aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorAnton Arapov <arapov@gmail.com>2018-12-29 01:28:27 +0100
committerMathias Kresin <dev@kresin.me>2019-01-05 12:28:22 +0100
commit52f2d7d2a9dc3e142bb957462a30806eb5cebaf4 (patch)
treeee2f1c8361272cedff87f220d059c3a0093425fb /target
parenta54129d8aa62e63d2e1ab483cf67411d144f19d9 (diff)
downloadupstream-52f2d7d2a9dc3e142bb957462a30806eb5cebaf4.tar.gz
upstream-52f2d7d2a9dc3e142bb957462a30806eb5cebaf4.tar.bz2
upstream-52f2d7d2a9dc3e142bb957462a30806eb5cebaf4.zip
ramips: add RB750Gr3 native support
This patch adds support of MikroTik RouterBOARD 750Gr3, without the need to reflashing the bootloader. Installation through RouterBoot follows the usual MikroTik method https://openwrt.org/toh/mikrotik/common Since the image isn't compatible with RouterBOARD 750Gr3 installations which have replaced the bootloader, the former used userspace boardname is not added to the SUPPORTED_DEVICES, to prevent a brick while trying to upgrade to the image with native support. Signed-off-by: Anton Arapov <arapov@gmail.com> Signed-off-by: Thibaut VARĂˆNE <hacks@slashdirt.org> Signed-off-by: Mathias Kresin <dev@kresin.me>
Diffstat (limited to 'target')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network2
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ramips/dts/RB750Gr3.dts58
-rw-r--r--target/linux/ramips/image/mt7621.mk15
5 files changed, 48 insertions, 31 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 2dbd891574..80940db763 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -222,9 +222,9 @@ ramips_setup_interfaces()
jhr-n805r|\
jhr-n825r|\
jhr-n926r|\
+ mikrotik,rb750gr3|\
mikrotik,rbm33g|\
mzk-wdpr|\
- rb750gr3|\
rt-n14u|\
skylab,skw92a|\
tplink,c20-v4|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index ca71ef3b84..49bed87c48 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -415,9 +415,6 @@ ramips_board_detect() {
*"R6220")
name="r6220"
;;
- *"RB750Gr3")
- name="rb750gr3"
- ;;
*"RE350 v1")
name="re350-v1"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 97fbaefea6..a50e943bc9 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -13,6 +13,7 @@ platform_pre_upgrade() {
local board=$(board_name)
case "$board" in
+ mikrotik,rb750gr3|\
mikrotik,rbm11g|\
mikrotik,rbm33g)
[ -z "$(rootfs_type)" ] && mtd erase firmware
diff --git a/target/linux/ramips/dts/RB750Gr3.dts b/target/linux/ramips/dts/RB750Gr3.dts
index 6b18cce78f..da9167ad81 100644
--- a/target/linux/ramips/dts/RB750Gr3.dts
+++ b/target/linux/ramips/dts/RB750Gr3.dts
@@ -22,7 +22,7 @@
};
chosen {
- bootargs = "console=ttyS0,57600";
+ bootargs = "console=ttyS0,115200";
};
gpio-leds {
@@ -89,34 +89,54 @@
#size-cells = <1>;
partition@0 {
- label = "u-boot";
- reg = <0x0 0x30000>;
+ label = "RouterBoot";
+ reg = <0x0 0x40000>;
read-only;
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bootloader1";
+ reg = <0x0 0xf000>;
+ read-only;
+ };
+
+ hard_config: partition@f000 {
+ label = "hard_config";
+ reg = <0xf000 0x1000>;
+ read-only;
+ };
+
+ partition@10000 {
+ label = "bootloader2";
+ reg = <0x10000 0xf000>;
+ read-only;
+ };
+
+ partition@20000 {
+ label = "soft_config";
+ reg = <0x20000 0x1000>;
+ };
+
+ partition@30000 {
+ label = "bios";
+ reg = <0x30000 0x1000>;
+ read-only;
+ };
};
- partition@30000 {
- label = "u-boot-env";
- reg = <0x30000 0x10000>;
- read-only;
- };
-
- factory: partition@40000 {
- label = "factory";
- reg = <0x40000 0x10000>;
- read-only;
- };
-
- partition@50000 {
- compatible = "denx,uimage";
+ partition@40000 {
+ compatible = "mikrotik,minor";
label = "firmware";
- reg = <0x50000 0xfb0000>;
+ reg = <0x040000 0xfc0000>;
};
};
};
};
&ethernet {
- mtd-mac-address = <&factory 0xe000>;
+ mtd-mac-address = <&hard_config 0x0010>;
mtd-mac-address-increment = <1>;
};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 0edc8afcae..3f0c4bb76e 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -324,14 +324,6 @@ define Device/netgear_r6350
endef
TARGET_DEVICES += netgear_r6350
-define Device/rb750gr3
- DTS := RB750Gr3
- IMAGE_SIZE := $(ralink_default_fw_size_16M)
- DEVICE_TITLE := MikroTik RB750Gr3
- DEVICE_PACKAGES := kmod-usb3 uboot-envtools
-endef
-TARGET_DEVICES += rb750gr3
-
define Device/MikroTik
BLOCKSIZE := 64k
IMAGE_SIZE := 16128k
@@ -343,6 +335,13 @@ define Device/MikroTik
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
endef
+define Device/mikrotik_rb750gr3
+ $(Device/MikroTik)
+ DTS := RB750Gr3
+ DEVICE_TITLE := MikroTik RouterBOARD RB750Gr3
+endef
+TARGET_DEVICES += mikrotik_rb750gr3
+
define Device/mikrotik_rbm33g
$(Device/MikroTik)
DTS := RBM33G