aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorPeter Lundkvist <peter.lundkvist@gmail.com>2018-03-17 18:47:51 +0100
committerMathias Kresin <dev@kresin.me>2018-03-18 22:22:38 +0100
commitd13b05741a4d05a271d26fc3be61e76530025098 (patch)
treefe804b278be33f45ff11b7994ece4d846a1e2423 /target
parenta5bd8de0bd80b83e43ce90ddc6623890344ad33d (diff)
downloadupstream-d13b05741a4d05a271d26fc3be61e76530025098.tar.gz
upstream-d13b05741a4d05a271d26fc3be61e76530025098.tar.bz2
upstream-d13b05741a4d05a271d26fc3be61e76530025098.zip
ramips: add support for TP-Link TL-WR902AC v3
TP-Link TL-WR902AC v3 is a pocket-size dual-band (AC750) router based on MediaTek MT7628N + MT7650E. Specification: - MediaTek MT7628N/N (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet * MT7650 ac chip isn't not supported by LEDE/OpenWrt at the moment. Therefore 5Ghz won' work. Flash instruction: The only way to flash LEDE image in TL-WR902AC v3 is to use tftp recovery mode in U-Boot: 1. Configure PC with static IP 192.168.0.66/24 and tftp server. 2. Rename "openwrt-ramips-mt76x8-tplink_tl-wr902ac-v3-squashfs-tftp-recovery.bin" to "tp_recovery.bin" and place it in tftp server directory. 3. Connect PC with the LAN port, press the reset button, power up the router and keep button pressed for around 6-7 seconds, until device starts downloading the file. 4. Router will download file from server, write it to flash and reboot. Signed-off-by: Peter Lundkvist <peter.lundkvist@gmail.com> [drop p2led_an pinmux, this pin isn't used as gpio, fix whitespace issues] Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds5
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ramips/base-files/etc/diag.sh1
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/TL-WR902ACV3.dts102
-rw-r--r--target/linux/ramips/image/mt76x8.mk15
6 files changed, 128 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index b068e62e87..4b8242cb9f 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -414,6 +414,11 @@ tplink,tl-mr3420-v5)
ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x1e"
ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
;;
+tplink,tl-wr902ac-v3)
+ set_usb_led "$boardname:green:usb"
+ ucidef_set_led_netdev "wlan2g" "wlan2g" "$boardname:green:wlan" "wlan0"
+ ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch0" "0x10"
+ ;;
u25awf-h1)
set_wifi_led "u25awf:red:wifi"
ucidef_set_led_netdev "eth" "eth" "u25awf:green:lan" "eth0"
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index d20b0aa1aa..03f718ee30 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -320,6 +320,10 @@ ramips_setup_interfaces()
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "0@eth0"
;;
+ tplink,tl-wr902ac-v3)
+ ucidef_add_switch "switch0" \
+ "4:lan" "6@eth0"
+ ;;
vonets,var11n-300|\
wt1520-4M|\
wt1520-8M)
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index 2dcc75a019..d9f131b2a8 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -41,6 +41,7 @@ get_status_led() {
tplink,c20-v4|\
tplink,c50-v3|\
tplink,tl-mr3420-v5|\
+ tplink,tl-wr902ac-v3|\
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13|\
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index e6489a2b58..b052cf8625 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -250,6 +250,7 @@ platform_check_image() {
tplink,c20-v4|\
tplink,c50-v3|\
tplink,tl-mr3420-v5|\
+ tplink,tl-wr902ac-v3|\
tl-wr840n-v4|\
tl-wr840n-v5|\
tl-wr841n-v13)
diff --git a/target/linux/ramips/dts/TL-WR902ACV3.dts b/target/linux/ramips/dts/TL-WR902ACV3.dts
new file mode 100644
index 0000000000..8ff3576595
--- /dev/null
+++ b/target/linux/ramips/dts/TL-WR902ACV3.dts
@@ -0,0 +1,102 @@
+/dts-v1/;
+
+#include "TPLINK-8M.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "tplink,tl-wr902ac-v3", "mediatek,mt7628an-soc";
+ model = "TP-Link TL-WR902AC v3";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ sw1 {
+ label = "sw1";
+ gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ };
+
+ sw2 {
+ label = "sw2";
+ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_1>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ lan {
+ label = "tl-wr902ac-v3:green:lan";
+ gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ power {
+ label = "tl-wr902ac-v3:green:power";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
+ usb {
+ label = "tl-wr902ac-v3:green:usb";
+ gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+ };
+
+ wan {
+ label = "tl-wr902ac-v3:green:wan";
+ gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "tl-wr902ac-v3:green:wlan";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "tl-wr902ac-v3:green:wps";
+ gpios = <&gpio0 4 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "i2c", "i2s", "p0led_an", "p4led_an", "uart1", "wdt", "wled_an";
+ ralink,function = "gpio";
+ };
+ };
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+
+ pcie-bridge {
+ mt76@1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x28000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ mtd-mac-address = <&factory 0xf100>;
+ mtd-mac-address-increment = <(-1)>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt76x8.mk b/target/linux/ramips/image/mt76x8.mk
index bcee98ef45..4362c3bc43 100644
--- a/target/linux/ramips/image/mt76x8.mk
+++ b/target/linux/ramips/image/mt76x8.mk
@@ -196,6 +196,21 @@ define Device/tplink_tl-mr3420-v5
endef
TARGET_DEVICES += tplink_tl-mr3420-v5
+define Device/tplink_tl-wr902ac-v3
+ $(Device/tplink)
+ DTS := TL-WR902ACV3
+ IMAGE_SIZE := 7808k
+ DEVICE_TITLE := TP-Link TL-WR902AC v3
+ TPLINK_FLASHLAYOUT := 8Mmtk
+ TPLINK_HWID := 0x000dc88f
+ TPLINK_HWREV := 0x89
+ TPLINK_HWREVADD := 0x1
+ TPLINK_HVERSION := 3
+ IMAGES += factory.bin
+ DEVICE_PACKAGES := kmod-usb2 kmod-usb-ohci kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += tplink_tl-wr902ac-v3
+
define Device/u7628-01-128M-16M
DTS := U7628-01-128M-16M
IMAGE_SIZE := 16064k