aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2018-12-27 02:32:38 +0100
committerChristian Lamparter <chunkeey@gmail.com>2018-12-27 14:06:38 +0100
commit1724d4e9ed7716a5444eca42adf045c2f3afc554 (patch)
tree633979e9b4ba8d4ca6693c06ac8aae889c6d3a49 /target
parent8471944325db80ca37f7c756130070d0add58ff6 (diff)
downloadupstream-1724d4e9ed7716a5444eca42adf045c2f3afc554.tar.gz
upstream-1724d4e9ed7716a5444eca42adf045c2f3afc554.tar.bz2
upstream-1724d4e9ed7716a5444eca42adf045c2f3afc554.zip
ath79: add support for devolo WiFi pro 1200e
Hardware -------- CPU: Qualcomm Atheros QCA9558 RAM: 128M DDR2 FLASH: 16MiB ETH: 1x Atheros AR8035 (PoE in) 1x Atheros AR8033 WiFi2: QCA9558 2T2R WiFi5: QCA9880 2T2R BTN: 1x Reset LED: 1x LED blue 1x LED red BEEP: 1x GPIO attached piezo beeper UART: 3.3V GND TX RX (115200-N-8) (3.3V is square pad) Header is located next to reset-button Installation ------------ Make sure you set a password for the root user as prompted on first setup! 1. Upload OpenWRT sysupgrade image via SSH to the device. Use /tmp as the destination folder on the device. User is root, password the one set in the web interface. 2. Install OpenWRT with > sysupgrade -n -F /tmp/<openwrt-image-name> Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata4
-rw-r--r--target/linux/ath79/dts/qca9558_devolo_dvl1200e.dts47
-rw-r--r--target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi149
-rw-r--r--target/linux/ath79/generic/config-default3
-rw-r--r--target/linux/ath79/image/generic.mk8
6 files changed, 214 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 5e1df97a87..b2c7762bb5 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -58,6 +58,9 @@ ath79_setup_interfaces()
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
;;
+ devolo,dvl1200e)
+ ucidef_set_interface_lan "eth0 eth1"
+ ;;
dlink,dir-825-b1)
ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index da39fd7195..deaac72174 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -87,6 +87,10 @@ board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
+ devolo,dvl1200e)
+ ath10kcal_extract "art" 20480 2116
+ ath10kcal_patch_mac_crc $(macaddr_add $(mtd_get_mac_binary art 0) -1)
+ ;;
glinet,gl-x750)
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1200e.dts b/target/linux/ath79/dts/qca9558_devolo_dvl1200e.dts
new file mode 100644
index 0000000000..3bca23cc57
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_devolo_dvl1200e.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9558_devolo_dvl1xxx.dtsi"
+
+/ {
+ compatible = "devolo,dvl1200e", "qca,qca9557";
+ model = "devolo WiFi pro 1200e";
+
+ aliases {
+ led-boot = &status_blue;
+ led-failsafe = &status_red;
+ led-running = &status_blue;
+ led-upgrade = &status_red;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ status_blue: status_blue {
+ label = "dvl1200e:blue:status";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ status_red: status_red {
+ label = "dvl1200e:red:status";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ beeper {
+ compatible = "gpio-beeper";
+ gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&mdio1 {
+ status = "okay";
+};
+
+&eth1 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi b/target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi
new file mode 100644
index 0000000000..9937186b1e
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_devolo_dvl1xxx.dtsi
@@ -0,0 +1,149 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+/*
+ * The hardware of this board family is most likely shared with other devices
+ * from other manufacturers.
+ * Devolo seems to use hardware from Edimax, namely the Edimax WAP1750.
+ *
+ * The base board is identical but the single models differ in number of
+ * buttons, ethernet ports, external console, USB, external / internal
+ * antennas and number of spatial streams.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9557.dtsi"
+
+/ {
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "Reset button";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ debounce-interval = <60>;
+ };
+ };
+
+ watchdog {
+ compatible = "linux,wdt-gpio";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ hw_algo = "toggle";
+ hw_margin_ms = <300>;
+ always-running;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+ num-cs = <1>;
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ read-only;
+ };
+
+ art: partition@50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ read-only;
+ };
+
+ partition@60000 {
+ label = "art_bak";
+ reg = <0x060000 0x010000>;
+ read-only;
+ };
+
+ partition@70000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x070000 0xf90000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ at803x-disable-smarteee;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x00>;
+ phy-handle = <&phy4>;
+ pll-data = <0xae000000 0x80000101 0x80001313>;
+
+ gmac_config: gmac-config {
+ device = <&gmac>;
+
+ rxdv-delay = <3>;
+ rxd-delay = <3>;
+ txen-delay = <0>;
+ txd-delay = <0>;
+ rgmii-enabled = <1>;
+ };
+};
+
+&mdio1 {
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&eth1 {
+ mtd-mac-address = <&art 0x00>;
+ mtd-mac-address-increment = <1>;
+ phy-handle = <&phy1>;
+ pll-data = <0x03000101 0x00000101 0x00001313>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x00>;
+ mtd-mac-address-increment = <(-2)>;
+};
diff --git a/target/linux/ath79/generic/config-default b/target/linux/ath79/generic/config-default
index b2194a4132..fddcb1d704 100644
--- a/target/linux/ath79/generic/config-default
+++ b/target/linux/ath79/generic/config-default
@@ -1,5 +1,7 @@
CONFIG_AT803X_PHY=y
CONFIG_BLK_MQ_PCI=y
+CONFIG_GPIO_WATCHDOG=y
+CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
CONFIG_INTEL_XWAY_PHY=y
CONFIG_IP17XX_PHY=y
CONFIG_LEDS_RESET=y
@@ -23,3 +25,4 @@ CONFIG_RTL8366RB_PHY=y
CONFIG_RTL8366S_PHY=y
CONFIG_RTL8366_SMI=y
CONFIG_RTL8367_PHY=y
+CONFIG_WATCHDOG_CORE=y
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index badfa7cbab..ef8cf170de 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -138,6 +138,14 @@ define Device/buffalo_wzr-hp-g450h
endef
TARGET_DEVICES += buffalo_wzr-hp-g450h
+define Device/devolo_dvl1200e
+ ATH_SOC := qca9558
+ DEVICE_TITLE := devolo WiFi pro 1200e
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
+ IMAGE_SIZE := 15936k
+endef
+TARGET_DEVICES += devolo_dvl1200e
+
define Device/dlink_dir-825-b1
ATH_SOC := ar7161
DEVICE_TITLE := D-LINK DIR-825 B1