aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2016-10-08 01:17:04 +0200
committerJohn Crispin <john@phrozen.org>2016-11-21 10:05:40 +0100
commiteb9ba2b91e0f0c2d0b072b3fea3ea2a8b50af5fc (patch)
tree9b881025fb7f4d892f7959a1a080ca16f7565c84 /target
parent9ee8257cc7ed45cde07558a3b9e5310d16ad078d (diff)
downloadupstream-eb9ba2b91e0f0c2d0b072b3fea3ea2a8b50af5fc.tar.gz
upstream-eb9ba2b91e0f0c2d0b072b3fea3ea2a8b50af5fc.tar.bz2
upstream-eb9ba2b91e0f0c2d0b072b3fea3ea2a8b50af5fc.zip
ar71xx: add support for YunCore CPE870
YunCore CPE870 is an outdoor CPE/AP based on Atheros AR9341. Short specification: - 535/400/200 MHz (CPU/DDR/AHB) - 2x 10/100 Mbps Ethernet, passive PoE support - 64/128 MB of RAM (DDR2) - 8 MB of FLASH - 2T2R 2.4 GHz with external PA (SKY65174-21), up to 30 dBm - internal 14 dBi panel antenna - 8x LED, 1x button - UART (JP1) header on PCB Flash instruction (do it under U-Boot, using UART): 1. tftp 0x80060000 lede-ar71xx-generic-cpe870-squashfs-sysupgrade.bin 2. erase 0x9f020000 +$filesize 3. cp.b $fileaddr 0x9f020000 $filesize 4. setenv bootcmd "bootm 0x9f020000" 5. saveenv && reset Vendor firmware access (login/password): Admin/5up Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds9
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.41
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt9
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c152
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/image/generic.mk10
10 files changed, 188 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index c348b4fbda..2cf72d61d3 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -58,6 +58,7 @@ ap147-010)
ucidef_set_led_wlan "wlan2g" "WLAN 2.4 GHz" "ap147:green:wlan-2g" "phy0tpt"
;;
ap90q|\
+cpe870|\
dr531)
ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth1"
@@ -66,6 +67,14 @@ dr531)
ap90q)
ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
;;
+ cpe870)
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:link1" "wlan0" "1" "100" "0" "13"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:green:link2" "wlan0" "26" "100" "-25" "13"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:green:link3" "wlan0" "51" "100" "-50" "13"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:link4" "wlan0" "76" "100" "-75" "13"
+ ;;
esac
;;
bhr-4grv2)
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 0ef5a52a05..e619749609 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -48,6 +48,7 @@ get_status_led() {
status_led="$board:green:power"
;;
ap90q|\
+ cpe870|\
gl-inet)
status_led="$board:green:lan"
;;
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 16ee2eb578..0d4c1e0a49 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -526,6 +526,9 @@ ar71xx_board_detect() {
name="cpe510"
tplink_pharos_board_detect
;;
+ *CPE870)
+ name="cpe870"
+ ;;
*CR3000)
name="cr3000"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 697b786937..66f630884f 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -188,6 +188,7 @@ platform_check_image() {
cf-e380ac-v2|\
cf-e520n|\
cf-e530n|\
+ cpe870|\
dgl-5500-a1|\
dhp-1565-a1|\
dir-505-a1|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 471a44d056..794e7f809c 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -69,6 +69,7 @@ CONFIG_ATH79_MACH_CF_E380AC_V2=y
CONFIG_ATH79_MACH_CF_E520N=y
CONFIG_ATH79_MACH_CF_E530N=y
CONFIG_ATH79_MACH_CPE510=y
+CONFIG_ATH79_MACH_CPE870=y
CONFIG_ATH79_MACH_CR3000=y
CONFIG_ATH79_MACH_CR5000=y
CONFIG_ATH79_MACH_DAP_2695_A1=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index e9431f139e..6daa093a01 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1211,6 +1211,15 @@ config ATH79_MACH_CPE510
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_CPE870
+ bool "YunCore CPE870 support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_TL_MR11U
bool "TP-LINK TL-MR11U/TL-MR3040 support"
select SOC_AR933X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index c0caccdb23..b718d6bfd3 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -75,6 +75,7 @@ obj-$(CONFIG_ATH79_MACH_CF_E380AC_V2) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E520N) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CF_E530N) += mach-cf-e316n-v2.o
obj-$(CONFIG_ATH79_MACH_CPE510) += mach-cpe510.o
+obj-$(CONFIG_ATH79_MACH_CPE870) += mach-cpe870.o
obj-$(CONFIG_ATH79_MACH_CR3000) += mach-cr3000.o
obj-$(CONFIG_ATH79_MACH_CR5000) += mach-cr5000.o
obj-$(CONFIG_ATH79_MACH_DAP_2695_A1) += mach-dap-2695-a1.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c
new file mode 100644
index 0000000000..284cdc71c2
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe870.c
@@ -0,0 +1,152 @@
+/*
+ * YunCore CPE870 board support
+ *
+ * Copyright (C) 2016 Piotr Dymacz <pepe2k@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+#define CPE870_GPIO_LED_LINK1 0
+#define CPE870_GPIO_LED_LINK2 1
+#define CPE870_GPIO_LED_LINK3 2
+#define CPE870_GPIO_LED_LINK4 3
+#define CPE870_GPIO_LED_WLAN 13
+#define CPE870_GPIO_LED_WAN 19
+#define CPE870_GPIO_LED_LAN 20
+
+#define CPE870_GPIO_BTN_RESET 16
+
+#define CPE870_KEYS_POLL_INTERVAL 20
+#define CPE870_KEYS_DEBOUNCE_INTERVAL (3 * CPE870_KEYS_POLL_INTERVAL)
+
+static struct gpio_led cpe870_leds_gpio[] __initdata = {
+ {
+ .name = "cpe870:green:lan",
+ .gpio = CPE870_GPIO_LED_LAN,
+ .active_low = 1,
+ },
+ {
+ .name = "cpe870:green:wan",
+ .gpio = CPE870_GPIO_LED_WAN,
+ .active_low = 1,
+ },
+ {
+ .name = "cpe870:green:wlan",
+ .gpio = CPE870_GPIO_LED_WLAN,
+ .active_low = 1,
+ },
+ {
+ .name = "cpe870:green:link1",
+ .gpio = CPE870_GPIO_LED_LINK1,
+ .active_low = 1,
+ },
+ {
+ .name = "cpe870:green:link2",
+ .gpio = CPE870_GPIO_LED_LINK2,
+ .active_low = 1,
+ },
+ {
+ .name = "cpe870:green:link3",
+ .gpio = CPE870_GPIO_LED_LINK3,
+ .active_low = 1,
+ },
+ {
+ .name = "cpe870:green:link4",
+ .gpio = CPE870_GPIO_LED_LINK4,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button cpe870_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = CPE870_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = CPE870_GPIO_BTN_RESET,
+ .active_low = 1,
+ },
+};
+
+static void __init cpe870_gpio_setup(void)
+{
+ /* Disable JTAG (enables GPIO0-3) */
+ ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
+
+ ath79_gpio_direction_select(CPE870_GPIO_LED_LINK1, true);
+ ath79_gpio_direction_select(CPE870_GPIO_LED_LINK2, true);
+ ath79_gpio_direction_select(CPE870_GPIO_LED_LINK3, true);
+ ath79_gpio_direction_select(CPE870_GPIO_LED_LINK4, true);
+
+ /* Mute LEDs on boot */
+ gpio_set_value(CPE870_GPIO_LED_LAN, 1);
+ gpio_set_value(CPE870_GPIO_LED_WAN, 1);
+ gpio_set_value(CPE870_GPIO_LED_LINK1, 1);
+ gpio_set_value(CPE870_GPIO_LED_LINK2, 1);
+ gpio_set_value(CPE870_GPIO_LED_LINK3, 1);
+ gpio_set_value(CPE870_GPIO_LED_LINK4, 1);
+
+ ath79_gpio_output_select(CPE870_GPIO_LED_LINK1, 0);
+ ath79_gpio_output_select(CPE870_GPIO_LED_LINK2, 0);
+ ath79_gpio_output_select(CPE870_GPIO_LED_LINK3, 0);
+ ath79_gpio_output_select(CPE870_GPIO_LED_LINK4, 0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(cpe870_leds_gpio),
+ cpe870_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, CPE870_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(cpe870_gpio_keys),
+ cpe870_gpio_keys);
+}
+
+static void __init cpe870_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff1000);
+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+ ath79_register_m25p80(NULL);
+
+ cpe870_gpio_setup();
+
+ ath79_register_mdio(1, 0x0);
+
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(4);
+
+ /* LAN */
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
+ ath79_register_eth(1);
+
+ /* WAN */
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_register_eth(0);
+
+ ath79_register_wmac(art, NULL);
+}
+
+MIPS_MACHINE(ATH79_MACH_CPE870, "CPE870", "YunCore CPE870", cpe870_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index e69cf3bece..50ecff46f5 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -61,6 +61,7 @@ enum ath79_mach_type {
ATH79_MACH_CF_E530N, /* COMFAST CF-E530N */
ATH79_MACH_CPE210, /* TP-LINK CPE210 */
ATH79_MACH_CPE510, /* TP-LINK CPE510 */
+ ATH79_MACH_CPE870, /* YunCore CPE870 */
ATH79_MACH_CR3000, /* PowerCloud CR3000 */
ATH79_MACH_CR5000, /* PowerCloud CR5000 */
ATH79_MACH_DAP_2695_A1, /* D-Link DAP-2695 rev. A1 */
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index 0c32cddfdd..0b8a216a25 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -80,6 +80,16 @@ define Device/cf-e530n
endef
TARGET_DEVICES += cf-e530n
+define Device/cpe870
+ DEVICE_TITLE := YunCore CPE870
+ DEVICE_PACKAGES := rssileds
+ BOARDNAME = CPE870
+ IMAGE_SIZE = 7936k
+ CONSOLE = ttyS0,115200
+ MTDPARTS = spi0.0:64k(u-boot)ro,64k(u-boot-env),7936k(firmware),64k(config)ro,64k(art)ro
+endef
+TARGET_DEVICES += cpe870
+
define Device/domywifi-dw33d
DEVICE_TITLE := DomyWifi DW33D
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-storage kmod-ledtrig-usbdev kmod-ath10k