diff options
author | David Bauer <mail@david-bauer.net> | 2019-07-11 17:15:48 +0200 |
---|---|---|
committer | David Bauer <mail@david-bauer.net> | 2019-07-11 21:32:39 +0200 |
commit | 14e0e4f138e35c3e2a15cc3a836c939547ee053b (patch) | |
tree | 6cf0e9eb7b2a4f3f5c8ae0452aff83c42ceb3262 /target/toolchain/Config.in | |
parent | c52ca08d40086c6f5aff168178dc1948eae19b4a (diff) | |
download | upstream-14e0e4f138e35c3e2a15cc3a836c939547ee053b.tar.gz upstream-14e0e4f138e35c3e2a15cc3a836c939547ee053b.tar.bz2 upstream-14e0e4f138e35c3e2a15cc3a836c939547ee053b.zip |
ramips: add support for ASUS RT-AC57U
SoC: MediaTek MT7621AT
RAM: 128M (Winbond W631GG6KB-15)
FLASH: 16MB (Spansion S25FL128SA)
WiFi: MediaTek MT7603EN bgn 2SS
WiFi: MediaTek MT7612EN nac 2SS
BTN: Reset - WPS
LED: - Power
- LAN {1-4}
- WAN
- WiFi 2.4 GHz
- WiFi 5 GHz
- USB
UART: UART is present next to the Power LED.
TX - RX - GND - 3V3 / 57600-8N1
3V3 is the nearest one to the Power LED.
Installation
------------
Via TFTP:
1. Set your computers IP-Address to 192.168.1.75.
2. Power up the Router with the Reset button pressed.
3. Release the Reset button after 5 seconds.
4. Upload OpenWRT sysupgrade image via TFTP:
> tftp -4 -v -m binary 192.168.1.1 -c put <IMAGE>
Via SSH:
Note: User/password for SSH is identical with the one used in the
Web-interface.
1. Complete the initial setup wizard.
2. Activate SSH under "Administration" -> "System".
3. Transfer the OpenWrt sysupgrade image via scp:
> scp owrt.bin admin@192.168.1.1:/tmp
4. Connect via SSH to the router.
> ssh admin@192.168.1.1
5. Write the OpenWrt image to flash.
> mtd-write -i /tmp/owrt.bin -d linux
6. Reboot the router
> reboot
Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'target/toolchain/Config.in')
0 files changed, 0 insertions, 0 deletions