aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorMathias Kresin <dev@kresin.me>2016-12-30 11:53:21 +0100
committerMathias Kresin <dev@kresin.me>2017-06-24 22:36:38 +0200
commite7cd6f5d66b827e31cfa7e7bc019ac1b86aac770 (patch)
tree2266d211229d5045d0ea8d4e998164641272a5b7 /target
parent0605b15be405ddaf9499e02f4b5a59ba406d2ccd (diff)
downloadupstream-e7cd6f5d66b827e31cfa7e7bc019ac1b86aac770.tar.gz
upstream-e7cd6f5d66b827e31cfa7e7bc019ac1b86aac770.tar.bz2
upstream-e7cd6f5d66b827e31cfa7e7bc019ac1b86aac770.zip
ar71xx: add AVM FRITZ!WLAN Repeater 300E support
Specifications: * SoC: AR7242 (Virian 400MHz) * RAM: 64 MB DDR (W9751G6JB-25) * Flash: 16MB SPI flash (S25FL129PIF) * WiFi: AR9382 (2.4/5GHz) + 2x SE2595L * LAN: 1x1000M (PEF7071V) To install LEDE via EVA bootloader, a FTP connection need to be established to 192.168.178.1 within the first seconds after power on: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put lede-ar71xx-generic-fritz300e-squashfs-sysupgrade.bin mtd1 Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds10
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rw-r--r--target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom21
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.43
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt9
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c132
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/image/generic.mk13
-rw-r--r--target/linux/ar71xx/mikrotik/config-default3
-rw-r--r--target/linux/ar71xx/nand/config-default3
14 files changed, 205 insertions, 0 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 87f99ea9d8..d80efefc34 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -242,6 +242,16 @@ ens202ext)
f9k1115v2)
ucidef_set_led_usbdev "usb2" "USB2" "belkin:green:usb2" "1-1"
;;
+fritz300e)
+ ucidef_set_led_netdev "lan" "LAN" "$board:green:lan" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+ ucidef_set_rssimon "wlan0" "200000" "1"
+ ucidef_set_led_rssi "rssilow" "RSSILOW" "$board:green:rssi0" "wlan0" "1" "100"
+ ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$board:green:rssi1" "wlan0" "20" "100"
+ ucidef_set_led_rssi "rssimedium" "RSSIMEDIUM" "$board:green:rssi2" "wlan0" "40" "100"
+ ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$board:green:rssi3" "wlan0" "60" "100"
+ ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$board:green:rssi4" "wlan0" "80" "100"
+ ;;
rb-750)
ucidef_set_led_default "act" "act" "rb750:green:act" "1"
ucidef_set_led_netdev "port1" "port1" "rb750:green:port1" "eth1"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 80355d6160..9ff6dddd32 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -75,6 +75,7 @@ ar71xx_setup_interfaces()
eap300v2|\
eap7660d|\
el-mini|\
+ fritz300e|\
hiveap-121|\
loco-m-xw|\
mr12|\
@@ -518,6 +519,9 @@ ar71xx_setup_macs()
lan_mac=$(mtd_get_mac_binary caldata 0)
wan_mac=$(mtd_get_mac_binary caldata 6)
;;
+ fritz300e)
+ lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
+ ;;
tl-wr1043nd-v4)
wan_mac=$(mtd_get_mac_binary config 0x1017c)
;;
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index dce5d8e3cf..936a1148d0 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -54,6 +54,7 @@ get_status_led() {
archer-c25-v1|\
archer-c59-v1|\
archer-c60-v1|\
+ fritz300e|\
mr12|\
mr16|\
nbg6616|\
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 4db1b148a2..b4d7817569 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -40,6 +40,24 @@ ath9k_ubi_eeprom_extract() {
ath9k_eeprom_die "failed to extract from $ubi"
}
+ath9k_eeprom_extract_reverse() {
+ local part=$1
+ local offset=$2
+ local count=$3
+ local mtd
+ local reversed
+ local caldata
+
+ mtd=$(find_mtd_chardev "$part")
+ reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
+
+ for byte in $reversed; do
+ caldata="\x${byte}${caldata}"
+ done
+
+ printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
+}
+
ath9k_patch_firmware_mac() {
local mac=$1
@@ -99,6 +117,9 @@ case "$FIRMWARE" in
ath9k_eeprom_extract "art" 20480 2048
ath9k_patch_firmware_mac $(macaddr_add $(mtd_get_mac_binary art 0) +2)
;;
+ fritz300e)
+ ath9k_eeprom_extract_reverse "urloader" 5441 1088
+ ;;
mr18)
. /lib/upgrade/nand.sh
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index a1abfa047d..ecc8dab36c 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -640,6 +640,9 @@ ar71xx_board_detect() {
*"ESR900")
name="esr900"
;;
+ *"FRITZ!WLAN Repeater 300E")
+ name="fritz300e"
+ ;;
*"GL AR150")
name="gl-ar150"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 4ee467180d..60e41c862e 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -647,6 +647,7 @@ platform_check_image() {
return 0;
;;
# these boards use metadata images
+ fritz300e|\
rb-750-r2|\
rb-750up-r2|\
rb-941-2nd|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 6ac3a9ede3..8a6335980c 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -107,6 +107,7 @@ CONFIG_ATH79_MACH_ESR1750=y
CONFIG_ATH79_MACH_ESR900=y
CONFIG_ATH79_MACH_EW_DORIN=y
CONFIG_ATH79_MACH_F9K1115V2=y
+CONFIG_ATH79_MACH_FRITZ300E=y
CONFIG_ATH79_MACH_GL_AR150=y
CONFIG_ATH79_MACH_GL_AR300=y
CONFIG_ATH79_MACH_GL_AR300M=y
@@ -350,6 +351,7 @@ CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_MIPS_CPU=y
CONFIG_IRQ_WORK=y
+CONFIG_LANTIQ_PHY=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_NU801=y
# CONFIG_LEDS_WNDR3700_USB is not set
@@ -386,6 +388,7 @@ CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
CONFIG_MTD_REDBOOT_PARTS=y
CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_EVA_FW=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_LZMA_FW=y
CONFIG_MTD_SPLIT_SEAMA_FW=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index 6182a6f47f..0df5a88dc3 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -2061,3 +2061,12 @@ config ATH79_MACH_TL_WPA8630
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+
+config ATH79_MACH_FRITZ300E
+ bool "AVM FRITZ!WLAN Repeater 300E support"
+ select SOC_AR724X
+ select ATH79_DEV_AP9X_PCI if PCI
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 5c22fafe51..5a848d0399 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -111,6 +111,7 @@ obj-$(CONFIG_ATH79_MACH_ESR1750) += mach-esr1750.o
obj-$(CONFIG_ATH79_MACH_ESR900) += mach-esr900.o
obj-$(CONFIG_ATH79_MACH_EW_DORIN) += mach-ew-dorin.o
obj-$(CONFIG_ATH79_MACH_F9K1115V2) += mach-f9k1115v2.o
+obj-$(CONFIG_ATH79_MACH_FRITZ300E) += mach-fritz300e.o
obj-$(CONFIG_ATH79_MACH_GL_AR150) += mach-gl-ar150.o
obj-$(CONFIG_ATH79_MACH_GL_AR300) += mach-gl-ar300.o
obj-$(CONFIG_ATH79_MACH_GL_AR300M) += mach-gl-ar300m.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c
new file mode 100644
index 0000000000..43af71a0a8
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c
@@ -0,0 +1,132 @@
+/*
+ * AVM FRITZ!WLAN Repeater 300E board support
+ *
+ * Copyright (C) 2017 Mathias Kresin <dev@kresin.me>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define FRITZ300E_KEYS_POLL_INTERVAL 20 /* msecs */
+#define FRITZ300E_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ300E_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition fritz300e_flash_partitions[] = {
+ {
+ .name = "urloader",
+ .offset = 0,
+ .size = 0x0020000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "firmware",
+ .offset = 0x0020000,
+ .size = 0x0ee0000,
+ }, {
+ .name = "tffs (1)",
+ .offset = 0x0f00000,
+ .size = 0x0080000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "tffs (2)",
+ .offset = 0x0f80000,
+ .size = 0x0080000,
+ .mask_flags = MTD_WRITEABLE,
+ }
+};
+
+static struct flash_platform_data fritz300e_flash_data = {
+ .parts = fritz300e_flash_partitions,
+ .nr_parts = ARRAY_SIZE(fritz300e_flash_partitions),
+};
+
+static struct gpio_led fritz300e_leds_gpio[] __initdata = {
+ {
+ .name = "fritz300e:green:power",
+ .gpio = 13,
+ .active_low = 1,
+ }, {
+ .name = "fritz300e:green:lan",
+ .gpio = 15,
+ .active_low = 1,
+ }, {
+ .name = "fritz300e:green:wlan",
+ .gpio = 16,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_led fritz300e_wmac_leds_gpio[] = {
+ {
+ .name = "fritz300e:green:rssi0",
+ .gpio = 10,
+ .active_low = 1,
+ }, {
+ .name = "fritz300e:green:rssi1",
+ .gpio = 4,
+ .active_low = 1,
+ }, {
+ .name = "fritz300e:green:rssi2",
+ .gpio = 6,
+ .active_low = 1,
+ }, {
+ .name = "fritz300e:green:rssi3",
+ .gpio = 7,
+ .active_low = 1,
+ }, {
+ .name = "fritz300e:green:rssi4",
+ .gpio = 5,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button fritz300e_gpio_keys[] __initdata = {
+ {
+ .desc = "wps",
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = FRITZ300E_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = 12,
+ .active_low = 1,
+ },
+};
+
+static void __init fritz300e_setup(void)
+{
+ /* get the Lantiq PEF7071V phy out of reset */
+ gpio_request_one(11, GPIOF_OUT_INIT_HIGH, "phy reset");
+
+ ath79_register_m25p80(&fritz300e_flash_data);
+
+ ath79_register_mdio(0, ~(BIT(0)));
+
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.speed = SPEED_1000;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+ ath79_eth0_data.phy_mask = BIT(0);
+
+ ath79_register_eth(0);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz300e_leds_gpio),
+ fritz300e_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, FRITZ300E_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(fritz300e_gpio_keys),
+ fritz300e_gpio_keys);
+
+ ap9x_pci_setup_wmac_leds(0, fritz300e_wmac_leds_gpio,
+ ARRAY_SIZE(fritz300e_wmac_leds_gpio));
+ ap91_pci_init_simple();
+}
+
+MIPS_MACHINE(ATH79_MACH_FRITZ300E, "FRITZ300E",
+ "AVM FRITZ!WLAN Repeater 300E", fritz300e_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 19d06c9834..8d0dfd662b 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -103,6 +103,7 @@ enum ath79_mach_type {
ATH79_MACH_EW_DORIN, /* embedded wireless Dorin Platform */
ATH79_MACH_EW_DORIN_ROUTER, /* embedded wireless Dorin Router Platform */
ATH79_MACH_F9K1115V2, /* Belkin AC1750DB */
+ ATH79_MACH_FRITZ300E, /* AVM FRITZ!WLAN Repeater 300E */
ATH79_MACH_GL_AR150, /* GL-AR150 support */
ATH79_MACH_GL_AR300, /* GL-AR300 */
ATH79_MACH_GL_AR300M, /* GL-AR300M */
diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk
index c293555d7b..56dcf5c997 100644
--- a/target/linux/ar71xx/image/generic.mk
+++ b/target/linux/ar71xx/image/generic.mk
@@ -878,3 +878,16 @@ define Device/zbt-we1526
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | pad-to $$$$(ROOTFS_SIZE) | append-kernel | check-size $$$$(IMAGE_SIZE)
endef
TARGET_DEVICES += zbt-we1526
+
+define Device/fritz300e
+ DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
+ DEVICE_PACKAGES := fritz-tffs rssileds -swconfig -uboot-envtools
+ BOARDNAME := FRITZ300E
+ SUPPORTED_DEVICES := fritz300e
+ IMAGE_SIZE := 15232k
+ KERNEL := kernel-bin | patch-cmdline | lzma | eva-image
+ IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
+ append-squashfs-fakeroot-be | pad-to 256 | \
+ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
+endef
+TARGET_DEVICES += fritz300e
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index f00933bd87..d0c8e49189 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -76,6 +76,7 @@
# CONFIG_ATH79_MACH_GL_AR300 is not set
# CONFIG_ATH79_MACH_GL_AR300M is not set
# CONFIG_ATH79_MACH_GL_DOMINO is not set
+# CONFIG_ATH79_MACH_FRITZ300E is not set
# CONFIG_ATH79_MACH_GL_INET is not set
# CONFIG_ATH79_MACH_GL_MIFI is not set
# CONFIG_ATH79_MACH_GS_MINIBOX_V1 is not set
@@ -215,6 +216,7 @@ CONFIG_CRC16=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_GPIO_74X164=y
CONFIG_GPIO_LATCH=y
+# CONFIG_LANTIQ_PHY is not set
CONFIG_LEDS_RB750=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_MTD_CFI is not set
@@ -230,6 +232,7 @@ CONFIG_MTD_NAND_RB4XX=y
CONFIG_MTD_NAND_RB750=y
CONFIG_MTD_NAND_RB91X=y
# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_SPLIT_EVA_FW is not set
# CONFIG_MTD_TPLINK_PARTS is not set
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index 41eacbf160..8420e15fb4 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -70,6 +70,7 @@
# CONFIG_ATH79_MACH_ESR900 is not set
# CONFIG_ATH79_MACH_EW_DORIN is not set
# CONFIG_ATH79_MACH_F9K1115V2 is not set
+# CONFIG_ATH79_MACH_FRITZ300E is not set
# CONFIG_ATH79_MACH_GL_AR150 is not set
# CONFIG_ATH79_MACH_GL_AR300 is not set
# CONFIG_ATH79_MACH_GL_AR300M is not set
@@ -197,6 +198,7 @@ CONFIG_ATH79_MACH_RAMBUTAN=y
# CONFIG_ATH79_NVRAM is not set
CONFIG_CMDLINE="rootfstype=squashfs noinitrd"
# CONFIG_IP17XX_PHY is not set
+# CONFIG_LANTIQ_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_MTD_CFI is not set
@@ -212,6 +214,7 @@ CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_ECC_BCH=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_SM_COMMON is not set
+# CONFIG_MTD_SPLIT_EVA_FW is not set
# CONFIG_MTD_SPLIT_SEAMA_FW is not set
# CONFIG_MTD_TPLINK_PARTS is not set
CONFIG_MTD_UBI=y