aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorINAGAKI Hiroshi <musashino.open@gmail.com>2019-01-09 00:20:18 +0900
committerChristian Lamparter <chunkeey@gmail.com>2019-02-14 16:56:14 +0100
commitf305ce5c3577005aba5b870b373e65aaf9ede3ec (patch)
tree92801a53052461f74ca6e28bcf2d40c68fb1022a /target
parentdee8db441e480e7d581447f43219596f6dd9542a (diff)
downloadupstream-f305ce5c3577005aba5b870b373e65aaf9ede3ec.tar.gz
upstream-f305ce5c3577005aba5b870b373e65aaf9ede3ec.tar.bz2
upstream-f305ce5c3577005aba5b870b373e65aaf9ede3ec.zip
ramips: add support for I-O DATA WN-AC1167GR
I-O DATA WN-AC1167GR is a 2.4/5 GHz band 11ac router, based on MediaTek MT7620A. Specification: - SoC : MediaTek MT7620A - RAM : DDR2 64 MB - Flash : SPI-NOR 8MB - WLAN : 2.4/5 GHz, 2T2R - 2.4 GHz: MT7620A (SoC) - 5 GHz : MT7612E - Ethernet: 10/100/1000 Mbps (ext. MT7530) - LED/key : 4x/3x (2x buttons, 1x slide-switch) - UART : through-hole on PCB - J2: TX, GND, RX, Vcc from SoC side - 115200n8 Flash instruction using factory image: 1. Boot WN-AC1167GR normaly 2. Access to "http://192.168.0.1/" and open firmware update page ("ファームウェア") 3. Select the OpenWrt factory image and click update ("更新") button to perform firmware update 4. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds4
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network7
-rw-r--r--target/linux/ramips/dts/WN-AC1167GR.dts216
-rw-r--r--target/linux/ramips/image/mt7620.mk31
4 files changed, 258 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index e36f125126..4e2d534c99 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -188,6 +188,10 @@ ht-tm02)
ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:lan" "eth0"
set_wifi_led "$boardname:blue:wlan"
;;
+iodata,wn-ac1167gr)
+ ucidef_set_led_wlan "wlan5g" "WLAN5G" "$boardname:green:wlan5g" "phy0radio"
+ ucidef_set_led_wlan "wlan2g" "WLAN2G" "$boardname:green:wlan2g" "phy1radio"
+ ;;
kimax,u35wf)
set_wifi_led "$boardname:blue:wifi"
ucidef_set_led_netdev "eth" "ETH" "$boardname:green:eth" "eth0"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 67f2b4998a..d84e738e89 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -319,6 +319,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "5:lan" "0:wan" "6@eth0"
;;
+ iodata,wn-ac1167gr)
+ ucidef_add_switch "switch1" \
+ "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "0:wan" "6@eth0"
+ ;;
kn_rf)
ucidef_add_switch "switch0" \
"0:wan" "1:lan" "2:lan" "3:lan" "4:lan" "6@eth0"
@@ -525,6 +529,9 @@ ramips_setup_macs()
[ -n "$lan_mac" ] || lan_mac=$(cat /sys/class/net/eth0/address)
wan_mac=$(macaddr_add "$lan_mac" 1)
;;
+ iodata,wn-ac1167gr)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" -1)
+ ;;
iodata,wn-ax1167gr|\
iodata,wn-gx300gr)
wan_mac=$(macaddr_add "$(mtd_get_mac_binary Factory 4)" 1)
diff --git a/target/linux/ramips/dts/WN-AC1167GR.dts b/target/linux/ramips/dts/WN-AC1167GR.dts
new file mode 100644
index 0000000000..14c851a3a8
--- /dev/null
+++ b/target/linux/ramips/dts/WN-AC1167GR.dts
@@ -0,0 +1,216 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7620a.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "iodata,wn-ac1167gr", "ralink,mt7620a-soc";
+ model = "I-O DATA WN-AC1167GR";
+
+ aliases {
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power: power {
+ label = "wn-ac1167gr:green:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "wn-ac1167gr:green:wlan2g";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ notification {
+ label = "wn-ac1167gr:green:notification";
+ gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan5g {
+ label = "wn-ac1167gr:green:wlan5g";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ auto {
+ label = "auto";
+ gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ linux,input-type = <EV_SW>;
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ Factory: partition@40000 {
+ label = "Factory";
+ reg = <0x40000 0x8000>;
+ read-only;
+ };
+
+ iNIC_rf: partition@48000 {
+ label = "iNIC_rf";
+ reg = <0x48000 0x8000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "NoUsed";
+ reg = <0x50000 0x20000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x70000 0x6b4000>;
+ };
+
+ partition@724000 {
+ label = "manufacture";
+ reg = <0x724000 0x8c000>;
+ read-only;
+ };
+
+ partition@7b0000 {
+ label = "backup";
+ reg = <0x7b0000 0x10000>;
+ read-only;
+ };
+
+ partition@7c0000 {
+ label = "storage";
+ reg = <0x7c0000 0x40000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&ethernet {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rgmii1_pins &mdio_pins>;
+ mtd-mac-address = <&Factory 0x4>;
+
+ port@5 {
+ status = "okay";
+ mediatek,fixed-link = <1000 1 1 1>;
+ phy-mode = "rgmii";
+ };
+
+ mdio-bus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ ethernet-phy@0 {
+ reg = <0>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@1 {
+ reg = <1>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@2 {
+ reg = <2>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@3 {
+ reg = <3>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@4 {
+ reg = <4>;
+ phy-mode = "rgmii";
+ };
+
+ ethernet-phy@1f {
+ reg = <0x1f>;
+ phy-mode = "rgmii";
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&iNIC_rf 0x0>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&wmac {
+ ralink,mtd-eeprom = <&Factory 0x0>;
+};
diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk
index 57903232ed..7ac228db16 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -16,6 +16,25 @@ define Build/elecom-header
-f $@ -C $(KDIR) v_0.0.0.bin v_0.0.0.md5
endef
+define Build/elx-header
+ $(eval hw_id=$(word 1,$(1)))
+ $(eval xor_pattern=$(word 2,$(1)))
+ ( \
+ echo -ne "\x00\x00\x00\x00\x00\x00\x00\x03" | \
+ dd bs=42 count=1 conv=sync; \
+ hw_id="$(hw_id)"; \
+ echo -ne "\x$${hw_id:0:2}\x$${hw_id:2:2}\x$${hw_id:4:2}\x$${hw_id:6:2}" | \
+ dd bs=20 count=1 conv=sync; \
+ echo -ne "$$(printf '%08x' $$(stat -c%s $@) | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
+ dd bs=8 count=1 conv=sync; \
+ echo -ne "$$($(STAGING_DIR_HOST)/bin/mkhash md5 $@ | fold -s2 | xargs -I {} echo \\x{} | tr -d '\n')" | \
+ dd bs=58 count=1 conv=sync; \
+ ) > $(KDIR)/tmp/$(DEVICE_NAME).header
+ $(call Build/xor-image,-p $(xor_pattern) -x)
+ cat $(KDIR)/tmp/$(DEVICE_NAME).header $@ > $@.new
+ mv $@.new $@
+endef
+
define Device/ai-br100
DTS := AI-BR100
IMAGE_SIZE := 7936k
@@ -327,6 +346,18 @@ define Device/hc5861
endef
TARGET_DEVICES += hc5861
+define Device/iodata_wn-ac1167gr
+ DTS := WN-AC1167GR
+ DEVICE_TITLE := I-O DATA WN-AC1167GR
+ IMAGE_SIZE := 6864k
+ IMAGES += factory.bin
+ IMAGE/factory.bin := \
+ $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | \
+ elx-header 01040016 8844A2D168B45A2D
+ DEVICE_PACKAGES := kmod-mt76x2
+endef
+TARGET_DEVICES += iodata_wn-ac1167gr
+
define Device/kimax_u35wf
DTS := U35WF
IMAGE_SIZE := 16064k