aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorMatteo Croce <matteo@openwrt.org>2008-07-05 14:49:07 +0000
committerMatteo Croce <matteo@openwrt.org>2008-07-05 14:49:07 +0000
commit23bad480351a193d209f289d26a3baafbd3a00b8 (patch)
tree73564b0f5370256688f5aa165a727f9f398a37a9 /target
parent292f31875805d68ba529582cc26c38de11a851da (diff)
downloadupstream-23bad480351a193d209f289d26a3baafbd3a00b8.tar.gz
upstream-23bad480351a193d209f289d26a3baafbd3a00b8.tar.bz2
upstream-23bad480351a193d209f289d26a3baafbd3a00b8.zip
avr32: update to latest atmel sources
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11665 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
-rw-r--r--target/linux/avr32/Makefile2
-rw-r--r--target/linux/avr32/config-default2
-rw-r--r--target/linux/avr32/patches/100-git_sync.patch2609
-rw-r--r--target/linux/avr32/patches/120-fast_sd_cards_fix.patch43
4 files changed, 1600 insertions, 1056 deletions
diff --git a/target/linux/avr32/Makefile b/target/linux/avr32/Makefile
index 5bb4928270..650d4936bf 100644
--- a/target/linux/avr32/Makefile
+++ b/target/linux/avr32/Makefile
@@ -10,7 +10,7 @@ ARCH:=avr32
BOARD:=avr32
BOARDNAME:=Atmel AVR32
FEATURES:=squashfs
-LINUX_VERSION:=2.6.25.9
+LINUX_VERSION:=2.6.25.10
include $(INCLUDE_DIR)/target.mk
diff --git a/target/linux/avr32/config-default b/target/linux/avr32/config-default
index 3fbfb59e89..d26ad893fc 100644
--- a/target/linux/avr32/config-default
+++ b/target/linux/avr32/config-default
@@ -128,12 +128,14 @@ CONFIG_MTD_PHYSMAP_START=0x80000000
# CONFIG_NEED_NODE_MEMMAP_SIZE is not set
# CONFIG_NMI_DEBUGGING is not set
CONFIG_NO_HZ=y
+CONFIG_NR_QUICK=2
# CONFIG_OWNERSHIP_TRACE is not set
CONFIG_PERFORMANCE_COUNTERS=y
CONFIG_PHYLIB=y
CONFIG_PHYS_OFFSET=0x10000000
CONFIG_PLATFORM_AT32AP=y
# CONFIG_QSEMI_PHY is not set
+CONFIG_QUICKLIST=y
# CONFIG_REALTEK_PHY is not set
CONFIG_RTC_CLASS=m
CONFIG_RTC_DRV_AT32AP700X=m
diff --git a/target/linux/avr32/patches/100-git_sync.patch b/target/linux/avr32/patches/100-git_sync.patch
index 9bab060196..f1e1cf733b 100644
--- a/target/linux/avr32/patches/100-git_sync.patch
+++ b/target/linux/avr32/patches/100-git_sync.patch
@@ -1,3 +1,105 @@
+--- a/Documentation/serial/driver
++++ b/Documentation/serial/driver
+@@ -186,6 +186,17 @@
+ Locking: port_sem taken.
+ Interrupts: caller dependent.
+
++ flush_buffer(port)
++ Flush any write buffers, reset any DMA state and stop any
++ ongoing DMA transfers.
++
++ This will be called whenever the port->info->xmit circular
++ buffer is cleared.
++
++ Locking: port->lock taken.
++ Interrupts: locally disabled.
++ This call must not sleep
++
+ set_termios(port,termios,oldtermios)
+ Change the port parameters, including word length, parity, stop
+ bits. Update read_status_mask and ignore_status_mask to indicate
+--- a/arch/avr32/Kconfig
++++ b/arch/avr32/Kconfig
+@@ -47,6 +47,9 @@
+ config GENERIC_TIME
+ def_bool y
+
++config GENERIC_CLOCKEVENTS
++ def_bool y
++
+ config RWSEM_XCHGADD_ALGORITHM
+ def_bool n
+
+@@ -70,6 +73,8 @@
+
+ menu "System Type and features"
+
++source "kernel/time/Kconfig"
++
+ config SUBARCH_AVR32B
+ bool
+ config MMU
+@@ -83,6 +88,7 @@
+ select MMU
+ select PERFORMANCE_COUNTERS
+ select HAVE_GPIO_LIB
++ select GENERIC_ALLOCATOR
+
+ #
+ # CPU types
+@@ -117,6 +123,9 @@
+ if BOARD_ATSTK1000
+ source "arch/avr32/boards/atstk1000/Kconfig"
+ endif
++if BOARD_ATNGW100
++source "arch/avr32/boards/atngw100/Kconfig"
++endif
+
+ choice
+ prompt "Boot loader type"
+@@ -142,6 +151,9 @@
+
+ source "kernel/Kconfig.preempt"
+
++config QUICKLIST
++ def_bool y
++
+ config HAVE_ARCH_BOOTMEM_NODE
+ def_bool n
+
+@@ -180,6 +192,10 @@
+ be dumped to the console when a Non-Maskable Interrupt
+ happens.
+
++config DW_DMAC
++ tristate "Synopsys DesignWare DMA Controller support"
++ default y if CPU_AT32AP7000
++
+ # FPU emulation goes here
+
+ source "kernel/Kconfig.hz"
+@@ -196,6 +212,11 @@
+
+ menu "Power management options"
+
++config ARCH_SUSPEND_POSSIBLE
++ def_bool y
++
++source "kernel/power/Kconfig"
++
+ menu "CPU Frequency scaling"
+
+ source "drivers/cpufreq/Kconfig"
+--- a/arch/avr32/Makefile
++++ b/arch/avr32/Makefile
+@@ -32,6 +32,7 @@
+ core-y += arch/avr32/kernel/
+ core-y += arch/avr32/mm/
+ drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
++drivers-y += arch/avr32/drivers/
+ libs-y += arch/avr32/lib/
+
+ archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
--- /dev/null
+++ b/arch/avr32/boards/atngw100/Kconfig
@@ -0,0 +1,12 @@
@@ -87,6 +189,87 @@
return 0;
}
+--- a/arch/avr32/boards/atstk1000/Kconfig
++++ b/arch/avr32/boards/atstk1000/Kconfig
+@@ -18,6 +18,10 @@
+ bool "ATSTK1004"
+ select CPU_AT32AP7002
+
++config BOARD_ATSTK1006
++ bool "ATSTK1006"
++ select CPU_AT32AP7000
++
+ endchoice
+
+
+@@ -102,4 +106,60 @@
+ depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
+ default y
+
++config BOARD_ATSTK100X_ENABLE_AC97
++ bool "Use AC97C instead of ABDAC"
++ help
++ Select this if you want to use the built-in AC97 controller
++ instead of the built-in Audio Bitstream DAC. These share
++ the same I/O pins on the AP7000, so both can't be enabled
++ at the same time.
++
++ Note that the STK1000 kit doesn't ship with an AC97 codec on
++ board, so say N unless you've got an expansion board with an
++ AC97 codec on it that you want to use.
++
++config BOARD_ATSTK1000_CF_HACKS
++ bool "ATSTK1000 CompactFlash hacks"
++ depends on !BOARD_ATSTK100X_SW4_CUSTOM
++ help
++ Select this if you have re-routed the CompactFlash RESET and
++ CD signals to GPIOs on your STK1000. This is necessary for
++ reset and card detection to work properly, although some CF
++ cards may be able to cope without reset.
++
++config BOARD_ATSTK1000_CF_RESET_PIN
++ hex "CompactFlash RESET pin"
++ default 0x30
++ depends on BOARD_ATSTK1000_CF_HACKS
++ help
++ Select which GPIO pin to use for the CompactFlash RESET
++ signal. This is specified as a hexadecimal number and should
++ be defined as 0x20 * gpio_port + pin.
++
++ The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
++
++config BOARD_ATSTK1000_CF_DETECT_PIN
++ hex "CompactFlash DETECT pin"
++ default 0x3e
++ depends on BOARD_ATSTK1000_CF_HACKS
++ help
++ Select which GPIO pin to use for the CompactFlash CD
++ signal. This is specified as a hexadecimal number and should
++ be defined as 0x20 * gpio_port + pin.
++
++ The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
++
++config BOARD_ATSTK100X_ENABLE_PSIF
++ bool "Enable PSIF peripheral (PS/2 support)"
++ default n
++ help
++ Select this if you want to use the PSIF peripheral to hook up PS/2
++ devices to your STK1000. This will require a hardware modification to
++ work correctly, since PS/2 devices require 5 volt power and signals,
++ while the STK1000 only provides 3.3 volt.
++
++ Say N if you have not modified the hardware to boost the voltage, say
++ Y if you have level convertion hardware or a PS/2 device capable of
++ operating on 3.3 volt.
++
+ endif # stk 1000
+--- a/arch/avr32/boards/atstk1000/Makefile
++++ b/arch/avr32/boards/atstk1000/Makefile
+@@ -2,3 +2,4 @@
+ obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
+ obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
+ obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
++obj-$(CONFIG_BOARD_ATSTK1006) += atstk1002.o
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -1,7 +1,7 @@
@@ -230,7 +413,7 @@
#endif
at32_add_device_usba(0, NULL);
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+ at32_add_device_ac97c(0);
++ at32_add_device_ac97c(0, NULL);
+#else
+ at32_add_device_abdac(0);
+#endif
@@ -290,7 +473,7 @@
#endif
at32_add_device_usba(0, NULL);
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+ at32_add_device_ac97c(0);
++ at32_add_device_ac97c(0, NULL);
+#else
+ at32_add_device_abdac(0);
+#endif
@@ -333,7 +516,7 @@
+ fbmem_start, fbmem_size, 0);
at32_add_device_usba(0, NULL);
+#ifdef CONFIG_BOARD_ATSTK100X_ENABLE_AC97
-+ at32_add_device_ac97c(0);
++ at32_add_device_ac97c(0, NULL);
+#else
+ at32_add_device_abdac(0);
+#endif
@@ -347,87 +530,6 @@
atstk1000_setup_j2_leds();
atstk1004_setup_extdac();
---- a/arch/avr32/boards/atstk1000/Kconfig
-+++ b/arch/avr32/boards/atstk1000/Kconfig
-@@ -18,6 +18,10 @@
- bool "ATSTK1004"
- select CPU_AT32AP7002
-
-+config BOARD_ATSTK1006
-+ bool "ATSTK1006"
-+ select CPU_AT32AP7000
-+
- endchoice
-
-
-@@ -102,4 +106,60 @@
- depends on !BOARD_ATSTK100X_SW1_CUSTOM && !BOARD_ATSTK100X_SW3_CUSTOM
- default y
-
-+config BOARD_ATSTK100X_ENABLE_AC97
-+ bool "Use AC97C instead of ABDAC"
-+ help
-+ Select this if you want to use the built-in AC97 controller
-+ instead of the built-in Audio Bitstream DAC. These share
-+ the same I/O pins on the AP7000, so both can't be enabled
-+ at the same time.
-+
-+ Note that the STK1000 kit doesn't ship with an AC97 codec on
-+ board, so say N unless you've got an expansion board with an
-+ AC97 codec on it that you want to use.
-+
-+config BOARD_ATSTK1000_CF_HACKS
-+ bool "ATSTK1000 CompactFlash hacks"
-+ depends on !BOARD_ATSTK100X_SW4_CUSTOM
-+ help
-+ Select this if you have re-routed the CompactFlash RESET and
-+ CD signals to GPIOs on your STK1000. This is necessary for
-+ reset and card detection to work properly, although some CF
-+ cards may be able to cope without reset.
-+
-+config BOARD_ATSTK1000_CF_RESET_PIN
-+ hex "CompactFlash RESET pin"
-+ default 0x30
-+ depends on BOARD_ATSTK1000_CF_HACKS
-+ help
-+ Select which GPIO pin to use for the CompactFlash RESET
-+ signal. This is specified as a hexadecimal number and should
-+ be defined as 0x20 * gpio_port + pin.
-+
-+ The default is 0x30, which is pin 16 on PIOB, aka GPIO14.
-+
-+config BOARD_ATSTK1000_CF_DETECT_PIN
-+ hex "CompactFlash DETECT pin"
-+ default 0x3e
-+ depends on BOARD_ATSTK1000_CF_HACKS
-+ help
-+ Select which GPIO pin to use for the CompactFlash CD
-+ signal. This is specified as a hexadecimal number and should
-+ be defined as 0x20 * gpio_port + pin.
-+
-+ The default is 0x3e, which is pin 30 on PIOB, aka GPIO15.
-+
-+config BOARD_ATSTK100X_ENABLE_PSIF
-+ bool "Enable PSIF peripheral (PS/2 support)"
-+ default n
-+ help
-+ Select this if you want to use the PSIF peripheral to hook up PS/2
-+ devices to your STK1000. This will require a hardware modification to
-+ work correctly, since PS/2 devices require 5 volt power and signals,
-+ while the STK1000 only provides 3.3 volt.
-+
-+ Say N if you have not modified the hardware to boost the voltage, say
-+ Y if you have level convertion hardware or a PS/2 device capable of
-+ operating on 3.3 volt.
-+
- endif # stk 1000
---- a/arch/avr32/boards/atstk1000/Makefile
-+++ b/arch/avr32/boards/atstk1000/Makefile
-@@ -2,3 +2,4 @@
- obj-$(CONFIG_BOARD_ATSTK1002) += atstk1002.o
- obj-$(CONFIG_BOARD_ATSTK1003) += atstk1003.o
- obj-$(CONFIG_BOARD_ATSTK1004) += atstk1004.o
-+obj-$(CONFIG_BOARD_ATSTK1006) += atstk1002.o
--- a/arch/avr32/configs/atngw100_defconfig
+++ b/arch/avr32/configs/atngw100_defconfig
@@ -1,7 +1,7 @@
@@ -3542,6 +3644,10 @@
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
--- /dev/null
++++ b/arch/avr32/drivers/Makefile
+@@ -0,0 +1 @@
++obj-$(CONFIG_DW_DMAC) += dw-dmac.o
+--- /dev/null
+++ b/arch/avr32/drivers/dw-dmac.c
@@ -0,0 +1,761 @@
+/*
@@ -4350,72 +4456,16 @@
+#define DW_DMAC_CHAN_DSR 0x050
+
+#endif /* __AVR32_DW_DMAC_H__ */
---- /dev/null
-+++ b/arch/avr32/drivers/Makefile
-@@ -0,0 +1 @@
-+obj-$(CONFIG_DW_DMAC) += dw-dmac.o
---- a/arch/avr32/Kconfig
-+++ b/arch/avr32/Kconfig
-@@ -47,6 +47,9 @@
- config GENERIC_TIME
- def_bool y
-
-+config GENERIC_CLOCKEVENTS
-+ def_bool y
-+
- config RWSEM_XCHGADD_ALGORITHM
- def_bool n
-
-@@ -70,6 +73,8 @@
-
- menu "System Type and features"
-
-+source "kernel/time/Kconfig"
-+
- config SUBARCH_AVR32B
- bool
- config MMU
-@@ -83,6 +88,7 @@
- select MMU
- select PERFORMANCE_COUNTERS
- select HAVE_GPIO_LIB
-+ select GENERIC_ALLOCATOR
-
- #
- # CPU types
-@@ -117,6 +123,9 @@
- if BOARD_ATSTK1000
- source "arch/avr32/boards/atstk1000/Kconfig"
- endif
-+if BOARD_ATNGW100
-+source "arch/avr32/boards/atngw100/Kconfig"
-+endif
-
- choice
- prompt "Boot loader type"
-@@ -180,6 +189,10 @@
- be dumped to the console when a Non-Maskable Interrupt
- happens.
-
-+config DW_DMAC
-+ tristate "Synopsys DesignWare DMA Controller support"
-+ default y if CPU_AT32AP7000
-+
- # FPU emulation goes here
-
- source "kernel/Kconfig.hz"
-@@ -196,6 +209,11 @@
-
- menu "Power management options"
-
-+config ARCH_SUSPEND_POSSIBLE
-+ def_bool y
-+
-+source "kernel/power/Kconfig"
-+
- menu "CPU Frequency scaling"
-
- source "drivers/cpufreq/Kconfig"
+--- a/arch/avr32/kernel/Makefile
++++ b/arch/avr32/kernel/Makefile
+@@ -9,6 +9,7 @@
+ obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o
+ obj-y += signal.o sys_avr32.o process.o time.o
+ obj-y += init_task.o switch_to.o cpu.o
++obj-y += dma-controller.o
+ obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
+ obj-$(CONFIG_KPROBES) += kprobes.o
+ obj-$(CONFIG_STACKTRACE) += stacktrace.o
--- a/arch/avr32/kernel/avr32_ksyms.c
+++ b/arch/avr32/kernel/avr32_ksyms.c
@@ -29,7 +29,9 @@
@@ -4476,7 +4526,147 @@
+EXPORT_SYMBOL(find_dma_controller);
--- a/arch/avr32/kernel/entry-avr32b.S
+++ b/arch/avr32/kernel/entry-avr32b.S
-@@ -741,26 +741,6 @@
+@@ -74,50 +74,41 @@
+ .align 2
+ bral do_dtlb_modified
+
+- /*
+- * r0 : PGD/PT/PTE
+- * r1 : Offending address
+- * r2 : Scratch register
+- * r3 : Cause (5, 12 or 13)
+- */
+ #define tlbmiss_save pushm r0-r3
+ #define tlbmiss_restore popm r0-r3
+
+- .section .tlbx.ex.text,"ax",@progbits
++ .org 0x50
+ .global itlb_miss
+ itlb_miss:
+ tlbmiss_save
+ rjmp tlb_miss_common
+
+- .section .tlbr.ex.text,"ax",@progbits
++ .org 0x60
+ dtlb_miss_read:
+ tlbmiss_save
+ rjmp tlb_miss_common
+
+- .section .tlbw.ex.text,"ax",@progbits
++ .org 0x70
+ dtlb_miss_write:
+ tlbmiss_save
+
+ .global tlb_miss_common
++ .align 2
+ tlb_miss_common:
+ mfsr r0, SYSREG_TLBEAR
+ mfsr r1, SYSREG_PTBR
+
+- /* Is it the vmalloc space? */
+- bld r0, 31
+- brcs handle_vmalloc_miss
+-
+- /* First level lookup */
++ /*
++ * First level lookup: The PGD contains virtual pointers to
++ * the second-level page tables, but they may be NULL if not
++ * present.
++ */
+ pgtbl_lookup:
+ lsr r2, r0, PGDIR_SHIFT
+ ld.w r3, r1[r2 << 2]
+ bfextu r1, r0, PAGE_SHIFT, PGDIR_SHIFT - PAGE_SHIFT
+- bld r3, _PAGE_BIT_PRESENT
+- brcc page_table_not_present
+-
+- /* Translate to virtual address in P1. */
+- andl r3, 0xf000
+- sbr r3, 31
++ cp.w r3, 0
++ breq page_table_not_present
+
+ /* Second level lookup */
+ ld.w r2, r3[r1 << 2]
+@@ -148,16 +139,55 @@
+ tlbmiss_restore
+ rete
+
+-handle_vmalloc_miss:
+- /* Simply do the lookup in init's page table */
++ /* The slow path of the TLB miss handler */
++ .align 2
++page_table_not_present:
++ /* Do we need to synchronize with swapper_pg_dir? */
++ bld r0, 31
++ brcs sync_with_swapper_pg_dir
++
++page_not_present:
++ tlbmiss_restore
++ sub sp, 4
++ stmts --sp, r0-lr
++ rcall save_full_context_ex
++ mfsr r12, SYSREG_ECR
++ mov r11, sp
++ rcall do_page_fault
++ rjmp ret_from_exception
++
++ .align 2
++sync_with_swapper_pg_dir:
++ /*
++ * If swapper_pg_dir contains a non-NULL second-level page
++ * table pointer, copy it into the current PGD. If not, we
++ * must handle it as a full-blown page fault.
++ *
++ * Jumping back to pgtbl_lookup causes an unnecessary lookup,
++ * but it is guaranteed to be a cache hit, it won't happen
++ * very often, and we absolutely do not want to sacrifice any
++ * performance in the fast path in order to improve this.
++ */
+ mov r1, lo(swapper_pg_dir)
+ orh r1, hi(swapper_pg_dir)
++ ld.w r3, r1[r2 << 2]
++ cp.w r3, 0
++ breq page_not_present
++ mfsr r1, SYSREG_PTBR
++ st.w r1[r2 << 2], r3
+ rjmp pgtbl_lookup
+
++ /*
++ * We currently have two bytes left at this point until we
++ * crash into the system call handler...
++ *
++ * Don't worry, the assembler will let us know.
++ */
++
+
+ /* --- System Call --- */
+
+- .section .scall.text,"ax",@progbits
++ .org 0x100
+ system_call:
+ #ifdef CONFIG_PREEMPT
+ mask_interrupts
+@@ -266,18 +296,6 @@
+ brcc syscall_exit_cont
+ rjmp enter_monitor_mode
+
+- /* The slow path of the TLB miss handler */
+-page_table_not_present:
+-page_not_present:
+- tlbmiss_restore
+- sub sp, 4
+- stmts --sp, r0-lr
+- rcall save_full_context_ex
+- mfsr r12, SYSREG_ECR
+- mov r11, sp
+- rcall do_page_fault
+- rjmp ret_from_exception
+-
+ /* This function expects to find offending PC in SYSREG_RAR_EX */
+ .type save_full_context_ex, @function
+ .align 2
+@@ -741,26 +759,6 @@
.section .irq.text,"ax",@progbits
@@ -4503,16 +4693,6 @@
.global irq_level0
.global irq_level1
.global irq_level2
---- a/arch/avr32/kernel/Makefile
-+++ b/arch/avr32/kernel/Makefile
-@@ -9,6 +9,7 @@
- obj-y += setup.o traps.o semaphore.o ocd.o ptrace.o
- obj-y += signal.o sys_avr32.o process.o time.o
- obj-y += init_task.o switch_to.o cpu.o
-+obj-y += dma-controller.o
- obj-$(CONFIG_MODULES) += module.o avr32_ksyms.o
- obj-$(CONFIG_KPROBES) += kprobes.o
- obj-$(CONFIG_STACKTRACE) += stacktrace.o
--- a/arch/avr32/kernel/process.c
+++ b/arch/avr32/kernel/process.c
@@ -18,11 +18,11 @@
@@ -4563,7 +4743,7 @@
--- a/arch/avr32/kernel/time.c
+++ b/arch/avr32/kernel/time.c
-@@ -1,16 +1,12 @@
+@@ -1,233 +1,147 @@
/*
* Copyright (C) 2004-2007 Atmel Corporation
*
@@ -4577,13 +4757,25 @@
-
#include <linux/clk.h>
-#include <linux/clocksource.h>
+-#include <linux/time.h>
+-#include <linux/module.h>
+#include <linux/clockchips.h>
- #include <linux/time.h>
- #include <linux/module.h>
++#include <linux/init.h>
#include <linux/interrupt.h>
-@@ -27,207 +23,133 @@
- #include <asm/io.h>
- #include <asm/sections.h>
+ #include <linux/irq.h>
+-#include <linux/kernel_stat.h>
+-#include <linux/errno.h>
+-#include <linux/init.h>
+-#include <linux/profile.h>
+-#include <linux/sysdev.h>
+-#include <linux/err.h>
++#include <linux/kernel.h>
++#include <linux/time.h>
+
+-#include <asm/div64.h>
+ #include <asm/sysreg.h>
+-#include <asm/io.h>
+-#include <asm/sections.h>
-/* how many counter cycles in a jiffy? */
-static u32 cycles_per_jiffy;
@@ -4629,20 +4821,20 @@
- * By default we provide the null RTC ops
- */
-static unsigned long null_rtc_get_time(void)
-+static irqreturn_t timer_interrupt(int irq, void *dev_id)
- {
+-{
- return mktime(2007, 1, 1, 0, 0, 0);
-}
-
-static int null_rtc_set_time(unsigned long sec)
--{
++static irqreturn_t timer_interrupt(int irq, void *dev_id)
+ {
- return 0;
-}
-+ struct clock_event_device *evdev = dev_id;
-
+-
-static unsigned long (*rtc_get_time)(void) = null_rtc_get_time;
-static int (*rtc_set_time)(unsigned long) = null_rtc_set_time;
--
++ struct clock_event_device *evdev = dev_id;
+
-static void avr32_timer_ack(void)
-{
- u32 count;
@@ -4873,6 +5065,34 @@
}
-
-device_initcall(init_timer_sysfs);
+--- a/arch/avr32/kernel/vmlinux.lds.S
++++ b/arch/avr32/kernel/vmlinux.lds.S
+@@ -68,14 +68,6 @@
+ _evba = .;
+ _text = .;
+ *(.ex.text)
+- . = 0x50;
+- *(.tlbx.ex.text)
+- . = 0x60;
+- *(.tlbr.ex.text)
+- . = 0x70;
+- *(.tlbw.ex.text)
+- . = 0x100;
+- *(.scall.text)
+ *(.irq.text)
+ KPROBES_TEXT
+ TEXT_TEXT
+@@ -107,6 +99,10 @@
+ */
+ *(.data.init_task)
+
++ /* Then, the page-aligned data */
++ . = ALIGN(PAGE_SIZE);
++ *(.data.page_aligned)
++
+ /* Then, the cacheline aligned data */
+ . = ALIGN(L1_CACHE_BYTES);
+ *(.data.cacheline_aligned)
--- a/arch/avr32/lib/io-readsb.S
+++ b/arch/avr32/lib/io-readsb.S
@@ -41,7 +41,7 @@
@@ -4884,6 +5104,96 @@
sub r10, 1
st.b r11++, r8
brne 3b
+--- a/arch/avr32/mach-at32ap/Kconfig
++++ b/arch/avr32/mach-at32ap/Kconfig
+@@ -26,6 +26,13 @@
+
+ endchoice
+
++config GPIO_DEV
++ bool "GPIO /dev interface"
++ select CONFIGFS_FS
++ default n
++ help
++ Say `Y' to enable a /dev interface to the GPIO pins.
++
+ endmenu
+
+ endif # PLATFORM_AT32AP
+--- a/arch/avr32/mach-at32ap/Makefile
++++ b/arch/avr32/mach-at32ap/Makefile
+@@ -1,4 +1,9 @@
+-obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
+-obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o
+-obj-$(CONFIG_CPU_AT32AP700X) += time-tc.o
++obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o
++obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o
+ obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
++obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
++obj-$(CONFIG_PM) += pm.o
++
++ifeq ($(CONFIG_PM_DEBUG),y)
++CFLAGS_pm.o += -DDEBUG
++endif
+--- a/arch/avr32/mach-at32ap/at32ap.c
++++ /dev/null
+@@ -1,56 +0,0 @@
+-/*
+- * Copyright (C) 2006 Atmel Corporation
+- *
+- * This program is free software; you can redistribute it and/or modify
+- * it under the terms of the GNU General Public License version 2 as
+- * published by the Free Software Foundation.
+- */
+-
+-#include <linux/clk.h>
+-#include <linux/err.h>
+-#include <linux/init.h>
+-#include <linux/platform_device.h>
+-
+-#include <asm/arch/init.h>
+-
+-void __init setup_platform(void)
+-{
+- at32_clock_init();
+- at32_portmux_init();
+-}
+-
+-static int __init pdc_probe(struct platform_device *pdev)
+-{
+- struct clk *pclk, *hclk;
+-
+- pclk = clk_get(&pdev->dev, "pclk");
+- if (IS_ERR(pclk)) {
+- dev_err(&pdev->dev, "no pclk defined\n");
+- return PTR_ERR(pclk);
+- }
+- hclk = clk_get(&pdev->dev, "hclk");
+- if (IS_ERR(hclk)) {
+- dev_err(&pdev->dev, "no hclk defined\n");
+- clk_put(pclk);
+- return PTR_ERR(hclk);
+- }
+-
+- clk_enable(pclk);
+- clk_enable(hclk);
+-
+- dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n");
+- return 0;
+-}
+-
+-static struct platform_driver pdc_driver = {
+- .probe = pdc_probe,
+- .driver = {
+- .name = "pdc",
+- },
+-};
+-
+-static int __init pdc_init(void)
+-{
+- return platform_driver_register(&pdc_driver);
+-}
+-arch_initcall(pdc_init);
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -6,11 +6,13 @@
@@ -5149,8 +5459,7 @@
- .num_resources = ARRAY_SIZE(at32_systc0_resource),
+ .resource = at32_tcb0_resource,
+ .num_resources = ARRAY_SIZE(at32_tcb0_resource),
- };
--DEV_CLK(pclk, at32_systc0, pbb, 3);
++};
+DEV_CLK(t0_clk, at32_tcb0, pbb, 3);
+
+static struct resource at32_tcb1_resource[] = {
@@ -5162,7 +5471,8 @@
+ .id = 1,
+ .resource = at32_tcb1_resource,
+ .num_resources = ARRAY_SIZE(at32_tcb1_resource),
-+};
+ };
+-DEV_CLK(pclk, at32_systc0, pbb, 3);
+DEV_CLK(t0_clk, at32_tcb1, pbb, 4);
/* --------------------------------------------------------------------
@@ -5259,7 +5569,27 @@
* USART
* -------------------------------------------------------------------- */
-@@ -989,7 +1228,9 @@
+@@ -951,7 +1190,8 @@
+ switch (id) {
+ case 0:
+ pdev = &atmel_spi0_device;
+- select_peripheral(PA(0), PERIPH_A, 0); /* MISO */
++ /* pullup MISO so a level is always defined */
++ select_peripheral(PA(0), PERIPH_A, AT32_GPIOF_PULLUP);
+ select_peripheral(PA(1), PERIPH_A, 0); /* MOSI */
+ select_peripheral(PA(2), PERIPH_A, 0); /* SCK */
+ at32_spi_setup_slaves(0, b, n, spi0_pins);
+@@ -959,7 +1199,8 @@
+
+ case 1:
+ pdev = &atmel_spi1_device;
+- select_peripheral(PB(0), PERIPH_B, 0); /* MISO */
++ /* pullup MISO so a level is always defined */
++ select_peripheral(PB(0), PERIPH_B, AT32_GPIOF_PULLUP);
+ select_peripheral(PB(1), PERIPH_B, 0); /* MOSI */
+ select_peripheral(PB(5), PERIPH_B, 0); /* SCK */
+ at32_spi_setup_slaves(1, b, n, spi1_pins);
+@@ -989,7 +1230,9 @@
.index = 2,
};
@@ -5270,7 +5600,7 @@
{
struct platform_device *pdev;
-@@ -1009,6 +1250,9 @@
+@@ -1009,6 +1252,9 @@
atmel_twi0_pclk.dev = &pdev->dev;
@@ -5280,7 +5610,7 @@
platform_device_add(pdev);
return pdev;
-@@ -1032,7 +1276,8 @@
+@@ -1032,7 +1278,8 @@
.index = 9,
};
@@ -5290,7 +5620,7 @@
{
struct platform_device *pdev;
-@@ -1041,11 +1286,15 @@
+@@ -1041,11 +1288,15 @@
pdev = platform_device_alloc("atmel_mci", id);
if (!pdev)
@@ -5308,7 +5638,7 @@
select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
-@@ -1054,12 +1303,19 @@
+@@ -1054,12 +1305,19 @@
select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
@@ -5329,7 +5659,7 @@
platform_device_put(pdev);
return NULL;
}
-@@ -1097,7 +1353,8 @@
+@@ -1097,7 +1355,8 @@
struct platform_device *__init
at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
@@ -5339,7 +5669,7 @@
{
struct platform_device *pdev;
struct atmel_lcdfb_info *info;
-@@ -1124,37 +1381,77 @@
+@@ -1124,37 +1383,77 @@
switch (id) {
case 0:
pdev = &atmel_lcdfb0_device;
@@ -5448,7 +5778,7 @@
clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));
-@@ -1351,9 +1648,39 @@
+@@ -1351,9 +1650,39 @@
.index = 6,
};
@@ -5488,7 +5818,7 @@
struct platform_device *pdev;
if (id != 0)
-@@ -1367,13 +1694,20 @@
+@@ -1367,13 +1696,20 @@
ARRAY_SIZE(usba0_resource)))
goto out_free_pdev;
@@ -5515,7 +5845,7 @@
usba0_pclk.dev = &pdev->dev;
usba0_hclk.dev = &pdev->dev;
-@@ -1526,6 +1860,58 @@
+@@ -1526,6 +1862,58 @@
#endif
/* --------------------------------------------------------------------
@@ -5574,7 +5904,64 @@
* AC97C
* -------------------------------------------------------------------- */
static struct resource atmel_ac97c0_resource[] __initdata = {
-@@ -1683,6 +2069,7 @@
+@@ -1540,9 +1928,11 @@
+ .index = 10,
+ };
+
+-struct platform_device *__init at32_add_device_ac97c(unsigned int id)
++struct platform_device *__init
++at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data)
+ {
+ struct platform_device *pdev;
++ struct ac97c_platform_data _data;
+
+ if (id != 0)
+ return NULL;
+@@ -1553,19 +1943,37 @@
+
+ if (platform_device_add_resources(pdev, atmel_ac97c0_resource,
+ ARRAY_SIZE(atmel_ac97c0_resource)))
+- goto err_add_resources;
++ goto fail;
+
+- select_peripheral(PB(20), PERIPH_B, 0); /* SYNC */
+- select_peripheral(PB(21), PERIPH_B, 0); /* SDO */
+- select_peripheral(PB(22), PERIPH_B, 0); /* SDI */
+- select_peripheral(PB(23), PERIPH_B, 0); /* SCLK */
++ if (!data) {
++ data = &_data;
++ memset(data, 0, sizeof(struct ac97c_platform_data));
++ data->reset_pin = GPIO_PIN_NONE;
++ }
++
++ data->dma_rx_periph_id = 3;
++ data->dma_tx_periph_id = 4;
++ data->dma_controller_id = 0;
++
++ if (platform_device_add_data(pdev, data,
++ sizeof(struct ac97c_platform_data)))
++ goto fail;
++
++ select_peripheral(PB(20), PERIPH_B, 0); /* SDO */
++ select_peripheral(PB(21), PERIPH_B, 0); /* SYNC */
++ select_peripheral(PB(22), PERIPH_B, 0); /* SCLK */
++ select_peripheral(PB(23), PERIPH_B, 0); /* SDI */
++
++ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
++ if (data->reset_pin != GPIO_PIN_NONE)
++ at32_select_gpio(data->reset_pin, 0);
+
+ atmel_ac97c0_pclk.dev = &pdev->dev;
+
+ platform_device_add(pdev);
+ return pdev;
+
+-err_add_resources:
++fail:
+ platform_device_put(pdev);
+ return NULL;
+ }
+@@ -1683,6 +2091,7 @@
&hmatrix_clk,
&ebi_clk,
&hramc_clk,
@@ -5582,7 +5969,7 @@
&smc0_pclk,
&smc0_mck,
&pdc_hclk,
-@@ -1694,7 +2081,10 @@
+@@ -1694,7 +2103,10 @@
&pio2_mck,
&pio3_mck,
&pio4_mck,
@@ -5594,7 +5981,7 @@
&atmel_usart0_usart,
&atmel_usart1_usart,
&atmel_usart2_usart,
-@@ -1730,16 +2120,7 @@
+@@ -1730,16 +2142,7 @@
};
unsigned int at32_nr_clocks = ARRAY_SIZE(at32_clock_list);
@@ -5612,7 +5999,7 @@
{
u32 cpu_mask = 0, hsb_mask = 0, pba_mask = 0, pbb_mask = 0;
int i;
-@@ -1794,4 +2175,36 @@
+@@ -1794,4 +2197,36 @@
pm_writel(HSB_MASK, hsb_mask);
pm_writel(PBA_MASK, pba_mask);
pm_writel(PBB_MASK, pbb_mask);
@@ -5649,65 +6036,6 @@
+ return -ENOMEM;
}
+core_initcall(sram_init);
---- a/arch/avr32/mach-at32ap/at32ap.c
-+++ /dev/null
-@@ -1,56 +0,0 @@
--/*
-- * Copyright (C) 2006 Atmel Corporation
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/clk.h>
--#include <linux/err.h>
--#include <linux/init.h>
--#include <linux/platform_device.h>
--
--#include <asm/arch/init.h>
--
--void __init setup_platform(void)
--{
-- at32_clock_init();
-- at32_portmux_init();
--}
--
--static int __init pdc_probe(struct platform_device *pdev)
--{
-- struct clk *pclk, *hclk;
--
-- pclk = clk_get(&pdev->dev, "pclk");
-- if (IS_ERR(pclk)) {
-- dev_err(&pdev->dev, "no pclk defined\n");
-- return PTR_ERR(pclk);
-- }
-- hclk = clk_get(&pdev->dev, "hclk");
-- if (IS_ERR(hclk)) {
-- dev_err(&pdev->dev, "no hclk defined\n");
-- clk_put(pclk);
-- return PTR_ERR(hclk);
-- }
--
-- clk_enable(pclk);
-- clk_enable(hclk);
--
-- dev_info(&pdev->dev, "Atmel Peripheral DMA Controller enabled\n");
-- return 0;
--}
--
--static struct platform_driver pdc_driver = {
-- .probe = pdc_probe,
-- .driver = {
-- .name = "pdc",
-- },
--};
--
--static int __init pdc_init(void)
--{
-- return platform_driver_register(&pdc_driver);
--}
--arch_initcall(pdc_init);
--- a/arch/avr32/mach-at32ap/cpufreq.c
+++ b/arch/avr32/mach-at32ap/cpufreq.c
@@ -108,5 +108,4 @@
@@ -6409,37 +6737,6 @@
unsigned long intc_get_pending(unsigned int group)
{
return intc_readl(&intc0, INTREQ0 + 4 * group);
---- a/arch/avr32/mach-at32ap/Kconfig
-+++ b/arch/avr32/mach-at32ap/Kconfig
-@@ -26,6 +26,13 @@
-
- endchoice
-
-+config GPIO_DEV
-+ bool "GPIO /dev interface"
-+ select CONFIGFS_FS
-+ default n
-+ help
-+ Say `Y' to enable a /dev interface to the GPIO pins.
-+
- endmenu
-
- endif # PLATFORM_AT32AP
---- a/arch/avr32/mach-at32ap/Makefile
-+++ b/arch/avr32/mach-at32ap/Makefile
-@@ -1,4 +1,9 @@
--obj-y += at32ap.o clock.o intc.o extint.o pio.o hsmc.o
--obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o
--obj-$(CONFIG_CPU_AT32AP700X) += time-tc.o
-+obj-y += pdc.o clock.o intc.o extint.o pio.o hsmc.o
-+obj-$(CONFIG_CPU_AT32AP700X) += at32ap700x.o pm-at32ap700x.o
- obj-$(CONFIG_CPU_FREQ_AT32AP) += cpufreq.o
-+obj-$(CONFIG_GPIO_DEV) += gpio-dev.o
-+obj-$(CONFIG_PM) += pm.o
-+
-+ifeq ($(CONFIG_PM_DEBUG),y)
-+CFLAGS_pm.o += -DDEBUG
-+endif
--- /dev/null
+++ b/arch/avr32/mach-at32ap/pdc.c
@@ -0,0 +1,48 @@
@@ -6585,6 +6882,17 @@
if (!label)
continue;
+--- a/arch/avr32/mach-at32ap/pio.h
++++ b/arch/avr32/mach-at32ap/pio.h
+@@ -57,7 +57,7 @@
+
+ /* Bitfields in IFDR */
+
+-/* Bitfields in ISFR */
++/* Bitfields in IFSR */
+
+ /* Bitfields in SODR */
+
--- /dev/null
+++ b/arch/avr32/mach-at32ap/pm-at32ap700x.S
@@ -0,0 +1,174 @@
@@ -7310,16 +7618,6 @@
-
- return IRQ_NONE;
-}
---- a/arch/avr32/Makefile
-+++ b/arch/avr32/Makefile
-@@ -32,6 +32,7 @@
- core-y += arch/avr32/kernel/
- core-y += arch/avr32/mm/
- drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
-+drivers-y += arch/avr32/drivers/
- libs-y += arch/avr32/lib/
-
- archincdir-$(CONFIG_PLATFORM_AT32AP) := arch-at32ap
--- a/arch/avr32/mm/init.c
+++ b/arch/avr32/mm/init.c
@@ -11,6 +11,7 @@
@@ -7330,8 +7628,16 @@
#include <linux/bootmem.h>
#include <linux/pagemap.h>
#include <linux/nodemask.h>
-@@ -28,15 +29,13 @@
- pgd_t swapper_pg_dir[PTRS_PER_PGD];
+@@ -23,20 +24,20 @@
+ #include <asm/setup.h>
+ #include <asm/sections.h>
+
++#define __page_aligned __attribute__((section(".data.page_aligned")))
++
+ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
+
+-pgd_t swapper_pg_dir[PTRS_PER_PGD];
++pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned;
struct page *empty_zero_page;
+EXPORT_SYMBOL(empty_zero_page);
@@ -7347,6 +7653,359 @@
void show_mem(void)
{
int total = 0, reserved = 0, cached = 0;
+@@ -109,19 +110,9 @@
+ zero_page = alloc_bootmem_low_pages_node(NODE_DATA(0),
+ PAGE_SIZE);
+
+- {
+- pgd_t *pg_dir;
+- int i;
+-
+- pg_dir = swapper_pg_dir;
+- sysreg_write(PTBR, (unsigned long)pg_dir);
+-
+- for (i = 0; i < PTRS_PER_PGD; i++)
+- pgd_val(pg_dir[i]) = 0;
+-
+- enable_mmu();
+- printk ("CPU: Paging enabled\n");
+- }
++ sysreg_write(PTBR, (unsigned long)swapper_pg_dir);
++ enable_mmu();
++ printk ("CPU: Paging enabled\n");
+
+ for_each_online_node(nid) {
+ pg_data_t *pgdat = NODE_DATA(nid);
+--- a/arch/avr32/mm/tlb.c
++++ b/arch/avr32/mm/tlb.c
+@@ -11,21 +11,21 @@
+
+ #include <asm/mmu_context.h>
+
+-#define _TLBEHI_I 0x100
++/* TODO: Get the correct number from the CONFIG1 system register */
++#define NR_TLB_ENTRIES 32
+
+-void show_dtlb_entry(unsigned int index)
++static void show_dtlb_entry(unsigned int index)
+ {
+- unsigned int tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
++ u32 tlbehi, tlbehi_save, tlbelo, mmucr, mmucr_save;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ mmucr_save = sysreg_read(MMUCR);
+ tlbehi_save = sysreg_read(TLBEHI);
+- mmucr = mmucr_save & 0x13;
+- mmucr |= index << 14;
++ mmucr = SYSREG_BFINS(DRP, index, mmucr_save);
+ sysreg_write(MMUCR, mmucr);
+
+- asm volatile("tlbr" : : : "memory");
++ __builtin_tlbr();
+ cpu_sync_pipeline();
+
+ tlbehi = sysreg_read(TLBEHI);
+@@ -33,15 +33,17 @@
+
+ printk("%2u: %c %c %02x %05x %05x %o %o %c %c %c %c\n",
+ index,
+- (tlbehi & 0x200)?'1':'0',
+- (tlbelo & 0x100)?'1':'0',
+- (tlbehi & 0xff),
+- (tlbehi >> 12), (tlbelo >> 12),
+- (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
+- (tlbelo & 0x200)?'1':'0',
+- (tlbelo & 0x080)?'1':'0',
+- (tlbelo & 0x001)?'1':'0',
+- (tlbelo & 0x002)?'1':'0');
++ SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
++ SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
++ SYSREG_BFEXT(ASID, tlbehi),
++ SYSREG_BFEXT(VPN, tlbehi) >> 2,
++ SYSREG_BFEXT(PFN, tlbelo) >> 2,
++ SYSREG_BFEXT(AP, tlbelo),
++ SYSREG_BFEXT(SZ, tlbelo),
++ SYSREG_BFEXT(TLBELO_C, tlbelo) ? 'C' : ' ',
++ SYSREG_BFEXT(B, tlbelo) ? 'B' : ' ',
++ SYSREG_BFEXT(W, tlbelo) ? 'W' : ' ',
++ SYSREG_BFEXT(TLBELO_D, tlbelo) ? 'D' : ' ');
+
+ sysreg_write(MMUCR, mmucr_save);
+ sysreg_write(TLBEHI, tlbehi_save);
+@@ -54,29 +56,33 @@
+ unsigned int i;
+
+ printk("ID V G ASID VPN PFN AP SZ C B W D\n");
+- for (i = 0; i < 32; i++)
++ for (i = 0; i < NR_TLB_ENTRIES; i++)
+ show_dtlb_entry(i);
+ }
+
+-static unsigned long last_mmucr;
+-
+-static inline void set_replacement_pointer(unsigned shift)
++static void update_dtlb(unsigned long address, pte_t pte)
+ {
+- unsigned long mmucr, mmucr_save;
++ u32 tlbehi;
++ u32 mmucr;
+
+- mmucr = mmucr_save = sysreg_read(MMUCR);
++ /*
++ * We're not changing the ASID here, so no need to flush the
++ * pipeline.
++ */
++ tlbehi = sysreg_read(TLBEHI);
++ tlbehi = SYSREG_BF(ASID, SYSREG_BFEXT(ASID, tlbehi));
++ tlbehi |= address & MMU_VPN_MASK;
++ tlbehi |= SYSREG_BIT(TLBEHI_V);
++ sysreg_write(TLBEHI, tlbehi);
+
+ /* Does this mapping already exist? */
+- __asm__ __volatile__(
+- " tlbs\n"
+- " mfsr %0, %1"
+- : "=r"(mmucr)
+- : "i"(SYSREG_MMUCR));
++ __builtin_tlbs();
++ mmucr = sysreg_read(MMUCR);
+
+ if (mmucr & SYSREG_BIT(MMUCR_N)) {
+ /* Not found -- pick a not-recently-accessed entry */
+- unsigned long rp;
+- unsigned long tlbar = sysreg_read(TLBARLO);
++ unsigned int rp;
++ u32 tlbar = sysreg_read(TLBARLO);
+
+ rp = 32 - fls(tlbar);
+ if (rp == 32) {
+@@ -84,30 +90,14 @@
+ sysreg_write(TLBARLO, -1L);
+ }
+
+- mmucr &= 0x13;
+- mmucr |= (rp << shift);
+-
++ mmucr = SYSREG_BFINS(DRP, rp, mmucr);
+ sysreg_write(MMUCR, mmucr);
+ }
+
+- last_mmucr = mmucr;
+-}
+-
+-static void update_dtlb(unsigned long address, pte_t pte, unsigned long asid)
+-{
+- unsigned long vpn;
+-
+- vpn = (address & MMU_VPN_MASK) | _TLBEHI_VALID | asid;
+- sysreg_write(TLBEHI, vpn);
+- cpu_sync_pipeline();
+-
+- set_replacement_pointer(14);
+-
+ sysreg_write(TLBELO, pte_val(pte) & _PAGE_FLAGS_HARDWARE_MASK);
+
+ /* Let's go */
+- asm volatile("nop\n\ttlbw" : : : "memory");
+- cpu_sync_pipeline();
++ __builtin_tlbw();
+ }
+
+ void update_mmu_cache(struct vm_area_struct *vma,
+@@ -120,39 +110,40 @@
+ return;
+
+ local_irq_save(flags);
+- update_dtlb(address, pte, get_asid());
++ update_dtlb(address, pte);
+ local_irq_restore(flags);
+ }
+
+-void __flush_tlb_page(unsigned long asid, unsigned long page)
++static void __flush_tlb_page(unsigned long asid, unsigned long page)
+ {
+- unsigned long mmucr, tlbehi;
++ u32 mmucr, tlbehi;
+
+- page |= asid;
+- sysreg_write(TLBEHI, page);
+- cpu_sync_pipeline();
+- asm volatile("tlbs");
++ /*
++ * Caller is responsible for masking out non-PFN bits in page
++ * and changing the current ASID if necessary. This means that
++ * we don't need to flush the pipeline after writing TLBEHI.
++ */
++ tlbehi = page | asid;
++ sysreg_write(TLBEHI, tlbehi);
++
++ __builtin_tlbs();
+ mmucr = sysreg_read(MMUCR);
+
+ if (!(mmucr & SYSREG_BIT(MMUCR_N))) {
+- unsigned long tlbarlo;
+- unsigned long entry;
++ unsigned int entry;
++ u32 tlbarlo;
+
+ /* Clear the "valid" bit */
+- tlbehi = sysreg_read(TLBEHI);
+- tlbehi &= ~_TLBEHI_VALID;
+ sysreg_write(TLBEHI, tlbehi);
+- cpu_sync_pipeline();
+
+ /* mark the entry as "not accessed" */
+- entry = (mmucr >> 14) & 0x3f;
++ entry = SYSREG_BFEXT(DRP, mmucr);
+ tlbarlo = sysreg_read(TLBARLO);
+- tlbarlo |= (0x80000000 >> entry);
++ tlbarlo |= (0x80000000UL >> entry);
+ sysreg_write(TLBARLO, tlbarlo);
+
+ /* update the entry with valid bit clear */
+- asm volatile("tlbw");
+- cpu_sync_pipeline();
++ __builtin_tlbw();
+ }
+ }
+
+@@ -190,17 +181,22 @@
+
+ local_irq_save(flags);
+ size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
++
+ if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
+ mm->context = NO_CONTEXT;
+ if (mm == current->mm)
+ activate_context(mm);
+ } else {
+- unsigned long asid = mm->context & MMU_CONTEXT_ASID_MASK;
+- unsigned long saved_asid = MMU_NO_ASID;
++ unsigned long asid;
++ unsigned long saved_asid;
++
++ asid = mm->context & MMU_CONTEXT_ASID_MASK;
++ saved_asid = MMU_NO_ASID;
+
+ start &= PAGE_MASK;
+ end += (PAGE_SIZE - 1);
+ end &= PAGE_MASK;
++
+ if (mm != current->mm) {
+ saved_asid = get_asid();
+ set_asid(asid);
+@@ -218,33 +214,34 @@
+ }
+
+ /*
+- * TODO: If this is only called for addresses > TASK_SIZE, we can probably
+- * skip the ASID stuff and just use the Global bit...
++ * This function depends on the pages to be flushed having the G
++ * (global) bit set in their pte. This is true for all
++ * PAGE_KERNEL(_RO) pages.
+ */
+ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+ {
+ unsigned long flags;
+ int size;
+
+- local_irq_save(flags);
+ size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
+ if (size > (MMU_DTLB_ENTRIES / 4)) { /* Too many entries to flush */
+ flush_tlb_all();
+ } else {
+- unsigned long asid = init_mm.context & MMU_CONTEXT_ASID_MASK;
+- unsigned long saved_asid = get_asid();
++ unsigned long asid;
++
++ local_irq_save(flags);
++ asid = get_asid();
+
+ start &= PAGE_MASK;
+ end += (PAGE_SIZE - 1);
+ end &= PAGE_MASK;
+- set_asid(asid);
++
+ while (start < end) {
+ __flush_tlb_page(asid, start);
+ start += PAGE_SIZE;
+ }
+- set_asid(saved_asid);
++ local_irq_restore(flags);
+ }
+- local_irq_restore(flags);
+ }
+
+ void flush_tlb_mm(struct mm_struct *mm)
+@@ -280,7 +277,7 @@
+ {
+ static unsigned long tlb_index;
+
+- if (*pos >= 32)
++ if (*pos >= NR_TLB_ENTRIES)
+ return NULL;
+
+ tlb_index = 0;
+@@ -291,7 +288,7 @@
+ {
+ unsigned long *index = v;
+
+- if (*index >= 31)
++ if (*index >= NR_TLB_ENTRIES - 1)
+ return NULL;
+
+ ++*pos;
+@@ -313,16 +310,16 @@
+ if (*index == 0)
+ seq_puts(tlb, "ID V G ASID VPN PFN AP SZ C B W D\n");
+
+- BUG_ON(*index >= 32);
++ BUG_ON(*index >= NR_TLB_ENTRIES);
+
+ local_irq_save(flags);
+ mmucr_save = sysreg_read(MMUCR);
+ tlbehi_save = sysreg_read(TLBEHI);
+- mmucr = mmucr_save & 0x13;
+- mmucr |= *index << 14;
++ mmucr = SYSREG_BFINS(DRP, *index, mmucr_save);
+ sysreg_write(MMUCR, mmucr);
+
+- asm volatile("tlbr" : : : "memory");
++ /* TLBR might change the ASID */
++ __builtin_tlbr();
+ cpu_sync_pipeline();
+
+ tlbehi = sysreg_read(TLBEHI);
+@@ -334,16 +331,18 @@
+ local_irq_restore(flags);
+
+ seq_printf(tlb, "%2lu: %c %c %02x %05x %05x %o %o %c %c %c %c\n",
+- *index,
+- (tlbehi & 0x200)?'1':'0',
+- (tlbelo & 0x100)?'1':'0',
+- (tlbehi & 0xff),
+- (tlbehi >> 12), (tlbelo >> 12),
+- (tlbelo >> 4) & 7, (tlbelo >> 2) & 3,
+- (tlbelo & 0x200)?'1':'0',
+- (tlbelo & 0x080)?'1':'0',
+- (tlbelo & 0x001)?'1':'0',
+- (tlbelo & 0x002)?'1':'0');
++ *index,
++ SYSREG_BFEXT(TLBEHI_V, tlbehi) ? '1' : '0',
++ SYSREG_BFEXT(G, tlbelo) ? '1' : '0',
++ SYSREG_BFEXT(ASID, tlbehi),
++ SYSREG_BFEXT(VPN, tlbehi) >> 2,
++ SYSREG_BFEXT(PFN, tlbelo) >> 2,
++ SYSREG_BFEXT(AP, tlbelo),
++ SYSREG_BFEXT(SZ, tlbelo),
++ SYSREG_BFEXT(TLBELO_C, tlbelo) ? '1' : '0',
++ SYSREG_BFEXT(B, tlbelo) ? '1' : '0',
++ SYSREG_BFEXT(W, tlbelo) ? '1' : '0',
++ SYSREG_BFEXT(TLBELO_D, tlbelo) ? '1' : '0');
+
+ return 0;
+ }
--- a/arch/avr32/oprofile/op_model_avr32.c
+++ b/arch/avr32/oprofile/op_model_avr32.c
@@ -16,7 +16,6 @@
@@ -7701,6 +8360,33 @@
+ return 0;
+}
+arch_initcall(tcb_clksrc_init);
+--- a/drivers/i2c/busses/Kconfig
++++ b/drivers/i2c/busses/Kconfig
+@@ -88,6 +88,14 @@
+ to support combined I2C messages. Use the i2c-gpio driver
+ unless your system can cope with those limitations.
+
++config I2C_ATMELTWI
++ tristate "Atmel Two-Wire Interface (TWI)"
++ depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
++ help
++ Atmel on-chip TWI controller. Say Y if you have an AT32 or
++ AT91-based device and want to use its built-in TWI
++ functionality.
++
+ config I2C_AU1550
+ tristate "Au1550/Au1200 SMBus interface"
+ depends on SOC_AU1550 || SOC_AU1200
+--- a/drivers/i2c/busses/Makefile
++++ b/drivers/i2c/busses/Makefile
+@@ -52,6 +52,7 @@
+ obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
+ obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
+ obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
++obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
+
+ ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
+ EXTRA_CFLAGS += -DDEBUG
--- /dev/null
+++ b/drivers/i2c/busses/i2c-atmeltwi.c
@@ -0,0 +1,436 @@
@@ -8260,33 +8946,36 @@
+ __raw_writel((value), (port)->regs + TWI_##reg)
+
+#endif /* __ATMELTWI_H__ */
---- a/drivers/i2c/busses/Kconfig
-+++ b/drivers/i2c/busses/Kconfig
-@@ -88,6 +88,14 @@
- to support combined I2C messages. Use the i2c-gpio driver
- unless your system can cope with those limitations.
+--- a/drivers/input/serio/Kconfig
++++ b/drivers/input/serio/Kconfig
+@@ -88,6 +88,17 @@
+ To compile this driver as a module, choose M here: the
+ module will be called rpckbd.
-+config I2C_ATMELTWI
-+ tristate "Atmel Two-Wire Interface (TWI)"
-+ depends on I2C && (ARCH_AT91 || PLATFORM_AT32AP)
++config SERIO_AT32PSIF
++ tristate "AVR32 PSIF PS/2 keyboard and mouse controller"
++ depends on AVR32
++ default n
+ help
-+ Atmel on-chip TWI controller. Say Y if you have an AT32 or
-+ AT91-based device and want to use its built-in TWI
-+ functionality.
++ Say Y here if you want to use the PSIF peripheral on AVR32 devices
++ and connect a PS/2 keyboard and/or mouse to it.
+
- config I2C_AU1550
- tristate "Au1550/Au1200 SMBus interface"
- depends on SOC_AU1550 || SOC_AU1200
---- a/drivers/i2c/busses/Makefile
-+++ b/drivers/i2c/busses/Makefile
-@@ -52,6 +52,7 @@
- obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o
- obj-$(CONFIG_SCx200_ACB) += scx200_acb.o
- obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o
-+obj-$(CONFIG_I2C_ATMELTWI) += i2c-atmeltwi.o
-
- ifeq ($(CONFIG_I2C_DEBUG_BUS),y)
- EXTRA_CFLAGS += -DDEBUG
++ To compile this driver as a module, choose M here: the module will
++ be called at32psif.
++
+ config SERIO_AMBAKMI
+ tristate "AMBA KMI keyboard controller"
+ depends on ARM_AMBA
+--- a/drivers/input/serio/Makefile
++++ b/drivers/input/serio/Makefile
+@@ -12,6 +12,7 @@
+ obj-$(CONFIG_SERIO_RPCKBD) += rpckbd.o
+ obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o
+ obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o
++obj-$(CONFIG_SERIO_AT32PSIF) += at32psif.o
+ obj-$(CONFIG_SERIO_Q40KBD) += q40kbd.o
+ obj-$(CONFIG_SERIO_GSCPS2) += gscps2.o
+ obj-$(CONFIG_HP_SDC) += hp_sdc.o
--- /dev/null
+++ b/drivers/input/serio/at32psif.c
@@ -0,0 +1,351 @@
@@ -8726,36 +9415,58 @@
+ __raw_writel((value), (port)->regs + PSIF_##reg)
+
+#endif /* _AT32PSIF_H */
---- a/drivers/input/serio/Kconfig
-+++ b/drivers/input/serio/Kconfig
-@@ -88,6 +88,17 @@
- To compile this driver as a module, choose M here: the
- module will be called rpckbd.
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -22,6 +22,39 @@
+ purposes including software controlled power-efficent backlights
+ on LCD displays, motor control, and waveform generation.
-+config SERIO_AT32PSIF
-+ tristate "AVR32 PSIF PS/2 keyboard and mouse controller"
-+ depends on AVR32
-+ default n
++config ATMEL_TCLIB
++ bool "Atmel AT32/AT91 Timer/Counter Library"
++ depends on (AVR32 || ARCH_AT91)
+ help
-+ Say Y here if you want to use the PSIF peripheral on AVR32 devices
-+ and connect a PS/2 keyboard and/or mouse to it.
++ Select this if you want a library to allocate the Timer/Counter
++ blocks found on many Atmel processors. This facilitates using
++ these blocks by different drivers despite processor differences.
+
-+ To compile this driver as a module, choose M here: the module will
-+ be called at32psif.
++config ATMEL_TCB_CLKSRC
++ bool "TC Block Clocksource"
++ depends on ATMEL_TCLIB && GENERIC_TIME
++ default y
++ help
++ Select this to get a high precision clocksource based on a
++ TC block with a 5+ MHz base clock rate. Two timer channels
++ are combined to make a single 32-bit timer.
+
- config SERIO_AMBAKMI
- tristate "AMBA KMI keyboard controller"
- depends on ARM_AMBA
---- a/drivers/input/serio/Makefile
-+++ b/drivers/input/serio/Makefile
-@@ -12,6 +12,7 @@
- obj-$(CONFIG_SERIO_RPCKBD) += rpckbd.o
- obj-$(CONFIG_SERIO_SA1111) += sa1111ps2.o
- obj-$(CONFIG_SERIO_AMBAKMI) += ambakmi.o
-+obj-$(CONFIG_SERIO_AT32PSIF) += at32psif.o
- obj-$(CONFIG_SERIO_Q40KBD) += q40kbd.o
- obj-$(CONFIG_SERIO_GSCPS2) += gscps2.o
- obj-$(CONFIG_HP_SDC) += hp_sdc.o
++ When GENERIC_CLOCKEVENTS is defined, the third timer channel
++ may be used as a clock event device supporting oneshot mode
++ (delays of up to two seconds) based on the 32 KiHz clock.
++
++config ATMEL_TCB_CLKSRC_BLOCK
++ int
++ depends on ATMEL_TCB_CLKSRC
++ prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
++ default 0
++ range 0 1
++ help
++ Some chips provide more than one TC block, so you have the
++ choice of which one to use for the clock framework. The other
++ TC can be used for other purposes, such as PWM generation and
++ interval timing.
++
+ config IBM_ASM
+ tristate "Device driver for IBM RSA service processor"
+ depends on X86 && PCI && INPUT && EXPERIMENTAL
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -10,6 +10,7 @@
+ obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
+ obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
+ obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
++obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
+ obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
+ obj-$(CONFIG_LKDTM) += lkdtm.o
+ obj-$(CONFIG_TIFM_CORE) += tifm_core.o
--- /dev/null
+++ b/drivers/misc/atmel_tclib.c
@@ -0,0 +1,161 @@
@@ -8920,61 +9631,38 @@
+ return platform_driver_probe(&tc_driver, tc_probe);
+}
+arch_initcall(tc_init);
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -22,6 +22,39 @@
- purposes including software controlled power-efficent backlights
- on LCD displays, motor control, and waveform generation.
+--- a/drivers/mmc/host/Kconfig
++++ b/drivers/mmc/host/Kconfig
+@@ -91,6 +91,16 @@
-+config ATMEL_TCLIB
-+ bool "Atmel AT32/AT91 Timer/Counter Library"
-+ depends on (AVR32 || ARCH_AT91)
-+ help
-+ Select this if you want a library to allocate the Timer/Counter
-+ blocks found on many Atmel processors. This facilitates using
-+ these blocks by different drivers despite processor differences.
-+
-+config ATMEL_TCB_CLKSRC
-+ bool "TC Block Clocksource"
-+ depends on ATMEL_TCLIB && GENERIC_TIME
-+ default y
+ If unsure, say N.
+
++config MMC_ATMELMCI
++ tristate "Atmel Multimedia Card Interface support"
++ depends on AVR32 && MMC
+ help
-+ Select this to get a high precision clocksource based on a
-+ TC block with a 5+ MHz base clock rate. Two timer channels
-+ are combined to make a single 32-bit timer.
-+
-+ When GENERIC_CLOCKEVENTS is defined, the third timer channel
-+ may be used as a clock event device supporting oneshot mode
-+ (delays of up to two seconds) based on the 32 KiHz clock.
++ This selects the Atmel Multimedia Card Interface. If you have
++ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
++ slot, say Y or M here.
+
-+config ATMEL_TCB_CLKSRC_BLOCK
-+ int
-+ depends on ATMEL_TCB_CLKSRC
-+ prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
-+ default 0
-+ range 0 1
-+ help
-+ Some chips provide more than one TC block, so you have the
-+ choice of which one to use for the clock framework. The other
-+ TC can be used for other purposes, such as PWM generation and
-+ interval timing.
++ If unsure, say N.
+
- config IBM_ASM
- tristate "Device driver for IBM RSA service processor"
- depends on X86 && PCI && INPUT && EXPERIMENTAL
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -10,6 +10,7 @@
- obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
- obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
- obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
-+obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
- obj-$(CONFIG_TC1100_WMI) += tc1100-wmi.o
- obj-$(CONFIG_LKDTM) += lkdtm.o
- obj-$(CONFIG_TIFM_CORE) += tifm_core.o
+ config MMC_IMX
+ tristate "Motorola i.MX Multimedia Card Interface support"
+ depends on ARCH_IMX
+--- a/drivers/mmc/host/Makefile
++++ b/drivers/mmc/host/Makefile
+@@ -15,6 +15,7 @@
+ obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
+ obj-$(CONFIG_MMC_OMAP) += omap.o
+ obj-$(CONFIG_MMC_AT91) += at91_mci.o
++obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
+ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
+ obj-$(CONFIG_MMC_SPI) += mmc_spi.o
+
--- /dev/null
+++ b/drivers/mmc/host/atmel-mci.c
-@@ -0,0 +1,1220 @@
+@@ -0,0 +1,1234 @@
+/*
+ * Atmel MultiMedia Card Interface driver
+ *
@@ -9054,6 +9742,7 @@
+ struct clk *mck;
+ struct platform_device *pdev;
+
++ int pending_stop;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debugfs_root;
+ struct dentry *debugfs_regs;
@@ -9843,6 +10532,12 @@
+ data->bytes_xfered = data->blocks * data->blksz;
+ atmci_data_complete(host, data);
+ }
++ /* See if there is a pending STOP which can be sent */
++ if (host->pending_stop && mci_cmd_is_complete(host)) {
++ host->pending_stop = 0;
++ if (mrq->stop && !mci_set_stop_sent_is_completed(host))
++ send_stop_cmd(host->mmc, mrq->data, 0);
++ }
+}
+
+static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
@@ -9895,9 +10590,16 @@
+ * drivers) or when interrupts are disabled for a long time.
+ */
+ mci_set_dma_complete(host);
-+ if (data->stop && mci_cmd_is_complete(host)
-+ && !mci_set_stop_sent_is_completed(host))
-+ send_stop_cmd(host->mmc, data, 0);
++
++ if (data->stop) {
++ if (!mci_cmd_is_complete(host)) {
++ /* Just remember a STOP must be sent */
++ host->pending_stop = 1;
++ } else if (!mci_set_stop_sent_is_completed(host)) {
++ send_stop_cmd(host->mmc, data, 0);
++ host->pending_stop = 0;
++ }
++ }
+
+ /*
+ * Regardless of what the documentation says, we have to wait
@@ -10390,35 +11092,78 @@
+ __raw_writel((value), (port)->regs + MCI_##reg)
+
+#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
---- a/drivers/mmc/host/Kconfig
-+++ b/drivers/mmc/host/Kconfig
-@@ -91,6 +91,16 @@
+--- a/drivers/mtd/nand/Kconfig
++++ b/drivers/mtd/nand/Kconfig
+@@ -272,12 +272,54 @@
- If unsure, say N.
+ If you say "m", the module will be called "cs553x_nand.ko".
-+config MMC_ATMELMCI
-+ tristate "Atmel Multimedia Card Interface support"
-+ depends on AVR32 && MMC
+-config MTD_NAND_AT91
+- bool "Support for NAND Flash / SmartMedia on AT91"
+- depends on ARCH_AT91
++config MTD_NAND_ATMEL
++ bool "Support for NAND Flash / SmartMedia on AT91 and AVR32"
++ depends on ARCH_AT91 || AVR32
+ help
+ Enables support for NAND Flash / Smart Media Card interface
+- on Atmel AT91 processors.
++ on Atmel AT91 and AVR32 processors.
++choice
++ prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
++ depends on MTD_NAND_ATMEL
++
++config MTD_NAND_ATMEL_ECC_HW
++ bool "Hardware ECC"
++ depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
+ help
-+ This selects the Atmel Multimedia Card Interface. If you have
-+ a AT91 (ARM) or AT32 (AVR32) platform with a Multimedia Card
-+ slot, say Y or M here.
++ Use hardware ECC instead of software ECC when the chip
++ supports it.
+
-+ If unsure, say N.
++ The hardware ECC controller is capable of single bit error
++ correction and 2-bit random detection per page.
+
- config MMC_IMX
- tristate "Motorola i.MX Multimedia Card Interface support"
- depends on ARCH_IMX
---- a/drivers/mmc/host/Makefile
-+++ b/drivers/mmc/host/Makefile
-@@ -15,6 +15,7 @@
- obj-$(CONFIG_MMC_AU1X) += au1xmmc.o
- obj-$(CONFIG_MMC_OMAP) += omap.o
- obj-$(CONFIG_MMC_AT91) += at91_mci.o
-+obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o
- obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
- obj-$(CONFIG_MMC_SPI) += mmc_spi.o
++ NB : hardware and software ECC schemes are incompatible.
++ If you switch from one to another, you'll have to erase your
++ mtd partition.
++
++ If unsure, say Y
++
++config MTD_NAND_ATMEL_ECC_SOFT
++ bool "Software ECC"
++ help
++ Use software ECC.
++
++ NB : hardware and software ECC schemes are incompatible.
++ If you switch from one to another, you'll have to erase your
++ mtd partition.
++
++config MTD_NAND_ATMEL_ECC_NONE
++ bool "No ECC (testing only, DANGEROUS)"
++ depends on DEBUG_KERNEL
++ help
++ No ECC will be used.
++ It's not a good idea and it should be reserved for testing
++ purpose only.
++
++ If unsure, say N
++
++ endchoice
++
++endchoice
+ config MTD_NAND_CM_X270
+ tristate "Support for NAND Flash on CM-X270 modules"
+--- a/drivers/mtd/nand/Makefile
++++ b/drivers/mtd/nand/Makefile
+@@ -24,7 +24,7 @@
+ obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
+ obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
+ obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
+-obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
++obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
+ obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
+ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
+ obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
--- a/drivers/mtd/nand/at91_nand.c
+++ /dev/null
@@ -1,236 +0,0 @@
@@ -11357,78 +12102,6 @@
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_DESCRIPTION(DRV_DESC);
+MODULE_ALIAS("platform:" DRV_NAME);
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -272,12 +272,54 @@
-
- If you say "m", the module will be called "cs553x_nand.ko".
-
--config MTD_NAND_AT91
-- bool "Support for NAND Flash / SmartMedia on AT91"
-- depends on ARCH_AT91
-+config MTD_NAND_ATMEL
-+ bool "Support for NAND Flash / SmartMedia on AT91 and AVR32"
-+ depends on ARCH_AT91 || AVR32
- help
- Enables support for NAND Flash / Smart Media Card interface
-- on Atmel AT91 processors.
-+ on Atmel AT91 and AVR32 processors.
-+choice
-+ prompt "ECC management for NAND Flash / SmartMedia on AT91 / AVR32"
-+ depends on MTD_NAND_ATMEL
-+
-+config MTD_NAND_ATMEL_ECC_HW
-+ bool "Hardware ECC"
-+ depends on ARCH_AT91SAM9263 || ARCH_AT91SAM9260 || AVR32
-+ help
-+ Use hardware ECC instead of software ECC when the chip
-+ supports it.
-+
-+ The hardware ECC controller is capable of single bit error
-+ correction and 2-bit random detection per page.
-+
-+ NB : hardware and software ECC schemes are incompatible.
-+ If you switch from one to another, you'll have to erase your
-+ mtd partition.
-+
-+ If unsure, say Y
-+
-+config MTD_NAND_ATMEL_ECC_SOFT
-+ bool "Software ECC"
-+ help
-+ Use software ECC.
-+
-+ NB : hardware and software ECC schemes are incompatible.
-+ If you switch from one to another, you'll have to erase your
-+ mtd partition.
-+
-+config MTD_NAND_ATMEL_ECC_NONE
-+ bool "No ECC (testing only, DANGEROUS)"
-+ depends on DEBUG_KERNEL
-+ help
-+ No ECC will be used.
-+ It's not a good idea and it should be reserved for testing
-+ purpose only.
-+
-+ If unsure, say N
-+
-+ endchoice
-+
-+endchoice
-
- config MTD_NAND_CM_X270
- tristate "Support for NAND Flash on CM-X270 modules"
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -24,7 +24,7 @@
- obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
- obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
- obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
--obj-$(CONFIG_MTD_NAND_AT91) += at91_nand.o
-+obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
- obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
- obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
- obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
--- a/drivers/mtd/nand/ndfc.c
+++ b/drivers/mtd/nand/ndfc.c
@@ -317,3 +317,5 @@
@@ -11519,6 +12192,32 @@
---help---
You should say Y here if you have a PC-style parallel port. All
IBM PC compatible computers and some Alphas have PC-style
+--- a/drivers/pcmcia/Kconfig
++++ b/drivers/pcmcia/Kconfig
+@@ -277,6 +277,13 @@
+ Say Y here to support the CompactFlash controller on the
+ PA Semi Electra eval board.
+
++config AT32_CF
++ tristate "AT32AP CompactFlash Controller"
++ depends on PCMCIA && AVR32 && PLATFORM_AT32AP
++ help
++ Say Y here to support the CompactFlash controller on AT32 chips.
++ Or choose M to compile the driver as a module named "at32_cf".
++
+ config PCCARD_NONSTATIC
+ tristate
+
+--- a/drivers/pcmcia/Makefile
++++ b/drivers/pcmcia/Makefile
+@@ -38,6 +38,7 @@
+ obj-$(CONFIG_OMAP_CF) += omap_cf.o
+ obj-$(CONFIG_AT91_CF) += at91_cf.o
+ obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
++obj-$(CONFIG_AT32_CF) += at32_cf.o
+
+ sa11xx_core-y += soc_common.o sa11xx_base.o
+ pxa2xx_core-y += soc_common.o pxa2xx_base.o
--- /dev/null
+++ b/drivers/pcmcia/at32_cf.c
@@ -0,0 +1,533 @@
@@ -12055,35 +12754,57 @@
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for SMC PCMCIA interface");
+MODULE_AUTHOR("Hans-Christian Egtvedt <hcegtvedt@atmel.com>");
---- a/drivers/pcmcia/Kconfig
-+++ b/drivers/pcmcia/Kconfig
-@@ -277,6 +277,13 @@
- Say Y here to support the CompactFlash controller on the
- PA Semi Electra eval board.
+--- a/drivers/rtc/rtc-at32ap700x.c
++++ b/drivers/rtc/rtc-at32ap700x.c
+@@ -262,6 +262,7 @@
+ }
-+config AT32_CF
-+ tristate "AT32AP CompactFlash Controller"
-+ depends on PCMCIA && AVR32 && PLATFORM_AT32AP
-+ help
-+ Say Y here to support the CompactFlash controller on AT32 chips.
-+ Or choose M to compile the driver as a module named "at32_cf".
-+
- config PCCARD_NONSTATIC
- tristate
+ platform_set_drvdata(pdev, rtc);
++ device_init_wakeup(&pdev->dev, 1);
---- a/drivers/pcmcia/Makefile
-+++ b/drivers/pcmcia/Makefile
-@@ -38,6 +38,7 @@
- obj-$(CONFIG_OMAP_CF) += omap_cf.o
- obj-$(CONFIG_AT91_CF) += at91_cf.o
- obj-$(CONFIG_ELECTRA_CF) += electra_cf.o
-+obj-$(CONFIG_AT32_CF) += at32_cf.o
+ dev_info(&pdev->dev, "Atmel RTC for AT32AP700x at %08lx irq %ld\n",
+ (unsigned long)rtc->regs, rtc->irq);
+@@ -281,6 +282,8 @@
+ {
+ struct rtc_at32ap700x *rtc = platform_get_drvdata(pdev);
- sa11xx_core-y += soc_common.o sa11xx_base.o
- pxa2xx_core-y += soc_common.o pxa2xx_base.o
++ device_init_wakeup(&pdev->dev, 0);
++
+ free_irq(rtc->irq, rtc);
+ iounmap(rtc->regs);
+ rtc_device_unregister(rtc->rtc);
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
-@@ -1440,6 +1440,15 @@
+@@ -957,6 +957,20 @@
+ }
+
+ /*
++ * Flush any TX data submitted for DMA. Called when the TX circular
++ * buffer is reset.
++ */
++static void atmel_flush_buffer(struct uart_port *port)
++{
++ struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
++
++ if (atmel_use_dma_tx(port)) {
++ UART_PUT_TCR(port, 0);
++ atmel_port->pdc_tx.ofs = 0;
++ }
++}
++
++/*
+ * Power / Clock management.
+ */
+ static void atmel_serial_pm(struct uart_port *port, unsigned int state,
+@@ -1190,6 +1204,7 @@
+ .break_ctl = atmel_break_ctl,
+ .startup = atmel_startup,
+ .shutdown = atmel_shutdown,
++ .flush_buffer = atmel_flush_buffer,
+ .set_termios = atmel_set_termios,
+ .type = atmel_type,
+ .release_port = atmel_release_port,
+@@ -1440,6 +1455,15 @@
};
#ifdef CONFIG_PM
@@ -12099,7 +12820,7 @@
static int atmel_serial_suspend(struct platform_device *pdev,
pm_message_t state)
{
-@@ -1447,7 +1456,7 @@
+@@ -1447,7 +1471,7 @@
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (device_may_wakeup(&pdev->dev)
@@ -12108,6 +12829,17 @@
enable_irq_wake(port->irq);
else {
uart_suspend_port(&atmel_uart, port);
+--- a/drivers/serial/serial_core.c
++++ b/drivers/serial/serial_core.c
+@@ -552,6 +552,8 @@
+
+ spin_lock_irqsave(&port->lock, flags);
+ uart_circ_clear(&state->info->xmit);
++ if (port->ops->flush_buffer)
++ port->ops->flush_buffer(port);
+ spin_unlock_irqrestore(&port->lock, flags);
+ tty_wakeup(tty);
+ }
--- a/drivers/spi/atmel_spi.c
+++ b/drivers/spi/atmel_spi.c
@@ -51,9 +51,7 @@
@@ -12332,6 +13064,21 @@
/* report completed message */
atmel_spi_msg_done(master, as, msg, 0,
xfer->cs_change);
+--- a/drivers/usb/gadget/Kconfig
++++ b/drivers/usb/gadget/Kconfig
+@@ -118,10 +118,10 @@
+ config USB_GADGET_ATMEL_USBA
+ boolean "Atmel USBA"
+ select USB_GADGET_DUALSPEED
+- depends on AVR32
++ depends on AVR32 || ARCH_AT91CAP9
+ help
+ USBA is the integrated high-speed USB Device controller on
+- the AT32AP700x processors from Atmel.
++ the AT32AP700x and AT91CAP9 processors from Atmel.
+
+ config USB_ATMEL_USBA
+ tristate
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -18,6 +18,7 @@
@@ -12684,21 +13431,6 @@
/* Bitfields in FNUM */
#define USBA_MICRO_FRAME_NUM_OFFSET 0
---- a/drivers/usb/gadget/Kconfig
-+++ b/drivers/usb/gadget/Kconfig
-@@ -118,10 +118,10 @@
- config USB_GADGET_ATMEL_USBA
- boolean "Atmel USBA"
- select USB_GADGET_DUALSPEED
-- depends on AVR32
-+ depends on AVR32 || ARCH_AT91CAP9
- help
- USBA is the integrated high-speed USB Device controller on
-- the AT32AP700x processors from Atmel.
-+ the AT32AP700x and AT91CAP9 processors from Atmel.
-
- config USB_ATMEL_USBA
- tristate
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/atmel_lcdfb.c
@@ -38,7 +38,9 @@
@@ -12846,12 +13578,13 @@
struct platform_device *
at32_add_device_usba(unsigned int id, struct usba_platform_data *data);
-@@ -68,8 +73,17 @@
+@@ -68,9 +73,27 @@
struct platform_device *
at32_add_device_ssc(unsigned int id, unsigned int flags);
-struct platform_device *at32_add_device_twi(unsigned int id);
-struct platform_device *at32_add_device_mci(unsigned int id);
+-struct platform_device *at32_add_device_ac97c(unsigned int id);
+struct i2c_board_info;
+struct platform_device *at32_add_device_twi(unsigned int id,
+ struct i2c_board_info *b,
@@ -12863,10 +13596,20 @@
+};
+struct platform_device *
+at32_add_device_mci(unsigned int id, struct mci_platform_data *data);
- struct platform_device *at32_add_device_ac97c(unsigned int id);
++
++struct ac97c_platform_data {
++ unsigned short dma_rx_periph_id;
++ unsigned short dma_tx_periph_id;
++ unsigned short dma_controller_id;
++ int reset_pin;
++};
++struct platform_device *
++at32_add_device_ac97c(unsigned int id, struct ac97c_platform_data *data);
++
struct platform_device *at32_add_device_abdac(unsigned int id);
-@@ -84,4 +98,20 @@
+ struct cf_platform_data {
+@@ -84,4 +107,20 @@
at32_add_device_cf(unsigned int id, unsigned int extint,
struct cf_platform_data *data);
@@ -13452,6 +14195,16 @@
#endif
#endif /* __ASM_AVR32_IOCTLS_H */
+--- a/include/asm-avr32/mmu_context.h
++++ b/include/asm-avr32/mmu_context.h
+@@ -13,7 +13,6 @@
+ #define __ASM_AVR32_MMU_CONTEXT_H
+
+ #include <asm/tlbflush.h>
+-#include <asm/pgalloc.h>
+ #include <asm/sysreg.h>
+ #include <asm-generic/mm_hooks.h>
+
--- a/include/asm-avr32/page.h
+++ b/include/asm-avr32/page.h
@@ -8,13 +8,11 @@
@@ -13480,6 +14233,185 @@
+#include <asm-generic/pci-dma-compat.h>
+
#endif /* __ASM_AVR32_PCI_H__ */
+--- a/include/asm-avr32/pgalloc.h
++++ b/include/asm-avr32/pgalloc.h
+@@ -8,65 +8,79 @@
+ #ifndef __ASM_AVR32_PGALLOC_H
+ #define __ASM_AVR32_PGALLOC_H
+
+-#include <asm/processor.h>
+-#include <linux/threads.h>
+-#include <linux/slab.h>
+-#include <linux/mm.h>
++#include <linux/quicklist.h>
++#include <asm/page.h>
++#include <asm/pgtable.h>
+
+-#define pmd_populate_kernel(mm, pmd, pte) \
+- set_pmd(pmd, __pmd(_PAGE_TABLE + __pa(pte)))
++#define QUICK_PGD 0 /* Preserve kernel mappings over free */
++#define QUICK_PT 1 /* Zero on free */
+
+-static __inline__ void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
++static inline void pmd_populate_kernel(struct mm_struct *mm,
++ pmd_t *pmd, pte_t *pte)
++{
++ set_pmd(pmd, __pmd((unsigned long)pte));
++}
++
++static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+ pgtable_t pte)
+ {
+- set_pmd(pmd, __pmd(_PAGE_TABLE + page_to_phys(pte)));
++ set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+ }
+ #define pmd_pgtable(pmd) pmd_page(pmd)
+
++static inline void pgd_ctor(void *x)
++{
++ pgd_t *pgd = x;
++
++ memcpy(pgd + USER_PTRS_PER_PGD,
++ swapper_pg_dir + USER_PTRS_PER_PGD,
++ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
++}
++
+ /*
+ * Allocate and free page tables
+ */
+-static __inline__ pgd_t *pgd_alloc(struct mm_struct *mm)
++static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+ {
+- return kcalloc(USER_PTRS_PER_PGD, sizeof(pgd_t), GFP_KERNEL);
++ return quicklist_alloc(QUICK_PGD, GFP_KERNEL | __GFP_REPEAT, pgd_ctor);
+ }
+
+ static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+ {
+- kfree(pgd);
++ quicklist_free(QUICK_PGD, NULL, pgd);
+ }
+
+ static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+ unsigned long address)
+ {
+- pte_t *pte;
+-
+- pte = (pte_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
+-
+- return pte;
++ return quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
+ }
+
+-static inline struct page *pte_alloc_one(struct mm_struct *mm,
++static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
+ {
+- struct page *pte;
++ struct page *page;
++ void *pg;
+
+- pte = alloc_page(GFP_KERNEL | __GFP_REPEAT | __GFP_ZERO);
+- if (!pte)
++ pg = quicklist_alloc(QUICK_PT, GFP_KERNEL | __GFP_REPEAT, NULL);
++ if (!pg)
+ return NULL;
+- pgtable_page_ctor(pte);
+- return pte;
++
++ page = virt_to_page(pg);
++ pgtable_page_ctor(page);
++
++ return page;
+ }
+
+ static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+ {
+- free_page((unsigned long)pte);
++ quicklist_free(QUICK_PT, NULL, pte);
+ }
+
+ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
+ {
+ pgtable_page_dtor(pte);
+- __free_page(pte);
++ quicklist_free_page(QUICK_PT, NULL, pte);
+ }
+
+ #define __pte_free_tlb(tlb,pte) \
+@@ -75,6 +89,10 @@
+ tlb_remove_page((tlb), pte); \
+ } while (0)
+
+-#define check_pgt_cache() do { } while(0)
++static inline void check_pgt_cache(void)
++{
++ quicklist_trim(QUICK_PGD, NULL, 25, 16);
++ quicklist_trim(QUICK_PT, NULL, 25, 16);
++}
+
+ #endif /* __ASM_AVR32_PGALLOC_H */
+--- a/include/asm-avr32/pgtable.h
++++ b/include/asm-avr32/pgtable.h
+@@ -129,13 +129,6 @@
+
+ #define _PAGE_FLAGS_CACHE_MASK (_PAGE_CACHABLE | _PAGE_BUFFER | _PAGE_WT)
+
+-/* TODO: Check for saneness */
+-/* User-mode page table flags (to be set in a pgd or pmd entry) */
+-#define _PAGE_TABLE (_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \
+- | _PAGE_USER | _PAGE_ACCESSED | _PAGE_DIRTY)
+-/* Kernel-mode page table flags */
+-#define _KERNPG_TABLE (_PAGE_PRESENT | _PAGE_TYPE_SMALL | _PAGE_RW \
+- | _PAGE_ACCESSED | _PAGE_DIRTY)
+ /* Flags that may be modified by software */
+ #define _PAGE_CHG_MASK (PTE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY \
+ | _PAGE_FLAGS_CACHE_MASK)
+@@ -254,10 +247,14 @@
+ }
+
+ #define pmd_none(x) (!pmd_val(x))
+-#define pmd_present(x) (pmd_val(x) & _PAGE_PRESENT)
+-#define pmd_clear(xp) do { set_pmd(xp, __pmd(0)); } while (0)
+-#define pmd_bad(x) ((pmd_val(x) & (~PAGE_MASK & ~_PAGE_USER)) \
+- != _KERNPG_TABLE)
++#define pmd_present(x) (pmd_val(x))
++
++static inline void pmd_clear(pmd_t *pmdp)
++{
++ set_pmd(pmdp, __pmd(0));
++}
++
++#define pmd_bad(x) (pmd_val(x) & ~PAGE_MASK)
+
+ /*
+ * Permanent address of a page. We don't support highmem, so this is
+@@ -295,19 +292,16 @@
+
+ #define page_pte(page) page_pte_prot(page, __pgprot(0))
+
+-#define pmd_page_vaddr(pmd) \
+- ((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+-
+-#define pmd_page(pmd) (phys_to_page(pmd_val(pmd)))
++#define pmd_page_vaddr(pmd) pmd_val(pmd)
++#define pmd_page(pmd) (virt_to_page(pmd_val(pmd)))
+
+ /* to find an entry in a page-table-directory. */
+-#define pgd_index(address) (((address) >> PGDIR_SHIFT) & (PTRS_PER_PGD-1))
+-#define pgd_offset(mm, address) ((mm)->pgd+pgd_index(address))
+-#define pgd_offset_current(address) \
+- ((pgd_t *)__mfsr(SYSREG_PTBR) + pgd_index(address))
++#define pgd_index(address) (((address) >> PGDIR_SHIFT) \
++ & (PTRS_PER_PGD - 1))
++#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
+
+ /* to find an entry in a kernel page-table-directory */
+-#define pgd_offset_k(address) pgd_offset(&init_mm, address)
++#define pgd_offset_k(address) pgd_offset(&init_mm, address)
+
+ /* Find an entry in the third-level page table.. */
+ #define pte_index(address) \
--- /dev/null
+++ b/include/asm-avr32/serial.h
@@ -0,0 +1,13 @@
@@ -13506,6 +14438,16 @@
#define TIF_DEBUG 30 /* debugging enabled */
#define TIF_USERSPACE 31 /* true if FS sets userspace */
+--- a/include/asm-avr32/tlbflush.h
++++ b/include/asm-avr32/tlbflush.h
+@@ -26,7 +26,6 @@
+ extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end);
+ extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long page);
+-extern void __flush_tlb_page(unsigned long asid, unsigned long page);
+
+ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+
--- /dev/null
+++ b/include/asm-avr32/xor.h
@@ -0,0 +1,6 @@
@@ -13781,6 +14723,16 @@
extern int write_inode_now(struct inode *, int);
extern int filemap_fdatawrite(struct address_space *);
extern int filemap_flush(struct address_space *);
+--- a/include/linux/serial_core.h
++++ b/include/linux/serial_core.h
+@@ -188,6 +188,7 @@
+ void (*break_ctl)(struct uart_port *, int ctl);
+ int (*startup)(struct uart_port *);
+ void (*shutdown)(struct uart_port *);
++ void (*flush_buffer)(struct uart_port *);
+ void (*set_termios)(struct uart_port *, struct ktermios *new,
+ struct ktermios *old);
+ void (*pm)(struct uart_port *, unsigned int state,
--- /dev/null
+++ b/include/linux/usb/atmel_usba_udc.h
@@ -0,0 +1,22 @@
@@ -13806,424 +14758,62 @@
+};
+
+#endif /* __LINUX_USB_USBA_H */
---- a/include/mtd/Kbuild
-+++ b/include/mtd/Kbuild
-@@ -3,5 +3,4 @@
- header-y += mtd-abi.h
- header-y += mtd-user.h
- header-y += nftl-user.h
--header-y += ubi-header.h
- header-y += ubi-user.h
---- a/include/mtd/ubi-header.h
-+++ /dev/null
-@@ -1,372 +0,0 @@
--/*
-- * Copyright (c) International Business Machines Corp., 2006
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License as published by
-- * the Free Software Foundation; either version 2 of the License, or
-- * (at your option) any later version.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
-- * the GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-- *
-- * Authors: Artem Bityutskiy (Битюцкий Артём)
-- * Thomas Gleixner
-- * Frank Haverkamp
-- * Oliver Lohmann
-- * Andreas Arnez
-- */
--
--/*
-- * This file defines the layout of UBI headers and all the other UBI on-flash
-- * data structures. May be included by user-space.
-- */
--
--#ifndef __UBI_HEADER_H__
--#define __UBI_HEADER_H__
--
--#include <asm/byteorder.h>
--
--/* The version of UBI images supported by this implementation */
--#define UBI_VERSION 1
--
--/* The highest erase counter value supported by this implementation */
--#define UBI_MAX_ERASECOUNTER 0x7FFFFFFF
--
--/* The initial CRC32 value used when calculating CRC checksums */
--#define UBI_CRC32_INIT 0xFFFFFFFFU
--
--/* Erase counter header magic number (ASCII "UBI#") */
--#define UBI_EC_HDR_MAGIC 0x55424923
--/* Volume identifier header magic number (ASCII "UBI!") */
--#define UBI_VID_HDR_MAGIC 0x55424921
--
--/*
-- * Volume type constants used in the volume identifier header.
-- *
-- * @UBI_VID_DYNAMIC: dynamic volume
-- * @UBI_VID_STATIC: static volume
-- */
--enum {
-- UBI_VID_DYNAMIC = 1,
-- UBI_VID_STATIC = 2
--};
--
--/*
-- * Volume flags used in the volume table record.
-- *
-- * @UBI_VTBL_AUTORESIZE_FLG: auto-resize this volume
-- *
-- * %UBI_VTBL_AUTORESIZE_FLG flag can be set only for one volume in the volume
-- * table. UBI automatically re-sizes the volume which has this flag and makes
-- * the volume to be of largest possible size. This means that if after the
-- * initialization UBI finds out that there are available physical eraseblocks
-- * present on the device, it automatically appends all of them to the volume
-- * (the physical eraseblocks reserved for bad eraseblocks handling and other
-- * reserved physical eraseblocks are not taken). So, if there is a volume with
-- * the %UBI_VTBL_AUTORESIZE_FLG flag set, the amount of available logical
-- * eraseblocks will be zero after UBI is loaded, because all of them will be
-- * reserved for this volume. Note, the %UBI_VTBL_AUTORESIZE_FLG bit is cleared
-- * after the volume had been initialized.
-- *
-- * The auto-resize feature is useful for device production purposes. For
-- * example, different NAND flash chips may have different amount of initial bad
-- * eraseblocks, depending of particular chip instance. Manufacturers of NAND
-- * chips usually guarantee that the amount of initial bad eraseblocks does not
-- * exceed certain percent, e.g. 2%. When one creates an UBI image which will be
-- * flashed to the end devices in production, he does not know the exact amount
-- * of good physical eraseblocks the NAND chip on the device will have, but this
-- * number is required to calculate the volume sized and put them to the volume
-- * table of the UBI image. In this case, one of the volumes (e.g., the one
-- * which will store the root file system) is marked as "auto-resizable", and
-- * UBI will adjust its size on the first boot if needed.
-- *
-- * Note, first UBI reserves some amount of physical eraseblocks for bad
-- * eraseblock handling, and then re-sizes the volume, not vice-versa. This
-- * means that the pool of reserved physical eraseblocks will always be present.
-- */
--enum {
-- UBI_VTBL_AUTORESIZE_FLG = 0x01,
--};
--
--/*
-- * Compatibility constants used by internal volumes.
-- *
-- * @UBI_COMPAT_DELETE: delete this internal volume before anything is written
-- * to the flash
-- * @UBI_COMPAT_RO: attach this device in read-only mode
-- * @UBI_COMPAT_PRESERVE: preserve this internal volume - do not touch its
-- * physical eraseblocks, don't allow the wear-leveling unit to move them
-- * @UBI_COMPAT_REJECT: reject this UBI image
-- */
--enum {
-- UBI_COMPAT_DELETE = 1,
-- UBI_COMPAT_RO = 2,
-- UBI_COMPAT_PRESERVE = 4,
-- UBI_COMPAT_REJECT = 5
--};
--
--/* Sizes of UBI headers */
--#define UBI_EC_HDR_SIZE sizeof(struct ubi_ec_hdr)
--#define UBI_VID_HDR_SIZE sizeof(struct ubi_vid_hdr)
--
--/* Sizes of UBI headers without the ending CRC */
--#define UBI_EC_HDR_SIZE_CRC (UBI_EC_HDR_SIZE - sizeof(__be32))
--#define UBI_VID_HDR_SIZE_CRC (UBI_VID_HDR_SIZE - sizeof(__be32))
--
--/**
-- * struct ubi_ec_hdr - UBI erase counter header.
-- * @magic: erase counter header magic number (%UBI_EC_HDR_MAGIC)
-- * @version: version of UBI implementation which is supposed to accept this
-- * UBI image
-- * @padding1: reserved for future, zeroes
-- * @ec: the erase counter
-- * @vid_hdr_offset: where the VID header starts
-- * @data_offset: where the user data start
-- * @padding2: reserved for future, zeroes
-- * @hdr_crc: erase counter header CRC checksum
-- *
-- * The erase counter header takes 64 bytes and has a plenty of unused space for
-- * future usage. The unused fields are zeroed. The @version field is used to
-- * indicate the version of UBI implementation which is supposed to be able to
-- * work with this UBI image. If @version is greater then the current UBI
-- * version, the image is rejected. This may be useful in future if something
-- * is changed radically. This field is duplicated in the volume identifier
-- * header.
-- *
-- * The @vid_hdr_offset and @data_offset fields contain the offset of the the
-- * volume identifier header and user data, relative to the beginning of the
-- * physical eraseblock. These values have to be the same for all physical
-- * eraseblocks.
-- */
--struct ubi_ec_hdr {
-- __be32 magic;
-- __u8 version;
-- __u8 padding1[3];
-- __be64 ec; /* Warning: the current limit is 31-bit anyway! */
-- __be32 vid_hdr_offset;
-- __be32 data_offset;
-- __u8 padding2[36];
-- __be32 hdr_crc;
--} __attribute__ ((packed));
--
--/**
-- * struct ubi_vid_hdr - on-flash UBI volume identifier header.
-- * @magic: volume identifier header magic number (%UBI_VID_HDR_MAGIC)
-- * @version: UBI implementation version which is supposed to accept this UBI
-- * image (%UBI_VERSION)
-- * @vol_type: volume type (%UBI_VID_DYNAMIC or %UBI_VID_STATIC)
-- * @copy_flag: if this logical eraseblock was copied from another physical
-- * eraseblock (for wear-leveling reasons)
-- * @compat: compatibility of this volume (%0, %UBI_COMPAT_DELETE,
-- * %UBI_COMPAT_IGNORE, %UBI_COMPAT_PRESERVE, or %UBI_COMPAT_REJECT)
-- * @vol_id: ID of this volume
-- * @lnum: logical eraseblock number
-- * @leb_ver: version of this logical eraseblock (IMPORTANT: obsolete, to be
-- * removed, kept only for not breaking older UBI users)
-- * @data_size: how many bytes of data this logical eraseblock contains
-- * @used_ebs: total number of used logical eraseblocks in this volume
-- * @data_pad: how many bytes at the end of this physical eraseblock are not
-- * used
-- * @data_crc: CRC checksum of the data stored in this logical eraseblock
-- * @padding1: reserved for future, zeroes
-- * @sqnum: sequence number
-- * @padding2: reserved for future, zeroes
-- * @hdr_crc: volume identifier header CRC checksum
-- *
-- * The @sqnum is the value of the global sequence counter at the time when this
-- * VID header was created. The global sequence counter is incremented each time
-- * UBI writes a new VID header to the flash, i.e. when it maps a logical
-- * eraseblock to a new physical eraseblock. The global sequence counter is an
-- * unsigned 64-bit integer and we assume it never overflows. The @sqnum
-- * (sequence number) is used to distinguish between older and newer versions of
-- * logical eraseblocks.
-- *
-- * There are 2 situations when there may be more then one physical eraseblock
-- * corresponding to the same logical eraseblock, i.e., having the same @vol_id
-- * and @lnum values in the volume identifier header. Suppose we have a logical
-- * eraseblock L and it is mapped to the physical eraseblock P.
-- *
-- * 1. Because UBI may erase physical eraseblocks asynchronously, the following
-- * situation is possible: L is asynchronously erased, so P is scheduled for
-- * erasure, then L is written to,i.e. mapped to another physical eraseblock P1,
-- * so P1 is written to, then an unclean reboot happens. Result - there are 2
-- * physical eraseblocks P and P1 corresponding to the same logical eraseblock
-- * L. But P1 has greater sequence number, so UBI picks P1 when it attaches the
-- * flash.
-- *
-- * 2. From time to time UBI moves logical eraseblocks to other physical
-- * eraseblocks for wear-leveling reasons. If, for example, UBI moves L from P
-- * to P1, and an unclean reboot happens before P is physically erased, there
-- * are two physical eraseblocks P and P1 corresponding to L and UBI has to
-- * select one of them when the flash is attached. The @sqnum field says which
-- * PEB is the original (obviously P will have lower @sqnum) and the copy. But
-- * it is not enough to select the physical eraseblock with the higher sequence
-- * number, because the unclean reboot could have happen in the middle of the
-- * copying process, so the data in P is corrupted. It is also not enough to
-- * just select the physical eraseblock with lower sequence number, because the
-- * data there may be old (consider a case if more data was added to P1 after
-- * the copying). Moreover, the unclean reboot may happen when the erasure of P
-- * was just started, so it result in unstable P, which is "mostly" OK, but
-- * still has unstable bits.
-- *
-- * UBI uses the @copy_flag field to indicate that this logical eraseblock is a
-- * copy. UBI also calculates data CRC when the data is moved and stores it at
-- * the @data_crc field of the copy (P1). So when UBI needs to pick one physical
-- * eraseblock of two (P or P1), the @copy_flag of the newer one (P1) is
-- * examined. If it is cleared, the situation* is simple and the newer one is
-- * picked. If it is set, the data CRC of the copy (P1) is examined. If the CRC
-- * checksum is correct, this physical eraseblock is selected (P1). Otherwise
-- * the older one (P) is selected.
-- *
-- * Note, there is an obsolete @leb_ver field which was used instead of @sqnum
-- * in the past. But it is not used anymore and we keep it in order to be able
-- * to deal with old UBI images. It will be removed at some point.
-- *
-- * There are 2 sorts of volumes in UBI: user volumes and internal volumes.
-- * Internal volumes are not seen from outside and are used for various internal
-- * UBI purposes. In this implementation there is only one internal volume - the
-- * layout volume. Internal volumes are the main mechanism of UBI extensions.
-- * For example, in future one may introduce a journal internal volume. Internal
-- * volumes have their own reserved range of IDs.
-- *
-- * The @compat field is only used for internal volumes and contains the "degree
-- * of their compatibility". It is always zero for user volumes. This field
-- * provides a mechanism to introduce UBI extensions and to be still compatible
-- * with older UBI binaries. For example, if someone introduced a journal in
-- * future, he would probably use %UBI_COMPAT_DELETE compatibility for the
-- * journal volume. And in this case, older UBI binaries, which know nothing
-- * about the journal volume, would just delete this volume and work perfectly
-- * fine. This is similar to what Ext2fs does when it is fed by an Ext3fs image
-- * - it just ignores the Ext3fs journal.
-- *
-- * The @data_crc field contains the CRC checksum of the contents of the logical
-- * eraseblock if this is a static volume. In case of dynamic volumes, it does
-- * not contain the CRC checksum as a rule. The only exception is when the
-- * data of the physical eraseblock was moved by the wear-leveling unit, then
-- * the wear-leveling unit calculates the data CRC and stores it in the
-- * @data_crc field. And of course, the @copy_flag is %in this case.
-- *
-- * The @data_size field is used only for static volumes because UBI has to know
-- * how many bytes of data are stored in this eraseblock. For dynamic volumes,
-- * this field usually contains zero. The only exception is when the data of the
-- * physical eraseblock was moved to another physical eraseblock for
-- * wear-leveling reasons. In this case, UBI calculates CRC checksum of the
-- * contents and uses both @data_crc and @data_size fields. In this case, the
-- * @data_size field contains data size.
-- *
-- * The @used_ebs field is used only for static volumes and indicates how many
-- * eraseblocks the data of the volume takes. For dynamic volumes this field is
-- * not used and always contains zero.
-- *
-- * The @data_pad is calculated when volumes are created using the alignment
-- * parameter. So, effectively, the @data_pad field reduces the size of logical
-- * eraseblocks of this volume. This is very handy when one uses block-oriented
-- * software (say, cramfs) on top of the UBI volume.
-- */
--struct ubi_vid_hdr {
-- __be32 magic;
-- __u8 version;
-- __u8 vol_type;
-- __u8 copy_flag;
-- __u8 compat;
-- __be32 vol_id;
-- __be32 lnum;
-- __be32 leb_ver; /* obsolete, to be removed, don't use */
-- __be32 data_size;
-- __be32 used_ebs;
-- __be32 data_pad;
-- __be32 data_crc;
-- __u8 padding1[4];
-- __be64 sqnum;
-- __u8 padding2[12];
-- __be32 hdr_crc;
--} __attribute__ ((packed));
--
--/* Internal UBI volumes count */
--#define UBI_INT_VOL_COUNT 1
--
--/*
-- * Starting ID of internal volumes. There is reserved room for 4096 internal
-- * volumes.
-- */
--#define UBI_INTERNAL_VOL_START (0x7FFFFFFF - 4096)
--
--/* The layout volume contains the volume table */
--
--#define UBI_LAYOUT_VOLUME_ID UBI_INTERNAL_VOL_START
--#define UBI_LAYOUT_VOLUME_TYPE UBI_VID_DYNAMIC
--#define UBI_LAYOUT_VOLUME_ALIGN 1
--#define UBI_LAYOUT_VOLUME_EBS 2
--#define UBI_LAYOUT_VOLUME_NAME "layout volume"
--#define UBI_LAYOUT_VOLUME_COMPAT UBI_COMPAT_REJECT
--
--/* The maximum number of volumes per one UBI device */
--#define UBI_MAX_VOLUMES 128
--
--/* The maximum volume name length */
--#define UBI_VOL_NAME_MAX 127
--
--/* Size of the volume table record */
--#define UBI_VTBL_RECORD_SIZE sizeof(struct ubi_vtbl_record)
--
--/* Size of the volume table record without the ending CRC */
--#define UBI_VTBL_RECORD_SIZE_CRC (UBI_VTBL_RECORD_SIZE - sizeof(__be32))
--
--/**
-- * struct ubi_vtbl_record - a record in the volume table.
-- * @reserved_pebs: how many physical eraseblocks are reserved for this volume
-- * @alignment: volume alignment
-- * @data_pad: how many bytes are unused at the end of the each physical
-- * eraseblock to satisfy the requested alignment
-- * @vol_type: volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
-- * @upd_marker: if volume update was started but not finished
-- * @name_len: volume name length
-- * @name: the volume name
-- * @flags: volume flags (%UBI_VTBL_AUTORESIZE_FLG)
-- * @padding: reserved, zeroes
-- * @crc: a CRC32 checksum of the record
-- *
-- * The volume table records are stored in the volume table, which is stored in
-- * the layout volume. The layout volume consists of 2 logical eraseblock, each
-- * of which contains a copy of the volume table (i.e., the volume table is
-- * duplicated). The volume table is an array of &struct ubi_vtbl_record
-- * objects indexed by the volume ID.
-- *
-- * If the size of the logical eraseblock is large enough to fit
-- * %UBI_MAX_VOLUMES records, the volume table contains %UBI_MAX_VOLUMES
-- * records. Otherwise, it contains as many records as it can fit (i.e., size of
-- * logical eraseblock divided by sizeof(struct ubi_vtbl_record)).
-- *
-- * The @upd_marker flag is used to implement volume update. It is set to %1
-- * before update and set to %0 after the update. So if the update operation was
-- * interrupted, UBI knows that the volume is corrupted.
-- *
-- * The @alignment field is specified when the volume is created and cannot be
-- * later changed. It may be useful, for example, when a block-oriented file
-- * system works on top of UBI. The @data_pad field is calculated using the
-- * logical eraseblock size and @alignment. The alignment must be multiple to the
-- * minimal flash I/O unit. If @alignment is 1, all the available space of
-- * the physical eraseblocks is used.
-- *
-- * Empty records contain all zeroes and the CRC checksum of those zeroes.
-- */
--struct ubi_vtbl_record {
-- __be32 reserved_pebs;
-- __be32 alignment;
-- __be32 data_pad;
-- __u8 vol_type;
-- __u8 upd_marker;
-- __be16 name_len;
-- __u8 name[UBI_VOL_NAME_MAX+1];
-- __u8 flags;
-- __u8 padding[23];
-- __be32 crc;
--} __attribute__ ((packed));
--
--#endif /* !__UBI_HEADER_H__ */
---- a/init/do_mounts.c
-+++ b/init/do_mounts.c
-@@ -126,8 +126,14 @@
-
- static int __init rootwait_setup(char *str)
- {
-- if (*str)
-+ if (*str && *str != '=')
- return 0;
+--- a/mm/Kconfig
++++ b/mm/Kconfig
+@@ -187,7 +187,7 @@
+ config NR_QUICK
+ int
+ depends on QUICKLIST
+- default "2" if SUPERH
++ default "2" if SUPERH || AVR32
+ default "1"
+
+ config VIRT_TO_BUS
+--- a/sound/Kconfig
++++ b/sound/Kconfig
+@@ -63,6 +63,8 @@
+
+ source "sound/arm/Kconfig"
+
++source "sound/avr32/Kconfig"
++
+ if SPI
+ source "sound/spi/Kconfig"
+ endif
+--- a/sound/Makefile
++++ b/sound/Makefile
+@@ -6,7 +6,7 @@
+ obj-$(CONFIG_SOUND_PRIME) += oss/
+ obj-$(CONFIG_DMASOUND) += oss/
+ obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
+- sparc/ spi/ parisc/ pcmcia/ mips/ soc/
++ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
+ obj-$(CONFIG_SND_AOA) += aoa/
+
+ # This one must be compilable even if sound is configured out
+--- /dev/null
++++ b/sound/avr32/Kconfig
+@@ -0,0 +1,11 @@
++menu "AVR32 devices"
++ depends on SND != n && AVR32
+
-+ if (*str)
-+ printk(KERN_WARNING
-+ "WARNING: \"rootwait=1\" is deprecated, "
-+ "use \"rootwait\" instead.\n");
++config SND_ATMEL_AC97
++ tristate "Atmel AC97 Controller Driver"
++ select SND_PCM
++ select SND_AC97_CODEC
++ help
++ ALSA sound driver for the Atmel AC97 controller.
+
- root_wait = 1;
- return 1;
- }
-@@ -347,7 +353,8 @@
-
- if (saved_root_name[0]) {
- root_device_name = saved_root_name;
-- if (!strncmp(root_device_name, "mtd", 3)) {
-+ if (!strncmp(root_device_name, "mtd", 3) ||
-+ !strncmp(root_device_name, "ubi", 3)) {
- mount_block_root(root_device_name, root_mountflags);
- goto out;
- }
++endmenu
--- /dev/null
-+++ b/localversion-atmel
-@@ -0,0 +1 @@
-+.atmel.1
++++ b/sound/avr32/Makefile
+@@ -0,0 +1,3 @@
++snd-atmel-ac97-objs := ac97c.o
++
++obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
--- /dev/null
+++ b/sound/avr32/ac97c.c
-@@ -0,0 +1,914 @@
+@@ -0,0 +1,951 @@
+/*
+ * Driver for the Atmel AC97 controller
+ *
@@ -14236,6 +14826,7 @@
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
++#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
@@ -14243,7 +14834,6 @@
+#include <linux/mutex.h>
+#include <linux/io.h>
+
-+#include <sound/driver.h>
+#include <sound/core.h>
+#include <sound/initval.h>
+#include <sound/pcm.h>
@@ -14251,6 +14841,7 @@
+#include <sound/ac97_codec.h>
+#include <sound/memalloc.h>
+
++#include <asm/arch/board.h>
+#include <asm/dma-controller.h>
+
+#include "ac97c.h"
@@ -14263,6 +14854,7 @@
+ struct dma_request_cyclic req_rx;
+ unsigned short rx_periph_id;
+ unsigned short tx_periph_id;
++ unsigned short controller;
+};
+
+struct atmel_ac97 {
@@ -14277,6 +14869,7 @@
+ struct snd_ac97_bus *ac97_bus;
+ int opened;
+ int period;
++ int reset_pin;
+ u64 cur_format;
+ unsigned int cur_rate;
+ struct clk *mck;
@@ -14918,6 +15511,14 @@
+
+static void snd_atmel_ac97_reset(struct atmel_ac97 *chip)
+{
++ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
++ if (chip->reset_pin >= 0) {
++ gpio_set_value(chip->reset_pin, 0);
++ /* AC97 v2.2 specifications says minimum 1 us. */
++ udelay(5);
++ gpio_set_value(chip->reset_pin, 1);
++ }
++
+ ac97c_writel(chip, MR, AC97C_MR_WRST);
+ mdelay(1);
+ ac97c_writel(chip, MR, AC97C_MR_ENA);
@@ -14953,6 +15554,7 @@
+ .read = snd_atmel_ac97_read,
+ };
+ struct atmel_ac97 *chip = get_chip(card);
++ struct ac97c_platform_data *pdata;
+ struct resource *regs;
+ struct clk *mck;
+ int err;
@@ -14961,6 +15563,26 @@
+ if (!regs)
+ return -ENXIO;
+
++ pdata = pdev->dev.platform_data;
++ if (!pdata)
++ return -ENXIO;
++
++ chip->reset_pin = pdata->reset_pin;
++
++ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
++ if (chip->reset_pin >= 0) {
++ if (gpio_request(chip->reset_pin, chip->card->shortname)) {
++ dev_dbg(&pdev->dev, "ac97: reset pin not available\n");
++ chip->reset_pin = -1;
++ } else {
++ gpio_direction_output(chip->reset_pin, 1);
++ }
++ }
++
++ chip->dma.rx_periph_id = pdata->dma_rx_periph_id;
++ chip->dma.tx_periph_id = pdata->dma_tx_periph_id;
++ chip->dma.controller = pdata->dma_controller_id;
++
+ mck = clk_get(&pdev->dev, "pclk");
+ if (IS_ERR(mck))
+ return PTR_ERR(mck);
@@ -14999,7 +15621,9 @@
+ THIS_MODULE, sizeof(struct atmel_ac97));
+ if (!card)
+ goto out;
++
+ chip = get_chip(card);
++ chip->reset_pin = -1;
+
+ err = snd_atmel_ac97_create(card, pdev);
+ if (err)
@@ -15015,23 +15639,19 @@
+ if (err)
+ goto out_free_card;
+
-+ /* TODO: Get this information from the platform device */
-+ chip->dma.req_tx.req.dmac = find_dma_controller(0);
++ chip->dma.req_tx.req.dmac = find_dma_controller(chip->dma.controller);
+ if (!chip->dma.req_tx.req.dmac) {
+ dev_dbg(&chip->pdev->dev, "DMA controller for TX missing\n");
+ err = -ENODEV;
+ goto out_free_card;
+ }
-+ chip->dma.req_rx.req.dmac = find_dma_controller(0);
++ chip->dma.req_rx.req.dmac = find_dma_controller(chip->dma.controller);
+ if (!chip->dma.req_rx.req.dmac) {
+ dev_dbg(&chip->pdev->dev, "DMA controller for RX missing\n");
+ err = -ENODEV;
+ goto out_free_card;
+ }
+
-+ chip->dma.rx_periph_id = 3;
-+ chip->dma.tx_periph_id = 4;
-+
+ ch = dma_alloc_channel(chip->dma.req_tx.req.dmac);
+ if (ch < 0) {
+ dev_dbg(&chip->pdev->dev,
@@ -15073,6 +15693,9 @@
+ return 0;
+
+out_free_card:
++ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
++ if (chip->reset_pin >= 0)
++ gpio_free(chip->reset_pin);
+ snd_card_free(card);
+out:
+ return err;
@@ -15092,7 +15715,7 @@
+
+static int snd_atmel_ac97_resume(struct platform_device *pdev)
+{
-+ struct snd_card *card = dev_get_drvdata(pdev);
++ struct snd_card *card = platform_get_drvdata(pdev);
+ struct atmel_ac97 *chip = card->private_data;
+
+ clk_enable(chip->mck);
@@ -15107,7 +15730,11 @@
+static int __devexit snd_atmel_ac97_remove(struct platform_device *pdev)
+{
+ struct snd_card *card = platform_get_drvdata(pdev);
++ struct atmel_ac97 *chip = get_chip(card);
+
++ /* TODO: gpio_is_valid(data->reset_pin) with kernel 2.6.26. */
++ if (chip->reset_pin >= 0)
++ gpio_free(chip->reset_pin);
+ snd_card_free(card);
+ platform_set_drvdata(pdev, NULL);
+ return 0;
@@ -15212,48 +15839,26 @@
+#define AC97C_CHANNEL_B 0x2
+
+#endif /* __SOUND_AVR32_AC97C_H */
---- /dev/null
-+++ b/sound/avr32/Kconfig
-@@ -0,0 +1,11 @@
-+menu "AVR32 devices"
-+ depends on SND != n && AVR32
-+
-+config SND_ATMEL_AC97
-+ tristate "Atmel AC97 Controller Driver"
-+ select SND_PCM
-+ select SND_AC97_CODEC
-+ help
-+ ALSA sound driver for the Atmel AC97 controller.
-+
-+endmenu
---- /dev/null
-+++ b/sound/avr32/Makefile
-@@ -0,0 +1,3 @@
-+snd-atmel-ac97-objs := ac97c.o
+--- a/sound/oss/Kconfig
++++ b/sound/oss/Kconfig
+@@ -654,3 +654,7 @@
+ int "DAC channel"
+ default "1"
+ depends on SOUND_SH_DAC_AUDIO
+
-+obj-$(CONFIG_SND_ATMEL_AC97) += snd-atmel-ac97.o
---- a/sound/Kconfig
-+++ b/sound/Kconfig
-@@ -63,6 +63,8 @@
-
- source "sound/arm/Kconfig"
++config SOUND_AT32_ABDAC
++ tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
++ depends on SOUND_PRIME && AVR32
+--- a/sound/oss/Makefile
++++ b/sound/oss/Makefile
+@@ -9,6 +9,7 @@
-+source "sound/avr32/Kconfig"
-+
- if SPI
- source "sound/spi/Kconfig"
- endif
---- a/sound/Makefile
-+++ b/sound/Makefile
-@@ -6,7 +6,7 @@
- obj-$(CONFIG_SOUND_PRIME) += oss/
- obj-$(CONFIG_DMASOUND) += oss/
- obj-$(CONFIG_SND) += core/ i2c/ drivers/ isa/ pci/ ppc/ arm/ sh/ synth/ usb/ \
-- sparc/ spi/ parisc/ pcmcia/ mips/ soc/
-+ sparc/ spi/ parisc/ pcmcia/ mips/ soc/ avr32/
- obj-$(CONFIG_SND_AOA) += aoa/
+ # Please leave it as is, cause the link order is significant !
- # This one must be compilable even if sound is configured out
++obj-$(CONFIG_SOUND_AT32_ABDAC) += at32_abdac.o
+ obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
+ obj-$(CONFIG_SOUND_HAL2) += hal2.o
+ obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
--- /dev/null
+++ b/sound/oss/at32_abdac.c
@@ -0,0 +1,722 @@
@@ -16041,26 +16646,6 @@
+ __raw_writel((value), (port)->regs + DAC_##reg)
+
+#endif /* __SOUND_OSS_AT32_ABDAC_H__ */
---- a/sound/oss/Kconfig
-+++ b/sound/oss/Kconfig
-@@ -654,3 +654,7 @@
- int "DAC channel"
- default "1"
- depends on SOUND_SH_DAC_AUDIO
-+
-+config SOUND_AT32_ABDAC
-+ tristate "Atmel AT32 Audio Bitstream DAC (ABDAC) support"
-+ depends on SOUND_PRIME && AVR32
---- a/sound/oss/Makefile
-+++ b/sound/oss/Makefile
-@@ -9,6 +9,7 @@
-
- # Please leave it as is, cause the link order is significant !
-
-+obj-$(CONFIG_SOUND_AT32_ABDAC) += at32_abdac.o
- obj-$(CONFIG_SOUND_SH_DAC_AUDIO) += sh_dac_audio.o
- obj-$(CONFIG_SOUND_HAL2) += hal2.o
- obj-$(CONFIG_SOUND_AEDSP16) += aedsp16.o
--- a/sound/spi/at73c213.c
+++ b/sound/spi/at73c213.c
@@ -737,7 +737,7 @@
diff --git a/target/linux/avr32/patches/120-fast_sd_cards_fix.patch b/target/linux/avr32/patches/120-fast_sd_cards_fix.patch
deleted file mode 100644
index 2d79b9de05..0000000000
--- a/target/linux/avr32/patches/120-fast_sd_cards_fix.patch
+++ /dev/null
@@ -1,43 +0,0 @@
---- a/drivers/mmc/host/atmel-mci.c
-+++ b/drivers/mmc/host/atmel-mci.c
-@@ -77,6 +77,7 @@ struct atmel_mci {
- struct clk *mck;
- struct platform_device *pdev;
-
-+ int pending_stop;
- #ifdef CONFIG_DEBUG_FS
- struct dentry *debugfs_root;
- struct dentry *debugfs_regs;
-@@ -866,6 +867,12 @@ static void atmci_tasklet_func(unsigned long priv)
- data->bytes_xfered = data->blocks * data->blksz;
- atmci_data_complete(host, data);
- }
-+ /* See if there is a pending STOP which can be sent */
-+ if (host->pending_stop && mci_cmd_is_complete(host)) {
-+ host->pending_stop = 0;
-+ if (mrq->stop && !mci_set_stop_sent_is_completed(host))
-+ send_stop_cmd(host->mmc, mrq->data, 0);
-+ }
- }
-
- static void atmci_cmd_interrupt(struct mmc_host *mmc, u32 status)
-@@ -918,9 +925,16 @@ static void atmci_xfer_complete(struct dma_request *_req)
- * drivers) or when interrupts are disabled for a long time.
- */
- mci_set_dma_complete(host);
-- if (data->stop && mci_cmd_is_complete(host)
-- && !mci_set_stop_sent_is_completed(host))
-- send_stop_cmd(host->mmc, data, 0);
-+
-+ if (data->stop) {
-+ if (!mci_cmd_is_complete(host)) {
-+ /* Just remember a STOP must be sent */
-+ host->pending_stop = 1;
-+ } else if (!mci_set_stop_sent_is_completed(host)) {
-+ send_stop_cmd(host->mmc, data, 0);
-+ host->pending_stop = 0;
-+ }
-+ }
-
- /*
- * Regardless of what the documentation says, we have to wait