diff options
author | David Bauer <mail@david-bauer.net> | 2020-03-08 21:39:19 +0100 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2020-03-10 21:54:46 +0100 |
commit | 4c8446bf39de99990847eb4bc7744e25835a34f5 (patch) | |
tree | 8315c46efcb3a698533c22f8cedaf4a0825c7eb3 /target | |
parent | 0c4d91f121b7a3660dbf433a8a6858573a86d137 (diff) | |
download | upstream-4c8446bf39de99990847eb4bc7744e25835a34f5.tar.gz upstream-4c8446bf39de99990847eb4bc7744e25835a34f5.tar.bz2 upstream-4c8446bf39de99990847eb4bc7744e25835a34f5.zip |
ramips: add support for Ubiquiti UniFi nanoHD
Hardware
--------
SoC: MediaTek MT7621AT
WiFi: MediaTek MT7603 bgn 2T2R
MediaTek MT7615 ac 4T4R
Flash: 32M SPI (Macronix MX25L25635F)
RAM: 128M DDR3 (Winbond W631GG6KB)
LED: Dome (Blue / White)
BTN: Reset
Installation
------------
These instructions were written for firmware version v3.9.27.
Downgrade if necessary.
1. Copy the OpenWrt sysupgrade image to the devices /tmp folder
via scp. On factory defaults, user and password is "ubnt" at
192.168.1.20/24.
2. Write the bootselect flag. Otherwise, the device might boot from the
wrong partition. Verify the mtd partition used in the command below
is the one labled "bs" in /proc/mtd (as this might change in the
future).
> dd if=/dev/zero bs=1 count=1 of=/dev/mtd4
3. Write the OpenWrt sysupgrade to the mtd partitions labled
"kernel0" and "kernel1".
> dd if=/tmp/openwrt-sysupgrade.bin of=/dev/mtdblock6
> dd if=/tmp/openwrt-sysupgrade.bin of=/dev/mtdblock7
4. Reboot or powercycle the device.
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target')
-rw-r--r-- | target/linux/ramips/dts/mt7621_ubnt_unifi-nanohd.dts | 141 | ||||
-rw-r--r-- | target/linux/ramips/image/mt7621.mk | 8 | ||||
-rwxr-xr-x | target/linux/ramips/mt7621/base-files/etc/board.d/02_network | 3 |
3 files changed, 151 insertions, 1 deletions
diff --git a/target/linux/ramips/dts/mt7621_ubnt_unifi-nanohd.dts b/target/linux/ramips/dts/mt7621_ubnt_unifi-nanohd.dts new file mode 100644 index 0000000000..903cbc6125 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_ubnt_unifi-nanohd.dts @@ -0,0 +1,141 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT +/dts-v1/; + +#include "mt7621.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "ubnt,unifi-nanohd", "mediatek,mt7621-soc"; + model = "Ubiquiti UniFi nanoHD"; + + aliases { + led-boot = &led_white; + led-failsafe = &led_white; + led-running = &led_blue; + led-upgrade = &led_blue; + + label-mac-device = ðernet; + }; + + chosen { + bootargs = "console=ttyS0,115200"; + }; + + leds { + compatible = "gpio-leds"; + + led_blue: dome_blue { + label = "nanohd:blue:dome"; + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + }; + + led_white: dome_white { + label = "nanohd:white:dome"; + gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "mx25l25635f", "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x60000>; + read-only; + }; + + partition@60000 { + label = "u-boot-env"; + reg = <0x60000 0x10000>; + read-only; + }; + + factory: partition@70000 { + label = "factory"; + reg = <0x70000 0x10000>; + read-only; + }; + + eeprom: partition@80000 { + label = "eeprom"; + reg = <0x80000 0x10000>; + read-only; + }; + + partition@90000 { + label = "bs"; + reg = <0x90000 0x10000>; + }; + + partition@a0000 { + label = "cfg"; + reg = <0xa0000 0x100000>; + read-only; + }; + + partition@1a0000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x1a0000 0xf30000>; + }; + + partition@10d0000 { + label = "kernel1"; + reg = <0x10d0000 0xf30000>; + read-only; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + reg = <0x0 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0000>; + }; +}; + +&pcie1 { + wifi@0,0 { + reg = <0x0 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x8000>; + }; +}; + +ðernet { + mtd-mac-address = <&eeprom 0x0>; +}; + +&state_default { + gpio { + ralink,group = "i2c", "uart2"; + ralink,function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index 98d83f944f..f24830bfb7 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -792,6 +792,14 @@ define Device/ubiquiti_edgerouterx-sfp endef TARGET_DEVICES += ubiquiti_edgerouterx-sfp +define Device/ubnt_unifi-nanohd + DEVICE_VENDOR := Ubiquiti + DEVICE_MODEL := UniFi nanoHD + DEVICE_PACKAGES += kmod-mt7603 kmod-mt7615e wpad-basic + IMAGE_SIZE := 15552k +endef +TARGET_DEVICES += ubnt_unifi-nanohd + define Device/unielec_u7621-06-16m IMAGE_SIZE := 16064k DEVICE_VENDOR := UniElec diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index c930f34592..a68ffe6126 100755 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -129,7 +129,8 @@ ramips_setup_interfaces() ;; netgear,ex6150|\ tplink,re350-v1|\ - tplink,re650-v1) + tplink,re650-v1|\ + ubnt,unifi-nanohd) ucidef_add_switch "switch0" \ "0:lan" "6@eth0" ;; |