diff options
| author | Felix Fietkau <nbd@openwrt.org> | 2014-09-07 09:45:32 +0000 |
|---|---|---|
| committer | Felix Fietkau <nbd@openwrt.org> | 2014-09-07 09:45:32 +0000 |
| commit | 85666bdac6052b0ffbc433f1925f2e26173c7381 (patch) | |
| tree | b262fad5d774d4b87b0efab551802fe116c4653c /target | |
| parent | f2635636182d65671fe30079b6b9ea673b1c74a4 (diff) | |
| download | upstream-85666bdac6052b0ffbc433f1925f2e26173c7381.tar.gz upstream-85666bdac6052b0ffbc433f1925f2e26173c7381.tar.bz2 upstream-85666bdac6052b0ffbc433f1925f2e26173c7381.zip | |
ath79: dev-eth: Don't advertise 1gbit in link code word on ar9331
While the AR9331 has a gigabit MAC towards the internal switch, the
integrated PHYs however are only 100-base-tx capable. The existing code
however advertieses gigabit capability in the link status word. If you
attach such a PHY to a gigabit capable switch on the remote end, with
some probability it attempts to negotiate gigabit and fails, falling
baco to the AR9331 assuming a 10mbit half-duplex link. This has been
observed quite frequently with the Carambola2 and gigabit capable
switches.
In ath79_register_eth(), "pdata->has_gbit = 1;" is set unconditionally
for both AR9331 ethernet ports. This is most likely wrong. Despite the
two MAC IP cores being gigabit MACs, the MAC for eth1 is connected to a
100base-T PHY via MII. The has_gbit attribute is used in the ethernet
driver to determine the supported link modes.
So either pdata->has_gbit is not set to 1 anymore, or the ethernet
driver needs to be modified to determine the advertised link code word
on another criteria than pdata->has_gbit. This patch implements the
former solution.
Signed-off-by: Harald Welte <laforge@gnumonks.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42432 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
| -rw-r--r-- | target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c index 227f16e4c2..f106e22731 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c @@ -940,13 +940,13 @@ void __init ath79_register_eth(unsigned int id) pdata->set_speed = ath79_set_speed_dummy; pdata->speed = SPEED_1000; + pdata->has_gbit = 1; pdata->duplex = DUPLEX_FULL; pdata->switch_data = &ath79_switch_data; ath79_switch_data.phy_poll_mask |= BIT(4); } - pdata->has_gbit = 1; pdata->is_ar724x = 1; if (!pdata->fifo_cfg1) |