[mvebu]: add initial 3.18 support

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43366 3c298f89-4303-0410-b956-a3cf2f4a3e73

5 files changed, 1012 insertions, 0 deletions

diff --git a/target/linux/mvebu/config-3.18 b/target/linux/mvebu/config-3.18
new file mode 100644
index 0000000000..ad3b0064ba
--- /dev/null
+++ b/target/linux/mvebu/config-3.18
@@ -0,0 +1,305 @@
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_AHCI_MVEBU is not set
+CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
+# CONFIG_CACHE_FEROCEON_L2 is not set
+CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_MVEBU=y
+# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+CONFIG_ARMADA_370_CLK=y
+CONFIG_ARMADA_370_XP_TIMER=y
+CONFIG_ARMADA_XP_CLK=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+# CONFIG_ARM_CPU_SUSPEND is not set
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_NR_BANKS=8
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
+CONFIG_ATAGS=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BOUNCE=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CACHE_PL310=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLKSRC_OF=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_COMMON_CLK=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BIG_ENDIAN is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PJ4B=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_XZ=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL=y
+CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
+# CONFIG_DEBUG_LL_UART_8250 is not set
+# CONFIG_DEBUG_LL_UART_PL01X is not set
+CONFIG_DEBUG_MVEBU_UART=y
+# CONFIG_DEBUG_MVEBU_UART_ALTERNATE is not set
+CONFIG_DEBUG_UART_8250=y
+# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
+CONFIG_DEBUG_UART_8250_SHIFT=2
+# CONFIG_DEBUG_UART_8250_WORD is not set
+CONFIG_DEBUG_UART_PHYS=0xd0012000
+# CONFIG_DEBUG_UART_PL01X is not set
+CONFIG_DEBUG_UART_VIRT=0xfec12000
+CONFIG_DEBUG_UNCOMPRESS=y
+CONFIG_DEBUG_USER=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_ENGINE_RAID=y
+CONFIG_DMA_OF=y
+CONFIG_DTC=y
+# CONFIG_DW_DMAC_CORE is not set
+# CONFIG_DW_DMAC_PCI is not set
+CONFIG_EARLY_PRINTK=y
+CONFIG_FIXED_PHY=y
+CONFIG_FRAME_POINTER=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_CHIP=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_NET_UTILS=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_DEVRES=y
+CONFIG_GPIO_GENERIC=y
+CONFIG_GPIO_MVEBU=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_BPF_JIT=y
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_ATTRS=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_LZ4=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_HAVE_KERNEL_LZO=y
+CONFIG_HAVE_KERNEL_XZ=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IOMMU_HELPER=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+# CONFIG_IWMMXT is not set
+CONFIG_KTIME_SCALAR=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MACH_ARMADA_370=y
+CONFIG_MACH_ARMADA_370_XP=y
+# CONFIG_MACH_ARMADA_375 is not set
+# CONFIG_MACH_ARMADA_38X is not set
+CONFIG_MACH_ARMADA_XP=y
+# CONFIG_MACH_DOVE is not set
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MDIO_BOARDINFO=y
+CONFIG_MEMORY=y
+CONFIG_MIGHT_HAVE_PCI=y
+# CONFIG_MLX5_CORE is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_PXA3xx=y
+# CONFIG_MTD_SM_COMMON is not set
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_MVEBU_CLK_COMMON=y
+CONFIG_MVEBU_CLK_COREDIV=y
+CONFIG_MVEBU_CLK_CPU=y
+CONFIG_MVEBU_DEVBUS=y
+CONFIG_MVEBU_MBUS=y
+CONFIG_MVMDIO=y
+CONFIG_MVNETA=y
+CONFIG_MV_XOR=y
+CONFIG_NEED_DMA_MAP_STATE=y
+# CONFIG_NEON is not set
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_RX_BUSY_POLL=y
+CONFIG_NO_BOOTMEM=y
+CONFIG_NR_CPUS=4
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_MTD=y
+CONFIG_OF_NET=y
+CONFIG_OF_PCI=y
+CONFIG_OF_PCI_IRQ=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MVEBU=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PHYLIB=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_ARMADA_370=y
+CONFIG_PINCTRL_ARMADA_XP=y
+CONFIG_PINCTRL_MVEBU=y
+# CONFIG_PINCTRL_SINGLE is not set
+CONFIG_PJ4B_ERRATA_4742=y
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+# CONFIG_PL310_ERRATA_753970 is not set
+# CONFIG_PL310_ERRATA_769419 is not set
+CONFIG_PLAT_ORION=y
+# CONFIG_PREEMPT_RCU is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_MV is not set
+CONFIG_SCHED_HRTICK=y
+# CONFIG_SCSI_DMA is not set
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_ORION=y
+CONFIG_STOP_MACHINE=y
+CONFIG_SWIOTLB=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_STATS=y
+CONFIG_TREE_RCU=y
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_XZ=y
+CONFIG_UBIFS_FS_ZLIB=y
+CONFIG_UID16=y
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB_SUPPORT=y
+# CONFIG_USB_XHCI_MVEBU is not set
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_XEN is not set
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+# CONFIG_ZBUD is not set
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/mvebu/patches-3.18/001-build_mamba_dts.patch b/target/linux/mvebu/patches-3.18/001-build_mamba_dts.patch
new file mode 100644
index 0000000000..cb27ccd621
--- /dev/null
+++ b/target/linux/mvebu/patches-3.18/001-build_mamba_dts.patch
@@ -0,0 +1,10 @@
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -506,6 +506,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \
+ 	armada-xp-db.dtb \
+ 	armada-xp-gp.dtb \
+ 	armada-xp-lenovo-ix4-300d.dtb \
++	armada-xp-mamba.dtb \
+ 	armada-xp-matrix.dtb \
+ 	armada-xp-netgear-rn2120.dtb \
+ 	armada-xp-openblocks-ax3-4.dtb
diff --git a/target/linux/mvebu/patches-3.18/002-revert_i2c_delay.patch b/target/linux/mvebu/patches-3.18/002-revert_i2c_delay.patch
new file mode 100644
index 0000000000..77dc1a6383
--- /dev/null
+++ b/target/linux/mvebu/patches-3.18/002-revert_i2c_delay.patch
@@ -0,0 +1,15 @@
+--- a/arch/arm/boot/dts/armada-xp.dtsi
++++ b/arch/arm/boot/dts/armada-xp.dtsi
+@@ -43,12 +43,10 @@
+ 			};
+ 
+ 			i2c0: i2c@11000 {
+-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ 				reg = <0x11000 0x100>;
+ 			};
+ 
+ 			i2c1: i2c@11100 {
+-				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
+ 				reg = <0x11100 0x100>;
+ 			};
+ 
diff --git a/target/linux/mvebu/patches-3.18/003-add_leds_tlc59116_driver.patch b/target/linux/mvebu/patches-3.18/003-add_leds_tlc59116_driver.patch
new file mode 100644
index 0000000000..cb9f1572d1
--- /dev/null
+++ b/target/linux/mvebu/patches-3.18/003-add_leds_tlc59116_driver.patch
@@ -0,0 +1,529 @@
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -505,6 +505,15 @@ config LEDS_VERSATILE
+ 	  This option enabled support for the LEDs on the ARM Versatile
+ 	  and RealView boards. Say Y to enabled these.
+ 
++config LEDS_TLC59116
++	tristate "LED driver for TLC59116F dimmer"
++	depends on LEDS_CLASS
++	depends on I2C
++	help
++	  This option enables support for Texas Instruments TLC59116F
++	  LED controller. It is generally only useful
++	  as a platform driver
++
+ comment "LED Triggers"
+ source "drivers/leds/trigger/Kconfig"
+ 
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -56,6 +56,7 @@ obj-$(CONFIG_LEDS_BLINKM)		+= leds-blink
+ obj-$(CONFIG_LEDS_SYSCON)		+= leds-syscon.o
+ obj-$(CONFIG_LEDS_VERSATILE)		+= leds-versatile.o
+ obj-$(CONFIG_LEDS_MENF21BMC)		+= leds-menf21bmc.o
++obj-$(CONFIG_LEDS_TLC59116)		+= leds-tlc59116.o
+ 
+ # LED SPI Drivers
+ obj-$(CONFIG_LEDS_DAC124S085)		+= leds-dac124s085.o
+--- /dev/null
++++ b/drivers/leds/leds-tlc59116.c
+@@ -0,0 +1,498 @@
++/*
++ * Copyright 2014 Belkin Inc.
++ *
++ * Author: Belkin Inc.
++ *
++ * This file is subject to the terms and conditions of version 2 of
++ * the GNU General Public License.  See the file COPYING in the main
++ * directory of this archive for more details.
++ *
++ * LED driver for various TLC59116 I2C LED drivers
++  */
++
++#include <linux/module.h>
++#include <linux/delay.h>
++#include <linux/string.h>
++#include <linux/ctype.h>
++#include <linux/leds.h>
++#include <linux/err.h>
++#include <linux/i2c.h>
++#include <linux/workqueue.h>
++
++/* LED select registers determine the source that drives LED outputs */
++#define TLC59116_LED_OFF	0x0	/* Output LOW */
++#define TLC59116_LED_ON	0x1	/* Output HI-Z */
++#define TLC59116_DIM	0x2	/* Dimming */
++#define TLC59116_BLINK	0x3	/* Blinking */
++
++#define TLC59116_PINS		16
++#define TLC59116_REG_MODE1	0x00	/* Mode register 0 */
++#define MODE1_RESPON_ADDR_MASK	0xF0
++#define MODE1_NORMAL_MODE	(0 << 4)
++#define MODE1_SPEED_MODE	(1 << 4)
++
++#define TLC59116_REG_MODE2	0x01	/* Mode register 1 */
++#define MODE2_DIM		(0 << 5)
++#define MODE2_BLINK		(1 << 5)
++#define MODE2_OCH_STOP                  (0 << 3)
++#define MODE2_OCH_ACK                   (1 << 3)
++
++#define TLC59116_REG_PWM0	0x02
++#define TLC59116_REG_PWM1	0x03
++#define TLC59116_REG_PWM2	0x04
++#define TLC59116_REG_PWM3	0x05
++#define TLC59116_REG_PWM4	0x06
++#define TLC59116_REG_PWM5	0x07
++#define TLC59116_REG_PWM6	0x08
++#define TLC59116_REG_PWM7	0x09
++#define TLC59116_REG_PWM8	0x0a
++#define TLC59116_REG_PWM9	0x0b
++#define TLC59116_REG_PWM10	0x0c
++#define TLC59116_REG_PWM11	0x0d
++#define TLC59116_REG_PWM12	0x0e
++#define TLC59116_REG_PWM13	0x0f
++#define TLC59116_REG_PWM14	0x10
++#define TLC59116_REG_PWM15	0x01
++
++#define TLC59116_REG_GRPPWM	0x12
++#define TLC59116_REG_GRPFREQ	0x13
++
++#define TLC59116_PERIOD_MIN	41	/* 41ms */
++#define TLC59116_PERIOD_MAX	10730	/* 10.73s */
++
++#define TLC59116_REG_LEDOUT0         0x14    /* LED [3:0] driver output state registers */              
++#define TLC59116_REG_LEDOUT1         0x15    /* LED [7:4] driver output state registers */
++#define TLC59116_REG_LEDOUT2         0x16    /* LED [11:8] driver output state registers */
++#define TLC59116_REG_LEDOUT3         0x17    /* LED [15:12] driver output state registers */
++
++#define GPIO0_MASK        0x3
++
++#define DEBUG 0
++
++#if DEBUG > 1
++#define led_dbg(fmt, arg...) printk(KERN_DEBUG "tlc59116:%s " fmt "\n", __func__ , ## arg)
++#else
++#define led_dbg(fmt, arg...)
++#endif
++
++
++#if DEBUG > 0
++#define led_info(fmt, arg...) printk("tlc59116:%s " fmt "\n", __func__ , ## arg)
++#else
++#define led_info(fmt, arg...)
++#endif
++
++enum tlc59116_type {
++	tlc59116,
++};
++
++struct tlc59116_chipdef {
++	int			bits;
++	u8			slv_addr;	/* 7-bit slave address mask */
++	int			slv_addr_shift;	/* Number of bits to ignore */
++};
++
++static struct tlc59116_chipdef tlc59116_chipdefs[] = {
++	[tlc59116] = {
++		.bits		= 16,
++		.slv_addr	= /* 1100xxx */ 0x68,
++		.slv_addr_shift	= 3,
++	},
++};
++
++static const struct i2c_device_id tlc59116_id[] = {
++	{ "tlc59116", tlc59116 },
++	{ }
++};
++MODULE_DEVICE_TABLE(i2c, tlc59116_id);
++
++struct tlc59116_led {
++	struct tlc59116_chipdef	*chipdef;
++	struct i2c_client	*client;
++	struct work_struct	work;
++	spinlock_t		lock;
++	enum led_brightness	brightness;
++	struct led_classdev	led_cdev;
++	int			led_num;	/* 0 .. 8 potentially */
++	char			name[32];
++};
++
++//#define DUMP_REGS
++
++#ifdef DUMP_REGS
++void dump_regs(struct i2c_client *client)
++{
++        int i, j = 0;
++        u8 data;
++        printk ("\n-------------------------------------\n");
++        for (i = 0; i< 0x20; i++)
++        {
++                data = i2c_smbus_read_byte_data(client, i);
++		printk ("[0x%x] = 0x%x ",i, data);
++                j++;
++                if (j == 5)
++                {
++                        printk ("\n");
++                        j = 0;
++                }
++        }
++        printk ("\n");
++}
++#endif
++
++static int tlc59116_set_mode(struct i2c_client *client, uint8_t mode)
++{
++	uint8_t val = 0;
++	
++	if ((mode != MODE2_DIM) && (mode != MODE2_BLINK))
++		mode = MODE2_DIM;
++
++	/* Configure MODE1 register */
++	val &= 0x0;
++	val &= MODE1_RESPON_ADDR_MASK;
++	val |= MODE1_NORMAL_MODE;
++        i2c_smbus_write_byte_data(client, TLC59116_REG_MODE1, val);
++
++        /* Configure MODE2 Reg */
++        val &= 0x00;
++        val |= MODE2_OCH_STOP;
++
++        val |= mode;
++
++        i2c_smbus_write_byte_data(client, TLC59116_REG_MODE2, val);
++        mdelay(100);
++	
++	return 0;
++}
++
++static int tlc59116_set_gpio_act(struct i2c_client *client, u8 gpio_no, u8 act_mode)
++{
++        char data, addr = 0, i;
++
++        if ((gpio_no >= 0) && (gpio_no < 4))
++                addr = TLC59116_REG_LEDOUT0;
++        else if ((gpio_no >= 4) && (gpio_no < 8))
++                addr = TLC59116_REG_LEDOUT1;
++        else if ((gpio_no >= 8) && (gpio_no < 12))
++                addr = TLC59116_REG_LEDOUT2;
++        else if ((gpio_no >=12 ) && (gpio_no < 16))
++                addr = TLC59116_REG_LEDOUT3;
++
++        data = i2c_smbus_read_byte_data(client, addr);
++
++        i = (gpio_no % 4) * 2;
++
++        data &= ~(GPIO0_MASK << i);
++        act_mode = act_mode << i;
++        data |= act_mode;
++
++        if(i2c_smbus_write_byte_data(client, addr, data) != 0) {
++                return -1;
++        }
++        return 0;
++}
++
++static int tlc59116_set_gpio(struct i2c_client *client, uint8_t gpio_no, uint8_t val)
++{
++	val &= 0x03;
++        tlc59116_set_gpio_act(client, gpio_no, val);
++#ifdef DUMP_REGS
++	dump_regs(client);
++#endif
++        return 0;
++}
++
++static int tlc59116_get_gpio(struct i2c_client *client, uint8_t gpio_no)
++{
++	uint8_t val, reg, data;
++	
++	led_dbg("gpio = %d\n", gpio_no);
++	reg = TLC59116_REG_LEDOUT0;
++
++        if ((gpio_no >= 0) && (gpio_no < 4))
++                reg = TLC59116_REG_LEDOUT0;
++        else if ((gpio_no >= 4) && (gpio_no < 8)) {
++                reg = TLC59116_REG_LEDOUT1;
++		gpio_no = gpio_no - 4;
++	}
++        else if ((gpio_no >= 8) && (gpio_no < 12)) {
++                reg = TLC59116_REG_LEDOUT2;
++		gpio_no = gpio_no - 8;
++	}
++        else if ((gpio_no >=12 ) && (gpio_no < 16)) {
++                reg = TLC59116_REG_LEDOUT3;
++		gpio_no = gpio_no - 12;
++	}
++	
++	val = i2c_smbus_read_byte_data(client, reg);
++
++	data = (val >> (gpio_no * 2)) & 0x03;
++	return data;
++}
++
++/*
++ * gpio_no [0..7]
++ * duty_cycle [0..99]%
++ * 
++ * */
++static int tlc59116_individual_brighness_control(struct i2c_client *client, uint8_t gpio_no, uint8_t brightness)
++{
++	uint8_t pwm;
++
++	pwm = gpio_no + TLC59116_REG_PWM0;
++        i2c_smbus_write_byte_data(client, pwm, brightness);
++
++        return 0;
++}
++
++static void tlc59116_led_work(struct work_struct *work)
++{
++	struct tlc59116_led *tlc59116;
++
++	tlc59116 = container_of(work, struct tlc59116_led, work);
++
++	led_dbg("\nbrighness = %d \n", tlc59116->brightness);
++	switch (tlc59116->brightness) {
++	case LED_OFF:
++		led_info("\nLed off\n");
++		tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_LED_OFF);
++		break;
++
++	case LED_FULL:
++		led_info("\nLed on\n");
++		tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_LED_ON);
++		break;
++	default:
++		led_info("\nBrightness is %d\n", tlc59116->brightness);
++		if (TLC59116_BLINK != tlc59116_get_gpio(tlc59116->client, tlc59116->led_num))
++			tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_DIM);
++
++		tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
++		break;
++	}
++
++}
++
++static void tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value)
++{
++	struct tlc59116_led *tlc59116;
++
++	tlc59116 = container_of(led_cdev, struct tlc59116_led, led_cdev);
++
++	spin_lock(&tlc59116->lock);
++	tlc59116->brightness = value;
++
++	/*
++	 * Must use workqueue for the actual I/O since I2C operations
++	 * can sleep.
++	 */
++	schedule_work(&tlc59116->work);
++
++	spin_unlock(&tlc59116->lock);
++}
++
++/*
++ * delay_on, delay_off: units are in ms
++ *
++ */
++
++static int tlc59116_set_blink(struct led_classdev *led_cdev,
++				unsigned long *delay_on,
++				unsigned long *delay_off)
++{
++	struct tlc59116_led *tlc59116;
++	uint16_t	period;
++	uint16_t	duty_cycle;
++	uint8_t		gdc;
++	uint8_t		gfrq;
++	
++	tlc59116 = container_of(led_cdev, struct tlc59116_led, led_cdev);
++	led_info ("Blinking: delay_on = %ldms, delay_off = %ldms, brightness = %d\n", 
++				*delay_on, *delay_off, tlc59116->brightness);
++
++	// Hardware blinking only for tricolor leds . The rest will have software blinking
++	if (tlc59116->led_num > 2) 
++		return 1;
++
++	if ((*delay_on == 0) && (*delay_off ==0)) {
++		spin_lock(&tlc59116->lock);
++
++		/* MODE2[DMBLNK] = 1 */
++		tlc59116_set_mode(tlc59116->client, MODE2_BLINK);
++
++		/* Set LDRx = 11 */
++		tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_BLINK);
++
++		tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
++		spin_unlock(&tlc59116->lock);
++		return 0;
++	}
++
++
++	if ((*delay_on + *delay_off) > TLC59116_PERIOD_MAX)
++	{
++		led_dbg ("Max period is %dms\n", TLC59116_PERIOD_MAX);
++		return -EINVAL;
++	}
++
++	if ((*delay_on + *delay_off) < TLC59116_PERIOD_MIN)
++	{
++		*delay_on = TLC59116_PERIOD_MIN/2 + 1;
++		*delay_off = TLC59116_PERIOD_MIN/2 + 1;
++	}
++	period = (*delay_on) + (*delay_off);
++
++	duty_cycle = (100 * (*delay_on)) / period;
++
++	spin_lock(&tlc59116->lock);
++	
++	/* MODE2[DMBLNK] = 1 */
++	tlc59116_set_mode(tlc59116->client, MODE2_BLINK);
++
++	/* Set LDRx = 11 */
++	tlc59116_set_gpio(tlc59116->client, tlc59116->led_num, TLC59116_BLINK);
++
++	tlc59116_individual_brighness_control(tlc59116->client, tlc59116->led_num, tlc59116->brightness);
++
++	gdc = (duty_cycle * 256)/100;
++	i2c_smbus_write_byte_data(tlc59116->client, TLC59116_REG_GRPPWM, gdc);	
++
++	gfrq = (24 * period)/1000 - 1; /* unit is in second (convert from ms to second) */
++	i2c_smbus_write_byte_data(tlc59116->client, TLC59116_REG_GRPFREQ, gfrq);		
++	
++
++#ifdef DUMP_REGS
++	dump_regs(tlc59116->client);
++#endif
++
++	spin_unlock(&tlc59116->lock);
++	return 0;
++}
++
++static int tlc59116_probe(struct i2c_client *client,
++					const struct i2c_device_id *id)
++{
++	struct tlc59116_led *tlc59116;
++	struct tlc59116_chipdef *chip;
++	struct i2c_adapter *adapter;
++	struct led_platform_data *pdata;
++	int i, err;
++
++	chip = &tlc59116_chipdefs[id->driver_data];
++	adapter = to_i2c_adapter(client->dev.parent);
++	pdata = client->dev.platform_data;
++
++	/* Make sure the slave address / chip type combo given is possible */
++	if ((client->addr & ~((1 << chip->slv_addr_shift) - 1)) !=
++	    chip->slv_addr) {
++		dev_err(&client->dev, "invalid slave address %02x\n",
++				client->addr);
++		return -ENODEV;
++	}
++
++	printk(KERN_INFO "leds-tlc59116: Using %s %d-bit LED driver at "
++			"slave address 0x%02x\n",
++			id->name, chip->bits, client->addr);
++
++	if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
++		return -EIO;
++
++	if (pdata) {
++		if (pdata->num_leds != chip->bits) {
++			dev_err(&client->dev, "board info claims %d LEDs"
++					" on a %d-bit chip\n",
++					pdata->num_leds, chip->bits);
++			return -ENODEV;
++		}
++	}
++
++	tlc59116 = devm_kzalloc(&client->dev, sizeof(*tlc59116) * chip->bits, GFP_KERNEL);
++	if (!tlc59116)
++		return -ENOMEM;
++
++	i2c_set_clientdata(client, tlc59116);
++
++	for (i = 0; i < chip->bits; i++) {
++		tlc59116[i].chipdef = chip;
++		tlc59116[i].client = client;
++		tlc59116[i].led_num = i;
++
++		/* Platform data can specify LED names and default triggers */
++		if (pdata) {
++			if (pdata->leds[i].name)
++				snprintf(tlc59116[i].name,
++					 sizeof(tlc59116[i].name), "tlc59116:%s",
++					 pdata->leds[i].name);
++			if (pdata->leds[i].default_trigger)
++				tlc59116[i].led_cdev.default_trigger =
++					pdata->leds[i].default_trigger;
++		} else {
++			snprintf(tlc59116[i].name, sizeof(tlc59116[i].name),
++				 "tlc59116:%d", i);
++		}
++
++		spin_lock_init(&tlc59116[i].lock);
++
++		tlc59116[i].led_cdev.name = tlc59116[i].name;
++		tlc59116[i].led_cdev.brightness_set = tlc59116_led_set;
++	        tlc59116[i].led_cdev.blink_set = tlc59116_set_blink;	
++		tlc59116[i].led_cdev.brightness = 0;
++
++		INIT_WORK(&tlc59116[i].work, tlc59116_led_work);
++
++		err = led_classdev_register(&client->dev, &tlc59116[i].led_cdev);
++		if (err < 0)
++			goto exit;
++	}
++		
++        tlc59116_set_mode(client, MODE2_DIM);
++
++	/* Turn off LEDs */
++	for (i = 0; i < chip->bits; i++)
++		tlc59116_set_gpio(client, i, TLC59116_LED_OFF);
++
++	return 0;
++
++exit:
++	while (i--) {
++		led_classdev_unregister(&tlc59116[i].led_cdev);
++		cancel_work_sync(&tlc59116[i].work);
++	}
++
++	devm_kfree(&client->dev, tlc59116);
++	i2c_set_clientdata(client, NULL);
++
++	return err;
++}
++
++static int tlc59116_remove(struct i2c_client *client)
++{
++	struct tlc59116_led *tlc59116 = i2c_get_clientdata(client);
++	int i;
++
++	for (i = 0; i < tlc59116->chipdef->bits; i++) {
++		led_classdev_unregister(&tlc59116[i].led_cdev);
++		cancel_work_sync(&tlc59116[i].work);
++	}
++
++	devm_kfree(&client->dev, tlc59116);
++	i2c_set_clientdata(client, NULL);
++
++	return 0;
++}
++
++static struct i2c_driver tlc59116_driver = {
++	.driver = {
++		.name	= "leds-tlc59116",
++		.owner	= THIS_MODULE,
++	},
++	.probe	= tlc59116_probe,
++	.remove	= tlc59116_remove,
++	.id_table = tlc59116_id,
++};
++
++module_i2c_driver(tlc59116_driver);
++
++MODULE_AUTHOR("Belkin Inc.");
++MODULE_DESCRIPTION("TLC59116 LED driver");
++MODULE_LICENSE("GPL v2");
diff --git a/target/linux/mvebu/patches-3.18/100-find_active_root.patch b/target/linux/mvebu/patches-3.18/100-find_active_root.patch
new file mode 100644
index 0000000000..68826fc4e1
--- /dev/null
+++ b/target/linux/mvebu/patches-3.18/100-find_active_root.patch
@@ -0,0 +1,153 @@
+The WRT1900AC among other Linksys routers uses a dual-firmware layout.
+The bootloader passes the active rootfs in bootargs and also sets the
+rootfstype to jffs2 - which is clearly something we don't want.
+
+Rename both root= and rootfstype= variables to avoid issues and also
+use the former to dynamically rename the active partition to "ubi".
+
+
+Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
+
+--- a/arch/arm/boot/compressed/atags_to_fdt.c
++++ b/arch/arm/boot/compressed/atags_to_fdt.c
+@@ -66,6 +66,18 @@ static uint32_t get_cell_size(const void
+ 	return cell_size;
+ }
+ 
++static void mangle_bootargs(void *fdt, const char *fdt_cmdline)
++{
++	char *rootdev;
++	char *rootfs;
++
++	rootdev = strstr(fdt_cmdline, "root=/dev/mtdblock");
++	strncpy(rootdev, "uboot_active_root=", 18);
++
++	rootfs = strstr(fdt_cmdline, "rootfstype");
++	strncpy(rootfs, "origfstype", 10);
++}
++
+ static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
+ {
+ 	char cmdline[COMMAND_LINE_SIZE];
+@@ -135,6 +147,9 @@ int atags_to_fdt(void *atag_list, void *
+ 
+ 	for_each_tag(atag, atag_list) {
+ 		if (atag->hdr.tag == ATAG_CMDLINE) {
++			/* Rename the original root= and rootfstype= options */
++			mangle_bootargs(fdt,
++					   atag->u.cmdline.cmdline);
+ 			/* Append the ATAGS command line to the device tree
+ 			 * command line.
+ 			 * NB: This means that if the same parameter is set in
+--- a/arch/arm/boot/compressed/string.c
++++ b/arch/arm/boot/compressed/string.c
+@@ -111,6 +111,53 @@ char *strchr(const char *s, int c)
+ 	return (char *)s;
+ }
+ 
++/**
++ * strncpy - Copy a length-limited, %NUL-terminated string
++ * @dest: Where to copy the string to
++ * @src: Where to copy the string from
++ * @count: The maximum number of bytes to copy
++ *
++ * The result is not %NUL-terminated if the source exceeds
++ * @count bytes.
++ *
++ * In the case where the length of @src is less than  that  of
++ * count, the remainder of @dest will be padded with %NUL.
++ *
++ */
++char *strncpy(char *dest, const char *src, size_t count)
++{
++	char *tmp = dest;
++
++	while (count) {
++		if ((*tmp = *src) != 0)
++			src++;
++		tmp++;
++		count--;
++	}
++	return dest;
++}
++
++/**
++ * strstr - Find the first substring in a %NUL terminated string
++ * @s1: The string to be searched
++ * @s2: The string to search for
++ */
++char *strstr(const char *s1, const char *s2)
++{
++	size_t l1, l2;
++
++	l2 = strlen(s2);
++	if (!l2)
++		return (char *)s1;
++	l1 = strlen(s1);
++	while (l1 >= l2) {
++		l1--;
++		if (!memcmp(s1, s2, l2))
++			return (char *)s1;
++		s1++;
++	}
++	return NULL;
++}
+ #undef memset
+ 
+ void *memset(void *s, int c, size_t count)
+--- a/drivers/mtd/ofpart.c
++++ b/drivers/mtd/ofpart.c
+@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d
+ 	return of_get_property(pp, "compatible", NULL);
+ }
+ 
++static int uboot_active_root;
++
+ static int parse_ofpart_partitions(struct mtd_info *master,
+ 				   struct mtd_partition **pparts,
+ 				   struct mtd_part_parser_data *data)
+ {
+ 	struct device_node *node;
+ 	const char *partname;
++	const char *owrtpart = "ubi";
+ 	struct device_node *pp;
+ 	int nr_parts, i;
+ 
+@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc
+ 		(*pparts)[i].offset = of_read_number(reg, a_cells);
+ 		(*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
+ 
+-		partname = of_get_property(pp, "label", &len);
+-		if (!partname)
+-			partname = of_get_property(pp, "name", &len);
++		if (uboot_active_root && (i == uboot_active_root)) {
++				partname = owrtpart;
++		} else {
++			partname = of_get_property(pp, "label", &len);
++
++			if (!partname)
++				partname = of_get_property(pp, "name", &len);
++		}
++
+ 		(*pparts)[i].name = partname;
+ 
+ 		if (of_get_property(pp, "read-only", &len))
+@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi
+ 	return 0;
+ }
+ 
++static int __init active_root(char *str)
++{
++	get_option(&str, &uboot_active_root);
++
++	if (!uboot_active_root)
++		return 1;
++
++	return 1;
++}
++
++__setup("uboot_active_root=", active_root);
++
+ static void __exit ofpart_parser_exit(void)
+ {
+ 	deregister_mtd_parser(&ofpart_parser);