aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorAndrius Štikonas <andrius@stikonas.eu>2018-07-14 21:53:47 +0000
committerJohn Crispin <john@phrozen.org>2018-07-16 15:12:08 +0200
commitd591260407015d2c451ad8c9e114fe04cf3639bc (patch)
treea1e4883e39dcfaf39bcf9f24fd8fd553a761df5c /target
parentc3f9a1ac0e7ae536552e2745582dc47098cefc07 (diff)
downloadupstream-d591260407015d2c451ad8c9e114fe04cf3639bc.tar.gz
upstream-d591260407015d2c451ad8c9e114fe04cf3639bc.tar.bz2
upstream-d591260407015d2c451ad8c9e114fe04cf3639bc.zip
brcm63xx: initial support for Sky SR102 router
The sender domain has a DMARC Reject/Quarantine policy which disallows sending mailing list messages using the original "From" header. To mitigate this problem, the original message has been wrapped automatically by the mailing list software. SOC: BCM63168 (BMIPS4350 V8.0 @400MHz) Flash size: 16 MiB RAM size: 128 MiB Heavily based on patch for OpenWRT Chaos Chalmer. Original patch and more info can be found at: https://openwrt.org/toh/sky/sr102 Known issues: - Wireless and ADSL modem are not working. Signed-off-by: Andrius Štikonas <andrius@stikonas.eu>
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/brcm63xx/base-files/etc/board.d/02_network6
-rw-r--r--target/linux/brcm63xx/base-files/etc/diag.sh4
-rwxr-xr-xtarget/linux/brcm63xx/base-files/lib/brcm63xx.sh3
-rw-r--r--target/linux/brcm63xx/dts/sr102.dts120
-rw-r--r--target/linux/brcm63xx/image/bcm63xx.mk12
-rw-r--r--target/linux/brcm63xx/patches-4.9/598-board_sr102.patch75
-rw-r--r--target/linux/brcm63xx/profiles/sky.mk16
7 files changed, 236 insertions, 0 deletions
diff --git a/target/linux/brcm63xx/base-files/etc/board.d/02_network b/target/linux/brcm63xx/base-files/etc/board.d/02_network
index a7fd6f5d38..a2ca5a37b3 100755
--- a/target/linux/brcm63xx/base-files/etc/board.d/02_network
+++ b/target/linux/brcm63xx/base-files/etc/board.d/02_network
@@ -130,6 +130,12 @@ neufbox6)
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9t@eth0"
;;
+sr102)
+ ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+ ucidef_add_switch "switch0" \
+ "0:lan" "1:lan" "2:lan" "3:wan" "8t@eth0"
+ ;;
+
vg50)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8t@eth0"
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
index acb1795214..afb347818f 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -132,6 +132,10 @@ set_state() {
rta770w)
status_led="RTA770W:green:diag"
;;
+ sr102)
+ status_led="SR102:white:power"
+ status_led2="SR102:red:power"
+ ;;
spw500v)
status_led="SPW500V:green:power"
;;
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index 82abd737ce..1676ae0abb 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -237,6 +237,9 @@ brcm63xx_dt_detect() {
"SFR neufbox 6 (Sercomm)")
board_name="neufbox6"
;;
+ "SKY SR102")
+ board_name="sr102"
+ ;;
"T-Com Speedport W303 V")
board_name="spw303v"
;;
diff --git a/target/linux/brcm63xx/dts/sr102.dts b/target/linux/brcm63xx/dts/sr102.dts
new file mode 100644
index 0000000000..4d8cbd3435
--- /dev/null
+++ b/target/linux/brcm63xx/dts/sr102.dts
@@ -0,0 +1,120 @@
+/dts-v1/;
+
+#include "bcm63268.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "SKY SR102";
+ compatible = "sky,sr102", "brcm,bcm63268";
+
+ chosen {
+ bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
+ stdout-path = "serial0:115200n8";
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ debounce-interval = <60>;
+
+ wps {
+ label = "wps";
+ gpios = <&pinctrl 33 0>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ lan1_green {
+ label = "SR102:green:lan1";
+ gpios = <&pinctrl 1 1>;
+ };
+ power_red {
+ label = "SR102:red:power";
+ gpios = <&pinctrl 2 1>;
+ };
+ wifi_red {
+ label = "SR102:red:wifi";
+ gpios = <&pinctrl 3 1>;
+ };
+ inet_red {
+ label = "SR102:red:inet";
+ gpios = <&pinctrl 4 1>;
+ };
+ inet_white {
+ label = "SR102:white:inet";
+ gpios = <&pinctrl 5 0>;
+ };
+ power_white {
+ label = "SR102:white:power";
+ gpios = <&pinctrl 6 0>;
+ default-state = "on";
+ };
+ wifi_white {
+ label = "SR102:white:wifi";
+ gpios = <&pinctrl 8 0>;
+ };
+ lan2_red {
+ label = "SR102:red:lan2";
+ gpios = <&pinctrl 9 1>;
+ };
+ lan3_red {
+ label = "SR102:red:lan3";
+ gpios = <&pinctrl 10 1>;
+ };
+ lan4_red {
+ label = "SR102:red:lan4";
+ gpios = <&pinctrl 11 1>;
+ };
+ lan1_red {
+ label = "SR102:red:lan1";
+ gpios = <&pinctrl 12 1>;
+ };
+ lan2_green {
+ label = "SR102:green:lan2";
+ gpios = <&pinctrl 13 0>;
+ };
+ lan3_green {
+ label = "SR102:green:lan3";
+ gpios = <&pinctrl 14 1>;
+ };
+ lan4_green {
+ label = "SR102:green:lan4";
+ gpios = <&pinctrl 15 1>;
+ };
+ hd_white {
+ label = "SR102:white:hd";
+ gpios = <&pinctrl 18 0>;
+ };
+ };
+};
+
+&hsspi {
+ status = "ok";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <16666667>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ linux,part-probe = "bcm63xxpart";
+
+ partitions {
+ compatible = "brcm,bcm963xx-cfe-nor-partitions";
+ };
+ };
+};
+
+&uart0 {
+ status = "ok";
+};
diff --git a/target/linux/brcm63xx/image/bcm63xx.mk b/target/linux/brcm63xx/image/bcm63xx.mk
index b9ecd54064..6a2a9bfb4a 100644
--- a/target/linux/brcm63xx/image/bcm63xx.mk
+++ b/target/linux/brcm63xx/image/bcm63xx.mk
@@ -1020,6 +1020,18 @@ define Device/NEUFBOX6
endef
TARGET_DEVICES += NEUFBOX6
+define Device/SR102
+ $(Device/bcm63xx)
+ DEVICE_TITLE := SKY-SR102
+ DEVICE_DTS := sr102
+ CFE_BOARD_ID := BSKYB_63168
+ CFE_CHIP_ID := 63268
+ CFE_EXTRAS += --rsa-signature "$(VERSION_DIST)-$(firstword $(subst -,$(space),$(REVISION)))"
+ DEVICE_PACKAGES := \
+ $(B43_PACKAGES) $(USB2_PACKAGES)
+endef
+TARGET_DEVICES += SR102
+
### T-Com ###
define Device/SPW303V
$(Device/bcm63xx)
diff --git a/target/linux/brcm63xx/patches-4.9/598-board_sr102.patch b/target/linux/brcm63xx/patches-4.9/598-board_sr102.patch
new file mode 100644
index 0000000000..1a9578ead1
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.9/598-board_sr102.patch
@@ -0,0 +1,75 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2457,6 +2457,56 @@
+ },
+ },
+ };
++
++static struct board_info __initdata board_BSKYB_63168 = {
++ .name = "BSKYB_63168",
++ .expected_cpu_id = 0x63268,
++
++ .has_pci = 1,
++ .use_fallback_sprom = 0,
++
++ .has_ehci0 = 1,
++ .has_ohci0 = 1,
++ .num_usbh_ports = 2,
++
++ .has_enetsw = 1,
++
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "Port 1",
++ },
++
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "Port 2",
++ },
++
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "Port 3",
++ },
++
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "Port 4",
++ },
++
++ },
++ },
++/*
++ .fallback_sprom = {
++ .type = SPROM_BCM435F,
++ .pci_bus = 0,
++ .pci_dev = 0,
++ },
++*/
++};
+ #endif /* CONFIG_BCM63XX_CPU_63268 */
+
+ /*
+@@ -2557,6 +2609,7 @@
+ &board_963268bu_p300,
+ &board_963269bhr,
+ &board_vw6339gu,
++ &board_BSKYB_63168,
+ #endif
+ };
+
+@@ -2661,6 +2714,7 @@
+ { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, },
+ { .compatible = "brcm,bcm963269bhr", .data = &board_963269bhr, },
+ { .compatible = "inteno,vg50", .data = &board_vw6339gu, },
++ { .compatible = "sky,sr102", .data = &board_BSKYB_63168, },
+ #endif
+ #endif /* CONFIG_OF */
+ { },
diff --git a/target/linux/brcm63xx/profiles/sky.mk b/target/linux/brcm63xx/profiles/sky.mk
new file mode 100644
index 0000000000..f209794800
--- /dev/null
+++ b/target/linux/brcm63xx/profiles/sky.mk
@@ -0,0 +1,16 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/SR102
+ NAME:=SKY SR102
+ PACKAGES:=kmod-b43 wpad-mini \
+ kmod-usb2 kmod-usb-ohci
+endef
+define Profile/SR102/Description
+ Package set optimized for SKY SR102.
+endef
+$(eval $(call Profile,SR102))