aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorJonas Gorski <jogo@openwrt.org>2013-01-04 14:47:43 +0000
committerJonas Gorski <jogo@openwrt.org>2013-01-04 14:47:43 +0000
commit8332b861817c6ee0aba5bb6d8fc032607e2997cb (patch)
tree39638a129dbda0e8601b05e49d0d4459597f3b7c /target
parent7e0eb5f61c71379d881ac4ca67a05eb0b4f35fad (diff)
downloadupstream-8332b861817c6ee0aba5bb6d8fc032607e2997cb.tar.gz
upstream-8332b861817c6ee0aba5bb6d8fc032607e2997cb.tar.bz2
upstream-8332b861817c6ee0aba5bb6d8fc032607e2997cb.zip
bcm63xx: remove 3.3 support
3.6 is tested enough to be considered stable. Signed-off-by: Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35009 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
-rw-r--r--target/linux/brcm63xx/config-3.3159
-rw-r--r--target/linux/brcm63xx/patches-3.3/001-MIPS-BCM63XX-fix-platform_devices-id.patch36
-rw-r--r--target/linux/brcm63xx/patches-3.3/002-MIPS-BCM63XX-be-consistent-in-clock-bits-enable-nami.patch93
-rw-r--r--target/linux/brcm63xx/patches-3.3/003-MIPS-BCM63XX-add-IRQ_SPI-and-CPU-specific-SPI-IRQ-va.patch68
-rw-r--r--target/linux/brcm63xx/patches-3.3/004-MIPS-BCM63XX-define-BCM6358-SPI-base-address.patch21
-rw-r--r--target/linux/brcm63xx/patches-3.3/005-MIPS-BCM63XX-add-BCM6368-SPI-clock-mask.patch26
-rw-r--r--target/linux/brcm63xx/patches-3.3/006-MIPS-BCM63XX-define-SPI-register-sizes.patch26
-rw-r--r--target/linux/brcm63xx/patches-3.3/007-MIPS-BCM63XX-remove-SPI2-register.patch83
-rw-r--r--target/linux/brcm63xx/patches-3.3/008-MIPS-BCM63XX-define-internal-registers-offsets-of-th.patch140
-rw-r--r--target/linux/brcm63xx/patches-3.3/009-MIPS-BCM63XX-add-stub-to-register-the-SPI-platform-d.patch243
-rw-r--r--target/linux/brcm63xx/patches-3.3/010-MIPS-BCM63XX-make-board-setup-code-register-the-spi-.patch29
-rw-r--r--target/linux/brcm63xx/patches-3.3/011-spi-add-Broadcom-BCM63xx-SPI-controller-driver.patch532
-rw-r--r--target/linux/brcm63xx/patches-3.3/012-mtd-bcm63xxpart-handle-Broadcom-partition-order.patch101
-rw-r--r--target/linux/brcm63xx/patches-3.3/013-spi-bcm63xx-convert-to-the-pump-message-infrastructu.patch289
-rw-r--r--target/linux/brcm63xx/patches-3.3/014-spi-bcm63xx-don-t-use-the-stopping-state.patch68
-rw-r--r--target/linux/brcm63xx/patches-3.3/015-spi-bcm63xx-set-master-driver-mode_bits.patch24
-rw-r--r--target/linux/brcm63xx/patches-3.3/016-spi-bcm63xx-fix-bcm6348-38.patch128
-rw-r--r--target/linux/brcm63xx/patches-3.3/017-MIPS-BCM63XX-fix-BCM6368-IPSec-clock-bit.patch23
-rw-r--r--target/linux/brcm63xx/patches-3.3/018-MIPS-BCM63XX-add-support-for-ipsec-clock.patch48
-rw-r--r--target/linux/brcm63xx/patches-3.3/019-MIPS-BCM63XX-add-RNG-peripheral-definitions.patch113
-rw-r--r--target/linux/brcm63xx/patches-3.3/020-MIPS-BCM63XX-add-RNG-driver-platform_device-stub.patch71
-rw-r--r--target/linux/brcm63xx/patches-3.3/021-hw_random-add-Broadcom-BCM63xx-RNG-driver.patch229
-rw-r--r--target/linux/brcm63xx/patches-3.3/022-MIPS-BCM63XX-Move-flash-registration-out-of-board_bc.patch202
-rw-r--r--target/linux/brcm63xx/patches-3.3/023-MIPS-BCM63XX-Add-flash-type-detection.patch137
-rw-r--r--target/linux/brcm63xx/patches-3.3/024-MIPS-BCM63XX-Use-the-Chip-ID-register-for-identifyin.patch53
-rw-r--r--target/linux/brcm63xx/patches-3.3/025-MIPS-BCM63XX-Add-basic-BCM6328-support.patch590
-rw-r--r--target/linux/brcm63xx/patches-3.3/026-MIPS-BCM63XX-Move-the-PCI-initialization-into-its-ow.patch61
-rw-r--r--target/linux/brcm63xx/patches-3.3/027-MIPS-BCM63XX-Add-PCIe-Support-for-BCM6328.patch427
-rw-r--r--target/linux/brcm63xx/patches-3.3/028-MIPS-Expose-PCIe-drivers-for-MIPS.patch28
-rw-r--r--target/linux/brcm63xx/patches-3.3/030-MIPS-BCM63XX-Fix-BCM6345-clock-bits.patch34
-rw-r--r--target/linux/brcm63xx/patches-3.3/100-MIPS-BCM63XX-add-missing-include-for-bcm63xx_gpio.h.patch41
-rw-r--r--target/linux/brcm63xx/patches-3.3/101-MTD-bcm63xxpart-remove-unused-variable.patch41
-rw-r--r--target/linux/brcm63xx/patches-3.3/102-MTD-bcm63xxpart-merge-sparelen-calculation.patch33
-rw-r--r--target/linux/brcm63xx/patches-3.3/103-MTD-bcm63xxpart-make-fixed-part-length-calculation-m.patch49
-rw-r--r--target/linux/brcm63xx/patches-3.3/104-MTD-bcm63xxpart-move-the-last-curpart-to-its-correct.patch26
-rw-r--r--target/linux/brcm63xx/patches-3.3/105-MTD-bcm63xxpart-use-correct-printk-format-for-partit.patch27
-rw-r--r--target/linux/brcm63xx/patches-3.3/106-bcm63xx_watchdog_section_mismatch.patch20
-rw-r--r--target/linux/brcm63xx/patches-3.3/107-MIPS-BCM63XX-Fix-USB-IRQ-definitions-for-6328.patch26
-rw-r--r--target/linux/brcm63xx/patches-3.3/108-BCM63XX-Add-register-definitions-for-USBD-depen.patch62
-rw-r--r--target/linux/brcm63xx/patches-3.3/109-bcm63xx-fix-transfer-bits_per_words-check.patch29
-rw-r--r--target/linux/brcm63xx/patches-3.3/110-spi-bcm63xx-fix-multi-transfer-messages.patch279
-rw-r--r--target/linux/brcm63xx/patches-3.3/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch38
-rw-r--r--target/linux/brcm63xx/patches-3.3/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch23
-rw-r--r--target/linux/brcm63xx/patches-3.3/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch92
-rw-r--r--target/linux/brcm63xx/patches-3.3/300-reset_buttons.patch116
-rw-r--r--target/linux/brcm63xx/patches-3.3/301-led_count.patch41
-rw-r--r--target/linux/brcm63xx/patches-3.3/302-extended-platform-devices.patch25
-rw-r--r--target/linux/brcm63xx/patches-3.3/303-spi-board-info.patch33
-rw-r--r--target/linux/brcm63xx/patches-3.3/304-boardid_fixup.patch61
-rw-r--r--target/linux/brcm63xx/patches-3.3/305-missing_ext_irq_bits.patch96
-rw-r--r--target/linux/brcm63xx/patches-3.3/306-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch23
-rw-r--r--target/linux/brcm63xx/patches-3.3/307-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch22
-rw-r--r--target/linux/brcm63xx/patches-3.3/308-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch48
-rw-r--r--target/linux/brcm63xx/patches-3.3/309-MIPS-BCM63XX-add-HSSPI-register-definitions.patch211
-rw-r--r--target/linux/brcm63xx/patches-3.3/310-board_leds_naming.patch267
-rw-r--r--target/linux/brcm63xx/patches-3.3/311-cfe_version_mod.patch26
-rw-r--r--target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6362-support.patch497
-rw-r--r--target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch110
-rw-r--r--target/linux/brcm63xx/patches-3.3/400-ohci-add-driver-for-bcm63xx-integrated-controller.patch234
-rw-r--r--target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch143
-rw-r--r--target/linux/brcm63xx/patches-3.3/402-ehci-add-driver-for-bcm63xx-integrated-controller.patch241
-rw-r--r--target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch125
-rw-r--r--target/linux/brcm63xx/patches-3.3/404-bcm963xx_flashmap.patch65
-rw-r--r--target/linux/brcm63xx/patches-3.3/405-bcm963xx_real_rootfs_length.patch27
-rw-r--r--target/linux/brcm63xx/patches-3.3/406_bcm63xx_enet_vlan_incoming_fixed.patch11
-rw-r--r--target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch22
-rw-r--r--target/linux/brcm63xx/patches-3.3/410-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch169
-rw-r--r--target/linux/brcm63xx/patches-3.3/411-bcm63xx_enet-implement-reset_autoneg-ethtool.patch40
-rw-r--r--target/linux/brcm63xx/patches-3.3/412-bcm63xx_enet-use-resource_size.patch69
-rw-r--r--target/linux/brcm63xx/patches-3.3/413-bcm63xx_enet-disable-clock-when-uninitializing-devic.patch20
-rw-r--r--target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch381
-rw-r--r--target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch1490
-rw-r--r--target/linux/brcm63xx/patches-3.3/416-bcm63xx_enet-reset-port-link-state-in-bcm_enetsw_ope.patch28
-rw-r--r--target/linux/brcm63xx/patches-3.3/417-bcm63xx_enet-don-t-overwrite-settings-when-setting-d.patch20
-rw-r--r--target/linux/brcm63xx/patches-3.3/418-bcm63xx_enet-store-the-number-of-ports-instead-of-ha.patch98
-rw-r--r--target/linux/brcm63xx/patches-3.3/419-bcm63xx_enet-store-is_sw-in-a-variable-instead-of-ch.patch73
-rw-r--r--target/linux/brcm63xx/patches-3.3/420-BCM63XX-allow-enetsw-without-tx-irq.patch69
-rw-r--r--target/linux/brcm63xx/patches-3.3/421-BCM63XX-use-port-id-for-deciding-external-phy.patch87
-rw-r--r--target/linux/brcm63xx/patches-3.3/422-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch53
-rw-r--r--target/linux/brcm63xx/patches-3.3/423-bcm63xx_enet-fix-lockup-on-BCM6328.patch93
-rw-r--r--target/linux/brcm63xx/patches-3.3/424-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch103
-rw-r--r--target/linux/brcm63xx/patches-3.3/425-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch128
-rw-r--r--target/linux/brcm63xx/patches-3.3/426-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch481
-rw-r--r--target/linux/brcm63xx/patches-3.3/427-MIPS-BCM63XX-Register-SPI-flash-if-present.patch102
-rw-r--r--target/linux/brcm63xx/patches-3.3/428-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch50
-rw-r--r--target/linux/brcm63xx/patches-3.3/428-MIPS-BCM63XX-move-nvram-related-functions-into-their.patch351
-rw-r--r--target/linux/brcm63xx/patches-3.3/429-MIPS-BCM63XX-export-PSI-size-from-nvram.patch44
-rw-r--r--target/linux/brcm63xx/patches-3.3/430-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch29
-rw-r--r--target/linux/brcm63xx/patches-3.3/431-MTD-physmap-allow-passing-pp_data.patch41
-rw-r--r--target/linux/brcm63xx/patches-3.3/432-BCM63XX-allow-providing-fixup-data-in-board-data.patch81
-rw-r--r--target/linux/brcm63xx/patches-3.3/433-MTD-m25p80-allow-passing-pp_data.patch40
-rw-r--r--target/linux/brcm63xx/patches-3.3/434-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch122
-rw-r--r--target/linux/brcm63xx/patches-3.3/435-BCM63XX-add-a-fixup-for-ath9k-devices.patch227
-rw-r--r--target/linux/brcm63xx/patches-3.3/436-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch118
-rw-r--r--target/linux/brcm63xx/patches-3.3/437-MIPS-BCM63XX-pass-caldata-info-to-flash.patch82
-rw-r--r--target/linux/brcm63xx/patches-3.3/438-MIPS-BCM63XX-enable-USB-for-BCM6328.patch60
-rw-r--r--target/linux/brcm63xx/patches-3.3/439-MIPS-BCM63XX-wire-up-the-HS-SPI-controller-for-BCM63.patch56
-rw-r--r--target/linux/brcm63xx/patches-3.3/440-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch101
-rw-r--r--target/linux/brcm63xx/patches-3.3/441-MIPS-BCM63XX-enable-USB-for-BCM6362.patch84
-rw-r--r--target/linux/brcm63xx/patches-3.3/442-MIPS-BCM63XX-enable-enetsw-for-BCM6362.patch77
-rw-r--r--target/linux/brcm63xx/patches-3.3/443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch795
-rw-r--r--target/linux/brcm63xx/patches-3.3/444-BCM63XX-add-endian-check-for-ath9k.patch51
-rw-r--r--target/linux/brcm63xx/patches-3.3/445-BCM63XX-add-led-pin-for-ath9k.patch49
-rw-r--r--target/linux/brcm63xx/patches-3.3/446-BCM63XX-add-a-fixup-for-rt2x00-devices.patch188
-rw-r--r--target/linux/brcm63xx/patches-3.3/500-board-D4PW.patch65
-rw-r--r--target/linux/brcm63xx/patches-3.3/501-board-NB4.patch640
-rw-r--r--target/linux/brcm63xx/patches-3.3/502-board-96338W2_E7T.patch49
-rw-r--r--target/linux/brcm63xx/patches-3.3/503-board-CPVA642.patch107
-rw-r--r--target/linux/brcm63xx/patches-3.3/504-board_dsl_274xb_rev_c.patch70
-rw-r--r--target/linux/brcm63xx/patches-3.3/505-board_spw500v.patch78
-rw-r--r--target/linux/brcm63xx/patches-3.3/506-board_gw6200_gw6000.patch124
-rw-r--r--target/linux/brcm63xx/patches-3.3/507-board-MAGIC.patch87
-rw-r--r--target/linux/brcm63xx/patches-3.3/508-board_hw553.patch91
-rw-r--r--target/linux/brcm63xx/patches-3.3/509-board_rta1320_16m.patch54
-rw-r--r--target/linux/brcm63xx/patches-3.3/510-board_spw303v.patch83
-rw-r--r--target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch122
-rw-r--r--target/linux/brcm63xx/patches-3.3/512-board_BTV2110.patch73
-rw-r--r--target/linux/brcm63xx/patches-3.3/513-board_livebox.patch391
-rw-r--r--target/linux/brcm63xx/patches-3.3/514-board_ct536_ct5621.patch60
-rw-r--r--target/linux/brcm63xx/patches-3.3/515-board_DWV-S0_fixes.patch19
-rw-r--r--target/linux/brcm63xx/patches-3.3/516-board_96348A-122.patch78
-rw-r--r--target/linux/brcm63xx/patches-3.3/517-RTA1205W_16_uart_fixes.patch10
-rw-r--r--target/linux/brcm63xx/patches-3.3/519_board_CPVA502plus.patch55
-rw-r--r--target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch128
-rw-r--r--target/linux/brcm63xx/patches-3.3/521-bcm63xx-add-support-for-96368MVNgr-board.patch92
-rw-r--r--target/linux/brcm63xx/patches-3.3/522-MIPS-BCM63XX-add-96328avng-reference-board.patch102
-rw-r--r--target/linux/brcm63xx/patches-3.3/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch96
-rw-r--r--target/linux/brcm63xx/patches-3.3/524-board_dsl_274xb_rev_f.patch132
-rw-r--r--target/linux/brcm63xx/patches-3.3/525-board_96348w3.patch68
-rw-r--r--target/linux/brcm63xx/patches-3.3/526-board_CT6373-1.patch136
-rw-r--r--target/linux/brcm63xx/patches-3.3/527-board_dva-g3810bn-tl-1.patch82
-rw-r--r--target/linux/brcm63xx/patches-3.3/528-board_nb6.patch146
-rw-r--r--target/linux/brcm63xx/patches-3.3/529-board_fast2604.patch66
-rw-r--r--target/linux/brcm63xx/patches-3.3/530-board_963281T_TEF.patch136
-rw-r--r--target/linux/brcm63xx/patches-3.3/531-board_96328A-1441N1.patch89
-rw-r--r--target/linux/brcm63xx/patches-3.3/532-board_96328a-1241N.patch83
-rw-r--r--target/linux/brcm63xx/patches-3.3/550-alice_gate2_leds.patch102
-rw-r--r--target/linux/brcm63xx/patches-3.3/551-96348gw_a_leds.patch22
-rw-r--r--target/linux/brcm63xx/patches-3.3/552-board_96348gw-10_reset_button.patch20
-rw-r--r--target/linux/brcm63xx/patches-3.3/553-board_rta770bw.patch64
-rw-r--r--target/linux/brcm63xx/patches-3.3/800-wl_exports.patch34
-rw-r--r--target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch27
-rw-r--r--target/linux/brcm63xx/patches-3.3/802-rtl8367r_fix_RGMII_support.patch30
143 files changed, 0 insertions, 17373 deletions
diff --git a/target/linux/brcm63xx/config-3.3 b/target/linux/brcm63xx/config-3.3
deleted file mode 100644
index b5e1231b9f..0000000000
--- a/target/linux/brcm63xx/config-3.3
+++ /dev/null
@@ -1,159 +0,0 @@
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_DISCARD_MEMBLOCK=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_AUDIT=y
-CONFIG_AUDIT_GENERIC=y
-CONFIG_BCM63XX=y
-CONFIG_BCM63XX_CPU_6328=y
-CONFIG_BCM63XX_CPU_6338=y
-CONFIG_BCM63XX_CPU_6345=y
-CONFIG_BCM63XX_CPU_6348=y
-CONFIG_BCM63XX_CPU_6358=y
-CONFIG_BCM63XX_CPU_6362=y
-CONFIG_BCM63XX_CPU_6368=y
-CONFIG_BCM63XX_ENET=y
-CONFIG_BCM63XX_PHY=y
-CONFIG_BCM63XX_WDT=y
-CONFIG_BOARD_BCM963XX=y
-# CONFIG_BOARD_LIVEBOX is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CEVT_R4K_LIB=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_CMDLINE_OVERRIDE is not set
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-CONFIG_CPU_MIPSR1=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_CRAMFS=y
-CONFIG_CSRC_R4K=y
-CONFIG_CSRC_R4K_LIB=y
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_ELF_CORE=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_74X164=y
-CONFIG_GPIO_DEVICE=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_WORK=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_BCM63XX=y
-CONFIG_HZ=250
-# CONFIG_HZ_100 is not set
-CONFIG_HZ_250=y
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_KEXEC=y
-CONFIG_LEDS_GPIO=y
-CONFIG_M25PXX_USE_FAST_READ=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIPS=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-# CONFIG_MIPS_MACHINE is not set
-CONFIG_MIPS_MT_DISABLED=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MTD_BCM63XX_PARTS=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_BE_BYTE_SWAP=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-# CONFIG_MTD_CFI_NOSWAP is not set
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI=y
-# CONFIG_PCIEAER is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_PREEMPT_RCU is not set
-CONFIG_RELAY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_RTL8367_PHY=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250 is not set
-CONFIG_SERIAL_BCM63XX=y
-CONFIG_SERIAL_BCM63XX_CONSOLE=y
-CONFIG_SPI=y
-# CONFIG_SPI_BCM63XX is not set
-CONFIG_SPI_BCM63XX_HSSPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SQUASHFS_EMBEDDED=y
-CONFIG_SSB=y
-CONFIG_SSB_B43_PCI_BRIDGE=y
-CONFIG_SSB_BLOCKIO=y
-# CONFIG_SSB_DRIVER_MIPS is not set
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCIHOST_POSSIBLE=y
-CONFIG_SSB_SPROM=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/brcm63xx/patches-3.3/001-MIPS-BCM63XX-fix-platform_devices-id.patch b/target/linux/brcm63xx/patches-3.3/001-MIPS-BCM63XX-fix-platform_devices-id.patch
deleted file mode 100644
index f83490e6cc..0000000000
--- a/target/linux/brcm63xx/patches-3.3/001-MIPS-BCM63XX-fix-platform_devices-id.patch
+++ /dev/null
@@ -1,36 +0,0 @@
-From cbcfe65e357666106c3c6250baf9c5ce33f3e3e3 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 25 Jan 2012 17:39:53 +0100
-Subject: [PATCH 03/63] MIPS: BCM63XX: fix platform_devices id
-
-There is only one watchdog and VoIP DSP platform devices per board, use
--1 as the platform_device id accordingly.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/dev-dsp.c | 2 +-
- arch/mips/bcm63xx/dev-wdt.c | 2 +-
- 2 files changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-dsp.c
-+++ b/arch/mips/bcm63xx/dev-dsp.c
-@@ -31,7 +31,7 @@ static struct resource voip_dsp_resource
-
- static struct platform_device bcm63xx_voip_dsp_device = {
- .name = "bcm63xx-voip-dsp",
-- .id = 0,
-+ .id = -1,
- .num_resources = ARRAY_SIZE(voip_dsp_resources),
- .resource = voip_dsp_resources,
- };
---- a/arch/mips/bcm63xx/dev-wdt.c
-+++ b/arch/mips/bcm63xx/dev-wdt.c
-@@ -21,7 +21,7 @@ static struct resource wdt_resources[] =
-
- static struct platform_device bcm63xx_wdt_device = {
- .name = "bcm63xx-wdt",
-- .id = 0,
-+ .id = -1,
- .num_resources = ARRAY_SIZE(wdt_resources),
- .resource = wdt_resources,
- };
diff --git a/target/linux/brcm63xx/patches-3.3/002-MIPS-BCM63XX-be-consistent-in-clock-bits-enable-nami.patch b/target/linux/brcm63xx/patches-3.3/002-MIPS-BCM63XX-be-consistent-in-clock-bits-enable-nami.patch
deleted file mode 100644
index 439d11ea1d..0000000000
--- a/target/linux/brcm63xx/patches-3.3/002-MIPS-BCM63XX-be-consistent-in-clock-bits-enable-nami.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From db1cc4ee366bf0528fcb8b4afa65dec915d98889 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 25 Jan 2012 17:39:55 +0100
-Subject: [PATCH 04/63] MIPS: BCM63XX: be consistent in clock bits enable naming
-
-Remove the _CLK suffix from the BCM6368 clock bits definitions to be
-consistent with what is already present.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c | 6 ++--
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 36 ++++++++++----------
- 2 files changed, 21 insertions(+), 21 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -120,7 +120,7 @@ static void enetsw_set(struct clk *clk,
- {
- if (!BCMCPU_IS_6368())
- return;
-- bcm_hwclock_set(CKCTL_6368_ROBOSW_CLK_EN |
-+ bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
- CKCTL_6368_SWPKT_USB_EN |
- CKCTL_6368_SWPKT_SAR_EN, enable);
- if (enable) {
-@@ -163,7 +163,7 @@ static void usbh_set(struct clk *clk, in
- if (BCMCPU_IS_6348())
- bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
- else if (BCMCPU_IS_6368())
-- bcm_hwclock_set(CKCTL_6368_USBH_CLK_EN, enable);
-+ bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
- }
-
- static struct clk clk_usbh = {
-@@ -199,7 +199,7 @@ static void xtm_set(struct clk *clk, int
- if (!BCMCPU_IS_6368())
- return;
-
-- bcm_hwclock_set(CKCTL_6368_SAR_CLK_EN |
-+ bcm_hwclock_set(CKCTL_6368_SAR_EN |
- CKCTL_6368_SWPKT_SAR_EN, enable);
-
- if (enable) {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -90,29 +90,29 @@
- #define CKCTL_6368_PHYMIPS_EN (1 << 6)
- #define CKCTL_6368_SWPKT_USB_EN (1 << 7)
- #define CKCTL_6368_SWPKT_SAR_EN (1 << 8)
--#define CKCTL_6368_SPI_CLK_EN (1 << 9)
--#define CKCTL_6368_USBD_CLK_EN (1 << 10)
--#define CKCTL_6368_SAR_CLK_EN (1 << 11)
--#define CKCTL_6368_ROBOSW_CLK_EN (1 << 12)
--#define CKCTL_6368_UTOPIA_CLK_EN (1 << 13)
--#define CKCTL_6368_PCM_CLK_EN (1 << 14)
--#define CKCTL_6368_USBH_CLK_EN (1 << 15)
-+#define CKCTL_6368_SPI_EN (1 << 9)
-+#define CKCTL_6368_USBD_EN (1 << 10)
-+#define CKCTL_6368_SAR_EN (1 << 11)
-+#define CKCTL_6368_ROBOSW_EN (1 << 12)
-+#define CKCTL_6368_UTOPIA_EN (1 << 13)
-+#define CKCTL_6368_PCM_EN (1 << 14)
-+#define CKCTL_6368_USBH_EN (1 << 15)
- #define CKCTL_6368_DISABLE_GLESS_EN (1 << 16)
--#define CKCTL_6368_NAND_CLK_EN (1 << 17)
--#define CKCTL_6368_IPSEC_CLK_EN (1 << 17)
-+#define CKCTL_6368_NAND_EN (1 << 17)
-+#define CKCTL_6368_IPSEC_EN (1 << 17)
-
- #define CKCTL_6368_ALL_SAFE_EN (CKCTL_6368_SWPKT_USB_EN | \
- CKCTL_6368_SWPKT_SAR_EN | \
-- CKCTL_6368_SPI_CLK_EN | \
-- CKCTL_6368_USBD_CLK_EN | \
-- CKCTL_6368_SAR_CLK_EN | \
-- CKCTL_6368_ROBOSW_CLK_EN | \
-- CKCTL_6368_UTOPIA_CLK_EN | \
-- CKCTL_6368_PCM_CLK_EN | \
-- CKCTL_6368_USBH_CLK_EN | \
-+ CKCTL_6368_SPI_EN | \
-+ CKCTL_6368_USBD_EN | \
-+ CKCTL_6368_SAR_EN | \
-+ CKCTL_6368_ROBOSW_EN | \
-+ CKCTL_6368_UTOPIA_EN | \
-+ CKCTL_6368_PCM_EN | \
-+ CKCTL_6368_USBH_EN | \
- CKCTL_6368_DISABLE_GLESS_EN | \
-- CKCTL_6368_NAND_CLK_EN | \
-- CKCTL_6368_IPSEC_CLK_EN)
-+ CKCTL_6368_NAND_EN | \
-+ CKCTL_6368_IPSEC_EN)
-
- /* System PLL Control register */
- #define PERF_SYS_PLL_CTL_REG 0x8
diff --git a/target/linux/brcm63xx/patches-3.3/003-MIPS-BCM63XX-add-IRQ_SPI-and-CPU-specific-SPI-IRQ-va.patch b/target/linux/brcm63xx/patches-3.3/003-MIPS-BCM63XX-add-IRQ_SPI-and-CPU-specific-SPI-IRQ-va.patch
deleted file mode 100644
index b4c787c52a..0000000000
--- a/target/linux/brcm63xx/patches-3.3/003-MIPS-BCM63XX-add-IRQ_SPI-and-CPU-specific-SPI-IRQ-va.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 04456614952a9a848192253439b4e361f0321cb5 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 25 Jan 2012 17:39:51 +0100
-Subject: [PATCH 05/63] MIPS: BCM63XX: add IRQ_SPI and CPU specific SPI IRQ values
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 7 +++++++
- 1 files changed, 7 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -478,6 +478,7 @@ static inline unsigned long bcm63xx_regs
- */
- enum bcm63xx_irq {
- IRQ_TIMER = 0,
-+ IRQ_SPI,
- IRQ_UART0,
- IRQ_UART1,
- IRQ_DSL,
-@@ -509,6 +510,7 @@ enum bcm63xx_irq {
- * 6338 irqs
- */
- #define BCM_6338_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
-+#define BCM_6338_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
- #define BCM_6338_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
- #define BCM_6338_UART1_IRQ 0
- #define BCM_6338_DSL_IRQ (IRQ_INTERNAL_BASE + 5)
-@@ -539,6 +541,7 @@ enum bcm63xx_irq {
- * 6345 irqs
- */
- #define BCM_6345_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
-+#define BCM_6345_SPI_IRQ 0
- #define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
- #define BCM_6345_UART1_IRQ 0
- #define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3)
-@@ -569,6 +572,7 @@ enum bcm63xx_irq {
- * 6348 irqs
- */
- #define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
-+#define BCM_6348_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
- #define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
- #define BCM_6348_UART1_IRQ 0
- #define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
-@@ -599,6 +603,7 @@ enum bcm63xx_irq {
- * 6358 irqs
- */
- #define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
-+#define BCM_6358_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
- #define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
- #define BCM_6358_UART1_IRQ (IRQ_INTERNAL_BASE + 3)
- #define BCM_6358_DSL_IRQ (IRQ_INTERNAL_BASE + 29)
-@@ -638,6 +643,7 @@ enum bcm63xx_irq {
- #define BCM_6368_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32)
-
- #define BCM_6368_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
-+#define BCM_6368_SPI_IRQ (IRQ_INTERNAL_BASE + 1)
- #define BCM_6368_UART0_IRQ (IRQ_INTERNAL_BASE + 2)
- #define BCM_6368_UART1_IRQ (IRQ_INTERNAL_BASE + 3)
- #define BCM_6368_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
-@@ -677,6 +683,7 @@ extern const int *bcm63xx_irqs;
-
- #define __GEN_CPU_IRQ_TABLE(__cpu) \
- [IRQ_TIMER] = BCM_## __cpu ##_TIMER_IRQ, \
-+ [IRQ_SPI] = BCM_## __cpu ##_SPI_IRQ, \
- [IRQ_UART0] = BCM_## __cpu ##_UART0_IRQ, \
- [IRQ_UART1] = BCM_## __cpu ##_UART1_IRQ, \
- [IRQ_DSL] = BCM_## __cpu ##_DSL_IRQ, \
diff --git a/target/linux/brcm63xx/patches-3.3/004-MIPS-BCM63XX-define-BCM6358-SPI-base-address.patch b/target/linux/brcm63xx/patches-3.3/004-MIPS-BCM63XX-define-BCM6358-SPI-base-address.patch
deleted file mode 100644
index 0c314da743..0000000000
--- a/target/linux/brcm63xx/patches-3.3/004-MIPS-BCM63XX-define-BCM6358-SPI-base-address.patch
+++ /dev/null
@@ -1,21 +0,0 @@
-From bfd78dda2ad5afb4434ebe99c05528614065bdb1 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 25 Jan 2012 17:39:56 +0100
-Subject: [PATCH 06/63] MIPS: BCM63XX: define BCM6358 SPI base address
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -289,7 +289,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_UART0_BASE (0xfffe0100)
- #define BCM_6358_UART1_BASE (0xfffe0120)
- #define BCM_6358_GPIO_BASE (0xfffe0080)
--#define BCM_6358_SPI_BASE (0xdeadbeef)
-+#define BCM_6358_SPI_BASE (0xfffe0800)
- #define BCM_6358_SPI2_BASE (0xfffe0800)
- #define BCM_6358_UDC0_BASE (0xfffe0800)
- #define BCM_6358_OHCI0_BASE (0xfffe1400)
diff --git a/target/linux/brcm63xx/patches-3.3/005-MIPS-BCM63XX-add-BCM6368-SPI-clock-mask.patch b/target/linux/brcm63xx/patches-3.3/005-MIPS-BCM63XX-add-BCM6368-SPI-clock-mask.patch
deleted file mode 100644
index b7fac84480..0000000000
--- a/target/linux/brcm63xx/patches-3.3/005-MIPS-BCM63XX-add-BCM6368-SPI-clock-mask.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 9b990ee00f70bdd6a731dbe264d5acb453a6c5e2 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 25 Jan 2012 17:39:57 +0100
-Subject: [PATCH 07/63] MIPS: BCM63XX: add BCM6368 SPI clock mask
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/clk.c | 6 ++++--
- 1 files changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -181,9 +181,11 @@ static void spi_set(struct clk *clk, int
- mask = CKCTL_6338_SPI_EN;
- else if (BCMCPU_IS_6348())
- mask = CKCTL_6348_SPI_EN;
-- else
-- /* BCMCPU_IS_6358 */
-+ else if (BCMCPU_IS_6358())
- mask = CKCTL_6358_SPI_EN;
-+ else
-+ /* BCMCPU_IS_6368 */
-+ mask = CKCTL_6368_SPI_EN;
- bcm_hwclock_set(mask, enable);
- }
-
diff --git a/target/linux/brcm63xx/patches-3.3/006-MIPS-BCM63XX-define-SPI-register-sizes.patch b/target/linux/brcm63xx/patches-3.3/006-MIPS-BCM63XX-define-SPI-register-sizes.patch
deleted file mode 100644
index 0eab43a186..0000000000
--- a/target/linux/brcm63xx/patches-3.3/006-MIPS-BCM63XX-define-SPI-register-sizes.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 16ba44545156e4e7cc1e812ad93e562ce92fd74c Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 25 Jan 2012 17:40:00 +0100
-Subject: [PATCH 08/63] MIPS: BCM63XX: define SPI register sizes.
-
-There are two distinct sizes for the SPI register depending on the SoC
-generation (6338 & 6348 vs 6358 & 6368).
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 4 ++++
- 1 files changed, 4 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -135,6 +135,10 @@ enum bcm63xx_regs_set {
- #define RSET_DSL_LMEM_SIZE (64 * 1024 * 4)
- #define RSET_DSL_SIZE 4096
- #define RSET_WDT_SIZE 12
-+#define BCM_6338_RSET_SPI_SIZE 64
-+#define BCM_6348_RSET_SPI_SIZE 64
-+#define BCM_6358_RSET_SPI_SIZE 1804
-+#define BCM_6368_RSET_SPI_SIZE 1804
- #define RSET_ENET_SIZE 2048
- #define RSET_ENETDMA_SIZE 2048
- #define RSET_ENETSW_SIZE 65536
diff --git a/target/linux/brcm63xx/patches-3.3/007-MIPS-BCM63XX-remove-SPI2-register.patch b/target/linux/brcm63xx/patches-3.3/007-MIPS-BCM63XX-remove-SPI2-register.patch
deleted file mode 100644
index cafef10dbb..0000000000
--- a/target/linux/brcm63xx/patches-3.3/007-MIPS-BCM63XX-remove-SPI2-register.patch
+++ /dev/null
@@ -1,83 +0,0 @@
-From 32511e7dfab9b9cabe2772e3f5430559294a8d1c Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 25 Jan 2012 17:40:01 +0100
-Subject: [PATCH 09/63] MIPS: BCM63XX: remove SPI2 register
-
-This register was introduced with the support of the BCM6368 CPU in the idea
-that its internal layout was different from the other CPUs SPI controller.
-The controller is actually the same as the one present on BCM6358 so we can
-remove this register and use the usual SPI register instead.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 10 +---------
- 1 files changed, 1 insertions(+), 9 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -102,7 +102,6 @@ enum bcm63xx_regs_set {
- RSET_UART1,
- RSET_GPIO,
- RSET_SPI,
-- RSET_SPI2,
- RSET_UDC0,
- RSET_OHCI0,
- RSET_OHCI_PRIV,
-@@ -166,7 +165,6 @@ enum bcm63xx_regs_set {
- #define BCM_6338_UART1_BASE (0xdeadbeef)
- #define BCM_6338_GPIO_BASE (0xfffe0400)
- #define BCM_6338_SPI_BASE (0xfffe0c00)
--#define BCM_6338_SPI2_BASE (0xdeadbeef)
- #define BCM_6338_UDC0_BASE (0xdeadbeef)
- #define BCM_6338_USBDMA_BASE (0xfffe2400)
- #define BCM_6338_OHCI0_BASE (0xdeadbeef)
-@@ -210,7 +208,6 @@ enum bcm63xx_regs_set {
- #define BCM_6345_UART1_BASE (0xdeadbeef)
- #define BCM_6345_GPIO_BASE (0xfffe0400)
- #define BCM_6345_SPI_BASE (0xdeadbeef)
--#define BCM_6345_SPI2_BASE (0xdeadbeef)
- #define BCM_6345_UDC0_BASE (0xdeadbeef)
- #define BCM_6345_USBDMA_BASE (0xfffe2800)
- #define BCM_6345_ENET0_BASE (0xfffe1800)
-@@ -253,7 +250,6 @@ enum bcm63xx_regs_set {
- #define BCM_6348_UART1_BASE (0xdeadbeef)
- #define BCM_6348_GPIO_BASE (0xfffe0400)
- #define BCM_6348_SPI_BASE (0xfffe0c00)
--#define BCM_6348_SPI2_BASE (0xdeadbeef)
- #define BCM_6348_UDC0_BASE (0xfffe1000)
- #define BCM_6348_OHCI0_BASE (0xfffe1b00)
- #define BCM_6348_OHCI_PRIV_BASE (0xfffe1c00)
-@@ -294,7 +290,6 @@ enum bcm63xx_regs_set {
- #define BCM_6358_UART1_BASE (0xfffe0120)
- #define BCM_6358_GPIO_BASE (0xfffe0080)
- #define BCM_6358_SPI_BASE (0xfffe0800)
--#define BCM_6358_SPI2_BASE (0xfffe0800)
- #define BCM_6358_UDC0_BASE (0xfffe0800)
- #define BCM_6358_OHCI0_BASE (0xfffe1400)
- #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef)
-@@ -335,8 +330,7 @@ enum bcm63xx_regs_set {
- #define BCM_6368_UART0_BASE (0xb0000100)
- #define BCM_6368_UART1_BASE (0xb0000120)
- #define BCM_6368_GPIO_BASE (0xb0000080)
--#define BCM_6368_SPI_BASE (0xdeadbeef)
--#define BCM_6368_SPI2_BASE (0xb0000800)
-+#define BCM_6368_SPI_BASE (0xb0000800)
- #define BCM_6368_UDC0_BASE (0xdeadbeef)
- #define BCM_6368_OHCI0_BASE (0xb0001600)
- #define BCM_6368_OHCI_PRIV_BASE (0xdeadbeef)
-@@ -383,7 +377,6 @@ extern const unsigned long *bcm63xx_regs
- __GEN_RSET_BASE(__cpu, UART1) \
- __GEN_RSET_BASE(__cpu, GPIO) \
- __GEN_RSET_BASE(__cpu, SPI) \
-- __GEN_RSET_BASE(__cpu, SPI2) \
- __GEN_RSET_BASE(__cpu, UDC0) \
- __GEN_RSET_BASE(__cpu, OHCI0) \
- __GEN_RSET_BASE(__cpu, OHCI_PRIV) \
-@@ -422,7 +415,6 @@ extern const unsigned long *bcm63xx_regs
- [RSET_UART1] = BCM_## __cpu ##_UART1_BASE, \
- [RSET_GPIO] = BCM_## __cpu ##_GPIO_BASE, \
- [RSET_SPI] = BCM_## __cpu ##_SPI_BASE, \
-- [RSET_SPI2] = BCM_## __cpu ##_SPI2_BASE, \
- [RSET_UDC0] = BCM_## __cpu ##_UDC0_BASE, \
- [RSET_OHCI0] = BCM_## __cpu ##_OHCI0_BASE, \
- [RSET_OHCI_PRIV] = BCM_## __cpu ##_OHCI_PRIV_BASE, \
diff --git a/target/linux/brcm63xx/patches-3.3/008-MIPS-BCM63XX-define-internal-registers-offsets-of-th.patch b/target/linux/brcm63xx/patches-3.3/008-MIPS-BCM63XX-define-internal-registers-offsets-of-th.patch
deleted file mode 100644
index d3968fc815..0000000000
--- a/target/linux/brcm63xx/patches-3.3/008-MIPS-BCM63XX-define-internal-registers-offsets-of-th.patch
+++ /dev/null
@@ -1,140 +0,0 @@
-From 81f9e7d6aa1dde65483387ba9e9823ef44f90435 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 25 Jan 2012 17:40:03 +0100
-Subject: [PATCH 10/63] MIPS: BCM63XX: define internal registers offsets of the SPI controller
-
-BCM6338, BCM6348, BCM6358 and BCM6368 basically use the same SPI controller
-though the internal registers are shuffled, which still allows a common
-driver to drive that IP block.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 119 +++++++++++++++++++++
- 1 files changed, 119 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -973,4 +973,123 @@
- #define M2M_SRCID_REG(x) ((x) * 0x40 + 0x14)
- #define M2M_DSTID_REG(x) ((x) * 0x40 + 0x18)
-
-+/*************************************************************************
-+ * _REG relative to RSET_SPI
-+ *************************************************************************/
-+
-+/* BCM 6338 SPI core */
-+#define SPI_6338_CMD 0x00 /* 16-bits register */
-+#define SPI_6338_INT_STATUS 0x02
-+#define SPI_6338_INT_MASK_ST 0x03
-+#define SPI_6338_INT_MASK 0x04
-+#define SPI_6338_ST 0x05
-+#define SPI_6338_CLK_CFG 0x06
-+#define SPI_6338_FILL_BYTE 0x07
-+#define SPI_6338_MSG_TAIL 0x09
-+#define SPI_6338_RX_TAIL 0x0b
-+#define SPI_6338_MSG_CTL 0x40
-+#define SPI_6338_MSG_DATA 0x41
-+#define SPI_6338_MSG_DATA_SIZE 0x3f
-+#define SPI_6338_RX_DATA 0x80
-+#define SPI_6338_RX_DATA_SIZE 0x3f
-+
-+/* BCM 6348 SPI core */
-+#define SPI_6348_CMD 0x00 /* 16-bits register */
-+#define SPI_6348_INT_STATUS 0x02
-+#define SPI_6348_INT_MASK_ST 0x03
-+#define SPI_6348_INT_MASK 0x04
-+#define SPI_6348_ST 0x05
-+#define SPI_6348_CLK_CFG 0x06
-+#define SPI_6348_FILL_BYTE 0x07
-+#define SPI_6348_MSG_TAIL 0x09
-+#define SPI_6348_RX_TAIL 0x0b
-+#define SPI_6348_MSG_CTL 0x40
-+#define SPI_6348_MSG_DATA 0x41
-+#define SPI_6348_MSG_DATA_SIZE 0x3f
-+#define SPI_6348_RX_DATA 0x80
-+#define SPI_6348_RX_DATA_SIZE 0x3f
-+
-+/* BCM 6358 SPI core */
-+#define SPI_6358_MSG_CTL 0x00 /* 16-bits register */
-+#define SPI_6358_MSG_DATA 0x02
-+#define SPI_6358_MSG_DATA_SIZE 0x21e
-+#define SPI_6358_RX_DATA 0x400
-+#define SPI_6358_RX_DATA_SIZE 0x220
-+#define SPI_6358_CMD 0x700 /* 16-bits register */
-+#define SPI_6358_INT_STATUS 0x702
-+#define SPI_6358_INT_MASK_ST 0x703
-+#define SPI_6358_INT_MASK 0x704
-+#define SPI_6358_ST 0x705
-+#define SPI_6358_CLK_CFG 0x706
-+#define SPI_6358_FILL_BYTE 0x707
-+#define SPI_6358_MSG_TAIL 0x709
-+#define SPI_6358_RX_TAIL 0x70B
-+
-+/* BCM 6358 SPI core */
-+#define SPI_6368_MSG_CTL 0x00 /* 16-bits register */
-+#define SPI_6368_MSG_DATA 0x02
-+#define SPI_6368_MSG_DATA_SIZE 0x21e
-+#define SPI_6368_RX_DATA 0x400
-+#define SPI_6368_RX_DATA_SIZE 0x220
-+#define SPI_6368_CMD 0x700 /* 16-bits register */
-+#define SPI_6368_INT_STATUS 0x702
-+#define SPI_6368_INT_MASK_ST 0x703
-+#define SPI_6368_INT_MASK 0x704
-+#define SPI_6368_ST 0x705
-+#define SPI_6368_CLK_CFG 0x706
-+#define SPI_6368_FILL_BYTE 0x707
-+#define SPI_6368_MSG_TAIL 0x709
-+#define SPI_6368_RX_TAIL 0x70B
-+
-+/* Shared SPI definitions */
-+
-+/* Message configuration */
-+#define SPI_FD_RW 0x00
-+#define SPI_HD_W 0x01
-+#define SPI_HD_R 0x02
-+#define SPI_BYTE_CNT_SHIFT 0
-+#define SPI_MSG_TYPE_SHIFT 14
-+
-+/* Command */
-+#define SPI_CMD_NOOP 0x00
-+#define SPI_CMD_SOFT_RESET 0x01
-+#define SPI_CMD_HARD_RESET 0x02
-+#define SPI_CMD_START_IMMEDIATE 0x03
-+#define SPI_CMD_COMMAND_SHIFT 0
-+#define SPI_CMD_COMMAND_MASK 0x000f
-+#define SPI_CMD_DEVICE_ID_SHIFT 4
-+#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8
-+#define SPI_CMD_ONE_BYTE_SHIFT 11
-+#define SPI_CMD_ONE_WIRE_SHIFT 12
-+#define SPI_DEV_ID_0 0
-+#define SPI_DEV_ID_1 1
-+#define SPI_DEV_ID_2 2
-+#define SPI_DEV_ID_3 3
-+
-+/* Interrupt mask */
-+#define SPI_INTR_CMD_DONE 0x01
-+#define SPI_INTR_RX_OVERFLOW 0x02
-+#define SPI_INTR_TX_UNDERFLOW 0x04
-+#define SPI_INTR_TX_OVERFLOW 0x08
-+#define SPI_INTR_RX_UNDERFLOW 0x10
-+#define SPI_INTR_CLEAR_ALL 0x1f
-+
-+/* Status */
-+#define SPI_RX_EMPTY 0x02
-+#define SPI_CMD_BUSY 0x04
-+#define SPI_SERIAL_BUSY 0x08
-+
-+/* Clock configuration */
-+#define SPI_CLK_20MHZ 0x00
-+#define SPI_CLK_0_391MHZ 0x01
-+#define SPI_CLK_0_781MHZ 0x02 /* default */
-+#define SPI_CLK_1_563MHZ 0x03
-+#define SPI_CLK_3_125MHZ 0x04
-+#define SPI_CLK_6_250MHZ 0x05
-+#define SPI_CLK_12_50MHZ 0x06
-+#define SPI_CLK_MASK 0x07
-+#define SPI_SSOFFTIME_MASK 0x38
-+#define SPI_SSOFFTIME_SHIFT 3
-+#define SPI_BYTE_SWAP 0x80
-+
- #endif /* BCM63XX_REGS_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/009-MIPS-BCM63XX-add-stub-to-register-the-SPI-platform-d.patch b/target/linux/brcm63xx/patches-3.3/009-MIPS-BCM63XX-add-stub-to-register-the-SPI-platform-d.patch
deleted file mode 100644
index a46041fd6b..0000000000
--- a/target/linux/brcm63xx/patches-3.3/009-MIPS-BCM63XX-add-stub-to-register-the-SPI-platform-d.patch
+++ /dev/null
@@ -1,243 +0,0 @@
-From af84327888c7081662a6b949754fc54d32a50503 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 25 Jan 2012 17:40:04 +0100
-Subject: [PATCH 11/63] MIPS: BCM63XX: add stub to register the SPI platform driver
-
-This patch adds the necessary stub to register the SPI platform driver.
-Since the registers are shuffled between the 4 BCM63xx CPUs supported by
-this SPI driver we also need to generate the internal register layout and
-export this layout for the driver to use it properly.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/Makefile | 3 +-
- arch/mips/bcm63xx/dev-spi.c | 119 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_spi.h | 89 +++++++++++++++
- 3 files changed, 210 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-spi.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,5 +1,6 @@
- obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-- dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o dev-wdt.o
-+ dev-dsp.o dev-enet.o dev-pcmcia.o dev-spi.o dev-uart.o \
-+ dev-wdt.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
- obj-y += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -0,0 +1,119 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/export.h>
-+#include <linux/platform_device.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_regs.h>
-+
-+#ifdef BCMCPU_RUNTIME_DETECT
-+/*
-+ * register offsets
-+ */
-+static const unsigned long bcm6338_regs_spi[] = {
-+ __GEN_SPI_REGS_TABLE(6338)
-+};
-+
-+static const unsigned long bcm6348_regs_spi[] = {
-+ __GEN_SPI_REGS_TABLE(6348)
-+};
-+
-+static const unsigned long bcm6358_regs_spi[] = {
-+ __GEN_SPI_REGS_TABLE(6358)
-+};
-+
-+static const unsigned long bcm6368_regs_spi[] = {
-+ __GEN_SPI_REGS_TABLE(6368)
-+};
-+
-+const unsigned long *bcm63xx_regs_spi;
-+EXPORT_SYMBOL(bcm63xx_regs_spi);
-+
-+static __init void bcm63xx_spi_regs_init(void)
-+{
-+ if (BCMCPU_IS_6338())
-+ bcm63xx_regs_spi = bcm6338_regs_spi;
-+ if (BCMCPU_IS_6348())
-+ bcm63xx_regs_spi = bcm6348_regs_spi;
-+ if (BCMCPU_IS_6358())
-+ bcm63xx_regs_spi = bcm6358_regs_spi;
-+ if (BCMCPU_IS_6368())
-+ bcm63xx_regs_spi = bcm6368_regs_spi;
-+}
-+#else
-+static __init void bcm63xx_spi_regs_init(void) { }
-+#endif
-+
-+static struct resource spi_resources[] = {
-+ {
-+ .start = -1, /* filled at runtime */
-+ .end = -1, /* filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = -1, /* filled at runtime */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct bcm63xx_spi_pdata spi_pdata = {
-+ .bus_num = 0,
-+ .num_chipselect = 8,
-+};
-+
-+static struct platform_device bcm63xx_spi_device = {
-+ .name = "bcm63xx-spi",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(spi_resources),
-+ .resource = spi_resources,
-+ .dev = {
-+ .platform_data = &spi_pdata,
-+ },
-+};
-+
-+int __init bcm63xx_spi_register(void)
-+{
-+ struct clk *periph_clk;
-+
-+ if (BCMCPU_IS_6345())
-+ return -ENODEV;
-+
-+ periph_clk = clk_get(NULL, "periph");
-+ if (IS_ERR(periph_clk)) {
-+ pr_err("unable to get periph clock\n");
-+ return -ENODEV;
-+ }
-+
-+ /* Set bus frequency */
-+ spi_pdata.speed_hz = clk_get_rate(periph_clk);
-+
-+ spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
-+ spi_resources[0].end = spi_resources[0].start;
-+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
-+
-+ if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
-+ spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1;
-+ spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE;
-+ }
-+
-+ if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
-+ spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
-+ spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
-+ }
-+
-+ bcm63xx_spi_regs_init();
-+
-+ return platform_device_register(&bcm63xx_spi_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-@@ -0,0 +1,89 @@
-+#ifndef BCM63XX_DEV_SPI_H
-+#define BCM63XX_DEV_SPI_H
-+
-+#include <linux/types.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_regs.h>
-+
-+int __init bcm63xx_spi_register(void);
-+
-+struct bcm63xx_spi_pdata {
-+ unsigned int fifo_size;
-+ int bus_num;
-+ int num_chipselect;
-+ u32 speed_hz;
-+};
-+
-+enum bcm63xx_regs_spi {
-+ SPI_CMD,
-+ SPI_INT_STATUS,
-+ SPI_INT_MASK_ST,
-+ SPI_INT_MASK,
-+ SPI_ST,
-+ SPI_CLK_CFG,
-+ SPI_FILL_BYTE,
-+ SPI_MSG_TAIL,
-+ SPI_RX_TAIL,
-+ SPI_MSG_CTL,
-+ SPI_MSG_DATA,
-+ SPI_RX_DATA,
-+};
-+
-+#define __GEN_SPI_RSET_BASE(__cpu, __rset) \
-+ case SPI_## __rset: \
-+ return SPI_## __cpu ##_## __rset;
-+
-+#define __GEN_SPI_RSET(__cpu) \
-+ switch (reg) { \
-+ __GEN_SPI_RSET_BASE(__cpu, CMD) \
-+ __GEN_SPI_RSET_BASE(__cpu, INT_STATUS) \
-+ __GEN_SPI_RSET_BASE(__cpu, INT_MASK_ST) \
-+ __GEN_SPI_RSET_BASE(__cpu, INT_MASK) \
-+ __GEN_SPI_RSET_BASE(__cpu, ST) \
-+ __GEN_SPI_RSET_BASE(__cpu, CLK_CFG) \
-+ __GEN_SPI_RSET_BASE(__cpu, FILL_BYTE) \
-+ __GEN_SPI_RSET_BASE(__cpu, MSG_TAIL) \
-+ __GEN_SPI_RSET_BASE(__cpu, RX_TAIL) \
-+ __GEN_SPI_RSET_BASE(__cpu, MSG_CTL) \
-+ __GEN_SPI_RSET_BASE(__cpu, MSG_DATA) \
-+ __GEN_SPI_RSET_BASE(__cpu, RX_DATA) \
-+ }
-+
-+#define __GEN_SPI_REGS_TABLE(__cpu) \
-+ [SPI_CMD] = SPI_## __cpu ##_CMD, \
-+ [SPI_INT_STATUS] = SPI_## __cpu ##_INT_STATUS, \
-+ [SPI_INT_MASK_ST] = SPI_## __cpu ##_INT_MASK_ST, \
-+ [SPI_INT_MASK] = SPI_## __cpu ##_INT_MASK, \
-+ [SPI_ST] = SPI_## __cpu ##_ST, \
-+ [SPI_CLK_CFG] = SPI_## __cpu ##_CLK_CFG, \
-+ [SPI_FILL_BYTE] = SPI_## __cpu ##_FILL_BYTE, \
-+ [SPI_MSG_TAIL] = SPI_## __cpu ##_MSG_TAIL, \
-+ [SPI_RX_TAIL] = SPI_## __cpu ##_RX_TAIL, \
-+ [SPI_MSG_CTL] = SPI_## __cpu ##_MSG_CTL, \
-+ [SPI_MSG_DATA] = SPI_## __cpu ##_MSG_DATA, \
-+ [SPI_RX_DATA] = SPI_## __cpu ##_RX_DATA,
-+
-+static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg)
-+{
-+#ifdef BCMCPU_RUNTIME_DETECT
-+ extern const unsigned long *bcm63xx_regs_spi;
-+
-+ return bcm63xx_regs_spi[reg];
-+#else
-+#ifdef CONFIG_BCM63XX_CPU_6338
-+ __GEN_SPI_RSET(6338)
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+ __GEN_SPI_RSET(6348)
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6358
-+ __GEN_SPI_RSET(6358)
-+#endif
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+ __GEN_SPI_RSET(6368)
-+#endif
-+#endif
-+ return 0;
-+}
-+
-+#endif /* BCM63XX_DEV_SPI_H */
diff --git a/target/linux/brcm63xx/patches-3.3/010-MIPS-BCM63XX-make-board-setup-code-register-the-spi-.patch b/target/linux/brcm63xx/patches-3.3/010-MIPS-BCM63XX-make-board-setup-code-register-the-spi-.patch
deleted file mode 100644
index 516569679c..0000000000
--- a/target/linux/brcm63xx/patches-3.3/010-MIPS-BCM63XX-make-board-setup-code-register-the-spi-.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From fab0cbda27ab2400d6a461bf144007a0d5337527 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 25 Jan 2012 17:40:05 +0100
-Subject: [PATCH 12/63] MIPS: BCM63XX: make board setup code register the spi platform device
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 3 +++
- 1 files changed, 3 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -25,6 +25,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_spi.h>
- #include <board_bcm963xx.h>
-
- #define PFX "board_bcm963xx: "
-@@ -890,6 +891,8 @@ int __init board_register_devices(void)
- }
- #endif
-
-+ bcm63xx_spi_register();
-+
- /* read base address of boot chip select (0) */
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
diff --git a/target/linux/brcm63xx/patches-3.3/011-spi-add-Broadcom-BCM63xx-SPI-controller-driver.patch b/target/linux/brcm63xx/patches-3.3/011-spi-add-Broadcom-BCM63xx-SPI-controller-driver.patch
deleted file mode 100644
index e4939599a8..0000000000
--- a/target/linux/brcm63xx/patches-3.3/011-spi-add-Broadcom-BCM63xx-SPI-controller-driver.patch
+++ /dev/null
@@ -1,532 +0,0 @@
-From 5f592b818a2c5731bb12137e7cffc3aa6e24ee5a Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 1 Feb 2012 09:14:09 +0000
-Subject: [PATCH 13/63] spi: add Broadcom BCM63xx SPI controller driver
-
-This patch adds support for the SPI controller found on the Broadcom BCM63xx
-SoCs.
-
-Signed-off-by: Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
-Acked-by: Grant Likely <grant.likely@secretlab.ca>
----
- drivers/spi/Kconfig | 6 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-bcm63xx.c | 486 +++++++++++++++++++++++++++++++++++++++++++++
- 3 files changed, 493 insertions(+), 0 deletions(-)
- create mode 100644 drivers/spi/spi-bcm63xx.c
-
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -94,6 +94,12 @@ config SPI_AU1550
- If you say yes to this option, support will be included for the
- PSC SPI controller found on Au1550, Au1200 and Au1300 series.
-
-+config SPI_BCM63XX
-+ tristate "Broadcom BCM63xx SPI controller"
-+ depends on BCM63XX
-+ help
-+ Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
-+
- config SPI_BITBANG
- tristate "Utilities for Bitbanging SPI masters"
- help
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -14,6 +14,7 @@ obj-$(CONFIG_SPI_ALTERA) += spi-altera.
- obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
- obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
- obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
-+obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
- obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o
- obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
- obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o
---- /dev/null
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -0,0 +1,486 @@
-+/*
-+ * Broadcom BCM63xx SPI controller support
-+ *
-+ * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the
-+ * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/interrupt.h>
-+#include <linux/spi/spi.h>
-+#include <linux/completion.h>
-+#include <linux/err.h>
-+
-+#include <bcm63xx_dev_spi.h>
-+
-+#define PFX KBUILD_MODNAME
-+#define DRV_VER "0.1.2"
-+
-+struct bcm63xx_spi {
-+ spinlock_t lock;
-+ int stopping;
-+ struct completion done;
-+
-+ void __iomem *regs;
-+ int irq;
-+
-+ /* Platform data */
-+ u32 speed_hz;
-+ unsigned fifo_size;
-+
-+ /* Data buffers */
-+ const unsigned char *tx_ptr;
-+ unsigned char *rx_ptr;
-+
-+ /* data iomem */
-+ u8 __iomem *tx_io;
-+ const u8 __iomem *rx_io;
-+
-+ int remaining_bytes;
-+
-+ struct clk *clk;
-+ struct platform_device *pdev;
-+};
-+
-+static inline u8 bcm_spi_readb(struct bcm63xx_spi *bs,
-+ unsigned int offset)
-+{
-+ return bcm_readb(bs->regs + bcm63xx_spireg(offset));
-+}
-+
-+static inline u16 bcm_spi_readw(struct bcm63xx_spi *bs,
-+ unsigned int offset)
-+{
-+ return bcm_readw(bs->regs + bcm63xx_spireg(offset));
-+}
-+
-+static inline void bcm_spi_writeb(struct bcm63xx_spi *bs,
-+ u8 value, unsigned int offset)
-+{
-+ bcm_writeb(value, bs->regs + bcm63xx_spireg(offset));
-+}
-+
-+static inline void bcm_spi_writew(struct bcm63xx_spi *bs,
-+ u16 value, unsigned int offset)
-+{
-+ bcm_writew(value, bs->regs + bcm63xx_spireg(offset));
-+}
-+
-+static const unsigned bcm63xx_spi_freq_table[SPI_CLK_MASK][2] = {
-+ { 20000000, SPI_CLK_20MHZ },
-+ { 12500000, SPI_CLK_12_50MHZ },
-+ { 6250000, SPI_CLK_6_250MHZ },
-+ { 3125000, SPI_CLK_3_125MHZ },
-+ { 1563000, SPI_CLK_1_563MHZ },
-+ { 781000, SPI_CLK_0_781MHZ },
-+ { 391000, SPI_CLK_0_391MHZ }
-+};
-+
-+static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+ u8 bits_per_word;
-+ u8 clk_cfg, reg;
-+ u32 hz;
-+ int i;
-+
-+ bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
-+ hz = (t) ? t->speed_hz : spi->max_speed_hz;
-+ if (bits_per_word != 8) {
-+ dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
-+ __func__, bits_per_word);
-+ return -EINVAL;
-+ }
-+
-+ if (spi->chip_select > spi->master->num_chipselect) {
-+ dev_err(&spi->dev, "%s, unsupported slave %d\n",
-+ __func__, spi->chip_select);
-+ return -EINVAL;
-+ }
-+
-+ /* Find the closest clock configuration */
-+ for (i = 0; i < SPI_CLK_MASK; i++) {
-+ if (hz >= bcm63xx_spi_freq_table[i][0]) {
-+ clk_cfg = bcm63xx_spi_freq_table[i][1];
-+ break;
-+ }
-+ }
-+
-+ /* No matching configuration found, default to lowest */
-+ if (i == SPI_CLK_MASK)
-+ clk_cfg = SPI_CLK_0_391MHZ;
-+
-+ /* clear existing clock configuration bits of the register */
-+ reg = bcm_spi_readb(bs, SPI_CLK_CFG);
-+ reg &= ~SPI_CLK_MASK;
-+ reg |= clk_cfg;
-+
-+ bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
-+ dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
-+ clk_cfg, hz);
-+
-+ return 0;
-+}
-+
-+/* the spi->mode bits understood by this driver: */
-+#define MODEBITS (SPI_CPOL | SPI_CPHA)
-+
-+static int bcm63xx_spi_setup(struct spi_device *spi)
-+{
-+ struct bcm63xx_spi *bs;
-+ int ret;
-+
-+ bs = spi_master_get_devdata(spi->master);
-+
-+ if (bs->stopping)
-+ return -ESHUTDOWN;
-+
-+ if (!spi->bits_per_word)
-+ spi->bits_per_word = 8;
-+
-+ if (spi->mode & ~MODEBITS) {
-+ dev_err(&spi->dev, "%s, unsupported mode bits %x\n",
-+ __func__, spi->mode & ~MODEBITS);
-+ return -EINVAL;
-+ }
-+
-+ ret = bcm63xx_spi_setup_transfer(spi, NULL);
-+ if (ret < 0) {
-+ dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
-+ spi->mode & ~MODEBITS);
-+ return ret;
-+ }
-+
-+ dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n",
-+ __func__, spi->mode & MODEBITS, spi->bits_per_word, 0);
-+
-+ return 0;
-+}
-+
-+/* Fill the TX FIFO with as many bytes as possible */
-+static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
-+{
-+ u8 size;
-+
-+ /* Fill the Tx FIFO with as many bytes as possible */
-+ size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes :
-+ bs->fifo_size;
-+ memcpy_toio(bs->tx_io, bs->tx_ptr, size);
-+ bs->remaining_bytes -= size;
-+}
-+
-+static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-+{
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+ u16 msg_ctl;
-+ u16 cmd;
-+
-+ dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
-+ t->tx_buf, t->rx_buf, t->len);
-+
-+ /* Transmitter is inhibited */
-+ bs->tx_ptr = t->tx_buf;
-+ bs->rx_ptr = t->rx_buf;
-+ init_completion(&bs->done);
-+
-+ if (t->tx_buf) {
-+ bs->remaining_bytes = t->len;
-+ bcm63xx_spi_fill_tx_fifo(bs);
-+ }
-+
-+ /* Enable the command done interrupt which
-+ * we use to determine completion of a command */
-+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
-+
-+ /* Fill in the Message control register */
-+ msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
-+
-+ if (t->rx_buf && t->tx_buf)
-+ msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
-+ else if (t->rx_buf)
-+ msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT);
-+ else if (t->tx_buf)
-+ msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT);
-+
-+ bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
-+
-+ /* Issue the transfer */
-+ cmd = SPI_CMD_START_IMMEDIATE;
-+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-+ cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
-+ bcm_spi_writew(bs, cmd, SPI_CMD);
-+ wait_for_completion(&bs->done);
-+
-+ /* Disable the CMD_DONE interrupt */
-+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-+
-+ return t->len - bs->remaining_bytes;
-+}
-+
-+static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
-+{
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+ struct spi_transfer *t;
-+ int ret = 0;
-+
-+ if (unlikely(list_empty(&m->transfers)))
-+ return -EINVAL;
-+
-+ if (bs->stopping)
-+ return -ESHUTDOWN;
-+
-+ list_for_each_entry(t, &m->transfers, transfer_list) {
-+ ret += bcm63xx_txrx_bufs(spi, t);
-+ }
-+
-+ m->complete(m->context);
-+
-+ return ret;
-+}
-+
-+/* This driver supports single master mode only. Hence
-+ * CMD_DONE is the only interrupt we care about
-+ */
-+static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id)
-+{
-+ struct spi_master *master = (struct spi_master *)dev_id;
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-+ u8 intr;
-+ u16 cmd;
-+
-+ /* Read interupts and clear them immediately */
-+ intr = bcm_spi_readb(bs, SPI_INT_STATUS);
-+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
-+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-+
-+ /* A tansfer completed */
-+ if (intr & SPI_INTR_CMD_DONE) {
-+ u8 rx_tail;
-+
-+ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-+
-+ /* Read out all the data */
-+ if (rx_tail)
-+ memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
-+
-+ /* See if there is more data to send */
-+ if (bs->remaining_bytes > 0) {
-+ bcm63xx_spi_fill_tx_fifo(bs);
-+
-+ /* Start the transfer */
-+ bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
-+ SPI_MSG_CTL);
-+ cmd = bcm_spi_readw(bs, SPI_CMD);
-+ cmd |= SPI_CMD_START_IMMEDIATE;
-+ cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
-+ bcm_spi_writew(bs, cmd, SPI_CMD);
-+ } else {
-+ complete(&bs->done);
-+ }
-+ }
-+
-+ return IRQ_HANDLED;
-+}
-+
-+
-+static int __devinit bcm63xx_spi_probe(struct platform_device *pdev)
-+{
-+ struct resource *r;
-+ struct device *dev = &pdev->dev;
-+ struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data;
-+ int irq;
-+ struct spi_master *master;
-+ struct clk *clk;
-+ struct bcm63xx_spi *bs;
-+ int ret;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!r) {
-+ dev_err(dev, "no iomem\n");
-+ ret = -ENXIO;
-+ goto out;
-+ }
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(dev, "no irq\n");
-+ ret = -ENXIO;
-+ goto out;
-+ }
-+
-+ clk = clk_get(dev, "spi");
-+ if (IS_ERR(clk)) {
-+ dev_err(dev, "no clock for device\n");
-+ ret = PTR_ERR(clk);
-+ goto out;
-+ }
-+
-+ master = spi_alloc_master(dev, sizeof(*bs));
-+ if (!master) {
-+ dev_err(dev, "out of memory\n");
-+ ret = -ENOMEM;
-+ goto out_clk;
-+ }
-+
-+ bs = spi_master_get_devdata(master);
-+ init_completion(&bs->done);
-+
-+ platform_set_drvdata(pdev, master);
-+ bs->pdev = pdev;
-+
-+ if (!devm_request_mem_region(&pdev->dev, r->start,
-+ resource_size(r), PFX)) {
-+ dev_err(dev, "iomem request failed\n");
-+ ret = -ENXIO;
-+ goto out_err;
-+ }
-+
-+ bs->regs = devm_ioremap_nocache(&pdev->dev, r->start,
-+ resource_size(r));
-+ if (!bs->regs) {
-+ dev_err(dev, "unable to ioremap regs\n");
-+ ret = -ENOMEM;
-+ goto out_err;
-+ }
-+
-+ bs->irq = irq;
-+ bs->clk = clk;
-+ bs->fifo_size = pdata->fifo_size;
-+
-+ ret = devm_request_irq(&pdev->dev, irq, bcm63xx_spi_interrupt, 0,
-+ pdev->name, master);
-+ if (ret) {
-+ dev_err(dev, "unable to request irq\n");
-+ goto out_err;
-+ }
-+
-+ master->bus_num = pdata->bus_num;
-+ master->num_chipselect = pdata->num_chipselect;
-+ master->setup = bcm63xx_spi_setup;
-+ master->transfer = bcm63xx_transfer;
-+ bs->speed_hz = pdata->speed_hz;
-+ bs->stopping = 0;
-+ bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
-+ bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
-+ spin_lock_init(&bs->lock);
-+
-+ /* Initialize hardware */
-+ clk_enable(bs->clk);
-+ bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
-+
-+ /* register and we are done */
-+ ret = spi_register_master(master);
-+ if (ret) {
-+ dev_err(dev, "spi register failed\n");
-+ goto out_clk_disable;
-+ }
-+
-+ dev_info(dev, "at 0x%08x (irq %d, FIFOs size %d) v%s\n",
-+ r->start, irq, bs->fifo_size, DRV_VER);
-+
-+ return 0;
-+
-+out_clk_disable:
-+ clk_disable(clk);
-+out_err:
-+ platform_set_drvdata(pdev, NULL);
-+ spi_master_put(master);
-+out_clk:
-+ clk_put(clk);
-+out:
-+ return ret;
-+}
-+
-+static int __devexit bcm63xx_spi_remove(struct platform_device *pdev)
-+{
-+ struct spi_master *master = platform_get_drvdata(pdev);
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-+
-+ /* reset spi block */
-+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-+ spin_lock(&bs->lock);
-+ bs->stopping = 1;
-+
-+ /* HW shutdown */
-+ clk_disable(bs->clk);
-+ clk_put(bs->clk);
-+
-+ spin_unlock(&bs->lock);
-+ platform_set_drvdata(pdev, 0);
-+ spi_unregister_master(master);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int bcm63xx_spi_suspend(struct device *dev)
-+{
-+ struct spi_master *master =
-+ platform_get_drvdata(to_platform_device(dev));
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-+
-+ clk_disable(bs->clk);
-+
-+ return 0;
-+}
-+
-+static int bcm63xx_spi_resume(struct device *dev)
-+{
-+ struct spi_master *master =
-+ platform_get_drvdata(to_platform_device(dev));
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-+
-+ clk_enable(bs->clk);
-+
-+ return 0;
-+}
-+
-+static const struct dev_pm_ops bcm63xx_spi_pm_ops = {
-+ .suspend = bcm63xx_spi_suspend,
-+ .resume = bcm63xx_spi_resume,
-+};
-+
-+#define BCM63XX_SPI_PM_OPS (&bcm63xx_spi_pm_ops)
-+#else
-+#define BCM63XX_SPI_PM_OPS NULL
-+#endif
-+
-+static struct platform_driver bcm63xx_spi_driver = {
-+ .driver = {
-+ .name = "bcm63xx-spi",
-+ .owner = THIS_MODULE,
-+ .pm = BCM63XX_SPI_PM_OPS,
-+ },
-+ .probe = bcm63xx_spi_probe,
-+ .remove = __devexit_p(bcm63xx_spi_remove),
-+};
-+
-+module_platform_driver(bcm63xx_spi_driver);
-+
-+MODULE_ALIAS("platform:bcm63xx_spi");
-+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-+MODULE_AUTHOR("Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>");
-+MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/brcm63xx/patches-3.3/012-mtd-bcm63xxpart-handle-Broadcom-partition-order.patch b/target/linux/brcm63xx/patches-3.3/012-mtd-bcm63xxpart-handle-Broadcom-partition-order.patch
deleted file mode 100644
index b12aed6b99..0000000000
--- a/target/linux/brcm63xx/patches-3.3/012-mtd-bcm63xxpart-handle-Broadcom-partition-order.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From a73c2d9dc7ea0d14fbf48db48e783d123162f5c3 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 19 Apr 2012 13:15:57 +0200
-Subject: [PATCH] mtd: bcm63xxpart: handle Broadcom partition order
-
-The original Broadcom partition order has the root fs in front of the
-kernel, which resulted in miscalculated partition sizes.
-Detect when such an image is on the flash and also reorder the partitions
-accordingly.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
-Acked-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
----
- drivers/mtd/bcm63xxpart.c | 41 ++++++++++++++++++++++++++++++-----------
- 1 file changed, 30 insertions(+), 11 deletions(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -4,7 +4,7 @@
- * Copyright © 2006-2008 Florian Fainelli <florian@openwrt.org>
- * Mike Albon <malbon@openwrt.org>
- * Copyright © 2009-2010 Daniel Dickinson <openwrt@cshore.neomailbox.net>
-- * Copyright © 2011 Jonas Gorski <jonas.gorski@gmail.com>
-+ * Copyright © 2011-2012 Jonas Gorski <jonas.gorski@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
-@@ -82,6 +82,7 @@ static int bcm63xx_parse_cfe_partitions(
- int namelen = 0;
- int i;
- u32 computed_crc;
-+ bool rootfs_first = false;
-
- if (bcm63xx_detect_cfe(master))
- return -EINVAL;
-@@ -109,6 +110,7 @@ static int bcm63xx_parse_cfe_partitions(
- char *boardid = &(buf->board_id[0]);
- char *tagversion = &(buf->tag_version[0]);
-
-+ sscanf(buf->flash_image_start, "%u", &rootfsaddr);
- sscanf(buf->kernel_address, "%u", &kerneladdr);
- sscanf(buf->kernel_length, "%u", &kernellen);
- sscanf(buf->total_length, "%u", &totallen);
-@@ -117,10 +119,19 @@ static int bcm63xx_parse_cfe_partitions(
- tagversion, boardid);
-
- kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
-- rootfsaddr = kerneladdr + kernellen;
-+ rootfsaddr = rootfsaddr - BCM63XX_EXTENDED_SIZE;
- spareaddr = roundup(totallen, master->erasesize) + cfelen;
- sparelen = master->size - spareaddr - nvramlen;
-- rootfslen = spareaddr - rootfsaddr;
-+
-+ if (rootfsaddr < kerneladdr) {
-+ /* default Broadcom layout */
-+ rootfslen = kerneladdr - rootfsaddr;
-+ rootfs_first = true;
-+ } else {
-+ /* OpenWrt layout */
-+ rootfsaddr = kerneladdr + kernellen;
-+ rootfslen = spareaddr - rootfsaddr;
-+ }
- } else {
- pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n",
- buf->header_crc, computed_crc);
-@@ -156,18 +167,26 @@ static int bcm63xx_parse_cfe_partitions(
- curpart++;
-
- if (kernellen > 0) {
-- parts[curpart].name = "kernel";
-- parts[curpart].offset = kerneladdr;
-- parts[curpart].size = kernellen;
-+ int kernelpart = curpart;
-+
-+ if (rootfslen > 0 && rootfs_first)
-+ kernelpart++;
-+ parts[kernelpart].name = "kernel";
-+ parts[kernelpart].offset = kerneladdr;
-+ parts[kernelpart].size = kernellen;
- curpart++;
- }
-
- if (rootfslen > 0) {
-- parts[curpart].name = "rootfs";
-- parts[curpart].offset = rootfsaddr;
-- parts[curpart].size = rootfslen;
-- if (sparelen > 0)
-- parts[curpart].size += sparelen;
-+ int rootfspart = curpart;
-+
-+ if (kernellen > 0 && rootfs_first)
-+ rootfspart--;
-+ parts[rootfspart].name = "rootfs";
-+ parts[rootfspart].offset = rootfsaddr;
-+ parts[rootfspart].size = rootfslen;
-+ if (sparelen > 0 && !rootfs_first)
-+ parts[rootfspart].size += sparelen;
- curpart++;
- }
-
diff --git a/target/linux/brcm63xx/patches-3.3/013-spi-bcm63xx-convert-to-the-pump-message-infrastructu.patch b/target/linux/brcm63xx/patches-3.3/013-spi-bcm63xx-convert-to-the-pump-message-infrastructu.patch
deleted file mode 100644
index 7d4d9514d9..0000000000
--- a/target/linux/brcm63xx/patches-3.3/013-spi-bcm63xx-convert-to-the-pump-message-infrastructu.patch
+++ /dev/null
@@ -1,289 +0,0 @@
-From cde4384e1037c15e5dd04c68d19c75798b6281dd Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Fri, 20 Apr 2012 15:37:33 +0200
-Subject: [PATCH] spi/bcm63xx: convert to the pump message infrastructure
-
-This patch converts the bcm63xx SPI driver to use the SPI infrastructure
-pump message queue. Since we were previously sleeping in the SPI
-driver's transfer() function (which is not allowed) this is now fixed as well.
-
-To complete that conversion a certain number of changes have been made:
-- the transfer len is split into multiple hardware transfers in case its
- size is bigger than the hardware FIFO size
-- the FIFO refill is no longer done in the interrupt context, which was a
- bad idea leading to quick interrupt handler re-entrancy
-
-Tested-by: Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
----
- drivers/spi/spi-bcm63xx.c | 149 +++++++++++++++++++++++++++------------------
- 1 file changed, 89 insertions(+), 60 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -1,7 +1,7 @@
- /*
- * Broadcom BCM63xx SPI controller support
- *
-- * Copyright (C) 2009-2011 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2009-2012 Florian Fainelli <florian@openwrt.org>
- * Copyright (C) 2010 Tanguy Bouzeloc <tanguy.bouzeloc@efixo.com>
- *
- * This program is free software; you can redistribute it and/or
-@@ -30,6 +30,8 @@
- #include <linux/spi/spi.h>
- #include <linux/completion.h>
- #include <linux/err.h>
-+#include <linux/workqueue.h>
-+#include <linux/pm_runtime.h>
-
- #include <bcm63xx_dev_spi.h>
-
-@@ -96,17 +98,12 @@ static const unsigned bcm63xx_spi_freq_t
- { 391000, SPI_CLK_0_391MHZ }
- };
-
--static int bcm63xx_spi_setup_transfer(struct spi_device *spi,
-- struct spi_transfer *t)
-+static int bcm63xx_spi_check_transfer(struct spi_device *spi,
-+ struct spi_transfer *t)
- {
-- struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
- u8 bits_per_word;
-- u8 clk_cfg, reg;
-- u32 hz;
-- int i;
-
- bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
-- hz = (t) ? t->speed_hz : spi->max_speed_hz;
- if (bits_per_word != 8) {
- dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
- __func__, bits_per_word);
-@@ -119,6 +116,19 @@ static int bcm63xx_spi_setup_transfer(st
- return -EINVAL;
- }
-
-+ return 0;
-+}
-+
-+static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
-+ struct spi_transfer *t)
-+{
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-+ u32 hz;
-+ u8 clk_cfg, reg;
-+ int i;
-+
-+ hz = (t) ? t->speed_hz : spi->max_speed_hz;
-+
- /* Find the closest clock configuration */
- for (i = 0; i < SPI_CLK_MASK; i++) {
- if (hz >= bcm63xx_spi_freq_table[i][0]) {
-@@ -139,8 +149,6 @@ static int bcm63xx_spi_setup_transfer(st
- bcm_spi_writeb(bs, reg, SPI_CLK_CFG);
- dev_dbg(&spi->dev, "Setting clock register to %02x (hz %d)\n",
- clk_cfg, hz);
--
-- return 0;
- }
-
- /* the spi->mode bits understood by this driver: */
-@@ -165,7 +173,7 @@ static int bcm63xx_spi_setup(struct spi_
- return -EINVAL;
- }
-
-- ret = bcm63xx_spi_setup_transfer(spi, NULL);
-+ ret = bcm63xx_spi_check_transfer(spi, NULL);
- if (ret < 0) {
- dev_err(&spi->dev, "setup: unsupported mode bits %x\n",
- spi->mode & ~MODEBITS);
-@@ -190,28 +198,29 @@ static void bcm63xx_spi_fill_tx_fifo(str
- bs->remaining_bytes -= size;
- }
-
--static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t)
-+static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
-+ struct spi_transfer *t)
- {
- struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
- u16 msg_ctl;
- u16 cmd;
-
-+ /* Disable the CMD_DONE interrupt */
-+ bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-+
- dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
- t->tx_buf, t->rx_buf, t->len);
-
- /* Transmitter is inhibited */
- bs->tx_ptr = t->tx_buf;
- bs->rx_ptr = t->rx_buf;
-- init_completion(&bs->done);
-
- if (t->tx_buf) {
- bs->remaining_bytes = t->len;
- bcm63xx_spi_fill_tx_fifo(bs);
- }
-
-- /* Enable the command done interrupt which
-- * we use to determine completion of a command */
-- bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
-+ init_completion(&bs->done);
-
- /* Fill in the Message control register */
- msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
-@@ -230,33 +239,76 @@ static int bcm63xx_txrx_bufs(struct spi_
- cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
- cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
- bcm_spi_writew(bs, cmd, SPI_CMD);
-- wait_for_completion(&bs->done);
-
-- /* Disable the CMD_DONE interrupt */
-- bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-+ /* Enable the CMD_DONE interrupt */
-+ bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
-
- return t->len - bs->remaining_bytes;
- }
-
--static int bcm63xx_transfer(struct spi_device *spi, struct spi_message *m)
-+static int bcm63xx_spi_prepare_transfer(struct spi_master *master)
- {
-- struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
-- struct spi_transfer *t;
-- int ret = 0;
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-
-- if (unlikely(list_empty(&m->transfers)))
-- return -EINVAL;
-+ pm_runtime_get_sync(&bs->pdev->dev);
-
-- if (bs->stopping)
-- return -ESHUTDOWN;
-+ return 0;
-+}
-+
-+static int bcm63xx_spi_unprepare_transfer(struct spi_master *master)
-+{
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-+
-+ pm_runtime_put(&bs->pdev->dev);
-+
-+ return 0;
-+}
-+
-+static int bcm63xx_spi_transfer_one(struct spi_master *master,
-+ struct spi_message *m)
-+{
-+ struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-+ struct spi_transfer *t;
-+ struct spi_device *spi = m->spi;
-+ int status = 0;
-+ unsigned int timeout = 0;
-
- list_for_each_entry(t, &m->transfers, transfer_list) {
-- ret += bcm63xx_txrx_bufs(spi, t);
-- }
-+ unsigned int len = t->len;
-+ u8 rx_tail;
-
-- m->complete(m->context);
-+ status = bcm63xx_spi_check_transfer(spi, t);
-+ if (status < 0)
-+ goto exit;
-+
-+ /* configure adapter for a new transfer */
-+ bcm63xx_spi_setup_transfer(spi, t);
-+
-+ while (len) {
-+ /* send the data */
-+ len -= bcm63xx_txrx_bufs(spi, t);
-+
-+ timeout = wait_for_completion_timeout(&bs->done, HZ);
-+ if (!timeout) {
-+ status = -ETIMEDOUT;
-+ goto exit;
-+ }
-+
-+ /* read out all data */
-+ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-+
-+ /* Read out all the data */
-+ if (rx_tail)
-+ memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
-+ }
-+
-+ m->actual_length += t->len;
-+ }
-+exit:
-+ m->status = status;
-+ spi_finalize_current_message(master);
-
-- return ret;
-+ return 0;
- }
-
- /* This driver supports single master mode only. Hence
-@@ -267,39 +319,15 @@ static irqreturn_t bcm63xx_spi_interrupt
- struct spi_master *master = (struct spi_master *)dev_id;
- struct bcm63xx_spi *bs = spi_master_get_devdata(master);
- u8 intr;
-- u16 cmd;
-
- /* Read interupts and clear them immediately */
- intr = bcm_spi_readb(bs, SPI_INT_STATUS);
- bcm_spi_writeb(bs, SPI_INTR_CLEAR_ALL, SPI_INT_STATUS);
- bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-
-- /* A tansfer completed */
-- if (intr & SPI_INTR_CMD_DONE) {
-- u8 rx_tail;
--
-- rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
--
-- /* Read out all the data */
-- if (rx_tail)
-- memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
--
-- /* See if there is more data to send */
-- if (bs->remaining_bytes > 0) {
-- bcm63xx_spi_fill_tx_fifo(bs);
--
-- /* Start the transfer */
-- bcm_spi_writew(bs, SPI_HD_W << SPI_MSG_TYPE_SHIFT,
-- SPI_MSG_CTL);
-- cmd = bcm_spi_readw(bs, SPI_CMD);
-- cmd |= SPI_CMD_START_IMMEDIATE;
-- cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-- bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
-- bcm_spi_writew(bs, cmd, SPI_CMD);
-- } else {
-- complete(&bs->done);
-- }
-- }
-+ /* A transfer completed */
-+ if (intr & SPI_INTR_CMD_DONE)
-+ complete(&bs->done);
-
- return IRQ_HANDLED;
- }
-@@ -345,7 +373,6 @@ static int __devinit bcm63xx_spi_probe(s
- }
-
- bs = spi_master_get_devdata(master);
-- init_completion(&bs->done);
-
- platform_set_drvdata(pdev, master);
- bs->pdev = pdev;
-@@ -379,7 +406,9 @@ static int __devinit bcm63xx_spi_probe(s
- master->bus_num = pdata->bus_num;
- master->num_chipselect = pdata->num_chipselect;
- master->setup = bcm63xx_spi_setup;
-- master->transfer = bcm63xx_transfer;
-+ master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer;
-+ master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
-+ master->transfer_one_message = bcm63xx_spi_transfer_one;
- bs->speed_hz = pdata->speed_hz;
- bs->stopping = 0;
- bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
diff --git a/target/linux/brcm63xx/patches-3.3/014-spi-bcm63xx-don-t-use-the-stopping-state.patch b/target/linux/brcm63xx/patches-3.3/014-spi-bcm63xx-don-t-use-the-stopping-state.patch
deleted file mode 100644
index 98bc90980c..0000000000
--- a/target/linux/brcm63xx/patches-3.3/014-spi-bcm63xx-don-t-use-the-stopping-state.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 1e41dc0ee2f3807328db95e4f87ff1333245190f Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Fri, 20 Apr 2012 15:37:34 +0200
-Subject: [PATCH] spi/bcm63xx: don't use the stopping state
-
-We do not need to use a flag to indicate if the master driver is stopping
-it is sufficient to perform spi master unregistering in the platform
-driver's remove function.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
----
- drivers/spi/spi-bcm63xx.c | 13 ++-----------
- 1 file changed, 2 insertions(+), 11 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -39,8 +39,6 @@
- #define DRV_VER "0.1.2"
-
- struct bcm63xx_spi {
-- spinlock_t lock;
-- int stopping;
- struct completion done;
-
- void __iomem *regs;
-@@ -161,9 +159,6 @@ static int bcm63xx_spi_setup(struct spi_
-
- bs = spi_master_get_devdata(spi->master);
-
-- if (bs->stopping)
-- return -ESHUTDOWN;
--
- if (!spi->bits_per_word)
- spi->bits_per_word = 8;
-
-@@ -410,10 +405,8 @@ static int __devinit bcm63xx_spi_probe(s
- master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
- master->transfer_one_message = bcm63xx_spi_transfer_one;
- bs->speed_hz = pdata->speed_hz;
-- bs->stopping = 0;
- bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
- bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
-- spin_lock_init(&bs->lock);
-
- /* Initialize hardware */
- clk_enable(bs->clk);
-@@ -447,18 +440,16 @@ static int __devexit bcm63xx_spi_remove(
- struct spi_master *master = platform_get_drvdata(pdev);
- struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-
-+ spi_unregister_master(master);
-+
- /* reset spi block */
- bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-- spin_lock(&bs->lock);
-- bs->stopping = 1;
-
- /* HW shutdown */
- clk_disable(bs->clk);
- clk_put(bs->clk);
-
-- spin_unlock(&bs->lock);
- platform_set_drvdata(pdev, 0);
-- spi_unregister_master(master);
-
- return 0;
- }
diff --git a/target/linux/brcm63xx/patches-3.3/015-spi-bcm63xx-set-master-driver-mode_bits.patch b/target/linux/brcm63xx/patches-3.3/015-spi-bcm63xx-set-master-driver-mode_bits.patch
deleted file mode 100644
index 8b934d002f..0000000000
--- a/target/linux/brcm63xx/patches-3.3/015-spi-bcm63xx-set-master-driver-mode_bits.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 88a3a255a510ed193bf0cc35424761c3c9247586 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Fri, 20 Apr 2012 15:37:35 +0200
-Subject: [PATCH] spi/bcm63xx: set master driver mode_bits.
-
-We were not properly advertising the MODE bits supported by this driver, fix
-that.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
----
- drivers/spi/spi-bcm63xx.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -404,6 +404,7 @@ static int __devinit bcm63xx_spi_probe(s
- master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer;
- master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
- master->transfer_one_message = bcm63xx_spi_transfer_one;
-+ master->mode_bits = MODEBITS;
- bs->speed_hz = pdata->speed_hz;
- bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
- bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
diff --git a/target/linux/brcm63xx/patches-3.3/016-spi-bcm63xx-fix-bcm6348-38.patch b/target/linux/brcm63xx/patches-3.3/016-spi-bcm63xx-fix-bcm6348-38.patch
deleted file mode 100644
index ce532571d2..0000000000
--- a/target/linux/brcm63xx/patches-3.3/016-spi-bcm63xx-fix-bcm6348-38.patch
+++ /dev/null
@@ -1,128 +0,0 @@
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -106,11 +106,15 @@ int __init bcm63xx_spi_register(void)
- if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) {
- spi_resources[0].end += BCM_6338_RSET_SPI_SIZE - 1;
- spi_pdata.fifo_size = SPI_6338_MSG_DATA_SIZE;
-+ spi_pdata.msg_type_shift = SPI_6338_MSG_TYPE_SHIFT;
-+ spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH;
- }
-
- if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
- spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
- spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
-+ spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
-+ spi_pdata.msg_ctl_width = SPI_6358_MSG_CTL_WIDTH;
- }
-
- bcm63xx_spi_regs_init();
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-@@ -9,6 +9,8 @@ int __init bcm63xx_spi_register(void);
-
- struct bcm63xx_spi_pdata {
- unsigned int fifo_size;
-+ unsigned int msg_type_shift;
-+ unsigned int msg_ctl_width;
- int bus_num;
- int num_chipselect;
- u32 speed_hz;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -987,7 +987,8 @@
- #define SPI_6338_FILL_BYTE 0x07
- #define SPI_6338_MSG_TAIL 0x09
- #define SPI_6338_RX_TAIL 0x0b
--#define SPI_6338_MSG_CTL 0x40
-+#define SPI_6338_MSG_CTL 0x40 /* 8-bits register */
-+#define SPI_6338_MSG_CTL_WIDTH 8
- #define SPI_6338_MSG_DATA 0x41
- #define SPI_6338_MSG_DATA_SIZE 0x3f
- #define SPI_6338_RX_DATA 0x80
-@@ -1003,7 +1004,8 @@
- #define SPI_6348_FILL_BYTE 0x07
- #define SPI_6348_MSG_TAIL 0x09
- #define SPI_6348_RX_TAIL 0x0b
--#define SPI_6348_MSG_CTL 0x40
-+#define SPI_6348_MSG_CTL 0x40 /* 8-bits register */
-+#define SPI_6348_MSG_CTL_WIDTH 8
- #define SPI_6348_MSG_DATA 0x41
- #define SPI_6348_MSG_DATA_SIZE 0x3f
- #define SPI_6348_RX_DATA 0x80
-@@ -1011,6 +1013,7 @@
-
- /* BCM 6358 SPI core */
- #define SPI_6358_MSG_CTL 0x00 /* 16-bits register */
-+#define SPI_6358_MSG_CTL_WIDTH 16
- #define SPI_6358_MSG_DATA 0x02
- #define SPI_6358_MSG_DATA_SIZE 0x21e
- #define SPI_6358_RX_DATA 0x400
-@@ -1027,6 +1030,7 @@
-
- /* BCM 6358 SPI core */
- #define SPI_6368_MSG_CTL 0x00 /* 16-bits register */
-+#define SPI_6368_MSG_CTL_WIDTH 16
- #define SPI_6368_MSG_DATA 0x02
- #define SPI_6368_MSG_DATA_SIZE 0x21e
- #define SPI_6368_RX_DATA 0x400
-@@ -1048,7 +1052,10 @@
- #define SPI_HD_W 0x01
- #define SPI_HD_R 0x02
- #define SPI_BYTE_CNT_SHIFT 0
--#define SPI_MSG_TYPE_SHIFT 14
-+#define SPI_6338_MSG_TYPE_SHIFT 6
-+#define SPI_6348_MSG_TYPE_SHIFT 6
-+#define SPI_6358_MSG_TYPE_SHIFT 14
-+#define SPI_6368_MSG_TYPE_SHIFT 14
-
- /* Command */
- #define SPI_CMD_NOOP 0x00
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -47,6 +47,8 @@ struct bcm63xx_spi {
- /* Platform data */
- u32 speed_hz;
- unsigned fifo_size;
-+ unsigned int msg_type_shift;
-+ unsigned int msg_ctl_width;
-
- /* Data buffers */
- const unsigned char *tx_ptr;
-@@ -221,13 +223,24 @@ static unsigned int bcm63xx_txrx_bufs(st
- msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
-
- if (t->rx_buf && t->tx_buf)
-- msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT);
-+ msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
- else if (t->rx_buf)
-- msg_ctl |= (SPI_HD_R << SPI_MSG_TYPE_SHIFT);
-+ msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
- else if (t->tx_buf)
-- msg_ctl |= (SPI_HD_W << SPI_MSG_TYPE_SHIFT);
-+ msg_ctl |= (SPI_HD_W << bs->msg_type_shift);
-
-- bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
-+ switch (bs->msg_ctl_width) {
-+ case 8:
-+ bcm_spi_writeb(bs, msg_ctl, SPI_MSG_CTL);
-+ break;
-+ case 16:
-+ bcm_spi_writew(bs, msg_ctl, SPI_MSG_CTL);
-+ break;
-+ default:
-+ dev_err(&spi->dev, "unknown MSG_CTL width: %d\n",
-+ bs->msg_ctl_width);
-+ return 0;
-+ }
-
- /* Issue the transfer */
- cmd = SPI_CMD_START_IMMEDIATE;
-@@ -406,6 +419,8 @@ static int __devinit bcm63xx_spi_probe(s
- master->transfer_one_message = bcm63xx_spi_transfer_one;
- master->mode_bits = MODEBITS;
- bs->speed_hz = pdata->speed_hz;
-+ bs->msg_type_shift = pdata->msg_type_shift;
-+ bs->msg_ctl_width = pdata->msg_ctl_width;
- bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));
- bs->rx_io = (const u8 *)(bs->regs + bcm63xx_spireg(SPI_RX_DATA));
-
diff --git a/target/linux/brcm63xx/patches-3.3/017-MIPS-BCM63XX-fix-BCM6368-IPSec-clock-bit.patch b/target/linux/brcm63xx/patches-3.3/017-MIPS-BCM63XX-fix-BCM6368-IPSec-clock-bit.patch
deleted file mode 100644
index 81f87c6100..0000000000
--- a/target/linux/brcm63xx/patches-3.3/017-MIPS-BCM63XX-fix-BCM6368-IPSec-clock-bit.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From 41ee87b6ddd525fab54e21ede506f2084bcabed3 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Wed, 25 Jan 2012 17:39:52 +0100
-Subject: [PATCH 14/63] MIPS: BCM63XX: fix BCM6368 IPSec clock bit
-
-The IPsec clock bit is 18 and not 17.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -99,7 +99,7 @@
- #define CKCTL_6368_USBH_EN (1 << 15)
- #define CKCTL_6368_DISABLE_GLESS_EN (1 << 16)
- #define CKCTL_6368_NAND_EN (1 << 17)
--#define CKCTL_6368_IPSEC_EN (1 << 17)
-+#define CKCTL_6368_IPSEC_EN (1 << 18)
-
- #define CKCTL_6368_ALL_SAFE_EN (CKCTL_6368_SWPKT_USB_EN | \
- CKCTL_6368_SWPKT_SAR_EN | \
diff --git a/target/linux/brcm63xx/patches-3.3/018-MIPS-BCM63XX-add-support-for-ipsec-clock.patch b/target/linux/brcm63xx/patches-3.3/018-MIPS-BCM63XX-add-support-for-ipsec-clock.patch
deleted file mode 100644
index 6fffc1925e..0000000000
--- a/target/linux/brcm63xx/patches-3.3/018-MIPS-BCM63XX-add-support-for-ipsec-clock.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 0fec0136456ce214ea4df6b8ff3b3728befc816a Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Tue, 31 Jan 2012 15:12:22 +0100
-Subject: [PATCH 3/6] MIPS: BCM63XX: add support for "ipsec" clock
-
-This module is only available on BCM6368 so far and does not require
-resetting the block.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: mpm@selenic.com
-Cc: herbert@gondor.apana.org.au
-Patchwork: https://patchwork.linux-mips.org/patch/3324/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm63xx/clk.c | 14 ++++++++++++++
- 1 files changed, 14 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -224,6 +224,18 @@ static struct clk clk_xtm = {
- };
-
- /*
-+ * IPsec clock
-+ */
-+static void ipsec_set(struct clk *clk, int enable)
-+{
-+ bcm_hwclock_set(CKCTL_6368_IPSEC_EN, enable);
-+}
-+
-+static struct clk clk_ipsec = {
-+ .set = ipsec_set,
-+};
-+
-+/*
- * Internal peripheral clock
- */
- static struct clk clk_periph = {
-@@ -280,6 +292,8 @@ struct clk *clk_get(struct device *dev,
- return &clk_periph;
- if (BCMCPU_IS_6358() && !strcmp(id, "pcm"))
- return &clk_pcm;
-+ if (BCMCPU_IS_6368() && !strcmp(id, "ipsec"))
-+ return &clk_ipsec;
- return ERR_PTR(-ENOENT);
- }
-
diff --git a/target/linux/brcm63xx/patches-3.3/019-MIPS-BCM63XX-add-RNG-peripheral-definitions.patch b/target/linux/brcm63xx/patches-3.3/019-MIPS-BCM63XX-add-RNG-peripheral-definitions.patch
deleted file mode 100644
index cd7bf37e9f..0000000000
--- a/target/linux/brcm63xx/patches-3.3/019-MIPS-BCM63XX-add-RNG-peripheral-definitions.patch
+++ /dev/null
@@ -1,113 +0,0 @@
-From 357761c423c0f9e4af4aafe85be7889dc36f3584 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Tue, 31 Jan 2012 15:12:23 +0100
-Subject: [PATCH 4/6] MIPS: BCM63XX: add RNG peripheral definitions
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: mpm@selenic.com
-Cc: herbert@gondor.apana.org.au
-Patchwork: https://patchwork.linux-mips.org/patch/3326/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 9 +++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 14 ++++++++++++++
- 2 files changed, 23 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -129,6 +129,7 @@ enum bcm63xx_regs_set {
- RSET_PCMDMA,
- RSET_PCMDMAC,
- RSET_PCMDMAS,
-+ RSET_RNG
- };
-
- #define RSET_DSL_LMEM_SIZE (64 * 1024 * 4)
-@@ -152,6 +153,7 @@ enum bcm63xx_regs_set {
- #define RSET_XTMDMA_SIZE 256
- #define RSET_XTMDMAC_SIZE(chans) (16 * (chans))
- #define RSET_XTMDMAS_SIZE(chans) (16 * (chans))
-+#define RSET_RNG_SIZE 20
-
- /*
- * 6338 register sets base address
-@@ -195,6 +197,7 @@ enum bcm63xx_regs_set {
- #define BCM_6338_PCMDMA_BASE (0xdeadbeef)
- #define BCM_6338_PCMDMAC_BASE (0xdeadbeef)
- #define BCM_6338_PCMDMAS_BASE (0xdeadbeef)
-+#define BCM_6338_RNG_BASE (0xdeadbeef)
-
- /*
- * 6345 register sets base address
-@@ -238,6 +241,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_PCMDMA_BASE (0xdeadbeef)
- #define BCM_6345_PCMDMAC_BASE (0xdeadbeef)
- #define BCM_6345_PCMDMAS_BASE (0xdeadbeef)
-+#define BCM_6345_RNG_BASE (0xdeadbeef)
-
- /*
- * 6348 register sets base address
-@@ -278,6 +282,7 @@ enum bcm63xx_regs_set {
- #define BCM_6348_PCMDMA_BASE (0xdeadbeef)
- #define BCM_6348_PCMDMAC_BASE (0xdeadbeef)
- #define BCM_6348_PCMDMAS_BASE (0xdeadbeef)
-+#define BCM_6348_RNG_BASE (0xdeadbeef)
-
- /*
- * 6358 register sets base address
-@@ -318,6 +323,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_PCMDMA_BASE (0xfffe1800)
- #define BCM_6358_PCMDMAC_BASE (0xfffe1900)
- #define BCM_6358_PCMDMAS_BASE (0xfffe1a00)
-+#define BCM_6358_RNG_BASE (0xdeadbeef)
-
-
- /*
-@@ -359,6 +365,7 @@ enum bcm63xx_regs_set {
- #define BCM_6368_PCMDMA_BASE (0xb0005800)
- #define BCM_6368_PCMDMAC_BASE (0xb0005a00)
- #define BCM_6368_PCMDMAS_BASE (0xb0005c00)
-+#define BCM_6368_RNG_BASE (0xb0004180)
-
-
- extern const unsigned long *bcm63xx_regs_base;
-@@ -404,6 +411,7 @@ extern const unsigned long *bcm63xx_regs
- __GEN_RSET_BASE(__cpu, PCMDMA) \
- __GEN_RSET_BASE(__cpu, PCMDMAC) \
- __GEN_RSET_BASE(__cpu, PCMDMAS) \
-+ __GEN_RSET_BASE(__cpu, RNG) \
- }
-
- #define __GEN_CPU_REGS_TABLE(__cpu) \
-@@ -442,6 +450,7 @@ extern const unsigned long *bcm63xx_regs
- [RSET_PCMDMA] = BCM_## __cpu ##_PCMDMA_BASE, \
- [RSET_PCMDMAC] = BCM_## __cpu ##_PCMDMAC_BASE, \
- [RSET_PCMDMAS] = BCM_## __cpu ##_PCMDMAS_BASE, \
-+ [RSET_RNG] = BCM_## __cpu ##_RNG_BASE, \
-
-
- static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -974,6 +974,20 @@
- #define M2M_DSTID_REG(x) ((x) * 0x40 + 0x18)
-
- /*************************************************************************
-+ * _REG relative to RSET_RNG
-+ *************************************************************************/
-+
-+#define RNG_CTRL 0x00
-+#define RNG_EN (1 << 0)
-+
-+#define RNG_STAT 0x04
-+#define RNG_AVAIL_MASK (0xff000000)
-+
-+#define RNG_DATA 0x08
-+#define RNG_THRES 0x0c
-+#define RNG_MASK 0x10
-+
-+/*************************************************************************
- * _REG relative to RSET_SPI
- *************************************************************************/
-
diff --git a/target/linux/brcm63xx/patches-3.3/020-MIPS-BCM63XX-add-RNG-driver-platform_device-stub.patch b/target/linux/brcm63xx/patches-3.3/020-MIPS-BCM63XX-add-RNG-driver-platform_device-stub.patch
deleted file mode 100644
index d759c57223..0000000000
--- a/target/linux/brcm63xx/patches-3.3/020-MIPS-BCM63XX-add-RNG-driver-platform_device-stub.patch
+++ /dev/null
@@ -1,71 +0,0 @@
-From 79fed26f65c22e0d67c9523f7a374f0585bd2803 Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Tue, 31 Jan 2012 15:12:24 +0100
-Subject: [PATCH 5/6] MIPS: BCM63XX: add RNG driver platform_device stub
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: mpm@selenic.com
-Cc: herbert@gondor.apana.org.au
-Patchwork: https://patchwork.linux-mips.org/patch/3325/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm63xx/Makefile | 4 ++--
- arch/mips/bcm63xx/dev-rng.c | 40 ++++++++++++++++++++++++++++++++++++++++
- 2 files changed, 42 insertions(+), 2 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-rng.c
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-- dev-dsp.o dev-enet.o dev-pcmcia.o dev-spi.o dev-uart.o \
-- dev-wdt.o
-+ dev-dsp.o dev-enet.o dev-pcmcia.o dev-rng.o dev-spi.o \
-+ dev-uart.o dev-wdt.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
- obj-y += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-rng.c
-@@ -0,0 +1,40 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+
-+static struct resource rng_resources[] = {
-+ {
-+ .start = -1, /* filled at runtime */
-+ .end = -1, /* filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ },
-+};
-+
-+static struct platform_device bcm63xx_rng_device = {
-+ .name = "bcm63xx-rng",
-+ .id = -1,
-+ .num_resources = ARRAY_SIZE(rng_resources),
-+ .resource = rng_resources,
-+};
-+
-+int __init bcm63xx_rng_register(void)
-+{
-+ if (!BCMCPU_IS_6368())
-+ return -ENODEV;
-+
-+ rng_resources[0].start = bcm63xx_regset_address(RSET_RNG);
-+ rng_resources[0].end = rng_resources[0].start;
-+ rng_resources[0].end += RSET_RNG_SIZE - 1;
-+
-+ return platform_device_register(&bcm63xx_rng_device);
-+}
-+arch_initcall(bcm63xx_rng_register);
diff --git a/target/linux/brcm63xx/patches-3.3/021-hw_random-add-Broadcom-BCM63xx-RNG-driver.patch b/target/linux/brcm63xx/patches-3.3/021-hw_random-add-Broadcom-BCM63xx-RNG-driver.patch
deleted file mode 100644
index 7e66fd52a0..0000000000
--- a/target/linux/brcm63xx/patches-3.3/021-hw_random-add-Broadcom-BCM63xx-RNG-driver.patch
+++ /dev/null
@@ -1,229 +0,0 @@
-From 1cfc5c76c5f48359716bd804daef2f2f7554fb4a Mon Sep 17 00:00:00 2001
-From: Florian Fainelli <florian@openwrt.org>
-Date: Tue, 31 Jan 2012 15:12:25 +0100
-Subject: [PATCH 6/6] hw_random: add Broadcom BCM63xx RNG driver
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
-Cc: linux-mips@linux-mips.org
-Cc: mpm@selenic.com
-Cc: herbert@gondor.apana.org.au
-Patchwork: https://patchwork.linux-mips.org/patch/3327/
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- drivers/char/hw_random/Kconfig | 14 +++
- drivers/char/hw_random/Makefile | 1 +
- drivers/char/hw_random/bcm63xx-rng.c | 175 ++++++++++++++++++++++++++++++++++
- 3 files changed, 190 insertions(+), 0 deletions(-)
- create mode 100644 drivers/char/hw_random/bcm63xx-rng.c
-
---- a/drivers/char/hw_random/Kconfig
-+++ b/drivers/char/hw_random/Kconfig
-@@ -73,6 +73,20 @@ config HW_RANDOM_ATMEL
-
- If unsure, say Y.
-
-+config HW_RANDOM_BCM63XX
-+ tristate "Broadcom BCM63xx Random Number Generator support"
-+ depends on HW_RANDOM && BCM63XX
-+ default HW_RANDOM
-+ ---help---
-+ This driver provides kernel-side support for the Random Number
-+ Generator hardware found on the Broadcom BCM63xx SoCs.
-+
-+ To compile this driver as a module, choose M here: the
-+ module will be called bcm63xx-rng
-+
-+ If unusure, say Y.
-+
-+
- config HW_RANDOM_GEODE
- tristate "AMD Geode HW Random Number Generator support"
- depends on HW_RANDOM && X86_32 && PCI
---- a/drivers/char/hw_random/Makefile
-+++ b/drivers/char/hw_random/Makefile
-@@ -8,6 +8,7 @@ obj-$(CONFIG_HW_RANDOM_TIMERIOMEM) += ti
- obj-$(CONFIG_HW_RANDOM_INTEL) += intel-rng.o
- obj-$(CONFIG_HW_RANDOM_AMD) += amd-rng.o
- obj-$(CONFIG_HW_RANDOM_ATMEL) += atmel-rng.o
-+obj-$(CONFIG_HW_RANDOM_BCM63XX) += bcm63xx-rng.o
- obj-$(CONFIG_HW_RANDOM_GEODE) += geode-rng.o
- obj-$(CONFIG_HW_RANDOM_N2RNG) += n2-rng.o
- n2-rng-y := n2-drv.o n2-asm.o
---- /dev/null
-+++ b/drivers/char/hw_random/bcm63xx-rng.c
-@@ -0,0 +1,175 @@
-+/*
-+ * Broadcom BCM63xx Random Number Generator support
-+ *
-+ * Copyright (C) 2011, Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2009, Broadcom Corporation
-+ *
-+ */
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+#include <linux/err.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <linux/hw_random.h>
-+
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_regs.h>
-+
-+struct bcm63xx_rng_priv {
-+ struct clk *clk;
-+ void __iomem *regs;
-+};
-+
-+#define to_rng_priv(rng) ((struct bcm63xx_rng_priv *)rng->priv)
-+
-+static int bcm63xx_rng_init(struct hwrng *rng)
-+{
-+ struct bcm63xx_rng_priv *priv = to_rng_priv(rng);
-+ u32 val;
-+
-+ val = bcm_readl(priv->regs + RNG_CTRL);
-+ val |= RNG_EN;
-+ bcm_writel(val, priv->regs + RNG_CTRL);
-+
-+ return 0;
-+}
-+
-+static void bcm63xx_rng_cleanup(struct hwrng *rng)
-+{
-+ struct bcm63xx_rng_priv *priv = to_rng_priv(rng);
-+ u32 val;
-+
-+ val = bcm_readl(priv->regs + RNG_CTRL);
-+ val &= ~RNG_EN;
-+ bcm_writel(val, priv->regs + RNG_CTRL);
-+}
-+
-+static int bcm63xx_rng_data_present(struct hwrng *rng, int wait)
-+{
-+ struct bcm63xx_rng_priv *priv = to_rng_priv(rng);
-+
-+ return bcm_readl(priv->regs + RNG_STAT) & RNG_AVAIL_MASK;
-+}
-+
-+static int bcm63xx_rng_data_read(struct hwrng *rng, u32 *data)
-+{
-+ struct bcm63xx_rng_priv *priv = to_rng_priv(rng);
-+
-+ *data = bcm_readl(priv->regs + RNG_DATA);
-+
-+ return 4;
-+}
-+
-+static int __init bcm63xx_rng_probe(struct platform_device *pdev)
-+{
-+ struct resource *r;
-+ struct clk *clk;
-+ int ret;
-+ struct bcm63xx_rng_priv *priv;
-+ struct hwrng *rng;
-+
-+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ if (!r) {
-+ dev_err(&pdev->dev, "no iomem resource\n");
-+ ret = -ENXIO;
-+ goto out;
-+ }
-+
-+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-+ if (!priv) {
-+ dev_err(&pdev->dev, "no memory for private structure\n");
-+ ret = -ENOMEM;
-+ goto out;
-+ }
-+
-+ rng = kzalloc(sizeof(*rng), GFP_KERNEL);
-+ if (!rng) {
-+ dev_err(&pdev->dev, "no memory for rng structure\n");
-+ ret = -ENOMEM;
-+ goto out_free_priv;
-+ }
-+
-+ platform_set_drvdata(pdev, rng);
-+ rng->priv = (unsigned long)priv;
-+ rng->name = pdev->name;
-+ rng->init = bcm63xx_rng_init;
-+ rng->cleanup = bcm63xx_rng_cleanup;
-+ rng->data_present = bcm63xx_rng_data_present;
-+ rng->data_read = bcm63xx_rng_data_read;
-+
-+ clk = clk_get(&pdev->dev, "ipsec");
-+ if (IS_ERR(clk)) {
-+ dev_err(&pdev->dev, "no clock for device\n");
-+ ret = PTR_ERR(clk);
-+ goto out_free_rng;
-+ }
-+
-+ priv->clk = clk;
-+
-+ if (!devm_request_mem_region(&pdev->dev, r->start,
-+ resource_size(r), pdev->name)) {
-+ dev_err(&pdev->dev, "request mem failed");
-+ ret = -ENOMEM;
-+ goto out_free_rng;
-+ }
-+
-+ priv->regs = devm_ioremap_nocache(&pdev->dev, r->start,
-+ resource_size(r));
-+ if (!priv->regs) {
-+ dev_err(&pdev->dev, "ioremap failed");
-+ ret = -ENOMEM;
-+ goto out_free_rng;
-+ }
-+
-+ clk_enable(clk);
-+
-+ ret = hwrng_register(rng);
-+ if (ret) {
-+ dev_err(&pdev->dev, "failed to register rng device\n");
-+ goto out_clk_disable;
-+ }
-+
-+ dev_info(&pdev->dev, "registered RNG driver\n");
-+
-+ return 0;
-+
-+out_clk_disable:
-+ clk_disable(clk);
-+out_free_rng:
-+ platform_set_drvdata(pdev, NULL);
-+ kfree(rng);
-+out_free_priv:
-+ kfree(priv);
-+out:
-+ return ret;
-+}
-+
-+static int __devexit bcm63xx_rng_remove(struct platform_device *pdev)
-+{
-+ struct hwrng *rng = platform_get_drvdata(pdev);
-+ struct bcm63xx_rng_priv *priv = to_rng_priv(rng);
-+
-+ hwrng_unregister(rng);
-+ clk_disable(priv->clk);
-+ kfree(priv);
-+ kfree(rng);
-+ platform_set_drvdata(pdev, NULL);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver bcm63xx_rng_driver = {
-+ .probe = bcm63xx_rng_probe,
-+ .remove = __devexit_p(bcm63xx_rng_remove),
-+ .driver = {
-+ .name = "bcm63xx-rng",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+module_platform_driver(bcm63xx_rng_driver);
-+
-+MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-+MODULE_DESCRIPTION("Broadcom BCM63xx RNG driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/brcm63xx/patches-3.3/022-MIPS-BCM63XX-Move-flash-registration-out-of-board_bc.patch b/target/linux/brcm63xx/patches-3.3/022-MIPS-BCM63XX-Move-flash-registration-out-of-board_bc.patch
deleted file mode 100644
index e9c85a2a66..0000000000
--- a/target/linux/brcm63xx/patches-3.3/022-MIPS-BCM63XX-Move-flash-registration-out-of-board_bc.patch
+++ /dev/null
@@ -1,202 +0,0 @@
-From bfe47f0f68b5f7a3a92d07266cba58b188fe10e7 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 12 Jun 2012 10:23:38 +0200
-Subject: [PATCH 1/8] MIPS: BCM63XX: Move flash registration out of board_bcm963xx.c
-
-board_bcm963xx.c is already large enough.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: Maxime Bizon <mbizon@freebox.fr>
-Cc: Florian Fainelli <florian@openwrt.org>
-Cc: Kevin Cernekee <cernekee@gmail.com>
-Patchwork: https://patchwork.linux-mips.org/patch/3952/
-Reviewed-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm63xx/Makefile | 4 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 49 +-------------
- arch/mips/bcm63xx/dev-flash.c | 69 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 6 ++
- 4 files changed, 79 insertions(+), 49 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-flash.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-- dev-dsp.o dev-enet.o dev-pcmcia.o dev-rng.o dev-spi.o \
-- dev-uart.o dev-wdt.o
-+ dev-dsp.o dev-enet.o dev-flash.o dev-pcmcia.o dev-rng.o \
-+ dev-spi.o dev-uart.o dev-wdt.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
- obj-y += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -11,9 +11,6 @@
- #include <linux/kernel.h>
- #include <linux/string.h>
- #include <linux/platform_device.h>
--#include <linux/mtd/mtd.h>
--#include <linux/mtd/partitions.h>
--#include <linux/mtd/physmap.h>
- #include <linux/ssb/ssb.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
-@@ -24,6 +21,7 @@
- #include <bcm63xx_dev_pci.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
-+#include <bcm63xx_dev_flash.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
- #include <board_bcm963xx.h>
-@@ -809,40 +807,6 @@ void __init board_setup(void)
- panic("unexpected CPU for bcm963xx board");
- }
-
--static struct mtd_partition mtd_partitions[] = {
-- {
-- .name = "cfe",
-- .offset = 0x0,
-- .size = 0x40000,
-- }
--};
--
--static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
--
--static struct physmap_flash_data flash_data = {
-- .width = 2,
-- .nr_parts = ARRAY_SIZE(mtd_partitions),
-- .parts = mtd_partitions,
-- .part_probe_types = bcm63xx_part_types,
--};
--
--static struct resource mtd_resources[] = {
-- {
-- .start = 0, /* filled at runtime */
-- .end = 0, /* filled at runtime */
-- .flags = IORESOURCE_MEM,
-- }
--};
--
--static struct platform_device mtd_dev = {
-- .name = "physmap-flash",
-- .resource = mtd_resources,
-- .num_resources = ARRAY_SIZE(mtd_resources),
-- .dev = {
-- .platform_data = &flash_data,
-- },
--};
--
- static struct gpio_led_platform_data bcm63xx_led_data;
-
- static struct platform_device bcm63xx_gpio_leds = {
-@@ -856,8 +820,6 @@ static struct platform_device bcm63xx_gp
- */
- int __init board_register_devices(void)
- {
-- u32 val;
--
- if (board.has_uart0)
- bcm63xx_uart_register(0);
-
-@@ -893,14 +855,7 @@ int __init board_register_devices(void)
-
- bcm63xx_spi_register();
-
-- /* read base address of boot chip select (0) */
-- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-- val &= MPI_CSBASE_BASE_MASK;
--
-- mtd_resources[0].start = val;
-- mtd_resources[0].end = 0x1FFFFFFF;
--
-- platform_device_register(&mtd_dev);
-+ bcm63xx_flash_register();
-
- bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
- bcm63xx_led_data.leds = board.leds;
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -0,0 +1,69 @@
-+/*
-+ * Broadcom BCM63xx flash registration
-+ *
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+
-+static struct mtd_partition mtd_partitions[] = {
-+ {
-+ .name = "cfe",
-+ .offset = 0x0,
-+ .size = 0x40000,
-+ }
-+};
-+
-+static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
-+
-+static struct physmap_flash_data flash_data = {
-+ .width = 2,
-+ .parts = mtd_partitions,
-+ .part_probe_types = bcm63xx_part_types,
-+};
-+
-+static struct resource mtd_resources[] = {
-+ {
-+ .start = 0, /* filled at runtime */
-+ .end = 0, /* filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device mtd_dev = {
-+ .name = "physmap-flash",
-+ .resource = mtd_resources,
-+ .num_resources = ARRAY_SIZE(mtd_resources),
-+ .dev = {
-+ .platform_data = &flash_data,
-+ },
-+};
-+
-+int __init bcm63xx_flash_register(void)
-+{
-+ u32 val;
-+
-+ /* read base address of boot chip select (0) */
-+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+ val &= MPI_CSBASE_BASE_MASK;
-+
-+ mtd_resources[0].start = val;
-+ mtd_resources[0].end = 0x1FFFFFFF;
-+
-+ return platform_device_register(&mtd_dev);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -0,0 +1,6 @@
-+#ifndef __BCM63XX_FLASH_H
-+#define __BCM63XX_FLASH_H
-+
-+int __init bcm63xx_flash_register(void);
-+
-+#endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.3/023-MIPS-BCM63XX-Add-flash-type-detection.patch b/target/linux/brcm63xx/patches-3.3/023-MIPS-BCM63XX-Add-flash-type-detection.patch
deleted file mode 100644
index b0f13abbaf..0000000000
--- a/target/linux/brcm63xx/patches-3.3/023-MIPS-BCM63XX-Add-flash-type-detection.patch
+++ /dev/null
@@ -1,137 +0,0 @@
-From 0c921d542eb4359791cffd1737bf45184f6ae352 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 12 Jun 2012 10:23:39 +0200
-Subject: [PATCH 2/8] MIPS: BCM63XX: Add flash type detection
-
-On BCM6358 and BCM6368 the attached flash type is exposed through a
-bootstrapping register. Use it for auto detecting the flash type on
-those and default to parallel flash for earlier SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: Maxime Bizon <mbizon@freebox.fr>
-Cc: Florian Fainelli <florian@openwrt.org>
-Cc: Kevin Cernekee <cernekee@gmail.com>
-Patchwork: https://patchwork.linux-mips.org/patch/3954/
-Reviewed-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm63xx/dev-flash.c | 60 ++++++++++++++++++--
- .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 6 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 9 +++
- 3 files changed, 69 insertions(+), 6 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -7,6 +7,7 @@
- *
- * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
- * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
- */
-
- #include <linux/init.h>
-@@ -54,16 +55,63 @@ static struct platform_device mtd_dev =
- },
- };
-
--int __init bcm63xx_flash_register(void)
-+static int __init bcm63xx_detect_flash_type(void)
- {
- u32 val;
-
-- /* read base address of boot chip select (0) */
-- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-- val &= MPI_CSBASE_BASE_MASK;
-+ switch (bcm63xx_get_cpu_id()) {
-+ case BCM6338_CPU_ID:
-+ case BCM6345_CPU_ID:
-+ case BCM6348_CPU_ID:
-+ /* no way to auto detect so assume parallel */
-+ return BCM63XX_FLASH_TYPE_PARALLEL;
-+ case BCM6358_CPU_ID:
-+ val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-+ if (val & STRAPBUS_6358_BOOT_SEL_PARALLEL)
-+ return BCM63XX_FLASH_TYPE_PARALLEL;
-+ else
-+ return BCM63XX_FLASH_TYPE_SERIAL;
-+ case BCM6368_CPU_ID:
-+ val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-+ switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
-+ case STRAPBUS_6368_BOOT_SEL_NAND:
-+ return BCM63XX_FLASH_TYPE_NAND;
-+ case STRAPBUS_6368_BOOT_SEL_SERIAL:
-+ return BCM63XX_FLASH_TYPE_SERIAL;
-+ case STRAPBUS_6368_BOOT_SEL_PARALLEL:
-+ return BCM63XX_FLASH_TYPE_PARALLEL;
-+ }
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+int __init bcm63xx_flash_register(void)
-+{
-+ int flash_type;
-+ u32 val;
-
-- mtd_resources[0].start = val;
-- mtd_resources[0].end = 0x1FFFFFFF;
-+ flash_type = bcm63xx_detect_flash_type();
-
-- return platform_device_register(&mtd_dev);
-+ switch (flash_type) {
-+ case BCM63XX_FLASH_TYPE_PARALLEL:
-+ /* read base address of boot chip select (0) */
-+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+ val &= MPI_CSBASE_BASE_MASK;
-+
-+ mtd_resources[0].start = val;
-+ mtd_resources[0].end = 0x1FFFFFFF;
-+
-+ return platform_device_register(&mtd_dev);
-+ case BCM63XX_FLASH_TYPE_SERIAL:
-+ pr_warn("unsupported serial flash detected\n");
-+ return -ENODEV;
-+ case BCM63XX_FLASH_TYPE_NAND:
-+ pr_warn("unsupported NAND flash detected\n");
-+ return -ENODEV;
-+ default:
-+ pr_err("flash detection failed for BCM%x: %d\n",
-+ bcm63xx_get_cpu_id(), flash_type);
-+ return -ENODEV;
-+ }
- }
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -1,6 +1,12 @@
- #ifndef __BCM63XX_FLASH_H
- #define __BCM63XX_FLASH_H
-
-+enum {
-+ BCM63XX_FLASH_TYPE_PARALLEL,
-+ BCM63XX_FLASH_TYPE_SERIAL,
-+ BCM63XX_FLASH_TYPE_NAND,
-+};
-+
- int __init bcm63xx_flash_register(void);
-
- #endif /* __BCM63XX_FLASH_H */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -507,6 +507,15 @@
- #define GPIO_BASEMODE_6368_MASK 0x7
- /* those bits must be kept as read in gpio basemode register*/
-
-+#define GPIO_STRAPBUS_REG 0x40
-+#define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
-+#define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
-+#define STRAPBUS_6368_BOOT_SEL_MASK 0x3
-+#define STRAPBUS_6368_BOOT_SEL_NAND 0
-+#define STRAPBUS_6368_BOOT_SEL_SERIAL 1
-+#define STRAPBUS_6368_BOOT_SEL_PARALLEL 3
-+
-+
- /*************************************************************************
- * _REG relative to RSET_ENET
- *************************************************************************/
diff --git a/target/linux/brcm63xx/patches-3.3/024-MIPS-BCM63XX-Use-the-Chip-ID-register-for-identifyin.patch b/target/linux/brcm63xx/patches-3.3/024-MIPS-BCM63XX-Use-the-Chip-ID-register-for-identifyin.patch
deleted file mode 100644
index e45a0d1634..0000000000
--- a/target/linux/brcm63xx/patches-3.3/024-MIPS-BCM63XX-Use-the-Chip-ID-register-for-identifyin.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From a9168d99658bd050e49afc06880d140e2fc2c231 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 12 Jun 2012 10:23:40 +0200
-Subject: [PATCH 3/8] MIPS: BCM63XX: Use the Chip ID register for identifying the SoC
-
-Newer BCM63XX SoCs use virtually the same CPU ID, differing only in the
-revision bits. But since they all have the Chip ID register at the same
-location, we can use that to identify the SoC we are running on.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: Maxime Bizon <mbizon@freebox.fr>
-Cc: Florian Fainelli <florian@openwrt.org>
-Cc: Kevin Cernekee <cernekee@gmail.com>
-Patchwork: https://patchwork.linux-mips.org/patch/3955/
-Reviewed-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm63xx/cpu.c | 20 ++++++++++++--------
- 1 files changed, 12 insertions(+), 8 deletions(-)
-
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -228,17 +228,21 @@ void __init bcm63xx_cpu_init(void)
- bcm63xx_irqs = bcm6345_irqs;
- break;
- case CPU_BMIPS4350:
-- switch (read_c0_prid() & 0xf0) {
-- case 0x10:
-+ if ((read_c0_prid() & 0xf0) == 0x10) {
- expected_cpu_id = BCM6358_CPU_ID;
- bcm63xx_regs_base = bcm6358_regs_base;
- bcm63xx_irqs = bcm6358_irqs;
-- break;
-- case 0x30:
-- expected_cpu_id = BCM6368_CPU_ID;
-- bcm63xx_regs_base = bcm6368_regs_base;
-- bcm63xx_irqs = bcm6368_irqs;
-- break;
-+ } else {
-+ /* all newer chips have the same chip id location */
-+ u16 chip_id = bcm_readw(BCM_6368_PERF_BASE);
-+
-+ switch (chip_id) {
-+ case BCM6368_CPU_ID:
-+ expected_cpu_id = BCM6368_CPU_ID;
-+ bcm63xx_regs_base = bcm6368_regs_base;
-+ bcm63xx_irqs = bcm6368_irqs;
-+ break;
-+ }
- }
- break;
- }
diff --git a/target/linux/brcm63xx/patches-3.3/025-MIPS-BCM63XX-Add-basic-BCM6328-support.patch b/target/linux/brcm63xx/patches-3.3/025-MIPS-BCM63XX-Add-basic-BCM6328-support.patch
deleted file mode 100644
index a64eca85b8..0000000000
--- a/target/linux/brcm63xx/patches-3.3/025-MIPS-BCM63XX-Add-basic-BCM6328-support.patch
+++ /dev/null
@@ -1,590 +0,0 @@
-From 8f9ed2e5502ed3ba3d4c89678cb44f43ccd5b9e0 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 13 Jun 2012 16:46:54 +0100
-Subject: [PATCH 4/8] MIPS: BCM63XX: Add basic BCM6328 support
-
-This includes CPU speed, memory size detection and working UART, but
-lacking the appropriate drivers, no support for attached flash.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: Maxime Bizon <mbizon@freebox.fr>
-Cc: Florian Fainelli <florian@openwrt.org>
-Cc: Kevin Cernekee <cernekee@gmail.com>
-Patchwork: https://patchwork.linux-mips.org/patch/3951/
-Reviewed-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm63xx/Kconfig | 3 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 12 ++-
- arch/mips/bcm63xx/cpu.c | 43 ++++++++
- arch/mips/bcm63xx/dev-flash.c | 6 +
- arch/mips/bcm63xx/dev-spi.c | 2 +-
- arch/mips/bcm63xx/irq.c | 21 ++++
- arch/mips/bcm63xx/prom.c | 4 +-
- arch/mips/bcm63xx/setup.c | 13 ++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 111 ++++++++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 2 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 2 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 54 ++++++++++
- arch/mips/include/asm/mach-bcm63xx/ioremap.h | 1 +
- 13 files changed, 265 insertions(+), 9 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -1,6 +1,9 @@
- menu "CPU support"
- depends on BCM63XX
-
-+config BCM63XX_CPU_6328
-+ bool "support 6328 CPU"
-+
- config BCM63XX_CPU_6338
- bool "support 6338 CPU"
- select HW_HAS_PCI
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -708,9 +708,15 @@ void __init board_prom_init(void)
- char cfe_version[32];
- u32 val;
-
-- /* read base address of boot chip select (0) */
-- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-- val &= MPI_CSBASE_BASE_MASK;
-+ /* read base address of boot chip select (0)
-+ * 6328 does not have MPI but boots from a fixed address
-+ */
-+ if (BCMCPU_IS_6328())
-+ val = 0x18000000;
-+ else {
-+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+ val &= MPI_CSBASE_BASE_MASK;
-+ }
- boot_addr = (u8 *)KSEG1ADDR(val);
-
- /* dump cfe version */
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -29,6 +29,14 @@ static u16 bcm63xx_cpu_rev;
- static unsigned int bcm63xx_cpu_freq;
- static unsigned int bcm63xx_memory_size;
-
-+static const unsigned long bcm6328_regs_base[] = {
-+ __GEN_CPU_REGS_TABLE(6328)
-+};
-+
-+static const int bcm6328_irqs[] = {
-+ __GEN_CPU_IRQ_TABLE(6328)
-+};
-+
- static const unsigned long bcm6338_regs_base[] = {
- __GEN_CPU_REGS_TABLE(6338)
- };
-@@ -99,6 +107,33 @@ unsigned int bcm63xx_get_memory_size(voi
- static unsigned int detect_cpu_clock(void)
- {
- switch (bcm63xx_get_cpu_id()) {
-+ case BCM6328_CPU_ID:
-+ {
-+ unsigned int tmp, mips_pll_fcvo;
-+
-+ tmp = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-+ mips_pll_fcvo = (tmp & STRAPBUS_6328_FCVO_MASK)
-+ >> STRAPBUS_6328_FCVO_SHIFT;
-+
-+ switch (mips_pll_fcvo) {
-+ case 0x12:
-+ case 0x14:
-+ case 0x19:
-+ return 160000000;
-+ case 0x1c:
-+ return 192000000;
-+ case 0x13:
-+ case 0x15:
-+ return 200000000;
-+ case 0x1a:
-+ return 384000000;
-+ case 0x16:
-+ return 400000000;
-+ default:
-+ return 320000000;
-+ }
-+
-+ }
- case BCM6338_CPU_ID:
- /* BCM6338 has a fixed 240 Mhz frequency */
- return 240000000;
-@@ -170,6 +205,9 @@ static unsigned int detect_memory_size(v
- unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
- u32 val;
-
-+ if (BCMCPU_IS_6328())
-+ return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-+
- if (BCMCPU_IS_6345()) {
- val = bcm_sdram_readl(SDRAM_MBASE_REG);
- return (val * 8 * 1024 * 1024);
-@@ -237,6 +275,11 @@ void __init bcm63xx_cpu_init(void)
- u16 chip_id = bcm_readw(BCM_6368_PERF_BASE);
-
- switch (chip_id) {
-+ case BCM6328_CPU_ID:
-+ expected_cpu_id = BCM6328_CPU_ID;
-+ bcm63xx_regs_base = bcm6328_regs_base;
-+ bcm63xx_irqs = bcm6328_irqs;
-+ break;
- case BCM6368_CPU_ID:
- expected_cpu_id = BCM6368_CPU_ID;
- bcm63xx_regs_base = bcm6368_regs_base;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -60,6 +60,12 @@ static int __init bcm63xx_detect_flash_t
- u32 val;
-
- switch (bcm63xx_get_cpu_id()) {
-+ case BCM6328_CPU_ID:
-+ val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-+ if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
-+ return BCM63XX_FLASH_TYPE_SERIAL;
-+ else
-+ return BCM63XX_FLASH_TYPE_NAND;
- case BCM6338_CPU_ID:
- case BCM6345_CPU_ID:
- case BCM6348_CPU_ID:
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -87,7 +87,7 @@ int __init bcm63xx_spi_register(void)
- {
- struct clk *periph_clk;
-
-- if (BCMCPU_IS_6345())
-+ if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
- return -ENODEV;
-
- periph_clk = clk_get(NULL, "periph");
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -27,6 +27,17 @@ static void __internal_irq_unmask_32(uns
- static void __internal_irq_unmask_64(unsigned int irq) __maybe_unused;
-
- #ifndef BCMCPU_RUNTIME_DETECT
-+#ifdef CONFIG_BCM63XX_CPU_6328
-+#define irq_stat_reg PERF_IRQSTAT_6328_REG
-+#define irq_mask_reg PERF_IRQMASK_6328_REG
-+#define irq_bits 64
-+#define is_ext_irq_cascaded 1
-+#define ext_irq_start (BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-+#define ext_irq_end (BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE)
-+#define ext_irq_count 4
-+#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6328
-+#define ext_irq_cfg_reg2 0
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6338
- #define irq_stat_reg PERF_IRQSTAT_6338_REG
- #define irq_mask_reg PERF_IRQMASK_6338_REG
-@@ -118,6 +129,16 @@ static void bcm63xx_init_irq(void)
- irq_mask_addr = bcm63xx_regset_address(RSET_PERF);
-
- switch (bcm63xx_get_cpu_id()) {
-+ case BCM6328_CPU_ID:
-+ irq_stat_addr += PERF_IRQSTAT_6328_REG;
-+ irq_mask_addr += PERF_IRQMASK_6328_REG;
-+ irq_bits = 64;
-+ ext_irq_count = 4;
-+ is_ext_irq_cascaded = 1;
-+ ext_irq_start = BCM_6328_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+ ext_irq_end = BCM_6328_EXT_IRQ3 - IRQ_INTERNAL_BASE;
-+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6328;
-+ break;
- case BCM6338_CPU_ID:
- irq_stat_addr += PERF_IRQSTAT_6338_REG;
- irq_mask_addr += PERF_IRQMASK_6338_REG;
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -26,7 +26,9 @@ void __init prom_init(void)
- bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG);
-
- /* disable all hardware blocks clock for now */
-- if (BCMCPU_IS_6338())
-+ if (BCMCPU_IS_6328())
-+ mask = CKCTL_6328_ALL_SAFE_EN;
-+ else if (BCMCPU_IS_6338())
- mask = CKCTL_6338_ALL_SAFE_EN;
- else if (BCMCPU_IS_6345())
- mask = CKCTL_6345_ALL_SAFE_EN;
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -68,6 +68,9 @@ void bcm63xx_machine_reboot(void)
-
- /* mask and clear all external irq */
- switch (bcm63xx_get_cpu_id()) {
-+ case BCM6328_CPU_ID:
-+ perf_regs[0] = PERF_EXTIRQ_CFG_REG_6328;
-+ break;
- case BCM6338_CPU_ID:
- perf_regs[0] = PERF_EXTIRQ_CFG_REG_6338;
- break;
-@@ -95,9 +98,13 @@ void bcm63xx_machine_reboot(void)
- bcm6348_a1_reboot();
-
- printk(KERN_INFO "triggering watchdog soft-reset...\n");
-- reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
-- reg |= SYS_PLL_SOFT_RESET;
-- bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
-+ if (BCMCPU_IS_6328()) {
-+ bcm_wdt_writel(1, WDT_SOFTRESET_REG);
-+ } else {
-+ reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG);
-+ reg |= SYS_PLL_SOFT_RESET;
-+ bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG);
-+ }
- while (1)
- ;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -9,6 +9,7 @@
- * compile time if only one CPU support is enabled (idea stolen from
- * arm mach-types)
- */
-+#define BCM6328_CPU_ID 0x6328
- #define BCM6338_CPU_ID 0x6338
- #define BCM6345_CPU_ID 0x6345
- #define BCM6348_CPU_ID 0x6348
-@@ -20,6 +21,19 @@ u16 __bcm63xx_get_cpu_id(void);
- u16 bcm63xx_get_cpu_rev(void);
- unsigned int bcm63xx_get_cpu_freq(void);
-
-+#ifdef CONFIG_BCM63XX_CPU_6328
-+# ifdef bcm63xx_get_cpu_id
-+# undef bcm63xx_get_cpu_id
-+# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
-+# define BCMCPU_RUNTIME_DETECT
-+# else
-+# define bcm63xx_get_cpu_id() BCM6328_CPU_ID
-+# endif
-+# define BCMCPU_IS_6328() (bcm63xx_get_cpu_id() == BCM6328_CPU_ID)
-+#else
-+# define BCMCPU_IS_6328() (0)
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6338
- # ifdef bcm63xx_get_cpu_id
- # undef bcm63xx_get_cpu_id
-@@ -129,7 +143,8 @@ enum bcm63xx_regs_set {
- RSET_PCMDMA,
- RSET_PCMDMAC,
- RSET_PCMDMAS,
-- RSET_RNG
-+ RSET_RNG,
-+ RSET_MISC
- };
-
- #define RSET_DSL_LMEM_SIZE (64 * 1024 * 4)
-@@ -156,6 +171,49 @@ enum bcm63xx_regs_set {
- #define RSET_RNG_SIZE 20
-
- /*
-+ * 6328 register sets base address
-+ */
-+#define BCM_6328_DSL_LMEM_BASE (0xdeadbeef)
-+#define BCM_6328_PERF_BASE (0xb0000000)
-+#define BCM_6328_TIMER_BASE (0xb0000040)
-+#define BCM_6328_WDT_BASE (0xb000005c)
-+#define BCM_6328_UART0_BASE (0xb0000100)
-+#define BCM_6328_UART1_BASE (0xb0000120)
-+#define BCM_6328_GPIO_BASE (0xb0000080)
-+#define BCM_6328_SPI_BASE (0xdeadbeef)
-+#define BCM_6328_UDC0_BASE (0xdeadbeef)
-+#define BCM_6328_USBDMA_BASE (0xdeadbeef)
-+#define BCM_6328_OHCI0_BASE (0xdeadbeef)
-+#define BCM_6328_OHCI_PRIV_BASE (0xdeadbeef)
-+#define BCM_6328_USBH_PRIV_BASE (0xdeadbeef)
-+#define BCM_6328_MPI_BASE (0xdeadbeef)
-+#define BCM_6328_PCMCIA_BASE (0xdeadbeef)
-+#define BCM_6328_SDRAM_REGS_BASE (0xdeadbeef)
-+#define BCM_6328_DSL_BASE (0xb0001900)
-+#define BCM_6328_UBUS_BASE (0xdeadbeef)
-+#define BCM_6328_ENET0_BASE (0xdeadbeef)
-+#define BCM_6328_ENET1_BASE (0xdeadbeef)
-+#define BCM_6328_ENETDMA_BASE (0xb000d800)
-+#define BCM_6328_ENETDMAC_BASE (0xb000da00)
-+#define BCM_6328_ENETDMAS_BASE (0xb000dc00)
-+#define BCM_6328_ENETSW_BASE (0xb0e00000)
-+#define BCM_6328_EHCI0_BASE (0x10002500)
-+#define BCM_6328_SDRAM_BASE (0xdeadbeef)
-+#define BCM_6328_MEMC_BASE (0xdeadbeef)
-+#define BCM_6328_DDR_BASE (0xb0003000)
-+#define BCM_6328_M2M_BASE (0xdeadbeef)
-+#define BCM_6328_ATM_BASE (0xdeadbeef)
-+#define BCM_6328_XTM_BASE (0xdeadbeef)
-+#define BCM_6328_XTMDMA_BASE (0xb000b800)
-+#define BCM_6328_XTMDMAC_BASE (0xdeadbeef)
-+#define BCM_6328_XTMDMAS_BASE (0xdeadbeef)
-+#define BCM_6328_PCM_BASE (0xb000a800)
-+#define BCM_6328_PCMDMA_BASE (0xdeadbeef)
-+#define BCM_6328_PCMDMAC_BASE (0xdeadbeef)
-+#define BCM_6328_PCMDMAS_BASE (0xdeadbeef)
-+#define BCM_6328_RNG_BASE (0xdeadbeef)
-+#define BCM_6328_MISC_BASE (0xb0001800)
-+/*
- * 6338 register sets base address
- */
- #define BCM_6338_DSL_LMEM_BASE (0xfff00000)
-@@ -198,6 +256,7 @@ enum bcm63xx_regs_set {
- #define BCM_6338_PCMDMAC_BASE (0xdeadbeef)
- #define BCM_6338_PCMDMAS_BASE (0xdeadbeef)
- #define BCM_6338_RNG_BASE (0xdeadbeef)
-+#define BCM_6338_MISC_BASE (0xdeadbeef)
-
- /*
- * 6345 register sets base address
-@@ -242,6 +301,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_PCMDMAC_BASE (0xdeadbeef)
- #define BCM_6345_PCMDMAS_BASE (0xdeadbeef)
- #define BCM_6345_RNG_BASE (0xdeadbeef)
-+#define BCM_6345_MISC_BASE (0xdeadbeef)
-
- /*
- * 6348 register sets base address
-@@ -283,6 +343,7 @@ enum bcm63xx_regs_set {
- #define BCM_6348_PCMDMAC_BASE (0xdeadbeef)
- #define BCM_6348_PCMDMAS_BASE (0xdeadbeef)
- #define BCM_6348_RNG_BASE (0xdeadbeef)
-+#define BCM_6348_MISC_BASE (0xdeadbeef)
-
- /*
- * 6358 register sets base address
-@@ -324,6 +385,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_PCMDMAC_BASE (0xfffe1900)
- #define BCM_6358_PCMDMAS_BASE (0xfffe1a00)
- #define BCM_6358_RNG_BASE (0xdeadbeef)
-+#define BCM_6358_MISC_BASE (0xdeadbeef)
-
-
- /*
-@@ -366,6 +428,7 @@ enum bcm63xx_regs_set {
- #define BCM_6368_PCMDMAC_BASE (0xb0005a00)
- #define BCM_6368_PCMDMAS_BASE (0xb0005c00)
- #define BCM_6368_RNG_BASE (0xb0004180)
-+#define BCM_6368_MISC_BASE (0xdeadbeef)
-
-
- extern const unsigned long *bcm63xx_regs_base;
-@@ -412,6 +475,7 @@ extern const unsigned long *bcm63xx_regs
- __GEN_RSET_BASE(__cpu, PCMDMAC) \
- __GEN_RSET_BASE(__cpu, PCMDMAS) \
- __GEN_RSET_BASE(__cpu, RNG) \
-+ __GEN_RSET_BASE(__cpu, MISC) \
- }
-
- #define __GEN_CPU_REGS_TABLE(__cpu) \
-@@ -451,6 +515,7 @@ extern const unsigned long *bcm63xx_regs
- [RSET_PCMDMAC] = BCM_## __cpu ##_PCMDMAC_BASE, \
- [RSET_PCMDMAS] = BCM_## __cpu ##_PCMDMAS_BASE, \
- [RSET_RNG] = BCM_## __cpu ##_RNG_BASE, \
-+ [RSET_MISC] = BCM_## __cpu ##_MISC_BASE, \
-
-
- static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set)
-@@ -458,6 +523,9 @@ static inline unsigned long bcm63xx_regs
- #ifdef BCMCPU_RUNTIME_DETECT
- return bcm63xx_regs_base[set];
- #else
-+#ifdef CONFIG_BCM63XX_CPU_6328
-+ __GEN_RSET(6328)
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6338
- __GEN_RSET(6338)
- #endif
-@@ -512,6 +580,47 @@ enum bcm63xx_irq {
- };
-
- /*
-+ * 6328 irqs
-+ */
-+#define BCM_6328_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32)
-+
-+#define BCM_6328_TIMER_IRQ (IRQ_INTERNAL_BASE + 31)
-+#define BCM_6328_SPI_IRQ 0
-+#define BCM_6328_UART0_IRQ (IRQ_INTERNAL_BASE + 28)
-+#define BCM_6328_UART1_IRQ (BCM_6328_HIGH_IRQ_BASE + 7)
-+#define BCM_6328_DSL_IRQ (IRQ_INTERNAL_BASE + 4)
-+#define BCM_6328_UDC0_IRQ 0
-+#define BCM_6328_ENET0_IRQ 0
-+#define BCM_6328_ENET1_IRQ 0
-+#define BCM_6328_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6328_OHCI0_IRQ (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6328_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10)
-+#define BCM_6328_PCMCIA_IRQ 0
-+#define BCM_6328_ENET0_RXDMA_IRQ 0
-+#define BCM_6328_ENET0_TXDMA_IRQ 0
-+#define BCM_6328_ENET1_RXDMA_IRQ 0
-+#define BCM_6328_ENET1_TXDMA_IRQ 0
-+#define BCM_6328_PCI_IRQ (IRQ_INTERNAL_BASE + 23)
-+#define BCM_6328_ATM_IRQ 0
-+#define BCM_6328_ENETSW_RXDMA0_IRQ (BCM_6328_HIGH_IRQ_BASE + 0)
-+#define BCM_6328_ENETSW_RXDMA1_IRQ (BCM_6328_HIGH_IRQ_BASE + 1)
-+#define BCM_6328_ENETSW_RXDMA2_IRQ (BCM_6328_HIGH_IRQ_BASE + 2)
-+#define BCM_6328_ENETSW_RXDMA3_IRQ (BCM_6328_HIGH_IRQ_BASE + 3)
-+#define BCM_6328_ENETSW_TXDMA0_IRQ (BCM_6328_HIGH_IRQ_BASE + 4)
-+#define BCM_6328_ENETSW_TXDMA1_IRQ (BCM_6328_HIGH_IRQ_BASE + 5)
-+#define BCM_6328_ENETSW_TXDMA2_IRQ (BCM_6328_HIGH_IRQ_BASE + 6)
-+#define BCM_6328_ENETSW_TXDMA3_IRQ (BCM_6328_HIGH_IRQ_BASE + 7)
-+#define BCM_6328_XTM_IRQ (BCM_6328_HIGH_IRQ_BASE + 31)
-+#define BCM_6328_XTM_DMA0_IRQ (BCM_6328_HIGH_IRQ_BASE + 11)
-+
-+#define BCM_6328_PCM_DMA0_IRQ (IRQ_INTERNAL_BASE + 2)
-+#define BCM_6328_PCM_DMA1_IRQ (IRQ_INTERNAL_BASE + 3)
-+#define BCM_6328_EXT_IRQ0 (IRQ_INTERNAL_BASE + 24)
-+#define BCM_6328_EXT_IRQ1 (IRQ_INTERNAL_BASE + 25)
-+#define BCM_6328_EXT_IRQ2 (IRQ_INTERNAL_BASE + 26)
-+#define BCM_6328_EXT_IRQ3 (IRQ_INTERNAL_BASE + 27)
-+
-+/*
- * 6338 irqs
- */
- #define BCM_6338_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -8,6 +8,8 @@ int __init bcm63xx_gpio_init(void);
- static inline unsigned long bcm63xx_gpio_count(void)
- {
- switch (bcm63xx_get_cpu_id()) {
-+ case BCM6328_CPU_ID:
-+ return 32;
- case BCM6358_CPU_ID:
- return 40;
- case BCM6338_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -91,5 +91,7 @@
- #define bcm_memc_writel(v, o) bcm_rset_writel(RSET_MEMC, (v), (o))
- #define bcm_ddr_readl(o) bcm_rset_readl(RSET_DDR, (o))
- #define bcm_ddr_writel(v, o) bcm_rset_writel(RSET_DDR, (v), (o))
-+#define bcm_misc_readl(o) bcm_rset_readl(RSET_MISC, (o))
-+#define bcm_misc_writel(v, o) bcm_rset_writel(RSET_MISC, (v), (o))
-
- #endif /* ! BCM63XX_IO_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -15,6 +15,30 @@
- /* Clock Control register */
- #define PERF_CKCTL_REG 0x4
-
-+#define CKCTL_6328_PHYMIPS_EN (1 << 0)
-+#define CKCTL_6328_ADSL_QPROC_EN (1 << 1)
-+#define CKCTL_6328_ADSL_AFE_EN (1 << 2)
-+#define CKCTL_6328_ADSL_EN (1 << 3)
-+#define CKCTL_6328_MIPS_EN (1 << 4)
-+#define CKCTL_6328_SAR_EN (1 << 5)
-+#define CKCTL_6328_PCM_EN (1 << 6)
-+#define CKCTL_6328_USBD_EN (1 << 7)
-+#define CKCTL_6328_USBH_EN (1 << 8)
-+#define CKCTL_6328_HSSPI_EN (1 << 9)
-+#define CKCTL_6328_PCIE_EN (1 << 10)
-+#define CKCTL_6328_ROBOSW_EN (1 << 11)
-+
-+#define CKCTL_6328_ALL_SAFE_EN (CKCTL_6328_PHYMIPS_EN | \
-+ CKCTL_6328_ADSL_QPROC_EN | \
-+ CKCTL_6328_ADSL_AFE_EN | \
-+ CKCTL_6328_ADSL_EN | \
-+ CKCTL_6328_SAR_EN | \
-+ CKCTL_6328_PCM_EN | \
-+ CKCTL_6328_USBD_EN | \
-+ CKCTL_6328_USBH_EN | \
-+ CKCTL_6328_ROBOSW_EN | \
-+ CKCTL_6328_PCIE_EN)
-+
- #define CKCTL_6338_ADSLPHY_EN (1 << 0)
- #define CKCTL_6338_MPI_EN (1 << 1)
- #define CKCTL_6338_DRAM_EN (1 << 2)
-@@ -119,6 +143,7 @@
- #define SYS_PLL_SOFT_RESET 0x1
-
- /* Interrupt Mask register */
-+#define PERF_IRQMASK_6328_REG 0x20
- #define PERF_IRQMASK_6338_REG 0xc
- #define PERF_IRQMASK_6345_REG 0xc
- #define PERF_IRQMASK_6348_REG 0xc
-@@ -126,6 +151,7 @@
- #define PERF_IRQMASK_6368_REG 0x20
-
- /* Interrupt Status register */
-+#define PERF_IRQSTAT_6328_REG 0x28
- #define PERF_IRQSTAT_6338_REG 0x10
- #define PERF_IRQSTAT_6345_REG 0x10
- #define PERF_IRQSTAT_6348_REG 0x10
-@@ -133,6 +159,7 @@
- #define PERF_IRQSTAT_6368_REG 0x28
-
- /* External Interrupt Configuration register */
-+#define PERF_EXTIRQ_CFG_REG_6328 0x18
- #define PERF_EXTIRQ_CFG_REG_6338 0x14
- #define PERF_EXTIRQ_CFG_REG_6348 0x14
- #define PERF_EXTIRQ_CFG_REG_6358 0x14
-@@ -162,8 +189,21 @@
-
- /* Soft Reset register */
- #define PERF_SOFTRESET_REG 0x28
-+#define PERF_SOFTRESET_6328_REG 0x10
- #define PERF_SOFTRESET_6368_REG 0x10
-
-+#define SOFTRESET_6328_SPI_MASK (1 << 0)
-+#define SOFTRESET_6328_EPHY_MASK (1 << 1)
-+#define SOFTRESET_6328_SAR_MASK (1 << 2)
-+#define SOFTRESET_6328_ENETSW_MASK (1 << 3)
-+#define SOFTRESET_6328_USBS_MASK (1 << 4)
-+#define SOFTRESET_6328_USBH_MASK (1 << 5)
-+#define SOFTRESET_6328_PCM_MASK (1 << 6)
-+#define SOFTRESET_6328_PCIE_CORE_MASK (1 << 7)
-+#define SOFTRESET_6328_PCIE_MASK (1 << 8)
-+#define SOFTRESET_6328_PCIE_EXT_MASK (1 << 9)
-+#define SOFTRESET_6328_PCIE_HARD_MASK (1 << 10)
-+
- #define SOFTRESET_6338_SPI_MASK (1 << 0)
- #define SOFTRESET_6338_ENET_MASK (1 << 2)
- #define SOFTRESET_6338_USBH_MASK (1 << 3)
-@@ -307,6 +347,8 @@
- /* Watchdog reset length register */
- #define WDT_RSTLEN_REG 0x8
-
-+/* Watchdog soft reset register (BCM6328 only) */
-+#define WDT_SOFTRESET_REG 0xc
-
- /*************************************************************************
- * _REG relative to RSET_UARTx
-@@ -933,6 +975,8 @@
- * _REG relative to RSET_DDR
- *************************************************************************/
-
-+#define DDR_CSEND_REG 0x8
-+
- #define DDR_DMIPSPLLCFG_REG 0x18
- #define DMIPSPLLCFG_M1_SHIFT 0
- #define DMIPSPLLCFG_M1_MASK (0xff << DMIPSPLLCFG_M1_SHIFT)
-@@ -1122,4 +1166,14 @@
- #define SPI_SSOFFTIME_SHIFT 3
- #define SPI_BYTE_SWAP 0x80
-
-+/*************************************************************************
-+ * _REG relative to RSET_MISC
-+ *************************************************************************/
-+
-+#define MISC_STRAPBUS_6328_REG 0x240
-+#define STRAPBUS_6328_FCVO_SHIFT 7
-+#define STRAPBUS_6328_FCVO_MASK (0x1f << STRAPBUS_6328_FCVO_SHIFT)
-+#define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
-+#define STRAPBUS_6328_BOOT_SEL_NAND (0 << 28)
-+
- #endif /* BCM63XX_REGS_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -18,6 +18,7 @@ static inline int is_bcm63xx_internal_re
- if (offset >= 0xfff00000)
- return 1;
- break;
-+ case BCM6328_CPU_ID:
- case BCM6368_CPU_ID:
- if (offset >= 0xb0000000 && offset < 0xb1000000)
- return 1;
diff --git a/target/linux/brcm63xx/patches-3.3/026-MIPS-BCM63XX-Move-the-PCI-initialization-into-its-ow.patch b/target/linux/brcm63xx/patches-3.3/026-MIPS-BCM63XX-Move-the-PCI-initialization-into-its-ow.patch
deleted file mode 100644
index 0f44b4910a..0000000000
--- a/target/linux/brcm63xx/patches-3.3/026-MIPS-BCM63XX-Move-the-PCI-initialization-into-its-ow.patch
+++ /dev/null
@@ -1,61 +0,0 @@
-From b8420b9150fa03fcdfacd32e8c5ad286e208d5e9 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 13 Jun 2012 16:48:02 +0100
-Subject: [PATCH 5/8] MIPS: BCM63XX: Move the PCI initialization into its own function
-
-Also make the cpu check a bit more explicit.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: Maxime Bizon <mbizon@freebox.fr>
-Cc: Florian Fainelli <florian@openwrt.org>
-Cc: Kevin Cernekee <cernekee@gmail.com>
-Patchwork: https://patchwork.linux-mips.org/patch/3953/
-Reviewed-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/pci/pci-bcm63xx.c | 25 +++++++++++++++++--------
- 1 files changed, 17 insertions(+), 8 deletions(-)
-
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -94,17 +94,10 @@ static void bcm63xx_int_cfg_writel(u32 v
-
- void __iomem *pci_iospace_start;
-
--static int __init bcm63xx_pci_init(void)
-+static int __init bcm63xx_register_pci(void)
- {
- unsigned int mem_size;
- u32 val;
--
-- if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358() && !BCMCPU_IS_6368())
-- return -ENODEV;
--
-- if (!bcm63xx_pci_enabled)
-- return -ENODEV;
--
- /*
- * configuration access are done through IO space, remap 4
- * first bytes to access it from CPU.
-@@ -221,4 +214,20 @@ static int __init bcm63xx_pci_init(void)
- return 0;
- }
-
-+
-+static int __init bcm63xx_pci_init(void)
-+{
-+ if (!bcm63xx_pci_enabled)
-+ return -ENODEV;
-+
-+ switch (bcm63xx_get_cpu_id()) {
-+ case BCM6348_CPU_ID:
-+ case BCM6358_CPU_ID:
-+ case BCM6368_CPU_ID:
-+ return bcm63xx_register_pci();
-+ default:
-+ return -ENODEV;
-+ }
-+}
-+
- arch_initcall(bcm63xx_pci_init);
diff --git a/target/linux/brcm63xx/patches-3.3/027-MIPS-BCM63XX-Add-PCIe-Support-for-BCM6328.patch b/target/linux/brcm63xx/patches-3.3/027-MIPS-BCM63XX-Add-PCIe-Support-for-BCM6328.patch
deleted file mode 100644
index ff375cd2a9..0000000000
--- a/target/linux/brcm63xx/patches-3.3/027-MIPS-BCM63XX-Add-PCIe-Support-for-BCM6328.patch
+++ /dev/null
@@ -1,427 +0,0 @@
-From 45655e79f84e35c13b8964b961d804e64b3aca91 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 13 Jun 2012 17:07:13 +0100
-Subject: [PATCH 6/8] MIPS: BCM63XX: Add PCIe Support for BCM6328
-
-Add support for the PCIe port found on BCM6328.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: Maxime Bizon <mbizon@freebox.fr>
-Cc: Florian Fainelli <florian@openwrt.org>
-Cc: Kevin Cernekee <cernekee@gmail.com>
-Patchwork: https://patchwork.linux-mips.org/patch/3956/
-Reviewed-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/bcm63xx/Kconfig | 1 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 9 ++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h | 6 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 54 ++++++++++
- arch/mips/pci/ops-bcm63xx.c | 61 +++++++++++
- arch/mips/pci/pci-bcm63xx.c | 112 +++++++++++++++++++++
- arch/mips/pci/pci-bcm63xx.h | 5 +
- 7 files changed, 248 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -3,6 +3,7 @@ menu "CPU support"
-
- config BCM63XX_CPU_6328
- bool "support 6328 CPU"
-+ select HW_HAS_PCI
-
- config BCM63XX_CPU_6338
- bool "support 6338 CPU"
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -122,6 +122,7 @@ enum bcm63xx_regs_set {
- RSET_USBH_PRIV,
- RSET_MPI,
- RSET_PCMCIA,
-+ RSET_PCIE,
- RSET_DSL,
- RSET_ENET0,
- RSET_ENET1,
-@@ -188,6 +189,7 @@ enum bcm63xx_regs_set {
- #define BCM_6328_USBH_PRIV_BASE (0xdeadbeef)
- #define BCM_6328_MPI_BASE (0xdeadbeef)
- #define BCM_6328_PCMCIA_BASE (0xdeadbeef)
-+#define BCM_6328_PCIE_BASE (0xb0e40000)
- #define BCM_6328_SDRAM_REGS_BASE (0xdeadbeef)
- #define BCM_6328_DSL_BASE (0xb0001900)
- #define BCM_6328_UBUS_BASE (0xdeadbeef)
-@@ -232,6 +234,7 @@ enum bcm63xx_regs_set {
- #define BCM_6338_USBH_PRIV_BASE (0xdeadbeef)
- #define BCM_6338_MPI_BASE (0xfffe3160)
- #define BCM_6338_PCMCIA_BASE (0xdeadbeef)
-+#define BCM_6338_PCIE_BASE (0xdeadbeef)
- #define BCM_6338_SDRAM_REGS_BASE (0xfffe3100)
- #define BCM_6338_DSL_BASE (0xfffe1000)
- #define BCM_6338_UBUS_BASE (0xdeadbeef)
-@@ -279,6 +282,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_ENETSW_BASE (0xdeadbeef)
- #define BCM_6345_PCMCIA_BASE (0xfffe2028)
- #define BCM_6345_MPI_BASE (0xfffe2000)
-+#define BCM_6345_PCIE_BASE (0xdeadbeef)
- #define BCM_6345_OHCI0_BASE (0xfffe2100)
- #define BCM_6345_OHCI_PRIV_BASE (0xfffe2200)
- #define BCM_6345_USBH_PRIV_BASE (0xdeadbeef)
-@@ -320,6 +324,7 @@ enum bcm63xx_regs_set {
- #define BCM_6348_USBH_PRIV_BASE (0xdeadbeef)
- #define BCM_6348_MPI_BASE (0xfffe2000)
- #define BCM_6348_PCMCIA_BASE (0xfffe2054)
-+#define BCM_6348_PCIE_BASE (0xdeadbeef)
- #define BCM_6348_SDRAM_REGS_BASE (0xfffe2300)
- #define BCM_6348_M2M_BASE (0xfffe2800)
- #define BCM_6348_DSL_BASE (0xfffe3000)
-@@ -362,6 +367,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_USBH_PRIV_BASE (0xfffe1500)
- #define BCM_6358_MPI_BASE (0xfffe1000)
- #define BCM_6358_PCMCIA_BASE (0xfffe1054)
-+#define BCM_6358_PCIE_BASE (0xdeadbeef)
- #define BCM_6358_SDRAM_REGS_BASE (0xfffe2300)
- #define BCM_6358_M2M_BASE (0xdeadbeef)
- #define BCM_6358_DSL_BASE (0xfffe3000)
-@@ -405,6 +411,7 @@ enum bcm63xx_regs_set {
- #define BCM_6368_USBH_PRIV_BASE (0xb0001700)
- #define BCM_6368_MPI_BASE (0xb0001000)
- #define BCM_6368_PCMCIA_BASE (0xb0001054)
-+#define BCM_6368_PCIE_BASE (0xdeadbeef)
- #define BCM_6368_SDRAM_REGS_BASE (0xdeadbeef)
- #define BCM_6368_M2M_BASE (0xdeadbeef)
- #define BCM_6368_DSL_BASE (0xdeadbeef)
-@@ -453,6 +460,7 @@ extern const unsigned long *bcm63xx_regs
- __GEN_RSET_BASE(__cpu, USBH_PRIV) \
- __GEN_RSET_BASE(__cpu, MPI) \
- __GEN_RSET_BASE(__cpu, PCMCIA) \
-+ __GEN_RSET_BASE(__cpu, PCIE) \
- __GEN_RSET_BASE(__cpu, DSL) \
- __GEN_RSET_BASE(__cpu, ENET0) \
- __GEN_RSET_BASE(__cpu, ENET1) \
-@@ -493,6 +501,7 @@ extern const unsigned long *bcm63xx_regs
- [RSET_USBH_PRIV] = BCM_## __cpu ##_USBH_PRIV_BASE, \
- [RSET_MPI] = BCM_## __cpu ##_MPI_BASE, \
- [RSET_PCMCIA] = BCM_## __cpu ##_PCMCIA_BASE, \
-+ [RSET_PCIE] = BCM_## __cpu ##_PCIE_BASE, \
- [RSET_DSL] = BCM_## __cpu ##_DSL_BASE, \
- [RSET_ENET0] = BCM_## __cpu ##_ENET0_BASE, \
- [RSET_ENET1] = BCM_## __cpu ##_ENET1_BASE, \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h
-@@ -40,6 +40,10 @@
- #define BCM_CB_MEM_END_PA (BCM_CB_MEM_BASE_PA + \
- BCM_CB_MEM_SIZE - 1)
-
-+#define BCM_PCIE_MEM_BASE_PA 0x10f00000
-+#define BCM_PCIE_MEM_SIZE (16 * 1024 * 1024)
-+#define BCM_PCIE_MEM_END_PA (BCM_PCIE_MEM_BASE_PA + \
-+ BCM_PCIE_MEM_SIZE - 1)
-
- /*
- * Internal registers are accessed through KSEG3
-@@ -85,6 +89,8 @@
- #define bcm_mpi_writel(v, o) bcm_rset_writel(RSET_MPI, (v), (o))
- #define bcm_pcmcia_readl(o) bcm_rset_readl(RSET_PCMCIA, (o))
- #define bcm_pcmcia_writel(v, o) bcm_rset_writel(RSET_PCMCIA, (v), (o))
-+#define bcm_pcie_readl(o) bcm_rset_readl(RSET_PCIE, (o))
-+#define bcm_pcie_writel(v, o) bcm_rset_writel(RSET_PCIE, (v), (o))
- #define bcm_sdram_readl(o) bcm_rset_readl(RSET_SDRAM, (o))
- #define bcm_sdram_writel(v, o) bcm_rset_writel(RSET_SDRAM, (v), (o))
- #define bcm_memc_readl(o) bcm_rset_readl(RSET_MEMC, (o))
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1169,6 +1169,9 @@
- /*************************************************************************
- * _REG relative to RSET_MISC
- *************************************************************************/
-+#define MISC_SERDES_CTRL_REG 0x0
-+#define SERDES_PCIE_EN (1 << 0)
-+#define SERDES_PCIE_EXD_EN (1 << 15)
-
- #define MISC_STRAPBUS_6328_REG 0x240
- #define STRAPBUS_6328_FCVO_SHIFT 7
-@@ -1176,4 +1179,55 @@
- #define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
- #define STRAPBUS_6328_BOOT_SEL_NAND (0 << 28)
-
-+/*************************************************************************
-+ * _REG relative to RSET_PCIE
-+ *************************************************************************/
-+
-+#define PCIE_CONFIG2_REG 0x408
-+#define CONFIG2_BAR1_SIZE_EN 1
-+#define CONFIG2_BAR1_SIZE_MASK 0xf
-+
-+#define PCIE_IDVAL3_REG 0x43c
-+#define IDVAL3_CLASS_CODE_MASK 0xffffff
-+#define IDVAL3_SUBCLASS_SHIFT 8
-+#define IDVAL3_CLASS_SHIFT 16
-+
-+#define PCIE_DLSTATUS_REG 0x1048
-+#define DLSTATUS_PHYLINKUP (1 << 13)
-+
-+#define PCIE_BRIDGE_OPT1_REG 0x2820
-+#define OPT1_RD_BE_OPT_EN (1 << 7)
-+#define OPT1_RD_REPLY_BE_FIX_EN (1 << 9)
-+#define OPT1_PCIE_BRIDGE_HOLE_DET_EN (1 << 11)
-+#define OPT1_L1_INT_STATUS_MASK_POL (1 << 12)
-+
-+#define PCIE_BRIDGE_OPT2_REG 0x2824
-+#define OPT2_UBUS_UR_DECODE_DIS (1 << 2)
-+#define OPT2_TX_CREDIT_CHK_EN (1 << 4)
-+#define OPT2_CFG_TYPE1_BD_SEL (1 << 7)
-+#define OPT2_CFG_TYPE1_BUS_NO_SHIFT 16
-+#define OPT2_CFG_TYPE1_BUS_NO_MASK (0xff << OPT2_CFG_TYPE1_BUS_NO_SHIFT)
-+
-+#define PCIE_BRIDGE_BAR0_BASEMASK_REG 0x2828
-+#define PCIE_BRIDGE_BAR1_BASEMASK_REG 0x2830
-+#define BASEMASK_REMAP_EN (1 << 0)
-+#define BASEMASK_SWAP_EN (1 << 1)
-+#define BASEMASK_MASK_SHIFT 4
-+#define BASEMASK_MASK_MASK (0xfff << BASEMASK_MASK_SHIFT)
-+#define BASEMASK_BASE_SHIFT 20
-+#define BASEMASK_BASE_MASK (0xfff << BASEMASK_BASE_SHIFT)
-+
-+#define PCIE_BRIDGE_BAR0_REBASE_ADDR_REG 0x282c
-+#define PCIE_BRIDGE_BAR1_REBASE_ADDR_REG 0x2834
-+#define REBASE_ADDR_BASE_SHIFT 20
-+#define REBASE_ADDR_BASE_MASK (0xfff << REBASE_ADDR_BASE_SHIFT)
-+
-+#define PCIE_BRIDGE_RC_INT_MASK_REG 0x2854
-+#define PCIE_RC_INT_A (1 << 0)
-+#define PCIE_RC_INT_B (1 << 1)
-+#define PCIE_RC_INT_C (1 << 2)
-+#define PCIE_RC_INT_D (1 << 3)
-+
-+#define PCIE_DEVICE_OFFSET 0x8000
-+
- #endif /* BCM63XX_REGS_H_ */
---- a/arch/mips/pci/ops-bcm63xx.c
-+++ b/arch/mips/pci/ops-bcm63xx.c
-@@ -465,3 +465,64 @@ static void bcm63xx_fixup(struct pci_dev
-
- DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup);
- #endif
-+
-+static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn)
-+{
-+ switch (bus->number) {
-+ case PCIE_BUS_BRIDGE:
-+ return (PCI_SLOT(devfn) == 0);
-+ case PCIE_BUS_DEVICE:
-+ if (PCI_SLOT(devfn) == 0)
-+ return bcm_pcie_readl(PCIE_DLSTATUS_REG)
-+ & DLSTATUS_PHYLINKUP;
-+ default:
-+ return false;
-+ }
-+}
-+
-+static int bcm63xx_pcie_read(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 *val)
-+{
-+ u32 data;
-+ u32 reg = where & ~3;
-+
-+ if (!bcm63xx_pcie_can_access(bus, devfn))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ if (bus->number == PCIE_BUS_DEVICE)
-+ reg += PCIE_DEVICE_OFFSET;
-+
-+ data = bcm_pcie_readl(reg);
-+
-+ *val = postprocess_read(data, where, size);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+
-+}
-+
-+static int bcm63xx_pcie_write(struct pci_bus *bus, unsigned int devfn,
-+ int where, int size, u32 val)
-+{
-+ u32 data;
-+ u32 reg = where & ~3;
-+
-+ if (!bcm63xx_pcie_can_access(bus, devfn))
-+ return PCIBIOS_DEVICE_NOT_FOUND;
-+
-+ if (bus->number == PCIE_BUS_DEVICE)
-+ reg += PCIE_DEVICE_OFFSET;
-+
-+
-+ data = bcm_pcie_readl(reg);
-+
-+ data = preprocess_write(data, val, where, size);
-+ bcm_pcie_writel(data, reg);
-+
-+ return PCIBIOS_SUCCESSFUL;
-+}
-+
-+
-+struct pci_ops bcm63xx_pcie_ops = {
-+ .read = bcm63xx_pcie_read,
-+ .write = bcm63xx_pcie_write
-+};
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -10,6 +10,7 @@
- #include <linux/pci.h>
- #include <linux/kernel.h>
- #include <linux/init.h>
-+#include <linux/delay.h>
- #include <asm/bootinfo.h>
-
- #include "pci-bcm63xx.h"
-@@ -71,6 +72,26 @@ struct pci_controller bcm63xx_cb_control
- };
- #endif
-
-+static struct resource bcm_pcie_mem_resource = {
-+ .name = "bcm63xx PCIe memory space",
-+ .start = BCM_PCIE_MEM_BASE_PA,
-+ .end = BCM_PCIE_MEM_END_PA,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct resource bcm_pcie_io_resource = {
-+ .name = "bcm63xx PCIe IO space",
-+ .start = 0,
-+ .end = 0,
-+ .flags = 0,
-+};
-+
-+struct pci_controller bcm63xx_pcie_controller = {
-+ .pci_ops = &bcm63xx_pcie_ops,
-+ .io_resource = &bcm_pcie_io_resource,
-+ .mem_resource = &bcm_pcie_mem_resource,
-+};
-+
- static u32 bcm63xx_int_cfg_readl(u32 reg)
- {
- u32 tmp;
-@@ -94,6 +115,95 @@ static void bcm63xx_int_cfg_writel(u32 v
-
- void __iomem *pci_iospace_start;
-
-+static void __init bcm63xx_reset_pcie(void)
-+{
-+ u32 val;
-+
-+ /* enable clock */
-+ val = bcm_perf_readl(PERF_CKCTL_REG);
-+ val |= CKCTL_6328_PCIE_EN;
-+ bcm_perf_writel(val, PERF_CKCTL_REG);
-+
-+ /* enable SERDES */
-+ val = bcm_misc_readl(MISC_SERDES_CTRL_REG);
-+ val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN;
-+ bcm_misc_writel(val, MISC_SERDES_CTRL_REG);
-+
-+ /* reset the PCIe core */
-+ val = bcm_perf_readl(PERF_SOFTRESET_6328_REG);
-+
-+ val &= ~SOFTRESET_6328_PCIE_MASK;
-+ val &= ~SOFTRESET_6328_PCIE_CORE_MASK;
-+ val &= ~SOFTRESET_6328_PCIE_HARD_MASK;
-+ val &= ~SOFTRESET_6328_PCIE_EXT_MASK;
-+ bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
-+ mdelay(10);
-+
-+ val |= SOFTRESET_6328_PCIE_MASK;
-+ val |= SOFTRESET_6328_PCIE_CORE_MASK;
-+ val |= SOFTRESET_6328_PCIE_HARD_MASK;
-+ bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
-+ mdelay(10);
-+
-+ val |= SOFTRESET_6328_PCIE_EXT_MASK;
-+ bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
-+ mdelay(200);
-+}
-+
-+static int __init bcm63xx_register_pcie(void)
-+{
-+ u32 val;
-+
-+ bcm63xx_reset_pcie();
-+
-+ /* configure the PCIe bridge */
-+ val = bcm_pcie_readl(PCIE_BRIDGE_OPT1_REG);
-+ val |= OPT1_RD_BE_OPT_EN;
-+ val |= OPT1_RD_REPLY_BE_FIX_EN;
-+ val |= OPT1_PCIE_BRIDGE_HOLE_DET_EN;
-+ val |= OPT1_L1_INT_STATUS_MASK_POL;
-+ bcm_pcie_writel(val, PCIE_BRIDGE_OPT1_REG);
-+
-+ /* setup the interrupts */
-+ val = bcm_pcie_readl(PCIE_BRIDGE_RC_INT_MASK_REG);
-+ val |= PCIE_RC_INT_A | PCIE_RC_INT_B | PCIE_RC_INT_C | PCIE_RC_INT_D;
-+ bcm_pcie_writel(val, PCIE_BRIDGE_RC_INT_MASK_REG);
-+
-+ val = bcm_pcie_readl(PCIE_BRIDGE_OPT2_REG);
-+ /* enable credit checking and error checking */
-+ val |= OPT2_TX_CREDIT_CHK_EN;
-+ val |= OPT2_UBUS_UR_DECODE_DIS;
-+
-+ /* set device bus/func for the pcie device */
-+ val |= (PCIE_BUS_DEVICE << OPT2_CFG_TYPE1_BUS_NO_SHIFT);
-+ val |= OPT2_CFG_TYPE1_BD_SEL;
-+ bcm_pcie_writel(val, PCIE_BRIDGE_OPT2_REG);
-+
-+ /* setup class code as bridge */
-+ val = bcm_pcie_readl(PCIE_IDVAL3_REG);
-+ val &= ~IDVAL3_CLASS_CODE_MASK;
-+ val |= (PCI_CLASS_BRIDGE_PCI << IDVAL3_SUBCLASS_SHIFT);
-+ bcm_pcie_writel(val, PCIE_IDVAL3_REG);
-+
-+ /* disable bar1 size */
-+ val = bcm_pcie_readl(PCIE_CONFIG2_REG);
-+ val &= ~CONFIG2_BAR1_SIZE_MASK;
-+ bcm_pcie_writel(val, PCIE_CONFIG2_REG);
-+
-+ /* set bar0 to little endian */
-+ val = (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_BASE_SHIFT;
-+ val |= (BCM_PCIE_MEM_BASE_PA >> 20) << BASEMASK_MASK_SHIFT;
-+ val |= BASEMASK_REMAP_EN;
-+ bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_BASEMASK_REG);
-+
-+ val = (BCM_PCIE_MEM_BASE_PA >> 20) << REBASE_ADDR_BASE_SHIFT;
-+ bcm_pcie_writel(val, PCIE_BRIDGE_BAR0_REBASE_ADDR_REG);
-+
-+ register_pci_controller(&bcm63xx_pcie_controller);
-+
-+ return 0;
-+}
-+
- static int __init bcm63xx_register_pci(void)
- {
- unsigned int mem_size;
-@@ -221,6 +331,8 @@ static int __init bcm63xx_pci_init(void)
- return -ENODEV;
-
- switch (bcm63xx_get_cpu_id()) {
-+ case BCM6328_CPU_ID:
-+ return bcm63xx_register_pcie();
- case BCM6348_CPU_ID:
- case BCM6358_CPU_ID:
- case BCM6368_CPU_ID:
---- a/arch/mips/pci/pci-bcm63xx.h
-+++ b/arch/mips/pci/pci-bcm63xx.h
-@@ -13,11 +13,16 @@
- */
- #define CARDBUS_PCI_IDSEL 0x8
-
-+
-+#define PCIE_BUS_BRIDGE 0
-+#define PCIE_BUS_DEVICE 1
-+
- /*
- * defined in ops-bcm63xx.c
- */
- extern struct pci_ops bcm63xx_pci_ops;
- extern struct pci_ops bcm63xx_cb_ops;
-+extern struct pci_ops bcm63xx_pcie_ops;
-
- /*
- * defined in pci-bcm63xx.c
diff --git a/target/linux/brcm63xx/patches-3.3/028-MIPS-Expose-PCIe-drivers-for-MIPS.patch b/target/linux/brcm63xx/patches-3.3/028-MIPS-Expose-PCIe-drivers-for-MIPS.patch
deleted file mode 100644
index 3169ca2fae..0000000000
--- a/target/linux/brcm63xx/patches-3.3/028-MIPS-Expose-PCIe-drivers-for-MIPS.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 4831929b8c37aa866afca1498001c939377e5a67 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 13 Jun 2012 17:07:16 +0100
-Subject: [PATCH 7/8] MIPS: Expose PCIe drivers for MIPS
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
-Cc: linux-mips@linux-mips.org
-Cc: Maxime Bizon <mbizon@freebox.fr>
-Cc: Florian Fainelli <florian@openwrt.org>
-Cc: Kevin Cernekee <cernekee@gmail.com>
-Patchwork: https://patchwork.linux-mips.org/patch/3957/
-Reviewed-by: Florian Fainelli <florian@openwrt.org>
-Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
----
- arch/mips/Kconfig | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -2392,6 +2392,8 @@ config PCI_DOMAINS
-
- source "drivers/pci/Kconfig"
-
-+source "drivers/pci/pcie/Kconfig"
-+
- #
- # ISA support is now enabled via select. Too many systems still have the one
- # or other ISA chip on the board that users don't know about so don't expect
diff --git a/target/linux/brcm63xx/patches-3.3/030-MIPS-BCM63XX-Fix-BCM6345-clock-bits.patch b/target/linux/brcm63xx/patches-3.3/030-MIPS-BCM63XX-Fix-BCM6345-clock-bits.patch
deleted file mode 100644
index b33a8450b7..0000000000
--- a/target/linux/brcm63xx/patches-3.3/030-MIPS-BCM63XX-Fix-BCM6345-clock-bits.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-[PATCH] MIPS: BCM63XX: fix BCM6345 clock bits shifting
-
-BCM6345 has an intermediate 16-bits wide test control register between the
-peripheral identifier function, and its clock control register is only 16-bits
-wide contrary to other platforms where it is 32-bits wide. By shifting all
-clocks bits by 16-bits to the left we ensure they get written to the proper
-clock control register, without adding specific BCM6345 handling in the clock
-code.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -53,13 +53,13 @@
- CKCTL_6338_SAR_EN | \
- CKCTL_6338_SPI_EN)
-
--#define CKCTL_6345_CPU_EN (1 << 0)
--#define CKCTL_6345_BUS_EN (1 << 1)
--#define CKCTL_6345_EBI_EN (1 << 2)
--#define CKCTL_6345_UART_EN (1 << 3)
--#define CKCTL_6345_ADSLPHY_EN (1 << 4)
--#define CKCTL_6345_ENET_EN (1 << 7)
--#define CKCTL_6345_USBH_EN (1 << 8)
-+#define CKCTL_6345_CPU_EN (1 << 16)
-+#define CKCTL_6345_BUS_EN (1 << 17)
-+#define CKCTL_6345_EBI_EN (1 << 18)
-+#define CKCTL_6345_UART_EN (1 << 19)
-+#define CKCTL_6345_ADSLPHY_EN (1 << 20)
-+#define CKCTL_6345_ENET_EN (1 << 23)
-+#define CKCTL_6345_USBH_EN (1 << 24)
-
- #define CKCTL_6345_ALL_SAFE_EN (CKCTL_6345_ENET_EN | \
- CKCTL_6345_USBH_EN | \
diff --git a/target/linux/brcm63xx/patches-3.3/100-MIPS-BCM63XX-add-missing-include-for-bcm63xx_gpio.h.patch b/target/linux/brcm63xx/patches-3.3/100-MIPS-BCM63XX-add-missing-include-for-bcm63xx_gpio.h.patch
deleted file mode 100644
index f6b15ac6fe..0000000000
--- a/target/linux/brcm63xx/patches-3.3/100-MIPS-BCM63XX-add-missing-include-for-bcm63xx_gpio.h.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From a183d93bf0c6f9219ef1dd6e4948edf81c57ea3b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 2 Feb 2012 09:27:58 +0100
-Subject: [PATCH] MIPS: BCM63XX: add missing include for bcm63xx_gpio.h
-
-bcm63xx_gpio.h uses macros defined in bcm63xx_cpu.h without including it,
-leading to the following build failure:
-
- CC [M] drivers/mmc/core/cd-gpio.o
-In file included from arch/mips/include/asm/mach-bcm63xx/gpio.h:4:0,
- from arch/mips/include/asm/gpio.h:4,
- from include/linux/gpio.h:30,
- from drivers/mmc/core/cd-gpio.c:12:
-
-arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h: In function 'bcm63xx_gpio_count':
-arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h:10:2: error: implicit declaration of function 'bcm63xx_get_cpu_id'
-arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h:11:7: error: 'BCM6358_CPU_ID' undeclared (first use in this function)
-arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h:11:7: note: each undeclared identifier is reported only once for each function it appears in
-arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h:13:7: error: 'BCM6338_CPU_ID' undeclared (first use in this function)
-arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h:15:7: error: 'BCM6345_CPU_ID' undeclared (first use in this function)
-arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h:17:7: error: 'BCM6368_CPU_ID' undeclared (first use in this function)
-arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h:19:7: error: 'BCM6348_CPU_ID' undeclared (first use in this function)
-
-make[7]: *** [drivers/mmc/core/cd-gpio.o] Error 1
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 1 +
- 1 files changed, 1 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -2,6 +2,7 @@
- #define BCM63XX_GPIO_H
-
- #include <linux/init.h>
-+#include <bcm63xx_cpu.h>
-
- int __init bcm63xx_gpio_init(void);
-
diff --git a/target/linux/brcm63xx/patches-3.3/101-MTD-bcm63xxpart-remove-unused-variable.patch b/target/linux/brcm63xx/patches-3.3/101-MTD-bcm63xxpart-remove-unused-variable.patch
deleted file mode 100644
index 470f966635..0000000000
--- a/target/linux/brcm63xx/patches-3.3/101-MTD-bcm63xxpart-remove-unused-variable.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 2962bbe9cc807549c0705551c5b7be47e34e3fac Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 30 Apr 2012 09:32:56 +0200
-Subject: [PATCH 20/79] MTD: bcm63xxpart: remove unused variable
-
-namelen is never used, so drop it.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/bcm63xxpart.c | 11 +++--------
- 1 file changed, 3 insertions(+), 8 deletions(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -79,7 +79,6 @@ static int bcm63xx_parse_cfe_partitions(
- unsigned int rootfsaddr, kerneladdr, spareaddr;
- unsigned int rootfslen, kernellen, sparelen, totallen;
- unsigned int cfelen, nvramlen;
-- int namelen = 0;
- int i;
- u32 computed_crc;
- bool rootfs_first = false;
-@@ -143,15 +142,11 @@ static int bcm63xx_parse_cfe_partitions(
- }
-
- /* Determine number of partitions */
-- namelen = 8;
-- if (rootfslen > 0) {
-+ if (rootfslen > 0)
- nrparts++;
-- namelen += 6;
-- }
-- if (kernellen > 0) {
-+
-+ if (kernellen > 0)
- nrparts++;
-- namelen += 6;
-- }
-
- /* Ask kernel for more memory */
- parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
diff --git a/target/linux/brcm63xx/patches-3.3/102-MTD-bcm63xxpart-merge-sparelen-calculation.patch b/target/linux/brcm63xx/patches-3.3/102-MTD-bcm63xxpart-merge-sparelen-calculation.patch
deleted file mode 100644
index da24b1b858..0000000000
--- a/target/linux/brcm63xx/patches-3.3/102-MTD-bcm63xxpart-merge-sparelen-calculation.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From fd2ab39f22af4176eb3d23acbc4d1218cf835065 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 8 May 2012 09:47:32 +0200
-Subject: [PATCH 21/79] MTD: bcm63xxpart: merge sparelen calculation
-
-The length of the spare part is calculated the same way in both branches
-so move to a common place.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/bcm63xxpart.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -120,7 +120,6 @@ static int bcm63xx_parse_cfe_partitions(
- kerneladdr = kerneladdr - BCM63XX_EXTENDED_SIZE;
- rootfsaddr = rootfsaddr - BCM63XX_EXTENDED_SIZE;
- spareaddr = roundup(totallen, master->erasesize) + cfelen;
-- sparelen = master->size - spareaddr - nvramlen;
-
- if (rootfsaddr < kerneladdr) {
- /* default Broadcom layout */
-@@ -138,8 +137,8 @@ static int bcm63xx_parse_cfe_partitions(
- rootfslen = 0;
- rootfsaddr = 0;
- spareaddr = cfelen;
-- sparelen = master->size - cfelen - nvramlen;
- }
-+ sparelen = master->size - spareaddr - nvramlen;
-
- /* Determine number of partitions */
- if (rootfslen > 0)
diff --git a/target/linux/brcm63xx/patches-3.3/103-MTD-bcm63xxpart-make-fixed-part-length-calculation-m.patch b/target/linux/brcm63xx/patches-3.3/103-MTD-bcm63xxpart-make-fixed-part-length-calculation-m.patch
deleted file mode 100644
index ca0cddde94..0000000000
--- a/target/linux/brcm63xx/patches-3.3/103-MTD-bcm63xxpart-make-fixed-part-length-calculation-m.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 465f1b3ff24dbf3bec43dce344a7bc2640e05ffc Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 8 May 2012 09:53:07 +0200
-Subject: [PATCH 22/79] MTD: bcm63xxpart: make fixed part length calculation
- more generic
-
-The CFE does not use 4K sectors even if the flash supports it, so
-for the fixed partitions like CFE itself or NVRAM the erase block
-size is always 64k or bigger.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/bcm63xxpart.c | 11 +++++++----
- 1 file changed, 7 insertions(+), 4 deletions(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -37,8 +37,7 @@
-
- #define BCM63XX_EXTENDED_SIZE 0xBFC00000 /* Extended flash address */
-
--#define BCM63XX_MIN_CFE_SIZE 0x10000 /* always at least 64KiB */
--#define BCM63XX_MIN_NVRAM_SIZE 0x10000 /* always at least 64KiB */
-+#define BCM63XX_CFE_BLOCK_SIZE 0x10000 /* always at least 64KiB */
-
- #define BCM63XX_CFE_MAGIC_OFFSET 0x4e0
-
-@@ -79,6 +78,7 @@ static int bcm63xx_parse_cfe_partitions(
- unsigned int rootfsaddr, kerneladdr, spareaddr;
- unsigned int rootfslen, kernellen, sparelen, totallen;
- unsigned int cfelen, nvramlen;
-+ unsigned int cfe_erasesize;
- int i;
- u32 computed_crc;
- bool rootfs_first = false;
-@@ -86,8 +86,11 @@ static int bcm63xx_parse_cfe_partitions(
- if (bcm63xx_detect_cfe(master))
- return -EINVAL;
-
-- cfelen = max_t(uint32_t, master->erasesize, BCM63XX_MIN_CFE_SIZE);
-- nvramlen = max_t(uint32_t, master->erasesize, BCM63XX_MIN_NVRAM_SIZE);
-+ cfe_erasesize = max_t(uint32_t, master->erasesize,
-+ BCM63XX_CFE_BLOCK_SIZE);
-+
-+ cfelen = cfe_erasesize;
-+ nvramlen = cfe_erasesize;
-
- /* Allocate memory for buffer */
- buf = vmalloc(sizeof(struct bcm_tag));
diff --git a/target/linux/brcm63xx/patches-3.3/104-MTD-bcm63xxpart-move-the-last-curpart-to-its-correct.patch b/target/linux/brcm63xx/patches-3.3/104-MTD-bcm63xxpart-move-the-last-curpart-to-its-correct.patch
deleted file mode 100644
index 8e05803ff0..0000000000
--- a/target/linux/brcm63xx/patches-3.3/104-MTD-bcm63xxpart-move-the-last-curpart-to-its-correct.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From d5173b2c806f4039679b001f1b55a3c245afdf68 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 8 May 2012 10:02:13 +0200
-Subject: [PATCH 23/79] MTD: bcm63xxpart: move the last curpart++ to its
- correct place
-
-The line belongs above the comment, not below it.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/bcm63xxpart.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -190,9 +190,9 @@ static int bcm63xx_parse_cfe_partitions(
- parts[curpart].name = "nvram";
- parts[curpart].offset = master->size - nvramlen;
- parts[curpart].size = nvramlen;
-+ curpart++;
-
- /* Global partition "linux" to make easy firmware upgrade */
-- curpart++;
- parts[curpart].name = "linux";
- parts[curpart].offset = cfelen;
- parts[curpart].size = master->size - cfelen - nvramlen;
diff --git a/target/linux/brcm63xx/patches-3.3/105-MTD-bcm63xxpart-use-correct-printk-format-for-partit.patch b/target/linux/brcm63xx/patches-3.3/105-MTD-bcm63xxpart-use-correct-printk-format-for-partit.patch
deleted file mode 100644
index 60396abae8..0000000000
--- a/target/linux/brcm63xx/patches-3.3/105-MTD-bcm63xxpart-use-correct-printk-format-for-partit.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 55aa355612ce55dc1943f116ea49e795a098b60c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 8 May 2012 10:03:27 +0200
-Subject: [PATCH 24/79] MTD: bcm63xxpart: use correct printk format for
- partitions
-
-Use ll to be able to remove the casts.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/bcm63xxpart.c | 5 ++---
- 1 file changed, 2 insertions(+), 3 deletions(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -198,9 +198,8 @@ static int bcm63xx_parse_cfe_partitions(
- parts[curpart].size = master->size - cfelen - nvramlen;
-
- for (i = 0; i < nrparts; i++)
-- pr_info("Partition %d is %s offset %lx and length %lx\n", i,
-- parts[i].name, (long unsigned int)(parts[i].offset),
-- (long unsigned int)(parts[i].size));
-+ pr_info("Partition %d is %s offset %llx and length %llx\n", i,
-+ parts[i].name, parts[i].offset, parts[i].size);
-
- pr_info("Spare partition is offset %x and length %x\n", spareaddr,
- sparelen);
diff --git a/target/linux/brcm63xx/patches-3.3/106-bcm63xx_watchdog_section_mismatch.patch b/target/linux/brcm63xx/patches-3.3/106-bcm63xx_watchdog_section_mismatch.patch
deleted file mode 100644
index ae4157774a..0000000000
--- a/target/linux/brcm63xx/patches-3.3/106-bcm63xx_watchdog_section_mismatch.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/watchdog/bcm63xx_wdt.c
-+++ b/drivers/watchdog/bcm63xx_wdt.c
-@@ -301,7 +301,7 @@ static void bcm63xx_wdt_shutdown(struct
- bcm63xx_wdt_pause();
- }
-
--static struct platform_driver bcm63xx_wdt = {
-+static struct platform_driver bcm63xx_wdt_driver = {
- .probe = bcm63xx_wdt_probe,
- .remove = __devexit_p(bcm63xx_wdt_remove),
- .shutdown = bcm63xx_wdt_shutdown,
-@@ -311,7 +311,7 @@ static struct platform_driver bcm63xx_wd
- }
- };
-
--module_platform_driver(bcm63xx_wdt);
-+module_platform_driver(bcm63xx_wdt_driver);
-
- MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
- MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
diff --git a/target/linux/brcm63xx/patches-3.3/107-MIPS-BCM63XX-Fix-USB-IRQ-definitions-for-6328.patch b/target/linux/brcm63xx/patches-3.3/107-MIPS-BCM63XX-Fix-USB-IRQ-definitions-for-6328.patch
deleted file mode 100644
index c9d0421a28..0000000000
--- a/target/linux/brcm63xx/patches-3.3/107-MIPS-BCM63XX-Fix-USB-IRQ-definitions-for-6328.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 960e1ef3c5b2d69a4a5a6984b6408d65221dd86c Mon Sep 17 00:00:00 2001
-From: Kevin Cernekee <cernekee@gmail.com>
-Date: Sat, 23 Jun 2012 04:14:55 +0000
-Subject: [PATCH 06/81] MIPS: BCM63XX: Fix USB IRQ definitions for 6328
-
-OHCI/EHCI are in the high (second) word. Not currently used by any
-driver.
-
-Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -602,8 +602,8 @@ enum bcm63xx_irq {
- #define BCM_6328_ENET0_IRQ 0
- #define BCM_6328_ENET1_IRQ 0
- #define BCM_6328_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
--#define BCM_6328_OHCI0_IRQ (IRQ_INTERNAL_BASE + 9)
--#define BCM_6328_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10)
-+#define BCM_6328_OHCI0_IRQ (BCM_6328_HIGH_IRQ_BASE + 9)
-+#define BCM_6328_EHCI0_IRQ (BCM_6328_HIGH_IRQ_BASE + 10)
- #define BCM_6328_PCMCIA_IRQ 0
- #define BCM_6328_ENET0_RXDMA_IRQ 0
- #define BCM_6328_ENET0_TXDMA_IRQ 0
diff --git a/target/linux/brcm63xx/patches-3.3/108-BCM63XX-Add-register-definitions-for-USBD-depen.patch b/target/linux/brcm63xx/patches-3.3/108-BCM63XX-Add-register-definitions-for-USBD-depen.patch
deleted file mode 100644
index c2130a563e..0000000000
--- a/target/linux/brcm63xx/patches-3.3/108-BCM63XX-Add-register-definitions-for-USBD-depen.patch
+++ /dev/null
@@ -1,62 +0,0 @@
-From 21bb8141c205ae48d331787debb6b272add90ac7 Mon Sep 17 00:00:00 2001
-From: Kevin Cernekee <cernekee@gmail.com>
-Date: Sat, 23 Jun 2012 04:14:54 +0000
-Subject: [PATCH 05/81] MIPS: BCM63XX: Add register definitions for USBD
- dependencies
-
-The USB 2.0 device depends on some functionality in other blocks, such
-as GPIO and USBH. Add those register definitions here.
-
-Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 6 +++---
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 8 ++++++++
- 2 files changed, 11 insertions(+), 3 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -184,9 +184,9 @@ enum bcm63xx_regs_set {
- #define BCM_6328_SPI_BASE (0xdeadbeef)
- #define BCM_6328_UDC0_BASE (0xdeadbeef)
- #define BCM_6328_USBDMA_BASE (0xdeadbeef)
--#define BCM_6328_OHCI0_BASE (0xdeadbeef)
-+#define BCM_6328_OHCI0_BASE (0xb0002600)
- #define BCM_6328_OHCI_PRIV_BASE (0xdeadbeef)
--#define BCM_6328_USBH_PRIV_BASE (0xdeadbeef)
-+#define BCM_6328_USBH_PRIV_BASE (0xb0002700)
- #define BCM_6328_MPI_BASE (0xdeadbeef)
- #define BCM_6328_PCMCIA_BASE (0xdeadbeef)
- #define BCM_6328_PCIE_BASE (0xb0e40000)
-@@ -199,7 +199,7 @@ enum bcm63xx_regs_set {
- #define BCM_6328_ENETDMAC_BASE (0xb000da00)
- #define BCM_6328_ENETDMAS_BASE (0xb000dc00)
- #define BCM_6328_ENETSW_BASE (0xb0e00000)
--#define BCM_6328_EHCI0_BASE (0x10002500)
-+#define BCM_6328_EHCI0_BASE (0xb0002500)
- #define BCM_6328_SDRAM_BASE (0xdeadbeef)
- #define BCM_6328_MEMC_BASE (0xdeadbeef)
- #define BCM_6328_DDR_BASE (0xb0003000)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -543,6 +543,12 @@
- #define GPIO_MODE_6368_SPI_SSN5 (1 << 31)
-
-
-+#define GPIO_PINMUX_OTHR_REG 0x24
-+#define GPIO_PINMUX_OTHR_6328_USB_SHIFT 12
-+#define GPIO_PINMUX_OTHR_6328_USB_MASK (3 << GPIO_PINMUX_OTHR_6328_USB_SHIFT)
-+#define GPIO_PINMUX_OTHR_6328_USB_HOST (1 << GPIO_PINMUX_OTHR_6328_USB_SHIFT)
-+#define GPIO_PINMUX_OTHR_6328_USB_DEV (2 << GPIO_PINMUX_OTHR_6328_USB_SHIFT)
-+
- #define GPIO_BASEMODE_6368_REG 0x38
- #define GPIO_BASEMODE_6368_UART2 0x1
- #define GPIO_BASEMODE_6368_GPIO 0x0
-@@ -770,6 +776,8 @@
- #define USBH_PRIV_SWAP_6358_REG 0x0
- #define USBH_PRIV_SWAP_6368_REG 0x1c
-
-+#define USBH_PRIV_SWAP_USBD_SHIFT 6
-+#define USBH_PRIV_SWAP_USBD_MASK (1 << USBH_PRIV_SWAP_USBD_SHIFT)
- #define USBH_PRIV_SWAP_EHCI_ENDN_SHIFT 4
- #define USBH_PRIV_SWAP_EHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_EHCI_ENDN_SHIFT)
- #define USBH_PRIV_SWAP_EHCI_DATA_SHIFT 3
diff --git a/target/linux/brcm63xx/patches-3.3/109-bcm63xx-fix-transfer-bits_per_words-check.patch b/target/linux/brcm63xx/patches-3.3/109-bcm63xx-fix-transfer-bits_per_words-check.patch
deleted file mode 100644
index 37d9d49d6f..0000000000
--- a/target/linux/brcm63xx/patches-3.3/109-bcm63xx-fix-transfer-bits_per_words-check.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From fbef4dff80be6254e36ab5b9c655d248a3991ded Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 24 Nov 2012 12:08:22 +0100
-Subject: [PATCH 3.7] spi/bcm63xx: fix transfer bits_per_words check
-
-Transfers often do not have bits_per_words set, so use the spi device's
-bits_per_words in this case.
-
-This fixes the driver rejecting valid transfers e.g. generated by
-spi_write() or spi_read().
-
-Cc: stable@vger.kernel.org
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/spi/spi-bcm63xx.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -103,7 +103,8 @@ static int bcm63xx_spi_check_transfer(st
- {
- u8 bits_per_word;
-
-- bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word;
-+ bits_per_word = (t && t->bits_per_word) ?
-+ t->bits_per_word : spi->bits_per_word;
- if (bits_per_word != 8) {
- dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
- __func__, bits_per_word);
diff --git a/target/linux/brcm63xx/patches-3.3/110-spi-bcm63xx-fix-multi-transfer-messages.patch b/target/linux/brcm63xx/patches-3.3/110-spi-bcm63xx-fix-multi-transfer-messages.patch
deleted file mode 100644
index 941de48c3f..0000000000
--- a/target/linux/brcm63xx/patches-3.3/110-spi-bcm63xx-fix-multi-transfer-messages.patch
+++ /dev/null
@@ -1,279 +0,0 @@
-From 0f2ae1e1282ff64f74a5e36f7da874f94911225e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Wed, 14 Nov 2012 22:22:33 +0100
-Subject: [PATCH] spi/bcm63xx: fix multi transfer messages
-
-The BCM63XX SPI controller does not support keeping CS asserted after
-sending its buffer. This breaks common usages like spi_write_then_read,
-where it is expected to be kept active during the whole transfers.
-
-Work around this by combining the transfers into one if the buffer
-allows. For spi_write_then_read, use the prepend byte feature to write
-to "prepend" the write if it is less than 15 bytes, allowing the whole
-fifo size for the read.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
-Tested on a SPI conntected switch which required keeping CS active between
-the register read command and reading the register contents.
-
-Based on Mark's spi/next.
-
-Not sure if this is stable material, as it's quite invasive.
-
- drivers/spi/spi-bcm63xx.c | 172 ++++++++++++++++++++++++++++++---------------
- 1 file changed, 117 insertions(+), 55 deletions(-)
-
---- a/drivers/spi/spi-bcm63xx.c
-+++ b/drivers/spi/spi-bcm63xx.c
-@@ -38,6 +38,8 @@
- #define PFX KBUILD_MODNAME
- #define DRV_VER "0.1.2"
-
-+#define BCM63XX_SPI_MAX_PREPEND 15
-+
- struct bcm63xx_spi {
- struct completion done;
-
-@@ -50,16 +52,10 @@ struct bcm63xx_spi {
- unsigned int msg_type_shift;
- unsigned int msg_ctl_width;
-
-- /* Data buffers */
-- const unsigned char *tx_ptr;
-- unsigned char *rx_ptr;
--
- /* data iomem */
- u8 __iomem *tx_io;
- const u8 __iomem *rx_io;
-
-- int remaining_bytes;
--
- struct clk *clk;
- struct platform_device *pdev;
- };
-@@ -184,50 +180,60 @@ static int bcm63xx_spi_setup(struct spi_
- return 0;
- }
-
--/* Fill the TX FIFO with as many bytes as possible */
--static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs)
--{
-- u8 size;
--
-- /* Fill the Tx FIFO with as many bytes as possible */
-- size = bs->remaining_bytes < bs->fifo_size ? bs->remaining_bytes :
-- bs->fifo_size;
-- memcpy_toio(bs->tx_io, bs->tx_ptr, size);
-- bs->remaining_bytes -= size;
--}
--
- static unsigned int bcm63xx_txrx_bufs(struct spi_device *spi,
-- struct spi_transfer *t)
-+ struct spi_transfer *first,
-+ unsigned int n_transfers)
- {
- struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master);
- u16 msg_ctl;
- u16 cmd;
-+ unsigned int i, timeout, total_len = 0, prepend_len = 0, len = 0;
-+ struct spi_transfer *t = first;
-+ u8 rx_tail;
-+ bool do_rx = false;
-+ bool do_tx = false;
-
- /* Disable the CMD_DONE interrupt */
- bcm_spi_writeb(bs, 0, SPI_INT_MASK);
-
-- dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n",
-- t->tx_buf, t->rx_buf, t->len);
-+ if (n_transfers > 1 && t->tx_buf && t->len <= BCM63XX_SPI_MAX_PREPEND)
-+ prepend_len = t->len;
-+
-+ /* prepare the buffer */
-+ for (i = 0; i < n_transfers; i++) {
-+ if (t->tx_buf) {
-+ do_tx = true;
-+ memcpy_toio(bs->tx_io + total_len, t->tx_buf, t->len);
-+
-+ /* don't prepend more than one tx */
-+ if (t != first)
-+ prepend_len = 0;
-+ }
-+
-+ if (t->rx_buf) {
-+ do_rx = true;
-+ if (t == first)
-+ prepend_len = 0;
-+ }
-
-- /* Transmitter is inhibited */
-- bs->tx_ptr = t->tx_buf;
-- bs->rx_ptr = t->rx_buf;
--
-- if (t->tx_buf) {
-- bs->remaining_bytes = t->len;
-- bcm63xx_spi_fill_tx_fifo(bs);
-+ total_len += t->len;
-+
-+ t = list_entry(t->transfer_list.next, struct spi_transfer,
-+ transfer_list);
- }
-
-+ len = total_len - prepend_len;
-+
- init_completion(&bs->done);
-
- /* Fill in the Message control register */
-- msg_ctl = (t->len << SPI_BYTE_CNT_SHIFT);
-+ msg_ctl = (len << SPI_BYTE_CNT_SHIFT);
-
-- if (t->rx_buf && t->tx_buf)
-+ if (do_rx && do_tx && prepend_len == 0)
- msg_ctl |= (SPI_FD_RW << bs->msg_type_shift);
-- else if (t->rx_buf)
-+ else if (do_rx)
- msg_ctl |= (SPI_HD_R << bs->msg_type_shift);
-- else if (t->tx_buf)
-+ else if (do_tx)
- msg_ctl |= (SPI_HD_W << bs->msg_type_shift);
-
- switch (bs->msg_ctl_width) {
-@@ -245,14 +251,41 @@ static unsigned int bcm63xx_txrx_bufs(st
-
- /* Issue the transfer */
- cmd = SPI_CMD_START_IMMEDIATE;
-- cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
-+ cmd |= (prepend_len << SPI_CMD_PREPEND_BYTE_CNT_SHIFT);
- cmd |= (spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT);
- bcm_spi_writew(bs, cmd, SPI_CMD);
-
- /* Enable the CMD_DONE interrupt */
- bcm_spi_writeb(bs, SPI_INTR_CMD_DONE, SPI_INT_MASK);
-
-- return t->len - bs->remaining_bytes;
-+ timeout = wait_for_completion_timeout(&bs->done, HZ);
-+ if (!timeout)
-+ return -ETIMEDOUT;
-+
-+ /* read out all data */
-+ rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-+
-+ if (do_rx && rx_tail != len)
-+ return -EINVAL;
-+
-+ if (!rx_tail)
-+ return total_len;
-+
-+ len = 0;
-+ t = first;
-+ /* Read out all the data */
-+ for (i = 0; i < n_transfers; i++) {
-+ if (t->rx_buf)
-+ memcpy_fromio(t->rx_buf, bs->rx_io + len, t->len);
-+
-+ if (t != first || prepend_len == 0)
-+ len += t->len;
-+
-+ t = list_entry(t->transfer_list.next, struct spi_transfer,
-+ transfer_list);
-+ }
-+
-+ return total_len;
- }
-
- static int bcm63xx_spi_prepare_transfer(struct spi_master *master)
-@@ -277,42 +310,71 @@ static int bcm63xx_spi_transfer_one(stru
- struct spi_message *m)
- {
- struct bcm63xx_spi *bs = spi_master_get_devdata(master);
-- struct spi_transfer *t;
-+ struct spi_transfer *t, *first = NULL;
- struct spi_device *spi = m->spi;
- int status = 0;
-- unsigned int timeout = 0;
-+ unsigned int n_transfers = 0, total_len = 0;
-+ bool can_use_prepend = false;
-
-+ /*
-+ * This SPI controller does not support keeping CS active after a
-+ * transfer, so we need to combine the transfers into one until we may
-+ * deassert CS.
-+ */
- list_for_each_entry(t, &m->transfers, transfer_list) {
-- unsigned int len = t->len;
-- u8 rx_tail;
--
- status = bcm63xx_spi_check_transfer(spi, t);
- if (status < 0)
- goto exit;
-
-- /* configure adapter for a new transfer */
-- bcm63xx_spi_setup_transfer(spi, t);
-+ if (!first)
-+ first = t;
-
-- while (len) {
-- /* send the data */
-- len -= bcm63xx_txrx_bufs(spi, t);
--
-- timeout = wait_for_completion_timeout(&bs->done, HZ);
-- if (!timeout) {
-- status = -ETIMEDOUT;
-- goto exit;
-- }
-+ n_transfers++;
-+ total_len += t->len;
-+
-+ if (n_transfers == 2 && !first->rx_buf && !t->tx_buf &&
-+ first->len <= BCM63XX_SPI_MAX_PREPEND)
-+ can_use_prepend = true;
-+ else if (can_use_prepend && t->tx_buf)
-+ can_use_prepend = false;
-+
-+ if ((can_use_prepend &&
-+ total_len > (bs->fifo_size + BCM63XX_SPI_MAX_PREPEND)) ||
-+ (!can_use_prepend && total_len > bs->fifo_size)) {
-+ status = -EINVAL;
-+ goto exit;
-+ }
-
-- /* read out all data */
-- rx_tail = bcm_spi_readb(bs, SPI_RX_TAIL);
-+ /* all transfers have to be made at the same speed */
-+ if (t->speed_hz != first->speed_hz) {
-+ status = -EINVAL;
-+ goto exit;
-+ }
-
-- /* Read out all the data */
-- if (rx_tail)
-- memcpy_fromio(bs->rx_ptr, bs->rx_io, rx_tail);
-+ /* CS will be deasserted directly after the transfer */
-+ if (t->delay_usecs) {
-+ status = -EINVAL;
-+ goto exit;
- }
-
-- m->actual_length += t->len;
-+ if (t->cs_change ||
-+ list_is_last(&t->transfer_list, &m->transfers)) {
-+ /* configure adapter for a new transfer */
-+ bcm63xx_spi_setup_transfer(spi, first);
-+
-+ status = bcm63xx_txrx_bufs(spi, first, n_transfers);
-+ if (status < 0)
-+ goto exit;
-+
-+ m->actual_length += status;
-+ first = NULL;
-+ status = 0;
-+ n_transfers = 0;
-+ total_len = 0;
-+ can_use_prepend = false;
-+ }
- }
-+
- exit:
- m->status = status;
- spi_finalize_current_message(master);
diff --git a/target/linux/brcm63xx/patches-3.3/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch b/target/linux/brcm63xx/patches-3.3/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch
deleted file mode 100644
index 00dc9c90ee..0000000000
--- a/target/linux/brcm63xx/patches-3.3/201-SPI-Allow-specifying-the-parsers-for-SPI-flash.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 3f650fc30aa0badf9d02842ce396cea3eef2eeaa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 1 Jul 2011 23:16:47 +0200
-Subject: [PATCH 49/79] SPI: Allow specifying the parsers for SPI flash
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- include/linux/spi/flash.h | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -2,7 +2,7 @@
- #define LINUX_SPI_FLASH_H
-
- struct mtd_partition;
--
-+struct mtd_part_parser_data;
- /**
- * struct flash_platform_data: board-specific flash data
- * @name: optional flash device name (eg, as used with mtdparts=)
-@@ -10,6 +10,8 @@ struct mtd_partition;
- * @nr_parts: number of mtd_partitions for static partitoning
- * @type: optional flash device type (e.g. m25p80 vs m25p64), for use
- * with chips that can't be queried for JEDEC or other IDs
-+ * @part_probe_types: optional list of MTD parser names to use for
-+ * partitioning
- *
- * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
- * provide information about SPI flash parts (such as DataFlash) to
-@@ -25,6 +27,7 @@ struct flash_platform_data {
-
- char *type;
-
-+ const char **part_probe_types;
- /* we'll likely add more ... use JEDEC IDs, etc */
- };
-
diff --git a/target/linux/brcm63xx/patches-3.3/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch b/target/linux/brcm63xx/patches-3.3/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch
deleted file mode 100644
index 486ec3a6df..0000000000
--- a/target/linux/brcm63xx/patches-3.3/202-MTD-DEVICES-m25p80-use-parsers-if-provided-in-flash-.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From c7c3c338cb25d7f55ddb3f6bfbf3572758ca3896 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 10 Nov 2011 16:53:08 +0100
-Subject: [PATCH 50/79] MTD: DEVICES: m25p80: use parsers if provided in flash
- platform data
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/devices/m25p80.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -986,7 +986,8 @@ static int __devinit m25p_probe(struct s
- /* partitions should match sector boundaries; and it may be good to
- * use readonly partitions for writeprotected sectors (BP2..BP0).
- */
-- return mtd_device_parse_register(&flash->mtd, NULL, &ppdata,
-+ return mtd_device_parse_register(&flash->mtd,
-+ data ? data->part_probe_types : NULL, &ppdata,
- data ? data->parts : NULL,
- data ? data->nr_parts : 0);
- }
diff --git a/target/linux/brcm63xx/patches-3.3/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch b/target/linux/brcm63xx/patches-3.3/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
deleted file mode 100644
index 847b6959ea..0000000000
--- a/target/linux/brcm63xx/patches-3.3/203-MTD-DEVICES-m25p80-add-support-for-limiting-reads.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 5fb4e8d7287ac8fcb33aae8b1e9e22c5a3c392bd Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 10 Nov 2011 17:33:40 +0100
-Subject: [PATCH 51/79] MTD: DEVICES: m25p80: add support for limiting reads
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/mtd/devices/m25p80.c | 29 +++++++++++++++++++++++++++--
- include/linux/spi/flash.h | 4 ++++
- 2 files changed, 31 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -100,6 +100,7 @@ struct m25p {
- u16 addr_width;
- u8 erase_opcode;
- u8 *command;
-+ int max_transfer_len;
- };
-
- static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd)
-@@ -346,10 +347,9 @@ static int m25p80_erase(struct mtd_info
- * Read an address range from the flash chip. The address range
- * may be any size provided it is within the physical boundaries.
- */
--static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
-+static int __m25p80_read(struct m25p *flash, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
- {
-- struct m25p *flash = mtd_to_m25p(mtd);
- struct spi_transfer t[2];
- struct spi_message m;
-
-@@ -408,6 +408,28 @@ static int m25p80_read(struct mtd_info *
- return 0;
- }
-
-+static int m25p80_read(struct mtd_info *mtd, loff_t from, size_t len,
-+ size_t *retlen, u_char *buf)
-+{
-+ struct m25p *flash = mtd_to_m25p(mtd);
-+ size_t off;
-+ size_t read_len = flash->max_transfer_len;
-+ size_t part_len;
-+ int ret = 0;
-+
-+ if (!read_len)
-+ return __m25p80_read(flash, from, len, retlen, buf);
-+
-+ *retlen = 0;
-+
-+ for (off = 0; off < len && !ret; off += read_len) {
-+ ret = __m25p80_read(flash, from + off, min(len - off, read_len),
-+ &part_len, buf + off);
-+ *retlen += part_len;
-+ }
-+
-+ return ret;
-+}
- /*
- * Write an address range to the flash chip. Data must be written in
- * FLASH_PAGESIZE chunks. The address range may be any size provided
-@@ -897,6 +919,9 @@ static int __devinit m25p_probe(struct s
- return -ENOMEM;
- }
-
-+ if (data)
-+ flash->max_transfer_len = data->max_transfer_len;
-+
- flash->spi = spi;
- mutex_init(&flash->lock);
- dev_set_drvdata(&spi->dev, flash);
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -13,6 +13,8 @@ struct mtd_part_parser_data;
- * @part_probe_types: optional list of MTD parser names to use for
- * partitioning
- *
-+ * @max_transfer_len: option maximum read/write length limitation for
-+ * SPI controllers not able to transfer any length commands.
- * Board init code (in arch/.../mach-xxx/board-yyy.c files) can
- * provide information about SPI flash parts (such as DataFlash) to
- * help set up the device and its appropriate default partitioning.
-@@ -28,6 +30,8 @@ struct flash_platform_data {
- char *type;
-
- const char **part_probe_types;
-+
-+ unsigned int max_transfer_len;
- /* we'll likely add more ... use JEDEC IDs, etc */
- };
-
diff --git a/target/linux/brcm63xx/patches-3.3/300-reset_buttons.patch b/target/linux/brcm63xx/patches-3.3/300-reset_buttons.patch
deleted file mode 100644
index 0e1d6f8d95..0000000000
--- a/target/linux/brcm63xx/patches-3.3/300-reset_buttons.patch
+++ /dev/null
@@ -1,116 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -12,6 +12,8 @@
- #include <linux/string.h>
- #include <linux/platform_device.h>
- #include <linux/ssb/ssb.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -28,6 +30,9 @@
-
- #define PFX "board_bcm963xx: "
-
-+#define BCM963XX_KEYS_POLL_INTERVAL 20
-+#define BCM963XX_KEYS_DEBOUNCE_INTERVAL (BCM963XX_KEYS_POLL_INTERVAL * 3)
-+
- static struct bcm963xx_nvram nvram;
- static unsigned int mac_addr_used;
- static struct board_info board;
-@@ -293,6 +298,16 @@ static struct board_info __initdata boar
- .active_low = 1,
- },
- },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 33,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
- };
-
- static struct board_info __initdata board_96348gw = {
-@@ -351,6 +366,16 @@ static struct board_info __initdata boar
- .active_low = 1,
- },
- },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 36,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
- };
-
- static struct board_info __initdata board_FAST2404 = {
-@@ -821,11 +846,23 @@ static struct platform_device bcm63xx_gp
- .dev.platform_data = &bcm63xx_led_data,
- };
-
-+static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
-+ .poll_interval = BCM963XX_KEYS_POLL_INTERVAL,
-+};
-+
-+static struct platform_device bcm63xx_gpio_keys_device = {
-+ .name = "gpio-keys-polled",
-+ .id = 0,
-+ .dev.platform_data = &bcm63xx_gpio_keys_data,
-+};
-+
- /*
- * third stage init callback, register all board devices.
- */
- int __init board_register_devices(void)
- {
-+ int button_count = 0;
-+
- if (board.has_uart0)
- bcm63xx_uart_register(0);
-
-@@ -868,5 +905,16 @@ int __init board_register_devices(void)
-
- platform_device_register(&bcm63xx_gpio_leds);
-
-+ /* count number of BUTTONs defined by this device */
-+ while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
-+ button_count++;
-+
-+ if (button_count) {
-+ bcm63xx_gpio_keys_data.nbuttons = button_count;
-+ bcm63xx_gpio_keys_data.buttons = board.buttons;
-+
-+ platform_device_register(&bcm63xx_gpio_keys_device);
-+ }
-+
- return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -3,6 +3,7 @@
-
- #include <linux/types.h>
- #include <linux/gpio.h>
-+#include <linux/gpio_keys.h>
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
-@@ -57,6 +58,9 @@ struct board_info {
-
- /* GPIO LEDs */
- struct gpio_led leds[5];
-+
-+ /* Buttons */
-+ struct gpio_keys_button buttons[4];
- };
-
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/301-led_count.patch b/target/linux/brcm63xx/patches-3.3/301-led_count.patch
deleted file mode 100644
index b6c1196a52..0000000000
--- a/target/linux/brcm63xx/patches-3.3/301-led_count.patch
+++ /dev/null
@@ -1,41 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -862,6 +862,7 @@ static struct platform_device bcm63xx_gp
- int __init board_register_devices(void)
- {
- int button_count = 0;
-+ int led_count = 0;
-
- if (board.has_uart0)
- bcm63xx_uart_register(0);
-@@ -900,10 +901,16 @@ int __init board_register_devices(void)
-
- bcm63xx_flash_register();
-
-- bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds);
-- bcm63xx_led_data.leds = board.leds;
-+ /* count number of LEDs defined by this device */
-+ while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
-+ led_count++;
-+
-+ if (led_count) {
-+ bcm63xx_led_data.num_leds = led_count;
-+ bcm63xx_led_data.leds = board.leds;
-
-- platform_device_register(&bcm63xx_gpio_leds);
-+ platform_device_register(&bcm63xx_gpio_leds);
-+ }
-
- /* count number of BUTTONs defined by this device */
- while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -57,7 +57,7 @@ struct board_info {
- struct bcm63xx_dsp_platform_data dsp;
-
- /* GPIO LEDs */
-- struct gpio_led leds[5];
-+ struct gpio_led leds[14];
-
- /* Buttons */
- struct gpio_keys_button buttons[4];
diff --git a/target/linux/brcm63xx/patches-3.3/302-extended-platform-devices.patch b/target/linux/brcm63xx/patches-3.3/302-extended-platform-devices.patch
deleted file mode 100644
index b48ef733bf..0000000000
--- a/target/linux/brcm63xx/patches-3.3/302-extended-platform-devices.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -899,6 +899,9 @@ int __init board_register_devices(void)
-
- bcm63xx_spi_register();
-
-+ if (board.num_devs)
-+ platform_add_devices(board.devs, board.num_devs);
-+
- bcm63xx_flash_register();
-
- /* count number of LEDs defined by this device */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -61,6 +61,10 @@ struct board_info {
-
- /* Buttons */
- struct gpio_keys_button buttons[4];
-+
-+ /* Additional platform devices */
-+ struct platform_device **devs;
-+ unsigned int num_devs;
- };
-
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/303-spi-board-info.patch b/target/linux/brcm63xx/patches-3.3/303-spi-board-info.patch
deleted file mode 100644
index 517a53b565..0000000000
--- a/target/linux/brcm63xx/patches-3.3/303-spi-board-info.patch
+++ /dev/null
@@ -1,33 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -14,6 +14,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
-+#include <linux/spi/spi.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -902,6 +903,9 @@ int __init board_register_devices(void)
- if (board.num_devs)
- platform_add_devices(board.devs, board.num_devs);
-
-+ if (board.num_spis)
-+ spi_register_board_info(board.spis, board.num_spis);
-+
- bcm63xx_flash_register();
-
- /* count number of LEDs defined by this device */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -65,6 +65,10 @@ struct board_info {
- /* Additional platform devices */
- struct platform_device **devs;
- unsigned int num_devs;
-+
-+ /* Additional platform devices */
-+ struct spi_board_info *spis;
-+ unsigned int num_spis;
- };
-
- #endif /* ! BOARD_BCM963XX_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/304-boardid_fixup.patch b/target/linux/brcm63xx/patches-3.3/304-boardid_fixup.patch
deleted file mode 100644
index c3dd8e9898..0000000000
--- a/target/linux/brcm63xx/patches-3.3/304-boardid_fixup.patch
+++ /dev/null
@@ -1,61 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -28,12 +28,16 @@
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
- #include <board_bcm963xx.h>
-+#include <linux/bcm963xx_tag.h>
-
- #define PFX "board_bcm963xx: "
-
- #define BCM963XX_KEYS_POLL_INTERVAL 20
- #define BCM963XX_KEYS_DEBOUNCE_INTERVAL (BCM963XX_KEYS_POLL_INTERVAL * 3)
-
-+#define CFE_OFFSET_64K 0x10000
-+#define CFE_OFFSET_128K 0x20000
-+
- static struct bcm963xx_nvram nvram;
- static unsigned int mac_addr_used;
- static struct board_info board;
-@@ -724,6 +728,29 @@ static int board_get_mac_address(u8 *mac
- return 0;
- }
-
-+static void __init boardid_fixup(u8 *boot_addr)
-+{
-+ struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
-+
-+ /* check if bcm_tag is at 64k offset */
-+ if (strncmp(nvram.name, tag->board_id, BOARDID_LEN) != 0) {
-+ /* else try 128k */
-+ tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K);
-+ if (strncmp(nvram.name, tag->board_id, BOARDID_LEN) != 0) {
-+ /* No tag found */
-+ printk(KERN_DEBUG "No bcm_tag found!\n");
-+ return;
-+ }
-+ }
-+ /* check if we should override the boardid */
-+ if (tag->information1[0] != '+')
-+ return;
-+
-+ strncpy(nvram.name, &tag->information1[1], BOARDID_LEN);
-+
-+ printk(KERN_INFO "Overriding boardid with '%s'\n", nvram.name);
-+}
-+
- /*
- * early init callback, read nvram data from flash and checksum it
- */
-@@ -771,6 +798,11 @@ void __init board_prom_init(void)
- return;
- }
-
-+ if (strcmp(cfe_version, "unknown") != 0) {
-+ /* cfe present */
-+ boardid_fixup(boot_addr);
-+ }
-+
- /* find board by name */
- for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
- if (strncmp(nvram.name, bcm963xx_boards[i]->name,
diff --git a/target/linux/brcm63xx/patches-3.3/305-missing_ext_irq_bits.patch b/target/linux/brcm63xx/patches-3.3/305-missing_ext_irq_bits.patch
deleted file mode 100644
index 703f4b54b1..0000000000
--- a/target/linux/brcm63xx/patches-3.3/305-missing_ext_irq_bits.patch
+++ /dev/null
@@ -1,96 +0,0 @@
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -56,8 +56,8 @@ static void __internal_irq_unmask_64(uns
- #define is_ext_irq_cascaded 0
- #define ext_irq_start 0
- #define ext_irq_end 0
--#define ext_irq_count 0
--#define ext_irq_cfg_reg1 0
-+#define ext_irq_count 4
-+#define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6345
- #define ext_irq_cfg_reg2 0
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
-@@ -143,11 +143,15 @@ static void bcm63xx_init_irq(void)
- irq_stat_addr += PERF_IRQSTAT_6338_REG;
- irq_mask_addr += PERF_IRQMASK_6338_REG;
- irq_bits = 32;
-+ ext_irq_count = 4;
-+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6338;
- break;
- case BCM6345_CPU_ID:
- irq_stat_addr += PERF_IRQSTAT_6345_REG;
- irq_mask_addr += PERF_IRQMASK_6345_REG;
- irq_bits = 32;
-+ ext_irq_count = 4;
-+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6345;
- break;
- case BCM6348_CPU_ID:
- irq_stat_addr += PERF_IRQSTAT_6348_REG;
-@@ -434,7 +438,8 @@ static int bcm63xx_external_irq_set_type
- reg = bcm_perf_readl(regaddr);
- irq %= 4;
-
-- if (BCMCPU_IS_6348()) {
-+ switch (bcm63xx_get_cpu_id()) {
-+ case BCM6348_CPU_ID:
- if (levelsense)
- reg |= EXTIRQ_CFG_LEVELSENSE_6348(irq);
- else
-@@ -447,9 +452,12 @@ static int bcm63xx_external_irq_set_type
- reg |= EXTIRQ_CFG_BOTHEDGE_6348(irq);
- else
- reg &= ~EXTIRQ_CFG_BOTHEDGE_6348(irq);
-- }
-+ break;
-
-- if (BCMCPU_IS_6338() || BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
-+ case BCM6338_CPU_ID:
-+ case BCM6345_CPU_ID:
-+ case BCM6358_CPU_ID:
-+ case BCM6368_CPU_ID:
- if (levelsense)
- reg |= EXTIRQ_CFG_LEVELSENSE(irq);
- else
-@@ -462,6 +470,9 @@ static int bcm63xx_external_irq_set_type
- reg |= EXTIRQ_CFG_BOTHEDGE(irq);
- else
- reg &= ~EXTIRQ_CFG_BOTHEDGE(irq);
-+ break;
-+ default:
-+ BUG();
- }
-
- bcm_perf_writel(reg, regaddr);
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -74,6 +74,9 @@ void bcm63xx_machine_reboot(void)
- case BCM6338_CPU_ID:
- perf_regs[0] = PERF_EXTIRQ_CFG_REG_6338;
- break;
-+ case BCM6345_CPU_ID:
-+ perf_regs[0] = PERF_EXTIRQ_CFG_REG_6345;
-+ break;
- case BCM6348_CPU_ID:
- perf_regs[0] = PERF_EXTIRQ_CFG_REG_6348;
- break;
-@@ -83,6 +86,9 @@ void bcm63xx_machine_reboot(void)
- }
-
- for (i = 0; i < 2; i++) {
-+ if (!perf_regs[i])
-+ break;
-+
- reg = bcm_perf_readl(perf_regs[i]);
- if (BCMCPU_IS_6348()) {
- reg &= ~EXTIRQ_CFG_MASK_ALL_6348;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -161,6 +161,7 @@
- /* External Interrupt Configuration register */
- #define PERF_EXTIRQ_CFG_REG_6328 0x18
- #define PERF_EXTIRQ_CFG_REG_6338 0x14
-+#define PERF_EXTIRQ_CFG_REG_6345 0x14
- #define PERF_EXTIRQ_CFG_REG_6348 0x14
- #define PERF_EXTIRQ_CFG_REG_6358 0x14
- #define PERF_EXTIRQ_CFG_REG_6368 0x18
diff --git a/target/linux/brcm63xx/patches-3.3/306-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch b/target/linux/brcm63xx/patches-3.3/306-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch
deleted file mode 100644
index aa7ef8bbdb..0000000000
--- a/target/linux/brcm63xx/patches-3.3/306-Revert-MIPS-BCM63XX-Call-board_register_device-from-.patch
+++ /dev/null
@@ -1,23 +0,0 @@
-From a7d2622b6614fdca504c074a0cd307d5a1165c30 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 8 May 2012 09:39:01 +0200
-Subject: [PATCH 04/59] Revert "MIPS: BCM63XX: Call board_register_device from device_initcall()"
-
-This commit causes a race between PCI scan and SSB fallback SPROM handler
-registration, causing the wifi to not work on slower systems. The only
-subsystem touched from board_register_device is platform device
-registration, which should be safe as an arch init call.
-
-This reverts commit d64ed7ada2f689d2c62af1892ca55e47d3653e36.
----
- arch/mips/bcm63xx/setup.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -157,4 +157,4 @@ int __init bcm63xx_register_devices(void
- return board_register_devices();
- }
-
--device_initcall(bcm63xx_register_devices);
-+arch_initcall(bcm63xx_register_devices);
diff --git a/target/linux/brcm63xx/patches-3.3/307-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch b/target/linux/brcm63xx/patches-3.3/307-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch
deleted file mode 100644
index 1418d65bf4..0000000000
--- a/target/linux/brcm63xx/patches-3.3/307-MIPS-BCM63XX-allow-second-UART-on-BCM6328.patch
+++ /dev/null
@@ -1,22 +0,0 @@
-From c110865541e2d3782c412af9d48c016de5a64d9c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 14 Jun 2011 21:14:39 +0200
-Subject: [PATCH 42/79] MIPS: BCM63XX: allow second UART on BCM6328
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-uart.c | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/dev-uart.c
-+++ b/arch/mips/bcm63xx/dev-uart.c
-@@ -54,7 +54,8 @@ int __init bcm63xx_uart_register(unsigne
- if (id >= ARRAY_SIZE(bcm63xx_uart_devices))
- return -ENODEV;
-
-- if (id == 1 && (!BCMCPU_IS_6358() && !BCMCPU_IS_6368()))
-+ if (id == 1 && !BCMCPU_IS_6328() && !BCMCPU_IS_6358() &&
-+ !BCMCPU_IS_6368())
- return -ENODEV;
-
- if (id == 0) {
diff --git a/target/linux/brcm63xx/patches-3.3/308-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch b/target/linux/brcm63xx/patches-3.3/308-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch
deleted file mode 100644
index 8a11f8266e..0000000000
--- a/target/linux/brcm63xx/patches-3.3/308-MIPS-BCM63XX-expose-the-HS-SPI-clock.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From 5aeb6273a610f8aab090b3499827177eb41311ba Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 12 Nov 2011 12:19:09 +0100
-Subject: [PATCH 53/79] MIPS: BCM63XX: expose the HS SPI clock
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 22 ++++++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -194,6 +194,26 @@ static struct clk clk_spi = {
- };
-
- /*
-+ * SPI clock
-+ */
-+static void hsspi_set(struct clk *clk, int enable)
-+{
-+ u32 mask;
-+
-+ if (BCMCPU_IS_6328())
-+ mask = CKCTL_6328_HSSPI_EN;
-+ else
-+ return;
-+
-+ bcm_hwclock_set(mask, enable);
-+}
-+
-+static struct clk clk_hsspi = {
-+ .set = hsspi_set,
-+};
-+
-+
-+/*
- * XTM clock
- */
- static void xtm_set(struct clk *clk, int enable)
-@@ -286,6 +306,8 @@ struct clk *clk_get(struct device *dev,
- return &clk_usbh;
- if (!strcmp(id, "spi"))
- return &clk_spi;
-+ if (!strcmp(id, "hsspi"))
-+ return &clk_hsspi;
- if (!strcmp(id, "xtm"))
- return &clk_xtm;
- if (!strcmp(id, "periph"))
diff --git a/target/linux/brcm63xx/patches-3.3/309-MIPS-BCM63XX-add-HSSPI-register-definitions.patch b/target/linux/brcm63xx/patches-3.3/309-MIPS-BCM63XX-add-HSSPI-register-definitions.patch
deleted file mode 100644
index 5e2cd96d35..0000000000
--- a/target/linux/brcm63xx/patches-3.3/309-MIPS-BCM63XX-add-HSSPI-register-definitions.patch
+++ /dev/null
@@ -1,211 +0,0 @@
-From 70f970222bc1096689ae1bffeb9ed09a7c4bed07 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 12 Nov 2011 12:19:55 +0100
-Subject: [PATCH 28/60] MIPS: BCM63XX: add HSSPI register definitions
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 18 ++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 47 +++++++++++++++++++++
- 2 files changed, 65 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -116,6 +116,7 @@ enum bcm63xx_regs_set {
- RSET_UART1,
- RSET_GPIO,
- RSET_SPI,
-+ RSET_HSSPI,
- RSET_UDC0,
- RSET_OHCI0,
- RSET_OHCI_PRIV,
-@@ -159,6 +160,7 @@ enum bcm63xx_regs_set {
- #define RSET_ENETDMA_SIZE 2048
- #define RSET_ENETSW_SIZE 65536
- #define RSET_UART_SIZE 24
-+#define RSET_HSSPI_SIZE 1536
- #define RSET_UDC_SIZE 256
- #define RSET_OHCI_SIZE 256
- #define RSET_EHCI_SIZE 256
-@@ -182,6 +184,7 @@ enum bcm63xx_regs_set {
- #define BCM_6328_UART1_BASE (0xb0000120)
- #define BCM_6328_GPIO_BASE (0xb0000080)
- #define BCM_6328_SPI_BASE (0xdeadbeef)
-+#define BCM_6328_HSSPI_BASE (0xb0001000)
- #define BCM_6328_UDC0_BASE (0xdeadbeef)
- #define BCM_6328_USBDMA_BASE (0xdeadbeef)
- #define BCM_6328_OHCI0_BASE (0xb0002600)
-@@ -227,6 +230,7 @@ enum bcm63xx_regs_set {
- #define BCM_6338_UART1_BASE (0xdeadbeef)
- #define BCM_6338_GPIO_BASE (0xfffe0400)
- #define BCM_6338_SPI_BASE (0xfffe0c00)
-+#define BCM_6338_HSSPI_BASE (0xdeadbeef)
- #define BCM_6338_UDC0_BASE (0xdeadbeef)
- #define BCM_6338_USBDMA_BASE (0xfffe2400)
- #define BCM_6338_OHCI0_BASE (0xdeadbeef)
-@@ -273,6 +277,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_UART1_BASE (0xdeadbeef)
- #define BCM_6345_GPIO_BASE (0xfffe0400)
- #define BCM_6345_SPI_BASE (0xdeadbeef)
-+#define BCM_6345_HSSPI_BASE (0xdeadbeef)
- #define BCM_6345_UDC0_BASE (0xdeadbeef)
- #define BCM_6345_USBDMA_BASE (0xfffe2800)
- #define BCM_6345_ENET0_BASE (0xfffe1800)
-@@ -318,6 +323,7 @@ enum bcm63xx_regs_set {
- #define BCM_6348_UART1_BASE (0xdeadbeef)
- #define BCM_6348_GPIO_BASE (0xfffe0400)
- #define BCM_6348_SPI_BASE (0xfffe0c00)
-+#define BCM_6348_HSSPI_BASE (0xdeadbeef)
- #define BCM_6348_UDC0_BASE (0xfffe1000)
- #define BCM_6348_OHCI0_BASE (0xfffe1b00)
- #define BCM_6348_OHCI_PRIV_BASE (0xfffe1c00)
-@@ -361,6 +367,7 @@ enum bcm63xx_regs_set {
- #define BCM_6358_UART1_BASE (0xfffe0120)
- #define BCM_6358_GPIO_BASE (0xfffe0080)
- #define BCM_6358_SPI_BASE (0xfffe0800)
-+#define BCM_6358_HSSPI_BASE (0xdeadbeef)
- #define BCM_6358_UDC0_BASE (0xfffe0800)
- #define BCM_6358_OHCI0_BASE (0xfffe1400)
- #define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef)
-@@ -405,6 +412,7 @@ enum bcm63xx_regs_set {
- #define BCM_6368_UART1_BASE (0xb0000120)
- #define BCM_6368_GPIO_BASE (0xb0000080)
- #define BCM_6368_SPI_BASE (0xb0000800)
-+#define BCM_6368_HSSPI_BASE (0xdeadbeef)
- #define BCM_6368_UDC0_BASE (0xdeadbeef)
- #define BCM_6368_OHCI0_BASE (0xb0001600)
- #define BCM_6368_OHCI_PRIV_BASE (0xdeadbeef)
-@@ -454,6 +462,7 @@ extern const unsigned long *bcm63xx_regs
- __GEN_RSET_BASE(__cpu, UART1) \
- __GEN_RSET_BASE(__cpu, GPIO) \
- __GEN_RSET_BASE(__cpu, SPI) \
-+ __GEN_RSET_BASE(__cpu, HSSPI) \
- __GEN_RSET_BASE(__cpu, UDC0) \
- __GEN_RSET_BASE(__cpu, OHCI0) \
- __GEN_RSET_BASE(__cpu, OHCI_PRIV) \
-@@ -495,6 +504,7 @@ extern const unsigned long *bcm63xx_regs
- [RSET_UART1] = BCM_## __cpu ##_UART1_BASE, \
- [RSET_GPIO] = BCM_## __cpu ##_GPIO_BASE, \
- [RSET_SPI] = BCM_## __cpu ##_SPI_BASE, \
-+ [RSET_HSSPI] = BCM_## __cpu ##_HSSPI_BASE, \
- [RSET_UDC0] = BCM_## __cpu ##_UDC0_BASE, \
- [RSET_OHCI0] = BCM_## __cpu ##_OHCI0_BASE, \
- [RSET_OHCI_PRIV] = BCM_## __cpu ##_OHCI_PRIV_BASE, \
-@@ -567,6 +577,7 @@ enum bcm63xx_irq {
- IRQ_ENET0,
- IRQ_ENET1,
- IRQ_ENET_PHY,
-+ IRQ_HSSPI,
- IRQ_OHCI0,
- IRQ_EHCI0,
- IRQ_ENET0_RXDMA,
-@@ -602,6 +613,7 @@ enum bcm63xx_irq {
- #define BCM_6328_ENET0_IRQ 0
- #define BCM_6328_ENET1_IRQ 0
- #define BCM_6328_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6328_HSSPI_IRQ (IRQ_INTERNAL_BASE + 29)
- #define BCM_6328_OHCI0_IRQ (BCM_6328_HIGH_IRQ_BASE + 9)
- #define BCM_6328_EHCI0_IRQ (BCM_6328_HIGH_IRQ_BASE + 10)
- #define BCM_6328_PCMCIA_IRQ 0
-@@ -640,6 +652,7 @@ enum bcm63xx_irq {
- #define BCM_6338_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
- #define BCM_6338_ENET1_IRQ 0
- #define BCM_6338_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6338_HSSPI_IRQ 0
- #define BCM_6338_OHCI0_IRQ 0
- #define BCM_6338_EHCI0_IRQ 0
- #define BCM_6338_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15)
-@@ -671,6 +684,7 @@ enum bcm63xx_irq {
- #define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
- #define BCM_6345_ENET1_IRQ 0
- #define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6345_HSSPI_IRQ 0
- #define BCM_6345_OHCI0_IRQ 0
- #define BCM_6345_EHCI0_IRQ 0
- #define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1)
-@@ -702,6 +716,7 @@ enum bcm63xx_irq {
- #define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
- #define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7)
- #define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6348_HSSPI_IRQ 0
- #define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12)
- #define BCM_6348_EHCI0_IRQ 0
- #define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20)
-@@ -733,6 +748,7 @@ enum bcm63xx_irq {
- #define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8)
- #define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6)
- #define BCM_6358_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6358_HSSPI_IRQ 0
- #define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
- #define BCM_6358_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10)
- #define BCM_6358_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15)
-@@ -773,6 +789,7 @@ enum bcm63xx_irq {
- #define BCM_6368_ENET0_IRQ 0
- #define BCM_6368_ENET1_IRQ 0
- #define BCM_6368_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 15)
-+#define BCM_6368_HSSPI_IRQ 0
- #define BCM_6368_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5)
- #define BCM_6368_EHCI0_IRQ (IRQ_INTERNAL_BASE + 7)
- #define BCM_6368_PCMCIA_IRQ 0
-@@ -813,6 +830,7 @@ extern const int *bcm63xx_irqs;
- [IRQ_ENET0] = BCM_## __cpu ##_ENET0_IRQ, \
- [IRQ_ENET1] = BCM_## __cpu ##_ENET1_IRQ, \
- [IRQ_ENET_PHY] = BCM_## __cpu ##_ENET_PHY_IRQ, \
-+ [IRQ_HSSPI] = BCM_## __cpu ##_HSSPI_IRQ, \
- [IRQ_OHCI0] = BCM_## __cpu ##_OHCI0_IRQ, \
- [IRQ_EHCI0] = BCM_## __cpu ##_EHCI0_IRQ, \
- [IRQ_ENET0_RXDMA] = BCM_## __cpu ##_ENET0_RXDMA_IRQ, \
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1239,4 +1239,51 @@
-
- #define PCIE_DEVICE_OFFSET 0x8000
-
-+/*************************************************************************
-+ * _REG relative to RSET_HSSPI
-+ *************************************************************************/
-+
-+#define HSSPI_GLOBAL_CTRL_REG 0x0
-+#define GLOBAL_CTRL_CLK_POLARITY (1 << 17)
-+#define GLOBAL_CTRL_CLK_GATE_SSOFF (1 << 16)
-+
-+#define HSSPI_GLOBAL_EXT_TRIGGER_REG 0x4
-+
-+#define HSSPI_INT_STATUS_REG 0x8
-+#define HSSPI_INT_STATUS_MASKED_REG 0xc
-+#define HSSPI_INT_MASK_REG 0x10
-+
-+#define HSSPI_PING0_CMD_DONE (1 << 0)
-+
-+#define HSSPI_INT_CLEAR_ALL 0xff001f1f
-+
-+#define HSSPI_PINGPONG_COMMAND_REG(x) (0x80 + (x) * 0x40)
-+#define PINGPONG_CMD_COMMAND_MASK 0xf
-+#define PINGPONG_COMMAND_NOOP 0
-+#define PINGPONG_COMMAND_START_NOW 1
-+#define PINGPONG_COMMAND_START_TRIGGER 2
-+#define PINGPONG_COMMAND_HALT 3
-+#define PINGPONG_COMMAND_FLUSH 4
-+#define PINGPONG_CMD_PROFILE_SHIFT 8
-+#define PINGPONG_CMD_SS_SHIFT 12
-+
-+#define HSSPI_PINGPONG_STATUS_REG(x) (0x84 + (x) * 0x40)
-+
-+#define HSSPI_PROFILE_CLK_CTRL_REG(x) (0x100 + (x) * 0x20)
-+#define CLK_CTRL_ACCUM_RST_ON_LOOP (1 << 15)
-+
-+#define HSSPI_PROFILE_SIGNAL_CTRL_REG(x) (0x104 + (x) * 0x20)
-+#define SIGNAL_CTRL_LATCH_RISING (1 << 12)
-+#define SIGNAL_CTRL_LAUNCH_RISING (1 << 13)
-+#define SIGNAL_CTRL_ASYNC_INPUT_PATH (1 << 16)
-+
-+#define HSSPI_PROFILE_MODE_CTRL_REG(x) (0x108 + (x) * 0x20)
-+#define MODE_CTRL_MULTIDATA_RD_STRT_SHIFT 8
-+#define MODE_CTRL_MULTIDATA_WR_STRT_SHIFT 12
-+#define MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT 16
-+#define MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT 18
-+#define MODE_CTRL_PREPENDBYTE_CNT_SHIFT 24
-+
-+#define HSSPI_FIFO_REG(x) (0x200 + (x) * 0x200)
-+
- #endif /* BCM63XX_REGS_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/310-board_leds_naming.patch b/target/linux/brcm63xx/patches-3.3/310-board_leds_naming.patch
deleted file mode 100644
index df4ddb445f..0000000000
--- a/target/linux/brcm63xx/patches-3.3/310-board_leds_naming.patch
+++ /dev/null
@@ -1,267 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -61,28 +61,28 @@ static struct board_info __initdata boar
-
- .leds = {
- {
-- .name = "adsl",
-+ .name = "96338GW:green:adsl",
- .gpio = 3,
- .active_low = 1,
- },
- {
-- .name = "ses",
-+ .name = "96338GW:green:ses",
- .gpio = 5,
- .active_low = 1,
- },
- {
-- .name = "ppp-fail",
-+ .name = "96338GW:green:ppp-fail",
- .gpio = 4,
- .active_low = 1,
- },
- {
-- .name = "power",
-+ .name = "96338GW:green:power",
- .gpio = 0,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
-- .name = "stop",
-+ .name = "96338GW:green:stop",
- .gpio = 1,
- .active_low = 1,
- }
-@@ -102,28 +102,28 @@ static struct board_info __initdata boar
-
- .leds = {
- {
-- .name = "adsl",
-+ .name = "96338W:green:adsl",
- .gpio = 3,
- .active_low = 1,
- },
- {
-- .name = "ses",
-+ .name = "96338W:green:ses",
- .gpio = 5,
- .active_low = 1,
- },
- {
-- .name = "ppp-fail",
-+ .name = "96338W:green:ppp-fail",
- .gpio = 4,
- .active_low = 1,
- },
- {
-- .name = "power",
-+ .name = "96338W:green:power",
- .gpio = 0,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
-- .name = "stop",
-+ .name = "96338W:green:stop",
- .gpio = 1,
- .active_low = 1,
- },
-@@ -162,29 +162,29 @@ static struct board_info __initdata boar
-
- .leds = {
- {
-- .name = "adsl-fail",
-+ .name = "96348R:green:adsl-fail",
- .gpio = 2,
- .active_low = 1,
- },
- {
-- .name = "ppp",
-+ .name = "96348R:green:ppp",
- .gpio = 3,
- .active_low = 1,
- },
- {
-- .name = "ppp-fail",
-+ .name = "96348R:green:ppp-fail",
- .gpio = 4,
- .active_low = 1,
- },
- {
-- .name = "power",
-+ .name = "96348R:green:power",
- .gpio = 0,
- .active_low = 1,
- .default_trigger = "default-on",
-
- },
- {
-- .name = "stop",
-+ .name = "96348R:green:stop",
- .gpio = 1,
- .active_low = 1,
- },
-@@ -223,28 +223,28 @@ static struct board_info __initdata boar
-
- .leds = {
- {
-- .name = "adsl-fail",
-+ .name = "96348GW-10:green:adsl-fail",
- .gpio = 2,
- .active_low = 1,
- },
- {
-- .name = "ppp",
-+ .name = "96348GW-10:green:ppp",
- .gpio = 3,
- .active_low = 1,
- },
- {
-- .name = "ppp-fail",
-+ .name = "96348GW-10:green:ppp-fail",
- .gpio = 4,
- .active_low = 1,
- },
- {
-- .name = "power",
-+ .name = "96348GW-10:green:power",
- .gpio = 0,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
-- .name = "stop",
-+ .name = "96348GW-10:green:stop",
- .gpio = 1,
- .active_low = 1,
- },
-@@ -277,28 +277,28 @@ static struct board_info __initdata boar
-
- .leds = {
- {
-- .name = "adsl-fail",
-+ .name = "96348GW-11:green:adsl-fail",
- .gpio = 2,
- .active_low = 1,
- },
- {
-- .name = "ppp",
-+ .name = "96348GW-11:green:ppp",
- .gpio = 3,
- .active_low = 1,
- },
- {
-- .name = "ppp-fail",
-+ .name = "96348GW-11:green:ppp-fail",
- .gpio = 4,
- .active_low = 1,
- },
- {
-- .name = "power",
-+ .name = "96348GW-11:green:power",
- .gpio = 0,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
-- .name = "stop",
-+ .name = "96348GW-11:green:stop",
- .gpio = 1,
- .active_low = 1,
- },
-@@ -345,28 +345,28 @@ static struct board_info __initdata boar
-
- .leds = {
- {
-- .name = "adsl-fail",
-+ .name = "96348GW:green:adsl-fail",
- .gpio = 2,
- .active_low = 1,
- },
- {
-- .name = "ppp",
-+ .name = "96348GW:green:ppp",
- .gpio = 3,
- .active_low = 1,
- },
- {
-- .name = "ppp-fail",
-+ .name = "96348GW:green:ppp-fail",
- .gpio = 4,
- .active_low = 1,
- },
- {
-- .name = "power",
-+ .name = "96348GW:green:power",
- .gpio = 0,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
-- .name = "stop",
-+ .name = "96348GW:green:stop",
- .gpio = 1,
- .active_low = 1,
- },
-@@ -498,27 +498,27 @@ static struct board_info __initdata boar
-
- .leds = {
- {
-- .name = "adsl-fail",
-+ .name = "96358VW:green:adsl-fail",
- .gpio = 15,
- .active_low = 1,
- },
- {
-- .name = "ppp",
-+ .name = "96358VW:green:ppp",
- .gpio = 22,
- .active_low = 1,
- },
- {
-- .name = "ppp-fail",
-+ .name = "96358VW:green:ppp-fail",
- .gpio = 23,
- .active_low = 1,
- },
- {
-- .name = "power",
-+ .name = "96358VW:green:power",
- .gpio = 4,
- .default_trigger = "default-on",
- },
- {
-- .name = "stop",
-+ .name = "96358VW:green:stop",
- .gpio = 5,
- },
- },
-@@ -550,22 +550,22 @@ static struct board_info __initdata boar
-
- .leds = {
- {
-- .name = "adsl",
-+ .name = "96358VW2:green:adsl",
- .gpio = 22,
- .active_low = 1,
- },
- {
-- .name = "ppp-fail",
-+ .name = "96358VW2:green:ppp-fail",
- .gpio = 23,
- },
- {
-- .name = "power",
-+ .name = "96358VW2:green:power",
- .gpio = 5,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
-- .name = "stop",
-+ .name = "96358VW2:green:stop",
- .gpio = 4,
- .active_low = 1,
- },
diff --git a/target/linux/brcm63xx/patches-3.3/311-cfe_version_mod.patch b/target/linux/brcm63xx/patches-3.3/311-cfe_version_mod.patch
deleted file mode 100644
index 1269bc0c47..0000000000
--- a/target/linux/brcm63xx/patches-3.3/311-cfe_version_mod.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -777,6 +777,8 @@ void __init board_prom_init(void)
- if (!memcmp(cfe, "cfe-v", 5))
- snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
- cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
-+ else if (!memcmp(cfe, "cfe-", 4))
-+ snprintf(cfe_version, 16, "%s", (char *) &cfe[4]);
- else
- strcpy(cfe_version, "unknown");
- printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -54,10 +54,10 @@ static int bcm63xx_detect_cfe(struct mtd
- if (ret)
- return ret;
-
-- if (strncmp("cfe-v", buf, 5) == 0)
-+ if (strncmp("cfe-", buf, 4) == 0)
- return 0;
-
-- /* very old CFE's do not have the cfe-v string, so check for magic */
-+ /* very old CFE's do not have the cfe- string, so check for magic */
- ret = mtd_read(master, BCM63XX_CFE_MAGIC_OFFSET, 8, &retlen,
- (void *)buf);
- buf[retlen] = 0;
diff --git a/target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6362-support.patch b/target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6362-support.patch
deleted file mode 100644
index 5b6ecbed4b..0000000000
--- a/target/linux/brcm63xx/patches-3.3/312-MIPS-BCM63XX-add-basic-BCM6362-support.patch
+++ /dev/null
@@ -1,497 +0,0 @@
-From 27ebbb819b1f92d52309276b29b7a56e362e5c4d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 21 Nov 2011 00:48:52 +0100
-Subject: [PATCH 54/84] MIPS: BCM63XX: add basic BCM6362 support
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/Kconfig | 4 +
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +-
- arch/mips/bcm63xx/cpu.c | 52 ++++++++-
- arch/mips/bcm63xx/irq.c | 19 +++
- arch/mips/bcm63xx/prom.c | 2 +
- arch/mips/bcm63xx/setup.c | 3 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 139 +++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h | 2 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 59 +++++++++
- arch/mips/include/asm/mach-bcm63xx/ioremap.h | 1 +
- 10 files changed, 281 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -25,6 +25,10 @@ config BCM63XX_CPU_6358
- bool "support 6358 CPU"
- select HW_HAS_PCI
-
-+config BCM63XX_CPU_6362
-+ bool "support 6362 CPU"
-+ select HW_HAS_PCI
-+
- config BCM63XX_CPU_6368
- bool "support 6368 CPU"
- select HW_HAS_PCI
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -764,7 +764,7 @@ void __init board_prom_init(void)
- /* read base address of boot chip select (0)
- * 6328 does not have MPI but boots from a fixed address
- */
-- if (BCMCPU_IS_6328())
-+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
- val = 0x18000000;
- else {
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
---- a/arch/mips/bcm63xx/cpu.c
-+++ b/arch/mips/bcm63xx/cpu.c
-@@ -71,6 +71,15 @@ static const int bcm6358_irqs[] = {
-
- };
-
-+static const unsigned long bcm6362_regs_base[] = {
-+ __GEN_CPU_REGS_TABLE(6362)
-+};
-+
-+static const int bcm6362_irqs[] = {
-+ __GEN_CPU_IRQ_TABLE(6362)
-+
-+};
-+
- static const unsigned long bcm6368_regs_base[] = {
- __GEN_CPU_REGS_TABLE(6368)
- };
-@@ -169,6 +178,42 @@ static unsigned int detect_cpu_clock(voi
- return (16 * 1000000 * n1 * n2) / m1;
- }
-
-+ case BCM6362_CPU_ID:
-+ {
-+ unsigned int tmp, mips_pll_fcvo;
-+
-+ tmp = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
-+ mips_pll_fcvo = (tmp & STRAPBUS_6362_FCVO_MASK)
-+ >> STRAPBUS_6362_FCVO_SHIFT;
-+ switch (mips_pll_fcvo) {
-+ case 0x03:
-+ case 0x0b:
-+ case 0x13:
-+ case 0x1b:
-+ return 240000000;
-+ case 0x04:
-+ case 0x0c:
-+ case 0x14:
-+ case 0x1c:
-+ return 160000000;
-+ case 0x05:
-+ case 0x0e:
-+ case 0x16:
-+ case 0x1e:
-+ case 0x1f:
-+ return 400000000;
-+ case 0x06:
-+ return 440000000;
-+ case 0x07:
-+ case 0x17:
-+ return 384000000;
-+ case 0x15:
-+ case 0x1d:
-+ return 200000000;
-+ default:
-+ return 320000000;
-+ }
-+ }
- case BCM6368_CPU_ID:
- {
- unsigned int tmp, p1, p2, ndiv, m1;
-@@ -205,7 +250,7 @@ static unsigned int detect_memory_size(v
- unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0;
- u32 val;
-
-- if (BCMCPU_IS_6328())
-+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
- return bcm_ddr_readl(DDR_CSEND_REG) << 24;
-
- if (BCMCPU_IS_6345()) {
-@@ -280,6 +325,11 @@ void __init bcm63xx_cpu_init(void)
- bcm63xx_regs_base = bcm6328_regs_base;
- bcm63xx_irqs = bcm6328_irqs;
- break;
-+ case BCM6362_CPU_ID:
-+ expected_cpu_id = BCM6362_CPU_ID;
-+ bcm63xx_regs_base = bcm6362_regs_base;
-+ bcm63xx_irqs = bcm6362_irqs;
-+ break;
- case BCM6368_CPU_ID:
- expected_cpu_id = BCM6368_CPU_ID;
- bcm63xx_regs_base = bcm6368_regs_base;
---- a/arch/mips/bcm63xx/irq.c
-+++ b/arch/mips/bcm63xx/irq.c
-@@ -82,6 +82,14 @@ static void __internal_irq_unmask_64(uns
- #define ext_irq_cfg_reg1 PERF_EXTIRQ_CFG_REG_6358
- #define ext_irq_cfg_reg2 0
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+#define irq_stat_reg PERF_IRQSTAT_6362_REG
-+#define irq_mask_reg PERF_IRQMASK_6362_REG
-+#define irq_bits 64
-+#define is_ext_irq_cascaded 1
-+#define ext_irq_start (BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE)
-+#define ext_irq_end (BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE)
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- #define irq_stat_reg PERF_IRQSTAT_6368_REG
- #define irq_mask_reg PERF_IRQMASK_6368_REG
-@@ -170,6 +178,16 @@ static void bcm63xx_init_irq(void)
- ext_irq_end = BCM_6358_EXT_IRQ3 - IRQ_INTERNAL_BASE;
- ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6358;
- break;
-+ case BCM6362_CPU_ID:
-+ irq_stat_addr += PERF_IRQSTAT_6362_REG;
-+ irq_mask_addr += PERF_IRQMASK_6362_REG;
-+ irq_bits = 64;
-+ ext_irq_count = 4;
-+ is_ext_irq_cascaded = 1;
-+ ext_irq_start = BCM_6362_EXT_IRQ0 - IRQ_INTERNAL_BASE;
-+ ext_irq_end = BCM_6362_EXT_IRQ3 - IRQ_INTERNAL_BASE;
-+ ext_irq_cfg_reg1 = PERF_EXTIRQ_CFG_REG_6362;
-+ break;
- case BCM6368_CPU_ID:
- irq_stat_addr += PERF_IRQSTAT_6368_REG;
- irq_mask_addr += PERF_IRQMASK_6368_REG;
-@@ -457,6 +475,7 @@ static int bcm63xx_external_irq_set_type
- case BCM6338_CPU_ID:
- case BCM6345_CPU_ID:
- case BCM6358_CPU_ID:
-+ case BCM6362_CPU_ID:
- case BCM6368_CPU_ID:
- if (levelsense)
- reg |= EXTIRQ_CFG_LEVELSENSE(irq);
---- a/arch/mips/bcm63xx/prom.c
-+++ b/arch/mips/bcm63xx/prom.c
-@@ -36,6 +36,8 @@ void __init prom_init(void)
- mask = CKCTL_6348_ALL_SAFE_EN;
- else if (BCMCPU_IS_6358())
- mask = CKCTL_6358_ALL_SAFE_EN;
-+ else if (BCMCPU_IS_6362())
-+ mask = CKCTL_6362_ALL_SAFE_EN;
- else if (BCMCPU_IS_6368())
- mask = CKCTL_6368_ALL_SAFE_EN;
- else
---- a/arch/mips/bcm63xx/setup.c
-+++ b/arch/mips/bcm63xx/setup.c
-@@ -83,6 +83,9 @@ void bcm63xx_machine_reboot(void)
- case BCM6358_CPU_ID:
- perf_regs[0] = PERF_EXTIRQ_CFG_REG_6358;
- break;
-+ case BCM6362_CPU_ID:
-+ perf_regs[0] = PERF_EXTIRQ_CFG_REG_6362;
-+ break;
- }
-
- for (i = 0; i < 2; i++) {
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -14,6 +14,7 @@
- #define BCM6345_CPU_ID 0x6345
- #define BCM6348_CPU_ID 0x6348
- #define BCM6358_CPU_ID 0x6358
-+#define BCM6362_CPU_ID 0x6362
- #define BCM6368_CPU_ID 0x6368
-
- void __init bcm63xx_cpu_init(void);
-@@ -86,6 +87,20 @@ unsigned int bcm63xx_get_cpu_freq(void);
- # define BCMCPU_IS_6358() (0)
- #endif
-
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+# ifdef bcm63xx_get_cpu_id
-+# undef bcm63xx_get_cpu_id
-+# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id()
-+# define BCMCPU_RUNTIME_DETECT
-+# else
-+# define bcm63xx_get_cpu_id() BCM6362_CPU_ID
-+# endif
-+# define BCMCPU_IS_6362() (bcm63xx_get_cpu_id() == BCM6362_CPU_ID)
-+#else
-+# define BCMCPU_IS_6362() (0)
-+#endif
-+
-+
- #ifdef CONFIG_BCM63XX_CPU_6368
- # ifdef bcm63xx_get_cpu_id
- # undef bcm63xx_get_cpu_id
-@@ -402,6 +417,62 @@ enum bcm63xx_regs_set {
-
-
- /*
-+ * 6362 register sets base address
-+ */
-+#define BCM_6362_DSL_LMEM_BASE (0xdeadbeef)
-+#define BCM_6362_PERF_BASE (0xb0000000)
-+#define BCM_6362_TIMER_BASE (0xb0000040)
-+#define BCM_6362_WDT_BASE (0xb000005c)
-+#define BCM_6362_UART0_BASE (0xb0000100)
-+#define BCM_6362_UART1_BASE (0xb0000120)
-+#define BCM_6362_GPIO_BASE (0xb0000080)
-+#define BCM_6362_SPI_BASE (0xb0000800)
-+#define BCM_6362_HSSPI_BASE (0xb0001000)
-+#define BCM_6362_UDC0_BASE (0xdeadbeef)
-+#define BCM_6362_USBDMA_BASE (0xb000c000)
-+#define BCM_6362_OHCI0_BASE (0xb0002600)
-+#define BCM_6362_OHCI_PRIV_BASE (0xdeadbeef)
-+#define BCM_6362_USBH_PRIV_BASE (0xb0002700)
-+#define BCM_6362_USBD_BASE (0xb0002400)
-+#define BCM_6362_MPI_BASE (0xdeadbeef)
-+#define BCM_6362_PCMCIA_BASE (0xdeadbeef)
-+#define BCM_6362_PCIE_BASE (0xb0e40000)
-+#define BCM_6362_SDRAM_REGS_BASE (0xdeadbeef)
-+#define BCM_6362_DSL_BASE (0xdeadbeef)
-+#define BCM_6362_UBUS_BASE (0xdeadbeef)
-+#define BCM_6362_ENET0_BASE (0xdeadbeef)
-+#define BCM_6362_ENET1_BASE (0xdeadbeef)
-+#define BCM_6362_ENETDMA_BASE (0xb000d800)
-+#define BCM_6362_ENETDMAC_BASE (0xb000da00)
-+#define BCM_6362_ENETDMAS_BASE (0xb000dc00)
-+#define BCM_6362_ENETSW_BASE (0xb0e00000)
-+#define BCM_6362_EHCI0_BASE (0xb0002500)
-+#define BCM_6362_SDRAM_BASE (0xdeadbeef)
-+#define BCM_6362_MEMC_BASE (0xdeadbeef)
-+#define BCM_6362_DDR_BASE (0xb0003000)
-+#define BCM_6362_M2M_BASE (0xdeadbeef)
-+#define BCM_6362_ATM_BASE (0xdeadbeef)
-+#define BCM_6362_XTM_BASE (0xb0007800)
-+#define BCM_6362_XTMDMA_BASE (0xb000b800)
-+#define BCM_6362_XTMDMAC_BASE (0xdeadbeef)
-+#define BCM_6362_XTMDMAS_BASE (0xdeadbeef)
-+#define BCM_6362_PCM_BASE (0xb000a800)
-+#define BCM_6362_PCMDMA_BASE (0xdeadbeef)
-+#define BCM_6362_PCMDMAC_BASE (0xdeadbeef)
-+#define BCM_6362_PCMDMAS_BASE (0xdeadbeef)
-+#define BCM_6362_RNG_BASE (0xdeadbeef)
-+#define BCM_6362_MISC_BASE (0xb0001800)
-+
-+#define BCM_6362_NAND_REG_BASE (0xb0000200)
-+#define BCM_6362_NAND_CACHE_BASE (0xb0000600)
-+#define BCM_6362_LED_BASE (0xb0001900)
-+#define BCM_6362_IPSEC_BASE (0xb0002800)
-+#define BCM_6362_IPSEC_DMA_BASE (0xb000d000)
-+#define BCM_6362_WLAN_CHIPCOMMON_BASE (0xb0004000)
-+#define BCM_6362_WLAN_D11_BASE (0xb0005000)
-+#define BCM_6362_WLAN_SHIM_BASE (0xb0007000)
-+
-+/*
- * 6368 register sets base address
- */
- #define BCM_6368_DSL_LMEM_BASE (0xdeadbeef)
-@@ -557,6 +628,9 @@ static inline unsigned long bcm63xx_regs
- #ifdef CONFIG_BCM63XX_CPU_6358
- __GEN_RSET(6358)
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+ __GEN_RSET(6362)
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- __GEN_RSET(6368)
- #endif
-@@ -777,6 +851,71 @@ enum bcm63xx_irq {
- #define BCM_6358_EXT_IRQ3 (IRQ_INTERNAL_BASE + 28)
-
- /*
-+ * 6362 irqs
-+ */
-+#define BCM_6362_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32)
-+
-+#define BCM_6362_TIMER_IRQ (IRQ_INTERNAL_BASE + 0)
-+#define BCM_6362_SPI_IRQ (IRQ_INTERNAL_BASE + 2)
-+#define BCM_6362_UART0_IRQ (IRQ_INTERNAL_BASE + 3)
-+#define BCM_6362_UART1_IRQ (IRQ_INTERNAL_BASE + 4)
-+#define BCM_6362_DSL_IRQ (IRQ_INTERNAL_BASE + 28)
-+#define BCM_6362_UDC0_IRQ 0
-+#define BCM_6362_ENET0_IRQ 0
-+#define BCM_6362_ENET1_IRQ 0
-+#define BCM_6362_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 14)
-+#define BCM_6362_HSSPI_IRQ (IRQ_INTERNAL_BASE + 5)
-+#define BCM_6362_OHCI0_IRQ (IRQ_INTERNAL_BASE + 9)
-+#define BCM_6362_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10)
-+#define BCM_6362_USBD_IRQ (IRQ_INTERNAL_BASE + 11)
-+#define BCM_6362_USBD_RXDMA0_IRQ (IRQ_INTERNAL_BASE + 20)
-+#define BCM_6362_USBD_TXDMA0_IRQ (IRQ_INTERNAL_BASE + 21)
-+#define BCM_6362_USBD_RXDMA1_IRQ (IRQ_INTERNAL_BASE + 22)
-+#define BCM_6362_USBD_TXDMA1_IRQ (IRQ_INTERNAL_BASE + 23)
-+#define BCM_6362_USBD_RXDMA2_IRQ (IRQ_INTERNAL_BASE + 24)
-+#define BCM_6362_USBD_TXDMA2_IRQ (IRQ_INTERNAL_BASE + 25)
-+#define BCM_6362_PCMCIA_IRQ 0
-+#define BCM_6362_ENET0_RXDMA_IRQ 0
-+#define BCM_6362_ENET0_TXDMA_IRQ 0
-+#define BCM_6362_ENET1_RXDMA_IRQ 0
-+#define BCM_6362_ENET1_TXDMA_IRQ 0
-+#define BCM_6362_PCI_IRQ (IRQ_INTERNAL_BASE + 30)
-+#define BCM_6362_ATM_IRQ 0
-+#define BCM_6362_ENETSW_RXDMA0_IRQ (BCM_6362_HIGH_IRQ_BASE + 0)
-+#define BCM_6362_ENETSW_RXDMA1_IRQ (BCM_6362_HIGH_IRQ_BASE + 1)
-+#define BCM_6362_ENETSW_RXDMA2_IRQ (BCM_6362_HIGH_IRQ_BASE + 2)
-+#define BCM_6362_ENETSW_RXDMA3_IRQ (BCM_6362_HIGH_IRQ_BASE + 3)
-+#define BCM_6362_ENETSW_TXDMA0_IRQ 0
-+#define BCM_6362_ENETSW_TXDMA1_IRQ 0
-+#define BCM_6362_ENETSW_TXDMA2_IRQ 0
-+#define BCM_6362_ENETSW_TXDMA3_IRQ 0
-+#define BCM_6362_XTM_IRQ 0
-+#define BCM_6362_XTM_DMA0_IRQ (BCM_6362_HIGH_IRQ_BASE + 12)
-+
-+#define BCM_6362_RING_OSC_IRQ (IRQ_INTERNAL_BASE + 1)
-+#define BCM_6362_WLAN_GPIO_IRQ (IRQ_INTERNAL_BASE + 6)
-+#define BCM_6362_WLAN_IRQ (IRQ_INTERNAL_BASE + 7)
-+#define BCM_6362_IPSEC_IRQ (IRQ_INTERNAL_BASE + 8)
-+#define BCM_6362_NAND_IRQ (IRQ_INTERNAL_BASE + 12)
-+#define BCM_6362_PCM_IRQ (IRQ_INTERNAL_BASE + 13)
-+#define BCM_6362_DG_IRQ (IRQ_INTERNAL_BASE + 15)
-+#define BCM_6362_EPHY_ENERGY0_IRQ (IRQ_INTERNAL_BASE + 16)
-+#define BCM_6362_EPHY_ENERGY1_IRQ (IRQ_INTERNAL_BASE + 17)
-+#define BCM_6362_EPHY_ENERGY2_IRQ (IRQ_INTERNAL_BASE + 18)
-+#define BCM_6362_EPHY_ENERGY3_IRQ (IRQ_INTERNAL_BASE + 19)
-+#define BCM_6362_IPSEC_DMA0_IRQ (IRQ_INTERNAL_BASE + 26)
-+#define BCM_6362_IPSEC_DMA1_IRQ (IRQ_INTERNAL_BASE + 27)
-+#define BCM_6362_FAP0_IRQ (IRQ_INTERNAL_BASE + 29)
-+#define BCM_6362_PCM_DMA0_IRQ (BCM_6362_HIGH_IRQ_BASE + 4)
-+#define BCM_6362_PCM_DMA1_IRQ (BCM_6362_HIGH_IRQ_BASE + 5)
-+#define BCM_6362_DECT0_IRQ (BCM_6362_HIGH_IRQ_BASE + 6)
-+#define BCM_6362_DECT1_IRQ (BCM_6362_HIGH_IRQ_BASE + 7)
-+#define BCM_6362_EXT_IRQ0 (BCM_6362_HIGH_IRQ_BASE + 8)
-+#define BCM_6362_EXT_IRQ1 (BCM_6362_HIGH_IRQ_BASE + 9)
-+#define BCM_6362_EXT_IRQ2 (BCM_6362_HIGH_IRQ_BASE + 10)
-+#define BCM_6362_EXT_IRQ3 (BCM_6362_HIGH_IRQ_BASE + 11)
-+
-+/*
- * 6368 irqs
- */
- #define BCM_6368_HIGH_IRQ_BASE (IRQ_INTERNAL_BASE + 32)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h
-@@ -17,6 +17,8 @@ static inline unsigned long bcm63xx_gpio
- return 8;
- case BCM6345_CPU_ID:
- return 16;
-+ case BCM6362_CPU_ID:
-+ return 48;
- case BCM6368_CPU_ID:
- return 38;
- case BCM6348_CPU_ID:
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -107,6 +107,39 @@
- CKCTL_6358_USBSU_EN | \
- CKCTL_6358_EPHY_EN)
-
-+#define CKCTL_6362_ADSL_QPROC_EN (1 << 1)
-+#define CKCTL_6362_ADSL_AFE_EN (1 << 2)
-+#define CKCTL_6362_ADSL_EN (1 << 3)
-+#define CKCTL_6362_MIPS_EN (1 << 4)
-+#define CKCTL_6362_WLAN_OCP_EN (1 << 5)
-+#define CKCTL_6362_SWPKT_USB_EN (1 << 7)
-+#define CKCTL_6362_SWPKT_SAR_EN (1 << 8)
-+#define CKCTL_6362_SAR_EN (1 << 9)
-+#define CKCTL_6362_ROBOSW_EN (1 << 10)
-+#define CKCTL_6362_PCM_EN (1 << 11)
-+#define CKCTL_6362_USBD_EN (1 << 12)
-+#define CKCTL_6362_USBH_EN (1 << 13)
-+#define CKCTL_6362_IPSEC_EN (1 << 14)
-+#define CKCTL_6362_SPI_EN (1 << 15)
-+#define CKCTL_6362_HSSPI_EN (1 << 16)
-+#define CKCTL_6362_PCIE_EN (1 << 17)
-+#define CKCTL_6362_FAP_EN (1 << 18)
-+#define CKCTL_6362_PHYMIPS_EN (1 << 19)
-+#define CKCTL_6362_NAND_EN (1 << 20)
-+
-+#define CKCTL_6362_ALL_SAFE_EN (CKCTL_6362_PHYMIPS_EN | \
-+ CKCTL_6362_ADSL_QPROC_EN | \
-+ CKCTL_6362_ADSL_AFE_EN | \
-+ CKCTL_6362_ADSL_EN | \
-+ CKCTL_6362_SAR_EN | \
-+ CKCTL_6362_PCM_EN | \
-+ CKCTL_6362_IPSEC_EN | \
-+ CKCTL_6362_USBD_EN | \
-+ CKCTL_6362_USBH_EN | \
-+ CKCTL_6362_ROBOSW_EN | \
-+ CKCTL_6362_PCIE_EN)
-+
-+
- #define CKCTL_6368_VDSL_QPROC_EN (1 << 2)
- #define CKCTL_6368_VDSL_AFE_EN (1 << 3)
- #define CKCTL_6368_VDSL_BONDING_EN (1 << 4)
-@@ -148,6 +181,7 @@
- #define PERF_IRQMASK_6345_REG 0xc
- #define PERF_IRQMASK_6348_REG 0xc
- #define PERF_IRQMASK_6358_REG 0xc
-+#define PERF_IRQMASK_6362_REG 0x20
- #define PERF_IRQMASK_6368_REG 0x20
-
- /* Interrupt Status register */
-@@ -156,6 +190,7 @@
- #define PERF_IRQSTAT_6345_REG 0x10
- #define PERF_IRQSTAT_6348_REG 0x10
- #define PERF_IRQSTAT_6358_REG 0x10
-+#define PERF_IRQSTAT_6362_REG 0x28
- #define PERF_IRQSTAT_6368_REG 0x28
-
- /* External Interrupt Configuration register */
-@@ -164,6 +199,7 @@
- #define PERF_EXTIRQ_CFG_REG_6345 0x14
- #define PERF_EXTIRQ_CFG_REG_6348 0x14
- #define PERF_EXTIRQ_CFG_REG_6358 0x14
-+#define PERF_EXTIRQ_CFG_REG_6362 0x18
- #define PERF_EXTIRQ_CFG_REG_6368 0x18
-
- #define PERF_EXTIRQ_CFG_REG2_6368 0x1c
-@@ -191,6 +227,7 @@
- /* Soft Reset register */
- #define PERF_SOFTRESET_REG 0x28
- #define PERF_SOFTRESET_6328_REG 0x10
-+#define PERF_SOFTRESET_6362_REG 0x10
- #define PERF_SOFTRESET_6368_REG 0x10
-
- #define SOFTRESET_6328_SPI_MASK (1 << 0)
-@@ -244,6 +281,22 @@
- SOFTRESET_6348_ACLC_MASK | \
- SOFTRESET_6348_ADSLMIPSPLL_MASK)
-
-+#define SOFTRESET_6362_SPI_MASK (1 << 0)
-+#define SOFTRESET_6362_IPSEC_MASK (1 << 1)
-+#define SOFTRESET_6362_EPHY_MASK (1 << 2)
-+#define SOFTRESET_6362_SAR_MASK (1 << 3)
-+#define SOFTRESET_6362_ENETSW_MASK (1 << 4)
-+#define SOFTRESET_6362_USBS_MASK (1 << 5)
-+#define SOFTRESET_6362_USBH_MASK (1 << 6)
-+#define SOFTRESET_6362_PCM_MASK (1 << 7)
-+#define SOFTRESET_6362_PCIE_CORE_MASK (1 << 8)
-+#define SOFTRESET_6362_PCIE_MASK (1 << 9)
-+#define SOFTRESET_6362_PCIE_EXT_MASK (1 << 10)
-+#define SOFTRESET_6362_WLAN_SHIM_MASK (1 << 11)
-+#define SOFTRESET_6362_DDR_PHY_MASK (1 << 12)
-+#define SOFTRESET_6362_FAP_MASK (1 << 13)
-+#define SOFTRESET_6362_WLAN_UBUS_MASK (1 << 14)
-+
- #define SOFTRESET_6368_SPI_MASK (1 << 0)
- #define SOFTRESET_6368_MPI_MASK (1 << 3)
- #define SOFTRESET_6368_EPHY_MASK (1 << 6)
-@@ -1182,6 +1235,12 @@
- #define SERDES_PCIE_EN (1 << 0)
- #define SERDES_PCIE_EXD_EN (1 << 15)
-
-+#define MISC_STRAPBUS_6362_REG 0x14
-+#define STRAPBUS_6362_FCVO_SHIFT 1
-+#define STRAPBUS_6362_FCVO_MASK (0x1f << STRAPBUS_6362_FCVO_SHIFT)
-+#define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
-+#define STRAPBUS_6362_BOOT_SEL_NAND (0 << 15)
-+
- #define MISC_STRAPBUS_6328_REG 0x240
- #define STRAPBUS_6328_FCVO_SHIFT 7
- #define STRAPBUS_6328_FCVO_MASK (0x1f << STRAPBUS_6328_FCVO_SHIFT)
---- a/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/ioremap.h
-@@ -19,6 +19,7 @@ static inline int is_bcm63xx_internal_re
- return 1;
- break;
- case BCM6328_CPU_ID:
-+ case BCM6362_CPU_ID:
- case BCM6368_CPU_ID:
- if (offset >= 0xb0000000 && offset < 0xb1000000)
- return 1;
diff --git a/target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch
deleted file mode 100644
index 36024d10b4..0000000000
--- a/target/linux/brcm63xx/patches-3.3/313-MIPS-BCM63XX-enable-pcie-for-BCM6362.patch
+++ /dev/null
@@ -1,110 +0,0 @@
-From e49546bf3f255f028d0877ceeb7ed6466fe37d8a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 21 Nov 2011 00:53:26 +0100
-Subject: [PATCH 56/84] MIPS: BCM63XX: enable pcie for BCM6362
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 3 +-
- arch/mips/pci/pci-bcm63xx.c | 57 +++++++++++++++------
- 2 files changed, 44 insertions(+), 16 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1231,7 +1231,8 @@
- /*************************************************************************
- * _REG relative to RSET_MISC
- *************************************************************************/
--#define MISC_SERDES_CTRL_REG 0x0
-+#define MISC_SERDES_CTRL_6328_REG 0x0
-+#define MISC_SERDES_CTRL_6362_REG 0x4
- #define SERDES_PCIE_EN (1 << 0)
- #define SERDES_PCIE_EXD_EN (1 << 15)
-
---- a/arch/mips/pci/pci-bcm63xx.c
-+++ b/arch/mips/pci/pci-bcm63xx.c
-@@ -118,35 +118,61 @@ void __iomem *pci_iospace_start;
- static void __init bcm63xx_reset_pcie(void)
- {
- u32 val;
-+ u32 reg;
-+ u32 mask;
-
- /* enable clock */
-+
-+ if (BCMCPU_IS_6328())
-+ mask = CKCTL_6328_PCIE_EN;
-+ else
-+ mask = CKCTL_6362_PCIE_EN;
-+
- val = bcm_perf_readl(PERF_CKCTL_REG);
-- val |= CKCTL_6328_PCIE_EN;
-+ val |= mask;
- bcm_perf_writel(val, PERF_CKCTL_REG);
-
- /* enable SERDES */
-- val = bcm_misc_readl(MISC_SERDES_CTRL_REG);
-+
-+ if (BCMCPU_IS_6328())
-+ reg = MISC_SERDES_CTRL_6328_REG;
-+ else
-+ reg = MISC_SERDES_CTRL_6362_REG;
-+
-+ val = bcm_misc_readl(reg);
- val |= SERDES_PCIE_EN | SERDES_PCIE_EXD_EN;
-- bcm_misc_writel(val, MISC_SERDES_CTRL_REG);
-+ bcm_misc_writel(val, reg);
-
- /* reset the PCIe core */
-- val = bcm_perf_readl(PERF_SOFTRESET_6328_REG);
-+ if (BCMCPU_IS_6328()) {
-+ reg = PERF_SOFTRESET_6328_REG;
-+ mask = SOFTRESET_6328_PCIE_MASK | SOFTRESET_6328_PCIE_CORE_MASK
-+ | SOFTRESET_6328_PCIE_HARD_MASK;
-+ } else {
-+ reg = PERF_SOFTRESET_6362_REG;
-+ mask = SOFTRESET_6362_PCIE_MASK | SOFTRESET_6362_PCIE_CORE_MASK;
-+ }
-+ val = bcm_perf_readl(reg);
-+ val &= ~mask;
-+
-+ if (BCMCPU_IS_6328())
-+ val &= ~SOFTRESET_6328_PCIE_EXT_MASK;
-+ else
-+ val &= ~SOFTRESET_6362_PCIE_EXT_MASK;
-
-- val &= ~SOFTRESET_6328_PCIE_MASK;
-- val &= ~SOFTRESET_6328_PCIE_CORE_MASK;
-- val &= ~SOFTRESET_6328_PCIE_HARD_MASK;
-- val &= ~SOFTRESET_6328_PCIE_EXT_MASK;
-- bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
-+ bcm_perf_writel(val, reg);
- mdelay(10);
-
-- val |= SOFTRESET_6328_PCIE_MASK;
-- val |= SOFTRESET_6328_PCIE_CORE_MASK;
-- val |= SOFTRESET_6328_PCIE_HARD_MASK;
-- bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
-+ val |= mask;
-+ bcm_perf_writel(val, reg);
- mdelay(10);
-
-- val |= SOFTRESET_6328_PCIE_EXT_MASK;
-- bcm_perf_writel(val, PERF_SOFTRESET_6328_REG);
-+ if (BCMCPU_IS_6328())
-+ val |= SOFTRESET_6328_PCIE_EXT_MASK;
-+ else
-+ val |= SOFTRESET_6362_PCIE_EXT_MASK;
-+
-+ bcm_perf_writel(val, reg);
- mdelay(200);
- }
-
-@@ -332,6 +358,7 @@ static int __init bcm63xx_pci_init(void)
-
- switch (bcm63xx_get_cpu_id()) {
- case BCM6328_CPU_ID:
-+ case BCM6362_CPU_ID:
- return bcm63xx_register_pcie();
- case BCM6348_CPU_ID:
- case BCM6358_CPU_ID:
diff --git a/target/linux/brcm63xx/patches-3.3/400-ohci-add-driver-for-bcm63xx-integrated-controller.patch b/target/linux/brcm63xx/patches-3.3/400-ohci-add-driver-for-bcm63xx-integrated-controller.patch
deleted file mode 100644
index debbb13cd8..0000000000
--- a/target/linux/brcm63xx/patches-3.3/400-ohci-add-driver-for-bcm63xx-integrated-controller.patch
+++ /dev/null
@@ -1,234 +0,0 @@
-From 7b510c5754d3c46e1287803f51e8ecb177414438 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Fri, 10 Jun 2011 19:14:30 +0200
-Subject: [PATCH 23/63] ohci: add driver for bcm63xx integrated controller.
-
----
- drivers/usb/host/Kconfig | 9 ++
- drivers/usb/host/ohci-bcm63xx.c | 175 +++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ohci-hcd.c | 5 +
- drivers/usb/host/ohci.h | 2 +-
- 4 files changed, 190 insertions(+), 1 deletions(-)
- create mode 100644 drivers/usb/host/ohci-bcm63xx.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -296,6 +296,15 @@ config USB_OHCI_HCD
- To compile this driver as a module, choose M here: the
- module will be called ohci-hcd.
-
-+config USB_OHCI_BCM63XX
-+ bool "Support for Broadcom 63xx on-chip OHCI USB controller"
-+ depends on USB_OHCI_HCD && BCM63XX
-+ select USB_OHCI_BIG_ENDIAN_DESC
-+ select USB_OHCI_BIG_ENDIAN_MMIO
-+ ---help---
-+ Enables support for the on-chip OHCI controller on
-+ BCM63XX chips.
-+
- config USB_OHCI_HCD_OMAP1
- bool "OHCI support for OMAP1/2 chips"
- depends on USB_OHCI_HCD && (ARCH_OMAP1 || ARCH_OMAP2)
---- /dev/null
-+++ b/drivers/usb/host/ohci-bcm63xx.c
-@@ -0,0 +1,175 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+
-+static struct clk *usb_host_clock;
-+
-+static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd)
-+{
-+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
-+ int ret;
-+
-+ ohci->num_ports = 1;
-+
-+ ret = ohci_init(ohci);
-+ if (ret < 0)
-+ return ret;
-+
-+ /* FIXME: autodetected port 2 is shared with USB slave */
-+
-+ ret = ohci_run(ohci);
-+ if (ret < 0) {
-+ err("can't start %s", hcd->self.bus_name);
-+ ohci_stop(hcd);
-+ return ret;
-+ }
-+ return 0;
-+}
-+
-+static const struct hc_driver ohci_bcm63xx_hc_driver = {
-+ .description = hcd_name,
-+ .product_desc = "BCM63XX integrated OHCI controller",
-+ .hcd_priv_size = sizeof(struct ohci_hcd),
-+
-+ .irq = ohci_irq,
-+ .flags = HCD_USB11 | HCD_MEMORY,
-+ .start = ohci_bcm63xx_start,
-+ .stop = ohci_stop,
-+ .shutdown = ohci_shutdown,
-+ .urb_enqueue = ohci_urb_enqueue,
-+ .urb_dequeue = ohci_urb_dequeue,
-+ .endpoint_disable = ohci_endpoint_disable,
-+ .get_frame_number = ohci_get_frame,
-+ .hub_status_data = ohci_hub_status_data,
-+ .hub_control = ohci_hub_control,
-+ .start_port_reset = ohci_start_port_reset,
-+};
-+
-+static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
-+{
-+ struct resource *res_mem;
-+ struct usb_hcd *hcd;
-+ struct ohci_hcd *ohci;
-+ struct clk *clk;
-+ u32 reg;
-+ int ret, irq;
-+
-+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ irq = platform_get_irq(pdev, 0);
-+ if (!res_mem || irq < 0)
-+ return -ENODEV;
-+
-+ /* enable USB host clock */
-+ clk = clk_get(&pdev->dev, "usbh");
-+ if (IS_ERR(clk))
-+ return -ENODEV;
-+
-+ clk_enable(clk);
-+ usb_host_clock = clk;
-+ msleep(100);
-+
-+ if (BCMCPU_IS_6348())
-+ bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
-+ else if (BCMCPU_IS_6358()) {
-+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+ /*
-+ * The magic value comes for the original vendor BSP
-+ * and is needed for USB to work. Datasheet does not
-+ * help, so the magic value is used as-is.
-+ */
-+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+ USBH_PRIV_TEST_6358_REG);
-+
-+ } else if (BCMCPU_IS_6368()) {
-+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
-+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
-+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+ reg |= USBH_PRIV_SETUP_IOC_MASK;
-+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+ }
-+
-+ hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
-+ if (!hcd)
-+ return -ENOMEM;
-+ hcd->rsrc_start = res_mem->start;
-+ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-+ pr_debug("request_mem_region failed\n");
-+ ret = -EBUSY;
-+ goto out;
-+ }
-+
-+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs) {
-+ pr_debug("ioremap failed\n");
-+ ret = -EIO;
-+ goto out1;
-+ }
-+
-+ ohci = hcd_to_ohci(hcd);
-+ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC |
-+ OHCI_QUIRK_FRAME_NO;
-+ ohci_hcd_init(ohci);
-+
-+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-+ if (ret)
-+ goto out2;
-+
-+ platform_set_drvdata(pdev, hcd);
-+ return 0;
-+
-+out2:
-+ iounmap(hcd->regs);
-+out1:
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+out:
-+ usb_put_hcd(hcd);
-+ return ret;
-+}
-+
-+static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd;
-+
-+ hcd = platform_get_drvdata(pdev);
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ usb_put_hcd(hcd);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ if (usb_host_clock) {
-+ clk_disable(usb_host_clock);
-+ clk_put(usb_host_clock);
-+ }
-+ platform_set_drvdata(pdev, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver ohci_hcd_bcm63xx_driver = {
-+ .probe = ohci_hcd_bcm63xx_drv_probe,
-+ .remove = __devexit_p(ohci_hcd_bcm63xx_drv_remove),
-+ .shutdown = usb_hcd_platform_shutdown,
-+ .driver = {
-+ .name = "bcm63xx_ohci",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+MODULE_ALIAS("platform:bcm63xx_ohci");
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1121,6 +1121,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ohci_xls_driver
- #endif
-
-+#ifdef CONFIG_USB_OHCI_BCM63XX
-+#include "ohci-bcm63xx.c"
-+#define PLATFORM_DRIVER ohci_hcd_bcm63xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(OMAP1_PLATFORM_DRIVER) && \
---- a/drivers/usb/host/ohci.h
-+++ b/drivers/usb/host/ohci.h
-@@ -652,7 +652,7 @@ static inline u32 hc32_to_cpup (const st
- * some big-endian SOC implementations. Same thing happens with PSW access.
- */
-
--#ifdef CONFIG_PPC_MPC52xx
-+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_BCM63XX)
- #define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO)
- #else
- #define big_endian_frame_no_quirk(ohci) 0
diff --git a/target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch b/target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch
deleted file mode 100644
index 8218fae44e..0000000000
--- a/target/linux/brcm63xx/patches-3.3/401-MIPS-BCM63XX-register-ohci-device.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-From ab96f20ca1c3c8e7e5acd82d1e50823a5d572675 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Tue, 24 May 2011 21:47:41 +0200
-Subject: [PATCH 24/63] MIPS: BCM63XX: register ohci device.
-
----
- arch/mips/bcm63xx/Kconfig | 9 ++--
- arch/mips/bcm63xx/Makefile | 2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++
- arch/mips/bcm63xx/dev-usb-ohci.c | 50 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h | 6 ++
- 5 files changed, 65 insertions(+), 6 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ohci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -8,22 +8,20 @@ config BCM63XX_CPU_6328
- config BCM63XX_CPU_6338
- bool "support 6338 CPU"
- select HW_HAS_PCI
-- select USB_ARCH_HAS_OHCI
-- select USB_OHCI_BIG_ENDIAN_DESC
-- select USB_OHCI_BIG_ENDIAN_MMIO
-+ select USB_ARCH_HAS_OHCI if USB_SUPPORT
-
- config BCM63XX_CPU_6345
- bool "support 6345 CPU"
-- select USB_OHCI_BIG_ENDIAN_DESC
-- select USB_OHCI_BIG_ENDIAN_MMIO
-
- config BCM63XX_CPU_6348
- bool "support 6348 CPU"
- select HW_HAS_PCI
-+ select USB_ARCH_HAS_OHCI if USB_SUPPORT
-
- config BCM63XX_CPU_6358
- bool "support 6358 CPU"
- select HW_HAS_PCI
-+ select USB_ARCH_HAS_OHCI if USB_SUPPORT
-
- config BCM63XX_CPU_6362
- bool "support 6362 CPU"
-@@ -32,6 +30,7 @@ config BCM63XX_CPU_6362
- config BCM63XX_CPU_6368
- bool "support 6368 CPU"
- select HW_HAS_PCI
-+ select USB_ARCH_HAS_OHCI if USB_SUPPORT
- endmenu
-
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- dev-dsp.o dev-enet.o dev-flash.o dev-pcmcia.o dev-rng.o \
-- dev-spi.o dev-uart.o dev-wdt.o
-+ dev-spi.o dev-uart.o dev-usb-ohci.o dev-wdt.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
- obj-y += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -27,6 +27,7 @@
- #include <bcm63xx_dev_flash.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
-+#include <bcm63xx_dev_usb_ohci.h>
- #include <board_bcm963xx.h>
- #include <linux/bcm963xx_tag.h>
-
-@@ -916,6 +917,9 @@ int __init board_register_devices(void)
- !board_get_mac_address(board.enet1.mac_addr))
- bcm63xx_enet_register(1, &board.enet1);
-
-+ if (board.has_ohci0)
-+ bcm63xx_ohci_register();
-+
- if (board.has_dsp)
- bcm63xx_dsp_register(&board.dsp);
-
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -0,0 +1,50 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+
-+static struct resource ohci_resources[] = {
-+ {
-+ .start = -1, /* filled at runtime */
-+ .end = -1, /* filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = -1, /* filled at runtime */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 ohci_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_ohci_device = {
-+ .name = "bcm63xx_ohci",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(ohci_resources),
-+ .resource = ohci_resources,
-+ .dev = {
-+ .dma_mask = &ohci_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+};
-+
-+int __init bcm63xx_ohci_register(void)
-+{
-+ if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358() && !BCMCPU_IS_6368())
-+ return 0;
-+
-+ ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
-+ ohci_resources[0].end = ohci_resources[0].start;
-+ ohci_resources[0].end += RSET_OHCI_SIZE - 1;
-+ ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0);
-+ return platform_device_register(&bcm63xx_ohci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ohci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_OHCI_H_
-+#define BCM63XX_DEV_USB_OHCI_H_
-+
-+int bcm63xx_ohci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_OHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/402-ehci-add-driver-for-bcm63xx-integrated-controller.patch b/target/linux/brcm63xx/patches-3.3/402-ehci-add-driver-for-bcm63xx-integrated-controller.patch
deleted file mode 100644
index 42c85e9913..0000000000
--- a/target/linux/brcm63xx/patches-3.3/402-ehci-add-driver-for-bcm63xx-integrated-controller.patch
+++ /dev/null
@@ -1,241 +0,0 @@
-From db58271d5152aa1d3894fdef13ca04379139d5d9 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Fri, 10 Jun 2011 19:15:47 +0200
-Subject: [PATCH 25/63] ehci: add driver for bcm63xx integrated controller.
-
----
- drivers/usb/host/Kconfig | 10 ++-
- drivers/usb/host/ehci-bcm63xx.c | 186 +++++++++++++++++++++++++++++++++++++++
- drivers/usb/host/ehci-hcd.c | 5 +
- 3 files changed, 199 insertions(+), 1 deletions(-)
- create mode 100644 drivers/usb/host/ehci-bcm63xx.c
-
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -106,7 +106,7 @@ config USB_EHCI_BIG_ENDIAN_MMIO
- depends on USB_EHCI_HCD && (PPC_CELLEB || PPC_PS3 || 440EPX || \
- ARCH_IXP4XX || XPS_USB_HCD_XILINX || \
- PPC_MPC512x || CPU_CAVIUM_OCTEON || \
-- PMC_MSP || SPARC_LEON)
-+ PMC_MSP || SPARC_LEON || BCM63XX)
- default y
-
- config USB_EHCI_BIG_ENDIAN_DESC
-@@ -129,6 +129,14 @@ config XPS_USB_HCD_XILINX
- config USB_FSL_MPH_DR_OF
- tristate
-
-+config USB_EHCI_BCM63XX
-+ bool "Support for Broadcom 63xx on-chip EHCI USB controller"
-+ depends on USB_EHCI_HCD && BCM63XX
-+ select USB_EHCI_BIG_ENDIAN_MMIO
-+ ---help---
-+ Enables support for the on-chip EHCI controller on
-+ BCM6358 and later chips.
-+
- config USB_EHCI_FSL
- bool "Support for Freescale PPC on-chip EHCI USB controller"
- depends on USB_EHCI_HCD && FSL_SOC
---- /dev/null
-+++ b/drivers/usb/host/ehci-bcm63xx.c
-@@ -0,0 +1,186 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/clk.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+
-+static struct clk *usb_host_clock;
-+
-+static int ehci_bcm63xx_setup(struct usb_hcd *hcd)
-+{
-+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-+ int retval;
-+
-+ retval = ehci_halt(ehci);
-+ if (retval)
-+ return retval;
-+
-+ retval = ehci_init(hcd);
-+ if (retval)
-+ return retval;
-+
-+ ehci_reset(ehci);
-+ ehci_port_power(ehci, 0);
-+
-+ return retval;
-+}
-+
-+
-+static const struct hc_driver ehci_bcm63xx_hc_driver = {
-+ .description = hcd_name,
-+ .product_desc = "BCM63XX integrated EHCI controller",
-+ .hcd_priv_size = sizeof(struct ehci_hcd),
-+
-+ .irq = ehci_irq,
-+ .flags = HCD_MEMORY | HCD_USB2,
-+
-+ .reset = ehci_bcm63xx_setup,
-+ .start = ehci_run,
-+ .stop = ehci_stop,
-+ .shutdown = ehci_shutdown,
-+
-+ .urb_enqueue = ehci_urb_enqueue,
-+ .urb_dequeue = ehci_urb_dequeue,
-+ .endpoint_disable = ehci_endpoint_disable,
-+
-+ .get_frame_number = ehci_get_frame,
-+
-+ .hub_status_data = ehci_hub_status_data,
-+ .hub_control = ehci_hub_control,
-+ .bus_suspend = ehci_bus_suspend,
-+ .bus_resume = ehci_bus_resume,
-+ .relinquish_port = ehci_relinquish_port,
-+ .port_handed_over = ehci_port_handed_over,
-+};
-+
-+static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev)
-+{
-+ struct resource *res_mem;
-+ struct usb_hcd *hcd;
-+ struct ehci_hcd *ehci;
-+ struct clk *clk;
-+ u32 reg;
-+ int ret, irq;
-+
-+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ irq = platform_get_irq(pdev, 0);;
-+ if (!res_mem || irq < 0)
-+ return -ENODEV;
-+
-+ /* enable USB host clock */
-+ clk = clk_get(&pdev->dev, "usbh");
-+ if (IS_ERR(clk))
-+ return -ENODEV;
-+
-+ clk_enable(clk);
-+ usb_host_clock = clk;
-+ msleep(100);
-+
-+ if (BCMCPU_IS_6358()) {
-+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
-+ reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+ reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
-+
-+ /*
-+ * The magic value comes for the original vendor BSP
-+ * and is needed for USB to work. Datasheet does not
-+ * help, so the magic value is used as-is.
-+ */
-+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
-+ USBH_PRIV_TEST_6358_REG);
-+
-+ } else if (BCMCPU_IS_6368()) {
-+
-+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
-+ reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
-+ reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK;
-+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
-+
-+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
-+ reg |= USBH_PRIV_SETUP_IOC_MASK;
-+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
-+ }
-+
-+ hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx");
-+ if (!hcd)
-+ return -ENOMEM;
-+ hcd->rsrc_start = res_mem->start;
-+ hcd->rsrc_len = res_mem->end - res_mem->start + 1;
-+
-+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-+ pr_debug("request_mem_region failed\n");
-+ ret = -EBUSY;
-+ goto out;
-+ }
-+
-+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-+ if (!hcd->regs) {
-+ pr_debug("ioremap failed\n");
-+ ret = -EIO;
-+ goto out1;
-+ }
-+
-+ ehci = hcd_to_ehci(hcd);
-+ ehci->big_endian_mmio = 1;
-+ ehci->big_endian_desc = 0;
-+ ehci->caps = hcd->regs;
-+ ehci->regs = hcd->regs +
-+ HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
-+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
-+ ehci->sbrn = 0x20;
-+ ehci->ignore_oc = 1;
-+
-+ ret = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-+ if (ret)
-+ goto out2;
-+
-+ platform_set_drvdata(pdev, hcd);
-+ return 0;
-+
-+out2:
-+ iounmap(hcd->regs);
-+out1:
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+out:
-+ usb_put_hcd(hcd);
-+ return ret;
-+}
-+
-+static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev)
-+{
-+ struct usb_hcd *hcd;
-+
-+ hcd = platform_get_drvdata(pdev);
-+ usb_remove_hcd(hcd);
-+ iounmap(hcd->regs);
-+ usb_put_hcd(hcd);
-+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-+ if (usb_host_clock) {
-+ clk_disable(usb_host_clock);
-+ clk_put(usb_host_clock);
-+ }
-+ platform_set_drvdata(pdev, NULL);
-+ return 0;
-+}
-+
-+static struct platform_driver ehci_hcd_bcm63xx_driver = {
-+ .probe = ehci_hcd_bcm63xx_drv_probe,
-+ .remove = __devexit_p(ehci_hcd_bcm63xx_drv_remove),
-+ .shutdown = usb_hcd_platform_shutdown,
-+ .driver = {
-+ .name = "bcm63xx_ehci",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+MODULE_ALIAS("platform:bcm63xx_ehci");
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1381,6 +1381,11 @@ MODULE_LICENSE ("GPL");
- #define PLATFORM_DRIVER ehci_mv_driver
- #endif
-
-+#ifdef CONFIG_USB_EHCI_BCM63XX
-+#include "ehci-bcm63xx.c"
-+#define PLATFORM_DRIVER ehci_hcd_bcm63xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
- !defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch b/target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch
deleted file mode 100644
index 8606d41451..0000000000
--- a/target/linux/brcm63xx/patches-3.3/403-MIPS-BCM63XX-register-ehci-device.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From a2d78246e4cb45b5978fc682aad19c0fff0cd20d Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Tue, 24 May 2011 21:50:33 +0200
-Subject: [PATCH 26/63] MIPS: BCM63XX: register ehci device.
-
----
- arch/mips/bcm63xx/Kconfig | 2 +
- arch/mips/bcm63xx/Makefile | 2 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 4 ++
- arch/mips/bcm63xx/dev-usb-ehci.c | 50 ++++++++++++++++++++
- .../asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h | 6 ++
- 5 files changed, 63 insertions(+), 1 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-usb-ehci.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -22,6 +22,7 @@ config BCM63XX_CPU_6358
- bool "support 6358 CPU"
- select HW_HAS_PCI
- select USB_ARCH_HAS_OHCI if USB_SUPPORT
-+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
-
- config BCM63XX_CPU_6362
- bool "support 6362 CPU"
-@@ -31,6 +32,7 @@ config BCM63XX_CPU_6368
- bool "support 6368 CPU"
- select HW_HAS_PCI
- select USB_ARCH_HAS_OHCI if USB_SUPPORT
-+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
- endmenu
-
- source "arch/mips/bcm63xx/boards/Kconfig"
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
- obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
- dev-dsp.o dev-enet.o dev-flash.o dev-pcmcia.o dev-rng.o \
-- dev-spi.o dev-uart.o dev-usb-ohci.o dev-wdt.o
-+ dev-spi.o dev-uart.o dev-usb-ehci.o dev-usb-ohci.o dev-wdt.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
- obj-y += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -28,6 +28,7 @@
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
- #include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
- #include <board_bcm963xx.h>
- #include <linux/bcm963xx_tag.h>
-
-@@ -917,6 +918,9 @@ int __init board_register_devices(void)
- !board_get_mac_address(board.enet1.mac_addr))
- bcm63xx_enet_register(1, &board.enet1);
-
-+ if (board.has_ehci0)
-+ bcm63xx_ehci_register();
-+
- if (board.has_ohci0)
- bcm63xx_ohci_register();
-
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -0,0 +1,50 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+
-+static struct resource ehci_resources[] = {
-+ {
-+ .start = -1, /* filled at runtime */
-+ .end = -1, /* filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = -1, /* filled at runtime */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 ehci_dmamask = ~(u32)0;
-+
-+static struct platform_device bcm63xx_ehci_device = {
-+ .name = "bcm63xx_ehci",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(ehci_resources),
-+ .resource = ehci_resources,
-+ .dev = {
-+ .dma_mask = &ehci_dmamask,
-+ .coherent_dma_mask = 0xffffffff,
-+ },
-+};
-+
-+int __init bcm63xx_ehci_register(void)
-+{
-+ if (!BCMCPU_IS_6358() && !BCMCPU_IS_6368())
-+ return 0;
-+
-+ ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
-+ ehci_resources[0].end = ehci_resources[0].start;
-+ ehci_resources[0].end += RSET_EHCI_SIZE - 1;
-+ ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0);
-+ return platform_device_register(&bcm63xx_ehci_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_usb_ehci.h
-@@ -0,0 +1,6 @@
-+#ifndef BCM63XX_DEV_USB_EHCI_H_
-+#define BCM63XX_DEV_USB_EHCI_H_
-+
-+int bcm63xx_ehci_register(void);
-+
-+#endif /* BCM63XX_DEV_USB_EHCI_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/404-bcm963xx_flashmap.patch b/target/linux/brcm63xx/patches-3.3/404-bcm963xx_flashmap.patch
deleted file mode 100644
index 8f91623c8a..0000000000
--- a/target/linux/brcm63xx/patches-3.3/404-bcm963xx_flashmap.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From a4d005c91d403d9f3d0272db6cc46202c06ec774 Mon Sep 17 00:00:00 2001
-From: Axel Gembe <ago@bastart.eu.org>
-Date: Mon, 12 May 2008 18:54:09 +0200
-Subject: [PATCH] bcm963xx: flashmap support
-
-Signed-off-by: Axel Gembe <ago@bastart.eu.org>
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 19 +----------------
- drivers/mtd/maps/bcm963xx-flash.c | 32 ++++++++++++++++++++++++----
- drivers/mtd/redboot.c | 13 +++++++++--
- 3 files changed, 38 insertions(+), 26 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -30,7 +30,7 @@ static struct mtd_partition mtd_partitio
- }
- };
-
--static const char *bcm63xx_part_types[] = { "bcm63xxpart", NULL };
-+static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
-
- static struct physmap_flash_data flash_data = {
- .width = 2,
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -72,6 +72,7 @@ static int parse_redboot_partitions(stru
- int nulllen = 0;
- int numslots;
- unsigned long offset;
-+ unsigned long fis_origin = 0;
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- static char nullstring[] = "unallocated";
- #endif
-@@ -178,6 +179,16 @@ static int parse_redboot_partitions(stru
- goto out;
- }
-
-+ if (data && data->origin) {
-+ fis_origin = data->origin;
-+ } else {
-+ for (i = 0; i < numslots; i++) {
-+ if (!strncmp(buf[i].name, "RedBoot", 8)) {
-+ fis_origin = (buf[i].flash_base & (master->size << 1) - 1);
-+ }
-+ }
-+ }
-+
- for (i = 0; i < numslots; i++) {
- struct fis_list *new_fl, **prev;
-
-@@ -198,10 +209,10 @@ static int parse_redboot_partitions(stru
- goto out;
- }
- new_fl->img = &buf[i];
-- if (data && data->origin)
-- buf[i].flash_base -= data->origin;
-- else
-- buf[i].flash_base &= master->size-1;
-+ if (fis_origin)
-+ buf[i].flash_base -= fis_origin;
-+
-+ buf[i].flash_base &= (master->size << 1) - 1;
-
- /* I'm sure the JFFS2 code has done me permanent damage.
- * I now think the following is _normal_
diff --git a/target/linux/brcm63xx/patches-3.3/405-bcm963xx_real_rootfs_length.patch b/target/linux/brcm63xx/patches-3.3/405-bcm963xx_real_rootfs_length.patch
deleted file mode 100644
index f0e6c4c78b..0000000000
--- a/target/linux/brcm63xx/patches-3.3/405-bcm963xx_real_rootfs_length.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/include/linux/bcm963xx_tag.h
-+++ b/include/linux/bcm963xx_tag.h
-@@ -85,8 +85,10 @@ struct bcm_tag {
- __u32 rootfs_crc;
- /* 224-227: CRC32 of kernel partition */
- __u32 kernel_crc;
-- /* 228-235: Unused at present */
-- char reserved1[8];
-+ /* 228-231: Image sequence number */
-+ char image_sequence[4];
-+ /* 222-235: Openwrt: real rootfs length */
-+ __u32 real_rootfs_length;
- /* 236-239: CRC32 of header excluding last 20 bytes */
- __u32 header_crc;
- /* 240-255: Unused at present */
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -131,7 +131,8 @@ static int bcm63xx_parse_cfe_partitions(
- } else {
- /* OpenWrt layout */
- rootfsaddr = kerneladdr + kernellen;
-- rootfslen = spareaddr - rootfsaddr;
-+ rootfslen = buf->real_rootfs_length;
-+ spareaddr = rootfsaddr + rootfslen;
- }
- } else {
- pr_warn("CFE boot tag CRC invalid (expected %08x, actual %08x)\n",
diff --git a/target/linux/brcm63xx/patches-3.3/406_bcm63xx_enet_vlan_incoming_fixed.patch b/target/linux/brcm63xx/patches-3.3/406_bcm63xx_enet_vlan_incoming_fixed.patch
deleted file mode 100644
index 7d9f4a96d1..0000000000
--- a/target/linux/brcm63xx/patches-3.3/406_bcm63xx_enet_vlan_incoming_fixed.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1515,7 +1515,7 @@ static int compute_hw_mtu(struct bcm_ene
- actual_mtu = mtu;
-
- /* add ethernet header + vlan tag size */
-- actual_mtu += VLAN_ETH_HLEN;
-+ actual_mtu += VLAN_ETH_HLEN + VLAN_HLEN;
-
- if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU)
- return -EINVAL;
diff --git a/target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch b/target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch
deleted file mode 100644
index 3820e63237..0000000000
--- a/target/linux/brcm63xx/patches-3.3/408-6358-enet1-external-mii-clk.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -855,6 +855,8 @@ void __init board_prom_init(void)
- if (BCMCPU_IS_6348())
- val |= GPIO_MODE_6348_G3_EXT_MII |
- GPIO_MODE_6348_G0_EXT_MII;
-+ else if (BCMCPU_IS_6358())
-+ val |= GPIO_MODE_6358_ENET1_MII_CLK_INV;
- }
-
- bcm_gpio_writel(val, GPIO_MODE_REG);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -563,6 +563,8 @@
- #define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7)
- #define GPIO_MODE_6358_SERIAL_LED (1 << 10)
- #define GPIO_MODE_6358_UTOPIA (1 << 12)
-+#define GPIO_MODE_6358_ENET1_MII_CLK_INV (1 << 30)
-+#define GPIO_MODE_6358_ENET0_MII_CLK_INV (1 << 31)
-
- #define GPIO_MODE_6368_ANALOG_AFE_0 (1 << 0)
- #define GPIO_MODE_6368_ANALOG_AFE_1 (1 << 1)
diff --git a/target/linux/brcm63xx/patches-3.3/410-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch b/target/linux/brcm63xx/patches-3.3/410-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
deleted file mode 100644
index 2102db35e8..0000000000
--- a/target/linux/brcm63xx/patches-3.3/410-NET-bcm63xx_enet-move-phy_-dis-connect-into-probe-re.patch
+++ /dev/null
@@ -1,169 +0,0 @@
-From b11218c750ab92cfab4408a0328f1b36ceec3f33 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Fri, 6 Jan 2012 12:24:18 +0100
-Subject: [PATCH 19/63] NET: bcm63xx_enet: move phy_(dis)connect into probe/remove
-
-Only connect/disconnect the phy during probe and remove, not during any
-open/close. The phy seldom changes during the runtime, and disconnecting
-the phy during close will prevent it from keeping any configuration over
-a down/up cycle.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 84 +++++++++++++-------------
- 1 files changed, 41 insertions(+), 43 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -784,10 +784,8 @@ static int bcm_enet_open(struct net_devi
- struct bcm_enet_priv *priv;
- struct sockaddr addr;
- struct device *kdev;
-- struct phy_device *phydev;
- int i, ret;
- unsigned int size;
-- char phy_id[MII_BUS_ID_SIZE + 3];
- void *p;
- u32 val;
-
-@@ -795,40 +793,10 @@ static int bcm_enet_open(struct net_devi
- kdev = &priv->pdev->dev;
-
- if (priv->has_phy) {
-- /* connect to PHY */
-- snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-- priv->mii_bus->id, priv->phy_id);
--
-- phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0,
-- PHY_INTERFACE_MODE_MII);
--
-- if (IS_ERR(phydev)) {
-- dev_err(kdev, "could not attach to PHY\n");
-- return PTR_ERR(phydev);
-- }
--
-- /* mask with MAC supported features */
-- phydev->supported &= (SUPPORTED_10baseT_Half |
-- SUPPORTED_10baseT_Full |
-- SUPPORTED_100baseT_Half |
-- SUPPORTED_100baseT_Full |
-- SUPPORTED_Autoneg |
-- SUPPORTED_Pause |
-- SUPPORTED_MII);
-- phydev->advertising = phydev->supported;
--
-- if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
-- phydev->advertising |= SUPPORTED_Pause;
-- else
-- phydev->advertising &= ~SUPPORTED_Pause;
--
-- dev_info(kdev, "attached PHY at address %d [%s]\n",
-- phydev->addr, phydev->drv->name);
--
-+ /* Reset state */
- priv->old_link = 0;
- priv->old_duplex = -1;
- priv->old_pause = -1;
-- priv->phydev = phydev;
- }
-
- /* mask all interrupts and request them */
-@@ -838,7 +806,7 @@ static int bcm_enet_open(struct net_devi
-
- ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
- if (ret)
-- goto out_phy_disconnect;
-+ return ret;
-
- ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, IRQF_DISABLED,
- dev->name, dev);
-@@ -1025,9 +993,6 @@ out_freeirq_rx:
- out_freeirq:
- free_irq(dev->irq, dev);
-
--out_phy_disconnect:
-- phy_disconnect(priv->phydev);
--
- return ret;
- }
-
-@@ -1132,12 +1097,6 @@ static int bcm_enet_stop(struct net_devi
- free_irq(priv->irq_rx, dev);
- free_irq(dev->irq, dev);
-
-- /* release phy */
-- if (priv->has_phy) {
-- phy_disconnect(priv->phydev);
-- priv->phydev = NULL;
-- }
--
- return 0;
- }
-
-@@ -1714,6 +1673,8 @@ static int __devinit bcm_enet_probe(stru
-
- /* MII bus registration */
- if (priv->has_phy) {
-+ struct phy_device *phydev;
-+ char phy_id[MII_BUS_ID_SIZE + 3];
-
- priv->mii_bus = mdiobus_alloc();
- if (!priv->mii_bus) {
-@@ -1750,6 +1711,38 @@ static int __devinit bcm_enet_probe(stru
- dev_err(&pdev->dev, "unable to register mdio bus\n");
- goto out_free_mdio;
- }
-+
-+ /* connect to PHY */
-+ snprintf(phy_id, sizeof(phy_id), PHY_ID_FMT,
-+ priv->mii_bus->id, priv->phy_id);
-+
-+ phydev = phy_connect(dev, phy_id, bcm_enet_adjust_phy_link, 0,
-+ PHY_INTERFACE_MODE_MII);
-+
-+ if (IS_ERR(phydev)) {
-+ dev_err(&pdev->dev, "could not attach to PHY\n");
-+ goto out_unregister_mdio;
-+ }
-+
-+ /* mask with MAC supported features */
-+ phydev->supported &= (SUPPORTED_10baseT_Half |
-+ SUPPORTED_10baseT_Full |
-+ SUPPORTED_100baseT_Half |
-+ SUPPORTED_100baseT_Full |
-+ SUPPORTED_Autoneg |
-+ SUPPORTED_Pause |
-+ SUPPORTED_MII);
-+ phydev->advertising = phydev->supported;
-+
-+ if (priv->pause_auto && priv->pause_rx && priv->pause_tx)
-+ phydev->advertising |= SUPPORTED_Pause;
-+ else
-+ phydev->advertising &= ~SUPPORTED_Pause;
-+
-+ dev_info(&pdev->dev, "attached PHY at address %d [%s]\n",
-+ phydev->addr, phydev->drv->name);
-+
-+ priv->phydev = phydev;
- } else {
-
- /* run platform code to initialize PHY device */
-@@ -1795,6 +1788,9 @@ static int __devinit bcm_enet_probe(stru
- return 0;
-
- out_unregister_mdio:
-+ if (priv->phydev)
-+ phy_disconnect(priv->phydev);
-+
- if (priv->mii_bus) {
- mdiobus_unregister(priv->mii_bus);
- kfree(priv->mii_bus->irq);
-@@ -1845,6 +1841,8 @@ static int __devexit bcm_enet_remove(str
- enet_writel(priv, 0, ENET_MIISC_REG);
-
- if (priv->has_phy) {
-+ phy_disconnect(priv->phydev);
-+ priv->phydev = NULL;
- mdiobus_unregister(priv->mii_bus);
- kfree(priv->mii_bus->irq);
- mdiobus_free(priv->mii_bus);
diff --git a/target/linux/brcm63xx/patches-3.3/411-bcm63xx_enet-implement-reset_autoneg-ethtool.patch b/target/linux/brcm63xx/patches-3.3/411-bcm63xx_enet-implement-reset_autoneg-ethtool.patch
deleted file mode 100644
index d143b473d8..0000000000
--- a/target/linux/brcm63xx/patches-3.3/411-bcm63xx_enet-implement-reset_autoneg-ethtool.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From accc558f334662c8b16c121b4819931c028e8eb0 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Mon, 8 Jun 2009 16:12:10 +0200
-Subject: [PATCH 27/63] bcm63xx_enet: implement reset_autoneg ethtool.
-
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 15 +++++++++++++++
- 1 files changed, 15 insertions(+), 0 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1290,6 +1290,20 @@ static void bcm_enet_get_ethtool_stats(s
- mutex_unlock(&priv->mib_update_lock);
- }
-
-+static int bcm_enet_nway_reset(struct net_device *dev)
-+{
-+ struct bcm_enet_priv *priv;
-+
-+ priv = netdev_priv(dev);
-+ if (priv->has_phy) {
-+ if (!priv->phydev)
-+ return -ENODEV;
-+ return genphy_restart_aneg(priv->phydev);
-+ }
-+
-+ return -EOPNOTSUPP;
-+}
-+
- static int bcm_enet_get_settings(struct net_device *dev,
- struct ethtool_cmd *cmd)
- {
-@@ -1432,6 +1446,7 @@ static const struct ethtool_ops bcm_enet
- .get_strings = bcm_enet_get_strings,
- .get_sset_count = bcm_enet_get_sset_count,
- .get_ethtool_stats = bcm_enet_get_ethtool_stats,
-+ .nway_reset = bcm_enet_nway_reset,
- .get_settings = bcm_enet_get_settings,
- .set_settings = bcm_enet_set_settings,
- .get_drvinfo = bcm_enet_get_drvinfo,
diff --git a/target/linux/brcm63xx/patches-3.3/412-bcm63xx_enet-use-resource_size.patch b/target/linux/brcm63xx/patches-3.3/412-bcm63xx_enet-use-resource_size.patch
deleted file mode 100644
index 11d035dd51..0000000000
--- a/target/linux/brcm63xx/patches-3.3/412-bcm63xx_enet-use-resource_size.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From dbd9b51204aa4114756b8659e180139ef3878032 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Thu, 21 Jan 2010 17:28:36 +0100
-Subject: [PATCH 28/63] bcm63xx_enet: use resource_size().
-
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 18 ++++++++----------
- 1 files changed, 8 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1594,7 +1594,6 @@ static int __devinit bcm_enet_probe(stru
- struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx;
- struct mii_bus *bus;
- const char *clk_name;
-- unsigned int iomem_size;
- int i, ret;
-
- /* stop if shared driver failed, assume driver->probe will be
-@@ -1619,13 +1618,13 @@ static int __devinit bcm_enet_probe(stru
- if (ret)
- goto out;
-
-- iomem_size = resource_size(res_mem);
-- if (!request_mem_region(res_mem->start, iomem_size, "bcm63xx_enet")) {
-+ if (!request_mem_region(res_mem->start, resource_size(res_mem),
-+ "bcm63xx_enet")) {
- ret = -EBUSY;
- goto out;
- }
-
-- priv->base = ioremap(res_mem->start, iomem_size);
-+ priv->base = ioremap(res_mem->start, resource_size(res_mem));
- if (priv->base == NULL) {
- ret = -ENOMEM;
- goto out_release_mem;
-@@ -1831,7 +1830,7 @@ out_unmap:
- iounmap(priv->base);
-
- out_release_mem:
-- release_mem_region(res_mem->start, iomem_size);
-+ release_mem_region(res_mem->start, resource_size(res_mem));
- out:
- free_netdev(dev);
- return ret;
-@@ -1903,19 +1902,18 @@ struct platform_driver bcm63xx_enet_driv
- static int __devinit bcm_enet_shared_probe(struct platform_device *pdev)
- {
- struct resource *res;
-- unsigned int iomem_size;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res)
- return -ENODEV;
-
-- iomem_size = resource_size(res);
-- if (!request_mem_region(res->start, iomem_size, "bcm63xx_enet_dma"))
-+ if (!request_mem_region(res->start, resource_size(res),
-+ "bcm63xx_enet_dma"))
- return -EBUSY;
-
-- bcm_enet_shared_base = ioremap(res->start, iomem_size);
-+ bcm_enet_shared_base = ioremap(res->start, resource_size(res));
- if (!bcm_enet_shared_base) {
-- release_mem_region(res->start, iomem_size);
-+ release_mem_region(res->start, resource_size(res));
- return -ENOMEM;
- }
- return 0;
diff --git a/target/linux/brcm63xx/patches-3.3/413-bcm63xx_enet-disable-clock-when-uninitializing-devic.patch b/target/linux/brcm63xx/patches-3.3/413-bcm63xx_enet-disable-clock-when-uninitializing-devic.patch
deleted file mode 100644
index a98bea9001..0000000000
--- a/target/linux/brcm63xx/patches-3.3/413-bcm63xx_enet-disable-clock-when-uninitializing-devic.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From fd15ecd10c95480be5635f8993b781fe3a1527c2 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Fri, 29 Apr 2011 16:54:50 +0200
-Subject: [PATCH 29/63] bcm63xx_enet: disable clock when uninitializing device.
-
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 ++
- 1 files changed, 2 insertions(+), 0 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -1870,6 +1870,8 @@ static int __devexit bcm_enet_remove(str
- }
-
- /* release device resources */
-+ clk_disable(priv->mac_clk);
-+ clk_put(priv->mac_clk);
- iounmap(priv->base);
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(res->start, resource_size(res));
diff --git a/target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch b/target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch
deleted file mode 100644
index 90999fa952..0000000000
--- a/target/linux/brcm63xx/patches-3.3/414-bcm63xx_enet-split-dma-registers-access.patch
+++ /dev/null
@@ -1,381 +0,0 @@
-From 305579c1f946ed1aa6c125252ace21c53d47c11d Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Thu, 21 Jan 2010 17:50:54 +0100
-Subject: [PATCH 30/63] bcm63xx_enet: split dma registers access.
-
----
- arch/mips/bcm63xx/dev-enet.c | 23 +++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h | 4 +-
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 179 ++++++++++++++--------
- 3 files changed, 138 insertions(+), 68 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -19,6 +19,16 @@ static struct resource shared_res[] = {
- .end = -1, /* filled at runtime */
- .flags = IORESOURCE_MEM,
- },
-+ {
-+ .start = -1, /* filled at runtime */
-+ .end = -1, /* filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = -1, /* filled at runtime */
-+ .end = -1, /* filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ },
- };
-
- static struct platform_device bcm63xx_enet_shared_device = {
-@@ -110,10 +120,15 @@ int __init bcm63xx_enet_register(int uni
- if (!shared_device_registered) {
- shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
- shared_res[0].end = shared_res[0].start;
-- if (BCMCPU_IS_6338())
-- shared_res[0].end += (RSET_ENETDMA_SIZE / 2) - 1;
-- else
-- shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
-+ shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
-+
-+ shared_res[1].start = bcm63xx_regset_address(RSET_ENETDMAC);
-+ shared_res[1].end = shared_res[1].start;
-+ shared_res[1].end += RSET_ENETDMAC_SIZE(16) - 1;
-+
-+ shared_res[2].start = bcm63xx_regset_address(RSET_ENETDMAS);
-+ shared_res[2].end = shared_res[2].start;
-+ shared_res[2].end += RSET_ENETDMAS_SIZE(16) - 1;
-
- ret = platform_device_register(&bcm63xx_enet_shared_device);
- if (ret)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -172,7 +172,9 @@ enum bcm63xx_regs_set {
- #define BCM_6358_RSET_SPI_SIZE 1804
- #define BCM_6368_RSET_SPI_SIZE 1804
- #define RSET_ENET_SIZE 2048
--#define RSET_ENETDMA_SIZE 2048
-+#define RSET_ENETDMA_SIZE 256
-+#define RSET_ENETDMAC_SIZE(chans) (16 * (chans))
-+#define RSET_ENETDMAS_SIZE(chans) (16 * (chans))
- #define RSET_ENETSW_SIZE 65536
- #define RSET_UART_SIZE 24
- #define RSET_HSSPI_SIZE 1536
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -41,8 +41,8 @@ static int copybreak __read_mostly = 128
- module_param(copybreak, int, 0);
- MODULE_PARM_DESC(copybreak, "Receive copy threshold");
-
--/* io memory shared between all devices */
--static void __iomem *bcm_enet_shared_base;
-+/* io registers memory shared between all devices */
-+static void __iomem *bcm_enet_shared_base[3];
-
- /*
- * io helpers to access mac registers
-@@ -63,13 +63,35 @@ static inline void enet_writel(struct bc
- */
- static inline u32 enet_dma_readl(struct bcm_enet_priv *priv, u32 off)
- {
-- return bcm_readl(bcm_enet_shared_base + off);
-+ return bcm_readl(bcm_enet_shared_base[0] + off);
- }
-
- static inline void enet_dma_writel(struct bcm_enet_priv *priv,
- u32 val, u32 off)
- {
-- bcm_writel(val, bcm_enet_shared_base + off);
-+ bcm_writel(val, bcm_enet_shared_base[0] + off);
-+}
-+
-+static inline u32 enet_dmac_readl(struct bcm_enet_priv *priv, u32 off)
-+{
-+ return bcm_readl(bcm_enet_shared_base[1] + off);
-+}
-+
-+static inline void enet_dmac_writel(struct bcm_enet_priv *priv,
-+ u32 val, u32 off)
-+{
-+ bcm_writel(val, bcm_enet_shared_base[1] + off);
-+}
-+
-+static inline u32 enet_dmas_readl(struct bcm_enet_priv *priv, u32 off)
-+{
-+ return bcm_readl(bcm_enet_shared_base[2] + off);
-+}
-+
-+static inline void enet_dmas_writel(struct bcm_enet_priv *priv,
-+ u32 val, u32 off)
-+{
-+ bcm_writel(val, bcm_enet_shared_base[2] + off);
- }
-
- /*
-@@ -353,8 +375,8 @@ static int bcm_enet_receive_queue(struct
- bcm_enet_refill_rx(dev);
-
- /* kick rx dma */
-- enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-- ENETDMA_CHANCFG_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
-+ ENETDMAC_CHANCFG_REG(priv->rx_chan));
- }
-
- return processed;
-@@ -429,10 +451,10 @@ static int bcm_enet_poll(struct napi_str
- dev = priv->net_dev;
-
- /* ack interrupts */
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IR_REG(priv->rx_chan));
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IR_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+ ENETDMAC_IR_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+ ENETDMAC_IR_REG(priv->tx_chan));
-
- /* reclaim sent skb */
- tx_work_done = bcm_enet_tx_reclaim(dev, 0);
-@@ -451,10 +473,10 @@ static int bcm_enet_poll(struct napi_str
- napi_complete(napi);
-
- /* restore rx/tx interrupt */
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IRMASK_REG(priv->rx_chan));
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IRMASK_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+ ENETDMAC_IRMASK_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+ ENETDMAC_IRMASK_REG(priv->tx_chan));
-
- return rx_work_done;
- }
-@@ -497,8 +519,8 @@ static irqreturn_t bcm_enet_isr_dma(int
- priv = netdev_priv(dev);
-
- /* mask rx/tx interrupts */
-- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-
- napi_schedule(&priv->napi);
-
-@@ -557,8 +579,8 @@ static int bcm_enet_start_xmit(struct sk
- wmb();
-
- /* kick tx dma */
-- enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-- ENETDMA_CHANCFG_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
-+ ENETDMAC_CHANCFG_REG(priv->tx_chan));
-
- /* stop queue if no more desc available */
- if (!priv->tx_desc_count)
-@@ -801,8 +823,8 @@ static int bcm_enet_open(struct net_devi
-
- /* mask all interrupts and request them */
- enet_writel(priv, 0, ENET_IRMASK_REG);
-- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-
- ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
- if (ret)
-@@ -891,28 +913,28 @@ static int bcm_enet_open(struct net_devi
- }
-
- /* write rx & tx ring addresses */
-- enet_dma_writel(priv, priv->rx_desc_dma,
-- ENETDMA_RSTART_REG(priv->rx_chan));
-- enet_dma_writel(priv, priv->tx_desc_dma,
-- ENETDMA_RSTART_REG(priv->tx_chan));
-+ enet_dmas_writel(priv, priv->rx_desc_dma,
-+ ENETDMAS_RSTART_REG(priv->rx_chan));
-+ enet_dmas_writel(priv, priv->tx_desc_dma,
-+ ENETDMAS_RSTART_REG(priv->tx_chan));
-
- /* clear remaining state ram for rx & tx channel */
-- enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan));
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->rx_chan));
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->tx_chan));
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->rx_chan));
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->tx_chan));
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->rx_chan));
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan));
-
- /* set max rx/tx length */
- enet_writel(priv, priv->hw_mtu, ENET_RXMAXLEN_REG);
- enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG);
-
- /* set dma maximum burst len */
-- enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
-- ENETDMA_MAXBURST_REG(priv->rx_chan));
-- enet_dma_writel(priv, BCMENET_DMA_MAXBURST,
-- ENETDMA_MAXBURST_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+ ENETDMAC_MAXBURST_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+ ENETDMAC_MAXBURST_REG(priv->tx_chan));
-
- /* set correct transmit fifo watermark */
- enet_writel(priv, BCMENET_TX_FIFO_TRESH, ENET_TXWMARK_REG);
-@@ -930,26 +952,26 @@ static int bcm_enet_open(struct net_devi
- val |= ENET_CTL_ENABLE_MASK;
- enet_writel(priv, val, ENET_CTL_REG);
- enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
-- enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK,
-- ENETDMA_CHANCFG_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
-+ ENETDMAC_CHANCFG_REG(priv->rx_chan));
-
- /* watch "mib counters about to overflow" interrupt */
- enet_writel(priv, ENET_IR_MIB, ENET_IR_REG);
- enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG);
-
- /* watch "packet transferred" interrupt in rx and tx */
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IR_REG(priv->rx_chan));
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IR_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+ ENETDMAC_IR_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+ ENETDMAC_IR_REG(priv->tx_chan));
-
- /* make sure we enable napi before rx interrupt */
- napi_enable(&priv->napi);
-
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IRMASK_REG(priv->rx_chan));
-- enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK,
-- ENETDMA_IRMASK_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+ ENETDMAC_IRMASK_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+ ENETDMAC_IRMASK_REG(priv->tx_chan));
-
- if (priv->has_phy)
- phy_start(priv->phydev);
-@@ -1026,14 +1048,14 @@ static void bcm_enet_disable_dma(struct
- {
- int limit;
-
-- enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_CHANCFG_REG(chan));
-
- limit = 1000;
- do {
- u32 val;
-
-- val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan));
-- if (!(val & ENETDMA_CHANCFG_EN_MASK))
-+ val = enet_dmac_readl(priv, ENETDMAC_CHANCFG_REG(chan));
-+ if (!(val & ENETDMAC_CHANCFG_EN_MASK))
- break;
- udelay(1);
- } while (limit--);
-@@ -1059,8 +1081,8 @@ static int bcm_enet_stop(struct net_devi
-
- /* mask all interrupts */
- enet_writel(priv, 0, ENET_IRMASK_REG);
-- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan));
-- enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-
- /* make sure no mib update is scheduled */
- cancel_work_sync(&priv->mib_update_task);
-@@ -1598,7 +1620,7 @@ static int __devinit bcm_enet_probe(stru
-
- /* stop if shared driver failed, assume driver->probe will be
- * called in the same order we register devices (correct ?) */
-- if (!bcm_enet_shared_base)
-+ if (!bcm_enet_shared_base[0])
- return -ENODEV;
-
- res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-@@ -1904,30 +1926,61 @@ struct platform_driver bcm63xx_enet_driv
- static int __devinit bcm_enet_shared_probe(struct platform_device *pdev)
- {
- struct resource *res;
-+ int ret, i, requested[3];
-
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- if (!res)
-- return -ENODEV;
-+ memset(bcm_enet_shared_base, 0, sizeof (bcm_enet_shared_base));
-+ memset(requested, 0, sizeof (requested));
-
-- if (!request_mem_region(res->start, resource_size(res),
-- "bcm63xx_enet_dma"))
-- return -EBUSY;
-+ for (i = 0; i < 3; i++) {
-+ void __iomem *p;
-
-- bcm_enet_shared_base = ioremap(res->start, resource_size(res));
-- if (!bcm_enet_shared_base) {
-- release_mem_region(res->start, resource_size(res));
-- return -ENOMEM;
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res) {
-+ ret = -EINVAL;
-+ goto fail;
-+ }
-+
-+ if (!request_mem_region(res->start, resource_size(res),
-+ "bcm63xx_enet_dma")) {
-+ ret = -EBUSY;
-+ goto fail;
-+ }
-+ requested[i] = 0;
-+
-+ p = ioremap(res->start, resource_size(res));
-+ if (!p) {
-+ ret = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ bcm_enet_shared_base[i] = p;
- }
-+
- return 0;
-+
-+fail:
-+ for (i = 0; i < 3; i++) {
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res)
-+ continue;
-+ if (bcm_enet_shared_base[i])
-+ iounmap(bcm_enet_shared_base[i]);
-+ if (requested[i])
-+ release_mem_region(res->start, resource_size(res));
-+ }
-+ return ret;
- }
-
- static int __devexit bcm_enet_shared_remove(struct platform_device *pdev)
- {
- struct resource *res;
-+ int i;
-
-- iounmap(bcm_enet_shared_base);
-- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-- release_mem_region(res->start, resource_size(res));
-+ for (i = 0; i < 3; i++) {
-+ iounmap(bcm_enet_shared_base[i]);
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ release_mem_region(res->start, resource_size(res));
-+ }
- return 0;
- }
-
diff --git a/target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch b/target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch
deleted file mode 100644
index 67bf01a3fe..0000000000
--- a/target/linux/brcm63xx/patches-3.3/415-bcm63xx_enet-add-support-for-bcm6368-internal-ethern.patch
+++ /dev/null
@@ -1,1490 +0,0 @@
-From 1324bb5db6815d19b09c1b7bcac3cc2804412205 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Sat, 23 Jan 2010 03:01:02 +0100
-Subject: [PATCH 31/63] bcm63xx_enet: add support for bcm6368 internal ethernet switch.
-
----
- arch/mips/bcm63xx/dev-enet.c | 106 ++-
- .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 25 +
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 50 +
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 1054 ++++++++++++++++++--
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 71 ++
- 5 files changed, 1221 insertions(+), 85 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -920,6 +920,10 @@ int __init board_register_devices(void)
- !board_get_mac_address(board.enet1.mac_addr))
- bcm63xx_enet_register(1, &board.enet1);
-
-+ if (board.has_enetsw &&
-+ !board_get_mac_address(board.enetsw.mac_addr))
-+ bcm63xx_enetsw_register(&board.enetsw);
-+
- if (board.has_ehci0)
- bcm63xx_ehci_register();
-
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -41,6 +41,7 @@ struct board_info {
- /* enabled feature/device */
- unsigned int has_enet0:1;
- unsigned int has_enet1:1;
-+ unsigned int has_enetsw:1;
- unsigned int has_pci:1;
- unsigned int has_pccard:1;
- unsigned int has_ohci0:1;
-@@ -52,6 +53,7 @@ struct board_info {
- /* ethernet config */
- struct bcm63xx_enet_platform_data enet0;
- struct bcm63xx_enet_platform_data enet1;
-+ struct bcm63xx_enetsw_platform_data enetsw;
-
- /* DSP config */
- struct bcm63xx_dsp_platform_data dsp;
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -104,6 +104,64 @@ static struct platform_device bcm63xx_en
- },
- };
-
-+static struct resource enetsw_res[] = {
-+ {
-+ /* start & end filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ /* start filled at runtime */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+ {
-+ /* start filled at runtime */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct bcm63xx_enetsw_platform_data enetsw_pd;
-+
-+static struct platform_device bcm63xx_enetsw_device = {
-+ .name = "bcm63xx_enetsw",
-+ .num_resources = ARRAY_SIZE(enetsw_res),
-+ .resource = enetsw_res,
-+ .dev = {
-+ .platform_data = &enetsw_pd,
-+ },
-+};
-+
-+static int __init register_shared(void)
-+{
-+ int ret, chan_count;
-+
-+ if (shared_device_registered)
-+ return 0;
-+
-+ shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
-+ shared_res[0].end = shared_res[0].start;
-+ shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
-+
-+ if (BCMCPU_IS_6368())
-+ chan_count = 32;
-+ else
-+ chan_count = 16;
-+
-+ shared_res[1].start = bcm63xx_regset_address(RSET_ENETDMAC);
-+ shared_res[1].end = shared_res[1].start;
-+ shared_res[1].end += RSET_ENETDMAC_SIZE(chan_count) - 1;
-+
-+ shared_res[2].start = bcm63xx_regset_address(RSET_ENETDMAS);
-+ shared_res[2].end = shared_res[2].start;
-+ shared_res[2].end += RSET_ENETDMAS_SIZE(chan_count) - 1;
-+
-+ ret = platform_device_register(&bcm63xx_enet_shared_device);
-+ if (ret)
-+ return ret;
-+ shared_device_registered = 1;
-+
-+ return 0;
-+}
-+
- int __init bcm63xx_enet_register(int unit,
- const struct bcm63xx_enet_platform_data *pd)
- {
-@@ -117,24 +175,9 @@ int __init bcm63xx_enet_register(int uni
- if (unit == 1 && BCMCPU_IS_6338())
- return -ENODEV;
-
-- if (!shared_device_registered) {
-- shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
-- shared_res[0].end = shared_res[0].start;
-- shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
--
-- shared_res[1].start = bcm63xx_regset_address(RSET_ENETDMAC);
-- shared_res[1].end = shared_res[1].start;
-- shared_res[1].end += RSET_ENETDMAC_SIZE(16) - 1;
--
-- shared_res[2].start = bcm63xx_regset_address(RSET_ENETDMAS);
-- shared_res[2].end = shared_res[2].start;
-- shared_res[2].end += RSET_ENETDMAS_SIZE(16) - 1;
--
-- ret = platform_device_register(&bcm63xx_enet_shared_device);
-- if (ret)
-- return ret;
-- shared_device_registered = 1;
-- }
-+ ret = register_shared();
-+ if (ret)
-+ return ret;
-
- if (unit == 0) {
- enet0_res[0].start = bcm63xx_regset_address(RSET_ENET0);
-@@ -175,3 +218,30 @@ int __init bcm63xx_enet_register(int uni
- return ret;
- return 0;
- }
-+
-+int __init
-+bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd)
-+{
-+ int ret;
-+
-+ if (!BCMCPU_IS_6368())
-+ return -ENODEV;
-+
-+ ret = register_shared();
-+ if (ret)
-+ return ret;
-+
-+ enetsw_res[0].start = bcm63xx_regset_address(RSET_ENETSW);
-+ enetsw_res[0].end = enetsw_res[0].start;
-+ enetsw_res[0].end += RSET_ENETSW_SIZE - 1;
-+ enetsw_res[1].start = bcm63xx_get_irq_number(IRQ_ENETSW_RXDMA0);
-+ enetsw_res[2].start = bcm63xx_get_irq_number(IRQ_ENETSW_TXDMA0);
-+
-+ memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof (*pd));
-+
-+ ret = platform_device_register(&bcm63xx_enetsw_device);
-+ if (ret)
-+ return ret;
-+
-+ return 0;
-+}
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -39,7 +39,32 @@ struct bcm63xx_enet_platform_data {
- int phy_id, int reg, int val));
- };
-
-+/*
-+ * on board ethernet switch platform data
-+ */
-+#define ENETSW_MAX_PORT 6
-+
-+struct bcm63xx_enetsw_port {
-+ int used;
-+ int external_phy;
-+ int phy_id;
-+
-+ int bypass_link;
-+ int force_speed;
-+ int force_duplex_full;
-+
-+ const char *name;
-+};
-+
-+struct bcm63xx_enetsw_platform_data {
-+ char mac_addr[ETH_ALEN];
-+ struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-+};
-+
- int __init bcm63xx_enet_register(int unit,
- const struct bcm63xx_enet_platform_data *pd);
-
-+int __init
-+bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd);
-+
- #endif /* ! BCM63XX_DEV_ENET_H_ */
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -809,10 +809,60 @@
- * _REG relative to RSET_ENETSW
- *************************************************************************/
-
-+/* Port traffic control */
-+#define ENETSW_PTCTRL_REG(x) (0x0 + (x))
-+#define ENETSW_PTCTRL_RXDIS_MASK (1 << 0)
-+#define ENETSW_PTCTRL_TXDIS_MASK (1 << 1)
-+
-+/* Switch mode register */
-+#define ENETSW_SWMODE_REG (0xb)
-+#define ENETSW_SWMODE_FWD_EN_MASK (1 << 1)
-+
-+/* IMP override Register */
-+#define ENETSW_IMPOV_REG (0xe)
-+#define ENETSW_IMPOV_FORCE_MASK (1 << 7)
-+#define ENETSW_IMPOV_TXFLOW_MASK (1 << 5)
-+#define ENETSW_IMPOV_RXFLOW_MASK (1 << 4)
-+#define ENETSW_IMPOV_1000_MASK (1 << 3)
-+#define ENETSW_IMPOV_100_MASK (1 << 2)
-+#define ENETSW_IMPOV_FDX_MASK (1 << 1)
-+#define ENETSW_IMPOV_LINKUP_MASK (1 << 0)
-+
-+/* Port override Register */
-+#define ENETSW_PORTOV_REG(x) (0x58 + (x))
-+#define ENETSW_PORTOV_ENABLE_MASK (1 << 6)
-+#define ENETSW_PORTOV_TXFLOW_MASK (1 << 5)
-+#define ENETSW_PORTOV_RXFLOW_MASK (1 << 4)
-+#define ENETSW_PORTOV_1000_MASK (1 << 3)
-+#define ENETSW_PORTOV_100_MASK (1 << 2)
-+#define ENETSW_PORTOV_FDX_MASK (1 << 1)
-+#define ENETSW_PORTOV_LINKUP_MASK (1 << 0)
-+
-+/* MDIO control register */
-+#define ENETSW_MDIOC_REG (0xb0)
-+#define ENETSW_MDIOC_EXT_MASK (1 << 16)
-+#define ENETSW_MDIOC_REG_SHIFT 20
-+#define ENETSW_MDIOC_PHYID_SHIFT 25
-+#define ENETSW_MDIOC_RD_MASK (1 << 30)
-+#define ENETSW_MDIOC_WR_MASK (1 << 31)
-+
-+/* MDIO data register */
-+#define ENETSW_MDIOD_REG (0xb4)
-+
-+/* Global Management Configuration Register */
-+#define ENETSW_GMCR_REG (0x200)
-+#define ENETSW_GMCR_RST_MIB_MASK (1 << 0)
-+
- /* MIB register */
- #define ENETSW_MIB_REG(x) (0x2800 + (x) * 4)
- #define ENETSW_MIB_REG_COUNT 47
-
-+/* Jumbo control register port mask register */
-+#define ENETSW_JMBCTL_PORT_REG (0x4004)
-+
-+/* Jumbo control mib good frame register */
-+#define ENETSW_JMBCTL_MAXSIZE_REG (0x4008)
-+
-
- /*************************************************************************
- * _REG relative to RSET_OHCI_PRIV
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -59,6 +59,49 @@ static inline void enet_writel(struct bc
- }
-
- /*
-+ * io helpers to access switch registers
-+ */
-+static inline u32 enetsw_readl(struct bcm_enet_priv *priv, u32 off)
-+{
-+ /* printk("enetsw_readl at %p\n", priv->base + off); */
-+ return bcm_readl(priv->base + off);
-+}
-+
-+static inline void enetsw_writel(struct bcm_enet_priv *priv,
-+ u32 val, u32 off)
-+{
-+ /* printk("enetsw_writel %08x at %p\n", val, priv->base + off); */
-+ bcm_writel(val, priv->base + off);
-+}
-+
-+static inline u16 enetsw_readw(struct bcm_enet_priv *priv, u32 off)
-+{
-+ /* printk("enetsw_readw at %p\n", priv->base + off); */
-+ return bcm_readw(priv->base + off);
-+}
-+
-+static inline void enetsw_writew(struct bcm_enet_priv *priv,
-+ u16 val, u32 off)
-+{
-+ /* printk("enetsw_writew %04x at %p\n", val, priv->base + off); */
-+ bcm_writew(val, priv->base + off);
-+}
-+
-+static inline u8 enetsw_readb(struct bcm_enet_priv *priv, u32 off)
-+{
-+ /* printk("enetsw_readb at %p\n", priv->base + off); */
-+ return bcm_readb(priv->base + off);
-+}
-+
-+static inline void enetsw_writeb(struct bcm_enet_priv *priv,
-+ u8 val, u32 off)
-+{
-+ /* printk("enetsw_writeb %02x at %p\n", val, priv->base + off); */
-+ bcm_writeb(val, priv->base + off);
-+}
-+
-+
-+/*
- * io helpers to access shared registers
- */
- static inline u32 enet_dma_readl(struct bcm_enet_priv *priv, u32 off)
-@@ -321,7 +364,8 @@ static int bcm_enet_receive_queue(struct
- }
-
- /* recycle packet if it's marked as bad */
-- if (unlikely(len_stat & DMADESC_ERR_MASK)) {
-+ if (!bcm_enet_is_sw(priv) &&
-+ unlikely(len_stat & DMADESC_ERR_MASK)) {
- dev->stats.rx_errors++;
-
- if (len_stat & DMADESC_OVSIZE_MASK)
-@@ -552,6 +596,26 @@ static int bcm_enet_start_xmit(struct sk
- goto out_unlock;
- }
-
-+ /* pad small packets sent on a switch device */
-+ if (bcm_enet_is_sw(priv) && skb->len < 64) {
-+ int needed = 64 - skb->len;
-+ char *data;
-+
-+ if (unlikely(skb_tailroom(skb) < needed)) {
-+ struct sk_buff *nskb;
-+
-+ nskb = skb_copy_expand(skb, 0, needed, GFP_ATOMIC);
-+ if (!nskb) {
-+ ret = NETDEV_TX_BUSY;
-+ goto out_unlock;
-+ }
-+ dev_kfree_skb(skb);
-+ skb = nskb;
-+ }
-+ data = skb_put(skb, needed);
-+ memset(data, 0, needed);
-+ }
-+
- /* point to the next available desc */
- desc = &priv->tx_desc_cpu[priv->tx_curr_desc];
- priv->tx_skb[priv->tx_curr_desc] = skb;
-@@ -1921,96 +1985,951 @@ struct platform_driver bcm63xx_enet_driv
- };
-
- /*
-- * reserve & remap memory space shared between all macs
-+ * switch mii access callbacks
- */
--static int __devinit bcm_enet_shared_probe(struct platform_device *pdev)
-+static int bcmenet_sw_mdio_read(struct bcm_enet_priv *priv,
-+ int ext, int phy_id, int location)
- {
-- struct resource *res;
-- int ret, i, requested[3];
-+ u32 reg;
-+ int ret;
-
-- memset(bcm_enet_shared_base, 0, sizeof (bcm_enet_shared_base));
-- memset(requested, 0, sizeof (requested));
-+ spin_lock_bh(&priv->enetsw_mdio_lock);
-+ enetsw_writel(priv, 0, ENETSW_MDIOC_REG);
-
-- for (i = 0; i < 3; i++) {
-- void __iomem *p;
-+ reg = ENETSW_MDIOC_RD_MASK |
-+ (phy_id << ENETSW_MDIOC_PHYID_SHIFT) |
-+ (location << ENETSW_MDIOC_REG_SHIFT);
-+
-+ if (ext)
-+ reg |= ENETSW_MDIOC_EXT_MASK;
-+
-+ enetsw_writel(priv, reg, ENETSW_MDIOC_REG);
-+ udelay(50);
-+ ret = enetsw_readw(priv, ENETSW_MDIOD_REG);
-+ spin_unlock_bh(&priv->enetsw_mdio_lock);
-+ return ret;
-+}
-
-- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-- if (!res) {
-- ret = -EINVAL;
-- goto fail;
-- }
-+static void bcmenet_sw_mdio_write(struct bcm_enet_priv *priv,
-+ int ext, int phy_id, int location,
-+ uint16_t data)
-+{
-+ u32 reg;
-
-- if (!request_mem_region(res->start, resource_size(res),
-- "bcm63xx_enet_dma")) {
-- ret = -EBUSY;
-- goto fail;
-- }
-- requested[i] = 0;
-+ spin_lock_bh(&priv->enetsw_mdio_lock);
-+ enetsw_writel(priv, 0, ENETSW_MDIOC_REG);
-
-- p = ioremap(res->start, resource_size(res));
-- if (!p) {
-- ret = -ENOMEM;
-- goto fail;
-- }
-+ reg = ENETSW_MDIOC_WR_MASK |
-+ (phy_id << ENETSW_MDIOC_PHYID_SHIFT) |
-+ (location << ENETSW_MDIOC_REG_SHIFT);
-
-- bcm_enet_shared_base[i] = p;
-- }
-+ if (ext)
-+ reg |= ENETSW_MDIOC_EXT_MASK;
-
-- return 0;
-+ reg |= data;
-
--fail:
-- for (i = 0; i < 3; i++) {
-- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-- if (!res)
-- continue;
-- if (bcm_enet_shared_base[i])
-- iounmap(bcm_enet_shared_base[i]);
-- if (requested[i])
-- release_mem_region(res->start, resource_size(res));
-- }
-- return ret;
-+ enetsw_writel(priv, reg, ENETSW_MDIOC_REG);
-+ udelay(50);
-+ spin_unlock_bh(&priv->enetsw_mdio_lock);
- }
-
--static int __devexit bcm_enet_shared_remove(struct platform_device *pdev)
-+/*
-+ * enet sw PHY polling
-+ */
-+static void swphy_poll_timer(unsigned long data)
- {
-- struct resource *res;
-- int i;
-+ struct bcm_enet_priv *priv = (struct bcm_enet_priv *)data;
-+ unsigned int i;
-
-- for (i = 0; i < 3; i++) {
-- iounmap(bcm_enet_shared_base[i]);
-- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-- release_mem_region(res->start, resource_size(res));
-+ for (i = 0; i < ARRAY_SIZE(priv->used_ports); i++) {
-+ struct bcm63xx_enetsw_port *port;
-+ int val, j, up, advertise, lpa, lpa2, speed, duplex, media;
-+ u8 override;
-+
-+ port = &priv->used_ports[i];
-+ if (!port->used)
-+ continue;
-+
-+ if (port->bypass_link)
-+ continue;
-+
-+ /* dummy read to clear */
-+ for (j = 0; j < 2; j++)
-+ val = bcmenet_sw_mdio_read(priv, port->external_phy,
-+ port->phy_id, MII_BMSR);
-+
-+ if (val == 0xffff)
-+ continue;
-+
-+ up = (val & BMSR_LSTATUS) ? 1 : 0;
-+ if (!(up ^ priv->sw_port_link[i]))
-+ continue;
-+
-+ priv->sw_port_link[i] = up;
-+
-+ /* link changed */
-+ if (!up) {
-+ dev_info(&priv->pdev->dev, "link DOWN on %s\n",
-+ port->name);
-+ enetsw_writeb(priv, ENETSW_PORTOV_ENABLE_MASK,
-+ ENETSW_PORTOV_REG(i));
-+ enetsw_writeb(priv, ENETSW_PTCTRL_RXDIS_MASK |
-+ ENETSW_PTCTRL_TXDIS_MASK,
-+ ENETSW_PTCTRL_REG(i));
-+ continue;
-+ }
-+
-+ advertise = bcmenet_sw_mdio_read(priv, port->external_phy,
-+ port->phy_id, MII_ADVERTISE);
-+
-+ lpa = bcmenet_sw_mdio_read(priv, port->external_phy,
-+ port->phy_id, MII_LPA);
-+
-+ lpa2 = bcmenet_sw_mdio_read(priv, port->external_phy,
-+ port->phy_id, MII_STAT1000);
-+
-+ /* figure out media and duplex from advertise and LPA values */
-+ media = mii_nway_result(lpa & advertise);
-+ duplex = (media & ADVERTISE_FULL) ? 1 : 0;
-+ if (lpa2 & LPA_1000FULL)
-+ duplex = 1;
-+
-+ if (lpa2 & (LPA_1000FULL | LPA_1000HALF))
-+ speed = 1000;
-+ else {
-+ if (media & (ADVERTISE_100FULL | ADVERTISE_100HALF))
-+ speed = 100;
-+ else
-+ speed = 10;
-+ }
-+
-+ dev_info(&priv->pdev->dev,
-+ "link UP on %s, %dMbps, %s-duplex\n",
-+ port->name, speed, duplex ? "full" : "half");
-+
-+ override = ENETSW_PORTOV_ENABLE_MASK |
-+ ENETSW_PORTOV_LINKUP_MASK;
-+
-+ if (speed == 1000)
-+ override |= ENETSW_IMPOV_1000_MASK;
-+ else if (speed == 100)
-+ override |= ENETSW_IMPOV_100_MASK;
-+ if (duplex)
-+ override |= ENETSW_IMPOV_FDX_MASK;
-+
-+ enetsw_writeb(priv, override, ENETSW_PORTOV_REG(i));
-+ enetsw_writeb(priv, 0, ENETSW_PTCTRL_REG(i));
- }
-- return 0;
--}
-
--/*
-- * this "shared" driver is needed because both macs share a single
-- * address space
-- */
--struct platform_driver bcm63xx_enet_shared_driver = {
-- .probe = bcm_enet_shared_probe,
-- .remove = __devexit_p(bcm_enet_shared_remove),
-- .driver = {
-- .name = "bcm63xx_enet_shared",
-- .owner = THIS_MODULE,
-- },
--};
-+ priv->swphy_poll.expires = jiffies + HZ;
-+ add_timer(&priv->swphy_poll);
-+}
-
- /*
-- * entry point
-+ * open callback, allocate dma rings & buffers and start rx operation
- */
--static int __init bcm_enet_init(void)
-+static int bcm_enetsw_open(struct net_device *dev)
- {
-- int ret;
-+ struct bcm_enet_priv *priv;
-+ struct device *kdev;
-+ int i, ret;
-+ unsigned int size;
-+ void *p;
-+ u32 val;
-
-- ret = platform_driver_register(&bcm63xx_enet_shared_driver);
-+ priv = netdev_priv(dev);
-+ kdev = &priv->pdev->dev;
-+
-+ /* mask all interrupts and request them */
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+
-+ ret = request_irq(priv->irq_rx, bcm_enet_isr_dma,
-+ IRQF_DISABLED, dev->name, dev);
- if (ret)
-- return ret;
-+ goto out_freeirq;
-
-- ret = platform_driver_register(&bcm63xx_enet_driver);
-+ ret = request_irq(priv->irq_tx, bcm_enet_isr_dma,
-+ IRQF_DISABLED, dev->name, dev);
- if (ret)
-- platform_driver_unregister(&bcm63xx_enet_shared_driver);
-+ goto out_freeirq_rx;
-+
-+ /* allocate rx dma ring */
-+ size = priv->rx_ring_size * sizeof(struct bcm_enet_desc);
-+ p = dma_alloc_coherent(kdev, size, &priv->rx_desc_dma, GFP_KERNEL);
-+ if (!p) {
-+ dev_err(kdev, "cannot allocate rx ring %u\n", size);
-+ ret = -ENOMEM;
-+ goto out_freeirq_tx;
-+ }
-+
-+ memset(p, 0, size);
-+ priv->rx_desc_alloc_size = size;
-+ priv->rx_desc_cpu = p;
-+
-+ /* allocate tx dma ring */
-+ size = priv->tx_ring_size * sizeof(struct bcm_enet_desc);
-+ p = dma_alloc_coherent(kdev, size, &priv->tx_desc_dma, GFP_KERNEL);
-+ if (!p) {
-+ dev_err(kdev, "cannot allocate tx ring\n");
-+ ret = -ENOMEM;
-+ goto out_free_rx_ring;
-+ }
-+
-+ memset(p, 0, size);
-+ priv->tx_desc_alloc_size = size;
-+ priv->tx_desc_cpu = p;
-+
-+ priv->tx_skb = kzalloc(sizeof(struct sk_buff *) * priv->tx_ring_size,
-+ GFP_KERNEL);
-+ if (!priv->tx_skb) {
-+ dev_err(kdev, "cannot allocate rx skb queue\n");
-+ ret = -ENOMEM;
-+ goto out_free_tx_ring;
-+ }
-+
-+ priv->tx_desc_count = priv->tx_ring_size;
-+ priv->tx_dirty_desc = 0;
-+ priv->tx_curr_desc = 0;
-+ spin_lock_init(&priv->tx_lock);
-+
-+ /* init & fill rx ring with skbs */
-+ priv->rx_skb = kzalloc(sizeof(struct sk_buff *) * priv->rx_ring_size,
-+ GFP_KERNEL);
-+ if (!priv->rx_skb) {
-+ dev_err(kdev, "cannot allocate rx skb queue\n");
-+ ret = -ENOMEM;
-+ goto out_free_tx_skb;
-+ }
-+
-+ priv->rx_desc_count = 0;
-+ priv->rx_dirty_desc = 0;
-+ priv->rx_curr_desc = 0;
-+
-+ /* disable all ports */
-+ for (i = 0; i < 6; i++) {
-+ enetsw_writeb(priv, ENETSW_PORTOV_ENABLE_MASK,
-+ ENETSW_PORTOV_REG(i));
-+ enetsw_writeb(priv, ENETSW_PTCTRL_RXDIS_MASK |
-+ ENETSW_PTCTRL_TXDIS_MASK,
-+ ENETSW_PTCTRL_REG(i));
-+ }
-+
-+ /* reset mib */
-+ val = enetsw_readb(priv, ENETSW_GMCR_REG);
-+ val |= ENETSW_GMCR_RST_MIB_MASK;
-+ enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+ mdelay(1);
-+ val &= ~ENETSW_GMCR_RST_MIB_MASK;
-+ enetsw_writeb(priv, val, ENETSW_GMCR_REG);
-+ mdelay(1);
-+
-+ /* force CPU port state */
-+ val = enetsw_readb(priv, ENETSW_IMPOV_REG);
-+ val |= ENETSW_IMPOV_FORCE_MASK | ENETSW_IMPOV_LINKUP_MASK;
-+ enetsw_writeb(priv, val, ENETSW_IMPOV_REG);
-+
-+ /* enable switch forward engine */
-+ val = enetsw_readb(priv, ENETSW_SWMODE_REG);
-+ val |= ENETSW_SWMODE_FWD_EN_MASK;
-+ enetsw_writeb(priv, val, ENETSW_SWMODE_REG);
-+
-+ /* enable jumbo on all ports */
-+ enetsw_writel(priv, 0x1ff, ENETSW_JMBCTL_PORT_REG);
-+ enetsw_writew(priv, 9728, ENETSW_JMBCTL_MAXSIZE_REG);
-+
-+ /* initialize flow control buffer allocation */
-+ enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-+ ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+
-+ if (bcm_enet_refill_rx(dev)) {
-+ dev_err(kdev, "cannot allocate rx skb queue\n");
-+ ret = -ENOMEM;
-+ goto out;
-+ }
-+
-+ /* write rx & tx ring addresses */
-+ enet_dmas_writel(priv, priv->rx_desc_dma,
-+ ENETDMAS_RSTART_REG(priv->rx_chan));
-+ enet_dmas_writel(priv, priv->tx_desc_dma,
-+ ENETDMAS_RSTART_REG(priv->tx_chan));
-+
-+ /* clear remaining state ram for rx & tx channel */
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->rx_chan));
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->tx_chan));
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->rx_chan));
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->tx_chan));
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->rx_chan));
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan));
-+
-+ /* set dma maximum burst len */
-+ enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+ ENETDMAC_MAXBURST_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+ ENETDMAC_MAXBURST_REG(priv->tx_chan));
-+
-+ /* set flow control low/high threshold to 1/3 / 2/3 */
-+ val = priv->rx_ring_size / 3;
-+ enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
-+ val = (priv->rx_ring_size * 2) / 3;
-+ enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
-+
-+ /* all set, enable mac and interrupts, start dma engine and
-+ * kick rx dma channel */
-+ wmb();
-+ enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
-+ enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
-+ ENETDMAC_CHANCFG_REG(priv->rx_chan));
-+
-+ /* watch "packet transferred" interrupt in rx and tx */
-+ enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+ ENETDMAC_IR_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+ ENETDMAC_IR_REG(priv->tx_chan));
-+
-+ /* make sure we enable napi before rx interrupt */
-+ napi_enable(&priv->napi);
-+
-+ enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+ ENETDMAC_IRMASK_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-+ ENETDMAC_IRMASK_REG(priv->tx_chan));
-+
-+ netif_carrier_on(dev);
-+ netif_start_queue(dev);
-+
-+ /*
-+ * apply override config for bypass_link ports here.
-+ */
-+ for (i = 0; i < ARRAY_SIZE(priv->used_ports); i++) {
-+ struct bcm63xx_enetsw_port *port;
-+ u8 override;
-+ port = &priv->used_ports[i];
-+ if (!port->used)
-+ continue;
-+
-+ if (!port->bypass_link)
-+ continue;
-+
-+ override = ENETSW_PORTOV_ENABLE_MASK |
-+ ENETSW_PORTOV_LINKUP_MASK;
-+
-+ switch (port->force_speed) {
-+ case 1000:
-+ override |= ENETSW_IMPOV_1000_MASK;
-+ break;
-+ case 100:
-+ override |= ENETSW_IMPOV_100_MASK;
-+ break;
-+ case 10:
-+ break;
-+ default:
-+ printk(KERN_WARNING "invalid forced speed on port %s: "
-+ "assume 10\n",
-+ port->name);
-+ break;
-+ }
-+
-+ if (port->force_duplex_full)
-+ override = ENETSW_IMPOV_FDX_MASK;
-+
-+
-+ enetsw_writeb(priv, override, ENETSW_PORTOV_REG(i));
-+ enetsw_writeb(priv, 0, ENETSW_PTCTRL_REG(i));
-+ }
-+
-+ /* start phy polling timer */
-+ init_timer(&priv->swphy_poll);
-+ priv->swphy_poll.function = swphy_poll_timer;
-+ priv->swphy_poll.data = (unsigned long)priv;
-+ priv->swphy_poll.expires = jiffies;
-+ add_timer(&priv->swphy_poll);
-+ return 0;
-+
-+out:
-+ for (i = 0; i < priv->rx_ring_size; i++) {
-+ struct bcm_enet_desc *desc;
-+
-+ if (!priv->rx_skb[i])
-+ continue;
-+
-+ desc = &priv->rx_desc_cpu[i];
-+ dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
-+ DMA_FROM_DEVICE);
-+ kfree_skb(priv->rx_skb[i]);
-+ }
-+ kfree(priv->rx_skb);
-+
-+out_free_tx_skb:
-+ kfree(priv->tx_skb);
-+
-+out_free_tx_ring:
-+ dma_free_coherent(kdev, priv->tx_desc_alloc_size,
-+ priv->tx_desc_cpu, priv->tx_desc_dma);
-+
-+out_free_rx_ring:
-+ dma_free_coherent(kdev, priv->rx_desc_alloc_size,
-+ priv->rx_desc_cpu, priv->rx_desc_dma);
-+
-+out_freeirq_tx:
-+ free_irq(priv->irq_tx, dev);
-+
-+out_freeirq_rx:
-+ free_irq(priv->irq_rx, dev);
-+
-+out_freeirq:
-+ return ret;
-+}
-+
-+/*
-+ * stop callback
-+ */
-+static int bcm_enetsw_stop(struct net_device *dev)
-+{
-+ struct bcm_enet_priv *priv;
-+ struct device *kdev;
-+ int i;
-+
-+ priv = netdev_priv(dev);
-+ kdev = &priv->pdev->dev;
-+
-+ del_timer_sync(&priv->swphy_poll);
-+ netif_stop_queue(dev);
-+ napi_disable(&priv->napi);
-+ del_timer_sync(&priv->rx_timeout);
-+
-+ /* mask all interrupts */
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+
-+ /* disable dma & mac */
-+ bcm_enet_disable_dma(priv, priv->tx_chan);
-+ bcm_enet_disable_dma(priv, priv->rx_chan);
-+
-+ /* force reclaim of all tx buffers */
-+ bcm_enet_tx_reclaim(dev, 1);
-+
-+ /* free the rx skb ring */
-+ for (i = 0; i < priv->rx_ring_size; i++) {
-+ struct bcm_enet_desc *desc;
-+
-+ if (!priv->rx_skb[i])
-+ continue;
-+
-+ desc = &priv->rx_desc_cpu[i];
-+ dma_unmap_single(kdev, desc->address, priv->rx_skb_size,
-+ DMA_FROM_DEVICE);
-+ kfree_skb(priv->rx_skb[i]);
-+ }
-+
-+ /* free remaining allocated memory */
-+ kfree(priv->rx_skb);
-+ kfree(priv->tx_skb);
-+ dma_free_coherent(kdev, priv->rx_desc_alloc_size,
-+ priv->rx_desc_cpu, priv->rx_desc_dma);
-+ dma_free_coherent(kdev, priv->tx_desc_alloc_size,
-+ priv->tx_desc_cpu, priv->tx_desc_dma);
-+ free_irq(priv->irq_tx, dev);
-+ free_irq(priv->irq_rx, dev);
-+
-+ return 0;
-+}
-+
-+/*
-+ * try to sort out phy external status by walking the used_port field
-+ * in the bcm_enet_priv structure. in case the phy address is not
-+ * assigned to any physical port on the switch, assume it is external
-+ * (and yell at the user).
-+ */
-+static int bcm_enetsw_phy_is_external(struct bcm_enet_priv *priv, int phy_id)
-+{
-+ int i;
-+
-+ for (i = 0; i < (int)ARRAY_SIZE(priv->used_ports); ++i) {
-+ if (!priv->used_ports[i].used)
-+ continue;
-+ if (priv->used_ports[i].phy_id == phy_id)
-+ return priv->used_ports[i].external_phy;
-+ }
-+
-+ printk_once(KERN_WARNING "bcm63xx_enet: could not find a used port "
-+ "with phy_id %i, assuming phy is external\n", phy_id);
-+ return 1;
-+}
-+
-+/*
-+ * can't use bcmenet_sw_mdio_read directly as we need to sort out
-+ * external/internal status of the given phy_id first.
-+ */
-+static int bcm_enetsw_mii_mdio_read(struct net_device *dev, int phy_id,
-+ int location)
-+{
-+ struct bcm_enet_priv *priv;
-+
-+ priv = netdev_priv(dev);
-+ return bcmenet_sw_mdio_read(priv,
-+ bcm_enetsw_phy_is_external(priv, phy_id),
-+ phy_id, location);
-+}
-+
-+/*
-+ * can't use bcmenet_sw_mdio_write directly as we need to sort out
-+ * external/internal status of the given phy_id first.
-+ */
-+static void bcm_enetsw_mii_mdio_write(struct net_device *dev, int phy_id,
-+ int location,
-+ int val)
-+{
-+ struct bcm_enet_priv *priv;
-+
-+ priv = netdev_priv(dev);
-+ bcmenet_sw_mdio_write(priv, bcm_enetsw_phy_is_external(priv, phy_id),
-+ phy_id, location, val);
-+}
-+
-+static int bcm_enetsw_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-+{
-+ struct mii_if_info mii;
-+
-+ mii.dev = dev;
-+ mii.mdio_read = bcm_enetsw_mii_mdio_read;
-+ mii.mdio_write = bcm_enetsw_mii_mdio_write;
-+ mii.phy_id = 0;
-+ mii.phy_id_mask = 0x3f;
-+ mii.reg_num_mask = 0x1f;
-+ return generic_mii_ioctl(&mii, if_mii(rq), cmd, NULL);
-+
-+}
-+
-+static const struct net_device_ops bcm_enetsw_ops = {
-+ .ndo_open = bcm_enetsw_open,
-+ .ndo_stop = bcm_enetsw_stop,
-+ .ndo_start_xmit = bcm_enet_start_xmit,
-+ .ndo_change_mtu = bcm_enet_change_mtu,
-+ .ndo_do_ioctl = bcm_enetsw_ioctl,
-+};
-+
-+
-+static const struct bcm_enet_stats bcm_enetsw_gstrings_stats[] = {
-+ { "rx_packets", DEV_STAT(rx_packets), -1 },
-+ { "tx_packets", DEV_STAT(tx_packets), -1 },
-+ { "rx_bytes", DEV_STAT(rx_bytes), -1 },
-+ { "tx_bytes", DEV_STAT(tx_bytes), -1 },
-+ { "rx_errors", DEV_STAT(rx_errors), -1 },
-+ { "tx_errors", DEV_STAT(tx_errors), -1 },
-+ { "rx_dropped", DEV_STAT(rx_dropped), -1 },
-+ { "tx_dropped", DEV_STAT(tx_dropped), -1 },
-+
-+ { "tx_good_octets", GEN_STAT(mib.tx_gd_octets), ETHSW_MIB_RX_GD_OCT },
-+ { "tx_unicast", GEN_STAT(mib.tx_unicast), ETHSW_MIB_RX_BRDCAST },
-+ { "tx_broadcast", GEN_STAT(mib.tx_brdcast), ETHSW_MIB_RX_BRDCAST },
-+ { "tx_multicast", GEN_STAT(mib.tx_mult), ETHSW_MIB_RX_MULT },
-+ { "tx_64_octets", GEN_STAT(mib.tx_64), ETHSW_MIB_RX_64 },
-+ { "tx_65_127_oct", GEN_STAT(mib.tx_65_127), ETHSW_MIB_RX_65_127 },
-+ { "tx_128_255_oct", GEN_STAT(mib.tx_128_255), ETHSW_MIB_RX_128_255 },
-+ { "tx_256_511_oct", GEN_STAT(mib.tx_256_511), ETHSW_MIB_RX_256_511 },
-+ { "tx_512_1023_oct", GEN_STAT(mib.tx_512_1023), ETHSW_MIB_RX_512_1023},
-+ { "tx_1024_1522_oct", GEN_STAT(mib.tx_1024_max),
-+ ETHSW_MIB_RX_1024_1522 },
-+ { "tx_1523_2047_oct", GEN_STAT(mib.tx_1523_2047),
-+ ETHSW_MIB_RX_1523_2047 },
-+ { "tx_2048_4095_oct", GEN_STAT(mib.tx_2048_4095),
-+ ETHSW_MIB_RX_2048_4095 },
-+ { "tx_4096_8191_oct", GEN_STAT(mib.tx_4096_8191),
-+ ETHSW_MIB_RX_4096_8191 },
-+ { "tx_8192_9728_oct", GEN_STAT(mib.tx_8192_9728),
-+ ETHSW_MIB_RX_8192_9728 },
-+ { "tx_oversize", GEN_STAT(mib.tx_ovr), ETHSW_MIB_RX_OVR },
-+ { "tx_oversize_drop", GEN_STAT(mib.tx_ovr), ETHSW_MIB_RX_OVR_DISC },
-+ { "tx_dropped", GEN_STAT(mib.tx_drop), ETHSW_MIB_RX_DROP },
-+ { "tx_undersize", GEN_STAT(mib.tx_underrun), ETHSW_MIB_RX_UND },
-+ { "tx_pause", GEN_STAT(mib.tx_pause), ETHSW_MIB_RX_PAUSE },
-+
-+ { "rx_good_octets", GEN_STAT(mib.rx_gd_octets), ETHSW_MIB_TX_ALL_OCT },
-+ { "rx_broadcast", GEN_STAT(mib.rx_brdcast), ETHSW_MIB_TX_BRDCAST },
-+ { "rx_multicast", GEN_STAT(mib.rx_mult), ETHSW_MIB_TX_MULT },
-+ { "rx_unicast", GEN_STAT(mib.rx_unicast), ETHSW_MIB_TX_MULT },
-+ { "rx_pause", GEN_STAT(mib.rx_pause), ETHSW_MIB_TX_PAUSE },
-+ { "rx_dropped", GEN_STAT(mib.rx_drop), ETHSW_MIB_TX_DROP_PKTS },
-+
-+};
-+
-+#define BCM_ENETSW_STATS_LEN \
-+ (sizeof(bcm_enetsw_gstrings_stats) / sizeof(struct bcm_enet_stats))
-+
-+static void bcm_enetsw_get_strings(struct net_device *netdev,
-+ u32 stringset, u8 *data)
-+{
-+ int i;
-+
-+ switch (stringset) {
-+ case ETH_SS_STATS:
-+ for (i = 0; i < BCM_ENETSW_STATS_LEN; i++) {
-+ memcpy(data + i * ETH_GSTRING_LEN,
-+ bcm_enetsw_gstrings_stats[i].stat_string,
-+ ETH_GSTRING_LEN);
-+ }
-+ break;
-+ }
-+}
-+
-+static int bcm_enetsw_get_sset_count(struct net_device *netdev,
-+ int string_set)
-+{
-+ switch (string_set) {
-+ case ETH_SS_STATS:
-+ return BCM_ENETSW_STATS_LEN;
-+ default:
-+ return -EINVAL;
-+ }
-+}
-+
-+static void bcm_enetsw_get_drvinfo(struct net_device *netdev,
-+ struct ethtool_drvinfo *drvinfo)
-+{
-+ strncpy(drvinfo->driver, bcm_enet_driver_name, 32);
-+ strncpy(drvinfo->version, bcm_enet_driver_version, 32);
-+ strncpy(drvinfo->fw_version, "N/A", 32);
-+ strncpy(drvinfo->bus_info, "bcm63xx", 32);
-+ drvinfo->n_stats = BCM_ENETSW_STATS_LEN;
-+}
-+
-+static void bcm_enetsw_get_ethtool_stats(struct net_device *netdev,
-+ struct ethtool_stats *stats,
-+ u64 *data)
-+{
-+ struct bcm_enet_priv *priv;
-+ int i;
-+
-+ priv = netdev_priv(netdev);
-+
-+ for (i = 0; i < BCM_ENETSW_STATS_LEN; i++) {
-+ const struct bcm_enet_stats *s;
-+ u32 lo, hi;
-+ char *p;
-+ int reg;
-+
-+ s = &bcm_enetsw_gstrings_stats[i];
-+
-+ reg = s->mib_reg;
-+ if (reg == -1)
-+ continue;
-+
-+ lo = enetsw_readl(priv, ENETSW_MIB_REG(reg));
-+ p = (char *)priv + s->stat_offset;
-+
-+ if (s->sizeof_stat == sizeof(u64)) {
-+ hi = enetsw_readl(priv, ENETSW_MIB_REG(reg + 1));
-+ *(u64 *)p = ((u64)hi << 32 | lo);
-+ } else
-+ *(u32 *)p = lo;
-+ }
-+
-+ for (i = 0; i < BCM_ENETSW_STATS_LEN; i++) {
-+ const struct bcm_enet_stats *s;
-+ char *p;
-+
-+ s = &bcm_enetsw_gstrings_stats[i];
-+
-+ if (s->mib_reg == -1)
-+ p = (char *)&netdev->stats + s->stat_offset;
-+ else
-+ p = (char *)priv + s->stat_offset;
-+
-+ data[i] = (s->sizeof_stat == sizeof(u64)) ?
-+ *(u64 *)p : *(u32 *)p;
-+ }
-+}
-+
-+static void bcm_enetsw_get_ringparam(struct net_device *dev,
-+ struct ethtool_ringparam *ering)
-+{
-+ struct bcm_enet_priv *priv;
-+
-+ priv = netdev_priv(dev);
-+
-+ /* rx/tx ring is actually only limited by memory */
-+ ering->rx_max_pending = 8192;
-+ ering->tx_max_pending = 8192;
-+ ering->rx_mini_max_pending = 0;
-+ ering->rx_jumbo_max_pending = 0;
-+ ering->rx_pending = priv->rx_ring_size;
-+ ering->tx_pending = priv->tx_ring_size;
-+}
-+
-+static int bcm_enetsw_set_ringparam(struct net_device *dev,
-+ struct ethtool_ringparam *ering)
-+{
-+ struct bcm_enet_priv *priv;
-+ int was_running;
-+
-+ priv = netdev_priv(dev);
-+
-+ was_running = 0;
-+ if (netif_running(dev)) {
-+ bcm_enetsw_stop(dev);
-+ was_running = 1;
-+ }
-+
-+ priv->rx_ring_size = ering->rx_pending;
-+ priv->tx_ring_size = ering->tx_pending;
-+
-+ if (was_running) {
-+ int err;
-+
-+ err = bcm_enetsw_open(dev);
-+ if (err)
-+ dev_close(dev);
-+ }
-+ return 0;
-+}
-+
-+static struct ethtool_ops bcm_enetsw_ethtool_ops = {
-+ .get_strings = bcm_enetsw_get_strings,
-+ .get_sset_count = bcm_enetsw_get_sset_count,
-+ .get_ethtool_stats = bcm_enetsw_get_ethtool_stats,
-+ .get_drvinfo = bcm_enetsw_get_drvinfo,
-+ .get_ringparam = bcm_enetsw_get_ringparam,
-+ .set_ringparam = bcm_enetsw_set_ringparam,
-+};
-+
-+/*
-+ * allocate netdevice, request register memory and register device.
-+ */
-+static int __devinit bcm_enetsw_probe(struct platform_device *pdev)
-+{
-+ struct bcm_enet_priv *priv;
-+ struct net_device *dev;
-+ struct bcm63xx_enetsw_platform_data *pd;
-+ struct resource *res_mem;
-+ int ret, irq_rx, irq_tx;
-+
-+ /* stop if shared driver failed, assume driver->probe will be
-+ * called in the same order we register devices (correct ?) */
-+ if (!bcm_enet_shared_base[0])
-+ return -ENODEV;
-+
-+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ irq_rx = platform_get_irq(pdev, 0);
-+ irq_tx = platform_get_irq(pdev, 1);
-+ if (!res_mem || irq_rx < 0 || irq_tx < 0)
-+ return -ENODEV;
-+
-+ ret = 0;
-+ dev = alloc_etherdev(sizeof(*priv));
-+ if (!dev)
-+ return -ENOMEM;
-+ priv = netdev_priv(dev);
-+ memset(priv, 0, sizeof(*priv));
-+
-+ /* initialize default and fetch platform data */
-+ priv->irq_rx = irq_rx;
-+ priv->irq_tx = irq_tx;
-+ priv->rx_ring_size = BCMENET_DEF_RX_DESC;
-+ priv->tx_ring_size = BCMENET_DEF_TX_DESC;
-+
-+ pd = pdev->dev.platform_data;
-+ if (pd) {
-+ memcpy(dev->dev_addr, pd->mac_addr, ETH_ALEN);
-+ memcpy(priv->used_ports, pd->used_ports,
-+ sizeof (pd->used_ports));
-+ }
-+
-+ ret = compute_hw_mtu(priv, dev->mtu);
-+ if (ret)
-+ goto out;
-+
-+ if (!request_mem_region(res_mem->start, resource_size(res_mem),
-+ "bcm63xx_enetsw")) {
-+ ret = -EBUSY;
-+ goto out;
-+ }
-+
-+ priv->base = ioremap(res_mem->start, resource_size(res_mem));
-+ if (priv->base == NULL) {
-+ ret = -ENOMEM;
-+ goto out_release_mem;
-+ }
-+
-+ priv->mac_clk = clk_get(&pdev->dev, "enetsw");
-+ if (IS_ERR(priv->mac_clk)) {
-+ ret = PTR_ERR(priv->mac_clk);
-+ goto out_unmap;
-+ }
-+ clk_enable(priv->mac_clk);
-+
-+ priv->rx_chan = 0;
-+ priv->tx_chan = 1;
-+ spin_lock_init(&priv->rx_lock);
-+
-+ /* init rx timeout (used for oom) */
-+ init_timer(&priv->rx_timeout);
-+ priv->rx_timeout.function = bcm_enet_refill_rx_timer;
-+ priv->rx_timeout.data = (unsigned long)dev;
-+
-+ /* register netdevice */
-+ dev->netdev_ops = &bcm_enetsw_ops;
-+ netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16);
-+ SET_ETHTOOL_OPS(dev, &bcm_enetsw_ethtool_ops);
-+ SET_NETDEV_DEV(dev, &pdev->dev);
-+
-+ spin_lock_init(&priv->enetsw_mdio_lock);
-+
-+ ret = register_netdev(dev);
-+ if (ret)
-+ goto out_put_clk;
-+
-+ netif_carrier_off(dev);
-+ platform_set_drvdata(pdev, dev);
-+ priv->pdev = pdev;
-+ priv->net_dev = dev;
-+
-+ return 0;
-+
-+out_put_clk:
-+ clk_put(priv->mac_clk);
-+
-+out_unmap:
-+ iounmap(priv->base);
-+
-+out_release_mem:
-+ release_mem_region(res_mem->start, resource_size(res_mem));
-+out:
-+ free_netdev(dev);
-+ return ret;
-+}
-+
-+
-+/*
-+ * exit func, stops hardware and unregisters netdevice
-+ */
-+static int __devexit bcm_enetsw_remove(struct platform_device *pdev)
-+{
-+ struct bcm_enet_priv *priv;
-+ struct net_device *dev;
-+ struct resource *res;
-+
-+ /* stop netdevice */
-+ dev = platform_get_drvdata(pdev);
-+ priv = netdev_priv(dev);
-+ unregister_netdev(dev);
-+
-+ /* release device resources */
-+ iounmap(priv->base);
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ release_mem_region(res->start, resource_size(res));
-+
-+ platform_set_drvdata(pdev, NULL);
-+ free_netdev(dev);
-+ return 0;
-+}
-+
-+struct platform_driver bcm63xx_enetsw_driver = {
-+ .probe = bcm_enetsw_probe,
-+ .remove = __devexit_p(bcm_enetsw_remove),
-+ .driver = {
-+ .name = "bcm63xx_enetsw",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+/*
-+ * reserve & remap memory space shared between all macs
-+ */
-+static int __devinit bcm_enet_shared_probe(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ int ret, i, requested[3];
-+
-+ memset(bcm_enet_shared_base, 0, sizeof (bcm_enet_shared_base));
-+ memset(requested, 0, sizeof (requested));
-+
-+ for (i = 0; i < 3; i++) {
-+ void __iomem *p;
-+
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res) {
-+ ret = -EINVAL;
-+ goto fail;
-+ }
-+
-+ if (!request_mem_region(res->start, resource_size(res),
-+ "bcm63xx_enet_dma")) {
-+ ret = -EBUSY;
-+ goto fail;
-+ }
-+ requested[i] = 0;
-+
-+ p = ioremap(res->start, resource_size(res));
-+ if (!p) {
-+ ret = -ENOMEM;
-+ goto fail;
-+ }
-+
-+ bcm_enet_shared_base[i] = p;
-+ }
-+
-+ return 0;
-+
-+fail:
-+ for (i = 0; i < 3; i++) {
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ if (!res)
-+ continue;
-+ if (bcm_enet_shared_base[i])
-+ iounmap(bcm_enet_shared_base[i]);
-+ if (requested[i])
-+ release_mem_region(res->start, resource_size(res));
-+ }
-+ return ret;
-+}
-+
-+static int __devexit bcm_enet_shared_remove(struct platform_device *pdev)
-+{
-+ struct resource *res;
-+ int i;
-+
-+ for (i = 0; i < 3; i++) {
-+ iounmap(bcm_enet_shared_base[i]);
-+ res = platform_get_resource(pdev, IORESOURCE_MEM, i);
-+ release_mem_region(res->start, resource_size(res));
-+ }
-+ return 0;
-+}
-+
-+/*
-+ * this "shared" driver is needed because both macs share a single
-+ * address space
-+ */
-+struct platform_driver bcm63xx_enet_shared_driver = {
-+ .probe = bcm_enet_shared_probe,
-+ .remove = __devexit_p(bcm_enet_shared_remove),
-+ .driver = {
-+ .name = "bcm63xx_enet_shared",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+/*
-+ * entry point
-+ */
-+static int __init bcm_enet_init(void)
-+{
-+ int ret;
-+
-+ ret = platform_driver_register(&bcm63xx_enet_shared_driver);
-+ if (ret)
-+ return ret;
-+
-+ ret = platform_driver_register(&bcm63xx_enet_driver);
-+ if (ret)
-+ platform_driver_unregister(&bcm63xx_enet_shared_driver);
-+
-+ ret = platform_driver_register(&bcm63xx_enetsw_driver);
-+ if (ret) {
-+ platform_driver_unregister(&bcm63xx_enet_driver);
-+ platform_driver_unregister(&bcm63xx_enet_shared_driver);
-+ }
-
- return ret;
- }
-@@ -2018,6 +2937,7 @@ static int __init bcm_enet_init(void)
- static void __exit bcm_enet_exit(void)
- {
- platform_driver_unregister(&bcm63xx_enet_driver);
-+ platform_driver_unregister(&bcm63xx_enetsw_driver);
- platform_driver_unregister(&bcm63xx_enet_shared_driver);
- }
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -112,11 +112,60 @@ struct bcm_enet_desc {
- #define ETH_MIB_RX_CNTRL 54
-
-
-+/*
-+ * SW MIB Counters register definitions
-+*/
-+#define ETHSW_MIB_TX_ALL_OCT 0
-+#define ETHSW_MIB_TX_DROP_PKTS 2
-+#define ETHSW_MIB_TX_QOS_PKTS 3
-+#define ETHSW_MIB_TX_BRDCAST 4
-+#define ETHSW_MIB_TX_MULT 5
-+#define ETHSW_MIB_TX_UNI 6
-+#define ETHSW_MIB_TX_COL 7
-+#define ETHSW_MIB_TX_1_COL 8
-+#define ETHSW_MIB_TX_M_COL 9
-+#define ETHSW_MIB_TX_DEF 10
-+#define ETHSW_MIB_TX_LATE 11
-+#define ETHSW_MIB_TX_EX_COL 12
-+#define ETHSW_MIB_TX_PAUSE 14
-+#define ETHSW_MIB_TX_QOS_OCT 15
-+
-+#define ETHSW_MIB_RX_ALL_OCT 17
-+#define ETHSW_MIB_RX_UND 19
-+#define ETHSW_MIB_RX_PAUSE 20
-+#define ETHSW_MIB_RX_64 21
-+#define ETHSW_MIB_RX_65_127 22
-+#define ETHSW_MIB_RX_128_255 23
-+#define ETHSW_MIB_RX_256_511 24
-+#define ETHSW_MIB_RX_512_1023 25
-+#define ETHSW_MIB_RX_1024_1522 26
-+#define ETHSW_MIB_RX_OVR 27
-+#define ETHSW_MIB_RX_JAB 28
-+#define ETHSW_MIB_RX_ALIGN 29
-+#define ETHSW_MIB_RX_CRC 30
-+#define ETHSW_MIB_RX_GD_OCT 31
-+#define ETHSW_MIB_RX_DROP 33
-+#define ETHSW_MIB_RX_UNI 34
-+#define ETHSW_MIB_RX_MULT 35
-+#define ETHSW_MIB_RX_BRDCAST 36
-+#define ETHSW_MIB_RX_SA_CHANGE 37
-+#define ETHSW_MIB_RX_FRAG 38
-+#define ETHSW_MIB_RX_OVR_DISC 39
-+#define ETHSW_MIB_RX_SYM 40
-+#define ETHSW_MIB_RX_QOS_PKTS 41
-+#define ETHSW_MIB_RX_QOS_OCT 42
-+#define ETHSW_MIB_RX_1523_2047 44
-+#define ETHSW_MIB_RX_2048_4095 45
-+#define ETHSW_MIB_RX_4096_8191 46
-+#define ETHSW_MIB_RX_8192_9728 47
-+
-+
- struct bcm_enet_mib_counters {
- u64 tx_gd_octets;
- u32 tx_gd_pkts;
- u32 tx_all_octets;
- u32 tx_all_pkts;
-+ u32 tx_unicast;
- u32 tx_brdcast;
- u32 tx_mult;
- u32 tx_64;
-@@ -125,7 +174,12 @@ struct bcm_enet_mib_counters {
- u32 tx_256_511;
- u32 tx_512_1023;
- u32 tx_1024_max;
-+ u32 tx_1523_2047;
-+ u32 tx_2048_4095;
-+ u32 tx_4096_8191;
-+ u32 tx_8192_9728;
- u32 tx_jab;
-+ u32 tx_drop;
- u32 tx_ovr;
- u32 tx_frag;
- u32 tx_underrun;
-@@ -142,6 +196,7 @@ struct bcm_enet_mib_counters {
- u32 rx_all_octets;
- u32 rx_all_pkts;
- u32 rx_brdcast;
-+ u32 rx_unicast;
- u32 rx_mult;
- u32 rx_64;
- u32 rx_65_127;
-@@ -297,6 +352,22 @@ struct bcm_enet_priv {
-
- /* maximum hardware transmit/receive size */
- unsigned int hw_mtu;
-+
-+ /* port mapping for switch devices */
-+ struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-+ int sw_port_link[ENETSW_MAX_PORT];
-+
-+ /* used to poll switch port state */
-+ struct timer_list swphy_poll;
-+ spinlock_t enetsw_mdio_lock;
- };
-
-+static inline int bcm_enet_is_sw(struct bcm_enet_priv *priv)
-+{
-+ if (BCMCPU_IS_6368())
-+ return 1;
-+ else
-+ return 0;
-+}
-+
- #endif /* ! BCM63XX_ENET_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/416-bcm63xx_enet-reset-port-link-state-in-bcm_enetsw_ope.patch b/target/linux/brcm63xx/patches-3.3/416-bcm63xx_enet-reset-port-link-state-in-bcm_enetsw_ope.patch
deleted file mode 100644
index 6d8e5a72db..0000000000
--- a/target/linux/brcm63xx/patches-3.3/416-bcm63xx_enet-reset-port-link-state-in-bcm_enetsw_ope.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From 6d5c5bb13db3fd8e3dd0b82742b3957f41a4a3ac Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 24 May 2012 20:38:58 +0200
-Subject: [PATCH] bcm63xx_enet: reset port link state in bcm_enetsw_open
-
-bcm_enetsw_open disables all ports, but does not reset their link state.
-This results in connected ports staying disabled after a ifdown/ifup
-cycle, since bcm_enetsw_phy_poll only enables them if their current state
-is different from the stored link state.
-
-Fix this by also resetting the port link state.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2213,6 +2213,8 @@ static int bcm_enetsw_open(struct net_de
- enetsw_writeb(priv, ENETSW_PTCTRL_RXDIS_MASK |
- ENETSW_PTCTRL_TXDIS_MASK,
- ENETSW_PTCTRL_REG(i));
-+
-+ priv->sw_port_link[i] = 0;
- }
-
- /* reset mib */
diff --git a/target/linux/brcm63xx/patches-3.3/417-bcm63xx_enet-don-t-overwrite-settings-when-setting-d.patch b/target/linux/brcm63xx/patches-3.3/417-bcm63xx_enet-don-t-overwrite-settings-when-setting-d.patch
deleted file mode 100644
index 407c8169ec..0000000000
--- a/target/linux/brcm63xx/patches-3.3/417-bcm63xx_enet-don-t-overwrite-settings-when-setting-d.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From e79bc74f76361020d820ed4611d28f70ebd845ca Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 10 Jul 2012 10:44:09 +0200
-Subject: [PATCH 34/84] bcm63xx_enet: don't overwrite settings when setting duplex on force
-
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2333,7 +2333,7 @@ static int bcm_enetsw_open(struct net_de
- }
-
- if (port->force_duplex_full)
-- override = ENETSW_IMPOV_FDX_MASK;
-+ override |= ENETSW_IMPOV_FDX_MASK;
-
-
- enetsw_writeb(priv, override, ENETSW_PORTOV_REG(i));
diff --git a/target/linux/brcm63xx/patches-3.3/418-bcm63xx_enet-store-the-number-of-ports-instead-of-ha.patch b/target/linux/brcm63xx/patches-3.3/418-bcm63xx_enet-store-the-number-of-ports-instead-of-ha.patch
deleted file mode 100644
index 232668b7c9..0000000000
--- a/target/linux/brcm63xx/patches-3.3/418-bcm63xx_enet-store-the-number-of-ports-instead-of-ha.patch
+++ /dev/null
@@ -1,98 +0,0 @@
-From efe31ec8fca92162fc21630611971345014a81a0 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 10 Jul 2012 10:39:30 +0200
-Subject: [PATCH 33/84] bcm63xx_enet: store the number of ports instead of hardcoding them
-
-This will be needed for devices with a different number of ports
----
- arch/mips/bcm63xx/dev-enet.c | 2 ++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 2 ++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 9 +++++----
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 1 +
- 4 files changed, 10 insertions(+), 4 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -239,6 +239,8 @@ bcm63xx_enetsw_register(const struct bcm
-
- memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof (*pd));
-
-+ enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+
- ret = platform_device_register(&bcm63xx_enetsw_device);
- if (ret)
- return ret;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -43,6 +43,7 @@ struct bcm63xx_enet_platform_data {
- * on board ethernet switch platform data
- */
- #define ENETSW_MAX_PORT 6
-+#define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-
- struct bcm63xx_enetsw_port {
- int used;
-@@ -58,6 +59,7 @@ struct bcm63xx_enetsw_port {
-
- struct bcm63xx_enetsw_platform_data {
- char mac_addr[ETH_ALEN];
-+ int num_ports;
- struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
- };
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2041,7 +2041,7 @@ static void swphy_poll_timer(unsigned lo
- struct bcm_enet_priv *priv = (struct bcm_enet_priv *)data;
- unsigned int i;
-
-- for (i = 0; i < ARRAY_SIZE(priv->used_ports); i++) {
-+ for (i = 0; i < priv->num_ports; i++) {
- struct bcm63xx_enetsw_port *port;
- int val, j, up, advertise, lpa, lpa2, speed, duplex, media;
- u8 override;
-@@ -2207,7 +2207,7 @@ static int bcm_enetsw_open(struct net_de
- priv->rx_curr_desc = 0;
-
- /* disable all ports */
-- for (i = 0; i < 6; i++) {
-+ for (i = 0; i < priv->num_ports; i++) {
- enetsw_writeb(priv, ENETSW_PORTOV_ENABLE_MASK,
- ENETSW_PORTOV_REG(i));
- enetsw_writeb(priv, ENETSW_PTCTRL_RXDIS_MASK |
-@@ -2303,7 +2303,7 @@ static int bcm_enetsw_open(struct net_de
- /*
- * apply override config for bypass_link ports here.
- */
-- for (i = 0; i < ARRAY_SIZE(priv->used_ports); i++) {
-+ for (i = 0; i < priv->num_ports; i++) {
- struct bcm63xx_enetsw_port *port;
- u8 override;
- port = &priv->used_ports[i];
-@@ -2447,7 +2447,7 @@ static int bcm_enetsw_phy_is_external(st
- {
- int i;
-
-- for (i = 0; i < (int)ARRAY_SIZE(priv->used_ports); ++i) {
-+ for (i = 0; i < priv->num_ports; ++i) {
- if (!priv->used_ports[i].used)
- continue;
- if (priv->used_ports[i].phy_id == phy_id)
-@@ -2735,6 +2735,7 @@ static int __devinit bcm_enetsw_probe(st
- memcpy(dev->dev_addr, pd->mac_addr, ETH_ALEN);
- memcpy(priv->used_ports, pd->used_ports,
- sizeof (pd->used_ports));
-+ priv->num_ports = pd->num_ports;
- }
-
- ret = compute_hw_mtu(priv, dev->mtu);
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -354,6 +354,7 @@ struct bcm_enet_priv {
- unsigned int hw_mtu;
-
- /* port mapping for switch devices */
-+ int num_ports;
- struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
- int sw_port_link[ENETSW_MAX_PORT];
-
diff --git a/target/linux/brcm63xx/patches-3.3/419-bcm63xx_enet-store-is_sw-in-a-variable-instead-of-ch.patch b/target/linux/brcm63xx/patches-3.3/419-bcm63xx_enet-store-is_sw-in-a-variable-instead-of-ch.patch
deleted file mode 100644
index 6f73477ab3..0000000000
--- a/target/linux/brcm63xx/patches-3.3/419-bcm63xx_enet-store-is_sw-in-a-variable-instead-of-ch.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From ef581388c45dbc48f7bbe050e87deb1e3c63a698 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 10 Jul 2012 10:52:02 +0200
-Subject: [PATCH 35/84] bcm63xx_enet: store is_sw in a variable instead of checking the cpuid
-
-Reduces the number of changes needed for making enetsw work on new
-chips.
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 7 +++++--
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 10 ++--------
- 2 files changed, 7 insertions(+), 10 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -364,7 +364,7 @@ static int bcm_enet_receive_queue(struct
- }
-
- /* recycle packet if it's marked as bad */
-- if (!bcm_enet_is_sw(priv) &&
-+ if (!priv->enet_is_sw &&
- unlikely(len_stat & DMADESC_ERR_MASK)) {
- dev->stats.rx_errors++;
-
-@@ -597,7 +597,7 @@ static int bcm_enet_start_xmit(struct sk
- }
-
- /* pad small packets sent on a switch device */
-- if (bcm_enet_is_sw(priv) && skb->len < 64) {
-+ if (priv->enet_is_sw && skb->len < 64) {
- int needed = 64 - skb->len;
- char *data;
-
-@@ -1700,6 +1700,8 @@ static int __devinit bcm_enet_probe(stru
- return -ENOMEM;
- priv = netdev_priv(dev);
-
-+ priv->enet_is_sw = false;
-+
- ret = compute_hw_mtu(priv, dev->mtu);
- if (ret)
- goto out;
-@@ -2725,6 +2727,7 @@ static int __devinit bcm_enetsw_probe(st
- memset(priv, 0, sizeof(*priv));
-
- /* initialize default and fetch platform data */
-+ priv->enet_is_sw = true;
- priv->irq_rx = irq_rx;
- priv->irq_tx = irq_tx;
- priv->rx_ring_size = BCMENET_DEF_RX_DESC;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -353,6 +353,8 @@ struct bcm_enet_priv {
- /* maximum hardware transmit/receive size */
- unsigned int hw_mtu;
-
-+ bool enet_is_sw;
-+
- /* port mapping for switch devices */
- int num_ports;
- struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-@@ -363,12 +365,4 @@ struct bcm_enet_priv {
- spinlock_t enetsw_mdio_lock;
- };
-
--static inline int bcm_enet_is_sw(struct bcm_enet_priv *priv)
--{
-- if (BCMCPU_IS_6368())
-- return 1;
-- else
-- return 0;
--}
--
- #endif /* ! BCM63XX_ENET_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/420-BCM63XX-allow-enetsw-without-tx-irq.patch b/target/linux/brcm63xx/patches-3.3/420-BCM63XX-allow-enetsw-without-tx-irq.patch
deleted file mode 100644
index 6396b626df..0000000000
--- a/target/linux/brcm63xx/patches-3.3/420-BCM63XX-allow-enetsw-without-tx-irq.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 625894c377ba266c0044675b53f05d65db6355b6 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 8 Jul 2012 13:07:52 +0200
-Subject: [PATCH 38/84] BCM63XX: allow enetsw without tx irq
-
----
- arch/mips/bcm63xx/dev-enet.c | 2 ++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 18 +++++++++++-------
- 2 files changed, 13 insertions(+), 7 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -236,6 +236,8 @@ bcm63xx_enetsw_register(const struct bcm
- enetsw_res[0].end += RSET_ENETSW_SIZE - 1;
- enetsw_res[1].start = bcm63xx_get_irq_number(IRQ_ENETSW_RXDMA0);
- enetsw_res[2].start = bcm63xx_get_irq_number(IRQ_ENETSW_TXDMA0);
-+ if (!enetsw_res[2].start)
-+ enetsw_res[2].start = -1;
-
- memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof (*pd));
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2151,10 +2151,12 @@ static int bcm_enetsw_open(struct net_de
- if (ret)
- goto out_freeirq;
-
-- ret = request_irq(priv->irq_tx, bcm_enet_isr_dma,
-- IRQF_DISABLED, dev->name, dev);
-- if (ret)
-- goto out_freeirq_rx;
-+ if (priv->irq_tx != -1) {
-+ ret = request_irq(priv->irq_tx, bcm_enet_isr_dma,
-+ IRQF_DISABLED, dev->name, dev);
-+ if (ret)
-+ goto out_freeirq_rx;
-+ }
-
- /* allocate rx dma ring */
- size = priv->rx_ring_size * sizeof(struct bcm_enet_desc);
-@@ -2376,7 +2378,8 @@ out_free_rx_ring:
- priv->rx_desc_cpu, priv->rx_desc_dma);
-
- out_freeirq_tx:
-- free_irq(priv->irq_tx, dev);
-+ if (priv->irq_tx != -1)
-+ free_irq(priv->irq_tx, dev);
-
- out_freeirq_rx:
- free_irq(priv->irq_rx, dev);
-@@ -2433,7 +2436,8 @@ static int bcm_enetsw_stop(struct net_de
- priv->rx_desc_cpu, priv->rx_desc_dma);
- dma_free_coherent(kdev, priv->tx_desc_alloc_size,
- priv->tx_desc_cpu, priv->tx_desc_dma);
-- free_irq(priv->irq_tx, dev);
-+ if (priv->irq_tx != -1)
-+ free_irq(priv->irq_tx, dev);
- free_irq(priv->irq_rx, dev);
-
- return 0;
-@@ -2716,7 +2720,7 @@ static int __devinit bcm_enetsw_probe(st
- res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- irq_rx = platform_get_irq(pdev, 0);
- irq_tx = platform_get_irq(pdev, 1);
-- if (!res_mem || irq_rx < 0 || irq_tx < 0)
-+ if (!res_mem || irq_rx < 0)
- return -ENODEV;
-
- ret = 0;
diff --git a/target/linux/brcm63xx/patches-3.3/421-BCM63XX-use-port-id-for-deciding-external-phy.patch b/target/linux/brcm63xx/patches-3.3/421-BCM63XX-use-port-id-for-deciding-external-phy.patch
deleted file mode 100644
index da7013d8ff..0000000000
--- a/target/linux/brcm63xx/patches-3.3/421-BCM63XX-use-port-id-for-deciding-external-phy.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 85e4551e033df7cb043e93042661fc1e58799efa Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 8 Jul 2012 15:36:23 +0200
-Subject: [PATCH 52/84] BCM63XX: use port id for deciding external phy
-
-Ports 0-3 always use the internal phy, while 4+ always need an external
-phy to work.
----
- .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 3 ++-
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 15 ++++++++-------
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 5 +++++
- 3 files changed, 15 insertions(+), 8 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -45,9 +45,10 @@ struct bcm63xx_enet_platform_data {
- #define ENETSW_MAX_PORT 6
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-
-+#define ENETSW_RGMII_PORT0 4
-+
- struct bcm63xx_enetsw_port {
- int used;
-- int external_phy;
- int phy_id;
-
- int bypass_link;
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2046,6 +2046,7 @@ static void swphy_poll_timer(unsigned lo
- for (i = 0; i < priv->num_ports; i++) {
- struct bcm63xx_enetsw_port *port;
- int val, j, up, advertise, lpa, lpa2, speed, duplex, media;
-+ int external_phy = bcm_enet_port_is_rgmii(i);
- u8 override;
-
- port = &priv->used_ports[i];
-@@ -2057,7 +2058,7 @@ static void swphy_poll_timer(unsigned lo
-
- /* dummy read to clear */
- for (j = 0; j < 2; j++)
-- val = bcmenet_sw_mdio_read(priv, port->external_phy,
-+ val = bcmenet_sw_mdio_read(priv, external_phy,
- port->phy_id, MII_BMSR);
-
- if (val == 0xffff)
-@@ -2081,14 +2082,14 @@ static void swphy_poll_timer(unsigned lo
- continue;
- }
-
-- advertise = bcmenet_sw_mdio_read(priv, port->external_phy,
-+ advertise = bcmenet_sw_mdio_read(priv, external_phy,
- port->phy_id, MII_ADVERTISE);
-
-- lpa = bcmenet_sw_mdio_read(priv, port->external_phy,
-- port->phy_id, MII_LPA);
-+ lpa = bcmenet_sw_mdio_read(priv, external_phy, port->phy_id,
-+ MII_LPA);
-
-- lpa2 = bcmenet_sw_mdio_read(priv, port->external_phy,
-- port->phy_id, MII_STAT1000);
-+ lpa2 = bcmenet_sw_mdio_read(priv, external_phy, port->phy_id,
-+ MII_STAT1000);
-
- /* figure out media and duplex from advertise and LPA values */
- media = mii_nway_result(lpa & advertise);
-@@ -2457,7 +2458,7 @@ static int bcm_enetsw_phy_is_external(st
- if (!priv->used_ports[i].used)
- continue;
- if (priv->used_ports[i].phy_id == phy_id)
-- return priv->used_ports[i].external_phy;
-+ return bcm_enet_port_is_rgmii(i);
- }
-
- printk_once(KERN_WARNING "bcm63xx_enet: could not find a used port "
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -365,4 +365,9 @@ struct bcm_enet_priv {
- spinlock_t enetsw_mdio_lock;
- };
-
-+static inline int bcm_enet_port_is_rgmii(int portid)
-+{
-+ return portid >= ENETSW_RGMII_PORT0;
-+}
-+
- #endif /* ! BCM63XX_ENET_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/422-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch b/target/linux/brcm63xx/patches-3.3/422-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
deleted file mode 100644
index 7d1f3f3f81..0000000000
--- a/target/linux/brcm63xx/patches-3.3/422-bcm63xx_enet-enable-rgmii-clock-on-external-ports.patch
+++ /dev/null
@@ -1,53 +0,0 @@
-From d8237d704fc25eb2fc25ef4403608b78c6a6d4be Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 15 Jul 2012 20:08:57 +0200
-Subject: [PATCH 54/81] bcm63xx_enet: enable rgmii clock on external ports
-
----
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 13 +++++++++++++
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 12 ++++++++++++
- 2 files changed, 25 insertions(+), 0 deletions(-)
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -838,6 +838,19 @@
- #define ENETSW_PORTOV_FDX_MASK (1 << 1)
- #define ENETSW_PORTOV_LINKUP_MASK (1 << 0)
-
-+/* Port RGMII control register */
-+#define ENETSW_RGMII_CTRL_REG(x) (0x60 + (x))
-+#define ENETSW_RGMII_CTRL_GMII_CLK_EN (1 << 7)
-+#define ENETSW_RGMII_CTRL_MII_OVERRIDE_EN (1 << 6)
-+#define ENETSW_RGMII_CTRL_MII_MODE_MASK (3 << 4)
-+#define ENETSW_RGMII_CTRL_RGMII_MODE (0 << 4)
-+#define ENETSW_RGMII_CTRL_MII_MODE (1 << 4)
-+#define ENETSW_RGMII_CTRL_RVMII_MODE (2 << 4)
-+#define ENETSW_RGMII_CTRL_TIMING_SEL_EN (1 << 0)
-+
-+/* Port RGMII timing register */
-+#define ENETSW_RGMII_TIMING_REG(x) (0x68 + (x))
-+
- /* MDIO control register */
- #define ENETSW_MDIOC_REG (0xb0)
- #define ENETSW_MDIOC_EXT_MASK (1 << 16)
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -2222,6 +2222,18 @@ static int bcm_enetsw_open(struct net_de
- priv->sw_port_link[i] = 0;
- }
-
-+ /* enable external ports */
-+ for (i = ENETSW_RGMII_PORT0; i < priv->num_ports; i++) {
-+ u8 rgmii_ctrl;
-+
-+ if (!priv->used_ports[i].used)
-+ continue;
-+
-+ rgmii_ctrl = enetsw_readb(priv, ENETSW_RGMII_CTRL_REG(i));
-+ rgmii_ctrl |= ENETSW_RGMII_CTRL_GMII_CLK_EN;
-+ enetsw_writeb(priv, rgmii_ctrl, ENETSW_RGMII_CTRL_REG(i));
-+ }
-+
- /* reset mib */
- val = enetsw_readb(priv, ENETSW_GMCR_REG);
- val |= ENETSW_GMCR_RST_MIB_MASK;
diff --git a/target/linux/brcm63xx/patches-3.3/423-bcm63xx_enet-fix-lockup-on-BCM6328.patch b/target/linux/brcm63xx/patches-3.3/423-bcm63xx_enet-fix-lockup-on-BCM6328.patch
deleted file mode 100644
index 4306ce753e..0000000000
--- a/target/linux/brcm63xx/patches-3.3/423-bcm63xx_enet-fix-lockup-on-BCM6328.patch
+++ /dev/null
@@ -1,93 +0,0 @@
-From 382a0b0dc4cbd0e0fbfd6c2d132e972c3d1245b0 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 13 Nov 2011 14:59:37 +0100
-Subject: [PATCH 39/84] bcm63xx_enet: fix lockup on BCM6328
-
-BCM6328 locks up on a maxburst size of 16, reduce it to 8 for BCM6328 and
-BCM6368.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 13 +++++++------
- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 4 ++++
- 2 files changed, 11 insertions(+), 6 deletions(-)
-
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -261,7 +261,6 @@ static int bcm_enet_refill_rx(struct net
- if (!skb)
- break;
- priv->rx_skb[desc_idx] = skb;
--
- p = dma_map_single(&priv->pdev->dev, skb->data,
- priv->rx_skb_size,
- DMA_FROM_DEVICE);
-@@ -995,9 +994,9 @@ static int bcm_enet_open(struct net_devi
- enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG);
-
- /* set dma maximum burst len */
-- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+ enet_dmac_writel(priv, priv->dma_maxburst,
- ENETDMAC_MAXBURST_REG(priv->rx_chan));
-- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+ enet_dmac_writel(priv, priv->dma_maxburst,
- ENETDMAC_MAXBURST_REG(priv->tx_chan));
-
- /* set correct transmit fifo watermark */
-@@ -1593,7 +1592,7 @@ static int compute_hw_mtu(struct bcm_ene
- * it's appended
- */
- priv->rx_skb_size = ALIGN(actual_mtu + ETH_FCS_LEN,
-- BCMENET_DMA_MAXBURST * 4);
-+ priv->dma_maxburst * 4);
- return 0;
- }
-
-@@ -1701,6 +1700,7 @@ static int __devinit bcm_enet_probe(stru
- priv = netdev_priv(dev);
-
- priv->enet_is_sw = false;
-+ priv->dma_maxburst = BCMENET_DMA_MAXBURST;
-
- ret = compute_hw_mtu(priv, dev->mtu);
- if (ret)
-@@ -2282,9 +2282,9 @@ static int bcm_enetsw_open(struct net_de
- enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan));
-
- /* set dma maximum burst len */
-- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+ enet_dmac_writel(priv, priv->dma_maxburst,
- ENETDMAC_MAXBURST_REG(priv->rx_chan));
-- enet_dmac_writel(priv, BCMENET_DMA_MAXBURST,
-+ enet_dmac_writel(priv, priv->dma_maxburst,
- ENETDMAC_MAXBURST_REG(priv->tx_chan));
-
- /* set flow control low/high threshold to 1/3 / 2/3 */
-@@ -2749,6 +2749,7 @@ static int __devinit bcm_enetsw_probe(st
- priv->irq_tx = irq_tx;
- priv->rx_ring_size = BCMENET_DEF_RX_DESC;
- priv->tx_ring_size = BCMENET_DEF_TX_DESC;
-+ priv->dma_maxburst = BCMENETSW_DMA_MAXBURST;
-
- pd = pdev->dev.platform_data;
- if (pd) {
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -17,6 +17,7 @@
-
- /* maximum burst len for dma (4 bytes unit) */
- #define BCMENET_DMA_MAXBURST 16
-+#define BCMENETSW_DMA_MAXBURST 8
-
- /* tx transmit threshold (4 bytes unit), fifo is 256 bytes, the value
- * must be low enough so that a DMA transfer of above burst length can
-@@ -280,6 +281,9 @@ struct bcm_enet_priv {
- /* number of dma desc in tx ring */
- int tx_ring_size;
-
-+ /* maximum dma burst size */
-+ int dma_maxburst;
-+
- /* cpu view of rx dma ring */
- struct bcm_enet_desc *tx_desc_cpu;
-
diff --git a/target/linux/brcm63xx/patches-3.3/424-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch b/target/linux/brcm63xx/patches-3.3/424-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch
deleted file mode 100644
index e665249c5e..0000000000
--- a/target/linux/brcm63xx/patches-3.3/424-MIPS-BCM63XX-add-support-for-BCM6328-in-bcm_enetsw.patch
+++ /dev/null
@@ -1,103 +0,0 @@
-From f1c1bfa89cdac76a215d0e21161da9f8f8373437 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 14 Jun 2011 21:14:39 +0200
-Subject: [PATCH 40/84] MIPS: BCM63XX: add support for BCM6328 in bcm_enetsw
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 34 ++++++++++++++-----
- arch/mips/bcm63xx/dev-enet.c | 9 +++--
- .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 1 +
- 3 files changed, 32 insertions(+), 12 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -118,21 +118,37 @@ static struct clk clk_ephy = {
- */
- static void enetsw_set(struct clk *clk, int enable)
- {
-- if (!BCMCPU_IS_6368())
-+ u32 mask;
-+
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
- return;
-- bcm_hwclock_set(CKCTL_6368_ROBOSW_EN |
-- CKCTL_6368_SWPKT_USB_EN |
-- CKCTL_6368_SWPKT_SAR_EN, enable);
-+
-+ if (BCMCPU_IS_6328())
-+ mask = CKCTL_6328_ROBOSW_EN;
-+ else
-+ mask = CKCTL_6368_ROBOSW_EN | CKCTL_6368_SWPKT_USB_EN |
-+ CKCTL_6368_SWPKT_SAR_EN;
-+
-+ bcm_hwclock_set(mask, enable);
- if (enable) {
-+ u32 reg;
- u32 val;
-
-+ if (BCMCPU_IS_6328()) {
-+ reg = PERF_SOFTRESET_6328_REG;
-+ mask = SOFTRESET_6328_ENETSW_MASK;
-+ } else {
-+ reg = PERF_SOFTRESET_6368_REG;
-+ mask = SOFTRESET_6368_ENETSW_MASK;
-+ }
-+
- /* reset switch core afer clock change */
-- val = bcm_perf_readl(PERF_SOFTRESET_6368_REG);
-- val &= ~SOFTRESET_6368_ENETSW_MASK;
-- bcm_perf_writel(val, PERF_SOFTRESET_6368_REG);
-+ val = bcm_perf_readl(reg);
-+ val &= ~mask;
-+ bcm_perf_writel(val, reg);
- msleep(10);
-- val |= SOFTRESET_6368_ENETSW_MASK;
-- bcm_perf_writel(val, PERF_SOFTRESET_6368_REG);
-+ val |= mask;
-+ bcm_perf_writel(val, reg);
- msleep(10);
- }
- }
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -141,7 +141,7 @@ static int __init register_shared(void)
- shared_res[0].end = shared_res[0].start;
- shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
-
-- if (BCMCPU_IS_6368())
-+ if (BCMCPU_IS_6328() || BCMCPU_IS_6368())
- chan_count = 32;
- else
- chan_count = 16;
-@@ -224,7 +224,7 @@ bcm63xx_enetsw_register(const struct bcm
- {
- int ret;
-
-- if (!BCMCPU_IS_6368())
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
- return -ENODEV;
-
- ret = register_shared();
-@@ -241,7 +241,10 @@ bcm63xx_enetsw_register(const struct bcm
-
- memcpy(bcm63xx_enetsw_device.dev.platform_data, pd, sizeof (*pd));
-
-- enetsw_pd.num_ports = ENETSW_PORTS_6368;
-+ if (BCMCPU_IS_6328())
-+ enetsw_pd.num_ports = ENETSW_PORTS_6328;
-+ else if (BCMCPU_IS_6368())
-+ enetsw_pd.num_ports = ENETSW_PORTS_6368;
-
- ret = platform_device_register(&bcm63xx_enetsw_device);
- if (ret)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -43,6 +43,7 @@ struct bcm63xx_enet_platform_data {
- * on board ethernet switch platform data
- */
- #define ENETSW_MAX_PORT 6
-+#define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-
- #define ENETSW_RGMII_PORT0 4
diff --git a/target/linux/brcm63xx/patches-3.3/425-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch b/target/linux/brcm63xx/patches-3.3/425-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch
deleted file mode 100644
index 5b25344671..0000000000
--- a/target/linux/brcm63xx/patches-3.3/425-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From 56be5a2d7e08faa7bb306faaf352ac4e6ac52c01 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 12 Nov 2011 12:18:26 +0100
-Subject: [PATCH 26/60] MIPS: BCM63XX: add HS SPI platform device and register it
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/Makefile | 5 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +
- arch/mips/bcm63xx/dev-hsspi.c | 57 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h | 20 +++++++
- 4 files changed, 82 insertions(+), 2 deletions(-)
- create mode 100644 arch/mips/bcm63xx/dev-hsspi.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,7 @@
- obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-- dev-dsp.o dev-enet.o dev-flash.o dev-pcmcia.o dev-rng.o \
-- dev-spi.o dev-uart.o dev-usb-ehci.o dev-usb-ohci.o dev-wdt.o
-+ dev-dsp.o dev-enet.o dev-flash.o dev-hsspi.o dev-pcmcia.o \
-+ dev-rng.o dev-spi.o dev-uart.o dev-usb-ehci.o \
-+ dev-usb-ohci.o dev-wdt.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
- obj-y += boards/
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -25,6 +25,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
- #include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_dev_pcmcia.h>
- #include <bcm63xx_dev_spi.h>
- #include <bcm63xx_dev_usb_ohci.h>
-@@ -945,6 +946,7 @@ int __init board_register_devices(void)
- pr_err(PFX "failed to register fallback SPROM\n");
- }
- #endif
-+ bcm63xx_hsspi_register();
-
- bcm63xx_spi_register();
-
---- /dev/null
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -0,0 +1,57 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <bcm63xx_regs.h>
-+
-+static struct resource spi_resources[] = {
-+ {
-+ .start = -1, /* filled at runtime */
-+ .end = -1, /* filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = -1, /* filled at runtime */
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct bcm63xx_hsspi_pdata spi_pdata = {
-+ .bus_num = 0,
-+};
-+
-+static struct platform_device bcm63xx_hsspi_device = {
-+ .name = "bcm63xx-hsspi",
-+ .id = 0,
-+ .num_resources = ARRAY_SIZE(spi_resources),
-+ .resource = spi_resources,
-+ .dev = {
-+ .platform_data = &spi_pdata,
-+ },
-+};
-+
-+int __init bcm63xx_hsspi_register(void)
-+{
-+
-+ if (!BCMCPU_IS_6328())
-+ return -ENODEV;
-+
-+ spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
-+ spi_resources[0].end = spi_resources[0].start;
-+ spi_resources[0].end += RSET_HSSPI_SIZE - 1;
-+ spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
-+
-+ spi_pdata.speed_hz = HSSPI_PLL_HZ_6328;
-+
-+ return platform_device_register(&bcm63xx_hsspi_device);
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-@@ -0,0 +1,20 @@
-+#ifndef BCM63XX_DEV_HSSPI_H
-+#define BCM63XX_DEV_HSSPI_H
-+
-+#include <linux/types.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_regs.h>
-+
-+int __init bcm63xx_hsspi_register(void);
-+
-+struct bcm63xx_hsspi_pdata {
-+ int bus_num;
-+ u32 speed_hz;
-+};
-+
-+#define bcm_hsspi_readl(o) bcm_rset_readl(RSET_HSSPI, (o))
-+#define bcm_hsspi_writel(v, o) bcm_rset_writel(RSET_HSSPI, (v), (o))
-+
-+#define HSSPI_PLL_HZ_6328 133333333
-+
-+#endif /* BCM63XX_DEV_HSSPI_H */
diff --git a/target/linux/brcm63xx/patches-3.3/426-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch b/target/linux/brcm63xx/patches-3.3/426-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch
deleted file mode 100644
index 739c2c60f7..0000000000
--- a/target/linux/brcm63xx/patches-3.3/426-SPI-MIPS-BCM63XX-Add-HS-SPI-driver.patch
+++ /dev/null
@@ -1,481 +0,0 @@
-From 4b27423676485d05bcd6fc6f3809164fb8f9d22d Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 12 Nov 2011 12:19:55 +0100
-Subject: [PATCH 30/60] SPI: MIPS: BCM63XX: Add HSSPI driver
-
-Add a driver for the High Speed SPI controller found on newer BCM63XX SoCs.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- .../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h | 2 +
- drivers/spi/Kconfig | 7 +
- drivers/spi/Makefile | 1 +
- drivers/spi/spi-bcm63xx-hsspi.c | 427 ++++++++++++++++++++
- 4 files changed, 437 insertions(+), 0 deletions(-)
- create mode 100644 drivers/spi/spi-bcm63xx-hsspi.c
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-@@ -17,4 +17,6 @@ struct bcm63xx_hsspi_pdata {
-
- #define HSSPI_PLL_HZ_6328 133333333
-
-+#define HSSPI_BUFFER_LEN 512
-+
- #endif /* BCM63XX_DEV_HSSPI_H */
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -100,6 +100,13 @@ config SPI_BCM63XX
- help
- Enable support for the SPI controller on the Broadcom BCM63xx SoCs.
-
-+config SPI_BCM63XX_HSSPI
-+ tristate "Broadcom BCM63XX HS SPI controller driver"
-+ depends on BCM63XX
-+ help
-+ This enables support for the High Speed SPI controller present on
-+ newer Broadcom BCM63XX SoCs.
-+
- config SPI_BITBANG
- tristate "Utilities for Bitbanging SPI masters"
- help
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -15,6 +15,7 @@ obj-$(CONFIG_SPI_ATMEL) += spi-atmel.o
- obj-$(CONFIG_SPI_ATH79) += spi-ath79.o
- obj-$(CONFIG_SPI_AU1550) += spi-au1550.o
- obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o
-+obj-$(CONFIG_SPI_BCM63XX_HSSPI) += spi-bcm63xx-hsspi.o
- obj-$(CONFIG_SPI_BFIN) += spi-bfin5xx.o
- obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o
- obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o
---- /dev/null
-+++ b/drivers/spi/spi-bcm63xx-hsspi.c
-@@ -0,0 +1,427 @@
-+/*
-+ * Broadcom BCM63XX High Speed SPI Controller driver
-+ *
-+ * Copyright 2000-2010 Broadcom Corporation
-+ * Copyright 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ * Licensed under the GNU/GPL. See COPYING for details.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/clk.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/delay.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/spi/spi.h>
-+#include <linux/workqueue.h>
-+
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_dev_hsspi.h>
-+
-+#define HSSPI_OP_CODE_SHIFT 13
-+#define HSSPI_OP_SLEEP (0 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_READ_WRITE (1 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_WRITE (2 << HSSPI_OP_CODE_SHIFT)
-+#define HSSPI_OP_READ (3 << HSSPI_OP_CODE_SHIFT)
-+
-+#define HSSPI_MAX_PREPEND_LEN 15
-+
-+#define HSSPI_MAX_SYNC_CLOCK 30000000
-+
-+struct bcm63xx_hsspi {
-+ struct completion done;
-+ struct spi_transfer *curr_trans;
-+
-+ struct platform_device *pdev;
-+ struct clk *clk;
-+ void __iomem *regs;
-+ u8 __iomem *fifo;
-+
-+ u32 speed_hz;
-+ int irq;
-+};
-+
-+static void bcm63xx_hsspi_set_clk(struct bcm63xx_hsspi *bs, int hz,
-+ int profile)
-+{
-+ u32 reg;
-+
-+ reg = DIV_ROUND_UP(2048, DIV_ROUND_UP(bs->speed_hz, hz));
-+ bcm_hsspi_writel(CLK_CTRL_ACCUM_RST_ON_LOOP | reg,
-+ HSSPI_PROFILE_CLK_CTRL_REG(profile));
-+
-+ reg = bcm_hsspi_readl(HSSPI_PROFILE_SIGNAL_CTRL_REG(profile));
-+ if (hz > HSSPI_MAX_SYNC_CLOCK)
-+ reg |= SIGNAL_CTRL_ASYNC_INPUT_PATH;
-+ else
-+ reg &= ~SIGNAL_CTRL_ASYNC_INPUT_PATH;
-+ bcm_hsspi_writel(reg, HSSPI_PROFILE_SIGNAL_CTRL_REG(profile));
-+}
-+
-+static int bcm63xx_hsspi_do_txrx(struct spi_device *spi,
-+ struct spi_transfer *t1,
-+ struct spi_transfer *t2)
-+{
-+ struct bcm63xx_hsspi *bs = spi_master_get_devdata(spi->master);
-+ u8 chip_select = spi->chip_select;
-+ u16 opcode = 0;
-+ int len, prepend_size = 0;
-+
-+ init_completion(&bs->done);
-+
-+ bs->curr_trans = t2 ? t2 : t1;
-+ bcm63xx_hsspi_set_clk(bs, bs->curr_trans->speed_hz, chip_select);
-+
-+ if (t2 && !t2->tx_buf)
-+ prepend_size = t1->len;
-+
-+ bcm_hsspi_writel(prepend_size << MODE_CTRL_PREPENDBYTE_CNT_SHIFT |
-+ 2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT |
-+ 2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff,
-+ HSSPI_PROFILE_MODE_CTRL_REG(chip_select));
-+
-+ if (t1->rx_buf && t1->tx_buf)
-+ opcode = HSSPI_OP_READ_WRITE;
-+ else if (t1->rx_buf || (t2 && t2->rx_buf))
-+ opcode = HSSPI_OP_READ;
-+ else if (t1->tx_buf)
-+ opcode = HSSPI_OP_WRITE;
-+
-+ if (opcode == HSSPI_OP_READ && t2)
-+ len = t2->len;
-+ else
-+ len = t1->len;
-+
-+ if (t1->tx_buf) {
-+ memcpy_toio(bs->fifo + 2, t1->tx_buf, t1->len);
-+ if (t2 && t2->tx_buf) {
-+ memcpy_toio(bs->fifo + 2 + t1->len,
-+ t2->tx_buf, t2->len);
-+ len += t2->len;
-+ }
-+ }
-+
-+ opcode |= len;
-+ memcpy_toio(bs->fifo, &opcode, sizeof(opcode));
-+
-+ /* enable interrupt */
-+ bcm_hsspi_writel(HSSPI_PING0_CMD_DONE, HSSPI_INT_MASK_REG);
-+
-+ /* start the transfer */
-+ bcm_hsspi_writel(chip_select << PINGPONG_CMD_SS_SHIFT |
-+ chip_select << PINGPONG_CMD_PROFILE_SHIFT |
-+ PINGPONG_COMMAND_START_NOW,
-+ HSSPI_PINGPONG_COMMAND_REG(0));
-+
-+ if (wait_for_completion_timeout(&bs->done, HZ) == 0) {
-+ dev_err(&bs->pdev->dev, "transfer timed out!\n");
-+ return -ETIMEDOUT;
-+ }
-+
-+ return t1->len + (t2 ? t2->len : 0);
-+}
-+
-+static int bcm63xx_hsspi_setup(struct spi_device *spi)
-+{
-+ u32 reg;
-+
-+ if (spi->bits_per_word != 8)
-+ return -EINVAL;
-+
-+ if (spi->max_speed_hz == 0)
-+ return -EINVAL;
-+
-+ reg = bcm_hsspi_readl(HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
-+ reg &= ~(SIGNAL_CTRL_LAUNCH_RISING | SIGNAL_CTRL_LATCH_RISING);
-+ if (spi->mode & SPI_CPHA)
-+ reg |= SIGNAL_CTRL_LAUNCH_RISING;
-+ else
-+ reg |= SIGNAL_CTRL_LATCH_RISING;
-+ bcm_hsspi_writel(reg, HSSPI_PROFILE_SIGNAL_CTRL_REG(spi->chip_select));
-+
-+ return 0;
-+}
-+
-+static int bcm63xx_hsspi_transfer_one(struct spi_master *master,
-+ struct spi_message *msg)
-+{
-+ struct spi_transfer *t, *prev = NULL;
-+ struct spi_device *spi = msg->spi;
-+ u32 reg;
-+ int ret = -EINVAL;
-+ int len = 0;
-+
-+ /* check if we are able to make these transfers */
-+ list_for_each_entry(t, &msg->transfers, transfer_list) {
-+ if (!t->tx_buf && !t->rx_buf)
-+ goto out;
-+
-+ if (t->speed_hz == 0)
-+ t->speed_hz = spi->max_speed_hz;
-+
-+ if (t->speed_hz > spi->max_speed_hz)
-+ goto out;
-+
-+ if (t->len > HSSPI_BUFFER_LEN)
-+ goto out;
-+
-+ /*
-+ * This controller does not support keeping the chip select
-+ * active between transfers.
-+ * This logic currently supports combining:
-+ * write then read with no cs_change (e.g. m25p80 RDSR)
-+ * write then write with no cs_change (e.g. m25p80 PP)
-+ */
-+ if (prev && prev->tx_buf && !prev->cs_change && !t->cs_change) {
-+ /*
-+ * reject if we have to combine two tx transfers and
-+ * their combined length is bigger than the buffer
-+ */
-+ if (prev->tx_buf && t->tx_buf &&
-+ (prev->len + t->len) > HSSPI_BUFFER_LEN)
-+ goto out;
-+ /*
-+ * reject if we need write more than 15 bytes in read
-+ * then write.
-+ */
-+ if (prev->tx_buf && t->rx_buf &&
-+ prev->len > HSSPI_MAX_PREPEND_LEN)
-+ goto out;
-+ }
-+
-+ }
-+
-+ /* setup clock polarity */
-+ reg = bcm_hsspi_readl(HSSPI_GLOBAL_CTRL_REG);
-+ reg &= ~GLOBAL_CTRL_CLK_POLARITY;
-+ if (spi->mode & SPI_CPOL)
-+ reg |= GLOBAL_CTRL_CLK_POLARITY;
-+ bcm_hsspi_writel(reg, HSSPI_GLOBAL_CTRL_REG);
-+
-+ list_for_each_entry(t, &msg->transfers, transfer_list) {
-+ if (prev && prev->tx_buf && !prev->cs_change && !t->cs_change) {
-+ /* combine write with following transfer */
-+ ret = bcm63xx_hsspi_do_txrx(msg->spi, prev, t);
-+ if (ret < 0)
-+ goto out;
-+
-+ len += ret;
-+ prev = NULL;
-+ continue;
-+ }
-+
-+ /* write the previous pending transfer */
-+ if (prev != NULL) {
-+ ret = bcm63xx_hsspi_do_txrx(msg->spi, prev, NULL);
-+ if (ret < 0)
-+ goto out;
-+
-+ len += ret;
-+ }
-+
-+ prev = t;
-+ }
-+
-+ /* do last pending transfer */
-+ if (prev != NULL) {
-+ ret = bcm63xx_hsspi_do_txrx(msg->spi, prev, NULL);
-+ if (ret < 0)
-+ goto out;
-+ len += ret;
-+ }
-+
-+ msg->actual_length = len;
-+ ret = 0;
-+out:
-+ msg->status = ret;
-+ spi_finalize_current_message(master);
-+ return 0;
-+}
-+
-+static irqreturn_t bcm63xx_hsspi_interrupt(int irq, void *dev_id)
-+{
-+ struct spi_master *master = (struct spi_master *)dev_id;
-+ struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+ if (bcm_hsspi_readl(HSSPI_INT_STATUS_MASKED_REG) == 0)
-+ return IRQ_NONE;
-+
-+ bcm_hsspi_writel(HSSPI_INT_CLEAR_ALL, HSSPI_INT_STATUS_REG);
-+ bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
-+
-+ if (bs->curr_trans && bs->curr_trans->rx_buf)
-+ memcpy_fromio(bs->curr_trans->rx_buf, bs->fifo,
-+ bs->curr_trans->len);
-+ complete(&bs->done);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static int __devinit bcm63xx_hsspi_probe(struct platform_device *pdev)
-+{
-+
-+ struct spi_master *master;
-+ struct bcm63xx_hsspi *bs;
-+ struct resource *res_mem;
-+ void __iomem *regs;
-+ struct device *dev = &pdev->dev;
-+ struct bcm63xx_hsspi_pdata *pdata = pdev->dev.platform_data;
-+ struct clk *clk;
-+ int irq;
-+ int ret;
-+
-+ irq = platform_get_irq(pdev, 0);
-+ if (irq < 0) {
-+ dev_err(dev, "no irq\n");
-+ return -ENXIO;
-+ }
-+
-+ res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+ regs = devm_request_and_ioremap(dev, res_mem);
-+ if (!regs) {
-+ dev_err(dev, "unable to ioremap regs\n");
-+ return -ENXIO;
-+ }
-+
-+ clk = clk_get(dev, "hsspi");
-+
-+ if (IS_ERR(clk)) {
-+ ret = PTR_ERR(clk);
-+ goto out_release;
-+ }
-+
-+ clk_prepare_enable(clk);
-+
-+ master = spi_alloc_master(&pdev->dev, sizeof(*bs));
-+ if (!master) {
-+ ret = -ENOMEM;
-+ goto out_disable_clk;
-+ }
-+
-+ bs = spi_master_get_devdata(master);
-+ bs->pdev = pdev;
-+ bs->clk = clk;
-+ bs->regs = regs;
-+
-+ master->bus_num = pdata->bus_num;
-+ master->num_chipselect = 8;
-+ master->setup = bcm63xx_hsspi_setup;
-+ master->transfer_one_message = bcm63xx_hsspi_transfer_one;
-+ master->mode_bits = SPI_CPOL | SPI_CPHA;
-+
-+ bs->speed_hz = pdata->speed_hz;
-+ bs->fifo = (u8 __iomem *)(bs->regs + HSSPI_FIFO_REG(0));
-+
-+ platform_set_drvdata(pdev, master);
-+
-+ bs->curr_trans = NULL;
-+
-+ /* Initialize the hardware */
-+ bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
-+
-+ /* clean up any pending interrupts */
-+ bcm_hsspi_writel(HSSPI_INT_CLEAR_ALL, HSSPI_INT_STATUS_REG);
-+
-+ bcm_hsspi_writel(bcm_hsspi_readl(HSSPI_GLOBAL_CTRL_REG) |
-+ GLOBAL_CTRL_CLK_GATE_SSOFF,
-+ HSSPI_GLOBAL_CTRL_REG);
-+
-+ ret = devm_request_irq(dev, irq, bcm63xx_hsspi_interrupt, IRQF_SHARED,
-+ pdev->name, master);
-+
-+ if (ret)
-+ goto out_put_master;
-+
-+ /* register and we are done */
-+ ret = spi_register_master(master);
-+ if (ret)
-+ goto out_free_irq;
-+
-+ return 0;
-+
-+out_free_irq:
-+ devm_free_irq(dev, bs->irq, master);
-+out_put_master:
-+ spi_master_put(master);
-+out_disable_clk:
-+ clk_disable_unprepare(clk);
-+ clk_put(clk);
-+out_release:
-+ devm_ioremap_release(dev, regs);
-+
-+ return ret;
-+}
-+
-+
-+static int __exit bcm63xx_hsspi_remove(struct platform_device *pdev)
-+{
-+ struct spi_master *master = platform_get_drvdata(pdev);
-+ struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+ spi_unregister_master(master);
-+
-+ /* reset the hardware and block queue progress */
-+ bcm_hsspi_writel(0, HSSPI_INT_MASK_REG);
-+ clk_disable_unprepare(bs->clk);
-+ clk_put(bs->clk);
-+
-+ return 0;
-+}
-+
-+#ifdef CONFIG_PM
-+static int bcm63xx_hsspi_suspend(struct platform_device *pdev,
-+ pm_message_t mesg)
-+{
-+ struct spi_master *master = platform_get_drvdata(pdev);
-+ struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+ spi_master_suspend(master);
-+ clk_disable(bs->clk);
-+
-+ return 0;
-+}
-+
-+static int bcm63xx_hsspi_resume(struct platform_device *pdev)
-+{
-+ struct spi_master *master = platform_get_drvdata(pdev);
-+ struct bcm63xx_hsspi *bs = spi_master_get_devdata(master);
-+
-+ clk_enable(bs->clk);
-+ spi_master_resume(master);
-+
-+ return 0;
-+}
-+
-+static const struct dev_pm_ops bcm63xx_hsspi_pm_ops = {
-+ .suspend = bcm63xx_hsspi_suspend,
-+ .resume = bcm63xx_hsspi_resume,
-+};
-+
-+#define BCM63XX_HSSPI_PM_OPS (&bcm63xx_hsspi_pm_ops)
-+#else
-+#define BCM63XX_HSSPI_PM_OPS NULL
-+#endif
-+
-+
-+
-+static struct platform_driver bcm63xx_hsspi_driver = {
-+ .driver = {
-+ .name = "bcm63xx-hsspi",
-+ .owner = THIS_MODULE,
-+ .pm = BCM63XX_HSSPI_PM_OPS,
-+ },
-+ .probe = bcm63xx_hsspi_probe,
-+ .remove = __exit_p(bcm63xx_hsspi_remove),
-+};
-+
-+module_platform_driver(bcm63xx_hsspi_driver);
-+
-+MODULE_ALIAS("platform:bcm63xx_hsspi");
-+MODULE_DESCRIPTION("Broadcom BCM63xx HS SPI Controller driver");
-+MODULE_AUTHOR("Jonas Gorski <jonas.gorski@gmail.com>");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/brcm63xx/patches-3.3/427-MIPS-BCM63XX-Register-SPI-flash-if-present.patch b/target/linux/brcm63xx/patches-3.3/427-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
deleted file mode 100644
index 14776af760..0000000000
--- a/target/linux/brcm63xx/patches-3.3/427-MIPS-BCM63XX-Register-SPI-flash-if-present.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From d135d94b3d1fe599d13e7198d5f502912d694c13 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 3 Jul 2011 15:00:38 +0200
-Subject: [PATCH 29/60] MIPS: BCM63XX: Register SPI flash if present
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-flash.c | 33 +++++++++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 2 +
- 2 files changed, 33 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -16,9 +16,12 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
- #include <linux/mtd/physmap.h>
-+#include <linux/spi/spi.h>
-+#include <linux/spi/flash.h>
-
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-
-@@ -55,6 +58,21 @@ static struct platform_device mtd_dev =
- },
- };
-
-+static struct flash_platform_data bcm63xx_flash_data = {
-+ .part_probe_types = bcm63xx_part_types,
-+};
-+
-+static struct spi_board_info bcm63xx_spi_flash_info[] = {
-+ {
-+ .bus_num = 0,
-+ .chip_select = 0,
-+ .mode = 0,
-+ .max_speed_hz = 781000,
-+ .modalias = "m25p80",
-+ .platform_data = &bcm63xx_flash_data,
-+ },
-+};
-+
- static int __init bcm63xx_detect_flash_type(void)
- {
- u32 val;
-@@ -62,6 +80,11 @@ static int __init bcm63xx_detect_flash_t
- switch (bcm63xx_get_cpu_id()) {
- case BCM6328_CPU_ID:
- val = bcm_misc_readl(MISC_STRAPBUS_6328_REG);
-+ if (val & STRAPBUS_6328_HSSPI_CLK_FAST)
-+ bcm63xx_spi_flash_info[0].max_speed_hz = 33333334;
-+ else
-+ bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
-+
- if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
- return BCM63XX_FLASH_TYPE_SERIAL;
- else
-@@ -79,6 +102,9 @@ static int __init bcm63xx_detect_flash_t
- return BCM63XX_FLASH_TYPE_SERIAL;
- case BCM6368_CPU_ID:
- val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
-+ if (val & STRAPBUS_6368_SPI_CLK_FAST)
-+ bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
- switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
- case STRAPBUS_6368_BOOT_SEL_NAND:
- return BCM63XX_FLASH_TYPE_NAND;
-@@ -110,8 +136,11 @@ int __init bcm63xx_flash_register(void)
-
- return platform_device_register(&mtd_dev);
- case BCM63XX_FLASH_TYPE_SERIAL:
-- pr_warn("unsupported serial flash detected\n");
-- return -ENODEV;
-+ if (BCMCPU_IS_6328())
-+ bcm63xx_flash_data.max_transfer_len = HSSPI_BUFFER_LEN;
-+
-+ return spi_register_board_info(bcm63xx_spi_flash_info,
-+ ARRAY_SIZE(bcm63xx_spi_flash_info));
- case BCM63XX_FLASH_TYPE_NAND:
- pr_warn("unsupported NAND flash detected\n");
- return -ENODEV;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -614,6 +614,7 @@
- #define GPIO_STRAPBUS_REG 0x40
- #define STRAPBUS_6358_BOOT_SEL_PARALLEL (1 << 1)
- #define STRAPBUS_6358_BOOT_SEL_SERIAL (0 << 1)
-+#define STRAPBUS_6368_SPI_CLK_FAST (1 << 6)
- #define STRAPBUS_6368_BOOT_SEL_MASK 0x3
- #define STRAPBUS_6368_BOOT_SEL_NAND 0
- #define STRAPBUS_6368_BOOT_SEL_SERIAL 1
-@@ -1308,6 +1309,7 @@
- #define STRAPBUS_6362_BOOT_SEL_NAND (0 << 15)
-
- #define MISC_STRAPBUS_6328_REG 0x240
-+#define STRAPBUS_6328_HSSPI_CLK_FAST (1 << 4)
- #define STRAPBUS_6328_FCVO_SHIFT 7
- #define STRAPBUS_6328_FCVO_MASK (0x1f << STRAPBUS_6328_FCVO_SHIFT)
- #define STRAPBUS_6328_BOOT_SEL_SERIAL (1 << 28)
diff --git a/target/linux/brcm63xx/patches-3.3/428-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.3/428-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch
deleted file mode 100644
index 98a229b1ac..0000000000
--- a/target/linux/brcm63xx/patches-3.3/428-MIPS-BCM63XX-add-flash-detection-for-BCM6362.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From d9666553a10ea85ea64e3e8784a42167a1709ed5 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 21 Nov 2011 00:48:52 +0100
-Subject: [PATCH 55/84] MIPS: BCM63XX: add flash detection for BCM6362
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-flash.c | 13 ++++++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 1 +
- 2 files changed, 13 insertions(+), 1 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -100,6 +100,17 @@ static int __init bcm63xx_detect_flash_t
- return BCM63XX_FLASH_TYPE_PARALLEL;
- else
- return BCM63XX_FLASH_TYPE_SERIAL;
-+ case BCM6362_CPU_ID:
-+ val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
-+ if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
-+ bcm63xx_spi_flash_info[0].max_speed_hz = 50000000;
-+ else
-+ bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-+
-+ if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
-+ return BCM63XX_FLASH_TYPE_SERIAL;
-+ else
-+ return BCM63XX_FLASH_TYPE_NAND;
- case BCM6368_CPU_ID:
- val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
- if (val & STRAPBUS_6368_SPI_CLK_FAST)
-@@ -136,7 +147,7 @@ int __init bcm63xx_flash_register(void)
-
- return platform_device_register(&mtd_dev);
- case BCM63XX_FLASH_TYPE_SERIAL:
-- if (BCMCPU_IS_6328())
-+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362())
- bcm63xx_flash_data.max_transfer_len = HSSPI_BUFFER_LEN;
-
- return spi_register_board_info(bcm63xx_spi_flash_info,
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1304,6 +1304,7 @@
-
- #define MISC_STRAPBUS_6362_REG 0x14
- #define STRAPBUS_6362_FCVO_SHIFT 1
-+#define STRAPBUS_6362_HSSPI_CLK_FAST (1 << 13)
- #define STRAPBUS_6362_FCVO_MASK (0x1f << STRAPBUS_6362_FCVO_SHIFT)
- #define STRAPBUS_6362_BOOT_SEL_SERIAL (1 << 15)
- #define STRAPBUS_6362_BOOT_SEL_NAND (0 << 15)
diff --git a/target/linux/brcm63xx/patches-3.3/428-MIPS-BCM63XX-move-nvram-related-functions-into-their.patch b/target/linux/brcm63xx/patches-3.3/428-MIPS-BCM63XX-move-nvram-related-functions-into-their.patch
deleted file mode 100644
index 8ebbdb7374..0000000000
--- a/target/linux/brcm63xx/patches-3.3/428-MIPS-BCM63XX-move-nvram-related-functions-into-their.patch
+++ /dev/null
@@ -1,351 +0,0 @@
-From 5b753c1d01c6af23d7d37d37d9de30da8a971084 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 12 May 2012 22:51:08 +0200
-Subject: [PATCH 60/79] MIPS: BCM63XX: move nvram related functions into their
- own file
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/Makefile | 6 +-
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 74 +++--------------
- arch/mips/bcm63xx/nvram.c | 84 ++++++++++++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h | 34 ++++++++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 17 ----
- 5 files changed, 134 insertions(+), 81 deletions(-)
- create mode 100644 arch/mips/bcm63xx/nvram.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,6 +1,6 @@
--obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
-- dev-dsp.o dev-enet.o dev-flash.o dev-hsspi.o dev-pcmcia.o \
-- dev-rng.o dev-spi.o dev-uart.o dev-usb-ehci.o \
-+obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o setup.o \
-+ timer.o dev-dsp.o dev-enet.o dev-flash.o dev-hsspi.o \
-+ dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-usb-ehci.o \
- dev-usb-ohci.o dev-wdt.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -21,6 +21,7 @@
- #include <bcm63xx_dev_uart.h>
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
- #include <bcm63xx_dev_pci.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
-@@ -41,8 +42,6 @@
- #define CFE_OFFSET_64K 0x10000
- #define CFE_OFFSET_128K 0x20000
-
--static struct bcm963xx_nvram nvram;
--static unsigned int mac_addr_used;
- static struct board_info board;
-
- /*
-@@ -696,50 +695,16 @@ const char *board_get_name(void)
- return board.name;
- }
-
--/*
-- * register & return a new board mac address
-- */
--static int board_get_mac_address(u8 *mac)
--{
-- u8 *p;
-- int count;
--
-- if (mac_addr_used >= nvram.mac_addr_count) {
-- printk(KERN_ERR PFX "not enough mac address\n");
-- return -ENODEV;
-- }
--
-- memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
-- p = mac + ETH_ALEN - 1;
-- count = mac_addr_used;
--
-- while (count--) {
-- do {
-- (*p)++;
-- if (*p != 0)
-- break;
-- p--;
-- } while (p != mac);
-- }
--
-- if (p == mac) {
-- printk(KERN_ERR PFX "unable to fetch mac address\n");
-- return -ENODEV;
-- }
--
-- mac_addr_used++;
-- return 0;
--}
--
- static void __init boardid_fixup(u8 *boot_addr)
- {
- struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
-+ char *board_name = (char *)bcm63xx_nvram_get_name();
-
- /* check if bcm_tag is at 64k offset */
-- if (strncmp(nvram.name, tag->board_id, BOARDID_LEN) != 0) {
-+ if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
- /* else try 128k */
- tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_128K);
-- if (strncmp(nvram.name, tag->board_id, BOARDID_LEN) != 0) {
-+ if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
- /* No tag found */
- printk(KERN_DEBUG "No bcm_tag found!\n");
- return;
-@@ -749,9 +714,9 @@ static void __init boardid_fixup(u8 *boo
- if (tag->information1[0] != '+')
- return;
-
-- strncpy(nvram.name, &tag->information1[1], BOARDID_LEN);
-+ strncpy(board_name, &tag->information1[1], BOARDID_LEN);
-
-- printk(KERN_INFO "Overriding boardid with '%s'\n", nvram.name);
-+ printk(KERN_INFO "Overriding boardid with '%s'\n", board_name);
- }
-
- /*
-@@ -759,9 +724,10 @@ static void __init boardid_fixup(u8 *boo
- */
- void __init board_prom_init(void)
- {
-- unsigned int check_len, i;
-- u8 *boot_addr, *cfe, *p;
-+ unsigned int i;
-+ u8 *boot_addr, *cfe;
- char cfe_version[32];
-+ char *board_name;
- u32 val;
-
- /* read base address of boot chip select (0)
-@@ -786,32 +752,19 @@ void __init board_prom_init(void)
- strcpy(cfe_version, "unknown");
- printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
-
-- /* extract nvram data */
-- memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram));
--
-- /* check checksum before using data */
-- if (nvram.version <= 4)
-- check_len = offsetof(struct bcm963xx_nvram, checksum_old);
-- else
-- check_len = sizeof(nvram);
-- val = 0;
-- p = (u8 *)&nvram;
-- while (check_len--)
-- val += *p;
-- if (val) {
-- printk(KERN_ERR PFX "invalid nvram checksum\n");
-+ if (bcm63xx_nvram_init(boot_addr + BCM963XX_NVRAM_OFFSET))
- return;
-- }
-
- if (strcmp(cfe_version, "unknown") != 0) {
- /* cfe present */
- boardid_fixup(boot_addr);
- }
-
-+ board_name = bcm63xx_nvram_get_name();
- /* find board by name */
- for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) {
-- if (strncmp(nvram.name, bcm963xx_boards[i]->name,
-- sizeof(nvram.name)))
-+ if (strncmp(board_name, bcm963xx_boards[i]->name,
-+ BCM63XX_NVRAM_NAMELEN))
- continue;
- /* copy, board desc array is marked initdata */
- memcpy(&board, bcm963xx_boards[i], sizeof(board));
-@@ -821,7 +774,7 @@ void __init board_prom_init(void)
- /* bail out if board is not found, will complain later */
- if (!board.name[0]) {
- char name[17];
-- memcpy(name, nvram.name, 16);
-+ memcpy(name, board_name, 16);
- name[16] = 0;
- printk(KERN_ERR PFX "unknown bcm963xx board: %s\n",
- name);
-@@ -914,15 +867,15 @@ int __init board_register_devices(void)
- bcm63xx_pcmcia_register();
-
- if (board.has_enet0 &&
-- !board_get_mac_address(board.enet0.mac_addr))
-+ !bcm63xx_nvram_get_mac_address(board.enet0.mac_addr))
- bcm63xx_enet_register(0, &board.enet0);
-
- if (board.has_enet1 &&
-- !board_get_mac_address(board.enet1.mac_addr))
-+ !bcm63xx_nvram_get_mac_address(board.enet1.mac_addr))
- bcm63xx_enet_register(1, &board.enet1);
-
- if (board.has_enetsw &&
-- !board_get_mac_address(board.enetsw.mac_addr))
-+ !bcm63xx_nvram_get_mac_address(board.enetsw.mac_addr))
- bcm63xx_enetsw_register(&board.enetsw);
-
- if (board.has_ehci0)
-@@ -938,7 +891,7 @@ int __init board_register_devices(void)
- * do this after registering enet devices
- */
- #ifdef CONFIG_SSB_PCIHOST
-- if (!board_get_mac_address(bcm63xx_sprom.il0mac)) {
-+ if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
- memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- if (ssb_arch_register_fallback_sprom(
---- /dev/null
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -0,0 +1,84 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ */
-+
-+#define pr_fmt(fmt) "bcm63xx_nvram: " fmt
-+
-+#include <linux/init.h>
-+#include <linux/export.h>
-+#include <linux/kernel.h>
-+
-+#include <bcm63xx_nvram.h>
-+
-+static struct bcm963xx_nvram nvram;
-+static int mac_addr_used;
-+
-+int __init bcm63xx_nvram_init(void *addr)
-+{
-+ unsigned int check_len;
-+ u8 *p;
-+ u32 val;
-+
-+ /* extract nvram data */
-+ memcpy(&nvram, addr, sizeof(nvram));
-+
-+ /* check checksum before using data */
-+ if (nvram.version <= 4)
-+ check_len = offsetof(struct bcm963xx_nvram, checksum_old);
-+ else
-+ check_len = sizeof(nvram);
-+ val = 0;
-+ p = (u8 *)&nvram;
-+
-+ while (check_len--)
-+ val += *p;
-+ if (val) {
-+ pr_err("invalid nvram checksum\n");
-+ return -EINVAL;
-+ }
-+
-+ return 0;
-+}
-+
-+u8 *bcm63xx_nvram_get_name(void)
-+{
-+ return nvram.name;
-+}
-+EXPORT_SYMBOL(bcm63xx_nvram_get_name);
-+
-+int bcm63xx_nvram_get_mac_address(u8 *mac)
-+{
-+ u8 *p;
-+ int count;
-+
-+ if (mac_addr_used >= nvram.mac_addr_count) {
-+ pr_err("not enough mac address\n");
-+ return -ENODEV;
-+ }
-+
-+ memcpy(mac, nvram.mac_addr_base, ETH_ALEN);
-+ p = mac + ETH_ALEN - 1;
-+ count = mac_addr_used;
-+
-+ while (count--) {
-+ do {
-+ (*p)++;
-+ if (*p != 0)
-+ break;
-+ p--;
-+ } while (p != mac);
-+ }
-+
-+ if (p == mac) {
-+ pr_err("unable to fetch mac address\n");
-+ return -ENODEV;
-+ }
-+
-+ mac_addr_used++;
-+ return 0;
-+}
-+EXPORT_SYMBOL(bcm63xx_nvram_get_mac_address);
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
-@@ -0,0 +1,34 @@
-+#ifndef BCM63XX_NVRAM_H
-+#define BCM63XX_NVRAM_H
-+
-+#include <linux/if_ether.h>
-+
-+#define BCM63XX_NVRAM_NAMELEN 16
-+
-+/*
-+ * nvram structure
-+ */
-+struct bcm963xx_nvram {
-+ u32 version;
-+ u8 reserved1[256];
-+ u8 name[BCM63XX_NVRAM_NAMELEN];
-+ u32 main_tp_number;
-+ u32 psi_size;
-+ u32 mac_addr_count;
-+ u8 mac_addr_base[ETH_ALEN];
-+ u8 reserved2[2];
-+ u32 checksum_old;
-+ u8 reserved3[720];
-+ u32 checksum_high;
-+};
-+
-+int __init bcm63xx_nvram_init(void *);
-+
-+u8 *bcm63xx_nvram_get_name(void);
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+int bcm63xx_nvram_get_mac_address(u8 *mac);
-+
-+#endif /* BCM63XX_NVRAM_H */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -15,23 +15,6 @@
- #define BCM963XX_NVRAM_OFFSET 0x580
-
- /*
-- * nvram structure
-- */
--struct bcm963xx_nvram {
-- u32 version;
-- u8 reserved1[256];
-- u8 name[16];
-- u32 main_tp_number;
-- u32 psi_size;
-- u32 mac_addr_count;
-- u8 mac_addr_base[6];
-- u8 reserved2[2];
-- u32 checksum_old;
-- u8 reserved3[720];
-- u32 checksum_high;
--};
--
--/*
- * board definition
- */
- struct board_info {
diff --git a/target/linux/brcm63xx/patches-3.3/429-MIPS-BCM63XX-export-PSI-size-from-nvram.patch b/target/linux/brcm63xx/patches-3.3/429-MIPS-BCM63XX-export-PSI-size-from-nvram.patch
deleted file mode 100644
index 34966b27f1..0000000000
--- a/target/linux/brcm63xx/patches-3.3/429-MIPS-BCM63XX-export-PSI-size-from-nvram.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From ffbeb183bf0e9e12fd607c5352f48420c32f588f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sat, 12 May 2012 23:04:17 +0200
-Subject: [PATCH 61/79] MIPS: BCM63XX: export PSI size from nvram
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/nvram.c | 11 +++++++++++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h | 2 ++
- 2 files changed, 13 insertions(+)
-
---- a/arch/mips/bcm63xx/nvram.c
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -14,6 +14,8 @@
-
- #include <bcm63xx_nvram.h>
-
-+#define BCM63XX_DEFAULT_PSI_SIZE 64
-+
- static struct bcm963xx_nvram nvram;
- static int mac_addr_used;
-
-@@ -82,3 +84,12 @@ int bcm63xx_nvram_get_mac_address(u8 *ma
- return 0;
- }
- EXPORT_SYMBOL(bcm63xx_nvram_get_mac_address);
-+
-+int bcm63xx_nvram_get_psi_size(void)
-+{
-+ if (nvram.psi_size > 0)
-+ return nvram.psi_size;
-+
-+ return BCM63XX_DEFAULT_PSI_SIZE;
-+}
-+EXPORT_SYMBOL(bcm63xx_nvram_get_psi_size);
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_nvram.h
-@@ -31,4 +31,6 @@ u8 *bcm63xx_nvram_get_name(void);
- */
- int bcm63xx_nvram_get_mac_address(u8 *mac);
-
-+int bcm63xx_nvram_get_psi_size(void);
-+
- #endif /* BCM63XX_NVRAM_H */
diff --git a/target/linux/brcm63xx/patches-3.3/430-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch b/target/linux/brcm63xx/patches-3.3/430-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch
deleted file mode 100644
index fd1bfc4b8c..0000000000
--- a/target/linux/brcm63xx/patches-3.3/430-MTD-bcm63xxpart-use-nvram-for-PSI-size.patch
+++ /dev/null
@@ -1,29 +0,0 @@
-From 658afad639a9456e1bb6fe5bba0032f3c0c3f699 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 1 May 2012 14:10:39 +0200
-Subject: [PATCH 62/79] MTD: bcm63xxpart: use nvram for PSI size
-
----
- drivers/mtd/bcm63xxpart.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -32,6 +32,7 @@
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-
-+#include <asm/mach-bcm63xx/bcm63xx_nvram.h>
- #include <linux/bcm963xx_tag.h>
- #include <asm/mach-bcm63xx/board_bcm963xx.h>
-
-@@ -90,7 +91,8 @@ static int bcm63xx_parse_cfe_partitions(
- BCM63XX_CFE_BLOCK_SIZE);
-
- cfelen = cfe_erasesize;
-- nvramlen = cfe_erasesize;
-+ nvramlen = bcm63xx_nvram_get_psi_size() * 1024;
-+ nvramlen = roundup(nvramlen, cfe_erasesize);
-
- /* Allocate memory for buffer */
- buf = vmalloc(sizeof(struct bcm_tag));
diff --git a/target/linux/brcm63xx/patches-3.3/431-MTD-physmap-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.3/431-MTD-physmap-allow-passing-pp_data.patch
deleted file mode 100644
index f869911d54..0000000000
--- a/target/linux/brcm63xx/patches-3.3/431-MTD-physmap-allow-passing-pp_data.patch
+++ /dev/null
@@ -1,41 +0,0 @@
-From 266c506f4b262bd6aba0776a03d82c98e65d9906 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 1 May 2012 17:32:36 +0200
-Subject: [PATCH 63/79] MTD: physmap: allow passing pp_data
-
----
- drivers/mtd/maps/physmap.c | 4 +++-
- include/linux/mtd/physmap.h | 1 +
- 2 files changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -84,6 +84,7 @@ static int physmap_flash_probe(struct pl
- {
- struct physmap_flash_data *physmap_data;
- struct physmap_flash_info *info;
-+ struct mtd_part_parser_data *pp_data;
- const char **probe_type;
- const char **part_types;
- int err = 0;
-@@ -173,8 +174,9 @@ static int physmap_flash_probe(struct pl
- goto err_out;
-
- part_types = physmap_data->part_probe_types ? : part_probe_types;
-+ pp_data = physmap_data->pp_data ? physmap_data->pp_data : NULL;
-
-- mtd_device_parse_register(info->cmtd, part_types, 0,
-+ mtd_device_parse_register(info->cmtd, part_types, pp_data,
- physmap_data->parts, physmap_data->nr_parts);
- return 0;
-
---- a/include/linux/mtd/physmap.h
-+++ b/include/linux/mtd/physmap.h
-@@ -32,6 +32,7 @@ struct physmap_flash_data {
- char *probe_type;
- struct mtd_partition *parts;
- const char **part_probe_types;
-+ struct mtd_part_parser_data *pp_data;
- };
-
- #endif /* __LINUX_MTD_PHYSMAP__ */
diff --git a/target/linux/brcm63xx/patches-3.3/432-BCM63XX-allow-providing-fixup-data-in-board-data.patch b/target/linux/brcm63xx/patches-3.3/432-BCM63XX-allow-providing-fixup-data-in-board-data.patch
deleted file mode 100644
index 8f04fa75c2..0000000000
--- a/target/linux/brcm63xx/patches-3.3/432-BCM63XX-allow-providing-fixup-data-in-board-data.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 5131195413b62df73dfd394fea272830ea8c4e1a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:40:03 +0200
-Subject: [PATCH 67/80] BCM63XX: allow providing fixup data in board data
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 10 +++++++++-
- arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 10 ++++++++++
- 2 files changed, 19 insertions(+), 1 deletion(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -33,6 +33,7 @@
- #include <bcm63xx_dev_usb_ehci.h>
- #include <board_bcm963xx.h>
- #include <linux/bcm963xx_tag.h>
-+#include <pci_ath9k_fixup.h>
-
- #define PFX "board_bcm963xx: "
-
-@@ -856,6 +857,7 @@ int __init board_register_devices(void)
- {
- int button_count = 0;
- int led_count = 0;
-+ int i;
-
- if (board.has_uart0)
- bcm63xx_uart_register(0);
-@@ -891,7 +893,8 @@ int __init board_register_devices(void)
- * do this after registering enet devices
- */
- #ifdef CONFIG_SSB_PCIHOST
-- if (!bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
-+ if (!board.has_caldata &&
-+ !bcm63xx_nvram_get_mac_address(bcm63xx_sprom.il0mac)) {
- memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
- if (ssb_arch_register_fallback_sprom(
-@@ -933,5 +936,9 @@ int __init board_register_devices(void)
- platform_device_register(&bcm63xx_gpio_keys_device);
- }
-
-+ /* register any fixups */
-+ for (i = 0; i < board.has_caldata; i++)
-+ pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+
- return 0;
- }
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -7,6 +7,7 @@
- #include <linux/leds.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
-+#include <pci_ath9k_fixup.h>
-
- /*
- * flash mapping
-@@ -14,6 +15,11 @@
- #define BCM963XX_CFE_VERSION_OFFSET 0x570
- #define BCM963XX_NVRAM_OFFSET 0x580
-
-+struct ath9k_caldata {
-+ unsigned int slot;
-+ u32 caldata_offset;
-+};
-+
- /*
- * board definition
- */
-@@ -32,6 +38,10 @@ struct board_info {
- unsigned int has_dsp:1;
- unsigned int has_uart0:1;
- unsigned int has_uart1:1;
-+ unsigned int has_caldata:2;
-+
-+ /* wifi calibration data config */
-+ struct ath9k_caldata caldata[2];
-
- /* ethernet config */
- struct bcm63xx_enet_platform_data enet0;
diff --git a/target/linux/brcm63xx/patches-3.3/433-MTD-m25p80-allow-passing-pp_data.patch b/target/linux/brcm63xx/patches-3.3/433-MTD-m25p80-allow-passing-pp_data.patch
deleted file mode 100644
index 5fef3f3a28..0000000000
--- a/target/linux/brcm63xx/patches-3.3/433-MTD-m25p80-allow-passing-pp_data.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From 7f17dfe9009beb07a3de0e380932a725293829df Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 1 May 2012 17:33:03 +0200
-Subject: [PATCH 64/79] MTD: m25p80: allow passing pp_data
-
----
- drivers/mtd/devices/m25p80.c | 3 +++
- include/linux/spi/flash.h | 2 ++
- 2 files changed, 5 insertions(+)
-
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -887,6 +887,9 @@ static int __devinit m25p_probe(struct s
- dev_warn(&spi->dev, "unrecognized id %s\n", data->type);
- }
-
-+ if (data && data->pp_data)
-+ memcpy(&ppdata, data->pp_data, sizeof(ppdata));
-+
- info = (void *)id->driver_data;
-
- if (info->jedec_id) {
---- a/include/linux/spi/flash.h
-+++ b/include/linux/spi/flash.h
-@@ -12,6 +12,7 @@ struct mtd_part_parser_data;
- * with chips that can't be queried for JEDEC or other IDs
- * @part_probe_types: optional list of MTD parser names to use for
- * partitioning
-+ * @pp_data: optional partition parser data.
- *
- * @max_transfer_len: option maximum read/write length limitation for
- * SPI controllers not able to transfer any length commands.
-@@ -30,6 +31,7 @@ struct flash_platform_data {
- char *type;
-
- const char **part_probe_types;
-+ struct mtd_part_parser_data *pp_data;
-
- unsigned int max_transfer_len;
- /* we'll likely add more ... use JEDEC IDs, etc */
diff --git a/target/linux/brcm63xx/patches-3.3/434-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch b/target/linux/brcm63xx/patches-3.3/434-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch
deleted file mode 100644
index 7035098202..0000000000
--- a/target/linux/brcm63xx/patches-3.3/434-MIPS-BCM63XX-store-the-flash-type-in-global-variable.patch
+++ /dev/null
@@ -1,122 +0,0 @@
-From f888824d352df894ab721a5ca067b0313500efe7 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 12:17:54 +0200
-Subject: [PATCH 38/59] MIPS: BCM63XX: store the flash type in global variable
-
----
- arch/mips/bcm63xx/dev-flash.c | 36 +++++++++++++------
- .../include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 2 +
- 2 files changed, 26 insertions(+), 12 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -25,6 +25,8 @@
- #include <bcm63xx_regs.h>
- #include <bcm63xx_io.h>
-
-+int bcm63xx_attached_flash = -1;
-+
- static struct mtd_partition mtd_partitions[] = {
- {
- .name = "cfe",
-@@ -86,20 +88,23 @@ static int __init bcm63xx_detect_flash_t
- bcm63xx_spi_flash_info[0].max_speed_hz = 16666667;
-
- if (val & STRAPBUS_6328_BOOT_SEL_SERIAL)
-- return BCM63XX_FLASH_TYPE_SERIAL;
-+ bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_SERIAL;
- else
-- return BCM63XX_FLASH_TYPE_NAND;
-+ bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_NAND;
-+ break;
- case BCM6338_CPU_ID:
- case BCM6345_CPU_ID:
- case BCM6348_CPU_ID:
- /* no way to auto detect so assume parallel */
-- return BCM63XX_FLASH_TYPE_PARALLEL;
-+ bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_PARALLEL;
-+ break;
- case BCM6358_CPU_ID:
- val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
- if (val & STRAPBUS_6358_BOOT_SEL_PARALLEL)
-- return BCM63XX_FLASH_TYPE_PARALLEL;
-+ bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_PARALLEL;
- else
-- return BCM63XX_FLASH_TYPE_SERIAL;
-+ bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_SERIAL;
-+ break;
- case BCM6362_CPU_ID:
- val = bcm_misc_readl(MISC_STRAPBUS_6362_REG);
- if (val & STRAPBUS_6362_HSSPI_CLK_FAST)
-@@ -108,9 +113,10 @@ static int __init bcm63xx_detect_flash_t
- bcm63xx_spi_flash_info[0].max_speed_hz = 20000000;
-
- if (val & STRAPBUS_6362_BOOT_SEL_SERIAL)
-- return BCM63XX_FLASH_TYPE_SERIAL;
-+ bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_SERIAL;
- else
-- return BCM63XX_FLASH_TYPE_NAND;
-+ bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_NAND;
-+ break;
- case BCM6368_CPU_ID:
- val = bcm_gpio_readl(GPIO_STRAPBUS_REG);
- if (val & STRAPBUS_6368_SPI_CLK_FAST)
-@@ -118,25 +124,32 @@ static int __init bcm63xx_detect_flash_t
-
- switch (val & STRAPBUS_6368_BOOT_SEL_MASK) {
- case STRAPBUS_6368_BOOT_SEL_NAND:
-- return BCM63XX_FLASH_TYPE_NAND;
-+ bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_NAND;
-+ break;
- case STRAPBUS_6368_BOOT_SEL_SERIAL:
-- return BCM63XX_FLASH_TYPE_SERIAL;
-+ bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_SERIAL;
-+ break;
- case STRAPBUS_6368_BOOT_SEL_PARALLEL:
-- return BCM63XX_FLASH_TYPE_PARALLEL;
-+ bcm63xx_attached_flash = BCM63XX_FLASH_TYPE_PARALLEL;
-+ break;
-+ default:
-+ return -EINVAL;
- }
- default:
- return -EINVAL;
- }
-+
-+ return 0;
- }
-
- int __init bcm63xx_flash_register(void)
- {
-- int flash_type;
- u32 val;
-
-- flash_type = bcm63xx_detect_flash_type();
-
-- switch (flash_type) {
-+ bcm63xx_detect_flash_type();
-+
-+ switch (bcm63xx_attached_flash) {
- case BCM63XX_FLASH_TYPE_PARALLEL:
- /* read base address of boot chip select (0) */
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-@@ -157,7 +170,7 @@ int __init bcm63xx_flash_register(void)
- return -ENODEV;
- default:
- pr_err("flash detection failed for BCM%x: %d\n",
-- bcm63xx_get_cpu_id(), flash_type);
-+ bcm63xx_get_cpu_id(), bcm63xx_attached_flash);
- return -ENODEV;
- }
- }
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -7,6 +7,8 @@ enum {
- BCM63XX_FLASH_TYPE_NAND,
- };
-
-+extern int bcm63xx_attached_flash;
-+
- int __init bcm63xx_flash_register(void);
-
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.3/435-BCM63XX-add-a-fixup-for-ath9k-devices.patch b/target/linux/brcm63xx/patches-3.3/435-BCM63XX-add-a-fixup-for-ath9k-devices.patch
deleted file mode 100644
index a3b30e4443..0000000000
--- a/target/linux/brcm63xx/patches-3.3/435-BCM63XX-add-a-fixup-for-ath9k-devices.patch
+++ /dev/null
@@ -1,227 +0,0 @@
-From fb6f6f58db9ae9cf27ab01f5f09cfbc5c078a7b8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:36:11 +0200
-Subject: [PATCH 66/80] BCM63XX: add a fixup for ath9k devices
-
----
- arch/mips/bcm63xx/Makefile | 2 +-
- arch/mips/bcm63xx/pci-ath9k-fixup.c | 190 ++++++++++++++++++++
- .../include/asm/mach-bcm63xx/pci_ath9k_fixup.h | 7 +
- 3 files changed, 198 insertions(+), 1 deletion(-)
- create mode 100644 arch/mips/bcm63xx/pci-ath9k-fixup.c
- create mode 100644 arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,7 @@
- obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o setup.o \
- timer.o dev-dsp.o dev-enet.o dev-flash.o dev-hsspi.o \
- dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-usb-ehci.o \
-- dev-usb-ohci.o dev-wdt.o
-+ dev-usb-ohci.o dev-wdt.o pci-ath9k-fixup.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
- obj-y += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -0,0 +1,190 @@
-+/*
-+ * Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ * Copytight (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ * Based on
-+ *
-+ * Atheros AP94 reference board PCI initialization
-+ *
-+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/ath9k_platform.h>
-+
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_nvram.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_flash.h>
-+#include <bcm63xx_dev_hsspi.h>
-+#include <pci_ath9k_fixup.h>
-+
-+struct ath9k_fixup {
-+ unsigned slot;
-+ u8 mac[ETH_ALEN];
-+ struct ath9k_platform_data pdata;
-+};
-+
-+static int ath9k_num_fixups;
-+static struct ath9k_fixup ath9k_fixups[2] = {
-+ {
-+ .slot = 255,
-+ .pdata = {
-+ .led_pin = -1,
-+ },
-+ },
-+ {
-+ .slot = 255,
-+ .pdata = {
-+ .led_pin = -1,
-+ },
-+ },
-+};
-+
-+static u16 *bcm63xx_read_eeprom(u16 *eeprom, u32 offset)
-+{
-+ u32 addr;
-+
-+ if (BCMCPU_IS_6328()) {
-+ addr = 0x18000000;
-+ } else {
-+ addr = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+ addr &= MPI_CSBASE_BASE_MASK;
-+ }
-+
-+ switch (bcm63xx_attached_flash) {
-+ case BCM63XX_FLASH_TYPE_PARALLEL:
-+ memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+ return eeprom;
-+ case BCM63XX_FLASH_TYPE_SERIAL:
-+ /* the first megabyte is memory mapped */
-+ if (offset < 0x100000) {
-+ memcpy(eeprom, (void *)KSEG1ADDR(addr + offset), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+ return eeprom;
-+ }
-+
-+ if (BCMCPU_IS_6328()) {
-+ /* we can change the memory mapped megabyte */
-+ bcm_hsspi_writel(offset & 0xf00000, 0x18);
-+ memcpy(eeprom, (void *)KSEG1ADDR(addr + (offset & 0xfffff)), ATH9K_PLAT_EEP_MAX_WORDS * sizeof(u16));
-+ bcm_hsspi_writel(0, 0x18);
-+ return eeprom;
-+ }
-+ /* can't do anything here without talking to the SPI controller. */
-+ case BCM63XX_FLASH_TYPE_NAND:
-+ default:
-+ return NULL;
-+ }
-+}
-+
-+static void ath9k_pci_fixup(struct pci_dev *dev)
-+{
-+ void __iomem *mem;
-+ struct ath9k_platform_data *pdata = NULL;
-+ u16 *cal_data = NULL;
-+ u16 cmd;
-+ u32 bar0;
-+ u32 val;
-+ unsigned i;
-+
-+ for (i = 0; i < ath9k_num_fixups; i++) {
-+ if (ath9k_fixups[i].slot != PCI_SLOT(dev->devfn))
-+ continue;
-+
-+ cal_data = ath9k_fixups[i].pdata.eeprom_data;
-+ pdata = &ath9k_fixups[i].pdata;
-+ break;
-+ }
-+
-+ if (cal_data == NULL)
-+ return;
-+
-+ if (*cal_data != 0xa55a) {
-+ pr_err("pci %s: invalid calibration data\n", pci_name(dev));
-+ return;
-+ }
-+
-+ pr_info("pci %s: fixup device configuration\n", pci_name(dev));
-+
-+ switch (bcm63xx_get_cpu_id()) {
-+ case BCM6328_CPU_ID:
-+ val = BCM_PCIE_MEM_BASE_PA;
-+ break;
-+ case BCM6348_CPU_ID:
-+ case BCM6358_CPU_ID:
-+ case BCM6368_CPU_ID:
-+ val = BCM_PCI_MEM_BASE_PA;
-+ break;
-+ default:
-+ BUG();
-+ }
-+
-+ mem = ioremap(val, 0x10000);
-+ if (!mem) {
-+ pr_err("pci %s: ioremap error\n", pci_name(dev));
-+ return;
-+ }
-+
-+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+ pci_read_config_dword(dev, PCI_BASE_ADDRESS_0, &bar0);
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, val);
-+
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+ /* set offset to first reg address */
-+ cal_data += 3;
-+ while(*cal_data != 0xffff) {
-+ u32 reg;
-+ reg = *cal_data++;
-+ val = *cal_data++;
-+ val |= (*cal_data++) << 16;
-+
-+ writel(val, mem + reg);
-+ udelay(100);
-+ }
-+
-+ pci_read_config_dword(dev, PCI_VENDOR_ID, &val);
-+ dev->vendor = val & 0xffff;
-+ dev->device = (val >> 16) & 0xffff;
-+
-+ pci_read_config_dword(dev, PCI_CLASS_REVISION, &val);
-+ dev->revision = val & 0xff;
-+ dev->class = val >> 8; /* upper 3 bytes */
-+
-+ pci_read_config_word(dev, PCI_COMMAND, &cmd);
-+ cmd &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-+ pci_write_config_word(dev, PCI_COMMAND, cmd);
-+
-+ pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, bar0);
-+
-+ iounmap(mem);
-+
-+ dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-+
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+{
-+ if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
-+ return;
-+
-+ ath9k_fixups[ath9k_num_fixups].slot = slot;
-+
-+ if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
-+ return;
-+
-+ if (bcm63xx_nvram_get_mac_address(ath9k_fixups[ath9k_num_fixups].mac))
-+ return;
-+
-+ ath9k_fixups[ath9k_num_fixups].pdata.macaddr = ath9k_fixups[ath9k_num_fixups].mac;
-+ ath9k_num_fixups++;
-+}
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -0,0 +1,7 @@
-+#ifndef _PCI_ATH9K_FIXUP
-+#define _PCI_ATH9K_FIXUP
-+
-+
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+
-+#endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-3.3/436-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch b/target/linux/brcm63xx/patches-3.3/436-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
deleted file mode 100644
index 681bab2488..0000000000
--- a/target/linux/brcm63xx/patches-3.3/436-MTD-bcm63xxpart-allow-passing-a-caldata-offset.patch
+++ /dev/null
@@ -1,118 +0,0 @@
-From 8ab86c5dc38ad4de1442e50e0adbc354d9184d71 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 1 May 2012 14:38:41 +0200
-Subject: [PATCH 68/79] MTD: bcm63xxpart: allow passing a caldata offset
-
-Allow bcm63xxpart to receive a caldata offset if calibration data is
-contained in flash.
----
- drivers/mtd/bcm63xxpart.c | 47 ++++++++++++++++++++++++++++++++++++++--
- include/linux/mtd/partitions.h | 2 ++
- 2 files changed, 47 insertions(+), 2 deletions(-)
-
---- a/drivers/mtd/bcm63xxpart.c
-+++ b/drivers/mtd/bcm63xxpart.c
-@@ -80,6 +80,8 @@ static int bcm63xx_parse_cfe_partitions(
- unsigned int rootfslen, kernellen, sparelen, totallen;
- unsigned int cfelen, nvramlen;
- unsigned int cfe_erasesize;
-+ unsigned int caldatalen1 = 0, caldataaddr1 = 0;
-+ unsigned int caldatalen2 = 0, caldataaddr2 = 0;
- int i;
- u32 computed_crc;
- bool rootfs_first = false;
-@@ -94,6 +96,23 @@ static int bcm63xx_parse_cfe_partitions(
- nvramlen = bcm63xx_nvram_get_psi_size() * 1024;
- nvramlen = roundup(nvramlen, cfe_erasesize);
-
-+ if (data) {
-+ if (data->caldata[0]) {
-+ caldatalen1 = cfe_erasesize;
-+ caldataaddr1 = rounddown(data->caldata[0],
-+ cfe_erasesize);
-+ }
-+ if (data->caldata[1]) {
-+ caldatalen2 = cfe_erasesize;
-+ caldataaddr2 = rounddown(data->caldata[1],
-+ cfe_erasesize);
-+ }
-+ if (caldataaddr1 == caldataaddr2) {
-+ caldataaddr2 = 0;
-+ caldatalen2 = 0;
-+ }
-+ }
-+
- /* Allocate memory for buffer */
- buf = vmalloc(sizeof(struct bcm_tag));
- if (!buf)
-@@ -144,7 +163,7 @@ static int bcm63xx_parse_cfe_partitions(
- rootfsaddr = 0;
- spareaddr = cfelen;
- }
-- sparelen = master->size - spareaddr - nvramlen;
-+ sparelen = master->size - spareaddr - nvramlen - caldatalen1 - caldatalen2;
-
- /* Determine number of partitions */
- if (rootfslen > 0)
-@@ -153,6 +172,12 @@ static int bcm63xx_parse_cfe_partitions(
- if (kernellen > 0)
- nrparts++;
-
-+ if (caldatalen1 > 0)
-+ nrparts++;
-+
-+ if (caldatalen2 > 0)
-+ nrparts++;
-+
- /* Ask kernel for more memory */
- parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL);
- if (!parts) {
-@@ -190,6 +215,23 @@ static int bcm63xx_parse_cfe_partitions(
- curpart++;
- }
-
-+ if (caldatalen1 > 0) {
-+ if (caldatalen2 > 0)
-+ parts[curpart].name = "cal_data1";
-+ else
-+ parts[curpart].name = "cal_data";
-+ parts[curpart].offset = caldataaddr1;
-+ parts[curpart].size = caldatalen1;
-+ curpart++;
-+ }
-+
-+ if (caldatalen2 > 0) {
-+ parts[curpart].name = "cal_data2";
-+ parts[curpart].offset = caldataaddr2;
-+ parts[curpart].size = caldatalen2;
-+ curpart++;
-+ }
-+
- parts[curpart].name = "nvram";
- parts[curpart].offset = master->size - nvramlen;
- parts[curpart].size = nvramlen;
-@@ -198,7 +240,8 @@ static int bcm63xx_parse_cfe_partitions(
- /* Global partition "linux" to make easy firmware upgrade */
- parts[curpart].name = "linux";
- parts[curpart].offset = cfelen;
-- parts[curpart].size = master->size - cfelen - nvramlen;
-+ parts[curpart].size = master->size - cfelen - nvramlen
-+ - caldatalen1 - caldatalen2;
-
- for (i = 0; i < nrparts; i++)
- pr_info("Partition %d is %s offset %llx and length %llx\n", i,
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -58,10 +58,12 @@ struct device_node;
- /**
- * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
- * @origin: for RedBoot, start address of MTD device
-+ * @caldata: for CFE, start address of wifi calibration data
- * @of_node: for OF parsers, device node containing partitioning information
- */
- struct mtd_part_parser_data {
- unsigned long origin;
-+ unsigned long caldata[2];
- struct device_node *of_node;
- };
-
diff --git a/target/linux/brcm63xx/patches-3.3/437-MIPS-BCM63XX-pass-caldata-info-to-flash.patch b/target/linux/brcm63xx/patches-3.3/437-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
deleted file mode 100644
index 541efd2eb1..0000000000
--- a/target/linux/brcm63xx/patches-3.3/437-MIPS-BCM63XX-pass-caldata-info-to-flash.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From 977f8a30103b9c4992cab8f49357fe0d4274004f Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 3 May 2012 14:55:26 +0200
-Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 2 +-
- arch/mips/bcm63xx/dev-flash.c | 9 ++++++++-
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h | 4 +++-
- 3 files changed, 12 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -912,7 +912,7 @@ int __init board_register_devices(void)
- if (board.num_spis)
- spi_register_board_info(board.spis, board.num_spis);
-
-- bcm63xx_flash_register();
-+ bcm63xx_flash_register(board.has_caldata, board.caldata);
-
- /* count number of LEDs defined by this device */
- while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -35,12 +35,15 @@ static struct mtd_partition mtd_partitio
- }
- };
-
-+static struct mtd_part_parser_data bcm63xx_parser_data;
-+
- static const char *bcm63xx_part_types[] = { "bcm63xxpart", "RedBoot", NULL };
-
- static struct physmap_flash_data flash_data = {
- .width = 2,
- .parts = mtd_partitions,
- .part_probe_types = bcm63xx_part_types,
-+ .pp_data = &bcm63xx_parser_data,
- };
-
- static struct resource mtd_resources[] = {
-@@ -62,6 +65,7 @@ static struct platform_device mtd_dev =
-
- static struct flash_platform_data bcm63xx_flash_data = {
- .part_probe_types = bcm63xx_part_types,
-+ .pp_data = &bcm63xx_parser_data,
- };
-
- static struct spi_board_info bcm63xx_spi_flash_info[] = {
-@@ -142,10 +146,13 @@ static int __init bcm63xx_detect_flash_t
- return 0;
- }
-
--int __init bcm63xx_flash_register(void)
-+int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
- {
- u32 val;
-+ unsigned int i;
-
-+ for (i = 0; i < num_caldata; i++)
-+ bcm63xx_parser_data.caldata[i] = caldata[i].caldata_offset;
-
- bcm63xx_detect_flash_type();
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -1,6 +1,8 @@
- #ifndef __BCM63XX_FLASH_H
- #define __BCM63XX_FLASH_H
-
-+#include <board_bcm963xx.h>
-+
- enum {
- BCM63XX_FLASH_TYPE_PARALLEL,
- BCM63XX_FLASH_TYPE_SERIAL,
-@@ -9,6 +11,6 @@ enum {
-
- extern int bcm63xx_attached_flash;
-
--int __init bcm63xx_flash_register(void);
-+int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
-
- #endif /* __BCM63XX_FLASH_H */
diff --git a/target/linux/brcm63xx/patches-3.3/438-MIPS-BCM63XX-enable-USB-for-BCM6328.patch b/target/linux/brcm63xx/patches-3.3/438-MIPS-BCM63XX-enable-USB-for-BCM6328.patch
deleted file mode 100644
index 54673dcf31..0000000000
--- a/target/linux/brcm63xx/patches-3.3/438-MIPS-BCM63XX-enable-USB-for-BCM6328.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 38c3f8d21da90f0833578a157e22ddabf4d576bd Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 12 Feb 2012 14:28:34 +0100
-Subject: [PATCH 48/84] MIPS: BCM63XX: enable USB for BCM6328
-
-The USB controller is the same as the one on BCM6368.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/dev-usb-ehci.c | 2 +-
- arch/mips/bcm63xx/dev-usb-ohci.c | 3 ++-
- drivers/usb/host/ehci-bcm63xx.c | 2 +-
- drivers/usb/host/ohci-bcm63xx.c | 2 +-
- 4 files changed, 5 insertions(+), 4 deletions(-)
-
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -39,7 +39,7 @@ static struct platform_device bcm63xx_eh
-
- int __init bcm63xx_ehci_register(void)
- {
-- if (!BCMCPU_IS_6358() && !BCMCPU_IS_6368())
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6368())
- return 0;
-
- ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
---- a/arch/mips/bcm63xx/dev-usb-ohci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -39,7 +39,8 @@ static struct platform_device bcm63xx_oh
-
- int __init bcm63xx_ohci_register(void)
- {
-- if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358() && !BCMCPU_IS_6368())
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6348() && !BCMCPU_IS_6358() &&
-+ !BCMCPU_IS_6368())
- return 0;
-
- ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
---- a/drivers/usb/host/ehci-bcm63xx.c
-+++ b/drivers/usb/host/ehci-bcm63xx.c
-@@ -99,7 +99,7 @@ static int __devinit ehci_hcd_bcm63xx_dr
- bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
- USBH_PRIV_TEST_6358_REG);
-
-- } else if (BCMCPU_IS_6368()) {
-+ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) {
-
- reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
- reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
---- a/drivers/usb/host/ohci-bcm63xx.c
-+++ b/drivers/usb/host/ohci-bcm63xx.c
-@@ -94,7 +94,7 @@ static int __devinit ohci_hcd_bcm63xx_dr
- bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
- USBH_PRIV_TEST_6358_REG);
-
-- } else if (BCMCPU_IS_6368()) {
-+ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) {
- reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
- reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
- reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
diff --git a/target/linux/brcm63xx/patches-3.3/439-MIPS-BCM63XX-wire-up-the-HS-SPI-controller-for-BCM63.patch b/target/linux/brcm63xx/patches-3.3/439-MIPS-BCM63XX-wire-up-the-HS-SPI-controller-for-BCM63.patch
deleted file mode 100644
index 7561569188..0000000000
--- a/target/linux/brcm63xx/patches-3.3/439-MIPS-BCM63XX-wire-up-the-HS-SPI-controller-for-BCM63.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From ed225910f0e062d9c28d5cf216f97b3cf457a8c5 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 21 Nov 2011 00:55:49 +0100
-Subject: [PATCH 58/81] MIPS: BCM63XX: wire up the HS SPI controller for BCM6362
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/clk.c | 2 ++
- arch/mips/bcm63xx/dev-hsspi.c | 7 +++++--
- .../include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h | 1 +
- 3 files changed, 8 insertions(+), 2 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -218,6 +218,8 @@ static void hsspi_set(struct clk *clk, i
-
- if (BCMCPU_IS_6328())
- mask = CKCTL_6328_HSSPI_EN;
-+ else if (BCMCPU_IS_6362())
-+ mask = CKCTL_6362_HSSPI_EN;
- else
- return;
-
---- a/arch/mips/bcm63xx/dev-hsspi.c
-+++ b/arch/mips/bcm63xx/dev-hsspi.c
-@@ -43,7 +43,7 @@ static struct platform_device bcm63xx_hs
- int __init bcm63xx_hsspi_register(void)
- {
-
-- if (!BCMCPU_IS_6328())
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362())
- return -ENODEV;
-
- spi_resources[0].start = bcm63xx_regset_address(RSET_HSSPI);
-@@ -51,7 +51,10 @@ int __init bcm63xx_hsspi_register(void)
- spi_resources[0].end += RSET_HSSPI_SIZE - 1;
- spi_resources[1].start = bcm63xx_get_irq_number(IRQ_HSSPI);
-
-- spi_pdata.speed_hz = HSSPI_PLL_HZ_6328;
-+ if (BCMCPU_IS_6328())
-+ spi_pdata.speed_hz = HSSPI_PLL_HZ_6328;
-+ else
-+ spi_pdata.speed_hz = HSSPI_PLL_HZ;
-
- return platform_device_register(&bcm63xx_hsspi_device);
- }
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_hsspi.h
-@@ -16,6 +16,7 @@ struct bcm63xx_hsspi_pdata {
- #define bcm_hsspi_writel(v, o) bcm_rset_writel(RSET_HSSPI, (v), (o))
-
- #define HSSPI_PLL_HZ_6328 133333333
-+#define HSSPI_PLL_HZ 400000000
-
- #define HSSPI_BUFFER_LEN 512
-
diff --git a/target/linux/brcm63xx/patches-3.3/440-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.3/440-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch
deleted file mode 100644
index f1f1342864..0000000000
--- a/target/linux/brcm63xx/patches-3.3/440-MIPS-BCM63XX-enable-SPI-controller-for-BCM6362.patch
+++ /dev/null
@@ -1,101 +0,0 @@
-From eef84812bc7ffd590da6ad6b83bfeebaa43a7055 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 5 Jul 2012 21:19:20 +0200
-Subject: [PATCH 58/84] MIPS: BCM63XX: enable SPI controller for BCM6362
-
----
- arch/mips/bcm63xx/clk.c | 2 ++
- arch/mips/bcm63xx/dev-spi.c | 11 ++++++++++-
- .../include/asm/mach-bcm63xx/bcm63xx_dev_spi.h | 3 +++
- arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h | 16 ++++++++++++++++
- 4 files changed, 31 insertions(+), 1 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -199,6 +199,8 @@ static void spi_set(struct clk *clk, int
- mask = CKCTL_6348_SPI_EN;
- else if (BCMCPU_IS_6358())
- mask = CKCTL_6358_SPI_EN;
-+ else if (BCMCPU_IS_6362())
-+ mask = CKCTL_6362_SPI_EN;
- else
- /* BCMCPU_IS_6368 */
- mask = CKCTL_6368_SPI_EN;
---- a/arch/mips/bcm63xx/dev-spi.c
-+++ b/arch/mips/bcm63xx/dev-spi.c
-@@ -34,6 +34,10 @@ static const unsigned long bcm6358_regs_
- __GEN_SPI_REGS_TABLE(6358)
- };
-
-+static const unsigned long bcm6362_regs_spi[] = {
-+ __GEN_SPI_REGS_TABLE(6362)
-+};
-+
- static const unsigned long bcm6368_regs_spi[] = {
- __GEN_SPI_REGS_TABLE(6368)
- };
-@@ -49,6 +53,8 @@ static __init void bcm63xx_spi_regs_init
- bcm63xx_regs_spi = bcm6348_regs_spi;
- if (BCMCPU_IS_6358())
- bcm63xx_regs_spi = bcm6358_regs_spi;
-+ if (BCMCPU_IS_6362())
-+ bcm63xx_regs_spi = bcm6362_regs_spi;
- if (BCMCPU_IS_6368())
- bcm63xx_regs_spi = bcm6368_regs_spi;
- }
-@@ -99,6 +105,9 @@ int __init bcm63xx_spi_register(void)
- /* Set bus frequency */
- spi_pdata.speed_hz = clk_get_rate(periph_clk);
-
-+ if (BCMCPU_IS_6362())
-+ spi_pdata.bus_num = 1;
-+
- spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
- spi_resources[0].end = spi_resources[0].start;
- spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
-@@ -110,7 +119,7 @@ int __init bcm63xx_spi_register(void)
- spi_pdata.msg_ctl_width = SPI_6338_MSG_CTL_WIDTH;
- }
-
-- if (BCMCPU_IS_6358() || BCMCPU_IS_6368()) {
-+ if (BCMCPU_IS_6358() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
- spi_resources[0].end += BCM_6358_RSET_SPI_SIZE - 1;
- spi_pdata.fifo_size = SPI_6358_MSG_DATA_SIZE;
- spi_pdata.msg_type_shift = SPI_6358_MSG_TYPE_SHIFT;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
-@@ -81,6 +81,9 @@ static inline unsigned long bcm63xx_spir
- #ifdef CONFIG_BCM63XX_CPU_6358
- __GEN_SPI_RSET(6358)
- #endif
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+ __GEN_SPI_RSET(6362)
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6368
- __GEN_SPI_RSET(6368)
- #endif
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -1223,6 +1223,22 @@
- #define SPI_6358_MSG_TAIL 0x709
- #define SPI_6358_RX_TAIL 0x70B
-
-+/* BCM 6362 SPI core */
-+#define SPI_6362_MSG_CTL 0x00 /* 16-bits register */
-+#define SPI_6362_MSG_DATA 0x02
-+#define SPI_6362_MSG_DATA_SIZE 0x21e
-+#define SPI_6362_RX_DATA 0x400
-+#define SPI_6362_RX_DATA_SIZE 0x220
-+#define SPI_6362_CMD 0x700 /* 16-bits register */
-+#define SPI_6362_INT_STATUS 0x702
-+#define SPI_6362_INT_MASK_ST 0x703
-+#define SPI_6362_INT_MASK 0x704
-+#define SPI_6362_ST 0x705
-+#define SPI_6362_CLK_CFG 0x706
-+#define SPI_6362_FILL_BYTE 0x707
-+#define SPI_6362_MSG_TAIL 0x709
-+#define SPI_6362_RX_TAIL 0x70B
-+
- /* BCM 6358 SPI core */
- #define SPI_6368_MSG_CTL 0x00 /* 16-bits register */
- #define SPI_6368_MSG_CTL_WIDTH 16
diff --git a/target/linux/brcm63xx/patches-3.3/441-MIPS-BCM63XX-enable-USB-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.3/441-MIPS-BCM63XX-enable-USB-for-BCM6362.patch
deleted file mode 100644
index 04d540ffb9..0000000000
--- a/target/linux/brcm63xx/patches-3.3/441-MIPS-BCM63XX-enable-USB-for-BCM6362.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From fb9e98936590637c26b66d60137a7b44b329a254 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 12 Feb 2012 14:40:56 +0100
-Subject: [PATCH 59/84] MIPS: BCM63XX: enable USB for BCM6362
-
-BCM6362 has the same USB controller as BCM6368.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- arch/mips/bcm63xx/Kconfig | 2 ++
- arch/mips/bcm63xx/clk.c | 4 ++++
- arch/mips/bcm63xx/dev-usb-ehci.c | 3 ++-
- arch/mips/bcm63xx/dev-usb-ohci.c | 2 +-
- drivers/usb/host/ehci-bcm63xx.c | 2 +-
- drivers/usb/host/ohci-bcm63xx.c | 2 +-
- 6 files changed, 11 insertions(+), 4 deletions(-)
-
---- a/arch/mips/bcm63xx/Kconfig
-+++ b/arch/mips/bcm63xx/Kconfig
-@@ -27,6 +27,8 @@ config BCM63XX_CPU_6358
- config BCM63XX_CPU_6362
- bool "support 6362 CPU"
- select HW_HAS_PCI
-+ select USB_ARCH_HAS_OHCI if USB_SUPPORT
-+ select USB_ARCH_HAS_EHCI if USB_SUPPORT
-
- config BCM63XX_CPU_6368
- bool "support 6368 CPU"
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -178,6 +178,8 @@ static void usbh_set(struct clk *clk, in
- {
- if (BCMCPU_IS_6348())
- bcm_hwclock_set(CKCTL_6348_USBH_EN, enable);
-+ else if (BCMCPU_IS_6362())
-+ bcm_hwclock_set(CKCTL_6362_USBH_EN, enable);
- else if (BCMCPU_IS_6368())
- bcm_hwclock_set(CKCTL_6368_USBH_EN, enable);
- }
---- a/arch/mips/bcm63xx/dev-usb-ehci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ehci.c
-@@ -39,7 +39,8 @@ static struct platform_device bcm63xx_eh
-
- int __init bcm63xx_ehci_register(void)
- {
-- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6368())
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6358() && !BCMCPU_IS_6362() &&
-+ !BCMCPU_IS_6368())
- return 0;
-
- ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0);
---- a/arch/mips/bcm63xx/dev-usb-ohci.c
-+++ b/arch/mips/bcm63xx/dev-usb-ohci.c
-@@ -40,7 +40,7 @@ static struct platform_device bcm63xx_oh
- int __init bcm63xx_ohci_register(void)
- {
- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6348() && !BCMCPU_IS_6358() &&
-- !BCMCPU_IS_6368())
-+ !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
- return 0;
-
- ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0);
---- a/drivers/usb/host/ehci-bcm63xx.c
-+++ b/drivers/usb/host/ehci-bcm63xx.c
-@@ -99,7 +99,7 @@ static int __devinit ehci_hcd_bcm63xx_dr
- bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
- USBH_PRIV_TEST_6358_REG);
-
-- } else if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) {
-+ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
-
- reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
- reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK;
---- a/drivers/usb/host/ohci-bcm63xx.c
-+++ b/drivers/usb/host/ohci-bcm63xx.c
-@@ -94,7 +94,7 @@ static int __devinit ohci_hcd_bcm63xx_dr
- bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
- USBH_PRIV_TEST_6358_REG);
-
-- } else if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) {
-+ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368()) {
- reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
- reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
- reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
diff --git a/target/linux/brcm63xx/patches-3.3/442-MIPS-BCM63XX-enable-enetsw-for-BCM6362.patch b/target/linux/brcm63xx/patches-3.3/442-MIPS-BCM63XX-enable-enetsw-for-BCM6362.patch
deleted file mode 100644
index ae46ec4061..0000000000
--- a/target/linux/brcm63xx/patches-3.3/442-MIPS-BCM63XX-enable-enetsw-for-BCM6362.patch
+++ /dev/null
@@ -1,77 +0,0 @@
-From bf9d506bd144b95f8bb4127350ab2db5fba9c12e Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Sun, 8 Jul 2012 21:07:12 +0200
-Subject: [PATCH 60/84] MIPS: BCM63XX: enable enetsw for BCM6362
-
----
- arch/mips/bcm63xx/clk.c | 7 ++++++-
- arch/mips/bcm63xx/dev-enet.c | 6 ++++--
- .../include/asm/mach-bcm63xx/bcm63xx_dev_enet.h | 1 +
- 3 files changed, 11 insertions(+), 3 deletions(-)
-
---- a/arch/mips/bcm63xx/clk.c
-+++ b/arch/mips/bcm63xx/clk.c
-@@ -120,11 +120,13 @@ static void enetsw_set(struct clk *clk,
- {
- u32 mask;
-
-- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
- return;
-
- if (BCMCPU_IS_6328())
- mask = CKCTL_6328_ROBOSW_EN;
-+ else if (BCMCPU_IS_6362())
-+ mask = CKCTL_6362_ROBOSW_EN;
- else
- mask = CKCTL_6368_ROBOSW_EN | CKCTL_6368_SWPKT_USB_EN |
- CKCTL_6368_SWPKT_SAR_EN;
-@@ -137,6 +139,9 @@ static void enetsw_set(struct clk *clk,
- if (BCMCPU_IS_6328()) {
- reg = PERF_SOFTRESET_6328_REG;
- mask = SOFTRESET_6328_ENETSW_MASK;
-+ } else if (BCMCPU_IS_6362()) {
-+ reg = PERF_SOFTRESET_6362_REG;
-+ mask = SOFTRESET_6362_ENETSW_MASK;
- } else {
- reg = PERF_SOFTRESET_6368_REG;
- mask = SOFTRESET_6368_ENETSW_MASK;
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -141,7 +141,7 @@ static int __init register_shared(void)
- shared_res[0].end = shared_res[0].start;
- shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
-
-- if (BCMCPU_IS_6328() || BCMCPU_IS_6368())
-+ if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
- chan_count = 32;
- else
- chan_count = 16;
-@@ -224,7 +224,7 @@ bcm63xx_enetsw_register(const struct bcm
- {
- int ret;
-
-- if (!BCMCPU_IS_6328() && !BCMCPU_IS_6368())
-+ if (!BCMCPU_IS_6328() && !BCMCPU_IS_6362() && !BCMCPU_IS_6368())
- return -ENODEV;
-
- ret = register_shared();
-@@ -243,6 +243,8 @@ bcm63xx_enetsw_register(const struct bcm
-
- if (BCMCPU_IS_6328())
- enetsw_pd.num_ports = ENETSW_PORTS_6328;
-+ else if (BCMCPU_IS_6362())
-+ enetsw_pd.num_ports = ENETSW_PORTS_6362;
- else if (BCMCPU_IS_6368())
- enetsw_pd.num_ports = ENETSW_PORTS_6368;
-
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -44,6 +44,7 @@ struct bcm63xx_enet_platform_data {
- */
- #define ENETSW_MAX_PORT 6
- #define ENETSW_PORTS_6328 5 /* 4 FE PHY + 1 RGMII */
-+#define ENETSW_PORTS_6362 6 /* 4 FE PHY + 2 RGMII */
- #define ENETSW_PORTS_6368 6 /* 4 FE PHY + 2 RGMII */
-
- #define ENETSW_RGMII_PORT0 4
diff --git a/target/linux/brcm63xx/patches-3.3/443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch b/target/linux/brcm63xx/patches-3.3/443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
deleted file mode 100644
index 5ffbe7389d..0000000000
--- a/target/linux/brcm63xx/patches-3.3/443-MIPS-BCM63XX-enable-enet-for-BCM6345.patch
+++ /dev/null
@@ -1,795 +0,0 @@
-[PATCH] MIPS: BCM63XX: enable ethernet for BCM6345
-
-BCM6345 has a slightly older DMA engine which is not supported by default by
-the bcm63xx_enet driver. This patch adds the missing Ethernet DMA definitions
-as well as patches all the places in the ethernet driver were the DMA
-reading/writing is different.
-
-Signed-off-by: Florian Fainelli <florian@openwrt.org>
----
---- a/arch/mips/bcm63xx/dev-enet.c
-+++ b/arch/mips/bcm63xx/dev-enet.c
-@@ -9,10 +9,44 @@
- #include <linux/init.h>
- #include <linux/kernel.h>
- #include <linux/platform_device.h>
-+#include <linux/export.h>
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_io.h>
- #include <bcm63xx_regs.h>
-
-+#ifdef BCMCPU_RUNTIME_DETECT
-+static const unsigned long bcm6xxx_regs_enetdmac[] = {
-+ [ENETDMAC_CHANCFG] = ENETDMAC_CHANCFG_REG,
-+ [ENETDMAC_IR] = ENETDMAC_IR_REG,
-+ [ENETDMAC_IRMASK] = ENETDMAC_IRMASK_REG,
-+ [ENETDMAC_MAXBURST] = ENETDMAC_MAXBURST_REG,
-+};
-+
-+static const unsigned long bcm6345_regs_enetdmac[] = {
-+ [ENETDMAC_CHANCFG] = ENETDMA_6345_CHANCFG_REG,
-+ [ENETDMAC_IR] = ENETDMA_6345_IR_REG,
-+ [ENETDMAC_IRMASK] = ENETDMA_6345_IRMASK_REG,
-+ [ENETDMAC_MAXBURST] = ENETDMA_6345_MAXBURST_REG,
-+ [ENETDMAC_BUFALLOC] = ENETDMA_6345_BUFALLOC_REG,
-+ [ENETDMAC_RSTART] = ENETDMA_6345_RSTART_REG,
-+ [ENETDMAC_FC] = ENETDMA_6345_FC_REG,
-+ [ENETDMAC_LEN] = ENETDMA_6345_LEN_REG,
-+};
-+
-+const unsigned long *bcm63xx_regs_enetdmac;
-+EXPORT_SYMBOL(bcm63xx_regs_enetdmac);
-+
-+static __init void bcm63xx_enetdmac_regs_init(void)
-+{
-+ if (BCMCPU_IS_6345())
-+ bcm63xx_regs_enetdmac = bcm6345_regs_enetdmac;
-+ else
-+ bcm63xx_regs_enetdmac = bcm6xxx_regs_enetdmac;
-+}
-+#else
-+static __init void bcm63xx_enetdmac_regs_init(void) { }
-+#endif
-+
- static struct resource shared_res[] = {
- {
- .start = -1, /* filled at runtime */
-@@ -137,12 +171,19 @@ static int __init register_shared(void)
- if (shared_device_registered)
- return 0;
-
-+ bcm63xx_enetdmac_regs_init();
-+
- shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA);
- shared_res[0].end = shared_res[0].start;
-- shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
-+ if (BCMCPU_IS_6345())
-+ shared_res[0].end += (RSET_6345_ENETDMA_SIZE) - 1;
-+ else
-+ shared_res[0].end += (RSET_ENETDMA_SIZE) - 1;
-
- if (BCMCPU_IS_6328() || BCMCPU_IS_6362() || BCMCPU_IS_6368())
- chan_count = 32;
-+ else if (BCMCPU_IS_6345())
-+ chan_count = 8;
- else
- chan_count = 16;
-
-@@ -172,7 +213,7 @@ int __init bcm63xx_enet_register(int uni
- if (unit > 1)
- return -ENODEV;
-
-- if (unit == 1 && BCMCPU_IS_6338())
-+ if (unit == 1 && (BCMCPU_IS_6338() || BCMCPU_IS_6345()))
- return -ENODEV;
-
- ret = register_shared();
-@@ -213,6 +254,20 @@ int __init bcm63xx_enet_register(int uni
- dpd->phy_interrupt = bcm63xx_get_irq_number(IRQ_ENET_PHY);
- }
-
-+ dpd->dma_chan_en_mask = ENETDMAC_CHANCFG_EN_MASK;
-+ dpd->dma_chan_int_mask = ENETDMAC_IR_PKTDONE_MASK;
-+ if (BCMCPU_IS_6345()) {
-+ dpd->dma_chan_en_mask |= ENETDMAC_CHANCFG_CHAINING_MASK;
-+ dpd->dma_chan_en_mask |= ENETDMAC_CHANCFG_WRAP_EN_MASK;
-+ dpd->dma_chan_en_mask |= ENETDMAC_CHANCFG_FLOWC_EN_MASK;
-+ dpd->dma_chan_int_mask |= ENETDMA_IR_BUFDONE_MASK;
-+ dpd->dma_chan_int_mask |= ENETDMA_IR_NOTOWNER_MASK;
-+ dpd->dma_chan_width = ENETDMA_6345_CHAN_WIDTH;
-+ dpd->dma_no_sram = 1;
-+ dpd->dma_desc_shift = ENETDMA_6345_DESC_SHIFT;
-+ } else
-+ dpd->dma_chan_width = ENETDMA_CHAN_WIDTH;
-+
- ret = platform_device_register(pdev);
- if (ret)
- return ret;
-@@ -248,6 +303,10 @@ bcm63xx_enetsw_register(const struct bcm
- else if (BCMCPU_IS_6368())
- enetsw_pd.num_ports = ENETSW_PORTS_6368;
-
-+ enetsw_pd.dma_chan_width = ENETDMA_CHAN_WIDTH;
-+ enetsw_pd.dma_chan_en_mask = ENETDMAC_CHANCFG_EN_MASK;
-+ enetsw_pd.dma_chan_int_mask = ENETDMAC_IR_PKTDONE_MASK;
-+
- ret = platform_device_register(&bcm63xx_enetsw_device);
- if (ret)
- return ret;
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h
-@@ -715,6 +715,8 @@
- /*************************************************************************
- * _REG relative to RSET_ENETDMA
- *************************************************************************/
-+#define ENETDMA_CHAN_WIDTH 0x10
-+#define ENETDMA_6345_CHAN_WIDTH 0x40
-
- /* Controller Configuration Register */
- #define ENETDMA_CFG_REG (0x0)
-@@ -764,29 +766,54 @@
- /* State Ram Word 4 */
- #define ENETDMA_SRAM4_REG(x) (0x20c + (x) * 0x10)
-
-+/* Broadcom 6345 ENET DMA definitions */
-+#define ENETDMA_6345_CHANCFG_REG (0x00)
-+
-+#define ENETDMA_6345_MAXBURST_REG (0x04)
-+
-+#define ENETDMA_6345_RSTART_REG (0x08)
-+
-+#define ENETDMA_6345_LEN_REG (0x0C)
-+
-+#define ENETDMA_6345_IR_REG (0x14)
-+
-+#define ENETDMA_6345_IRMASK_REG (0x18)
-+
-+#define ENETDMA_6345_FC_REG (0x1C)
-+
-+#define ENETDMA_6345_BUFALLOC_REG (0x20)
-+
-+/* Shift down for EOP, SOP and WRAP bits */
-+#define ENETDMA_6345_DESC_SHIFT (3)
-
- /*************************************************************************
- * _REG relative to RSET_ENETDMAC
- *************************************************************************/
-
- /* Channel Configuration register */
--#define ENETDMAC_CHANCFG_REG(x) ((x) * 0x10)
-+#define ENETDMAC_CHANCFG_REG (0x0)
- #define ENETDMAC_CHANCFG_EN_SHIFT 0
- #define ENETDMAC_CHANCFG_EN_MASK (1 << ENETDMA_CHANCFG_EN_SHIFT)
- #define ENETDMAC_CHANCFG_PKTHALT_SHIFT 1
- #define ENETDMAC_CHANCFG_PKTHALT_MASK (1 << ENETDMA_CHANCFG_PKTHALT_SHIFT)
-+#define ENETDMAC_CHANCFG_CHAINING_SHIFT 2
-+#define ENETDMAC_CHANCFG_CHAINING_MASK (1 << ENETDMAC_CHANCFG_CHAINING_SHIFT)
-+#define ENETDMAC_CHANCFG_WRAP_EN_SHIFT 3
-+#define ENETDMAC_CHANCFG_WRAP_EN_MASK (1 << ENETDMAC_CHANCFG_WRAP_EN_SHIFT)
-+#define ENETDMAC_CHANCFG_FLOWC_EN_SHIFT 4
-+#define ENETDMAC_CHANCFG_FLOWC_EN_MASK (1 << ENETDMAC_CHANCFG_FLOWC_EN_SHIFT)
-
- /* Interrupt Control/Status register */
--#define ENETDMAC_IR_REG(x) (0x4 + (x) * 0x10)
-+#define ENETDMAC_IR_REG (0x4)
- #define ENETDMAC_IR_BUFDONE_MASK (1 << 0)
- #define ENETDMAC_IR_PKTDONE_MASK (1 << 1)
- #define ENETDMAC_IR_NOTOWNER_MASK (1 << 2)
-
- /* Interrupt Mask register */
--#define ENETDMAC_IRMASK_REG(x) (0x8 + (x) * 0x10)
-+#define ENETDMAC_IRMASK_REG (0x8)
-
- /* Maximum Burst Length */
--#define ENETDMAC_MAXBURST_REG(x) (0xc + (x) * 0x10)
-+#define ENETDMAC_MAXBURST_REG (0xc)
-
-
- /*************************************************************************
-@@ -794,16 +821,16 @@
- *************************************************************************/
-
- /* Ring Start Address register */
--#define ENETDMAS_RSTART_REG(x) ((x) * 0x10)
-+#define ENETDMAS_RSTART_REG (0x0)
-
- /* State Ram Word 2 */
--#define ENETDMAS_SRAM2_REG(x) (0x4 + (x) * 0x10)
-+#define ENETDMAS_SRAM2_REG (0x4)
-
- /* State Ram Word 3 */
--#define ENETDMAS_SRAM3_REG(x) (0x8 + (x) * 0x10)
-+#define ENETDMAS_SRAM3_REG (0x8)
-
- /* State Ram Word 4 */
--#define ENETDMAS_SRAM4_REG(x) (0xc + (x) * 0x10)
-+#define ENETDMAS_SRAM4_REG (0xc)
-
-
- /*************************************************************************
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c
-@@ -115,26 +115,28 @@ static inline void enet_dma_writel(struc
- bcm_writel(val, bcm_enet_shared_base[0] + off);
- }
-
--static inline u32 enet_dmac_readl(struct bcm_enet_priv *priv, u32 off)
-+static inline u32 enet_dmac_readl(struct bcm_enet_priv *priv, u32 off, int chan)
- {
-- return bcm_readl(bcm_enet_shared_base[1] + off);
-+ return bcm_readl(bcm_enet_shared_base[1] +
-+ (bcm63xx_enetdmacreg(off) + (chan * priv->dma_chan_width)));
- }
-
- static inline void enet_dmac_writel(struct bcm_enet_priv *priv,
-- u32 val, u32 off)
-+ u32 val, u32 off, int chan)
- {
-- bcm_writel(val, bcm_enet_shared_base[1] + off);
-+ bcm_writel(val, bcm_enet_shared_base[1] +
-+ (bcm63xx_enetdmacreg(off) + (chan * priv->dma_chan_width)));
- }
-
--static inline u32 enet_dmas_readl(struct bcm_enet_priv *priv, u32 off)
-+static inline u32 enet_dmas_readl(struct bcm_enet_priv *priv, u32 off, int chan)
- {
-- return bcm_readl(bcm_enet_shared_base[2] + off);
-+ return bcm_readl(bcm_enet_shared_base[2] + (off + (chan * priv->dma_chan_width)));
- }
-
- static inline void enet_dmas_writel(struct bcm_enet_priv *priv,
-- u32 val, u32 off)
-+ u32 val, u32 off, int chan)
- {
-- bcm_writel(val, bcm_enet_shared_base[2] + off);
-+ bcm_writel(val, bcm_enet_shared_base[2] + (off + (chan * priv->dma_chan_width)));
- }
-
- /*
-@@ -270,7 +272,7 @@ static int bcm_enet_refill_rx(struct net
- len_stat = priv->rx_skb_size << DMADESC_LENGTH_SHIFT;
- len_stat |= DMADESC_OWNER_MASK;
- if (priv->rx_dirty_desc == priv->rx_ring_size - 1) {
-- len_stat |= DMADESC_WRAP_MASK;
-+ len_stat |= (DMADESC_WRAP_MASK >> priv->dma_desc_shift);
- priv->rx_dirty_desc = 0;
- } else {
- priv->rx_dirty_desc++;
-@@ -281,7 +283,10 @@ static int bcm_enet_refill_rx(struct net
- priv->rx_desc_count++;
-
- /* tell dma engine we allocated one buffer */
-- enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+ if (!priv->dma_no_sram)
-+ enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+ else
-+ enet_dmac_writel(priv, 1, ENETDMAC_BUFALLOC, priv->rx_chan);
- }
-
- /* If rx ring is still empty, set a timer to try allocating
-@@ -357,7 +362,8 @@ static int bcm_enet_receive_queue(struct
-
- /* if the packet does not have start of packet _and_
- * end of packet flag set, then just recycle it */
-- if ((len_stat & DMADESC_ESOP_MASK) != DMADESC_ESOP_MASK) {
-+ if ((len_stat & (DMADESC_ESOP_MASK >> priv->dma_desc_shift)) !=
-+ (DMADESC_ESOP_MASK >> priv->dma_desc_shift)) {
- dev->stats.rx_dropped++;
- continue;
- }
-@@ -418,8 +424,8 @@ static int bcm_enet_receive_queue(struct
- bcm_enet_refill_rx(dev);
-
- /* kick rx dma */
-- enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
-- ENETDMAC_CHANCFG_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, priv->dma_chan_en_mask,
-+ ENETDMAC_CHANCFG, priv->rx_chan);
- }
-
- return processed;
-@@ -494,10 +500,10 @@ static int bcm_enet_poll(struct napi_str
- dev = priv->net_dev;
-
- /* ack interrupts */
-- enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-- ENETDMAC_IR_REG(priv->rx_chan));
-- enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-- ENETDMAC_IR_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+ ENETDMAC_IR, priv->rx_chan);
-+ enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+ ENETDMAC_IR, priv->tx_chan);
-
- /* reclaim sent skb */
- tx_work_done = bcm_enet_tx_reclaim(dev, 0);
-@@ -516,10 +522,10 @@ static int bcm_enet_poll(struct napi_str
- napi_complete(napi);
-
- /* restore rx/tx interrupt */
-- enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-- ENETDMAC_IRMASK_REG(priv->rx_chan));
-- enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-- ENETDMAC_IRMASK_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+ ENETDMAC_IRMASK, priv->rx_chan);
-+ enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+ ENETDMAC_IRMASK, priv->tx_chan);
-
- return rx_work_done;
- }
-@@ -562,8 +568,8 @@ static irqreturn_t bcm_enet_isr_dma(int
- priv = netdev_priv(dev);
-
- /* mask rx/tx interrupts */
-- enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-- enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->rx_chan);
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->tx_chan);
-
- napi_schedule(&priv->napi);
-
-@@ -624,14 +630,14 @@ static int bcm_enet_start_xmit(struct sk
- DMA_TO_DEVICE);
-
- len_stat = (skb->len << DMADESC_LENGTH_SHIFT) & DMADESC_LENGTH_MASK;
-- len_stat |= DMADESC_ESOP_MASK |
-+ len_stat |= (DMADESC_ESOP_MASK >> priv->dma_desc_shift) |
- DMADESC_APPEND_CRC |
- DMADESC_OWNER_MASK;
-
- priv->tx_curr_desc++;
- if (priv->tx_curr_desc == priv->tx_ring_size) {
- priv->tx_curr_desc = 0;
-- len_stat |= DMADESC_WRAP_MASK;
-+ len_stat |= (DMADESC_WRAP_MASK >> priv->dma_desc_shift);
- }
- priv->tx_desc_count--;
-
-@@ -642,8 +648,8 @@ static int bcm_enet_start_xmit(struct sk
- wmb();
-
- /* kick tx dma */
-- enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
-- ENETDMAC_CHANCFG_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, priv->dma_chan_en_mask,
-+ ENETDMAC_CHANCFG, priv->tx_chan);
-
- /* stop queue if no more desc available */
- if (!priv->tx_desc_count)
-@@ -771,6 +777,9 @@ static void bcm_enet_set_flow(struct bcm
- val &= ~ENET_RXCFG_ENFLOW_MASK;
- enet_writel(priv, val, ENET_RXCFG_REG);
-
-+ if (priv->dma_no_sram)
-+ return;
-+
- /* tx flow control (pause frame generation) */
- val = enet_dma_readl(priv, ENETDMA_CFG_REG);
- if (tx_en)
-@@ -886,8 +895,8 @@ static int bcm_enet_open(struct net_devi
-
- /* mask all interrupts and request them */
- enet_writel(priv, 0, ENET_IRMASK_REG);
-- enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-- enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->rx_chan);
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->tx_chan);
-
- ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev);
- if (ret)
-@@ -966,8 +975,12 @@ static int bcm_enet_open(struct net_devi
- priv->rx_curr_desc = 0;
-
- /* initialize flow control buffer allocation */
-- enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-- ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+ if (!priv->dma_no_sram)
-+ enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-+ ENETDMA_BUFALLOC_REG(priv->rx_chan));
-+ else
-+ enet_dmac_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0,
-+ ENETDMAC_BUFALLOC, priv->rx_chan);
-
- if (bcm_enet_refill_rx(dev)) {
- dev_err(kdev, "cannot allocate rx skb queue\n");
-@@ -976,18 +989,30 @@ static int bcm_enet_open(struct net_devi
- }
-
- /* write rx & tx ring addresses */
-- enet_dmas_writel(priv, priv->rx_desc_dma,
-- ENETDMAS_RSTART_REG(priv->rx_chan));
-- enet_dmas_writel(priv, priv->tx_desc_dma,
-- ENETDMAS_RSTART_REG(priv->tx_chan));
-+ if (!priv->dma_no_sram) {
-+ enet_dmas_writel(priv, priv->rx_desc_dma,
-+ ENETDMAS_RSTART_REG, priv->rx_chan);
-+ enet_dmas_writel(priv, priv->tx_desc_dma,
-+ ENETDMAS_RSTART_REG, priv->tx_chan);
-+ } else {
-+ enet_dmac_writel(priv, priv->rx_desc_dma,
-+ ENETDMAC_RSTART, priv->rx_chan);
-+ enet_dmac_writel(priv, priv->tx_desc_dma,
-+ ENETDMAC_RSTART, priv->tx_chan);
-+ }
-
- /* clear remaining state ram for rx & tx channel */
-- enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->rx_chan));
-- enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->tx_chan));
-- enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->rx_chan));
-- enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->tx_chan));
-- enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->rx_chan));
-- enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan));
-+ if (!priv->dma_no_sram) {
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG, priv->rx_chan);
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG, priv->tx_chan);
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG, priv->rx_chan);
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG, priv->tx_chan);
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG, priv->rx_chan);
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG, priv->tx_chan);
-+ } else {
-+ enet_dmac_writel(priv, 0, ENETDMAC_FC, priv->rx_chan);
-+ enet_dmac_writel(priv, 0, ENETDMAC_FC, priv->tx_chan);
-+ }
-
- /* set max rx/tx length */
- enet_writel(priv, priv->hw_mtu, ENET_RXMAXLEN_REG);
-@@ -995,18 +1020,24 @@ static int bcm_enet_open(struct net_devi
-
- /* set dma maximum burst len */
- enet_dmac_writel(priv, priv->dma_maxburst,
-- ENETDMAC_MAXBURST_REG(priv->rx_chan));
-+ ENETDMAC_MAXBURST, priv->rx_chan);
- enet_dmac_writel(priv, priv->dma_maxburst,
-- ENETDMAC_MAXBURST_REG(priv->tx_chan));
-+ ENETDMAC_MAXBURST, priv->tx_chan);
-
- /* set correct transmit fifo watermark */
- enet_writel(priv, BCMENET_TX_FIFO_TRESH, ENET_TXWMARK_REG);
-
- /* set flow control low/high threshold to 1/3 / 2/3 */
-- val = priv->rx_ring_size / 3;
-- enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
-- val = (priv->rx_ring_size * 2) / 3;
-- enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
-+ if (!priv->dma_no_sram) {
-+ val = priv->rx_ring_size / 3;
-+ enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan));
-+ val = (priv->rx_ring_size * 2) / 3;
-+ enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan));
-+ } else {
-+ enet_dmac_writel(priv, 5, ENETDMAC_FC, priv->rx_chan);
-+ enet_dmac_writel(priv, priv->rx_ring_size, ENETDMAC_LEN, priv->rx_chan);
-+ enet_dmac_writel(priv, priv->tx_ring_size, ENETDMAC_LEN, priv->tx_chan);
-+ }
-
- /* all set, enable mac and interrupts, start dma engine and
- * kick rx dma channel */
-@@ -1015,26 +1046,26 @@ static int bcm_enet_open(struct net_devi
- val |= ENET_CTL_ENABLE_MASK;
- enet_writel(priv, val, ENET_CTL_REG);
- enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
-- enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
-- ENETDMAC_CHANCFG_REG(priv->rx_chan));
-+ enet_dmac_writel(priv, priv->dma_chan_en_mask,
-+ ENETDMAC_CHANCFG, priv->rx_chan);
-
- /* watch "mib counters about to overflow" interrupt */
- enet_writel(priv, ENET_IR_MIB, ENET_IR_REG);
- enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG);
-
- /* watch "packet transferred" interrupt in rx and tx */
-- enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-- ENETDMAC_IR_REG(priv->rx_chan));
-- enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-- ENETDMAC_IR_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+ ENETDMAC_IR, priv->rx_chan);
-+ enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+ ENETDMAC_IR, priv->tx_chan);
-
- /* make sure we enable napi before rx interrupt */
- napi_enable(&priv->napi);
-
-- enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-- ENETDMAC_IRMASK_REG(priv->rx_chan));
-- enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-- ENETDMAC_IRMASK_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+ ENETDMAC_IRMASK, priv->rx_chan);
-+ enet_dmac_writel(priv, priv->dma_chan_int_mask,
-+ ENETDMAC_IRMASK, priv->tx_chan);
-
- if (priv->has_phy)
- phy_start(priv->phydev);
-@@ -1111,13 +1142,13 @@ static void bcm_enet_disable_dma(struct
- {
- int limit;
-
-- enet_dmac_writel(priv, 0, ENETDMAC_CHANCFG_REG(chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_CHANCFG, chan);
-
- limit = 1000;
- do {
- u32 val;
-
-- val = enet_dmac_readl(priv, ENETDMAC_CHANCFG_REG(chan));
-+ val = enet_dmac_readl(priv, ENETDMAC_CHANCFG, chan);
- if (!(val & ENETDMAC_CHANCFG_EN_MASK))
- break;
- udelay(1);
-@@ -1144,8 +1175,8 @@ static int bcm_enet_stop(struct net_devi
-
- /* mask all interrupts */
- enet_writel(priv, 0, ENET_IRMASK_REG);
-- enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-- enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->rx_chan);
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->tx_chan);
-
- /* make sure no mib update is scheduled */
- cancel_work_sync(&priv->mib_update_task);
-@@ -1757,6 +1788,11 @@ static int __devinit bcm_enet_probe(stru
- priv->pause_tx = pd->pause_tx;
- priv->force_duplex_full = pd->force_duplex_full;
- priv->force_speed_100 = pd->force_speed_100;
-+ priv->dma_chan_en_mask = pd->dma_chan_en_mask;
-+ priv->dma_chan_int_mask = pd->dma_chan_int_mask;
-+ priv->dma_chan_width = pd->dma_chan_width;
-+ priv->dma_no_sram = pd->dma_no_sram;
-+ priv->dma_desc_shift = pd->dma_desc_shift;
- }
-
- if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) {
-@@ -2144,8 +2180,8 @@ static int bcm_enetsw_open(struct net_de
- kdev = &priv->pdev->dev;
-
- /* mask all interrupts and request them */
-- enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-- enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->rx_chan);
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->tx_chan);
-
- ret = request_irq(priv->irq_rx, bcm_enet_isr_dma,
- IRQF_DISABLED, dev->name, dev);
-@@ -2269,23 +2305,23 @@ static int bcm_enetsw_open(struct net_de
-
- /* write rx & tx ring addresses */
- enet_dmas_writel(priv, priv->rx_desc_dma,
-- ENETDMAS_RSTART_REG(priv->rx_chan));
-+ ENETDMAS_RSTART_REG, priv->rx_chan);
- enet_dmas_writel(priv, priv->tx_desc_dma,
-- ENETDMAS_RSTART_REG(priv->tx_chan));
-+ ENETDMAS_RSTART_REG, priv->tx_chan);
-
- /* clear remaining state ram for rx & tx channel */
-- enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->rx_chan));
-- enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG(priv->tx_chan));
-- enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->rx_chan));
-- enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG(priv->tx_chan));
-- enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->rx_chan));
-- enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG(priv->tx_chan));
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG, priv->rx_chan);
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM2_REG, priv->tx_chan);
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG, priv->rx_chan);
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM3_REG, priv->tx_chan);
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG, priv->rx_chan);
-+ enet_dmas_writel(priv, 0, ENETDMAS_SRAM4_REG, priv->tx_chan);
-
- /* set dma maximum burst len */
- enet_dmac_writel(priv, priv->dma_maxburst,
-- ENETDMAC_MAXBURST_REG(priv->rx_chan));
-+ ENETDMAC_MAXBURST, priv->rx_chan);
- enet_dmac_writel(priv, priv->dma_maxburst,
-- ENETDMAC_MAXBURST_REG(priv->tx_chan));
-+ ENETDMAC_MAXBURST, priv->tx_chan);
-
- /* set flow control low/high threshold to 1/3 / 2/3 */
- val = priv->rx_ring_size / 3;
-@@ -2298,21 +2334,21 @@ static int bcm_enetsw_open(struct net_de
- wmb();
- enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG);
- enet_dmac_writel(priv, ENETDMAC_CHANCFG_EN_MASK,
-- ENETDMAC_CHANCFG_REG(priv->rx_chan));
-+ ENETDMAC_CHANCFG, priv->rx_chan);
-
- /* watch "packet transferred" interrupt in rx and tx */
- enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-- ENETDMAC_IR_REG(priv->rx_chan));
-+ ENETDMAC_IR, priv->rx_chan);
- enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-- ENETDMAC_IR_REG(priv->tx_chan));
-+ ENETDMAC_IR, priv->tx_chan);
-
- /* make sure we enable napi before rx interrupt */
- napi_enable(&priv->napi);
-
- enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-- ENETDMAC_IRMASK_REG(priv->rx_chan));
-+ ENETDMAC_IRMASK, priv->rx_chan);
- enet_dmac_writel(priv, ENETDMAC_IR_PKTDONE_MASK,
-- ENETDMAC_IRMASK_REG(priv->tx_chan));
-+ ENETDMAC_IRMASK, priv->tx_chan);
-
- netif_carrier_on(dev);
- netif_start_queue(dev);
-@@ -2419,8 +2455,8 @@ static int bcm_enetsw_stop(struct net_de
- del_timer_sync(&priv->rx_timeout);
-
- /* mask all interrupts */
-- enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->rx_chan));
-- enet_dmac_writel(priv, 0, ENETDMAC_IRMASK_REG(priv->tx_chan));
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->rx_chan);
-+ enet_dmac_writel(priv, 0, ENETDMAC_IRMASK, priv->tx_chan);
-
- /* disable dma & mac */
- bcm_enet_disable_dma(priv, priv->tx_chan);
-@@ -2757,6 +2793,9 @@ static int __devinit bcm_enetsw_probe(st
- memcpy(priv->used_ports, pd->used_ports,
- sizeof (pd->used_ports));
- priv->num_ports = pd->num_ports;
-+ priv->dma_chan_en_mask = pd->dma_chan_en_mask;
-+ priv->dma_chan_int_mask = pd->dma_chan_int_mask;
-+ priv->dma_chan_width = pd->dma_chan_width;
- }
-
- ret = compute_hw_mtu(priv, dev->mtu);
---- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-+++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h
-@@ -367,6 +367,21 @@ struct bcm_enet_priv {
- /* used to poll switch port state */
- struct timer_list swphy_poll;
- spinlock_t enetsw_mdio_lock;
-+
-+ /* dma channel enable mask */
-+ u32 dma_chan_en_mask;
-+
-+ /* dma channel interrupt mask */
-+ u32 dma_chan_int_mask;
-+
-+ /* dma engine has *no* internal SRAM */
-+ unsigned int dma_no_sram;
-+
-+ /* dma channel width */
-+ unsigned int dma_chan_width;
-+
-+ /* dma descriptor shift value */
-+ unsigned int dma_desc_shift;
- };
-
- static inline int bcm_enet_port_is_rgmii(int portid)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h
-@@ -173,6 +173,7 @@ enum bcm63xx_regs_set {
- #define BCM_6368_RSET_SPI_SIZE 1804
- #define RSET_ENET_SIZE 2048
- #define RSET_ENETDMA_SIZE 256
-+#define RSET_6345_ENETDMA_SIZE 64
- #define RSET_ENETDMAC_SIZE(chans) (16 * (chans))
- #define RSET_ENETDMAS_SIZE(chans) (16 * (chans))
- #define RSET_ENETSW_SIZE 65536
-@@ -299,7 +300,7 @@ enum bcm63xx_regs_set {
- #define BCM_6345_USBDMA_BASE (0xfffe2800)
- #define BCM_6345_ENET0_BASE (0xfffe1800)
- #define BCM_6345_ENETDMA_BASE (0xfffe2800)
--#define BCM_6345_ENETDMAC_BASE (0xfffe2900)
-+#define BCM_6345_ENETDMAC_BASE (0xfffe2840)
- #define BCM_6345_ENETDMAS_BASE (0xfffe2a00)
- #define BCM_6345_ENETSW_BASE (0xdeadbeef)
- #define BCM_6345_PCMCIA_BASE (0xfffe2028)
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h
-@@ -4,6 +4,8 @@
- #include <linux/if_ether.h>
- #include <linux/init.h>
-
-+#include <bcm63xx_regs.h>
-+
- /*
- * on board ethernet platform data
- */
-@@ -37,6 +39,21 @@ struct bcm63xx_enet_platform_data {
- int phy_id, int reg),
- void (*mii_write)(struct net_device *dev,
- int phy_id, int reg, int val));
-+
-+ /* DMA channel enable mask */
-+ u32 dma_chan_en_mask;
-+
-+ /* DMA channel interrupt mask */
-+ u32 dma_chan_int_mask;
-+
-+ /* Set to one if DMA engine has *no* SRAM */
-+ unsigned int dma_no_sram;
-+
-+ /* DMA channel register width */
-+ unsigned int dma_chan_width;
-+
-+ /* DMA descriptor shift */
-+ unsigned int dma_desc_shift;
- };
-
- /*
-@@ -64,6 +81,15 @@ struct bcm63xx_enetsw_platform_data {
- char mac_addr[ETH_ALEN];
- int num_ports;
- struct bcm63xx_enetsw_port used_ports[ENETSW_MAX_PORT];
-+
-+ /* DMA channel enable mask */
-+ u32 dma_chan_en_mask;
-+
-+ /* DMA channel interrupt mask */
-+ u32 dma_chan_int_mask;
-+
-+ /* DMA channel register width */
-+ unsigned int dma_chan_width;
- };
-
- int __init bcm63xx_enet_register(int unit,
-@@ -72,4 +98,66 @@ int __init bcm63xx_enet_register(int uni
- int __init
- bcm63xx_enetsw_register(const struct bcm63xx_enetsw_platform_data *pd);
-
-+enum bcm63xx_regs_enetdmac {
-+ ENETDMAC_CHANCFG,
-+ ENETDMAC_IR,
-+ ENETDMAC_IRMASK,
-+ ENETDMAC_MAXBURST,
-+ ENETDMAC_BUFALLOC,
-+ ENETDMAC_RSTART,
-+ ENETDMAC_FC,
-+ ENETDMAC_LEN,
-+};
-+
-+static inline unsigned long bcm63xx_enetdmacreg(enum bcm63xx_regs_enetdmac reg)
-+{
-+#ifdef BCMCPU_RUNTIME_DETECT
-+ extern const unsigned long *bcm63xx_regs_enetdmac;
-+
-+ return bcm63xx_regs_enetdmac[reg];
-+#else
-+#ifdef CONFIG_BCM63XX_CPU_6345
-+ switch (reg) {
-+ case ENETDMAC_CHANCFG:
-+ return ENETDMA_6345_CHANCFG_REG;
-+ case ENETDMAC_IR:
-+ return ENETDMA_6345_IR_REG;
-+ case ENETDMAC_IRMASK:
-+ return ENETDMA_6345_IRMASK_REG;
-+ case ENETDMAC_MAXBURST:
-+ return ENETDMA_6345_MAXBURST_REG;
-+ case ENETDMAC_BUFALLOC:
-+ return ENETDMA_6345_BUFALLOC_REG;
-+ case ENETDMAC_RSTART:
-+ return ENETDMA_6345_RSTART_REG;
-+ case ENETDMAC_FC:
-+ return ENETDMA_6345_FC_REG;
-+ case ENETDMAC_LEN:
-+ return ENETDMA_6345_LEN_REG;
-+ }
-+#endif
-+#if defined(CONFIG_BCM6XX_CPU_6338) || defined(CONFIG_BCM63XX_CPU_6348) \
-+ defined(CONFIG_BCM63XX_CPU_6358) || defined(CONFIG_BCM63XX_CPU_6362) \
-+ defined(CONFIG_BCM63XX_CPU_6368)
-+ switch (reg) {
-+ case ENETDMAC_CHANCFG:
-+ return ENETDMAC_CHANCFG_REG;
-+ case ENETDMAC_IR:
-+ return ENETDMAC_IR_REG;
-+ case ENETDMAC_IRMASK:
-+ return ENETDMAC_IRMASK_REG;
-+ case ENETDMAC_MAXBURST:
-+ return ENETDMAC_MAXBURST_REG;
-+ case ENETDMAC_BUFALLOC:
-+ case ENETDMAC_RSTART:
-+ case ENETDMAC_FC:
-+ case ENETDMAC_LEN:
-+ return 0;
-+ }
-+#endif
-+#endif
-+ return 0;
-+}
-+
-+
- #endif /* ! BCM63XX_DEV_ENET_H_ */
diff --git a/target/linux/brcm63xx/patches-3.3/444-BCM63XX-add-endian-check-for-ath9k.patch b/target/linux/brcm63xx/patches-3.3/444-BCM63XX-add-endian-check-for-ath9k.patch
deleted file mode 100644
index d19bbd6174..0000000000
--- a/target/linux/brcm63xx/patches-3.3/444-BCM63XX-add-endian-check-for-ath9k.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -2,6 +2,7 @@
- #define _PCI_ATH9K_FIXUP
-
-
--void pci_enable_ath9k_fixup(unsigned slot, u32 offset) __init;
-+void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+ unsigned endian_check) __init;
-
- #endif /* _PCI_ATH9K_FIXUP */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -18,6 +18,7 @@
- struct ath9k_caldata {
- unsigned int slot;
- u32 caldata_offset;
-+ unsigned int endian_check:1;
- };
-
- /*
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -172,12 +172,14 @@ static void ath9k_pci_fixup(struct pci_d
- }
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-
--void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset)
-+void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-+ unsigned endian_check)
- {
- if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
- return;
-
- ath9k_fixups[ath9k_num_fixups].slot = slot;
-+ ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-
- if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
- return;
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -938,7 +938,8 @@ int __init board_register_devices(void)
-
- /* register any fixups */
- for (i = 0; i < board.has_caldata; i++)
-- pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset);
-+ pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
-+ board.caldata[i].endian_check);
-
- return 0;
- }
diff --git a/target/linux/brcm63xx/patches-3.3/445-BCM63XX-add-led-pin-for-ath9k.patch b/target/linux/brcm63xx/patches-3.3/445-BCM63XX-add-led-pin-for-ath9k.patch
deleted file mode 100644
index e09cd83bc2..0000000000
--- a/target/linux/brcm63xx/patches-3.3/445-BCM63XX-add-led-pin-for-ath9k.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -939,7 +939,7 @@ int __init board_register_devices(void)
- /* register any fixups */
- for (i = 0; i < board.has_caldata; i++)
- pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
-- board.caldata[i].endian_check);
-+ board.caldata[i].endian_check, board.caldata[i].led_pin);
-
- return 0;
- }
---- a/arch/mips/bcm63xx/pci-ath9k-fixup.c
-+++ b/arch/mips/bcm63xx/pci-ath9k-fixup.c
-@@ -173,13 +173,14 @@ static void ath9k_pci_fixup(struct pci_d
- DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, ath9k_pci_fixup);
-
- void __init pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-- unsigned endian_check)
-+ unsigned endian_check, int led_pin)
- {
- if (ath9k_num_fixups >= ARRAY_SIZE(ath9k_fixups))
- return;
-
- ath9k_fixups[ath9k_num_fixups].slot = slot;
- ath9k_fixups[ath9k_num_fixups].pdata.endian_check = endian_check;
-+ ath9k_fixups[ath9k_num_fixups].pdata.led_pin = led_pin;
-
- if (!bcm63xx_read_eeprom(ath9k_fixups[ath9k_num_fixups].pdata.eeprom_data, offset))
- return;
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -19,6 +19,7 @@ struct ath9k_caldata {
- unsigned int slot;
- u32 caldata_offset;
- unsigned int endian_check:1;
-+ int led_pin;
- };
-
- /*
---- a/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_ath9k_fixup.h
-@@ -3,6 +3,6 @@
-
-
- void pci_enable_ath9k_fixup(unsigned slot, u32 offset,
-- unsigned endian_check) __init;
-+ unsigned endian_check, int led_pin) __init;
-
- #endif /* _PCI_ATH9K_FIXUP */
diff --git a/target/linux/brcm63xx/patches-3.3/446-BCM63XX-add-a-fixup-for-rt2x00-devices.patch b/target/linux/brcm63xx/patches-3.3/446-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
deleted file mode 100644
index acda59090b..0000000000
--- a/target/linux/brcm63xx/patches-3.3/446-BCM63XX-add-a-fixup-for-rt2x00-devices.patch
+++ /dev/null
@@ -1,188 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -34,6 +34,7 @@
- #include <board_bcm963xx.h>
- #include <linux/bcm963xx_tag.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
-
- #define PFX "board_bcm963xx: "
-
-@@ -937,9 +938,19 @@ int __init board_register_devices(void)
- }
-
- /* register any fixups */
-- for (i = 0; i < board.has_caldata; i++)
-- pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,
-- board.caldata[i].endian_check, board.caldata[i].led_pin);
-+ for (i = 0; i < board.has_caldata; i++) {
-+ switch (board.caldata[i].vendor) {
-+ case PCI_VENDOR_ID_ATHEROS:
-+ pci_enable_ath9k_fixup(board.caldata[i].slot,
-+ board.caldata[i].caldata_offset, board.caldata[i].endian_check,
-+ board.caldata[i].led_pin);
-+ break;
-+ case PCI_VENDOR_ID_RALINK:
-+ pci_enable_rt2x00_fixup(board.caldata[i].slot,
-+ board.caldata[i].eeprom);
-+ break;
-+ }
-+ }
-
- return 0;
- }
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -146,7 +146,7 @@ static int __init bcm63xx_detect_flash_t
- return 0;
- }
-
--int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata)
-+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata)
- {
- u32 val;
- unsigned int i;
---- a/arch/mips/bcm63xx/Makefile
-+++ b/arch/mips/bcm63xx/Makefile
-@@ -1,7 +1,8 @@
- obj-y += clk.o cpu.o cs.o gpio.o irq.o nvram.o prom.o setup.o \
- timer.o dev-dsp.o dev-enet.o dev-flash.o dev-hsspi.o \
- dev-pcmcia.o dev-rng.o dev-spi.o dev-uart.o dev-usb-ehci.o \
-- dev-usb-ohci.o dev-wdt.o pci-ath9k-fixup.o
-+ dev-usb-ohci.o dev-wdt.o pci-ath9k-fixup.o \
-+ pci-rt2x00-fixup.o
- obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-
- obj-y += boards/
---- /dev/null
-+++ b/arch/mips/bcm63xx/pci-rt2x00-fixup.c
-@@ -0,0 +1,71 @@
-+/*
-+ * Broadcom BCM63XX RT2x00 EEPROM fixup helper.
-+ *
-+ * Copyright (C) 2012 Álvaro Fernández Rojas <noltari@gmail.com>
-+ *
-+ * Based on
-+ *
-+ * Broadcom BCM63XX Ath9k EEPROM fixup helper.
-+ *
-+ * Copyright (C) 2012 Jonas Gorski <jonas.gorski@gmail.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of the GNU General Public License version 2 as published
-+ * by the Free Software Foundation.
-+ */
-+
-+#include <linux/pci.h>
-+#include <linux/platform_device.h>
-+#include <linux/rt2x00_platform.h>
-+
-+#include <bcm63xx_nvram.h>
-+#include <pci_rt2x00_fixup.h>
-+
-+struct rt2x00_fixup {
-+ unsigned slot;
-+ u8 mac[ETH_ALEN];
-+ struct rt2x00_platform_data pdata;
-+};
-+
-+static int rt2x00_num_fixups;
-+static struct rt2x00_fixup rt2x00_fixups[2] = {
-+ {
-+ .slot = 255,
-+ },
-+ {
-+ .slot = 255,
-+ },
-+};
-+
-+static void rt2x00_pci_fixup(struct pci_dev *dev)
-+{
-+ unsigned i;
-+ struct rt2x00_platform_data *pdata = NULL;
-+
-+ for (i = 0; i < rt2x00_num_fixups; i++) {
-+ if (rt2x00_fixups[i].slot != PCI_SLOT(dev->devfn))
-+ continue;
-+
-+ pdata = &rt2x00_fixups[i].pdata;
-+ break;
-+ }
-+
-+ dev->dev.platform_data = pdata;
-+}
-+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_RALINK, PCI_ANY_ID, rt2x00_pci_fixup);
-+
-+void __init pci_enable_rt2x00_fixup(unsigned slot, char* eeprom)
-+{
-+ if (rt2x00_num_fixups >= ARRAY_SIZE(rt2x00_fixups))
-+ return;
-+
-+ rt2x00_fixups[rt2x00_num_fixups].slot = slot;
-+ rt2x00_fixups[rt2x00_num_fixups].pdata.eeprom_file_name = kstrdup(eeprom, GFP_KERNEL);
-+
-+ if (bcm63xx_nvram_get_mac_address(rt2x00_fixups[rt2x00_num_fixups].mac))
-+ return;
-+
-+ rt2x00_fixups[rt2x00_num_fixups].pdata.mac_address = rt2x00_fixups[rt2x00_num_fixups].mac;
-+ rt2x00_num_fixups++;
-+}
-+
---- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_flash.h
-@@ -11,6 +11,6 @@ enum {
-
- extern int bcm63xx_attached_flash;
-
--int __init bcm63xx_flash_register(int num_caldata, struct ath9k_caldata *caldata);
-+int __init bcm63xx_flash_register(int num_caldata, struct bcm63xx_caldata *caldata);
-
- #endif /* __BCM63XX_FLASH_H */
---- a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-+++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h
-@@ -8,6 +8,7 @@
- #include <bcm63xx_dev_enet.h>
- #include <bcm63xx_dev_dsp.h>
- #include <pci_ath9k_fixup.h>
-+#include <pci_rt2x00_fixup.h>
-
- /*
- * flash mapping
-@@ -15,11 +16,15 @@
- #define BCM963XX_CFE_VERSION_OFFSET 0x570
- #define BCM963XX_NVRAM_OFFSET 0x580
-
--struct ath9k_caldata {
-+struct bcm63xx_caldata {
-+ unsigned int vendor;
- unsigned int slot;
- u32 caldata_offset;
-+ /* Atheros */
- unsigned int endian_check:1;
- int led_pin;
-+ /* Ralink */
-+ char* eeprom;
- };
-
- /*
-@@ -43,7 +48,7 @@ struct board_info {
- unsigned int has_caldata:2;
-
- /* wifi calibration data config */
-- struct ath9k_caldata caldata[2];
-+ struct bcm63xx_caldata caldata[2];
-
- /* ethernet config */
- struct bcm63xx_enet_platform_data enet0;
---- /dev/null
-+++ b/arch/mips/include/asm/mach-bcm63xx/pci_rt2x00_fixup.h
-@@ -0,0 +1,9 @@
-+#ifndef _PCI_RT2X00_FIXUP
-+#define _PCI_RT2X00_FIXUP
-+
-+#define PCI_VENDOR_ID_RALINK 0x1814
-+
-+void pci_enable_rt2x00_fixup(unsigned slot, char* eeprom) __init;
-+
-+#endif /* _PCI_RT2X00_FIXUP */
-+
diff --git a/target/linux/brcm63xx/patches-3.3/500-board-D4PW.patch b/target/linux/brcm63xx/patches-3.3/500-board-D4PW.patch
deleted file mode 100644
index 278f426712..0000000000
--- a/target/linux/brcm63xx/patches-3.3/500-board-D4PW.patch
+++ /dev/null
@@ -1,65 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -470,6 +470,54 @@ static struct board_info __initdata boar
-
- .has_ohci0 = 1,
- };
-+
-+static struct board_info __initdata board_96348_D4PW = {
-+ .name = "D-4P-W",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+ .has_uart0 = 1,
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "D-4P-W:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "D-4P-W::status",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "D-4P-W:green:internet",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "D-4P-W:red:internet",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 7,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -641,6 +689,7 @@ static const struct board_info __initdat
- &board_DV201AMR,
- &board_96348gw_a,
- &board_rta1025w_16,
-+ &board_96348_D4PW,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch b/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch
deleted file mode 100644
index 61fc793438..0000000000
--- a/target/linux/brcm63xx/patches-3.3/501-board-NB4.patch
+++ /dev/null
@@ -1,640 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -15,6 +15,8 @@
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
- #include <linux/spi/spi.h>
-+#include <linux/spi/spi_gpio.h>
-+#include <linux/spi/74x164.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -44,6 +46,12 @@
- #define CFE_OFFSET_64K 0x10000
- #define CFE_OFFSET_128K 0x20000
-
-+#define NB4_PID_OFFSET 0xff80
-+#define NB4_74X164_GPIO_BASE 64
-+#define NB4_SPI_GPIO_MOSI 7
-+#define NB4_SPI_GPIO_CLK 6
-+#define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
-+
- static struct board_info board;
-
- /*
-@@ -667,6 +675,586 @@ static struct board_info __initdata boar
-
- .has_ohci0 = 1,
- };
-+
-+struct spi_gpio_platform_data nb4_spi_gpio_data = {
-+ .sck = NB4_SPI_GPIO_CLK,
-+ .mosi = NB4_SPI_GPIO_MOSI,
-+ .miso = SPI_GPIO_NO_MISO,
-+ .num_chipselect = 1,
-+};
-+
-+
-+static struct platform_device nb4_spi_gpio = {
-+ .name = "spi_gpio",
-+ .id = 1,
-+ .dev = {
-+ .platform_data = &nb4_spi_gpio_data,
-+ },
-+};
-+
-+static struct platform_device * __initdata nb4_devices[] = {
-+ &nb4_spi_gpio,
-+};
-+
-+const struct gen_74x164_chip_platform_data nb4_74x164_platform_data = {
-+ .base = NB4_74X164_GPIO_BASE
-+};
-+
-+static struct spi_board_info nb4_spi_devices[] = {
-+ {
-+ .modalias = "74x164",
-+ .max_speed_hz = 781000,
-+ .bus_num = 1,
-+ .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
-+ .mode = SPI_MODE_0,
-+ .platform_data = &nb4_74x164_platform_data
-+ }
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r0 = {
-+ .name = "NB4-SER-r0",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "NB4-SER-r0:white:adsl",
-+ .gpio = NB4_74HC64_GPIO(4),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r0:white:traffic",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r0:white:tel",
-+ .gpio = NB4_74HC64_GPIO(3),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r0:white:tv",
-+ .gpio = NB4_74HC64_GPIO(2),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r0:white:wifi",
-+ .gpio = 15,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r0:white:alarm",
-+ .gpio = NB4_74HC64_GPIO(0),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r0:red:service",
-+ .gpio = 29,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r0:green:service",
-+ .gpio = 30,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r0:blue:service",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 37,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "service",
-+ .gpio = 27,
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "clip",
-+ .gpio = 31,
-+ .type = EV_KEY,
-+ .code = BTN_1,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+ .devs = nb4_devices,
-+ .num_devs = ARRAY_SIZE(nb4_devices),
-+ .spis = nb4_spi_devices,
-+ .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r1 = {
-+ .name = "NB4-SER-r1",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "NB4-SER-r1:white:adsl",
-+ .gpio = NB4_74HC64_GPIO(4),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r1:white:traffic",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r1:white:tel",
-+ .gpio = NB4_74HC64_GPIO(3),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r1:white:tv",
-+ .gpio = NB4_74HC64_GPIO(2),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r1:white:wifi",
-+ .gpio = 15,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r1:white:alarm",
-+ .gpio = NB4_74HC64_GPIO(0),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r1:red:service",
-+ .gpio = 29,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r1:green:service",
-+ .gpio = 30,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r1:blue:service",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 37,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "service",
-+ .gpio = 27,
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "clip",
-+ .gpio = 31,
-+ .type = EV_KEY,
-+ .code = BTN_1,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+ .devs = nb4_devices,
-+ .num_devs = ARRAY_SIZE(nb4_devices),
-+ .spis = nb4_spi_devices,
-+ .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_ser_r2 = {
-+ .name = "NB4-SER-r2",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "NB4-SER-r2:white:adsl",
-+ .gpio = NB4_74HC64_GPIO(4),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r2:white:traffic",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r2:white:tel",
-+ .gpio = NB4_74HC64_GPIO(3),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r2:white:tv",
-+ .gpio = NB4_74HC64_GPIO(2),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r2:white:wifi",
-+ .gpio = 15,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r2:white:alarm",
-+ .gpio = NB4_74HC64_GPIO(0),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r2:red:service",
-+ .gpio = 29,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r2:green:service",
-+ .gpio = 30,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-SER-r2:blue:service",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 37,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "service",
-+ .gpio = 27,
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "clip",
-+ .gpio = 31,
-+ .type = EV_KEY,
-+ .code = BTN_1,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+ .devs = nb4_devices,
-+ .num_devs = ARRAY_SIZE(nb4_devices),
-+ .spis = nb4_spi_devices,
-+ .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r1 = {
-+ .name = "NB4-FXC-r1",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "NB4-FXC-r1:white:adsl",
-+ .gpio = NB4_74HC64_GPIO(4),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-FXC-r1:white:traffic",
-+ .gpio = 2,
-+ },
-+ {
-+ .name = "NB4-FXC-r1:white:tel",
-+ .gpio = NB4_74HC64_GPIO(3),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-FXC-r1:white:tv",
-+ .gpio = NB4_74HC64_GPIO(2),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-FXC-r1:white:wifi",
-+ .gpio = 15,
-+ },
-+ {
-+ .name = "NB4-FXC-r1:white:alarm",
-+ .gpio = NB4_74HC64_GPIO(0),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-FXC-r1:red:service",
-+ .gpio = 29,
-+ },
-+ {
-+ .name = "NB4-FXC-r1:green:service",
-+ .gpio = 30,
-+ },
-+ {
-+ .name = "NB4-FXC-r1:blue:service",
-+ .gpio = 4,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 37,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "service",
-+ .gpio = 27,
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "clip",
-+ .gpio = 31,
-+ .type = EV_KEY,
-+ .code = BTN_1,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+ .devs = nb4_devices,
-+ .num_devs = ARRAY_SIZE(nb4_devices),
-+ .spis = nb4_spi_devices,
-+ .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
-+
-+static struct board_info __initdata board_nb4_fxc_r2 = {
-+ .name = "NB4-FXC-r2",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "NB4-FXC-r2:white:adsl",
-+ .gpio = NB4_74HC64_GPIO(4),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-FXC-r2:white:traffic",
-+ .gpio = 2,
-+ },
-+ {
-+ .name = "NB4-FXC-r2:white:tel",
-+ .gpio = NB4_74HC64_GPIO(3),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-FXC-r2:white:tv",
-+ .gpio = NB4_74HC64_GPIO(2),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-FXC-r2:white:wifi",
-+ .gpio = 15,
-+ },
-+ {
-+ .name = "NB4-FXC-r2:white:alarm",
-+ .gpio = NB4_74HC64_GPIO(0),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "NB4-FXC-r2:red:service",
-+ .gpio = 29,
-+ },
-+ {
-+ .name = "NB4-FXC-r2:green:service",
-+ .gpio = 30,
-+ },
-+ {
-+ .name = "NB4-FXC-r2:blue:service",
-+ .gpio = 4,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 37,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "service",
-+ .gpio = 27,
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "clip",
-+ .gpio = 31,
-+ .type = EV_KEY,
-+ .code = BTN_1,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+ .devs = nb4_devices,
-+ .num_devs = ARRAY_SIZE(nb4_devices),
-+ .spis = nb4_spi_devices,
-+ .num_spis = ARRAY_SIZE(nb4_spi_devices),
-+};
- #endif
-
- /*
-@@ -697,6 +1285,11 @@ static const struct board_info __initdat
- &board_96358vw2,
- &board_AGPFS0,
- &board_DWVS0,
-+ &board_nb4_ser_r0,
-+ &board_nb4_ser_r1,
-+ &board_nb4_ser_r2,
-+ &board_nb4_fxc_r1,
-+ &board_nb4_fxc_r2,
- #endif
- };
-
-@@ -751,6 +1344,16 @@ static void __init boardid_fixup(u8 *boo
- struct bcm_tag *tag = (struct bcm_tag *)(boot_addr + CFE_OFFSET_64K);
- char *board_name = (char *)bcm63xx_nvram_get_name();
-
-+ if (BCMCPU_IS_6358() && (!strcmp(board_name, "96358VW"))) {
-+ u8 *p = boot_addr + NB4_PID_OFFSET;
-+
-+ /* Extract nb4 PID */
-+ if (!memcmp(p, "NB4-", 4)) {
-+ memcpy(board_name, p, sizeof("NB4-XXX-rX"));
-+ return;
-+ }
-+ }
-+
- /* check if bcm_tag is at 64k offset */
- if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
- /* else try 128k */
diff --git a/target/linux/brcm63xx/patches-3.3/502-board-96338W2_E7T.patch b/target/linux/brcm63xx/patches-3.3/502-board-96338W2_E7T.patch
deleted file mode 100644
index e5a5a13eae..0000000000
--- a/target/linux/brcm63xx/patches-3.3/502-board-96338W2_E7T.patch
+++ /dev/null
@@ -1,49 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -141,6 +141,38 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_96338w2_e7t = {
-+ .name = "96338W2_E7T",
-+ .expected_cpu_id = 0x6338,
-+
-+ .has_enet0 = 1,
-+
-+ .enet0 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "96338W2_E7T:green:ppp",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96338W2_E7T:green:ppp-fail",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96338W2_E7T:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -1264,6 +1296,7 @@ static const struct board_info __initdat
- #ifdef CONFIG_BCM63XX_CPU_6338
- &board_96338gw,
- &board_96338w,
-+ &board_96338w2_e7t,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- &board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.3/503-board-CPVA642.patch b/target/linux/brcm63xx/patches-3.3/503-board-CPVA642.patch
deleted file mode 100644
index 1b88865aa7..0000000000
--- a/target/linux/brcm63xx/patches-3.3/503-board-CPVA642.patch
+++ /dev/null
@@ -1,107 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -664,6 +664,96 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_CPVA642 = {
-+ .name = "CPVA642",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "CPVA642:red:power",
-+ .gpio = 14,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CPVA642:green:power",
-+ .gpio = 11,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "CPVA642:red:wifi",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CPVA642:green:wifi",
-+ .gpio = 28,
-+ .active_low = 0,
-+ },
-+ {
-+ .name = "CPVA642:red:link",
-+ .gpio = 9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CPVA642:green:link",
-+ .gpio = 10,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CPVA642:green:ether",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CPVA642:green:phone1",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CPVA642:green:phone2",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CPVA642:green:usb",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 36,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 37,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
-+
-+
- static struct board_info __initdata board_AGPFS0 = {
- .name = "AGPF-S0",
- .expected_cpu_id = 0x6358,
-@@ -1317,6 +1407,7 @@ static const struct board_info __initdat
- &board_96358vw,
- &board_96358vw2,
- &board_AGPFS0,
-+ &board_CPVA642,
- &board_DWVS0,
- &board_nb4_ser_r0,
- &board_nb4_ser_r1,
diff --git a/target/linux/brcm63xx/patches-3.3/504-board_dsl_274xb_rev_c.patch b/target/linux/brcm63xx/patches-3.3/504-board_dsl_274xb_rev_c.patch
deleted file mode 100644
index 0384738ad5..0000000000
--- a/target/linux/brcm63xx/patches-3.3/504-board_dsl_274xb_rev_c.patch
+++ /dev/null
@@ -1,70 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -798,6 +798,59 @@ static struct board_info __initdata boar
- .has_ohci0 = 1,
- };
-
-+/* D-Link DSL-274xB revison C2/C3 */
-+static struct board_info __initdata board_dsl_274xb_rev_c = {
-+ .name = "AW4139",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "dsl-274xb:green:power",
-+ .gpio = 5,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "dsl-274xb:red:power",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "dsl-274xb:green:adsl",
-+ .gpio = 9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "dsl-274xb:green:internet",
-+ .gpio = 2,
-+ },
-+ {
-+ .name = "dsl-274xb:red:internet",
-+ .gpio = 10,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
-+
- struct spi_gpio_platform_data nb4_spi_gpio_data = {
- .sck = NB4_SPI_GPIO_CLK,
- .mosi = NB4_SPI_GPIO_MOSI,
-@@ -1409,6 +1462,7 @@ static const struct board_info __initdat
- &board_AGPFS0,
- &board_CPVA642,
- &board_DWVS0,
-+ &board_dsl_274xb_rev_c,
- &board_nb4_ser_r0,
- &board_nb4_ser_r1,
- &board_nb4_ser_r2,
diff --git a/target/linux/brcm63xx/patches-3.3/505-board_spw500v.patch b/target/linux/brcm63xx/patches-3.3/505-board_spw500v.patch
deleted file mode 100644
index cea37300ff..0000000000
--- a/target/linux/brcm63xx/patches-3.3/505-board_spw500v.patch
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -558,6 +558,67 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_spw500v = {
-+ .name = "SPW500V",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .has_dsp = 1,
-+ .dsp = {
-+ .gpio_rst = 6,
-+ .gpio_int = 34,
-+ .ext_irq = 2,
-+ .cs = 2,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "SPW500V:red:power",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "SPW500V:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "SPW500V:green:ppp",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ { .name = "SPW500V:green:pstn",
-+ .gpio = 28,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "SPW500V:green:voip",
-+ .gpio = 32,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 33,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -1454,6 +1515,7 @@ static const struct board_info __initdat
- &board_96348gw_a,
- &board_rta1025w_16,
- &board_96348_D4PW,
-+ &board_spw500v,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.3/506-board_gw6200_gw6000.patch b/target/linux/brcm63xx/patches-3.3/506-board_gw6200_gw6000.patch
deleted file mode 100644
index 7b90e29c75..0000000000
--- a/target/linux/brcm63xx/patches-3.3/506-board_gw6200_gw6000.patch
+++ /dev/null
@@ -1,124 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -427,6 +427,112 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_gw6200 = {
-+ .name = "GW6200",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+
-+ .has_dsp = 1,
-+ .dsp = {
-+ .gpio_rst = 8, /* FIXME: What is real GPIO here? */
-+ .gpio_int = 34,
-+ .ext_irq = 2,
-+ .cs = 2,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "GW6200:green:line1",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "GW6200:green:line2",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "GW6200:green:line3",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "GW6200:green:tel",
-+ .gpio = 7,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 36,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
-+
-+static struct board_info __initdata board_gw6000 = {
-+ .name = "GW6000",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+
-+ .has_dsp = 1,
-+ .dsp = {
-+ .gpio_rst = 6,
-+ .gpio_int = 34,
-+ .ext_irq = 2,
-+ .cs = 2,
-+ },
-+
-+ /* GW6000 has no GPIO-controlled leds */
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 36,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
-+
-+
-+
- static struct board_info __initdata board_FAST2404 = {
- .name = "F@ST2404",
- .expected_cpu_id = 0x6348,
-@@ -1508,6 +1614,8 @@ static const struct board_info __initdat
- #ifdef CONFIG_BCM63XX_CPU_6348
- &board_96348r,
- &board_96348gw,
-+ &board_gw6000,
-+ &board_gw6200,
- &board_96348gw_10,
- &board_96348gw_11,
- &board_FAST2404,
diff --git a/target/linux/brcm63xx/patches-3.3/507-board-MAGIC.patch b/target/linux/brcm63xx/patches-3.3/507-board-MAGIC.patch
deleted file mode 100644
index cdde026864..0000000000
--- a/target/linux/brcm63xx/patches-3.3/507-board-MAGIC.patch
+++ /dev/null
@@ -1,87 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -725,6 +725,76 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_96348sv = {
-+ .name = "MAGIC",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+ .enet1 = {
-+ /* it has BP_ENET_EXTERNAL_PHY */
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_dsp = 1,
-+ .dsp = {
-+ .gpio_rst = 25,
-+ .gpio_int = 34,
-+ .cs = 2,
-+ .ext_irq = 2,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "MAGIC:green:voip",
-+ .gpio = 22,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "MAGIC:green:adsl",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "MAGIC:green:wifi",
-+ .gpio = 28,
-+ },
-+ {
-+ .name = "MAGIC:green:usb",
-+ .gpio = 35,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "MAGIC:green:hpna",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "MAGIC:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "MAGIC:green:stop",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -1624,6 +1694,7 @@ static const struct board_info __initdat
- &board_rta1025w_16,
- &board_96348_D4PW,
- &board_spw500v,
-+ &board_96348sv,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.3/508-board_hw553.patch b/target/linux/brcm63xx/patches-3.3/508-board_hw553.patch
deleted file mode 100644
index 9b2d34d5c7..0000000000
--- a/target/linux/brcm63xx/patches-3.3/508-board_hw553.patch
+++ /dev/null
@@ -1,91 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1667,6 +1667,80 @@ static struct board_info __initdata boar
- .spis = nb4_spi_devices,
- .num_spis = ARRAY_SIZE(nb4_spi_devices),
- };
-+
-+static struct board_info __initdata board_HW553 = {
-+ .name = "HW553",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "HW553:red:lan",
-+ .gpio = 34,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "HW553:blue:lan",
-+ .gpio = 35,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "HW553:red:adsl",
-+ .gpio = 22,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "HW553:blue:adsl",
-+ .gpio = 23,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "HW553:red:power",
-+ .gpio = 5,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+
-+ {
-+ .name = "HW553:blue:power",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "HW553:red:wifi",
-+ .gpio = 25,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "HW553:red:internetkey",
-+ .gpio = 12,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "HW553:blue:internetkey",
-+ .gpio = 13,
-+ .active_low = 1,
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -1709,6 +1783,7 @@ static const struct board_info __initdat
- &board_nb4_ser_r2,
- &board_nb4_fxc_r1,
- &board_nb4_fxc_r2,
-+ &board_HW553,
- #endif
- };
-
diff --git a/target/linux/brcm63xx/patches-3.3/509-board_rta1320_16m.patch b/target/linux/brcm63xx/patches-3.3/509-board_rta1320_16m.patch
deleted file mode 100644
index 9301e14384..0000000000
--- a/target/linux/brcm63xx/patches-3.3/509-board_rta1320_16m.patch
+++ /dev/null
@@ -1,54 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -173,6 +173,43 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_rta1320_16m = {
-+ .name = "RTA1320_16M",
-+ .expected_cpu_id = 0x6338,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+
-+ .enet0 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "RTA1320_16M:green:adsl",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "RTA1320_16M:green:ppp",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "RTA1320_16M:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "RTA1320_16M:green:stop",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -1751,6 +1788,7 @@ static const struct board_info __initdat
- &board_96338gw,
- &board_96338w,
- &board_96338w2_e7t,
-+ &board_rta1320_16m,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- &board_96345gw2,
diff --git a/target/linux/brcm63xx/patches-3.3/510-board_spw303v.patch b/target/linux/brcm63xx/patches-3.3/510-board_spw303v.patch
deleted file mode 100644
index 6ec55a50d8..0000000000
--- a/target/linux/brcm63xx/patches-3.3/510-board_spw303v.patch
+++ /dev/null
@@ -1,83 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1778,6 +1778,72 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+ /* T-Home Speedport W 303V Typ B */
-+static struct board_info __initdata board_spw303v = {
-+ .name = "96358-502V",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "spw303v:green:power+adsl",
-+ .gpio = 22,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "spw303v:red:power+adsl",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "spw303v:green:ppp",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "spw303v:green:ses",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "spw303v:green:voip",
-+ .gpio = 27,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "spw303v:green:pots",
-+ .gpio = 31,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 11,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "ses",
-+ .gpio = 37,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ }
-+};
- #endif
-
- /*
-@@ -1822,6 +1888,7 @@ static const struct board_info __initdat
- &board_nb4_fxc_r1,
- &board_nb4_fxc_r2,
- &board_HW553,
-+ &board_spw303v,
- #endif
- };
-
diff --git a/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch b/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch
deleted file mode 100644
index 86b7fe1eb8..0000000000
--- a/target/linux/brcm63xx/patches-3.3/511-board_V2500V.patch
+++ /dev/null
@@ -1,122 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -832,6 +832,63 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_V2500V_BB = {
-+ .name = "V2500V_BB",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "V2500V_BB:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "V2500V_BB:red:power",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "V2500V_BB:green:adsl",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ { .name = "V2500V_BB:green:ppp",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "V2500V_BB:green:wireless",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 31,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -1873,6 +1930,7 @@ static const struct board_info __initdat
- &board_96348_D4PW,
- &board_spw500v,
- &board_96348sv,
-+ &board_V2500V_BB,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
-@@ -1993,6 +2051,23 @@ void __init board_prom_init(void)
- val &= MPI_CSBASE_BASE_MASK;
- }
- boot_addr = (u8 *)KSEG1ADDR(val);
-+ printk(KERN_INFO PFX "Boot address 0x%08x\n",(unsigned int)boot_addr);
-+
-+ /* BT Voyager 2500V (RTA1046VW PCB) has 8 Meg flash used as two */
-+ /* banks of 4 Meg. The byte at 0xBF800000 identifies the back to use.*/
-+ /* Loading firmware from the CFE Prompt always loads to Bank 0 */
-+ /* Do an early check of CFE and then select bank 0 */
-+
-+ if (boot_addr == (u8 *)0xbf800000) {
-+ unsigned char board_name[16];
-+ u8 *tmp_boot_addr;
-+ tmp_boot_addr = (u8 *)0xbfc00000; // Address of Bank 0
-+ memcpy(board_name, tmp_boot_addr + BCM963XX_NVRAM_OFFSET + offsetof(struct bcm963xx_nvram, name), sizeof(board_name));
-+ if (!strcmp(board_name, "V2500V_BB")) {
-+ printk(KERN_INFO PFX "V2500V: nvram bank 0\n");
-+ boot_addr = (u8 *)0xbfc00000; // Bank 0
-+ }
-+ }
-
- /* dump cfe version */
- cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
---- a/arch/mips/bcm63xx/dev-flash.c
-+++ b/arch/mips/bcm63xx/dev-flash.c
-@@ -19,6 +19,7 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/flash.h>
-
-+#include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
- #include <bcm63xx_dev_flash.h>
- #include <bcm63xx_dev_hsspi.h>
-@@ -162,6 +163,13 @@ int __init bcm63xx_flash_register(int nu
- val = bcm_mpi_readl(MPI_CSBASE_REG(0));
- val &= MPI_CSBASE_BASE_MASK;
-
-+ /* BT Voyager 2500V has 8 Meg flash in two 4 Meg banks */
-+ /* Loading from CFE always uses Bank 0 */
-+ if (!strcmp(board_get_name(), "V2500V_BB")) {
-+ pr_info("V2500V: Start in Bank 0\n");
-+ val = val + 0x400000; // Select Bank 0 start address
-+ }
-+
- mtd_resources[0].start = val;
- mtd_resources[0].end = 0x1FFFFFFF;
-
diff --git a/target/linux/brcm63xx/patches-3.3/512-board_BTV2110.patch b/target/linux/brcm63xx/patches-3.3/512-board_BTV2110.patch
deleted file mode 100644
index a123e24727..0000000000
--- a/target/linux/brcm63xx/patches-3.3/512-board_BTV2110.patch
+++ /dev/null
@@ -1,73 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -396,6 +396,62 @@ static struct board_info __initdata boar
- },
- };
-
-+
-+/* BT Voyager 2110 */
-+static struct board_info __initdata board_V2110 = {
-+ .name = "V2110",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "V2110:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "V2110:red:power",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "V2110:green:adsl",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ { .name = "V2110:green:ppp",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "V2110:green:wireless",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 33,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
-+
-+
- static struct board_info __initdata board_96348gw = {
- .name = "96348GW",
- .expected_cpu_id = 0x6348,
-@@ -1931,6 +1987,7 @@ static const struct board_info __initdat
- &board_spw500v,
- &board_96348sv,
- &board_V2500V_BB,
-+ &board_V2110,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.3/513-board_livebox.patch b/target/linux/brcm63xx/patches-3.3/513-board_livebox.patch
deleted file mode 100644
index dc53d481bb..0000000000
--- a/target/linux/brcm63xx/patches-3.3/513-board_livebox.patch
+++ /dev/null
@@ -1,391 +0,0 @@
---- a/arch/mips/bcm63xx/boards/Kconfig
-+++ b/arch/mips/bcm63xx/boards/Kconfig
-@@ -8,4 +8,10 @@ config BOARD_BCM963XX
- select SSB
- help
-
-+config BOARD_LIVEBOX
-+ bool "Inventel Livebox(es) boards"
-+ select SSB
-+ help
-+ Inventel Livebox boards using the RedBoot bootloader.
-+
- endchoice
---- a/arch/mips/bcm63xx/boards/Makefile
-+++ b/arch/mips/bcm63xx/boards/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o
-+obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o
-
- ccflags-y := -Werror
---- /dev/null
-+++ b/arch/mips/bcm63xx/boards/board_livebox.c
-@@ -0,0 +1,368 @@
-+/*
-+ * This file is subject to the terms and conditions of the GNU General Public
-+ * License. See the file "COPYING" in the main directory of this archive
-+ * for more details.
-+ *
-+ * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+#include <linux/platform_device.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/ssb/ssb.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/input.h>
-+#include <linux/spi/spi.h>
-+#include <asm/addrspace.h>
-+#include <bcm63xx_board.h>
-+#include <bcm63xx_cpu.h>
-+#include <bcm63xx_dev_uart.h>
-+#include <bcm63xx_regs.h>
-+#include <bcm63xx_io.h>
-+#include <bcm63xx_dev_pci.h>
-+#include <bcm63xx_dev_enet.h>
-+#include <bcm63xx_dev_dsp.h>
-+#include <bcm63xx_dev_pcmcia.h>
-+#include <bcm63xx_dev_usb_ohci.h>
-+#include <bcm63xx_dev_usb_ehci.h>
-+#include <bcm63xx_dev_spi.h>
-+#include <board_bcm963xx.h>
-+
-+#define PFX "board_livebox: "
-+
-+#define LIVEBOX_KEYS_POLL_INTERVAL 20
-+#define LIVEBOX_KEYS_DEBOUNCE_INTERVAL (LIVEBOX_KEYS_POLL_INTERVAL * 3)
-+
-+static unsigned int mac_addr_used = 0;
-+static struct board_info board;
-+
-+/*
-+ * known 6348 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+static struct board_info __initdata board_livebox_blue5g = {
-+ .name = "Livebox-blue-5g",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+
-+ .enet1 = {
-+ .has_phy = 1,
-+ .phy_id = 31,
-+ },
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+
-+ .has_dsp = 0, /*TODO some Liveboxes have dsp*/
-+ .dsp = {
-+ .gpio_rst = 6, /*FIXME eth1 shares gpio6 with dsp?*/
-+ .gpio_int = 35,
-+ .cs = 2,
-+ .ext_irq = 2,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "Livebox-blue-5g::adsl-fail",
-+ .gpio = 0,
-+ .active_low = 0,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "Livebox-blue-5g::adsl",
-+ .gpio = 1,
-+ },
-+ {
-+ .name = "Livebox-blue-5g::traffic",
-+ .gpio = 2,
-+ },
-+ {
-+ .name = "Livebox-blue-5g::phone",
-+ .gpio = 3,
-+ },
-+ {
-+ .name = "Livebox-blue-5g::wifi",
-+ .gpio = 4,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "BTN_1",
-+ .gpio = 36,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = BTN_1,
-+ .debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "BTN_2",
-+ .gpio = 7,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = BTN_2,
-+ .debounce_interval = LIVEBOX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+
-+ },
-+};
-+#endif
-+
-+/*
-+ * all boards
-+ */
-+static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6348
-+ &board_livebox_blue5g
-+#endif
-+};
-+/*
-+ * return board name for /proc/cpuinfo
-+ */
-+const char *board_get_name(void)
-+{
-+ return board.name;
-+}
-+
-+/*
-+ * register & return a new board mac address
-+ */
-+static int board_get_mac_address(u8 *mac)
-+{
-+ u8 *p;
-+ int count;
-+
-+ memcpy(mac, (u8 *)0xBEBFF377, ETH_ALEN);
-+
-+ p = mac + ETH_ALEN - 1;
-+ count = mac_addr_used;
-+
-+ while (count--) {
-+ do {
-+ (*p)++;
-+ if (*p != 0)
-+ break;
-+ p--;
-+ } while (p != mac);
-+ }
-+
-+ if (p == mac) {
-+ printk(KERN_ERR PFX "unable to fetch mac address\n");
-+ return -ENODEV;
-+ }
-+ mac_addr_used++;
-+
-+ return 0;
-+}
-+
-+/*
-+ * early init callback
-+ */
-+#define LIVEBOX_GPIO_DETECT_MASK 0x000000ff
-+#define LIVEBOX_BOOT_ADDR 0x1e400000
-+
-+#define LIVEBOX_HW_BLUE5G_9 0x90
-+
-+void __init board_prom_init(void)
-+{
-+ u32 val;
-+ u8 hw_version;
-+
-+ /* Get hardware version */
-+ val = bcm_gpio_readl(GPIO_CTL_LO_REG);
-+ val &= ~LIVEBOX_GPIO_DETECT_MASK;
-+ bcm_gpio_writel(val, GPIO_CTL_LO_REG);
-+
-+ hw_version = bcm_gpio_readl(GPIO_DATA_LO_REG) & LIVEBOX_GPIO_DETECT_MASK;
-+ switch (hw_version) {
-+ case LIVEBOX_HW_BLUE5G_9:
-+ printk(KERN_INFO PFX "Livebox BLUE5G.9\n");
-+ memcpy(&board, bcm963xx_boards[0], sizeof(board));
-+ break;
-+ default:
-+ printk(KERN_INFO PFX "Unknown livebox version: %02x\n", hw_version);
-+ break;
-+ }
-+
-+ /* use default livebox configuration */
-+ memcpy(&board, bcm963xx_boards[0], sizeof(board));
-+
-+ /* setup pin multiplexing depending on board enabled device,
-+ * this has to be done this early since PCI init is done
-+ * inside arch_initcall */
-+ val = 0;
-+
-+#ifdef CONFIG_PCI
-+ if (board.has_pci) {
-+ if (BCMCPU_IS_6348())
-+ val |= GPIO_MODE_6348_G2_PCI;
-+ }
-+#endif
-+ if (board.has_pccard) {
-+ if (BCMCPU_IS_6348())
-+ val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+ }
-+
-+ if (board.has_enet0 && !board.enet0.use_internal_phy) {
-+ if (BCMCPU_IS_6348())
-+ val |= GPIO_MODE_6348_G3_EXT_MII |
-+ GPIO_MODE_6348_G0_EXT_MII;
-+ }
-+
-+ if (board.has_enet1 && !board.enet1.use_internal_phy) {
-+ if (BCMCPU_IS_6348())
-+ val |= GPIO_MODE_6348_G3_EXT_MII |
-+ GPIO_MODE_6348_G0_EXT_MII;
-+ printk(KERN_INFO PFX "resetting gpio6 for eth1...\n");
-+ gpio_request(6, "dsp_eth_rst");
-+ gpio_direction_output(6, 0);
-+ gpio_set_value(6, 1);
-+ }
-+
-+ bcm_gpio_writel(val, GPIO_MODE_REG);
-+}
-+
-+/*
-+ * second stage init callback, good time to panic if we couldn't
-+ * identify on which board we're running since early printk is working
-+ */
-+void __init board_setup(void)
-+{
-+ if (!board.name[0])
-+ panic("unable to detect bcm963xx board");
-+ printk(KERN_INFO PFX "board name: %s\n", board.name);
-+
-+ /* make sure we're running on expected cpu */
-+ if (bcm63xx_get_cpu_id() != board.expected_cpu_id)
-+ panic("unexpected CPU for bcm963xx board");
-+}
-+
-+static struct physmap_flash_data flash_data = {
-+ .width = 2,
-+};
-+
-+static struct resource mtd_resources[] = {
-+ {
-+ .start = 0, /* filled at runtime */
-+ .end = 0, /* filled at runtime */
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct platform_device mtd_dev = {
-+ .name = "physmap-flash",
-+ .resource = mtd_resources,
-+ .num_resources = ARRAY_SIZE(mtd_resources),
-+ .dev = {
-+ .platform_data = &flash_data,
-+ },
-+};
-+
-+static struct gpio_led_platform_data bcm63xx_led_data;
-+
-+static struct platform_device bcm63xx_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = 0,
-+ .dev.platform_data = &bcm63xx_led_data,
-+};
-+
-+static struct gpio_keys_platform_data bcm63xx_gpio_keys_data = {
-+ .poll_interval = LIVEBOX_KEYS_POLL_INTERVAL,
-+};
-+
-+static struct platform_device bcm63xx_gpio_keys_device = {
-+ .name = "gpio-keys-polled",
-+ .id = 0,
-+ .dev.platform_data = &bcm63xx_gpio_keys_data,
-+};
-+
-+/*
-+ * third stage init callback, register all board devices.
-+ */
-+int __init board_register_devices(void)
-+{
-+ u32 val;
-+ int led_count = 0;
-+ int button_count = 0;
-+
-+ if (board.has_uart0)
-+ bcm63xx_uart_register(0);
-+
-+ if (board.has_uart1)
-+ bcm63xx_uart_register(1);
-+
-+ if (board.has_pccard)
-+ bcm63xx_pcmcia_register();
-+
-+ if (board.has_enet0 &&
-+ !board_get_mac_address(board.enet0.mac_addr))
-+ bcm63xx_enet_register(0, &board.enet0);
-+
-+ if (board.has_enet1 &&
-+ !board_get_mac_address(board.enet1.mac_addr))
-+ bcm63xx_enet_register(1, &board.enet1);
-+
-+ if (board.has_ehci0)
-+ bcm63xx_ehci_register();
-+
-+ if (board.has_ohci0)
-+ bcm63xx_ohci_register();
-+
-+ if (board.has_dsp)
-+ bcm63xx_dsp_register(&board.dsp);
-+
-+ bcm63xx_spi_register();
-+
-+ if (board.num_devs)
-+ platform_add_devices(board.devs, board.num_devs);
-+
-+ if (board.num_spis)
-+ spi_register_board_info(board.spis, board.num_spis);
-+
-+
-+ /* read base address of boot chip select (0) */
-+ val = bcm_mpi_readl(MPI_CSBASE_REG(0));
-+ val &= MPI_CSBASE_BASE_MASK;
-+ if (val != LIVEBOX_BOOT_ADDR)
-+ printk(KERN_NOTICE PFX "flash address is: 0x%08x, forcing to: 0x%08x\n",
-+ val, LIVEBOX_BOOT_ADDR);
-+ mtd_resources[0].start = LIVEBOX_BOOT_ADDR;
-+ mtd_resources[0].end = 0x1ebfffff;
-+
-+ platform_device_register(&mtd_dev);
-+
-+ /* count number of LEDs defined by this device */
-+ while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name)
-+ led_count++;
-+
-+ bcm63xx_led_data.num_leds = led_count;
-+ bcm63xx_led_data.leds = board.leds;
-+
-+ platform_device_register(&bcm63xx_gpio_leds);
-+
-+ /* count number of BUTTONs defined by this device */
-+ while (button_count < ARRAY_SIZE(board.buttons) && board.buttons[button_count].desc)
-+ button_count++;
-+
-+ if (button_count) {
-+ bcm63xx_gpio_keys_data.nbuttons = button_count;
-+ bcm63xx_gpio_keys_data.buttons = board.buttons;
-+
-+ platform_device_register(&bcm63xx_gpio_keys_device);
-+ }
-+
-+ return 0;
-+}
diff --git a/target/linux/brcm63xx/patches-3.3/514-board_ct536_ct5621.patch b/target/linux/brcm63xx/patches-3.3/514-board_ct536_ct5621.patch
deleted file mode 100644
index 43a5a490f7..0000000000
--- a/target/linux/brcm63xx/patches-3.3/514-board_ct536_ct5621.patch
+++ /dev/null
@@ -1,60 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -452,6 +452,49 @@ static struct board_info __initdata boar
- };
-
-
-+static struct board_info __initdata board_ct536_ct5621 = {
-+ .name = "CT536_CT5621",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 0,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "CT536_CT5621:green:adsl-fail",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CT536_CT5621:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 33,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
-+
- static struct board_info __initdata board_96348gw = {
- .name = "96348GW",
- .expected_cpu_id = 0x6348,
-@@ -1988,6 +2031,7 @@ static const struct board_info __initdat
- &board_96348sv,
- &board_V2500V_BB,
- &board_V2110,
-+ &board_ct536_ct5621,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.3/515-board_DWV-S0_fixes.patch b/target/linux/brcm63xx/patches-3.3/515-board_DWV-S0_fixes.patch
deleted file mode 100644
index 9c73e91567..0000000000
--- a/target/linux/brcm63xx/patches-3.3/515-board_DWV-S0_fixes.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1211,6 +1211,8 @@ static struct board_info __initdata boar
- .name = "DWV-S0",
- .expected_cpu_id = 0x6358,
-
-+ .has_uart0 = 1,
-+
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
-@@ -1226,6 +1228,7 @@ static struct board_info __initdata boar
- },
-
- .has_ohci0 = 1,
-+ .has_ehci0 = 1,
- };
-
- /* D-Link DSL-274xB revison C2/C3 */
diff --git a/target/linux/brcm63xx/patches-3.3/516-board_96348A-122.patch b/target/linux/brcm63xx/patches-3.3/516-board_96348A-122.patch
deleted file mode 100644
index f3a9bfc456..0000000000
--- a/target/linux/brcm63xx/patches-3.3/516-board_96348A-122.patch
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -495,6 +495,67 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_96348A_122 = {
-+ .name = "96348A-122",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "96348A-122:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "96348A-122:red:alarm",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96348A-122:green:wps",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 33,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "wlan",
-+ .gpio = 34,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_WLAN,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 35,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
-+
- static struct board_info __initdata board_96348gw = {
- .name = "96348GW",
- .expected_cpu_id = 0x6348,
-@@ -2035,6 +2096,7 @@ static const struct board_info __initdat
- &board_V2500V_BB,
- &board_V2110,
- &board_ct536_ct5621,
-+ &board_96348A_122,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.3/517-RTA1205W_16_uart_fixes.patch b/target/linux/brcm63xx/patches-3.3/517-RTA1205W_16_uart_fixes.patch
deleted file mode 100644
index 95082c8b8f..0000000000
--- a/target/linux/brcm63xx/patches-3.3/517-RTA1205W_16_uart_fixes.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -758,6 +758,7 @@ static struct board_info __initdata boar
- .name = "RTA1025W_16",
- .expected_cpu_id = 0x6348,
-
-+ .has_uart0 = 1,
- .has_enet0 = 1,
- .has_enet1 = 1,
- .has_pci = 1,
diff --git a/target/linux/brcm63xx/patches-3.3/519_board_CPVA502plus.patch b/target/linux/brcm63xx/patches-3.3/519_board_CPVA502plus.patch
deleted file mode 100644
index 3da5602fc8..0000000000
--- a/target/linux/brcm63xx/patches-3.3/519_board_CPVA502plus.patch
+++ /dev/null
@@ -1,55 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1050,6 +1050,44 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_CPVA502plus = {
-+ .name = "CPVA502+",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 1,
-+ .use_internal_phy = 1,
-+ },
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "CPVA502+:green:phone",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CPVA502+:green:link",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CPVA502+:green:feth1", /* FIXME:does gpio4 enable eth1 phy? */
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ },
-+};
-+
- #endif
-
- /*
-@@ -2098,6 +2136,7 @@ static const struct board_info __initdat
- &board_V2110,
- &board_ct536_ct5621,
- &board_96348A_122,
-+ &board_CPVA502plus,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch b/target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch
deleted file mode 100644
index 2e315e564c..0000000000
--- a/target/linux/brcm63xx/patches-3.3/520-bcm63xx-add-support-for-96368MVWG-board.patch
+++ /dev/null
@@ -1,128 +0,0 @@
-From eeacc2529942051504bc957726aa178671344421 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Wed, 20 Jan 2010 16:21:30 +0100
-Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 95 ++++++++++++++++++++
- .../mips/include/asm/mach-bcm63xx/board_bcm963xx.h | 2 +
- 2 files changed, 97 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2106,6 +2106,78 @@ static struct board_info __initdata boar
- #endif
-
- /*
-+ * known 6368 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+static struct board_info __initdata board_96368mvwg = {
-+ .name = "96368MVWG",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_uart0 = 1,
-+ .has_pci = 1,
-+ .has_enetsw = 1,
-+
-+ .enetsw = {
-+ .used_ports = {
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "port1",
-+ },
-+
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "port2",
-+ },
-+
-+ [4] = {
-+ .used = 1,
-+ .phy_id = 0x12,
-+ .name = "port0",
-+ },
-+
-+ [5] = {
-+ .used = 1,
-+ .phy_id = 0x11,
-+ .name = "port3",
-+ },
-+ },
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "96368MVWG:green:adsl",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96368MVWG:green:ppp",
-+ .gpio = 5,
-+ },
-+ {
-+ .name = "96368MVWG:green:power",
-+ .gpio = 22,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "96368MVWG:green:wps",
-+ .gpio = 23,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96368MVWG:green:ppp-fail",
-+ .gpio = 31,
-+ },
-+ },
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+};
-+#endif
-+
-+/*
- * all boards
- */
- static const struct board_info __initdata *bcm963xx_boards[] = {
-@@ -2154,6 +2226,10 @@ static const struct board_info __initdat
- &board_HW553,
- &board_spw303v,
- #endif
-+
-+#ifdef CONFIG_BCM63XX_CPU_6368
-+ &board_96368mvwg,
-+#endif
- };
-
- /*
-@@ -2325,12 +2401,25 @@ void __init board_prom_init(void)
- bcm63xx_pci_enabled = 1;
- if (BCMCPU_IS_6348())
- val |= GPIO_MODE_6348_G2_PCI;
-+
-+ if (BCMCPU_IS_6368())
-+ val |= GPIO_MODE_6368_PCI_REQ1 |
-+ GPIO_MODE_6368_PCI_GNT1 |
-+ GPIO_MODE_6368_PCI_INTB |
-+ GPIO_MODE_6368_PCI_REQ0 |
-+ GPIO_MODE_6368_PCI_GNT0;
- }
- #endif
-
- if (board.has_pccard) {
- if (BCMCPU_IS_6348())
- val |= GPIO_MODE_6348_G1_MII_PCCARD;
-+
-+ if (BCMCPU_IS_6368())
-+ val |= GPIO_MODE_6368_PCMCIA_CD1 |
-+ GPIO_MODE_6368_PCMCIA_CD2 |
-+ GPIO_MODE_6368_PCMCIA_VS1 |
-+ GPIO_MODE_6368_PCMCIA_VS2;
- }
-
- if (board.has_enet0 && !board.enet0.use_internal_phy) {
diff --git a/target/linux/brcm63xx/patches-3.3/521-bcm63xx-add-support-for-96368MVNgr-board.patch b/target/linux/brcm63xx/patches-3.3/521-bcm63xx-add-support-for-96368MVNgr-board.patch
deleted file mode 100644
index 45f3b0b0b6..0000000000
--- a/target/linux/brcm63xx/patches-3.3/521-bcm63xx-add-support-for-96368MVNgr-board.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From f457fc2eb9bb915b5a4d251c7c68d4694cf07b01 Mon Sep 17 00:00:00 2001
-From: Maxime Bizon <mbizon@freebox.fr>
-Date: Fri, 4 Nov 2011 12:33:48 +0100
-Subject: [PATCH 33/63] bcm63xx: add support for 96368MVNgr board.
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 67 +++++++++++++++++++++++++++++
- 1 files changed, 67 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2175,6 +2175,72 @@ static struct board_info __initdata boar
- .has_ohci0 = 1,
- .has_ehci0 = 1,
- };
-+
-+static struct board_info __initdata board_96368mvngr = {
-+ .name = "96368MVNgr",
-+ .expected_cpu_id = 0x6368,
-+
-+ .has_uart0 = 1,
-+ .has_pci = 1,
-+ .has_enetsw = 1,
-+
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "port1",
-+ },
-+
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "port2",
-+ },
-+
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "port3",
-+ },
-+
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "port4",
-+ },
-+ },
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "96368MVNgr:green:adsl",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96368MVNgr:green:inet",
-+ .gpio = 5,
-+ },
-+ {
-+ .name = "96368MVNgr:green:power",
-+ .gpio = 22,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "96368MVNgr:green:wps",
-+ .gpio = 23,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96368MVNgr:green:inet-fail",
-+ .gpio = 3,
-+ },
-+ },
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+};
- #endif
-
- /*
-@@ -2229,6 +2295,7 @@ static const struct board_info __initdat
-
- #ifdef CONFIG_BCM63XX_CPU_6368
- &board_96368mvwg,
-+ &board_96368mvngr,
- #endif
- };
-
diff --git a/target/linux/brcm63xx/patches-3.3/522-MIPS-BCM63XX-add-96328avng-reference-board.patch b/target/linux/brcm63xx/patches-3.3/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
deleted file mode 100644
index 8828ac13dc..0000000000
--- a/target/linux/brcm63xx/patches-3.3/522-MIPS-BCM63XX-add-96328avng-reference-board.patch
+++ /dev/null
@@ -1,102 +0,0 @@
-From c93c2bbf0cc96da5a47d77f01daf6c983cfe4216 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 10:52:25 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 96328avng reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 77 +++++++++++++++++++++++++++++
- 1 files changed, 77 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -55,6 +55,80 @@
- static struct board_info board;
-
- /*
-+ * known 6328 boards
-+ */
-+#ifdef CONFIG_BCM63XX_CPU_6328
-+static struct board_info __initdata board_96328avng = {
-+ .name = "96328avng",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_uart0 = 1,
-+ .has_pci = 1,
-+
-+ .has_enetsw = 1,
-+
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "96328avng::internet-fail",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96328avng::dsl",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96328avng::power",
-+ .gpio = 4,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "96328avng::power-fail",
-+ .gpio = 8,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96328avng::wps",
-+ .gpio = 9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96328avng::internet",
-+ .gpio = 11,
-+ .active_low = 1,
-+ },
-+ },
-+};
-+#endif
-+
-+/*
- * known 6338 boards
- */
- #ifdef CONFIG_BCM63XX_CPU_6338
-@@ -2247,6 +2321,9 @@ static struct board_info __initdata boar
- * all boards
- */
- static const struct board_info __initdata *bcm963xx_boards[] = {
-+#ifdef CONFIG_BCM63XX_CPU_6328
-+ &board_96328avng,
-+#endif
- #ifdef CONFIG_BCM63XX_CPU_6338
- &board_96338gw,
- &board_96338w,
diff --git a/target/linux/brcm63xx/patches-3.3/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch b/target/linux/brcm63xx/patches-3.3/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
deleted file mode 100644
index e3bc61e686..0000000000
--- a/target/linux/brcm63xx/patches-3.3/523-MIPS-BCM63XX-add-963281TAN-reference-board.patch
+++ /dev/null
@@ -1,96 +0,0 @@
-From f0649f7b7c672cf452a1796a1422bf615e1973f8 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Tue, 29 May 2012 11:01:12 +0200
-Subject: [PATCH] MIPS: BCM63XX: add 963281TAN reference board
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 71 +++++++++++++++++++++++++++++
- 1 files changed, 71 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -126,6 +126,76 @@ static struct board_info __initdata boar
- },
- },
- };
-+
-+static struct board_info __initdata board_963281TAN = {
-+ .name = "963281TAN",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_uart0 = 1,
-+ .has_pci = 1,
-+
-+ .has_enetsw = 1,
-+
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "963281TAN::internet",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281TAN::power",
-+ .gpio = 4,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "963281TAN::internet-fail",
-+ .gpio = 7,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281TAN::power-fail",
-+ .gpio = 8,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281TAN::wps",
-+ .gpio = 9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281TAN::dsl",
-+ .gpio = 11,
-+ .active_low = 1,
-+ },
-+
-+ },
-+};
- #endif
-
- /*
-@@ -2323,6 +2393,7 @@ static struct board_info __initdata boar
- static const struct board_info __initdata *bcm963xx_boards[] = {
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
-+ &board_963281TAN,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
- &board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.3/524-board_dsl_274xb_rev_f.patch b/target/linux/brcm63xx/patches-3.3/524-board_dsl_274xb_rev_f.patch
deleted file mode 100644
index ec0efca946..0000000000
--- a/target/linux/brcm63xx/patches-3.3/524-board_dsl_274xb_rev_f.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From 66808f706b3dcd83a9f5157997ff478a880a2906 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Mon, 30 Apr 2012 09:10:51 +0200
-Subject: [PATCH 70/79] MIPS: BCM63XX: Add board definition for D-Link
- DSL-274xB rev F1
-
----
- arch/mips/bcm63xx/boards/board_bcm963xx.c | 104 +++++++++++++++++++++++++++++
- 1 files changed, 104 insertions(+), 0 deletions(-)
-
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -196,6 +196,111 @@ static struct board_info __initdata boar
-
- },
- };
-+
-+static struct board_info __initdata board_dsl_274xb_f1 = {
-+ .name = "AW4339U",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_uart0 = 1,
-+ .has_pci = 1,
-+
-+ .has_caldata = 1,
-+ .caldata = {
-+ {
-+ .vendor = PCI_VENDOR_ID_ATHEROS,
-+ .caldata_offset = 0x7d1000,
-+ .slot = 0,
-+ .led_pin = -1,
-+ },
-+ },
-+
-+ .has_enetsw = 1,
-+
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 4",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 3",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 2",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 1",
-+ },
-+ },
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "dsl-274xb:red:internet",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "dsl-274xb:green:dsl",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "dsl-274xb:green:power",
-+ .gpio = 4,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "dsl-274xb:red:power",
-+ .gpio = 8,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "dsl-274xb:blue:wps",
-+ .gpio = 9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "dsl-274xb:green:internet",
-+ .gpio = 11,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "wifi",
-+ .gpio = 10,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "reset",
-+ .gpio = 23,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 24,
-+ .active_low = 1,
-+ .code = KEY_WPS_BUTTON,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -2394,6 +2499,7 @@ static const struct board_info __initdat
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
- &board_963281TAN,
-+ &board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
- &board_96338gw,
diff --git a/target/linux/brcm63xx/patches-3.3/525-board_96348w3.patch b/target/linux/brcm63xx/patches-3.3/525-board_96348w3.patch
deleted file mode 100644
index 2e249f0f94..0000000000
--- a/target/linux/brcm63xx/patches-3.3/525-board_96348w3.patch
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1337,6 +1337,57 @@ static struct board_info __initdata boar
- },
- };
-
-+/* NetGear DG834G v4 */
-+static struct board_info __initdata board_96348W3 = {
-+ .name = "96348W3",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .has_ohci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "96348W3:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "96348W3:red:power",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96348W3::adsl",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96348W3::internet",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 6,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
-+
- #endif
-
- /*
-@@ -2529,6 +2580,7 @@ static const struct board_info __initdat
- &board_ct536_ct5621,
- &board_96348A_122,
- &board_CPVA502plus,
-+ &board_96348W3,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6358
diff --git a/target/linux/brcm63xx/patches-3.3/526-board_CT6373-1.patch b/target/linux/brcm63xx/patches-3.3/526-board_CT6373-1.patch
deleted file mode 100644
index 20ef1e5be4..0000000000
--- a/target/linux/brcm63xx/patches-3.3/526-board_CT6373-1.patch
+++ /dev/null
@@ -1,136 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -52,6 +52,13 @@
- #define NB4_SPI_GPIO_CLK 6
- #define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
-
-+#define CT6373_PID_OFFSET 0xff80
-+#define CT6373_74X164_GPIO_BASE 64
-+#define CT6373_SPI_GPIO_MOSI 7
-+#define CT6373_SPI_GPIO_CLK 6
-+#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
-+
-+
- static struct board_info board;
-
- /*
-@@ -2264,6 +2271,111 @@ static struct board_info __initdata boar
- .num_spis = ARRAY_SIZE(nb4_spi_devices),
- };
-
-+
-+struct spi_gpio_platform_data ct6373_spi_gpio_data = {
-+ .sck = CT6373_SPI_GPIO_CLK,
-+ .mosi = CT6373_SPI_GPIO_MOSI,
-+ .miso = SPI_GPIO_NO_MISO,
-+ .num_chipselect = 1,
-+};
-+
-+static struct platform_device ct6373_spi_gpio = {
-+ .name = "spi_gpio",
-+ .id = 1,
-+ .dev = {
-+ .platform_data = &ct6373_spi_gpio_data,
-+ },
-+};
-+
-+static struct platform_device * __initdata ct6373_devices[] = {
-+ &ct6373_spi_gpio,
-+};
-+
-+const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
-+ .base = CT6373_74X164_GPIO_BASE
-+};
-+
-+static struct spi_board_info ct6373_spi_devices[] = {
-+ {
-+ .modalias = "74x164",
-+ .max_speed_hz = 781000,
-+ .bus_num = 1,
-+ .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
-+ .mode = SPI_MODE_0,
-+ .platform_data = &ct6373_74x164_platform_data
-+ }
-+};
-+
-+static struct board_info __initdata board_ct6373_1 = {
-+ .name = "CT6373-1",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "CT6373-1:green:power",
-+ .gpio = 0,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "CT6373-1:green:usb",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CT6373-1:green:wlan",
-+ .gpio = 9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CT6373-1:green:adsl",
-+ .gpio = CT6373_74HC64_GPIO(0),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CT6373-1:green:line",
-+ .gpio = CT6373_74HC64_GPIO(1),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CT6373-1:green:fxs1",
-+ .gpio = CT6373_74HC64_GPIO(2),
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "CT6373-1:green:fxs2",
-+ .gpio = CT6373_74HC64_GPIO(3),
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 35,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+
-+ .devs = ct6373_devices,
-+ .num_devs = ARRAY_SIZE(ct6373_devices),
-+ .spis = ct6373_spi_devices,
-+ .num_spis = ARRAY_SIZE(ct6373_spi_devices),
-+};
-+
- static struct board_info __initdata board_HW553 = {
- .name = "HW553",
- .expected_cpu_id = 0x6358,
-@@ -2595,6 +2707,7 @@ static const struct board_info __initdat
- &board_nb4_ser_r2,
- &board_nb4_fxc_r1,
- &board_nb4_fxc_r2,
-+ &board_ct6373_1,
- &board_HW553,
- &board_spw303v,
- #endif
diff --git a/target/linux/brcm63xx/patches-3.3/527-board_dva-g3810bn-tl-1.patch b/target/linux/brcm63xx/patches-3.3/527-board_dva-g3810bn-tl-1.patch
deleted file mode 100644
index 19ffc13ad7..0000000000
--- a/target/linux/brcm63xx/patches-3.3/527-board_dva-g3810bn-tl-1.patch
+++ /dev/null
@@ -1,82 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -2515,6 +2515,71 @@ static struct board_info __initdata boar
- },
- }
- };
-+
-+/* D-Link DVA-G3810BN/TL */
-+static struct board_info __initdata board_DVAG3810BN = {
-+ .name = "DVAG3810BN",
-+ .expected_cpu_id = 0x6358,
-+
-+ .has_uart0 = 1,
-+ .has_enet0 = 1,
-+ .has_enet1 = 1,
-+ .has_pci = 1,
-+
-+ .enet0 = {
-+ .has_phy = 0,
-+ .use_internal_phy = 1,
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+
-+ .has_ohci0 = 1,
-+ .has_pccard = 1,
-+ .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "DVAG3810BN::voip",
-+ .gpio = 1,
-+ },
-+ {
-+ .name = "DVAG3810BN::dsl",
-+ .gpio = 22,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "DVAG3810BN::internet",
-+ .gpio = 23,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "DVAG3810BN::power",
-+ .gpio = 4,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "DVAG3810BN::stop",
-+ .gpio = 5,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 34,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -2710,6 +2775,7 @@ static const struct board_info __initdat
- &board_ct6373_1,
- &board_HW553,
- &board_spw303v,
-+ &board_DVAG3810BN,
- #endif
-
- #ifdef CONFIG_BCM63XX_CPU_6368
diff --git a/target/linux/brcm63xx/patches-3.3/528-board_nb6.patch b/target/linux/brcm63xx/patches-3.3/528-board_nb6.patch
deleted file mode 100644
index 297759f109..0000000000
--- a/target/linux/brcm63xx/patches-3.3/528-board_nb6.patch
+++ /dev/null
@@ -1,146 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -17,6 +17,7 @@
- #include <linux/spi/spi.h>
- #include <linux/spi/spi_gpio.h>
- #include <linux/spi/74x164.h>
-+#include <linux/rtl8367.h>
- #include <asm/addrspace.h>
- #include <bcm63xx_board.h>
- #include <bcm63xx_cpu.h>
-@@ -51,6 +52,8 @@
- #define NB4_SPI_GPIO_MOSI 7
- #define NB4_SPI_GPIO_CLK 6
- #define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
-+#define NB6_GPIO_RTL8367_SDA 18
-+#define NB6_GPIO_RTL8367_SCK 20
-
- #define CT6373_PID_OFFSET 0xff80
- #define CT6373_74X164_GPIO_BASE 64
-@@ -2582,6 +2585,103 @@ static struct board_info __initdata boar
- };
- #endif
-
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+static struct rtl8367_extif_config nb6_rtl8367_extif0_cfg = {
-+ .mode = RTL8367_EXTIF_MODE_RGMII,
-+ .txdelay = 1,
-+ .rxdelay = 5,
-+ .ability = {
-+ .force_mode = 1,
-+ .txpause = 1,
-+ .rxpause = 1,
-+ .link = 1,
-+ .duplex = 1,
-+ .speed = RTL8367_PORT_SPEED_1000,
-+ },
-+};
-+
-+static struct rtl8367_platform_data nb6_rtl8367_data = {
-+ .gpio_sda = NB6_GPIO_RTL8367_SDA,
-+ .gpio_sck = NB6_GPIO_RTL8367_SCK,
-+ .extif0_cfg = &nb6_rtl8367_extif0_cfg,
-+};
-+
-+static struct platform_device nb6_rtl8367_device = {
-+ .name = RTL8367_DRIVER_NAME,
-+ .id = -1,
-+ .dev = {
-+ .platform_data = &nb6_rtl8367_data,
-+ }
-+};
-+
-+static struct platform_device * __initdata nb6_devices[] = {
-+ &nb6_rtl8367_device,
-+};
-+
-+static struct board_info __initdata board_nb6 = {
-+ .name = "NB6",
-+ .expected_cpu_id = 0x6362,
-+
-+ .has_uart0 = 1,
-+
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+
-+ .has_enetsw = 1,
-+
-+ .enetsw = {
-+ .used_ports = {
-+ [4] = {
-+ .used = 1,
-+ .phy_id = 0xff,
-+ .bypass_link = 1,
-+ .force_speed = 1000,
-+ .force_duplex_full = 1,
-+ .name = "RGMII",
-+ },
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 24,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ .active_low = 1,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 25,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ .active_low = 1,
-+ },
-+ {
-+ .desc = "wlan",
-+ .gpio = 12,
-+ .type = EV_KEY,
-+ .code = KEY_WLAN,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ .active_low = 1,
-+ },
-+ {
-+ .desc = "service",
-+ .gpio = 10,
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .devs = nb6_devices,
-+ .num_devs = ARRAY_SIZE(nb6_devices),
-+};
-+#endif
-+
- /*
- * known 6368 boards
- */
-@@ -2778,6 +2878,10 @@ static const struct board_info __initdat
- &board_DVAG3810BN,
- #endif
-
-+#ifdef CONFIG_BCM63XX_CPU_6362
-+ &board_nb6,
-+#endif
-+
- #ifdef CONFIG_BCM63XX_CPU_6368
- &board_96368mvwg,
- &board_96368mvngr,
-@@ -2845,6 +2949,11 @@ static void __init boardid_fixup(u8 *boo
- }
- }
-
-+ if (BCMCPU_IS_6362() && (!strncmp(board_name, "NB6-", sizeof("NB6-") - 1))) {
-+ board_name[sizeof("NB6") - 1] = '\0';
-+ return ;
-+ }
-+
- /* check if bcm_tag is at 64k offset */
- if (strncmp(board_name, tag->board_id, BOARDID_LEN) != 0) {
- /* else try 128k */
diff --git a/target/linux/brcm63xx/patches-3.3/529-board_fast2604.patch b/target/linux/brcm63xx/patches-3.3/529-board_fast2604.patch
deleted file mode 100644
index c09e07f0ea..0000000000
--- a/target/linux/brcm63xx/patches-3.3/529-board_fast2604.patch
+++ /dev/null
@@ -1,66 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1013,6 +1013,55 @@ static struct board_info __initdata boar
- .has_ehci0 = 1,
- };
-
-+static struct board_info __initdata board_FAST2604 = {
-+ .name = "F@ST2604",
-+ .expected_cpu_id = 0x6348,
-+
-+ .has_uart0 = 1,
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+
-+ .has_enet1 = 1,
-+ .enet1 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "F@ST2604:green:power",
-+ .gpio = 0,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "F@ST2604:red:power",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "F@ST2604:red:inet",
-+ .gpio = 4,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "F@ST2604:green:wps",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ },
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 33,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
-+
- static struct board_info __initdata board_rta1025w_16 = {
- .name = "RTA1025W_16",
- .expected_cpu_id = 0x6348,
-@@ -2846,6 +2895,7 @@ static const struct board_info __initdat
- &board_96348gw_10,
- &board_96348gw_11,
- &board_FAST2404,
-+ &board_FAST2604,
- &board_DV201AMR,
- &board_96348gw_a,
- &board_rta1025w_16,
diff --git a/target/linux/brcm63xx/patches-3.3/530-board_963281T_TEF.patch b/target/linux/brcm63xx/patches-3.3/530-board_963281T_TEF.patch
deleted file mode 100644
index acd4ca49b1..0000000000
--- a/target/linux/brcm63xx/patches-3.3/530-board_963281T_TEF.patch
+++ /dev/null
@@ -1,136 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -207,6 +207,125 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_963281T_TEF = {
-+ .name = "963281T_TEF",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_uart0 = 1,
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .has_enetsw = 1,
-+
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "963281T_TEF:green:power",
-+ .gpio = 4,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "963281T_TEF:red:power",
-+ .gpio = 8,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281T_TEF:green:inet",
-+ .gpio = 11,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281T_TEF:red:inet",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281T_TEF:green:ppp",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281T_TEF:red:ppp",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281T_TEF:green:3g",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281T_TEF:red:3g",
-+ .gpio = 7,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281T_TEF:green:wlan",
-+ .gpio = 9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281T_TEF:red:wlan",
-+ .gpio = 10,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281T_TEF:green:eth",
-+ .gpio = 31,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "963281T_TEF:red:eth",
-+ .gpio = 20,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 23,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "wlan",
-+ .gpio = 24,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_WLAN,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
-+
- static struct board_info __initdata board_dsl_274xb_f1 = {
- .name = "AW4339U",
- .expected_cpu_id = 0x6328,
-@@ -2876,6 +2995,7 @@ static const struct board_info __initdat
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
- &board_963281TAN,
-+ &board_963281T_TEF,
- &board_dsl_274xb_f1,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6338
diff --git a/target/linux/brcm63xx/patches-3.3/531-board_96328A-1441N1.patch b/target/linux/brcm63xx/patches-3.3/531-board_96328A-1441N1.patch
deleted file mode 100644
index 82800a7bda..0000000000
--- a/target/linux/brcm63xx/patches-3.3/531-board_96328A-1441N1.patch
+++ /dev/null
@@ -1,89 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -137,6 +137,78 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_96328A_1441N1 = {
-+ .name = "96328A-1441N1",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_uart0 = 1,
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .has_enetsw = 1,
-+
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "96328A-1441N1:green:power",
-+ .gpio = 8,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "96328A-1441N1:red:power",
-+ .gpio = 4,
-+ },
-+ {
-+ .name = "96328A-1441N1:green:inet",
-+ .gpio = 7,
-+ },
-+ {
-+ .name = "96328A-1441N1:red:inet",
-+ .gpio = 1,
-+ },
-+ {
-+ .name = "96328A-1441N1:green:dsl",
-+ .gpio = 11,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 23,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
-+
- static struct board_info __initdata board_963281TAN = {
- .name = "963281TAN",
- .expected_cpu_id = 0x6328,
-@@ -2994,6 +3066,7 @@ static struct board_info __initdata boar
- static const struct board_info __initdata *bcm963xx_boards[] = {
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
-+ &board_96328A_1441N1,
- &board_963281TAN,
- &board_963281T_TEF,
- &board_dsl_274xb_f1,
diff --git a/target/linux/brcm63xx/patches-3.3/532-board_96328a-1241N.patch b/target/linux/brcm63xx/patches-3.3/532-board_96328a-1241N.patch
deleted file mode 100644
index 58a3deb0ff..0000000000
--- a/target/linux/brcm63xx/patches-3.3/532-board_96328a-1241N.patch
+++ /dev/null
@@ -1,83 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -137,6 +137,72 @@ static struct board_info __initdata boar
- },
- };
-
-+static struct board_info __initdata board_96328A_1241N = {
-+ .name = "96328A-1241N",
-+ .expected_cpu_id = 0x6328,
-+
-+ .has_uart0 = 1,
-+ .has_pci = 1,
-+ .has_ohci0 = 1,
-+ .has_ehci0 = 1,
-+ .has_enetsw = 1,
-+
-+ .enetsw = {
-+ .used_ports = {
-+ [0] = {
-+ .used = 1,
-+ .phy_id = 1,
-+ .name = "Port 1",
-+ },
-+ [1] = {
-+ .used = 1,
-+ .phy_id = 2,
-+ .name = "Port 2",
-+ },
-+ [2] = {
-+ .used = 1,
-+ .phy_id = 3,
-+ .name = "Port 3",
-+ },
-+ [3] = {
-+ .used = 1,
-+ .phy_id = 4,
-+ .name = "Port 4",
-+ },
-+ },
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "96328A-1241N:green:power",
-+ .gpio = 4,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "96328A-1241N:red:alarm",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96328A-1241N:green:inet",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 23,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
-+
- static struct board_info __initdata board_96328A_1441N1 = {
- .name = "96328A-1441N1",
- .expected_cpu_id = 0x6328,
-@@ -3066,6 +3132,7 @@ static struct board_info __initdata boar
- static const struct board_info __initdata *bcm963xx_boards[] = {
- #ifdef CONFIG_BCM63XX_CPU_6328
- &board_96328avng,
-+ &board_96328A_1241N,
- &board_96328A_1441N1,
- &board_963281TAN,
- &board_963281T_TEF,
diff --git a/target/linux/brcm63xx/patches-3.3/550-alice_gate2_leds.patch b/target/linux/brcm63xx/patches-3.3/550-alice_gate2_leds.patch
deleted file mode 100644
index 382e98e542..0000000000
--- a/target/linux/brcm63xx/patches-3.3/550-alice_gate2_leds.patch
+++ /dev/null
@@ -1,102 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1921,6 +1921,99 @@ static struct board_info __initdata boar
-
- .has_ohci0 = 1,
- .has_ehci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "AGPF-S0:red:power",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "AGPF-S0:green:power",
-+ .gpio = 4,
-+ .active_low = 1,
-+ .default_trigger = "default-on",
-+ },
-+ {
-+ .name = "AGPF-S0:red:service",
-+ .gpio = 7,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "AGPF-S0:green:service",
-+ .gpio = 6,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "AGPF-S0:green:adsl",
-+ .gpio = 9,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "AGPF-S0:red:adsl",
-+ .gpio = 10,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "AGPF-S0:red:wifi",
-+ .gpio = 23,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "AGPF-S0:green:wifi",
-+ .gpio = 22,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "AGPF-S0:green:internet",
-+ .gpio = 25,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "AGPF-S0:red:internet",
-+ .gpio = 24,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "AGPF-S0:red:usr1",
-+ .gpio = 27,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "AGPF-S0:green:usr1",
-+ .gpio = 26,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "AGPF-S0:red:usr2",
-+ .gpio = 30,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "AGPF-S0:green:usr2",
-+ .gpio = 29,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 37,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ {
-+ .desc = "wps",
-+ .gpio = 34,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_WPS_BUTTON,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
- };
-
- static struct board_info __initdata board_DWVS0 = {
diff --git a/target/linux/brcm63xx/patches-3.3/551-96348gw_a_leds.patch b/target/linux/brcm63xx/patches-3.3/551-96348gw_a_leds.patch
deleted file mode 100644
index 37d838b190..0000000000
--- a/target/linux/brcm63xx/patches-3.3/551-96348gw_a_leds.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1378,6 +1378,19 @@ static struct board_info __initdata boar
- },
-
- .has_ohci0 = 1,
-+
-+ .leds = {
-+ {
-+ .name = "96348GW-A::adsl",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "96348GW-A::usb",
-+ .gpio = 0,
-+ .active_low = 1,
-+ }
-+ },
- };
-
- static struct board_info __initdata board_96348_D4PW = {
diff --git a/target/linux/brcm63xx/patches-3.3/552-board_96348gw-10_reset_button.patch b/target/linux/brcm63xx/patches-3.3/552-board_96348gw-10_reset_button.patch
deleted file mode 100644
index 9a551d9654..0000000000
--- a/target/linux/brcm63xx/patches-3.3/552-board_96348gw-10_reset_button.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -846,6 +846,17 @@ static struct board_info __initdata boar
- .active_low = 1,
- },
- },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 6,
-+ .active_low = 1,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
- };
-
- static struct board_info __initdata board_96348gw_11 = {
diff --git a/target/linux/brcm63xx/patches-3.3/553-board_rta770bw.patch b/target/linux/brcm63xx/patches-3.3/553-board_rta770bw.patch
deleted file mode 100644
index 9de0997674..0000000000
--- a/target/linux/brcm63xx/patches-3.3/553-board_rta770bw.patch
+++ /dev/null
@@ -1,64 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -738,6 +738,53 @@ static struct board_info __initdata boar
-
- .has_uart0 = 1,
- };
-+
-+static struct board_info __initdata board_rta770bw = {
-+ .name = "RTA770BW",
-+ .expected_cpu_id = 0x6345,
-+
-+ .has_uart0 = 1,
-+
-+ .has_enet0 = 1,
-+
-+ .enet0 = {
-+ .force_speed_100 = 1,
-+ .force_duplex_full = 1,
-+ },
-+
-+ .leds = {
-+ {
-+ .name = "RTA770BW:green:usb",
-+ .gpio = 7,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "RTA770BW:green:adsl",
-+ .gpio = 8,
-+ },
-+ {
-+ .name = "RTA770BW:green:diag",
-+ .gpio = 10,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "RTA770BW:green:wlan",
-+ .gpio = 11,
-+ .active_low = 1,
-+ },
-+ },
-+
-+ .buttons = {
-+ {
-+ .desc = "reset",
-+ .gpio = 13,
-+ .type = EV_KEY,
-+ .code = KEY_RESTART,
-+ .active_low = 1,
-+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
-+ },
-+ },
-+};
- #endif
-
- /*
-@@ -3263,6 +3310,7 @@ static const struct board_info __initdat
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6345
- &board_96345gw2,
-+ &board_rta770bw,
- #endif
- #ifdef CONFIG_BCM63XX_CPU_6348
- &board_96348r,
diff --git a/target/linux/brcm63xx/patches-3.3/800-wl_exports.patch b/target/linux/brcm63xx/patches-3.3/800-wl_exports.patch
deleted file mode 100644
index 0fff4d0b1b..0000000000
--- a/target/linux/brcm63xx/patches-3.3/800-wl_exports.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/arch/mips/bcm63xx/nvram.c
-+++ b/arch/mips/bcm63xx/nvram.c
-@@ -19,6 +19,13 @@
- static struct bcm963xx_nvram nvram;
- static int mac_addr_used;
-
-+/*
-+ * Required export for WL
-+ */
-+#define NVRAM_SPACE 0x8000
-+char nvram_buf[NVRAM_SPACE];
-+EXPORT_SYMBOL(nvram_buf);
-+
- int __init bcm63xx_nvram_init(void *addr)
- {
- unsigned int check_len;
-@@ -27,6 +34,7 @@ int __init bcm63xx_nvram_init(void *addr
-
- /* extract nvram data */
- memcpy(&nvram, addr, sizeof(nvram));
-+ memcpy(&nvram_buf, addr, NVRAM_SPACE);
-
- /* check checksum before using data */
- if (nvram.version <= 4)
---- a/arch/mips/mm/cache.c
-+++ b/arch/mips/mm/cache.c
-@@ -58,6 +58,7 @@ void (*_dma_cache_wback)(unsigned long s
- void (*_dma_cache_inv)(unsigned long start, unsigned long size);
-
- EXPORT_SYMBOL(_dma_cache_wback_inv);
-+EXPORT_SYMBOL(_dma_cache_inv);
-
- #endif /* CONFIG_DMA_NONCOHERENT */
-
diff --git a/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch b/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
deleted file mode 100644
index c517fb46f2..0000000000
--- a/target/linux/brcm63xx/patches-3.3/801-ssb_export_fallback_sprom.patch
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
-+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -14,6 +14,7 @@
- #include <linux/ssb/ssb.h>
- #include <linux/gpio_keys.h>
- #include <linux/input.h>
-+#include <linux/export.h>
- #include <linux/spi/spi.h>
- #include <linux/spi/spi_gpio.h>
- #include <linux/spi/74x164.h>
-@@ -3368,7 +3369,7 @@ static const struct board_info __initdat
- * bcm4318 WLAN work
- */
- #ifdef CONFIG_SSB_PCIHOST
--static struct ssb_sprom bcm63xx_sprom = {
-+struct ssb_sprom bcm63xx_sprom = {
- .revision = 0x02,
- .board_rev = 0x17,
- .country_code = 0x0,
-@@ -3388,6 +3389,7 @@ static struct ssb_sprom bcm63xx_sprom =
- .boardflags_lo = 0x2848,
- .boardflags_hi = 0x0000,
- };
-+EXPORT_SYMBOL(bcm63xx_sprom);
-
- int bcm63xx_get_fallback_sprom(struct ssb_bus *bus, struct ssb_sprom *out)
- {
diff --git a/target/linux/brcm63xx/patches-3.3/802-rtl8367r_fix_RGMII_support.patch b/target/linux/brcm63xx/patches-3.3/802-rtl8367r_fix_RGMII_support.patch
deleted file mode 100644
index 285f3f744e..0000000000
--- a/target/linux/brcm63xx/patches-3.3/802-rtl8367r_fix_RGMII_support.patch
+++ /dev/null
@@ -1,30 +0,0 @@
-From e3208e6087642b95a5bab3101fc9c6e34892c861 Mon Sep 17 00:00:00 2001
-From: Miguel GAIO <miguel.gaio@efixo.com>
-Date: Fri, 6 Jul 2012 14:12:33 +0200
-Subject: [PATCH 6/8] * [rtl8367r] Fix RGMII support
-
----
- drivers/net/phy/rtl8367.c | 5 +++++
- 1 files changed, 5 insertions(+), 0 deletions(-)
-
---- a/drivers/net/phy/rtl8367.c
-+++ b/drivers/net/phy/rtl8367.c
-@@ -144,6 +144,10 @@
- #define RTL8367_EXT_RGMXF_TXDELAY_MASK 1
- #define RTL8367_EXT_RGMXF_RXDELAY_MASK 0x7
-
-+#define RTL8367_PHY_AD_REG 0x130f
-+#define RTL8370_PHY_AD_DUMMY_1_OFFSET 5
-+#define RTL8370_PHY_AD_DUMMY_1_MASK 0xe0
-+
- #define RTL8367_DI_FORCE_REG(_x) (0x1310 + (_x))
- #define RTL8367_DI_FORCE_MODE BIT(12)
- #define RTL8367_DI_FORCE_NWAY BIT(7)
-@@ -892,6 +896,7 @@ static int rtl8367_extif_set_mode(struct
- case RTL8367_EXTIF_MODE_RGMII_33V:
- REG_WR(smi, RTL8367_CHIP_DEBUG0_REG, 0x0367);
- REG_WR(smi, RTL8367_CHIP_DEBUG1_REG, 0x7777);
-+ REG_RMW(smi, RTL8367_PHY_AD_REG, BIT(5), 0);
- break;
-
- case RTL8367_EXTIF_MODE_TMII_MAC: