move spi_gpio driver into the kernel, clean-up SPI modules

SVN-Revision: 10844

6 files changed, 359 insertions, 0 deletions

diff --git a/target/linux/generic-2.6/config-2.6.23 b/target/linux/generic-2.6/config-2.6.23
index 8d7a6cb3eb..3e755eb361 100644
--- a/target/linux/generic-2.6/config-2.6.23
+++ b/target/linux/generic-2.6/config-2.6.23
@@ -726,6 +726,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MOUSE_PC110PAD is not set
 CONFIG_MSDOS_FS=m
 CONFIG_MSDOS_PARTITION=y
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
 CONFIG_MTD_ROOTFS_ROOT_DEV=y
@@ -1386,6 +1388,8 @@ CONFIG_SOUND=m
 # CONFIG_SPARSEMEM_MANUAL is not set
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SQUASHFS=y
 # CONFIG_SQUASHFS_EMBEDDED is not set
diff --git a/target/linux/generic-2.6/config-2.6.24 b/target/linux/generic-2.6/config-2.6.24
index 688285582e..efd5d62a94 100644
--- a/target/linux/generic-2.6/config-2.6.24
+++ b/target/linux/generic-2.6/config-2.6.24
@@ -746,6 +746,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MOUSE_PC110PAD is not set
 CONFIG_MSDOS_FS=m
 CONFIG_MSDOS_PARTITION=y
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
 # CONFIG_MTD_INTEL_VR_NOR is not set
 # CONFIG_MTD_NAND is not set
 # CONFIG_MTD_OOPS is not set
@@ -1424,6 +1426,8 @@ CONFIG_SOUND=m
 # CONFIG_SPARSEMEM_MANUAL is not set
 # CONFIG_SPI is not set
 # CONFIG_SPI_MASTER is not set
+# CONFIG_SPI_AT25 is not set
+# CONFIG_SPI_TLE62X0 is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_SQUASHFS=y
 # CONFIG_SQUASHFS_EMBEDDED is not set
diff --git a/target/linux/generic-2.6/files/drivers/spi/spi_gpio.c b/target/linux/generic-2.6/files/drivers/spi/spi_gpio.c
new file mode 100644
index 0000000000..31048acc3f
--- /dev/null
+++ b/target/linux/generic-2.6/files/drivers/spi/spi_gpio.c
@@ -0,0 +1,242 @@
+/*
+ * Bitbanging SPI bus driver using GPIO API
+ *
+ * Copyright (c) 2008 Piotr Skamruk
+ * Copyright (c) 2008 Michael Buesch
+ *
+ * based on spi_s3c2410_gpio.c
+ *   Copyright (c) 2006 Ben Dooks
+ *   Copyright (c) 2006 Simtec Electronics
+ * and on i2c-gpio.c
+ *   Copyright (C) 2007 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_bitbang.h>
+#include "linux/spi/spi_gpio.h" //XXX
+#include <asm/gpio.h>
+
+
+struct spi_gpio {
+	struct spi_bitbang bitbang;
+	struct spi_gpio_platform_data *info;
+	struct platform_device *pdev;
+	struct spi_board_info bi;
+};
+
+
+static inline struct spi_gpio *spidev_to_sg(struct spi_device *dev)
+{
+	return dev->controller_data;
+}
+
+static inline void setsck(struct spi_device *dev, int val)
+{
+	struct spi_gpio *sp = spidev_to_sg(dev);
+	gpio_set_value(sp->info->pin_clk, val ? 1 : 0);
+}
+
+static inline void setmosi(struct spi_device *dev, int val )
+{
+	struct spi_gpio *sp = spidev_to_sg(dev);
+	gpio_set_value(sp->info->pin_mosi, val ? 1 : 0);
+}
+
+static inline u32 getmiso(struct spi_device *dev)
+{
+	struct spi_gpio *sp = spidev_to_sg(dev);
+	return gpio_get_value(sp->info->pin_miso) ? 1 : 0;
+}
+
+static inline void do_spidelay(struct spi_device *dev, unsigned nsecs)
+{
+	struct spi_gpio *sp = spidev_to_sg(dev);
+
+	if (!sp->info->no_spi_delay)
+		ndelay(nsecs);
+}
+
+#define spidelay(nsecs) do {					\
+	/* Steal the spi_device pointer from our caller.	\
+	 * The bitbang-API should probably get fixed here... */	\
+	do_spidelay(spi, nsecs);				\
+  } while (0)
+
+#define EXPAND_BITBANG_TXRX
+#include <linux/spi/spi_bitbang.h>
+
+static u32 spi_gpio_txrx_mode0(struct spi_device *spi,
+			       unsigned nsecs, u32 word, u8 bits)
+{
+        return bitbang_txrx_be_cpha0(spi, nsecs, 0, word, bits);
+}
+
+static u32 spi_gpio_txrx_mode1(struct spi_device *spi,
+			       unsigned nsecs, u32 word, u8 bits)
+{
+        return bitbang_txrx_be_cpha1(spi, nsecs, 0, word, bits);
+}
+
+static u32 spi_gpio_txrx_mode2(struct spi_device *spi,
+			       unsigned nsecs, u32 word, u8 bits)
+{
+        return bitbang_txrx_be_cpha0(spi, nsecs, 1, word, bits);
+}
+
+static u32 spi_gpio_txrx_mode3(struct spi_device *spi,
+			       unsigned nsecs, u32 word, u8 bits)
+{
+        return bitbang_txrx_be_cpha1(spi, nsecs, 1, word, bits);
+}
+
+static void spi_gpio_chipselect(struct spi_device *dev, int on)
+{
+	struct spi_gpio *sp = spidev_to_sg(dev);
+
+	if (sp->info->cs_activelow)
+		on = !on;
+	gpio_set_value(sp->info->pin_cs, on ? 1 : 0);
+}
+
+static int spi_gpio_probe(struct platform_device *pdev)
+{
+	struct spi_master *master;
+	struct spi_gpio_platform_data *pdata;
+	struct spi_gpio *sp;
+	struct spi_device *spidev;
+	int err;
+
+	pdata = pdev->dev.platform_data;
+	if (!pdata)
+		return -ENXIO;
+
+	err = -ENOMEM;
+	master = spi_alloc_master(&pdev->dev, sizeof(struct spi_gpio));
+	if (!master)
+		goto err_alloc_master;
+
+	sp = spi_master_get_devdata(master);
+	platform_set_drvdata(pdev, sp);
+	sp->info = pdata;
+
+	err = gpio_request(pdata->pin_clk, "spi_clock");
+	if (err)
+		goto err_request_clk;
+	err = gpio_request(pdata->pin_mosi, "spi_mosi");
+	if (err)
+		goto err_request_mosi;
+	err = gpio_request(pdata->pin_miso, "spi_miso");
+	if (err)
+		goto err_request_miso;
+	err = gpio_request(pdata->pin_cs, "spi_cs");
+	if (err)
+		goto err_request_cs;
+
+	sp->bitbang.master = spi_master_get(master);
+	sp->bitbang.master->bus_num = -1;
+	sp->bitbang.master->num_chipselect = 1;
+	sp->bitbang.chipselect = spi_gpio_chipselect;
+	sp->bitbang.txrx_word[SPI_MODE_0] = spi_gpio_txrx_mode0;
+	sp->bitbang.txrx_word[SPI_MODE_1] = spi_gpio_txrx_mode1;
+	sp->bitbang.txrx_word[SPI_MODE_2] = spi_gpio_txrx_mode2;
+	sp->bitbang.txrx_word[SPI_MODE_3] = spi_gpio_txrx_mode3;
+
+	gpio_direction_output(pdata->pin_clk, 0);
+	gpio_direction_output(pdata->pin_mosi, 0);
+	gpio_direction_output(pdata->pin_cs,
+			      pdata->cs_activelow ? 1 : 0);
+	gpio_direction_input(pdata->pin_miso);
+
+	err = spi_bitbang_start(&sp->bitbang);
+	if (err)
+		goto err_no_bitbang;
+	err = pdata->boardinfo_setup(&sp->bi, master,
+				     pdata->boardinfo_setup_data);
+	if (err)
+		goto err_bi_setup;
+	sp->bi.controller_data = sp;
+	spidev = spi_new_device(master, &sp->bi);
+	if (!spidev)
+		goto err_new_dev;
+
+	return 0;
+
+err_new_dev:
+err_bi_setup:
+	spi_bitbang_stop(&sp->bitbang);
+err_no_bitbang:
+	spi_master_put(sp->bitbang.master);
+	gpio_free(pdata->pin_cs);
+err_request_cs:
+	gpio_free(pdata->pin_miso);
+err_request_miso:
+	gpio_free(pdata->pin_mosi);
+err_request_mosi:
+	gpio_free(pdata->pin_clk);
+err_request_clk:
+	kfree(master);
+
+err_alloc_master:
+	return err;
+}
+
+static int __devexit spi_gpio_remove(struct platform_device *pdev)
+{
+	struct spi_gpio *sp;
+	struct spi_gpio_platform_data *pdata;
+
+	pdata = pdev->dev.platform_data;
+	sp = platform_get_drvdata(pdev);
+
+	gpio_free(pdata->pin_clk);
+	gpio_free(pdata->pin_mosi);
+	gpio_free(pdata->pin_miso);
+	gpio_free(pdata->pin_cs);
+	spi_bitbang_stop(&sp->bitbang);
+	spi_master_put(sp->bitbang.master);
+
+	return 0;
+}
+
+static struct platform_driver spi_gpio_driver = {
+	.driver		= {
+		.name	= "spi-gpio",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= spi_gpio_probe,
+	.remove		= __devexit_p(spi_gpio_remove),
+};
+
+static int __init spi_gpio_init(void)
+{
+	int err;
+
+	err = platform_driver_register(&spi_gpio_driver);
+	if (err)
+		printk(KERN_ERR "spi-gpio: register failed: %d\n", err);
+
+	return err;
+}
+module_init(spi_gpio_init);
+
+static void __exit spi_gpio_exit(void)
+{
+	platform_driver_unregister(&spi_gpio_driver);
+}
+module_exit(spi_gpio_exit);
+
+MODULE_AUTHOR("Piot Skamruk <piotr.skamruk at gmail.com>");
+MODULE_AUTHOR("Michael Buesch");
+MODULE_DESCRIPTION("Platform independent GPIO bitbangling SPI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/target/linux/generic-2.6/files/include/linux/spi/spi_gpio.h b/target/linux/generic-2.6/files/include/linux/spi/spi_gpio.h
new file mode 100644
index 0000000000..8e7d4b189d
--- /dev/null
+++ b/target/linux/generic-2.6/files/include/linux/spi/spi_gpio.h
@@ -0,0 +1,53 @@
+/*
+ * spi_gpio interface to platform code
+ *
+ * Copyright (c) 2008 Piotr Skamruk
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _LINUX_SPI_SPI_GPIO
+#define _LINUX_SPI_SPI_GPIO
+
+#include <linux/types.h>
+#include <linux/spi/spi.h>
+
+
+/** struct spi_gpio_platform_data - Data definitions for a SPI-GPIO device.
+ * This structure holds information about a GPIO-based SPI device.
+ *
+ * @pin_clk: The GPIO pin number of the CLOCK pin.
+ *
+ * @pin_miso: The GPIO pin number of the MISO pin.
+ *
+ * @pin_mosi: The GPIO pin number of the MOSI pin.
+ *
+ * @pin_cs: The GPIO pin number of the CHIPSELECT pin.
+ *
+ * @cs_activelow: If true, the chip is selected when the CS line is low.
+ *
+ * @no_spi_delay: If true, no delay is done in the lowlevel bitbanging.
+ *                Note that doing no delay is not standards compliant,
+ *                but it might be needed to speed up transfers on some
+ *                slow embedded machines.
+ *
+ * @boardinfo_setup: This callback is called after the
+ *                   SPI master device was registered, but before the
+ *                   device is registered.
+ * @boardinfo_setup_data: Data argument passed to boardinfo_setup().
+ */
+struct spi_gpio_platform_data {
+	unsigned int pin_clk;
+	unsigned int pin_miso;
+	unsigned int pin_mosi;
+	unsigned int pin_cs;
+	bool cs_activelow;
+	bool no_spi_delay;
+	int (*boardinfo_setup)(struct spi_board_info *bi,
+			       struct spi_master *master,
+			       void *data);
+	void *boardinfo_setup_data;
+};
+
+#endif /* _LINUX_SPI_SPI_GPIO */
diff --git a/target/linux/generic-2.6/patches-2.6.23/921-gpio_spi_driver.patch b/target/linux/generic-2.6/patches-2.6.23/921-gpio_spi_driver.patch
new file mode 100644
index 0000000000..aa4e6ee0ac
--- /dev/null
+++ b/target/linux/generic-2.6/patches-2.6.23/921-gpio_spi_driver.patch
@@ -0,0 +1,28 @@
+Index: linux-2.6.23.16/drivers/spi/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/drivers/spi/Kconfig
++++ linux-2.6.23.16/drivers/spi/Kconfig
+@@ -100,6 +100,11 @@ config SPI_BUTTERFLY
+ 	  inexpensive battery powered microcontroller evaluation board.
+ 	  This same cable can be used to flash new firmware.
+ 
++config SPI_GPIO
++	tristate "GPIO API based bitbanging SPI controller"
++	depends on SPI_MASTER && GENERIC_GPIO && EXPERIMENTAL
++	select SPI_BITBANG
++
+ config SPI_IMX
+ 	tristate "Freescale iMX SPI controller"
+ 	depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
+Index: linux-2.6.23.16/drivers/spi/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/drivers/spi/Makefile
++++ linux-2.6.23.16/drivers/spi/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.
+ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
+ obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
++obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
diff --git a/target/linux/generic-2.6/patches-2.6.24/921-gpio_spi_driver.patch b/target/linux/generic-2.6/patches-2.6.24/921-gpio_spi_driver.patch
new file mode 100644
index 0000000000..aa4e6ee0ac
--- /dev/null
+++ b/target/linux/generic-2.6/patches-2.6.24/921-gpio_spi_driver.patch
@@ -0,0 +1,28 @@
+Index: linux-2.6.23.16/drivers/spi/Kconfig
+===================================================================
+--- linux-2.6.23.16.orig/drivers/spi/Kconfig
++++ linux-2.6.23.16/drivers/spi/Kconfig
+@@ -100,6 +100,11 @@ config SPI_BUTTERFLY
+ 	  inexpensive battery powered microcontroller evaluation board.
+ 	  This same cable can be used to flash new firmware.
+ 
++config SPI_GPIO
++	tristate "GPIO API based bitbanging SPI controller"
++	depends on SPI_MASTER && GENERIC_GPIO && EXPERIMENTAL
++	select SPI_BITBANG
++
+ config SPI_IMX
+ 	tristate "Freescale iMX SPI controller"
+ 	depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL
+Index: linux-2.6.23.16/drivers/spi/Makefile
+===================================================================
+--- linux-2.6.23.16.orig/drivers/spi/Makefile
++++ linux-2.6.23.16/drivers/spi/Makefile
+@@ -16,6 +16,7 @@ obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.
+ obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
+ obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
+ obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
++obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
+ obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
+ obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
+ obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o