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#include "xhci-mtk.h" ++#endif + + #define XHCI_INIT_VALUE 0x0 + +diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c +index bce4391..e156473 100644 +--- a/drivers/usb/host/xhci-mem.c ++++ b/drivers/usb/host/xhci-mem.c +@@ -67,6 +67,9 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci, + + static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg) + { ++ if (!seg) ++ return; ++ + if (seg->trbs) { + dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma); + seg->trbs = NULL; +@@ -1375,9 +1378,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, + max_burst = (usb_endpoint_maxp(&ep->desc) + & 0x1800) >> 11; + } ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc)) ++ max_packet += 2; ++#endif + break; + case USB_SPEED_FULL: + case USB_SPEED_LOW: ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc)) ++ max_packet += 2; ++#endif + break; + default: + BUG(); +diff --git a/drivers/usb/host/xhci-mtk-power.c b/drivers/usb/host/xhci-mtk-power.c +new file mode 100644 +index 0000000..09870fa +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk-power.c +@@ -0,0 +1,115 @@ ++#include "xhci-mtk.h" ++#include "xhci-mtk-power.h" ++#include "xhci.h" ++#include <linux/kernel.h> /* printk() */ ++#include <linux/slab.h> ++#include <linux/delay.h> ++ ++static int g_num_u3_port; ++static int g_num_u2_port; ++ ++ ++void enableXhciAllPortPower(struct xhci_hcd *xhci){ ++ int i; ++ u32 port_id, temp; ++ u32 __iomem *addr; ++ ++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); ++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); ++ ++ for(i=1; i<=g_num_u3_port; i++){ ++ port_id=i; ++ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff); ++ temp = readl(addr); ++ temp = xhci_port_state_to_neutral(temp); ++ temp |= PORT_POWER; ++ writel(temp, addr); ++ } ++ for(i=1; i<=g_num_u2_port; i++){ ++ port_id=i+g_num_u3_port; ++ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff); ++ temp = readl(addr); ++ temp = xhci_port_state_to_neutral(temp); ++ temp |= PORT_POWER; ++ writel(temp, addr); ++ } ++} ++ ++void enableAllClockPower(){ ++ ++ int i; ++ u32 temp; ++ ++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); ++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); ++ ++ //2. Enable xHC ++ writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL); ++ writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL); ++ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); ++ ++ //1. Enable target ports ++ for(i=0; i<g_num_u3_port; i++){ ++ temp = readl(SSUSB_U3_CTRL(i)); ++ temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS); ++ writel(temp, SSUSB_U3_CTRL(i)); ++ } ++ for(i=0; i<g_num_u2_port; i++){ ++ temp = readl(SSUSB_U2_CTRL(i)); ++ temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS); ++ writel(temp, SSUSB_U2_CTRL(i)); ++ } ++ msleep(100); ++} ++ ++ ++//(X)disable clock/power of a port ++//(X)if all ports are disabled, disable IP ctrl power ++//disable all ports and IP clock/power, this is just mention HW that the power/clock of port ++//and IP could be disable if suspended. ++//If doesn't not disable all ports at first, the IP clock/power will never be disabled ++//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time ++//port_index: port number ++//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed) ++void disablePortClockPower(void){ ++ int i; ++ u32 temp; ++ ++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); ++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); ++ ++ for(i=0; i<g_num_u3_port; i++){ ++ temp = readl(SSUSB_U3_CTRL(i)); ++ temp = temp | (SSUSB_U3_PORT_PDN); ++ writel(temp, SSUSB_U3_CTRL(i)); ++ } ++ for(i=0; i<g_num_u2_port; i++){ ++ temp = readl(SSUSB_U2_CTRL(i)); ++ temp = temp | (SSUSB_U2_PORT_PDN); ++ writel(temp, SSUSB_U2_CTRL(i)); ++ } ++ writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); ++} ++ ++//if IP ctrl power is disabled, enable it ++//enable clock/power of a port ++//port_index: port number ++//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed) ++void enablePortClockPower(int port_index, int port_rev){ ++ int i; ++ u32 temp; ++ ++ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); ++ ++ if(port_rev == 0x3){ ++ temp = readl(SSUSB_U3_CTRL(port_index)); ++ temp = temp & (~SSUSB_U3_PORT_PDN); ++ writel(temp, SSUSB_U3_CTRL(port_index)); ++ } ++ else if(port_rev == 0x2){ ++ temp = readl(SSUSB_U2_CTRL(port_index)); ++ temp = temp & (~SSUSB_U2_PORT_PDN); ++ writel(temp, SSUSB_U2_CTRL(port_index)); ++ } ++} ++ +diff --git a/drivers/usb/host/xhci-mtk-power.h b/drivers/usb/host/xhci-mtk-power.h +new file mode 100644 +index 0000000..e57c243 +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk-power.h +@@ -0,0 +1,13 @@ ++#ifndef _XHCI_MTK_POWER_H ++#define _XHCI_MTK_POWER_H ++ ++#include <linux/usb.h> ++#include "xhci.h" ++#include "xhci-mtk.h" ++ ++void enableXhciAllPortPower(struct xhci_hcd *xhci); ++void enableAllClockPower(void); ++void disablePortClockPower(void); ++void enablePortClockPower(int port_index, int port_rev); ++ ++#endif +diff --git a/drivers/usb/host/xhci-mtk-scheduler.c b/drivers/usb/host/xhci-mtk-scheduler.c +new file mode 100644 +index 0000000..bf6a8bd +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk-scheduler.c +@@ -0,0 +1,608 @@ ++#include "xhci-mtk-scheduler.h" ++#include <linux/kernel.h> /* printk() */ ++ ++static struct sch_ep **ss_out_eps[MAX_EP_NUM]; ++static struct sch_ep **ss_in_eps[MAX_EP_NUM]; ++static struct sch_ep **hs_eps[MAX_EP_NUM]; //including tt isoc ++static struct sch_ep **tt_intr_eps[MAX_EP_NUM]; ++ ++ ++int mtk_xhci_scheduler_init(void){ ++ int i; ++ ++ for(i=0; i<MAX_EP_NUM; i++){ ++ ss_out_eps[i] = NULL; ++ } ++ for(i=0; i<MAX_EP_NUM; i++){ ++ ss_in_eps[i] = NULL; ++ } ++ for(i=0; i<MAX_EP_NUM; i++){ ++ hs_eps[i] = NULL; ++ } ++ for(i=0; i<MAX_EP_NUM; i++){ ++ tt_intr_eps[i] = NULL; ++ } ++ return 0; ++} ++ ++int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst ++ , int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode ++ , int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){ ++ ++ struct sch_ep **ep_array; ++ int i; ++ ++ if(is_in && dev_speed == USB_SPEED_SUPER ){ ++ ep_array = (struct sch_ep **)ss_in_eps; ++ } ++ else if(dev_speed == USB_SPEED_SUPER){ ++ ep_array = (struct sch_ep **)ss_out_eps; ++ } ++ else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){ ++ ep_array = (struct sch_ep **)hs_eps; ++ } ++ else{ ++ ep_array = (struct sch_ep **)tt_intr_eps; ++ } ++ for(i=0; i<MAX_EP_NUM; i++){ ++ if(ep_array[i] == NULL){ ++ tmp_ep->dev_speed = dev_speed; ++ tmp_ep->isTT = isTT; ++ tmp_ep->is_in = is_in; ++ tmp_ep->ep_type = ep_type; ++ tmp_ep->maxp = maxp; ++ tmp_ep->interval = interval; ++ tmp_ep->burst = burst; ++ tmp_ep->mult = mult; ++ tmp_ep->offset = offset; ++ tmp_ep->repeat = repeat; ++ tmp_ep->pkts = pkts; ++ tmp_ep->cs_count = cs_count; ++ tmp_ep->burst_mode = burst_mode; ++ tmp_ep->bw_cost = bw_cost; ++ tmp_ep->ep = ep; ++ ep_array[i] = tmp_ep; ++ return SCH_SUCCESS; ++ } ++ } ++ return SCH_FAIL; ++} ++ ++int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat ++ , int td_size){ ++ int i, j, k; ++ int bw_required[3]; ++ int final_bw_required; ++ int bw_required_per_repeat; ++ int tmp_bw_required; ++ struct sch_ep *cur_sch_ep; ++ struct sch_ep **ep_array; ++ int cur_offset; ++ int cur_ep_offset; ++ int tmp_offset; ++ int tmp_interval; ++ int ep_offset; ++ int ep_interval; ++ int ep_repeat; ++ int ep_mult; ++ ++ if(is_in){ ++ ep_array = (struct sch_ep **)ss_in_eps; ++ } ++ else{ ++ ep_array = (struct sch_ep **)ss_out_eps; ++ } ++ ++ bw_required[0] = 0; ++ bw_required[1] = 0; ++ bw_required[2] = 0; ++ ++ if(repeat == 0){ ++ final_bw_required = 0; ++ for(i=0; i<MAX_EP_NUM; i++){ ++ cur_sch_ep = ep_array[i]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_interval = cur_sch_ep->interval; ++ ep_offset = cur_sch_ep->offset; ++ if(cur_sch_ep->repeat == 0){ ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + ep_interval - offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = offset + interval - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset % tmp_interval == 0){ ++ final_bw_required += cur_sch_ep->bw_cost; ++ } ++ } ++ else{ ++ ep_repeat = cur_sch_ep->repeat; ++ ep_mult = cur_sch_ep->mult; ++ for(k=0; k<=ep_mult; k++){ ++ cur_ep_offset = ep_offset+(k*ep_mult); ++ if(ep_interval >= interval){ ++ tmp_offset = cur_ep_offset + ep_interval - offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = offset + interval - cur_ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset % tmp_interval == 0){ ++ final_bw_required += cur_sch_ep->bw_cost; ++ break; ++ } ++ } ++ } ++ } ++ final_bw_required += td_size; ++ } ++ else{ ++ bw_required_per_repeat = maxp * (burst+1); ++ for(j=0; j<=mult; j++){ ++ tmp_bw_required = 0; ++ cur_offset = offset+(j*repeat); ++ for(i=0; i<MAX_EP_NUM; i++){ ++ cur_sch_ep = ep_array[i]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_interval = cur_sch_ep->interval; ++ ep_offset = cur_sch_ep->offset; ++ if(cur_sch_ep->repeat == 0){ ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + ep_interval - cur_offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = cur_offset + interval - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset % tmp_interval == 0){ ++ tmp_bw_required += cur_sch_ep->bw_cost; ++ } ++ } ++ else{ ++ ep_repeat = cur_sch_ep->repeat; ++ ep_mult = cur_sch_ep->mult; ++ for(k=0; k<=ep_mult; k++){ ++ cur_ep_offset = ep_offset+(k*ep_repeat); ++ if(ep_interval >= interval){ ++ tmp_offset = cur_ep_offset + ep_interval - cur_offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = cur_offset + interval - cur_ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset % tmp_interval == 0){ ++ tmp_bw_required += cur_sch_ep->bw_cost; ++ break; ++ } ++ } ++ } ++ } ++ bw_required[j] = tmp_bw_required; ++ } ++ final_bw_required = SS_BW_BOUND; ++ for(j=0; j<=mult; j++){ ++ if(bw_required[j] < final_bw_required){ ++ final_bw_required = bw_required[j]; ++ } ++ } ++ final_bw_required += bw_required_per_repeat; ++ } ++ return final_bw_required; ++} ++ ++int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){ ++ int i; ++ int bw_required; ++ struct sch_ep *cur_sch_ep; ++ int tmp_offset; ++ int tmp_interval; ++ int ep_offset; ++ int ep_interval; ++ int cur_tt_isoc_interval; //for isoc tt check ++ ++ bw_required = 0; ++ for(i=0; i<MAX_EP_NUM; i++){ ++ ++ cur_sch_ep = (struct sch_ep *)hs_eps[i]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_offset = cur_sch_ep->offset; ++ ep_interval = cur_sch_ep->interval; ++ ++ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){ ++ cur_tt_isoc_interval = ep_interval<<3; ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + cur_tt_isoc_interval - offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = offset + interval - ep_offset; ++ tmp_interval = cur_tt_isoc_interval; ++ } ++ if(cur_sch_ep->is_in){ ++ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){ ++ bw_required += 188; ++ } ++ } ++ else{ ++ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){ ++ bw_required += 188; ++ } ++ } ++ } ++ else{ ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + ep_interval - offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = offset + interval - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset%tmp_interval == 0){ ++ bw_required += cur_sch_ep->bw_cost; ++ } ++ } ++ } ++ bw_required += td_size; ++ return bw_required; ++} ++ ++int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){ ++ char is_cs; ++ int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe; ++ int bw_required, max_bw; ++ int ss_cs_count; ++ int cs_mframe; ++ int max_frame; ++ int i,j; ++ struct sch_ep *cur_sch_ep; ++ int ep_offset; ++ int ep_interval; ++ int ep_cs_count; ++ int tt_isoc_interval; //for isoc tt check ++ int cur_tt_isoc_interval; //for isoc tt check ++ int tmp_offset; ++ int tmp_interval; ++ ++ is_cs = 0; ++ ++ tt_isoc_interval = interval<<3; //frame to mframe ++ if(is_in){ ++ is_cs = 1; ++ } ++ s_frame = offset/8; ++ s_mframe = offset%8; ++ ss_cs_count = (maxp + (188 - 1))/188; ++ if(is_cs){ ++ cs_mframe = offset%8 + 2 + ss_cs_count; ++ if (cs_mframe <= 6) ++ ss_cs_count += 2; ++ else if (cs_mframe == 7) ++ ss_cs_count++; ++ else if (cs_mframe > 8) ++ return -1; ++ } ++ max_bw = 0; ++ if(is_in){ ++ i=2; ++ } ++ for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){ ++ bw_required = 0; ++ for(j=0; j<MAX_EP_NUM; j++){ ++ cur_sch_ep = (struct sch_ep *)hs_eps[j]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_offset = cur_sch_ep->offset; ++ ep_interval = cur_sch_ep->interval; ++ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){ ++ //isoc tt ++ //check if mframe offset overlap ++ //if overlap, add 188 to the bw ++ cur_tt_isoc_interval = ep_interval<<3; ++ if(cur_tt_isoc_interval >= tt_isoc_interval){ ++ tmp_offset = (ep_offset+cur_tt_isoc_interval) - cur_mframe; ++ tmp_interval = tt_isoc_interval; ++ } ++ else{ ++ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset; ++ tmp_interval = cur_tt_isoc_interval; ++ } ++ if(cur_sch_ep->is_in){ ++ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){ ++ bw_required += 188; ++ } ++ } ++ else{ ++ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){ ++ bw_required += 188; ++ } ++ } ++ ++ } ++ else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){ ++ //check if mframe ++ if(ep_interval >= tt_isoc_interval){ ++ tmp_offset = (ep_offset+ep_interval) - cur_mframe; ++ tmp_interval = tt_isoc_interval; ++ } ++ else{ ++ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset%tmp_interval == 0){ ++ bw_required += cur_sch_ep->bw_cost; ++ } ++ } ++ } ++ bw_required += 188; ++ if(bw_required > max_bw){ ++ max_bw = bw_required; ++ } ++ } ++ return max_bw; ++} ++ ++int count_tt_intr_bw(int interval, int frame_offset){ ++ //check all eps in tt_intr_eps ++ int ret; ++ int i,j; ++ int ep_offset; ++ int ep_interval; ++ int tmp_offset; ++ int tmp_interval; ++ ret = SCH_SUCCESS; ++ struct sch_ep *cur_sch_ep; ++ ++ for(i=0; i<MAX_EP_NUM; i++){ ++ cur_sch_ep = (struct sch_ep *)tt_intr_eps[i]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_offset = cur_sch_ep->offset; ++ ep_interval = cur_sch_ep->interval; ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + ep_interval - frame_offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = frame_offset + interval - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ ++ if(tmp_offset%tmp_interval==0){ ++ return SCH_FAIL; ++ } ++ } ++ return SCH_SUCCESS; ++} ++ ++struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){ ++ int i; ++ struct sch_ep **ep_array; ++ struct sch_ep *cur_ep; ++ ++ if (is_in && dev_speed == USB_SPEED_SUPER) { ++ ep_array = (struct sch_ep **)ss_in_eps; ++ } ++ else if (dev_speed == USB_SPEED_SUPER) { ++ ep_array = (struct sch_ep **)ss_out_eps; ++ } ++ else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) { ++ ep_array = (struct sch_ep **)hs_eps; ++ } ++ else { ++ ep_array = (struct sch_ep **)tt_intr_eps; ++ } ++ for (i = 0; i < MAX_EP_NUM; i++) { ++ cur_ep = (struct sch_ep *)ep_array[i]; ++ if(cur_ep != NULL && cur_ep->ep == ep){ ++ ep_array[i] = NULL; ++ return cur_ep; ++ } ++ } ++ return NULL; ++} ++ ++int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst ++ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){ ++ mtk_u32 bPkts = 0; ++ mtk_u32 bCsCount = 0; ++ mtk_u32 bBm = 1; ++ mtk_u32 bOffset = 0; ++ mtk_u32 bRepeat = 0; ++ int ret; ++ struct mtk_xhci_ep_ctx *temp_ep_ctx; ++ int td_size; ++ int mframe_idx, frame_idx; ++ int bw_cost; ++ int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat; ++ int cur_offset, cs_mframe; ++ int break_out; ++ int frame_interval; ++ ++ printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp ++ , interval, burst, mult, ep, ep_ctx, sch_ep); ++ if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){ ++ frame_interval = interval >> 3; ++ for(frame_idx=0; frame_idx<frame_interval; frame_idx++){ ++ printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx); ++ if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){ ++ printk(KERN_ERR "check OK............\n"); ++ bOffset = frame_idx<<3; ++ bPkts = 1; ++ bCsCount = 3; ++ bw_cost = maxp; ++ bRepeat = 0; ++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult ++ , bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){ ++ return SCH_FAIL; ++ } ++ ret = SCH_SUCCESS; ++ break; ++ } ++ } ++ } ++ else if(isTT && ep_type == USB_EP_ISOC){ ++ best_bw = HS_BW_BOUND; ++ best_bw_idx = -1; ++ cur_bw = 0; ++ td_size = maxp; ++ break_out = 0; ++ frame_interval = interval>>3; ++ for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){ ++ for(mframe_idx=0; mframe_idx<8; mframe_idx++){ ++ cur_offset = (frame_idx*8) + mframe_idx; ++ cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size); ++ if(cur_bw > 0 && cur_bw < best_bw){ ++ best_bw_idx = cur_offset; ++ best_bw = cur_bw; ++ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){ ++ break_out = 1; ++ break; ++ } ++ } ++ } ++ } ++ if(best_bw_idx == -1){ ++ return SCH_FAIL; ++ } ++ else{ ++ bOffset = best_bw_idx; ++ bPkts = 1; ++ bCsCount = (maxp + (188 - 1)) / 188; ++ if(is_in){ ++ cs_mframe = bOffset%8 + 2 + bCsCount; ++ if (cs_mframe <= 6) ++ bCsCount += 2; ++ else if (cs_mframe == 7) ++ bCsCount++; ++ } ++ bw_cost = 188; ++ bRepeat = 0; ++ if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult ++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ ++ return SCH_FAIL; ++ } ++ ret = SCH_SUCCESS; ++ } ++ } ++ else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){ ++ bPkts = 1; ++ ret = SCH_SUCCESS; ++ } ++ else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){ ++ bPkts = 1; ++ ret = SCH_SUCCESS; ++ } ++ else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){ ++ best_bw = HS_BW_BOUND; ++ best_bw_idx = -1; ++ cur_bw = 0; ++ td_size = maxp*(burst+1); ++ for(cur_offset = 0; cur_offset<interval; cur_offset++){ ++ cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size); ++ if(cur_bw > 0 && cur_bw < best_bw){ ++ best_bw_idx = cur_offset; ++ best_bw = cur_bw; ++ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){ ++ break; ++ } ++ } ++ } ++ if(best_bw_idx == -1){ ++ return SCH_FAIL; ++ } ++ else{ ++ bOffset = best_bw_idx; ++ bPkts = burst + 1; ++ bCsCount = 0; ++ bw_cost = td_size; ++ bRepeat = 0; ++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult ++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ ++ return SCH_FAIL; ++ } ++ ret = SCH_SUCCESS; ++ } ++ } ++ else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){ ++ best_bw = SS_BW_BOUND; ++ best_bw_idx = -1; ++ cur_bw = 0; ++ td_size = maxp * (mult+1) * (burst+1); ++ if(mult == 0){ ++ max_repeat = 0; ++ } ++ else{ ++ max_repeat = (interval-1)/(mult+1); ++ } ++ break_out = 0; ++ for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){ ++ for(repeat = max_repeat; repeat >= 0; repeat--){ ++ cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx ++ , repeat, td_size); ++ printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n" ++ , frame_idx, repeat, td_size, cur_bw); ++ if(cur_bw > 0 && cur_bw < best_bw){ ++ best_bw_idx = frame_idx; ++ best_bw_repeat = repeat; ++ best_bw = cur_bw; ++ if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){ ++ break_out = 1; ++ break; ++ } ++ } ++ } ++ } ++ printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat); ++ if(best_bw_idx == -1){ ++ return SCH_FAIL; ++ } ++ else{ ++ bOffset = best_bw_idx; ++ bCsCount = 0; ++ bRepeat = best_bw_repeat; ++ if(bRepeat == 0){ ++ bw_cost = (burst+1)*(mult+1)*maxp; ++ bPkts = (burst+1)*(mult+1); ++ } ++ else{ ++ bw_cost = (burst+1)*maxp; ++ bPkts = (burst+1); ++ } ++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult ++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ ++ return SCH_FAIL; ++ } ++ ret = SCH_SUCCESS; ++ } ++ } ++ else{ ++ bPkts = 1; ++ ret = SCH_SUCCESS; ++ } ++ if(ret == SCH_SUCCESS){ ++ temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx; ++ temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm)); ++ temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat)); ++ ++ printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm); ++ printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat); ++ return SCH_SUCCESS; ++ } ++ else{ ++ return SCH_FAIL; ++ } ++} +diff --git a/drivers/usb/host/xhci-mtk-scheduler.h b/drivers/usb/host/xhci-mtk-scheduler.h +new file mode 100644 +index 0000000..c55dfb1 +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk-scheduler.h +@@ -0,0 +1,77 @@ ++#ifndef _XHCI_MTK_SCHEDULER_H ++#define _XHCI_MTK_SCHEDULER_H ++ ++#define MTK_SCH_NEW 1 ++ ++#define SCH_SUCCESS 1 ++#define SCH_FAIL 0 ++ ++#define MAX_EP_NUM 64 ++#define SS_BW_BOUND 51000 ++#define HS_BW_BOUND 6144 ++ ++#define USB_EP_CONTROL 0 ++#define USB_EP_ISOC 1 ++#define USB_EP_BULK 2 ++#define USB_EP_INT 3 ++ ++#define USB_SPEED_LOW 1 ++#define USB_SPEED_FULL 2 ++#define USB_SPEED_HIGH 3 ++#define USB_SPEED_SUPER 5 ++ ++/* mtk scheduler bitmasks */ ++#define BPKTS(p) ((p) & 0x3f) ++#define BCSCOUNT(p) (((p) & 0x7) << 8) ++#define BBM(p) ((p) << 11) ++#define BOFFSET(p) ((p) & 0x3fff) ++#define BREPEAT(p) (((p) & 0x7fff) << 16) ++ ++ ++#if 1 ++typedef unsigned int mtk_u32; ++typedef unsigned long long mtk_u64; ++#endif ++ ++#define NULL ((void *)0) ++ ++struct mtk_xhci_ep_ctx { ++ mtk_u32 ep_info; ++ mtk_u32 ep_info2; ++ mtk_u64 deq; ++ mtk_u32 tx_info; ++ /* offset 0x14 - 0x1f reserved for HC internal use */ ++ mtk_u32 reserved[3]; ++}; ++ ++ ++struct sch_ep ++{ ++ //device info ++ int dev_speed; ++ int isTT; ++ //ep info ++ int is_in; ++ int ep_type; ++ int maxp; ++ int interval; ++ int burst; ++ int mult; ++ //scheduling info ++ int offset; ++ int repeat; ++ int pkts; ++ int cs_count; ++ int burst_mode; ++ //other ++ int bw_cost; //bandwidth cost in each repeat; including overhead ++ mtk_u32 *ep; //address of usb_endpoint pointer ++}; ++ ++int mtk_xhci_scheduler_init(void); ++int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst ++ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep); ++struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep); ++ ++ ++#endif +diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c +new file mode 100644 +index 0000000..2eed0a1 +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk.c +@@ -0,0 +1,265 @@ ++#include "xhci-mtk.h" ++#include "xhci-mtk-power.h" ++#include "xhci.h" ++#include "mtk-phy.h" ++#ifdef CONFIG_C60802_SUPPORT ++#include "mtk-phy-c60802.h" ++#endif ++#include "xhci-mtk-scheduler.h" ++#include <linux/kernel.h> /* printk() */ ++#include <linux/slab.h> ++#include <linux/delay.h> ++#include <asm/uaccess.h> ++#include <linux/dma-mapping.h> ++#include <linux/platform_device.h> ++ ++void setInitialReg(void ) ++{ ++ __u32 __iomem *addr; ++ u32 temp; ++ ++ /* set SSUSB DMA burst size to 128B */ ++ addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG; ++ temp = SSUSB_HDMA_CFG_MT7621_VALUE; ++ writel(temp, addr); ++ ++ /* extend U3 LTSSM Polling.LFPS timeout value */ ++ addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3; ++ temp = U3_LTSSM_TIMING_PARAMETER3_VALUE; ++ writel(temp, addr); ++ ++ /* EOF */ ++ addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF; ++ temp = SYNC_HS_EOF_VALUE; ++ writel(temp, addr); ++ ++#if defined (CONFIG_PERIODIC_ENP) ++ /* HSCH_CFG1: SCH2_FIFO_DEPTH */ ++ addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1; ++ temp = readl(addr); ++ temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET); ++ writel(temp, addr); ++#endif ++ ++ /* Doorbell handling */ ++ addr = SIFSLV_IPPC + SSUSB_IP_SPAR0; ++ temp = 0x1; ++ writel(temp, addr); ++ ++ /* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */ ++ /* Port 0 */ ++ addr = U2_PHY_BASE + U2_PHYD_CR1; ++ temp = readl(addr); ++ temp &= ~(0x3 << 18); ++ temp |= (1 << 18); ++ writel(temp, addr); ++ ++ /* Port 1 */ ++ addr = U2_PHY_BASE_P1 + U2_PHYD_CR1; ++ temp = readl(addr); ++ temp &= ~(0x3 << 18); ++ temp |= (1 << 18); ++ writel(temp, addr); ++} ++ ++ ++void setLatchSel(void){ ++ __u32 __iomem *latch_sel_addr; ++ u32 latch_sel_value; ++ latch_sel_addr = U3_PIPE_LATCH_SEL_ADD; ++ latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX); ++ writel(latch_sel_value, latch_sel_addr); ++} ++ ++void reinitIP(void){ ++ __u32 __iomem *ip_reset_addr; ++ u32 ip_reset_value; ++ ++ enableAllClockPower(); ++ mtk_xhci_scheduler_init(); ++} ++ ++void dbg_prb_out(void){ ++ mtk_probe_init(0x0f0f0f0f); ++ mtk_probe_out(0xffffffff); ++ mtk_probe_out(0x01010101); ++ mtk_probe_out(0x02020202); ++ mtk_probe_out(0x04040404); ++ mtk_probe_out(0x08080808); ++ mtk_probe_out(0x10101010); ++ mtk_probe_out(0x20202020); ++ mtk_probe_out(0x40404040); ++ mtk_probe_out(0x80808080); ++ mtk_probe_out(0x55555555); ++ mtk_probe_out(0xaaaaaaaa); ++} ++ ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++#define RET_SUCCESS 0 ++#define RET_FAIL 1 ++ ++static int dbg_u3w(int argc, char**argv) ++{ ++ int u4TimingValue; ++ char u1TimingValue; ++ int u4TimingAddress; ++ ++ if (argc<3) ++ { ++ printk(KERN_ERR "Arg: address value\n"); ++ return RET_FAIL; ++ } ++ u3phy_init(); ++ ++ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16); ++ u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16); ++ u1TimingValue = u4TimingValue & 0xff; ++ /* access MMIO directly */ ++ writel(u1TimingValue, u4TimingAddress); ++ printk(KERN_ERR "Write done\n"); ++ return RET_SUCCESS; ++ ++} ++ ++static int dbg_u3r(int argc, char**argv) ++{ ++ char u1ReadTimingValue; ++ int u4TimingAddress; ++ if (argc<2) ++ { ++ printk(KERN_ERR "Arg: address\n"); ++ return 0; ++ } ++ u3phy_init(); ++ mdelay(500); ++ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16); ++ /* access MMIO directly */ ++ u1ReadTimingValue = readl(u4TimingAddress); ++ printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue); ++ return 0; ++} ++ ++static int dbg_u3init(int argc, char**argv) ++{ ++ int ret; ++ ret = u3phy_init(); ++ printk(KERN_ERR "phy registers and operations initial done\n"); ++ if(u3phy_ops->u2_slew_rate_calibration){ ++ u3phy_ops->u2_slew_rate_calibration(u3phy); ++ } ++ else{ ++ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n"); ++ } ++ if(u3phy_ops->init(u3phy) == PHY_TRUE) ++ return RET_SUCCESS; ++ return RET_FAIL; ++} ++ ++void dbg_setU1U2(int argc, char**argv){ ++ struct xhci_hcd *xhci; ++ int u1_value; ++ int u2_value; ++ u32 port_id, temp; ++ u32 __iomem *addr; ++ ++ if (argc<3) ++ { ++ printk(KERN_ERR "Arg: u1value u2value\n"); ++ return RET_FAIL; ++ } ++ ++ u1_value = (int)simple_strtol(argv[1], &argv[1], 10); ++ u2_value = (int)simple_strtol(argv[2], &argv[2], 10); ++ addr = (SSUSB_U3_XHCI_BASE + 0x424); ++ temp = readl(addr); ++ temp = temp & (~(0x0000ffff)); ++ temp = temp | u1_value | (u2_value<<8); ++ writel(temp, addr); ++} ++/////////////////////////////////////////////////////////////////////////////// ++ ++int call_function(char *buf) ++{ ++ int i; ++ int argc; ++ char *argv[80]; ++ ++ argc = 0; ++ do ++ { ++ argv[argc] = strsep(&buf, " "); ++ printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]); ++ argc++; ++ } while (buf); ++ if (!strcmp("dbg.r", argv[0])) ++ dbg_prb_out(); ++ else if (!strcmp("dbg.u3w", argv[0])) ++ dbg_u3w(argc, argv); ++ else if (!strcmp("dbg.u3r", argv[0])) ++ dbg_u3r(argc, argv); ++ else if (!strcmp("dbg.u3i", argv[0])) ++ dbg_u3init(argc, argv); ++ else if (!strcmp("pw.u1u2", argv[0])) ++ dbg_setU1U2(argc, argv); ++ return 0; ++} ++ ++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ char w_buf[200]; ++ char r_buf[200] = "this is a test"; ++ int len = 200; ++ ++ switch (cmd) { ++ case IOCTL_READ: ++ copy_to_user((char *) arg, r_buf, len); ++ printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf); ++ break; ++ case IOCTL_WRITE: ++ copy_from_user(w_buf, (char *) arg, len); ++ printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf); ++ ++ //invoke function ++ return call_function(w_buf); ++ break; ++ default: ++ return -ENOTTY; ++ } ++ ++ return len; ++} ++ ++int xhci_mtk_test_open(struct inode *inode, struct file *file) ++{ ++ ++ printk(KERN_DEBUG "xhci_mtk_test open: successful\n"); ++ return 0; ++} ++ ++int xhci_mtk_test_release(struct inode *inode, struct file *file) ++{ ++ ++ printk(KERN_DEBUG "xhci_mtk_test release: successful\n"); ++ return 0; ++} ++ ++ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr) ++{ ++ ++ printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n"); ++ return 0; ++} ++ ++ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos) ++{ ++ ++ printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n"); ++ return 0; ++} ++ ++ ++ ++ +diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h +new file mode 100644 +index 0000000..0f2d5e8 +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk.h +@@ -0,0 +1,120 @@ ++#ifndef _XHCI_MTK_H ++#define _XHCI_MTK_H ++ ++#include <linux/usb.h> ++#include "xhci.h" ++ ++#define SSUSB_U3_XHCI_BASE 0xBE1C0000 ++#define SSUSB_U3_MAC_BASE 0xBE1C2400 ++#define SSUSB_U3_SYS_BASE 0xBE1C2600 ++#define SSUSB_U2_SYS_BASE 0xBE1C3400 ++#define SSUB_SIF_SLV_TOP 0xBE1D0000 ++#define SIFSLV_IPPC (SSUB_SIF_SLV_TOP + 0x700) ++ ++#define U3_PIPE_LATCH_SEL_ADD SSUSB_U3_MAC_BASE + 0x130 ++#define U3_PIPE_LATCH_TX 0 ++#define U3_PIPE_LATCH_RX 0 ++ ++#define U3_UX_EXIT_LFPS_TIMING_PAR 0xa0 ++#define U3_REF_CK_PAR 0xb0 ++#define U3_RX_UX_EXIT_LFPS_REF_OFFSET 8 ++#define U3_RX_UX_EXIT_LFPS_REF 3 ++#define U3_REF_CK_VAL 10 ++ ++#define U3_TIMING_PULSE_CTRL 0xb4 ++#define CNT_1US_VALUE 63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125 ++ ++#define USB20_TIMING_PARAMETER 0x40 ++#define TIME_VALUE_1US 63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125 ++ ++#define LINK_PM_TIMER 0x8 ++#define PM_LC_TIMEOUT_VALUE 3 ++ ++#define XHCI_IMOD 0x624 ++#define XHCI_IMOD_MT7621_VALUE 0x10 ++ ++#define SSUSB_HDMA_CFG 0x950 ++#define SSUSB_HDMA_CFG_MT7621_VALUE 0x10E0E0C ++ ++#define U3_LTSSM_TIMING_PARAMETER3 0x2514 ++#define U3_LTSSM_TIMING_PARAMETER3_VALUE 0x3E8012C ++ ++#define U2_PHYD_CR1 0x64 ++ ++#define SSUSB_IP_SPAR0 0xC8 ++ ++#define SYNC_HS_EOF 0x938 ++#define SYNC_HS_EOF_VALUE 0x201F3 ++ ++#define HSCH_CFG1 0x960 ++#define SCH2_FIFO_DEPTH_OFFSET 16 ++ ++ ++#define SSUSB_IP_PW_CTRL (SIFSLV_IPPC+0x0) ++#define SSUSB_IP_SW_RST (1<<0) ++#define SSUSB_IP_PW_CTRL_1 (SIFSLV_IPPC+0x4) ++#define SSUSB_IP_PDN (1<<0) ++#define SSUSB_U3_CTRL(p) (SIFSLV_IPPC+0x30+(p*0x08)) ++#define SSUSB_U3_PORT_DIS (1<<0) ++#define SSUSB_U3_PORT_PDN (1<<1) ++#define SSUSB_U3_PORT_HOST_SEL (1<<2) ++#define SSUSB_U3_PORT_CKBG_EN (1<<3) ++#define SSUSB_U3_PORT_MAC_RST (1<<4) ++#define SSUSB_U3_PORT_PHYD_RST (1<<5) ++#define SSUSB_U2_CTRL(p) (SIFSLV_IPPC+(0x50)+(p*0x08)) ++#define SSUSB_U2_PORT_DIS (1<<0) ++#define SSUSB_U2_PORT_PDN (1<<1) ++#define SSUSB_U2_PORT_HOST_SEL (1<<2) ++#define SSUSB_U2_PORT_CKBG_EN (1<<3) ++#define SSUSB_U2_PORT_MAC_RST (1<<4) ++#define SSUSB_U2_PORT_PHYD_RST (1<<5) ++#define SSUSB_IP_CAP (SIFSLV_IPPC+0x024) ++ ++#define SSUSB_U3_PORT_NUM(p) (p & 0xff) ++#define SSUSB_U2_PORT_NUM(p) ((p>>8) & 0xff) ++ ++ ++#define XHCI_MTK_TEST_MAJOR 234 ++#define DEVICE_NAME "xhci_mtk_test" ++ ++#define CLI_MAGIC 'CLI' ++#define IOCTL_READ _IOR(CLI_MAGIC, 0, int) ++#define IOCTL_WRITE _IOW(CLI_MAGIC, 1, int) ++ ++void reinitIP(void); ++void setInitialReg(void); ++void dbg_prb_out(void); ++int call_function(char *buf); ++ ++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); ++int xhci_mtk_test_open(struct inode *inode, struct file *file); ++int xhci_mtk_test_release(struct inode *inode, struct file *file); ++ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr); ++ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos); ++ ++/* ++ mediatek probe out ++*/ ++/************************************************************************************/ ++ ++#define SW_PRB_OUT_ADDR (SIFSLV_IPPC+0xc0) ++#define PRB_MODULE_SEL_ADDR (SIFSLV_IPPC+0xbc) ++ ++static inline void mtk_probe_init(const u32 byte){ ++ __u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR; ++ writel(byte, ptr); ++} ++ ++static inline void mtk_probe_out(const u32 value){ ++ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR; ++ writel(value, ptr); ++} ++ ++static inline u32 mtk_probe_value(void){ ++ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR; ++ ++ return readl(ptr); ++} ++ ++ ++#endif +diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c +index 8abda5c..a11b82f 100644 +--- a/drivers/usb/host/xhci-plat.c ++++ b/drivers/usb/host/xhci-plat.c +@@ -27,6 +27,13 @@ static void xhci_plat_quirks(struct device *dev, struct xhci_hcd *xhci) + * dev struct in order to setup MSI + */ + xhci->quirks |= XHCI_PLAT; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ /* MTK host controller gives a spurious successful event after a ++ * short transfer. Ignore it. ++ */ ++ xhci->quirks |= XHCI_SPURIOUS_SUCCESS; ++ xhci->quirks |= XHCI_LPM_SUPPORT; ++#endif + } + + /* called during probe() after chip reset completes */ +@@ -99,13 +106,19 @@ static int xhci_plat_probe(struct platform_device *pdev) + + driver = &xhci_plat_xhci_driver; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ irq = XHC_IRQ; ++#else + irq = platform_get_irq(pdev, 0); ++#endif + if (irq < 0) + return -ENODEV; + ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; ++#endif + + /* Initialize dma_mask and coherent_dma_mask to 32-bits */ + ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); +@@ -120,8 +133,13 @@ static int xhci_plat_probe(struct platform_device *pdev) + if (!hcd) + return -ENOMEM; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ hcd->rsrc_start = (uint32_t)XHC_IO_START; ++ hcd->rsrc_len = XHC_IO_LENGTH; ++#else + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); ++#endif + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { +diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c +index 0ed64eb..415bec0 100644 +--- a/drivers/usb/host/xhci-ring.c ++++ b/drivers/usb/host/xhci-ring.c +@@ -232,7 +232,6 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, + */ + if (!chain && !more_trbs_coming) + break; +- + /* If we're not dealing with 0.95 hardware or + * isoc rings on AMD 0.96 host, + * carry over the chain bit of the previous TRB +@@ -268,16 +267,20 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, + static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, + unsigned int num_trbs) + { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + int num_trbs_in_deq_seg; ++#endif + + if (ring->num_trbs_free < num_trbs) + return 0; + ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) { + num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs; + if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg) + return 0; + } ++#endif + + return 1; + } +@@ -2992,6 +2995,7 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, + next = ring->enqueue; + + while (last_trb(xhci, ring, ring->enq_seg, next)) { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + /* If we're not dealing with 0.95 hardware or isoc rings + * on AMD 0.96 host, clear the chain bit. + */ +@@ -3001,7 +3005,9 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring, + next->link.control &= cpu_to_le32(~TRB_CHAIN); + else + next->link.control |= cpu_to_le32(TRB_CHAIN); +- ++#else ++ next->link.control &= cpu_to_le32(~TRB_CHAIN); ++#endif + wmb(); + next->link.control ^= cpu_to_le32(TRB_CYCLE); + +@@ -3131,6 +3137,9 @@ static void giveback_first_trb(struct xhci_hcd *xhci, int slot_id, + start_trb->field[3] |= cpu_to_le32(start_cycle); + else + start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE); ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ wmb(); ++#endif + xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); + } + +@@ -3186,6 +3195,29 @@ static u32 xhci_td_remainder(unsigned int remainder) + return (remainder >> 10) << 17; + } + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length) ++{ ++ u32 max = 31; ++ int remainder, td_packet_count, packet_transferred; ++ ++ //0 for the last TRB ++ //FIXME: need to workaround if there is ZLP in this TD ++ if (td_running_total + trb_buffer_length == td_transfer_size) ++ return 0; ++ ++ //FIXME: need to take care of high-bandwidth (MAX_ESIT) ++ packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp; ++ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp); ++ remainder = td_packet_count - packet_transferred; ++ ++ if (remainder > max) ++ return max << 17; ++ else ++ return remainder << 17; ++} ++#endif ++ + /* + * For xHCI 1.0 host controllers, TD size is the number of max packet sized + * packets remaining in the TD (*not* including this TRB). +@@ -3323,6 +3355,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + } + + /* Set the TRB length, TD size, and interrupter fields. */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->hci_version < 0x100) { + remainder = xhci_td_remainder( + urb->transfer_buffer_length - +@@ -3332,6 +3365,13 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + trb_buff_len, total_packet_count, urb, + num_trbs - 1); + } ++#else ++ if (num_trbs > 1) ++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, ++ running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len); ++#endif ++ ++ + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); +@@ -3394,6 +3434,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + int running_total, trb_buff_len, ret; + unsigned int total_packet_count; + u64 addr; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ int max_packet; ++#endif + + if (urb->num_sgs) + return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index); +@@ -3419,6 +3462,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + running_total += TRB_MAX_BUFF_SIZE; + } + /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ switch(urb->dev->speed){ ++ case USB_SPEED_SUPER: ++ max_packet = urb->ep->desc.wMaxPacketSize; ++ break; ++ case USB_SPEED_HIGH: ++ case USB_SPEED_FULL: ++ case USB_SPEED_LOW: ++ case USB_SPEED_WIRELESS: ++ case USB_SPEED_UNKNOWN: ++ default: ++ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff; ++ break; ++ } ++ if((urb->transfer_flags & URB_ZERO_PACKET) ++ && ((urb->transfer_buffer_length % max_packet) == 0)){ ++ num_trbs++; ++ } ++#endif + + ret = prepare_transfer(xhci, xhci->devs[slot_id], + ep_index, urb->stream_id, +@@ -3478,6 +3540,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + field |= TRB_ISP; + + /* Set the TRB length, TD size, and interrupter fields. */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->hci_version < 0x100) { + remainder = xhci_td_remainder( + urb->transfer_buffer_length - +@@ -3487,6 +3550,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + trb_buff_len, total_packet_count, urb, + num_trbs - 1); + } ++#else ++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len); ++#endif ++ + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); +@@ -3576,7 +3643,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + field |= 0x1; + + /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if (1) { ++#else + if (xhci->hci_version == 0x100) { ++#endif + if (urb->transfer_buffer_length > 0) { + if (setup->bRequestType & USB_DIR_IN) + field |= TRB_TX_TYPE(TRB_DATA_IN); +@@ -3600,7 +3671,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + field = TRB_TYPE(TRB_DATA); + + length_field = TRB_LEN(urb->transfer_buffer_length) | ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + xhci_td_remainder(urb->transfer_buffer_length) | ++#else ++ //CC: MTK style, no scatter-gather for control transfer ++ 0 | ++#endif + TRB_INTR_TARGET(0); + if (urb->transfer_buffer_length > 0) { + if (setup->bRequestType & USB_DIR_IN) +@@ -3611,7 +3687,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + length_field, + field | ep_ring->cycle_state); + } +- ++ + /* Save the DMA address of the last TRB in the TD */ + td->last_trb = ep_ring->enqueue; + +@@ -3723,6 +3799,9 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + u64 start_addr, addr; + int i, j; + bool more_trbs_coming; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ int max_packet; ++#endif + + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; + +@@ -3736,6 +3815,21 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + start_trb = &ep_ring->enqueue->generic; + start_cycle = ep_ring->cycle_state; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ switch(urb->dev->speed){ ++ case USB_SPEED_SUPER: ++ max_packet = urb->ep->desc.wMaxPacketSize; ++ break; ++ case USB_SPEED_HIGH: ++ case USB_SPEED_FULL: ++ case USB_SPEED_LOW: ++ case USB_SPEED_WIRELESS: ++ case USB_SPEED_UNKNOWN: ++ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff; ++ break; ++ } ++#endif ++ + urb_priv = urb->hcpriv; + /* Queue the first TRB, even if it's zero-length */ + for (i = 0; i < num_tds; i++) { +@@ -3807,9 +3901,13 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + } else { + td->last_trb = ep_ring->enqueue; + field |= TRB_IOC; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if (!(xhci->quirks & XHCI_AVOID_BEI)) { ++#else + if (xhci->hci_version == 0x100 && + !(xhci->quirks & + XHCI_AVOID_BEI)) { ++#endif + /* Set BEI bit except for the last td */ + if (i < num_tds - 1) + field |= TRB_BEI; +@@ -3824,6 +3922,7 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + trb_buff_len = td_remain_len; + + /* Set the TRB length, TD size, & interrupter fields. */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->hci_version < 0x100) { + remainder = xhci_td_remainder( + td_len - running_total); +@@ -3833,6 +3932,10 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, + total_packet_count, urb, + (trbs_per_td - j - 1)); + } ++#else ++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len); ++#endif ++ + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); +diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c +index 924a6cc..27b7d2f 100644 +--- a/drivers/usb/host/xhci.c ++++ b/drivers/usb/host/xhci.c +@@ -32,6 +32,16 @@ + #include "xhci.h" + #include "xhci-trace.h" + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#include <asm/uaccess.h> ++#include <linux/dma-mapping.h> ++#include <linux/platform_device.h> ++#include "mtk-phy.h" ++#include "xhci-mtk-scheduler.h" ++#include "xhci-mtk-power.h" ++#include "xhci-mtk.h" ++#endif ++ + #define DRIVER_AUTHOR "Sarah Sharp" + #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" + +@@ -44,6 +54,18 @@ static unsigned int quirks; + module_param(quirks, uint, S_IRUGO); + MODULE_PARM_DESC(quirks, "Bit flags for quirks to be enabled as default"); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); ++static struct file_operations xhci_mtk_test_fops = { ++ .owner = THIS_MODULE, ++ .read = xhci_mtk_test_read, ++ .write = xhci_mtk_test_write, ++ .unlocked_ioctl = xhci_mtk_test_unlock_ioctl, ++ .open = xhci_mtk_test_open, ++ .release = xhci_mtk_test_release, ++}; ++#endif ++ + /* TODO: copied from ehci-hcd.c - can this be refactored? */ + /* + * xhci_handshake - spin reading hc until handshake completes or fails +@@ -196,7 +218,7 @@ int xhci_reset(struct xhci_hcd *xhci) + return ret; + } + +-#ifdef CONFIG_PCI ++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + static int xhci_free_msi(struct xhci_hcd *xhci) + { + int i; +@@ -399,6 +421,7 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) + return ret; + } + hcd->irq = pdev->irq; ++ + return 0; + } + +@@ -442,6 +465,11 @@ static void compliance_mode_recovery(unsigned long arg) + "Attempting compliance mode recovery"); + hcd = xhci->shared_hcd; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ temp |= (1 << 31); ++ writel(temp, xhci->usb3_ports[i]); ++#endif ++ + if (hcd->state == HC_STATE_SUSPENDED) + usb_hcd_resume_root_hub(hcd); + +@@ -491,6 +519,9 @@ bool xhci_compliance_mode_recovery_timer_quirk_check(void) + { + const char *dmi_product_name, *dmi_sys_vendor; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ return true; ++#endif + dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); + dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!dmi_product_name || !dmi_sys_vendor) +@@ -536,6 +567,10 @@ int xhci_init(struct usb_hcd *hcd) + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "xHCI doesn't need link TRB QUIRK"); + } ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ mtk_xhci_scheduler_init(); ++#endif + retval = xhci_mem_init(xhci, GFP_KERNEL); + xhci_dbg_trace(xhci, trace_xhci_dbg_init, "Finished xhci_init"); + +@@ -620,7 +655,11 @@ int xhci_run(struct usb_hcd *hcd) + "// Set the interrupt modulation register"); + temp = readl(&xhci->ir_set->irq_control); + temp &= ~ER_IRQ_INTERVAL_MASK; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ temp |= (u32) 16; ++#else + temp |= (u32) 160; ++#endif + writel(temp, &xhci->ir_set->irq_control); + + /* Set the HCD state before we enable the irqs */ +@@ -641,6 +680,9 @@ int xhci_run(struct usb_hcd *hcd) + xhci_queue_vendor_command(xhci, 0, 0, 0, + TRB_TYPE(TRB_NEC_GET_FW)); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ enableXhciAllPortPower(xhci); ++#endif + xhci_dbg_trace(xhci, trace_xhci_dbg_init, + "Finished xhci_run for USB2 roothub"); + return 0; +@@ -970,7 +1012,6 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) + + /* If restore operation fails, re-initialize the HC during resume */ + if ((temp & STS_SRE) || hibernated) { +- + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + !(xhci_all_ports_seen_u0(xhci))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); +@@ -1569,6 +1610,13 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, + u32 drop_flag; + u32 new_add_flags, new_drop_flags, new_slot_info; + int ret; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#if MTK_SCH_NEW ++ struct sch_ep *sch_ep = NULL; ++ int isTT; ++ int ep_type; ++#endif ++#endif + + ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); + if (ret <= 0) +@@ -1626,6 +1674,40 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, + + xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#if MTK_SCH_NEW ++ slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx); ++ if ((slot_ctx->tt_info & 0xff) > 0) { ++ isTT = 1; ++ } ++ else { ++ isTT = 0; ++ } ++ if (usb_endpoint_xfer_int(&ep->desc)) { ++ ep_type = USB_EP_INT; ++ } ++ else if (usb_endpoint_xfer_isoc(&ep->desc)) { ++ ep_type = USB_EP_ISOC; ++ } ++ else if (usb_endpoint_xfer_bulk(&ep->desc)) { ++ ep_type = USB_EP_BULK; ++ } ++ else ++ ep_type = USB_EP_CONTROL; ++ ++ sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc) ++ , isTT, ep_type, (mtk_u32 *)ep); ++ if (sch_ep != NULL) { ++ kfree(sch_ep); ++ } ++ else { ++ xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n"); ++ } ++#else ++ mtk_xhci_scheduler_remove_ep(xhci, udev, ep); ++#endif ++#endif ++ + xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", + (unsigned int) ep->desc.bEndpointAddress, + udev->slot_id, +@@ -1661,6 +1743,18 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, + u32 new_add_flags, new_drop_flags, new_slot_info; + struct xhci_virt_device *virt_dev; + int ret = 0; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ struct xhci_ep_ctx *in_ep_ctx; ++#if MTK_SCH_NEW ++ struct sch_ep *sch_ep; ++ int isTT; ++ int ep_type; ++ int maxp = 0; ++ int burst = 0; ++ int mult = 0; ++ int interval; ++#endif ++#endif + + ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); + if (ret <= 0) { +@@ -1728,6 +1822,56 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, + return -ENOMEM; + } + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); ++#if MTK_SCH_NEW ++ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); ++ if ((slot_ctx->tt_info & 0xff) > 0) { ++ isTT = 1; ++ } ++ else { ++ isTT = 0; ++ } ++ if (usb_endpoint_xfer_int(&ep->desc)) { ++ ep_type = USB_EP_INT; ++ } ++ else if (usb_endpoint_xfer_isoc(&ep->desc)) { ++ ep_type = USB_EP_ISOC; ++ } ++ else if (usb_endpoint_xfer_bulk(&ep->desc)) { ++ ep_type = USB_EP_BULK; ++ } ++ else ++ ep_type = USB_EP_CONTROL; ++ ++ if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH ++ || udev->speed == USB_SPEED_LOW) { ++ maxp = ep->desc.wMaxPacketSize & 0x7FF; ++ burst = ep->desc.wMaxPacketSize >> 11; ++ mult = 0; ++ } ++ else if (udev->speed == USB_SPEED_SUPER) { ++ maxp = ep->desc.wMaxPacketSize & 0x7FF; ++ burst = ep->ss_ep_comp.bMaxBurst; ++ mult = ep->ss_ep_comp.bmAttributes & 0x3; ++ } ++ interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff)); ++ sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL); ++ if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc), ++ isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep ++ , (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) { ++ xhci_err(xhci, "[MTK] not enough bandwidth\n"); ++ ++ return -ENOSPC; ++ } ++#else ++ if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) { ++ xhci_err(xhci, "[MTK] not enough bandwidth\n"); ++ ++ return -ENOSPC; ++ } ++#endif ++#endif + ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); + new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); + +@@ -2722,7 +2866,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) + if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) && + ctrl_ctx->drop_flags == 0) + return 0; +- ++ + xhci_dbg(xhci, "New Input Control Context:\n"); + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); + xhci_dbg_ctx(xhci, virt_dev->in_ctx, +@@ -4349,10 +4493,14 @@ static u16 xhci_call_host_update_timeout_for_endpoint(struct xhci_hcd *xhci, + u16 *timeout) + { + if (state == USB3_LPM_U1) { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->quirks & XHCI_INTEL_HOST) ++#endif + return xhci_calculate_intel_u1_timeout(udev, desc); + } else { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->quirks & XHCI_INTEL_HOST) ++#endif + return xhci_calculate_intel_u2_timeout(udev, desc); + } + +@@ -4737,7 +4885,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) + hcd->self.no_sg_constraint = 1; + + /* XHCI controllers don't stop the ep queue on short packets :| */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + hcd->self.no_stop_on_short = 1; ++#endif + + if (usb_hcd_is_primary_hcd(hcd)) { + xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); +@@ -4800,6 +4950,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) + goto error; + xhci_dbg(xhci, "Reset complete\n"); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ setInitialReg(); ++#endif ++ + /* Set dma_mask and coherent_dma_mask to 64-bits, + * if xHC supports 64-bit addressing */ + if (HCC_64BIT_ADDR(xhci->hcc_params) && +@@ -4824,8 +4978,21 @@ MODULE_DESCRIPTION(DRIVER_DESC); + MODULE_AUTHOR(DRIVER_AUTHOR); + MODULE_LICENSE("GPL"); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++static struct platform_device xhci_platform_dev = { ++ .name = "xhci-hcd", ++ .id = -1, ++ .dev = { ++ .coherent_dma_mask = 0xffffffff, ++ }, ++}; ++#endif ++ + static int __init xhci_hcd_init(void) + { ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ struct platform_device *pPlatformDev; ++#endif + int retval; + + retval = xhci_register_pci(); +@@ -4838,6 +5005,33 @@ static int __init xhci_hcd_init(void) + pr_debug("Problem registering platform driver.\n"); + goto unreg_pci; + } ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ retval = register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops); ++ ++ u3phy_init(); ++ if (u3phy_ops->u2_slew_rate_calibration) { ++ u3phy_ops->u2_slew_rate_calibration(u3phy); ++ u3phy_ops->u2_slew_rate_calibration(u3phy_p1); ++ } ++ else{ ++ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n"); ++ } ++ u3phy_ops->init(u3phy); ++ reinitIP(); ++ ++ pPlatformDev = &xhci_platform_dev; ++ memset(pPlatformDev, 0, sizeof(struct platform_device)); ++ pPlatformDev->name = "xhci-hcd"; ++ pPlatformDev->id = -1; ++ pPlatformDev->dev.coherent_dma_mask = 0xffffffff; ++ pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask; ++ ++ retval = platform_device_register(&xhci_platform_dev); ++ if (retval < 0) ++ xhci_unregister_plat(); ++#endif ++ + /* + * Check the compiler generated sizes of structures that must be laid + * out in specific ways for hardware access. +@@ -4855,6 +5049,7 @@ static int __init xhci_hcd_init(void) + BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8); + /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */ + BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8); ++ + return 0; + unreg_pci: + xhci_unregister_pci(); +diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h +index 58ed9d0..dda072f 100644 +--- a/drivers/usb/host/xhci.h ++++ b/drivers/usb/host/xhci.h +@@ -29,9 +29,24 @@ + #include <linux/usb/hcd.h> + + /* Code sharing between pci-quirks and xhci hcd */ +-#include "xhci-ext-caps.h" ++#include "xhci-ext-caps.h" + #include "pci-quirks.h" + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#define XHC_IRQ (22 + 8) ++#define XHC_IO_START 0x1E1C0000 ++#define XHC_IO_LENGTH 0x10000 ++/* mtk scheduler bitmasks */ ++#define BPKTS(p) ((p) & 0x3f) ++#define BCSCOUNT(p) (((p) & 0x7) << 8) ++#define BBM(p) ((p) << 11) ++#define BOFFSET(p) ((p) & 0x3fff) ++#define BREPEAT(p) (((p) & 0x7fff) << 16) ++#endif ++ ++ ++ ++ + /* xHCI PCI Configuration Registers */ + #define XHCI_SBRN_OFFSET (0x60) + +@@ -1579,8 +1594,12 @@ struct xhci_hcd { + /* Compliance Mode Recovery Data */ + struct timer_list comp_mode_recovery_timer; + u32 port_status_u0; ++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM ++#define COMP_MODE_RCVRY_MSECS 5000 ++#else + /* Compliance Mode Timer Triggered every 2 seconds */ + #define COMP_MODE_RCVRY_MSECS 2000 ++#endif + }; + + /* convert between an HCD pointer and the corresponding EHCI_HCD */ +@@ -1728,7 +1747,7 @@ void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv); + void xhci_free_command(struct xhci_hcd *xhci, + struct xhci_command *command); + +-#ifdef CONFIG_PCI ++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + /* xHCI PCI glue */ + int xhci_register_pci(void); + void xhci_unregister_pci(void); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0041-mtd-fix-cfi-cmdset-0002-erase-status-check.patch b/target/linux/ramips/patches-3.14/0041-mtd-fix-cfi-cmdset-0002-erase-status-check.patch new file mode 100644 index 0000000000..871e8c1771 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0041-mtd-fix-cfi-cmdset-0002-erase-status-check.patch @@ -0,0 +1,34 @@ +From f0df443ca7d5d0e4d31aa6769ea12a8cf24d2cd8 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 15 Jul 2013 00:38:51 +0200 +Subject: [PATCH 41/57] mtd: fix cfi cmdset 0002 erase status check + +--- + drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c +index 89b9d68..8d92fc1 100644 +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -1956,7 +1956,7 @@ static int __xipram do_erase_chip(struct map_info *map, struct flchip *chip) + chip->erase_suspended = 0; + } + +- if (chip_ready(map, adr)) ++ if (chip_good(map, adr, map_word_ff(map))) + break; + + if (time_after(jiffies, timeo)) { +@@ -2045,7 +2045,7 @@ static int __xipram do_erase_oneblock(struct map_info *map, struct flchip *chip, + chip->erase_suspended = 0; + } + +- if (chip_ready(map, adr)) { ++ if (chip_good(map, adr, map_word_ff(map))) { + xip_enable(map, chip, adr); + break; + } +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0042-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-3.14/0042-mtd-cfi-cmdset-0002-force-word-write.patch new file mode 100644 index 0000000000..ecee46447a --- /dev/null +++ b/target/linux/ramips/patches-3.14/0042-mtd-cfi-cmdset-0002-force-word-write.patch @@ -0,0 +1,75 @@ +From 39010a26a34a56a7928f9217ac23e5138c5ea952 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 15 Jul 2013 00:39:21 +0200 +Subject: [PATCH 42/57] mtd: cfi cmdset 0002 force word write + +--- + drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++-- + 1 file changed, 7 insertions(+), 2 deletions(-) + +diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c +index 8d92fc1..aa06d16 100644 +--- a/drivers/mtd/chips/cfi_cmdset_0002.c ++++ b/drivers/mtd/chips/cfi_cmdset_0002.c +@@ -41,7 +41,7 @@ + #include <linux/mtd/xip.h> + + #define AMD_BOOTLOC_BUG +-#define FORCE_WORD_WRITE 0 ++#define FORCE_WORD_WRITE 1 + + #define MAX_WORD_RETRIES 3 + +@@ -52,7 +52,9 @@ + + static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); + static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#if !FORCE_WORD_WRITE + static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); ++#endif + static int cfi_amdstd_erase_chip(struct mtd_info *, struct erase_info *); + static int cfi_amdstd_erase_varsize(struct mtd_info *, struct erase_info *); + static void cfi_amdstd_sync (struct mtd_info *); +@@ -192,6 +194,7 @@ static void fixup_amd_bootblock(struct mtd_info *mtd) + } + #endif + ++#if !FORCE_WORD_WRITE + static void fixup_use_write_buffers(struct mtd_info *mtd) + { + struct map_info *map = mtd->priv; +@@ -201,6 +204,7 @@ static void fixup_use_write_buffers(struct mtd_info *mtd) + mtd->_write = cfi_amdstd_write_buffers; + } + } ++#endif /* !FORCE_WORD_WRITE */ + + /* Atmel chips don't use the same PRI format as AMD chips */ + static void fixup_convert_atmel_pri(struct mtd_info *mtd) +@@ -1461,6 +1465,7 @@ static int cfi_amdstd_write_words(struct mtd_info *mtd, loff_t to, size_t len, + /* + * FIXME: interleaved mode not tested, and probably not supported! + */ ++#if !FORCE_WORD_WRITE + static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, + unsigned long adr, const u_char *buf, + int len) +@@ -1584,7 +1589,6 @@ static int __xipram do_write_buffer(struct map_info *map, struct flchip *chip, + return ret; + } + +- + static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) + { +@@ -1659,6 +1663,7 @@ static int cfi_amdstd_write_buffers(struct mtd_info *mtd, loff_t to, size_t len, + + return 0; + } ++#endif /* !FORCE_WORD_WRITE */ + + /* + * Wait for the flash chip to become ready to write data +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0043-mtd-ralink-add-mt7620-nand-driver.patch b/target/linux/ramips/patches-3.14/0043-mtd-ralink-add-mt7620-nand-driver.patch new file mode 100644 index 0000000000..6619efd400 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0043-mtd-ralink-add-mt7620-nand-driver.patch @@ -0,0 +1,2421 @@ +From b915fe7cd934160bfaf2cd52f03c118abcae2419 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 17 Nov 2013 17:41:46 +0100 +Subject: [PATCH 43/57] mtd: ralink: add mt7620 nand driver + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/mtd/maps/Kconfig | 4 + + drivers/mtd/maps/Makefile | 2 + + drivers/mtd/maps/ralink_nand.c | 2136 ++++++++++++++++++++++++++++++++++++++++ + drivers/mtd/maps/ralink_nand.h | 232 +++++ + 4 files changed, 2374 insertions(+) + create mode 100644 drivers/mtd/maps/ralink_nand.c + create mode 100644 drivers/mtd/maps/ralink_nand.h + +diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig +index 310dc7c..344f460d 100644 +--- a/drivers/mtd/maps/Kconfig ++++ b/drivers/mtd/maps/Kconfig +@@ -399,4 +399,8 @@ config MTD_LATCH_ADDR + + If compiled as a module, it will be called latch-addr-flash. + ++config MTD_NAND_MT7620 ++ tristate "Support for NAND on Mediatek MT7620" ++ depends on RALINK && SOC_MT7620 ++ + endmenu +diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile +index 141c91a..94d2aa0 100644 +--- a/drivers/mtd/maps/Makefile ++++ b/drivers/mtd/maps/Makefile +@@ -43,3 +43,5 @@ obj-$(CONFIG_MTD_VMU) += vmu-flash.o + obj-$(CONFIG_MTD_GPIO_ADDR) += gpio-addr-flash.o + obj-$(CONFIG_MTD_LATCH_ADDR) += latch-addr-flash.o + obj-$(CONFIG_MTD_LANTIQ) += lantiq-flash.o ++obj-$(CONFIG_MTD_NAND_MT7620) += ralink_nand.o ++ +diff --git a/drivers/mtd/maps/ralink_nand.c b/drivers/mtd/maps/ralink_nand.c +new file mode 100644 +index 0000000..64f9119 +--- /dev/null ++++ b/drivers/mtd/maps/ralink_nand.c +@@ -0,0 +1,2136 @@ ++#define DEBUG ++#include <linux/device.h> ++#undef DEBUG ++#include <linux/slab.h> ++#include <linux/mtd/mtd.h> ++#include <linux/delay.h> ++#include <linux/module.h> ++#include <linux/interrupt.h> ++#include <linux/dma-mapping.h> ++#include <linux/mtd/partitions.h> ++#include <asm/io.h> ++#include <linux/delay.h> ++#include <linux/sched.h> ++#include <linux/of.h> ++#include <linux/platform_device.h> ++ ++#include "ralink_nand.h" ++#ifdef RANDOM_GEN_BAD_BLOCK ++#include <linux/random.h> ++#endif ++ ++#define LARGE_MTD_BOOT_PART_SIZE (CFG_BLOCKSIZE<<2) ++#define LARGE_MTD_CONFIG_PART_SIZE (CFG_BLOCKSIZE<<2) ++#define LARGE_MTD_FACTORY_PART_SIZE (CFG_BLOCKSIZE<<1) ++ ++ ++#define BLOCK_ALIGNED(a) ((a) & (CFG_BLOCKSIZE - 1)) ++ ++#define READ_STATUS_RETRY 1000 ++ ++struct mtd_info *ranfc_mtd = NULL; ++ ++int skipbbt = 0; ++int ranfc_debug = 1; ++static int ranfc_bbt = 1; ++#if defined (WORKAROUND_RX_BUF_OV) ++static int ranfc_verify = 1; ++#endif ++static u32 nand_addrlen; ++ ++#if 0 ++module_param(ranfc_debug, int, 0644); ++module_param(ranfc_bbt, int, 0644); ++module_param(ranfc_verify, int, 0644); ++#endif ++ ++#if 0 ++#define ra_dbg(args...) do { if (ranfc_debug) printk(args); } while(0) ++#else ++#define ra_dbg(args...) ++#endif ++ ++#define CLEAR_INT_STATUS() ra_outl(NFC_INT_ST, ra_inl(NFC_INT_ST)) ++#define NFC_TRANS_DONE() (ra_inl(NFC_INT_ST) & INT_ST_ND_DONE) ++ ++int is_nand_page_2048 = 0; ++const unsigned int nand_size_map[2][3] = {{25, 30, 30}, {20, 27, 30}}; ++ ++static int nfc_wait_ready(int snooze_ms); ++ ++static const char * const mtk_probe_types[] = { "cmdlinepart", "ofpart", NULL }; ++ ++/** ++ * reset nand chip ++ */ ++static int nfc_chip_reset(void) ++{ ++ int status; ++ ++ //ra_dbg("%s:\n", __func__); ++ ++ // reset nand flash ++ ra_outl(NFC_CMD1, 0x0); ++ ra_outl(NFC_CMD2, 0xff); ++ ra_outl(NFC_ADDR, 0x0); ++ ra_outl(NFC_CONF, 0x0411); ++ ++ status = nfc_wait_ready(5); //erase wait 5us ++ if (status & NAND_STATUS_FAIL) { ++ printk("%s: fail \n", __func__); ++ } ++ ++ return (int)(status & NAND_STATUS_FAIL); ++ ++} ++ ++ ++ ++/** ++ * clear NFC and flash chip. ++ */ ++static int nfc_all_reset(void) ++{ ++ int retry; ++ ++ ra_dbg("%s: \n", __func__); ++ ++ // reset controller ++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer ++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer ++ ++ CLEAR_INT_STATUS(); ++ ++ retry = READ_STATUS_RETRY; ++ while ((ra_inl(NFC_INT_ST) & 0x02) != 0x02 && retry--); ++ if (retry <= 0) { ++ printk("nfc_all_reset: clean buffer fail \n"); ++ return -1; ++ } ++ ++ retry = READ_STATUS_RETRY; ++ while ((ra_inl(NFC_STATUS) & 0x1) != 0x0 && retry--) { //fixme, controller is busy ? ++ udelay(1); ++ } ++ ++ nfc_chip_reset(); ++ ++ return 0; ++} ++ ++/** NOTICE: only called by nfc_wait_ready(). ++ * @return -1, nfc can not get transction done ++ * @return 0, ok. ++ */ ++static int _nfc_read_status(char *status) ++{ ++ unsigned long cmd1, conf; ++ int int_st, nfc_st; ++ int retry; ++ ++ cmd1 = 0x70; ++ conf = 0x000101 | (1 << 20); ++ ++ //fixme, should we check nfc status? ++ CLEAR_INT_STATUS(); ++ ++ ra_outl(NFC_CMD1, cmd1); ++ ra_outl(NFC_CONF, conf); ++ ++ /* FIXME, ++ * 1. since we have no wired ready signal, directly ++ * calling this function is not gurantee to read right status under ready state. ++ * 2. the other side, we can not determine how long to become ready, this timeout retry is nonsense. ++ * 3. SUGGESTION: call nfc_read_status() from nfc_wait_ready(), ++ * that is aware about caller (in sementics) and has snooze plused nfc ND_DONE. ++ */ ++ retry = READ_STATUS_RETRY; ++ do { ++ nfc_st = ra_inl(NFC_STATUS); ++ int_st = ra_inl(NFC_INT_ST); ++ ++ ndelay(10); ++ } while (!(int_st & INT_ST_RX_BUF_RDY) && retry--); ++ ++ if (!(int_st & INT_ST_RX_BUF_RDY)) { ++ printk("nfc_read_status: NFC fail, int_st(%x), retry:%x. nfc:%x, reset nfc and flash. \n", ++ int_st, retry, nfc_st); ++ nfc_all_reset(); ++ *status = NAND_STATUS_FAIL; ++ return -1; ++ } ++ ++ *status = (char)(le32_to_cpu(ra_inl(NFC_DATA)) & 0x0ff); ++ return 0; ++} ++ ++/** ++ * @return !0, chip protect. ++ * @return 0, chip not protected. ++ */ ++static int nfc_check_wp(void) ++{ ++ /* Check the WP bit */ ++#if !defined CONFIG_NOT_SUPPORT_WP ++ return !!(ra_inl(NFC_CTRL) & 0x01); ++#else ++ char result = 0; ++ int ret; ++ ++ ret = _nfc_read_status(&result); ++ //FIXME, if ret < 0 ++ ++ return !(result & NAND_STATUS_WP); ++#endif ++} ++ ++#if !defined CONFIG_NOT_SUPPORT_RB ++/* ++ * @return !0, chip ready. ++ * @return 0, chip busy. ++ */ ++static int nfc_device_ready(void) ++{ ++ /* Check the ready */ ++ return !!(ra_inl(NFC_STATUS) & 0x04); ++} ++#endif ++ ++ ++/** ++ * generic function to get data from flash. ++ * @return data length reading from flash. ++ */ ++static int _ra_nand_pull_data(char *buf, int len, int use_gdma) ++{ ++#ifdef RW_DATA_BY_BYTE ++ char *p = buf; ++#else ++ __u32 *p = (__u32 *)buf; ++#endif ++ int retry, int_st; ++ unsigned int ret_data; ++ int ret_size; ++ ++ // receive data by use_gdma ++ if (use_gdma) { ++ //if (_ra_nand_dma_pull((unsigned long)p, len)) { ++ if (1) { ++ printk("%s: fail \n", __func__); ++ len = -1; //return error ++ } ++ ++ return len; ++ } ++ ++ //fixme: retry count size? ++ retry = READ_STATUS_RETRY; ++ // no gdma ++ while (len > 0) { ++ int_st = ra_inl(NFC_INT_ST); ++ if (int_st & INT_ST_RX_BUF_RDY) { ++ ++ ret_data = ra_inl(NFC_DATA); ++ ra_outl(NFC_INT_ST, INT_ST_RX_BUF_RDY); ++#ifdef RW_DATA_BY_BYTE ++ ret_size = sizeof(unsigned int); ++ ret_size = min(ret_size, len); ++ len -= ret_size; ++ while (ret_size-- > 0) { ++ //nfc is little endian ++ *p++ = ret_data & 0x0ff; ++ ret_data >>= 8; ++ } ++#else ++ ret_size = min(len, 4); ++ len -= ret_size; ++ if (ret_size == 4) ++ *p++ = ret_data; ++ else { ++ __u8 *q = (__u8 *)p; ++ while (ret_size-- > 0) { ++ *q++ = ret_data & 0x0ff; ++ ret_data >>= 8; ++ } ++ p = (__u32 *)q; ++ } ++#endif ++ retry = READ_STATUS_RETRY; ++ } ++ else if (int_st & INT_ST_ND_DONE) { ++ break; ++ } ++ else { ++ udelay(1); ++ if (retry-- < 0) ++ break; ++ } ++ } ++ ++#ifdef RW_DATA_BY_BYTE ++ return (int)(p - buf); ++#else ++ return ((int)p - (int)buf); ++#endif ++} ++ ++/** ++ * generic function to put data into flash. ++ * @return data length writing into flash. ++ */ ++static int _ra_nand_push_data(char *buf, int len, int use_gdma) ++{ ++#ifdef RW_DATA_BY_BYTE ++ char *p = buf; ++#else ++ __u32 *p = (__u32 *)buf; ++#endif ++ int retry, int_st; ++ unsigned int tx_data = 0; ++ int tx_size, iter = 0; ++ ++ // receive data by use_gdma ++ if (use_gdma) { ++ //if (_ra_nand_dma_push((unsigned long)p, len)) ++ if (1) ++ len = 0; ++ printk("%s: fail \n", __func__); ++ return len; ++ } ++ ++ // no gdma ++ retry = READ_STATUS_RETRY; ++ while (len > 0) { ++ int_st = ra_inl(NFC_INT_ST); ++ if (int_st & INT_ST_TX_BUF_RDY) { ++#ifdef RW_DATA_BY_BYTE ++ tx_size = min(len, (int)sizeof(unsigned long)); ++ for (iter = 0; iter < tx_size; iter++) { ++ tx_data |= (*p++ << (8*iter)); ++ } ++#else ++ tx_size = min(len, 4); ++ if (tx_size == 4) ++ tx_data = (*p++); ++ else { ++ __u8 *q = (__u8 *)p; ++ for (iter = 0; iter < tx_size; iter++) ++ tx_data |= (*q++ << (8*iter)); ++ p = (__u32 *)q; ++ } ++#endif ++ ra_outl(NFC_INT_ST, INT_ST_TX_BUF_RDY); ++ ra_outl(NFC_DATA, tx_data); ++ len -= tx_size; ++ retry = READ_STATUS_RETRY; ++ } ++ else if (int_st & INT_ST_ND_DONE) { ++ break; ++ } ++ else { ++ udelay(1); ++ if (retry-- < 0) { ++ ra_dbg("%s p:%p buf:%p \n", __func__, p, buf); ++ break; ++ } ++ } ++ } ++ ++ ++#ifdef RW_DATA_BY_BYTE ++ return (int)(p - buf); ++#else ++ return ((int)p - (int)buf); ++#endif ++ ++} ++ ++static int nfc_select_chip(struct ra_nand_chip *ra, int chipnr) ++{ ++#if (CONFIG_NUMCHIPS == 1) ++ if (!(chipnr < CONFIG_NUMCHIPS)) ++ return -1; ++ return 0; ++#else ++ BUG(); ++#endif ++} ++ ++/** @return -1: chip_select fail ++ * 0 : both CE and WP==0 are OK ++ * 1 : CE OK and WP==1 ++ */ ++static int nfc_enable_chip(struct ra_nand_chip *ra, unsigned int offs, int read_only) ++{ ++ int chipnr = offs >> ra->chip_shift; ++ ++ ra_dbg("%s: offs:%x read_only:%x \n", __func__, offs, read_only); ++ ++ chipnr = nfc_select_chip(ra, chipnr); ++ if (chipnr < 0) { ++ printk("%s: chip select error, offs(%x)\n", __func__, offs); ++ return -1; ++ } ++ ++ if (!read_only) ++ return nfc_check_wp(); ++ ++ return 0; ++} ++ ++/** wait nand chip becomeing ready and return queried status. ++ * @param snooze: sleep time in ms unit before polling device ready. ++ * @return status of nand chip ++ * @return NAN_STATUS_FAIL if something unexpected. ++ */ ++static int nfc_wait_ready(int snooze_ms) ++{ ++ int retry; ++ char status; ++ ++ // wait nfc idle, ++ if (snooze_ms == 0) ++ snooze_ms = 1; ++ else ++ schedule_timeout(snooze_ms * HZ / 1000); ++ ++ snooze_ms = retry = snooze_ms *1000000 / 100 ; // ndelay(100) ++ ++ while (!NFC_TRANS_DONE() && retry--) { ++ if (!cond_resched()) ++ ndelay(100); ++ } ++ ++ if (!NFC_TRANS_DONE()) { ++ printk("nfc_wait_ready: no transaction done \n"); ++ return NAND_STATUS_FAIL; ++ } ++ ++#if !defined (CONFIG_NOT_SUPPORT_RB) ++ //fixme ++ while(!(status = nfc_device_ready()) && retry--) { ++ ndelay(100); ++ } ++ ++ if (status == 0) { ++ printk("nfc_wait_ready: no device ready. \n"); ++ return NAND_STATUS_FAIL; ++ } ++ ++ _nfc_read_status(&status); ++ return status; ++#else ++ ++ while(retry--) { ++ _nfc_read_status(&status); ++ if (status & NAND_STATUS_READY) ++ break; ++ ndelay(100); ++ } ++ if (retry<0) ++ printk("nfc_wait_ready 2: no device ready, status(%x). \n", status); ++ ++ return status; ++#endif ++} ++ ++/** ++ * return 0: erase OK ++ * return -EIO: fail ++ */ ++int nfc_erase_block(struct ra_nand_chip *ra, int row_addr) ++{ ++ unsigned long cmd1, cmd2, bus_addr, conf; ++ char status; ++ ++ cmd1 = 0x60; ++ cmd2 = 0xd0; ++ bus_addr = row_addr; ++ conf = 0x00511 | ((CFG_ROW_ADDR_CYCLE)<<16); ++ ++ // set NFC ++ ra_dbg("%s: cmd1: %lx, cmd2:%lx bus_addr: %lx, conf: %lx \n", ++ __func__, cmd1, cmd2, bus_addr, conf); ++ ++ //fixme, should we check nfc status? ++ CLEAR_INT_STATUS(); ++ ++ ra_outl(NFC_CMD1, cmd1); ++ ra_outl(NFC_CMD2, cmd2); ++ ra_outl(NFC_ADDR, bus_addr); ++ ra_outl(NFC_CONF, conf); ++ ++ status = nfc_wait_ready(3); //erase wait 3ms ++ if (status & NAND_STATUS_FAIL) { ++ printk("%s: fail \n", __func__); ++ return -EIO; ++ } ++ ++ return 0; ++ ++} ++ ++static inline int _nfc_read_raw_data(int cmd1, int cmd2, int bus_addr, int bus_addr2, int conf, char *buf, int len, int flags) ++{ ++ int ret; ++ ++ CLEAR_INT_STATUS(); ++ ra_outl(NFC_CMD1, cmd1); ++ ra_outl(NFC_CMD2, cmd2); ++ ra_outl(NFC_ADDR, bus_addr); ++#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) ++ ra_outl(NFC_ADDR2, bus_addr2); ++#endif ++ ra_outl(NFC_CONF, conf); ++ ++ ret = _ra_nand_pull_data(buf, len, 0); ++ if (ret != len) { ++ ra_dbg("%s: ret:%x (%x) \n", __func__, ret, len); ++ return NAND_STATUS_FAIL; ++ } ++ ++ //FIXME, this section is not necessary ++ ret = nfc_wait_ready(0); //wait ready ++ /* to prevent the DATA FIFO 's old data from next operation */ ++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer ++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer ++ ++ if (ret & NAND_STATUS_FAIL) { ++ printk("%s: fail \n", __func__); ++ return NAND_STATUS_FAIL; ++ } ++ ++ return 0; ++} ++ ++static inline int _nfc_write_raw_data(int cmd1, int cmd3, int bus_addr, int bus_addr2, int conf, char *buf, int len, int flags) ++{ ++ int ret; ++ ++ CLEAR_INT_STATUS(); ++ ra_outl(NFC_CMD1, cmd1); ++ ra_outl(NFC_CMD3, cmd3); ++ ra_outl(NFC_ADDR, bus_addr); ++#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) ++ ra_outl(NFC_ADDR2, bus_addr2); ++#endif ++ ra_outl(NFC_CONF, conf); ++ ++ ret = _ra_nand_push_data(buf, len, 0); ++ if (ret != len) { ++ ra_dbg("%s: ret:%x (%x) \n", __func__, ret, len); ++ return NAND_STATUS_FAIL; ++ } ++ ++ ret = nfc_wait_ready(1); //write wait 1ms ++ /* to prevent the DATA FIFO 's old data from next operation */ ++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x02); //clear data buffer ++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) & ~0x02); //clear data buffer ++ ++ if (ret & NAND_STATUS_FAIL) { ++ printk("%s: fail \n", __func__); ++ return NAND_STATUS_FAIL; ++ } ++ ++ return 0; ++} ++ ++/** ++ * @return !0: fail ++ * @return 0: OK ++ */ ++int nfc_read_oob(struct ra_nand_chip *ra, int page, unsigned int offs, char *buf, int len, int flags) ++{ ++ unsigned int cmd1 = 0, cmd2 = 0, conf = 0; ++ unsigned int bus_addr = 0, bus_addr2 = 0; ++ unsigned int ecc_en; ++ int use_gdma; ++ int status; ++ ++ int pages_perblock = 1<<(ra->erase_shift - ra->page_shift); ++ // constrain of nfc read function ++ ++#if defined (WORKAROUND_RX_BUF_OV) ++ BUG_ON (len > 60); //problem of rx-buffer overrun ++#endif ++ BUG_ON (offs >> ra->oob_shift); //page boundry ++ BUG_ON ((unsigned int)(((offs + len) >> ra->oob_shift) + page) > ++ ((page + pages_perblock) & ~(pages_perblock-1))); //block boundry ++ ++ use_gdma = flags & FLAG_USE_GDMA; ++ ecc_en = flags & FLAG_ECC_EN; ++ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8) - 1)); ++ ++ if (is_nand_page_2048) { ++ bus_addr += CFG_PAGESIZE; ++ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8); ++ cmd1 = 0x0; ++ cmd2 = 0x30; ++ conf = 0x000511| ((CFG_ADDR_CYCLE)<<16) | (len << 20); ++ } ++ else { ++ cmd1 = 0x50; ++ conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20); ++ } ++ if (ecc_en) ++ conf |= (1<<3); ++ if (use_gdma) ++ conf |= (1<<2); ++ ++ ra_dbg("%s: cmd1:%x, bus_addr:%x, conf:%x, len:%x, flag:%x\n", ++ __func__, cmd1, bus_addr, conf, len, flags); ++ ++ status = _nfc_read_raw_data(cmd1, cmd2, bus_addr, bus_addr2, conf, buf, len, flags); ++ if (status & NAND_STATUS_FAIL) { ++ printk("%s: fail\n", __func__); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++/** ++ * @return !0: fail ++ * @return 0: OK ++ */ ++int nfc_write_oob(struct ra_nand_chip *ra, int page, unsigned int offs, char *buf, int len, int flags) ++{ ++ unsigned int cmd1 = 0, cmd3=0, conf = 0; ++ unsigned int bus_addr = 0, bus_addr2 = 0; ++ int use_gdma; ++ int status; ++ ++ int pages_perblock = 1<<(ra->erase_shift - ra->page_shift); ++ // constrain of nfc read function ++ ++ BUG_ON (offs >> ra->oob_shift); //page boundry ++ BUG_ON ((unsigned int)(((offs + len) >> ra->oob_shift) + page) > ++ ((page + pages_perblock) & ~(pages_perblock-1))); //block boundry ++ ++ use_gdma = flags & FLAG_USE_GDMA; ++ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8) - 1)); ++ ++ if (is_nand_page_2048) { ++ cmd1 = 0x80; ++ cmd3 = 0x10; ++ bus_addr += CFG_PAGESIZE; ++ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8); ++ conf = 0x001123 | ((CFG_ADDR_CYCLE)<<16) | ((len) << 20); ++ } ++ else { ++ cmd1 = 0x08050; ++ cmd3 = 0x10; ++ conf = 0x001223 | ((CFG_ADDR_CYCLE)<<16) | ((len) << 20); ++ } ++ if (use_gdma) ++ conf |= (1<<2); ++ ++ // set NFC ++ ra_dbg("%s: cmd1: %x, cmd3: %x bus_addr: %x, conf: %x, len:%x\n", ++ __func__, cmd1, cmd3, bus_addr, conf, len); ++ ++ status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, len, flags); ++ if (status & NAND_STATUS_FAIL) { ++ printk("%s: fail \n", __func__); ++ return -EIO; ++ } ++ ++ return 0; ++} ++ ++ ++int nfc_read_page(struct ra_nand_chip *ra, char *buf, int page, int flags); ++int nfc_write_page(struct ra_nand_chip *ra, char *buf, int page, int flags); ++ ++ ++#if !defined (WORKAROUND_RX_BUF_OV) ++static int one_bit_correction(char *ecc, char *expected, int *bytes, int *bits); ++int nfc_ecc_verify(struct ra_nand_chip *ra, char *buf, int page, int mode) ++{ ++ int ret, i; ++ char *p, *e; ++ int ecc; ++ ++ //ra_dbg("%s, page:%x mode:%d\n", __func__, page, mode); ++ ++ if (mode == FL_WRITING) { ++ int len = CFG_PAGESIZE + CFG_PAGE_OOBSIZE; ++ int conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20); ++ conf |= (1<<3); //(ecc_en) ++ //conf |= (1<<2); // (use_gdma) ++ ++ p = ra->readback_buffers; ++ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_ECC_EN); ++ if (ret == 0) ++ goto ecc_check; ++ ++ //FIXME, double comfirm ++ printk("%s: read back fail, try again \n",__func__); ++ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_ECC_EN); ++ if (ret != 0) { ++ printk("\t%s: read back fail agian \n",__func__); ++ goto bad_block; ++ } ++ } ++ else if (mode == FL_READING) { ++ p = buf; ++ } ++ else ++ return -2; ++ ++ecc_check: ++ p += CFG_PAGESIZE; ++ if (!is_nand_page_2048) { ++ ecc = ra_inl(NFC_ECC); ++ if (ecc == 0) //clean page. ++ return 0; ++ e = (char*)&ecc; ++ for (i=0; i<CONFIG_ECC_BYTES; i++) { ++ int eccpos = CONFIG_ECC_OFFSET + i; ++ if (*(p + eccpos) != (char)0xff) ++ break; ++ if (i == CONFIG_ECC_BYTES - 1) { ++ printk("skip ecc 0xff at page %x\n", page); ++ return 0; ++ } ++ } ++ for (i=0; i<CONFIG_ECC_BYTES; i++) { ++ int eccpos = CONFIG_ECC_OFFSET + i; ++ if (*(p + eccpos) != *(e + i)) { ++ printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, ecc:%x \n", ++ __func__, (mode == FL_READING)?"read":"write", page, ++ *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc); ++ return -1; ++ } ++ } ++ } ++#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) ++ else { ++ int ecc2, ecc3, ecc4, qsz; ++ char *e2, *e3, *e4; ++ int correction_flag = 0; ++ ecc = ra_inl(NFC_ECC_P1); ++ ecc2 = ra_inl(NFC_ECC_P2); ++ ecc3 = ra_inl(NFC_ECC_P3); ++ ecc4 = ra_inl(NFC_ECC_P4); ++ e = (char*)&ecc; ++ e2 = (char*)&ecc2; ++ e3 = (char*)&ecc3; ++ e4 = (char*)&ecc4; ++ qsz = CFG_PAGE_OOBSIZE / 4; ++ if (ecc == 0 && ecc2 == 0 && ecc3 == 0 && ecc4 == 0) ++ return 0; ++ for (i=0; i<CONFIG_ECC_BYTES; i++) { ++ int eccpos = CONFIG_ECC_OFFSET + i; ++ if (*(p + eccpos) != (char)0xff) ++ break; ++ else if (*(p + eccpos + qsz) != (char)0xff) ++ break; ++ else if (*(p + eccpos + qsz*2) != (char)0xff) ++ break; ++ else if (*(p + eccpos + qsz*3) != (char)0xff) ++ break; ++ if (i == CONFIG_ECC_BYTES - 1) { ++ printk("skip ecc 0xff at page %x\n", page); ++ return 0; ++ } ++ } ++ for (i=0; i<CONFIG_ECC_BYTES; i++) { ++ int eccpos = CONFIG_ECC_OFFSET + i; ++ if (*(p + eccpos) != *(e + i)) { ++ printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, ecc:%x \n", ++ __func__, (mode == FL_READING)?"read":"write", page, ++ *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc); ++ correction_flag |= 0x1; ++ } ++ if (*(p + eccpos + qsz) != *(e2 + i)) { ++ printk("%s mode:%s, invalid ecc2, page: %x read:%x %x %x, ecc2:%x \n", ++ __func__, (mode == FL_READING)?"read":"write", page, ++ *(p+CONFIG_ECC_OFFSET+qsz), *(p+ CONFIG_ECC_OFFSET+1+qsz), *(p+ CONFIG_ECC_OFFSET+2+qsz), ecc2); ++ correction_flag |= 0x2; ++ } ++ if (*(p + eccpos + qsz*2) != *(e3 + i)) { ++ printk("%s mode:%s, invalid ecc3, page: %x read:%x %x %x, ecc3:%x \n", ++ __func__, (mode == FL_READING)?"read":"write", page, ++ *(p+CONFIG_ECC_OFFSET+qsz*2), *(p+ CONFIG_ECC_OFFSET+1+qsz*2), *(p+ CONFIG_ECC_OFFSET+2+qsz*2), ecc3); ++ correction_flag |= 0x4; ++ } ++ if (*(p + eccpos + qsz*3) != *(e4 + i)) { ++ printk("%s mode:%s, invalid ecc4, page: %x read:%x %x %x, ecc4:%x \n", ++ __func__, (mode == FL_READING)?"read":"write", page, ++ *(p+CONFIG_ECC_OFFSET+qsz*3), *(p+ CONFIG_ECC_OFFSET+1+qsz*3), *(p+ CONFIG_ECC_OFFSET+2+qsz*3), ecc4); ++ correction_flag |= 0x8; ++ } ++ } ++ ++ if (correction_flag) ++ { ++ printk("trying to do correction!\n"); ++ if (correction_flag & 0x1) ++ { ++ int bytes, bits; ++ char *pBuf = p - CFG_PAGESIZE; ++ ++ if (one_bit_correction(p + CONFIG_ECC_OFFSET, e, &bytes, &bits) == 0) ++ { ++ pBuf[bytes] = pBuf[bytes] ^ (1 << bits); ++ printk("1. correct byte %d, bit %d!\n", bytes, bits); ++ } ++ else ++ { ++ printk("failed to correct!\n"); ++ return -1; ++ } ++ } ++ ++ if (correction_flag & 0x2) ++ { ++ int bytes, bits; ++ char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE/4; ++ ++ if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz), e2, &bytes, &bits) == 0) ++ { ++ pBuf[bytes] = pBuf[bytes] ^ (1 << bits); ++ printk("2. correct byte %d, bit %d!\n", bytes, bits); ++ } ++ else ++ { ++ printk("failed to correct!\n"); ++ return -1; ++ } ++ } ++ if (correction_flag & 0x4) ++ { ++ int bytes, bits; ++ char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE/2; ++ ++ if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz * 2), e3, &bytes, &bits) == 0) ++ { ++ pBuf[bytes] = pBuf[bytes] ^ (1 << bits); ++ printk("3. correct byte %d, bit %d!\n", bytes, bits); ++ } ++ else ++ { ++ printk("failed to correct!\n"); ++ return -1; ++ } ++ } ++ if (correction_flag & 0x8) ++ { ++ int bytes, bits; ++ char *pBuf = (p - CFG_PAGESIZE) + CFG_PAGESIZE*3/4; ++ ++ if (one_bit_correction((p + CONFIG_ECC_OFFSET + qsz * 3), e4, &bytes, &bits) == 0) ++ { ++ pBuf[bytes] = pBuf[bytes] ^ (1 << bits); ++ printk("4. correct byte %d, bit %d!\n", bytes, bits); ++ } ++ else ++ { ++ printk("failed to correct!\n"); ++ return -1; ++ } ++ } ++ } ++ ++ } ++#endif ++ return 0; ++ ++bad_block: ++ return -1; ++} ++ ++#else ++ ++void ranfc_dump(void) ++{ ++ int i; ++ for (i=0; i<11; i++) { ++ if (i==6) ++ continue; ++ printk("%x: %x \n", NFC_BASE + i*4, ra_inl(NFC_BASE + i*4)); ++ } ++} ++ ++/** ++ * @return 0, ecc OK or corrected. ++ * @return NAND_STATUS_FAIL, ecc fail. ++ */ ++ ++int nfc_ecc_verify(struct ra_nand_chip *ra, char *buf, int page, int mode) ++{ ++ int ret, i; ++ char *p, *e; ++ int ecc; ++ ++ if (ranfc_verify == 0) ++ return 0; ++ ++ ra_dbg("%s, page:%x mode:%d\n", __func__, page, mode); ++ ++ if (mode == FL_WRITING) { // read back and memcmp ++ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_NONE); ++ if (ret != 0) //double comfirm ++ ret = nfc_read_page(ra, ra->readback_buffers, page, FLAG_NONE); ++ ++ if (ret != 0) { ++ printk("%s: mode:%x read back fail \n", __func__, mode); ++ return -1; ++ } ++ return memcmp(buf, ra->readback_buffers, 1<<ra->page_shift); ++ } ++ ++ if (mode == FL_READING) { ++#if 0 ++ if (ra->sandbox_page == 0) ++ return 0; ++ ++ ret = nfc_write_page(ra, buf, ra->sandbox_page, FLAG_USE_GDMA | FLAG_ECC_EN); ++ if (ret != 0) { ++ printk("%s, fail write sandbox_page \n", __func__); ++ return -1; ++ } ++#else ++ /** @note: ++ * The following command is actually not 'write' command to drive NFC to write flash. ++ * However, it can make NFC to calculate ECC, that will be used to compare with original ones. ++ * --YT ++ */ ++ unsigned int conf = 0x001223| (CFG_ADDR_CYCLE<<16) | (0x200 << 20) | (1<<3) | (1<<2); ++ _nfc_write_raw_data(0xff, 0xff, ra->sandbox_page<<ra->page_shift, conf, buf, 0x200, FLAG_USE_GDMA); ++#endif ++ ++ ecc = ra_inl(NFC_ECC); ++ if (ecc == 0) //clean page. ++ return 0; ++ e = (char*)&ecc; ++ p = buf + (1<<ra->page_shift); ++ for (i=0; i<CONFIG_ECC_BYTES; i++) { ++ int eccpos = CONFIG_ECC_OFFSET + i; ++ if (*(p + eccpos) != *(e + i)) { ++ printk("%s mode:%s, invalid ecc, page: %x read:%x %x %x, write:%x \n", ++ __func__, (mode == FL_READING)?"read":"write", page, ++ *(p+ CONFIG_ECC_OFFSET), *(p+ CONFIG_ECC_OFFSET+1), *(p+ CONFIG_ECC_OFFSET +2), ecc); ++ ++ for (i=0; i<528; i++) ++ printk("%-2x \n", *(buf + i)); ++ return -1; ++ } ++ } ++ return 0; ++ } ++ ++ return -1; ++ ++} ++ ++#endif ++ ++ ++/** ++ * @return -EIO, writing size is less than a page ++ * @return 0, OK ++ */ ++int nfc_read_page(struct ra_nand_chip *ra, char *buf, int page, int flags) ++{ ++ unsigned int cmd1 = 0, cmd2 = 0, conf = 0; ++ unsigned int bus_addr = 0, bus_addr2 = 0; ++ unsigned int ecc_en; ++ int use_gdma; ++ int size, offs; ++ int status = 0; ++ ++ use_gdma = flags & FLAG_USE_GDMA; ++ ecc_en = flags & FLAG_ECC_EN; ++ ++ page = page & (CFG_CHIPSIZE - 1); // chip boundary ++ size = CFG_PAGESIZE + CFG_PAGE_OOBSIZE; //add oobsize ++ offs = 0; ++ ++ while (size > 0) { ++ int len; ++#if defined (WORKAROUND_RX_BUF_OV) ++ len = min(60, size); ++#else ++ len = size; ++#endif ++ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)) | (offs & ((1<<CFG_COLUMN_ADDR_CYCLE*8)-1)); ++ if (is_nand_page_2048) { ++ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8); ++ cmd1 = 0x0; ++ cmd2 = 0x30; ++ conf = 0x000511| ((CFG_ADDR_CYCLE)<<16) | (len << 20); ++ } ++ else { ++ if (offs & ~(CFG_PAGESIZE-1)) ++ cmd1 = 0x50; ++ else if (offs & ~((1<<CFG_COLUMN_ADDR_CYCLE*8)-1)) ++ cmd1 = 0x01; ++ else ++ cmd1 = 0; ++ ++ conf = 0x000141| ((CFG_ADDR_CYCLE)<<16) | (len << 20); ++ } ++#if !defined (WORKAROUND_RX_BUF_OV) ++ if (ecc_en) ++ conf |= (1<<3); ++#endif ++ if (use_gdma) ++ conf |= (1<<2); ++ ++ status = _nfc_read_raw_data(cmd1, cmd2, bus_addr, bus_addr2, conf, buf+offs, len, flags); ++ if (status & NAND_STATUS_FAIL) { ++ printk("%s: fail \n", __func__); ++ return -EIO; ++ } ++ ++ offs += len; ++ size -= len; ++ } ++ ++ // verify and correct ecc ++ if ((flags & (FLAG_VERIFY | FLAG_ECC_EN)) == (FLAG_VERIFY | FLAG_ECC_EN)) { ++ status = nfc_ecc_verify(ra, buf, page, FL_READING); ++ if (status != 0) { ++ printk("%s: fail, buf:%x, page:%x, flag:%x\n", ++ __func__, (unsigned int)buf, page, flags); ++ return -EBADMSG; ++ } ++ } ++ else { ++ // fix,e not yet support ++ ra->buffers_page = -1; //cached ++ } ++ ++ return 0; ++} ++ ++ ++/** ++ * @return -EIO, fail to write ++ * @return 0, OK ++ */ ++int nfc_write_page(struct ra_nand_chip *ra, char *buf, int page, int flags) ++{ ++ unsigned int cmd1 = 0, cmd3, conf = 0; ++ unsigned int bus_addr = 0, bus_addr2 = 0; ++ unsigned int ecc_en; ++ int use_gdma; ++ int size; ++ char status; ++ uint8_t *oob = buf + (1<<ra->page_shift); ++ ++ use_gdma = flags & FLAG_USE_GDMA; ++ ecc_en = flags & FLAG_ECC_EN; ++ ++ oob[ra->badblockpos] = 0xff; //tag as good block. ++ ra->buffers_page = -1; //cached ++ ++ page = page & (CFG_CHIPSIZE-1); //chip boundary ++ size = CFG_PAGESIZE + CFG_PAGE_OOBSIZE; //add oobsize ++ bus_addr = (page << (CFG_COLUMN_ADDR_CYCLE*8)); //write_page always write from offset 0. ++ ++ if (is_nand_page_2048) { ++ bus_addr2 = page >> (CFG_COLUMN_ADDR_CYCLE*8); ++ cmd1 = 0x80; ++ cmd3 = 0x10; ++ conf = 0x001123| ((CFG_ADDR_CYCLE)<<16) | (size << 20); ++ } ++ else { ++ cmd1 = 0x8000; ++ cmd3 = 0x10; ++ conf = 0x001223| ((CFG_ADDR_CYCLE)<<16) | (size << 20); ++} ++ if (ecc_en) ++ conf |= (1<<3); //enable ecc ++ if (use_gdma) ++ conf |= (1<<2); ++ ++ // set NFC ++ ra_dbg("nfc_write_page: cmd1: %x, cmd3: %x bus_addr: %x, conf: %x, len:%x\n", ++ cmd1, cmd3, bus_addr, conf, size); ++ ++ status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, size, flags); ++ if (status & NAND_STATUS_FAIL) { ++ printk("%s: fail \n", __func__); ++ return -EIO; ++ } ++ ++ ++ if (flags & FLAG_VERIFY) { // verify and correct ecc ++ status = nfc_ecc_verify(ra, buf, page, FL_WRITING); ++ ++#ifdef RANDOM_GEN_BAD_BLOCK ++ if (((random32() & 0x1ff) == 0x0) && (page >= 0x100)) // randomly create bad block ++ { ++ printk("hmm... create a bad block at page %x\n", (bus_addr >> 16)); ++ status = -1; ++ } ++#endif ++ ++ if (status != 0) { ++ printk("%s: ecc_verify fail: ret:%x \n", __func__, status); ++ oob[ra->badblockpos] = 0x33; ++ page -= page % (CFG_BLOCKSIZE/CFG_PAGESIZE); ++ printk("create a bad block at page %x\n", page); ++ if (!is_nand_page_2048) ++ status = nfc_write_oob(ra, page, ra->badblockpos, oob+ra->badblockpos, 1, flags); ++ else ++ { ++ status = _nfc_write_raw_data(cmd1, cmd3, bus_addr, bus_addr2, conf, buf, size, flags); ++ nfc_write_oob(ra, page, 0, oob, 16, FLAG_NONE); ++ } ++ return -EBADMSG; ++ } ++ } ++ ++ ++ ra->buffers_page = page; //cached ++ return 0; ++} ++ ++ ++ ++/************************************************************* ++ * nand internal process ++ *************************************************************/ ++ ++/** ++ * nand_release_device - [GENERIC] release chip ++ * @mtd: MTD device structure ++ * ++ * Deselect, release chip lock and wake up anyone waiting on the device ++ */ ++static void nand_release_device(struct ra_nand_chip *ra) ++{ ++ /* De-select the NAND device */ ++ nfc_select_chip(ra, -1); ++ ++ /* Release the controller and the chip */ ++ ra->state = FL_READY; ++ ++ mutex_unlock(ra->controller); ++} ++ ++/** ++ * nand_get_device - [GENERIC] Get chip for selected access ++ * @chip: the nand chip descriptor ++ * @mtd: MTD device structure ++ * @new_state: the state which is requested ++ * ++ * Get the device and lock it for exclusive access ++ */ ++static int ++nand_get_device(struct ra_nand_chip *ra, int new_state) ++{ ++ int ret = 0; ++ ++ ret = mutex_lock_interruptible(ra->controller); ++ if (!ret) ++ ra->state = new_state; ++ ++ return ret; ++ ++} ++ ++ ++ ++/************************************************************* ++ * nand internal process ++ *************************************************************/ ++ ++int nand_bbt_get(struct ra_nand_chip *ra, int block) ++{ ++ int byte, bits; ++ bits = block * BBTTAG_BITS; ++ ++ byte = bits / 8; ++ bits = bits % 8; ++ ++ return (ra->bbt[byte] >> bits) & BBTTAG_BITS_MASK; ++} ++ ++int nand_bbt_set(struct ra_nand_chip *ra, int block, int tag) ++{ ++ int byte, bits; ++ bits = block * BBTTAG_BITS; ++ ++ byte = bits / 8; ++ bits = bits % 8; ++ ++ // If previous tag is bad, dont overwrite it ++ if (((ra->bbt[byte] >> bits) & BBTTAG_BITS_MASK) == BBT_TAG_BAD) ++ { ++ return BBT_TAG_BAD; ++ } ++ ++ ra->bbt[byte] = (ra->bbt[byte] & ~(BBTTAG_BITS_MASK << bits)) | ((tag & BBTTAG_BITS_MASK) << bits); ++ ++ return tag; ++} ++ ++/** ++ * nand_block_checkbad - [GENERIC] Check if a block is marked bad ++ * @mtd: MTD device structure ++ * @ofs: offset from device start ++ * ++ * Check, if the block is bad. Either by reading the bad block table or ++ * calling of the scan function. ++ */ ++int nand_block_checkbad(struct ra_nand_chip *ra, loff_t offs) ++{ ++ int page, block; ++ int ret = 4; ++ unsigned int tag; ++ char *str[]= {"UNK", "RES", "BAD", "GOOD"}; ++ ++ if (ranfc_bbt == 0) ++ return 0; ++ ++ { ++ // align with chip ++ ++ offs = offs & ((1<<ra->chip_shift) -1); ++ ++ page = offs >> ra->page_shift; ++ block = offs >> ra->erase_shift; ++ } ++ ++ tag = nand_bbt_get(ra, block); ++ ++ if (tag == BBT_TAG_UNKNOWN) { ++ ret = nfc_read_oob(ra, page, ra->badblockpos, (char*)&tag, 1, FLAG_NONE); ++ if (ret == 0) ++ tag = ((le32_to_cpu(tag) & 0x0ff) == 0x0ff) ? BBT_TAG_GOOD : BBT_TAG_BAD; ++ else ++ tag = BBT_TAG_BAD; ++ ++ nand_bbt_set(ra, block, tag); ++ } ++ ++ if (tag != BBT_TAG_GOOD) { ++ printk("%s: offs:%x tag: %s \n", __func__, (unsigned int)offs, str[tag]); ++ return 1; ++ } ++ else ++ return 0; ++ ++} ++ ++ ++ ++/** ++ * nand_block_markbad - ++ */ ++int nand_block_markbad(struct ra_nand_chip *ra, loff_t offs) ++{ ++ int page, block; ++ int ret = 4; ++ unsigned int tag; ++ char *ecc; ++ ++ // align with chip ++ ra_dbg("%s offs: %x \n", __func__, (int)offs); ++ ++ offs = offs & ((1<<ra->chip_shift) -1); ++ ++ page = offs >> ra->page_shift; ++ block = offs >> ra->erase_shift; ++ ++ tag = nand_bbt_get(ra, block); ++ ++ if (tag == BBT_TAG_BAD) { ++ printk("%s: mark repeatedly \n", __func__); ++ return 0; ++ } ++ ++ // new tag as bad ++ tag =BBT_TAG_BAD; ++ ret = nfc_read_page(ra, ra->buffers, page, FLAG_NONE); ++ if (ret != 0) { ++ printk("%s: fail to read bad block tag \n", __func__); ++ goto tag_bbt; ++ } ++ ++ ecc = &ra->buffers[(1<<ra->page_shift)+ra->badblockpos]; ++ if (*ecc == (char)0x0ff) { ++ //tag into flash ++ *ecc = (char)tag; ++ ret = nfc_write_page(ra, ra->buffers, page, FLAG_USE_GDMA); ++ if (ret) ++ printk("%s: fail to write bad block tag \n", __func__); ++ ++ } ++ ++tag_bbt: ++ //update bbt ++ nand_bbt_set(ra, block, tag); ++ ++ return 0; ++} ++ ++ ++#if defined (WORKAROUND_RX_BUF_OV) ++/** ++ * to find a bad block for ecc verify of read_page ++ */ ++unsigned int nand_bbt_find_sandbox(struct ra_nand_chip *ra) ++{ ++ loff_t offs = 0; ++ int chipsize = 1 << ra->chip_shift; ++ int blocksize = 1 << ra->erase_shift; ++ ++ ++ while (offs < chipsize) { ++ if (nand_block_checkbad(ra, offs)) //scan and verify the unknown tag ++ break; ++ offs += blocksize; ++ } ++ ++ if (offs >= chipsize) { ++ offs = chipsize - blocksize; ++ } ++ ++ nand_bbt_set(ra, (unsigned int)offs>>ra->erase_shift, BBT_TAG_RES); // tag bbt only, instead of update badblockpos of flash. ++ return (offs >> ra->page_shift); ++} ++#endif ++ ++ ++ ++/** ++ * nand_erase_nand - [Internal] erase block(s) ++ * @mtd: MTD device structure ++ * @instr: erase instruction ++ * @allowbbt: allow erasing the bbt area ++ * ++ * Erase one ore more blocks ++ */ ++int _nand_erase_nand(struct ra_nand_chip *ra, struct erase_info *instr) ++{ ++ int page, len, status, ret; ++ unsigned int addr, blocksize = 1<<ra->erase_shift; ++ ++ ra_dbg("%s: start:%x, len:%x \n", __func__, ++ (unsigned int)instr->addr, (unsigned int)instr->len); ++ ++//#define BLOCK_ALIGNED(a) ((a) & (blocksize - 1)) // already defined ++ ++ if (BLOCK_ALIGNED(instr->addr) || BLOCK_ALIGNED(instr->len)) { ++ ra_dbg("%s: erase block not aligned, addr:%x len:%x\n", __func__, instr->addr, instr->len); ++ return -EINVAL; ++ } ++ ++ instr->fail_addr = 0xffffffff; ++ ++ len = instr->len; ++ addr = instr->addr; ++ instr->state = MTD_ERASING; ++ ++ while (len) { ++ ++ page = (int)(addr >> ra->page_shift); ++ ++ /* select device and check wp */ ++ if (nfc_enable_chip(ra, addr, 0)) { ++ printk("%s: nand is write protected \n", __func__); ++ instr->state = MTD_ERASE_FAILED; ++ goto erase_exit; ++ } ++ ++ /* if we have a bad block, we do not erase bad blocks */ ++ if (nand_block_checkbad(ra, addr)) { ++ printk(KERN_WARNING "nand_erase: attempt to erase a " ++ "bad block at 0x%08x\n", addr); ++ instr->state = MTD_ERASE_FAILED; ++ goto erase_exit; ++ } ++ ++ /* ++ * Invalidate the page cache, if we erase the block which ++ * contains the current cached page ++ */ ++ if (BLOCK_ALIGNED(addr) == BLOCK_ALIGNED(ra->buffers_page << ra->page_shift)) ++ ra->buffers_page = -1; ++ ++ status = nfc_erase_block(ra, page); ++ /* See if block erase succeeded */ ++ if (status) { ++ printk("%s: failed erase, page 0x%08x\n", __func__, page); ++ instr->state = MTD_ERASE_FAILED; ++ instr->fail_addr = (page << ra->page_shift); ++ goto erase_exit; ++ } ++ ++ ++ /* Increment page address and decrement length */ ++ len -= blocksize; ++ addr += blocksize; ++ ++ } ++ instr->state = MTD_ERASE_DONE; ++ ++erase_exit: ++ ++ ret = ((instr->state == MTD_ERASE_DONE) ? 0 : -EIO); ++ /* Do call back function */ ++ if (!ret) ++ mtd_erase_callback(instr); ++ ++ if (ret) { ++ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD); ++ } ++ ++ /* Return more or less happy */ ++ return ret; ++} ++ ++static int ++nand_write_oob_buf(struct ra_nand_chip *ra, uint8_t *buf, uint8_t *oob, size_t size, ++ int mode, int ooboffs) ++{ ++ size_t oobsize = 1<<ra->oob_shift; ++ struct nand_oobfree *free; ++ uint32_t woffs = ooboffs; ++ int retsize = 0; ++ ++ ra_dbg("%s: size:%x, mode:%x, offs:%x \n", __func__, size, mode, ooboffs); ++ ++ switch(mode) { ++ case MTD_OPS_PLACE_OOB: ++ case MTD_OPS_RAW: ++ if (ooboffs > oobsize) ++ return -1; ++ ++ size = min(size, oobsize - ooboffs); ++ memcpy(buf + ooboffs, oob, size); ++ retsize = size; ++ break; ++ ++ case MTD_OPS_AUTO_OOB: ++ if (ooboffs > ra->oob->oobavail) ++ return -1; ++ ++ while (size) { ++ for(free = ra->oob->oobfree; free->length && size; free++) { ++ int wlen = free->length - woffs; ++ int bytes = 0; ++ ++ /* Write request not from offset 0 ? */ ++ if (wlen <= 0) { ++ woffs = -wlen; ++ continue; ++ } ++ ++ bytes = min_t(size_t, size, wlen); ++ memcpy (buf + free->offset + woffs, oob, bytes); ++ woffs = 0; ++ oob += bytes; ++ size -= bytes; ++ retsize += bytes; ++ } ++ buf += oobsize; ++ } ++ break; ++ ++ default: ++ BUG(); ++ } ++ ++ return retsize; ++} ++ ++static int nand_read_oob_buf(struct ra_nand_chip *ra, uint8_t *oob, size_t size, ++ int mode, int ooboffs) ++{ ++ size_t oobsize = 1<<ra->oob_shift; ++ uint8_t *buf = ra->buffers + (1<<ra->page_shift); ++ int retsize=0; ++ ++ ra_dbg("%s: size:%x, mode:%x, offs:%x \n", __func__, size, mode, ooboffs); ++ ++ switch(mode) { ++ case MTD_OPS_PLACE_OOB: ++ case MTD_OPS_RAW: ++ if (ooboffs > oobsize) ++ return -1; ++ ++ size = min(size, oobsize - ooboffs); ++ memcpy(oob, buf + ooboffs, size); ++ return size; ++ ++ case MTD_OPS_AUTO_OOB: { ++ struct nand_oobfree *free; ++ uint32_t woffs = ooboffs; ++ ++ if (ooboffs > ra->oob->oobavail) ++ return -1; ++ ++ size = min(size, ra->oob->oobavail - ooboffs); ++ for(free = ra->oob->oobfree; free->length && size; free++) { ++ int wlen = free->length - woffs; ++ int bytes = 0; ++ ++ /* Write request not from offset 0 ? */ ++ if (wlen <= 0) { ++ woffs = -wlen; ++ continue; ++ } ++ ++ bytes = min_t(size_t, size, wlen); ++ memcpy (oob, buf + free->offset + woffs, bytes); ++ woffs = 0; ++ oob += bytes; ++ size -= bytes; ++ retsize += bytes; ++ } ++ return retsize; ++ } ++ default: ++ BUG(); ++ } ++ ++ return -1; ++} ++ ++/** ++ * nand_do_write_ops - [Internal] NAND write with ECC ++ * @mtd: MTD device structure ++ * @to: offset to write to ++ * @ops: oob operations description structure ++ * ++ * NAND write with ECC ++ */ ++static int nand_do_write_ops(struct ra_nand_chip *ra, loff_t to, ++ struct mtd_oob_ops *ops) ++{ ++ int page; ++ uint32_t datalen = ops->len; ++ uint32_t ooblen = ops->ooblen; ++ uint8_t *oob = ops->oobbuf; ++ uint8_t *data = ops->datbuf; ++ int pagesize = (1<<ra->page_shift); ++ int pagemask = (pagesize -1); ++ int oobsize = 1<<ra->oob_shift; ++ loff_t addr = to; ++ //int i = 0; //for ra_dbg only ++ ++ ra_dbg("%s: to:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x oobmode:%x \n", ++ __func__, (unsigned int)to, data, oob, datalen, ooblen, ops->ooboffs, ops->mode); ++ ++ ops->retlen = 0; ++ ops->oobretlen = 0; ++ ++ ++ /* Invalidate the page cache, when we write to the cached page */ ++ ra->buffers_page = -1; ++ ++ ++ if (data ==0) ++ datalen = 0; ++ ++ // oob sequential (burst) write ++ if (datalen == 0 && ooblen) { ++ int len = ((ooblen + ops->ooboffs) + (ra->oob->oobavail - 1)) / ra->oob->oobavail * oobsize; ++ ++ /* select chip, and check if it is write protected */ ++ if (nfc_enable_chip(ra, addr, 0)) ++ return -EIO; ++ ++ //FIXME, need sanity check of block boundary ++ page = (int)((to & ((1<<ra->chip_shift)-1)) >> ra->page_shift); //chip boundary ++ memset(ra->buffers, 0x0ff, pagesize); ++ //fixme, should we reserve the original content? ++ if (ops->mode == MTD_OPS_AUTO_OOB) { ++ nfc_read_oob(ra, page, 0, ra->buffers, len, FLAG_NONE); ++ } ++ //prepare buffers ++ if (ooblen != 8) ++ { ++ nand_write_oob_buf(ra, ra->buffers, oob, ooblen, ops->mode, ops->ooboffs); ++ // write out buffer to chip ++ nfc_write_oob(ra, page, 0, ra->buffers, len, FLAG_USE_GDMA); ++ } ++ ++ ops->oobretlen = ooblen; ++ ooblen = 0; ++ } ++ ++ // data sequential (burst) write ++ if (datalen && ooblen == 0) { ++ // ranfc can not support write_data_burst, since hw-ecc and fifo constraints.. ++ } ++ ++ // page write ++ while(datalen || ooblen) { ++ int len; ++ int ret; ++ int offs; ++ int ecc_en = 0; ++ ++ ra_dbg("%s (%d): addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n", ++ __func__, i++, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs); ++ ++ page = (int)((addr & ((1<<ra->chip_shift)-1)) >> ra->page_shift); //chip boundary ++ ++ /* select chip, and check if it is write protected */ ++ if (nfc_enable_chip(ra, addr, 0)) ++ return -EIO; ++ ++ // oob write ++ if (ops->mode == MTD_OPS_AUTO_OOB) { ++ //fixme, this path is not yet varified ++ nfc_read_oob(ra, page, 0, ra->buffers + pagesize, oobsize, FLAG_NONE); ++ } ++ if (oob && ooblen > 0) { ++ len = nand_write_oob_buf(ra, ra->buffers + pagesize, oob, ooblen, ops->mode, ops->ooboffs); ++ if (len < 0) ++ return -EINVAL; ++ ++ oob += len; ++ ops->oobretlen += len; ++ ooblen -= len; ++ } ++ ++ // data write ++ offs = addr & pagemask; ++ len = min_t(size_t, datalen, pagesize - offs); ++ if (data && len > 0) { ++ memcpy(ra->buffers + offs, data, len); // we can not sure ops->buf wether is DMA-able. ++ ++ data += len; ++ datalen -= len; ++ ops->retlen += len; ++ ++ ecc_en = FLAG_ECC_EN; ++ } ++ ret = nfc_write_page(ra, ra->buffers, page, FLAG_USE_GDMA | FLAG_VERIFY | ++ ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0 : ecc_en )); ++ if (ret) { ++ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD); ++ return ret; ++ } ++ ++ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_GOOD); ++ ++ addr = (page+1) << ra->page_shift; ++ ++ } ++ return 0; ++} ++ ++/** ++ * nand_do_read_ops - [Internal] Read data with ECC ++ * ++ * @mtd: MTD device structure ++ * @from: offset to read from ++ * @ops: oob ops structure ++ * ++ * Internal function. Called with chip held. ++ */ ++static int nand_do_read_ops(struct ra_nand_chip *ra, loff_t from, ++ struct mtd_oob_ops *ops) ++{ ++ int page; ++ uint32_t datalen = ops->len; ++ uint32_t ooblen = ops->ooblen; ++ uint8_t *oob = ops->oobbuf; ++ uint8_t *data = ops->datbuf; ++ int pagesize = (1<<ra->page_shift); ++ int pagemask = (pagesize -1); ++ loff_t addr = from; ++ //int i = 0; //for ra_dbg only ++ ++ ra_dbg("%s: addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n", ++ __func__, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs); ++ ++ ops->retlen = 0; ++ ops->oobretlen = 0; ++ if (data == 0) ++ datalen = 0; ++ ++ ++ while(datalen || ooblen) { ++ int len; ++ int ret; ++ int offs; ++ ++ ra_dbg("%s (%d): addr:%x, ops data:%p, oob:%p datalen:%x ooblen:%x, ooboffs:%x \n", ++ __func__, i++, (unsigned int)addr, data, oob, datalen, ooblen, ops->ooboffs); ++ /* select chip */ ++ if (nfc_enable_chip(ra, addr, 1) < 0) ++ return -EIO; ++ ++ page = (int)((addr & ((1<<ra->chip_shift)-1)) >> ra->page_shift); ++ ++ ret = nfc_read_page(ra, ra->buffers, page, FLAG_VERIFY | ++ ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0: FLAG_ECC_EN )); ++ //FIXME, something strange here, some page needs 2 more tries to guarantee read success. ++ if (ret) { ++ printk("read again:\n"); ++ ret = nfc_read_page(ra, ra->buffers, page, FLAG_VERIFY | ++ ((ops->mode == MTD_OPS_RAW || ops->mode == MTD_OPS_PLACE_OOB) ? 0: FLAG_ECC_EN )); ++ ++ if (ret) { ++ printk("read again fail \n"); ++ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_BAD); ++ if ((ret != -EUCLEAN) && (ret != -EBADMSG)) { ++ return ret; ++ } ++ else { ++ /* ecc verification fail, but data need to be returned. */ ++ } ++ } ++ else { ++ printk(" read agian susccess \n"); ++ } ++ } ++ ++ // oob read ++ if (oob && ooblen > 0) { ++ len = nand_read_oob_buf(ra, oob, ooblen, ops->mode, ops->ooboffs); ++ if (len < 0) { ++ printk("nand_read_oob_buf: fail return %x \n", len); ++ return -EINVAL; ++ } ++ ++ oob += len; ++ ops->oobretlen += len; ++ ooblen -= len; ++ } ++ ++ // data read ++ offs = addr & pagemask; ++ len = min_t(size_t, datalen, pagesize - offs); ++ if (data && len > 0) { ++ memcpy(data, ra->buffers + offs, len); // we can not sure ops->buf wether is DMA-able. ++ ++ data += len; ++ datalen -= len; ++ ops->retlen += len; ++ if (ret) ++ return ret; ++ } ++ ++ ++ nand_bbt_set(ra, addr >> ra->erase_shift, BBT_TAG_GOOD); ++ // address go further to next page, instead of increasing of length of write. This avoids some special cases wrong. ++ addr = (page+1) << ra->page_shift; ++ } ++ return 0; ++} ++ ++static int ++ramtd_nand_erase(struct mtd_info *mtd, struct erase_info *instr) ++{ ++ struct ra_nand_chip *ra = (struct ra_nand_chip *)mtd->priv; ++ int ret; ++ ++ ra_dbg("%s: start:%x, len:%x \n", __func__, ++ (unsigned int)instr->addr, (unsigned int)instr->len); ++ ++ nand_get_device(ra, FL_ERASING); ++ ret = _nand_erase_nand((struct ra_nand_chip *)mtd->priv, instr); ++ nand_release_device(ra); ++ ++ return ret; ++} ++ ++static int ++ramtd_nand_write(struct mtd_info *mtd, loff_t to, size_t len, ++ size_t *retlen, const uint8_t *buf) ++{ ++ struct ra_nand_chip *ra = mtd->priv; ++ struct mtd_oob_ops ops; ++ int ret; ++ ++ ra_dbg("%s: to 0x%x len=0x%x\n", __func__, to, len); ++ ++ if ((to + len) > mtd->size) ++ return -EINVAL; ++ ++ if (!len) ++ return 0; ++ ++ nand_get_device(ra, FL_WRITING); ++ ++ memset(&ops, 0, sizeof(ops)); ++ ops.len = len; ++ ops.datbuf = (uint8_t *)buf; ++ ops.oobbuf = NULL; ++ ops.mode = MTD_OPS_AUTO_OOB; ++ ++ ret = nand_do_write_ops(ra, to, &ops); ++ ++ *retlen = ops.retlen; ++ ++ nand_release_device(ra); ++ ++ return ret; ++} ++ ++static int ++ramtd_nand_read(struct mtd_info *mtd, loff_t from, size_t len, ++ size_t *retlen, uint8_t *buf) ++{ ++ ++ struct ra_nand_chip *ra = mtd->priv; ++ int ret; ++ struct mtd_oob_ops ops; ++ ++ ra_dbg("%s: mtd:%p from:%x, len:%x, buf:%p \n", __func__, mtd, (unsigned int)from, len, buf); ++ ++ /* Do not allow reads past end of device */ ++ if ((from + len) > mtd->size) ++ return -EINVAL; ++ if (!len) ++ return 0; ++ ++ nand_get_device(ra, FL_READING); ++ ++ memset(&ops, 0, sizeof(ops)); ++ ops.len = len; ++ ops.datbuf = buf; ++ ops.oobbuf = NULL; ++ ops.mode = MTD_OPS_AUTO_OOB; ++ ++ ret = nand_do_read_ops(ra, from, &ops); ++ ++ *retlen = ops.retlen; ++ ++ nand_release_device(ra); ++ ++ return ret; ++ ++} ++ ++static int ++ramtd_nand_readoob(struct mtd_info *mtd, loff_t from, ++ struct mtd_oob_ops *ops) ++{ ++ struct ra_nand_chip *ra = mtd->priv; ++ int ret; ++ ++ ra_dbg("%s: \n", __func__); ++ ++ nand_get_device(ra, FL_READING); ++ ++ ret = nand_do_read_ops(ra, from, ops); ++ ++ nand_release_device(ra); ++ ++ return ret; ++} ++ ++static int ++ramtd_nand_writeoob(struct mtd_info *mtd, loff_t to, ++ struct mtd_oob_ops *ops) ++{ ++ struct ra_nand_chip *ra = mtd->priv; ++ int ret; ++ ++ nand_get_device(ra, FL_READING); ++ ret = nand_do_write_ops(ra, to, ops); ++ nand_release_device(ra); ++ ++ return ret; ++} ++ ++static int ++ramtd_nand_block_isbad(struct mtd_info *mtd, loff_t offs) ++{ ++ if (offs > mtd->size) ++ return -EINVAL; ++ ++ return nand_block_checkbad((struct ra_nand_chip *)mtd->priv, offs); ++} ++ ++static int ++ramtd_nand_block_markbad(struct mtd_info *mtd, loff_t ofs) ++{ ++ struct ra_nand_chip *ra = mtd->priv; ++ int ret; ++ ++ ra_dbg("%s: \n", __func__); ++ nand_get_device(ra, FL_WRITING); ++ ret = nand_block_markbad(ra, ofs); ++ nand_release_device(ra); ++ ++ return ret; ++} ++ ++// 1-bit error detection ++static int one_bit_correction(char *ecc1, char *ecc2, int *bytes, int *bits) ++{ ++ // check if ecc and expected are all valid ++ char *p, nibble, crumb; ++ int i, xor, iecc1 = 0, iecc2 = 0; ++ ++ printk("correction : %x %x %x\n", ecc1[0], ecc1[1], ecc1[2]); ++ printk("correction : %x %x %x\n", ecc2[0], ecc2[1], ecc2[2]); ++ ++ p = (char *)ecc1; ++ for (i = 0; i < CONFIG_ECC_BYTES; i++) ++ { ++ nibble = *(p+i) & 0xf; ++ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) && ++ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9)) ++ return -1; ++ nibble = ((*(p+i)) >> 4) & 0xf; ++ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) && ++ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9)) ++ return -1; ++ } ++ ++ p = (char *)ecc2; ++ for (i = 0; i < CONFIG_ECC_BYTES; i++) ++ { ++ nibble = *(p+i) & 0xf; ++ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) && ++ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9)) ++ return -1; ++ nibble = ((*(p+i)) >> 4) & 0xf; ++ if ((nibble != 0x0) && (nibble != 0xf) && (nibble != 0x3) && (nibble != 0xc) && ++ (nibble != 0x5) && (nibble != 0xa) && (nibble != 0x6) && (nibble != 0x9)) ++ return -1; ++ } ++ ++ memcpy(&iecc1, ecc1, 3); ++ memcpy(&iecc2, ecc2, 3); ++ ++ xor = iecc1 ^ iecc2; ++ printk("xor = %x (%x %x)\n", xor, iecc1, iecc2); ++ ++ *bytes = 0; ++ for (i = 0; i < 9; i++) ++ { ++ crumb = (xor >> (2*i)) & 0x3; ++ if ((crumb == 0x0) || (crumb == 0x3)) ++ return -1; ++ if (crumb == 0x2) ++ *bytes += (1 << i); ++ } ++ ++ *bits = 0; ++ for (i = 0; i < 3; i++) ++ { ++ crumb = (xor >> (18 + 2*i)) & 0x3; ++ if ((crumb == 0x0) || (crumb == 0x3)) ++ return -1; ++ if (crumb == 0x2) ++ *bits += (1 << i); ++ } ++ ++ return 0; ++} ++ ++ ++ ++/************************************************************ ++ * the init/exit section. ++ */ ++ ++static struct nand_ecclayout ra_oob_layout = { ++ .eccbytes = CONFIG_ECC_BYTES, ++ .eccpos = {5, 6, 7}, ++ .oobfree = { ++ {.offset = 0, .length = 4}, ++ {.offset = 8, .length = 8}, ++ {.offset = 0, .length = 0} ++ }, ++#define RA_CHIP_OOB_AVAIL (4+8) ++ .oobavail = RA_CHIP_OOB_AVAIL, ++ // 5th byte is bad-block flag. ++}; ++ ++static int ++mtk_nand_probe(struct platform_device *pdev) ++{ ++ struct mtd_part_parser_data ppdata; ++ struct ra_nand_chip *ra; ++ int alloc_size, bbt_size, buffers_size, reg, err; ++ unsigned char chip_mode = 12; ++ ++/* if(ra_check_flash_type()!=BOOT_FROM_NAND) { ++ return 0; ++ }*/ ++ ++ //FIXME: config 512 or 2048-byte page according to HWCONF ++#if defined (CONFIG_RALINK_RT6855A) ++ reg = ra_inl(RALINK_SYSCTL_BASE+0x8c); ++ chip_mode = ((reg>>28) & 0x3)|(((reg>>22) & 0x3)<<2); ++ if (chip_mode == 1) { ++ printk("! nand 2048\n"); ++ ra_or(NFC_CONF1, 1); ++ is_nand_page_2048 = 1; ++ nand_addrlen = 5; ++ } ++ else { ++ printk("! nand 512\n"); ++ ra_and(NFC_CONF1, ~1); ++ is_nand_page_2048 = 0; ++ nand_addrlen = 4; ++ } ++#elif (defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_RT6855)) ++ ra_outl(RALINK_SYSCTL_BASE+0x60, ra_inl(RALINK_SYSCTL_BASE+0x60) & ~(0x3<<18)); ++ reg = ra_inl(RALINK_SYSCTL_BASE+0x10); ++ chip_mode = (reg & 0x0F); ++ if((chip_mode==1)||(chip_mode==11)) { ++ ra_or(NFC_CONF1, 1); ++ is_nand_page_2048 = 1; ++ nand_addrlen = ((chip_mode!=11) ? 4 : 5); ++ printk("!!! nand page size = 2048, addr len=%d\n", nand_addrlen); ++ } ++ else { ++ ra_and(NFC_CONF1, ~1); ++ is_nand_page_2048 = 0; ++ nand_addrlen = ((chip_mode!=10) ? 3 : 4); ++ printk("!!! nand page size = 512, addr len=%d\n", nand_addrlen); ++ } ++#else ++ is_nand_page_2048 = 0; ++ nand_addrlen = 3; ++ printk("!!! nand page size = 512, addr len=%d\n", nand_addrlen); ++#endif ++ ++#if defined (CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_RT6855) ++ //config ECC location ++ ra_and(NFC_CONF1, 0xfff000ff); ++ ra_or(NFC_CONF1, ((CONFIG_ECC_OFFSET + 2) << 16) + ++ ((CONFIG_ECC_OFFSET + 1) << 12) + ++ (CONFIG_ECC_OFFSET << 8)); ++#endif ++ ++#define ALIGNE_16(a) (((unsigned long)(a)+15) & ~15) ++ buffers_size = ALIGNE_16((1<<CONFIG_PAGE_SIZE_BIT) + (1<<CONFIG_OOBSIZE_PER_PAGE_BIT)); //ra->buffers ++ bbt_size = BBTTAG_BITS * (1<<(CONFIG_CHIP_SIZE_BIT - (CONFIG_PAGE_SIZE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT))) / 8; //ra->bbt ++ bbt_size = ALIGNE_16(bbt_size); ++ ++ alloc_size = buffers_size + bbt_size; ++ alloc_size += buffers_size; //for ra->readback_buffers ++ alloc_size += sizeof(*ra); ++ alloc_size += sizeof(*ranfc_mtd); ++ ++ //make sure gpio-0 is input ++ ra_outl(RALINK_PIO_BASE+0x24, ra_inl(RALINK_PIO_BASE+0x24) & ~0x01); ++ ++ ra = (struct ra_nand_chip *)kzalloc(alloc_size, GFP_KERNEL | GFP_DMA); ++ if (!ra) { ++ printk("%s: mem alloc fail \n", __func__); ++ return -ENOMEM; ++ } ++ memset(ra, 0, alloc_size); ++ ++ //dynamic ++ ra->buffers = (char *)((char *)ra + sizeof(*ra)); ++ ra->readback_buffers = ra->buffers + buffers_size; ++ ra->bbt = ra->readback_buffers + buffers_size; ++ ranfc_mtd = (struct mtd_info *)(ra->bbt + bbt_size); ++ ++ //static ++ ra->numchips = CONFIG_NUMCHIPS; ++ ra->chip_shift = CONFIG_CHIP_SIZE_BIT; ++ ra->page_shift = CONFIG_PAGE_SIZE_BIT; ++ ra->oob_shift = CONFIG_OOBSIZE_PER_PAGE_BIT; ++ ra->erase_shift = (CONFIG_PAGE_SIZE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT); ++ ra->badblockpos = CONFIG_BAD_BLOCK_POS; ++ ra_oob_layout.eccpos[0] = CONFIG_ECC_OFFSET; ++ ra_oob_layout.eccpos[1] = CONFIG_ECC_OFFSET + 1; ++ ra_oob_layout.eccpos[2] = CONFIG_ECC_OFFSET + 2; ++ ra->oob = &ra_oob_layout; ++ ra->buffers_page = -1; ++ ++#if defined (WORKAROUND_RX_BUF_OV) ++ if (ranfc_verify) { ++ ra->sandbox_page = nand_bbt_find_sandbox(ra); ++ } ++#endif ++ ra_outl(NFC_CTRL, ra_inl(NFC_CTRL) | 0x01); //set wp to high ++ nfc_all_reset(); ++ ++ ranfc_mtd->type = MTD_NANDFLASH; ++ ranfc_mtd->flags = MTD_CAP_NANDFLASH; ++ ranfc_mtd->size = CONFIG_NUMCHIPS * CFG_CHIPSIZE; ++ ranfc_mtd->erasesize = CFG_BLOCKSIZE; ++ ranfc_mtd->writesize = CFG_PAGESIZE; ++ ranfc_mtd->oobsize = CFG_PAGE_OOBSIZE; ++ ranfc_mtd->oobavail = RA_CHIP_OOB_AVAIL; ++ ranfc_mtd->name = "ra_nfc"; ++ //ranfc_mtd->index ++ ranfc_mtd->ecclayout = &ra_oob_layout; ++ //ranfc_mtd->numberaseregions ++ //ranfc_mtd->eraseregions ++ //ranfc_mtd->bansize ++ ranfc_mtd->_erase = ramtd_nand_erase; ++ //ranfc_mtd->point ++ //ranfc_mtd->unpoint ++ ranfc_mtd->_read = ramtd_nand_read; ++ ranfc_mtd->_write = ramtd_nand_write; ++ ranfc_mtd->_read_oob = ramtd_nand_readoob; ++ ranfc_mtd->_write_oob = ramtd_nand_writeoob; ++ //ranfc_mtd->get_fact_prot_info; ranfc_mtd->read_fact_prot_reg; ++ //ranfc_mtd->get_user_prot_info; ranfc_mtd->read_user_prot_reg; ++ //ranfc_mtd->write_user_prot_reg; ranfc_mtd->lock_user_prot_reg; ++ //ranfc_mtd->writev; ranfc_mtd->sync; ranfc_mtd->lock; ranfc_mtd->unlock; ranfc_mtd->suspend; ranfc_mtd->resume; ++ ranfc_mtd->_block_isbad = ramtd_nand_block_isbad; ++ ranfc_mtd->_block_markbad = ramtd_nand_block_markbad; ++ //ranfc_mtd->reboot_notifier ++ //ranfc_mtd->ecc_stats; ++ // subpage_sht; ++ ++ //ranfc_mtd->get_device; ranfc_mtd->put_device ++ ranfc_mtd->priv = ra; ++ ++ ranfc_mtd->owner = THIS_MODULE; ++ ra->controller = &ra->hwcontrol; ++ mutex_init(ra->controller); ++ ++ printk("%s: alloc %x, at %p , btt(%p, %x), ranfc_mtd:%p\n", ++ __func__ , alloc_size, ra, ra->bbt, bbt_size, ranfc_mtd); ++ ++ ppdata.of_node = pdev->dev.of_node; ++ err = mtd_device_parse_register(ranfc_mtd, mtk_probe_types, ++ &ppdata, NULL, 0); ++ ++ return err; ++} ++ ++static int ++mtk_nand_remove(struct platform_device *pdev) ++{ ++ struct ra_nand_chip *ra; ++ ++ if (ranfc_mtd) { ++ ra = (struct ra_nand_chip *)ranfc_mtd->priv; ++ ++ /* Deregister partitions */ ++ //del_mtd_partitions(ranfc_mtd); ++ kfree(ra); ++ } ++ return 0; ++} ++ ++static const struct of_device_id mtk_nand_match[] = { ++ { .compatible = "mtk,mt7620-nand" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, mtk_nand_match); ++ ++static struct platform_driver mtk_nand_driver = { ++ .probe = mtk_nand_probe, ++ .remove = mtk_nand_remove, ++ .driver = { ++ .name = "mt7620_nand", ++ .owner = THIS_MODULE, ++ .of_match_table = mtk_nand_match, ++ }, ++}; ++ ++module_platform_driver(mtk_nand_driver); ++ ++ ++MODULE_LICENSE("GPL"); +diff --git a/drivers/mtd/maps/ralink_nand.h b/drivers/mtd/maps/ralink_nand.h +new file mode 100644 +index 0000000..a408ae9 +--- /dev/null ++++ b/drivers/mtd/maps/ralink_nand.h +@@ -0,0 +1,232 @@ ++#ifndef RT2880_NAND_H ++#define RT2880_NAND_H ++ ++#include <linux/mtd/mtd.h> ++ ++//#include "gdma.h" ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_NAND_CTRL_BASE 0xB0000810 ++#define CONFIG_RALINK_MT7620 ++ ++#define SKIP_BAD_BLOCK ++//#define RANDOM_GEN_BAD_BLOCK ++ ++#define ra_inl(addr) (*(volatile unsigned int *)(addr)) ++#define ra_outl(addr, value) (*(volatile unsigned int *)(addr) = (value)) ++#define ra_aor(addr, a_mask, o_value) ra_outl(addr, (ra_inl(addr) & (a_mask)) | (o_value)) ++#define ra_and(addr, a_mask) ra_aor(addr, a_mask, 0) ++#define ra_or(addr, o_value) ra_aor(addr, -1, o_value) ++ ++ ++#define CONFIG_NUMCHIPS 1 ++#define CONFIG_NOT_SUPPORT_WP //rt3052 has no WP signal for chip. ++//#define CONFIG_NOT_SUPPORT_RB ++ ++extern int is_nand_page_2048; ++extern const unsigned int nand_size_map[2][3]; ++ ++//chip ++// chip geometry: SAMSUNG small size 32MB. ++#define CONFIG_CHIP_SIZE_BIT (nand_size_map[is_nand_page_2048][nand_addrlen-3]) //! (1<<NAND_SIZE_BYTE) MB ++//#define CONFIG_CHIP_SIZE_BIT (is_nand_page_2048? 29 : 25) //! (1<<NAND_SIZE_BYTE) MB ++#define CONFIG_PAGE_SIZE_BIT (is_nand_page_2048? 11 : 9) //! (1<<PAGE_SIZE) MB ++//#define CONFIG_SUBPAGE_BIT 1 //! these bits will be compensate by command cycle ++#define CONFIG_NUMPAGE_PER_BLOCK_BIT (is_nand_page_2048? 6 : 5) //! order of number of pages a block. ++#define CONFIG_OOBSIZE_PER_PAGE_BIT (is_nand_page_2048? 6 : 4) //! byte number of oob a page. ++#define CONFIG_BAD_BLOCK_POS (is_nand_page_2048? 0 : 4) //! offset of byte to denote bad block. ++#define CONFIG_ECC_BYTES 3 //! ecc has 3 bytes ++#define CONFIG_ECC_OFFSET (is_nand_page_2048? 6 : 5) //! ecc starts from offset 5. ++ ++//this section should not be modified. ++//#define CFG_COLUMN_ADDR_MASK ((1 << (CONFIG_PAGE_SIZE_BIT - CONFIG_SUBPAGE_BIT)) - 1) ++//#define CFG_COLUMN_ADDR_CYCLE (((CONFIG_PAGE_SIZE_BIT - CONFIG_SUBPAGE_BIT) + 7)/8) ++//#define CFG_ROW_ADDR_CYCLE ((CONFIG_CHIP_SIZE_BIT - CONFIG_PAGE_SIZE_BIT + 7)/8) ++//#define CFG_ADDR_CYCLE (CFG_COLUMN_ADDR_CYCLE + CFG_ROW_ADDR_CYCLE) ++ ++#define CFG_COLUMN_ADDR_CYCLE (is_nand_page_2048? 2 : 1) ++#define CFG_ROW_ADDR_CYCLE (nand_addrlen - CFG_COLUMN_ADDR_CYCLE) ++#define CFG_ADDR_CYCLE (CFG_COLUMN_ADDR_CYCLE + CFG_ROW_ADDR_CYCLE) ++ ++#define CFG_CHIPSIZE (1 << ((CONFIG_CHIP_SIZE_BIT>=32)? 31 : CONFIG_CHIP_SIZE_BIT)) ++//#define CFG_CHIPSIZE (1 << CONFIG_CHIP_SIZE_BIT) ++#define CFG_PAGESIZE (1 << CONFIG_PAGE_SIZE_BIT) ++#define CFG_BLOCKSIZE (CFG_PAGESIZE << CONFIG_NUMPAGE_PER_BLOCK_BIT) ++#define CFG_NUMPAGE (1 << (CONFIG_CHIP_SIZE_BIT - CONFIG_PAGE_SIZE_BIT)) ++#define CFG_NUMBLOCK (CFG_NUMPAGE >> CONFIG_NUMPAGE_PER_BLOCK_BIT) ++#define CFG_BLOCK_OOBSIZE (1 << (CONFIG_OOBSIZE_PER_PAGE_BIT + CONFIG_NUMPAGE_PER_BLOCK_BIT)) ++#define CFG_PAGE_OOBSIZE (1 << CONFIG_OOBSIZE_PER_PAGE_BIT) ++ ++#define NAND_BLOCK_ALIGN(addr) ((addr) & (CFG_BLOCKSIZE-1)) ++#define NAND_PAGE_ALIGN(addr) ((addr) & (CFG_PAGESIZE-1)) ++ ++ ++#define NFC_BASE RALINK_NAND_CTRL_BASE ++#define NFC_CTRL (NFC_BASE + 0x0) ++#define NFC_CONF (NFC_BASE + 0x4) ++#define NFC_CMD1 (NFC_BASE + 0x8) ++#define NFC_CMD2 (NFC_BASE + 0xc) ++#define NFC_CMD3 (NFC_BASE + 0x10) ++#define NFC_ADDR (NFC_BASE + 0x14) ++#define NFC_DATA (NFC_BASE + 0x18) ++#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) ++#define NFC_ECC (NFC_BASE + 0x30) ++#else ++#define NFC_ECC (NFC_BASE + 0x1c) ++#endif ++#define NFC_STATUS (NFC_BASE + 0x20) ++#define NFC_INT_EN (NFC_BASE + 0x24) ++#define NFC_INT_ST (NFC_BASE + 0x28) ++#if defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) ++#define NFC_CONF1 (NFC_BASE + 0x2c) ++#define NFC_ECC_P1 (NFC_BASE + 0x30) ++#define NFC_ECC_P2 (NFC_BASE + 0x34) ++#define NFC_ECC_P3 (NFC_BASE + 0x38) ++#define NFC_ECC_P4 (NFC_BASE + 0x3c) ++#define NFC_ECC_ERR1 (NFC_BASE + 0x40) ++#define NFC_ECC_ERR2 (NFC_BASE + 0x44) ++#define NFC_ECC_ERR3 (NFC_BASE + 0x48) ++#define NFC_ECC_ERR4 (NFC_BASE + 0x4c) ++#define NFC_ADDR2 (NFC_BASE + 0x50) ++#endif ++ ++enum _int_stat { ++ INT_ST_ND_DONE = 1<<0, ++ INT_ST_TX_BUF_RDY = 1<<1, ++ INT_ST_RX_BUF_RDY = 1<<2, ++ INT_ST_ECC_ERR = 1<<3, ++ INT_ST_TX_TRAS_ERR = 1<<4, ++ INT_ST_RX_TRAS_ERR = 1<<5, ++ INT_ST_TX_KICK_ERR = 1<<6, ++ INT_ST_RX_KICK_ERR = 1<<7 ++}; ++ ++ ++//#define WORKAROUND_RX_BUF_OV 1 ++ ++ ++/************************************************************* ++ * stolen from nand.h ++ *************************************************************/ ++ ++/* ++ * Standard NAND flash commands ++ */ ++#define NAND_CMD_READ0 0 ++#define NAND_CMD_READ1 1 ++#define NAND_CMD_RNDOUT 5 ++#define NAND_CMD_PAGEPROG 0x10 ++#define NAND_CMD_READOOB 0x50 ++#define NAND_CMD_ERASE1 0x60 ++#define NAND_CMD_STATUS 0x70 ++#define NAND_CMD_STATUS_MULTI 0x71 ++#define NAND_CMD_SEQIN 0x80 ++#define NAND_CMD_RNDIN 0x85 ++#define NAND_CMD_READID 0x90 ++#define NAND_CMD_ERASE2 0xd0 ++#define NAND_CMD_RESET 0xff ++ ++/* Extended commands for large page devices */ ++#define NAND_CMD_READSTART 0x30 ++#define NAND_CMD_RNDOUTSTART 0xE0 ++#define NAND_CMD_CACHEDPROG 0x15 ++ ++/* Extended commands for AG-AND device */ ++/* ++ * Note: the command for NAND_CMD_DEPLETE1 is really 0x00 but ++ * there is no way to distinguish that from NAND_CMD_READ0 ++ * until the remaining sequence of commands has been completed ++ * so add a high order bit and mask it off in the command. ++ */ ++#define NAND_CMD_DEPLETE1 0x100 ++#define NAND_CMD_DEPLETE2 0x38 ++#define NAND_CMD_STATUS_MULTI 0x71 ++#define NAND_CMD_STATUS_ERROR 0x72 ++/* multi-bank error status (banks 0-3) */ ++#define NAND_CMD_STATUS_ERROR0 0x73 ++#define NAND_CMD_STATUS_ERROR1 0x74 ++#define NAND_CMD_STATUS_ERROR2 0x75 ++#define NAND_CMD_STATUS_ERROR3 0x76 ++#define NAND_CMD_STATUS_RESET 0x7f ++#define NAND_CMD_STATUS_CLEAR 0xff ++ ++#define NAND_CMD_NONE -1 ++ ++/* Status bits */ ++#define NAND_STATUS_FAIL 0x01 ++#define NAND_STATUS_FAIL_N1 0x02 ++#define NAND_STATUS_TRUE_READY 0x20 ++#define NAND_STATUS_READY 0x40 ++#define NAND_STATUS_WP 0x80 ++ ++typedef enum { ++ FL_READY, ++ FL_READING, ++ FL_WRITING, ++ FL_ERASING, ++ FL_SYNCING, ++ FL_CACHEDPRG, ++ FL_PM_SUSPENDED, ++} nand_state_t; ++ ++/*************************************************************/ ++ ++ ++ ++typedef enum _ra_flags { ++ FLAG_NONE = 0, ++ FLAG_ECC_EN = (1<<0), ++ FLAG_USE_GDMA = (1<<1), ++ FLAG_VERIFY = (1<<2), ++} RA_FLAGS; ++ ++ ++#define BBTTAG_BITS 2 ++#define BBTTAG_BITS_MASK ((1<<BBTTAG_BITS) -1) ++enum BBT_TAG { ++ BBT_TAG_UNKNOWN = 0, //2'b01 ++ BBT_TAG_GOOD = 3, //2'b11 ++ BBT_TAG_BAD = 2, //2'b10 ++ BBT_TAG_RES = 1, //2'b01 ++}; ++ ++struct ra_nand_chip { ++ int numchips; ++ int chip_shift; ++ int page_shift; ++ int erase_shift; ++ int oob_shift; ++ int badblockpos; ++#if !defined (__UBOOT__) ++ struct mutex hwcontrol; ++ struct mutex *controller; ++#endif ++ struct nand_ecclayout *oob; ++ int state; ++ unsigned int buffers_page; ++ char *buffers; //[CFG_PAGESIZE + CFG_PAGE_OOBSIZE]; ++ char *readback_buffers; ++ unsigned char *bbt; ++#if defined (WORKAROUND_RX_BUF_OV) ++ unsigned int sandbox_page; // steal a page (block) for read ECC verification ++#endif ++ ++}; ++ ++ ++ ++//fixme, gdma api ++int nand_dma_sync(void); ++void release_dma_buf(void); ++int set_gdma_ch(unsigned long dst, ++ unsigned long src, unsigned int len, int burst_size, ++ int soft_mode, int src_req_type, int dst_req_type, ++ int src_burst_mode, int dst_burst_mode); ++ ++ ++ ++ ++#endif +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch b/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch new file mode 100644 index 0000000000..214e660f68 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0044-mtd-add-chunked-read-io-to-m25p80.patch @@ -0,0 +1,166 @@ +From b6d5d4c3d595b4cfb6a052ac7151fdb1d9a776ea Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:58:09 +0100 +Subject: [PATCH 44/57] mtd: add chunked read io to m25p80 + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/mtd/devices/m25p80.c | 128 ++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 128 insertions(+) + +diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c +index ad19139..6f4290e 100644 +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -556,6 +556,58 @@ static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len, + return 0; + } + ++static int m25p80_read_chunked(struct mtd_info *mtd, loff_t from, size_t len, ++ size_t *retlen, u_char *buf) ++{ ++ struct m25p *flash = mtd_to_m25p(mtd); ++ struct spi_transfer t[2]; ++ struct spi_message m; ++ uint8_t opcode; ++ int idx = 0; ++ ++ pr_debug("%s: %s from 0x%08x, len %zd\n", dev_name(&flash->spi->dev), ++ __func__, (u32)from, len); ++ ++ spi_message_init(&m); ++ memset(t, 0, (sizeof t)); ++ ++ t[0].tx_buf = flash->command; ++ t[0].len = m25p_cmdsz(flash); ++ spi_message_add_tail(&t[0], &m); ++ spi_message_add_tail(&t[1], &m); ++ ++ *retlen = 0; ++ ++ while (idx < len) { ++ int rlen = (len - idx > 4) ? (4) : (len - idx); ++ ++ t[1].rx_buf = &buf[idx]; ++ t[1].len = rlen; ++ ++ mutex_lock(&flash->lock); ++ ++ /* Wait till previous write/erase is done. */ ++ if (wait_till_ready(flash)) { ++ /* REVISIT status return?? */ ++ mutex_unlock(&flash->lock); ++ return 1; ++ } ++ ++ /* Set up the write data buffer. */ ++ opcode = OPCODE_NORM_READ; ++ flash->command[0] = opcode; ++ m25p_addr2cmd(flash, from + idx, flash->command); ++ ++ spi_sync(flash->spi, &m); ++ ++ *retlen += m.actual_length - m25p_cmdsz(flash); ++ ++ mutex_unlock(&flash->lock); ++ idx += rlen; ++ } ++ return 0; ++} ++ + /* + * Write an address range to the flash chip. Data must be written in + * FLASH_PAGESIZE chunks. The address range may be any size provided +@@ -643,6 +695,76 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, + return 0; + } + ++static int m25p80_write_chunked(struct mtd_info *mtd, loff_t to, size_t len, ++ size_t *retlen, const u_char *buf) ++{ ++ struct m25p *flash = mtd_to_m25p(mtd); ++ struct spi_transfer t; ++ struct spi_message m; ++ u32 i, page_size; ++ u8 tmp[8]; ++ ++ pr_debug("%s: %s to 0x%08x, len %zd\n", dev_name(&flash->spi->dev), ++ __func__, (u32)to, len); ++ ++ spi_message_init(&m); ++ memset(&t, 0, (sizeof t)); ++ ++ t.tx_buf = tmp; ++ t.len = 8; ++ spi_message_add_tail(&t, &m); ++ ++ mutex_lock(&flash->lock); ++ ++ /* Wait until finished previous write command. */ ++ if (wait_till_ready(flash)) { ++ mutex_unlock(&flash->lock); ++ return 1; ++ } ++ ++ write_enable(flash); ++ ++ /* Set up the opcode in the write buffer. */ ++ flash->command[0] = OPCODE_PP; ++ m25p_addr2cmd(flash, to, flash->command); ++ ++ t.len = 4 + (to & 0x3); ++ if (t.len == 4) ++ t.len = 8; ++ memcpy(tmp, flash->command, 4); ++ memcpy(&tmp[4], buf, t.len - 4); ++ spi_sync(flash->spi, &m); ++ page_size = t.len - 4; ++ ++ *retlen = m.actual_length - m25p_cmdsz(flash); ++ ++ /* write everything in flash->page_size chunks */ ++ for (i = page_size; i < len; i += page_size) { ++ page_size = len - i; ++ if (page_size > 4) ++ page_size = 4; ++ ++ /* write the next page to flash */ ++ m25p_addr2cmd(flash, to + i, flash->command); ++ ++ memcpy(tmp, flash->command, 4); ++ memcpy(&tmp[4], buf + i, page_size); ++ t.len = 4 + page_size; ++ ++ wait_till_ready(flash); ++ ++ write_enable(flash); ++ ++ spi_sync(flash->spi, &m); ++ ++ *retlen += m.actual_length - m25p_cmdsz(flash); ++ } ++ ++ mutex_unlock(&flash->lock); ++ ++ return 0; ++} ++ + static int sst_write(struct mtd_info *mtd, loff_t to, size_t len, + size_t *retlen, const u_char *buf) + { +@@ -1252,6 +1374,12 @@ static int m25p_probe(struct spi_device *spi) + return -EINVAL; + } + ++ if (np && of_property_read_bool(np, "m25p,chunked-io")) { ++ dev_warn(&spi->dev, "using chunked io\n"); ++ flash->mtd._read = m25p80_read_chunked; ++ flash->mtd._write = m25p80_write_chunked; ++ } ++ + flash->program_opcode = OPCODE_PP; + + if (info->addr_width) +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0045-mtd-add-mt7621-nand-support.patch b/target/linux/ramips/patches-3.14/0045-mtd-add-mt7621-nand-support.patch new file mode 100644 index 0000000000..08a0647f27 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0045-mtd-add-mt7621-nand-support.patch @@ -0,0 +1,4455 @@ +From 5db075c5dd038fbf4b5a0196e10f4f9658236372 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 11:05:17 +0100 +Subject: [PATCH 45/57] mtd: add mt7621 nand support + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/mtd/nand/Kconfig | 6 + + drivers/mtd/nand/Makefile | 1 + + drivers/mtd/nand/bmt.c | 750 ++++++++++++ + drivers/mtd/nand/bmt.h | 80 ++ + drivers/mtd/nand/dev-nand.c | 63 + + drivers/mtd/nand/mt6575_typedefs.h | 340 ++++++ + drivers/mtd/nand/mtk_nand.c | 2304 +++++++++++++++++++++++++++++++++++ + drivers/mtd/nand/mtk_nand.h | 452 +++++++ + drivers/mtd/nand/nand_base.c | 6 +- + drivers/mtd/nand/nand_bbt.c | 19 + + drivers/mtd/nand/nand_def.h | 123 ++ + drivers/mtd/nand/nand_device_list.h | 55 + + drivers/mtd/nand/partition.h | 115 ++ + 13 files changed, 4311 insertions(+), 3 deletions(-) + create mode 100644 drivers/mtd/nand/bmt.c + create mode 100644 drivers/mtd/nand/bmt.h + create mode 100644 drivers/mtd/nand/dev-nand.c + create mode 100644 drivers/mtd/nand/mt6575_typedefs.h + create mode 100644 drivers/mtd/nand/mtk_nand.c + create mode 100644 drivers/mtd/nand/mtk_nand.h + create mode 100644 drivers/mtd/nand/nand_def.h + create mode 100644 drivers/mtd/nand/nand_device_list.h + create mode 100644 drivers/mtd/nand/partition.h + +diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig +index 90ff447..5cafa39 100644 +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -510,4 +510,10 @@ config MTD_NAND_XWAY + Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached + to the External Bus Unit (EBU). + ++config MTK_MTD_NAND ++ tristate "Support for MTK SoC NAND controller" ++ depends on SOC_MT7621 ++ select MTD_NAND_IDS ++ select MTD_NAND_ECC ++ + endif # MTD_NAND +diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile +index 542b568..c68c96c 100644 +--- a/drivers/mtd/nand/Makefile ++++ b/drivers/mtd/nand/Makefile +@@ -49,5 +49,6 @@ obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o + obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ + obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o + obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/ ++obj-$(CONFIG_MTK_MTD_NAND) += mtk_nand.o bmt.o + + nand-objs := nand_base.o nand_bbt.o +diff --git a/drivers/mtd/nand/bmt.c b/drivers/mtd/nand/bmt.c +new file mode 100644 +index 0000000..0462871 +--- /dev/null ++++ b/drivers/mtd/nand/bmt.c +@@ -0,0 +1,750 @@ ++#include "bmt.h" ++ ++typedef struct ++{ ++ char signature[3]; ++ u8 version; ++ u8 bad_count; // bad block count in pool ++ u8 mapped_count; // mapped block count in pool ++ u8 checksum; ++ u8 reseverd[13]; ++} phys_bmt_header; ++ ++typedef struct ++{ ++ phys_bmt_header header; ++ bmt_entry table[MAX_BMT_SIZE]; ++} phys_bmt_struct; ++ ++typedef struct ++{ ++ char signature[3]; ++} bmt_oob_data; ++ ++static char MAIN_SIGNATURE[] = "BMT"; ++static char OOB_SIGNATURE[] = "bmt"; ++#define SIGNATURE_SIZE (3) ++ ++#define MAX_DAT_SIZE 0x1000 ++#define MAX_OOB_SIZE 0x80 ++ ++static struct mtd_info *mtd_bmt; ++static struct nand_chip *nand_chip_bmt; ++#define BLOCK_SIZE_BMT (1 << nand_chip_bmt->phys_erase_shift) ++#define PAGE_SIZE_BMT (1 << nand_chip_bmt->page_shift) ++ ++#define OFFSET(block) ((block) * BLOCK_SIZE_BMT) ++#define PAGE_ADDR(block) ((block) * BLOCK_SIZE_BMT / PAGE_SIZE_BMT) ++ ++/********************************************************************* ++* Flash is splited into 2 parts, system part is for normal system * ++* system usage, size is system_block_count, another is replace pool * ++* +-------------------------------------------------+ * ++* | system_block_count | bmt_block_count | * ++* +-------------------------------------------------+ * ++*********************************************************************/ ++static u32 total_block_count; // block number in flash ++static u32 system_block_count; ++static int bmt_block_count; // bmt table size ++// static int bmt_count; // block used in bmt ++static int page_per_block; // page per count ++ ++static u32 bmt_block_index; // bmt block index ++static bmt_struct bmt; // dynamic created global bmt table ++ ++static u8 dat_buf[MAX_DAT_SIZE]; ++static u8 oob_buf[MAX_OOB_SIZE]; ++static bool pool_erased; ++ ++/*************************************************************** ++* ++* Interface adaptor for preloader/uboot/kernel ++* These interfaces operate on physical address, read/write ++* physical data. ++* ++***************************************************************/ ++int nand_read_page_bmt(u32 page, u8 * dat, u8 * oob) ++{ ++ return mtk_nand_exec_read_page(mtd_bmt, page, PAGE_SIZE_BMT, dat, oob); ++} ++ ++bool nand_block_bad_bmt(u32 offset) ++{ ++ return mtk_nand_block_bad_hw(mtd_bmt, offset); ++} ++ ++bool nand_erase_bmt(u32 offset) ++{ ++ int status; ++ if (offset < 0x20000) ++ { ++ MSG(INIT, "erase offset: 0x%x\n", offset); ++ } ++ ++ status = mtk_nand_erase_hw(mtd_bmt, offset / PAGE_SIZE_BMT); // as nand_chip structure doesn't have a erase function defined ++ if (status & NAND_STATUS_FAIL) ++ return false; ++ else ++ return true; ++} ++ ++int mark_block_bad_bmt(u32 offset) ++{ ++ return mtk_nand_block_markbad_hw(mtd_bmt, offset); //mark_block_bad_hw(offset); ++} ++ ++bool nand_write_page_bmt(u32 page, u8 * dat, u8 * oob) ++{ ++ if (mtk_nand_exec_write_page(mtd_bmt, page, PAGE_SIZE_BMT, dat, oob)) ++ return false; ++ else ++ return true; ++} ++ ++/*************************************************************** ++* * ++* static internal function * ++* * ++***************************************************************/ ++static void dump_bmt_info(bmt_struct * bmt) ++{ ++ int i; ++ ++ MSG(INIT, "BMT v%d. total %d mapping:\n", bmt->version, bmt->mapped_count); ++ for (i = 0; i < bmt->mapped_count; i++) ++ { ++ MSG(INIT, "\t0x%x -> 0x%x\n", bmt->table[i].bad_index, bmt->table[i].mapped_index); ++ } ++} ++ ++static bool match_bmt_signature(u8 * dat, u8 * oob) ++{ ++ ++ if (memcmp(dat + MAIN_SIGNATURE_OFFSET, MAIN_SIGNATURE, SIGNATURE_SIZE)) ++ { ++ return false; ++ } ++ ++ if (memcmp(oob + OOB_SIGNATURE_OFFSET, OOB_SIGNATURE, SIGNATURE_SIZE)) ++ { ++ MSG(INIT, "main signature match, oob signature doesn't match, but ignore\n"); ++ } ++ return true; ++} ++ ++static u8 cal_bmt_checksum(phys_bmt_struct * phys_table, int bmt_size) ++{ ++ int i; ++ u8 checksum = 0; ++ u8 *dat = (u8 *) phys_table; ++ ++ checksum += phys_table->header.version; ++ checksum += phys_table->header.mapped_count; ++ ++ dat += sizeof(phys_bmt_header); ++ for (i = 0; i < bmt_size * sizeof(bmt_entry); i++) ++ { ++ checksum += dat[i]; ++ } ++ ++ return checksum; ++} ++ ++ ++static int is_block_mapped(int index) ++{ ++ int i; ++ for (i = 0; i < bmt.mapped_count; i++) ++ { ++ if (index == bmt.table[i].mapped_index) ++ return i; ++ } ++ return -1; ++} ++ ++static bool is_page_used(u8 * dat, u8 * oob) ++{ ++ return ((oob[OOB_INDEX_OFFSET] != 0xFF) || (oob[OOB_INDEX_OFFSET + 1] != 0xFF)); ++} ++ ++static bool valid_bmt_data(phys_bmt_struct * phys_table) ++{ ++ int i; ++ u8 checksum = cal_bmt_checksum(phys_table, bmt_block_count); ++ ++ // checksum correct? ++ if (phys_table->header.checksum != checksum) ++ { ++ MSG(INIT, "BMT Data checksum error: %x %x\n", phys_table->header.checksum, checksum); ++ return false; ++ } ++ ++ MSG(INIT, "BMT Checksum is: 0x%x\n", phys_table->header.checksum); ++ ++ // block index correct? ++ for (i = 0; i < phys_table->header.mapped_count; i++) ++ { ++ if (phys_table->table[i].bad_index >= total_block_count || phys_table->table[i].mapped_index >= total_block_count || phys_table->table[i].mapped_index < system_block_count) ++ { ++ MSG(INIT, "index error: bad_index: %d, mapped_index: %d\n", phys_table->table[i].bad_index, phys_table->table[i].mapped_index); ++ return false; ++ } ++ } ++ ++ // pass check, valid bmt. ++ MSG(INIT, "Valid BMT, version v%d\n", phys_table->header.version); ++ return true; ++} ++ ++static void fill_nand_bmt_buffer(bmt_struct * bmt, u8 * dat, u8 * oob) ++{ ++ phys_bmt_struct phys_bmt; ++ ++ dump_bmt_info(bmt); ++ ++ // fill phys_bmt_struct structure with bmt_struct ++ memset(&phys_bmt, 0xFF, sizeof(phys_bmt)); ++ ++ memcpy(phys_bmt.header.signature, MAIN_SIGNATURE, SIGNATURE_SIZE); ++ phys_bmt.header.version = BMT_VERSION; ++ // phys_bmt.header.bad_count = bmt->bad_count; ++ phys_bmt.header.mapped_count = bmt->mapped_count; ++ memcpy(phys_bmt.table, bmt->table, sizeof(bmt_entry) * bmt_block_count); ++ ++ phys_bmt.header.checksum = cal_bmt_checksum(&phys_bmt, bmt_block_count); ++ ++ memcpy(dat + MAIN_SIGNATURE_OFFSET, &phys_bmt, sizeof(phys_bmt)); ++ memcpy(oob + OOB_SIGNATURE_OFFSET, OOB_SIGNATURE, SIGNATURE_SIZE); ++} ++ ++// return valid index if found BMT, else return 0 ++static int load_bmt_data(int start, int pool_size) ++{ ++ int bmt_index = start + pool_size - 1; // find from the end ++ phys_bmt_struct phys_table; ++ int i; ++ ++ MSG(INIT, "[%s]: begin to search BMT from block 0x%x\n", __FUNCTION__, bmt_index); ++ ++ for (bmt_index = start + pool_size - 1; bmt_index >= start; bmt_index--) ++ { ++ if (nand_block_bad_bmt(OFFSET(bmt_index))) ++ { ++ MSG(INIT, "Skip bad block: %d\n", bmt_index); ++ continue; ++ } ++ ++ if (!nand_read_page_bmt(PAGE_ADDR(bmt_index), dat_buf, oob_buf)) ++ { ++ MSG(INIT, "Error found when read block %d\n", bmt_index); ++ continue; ++ } ++ ++ if (!match_bmt_signature(dat_buf, oob_buf)) ++ { ++ continue; ++ } ++ ++ MSG(INIT, "Match bmt signature @ block: 0x%x\n", bmt_index); ++ ++ memcpy(&phys_table, dat_buf + MAIN_SIGNATURE_OFFSET, sizeof(phys_table)); ++ ++ if (!valid_bmt_data(&phys_table)) ++ { ++ MSG(INIT, "BMT data is not correct %d\n", bmt_index); ++ continue; ++ } else ++ { ++ bmt.mapped_count = phys_table.header.mapped_count; ++ bmt.version = phys_table.header.version; ++ // bmt.bad_count = phys_table.header.bad_count; ++ memcpy(bmt.table, phys_table.table, bmt.mapped_count * sizeof(bmt_entry)); ++ ++ MSG(INIT, "bmt found at block: %d, mapped block: %d\n", bmt_index, bmt.mapped_count); ++ ++ for (i = 0; i < bmt.mapped_count; i++) ++ { ++ if (!nand_block_bad_bmt(OFFSET(bmt.table[i].bad_index))) ++ { ++ MSG(INIT, "block 0x%x is not mark bad, should be power lost last time\n", bmt.table[i].bad_index); ++ mark_block_bad_bmt(OFFSET(bmt.table[i].bad_index)); ++ } ++ } ++ ++ return bmt_index; ++ } ++ } ++ ++ MSG(INIT, "bmt block not found!\n"); ++ return 0; ++} ++ ++/************************************************************************* ++* Find an available block and erase. * ++* start_from_end: if true, find available block from end of flash. * ++* else, find from the beginning of the pool * ++* need_erase: if true, all unmapped blocks in the pool will be erased * ++*************************************************************************/ ++static int find_available_block(bool start_from_end) ++{ ++ int i; // , j; ++ int block = system_block_count; ++ int direction; ++ // int avail_index = 0; ++ MSG(INIT, "Try to find_available_block, pool_erase: %d\n", pool_erased); ++ ++ // erase all un-mapped blocks in pool when finding avaliable block ++ if (!pool_erased) ++ { ++ MSG(INIT, "Erase all un-mapped blocks in pool\n"); ++ for (i = 0; i < bmt_block_count; i++) ++ { ++ if (block == bmt_block_index) ++ { ++ MSG(INIT, "Skip bmt block 0x%x\n", block); ++ continue; ++ } ++ ++ if (nand_block_bad_bmt(OFFSET(block + i))) ++ { ++ MSG(INIT, "Skip bad block 0x%x\n", block + i); ++ continue; ++ } ++//if(block==4095) ++//{ ++// continue; ++//} ++ ++ if (is_block_mapped(block + i) >= 0) ++ { ++ MSG(INIT, "Skip mapped block 0x%x\n", block + i); ++ continue; ++ } ++ ++ if (!nand_erase_bmt(OFFSET(block + i))) ++ { ++ MSG(INIT, "Erase block 0x%x failed\n", block + i); ++ mark_block_bad_bmt(OFFSET(block + i)); ++ } ++ } ++ ++ pool_erased = 1; ++ } ++ ++ if (start_from_end) ++ { ++ block = total_block_count - 1; ++ direction = -1; ++ } else ++ { ++ block = system_block_count; ++ direction = 1; ++ } ++ ++ for (i = 0; i < bmt_block_count; i++, block += direction) ++ { ++ if (block == bmt_block_index) ++ { ++ MSG(INIT, "Skip bmt block 0x%x\n", block); ++ continue; ++ } ++ ++ if (nand_block_bad_bmt(OFFSET(block))) ++ { ++ MSG(INIT, "Skip bad block 0x%x\n", block); ++ continue; ++ } ++ ++ if (is_block_mapped(block) >= 0) ++ { ++ MSG(INIT, "Skip mapped block 0x%x\n", block); ++ continue; ++ } ++ ++ MSG(INIT, "Find block 0x%x available\n", block); ++ return block; ++ } ++ ++ return 0; ++} ++ ++static unsigned short get_bad_index_from_oob(u8 * oob_buf) ++{ ++ unsigned short index; ++ memcpy(&index, oob_buf + OOB_INDEX_OFFSET, OOB_INDEX_SIZE); ++ ++ return index; ++} ++ ++void set_bad_index_to_oob(u8 * oob, u16 index) ++{ ++ memcpy(oob + OOB_INDEX_OFFSET, &index, sizeof(index)); ++} ++ ++static int migrate_from_bad(int offset, u8 * write_dat, u8 * write_oob) ++{ ++ int page; ++ int error_block = offset / BLOCK_SIZE_BMT; ++ int error_page = (offset / PAGE_SIZE_BMT) % page_per_block; ++ int to_index; ++ ++ memcpy(oob_buf, write_oob, MAX_OOB_SIZE); ++ ++ to_index = find_available_block(false); ++ ++ if (!to_index) ++ { ++ MSG(INIT, "Cannot find an available block for BMT\n"); ++ return 0; ++ } ++ ++ { // migrate error page first ++ MSG(INIT, "Write error page: 0x%x\n", error_page); ++ if (!write_dat) ++ { ++ nand_read_page_bmt(PAGE_ADDR(error_block) + error_page, dat_buf, NULL); ++ write_dat = dat_buf; ++ } ++ // memcpy(oob_buf, write_oob, MAX_OOB_SIZE); ++ ++ if (error_block < system_block_count) ++ set_bad_index_to_oob(oob_buf, error_block); // if error_block is already a mapped block, original mapping index is in OOB. ++ ++ if (!nand_write_page_bmt(PAGE_ADDR(to_index) + error_page, write_dat, oob_buf)) ++ { ++ MSG(INIT, "Write to page 0x%x fail\n", PAGE_ADDR(to_index) + error_page); ++ mark_block_bad_bmt(to_index); ++ return migrate_from_bad(offset, write_dat, write_oob); ++ } ++ } ++ ++ for (page = 0; page < page_per_block; page++) ++ { ++ if (page != error_page) ++ { ++ nand_read_page_bmt(PAGE_ADDR(error_block) + page, dat_buf, oob_buf); ++ if (is_page_used(dat_buf, oob_buf)) ++ { ++ if (error_block < system_block_count) ++ { ++ set_bad_index_to_oob(oob_buf, error_block); ++ } ++ MSG(INIT, "\tmigrate page 0x%x to page 0x%x\n", PAGE_ADDR(error_block) + page, PAGE_ADDR(to_index) + page); ++ if (!nand_write_page_bmt(PAGE_ADDR(to_index) + page, dat_buf, oob_buf)) ++ { ++ MSG(INIT, "Write to page 0x%x fail\n", PAGE_ADDR(to_index) + page); ++ mark_block_bad_bmt(to_index); ++ return migrate_from_bad(offset, write_dat, write_oob); ++ } ++ } ++ } ++ } ++ ++ MSG(INIT, "Migrate from 0x%x to 0x%x done!\n", error_block, to_index); ++ ++ return to_index; ++} ++ ++static bool write_bmt_to_flash(u8 * dat, u8 * oob) ++{ ++ bool need_erase = true; ++ MSG(INIT, "Try to write BMT\n"); ++ ++ if (bmt_block_index == 0) ++ { ++ // if we don't have index, we don't need to erase found block as it has been erased in find_available_block() ++ need_erase = false; ++ if (!(bmt_block_index = find_available_block(true))) ++ { ++ MSG(INIT, "Cannot find an available block for BMT\n"); ++ return false; ++ } ++ } ++ ++ MSG(INIT, "Find BMT block: 0x%x\n", bmt_block_index); ++ ++ // write bmt to flash ++ if (need_erase) ++ { ++ if (!nand_erase_bmt(OFFSET(bmt_block_index))) ++ { ++ MSG(INIT, "BMT block erase fail, mark bad: 0x%x\n", bmt_block_index); ++ mark_block_bad_bmt(OFFSET(bmt_block_index)); ++ // bmt.bad_count++; ++ ++ bmt_block_index = 0; ++ return write_bmt_to_flash(dat, oob); // recursive call ++ } ++ } ++ ++ if (!nand_write_page_bmt(PAGE_ADDR(bmt_block_index), dat, oob)) ++ { ++ MSG(INIT, "Write BMT data fail, need to write again\n"); ++ mark_block_bad_bmt(OFFSET(bmt_block_index)); ++ // bmt.bad_count++; ++ ++ bmt_block_index = 0; ++ return write_bmt_to_flash(dat, oob); // recursive call ++ } ++ ++ MSG(INIT, "Write BMT data to block 0x%x success\n", bmt_block_index); ++ return true; ++} ++ ++/******************************************************************* ++* Reconstruct bmt, called when found bmt info doesn't match bad ++* block info in flash. ++* ++* Return NULL for failure ++*******************************************************************/ ++bmt_struct *reconstruct_bmt(bmt_struct * bmt) ++{ ++ int i; ++ int index = system_block_count; ++ unsigned short bad_index; ++ int mapped; ++ ++ // init everything in BMT struct ++ bmt->version = BMT_VERSION; ++ bmt->bad_count = 0; ++ bmt->mapped_count = 0; ++ ++ memset(bmt->table, 0, bmt_block_count * sizeof(bmt_entry)); ++ ++ for (i = 0; i < bmt_block_count; i++, index++) ++ { ++ if (nand_block_bad_bmt(OFFSET(index))) ++ { ++ MSG(INIT, "Skip bad block: 0x%x\n", index); ++ // bmt->bad_count++; ++ continue; ++ } ++ ++ MSG(INIT, "read page: 0x%x\n", PAGE_ADDR(index)); ++ nand_read_page_bmt(PAGE_ADDR(index), dat_buf, oob_buf); ++ /* if (mtk_nand_read_page_hw(PAGE_ADDR(index), dat_buf)) ++ { ++ MSG(INIT, "Error when read block %d\n", bmt_block_index); ++ continue; ++ } */ ++ ++ if ((bad_index = get_bad_index_from_oob(oob_buf)) >= system_block_count) ++ { ++ MSG(INIT, "get bad index: 0x%x\n", bad_index); ++ if (bad_index != 0xFFFF) ++ MSG(INIT, "Invalid bad index found in block 0x%x, bad index 0x%x\n", index, bad_index); ++ continue; ++ } ++ ++ MSG(INIT, "Block 0x%x is mapped to bad block: 0x%x\n", index, bad_index); ++ ++ if (!nand_block_bad_bmt(OFFSET(bad_index))) ++ { ++ MSG(INIT, "\tbut block 0x%x is not marked as bad, invalid mapping\n", bad_index); ++ continue; // no need to erase here, it will be erased later when trying to write BMT ++ } ++ ++ if ((mapped = is_block_mapped(bad_index)) >= 0) ++ { ++ MSG(INIT, "bad block 0x%x is mapped to 0x%x, should be caused by power lost, replace with one\n", bmt->table[mapped].bad_index, bmt->table[mapped].mapped_index); ++ bmt->table[mapped].mapped_index = index; // use new one instead. ++ } else ++ { ++ // add mapping to BMT ++ bmt->table[bmt->mapped_count].bad_index = bad_index; ++ bmt->table[bmt->mapped_count].mapped_index = index; ++ bmt->mapped_count++; ++ } ++ ++ MSG(INIT, "Add mapping: 0x%x -> 0x%x to BMT\n", bad_index, index); ++ ++ } ++ ++ MSG(INIT, "Scan replace pool done, mapped block: %d\n", bmt->mapped_count); ++ // dump_bmt_info(bmt); ++ ++ // fill NAND BMT buffer ++ memset(oob_buf, 0xFF, sizeof(oob_buf)); ++ fill_nand_bmt_buffer(bmt, dat_buf, oob_buf); ++ ++ // write BMT back ++ if (!write_bmt_to_flash(dat_buf, oob_buf)) ++ { ++ MSG(INIT, "TRAGEDY: cannot find a place to write BMT!!!!\n"); ++ } ++ ++ return bmt; ++} ++ ++/******************************************************************* ++* [BMT Interface] ++* ++* Description: ++* Init bmt from nand. Reconstruct if not found or data error ++* ++* Parameter: ++* size: size of bmt and replace pool ++* ++* Return: ++* NULL for failure, and a bmt struct for success ++*******************************************************************/ ++bmt_struct *init_bmt(struct nand_chip * chip, int size) ++{ ++ struct mtk_nand_host *host; ++ ++ if (size > 0 && size < MAX_BMT_SIZE) ++ { ++ MSG(INIT, "Init bmt table, size: %d\n", size); ++ bmt_block_count = size; ++ } else ++ { ++ MSG(INIT, "Invalid bmt table size: %d\n", size); ++ return NULL; ++ } ++ nand_chip_bmt = chip; ++ system_block_count = chip->chipsize >> chip->phys_erase_shift; ++ total_block_count = bmt_block_count + system_block_count; ++ page_per_block = BLOCK_SIZE_BMT / PAGE_SIZE_BMT; ++ host = (struct mtk_nand_host *)chip->priv; ++ mtd_bmt = &host->mtd; ++ ++ MSG(INIT, "mtd_bmt: %p, nand_chip_bmt: %p\n", mtd_bmt, nand_chip_bmt); ++ MSG(INIT, "bmt count: %d, system count: %d\n", bmt_block_count, system_block_count); ++ ++ // set this flag, and unmapped block in pool will be erased. ++ pool_erased = 0; ++ memset(bmt.table, 0, size * sizeof(bmt_entry)); ++ if ((bmt_block_index = load_bmt_data(system_block_count, size))) ++ { ++ MSG(INIT, "Load bmt data success @ block 0x%x\n", bmt_block_index); ++ dump_bmt_info(&bmt); ++ return &bmt; ++ } else ++ { ++ MSG(INIT, "Load bmt data fail, need re-construct!\n"); ++#ifndef __UBOOT_NAND__ // BMT is not re-constructed in UBOOT. ++ if (reconstruct_bmt(&bmt)) ++ return &bmt; ++ else ++#endif ++ return NULL; ++ } ++} ++ ++/******************************************************************* ++* [BMT Interface] ++* ++* Description: ++* Update BMT. ++* ++* Parameter: ++* offset: update block/page offset. ++* reason: update reason, see update_reason_t for reason. ++* dat/oob: data and oob buffer for write fail. ++* ++* Return: ++* Return true for success, and false for failure. ++*******************************************************************/ ++bool update_bmt(u32 offset, update_reason_t reason, u8 * dat, u8 * oob) ++{ ++ int map_index; ++ int orig_bad_block = -1; ++ // int bmt_update_index; ++ int i; ++ int bad_index = offset / BLOCK_SIZE_BMT; ++ ++#ifndef MTK_NAND_BMT ++ return false; ++#endif ++ if (reason == UPDATE_WRITE_FAIL) ++ { ++ MSG(INIT, "Write fail, need to migrate\n"); ++ if (!(map_index = migrate_from_bad(offset, dat, oob))) ++ { ++ MSG(INIT, "migrate fail\n"); ++ return false; ++ } ++ } else ++ { ++ if (!(map_index = find_available_block(false))) ++ { ++ MSG(INIT, "Cannot find block in pool\n"); ++ return false; ++ } ++ } ++ ++ // now let's update BMT ++ if (bad_index >= system_block_count) // mapped block become bad, find original bad block ++ { ++ for (i = 0; i < bmt_block_count; i++) ++ { ++ if (bmt.table[i].mapped_index == bad_index) ++ { ++ orig_bad_block = bmt.table[i].bad_index; ++ break; ++ } ++ } ++ // bmt.bad_count++; ++ MSG(INIT, "Mapped block becomes bad, orig bad block is 0x%x\n", orig_bad_block); ++ ++ bmt.table[i].mapped_index = map_index; ++ } else ++ { ++ bmt.table[bmt.mapped_count].mapped_index = map_index; ++ bmt.table[bmt.mapped_count].bad_index = bad_index; ++ bmt.mapped_count++; ++ } ++ ++ memset(oob_buf, 0xFF, sizeof(oob_buf)); ++ fill_nand_bmt_buffer(&bmt, dat_buf, oob_buf); ++ if (!write_bmt_to_flash(dat_buf, oob_buf)) ++ return false; ++ ++ mark_block_bad_bmt(offset); ++ ++ return true; ++} ++ ++/******************************************************************* ++* [BMT Interface] ++* ++* Description: ++* Given an block index, return mapped index if it's mapped, else ++* return given index. ++* ++* Parameter: ++* index: given an block index. This value cannot exceed ++* system_block_count. ++* ++* Return NULL for failure ++*******************************************************************/ ++u16 get_mapping_block_index(int index) ++{ ++ int i; ++#ifndef MTK_NAND_BMT ++ return index; ++#endif ++ if (index > system_block_count) ++ { ++ return index; ++ } ++ ++ for (i = 0; i < bmt.mapped_count; i++) ++ { ++ if (bmt.table[i].bad_index == index) ++ { ++ return bmt.table[i].mapped_index; ++ } ++ } ++ ++ return index; ++} ++#ifdef __KERNEL_NAND__ ++EXPORT_SYMBOL_GPL(init_bmt); ++EXPORT_SYMBOL_GPL(update_bmt); ++EXPORT_SYMBOL_GPL(get_mapping_block_index); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("MediaTek"); ++MODULE_DESCRIPTION("Bad Block mapping management for MediaTek NAND Flash Driver"); ++#endif +diff --git a/drivers/mtd/nand/bmt.h b/drivers/mtd/nand/bmt.h +new file mode 100644 +index 0000000..2d30ea9 +--- /dev/null ++++ b/drivers/mtd/nand/bmt.h +@@ -0,0 +1,80 @@ ++#ifndef __BMT_H__ ++#define __BMT_H__ ++ ++#include "nand_def.h" ++ ++#if defined(__PRELOADER_NAND__) ++ ++#include "nand.h" ++ ++#elif defined(__UBOOT_NAND__) ++ ++#include <linux/mtd/nand.h> ++#include "mtk_nand.h" ++ ++#elif defined(__KERNEL_NAND__) ++ ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/nand.h> ++#include <linux/module.h> ++#include "mtk_nand.h" ++ ++#endif ++ ++ ++#define MAX_BMT_SIZE (0x80) ++#define BMT_VERSION (1) // initial version ++ ++#define MAIN_SIGNATURE_OFFSET (0) ++#define OOB_SIGNATURE_OFFSET (1) ++#define OOB_INDEX_OFFSET (29) ++#define OOB_INDEX_SIZE (2) ++#define FAKE_INDEX (0xAAAA) ++ ++typedef struct _bmt_entry_ ++{ ++ u16 bad_index; // bad block index ++ u16 mapped_index; // mapping block index in the replace pool ++} bmt_entry; ++ ++typedef enum ++{ ++ UPDATE_ERASE_FAIL, ++ UPDATE_WRITE_FAIL, ++ UPDATE_UNMAPPED_BLOCK, ++ UPDATE_REASON_COUNT, ++} update_reason_t; ++ ++typedef struct ++{ ++ bmt_entry table[MAX_BMT_SIZE]; ++ u8 version; ++ u8 mapped_count; // mapped block count in pool ++ u8 bad_count; // bad block count in pool. Not used in V1 ++} bmt_struct; ++ ++/*************************************************************** ++* * ++* Interface BMT need to use * ++* * ++***************************************************************/ ++extern bool mtk_nand_exec_read_page(struct mtd_info *mtd, u32 row, u32 page_size, u8 * dat, u8 * oob); ++extern int mtk_nand_block_bad_hw(struct mtd_info *mtd, loff_t ofs); ++extern int mtk_nand_erase_hw(struct mtd_info *mtd, int page); ++extern int mtk_nand_block_markbad_hw(struct mtd_info *mtd, loff_t ofs); ++extern int mtk_nand_exec_write_page(struct mtd_info *mtd, u32 row, u32 page_size, u8 * dat, u8 * oob); ++ ++ ++/*************************************************************** ++* * ++* Different function interface for preloader/uboot/kernel * ++* * ++***************************************************************/ ++void set_bad_index_to_oob(u8 * oob, u16 index); ++ ++ ++bmt_struct *init_bmt(struct nand_chip *nand, int size); ++bool update_bmt(u32 offset, update_reason_t reason, u8 * dat, u8 * oob); ++unsigned short get_mapping_block_index(int index); ++ ++#endif // #ifndef __BMT_H__ +diff --git a/drivers/mtd/nand/dev-nand.c b/drivers/mtd/nand/dev-nand.c +new file mode 100644 +index 0000000..9fb5235 +--- /dev/null ++++ b/drivers/mtd/nand/dev-nand.c +@@ -0,0 +1,63 @@ ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/platform_device.h> ++ ++#include "mt6575_typedefs.h" ++ ++#define RALINK_NAND_CTRL_BASE 0xBE003000 ++#define NFI_base RALINK_NAND_CTRL_BASE ++#define RALINK_NANDECC_CTRL_BASE 0xBE003800 ++#define NFIECC_base RALINK_NANDECC_CTRL_BASE ++#define MT7621_NFI_IRQ_ID SURFBOARDINT_NAND ++#define MT7621_NFIECC_IRQ_ID SURFBOARDINT_NAND_ECC ++ ++#define SURFBOARDINT_NAND 22 ++#define SURFBOARDINT_NAND_ECC 23 ++ ++static struct resource MT7621_resource_nand[] = { ++ { ++ .start = NFI_base, ++ .end = NFI_base + 0x1A0, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = NFIECC_base, ++ .end = NFIECC_base + 0x150, ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .start = MT7621_NFI_IRQ_ID, ++ .flags = IORESOURCE_IRQ, ++ }, ++ { ++ .start = MT7621_NFIECC_IRQ_ID, ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device MT7621_nand_dev = { ++ .name = "MT7621-NAND", ++ .id = 0, ++ .num_resources = ARRAY_SIZE(MT7621_resource_nand), ++ .resource = MT7621_resource_nand, ++ .dev = { ++ .platform_data = &mt7621_nand_hw, ++ }, ++}; ++ ++ ++int __init mtk_nand_register(void) ++{ ++ ++ int retval = 0; ++ ++ retval = platform_device_register(&MT7621_nand_dev); ++ if (retval != 0) { ++ printk(KERN_ERR "register nand device fail\n"); ++ return retval; ++ } ++ ++ ++ return retval; ++} ++arch_initcall(mtk_nand_register); +diff --git a/drivers/mtd/nand/mt6575_typedefs.h b/drivers/mtd/nand/mt6575_typedefs.h +new file mode 100644 +index 0000000..a7b9647 +--- /dev/null ++++ b/drivers/mtd/nand/mt6575_typedefs.h +@@ -0,0 +1,340 @@ ++/* Copyright Statement: ++ * ++ * This software/firmware and related documentation ("MediaTek Software") are ++ * protected under relevant copyright laws. The information contained herein ++ * is confidential and proprietary to MediaTek Inc. and/or its licensors. ++ * Without the prior written permission of MediaTek inc. and/or its licensors, ++ * any reproduction, modification, use or disclosure of MediaTek Software, ++ * and information contained herein, in whole or in part, shall be strictly prohibited. ++ */ ++/* MediaTek Inc. (C) 2010. All rights reserved. ++ * ++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES ++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") ++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON ++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. ++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR ++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH ++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES ++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES ++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK ++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR ++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND ++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, ++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, ++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO ++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. ++ * ++ * The following software/firmware and/or related documentation ("MediaTek Software") ++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's ++ * applicable license agreements with MediaTek Inc. ++ */ ++ ++/***************************************************************************** ++* Copyright Statement: ++* -------------------- ++* This software is protected by Copyright and the information contained ++* herein is confidential. The software may not be copied and the information ++* contained herein may not be used or disclosed except with the written ++* permission of MediaTek Inc. (C) 2008 ++* ++* BY OPENING THIS FILE, BUYER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES ++* THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") ++* RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO BUYER ON ++* AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, ++* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF ++* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. ++* NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ++* SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR ++* SUPPLIED WITH THE MEDIATEK SOFTWARE, AND BUYER AGREES TO LOOK ONLY TO SUCH ++* THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. MEDIATEK SHALL ALSO ++* NOT BE RESPONSIBLE FOR ANY MEDIATEK SOFTWARE RELEASES MADE TO BUYER'S ++* SPECIFICATION OR TO CONFORM TO A PARTICULAR STANDARD OR OPEN FORUM. ++* ++* BUYER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND CUMULATIVE ++* LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, ++* AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, ++* OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY BUYER TO ++* MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. ++* ++* THE TRANSACTION CONTEMPLATED HEREUNDER SHALL BE CONSTRUED IN ACCORDANCE ++* WITH THE LAWS OF THE STATE OF CALIFORNIA, USA, EXCLUDING ITS CONFLICT OF ++* LAWS PRINCIPLES. ANY DISPUTES, CONTROVERSIES OR CLAIMS ARISING THEREOF AND ++* RELATED THERETO SHALL BE SETTLED BY ARBITRATION IN SAN FRANCISCO, CA, UNDER ++* THE RULES OF THE INTERNATIONAL CHAMBER OF COMMERCE (ICC). ++* ++*****************************************************************************/ ++ ++#ifndef _MT6575_TYPEDEFS_H ++#define _MT6575_TYPEDEFS_H ++ ++#if defined (__KERNEL_NAND__) ++#include <linux/bug.h> ++#else ++#define true 1 ++#define false 0 ++#define bool u8 ++#endif ++ ++// --------------------------------------------------------------------------- ++// Basic Type Definitions ++// --------------------------------------------------------------------------- ++ ++typedef volatile unsigned char *P_kal_uint8; ++typedef volatile unsigned short *P_kal_uint16; ++typedef volatile unsigned int *P_kal_uint32; ++ ++typedef long LONG; ++typedef unsigned char UBYTE; ++typedef short SHORT; ++ ++typedef signed char kal_int8; ++typedef signed short kal_int16; ++typedef signed int kal_int32; ++typedef long long kal_int64; ++typedef unsigned char kal_uint8; ++typedef unsigned short kal_uint16; ++typedef unsigned int kal_uint32; ++typedef unsigned long long kal_uint64; ++typedef char kal_char; ++ ++typedef unsigned int *UINT32P; ++typedef volatile unsigned short *UINT16P; ++typedef volatile unsigned char *UINT8P; ++typedef unsigned char *U8P; ++ ++typedef volatile unsigned char *P_U8; ++typedef volatile signed char *P_S8; ++typedef volatile unsigned short *P_U16; ++typedef volatile signed short *P_S16; ++typedef volatile unsigned int *P_U32; ++typedef volatile signed int *P_S32; ++typedef unsigned long long *P_U64; ++typedef signed long long *P_S64; ++ ++typedef unsigned char U8; ++typedef signed char S8; ++typedef unsigned short U16; ++typedef signed short S16; ++typedef unsigned int U32; ++typedef signed int S32; ++typedef unsigned long long U64; ++typedef signed long long S64; ++//typedef unsigned char bool; ++ ++typedef unsigned char UINT8; ++typedef unsigned short UINT16; ++typedef unsigned int UINT32; ++typedef unsigned short USHORT; ++typedef signed char INT8; ++typedef signed short INT16; ++typedef signed int INT32; ++typedef unsigned int DWORD; ++typedef void VOID; ++typedef unsigned char BYTE; ++typedef float FLOAT; ++ ++typedef char *LPCSTR; ++typedef short *LPWSTR; ++ ++ ++// --------------------------------------------------------------------------- ++// Constants ++// --------------------------------------------------------------------------- ++ ++#define IMPORT EXTERN ++#ifndef __cplusplus ++ #define EXTERN extern ++#else ++ #define EXTERN extern "C" ++#endif ++#define LOCAL static ++#define GLOBAL ++#define EXPORT GLOBAL ++ ++#define EQ == ++#define NEQ != ++#define AND && ++#define OR || ++#define XOR(A,B) ((!(A) AND (B)) OR ((A) AND !(B))) ++ ++#ifndef FALSE ++ #define FALSE (0) ++#endif ++ ++#ifndef TRUE ++ #define TRUE (1) ++#endif ++ ++#ifndef NULL ++ #define NULL (0) ++#endif ++ ++//enum boolean {false, true}; ++enum {RX, TX, NONE}; ++ ++#ifndef BOOL ++typedef unsigned char BOOL; ++#endif ++ ++typedef enum { ++ KAL_FALSE = 0, ++ KAL_TRUE = 1, ++} kal_bool; ++ ++ ++// --------------------------------------------------------------------------- ++// Type Casting ++// --------------------------------------------------------------------------- ++ ++#define AS_INT32(x) (*(INT32 *)((void*)x)) ++#define AS_INT16(x) (*(INT16 *)((void*)x)) ++#define AS_INT8(x) (*(INT8 *)((void*)x)) ++ ++#define AS_UINT32(x) (*(UINT32 *)((void*)x)) ++#define AS_UINT16(x) (*(UINT16 *)((void*)x)) ++#define AS_UINT8(x) (*(UINT8 *)((void*)x)) ++ ++ ++// --------------------------------------------------------------------------- ++// Register Manipulations ++// --------------------------------------------------------------------------- ++ ++#define READ_REGISTER_UINT32(reg) \ ++ (*(volatile UINT32 * const)(reg)) ++ ++#define WRITE_REGISTER_UINT32(reg, val) \ ++ (*(volatile UINT32 * const)(reg)) = (val) ++ ++#define READ_REGISTER_UINT16(reg) \ ++ (*(volatile UINT16 * const)(reg)) ++ ++#define WRITE_REGISTER_UINT16(reg, val) \ ++ (*(volatile UINT16 * const)(reg)) = (val) ++ ++#define READ_REGISTER_UINT8(reg) \ ++ (*(volatile UINT8 * const)(reg)) ++ ++#define WRITE_REGISTER_UINT8(reg, val) \ ++ (*(volatile UINT8 * const)(reg)) = (val) ++ ++#define INREG8(x) READ_REGISTER_UINT8((UINT8*)((void*)(x))) ++#define OUTREG8(x, y) WRITE_REGISTER_UINT8((UINT8*)((void*)(x)), (UINT8)(y)) ++#define SETREG8(x, y) OUTREG8(x, INREG8(x)|(y)) ++#define CLRREG8(x, y) OUTREG8(x, INREG8(x)&~(y)) ++#define MASKREG8(x, y, z) OUTREG8(x, (INREG8(x)&~(y))|(z)) ++ ++#define INREG16(x) READ_REGISTER_UINT16((UINT16*)((void*)(x))) ++#define OUTREG16(x, y) WRITE_REGISTER_UINT16((UINT16*)((void*)(x)),(UINT16)(y)) ++#define SETREG16(x, y) OUTREG16(x, INREG16(x)|(y)) ++#define CLRREG16(x, y) OUTREG16(x, INREG16(x)&~(y)) ++#define MASKREG16(x, y, z) OUTREG16(x, (INREG16(x)&~(y))|(z)) ++ ++#define INREG32(x) READ_REGISTER_UINT32((UINT32*)((void*)(x))) ++#define OUTREG32(x, y) WRITE_REGISTER_UINT32((UINT32*)((void*)(x)), (UINT32)(y)) ++#define SETREG32(x, y) OUTREG32(x, INREG32(x)|(y)) ++#define CLRREG32(x, y) OUTREG32(x, INREG32(x)&~(y)) ++#define MASKREG32(x, y, z) OUTREG32(x, (INREG32(x)&~(y))|(z)) ++ ++ ++#define DRV_Reg8(addr) INREG8(addr) ++#define DRV_WriteReg8(addr, data) OUTREG8(addr, data) ++#define DRV_SetReg8(addr, data) SETREG8(addr, data) ++#define DRV_ClrReg8(addr, data) CLRREG8(addr, data) ++ ++#define DRV_Reg16(addr) INREG16(addr) ++#define DRV_WriteReg16(addr, data) OUTREG16(addr, data) ++#define DRV_SetReg16(addr, data) SETREG16(addr, data) ++#define DRV_ClrReg16(addr, data) CLRREG16(addr, data) ++ ++#define DRV_Reg32(addr) INREG32(addr) ++#define DRV_WriteReg32(addr, data) OUTREG32(addr, data) ++#define DRV_SetReg32(addr, data) SETREG32(addr, data) ++#define DRV_ClrReg32(addr, data) CLRREG32(addr, data) ++ ++// !!! DEPRECATED, WILL BE REMOVED LATER !!! ++#define DRV_Reg(addr) DRV_Reg16(addr) ++#define DRV_WriteReg(addr, data) DRV_WriteReg16(addr, data) ++#define DRV_SetReg(addr, data) DRV_SetReg16(addr, data) ++#define DRV_ClrReg(addr, data) DRV_ClrReg16(addr, data) ++ ++ ++// --------------------------------------------------------------------------- ++// Compiler Time Deduction Macros ++// --------------------------------------------------------------------------- ++ ++#define _MASK_OFFSET_1(x, n) ((x) & 0x1) ? (n) : ++#define _MASK_OFFSET_2(x, n) _MASK_OFFSET_1((x), (n)) _MASK_OFFSET_1((x) >> 1, (n) + 1) ++#define _MASK_OFFSET_4(x, n) _MASK_OFFSET_2((x), (n)) _MASK_OFFSET_2((x) >> 2, (n) + 2) ++#define _MASK_OFFSET_8(x, n) _MASK_OFFSET_4((x), (n)) _MASK_OFFSET_4((x) >> 4, (n) + 4) ++#define _MASK_OFFSET_16(x, n) _MASK_OFFSET_8((x), (n)) _MASK_OFFSET_8((x) >> 8, (n) + 8) ++#define _MASK_OFFSET_32(x, n) _MASK_OFFSET_16((x), (n)) _MASK_OFFSET_16((x) >> 16, (n) + 16) ++ ++#define MASK_OFFSET_ERROR (0xFFFFFFFF) ++ ++#define MASK_OFFSET(x) (_MASK_OFFSET_32(x, 0) MASK_OFFSET_ERROR) ++ ++ ++// --------------------------------------------------------------------------- ++// Assertions ++// --------------------------------------------------------------------------- ++ ++#ifndef ASSERT ++ #define ASSERT(expr) BUG_ON(!(expr)) ++#endif ++ ++#ifndef NOT_IMPLEMENTED ++ #define NOT_IMPLEMENTED() BUG_ON(1) ++#endif ++ ++#define STATIC_ASSERT(pred) STATIC_ASSERT_X(pred, __LINE__) ++#define STATIC_ASSERT_X(pred, line) STATIC_ASSERT_XX(pred, line) ++#define STATIC_ASSERT_XX(pred, line) \ ++ extern char assertion_failed_at_##line[(pred) ? 1 : -1] ++ ++// --------------------------------------------------------------------------- ++// Resolve Compiler Warnings ++// --------------------------------------------------------------------------- ++ ++#define NOT_REFERENCED(x) { (x) = (x); } ++ ++ ++// --------------------------------------------------------------------------- ++// Utilities ++// --------------------------------------------------------------------------- ++ ++#define MAXIMUM(A,B) (((A)>(B))?(A):(B)) ++#define MINIMUM(A,B) (((A)<(B))?(A):(B)) ++ ++#define ARY_SIZE(x) (sizeof((x)) / sizeof((x[0]))) ++#define DVT_DELAYMACRO(u4Num) \ ++{ \ ++ UINT32 u4Count = 0 ; \ ++ for (u4Count = 0; u4Count < u4Num; u4Count++ ); \ ++} \ ++ ++#define A68351B 0 ++#define B68351B 1 ++#define B68351D 2 ++#define B68351E 3 ++#define UNKNOWN_IC_VERSION 0xFF ++ ++/* NAND driver */ ++struct mtk_nand_host_hw { ++ unsigned int nfi_bus_width; /* NFI_BUS_WIDTH */ ++ unsigned int nfi_access_timing; /* NFI_ACCESS_TIMING */ ++ unsigned int nfi_cs_num; /* NFI_CS_NUM */ ++ unsigned int nand_sec_size; /* NAND_SECTOR_SIZE */ ++ unsigned int nand_sec_shift; /* NAND_SECTOR_SHIFT */ ++ unsigned int nand_ecc_size; ++ unsigned int nand_ecc_bytes; ++ unsigned int nand_ecc_mode; ++}; ++extern struct mtk_nand_host_hw mt7621_nand_hw; ++extern unsigned int CFG_BLOCKSIZE; ++ ++#endif // _MT6575_TYPEDEFS_H ++ +diff --git a/drivers/mtd/nand/mtk_nand.c b/drivers/mtd/nand/mtk_nand.c +new file mode 100644 +index 0000000..00e150c +--- /dev/null ++++ b/drivers/mtd/nand/mtk_nand.c +@@ -0,0 +1,2304 @@ ++/****************************************************************************** ++* mtk_nand.c - MTK NAND Flash Device Driver ++ * ++* Copyright 2009-2012 MediaTek Co.,Ltd. ++ * ++* DESCRIPTION: ++* This file provid the other drivers nand relative functions ++ * ++* modification history ++* ---------------------------------------- ++* v3.0, 11 Feb 2010, mtk ++* ---------------------------------------- ++******************************************************************************/ ++#include "nand_def.h" ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/delay.h> ++#include <linux/errno.h> ++#include <linux/sched.h> ++#include <linux/types.h> ++#include <linux/wait.h> ++#include <linux/spinlock.h> ++#include <linux/interrupt.h> ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/nand.h> ++#include <linux/mtd/partitions.h> ++#include <linux/mtd/nand_ecc.h> ++#include <linux/dma-mapping.h> ++#include <linux/jiffies.h> ++#include <linux/platform_device.h> ++#include <linux/proc_fs.h> ++#include <linux/time.h> ++#include <linux/mm.h> ++#include <asm/io.h> ++#include <asm/cacheflush.h> ++#include <asm/uaccess.h> ++#include <linux/miscdevice.h> ++#include "mtk_nand.h" ++#include "nand_device_list.h" ++ ++#include "bmt.h" ++#include "partition.h" ++ ++unsigned int CFG_BLOCKSIZE; ++ ++static int shift_on_bbt = 0; ++extern void nand_bbt_set(struct mtd_info *mtd, int page, int flag); ++extern int nand_bbt_get(struct mtd_info *mtd, int page); ++int mtk_nand_read_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page); ++ ++static const char * const probe_types[] = { "cmdlinepart", "ofpart", NULL }; ++ ++#define NAND_CMD_STATUS_MULTI 0x71 ++ ++void show_stack(struct task_struct *tsk, unsigned long *sp); ++extern void mt_irq_set_sens(unsigned int irq, unsigned int sens); ++extern void mt_irq_set_polarity(unsigned int irq,unsigned int polarity); ++ ++struct mtk_nand_host mtk_nand_host; /* include mtd_info and nand_chip structs */ ++struct mtk_nand_host_hw mt7621_nand_hw = { ++ .nfi_bus_width = 8, ++ .nfi_access_timing = NFI_DEFAULT_ACCESS_TIMING, ++ .nfi_cs_num = NFI_CS_NUM, ++ .nand_sec_size = 512, ++ .nand_sec_shift = 9, ++ .nand_ecc_size = 2048, ++ .nand_ecc_bytes = 32, ++ .nand_ecc_mode = NAND_ECC_HW, ++}; ++ ++ ++/******************************************************************************* ++ * Gloable Varible Definition ++ *******************************************************************************/ ++ ++#define NFI_ISSUE_COMMAND(cmd, col_addr, row_addr, col_num, row_num) \ ++ do { \ ++ DRV_WriteReg(NFI_CMD_REG16,cmd);\ ++ while (DRV_Reg32(NFI_STA_REG32) & STA_CMD_STATE);\ ++ DRV_WriteReg32(NFI_COLADDR_REG32, col_addr);\ ++ DRV_WriteReg32(NFI_ROWADDR_REG32, row_addr);\ ++ DRV_WriteReg(NFI_ADDRNOB_REG16, col_num | (row_num<<ADDR_ROW_NOB_SHIFT));\ ++ while (DRV_Reg32(NFI_STA_REG32) & STA_ADDR_STATE);\ ++ }while(0); ++ ++//------------------------------------------------------------------------------- ++static struct NAND_CMD g_kCMD; ++static u32 g_u4ChipVer; ++bool g_bInitDone; ++static bool g_bcmdstatus; ++static u32 g_value = 0; ++static int g_page_size; ++ ++BOOL g_bHwEcc = true; ++ ++ ++static u8 *local_buffer_16_align; // 16 byte aligned buffer, for HW issue ++static u8 local_buffer[4096 + 512]; ++ ++extern void nand_release_device(struct mtd_info *mtd); ++extern int nand_get_device(struct nand_chip *chip, struct mtd_info *mtd, int new_state); ++ ++#if defined(MTK_NAND_BMT) ++static bmt_struct *g_bmt; ++#endif ++struct mtk_nand_host *host; ++extern struct mtd_partition g_pasStatic_Partition[]; ++int part_num = NUM_PARTITIONS; ++int manu_id; ++int dev_id; ++ ++static u8 local_oob_buf[NAND_MAX_OOBSIZE]; ++ ++static u8 nand_badblock_offset = 0; ++ ++void nand_enable_clock(void) ++{ ++ //enable_clock(MT65XX_PDN_PERI_NFI, "NAND"); ++} ++ ++void nand_disable_clock(void) ++{ ++ //disable_clock(MT65XX_PDN_PERI_NFI, "NAND"); ++} ++ ++static struct nand_ecclayout nand_oob_16 = { ++ .eccbytes = 8, ++ .eccpos = {8, 9, 10, 11, 12, 13, 14, 15}, ++ .oobfree = {{1, 6}, {0, 0}} ++}; ++ ++struct nand_ecclayout nand_oob_64 = { ++ .eccbytes = 32, ++ .eccpos = {32, 33, 34, 35, 36, 37, 38, 39, ++ 40, 41, 42, 43, 44, 45, 46, 47, ++ 48, 49, 50, 51, 52, 53, 54, 55, ++ 56, 57, 58, 59, 60, 61, 62, 63}, ++ .oobfree = {{1, 7}, {9, 7}, {17, 7}, {25, 6}, {0, 0}} ++}; ++ ++struct nand_ecclayout nand_oob_128 = { ++ .eccbytes = 64, ++ .eccpos = { ++ 64, 65, 66, 67, 68, 69, 70, 71, ++ 72, 73, 74, 75, 76, 77, 78, 79, ++ 80, 81, 82, 83, 84, 85, 86, 86, ++ 88, 89, 90, 91, 92, 93, 94, 95, ++ 96, 97, 98, 99, 100, 101, 102, 103, ++ 104, 105, 106, 107, 108, 109, 110, 111, ++ 112, 113, 114, 115, 116, 117, 118, 119, ++ 120, 121, 122, 123, 124, 125, 126, 127}, ++ .oobfree = {{1, 7}, {9, 7}, {17, 7}, {25, 7}, {33, 7}, {41, 7}, {49, 7}, {57, 6}} ++}; ++ ++flashdev_info devinfo; ++ ++void dump_nfi(void) ++{ ++} ++ ++void dump_ecc(void) ++{ ++} ++ ++u32 ++nand_virt_to_phys_add(u32 va) ++{ ++ u32 pageOffset = (va & (PAGE_SIZE - 1)); ++ pgd_t *pgd; ++ pmd_t *pmd; ++ pte_t *pte; ++ u32 pa; ++ ++ if (virt_addr_valid(va)) ++ return __virt_to_phys(va); ++ ++ if (NULL == current) { ++ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR ,current is NULL! \n"); ++ return 0; ++ } ++ ++ if (NULL == current->mm) { ++ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR current->mm is NULL! tgid=0x%x, name=%s \n", current->tgid, current->comm); ++ return 0; ++ } ++ ++ pgd = pgd_offset(current->mm, va); /* what is tsk->mm */ ++ if (pgd_none(*pgd) || pgd_bad(*pgd)) { ++ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR, va=0x%x, pgd invalid! \n", va); ++ return 0; ++ } ++ ++ pmd = pmd_offset((pud_t *)pgd, va); ++ if (pmd_none(*pmd) || pmd_bad(*pmd)) { ++ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR, va=0x%x, pmd invalid! \n", va); ++ return 0; ++ } ++ ++ pte = pte_offset_map(pmd, va); ++ if (pte_present(*pte)) { ++ pa = (pte_val(*pte) & (PAGE_MASK)) | pageOffset; ++ return pa; ++ } ++ ++ printk(KERN_ERR "[nand_virt_to_phys_add] ERROR va=0x%x, pte invalid! \n", va); ++ return 0; ++} ++EXPORT_SYMBOL(nand_virt_to_phys_add); ++ ++bool ++get_device_info(u16 id, u32 ext_id, flashdev_info * pdevinfo) ++{ ++ u32 index; ++ for (index = 0; gen_FlashTable[index].id != 0; index++) { ++ if (id == gen_FlashTable[index].id && ext_id == gen_FlashTable[index].ext_id) { ++ pdevinfo->id = gen_FlashTable[index].id; ++ pdevinfo->ext_id = gen_FlashTable[index].ext_id; ++ pdevinfo->blocksize = gen_FlashTable[index].blocksize; ++ pdevinfo->addr_cycle = gen_FlashTable[index].addr_cycle; ++ pdevinfo->iowidth = gen_FlashTable[index].iowidth; ++ pdevinfo->timmingsetting = gen_FlashTable[index].timmingsetting; ++ pdevinfo->advancedmode = gen_FlashTable[index].advancedmode; ++ pdevinfo->pagesize = gen_FlashTable[index].pagesize; ++ pdevinfo->sparesize = gen_FlashTable[index].sparesize; ++ pdevinfo->totalsize = gen_FlashTable[index].totalsize; ++ memcpy(pdevinfo->devciename, gen_FlashTable[index].devciename, sizeof(pdevinfo->devciename)); ++ printk(KERN_INFO "Device found in MTK table, ID: %x, EXT_ID: %x\n", id, ext_id); ++ ++ goto find; ++ } ++ } ++ ++find: ++ if (0 == pdevinfo->id) { ++ printk(KERN_INFO "Device not found, ID: %x\n", id); ++ return false; ++ } else { ++ return true; ++ } ++} ++ ++static void ++ECC_Config(struct mtk_nand_host_hw *hw,u32 ecc_bit) ++{ ++ u32 u4ENCODESize; ++ u32 u4DECODESize; ++ u32 ecc_bit_cfg = ECC_CNFG_ECC4; ++ ++ switch(ecc_bit){ ++ case 4: ++ ecc_bit_cfg = ECC_CNFG_ECC4; ++ break; ++ case 8: ++ ecc_bit_cfg = ECC_CNFG_ECC8; ++ break; ++ case 10: ++ ecc_bit_cfg = ECC_CNFG_ECC10; ++ break; ++ case 12: ++ ecc_bit_cfg = ECC_CNFG_ECC12; ++ break; ++ default: ++ break; ++ } ++ DRV_WriteReg16(ECC_DECCON_REG16, DEC_DE); ++ do { ++ } while (!DRV_Reg16(ECC_DECIDLE_REG16)); ++ ++ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_DE); ++ do { ++ } while (!DRV_Reg32(ECC_ENCIDLE_REG32)); ++ ++ /* setup FDM register base */ ++ DRV_WriteReg32(ECC_FDMADDR_REG32, NFI_FDM0L_REG32); ++ ++ /* Sector + FDM */ ++ u4ENCODESize = (hw->nand_sec_size + 8) << 3; ++ /* Sector + FDM + YAFFS2 meta data bits */ ++ u4DECODESize = ((hw->nand_sec_size + 8) << 3) + ecc_bit * 13; ++ ++ /* configure ECC decoder && encoder */ ++ DRV_WriteReg32(ECC_DECCNFG_REG32, ecc_bit_cfg | DEC_CNFG_NFI | DEC_CNFG_EMPTY_EN | (u4DECODESize << DEC_CNFG_CODE_SHIFT)); ++ ++ DRV_WriteReg32(ECC_ENCCNFG_REG32, ecc_bit_cfg | ENC_CNFG_NFI | (u4ENCODESize << ENC_CNFG_MSG_SHIFT)); ++ NFI_SET_REG32(ECC_DECCNFG_REG32, DEC_CNFG_EL); ++} ++ ++static void ++ECC_Decode_Start(void) ++{ ++ while (!(DRV_Reg16(ECC_DECIDLE_REG16) & DEC_IDLE)) ++ ; ++ DRV_WriteReg16(ECC_DECCON_REG16, DEC_EN); ++} ++ ++static void ++ECC_Decode_End(void) ++{ ++ while (!(DRV_Reg16(ECC_DECIDLE_REG16) & DEC_IDLE)) ++ ; ++ DRV_WriteReg16(ECC_DECCON_REG16, DEC_DE); ++} ++ ++static void ++ECC_Encode_Start(void) ++{ ++ while (!(DRV_Reg32(ECC_ENCIDLE_REG32) & ENC_IDLE)) ++ ; ++ mb(); ++ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_EN); ++} ++ ++static void ++ECC_Encode_End(void) ++{ ++ /* wait for device returning idle */ ++ while (!(DRV_Reg32(ECC_ENCIDLE_REG32) & ENC_IDLE)) ; ++ mb(); ++ DRV_WriteReg16(ECC_ENCCON_REG16, ENC_DE); ++} ++ ++static bool ++mtk_nand_check_bch_error(struct mtd_info *mtd, u8 * pDataBuf, u32 u4SecIndex, u32 u4PageAddr) ++{ ++ bool bRet = true; ++ u16 u2SectorDoneMask = 1 << u4SecIndex; ++ u32 u4ErrorNumDebug, i, u4ErrNum; ++ u32 timeout = 0xFFFF; ++ // int el; ++ u32 au4ErrBitLoc[6]; ++ u32 u4ErrByteLoc, u4BitOffset; ++ u32 u4ErrBitLoc1th, u4ErrBitLoc2nd; ++ ++ //4 // Wait for Decode Done ++ while (0 == (u2SectorDoneMask & DRV_Reg16(ECC_DECDONE_REG16))) { ++ timeout--; ++ if (0 == timeout) ++ return false; ++ } ++ /* We will manually correct the error bits in the last sector, not all the sectors of the page! */ ++ memset(au4ErrBitLoc, 0x0, sizeof(au4ErrBitLoc)); ++ u4ErrorNumDebug = DRV_Reg32(ECC_DECENUM_REG32); ++ u4ErrNum = DRV_Reg32(ECC_DECENUM_REG32) >> (u4SecIndex << 2); ++ u4ErrNum &= 0xF; ++ ++ if (u4ErrNum) { ++ if (0xF == u4ErrNum) { ++ mtd->ecc_stats.failed++; ++ bRet = false; ++ //printk(KERN_ERR"UnCorrectable at PageAddr=%d\n", u4PageAddr); ++ } else { ++ for (i = 0; i < ((u4ErrNum + 1) >> 1); ++i) { ++ au4ErrBitLoc[i] = DRV_Reg32(ECC_DECEL0_REG32 + i); ++ u4ErrBitLoc1th = au4ErrBitLoc[i] & 0x1FFF; ++ if (u4ErrBitLoc1th < 0x1000) { ++ u4ErrByteLoc = u4ErrBitLoc1th / 8; ++ u4BitOffset = u4ErrBitLoc1th % 8; ++ pDataBuf[u4ErrByteLoc] = pDataBuf[u4ErrByteLoc] ^ (1 << u4BitOffset); ++ mtd->ecc_stats.corrected++; ++ } else { ++ mtd->ecc_stats.failed++; ++ } ++ u4ErrBitLoc2nd = (au4ErrBitLoc[i] >> 16) & 0x1FFF; ++ if (0 != u4ErrBitLoc2nd) { ++ if (u4ErrBitLoc2nd < 0x1000) { ++ u4ErrByteLoc = u4ErrBitLoc2nd / 8; ++ u4BitOffset = u4ErrBitLoc2nd % 8; ++ pDataBuf[u4ErrByteLoc] = pDataBuf[u4ErrByteLoc] ^ (1 << u4BitOffset); ++ mtd->ecc_stats.corrected++; ++ } else { ++ mtd->ecc_stats.failed++; ++ //printk(KERN_ERR"UnCorrectable High ErrLoc=%d\n", au4ErrBitLoc[i]); ++ } ++ } ++ } ++ } ++ if (0 == (DRV_Reg16(ECC_DECFER_REG16) & (1 << u4SecIndex))) ++ bRet = false; ++ } ++ return bRet; ++} ++ ++static bool ++mtk_nand_RFIFOValidSize(u16 u2Size) ++{ ++ u32 timeout = 0xFFFF; ++ while (FIFO_RD_REMAIN(DRV_Reg16(NFI_FIFOSTA_REG16)) < u2Size) { ++ timeout--; ++ if (0 == timeout) ++ return false; ++ } ++ return true; ++} ++ ++static bool ++mtk_nand_WFIFOValidSize(u16 u2Size) ++{ ++ u32 timeout = 0xFFFF; ++ ++ while (FIFO_WR_REMAIN(DRV_Reg16(NFI_FIFOSTA_REG16)) > u2Size) { ++ timeout--; ++ if (0 == timeout) ++ return false; ++ } ++ return true; ++} ++ ++static bool ++mtk_nand_status_ready(u32 u4Status) ++{ ++ u32 timeout = 0xFFFF; ++ ++ while ((DRV_Reg32(NFI_STA_REG32) & u4Status) != 0) { ++ timeout--; ++ if (0 == timeout) ++ return false; ++ } ++ return true; ++} ++ ++static bool ++mtk_nand_reset(void) ++{ ++ int timeout = 0xFFFF; ++ if (DRV_Reg16(NFI_MASTERSTA_REG16)) { ++ mb(); ++ DRV_WriteReg16(NFI_CON_REG16, CON_FIFO_FLUSH | CON_NFI_RST); ++ while (DRV_Reg16(NFI_MASTERSTA_REG16)) { ++ timeout--; ++ if (!timeout) ++ MSG(INIT, "Wait for NFI_MASTERSTA timeout\n"); ++ } ++ } ++ /* issue reset operation */ ++ mb(); ++ DRV_WriteReg16(NFI_CON_REG16, CON_FIFO_FLUSH | CON_NFI_RST); ++ ++ return mtk_nand_status_ready(STA_NFI_FSM_MASK | STA_NAND_BUSY) && mtk_nand_RFIFOValidSize(0) && mtk_nand_WFIFOValidSize(0); ++} ++ ++static void ++mtk_nand_set_mode(u16 u2OpMode) ++{ ++ u16 u2Mode = DRV_Reg16(NFI_CNFG_REG16); ++ u2Mode &= ~CNFG_OP_MODE_MASK; ++ u2Mode |= u2OpMode; ++ DRV_WriteReg16(NFI_CNFG_REG16, u2Mode); ++} ++ ++static void ++mtk_nand_set_autoformat(bool bEnable) ++{ ++ if (bEnable) ++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_AUTO_FMT_EN); ++ else ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AUTO_FMT_EN); ++} ++ ++static void ++mtk_nand_configure_fdm(u16 u2FDMSize) ++{ ++ NFI_CLN_REG16(NFI_PAGEFMT_REG16, PAGEFMT_FDM_MASK | PAGEFMT_FDM_ECC_MASK); ++ NFI_SET_REG16(NFI_PAGEFMT_REG16, u2FDMSize << PAGEFMT_FDM_SHIFT); ++ NFI_SET_REG16(NFI_PAGEFMT_REG16, u2FDMSize << PAGEFMT_FDM_ECC_SHIFT); ++} ++ ++static void ++mtk_nand_configure_lock(void) ++{ ++ u32 u4WriteColNOB = 2; ++ u32 u4WriteRowNOB = 3; ++ u32 u4EraseColNOB = 0; ++ u32 u4EraseRowNOB = 3; ++ DRV_WriteReg16(NFI_LOCKANOB_REG16, ++ (u4WriteColNOB << PROG_CADD_NOB_SHIFT) | (u4WriteRowNOB << PROG_RADD_NOB_SHIFT) | (u4EraseColNOB << ERASE_CADD_NOB_SHIFT) | (u4EraseRowNOB << ERASE_RADD_NOB_SHIFT)); ++ ++ if (CHIPVER_ECO_1 == g_u4ChipVer) { ++ int i; ++ for (i = 0; i < 16; ++i) { ++ DRV_WriteReg32(NFI_LOCK00ADD_REG32 + (i << 1), 0xFFFFFFFF); ++ DRV_WriteReg32(NFI_LOCK00FMT_REG32 + (i << 1), 0xFFFFFFFF); ++ } ++ //DRV_WriteReg16(NFI_LOCKANOB_REG16, 0x0); ++ DRV_WriteReg32(NFI_LOCKCON_REG32, 0xFFFFFFFF); ++ DRV_WriteReg16(NFI_LOCK_REG16, NFI_LOCK_ON); ++ } ++} ++ ++static bool ++mtk_nand_pio_ready(void) ++{ ++ int count = 0; ++ while (!(DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1)) { ++ count++; ++ if (count > 0xffff) { ++ printk("PIO_DIRDY timeout\n"); ++ return false; ++ } ++ } ++ ++ return true; ++} ++ ++static bool ++mtk_nand_set_command(u16 command) ++{ ++ mb(); ++ DRV_WriteReg16(NFI_CMD_REG16, command); ++ return mtk_nand_status_ready(STA_CMD_STATE); ++} ++ ++static bool ++mtk_nand_set_address(u32 u4ColAddr, u32 u4RowAddr, u16 u2ColNOB, u16 u2RowNOB) ++{ ++ mb(); ++ DRV_WriteReg32(NFI_COLADDR_REG32, u4ColAddr); ++ DRV_WriteReg32(NFI_ROWADDR_REG32, u4RowAddr); ++ DRV_WriteReg16(NFI_ADDRNOB_REG16, u2ColNOB | (u2RowNOB << ADDR_ROW_NOB_SHIFT)); ++ return mtk_nand_status_ready(STA_ADDR_STATE); ++} ++ ++static bool ++mtk_nand_check_RW_count(u16 u2WriteSize) ++{ ++ u32 timeout = 0xFFFF; ++ u16 u2SecNum = u2WriteSize >> 9; ++ ++ while (ADDRCNTR_CNTR(DRV_Reg16(NFI_ADDRCNTR_REG16)) < u2SecNum) { ++ timeout--; ++ if (0 == timeout) { ++ printk(KERN_INFO "[%s] timeout\n", __FUNCTION__); ++ return false; ++ } ++ } ++ return true; ++} ++ ++static bool ++mtk_nand_ready_for_read(struct nand_chip *nand, u32 u4RowAddr, u32 u4ColAddr, bool full, u8 * buf) ++{ ++ /* Reset NFI HW internal state machine and flush NFI in/out FIFO */ ++ bool bRet = false; ++ u16 sec_num = 1 << (nand->page_shift - 9); ++ u32 col_addr = u4ColAddr; ++ u32 colnob = 2, rownob = devinfo.addr_cycle - 2; ++ if (nand->options & NAND_BUSWIDTH_16) ++ col_addr /= 2; ++ ++ if (!mtk_nand_reset()) ++ goto cleanup; ++ if (g_bHwEcc) { ++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ } else { ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ } ++ ++ mtk_nand_set_mode(CNFG_OP_READ); ++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN); ++ DRV_WriteReg16(NFI_CON_REG16, sec_num << CON_NFI_SEC_SHIFT); ++ ++ if (full) { ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB); ++ ++ if (g_bHwEcc) ++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ else ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ } else { ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB); ++ } ++ ++ mtk_nand_set_autoformat(full); ++ if (full) ++ if (g_bHwEcc) ++ ECC_Decode_Start(); ++ if (!mtk_nand_set_command(NAND_CMD_READ0)) ++ goto cleanup; ++ if (!mtk_nand_set_address(col_addr, u4RowAddr, colnob, rownob)) ++ goto cleanup; ++ if (!mtk_nand_set_command(NAND_CMD_READSTART)) ++ goto cleanup; ++ if (!mtk_nand_status_ready(STA_NAND_BUSY)) ++ goto cleanup; ++ ++ bRet = true; ++ ++cleanup: ++ return bRet; ++} ++ ++static bool ++mtk_nand_ready_for_write(struct nand_chip *nand, u32 u4RowAddr, u32 col_addr, bool full, u8 * buf) ++{ ++ bool bRet = false; ++ u32 sec_num = 1 << (nand->page_shift - 9); ++ u32 colnob = 2, rownob = devinfo.addr_cycle - 2; ++ if (nand->options & NAND_BUSWIDTH_16) ++ col_addr /= 2; ++ ++ /* Reset NFI HW internal state machine and flush NFI in/out FIFO */ ++ if (!mtk_nand_reset()) ++ return false; ++ ++ mtk_nand_set_mode(CNFG_OP_PRGM); ++ ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_READ_EN); ++ ++ DRV_WriteReg16(NFI_CON_REG16, sec_num << CON_NFI_SEC_SHIFT); ++ ++ if (full) { ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB); ++ if (g_bHwEcc) ++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ else ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ } else { ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB); ++ } ++ ++ mtk_nand_set_autoformat(full); ++ ++ if (full) ++ if (g_bHwEcc) ++ ECC_Encode_Start(); ++ ++ if (!mtk_nand_set_command(NAND_CMD_SEQIN)) ++ goto cleanup; ++ //1 FIXED ME: For Any Kind of AddrCycle ++ if (!mtk_nand_set_address(col_addr, u4RowAddr, colnob, rownob)) ++ goto cleanup; ++ ++ if (!mtk_nand_status_ready(STA_NAND_BUSY)) ++ goto cleanup; ++ ++ bRet = true; ++ ++cleanup: ++ return bRet; ++} ++ ++static bool ++mtk_nand_check_dececc_done(u32 u4SecNum) ++{ ++ u32 timeout, dec_mask; ++ ++ timeout = 0xffff; ++ dec_mask = (1 << u4SecNum) - 1; ++ while ((dec_mask != DRV_Reg(ECC_DECDONE_REG16)) && timeout > 0) ++ timeout--; ++ if (timeout == 0) { ++ MSG(VERIFY, "ECC_DECDONE: timeout\n"); ++ return false; ++ } ++ return true; ++} ++ ++static bool ++mtk_nand_mcu_read_data(u8 * buf, u32 length) ++{ ++ int timeout = 0xffff; ++ u32 i; ++ u32 *buf32 = (u32 *) buf; ++ if ((u32) buf % 4 || length % 4) ++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW); ++ else ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW); ++ ++ //DRV_WriteReg32(NFI_STRADDR_REG32, 0); ++ mb(); ++ NFI_SET_REG16(NFI_CON_REG16, CON_NFI_BRD); ++ ++ if ((u32) buf % 4 || length % 4) { ++ for (i = 0; (i < (length)) && (timeout > 0);) { ++ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) { ++ *buf++ = (u8) DRV_Reg32(NFI_DATAR_REG32); ++ i++; ++ } else { ++ timeout--; ++ } ++ if (0 == timeout) { ++ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__); ++ dump_nfi(); ++ return false; ++ } ++ } ++ } else { ++ for (i = 0; (i < (length >> 2)) && (timeout > 0);) { ++ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) { ++ *buf32++ = DRV_Reg32(NFI_DATAR_REG32); ++ i++; ++ } else { ++ timeout--; ++ } ++ if (0 == timeout) { ++ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__); ++ dump_nfi(); ++ return false; ++ } ++ } ++ } ++ return true; ++} ++ ++static bool ++mtk_nand_read_page_data(struct mtd_info *mtd, u8 * pDataBuf, u32 u4Size) ++{ ++ return mtk_nand_mcu_read_data(pDataBuf, u4Size); ++} ++ ++static bool ++mtk_nand_mcu_write_data(struct mtd_info *mtd, const u8 * buf, u32 length) ++{ ++ u32 timeout = 0xFFFF; ++ u32 i; ++ u32 *pBuf32; ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW); ++ mb(); ++ NFI_SET_REG16(NFI_CON_REG16, CON_NFI_BWR); ++ pBuf32 = (u32 *) buf; ++ ++ if ((u32) buf % 4 || length % 4) ++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW); ++ else ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW); ++ ++ if ((u32) buf % 4 || length % 4) { ++ for (i = 0; (i < (length)) && (timeout > 0);) { ++ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) { ++ DRV_WriteReg32(NFI_DATAW_REG32, *buf++); ++ i++; ++ } else { ++ timeout--; ++ } ++ if (0 == timeout) { ++ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__); ++ dump_nfi(); ++ return false; ++ } ++ } ++ } else { ++ for (i = 0; (i < (length >> 2)) && (timeout > 0);) { ++ if (DRV_Reg16(NFI_PIO_DIRDY_REG16) & 1) { ++ DRV_WriteReg32(NFI_DATAW_REG32, *pBuf32++); ++ i++; ++ } else { ++ timeout--; ++ } ++ if (0 == timeout) { ++ printk(KERN_ERR "[%s] timeout\n", __FUNCTION__); ++ dump_nfi(); ++ return false; ++ } ++ } ++ } ++ ++ return true; ++} ++ ++static bool ++mtk_nand_write_page_data(struct mtd_info *mtd, u8 * buf, u32 size) ++{ ++ return mtk_nand_mcu_write_data(mtd, buf, size); ++} ++ ++static void ++mtk_nand_read_fdm_data(u8 * pDataBuf, u32 u4SecNum) ++{ ++ u32 i; ++ u32 *pBuf32 = (u32 *) pDataBuf; ++ ++ if (pBuf32) { ++ for (i = 0; i < u4SecNum; ++i) { ++ *pBuf32++ = DRV_Reg32(NFI_FDM0L_REG32 + (i << 1)); ++ *pBuf32++ = DRV_Reg32(NFI_FDM0M_REG32 + (i << 1)); ++ } ++ } ++} ++ ++static u8 fdm_buf[64]; ++static void ++mtk_nand_write_fdm_data(struct nand_chip *chip, u8 * pDataBuf, u32 u4SecNum) ++{ ++ u32 i, j; ++ u8 checksum = 0; ++ bool empty = true; ++ struct nand_oobfree *free_entry; ++ u32 *pBuf32; ++ ++ memcpy(fdm_buf, pDataBuf, u4SecNum * 8); ++ ++ free_entry = chip->ecc.layout->oobfree; ++ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES && free_entry[i].length; i++) { ++ for (j = 0; j < free_entry[i].length; j++) { ++ if (pDataBuf[free_entry[i].offset + j] != 0xFF) ++ empty = false; ++ checksum ^= pDataBuf[free_entry[i].offset + j]; ++ } ++ } ++ ++ if (!empty) { ++ fdm_buf[free_entry[i - 1].offset + free_entry[i - 1].length] = checksum; ++ } ++ ++ pBuf32 = (u32 *) fdm_buf; ++ for (i = 0; i < u4SecNum; ++i) { ++ DRV_WriteReg32(NFI_FDM0L_REG32 + (i << 1), *pBuf32++); ++ DRV_WriteReg32(NFI_FDM0M_REG32 + (i << 1), *pBuf32++); ++ } ++} ++ ++static void ++mtk_nand_stop_read(void) ++{ ++ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BRD); ++ mtk_nand_reset(); ++ if (g_bHwEcc) ++ ECC_Decode_End(); ++ DRV_WriteReg16(NFI_INTR_EN_REG16, 0); ++} ++ ++static void ++mtk_nand_stop_write(void) ++{ ++ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BWR); ++ if (g_bHwEcc) ++ ECC_Encode_End(); ++ DRV_WriteReg16(NFI_INTR_EN_REG16, 0); ++} ++ ++bool ++mtk_nand_exec_read_page(struct mtd_info *mtd, u32 u4RowAddr, u32 u4PageSize, u8 * pPageBuf, u8 * pFDMBuf) ++{ ++ u8 *buf; ++ bool bRet = true; ++ struct nand_chip *nand = mtd->priv; ++ u32 u4SecNum = u4PageSize >> 9; ++ ++ if (((u32) pPageBuf % 16) && local_buffer_16_align) ++ buf = local_buffer_16_align; ++ else ++ buf = pPageBuf; ++ if (mtk_nand_ready_for_read(nand, u4RowAddr, 0, true, buf)) { ++ int j; ++ for (j = 0 ; j < u4SecNum; j++) { ++ if (!mtk_nand_read_page_data(mtd, buf+j*512, 512)) ++ bRet = false; ++ if(g_bHwEcc && !mtk_nand_check_dececc_done(j+1)) ++ bRet = false; ++ if(g_bHwEcc && !mtk_nand_check_bch_error(mtd, buf+j*512, j, u4RowAddr)) ++ bRet = false; ++ } ++ if (!mtk_nand_status_ready(STA_NAND_BUSY)) ++ bRet = false; ++ ++ mtk_nand_read_fdm_data(pFDMBuf, u4SecNum); ++ mtk_nand_stop_read(); ++ } ++ ++ if (buf == local_buffer_16_align) ++ memcpy(pPageBuf, buf, u4PageSize); ++ ++ return bRet; ++} ++ ++int ++mtk_nand_exec_write_page(struct mtd_info *mtd, u32 u4RowAddr, u32 u4PageSize, u8 * pPageBuf, u8 * pFDMBuf) ++{ ++ struct nand_chip *chip = mtd->priv; ++ u32 u4SecNum = u4PageSize >> 9; ++ u8 *buf; ++ u8 status; ++ ++ MSG(WRITE, "mtk_nand_exec_write_page, page: 0x%x\n", u4RowAddr); ++ ++ if (((u32) pPageBuf % 16) && local_buffer_16_align) { ++ printk(KERN_INFO "Data buffer not 16 bytes aligned: %p\n", pPageBuf); ++ memcpy(local_buffer_16_align, pPageBuf, mtd->writesize); ++ buf = local_buffer_16_align; ++ } else ++ buf = pPageBuf; ++ ++ if (mtk_nand_ready_for_write(chip, u4RowAddr, 0, true, buf)) { ++ mtk_nand_write_fdm_data(chip, pFDMBuf, u4SecNum); ++ (void)mtk_nand_write_page_data(mtd, buf, u4PageSize); ++ (void)mtk_nand_check_RW_count(u4PageSize); ++ mtk_nand_stop_write(); ++ (void)mtk_nand_set_command(NAND_CMD_PAGEPROG); ++ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY) ; ++ } ++ ++ status = chip->waitfunc(mtd, chip); ++ if (status & NAND_STATUS_FAIL) ++ return -EIO; ++ return 0; ++} ++ ++static int ++get_start_end_block(struct mtd_info *mtd, int block, int *start_blk, int *end_blk) ++{ ++ struct nand_chip *chip = mtd->priv; ++ int i; ++ ++ *start_blk = 0; ++ for (i = 0; i <= part_num; i++) ++ { ++ if (i == part_num) ++ { ++ // try the last reset partition ++ *end_blk = (chip->chipsize >> chip->phys_erase_shift) - 1; ++ if (*start_blk <= *end_blk) ++ { ++ if ((block >= *start_blk) && (block <= *end_blk)) ++ break; ++ } ++ } ++ // skip All partition entry ++ else if (g_pasStatic_Partition[i].size == MTDPART_SIZ_FULL) ++ { ++ continue; ++ } ++ *end_blk = *start_blk + (g_pasStatic_Partition[i].size >> chip->phys_erase_shift) - 1; ++ if ((block >= *start_blk) && (block <= *end_blk)) ++ break; ++ *start_blk = *end_blk + 1; ++ } ++ if (*start_blk > *end_blk) ++ { ++ return -1; ++ } ++ return 0; ++} ++ ++static int ++block_remap(struct mtd_info *mtd, int block) ++{ ++ struct nand_chip *chip = mtd->priv; ++ int start_blk, end_blk; ++ int j, block_offset; ++ int bad_block = 0; ++ ++ if (chip->bbt == NULL) { ++ printk("ERROR!! no bbt table for block_remap\n"); ++ return -1; ++ } ++ ++ if (get_start_end_block(mtd, block, &start_blk, &end_blk) < 0) { ++ printk("ERROR!! can not find start_blk and end_blk\n"); ++ return -1; ++ } ++ ++ block_offset = block - start_blk; ++ for (j = start_blk; j <= end_blk;j++) { ++ if (((chip->bbt[j >> 2] >> ((j<<1) & 0x6)) & 0x3) == 0x0) { ++ if (!block_offset) ++ break; ++ block_offset--; ++ } else { ++ bad_block++; ++ } ++ } ++ if (j <= end_blk) { ++ return j; ++ } else { ++ // remap to the bad block ++ for (j = end_blk; bad_block > 0; j--) ++ { ++ if (((chip->bbt[j >> 2] >> ((j<<1) & 0x6)) & 0x3) != 0x0) ++ { ++ bad_block--; ++ if (bad_block <= block_offset) ++ return j; ++ } ++ } ++ } ++ ++ printk("Error!! block_remap error\n"); ++ return -1; ++} ++ ++int ++check_block_remap(struct mtd_info *mtd, int block) ++{ ++ if (shift_on_bbt) ++ return block_remap(mtd, block); ++ else ++ return block; ++} ++EXPORT_SYMBOL(check_block_remap); ++ ++ ++static int ++write_next_on_fail(struct mtd_info *mtd, char *write_buf, int page, int * to_blk) ++{ ++ struct nand_chip *chip = mtd->priv; ++ int i, j, to_page = 0, first_page; ++ char *buf, *oob; ++ int start_blk = 0, end_blk; ++ int mapped_block; ++ int page_per_block_bit = chip->phys_erase_shift - chip->page_shift; ++ int block = page >> page_per_block_bit; ++ ++ // find next available block in the same MTD partition ++ mapped_block = block_remap(mtd, block); ++ if (mapped_block == -1) ++ return NAND_STATUS_FAIL; ++ ++ get_start_end_block(mtd, block, &start_blk, &end_blk); ++ ++ buf = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL | GFP_DMA); ++ if (buf == NULL) ++ return -1; ++ ++ oob = buf + mtd->writesize; ++ for ((*to_blk) = block + 1; (*to_blk) <= end_blk ; (*to_blk)++) { ++ if (nand_bbt_get(mtd, (*to_blk) << page_per_block_bit) == 0) { ++ int status; ++ status = mtk_nand_erase_hw(mtd, (*to_blk) << page_per_block_bit); ++ if (status & NAND_STATUS_FAIL) { ++ mtk_nand_block_markbad_hw(mtd, (*to_blk) << chip->phys_erase_shift); ++ nand_bbt_set(mtd, (*to_blk) << page_per_block_bit, 0x3); ++ } else { ++ /* good block */ ++ to_page = (*to_blk) << page_per_block_bit; ++ break; ++ } ++ } ++ } ++ ++ if (!to_page) { ++ kfree(buf); ++ return -1; ++ } ++ ++ first_page = (page >> page_per_block_bit) << page_per_block_bit; ++ for (i = 0; i < (1 << page_per_block_bit); i++) { ++ if ((first_page + i) != page) { ++ mtk_nand_read_oob_hw(mtd, chip, (first_page+i)); ++ for (j = 0; j < mtd->oobsize; j++) ++ if (chip->oob_poi[j] != (unsigned char)0xff) ++ break; ++ if (j < mtd->oobsize) { ++ mtk_nand_exec_read_page(mtd, (first_page+i), mtd->writesize, buf, oob); ++ memset(oob, 0xff, mtd->oobsize); ++ if (mtk_nand_exec_write_page(mtd, to_page + i, mtd->writesize, (u8 *)buf, oob) != 0) { ++ int ret, new_blk = 0; ++ nand_bbt_set(mtd, to_page, 0x3); ++ ret = write_next_on_fail(mtd, buf, to_page + i, &new_blk); ++ if (ret) { ++ kfree(buf); ++ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift); ++ return ret; ++ } ++ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift); ++ *to_blk = new_blk; ++ to_page = ((*to_blk) << page_per_block_bit); ++ } ++ } ++ } else { ++ memset(chip->oob_poi, 0xff, mtd->oobsize); ++ if (mtk_nand_exec_write_page(mtd, to_page + i, mtd->writesize, (u8 *)write_buf, chip->oob_poi) != 0) { ++ int ret, new_blk = 0; ++ nand_bbt_set(mtd, to_page, 0x3); ++ ret = write_next_on_fail(mtd, write_buf, to_page + i, &new_blk); ++ if (ret) { ++ kfree(buf); ++ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift); ++ return ret; ++ } ++ mtk_nand_block_markbad_hw(mtd, to_page << chip->page_shift); ++ *to_blk = new_blk; ++ to_page = ((*to_blk) << page_per_block_bit); ++ } ++ } ++ } ++ ++ kfree(buf); ++ ++ return 0; ++} ++ ++static int ++mtk_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, uint32_t offset, ++ int data_len, const u8 * buf, int oob_required, int page, int cached, int raw) ++{ ++ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift); ++ int block = page / page_per_block; ++ u16 page_in_block = page % page_per_block; ++ int mapped_block = block; ++ ++#if defined(MTK_NAND_BMT) ++ mapped_block = get_mapping_block_index(block); ++ // write bad index into oob ++ if (mapped_block != block) ++ set_bad_index_to_oob(chip->oob_poi, block); ++ else ++ set_bad_index_to_oob(chip->oob_poi, FAKE_INDEX); ++#else ++ if (shift_on_bbt) { ++ mapped_block = block_remap(mtd, block); ++ if (mapped_block == -1) ++ return NAND_STATUS_FAIL; ++ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0) ++ return NAND_STATUS_FAIL; ++ } ++#endif ++ do { ++ if (mtk_nand_exec_write_page(mtd, page_in_block + mapped_block * page_per_block, mtd->writesize, (u8 *)buf, chip->oob_poi)) { ++ MSG(INIT, "write fail at block: 0x%x, page: 0x%x\n", mapped_block, page_in_block); ++#if defined(MTK_NAND_BMT) ++ if (update_bmt((page_in_block + mapped_block * page_per_block) << chip->page_shift, UPDATE_WRITE_FAIL, (u8 *) buf, chip->oob_poi)) { ++ MSG(INIT, "Update BMT success\n"); ++ return 0; ++ } else { ++ MSG(INIT, "Update BMT fail\n"); ++ return -EIO; ++ } ++#else ++ { ++ int new_blk; ++ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3); ++ if (write_next_on_fail(mtd, (char *)buf, page_in_block + mapped_block * page_per_block, &new_blk) != 0) ++ { ++ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift); ++ return NAND_STATUS_FAIL; ++ } ++ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift); ++ break; ++ } ++#endif ++ } else ++ break; ++ } while(1); ++ ++ return 0; ++} ++ ++static void ++mtk_nand_command_bp(struct mtd_info *mtd, unsigned int command, int column, int page_addr) ++{ ++ struct nand_chip *nand = mtd->priv; ++ ++ switch (command) { ++ case NAND_CMD_SEQIN: ++ memset(g_kCMD.au1OOB, 0xFF, sizeof(g_kCMD.au1OOB)); ++ g_kCMD.pDataBuf = NULL; ++ g_kCMD.u4RowAddr = page_addr; ++ g_kCMD.u4ColAddr = column; ++ break; ++ ++ case NAND_CMD_PAGEPROG: ++ if (g_kCMD.pDataBuf || (0xFF != g_kCMD.au1OOB[nand_badblock_offset])) { ++ u8 *pDataBuf = g_kCMD.pDataBuf ? g_kCMD.pDataBuf : nand->buffers->databuf; ++ mtk_nand_exec_write_page(mtd, g_kCMD.u4RowAddr, mtd->writesize, pDataBuf, g_kCMD.au1OOB); ++ g_kCMD.u4RowAddr = (u32) - 1; ++ g_kCMD.u4OOBRowAddr = (u32) - 1; ++ } ++ break; ++ ++ case NAND_CMD_READOOB: ++ g_kCMD.u4RowAddr = page_addr; ++ g_kCMD.u4ColAddr = column + mtd->writesize; ++ break; ++ ++ case NAND_CMD_READ0: ++ g_kCMD.u4RowAddr = page_addr; ++ g_kCMD.u4ColAddr = column; ++ break; ++ ++ case NAND_CMD_ERASE1: ++ nand->state=FL_ERASING; ++ (void)mtk_nand_reset(); ++ mtk_nand_set_mode(CNFG_OP_ERASE); ++ (void)mtk_nand_set_command(NAND_CMD_ERASE1); ++ (void)mtk_nand_set_address(0, page_addr, 0, devinfo.addr_cycle - 2); ++ break; ++ ++ case NAND_CMD_ERASE2: ++ (void)mtk_nand_set_command(NAND_CMD_ERASE2); ++ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY) ++ ; ++ break; ++ ++ case NAND_CMD_STATUS: ++ (void)mtk_nand_reset(); ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_BYTE_RW); ++ mtk_nand_set_mode(CNFG_OP_SRD); ++ mtk_nand_set_mode(CNFG_READ_EN); ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB); ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ (void)mtk_nand_set_command(NAND_CMD_STATUS); ++ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_NOB_MASK); ++ mb(); ++ DRV_WriteReg16(NFI_CON_REG16, CON_NFI_SRD | (1 << CON_NFI_NOB_SHIFT)); ++ g_bcmdstatus = true; ++ break; ++ ++ case NAND_CMD_RESET: ++ (void)mtk_nand_reset(); ++ DRV_WriteReg16(NFI_INTR_EN_REG16, INTR_RST_DONE_EN); ++ (void)mtk_nand_set_command(NAND_CMD_RESET); ++ DRV_WriteReg16(NFI_BASE+0x44, 0xF1); ++ while(!(DRV_Reg16(NFI_INTR_REG16)&INTR_RST_DONE_EN)) ++ ; ++ break; ++ ++ case NAND_CMD_READID: ++ mtk_nand_reset(); ++ /* Disable HW ECC */ ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB); ++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN | CNFG_BYTE_RW); ++ (void)mtk_nand_reset(); ++ mb(); ++ mtk_nand_set_mode(CNFG_OP_SRD); ++ (void)mtk_nand_set_command(NAND_CMD_READID); ++ (void)mtk_nand_set_address(0, 0, 1, 0); ++ DRV_WriteReg16(NFI_CON_REG16, CON_NFI_SRD); ++ while (DRV_Reg32(NFI_STA_REG32) & STA_DATAR_STATE) ++ ; ++ break; ++ ++ default: ++ BUG(); ++ break; ++ } ++} ++ ++static void ++mtk_nand_select_chip(struct mtd_info *mtd, int chip) ++{ ++ if ((chip == -1) && (false == g_bInitDone)) { ++ struct nand_chip *nand = mtd->priv; ++ struct mtk_nand_host *host = nand->priv; ++ struct mtk_nand_host_hw *hw = host->hw; ++ u32 spare_per_sector = mtd->oobsize / (mtd->writesize / 512); ++ u32 ecc_bit = 4; ++ u32 spare_bit = PAGEFMT_SPARE_16; ++ ++ if (spare_per_sector >= 28) { ++ spare_bit = PAGEFMT_SPARE_28; ++ ecc_bit = 12; ++ spare_per_sector = 28; ++ } else if (spare_per_sector >= 27) { ++ spare_bit = PAGEFMT_SPARE_27; ++ ecc_bit = 8; ++ spare_per_sector = 27; ++ } else if (spare_per_sector >= 26) { ++ spare_bit = PAGEFMT_SPARE_26; ++ ecc_bit = 8; ++ spare_per_sector = 26; ++ } else if (spare_per_sector >= 16) { ++ spare_bit = PAGEFMT_SPARE_16; ++ ecc_bit = 4; ++ spare_per_sector = 16; ++ } else { ++ MSG(INIT, "[NAND]: NFI not support oobsize: %x\n", spare_per_sector); ++ ASSERT(0); ++ } ++ mtd->oobsize = spare_per_sector*(mtd->writesize/512); ++ MSG(INIT, "[NAND]select ecc bit:%d, sparesize :%d spare_per_sector=%d\n",ecc_bit,mtd->oobsize,spare_per_sector); ++ /* Setup PageFormat */ ++ if (4096 == mtd->writesize) { ++ NFI_SET_REG16(NFI_PAGEFMT_REG16, (spare_bit << PAGEFMT_SPARE_SHIFT) | PAGEFMT_4K); ++ nand->cmdfunc = mtk_nand_command_bp; ++ } else if (2048 == mtd->writesize) { ++ NFI_SET_REG16(NFI_PAGEFMT_REG16, (spare_bit << PAGEFMT_SPARE_SHIFT) | PAGEFMT_2K); ++ nand->cmdfunc = mtk_nand_command_bp; ++ } ++ ECC_Config(hw,ecc_bit); ++ g_bInitDone = true; ++ } ++ switch (chip) { ++ case -1: ++ break; ++ case 0: ++ case 1: ++ /* Jun Shen, 2011.04.13 */ ++ /* Note: MT6577 EVB NAND is mounted on CS0, but FPGA is CS1 */ ++ DRV_WriteReg16(NFI_CSEL_REG16, chip); ++ /* Jun Shen, 2011.04.13 */ ++ break; ++ } ++} ++ ++static uint8_t ++mtk_nand_read_byte(struct mtd_info *mtd) ++{ ++ uint8_t retval = 0; ++ ++ if (!mtk_nand_pio_ready()) { ++ printk("pio ready timeout\n"); ++ retval = false; ++ } ++ ++ if (g_bcmdstatus) { ++ retval = DRV_Reg8(NFI_DATAR_REG32); ++ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_NOB_MASK); ++ mtk_nand_reset(); ++ if (g_bHwEcc) { ++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ } else { ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ } ++ g_bcmdstatus = false; ++ } else ++ retval = DRV_Reg8(NFI_DATAR_REG32); ++ ++ return retval; ++} ++ ++static void ++mtk_nand_read_buf(struct mtd_info *mtd, uint8_t * buf, int len) ++{ ++ struct nand_chip *nand = (struct nand_chip *)mtd->priv; ++ struct NAND_CMD *pkCMD = &g_kCMD; ++ u32 u4ColAddr = pkCMD->u4ColAddr; ++ u32 u4PageSize = mtd->writesize; ++ ++ if (u4ColAddr < u4PageSize) { ++ if ((u4ColAddr == 0) && (len >= u4PageSize)) { ++ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, buf, pkCMD->au1OOB); ++ if (len > u4PageSize) { ++ u32 u4Size = min(len - u4PageSize, sizeof(pkCMD->au1OOB)); ++ memcpy(buf + u4PageSize, pkCMD->au1OOB, u4Size); ++ } ++ } else { ++ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, nand->buffers->databuf, pkCMD->au1OOB); ++ memcpy(buf, nand->buffers->databuf + u4ColAddr, len); ++ } ++ pkCMD->u4OOBRowAddr = pkCMD->u4RowAddr; ++ } else { ++ u32 u4Offset = u4ColAddr - u4PageSize; ++ u32 u4Size = min(len - u4Offset, sizeof(pkCMD->au1OOB)); ++ if (pkCMD->u4OOBRowAddr != pkCMD->u4RowAddr) { ++ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, nand->buffers->databuf, pkCMD->au1OOB); ++ pkCMD->u4OOBRowAddr = pkCMD->u4RowAddr; ++ } ++ memcpy(buf, pkCMD->au1OOB + u4Offset, u4Size); ++ } ++ pkCMD->u4ColAddr += len; ++} ++ ++static void ++mtk_nand_write_buf(struct mtd_info *mtd, const uint8_t * buf, int len) ++{ ++ struct NAND_CMD *pkCMD = &g_kCMD; ++ u32 u4ColAddr = pkCMD->u4ColAddr; ++ u32 u4PageSize = mtd->writesize; ++ int i4Size, i; ++ ++ if (u4ColAddr >= u4PageSize) { ++ u32 u4Offset = u4ColAddr - u4PageSize; ++ u8 *pOOB = pkCMD->au1OOB + u4Offset; ++ i4Size = min(len, (int)(sizeof(pkCMD->au1OOB) - u4Offset)); ++ for (i = 0; i < i4Size; i++) { ++ pOOB[i] &= buf[i]; ++ } ++ } else { ++ pkCMD->pDataBuf = (u8 *) buf; ++ } ++ ++ pkCMD->u4ColAddr += len; ++} ++ ++static int ++mtk_nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t * buf, int oob_required) ++{ ++ mtk_nand_write_buf(mtd, buf, mtd->writesize); ++ mtk_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize); ++ return 0; ++} ++ ++static int ++mtk_nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t * buf, int oob_required, int page) ++{ ++ struct NAND_CMD *pkCMD = &g_kCMD; ++ u32 u4ColAddr = pkCMD->u4ColAddr; ++ u32 u4PageSize = mtd->writesize; ++ ++ if (u4ColAddr == 0) { ++ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, buf, chip->oob_poi); ++ pkCMD->u4ColAddr += u4PageSize + mtd->oobsize; ++ } ++ ++ return 0; ++} ++ ++static int ++mtk_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, u8 * buf, int page) ++{ ++ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift); ++ int block = page / page_per_block; ++ u16 page_in_block = page % page_per_block; ++ int mapped_block = block; ++ ++#if defined (MTK_NAND_BMT) ++ mapped_block = get_mapping_block_index(block); ++ if (mtk_nand_exec_read_page(mtd, page_in_block + mapped_block * page_per_block, ++ mtd->writesize, buf, chip->oob_poi)) ++ return 0; ++#else ++ if (shift_on_bbt) { ++ mapped_block = block_remap(mtd, block); ++ if (mapped_block == -1) ++ return NAND_STATUS_FAIL; ++ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0) ++ return NAND_STATUS_FAIL; ++ } ++ ++ if (mtk_nand_exec_read_page(mtd, page_in_block + mapped_block * page_per_block, mtd->writesize, buf, chip->oob_poi)) ++ return 0; ++ else ++ return -EIO; ++#endif ++} ++ ++int ++mtk_nand_erase_hw(struct mtd_info *mtd, int page) ++{ ++ struct nand_chip *chip = (struct nand_chip *)mtd->priv; ++ ++ chip->erase_cmd(mtd, page); ++ ++ return chip->waitfunc(mtd, chip); ++} ++ ++static int ++mtk_nand_erase(struct mtd_info *mtd, int page) ++{ ++ // get mapping ++ struct nand_chip *chip = mtd->priv; ++ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift); ++ int page_in_block = page % page_per_block; ++ int block = page / page_per_block; ++ int mapped_block = block; ++ ++#if defined(MTK_NAND_BMT) ++ mapped_block = get_mapping_block_index(block); ++#else ++ if (shift_on_bbt) { ++ mapped_block = block_remap(mtd, block); ++ if (mapped_block == -1) ++ return NAND_STATUS_FAIL; ++ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0) ++ return NAND_STATUS_FAIL; ++ } ++#endif ++ ++ do { ++ int status = mtk_nand_erase_hw(mtd, page_in_block + page_per_block * mapped_block); ++ ++ if (status & NAND_STATUS_FAIL) { ++#if defined (MTK_NAND_BMT) ++ if (update_bmt( (page_in_block + mapped_block * page_per_block) << chip->page_shift, ++ UPDATE_ERASE_FAIL, NULL, NULL)) ++ { ++ MSG(INIT, "Erase fail at block: 0x%x, update BMT success\n", mapped_block); ++ return 0; ++ } else { ++ MSG(INIT, "Erase fail at block: 0x%x, update BMT fail\n", mapped_block); ++ return NAND_STATUS_FAIL; ++ } ++#else ++ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift); ++ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3); ++ if (shift_on_bbt) { ++ mapped_block = block_remap(mtd, block); ++ if (mapped_block == -1) ++ return NAND_STATUS_FAIL; ++ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0) ++ return NAND_STATUS_FAIL; ++ } else ++ return NAND_STATUS_FAIL; ++#endif ++ } else ++ break; ++ } while(1); ++ ++ return 0; ++} ++ ++static int ++mtk_nand_read_oob_raw(struct mtd_info *mtd, uint8_t * buf, int page_addr, int len) ++{ ++ struct nand_chip *chip = (struct nand_chip *)mtd->priv; ++ u32 col_addr = 0; ++ u32 sector = 0; ++ int res = 0; ++ u32 colnob = 2, rawnob = devinfo.addr_cycle - 2; ++ int randomread = 0; ++ int read_len = 0; ++ int sec_num = 1<<(chip->page_shift-9); ++ int spare_per_sector = mtd->oobsize/sec_num; ++ ++ if (len > NAND_MAX_OOBSIZE || len % OOB_AVAI_PER_SECTOR || !buf) { ++ printk(KERN_WARNING "[%s] invalid parameter, len: %d, buf: %p\n", __FUNCTION__, len, buf); ++ return -EINVAL; ++ } ++ if (len > spare_per_sector) ++ randomread = 1; ++ if (!randomread || !(devinfo.advancedmode & RAMDOM_READ)) { ++ while (len > 0) { ++ read_len = min(len, spare_per_sector); ++ col_addr = NAND_SECTOR_SIZE + sector * (NAND_SECTOR_SIZE + spare_per_sector); // TODO: Fix this hard-code 16 ++ if (!mtk_nand_ready_for_read(chip, page_addr, col_addr, false, NULL)) { ++ printk(KERN_WARNING "mtk_nand_ready_for_read return failed\n"); ++ res = -EIO; ++ goto error; ++ } ++ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) { ++ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed\n"); ++ res = -EIO; ++ goto error; ++ } ++ mtk_nand_check_RW_count(read_len); ++ mtk_nand_stop_read(); ++ sector++; ++ len -= read_len; ++ } ++ } else { ++ col_addr = NAND_SECTOR_SIZE; ++ if (chip->options & NAND_BUSWIDTH_16) ++ col_addr /= 2; ++ if (!mtk_nand_reset()) ++ goto error; ++ mtk_nand_set_mode(0x6000); ++ NFI_SET_REG16(NFI_CNFG_REG16, CNFG_READ_EN); ++ DRV_WriteReg16(NFI_CON_REG16, 4 << CON_NFI_SEC_SHIFT); ++ ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_AHB); ++ NFI_CLN_REG16(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ ++ mtk_nand_set_autoformat(false); ++ ++ if (!mtk_nand_set_command(NAND_CMD_READ0)) ++ goto error; ++ //1 FIXED ME: For Any Kind of AddrCycle ++ if (!mtk_nand_set_address(col_addr, page_addr, colnob, rawnob)) ++ goto error; ++ if (!mtk_nand_set_command(NAND_CMD_READSTART)) ++ goto error; ++ if (!mtk_nand_status_ready(STA_NAND_BUSY)) ++ goto error; ++ read_len = min(len, spare_per_sector); ++ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) { ++ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed first 16\n"); ++ res = -EIO; ++ goto error; ++ } ++ sector++; ++ len -= read_len; ++ mtk_nand_stop_read(); ++ while (len > 0) { ++ read_len = min(len, spare_per_sector); ++ if (!mtk_nand_set_command(0x05)) ++ goto error; ++ col_addr = NAND_SECTOR_SIZE + sector * (NAND_SECTOR_SIZE + spare_per_sector); ++ if (chip->options & NAND_BUSWIDTH_16) ++ col_addr /= 2; ++ DRV_WriteReg32(NFI_COLADDR_REG32, col_addr); ++ DRV_WriteReg16(NFI_ADDRNOB_REG16, 2); ++ DRV_WriteReg16(NFI_CON_REG16, 4 << CON_NFI_SEC_SHIFT); ++ if (!mtk_nand_status_ready(STA_ADDR_STATE)) ++ goto error; ++ if (!mtk_nand_set_command(0xE0)) ++ goto error; ++ if (!mtk_nand_status_ready(STA_NAND_BUSY)) ++ goto error; ++ if (!mtk_nand_mcu_read_data(buf + spare_per_sector * sector, read_len)) { ++ printk(KERN_WARNING "mtk_nand_mcu_read_data return failed first 16\n"); ++ res = -EIO; ++ goto error; ++ } ++ mtk_nand_stop_read(); ++ sector++; ++ len -= read_len; ++ } ++ } ++error: ++ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BRD); ++ return res; ++} ++ ++static int ++mtk_nand_write_oob_raw(struct mtd_info *mtd, const uint8_t * buf, int page_addr, int len) ++{ ++ struct nand_chip *chip = mtd->priv; ++ u32 col_addr = 0; ++ u32 sector = 0; ++ int write_len = 0; ++ int status; ++ int sec_num = 1<<(chip->page_shift-9); ++ int spare_per_sector = mtd->oobsize/sec_num; ++ ++ if (len > NAND_MAX_OOBSIZE || len % OOB_AVAI_PER_SECTOR || !buf) { ++ printk(KERN_WARNING "[%s] invalid parameter, len: %d, buf: %p\n", __FUNCTION__, len, buf); ++ return -EINVAL; ++ } ++ ++ while (len > 0) { ++ write_len = min(len, spare_per_sector); ++ col_addr = sector * (NAND_SECTOR_SIZE + spare_per_sector) + NAND_SECTOR_SIZE; ++ if (!mtk_nand_ready_for_write(chip, page_addr, col_addr, false, NULL)) ++ return -EIO; ++ if (!mtk_nand_mcu_write_data(mtd, buf + sector * spare_per_sector, write_len)) ++ return -EIO; ++ (void)mtk_nand_check_RW_count(write_len); ++ NFI_CLN_REG16(NFI_CON_REG16, CON_NFI_BWR); ++ (void)mtk_nand_set_command(NAND_CMD_PAGEPROG); ++ while (DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY) ++ ; ++ status = chip->waitfunc(mtd, chip); ++ if (status & NAND_STATUS_FAIL) { ++ printk(KERN_INFO "status: %d\n", status); ++ return -EIO; ++ } ++ len -= write_len; ++ sector++; ++ } ++ ++ return 0; ++} ++ ++static int ++mtk_nand_write_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page) ++{ ++ int i, iter; ++ int sec_num = 1<<(chip->page_shift-9); ++ int spare_per_sector = mtd->oobsize/sec_num; ++ ++ memcpy(local_oob_buf, chip->oob_poi, mtd->oobsize); ++ ++ // copy ecc data ++ for (i = 0; i < chip->ecc.layout->eccbytes; i++) { ++ iter = (i / (spare_per_sector-OOB_AVAI_PER_SECTOR)) * spare_per_sector + OOB_AVAI_PER_SECTOR + i % (spare_per_sector-OOB_AVAI_PER_SECTOR); ++ local_oob_buf[iter] = chip->oob_poi[chip->ecc.layout->eccpos[i]]; ++ } ++ ++ // copy FDM data ++ for (i = 0; i < sec_num; i++) ++ memcpy(&local_oob_buf[i * spare_per_sector], &chip->oob_poi[i * OOB_AVAI_PER_SECTOR], OOB_AVAI_PER_SECTOR); ++ ++ return mtk_nand_write_oob_raw(mtd, local_oob_buf, page, mtd->oobsize); ++} ++ ++static int mtk_nand_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) ++{ ++ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift); ++ int block = page / page_per_block; ++ u16 page_in_block = page % page_per_block; ++ int mapped_block = block; ++ ++#if defined(MTK_NAND_BMT) ++ mapped_block = get_mapping_block_index(block); ++ // write bad index into oob ++ if (mapped_block != block) ++ set_bad_index_to_oob(chip->oob_poi, block); ++ else ++ set_bad_index_to_oob(chip->oob_poi, FAKE_INDEX); ++#else ++ if (shift_on_bbt) ++ { ++ mapped_block = block_remap(mtd, block); ++ if (mapped_block == -1) ++ return NAND_STATUS_FAIL; ++ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0) ++ return NAND_STATUS_FAIL; ++ } ++#endif ++ do { ++ if (mtk_nand_write_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block /* page */)) { ++ MSG(INIT, "write oob fail at block: 0x%x, page: 0x%x\n", mapped_block, page_in_block); ++#if defined(MTK_NAND_BMT) ++ if (update_bmt((page_in_block + mapped_block * page_per_block) << chip->page_shift, ++ UPDATE_WRITE_FAIL, NULL, chip->oob_poi)) ++ { ++ MSG(INIT, "Update BMT success\n"); ++ return 0; ++ } else { ++ MSG(INIT, "Update BMT fail\n"); ++ return -EIO; ++ } ++#else ++ mtk_nand_block_markbad_hw(mtd, (page_in_block + mapped_block * page_per_block) << chip->page_shift); ++ nand_bbt_set(mtd, page_in_block + mapped_block * page_per_block, 0x3); ++ if (shift_on_bbt) { ++ mapped_block = block_remap(mtd, mapped_block); ++ if (mapped_block == -1) ++ return NAND_STATUS_FAIL; ++ if (nand_bbt_get(mtd, mapped_block << (chip->phys_erase_shift - chip->page_shift)) != 0x0) ++ return NAND_STATUS_FAIL; ++ } else { ++ return NAND_STATUS_FAIL; ++ } ++#endif ++ } else ++ break; ++ } while (1); ++ ++ return 0; ++} ++ ++int ++mtk_nand_block_markbad_hw(struct mtd_info *mtd, loff_t offset) ++{ ++ struct nand_chip *chip = mtd->priv; ++ int block = (int)offset >> chip->phys_erase_shift; ++ int page = block * (1 << (chip->phys_erase_shift - chip->page_shift)); ++ u8 buf[8]; ++ ++ memset(buf, 0xFF, 8); ++ buf[0] = 0; ++ return mtk_nand_write_oob_raw(mtd, buf, page, 8); ++} ++ ++static int ++mtk_nand_block_markbad(struct mtd_info *mtd, loff_t offset) ++{ ++ struct nand_chip *chip = mtd->priv; ++ int block = (int)offset >> chip->phys_erase_shift; ++ int ret; ++ int mapped_block = block; ++ ++ nand_get_device(chip, mtd, FL_WRITING); ++ ++#if defined(MTK_NAND_BMT) ++ mapped_block = get_mapping_block_index(block); ++ ret = mtk_nand_block_markbad_hw(mtd, mapped_block << chip->phys_erase_shift); ++#else ++ if (shift_on_bbt) { ++ mapped_block = block_remap(mtd, block); ++ if (mapped_block == -1) { ++ printk("NAND mark bad failed\n"); ++ nand_release_device(mtd); ++ return NAND_STATUS_FAIL; ++ } ++ } ++ ret = mtk_nand_block_markbad_hw(mtd, mapped_block << chip->phys_erase_shift); ++#endif ++ nand_release_device(mtd); ++ ++ return ret; ++} ++ ++int ++mtk_nand_read_oob_hw(struct mtd_info *mtd, struct nand_chip *chip, int page) ++{ ++ int i; ++ u8 iter = 0; ++ ++ int sec_num = 1<<(chip->page_shift-9); ++ int spare_per_sector = mtd->oobsize/sec_num; ++ ++ if (mtk_nand_read_oob_raw(mtd, chip->oob_poi, page, mtd->oobsize)) { ++ printk(KERN_ERR "[%s]mtk_nand_read_oob_raw return failed\n", __FUNCTION__); ++ return -EIO; ++ } ++ ++ // adjust to ecc physical layout to memory layout ++ /*********************************************************/ ++ /* FDM0 | ECC0 | FDM1 | ECC1 | FDM2 | ECC2 | FDM3 | ECC3 */ ++ /* 8B | 8B | 8B | 8B | 8B | 8B | 8B | 8B */ ++ /*********************************************************/ ++ ++ memcpy(local_oob_buf, chip->oob_poi, mtd->oobsize); ++ // copy ecc data ++ for (i = 0; i < chip->ecc.layout->eccbytes; i++) { ++ iter = (i / (spare_per_sector-OOB_AVAI_PER_SECTOR)) * spare_per_sector + OOB_AVAI_PER_SECTOR + i % (spare_per_sector-OOB_AVAI_PER_SECTOR); ++ chip->oob_poi[chip->ecc.layout->eccpos[i]] = local_oob_buf[iter]; ++ } ++ ++ // copy FDM data ++ for (i = 0; i < sec_num; i++) { ++ memcpy(&chip->oob_poi[i * OOB_AVAI_PER_SECTOR], &local_oob_buf[i * spare_per_sector], OOB_AVAI_PER_SECTOR); ++ } ++ ++ return 0; ++} ++ ++static int ++mtk_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, int page) ++{ ++ int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift); ++ int block = page / page_per_block; ++ u16 page_in_block = page % page_per_block; ++ int mapped_block = block; ++ ++#if defined (MTK_NAND_BMT) ++ mapped_block = get_mapping_block_index(block); ++ mtk_nand_read_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block); ++#else ++ if (shift_on_bbt) { ++ mapped_block = block_remap(mtd, block); ++ if (mapped_block == -1) ++ return NAND_STATUS_FAIL; ++ // allow to read oob even if the block is bad ++ } ++ if (mtk_nand_read_oob_hw(mtd, chip, page_in_block + mapped_block * page_per_block)!=0) ++ return -1; ++#endif ++ return 0; ++} ++ ++int ++mtk_nand_block_bad_hw(struct mtd_info *mtd, loff_t ofs) ++{ ++ struct nand_chip *chip = (struct nand_chip *)mtd->priv; ++ int page_addr = (int)(ofs >> chip->page_shift); ++ unsigned int page_per_block = 1 << (chip->phys_erase_shift - chip->page_shift); ++ unsigned char oob_buf[8]; ++ ++ page_addr &= ~(page_per_block - 1); ++ if (mtk_nand_read_oob_raw(mtd, oob_buf, page_addr, sizeof(oob_buf))) { ++ printk(KERN_WARNING "mtk_nand_read_oob_raw return error\n"); ++ return 1; ++ } ++ ++ if (oob_buf[0] != 0xff) { ++ printk(KERN_WARNING "Bad block detected at 0x%x, oob_buf[0] is 0x%x\n", page_addr, oob_buf[0]); ++ // dump_nfi(); ++ return 1; ++ } ++ ++ return 0; ++} ++ ++static int ++mtk_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip) ++{ ++ int chipnr = 0; ++ struct nand_chip *chip = (struct nand_chip *)mtd->priv; ++ int block = (int)ofs >> chip->phys_erase_shift; ++ int mapped_block = block; ++ int ret; ++ ++ if (getchip) { ++ chipnr = (int)(ofs >> chip->chip_shift); ++ nand_get_device(chip, mtd, FL_READING); ++ /* Select the NAND device */ ++ chip->select_chip(mtd, chipnr); ++ } ++ ++#if defined(MTK_NAND_BMT) ++ mapped_block = get_mapping_block_index(block); ++#else ++ if (shift_on_bbt) { ++ mapped_block = block_remap(mtd, block); ++ if (mapped_block == -1) { ++ if (getchip) ++ nand_release_device(mtd); ++ return NAND_STATUS_FAIL; ++ } ++ } ++#endif ++ ++ ret = mtk_nand_block_bad_hw(mtd, mapped_block << chip->phys_erase_shift); ++#if defined (MTK_NAND_BMT) ++ if (ret) { ++ MSG(INIT, "Unmapped bad block: 0x%x\n", mapped_block); ++ if (update_bmt(mapped_block << chip->phys_erase_shift, UPDATE_UNMAPPED_BLOCK, NULL, NULL)) { ++ MSG(INIT, "Update BMT success\n"); ++ ret = 0; ++ } else { ++ MSG(INIT, "Update BMT fail\n"); ++ ret = 1; ++ } ++ } ++#endif ++ ++ if (getchip) ++ nand_release_device(mtd); ++ ++ return ret; ++} ++ ++#ifdef CONFIG_MTD_NAND_VERIFY_WRITE ++char gacBuf[4096 + 288]; ++ ++static int ++mtk_nand_verify_buf(struct mtd_info *mtd, const uint8_t * buf, int len) ++{ ++ struct nand_chip *chip = (struct nand_chip *)mtd->priv; ++ struct NAND_CMD *pkCMD = &g_kCMD; ++ u32 u4PageSize = mtd->writesize; ++ u32 *pSrc, *pDst; ++ int i; ++ ++ mtk_nand_exec_read_page(mtd, pkCMD->u4RowAddr, u4PageSize, gacBuf, gacBuf + u4PageSize); ++ ++ pSrc = (u32 *) buf; ++ pDst = (u32 *) gacBuf; ++ len = len / sizeof(u32); ++ for (i = 0; i < len; ++i) { ++ if (*pSrc != *pDst) { ++ MSG(VERIFY, "mtk_nand_verify_buf page fail at page %d\n", pkCMD->u4RowAddr); ++ return -1; ++ } ++ pSrc++; ++ pDst++; ++ } ++ ++ pSrc = (u32 *) chip->oob_poi; ++ pDst = (u32 *) (gacBuf + u4PageSize); ++ ++ if ((pSrc[0] != pDst[0]) || (pSrc[1] != pDst[1]) || (pSrc[2] != pDst[2]) || (pSrc[3] != pDst[3]) || (pSrc[4] != pDst[4]) || (pSrc[5] != pDst[5])) { ++ // TODO: Ask Designer Why? ++ //(pSrc[6] != pDst[6]) || (pSrc[7] != pDst[7])) ++ MSG(VERIFY, "mtk_nand_verify_buf oob fail at page %d\n", pkCMD->u4RowAddr); ++ MSG(VERIFY, "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", pSrc[0], pSrc[1], pSrc[2], pSrc[3], pSrc[4], pSrc[5], pSrc[6], pSrc[7]); ++ MSG(VERIFY, "0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x 0x%x\n", pDst[0], pDst[1], pDst[2], pDst[3], pDst[4], pDst[5], pDst[6], pDst[7]); ++ return -1; ++ } ++ return 0; ++} ++#endif ++ ++static void ++mtk_nand_init_hw(struct mtk_nand_host *host) { ++ struct mtk_nand_host_hw *hw = host->hw; ++ u32 data; ++ ++ data = DRV_Reg32(RALINK_SYSCTL_BASE+0x60); ++ data &= ~((0x3<<18)|(0x3<<16)); ++ data |= ((0x2<<18) |(0x2<<16)); ++ DRV_WriteReg32(RALINK_SYSCTL_BASE+0x60, data); ++ ++ MSG(INIT, "Enable NFI Clock\n"); ++ nand_enable_clock(); ++ ++ g_bInitDone = false; ++ g_kCMD.u4OOBRowAddr = (u32) - 1; ++ ++ /* Set default NFI access timing control */ ++ DRV_WriteReg32(NFI_ACCCON_REG32, hw->nfi_access_timing); ++ DRV_WriteReg16(NFI_CNFG_REG16, 0); ++ DRV_WriteReg16(NFI_PAGEFMT_REG16, 0); ++ ++ /* Reset the state machine and data FIFO, because flushing FIFO */ ++ (void)mtk_nand_reset(); ++ ++ /* Set the ECC engine */ ++ if (hw->nand_ecc_mode == NAND_ECC_HW) { ++ MSG(INIT, "%s : Use HW ECC\n", MODULE_NAME); ++ if (g_bHwEcc) ++ NFI_SET_REG32(NFI_CNFG_REG16, CNFG_HW_ECC_EN); ++ ECC_Config(host->hw,4); ++ mtk_nand_configure_fdm(8); ++ mtk_nand_configure_lock(); ++ } ++ ++ NFI_SET_REG16(NFI_IOCON_REG16, 0x47); ++} ++ ++static int mtk_nand_dev_ready(struct mtd_info *mtd) ++{ ++ return !(DRV_Reg32(NFI_STA_REG32) & STA_NAND_BUSY); ++} ++ ++#define FACT_BBT_BLOCK_NUM 32 // use the latest 32 BLOCK for factory bbt table ++#define FACT_BBT_OOB_SIGNATURE 1 ++#define FACT_BBT_SIGNATURE_LEN 7 ++const u8 oob_signature[] = "mtknand"; ++static u8 *fact_bbt = 0; ++static u32 bbt_size = 0; ++ ++static int ++read_fact_bbt(struct mtd_info *mtd, unsigned int page) ++{ ++ struct nand_chip *chip = mtd->priv; ++ ++ // read oob ++ if (mtk_nand_read_oob_hw(mtd, chip, page)==0) ++ { ++ if (chip->oob_poi[nand_badblock_offset] != 0xFF) ++ { ++ printk("Bad Block on Page %x\n", page); ++ return -1; ++ } ++ if (memcmp(&chip->oob_poi[FACT_BBT_OOB_SIGNATURE], oob_signature, FACT_BBT_SIGNATURE_LEN) != 0) ++ { ++ printk("compare signature failed %x\n", page); ++ return -1; ++ } ++ if (mtk_nand_exec_read_page(mtd, page, mtd->writesize, chip->buffers->databuf, chip->oob_poi)) ++ { ++ printk("Signature matched and data read!\n"); ++ memcpy(fact_bbt, chip->buffers->databuf, (bbt_size <= mtd->writesize)? bbt_size:mtd->writesize); ++ return 0; ++ } ++ ++ } ++ printk("failed at page %x\n", page); ++ return -1; ++} ++ ++static int ++load_fact_bbt(struct mtd_info *mtd) ++{ ++ struct nand_chip *chip = mtd->priv; ++ int i; ++ u32 total_block; ++ ++ total_block = 1 << (chip->chip_shift - chip->phys_erase_shift); ++ bbt_size = total_block >> 2; ++ ++ if ((!fact_bbt) && (bbt_size)) ++ fact_bbt = (u8 *)kmalloc(bbt_size, GFP_KERNEL); ++ if (!fact_bbt) ++ return -1; ++ ++ for (i = total_block - 1; i >= (total_block - FACT_BBT_BLOCK_NUM); i--) ++ { ++ if (read_fact_bbt(mtd, i << (chip->phys_erase_shift - chip->page_shift)) == 0) ++ { ++ printk("load_fact_bbt success %d\n", i); ++ return 0; ++ } ++ ++ } ++ printk("load_fact_bbt failed\n"); ++ return -1; ++} ++ ++static int ++mtk_nand_probe(struct platform_device *pdev) ++{ ++ struct mtd_part_parser_data ppdata; ++ struct mtk_nand_host_hw *hw; ++ struct mtd_info *mtd; ++ struct nand_chip *nand_chip; ++ u8 ext_id1, ext_id2, ext_id3; ++ int err = 0; ++ int id; ++ u32 ext_id; ++ int i; ++ u32 data; ++ ++ data = DRV_Reg32(RALINK_SYSCTL_BASE+0x60); ++ data &= ~((0x3<<18)|(0x3<<16)); ++ data |= ((0x2<<18) |(0x2<<16)); ++ DRV_WriteReg32(RALINK_SYSCTL_BASE+0x60, data); ++ ++ hw = &mt7621_nand_hw, ++ BUG_ON(!hw); ++ /* Allocate memory for the device structure (and zero it) */ ++ host = kzalloc(sizeof(struct mtk_nand_host), GFP_KERNEL); ++ if (!host) { ++ MSG(INIT, "mtk_nand: failed to allocate device structure.\n"); ++ return -ENOMEM; ++ } ++ ++ /* Allocate memory for 16 byte aligned buffer */ ++ local_buffer_16_align = local_buffer + 16 - ((u32) local_buffer % 16); ++ printk(KERN_INFO "Allocate 16 byte aligned buffer: %p\n", local_buffer_16_align); ++ host->hw = hw; ++ ++ /* init mtd data structure */ ++ nand_chip = &host->nand_chip; ++ nand_chip->priv = host; /* link the private data structures */ ++ ++ mtd = &host->mtd; ++ mtd->priv = nand_chip; ++ mtd->owner = THIS_MODULE; ++ mtd->name = "MT7621-NAND"; ++ ++ hw->nand_ecc_mode = NAND_ECC_HW; ++ ++ /* Set address of NAND IO lines */ ++ nand_chip->IO_ADDR_R = (void __iomem *)NFI_DATAR_REG32; ++ nand_chip->IO_ADDR_W = (void __iomem *)NFI_DATAW_REG32; ++ nand_chip->chip_delay = 20; /* 20us command delay time */ ++ nand_chip->ecc.mode = hw->nand_ecc_mode; /* enable ECC */ ++ nand_chip->ecc.strength = 1; ++ nand_chip->read_byte = mtk_nand_read_byte; ++ nand_chip->read_buf = mtk_nand_read_buf; ++ nand_chip->write_buf = mtk_nand_write_buf; ++#ifdef CONFIG_MTD_NAND_VERIFY_WRITE ++ nand_chip->verify_buf = mtk_nand_verify_buf; ++#endif ++ nand_chip->select_chip = mtk_nand_select_chip; ++ nand_chip->dev_ready = mtk_nand_dev_ready; ++ nand_chip->cmdfunc = mtk_nand_command_bp; ++ nand_chip->ecc.read_page = mtk_nand_read_page_hwecc; ++ nand_chip->ecc.write_page = mtk_nand_write_page_hwecc; ++ ++ nand_chip->ecc.layout = &nand_oob_64; ++ nand_chip->ecc.size = hw->nand_ecc_size; //2048 ++ nand_chip->ecc.bytes = hw->nand_ecc_bytes; //32 ++ ++ // For BMT, we need to revise driver architecture ++ nand_chip->write_page = mtk_nand_write_page; ++ nand_chip->ecc.write_oob = mtk_nand_write_oob; ++ nand_chip->block_markbad = mtk_nand_block_markbad; // need to add nand_get_device()/nand_release_device(). ++ // nand_chip->erase = mtk_nand_erase; ++ // nand_chip->read_page = mtk_nand_read_page; ++ nand_chip->ecc.read_oob = mtk_nand_read_oob; ++ nand_chip->block_bad = mtk_nand_block_bad; ++ ++ //Qwert:Add for Uboot ++ mtk_nand_init_hw(host); ++ /* Select the device */ ++ nand_chip->select_chip(mtd, NFI_DEFAULT_CS); ++ ++ /* ++ * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx) ++ * after power-up ++ */ ++ nand_chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1); ++ ++ memset(&devinfo, 0 , sizeof(flashdev_info)); ++ ++ /* Send the command for reading device ID */ ++ ++ nand_chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); ++ ++ /* Read manufacturer and device IDs */ ++ manu_id = nand_chip->read_byte(mtd); ++ dev_id = nand_chip->read_byte(mtd); ++ id = dev_id | (manu_id << 8); ++ ext_id1 = nand_chip->read_byte(mtd); ++ ext_id2 = nand_chip->read_byte(mtd); ++ ext_id3 = nand_chip->read_byte(mtd); ++ ext_id = ext_id1 << 16 | ext_id2 << 8 | ext_id3; ++ if (!get_device_info(id, ext_id, &devinfo)) { ++ u32 chip_mode = RALINK_REG(RALINK_SYSCTL_BASE+0x010)&0x0F; ++ MSG(INIT, "Not Support this Device! \r\n"); ++ memset(&devinfo, 0 , sizeof(flashdev_info)); ++ MSG(INIT, "chip_mode=%08X\n",chip_mode); ++ ++ /* apply bootstrap first */ ++ devinfo.addr_cycle = 5; ++ devinfo.iowidth = 8; ++ ++ switch (chip_mode) { ++ case 10: ++ devinfo.pagesize = 2048; ++ devinfo.sparesize = 128; ++ devinfo.totalsize = 128; ++ devinfo.blocksize = 128; ++ break; ++ case 11: ++ devinfo.pagesize = 4096; ++ devinfo.sparesize = 128; ++ devinfo.totalsize = 1024; ++ devinfo.blocksize = 256; ++ break; ++ case 12: ++ devinfo.pagesize = 4096; ++ devinfo.sparesize = 224; ++ devinfo.totalsize = 2048; ++ devinfo.blocksize = 512; ++ break; ++ default: ++ case 1: ++ devinfo.pagesize = 2048; ++ devinfo.sparesize = 64; ++ devinfo.totalsize = 128; ++ devinfo.blocksize = 128; ++ break; ++ } ++ ++ devinfo.timmingsetting = NFI_DEFAULT_ACCESS_TIMING; ++ devinfo.devciename[0] = 'U'; ++ devinfo.advancedmode = 0; ++ } ++ mtd->writesize = devinfo.pagesize; ++ mtd->erasesize = (devinfo.blocksize<<10); ++ mtd->oobsize = devinfo.sparesize; ++ ++ nand_chip->chipsize = (devinfo.totalsize<<20); ++ nand_chip->page_shift = ffs(mtd->writesize) - 1; ++ nand_chip->pagemask = (nand_chip->chipsize >> nand_chip->page_shift) - 1; ++ nand_chip->phys_erase_shift = ffs(mtd->erasesize) - 1; ++ nand_chip->chip_shift = ffs(nand_chip->chipsize) - 1;//0x1C;//ffs(nand_chip->chipsize) - 1; ++ nand_chip->oob_poi = nand_chip->buffers->databuf + mtd->writesize; ++ nand_chip->badblockpos = 0; ++ ++ if (devinfo.pagesize == 4096) ++ nand_chip->ecc.layout = &nand_oob_128; ++ else if (devinfo.pagesize == 2048) ++ nand_chip->ecc.layout = &nand_oob_64; ++ else if (devinfo.pagesize == 512) ++ nand_chip->ecc.layout = &nand_oob_16; ++ ++ nand_chip->ecc.layout->eccbytes = devinfo.sparesize-OOB_AVAI_PER_SECTOR*(devinfo.pagesize/NAND_SECTOR_SIZE); ++ for (i = 0; i < nand_chip->ecc.layout->eccbytes; i++) ++ nand_chip->ecc.layout->eccpos[i]=OOB_AVAI_PER_SECTOR*(devinfo.pagesize/NAND_SECTOR_SIZE)+i; ++ ++ MSG(INIT, "Support this Device in MTK table! %x \r\n", id); ++ hw->nfi_bus_width = devinfo.iowidth; ++ DRV_WriteReg32(NFI_ACCCON_REG32, devinfo.timmingsetting); ++ ++ /* 16-bit bus width */ ++ if (hw->nfi_bus_width == 16) { ++ MSG(INIT, "%s : Set the 16-bit I/O settings!\n", MODULE_NAME); ++ nand_chip->options |= NAND_BUSWIDTH_16; ++ } ++ mtd->oobsize = devinfo.sparesize; ++ hw->nfi_cs_num = 1; ++ ++ /* Scan to find existance of the device */ ++ if (nand_scan(mtd, hw->nfi_cs_num)) { ++ MSG(INIT, "%s : nand_scan fail.\n", MODULE_NAME); ++ err = -ENXIO; ++ goto out; ++ } ++ ++ g_page_size = mtd->writesize; ++ platform_set_drvdata(pdev, host); ++ if (hw->nfi_bus_width == 16) { ++ NFI_SET_REG16(NFI_PAGEFMT_REG16, PAGEFMT_DBYTE_EN); ++ } ++ ++ nand_chip->select_chip(mtd, 0); ++#if defined(MTK_NAND_BMT) ++ nand_chip->chipsize -= (BMT_POOL_SIZE) << nand_chip->phys_erase_shift; ++#endif ++ mtd->size = nand_chip->chipsize; ++ ++ CFG_BLOCKSIZE = mtd->erasesize; ++ ++#if defined(MTK_NAND_BMT) ++ if (!g_bmt) { ++ if (!(g_bmt = init_bmt(nand_chip, BMT_POOL_SIZE))) { ++ MSG(INIT, "Error: init bmt failed\n"); ++ return 0; ++ } ++ } ++#endif ++ ++ ppdata.of_node = pdev->dev.of_node; ++ err = mtd_device_parse_register(mtd, probe_types, &ppdata, ++ NULL, 0); ++ if (!err) { ++ MSG(INIT, "[mtk_nand] probe successfully!\n"); ++ nand_disable_clock(); ++ shift_on_bbt = 1; ++ if (load_fact_bbt(mtd) == 0) { ++ int i; ++ for (i = 0; i < 0x100; i++) ++ nand_chip->bbt[i] |= fact_bbt[i]; ++ } ++ ++ return err; ++ } ++ ++out: ++ MSG(INIT, "[NFI] mtk_nand_probe fail, err = %d!\n", err); ++ nand_release(mtd); ++ platform_set_drvdata(pdev, NULL); ++ kfree(host); ++ nand_disable_clock(); ++ return err; ++} ++ ++static int ++mtk_nand_remove(struct platform_device *pdev) ++{ ++ struct mtk_nand_host *host = platform_get_drvdata(pdev); ++ struct mtd_info *mtd = &host->mtd; ++ ++ nand_release(mtd); ++ kfree(host); ++ nand_disable_clock(); ++ ++ return 0; ++} ++ ++static const struct of_device_id mt7621_nand_match[] = { ++ { .compatible = "mtk,mt7621-nand" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, mt7621_nand_match); ++ ++static struct platform_driver mtk_nand_driver = { ++ .probe = mtk_nand_probe, ++ .remove = mtk_nand_remove, ++ .driver = { ++ .name = "MT7621-NAND", ++ .owner = THIS_MODULE, ++ .of_match_table = mt7621_nand_match, ++ }, ++}; ++ ++static int __init ++mtk_nand_init(void) ++{ ++ printk("MediaTek Nand driver init, version %s\n", VERSION); ++ ++ return platform_driver_register(&mtk_nand_driver); ++} ++ ++static void __exit ++mtk_nand_exit(void) ++{ ++ platform_driver_unregister(&mtk_nand_driver); ++} ++ ++module_init(mtk_nand_init); ++module_exit(mtk_nand_exit); ++MODULE_LICENSE("GPL"); +diff --git a/drivers/mtd/nand/mtk_nand.h b/drivers/mtd/nand/mtk_nand.h +new file mode 100644 +index 0000000..6db88c4 +--- /dev/null ++++ b/drivers/mtd/nand/mtk_nand.h +@@ -0,0 +1,452 @@ ++#ifndef __MTK_NAND_H ++#define __MTK_NAND_H ++ ++#define RALINK_NAND_CTRL_BASE 0xBE003000 ++#define RALINK_SYSCTL_BASE 0xBE000000 ++#define RALINK_NANDECC_CTRL_BASE 0xBE003800 ++/******************************************************************************* ++ * NFI Register Definition ++ *******************************************************************************/ ++ ++#define NFI_CNFG_REG16 ((volatile P_U16)(NFI_BASE+0x0000)) ++#define NFI_PAGEFMT_REG16 ((volatile P_U16)(NFI_BASE+0x0004)) ++#define NFI_CON_REG16 ((volatile P_U16)(NFI_BASE+0x0008)) ++#define NFI_ACCCON_REG32 ((volatile P_U32)(NFI_BASE+0x000C)) ++#define NFI_INTR_EN_REG16 ((volatile P_U16)(NFI_BASE+0x0010)) ++#define NFI_INTR_REG16 ((volatile P_U16)(NFI_BASE+0x0014)) ++ ++#define NFI_CMD_REG16 ((volatile P_U16)(NFI_BASE+0x0020)) ++ ++#define NFI_ADDRNOB_REG16 ((volatile P_U16)(NFI_BASE+0x0030)) ++#define NFI_COLADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0034)) ++#define NFI_ROWADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0038)) ++ ++#define NFI_STRDATA_REG16 ((volatile P_U16)(NFI_BASE+0x0040)) ++ ++#define NFI_DATAW_REG32 ((volatile P_U32)(NFI_BASE+0x0050)) ++#define NFI_DATAR_REG32 ((volatile P_U32)(NFI_BASE+0x0054)) ++#define NFI_PIO_DIRDY_REG16 ((volatile P_U16)(NFI_BASE+0x0058)) ++ ++#define NFI_STA_REG32 ((volatile P_U32)(NFI_BASE+0x0060)) ++#define NFI_FIFOSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0064)) ++#define NFI_LOCKSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0068)) ++ ++#define NFI_ADDRCNTR_REG16 ((volatile P_U16)(NFI_BASE+0x0070)) ++ ++#define NFI_STRADDR_REG32 ((volatile P_U32)(NFI_BASE+0x0080)) ++#define NFI_BYTELEN_REG16 ((volatile P_U16)(NFI_BASE+0x0084)) ++ ++#define NFI_CSEL_REG16 ((volatile P_U16)(NFI_BASE+0x0090)) ++#define NFI_IOCON_REG16 ((volatile P_U16)(NFI_BASE+0x0094)) ++ ++#define NFI_FDM0L_REG32 ((volatile P_U32)(NFI_BASE+0x00A0)) ++#define NFI_FDM0M_REG32 ((volatile P_U32)(NFI_BASE+0x00A4)) ++ ++#define NFI_LOCK_REG16 ((volatile P_U16)(NFI_BASE+0x0100)) ++#define NFI_LOCKCON_REG32 ((volatile P_U32)(NFI_BASE+0x0104)) ++#define NFI_LOCKANOB_REG16 ((volatile P_U16)(NFI_BASE+0x0108)) ++#define NFI_LOCK00ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0110)) ++#define NFI_LOCK00FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0114)) ++#define NFI_LOCK01ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0118)) ++#define NFI_LOCK01FMT_REG32 ((volatile P_U32)(NFI_BASE+0x011C)) ++#define NFI_LOCK02ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0120)) ++#define NFI_LOCK02FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0124)) ++#define NFI_LOCK03ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0128)) ++#define NFI_LOCK03FMT_REG32 ((volatile P_U32)(NFI_BASE+0x012C)) ++#define NFI_LOCK04ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0130)) ++#define NFI_LOCK04FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0134)) ++#define NFI_LOCK05ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0138)) ++#define NFI_LOCK05FMT_REG32 ((volatile P_U32)(NFI_BASE+0x013C)) ++#define NFI_LOCK06ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0140)) ++#define NFI_LOCK06FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0144)) ++#define NFI_LOCK07ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0148)) ++#define NFI_LOCK07FMT_REG32 ((volatile P_U32)(NFI_BASE+0x014C)) ++#define NFI_LOCK08ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0150)) ++#define NFI_LOCK08FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0154)) ++#define NFI_LOCK09ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0158)) ++#define NFI_LOCK09FMT_REG32 ((volatile P_U32)(NFI_BASE+0x015C)) ++#define NFI_LOCK10ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0160)) ++#define NFI_LOCK10FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0164)) ++#define NFI_LOCK11ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0168)) ++#define NFI_LOCK11FMT_REG32 ((volatile P_U32)(NFI_BASE+0x016C)) ++#define NFI_LOCK12ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0170)) ++#define NFI_LOCK12FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0174)) ++#define NFI_LOCK13ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0178)) ++#define NFI_LOCK13FMT_REG32 ((volatile P_U32)(NFI_BASE+0x017C)) ++#define NFI_LOCK14ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0180)) ++#define NFI_LOCK14FMT_REG32 ((volatile P_U32)(NFI_BASE+0x0184)) ++#define NFI_LOCK15ADD_REG32 ((volatile P_U32)(NFI_BASE+0x0188)) ++#define NFI_LOCK15FMT_REG32 ((volatile P_U32)(NFI_BASE+0x018C)) ++ ++#define NFI_FIFODATA0_REG32 ((volatile P_U32)(NFI_BASE+0x0190)) ++#define NFI_FIFODATA1_REG32 ((volatile P_U32)(NFI_BASE+0x0194)) ++#define NFI_FIFODATA2_REG32 ((volatile P_U32)(NFI_BASE+0x0198)) ++#define NFI_FIFODATA3_REG32 ((volatile P_U32)(NFI_BASE+0x019C)) ++#define NFI_MASTERSTA_REG16 ((volatile P_U16)(NFI_BASE+0x0210)) ++ ++ ++/******************************************************************************* ++ * NFI Register Field Definition ++ *******************************************************************************/ ++ ++/* NFI_CNFG */ ++#define CNFG_AHB (0x0001) ++#define CNFG_READ_EN (0x0002) ++#define CNFG_DMA_BURST_EN (0x0004) ++#define CNFG_BYTE_RW (0x0040) ++#define CNFG_HW_ECC_EN (0x0100) ++#define CNFG_AUTO_FMT_EN (0x0200) ++#define CNFG_OP_IDLE (0x0000) ++#define CNFG_OP_READ (0x1000) ++#define CNFG_OP_SRD (0x2000) ++#define CNFG_OP_PRGM (0x3000) ++#define CNFG_OP_ERASE (0x4000) ++#define CNFG_OP_RESET (0x5000) ++#define CNFG_OP_CUST (0x6000) ++#define CNFG_OP_MODE_MASK (0x7000) ++#define CNFG_OP_MODE_SHIFT (12) ++ ++/* NFI_PAGEFMT */ ++#define PAGEFMT_512 (0x0000) ++#define PAGEFMT_2K (0x0001) ++#define PAGEFMT_4K (0x0002) ++ ++#define PAGEFMT_PAGE_MASK (0x0003) ++ ++#define PAGEFMT_DBYTE_EN (0x0008) ++ ++#define PAGEFMT_SPARE_16 (0x0000) ++#define PAGEFMT_SPARE_26 (0x0001) ++#define PAGEFMT_SPARE_27 (0x0002) ++#define PAGEFMT_SPARE_28 (0x0003) ++#define PAGEFMT_SPARE_MASK (0x0030) ++#define PAGEFMT_SPARE_SHIFT (4) ++ ++#define PAGEFMT_FDM_MASK (0x0F00) ++#define PAGEFMT_FDM_SHIFT (8) ++ ++#define PAGEFMT_FDM_ECC_MASK (0xF000) ++#define PAGEFMT_FDM_ECC_SHIFT (12) ++ ++/* NFI_CON */ ++#define CON_FIFO_FLUSH (0x0001) ++#define CON_NFI_RST (0x0002) ++#define CON_NFI_SRD (0x0010) ++ ++#define CON_NFI_NOB_MASK (0x0060) ++#define CON_NFI_NOB_SHIFT (5) ++ ++#define CON_NFI_BRD (0x0100) ++#define CON_NFI_BWR (0x0200) ++ ++#define CON_NFI_SEC_MASK (0xF000) ++#define CON_NFI_SEC_SHIFT (12) ++ ++/* NFI_ACCCON */ ++#define ACCCON_SETTING () ++ ++/* NFI_INTR_EN */ ++#define INTR_RD_DONE_EN (0x0001) ++#define INTR_WR_DONE_EN (0x0002) ++#define INTR_RST_DONE_EN (0x0004) ++#define INTR_ERASE_DONE_EN (0x0008) ++#define INTR_BSY_RTN_EN (0x0010) ++#define INTR_ACC_LOCK_EN (0x0020) ++#define INTR_AHB_DONE_EN (0x0040) ++#define INTR_ALL_INTR_DE (0x0000) ++#define INTR_ALL_INTR_EN (0x007F) ++ ++/* NFI_INTR */ ++#define INTR_RD_DONE (0x0001) ++#define INTR_WR_DONE (0x0002) ++#define INTR_RST_DONE (0x0004) ++#define INTR_ERASE_DONE (0x0008) ++#define INTR_BSY_RTN (0x0010) ++#define INTR_ACC_LOCK (0x0020) ++#define INTR_AHB_DONE (0x0040) ++ ++/* NFI_ADDRNOB */ ++#define ADDR_COL_NOB_MASK (0x0003) ++#define ADDR_COL_NOB_SHIFT (0) ++#define ADDR_ROW_NOB_MASK (0x0030) ++#define ADDR_ROW_NOB_SHIFT (4) ++ ++/* NFI_STA */ ++#define STA_READ_EMPTY (0x00001000) ++#define STA_ACC_LOCK (0x00000010) ++#define STA_CMD_STATE (0x00000001) ++#define STA_ADDR_STATE (0x00000002) ++#define STA_DATAR_STATE (0x00000004) ++#define STA_DATAW_STATE (0x00000008) ++ ++#define STA_NAND_FSM_MASK (0x1F000000) ++#define STA_NAND_BUSY (0x00000100) ++#define STA_NAND_BUSY_RETURN (0x00000200) ++#define STA_NFI_FSM_MASK (0x000F0000) ++#define STA_NFI_OP_MASK (0x0000000F) ++ ++/* NFI_FIFOSTA */ ++#define FIFO_RD_EMPTY (0x0040) ++#define FIFO_RD_FULL (0x0080) ++#define FIFO_WR_FULL (0x8000) ++#define FIFO_WR_EMPTY (0x4000) ++#define FIFO_RD_REMAIN(x) (0x1F&(x)) ++#define FIFO_WR_REMAIN(x) ((0x1F00&(x))>>8) ++ ++/* NFI_ADDRCNTR */ ++#define ADDRCNTR_CNTR(x) ((0xF000&(x))>>12) ++#define ADDRCNTR_OFFSET(x) (0x03FF&(x)) ++ ++/* NFI_LOCK */ ++#define NFI_LOCK_ON (0x0001) ++ ++/* NFI_LOCKANOB */ ++#define PROG_RADD_NOB_MASK (0x7000) ++#define PROG_RADD_NOB_SHIFT (12) ++#define PROG_CADD_NOB_MASK (0x0300) ++#define PROG_CADD_NOB_SHIFT (8) ++#define ERASE_RADD_NOB_MASK (0x0070) ++#define ERASE_RADD_NOB_SHIFT (4) ++#define ERASE_CADD_NOB_MASK (0x0007) ++#define ERASE_CADD_NOB_SHIFT (0) ++ ++/******************************************************************************* ++ * ECC Register Definition ++ *******************************************************************************/ ++ ++#define ECC_ENCCON_REG16 ((volatile P_U16)(NFIECC_BASE+0x0000)) ++#define ECC_ENCCNFG_REG32 ((volatile P_U32)(NFIECC_BASE+0x0004)) ++#define ECC_ENCDIADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x0008)) ++#define ECC_ENCIDLE_REG32 ((volatile P_U32)(NFIECC_BASE+0x000C)) ++#define ECC_ENCPAR0_REG32 ((volatile P_U32)(NFIECC_BASE+0x0010)) ++#define ECC_ENCPAR1_REG32 ((volatile P_U32)(NFIECC_BASE+0x0014)) ++#define ECC_ENCPAR2_REG32 ((volatile P_U32)(NFIECC_BASE+0x0018)) ++#define ECC_ENCPAR3_REG32 ((volatile P_U32)(NFIECC_BASE+0x001C)) ++#define ECC_ENCPAR4_REG32 ((volatile P_U32)(NFIECC_BASE+0x0020)) ++#define ECC_ENCSTA_REG32 ((volatile P_U32)(NFIECC_BASE+0x0024)) ++#define ECC_ENCIRQEN_REG16 ((volatile P_U16)(NFIECC_BASE+0x0028)) ++#define ECC_ENCIRQSTA_REG16 ((volatile P_U16)(NFIECC_BASE+0x002C)) ++ ++#define ECC_DECCON_REG16 ((volatile P_U16)(NFIECC_BASE+0x0100)) ++#define ECC_DECCNFG_REG32 ((volatile P_U32)(NFIECC_BASE+0x0104)) ++#define ECC_DECDIADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x0108)) ++#define ECC_DECIDLE_REG16 ((volatile P_U16)(NFIECC_BASE+0x010C)) ++#define ECC_DECFER_REG16 ((volatile P_U16)(NFIECC_BASE+0x0110)) ++#define ECC_DECENUM_REG32 ((volatile P_U32)(NFIECC_BASE+0x0114)) ++#define ECC_DECDONE_REG16 ((volatile P_U16)(NFIECC_BASE+0x0118)) ++#define ECC_DECEL0_REG32 ((volatile P_U32)(NFIECC_BASE+0x011C)) ++#define ECC_DECEL1_REG32 ((volatile P_U32)(NFIECC_BASE+0x0120)) ++#define ECC_DECEL2_REG32 ((volatile P_U32)(NFIECC_BASE+0x0124)) ++#define ECC_DECEL3_REG32 ((volatile P_U32)(NFIECC_BASE+0x0128)) ++#define ECC_DECEL4_REG32 ((volatile P_U32)(NFIECC_BASE+0x012C)) ++#define ECC_DECEL5_REG32 ((volatile P_U32)(NFIECC_BASE+0x0130)) ++#define ECC_DECIRQEN_REG16 ((volatile P_U16)(NFIECC_BASE+0x0134)) ++#define ECC_DECIRQSTA_REG16 ((volatile P_U16)(NFIECC_BASE+0x0138)) ++#define ECC_FDMADDR_REG32 ((volatile P_U32)(NFIECC_BASE+0x013C)) ++#define ECC_DECFSM_REG32 ((volatile P_U32)(NFIECC_BASE+0x0140)) ++#define ECC_SYNSTA_REG32 ((volatile P_U32)(NFIECC_BASE+0x0144)) ++#define ECC_DECNFIDI_REG32 ((volatile P_U32)(NFIECC_BASE+0x0148)) ++#define ECC_SYN0_REG32 ((volatile P_U32)(NFIECC_BASE+0x014C)) ++ ++/******************************************************************************* ++ * ECC register definition ++ *******************************************************************************/ ++/* ECC_ENCON */ ++#define ENC_EN (0x0001) ++#define ENC_DE (0x0000) ++ ++/* ECC_ENCCNFG */ ++#define ECC_CNFG_ECC4 (0x0000) ++#define ECC_CNFG_ECC6 (0x0001) ++#define ECC_CNFG_ECC8 (0x0002) ++#define ECC_CNFG_ECC10 (0x0003) ++#define ECC_CNFG_ECC12 (0x0004) ++#define ECC_CNFG_ECC_MASK (0x00000007) ++ ++#define ENC_CNFG_NFI (0x0010) ++#define ENC_CNFG_MODE_MASK (0x0010) ++ ++#define ENC_CNFG_META6 (0x10300000) ++#define ENC_CNFG_META8 (0x10400000) ++ ++#define ENC_CNFG_MSG_MASK (0x1FFF0000) ++#define ENC_CNFG_MSG_SHIFT (0x10) ++ ++/* ECC_ENCIDLE */ ++#define ENC_IDLE (0x0001) ++ ++/* ECC_ENCSTA */ ++#define STA_FSM (0x001F) ++#define STA_COUNT_PS (0xFF10) ++#define STA_COUNT_MS (0x3FFF0000) ++ ++/* ECC_ENCIRQEN */ ++#define ENC_IRQEN (0x0001) ++ ++/* ECC_ENCIRQSTA */ ++#define ENC_IRQSTA (0x0001) ++ ++/* ECC_DECCON */ ++#define DEC_EN (0x0001) ++#define DEC_DE (0x0000) ++ ++/* ECC_ENCCNFG */ ++#define DEC_CNFG_ECC4 (0x0000) ++//#define DEC_CNFG_ECC6 (0x0001) ++//#define DEC_CNFG_ECC12 (0x0002) ++#define DEC_CNFG_NFI (0x0010) ++//#define DEC_CNFG_META6 (0x10300000) ++//#define DEC_CNFG_META8 (0x10400000) ++ ++#define DEC_CNFG_FER (0x01000) ++#define DEC_CNFG_EL (0x02000) ++#define DEC_CNFG_CORRECT (0x03000) ++#define DEC_CNFG_TYPE_MASK (0x03000) ++ ++#define DEC_CNFG_EMPTY_EN (0x80000000) ++ ++#define DEC_CNFG_CODE_MASK (0x1FFF0000) ++#define DEC_CNFG_CODE_SHIFT (0x10) ++ ++/* ECC_DECIDLE */ ++#define DEC_IDLE (0x0001) ++ ++/* ECC_DECFER */ ++#define DEC_FER0 (0x0001) ++#define DEC_FER1 (0x0002) ++#define DEC_FER2 (0x0004) ++#define DEC_FER3 (0x0008) ++#define DEC_FER4 (0x0010) ++#define DEC_FER5 (0x0020) ++#define DEC_FER6 (0x0040) ++#define DEC_FER7 (0x0080) ++ ++/* ECC_DECENUM */ ++#define ERR_NUM0 (0x0000000F) ++#define ERR_NUM1 (0x000000F0) ++#define ERR_NUM2 (0x00000F00) ++#define ERR_NUM3 (0x0000F000) ++#define ERR_NUM4 (0x000F0000) ++#define ERR_NUM5 (0x00F00000) ++#define ERR_NUM6 (0x0F000000) ++#define ERR_NUM7 (0xF0000000) ++ ++/* ECC_DECDONE */ ++#define DEC_DONE0 (0x0001) ++#define DEC_DONE1 (0x0002) ++#define DEC_DONE2 (0x0004) ++#define DEC_DONE3 (0x0008) ++#define DEC_DONE4 (0x0010) ++#define DEC_DONE5 (0x0020) ++#define DEC_DONE6 (0x0040) ++#define DEC_DONE7 (0x0080) ++ ++/* ECC_DECIRQEN */ ++#define DEC_IRQEN (0x0001) ++ ++/* ECC_DECIRQSTA */ ++#define DEC_IRQSTA (0x0001) ++ ++#define CHIPVER_ECO_1 (0x8a00) ++#define CHIPVER_ECO_2 (0x8a01) ++ ++//#define NAND_PFM ++ ++/******************************************************************************* ++ * Data Structure Definition ++ *******************************************************************************/ ++struct mtk_nand_host ++{ ++ struct nand_chip nand_chip; ++ struct mtd_info mtd; ++ struct mtk_nand_host_hw *hw; ++}; ++ ++struct NAND_CMD ++{ ++ u32 u4ColAddr; ++ u32 u4RowAddr; ++ u32 u4OOBRowAddr; ++ u8 au1OOB[288]; ++ u8* pDataBuf; ++#ifdef NAND_PFM ++ u32 pureReadOOB; ++ u32 pureReadOOBNum; ++#endif ++}; ++ ++/* ++ * ECC layout control structure. Exported to userspace for ++ * diagnosis and to allow creation of raw images ++struct nand_ecclayout { ++ uint32_t eccbytes; ++ uint32_t eccpos[64]; ++ uint32_t oobavail; ++ struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES]; ++}; ++*/ ++#define __DEBUG_NAND 1 /* Debug information on/off */ ++ ++/* Debug message event */ ++#define DBG_EVT_NONE 0x00000000 /* No event */ ++#define DBG_EVT_INIT 0x00000001 /* Initial related event */ ++#define DBG_EVT_VERIFY 0x00000002 /* Verify buffer related event */ ++#define DBG_EVT_PERFORMANCE 0x00000004 /* Performance related event */ ++#define DBG_EVT_READ 0x00000008 /* Read related event */ ++#define DBG_EVT_WRITE 0x00000010 /* Write related event */ ++#define DBG_EVT_ERASE 0x00000020 /* Erase related event */ ++#define DBG_EVT_BADBLOCK 0x00000040 /* Badblock related event */ ++#define DBG_EVT_POWERCTL 0x00000080 /* Suspend/Resume related event */ ++ ++#define DBG_EVT_ALL 0xffffffff ++ ++#define DBG_EVT_MASK (DBG_EVT_INIT) ++ ++#if __DEBUG_NAND ++#define MSG(evt, fmt, args...) \ ++do { \ ++ if ((DBG_EVT_##evt) & DBG_EVT_MASK) { \ ++ printk(fmt, ##args); \ ++ } \ ++} while(0) ++ ++#define MSG_FUNC_ENTRY(f) MSG(FUC, "<FUN_ENT>: %s\n", __FUNCTION__) ++#else ++#define MSG(evt, fmt, args...) do{}while(0) ++#define MSG_FUNC_ENTRY(f) do{}while(0) ++#endif ++ ++#define RAMDOM_READ 1<<0 ++#define CACHE_READ 1<<1 ++ ++typedef struct ++{ ++ u16 id; //deviceid+menuid ++ u32 ext_id; ++ u8 addr_cycle; ++ u8 iowidth; ++ u16 totalsize; ++ u16 blocksize; ++ u16 pagesize; ++ u16 sparesize; ++ u32 timmingsetting; ++ char devciename[14]; ++ u32 advancedmode; // ++}flashdev_info,*pflashdev_info; ++ ++/* NAND driver */ ++#if 0 ++struct mtk_nand_host_hw { ++ unsigned int nfi_bus_width; /* NFI_BUS_WIDTH */ ++ unsigned int nfi_access_timing; /* NFI_ACCESS_TIMING */ ++ unsigned int nfi_cs_num; /* NFI_CS_NUM */ ++ unsigned int nand_sec_size; /* NAND_SECTOR_SIZE */ ++ unsigned int nand_sec_shift; /* NAND_SECTOR_SHIFT */ ++ unsigned int nand_ecc_size; ++ unsigned int nand_ecc_bytes; ++ unsigned int nand_ecc_mode; ++}; ++extern struct mtk_nand_host_hw mt7621_nand_hw; ++extern u32 CFG_BLOCKSIZE; ++#endif ++#endif +diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c +index 9715a7b..86e2a12 100644 +--- a/drivers/mtd/nand/nand_base.c ++++ b/drivers/mtd/nand/nand_base.c +@@ -92,7 +92,7 @@ static struct nand_ecclayout nand_oob_128 = { + .length = 78} } + }; + +-static int nand_get_device(struct mtd_info *mtd, int new_state); ++int nand_get_device(struct mtd_info *mtd, int new_state); + + static int nand_do_write_oob(struct mtd_info *mtd, loff_t to, + struct mtd_oob_ops *ops); +@@ -130,7 +130,7 @@ static int check_offs_len(struct mtd_info *mtd, + * + * Release chip lock and wake up anyone waiting on the device. + */ +-static void nand_release_device(struct mtd_info *mtd) ++void nand_release_device(struct mtd_info *mtd) + { + struct nand_chip *chip = mtd->priv; + +@@ -783,7 +783,7 @@ static void panic_nand_get_device(struct nand_chip *chip, + * + * Get the device and lock it for exclusive access + */ +-static int ++int + nand_get_device(struct mtd_info *mtd, int new_state) + { + struct nand_chip *chip = mtd->priv; +diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c +index c0615d1..b34cb41 100644 +--- a/drivers/mtd/nand/nand_bbt.c ++++ b/drivers/mtd/nand/nand_bbt.c +@@ -1360,4 +1360,23 @@ int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs) + return ret; + } + ++void nand_bbt_set(struct mtd_info *mtd, int page, int flag) ++{ ++ struct nand_chip *this = mtd->priv; ++ int block; ++ ++ block = (int)(page >> (this->bbt_erase_shift - this->page_shift - 1)); ++ this->bbt[block >> 3] &= ~(0x03 << (block & 0x6)); ++ this->bbt[block >> 3] |= (flag & 0x3) << (block & 0x6); ++} ++ ++int nand_bbt_get(struct mtd_info *mtd, int page) ++{ ++ struct nand_chip *this = mtd->priv; ++ int block; ++ ++ block = (int)(page >> (this->bbt_erase_shift - this->page_shift - 1)); ++ return (this->bbt[block >> 3] >> (block & 0x06)) & 0x03; ++} ++ + EXPORT_SYMBOL(nand_scan_bbt); +diff --git a/drivers/mtd/nand/nand_def.h b/drivers/mtd/nand/nand_def.h +new file mode 100644 +index 0000000..82e957d +--- /dev/null ++++ b/drivers/mtd/nand/nand_def.h +@@ -0,0 +1,123 @@ ++#ifndef __NAND_DEF_H__ ++#define __NAND_DEF_H__ ++ ++#define VERSION "v2.1 Fix AHB virt2phys error" ++#define MODULE_NAME "# MTK NAND #" ++#define PROCNAME "driver/nand" ++ ++#undef TESTTIME ++//#define __UBOOT_NAND__ 1 ++#define __KERNEL_NAND__ 1 ++//#define __PRELOADER_NAND__ 1 ++//#define PMT 1 ++//#define _MTK_NAND_DUMMY_DRIVER ++//#define CONFIG_BADBLOCK_CHECK 1 ++//#ifdef CONFIG_BADBLOCK_CHECK ++//#define MTK_NAND_BMT 1 ++//#endif ++#define ECC_ENABLE 1 ++#define MANUAL_CORRECT 1 ++//#define __INTERNAL_USE_AHB_MODE__ (0) ++#define SKIP_BAD_BLOCK ++#define FACT_BBT ++ ++#ifndef NAND_OTP_SUPPORT ++#define NAND_OTP_SUPPORT 0 ++#endif ++ ++/******************************************************************************* ++ * Macro definition ++ *******************************************************************************/ ++//#define NFI_SET_REG32(reg, value) (DRV_WriteReg32(reg, DRV_Reg32(reg) | (value))) ++//#define NFI_SET_REG16(reg, value) (DRV_WriteReg16(reg, DRV_Reg16(reg) | (value))) ++//#define NFI_CLN_REG32(reg, value) (DRV_WriteReg32(reg, DRV_Reg32(reg) & (~(value)))) ++//#define NFI_CLN_REG16(reg, value) (DRV_WriteReg16(reg, DRV_Reg16(reg) & (~(value)))) ++ ++#if defined (__KERNEL_NAND__) ++#define NFI_SET_REG32(reg, value) \ ++do { \ ++ g_value = (DRV_Reg32(reg) | (value));\ ++ DRV_WriteReg32(reg, g_value); \ ++} while(0) ++ ++#define NFI_SET_REG16(reg, value) \ ++do { \ ++ g_value = (DRV_Reg16(reg) | (value));\ ++ DRV_WriteReg16(reg, g_value); \ ++} while(0) ++ ++#define NFI_CLN_REG32(reg, value) \ ++do { \ ++ g_value = (DRV_Reg32(reg) & (~(value)));\ ++ DRV_WriteReg32(reg, g_value); \ ++} while(0) ++ ++#define NFI_CLN_REG16(reg, value) \ ++do { \ ++ g_value = (DRV_Reg16(reg) & (~(value)));\ ++ DRV_WriteReg16(reg, g_value); \ ++} while(0) ++#endif ++ ++#define NFI_WAIT_STATE_DONE(state) do{;}while (__raw_readl(NFI_STA_REG32) & state) ++#define NFI_WAIT_TO_READY() do{;}while (!(__raw_readl(NFI_STA_REG32) & STA_BUSY2READY)) ++ ++ ++#define NAND_SECTOR_SIZE (512) ++#define OOB_PER_SECTOR (16) ++#define OOB_AVAI_PER_SECTOR (8) ++ ++#ifndef PART_SIZE_BMTPOOL ++#define BMT_POOL_SIZE (80) ++#else ++#define BMT_POOL_SIZE (PART_SIZE_BMTPOOL) ++#endif ++ ++#define PMT_POOL_SIZE (2) ++ ++#define TIMEOUT_1 0x1fff ++#define TIMEOUT_2 0x8ff ++#define TIMEOUT_3 0xffff ++#define TIMEOUT_4 0xffff//5000 //PIO ++ ++ ++/* temporarity definiation */ ++#if !defined (__KERNEL_NAND__) ++#define KERN_INFO ++#define KERN_WARNING ++#define KERN_ERR ++#define PAGE_SIZE (4096) ++#endif ++#define AddStorageTrace //AddStorageTrace ++#define STORAGE_LOGGER_MSG_NAND 0 ++#define NFI_BASE RALINK_NAND_CTRL_BASE ++#define NFIECC_BASE RALINK_NANDECC_CTRL_BASE ++ ++#ifdef __INTERNAL_USE_AHB_MODE__ ++#define MT65xx_POLARITY_LOW 0 ++#define MT65XX_PDN_PERI_NFI 0 ++#define MT65xx_EDGE_SENSITIVE 0 ++#define MT6575_NFI_IRQ_ID (58) ++#endif ++ ++#if defined (__KERNEL_NAND__) ++#define RALINK_REG(x) (*((volatile u32 *)(x))) ++#define __virt_to_phys(x) virt_to_phys((volatile void*)x) ++#else ++#define CONFIG_MTD_NAND_VERIFY_WRITE (1) ++#define printk printf ++#define ra_dbg printf ++#define BUG() //BUG() ++#define BUG_ON(x) //BUG_ON() ++#define NUM_PARTITIONS 1 ++#endif ++ ++#define NFI_DEFAULT_ACCESS_TIMING (0x30C77fff) //(0x44333) ++ ++//uboot only support 1 cs ++#define NFI_CS_NUM (1) ++#define NFI_DEFAULT_CS (0) ++ ++#include "mt6575_typedefs.h" ++ ++#endif /* __NAND_DEF_H__ */ +diff --git a/drivers/mtd/nand/nand_device_list.h b/drivers/mtd/nand/nand_device_list.h +new file mode 100644 +index 0000000..4c36b3a +--- /dev/null ++++ b/drivers/mtd/nand/nand_device_list.h +@@ -0,0 +1,55 @@ ++/* Copyright Statement: ++ * ++ * This software/firmware and related documentation ("MediaTek Software") are ++ * protected under relevant copyright laws. The information contained herein ++ * is confidential and proprietary to MediaTek Inc. and/or its licensors. ++ * Without the prior written permission of MediaTek inc. and/or its licensors, ++ * any reproduction, modification, use or disclosure of MediaTek Software, ++ * and information contained herein, in whole or in part, shall be strictly prohibited. ++ */ ++/* MediaTek Inc. (C) 2010. All rights reserved. ++ * ++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES ++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") ++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON ++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. ++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR ++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH ++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES ++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES ++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK ++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR ++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND ++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, ++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, ++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO ++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. ++ * ++ * The following software/firmware and/or related documentation ("MediaTek Software") ++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's ++ * applicable license agreements with MediaTek Inc. ++ */ ++ ++#ifndef __NAND_DEVICE_LIST_H__ ++#define __NAND_DEVICE_LIST_H__ ++ ++static const flashdev_info gen_FlashTable[]={ ++ {0x20BC, 0x105554, 5, 16, 512, 128, 2048, 64, 0x1123, "EHD013151MA_5", 0}, ++ {0xECBC, 0x005554, 5, 16, 512, 128, 2048, 64, 0x1123, "K524G2GACB_A0", 0}, ++ {0x2CBC, 0x905556, 5, 16, 512, 128, 2048, 64, 0x21044333, "MT29C4G96MAZA", 0}, ++ {0xADBC, 0x905554, 5, 16, 512, 128, 2048, 64, 0x10801011, "H9DA4GH4JJAMC", 0}, ++ {0x01F1, 0x801D01, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "S34ML01G100TF", 0}, ++ {0x92F1, 0x8095FF, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "F59L1G81A", 0}, ++ {0xECD3, 0x519558, 5, 8, 1024, 128, 2048, 64, 0x44333, "K9K8G8000", 0}, ++ {0xC2F1, 0x801DC2, 4, 8, 128, 128, 2048, 64, 0x30C77fff, "MX30LF1G08AA", 0}, ++ {0x98D3, 0x902676, 5, 8, 1024, 256, 4096, 224, 0x00C25332, "TC58NVG3S0F", 0}, ++ {0x01DA, 0x909546, 5, 8, 256, 128, 2048, 128, 0x30C77fff, "S34ML02G200TF", 0}, ++ {0x01DC, 0x909556, 5, 8, 512, 128, 2048, 128, 0x30C77fff, "S34ML04G200TF", 0}, ++ {0x0000, 0x000000, 0, 0, 0, 0, 0, 0, 0, "xxxxxxxxxx", 0}, ++}; ++ ++ ++#endif +diff --git a/drivers/mtd/nand/partition.h b/drivers/mtd/nand/partition.h +new file mode 100644 +index 0000000..034e1af +--- /dev/null ++++ b/drivers/mtd/nand/partition.h +@@ -0,0 +1,115 @@ ++/* Copyright Statement: ++ * ++ * This software/firmware and related documentation ("MediaTek Software") are ++ * protected under relevant copyright laws. The information contained herein ++ * is confidential and proprietary to MediaTek Inc. and/or its licensors. ++ * Without the prior written permission of MediaTek inc. and/or its licensors, ++ * any reproduction, modification, use or disclosure of MediaTek Software, ++ * and information contained herein, in whole or in part, shall be strictly prohibited. ++ */ ++/* MediaTek Inc. (C) 2010. All rights reserved. ++ * ++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES ++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") ++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON ++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. ++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR ++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH ++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES ++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES ++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK ++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR ++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND ++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, ++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, ++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO ++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. ++ * ++ * The following software/firmware and/or related documentation ("MediaTek Software") ++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's ++ * applicable license agreements with MediaTek Inc. ++ */ ++ ++#include <linux/mtd/mtd.h> ++#include <linux/mtd/nand.h> ++#include <linux/mtd/partitions.h> ++ ++#define RECONFIG_PARTITION_SIZE 1 ++ ++#define MTD_BOOT_PART_SIZE 0x80000 ++#define MTD_CONFIG_PART_SIZE 0x20000 ++#define MTD_FACTORY_PART_SIZE 0x20000 ++ ++extern unsigned int CFG_BLOCKSIZE; ++#define LARGE_MTD_BOOT_PART_SIZE (CFG_BLOCKSIZE<<2) ++#define LARGE_MTD_CONFIG_PART_SIZE (CFG_BLOCKSIZE<<2) ++#define LARGE_MTD_FACTORY_PART_SIZE (CFG_BLOCKSIZE<<1) ++ ++/*=======================================================================*/ ++/* NAND PARTITION Mapping */ ++/*=======================================================================*/ ++//#ifdef CONFIG_MTD_PARTITIONS ++static struct mtd_partition g_pasStatic_Partition[] = { ++ { ++ name: "ALL", ++ size: MTDPART_SIZ_FULL, ++ offset: 0, ++ }, ++ /* Put your own partition definitions here */ ++ { ++ name: "Bootloader", ++ size: MTD_BOOT_PART_SIZE, ++ offset: 0, ++ }, { ++ name: "Config", ++ size: MTD_CONFIG_PART_SIZE, ++ offset: MTDPART_OFS_APPEND ++ }, { ++ name: "Factory", ++ size: MTD_FACTORY_PART_SIZE, ++ offset: MTDPART_OFS_APPEND ++#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH ++ }, { ++ name: "Kernel", ++ size: MTD_KERN_PART_SIZE, ++ offset: MTDPART_OFS_APPEND, ++ }, { ++ name: "RootFS", ++ size: MTD_ROOTFS_PART_SIZE, ++ offset: MTDPART_OFS_APPEND, ++#ifdef CONFIG_ROOTFS_IN_FLASH_NO_PADDING ++ }, { ++ name: "Kernel_RootFS", ++ size: MTD_KERN_PART_SIZE + MTD_ROOTFS_PART_SIZE, ++ offset: MTD_BOOT_PART_SIZE + MTD_CONFIG_PART_SIZE + MTD_FACTORY_PART_SIZE, ++#endif ++#else //CONFIG_RT2880_ROOTFS_IN_RAM ++ }, { ++ name: "Kernel", ++ size: 0x10000, ++ offset: MTDPART_OFS_APPEND, ++#endif ++#ifdef CONFIG_DUAL_IMAGE ++ }, { ++ name: "Kernel2", ++ size: MTD_KERN2_PART_SIZE, ++ offset: MTD_KERN2_PART_OFFSET, ++#ifdef CONFIG_RT2880_ROOTFS_IN_FLASH ++ }, { ++ name: "RootFS2", ++ size: MTD_ROOTFS2_PART_SIZE, ++ offset: MTD_ROOTFS2_PART_OFFSET, ++#endif ++#endif ++ } ++ ++}; ++ ++#define NUM_PARTITIONS ARRAY_SIZE(g_pasStatic_Partition) ++extern int part_num; // = NUM_PARTITIONS; ++//#endif ++#undef RECONFIG_PARTITION_SIZE ++ +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0046-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-3.14/0046-DT-Add-documentation-for-gpio-ralink.patch new file mode 100644 index 0000000000..36b56b4910 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0046-DT-Add-documentation-for-gpio-ralink.patch @@ -0,0 +1,65 @@ +From 6827bd971fc4f323fc91e4506771a13b827c49a3 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 28 Jul 2013 19:45:30 +0200 +Subject: [PATCH 46/57] DT: Add documentation for gpio-ralink + +Describe gpio-ralink binding. + +Signed-off-by: John Crispin <blogic@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: devicetree@vger.kernel.org +Cc: linux-gpio@vger.kernel.org +--- + .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++ + 1 file changed, 40 insertions(+) + create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt + +diff --git a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt +new file mode 100644 +index 0000000..b4acf02 +--- /dev/null ++++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt +@@ -0,0 +1,40 @@ ++Ralink SoC GPIO controller bindings ++ ++Required properties: ++- compatible: ++ - "ralink,rt2880-gpio" for Ralink controllers ++- #gpio-cells : Should be two. ++ - first cell is the pin number ++ - second cell is used to specify optional parameters (unused) ++- gpio-controller : Marks the device node as a GPIO controller ++- reg : Physical base address and length of the controller's registers ++- interrupt-parent: phandle to the INTC device node ++- interrupts : Specify the INTC interrupt number ++- ralink,num-gpios : Specify the number of GPIOs ++- ralink,register-map : The register layout depends on the GPIO bank and actual ++ SoC type. Register offsets need to be in this order. ++ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ] ++ ++Optional properties: ++- ralink,gpio-base : Specify the GPIO chips base number ++ ++Example: ++ ++ gpio0: gpio@600 { ++ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; ++ ++ #gpio-cells = <2>; ++ gpio-controller; ++ ++ reg = <0x600 0x34>; ++ ++ interrupt-parent = <&intc>; ++ interrupts = <6>; ++ ++ ralink,gpio-base = <0>; ++ ralink,num-gpios = <24>; ++ ralink,register-map = [ 00 04 08 0c ++ 20 24 28 2c ++ 30 34 ]; ++ ++ }; +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0047-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-3.14/0047-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch new file mode 100644 index 0000000000..bbdd522934 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0047-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch @@ -0,0 +1,433 @@ +From 4b23ed96930650076caa524ffdde898cb937bdaa Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 4 Aug 2014 20:36:29 +0200 +Subject: [PATCH 47/57] GPIO: MIPS: ralink: add gpio driver for ralink SoC + +Add gpio driver for Ralink SoC. This driver makes the gpio core on +RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work. + +Signed-off-by: John Crispin <blogic@openwrt.org> +Cc: linux-mips@linux-mips.org +Cc: linux-gpio@vger.kernel.org +--- + arch/mips/include/asm/mach-ralink/gpio.h | 24 +++ + drivers/gpio/Kconfig | 6 + + drivers/gpio/Makefile | 1 + + drivers/gpio/gpio-ralink.c | 345 ++++++++++++++++++++++++++++++ + 4 files changed, 376 insertions(+) + create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h + create mode 100644 drivers/gpio/gpio-ralink.c + +diff --git a/arch/mips/include/asm/mach-ralink/gpio.h b/arch/mips/include/asm/mach-ralink/gpio.h +new file mode 100644 +index 0000000..f68ee16 +--- /dev/null ++++ b/arch/mips/include/asm/mach-ralink/gpio.h +@@ -0,0 +1,24 @@ ++/* ++ * Ralink SoC GPIO API support ++ * ++ * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ ++ ++#ifndef __ASM_MACH_RALINK_GPIO_H ++#define __ASM_MACH_RALINK_GPIO_H ++ ++#define ARCH_NR_GPIOS 128 ++#include <asm-generic/gpio.h> ++ ++#define gpio_get_value __gpio_get_value ++#define gpio_set_value __gpio_set_value ++#define gpio_cansleep __gpio_cansleep ++#define gpio_to_irq __gpio_to_irq ++ ++#endif /* __ASM_MACH_RALINK_GPIO_H */ +diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig +index 903f24d..2d75a68 100644 +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -260,6 +260,12 @@ config GPIO_SCH311X + To compile this driver as a module, choose M here: the module will + be called gpio-sch311x. + ++config GPIO_RALINK ++ bool "Ralink GPIO Support" ++ depends on RALINK ++ help ++ Say yes here to support the Ralink SoC GPIO device ++ + config GPIO_SPEAR_SPICS + bool "ST SPEAr13xx SPI Chip Select as GPIO support" + depends on PLAT_SPEAR +diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile +index 5d50179..2cbdbe6 100644 +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -63,6 +63,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o + obj-$(CONFIG_GPIO_PCH) += gpio-pch.o + obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o + obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o ++obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o + obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o + obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o + obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o +diff --git a/drivers/gpio/gpio-ralink.c b/drivers/gpio/gpio-ralink.c +new file mode 100644 +index 0000000..7e5a2e9 +--- /dev/null ++++ b/drivers/gpio/gpio-ralink.c +@@ -0,0 +1,345 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/module.h> ++#include <linux/io.h> ++#include <linux/gpio.h> ++#include <linux/spinlock.h> ++#include <linux/platform_device.h> ++#include <linux/of_irq.h> ++#include <linux/irqdomain.h> ++#include <linux/interrupt.h> ++ ++enum ralink_gpio_reg { ++ GPIO_REG_INT = 0, ++ GPIO_REG_EDGE, ++ GPIO_REG_RENA, ++ GPIO_REG_FENA, ++ GPIO_REG_DATA, ++ GPIO_REG_DIR, ++ GPIO_REG_POL, ++ GPIO_REG_SET, ++ GPIO_REG_RESET, ++ GPIO_REG_TOGGLE, ++ GPIO_REG_MAX ++}; ++ ++struct ralink_gpio_chip { ++ struct gpio_chip chip; ++ u8 regs[GPIO_REG_MAX]; ++ ++ spinlock_t lock; ++ void __iomem *membase; ++ struct irq_domain *domain; ++ int irq; ++ ++ u32 rising; ++ u32 falling; ++}; ++ ++#define MAP_MAX 4 ++static struct irq_domain *irq_map[MAP_MAX]; ++static int irq_map_count; ++static atomic_t irq_refcount = ATOMIC_INIT(0); ++ ++static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip) ++{ ++ struct ralink_gpio_chip *rg; ++ ++ rg = container_of(chip, struct ralink_gpio_chip, chip); ++ ++ return rg; ++} ++ ++static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val) ++{ ++ iowrite32(val, rg->membase + rg->regs[reg]); ++} ++ ++static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg) ++{ ++ return ioread32(rg->membase + rg->regs[reg]); ++} ++ ++static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value) ++{ ++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); ++ ++ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset)); ++} ++ ++static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset) ++{ ++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); ++ ++ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset)); ++} ++ ++static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset) ++{ ++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); ++ unsigned long flags; ++ u32 t; ++ ++ spin_lock_irqsave(&rg->lock, flags); ++ t = rt_gpio_r32(rg, GPIO_REG_DIR); ++ t &= ~BIT(offset); ++ rt_gpio_w32(rg, GPIO_REG_DIR, t); ++ spin_unlock_irqrestore(&rg->lock, flags); ++ ++ return 0; ++} ++ ++static int ralink_gpio_direction_output(struct gpio_chip *chip, ++ unsigned offset, int value) ++{ ++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); ++ unsigned long flags; ++ u32 t; ++ ++ spin_lock_irqsave(&rg->lock, flags); ++ ralink_gpio_set(chip, offset, value); ++ t = rt_gpio_r32(rg, GPIO_REG_DIR); ++ t |= BIT(offset); ++ rt_gpio_w32(rg, GPIO_REG_DIR, t); ++ spin_unlock_irqrestore(&rg->lock, flags); ++ ++ return 0; ++} ++ ++static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin) ++{ ++ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); ++ ++ if (rg->irq < 1) ++ return -1; ++ ++ return irq_create_mapping(rg->domain, pin); ++} ++ ++static void ralink_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) ++{ ++ int i; ++ ++ for (i = 0; i < irq_map_count; i++) { ++ struct irq_domain *domain = irq_map[i]; ++ struct ralink_gpio_chip *rg; ++ unsigned long pending; ++ int bit; ++ ++ rg = (struct ralink_gpio_chip *) domain->host_data; ++ pending = rt_gpio_r32(rg, GPIO_REG_INT); ++ ++ for_each_set_bit(bit, &pending, rg->chip.ngpio) { ++ u32 map = irq_find_mapping(domain, bit); ++ generic_handle_irq(map); ++ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit)); ++ } ++ } ++} ++ ++static void ralink_gpio_irq_unmask(struct irq_data *d) ++{ ++ struct ralink_gpio_chip *rg; ++ unsigned long flags; ++ u32 val; ++ ++ rg = (struct ralink_gpio_chip *) d->domain->host_data; ++ val = rt_gpio_r32(rg, GPIO_REG_RENA); ++ ++ spin_lock_irqsave(&rg->lock, flags); ++ rt_gpio_w32(rg, GPIO_REG_RENA, val | (BIT(d->hwirq) & rg->rising)); ++ rt_gpio_w32(rg, GPIO_REG_FENA, val | (BIT(d->hwirq) & rg->falling)); ++ spin_unlock_irqrestore(&rg->lock, flags); ++} ++ ++static void ralink_gpio_irq_mask(struct irq_data *d) ++{ ++ struct ralink_gpio_chip *rg; ++ unsigned long flags; ++ u32 val; ++ ++ rg = (struct ralink_gpio_chip *) d->domain->host_data; ++ val = rt_gpio_r32(rg, GPIO_REG_RENA); ++ ++ spin_lock_irqsave(&rg->lock, flags); ++ rt_gpio_w32(rg, GPIO_REG_FENA, val & ~BIT(d->hwirq)); ++ rt_gpio_w32(rg, GPIO_REG_RENA, val & ~BIT(d->hwirq)); ++ spin_unlock_irqrestore(&rg->lock, flags); ++} ++ ++static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type) ++{ ++ struct ralink_gpio_chip *rg; ++ u32 mask = BIT(d->hwirq); ++ ++ rg = (struct ralink_gpio_chip *) d->domain->host_data; ++ ++ if (type == IRQ_TYPE_PROBE) { ++ if ((rg->rising | rg->falling) & mask) ++ return 0; ++ ++ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; ++ } ++ ++ if (type & IRQ_TYPE_EDGE_RISING) ++ rg->rising |= mask; ++ else ++ rg->rising &= ~mask; ++ ++ if (type & IRQ_TYPE_EDGE_FALLING) ++ rg->falling |= mask; ++ else ++ rg->falling &= ~mask; ++ ++ return 0; ++} ++ ++static struct irq_chip ralink_gpio_irq_chip = { ++ .name = "GPIO", ++ .irq_unmask = ralink_gpio_irq_unmask, ++ .irq_mask = ralink_gpio_irq_mask, ++ .irq_mask_ack = ralink_gpio_irq_mask, ++ .irq_set_type = ralink_gpio_irq_type, ++}; ++ ++static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) ++{ ++ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq); ++ irq_set_handler_data(irq, d); ++ ++ return 0; ++} ++ ++static const struct irq_domain_ops irq_domain_ops = { ++ .xlate = irq_domain_xlate_onecell, ++ .map = gpio_map, ++}; ++ ++static void ralink_gpio_irq_init(struct device_node *np, ++ struct ralink_gpio_chip *rg) ++{ ++ if (irq_map_count >= MAP_MAX) ++ return; ++ ++ rg->irq = irq_of_parse_and_map(np, 0); ++ if (!rg->irq) ++ return; ++ ++ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio, ++ &irq_domain_ops, rg); ++ if (!rg->domain) { ++ dev_err(rg->chip.dev, "irq_domain_add_linear failed\n"); ++ return; ++ } ++ ++ irq_map[irq_map_count++] = rg->domain; ++ ++ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0); ++ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0); ++ ++ if (!atomic_read(&irq_refcount)) ++ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler); ++ atomic_inc(&irq_refcount); ++ ++ dev_info(rg->chip.dev, "registering %d irq handlers\n", rg->chip.ngpio); ++} ++ ++static int ralink_gpio_request(struct gpio_chip *chip, unsigned offset) ++{ ++ int gpio = chip->base + offset; ++ ++ return pinctrl_request_gpio(gpio); ++} ++ ++static int ralink_gpio_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ struct ralink_gpio_chip *rg; ++ const __be32 *ngpio, *gpiobase; ++ ++ if (!res) { ++ dev_err(&pdev->dev, "failed to find resource\n"); ++ return -ENOMEM; ++ } ++ ++ rg = devm_kzalloc(&pdev->dev, ++ sizeof(struct ralink_gpio_chip), GFP_KERNEL); ++ if (!rg) ++ return -ENOMEM; ++ ++ rg->membase = devm_request_and_ioremap(&pdev->dev, res); ++ if (!rg->membase) { ++ dev_err(&pdev->dev, "cannot remap I/O memory region\n"); ++ return -ENOMEM; ++ } ++ ++ if (of_property_read_u8_array(np, "ralink,register-map", ++ rg->regs, GPIO_REG_MAX)) { ++ dev_err(&pdev->dev, "failed to read register definition\n"); ++ return -EINVAL; ++ } ++ ++ ngpio = of_get_property(np, "ralink,num-gpios", NULL); ++ if (!ngpio) { ++ dev_err(&pdev->dev, "failed to read number of pins\n"); ++ return -EINVAL; ++ } ++ ++ gpiobase = of_get_property(np, "ralink,gpio-base", NULL); ++ if (gpiobase) ++ rg->chip.base = be32_to_cpu(*gpiobase); ++ else ++ rg->chip.base = -1; ++ ++ spin_lock_init(&rg->lock); ++ ++ rg->chip.dev = &pdev->dev; ++ rg->chip.label = dev_name(&pdev->dev); ++ rg->chip.of_node = np; ++ rg->chip.ngpio = be32_to_cpu(*ngpio); ++ rg->chip.direction_input = ralink_gpio_direction_input; ++ rg->chip.direction_output = ralink_gpio_direction_output; ++ rg->chip.get = ralink_gpio_get; ++ rg->chip.set = ralink_gpio_set; ++ rg->chip.request = ralink_gpio_request; ++ rg->chip.to_irq = ralink_gpio_to_irq; ++ ++ /* set polarity to low for all lines */ ++ rt_gpio_w32(rg, GPIO_REG_POL, 0); ++ ++ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio); ++ ++ ralink_gpio_irq_init(np, rg); ++ ++ return gpiochip_add(&rg->chip); ++} ++ ++static const struct of_device_id ralink_gpio_match[] = { ++ { .compatible = "ralink,rt2880-gpio" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ralink_gpio_match); ++ ++static struct platform_driver ralink_gpio_driver = { ++ .probe = ralink_gpio_probe, ++ .driver = { ++ .name = "rt2880_gpio", ++ .owner = THIS_MODULE, ++ .of_match_table = ralink_gpio_match, ++ }, ++}; ++ ++static int __init ralink_gpio_init(void) ++{ ++ return platform_driver_register(&ralink_gpio_driver); ++} ++ ++subsys_initcall(ralink_gpio_init); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0048-GPIO-ralink-add-mt7621-gpio-controller.patch b/target/linux/ramips/patches-3.14/0048-GPIO-ralink-add-mt7621-gpio-controller.patch new file mode 100644 index 0000000000..9aa03a0949 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0048-GPIO-ralink-add-mt7621-gpio-controller.patch @@ -0,0 +1,240 @@ +From 8481cdf6f96dc16cbcc129d046c021d17a891274 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 11:00:32 +0100 +Subject: [PATCH 48/57] GPIO: ralink: add mt7621 gpio controller + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/Kconfig | 3 + + drivers/gpio/Kconfig | 6 ++ + drivers/gpio/Makefile | 1 + + drivers/gpio/gpio-mt7621.c | 177 ++++++++++++++++++++++++++++++++++++++++++++ + 4 files changed, 187 insertions(+) + create mode 100644 drivers/gpio/gpio-mt7621.c + +diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig +index 4ac98ca..fd3bbb1 100644 +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -437,6 +437,9 @@ config RALINK + select RESET_CONTROLLER + select PINCTRL + select PINCTRL_RT2880 ++ select ARCH_HAS_RESET_CONTROLLER ++ select RESET_CONTROLLER ++ select ARCH_REQUIRE_GPIOLIB + + config SGI_IP22 + bool "SGI IP22 (Indy/Indigo2)" +diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig +index 2d75a68..5dff8d5 100644 +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -827,6 +827,12 @@ config GPIO_BCM_KONA + help + Turn on GPIO support for Broadcom "Kona" chips. + ++config GPIO_MT7621 ++ bool "Mediatek GPIO Support" ++ depends on SOC_MT7620 || SOC_MT7621 ++ help ++ Say yes here to support the Mediatek SoC GPIO device ++ + comment "USB GPIO expanders:" + + config GPIO_VIPERBOARD +diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile +index 2cbdbe6..2365e34 100644 +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -100,3 +100,4 @@ obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o + obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o + obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o + obj-$(CONFIG_GPIO_XTENSA) += gpio-xtensa.o ++obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o +diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c +new file mode 100644 +index 0000000..7ae7eb9 +--- /dev/null ++++ b/drivers/gpio/gpio-mt7621.c +@@ -0,0 +1,177 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/io.h> ++#include <linux/err.h> ++#include <linux/gpio.h> ++#include <linux/module.h> ++#include <linux/of_irq.h> ++#include <linux/spinlock.h> ++#include <linux/irqdomain.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++ ++#define MTK_BANK_WIDTH 32 ++ ++enum mediatek_gpio_reg { ++ GPIO_REG_CTRL = 0, ++ GPIO_REG_POL, ++ GPIO_REG_DATA, ++ GPIO_REG_DSET, ++ GPIO_REG_DCLR, ++}; ++ ++static void __iomem *mtk_gc_membase; ++ ++struct mtk_gc { ++ struct gpio_chip chip; ++ spinlock_t lock; ++ int bank; ++}; ++ ++static inline struct mtk_gc ++*to_mediatek_gpio(struct gpio_chip *chip) ++{ ++ struct mtk_gc *mgc; ++ ++ mgc = container_of(chip, struct mtk_gc, chip); ++ ++ return mgc; ++} ++ ++static inline void ++mtk_gpio_w32(struct mtk_gc *rg, u8 reg, u32 val) ++{ ++ iowrite32(val, mtk_gc_membase + (reg * 0x10) + (rg->bank * 0x4)); ++} ++ ++static inline u32 ++mtk_gpio_r32(struct mtk_gc *rg, u8 reg) ++{ ++ return ioread32(mtk_gc_membase + (reg * 0x10) + (rg->bank * 0x4)); ++} ++ ++static void ++mediatek_gpio_set(struct gpio_chip *chip, unsigned offset, int value) ++{ ++ struct mtk_gc *rg = to_mediatek_gpio(chip); ++ ++ mtk_gpio_w32(rg, (value) ? GPIO_REG_DSET : GPIO_REG_DCLR, BIT(offset)); ++} ++ ++static int ++mediatek_gpio_get(struct gpio_chip *chip, unsigned offset) ++{ ++ struct mtk_gc *rg = to_mediatek_gpio(chip); ++ ++ return !!(mtk_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset)); ++} ++ ++static int ++mediatek_gpio_direction_input(struct gpio_chip *chip, unsigned offset) ++{ ++ struct mtk_gc *rg = to_mediatek_gpio(chip); ++ unsigned long flags; ++ u32 t; ++ ++ spin_lock_irqsave(&rg->lock, flags); ++ t = mtk_gpio_r32(rg, GPIO_REG_CTRL); ++ t &= ~BIT(offset); ++ mtk_gpio_w32(rg, GPIO_REG_CTRL, t); ++ spin_unlock_irqrestore(&rg->lock, flags); ++ ++ return 0; ++} ++ ++static int ++mediatek_gpio_direction_output(struct gpio_chip *chip, ++ unsigned offset, int value) ++{ ++ struct mtk_gc *rg = to_mediatek_gpio(chip); ++ unsigned long flags; ++ u32 t; ++ ++ spin_lock_irqsave(&rg->lock, flags); ++ t = mtk_gpio_r32(rg, GPIO_REG_CTRL); ++ t |= BIT(offset); ++ mtk_gpio_w32(rg, GPIO_REG_CTRL, t); ++ mediatek_gpio_set(chip, offset, value); ++ spin_unlock_irqrestore(&rg->lock, flags); ++ ++ return 0; ++} ++ ++static int ++mediatek_gpio_bank_probe(struct platform_device *pdev, struct device_node *bank) ++{ ++ const __be32 *id = of_get_property(bank, "reg", NULL); ++ struct mtk_gc *rg = devm_kzalloc(&pdev->dev, ++ sizeof(struct mtk_gc), GFP_KERNEL); ++ if (!rg || !id) ++ return -ENOMEM; ++ ++ spin_lock_init(&rg->lock); ++ ++ rg->chip.dev = &pdev->dev; ++ rg->chip.label = dev_name(&pdev->dev); ++ rg->chip.of_node = bank; ++ rg->chip.base = MTK_BANK_WIDTH * be32_to_cpu(*id); ++ rg->chip.ngpio = MTK_BANK_WIDTH; ++ rg->chip.direction_input = mediatek_gpio_direction_input; ++ rg->chip.direction_output = mediatek_gpio_direction_output; ++ rg->chip.get = mediatek_gpio_get; ++ rg->chip.set = mediatek_gpio_set; ++ ++ /* set polarity to low for all gpios */ ++ mtk_gpio_w32(rg, GPIO_REG_POL, 0); ++ ++ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio); ++ ++ return gpiochip_add(&rg->chip); ++} ++ ++static int ++mediatek_gpio_probe(struct platform_device *pdev) ++{ ++ struct device_node *bank, *np = pdev->dev.of_node; ++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ++ mtk_gc_membase = devm_request_and_ioremap(&pdev->dev, res); ++ if (IS_ERR(mtk_gc_membase)) ++ return PTR_ERR(mtk_gc_membase); ++ ++ for_each_child_of_node(np, bank) ++ if (of_device_is_compatible(bank, "mtk,mt7621-gpio-bank")) ++ mediatek_gpio_bank_probe(pdev, bank); ++ ++ return 0; ++} ++ ++static const struct of_device_id mediatek_gpio_match[] = { ++ { .compatible = "mtk,mt7621-gpio" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, mediatek_gpio_match); ++ ++static struct platform_driver mediatek_gpio_driver = { ++ .probe = mediatek_gpio_probe, ++ .driver = { ++ .name = "mt7621_gpio", ++ .owner = THIS_MODULE, ++ .of_match_table = mediatek_gpio_match, ++ }, ++}; ++ ++static int __init ++mediatek_gpio_init(void) ++{ ++ return platform_driver_register(&mediatek_gpio_driver); ++} ++ ++subsys_initcall(mediatek_gpio_init); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0049-DT-Add-documentation-for-spi-rt2880.patch b/target/linux/ramips/patches-3.14/0049-DT-Add-documentation-for-spi-rt2880.patch new file mode 100644 index 0000000000..902334e0fa --- /dev/null +++ b/target/linux/ramips/patches-3.14/0049-DT-Add-documentation-for-spi-rt2880.patch @@ -0,0 +1,50 @@ +From 6ed8d03e5f4283b60dffea5c10ff1484141824e7 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Fri, 9 Aug 2013 20:12:59 +0200 +Subject: [PATCH 49/57] DT: Add documentation for spi-rt2880 + +Describe the SPI master found on the MIPS based Ralink RT2880 SoC. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + .../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++ + 1 file changed, 28 insertions(+) + create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt + +diff --git a/Documentation/devicetree/bindings/spi/spi-rt2880.txt b/Documentation/devicetree/bindings/spi/spi-rt2880.txt +new file mode 100644 +index 0000000..068bc90 +--- /dev/null ++++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt +@@ -0,0 +1,28 @@ ++Ralink SoC RT2880 SPI master controller. ++ ++This SPI controller is found on most wireless SoCs made by ralink. ++ ++Required properties: ++- compatible : "ralink,rt2880-spi" ++- reg : The register base for the controller. ++- #address-cells : <1>, as required by generic SPI binding. ++- #size-cells : <0>, also as required by generic SPI binding. ++ ++Child nodes as per the generic SPI binding. ++ ++Example: ++ ++ spi@b00 { ++ compatible = "ralink,rt2880-spi"; ++ reg = <0xb00 0x100>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ m25p80@0 { ++ compatible = "m25p80"; ++ reg = <0>; ++ spi-max-frequency = <10000000>; ++ }; ++ }; ++ +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-3.14/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch new file mode 100644 index 0000000000..f446689948 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch @@ -0,0 +1,486 @@ +From fc006d0622ab8c43086b2c9018c03012db332033 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 11:15:12 +0100 +Subject: [PATCH 50/57] SPI: ralink: add Ralink SoC spi driver + +Add the driver needed to make SPI work on Ralink SoC. + +Signed-off-by: Gabor Juhos <juhosg@openwrt.org> +Acked-by: John Crispin <blogic@openwrt.org> +--- + drivers/spi/Kconfig | 6 + + drivers/spi/Makefile | 1 + + drivers/spi/spi-rt2880.c | 432 ++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 439 insertions(+) + create mode 100644 drivers/spi/spi-rt2880.c + +diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig +index 581ee2a..009f8f3 100644 +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -381,6 +381,12 @@ config SPI_RSPI + help + SPI driver for Renesas RSPI and QSPI blocks. + ++config SPI_RT2880 ++ tristate "Ralink RT288x SPI Controller" ++ depends on RALINK ++ help ++ This selects a driver for the Ralink RT288x/RT305x SPI Controller. ++ + config SPI_S3C24XX + tristate "Samsung S3C24XX series SPI" + depends on ARCH_S3C24XX +diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile +index 95af48d..1f647e5 100644 +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -60,6 +60,7 @@ spi-pxa2xx-platform-$(CONFIG_SPI_PXA2XX_DMA) += spi-pxa2xx-dma.o + obj-$(CONFIG_SPI_PXA2XX) += spi-pxa2xx-platform.o + obj-$(CONFIG_SPI_PXA2XX_PCI) += spi-pxa2xx-pci.o + obj-$(CONFIG_SPI_RSPI) += spi-rspi.o ++obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o + obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o + spi-s3c24xx-hw-y := spi-s3c24xx.o + spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o +diff --git a/drivers/spi/spi-rt2880.c b/drivers/spi/spi-rt2880.c +new file mode 100644 +index 0000000..ac9de67 +--- /dev/null ++++ b/drivers/spi/spi-rt2880.c +@@ -0,0 +1,432 @@ ++/* ++ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver ++ * ++ * Copyright (C) 2011 Sergiy <piratfm@gmail.com> ++ * Copyright (C) 2011-2013 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * Some parts are based on spi-orion.c: ++ * Author: Shadi Ammouri <shadi@marvell.com> ++ * Copyright (C) 2007-2008 Marvell Ltd. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/clk.h> ++#include <linux/err.h> ++#include <linux/delay.h> ++#include <linux/io.h> ++#include <linux/reset.h> ++#include <linux/spi/spi.h> ++#include <linux/platform_device.h> ++ ++#define DRIVER_NAME "spi-rt2880" ++/* only one slave is supported*/ ++#define RALINK_NUM_CHIPSELECTS 1 ++/* in usec */ ++#define RALINK_SPI_WAIT_MAX_LOOP 2000 ++ ++#define RAMIPS_SPI_STAT 0x00 ++#define RAMIPS_SPI_CFG 0x10 ++#define RAMIPS_SPI_CTL 0x14 ++#define RAMIPS_SPI_DATA 0x20 ++#define RAMIPS_SPI_FIFO_STAT 0x38 ++ ++/* SPISTAT register bit field */ ++#define SPISTAT_BUSY BIT(0) ++ ++/* SPICFG register bit field */ ++#define SPICFG_LSBFIRST 0 ++#define SPICFG_MSBFIRST BIT(8) ++#define SPICFG_SPICLKPOL BIT(6) ++#define SPICFG_RXCLKEDGE_FALLING BIT(5) ++#define SPICFG_TXCLKEDGE_FALLING BIT(4) ++#define SPICFG_SPICLK_PRESCALE_MASK 0x7 ++#define SPICFG_SPICLK_DIV2 0 ++#define SPICFG_SPICLK_DIV4 1 ++#define SPICFG_SPICLK_DIV8 2 ++#define SPICFG_SPICLK_DIV16 3 ++#define SPICFG_SPICLK_DIV32 4 ++#define SPICFG_SPICLK_DIV64 5 ++#define SPICFG_SPICLK_DIV128 6 ++#define SPICFG_SPICLK_DISABLE 7 ++ ++/* SPICTL register bit field */ ++#define SPICTL_HIZSDO BIT(3) ++#define SPICTL_STARTWR BIT(2) ++#define SPICTL_STARTRD BIT(1) ++#define SPICTL_SPIENA BIT(0) ++ ++/* SPIFIFOSTAT register bit field */ ++#define SPIFIFOSTAT_TXFULL BIT(17) ++ ++struct rt2880_spi { ++ struct spi_master *master; ++ void __iomem *base; ++ unsigned int sys_freq; ++ unsigned int speed; ++ struct clk *clk; ++ spinlock_t lock; ++}; ++ ++static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi) ++{ ++ return spi_master_get_devdata(spi->master); ++} ++ ++static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg) ++{ ++ return ioread32(rs->base + reg); ++} ++ ++static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg, u32 val) ++{ ++ iowrite32(val, rs->base + reg); ++} ++ ++static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask) ++{ ++ void __iomem *addr = rs->base + reg; ++ unsigned long flags; ++ u32 val; ++ ++ spin_lock_irqsave(&rs->lock, flags); ++ val = ioread32(addr); ++ val |= mask; ++ iowrite32(val, addr); ++ spin_unlock_irqrestore(&rs->lock, flags); ++} ++ ++static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask) ++{ ++ void __iomem *addr = rs->base + reg; ++ unsigned long flags; ++ u32 val; ++ ++ spin_lock_irqsave(&rs->lock, flags); ++ val = ioread32(addr); ++ val &= ~mask; ++ iowrite32(val, addr); ++ spin_unlock_irqrestore(&rs->lock, flags); ++} ++ ++static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed) ++{ ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ u32 rate; ++ u32 prescale; ++ u32 reg; ++ ++ dev_dbg(&spi->dev, "speed:%u\n", speed); ++ ++ /* ++ * the supported rates are: 2, 4, 8, ... 128 ++ * round up as we look for equal or less speed ++ */ ++ rate = DIV_ROUND_UP(rs->sys_freq, speed); ++ dev_dbg(&spi->dev, "rate-1:%u\n", rate); ++ rate = roundup_pow_of_two(rate); ++ dev_dbg(&spi->dev, "rate-2:%u\n", rate); ++ ++ /* check if requested speed is too small */ ++ if (rate > 128) ++ return -EINVAL; ++ ++ if (rate < 2) ++ rate = 2; ++ ++ /* Convert the rate to SPI clock divisor value. */ ++ prescale = ilog2(rate / 2); ++ dev_dbg(&spi->dev, "prescale:%u\n", prescale); ++ ++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG); ++ reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale); ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg); ++ rs->speed = speed; ++ return 0; ++} ++ ++/* ++ * called only when no transfer is active on the bus ++ */ ++static int ++rt2880_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) ++{ ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ unsigned int speed = spi->max_speed_hz; ++ int rc; ++ ++ if ((t != NULL) && t->speed_hz) ++ speed = t->speed_hz; ++ ++ if (rs->speed != speed) { ++ dev_dbg(&spi->dev, "speed_hz:%u\n", speed); ++ rc = rt2880_spi_baudrate_set(spi, speed); ++ if (rc) ++ return rc; ++ } ++ ++ return 0; ++} ++ ++static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable) ++{ ++ if (enable) ++ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); ++ else ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); ++} ++ ++static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs) ++{ ++ int i; ++ ++ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) { ++ u32 status; ++ ++ status = rt2880_spi_read(rs, RAMIPS_SPI_STAT); ++ if ((status & SPISTAT_BUSY) == 0) ++ return 0; ++ ++ cpu_relax(); ++ udelay(1); ++ } ++ ++ return -ETIMEDOUT; ++} ++ ++static unsigned int ++rt2880_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) ++{ ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ unsigned count = 0; ++ u8 *rx = xfer->rx_buf; ++ const u8 *tx = xfer->tx_buf; ++ int err; ++ ++ dev_dbg(&spi->dev, "read (%d): %s %s\n", xfer->len, ++ (tx != NULL) ? "tx" : " ", ++ (rx != NULL) ? "rx" : " "); ++ ++ if (tx) { ++ for (count = 0; count < xfer->len; count++) { ++ rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]); ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR); ++ err = rt2880_spi_wait_till_ready(rs); ++ if (err) { ++ dev_err(&spi->dev, "TX failed, err=%d\n", err); ++ goto out; ++ } ++ } ++ } ++ ++ if (rx) { ++ for (count = 0; count < xfer->len; count++) { ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD); ++ err = rt2880_spi_wait_till_ready(rs); ++ if (err) { ++ dev_err(&spi->dev, "RX failed, err=%d\n", err); ++ goto out; ++ } ++ rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA); ++ } ++ } ++ ++out: ++ return count; ++} ++ ++static int rt2880_spi_transfer_one_message(struct spi_master *master, ++ struct spi_message *m) ++{ ++ struct rt2880_spi *rs = spi_master_get_devdata(master); ++ struct spi_device *spi = m->spi; ++ struct spi_transfer *t = NULL; ++ int par_override = 0; ++ int status = 0; ++ int cs_active = 0; ++ ++ /* Load defaults */ ++ status = rt2880_spi_setup_transfer(spi, NULL); ++ if (status < 0) ++ goto msg_done; ++ ++ list_for_each_entry(t, &m->transfers, transfer_list) { ++ if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) { ++ dev_err(&spi->dev, ++ "message rejected: invalid transfer data buffers\n"); ++ status = -EIO; ++ goto msg_done; ++ } ++ ++ if (t->speed_hz && t->speed_hz < (rs->sys_freq / 128)) { ++ dev_err(&spi->dev, ++ "message rejected: device min speed (%d Hz) exceeds required transfer speed (%d Hz)\n", ++ (rs->sys_freq / 128), t->speed_hz); ++ status = -EIO; ++ goto msg_done; ++ } ++ ++ if (par_override || t->speed_hz || t->bits_per_word) { ++ par_override = 1; ++ status = rt2880_spi_setup_transfer(spi, t); ++ if (status < 0) ++ goto msg_done; ++ if (!t->speed_hz && !t->bits_per_word) ++ par_override = 0; ++ } ++ ++ if (!cs_active) { ++ rt2880_spi_set_cs(rs, 1); ++ cs_active = 1; ++ } ++ ++ if (t->len) ++ m->actual_length += rt2880_spi_write_read(spi, t); ++ ++ if (t->delay_usecs) ++ udelay(t->delay_usecs); ++ ++ if (t->cs_change) { ++ rt2880_spi_set_cs(rs, 0); ++ cs_active = 0; ++ } ++ } ++ ++msg_done: ++ if (cs_active) ++ rt2880_spi_set_cs(rs, 0); ++ ++ m->status = status; ++ spi_finalize_current_message(master); ++ ++ return 0; ++} ++ ++static int rt2880_spi_setup(struct spi_device *spi) ++{ ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ ++ if ((spi->max_speed_hz == 0) || ++ (spi->max_speed_hz > (rs->sys_freq / 2))) ++ spi->max_speed_hz = (rs->sys_freq / 2); ++ ++ if (spi->max_speed_hz < (rs->sys_freq / 128)) { ++ dev_err(&spi->dev, "setup: requested speed is too low %d Hz\n", ++ spi->max_speed_hz); ++ return -EINVAL; ++ } ++ ++ /* ++ * baudrate & width will be set rt2880_spi_setup_transfer ++ */ ++ return 0; ++} ++ ++static void rt2880_spi_reset(struct rt2880_spi *rs) ++{ ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, ++ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING | ++ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL); ++ rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA); ++} ++ ++static int rt2880_spi_probe(struct platform_device *pdev) ++{ ++ struct spi_master *master; ++ struct rt2880_spi *rs; ++ unsigned long flags; ++ void __iomem *base; ++ struct resource *r; ++ int status = 0; ++ struct clk *clk; ++ ++ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ base = devm_ioremap_resource(&pdev->dev, r); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++ clk = devm_clk_get(&pdev->dev, NULL); ++ if (IS_ERR(clk)) { ++ dev_err(&pdev->dev, "unable to get SYS clock, err=%d\n", ++ status); ++ return PTR_ERR(clk); ++ } ++ ++ status = clk_prepare_enable(clk); ++ if (status) ++ return status; ++ ++ master = spi_alloc_master(&pdev->dev, sizeof(*rs)); ++ if (master == NULL) { ++ dev_dbg(&pdev->dev, "master allocation failed\n"); ++ return -ENOMEM; ++ } ++ ++ /* we support only mode 0, and no options */ ++ master->mode_bits = 0; ++ ++ master->setup = rt2880_spi_setup; ++ master->transfer_one_message = rt2880_spi_transfer_one_message; ++ master->num_chipselect = RALINK_NUM_CHIPSELECTS; ++ master->bits_per_word_mask = SPI_BPW_MASK(8); ++ master->dev.of_node = pdev->dev.of_node; ++ ++ dev_set_drvdata(&pdev->dev, master); ++ ++ rs = spi_master_get_devdata(master); ++ rs->base = base; ++ rs->clk = clk; ++ rs->master = master; ++ rs->sys_freq = clk_get_rate(rs->clk); ++ dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq); ++ spin_lock_irqsave(&rs->lock, flags); ++ ++ device_reset(&pdev->dev); ++ ++ rt2880_spi_reset(rs); ++ ++ return spi_register_master(master); ++} ++ ++static int rt2880_spi_remove(struct platform_device *pdev) ++{ ++ struct spi_master *master; ++ struct rt2880_spi *rs; ++ ++ master = dev_get_drvdata(&pdev->dev); ++ rs = spi_master_get_devdata(master); ++ ++ clk_disable(rs->clk); ++ spi_unregister_master(master); ++ ++ return 0; ++} ++ ++MODULE_ALIAS("platform:" DRIVER_NAME); ++ ++static const struct of_device_id rt2880_spi_match[] = { ++ { .compatible = "ralink,rt2880-spi" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, rt2880_spi_match); ++ ++static struct platform_driver rt2880_spi_driver = { ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = rt2880_spi_match, ++ }, ++ .probe = rt2880_spi_probe, ++ .remove = rt2880_spi_remove, ++}; ++ ++module_platform_driver(rt2880_spi_driver); ++ ++MODULE_DESCRIPTION("Ralink SPI driver"); ++MODULE_AUTHOR("Sergiy <piratfm@gmail.com>"); ++MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>"); ++MODULE_LICENSE("GPL"); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0051-SPI-MIPS-ralink-add-mt7621-support.patch b/target/linux/ramips/patches-3.14/0051-SPI-MIPS-ralink-add-mt7621-support.patch new file mode 100644 index 0000000000..2c5a9c5e76 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0051-SPI-MIPS-ralink-add-mt7621-support.patch @@ -0,0 +1,351 @@ +From 27b11d4f1888e1a3d6d75b46d4d5a4d86fc03891 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Wed, 6 Aug 2014 10:53:40 +0200 +Subject: [PATCH 51/57] SPI: MIPS: ralink: add mt7621 support + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/spi/spi-rt2880.c | 218 +++++++++++++++++++++++++++++++++++++++++++--- + 1 file changed, 205 insertions(+), 13 deletions(-) + +diff --git a/drivers/spi/spi-rt2880.c b/drivers/spi/spi-rt2880.c +index ac9de67..1c6b72d 100644 +--- a/drivers/spi/spi-rt2880.c ++++ b/drivers/spi/spi-rt2880.c +@@ -21,8 +21,13 @@ + #include <linux/io.h> + #include <linux/reset.h> + #include <linux/spi/spi.h> ++#include <linux/of_device.h> + #include <linux/platform_device.h> + ++#include <ralink_regs.h> ++ ++#define SPI_BPW_MASK(bits) BIT((bits) - 1) ++ + #define DRIVER_NAME "spi-rt2880" + /* only one slave is supported*/ + #define RALINK_NUM_CHIPSELECTS 1 +@@ -63,6 +68,25 @@ + /* SPIFIFOSTAT register bit field */ + #define SPIFIFOSTAT_TXFULL BIT(17) + ++#define MT7621_SPI_TRANS 0x00 ++#define SPITRANS_BUSY BIT(16) ++#define MT7621_SPI_OPCODE 0x04 ++#define MT7621_SPI_DATA0 0x08 ++#define SPI_CTL_TX_RX_CNT_MASK 0xff ++#define SPI_CTL_START BIT(8) ++#define MT7621_SPI_POLAR 0x38 ++#define MT7621_SPI_MASTER 0x28 ++#define MT7621_SPI_SPACE 0x3c ++ ++struct rt2880_spi; ++ ++struct rt2880_spi_ops { ++ void (*init_hw)(struct rt2880_spi *rs); ++ void (*set_cs)(struct rt2880_spi *rs, int enable); ++ int (*baudrate_set)(struct spi_device *spi, unsigned int speed); ++ unsigned int (*write_read)(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer); ++}; ++ + struct rt2880_spi { + struct spi_master *master; + void __iomem *base; +@@ -70,6 +94,8 @@ struct rt2880_spi { + unsigned int speed; + struct clk *clk; + spinlock_t lock; ++ ++ struct rt2880_spi_ops *ops; + }; + + static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi) +@@ -149,6 +175,17 @@ static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed) + return 0; + } + ++static int mt7621_spi_baudrate_set(struct spi_device *spi, unsigned int speed) ++{ ++/* u32 master = rt2880_spi_read(rs, MT7621_SPI_MASTER); ++ ++ // set default clock to hclk/5 ++ master &= ~(0xfff << 16); ++ master |= 0x3 << 16; ++*/ ++ return 0; ++} ++ + /* + * called only when no transfer is active on the bus + */ +@@ -164,7 +201,7 @@ rt2880_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t) + + if (rs->speed != speed) { + dev_dbg(&spi->dev, "speed_hz:%u\n", speed); +- rc = rt2880_spi_baudrate_set(spi, speed); ++ rc = rs->ops->baudrate_set(spi, speed); + if (rc) + return rc; + } +@@ -180,6 +217,17 @@ static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable) + rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); + } + ++static void mt7621_spi_set_cs(struct rt2880_spi *rs, int enable) ++{ ++ u32 polar = rt2880_spi_read(rs, MT7621_SPI_POLAR); ++ ++ if (enable) ++ polar |= 1; ++ else ++ polar &= ~1; ++ rt2880_spi_write(rs, MT7621_SPI_POLAR, polar); ++} ++ + static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs) + { + int i; +@@ -198,8 +246,26 @@ static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs) + return -ETIMEDOUT; + } + ++static inline int mt7621_spi_wait_till_ready(struct rt2880_spi *rs) ++{ ++ int i; ++ ++ for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) { ++ u32 status; ++ ++ status = rt2880_spi_read(rs, MT7621_SPI_TRANS); ++ if ((status & SPITRANS_BUSY) == 0) { ++ return 0; ++ } ++ cpu_relax(); ++ udelay(1); ++ } ++ ++ return -ETIMEDOUT; ++} ++ + static unsigned int +-rt2880_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer) ++rt2880_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer) + { + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + unsigned count = 0; +@@ -239,6 +305,100 @@ out: + return count; + } + ++static unsigned int ++mt7621_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer) ++{ ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ struct spi_transfer *next = NULL; ++ const u8 *tx = xfer->tx_buf; ++ u8 *rx = NULL; ++ u32 trans; ++ int len = xfer->len; ++ ++ if (!tx) ++ return 0; ++ ++ if (!list_is_last(&xfer->transfer_list, list)) { ++ next = list_entry(xfer->transfer_list.next, struct spi_transfer, transfer_list); ++ rx = next->rx_buf; ++ } ++ ++ trans = rt2880_spi_read(rs, MT7621_SPI_TRANS); ++ trans &= ~SPI_CTL_TX_RX_CNT_MASK; ++ ++ if (tx) { ++ u32 data0 = 0, opcode = 0; ++ ++ switch (xfer->len) { ++ case 8: ++ data0 |= tx[7] << 24; ++ case 7: ++ data0 |= tx[6] << 16; ++ case 6: ++ data0 |= tx[5] << 8; ++ case 5: ++ data0 |= tx[4]; ++ case 4: ++ opcode |= tx[3] << 8; ++ case 3: ++ opcode |= tx[2] << 16; ++ case 2: ++ opcode |= tx[1] << 24; ++ case 1: ++ opcode |= tx[0]; ++ break; ++ ++ default: ++ dev_err(&spi->dev, "trying to write too many bytes: %d\n", next->len); ++ return -EINVAL; ++ } ++ ++ rt2880_spi_write(rs, MT7621_SPI_DATA0, data0); ++ rt2880_spi_write(rs, MT7621_SPI_OPCODE, opcode); ++ trans |= xfer->len; ++ } ++ ++ if (rx) ++ trans |= (next->len << 4); ++ rt2880_spi_write(rs, MT7621_SPI_TRANS, trans); ++ trans |= SPI_CTL_START; ++ rt2880_spi_write(rs, MT7621_SPI_TRANS, trans); ++ ++ mt7621_spi_wait_till_ready(rs); ++ ++ if (rx) { ++ u32 data0 = rt2880_spi_read(rs, MT7621_SPI_DATA0); ++ u32 opcode = rt2880_spi_read(rs, MT7621_SPI_OPCODE); ++ ++ switch (next->len) { ++ case 8: ++ rx[7] = (opcode >> 24) & 0xff; ++ case 7: ++ rx[6] = (opcode >> 16) & 0xff; ++ case 6: ++ rx[5] = (opcode >> 8) & 0xff; ++ case 5: ++ rx[4] = opcode & 0xff; ++ case 4: ++ rx[3] = (data0 >> 24) & 0xff; ++ case 3: ++ rx[2] = (data0 >> 16) & 0xff; ++ case 2: ++ rx[1] = (data0 >> 8) & 0xff; ++ case 1: ++ rx[0] = data0 & 0xff; ++ break; ++ ++ default: ++ dev_err(&spi->dev, "trying to read too many bytes: %d\n", next->len); ++ return -EINVAL; ++ } ++ len += next->len; ++ } ++ ++ return len; ++} ++ + static int rt2880_spi_transfer_one_message(struct spi_master *master, + struct spi_message *m) + { +@@ -280,25 +440,25 @@ static int rt2880_spi_transfer_one_message(struct spi_master *master, + } + + if (!cs_active) { +- rt2880_spi_set_cs(rs, 1); ++ rs->ops->set_cs(rs, 1); + cs_active = 1; + } + + if (t->len) +- m->actual_length += rt2880_spi_write_read(spi, t); ++ m->actual_length += rs->ops->write_read(spi, &m->transfers, t); + + if (t->delay_usecs) + udelay(t->delay_usecs); + + if (t->cs_change) { +- rt2880_spi_set_cs(rs, 0); ++ rs->ops->set_cs(rs, 0); + cs_active = 0; + } + } + + msg_done: + if (cs_active) +- rt2880_spi_set_cs(rs, 0); ++ rs->ops->set_cs(rs, 0); + + m->status = status; + spi_finalize_current_message(master); +@@ -334,8 +494,41 @@ static void rt2880_spi_reset(struct rt2880_spi *rs) + rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA); + } + ++static void mt7621_spi_reset(struct rt2880_spi *rs) ++{ ++ u32 master = rt2880_spi_read(rs, MT7621_SPI_MASTER); ++ ++ master &= ~(0xfff << 16); ++ master |= 3 << 16; ++ ++ master |= 7 << 29; ++ rt2880_spi_write(rs, MT7621_SPI_MASTER, master); ++} ++ ++static struct rt2880_spi_ops spi_ops[] = { ++ { ++ .init_hw = rt2880_spi_reset, ++ .set_cs = rt2880_spi_set_cs, ++ .baudrate_set = rt2880_spi_baudrate_set, ++ .write_read = rt2880_spi_write_read, ++ }, { ++ .init_hw = mt7621_spi_reset, ++ .set_cs = mt7621_spi_set_cs, ++ .baudrate_set = mt7621_spi_baudrate_set, ++ .write_read = mt7621_spi_write_read, ++ }, ++}; ++ ++static const struct of_device_id rt2880_spi_match[] = { ++ { .compatible = "ralink,rt2880-spi", .data = &spi_ops[0]}, ++ { .compatible = "ralink,mt7621-spi", .data = &spi_ops[1] }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, rt2880_spi_match); ++ + static int rt2880_spi_probe(struct platform_device *pdev) + { ++ const struct of_device_id *match; + struct spi_master *master; + struct rt2880_spi *rs; + unsigned long flags; +@@ -344,6 +537,10 @@ static int rt2880_spi_probe(struct platform_device *pdev) + int status = 0; + struct clk *clk; + ++ match = of_match_device(rt2880_spi_match, &pdev->dev); ++ if (!match) ++ return -EINVAL; ++ + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, r); + if (IS_ERR(base)) +@@ -382,12 +579,13 @@ static int rt2880_spi_probe(struct platform_device *pdev) + rs->clk = clk; + rs->master = master; + rs->sys_freq = clk_get_rate(rs->clk); ++ rs->ops = (struct rt2880_spi_ops *) match->data; + dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq); + spin_lock_irqsave(&rs->lock, flags); + + device_reset(&pdev->dev); + +- rt2880_spi_reset(rs); ++ rs->ops->init_hw(rs); + + return spi_register_master(master); + } +@@ -408,12 +606,6 @@ static int rt2880_spi_remove(struct platform_device *pdev) + + MODULE_ALIAS("platform:" DRIVER_NAME); + +-static const struct of_device_id rt2880_spi_match[] = { +- { .compatible = "ralink,rt2880-spi" }, +- {}, +-}; +-MODULE_DEVICE_TABLE(of, rt2880_spi_match); +- + static struct platform_driver rt2880_spi_driver = { + .driver = { + .name = DRIVER_NAME, +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0052-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-3.14/0052-i2c-MIPS-adds-ralink-I2C-driver.patch new file mode 100644 index 0000000000..b03a5f0935 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0052-i2c-MIPS-adds-ralink-I2C-driver.patch @@ -0,0 +1,358 @@ +From 225f36695bb07dad9510f9affd79e63f1a44a195 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:52:56 +0100 +Subject: [PATCH 52/57] i2c: MIPS: adds ralink I2C driver + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++ + drivers/i2c/busses/Kconfig | 4 + + drivers/i2c/busses/Makefile | 1 + + drivers/i2c/busses/i2c-ralink.c | 274 ++++++++++++++++++++ + 4 files changed, 306 insertions(+) + create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt + create mode 100644 drivers/i2c/busses/i2c-ralink.c + +diff --git a/Documentation/devicetree/bindings/i2c/i2c-ralink.txt b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt +new file mode 100644 +index 0000000..8fa8ac3 +--- /dev/null ++++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt +@@ -0,0 +1,27 @@ ++I2C for Ralink platforms ++ ++Required properties : ++- compatible : Must be "link,rt3052-i2c" ++- reg: physical base address of the controller and length of memory mapped ++ region. ++- #address-cells = <1>; ++- #size-cells = <0>; ++ ++Optional properties: ++- Child nodes conforming to i2c bus binding ++ ++Example : ++ ++palmbus@10000000 { ++ i2c@900 { ++ compatible = "link,rt3052-i2c"; ++ reg = <0x900 0x100>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ hwmon@4b { ++ compatible = "national,lm92"; ++ reg = <0x4b>; ++ }; ++ }; ++}; +diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig +index de17c55..d773b72 100644 +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -658,6 +658,10 @@ config I2C_RIIC + This driver can also be built as a module. If so, the module + will be called i2c-riic. + ++config I2C_RALINK ++ tristate "Ralink I2C Controller" ++ select OF_I2C ++ + config HAVE_S3C2410_I2C + bool + help +diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile +index a08931f..9682895 100644 +--- a/drivers/i2c/busses/Makefile ++++ b/drivers/i2c/busses/Makefile +@@ -63,6 +63,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o + obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o + obj-$(CONFIG_I2C_PXA) += i2c-pxa.o + obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o ++obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o + obj-$(CONFIG_I2C_RIIC) += i2c-riic.o + obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o + obj-$(CONFIG_I2C_S6000) += i2c-s6000.o +diff --git a/drivers/i2c/busses/i2c-ralink.c b/drivers/i2c/busses/i2c-ralink.c +new file mode 100644 +index 0000000..f4dc13d +--- /dev/null ++++ b/drivers/i2c/busses/i2c-ralink.c +@@ -0,0 +1,274 @@ ++/* ++ * drivers/i2c/busses/i2c-ralink.c ++ * ++ * Copyright (C) 2013 Steven Liu <steven_liu@mediatek.com> ++ * ++ * This software is licensed under the terms of the GNU General Public ++ * License version 2, as published by the Free Software Foundation, and ++ * may be copied, distributed, and modified under those terms. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ */ ++ ++#include <linux/interrupt.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/reset.h> ++#include <linux/delay.h> ++#include <linux/slab.h> ++#include <linux/init.h> ++#include <linux/errno.h> ++#include <linux/platform_device.h> ++#include <linux/i2c.h> ++#include <linux/io.h> ++#include <linux/of_i2c.h> ++#include <linux/err.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++ ++#define REG_CONFIG_REG 0x00 ++#define REG_CLKDIV_REG 0x04 ++#define REG_DEVADDR_REG 0x08 ++#define REG_ADDR_REG 0x0C ++#define REG_DATAOUT_REG 0x10 ++#define REG_DATAIN_REG 0x14 ++#define REG_STATUS_REG 0x18 ++#define REG_STARTXFR_REG 0x1C ++#define REG_BYTECNT_REG 0x20 ++ ++#define I2C_STARTERR BIT(4) ++#define I2C_ACKERR BIT(3) ++#define I2C_DATARDY BIT(2) ++#define I2C_SDOEMPTY BIT(1) ++#define I2C_BUSY BIT(0) ++ ++#define I2C_DEVADLEN_7 (6 << 2) ++#define I2C_ADDRDIS BIT(1) ++ ++#define I2C_RETRY 0x400 ++ ++#define CLKDIV_VALUE 200 // clock rate is 40M, 40M / (200*2) = 100k (standard i2c bus rate). ++//#define CLKDIV_VALUE 50 // clock rate is 40M, 40M / (50*2) = 400k (fast i2c bus rate). ++ ++#define READ_CMD 0x01 ++#define WRITE_CMD 0x00 ++#define READ_BLOCK 64 ++ ++static void __iomem *membase; ++static struct i2c_adapter *adapter; ++ ++static void rt_i2c_w32(u32 val, unsigned reg) ++{ ++ iowrite32(val, membase + reg); ++} ++ ++static u32 rt_i2c_r32(unsigned reg) ++{ ++ return ioread32(membase + reg); ++} ++ ++static inline int rt_i2c_wait_rx_done(void) ++{ ++ int retries = I2C_RETRY; ++ ++ do { ++ if (!retries--) ++ break; ++ } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_DATARDY)); ++ ++ return (retries < 0); ++} ++ ++static inline int rt_i2c_wait_idle(void) ++{ ++ int retries = I2C_RETRY; ++ ++ do { ++ if (!retries--) ++ break; ++ } while(rt_i2c_r32(REG_STATUS_REG) & I2C_BUSY); ++ ++ return (retries < 0); ++} ++ ++static inline int rt_i2c_wait_tx_done(void) ++{ ++ int retries = I2C_RETRY; ++ ++ do { ++ if (!retries--) ++ break; ++ } while(!(rt_i2c_r32(REG_STATUS_REG) & I2C_SDOEMPTY)); ++ ++ return (retries < 0); ++} ++ ++static int rt_i2c_handle_msg(struct i2c_adapter *a, struct i2c_msg* msg) ++{ ++ int i = 0, j = 0, pos = 0; ++ int nblock = msg->len / READ_BLOCK; ++ int rem = msg->len % READ_BLOCK; ++ ++ if (msg->flags & I2C_M_TEN) { ++ printk("10 bits addr not supported\n"); ++ return -EINVAL; ++ } ++ ++ if (msg->flags & I2C_M_RD) { ++ for (i = 0; i < nblock; i++) { ++ rt_i2c_wait_idle(); ++ rt_i2c_w32(READ_BLOCK - 1, REG_BYTECNT_REG); ++ rt_i2c_w32(READ_CMD, REG_STARTXFR_REG); ++ for (j = 0; j < READ_BLOCK; j++) { ++ if (rt_i2c_wait_rx_done()) ++ return -1; ++ msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG); ++ } ++ } ++ ++ rt_i2c_wait_idle(); ++ rt_i2c_w32(rem - 1, REG_BYTECNT_REG); ++ rt_i2c_w32(READ_CMD, REG_STARTXFR_REG); ++ for (i = 0; i < rem; i++) { ++ if (rt_i2c_wait_rx_done()) ++ return -1; ++ msg->buf[pos++] = rt_i2c_r32(REG_DATAIN_REG); ++ } ++ } else { ++ rt_i2c_wait_idle(); ++ rt_i2c_w32(msg->len - 1, REG_BYTECNT_REG); ++ for (i = 0; i < msg->len; i++) { ++ rt_i2c_w32(msg->buf[i], REG_DATAOUT_REG); ++ rt_i2c_w32(WRITE_CMD, REG_STARTXFR_REG); ++ if (rt_i2c_wait_tx_done()) ++ return -1; ++ } ++ } ++ ++ return 0; ++} ++ ++static int rt_i2c_master_xfer(struct i2c_adapter *a, struct i2c_msg *m, int n) ++{ ++ int i = 0; ++ int ret = 0; ++ ++ if (rt_i2c_wait_idle()) { ++ printk("i2c transfer failed\n"); ++ return 0; ++ } ++ ++ device_reset(a->dev.parent); ++ ++ rt_i2c_w32(m->addr, REG_DEVADDR_REG); ++ rt_i2c_w32(I2C_DEVADLEN_7 | I2C_ADDRDIS, REG_CONFIG_REG); ++ rt_i2c_w32(CLKDIV_VALUE, REG_CLKDIV_REG); ++ ++ for (i = 0; i < n && !ret; i++) ++ ret = rt_i2c_handle_msg(a, &m[i]); ++ ++ if (ret) { ++ printk("i2c transfer failed\n"); ++ return 0; ++ } ++ ++ return n; ++} ++ ++static u32 rt_i2c_func(struct i2c_adapter *a) ++{ ++ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; ++} ++ ++static const struct i2c_algorithm rt_i2c_algo = { ++ .master_xfer = rt_i2c_master_xfer, ++ .functionality = rt_i2c_func, ++}; ++ ++static int rt_i2c_probe(struct platform_device *pdev) ++{ ++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ int ret; ++ ++ if (!res) { ++ dev_err(&pdev->dev, "no memory resource found\n"); ++ return -ENODEV; ++ } ++ ++ adapter = devm_kzalloc(&pdev->dev, sizeof(struct i2c_adapter), GFP_KERNEL); ++ if (!adapter) { ++ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n"); ++ return -ENOMEM; ++ } ++ ++ membase = devm_request_and_ioremap(&pdev->dev, res); ++ if (IS_ERR(membase)) ++ return PTR_ERR(membase); ++ ++ strlcpy(adapter->name, dev_name(&pdev->dev), sizeof(adapter->name)); ++ adapter->owner = THIS_MODULE; ++ adapter->nr = pdev->id; ++ adapter->timeout = HZ; ++ adapter->algo = &rt_i2c_algo; ++ adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; ++ adapter->dev.parent = &pdev->dev; ++ adapter->dev.of_node = pdev->dev.of_node; ++ ++ ret = i2c_add_numbered_adapter(adapter); ++ if (ret) ++ return ret; ++ ++ of_i2c_register_devices(adapter); ++ ++ platform_set_drvdata(pdev, adapter); ++ ++ dev_info(&pdev->dev, "loaded\n"); ++ ++ return 0; ++} ++ ++static int rt_i2c_remove(struct platform_device *pdev) ++{ ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++ ++static const struct of_device_id i2c_rt_dt_ids[] = { ++ { .compatible = "ralink,rt2880-i2c", }, ++ { /* sentinel */ } ++}; ++ ++MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids); ++ ++static struct platform_driver rt_i2c_driver = { ++ .probe = rt_i2c_probe, ++ .remove = rt_i2c_remove, ++ .driver = { ++ .owner = THIS_MODULE, ++ .name = "i2c-ralink", ++ .of_match_table = i2c_rt_dt_ids, ++ }, ++}; ++ ++static int __init i2c_rt_init (void) ++{ ++ return platform_driver_register(&rt_i2c_driver); ++} ++subsys_initcall(i2c_rt_init); ++ ++static void __exit i2c_rt_exit (void) ++{ ++ platform_driver_unregister(&rt_i2c_driver); ++} ++ ++module_exit (i2c_rt_exit); ++ ++MODULE_AUTHOR("Steven Liu <steven_liu@mediatek.com>"); ++MODULE_DESCRIPTION("Ralink I2c host driver"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:Ralink-I2C"); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-3.14/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch new file mode 100644 index 0000000000..8470dde873 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0053-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch @@ -0,0 +1,3446 @@ +From 0bfcde91fbb0a11bfe9ec61916285ffc4d2b7711 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:55:05 +0100 +Subject: [PATCH 53/57] mmc: MIPS: ralink: add sdhci for mt7620a SoC + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/mmc/host/Kconfig | 11 + + drivers/mmc/host/Makefile | 1 + + drivers/mmc/host/mt6575_sd.h | 1068 ++++++++++++++++++ + drivers/mmc/host/sdhci-mt7620.c | 2314 +++++++++++++++++++++++++++++++++++++++ + 4 files changed, 3394 insertions(+) + create mode 100644 drivers/mmc/host/mt6575_sd.h + create mode 100644 drivers/mmc/host/sdhci-mt7620.c + +diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig +index 1384f67..09a14cb 100644 +--- a/drivers/mmc/host/Kconfig ++++ b/drivers/mmc/host/Kconfig +@@ -283,6 +283,17 @@ config MMC_SDHCI_BCM2835 + + If unsure, say N. + ++config MMC_SDHCI_MT7620 ++ tristate "SDHCI platform support for the MT7620 SD/MMC Controller" ++ depends on SOC_MT7620 ++ depends on MMC_SDHCI_PLTFM ++ select MMC_SDHCI_IO_ACCESSORS ++ help ++ This selects the BCM2835 SD/MMC controller. If you have a BCM2835 ++ platform with SD or MMC devices, say Y or M here. ++ ++ If unsure, say N. ++ + config MMC_OMAP + tristate "TI OMAP Multimedia Card Interface support" + depends on ARCH_OMAP +diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile +index 3483b6b..430824f 100644 +--- a/drivers/mmc/host/Makefile ++++ b/drivers/mmc/host/Makefile +@@ -64,6 +64,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_ESDHC) += sdhci-of-esdhc.o + obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o + obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o + obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o ++obj-$(CONFIG_MMC_SDHCI_MT7620) += sdhci-mt7620.o + + ifeq ($(CONFIG_CB710_DEBUG),y) + CFLAGS-cb710-mmc += -DDEBUG +diff --git a/drivers/mmc/host/mt6575_sd.h b/drivers/mmc/host/mt6575_sd.h +new file mode 100644 +index 0000000..406382c +--- /dev/null ++++ b/drivers/mmc/host/mt6575_sd.h +@@ -0,0 +1,1068 @@ ++/* Copyright Statement: ++ * ++ * This software/firmware and related documentation ("MediaTek Software") are ++ * protected under relevant copyright laws. The information contained herein ++ * is confidential and proprietary to MediaTek Inc. and/or its licensors. ++ * Without the prior written permission of MediaTek inc. and/or its licensors, ++ * any reproduction, modification, use or disclosure of MediaTek Software, ++ * and information contained herein, in whole or in part, shall be strictly prohibited. ++ */ ++/* MediaTek Inc. (C) 2010. All rights reserved. ++ * ++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES ++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") ++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON ++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. ++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR ++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH ++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES ++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES ++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK ++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR ++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND ++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, ++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, ++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO ++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. ++ * ++ * The following software/firmware and/or related documentation ("MediaTek Software") ++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's ++ * applicable license agreements with MediaTek Inc. ++ */ ++ ++#ifndef MT6575_SD_H ++#define MT6575_SD_H ++ ++#include <linux/bitops.h> ++#include <linux/mmc/host.h> ++ ++// #include <mach/mt6575_reg_base.h> /* --- by chhung */ ++ ++typedef void (*sdio_irq_handler_t)(void*); /* external irq handler */ ++typedef void (*pm_callback_t)(pm_message_t state, void *data); ++ ++#define MSDC_CD_PIN_EN (1 << 0) /* card detection pin is wired */ ++#define MSDC_WP_PIN_EN (1 << 1) /* write protection pin is wired */ ++#define MSDC_RST_PIN_EN (1 << 2) /* emmc reset pin is wired */ ++#define MSDC_SDIO_IRQ (1 << 3) /* use internal sdio irq (bus) */ ++#define MSDC_EXT_SDIO_IRQ (1 << 4) /* use external sdio irq */ ++#define MSDC_REMOVABLE (1 << 5) /* removable slot */ ++#define MSDC_SYS_SUSPEND (1 << 6) /* suspended by system */ ++#define MSDC_HIGHSPEED (1 << 7) /* high-speed mode support */ ++#define MSDC_UHS1 (1 << 8) /* uhs-1 mode support */ ++#define MSDC_DDR (1 << 9) /* ddr mode support */ ++#define MSDC_SPE (1 << 10) /* special support */ ++#define MSDC_INTERNAL_CLK (1 << 11) /* Force Internal clock */ ++#define MSDC_TABDRV (1 << 12) /* TABLET */ ++ ++ ++#define MSDC_SMPL_RISING (0) ++#define MSDC_SMPL_FALLING (1) ++ ++#define MSDC_CMD_PIN (0) ++#define MSDC_DAT_PIN (1) ++#define MSDC_CD_PIN (2) ++#define MSDC_WP_PIN (3) ++#define MSDC_RST_PIN (4) ++ ++enum { ++ MSDC_CLKSRC_26MHZ = 0, ++ MSDC_CLKSRC_197MHZ = 1, ++ MSDC_CLKSRC_208MHZ = 2 ++}; ++ ++struct msdc_hw { ++ unsigned char clk_src; /* host clock source */ ++ unsigned char cmd_edge; /* command latch edge */ ++ unsigned char data_edge; /* data latch edge */ ++ unsigned char clk_drv; /* clock pad driving */ ++ unsigned char cmd_drv; /* command pad driving */ ++ unsigned char dat_drv; /* data pad driving */ ++ unsigned long flags; /* hardware capability flags */ ++ unsigned long data_pins; /* data pins */ ++ unsigned long data_offset; /* data address offset */ ++ ++ /* config gpio pull mode */ ++ void (*config_gpio_pin)(int type, int pull); ++ ++ /* external power control for card */ ++ void (*ext_power_on)(void); ++ void (*ext_power_off)(void); ++ ++ /* external sdio irq operations */ ++ void (*request_sdio_eirq)(sdio_irq_handler_t sdio_irq_handler, void *data); ++ void (*enable_sdio_eirq)(void); ++ void (*disable_sdio_eirq)(void); ++ ++ /* external cd irq operations */ ++ void (*request_cd_eirq)(sdio_irq_handler_t cd_irq_handler, void *data); ++ void (*enable_cd_eirq)(void); ++ void (*disable_cd_eirq)(void); ++ int (*get_cd_status)(void); ++ ++ /* power management callback for external module */ ++ void (*register_pm)(pm_callback_t pm_cb, void *data); ++}; ++ ++extern struct msdc_hw msdc0_hw; ++extern struct msdc_hw msdc1_hw; ++extern struct msdc_hw msdc2_hw; ++extern struct msdc_hw msdc3_hw; ++ ++ ++/*--------------------------------------------------------------------------*/ ++/* Common Macro */ ++/*--------------------------------------------------------------------------*/ ++#define REG_ADDR(x) ((volatile u32*)(base + OFFSET_##x)) ++ ++/*--------------------------------------------------------------------------*/ ++/* Common Definition */ ++/*--------------------------------------------------------------------------*/ ++#define MSDC_FIFO_SZ (128) ++#define MSDC_FIFO_THD (64) // (128) ++#define MSDC_NUM (4) ++ ++#define MSDC_MS (0) ++#define MSDC_SDMMC (1) ++ ++#define MSDC_MODE_UNKNOWN (0) ++#define MSDC_MODE_PIO (1) ++#define MSDC_MODE_DMA_BASIC (2) ++#define MSDC_MODE_DMA_DESC (3) ++#define MSDC_MODE_DMA_ENHANCED (4) ++#define MSDC_MODE_MMC_STREAM (5) ++ ++#define MSDC_BUS_1BITS (0) ++#define MSDC_BUS_4BITS (1) ++#define MSDC_BUS_8BITS (2) ++ ++#define MSDC_BRUST_8B (3) ++#define MSDC_BRUST_16B (4) ++#define MSDC_BRUST_32B (5) ++#define MSDC_BRUST_64B (6) ++ ++#define MSDC_PIN_PULL_NONE (0) ++#define MSDC_PIN_PULL_DOWN (1) ++#define MSDC_PIN_PULL_UP (2) ++#define MSDC_PIN_KEEP (3) ++ ++#define MSDC_MAX_SCLK (48000000) /* +/- by chhung */ ++#define MSDC_MIN_SCLK (260000) ++ ++#define MSDC_AUTOCMD12 (0x0001) ++#define MSDC_AUTOCMD23 (0x0002) ++#define MSDC_AUTOCMD19 (0x0003) ++ ++#define MSDC_EMMC_BOOTMODE0 (0) /* Pull low CMD mode */ ++#define MSDC_EMMC_BOOTMODE1 (1) /* Reset CMD mode */ ++ ++enum { ++ RESP_NONE = 0, ++ RESP_R1, ++ RESP_R2, ++ RESP_R3, ++ RESP_R4, ++ RESP_R5, ++ RESP_R6, ++ RESP_R7, ++ RESP_R1B ++}; ++ ++/*--------------------------------------------------------------------------*/ ++/* Register Offset */ ++/*--------------------------------------------------------------------------*/ ++#define OFFSET_MSDC_CFG (0x0) ++#define OFFSET_MSDC_IOCON (0x04) ++#define OFFSET_MSDC_PS (0x08) ++#define OFFSET_MSDC_INT (0x0c) ++#define OFFSET_MSDC_INTEN (0x10) ++#define OFFSET_MSDC_FIFOCS (0x14) ++#define OFFSET_MSDC_TXDATA (0x18) ++#define OFFSET_MSDC_RXDATA (0x1c) ++#define OFFSET_SDC_CFG (0x30) ++#define OFFSET_SDC_CMD (0x34) ++#define OFFSET_SDC_ARG (0x38) ++#define OFFSET_SDC_STS (0x3c) ++#define OFFSET_SDC_RESP0 (0x40) ++#define OFFSET_SDC_RESP1 (0x44) ++#define OFFSET_SDC_RESP2 (0x48) ++#define OFFSET_SDC_RESP3 (0x4c) ++#define OFFSET_SDC_BLK_NUM (0x50) ++#define OFFSET_SDC_CSTS (0x58) ++#define OFFSET_SDC_CSTS_EN (0x5c) ++#define OFFSET_SDC_DCRC_STS (0x60) ++#define OFFSET_EMMC_CFG0 (0x70) ++#define OFFSET_EMMC_CFG1 (0x74) ++#define OFFSET_EMMC_STS (0x78) ++#define OFFSET_EMMC_IOCON (0x7c) ++#define OFFSET_SDC_ACMD_RESP (0x80) ++#define OFFSET_SDC_ACMD19_TRG (0x84) ++#define OFFSET_SDC_ACMD19_STS (0x88) ++#define OFFSET_MSDC_DMA_SA (0x90) ++#define OFFSET_MSDC_DMA_CA (0x94) ++#define OFFSET_MSDC_DMA_CTRL (0x98) ++#define OFFSET_MSDC_DMA_CFG (0x9c) ++#define OFFSET_MSDC_DBG_SEL (0xa0) ++#define OFFSET_MSDC_DBG_OUT (0xa4) ++#define OFFSET_MSDC_PATCH_BIT (0xb0) ++#define OFFSET_MSDC_PATCH_BIT1 (0xb4) ++#define OFFSET_MSDC_PAD_CTL0 (0xe0) ++#define OFFSET_MSDC_PAD_CTL1 (0xe4) ++#define OFFSET_MSDC_PAD_CTL2 (0xe8) ++#define OFFSET_MSDC_PAD_TUNE (0xec) ++#define OFFSET_MSDC_DAT_RDDLY0 (0xf0) ++#define OFFSET_MSDC_DAT_RDDLY1 (0xf4) ++#define OFFSET_MSDC_HW_DBG (0xf8) ++#define OFFSET_MSDC_VERSION (0x100) ++#define OFFSET_MSDC_ECO_VER (0x104) ++ ++/*--------------------------------------------------------------------------*/ ++/* Register Address */ ++/*--------------------------------------------------------------------------*/ ++ ++/* common register */ ++#define MSDC_CFG REG_ADDR(MSDC_CFG) ++#define MSDC_IOCON REG_ADDR(MSDC_IOCON) ++#define MSDC_PS REG_ADDR(MSDC_PS) ++#define MSDC_INT REG_ADDR(MSDC_INT) ++#define MSDC_INTEN REG_ADDR(MSDC_INTEN) ++#define MSDC_FIFOCS REG_ADDR(MSDC_FIFOCS) ++#define MSDC_TXDATA REG_ADDR(MSDC_TXDATA) ++#define MSDC_RXDATA REG_ADDR(MSDC_RXDATA) ++#define MSDC_PATCH_BIT0 REG_ADDR(MSDC_PATCH_BIT) ++ ++/* sdmmc register */ ++#define SDC_CFG REG_ADDR(SDC_CFG) ++#define SDC_CMD REG_ADDR(SDC_CMD) ++#define SDC_ARG REG_ADDR(SDC_ARG) ++#define SDC_STS REG_ADDR(SDC_STS) ++#define SDC_RESP0 REG_ADDR(SDC_RESP0) ++#define SDC_RESP1 REG_ADDR(SDC_RESP1) ++#define SDC_RESP2 REG_ADDR(SDC_RESP2) ++#define SDC_RESP3 REG_ADDR(SDC_RESP3) ++#define SDC_BLK_NUM REG_ADDR(SDC_BLK_NUM) ++#define SDC_CSTS REG_ADDR(SDC_CSTS) ++#define SDC_CSTS_EN REG_ADDR(SDC_CSTS_EN) ++#define SDC_DCRC_STS REG_ADDR(SDC_DCRC_STS) ++ ++/* emmc register*/ ++#define EMMC_CFG0 REG_ADDR(EMMC_CFG0) ++#define EMMC_CFG1 REG_ADDR(EMMC_CFG1) ++#define EMMC_STS REG_ADDR(EMMC_STS) ++#define EMMC_IOCON REG_ADDR(EMMC_IOCON) ++ ++/* auto command register */ ++#define SDC_ACMD_RESP REG_ADDR(SDC_ACMD_RESP) ++#define SDC_ACMD19_TRG REG_ADDR(SDC_ACMD19_TRG) ++#define SDC_ACMD19_STS REG_ADDR(SDC_ACMD19_STS) ++ ++/* dma register */ ++#define MSDC_DMA_SA REG_ADDR(MSDC_DMA_SA) ++#define MSDC_DMA_CA REG_ADDR(MSDC_DMA_CA) ++#define MSDC_DMA_CTRL REG_ADDR(MSDC_DMA_CTRL) ++#define MSDC_DMA_CFG REG_ADDR(MSDC_DMA_CFG) ++ ++/* pad ctrl register */ ++#define MSDC_PAD_CTL0 REG_ADDR(MSDC_PAD_CTL0) ++#define MSDC_PAD_CTL1 REG_ADDR(MSDC_PAD_CTL1) ++#define MSDC_PAD_CTL2 REG_ADDR(MSDC_PAD_CTL2) ++ ++/* data read delay */ ++#define MSDC_DAT_RDDLY0 REG_ADDR(MSDC_DAT_RDDLY0) ++#define MSDC_DAT_RDDLY1 REG_ADDR(MSDC_DAT_RDDLY1) ++ ++/* debug register */ ++#define MSDC_DBG_SEL REG_ADDR(MSDC_DBG_SEL) ++#define MSDC_DBG_OUT REG_ADDR(MSDC_DBG_OUT) ++ ++/* misc register */ ++#define MSDC_PATCH_BIT REG_ADDR(MSDC_PATCH_BIT) ++#define MSDC_PATCH_BIT1 REG_ADDR(MSDC_PATCH_BIT1) ++#define MSDC_PAD_TUNE REG_ADDR(MSDC_PAD_TUNE) ++#define MSDC_HW_DBG REG_ADDR(MSDC_HW_DBG) ++#define MSDC_VERSION REG_ADDR(MSDC_VERSION) ++#define MSDC_ECO_VER REG_ADDR(MSDC_ECO_VER) /* ECO Version */ ++ ++/*--------------------------------------------------------------------------*/ ++/* Register Mask */ ++/*--------------------------------------------------------------------------*/ ++ ++/* MSDC_CFG mask */ ++#define MSDC_CFG_MODE (0x1 << 0) /* RW */ ++#define MSDC_CFG_CKPDN (0x1 << 1) /* RW */ ++#define MSDC_CFG_RST (0x1 << 2) /* RW */ ++#define MSDC_CFG_PIO (0x1 << 3) /* RW */ ++#define MSDC_CFG_CKDRVEN (0x1 << 4) /* RW */ ++#define MSDC_CFG_BV18SDT (0x1 << 5) /* RW */ ++#define MSDC_CFG_BV18PSS (0x1 << 6) /* R */ ++#define MSDC_CFG_CKSTB (0x1 << 7) /* R */ ++#define MSDC_CFG_CKDIV (0xff << 8) /* RW */ ++#define MSDC_CFG_CKMOD (0x3 << 16) /* RW */ ++ ++/* MSDC_IOCON mask */ ++#define MSDC_IOCON_SDR104CKS (0x1 << 0) /* RW */ ++#define MSDC_IOCON_RSPL (0x1 << 1) /* RW */ ++#define MSDC_IOCON_DSPL (0x1 << 2) /* RW */ ++#define MSDC_IOCON_DDLSEL (0x1 << 3) /* RW */ ++#define MSDC_IOCON_DDR50CKD (0x1 << 4) /* RW */ ++#define MSDC_IOCON_DSPLSEL (0x1 << 5) /* RW */ ++#define MSDC_IOCON_D0SPL (0x1 << 16) /* RW */ ++#define MSDC_IOCON_D1SPL (0x1 << 17) /* RW */ ++#define MSDC_IOCON_D2SPL (0x1 << 18) /* RW */ ++#define MSDC_IOCON_D3SPL (0x1 << 19) /* RW */ ++#define MSDC_IOCON_D4SPL (0x1 << 20) /* RW */ ++#define MSDC_IOCON_D5SPL (0x1 << 21) /* RW */ ++#define MSDC_IOCON_D6SPL (0x1 << 22) /* RW */ ++#define MSDC_IOCON_D7SPL (0x1 << 23) /* RW */ ++#define MSDC_IOCON_RISCSZ (0x3 << 24) /* RW */ ++ ++/* MSDC_PS mask */ ++#define MSDC_PS_CDEN (0x1 << 0) /* RW */ ++#define MSDC_PS_CDSTS (0x1 << 1) /* R */ ++#define MSDC_PS_CDDEBOUNCE (0xf << 12) /* RW */ ++#define MSDC_PS_DAT (0xff << 16) /* R */ ++#define MSDC_PS_CMD (0x1 << 24) /* R */ ++#define MSDC_PS_WP (0x1UL<< 31) /* R */ ++ ++/* MSDC_INT mask */ ++#define MSDC_INT_MMCIRQ (0x1 << 0) /* W1C */ ++#define MSDC_INT_CDSC (0x1 << 1) /* W1C */ ++#define MSDC_INT_ACMDRDY (0x1 << 3) /* W1C */ ++#define MSDC_INT_ACMDTMO (0x1 << 4) /* W1C */ ++#define MSDC_INT_ACMDCRCERR (0x1 << 5) /* W1C */ ++#define MSDC_INT_DMAQ_EMPTY (0x1 << 6) /* W1C */ ++#define MSDC_INT_SDIOIRQ (0x1 << 7) /* W1C */ ++#define MSDC_INT_CMDRDY (0x1 << 8) /* W1C */ ++#define MSDC_INT_CMDTMO (0x1 << 9) /* W1C */ ++#define MSDC_INT_RSPCRCERR (0x1 << 10) /* W1C */ ++#define MSDC_INT_CSTA (0x1 << 11) /* R */ ++#define MSDC_INT_XFER_COMPL (0x1 << 12) /* W1C */ ++#define MSDC_INT_DXFER_DONE (0x1 << 13) /* W1C */ ++#define MSDC_INT_DATTMO (0x1 << 14) /* W1C */ ++#define MSDC_INT_DATCRCERR (0x1 << 15) /* W1C */ ++#define MSDC_INT_ACMD19_DONE (0x1 << 16) /* W1C */ ++ ++/* MSDC_INTEN mask */ ++#define MSDC_INTEN_MMCIRQ (0x1 << 0) /* RW */ ++#define MSDC_INTEN_CDSC (0x1 << 1) /* RW */ ++#define MSDC_INTEN_ACMDRDY (0x1 << 3) /* RW */ ++#define MSDC_INTEN_ACMDTMO (0x1 << 4) /* RW */ ++#define MSDC_INTEN_ACMDCRCERR (0x1 << 5) /* RW */ ++#define MSDC_INTEN_DMAQ_EMPTY (0x1 << 6) /* RW */ ++#define MSDC_INTEN_SDIOIRQ (0x1 << 7) /* RW */ ++#define MSDC_INTEN_CMDRDY (0x1 << 8) /* RW */ ++#define MSDC_INTEN_CMDTMO (0x1 << 9) /* RW */ ++#define MSDC_INTEN_RSPCRCERR (0x1 << 10) /* RW */ ++#define MSDC_INTEN_CSTA (0x1 << 11) /* RW */ ++#define MSDC_INTEN_XFER_COMPL (0x1 << 12) /* RW */ ++#define MSDC_INTEN_DXFER_DONE (0x1 << 13) /* RW */ ++#define MSDC_INTEN_DATTMO (0x1 << 14) /* RW */ ++#define MSDC_INTEN_DATCRCERR (0x1 << 15) /* RW */ ++#define MSDC_INTEN_ACMD19_DONE (0x1 << 16) /* RW */ ++ ++/* MSDC_FIFOCS mask */ ++#define MSDC_FIFOCS_RXCNT (0xff << 0) /* R */ ++#define MSDC_FIFOCS_TXCNT (0xff << 16) /* R */ ++#define MSDC_FIFOCS_CLR (0x1UL<< 31) /* RW */ ++ ++/* SDC_CFG mask */ ++#define SDC_CFG_SDIOINTWKUP (0x1 << 0) /* RW */ ++#define SDC_CFG_INSWKUP (0x1 << 1) /* RW */ ++#define SDC_CFG_BUSWIDTH (0x3 << 16) /* RW */ ++#define SDC_CFG_SDIO (0x1 << 19) /* RW */ ++#define SDC_CFG_SDIOIDE (0x1 << 20) /* RW */ ++#define SDC_CFG_INTATGAP (0x1 << 21) /* RW */ ++#define SDC_CFG_DTOC (0xffUL << 24) /* RW */ ++ ++/* SDC_CMD mask */ ++#define SDC_CMD_OPC (0x3f << 0) /* RW */ ++#define SDC_CMD_BRK (0x1 << 6) /* RW */ ++#define SDC_CMD_RSPTYP (0x7 << 7) /* RW */ ++#define SDC_CMD_DTYP (0x3 << 11) /* RW */ ++#define SDC_CMD_DTYP (0x3 << 11) /* RW */ ++#define SDC_CMD_RW (0x1 << 13) /* RW */ ++#define SDC_CMD_STOP (0x1 << 14) /* RW */ ++#define SDC_CMD_GOIRQ (0x1 << 15) /* RW */ ++#define SDC_CMD_BLKLEN (0xfff<< 16) /* RW */ ++#define SDC_CMD_AUTOCMD (0x3 << 28) /* RW */ ++#define SDC_CMD_VOLSWTH (0x1 << 30) /* RW */ ++ ++/* SDC_STS mask */ ++#define SDC_STS_SDCBUSY (0x1 << 0) /* RW */ ++#define SDC_STS_CMDBUSY (0x1 << 1) /* RW */ ++#define SDC_STS_SWR_COMPL (0x1 << 31) /* RW */ ++ ++/* SDC_DCRC_STS mask */ ++#define SDC_DCRC_STS_NEG (0xf << 8) /* RO */ ++#define SDC_DCRC_STS_POS (0xff << 0) /* RO */ ++ ++/* EMMC_CFG0 mask */ ++#define EMMC_CFG0_BOOTSTART (0x1 << 0) /* W */ ++#define EMMC_CFG0_BOOTSTOP (0x1 << 1) /* W */ ++#define EMMC_CFG0_BOOTMODE (0x1 << 2) /* RW */ ++#define EMMC_CFG0_BOOTACKDIS (0x1 << 3) /* RW */ ++#define EMMC_CFG0_BOOTWDLY (0x7 << 12) /* RW */ ++#define EMMC_CFG0_BOOTSUPP (0x1 << 15) /* RW */ ++ ++/* EMMC_CFG1 mask */ ++#define EMMC_CFG1_BOOTDATTMC (0xfffff << 0) /* RW */ ++#define EMMC_CFG1_BOOTACKTMC (0xfffUL << 20) /* RW */ ++ ++/* EMMC_STS mask */ ++#define EMMC_STS_BOOTCRCERR (0x1 << 0) /* W1C */ ++#define EMMC_STS_BOOTACKERR (0x1 << 1) /* W1C */ ++#define EMMC_STS_BOOTDATTMO (0x1 << 2) /* W1C */ ++#define EMMC_STS_BOOTACKTMO (0x1 << 3) /* W1C */ ++#define EMMC_STS_BOOTUPSTATE (0x1 << 4) /* R */ ++#define EMMC_STS_BOOTACKRCV (0x1 << 5) /* W1C */ ++#define EMMC_STS_BOOTDATRCV (0x1 << 6) /* R */ ++ ++/* EMMC_IOCON mask */ ++#define EMMC_IOCON_BOOTRST (0x1 << 0) /* RW */ ++ ++/* SDC_ACMD19_TRG mask */ ++#define SDC_ACMD19_TRG_TUNESEL (0xf << 0) /* RW */ ++ ++/* MSDC_DMA_CTRL mask */ ++#define MSDC_DMA_CTRL_START (0x1 << 0) /* W */ ++#define MSDC_DMA_CTRL_STOP (0x1 << 1) /* W */ ++#define MSDC_DMA_CTRL_RESUME (0x1 << 2) /* W */ ++#define MSDC_DMA_CTRL_MODE (0x1 << 8) /* RW */ ++#define MSDC_DMA_CTRL_LASTBUF (0x1 << 10) /* RW */ ++#define MSDC_DMA_CTRL_BRUSTSZ (0x7 << 12) /* RW */ ++#define MSDC_DMA_CTRL_XFERSZ (0xffffUL << 16)/* RW */ ++ ++/* MSDC_DMA_CFG mask */ ++#define MSDC_DMA_CFG_STS (0x1 << 0) /* R */ ++#define MSDC_DMA_CFG_DECSEN (0x1 << 1) /* RW */ ++#define MSDC_DMA_CFG_BDCSERR (0x1 << 4) /* R */ ++#define MSDC_DMA_CFG_GPDCSERR (0x1 << 5) /* R */ ++ ++/* MSDC_PATCH_BIT mask */ ++#define MSDC_PATCH_BIT_WFLSMODE (0x1 << 0) /* RW */ ++#define MSDC_PATCH_BIT_ODDSUPP (0x1 << 1) /* RW */ ++#define MSDC_PATCH_BIT_CKGEN_CK (0x1 << 6) /* E2: Fixed to 1 */ ++#define MSDC_PATCH_BIT_IODSSEL (0x1 << 16) /* RW */ ++#define MSDC_PATCH_BIT_IOINTSEL (0x1 << 17) /* RW */ ++#define MSDC_PATCH_BIT_BUSYDLY (0xf << 18) /* RW */ ++#define MSDC_PATCH_BIT_WDOD (0xf << 22) /* RW */ ++#define MSDC_PATCH_BIT_IDRTSEL (0x1 << 26) /* RW */ ++#define MSDC_PATCH_BIT_CMDFSEL (0x1 << 27) /* RW */ ++#define MSDC_PATCH_BIT_INTDLSEL (0x1 << 28) /* RW */ ++#define MSDC_PATCH_BIT_SPCPUSH (0x1 << 29) /* RW */ ++#define MSDC_PATCH_BIT_DECRCTMO (0x1 << 30) /* RW */ ++ ++/* MSDC_PATCH_BIT1 mask */ ++#define MSDC_PATCH_BIT1_WRDAT_CRCS (0x7 << 3) ++#define MSDC_PATCH_BIT1_CMD_RSP (0x7 << 0) ++ ++/* MSDC_PAD_CTL0 mask */ ++#define MSDC_PAD_CTL0_CLKDRVN (0x7 << 0) /* RW */ ++#define MSDC_PAD_CTL0_CLKDRVP (0x7 << 4) /* RW */ ++#define MSDC_PAD_CTL0_CLKSR (0x1 << 8) /* RW */ ++#define MSDC_PAD_CTL0_CLKPD (0x1 << 16) /* RW */ ++#define MSDC_PAD_CTL0_CLKPU (0x1 << 17) /* RW */ ++#define MSDC_PAD_CTL0_CLKSMT (0x1 << 18) /* RW */ ++#define MSDC_PAD_CTL0_CLKIES (0x1 << 19) /* RW */ ++#define MSDC_PAD_CTL0_CLKTDSEL (0xf << 20) /* RW */ ++#define MSDC_PAD_CTL0_CLKRDSEL (0xffUL<< 24) /* RW */ ++ ++/* MSDC_PAD_CTL1 mask */ ++#define MSDC_PAD_CTL1_CMDDRVN (0x7 << 0) /* RW */ ++#define MSDC_PAD_CTL1_CMDDRVP (0x7 << 4) /* RW */ ++#define MSDC_PAD_CTL1_CMDSR (0x1 << 8) /* RW */ ++#define MSDC_PAD_CTL1_CMDPD (0x1 << 16) /* RW */ ++#define MSDC_PAD_CTL1_CMDPU (0x1 << 17) /* RW */ ++#define MSDC_PAD_CTL1_CMDSMT (0x1 << 18) /* RW */ ++#define MSDC_PAD_CTL1_CMDIES (0x1 << 19) /* RW */ ++#define MSDC_PAD_CTL1_CMDTDSEL (0xf << 20) /* RW */ ++#define MSDC_PAD_CTL1_CMDRDSEL (0xffUL<< 24) /* RW */ ++ ++/* MSDC_PAD_CTL2 mask */ ++#define MSDC_PAD_CTL2_DATDRVN (0x7 << 0) /* RW */ ++#define MSDC_PAD_CTL2_DATDRVP (0x7 << 4) /* RW */ ++#define MSDC_PAD_CTL2_DATSR (0x1 << 8) /* RW */ ++#define MSDC_PAD_CTL2_DATPD (0x1 << 16) /* RW */ ++#define MSDC_PAD_CTL2_DATPU (0x1 << 17) /* RW */ ++#define MSDC_PAD_CTL2_DATIES (0x1 << 19) /* RW */ ++#define MSDC_PAD_CTL2_DATSMT (0x1 << 18) /* RW */ ++#define MSDC_PAD_CTL2_DATTDSEL (0xf << 20) /* RW */ ++#define MSDC_PAD_CTL2_DATRDSEL (0xffUL<< 24) /* RW */ ++ ++/* MSDC_PAD_TUNE mask */ ++#define MSDC_PAD_TUNE_DATWRDLY (0x1F << 0) /* RW */ ++#define MSDC_PAD_TUNE_DATRRDLY (0x1F << 8) /* RW */ ++#define MSDC_PAD_TUNE_CMDRDLY (0x1F << 16) /* RW */ ++#define MSDC_PAD_TUNE_CMDRRDLY (0x1FUL << 22) /* RW */ ++#define MSDC_PAD_TUNE_CLKTXDLY (0x1FUL << 27) /* RW */ ++ ++/* MSDC_DAT_RDDLY0/1 mask */ ++#define MSDC_DAT_RDDLY0_D0 (0x1F << 0) /* RW */ ++#define MSDC_DAT_RDDLY0_D1 (0x1F << 8) /* RW */ ++#define MSDC_DAT_RDDLY0_D2 (0x1F << 16) /* RW */ ++#define MSDC_DAT_RDDLY0_D3 (0x1F << 24) /* RW */ ++ ++#define MSDC_DAT_RDDLY1_D4 (0x1F << 0) /* RW */ ++#define MSDC_DAT_RDDLY1_D5 (0x1F << 8) /* RW */ ++#define MSDC_DAT_RDDLY1_D6 (0x1F << 16) /* RW */ ++#define MSDC_DAT_RDDLY1_D7 (0x1F << 24) /* RW */ ++ ++#define MSDC_CKGEN_MSDC_DLY_SEL (0x1F<<10) ++#define MSDC_INT_DAT_LATCH_CK_SEL (0x7<<7) ++#define MSDC_CKGEN_MSDC_CK_SEL (0x1<<6) ++#define CARD_READY_FOR_DATA (1<<8) ++#define CARD_CURRENT_STATE(x) ((x&0x00001E00)>>9) ++ ++/*--------------------------------------------------------------------------*/ ++/* Descriptor Structure */ ++/*--------------------------------------------------------------------------*/ ++typedef struct { ++ u32 hwo:1; /* could be changed by hw */ ++ u32 bdp:1; ++ u32 rsv0:6; ++ u32 chksum:8; ++ u32 intr:1; ++ u32 rsv1:15; ++ void *next; ++ void *ptr; ++ u32 buflen:16; ++ u32 extlen:8; ++ u32 rsv2:8; ++ u32 arg; ++ u32 blknum; ++ u32 cmd; ++} gpd_t; ++ ++typedef struct { ++ u32 eol:1; ++ u32 rsv0:7; ++ u32 chksum:8; ++ u32 rsv1:1; ++ u32 blkpad:1; ++ u32 dwpad:1; ++ u32 rsv2:13; ++ void *next; ++ void *ptr; ++ u32 buflen:16; ++ u32 rsv3:16; ++} bd_t; ++ ++/*--------------------------------------------------------------------------*/ ++/* Register Debugging Structure */ ++/*--------------------------------------------------------------------------*/ ++ ++typedef struct { ++ u32 msdc:1; ++ u32 ckpwn:1; ++ u32 rst:1; ++ u32 pio:1; ++ u32 ckdrven:1; ++ u32 start18v:1; ++ u32 pass18v:1; ++ u32 ckstb:1; ++ u32 ckdiv:8; ++ u32 ckmod:2; ++ u32 pad:14; ++} msdc_cfg_reg; ++typedef struct { ++ u32 sdr104cksel:1; ++ u32 rsmpl:1; ++ u32 dsmpl:1; ++ u32 ddlysel:1; ++ u32 ddr50ckd:1; ++ u32 dsplsel:1; ++ u32 pad1:10; ++ u32 d0spl:1; ++ u32 d1spl:1; ++ u32 d2spl:1; ++ u32 d3spl:1; ++ u32 d4spl:1; ++ u32 d5spl:1; ++ u32 d6spl:1; ++ u32 d7spl:1; ++ u32 riscsz:1; ++ u32 pad2:7; ++} msdc_iocon_reg; ++typedef struct { ++ u32 cden:1; ++ u32 cdsts:1; ++ u32 pad1:10; ++ u32 cddebounce:4; ++ u32 dat:8; ++ u32 cmd:1; ++ u32 pad2:6; ++ u32 wp:1; ++} msdc_ps_reg; ++typedef struct { ++ u32 mmcirq:1; ++ u32 cdsc:1; ++ u32 pad1:1; ++ u32 atocmdrdy:1; ++ u32 atocmdtmo:1; ++ u32 atocmdcrc:1; ++ u32 dmaqempty:1; ++ u32 sdioirq:1; ++ u32 cmdrdy:1; ++ u32 cmdtmo:1; ++ u32 rspcrc:1; ++ u32 csta:1; ++ u32 xfercomp:1; ++ u32 dxferdone:1; ++ u32 dattmo:1; ++ u32 datcrc:1; ++ u32 atocmd19done:1; ++ u32 pad2:15; ++} msdc_int_reg; ++typedef struct { ++ u32 mmcirq:1; ++ u32 cdsc:1; ++ u32 pad1:1; ++ u32 atocmdrdy:1; ++ u32 atocmdtmo:1; ++ u32 atocmdcrc:1; ++ u32 dmaqempty:1; ++ u32 sdioirq:1; ++ u32 cmdrdy:1; ++ u32 cmdtmo:1; ++ u32 rspcrc:1; ++ u32 csta:1; ++ u32 xfercomp:1; ++ u32 dxferdone:1; ++ u32 dattmo:1; ++ u32 datcrc:1; ++ u32 atocmd19done:1; ++ u32 pad2:15; ++} msdc_inten_reg; ++typedef struct { ++ u32 rxcnt:8; ++ u32 pad1:8; ++ u32 txcnt:8; ++ u32 pad2:7; ++ u32 clr:1; ++} msdc_fifocs_reg; ++typedef struct { ++ u32 val; ++} msdc_txdat_reg; ++typedef struct { ++ u32 val; ++} msdc_rxdat_reg; ++typedef struct { ++ u32 sdiowkup:1; ++ u32 inswkup:1; ++ u32 pad1:14; ++ u32 buswidth:2; ++ u32 pad2:1; ++ u32 sdio:1; ++ u32 sdioide:1; ++ u32 intblkgap:1; ++ u32 pad4:2; ++ u32 dtoc:8; ++} sdc_cfg_reg; ++typedef struct { ++ u32 cmd:6; ++ u32 brk:1; ++ u32 rsptyp:3; ++ u32 pad1:1; ++ u32 dtype:2; ++ u32 rw:1; ++ u32 stop:1; ++ u32 goirq:1; ++ u32 blklen:12; ++ u32 atocmd:2; ++ u32 volswth:1; ++ u32 pad2:1; ++} sdc_cmd_reg; ++typedef struct { ++ u32 arg; ++} sdc_arg_reg; ++typedef struct { ++ u32 sdcbusy:1; ++ u32 cmdbusy:1; ++ u32 pad:29; ++ u32 swrcmpl:1; ++} sdc_sts_reg; ++typedef struct { ++ u32 val; ++} sdc_resp0_reg; ++typedef struct { ++ u32 val; ++} sdc_resp1_reg; ++typedef struct { ++ u32 val; ++} sdc_resp2_reg; ++typedef struct { ++ u32 val; ++} sdc_resp3_reg; ++typedef struct { ++ u32 num; ++} sdc_blknum_reg; ++typedef struct { ++ u32 sts; ++} sdc_csts_reg; ++typedef struct { ++ u32 sts; ++} sdc_cstsen_reg; ++typedef struct { ++ u32 datcrcsts:8; ++ u32 ddrcrcsts:4; ++ u32 pad:20; ++} sdc_datcrcsts_reg; ++typedef struct { ++ u32 bootstart:1; ++ u32 bootstop:1; ++ u32 bootmode:1; ++ u32 pad1:9; ++ u32 bootwaidly:3; ++ u32 bootsupp:1; ++ u32 pad2:16; ++} emmc_cfg0_reg; ++typedef struct { ++ u32 bootcrctmc:16; ++ u32 pad:4; ++ u32 bootacktmc:12; ++} emmc_cfg1_reg; ++typedef struct { ++ u32 bootcrcerr:1; ++ u32 bootackerr:1; ++ u32 bootdattmo:1; ++ u32 bootacktmo:1; ++ u32 bootupstate:1; ++ u32 bootackrcv:1; ++ u32 bootdatrcv:1; ++ u32 pad:25; ++} emmc_sts_reg; ++typedef struct { ++ u32 bootrst:1; ++ u32 pad:31; ++} emmc_iocon_reg; ++typedef struct { ++ u32 val; ++} msdc_acmd_resp_reg; ++typedef struct { ++ u32 tunesel:4; ++ u32 pad:28; ++} msdc_acmd19_trg_reg; ++typedef struct { ++ u32 val; ++} msdc_acmd19_sts_reg; ++typedef struct { ++ u32 addr; ++} msdc_dma_sa_reg; ++typedef struct { ++ u32 addr; ++} msdc_dma_ca_reg; ++typedef struct { ++ u32 start:1; ++ u32 stop:1; ++ u32 resume:1; ++ u32 pad1:5; ++ u32 mode:1; ++ u32 pad2:1; ++ u32 lastbuf:1; ++ u32 pad3:1; ++ u32 brustsz:3; ++ u32 pad4:1; ++ u32 xfersz:16; ++} msdc_dma_ctrl_reg; ++typedef struct { ++ u32 status:1; ++ u32 decsen:1; ++ u32 pad1:2; ++ u32 bdcsen:1; ++ u32 gpdcsen:1; ++ u32 pad2:26; ++} msdc_dma_cfg_reg; ++typedef struct { ++ u32 sel:16; ++ u32 pad2:16; ++} msdc_dbg_sel_reg; ++typedef struct { ++ u32 val; ++} msdc_dbg_out_reg; ++typedef struct { ++ u32 clkdrvn:3; ++ u32 rsv0:1; ++ u32 clkdrvp:3; ++ u32 rsv1:1; ++ u32 clksr:1; ++ u32 rsv2:7; ++ u32 clkpd:1; ++ u32 clkpu:1; ++ u32 clksmt:1; ++ u32 clkies:1; ++ u32 clktdsel:4; ++ u32 clkrdsel:8; ++} msdc_pad_ctl0_reg; ++typedef struct { ++ u32 cmddrvn:3; ++ u32 rsv0:1; ++ u32 cmddrvp:3; ++ u32 rsv1:1; ++ u32 cmdsr:1; ++ u32 rsv2:7; ++ u32 cmdpd:1; ++ u32 cmdpu:1; ++ u32 cmdsmt:1; ++ u32 cmdies:1; ++ u32 cmdtdsel:4; ++ u32 cmdrdsel:8; ++} msdc_pad_ctl1_reg; ++typedef struct { ++ u32 datdrvn:3; ++ u32 rsv0:1; ++ u32 datdrvp:3; ++ u32 rsv1:1; ++ u32 datsr:1; ++ u32 rsv2:7; ++ u32 datpd:1; ++ u32 datpu:1; ++ u32 datsmt:1; ++ u32 daties:1; ++ u32 dattdsel:4; ++ u32 datrdsel:8; ++} msdc_pad_ctl2_reg; ++typedef struct { ++ u32 wrrxdly:3; ++ u32 pad1:5; ++ u32 rdrxdly:8; ++ u32 pad2:16; ++} msdc_pad_tune_reg; ++typedef struct { ++ u32 dat0:5; ++ u32 rsv0:3; ++ u32 dat1:5; ++ u32 rsv1:3; ++ u32 dat2:5; ++ u32 rsv2:3; ++ u32 dat3:5; ++ u32 rsv3:3; ++} msdc_dat_rddly0; ++typedef struct { ++ u32 dat4:5; ++ u32 rsv4:3; ++ u32 dat5:5; ++ u32 rsv5:3; ++ u32 dat6:5; ++ u32 rsv6:3; ++ u32 dat7:5; ++ u32 rsv7:3; ++} msdc_dat_rddly1; ++typedef struct { ++ u32 dbg0sel:8; ++ u32 dbg1sel:6; ++ u32 pad1:2; ++ u32 dbg2sel:6; ++ u32 pad2:2; ++ u32 dbg3sel:6; ++ u32 pad3:2; ++} msdc_hw_dbg_reg; ++typedef struct { ++ u32 val; ++} msdc_version_reg; ++typedef struct { ++ u32 val; ++} msdc_eco_ver_reg; ++ ++struct msdc_regs { ++ msdc_cfg_reg msdc_cfg; /* base+0x00h */ ++ msdc_iocon_reg msdc_iocon; /* base+0x04h */ ++ msdc_ps_reg msdc_ps; /* base+0x08h */ ++ msdc_int_reg msdc_int; /* base+0x0ch */ ++ msdc_inten_reg msdc_inten; /* base+0x10h */ ++ msdc_fifocs_reg msdc_fifocs; /* base+0x14h */ ++ msdc_txdat_reg msdc_txdat; /* base+0x18h */ ++ msdc_rxdat_reg msdc_rxdat; /* base+0x1ch */ ++ u32 rsv1[4]; ++ sdc_cfg_reg sdc_cfg; /* base+0x30h */ ++ sdc_cmd_reg sdc_cmd; /* base+0x34h */ ++ sdc_arg_reg sdc_arg; /* base+0x38h */ ++ sdc_sts_reg sdc_sts; /* base+0x3ch */ ++ sdc_resp0_reg sdc_resp0; /* base+0x40h */ ++ sdc_resp1_reg sdc_resp1; /* base+0x44h */ ++ sdc_resp2_reg sdc_resp2; /* base+0x48h */ ++ sdc_resp3_reg sdc_resp3; /* base+0x4ch */ ++ sdc_blknum_reg sdc_blknum; /* base+0x50h */ ++ u32 rsv2[1]; ++ sdc_csts_reg sdc_csts; /* base+0x58h */ ++ sdc_cstsen_reg sdc_cstsen; /* base+0x5ch */ ++ sdc_datcrcsts_reg sdc_dcrcsta; /* base+0x60h */ ++ u32 rsv3[3]; ++ emmc_cfg0_reg emmc_cfg0; /* base+0x70h */ ++ emmc_cfg1_reg emmc_cfg1; /* base+0x74h */ ++ emmc_sts_reg emmc_sts; /* base+0x78h */ ++ emmc_iocon_reg emmc_iocon; /* base+0x7ch */ ++ msdc_acmd_resp_reg acmd_resp; /* base+0x80h */ ++ msdc_acmd19_trg_reg acmd19_trg; /* base+0x84h */ ++ msdc_acmd19_sts_reg acmd19_sts; /* base+0x88h */ ++ u32 rsv4[1]; ++ msdc_dma_sa_reg dma_sa; /* base+0x90h */ ++ msdc_dma_ca_reg dma_ca; /* base+0x94h */ ++ msdc_dma_ctrl_reg dma_ctrl; /* base+0x98h */ ++ msdc_dma_cfg_reg dma_cfg; /* base+0x9ch */ ++ msdc_dbg_sel_reg dbg_sel; /* base+0xa0h */ ++ msdc_dbg_out_reg dbg_out; /* base+0xa4h */ ++ u32 rsv5[2]; ++ u32 patch0; /* base+0xb0h */ ++ u32 patch1; /* base+0xb4h */ ++ u32 rsv6[10]; ++ msdc_pad_ctl0_reg pad_ctl0; /* base+0xe0h */ ++ msdc_pad_ctl1_reg pad_ctl1; /* base+0xe4h */ ++ msdc_pad_ctl2_reg pad_ctl2; /* base+0xe8h */ ++ msdc_pad_tune_reg pad_tune; /* base+0xech */ ++ msdc_dat_rddly0 dat_rddly0; /* base+0xf0h */ ++ msdc_dat_rddly1 dat_rddly1; /* base+0xf4h */ ++ msdc_hw_dbg_reg hw_dbg; /* base+0xf8h */ ++ u32 rsv7[1]; ++ msdc_version_reg version; /* base+0x100h */ ++ msdc_eco_ver_reg eco_ver; /* base+0x104h */ ++}; ++ ++struct scatterlist_ex { ++ u32 cmd; ++ u32 arg; ++ u32 sglen; ++ struct scatterlist *sg; ++}; ++ ++#define DMA_FLAG_NONE (0x00000000) ++#define DMA_FLAG_EN_CHKSUM (0x00000001) ++#define DMA_FLAG_PAD_BLOCK (0x00000002) ++#define DMA_FLAG_PAD_DWORD (0x00000004) ++ ++struct msdc_dma { ++ u32 flags; /* flags */ ++ u32 xfersz; /* xfer size in bytes */ ++ u32 sglen; /* size of scatter list */ ++ u32 blklen; /* block size */ ++ struct scatterlist *sg; /* I/O scatter list */ ++ struct scatterlist_ex *esg; /* extended I/O scatter list */ ++ u8 mode; /* dma mode */ ++ u8 burstsz; /* burst size */ ++ u8 intr; /* dma done interrupt */ ++ u8 padding; /* padding */ ++ u32 cmd; /* enhanced mode command */ ++ u32 arg; /* enhanced mode arg */ ++ u32 rsp; /* enhanced mode command response */ ++ u32 autorsp; /* auto command response */ ++ ++ gpd_t *gpd; /* pointer to gpd array */ ++ bd_t *bd; /* pointer to bd array */ ++ dma_addr_t gpd_addr; /* the physical address of gpd array */ ++ dma_addr_t bd_addr; /* the physical address of bd array */ ++ u32 used_gpd; /* the number of used gpd elements */ ++ u32 used_bd; /* the number of used bd elements */ ++}; ++ ++struct msdc_host ++{ ++ struct msdc_hw *hw; ++ ++ struct mmc_host *mmc; /* mmc structure */ ++ struct mmc_command *cmd; ++ struct mmc_data *data; ++ struct mmc_request *mrq; ++ int cmd_rsp; ++ int cmd_rsp_done; ++ int cmd_r1b_done; ++ ++ int error; ++ spinlock_t lock; /* mutex */ ++ struct semaphore sem; ++ ++ u32 blksz; /* host block size */ ++ u32 base; /* host base address */ ++ int id; /* host id */ ++ int pwr_ref; /* core power reference count */ ++ ++ u32 xfer_size; /* total transferred size */ ++ ++ struct msdc_dma dma; /* dma channel */ ++ u32 dma_addr; /* dma transfer address */ ++ u32 dma_left_size; /* dma transfer left size */ ++ u32 dma_xfer_size; /* dma transfer size in bytes */ ++ int dma_xfer; /* dma transfer mode */ ++ ++ u32 timeout_ns; /* data timeout ns */ ++ u32 timeout_clks; /* data timeout clks */ ++ ++ atomic_t abort; /* abort transfer */ ++ ++ int irq; /* host interrupt */ ++ ++ struct tasklet_struct card_tasklet; ++ ++ struct completion cmd_done; ++ struct completion xfer_done; ++ struct pm_message pm_state; ++ ++ u32 mclk; /* mmc subsystem clock */ ++ u32 hclk; /* host clock speed */ ++ u32 sclk; /* SD/MS clock speed */ ++ u8 core_clkon; /* Host core clock on ? */ ++ u8 card_clkon; /* Card clock on ? */ ++ u8 core_power; /* core power */ ++ u8 power_mode; /* host power mode */ ++ u8 card_inserted; /* card inserted ? */ ++ u8 suspend; /* host suspended ? */ ++ u8 reserved; ++ u8 app_cmd; /* for app command */ ++ u32 app_cmd_arg; ++ u64 starttime; ++}; ++ ++static inline unsigned int uffs(unsigned int x) ++{ ++ unsigned int r = 1; ++ ++ if (!x) ++ return 0; ++ if (!(x & 0xffff)) { ++ x >>= 16; ++ r += 16; ++ } ++ if (!(x & 0xff)) { ++ x >>= 8; ++ r += 8; ++ } ++ if (!(x & 0xf)) { ++ x >>= 4; ++ r += 4; ++ } ++ if (!(x & 3)) { ++ x >>= 2; ++ r += 2; ++ } ++ if (!(x & 1)) { ++ x >>= 1; ++ r += 1; ++ } ++ return r; ++} ++#define sdr_read8(reg) __raw_readb(reg) ++#define sdr_read16(reg) __raw_readw(reg) ++#define sdr_read32(reg) __raw_readl(reg) ++#define sdr_write8(reg,val) __raw_writeb(val,reg) ++#define sdr_write16(reg,val) __raw_writew(val,reg) ++#define sdr_write32(reg,val) __raw_writel(val,reg) ++ ++#define sdr_set_bits(reg,bs) ((*(volatile u32*)(reg)) |= (u32)(bs)) ++#define sdr_clr_bits(reg,bs) ((*(volatile u32*)(reg)) &= ~((u32)(bs))) ++ ++#define sdr_set_field(reg,field,val) \ ++ do { \ ++ volatile unsigned int tv = sdr_read32(reg); \ ++ tv &= ~(field); \ ++ tv |= ((val) << (uffs((unsigned int)field) - 1)); \ ++ sdr_write32(reg,tv); \ ++ } while(0) ++#define sdr_get_field(reg,field,val) \ ++ do { \ ++ volatile unsigned int tv = sdr_read32(reg); \ ++ val = ((tv & (field)) >> (uffs((unsigned int)field) - 1)); \ ++ } while(0) ++ ++#endif ++ +diff --git a/drivers/mmc/host/sdhci-mt7620.c b/drivers/mmc/host/sdhci-mt7620.c +new file mode 100644 +index 0000000..a3cb5e4 +--- /dev/null ++++ b/drivers/mmc/host/sdhci-mt7620.c +@@ -0,0 +1,2314 @@ ++/* Copyright Statement: ++ * ++ * This software/firmware and related documentation ("MediaTek Software") are ++ * protected under relevant copyright laws. The information contained herein ++ * is confidential and proprietary to MediaTek Inc. and/or its licensors. ++ * Without the prior written permission of MediaTek inc. and/or its licensors, ++ * any reproduction, modification, use or disclosure of MediaTek Software, ++ * and information contained herein, in whole or in part, shall be strictly prohibited. ++ * ++ * MediaTek Inc. (C) 2010. All rights reserved. ++ * ++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES ++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") ++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON ++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. ++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR ++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH ++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES ++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES ++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK ++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR ++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND ++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, ++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, ++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO ++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. ++ * ++ * The following software/firmware and/or related documentation ("MediaTek Software") ++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's ++ * applicable license agreements with MediaTek Inc. ++ */ ++ ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/init.h> ++#include <linux/spinlock.h> ++#include <linux/timer.h> ++#include <linux/ioport.h> ++#include <linux/device.h> ++#include <linux/platform_device.h> ++#include <linux/of_platform.h> ++#include <linux/interrupt.h> ++#include <linux/delay.h> ++#include <linux/blkdev.h> ++#include <linux/slab.h> ++#include <linux/mmc/host.h> ++#include <linux/mmc/card.h> ++#include <linux/mmc/core.h> ++#include <linux/mmc/mmc.h> ++#include <linux/mmc/sd.h> ++#include <linux/mmc/sdio.h> ++#include <linux/dma-mapping.h> ++ ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <linux/version.h> ++#include <linux/pm.h> ++ ++#define MSDC_SMPL_FALLING (1) ++#define MSDC_CD_PIN_EN (1 << 0) /* card detection pin is wired */ ++#define MSDC_WP_PIN_EN (1 << 1) /* write protection pin is wired */ ++#define MSDC_REMOVABLE (1 << 5) /* removable slot */ ++#define MSDC_SYS_SUSPEND (1 << 6) /* suspended by system */ ++#define MSDC_HIGHSPEED (1 << 7) ++ ++#define IRQ_SDC 22 ++ ++#include <asm/dma.h> ++ ++#include "mt6575_sd.h" ++ ++#define DRV_NAME "mtk-sd" ++ ++#define HOST_MAX_NUM (1) /* +/- by chhung */ ++ ++#define HOST_MAX_MCLK (48000000) /* +/- by chhung */ ++#define HOST_MIN_MCLK (260000) ++ ++#define HOST_MAX_BLKSZ (2048) ++ ++#define MSDC_OCR_AVAIL (MMC_VDD_28_29 | MMC_VDD_29_30 | MMC_VDD_30_31 | MMC_VDD_31_32 | MMC_VDD_32_33) ++ ++#define GPIO_PULL_DOWN (0) ++#define GPIO_PULL_UP (1) ++ ++#define DEFAULT_DEBOUNCE (8) /* 8 cycles */ ++#define DEFAULT_DTOC (40) /* data timeout counter. 65536x40 sclk. */ ++ ++#define CMD_TIMEOUT (HZ/10) /* 100ms */ ++#define DAT_TIMEOUT (HZ/2 * 5) /* 500ms x5 */ ++ ++#define MAX_DMA_CNT (64 * 1024 - 512) /* a single transaction for WIFI may be 50K*/ ++ ++#define MAX_GPD_NUM (1 + 1) /* one null gpd */ ++#define MAX_BD_NUM (1024) ++#define MAX_BD_PER_GPD (MAX_BD_NUM) ++ ++#define MAX_HW_SGMTS (MAX_BD_NUM) ++#define MAX_PHY_SGMTS (MAX_BD_NUM) ++#define MAX_SGMT_SZ (MAX_DMA_CNT) ++#define MAX_REQ_SZ (MAX_SGMT_SZ * 8) ++ ++#ifdef MT6575_SD_DEBUG ++static struct msdc_regs *msdc_reg[HOST_MAX_NUM]; ++#endif ++ ++//================================= ++#define PERI_MSDC0_PDN (15) ++//#define PERI_MSDC1_PDN (16) ++//#define PERI_MSDC2_PDN (17) ++//#define PERI_MSDC3_PDN (18) ++ ++struct msdc_host *msdc_6575_host[] = {NULL,NULL,NULL,NULL}; ++ ++struct msdc_hw msdc0_hw = { ++ .clk_src = 0, ++ .cmd_edge = MSDC_SMPL_FALLING, ++ .data_edge = MSDC_SMPL_FALLING, ++ .clk_drv = 4, ++ .cmd_drv = 4, ++ .dat_drv = 4, ++ .data_pins = 4, ++ .data_offset = 0, ++ .flags = MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED, ++}; ++ ++static struct resource mtk_sd_resources[] = { ++ [0] = { ++ .start = 0xb0130000, ++ .end = 0xb0133fff, ++ .flags = IORESOURCE_MEM, ++ }, ++ [1] = { ++ .start = IRQ_SDC, /*FIXME*/ ++ .end = IRQ_SDC, /*FIXME*/ ++ .flags = IORESOURCE_IRQ, ++ }, ++}; ++ ++static struct platform_device mtk_sd_device = { ++ .name = "mtk-sd", ++ .id = 0, ++ .num_resources = ARRAY_SIZE(mtk_sd_resources), ++ .resource = mtk_sd_resources, ++}; ++/* end of +++ */ ++ ++static int msdc_rsp[] = { ++ 0, /* RESP_NONE */ ++ 1, /* RESP_R1 */ ++ 2, /* RESP_R2 */ ++ 3, /* RESP_R3 */ ++ 4, /* RESP_R4 */ ++ 1, /* RESP_R5 */ ++ 1, /* RESP_R6 */ ++ 1, /* RESP_R7 */ ++ 7, /* RESP_R1b */ ++}; ++ ++/* For Inhanced DMA */ ++#define msdc_init_gpd_ex(gpd,extlen,cmd,arg,blknum) \ ++ do { \ ++ ((gpd_t*)gpd)->extlen = extlen; \ ++ ((gpd_t*)gpd)->cmd = cmd; \ ++ ((gpd_t*)gpd)->arg = arg; \ ++ ((gpd_t*)gpd)->blknum = blknum; \ ++ }while(0) ++ ++#define msdc_init_bd(bd, blkpad, dwpad, dptr, dlen) \ ++ do { \ ++ BUG_ON(dlen > 0xFFFFUL); \ ++ ((bd_t*)bd)->blkpad = blkpad; \ ++ ((bd_t*)bd)->dwpad = dwpad; \ ++ ((bd_t*)bd)->ptr = (void*)dptr; \ ++ ((bd_t*)bd)->buflen = dlen; \ ++ }while(0) ++ ++#define msdc_txfifocnt() ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_TXCNT) >> 16) ++#define msdc_rxfifocnt() ((sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_RXCNT) >> 0) ++#define msdc_fifo_write32(v) sdr_write32(MSDC_TXDATA, (v)) ++#define msdc_fifo_write8(v) sdr_write8(MSDC_TXDATA, (v)) ++#define msdc_fifo_read32() sdr_read32(MSDC_RXDATA) ++#define msdc_fifo_read8() sdr_read8(MSDC_RXDATA) ++ ++ ++#define msdc_dma_on() sdr_clr_bits(MSDC_CFG, MSDC_CFG_PIO) ++#define msdc_dma_off() sdr_set_bits(MSDC_CFG, MSDC_CFG_PIO) ++ ++#define msdc_retry(expr,retry,cnt) \ ++ do { \ ++ int backup = cnt; \ ++ while (retry) { \ ++ if (!(expr)) break; \ ++ if (cnt-- == 0) { \ ++ retry--; mdelay(1); cnt = backup; \ ++ } \ ++ } \ ++ WARN_ON(retry == 0); \ ++ } while(0) ++ ++#if 0 /* +/- chhung */ ++#define msdc_reset() \ ++ do { \ ++ int retry = 3, cnt = 1000; \ ++ sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \ ++ dsb(); \ ++ msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \ ++ } while(0) ++#else ++#define msdc_reset() \ ++ do { \ ++ int retry = 3, cnt = 1000; \ ++ sdr_set_bits(MSDC_CFG, MSDC_CFG_RST); \ ++ msdc_retry(sdr_read32(MSDC_CFG) & MSDC_CFG_RST, retry, cnt); \ ++ } while(0) ++#endif /* end of +/- */ ++ ++#define msdc_clr_int() \ ++ do { \ ++ volatile u32 val = sdr_read32(MSDC_INT); \ ++ sdr_write32(MSDC_INT, val); \ ++ } while(0) ++ ++#define msdc_clr_fifo() \ ++ do { \ ++ int retry = 3, cnt = 1000; \ ++ sdr_set_bits(MSDC_FIFOCS, MSDC_FIFOCS_CLR); \ ++ msdc_retry(sdr_read32(MSDC_FIFOCS) & MSDC_FIFOCS_CLR, retry, cnt); \ ++ } while(0) ++ ++#define msdc_irq_save(val) \ ++ do { \ ++ val = sdr_read32(MSDC_INTEN); \ ++ sdr_clr_bits(MSDC_INTEN, val); \ ++ } while(0) ++ ++#define msdc_irq_restore(val) \ ++ do { \ ++ sdr_set_bits(MSDC_INTEN, val); \ ++ } while(0) ++ ++/* clock source for host: global */ ++static u32 hclks[] = {48000000}; /* +/- by chhung */ ++ ++//============================================ ++// the power for msdc host controller: global ++// always keep the VMC on. ++//============================================ ++#define msdc_vcore_on(host) \ ++ do { \ ++ printk("[+]VMC ref. count<%d>\n", ++host->pwr_ref); \ ++ (void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD"); \ ++ } while (0) ++#define msdc_vcore_off(host) \ ++ do { \ ++ printk("[-]VMC ref. count<%d>\n", --host->pwr_ref); \ ++ (void)hwPowerDown(MT65XX_POWER_LDO_VMC, "SD"); \ ++ } while (0) ++ ++//==================================== ++// the vdd output for card: global ++// always keep the VMCH on. ++//==================================== ++#define msdc_vdd_on(host) \ ++ do { \ ++ (void)hwPowerOn(MT65XX_POWER_LDO_VMCH, VOL_3300, "SD"); \ ++ } while (0) ++#define msdc_vdd_off(host) \ ++ do { \ ++ (void)hwPowerDown(MT65XX_POWER_LDO_VMCH, "SD"); \ ++ } while (0) ++ ++#define sdc_is_busy() (sdr_read32(SDC_STS) & SDC_STS_SDCBUSY) ++#define sdc_is_cmd_busy() (sdr_read32(SDC_STS) & SDC_STS_CMDBUSY) ++ ++#define sdc_send_cmd(cmd,arg) \ ++ do { \ ++ sdr_write32(SDC_ARG, (arg)); \ ++ sdr_write32(SDC_CMD, (cmd)); \ ++ } while(0) ++ ++// can modify to read h/w register. ++//#define is_card_present(h) ((sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1); ++#define is_card_present(h) (((struct msdc_host*)(h))->card_inserted) ++ ++/* +++ chhung */ ++#ifndef __ASSEMBLY__ ++#define PHYSADDR(a) (((unsigned long)(a)) & 0x1fffffff) ++#else ++#define PHYSADDR(a) ((a) & 0x1fffffff) ++#endif ++/* end of +++ */ ++static unsigned int msdc_do_command(struct msdc_host *host, ++ struct mmc_command *cmd, ++ int tune, ++ unsigned long timeout); ++ ++static int msdc_tune_cmdrsp(struct msdc_host*host,struct mmc_command *cmd); ++ ++#ifdef MT6575_SD_DEBUG ++static void msdc_dump_card_status(struct msdc_host *host, u32 status) ++{ ++ static char *state[] = { ++ "Idle", /* 0 */ ++ "Ready", /* 1 */ ++ "Ident", /* 2 */ ++ "Stby", /* 3 */ ++ "Tran", /* 4 */ ++ "Data", /* 5 */ ++ "Rcv", /* 6 */ ++ "Prg", /* 7 */ ++ "Dis", /* 8 */ ++ "Reserved", /* 9 */ ++ "Reserved", /* 10 */ ++ "Reserved", /* 11 */ ++ "Reserved", /* 12 */ ++ "Reserved", /* 13 */ ++ "Reserved", /* 14 */ ++ "I/O mode", /* 15 */ ++ }; ++ if (status & R1_OUT_OF_RANGE) ++ printk("[CARD_STATUS] Out of Range\n"); ++ if (status & R1_ADDRESS_ERROR) ++ printk("[CARD_STATUS] Address Error\n"); ++ if (status & R1_BLOCK_LEN_ERROR) ++ printk("[CARD_STATUS] Block Len Error\n"); ++ if (status & R1_ERASE_SEQ_ERROR) ++ printk("[CARD_STATUS] Erase Seq Error\n"); ++ if (status & R1_ERASE_PARAM) ++ printk("[CARD_STATUS] Erase Param\n"); ++ if (status & R1_WP_VIOLATION) ++ printk("[CARD_STATUS] WP Violation\n"); ++ if (status & R1_CARD_IS_LOCKED) ++ printk("[CARD_STATUS] Card is Locked\n"); ++ if (status & R1_LOCK_UNLOCK_FAILED) ++ printk("[CARD_STATUS] Lock/Unlock Failed\n"); ++ if (status & R1_COM_CRC_ERROR) ++ printk("[CARD_STATUS] Command CRC Error\n"); ++ if (status & R1_ILLEGAL_COMMAND) ++ printk("[CARD_STATUS] Illegal Command\n"); ++ if (status & R1_CARD_ECC_FAILED) ++ printk("[CARD_STATUS] Card ECC Failed\n"); ++ if (status & R1_CC_ERROR) ++ printk("[CARD_STATUS] CC Error\n"); ++ if (status & R1_ERROR) ++ printk("[CARD_STATUS] Error\n"); ++ if (status & R1_UNDERRUN) ++ printk("[CARD_STATUS] Underrun\n"); ++ if (status & R1_OVERRUN) ++ printk("[CARD_STATUS] Overrun\n"); ++ if (status & R1_CID_CSD_OVERWRITE) ++ printk("[CARD_STATUS] CID/CSD Overwrite\n"); ++ if (status & R1_WP_ERASE_SKIP) ++ printk("[CARD_STATUS] WP Eraser Skip\n"); ++ if (status & R1_CARD_ECC_DISABLED) ++ printk("[CARD_STATUS] Card ECC Disabled\n"); ++ if (status & R1_ERASE_RESET) ++ printk("[CARD_STATUS] Erase Reset\n"); ++ if (status & R1_READY_FOR_DATA) ++ printk("[CARD_STATUS] Ready for Data\n"); ++ if (status & R1_SWITCH_ERROR) ++ printk("[CARD_STATUS] Switch error\n"); ++ if (status & R1_APP_CMD) ++ printk("[CARD_STATUS] App Command\n"); ++ ++ printk("[CARD_STATUS] '%s' State\n", state[R1_CURRENT_STATE(status)]); ++} ++ ++static void msdc_dump_ocr_reg(struct msdc_host *host, u32 resp) ++{ ++ if (resp & (1 << 7)) ++ printk("[OCR] Low Voltage Range\n"); ++ if (resp & (1 << 15)) ++ printk("[OCR] 2.7-2.8 volt\n"); ++ if (resp & (1 << 16)) ++ printk("[OCR] 2.8-2.9 volt\n"); ++ if (resp & (1 << 17)) ++ printk("[OCR] 2.9-3.0 volt\n"); ++ if (resp & (1 << 18)) ++ printk("[OCR] 3.0-3.1 volt\n"); ++ if (resp & (1 << 19)) ++ printk("[OCR] 3.1-3.2 volt\n"); ++ if (resp & (1 << 20)) ++ printk("[OCR] 3.2-3.3 volt\n"); ++ if (resp & (1 << 21)) ++ printk("[OCR] 3.3-3.4 volt\n"); ++ if (resp & (1 << 22)) ++ printk("[OCR] 3.4-3.5 volt\n"); ++ if (resp & (1 << 23)) ++ printk("[OCR] 3.5-3.6 volt\n"); ++ if (resp & (1 << 24)) ++ printk("[OCR] Switching to 1.8V Accepted (S18A)\n"); ++ if (resp & (1 << 30)) ++ printk("[OCR] Card Capacity Status (CCS)\n"); ++ if (resp & (1 << 31)) ++ printk("[OCR] Card Power Up Status (Idle)\n"); ++ else ++ printk("[OCR] Card Power Up Status (Busy)\n"); ++} ++ ++static void msdc_dump_rca_resp(struct msdc_host *host, u32 resp) ++{ ++ u32 status = (((resp >> 15) & 0x1) << 23) | ++ (((resp >> 14) & 0x1) << 22) | ++ (((resp >> 13) & 0x1) << 19) | ++ (resp & 0x1fff); ++ ++ printk("[RCA] 0x%.4x\n", resp >> 16); ++ ++ msdc_dump_card_status(host, status); ++} ++ ++static void msdc_dump_io_resp(struct msdc_host *host, u32 resp) ++{ ++ u32 flags = (resp >> 8) & 0xFF; ++ char *state[] = {"DIS", "CMD", "TRN", "RFU"}; ++ ++ if (flags & (1 << 7)) ++ printk("[IO] COM_CRC_ERR\n"); ++ if (flags & (1 << 6)) ++ printk("[IO] Illgal command\n"); ++ if (flags & (1 << 3)) ++ printk("[IO] Error\n"); ++ if (flags & (1 << 2)) ++ printk("[IO] RFU\n"); ++ if (flags & (1 << 1)) ++ printk("[IO] Function number error\n"); ++ if (flags & (1 << 0)) ++ printk("[IO] Out of range\n"); ++ ++ printk("[IO] State: %s, Data:0x%x\n", state[(resp >> 12) & 0x3], resp & 0xFF); ++} ++#endif ++ ++static void msdc_set_timeout(struct msdc_host *host, u32 ns, u32 clks) ++{ ++ u32 base = host->base; ++ u32 timeout, clk_ns; ++ ++ host->timeout_ns = ns; ++ host->timeout_clks = clks; ++ ++ clk_ns = 1000000000UL / host->sclk; ++ timeout = ns / clk_ns + clks; ++ timeout = timeout >> 16; /* in 65536 sclk cycle unit */ ++ timeout = timeout > 1 ? timeout - 1 : 0; ++ timeout = timeout > 255 ? 255 : timeout; ++ ++ sdr_set_field(SDC_CFG, SDC_CFG_DTOC, timeout); ++ ++/* printk("Set read data timeout: %dns %dclks -> %d x 65536 cycles\n", ++ ns, clks, timeout + 1);*/ ++} ++ ++static void msdc_eirq_sdio(void *data) ++{ ++ struct msdc_host *host = (struct msdc_host *)data; ++ ++// printk("SDIO EINT\n"); ++ ++ mmc_signal_sdio_irq(host->mmc); ++} ++ ++static void msdc_eirq_cd(void *data) ++{ ++ struct msdc_host *host = (struct msdc_host *)data; ++ ++// printk("CD EINT\n"); ++ ++ tasklet_hi_schedule(&host->card_tasklet); ++} ++ ++static void msdc_tasklet_card(unsigned long arg) ++{ ++ struct msdc_host *host = (struct msdc_host *)arg; ++ struct msdc_hw *hw = host->hw; ++ u32 base = host->base; ++ u32 inserted; ++ u32 status = 0; ++ ++ spin_lock(&host->lock); ++ ++ if (hw->get_cd_status) { ++ inserted = hw->get_cd_status(); ++ } else { ++ status = sdr_read32(MSDC_PS); ++ inserted = (status & MSDC_PS_CDSTS) ? 0 : 1; ++ } ++ ++ host->card_inserted = inserted; ++ ++ if (!host->suspend) { ++ host->mmc->f_max = HOST_MAX_MCLK; ++ mmc_detect_change(host->mmc, msecs_to_jiffies(20)); ++ } ++ ++// printk("card found<%s>\n", inserted ? "inserted" : "removed"); ++ ++ spin_unlock(&host->lock); ++} ++ ++static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz) ++{ ++ u32 base = host->base; ++ u32 hclk = host->hclk; ++ u32 mode, flags, div, sclk; ++ ++ if (!hz) { ++// printk("set mclk to 0!!!\n"); ++ msdc_reset(); ++ return; ++ } ++ ++ msdc_irq_save(flags); ++ ++ if (ddr) { ++ mode = 0x2; ++ if (hz >= (hclk >> 2)) { ++ div = 1; ++ sclk = hclk >> 2; ++ } else { ++ div = (hclk + ((hz << 2) - 1)) / (hz << 2); ++ sclk = (hclk >> 2) / div; ++ } ++ } else if (hz >= hclk) { ++ mode = 0x1; ++ div = 0; ++ sclk = hclk; ++ } else { ++ mode = 0x0; ++ if (hz >= (hclk >> 1)) { ++ div = 0; ++ sclk = hclk >> 1; ++ } else { ++ div = (hclk + ((hz << 2) - 1)) / (hz << 2); ++ sclk = (hclk >> 2) / div; ++ } ++ } ++ ++ sdr_set_field(MSDC_CFG, MSDC_CFG_CKMOD, mode); ++ sdr_set_field(MSDC_CFG, MSDC_CFG_CKDIV, div); ++ ++ while (!(sdr_read32(MSDC_CFG) & MSDC_CFG_CKSTB)); ++ ++ host->sclk = sclk; ++ host->mclk = hz; ++ msdc_set_timeout(host, host->timeout_ns, host->timeout_clks); ++ ++/* printk("!!! Set<%dKHz> Source<%dKHz> -> sclk<%dKHz>\n", ++ hz / 1000, hclk / 1000, sclk / 1000); ++*/ ++ msdc_irq_restore(flags); ++} ++ ++static void msdc_abort_data(struct msdc_host *host) ++{ ++ u32 base = host->base; ++ struct mmc_command *stop = host->mrq->stop; ++ ++// printk("Need to Abort. dma<%d>\n", host->dma_xfer); ++ ++ msdc_reset(); ++ msdc_clr_fifo(); ++ msdc_clr_int(); ++ ++ if (stop) { ++// printk("stop when abort CMD<%d>\n", stop->opcode); ++ msdc_do_command(host, stop, 0, CMD_TIMEOUT); ++ } ++} ++ ++static unsigned int msdc_command_start(struct msdc_host *host, ++ struct mmc_command *cmd, int tune, unsigned long timeout) ++{ ++ u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO | ++ MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO | ++ MSDC_INT_ACMD19_DONE; ++ u32 base = host->base; ++ u32 opcode = cmd->opcode; ++ u32 rawcmd; ++ u32 resp; ++ unsigned long tmo; ++ ++ if (opcode == MMC_SEND_OP_COND || opcode == SD_APP_OP_COND) ++ resp = RESP_R3; ++ else if (opcode == MMC_SET_RELATIVE_ADDR || opcode == SD_SEND_RELATIVE_ADDR) ++ resp = (mmc_cmd_type(cmd) == MMC_CMD_BCR) ? RESP_R6 : RESP_R1; ++ else if (opcode == MMC_FAST_IO) ++ resp = RESP_R4; ++ else if (opcode == MMC_GO_IRQ_STATE) ++ resp = RESP_R5; ++ else if (opcode == MMC_SELECT_CARD) ++ resp = (cmd->arg != 0) ? RESP_R1B : RESP_NONE; ++ else if (opcode == SD_IO_RW_DIRECT || opcode == SD_IO_RW_EXTENDED) ++ resp = RESP_R1; ++ else if (opcode == SD_SEND_IF_COND && (mmc_cmd_type(cmd) == MMC_CMD_BCR)) ++ resp = RESP_R1; ++ else { ++ switch (mmc_resp_type(cmd)) { ++ case MMC_RSP_R1: ++ resp = RESP_R1; ++ break; ++ case MMC_RSP_R1B: ++ resp = RESP_R1B; ++ break; ++ case MMC_RSP_R2: ++ resp = RESP_R2; ++ break; ++ case MMC_RSP_R3: ++ resp = RESP_R3; ++ break; ++ case MMC_RSP_NONE: ++ default: ++ resp = RESP_NONE; ++ break; ++ } ++ } ++ ++ cmd->error = 0; ++ rawcmd = opcode | msdc_rsp[resp] << 7 | host->blksz << 16; ++ ++ if (opcode == MMC_READ_MULTIPLE_BLOCK) { ++ rawcmd |= (2 << 11); ++ } else if (opcode == MMC_READ_SINGLE_BLOCK) { ++ rawcmd |= (1 << 11); ++ } else if (opcode == MMC_WRITE_MULTIPLE_BLOCK) { ++ rawcmd |= ((2 << 11) | (1 << 13)); ++ } else if (opcode == MMC_WRITE_BLOCK) { ++ rawcmd |= ((1 << 11) | (1 << 13)); ++ } else if (opcode == SD_IO_RW_EXTENDED) { ++ if (cmd->data->flags & MMC_DATA_WRITE) ++ rawcmd |= (1 << 13); ++ if (cmd->data->blocks > 1) ++ rawcmd |= (2 << 11); ++ else ++ rawcmd |= (1 << 11); ++ } else if (opcode == SD_IO_RW_DIRECT && cmd->flags == (unsigned int)-1) { ++ rawcmd |= (1 << 14); ++ } else if ((opcode == SD_APP_SEND_SCR) || ++ (opcode == SD_APP_SEND_NUM_WR_BLKS) || ++ (opcode == SD_SWITCH && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) || ++ (opcode == SD_APP_SD_STATUS && (mmc_cmd_type(cmd) == MMC_CMD_ADTC)) || ++ (opcode == MMC_SEND_EXT_CSD && (mmc_cmd_type(cmd) == MMC_CMD_ADTC))) { ++ rawcmd |= (1 << 11); ++ } else if (opcode == MMC_STOP_TRANSMISSION) { ++ rawcmd |= (1 << 14); ++ rawcmd &= ~(0x0FFF << 16); ++ } ++ ++// printk("CMD<%d><0x%.8x> Arg<0x%.8x>\n", opcode , rawcmd, cmd->arg); ++ ++ tmo = jiffies + timeout; ++ ++ if (opcode == MMC_SEND_STATUS) { ++ for (;;) { ++ if (!sdc_is_cmd_busy()) ++ break; ++ ++ if (time_after(jiffies, tmo)) { ++ //printk("XXX cmd_busy timeout: before CMD<%d>\n", opcode); ++ cmd->error = (unsigned int)-ETIMEDOUT; ++ msdc_reset(); ++ goto end; ++ } ++ } ++ } else { ++ for (;;) { ++ if (!sdc_is_busy()) ++ break; ++ if (time_after(jiffies, tmo)) { ++ //printk("XXX sdc_busy timeout: before CMD<%d>\n", opcode); ++ cmd->error = (unsigned int)-ETIMEDOUT; ++ msdc_reset(); ++ goto end; ++ } ++ } ++ } ++ ++ //BUG_ON(in_interrupt()); ++ host->cmd = cmd; ++ host->cmd_rsp = resp; ++ init_completion(&host->cmd_done); ++ sdr_set_bits(MSDC_INTEN, wints); ++ sdc_send_cmd(rawcmd, cmd->arg); ++ ++end: ++ return cmd->error; ++} ++ ++static unsigned int msdc_command_resp(struct msdc_host *host, struct mmc_command *cmd, ++ int tune, unsigned long timeout) ++{ ++ u32 base = host->base; ++ //u32 opcode = cmd->opcode; ++ u32 resp; ++ u32 wints = MSDC_INT_CMDRDY | MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO | ++ MSDC_INT_ACMDRDY | MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO | ++ MSDC_INT_ACMD19_DONE; ++ ++ resp = host->cmd_rsp; ++ ++ BUG_ON(in_interrupt()); ++ spin_unlock(&host->lock); ++ if (!wait_for_completion_timeout(&host->cmd_done, 10*timeout)) { ++ //printk("XXX CMD<%d> wait_for_completion timeout ARG<0x%.8x>\n", opcode, cmd->arg); ++ cmd->error = (unsigned int)-ETIMEDOUT; ++ msdc_reset(); ++ } ++ spin_lock(&host->lock); ++ ++ sdr_clr_bits(MSDC_INTEN, wints); ++ host->cmd = NULL; ++ ++ if (!tune) ++ return cmd->error; ++ ++ /* memory card CRC */ ++ if (host->hw->flags & MSDC_REMOVABLE && cmd->error == (unsigned int)(-EIO) ) { ++ if (sdr_read32(SDC_CMD) & 0x1800) { ++ msdc_abort_data(host); ++ } else { ++ msdc_reset(); ++ msdc_clr_fifo(); ++ msdc_clr_int(); ++ } ++ cmd->error = msdc_tune_cmdrsp(host,cmd); ++ } ++ ++ return cmd->error; ++} ++ ++static unsigned int msdc_do_command(struct msdc_host *host, struct mmc_command *cmd, ++ int tune, unsigned long timeout) ++{ ++ if (!msdc_command_start(host, cmd, tune, timeout)) ++ msdc_command_resp(host, cmd, tune, timeout); ++ ++ //printk(" return<%d> resp<0x%.8x>\n", cmd->error, cmd->resp[0]); ++ return cmd->error; ++} ++ ++static int msdc_pio_abort(struct msdc_host *host, struct mmc_data *data, unsigned long tmo) ++{ ++ u32 base = host->base; ++ int ret = 0; ++ ++ if (atomic_read(&host->abort)) ++ ret = 1; ++ ++ if (time_after(jiffies, tmo)) { ++ data->error = (unsigned int)-ETIMEDOUT; ++ //printk("XXX PIO Data Timeout: CMD<%d>\n", host->mrq->cmd->opcode); ++ ret = 1; ++ } ++ ++ if (ret) { ++ msdc_reset(); ++ msdc_clr_fifo(); ++ msdc_clr_int(); ++ //printk("msdc pio find abort\n"); ++ } ++ ++ return ret; ++} ++ ++static int msdc_pio_read(struct msdc_host *host, struct mmc_data *data) ++{ ++ struct scatterlist *sg = data->sg; ++ u32 base = host->base; ++ u32 num = data->sg_len; ++ u32 *ptr; ++ u8 *u8ptr; ++ u32 left; ++ u32 count, size = 0; ++ u32 wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR; ++ unsigned long tmo = jiffies + DAT_TIMEOUT; ++ ++ sdr_set_bits(MSDC_INTEN, wints); ++ while (num) { ++ left = sg_dma_len(sg); ++ ptr = sg_virt(sg); ++ while (left) { ++ if ((left >= MSDC_FIFO_THD) && (msdc_rxfifocnt() >= MSDC_FIFO_THD)) { ++ count = MSDC_FIFO_THD >> 2; ++ do { ++ *ptr++ = msdc_fifo_read32(); ++ } while (--count); ++ left -= MSDC_FIFO_THD; ++ } else if ((left < MSDC_FIFO_THD) && msdc_rxfifocnt() >= left) { ++ while (left > 3) { ++ *ptr++ = msdc_fifo_read32(); ++ left -= 4; ++ } ++ ++ u8ptr = (u8 *)ptr; ++ while(left) { ++ * u8ptr++ = msdc_fifo_read8(); ++ left--; ++ } ++ } ++ ++ if (msdc_pio_abort(host, data, tmo)) ++ goto end; ++ } ++ size += sg_dma_len(sg); ++ sg = sg_next(sg); num--; ++ } ++end: ++ data->bytes_xfered += size; ++ //printk(" PIO Read<%d>bytes\n", size); ++ ++ sdr_clr_bits(MSDC_INTEN, wints); ++ if(data->error) ++ printk("read pio data->error<%d> left<%d> size<%d>\n", data->error, left, size); ++ ++ return data->error; ++} ++ ++static int msdc_pio_write(struct msdc_host* host, struct mmc_data *data) ++{ ++ u32 base = host->base; ++ struct scatterlist *sg = data->sg; ++ u32 num = data->sg_len; ++ u32 *ptr; ++ u8 *u8ptr; ++ u32 left; ++ u32 count, size = 0; ++ u32 wints = MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR; ++ unsigned long tmo = jiffies + DAT_TIMEOUT; ++ ++ sdr_set_bits(MSDC_INTEN, wints); ++ while (num) { ++ left = sg_dma_len(sg); ++ ptr = sg_virt(sg); ++ ++ while (left) { ++ if (left >= MSDC_FIFO_SZ && msdc_txfifocnt() == 0) { ++ count = MSDC_FIFO_SZ >> 2; ++ do { ++ msdc_fifo_write32(*ptr); ptr++; ++ } while (--count); ++ left -= MSDC_FIFO_SZ; ++ } else if (left < MSDC_FIFO_SZ && msdc_txfifocnt() == 0) { ++ while (left > 3) { ++ msdc_fifo_write32(*ptr); ptr++; ++ left -= 4; ++ } ++ ++ u8ptr = (u8*)ptr; ++ while( left) { ++ msdc_fifo_write8(*u8ptr); ++ u8ptr++; ++ left--; ++ } ++ } ++ ++ if (msdc_pio_abort(host, data, tmo)) ++ goto end; ++ } ++ size += sg_dma_len(sg); ++ sg = sg_next(sg); num--; ++ } ++end: ++ data->bytes_xfered += size; ++ //printk(" PIO Write<%d>bytes\n", size); ++ if(data->error) ++ printk("write pio data->error<%d>\n", data->error); ++ ++ sdr_clr_bits(MSDC_INTEN, wints); ++ ++ return data->error; ++} ++ ++static void msdc_dma_start(struct msdc_host *host) ++{ ++ u32 base = host->base; ++ u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR; ++ ++ sdr_set_bits(MSDC_INTEN, wints); ++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_START, 1); ++ ++ //printk("DMA start\n"); ++} ++ ++static void msdc_dma_stop(struct msdc_host *host) ++{ ++ u32 base = host->base; ++ u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR; ++ ++ //printk("DMA status: 0x%.8x\n",sdr_read32(MSDC_DMA_CFG)); ++ ++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_STOP, 1); ++ while (sdr_read32(MSDC_DMA_CFG) & MSDC_DMA_CFG_STS); ++ sdr_clr_bits(MSDC_INTEN, wints); /* Not just xfer_comp */ ++ ++ //printk("DMA stop\n"); ++} ++ ++static u8 msdc_dma_calcs(u8 *buf, u32 len) ++{ ++ u32 i, sum = 0; ++ ++ for (i = 0; i < len; i++) ++ sum += buf[i]; ++ ++ return 0xFF - (u8)sum; ++} ++ ++static int msdc_dma_config(struct msdc_host *host, struct msdc_dma *dma) ++{ ++ u32 base = host->base; ++ u32 sglen = dma->sglen; ++ u32 j, num, bdlen; ++ u8 blkpad, dwpad, chksum; ++ struct scatterlist *sg = dma->sg; ++ gpd_t *gpd; ++ bd_t *bd; ++ ++ switch (dma->mode) { ++ case MSDC_MODE_DMA_BASIC: ++ BUG_ON(dma->xfersz > 65535); ++ BUG_ON(dma->sglen != 1); ++ sdr_write32(MSDC_DMA_SA, PHYSADDR(sg_dma_address(sg))); ++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_LASTBUF, 1); ++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_XFERSZ, sg_dma_len(sg)); ++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz); ++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 0); ++ break; ++ ++ case MSDC_MODE_DMA_DESC: ++ blkpad = (dma->flags & DMA_FLAG_PAD_BLOCK) ? 1 : 0; ++ dwpad = (dma->flags & DMA_FLAG_PAD_DWORD) ? 1 : 0; ++ chksum = (dma->flags & DMA_FLAG_EN_CHKSUM) ? 1 : 0; ++ ++ num = (sglen + MAX_BD_PER_GPD - 1) / MAX_BD_PER_GPD; ++ BUG_ON(num !=1 ); ++ ++ gpd = dma->gpd; ++ bd = dma->bd; ++ bdlen = sglen; ++ ++ gpd->hwo = 1; /* hw will clear it */ ++ gpd->bdp = 1; ++ gpd->chksum = 0; /* need to clear first. */ ++ gpd->chksum = (chksum ? msdc_dma_calcs((u8 *)gpd, 16) : 0); ++ ++ for (j = 0; j < bdlen; j++) { ++ msdc_init_bd(&bd[j], blkpad, dwpad, sg_dma_address(sg), sg_dma_len(sg)); ++ if( j == bdlen - 1) ++ bd[j].eol = 1; ++ else ++ bd[j].eol = 0; ++ bd[j].chksum = 0; /* checksume need to clear first */ ++ bd[j].chksum = (chksum ? msdc_dma_calcs((u8 *)(&bd[j]), 16) : 0); ++ sg++; ++ } ++ ++ dma->used_gpd += 2; ++ dma->used_bd += bdlen; ++ ++ sdr_set_field(MSDC_DMA_CFG, MSDC_DMA_CFG_DECSEN, chksum); ++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_BRUSTSZ, dma->burstsz); ++ sdr_set_field(MSDC_DMA_CTRL, MSDC_DMA_CTRL_MODE, 1); ++ sdr_write32(MSDC_DMA_SA, PHYSADDR((u32)dma->gpd_addr)); ++ break; ++ } ++ ++// printk("DMA_CTRL = 0x%x\n", sdr_read32(MSDC_DMA_CTRL)); ++// printk("DMA_CFG = 0x%x\n", sdr_read32(MSDC_DMA_CFG)); ++// printk("DMA_SA = 0x%x\n", sdr_read32(MSDC_DMA_SA)); ++ ++ return 0; ++} ++ ++static void msdc_dma_setup(struct msdc_host *host, struct msdc_dma *dma, ++ struct scatterlist *sg, unsigned int sglen) ++{ ++ BUG_ON(sglen > MAX_BD_NUM); ++ ++ dma->sg = sg; ++ dma->flags = DMA_FLAG_EN_CHKSUM; ++ dma->sglen = sglen; ++ dma->xfersz = host->xfer_size; ++ dma->burstsz = MSDC_BRUST_64B; ++ ++ if (sglen == 1 && sg_dma_len(sg) <= MAX_DMA_CNT) ++ dma->mode = MSDC_MODE_DMA_BASIC; ++ else ++ dma->mode = MSDC_MODE_DMA_DESC; ++ ++// printk("DMA mode<%d> sglen<%d> xfersz<%d>\n", dma->mode, dma->sglen, dma->xfersz); ++ ++ msdc_dma_config(host, dma); ++} ++ ++static void msdc_set_blknum(struct msdc_host *host, u32 blknum) ++{ ++ u32 base = host->base; ++ ++ sdr_write32(SDC_BLK_NUM, blknum); ++} ++ ++static int msdc_do_request(struct mmc_host*mmc, struct mmc_request*mrq) ++{ ++ struct msdc_host *host = mmc_priv(mmc); ++ struct mmc_command *cmd; ++ struct mmc_data *data; ++ u32 base = host->base; ++ unsigned int left=0; ++ int dma = 0, read = 1, dir = DMA_FROM_DEVICE, send_type=0; ++ ++#define SND_DAT 0 ++#define SND_CMD 1 ++ ++ BUG_ON(mmc == NULL); ++ BUG_ON(mrq == NULL); ++ ++ host->error = 0; ++ atomic_set(&host->abort, 0); ++ ++ cmd = mrq->cmd; ++ data = mrq->cmd->data; ++ ++ if (!data) { ++ send_type = SND_CMD; ++ if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0) ++ goto done; ++ } else { ++ BUG_ON(data->blksz > HOST_MAX_BLKSZ); ++ send_type=SND_DAT; ++ ++ data->error = 0; ++ read = data->flags & MMC_DATA_READ ? 1 : 0; ++ host->data = data; ++ host->xfer_size = data->blocks * data->blksz; ++ host->blksz = data->blksz; ++ ++ host->dma_xfer = dma = ((host->xfer_size >= 512) ? 1 : 0); ++ ++ if (read) ++ if ((host->timeout_ns != data->timeout_ns) || ++ (host->timeout_clks != data->timeout_clks)) ++ msdc_set_timeout(host, data->timeout_ns, data->timeout_clks); ++ ++ msdc_set_blknum(host, data->blocks); ++ ++ if (dma) { ++ msdc_dma_on(); ++ init_completion(&host->xfer_done); ++ ++ if (msdc_command_start(host, cmd, 1, CMD_TIMEOUT) != 0) ++ goto done; ++ ++ dir = read ? DMA_FROM_DEVICE : DMA_TO_DEVICE; ++ dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, dir); ++ msdc_dma_setup(host, &host->dma, data->sg, data->sg_len); ++ ++ if (msdc_command_resp(host, cmd, 1, CMD_TIMEOUT) != 0) ++ goto done; ++ ++ msdc_dma_start(host); ++ ++ spin_unlock(&host->lock); ++ if (!wait_for_completion_timeout(&host->xfer_done, DAT_TIMEOUT)) { ++ /*printk("XXX CMD<%d> wait xfer_done<%d> timeout!!\n", cmd->opcode, data->blocks * data->blksz); ++ printk(" DMA_SA = 0x%x\n", sdr_read32(MSDC_DMA_SA)); ++ printk(" DMA_CA = 0x%x\n", sdr_read32(MSDC_DMA_CA)); ++ printk(" DMA_CTRL = 0x%x\n", sdr_read32(MSDC_DMA_CTRL)); ++ printk(" DMA_CFG = 0x%x\n", sdr_read32(MSDC_DMA_CFG));*/ ++ data->error = (unsigned int)-ETIMEDOUT; ++ ++ msdc_reset(); ++ msdc_clr_fifo(); ++ msdc_clr_int(); ++ } ++ spin_lock(&host->lock); ++ msdc_dma_stop(host); ++ } else { ++ if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0) ++ goto done; ++ ++ if (read) { ++ if (msdc_pio_read(host, data)) ++ goto done; ++ } else { ++ if (msdc_pio_write(host, data)) ++ goto done; ++ } ++ ++ if (!read) { ++ while (1) { ++ left = msdc_txfifocnt(); ++ if (left == 0) { ++ break; ++ } ++ if (msdc_pio_abort(host, data, jiffies + DAT_TIMEOUT)) { ++ break; ++ /* Fix me: what about if data error, when stop ? how to? */ ++ } ++ } ++ } else { ++ /* Fix me: read case: need to check CRC error */ ++ } ++ ++ /* For write case: SDCBUSY and Xfer_Comp will assert when DAT0 not busy. ++ For read case : SDCBUSY and Xfer_Comp will assert when last byte read out from FIFO. ++ */ ++ ++ /* try not to wait xfer_comp interrupt. ++ the next command will check SDC_BUSY. ++ SDC_BUSY means xfer_comp assert ++ */ ++ ++ } // PIO mode ++ ++ /* Last: stop transfer */ ++ if (data->stop){ ++ if (msdc_do_command(host, data->stop, 0, CMD_TIMEOUT) != 0) { ++ goto done; ++ } ++ } ++ } ++ ++done: ++ if (data != NULL) { ++ host->data = NULL; ++ host->dma_xfer = 0; ++ if (dma != 0) { ++ msdc_dma_off(); ++ host->dma.used_bd = 0; ++ host->dma.used_gpd = 0; ++ dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, dir); ++ } ++ host->blksz = 0; ++ ++ // printk("CMD<%d> data<%s %s> blksz<%d> block<%d> error<%d>",cmd->opcode, (dma? "dma":"pio\n"), ++ // (read ? "read ":"write") ,data->blksz, data->blocks, data->error); ++ } ++ ++ if (mrq->cmd->error) host->error = 0x001; ++ if (mrq->data && mrq->data->error) host->error |= 0x010; ++ if (mrq->stop && mrq->stop->error) host->error |= 0x100; ++ ++ //if (host->error) printk("host->error<%d>\n", host->error); ++ ++ return host->error; ++} ++ ++static int msdc_app_cmd(struct mmc_host *mmc, struct msdc_host *host) ++{ ++ struct mmc_command cmd; ++ struct mmc_request mrq; ++ u32 err; ++ ++ memset(&cmd, 0, sizeof(struct mmc_command)); ++ cmd.opcode = MMC_APP_CMD; ++#if 0 /* bug: we meet mmc->card is null when ACMD6 */ ++ cmd.arg = mmc->card->rca << 16; ++#else ++ cmd.arg = host->app_cmd_arg; ++#endif ++ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC; ++ ++ memset(&mrq, 0, sizeof(struct mmc_request)); ++ mrq.cmd = &cmd; cmd.mrq = &mrq; ++ cmd.data = NULL; ++ ++ err = msdc_do_command(host, &cmd, 0, CMD_TIMEOUT); ++ return err; ++} ++ ++static int msdc_tune_cmdrsp(struct msdc_host*host, struct mmc_command *cmd) ++{ ++ int result = -1; ++ u32 base = host->base; ++ u32 rsmpl, cur_rsmpl, orig_rsmpl; ++ u32 rrdly, cur_rrdly = 0, orig_rrdly; ++ u32 skip = 1; ++ ++ /* ==== don't support 3.0 now ==== ++ 1: R_SMPL[1] ++ 2: PAD_CMD_RESP_RXDLY[26:22] ++ ==========================*/ ++ ++ // save the previous tune result ++ sdr_get_field(MSDC_IOCON, MSDC_IOCON_RSPL, orig_rsmpl); ++ sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, orig_rrdly); ++ ++ rrdly = 0; ++ do { ++ for (rsmpl = 0; rsmpl < 2; rsmpl++) { ++ /* Lv1: R_SMPL[1] */ ++ cur_rsmpl = (orig_rsmpl + rsmpl) % 2; ++ if (skip == 1) { ++ skip = 0; ++ continue; ++ } ++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, cur_rsmpl); ++ ++ if (host->app_cmd) { ++ result = msdc_app_cmd(host->mmc, host); ++ if (result) { ++ //printk("TUNE_CMD app_cmd<%d> failed: RESP_RXDLY<%d>,R_SMPL<%d>\n", ++ // host->mrq->cmd->opcode, cur_rrdly, cur_rsmpl); ++ continue; ++ } ++ } ++ result = msdc_do_command(host, cmd, 0, CMD_TIMEOUT); // not tune. ++ //printk("TUNE_CMD<%d> %s PAD_CMD_RESP_RXDLY[26:22]<%d> R_SMPL[1]<%d>\n", cmd->opcode, ++// (result == 0) ? "PASS" : "FAIL", cur_rrdly, cur_rsmpl); ++ ++ if (result == 0) { ++ return 0; ++ } ++ if (result != (unsigned int)(-EIO)) { ++ // printk("TUNE_CMD<%d> Error<%d> not -EIO\n", cmd->opcode, result); ++ return result; ++ } ++ ++ /* should be EIO */ ++ if (sdr_read32(SDC_CMD) & 0x1800) { /* check if has data phase */ ++ msdc_abort_data(host); ++ } ++ } ++ ++ /* Lv2: PAD_CMD_RESP_RXDLY[26:22] */ ++ cur_rrdly = (orig_rrdly + rrdly + 1) % 32; ++ sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_CMDRRDLY, cur_rrdly); ++ }while (++rrdly < 32); ++ ++ return result; ++} ++ ++/* Support SD2.0 Only */ ++static int msdc_tune_bread(struct mmc_host *mmc, struct mmc_request *mrq) ++{ ++ struct msdc_host *host = mmc_priv(mmc); ++ u32 base = host->base; ++ u32 ddr=0; ++ u32 dcrc = 0; ++ u32 rxdly, cur_rxdly0, cur_rxdly1; ++ u32 dsmpl, cur_dsmpl, orig_dsmpl; ++ u32 cur_dat0, cur_dat1, cur_dat2, cur_dat3; ++ u32 cur_dat4, cur_dat5, cur_dat6, cur_dat7; ++ u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3; ++ u32 orig_dat4, orig_dat5, orig_dat6, orig_dat7; ++ int result = -1; ++ u32 skip = 1; ++ ++ sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, orig_dsmpl); ++ ++ /* Tune Method 2. */ ++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1); ++ ++ rxdly = 0; ++ do { ++ for (dsmpl = 0; dsmpl < 2; dsmpl++) { ++ cur_dsmpl = (orig_dsmpl + dsmpl) % 2; ++ if (skip == 1) { ++ skip = 0; ++ continue; ++ } ++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl); ++ ++ if (host->app_cmd) { ++ result = msdc_app_cmd(host->mmc, host); ++ if (result) { ++ //printk("TUNE_BREAD app_cmd<%d> failed\n", host->mrq->cmd->opcode); ++ continue; ++ } ++ } ++ result = msdc_do_request(mmc,mrq); ++ ++ sdr_get_field(SDC_DCRC_STS, SDC_DCRC_STS_POS|SDC_DCRC_STS_NEG, dcrc); /* RO */ ++ if (!ddr) dcrc &= ~SDC_DCRC_STS_NEG; ++ //printk("TUNE_BREAD<%s> dcrc<0x%x> DATRDDLY0/1<0x%x><0x%x> dsmpl<0x%x>\n", ++ // (result == 0 && dcrc == 0) ? "PASS" : "FAIL", dcrc, ++ // sdr_read32(MSDC_DAT_RDDLY0), sdr_read32(MSDC_DAT_RDDLY1), cur_dsmpl); ++ ++ /* Fix me: result is 0, but dcrc is still exist */ ++ if (result == 0 && dcrc == 0) { ++ goto done; ++ } else { ++ /* there is a case: command timeout, and data phase not processed */ ++ if (mrq->data->error != 0 && mrq->data->error != (unsigned int)(-EIO)) { ++ //printk("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>\n", ++ // result, mrq->cmd->error, mrq->data->error); ++ goto done; ++ } ++ } ++ } ++ ++ cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0); ++ cur_rxdly1 = sdr_read32(MSDC_DAT_RDDLY1); ++ ++ /* E1 ECO. YD: Reverse */ ++ if (sdr_read32(MSDC_ECO_VER) >= 4) { ++ orig_dat0 = (cur_rxdly0 >> 24) & 0x1F; ++ orig_dat1 = (cur_rxdly0 >> 16) & 0x1F; ++ orig_dat2 = (cur_rxdly0 >> 8) & 0x1F; ++ orig_dat3 = (cur_rxdly0 >> 0) & 0x1F; ++ orig_dat4 = (cur_rxdly1 >> 24) & 0x1F; ++ orig_dat5 = (cur_rxdly1 >> 16) & 0x1F; ++ orig_dat6 = (cur_rxdly1 >> 8) & 0x1F; ++ orig_dat7 = (cur_rxdly1 >> 0) & 0x1F; ++ } else { ++ orig_dat0 = (cur_rxdly0 >> 0) & 0x1F; ++ orig_dat1 = (cur_rxdly0 >> 8) & 0x1F; ++ orig_dat2 = (cur_rxdly0 >> 16) & 0x1F; ++ orig_dat3 = (cur_rxdly0 >> 24) & 0x1F; ++ orig_dat4 = (cur_rxdly1 >> 0) & 0x1F; ++ orig_dat5 = (cur_rxdly1 >> 8) & 0x1F; ++ orig_dat6 = (cur_rxdly1 >> 16) & 0x1F; ++ orig_dat7 = (cur_rxdly1 >> 24) & 0x1F; ++ } ++ ++ if (ddr) { ++ cur_dat0 = (dcrc & (1 << 0) || dcrc & (1 << 8)) ? ((orig_dat0 + 1) % 32) : orig_dat0; ++ cur_dat1 = (dcrc & (1 << 1) || dcrc & (1 << 9)) ? ((orig_dat1 + 1) % 32) : orig_dat1; ++ cur_dat2 = (dcrc & (1 << 2) || dcrc & (1 << 10)) ? ((orig_dat2 + 1) % 32) : orig_dat2; ++ cur_dat3 = (dcrc & (1 << 3) || dcrc & (1 << 11)) ? ((orig_dat3 + 1) % 32) : orig_dat3; ++ } else { ++ cur_dat0 = (dcrc & (1 << 0)) ? ((orig_dat0 + 1) % 32) : orig_dat0; ++ cur_dat1 = (dcrc & (1 << 1)) ? ((orig_dat1 + 1) % 32) : orig_dat1; ++ cur_dat2 = (dcrc & (1 << 2)) ? ((orig_dat2 + 1) % 32) : orig_dat2; ++ cur_dat3 = (dcrc & (1 << 3)) ? ((orig_dat3 + 1) % 32) : orig_dat3; ++ } ++ cur_dat4 = (dcrc & (1 << 4)) ? ((orig_dat4 + 1) % 32) : orig_dat4; ++ cur_dat5 = (dcrc & (1 << 5)) ? ((orig_dat5 + 1) % 32) : orig_dat5; ++ cur_dat6 = (dcrc & (1 << 6)) ? ((orig_dat6 + 1) % 32) : orig_dat6; ++ cur_dat7 = (dcrc & (1 << 7)) ? ((orig_dat7 + 1) % 32) : orig_dat7; ++ ++ cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0); ++ cur_rxdly1 = (cur_dat4 << 24) | (cur_dat5 << 16) | (cur_dat6 << 8) | (cur_dat7 << 0); ++ ++ sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0); ++ sdr_write32(MSDC_DAT_RDDLY1, cur_rxdly1); ++ ++ } while (++rxdly < 32); ++ ++done: ++ return result; ++} ++ ++static int msdc_tune_bwrite(struct mmc_host *mmc,struct mmc_request *mrq) ++{ ++ struct msdc_host *host = mmc_priv(mmc); ++ u32 base = host->base; ++ ++ u32 wrrdly, cur_wrrdly = 0, orig_wrrdly; ++ u32 dsmpl, cur_dsmpl, orig_dsmpl; ++ u32 rxdly, cur_rxdly0; ++ u32 orig_dat0, orig_dat1, orig_dat2, orig_dat3; ++ u32 cur_dat0, cur_dat1, cur_dat2, cur_dat3; ++ int result = -1; ++ u32 skip = 1; ++ ++ // MSDC_IOCON_DDR50CKD need to check. [Fix me] ++ ++ sdr_get_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, orig_wrrdly); ++ sdr_get_field(MSDC_IOCON, MSDC_IOCON_DSPL, orig_dsmpl ); ++ ++ /* Tune Method 2. just DAT0 */ ++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DDLSEL, 1); ++ cur_rxdly0 = sdr_read32(MSDC_DAT_RDDLY0); ++ ++ /* E1 ECO. YD: Reverse */ ++ if (sdr_read32(MSDC_ECO_VER) >= 4) { ++ orig_dat0 = (cur_rxdly0 >> 24) & 0x1F; ++ orig_dat1 = (cur_rxdly0 >> 16) & 0x1F; ++ orig_dat2 = (cur_rxdly0 >> 8) & 0x1F; ++ orig_dat3 = (cur_rxdly0 >> 0) & 0x1F; ++ } else { ++ orig_dat0 = (cur_rxdly0 >> 0) & 0x1F; ++ orig_dat1 = (cur_rxdly0 >> 8) & 0x1F; ++ orig_dat2 = (cur_rxdly0 >> 16) & 0x1F; ++ orig_dat3 = (cur_rxdly0 >> 24) & 0x1F; ++ } ++ ++ rxdly = 0; ++ do { ++ wrrdly = 0; ++ do { ++ for (dsmpl = 0; dsmpl < 2; dsmpl++) { ++ cur_dsmpl = (orig_dsmpl + dsmpl) % 2; ++ if (skip == 1) { ++ skip = 0; ++ continue; ++ } ++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, cur_dsmpl); ++ ++ if (host->app_cmd) { ++ result = msdc_app_cmd(host->mmc, host); ++ if (result) { ++ //printk("TUNE_BWRITE app_cmd<%d> failed\n", host->mrq->cmd->opcode); ++ continue; ++ } ++ } ++ result = msdc_do_request(mmc,mrq); ++ ++ //printk("TUNE_BWRITE<%s> DSPL<%d> DATWRDLY<%d> MSDC_DAT_RDDLY0<0x%x>\n", ++ // result == 0 ? "PASS" : "FAIL", ++ // cur_dsmpl, cur_wrrdly, cur_rxdly0); ++ ++ if (result == 0) { ++ goto done; ++ } ++ else { ++ /* there is a case: command timeout, and data phase not processed */ ++ if (mrq->data->error != (unsigned int)(-EIO)) { ++ //printk("TUNE_READ: result<0x%x> cmd_error<%d> data_error<%d>\n", ++ // && result, mrq->cmd->error, mrq->data->error); ++ goto done; ++ } ++ } ++ } ++ cur_wrrdly = (orig_wrrdly + wrrdly + 1) % 32; ++ sdr_set_field(MSDC_PAD_TUNE, MSDC_PAD_TUNE_DATWRDLY, cur_wrrdly); ++ } while (++wrrdly < 32); ++ ++ cur_dat0 = (orig_dat0 + rxdly) % 32; /* only adjust bit-1 for crc */ ++ cur_dat1 = orig_dat1; ++ cur_dat2 = orig_dat2; ++ cur_dat3 = orig_dat3; ++ ++ cur_rxdly0 = (cur_dat0 << 24) | (cur_dat1 << 16) | (cur_dat2 << 8) | (cur_dat3 << 0); ++ sdr_write32(MSDC_DAT_RDDLY0, cur_rxdly0); ++ } while (++rxdly < 32); ++ ++done: ++ return result; ++} ++ ++static int msdc_get_card_status(struct mmc_host *mmc, struct msdc_host *host, u32 *status) ++{ ++ struct mmc_command cmd; ++ struct mmc_request mrq; ++ u32 err; ++ ++ memset(&cmd, 0, sizeof(struct mmc_command)); ++ cmd.opcode = MMC_SEND_STATUS; ++ if (mmc->card) { ++ cmd.arg = mmc->card->rca << 16; ++ } else { ++ //printk("cmd13 mmc card is null\n"); ++ cmd.arg = host->app_cmd_arg; ++ } ++ cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC; ++ ++ memset(&mrq, 0, sizeof(struct mmc_request)); ++ mrq.cmd = &cmd; cmd.mrq = &mrq; ++ cmd.data = NULL; ++ ++ err = msdc_do_command(host, &cmd, 1, CMD_TIMEOUT); ++ ++ if (status) ++ *status = cmd.resp[0]; ++ ++ return err; ++} ++ ++static int msdc_check_busy(struct mmc_host *mmc, struct msdc_host *host) ++{ ++ u32 err = 0; ++ u32 status = 0; ++ ++ do { ++ err = msdc_get_card_status(mmc, host, &status); ++ if (err) ++ return err; ++ /* need cmd12? */ ++ //printk("cmd<13> resp<0x%x>\n", status); ++ } while (R1_CURRENT_STATE(status) == 7); ++ ++ return err; ++} ++ ++static int msdc_tune_request(struct mmc_host *mmc, struct mmc_request *mrq) ++{ ++ struct msdc_host *host = mmc_priv(mmc); ++ struct mmc_command *cmd; ++ struct mmc_data *data; ++ int ret=0, read; ++ ++ cmd = mrq->cmd; ++ data = mrq->cmd->data; ++ ++ read = data->flags & MMC_DATA_READ ? 1 : 0; ++ ++ if (read) { ++ if (data->error == (unsigned int)(-EIO)) ++ ret = msdc_tune_bread(mmc,mrq); ++ } else { ++ ret = msdc_check_busy(mmc, host); ++ if (ret){ ++ //printk("XXX cmd13 wait program done failed\n"); ++ return ret; ++ } ++ /* CRC and TO */ ++ /* Fix me: don't care card status? */ ++ ret = msdc_tune_bwrite(mmc,mrq); ++ } ++ ++ return ret; ++} ++ ++static void msdc_ops_request(struct mmc_host *mmc,struct mmc_request *mrq) ++{ ++ struct msdc_host *host = mmc_priv(mmc); ++ ++ if (host->mrq) { ++ //printk("XXX host->mrq<0x%.8x>\n", (int)host->mrq); ++ BUG(); ++ } ++ if (!is_card_present(host) || host->power_mode == MMC_POWER_OFF) { ++ //printk("cmd<%d> card<%d> power<%d>\n", mrq->cmd->opcode, is_card_present(host), host->power_mode); ++ mrq->cmd->error = (unsigned int)-ENOMEDIUM; ++ mrq->done(mrq); ++ return; ++ } ++ spin_lock(&host->lock); ++ ++ host->mrq = mrq; ++ ++ if (msdc_do_request(mmc,mrq)) ++ if(host->hw->flags & MSDC_REMOVABLE && mrq->data && mrq->data->error) ++ msdc_tune_request(mmc,mrq); ++ ++ if (mrq->cmd->opcode == MMC_APP_CMD) { ++ host->app_cmd = 1; ++ host->app_cmd_arg = mrq->cmd->arg; /* save the RCA */ ++ } else { ++ host->app_cmd = 0; ++ } ++ ++ host->mrq = NULL; ++ ++ spin_unlock(&host->lock); ++ ++ mmc_request_done(mmc, mrq); ++} ++ ++/* called by ops.set_ios */ ++static void msdc_set_buswidth(struct msdc_host *host, u32 width) ++{ ++ u32 base = host->base; ++ u32 val = sdr_read32(SDC_CFG); ++ ++ val &= ~SDC_CFG_BUSWIDTH; ++ ++ switch (width) { ++ default: ++ case MMC_BUS_WIDTH_1: ++ width = 1; ++ val |= (MSDC_BUS_1BITS << 16); ++ break; ++ case MMC_BUS_WIDTH_4: ++ val |= (MSDC_BUS_4BITS << 16); ++ break; ++ case MMC_BUS_WIDTH_8: ++ val |= (MSDC_BUS_8BITS << 16); ++ break; ++ } ++ ++ sdr_write32(SDC_CFG, val); ++ ++ //printk("Bus Width = %d\n", width); ++} ++ ++/* ops.set_ios */ ++static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) ++{ ++ struct msdc_host *host = mmc_priv(mmc); ++ struct msdc_hw *hw=host->hw; ++ u32 base = host->base; ++ u32 ddr = 0; ++ ++#ifdef MT6575_SD_DEBUG ++ static char *vdd[] = { ++ "1.50v", "1.55v", "1.60v", "1.65v", "1.70v", "1.80v", "1.90v", ++ "2.00v", "2.10v", "2.20v", "2.30v", "2.40v", "2.50v", "2.60v", ++ "2.70v", "2.80v", "2.90v", "3.00v", "3.10v", "3.20v", "3.30v", ++ "3.40v", "3.50v", "3.60v" ++ }; ++ static char *power_mode[] = { ++ "OFF", "UP", "ON" ++ }; ++ static char *bus_mode[] = { ++ "UNKNOWN", "OPENDRAIN", "PUSHPULL" ++ }; ++ static char *timing[] = { ++ "LEGACY", "MMC_HS", "SD_HS" ++ }; ++ ++ /*printk("SET_IOS: CLK(%dkHz), BUS(%s), BW(%u), PWR(%s), VDD(%s), TIMING(%s)\n", ++ ios->clock / 1000, bus_mode[ios->bus_mode], ++ (ios->bus_width == MMC_BUS_WIDTH_4) ? 4 : 1, ++ power_mode[ios->power_mode], vdd[ios->vdd], timing[ios->timing]);*/ ++#endif ++ ++ msdc_set_buswidth(host, ios->bus_width); ++ ++ /* Power control ??? */ ++ switch (ios->power_mode) { ++ case MMC_POWER_OFF: ++ case MMC_POWER_UP: ++ // msdc_set_power_mode(host, ios->power_mode); /* --- by chhung */ ++ break; ++ case MMC_POWER_ON: ++ host->power_mode = MMC_POWER_ON; ++ break; ++ default: ++ break; ++ } ++ ++ /* Clock control */ ++ if (host->mclk != ios->clock) { ++ if(ios->clock > 25000000) { ++ //printk("SD data latch edge<%d>\n", hw->data_edge); ++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_RSPL, hw->cmd_edge); ++ sdr_set_field(MSDC_IOCON, MSDC_IOCON_DSPL, hw->data_edge); ++ } else { ++ sdr_write32(MSDC_IOCON, 0x00000000); ++ sdr_write32(MSDC_DAT_RDDLY0, 0x10101010); // for MT7620 E2 and afterward ++ sdr_write32(MSDC_DAT_RDDLY1, 0x00000000); ++ sdr_write32(MSDC_PAD_TUNE, 0x84101010); // for MT7620 E2 and afterward ++ } ++ msdc_set_mclk(host, ddr, ios->clock); ++ } ++} ++ ++/* ops.get_ro */ ++static int msdc_ops_get_ro(struct mmc_host *mmc) ++{ ++ struct msdc_host *host = mmc_priv(mmc); ++ u32 base = host->base; ++ unsigned long flags; ++ int ro = 0; ++ ++ if (host->hw->flags & MSDC_WP_PIN_EN) { /* set for card */ ++ spin_lock_irqsave(&host->lock, flags); ++ ro = (sdr_read32(MSDC_PS) >> 31); ++ spin_unlock_irqrestore(&host->lock, flags); ++ } ++ return ro; ++} ++ ++/* ops.get_cd */ ++static int msdc_ops_get_cd(struct mmc_host *mmc) ++{ ++ struct msdc_host *host = mmc_priv(mmc); ++ u32 base = host->base; ++ unsigned long flags; ++ int present = 1; ++ ++ /* for sdio, MSDC_REMOVABLE not set, always return 1 */ ++ if (!(host->hw->flags & MSDC_REMOVABLE)) { ++ /* For sdio, read H/W always get<1>, but may timeout some times */ ++#if 1 ++ host->card_inserted = 1; ++ return 1; ++#else ++ host->card_inserted = (host->pm_state.event == PM_EVENT_USER_RESUME) ? 1 : 0; ++ printk("sdio ops_get_cd<%d>\n", host->card_inserted); ++ return host->card_inserted; ++#endif ++ } ++ ++ /* MSDC_CD_PIN_EN set for card */ ++ if (host->hw->flags & MSDC_CD_PIN_EN) { ++ spin_lock_irqsave(&host->lock, flags); ++#if 0 ++ present = host->card_inserted; /* why not read from H/W: Fix me*/ ++#else ++ present = (sdr_read32(MSDC_PS) & MSDC_PS_CDSTS) ? 0 : 1; ++ host->card_inserted = present; ++#endif ++ spin_unlock_irqrestore(&host->lock, flags); ++ } else { ++ present = 0; /* TODO? Check DAT3 pins for card detection */ ++ } ++ ++ //printk("ops_get_cd return<%d>\n", present); ++ return present; ++} ++ ++/* ops.enable_sdio_irq */ ++static void msdc_ops_enable_sdio_irq(struct mmc_host *mmc, int enable) ++{ ++ struct msdc_host *host = mmc_priv(mmc); ++ struct msdc_hw *hw = host->hw; ++ u32 base = host->base; ++ u32 tmp; ++ ++ if (hw->flags & MSDC_EXT_SDIO_IRQ) { /* yes for sdio */ ++ if (enable) { ++ hw->enable_sdio_eirq(); /* combo_sdio_enable_eirq */ ++ } else { ++ hw->disable_sdio_eirq(); /* combo_sdio_disable_eirq */ ++ } ++ } else { ++ //printk("XXX \n"); /* so never enter here */ ++ tmp = sdr_read32(SDC_CFG); ++ /* FIXME. Need to interrupt gap detection */ ++ if (enable) { ++ tmp |= (SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP); ++ } else { ++ tmp &= ~(SDC_CFG_SDIOIDE | SDC_CFG_SDIOINTWKUP); ++ } ++ sdr_write32(SDC_CFG, tmp); ++ } ++} ++ ++static struct mmc_host_ops mt_msdc_ops = { ++ .request = msdc_ops_request, ++ .set_ios = msdc_ops_set_ios, ++ .get_ro = msdc_ops_get_ro, ++ .get_cd = msdc_ops_get_cd, ++ .enable_sdio_irq = msdc_ops_enable_sdio_irq, ++}; ++ ++/*--------------------------------------------------------------------------*/ ++/* interrupt handler */ ++/*--------------------------------------------------------------------------*/ ++static irqreturn_t msdc_irq(int irq, void *dev_id) ++{ ++ struct msdc_host *host = (struct msdc_host *)dev_id; ++ struct mmc_data *data = host->data; ++ struct mmc_command *cmd = host->cmd; ++ u32 base = host->base; ++ ++ u32 cmdsts = MSDC_INT_RSPCRCERR | MSDC_INT_CMDTMO | MSDC_INT_CMDRDY | ++ MSDC_INT_ACMDCRCERR | MSDC_INT_ACMDTMO | MSDC_INT_ACMDRDY | ++ MSDC_INT_ACMD19_DONE; ++ u32 datsts = MSDC_INT_DATCRCERR |MSDC_INT_DATTMO; ++ ++ u32 intsts = sdr_read32(MSDC_INT); ++ u32 inten = sdr_read32(MSDC_INTEN); inten &= intsts; ++ ++ sdr_write32(MSDC_INT, intsts); /* clear interrupts */ ++ /* MSG will cause fatal error */ ++ ++ /* card change interrupt */ ++ if (intsts & MSDC_INT_CDSC){ ++ //printk("MSDC_INT_CDSC irq<0x%.8x>\n", intsts); ++ tasklet_hi_schedule(&host->card_tasklet); ++ /* tuning when plug card ? */ ++ } ++ ++ /* sdio interrupt */ ++ if (intsts & MSDC_INT_SDIOIRQ){ ++ //printk("XXX MSDC_INT_SDIOIRQ\n"); /* seems not sdio irq */ ++ //mmc_signal_sdio_irq(host->mmc); ++ } ++ ++ /* transfer complete interrupt */ ++ if (data != NULL) { ++ if (inten & MSDC_INT_XFER_COMPL) { ++ data->bytes_xfered = host->dma.xfersz; ++ complete(&host->xfer_done); ++ } ++ ++ if (intsts & datsts) { ++ /* do basic reset, or stop command will sdc_busy */ ++ msdc_reset(); ++ msdc_clr_fifo(); ++ msdc_clr_int(); ++ atomic_set(&host->abort, 1); /* For PIO mode exit */ ++ ++ if (intsts & MSDC_INT_DATTMO){ ++ //printk("XXX CMD<%d> MSDC_INT_DATTMO\n", host->mrq->cmd->opcode); ++ data->error = (unsigned int)-ETIMEDOUT; ++ } ++ else if (intsts & MSDC_INT_DATCRCERR){ ++ //printk("XXX CMD<%d> MSDC_INT_DATCRCERR, SDC_DCRC_STS<0x%x>\n", host->mrq->cmd->opcode, sdr_read32(SDC_DCRC_STS)); ++ data->error = (unsigned int)-EIO; ++ } ++ ++ //if(sdr_read32(MSDC_INTEN) & MSDC_INT_XFER_COMPL) { ++ if (host->dma_xfer) { ++ complete(&host->xfer_done); /* Read CRC come fast, XFER_COMPL not enabled */ ++ } /* PIO mode can't do complete, because not init */ ++ } ++ } ++ ++ /* command interrupts */ ++ if ((cmd != NULL) && (intsts & cmdsts)) { ++ if ((intsts & MSDC_INT_CMDRDY) || (intsts & MSDC_INT_ACMDRDY) || ++ (intsts & MSDC_INT_ACMD19_DONE)) { ++ u32 *rsp = &cmd->resp[0]; ++ ++ switch (host->cmd_rsp) { ++ case RESP_NONE: ++ break; ++ case RESP_R2: ++ *rsp++ = sdr_read32(SDC_RESP3); *rsp++ = sdr_read32(SDC_RESP2); ++ *rsp++ = sdr_read32(SDC_RESP1); *rsp++ = sdr_read32(SDC_RESP0); ++ break; ++ default: /* Response types 1, 3, 4, 5, 6, 7(1b) */ ++ if ((intsts & MSDC_INT_ACMDRDY) || (intsts & MSDC_INT_ACMD19_DONE)) { ++ *rsp = sdr_read32(SDC_ACMD_RESP); ++ } else { ++ *rsp = sdr_read32(SDC_RESP0); ++ } ++ break; ++ } ++ } else if ((intsts & MSDC_INT_RSPCRCERR) || (intsts & MSDC_INT_ACMDCRCERR)) { ++ if(intsts & MSDC_INT_ACMDCRCERR){ ++ //printk("XXX CMD<%d> MSDC_INT_ACMDCRCERR\n",cmd->opcode); ++ } ++ else { ++ //printk("XXX CMD<%d> MSDC_INT_RSPCRCERR\n",cmd->opcode); ++ } ++ cmd->error = (unsigned int)-EIO; ++ } else if ((intsts & MSDC_INT_CMDTMO) || (intsts & MSDC_INT_ACMDTMO)) { ++ if(intsts & MSDC_INT_ACMDTMO){ ++ //printk("XXX CMD<%d> MSDC_INT_ACMDTMO\n",cmd->opcode); ++ } ++ else { ++ //printk("XXX CMD<%d> MSDC_INT_CMDTMO\n",cmd->opcode); ++ } ++ cmd->error = (unsigned int)-ETIMEDOUT; ++ msdc_reset(); ++ msdc_clr_fifo(); ++ msdc_clr_int(); ++ } ++ complete(&host->cmd_done); ++ } ++ ++ /* mmc irq interrupts */ ++ if (intsts & MSDC_INT_MMCIRQ) { ++ //printk(KERN_INFO "msdc[%d] MMCIRQ: SDC_CSTS=0x%.8x\r\n", host->id, sdr_read32(SDC_CSTS)); ++ } ++ ++#ifdef MT6575_SD_DEBUG ++ { ++ msdc_int_reg *int_reg = (msdc_int_reg*)&intsts; ++ /*printk("IRQ_EVT(0x%x): MMCIRQ(%d) CDSC(%d), ACRDY(%d), ACTMO(%d), ACCRE(%d) AC19DN(%d)\n", ++ intsts, ++ int_reg->mmcirq, ++ int_reg->cdsc, ++ int_reg->atocmdrdy, ++ int_reg->atocmdtmo, ++ int_reg->atocmdcrc, ++ int_reg->atocmd19done); ++ printk("IRQ_EVT(0x%x): SDIO(%d) CMDRDY(%d), CMDTMO(%d), RSPCRC(%d), CSTA(%d)\n", ++ intsts, ++ int_reg->sdioirq, ++ int_reg->cmdrdy, ++ int_reg->cmdtmo, ++ int_reg->rspcrc, ++ int_reg->csta); ++ printk("IRQ_EVT(0x%x): XFCMP(%d) DXDONE(%d), DATTMO(%d), DATCRC(%d), DMAEMP(%d)\n", ++ intsts, ++ int_reg->xfercomp, ++ int_reg->dxferdone, ++ int_reg->dattmo, ++ int_reg->datcrc, ++ int_reg->dmaqempty);*/ ++ ++ } ++#endif ++ ++ return IRQ_HANDLED; ++} ++ ++/*--------------------------------------------------------------------------*/ ++/* platform_driver members */ ++/*--------------------------------------------------------------------------*/ ++/* called by msdc_drv_probe/remove */ ++static void msdc_enable_cd_irq(struct msdc_host *host, int enable) ++{ ++ struct msdc_hw *hw = host->hw; ++ u32 base = host->base; ++ ++ /* for sdio, not set */ ++ if ((hw->flags & MSDC_CD_PIN_EN) == 0) { ++ /* Pull down card detection pin since it is not avaiable */ ++ /* ++ if (hw->config_gpio_pin) ++ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN); ++ */ ++ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN); ++ sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC); ++ sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP); ++ return; ++ } ++ ++ //printk("CD IRQ Eanable(%d)\n", enable); ++ ++ if (enable) { ++ if (hw->enable_cd_eirq) { /* not set, never enter */ ++ hw->enable_cd_eirq(); ++ } else { ++ /* card detection circuit relies on the core power so that the core power ++ * shouldn't be turned off. Here adds a reference count to keep ++ * the core power alive. ++ */ ++ //msdc_vcore_on(host); //did in msdc_init_hw() ++ ++ if (hw->config_gpio_pin) /* NULL */ ++ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_UP); ++ ++ sdr_set_field(MSDC_PS, MSDC_PS_CDDEBOUNCE, DEFAULT_DEBOUNCE); ++ sdr_set_bits(MSDC_PS, MSDC_PS_CDEN); ++ sdr_set_bits(MSDC_INTEN, MSDC_INTEN_CDSC); ++ sdr_set_bits(SDC_CFG, SDC_CFG_INSWKUP); /* not in document! Fix me */ ++ } ++ } else { ++ if (hw->disable_cd_eirq) { ++ hw->disable_cd_eirq(); ++ } else { ++ if (hw->config_gpio_pin) /* NULL */ ++ hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_DOWN); ++ ++ sdr_clr_bits(SDC_CFG, SDC_CFG_INSWKUP); ++ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN); ++ sdr_clr_bits(MSDC_INTEN, MSDC_INTEN_CDSC); ++ ++ /* Here decreases a reference count to core power since card ++ * detection circuit is shutdown. ++ */ ++ //msdc_vcore_off(host); ++ } ++ } ++} ++ ++/* called by msdc_drv_probe */ ++static void msdc_init_hw(struct msdc_host *host) ++{ ++ u32 base = host->base; ++ struct msdc_hw *hw = host->hw; ++ ++#ifdef MT6575_SD_DEBUG ++ msdc_reg[host->id] = (struct msdc_regs *)host->base; ++#endif ++ ++ /* Power on */ ++#if 0 /* --- chhung */ ++ msdc_vcore_on(host); ++ msdc_pin_reset(host, MSDC_PIN_PULL_UP); ++ msdc_select_clksrc(host, hw->clk_src); ++ enable_clock(PERI_MSDC0_PDN + host->id, "SD"); ++ msdc_vdd_on(host); ++#endif /* end of --- */ ++ /* Configure to MMC/SD mode */ ++ sdr_set_field(MSDC_CFG, MSDC_CFG_MODE, MSDC_SDMMC); ++ ++ /* Reset */ ++ msdc_reset(); ++ msdc_clr_fifo(); ++ ++ /* Disable card detection */ ++ sdr_clr_bits(MSDC_PS, MSDC_PS_CDEN); ++ ++ /* Disable and clear all interrupts */ ++ sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN)); ++ sdr_write32(MSDC_INT, sdr_read32(MSDC_INT)); ++ ++#if 1 ++ /* reset tuning parameter */ ++ sdr_write32(MSDC_PAD_CTL0, 0x00090000); ++ sdr_write32(MSDC_PAD_CTL1, 0x000A0000); ++ sdr_write32(MSDC_PAD_CTL2, 0x000A0000); ++ // sdr_write32(MSDC_PAD_TUNE, 0x00000000); ++ sdr_write32(MSDC_PAD_TUNE, 0x84101010); // for MT7620 E2 and afterward ++ // sdr_write32(MSDC_DAT_RDDLY0, 0x00000000); ++ sdr_write32(MSDC_DAT_RDDLY0, 0x10101010); // for MT7620 E2 and afterward ++ sdr_write32(MSDC_DAT_RDDLY1, 0x00000000); ++ sdr_write32(MSDC_IOCON, 0x00000000); ++#if 0 // use MT7620 default value: 0x403c004f ++ sdr_write32(MSDC_PATCH_BIT0, 0x003C000F); /* bit0 modified: Rx Data Clock Source: 1 -> 2.0*/ ++#endif ++ ++ if (sdr_read32(MSDC_ECO_VER) >= 4) { ++ if (host->id == 1) { ++ sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_WRDAT_CRCS, 1); ++ sdr_set_field(MSDC_PATCH_BIT1, MSDC_PATCH_BIT1_CMD_RSP, 1); ++ ++ /* internal clock: latch read data */ ++ sdr_set_bits(MSDC_PATCH_BIT0, MSDC_PATCH_BIT_CKGEN_CK); ++ } ++ } ++#endif ++ ++ /* for safety, should clear SDC_CFG.SDIO_INT_DET_EN & set SDC_CFG.SDIO in ++ pre-loader,uboot,kernel drivers. and SDC_CFG.SDIO_INT_DET_EN will be only ++ set when kernel driver wants to use SDIO bus interrupt */ ++ /* Configure to enable SDIO mode. it's must otherwise sdio cmd5 failed */ ++ sdr_set_bits(SDC_CFG, SDC_CFG_SDIO); ++ ++ /* disable detect SDIO device interupt function */ ++ sdr_clr_bits(SDC_CFG, SDC_CFG_SDIOIDE); ++ ++ /* eneable SMT for glitch filter */ ++ sdr_set_bits(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKSMT); ++ sdr_set_bits(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDSMT); ++ sdr_set_bits(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATSMT); ++ ++#if 1 ++ /* set clk, cmd, dat pad driving */ ++ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, hw->clk_drv); ++ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, hw->clk_drv); ++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, hw->cmd_drv); ++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, hw->cmd_drv); ++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, hw->dat_drv); ++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, hw->dat_drv); ++#else ++ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVN, 0); ++ sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKDRVP, 0); ++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVN, 0); ++ sdr_set_field(MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDDRVP, 0); ++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVN, 0); ++ sdr_set_field(MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATDRVP, 0); ++#endif ++ ++ /* set sampling edge */ ++ ++ /* write crc timeout detection */ ++ sdr_set_field(MSDC_PATCH_BIT0, 1 << 30, 1); ++ ++ /* Configure to default data timeout */ ++ sdr_set_field(SDC_CFG, SDC_CFG_DTOC, DEFAULT_DTOC); ++ ++ msdc_set_buswidth(host, MMC_BUS_WIDTH_1); ++ ++ //printk("init hardware done!\n"); ++} ++ ++/* called by msdc_drv_remove */ ++static void msdc_deinit_hw(struct msdc_host *host) ++{ ++ u32 base = host->base; ++ ++ /* Disable and clear all interrupts */ ++ sdr_clr_bits(MSDC_INTEN, sdr_read32(MSDC_INTEN)); ++ sdr_write32(MSDC_INT, sdr_read32(MSDC_INT)); ++ ++ /* Disable card detection */ ++ msdc_enable_cd_irq(host, 0); ++ // msdc_set_power_mode(host, MMC_POWER_OFF); /* make sure power down */ /* --- by chhung */ ++} ++ ++/* init gpd and bd list in msdc_drv_probe */ ++static void msdc_init_gpd_bd(struct msdc_host *host, struct msdc_dma *dma) ++{ ++ gpd_t *gpd = dma->gpd; ++ bd_t *bd = dma->bd; ++ bd_t *ptr, *prev; ++ ++ /* we just support one gpd */ ++ int bdlen = MAX_BD_PER_GPD; ++ ++ /* init the 2 gpd */ ++ memset(gpd, 0, sizeof(gpd_t) * 2); ++ //gpd->next = (void *)virt_to_phys(gpd + 1); /* pointer to a null gpd, bug! kmalloc <-> virt_to_phys */ ++ //gpd->next = (dma->gpd_addr + 1); /* bug */ ++ gpd->next = (void *)((u32)dma->gpd_addr + sizeof(gpd_t)); ++ ++ //gpd->intr = 0; ++ gpd->bdp = 1; /* hwo, cs, bd pointer */ ++ //gpd->ptr = (void*)virt_to_phys(bd); ++ gpd->ptr = (void *)dma->bd_addr; /* physical address */ ++ ++ memset(bd, 0, sizeof(bd_t) * bdlen); ++ ptr = bd + bdlen - 1; ++ //ptr->eol = 1; /* 0 or 1 [Fix me]*/ ++ //ptr->next = 0; ++ ++ while (ptr != bd) { ++ prev = ptr - 1; ++ prev->next = (void *)(dma->bd_addr + sizeof(bd_t) *(ptr - bd)); ++ ptr = prev; ++ } ++} ++ ++static int msdc_drv_probe(struct platform_device *pdev) ++{ ++ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ __iomem void *base; ++ struct mmc_host *mmc; ++ struct resource *mem; ++ struct msdc_host *host; ++ struct msdc_hw *hw; ++ int ret, irq; ++ pdev->dev.platform_data = &msdc0_hw; ++ ++ /* Allocate MMC host for this device */ ++ mmc = mmc_alloc_host(sizeof(struct msdc_host), &pdev->dev); ++ if (!mmc) return -ENOMEM; ++ ++ hw = (struct msdc_hw*)pdev->dev.platform_data; ++ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ irq = platform_get_irq(pdev, 0); ++ ++ //BUG_ON((!hw) || (!mem) || (irq < 0)); /* --- by chhung */ ++ ++ base = devm_request_and_ioremap(&pdev->dev, res); ++ if (IS_ERR(base)) ++ return PTR_ERR(base); ++ ++/* mem = request_mem_region(mem->start - 0xa0000000, (mem->end - mem->start + 1) - 0xa0000000, dev_name(&pdev->dev)); ++ if (mem == NULL) { ++ mmc_free_host(mmc); ++ return -EBUSY; ++ } ++*/ ++ /* Set host parameters to mmc */ ++ mmc->ops = &mt_msdc_ops; ++ mmc->f_min = HOST_MIN_MCLK; ++ mmc->f_max = HOST_MAX_MCLK; ++ mmc->ocr_avail = MSDC_OCR_AVAIL; ++ ++ /* For sd card: MSDC_SYS_SUSPEND | MSDC_WP_PIN_EN | MSDC_CD_PIN_EN | MSDC_REMOVABLE | MSDC_HIGHSPEED, ++ For sdio : MSDC_EXT_SDIO_IRQ | MSDC_HIGHSPEED */ ++ if (hw->flags & MSDC_HIGHSPEED) { ++ mmc->caps = MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; ++ } ++ if (hw->data_pins == 4) { /* current data_pins are all 4*/ ++ mmc->caps |= MMC_CAP_4_BIT_DATA; ++ } else if (hw->data_pins == 8) { ++ mmc->caps |= MMC_CAP_8_BIT_DATA; ++ } ++ if ((hw->flags & MSDC_SDIO_IRQ) || (hw->flags & MSDC_EXT_SDIO_IRQ)) ++ mmc->caps |= MMC_CAP_SDIO_IRQ; /* yes for sdio */ ++ ++ /* MMC core transfer sizes tunable parameters */ ++ // mmc->max_hw_segs = MAX_HW_SGMTS; ++// mmc->max_phys_segs = MAX_PHY_SGMTS; ++ mmc->max_seg_size = MAX_SGMT_SZ; ++ mmc->max_blk_size = HOST_MAX_BLKSZ; ++ mmc->max_req_size = MAX_REQ_SZ; ++ mmc->max_blk_count = mmc->max_req_size; ++ ++ host = mmc_priv(mmc); ++ host->hw = hw; ++ host->mmc = mmc; ++ host->id = pdev->id; ++ host->error = 0; ++ host->irq = irq; ++ host->base = (unsigned long) base; ++ host->mclk = 0; /* mclk: the request clock of mmc sub-system */ ++ host->hclk = hclks[hw->clk_src]; /* hclk: clock of clock source to msdc controller */ ++ host->sclk = 0; /* sclk: the really clock after divition */ ++ host->pm_state = PMSG_RESUME; ++ host->suspend = 0; ++ host->core_clkon = 0; ++ host->card_clkon = 0; ++ host->core_power = 0; ++ host->power_mode = MMC_POWER_OFF; ++// host->card_inserted = hw->flags & MSDC_REMOVABLE ? 0 : 1; ++ host->timeout_ns = 0; ++ host->timeout_clks = DEFAULT_DTOC * 65536; ++ ++ host->mrq = NULL; ++ //init_MUTEX(&host->sem); /* we don't need to support multiple threads access */ ++ ++ host->dma.used_gpd = 0; ++ host->dma.used_bd = 0; ++ ++ /* using dma_alloc_coherent*/ /* todo: using 1, for all 4 slots */ ++ host->dma.gpd = dma_alloc_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), &host->dma.gpd_addr, GFP_KERNEL); ++ host->dma.bd = dma_alloc_coherent(NULL, MAX_BD_NUM * sizeof(bd_t), &host->dma.bd_addr, GFP_KERNEL); ++ BUG_ON((!host->dma.gpd) || (!host->dma.bd)); ++ msdc_init_gpd_bd(host, &host->dma); ++ /*for emmc*/ ++ msdc_6575_host[pdev->id] = host; ++ ++ tasklet_init(&host->card_tasklet, msdc_tasklet_card, (ulong)host); ++ spin_lock_init(&host->lock); ++ msdc_init_hw(host); ++ ++ ret = request_irq((unsigned int)irq, msdc_irq, IRQF_TRIGGER_LOW, dev_name(&pdev->dev), host); ++ if (ret) goto release; ++ // mt65xx_irq_unmask(irq); /* --- by chhung */ ++ ++ if (hw->flags & MSDC_CD_PIN_EN) { /* not set for sdio */ ++ if (hw->request_cd_eirq) { /* not set for MT6575 */ ++ hw->request_cd_eirq(msdc_eirq_cd, (void*)host); /* msdc_eirq_cd will not be used! */ ++ } ++ } ++ ++ if (hw->request_sdio_eirq) /* set to combo_sdio_request_eirq() for WIFI */ ++ hw->request_sdio_eirq(msdc_eirq_sdio, (void*)host); /* msdc_eirq_sdio() will be called when EIRQ */ ++ ++ if (hw->register_pm) {/* yes for sdio */ ++ if(hw->flags & MSDC_SYS_SUSPEND) { /* will not set for WIFI */ ++ //printk("MSDC_SYS_SUSPEND and register_pm both set\n"); ++ } ++ //mmc->pm_flags |= MMC_PM_IGNORE_PM_NOTIFY; /* pm not controlled by system but by client. */ /* --- by chhung */ ++ } ++ ++ platform_set_drvdata(pdev, mmc); ++ ++ ret = mmc_add_host(mmc); ++ if (ret) goto free_irq; ++ ++ /* Config card detection pin and enable interrupts */ ++ if (hw->flags & MSDC_CD_PIN_EN) { /* set for card */ ++ msdc_enable_cd_irq(host, 1); ++ } else { ++ msdc_enable_cd_irq(host, 0); ++ } ++ ++ return 0; ++ ++free_irq: ++ free_irq(irq, host); ++release: ++ platform_set_drvdata(pdev, NULL); ++ msdc_deinit_hw(host); ++ ++ tasklet_kill(&host->card_tasklet); ++ ++/* if (mem) ++ release_mem_region(mem->start, mem->end - mem->start + 1); ++*/ ++ mmc_free_host(mmc); ++ ++ return ret; ++} ++ ++/* 4 device share one driver, using "drvdata" to show difference */ ++static int msdc_drv_remove(struct platform_device *pdev) ++{ ++ struct mmc_host *mmc; ++ struct msdc_host *host; ++ struct resource *mem; ++ ++ ++ mmc = platform_get_drvdata(pdev); ++ BUG_ON(!mmc); ++ ++ host = mmc_priv(mmc); ++ BUG_ON(!host); ++ ++ //printk("removed !!!\n"); ++ ++ platform_set_drvdata(pdev, NULL); ++ mmc_remove_host(host->mmc); ++ msdc_deinit_hw(host); ++ ++ tasklet_kill(&host->card_tasklet); ++ free_irq(host->irq, host); ++ ++ dma_free_coherent(NULL, MAX_GPD_NUM * sizeof(gpd_t), host->dma.gpd, host->dma.gpd_addr); ++ dma_free_coherent(NULL, MAX_BD_NUM * sizeof(bd_t), host->dma.bd, host->dma.bd_addr); ++ ++ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ++ if (mem) ++ release_mem_region(mem->start, mem->end - mem->start + 1); ++ ++ mmc_free_host(host->mmc); ++ ++ return 0; ++} ++ ++static const struct of_device_id mt7620a_sdhci_match[] = { ++ { .compatible = "ralink,mt7620a-sdhci" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, rt288x_wdt_match); ++ ++/* Fix me: Power Flow */ ++static struct platform_driver mt_msdc_driver = { ++ .probe = msdc_drv_probe, ++ .remove = msdc_drv_remove, ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = mt7620a_sdhci_match, ++ ++ }, ++}; ++ ++static int __init mt_msdc_init(void) ++{ ++ int ret; ++/* +++ chhung */ ++ unsigned int reg; ++ ++ mtk_sd_device.dev.platform_data = &msdc0_hw; ++ printk("MTK MSDC device init.\n"); ++ reg = sdr_read32((__iomem void *) 0xb0000060) & ~(0x3<<18); ++ reg |= 0x1 << 18; ++ sdr_write32((__iomem void *) 0xb0000060, reg); ++/* end of +++ */ ++ ret = platform_driver_register(&mt_msdc_driver); ++ if (ret) { ++ printk(KERN_ERR DRV_NAME ": Can't register driver"); ++ return ret; ++ } ++ printk(KERN_INFO DRV_NAME ": MediaTek MT6575 MSDC Driver\n"); ++ ++ //msdc_debug_proc_init(); ++ return 0; ++} ++ ++static void __exit mt_msdc_exit(void) ++{ ++ platform_driver_unregister(&mt_msdc_driver); ++} ++ ++module_init(mt_msdc_init); ++module_exit(mt_msdc_exit); ++MODULE_LICENSE("GPL"); ++MODULE_DESCRIPTION("MediaTek MT6575 SD/MMC Card Driver"); ++MODULE_AUTHOR("Infinity Chen <infinity.chen@mediatek.com>"); ++ ++EXPORT_SYMBOL(msdc_6575_host); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0054-DMA-ralink-add-rt2880-dma-engine.patch b/target/linux/ramips/patches-3.14/0054-DMA-ralink-add-rt2880-dma-engine.patch new file mode 100644 index 0000000000..28dd8964b2 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0054-DMA-ralink-add-rt2880-dma-engine.patch @@ -0,0 +1,676 @@ +From cf93418a4bd5e69f069a65da92537bd4d6191223 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:29:51 +0100 +Subject: [PATCH 54/57] DMA: ralink: add rt2880 dma engine + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/dma/Kconfig | 6 + + drivers/dma/Makefile | 1 + + drivers/dma/dmaengine.c | 26 ++ + drivers/dma/ralink-gdma.c | 577 +++++++++++++++++++++++++++++++++++++++++++++ + include/linux/dmaengine.h | 1 + + 5 files changed, 611 insertions(+) + create mode 100644 drivers/dma/ralink-gdma.c + +diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig +index 605b016..a9b31ff 100644 +--- a/drivers/dma/Kconfig ++++ b/drivers/dma/Kconfig +@@ -351,6 +351,12 @@ config MOXART_DMA + help + Enable support for the MOXA ART SoC DMA controller. + ++config DMA_RALINK ++ tristate "RALINK DMA support" ++ depends on RALINK && SOC_MT7620 ++ select DMA_ENGINE ++ select DMA_VIRTUAL_CHANNELS ++ + config DMA_ENGINE + bool + +diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile +index a029d0f4..419ccc2 100644 +--- a/drivers/dma/Makefile ++++ b/drivers/dma/Makefile +@@ -44,3 +44,4 @@ obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o + obj-$(CONFIG_TI_CPPI41) += cppi41.o + obj-$(CONFIG_K3_DMA) += k3dma.o + obj-$(CONFIG_MOXART_DMA) += moxart-dma.o ++obj-$(CONFIG_DMA_RALINK) += ralink-gdma.o +diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c +index ed610b4..cc11e0b 100644 +--- a/drivers/dma/dmaengine.c ++++ b/drivers/dma/dmaengine.c +@@ -564,6 +564,32 @@ struct dma_chan *dma_get_any_slave_channel(struct dma_device *device) + EXPORT_SYMBOL_GPL(dma_get_any_slave_channel); + + /** ++ * dma_request_slave_channel - try to get specific channel exclusively ++ * @chan: target channel ++ */ ++struct dma_chan *dma_get_slave_channel(struct dma_chan *chan) ++{ ++ int err = -EBUSY; ++ ++ /* lock against __dma_request_channel */ ++ mutex_lock(&dma_list_mutex); ++ ++ if (chan->client_count == 0) { ++ err = dma_chan_get(chan); ++ if (err) ++ pr_debug("%s: failed to get %s: (%d)\n", ++ __func__, dma_chan_name(chan), err); ++ } else ++ chan = NULL; ++ ++ mutex_unlock(&dma_list_mutex); ++ ++ return chan; ++} ++EXPORT_SYMBOL_GPL(dma_get_slave_channel); ++ ++ ++/** + * __dma_request_channel - try to allocate an exclusive channel + * @mask: capabilities that the channel must satisfy + * @fn: optional callback to disposition available channels +diff --git a/drivers/dma/ralink-gdma.c b/drivers/dma/ralink-gdma.c +new file mode 100644 +index 0000000..2c3cace +--- /dev/null ++++ b/drivers/dma/ralink-gdma.c +@@ -0,0 +1,577 @@ ++/* ++ * Copyright (C) 2013, Lars-Peter Clausen <lars@metafoo.de> ++ * GDMA4740 DMAC support ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ */ ++ ++#include <linux/dmaengine.h> ++#include <linux/dma-mapping.h> ++#include <linux/err.h> ++#include <linux/init.h> ++#include <linux/list.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/slab.h> ++#include <linux/spinlock.h> ++#include <linux/irq.h> ++#include <linux/of_dma.h> ++ ++#include "virt-dma.h" ++ ++#define GDMA_NR_CHANS 16 ++ ++#define GDMA_REG_SRC_ADDR(x) (0x00 + (x) * 0x10) ++#define GDMA_REG_DST_ADDR(x) (0x04 + (x) * 0x10) ++ ++#define GDMA_REG_CTRL0(x) (0x08 + (x) * 0x10) ++#define GDMA_REG_CTRL0_TX_MASK 0xffff ++#define GDMA_REG_CTRL0_TX_SHIFT 16 ++#define GDMA_REG_CTRL0_CURR_MASK 0xff ++#define GDMA_REG_CTRL0_CURR_SHIFT 8 ++#define GDMA_REG_CTRL0_SRC_ADDR_FIXED BIT(7) ++#define GDMA_REG_CTRL0_DST_ADDR_FIXED BIT(6) ++#define GDMA_REG_CTRL0_BURST_MASK 0x7 ++#define GDMA_REG_CTRL0_BURST_SHIFT 3 ++#define GDMA_REG_CTRL0_DONE_INT BIT(2) ++#define GDMA_REG_CTRL0_ENABLE BIT(1) ++#define GDMA_REG_CTRL0_HW_MODE 0 ++ ++#define GDMA_REG_CTRL1(x) (0x0c + (x) * 0x10) ++#define GDMA_REG_CTRL1_SEG_MASK 0xf ++#define GDMA_REG_CTRL1_SEG_SHIFT 22 ++#define GDMA_REG_CTRL1_REQ_MASK 0x3f ++#define GDMA_REG_CTRL1_SRC_REQ_SHIFT 16 ++#define GDMA_REG_CTRL1_DST_REQ_SHIFT 8 ++#define GDMA_REG_CTRL1_CONTINOUS BIT(14) ++#define GDMA_REG_CTRL1_NEXT_MASK 0x1f ++#define GDMA_REG_CTRL1_NEXT_SHIFT 3 ++#define GDMA_REG_CTRL1_COHERENT BIT(2) ++#define GDMA_REG_CTRL1_FAIL BIT(1) ++#define GDMA_REG_CTRL1_MASK BIT(0) ++ ++#define GDMA_REG_UNMASK_INT 0x200 ++#define GDMA_REG_DONE_INT 0x204 ++ ++#define GDMA_REG_GCT 0x220 ++#define GDMA_REG_GCT_CHAN_MASK 0x3 ++#define GDMA_REG_GCT_CHAN_SHIFT 3 ++#define GDMA_REG_GCT_VER_MASK 0x3 ++#define GDMA_REG_GCT_VER_SHIFT 1 ++#define GDMA_REG_GCT_ARBIT_RR BIT(0) ++ ++enum gdma_dma_transfer_size { ++ GDMA_TRANSFER_SIZE_4BYTE = 0, ++ GDMA_TRANSFER_SIZE_8BYTE = 1, ++ GDMA_TRANSFER_SIZE_16BYTE = 2, ++ GDMA_TRANSFER_SIZE_32BYTE = 3, ++}; ++ ++struct gdma_dma_sg { ++ dma_addr_t addr; ++ unsigned int len; ++}; ++ ++struct gdma_dma_desc { ++ struct virt_dma_desc vdesc; ++ ++ enum dma_transfer_direction direction; ++ bool cyclic; ++ ++ unsigned int num_sgs; ++ struct gdma_dma_sg sg[]; ++}; ++ ++struct gdma_dmaengine_chan { ++ struct virt_dma_chan vchan; ++ unsigned int id; ++ ++ dma_addr_t fifo_addr; ++ unsigned int transfer_shift; ++ ++ struct gdma_dma_desc *desc; ++ unsigned int next_sg; ++}; ++ ++struct gdma_dma_dev { ++ struct dma_device ddev; ++ void __iomem *base; ++ struct clk *clk; ++ ++ struct gdma_dmaengine_chan chan[GDMA_NR_CHANS]; ++}; ++ ++static struct gdma_dma_dev *gdma_dma_chan_get_dev( ++ struct gdma_dmaengine_chan *chan) ++{ ++ return container_of(chan->vchan.chan.device, struct gdma_dma_dev, ++ ddev); ++} ++ ++static struct gdma_dmaengine_chan *to_gdma_dma_chan(struct dma_chan *c) ++{ ++ return container_of(c, struct gdma_dmaengine_chan, vchan.chan); ++} ++ ++static struct gdma_dma_desc *to_gdma_dma_desc(struct virt_dma_desc *vdesc) ++{ ++ return container_of(vdesc, struct gdma_dma_desc, vdesc); ++} ++ ++static inline uint32_t gdma_dma_read(struct gdma_dma_dev *dma_dev, ++ unsigned int reg) ++{ ++ return readl(dma_dev->base + reg); ++} ++ ++static inline void gdma_dma_write(struct gdma_dma_dev *dma_dev, ++ unsigned reg, uint32_t val) ++{ ++ //printk("gdma --> %p = 0x%08X\n", dma_dev->base + reg, val); ++ writel(val, dma_dev->base + reg); ++} ++ ++static inline void gdma_dma_write_mask(struct gdma_dma_dev *dma_dev, ++ unsigned int reg, uint32_t val, uint32_t mask) ++{ ++ uint32_t tmp; ++ ++ tmp = gdma_dma_read(dma_dev, reg); ++ tmp &= ~mask; ++ tmp |= val; ++ gdma_dma_write(dma_dev, reg, tmp); ++} ++ ++static struct gdma_dma_desc *gdma_dma_alloc_desc(unsigned int num_sgs) ++{ ++ return kzalloc(sizeof(struct gdma_dma_desc) + ++ sizeof(struct gdma_dma_sg) * num_sgs, GFP_ATOMIC); ++} ++ ++static enum gdma_dma_transfer_size gdma_dma_maxburst(u32 maxburst) ++{ ++ if (maxburst <= 7) ++ return GDMA_TRANSFER_SIZE_4BYTE; ++ else if (maxburst <= 15) ++ return GDMA_TRANSFER_SIZE_8BYTE; ++ else if (maxburst <= 31) ++ return GDMA_TRANSFER_SIZE_16BYTE; ++ ++ return GDMA_TRANSFER_SIZE_32BYTE; ++} ++ ++static int gdma_dma_slave_config(struct dma_chan *c, ++ const struct dma_slave_config *config) ++{ ++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c); ++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan); ++ enum gdma_dma_transfer_size transfer_size; ++ uint32_t flags; ++ uint32_t ctrl0, ctrl1; ++ ++ switch (config->direction) { ++ case DMA_MEM_TO_DEV: ++ ctrl1 = 32 << GDMA_REG_CTRL1_SRC_REQ_SHIFT; ++ ctrl1 |= config->slave_id << GDMA_REG_CTRL1_DST_REQ_SHIFT; ++ flags = GDMA_REG_CTRL0_DST_ADDR_FIXED; ++ transfer_size = gdma_dma_maxburst(config->dst_maxburst); ++ chan->fifo_addr = config->dst_addr; ++ break; ++ ++ case DMA_DEV_TO_MEM: ++ ctrl1 = config->slave_id << GDMA_REG_CTRL1_SRC_REQ_SHIFT; ++ ctrl1 |= 32 << GDMA_REG_CTRL1_DST_REQ_SHIFT; ++ flags = GDMA_REG_CTRL0_SRC_ADDR_FIXED; ++ transfer_size = gdma_dma_maxburst(config->src_maxburst); ++ chan->fifo_addr = config->src_addr; ++ break; ++ ++ default: ++ return -EINVAL; ++ } ++ ++ chan->transfer_shift = 1 + transfer_size; ++ ++ ctrl0 = flags | GDMA_REG_CTRL0_HW_MODE; ++ ctrl0 |= GDMA_REG_CTRL0_DONE_INT; ++ ++ ctrl1 &= ~(GDMA_REG_CTRL1_NEXT_MASK << GDMA_REG_CTRL1_NEXT_SHIFT); ++ ctrl1 |= chan->id << GDMA_REG_CTRL1_NEXT_SHIFT; ++ ctrl1 |= GDMA_REG_CTRL1_FAIL; ++ ctrl1 &= ~GDMA_REG_CTRL1_CONTINOUS; ++ gdma_dma_write(dma_dev, GDMA_REG_CTRL0(chan->id), ctrl0); ++ gdma_dma_write(dma_dev, GDMA_REG_CTRL1(chan->id), ctrl1); ++ ++ return 0; ++} ++ ++static int gdma_dma_terminate_all(struct dma_chan *c) ++{ ++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c); ++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan); ++ unsigned long flags; ++ LIST_HEAD(head); ++ ++ spin_lock_irqsave(&chan->vchan.lock, flags); ++ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id), 0, ++ GDMA_REG_CTRL0_ENABLE); ++ chan->desc = NULL; ++ vchan_get_all_descriptors(&chan->vchan, &head); ++ spin_unlock_irqrestore(&chan->vchan.lock, flags); ++ ++ vchan_dma_desc_free_list(&chan->vchan, &head); ++ ++ return 0; ++} ++ ++static int gdma_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, ++ unsigned long arg) ++{ ++ struct dma_slave_config *config = (struct dma_slave_config *)arg; ++ ++ switch (cmd) { ++ case DMA_SLAVE_CONFIG: ++ return gdma_dma_slave_config(chan, config); ++ case DMA_TERMINATE_ALL: ++ return gdma_dma_terminate_all(chan); ++ default: ++ return -ENOSYS; ++ } ++} ++ ++static int gdma_dma_start_transfer(struct gdma_dmaengine_chan *chan) ++{ ++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan); ++ dma_addr_t src_addr, dst_addr; ++ struct virt_dma_desc *vdesc; ++ struct gdma_dma_sg *sg; ++ ++ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id), 0, ++ GDMA_REG_CTRL0_ENABLE); ++ ++ if (!chan->desc) { ++ vdesc = vchan_next_desc(&chan->vchan); ++ if (!vdesc) ++ return 0; ++ chan->desc = to_gdma_dma_desc(vdesc); ++ chan->next_sg = 0; ++ } ++ ++ if (chan->next_sg == chan->desc->num_sgs) ++ chan->next_sg = 0; ++ ++ sg = &chan->desc->sg[chan->next_sg]; ++ ++ if (chan->desc->direction == DMA_MEM_TO_DEV) { ++ src_addr = sg->addr; ++ dst_addr = chan->fifo_addr; ++ } else { ++ src_addr = chan->fifo_addr; ++ dst_addr = sg->addr; ++ } ++ gdma_dma_write(dma_dev, GDMA_REG_SRC_ADDR(chan->id), src_addr); ++ gdma_dma_write(dma_dev, GDMA_REG_DST_ADDR(chan->id), dst_addr); ++ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL0(chan->id), ++ (sg->len << GDMA_REG_CTRL0_TX_SHIFT) | GDMA_REG_CTRL0_ENABLE, ++ GDMA_REG_CTRL0_TX_MASK << GDMA_REG_CTRL0_TX_SHIFT); ++ chan->next_sg++; ++ gdma_dma_write_mask(dma_dev, GDMA_REG_CTRL1(chan->id), 0, GDMA_REG_CTRL1_MASK); ++ ++ return 0; ++} ++ ++static void gdma_dma_chan_irq(struct gdma_dmaengine_chan *chan) ++{ ++ spin_lock(&chan->vchan.lock); ++ if (chan->desc) { ++ if (chan->desc && chan->desc->cyclic) { ++ vchan_cyclic_callback(&chan->desc->vdesc); ++ } else { ++ if (chan->next_sg == chan->desc->num_sgs) { ++ chan->desc = NULL; ++ vchan_cookie_complete(&chan->desc->vdesc); ++ } ++ } ++ } ++ gdma_dma_start_transfer(chan); ++ spin_unlock(&chan->vchan.lock); ++} ++ ++static irqreturn_t gdma_dma_irq(int irq, void *devid) ++{ ++ struct gdma_dma_dev *dma_dev = devid; ++ uint32_t unmask, done; ++ unsigned int i; ++ ++ unmask = gdma_dma_read(dma_dev, GDMA_REG_UNMASK_INT); ++ gdma_dma_write(dma_dev, GDMA_REG_UNMASK_INT, unmask); ++ done = gdma_dma_read(dma_dev, GDMA_REG_DONE_INT); ++ ++ for (i = 0; i < GDMA_NR_CHANS; ++i) ++ if (done & BIT(i)) ++ gdma_dma_chan_irq(&dma_dev->chan[i]); ++ gdma_dma_write(dma_dev, GDMA_REG_DONE_INT, done); ++ ++ return IRQ_HANDLED; ++} ++ ++static void gdma_dma_issue_pending(struct dma_chan *c) ++{ ++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c); ++ unsigned long flags; ++ ++ spin_lock_irqsave(&chan->vchan.lock, flags); ++ if (vchan_issue_pending(&chan->vchan) && !chan->desc) ++ gdma_dma_start_transfer(chan); ++ spin_unlock_irqrestore(&chan->vchan.lock, flags); ++} ++ ++static struct dma_async_tx_descriptor *gdma_dma_prep_slave_sg( ++ struct dma_chan *c, struct scatterlist *sgl, ++ unsigned int sg_len, enum dma_transfer_direction direction, ++ unsigned long flags, void *context) ++{ ++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c); ++ struct gdma_dma_desc *desc; ++ struct scatterlist *sg; ++ unsigned int i; ++ ++ desc = gdma_dma_alloc_desc(sg_len); ++ if (!desc) ++ return NULL; ++ ++ for_each_sg(sgl, sg, sg_len, i) { ++ desc->sg[i].addr = sg_dma_address(sg); ++ desc->sg[i].len = sg_dma_len(sg); ++ } ++ ++ desc->num_sgs = sg_len; ++ desc->direction = direction; ++ desc->cyclic = false; ++ ++ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags); ++} ++ ++static struct dma_async_tx_descriptor *gdma_dma_prep_dma_cyclic( ++ struct dma_chan *c, dma_addr_t buf_addr, size_t buf_len, ++ size_t period_len, enum dma_transfer_direction direction, ++ unsigned long flags, void *context) ++{ ++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c); ++ struct gdma_dma_desc *desc; ++ unsigned int num_periods, i; ++ ++ if (buf_len % period_len) ++ return NULL; ++ ++ num_periods = buf_len / period_len; ++ ++ desc = gdma_dma_alloc_desc(num_periods); ++ if (!desc) ++ return NULL; ++ ++ for (i = 0; i < num_periods; i++) { ++ desc->sg[i].addr = buf_addr; ++ desc->sg[i].len = period_len; ++ buf_addr += period_len; ++ } ++ ++ desc->num_sgs = num_periods; ++ desc->direction = direction; ++ desc->cyclic = true; ++ ++ return vchan_tx_prep(&chan->vchan, &desc->vdesc, flags); ++} ++ ++static size_t gdma_dma_desc_residue(struct gdma_dmaengine_chan *chan, ++ struct gdma_dma_desc *desc, unsigned int next_sg) ++{ ++ struct gdma_dma_dev *dma_dev = gdma_dma_chan_get_dev(chan); ++ unsigned int residue, count; ++ unsigned int i; ++ ++ residue = 0; ++ ++ for (i = next_sg; i < desc->num_sgs; i++) ++ residue += desc->sg[i].len; ++ ++ if (next_sg != 0) { ++ count = gdma_dma_read(dma_dev, GDMA_REG_CTRL0(chan->id)); ++ count >>= GDMA_REG_CTRL0_CURR_SHIFT; ++ count &= GDMA_REG_CTRL0_CURR_MASK; ++ residue += count << chan->transfer_shift; ++ } ++ ++ return residue; ++} ++ ++static enum dma_status gdma_dma_tx_status(struct dma_chan *c, ++ dma_cookie_t cookie, struct dma_tx_state *state) ++{ ++ struct gdma_dmaengine_chan *chan = to_gdma_dma_chan(c); ++ struct virt_dma_desc *vdesc; ++ enum dma_status status; ++ unsigned long flags; ++ ++ status = dma_cookie_status(c, cookie, state); ++ if (status == DMA_SUCCESS || !state) ++ return status; ++ ++ spin_lock_irqsave(&chan->vchan.lock, flags); ++ vdesc = vchan_find_desc(&chan->vchan, cookie); ++ if (cookie == chan->desc->vdesc.tx.cookie) { ++ state->residue = gdma_dma_desc_residue(chan, chan->desc, ++ chan->next_sg); ++ } else if (vdesc) { ++ state->residue = gdma_dma_desc_residue(chan, ++ to_gdma_dma_desc(vdesc), 0); ++ } else { ++ state->residue = 0; ++ } ++ spin_unlock_irqrestore(&chan->vchan.lock, flags); ++ ++ return status; ++} ++ ++static int gdma_dma_alloc_chan_resources(struct dma_chan *c) ++{ ++ return 0; ++} ++ ++static void gdma_dma_free_chan_resources(struct dma_chan *c) ++{ ++ vchan_free_chan_resources(to_virt_chan(c)); ++} ++ ++static void gdma_dma_desc_free(struct virt_dma_desc *vdesc) ++{ ++ kfree(container_of(vdesc, struct gdma_dma_desc, vdesc)); ++} ++ ++static struct dma_chan * ++of_dma_xlate_by_chan_id(struct of_phandle_args *dma_spec, ++ struct of_dma *ofdma) ++{ ++ struct gdma_dma_dev *dma_dev = ofdma->of_dma_data; ++ unsigned int request = dma_spec->args[0]; ++ ++ if (request >= GDMA_NR_CHANS) ++ return NULL; ++ ++ return dma_get_slave_channel(&(dma_dev->chan[request].vchan.chan)); ++} ++ ++static int gdma_dma_probe(struct platform_device *pdev) ++{ ++ struct gdma_dmaengine_chan *chan; ++ struct gdma_dma_dev *dma_dev; ++ struct dma_device *dd; ++ unsigned int i; ++ struct resource *res; ++ uint32_t gct; ++ int ret; ++ int irq; ++ ++ ++ dma_dev = devm_kzalloc(&pdev->dev, sizeof(*dma_dev), GFP_KERNEL); ++ if (!dma_dev) ++ return -EINVAL; ++ ++ dd = &dma_dev->ddev; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ dma_dev->base = devm_ioremap_resource(&pdev->dev, res); ++ if (IS_ERR(dma_dev->base)) ++ return PTR_ERR(dma_dev->base); ++ ++ dma_cap_set(DMA_SLAVE, dd->cap_mask); ++ dma_cap_set(DMA_CYCLIC, dd->cap_mask); ++ dd->device_alloc_chan_resources = gdma_dma_alloc_chan_resources; ++ dd->device_free_chan_resources = gdma_dma_free_chan_resources; ++ dd->device_tx_status = gdma_dma_tx_status; ++ dd->device_issue_pending = gdma_dma_issue_pending; ++ dd->device_prep_slave_sg = gdma_dma_prep_slave_sg; ++ dd->device_prep_dma_cyclic = gdma_dma_prep_dma_cyclic; ++ dd->device_control = gdma_dma_control; ++ dd->dev = &pdev->dev; ++ dd->chancnt = GDMA_NR_CHANS; ++ INIT_LIST_HEAD(&dd->channels); ++ ++ for (i = 0; i < dd->chancnt; i++) { ++ chan = &dma_dev->chan[i]; ++ chan->id = i; ++ chan->vchan.desc_free = gdma_dma_desc_free; ++ vchan_init(&chan->vchan, dd); ++ } ++ ++ ret = dma_async_device_register(dd); ++ if (ret) ++ return ret; ++ ++ ret = of_dma_controller_register(pdev->dev.of_node, ++ of_dma_xlate_by_chan_id, dma_dev); ++ if (ret) ++ goto err_unregister; ++ ++ irq = platform_get_irq(pdev, 0); ++ ret = request_irq(irq, gdma_dma_irq, 0, dev_name(&pdev->dev), dma_dev); ++ if (ret) ++ goto err_unregister; ++ ++ gdma_dma_write(dma_dev, GDMA_REG_UNMASK_INT, 0); ++ gdma_dma_write(dma_dev, GDMA_REG_DONE_INT, BIT(dd->chancnt) - 1); ++ ++ gct = gdma_dma_read(dma_dev, GDMA_REG_GCT); ++ dev_info(&pdev->dev, "revision: %d, channels: %d\n", ++ (gct >> GDMA_REG_GCT_VER_SHIFT) & GDMA_REG_GCT_VER_MASK, ++ 8 << ((gct >> GDMA_REG_GCT_CHAN_SHIFT) & GDMA_REG_GCT_CHAN_MASK)); ++ platform_set_drvdata(pdev, dma_dev); ++ ++ gdma_dma_write(dma_dev, GDMA_REG_GCT, GDMA_REG_GCT_ARBIT_RR); ++ ++ return 0; ++ ++err_unregister: ++ dma_async_device_unregister(dd); ++ return ret; ++} ++ ++static int gdma_dma_remove(struct platform_device *pdev) ++{ ++ struct gdma_dma_dev *dma_dev = platform_get_drvdata(pdev); ++ int irq = platform_get_irq(pdev, 0); ++ ++ free_irq(irq, dma_dev); ++ of_dma_controller_free(pdev->dev.of_node); ++ dma_async_device_unregister(&dma_dev->ddev); ++ ++ return 0; ++} ++ ++static const struct of_device_id gdma_of_match_table[] = { ++ { .compatible = "ralink,rt2880-gdma" }, ++ { }, ++}; ++ ++static struct platform_driver gdma_dma_driver = { ++ .probe = gdma_dma_probe, ++ .remove = gdma_dma_remove, ++ .driver = { ++ .name = "gdma-rt2880", ++ .owner = THIS_MODULE, ++ .of_match_table = gdma_of_match_table, ++ }, ++}; ++module_platform_driver(gdma_dma_driver); ++ ++MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); ++MODULE_DESCRIPTION("GDMA4740 DMA driver"); ++MODULE_LICENSE("GPLv2"); +diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h +index c5c92d5..482131e 100644 +--- a/include/linux/dmaengine.h ++++ b/include/linux/dmaengine.h +@@ -1072,6 +1072,7 @@ struct dma_chan *dma_request_slave_channel_reason(struct device *dev, + const char *name); + struct dma_chan *dma_request_slave_channel(struct device *dev, const char *name); + void dma_release_channel(struct dma_chan *chan); ++struct dma_chan *dma_get_slave_channel(struct dma_chan *chan); + #else + static inline struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type) + { +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0055-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-3.14/0055-asoc-add-mt7620-support.patch new file mode 100644 index 0000000000..c1cef33764 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0055-asoc-add-mt7620-support.patch @@ -0,0 +1,734 @@ +From 241188942603dc73f62cf2553c53cae2235c9957 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:31:47 +0100 +Subject: [PATCH 55/57] asoc: add mt7620 support + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/of.c | 2 + + sound/soc/Kconfig | 1 + + sound/soc/Makefile | 1 + + sound/soc/ralink/Kconfig | 15 ++ + sound/soc/ralink/Makefile | 11 + + sound/soc/ralink/mt7620-i2s.c | 466 ++++++++++++++++++++++++++++++++++++++ + sound/soc/ralink/mt7620-wm8960.c | 125 ++++++++++ + sound/soc/soc-io.c | 10 - + 8 files changed, 621 insertions(+), 10 deletions(-) + create mode 100644 sound/soc/ralink/Kconfig + create mode 100644 sound/soc/ralink/Makefile + create mode 100644 sound/soc/ralink/mt7620-i2s.c + create mode 100644 sound/soc/ralink/mt7620-wm8960.c + +diff --git a/arch/mips/ralink/of.c b/arch/mips/ralink/of.c +index 405b79c..dfda6e6 100644 +--- a/arch/mips/ralink/of.c ++++ b/arch/mips/ralink/of.c +@@ -15,6 +15,7 @@ + #include <linux/of_fdt.h> + #include <linux/kernel.h> + #include <linux/bootmem.h> ++#include <linux/module.h> + #include <linux/of_platform.h> + #include <linux/of_address.h> + +@@ -26,6 +27,7 @@ + #include "common.h" + + __iomem void *rt_sysc_membase; ++EXPORT_SYMBOL(rt_sysc_membase); + __iomem void *rt_memc_membase; + + extern struct boot_param_header __dtb_start; +diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig +index d62ce48..de91f58 100644 +--- a/sound/soc/Kconfig ++++ b/sound/soc/Kconfig +@@ -47,6 +47,7 @@ source "sound/soc/kirkwood/Kconfig" + source "sound/soc/intel/Kconfig" + source "sound/soc/mxs/Kconfig" + source "sound/soc/pxa/Kconfig" ++source "sound/soc/ralink/Kconfig" + source "sound/soc/samsung/Kconfig" + source "sound/soc/s6000/Kconfig" + source "sound/soc/sh/Kconfig" +diff --git a/sound/soc/Makefile b/sound/soc/Makefile +index 62a1822..1d9398c 100644 +--- a/sound/soc/Makefile ++++ b/sound/soc/Makefile +@@ -24,6 +24,7 @@ obj-$(CONFIG_SND_SOC) += nuc900/ + obj-$(CONFIG_SND_SOC) += omap/ + obj-$(CONFIG_SND_SOC) += kirkwood/ + obj-$(CONFIG_SND_SOC) += pxa/ ++obj-$(CONFIG_SND_SOC) += ralink/ + obj-$(CONFIG_SND_SOC) += samsung/ + obj-$(CONFIG_SND_SOC) += s6000/ + obj-$(CONFIG_SND_SOC) += sh/ +diff --git a/sound/soc/ralink/Kconfig b/sound/soc/ralink/Kconfig +new file mode 100644 +index 0000000..d462622 +--- /dev/null ++++ b/sound/soc/ralink/Kconfig +@@ -0,0 +1,15 @@ ++config SND_MT7620_SOC_I2S ++ depends on SOC_MT7620 && SND_SOC ++ select SND_SOC_GENERIC_DMAENGINE_PCM ++ tristate "SoC Audio (I2S protocol) for Ralink MT7620 SoC" ++ help ++ Say Y if you want to use I2S protocol and I2S codec on Ingenic MT7620 ++ based boards. ++ ++config SND_MT7620_SOC_WM8960 ++ tristate "SoC Audio support for Ralink WM8960" ++ select SND_MT7620_SOC_I2S ++ select SND_SOC_WM8960 ++ help ++ Say Y if you want to add support for ASoC audio on the Qi LB60 board ++ a.k.a Qi Ben NanoNote. +diff --git a/sound/soc/ralink/Makefile b/sound/soc/ralink/Makefile +new file mode 100644 +index 0000000..3d79980 +--- /dev/null ++++ b/sound/soc/ralink/Makefile +@@ -0,0 +1,11 @@ ++# ++# Jz4740 Platform Support ++# ++snd-soc-mt7620-i2s-objs := mt7620-i2s.o ++ ++obj-$(CONFIG_SND_MT7620_SOC_I2S) += snd-soc-mt7620-i2s.o ++ ++# Jz4740 Machine Support ++snd-soc-mt7620-wm8960-objs := mt7620-wm8960.o ++ ++obj-$(CONFIG_SND_MT7620_SOC_WM8960) += snd-soc-mt7620-wm8960.o +diff --git a/sound/soc/ralink/mt7620-i2s.c b/sound/soc/ralink/mt7620-i2s.c +new file mode 100644 +index 0000000..846db03 +--- /dev/null ++++ b/sound/soc/ralink/mt7620-i2s.c +@@ -0,0 +1,466 @@ ++/* ++ * Copyright (C) 2010, Lars-Peter Clausen <lars@metafoo.de> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ */ ++ ++#include <linux/init.h> ++#include <linux/io.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/slab.h> ++ ++#include <linux/delay.h> ++ ++#include <linux/dma-mapping.h> ++ ++#include <sound/core.h> ++#include <sound/pcm.h> ++#include <sound/pcm_params.h> ++#include <sound/soc.h> ++#include <sound/initval.h> ++#include <sound/dmaengine_pcm.h> ++ ++#include <ralink_regs.h> ++ ++#define I2S_REG_CFG0 0x00 ++#define I2S_REG_CFG0_EN BIT(31) ++#define I2S_REG_CFG0_DMA_EN BIT(30) ++#define I2S_REG_CFG0_BYTE_SWAP BIT(28) ++#define I2S_REG_CFG0_TX_EN BIT(24) ++#define I2S_REG_CFG0_RX_EN BIT(20) ++#define I2S_REG_CFG0_SLAVE BIT(16) ++#define I2S_REG_CFG0_RX_THRES 12 ++#define I2S_REG_CFG0_TX_THRES 4 ++#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \ ++ (4 << I2S_REG_CFG0_TX_THRES) ++ ++#define I2S_REG_INT_STATUS 0x04 ++#define I2S_REG_INT_EN 0x08 ++#define I2S_REG_FF_STATUS 0x0c ++#define I2S_REG_WREG 0x10 ++#define I2S_REG_RREG 0x14 ++#define I2S_REG_CFG1 0x18 ++ ++#define I2S_REG_DIVCMP 0x20 ++#define I2S_REG_DIVINT 0x24 ++#define I2S_REG_CLK_EN BIT(31) ++ ++struct mt7620_i2s { ++ struct resource *mem; ++ void __iomem *base; ++ dma_addr_t phys_base; ++ ++ struct snd_dmaengine_dai_dma_data playback_dma_data; ++ struct snd_dmaengine_dai_dma_data capture_dma_data; ++}; ++ ++static inline uint32_t mt7620_i2s_read(const struct mt7620_i2s *i2s, ++ unsigned int reg) ++{ ++ return readl(i2s->base + reg); ++} ++ ++static inline void mt7620_i2s_write(const struct mt7620_i2s *i2s, ++ unsigned int reg, uint32_t value) ++{ ++ //printk("i2s --> %p = 0x%08X\n", i2s->base + reg, value); ++ writel(value, i2s->base + reg); ++} ++ ++static int mt7620_i2s_startup(struct snd_pcm_substream *substream, ++ struct snd_soc_dai *dai) ++{ ++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ uint32_t cfg; ++ ++ if (dai->active) ++ return 0; ++ ++ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0); ++ cfg |= I2S_REG_CFG0_EN; ++ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg); ++ ++ return 0; ++} ++ ++static void mt7620_i2s_shutdown(struct snd_pcm_substream *substream, ++ struct snd_soc_dai *dai) ++{ ++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ uint32_t cfg; ++ ++ if (dai->active) ++ return; ++ ++ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0); ++ cfg &= ~I2S_REG_CFG0_EN; ++ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg); ++} ++ ++static int mt7620_i2s_trigger(struct snd_pcm_substream *substream, int cmd, ++ struct snd_soc_dai *dai) ++{ ++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ ++ uint32_t cfg; ++ uint32_t mask; ++ ++ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ++ mask = I2S_REG_CFG0_TX_EN; ++ else ++ mask = I2S_REG_CFG0_RX_EN; ++ ++ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0); ++ ++ switch (cmd) { ++ case SNDRV_PCM_TRIGGER_START: ++ case SNDRV_PCM_TRIGGER_RESUME: ++ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: ++ cfg |= mask; ++ break; ++ case SNDRV_PCM_TRIGGER_STOP: ++ case SNDRV_PCM_TRIGGER_SUSPEND: ++ case SNDRV_PCM_TRIGGER_PAUSE_PUSH: ++ cfg &= ~mask; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ if (cfg & (I2S_REG_CFG0_TX_EN | I2S_REG_CFG0_RX_EN)) ++ cfg |= I2S_REG_CFG0_DMA_EN; ++ else ++ cfg &= ~I2S_REG_CFG0_DMA_EN; ++ ++ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg); ++ ++ return 0; ++} ++ ++static int mt7620_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) ++{ ++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ uint32_t cfg; ++ ++ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0); ++ ++ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { ++ case SND_SOC_DAIFMT_CBS_CFS: ++ cfg |= I2S_REG_CFG0_SLAVE; ++ break; ++ case SND_SOC_DAIFMT_CBM_CFM: ++ cfg &= ~I2S_REG_CFG0_SLAVE; ++ break; ++ case SND_SOC_DAIFMT_CBM_CFS: ++ default: ++ return -EINVAL; ++ } ++ ++ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { ++ case SND_SOC_DAIFMT_I2S: ++ case SND_SOC_DAIFMT_MSB: ++ cfg &= ~I2S_REG_CFG0_BYTE_SWAP; ++ break; ++ case SND_SOC_DAIFMT_LSB: ++ cfg |= I2S_REG_CFG0_BYTE_SWAP; ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { ++ case SND_SOC_DAIFMT_NB_NF: ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg); ++ ++ return 0; ++} ++ ++static int mt7620_i2s_hw_params(struct snd_pcm_substream *substream, ++ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) ++{ ++ ++ return 0; ++} ++ ++unsigned long i2sMaster_inclk_int[11] = { ++ 78, 56, 52, 39, 28, 26, 19, 14, 13, 9, 6}; ++unsigned long i2sMaster_inclk_comp[11] = { ++ 64, 352, 42, 32, 176, 21, 272, 88, 10, 455, 261}; ++ ++ ++static int mt7620_i2s_set_sysclk(struct snd_soc_dai *dai, int clk_id, ++ unsigned int freq, int dir) ++{ ++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ ++ printk("Internal REFCLK with fractional division\n"); ++ ++ mt7620_i2s_write(i2s, I2S_REG_DIVINT, i2sMaster_inclk_int[7]); ++ mt7620_i2s_write(i2s, I2S_REG_DIVCMP, ++ i2sMaster_inclk_comp[7] | I2S_REG_CLK_EN); ++ ++/* struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ struct clk *parent; ++ int ret = 0; ++ ++ switch (clk_id) { ++ case JZ4740_I2S_CLKSRC_EXT: ++ parent = clk_get(NULL, "ext"); ++ clk_set_parent(i2s->clk_i2s, parent); ++ break; ++ case JZ4740_I2S_CLKSRC_PLL: ++ parent = clk_get(NULL, "pll half"); ++ clk_set_parent(i2s->clk_i2s, parent); ++ ret = clk_set_rate(i2s->clk_i2s, freq); ++ break; ++ default: ++ return -EINVAL; ++ } ++ clk_put(parent); ++ ++ return ret;*/ ++ return 0; ++} ++ ++static int mt7620_i2s_suspend(struct snd_soc_dai *dai) ++{ ++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ uint32_t cfg; ++ ++ if (dai->active) { ++ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0); ++ cfg &= ~I2S_REG_CFG0_TX_EN; ++ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg); ++ } ++ ++ return 0; ++} ++ ++static int mt7620_i2s_resume(struct snd_soc_dai *dai) ++{ ++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ uint32_t cfg; ++ ++ if (dai->active) { ++ cfg = mt7620_i2s_read(i2s, I2S_REG_CFG0); ++ cfg |= I2S_REG_CFG0_TX_EN; ++ mt7620_i2s_write(i2s, I2S_REG_CFG0, cfg); ++ } ++ ++ return 0; ++} ++ ++static void mt7620_i2c_init_pcm_config(struct mt7620_i2s *i2s) ++{ ++ struct snd_dmaengine_dai_dma_data *dma_data; ++ ++ /* Playback */ ++ dma_data = &i2s->playback_dma_data; ++ dma_data->maxburst = 16; ++ dma_data->slave_id = 2; //JZ4740_DMA_TYPE_AIC_TRANSMIT; ++ dma_data->addr = i2s->phys_base + I2S_REG_WREG; ++ ++ /* Capture */ ++ dma_data = &i2s->capture_dma_data; ++ dma_data->maxburst = 16; ++ dma_data->slave_id = 3; //JZ4740_DMA_TYPE_AIC_RECEIVE; ++ dma_data->addr = i2s->phys_base + I2S_REG_RREG; ++} ++ ++static int mt7620_i2s_dai_probe(struct snd_soc_dai *dai) ++{ ++ struct mt7620_i2s *i2s = snd_soc_dai_get_drvdata(dai); ++ uint32_t data; ++ ++ mt7620_i2c_init_pcm_config(i2s); ++ dai->playback_dma_data = &i2s->playback_dma_data; ++ dai->capture_dma_data = &i2s->capture_dma_data; ++ ++ /* set share pins to i2s/gpio mode and i2c mode */ ++ data = rt_sysc_r32(0x60); ++ data &= 0xFFFFFFE2; ++ data |= 0x00000018; ++ rt_sysc_w32(data, 0x60); ++ ++ printk("Internal REFCLK with fractional division\n"); ++ ++ mt7620_i2s_write(i2s, I2S_REG_CFG0, I2S_REG_CFG0_DFT_THRES); ++ mt7620_i2s_write(i2s, I2S_REG_CFG1, 0); ++ mt7620_i2s_write(i2s, I2S_REG_INT_EN, 0); ++ ++ mt7620_i2s_write(i2s, I2S_REG_DIVINT, i2sMaster_inclk_int[7]); ++ mt7620_i2s_write(i2s, I2S_REG_DIVCMP, ++ i2sMaster_inclk_comp[7] | I2S_REG_CLK_EN); ++ ++ return 0; ++} ++ ++static int mt7620_i2s_dai_remove(struct snd_soc_dai *dai) ++{ ++ return 0; ++} ++ ++static const struct snd_soc_dai_ops mt7620_i2s_dai_ops = { ++ .startup = mt7620_i2s_startup, ++ .shutdown = mt7620_i2s_shutdown, ++ .trigger = mt7620_i2s_trigger, ++ .hw_params = mt7620_i2s_hw_params, ++ .set_fmt = mt7620_i2s_set_fmt, ++ .set_sysclk = mt7620_i2s_set_sysclk, ++}; ++ ++#define JZ4740_I2S_FMTS (SNDRV_PCM_FMTBIT_S8 | \ ++ SNDRV_PCM_FMTBIT_S16_LE) ++ ++static struct snd_soc_dai_driver mt7620_i2s_dai = { ++ .probe = mt7620_i2s_dai_probe, ++ .remove = mt7620_i2s_dai_remove, ++ .playback = { ++ .channels_min = 1, ++ .channels_max = 2, ++ .rates = SNDRV_PCM_RATE_8000_48000, ++ .formats = JZ4740_I2S_FMTS, ++ }, ++ .capture = { ++ .channels_min = 2, ++ .channels_max = 2, ++ .rates = SNDRV_PCM_RATE_8000_48000, ++ .formats = JZ4740_I2S_FMTS, ++ }, ++ .symmetric_rates = 1, ++ .ops = &mt7620_i2s_dai_ops, ++ .suspend = mt7620_i2s_suspend, ++ .resume = mt7620_i2s_resume, ++}; ++ ++static const struct snd_pcm_hardware mt7620_pcm_hardware = { ++ .info = SNDRV_PCM_INFO_MMAP | ++ SNDRV_PCM_INFO_MMAP_VALID | ++ SNDRV_PCM_INFO_INTERLEAVED | ++ SNDRV_PCM_INFO_BLOCK_TRANSFER, ++ .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8, ++ .period_bytes_min = PAGE_SIZE, ++ .period_bytes_max = 64 * 1024, ++ .periods_min = 2, ++ .periods_max = 128, ++ .buffer_bytes_max = 128 * 1024, ++ .fifo_size = 32, ++}; ++ ++static const struct snd_dmaengine_pcm_config mt7620_dmaengine_pcm_config = { ++ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, ++ .pcm_hardware = &mt7620_pcm_hardware, ++ .prealloc_buffer_size = 256 * PAGE_SIZE, ++}; ++ ++static const struct snd_soc_component_driver mt7620_i2s_component = { ++ .name = "mt7620-i2s", ++}; ++ ++static int mt7620_i2s_dev_probe(struct platform_device *pdev) ++{ ++ struct mt7620_i2s *i2s; ++ int ret; ++ ++ snd_dmaengine_pcm_register(&pdev->dev, ++ &mt7620_dmaengine_pcm_config, ++ SND_DMAENGINE_PCM_FLAG_COMPAT); ++ ++ i2s = kzalloc(sizeof(*i2s), GFP_KERNEL); ++ if (!i2s) ++ return -ENOMEM; ++ ++ i2s->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!i2s->mem) { ++ ret = -ENOENT; ++ goto err_free; ++ } ++ ++ i2s->mem = request_mem_region(i2s->mem->start, resource_size(i2s->mem), ++ pdev->name); ++ if (!i2s->mem) { ++ ret = -EBUSY; ++ goto err_free; ++ } ++ ++ i2s->base = ioremap_nocache(i2s->mem->start, resource_size(i2s->mem)); ++ if (!i2s->base) { ++ ret = -EBUSY; ++ goto err_release_mem_region; ++ } ++ ++ i2s->phys_base = i2s->mem->start; ++ ++ platform_set_drvdata(pdev, i2s); ++ ret = snd_soc_register_component(&pdev->dev, &mt7620_i2s_component, ++ &mt7620_i2s_dai, 1); ++ ++ if (!ret) { ++ dev_err(&pdev->dev, "loaded\n"); ++ return ret; ++ } ++ ++ dev_err(&pdev->dev, "Failed to register DAI\n"); ++ iounmap(i2s->base); ++ ++err_release_mem_region: ++ release_mem_region(i2s->mem->start, resource_size(i2s->mem)); ++err_free: ++ kfree(i2s); ++ ++ return ret; ++} ++ ++static int mt7620_i2s_dev_remove(struct platform_device *pdev) ++{ ++ struct mt7620_i2s *i2s = platform_get_drvdata(pdev); ++ ++ snd_soc_unregister_component(&pdev->dev); ++ ++ iounmap(i2s->base); ++ release_mem_region(i2s->mem->start, resource_size(i2s->mem)); ++ ++ kfree(i2s); ++ ++ snd_dmaengine_pcm_unregister(&pdev->dev); ++ ++ return 0; ++} ++ ++static const struct of_device_id mt7620_i2s_match[] = { ++ { .compatible = "ralink,mt7620a-i2s" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, mt7620_i2s_match); ++ ++static struct platform_driver mt7620_i2s_driver = { ++ .probe = mt7620_i2s_dev_probe, ++ .remove = mt7620_i2s_dev_remove, ++ .driver = { ++ .name = "mt7620-i2s", ++ .owner = THIS_MODULE, ++ .of_match_table = mt7620_i2s_match, ++ }, ++}; ++ ++module_platform_driver(mt7620_i2s_driver); ++ ++MODULE_AUTHOR("Lars-Peter Clausen, <lars@metafoo.de>"); ++MODULE_DESCRIPTION("Ingenic JZ4740 SoC I2S driver"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:mt7620-i2s"); +diff --git a/sound/soc/ralink/mt7620-wm8960.c b/sound/soc/ralink/mt7620-wm8960.c +new file mode 100644 +index 0000000..c0f6389 +--- /dev/null ++++ b/sound/soc/ralink/mt7620-wm8960.c +@@ -0,0 +1,125 @@ ++/* ++ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * published by the Free Software Foundation. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ */ ++ ++#include <linux/module.h> ++#include <linux/moduleparam.h> ++#include <linux/of.h> ++#include <linux/timer.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <sound/core.h> ++#include <sound/pcm.h> ++#include <sound/soc.h> ++ ++ ++static const struct snd_soc_dapm_widget mt7620_wm8960_widgets[] = { ++ SND_SOC_DAPM_SPK("Speaker", NULL), ++}; ++ ++static const struct snd_soc_dapm_route mt7620_wm8960_routes[] = { ++ {"Speaker", NULL, "HP_L"}, ++ {"Speaker", NULL, "HP_R"}, ++}; ++ ++#define MT7620_DAIFMT (SND_SOC_DAIFMT_I2S | \ ++ SND_SOC_DAIFMT_NB_NF | \ ++ SND_SOC_DAIFMT_CBM_CFM) ++ ++static int mt7620_wm8960_codec_init(struct snd_soc_pcm_runtime *rtd) ++{ ++ struct snd_soc_codec *codec = rtd->codec; ++ struct snd_soc_dai *cpu_dai = rtd->cpu_dai; ++ struct snd_soc_dapm_context *dapm = &codec->dapm; ++ int ret; ++ ++ snd_soc_dapm_enable_pin(dapm, "HP_L"); ++ snd_soc_dapm_enable_pin(dapm, "HP_R"); ++ ++ ret = snd_soc_dai_set_fmt(cpu_dai, MT7620_DAIFMT); ++ if (ret < 0) { ++ dev_err(codec->dev, "Failed to set cpu dai format: %d\n", ret); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static struct snd_soc_dai_link mt7620_wm8960_dai = { ++ .name = "mt7620", ++ .stream_name = "mt7620", ++ .init = mt7620_wm8960_codec_init, ++ .codec_dai_name = "wm8960-hifi", ++}; ++ ++static struct snd_soc_card mt7620_wm8960 = { ++ .name = "mt7620-wm8960", ++ .owner = THIS_MODULE, ++ .dai_link = &mt7620_wm8960_dai, ++ .num_links = 1, ++ ++ .dapm_widgets = mt7620_wm8960_widgets, ++ .num_dapm_widgets = ARRAY_SIZE(mt7620_wm8960_widgets), ++ .dapm_routes = mt7620_wm8960_routes, ++ .num_dapm_routes = ARRAY_SIZE(mt7620_wm8960_routes), ++}; ++ ++static int mt7620_wm8960_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct snd_soc_card *card = &mt7620_wm8960; ++ int ret; ++ ++ card->dev = &pdev->dev; ++ ++ mt7620_wm8960_dai.cpu_of_node = of_parse_phandle(np, "cpu-dai", 0); ++ mt7620_wm8960_dai.codec_of_node = of_parse_phandle(np, "codec-dai", 0); ++ mt7620_wm8960_dai.platform_of_node = mt7620_wm8960_dai.cpu_of_node; ++ ++ ret = snd_soc_register_card(card); ++ if (ret) { ++ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n", ++ ret); ++ } ++ return ret; ++} ++ ++static int mt7620_wm8960_remove(struct platform_device *pdev) ++{ ++ struct snd_soc_card *card = platform_get_drvdata(pdev); ++ ++ snd_soc_unregister_card(card); ++ return 0; ++} ++ ++static const struct of_device_id mt7620_audio_match[] = { ++ { .compatible = "ralink,wm8960-audio" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, mt7620_audio_match); ++ ++static struct platform_driver mt7620_wm8960_driver = { ++ .driver = { ++ .name = "wm8960-audio", ++ .owner = THIS_MODULE, ++ .of_match_table = mt7620_audio_match, ++ }, ++ .probe = mt7620_wm8960_probe, ++ .remove = mt7620_wm8960_remove, ++}; ++ ++module_platform_driver(mt7620_wm8960_driver); ++ ++MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); ++MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS("platform:qi-lb60-audio"); +diff --git a/sound/soc/soc-io.c b/sound/soc/soc-io.c +index aa886cc..3fdc8c8 100644 +--- a/sound/soc/soc-io.c ++++ b/sound/soc/soc-io.c +@@ -19,7 +19,6 @@ + + #include <trace/events/asoc.h> + +-#ifdef CONFIG_REGMAP + static int hw_write(struct snd_soc_codec *codec, unsigned int reg, + unsigned int value) + { +@@ -135,12 +134,3 @@ int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec, + return PTR_ERR_OR_ZERO(codec->control_data); + } + EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io); +-#else +-int snd_soc_codec_set_cache_io(struct snd_soc_codec *codec, +- int addr_bits, int data_bits, +- enum snd_soc_control_type control) +-{ +- return -ENOTSUPP; +-} +-EXPORT_SYMBOL_GPL(snd_soc_codec_set_cache_io); +-#endif +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0056-watchdog-add-MT7621-support.patch b/target/linux/ramips/patches-3.14/0056-watchdog-add-MT7621-support.patch new file mode 100644 index 0000000000..5ddbcd5e50 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0056-watchdog-add-MT7621-support.patch @@ -0,0 +1,237 @@ +From 6a42dd698ddf91b6e9902b17e21dc13c6ae412ff Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 05:24:42 +0000 +Subject: [PATCH 56/57] watchdog: add MT7621 support + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/watchdog/Kconfig | 7 ++ + drivers/watchdog/Makefile | 1 + + drivers/watchdog/mt7621_wdt.c | 185 +++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 193 insertions(+) + create mode 100644 drivers/watchdog/mt7621_wdt.c + +diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig +index 79d2589..40f4e5d 100644 +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -1193,6 +1193,13 @@ config RALINK_WDT + help + Hardware driver for the Ralink SoC Watchdog Timer. + ++config MT7621_WDT ++ tristate "Mediatek SoC watchdog" ++ select WATCHDOG_CORE ++ depends on SOC_MT7620 || SOC_MT7621 ++ help ++ Hardware driver for the Ralink SoC Watchdog Timer. ++ + # PARISC Architecture + + # POWERPC Architecture +diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile +index 985a66c..bbd5d0d 100644 +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -138,6 +138,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o + octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o + obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o + obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o ++obj-$(CONFIG_MT7621_WDT) += mt7621_wdt.o + + # PARISC Architecture + +diff --git a/drivers/watchdog/mt7621_wdt.c b/drivers/watchdog/mt7621_wdt.c +new file mode 100644 +index 0000000..29f55c2 +--- /dev/null ++++ b/drivers/watchdog/mt7621_wdt.c +@@ -0,0 +1,185 @@ ++/* ++ * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer ++ * ++ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org> ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ * ++ * This driver was based on: drivers/watchdog/softdog.c ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/clk.h> ++#include <linux/reset.h> ++#include <linux/module.h> ++#include <linux/kernel.h> ++#include <linux/watchdog.h> ++#include <linux/miscdevice.h> ++#include <linux/moduleparam.h> ++#include <linux/platform_device.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++ ++#define SYSC_RSTSTAT 0x38 ++#define WDT_RST_CAUSE BIT(1) ++ ++#define RALINK_WDT_TIMEOUT 30 ++ ++#define TIMER_REG_TMRSTAT 0x00 ++#define TIMER_REG_TMR1LOAD 0x24 ++#define TIMER_REG_TMR1CTL 0x20 ++ ++#define TMR1CTL_ENABLE BIT(7) ++#define TMR1CTL_RESTART BIT(9) ++ ++static void __iomem *mt762x_wdt_base; ++ ++static bool nowayout = WATCHDOG_NOWAYOUT; ++module_param(nowayout, bool, 0); ++MODULE_PARM_DESC(nowayout, ++ "Watchdog cannot be stopped once started (default=" ++ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); ++ ++static inline void rt_wdt_w32(unsigned reg, u32 val) ++{ ++ iowrite32(val, mt762x_wdt_base + reg); ++} ++ ++static inline u32 rt_wdt_r32(unsigned reg) ++{ ++ return ioread32(mt762x_wdt_base + reg); ++} ++ ++static int mt762x_wdt_ping(struct watchdog_device *w) ++{ ++ rt_wdt_w32(TIMER_REG_TMRSTAT, TMR1CTL_RESTART); ++ ++ return 0; ++} ++ ++static int mt762x_wdt_set_timeout(struct watchdog_device *w, unsigned int t) ++{ ++ w->timeout = t; ++ rt_wdt_w32(TIMER_REG_TMR1LOAD, t * 1000); ++ mt762x_wdt_ping(w); ++ ++ return 0; ++} ++ ++static int mt762x_wdt_start(struct watchdog_device *w) ++{ ++ u32 t; ++ ++ rt_wdt_w32(TIMER_REG_TMR1CTL, 1000 << 16); ++ mt762x_wdt_set_timeout(w, w->timeout); ++ ++ t = rt_wdt_r32(TIMER_REG_TMR1CTL); ++ t |= TMR1CTL_ENABLE; ++ rt_wdt_w32(TIMER_REG_TMR1CTL, t); ++ ++ return 0; ++} ++ ++static int mt762x_wdt_stop(struct watchdog_device *w) ++{ ++ u32 t; ++ ++ mt762x_wdt_ping(w); ++ ++ t = rt_wdt_r32(TIMER_REG_TMR1CTL); ++ t &= ~TMR1CTL_ENABLE; ++ rt_wdt_w32(TIMER_REG_TMR1CTL, t); ++ ++ return 0; ++} ++ ++static int mt762x_wdt_bootcause(void) ++{ ++ if (rt_sysc_r32(SYSC_RSTSTAT) & WDT_RST_CAUSE) ++ return WDIOF_CARDRESET; ++ ++ return 0; ++} ++ ++static struct watchdog_info mt762x_wdt_info = { ++ .identity = "Mediatek Watchdog", ++ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE, ++}; ++ ++static struct watchdog_ops mt762x_wdt_ops = { ++ .owner = THIS_MODULE, ++ .start = mt762x_wdt_start, ++ .stop = mt762x_wdt_stop, ++ .ping = mt762x_wdt_ping, ++ .set_timeout = mt762x_wdt_set_timeout, ++}; ++ ++static struct watchdog_device mt762x_wdt_dev = { ++ .info = &mt762x_wdt_info, ++ .ops = &mt762x_wdt_ops, ++ .min_timeout = 1, ++}; ++ ++static int mt762x_wdt_probe(struct platform_device *pdev) ++{ ++ struct resource *res; ++ int ret; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ mt762x_wdt_base = devm_request_and_ioremap(&pdev->dev, res); ++ if (IS_ERR(mt762x_wdt_base)) ++ return PTR_ERR(mt762x_wdt_base); ++ ++ device_reset(&pdev->dev); ++ ++ mt762x_wdt_dev.dev = &pdev->dev; ++ mt762x_wdt_dev.bootstatus = mt762x_wdt_bootcause(); ++ mt762x_wdt_dev.max_timeout = (0xfffful / 1000); ++ mt762x_wdt_dev.timeout = mt762x_wdt_dev.max_timeout; ++ ++ watchdog_set_nowayout(&mt762x_wdt_dev, nowayout); ++ ++ ret = watchdog_register_device(&mt762x_wdt_dev); ++ if (!ret) ++ dev_info(&pdev->dev, "Initialized\n"); ++ ++ return 0; ++} ++ ++static int mt762x_wdt_remove(struct platform_device *pdev) ++{ ++ watchdog_unregister_device(&mt762x_wdt_dev); ++ ++ return 0; ++} ++ ++static void mt762x_wdt_shutdown(struct platform_device *pdev) ++{ ++ mt762x_wdt_stop(&mt762x_wdt_dev); ++} ++ ++static const struct of_device_id mt762x_wdt_match[] = { ++ { .compatible = "mtk,mt7621-wdt" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, mt762x_wdt_match); ++ ++static struct platform_driver mt762x_wdt_driver = { ++ .probe = mt762x_wdt_probe, ++ .remove = mt762x_wdt_remove, ++ .shutdown = mt762x_wdt_shutdown, ++ .driver = { ++ .name = KBUILD_MODNAME, ++ .owner = THIS_MODULE, ++ .of_match_table = mt762x_wdt_match, ++ }, ++}; ++ ++module_platform_driver(mt762x_wdt_driver); ++ ++MODULE_DESCRIPTION("MediaTek MT762x hardware watchdog driver"); ++MODULE_AUTHOR("John Crispin <blogic@openwrt.org"); ++MODULE_LICENSE("GPL v2"); ++MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0057-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-3.14/0057-uvc-add-iPassion-iP2970-support.patch new file mode 100644 index 0000000000..89e46b904d --- /dev/null +++ b/target/linux/ramips/patches-3.14/0057-uvc-add-iPassion-iP2970-support.patch @@ -0,0 +1,257 @@ +From 0d3e92b4d3e2160873b610aabd46bbc4853ff82e Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Thu, 19 Sep 2013 01:50:59 +0200 +Subject: [PATCH 57/57] uvc: add iPassion iP2970 support + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/media/usb/uvc/uvc_driver.c | 14 ++++ + drivers/media/usb/uvc/uvc_status.c | 2 + + drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++ + drivers/media/usb/uvc/uvcvideo.h | 3 + + 4 files changed, 166 insertions(+) + +diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c +index c3bb250..c6612d4 100644 +--- a/drivers/media/usb/uvc/uvc_driver.c ++++ b/drivers/media/usb/uvc/uvc_driver.c +@@ -2467,6 +2467,20 @@ static struct usb_device_id uvc_ids[] = { + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX + | UVC_QUIRK_IGNORE_SELECTOR_UNIT }, ++ ++/* iPassion iP2970 */ ++ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE ++ | USB_DEVICE_ID_MATCH_INT_INFO, ++ .idVendor = 0x1B3B, ++ .idProduct = 0x2970, ++ .bInterfaceClass = USB_CLASS_VIDEO, ++ .bInterfaceSubClass = 1, ++ .bInterfaceProtocol = 0, ++ .driver_info = UVC_QUIRK_PROBE_MINMAX ++ | UVC_QUIRK_STREAM_NO_FID ++ | UVC_QUIRK_MOTION ++ | UVC_QUIRK_SINGLE_ISO }, ++ + /* Generic USB Video Class */ + { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) }, + {} +diff --git a/drivers/media/usb/uvc/uvc_status.c b/drivers/media/usb/uvc/uvc_status.c +index f552ab9..7132ad4 100644 +--- a/drivers/media/usb/uvc/uvc_status.c ++++ b/drivers/media/usb/uvc/uvc_status.c +@@ -139,6 +139,7 @@ static void uvc_status_complete(struct urb *urb) + switch (dev->status[0] & 0x0f) { + case UVC_STATUS_TYPE_CONTROL: + uvc_event_control(dev, dev->status, len); ++ dev->motion = 1; + break; + + case UVC_STATUS_TYPE_STREAMING: +@@ -182,6 +183,7 @@ int uvc_status_init(struct uvc_device *dev) + } + + pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress); ++ dev->motion = 0; + + /* For high-speed interrupt endpoints, the bInterval value is used as + * an exponent of two. Some developers forgot about it. +diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c +index 898c208..2e06163 100644 +--- a/drivers/media/usb/uvc/uvc_video.c ++++ b/drivers/media/usb/uvc/uvc_video.c +@@ -21,6 +21,11 @@ + #include <linux/wait.h> + #include <linux/atomic.h> + #include <asm/unaligned.h> ++#include <linux/skbuff.h> ++#include <linux/kobject.h> ++#include <linux/netlink.h> ++#include <linux/kobject.h> ++#include <linux/workqueue.h> + + #include <media/v4l2-common.h> + +@@ -1075,9 +1080,149 @@ static void uvc_video_decode_data(struct uvc_streaming *stream, + } + } + ++struct bh_priv { ++ unsigned long seen; ++}; ++ ++struct bh_event { ++ const char *name; ++ struct sk_buff *skb; ++ struct work_struct work; ++}; ++ ++#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args ) ++#define BH_DBG(fmt, args...) do {} while (0) ++#define BH_SKB_SIZE 2048 ++ ++extern u64 uevent_next_seqnum(void); ++static int seen = 0; ++ ++static int bh_event_add_var(struct bh_event *event, int argv, ++ const char *format, ...) ++{ ++ static char buf[128]; ++ char *s; ++ va_list args; ++ int len; ++ ++ if (argv) ++ return 0; ++ ++ va_start(args, format); ++ len = vsnprintf(buf, sizeof(buf), format, args); ++ va_end(args); ++ ++ if (len >= sizeof(buf)) { ++ BH_ERR("buffer size too small\n"); ++ WARN_ON(1); ++ return -ENOMEM; ++ } ++ ++ s = skb_put(event->skb, len + 1); ++ strcpy(s, buf); ++ ++ BH_DBG("added variable '%s'\n", s); ++ ++ return 0; ++} ++ ++static int motion_hotplug_fill_event(struct bh_event *event) ++{ ++ int s = jiffies; ++ int ret; ++ ++ if (!seen) ++ seen = jiffies; ++ ++ ret = bh_event_add_var(event, 0, "HOME=%s", "/"); ++ if (ret) ++ return ret; ++ ++ ret = bh_event_add_var(event, 0, "PATH=%s", ++ "/sbin:/bin:/usr/sbin:/usr/bin"); ++ if (ret) ++ return ret; ++ ++ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb"); ++ if (ret) ++ return ret; ++ ++ ret = bh_event_add_var(event, 0, "ACTION=motion"); ++ if (ret) ++ return ret; ++ ++ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen); ++ if (ret) ++ return ret; ++ seen = s; ++ ++ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum()); ++ ++ return ret; ++} ++ ++static void motion_hotplug_work(struct work_struct *work) ++{ ++ struct bh_event *event = container_of(work, struct bh_event, work); ++ int ret = 0; ++ ++ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL); ++ if (!event->skb) ++ goto out_free_event; ++ ++ ret = bh_event_add_var(event, 0, "%s@", "add"); ++ if (ret) ++ goto out_free_skb; ++ ++ ret = motion_hotplug_fill_event(event); ++ if (ret) ++ goto out_free_skb; ++ ++ NETLINK_CB(event->skb).dst_group = 1; ++ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL); ++ ++out_free_skb: ++ if (ret) { ++ BH_ERR("work error %d\n", ret); ++ kfree_skb(event->skb); ++ } ++out_free_event: ++ kfree(event); ++} ++ ++static int motion_hotplug_create_event(void) ++{ ++ struct bh_event *event; ++ ++ event = kzalloc(sizeof(*event), GFP_KERNEL); ++ if (!event) ++ return -ENOMEM; ++ ++ event->name = "motion"; ++ ++ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work); ++ schedule_work(&event->work); ++ ++ return 0; ++} ++ ++#define MOTION_FLAG_OFFSET 4 + static void uvc_video_decode_end(struct uvc_streaming *stream, + struct uvc_buffer *buf, const __u8 *data, int len) + { ++ if ((stream->dev->quirks & UVC_QUIRK_MOTION) && ++ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) { ++ u8 *mem; ++ buf->state = UVC_BUF_STATE_READY; ++ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET); ++ if ( stream->dev->motion ) { ++ stream->dev->motion = 0; ++ motion_hotplug_create_event(); ++ } else { ++ *mem &= 0x7f; ++ } ++ } ++ + /* Mark the buffer as done if the EOF marker is set. */ + if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); +@@ -1478,6 +1623,8 @@ static int uvc_init_video_isoc(struct uvc_streaming *stream, + if (npackets == 0) + return -ENOMEM; + ++ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO) ++ npackets = 1; + size = npackets * psize; + + for (i = 0; i < UVC_URBS; ++i) { +diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h +index 9e35982..3cacdfd 100644 +--- a/drivers/media/usb/uvc/uvcvideo.h ++++ b/drivers/media/usb/uvc/uvcvideo.h +@@ -137,6 +137,8 @@ + #define UVC_QUIRK_FIX_BANDWIDTH 0x00000080 + #define UVC_QUIRK_PROBE_DEF 0x00000100 + #define UVC_QUIRK_RESTRICT_FRAME_RATE 0x00000200 ++#define UVC_QUIRK_MOTION 0x00000400 ++#define UVC_QUIRK_SINGLE_ISO 0x00000800 + + /* Format flags */ + #define UVC_FMT_FLAG_COMPRESSED 0x00000001 +@@ -539,6 +541,7 @@ struct uvc_device { + __u8 *status; + struct input_dev *input; + char input_phys[64]; ++ int motion; + }; + + enum uvc_handle_state { +-- +1.7.10.4 + diff --git a/target/linux/ramips/patches-3.14/0100-mtd-split-remove-padding.patch b/target/linux/ramips/patches-3.14/0100-mtd-split-remove-padding.patch new file mode 100644 index 0000000000..9c5a728995 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0100-mtd-split-remove-padding.patch @@ -0,0 +1,13 @@ +--- a/drivers/mtd/mtdpart.c ++++ b/drivers/mtd/mtdpart.c +@@ -805,10 +805,6 @@ static void split_uimage(struct mtd_info + return; + + len = be32_to_cpu(hdr.size) + 0x40; +- len = mtd_pad_erasesize(master, part->offset, len); +- if (len + master->erasesize > part->mtd.size) +- return; +- + __mtd_add_partition(master, "rootfs", part->offset + len, + part->mtd.size - len, false); + } diff --git a/target/linux/ramips/patches-3.14/0101-mtd-add-rtn56u-support.patch b/target/linux/ramips/patches-3.14/0101-mtd-add-rtn56u-support.patch new file mode 100644 index 0000000000..f48c7cbf97 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0101-mtd-add-rtn56u-support.patch @@ -0,0 +1,28 @@ +--- a/drivers/mtd/mtdpart.c ++++ b/drivers/mtd/mtdpart.c +@@ -793,8 +793,11 @@ static void split_uimage(struct mtd_info + { + struct { + __be32 magic; +- __be32 pad[2]; ++ __be32 pad0[2]; + __be32 size; ++ __be32 pad1[4]; ++ __be32 name[7]; ++ __be32 kern_size; + } hdr; + size_t len; + +@@ -804,7 +807,11 @@ static void split_uimage(struct mtd_info + if (len != sizeof(hdr) || hdr.magic != cpu_to_be32(UBOOT_MAGIC)) + return; + +- len = be32_to_cpu(hdr.size) + 0x40; ++ if (hdr.kern_size != 0 && hdr.name[0] == 0) ++ len = be32_to_cpu(hdr.kern_size); ++ else ++ len = be32_to_cpu(hdr.size) + 0x40; ++ + __mtd_add_partition(master, "rootfs", part->offset + len, + part->mtd.size - len, false); + } diff --git a/target/linux/ramips/patches-3.14/0103-MIPS-OWRTDTB.patch b/target/linux/ramips/patches-3.14/0103-MIPS-OWRTDTB.patch new file mode 100644 index 0000000000..1a00dc2dd8 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0103-MIPS-OWRTDTB.patch @@ -0,0 +1,52 @@ +From c174d2250e402399ad7dbdd57d51883d8804bba0 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 15 Jul 2013 00:40:37 +0200 +Subject: [PATCH 31/33] owrt: MIPS: add OWRTDTB secion + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/kernel/head.S | 3 +++ + arch/mips/ralink/Makefile | 2 +- + arch/mips/ralink/of.c | 4 +++- + 3 files changed, 7 insertions(+), 2 deletions(-) + +--- a/arch/mips/kernel/head.S ++++ b/arch/mips/kernel/head.S +@@ -146,6 +146,9 @@ EXPORT(__image_cmdline) + .fill 0x400 + #endif /* CONFIG_IMAGE_CMDLINE_HACK */ + ++ .ascii "OWRTDTB:" ++ EXPORT(__image_dtb) ++ .fill 0x4000 + __REF + + NESTED(kernel_entry, 16, sp) # kernel entry point +--- a/arch/mips/ralink/Makefile ++++ b/arch/mips/ralink/Makefile +@@ -26,4 +26,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin + + obj-$(CONFIG_DEBUG_FS) += bootrom.o + +-obj-y += dts/ ++#obj-y += dts/ +--- a/arch/mips/ralink/of.c ++++ b/arch/mips/ralink/of.c +@@ -90,6 +90,8 @@ static int __init early_init_dt_find_mem + return 0; + } + ++extern struct boot_param_header __image_dtb; ++ + void __init plat_mem_setup(void) + { + set_io_port_base(KSEG1); +@@ -98,7 +100,7 @@ void __init plat_mem_setup(void) + * Load the builtin devicetree. This causes the chosen node to be + * parsed resulting in our memory appearing + */ +- __dt_setup_arch(&__dtb_start); ++ __dt_setup_arch(&__image_dtb); + + of_scan_flat_dt(early_init_dt_find_memory, NULL); + if (memory_dtb) diff --git a/target/linux/ramips/rt288x/config-3.14 b/target/linux/ramips/rt288x/config-3.14 new file mode 100644 index 0000000000..44bb31042a --- /dev/null +++ b/target/linux/ramips/rt288x/config-3.14 @@ -0,0 +1,167 @@ +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +# CONFIG_DTB_RT2880_EVAL is not set +CONFIG_DTB_RT_NONE=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK_8250 is not set +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_RALINK=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_MACH_CLKDEV=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=m +CONFIG_HZ_PERIODIC=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IP17XX_PHY=y +CONFIG_IRQCHIP=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_INTC=y +CONFIG_IRQ_WORK=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIPS=y +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=4 +CONFIG_MIPS_L1_CACHE_SHIFT_4=y +# CONFIG_MIPS_MACHINE is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_O32_FP64_SUPPORT is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_UIMAGE_SPLIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_RALINK=y +CONFIG_NET_RALINK_MDIO=y +CONFIG_NET_RALINK_MDIO_RT2880=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_PAGEFLAGS_EXTENDED=y +# CONFIG_PCI is not set +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PINCONF is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_RT2880=y +# CONFIG_PINCTRL_SINGLE is not set +# CONFIG_PREEMPT_RCU is not set +CONFIG_RALINK=y +# CONFIG_RALINK_USBPHY is not set +CONFIG_RALINK_WDT=y +CONFIG_RA_NAT_NONE=y +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_RESET_CONTROLLER=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RT288X=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SOC_MT7620 is not set +# CONFIG_SOC_MT7621 is not set +CONFIG_SOC_RT288X=y +# CONFIG_SOC_RT305X is not set +# CONFIG_SOC_RT3883 is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_RT2880=y +CONFIG_SWCONFIG=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_ZBUD is not set +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/rt305x/config-3.14 b/target/linux/ramips/rt305x/config-3.14 new file mode 100644 index 0000000000..0f78926132 --- /dev/null +++ b/target/linux/ramips/rt305x/config-3.14 @@ -0,0 +1,171 @@ +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKEVT_RT3352=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLKSRC_OF=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_DEBUG_PINCTRL=y +CONFIG_DMA_NONCOHERENT=y +# CONFIG_DTB_RT305X_EVAL is not set +CONFIG_DTB_RT_NONE=y +CONFIG_DTC=y +# CONFIG_DWC_OTG is not set +CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK_8250 is not set +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_RALINK=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_MACH_CLKDEV=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HW_RANDOM=m +CONFIG_HZ_PERIODIC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_INTC=y +CONFIG_IRQ_WORK=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIPS=y +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MACHINE is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_O32_FP64_SUPPORT is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_UIMAGE_SPLIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_RALINK=y +CONFIG_NET_RALINK_ESW_RT3052=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_NLS=m +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PINCONF is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_RT2880=y +# CONFIG_PINCTRL_SINGLE is not set +# CONFIG_PREEMPT_RCU is not set +CONFIG_RALINK=y +CONFIG_RALINK_USBPHY=y +CONFIG_RALINK_WDT=y +CONFIG_RA_NAT_NONE=y +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_RESET_CONTROLLER=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RT288X=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SOC_MT7620 is not set +# CONFIG_SOC_MT7621 is not set +# CONFIG_SOC_RT288X is not set +CONFIG_SOC_RT305X=y +# CONFIG_SOC_RT3883 is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_RT2880=y +CONFIG_SWCONFIG=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_USB=m +CONFIG_USB_COMMON=m +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_PHY=y +CONFIG_USB_SUPPORT=y +CONFIG_USE_OF=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_ZBUD is not set +CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/ramips/rt3883/config-3.14 b/target/linux/ramips/rt3883/config-3.14 new file mode 100644 index 0000000000..8093abc8e1 --- /dev/null +++ b/target/linux/ramips/rt3883/config-3.14 @@ -0,0 +1,183 @@ +CONFIG_AR8216_PHY=y +CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CEVT_R4K=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CMDLINE="rootfstype=squashfs,jffs2" +CONFIG_CMDLINE_BOOL=y +# CONFIG_CMDLINE_OVERRIDE is not set +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CSRC_R4K=y +CONFIG_DEBUG_PINCTRL=y +CONFIG_DMA_NONCOHERENT=y +# CONFIG_DTB_RT3883_EVAL is not set +CONFIG_DTB_RT_NONE=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK_8250 is not set +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_NET_UTILS=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_DEVRES=y +CONFIG_GPIO_RALINK=y +CONFIG_GPIO_SYSFS=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_ATTRS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_MACH_CLKDEV=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=m +CONFIG_HZ_PERIODIC=y +CONFIG_IMAGE_CMDLINE_HACK=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_CPU=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_INTC=y +CONFIG_IRQ_WORK=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIPS=y +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MACHINE is not set +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_O32_FP64_SUPPORT is not set +# CONFIG_MLX5_CORE is not set +CONFIG_MODULES_USE_ELF_REL=y +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_SEAMA_FW=y +CONFIG_MTD_UIMAGE_SPLIT=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NET_RALINK=y +CONFIG_NET_RALINK_MDIO=y +CONFIG_NET_RALINK_MDIO_RT2880=y +CONFIG_NET_RX_BUSY_POLL=y +CONFIG_NLS=m +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_MTD=y +CONFIG_OF_NET=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PHYLIB=y +# CONFIG_PINCONF is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_RT2880=y +# CONFIG_PINCTRL_SINGLE is not set +# CONFIG_PREEMPT_RCU is not set +CONFIG_RALINK=y +CONFIG_RALINK_USBPHY=y +CONFIG_RALINK_WDT=y +CONFIG_RA_NAT_NONE=y +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_RESET_CONTROLLER=y +CONFIG_RTL8366_SMI=y +CONFIG_RTL8367B_PHY=y +CONFIG_RTL8367_PHY=y +# CONFIG_SCSI_DMA is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RT288X=y +CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SOC_MT7620 is not set +# CONFIG_SOC_MT7621 is not set +# CONFIG_SOC_RT288X is not set +# CONFIG_SOC_RT305X is not set +CONFIG_SOC_RT3883=y +CONFIG_SPI=y +CONFIG_SPI_MASTER=y +CONFIG_SPI_RT2880=y +CONFIG_SWCONFIG=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_USB=m +CONFIG_USB_COMMON=m +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_PHY=y +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_USE_OF=y +CONFIG_WATCHDOG_CORE=y +# CONFIG_ZBUD is not set +CONFIG_ZONE_DMA_FLAG=0 |