add ifxmips mei driver, untested and uncleaned

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@9898 3c298f89-4303-0410-b956-a3cf2f4a3e73

9 files changed, 6411 insertions, 1 deletions

diff --git a/target/linux/ifxmips/config-2.6.23 b/target/linux/ifxmips/config-2.6.23
index 52ce0c7905..f5ae09ceb1 100644
--- a/target/linux/ifxmips/config-2.6.23
+++ b/target/linux/ifxmips/config-2.6.23
@@ -62,7 +62,7 @@ CONFIG_IFXMIPS_EEPROM=y
 CONFIG_IFXMIPS_GPIO=y
 CONFIG_IFXMIPS_LED=y
 CONFIG_IFXMIPS_MEI=y
-# CONFIG_IFXMIPS_MII0 is not set
+CONFIG_IFXMIPS_MII0=y
 # CONFIG_IFXMIPS_MII1 is not set
 CONFIG_IFXMIPS_SSC=y
 CONFIG_IFXMIPS_WDT=y
diff --git a/target/linux/ifxmips/files/drivers/char/ifxmips_mei_core.c b/target/linux/ifxmips/files/drivers/char/ifxmips_mei_core.c
new file mode 100644
index 0000000000..4d14b8947b
--- /dev/null
+++ b/target/linux/ifxmips/files/drivers/char/ifxmips_mei_core.c
@@ -0,0 +1,3658 @@
+/******************************************************************************
+**
+** FILE NAME    : ifxmips_mei_core.c
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+   1.00.01             TC Chen     Fixed cell rate calculation issue
+   				   Fixed pvovider_id of adsl mib swapping issue
+   1.00.02             TC Chen     Added L3 Low Poewr Mode support.   
+   1.00.03             TC Chen     Fixed Clear Eoc transmit issue.
+   1.00.04  31/08/2006 TC Chen     Add ADSL Link/Data Led 
+				   Add Dual Latency Path
+                                   Add AUTOBOOT_ENABLE_SET ioctl for autoboot 
+				        mode enable/disable  
+                                   Fix fast path cell rate calculation
+   1.00.05  25/09/2006 TC Chen     Fix ATM QoS fail on interface 0(fast path).
+   1.00.06  02/10/2006 TC Chen     Change ifxmips_ppe_set_cell_rate to 
+					ifx_atm_set_cell_rate
+   				   Add ATM Led callback function
+   1.00.07  13/11/2006 TC Chen	   Invert ADSL Link LED Signal
+   1.00.08  08/12/2006 TC Chen	   Fix loop diagnostic warning message issue
+   1.00.09  20/12/2006 TC Chen	   Workaround for USB OC interrupt which is trigegred once DSL reset
+******************************************************************************/
+
+/*
+ * ===========================================================================
+ *                           INCLUDE FILES
+ * ===========================================================================
+ */
+
+#include <asm/ifxmips/ifxmips_mei_linux.h>
+
+char IFXMIPS_MEI_VERSION[] = "1.00.09";
+
+#define IFXMIPS_MEI_CMV_EXTRA	//WINHOST debug
+#define IFX_ADSL_L3_MODE_SUPPORT	//L3 Low Power Mode Support
+#define IFX_ADSL_DUAL_LATENCY_SUPPORT
+#undef IFXMIPS_CLEAR_EOC		//clear eoc support
+
+// for ARC memory access
+#define WHILE_DELAY 20000
+#if defined(IFXMIPS_PORT_RTEMS)
+#undef IFXMIPS_DMA_DEBUG_MUTEX
+#else
+#define IFXMIPS_DMA_DEBUG_MUTEX
+#endif
+
+#define IMAGE_SWAP
+#define BOOT_SWAP
+#define HEADER_SWAP
+
+//TODO
+#undef DFE_LOOPBACK		// testing code //undefined by Henry , start to real link test.
+		    //165203:henryhsu 
+
+#ifdef DFE_LOOPBACK
+//#define DFE_MEM_TEST
+//#define DFE_PING_TEST
+#define DFE_ATM_LOOPBACK
+#endif
+
+#undef DATA_LED_ON_MODE
+#define DATA_LED_SUPPORT	// support adsl data led
+//#define DATA_LED_ADSL_FW_HANDLE // adsl data led handle by firmware
+#define CONFIG_IFXMIPS_MEI_LED	// adsl led support
+
+//  Block size per BAR
+#define SDRAM_SEGMENT_SIZE	(64*1024)
+// Number of Bar registers
+#define MAX_BAR_REGISTERS	(17)
+
+#define XDATA_REGISTER		(15)
+
+#define IFXMIPS_MEI_DEVNAME "mei"
+
+#ifdef DFE_LOOPBACK
+#ifndef UINT32
+#define UINT32 unsigned long
+#endif
+#ifdef DFE_PING_TEST
+#include "dsp_xmem_arb_rand_em.h"
+#endif
+#ifdef DFE_MEM_TEST
+#include "aai_mem_test.h"
+#endif
+#ifdef DFE_ATM_LOOPBACK
+#include "aai_lpbk_dyn_rate.h"
+#endif
+#endif
+
+/************************************************************************
+ *  Function declaration
+ ************************************************************************/
+static MEI_ERROR meiDMAWrite (u32 destaddr, u32 * databuff, u32 databuffsize);
+static MEI_ERROR meiDMARead (u32 srcaddr, u32 * databuff, u32 databuffsize);
+static void meiControlModeSwitch (int mode);
+static void meiPollForDbgDone (void);
+static MEI_ERROR _meiDebugLongWordRead (u32 DEC_mode, u32 address,
+					u32 * data);
+static MEI_ERROR _meiDebugLongWordWrite (u32 DEC_mode, u32 address, u32 data);
+MEI_ERROR meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize);
+static MEI_ERROR meiDebugRead (u32 srcaddr, u32 * databuff, u32 databuffsize);
+static MEI_ERROR meiMailboxWrite (u16 * msgsrcbuffer, u16 msgsize);
+static MEI_ERROR meiDownloadBootCode (void);
+static MEI_ERROR meiHaltArc (void);
+static MEI_ERROR meiRunArc (void);
+static MEI_ERROR meiRunAdslModem (void);
+static int meiGetPage (u32 Page, u32 data, u32 MaxSize, u32 * Buffer,
+		       u32 * Dest);
+void makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size,
+	      u16 * data, u16 * CMVMSG);
+MEI_ERROR meiCMV (u16 * request, int reply, u16 * response);
+static void meiMailboxInterruptsDisable (void);
+static void meiMailboxInterruptsEnable (void);
+static int update_bar_register (int nTotalBar);
+static int free_image_buffer (int type);
+static int alloc_processor_memory (unsigned long size,
+				   smmu_mem_info_t * adsl_mem_info);
+ssize_t mei_write (MEI_file_t * filp, char *buf, size_t size, loff_t * loff);
+int mei_ioctl (MEI_inode_t * ino, MEI_file_t * fil, unsigned int command,
+	       unsigned long lon);
+
+#ifdef CONFIG_PROC_FS
+static int proc_read (struct file *file, char *buf, size_t nbytes,
+		      loff_t * ppos);
+static ssize_t proc_write (struct file *file, const char *buffer,
+			   size_t count, loff_t * ppos);
+#endif
+
+#ifdef CONFIG_IFXMIPS_MEI_MIB
+int mei_mib_ioctl (MEI_inode_t * ino, MEI_file_t * fil, unsigned int command,
+		   unsigned long lon);
+int mei_mib_adsl_link_up (void);
+int mei_mib_adsl_link_down (void);
+int ifxmips_mei_mib_init (void);
+int ifxmips_mei_mib_cleanup (void);
+#endif
+#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT)
+static int ifxmips_mei_led_init (void);
+static int ifxmips_mei_led_cleanup (void);
+static int adsl_led_flash_task (void);
+#endif
+// for clearEoC 
+#ifdef IFXMIPS_CLEAR_EOC
+extern void ifx_push_eoc (struct sk_buff *pkt);
+#endif
+
+/************************************************************************
+ *  variable declaration
+ ************************************************************************/
+static smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS];
+static unsigned long image_size = 0;
+static struct timeval time_disconnect, time_showtime;
+static u16 unavailable_seconds = 0;
+#ifdef IFXMIPS_CLEAR_EOC
+static wait_queue_head_t wait_queue_hdlc_poll;	///clear eoc
+#endif
+
+static int showtime_lock_flag = 0;
+static int quiet_mode_flag = 0;
+
+int showtime = 0;
+static int major = IFXMIPS_MEI_MAJOR;
+MEI_mutex_t mei_sema;
+
+// Mei to ARC CMV count, reply count, ARC Indicator count
+static int indicator_count = 0;
+static int cmv_count = 0;
+static int reply_count = 0;
+static u16 Recent_indicator[MSG_LENGTH];
+static int reset_arc_flag = 0;
+
+// Used in interrupt handler as flags
+static int arcmsgav = 0;
+static int cmv_reply = 0;
+static int cmv_waiting = 0;
+static int modem_ready = 0;
+//  to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
+static wait_queue_head_t wait_queue_arcmsgav;
+
+// CMV mailbox messages
+// ARC to MEI message
+static u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
+// MEI to ARC message
+static u16 CMV_TxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
+
+static u32 *mei_arc_swap_buff = NULL;	//  holding swap pages
+static ARC_IMG_HDR *img_hdr;
+static int arc_halt_flag = 0;
+static int nBar = 0;		// total bars to be used.
+
+static u32 loop_diagnostics_mode = 0;
+wait_queue_head_t wait_queue_loop_diagnostic;
+int loop_diagnostics_completed = 0;
+u32 adsl_mode, adsl_mode_extend;	// adsl mode : adsl/ 2/ 2+
+static int autoboot_enable_flag = 0;
+
+#ifdef IFX_ADSL_DUAL_LATENCY_SUPPORT
+static u8 bDualLatency = 0;
+#endif
+
+#ifdef IFXMIPS_CLEAR_EOC
+static u16 ceoc_read_idx = 0;
+#endif
+
+#ifdef IFX_ADSL_L3_MODE_SUPPORT
+static wait_queue_head_t wait_queue_l3;	// l3 power mode 
+static int l3_shutdown = 0;
+int get_l3_power_status (void);
+#endif
+
+#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT)
+int led_status_on = 0, led_need_to_flash = 0;
+static int stop_led_module = 0;	//wakeup and clean led module
+static wait_queue_head_t wait_queue_led_polling;	// adsl led
+#endif
+
+static struct file_operations mei_operations = {
+      write : mei_write,
+      ioctl : mei_ioctl,
+};
+
+#ifdef CONFIG_PROC_FS
+static struct proc_dir_entry *meidir;
+static struct file_operations proc_operations = {
+      read:proc_read,
+      write:proc_write,
+};
+static reg_entry_t regs[PROC_ITEMS];	//total items to be monitored by /proc/mei
+#define NUM_OF_REG_ENTRY	(sizeof(regs)/sizeof(reg_entry_t))
+#endif //#ifdef CONFIG_PROC_FS
+
+#ifdef DFE_LOOPBACK
+unsigned char got_int = 0;
+#endif
+
+/////////////////               mei access Rd/Wr methods       ///////////////
+/**
+ * Write a value to register 
+ * This function writes a value to ifxmips register
+ * 
+ * \param  	ul_address	The address to write
+ * \param  	ul_data		The value to write
+ * \ingroup	Internal
+ */
+static void
+meiLongwordWrite (u32* ul_address, u32 ul_data)
+{
+	writel(ul_data, ul_address);
+	wmb();
+	return;
+}				//    end of "meiLongwordWrite(..."
+
+/**
+ * Read the ifxmips register 
+ * This function read the value from ifxmips register
+ * 
+ * \param  	ul_address	The address to write
+ * \param  	pul_data	Pointer to the data
+ * \ingroup	Internal
+ */
+static void
+meiLongwordRead (u32* ul_address, u32 * pul_data)
+{
+	//*pul_data = *((volatile u32 *)ul_address);
+	*pul_data = readl(ul_address);
+	wmb();
+	return;
+}				//    end of "meiLongwordRead(..."
+
+/**
+ * Write several DWORD datas to ARC memory via ARC DMA interface
+ * This function writes several DWORD datas to ARC memory via DMA interface.
+ * 
+ * \param  	destaddr	The address to write
+ * \param  	databuff	Pointer to the data buffer
+ * \param  	databuffsize	Number of DWORDs to write
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+meiDMAWrite (u32 destaddr, u32 * databuff, u32 databuffsize)
+{
+	u32 *p = databuff;
+	u32 temp;
+	MEI_intstat_t flags;
+
+	if (destaddr & 3)
+		return MEI_FAILURE;
+
+#ifdef IFXMIPS_DMA_DEBUG_MUTEX
+	MEI_LOCKINT (flags);
+#endif
+
+	//printk("destaddr=%X,size=%d\n",destaddr,databuffsize);
+	//      Set the write transfer address
+	meiLongwordWrite (MEI_XFR_ADDR, destaddr);
+
+	//      Write the data pushed across DMA
+	while (databuffsize--) {
+		temp = *p;
+		if (databuff == (u32 *) CMV_TxMsg)
+			MEI_HALF_WORD_SWAP (temp);
+		meiLongwordWrite (MEI_DATA_XFR, temp);
+		p++;
+	}			//    end of "while(..."
+
+#ifdef IFXMIPS_DMA_DEBUG_MUTEX
+	MEI_UNLOCKINT (flags);
+#endif
+
+	return MEI_SUCCESS;
+
+}				//    end of "meiDMAWrite(..."
+
+/**
+ * Read several DWORD datas from ARC memory via ARC DMA interface
+ * This function reads several DWORD datas from ARC memory via DMA interface.
+ * 
+ * \param  	srcaddr		The address to read
+ * \param  	databuff	Pointer to the data buffer
+ * \param  	databuffsize	Number of DWORDs to read
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+meiDMARead (u32 srcaddr, u32 * databuff, u32 databuffsize)
+{
+	u32 *p = databuff;
+	u32 temp;
+#ifdef IFXMIPS_DMA_DEBUG_MUTEX
+	MEI_intstat_t flags;
+#endif
+	//printk("destaddr=%X,size=%X\n",srcaddr,databuffsize);
+	if (srcaddr & 3)
+		return MEI_FAILURE;
+
+#ifdef IFXMIPS_DMA_DEBUG_MUTEX
+	MEI_LOCKINT (flags);
+#endif
+
+	//      Set the read transfer address
+	meiLongwordWrite (MEI_XFR_ADDR, srcaddr);
+
+	//      Read the data popped across DMA
+	while (databuffsize--) {
+		meiLongwordRead (MEI_DATA_XFR, &temp);
+		if (databuff == (u32 *) CMV_RxMsg)	// swap half word
+			MEI_HALF_WORD_SWAP (temp);
+		*p = temp;
+		p++;
+	}			//    end of "while(..."
+
+#ifdef IFXMIPS_DMA_DEBUG_MUTEX
+	MEI_UNLOCKINT (flags);
+#endif
+
+	return MEI_SUCCESS;
+
+}				//    end of "meiDMARead(..."
+
+/**
+ * Switch the ARC control mode
+ * This function switchs the ARC control mode to JTAG mode or MEI mode
+ * 
+ * \param  	mode		The mode want to switch: JTAG_MASTER_MODE or MEI_MASTER_MODE.
+ * \ingroup	Internal
+ */
+static void
+meiControlModeSwitch (int mode)
+{
+	u32 temp = 0x0;
+	meiLongwordRead ( MEI_DBG_MASTER, &temp);
+	switch (mode) {
+	case JTAG_MASTER_MODE:
+		temp &= ~(HOST_MSTR);
+		break;
+	case MEI_MASTER_MODE:
+		temp |= (HOST_MSTR);
+		break;
+	default:
+		printk ("meiControlModeSwitch: unkonwn mode [%d]\n",
+				 mode);
+		return;
+	}
+	meiLongwordWrite (MEI_DBG_MASTER, temp);
+}
+
+/**
+ * Poll for transaction complete signal
+ * This function polls and waits for transaction complete signal.
+ * 
+ * \ingroup	Internal
+ */
+static void
+meiPollForDbgDone (void)
+{
+	u32 query = 0;
+	int i = 0;
+	while (i < WHILE_DELAY) {
+		meiLongwordRead (ARC_TO_MEI_INT, &query);
+		query &= (ARC_TO_MEI_DBG_DONE);
+		if (query)
+			break;
+		i++;
+		if (i == WHILE_DELAY) {
+			printk ("\n\n PollforDbg fail");
+		}
+	}
+	meiLongwordWrite ( ARC_TO_MEI_INT, ARC_TO_MEI_DBG_DONE);	// to clear this interrupt
+}				//    end of "meiPollForDbgDone(..."
+
+/**
+ * ARC Debug Memory Access for a single DWORD reading.
+ * This function used for direct, address-based access to ARC memory.
+ * 
+ * \param  	DEC_mode	ARC memory space to used
+ * \param  	address	  	Address to read
+ * \param  	data	  	Pointer to data
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+_meiDebugLongWordRead (u32 DEC_mode, u32 address, u32 * data)
+{
+	meiLongwordWrite ( MEI_DEBUG_DEC, DEC_mode);
+	meiLongwordWrite ( MEI_DEBUG_RAD, address);
+	meiPollForDbgDone ();
+	meiLongwordRead (MEI_DEBUG_DATA, data);
+	return MEI_SUCCESS;
+}
+
+/**
+ * ARC Debug Memory Access for a single DWORD writing.
+ * This function used for direct, address-based access to ARC memory.
+ * 
+ * \param  	DEC_mode	ARC memory space to used
+ * \param  	address	  	The address to write
+ * \param  	data	  	The data to write
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+_meiDebugLongWordWrite (u32 DEC_mode, u32 address, u32 data)
+{
+	meiLongwordWrite (MEI_DEBUG_DEC, DEC_mode);
+	meiLongwordWrite (MEI_DEBUG_WAD, address);
+	meiLongwordWrite (MEI_DEBUG_DATA, data);
+	meiPollForDbgDone ();
+	return MEI_SUCCESS;
+}
+
+/**
+ * ARC Debug Memory Access for writing.
+ * This function used for direct, address-based access to ARC memory.
+ * 
+ * \param  	destaddr	The address to ead
+ * \param  	databuffer  	Pointer to data
+ * \param	databuffsize	The number of DWORDs to read
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+
+MEI_ERROR
+meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize)
+{
+	u32 i;
+	u32 temp = 0x0;
+	u32 address = 0x0;
+	u32 *buffer = 0x0;
+#ifdef IFXMIPS_DMA_DEBUG_MUTEX
+	MEI_intstat_t flags;
+#endif
+
+#ifdef IFXMIPS_DMA_DEBUG_MUTEX
+	MEI_LOCKINT (flags);
+#endif
+
+	//      Open the debug port before DMP memory write
+	meiControlModeSwitch (MEI_MASTER_MODE);
+
+	meiLongwordWrite (MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
+
+	//      For the requested length, write the address and write the data
+	address = destaddr;
+	buffer = databuff;
+	for (i = 0; i < databuffsize; i++) {
+		temp = *buffer;
+		_meiDebugLongWordWrite (MEI_DEBUG_DEC_DMP1_MASK, address,
+					temp);
+		address += 4;
+		buffer++;
+	}			//    end of "for(..."
+
+	//      Close the debug port after DMP memory write
+	meiControlModeSwitch (JTAG_MASTER_MODE);
+
+#ifdef IFXMIPS_DMA_DEBUG_MUTEX
+	MEI_UNLOCKINT (flags);
+#endif
+
+	//      Return
+	return MEI_SUCCESS;
+
+}				//    end of "meiDebugWrite(..."
+
+/**
+ * ARC Debug Memory Access for reading.
+ * This function used for direct, address-based access to ARC memory.
+ * 
+ * \param  	srcaddr	  	The address to read
+ * \param  	databuffer  	Pointer to data
+ * \param	databuffsize	The number of DWORDs to read
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+meiDebugRead (u32 srcaddr, u32 * databuff, u32 databuffsize)
+{
+	u32 i;
+	u32 temp = 0x0;
+	u32 address = 0x0;
+	u32 *buffer = 0x0;
+#ifdef IFXMIPS_DMA_DEBUG_MUTEX
+	MEI_intstat_t flags;
+#endif
+
+#ifdef IFXMIPS_DMA_DEBUG_MUTEX
+	MEI_LOCKINT (flags);
+#endif
+
+	//      Open the debug port before DMP memory read
+	meiControlModeSwitch (MEI_MASTER_MODE);
+
+	meiLongwordWrite (MEI_DEBUG_DEC, MEI_DEBUG_DEC_DMP1_MASK);
+
+	//      For the requested length, write the address and read the data
+	address = srcaddr;
+	buffer = databuff;
+	for (i = 0; i < databuffsize; i++) {
+		_meiDebugLongWordRead (MEI_DEBUG_DEC_DMP1_MASK, address,
+				       &temp);
+		*buffer = temp;
+		address += 4;
+		buffer++;
+	}			//    end of "for(..."
+
+	//      Close the debug port after DMP memory read
+	meiControlModeSwitch (JTAG_MASTER_MODE);
+
+#ifdef IFXMIPS_DMA_DEBUG_MUTEX
+	MEI_UNLOCKINT (flags);
+#endif
+
+	//      Return
+	return MEI_SUCCESS;
+
+}				//    end of "meiDebugRead(..."
+
+/**
+ * Send a message to ARC MailBox.
+ * This function sends a message to ARC Mailbox via ARC DMA interface.
+ * 
+ * \param  	msgsrcbuffer  	Pointer to message.
+ * \param	msgsize		The number of words to write.
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+meiMailboxWrite (u16 * msgsrcbuffer, u16 msgsize)
+{
+	int i;
+	u32 arc_mailbox_status = 0x0;
+	u32 temp = 0;
+	MEI_ERROR meiMailboxError = MEI_SUCCESS;
+
+	//      Write to mailbox
+	meiMailboxError =
+		meiDMAWrite (MEI_TO_ARC_MAILBOX, (u32 *) msgsrcbuffer,
+			     msgsize / 2);
+	meiMailboxError =
+		meiDMAWrite (MEI_TO_ARC_MAILBOXR, (u32 *) (&temp), 1);
+
+	//      Notify arc that mailbox write completed
+	cmv_waiting = 1;
+	meiLongwordWrite (MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV);
+
+	i = 0;
+	while (i < WHILE_DELAY) {	// wait for ARC to clear the bit
+		meiLongwordRead ( MEI_TO_ARC_INT, &arc_mailbox_status);
+		if ((arc_mailbox_status & MEI_TO_ARC_MSGAV) !=
+		    MEI_TO_ARC_MSGAV)
+			break;
+		i++;
+		if (i == WHILE_DELAY) {
+			printk
+				("\n\n MEI_TO_ARC_MSGAV not cleared by ARC");
+			meiMailboxError = MEI_FAILURE;
+		}
+	}
+
+	//      Return
+	return meiMailboxError;
+
+}				//    end of "meiMailboxWrite(..."
+
+/**
+ * Read a message from ARC MailBox.
+ * This function reads a message from ARC Mailbox via ARC DMA interface.
+ * 
+ * \param  	msgsrcbuffer  	Pointer to message.
+ * \param	msgsize		The number of words to read
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+meiMailboxRead (u16 * msgdestbuffer, u16 msgsize)
+{
+	MEI_ERROR meiMailboxError = MEI_SUCCESS;
+	//      Read from mailbox
+	meiMailboxError =
+		meiDMARead (ARC_TO_MEI_MAILBOX, (u32 *) msgdestbuffer,
+			    msgsize / 2);
+
+	//      Notify arc that mailbox read completed
+	meiLongwordWrite (ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
+
+	//      Return
+	return meiMailboxError;
+
+}				//    end of "meiMailboxRead(..."
+
+/**
+ * Download boot pages to ARC.
+ * This function downloads boot pages to ARC.
+ * 
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+meiDownloadBootPages (void)
+{
+	int boot_loop;
+	int page_size;
+	u32 dest_addr;
+
+	/*
+	 **     DMA the boot code page(s)
+	 */
+#ifndef HEADER_SWAP
+	for (boot_loop = 1; boot_loop < le32_to_cpu (img_hdr->count);
+	     boot_loop++)
+#else
+	for (boot_loop = 1; boot_loop < (img_hdr->count); boot_loop++)
+#endif
+	{
+#ifndef HEADER_SWAP
+		if (le32_to_cpu (img_hdr->page[boot_loop].p_size) & BOOT_FLAG)
+#else
+		if ((img_hdr->page[boot_loop].p_size) & BOOT_FLAG)
+#endif
+		{
+			page_size =
+				meiGetPage (boot_loop, GET_PROG, MAXSWAPSIZE,
+					    mei_arc_swap_buff, &dest_addr);
+			if (page_size > 0) {
+				meiDMAWrite (dest_addr, mei_arc_swap_buff,
+					     page_size);
+			}
+		}
+#ifndef HEADER_SWAP
+		if (le32_to_cpu (img_hdr->page[boot_loop].d_size) & BOOT_FLAG)
+#else
+		if ((img_hdr->page[boot_loop].d_size) & BOOT_FLAG)
+#endif
+		{
+			page_size =
+				meiGetPage (boot_loop, GET_DATA, MAXSWAPSIZE,
+					    mei_arc_swap_buff, &dest_addr);
+			if (page_size > 0) {
+				meiDMAWrite (dest_addr, mei_arc_swap_buff,
+					     page_size);
+			}
+		}
+	}
+	return MEI_SUCCESS;
+}
+
+/**
+ * Initial efuse rar.
+ **/
+static void
+mei_fuse_rar_init (void)
+{
+	u32 data = 0;
+	meiDMAWrite (IRAM0_BASE, &data, 1);
+	meiDMAWrite (IRAM0_BASE + 4, &data, 1);
+	meiDMAWrite (IRAM1_BASE, &data, 1);
+	meiDMAWrite (IRAM1_BASE + 4, &data, 1);
+	meiDMAWrite (BRAM_BASE, &data, 1);
+	meiDMAWrite (BRAM_BASE + 4, &data, 1);
+	meiDMAWrite (ADSL_DILV_BASE, &data, 1);
+	meiDMAWrite (ADSL_DILV_BASE + 4, &data, 1);
+}
+
+/**
+ * efuse rar program
+ **/
+static void
+mei_fuse_prg (void)
+{
+	u32 reg_data, fuse_value;
+	int i = 0;
+	meiLongwordRead ( IFXMIPS_RCU_REQ, &reg_data);
+	while ((reg_data & 0x10000000) == 0) {
+		meiLongwordRead ( IFXMIPS_RCU_REQ, &reg_data);
+		//add a watchdog
+		i++;
+		/* 0x4000 translate to  about 16 ms@111M, so should be enough */
+		if (i == 0x4000)
+			return;
+	}
+	// STEP a: Prepare memory for external accesses
+	// Write fuse_en bit24
+	meiLongwordRead (IFXMIPS_RCU_REQ, &reg_data);
+	meiLongwordWrite (IFXMIPS_RCU_REQ, reg_data | (1 << 24));
+
+	mei_fuse_rar_init ();
+	for (i = 0; i < 4; i++) {
+		meiLongwordRead((u32*)(IFXMIPS_FUSE_BASE_ADDR + (i * 4)), &fuse_value);
+		switch (fuse_value & 0xF0000) {
+		case 0x80000:
+			reg_data =
+				((fuse_value & RX_DILV_ADDR_BIT_MASK) |
+				 (RX_DILV_ADDR_BIT_MASK + 0x1));
+			meiDMAWrite (ADSL_DILV_BASE, &reg_data, 1);
+			break;
+		case 0x90000:
+			reg_data =
+				((fuse_value & RX_DILV_ADDR_BIT_MASK) |
+				 (RX_DILV_ADDR_BIT_MASK + 0x1));
+			meiDMAWrite (ADSL_DILV_BASE + 4, &reg_data, 1);
+			break;
+		case 0xA0000:
+			reg_data =
+				((fuse_value & IRAM0_ADDR_BIT_MASK) |
+				 (IRAM0_ADDR_BIT_MASK + 0x1));
+			meiDMAWrite (IRAM0_BASE, &reg_data, 1);
+			break;
+		case 0xB0000:
+			reg_data =
+				((fuse_value & IRAM0_ADDR_BIT_MASK) |
+				 (IRAM0_ADDR_BIT_MASK + 0x1));
+			meiDMAWrite (IRAM0_BASE + 4, &reg_data, 1);
+			break;
+		case 0xC0000:
+			reg_data =
+				((fuse_value & IRAM1_ADDR_BIT_MASK) |
+				 (IRAM1_ADDR_BIT_MASK + 0x1));
+			meiDMAWrite (IRAM1_BASE, &reg_data, 1);
+			break;
+		case 0xD0000:
+			reg_data =
+				((fuse_value & IRAM1_ADDR_BIT_MASK) |
+				 (IRAM1_ADDR_BIT_MASK + 0x1));
+			meiDMAWrite (IRAM1_BASE + 4, &reg_data, 1);
+			break;
+		case 0xE0000:
+			reg_data =
+				((fuse_value & BRAM_ADDR_BIT_MASK) |
+				 (BRAM_ADDR_BIT_MASK + 0x1));
+			meiDMAWrite (BRAM_BASE, &reg_data, 1);
+			break;
+		case 0xF0000:
+			reg_data =
+				((fuse_value & BRAM_ADDR_BIT_MASK) |
+				 (BRAM_ADDR_BIT_MASK + 0x1));
+			meiDMAWrite (BRAM_BASE + 4, &reg_data, 1);
+			break;
+		default:	// PPE efuse
+			break;
+		}
+	}
+	meiLongwordRead (IFXMIPS_RCU_REQ, &reg_data);
+	meiLongwordWrite (IFXMIPS_RCU_REQ, reg_data & 0xF7FFFFFF);
+}
+
+/**
+ * Download boot code to ARC.
+ * This function downloads boot code to ARC.
+ * 
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+meiDownloadBootCode (void)
+{
+	u32 arc_debug_data = ACL_CLK_MODE_ENABLE;	//0x10
+
+	meiMailboxInterruptsDisable ();
+
+	//      Switch arc control from JTAG mode to MEI mode
+	meiControlModeSwitch (MEI_MASTER_MODE);
+	//enable ac_clk signal  
+	_meiDebugLongWordRead (MEI_DEBUG_DEC_DMP1_MASK, CRI_CCR0,
+			       &arc_debug_data);
+	arc_debug_data |= ACL_CLK_MODE_ENABLE;
+	_meiDebugLongWordWrite (MEI_DEBUG_DEC_DMP1_MASK, CRI_CCR0,
+				arc_debug_data);
+	//Switch arc control from MEI mode to JTAG mode
+	meiControlModeSwitch (JTAG_MASTER_MODE);
+
+	mei_fuse_prg ();	//program fuse rar
+
+	meiDownloadBootPages ();
+
+	return MEI_SUCCESS;
+
+}				//    end of "meiDownloadBootCode(..."
+
+//#endif
+
+/**
+ * Halt the ARC.
+ * This function halts the ARC.
+ * 
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+meiHaltArc (void)
+{
+	u32 arc_debug_data = 0x0;
+
+	//      Switch arc control from JTAG mode to MEI mode
+	meiControlModeSwitch (MEI_MASTER_MODE);
+	_meiDebugLongWordRead (MEI_DEBUG_DEC_AUX_MASK, ARC_DEBUG,
+			       &arc_debug_data);
+	arc_debug_data |= (BIT1);
+	_meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, ARC_DEBUG,
+				arc_debug_data);
+	//      Switch arc control from MEI mode to JTAG mode
+	meiControlModeSwitch (JTAG_MASTER_MODE);
+	arc_halt_flag = 1;
+
+	MEI_WAIT (10);
+	//      Return
+	return MEI_SUCCESS;
+
+}				//    end of "meiHalt(..."
+
+/**
+ * Run the ARC.
+ * This function runs the ARC.
+ * 
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+meiRunArc (void)
+{
+	u32 arc_debug_data = 0x0;
+
+	//      Switch arc control from JTAG mode to MEI mode- write '1' to bit0
+	meiControlModeSwitch (MEI_MASTER_MODE);
+	_meiDebugLongWordRead (MEI_DEBUG_DEC_AUX_MASK, AUX_STATUS,
+			       &arc_debug_data);
+
+	//      Write debug data reg with content ANDd with 0xFDFFFFFF (halt bit cleared)
+	arc_debug_data &= ~(BIT25);
+	_meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, AUX_STATUS,
+				arc_debug_data);
+
+	//      Switch arc control from MEI mode to JTAG mode- write '0' to bit0
+	meiControlModeSwitch (JTAG_MASTER_MODE);
+	//      Enable mask for arc codeswap interrupts
+	meiMailboxInterruptsEnable ();
+	arc_halt_flag = 0;
+
+	//      Return
+	return MEI_SUCCESS;
+
+}				//    end of "meiActivate(..."
+
+/**
+ * Reset the ARC.
+ * This function resets the ARC.
+ * 
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+meiResetARC (void)
+{
+
+	u32 arc_debug_data = 0;
+	showtime = 0;
+
+	meiHaltArc ();
+
+	meiLongwordRead (IFXMIPS_RCU_REQ, &arc_debug_data);
+	meiLongwordWrite (IFXMIPS_RCU_REQ,
+			  arc_debug_data | IFXMIPS_RCU_RST_REQ_DFE |
+			  IFXMIPS_RCU_RST_REQ_AFE);
+	meiLongwordWrite (IFXMIPS_RCU_REQ, arc_debug_data);
+	// reset ARC
+	meiLongwordWrite(MEI_RST_CONTROL, MEI_SOFT_RESET);
+	meiLongwordWrite(MEI_RST_CONTROL, 0);
+
+	meiMailboxInterruptsDisable ();
+	MEI_MUTEX_INIT (mei_sema, 1);
+	reset_arc_flag = 1;
+	modem_ready = 0;
+	return MEI_SUCCESS;
+}
+
+/**
+ * Reset the ARC, download boot codes, and run the ARC.
+ * This function resets the ARC, downloads boot codes to ARC, and runs the ARC.
+ * 
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+static MEI_ERROR
+meiRunAdslModem (void)
+{
+	int nSize = 0, idx = 0;
+
+	img_hdr = (ARC_IMG_HDR *) adsl_mem_info[0].address;
+#if	defined(HEADER_SWAP)
+	if ((img_hdr->count) * sizeof (ARC_SWP_PAGE_HDR) > SDRAM_SEGMENT_SIZE)
+#else //define(HEADER_SWAP)
+	if (le32_to_cpu (img_hdr->count) * sizeof (ARC_SWP_PAGE_HDR) >
+	    SDRAM_SEGMENT_SIZE)
+#endif //define(HEADER_SWAP)
+	{
+		printk
+			("segment_size is smaller than firmware header size\n");
+		return -1;
+	}
+	// check image size 
+	for (idx = 0; idx < MAX_BAR_REGISTERS; idx++) {
+		nSize += adsl_mem_info[idx].nCopy;
+	}
+	if (nSize != image_size) {
+		printk
+			("Firmware download is not completed. \nPlease download firmware again!\n");
+		return -1;
+	}
+	// TODO: check crc
+	///
+	if (reset_arc_flag == 0) {
+		u32 arc_debug_data;
+
+		meiResetARC ();
+		meiControlModeSwitch (MEI_MASTER_MODE);
+		//enable ac_clk signal  
+		_meiDebugLongWordRead (MEI_DEBUG_DEC_DMP1_MASK, CRI_CCR0,
+				       &arc_debug_data);
+		arc_debug_data |= ACL_CLK_MODE_ENABLE;
+		_meiDebugLongWordWrite (MEI_DEBUG_DEC_DMP1_MASK, CRI_CCR0,
+					arc_debug_data);
+		meiControlModeSwitch (JTAG_MASTER_MODE);
+		meiHaltArc ();
+		update_bar_register (nBar);
+	}
+	reset_arc_flag = 0;
+	if (arc_halt_flag == 0) {
+		meiHaltArc ();
+	}
+	printk ("Starting to meiDownloadBootCode\n");
+
+	meiDownloadBootCode();
+ 
+	// 1.00.09  20/12/2006 TC Chen
+	// disable USB OC interrupt, reset DSL chip will triger OC interrupt
+	disable_irq(IFXMIPS_USB_OC_INT);
+
+	meiRunArc ();
+
+	MEI_WAIT (100);		//wait 100ms 
+
+	//1.00.09  20/12/2006 TC Chen
+	// restore USB OC interrupt
+	MEI_MASK_AND_ACK_IRQ(IFXMIPS_USB_OC_INT);
+	enable_irq(IFXMIPS_USB_OC_INT);
+
+	if (modem_ready != 1) {
+		printk ("Running ADSL modem firmware fail!\n");
+		return MEI_FAILURE;
+	}
+
+
+	return MEI_SUCCESS;
+}
+
+/**
+ * Get the page's data pointer
+ * This function caculats the data address from the firmware header.
+ * 
+ * \param	Page		The page number.
+ * \param	data		Data page or program page.
+ * \param	MaxSize		The maximum size to read.
+ * \param	Buffer		Pointer to data.
+ * \param	Dest		Pointer to the destination address.
+ * \return	The number of bytes to read.
+ * \ingroup	Internal
+ */
+static int
+meiGetPage (u32 Page, u32 data, u32 MaxSize, u32 * Buffer, u32 * Dest)
+{
+	u32 size;
+	u32 i;
+	u32 *p;
+	u32 idx, offset, nBar = 0;
+
+	if (Page > img_hdr->count)
+		return -2;
+	/*
+	 **     Get program or data size, depending on "data" flag
+	 */
+#ifndef HEADER_SWAP
+	size = (data ==
+		GET_DATA) ? le32_to_cpu (img_hdr->page[Page].
+					 d_size) : le32_to_cpu (img_hdr->
+								page[Page].
+								p_size);
+#else
+	size = (data ==
+		GET_DATA) ? (img_hdr->page[Page].d_size) : (img_hdr->
+							    page[Page].
+							    p_size);
+#endif
+	size &= BOOT_FLAG_MASK;	//      Clear boot bit!
+	if (size > MaxSize)
+		return -1;
+
+	if (size == 0)
+		return 0;
+	/*
+	 **     Get program or data offset, depending on "data" flag
+	 */
+#ifndef HEADER_SWAP
+	i = data ? le32_to_cpu (img_hdr->page[Page].
+				d_offset) : le32_to_cpu (img_hdr->page[Page].
+							 p_offset);
+#else
+	i = data ? (img_hdr->page[Page].d_offset) : (img_hdr->page[Page].
+						     p_offset);
+#endif
+
+	/*
+	 **     Copy data/program to buffer
+	 */
+
+	idx = i / SDRAM_SEGMENT_SIZE;
+	offset = i % SDRAM_SEGMENT_SIZE;
+	p = (u32 *) ((u8 *) adsl_mem_info[idx].address + offset);
+
+	for (i = 0; i < size; i++) {
+		if (offset + i * 4 - (nBar * SDRAM_SEGMENT_SIZE) >=
+		    SDRAM_SEGMENT_SIZE) {
+			idx++;
+			nBar++;
+			p = (u32 *) ((u8 *)
+				     KSEG1ADDR ((u32) adsl_mem_info[idx].
+						address));
+		}
+		Buffer[i] = *p++;
+#ifdef BOOT_SWAP
+#ifndef IMAGE_SWAP
+		Buffer[i] = le32_to_cpu (Buffer[i]);
+#endif
+#endif
+	}
+
+	/*
+	 **     Pass back data/program destination address
+	 */
+#ifndef HEADER_SWAP
+	*Dest = data ? le32_to_cpu (img_hdr->page[Page].
+				    d_dest) : le32_to_cpu (img_hdr->
+							   page[Page].p_dest);
+#else
+	*Dest = data ? (img_hdr->page[Page].d_dest) : (img_hdr->page[Page].
+						       p_dest);
+#endif
+
+	return size;
+}
+
+////////////////makeCMV(Opcode, Group, Address, Index, Size, Data), CMV in u16 TxMessage[MSG_LENGTH]///////////////////////////
+
+/**
+ * Compose a message.
+ * This function compose a message from opcode, group, address, index, size, and data
+ * 
+ * \param	opcode		The message opcode
+ * \param	group		The message group number
+ * \param	address		The message address.
+ * \param	index		The message index.
+ * \param	size		The number of words to read/write.
+ * \param	data		The pointer to data.
+ * \param	CMVMSG		The pointer to message buffer.
+ * \ingroup	Internal
+ */
+void
+makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data,
+	 u16 * CMVMSG)
+{
+	memset (CMVMSG, 0, MSG_LENGTH * 2);
+	CMVMSG[0] = (opcode << 4) + (size & 0xf);
+	CMVMSG[1] = (((index == 0) ? 0 : 1) << 7) + (group & 0x7f);
+	CMVMSG[2] = address;
+	CMVMSG[3] = index;
+	if (opcode == H2D_CMV_WRITE)
+		memcpy (CMVMSG + 4, data, size * 2);
+	return;
+}
+
+/**
+ * Send a message to ARC and read the response
+ * This function sends a message to arc, waits the response, and reads the responses.
+ * 
+ * \param	request		Pointer to the request
+ * \param	reply		Wait reply or not.
+ * \param	response	Pointer to the response
+ * \return	MEI_SUCCESS or MEI_FAILURE
+ * \ingroup	Internal
+ */
+MEI_ERROR
+meiCMV (u16 * request, int reply, u16 * response)	// write cmv to arc, if reply needed, wait for reply
+{
+	MEI_ERROR meierror;
+#if defined(IFXMIPS_PORT_RTEMS)
+	int delay_counter = 0;
+#endif
+
+	cmv_reply = reply;
+	memcpy (CMV_TxMsg, request, MSG_LENGTH * 2);
+	arcmsgav = 0;
+
+	meierror = meiMailboxWrite (CMV_TxMsg, MSG_LENGTH);
+
+	if (meierror != MEI_SUCCESS) {
+		cmv_waiting = 0;
+		arcmsgav = 0;
+		printk ("\n\n MailboxWrite Fail.");
+		return meierror;
+	}
+	else {
+		cmv_count++;
+	}
+
+	if (cmv_reply == NO_REPLY)
+		return MEI_SUCCESS;
+
+#if !defined(IFXMIPS_PORT_RTEMS)
+	if (arcmsgav == 0)
+		MEI_WAIT_EVENT_TIMEOUT (wait_queue_arcmsgav, CMV_TIMEOUT);
+#else
+	while (arcmsgav == 0 && delay_counter < CMV_TIMEOUT / 5) {
+		MEI_WAIT (5);
+		delay_counter++;
+	}
+#endif
+
+	cmv_waiting = 0;
+	if (arcmsgav == 0) {	//CMV_timeout
+		arcmsgav = 0;
+		printk ("\nmeiCMV: MEI_MAILBOX_TIMEOUT\n");
+		return MEI_MAILBOX_TIMEOUT;
+	}
+	else {
+		arcmsgav = 0;
+		reply_count++;
+		memcpy (response, CMV_RxMsg, MSG_LENGTH * 2);
+		return MEI_SUCCESS;
+	}
+	return MEI_SUCCESS;
+}
+
+/////////////////////          Interrupt handler     /////////////////////////
+/**
+ * Disable ARC to MEI interrupt
+ * 
+ * \ingroup	Internal
+ */
+static void
+meiMailboxInterruptsDisable (void)
+{
+	meiLongwordWrite (ARC_TO_MEI_INT_MASK, 0x0);
+}				//    end of "meiMailboxInterruptsDisable(..."
+
+/**
+ * Eable ARC to MEI interrupt
+ * 
+ * \ingroup	Internal
+ */
+static void
+meiMailboxInterruptsEnable (void)
+{
+	meiLongwordWrite (ARC_TO_MEI_INT_MASK, MSGAV_EN);
+}				//    end of "meiMailboxInterruptsEnable(..."
+
+/**
+ * MEI interrupt handler
+ * 
+ * \param int1	
+ * \param void0
+ * \param regs	Pointer to the structure of ifxmips mips registers
+ * \ingroup	Internal
+ */
+irqreturn_t
+mei_interrupt_arcmsgav (int int1, void *void0)
+{
+	u32 scratch;
+
+#if defined(DFE_LOOPBACK) && defined(DFE_PING_TEST)
+	dfe_loopback_irq_handler ();
+	goto out;
+#endif //DFE_LOOPBACK
+
+	meiDebugRead (ARC_MEI_MAILBOXR, &scratch, 1);
+	if (scratch & OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK) {
+		printk("\n\n Receive Code Swap Request interrupt!!!");
+		goto out;
+	}
+	else if (scratch & OMB_CLEAREOC_INTERRUPT_CODE)	// clear eoc message interrupt
+	{
+		meiLongwordWrite (ARC_TO_MEI_INT, ARC_TO_MEI_MSGAV);
+#if defined (IFXMIPS_CLEAR_EOC)
+		MEI_WAKEUP_EVENT (wait_queue_hdlc_poll);
+#endif
+		MEI_MASK_AND_ACK_IRQ (IFXMIPS_MEI_INT);
+		goto out;
+	}
+	else {			// normal message
+		meiMailboxRead (CMV_RxMsg, MSG_LENGTH);
+#if 0
+		{
+			int msg_idx = 0;
+			printk ("got interrupt\n");
+			for (msg_idx = 0; msg_idx < MSG_LENGTH; msg_idx++) {
+				printk ("%04X ", CMV_RxMsg[msg_idx]);
+				if (msg_idx % 8 == 7)
+					printk ("\n");
+			}
+			printk ("\n");
+		}
+#endif
+		if (cmv_waiting == 1) {
+			arcmsgav = 1;
+			cmv_waiting = 0;
+#if !defined(IFXMIPS_PORT_RTEMS)
+			MEI_WAKEUP_EVENT (wait_queue_arcmsgav);
+#endif
+		}
+		else {
+			indicator_count++;
+			memcpy ((char *) Recent_indicator, (char *) CMV_RxMsg,
+				MSG_LENGTH * 2);
+			if (((CMV_RxMsg[0] & 0xff0) >> 4) == D2H_AUTONOMOUS_MODEM_READY_MSG)	// arc ready
+			{	//check ARC ready message
+				printk ("Got MODEM_READY_MSG\n");
+				modem_ready = 1;
+				MEI_MUTEX_UNLOCK (mei_sema);	// allow cmv access
+			}
+		}
+	}
+
+	MEI_MASK_AND_ACK_IRQ (IFXMIPS_MEI_INT);
+out:
+	return IRQ_HANDLED;;
+}
+
+////////////////////////hdlc ////////////////
+
+/**
+ * Get the hdlc status
+ * 
+ * \return	HDLC status
+ * \ingroup	Internal
+ */
+static unsigned int
+ifx_me_hdlc_status (void)
+{
+	u16 CMVMSG[MSG_LENGTH];
+	int ret;
+
+	if (showtime != 1)
+		return -ENETRESET;
+
+	makeCMV (H2D_CMV_READ, STAT, 14, 0, 1, NULL, CMVMSG);	//Get HDLC status 
+	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
+			 (unsigned long) CMVMSG);
+	if (ret != 0) {
+		return -EIO;
+	}
+	return CMVMSG[4] & 0x0F;
+}
+
+/**
+ * Check if the me is reslved.
+ * 
+ * \param	status		the me status
+ * \return	ME_HDLC_UNRESOLVED or ME_HDLC_RESOLVED
+ * \ingroup	Internal
+ */
+int
+ifx_me_is_resloved (int status)
+{
+	u16 CMVMSG[MSG_LENGTH];
+	int ret;
+	if (adsl_mode <= 8 && adsl_mode_extend == 0)	// adsl mode
+	{
+		makeCMV (H2D_CMV_READ, CNTL, 2, 0, 1, NULL, CMVMSG);	//Get ME-HDLC Control
+		ret = mei_ioctl ((struct inode *) 0, NULL,
+				 IFXMIPS_MEI_CMV_WINHOST,
+				 (unsigned long) CMVMSG);
+		if (ret != 0) {
+			return ME_HDLC_UNRESOLVED;
+		}
+		if (CMVMSG[4] & (1 << 0)) {
+			return ME_HDLC_UNRESOLVED;
+		}
+	}
+	else {
+		if (status == ME_HDLC_MSG_QUEUED
+		    || status == ME_HDLC_MSG_SENT)
+			return ME_HDLC_UNRESOLVED;
+		if (status == ME_HDLC_IDLE) {
+			makeCMV (H2D_CMV_READ, CNTL, 2, 0, 1, NULL, CMVMSG);	//Get ME-HDLC Control
+			ret = mei_ioctl ((struct inode *) 0, NULL,
+					 IFXMIPS_MEI_CMV_WINHOST,
+					 (unsigned long) CMVMSG);
+			if (ret != 0) {
+				return IFX_POP_EOC_FAIL;
+			}
+			if (CMVMSG[4] & (1 << 0)) {
+				return ME_HDLC_UNRESOLVED;
+			}
+		}
+	}
+	return ME_HDLC_RESOLVED;
+}
+
+int
+_ifx_me_hdlc_send (unsigned char *hdlc_pkt, int pkt_len, int max_length)
+{
+	int ret;
+	u16 CMVMSG[MSG_LENGTH];
+	u16 data = 0;
+	u16 len = 0;
+	int rx_length = 0;
+	int write_size = 0;
+
+	if (pkt_len > max_length) {
+		makeCMV (H2D_CMV_READ, INFO, 85, 2, 1, NULL, CMVMSG);	//Get ME-HDLC Control
+		ret = mei_ioctl ((struct inode *) 0, NULL,
+				 IFXMIPS_MEI_CMV_WINHOST,
+				 (unsigned long) CMVMSG);
+		if (ret != 0) {
+			return -EIO;
+		}
+		rx_length = CMVMSG[4];
+		if (rx_length + max_length < pkt_len) {
+			printk ("Exceed maximum eoc rx(%d)+tx(%d) message length\n", rx_length, max_length);
+			return -EMSGSIZE;
+		}
+		data = 1;
+		makeCMV (H2D_CMV_WRITE, INFO, 85, 6, 1, &data, CMVMSG);	//disable RX Eoc
+		ret = mei_ioctl ((struct inode *) 0, NULL,
+				 IFXMIPS_MEI_CMV_WINHOST,
+				 (unsigned long) CMVMSG);
+		if (ret != 0) {
+			return -EIO;
+		}
+	}
+	while (len < pkt_len) {
+		write_size = pkt_len - len;
+		if (write_size > 24)
+			write_size = 24;
+		//printk("len=%d,write_size=%d,pkt_len=%d\n",len,write_size,pkt_len);
+		memset (CMVMSG, 0, sizeof (CMVMSG));
+		makeCMV (H2D_CMV_WRITE, INFO, 81, len / 2, (write_size + 1) / 2, (u16 *) (hdlc_pkt + len), CMVMSG);	//Write clear eoc message to ARC
+		ret = mei_ioctl ((struct inode *) 0, NULL,
+				 IFXMIPS_MEI_CMV_WINHOST,
+				 (unsigned long) CMVMSG);
+		if (ret != 0) {
+			return -EIO;
+		}
+		len += write_size;
+	}
+	makeCMV (H2D_CMV_WRITE, INFO, 83, 2, 1, &len, CMVMSG);	//Update tx message length
+	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
+			 (unsigned long) CMVMSG);
+	if (ret != 0) {
+		return -EIO;
+	}
+
+	data = (1 << 0);
+	makeCMV (H2D_CMV_WRITE, CNTL, 2, 0, 1, &data, CMVMSG);	//Start to send
+	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
+			 (unsigned long) CMVMSG);
+	if (ret != 0) {
+		return -EIO;
+	}
+	return 0;
+}
+
+/**
+ * Send hdlc packets
+ * 
+ * \param	hdlc_pkt	Pointer to hdlc packet
+ * \param	hdlc_pkt_len	The number of bytes to send
+ * \return	success or failure.
+ * \ingroup	Internal
+ */
+int
+ifx_me_hdlc_send (unsigned char *hdlc_pkt, int hdlc_pkt_len)
+{
+	int hdlc_status = 0;
+	u16 CMVMSG[MSG_LENGTH];
+	int max_hdlc_tx_length = 0, ret = 0, retry = 0;
+	int power_mode = 0;
+	int send_busy_counter = 0;
+	int send_retry = 0;
+
+      HDLC_SEND:
+	// retry 1000 times (10 seconds)
+	while (retry < 1000) {
+		/* In L2 power mode, do not read the OHC related parameters, 
+		   instead give the indication to the calling IOCTL, 
+		   that the readout fails (just return -EBUSY).  */
+		power_mode = get_l3_power_status();
+		if (power_mode == L2_POWER_MODE) {
+			return -EBUSY;
+		}
+
+		hdlc_status = ifx_me_hdlc_status ();
+		if (ifx_me_is_resloved (hdlc_status) == ME_HDLC_RESOLVED)	// arc ready to send HDLC message
+		{
+			makeCMV (H2D_CMV_READ, INFO, 83, 0, 1, NULL, CMVMSG);	//Get Maximum Allowed HDLC Tx Message Length
+			ret = mei_ioctl ((struct inode *) 0, NULL,
+					 IFXMIPS_MEI_CMV_WINHOST,
+					 (unsigned long) CMVMSG);
+			if (ret != 0) {
+				printk
+					("ifx_me_hdlc_send failed. Return -EIO");
+				return -EIO;
+			}
+			max_hdlc_tx_length = CMVMSG[4];
+			ret = _ifx_me_hdlc_send (hdlc_pkt, hdlc_pkt_len,
+						 max_hdlc_tx_length);
+			return ret;
+		}
+		else {
+			if (hdlc_status == ME_HDLC_MSG_SENT)
+				send_busy_counter++;
+		}
+		retry++;
+		MEI_WAIT (1);
+	}
+	// wait 10 seconds and FW still report busy -> reset FW HDLC status
+	if (send_busy_counter > 950 && send_retry == 0) {
+		u16 data = 0;
+		send_retry = 1;
+		retry = 0;
+		printk ("Reset FW HDLC status!!\n");
+		send_busy_counter = 0;
+		data = (1 << 1);
+		makeCMV (H2D_CMV_WRITE, CNTL, 2, 0, 1, NULL, CMVMSG);	//Force reset to idle
+		ret = mei_ioctl ((struct inode *) 0, NULL,
+				 IFXMIPS_MEI_CMV_WINHOST,
+				 (unsigned long) CMVMSG);
+		if (ret != 0) {
+			return -EIO;
+		}
+		goto HDLC_SEND;
+	}
+	printk ("ifx_me_hdlc_send failed. Return -EBUSY");
+	return -EBUSY;
+}
+
+/**
+ * Read the hdlc packets
+ * 
+ * \param	hdlc_pkt	Pointer to hdlc packet
+ * \param	hdlc_pkt_len	The maximum number of bytes to read
+ * \return	The number of bytes which reads.
+ * \ingroup	Internal
+ */
+int
+ifx_mei_hdlc_read (char *hdlc_pkt, int max_hdlc_pkt_len)
+{
+	u16 CMVMSG[MSG_LENGTH];
+	int msg_read_len, ret = 0, pkt_len = 0, retry = 0;
+
+	while (retry < 10) {
+		ret = ifx_me_hdlc_status ();
+		if (ret == ME_HDLC_RESP_RCVD) {
+			int current_size = 0;
+			makeCMV (H2D_CMV_READ, INFO, 83, 3, 1, NULL, CMVMSG);	//Get EoC packet length
+			ret = mei_ioctl ((MEI_inode_t *) 0, NULL,
+					 IFXMIPS_MEI_CMV_WINHOST,
+					 (unsigned long) CMVMSG);
+			if (ret != 0) {
+				return -EIO;
+			}
+
+			pkt_len = CMVMSG[4];
+			if (pkt_len > max_hdlc_pkt_len) {
+				ret = -ENOMEM;
+				goto error;
+			}
+			while (current_size < pkt_len) {
+				if (pkt_len - current_size >
+				    (MSG_LENGTH * 2 - 8))
+					msg_read_len = (MSG_LENGTH * 2 - 8);
+				else
+					msg_read_len =
+						pkt_len - (current_size);
+				makeCMV (H2D_CMV_READ, INFO, 82, 0 + (current_size / 2), (msg_read_len + 1) / 2, NULL, CMVMSG);	//Get hdlc packet
+				ret = mei_ioctl ((MEI_inode_t *) 0, NULL,
+						 IFXMIPS_MEI_CMV_WINHOST,
+						 (unsigned long) CMVMSG);
+				if (ret != 0) {
+					goto error;
+				}
+				memcpy (hdlc_pkt + current_size, &CMVMSG[4],
+					msg_read_len);
+				current_size += msg_read_len;
+			}
+			ret = current_size;
+			break;
+		}
+		else {
+			ret = -ENODATA;
+		}
+
+		retry++;
+
+		MEI_WAIT (10);
+	}
+      error:
+	return ret;
+}
+
+#if defined(IFXMIPS_CLEAR_EOC)
+int
+ifx_me_ceoc_send (struct sk_buff *eoc_pkt)
+{
+	int ret, pkt_len = 0;
+	unsigned char *pkt_data_ptr;
+	int offset = 0;
+	int swap_idx = 0;
+
+	if (adsl_mode <= 8 && adsl_mode_extend == 0)	// adsl mode
+	{
+		pkt_len = eoc_pkt->len;
+
+		pkt_data_ptr = kmalloc (pkt_len + 3, GFP_KERNEL);
+
+		offset = 2;
+		pkt_data_ptr[0] = 0x4c;
+		pkt_data_ptr[1] = 0x81;
+		pkt_len += 2;
+	} else {
+		pkt_len = eoc_pkt->len + 4;
+		pkt_data_ptr = kmalloc (pkt_len + 1 + 2, GFP_KERNEL);
+		memset (pkt_data_ptr, 0, pkt_len + 1 + 2);
+		//fill clear eoc header
+		pkt_data_ptr[0] = 0x1;
+		pkt_data_ptr[1] = 0x8;
+		pkt_data_ptr[2] = 0x4c;
+		pkt_data_ptr[3] = 0x81;
+		offset = 4;
+	}
+	for (swap_idx = 0; swap_idx < (eoc_pkt->len / 2) * 2; swap_idx += 2)
+	{
+		//printk("%02X %02X ",eoc_pkt->data[swap_idx],eoc_pkt->data[swap_idx+1]);
+		pkt_data_ptr[swap_idx + offset] = eoc_pkt->data[swap_idx + 1];
+		pkt_data_ptr[swap_idx + 1 + offset] = eoc_pkt->data[swap_idx];
+	}
+	if (eoc_pkt->len % 2)
+	{
+		//printk("%02X ",eoc_pkt->data[eoc_pkt->len-1]);
+		pkt_data_ptr[eoc_pkt->len - 1 + offset] =
+			eoc_pkt->data[eoc_pkt->len - 1];
+		pkt_data_ptr[eoc_pkt->len + offset] =
+			eoc_pkt->data[eoc_pkt->len - 1];
+	}
+	ret = ifx_me_hdlc_send (pkt_data_ptr, pkt_len);
+
+	if (pkt_data_ptr != eoc_pkt->data)
+	{
+		kfree (pkt_data_ptr);
+	}
+	dev_kfree_skb (eoc_pkt);
+	return ret;
+}
+
+int
+get_me_ceoc_data (int pkt_len, int rx_buffer_addr, int rx_buffer_len,
+		  u8 * data_ptr1)
+{
+	int ret;
+	MEI_ERROR dma_ret;
+	u16 CMVMSG[MSG_LENGTH];
+	int read_size, aread_size;
+	int offset = 0;
+	u8 *data = NULL, *data_ptr = NULL;
+	int i, j;
+	int over_read = 0;
+
+	i = j = 0;
+
+	read_size = (pkt_len / 4) + 4;
+	offset = ceoc_read_idx % 4;
+	over_read = read_size * 4 - pkt_len - offset;
+
+	ceoc_read_idx = (ceoc_read_idx & 0xFFFFFFFC);
+
+	data = kmalloc (read_size * 4, GFP_KERNEL);
+	if (data == NULL)
+		goto error;
+	data_ptr = kmalloc (read_size * 4, GFP_KERNEL);
+	if (data_ptr == NULL)
+		goto error;
+	if (ceoc_read_idx + read_size * 4 >= rx_buffer_len) {
+		aread_size = (rx_buffer_len - ceoc_read_idx) / 4;
+	}
+	else {
+		aread_size = read_size;
+	}
+
+	//printk("aread_size = %d,ceoc_read_idx=%d,read_size=%d,offset=%d\n",aread_size,ceoc_read_idx,read_size,offset);
+	dma_ret =
+		meiDebugRead (rx_buffer_addr + ceoc_read_idx, (u32 *) (data),
+			      aread_size);
+	ceoc_read_idx += aread_size * 4;
+	if (aread_size != read_size) {
+		dma_ret =
+			meiDebugRead (rx_buffer_addr,
+				      (u32 *) (data) + aread_size,
+				      read_size - aread_size);
+		ceoc_read_idx = (read_size - aread_size) * 4;
+	}
+	if (ceoc_read_idx < over_read)
+		ceoc_read_idx = rx_buffer_len + ceoc_read_idx - over_read;
+	else
+		ceoc_read_idx -= over_read;
+
+	if (offset == 0 || offset == 2) {
+		for (i = 0; i < read_size; i++) {
+			// 3412 --> 1234
+
+			for (j = 0; j < 4; j++) {
+				if (i * 4 + j - offset >= 0)
+					data_ptr[i * 4 + j - offset] =
+						data[i * 4 + (3 - j)];
+			}
+		}
+
+	}
+	else if (offset == 1) {
+		for (i = 0; i < pkt_len; i = i + 4) {
+
+			data_ptr[i + 1] = data[i + 1];
+			data_ptr[i] = data[i + 2];
+			data_ptr[i + 3] = data[i + 7];
+			data_ptr[i + 2] = data[i];
+		}
+	}
+	else if (offset == 3) {
+		for (i = 0; i < pkt_len; i = i + 4) {
+			data_ptr[i + 1] = data[i + 7];
+			data_ptr[i + 0] = data[i];
+			data_ptr[i + 3] = data[i + 5];
+			data_ptr[i + 2] = data[i + 6];
+		}
+	}
+	if (pkt_len % 2 == 1)
+		data_ptr[pkt_len - 1] = data_ptr[pkt_len];
+
+	kfree (data);
+	memcpy (data_ptr1, data_ptr, pkt_len);
+	kfree (data_ptr);
+
+	makeCMV (H2D_CMV_WRITE, INFO, 85, 3, 1, &ceoc_read_idx, CMVMSG);
+	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
+			 (unsigned long) CMVMSG);
+	if (ret != 0) {
+		goto error;
+	}
+
+	return dma_ret;
+      error:
+	kfree (data);
+	kfree (data_ptr);
+	return -1;
+}
+
+int
+ifx_me_ceoc_receive (int ceoc_write_idx, int rx_buffer_len,
+		     struct sk_buff **eoc_pkt)
+{
+	u16 CMVMSG[MSG_LENGTH];
+	int pkt_len, ret;
+	u16 lsw_addr, msw_addr;
+	u32 rx_buffer_addr = 0;
+	MEI_ERROR dma_ret;
+
+	//printk("rx_buffer_len=%d,ceoc_read_idx=%d,ceoc_write_idx=%d\n",rx_buffer_len,ceoc_read_idx,ceoc_write_idx);
+	if (ceoc_write_idx > ceoc_read_idx) {
+		pkt_len = ceoc_write_idx - ceoc_read_idx;
+	}
+	else {
+		pkt_len = rx_buffer_len - ceoc_read_idx + ceoc_write_idx;
+	}
+	*eoc_pkt = dev_alloc_skb (pkt_len);
+	if (*eoc_pkt == NULL) {
+		printk ("Out of memory!\n");
+		ret = -ENOMEM;
+		goto error;
+	}
+
+	makeCMV (H2D_CMV_READ, INFO, 85, 0, 1, NULL, CMVMSG);	//Get HDLC packet 
+	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
+			 (unsigned long) CMVMSG);
+	if (ret != 0) {
+		goto error;
+	}
+	lsw_addr = CMVMSG[4];
+
+	makeCMV (H2D_CMV_READ, INFO, 85, 1, 1, NULL, CMVMSG);	//Get HDLC packet 
+	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
+			 (unsigned long) CMVMSG);
+	if (ret != 0) {
+		goto error;
+	}
+	msw_addr = CMVMSG[4];
+	rx_buffer_addr = msw_addr << 16 | lsw_addr;
+	dma_ret =
+		get_me_ceoc_data (pkt_len, rx_buffer_addr, rx_buffer_len,
+				  (u16 *) skb_put (*eoc_pkt, pkt_len));
+	if (dma_ret != MEI_SUCCESS) {
+		ret = -EIO;
+		goto error;
+	}
+
+	return 0;
+      error:
+	if (*eoc_pkt != NULL)
+		dev_kfree_skb (*eoc_pkt);
+	return ret;
+}
+
+int
+ifx_mei_ceoc_rx (void)
+{
+	u16 CMVMSG[MSG_LENGTH];
+	int rx_buffer_len, ret, pkt_len = 0;
+	struct sk_buff *eoc_pkt;
+	u16 ceoc_write_idx = 0;
+
+	makeCMV (H2D_CMV_READ, INFO, 85, 2, 1, NULL, CMVMSG);	//Get EoC packet length
+	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
+			 (unsigned long) CMVMSG);
+	if (ret != 0) {
+		printk ("ioctl fail!!\n");
+	}
+	rx_buffer_len = CMVMSG[4];
+
+	makeCMV (H2D_CMV_READ, INFO, 85, 4, 1, NULL, CMVMSG);	//Get write index
+	ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST,
+			 (unsigned long) CMVMSG);
+	if (ret != 0) {
+		return -EIO;
+	}
+
+	ceoc_write_idx = CMVMSG[4];
+	ret = ifx_me_ceoc_receive (ceoc_write_idx, rx_buffer_len, &eoc_pkt);
+#if defined (CONFIG_ATM_IFXMIPS)
+	if (ret == 0) {
+		skb_pull (eoc_pkt, 2);	// skip 4c 81 header
+		ifx_push_ceoc (eoc_pkt);	//pass data to higher layer
+	}
+
+	return ret;
+#endif
+}
+
+static int
+adsl_clear_eoc_poll (void *unused)
+{
+	struct task_struct *tsk = current;
+
+	daemonize("mei_eoc_poll");
+	strcpy(tsk->comm, "mei_ceoc_poll");
+	sigfillset(&tsk->blocked);
+
+	while (1)
+	{
+		MEI_WAIT_EVENT (wait_queue_hdlc_poll);
+		if (showtime)
+			ifx_mei_ceoc_rx();
+		}
+	return 0;
+}
+#endif //#if defined(IFXMIPS_CLEAR_EOC)
+
+#ifdef IFXMIPS_CLEAR_EOC
+static int
+ifxmips_mei_ceoc_init (void)
+{
+	kernel_thread (adsl_clear_eoc_poll, NULL,
+		       CLONE_FS | CLONE_FILES | CLONE_SIGNAL);
+	return 0;
+}
+#endif
+
+//////////////////////  Driver Structure        ///////////////////////
+
+/**
+ * Free the memory for ARC firmware
+ * 
+ * \param	type	Free all memory or free the unused memory after showtime
+ * \ingroup	Internal
+ */
+static int
+free_image_buffer (int type)
+{
+	int idx = 0;
+	for (idx = 0; idx < MAX_BAR_REGISTERS; idx++) {
+		printk ("meminfo[%d].type=%d,size=%ld,addr=%X\n", idx,
+				 adsl_mem_info[idx].type, adsl_mem_info[idx].size,
+				 (unsigned int)adsl_mem_info[idx].address);
+		if (type == FREE_ALL || adsl_mem_info[idx].type == type) {
+			if (adsl_mem_info[idx].size > 0) {
+				kfree (adsl_mem_info[idx].org_address);
+				adsl_mem_info[idx].address = 0;
+				adsl_mem_info[idx].size = 0;
+				adsl_mem_info[idx].type = 0;
+				adsl_mem_info[idx].nCopy = 0;
+			}
+		}
+	}
+	return 0;
+}
+
+/**
+ * Allocate memory for ARC firmware
+ * 
+ * \param	size		The number of bytes to allocate.
+ * \param	adsl_mem_info	Pointer to firmware information.
+ * \ingroup	Internal
+ */
+static int
+alloc_processor_memory (unsigned long size, smmu_mem_info_t * adsl_mem_info)
+{
+	char *mem_ptr = NULL;
+	char *org_mem_ptr = NULL;
+	int idx = 0;
+	long total_size = 0;
+	long img_size = size;
+	int err = 0;
+
+	// Alloc Swap Pages
+	while (img_size > 0 && idx < MAX_BAR_REGISTERS) {
+		// skip bar15 for XDATA usage.
+#ifndef DFE_LOOPBACK
+		if (idx == XDATA_REGISTER)
+			idx++;
+#endif
+		if (idx == MAX_BAR_REGISTERS - 1)
+		{
+			//allocate 1MB memory for bar16
+			org_mem_ptr = kmalloc (1024 * 1024, GFP_ATOMIC);
+			mem_ptr = (char*)((unsigned long) (org_mem_ptr +  1023) & 0xFFFFFC00);
+			adsl_mem_info[idx].size = 1024 * 1024;
+		} else {
+			org_mem_ptr = kmalloc (SDRAM_SEGMENT_SIZE, GFP_ATOMIC);
+			mem_ptr = (char*)((unsigned long) (org_mem_ptr + 1023) & 0xFFFFFC00);
+			adsl_mem_info[idx].size = SDRAM_SEGMENT_SIZE;
+		}
+		if (org_mem_ptr == NULL)
+		{
+			printk ("kmalloc memory fail!\n");
+			err = -ENOMEM;
+			goto allocate_error;
+		}
+		adsl_mem_info[idx].address = mem_ptr;
+		adsl_mem_info[idx].org_address = org_mem_ptr;
+
+		img_size -= SDRAM_SEGMENT_SIZE;
+		total_size += SDRAM_SEGMENT_SIZE;
+		printk("alloc memory idx=%d,img_size=%ld,addr=%X\n",
+				idx, img_size, (unsigned int)adsl_mem_info[idx].address);
+		idx++;
+	}
+	if (img_size > 0)
+	{
+		printk ("Image size is too large!\n");
+		err = -EFBIG;
+		goto allocate_error;
+	}
+	err = idx;
+	return err;
+
+      allocate_error:
+	free_image_buffer (FREE_ALL);
+	return err;
+}
+
+/**
+ * Program the BAR registers
+ * 
+ * \param	nTotalBar	The number of bar to program.
+ * \ingroup	Internal
+ */
+static int
+update_bar_register (int nTotalBar)
+{
+	int idx = 0;
+
+	for (idx = 0; idx < nTotalBar; idx++) {
+		//skip XDATA register
+		if (idx == XDATA_REGISTER)
+			idx++;
+		meiLongwordWrite ( MEI_XMEM_BAR_BASE + idx * 4,
+				  (((uint32_t) adsl_mem_info[idx].
+				    address) & 0x0FFFFFFF));
+		printk ("BAR%d=%08X, addr=%08X\n", idx,
+				 (((uint32_t) adsl_mem_info[idx].
+				   address) & 0x0FFFFFFF),
+				 (((uint32_t) adsl_mem_info[idx].address)));
+	}
+	for (idx = nTotalBar; idx < MAX_BAR_REGISTERS; idx++) {
+		if (idx == XDATA_REGISTER)
+			idx++;
+		meiLongwordWrite ( MEI_XMEM_BAR_BASE + idx * 4,
+				  (((uint32_t) adsl_mem_info[nTotalBar - 1].
+				    address) & 0x0FFFFFFF));
+	}
+
+	meiLongwordWrite (MEI_XMEM_BAR_BASE + XDATA_REGISTER * 4,
+			  (((uint32_t) adsl_mem_info[XDATA_REGISTER].
+			    address) & 0x0FFFFFFF));
+	// update MEI_XDATA_BASE_SH
+	printk ("update bar15 register with %08lX\n",
+			 ((unsigned long) adsl_mem_info[XDATA_REGISTER].
+			  address) & 0x0FFFFFFF);
+	meiLongwordWrite (MEI_XDATA_BASE_SH,
+			  ((unsigned long) adsl_mem_info[XDATA_REGISTER].
+			   address) & 0x0FFFFFFF);
+	return MEI_SUCCESS;
+}
+
+/**
+ * Copy the firmware to BARs memory.
+ * 
+ * \param	filp		Pointer to the file structure.
+ * \param	buf		Pointer to the data.
+ * \param	size		The number of bytes to copy.
+ * \param	loff		The file offset.
+ * \return	The current file position.
+ * \ingroup	Internal
+ */
+ssize_t
+mei_write (MEI_file_t * filp, char *buf, size_t size, loff_t * loff)
+{
+	ARC_IMG_HDR img_hdr_tmp, *img_hdr;
+
+	size_t nRead = 0, nCopy = 0;
+	char *mem_ptr;
+	ssize_t retval = -ENOMEM;
+	int idx = 0;
+
+	if (*loff == 0) {
+		if (size < sizeof (img_hdr)) {
+			printk ("Firmware size is too small!\n");
+			return retval;
+		}
+		copy_from_user ((char *) &img_hdr_tmp, buf,
+				sizeof (img_hdr_tmp));
+		image_size = le32_to_cpu (img_hdr_tmp.size) + 8;	// header of image_size and crc are not included.
+		if (image_size > 1024 * 1024) {
+			printk ("Firmware size is too large!\n");
+			return retval;
+		}
+		// check if arc is halt
+		if (arc_halt_flag != 1) {
+			meiResetARC ();
+			meiHaltArc ();
+		}
+
+		// reset part of PPE 
+		*(unsigned long *) (IFXMIPS_PPE32_SRST) = 0xC30;
+		*(unsigned long *) (IFXMIPS_PPE32_SRST) = 0xFFF;
+
+		free_image_buffer (FREE_ALL);	//free all
+
+		retval = alloc_processor_memory (image_size, adsl_mem_info);
+		if (retval < 0) {
+			printk ("Error: No memory space left.\n");
+			goto error;
+		}
+
+		for (idx = 0; idx < retval; idx++) {
+			//skip XDATA register
+			if (idx == XDATA_REGISTER)
+				idx++;
+			if (idx * SDRAM_SEGMENT_SIZE <
+			    le32_to_cpu (img_hdr_tmp.page[0].p_offset)) {
+				adsl_mem_info[idx].type = FREE_RELOAD;
+			}
+			else {
+				adsl_mem_info[idx].type = FREE_SHOWTIME;
+			}
+
+		}
+		nBar = retval;
+
+		img_hdr = (ARC_IMG_HDR *) adsl_mem_info[0].address;
+
+#if !defined(__LINUX__)
+		adsl_mem_info[XDATA_REGISTER].org_address =
+			kmalloc (SDRAM_SEGMENT_SIZE + 1023, GFP_ATOMIC);
+#else
+		adsl_mem_info[XDATA_REGISTER].org_address =
+			kmalloc (SDRAM_SEGMENT_SIZE, GFP_ATOMIC);
+#endif
+		adsl_mem_info[XDATA_REGISTER].address =
+			(char
+			 *) ((unsigned long) (adsl_mem_info[XDATA_REGISTER].
+					      org_address +
+					      1023) & 0xFFFFFC00);
+		adsl_mem_info[XDATA_REGISTER].size = SDRAM_SEGMENT_SIZE;
+		if (adsl_mem_info[XDATA_REGISTER].address == NULL) {
+			printk ("kmalloc memory fail!\n");
+			retval = -ENOMEM;
+			goto error;
+		}
+		adsl_mem_info[XDATA_REGISTER].type = FREE_RELOAD;
+		update_bar_register (nBar);
+
+	}
+	else if (image_size == 0) {
+		printk ("Error: Firmware size=0! \n");
+		goto error;
+	}
+	else {
+		if (arc_halt_flag == 0) {
+			printk
+				("Please download the firmware from the beginning of the firmware!\n");
+			goto error;
+		}
+	}
+
+	nRead = 0;
+	while (nRead < size) {
+		long offset = ((long) (*loff) + nRead) % SDRAM_SEGMENT_SIZE;
+		idx = (((long) (*loff)) + nRead) / SDRAM_SEGMENT_SIZE;
+		mem_ptr = (char *)
+			KSEG1ADDR ((unsigned long) (adsl_mem_info[idx].
+						    address) + offset);
+		if ((size - nRead + offset) > SDRAM_SEGMENT_SIZE)
+			nCopy = SDRAM_SEGMENT_SIZE - offset;
+		else
+			nCopy = size - nRead;
+		copy_from_user (mem_ptr, buf + nRead, nCopy);
+#ifdef IMAGE_SWAP
+		for (offset = 0; offset < (nCopy / 4); offset++) {
+			((unsigned long *) mem_ptr)[offset] =
+				le32_to_cpu (((unsigned long *)
+					      mem_ptr)[offset]);
+		}
+#endif //IMAGE_SWAP
+		nRead += nCopy;
+		adsl_mem_info[idx].nCopy += nCopy;
+	}
+
+#if	( defined(HEADER_SWAP) && !defined(IMAGE_SWAP)) || (defined(IMAGE_SWAP) && !defined(HEADER_SWAP))
+	if (*loff == 0) {
+
+		for (idx = 0;
+		     idx <
+		     (sizeof (ARC_IMG_HDR) +
+		      (le32_to_cpu (img_hdr_tmp.count) -
+		       1) * sizeof (ARC_SWP_PAGE_HDR)) / 4; idx++) {
+			((unsigned long *) img_hdr)[idx] =
+				le32_to_cpu (((unsigned long *)
+					      img_hdr)[idx]);
+		}
+	}
+#endif //( defined(HEADER_SWAP) && !defined(IMAGE_SWAP)) || (defined(IMAGE_SWAP) && !defined(HEADER_SWAP))
+	printk ("size=%X,loff=%08X\n", size, (unsigned int) *loff);
+
+	*loff += size;
+	return size;
+      error:
+	free_image_buffer (FREE_ALL);
+
+	return retval;
+}
+
+/********************************************************
+ * L3 Power Mode                                        *
+ ********************************************************/
+/**
+ * Send a CMV message.
+ * This function sends a CMV message to ARC
+ * 
+ * \param	opcode		The message opcode
+ * \param	group		The message group number
+ * \param	address		The message address.
+ * \param	index		The message index.
+ * \param	size		The number of words to read/write.
+ * \param	data		The pointer to data.
+ * \param	CMVMSG		The pointer to message buffer.
+ * \return	0: success 
+ * \ingroup	Internal
+ */
+int
+send_cmv (u8 opcode, u8 group, u16 address, u16 index, int size, u16 * data, u16 * CMVMSG)
+{
+	int ret;
+
+	makeCMV(opcode, group, address, index, size, data, CMVMSG);
+	ret = mei_ioctl((struct inode *) 0, NULL, IFXMIPS_MEI_CMV_WINHOST, (unsigned long)CMVMSG);
+	return ret;
+}
+
+#ifdef IFX_ADSL_L3_MODE_SUPPORT
+
+/**
+ * Check the L3 request from CO
+ * This function Check if CPE received the L3 request from CO
+ * \return	1: got L3 request.  
+ * \ingroup	Internal
+ */
+int
+check_co_l3_shutdown_request (void)
+{
+	u16 CMVMSG[MSG_LENGTH];
+	if (modem_ready == 1) {
+		if (send_cmv (H2D_CMV_READ, STAT, 4, 0, 1, NULL, CMVMSG) != 0) {
+			return -EBUSY;
+		}
+		if (CMVMSG[4] & BIT14) {
+			return 1;
+		}
+	}
+	return 0;
+}
+
+/**
+ * Check the L3 status
+ * This function get the CPE Power Management Mode status
+ * \return	0: L0 Mode
+ *		2: L2 Mode
+ *		3: L3 Mode
+ * \ingroup	Internal
+ */
+int
+get_l3_power_status (void)
+{
+	u16 CMVMSG[MSG_LENGTH];
+	if (modem_ready == 0) {
+		return L3_POWER_MODE;
+	}
+	else {
+		if (send_cmv (H2D_CMV_READ, STAT, 18, 0, 1, NULL, CMVMSG) !=
+		    0) {
+			return -EBUSY;
+		}
+		return ((int) CMVMSG[4]);
+
+	}
+	return 0;
+}
+
+/**
+ * Send a L3 request to CO
+ * This function send a L3 request to CO and check the CO response.
+ * \return	0: Success. Others: Fail.
+ * \ingroup	Internal
+ */
+int
+send_l3_shutdown_cmd (void)
+{
+	u16 cmd = 0x1;
+	int nRetry = 0;
+	u16 CMVMSG[MSG_LENGTH];
+
+	if (modem_ready == 0) {
+		return -EBUSY;
+	}
+	// send l3 request to CO
+	if (send_cmv (H2D_CMV_WRITE, CNTL, 3, 0, 1, &cmd, CMVMSG) != 0) {
+		return -EBUSY;
+	}
+      retry:
+	MEI_WAIT (10);
+
+	// check CO response
+	if (send_cmv (H2D_CMV_READ, STAT, 20, 0, 1, NULL, CMVMSG) != 0) {
+		return -EBUSY;
+	}
+	if (CMVMSG[4] == 0) {
+		nRetry++;
+		if (nRetry < 10) {
+			goto retry;
+		}
+		else {
+			return -EBUSY;
+		}
+
+	}
+	else if (CMVMSG[4] == 1)	// reject
+	{
+		return -EPERM;
+	}
+	else if (CMVMSG[4] == 2)	// ok
+	{
+		return 0;
+	}
+	else if (CMVMSG[4] == 3)	// failure
+	{
+		return -EAGAIN;
+	}
+	return 0;
+}
+
+/**
+ * Enable L3 Power Mode
+ * This function send a L3 request to CO and check the CO response. Then reboot the CPE to enter L3 Mode.
+ * \return	0: Success. Others: Fail.
+ * \ingroup	Internal
+ */
+int
+set_l3_shutdown (void)
+{
+	int ret = 0;
+	if (l3_shutdown == 0) {
+		// send l3 request to CO
+		ret = send_l3_shutdown_cmd ();
+		if (ret == 0)	//got CO ACK
+		{
+			//reboot adsl and block autoboot daemon
+			ret = mei_ioctl ((struct inode *) 0, NULL, IFXMIPS_MEI_REBOOT, (unsigned long)NULL);
+			l3_shutdown = 1;
+		}
+	}
+	return ret;
+}
+
+/**
+ * Disable L3 Power Mode
+ * This function disable L3 Mode and wake up the autoboot daemon.
+ * \return	0: Success.
+ * \ingroup	Internal
+ */
+//l3 power mode disable
+int
+set_l3_power_on (void)
+{
+	if (l3_shutdown == 1) {
+		l3_shutdown = 0;
+		// wakeup autoboot daemon
+		MEI_WAKEUP_EVENT (wait_queue_l3);
+
+	}
+	return 0;
+}
+
+/********************************************************
+ * End of L3 Power Mode                                 *
+ ********************************************************/
+#endif //IFX_ADSL_L3_MODE_SUPPORT
+
+#ifdef CONFIG_IFXMIPS_MEI_LED
+/*
+ *  LED Initialization function
+ */
+int
+meiADSLLedInit (void)
+{
+	u16 data = 0x0600;
+	u16 CMVMSG[MSG_LENGTH];
+
+	data = 0x0400;
+#if defined(DATA_LED_SUPPORT) && defined (DATA_LED_ADSL_FW_HANDLE)
+	data |= 0x200;
+#endif
+	// Setup ADSL Link/Data LED
+	if (send_cmv (H2D_CMV_WRITE, INFO, 91, 0, 1, &data, CMVMSG) != 0) {
+		return -EBUSY;
+	}
+
+	if (send_cmv (H2D_CMV_WRITE, INFO, 91, 2, 1, &data, CMVMSG) != 0) {
+		return -EBUSY;
+	}
+
+	// Let FW to handle ADSL Link LED
+	data = 0x0a03;		//invert the LED signal as per input from Stefan on 13/11/2006
+	if (send_cmv (H2D_CMV_WRITE, INFO, 91, 4, 1, &data, CMVMSG) != 0) {
+		return -EBUSY;
+	}
+
+#ifdef DATA_LED_SUPPORT
+#ifdef DATA_LED_ADSL_FW_HANDLE
+
+	// Turn ADSL Data LED on
+	data = 0x0900;
+	if (send_cmv (H2D_CMV_WRITE, INFO, 91, 5, 1, &data, CMVMSG) != 0) {
+		return -EBUSY;
+	}
+#else
+	ifxmips_led_set(0x1);
+#endif
+#endif
+	return 0;
+}
+#endif
+
+#ifdef IFX_ADSL_DUAL_LATENCY_SUPPORT
+/* 
+ * Dual Latency Path Initialization function
+ */
+int
+meiDualLatencyInit (void)
+{
+	u16 nDual = 0;
+	u16 CMVMSG[MSG_LENGTH];
+
+	// setup up stream path 
+	if (bDualLatency & DUAL_LATENCY_US_ENABLE) {
+		nDual = 2;
+	}
+	else {
+		nDual = 1;
+	}
+
+	if (send_cmv (H2D_CMV_WRITE, CNFG, 10, 0, 1, &nDual, CMVMSG) != 0) {
+		return -EBUSY;
+	}
+
+	if (send_cmv (H2D_CMV_WRITE, CNFG, 11, 0, 1, &nDual, CMVMSG) != 0) {
+		return -EBUSY;
+	}
+
+	// setup down stream path       
+	if (bDualLatency & DUAL_LATENCY_DS_ENABLE) {
+		nDual = 2;
+	}
+	else {
+		nDual = 1;
+	}
+
+	if (send_cmv (H2D_CMV_WRITE, CNFG, 21, 0, 1, &nDual, CMVMSG) != 0) {
+		return -EBUSY;
+	}
+	if (send_cmv (H2D_CMV_WRITE, CNFG, 22, 0, 1, &nDual, CMVMSG) != 0) {
+		return -EBUSY;
+	}
+	return 0;
+}
+
+int
+mei_is_dual_latency_enabled (void)
+{
+	return bDualLatency;
+}
+#endif
+
+int
+meiAdslStartupInit (void)
+{
+#ifdef CONFIG_IFXMIPS_MEI_LED
+	meiADSLLedInit ();
+#endif
+#ifdef IFX_ADSL_DUAL_LATENCY_SUPPORT
+	meiDualLatencyInit ();
+#endif
+	return 0;
+}
+
+/**
+ * MEI IO controls for user space accessing
+ * 
+ * \param	ino		Pointer to the stucture of inode.
+ * \param	fil		Pointer to the stucture of file.
+ * \param	command		The ioctl command.
+ * \param	lon		The address of data.
+ * \return	Success or failure.
+ * \ingroup	Internal
+ */
+int
+mei_ioctl (MEI_inode_t * ino, MEI_file_t * fil, unsigned int command,
+	   unsigned long lon)
+{
+	int i;
+
+	int meierr = MEI_SUCCESS;
+	meireg regrdwr;
+	meidebug debugrdwr;
+	u32 arc_debug_data, reg_data;
+#ifdef IFXMIPS_CLEAR_EOC
+	u16 data;
+	struct sk_buff *eoc_skb;
+#endif //IFXMIPS_CLEAR_EOC
+	u16 RxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
+	u16 TxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
+
+	int from_kernel = 0;	//joelin
+	if (ino == (MEI_inode_t *) 0)
+		from_kernel = 1;	//joelin
+	if (command < IFXMIPS_MEI_START) {
+#ifdef CONFIG_IFXMIPS_MEI_MIB
+		return mei_mib_ioctl (ino, fil, command, lon);
+#endif //CONFIG_IFXMIPS_MEI_MIB
+
+		if (command == IFXMIPS_MIB_LO_ATUR
+		    || command == IFXMIPS_MIB_LO_ATUC)
+			return MEI_SUCCESS;
+		printk
+			("No such ioctl command (0x%X)! MEI ADSL MIB is not supported!\n",
+			 command);
+		return -ENOIOCTLCMD;
+	}
+	else {
+		switch (command) {
+		case IFXMIPS_MEI_START:
+
+			showtime = 0;
+			loop_diagnostics_completed = 0;
+			if (time_disconnect.tv_sec == 0)
+				do_gettimeofday (&time_disconnect);
+
+			if (MEI_MUTEX_LOCK (mei_sema))	//disable CMV access until ARC ready
+			{
+				printk ("-ERESTARTSYS\n");
+				return -ERESTARTSYS;
+			}
+
+			meiMailboxInterruptsDisable ();	//disable all MEI interrupts
+			if (mei_arc_swap_buff == NULL) {
+				mei_arc_swap_buff =
+					(u32 *) kmalloc (MAXSWAPSIZE * 4,
+							 GFP_KERNEL);
+				if (mei_arc_swap_buff == NULL) {
+					printk
+						("\n\n malloc fail for codeswap buff");
+					meierr = MEI_FAILURE;
+				}
+			}
+			if (meiRunAdslModem () != MEI_SUCCESS) {
+				printk
+					("meiRunAdslModem()  error...");
+				meierr = MEI_FAILURE;
+			}
+#ifdef IFX_ADSL_L3_MODE_SUPPORT
+			/* L3 Power Mode Start */
+			if (l3_shutdown == 1) {
+				// block autoboot daemon until l3 power mode disable
+				MEI_WAIT_EVENT (wait_queue_l3);
+			}
+			/* L3 Power Mode End */
+#endif //IFX_ADSL_L3_MODE_SUPPORT
+			if (autoboot_enable_flag)
+				meiAdslStartupInit ();
+			break;
+
+		case IFXMIPS_MEI_SHOWTIME:
+			if (MEI_MUTEX_LOCK (mei_sema))
+				return -ERESTARTSYS;
+
+			do_gettimeofday (&time_showtime);
+			unavailable_seconds +=
+				time_showtime.tv_sec - time_disconnect.tv_sec;
+			time_disconnect.tv_sec = 0;
+			makeCMV (H2D_CMV_READ, RATE, 0, 0, 4, NULL, TxMessage);	//maximum allowed tx message length, in bytes
+			if (meiCMV (TxMessage, YES_REPLY, RxMessage) !=
+			    MEI_SUCCESS) {
+				printk
+					("\n\nCMV fail, Group RAGE Address 0 Index 0");
+			}
+			else {
+				u32 rate_fast;
+				u32 rate_intl;
+				rate_intl = RxMessage[4] | RxMessage[5] << 16;
+				rate_fast = RxMessage[6] | RxMessage[7] << 16;
+				// 609251:tc.chen Fix ATM QoS issue start
+				if (rate_intl && rate_fast)	// apply cell rate to each path
+				{
+#ifdef CONFIG_ATM_IFXMIPS
+					ifx_atm_set_cell_rate (1,
+							       rate_intl /
+							       (53 * 8));
+					ifx_atm_set_cell_rate (0,
+							       rate_fast /
+							       (53 * 8));
+#endif
+				}
+				else if (rate_fast)	// apply fast path cell rate to atm interface 0
+				{
+#ifdef CONFIG_ATM_IFXMIPS
+					ifx_atm_set_cell_rate (0,
+							       rate_fast /
+							       (53 * 8));
+#endif
+				}
+				else if (rate_intl)	// apply interleave path cell rate to atm interface 0
+				{
+#ifdef CONFIG_ATM_IFXMIPS
+					ifx_atm_set_cell_rate (0,
+							       rate_intl /
+							       (53 * 8));
+#endif
+				}
+				else {
+					printk ("Got rate fail.\n");
+				}
+				// 609251:tc.chen end 
+			}
+
+#ifdef IFXMIPS_CLEAR_EOC
+			data = 1;
+			makeCMV (H2D_CMV_WRITE, OPTN, 24, 0, 1, &data,
+				 TxMessage);
+			if (meiCMV (TxMessage, YES_REPLY, RxMessage) !=
+			    MEI_SUCCESS) {
+				printk ("Enable clear eoc fail!\n");
+			}
+#endif
+			// read adsl mode
+			makeCMV (H2D_CMV_READ, STAT, 1, 0, 1, NULL,
+				 TxMessage);
+			if (meiCMV (TxMessage, YES_REPLY, RxMessage) !=
+			    MEI_SUCCESS) {
+#ifdef IFXMIPS_MEI_DEBUG_ON
+				printk ("\n\nCMV fail, Group STAT Address 1 Index 0");
+#endif
+			}
+			adsl_mode = RxMessage[4];
+			makeCMV (H2D_CMV_READ, STAT, 17, 0, 1, NULL,
+				 TxMessage);
+			if (meiCMV (TxMessage, YES_REPLY, RxMessage) !=
+			    MEI_SUCCESS) {
+#ifdef IFXMIPS_MEI_DEBUG_ON
+				printk ("\n\nCMV fail, Group STAT Address 1 Index 0");
+#endif
+			}
+			adsl_mode_extend = RxMessage[4];
+#ifdef CONFIG_IFXMIPS_MEI_MIB
+			mei_mib_adsl_link_up ();
+#endif
+
+//joelin 04/16/2005-start
+			makeCMV (H2D_CMV_WRITE, PLAM, 10, 0, 1,
+				 &unavailable_seconds, TxMessage);
+			if (meiCMV (TxMessage, YES_REPLY, RxMessage) !=
+			    MEI_SUCCESS) {
+				printk
+					("\n\nCMV fail, Group 7 Address 10 Index 0");
+			}
+
+//joelin 04/16/2005-end         
+			showtime = 1;
+			free_image_buffer (FREE_SHOWTIME);
+			MEI_MUTEX_UNLOCK (mei_sema);
+			break;
+
+		case IFXMIPS_MEI_HALT:
+			if (arc_halt_flag == 0) {
+				meiResetARC ();
+				meiHaltArc ();
+			}
+			break;
+		case IFXMIPS_MEI_RUN:
+			if (arc_halt_flag == 1) {
+				meiRunArc ();
+			}
+			break;
+		case IFXMIPS_MEI_CMV_WINHOST:
+			if (MEI_MUTEX_LOCK (mei_sema))
+				return -ERESTARTSYS;
+
+			if (!from_kernel)
+				copy_from_user ((char *) TxMessage, (char *) lon, MSG_LENGTH * 2);	//joelin
+			else
+				memcpy (TxMessage, (char *) lon,
+					MSG_LENGTH * 2);
+
+			if (meiCMV (TxMessage, YES_REPLY, RxMessage) !=
+			    MEI_SUCCESS) {
+				printk
+					("\n\nWINHOST CMV fail :TxMessage:%X %X %X %X, RxMessage:%X %X %X %X %X\n",
+					 TxMessage[0], TxMessage[1],
+					 TxMessage[2], TxMessage[3],
+					 RxMessage[0], RxMessage[1],
+					 RxMessage[2], RxMessage[3],
+					 RxMessage[4]);
+				meierr = MEI_FAILURE;
+			}
+			else {
+				if (!from_kernel)	//joelin
+					copy_to_user ((char *) lon,
+						      (char *) RxMessage,
+						      MSG_LENGTH * 2);
+				else
+					memcpy ((char *) lon,
+						(char *) RxMessage,
+						MSG_LENGTH * 2);
+			}
+
+			MEI_MUTEX_UNLOCK (mei_sema);
+			break;
+#ifdef IFXMIPS_MEI_CMV_EXTRA
+		case IFXMIPS_MEI_CMV_READ:
+			copy_from_user ((char *) (&regrdwr), (char *) lon,
+					sizeof (meireg));
+			meiLongwordRead ((u32*)regrdwr.iAddress, &(regrdwr.iData));
+
+			copy_to_user((char *) lon, (char *) (&regrdwr), sizeof (meireg));
+			break;
+
+		case IFXMIPS_MEI_CMV_WRITE:
+			copy_from_user ((char *) (&regrdwr), (char *) lon, sizeof (meireg));
+			meiLongwordWrite ((u32*)regrdwr.iAddress, regrdwr.iData);
+			break;
+
+		case IFXMIPS_MEI_REMOTE:
+			copy_from_user ((char *) (&i), (char *) lon,
+					sizeof (int));
+			if (i == 0) {
+				meiMailboxInterruptsEnable ();
+
+				MEI_MUTEX_UNLOCK (mei_sema);
+			}
+			else if (i == 1) {
+				meiMailboxInterruptsDisable ();
+				if (MEI_MUTEX_LOCK (mei_sema))
+					return -ERESTARTSYS;
+			}
+			else {
+				printk
+					("\n\n IFXMIPS_MEI_REMOTE argument error");
+				meierr = MEI_FAILURE;
+			}
+			break;
+
+		case IFXMIPS_MEI_READDEBUG:
+		case IFXMIPS_MEI_WRITEDEBUG:
+#if 0				//tc.chen:It is no necessary to acquire lock to read debug memory!!
+			if (MEI_MUTEX_LOCK (mei_sema))
+				return -ERESTARTSYS;
+#endif
+			if (!from_kernel)
+				copy_from_user ((char *) (&debugrdwr),
+						(char *) lon,
+						sizeof (debugrdwr));
+			else
+				memcpy ((char *) (&debugrdwr), (char *) lon,
+					sizeof (debugrdwr));
+
+			if (command == IFXMIPS_MEI_READDEBUG)
+				meiDebugRead (debugrdwr.iAddress,
+					      debugrdwr.buffer,
+					      debugrdwr.iCount);
+			else
+				meiDebugWrite (debugrdwr.iAddress,
+					       debugrdwr.buffer,
+					       debugrdwr.iCount);
+
+			if (!from_kernel)
+				copy_to_user ((char *) lon, (char *) (&debugrdwr), sizeof (debugrdwr));	//dying gasp
+#if 0				//tc.chen:It is no necessary to acquire lock to read debug memory!!
+			MEI_MUTEX_UNLOCK (mei_sema);
+#endif
+			break;
+		case IFXMIPS_MEI_RESET:
+		case IFXMIPS_MEI_REBOOT:
+
+#ifdef CONFIG_IFXMIPS_MEI_MIB
+			mei_mib_adsl_link_down ();
+#endif
+
+#ifdef IFX_ADSL_L3_MODE_SUPPORT
+			/* L3 Power Mode start */
+			if (check_co_l3_shutdown_request () == 1)	//co request
+			{
+				// cpe received co L3 request
+				l3_shutdown = 1;
+			}
+			/* L3 Power Mode end */
+#endif //IFX_ADSL_L3_MODE_SUPPORT
+
+			meiResetARC ();
+			meiControlModeSwitch (MEI_MASTER_MODE);
+			//enable ac_clk signal  
+			_meiDebugLongWordRead (MEI_DEBUG_DEC_DMP1_MASK,
+					       CRI_CCR0, &arc_debug_data);
+			arc_debug_data |= ACL_CLK_MODE_ENABLE;
+			_meiDebugLongWordWrite (MEI_DEBUG_DEC_DMP1_MASK,
+						CRI_CCR0, arc_debug_data);
+			meiControlModeSwitch (JTAG_MASTER_MODE);
+			meiHaltArc ();
+			update_bar_register (nBar);
+			break;
+		case IFXMIPS_MEI_DOWNLOAD:
+			// DMA the boot code page(s)
+			printk ("Start download pages");
+			meiDownloadBootPages ();
+			break;
+#endif //IFXMIPS_MEI_CMV_EXTRA
+			//for clearEoC
+#ifdef IFXMIPS_CLEAR_EOC
+		case IFXMIPS_MEI_EOC_SEND:
+			if (!showtime) {
+				return -EIO;
+			}
+			if (!from_kernel) {
+				copy_from_user ((char *) (&debugrdwr),
+						(char *) lon,
+						sizeof (debugrdwr));
+				eoc_skb =
+					dev_alloc_skb (debugrdwr.iCount * 4);
+				if (eoc_skb == NULL) {
+					printk
+						("\n\nskb alloc fail");
+					break;
+				}
+
+				eoc_skb->len = debugrdwr.iCount * 4;
+				memcpy (skb_put
+					(eoc_skb, debugrdwr.iCount * 4),
+					(char *) debugrdwr.buffer,
+					debugrdwr.iCount * 4);
+			}
+			else {
+				eoc_skb = (struct sk_buff *) lon;
+			}
+			ifx_me_ceoc_send (eoc_skb);	//pass data to higher layer
+			break;
+#endif // IFXMIPS_CLEAR_EOC
+		case IFXMIPS_MEI_JTAG_ENABLE:
+			printk ("ARC JTAG Enable.\n");
+			*(IFXMIPS_GPIO_P0_DIR) = (*IFXMIPS_GPIO_P0_DIR) & (~0x800);	// set gpio11 to input
+			*(IFXMIPS_GPIO_P0_ALTSEL0) = ((*IFXMIPS_GPIO_P0_ALTSEL0) & (~0x800));
+			*(IFXMIPS_GPIO_P0_ALTSEL1) = ((*IFXMIPS_GPIO_P0_ALTSEL1) & (~0x800));
+			*IFXMIPS_GPIO_P0_OD = (*IFXMIPS_GPIO_P0_OD) | 0x800;
+
+			//enable ARC JTAG
+			meiLongwordRead(IFXMIPS_RCU_REQ, &reg_data);
+			meiLongwordWrite(IFXMIPS_RCU_REQ, reg_data | IFXMIPS_RCU_RST_REQ_ARC_JTAG);
+			break;
+
+		case GET_ADSL_LOOP_DIAGNOSTICS_MODE:
+			copy_to_user ((char *) lon, (char *) &loop_diagnostics_mode, sizeof(int));
+			break;
+		case LOOP_DIAGNOSTIC_MODE_COMPLETE:
+			loop_diagnostics_completed = 1;
+#ifdef CONFIG_IFXMIPS_MEI_MIB
+			// read adsl mode
+			makeCMV (H2D_CMV_READ, STAT, 1, 0, 1, NULL, TxMessage);
+			if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) {
+#ifdef IFXMIPS_MEI_DEBUG_ON
+				printk ("\n\nCMV fail, Group STAT Address 1 Index 0");
+#endif
+			}
+			adsl_mode = RxMessage[4];
+
+			makeCMV (H2D_CMV_READ, STAT, 17, 0, 1, NULL, TxMessage);
+			if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) {
+#ifdef IFXMIPS_MEI_DEBUG_ON
+				printk ("\n\nCMV fail, Group STAT Address 1 Index 0");
+#endif
+			}
+			adsl_mode_extend = RxMessage[4];
+#endif
+			MEI_WAKEUP_EVENT (wait_queue_loop_diagnostic);
+			break;
+		case SET_ADSL_LOOP_DIAGNOSTICS_MODE:
+			if (lon != loop_diagnostics_mode) {
+				loop_diagnostics_completed = 0;
+				loop_diagnostics_mode = lon;
+#if 0 //08/12/2006 tc.chen : autoboot daemon should reset dsl
+				mei_ioctl ((MEI_inode_t *) 0, NULL,
+					   IFXMIPS_MEI_REBOOT,
+					   (unsigned long) NULL);
+#endif
+			}
+			break;
+		case IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE:
+			copy_to_user ((char *) lon,
+				      (char *) &loop_diagnostics_completed,
+				      sizeof (int));
+			break;
+#ifdef IFX_ADSL_L3_MODE_SUPPORT
+			/* L3 Power Mode Start */
+		case GET_POWER_MANAGEMENT_MODE:
+			i = get_l3_power_status ();
+			copy_to_user ((char *) lon, (char *) &i,
+				      sizeof (int));
+			break;
+		case SET_L3_POWER_MODE:
+			i = 1;
+			copy_from_user ((char *) &i, (char *) lon,
+					sizeof (int));
+			if (i == 0) {
+				return set_l3_shutdown ();
+			}
+			else {
+				return set_l3_power_on ();
+			}
+			break;
+			/* L3 Power Mode End */
+#endif //IFX_ADSL_L3_MODE_SUPPORT
+#ifdef IFX_ADSL_DUAL_LATENCY_SUPPORT
+		case GET_ADSL_DUAL_LATENCY:
+			i = mei_is_dual_latency_enabled ();
+			if (i < 0)
+				return i;
+			copy_to_user ((char *) lon, (char *) &i,
+				      sizeof (int));
+			break;
+		case SET_ADSL_DUAL_LATENCY:
+			i = 0;
+			copy_from_user ((char *) &i, (char *) lon,
+					sizeof (int));
+			if (i > DUAL_LATENCY_US_DS_ENABLE) {
+				return -EINVAL;
+			}
+			if (i != bDualLatency) {
+				bDualLatency = i;
+				i = 1;	// DualLatency update,need to reboot arc
+			}
+			else {
+				i = 0;	// DualLatency is the same
+			}
+			if (modem_ready && i)	// modem is already start, reboot arc to apply Dual Latency changed
+			{
+				mei_ioctl ((MEI_inode_t *) 0, NULL,
+					   IFXMIPS_MEI_REBOOT,
+					   (unsigned long) NULL);
+			}
+			break;
+
+#endif
+		case QUIET_MODE_GET:
+			copy_to_user ((char *) lon, (char *) &quiet_mode_flag,
+				      sizeof (int));
+			break;
+		case QUIET_MODE_SET:
+			copy_from_user ((char *) &i, (char *) lon,
+					sizeof (int));
+			if (i > 1 || i < 0)
+				return -EINVAL;
+			if (i == 1) {
+				u16 CMVMSG[MSG_LENGTH];
+				u16 data = 0;
+				makeCMV (H2D_CMV_WRITE, INFO, 94, 0, 1, &data, CMVMSG);	// set tx power to 0
+				meierr = mei_ioctl ((struct inode *) 0, NULL,
+						    IFXMIPS_MEI_CMV_WINHOST,
+						    (unsigned long) CMVMSG);
+			}
+			quiet_mode_flag = i;
+			break;
+		case SHOWTIME_LOCK_GET:
+			copy_to_user ((char *) lon,
+				      (char *) &showtime_lock_flag,
+				      sizeof (int));
+			break;
+		case SHOWTIME_LOCK_SET:
+			copy_from_user ((char *) &i, (char *) lon,
+					sizeof (int));
+			if (i > 1 || i < 0)
+				return -EINVAL;
+			showtime_lock_flag = i;
+			break;
+		case AUTOBOOT_ENABLE_SET:
+			copy_from_user ((char *) &i, (char *) lon,
+					sizeof (int));
+			if (i > 1 || i < 0)
+				return -EINVAL;
+			autoboot_enable_flag = i;
+			break;
+		default:
+			printk
+				("The ioctl command(0x%X is not supported!\n",
+				 command);
+			meierr = -ENOIOCTLCMD;
+		}
+	}
+	return meierr;
+}				//mei_ioctl
+
+////////////////////     procfs debug    ///////////////////////////
+
+#ifdef CONFIG_PROC_FS
+static int
+proc_read (struct file *file, char *buf, size_t nbytes, loff_t * ppos)
+{
+	int i_ino = (file->f_dentry->d_inode)->i_ino;
+	char outputbuf[64];
+	int count = 0;
+	int i;
+	u32 version = 0;
+	reg_entry_t *current_reg = NULL;
+	u16 RxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
+	u16 TxMessage[MSG_LENGTH] __attribute__ ((aligned (4)));
+
+	for (i = 0; i < NUM_OF_REG_ENTRY; i++) {
+		if (regs[i].low_ino == i_ino) {
+			current_reg = &regs[i];
+			break;
+		}
+	}
+	if (current_reg == NULL)
+		return -EINVAL;
+
+	if (current_reg->flag == (int *) 8) {
+		///proc/mei/version
+		//format:
+		//Firmware version: major.minor.sub_version.int_version.rel_state.spl_appl
+		///Firmware Date Time Code: date/month min:hour
+		if (*ppos > 0)	/* Assume reading completed in previous read */
+			return 0;	// indicates end of file
+		if (MEI_MUTEX_LOCK (mei_sema))
+			return -ERESTARTSYS;
+
+		if (indicator_count < 1) {
+			MEI_MUTEX_UNLOCK (mei_sema);
+			return -EAGAIN;
+		}
+		//major:bits 0-7 
+		//minor:bits 8-15
+		makeCMV (H2D_CMV_READ, INFO, 54, 0, 1, NULL, TxMessage);
+		if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) {
+			MEI_MUTEX_UNLOCK (mei_sema);
+			return -EIO;
+		}
+		version = RxMessage[4];
+		count = sprintf (outputbuf, "%d.%d.", (version) & 0xff,
+				 (version >> 8) & 0xff);
+
+		//sub_version:bits 4-7
+		//int_version:bits 0-3
+		//spl_appl:bits 8-13
+		//rel_state:bits 14-15
+		makeCMV (H2D_CMV_READ, INFO, 54, 1, 1, NULL, TxMessage);
+		if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) {
+			MEI_MUTEX_UNLOCK (mei_sema);
+			return -EFAULT;
+		}
+		version = RxMessage[4];
+		count += sprintf (outputbuf + count, "%d.%d.%d.%d",
+				  (version >> 4) & 0xf,
+				  version & 0xf,
+				  (version >> 14) & 0x3,
+				  (version >> 8) & 0x3f);
+		//Date:bits 0-7
+		//Month:bits 8-15
+		makeCMV (H2D_CMV_READ, INFO, 55, 0, 1, NULL, TxMessage);
+		if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) {
+			MEI_MUTEX_UNLOCK (mei_sema);
+			return -EIO;
+		}
+		version = RxMessage[4];
+
+		//Hour:bits 0-7
+		//Minute:bits 8-15
+		makeCMV (H2D_CMV_READ, INFO, 55, 1, 1, NULL, TxMessage);
+		if (meiCMV (TxMessage, YES_REPLY, RxMessage) != MEI_SUCCESS) {
+			MEI_MUTEX_UNLOCK (mei_sema);
+			return -EFAULT;
+		}
+		version += (RxMessage[4] << 16);
+		count += sprintf (outputbuf + count, " %d/%d %d:%d\n",
+				  version & 0xff, (version >> 8) & 0xff,
+				  (version >> 25) & 0xff,
+				  (version >> 16) & 0xff);
+		MEI_MUTEX_UNLOCK (mei_sema);
+
+		*ppos += count;
+	}
+	else if (current_reg->flag != (int *) Recent_indicator) {
+		if (*ppos > 0)	/* Assume reading completed in previous read */
+			return 0;	// indicates end of file
+		count = sprintf (outputbuf, "0x%08X\n\n",
+				 *(current_reg->flag));
+		*ppos += count;
+		if (count > nbytes)	/* Assume output can be read at one time */
+			return -EINVAL;
+	}
+	else {
+		if ((int) (*ppos) / ((int) 7) == 16)
+			return 0;	// indicate end of the message
+		count = sprintf (outputbuf, "0x%04X\n\n",
+				 *(((u16 *) (current_reg->flag)) +
+				   (int) (*ppos) / ((int) 7)));
+		*ppos += count;
+	}
+	if (copy_to_user (buf, outputbuf, count))
+		return -EFAULT;
+	return count;
+}
+
+static ssize_t
+proc_write (struct file *file, const char *buffer, size_t count,
+	    loff_t * ppos)
+{
+	int i_ino = (file->f_dentry->d_inode)->i_ino;
+	reg_entry_t *current_reg = NULL;
+	int i;
+	unsigned long newRegValue;
+	char *endp;
+
+	for (i = 0; i < NUM_OF_REG_ENTRY; i++) {
+		if (regs[i].low_ino == i_ino) {
+			current_reg = &regs[i];
+			break;
+		}
+	}
+	if ((current_reg == NULL)
+	    || (current_reg->flag == (int *) Recent_indicator))
+		return -EINVAL;
+
+	newRegValue = simple_strtoul (buffer, &endp, 0);
+	*(current_reg->flag) = (int) newRegValue;
+	return (count + endp - buffer);
+}
+#endif //CONFIG_PROC_FS
+
+//TODO, for loopback test
+#ifdef DFE_LOOPBACK
+#define mte_reg_base	(0x4800*4+0x20000)
+
+/* Iridia Registers Address Constants */
+#define MTE_Reg(r)    	(int)(mte_reg_base + (r*4))
+
+#define IT_AMODE       	MTE_Reg(0x0004)
+
+#define OMBOX_BASE 	0xDF80
+#define OMBOX1 	(OMBOX_BASE+0x4)
+#define IMBOX_BASE 	0xDFC0
+
+#define TIMER_DELAY   	(1024)
+#define BC0_BYTES     	(32)
+#define BC1_BYTES     	(30)
+#define NUM_MB        	(12)
+#define TIMEOUT_VALUE 	2000
+
+static void
+BFMWait (u32 cycle)
+{
+	u32 i;
+	for (i = 0; i < cycle; i++);
+}
+
+static void
+WriteRegLong (u32 addr, u32 data)
+{
+	//*((volatile u32 *)(addr)) =  data; 
+	IFXMIPS_WRITE_REGISTER_L (data, addr);
+}
+
+static u32
+ReadRegLong (u32 addr)
+{
+	// u32  rd_val;
+	//rd_val = *((volatile u32 *)(addr));
+	// return rd_val;
+	return IFXMIPS_READ_REGISTER_L (addr);
+}
+
+/* This routine writes the mailbox with the data in an input array */
+static void
+WriteMbox (u32 * mboxarray, u32 size)
+{
+	meiDebugWrite (IMBOX_BASE, mboxarray, size);
+	printk ("write to %X\n", IMBOX_BASE);
+	meiLongwordWrite ( MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV);
+}
+
+/* This routine reads the output mailbox and places the results into an array */
+static void
+ReadMbox (u32 * mboxarray, u32 size)
+{
+	meiDebugRead (OMBOX_BASE, mboxarray, size);
+	printk ("read from %X\n", OMBOX_BASE);
+}
+
+static void
+MEIWriteARCValue (u32 address, u32 value)
+{
+	u32 i, check = 0;
+
+	/* Write address register */
+	IFXMIPS_WRITE_REGISTER_L (address, MEI_DEBUG_WAD);
+
+	/* Write data register */
+	IFXMIPS_WRITE_REGISTER_L (value, MEI_DEBUG_DATA);
+
+	/* wait until complete - timeout at 40 */
+	for (i = 0; i < 40; i++) {
+		check = IFXMIPS_READ_REGISTER_L (ARC_TO_MEI_INT);
+
+		if ((check & ARC_TO_MEI_DBG_DONE))
+			break;
+	}
+	/* clear the flag */
+	IFXMIPS_WRITE_REGISTER_L (ARC_TO_MEI_DBG_DONE, ARC_TO_MEI_INT);
+}
+
+void
+arc_code_page_download (uint32_t arc_code_length, uint32_t * start_address)
+{
+	int count;
+	printk ("try to download pages,size=%d\n", arc_code_length);
+	meiControlModeSwitch (MEI_MASTER_MODE);
+	if (arc_halt_flag == 0) {
+		meiHaltArc ();
+	}
+	meiLongwordWrite ( MEI_XFR_ADDR, 0);
+	for (count = 0; count < arc_code_length; count++) {
+		meiLongwordWrite ( MEI_DATA_XFR,
+				  *(start_address + count));
+	}
+	meiControlModeSwitch (JTAG_MASTER_MODE);
+}
+static int
+load_jump_table (unsigned long addr)
+{
+	int i;
+	uint32_t addr_le, addr_be;
+	uint32_t jump_table[32];
+	for (i = 0; i < 16; i++) {
+		addr_le = i * 8 + addr;
+		addr_be = ((addr_le >> 16) & 0xffff);
+		addr_be |= ((addr_le & 0xffff) << 16);
+		jump_table[i * 2 + 0] = 0x0f802020;
+		jump_table[i * 2 + 1] = addr_be;
+		//printk("jt %X %08X %08X\n",i,jump_table[i*2+0],jump_table[i*2+1]);
+	}
+	arc_code_page_download (32, &jump_table[0]);
+	return 0;
+}
+
+void
+dfe_loopback_irq_handler (void)
+{
+	uint32_t rd_mbox[10];
+
+	memset (&rd_mbox[0], 0, 10 * 4);
+	ReadMbox (&rd_mbox[0], 6);
+	if (rd_mbox[0] == 0x0) {
+		printk ("Get ARC_ACK\n");
+		got_int = 1;
+	}
+	else if (rd_mbox[0] == 0x5) {
+		printk ("Get ARC_BUSY\n");
+		got_int = 2;
+	}
+	else if (rd_mbox[0] == 0x3) {
+		printk ("Get ARC_EDONE\n");
+		if (rd_mbox[1] == 0x0) {
+			got_int = 3;
+			printk ("Get E_MEMTEST\n");
+			if (rd_mbox[2] != 0x1) {
+				got_int = 4;
+				printk ("Get Result %X\n",
+						 rd_mbox[2]);
+			}
+		}
+	}
+	meiLongwordWrite ( ARC_TO_MEI_INT, ARC_TO_MEI_DBG_DONE);
+	MEI_MASK_AND_ACK_IRQ (IFXMIPS_MEI_INT);
+	disable_irq (IFXMIPS_MEI_INT);
+	//got_int = 1;
+	return;
+}
+
+static void
+wait_mem_test_result (void)
+{
+	uint32_t mbox[5];
+	mbox[0] = 0;
+	printk ("Waiting Starting\n");
+	while (mbox[0] == 0) {
+		ReadMbox (&mbox[0], 5);
+	}
+	printk ("Try to get mem test result.\n");
+	ReadMbox (&mbox[0], 5);
+	if (mbox[0] == 0xA) {
+		printk ("Success.\n");
+	}
+	else if (mbox[0] == 0xA) {
+		printk
+			("Fail,address %X,except data %X,receive data %X\n",
+			 mbox[1], mbox[2], mbox[3]);
+	}
+	else {
+		printk ("Fail\n");
+	}
+}
+
+static int
+arc_ping_testing (void)
+{
+#define MEI_PING 0x00000001
+	uint32_t wr_mbox[10], rd_mbox[10];
+	int i;
+	for (i = 0; i < 10; i++) {
+		wr_mbox[i] = 0;
+		rd_mbox[i] = 0;
+	}
+
+	printk ("send ping msg\n");
+	wr_mbox[0] = MEI_PING;
+	WriteMbox (&wr_mbox[0], 10);
+
+	while (got_int == 0) {
+		MEI_WAIT (100);
+	}
+
+	printk ("send start event\n");
+	got_int = 0;
+
+	wr_mbox[0] = 0x4;
+	wr_mbox[1] = 0;
+	wr_mbox[2] = 0;
+	wr_mbox[3] = (uint32_t) 0xf5acc307e;
+	wr_mbox[4] = 5;
+	wr_mbox[5] = 2;
+	wr_mbox[6] = 0x1c000;
+	wr_mbox[7] = 64;
+	wr_mbox[8] = 0;
+	wr_mbox[9] = 0;
+	WriteMbox (&wr_mbox[0], 10);
+	enable_irq (IFXMIPS_MEI_INT);
+	//printk("meiMailboxWrite ret=%d\n",i);
+	meiLongwordWrite ( MEI_TO_ARC_INT, MEI_TO_ARC_MSGAV);
+	printk ("sleeping\n");
+	while (1) {
+		if (got_int > 0) {
+
+			if (got_int > 3)
+				printk ("got_int >>>> 3\n");
+			else
+				printk ("got int = %d\n", got_int);
+			got_int = 0;
+			//schedule();
+			enable_irq (IFXMIPS_MEI_INT);
+		}
+		//mbox_read(&rd_mbox[0],6);
+		MEI_WAIT (100);
+	}
+}
+
+static MEI_ERROR
+DFE_Loopback_Test (void)
+{
+	int i = 0;
+	u32 arc_debug_data = 0, temp;
+
+	meiResetARC ();
+	// start the clock
+	arc_debug_data = ACL_CLK_MODE_ENABLE;
+	meiDebugWrite (CRI_CCR0, &arc_debug_data, 1);
+
+#if defined( DFE_PING_TEST )|| defined( DFE_ATM_LOOPBACK)
+	// WriteARCreg(AUX_XMEM_LTEST,0);
+	meiControlModeSwitch (MEI_MASTER_MODE);
+#define AUX_XMEM_LTEST 0x128
+	_meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, AUX_XMEM_LTEST, 0);
+	meiControlModeSwitch (JTAG_MASTER_MODE);
+
+	// WriteARCreg(AUX_XDMA_GAP,0); 
+	meiControlModeSwitch (MEI_MASTER_MODE);
+#define AUX_XDMA_GAP 0x114
+	_meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, AUX_XDMA_GAP, 0);
+	meiControlModeSwitch (JTAG_MASTER_MODE);
+
+	meiControlModeSwitch (MEI_MASTER_MODE);
+	temp = 0;
+	_meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK,
+				(u32) MEI_XDATA_BASE_SH, temp);
+	meiControlModeSwitch (JTAG_MASTER_MODE);
+
+	i = alloc_processor_memory (SDRAM_SEGMENT_SIZE * 16, adsl_mem_info);
+	if (i >= 0) {
+		int idx;
+
+		for (idx = 0; idx < i; idx++) {
+			adsl_mem_info[idx].type = FREE_RELOAD;
+			IFXMIPS_WRITE_REGISTER_L ((((uint32_t)
+						   adsl_mem_info[idx].
+						   address) & 0x0fffffff),
+						 MEI_XMEM_BAR_BASE + idx * 4);
+			printk ("bar%d(%X)=%X\n", idx,
+					 MEI_XMEM_BAR_BASE + idx * 4,
+					 (((uint32_t) adsl_mem_info[idx].
+					   address) & 0x0fffffff));
+			memset ((u8 *) adsl_mem_info[idx].address, 0,
+				SDRAM_SEGMENT_SIZE);
+		}
+
+		meiLongwordWrite ( MEI_XDATA_BASE_SH, ((unsigned long)
+							    adsl_mem_info
+							    [XDATA_REGISTER].
+							    address) &
+				  0x0FFFFFFF);
+
+	}
+	else {
+		printk ("cannot load image: no memory\n\n");
+		return MEI_FAILURE;
+	}
+	//WriteARCreg(AUX_IC_CTRL,2);
+	meiControlModeSwitch (MEI_MASTER_MODE);
+#define AUX_IC_CTRL 0x11
+	_meiDebugLongWordWrite (MEI_DEBUG_DEC_AUX_MASK, AUX_IC_CTRL, 2);
+	meiControlModeSwitch (JTAG_MASTER_MODE);
+
+	meiHaltArc ();
+
+#ifdef DFE_PING_TEST
+
+	printk ("ping test image size=%d\n", sizeof (code_array));
+	memcpy ((u8 *) (adsl_mem_info[0].address + 0x1004), &code_array[0],
+		sizeof (code_array));
+	load_jump_table (0x80000 + 0x1004);
+
+#endif //DFE_PING_TEST
+
+	printk ("ARC ping test code download complete\n");
+#endif //defined( DFE_PING_TEST )|| defined( DFE_ATM_LOOPBACK)
+#ifdef DFE_MEM_TEST
+	meiLongwordWrite (ARC_TO_MEI_INT_MASK, MSGAV_EN);
+
+	arc_code_page_download (1537, &mem_test_code_array[0]);
+	printk ("ARC mem test code download complete\n");
+#endif //DFE_MEM_TEST
+#ifdef DFE_ATM_LOOPBACK
+	arc_debug_data = 0xf;
+	arc_code_page_download (1077, &code_array[0]);
+	// Start Iridia IT_AMODE (in dmp access) why is it required?
+	meiDebugWrite (0x32010, &arc_debug_data, 1);
+#endif //DFE_ATM_LOOPBACK
+	meiMailboxInterruptsEnable ();
+	meiRunArc ();
+
+#ifdef DFE_PING_TEST
+	arc_ping_testing ();
+#endif //DFE_PING_TEST
+#ifdef DFE_MEM_TEST
+	wait_mem_test_result ();
+#endif //DFE_MEM_TEST
+
+	free_image_buffer (FREE_ALL);
+	return MEI_SUCCESS;
+}
+
+#endif //DFE_LOOPBACK
+//end of TODO, for loopback test
+
+#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT)
+
+/* 
+ *  Led Thread Main function
+ */
+static int
+led_poll (void *unused)
+{
+	struct task_struct *tsk = current;
+
+	daemonize("mei_led_poll");
+	strcpy (tsk->comm, "atm_led");
+	sigfillset (&tsk->blocked);
+
+	stop_led_module = 0;	//begin polling ...
+
+	while (!stop_led_module) {
+		if (led_status_on || led_need_to_flash) {
+			adsl_led_flash_task ();
+		}
+		if (led_status_on)	//sleep 200 ms to check if need to turn led off
+		{
+			interruptible_sleep_on_timeout
+				(&wait_queue_led_polling, 25);
+		}
+		else {
+			interruptible_sleep_on (&wait_queue_led_polling);
+		}
+	}
+	return 0;
+}
+
+/* 
+ * API for atm driver to notify led thread a data coming/sending 
+ */
+#if defined (CONFIG_ATM_IFXMIPS)
+static int
+adsl_led_flash (void)
+{
+	if (!modem_ready)
+		return 0;
+
+	if (led_status_on == 0 && led_need_to_flash == 0)
+	{
+		wake_up_interruptible (&wait_queue_led_polling);	//wake up and clean led module 
+	}
+	led_need_to_flash = 1;	//asking to flash led
+
+	return 0;
+}
+#endif
+/*
+ * Main task for led controlling.
+ */
+static int
+adsl_led_flash_task (void)
+{
+#ifdef DATA_LED_ADSL_FW_HANDLE
+	u16 one = 1;
+	u16 zero = 0;
+	u16 data = 0x0600;
+	u16 CMVMSG[MSG_LENGTH];
+#endif
+
+//      printk("Task Running...\n");    //joelin  test
+
+	if (!showtime) {
+		led_need_to_flash = 0;
+		led_status_on = 0;
+		return 0;
+	}
+
+	if (led_status_on == 0 && led_need_to_flash == 1) {
+
+#ifdef DATA_LED_ADSL_FW_HANDLE
+		data = 0x0901;	//flash
+		send_cmv (H2D_CMV_WRITE, INFO, 91, 5, 1, &data, CMVMSG);	//use GPIO9 for TR68 data led .flash.
+#else
+		ifxmips_led_blink_set(0x0); // data
+		ifxmips_led_blink_set(0x1); // link
+#endif
+		led_status_on = 1;
+
+	}
+	else if (led_status_on == 1 && led_need_to_flash == 0) {
+#ifdef DATA_LED_ADSL_FW_HANDLE
+#ifdef DATA_LED_ON_MODE
+		data = 0x0903;	//use GPIO9 for TR68 data led .turn on.
+#else
+		data = 0x0900;	//off
+#endif
+		printk ("off %04X\n", data);
+		send_cmv (H2D_CMV_WRITE, INFO, 91, 5, 1, &data, CMVMSG);	//use GPIO9 for TR68 data led .off.
+#else
+#endif
+		led_status_on = 0;
+	}
+	led_need_to_flash = 0;
+	return 0;
+}
+
+/* 
+ * Led initialization function
+ * This function create a thread to polling atm traffic and do led blanking
+ */
+static int
+ifxmips_mei_led_init (void)
+{
+	init_waitqueue_head (&wait_queue_led_polling);	// adsl led for led function
+	kernel_thread (led_poll, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGHAND | CLONE_THREAD);
+	return 0;
+}
+
+/* 
+ * Led destory function
+ */
+static int
+ifxmips_mei_led_cleanup (void)
+{
+	stop_led_module = 1;	//wake up and clean led module 
+	wake_up_interruptible (&wait_queue_led_polling);	//wake up and clean led module   
+	return 0;
+}
+#endif //#ifdef CONFIG_IFXMIPS_MEI_LED
+
+////////////////////////////////////////////////////////////////////////////
+int __init
+ifxmips_mei_init_module (void)
+{
+	struct proc_dir_entry *entry;
+	int i;
+	u32 temp;
+#ifdef CONFIG_DEVFS_FS
+	char buf[10];
+#endif
+	reg_entry_t regs_temp[PROC_ITEMS] =	// Items being debugged
+	{
+		/*  {   flag,                   name,              description } */
+		{&arcmsgav, "arcmsgav", "arc to mei message ", 0},
+		{&cmv_reply, "cmv_reply", "cmv needs reply", 0},
+		{&cmv_waiting, "cmv_waiting",
+		 "waiting for cmv reply from arc", 0},
+		{&indicator_count, "indicator_count",
+		 "ARC to MEI indicator count", 0},
+		{&cmv_count, "cmv_count", "MEI to ARC CMVs", 0},
+		{&reply_count, "reply_count", "ARC to MEI Reply", 0},
+		{(int *) Recent_indicator, "Recent_indicator",
+		 "most recent indicator", 0},
+		{(int *) 8, "version", "version of firmware", 0},
+	};
+	do_gettimeofday (&time_disconnect);
+
+	printk ("Danube MEI version:%s\n", IFXMIPS_MEI_VERSION);
+
+	memcpy ((char *) regs, (char *) regs_temp, sizeof (regs_temp));
+	MEI_MUTEX_INIT (mei_sema, 1);	// semaphore initialization, mutex
+	MEI_INIT_WAKELIST ("arcq", wait_queue_arcmsgav);	// for ARCMSGAV
+	MEI_INIT_WAKELIST ("arcldq", wait_queue_loop_diagnostic);	// for loop diagnostic function
+#ifdef IFX_ADSL_L3_MODE_SUPPORT
+	MEI_INIT_WAKELIST ("arcl3q", wait_queue_l3);	// for l3 power mode
+#endif //IFX_ADSL_L3_MODE_SUPPORT
+
+
+	memset (&adsl_mem_info[0], 0, sizeof (smmu_mem_info_t) * MAX_BAR_REGISTERS);
+#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT)
+	printk("not enabling mei leds due to bug that makes the board hang\n");
+//	ifxmips_mei_led_init ();
+#endif
+
+#ifdef CONFIG_IFXMIPS_MEI_MIB
+	ifxmips_mei_mib_init ();
+#endif
+
+#ifdef IFXMIPS_CLEAR_EOC
+	MEI_INIT_WAKELIST ("arceoc", wait_queue_hdlc_poll);
+	ifxmips_mei_ceoc_init ();
+#endif
+	// power up mei 
+	temp = readl(IFXMIPS_PMU_PWDCR);
+	temp &= 0xffff7dbe;
+	writel(temp, IFXMIPS_PMU_PWDCR);
+
+#if defined (CONFIG_ATM_IFXMIPS)
+	IFX_ATM_LED_Callback_Register (adsl_led_flash);
+#endif
+	if (register_chrdev (major, IFXMIPS_MEI_DEVNAME, &mei_operations) != 0) {
+		printk("\n\n unable to register major for ifxmips_mei!!!");
+		return -ENODEV;
+	} else {
+		printk("registered ifxmips_mei on #%d\n", major);
+	}
+
+	disable_irq(IFXMIPS_MEI_INT);
+
+	if (request_irq(IFXMIPS_MEI_INT, mei_interrupt_arcmsgav, 0, "ifxmips_mei_arcmsgav", NULL) != 0) {
+		printk("\n\n unable to register irq(%d) for ifxmips_mei!!!",
+			IFXMIPS_MEI_INT);
+		return -1;
+	}
+
+//	enable_irq(IFXMIPS_MEI_INT);
+	// procfs
+	meidir = proc_mkdir(MEI_DIRNAME, &proc_root);
+	if (meidir == NULL)
+	{
+		printk(": can't create /proc/" MEI_DIRNAME "\n\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < NUM_OF_REG_ENTRY; i++) {
+		entry = create_proc_entry (regs[i].name,
+					   S_IWUSR | S_IRUSR | S_IRGRP | S_IROTH, meidir);
+		if (entry)
+		{
+			regs[i].low_ino = entry->low_ino;
+			entry->proc_fops = &proc_operations;
+		} else {
+			printk (": can't create /proc/" MEI_DIRNAME "/%s\n\n", regs[i].name);
+			return -ENOMEM;
+		}
+	}
+
+	///////////////////////////////// register net device ////////////////////////////
+#ifdef DFE_LOOPBACK
+	DFE_Loopback_Test ();
+#endif //DFE_LOOPBACK
+	return 0;
+}
+
+void __exit
+ifxmips_mei_cleanup_module (void)
+{
+	int i;
+
+#if defined(CONFIG_IFXMIPS_MEI_LED) && defined(DATA_LED_SUPPORT)
+	ifxmips_mei_led_cleanup ();
+#endif
+	showtime = 0;		//joelin,clear task
+
+#ifdef CONFIG_PROC_FS
+	for (i = 0; i < NUM_OF_REG_ENTRY; i++)
+		remove_proc_entry (regs[i].name, meidir);
+
+	remove_proc_entry (MEI_DIRNAME, &proc_root);
+#endif //CONFIG_PROC_FS
+
+#if defined (CONFIG_ATM_IFXMIPS)
+	IFX_ATM_LED_Callback_Unregister (adsl_led_flash);
+#endif
+	disable_irq (IFXMIPS_MEI_INT);
+	free_irq(IFXMIPS_MEI_INT, NULL);
+
+#ifdef CONFIG_DEVFS_FS
+	devfs_unregister (mei_devfs_handle);
+#else
+	unregister_chrdev (major, "ifxmips_mei");
+#endif
+#ifdef CONFIG_IFXMIPS_MEI_MIB
+	ifxmips_mei_mib_cleanup ();
+#endif
+
+	free_image_buffer (FREE_ALL);
+	return;
+}
+
+EXPORT_SYMBOL (meiDebugRead);
+EXPORT_SYMBOL (meiDebugWrite);
+EXPORT_SYMBOL (ifx_me_hdlc_send);
+EXPORT_SYMBOL (ifx_mei_hdlc_read);
+MODULE_LICENSE ("GPL");
+
+module_init (ifxmips_mei_init_module);
+module_exit (ifxmips_mei_cleanup_module);
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h
new file mode 100644
index 0000000000..c4a9929f6b
--- /dev/null
+++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_led.h
@@ -0,0 +1,22 @@
+/*
+ *   This program is free software; you can redistribute it and/or modify
+ *   it under the terms of the GNU General Public License as published by
+ *   the Free Software Foundation; either version 2 of the License, or
+ *   (at your option) any later version.
+ *
+ *   This program is distributed in the hope that it will be useful,
+ *   but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *   GNU General Public License for more details.
+ *
+ *   You should have received a copy of the GNU General Public License
+ *   along with this program; if not, write to the Free Software
+ *   Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ *   Copyright (C) 2007 John Crispin <blogic@openwrt.org> 
+ */
+
+extern void ifxmips_led_set(unsigned int led);
+extern void ifxmips_led_clear(unsigned int led);
+extern void ifxmips_led_blink_set(unsigned int led);
+extern void ifxmips_led_blink_clear(unsigned int led);
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h
new file mode 100644
index 0000000000..d8a4b8867f
--- /dev/null
+++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei.h
@@ -0,0 +1,270 @@
+/******************************************************************************
+**
+** FILE NAME    : danube_mei.h
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+*******************************************************************************/
+#ifndef		_IFXMIPS_MEI_H
+#define        	_IFXMIPS_MEI_H
+/////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#include "ifxmips_mei_app.h"
+
+#define IFXMIPS_MEI_DEBUG
+#define IFXMIPS_MEI_CMV_EXTRA
+#define IFXMIPS_MEI_MAJOR	106
+
+/*
+**	Define where in ME Processor's memory map the Stratify chip lives
+*/
+
+#define MAXSWAPSIZE      	8 * 1024	//8k *(32bits)
+
+//      Mailboxes
+#define MSG_LENGTH		16	// x16 bits
+#define YES_REPLY      	 	1
+#define NO_REPLY         	0
+
+#define CMV_TIMEOUT		100	//jiffies
+#define MIB_INTERVAL		10000	//msec
+
+/***  Bit definitions ***/
+
+#define FALSE	0
+#define TRUE	1
+#define BIT0	1<<0
+#define BIT1	1<<1
+#define BIT2	1<<2
+#define BIT3	1<<3
+#define BIT4	1<<4
+#define BIT5	1<<5
+#define BIT6	1<<6
+#define BIT7	1<<7
+#define BIT8	1<<8
+#define BIT9	1<<9
+#define BIT10 	1<<10
+#define BIT11	1<<11
+#define BIT12	1<<12
+#define BIT13	1<<13
+#define BIT14	1<<14
+#define BIT15	1<<15
+#define BIT16 	1<<16
+#define BIT17	1<<17
+#define BIT18	1<<18
+#define BIT19	1<<19
+#define BIT20	1<<20
+#define BIT21	1<<21
+#define BIT22	1<<22
+#define BIT23	1<<23
+#define BIT24	1<<24
+#define BIT25	1<<25
+#define BIT26	1<<26
+#define BIT27	1<<27
+#define BIT28	1<<28
+#define BIT29	1<<29
+#define BIT30	1<<30
+#define BIT31	1<<31
+
+// ARC register addresss 
+#define ARC_STATUS				0x0
+#define ARC_LP_START				0x2
+#define ARC_LP_END				0x3
+#define ARC_DEBUG				0x5
+#define ARC_INT_MASK				0x10A
+
+#define IRAM0_BASE 				(0x00000)
+#define IRAM1_BASE 				(0x04000)
+#define BRAM_BASE  				(0x0A000)
+
+#define ADSL_BASE				(0x20000)
+#define CRI_BASE				(ADSL_BASE + 0x11F00)
+#define CRI_CCR0				(CRI_BASE + 0x00)
+#define CRI_RST					(CRI_BASE + 0x04*4)
+#define ADSL_DILV_BASE 				(ADSL_BASE+0x20000)
+
+//
+#define IRAM0_ADDR_BIT_MASK   0xFFF
+#define IRAM1_ADDR_BIT_MASK   0xFFF
+#define BRAM_ADDR_BIT_MASK    0xFFF
+#define RX_DILV_ADDR_BIT_MASK 0x1FFF
+
+// CRI_CCR0 Register definitions        
+#define CLK_2M_MODE_ENABLE			BIT6
+#define	ACL_CLK_MODE_ENABLE			BIT4
+#define FDF_CLK_MODE_ENABLE			BIT2
+#define STM_CLK_MODE_ENABLE			BIT0
+
+// CRI_RST Register definitions 
+#define FDF_SRST				BIT3
+#define MTE_SRST				BIT2
+#define FCI_SRST				BIT1
+#define AAI_SRST				BIT0
+
+//      MEI_TO_ARC_INTERRUPT Register definitions
+#define	MEI_TO_ARC_INT1			BIT3
+#define	MEI_TO_ARC_INT0			BIT2
+#define MEI_TO_ARC_CS_DONE		BIT1	//need to check
+#define	MEI_TO_ARC_MSGAV		BIT0
+
+//      ARC_TO_MEI_INTERRUPT Register definitions
+#define	ARC_TO_MEI_INT1			BIT8
+#define	ARC_TO_MEI_INT0			BIT7
+#define	ARC_TO_MEI_CS_REQ		BIT6
+#define	ARC_TO_MEI_DBG_DONE		BIT5
+#define	ARC_TO_MEI_MSGACK		BIT4
+#define	ARC_TO_MEI_NO_ACCESS		BIT3
+#define	ARC_TO_MEI_CHECK_AAITX		BIT2
+#define	ARC_TO_MEI_CHECK_AAIRX		BIT1
+#define	ARC_TO_MEI_MSGAV		BIT0
+
+//      ARC_TO_MEI_INTERRUPT_MASK Register definitions
+#define	GP_INT1_EN			BIT8
+#define	GP_INT0_EN			BIT7
+#define	CS_REQ_EN			BIT6
+#define	DBG_DONE_EN			BIT5
+#define	MSGACK_EN			BIT4
+#define	NO_ACC_EN			BIT3
+#define	AAITX_EN			BIT2
+#define	AAIRX_EN			BIT1
+#define	MSGAV_EN			BIT0
+
+#define	MEI_SOFT_RESET			BIT0
+
+#define	HOST_MSTR			BIT0
+
+#define JTAG_MASTER_MODE		0x0
+#define MEI_MASTER_MODE			HOST_MSTR
+
+//      MEI_DEBUG_DECODE Register definitions
+#define MEI_DEBUG_DEC_MASK		(0x3)
+#define MEI_DEBUG_DEC_AUX_MASK		(0x0)
+#define MEI_DEBUG_DEC_DMP1_MASK		(0x1)
+#define MEI_DEBUG_DEC_DMP2_MASK		(0x2)
+#define MEI_DEBUG_DEC_CORE_MASK         (0x3)
+
+#define AUX_STATUS			(0x0)
+//      ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
+//      page swap requests.
+#define MEI_TO_ARC_MAILBOX		(0xDFD0)
+#define MEI_TO_ARC_MAILBOXR		(MEI_TO_ARC_MAILBOX + 0x2C)
+
+#define	ARC_TO_MEI_MAILBOX		(0xDFA0)
+#define ARC_MEI_MAILBOXR		(ARC_TO_MEI_MAILBOX + 0x2C)
+
+// Codeswap request messages are indicated by setting BIT31 
+#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK	(0x80000000)
+
+// Clear Eoc messages received are indicated by setting BIT17 
+#define OMB_CLEAREOC_INTERRUPT_CODE	(0x00020000)
+
+/*
+**	Swap page header
+*/
+//      Page must be loaded at boot time if size field has BIT31 set
+#define BOOT_FLAG	(BIT31)
+#define BOOT_FLAG_MASK	~BOOT_FLAG
+
+#define FREE_RELOAD		1
+#define FREE_SHOWTIME		2
+#define FREE_ALL		3
+
+#define IFX_POP_EOC_DONE	0
+#define IFX_POP_EOC_FAIL	-1
+
+#define CLREOC_BUFF_SIZE	12	//number of clreoc commands being buffered
+
+// marcos
+#define	IFXMIPS_WRITE_REGISTER_L(data,addr)	do{ *((volatile u32*)(addr)) = (u32)(data);} while (0)
+#define IFXMIPS_READ_REGISTER_L(addr) 	(*((volatile u32*)(addr)))
+#define SET_BIT(reg, mask)                  reg |= (mask)
+#define CLEAR_BIT(reg, mask)                reg &= (~mask)
+#define CLEAR_BITS(reg, mask)               CLEAR_BIT(reg, mask)
+#define SET_BITS(reg, mask)                 SET_BIT(reg, mask)
+#define SET_BITFIELD(reg, mask, off, val)   {reg &= (~mask); reg |= (val << off);}
+
+#define ALIGN_SIZE			    ( 1L<<10 )	//1K size align
+#define MEM_ALIGN(addr)		    (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
+
+// swap marco
+#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
+#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
+
+//      Swap page header describes size in 32-bit words, load location, and image offset
+//      for program and/or data segments
+typedef struct _arc_swp_page_hdr {
+	u32 p_offset;		//Offset bytes of progseg from beginning of image
+	u32 p_dest;		//Destination addr of progseg on processor
+	u32 p_size;		//Size in 32-bitwords of program segment
+	u32 d_offset;		//Offset bytes of dataseg from beginning of image
+	u32 d_dest;		//Destination addr of dataseg on processor
+	u32 d_size;		//Size in 32-bitwords of data segment
+} ARC_SWP_PAGE_HDR;
+
+#ifdef CONFIG_PROC_FS
+typedef struct reg_entry {
+	int *flag;
+	char name[30];		// big enough to hold names
+	char description[100];	// big enough to hold description
+	unsigned short low_ino;
+} reg_entry_t;
+#endif
+
+/*
+**	Swap image header
+*/
+#define GET_PROG	0	//      Flag used for program mem segment
+#define GET_DATA	1	//      Flag used for data mem segment
+
+//      Image header contains size of image, checksum for image, and count of
+//      page headers. Following that are 'count' page headers followed by
+//      the code and/or data segments to be loaded
+typedef struct _arc_img_hdr {
+	u32 size;		//      Size of binary image in bytes
+	u32 checksum;		//      Checksum for image
+	u32 count;		//      Count of swp pages in image
+	ARC_SWP_PAGE_HDR page[1];	//      Should be "count" pages - '1' to make compiler happy
+} ARC_IMG_HDR;
+
+typedef struct smmu_mem_info {
+	int type;
+	unsigned long nCopy;
+	unsigned long size;
+	unsigned char *address;
+	unsigned char *org_address;
+} smmu_mem_info_t;
+
+/*
+**	Native size for the Stratiphy interface is 32-bits. All reads and writes
+**	MUST be aligned on 32-bit boundaries. Trickery must be invoked to read word and/or
+**	byte data. Read routines are provided. Write routines are probably a bad idea, as the
+**	Arc has unrestrained, unseen access to the same memory, so a read-modify-write cycle
+**	could very well have unintended results.
+*/
+MEI_ERROR meiCMV (u16 *, int, u16 *);	// first arg is CMV to ARC, second to indicate whether need reply
+
+MEI_ERROR meiDebugWrite (u32 destaddr, u32 * databuff, u32 databuffsize);
+extern int ifx_mei_hdlc_send (char *hdlc_pkt, int hdlc_pkt_len);
+extern int ifx_mei_hdlc_read (char *hdlc_pkt, int max_hdlc_pkt_len);
+#if defined(__KERNEL__) || defined (IFXMIPS_PORT_RTEMS)
+extern void makeCMV (u8 opcode, u8 group, u16 address, u16 index, int size,
+		     u16 * data, u16 * CMVMSG);
+int ifx_mei_hdlc_send (char *, int);
+int ifx_mei_hdlc_read (char *, int);
+#endif
+
+#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h
new file mode 100644
index 0000000000..cba742e58a
--- /dev/null
+++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app.h
@@ -0,0 +1,116 @@
+/******************************************************************************
+**
+** FILE NAME    : ifxmips_mei_app.h
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+*******************************************************************************/
+#ifndef       	_IFXMIPS_MEI_APP_H
+#define        	_IFXMIPS_MEI_APP_H
+		//  ioctl control
+#define IFXMIPS_MEI_START 	                       	300
+#define IFXMIPS_MEI_REPLY                           	301
+#define IFXMIPS_MEI_NOREPLY                      	302
+
+#define IFXMIPS_MEI_RESET				303
+#define IFXMIPS_MEI_REBOOT				304
+#define IFXMIPS_MEI_HALT					305
+#define IFXMIPS_MEI_CMV_WINHOST				306
+#define IFXMIPS_MEI_CMV_READ				307
+#define IFXMIPS_MEI_CMV_WRITE				308
+#define IFXMIPS_MEI_MIB_DAEMON				309
+#define IFXMIPS_MEI_SHOWTIME				310
+#define IFXMIPS_MEI_REMOTE				311
+#define IFXMIPS_MEI_READDEBUG				312
+#define IFXMIPS_MEI_WRITEDEBUG				313
+#define IFXMIPS_MEI_LOP					314
+
+#define IFXMIPS_MEI_PCM_SETUP				315
+#define IFXMIPS_MEI_PCM_START_TIMER			316
+#define IFXMIPS_MEI_PCM_STOP_TIMER			317
+#define IFXMIPS_MEI_PCM_CHECK				318
+#define IFXMIPS_MEI_GET_EOC_LEN				319
+#define IFXMIPS_MEI_GET_EOC_DATA				320
+#define IFXMIPS_MEI_PCM_GETDATA				321
+#define IFXMIPS_MEI_PCM_GPIO				322
+#define IFXMIPS_MEI_EOC_SEND				323
+#define IFXMIPS_MEI_DOWNLOAD				326
+#define IFXMIPS_MEI_JTAG_ENABLE				327
+#define IFXMIPS_MEI_RUN					328
+#define IFXMIPS_MEI_DEBUG_MODE				329
+
+/* Loop diagnostics mode of the ADSL line related constants */
+#define SET_ADSL_LOOP_DIAGNOSTICS_MODE 			330
+#define GET_ADSL_LOOP_DIAGNOSTICS_MODE 			331
+#define LOOP_DIAGNOSTIC_MODE_COMPLETE                   332
+#define IS_ADSL_LOOP_DIAGNOSTICS_MODE_COMPLETE		333
+
+/* L3 Power Mode */
+/* Get current Power Moaagement Mode Status*/
+#define GET_POWER_MANAGEMENT_MODE			334
+/* Set L3 Power Mode /disable L3 power mode */
+#define SET_L3_POWER_MODE				335
+
+/* get current dual latency configuration */
+#define GET_ADSL_DUAL_LATENCY				336
+/* enable/disable dual latency path */
+#define SET_ADSL_DUAL_LATENCY				337
+
+/* Enable/Disable autoboot mode. */
+/* When the autoboot mode is disabled, the driver will excute some cmv 
+   commands for led control and dual latency when DSL startup.*/
+#define AUTOBOOT_ENABLE_SET				338
+
+/* Enable/Disable Quiet Mode*/
+/* Quiet mode is used for firmware debug. if the quiet mode enable, the autoboot daemon will not reset arc when the arc need to reboot */
+#define QUIET_MODE_GET					339
+#define QUIET_MODE_SET					340
+
+/* Enable/Disable showtime lock*/
+/* showtime lock is used for firmware debug. if the showtime lock enable, the autoboot daemon will not reset arc when the arc reach showtime and need to reboot */
+#define SHOWTIME_LOCK_GET				341
+#define SHOWTIME_LOCK_SET				342
+
+#define L0_POWER_MODE 0
+#define L2_POWER_MODE 2
+#define L3_POWER_MODE 3
+
+#define DUAL_LATENCY_US_DS_DISABLE			0
+#define DUAL_LATENCY_US_ENABLE				(1<<0)
+#define DUAL_LATENCY_DS_ENABLE				(1<<1)
+#define DUAL_LATENCY_US_DS_ENABLE			(DUAL_LATENCY_US_ENABLE|DUAL_LATENCY_DS_ENABLE)
+
+#define ME_HDLC_IDLE 0
+#define ME_HDLC_INVALID_MSG 1
+#define ME_HDLC_MSG_QUEUED 2
+#define ME_HDLC_MSG_SENT 3
+#define ME_HDLC_RESP_RCVD 4
+#define ME_HDLC_RESP_TIMEOUT 5
+#define ME_HDLC_RX_BUF_OVERFLOW 6
+#define ME_HDLC_UNRESOLVED 1
+#define ME_HDLC_RESOLVED 2
+
+/***	Enums    ***/
+typedef enum mei_error {
+	MEI_SUCCESS = 0,
+	MEI_FAILURE = -1,
+	MEI_MAILBOX_FULL = -2,
+	MEI_MAILBOX_EMPTY = -3,
+	MEI_MAILBOX_TIMEOUT = -4,
+} MEI_ERROR;
+
+#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h
new file mode 100644
index 0000000000..08c3dd3fc1
--- /dev/null
+++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_app_ioctl.h
@@ -0,0 +1,1191 @@
+/******************************************************************************
+**
+** FILE NAME    : ifxmips_mei_app_ioctl.h
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+*******************************************************************************/
+#ifndef __IFXMIPS_MEI_APP_IOCTL_H
+#define __IFXMIPS_MEI_APP_IOCTL_H
+
+#ifdef __KERNEL__
+#include "ifxmips_mei_ioctl.h"
+#endif
+
+/* Interface Name */
+//#define INTERFACE_NAME <define the interface>
+
+/* adslLineTable constants */
+#define GET_ADSL_LINE_CODE		1
+
+/* adslAtucPhysTable constants */
+#define GET_ADSL_ATUC_PHY		4
+
+/* adslAturPhysTable constants */
+#define GET_ADSL_ATUR_PHY		10
+
+/* adslAtucChanTable constants */
+#define GET_ADSL_ATUC_CHAN_INFO 	15
+
+/* adslAturChanTable constants */
+#define GET_ADSL_ATUR_CHAN_INFO		18
+
+/* adslAtucPerfDataTable constants */
+#define GET_ADSL_ATUC_PERF_DATA		21
+
+/* adslAturPerfDataTable constants */
+#define GET_ADSL_ATUR_PERF_DATA		40
+
+/* adslAtucIntervalTable constants */
+#define GET_ADSL_ATUC_INTVL_INFO	60
+
+/* adslAturIntervalTable constants */
+#define GET_ADSL_ATUR_INTVL_INFO	65
+
+/* adslAtucChanPerfDataTable constants */
+#define GET_ADSL_ATUC_CHAN_PERF_DATA	70
+
+/* adslAturChanPerfDataTable constants */
+#define GET_ADSL_ATUR_CHAN_PERF_DATA	90
+
+/* adslAtucChanIntervalTable constants */
+#define GET_ADSL_ATUC_CHAN_INTVL_INFO	110
+
+/* adslAturChanIntervalTable constants */
+#define GET_ADSL_ATUR_CHAN_INTVL_INFO	115
+
+/* adslLineAlarmConfProfileTable constants */
+#define GET_ADSL_ALRM_CONF_PROF		120
+#define SET_ADSL_ALRM_CONF_PROF		121
+
+/* adslAturTrap constants */
+#define ADSL_ATUR_TRAPS			135
+
+//////////////////  RFC-3440 //////////////
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+/* adslLineExtTable */
+#define GET_ADSL_ATUC_LINE_EXT		201
+#define SET_ADSL_ATUC_LINE_EXT		203
+
+/* adslAtucPerfDateExtTable */
+#define GET_ADSL_ATUC_PERF_DATA_EXT	205
+
+/* adslAtucIntervalExtTable */
+#define GET_ADSL_ATUC_INTVL_EXT_INFO	221
+
+/* adslAturPerfDataExtTable */
+#define GET_ADSL_ATUR_PERF_DATA_EXT	225
+
+/* adslAturIntervalExtTable */
+#define GET_ADSL_ATUR_INTVL_EXT_INFO	233
+
+/* adslAlarmConfProfileExtTable */
+#define GET_ADSL_ALRM_CONF_PROF_EXT	235
+#define SET_ADSL_ALRM_CONF_PROF_EXT	236
+
+/* adslAturExtTrap */
+#define ADSL_ATUR_EXT_TRAPS		240
+
+#endif
+
+/* The following constants are added to support the WEB related ADSL Statistics */
+
+/* adslLineStatus constants */
+#define GET_ADSL_LINE_STATUS		245
+
+/* adslLineRate constants */
+#define GET_ADSL_LINE_RATE		250
+
+/* adslLineInformation constants */
+#define GET_ADSL_LINE_INFO		255
+
+/* adslNearEndPerformanceStats constants */
+#define GET_ADSL_NEAREND_STATS	270
+
+/* adslFarEndPerformanceStats constants */
+#define GET_ADSL_FAREND_STATS	290
+
+/* Sub-carrier related parameters */
+#define GET_ADSL_LINE_INIT_STATS	150
+#define GET_ADSL_POWER_SPECTRAL_DENSITY	151
+
+#define IFXMIPS_MIB_LO_ATUC		295
+#define IFXMIPS_MIB_LO_ATUR		296
+
+#define GET_ADSL_ATUC_SUBCARRIER_STATS	297
+#define GET_ADSL_ATUR_SUBCARRIER_STATS	298
+
+
+
+///////////////////////////////////////////////////////////
+// makeCMV(Opcode, Group, Address, Index, Size, Data)
+
+/* adslLineCode Flags */
+#define LINE_CODE_FLAG			0x1	/* BIT 0th position */
+
+/* adslAtucPhysTable Flags */
+#define ATUC_PHY_SER_NUM_FLAG		0x1	/* BIT 0th position */
+#define ATUC_PHY_SER_NUM_FLAG_MAKECMV1	makeCMV(H2D_CMV_READ, INFO, 57, 0, 12, data,TxMessage) 
+#define ATUC_PHY_SER_NUM_FLAG_MAKECMV2	makeCMV(H2D_CMV_READ, INFO, 57, 12, 4, data,TxMessage) 
+
+#define ATUC_PHY_VENDOR_ID_FLAG		0x2	/* BIT 1 */
+#define ATUC_PHY_VENDOR_ID_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 64, 0, 4, data,TxMessage)
+
+#define ATUC_PHY_VER_NUM_FLAG		0x4	/* BIT 2 */
+#define ATUC_PHY_VER_NUM_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 58, 0, 8, data,TxMessage)
+
+#define ATUC_CURR_STAT_FLAG		0x8	/* BIT 3 */
+
+#define ATUC_CURR_OUT_PWR_FLAG		0x10	/* BIT 4 */
+#define ATUC_CURR_OUT_PWR_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 68, 5, 1, data,TxMessage)
+
+#define ATUC_CURR_ATTR_FLAG		0x20	/* BIT 5 */
+#define ATUC_CURR_ATTR_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 69, 0, 2, data,TxMessage)
+
+
+/* adslAturPhysTable	Flags */
+#define ATUR_PHY_SER_NUM_FLAG		0x1	/* BIT 0th position */
+#define ATUR_PHY_SER_NUM_FLAG_MAKECMV1	makeCMV(H2D_CMV_READ, INFO, 62, 0, 12, data,TxMessage)
+#define ATUR_PHY_SER_NUM_FLAG_MAKECMV2	makeCMV(H2D_CMV_READ, INFO, 62, 12, 4, data,TxMessage)
+
+#define ATUR_PHY_VENDOR_ID_FLAG		0x2	/* BIT 1 */
+#define ATUR_PHY_VENDOR_ID_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 65, 0, 4, data,TxMessage)
+
+#define ATUR_PHY_VER_NUM_FLAG		0x4	/* BIT 2 */
+#define ATUR_PHY_VER_NUM_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 61, 0, 8, data,TxMessage)
+
+#define ATUR_SNRMGN_FLAG		0x8
+#if 0 /* [ Ritesh. Use PLAM 45 0 for 0.1dB resolution rather than INFO 68 3 */
+#define ATUR_SNRMGN_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 68, 4, 1, data,TxMessage)
+#else
+#define ATUR_SNRMGN_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, PLAM_SNRMargin_0_1db, 0, 1, data, TxMessage)
+#endif
+
+#define ATUR_ATTN_FLAG			0x10
+#define ATUR_ATTN_FLAG_MAKECMV		makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data,TxMessage)
+
+#define ATUR_CURR_STAT_FLAG		0x20	/* BIT 3 */
+
+#define ATUR_CURR_OUT_PWR_FLAG		0x40	/* BIT 4 */
+#define ATUR_CURR_OUT_PWR_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 69, 5, 1, data,TxMessage)
+
+#define ATUR_CURR_ATTR_FLAG		0x80	/* BIT 5 */
+#define ATUR_CURR_ATTR_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 68, 0, 2, data,TxMessage)
+
+/* adslAtucChanTable Flags */
+#define ATUC_CHAN_INTLV_DELAY_FLAG	0x1	/* BIT 0th position */
+//KD #define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, RATE, 3, 1, 1, data,TxMessage)
+#define ATUC_CHAN_INTLV_DELAY_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 92, 1, 1, data,TxMessage)
+
+#define ATUC_CHAN_CURR_TX_RATE_FLAG	0x2	/* BIT 1 */
+#define ATUC_CHAN_CURR_TX_RATE_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data,TxMessage)
+
+#define ATUC_CHAN_PREV_TX_RATE_FLAG	0x4	/* BIT 2 */
+
+/* adslAturChanTable Flags */
+#define ATUR_CHAN_INTLV_DELAY_FLAG	0x1	/* BIT 0th position */
+//KD #define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, RATE, 2, 1, 1, data,TxMessage)
+#define ATUR_CHAN_INTLV_DELAY_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 93, 1, 1, data,TxMessage)
+
+#define ATUR_CHAN_CURR_TX_RATE_FLAG	0x2	/* BIT 1 */
+#define ATUR_CHAN_CURR_TX_RATE_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data,TxMessage)
+
+#define ATUR_CHAN_PREV_TX_RATE_FLAG	0x4	/* BIT 2 */
+
+#define ATUR_CHAN_CRC_BLK_LEN_FLAG	0x8	/* BIT 3 */
+
+/* adslAtucPerfDataTable Flags */
+#define ATUC_PERF_LOFS_FLAG		0x1	/* BIT 0th position */
+#define ATUC_PERF_LOSS_FLAG		0x2	/* BIT 1 */
+#define ATUC_PERF_LO_FLAG_MAKECMV		makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data,TxMessage)
+#define ATUC_PERF_ESS_FLAG		0x4	/* BIT 2 */
+#define ATUC_PERF_ESS_FLAG_MAKECMV		makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data,TxMessage) 
+#define ATUC_PERF_INITS_FLAG	0x8	/* BIT 3 */
+#define ATUC_PERF_VALID_INTVLS_FLAG	0x10 /* BIT 4 */
+#define ATUC_PERF_INVALID_INTVLS_FLAG	0x20 /* BIT 5 */
+#define ATUC_PERF_CURR_15MIN_TIME_ELAPSED_FLAG	0x40 /* BIT 6 */
+#define ATUC_PERF_CURR_15MIN_LOFS_FLAG	 	0x80 	 /* BIT 7 */
+#define ATUC_PERF_CURR_15MIN_LOSS_FLAG		0x100 /* BIT 8 */
+#define ATUC_PERF_CURR_15MIN_ESS_FLAG		0x200	/* BIT 9 */
+#define ATUC_PERF_CURR_15MIN_INIT_FLAG		0x400 /* BIT 10 */
+#define ATUC_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
+#define ATUC_PERF_CURR_1DAY_LOFS_FLAG		0x1000 /* BIT 12 */
+#define ATUC_PERF_CURR_1DAY_LOSS_FLAG		0x2000 /* BIT 13 */
+#define ATUC_PERF_CURR_1DAY_ESS_FLAG		0x4000 /* BIT 14 */
+#define ATUC_PERF_CURR_1DAY_INIT_FLAG		0x8000 /* BIT 15 */
+#define ATUC_PERF_PREV_1DAY_MON_SEC_FLAG	0x10000 /* BIT 16 */
+#define ATUC_PERF_PREV_1DAY_LOFS_FLAG		0x20000 /* BIT 17 */
+#define ATUC_PERF_PREV_1DAY_LOSS_FLAG		0x40000 /* BIT 18 */
+#define ATUC_PERF_PREV_1DAY_ESS_FLAG		0x80000 /* BIT 19 */
+#define ATUC_PERF_PREV_1DAY_INITS_FLAG		0x100000 /* BIT 20 */
+
+/* adslAturPerfDataTable Flags */
+#define ATUR_PERF_LOFS_FLAG		0x1	/* BIT 0th position */
+#define ATUR_PERF_LOSS_FLAG		0x2	/* BIT 1 */
+#define ATUR_PERF_LPR_FLAG		0x4	/* BIT 2 */
+#define ATUR_PERF_LO_FLAG_MAKECMV		makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data,TxMessage)
+#define ATUR_PERF_ESS_FLAG		0x8	/* BIT 3 */
+#define ATUR_PERF_ESS_FLAG_MAKECMV		makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data,TxMessage)
+#define ATUR_PERF_VALID_INTVLS_FLAG	0x10 /* BIT 4 */
+#define ATUR_PERF_INVALID_INTVLS_FLAG	0x20 /* BIT 5 */
+#define ATUR_PERF_CURR_15MIN_TIME_ELAPSED_FLAG	0x40 /* BIT 6 */
+#define ATUR_PERF_CURR_15MIN_LOFS_FLAG	 	0x80 	 /* BIT 7 */
+#define ATUR_PERF_CURR_15MIN_LOSS_FLAG		0x100 /* BIT 8 */
+#define ATUR_PERF_CURR_15MIN_LPR_FLAG		0x200 /* BIT 9 */
+#define ATUR_PERF_CURR_15MIN_ESS_FLAG		0x400	/* BIT 10 */
+#define ATUR_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 	0x800 /* BIT 11 */
+#define ATUR_PERF_CURR_1DAY_LOFS_FLAG		0x1000 /* BIT 12 */
+#define ATUR_PERF_CURR_1DAY_LOSS_FLAG		0x2000 /* BIT 13 */
+#define ATUR_PERF_CURR_1DAY_LPR_FLAG		0x4000 /* BIT 14 */
+#define ATUR_PERF_CURR_1DAY_ESS_FLAG		0x8000 /* BIT 15 */
+#define ATUR_PERF_PREV_1DAY_MON_SEC_FLAG	0x10000 /* BIT 16 */
+#define ATUR_PERF_PREV_1DAY_LOFS_FLAG		0x20000 /* BIT 17 */
+#define ATUR_PERF_PREV_1DAY_LOSS_FLAG		0x40000 /* BIT 18 */
+#define ATUR_PERF_PREV_1DAY_LPR_FLAG		0x80000 /* BIT 19 */
+#define ATUR_PERF_PREV_1DAY_ESS_FLAG		0x100000 /* BIT 20 */
+
+/* adslAtucIntervalTable Flags */
+#define ATUC_INTVL_LOF_FLAG		0x1	/* BIT 0th position */
+#define ATUC_INTVL_LOS_FLAG		0x2 	/* BIT 1 */
+#define ATUC_INTVL_ESS_FLAG		0x4	/* BIT 2 */
+#define ATUC_INTVL_INIT_FLAG		0x8   /* BIT 3 */
+#define ATUC_INTVL_VALID_DATA_FLAG 	0x10 /* BIT 4 */
+
+/* adslAturIntervalTable Flags */
+#define ATUR_INTVL_LOF_FLAG		0x1	/* BIT 0th position */
+#define ATUR_INTVL_LOS_FLAG		0x2 	/* BIT 1 */
+#define ATUR_INTVL_LPR_FLAG		0x4 	/* BIT 2 */
+#define ATUR_INTVL_ESS_FLAG		0x8	/* BIT 3 */
+#define ATUR_INTVL_VALID_DATA_FLAG 	0x10 /* BIT 4 */
+
+/* adslAtucChanPerfDataTable Flags */
+#define ATUC_CHAN_RECV_BLK_FLAG	0x01	/* BIT 0th position */
+#define ATUC_CHAN_TX_BLK_FLAG	0x02	/* BIT 1 */
+#define ATUC_CHAN_CORR_BLK_FLAG	0x04	/* BIT 2 */
+#define ATUC_CHAN_UNCORR_BLK_FLAG 0x08	/* BIT 3 */
+#define ATUC_CHAN_PERF_VALID_INTVL_FLAG 0x10 /* BIT 4 */
+#define ATUC_CHAN_PERF_INVALID_INTVL_FLAG 0x20 /* BIT 5 */
+#define ATUC_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUC_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG	0x80 /* BIT 7 */
+#define ATUC_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG 0x100 /* BIT 8 */
+#define ATUC_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG 0x200 /* BIT 9 */
+#define ATUC_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG 0x400 /* BIT 10 */
+#define ATUC_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11*/
+#define ATUC_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG 0x1000 /* BIT 12 */
+#define ATUC_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG 0x2000 /* BIT 13 */
+#define ATUC_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG 0x4000 /* BIT 14 */
+#define ATUC_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG 0x8000 /* BIT 15 */
+#define ATUC_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG 0x10000 /* BIT 16 */
+#define ATUC_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG 0x20000 /* BIT 17 */
+#define ATUC_CHAN_PERF_PREV_1DAY_TX_BLK_FLAG 0x40000 /* BIT 18 */
+#define ATUC_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG 0x80000 /* BIT 19 */
+#define ATUC_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG 0x100000 /* BIT 20 */
+
+
+/* adslAturChanPerfDataTable Flags */
+#define ATUR_CHAN_RECV_BLK_FLAG   0x01 	/* BIT 0th position */ 
+#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_LSW		makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage)
+#define ATUR_CHAN_RECV_BLK_FLAG_MAKECMV_MSW		makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage)
+#define ATUR_CHAN_TX_BLK_FLAG     0x02 	/* BIT 1 */
+#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_LSW		makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data,TxMessage)
+#define ATUR_CHAN_TX_BLK_FLAG_MAKECMV_MSW		makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data,TxMessage)
+#define ATUR_CHAN_CORR_BLK_FLAG   0x04 	/* BIT 2 */
+#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_INTL		makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data,TxMessage)
+#define ATUR_CHAN_CORR_BLK_FLAG_MAKECMV_FAST		makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data,TxMessage)
+#define ATUR_CHAN_UNCORR_BLK_FLAG 0x08		/* BIT 3 */
+#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_INTL		makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data,TxMessage)
+#define ATUR_CHAN_UNCORR_BLK_FLAG_MAKECMV_FAST		makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data,TxMessage)
+#define ATUR_CHAN_PERF_VALID_INTVL_FLAG   0x10 	/* BIT 4 */
+#define ATUR_CHAN_PERF_INVALID_INTVL_FLAG 0x20 	/* BIT 5 */
+#define ATUR_CHAN_PERF_CURR_15MIN_TIME_ELAPSED_FLAG 0x40 /* BIT 6 */
+#define ATUR_CHAN_PERF_CURR_15MIN_RECV_BLK_FLAG    0x80   /* BIT 7 */
+#define ATUR_CHAN_PERF_CURR_15MIN_TX_BLK_FLAG      0x100 /* BIT 8 */
+#define ATUR_CHAN_PERF_CURR_15MIN_CORR_BLK_FLAG    0x200 /* BIT 9 */
+#define ATUR_CHAN_PERF_CURR_15MIN_UNCORR_BLK_FLAG  0x400 /* BIT 10 */
+#define ATUR_CHAN_PERF_CURR_1DAY_TIME_ELAPSED_FLAG 0x800 /* BIT 11 */
+#define ATUR_CHAN_PERF_CURR_1DAY_RECV_BLK_FLAG     0x1000 /* BIT 12 */
+#define ATUR_CHAN_PERF_CURR_1DAY_TX_BLK_FLAG       0x2000 /* BIT 13 */
+#define ATUR_CHAN_PERF_CURR_1DAY_CORR_BLK_FLAG     0x4000 /* BIT 14 */
+#define ATUR_CHAN_PERF_CURR_1DAY_UNCORR_BLK_FLAG   0x8000 /* BIT 15 */
+#define ATUR_CHAN_PERF_PREV_1DAY_MONI_SEC_FLAG     0x10000 /* BIT 16 */
+#define ATUR_CHAN_PERF_PREV_1DAY_RECV_BLK_FLAG     0x20000 /* BIT 17 */
+#define ATUR_CHAN_PERF_PREV_1DAY_TRANS_BLK_FLAG    0x40000 /* BIT 18 */
+#define ATUR_CHAN_PERF_PREV_1DAY_CORR_BLK_FLAG     0x80000 /* BIT 19 */
+#define ATUR_CHAN_PERF_PREV_1DAY_UNCORR_BLK_FLAG   0x100000 /* BIT 20 */
+
+/* adslAtucChanIntervalTable Flags */
+#define ATUC_CHAN_INTVL_NUM_FLAG   	     	0x1 	/* BIT 0th position */
+#define ATUC_CHAN_INTVL_RECV_BLK_FLAG  		0x2 	/* BIT 1 */
+#define ATUC_CHAN_INTVL_TX_BLK_FLAG  		0x4	/* BIT 2 */
+#define ATUC_CHAN_INTVL_CORR_BLK_FLAG   	0x8 	/* BIT 3 */
+#define ATUC_CHAN_INTVL_UNCORR_BLK_FLAG   	0x10 	/* BIT 4 */
+#define ATUC_CHAN_INTVL_VALID_DATA_FLAG 	0x20 	/* BIT 5 */
+
+/* adslAturChanIntervalTable Flags */
+#define ATUR_CHAN_INTVL_NUM_FLAG   	     	0x1 	/* BIT 0th Position */
+#define ATUR_CHAN_INTVL_RECV_BLK_FLAG  		0x2 	/* BIT 1 */
+#define ATUR_CHAN_INTVL_TX_BLK_FLAG  		0x4	/* BIT 2 */
+#define ATUR_CHAN_INTVL_CORR_BLK_FLAG   	0x8 	/* BIT 3 */
+#define ATUR_CHAN_INTVL_UNCORR_BLK_FLAG   	0x10 	/* BIT 4 */
+#define ATUR_CHAN_INTVL_VALID_DATA_FLAG 	0x20 	/* BIT 5 */
+
+/* adslLineAlarmConfProfileTable Flags */
+#define ATUC_THRESH_15MIN_LOFS_FLAG   		0x01   /* BIT 0th position */
+#define ATUC_THRESH_15MIN_LOSS_FLAG   		0x02   /* BIT 1 */
+#define ATUC_THRESH_15MIN_ESS_FLAG      	0x04   /* BIT 2 */
+#define ATUC_THRESH_FAST_RATEUP_FLAG     	0x08   /* BIT 3 */
+#define ATUC_THRESH_INTERLEAVE_RATEUP_FLAG	0x10   /* BIT 4 */
+#define ATUC_THRESH_FAST_RATEDOWN_FLAG		0x20	 /* BIT 5 */
+#define ATUC_THRESH_INTERLEAVE_RATEDOWN_FLAG   	0x40	/* BIT 6 */
+#define ATUC_INIT_FAILURE_TRAP_ENABLE_FLAG	0x80 	/* BIT 7 */
+#define ATUR_THRESH_15MIN_LOFS_FLAG   		0x100  	/* BIT 8 */
+#define ATUR_THRESH_15MIN_LOSS_FLAG   		0x200  	/* BIT 9 */
+#define ATUR_THRESH_15MIN_LPRS_FLAG    		0x400  	/* BIT 10 */
+#define ATUR_THRESH_15MIN_ESS_FLAG      	0x800   	/* BIT 11 */
+#define ATUR_THRESH_FAST_RATEUP_FLAG     	0x1000  	/* BIT 12 */
+#define ATUR_THRESH_INTERLEAVE_RATEUP_FLAG	0x2000  	/* BIT 13 */
+#define ATUR_THRESH_FAST_RATEDOWN_FLAG     	0x4000 	/* BIT 14 */
+#define ATUR_THRESH_INTERLEAVE_RATEDOWN_FLAG	0x8000   	/* BIT 15 */
+#define LINE_ALARM_CONF_PROFILE_ROWSTATUS_FLAG  0x10000   	/* BIT 16 */
+
+
+/* adslAturTraps Flags */
+#define ATUC_PERF_LOFS_THRESH_FLAG   	     	0x1 	/* BIT 0th position */
+#define ATUC_PERF_LOSS_THRESH_FLAG  	 	0x2 	/* BIT 1 */
+#define ATUC_PERF_ESS_THRESH_FLAG  	 	0x4 	/* BIT 2 */
+#define ATUC_RATE_CHANGE_FLAG	  	 	0x8 	/* BIT 3 */
+#define ATUR_PERF_LOFS_THRESH_FLAG   	     	0x10 	/* BIT 4 */
+#define ATUR_PERF_LOSS_THRESH_FLAG  	 	0x20 	/* BIT 5 */
+#define ATUR_PERF_LPRS_THRESH_FLAG  	 	0x40 	/* BIT 6 */
+#define ATUR_PERF_ESS_THRESH_FLAG  	 	0x80 	/* BIT 7 */
+#define ATUR_RATE_CHANGE_FLAG	  	 	0x100	/* BIT 8 */
+
+//RFC- 3440 FLAG DEFINITIONS
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+/* adslLineExtTable flags */
+#define ATUC_LINE_TRANS_CAP_FLAG	 	0x1		/* BIT 0th position */
+#define ATUC_LINE_TRANS_CAP_FLAG_MAKECMV	makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage)
+#define ATUC_LINE_TRANS_CONFIG_FLAG	 	0x2		/* BIT 1 */
+#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV	makeCMV(H2D_CMV_READ,INFO, 67, 0, 1, data,TxMessage)
+#define ATUC_LINE_TRANS_CONFIG_FLAG_MAKECMV_WR	makeCMV(H2D_CMV_WRITE,INFO, 67, 0, 1, data,TxMessage)
+#define ATUC_LINE_TRANS_ACTUAL_FLAG	 	0x4		/* BIT 2 */
+#define ATUC_LINE_TRANS_ACTUAL_FLAG_MAKECMV	makeCMV(H2D_CMV_READ,STAT, 1, 0, 1, data,TxMessage)
+#define LINE_GLITE_POWER_STATE_FLAG 	 	0x8		/* BIT 3 */
+#define LINE_GLITE_POWER_STATE_FLAG_MAKECMV	makeCMV(H2D_CMV_READ,STAT, 0, 0, 1, data,TxMessage) 
+
+/* adslAtucPerfDataExtTable flags */
+#define ATUC_PERF_STAT_FASTR_FLAG	   0x1 /* BIT 0th position */
+#define ATUC_PERF_STAT_FASTR_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
+#define ATUC_PERF_STAT_FAILED_FASTR_FLAG 0x2 /* BIT 1 */
+#define ATUC_PERF_STAT_FAILED_FASTR_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
+#define ATUC_PERF_STAT_SESL_FLAG 	   0X4	/* BIT 2 */
+#define ATUC_PERF_STAT_SESL_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage)
+#define ATUC_PERF_STAT_UASL_FLAG		   0X8	/* BIT 3 */
+#define ATUC_PERF_STAT_UASL_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage)
+#define ATUC_PERF_CURR_15MIN_FASTR_FLAG	   0X10	/* BIT 4 */
+#define ATUC_PERF_CURR_15MIN_FAILED_FASTR_FLAG 0X20	/* BIT 5 */
+#define ATUC_PERF_CURR_15MIN_SESL_FLAG	         0X40	/* BIT 6 */
+#define ATUC_PERF_CURR_15MIN_UASL_FLAG		    0X80	/* BIT 7 */
+#define ATUC_PERF_CURR_1DAY_FASTR_FLAG		    0X100	/* BIT 8 */
+#define ATUC_PERF_CURR_1DAY_FAILED_FASTR_FLAG	0X200	/* BIT 9 */
+#define ATUC_PERF_CURR_1DAY_SESL_FLAG			0X400	/* BIT 10 */
+#define ATUC_PERF_CURR_1DAY_UASL_FLAG			0X800	/* BIT 11 */
+#define ATUC_PERF_PREV_1DAY_FASTR_FLAG		     0X1000 /* BIT 12 */
+#define ATUC_PERF_PREV_1DAY_FAILED_FASTR_FLAG	0X2000 /* BIT 13 */
+#define ATUC_PERF_PREV_1DAY_SESL_FLAG			0X4000 /* BIT 14 */
+#define ATUC_PERF_PREV_1DAY_UASL_FLAG			0X8000 /* BIT 15 */
+
+/* adslAturPerfDataExtTable */
+#define ATUR_PERF_STAT_SESL_FLAG		0X1 /* BIT 0th position */
+#define ATUR_PERF_STAT_SESL_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage)	
+#define ATUR_PERF_STAT_UASL_FLAG		0X2 /* BIT 1 */
+#define ATUR_PERF_STAT_UASL_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage)
+#define ATUR_PERF_CURR_15MIN_SESL_FLAG		0X4 /* BIT 2 */
+#define ATUR_PERF_CURR_15MIN_UASL_FLAG		0X8 /* BIT 3 */
+#define ATUR_PERF_CURR_1DAY_SESL_FLAG		0X10 /* BIT 4 */
+#define ATUR_PERF_CURR_1DAY_UASL_FLAG		0X20 /* BIT 5 */
+#define ATUR_PERF_PREV_1DAY_SESL_FLAG		0X40 /* BIT 6 */
+#define ATUR_PERF_PREV_1DAY_UASL_FLAG		0X80 /* BIT 7 */
+
+/* adslAutcIntervalExtTable flags */
+#define ATUC_INTERVAL_FASTR_FLAG		0x1 /* Bit 0 */ 	
+#define ATUC_INTERVAL_FAILED_FASTR_FLAG		0x2 /* Bit 1 */ 	
+#define ATUC_INTERVAL_SESL_FLAG			0x4 /* Bit 2 */ 	
+#define ATUC_INTERVAL_UASL_FLAG			0x8 /* Bit 3 */ 	
+
+/* adslAturIntervalExtTable */
+#define ATUR_INTERVAL_SESL_FLAG		0X1 /* BIT 0th position */
+#define ATUR_INTERVAL_UASL_FLAG		0X2 /* BIT 1 */
+
+/* adslAlarmConfProfileExtTable */
+#define ATUC_THRESH_15MIN_FAILED_FASTR_FLAG 0X1/* BIT 0th position */
+#define ATUC_THRESH_15MIN_SESL_FLAG		 0X2 /* BIT 1 */
+#define ATUC_THRESH_15MIN_UASL_FLAG		 0X4 /* BIT 2 */
+#define ATUR_THRESH_15MIN_SESL_FLAG		 0X8 /* BIT 3 */
+#define ATUR_THRESH_15MIN_UASL_FLAG		 0X10 /* BIT 4 */
+
+/* adslAturExtTraps */
+#define ATUC_15MIN_FAILED_FASTR_TRAP_FLAG 	0X1 /* BIT 0th position */
+#define ATUC_15MIN_SESL_TRAP_FLAG		 0X2 /* BIT 1 */
+#define ATUC_15MIN_UASL_TRAP_FLAG		 0X4 /* BIT 2 */
+#define ATUR_15MIN_SESL_TRAP_FLAG		 0X8 /* BIT 3 */
+#define ATUR_15MIN_UASL_TRAP_FLAG		 0X10 /* BIT 4 */
+
+#endif
+
+/* adslLineStatus Flags */
+#define LINE_STAT_MODEM_STATUS_FLAG   	 0x1 /* BIT 0th position */
+#define LINE_STAT_MODEM_STATUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 0, 0, 1, data, TxMessage)
+#define LINE_STAT_MODE_SEL_FLAG  	 0x2 /* BIT 1 */
+#define LINE_STAT_MODE_SEL_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 1, 0, 1, data, TxMessage)
+#define LINE_STAT_TRELLCOD_ENABLE_FLAG 0x4 /* BIT 2 */
+#define LINE_STAT_TRELLCOD_ENABLE_FLAG_MAKECMV makeCMV(H2D_CMV_READ, OPTN, 2, 0, 1, data, TxMessage)
+#define LINE_STAT_LATENCY_FLAG	  	 0x8 /* BIT 3 */
+#define LINE_STAT_LATENCY_FLAG_MAKECMV makeCMV(H2D_CMV_READ, STAT, 12, 0, 1, data, TxMessage)
+
+/* adslLineRate Flags */
+#define LINE_RATE_DATA_RATEDS_FLAG   	0x1 /* BIT 0th position */
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 0, 2, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 1, 2, 2, data, TxMessage)
+
+
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 0, 2, data, TxMessage)
+
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 12, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 13, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 14, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 15, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEDS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 17, 2, 2, data, TxMessage)
+
+#define LINE_RATE_DATA_RATEUS_FLAG  	0x2 /* BIT 1 */
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP0_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 0, 2, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL1_LP1_MAKECMV makeCMV(H2D_CMV_READ, RATE, 0, 2, 2, data, TxMessage)
+
+
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 0, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP0_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 0, 2, data, TxMessage)
+
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_RP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 23, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_MP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 24, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_LP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 25, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_TP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 26, 1, 1, data, TxMessage)
+#define LINE_RATE_DATA_RATEUS_FLAG_ADSL2_KP_LP1_MAKECMV makeCMV(H2D_CMV_READ, CNFG, 28, 2, 2, data, TxMessage)
+
+#define LINE_RATE_ATTNDRDS_FLAG  	0x4 /* BIT 2 */
+#define LINE_RATE_ATTNDRDS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 68, 4, 2, data, TxMessage)
+
+#define LINE_RATE_ATTNDRUS_FLAG	  	0x8 /* BIT 3 */
+#define LINE_RATE_ATTNDRUS_FLAG_MAKECMV makeCMV(H2D_CMV_READ, INFO, 69, 4, 2, data, TxMessage)
+
+/* adslLineInformation Flags */
+#define LINE_INFO_INTLV_DEPTHDS_FLAG	0x1 /* BIT 0th position */
+#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP0_MAKECMV	makeCMV(H2D_CMV_READ, CNFG, 27, 0, 1, data, TxMessage)
+#define LINE_INFO_INTLV_DEPTHDS_FLAG_LP1_MAKECMV	makeCMV(H2D_CMV_READ, CNFG, 27, 1, 1, data, TxMessage)
+#define LINE_INFO_INTLV_DEPTHUS_FLAG	0x2 /* BIT 1 */
+#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP0_MAKECMV	makeCMV(H2D_CMV_READ, CNFG, 16, 0, 1, data, TxMessage)
+#define LINE_INFO_INTLV_DEPTHUS_FLAG_LP1_MAKECMV	makeCMV(H2D_CMV_READ, CNFG, 16, 1, 1, data, TxMessage)
+#define LINE_INFO_LATNDS_FLAG		0x4 /* BIT 2 */
+#define LINE_INFO_LATNDS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 68, 1, 1, data, TxMessage)
+#define LINE_INFO_LATNUS_FLAG	  	0x8 /* BIT 3 */
+#define LINE_INFO_LATNUS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 69, 1, 1, data, TxMessage)
+#define LINE_INFO_SATNDS_FLAG   	 	0x10 /* BIT 4 */
+#define LINE_INFO_SATNDS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 68, 2, 1, data, TxMessage)
+#define LINE_INFO_SATNUS_FLAG  	 	0x20 /* BIT 5 */
+#define LINE_INFO_SATNUS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 69, 2, 1, data, TxMessage)
+#define LINE_INFO_SNRMNDS_FLAG  	 	0x40 /* BIT 6 */
+#define LINE_INFO_SNRMNDS_FLAG_ADSL1_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 68, 3, 1, data, TxMessage)
+#define LINE_INFO_SNRMNDS_FLAG_ADSL2_MAKECMV	makeCMV(H2D_CMV_READ, RATE, 3, 0, 1, data, TxMessage)
+#define LINE_INFO_SNRMNDS_FLAG_ADSL2PLUS_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 46, 0, 1, data, TxMessage)
+#define LINE_INFO_SNRMNUS_FLAG  	 	0x80 /* BIT 7 */
+#define LINE_INFO_SNRMNUS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 69, 3, 1, data, TxMessage)
+#define LINE_INFO_ACATPDS_FLAG	  	0x100 /* BIT 8 */
+#define LINE_INFO_ACATPDS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 68, 6, 1, data, TxMessage)
+#define LINE_INFO_ACATPUS_FLAG	  	0x200 /* BIT 9 */
+#define LINE_INFO_ACATPUS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 69, 6, 1, data, TxMessage)
+
+/* adslNearEndPerformanceStats Flags */
+#define NEAREND_PERF_SUPERFRAME_FLAG_LSW_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 20, 0, 1, data, TxMessage)
+#define NEAREND_PERF_SUPERFRAME_FLAG_MSW_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 21, 0, 1, data, TxMessage)
+#define NEAREND_PERF_SUPERFRAME_FLAG	0x1 /* BIT 0th position */
+#define NEAREND_PERF_LOS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 0, 0, 1, data, TxMessage)
+#define NEAREND_PERF_LOS_FLAG		0x2 /* BIT 1 */
+#define NEAREND_PERF_LOF_FLAG		0x4 /* BIT 2 */
+#define NEAREND_PERF_LPR_FLAG		0x8 /* BIT 3 */
+#define NEAREND_PERF_NCD_FLAG		0x10 /* BIT 4 */
+#define NEAREND_PERF_LCD_FLAG		0x20 /* BIT 5 */
+#define NEAREND_PERF_CRC_FLAG		0x40 /* BIT 6 */
+#define NEAREND_PERF_CRC_FLAG_LP0_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 2, 0, 1, data, TxMessage)
+#define NEAREND_PERF_CRC_FLAG_LP1_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 2, 1, 1, data, TxMessage)
+#define NEAREND_PERF_RSCORR_FLAG_LP0_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 3, 0, 1, data, TxMessage)
+#define NEAREND_PERF_RSCORR_FLAG_LP1_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 3, 1, 1, data, TxMessage)
+#define NEAREND_PERF_RSCORR_FLAG	0x80 /* BIT 7 */
+#define NEAREND_PERF_FECS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 6, 0, 1, data, TxMessage)
+#define NEAREND_PERF_FECS_FLAG		0x100 /* BIT 8 */
+#define NEAREND_PERF_ES_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 7, 0, 1, data, TxMessage)
+#define NEAREND_PERF_ES_FLAG		0x200 /* BIT 9 */
+#define NEAREND_PERF_SES_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 8, 0, 1, data, TxMessage)
+#define NEAREND_PERF_SES_FLAG		0x400 /* BIT 10 */
+#define NEAREND_PERF_LOSS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 9, 0, 1, data, TxMessage)
+#define NEAREND_PERF_LOSS_FLAG		0x800 /* BIT 11 */
+#define NEAREND_PERF_UAS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 10, 0, 1, data, TxMessage)
+#define NEAREND_PERF_UAS_FLAG		0x1000 /* BIT 12 */
+#define NEAREND_PERF_HECERR_FLAG_BC0_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 11, 0, 2, data, TxMessage)
+#define NEAREND_PERF_HECERR_FLAG_BC1_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 11, 2, 2, data, TxMessage)
+#define NEAREND_PERF_HECERR_FLAG		0x2000 /* BIT 13 */
+
+/* adslFarEndPerformanceStats Flags */
+#define FAREND_PERF_LOS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 1, 0, 1, data, TxMessage)
+#define FAREND_PERF_LOS_FLAG	0x1 /* BIT 0th position */
+#define FAREND_PERF_LOF_FLAG	0x2 /* BIT 1 */
+#define FAREND_PERF_LPR_FLAG	0x4 /* BIT 2 */
+#define FAREND_PERF_NCD_FLAG	0x8 /* BIT 3 */
+#define FAREND_PERF_LCD_FLAG	0x10 /* BIT 4 */
+#define FAREND_PERF_CRC_FLAG_LP0_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 24, 0, 1, data, TxMessage)
+#define FAREND_PERF_CRC_FLAG_LP1_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 24, 1, 1, data, TxMessage)
+#define FAREND_PERF_CRC_FLAG	0x20 /* BIT 5 */
+#define FAREND_PERF_RSCORR_FLAG_LP0_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 28, 0, 1, data, TxMessage)
+#define FAREND_PERF_RSCORR_FLAG_LP1_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 28, 1, 1, data, TxMessage)
+#define FAREND_PERF_RSCORR_FLAG	0x40 /* BIT 6 */
+#define FAREND_PERF_FECS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 32, 0, 1, data, TxMessage)
+#define FAREND_PERF_FECS_FLAG	0x80 /* BIT 7 */
+#define FAREND_PERF_ES_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 33, 0, 1, data, TxMessage)
+#define FAREND_PERF_ES_FLAG	0x100 /* BIT 8 */
+#define FAREND_PERF_SES_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 34, 0, 1, data, TxMessage)
+#define FAREND_PERF_SES_FLAG	0x200 /* BIT 9 */
+#define FAREND_PERF_LOSS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 35, 0, 1, data, TxMessage)
+#define FAREND_PERF_LOSS_FLAG	0x400 /* BIT 10 */
+#define FAREND_PERF_UAS_FLAG_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 36, 0, 1, data, TxMessage)
+#define FAREND_PERF_UAS_FLAG	0x800 /* BIT 11 */
+#define FAREND_PERF_HECERR_FLAG_BC0_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 37, 0, 2, data, TxMessage)
+#define FAREND_PERF_HECERR_FLAG_BC1_MAKECMV	makeCMV(H2D_CMV_READ, PLAM, 37, 2, 2, data, TxMessage)
+#define FAREND_PERF_HECERR_FLAG	0x1000 /* BIT 12 */
+// 603221:tc.chen end
+/* TR-69 related additional parameters - defines */
+/* Defines for  struct adslATURSubcarrierInfo */
+#define	NEAREND_HLINSC	0x1
+#define NEAREND_HLINSC_MAKECMV(mode)		makeCMV(mode, INFO, 71, 2, 1, data, TxMessage)
+#define	NEAREND_HLINPS	0x2
+#define NEAREND_HLINPS_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 73, idx, size, data, TxMessage)
+#define	NEAREND_HLOGMT	0x4
+#define NEAREND_HLOGMT_MAKECMV(mode)		makeCMV(mode, INFO, 80, 0, 1, data, TxMessage)
+#define NEAREND_HLOGPS	0x8
+#define NEAREND_HLOGPS_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 75, idx, size, data, TxMessage)
+#define NEAREND_QLNMT	0x10
+#define NEAREND_QLNMT_MAKECMV(mode)		makeCMV(mode, INFO, 80, 1, 1, data, TxMessage)
+#define	NEAREND_QLNPS	0x20
+#define NEAREND_QLNPS_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 77, idx, size, data, TxMessage)
+#define	NEAREND_SNRMT	0x40
+#define NEAREND_SNRMT_MAKECMV(mode)		makeCMV(mode, INFO, 80, 2, 1, data, TxMessage)
+#define	NEAREND_SNRPS	0x80
+#define NEAREND_SNRPS_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 78, idx, size, data, TxMessage)
+#define	NEAREND_BITPS	0x100
+#define NEAREND_BITPS_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 22, idx, size, data, TxMessage)
+#define	NEAREND_GAINPS	0x200
+#define NEAREND_GAINPS_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 24, idx, size, data, TxMessage)
+
+/* Defines for  struct adslATUCSubcarrierInfo */
+#define	 FAREND_HLINSC	0x1
+
+/* As per the feedback from Knut on 21/08/2006, the cmv command of HLINSC should be INFO 70 2 */
+#define  FAREND_HLINSC_MAKECMV(mode)		makeCMV(mode, INFO, 70, 2, 1, data, TxMessage)
+#define	 FAREND_HLINPS	0x2
+#define  FAREND_HLINPS_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 72, idx, size, data, TxMessage)
+#define	 FAREND_HLOGMT	0x4
+#define  FAREND_HLOGMT_MAKECMV(mode)		makeCMV(mode, INFO, 79, 0, 1, data, TxMessage)
+#define  FAREND_HLOGPS	0x8
+#define  FAREND_HLOGPS_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 74, idx, size, data, TxMessage)
+#define  FAREND_QLNMT	0x10
+#define  FAREND_QLNMT_MAKECMV(mode)		makeCMV(mode, INFO, 79, 1, 1, data, TxMessage)
+#define	 FAREND_QLNPS	0x20
+#define  FAREND_QLNPS_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 76, idx, size, data, TxMessage)
+#define	 FAREND_SNRMT	0x40
+#define  FAREND_SNRMT_MAKECMV(mode)		makeCMV(mode, INFO, 79, 2, 1, data, TxMessage)
+#define	 FAREND_SNRPS	0x80
+#define  FAREND_SNRPS_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 11, idx, size, data, TxMessage)
+#define  FAREND_SNRPS_DIAG_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 10, idx, size, data, TxMessage)
+#define	 FAREND_BITPS	0x100
+#define  FAREND_BITPS_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 23, idx, size, data, TxMessage)
+#define	 FAREND_GAINPS	0x200
+#define  FAREND_GAINPS_MAKECMV(mode,idx,size)	makeCMV(mode, INFO, 25, idx, size, data, TxMessage)
+
+
+// GET_ADSL_POWER_SPECTRAL_DENSITY
+#define NOMPSD_US_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 102, 0, 1, data, TxMessage)
+#define NOMPSD_DS_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 102, 1, 1, data, TxMessage)
+#define PCB_US_MAKECMV		makeCMV(H2D_CMV_READ, INFO, 102, 6, 1, data, TxMessage)
+#define PCB_DS_MAKECMV		makeCMV(H2D_CMV_READ, INFO, 102, 7, 1, data, TxMessage)
+#define	RMSGI_US_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 102, 10, 1, data, TxMessage)
+#define	RMSGI_DS_MAKECMV	makeCMV(H2D_CMV_READ, INFO, 102, 11, 1, data, TxMessage)
+
+/////////////////////////////////////////////////Macro Definitions ? FLAG Setting & Testing
+
+#define SET_FLAG(flags, flag_val)   ((*flags) = ((*flags) | flag_val))
+//	-- This macro sets the flags with the flag_val. Here flags is passed as a pointer
+
+#define IS_FLAG_SET(flags, test_flag)	(((*flags) & (test_flag)) == (test_flag)? test_flag:0)
+// 	-- This macro verifies whether test_flag has been set in flags. Here flags is passed as a pointer
+
+
+#define CLR_FLAG(flags, flag_bit)	((*flags) = (*flags) & (~flag_bit))
+//	-- This macro resets the specified flag_bit in the flags. Here flags is passed as a pointer
+
+
+////////////////////////////////////////////////DATA STRUCTURES ORGANIZATION
+	
+//Here are the data structures used for accessing mib parameters. The ioctl call includes the third parameter as a void pointer. This parameter has to be type-casted in the driver code to the corresponding structure depending upon the command type. For Ex: consider the ioctl used to get the adslLineCode type, ioctl(fd,GET_ADSL_LINE_CODE,void *struct_adslLineTableEntry). In the driver code we check on the type of the command, i.e GET_ADSL_LINE_CODE and type-cast the void pointer to struct adslLineTableEntry type.
+	//
+#define u32 unsigned int
+#define u16 unsigned short
+#define s16 short
+#define u8 unsigned char
+
+
+typedef u32 AdslPerfTimeElapsed;
+typedef u32 AdslPerfPrevDayCount;
+typedef u32 PerfCurrentCount;
+typedef u32 PerfIntervalCount;
+typedef u32 AdslPerfCurrDayCount;
+
+
+//ioctl(int fd, GET_ADSL_LINE_CODE, void *struct_adslLineTableEntry)
+
+typedef struct adslLineTableEntry {
+	int ifIndex;
+	int adslLineCode;
+	u8 flags;
+} adslLineTableEntry;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct adslLineExtTableEntry {
+	int ifIndex;
+	u16 adslLineTransAtucCap;
+	u16 adslLineTransAtucConfig;
+	u16 adslLineTransAtucActual;
+	int adslLineGlitePowerState;
+	u32 flags;
+}adslLineExtTableEntry;
+#endif
+//ioctl(int fd, GET_ADSL_ATUC_PHY, void  *struct_adslAtucPhysEntry)
+#ifndef u_char 
+#define u_char u8
+#endif
+
+typedef struct adslVendorId {
+	u16	country_code;
+	u_char	provider_id[4];  /* Ascii characters */
+	u_char	revision_info[2];
+}adslVendorId;
+
+typedef struct adslAtucPhysEntry {
+	int ifIndex;
+	char serial_no[32];
+	union {
+	char vendor_id[16];
+		adslVendorId vendor_info;
+	} vendor_id;
+	char version_no[16];
+	u32 status;
+	int outputPwr;
+	u32 attainableRate;
+	u8 flags;
+} adslAtucPhysEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_PHY, void  *struct_adslAturPhysEntry)
+
+typedef struct adslAturPhysEntry {
+	int ifIndex;
+	char serial_no[32];
+	union {
+	char vendor_id[16];
+		adslVendorId vendor_info;
+	} vendor_id;
+	char version_no[16];
+	int SnrMgn;
+	u32 Attn;
+	u32 status;
+	int outputPwr;
+	u32 attainableRate;
+	u8 flags;
+} adslAturPhysEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUC_CHAN_INFO, void *struct_adslAtucChanInfo)
+
+typedef struct adslAtucChanInfo {
+	int ifIndex;
+ 	u32 interleaveDelay;
+	u32 currTxRate;
+	u32 prevTxRate;
+	u8 flags;
+} adslAtucChanInfo;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_CHAN_INFO, void *struct_adslAturChanInfo)
+
+typedef struct adslAturChanInfo {
+	int ifIndex;
+ 	u32 interleaveDelay;
+ 	u32 currTxRate;
+ 	u32 prevTxRate;
+ 	u32 crcBlkLen;
+ 	u8 flags;
+} adslAturChanInfo;
+
+
+//ioctl(int fd, GET_ADSL_ATUC_PERF_DATA,  void *struct_atucPerfDataEntry)
+
+typedef struct atucPerfDataEntry
+{
+   int			ifIndex;
+   u32 			adslAtucPerfLofs;             
+   u32 			adslAtucPerfLoss;             
+   u32 			adslAtucPerfESs;                 
+   u32 			adslAtucPerfInits;
+   int         		adslAtucPerfValidIntervals;
+   int         		adslAtucPerfInvalidIntervals;
+   AdslPerfTimeElapsed 	adslAtucPerfCurr15MinTimeElapsed;
+   PerfCurrentCount 	adslAtucPerfCurr15MinLofs;
+   PerfCurrentCount 	adslAtucPerfCurr15MinLoss;
+   PerfCurrentCount 	adslAtucPerfCurr15MinESs;
+   PerfCurrentCount 	adslAtucPerfCurr15MinInits;
+   AdslPerfTimeElapsed 	adslAtucPerfCurr1DayTimeElapsed;
+   AdslPerfCurrDayCount adslAtucPerfCurr1DayLofs;
+   AdslPerfCurrDayCount adslAtucPerfCurr1DayLoss;
+   AdslPerfCurrDayCount adslAtucPerfCurr1DayESs;
+   AdslPerfCurrDayCount adslAtucPerfCurr1DayInits;
+   int         		adslAtucPerfPrev1DayMoniSecs;
+   AdslPerfPrevDayCount adslAtucPerfPrev1DayLofs;
+   AdslPerfPrevDayCount adslAtucPerfPrev1DayLoss;
+   AdslPerfPrevDayCount adslAtucPerfPrev1DayESs;
+   AdslPerfPrevDayCount adslAtucPerfPrev1DayInits;
+   u32			flags;
+} atucPerfDataEntry;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct atucPerfDataExtEntry
+ {
+  int ifIndex;
+  u32 adslAtucPerfStatFastR;
+  u32 adslAtucPerfStatFailedFastR;
+  u32 adslAtucPerfStatSesL;
+  u32 adslAtucPerfStatUasL;
+  u32 adslAtucPerfCurr15MinFastR;
+  u32 adslAtucPerfCurr15MinFailedFastR;
+  u32 adslAtucPerfCurr15MinSesL;
+  u32 adslAtucPerfCurr15MinUasL;
+  u32 adslAtucPerfCurr1DayFastR;
+  u32 adslAtucPerfCurr1DayFailedFastR;
+  u32 adslAtucPerfCurr1DaySesL;
+  u32 adslAtucPerfCurr1DayUasL;
+  u32 adslAtucPerfPrev1DayFastR;
+  u32 adslAtucPerfPrev1DayFailedFastR;
+  u32 adslAtucPerfPrev1DaySesL;
+  u32 adslAtucPerfPrev1DayUasL;
+  u32	flags;
+} atucPerfDataExtEntry; 
+
+#endif
+//ioctl(int fd, GET_ADSL_ATUR_PERF_DATA, void *struct_aturPerfDataEntry)
+
+typedef struct aturPerfDataEntry
+{
+   int			ifIndex;
+   u32 			adslAturPerfLofs;             
+   u32 			adslAturPerfLoss;             
+   u32 			adslAturPerfLprs;                 
+   u32 			adslAturPerfESs;
+   int         		adslAturPerfValidIntervals;
+   int         		adslAturPerfInvalidIntervals;
+   AdslPerfTimeElapsed 	adslAturPerfCurr15MinTimeElapsed;
+   PerfCurrentCount 	adslAturPerfCurr15MinLofs;
+   PerfCurrentCount 	adslAturPerfCurr15MinLoss;
+   PerfCurrentCount 	adslAturPerfCurr15MinLprs;
+   PerfCurrentCount 	adslAturPerfCurr15MinESs;
+   AdslPerfTimeElapsed 	adslAturPerfCurr1DayTimeElapsed;
+   AdslPerfCurrDayCount adslAturPerfCurr1DayLofs;
+   AdslPerfCurrDayCount adslAturPerfCurr1DayLoss;
+   AdslPerfCurrDayCount adslAturPerfCurr1DayLprs;
+   AdslPerfCurrDayCount adslAturPerfCurr1DayESs;
+   int         		adslAturPerfPrev1DayMoniSecs;
+   AdslPerfPrevDayCount adslAturPerfPrev1DayLofs;
+   AdslPerfPrevDayCount adslAturPerfPrev1DayLoss;
+   AdslPerfPrevDayCount adslAturPerfPrev1DayLprs;
+   AdslPerfPrevDayCount adslAturPerfPrev1DayESs;
+   u32			flags;
+} aturPerfDataEntry;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct aturPerfDataExtEntry
+ {
+  int ifIndex;
+  u32 adslAturPerfStatSesL;
+  u32 adslAturPerfStatUasL;
+  u32 adslAturPerfCurr15MinSesL;
+  u32 adslAturPerfCurr15MinUasL;
+  u32 adslAturPerfCurr1DaySesL;
+  u32 adslAturPerfCurr1DayUasL;
+  u32 adslAturPerfPrev1DaySesL;
+  u32 adslAturPerfPrev1DayUasL;
+  u32	flags;
+} aturPerfDataExtEntry;
+#endif
+//ioctl(int fd, GET_ADSL_ATUC_INTVL_INFO, void *struct_adslAtucInvtInfo)
+
+typedef struct adslAtucIntvlInfo {
+	int ifIndex;
+        int IntervalNumber;
+ 	PerfIntervalCount intervalLOF;
+ 	PerfIntervalCount intervalLOS;
+  	PerfIntervalCount intervalES;
+ 	PerfIntervalCount intervalInits; 
+	int intervalValidData;
+ 	u8 flags;
+} adslAtucIntvlInfo;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct adslAtucInvtlExtInfo
+ {
+  int ifIndex;
+  int IntervalNumber;
+  u32 adslAtucIntervalFastR;
+  u32 adslAtucIntervalFailedFastR;
+  u32 adslAtucIntervalSesL;
+  u32 adslAtucIntervalUasL;
+  u32	flags;
+} adslAtucInvtlExtInfo;
+#endif
+//ioctl(int fd, GET_ADSL_ATUR_INTVL_INFO, void *struct_adslAturInvtlInfo)
+
+typedef struct adslAturIntvlInfo {
+	int ifIndex;
+        int IntervalNumber;
+ 	PerfIntervalCount intervalLOF;
+ 	PerfIntervalCount intervalLOS;
+ 	PerfIntervalCount intervalLPR;
+  	PerfIntervalCount intervalES;
+ 	int intervalValidData;
+ 	u8 flags;
+} adslAturIntvlInfo;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct adslAturInvtlExtInfo
+ {
+  int ifIndex;
+  int IntervalNumber;
+  u32 adslAturIntervalSesL;
+  u32 adslAturIntervalUasL;
+  u32	flags;
+} adslAturInvtlExtInfo;
+#endif
+//ioctl(int fd, GET_ADSL_ATUC_CHAN_PERF_DATA,  void *struct_atucChannelPerfDataEntry)
+
+typedef struct atucChannelPerfDataEntry
+{
+   int			ifIndex;
+   u32 			adslAtucChanReceivedBlks;             
+   u32 			adslAtucChanTransmittedBlks;             
+   u32 			adslAtucChanCorrectedBlks;                 
+   u32 			adslAtucChanUncorrectBlks;
+   int         		adslAtucChanPerfValidIntervals;
+   int         		adslAtucChanPerfInvalidIntervals;
+   AdslPerfTimeElapsed 	adslAtucChanPerfCurr15MinTimeElapsed;
+   PerfCurrentCount 	adslAtucChanPerfCurr15MinReceivedBlks;
+   PerfCurrentCount 	adslAtucChanPerfCurr15MinTransmittedBlks;
+   PerfCurrentCount 	adslAtucChanPerfCurr15MinCorrectedBlks;
+   PerfCurrentCount 	adslAtucChanPerfCurr15MinUncorrectBlks;
+   AdslPerfTimeElapsed  adslAtucChanPerfCurr1DayTimeElapsed;
+   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayReceivedBlks;
+   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayTransmittedBlks;
+   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayCorrectedBlks;
+   AdslPerfCurrDayCount adslAtucChanPerfCurr1DayUncorrectBlks;
+   int                  adslAtucChanPerfPrev1DayMoniSecs;
+   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayReceivedBlks;
+   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayTransmittedBlks;
+   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayCorrectedBlks;
+   AdslPerfPrevDayCount adslAtucChanPerfPrev1DayUncorrectBlks;
+   u32			flags;
+}atucChannelPerfDataEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_CHAN_PERF_DATA,  void *struct_aturChannelPerfDataEntry)
+
+typedef struct aturChannelPerfDataEntry
+{
+   int			ifIndex;
+   u32 			adslAturChanReceivedBlks;             
+   u32 			adslAturChanTransmittedBlks;             
+   u32 			adslAturChanCorrectedBlks;                 
+   u32 			adslAturChanUncorrectBlks;
+   int         		adslAturChanPerfValidIntervals;
+   int         		adslAturChanPerfInvalidIntervals;
+   AdslPerfTimeElapsed 	adslAturChanPerfCurr15MinTimeElapsed;
+   PerfCurrentCount 	adslAturChanPerfCurr15MinReceivedBlks;
+   PerfCurrentCount 	adslAturChanPerfCurr15MinTransmittedBlks;
+   PerfCurrentCount 	adslAturChanPerfCurr15MinCorrectedBlks;
+   PerfCurrentCount 	adslAturChanPerfCurr15MinUncorrectBlks;
+   AdslPerfTimeElapsed  adslAturChanPerfCurr1DayTimeElapsed;
+   AdslPerfCurrDayCount adslAturChanPerfCurr1DayReceivedBlks;
+   AdslPerfCurrDayCount adslAturChanPerfCurr1DayTransmittedBlks;
+   AdslPerfCurrDayCount adslAturChanPerfCurr1DayCorrectedBlks;
+   AdslPerfCurrDayCount adslAturChanPerfCurr1DayUncorrectBlks;
+   int                  adslAturChanPerfPrev1DayMoniSecs;
+   AdslPerfPrevDayCount adslAturChanPerfPrev1DayReceivedBlks;
+   AdslPerfPrevDayCount adslAturChanPerfPrev1DayTransmittedBlks;
+   AdslPerfPrevDayCount adslAturChanPerfPrev1DayCorrectedBlks;
+   AdslPerfPrevDayCount adslAturChanPerfPrev1DayUncorrectBlks;
+   u32			flags;
+} aturChannelPerfDataEntry;
+
+
+//ioctl(int fd, GET_ADSL_ATUC_CHAN_INTVL_INFO, void *struct_adslAtucChanIntvlInfo)
+
+typedef struct adslAtucChanIntvlInfo {
+	int ifIndex;
+        int IntervalNumber;
+ 	PerfIntervalCount chanIntervalRecvdBlks;
+ 	PerfIntervalCount chanIntervalXmitBlks;
+  	PerfIntervalCount chanIntervalCorrectedBlks;
+ 	PerfIntervalCount chanIntervalUncorrectBlks;
+ 	int intervalValidData;
+ 	u8 flags;
+} adslAtucChanIntvlInfo;
+
+
+//ioctl(int fd, GET_ADSL_ATUR_CHAN_INTVL_INFO, void *struct_adslAturChanIntvlInfo)
+
+typedef struct adslAturChanIntvlInfo {
+	int ifIndex;
+        int IntervalNumber;
+ 	PerfIntervalCount chanIntervalRecvdBlks;
+ 	PerfIntervalCount chanIntervalXmitBlks;
+  	PerfIntervalCount chanIntervalCorrectedBlks;
+ 	PerfIntervalCount chanIntervalUncorrectBlks;
+ 	int intervalValidData;
+	u8 flags;
+} adslAturChanIntvlInfo;
+
+
+//ioctl(int fd, GET_ADSL_ALRM_CONF_PROF,  void *struct_adslLineAlarmConfProfileEntry)
+//ioctl(int fd, SET_ADSL_ALRM_CONF_PROF,  void *struct_adslLineAlarmConfProfileEntry)
+
+typedef struct  adslLineAlarmConfProfileEntry
+ {
+  unsigned char adslLineAlarmConfProfileName[32];
+    int 	adslAtucThresh15MinLofs;
+    int 	adslAtucThresh15MinLoss;
+    int 	adslAtucThresh15MinESs;
+    u32 	adslAtucThreshFastRateUp;
+    u32 	adslAtucThreshInterleaveRateUp;
+    u32 	adslAtucThreshFastRateDown;
+    u32 	adslAtucThreshInterleaveRateDown;
+    int 	adslAtucInitFailureTrapEnable;
+    int 	adslAturThresh15MinLofs;
+    int 	adslAturThresh15MinLoss;
+    int 	adslAturThresh15MinLprs;
+    int 	adslAturThresh15MinESs;
+    u32 	adslAturThreshFastRateUp;
+    u32 	adslAturThreshInterleaveRateUp;
+    u32 	adslAturThreshFastRateDown;
+    u32 	adslAturThreshInterleaveRateDown;
+    int 	adslLineAlarmConfProfileRowStatus;
+    u32	flags;
+} adslLineAlarmConfProfileEntry;
+
+#ifdef IFXMIPS_MEI_MIB_RFC3440
+typedef struct adslLineAlarmConfProfileExtEntry
+ {
+  u8  adslLineAlarmConfProfileExtName[32];
+  u32 adslAtucThreshold15MinFailedFastR;
+  u32 adslAtucThreshold15MinSesL;
+  u32 adslAtucThreshold15MinUasL;
+  u32 adslAturThreshold15MinSesL;
+  u32 adslAturThreshold15MinUasL;
+  u32	flags;
+} adslLineAlarmConfProfileExtEntry;
+#endif
+//TRAPS
+
+/* The following Data Sturctures are added to support the WEB related parameters for ADSL Statistics */
+typedef struct  adslLineStatus
+ {
+    int 	adslModemStatus;
+    u32 	adslModeSelected;
+    int 	adslAtucThresh15MinESs;
+    int 	adslTrellisCodeEnable;
+    int 	adslLatency;
+    u8 flags;
+ } adslLineStatusInfo;
+
+typedef struct  adslLineRate
+ {
+    u32 	adslDataRateds;
+    u32 	adslDataRateus;
+    u32 	adslATTNDRds;	
+    u32 	adslATTNDRus;	
+    u8		flags;
+ } adslLineRateInfo;
+
+typedef struct  adslLineInfo
+ {
+    u32 	adslInterleaveDepthds;
+    u32 	adslInterleaveDepthus;
+    u32 	adslLATNds;
+    u32 	adslLATNus;
+    u32 	adslSATNds;
+    u32 	adslSATNus;
+    int	 	adslSNRMds;
+    int	 	adslSNRMus;
+    int	 	adslACATPds;
+    int		adslACATPus;
+    u32	flags;
+ } adslLineInfo;
+
+typedef struct  adslNearEndPerfStats
+ {
+    u32 	adslSuperFrames; 
+    u32 	adslneLOS;
+    u32 	adslneLOF;
+    u32 	adslneLPR;
+    u32 	adslneNCD;
+    u32 	adslneLCD;
+    u32 	adslneCRC;
+    u32		adslneRSCorr;
+    u32		adslneFECS;
+    u32		adslneES;
+    u32		adslneSES;
+    u32		adslneLOSS;
+    u32		adslneUAS;
+    u32		adslneHECErrors;
+    u32		flags;
+ } adslNearEndPerfStats;
+
+typedef struct  adslFarEndPerfStats
+ {
+    u32 	adslfeLOS;
+    u32 	adslfeLOF;
+    u32 	adslfeLPR;
+    u32 	adslfeNCD;
+    u32 	adslfeLCD;
+    u32 	adslfeCRC;
+    u32		adslfeRSCorr;
+    u32		adslfeFECS;
+    u32		adslfeES;
+    u32		adslfeSES;
+    u32		adslfeLOSS;
+    u32		adslfeUAS;
+    u32		adslfeHECErrors;
+    u32		flags;
+ } adslFarEndPerfStats;
+
+/* The number of tones (and hence indexes) is dependent on the ADSL mode - G.992.1, G.992.2, G.992.3, * G.992.4 and G.992.5 */
+typedef struct adslATURSubcarrierInfo {
+	int 	ifindex;
+	u16	HLINSCds;
+	u16	HLINpsds[1024];/* Even index = real part; Odd Index
+				    = imaginary part for each tone */
+	u16	HLOGMTds;
+	u16	HLOGpsds[512];
+	u16	QLNMTds;
+	u16	QLNpsds[512];
+	u16	SNRMTds;
+	u16	SNRpsds[512];  
+	u16	BITpsds[512];
+	s16	GAINpsds[512]; /* Signed value in 0.1dB units. i.e dB * 10.
+				Needs to be converted into linear scale*/
+	u16	flags;
+}adslATURSubcarrierInfo;
+
+typedef struct adslATUCSubcarrierInfo {
+	int 	ifindex;
+	u16	HLINSCus;
+	u16	HLINpsus[128];/* Even index = real part; Odd Index
+				    = imaginary part for each tone */
+	u16	HLOGMTus;
+	u16	HLOGpsus[64];
+	u16	QLNMTus;
+	u16	QLNpsus[64]; 
+	u16	SNRMTus;
+	u16 	SNRpsus[64];  
+	u16	BITpsus[64];
+	s16	GAINpsus[64]; /* Signed value in 0.1dB units. i.e dB * 10.
+				Needs to be converted into linear scale*/
+	u16	flags;
+}adslATUCSubcarrierInfo;
+
+#ifndef u_int16
+#define u_int16 u16
+#endif
+
+typedef struct adslInitStats {
+	u_int16	FullInitializationCount;
+	u_int16 FailedFullInitializationCount;
+	u_int16 LINIT_Errors;
+	u_int16	Init_Timeouts;
+}adslInitStats;
+
+typedef struct adslPowerSpectralDensity {
+	int	ACTPSDds;
+	int 	ACTPSDus;
+}adslPowerSpectralDensity;
+
+//ioctl(int fd, ADSL_ATUR_TRAPS, void  *uint16_flags)
+typedef union structpts {
+	adslLineTableEntry * adslLineTableEntry_pt;
+	adslAtucPhysEntry * adslAtucPhysEntry_pt;
+	adslAturPhysEntry * adslAturPhysEntry_pt;
+	adslAtucChanInfo * adslAtucChanInfo_pt;
+	adslAturChanInfo * adslAturChanInfo_pt;
+	atucPerfDataEntry * atucPerfDataEntry_pt;
+	aturPerfDataEntry * aturPerfDataEntry_pt;
+	adslAtucIntvlInfo * adslAtucIntvlInfo_pt;
+	adslAturIntvlInfo * adslAturIntvlInfo_pt;
+	atucChannelPerfDataEntry * atucChannelPerfDataEntry_pt;
+	aturChannelPerfDataEntry * aturChannelPerfDataEntry_pt;
+	adslAtucChanIntvlInfo * adslAtucChanIntvlInfo_pt;
+	adslAturChanIntvlInfo * adslAturChanIntvlInfo_pt;
+	adslLineAlarmConfProfileEntry * adslLineAlarmConfProfileEntry_pt;
+	// RFC 3440
+	
+    #ifdef IFXMIPS_MEI_MIB_RFC3440
+	adslLineExtTableEntry * adslLineExtTableEntry_pt;
+	atucPerfDataExtEntry * atucPerfDataExtEntry_pt;
+	adslAtucInvtlExtInfo * adslAtucInvtlExtInfo_pt;
+	aturPerfDataExtEntry * aturPerfDataExtEntry_pt;
+	adslAturInvtlExtInfo * adslAturInvtlExtInfo_pt;
+	adslLineAlarmConfProfileExtEntry * adslLineAlarmConfProfileExtEntry_pt;
+    #endif 
+    	adslLineStatusInfo	* adslLineStatusInfo_pt;
+    	adslLineRateInfo	* adslLineRateInfo_pt;
+    	adslLineInfo		* adslLineInfo_pt;
+    	adslNearEndPerfStats	* adslNearEndPerfStats_pt;
+    	adslFarEndPerfStats	* adslFarEndPerfStats_pt;
+	adslATUCSubcarrierInfo  * adslATUCSubcarrierInfo_pt;
+	adslATURSubcarrierInfo  * adslATURSubcarrierInfo_pt;
+	adslPowerSpectralDensity * adslPowerSpectralDensity_pt;
+}structpts;
+
+#endif /* ] __IFXMIPS_MEI_APP_IOCTL_H */
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h
new file mode 100644
index 0000000000..c34662013c
--- /dev/null
+++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_bsp.h
@@ -0,0 +1,308 @@
+/******************************************************************************
+**
+** FILE NAME    : ifxmips_mei_bsp.h
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+*******************************************************************************/
+#ifndef _IFXMIPS_MEI_BSP_H_
+#define _IFXMIPS_MEI_BSP_H_
+
+/***	Register address offsets, relative to MEI_SPACE_ADDRESS ***/
+#define MEI_DATA_XFR_OFFSET				(0x0000)
+#define	MEI_VERSION_OFFSET				(0x0004)
+#define	MEI_ARC_GP_STAT_OFFSET				(0x0008)
+#define MEI_DATA_XFR_STAT_OFFSET			(0x000C)
+#define	MEI_XFR_ADDR_OFFSET				(0x0010)
+#define MEI_MAX_WAIT_OFFSET				(0x0014)
+#define	MEI_TO_ARC_INT_OFFSET				(0x0018)
+#define	ARC_TO_MEI_INT_OFFSET				(0x001C)
+#define	ARC_TO_MEI_INT_MASK_OFFSET			(0x0020)
+#define	MEI_DEBUG_WAD_OFFSET				(0x0024)
+#define MEI_DEBUG_RAD_OFFSET				(0x0028)
+#define	MEI_DEBUG_DATA_OFFSET				(0x002C)
+#define	MEI_DEBUG_DEC_OFFSET				(0x0030)
+#define MEI_CONFIG_OFFSET				(0x0034)
+#define	MEI_RST_CONTROL_OFFSET				(0x0038)
+#define	MEI_DBG_MASTER_OFFSET				(0x003C)
+#define	MEI_CLK_CONTROL_OFFSET				(0x0040)
+#define	MEI_BIST_CONTROL_OFFSET				(0x0044)
+#define	MEI_BIST_STAT_OFFSET				(0x0048)
+#define MEI_XDATA_BASE_SH_OFFSET			(0x004c)
+#define MEI_XDATA_BASE_OFFSET				(0x0050)
+#define MEI_XMEM_BAR_BASE_OFFSET			(0x0054)
+#define MEI_XMEM_BAR0_OFFSET				(0x0054)
+#define MEI_XMEM_BAR1_OFFSET				(0x0058)
+#define MEI_XMEM_BAR2_OFFSET				(0x005C)
+#define MEI_XMEM_BAR3_OFFSET				(0x0060)
+#define MEI_XMEM_BAR4_OFFSET				(0x0064)
+#define MEI_XMEM_BAR5_OFFSET				(0x0068)
+#define MEI_XMEM_BAR6_OFFSET				(0x006C))
+#define MEI_XMEM_BAR7_OFFSET				(0x0070)
+#define MEI_XMEM_BAR8_OFFSET				(0x0074)
+#define MEI_XMEM_BAR9_OFFSET				(0x0078)
+#define MEI_XMEM_BAR10_OFFSET				(0x007C)
+#define MEI_XMEM_BAR11_OFFSET				(0x0080)
+#define MEI_XMEM_BAR12_OFFSET				(0x0084)
+#define MEI_XMEM_BAR13_OFFSET				(0x0088)
+#define MEI_XMEM_BAR14_OFFSET				(0x008C)
+#define MEI_XMEM_BAR15_OFFSET				(0x0090)
+#define MEI_XMEM_BAR16_OFFSET				(0x0094)
+
+#define WHILE_DELAY 20000
+/*
+**	Define where in ME Processor's memory map the Stratify chip lives
+*/
+
+#define MAXSWAPSIZE      	8 * 1024	//8k *(32bits)
+
+//      Mailboxes
+#define MSG_LENGTH		16	// x16 bits
+#define YES_REPLY      	 	1
+#define NO_REPLY         	0
+
+#define CMV_TIMEOUT		1000	//jiffies
+
+//  Block size per BAR
+#define SDRAM_SEGMENT_SIZE	(64*1024)
+// Number of Bar registers
+#define MAX_BAR_REGISTERS	(17)
+
+#define XDATA_REGISTER		(15)
+
+#define IFXMIPS_MEI_IOCTL_CMV_WINHOST		IFX_ADSL_IOC_CMV_WINHOST
+
+#define IFXMIPS_MEI_IOCTL_CMV_READ		IFX_ADSL_IOC_CMV_READ
+#define IFXMIPS_MEI_IOCTL_CMV_WRITE		IFX_ADSL_IOC_CMV_WRITE
+
+#define IFXMIPS_MEI_IOCTL_GET_BASE_ADDRESS	IFX_ADSL_IOC_GET_BASE_ADDRESS
+
+// ARC register addresss
+#define ARC_STATUS				0x0
+#define ARC_LP_START				0x2
+#define ARC_LP_END				0x3
+#define ARC_DEBUG				0x5
+#define ARC_INT_MASK				0x10A
+
+#define IRAM0_BASE 				(0x00000)
+#define IRAM1_BASE 				(0x04000)
+#define BRAM_BASE  				(0x0A000)
+
+#define ADSL_BASE				(0x20000)
+#define CRI_BASE				(ADSL_BASE + 0x11F00)
+#define CRI_CCR0				(CRI_BASE + 0x00)
+#define CRI_RST					(CRI_BASE + 0x04*4)
+#define ADSL_DILV_BASE 				(ADSL_BASE+0x20000)
+
+//
+#define IRAM0_ADDR_BIT_MASK   0xFFF
+#define IRAM1_ADDR_BIT_MASK   0xFFF
+#define BRAM_ADDR_BIT_MASK    0xFFF
+#define RX_DILV_ADDR_BIT_MASK 0x1FFF
+
+/***  Bit definitions ***/
+
+#define FALSE	0
+#define TRUE	1
+#define BIT0	1<<0
+#define BIT1	1<<1
+#define BIT2	1<<2
+#define BIT3	1<<3
+#define BIT4	1<<4
+#define BIT5	1<<5
+#define BIT6	1<<6
+#define BIT7	1<<7
+#define BIT8	1<<8
+#define BIT9	1<<9
+#define BIT10 	1<<10
+#define BIT11	1<<11
+#define BIT12	1<<12
+#define BIT13	1<<13
+#define BIT14	1<<14
+#define BIT15	1<<15
+#define BIT16 	1<<16
+#define BIT17	1<<17
+#define BIT18	1<<18
+#define BIT19	1<<19
+#define BIT20	1<<20
+#define BIT21	1<<21
+#define BIT22	1<<22
+#define BIT23	1<<23
+#define BIT24	1<<24
+#define BIT25	1<<25
+#define BIT26	1<<26
+#define BIT27	1<<27
+#define BIT28	1<<28
+#define BIT29	1<<29
+#define BIT30	1<<30
+#define BIT31	1<<31
+
+// CRI_CCR0 Register definitions
+#define CLK_2M_MODE_ENABLE			BIT6
+#define	ACL_CLK_MODE_ENABLE			BIT4
+#define FDF_CLK_MODE_ENABLE			BIT2
+#define STM_CLK_MODE_ENABLE			BIT0
+
+// CRI_RST Register definitions
+#define FDF_SRST				BIT3
+#define MTE_SRST				BIT2
+#define FCI_SRST				BIT1
+#define AAI_SRST				BIT0
+
+//      MEI_TO_ARC_INTERRUPT Register definitions
+#define	MEI_TO_ARC_INT1			BIT3
+#define	MEI_TO_ARC_INT0			BIT2
+#define MEI_TO_ARC_CS_DONE		BIT1	//need to check
+#define	MEI_TO_ARC_MSGAV		BIT0
+
+//      ARC_TO_MEI_INTERRUPT Register definitions
+#define	ARC_TO_MEI_INT1			BIT8
+#define	ARC_TO_MEI_INT0			BIT7
+#define	ARC_TO_MEI_CS_REQ		BIT6
+#define	ARC_TO_MEI_DBG_DONE		BIT5
+#define	ARC_TO_MEI_MSGACK		BIT4
+#define	ARC_TO_MEI_NO_ACCESS		BIT3
+#define	ARC_TO_MEI_CHECK_AAITX		BIT2
+#define	ARC_TO_MEI_CHECK_AAIRX		BIT1
+#define	ARC_TO_MEI_MSGAV		BIT0
+
+//      ARC_TO_MEI_INTERRUPT_MASK Register definitions
+#define	GP_INT1_EN			BIT8
+#define	GP_INT0_EN			BIT7
+#define	CS_REQ_EN			BIT6
+#define	DBG_DONE_EN			BIT5
+#define	MSGACK_EN			BIT4
+#define	NO_ACC_EN			BIT3
+#define	AAITX_EN			BIT2
+#define	AAIRX_EN			BIT1
+#define	MSGAV_EN			BIT0
+
+#define	MEI_SOFT_RESET			BIT0
+
+#define	HOST_MSTR			BIT0
+
+#define JTAG_MASTER_MODE		0x0
+#define MEI_MASTER_MODE			HOST_MSTR
+
+//      MEI_DEBUG_DECODE Register definitions
+#define MEI_DEBUG_DEC_MASK		(0x3)
+#define MEI_DEBUG_DEC_AUX_MASK		(0x0)
+#define MEI_DEBUG_DEC_DMP1_MASK		(0x1)
+#define MEI_DEBUG_DEC_DMP2_MASK		(0x2)
+#define MEI_DEBUG_DEC_CORE_MASK         (0x3)
+
+#define AUX_STATUS			(0x0)
+//      ARC_TO_MEI_MAILBOX[11] is a special location used to indicate
+//      page swap requests.
+#define MEI_TO_ARC_MAILBOX		(0xDFD0)
+#define MEI_TO_ARC_MAILBOXR		(MEI_TO_ARC_MAILBOX + 0x2C)
+
+#define	ARC_TO_MEI_MAILBOX		(0xDFA0)
+#define ARC_MEI_MAILBOXR		(ARC_TO_MEI_MAILBOX + 0x2C)
+
+// Codeswap request messages are indicated by setting BIT31
+#define OMB_CODESWAP_MESSAGE_MSG_TYPE_MASK	(0x80000000)
+
+// Clear Eoc messages received are indicated by setting BIT17 
+#define OMB_CLEAREOC_INTERRUPT_CODE	(0x00020000)
+
+/*
+**	Swap page header
+*/
+//      Page must be loaded at boot time if size field has BIT31 set
+#define BOOT_FLAG	(BIT31)
+#define BOOT_FLAG_MASK	~BOOT_FLAG
+
+#define FREE_RELOAD		1
+#define FREE_SHOWTIME		2
+#define FREE_ALL		3
+
+// marcos
+#define	IFXMIPS_WRITE_REGISTER_L(data,addr)	do{ *((volatile u32*)(addr)) = (u32)(data);} while (0)
+#define IFXMIPS_READ_REGISTER_L(addr) 	(*((volatile u32*)(addr)))
+#define SET_BIT(reg, mask)                  reg |= (mask)
+#define CLEAR_BIT(reg, mask)                reg &= (~mask)
+#define CLEAR_BITS(reg, mask)               CLEAR_BIT(reg, mask)
+#define SET_BITS(reg, mask)                 SET_BIT(reg, mask)
+#define SET_BITFIELD(reg, mask, off, val)   {reg &= (~mask); reg |= (val << off);}
+
+#define ALIGN_SIZE			    ( 1L<<10 )	//1K size align
+#define MEM_ALIGN(addr)		    (((addr) + ALIGN_SIZE - 1) & ~ (ALIGN_SIZE -1) )
+
+// swap marco
+#define MEI_HALF_WORD_SWAP(data) {data = ((data & 0xffff)<<16) + ((data & 0xffff0000)>>16);}
+#define MEI_BYTE_SWAP(data) {data = ((data & 0xff)<<24) + ((data & 0xff00)<<8)+ ((data & 0xff0000)>>8)+ ((data & 0xff000000)>>24);}
+
+//      Swap page header describes size in 32-bit words, load location, and image offset
+//      for program and/or data segments
+typedef struct _arc_swp_page_hdr {
+	u32 p_offset;		//Offset bytes of progseg from beginning of image
+	u32 p_dest;		//Destination addr of progseg on processor
+	u32 p_size;		//Size in 32-bitwords of program segment
+	u32 d_offset;		//Offset bytes of dataseg from beginning of image
+	u32 d_dest;		//Destination addr of dataseg on processor
+	u32 d_size;		//Size in 32-bitwords of data segment
+} ARC_SWP_PAGE_HDR;
+
+/*
+**	Swap image header
+*/
+#define GET_PROG	0	//      Flag used for program mem segment
+#define GET_DATA	1	//      Flag used for data mem segment
+
+//      Image header contains size of image, checksum for image, and count of
+//      page headers. Following that are 'count' page headers followed by
+//      the code and/or data segments to be loaded
+typedef struct _arc_img_hdr {
+	u32 size;		//      Size of binary image in bytes
+	u32 checksum;		//      Checksum for image
+	u32 count;		//      Count of swp pages in image
+	ARC_SWP_PAGE_HDR page[1];	//      Should be "count" pages - '1' to make compiler happy
+} ARC_IMG_HDR;
+
+typedef struct smmu_mem_info {
+	int type;
+	unsigned long nCopy;
+	unsigned long size;
+	unsigned char *address;
+	unsigned char *org_address;
+} smmu_mem_info_t;
+
+typedef struct ifxmips_mei_device_private {
+	int modem_ready;
+	int arcmsgav;
+	int cmv_reply;
+	int cmv_waiting;
+	// Mei to ARC CMV count, reply count, ARC Indicator count       
+	int indicator_count;
+	int cmv_count;
+	int reply_count;
+	unsigned long image_size;
+	int nBar;
+	u16 Recent_indicator[MSG_LENGTH];
+
+	u16 CMV_RxMsg[MSG_LENGTH] __attribute__ ((aligned (4)));
+
+	smmu_mem_info_t adsl_mem_info[MAX_BAR_REGISTERS];
+	ARC_IMG_HDR *img_hdr;
+	//  to wait for arc cmv reply, sleep on wait_queue_arcmsgav;
+	wait_queue_head_t wait_queue_arcmsgav;
+	wait_queue_head_t wait_queue_modemready;
+	MEI_mutex_t mei_cmv_sema;
+} ifxmips_mei_device_private_t;
+
+#endif //_IFXMIPS_MEI_BSP_H_
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h
new file mode 100644
index 0000000000..d11f04ea97
--- /dev/null
+++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_ioctl.h
@@ -0,0 +1,734 @@
+/******************************************************************************
+**
+** FILE NAME    : ifxmips_mei_ioctl.h
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+*******************************************************************************/
+#ifndef         _IFXMIPS_MEI_IOCTL_H
+#define        	_IFXMIPS_MEI_IOCTL_H
+
+/////////////////////////////////////////////////////////////////////////////////////////////////////
+#define PCM_BUFF_SIZE		1024	//bytes
+//  interrupt numbers
+
+#if !(defined(_IFXMIPS_ADSL_APP) || defined (_AMAZON_ADSL_APP))
+
+// Number of intervals
+#define INTERVAL_NUM					192	//two days
+typedef struct ifxmips_mei_mib {
+	struct list_head list;
+	struct timeval start_time;	//start of current interval
+
+	int AtucPerfLof;
+	int AtucPerfLos;
+	int AtucPerfEs;
+	int AtucPerfInit;
+
+	int AturPerfLof;
+	int AturPerfLos;
+	int AturPerfLpr;
+	int AturPerfEs;
+
+	int AturChanPerfRxBlk;
+	int AturChanPerfTxBlk;
+	int AturChanPerfCorrBlk;
+	int AturChanPerfUncorrBlk;
+
+	//RFC-3440
+	int AtucPerfStatFastR;
+	int AtucPerfStatFailedFastR;
+	int AtucPerfStatSesL;
+	int AtucPerfStatUasL;
+	int AturPerfStatSesL;
+	int AturPerfStatUasL;
+} ifxmips_mei_mib;
+
+typedef struct adslChanPrevTxRate {
+	u32 adslAtucChanPrevTxRate;
+	u32 adslAturChanPrevTxRate;
+} adslChanPrevTxRate;
+
+typedef struct adslPhysCurrStatus {
+	u32 adslAtucCurrStatus;
+	u32 adslAturCurrStatus;
+} adslPhysCurrStatus;
+
+typedef struct ChanType {
+	int interleave;
+	int fast;
+	int bearchannel0;
+	int bearchannel1;
+} ChanType;
+
+typedef struct mib_previous_read {
+	u16 ATUC_PERF_ESS;
+	u16 ATUR_PERF_ESS;
+	u32 ATUR_CHAN_RECV_BLK;
+	u16 ATUR_CHAN_CORR_BLK_INTL;
+	u16 ATUR_CHAN_CORR_BLK_FAST;
+	u16 ATUR_CHAN_UNCORR_BLK_INTL;
+	u16 ATUR_CHAN_UNCORR_BLK_FAST;
+	u16 ATUC_PERF_STAT_FASTR;
+	u16 ATUC_PERF_STAT_FAILED_FASTR;
+	u16 ATUC_PERF_STAT_SESL;
+	u16 ATUC_PERF_STAT_UASL;
+	u16 ATUR_PERF_STAT_SESL;
+} mib_previous_read;
+
+typedef struct mib_flags_pretime {
+	struct timeval ATUC_PERF_LOSS_PTIME;
+	struct timeval ATUC_PERF_LOFS_PTIME;
+	struct timeval ATUR_PERF_LOSS_PTIME;
+	struct timeval ATUR_PERF_LOFS_PTIME;
+	struct timeval ATUR_PERF_LPR_PTIME;
+} mib_flags_pretime;
+
+		//  cmv message structures
+#define	MP_PAYLOAD_SIZE         			12
+typedef struct mpmessage {
+	u16 iFunction;
+	u16 iGroup;
+	u16 iAddress;
+	u16 iIndex;
+	u16 iPayload[MP_PAYLOAD_SIZE];
+} MPMessage;
+#endif
+
+typedef struct meireg {
+	u32 iAddress;
+	u32 iData;
+} meireg;
+
+#define MEIDEBUG_BUFFER_SIZES 50
+typedef struct meidebug {
+	u32 iAddress;
+	u32 iCount;
+	u32 buffer[MEIDEBUG_BUFFER_SIZES];
+} meidebug;
+
+//==============================================================================
+// Group definitions                                                              
+//==============================================================================
+#define OPTN                    5
+#define CNFG                    8
+#define CNTL                    1
+#define STAT                    2
+#define RATE                    6
+#define PLAM                    7
+#define INFO                    3
+#define TEST			4
+//==============================================================================
+// Opcode definitions
+//==============================================================================
+#define H2D_CMV_READ                            0x00
+#define H2D_CMV_WRITE                           0x04
+#define H2D_CMV_INDICATE_REPLY                  0x10
+#define H2D_ERROR_OPCODE_UNKNOWN          	0x20
+#define H2D_ERROR_CMV_UNKNOWN                	0x30
+
+#define D2H_CMV_READ_REPLY                     	0x01
+#define D2H_CMV_WRITE_REPLY                     0x05
+#define D2H_CMV_INDICATE                        0x11
+#define D2H_ERROR_OPCODE_UNKNOWN                0x21
+#define D2H_ERROR_CMV_UNKNOWN                   0x31
+#define D2H_ERROR_CMV_READ_NOT_AVAILABLE        0x41
+#define D2H_ERROR_CMV_WRITE_ONLY                0x51
+#define D2H_ERROR_CMV_READ_ONLY                 0x61
+
+#define H2D_DEBUG_READ_DM                       0x02
+#define H2D_DEBUG_READ_PM                       0x06
+#define H2D_DEBUG_WRITE_DM                      0x0a
+#define H2D_DEBUG_WRITE_PM                      0x0e
+
+#define D2H_DEBUG_READ_DM_REPLY         	0x03
+#define D2H_DEBUG_READ_FM_REPLY         	0x07
+#define D2H_DEBUG_WRITE_DM_REPLY        	0x0b
+#define D2H_DEBUG_WRITE_FM_REPLY        	0x0f
+#define D2H_ERROR_ADDR_UNKNOWN          	0x33
+
+#define D2H_AUTONOMOUS_MODEM_READY_MSG		0xf1
+//==============================================================================
+// INFO register address field definitions
+//==============================================================================
+
+#define INFO_TxState					0
+#define INFO_RxState					1
+#define INFO_TxNextState				2
+#define INFO_RxNextState				3
+#define INFO_TxStateJumpFrom			        4
+#define INFO_RxStateJumpFrom			        5
+
+#define INFO_ReverbSnrBuf				8
+#define INFO_ReverbEchoSnrBuf			        9
+#define INFO_MedleySnrBuf				10
+#define INFO_RxShowtimeSnrBuf		              	11
+#define INFO_DECdelay					12
+#define INFO_DECExponent				13
+#define INFO_DECTaps					14
+#define INFO_AECdelay					15
+#define INFO_AECExponent				16
+#define INFO_AECTaps					17
+#define INFO_TDQExponent				18
+#define INFO_TDQTaps					19
+#define INFO_FDQExponent				20
+#define INFO_FDQTaps					21
+#define INFO_USBat					22
+#define INFO_DSBat					23
+#define INFO_USFineGains				24
+#define INFO_DSFineGains				25
+#define INFO_BitloadFirstChannel		        26
+#define INFO_BitloadLastChannel		                27
+#define INFO_PollEOCData				28	// CO specific
+#define INFO_CSNRMargin					29	// CO specific
+#define INFO_RCMsgs1					30
+#define INFO_RMsgs1					31
+#define INFO_RMsgRA					32
+#define INFO_RCMsgRA					33
+#define INFO_RMsg2					34
+#define INFO_RCMsg2					35
+#define INFO_BitLoadOK				        36
+#define INFO_RCRates1					37
+#define INFO_RRates1Tab					38
+#define INFO_RMsgs1Tab					39
+#define INFO_RMsgRATab					40
+#define INFO_RRatesRA					41
+#define INFO_RCRatesRA					42
+#define INFO_RRates2					43
+#define INFO_RCRates2					44
+#define INFO_PackedRMsg2				45
+#define INFO_RxBitSwapFlag			        46
+#define INFO_TxBitSwapFlag			        47
+#define INFO_ShowtimeSNRUpdateCount	                48
+#define INFO_ShowtimeFDQUpdateCount	                49
+#define INFO_ShowtimeDECUpdateCount	                50
+#define INFO_CopyRxBuffer				51
+#define INFO_RxToneBuf				        52
+#define INFO_TxToneBuf                                  53
+#define INFO_Version					54
+#define INFO_TimeStamp                                  55
+#define INFO_feVendorID					56
+#define INFO_feSerialNum				57
+#define INFO_feVersionNum				58
+#define INFO_BulkMemory					59	//Points to start of bulk memory
+#define INFO_neVendorID                                 60
+#define INFO_neVersionNum				61
+#define INFO_neSerialNum				62
+
+//==============================================================================
+// RATE register address field definitions
+//==============================================================================
+
+#define RATE_UsRate					0
+#define RATE_DsRate					1
+
+//==============================================================================
+// PLAM (Physical Layer Management) register address field definitions
+//      (See G997.1 for reference)
+//==============================================================================
+
+	//                                      ///
+	// Failure Flags        ///
+	//                                      ///
+
+#define PLAM_NearEndFailureFlags		0
+#define PLAM_FarEndFailureFlags			1
+
+	//                                                                      ///
+	// Near End Failure Flags Bit Definitions       ///
+	//                                                                      ///
+
+// ADSL Failures ///
+#define PLAM_LOS_FailureBit				0x0001
+#define PLAM_LOF_FailureBit				0x0002
+#define PLAM_LPR_FailureBit				0x0004
+#define PLAM_RFI_FailureBit				0x0008
+
+// ATM Failures ///
+#define PLAM_NCD_LP0_FailureBit				0x0010
+#define PLAM_NCD_LP1_FailureBit				0x0020
+#define PLAM_LCD_LP0_FailureBit				0x0040
+#define PLAM_LCD_LP1_FailureBit				0x0080
+
+#define PLAM_NCD_BC0_FailureBit				0x0100
+#define PLAM_NCD_BC1_FailureBit				0x0200
+#define PLAM_LCD_BC0_FailureBit				0x0400
+#define PLAM_LCD_BC1_FailureBit				0x0800
+	//                                              ///
+	// Performance Counts   ///
+	//                                              ///
+
+#define PLAM_NearEndCrcCnt				2
+#define PLAM_CorrectedRSErrors			        3
+
+#define PLAM_NearEndECSCnt				6
+#define PLAM_NearEndESCnt		                7
+#define PLAM_NearEndSESCnt				8
+#define PLAM_NearEndLOSSCnt				9
+#define PLAM_NearEndUASLCnt				10
+
+#define PLAM_NearEndHECErrCnt				11
+
+#define PLAM_NearEndHECTotCnt				16
+#define PLAM_NearEndCellTotCnt			        18
+#define PLAM_NearEndSfCntLSW				20
+#define PLAM_NearEndSfCntMSW				21
+
+#define PLAM_FarEndFebeCnt				24
+
+#define PLAM_FarEndFecCnt				28
+
+#define PLAM_FarEndFECSCnt				32
+#define PLAM_FarEndESCnt				33
+#define PLAM_FarEndSESCnt				34
+#define PLAM_FarEndLOSSCnt				35
+#define PLAM_FarEndUASLCnt				36
+
+#define PLAM_FarEndHECErrCnt				37
+
+#define PLAM_FarEndHECTotCnt				41
+
+#define PLAM_FarEndCellTotCnt				43
+
+#define PLAM_SNRMargin_0_1db				45
+
+#define PLAM_SNRMargin					46
+
+//==============================================================================
+// CNTL register address and bit field definitions
+//==============================================================================
+
+#define CNTL_ModemControl				0
+
+#define CNTL_ModemReset					0x0
+#define CNTL_ModemStart					0x2
+
+//==============================================================================
+// STAT register address and bit field definitions
+//==============================================================================
+
+#define STAT_MacroState					0
+#define STAT_Mode					1
+#define STAT_DMTFramingMode				2
+#define STAT_SleepState					3
+#define STAT_Misc					4
+#define STAT_FailureState				5
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // STAT_OLRStatus provides status of OLR
+ //16-bit STAT_OLRStatus_DS
+ //  [1:0]      :       OLR status 00=IDLE,  01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
+ //  [3:2]:             Reserved
+ //  [5:4]:             OLR_Type (1:bitswap; 2: DRR; 3: SRA)
+ //  [7:6]:             Reserved
+ //  [10:8]:            >0=Request. 0=not.   For DS, # of request transmissions/retransmissions (3 bits).
+ //  [11]:              1=Receive Response, 0=not
+ //  [15:12]:   Reserved
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ ///
+#define STAT_OLRStatus_DS				6
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // STAT_OLRStatus provides status of OLR
+ // 16-bit STAT_OLRStatus_US CMV
+ //  [1:0]      :       OLR status 00=IDLE,  01=OLR_IN_PROGRESS, 10=OLR_Completed, 11=OLR_Aborted
+ //  [3:2]:             Reserved
+ //  [5:4]:             OLR_Type (1:bitswap; 2: DRR; 3: SRA)
+ //  [7:6]:             Reserved
+ //  [8]:               1=Request Received. 0=not.
+ //  [10:9]:     Reserved
+ //  [11]:              1=Response Sent, 0=not
+ //  [15:12]:   Reserved
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+///
+#define STAT_OLRStatus_US				7
+
+////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // STAT_PMStatus provides status of PM
+ // 16-bit STAT_PMStatus CMV
+ //  [1:0]      :       PM Status 00=IDLE,  01=PM_IN_PROGRESS, 10=PM_Completed, 11=PM_Aborted
+ //  [2] :              0=ATU_R initiated PM; 1 = ATU_C initiated PM
+ //  [3]:               Reserved
+ //  [5:4]:             PM_Type (1:Simple Request; 2: L2 request; 3: L2 trim)
+ //  [7:6]:             Reserved
+ //  [10:8]:            >0=Request. 0=not.   # of request transmissions/retransmissions (3 bits).
+ //  [11]:              1=Response, 0=not
+ //  [15:12]:   Reserved
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ ///
+#define STAT_PMStatus					8
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ // 16-bit STAT_OLRError_DS, STAT_OLRError_US, STAT_PMError
+ // [3:0]:          OLR/PM response reason code
+ // [7:4]:             OLR/PM Internal error code
+ // [15:8]:         OLR/PM Reserved for future
+ //////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+ ///
+#define STAT_OLRError_DS				9
+#define STAT_OLRError_US				10
+#define STAT_PMError					11
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_MacroState
+// MacroState reflects the high level state of the modem
+
+#define STAT_InitState				0x0000
+#define STAT_ReadyState		            	0x0001
+#define STAT_FailState				0x0002
+#define STAT_IdleState				0x0003
+#define STAT_QuietState				0x0004
+#define STAT_GhsState				0x0005
+#define STAT_FullInitState			0x0006
+#define STAT_ShowTimeState			0x0007
+#define STAT_FastRetrainState			0x0008
+#define STAT_LoopDiagMode   			0x0009
+#define STAT_ShortInit          		0x000A	// Bis short initialization ///
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_Mode
+// ConfigurationMode indicates the mode of the current ADSL Link. In general, a modem may use
+// G.Hs or some other mechanism to negotiate the specific mode of operation.
+// The OPTN_modeControl CMV is used to select a set of desired modes.
+// The STAT_Mode CMV indicates which mode was actually selected.
+
+#define STAT_ConfigMode_T1413			0x0001
+#define STAT_ConfigMode_G992_2_AB		0x0002
+#define STAT_ConfigMode_G992_1_A		0x0004
+#define STAT_ConfigMode_G992_1_B		0x0008
+#define STAT_ConfigMode_G992_1_C		0x0010
+#define STAT_ConfigMode_G992_2_C		0x0020
+
+#define STAT_ConfigMode_G992_3_A		0x0100
+#define STAT_ConfigMode_G992_3_B		0x0200
+#define STAT_ConfigMode_G992_3_I		0x0400
+#define STAT_ConfigMode_G992_3_J		0x0800
+#define STAT_ConfigMode_G992_3_L		0x1000
+
+#define STAT_ConfigMode_G992_4_A		0x2000
+#define STAT_ConfigMode_G992_4_I		0x4000
+
+#define STAT_ConfigMode_G992_5			0x8000
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_DMTFramingMode
+// FramingMode indicates the DMT framing mde negotiated during initialization. The framing mode
+// status is not applicable in BIS mode and its value is undefined
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define STAT_FramingModeMask			0x0003
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_Misc
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define STAT_OverlappedSpectrum		0x0008
+#define STAT_TCM			0x0010
+#define STAT_TDQ_at_1104	        0x0020
+#define STAT_T1413_Signal_Detected	0x0040
+#define STAT_AnnexL_US_Mask1_PSD    	0x1000	//indicate we actually selected G992.3 AnnexL US PSD mask1
+#define STAT_AnnexL_US_Mask2_PSD   	0x2000	//indicate we actually selected G992.3 AnnexL US PSD mask2
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// STAT_FailureState
+// when the MacroSTate indicates the fail state, FailureState provides a failure code
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define E_CODE_NO_ERROR								0
+#define E_CODE_BAT_TX								1	// TX BAT table is incorrect */
+#define E_CODE_BAT_RX								2	//  RX BAT table is incorrect */
+#define E_CODE_PROFILE								3	//  profile is not selected in fast retrain */
+#define E_CODE_TX_AOC_FIFO_OVERFLOW						4
+#define E_CODE_TRUNCATE_FR							5	//Fast Retrain truncated due to no stored profiles*/
+#define E_CODE_BITLOAD								6	//  bit loading fails */
+#define E_CODE_ST_ERROR								7	//  showtime CRC error */
+#define E_CODE_RESERVED								8	//  using parameters reserved by the ITU-T */
+#define E_CODE_C_TONES								9	//  detected C_TONES */
+#define E_CODE_CODESWAP_ERR							10	//  codeswap not finished in time */
+#define E_CODE_FIFO_OVERFLOW							11	// we have run out of fifo space */
+#define E_CODE_C_BG_DECODE_ERR							12	// error in decoding C-BG message */
+#define E_CODE_C_RATES2_DECODE_ERR						13	// error in decoding C-MSGS2 and C-RATES2 */
+#define E_CODE_RCMedleyRx_C_SEGUE2_Failure					14	//  Timeout after RCMedleyRx waiting for C_SEGUE2 */
+#define E_CODE_RReverbRATx_C_SEGUE2_Failure					15	//  Timeout after RReverbRATx waiting for C_SEGUE2 */
+#define E_CODE_RReverb3Tx_C_SEGUE1_Failure					16	//  Timeout after RReverb3Tx waiting for C_SEGUE1 */
+#define E_CODE_RCCRC2Rx_C_RATES1_DECOD_ERR					17	//  Received CRC not equal to computed CRC */
+#define E_CODE_RCCRC1Rx_C_RATES1_DECOD_ERR					18	//  Received CRC not equal to computed CRC */
+#define E_CODE_RReverb5Tx_C_SEGUE2_Failure					19	//  Timeout after RReverb5Tx waiting for C_SEGUE2 */
+#define E_CODE_RReverb6Tx_C_SEGUE3_Failure					20	//  Timeout after RReverb6Tx waiting for C_SEGUE3 */
+#define E_CODE_RSegue5Tx_C_SEGUE3_Failure					21	//  Timeout after RSegue5Tx waiting for C_SEGUE3 */
+#define E_CODE_RCReverb5Rx_C_SEGUE_Failure					22	//  Timeout after RCReverb5Rx waiting for C_SEGUE */
+#define E_CODE_RCReverbRARx_C_SEGUE2_Failure					23	//  Timeout after RCReverbRARx waiting for C_SEGUE2 */
+#define E_CODE_RCCRC4Rx_CMSGS2_DECOD_ERR					24	//  Received CRC not equal to computed CRC */
+#define E_CODE_RCCRC5Rx_C_BG_DECOD_ERR						25	//  Received CRC not equal to computed CRC */
+#define E_CODE_RCCRC3Rx_DECOD_ERR						26	//  Received CRC not equal to computed CRC */
+#define E_CODE_RCPilot3_DEC_PATH_DEL_TIMEOUT					27	//  DEC Path Delay timeout */
+#define E_CODE_RCPilot3_DEC_TRAINING_TIMEOUT					28	//  DEC Training timeout */
+#define E_CODE_RCReverb3Rx_C_SEGUE1_Failure					29	//  Timeout after RCReverb3Rx waiting for C_SEGUE1 */
+#define E_CODE_RCReverb2Rx_SignalEnd_Failure					30	//  Timeout waiting for the end of RCReverb2Rx signal */
+#define E_CODE_RQuiet2_SignalEnd_Failure					31	//  Timeout waiting for the end of RQuiet2 signal */
+#define E_CODE_RCReverbFR1Rx_Failure						32	//  Timeout waiting for the end of RCReverbFR1Rx signal */
+#define E_CODE_RCPilotFR1Rx_SignalEnd_Failure					33	//  Timeout waiting for the end of RCPilotFR1Rx signal */
+#define E_CODE_RCReverbFR2Rx_C_Segue_Failure					34	//  Timeout after RCReverbFR2Rx waiting for C_SEGUE */
+#define E_CODE_RCReverbFR5Rx_SignalEnd_TIMEOUT					35	//  Timeout waiting for the end of RCReverbFR5Rx signal */
+#define E_CODE_RCReverbFR6Rx_C_SEGUE_Failure					36	//  Timeout after RCReverbFR6Rx waiting for C_SEGUE */
+#define E_CODE_RCReverbFR8Rx_C_SEGUE_FR4_Failure				37	//  Timeout after RCReverbFR8Rx waiting for C_SEGUE_FR4 */
+#define E_CODE_RCReverbFR8Rx_No_PROFILE						38	//  Timeout since no profile was selected */
+#define E_CODE_RCReverbFR8Rx_SignalEnd_TIMEOUT					39	//  Timeout waiting for the end of RCReverbFR8Rx signal */
+#define E_CODE_RCCRCFR1_DECOD_ERR						40	//  Received CRC not equal to computed CRC */
+#define E_CODE_RCRecovRx_SingnalEnd_TIMEOUT					41	//  Timeout waiting for the end of RCRecovRx signal */
+#define E_CODE_RSegueFR5Tx_TX_Not_Ready_TIMEOUT					42	//  Timeout after RSegueFR5Tx waiting for C_SEGUE2 */
+#define E_CODE_RRecovTx_SignalEnd_TIMEOUT					43	//  Timeout waiting for the end of RRecovTx signal */
+#define E_CODE_RCMedleyFRRx_C_SEGUE2_Failure					44	//  Timeout after RCMedleyFRRx waiting for C_SEGUE2 */
+#define E_CODE_CONFIGURATION_PARAMETERS_ERROR					45	// one of the configuration parameters do not meet the standard */
+#define E_CODE_BAD_MEM_ACCESS							46
+#define E_CODE_BAD_INSTRUCTION_ACCESS						47
+#define E_CODE_TX_EOC_FIFO_OVERFLOW						48
+#define E_CODE_RX_EOC_FIFO_OVERFLOW						49
+#define E_CODE_GHS_CD_FLAG_TIME_OUT						50	// Timeout when transmitting Flag in handshake cleardown */
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//STAT_OLRStatus:
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define STAT_OLRPM_IDLE                                 0x0000
+#define STAT_OLRPM_IN_PROGRESS                          0x0001
+#define STAT_OLRPM_COMPLETE                             0x0002
+#define STAT_OLRPM_ABORTED                              0x0003
+#define STAT_OLRPM_RESPONSE				0x0800
+
+#define STAT_OLR_BITSWAP                                0x0010
+#define STAT_OLR_DRR					0x0020
+#define STAT_OLR_SRA					0x0030
+
+//STAT_PMStatus_US:
+#define STAT_PM_CO_REQ                                  0x0004
+#define STAT_PM_SIMPLE_REQ                              0x0010
+#define STAT_PM_L2_REQ					0x0020
+#define STAT_PM_L2_TRIM_REQ				0x0030
+
+// STAT_OLRError_DS, STAT_OLRError_US
+//4 bit response reason code:
+#define RESP_BUSY					0x01
+#define RESP_INVALID_PARAMETERS		            	0x02
+#define RESP_NOT_ENABLED				0x03
+#define RESP_NOT_SUPPORTED			        0x04
+
+//4 bit internal error code (common for OLR and PM)
+#define REQ_INVALID_BiGi				0x10
+#define REQ_INVALID_Lp					0x20
+#define REQ_INVALID_Bpn					0x30
+#define REQ_INVALID_FRAMING_CONSTRAINT			0x40
+#define REQ_NOT_IN_L0_STATE				0x50
+#define REQ_NOT_IN_L2_STATE				0x60
+#define REQ_INVALID_PCB					0x70
+#define REQ_VIOLATES_MARGIN				0x80
+
+//STAT_PMError
+//4 bit response reason code:
+#define RESP_STATE_NOT_DESIRED                          0x03
+#define RESP_INFEASIBLE_PARAMETERS                      0x04
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN register address and bit field definitions
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_ModeControl				0
+#define OPTN_DMTLnkCtl                          	1
+// Reserved                                             2
+#define OPTN_GhsControl					3
+// Reserved                                             4
+#define OPTN_PwrManControl			        5
+#define OPTN_AnnexControl				6
+#define OPTN_ModeControl1				7
+// Reserved                                             8
+#define OPTN_StateMachineCtrl			        9
+// Reserved                                             10
+// Reserved                                             11
+#define OPTN_BisLinkControl				12
+#define OPTN_ATMAddrConfig			        13
+#define OPTN_ATMNumCellConfig				14
+
+// Mode control defines the allowable operating modes of an ADSL link. In general, a modem may ///
+// use G.Hs or some other mechanism to negotiate the specific mode of operation. ///
+// The OPTN_ModeControl CMV is used to select a set of desired modes ///
+// The STAT_ModeControl CMV indicates which mode was actually selected ///
+
+// OPTN_ModeControl
+#define OPTN_ConfigMode_T1413			0x0001
+#define OPTN_ConfigMode_G992_2_AB		0x0002
+#define OPTN_ConfigMode_G992_1_A		0x0004
+#define OPTN_ConfigMode_G992_1_B		0x0008
+#define OPTN_ConfigMode_G992_1_C		0x0010
+#define OPTN_ConfigMode_G992_2_C		0x0020
+
+#define OPTN_ConfigMode_G992_3_A		0x0100
+#define OPTN_ConfigMode_G992_3_B		0x0200
+#define OPTN_ConfigMode_G992_3_I		0x0400
+#define OPTN_ConfigMode_G992_3_J		0x0800
+#define OPTN_ConfigMode_G992_3_L		0x1000
+
+#define OPTN_ConfigMode_G992_4_A		0x2000
+#define OPTN_ConfigMode_G992_4_I		0x4000
+
+#define OPTN_ConfigMode_G992_5			0x8000
+
+// OPTN_PwrManControl
+#define OPTN_PwrManWakeUpGhs			0x1
+#define OPTN_PwrManWakeUpFR			0x2
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_DMT Link Control
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+#define OPTN_DMT_DualLatency_Dis                0x200
+#define OPTN_DMT_S_Dis                          0x100
+#define OPTN_DMT_FRAMINGMODE                 	0x1
+#define OPTN_DMT_FRAMINGMODE_MASK     		0x7
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_BIS Link Control
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+#define OPTN_BisLinkContrl_LineProbeDis         0x1
+#define OPTN_BisLinkContrl_DSBlackBitsEn        0x2
+#define OPTN_BisLinkContrl_DiagnosticModeEn     0x4
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// OPTN_GhsControl
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//
+// for OPTN_GhsControl, we will assign 16bit word as follows
+// bit 0~3: set the control over which start(initial) message CPE will send:
+//
+//              BIT: 2  1  0
+//                       0  0  1  CLR
+//                       0  1  0  MR
+//                       0  1  1  MS
+//                       1  0  0  MP
+//
+//  // bit 4~6: set the control over which message will be sent when we get at lease one CL/CLR exchange
+//        BIT: 5  4
+//                   0  1  MS
+//                       1  0  MR
+//                       1  1  MP
+//
+//  // bit 15: RT initiated G.hs sample sessions one through eight.  Session one is default.
+//        BIT: 15
+//                        1  means session one
+//
+///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_GHS_ST_GHS					0x8000
+#define OPTN_GHS_INIT_MASK		            	0x000F
+#define OPTN_GHS_RESP_MASK				0x00F0
+
+#define OPTN_RTInitTxMsg_CLR		           	0x0001
+#define OPTN_RTInitTxMsg_MR		           	0x0002
+#define OPTN_RTInitTxMsg_MS		            	0x0003
+#define OPTN_RTInitTxMsg_MP		            	0x0004
+
+#define OPTN_RTRespTxMsg_MS				0x0010
+#define OPTN_RTRespTxMsg_MR				0x0020
+#define OPTN_RTRespTxMsg_MP				0x0030
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//      OPTN_AnnexControl
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+// G.992.3 Annex A/L1/L2 US PSD Mask preferred
+
+#define OPTN_G992_3_AnnexA_PreferredModeMask		0x3000
+#define OPTN_G992_3_AnnexA_PreferredModeA		0x0000	// default AnnexA PSD mask ///
+#define OPTN_G992_3_AnnexA_PreferredModeL1	        0x1000	// AnnexL wide spectrum upstream PSD mask ///
+#define OPTN_G992_3_AnnexA_PreferredModeL2	        0x2000	// AnnexL narrow spectrum upstream PSD mask ///
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//OPTN_ATMAddrConfig
+// Bits 4:0             are Utopia address for BC1
+// Bits 9:5             are Utopia address for BC0
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_UTPADDR_BC1				0x001F
+#define OPTN_UTPADDR_BC0				0x03E0
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+//OPTN_ATMNumCellConfig
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+#define OPTN_BC1_NUM_CELL_PAGES				0x000F	// Bits 0:3 ///
+#define OPTN_BC0_NUM_CELL_PAGES				0x00F0	// Bits 4:7 ///
+
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+// CNFG register address field ///
+//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
+
+///////////////////////////////////////////
+// these cmvs are used by bis handshake ///
+///////////////////////////////////////////
+
+// Each of the CNFG_TPS entries points to a structure of type (TPS_TC_BearerChannel_t)
+#define CNFG_TPS_TC_DS0					0
+#define CNFG_TPS_TC_DS1					1
+#define CNFG_TPS_TC_US0					2
+#define CNFG_TPS_TC_US1					3
+
+#define CNFG_HDLC_Overhead_Requirements	                4
+
+// Each of the CNFG_PMS entries points to a structure of type (PMS_TC_LatencyPath_t)
+#define CNFG_PMS_TC_DS0					5
+#define CNFG_PMS_TC_DS1					6
+#define CNFG_PMS_TC_US0					7
+#define CNFG_PMS_TC_US1					8
+
+// CNFG_PMD_PARAMETERS points to a structure of type (PMD_params_t)
+#define CNFG_PMD_PARAMETERS				9
+
+////////////////////////////////////////////////////////////
+// these cmvs are used by bis training and showtime code ///
+////////////////////////////////////////////////////////////
+
+////////////////
+// Tx Config ///
+////////////////
+#define CNFG_tx_Cnfg_Nbc				10
+#define CNFG_tx_Cnfg_Nlp				11
+#define CNFG_tx_Cnfg_Rp					12
+#define CNFG_tx_Cnfg_Mp					13
+#define CNFG_tx_Cnfg_Lp					14
+#define CNFG_tx_Cnfg_Tp					15
+#define CNFG_tx_Cnfg_Dp					16
+#define CNFG_tx_Cnfg_Bpn				17
+#define CNFG_tx_Cnfg_FramingMode		        18
+#define CNFG_tx_Cnfg_MSGLp			        19
+#define CNFG_tx_Cnfg_MSGc				20
+
+////////////////
+// Rx Config ///
+////////////////
+#define CNFG_rx_Cnfg_Nbc				21
+#define CNFG_rx_Cnfg_Nlp				22
+#define CNFG_rx_Cnfg_Rp					23
+#define CNFG_rx_Cnfg_Mp					24
+#define CNFG_rx_Cnfg_Lp					25
+#define CNFG_rx_Cnfg_Tp					26
+#define CNFG_rx_Cnfg_Dp					27
+#define CNFG_rx_Cnfg_Bpn				28
+#define CNFG_rx_Cnfg_FramingMode	                29
+#define CNFG_rx_Cnfg_MSGLp		                30
+#define CNFG_rx_Cnfg_MSGc				31
+
+#define CNFG_tx_Cnfg_BCnToLPp				32
+#define CNFG_rx_Cnfg_BCnToLPp				33
+
+#endif
diff --git a/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h
new file mode 100644
index 0000000000..b1c12d1d01
--- /dev/null
+++ b/target/linux/ifxmips/files/include/asm-mips/ifxmips/ifxmips_mei_linux.h
@@ -0,0 +1,111 @@
+/******************************************************************************
+**
+** FILE NAME    : ifxmips_mei_linux.h
+** PROJECT      : Danube
+** MODULES      : MEI
+**
+** DATE         : 1 Jan 2006
+** AUTHOR       : TC Chen
+** DESCRIPTION  : MEI Driver
+** COPYRIGHT    :       Copyright (c) 2006
+**                      Infineon Technologies AG
+**                      Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+**    This program is free software; you can redistribute it and/or modify
+**    it under the terms of the GNU General Public License as published by
+**    the Free Software Foundation; either version 2 of the License, or
+**    (at your option) any later version.
+**
+** HISTORY
+** $Version $Date      $Author     $Comment
+*******************************************************************************/
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <asm/semaphore.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <asm/uaccess.h>
+
+#undef CONFIG_DEVFS_FS		//165204:henryhsu devfs will make mei open file fail.
+
+#ifdef CONFIG_DEVFS_FS
+#include <linux/devfs_fs_kernel.h>
+#endif
+#ifdef CONFIG_PROC_FS
+#include <linux/proc_fs.h>
+#endif
+
+#include <linux/list.h>
+#include <linux/delay.h>
+#define __LINUX__
+
+#ifdef CONFIG_PROC_FS
+#define PROC_ITEMS 8
+#define MEI_DIRNAME     "mei"
+#endif
+
+#include <asm/ifxmips/ifxmips.h>
+#include <asm/ifxmips/ifxmips_irq.h>
+#include <asm/ifxmips/ifxmips_mei.h>
+#include <asm/ifxmips/ifxmips_mei_app.h>
+#include <asm/ifxmips/ifxmips_mei_ioctl.h>
+#include <asm/ifxmips/ifxmips_mei_app_ioctl.h>
+#include <asm/ifxmips/ifxmips_gpio.h>
+#include <asm/ifxmips/ifxmips_led.h>
+
+#ifdef CONFIG_DEVFS_FS
+#define IFXMIPS_DEVNAME  "ifxmips"
+#endif //ifdef CONFIG_DEVFS_FS
+
+#define MEI_LOCKINT(var) \
+        local_save_flags(var);\
+        local_irq_disable()
+#define MEI_UNLOCKINT(var) \
+        local_irq_restore(var)
+
+#define MEI_MUTEX_INIT(id,flag) \
+        sema_init(&id,flag)
+#define MEI_MUTEX_LOCK(id) \
+        down_interruptible(&id)
+#define MEI_MUTEX_UNLOCK(id) \
+        up(&id)
+
+#define MEI_MASK_AND_ACK_IRQ \
+        mask_and_ack_ifxmips_irq
+
+#define MEI_DISABLE_IRQ \
+        disable_irq
+#define MEI_ENABLE_IRQ \
+        enable_irq
+
+#define MEI_WAIT(ms) \
+        {\
+                set_current_state(TASK_INTERRUPTIBLE);\
+                schedule_timeout(ms);\
+        }
+
+#define MEI_INIT_WAKELIST(name,queue) \
+        init_waitqueue_head(&queue)
+
+#define MEI_WAIT_EVENT_TIMEOUT(ev,timeout)\
+        interruptible_sleep_on_timeout(&ev,timeout)
+
+#define MEI_WAIT_EVENT(ev)\
+        interruptible_sleep_on(&ev)
+#define MEI_WAKEUP_EVENT(ev)\
+        wake_up_interruptible(&ev)
+
+typedef unsigned long MEI_intstat_t;
+typedef struct semaphore MEI_mutex_t;
+typedef struct file MEI_file_t;
+typedef struct inode MEI_inode_t;
+
+extern void mask_and_ack_ifxmips_irq (unsigned int irq_nr);