diff options
| author | Hauke Mehrtens <hauke@openwrt.org> | 2013-02-04 22:40:57 +0000 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@openwrt.org> | 2013-02-04 22:40:57 +0000 |
| commit | 34e787e2f1a34bee7bec41e2dd4c5f69f2d96d3e (patch) | |
| tree | ed9e9cdc5c47d1cd0117900715f198fcc01e2b4a /target | |
| parent | b753276ff56d649265dda3422aeeba61359d3433 (diff) | |
| download | upstream-34e787e2f1a34bee7bec41e2dd4c5f69f2d96d3e.tar.gz upstream-34e787e2f1a34bee7bec41e2dd4c5f69f2d96d3e.tar.bz2 upstream-34e787e2f1a34bee7bec41e2dd4c5f69f2d96d3e.zip | |
Add Failsafe support for Linksys E3000V1 / WRT610NV2
Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2
in /lib/preinit/05_init_interfaces_brcm. The list of devices will need to
be expanded. Is there a way to determine the correct cpu_port to use in a
generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if
"/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists? Could
a similar method be used in "/etc/init.d/netconfig"?
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35491 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm index fd2a93526f..1275b03207 100644 --- a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm +++ b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm @@ -14,6 +14,7 @@ set_preinit_iface() { # hardware specific overrides case "$(cat /proc/diag/model)" in "Linksys WAP54G V1") ifname=eth1;; + "Linksys E3000 V1"|"Linksys WRT610N V2") cpu_port="8u*";; "ASUS WL-HDD") ifname=eth1;; "ASUS WL-300g") ifname=eth1;; "ASUS (unknown, BCM4702)") ifname=eth1;; |