aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorJohn Crispin <john@openwrt.org>2015-11-22 11:48:57 +0000
committerJohn Crispin <john@openwrt.org>2015-11-22 11:48:57 +0000
commit95aa28da81cb6bbd13c70c41460c2d24faf24990 (patch)
tree237f564ef5c99077de01543a70b8f42b230b6cee /target
parenta58dec627598ecae1767321a752c0a88c04fdce7 (diff)
downloadupstream-95aa28da81cb6bbd13c70c41460c2d24faf24990.tar.gz
upstream-95aa28da81cb6bbd13c70c41460c2d24faf24990.tar.bz2
upstream-95aa28da81cb6bbd13c70c41460c2d24faf24990.zip
ramips: move rt2880 spi clock and reset init code to spi_prepare_message
before spi transfer. use spi_prepare_message to setup spi hardware. it will setup MSB, spi mode and speed remove sys_freq member and speed check code Signed-off-by: Michael Lee <igvtee@gmail.com> SVN-Revision: 47578
Diffstat (limited to 'target')
-rw-r--r--target/linux/ramips/patches-3.18/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch130
1 files changed, 62 insertions, 68 deletions
diff --git a/target/linux/ramips/patches-3.18/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-3.18/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch
index 418a094161..862e24c368 100644
--- a/target/linux/ramips/patches-3.18/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch
+++ b/target/linux/ramips/patches-3.18/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch
@@ -41,7 +41,7 @@ Acked-by: John Crispin <blogic@openwrt.org>
spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
--- /dev/null
+++ b/drivers/spi/spi-rt2880.c
-@@ -0,0 +1,539 @@
+@@ -0,0 +1,533 @@
+/*
+ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
+ *
@@ -172,8 +172,7 @@ Acked-by: John Crispin <blogic@openwrt.org>
+struct rt2880_spi {
+ struct spi_master *master;
+ void __iomem *base;
-+ unsigned int sys_freq;
-+ unsigned int speed;
++ u32 speed;
+ u16 wait_loops;
+ u16 mode;
+ struct clk *clk;
@@ -209,61 +208,33 @@ Acked-by: John Crispin <blogic@openwrt.org>
+ iowrite32((ioread32(addr) & ~mask), addr);
+}
+
-+static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
++static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed)
+{
+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
+ u32 rate;
+ u32 prescale;
-+ u32 reg;
-+
-+ dev_dbg(&spi->dev, "speed:%u\n", speed);
+
+ /*
+ * the supported rates are: 2, 4, 8, ... 128
+ * round up as we look for equal or less speed
+ */
-+ rate = DIV_ROUND_UP(rs->sys_freq, speed);
-+ dev_dbg(&spi->dev, "rate-1:%u\n", rate);
++ rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed);
+ rate = roundup_pow_of_two(rate);
-+ dev_dbg(&spi->dev, "rate-2:%u\n", rate);
+
+ /* Convert the rate to SPI clock divisor value. */
+ prescale = ilog2(rate / 2);
-+ dev_dbg(&spi->dev, "prescale:%u\n", prescale);
-+
-+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
-+ reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale);
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
+
+ /* some tolerance. double and add 100 */
+ rs->wait_loops = (8 * HZ * loops_per_jiffy) /
+ (clk_get_rate(rs->clk) / rate);
+ rs->wait_loops = (rs->wait_loops << 1) + 100;
+ rs->speed = speed;
-+ return 0;
-+}
+
-+/*
-+ * called only when no transfer is active on the bus
-+ */
-+static int
-+rt2880_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
-+{
-+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+ unsigned int speed = spi->max_speed_hz;
-+ int rc;
-+
-+ if ((t != NULL) && t->speed_hz)
-+ speed = t->speed_hz;
++ dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n",
++ clk_get_rate(rs->clk) / rate, speed, rate, prescale,
++ rs->wait_loops);
+
-+ if (rs->speed != speed) {
-+ dev_dbg(&spi->dev, "speed_hz:%u\n", speed);
-+ rc = rt2880_spi_baudrate_set(spi, speed);
-+ if (rc)
-+ return rc;
-+ }
-+
-+ return 0;
++ return prescale;
+}
+
+static u32 get_arbiter_offset(struct spi_master *master)
@@ -345,15 +316,9 @@ Acked-by: John Crispin <blogic@openwrt.org>
+ struct rt2880_spi *rs = spi_master_get_devdata(master);
+ struct spi_device *spi = m->spi;
+ struct spi_transfer *t = NULL;
-+ int par_override = 0;
+ int status = 0;
+ int cs_active = 0;
+
-+ /* Load defaults */
-+ status = rt2880_spi_setup_transfer(spi, NULL);
-+ if (status < 0)
-+ goto msg_done;
-+
+ list_for_each_entry(t, &m->transfers, transfer_list) {
+ if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
+ dev_err(&spi->dev,
@@ -362,23 +327,6 @@ Acked-by: John Crispin <blogic@openwrt.org>
+ goto msg_done;
+ }
+
-+ if (t->speed_hz && t->speed_hz < (rs->sys_freq / 128)) {
-+ dev_err(&spi->dev,
-+ "message rejected: device min speed (%d Hz) exceeds required transfer speed (%d Hz)\n",
-+ (rs->sys_freq / 128), t->speed_hz);
-+ status = -EIO;
-+ goto msg_done;
-+ }
-+
-+ if (par_override || t->speed_hz || t->bits_per_word) {
-+ par_override = 1;
-+ status = rt2880_spi_setup_transfer(spi, t);
-+ if (status < 0)
-+ goto msg_done;
-+ if (!t->speed_hz && !t->bits_per_word)
-+ par_override = 0;
-+ }
-+
+ if (!cs_active) {
+ rt2880_spi_set_cs(rs, 1);
+ cs_active = 1;
@@ -465,12 +413,60 @@ Acked-by: John Crispin <blogic@openwrt.org>
+ return 0;
+}
+
-+static void rt2880_spi_reset(struct rt2880_spi *rs)
++static int rt2880_spi_prepare_message(struct spi_master *master,
++ struct spi_message *msg)
+{
-+ rt2880_spi_write(rs, RAMIPS_SPI_CFG,
-+ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING |
-+ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL);
-+ rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA);
++ struct rt2880_spi *rs = spi_master_get_devdata(master);
++ struct spi_device *spi = msg->spi;
++ u32 reg;
++
++ if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz))
++ return 0;
++
++#if 0
++ /* set spido to tri-state */
++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO);
++#endif
++
++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++
++ reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL |
++ SPICFG_RXCLKEDGE_FALLING |
++ SPICFG_TXCLKEDGE_FALLING |
++ SPICFG_SPICLK_PRESCALE_MASK);
++
++ /* MSB */
++ if (!(spi->mode & SPI_LSB_FIRST))
++ reg |= SPICFG_MSBFIRST;
++
++ /* spi mode */
++ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) {
++ case SPI_MODE_0:
++ reg |= SPICFG_TXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_1:
++ reg |= SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_2:
++ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING;
++ break;
++ case SPI_MODE_3:
++ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING;
++ break;
++ }
++ rs->mode = spi->mode;
++
++#if 0
++ /* set spiclk and spiena to tri-state */
++ reg |= SPICFG_HIZSPI;
++#endif
++
++ /* clock divide */
++ reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz);
++
++ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++
++ return 0;
+}
+
+static int rt2880_spi_probe(struct platform_device *pdev)
@@ -511,6 +507,7 @@ Acked-by: John Crispin <blogic@openwrt.org>
+ master->max_speed_hz = clk_get_rate(clk) / 2;
+ master->flags = SPI_MASTER_HALF_DUPLEX;
+ master->setup = rt2880_spi_setup;
++ master->prepare_message = rt2880_spi_prepare_message;
+ master->transfer_one_message = rt2880_spi_transfer_one_message;
+ master->num_chipselect = RALINK_NUM_CHIPSELECTS;
+
@@ -520,12 +517,9 @@ Acked-by: John Crispin <blogic@openwrt.org>
+ rs->master = master;
+ rs->base = base;
+ rs->clk = clk;
-+ rs->sys_freq = clk_get_rate(rs->clk);
-+ dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq);
+
+ device_reset(&pdev->dev);
+
-+ rt2880_spi_reset(rs);
+
+ ret = devm_spi_register_master(&pdev->dev, master);
+ if (ret < 0) {