ramips: TEW-691GR.dts fixes

* fix pinmux settings
* remove spi node
* add nor-flash node
* enable mdio-bus and add phy handle

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@36276 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 43 insertions, 15 deletions

diff --git a/target/linux/ramips/dts/TEW-691GR.dts b/target/linux/ramips/dts/TEW-691GR.dts
index 423aa6dc18..4f877323f0 100644
--- a/target/linux/ramips/dts/TEW-691GR.dts
+++ b/target/linux/ramips/dts/TEW-691GR.dts
@@ -12,9 +12,10 @@
 
 	palmbus@10000000 {
 		sysc@0 {
-			ralink,pinmux = "uartlite", "spi";
+			ralink,pinmux = "uartlite";
 			ralink,gpiomux = "i2c", "jtag";
 			ralink,uartmux = "gpio";
+			ralink,pcimux = "pci-fnc";
 			ralink,wdtmux = <1>;
 		};
 
@@ -29,25 +30,20 @@
 		gpio1: gpio@638 {
 			status = "okay";
 		};
-
-		spi@b00 {
-			status = "okay";
-
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mx25l6405d";
-				reg = <0 0>;
-				linux,modalias = "m25p80";
-				spi-max-frequency = <25000000>;
-			};
-		};
 	};
 
 	ethernet@10100000 {
 		status = "okay";
-		ralink,phy-mask = <0x1>;
+		phy-handle = <&phy0>;
 		phy-mode = "rgmii";
+
+		mdio-bus {
+			status = "okay";
+
+			phy0: ethernet-phy@0 {
+				reg = <0>;
+			};
+		};
 	};
 
 	wmac@10180000 {
@@ -55,6 +51,38 @@
 		ralink,5ghz = <0>;
 	};
 
+	nor-flash@1c000000 {
+		compatible = "cfi-flash";
+		reg = <0x1c000000 0x800000>;
+
+		bank-width = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			reg = <0x0 0x0030000>;
+			label = "u-boot";
+			read-only;
+		};
+
+		partition@30000 {
+			reg = <0x00030000 0x00010000>;
+			label = "u-boot-env";
+			read-only;
+		};
+
+		partition@40000 {
+			reg = <0x00040000 0x00010000>;
+			label = "factory";
+			read-only;
+		};
+
+		partition@50000 {
+			reg = <0x00050000 0x007b0000>;
+			label = "firmware";
+		};
+	};
+
 	gpio-keys-polled {
 		compatible = "gpio-keys-polled";
 		#address-cells = <1>;